| /* -*- mode: C; c-basic-offset: 3; -*- */ |
| |
| /*--------------------------------------------------------------------*/ |
| /*--- Read DWARF3/4 ".debug_info" sections (DIE trees). ---*/ |
| /*--- readdwarf3.c ---*/ |
| /*--------------------------------------------------------------------*/ |
| |
| /* |
| This file is part of Valgrind, a dynamic binary instrumentation |
| framework. |
| |
| Copyright (C) 2008-2013 OpenWorks LLP |
| info@open-works.co.uk |
| |
| This program is free software; you can redistribute it and/or |
| modify it under the terms of the GNU General Public License as |
| published by the Free Software Foundation; either version 2 of the |
| License, or (at your option) any later version. |
| |
| This program is distributed in the hope that it will be useful, but |
| WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with this program; if not, write to the Free Software |
| Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA |
| 02111-1307, USA. |
| |
| The GNU General Public License is contained in the file COPYING. |
| |
| Neither the names of the U.S. Department of Energy nor the |
| University of California nor the names of its contributors may be |
| used to endorse or promote products derived from this software |
| without prior written permission. |
| */ |
| |
| #if defined(VGO_linux) || defined(VGO_darwin) |
| |
| /* REFERENCE (without which this code will not make much sense): |
| |
| DWARF Debugging Information Format, Version 3, |
| dated 20 December 2005 (the "D3 spec"). |
| |
| Available at http://www.dwarfstd.org/Dwarf3.pdf. There's also a |
| .doc (MS Word) version, but for some reason the section numbers |
| between the Word and PDF versions differ by 1 in the first digit. |
| All section references in this code are to the PDF version. |
| |
| CURRENT HACKS: |
| |
| DW_TAG_{const,volatile}_type no DW_AT_type is allowed; it is |
| assumed to mean "const void" or "volatile void" respectively. |
| GDB appears to interpret them like this, anyway. |
| |
| In many cases it is important to know the svma of a CU (the "base |
| address of the CU", as the D3 spec calls it). There are some |
| situations in which the spec implies this value is unknown, but the |
| Dwarf3 produced by gcc-4.1 seems to assume is not unknown but |
| merely zero when not explicitly stated. So we too have to make |
| that assumption. |
| |
| POTENTIAL BUG? Spotted 6 Sept 08. Why doesn't |
| unitary_range_list() bias the resulting range list in the same way |
| that its more general cousin, get_range_list(), does? I don't |
| know. |
| |
| TODO, 2008 Feb 17: |
| |
| get rid of cu_svma_known and document the assumed-zero svma hack. |
| |
| ML_(sizeOfType): differentiate between zero sized types and types |
| for which the size is unknown. Is this important? I don't know. |
| |
| DW_TAG_array_types: deal with explicit sizes (currently we compute |
| the size from the bounds and the element size, although that's |
| fragile, if the bounds incompletely specified, or completely |
| absent) |
| |
| Document reason for difference (by 1) of stack preening depth in |
| parse_var_DIE vs parse_type_DIE. |
| |
| Don't hand to ML_(addVars), vars whose locations are entirely in |
| registers (DW_OP_reg*). This is merely a space-saving |
| optimisation, as ML_(evaluate_Dwarf3_Expr) should handle these |
| expressions correctly, by failing to evaluate them and hence |
| effectively ignoring the variable with which they are associated. |
| |
| Deal with DW_TAG_array_types which have element size != stride |
| |
| In some cases, the info for a variable is split between two |
| different DIEs (generally a declarer and a definer). We punt on |
| these. Could do better here. |
| |
| The 'data_bias' argument passed to the expression evaluator |
| (ML_(evaluate_Dwarf3_Expr)) should really be changed to a |
| MaybeUWord, to make it clear when we do vs don't know what it is |
| for the evaluation of an expression. At the moment zero is passed |
