Upgrade to V8 3.5
Merge V8 3.5.10.24
Simple merge required updates to makefiles only.
Bug: 5688872
Change-Id: I0acdb9a1a53919d84e9a7525308e8371739d2f06
diff --git a/Makefile b/Makefile
new file mode 100644
index 0000000..3008779
--- /dev/null
+++ b/Makefile
@@ -0,0 +1,171 @@
+# Copyright 2011 the V8 project authors. All rights reserved.
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are
+# met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above
+# copyright notice, this list of conditions and the following
+# disclaimer in the documentation and/or other materials provided
+# with the distribution.
+# * Neither the name of Google Inc. nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+
+# Variable default definitions. Override them by exporting them in your shell.
+CXX ?= "g++" # For distcc: export CXX="distcc g++"
+LINK ?= "g++"
+OUTDIR ?= out
+TESTJOBS ?= -j16
+GYPFLAGS ?=
+
+# Special build flags. Use them like this: "make library=shared"
+
+# library=shared || component=shared_library
+ifeq ($(library), shared)
+ GYPFLAGS += -Dcomponent=shared_library
+endif
+ifdef component
+ GYPFLAGS += -Dcomponent=$(component)
+endif
+# console=readline
+ifdef console
+ GYPFLAGS += -Dconsole=$(console)
+endif
+# disassembler=on
+ifeq ($(disassembler), on)
+ GYPFLAGS += -Dv8_enable_disassembler=1
+endif
+# snapshot=off
+ifeq ($(snapshot), off)
+ GYPFLAGS += -Dv8_use_snapshot='false'
+endif
+# gdbjit=on
+ifeq ($(gdbjit), on)
+ GYPFLAGS += -Dv8_enable_gdbjit=1
+endif
+# liveobjectlist=on
+ifeq ($(liveobjectlist), on)
+ GYPFLAGS += -Dv8_use_liveobjectlist=true
+endif
+# vfp3=off
+ifeq ($(vfp3), off)
+ GYPFLAGS += -Dv8_can_use_vfp_instructions=false
+else
+ GYPFLAGS += -Dv8_can_use_vfp_instructions=true
+endif
+
+# ----------------- available targets: --------------------
+# - any arch listed in ARCHES (see below)
+# - any mode listed in MODES
+# - every combination <arch>.<mode>, e.g. "ia32.release"
+# - any of the above with .check appended, e.g. "ia32.release.check"
+# - default (no target specified): build all ARCHES and MODES
+# - "check": build all targets and run all tests
+# - "<arch>.clean" for any <arch> in ARCHES
+# - "clean": clean all ARCHES
+
+# ----------------- internal stuff ------------------------
+
+# Architectures and modes to be compiled. Consider these to be internal
+# variables, don't override them (use the targets instead).
+ARCHES = ia32 x64 arm
+MODES = release debug
+
+# List of files that trigger Makefile regeneration:
+GYPFILES = build/all.gyp build/common.gypi build/standalone.gypi \
+ preparser/preparser.gyp samples/samples.gyp src/d8.gyp \
+ test/cctest/cctest.gyp tools/gyp/v8.gyp
+
+# Generates all combinations of ARCHES and MODES, e.g. "ia32.release".
+BUILDS = $(foreach mode,$(MODES),$(addsuffix .$(mode),$(ARCHES)))
+# Generates corresponding test targets, e.g. "ia32.release.check".
+CHECKS = $(addsuffix .check,$(BUILDS))
+# File where previously used GYPFLAGS are stored.
+ENVFILE = $(OUTDIR)/environment
+
+.PHONY: all clean $(ENVFILE).new \
+ $(ARCHES) $(MODES) $(BUILDS) $(addsuffix .clean,$(ARCHES))
+
+# Target definitions. "all" is the default.
+all: $(MODES)
+
+# Compile targets. MODES and ARCHES are convenience targets.
+.SECONDEXPANSION:
+$(MODES): $(addsuffix .$$@,$(ARCHES))
+
+$(ARCHES): $(addprefix $$@.,$(MODES))
+
+# Defines how to build a particular target (e.g. ia32.release).
+$(BUILDS): $(OUTDIR)/Makefile-$$(basename $$@)
+ @$(MAKE) -C "$(OUTDIR)" -f Makefile-$(basename $@) \
+ CXX="$(CXX)" LINK="$(LINK)" \
+ BUILDTYPE=$(shell echo $(subst .,,$(suffix $@)) | \
+ python -c "print raw_input().capitalize()") \
+ builddir="$(shell pwd)/$(OUTDIR)/$@"
+
+# Test targets.
+check: all
+ @tools/test-wrapper-gypbuild.py $(TESTJOBS) --outdir=$(OUTDIR)
+
+$(addsuffix .check,$(MODES)): $$(basename $$@)
+ @tools/test-wrapper-gypbuild.py $(TESTJOBS) --outdir=$(OUTDIR) \
+ --mode=$(basename $@)
+
+$(addsuffix .check,$(ARCHES)): $$(basename $$@)
+ @tools/test-wrapper-gypbuild.py $(TESTJOBS) --outdir=$(OUTDIR) \
+ --arch=$(basename $@)
+
+$(CHECKS): $$(basename $$@)
+ @tools/test-wrapper-gypbuild.py $(TESTJOBS) --outdir=$(OUTDIR) \
+ --arch-and-mode=$(basename $@)
+
+# Clean targets. You can clean each architecture individually, or everything.
+$(addsuffix .clean,$(ARCHES)):
+ rm -f $(OUTDIR)/Makefile-$(basename $@)
+ rm -rf $(OUTDIR)/$(basename $@).release
+ rm -rf $(OUTDIR)/$(basename $@).debug
+ find $(OUTDIR) -regex '.*\(host\|target\)-$(basename $@)\.mk' -delete
+
+clean: $(addsuffix .clean,$(ARCHES))
+
+# GYP file generation targets.
+$(OUTDIR)/Makefile-ia32: $(GYPFILES) $(ENVFILE)
+ build/gyp/gyp --generator-output="$(OUTDIR)" build/all.gyp \
+ -Ibuild/standalone.gypi --depth=. -Dtarget_arch=ia32 \
+ -S-ia32 $(GYPFLAGS)
+
+$(OUTDIR)/Makefile-x64: $(GYPFILES) $(ENVFILE)
+ build/gyp/gyp --generator-output="$(OUTDIR)" build/all.gyp \
+ -Ibuild/standalone.gypi --depth=. -Dtarget_arch=x64 \
+ -S-x64 $(GYPFLAGS)
+
+$(OUTDIR)/Makefile-arm: $(GYPFILES) $(ENVFILE)
+ build/gyp/gyp --generator-output="$(OUTDIR)" build/all.gyp \
+ -Ibuild/standalone.gypi --depth=. -Ibuild/armu.gypi \
+ -S-arm $(GYPFLAGS)
+
+# Replaces the old with the new environment file if they're different, which
+# will trigger GYP to regenerate Makefiles.
+$(ENVFILE): $(ENVFILE).new
+ @if test -r $(ENVFILE) && cmp $(ENVFILE).new $(ENVFILE) >/dev/null; \
+ then rm $(ENVFILE).new; \
+ else mv $(ENVFILE).new $(ENVFILE); fi
+
+# Stores current GYPFLAGS in a file.
+$(ENVFILE).new:
+ @mkdir -p $(OUTDIR); echo "GYPFLAGS=$(GYPFLAGS)" > $(ENVFILE).new;