Move V8 to external/v8
Change-Id: If68025d67453785a651c5dfb34fad298c16676a4
diff --git a/src/arm/disasm-arm.cc b/src/arm/disasm-arm.cc
new file mode 100644
index 0000000..6431483
--- /dev/null
+++ b/src/arm/disasm-arm.cc
@@ -0,0 +1,978 @@
+// Copyright 2007-2009 the V8 project authors. All rights reserved.
+// Redistribution and use in source and binary forms, with or without
+// modification, are permitted provided that the following conditions are
+// met:
+//
+// * Redistributions of source code must retain the above copyright
+// notice, this list of conditions and the following disclaimer.
+// * Redistributions in binary form must reproduce the above
+// copyright notice, this list of conditions and the following
+// disclaimer in the documentation and/or other materials provided
+// with the distribution.
+// * Neither the name of Google Inc. nor the names of its
+// contributors may be used to endorse or promote products derived
+// from this software without specific prior written permission.
+//
+// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+// A Disassembler object is used to disassemble a block of code instruction by
+// instruction. The default implementation of the NameConverter object can be
+// overriden to modify register names or to do symbol lookup on addresses.
+//
+// The example below will disassemble a block of code and print it to stdout.
+//
+// NameConverter converter;
+// Disassembler d(converter);
+// for (byte* pc = begin; pc < end;) {
+// char buffer[128];
+// buffer[0] = '\0';
+// byte* prev_pc = pc;
+// pc += d.InstructionDecode(buffer, sizeof buffer, pc);
+// printf("%p %08x %s\n",
+// prev_pc, *reinterpret_cast<int32_t*>(prev_pc), buffer);
+// }
+//
+// The Disassembler class also has a convenience method to disassemble a block
+// of code into a FILE*, meaning that the above functionality could also be
+// achieved by just calling Disassembler::Disassemble(stdout, begin, end);
+
+
+#include <assert.h>
+#include <stdio.h>
+#include <stdarg.h>
+#include <string.h>
+#ifndef WIN32
+#include <stdint.h>
+#endif
+
+#include "v8.h"
+
+#include "constants-arm.h"
+#include "disasm.h"
+#include "macro-assembler.h"
+#include "platform.h"
+
+
+namespace assembler {
+namespace arm {
+
+namespace v8i = v8::internal;
+
+
+//------------------------------------------------------------------------------
+
+// Decoder decodes and disassembles instructions into an output buffer.
+// It uses the converter to convert register names and call destinations into
+// more informative description.
+class Decoder {
+ public:
+ Decoder(const disasm::NameConverter& converter,
+ v8::internal::Vector<char> out_buffer)
+ : converter_(converter),
+ out_buffer_(out_buffer),
+ out_buffer_pos_(0) {
+ out_buffer_[out_buffer_pos_] = '\0';
+ }
+
+ ~Decoder() {}
+
+ // Writes one disassembled instruction into 'buffer' (0-terminated).
+ // Returns the length of the disassembled machine instruction in bytes.
+ int InstructionDecode(byte* instruction);
+
+ private:
+ // Bottleneck functions to print into the out_buffer.
+ void PrintChar(const char ch);
+ void Print(const char* str);
+
+ // Printing of common values.
+ void PrintRegister(int reg);
+ void PrintCondition(Instr* instr);
+ void PrintShiftRm(Instr* instr);
+ void PrintShiftImm(Instr* instr);
+ void PrintPU(Instr* instr);
+ void PrintSoftwareInterrupt(SoftwareInterruptCodes swi);
+
+ // Handle formatting of instructions and their options.
+ int FormatRegister(Instr* instr, const char* option);
+ int FormatOption(Instr* instr, const char* option);
+ void Format(Instr* instr, const char* format);
+ void Unknown(Instr* instr);
+
+ // Each of these functions decodes one particular instruction type, a 3-bit
+ // field in the instruction encoding.
+ // Types 0 and 1 are combined as they are largely the same except for the way
+ // they interpret the shifter operand.