| for this parameter in the don't know case. That's a bit fragile |
| and obscure; using a MaybeUWord would be clearer. |
| |
| POTENTIAL PERFORMANCE IMPROVEMENTS: |
| |
| Currently, duplicate removal and all other queries for the type |
| entities array is done using cuOffset-based pointing, which |
| involves a binary search (VG_(lookupXA)) for each access. This is |
| wildly inefficient, although simple. It would be better to |
| translate all the cuOffset-based references (iow, all the "R" and |
| "Rs" fields in the TyEnts in 'tyents') to direct index numbers in |
| 'tyents' right at the start of dedup_types(), and use direct |
| indexing (VG_(indexXA)) wherever possible after that. |
| |
| cmp__XArrays_of_AddrRange is also a performance bottleneck. Move |
| VG_(indexXA) into pub_tool_xarray.h so it can be inlined at all use |
| points, and possibly also make an _UNCHECKED version which skips |
| the range checks in performance-critical situations such as this. |
| |
| Handle interaction between read_DIE and parse_{var,type}_DIE |
| better. Currently read_DIE reads the entire DIE just to find where |
| the end is (and for debug printing), so that it can later reliably |
| move the cursor to the end regardless of what parse_{var,type}_DIE |
| do. This means many DIEs (most, even?) are read twice. It would |
| be smarter to make parse_{var,type}_DIE return a Bool indicating |
| whether or not they advanced the DIE cursor, and only if they |
| didn't should read_DIE itself read through the DIE. |
| |
| ML_(addVar) and add_var_to_arange: quite a lot of DiAddrRanges have |
| zero variables in their .vars XArray. Rather than have an XArray |
| with zero elements (which uses 2 malloc'd blocks), allow the .vars |
| pointer to be NULL in this case. |
| |
| More generally, reduce the amount of memory allocated and freed |
| while reading Dwarf3 type/variable information. Even modest (20MB) |
| objects cause this module to allocate and free hundreds of |
| thousands of small blocks, and ML_(arena_malloc) and its various |
| groupies always show up at the top of performance profiles. */ |
| |
| #include "pub_core_basics.h" |
| #include "pub_core_debuginfo.h" |
| #include "pub_core_libcbase.h" |
| #include "pub_core_libcassert.h" |
| #include "pub_core_libcprint.h" |
| #include "pub_core_libcsetjmp.h" // setjmp facilities |
| #include "pub_core_hashtable.h" |
| #include "pub_core_options.h" |
| #include "pub_core_tooliface.h" /* VG_(needs) */ |
| #include "pub_core_xarray.h" |
| #include "pub_core_wordfm.h" |
| #include "priv_misc.h" /* dinfo_zalloc/free */ |
| #include "priv_image.h" |
| #include "priv_tytypes.h" |
| #include "priv_d3basics.h" |
| #include "priv_storage.h" |
| #include "priv_readdwarf3.h" /* self */ |
| |
| |
| /*------------------------------------------------------------*/ |
| /*--- ---*/ |
| /*--- Basic machinery for parsing DIEs. ---*/ |
| /*--- ---*/ |
| /*------------------------------------------------------------*/ |
| |
| #define TRACE_D3(format, args...) \ |
| if (td3) { VG_(printf)(format, ## args); } |
| |
| #define D3_INVALID_CUOFF ((UWord)(-1UL)) |
| #define D3_FAKEVOID_CUOFF ((UWord)(-2UL)) |
| |
| typedef |
| struct { |
| DiSlice sli; // to which this cursor applies |
| DiOffT sli_next; // offset in underlying DiImage; must be >= sli.ioff |
| void (*barf)( const HChar* ) __attribute__((noreturn)); |
| const HChar* barfstr; |
| } |
| Cursor; |
| |
| static inline Bool is_sane_Cursor ( Cursor* c ) { |
| if (!c) return False; |
| if (!c->barf) return False; |
| if (!c->barfstr) return False; |
| if (!ML_(sli_is_valid)(c->sli)) return False; |
| if (c->sli.ioff == DiOffT_INVALID) return False; |
| if (c->sli_next < c->sli.ioff) return False; |
| return True; |
| } |
| |
| // Initialise a cursor from a DiSlice (ELF section, really) so as to |
| // start reading at offset |sli_initial_offset| from the start of the |
| // slice. |
| static void init_Cursor ( /*OUT*/Cursor* c, |
| DiSlice sli, |