+ void DecodeType01(Instr* instr);
+ void DecodeType2(Instr* instr);
+ void DecodeType3(Instr* instr);
+ void DecodeType4(Instr* instr);
+ void DecodeType5(Instr* instr);
+ void DecodeType6(Instr* instr);
+ void DecodeType7(Instr* instr);
+ void DecodeUnconditional(Instr* instr);
+
+ const disasm::NameConverter& converter_;
+ v8::internal::Vector<char> out_buffer_;
+ int out_buffer_pos_;
+
+ DISALLOW_COPY_AND_ASSIGN(Decoder);
+};
+
+
+// Support for assertions in the Decoder formatting functions.
+#define STRING_STARTS_WITH(string, compare_string) \
+ (strncmp(string, compare_string, strlen(compare_string)) == 0)
+
+
+// Append the ch to the output buffer.
+void Decoder::PrintChar(const char ch) {
+ out_buffer_[out_buffer_pos_++] = ch;
+}
+
+
+// Append the str to the output buffer.
+void Decoder::Print(const char* str) {
+ char cur = *str++;
+ while (cur != '\0' && (out_buffer_pos_ < (out_buffer_.length() - 1))) {
+ PrintChar(cur);
+ cur = *str++;
+ }
+ out_buffer_[out_buffer_pos_] = 0;
+}
+
+
+// These condition names are defined in a way to match the native disassembler
+// formatting. See for example the command "objdump -d <binary file>".
+static const char* cond_names[max_condition] = {
+ "eq", "ne", "cs" , "cc" , "mi" , "pl" , "vs" , "vc" ,
+ "hi", "ls", "ge", "lt", "gt", "le", "", "invalid",
+};
+
+
+// Print the condition guarding the instruction.
+void Decoder::PrintCondition(Instr* instr) {
+ Print(cond_names[instr->ConditionField()]);
+}
+
+
+// Print the register name according to the active name converter.
+void Decoder::PrintRegister(int reg) {
+ Print(converter_.NameOfCPURegister(reg));
+}
+
+
+// These shift names are defined in a way to match the native disassembler
+// formatting. See for example the command "objdump -d <binary file>".
+static const char* shift_names[max_shift] = {
+ "lsl", "lsr", "asr", "ror"
+};
+
+
+// Print the register shift operands for the instruction. Generally used for
+// data processing instructions.
+void Decoder::PrintShiftRm(Instr* instr) {
+ Shift shift = instr->ShiftField();
+ int shift_amount = instr->ShiftAmountField();
+ int rm = instr->RmField();
+
+ PrintRegister(rm);
+
+ if ((instr->RegShiftField() == 0) && (shift == LSL) && (shift_amount == 0)) {
+ // Special case for using rm only.
+ return;
+ }
+ if (instr->RegShiftField() == 0) {
+ // by immediate
+ if ((shift == ROR) && (shift_amount == 0)) {
+ Print(", RRX");
+ return;
+ } else if (((shift == LSR) || (shift == ASR)) && (shift_amount == 0)) {
+ shift_amount = 32;
+ }
+ out_buffer_pos_ += v8i::OS::SNPrintF(out_buffer_ + out_buffer_pos_,
+ ", %s #%d",
+ shift_names[shift], shift_amount);
+ } else {
+ // by register
+ int rs = instr->RsField();
+ out_buffer_pos_ += v8i::OS::SNPrintF(out_buffer_ + out_buffer_pos_,
+ ", %s ", shift_names[shift]);
+ PrintRegister(rs);
+ }
+}
+
+
+// Print the immediate operand for the instruction. Generally used for data
+// processing instructions.
+void Decoder::PrintShiftImm(Instr* instr) {
+ int rotate = instr->RotateField() * 2;
+ int immed8 = instr->Immed8Field();
+ int imm = (immed8 >> rotate) | (immed8 << (32 - rotate));
+ out_buffer_pos_ += v8i::OS::SNPrintF(out_buffer_ + out_buffer_pos_,
+ "#%d", imm);
+}
+
+
+// Print PU formatting to reduce complexity of FormatOption.
+void Decoder::PrintPU(Instr* instr) {
+ switch (instr->PUField()) {
+ case 0: {
+ Print("da");
+ break;
+ }
+ case 1: {
+ Print("ia");
+ break;
+ }
+ case 2: {
+ Print("db");
+ break;
+ }
+ case 3: {
+ Print("ib");
+ break;
+ }
+ default: {
+ UNREACHABLE();
+ break;
+ }
+ }
+}
+
+
+// Print SoftwareInterrupt codes. Factoring this out reduces the complexity of
+// the FormatOption method.
+void Decoder::PrintSoftwareInterrupt(SoftwareInterruptCodes swi) {
+ switch (swi) {
+ case call_rt_redirected:
+ Print("call_rt_redirected");
+ return;
+ case break_point:
+ Print("break_point");
+ return;
+ default:
+ out_buffer_pos_ += v8i::OS::SNPrintF(out_buffer_ + out_buffer_pos_,
+ "%d",
+ swi);
+ return;
+ }
+}
+
+
+// Handle all register based formatting in this function to reduce the
+// complexity of FormatOption.
+int Decoder::FormatRegister(Instr* instr, const char* format) {
+ ASSERT(format[0] == 'r');
+ if (format[1] == 'n') { // 'rn: Rn register
+ int reg = instr->RnField();
+ PrintRegister(reg);
+ return 2;
+ } else if (format[1] == 'd') { // 'rd: Rd register
+ int reg = instr->RdField();
+ PrintRegister(reg);
+ return 2;
+ } else if (format[1] == 's') { // 'rs: Rs register
+ int reg = instr->RsField();
+ PrintRegister(reg);
+ return 2;
+ } else if (format[1] == 'm') { // 'rm: Rm register
+ int reg = instr->RmField();
+ PrintRegister(reg);
+ return 2;
+ } else if (format[1] == 'l') {
+ // 'rlist: register list for load and store multiple instructions
+ ASSERT(STRING_STARTS_WITH(format, "rlist"));
+ int rlist = instr->RlistField();
+ int reg = 0;
+ Print("{");
+ // Print register list in ascending order, by scanning the bit mask.
+ while (rlist != 0) {
+ if ((rlist & 1) != 0) {
+ PrintRegister(reg);
+ if ((rlist >> 1) != 0) {
+ Print(", ");
+ }
+ }
+ reg++;
+ rlist >>= 1;
+ }
+ Print("}");
+ return 5;
+ }
+ UNREACHABLE();
+ return -1;
+}
+
+
+// FormatOption takes a formatting string and interprets it based on
+// the current instructions. The format string points to the first
+// character of the option string (the option escape has already been
+// consumed by the caller.) FormatOption returns the number of
+// characters that were consumed from the formatting string.