| ULong sli_initial_offset, |
| __attribute__((noreturn)) void (*barf)(const HChar*), |
| const HChar* barfstr ) |
| { |
| vg_assert(c); |
| VG_(bzero_inline)(c, sizeof(*c)); |
| c->sli = sli; |
| c->sli_next = c->sli.ioff + sli_initial_offset; |
| c->barf = barf; |
| c->barfstr = barfstr; |
| vg_assert(is_sane_Cursor(c)); |
| } |
| |
| static Bool is_at_end_Cursor ( Cursor* c ) { |
| vg_assert(is_sane_Cursor(c)); |
| return c->sli_next >= c->sli.ioff + c->sli.szB; |
| } |
| |
| static inline ULong get_position_of_Cursor ( Cursor* c ) { |
| vg_assert(is_sane_Cursor(c)); |
| return c->sli_next - c->sli.ioff; |
| } |
| static inline void set_position_of_Cursor ( Cursor* c, ULong pos ) { |
| c->sli_next = c->sli.ioff + pos; |
| vg_assert(is_sane_Cursor(c)); |
| } |
| |
| static /*signed*/Long get_remaining_length_Cursor ( Cursor* c ) { |
| vg_assert(is_sane_Cursor(c)); |
| return c->sli.ioff + c->sli.szB - c->sli_next; |
| } |
| |
| //static void* get_address_of_Cursor ( Cursor* c ) { |
| // vg_assert(is_sane_Cursor(c)); |
| // return &c->region_start_img[ c->region_next ]; |
| //} |
| |
| static DiCursor get_DiCursor_from_Cursor ( Cursor* c ) { |
| return mk_DiCursor(c->sli.img, c->sli_next); |
| } |
| |
| /* FIXME: document assumptions on endianness for |
| get_UShort/UInt/ULong. */ |
| static inline UChar get_UChar ( Cursor* c ) { |
| UChar r; |
| vg_assert(is_sane_Cursor(c)); |
| if (c->sli_next + sizeof(UChar) > c->sli.ioff + c->sli.szB) { |
| c->barf(c->barfstr); |
| /*NOTREACHED*/ |
| vg_assert(0); |
| } |
| r = ML_(img_get_UChar)(c->sli.img, c->sli_next); |
| c->sli_next += sizeof(UChar); |
| return r; |
| } |
| static UShort get_UShort ( Cursor* c ) { |
| UShort r; |
| vg_assert(is_sane_Cursor(c)); |
| if (c->sli_next + sizeof(UShort) > c->sli.ioff + c->sli.szB) { |
| c->barf(c->barfstr); |
| /*NOTREACHED*/ |
| vg_assert(0); |
| } |
| r = ML_(img_get_UShort)(c->sli.img, c->sli_next); |
| c->sli_next += sizeof(UShort); |
| return r; |
| } |
| static UInt get_UInt ( Cursor* c ) { |
| UInt r; |
| vg_assert(is_sane_Cursor(c)); |
| if (c->sli_next + sizeof(UInt) > c->sli.ioff + c->sli.szB) { |
| c->barf(c->barfstr); |
| /*NOTREACHED*/ |
| vg_assert(0); |
| } |
| r = ML_(img_get_UInt)(c->sli.img, c->sli_next); |
| c->sli_next += sizeof(UInt); |
| return r; |
| } |
| static ULong get_ULong ( Cursor* c ) { |
| ULong r; |
| vg_assert(is_sane_Cursor(c)); |
| if (c->sli_next + sizeof(ULong) > c->sli.ioff + c->sli.szB) { |
| c->barf(c->barfstr); |
| /*NOTREACHED*/ |
| vg_assert(0); |
| } |
| r = ML_(img_get_ULong)(c->sli.img, c->sli_next); |
| c->sli_next += sizeof(ULong); |
| return r; |
| } |
| static ULong get_ULEB128 ( Cursor* c ) { |
| ULong result; |
| Int shift; |
| UChar byte; |
| /* unroll first iteration */ |
| byte = get_UChar( c ); |
| result = (ULong)(byte & 0x7f); |
| if (LIKELY(!(byte & 0x80))) return result; |
| shift = 7; |
| /* end unroll first iteration */ |
| do { |
| byte = get_UChar( c ); |
| result |= ((ULong)(byte & 0x7f)) << shift; |
| shift += 7; |
| } while (byte & 0x80); |
| return result; |
| } |
| static Long get_SLEB128 ( Cursor* c ) { |
| ULong result = 0; |
| Int shift = 0; |
| UChar byte; |
| do { |
| byte = get_UChar(c); |
| result |= ((ULong)(byte & 0x7f)) << shift; |
| shift += 7; |
| } while (byte & 0x80); |
| if (shift < 64 && (byte & 0x40)) |
| result |= -(1ULL << shift); |
| return result; |
| } |
| |
| /* Assume 'c' points to the start of a string. Return a DiCursor of |
| whatever it points at, and advance it past the terminating zero. |
| This makes it safe for the caller to then copy the string with |
| ML_(addStr), since (w.r.t. image overruns) the process of advancing |
| past the terminating zero will already have "vetted" the string. */ |
| static DiCursor get_AsciiZ ( Cursor* c ) { |
| UChar uc; |
| DiCursor res = get_DiCursor_from_Cursor(c); |
| do { uc = get_UChar(c); } while (uc != 0); |
| return res; |
| } |
| |
| static ULong peek_ULEB128 ( Cursor* c ) { |