+int Decoder::FormatOption(Instr* instr, const char* format) {
+ switch (format[0]) {
+ case 'a': { // 'a: accumulate multiplies
+ if (instr->Bit(21) == 0) {
+ Print("ul");
+ } else {
+ Print("la");
+ }
+ return 1;
+ }
+ case 'b': { // 'b: byte loads or stores
+ if (instr->HasB()) {
+ Print("b");
+ }
+ return 1;
+ }
+ case 'c': { // 'cond: conditional execution
+ ASSERT(STRING_STARTS_WITH(format, "cond"));
+ PrintCondition(instr);
+ return 4;
+ }
+ case 'h': { // 'h: halfword operation for extra loads and stores
+ if (instr->HasH()) {
+ Print("h");
+ } else {
+ Print("b");
+ }
+ return 1;
+ }
+ case 'l': { // 'l: branch and link
+ if (instr->HasLink()) {
+ Print("l");
+ }
+ return 1;
+ }
+ case 'm': {
+ if (format[1] == 'e') { // 'memop: load/store instructions
+ ASSERT(STRING_STARTS_WITH(format, "memop"));
+ if (instr->HasL()) {
+ Print("ldr");
+ } else {
+ Print("str");
+ }
+ return 5;
+ }
+ // 'msg: for simulator break instructions
+ ASSERT(STRING_STARTS_WITH(format, "msg"));
+ byte* str =
+ reinterpret_cast<byte*>(instr->InstructionBits() & 0x0fffffff);
+ out_buffer_pos_ += v8i::OS::SNPrintF(out_buffer_ + out_buffer_pos_,
+ "%s", converter_.NameInCode(str));
+ return 3;
+ }
+ case 'o': {
+ if (format[3] == '1') {
+ // 'off12: 12-bit offset for load and store instructions
+ ASSERT(STRING_STARTS_WITH(format, "off12"));
+ out_buffer_pos_ += v8i::OS::SNPrintF(out_buffer_ + out_buffer_pos_,
+ "%d", instr->Offset12Field());
+ return 5;
+ }
+ // 'off8: 8-bit offset for extra load and store instructions
+ ASSERT(STRING_STARTS_WITH(format, "off8"));
+ int offs8 = (instr->ImmedHField() << 4) | instr->ImmedLField();
+ out_buffer_pos_ += v8i::OS::SNPrintF(out_buffer_ + out_buffer_pos_,
+ "%d", offs8);
+ return 4;
+ }
+ case 'p': { // 'pu: P and U bits for load and store instructions
+ ASSERT(STRING_STARTS_WITH(format, "pu"));
+ PrintPU(instr);
+ return 2;
+ }
+ case 'r': {
+ return FormatRegister(instr, format);
+ }
+ case 's': {
+ if (format[1] == 'h') { // 'shift_op or 'shift_rm
+ if (format[6] == 'o') { // 'shift_op
+ ASSERT(STRING_STARTS_WITH(format, "shift_op"));
+ if (instr->TypeField() == 0) {
+ PrintShiftRm(instr);
+ } else {
+ ASSERT(instr->TypeField() == 1);
+ PrintShiftImm(instr);
+ }
+ return 8;
+ } else { // 'shift_rm
+ ASSERT(STRING_STARTS_WITH(format, "shift_rm"));
+ PrintShiftRm(instr);
+ return 8;
+ }
+ } else if (format[1] == 'w') { // 'swi
+ ASSERT(STRING_STARTS_WITH(format, "swi"));
+ PrintSoftwareInterrupt(instr->SwiField());
+ return 3;
+ } else if (format[1] == 'i') { // 'sign: signed extra loads and stores
+ ASSERT(STRING_STARTS_WITH(format, "sign"));
+ if (instr->HasSign()) {
+ Print("s");
+ }
+ return 4;
+ }
+ // 's: S field of data processing instructions
+ if (instr->HasS()) {
+ Print("s");
+ }
+ return 1;
+ }
+ case 't': { // 'target: target of branch instructions
+ ASSERT(STRING_STARTS_WITH(format, "target"));
+ int off = (instr->SImmed24Field() << 2) + 8;
+ out_buffer_pos_ += v8i::OS::SNPrintF(
+ out_buffer_ + out_buffer_pos_,
+ "%+d -> %s",
+ off,
+ converter_.NameOfAddress(reinterpret_cast<byte*>(instr) + off));
+ return 6;
+ }
+ case 'u': { // 'u: signed or unsigned multiplies
+ // The manual gets the meaning of bit 22 backwards in the multiply
+ // instruction overview on page A3.16.2. The instructions that
+ // exist in u and s variants are the following:
+ // smull A4.1.87
+ // umull A4.1.129
+ // umlal A4.1.128
+ // smlal A4.1.76
+ // For these 0 means u and 1 means s. As can be seen on their individual
+ // pages. The other 18 mul instructions have the bit set or unset in
+ // arbitrary ways that are unrelated to the signedness of the instruction.