| DiOffT here = c->sli_next; |
| ULong r = get_ULEB128( c ); |
| c->sli_next = here; |
| return r; |
| } |
| static UChar peek_UChar ( Cursor* c ) { |
| DiOffT here = c->sli_next; |
| UChar r = get_UChar( c ); |
| c->sli_next = here; |
| return r; |
| } |
| |
| static ULong get_Dwarfish_UWord ( Cursor* c, Bool is_dw64 ) { |
| return is_dw64 ? get_ULong(c) : (ULong) get_UInt(c); |
| } |
| |
| static UWord get_UWord ( Cursor* c ) { |
| vg_assert(sizeof(UWord) == sizeof(void*)); |
| if (sizeof(UWord) == 4) return get_UInt(c); |
| if (sizeof(UWord) == 8) return get_ULong(c); |
| vg_assert(0); |
| } |
| |
| /* Read a DWARF3 'Initial Length' field */ |
| static ULong get_Initial_Length ( /*OUT*/Bool* is64, |
| Cursor* c, |
| const HChar* barfMsg ) |
| { |
| ULong w64; |
| UInt w32; |
| *is64 = False; |
| w32 = get_UInt( c ); |
| if (w32 >= 0xFFFFFFF0 && w32 < 0xFFFFFFFF) { |
| c->barf( barfMsg ); |
| } |
| else if (w32 == 0xFFFFFFFF) { |
| *is64 = True; |
| w64 = get_ULong( c ); |
| } else { |
| *is64 = False; |
| w64 = (ULong)w32; |
| } |
| return w64; |
| } |
| |
| |
| /*------------------------------------------------------------*/ |
| /*--- ---*/ |
| /*--- "CUConst" structure ---*/ |
| /*--- ---*/ |
| /*------------------------------------------------------------*/ |
| |
| #define N_ABBV_CACHE 32 |
| |
| /* Holds information that is constant through the parsing of a |
| Compilation Unit. This is basically plumbed through to |
| everywhere. */ |
| typedef |
| struct { |
| /* Call here if anything goes wrong */ |
| void (*barf)( const HChar* ) __attribute__((noreturn)); |
| /* Is this 64-bit DWARF ? */ |
| Bool is_dw64; |
| /* Which DWARF version ? (2, 3 or 4) */ |
| UShort version; |
| /* Length of this Compilation Unit, as stated in the |
| .unit_length :: InitialLength field of the CU Header. |
| However, this size (as specified by the D3 spec) does not |
| include the size of the .unit_length field itself, which is |
| either 4 or 12 bytes (32-bit or 64-bit Dwarf3). That value |
| can be obtained through the expression ".is_dw64 ? 12 : 4". */ |
| ULong unit_length; |
| /* Offset of start of this unit in .debug_info */ |
| UWord cu_start_offset; |
| /* SVMA for this CU. In the D3 spec, is known as the "base |
| address of the compilation unit (last para sec 3.1.1). |
| Needed for (amongst things) interpretation of location-list |
| values. */ |
| Addr cu_svma; |
| Bool cu_svma_known; |
| |
| /* The debug_abbreviations table to be used for this Unit */ |
| //UChar* debug_abbv; |
| /* Upper bound on size thereof (an overestimate, in general) */ |
| //UWord debug_abbv_maxszB; |
| /* A bounded area of the image, to be used as the |
| debug_abbreviations table tobe used for this Unit. */ |
| DiSlice debug_abbv; |
| |
| /* Image information for various sections. */ |
| DiSlice escn_debug_str; |
| DiSlice escn_debug_ranges; |
| DiSlice escn_debug_loc; |
| DiSlice escn_debug_line; |
| DiSlice escn_debug_info; |
| DiSlice escn_debug_types; |
| DiSlice escn_debug_info_alt; |
| DiSlice escn_debug_str_alt; |
| /* How much to add to .debug_types resp. alternate .debug_info offsets |
| in cook_die*. */ |
| UWord types_cuOff_bias; |
| UWord alt_cuOff_bias; |
| /* --- Needed so we can add stuff to the string table. --- */ |
| struct _DebugInfo* di; |
| /* --- a cache for set_abbv_Cursor --- */ |
| /* abbv_code == (ULong)-1 for an unused entry. */ |
| struct { ULong abbv_code; UWord posn; } saC_cache[N_ABBV_CACHE]; |
| UWord saC_cache_queries; |
| UWord saC_cache_misses; |
| |
| /* True if this came from .debug_types; otherwise it came from |
| .debug_info. */ |
| Bool is_type_unit; |
| /* For a unit coming from .debug_types, these hold the TU's type |
| signature and the uncooked DIE offset of the TU's signatured |
| type. For a unit coming from .debug_info, these are unused. */ |
| ULong type_signature; |
| ULong type_offset; |
| |
| /* Signatured type hash; computed once and then shared by all |
| CUs. */ |
| VgHashTable signature_types; |