+ // None of these 18 instructions exist in both a 'u' and an 's' variant.
+
+ if (instr->Bit(22) == 0) {
+ Print("u");
+ } else {
+ Print("s");
+ }
+ return 1;
+ }
+ case 'w': { // 'w: W field of load and store instructions
+ if (instr->HasW()) {
+ Print("!");
+ }
+ return 1;
+ }
+ default: {
+ UNREACHABLE();
+ break;
+ }
+ }
+ UNREACHABLE();
+ return -1;
+}
+
+
+// Format takes a formatting string for a whole instruction and prints it into
+// the output buffer. All escaped options are handed to FormatOption to be
+// parsed further.
+void Decoder::Format(Instr* instr, const char* format) {
+ char cur = *format++;
+ while ((cur != 0) && (out_buffer_pos_ < (out_buffer_.length() - 1))) {
+ if (cur == '\'') { // Single quote is used as the formatting escape.
+ format += FormatOption(instr, format);
+ } else {
+ out_buffer_[out_buffer_pos_++] = cur;
+ }
+ cur = *format++;
+ }
+ out_buffer_[out_buffer_pos_] = '\0';
+}
+
+
+// For currently unimplemented decodings the disassembler calls Unknown(instr)
+// which will just print "unknown" of the instruction bits.
+void Decoder::Unknown(Instr* instr) {
+ Format(instr, "unknown");
+}
+
+
+void Decoder::DecodeType01(Instr* instr) {
+ int type = instr->TypeField();
+ if ((type == 0) && instr->IsSpecialType0()) {
+ // multiply instruction or extra loads and stores
+ if (instr->Bits(7, 4) == 9) {
+ if (instr->Bit(24) == 0) {
+ // multiply instructions
+ if (instr->Bit(23) == 0) {
+ if (instr->Bit(21) == 0) {
+ // The MUL instruction description (A 4.1.33) refers to Rd as being
+ // the destination for the operation, but it confusingly uses the
+ // Rn field to encode it.
+ Format(instr, "mul'cond's 'rn, 'rm, 'rs");
+ } else {
+ // The MLA instruction description (A 4.1.28) refers to the order
+ // of registers as "Rd, Rm, Rs, Rn". But confusingly it uses the
+ // Rn field to encode the Rd register and the Rd field to encode
+ // the Rn register.
+ Format(instr, "mla'cond's 'rn, 'rm, 'rs, 'rd");
+ }
+ } else {
+ // The signed/long multiply instructions use the terms RdHi and RdLo
+ // when referring to the target registers. They are mapped to the Rn
+ // and Rd fields as follows:
+ // RdLo == Rd field
+ // RdHi == Rn field
+ // The order of registers is: <RdLo>, <RdHi>, <Rm>, <Rs>
+ Format(instr, "'um'al'cond's 'rd, 'rn, 'rm, 'rs");
+ }
+ } else {
+ Unknown(instr); // not used by V8
+ }
+ } else {
+ // extra load/store instructions
+ switch (instr->PUField()) {
+ case 0: {
+ if (instr->Bit(22) == 0) {
+ Format(instr, "'memop'cond'sign'h 'rd, ['rn], -'rm");
+ } else {
+ Format(instr, "'memop'cond'sign'h 'rd, ['rn], #-'off8");
+ }
+ break;
+ }
+ case 1: {
+ if (instr->Bit(22) == 0) {
+ Format(instr, "'memop'cond'sign'h 'rd, ['rn], +'rm");
+ } else {
+ Format(instr, "'memop'cond'sign'h 'rd, ['rn], #+'off8");
+ }
+ break;
+ }
+ case 2: {
+ if (instr->Bit(22) == 0) {
+ Format(instr, "'memop'cond'sign'h 'rd, ['rn, -'rm]'w");
+ } else {
+ Format(instr, "'memop'cond'sign'h 'rd, ['rn, #-'off8]'w");
+ }
+ break;
+ }
+ case 3: {
+ if (instr->Bit(22) == 0) {
+ Format(instr, "'memop'cond'sign'h 'rd, ['rn, +'rm]'w");
+ } else {
+ Format(instr, "'memop'cond'sign'h 'rd, ['rn, #+'off8]'w");
+ }
+ break;
+ }
+ default: {
+ // The PU field is a 2-bit field.
+ UNREACHABLE();
+ break;
+ }
+ }
+ return;
+ }
+ } else {
+ switch (instr->OpcodeField()) {
+ case AND: {
+ Format(instr, "and'cond's 'rd, 'rn, 'shift_op");
+ break;
+ }
+ case EOR: {
+ Format(instr, "eor'cond's 'rd, 'rn, 'shift_op");
+ break;
+ }
+ case SUB: {
+ Format(instr, "sub'cond's 'rd, 'rn, 'shift_op");
+ break;
+ }
+ case RSB: {
+ Format(instr, "rsb'cond's 'rd, 'rn, 'shift_op");
+ break;
+ }
+ case ADD: {
+ Format(instr, "add'cond's 'rd, 'rn, 'shift_op");
+ break;
+ }
+ case ADC: {
+ Format(instr, "adc'cond's 'rd, 'rn, 'shift_op");
+ break;
+ }
+ case SBC: {
+ Format(instr, "sbc'cond's 'rd, 'rn, 'shift_op");
+ break;
+ }
+ case RSC: {
+ Format(instr, "rsc'cond's 'rd, 'rn, 'shift_op");
+ break;
+ }
+ case TST: {
+ if (instr->HasS()) {
+ Format(instr, "tst'cond 'rn, 'shift_op");
+ } else {
+ Unknown(instr); // not used by V8
+ }
+ break;
+ }
+ case TEQ: {
+ if (instr->HasS()) {
+ Format(instr, "teq'cond 'rn, 'shift_op");
+ } else {
+ switch (instr->Bits(7, 4)) {
+ case BX:
+ Format(instr, "bx'cond 'rm");
+ break;
+ case BLX:
+ Format(instr, "blx'cond 'rm");
+ break;
+ default:
+ Unknown(instr); // not used by V8
+ break;
+ }
+ }
+ break;
+ }
+ case CMP: {
+ if (instr->HasS()) {
+ Format(instr, "cmp'cond 'rn, 'shift_op");
+ } else {
+ Unknown(instr); // not used by V8
+ }
+ break;
+ }
+ case CMN: {
+ if (instr->HasS()) {
+ Format(instr, "cmn'cond 'rn, 'shift_op");
+ } else {
+ switch (instr->Bits(7, 4)) {
+ case CLZ:
+ Format(instr, "clz'cond 'rd, 'rm");
+ break;
+ default:
+ Unknown(instr); // not used by V8
+ break;
+ }
+ }
+ break;
+ }
+ case ORR: {
+ Format(instr, "orr'cond's 'rd, 'rn, 'shift_op");
+ break;
+ }
+ case MOV: {
+ Format(instr, "mov'cond's 'rd, 'shift_op");
+ break;
+ }
+ case BIC: {
+ Format(instr, "bic'cond's 'rd, 'rn, 'shift_op");
+ break;
+ }
+ case MVN: {
+ Format(instr, "mvn'cond's 'rd, 'shift_op");
+ break;
+ }
+ default: {
+ // The Opcode field is a 4-bit field.
+ UNREACHABLE();
+ break;
+ }
+ }
+ }
+}
+
+
+void Decoder::DecodeType2(Instr* instr) {
+ switch (instr->PUField()) {
+ case 0: {
+ if (instr->HasW()) {
+ Unknown(instr); // not used in V8
+ }
+ Format(instr, "'memop'cond'b 'rd, ['rn], #-'off12");
+ break;
+ }
+ case 1: {
+ if (instr->HasW()) {
+ Unknown(instr); // not used in V8
+ }
+ Format(instr, "'memop'cond'b 'rd, ['rn], #+'off12");
+ break;
+ }
+ case 2: {
+ Format(instr, "'memop'cond'b 'rd, ['rn, #-'off12]'w");
+ break;
+ }
+ case 3: {
+ Format(instr, "'memop'cond'b 'rd, ['rn, #+'off12]'w");
+ break;
+ }
+ default: {
+ // The PU field is a 2-bit field.
+ UNREACHABLE();
+ break;
+ }
+ }
+}
+
+
+void Decoder::DecodeType3(Instr* instr) {
+ switch (instr->PUField()) {
+ case 0: {
+ ASSERT(!instr->HasW());
+ Format(instr, "'memop'cond'b 'rd, ['rn], -'shift_rm");
+ break;
+ }
+ case 1: {
+ ASSERT(!instr->HasW());
+ Format(instr, "'memop'cond'b 'rd, ['rn], +'shift_rm");
+ break;
+ }
+ case 2: {
+ Format(instr, "'memop'cond'b 'rd, ['rn, -'shift_rm]'w");
+ break;
+ }
+ case 3: {
+ Format(instr, "'memop'cond'b 'rd, ['rn, +'shift_rm]'w");
+ break;
+ }
+ default: {
+ // The PU field is a 2-bit field.
+ UNREACHABLE();
+ break;
+ }
+ }
+}
+
+
+void Decoder::DecodeType4(Instr* instr) {
+ ASSERT(instr->Bit(22) == 0); // Privileged mode currently not supported.
+ if (instr->HasL()) {
+ Format(instr, "ldm'cond'pu 'rn'w, 'rlist");
+ } else {
+ Format(instr, "stm'cond'pu 'rn'w, 'rlist");
+ }
+}
+
+
+void Decoder::DecodeType5(Instr* instr) {
+ Format(instr, "b'l'cond 'target");
+}
+
+
+void Decoder::DecodeType6(Instr* instr) {
+ // Coprocessor instructions currently not supported.
+ Unknown(instr);
+}
+
+
+void Decoder::DecodeType7(Instr* instr) {
+ if (instr->Bit(24) == 1) {
+ Format(instr, "swi'cond 'swi");
+ } else {
+ // Coprocessor instructions currently not supported.
+ Unknown(instr);
+ }
+}
+
+
+void Decoder::DecodeUnconditional(Instr* instr) {
+ if (instr->Bits(7, 4) == 0xB && instr->Bits(27, 25) == 0 && instr->HasL()) {
+ Format(instr, "'memop'h'pu 'rd, ");
+ bool immediate = instr->HasB();
+ switch (instr->PUField()) {
+ case 0: {
+ // Post index, negative.
+ if (instr->HasW()) {
+ Unknown(instr);
+ break;
+ }
+ if (immediate) {
+ Format(instr, "['rn], #-'imm12");
+ } else {
+ Format(instr, "['rn], -'rm");
+ }
+ break;
+ }
+ case 1: {
+ // Post index, positive.
+ if (instr->HasW()) {
+ Unknown(instr);
+ break;
+ }
+ if (immediate) {
+ Format(instr, "['rn], #+'imm12");
+ } else {
+ Format(instr, "['rn], +'rm");
+ }
+ break;
+ }
+ case 2: {
+ // Pre index or offset, negative.
+ if (immediate) {
+ Format(instr, "['rn, #-'imm12]'w");
+ } else {
+ Format(instr, "['rn, -'rm]'w");
+ }
+ break;
+ }
+ case 3: {
+ // Pre index or offset, positive.
+ if (immediate) {
+ Format(instr, "['rn, #+'imm12]'w");
+ } else {
+ Format(instr, "['rn, +'rm]'w");
+ }
+ break;
+ }
+ default: {
+ // The PU field is a 2-bit field.
+ UNREACHABLE();
+ break;
+ }
+ }
+ return;
+ }
+ Format(instr, "break 'msg");
+}
+
+
+// Disassemble the instruction at *instr_ptr into the output buffer.
+int Decoder::InstructionDecode(byte* instr_ptr) {
+ Instr* instr = Instr::At(instr_ptr);
+ // Print raw instruction bytes.
+ out_buffer_pos_ += v8i::OS::SNPrintF(out_buffer_ + out_buffer_pos_,
+ "%08x ",
+ instr->InstructionBits());
+ if (instr->ConditionField() == special_condition) {
+ DecodeUnconditional(instr);
+ return Instr::kInstrSize;
+ }
+ switch (instr->TypeField()) {
+ case 0:
+ case 1: {
+ DecodeType01(instr);
+ break;
+ }
+ case 2: {
+ DecodeType2(instr);
+ break;
+ }
+ case 3: {
+ DecodeType3(instr);
+ break;
+ }
+ case 4: {
+ DecodeType4(instr);
+ break;
+ }
+ case 5: {
+ DecodeType5(instr);
+ break;
+ }
+ case 6: {
+ DecodeType6(instr);
+ break;
+ }
+ case 7: {
+ DecodeType7(instr);
+ break;
+ }
+ default: {
+ // The type field is 3-bits in the ARM encoding.
+ UNREACHABLE();
+ break;
+ }
+ }
+ return Instr::kInstrSize;
+}
+
+
+} } // namespace assembler::arm
+
+
+
+//------------------------------------------------------------------------------
+
+namespace disasm {
+
+namespace v8i = v8::internal;
+
+
+const char* NameConverter::NameOfAddress(byte* addr) const {
+ static v8::internal::EmbeddedVector<char, 32> tmp_buffer;
+ v8::internal::OS::SNPrintF(tmp_buffer, "%p", addr);
+ return tmp_buffer.start();
+}
+
+
+const char* NameConverter::NameOfConstant(byte* addr) const {
+ return NameOfAddress(addr);
+}
+
+
+const char* NameConverter::NameOfCPURegister(int reg) const {
+ return assembler::arm::Registers::Name(reg);
+}
+
+
+const char* NameConverter::NameOfByteCPURegister(int reg) const {
+ UNREACHABLE(); // ARM does not have the concept of a byte register
+ return "nobytereg";
+}
+
+
+const char* NameConverter::NameOfXMMRegister(int reg) const {
+ UNREACHABLE(); // ARM does not have any XMM registers
+ return "noxmmreg";
+}
+
+
+const char* NameConverter::NameInCode(byte* addr) const {
+ // The default name converter is called for unknown code. So we will not try
+ // to access any memory.
+ return "";
+}
+
+
+//------------------------------------------------------------------------------
+
+Disassembler::Disassembler(const NameConverter& converter)
+ : converter_(converter) {}
+
+
+Disassembler::~Disassembler() {}
+
+
+int Disassembler::InstructionDecode(v8::internal::Vector<char> buffer,
+ byte* instruction) {
+ assembler::arm::Decoder d(converter_, buffer);
+ return d.InstructionDecode(instruction);
+}
+
+
+int Disassembler::ConstantPoolSizeAt(byte* instruction) {
+ int instruction_bits = *(reinterpret_cast<int*>(instruction));
+ if ((instruction_bits & 0xfff00000) == 0x03000000) {
+ return instruction_bits & 0x0000ffff;
+ } else {
+ return -1;
+ }
+}
+
+
+void Disassembler::Disassemble(FILE* f, byte* begin, byte* end) {
+ NameConverter converter;
+ Disassembler d(converter);
+ for (byte* pc = begin; pc < end;) {
+ v8::internal::EmbeddedVector<char, 128> buffer;
+ buffer[0] = '\0';
+ byte* prev_pc = pc;
+ pc += d.InstructionDecode(buffer, pc);
+ fprintf(f, "%p %08x %s\n",
+ prev_pc, *reinterpret_cast<int32_t*>(prev_pc), buffer.start());
+ }
+}
+
+
+} // namespace disasm