| |
| /* True if this came from alternate .debug_info; otherwise |
| it came from normal .debug_info or .debug_types. */ |
| Bool is_alt_info; |
| } |
| CUConst; |
| |
| |
| /* Return the cooked value of DIE depending on whether CC represents a |
| .debug_types unit. To cook a DIE, we pretend that the .debug_info, |
| .debug_types and optional alternate .debug_info sections form |
| a contiguous whole, so that DIEs coming from .debug_types are numbered |
| starting at the end of .debug_info and DIEs coming from alternate |
| .debug_info are numbered starting at the end of .debug_types. */ |
| static UWord cook_die( CUConst* cc, UWord die ) |
| { |
| if (cc->is_type_unit) |
| die += cc->types_cuOff_bias; |
| else if (cc->is_alt_info) |
| die += cc->alt_cuOff_bias; |
| return die; |
| } |
| |
| /* Like cook_die, but understand that DIEs coming from a |
| DW_FORM_ref_sig8 reference are already cooked. Also, handle |
| DW_FORM_GNU_ref_alt from within primary .debug_info or .debug_types |
| as reference to alternate .debug_info. */ |
| static UWord cook_die_using_form( CUConst *cc, UWord die, DW_FORM form) |
| { |
| if (form == DW_FORM_ref_sig8) |
| return die; |
| if (form == DW_FORM_GNU_ref_alt) |
| return die + cc->alt_cuOff_bias; |
| return cook_die( cc, die ); |
| } |
| |
| /* Return the uncooked offset of DIE and set *TYPE_FLAG to true if the DIE |
| came from the .debug_types section and *ALT_FLAG to true if the DIE |
| came from alternate .debug_info section. */ |
| static UWord uncook_die( CUConst *cc, UWord die, /*OUT*/Bool *type_flag, |
| Bool *alt_flag ) |
| { |
| *alt_flag = False; |
| *type_flag = False; |
| /* The use of escn_debug_{info,types}.szB seems safe to me even if |
| escn_debug_{info,types} are DiSlice_INVALID (meaning the |
| sections were not found), because DiSlice_INVALID.szB is always |
| zero. That said, it seems unlikely we'd ever get here if |
| .debug_info or .debug_types were missing. */ |
| if (die >= cc->escn_debug_info.szB) { |
| if (die >= cc->escn_debug_info.szB + cc->escn_debug_types.szB) { |
| *alt_flag = True; |
| die -= cc->escn_debug_info.szB + cc->escn_debug_types.szB; |
| } else { |
| *type_flag = True; |
| die -= cc->escn_debug_info.szB; |
| } |
| } |
| return die; |
| } |
| |
| /*------------------------------------------------------------*/ |
| /*--- ---*/ |
| /*--- Helper functions for Guarded Expressions ---*/ |
| /*--- ---*/ |
| /*------------------------------------------------------------*/ |
| |
| /* Parse the location list starting at img-offset 'debug_loc_offset' |
| in .debug_loc. Results are biased with 'svma_of_referencing_CU' |
| and so I believe are correct SVMAs for the object as a whole. This |
| function allocates the UChar*, and the caller must deallocate it. |
| The resulting block is in so-called Guarded-Expression format. |
| |
| Guarded-Expression format is similar but not identical to the DWARF3 |
| location-list format. The format of each returned block is: |
| |
| UChar biasMe; |
| UChar isEnd; |
| followed by zero or more of |
| |
| (Addr aMin; Addr aMax; UShort nbytes; ..bytes..; UChar isEnd) |
| |
| '..bytes..' is an standard DWARF3 location expression which is |
| valid when aMin <= pc <= aMax (possibly after suitable biasing). |
| |
| The number of bytes in '..bytes..' is nbytes. |
| |
| The end of the sequence is marked by an isEnd == 1 value. All |
| previous isEnd values must be zero. |
| |
| biasMe is 1 if the aMin/aMax fields need this DebugInfo's |
| text_bias added before use, and 0 if the GX is this is not |
| necessary (is ready to go). |
| |
| Hence the block can be quickly parsed and is self-describing. Note |
| that aMax is 1 less than the corresponding value in a DWARF3 |
| location list. Zero length ranges, with aMax == aMin-1, are not |
| allowed. |
| */ |
| /* 2008-sept-12: moved ML_(pp_GX) from here to d3basics.c, where |
| it more logically belongs. */ |
| |
| |
| /* Apply a text bias to a GX. */ |
| static void bias_GX ( /*MOD*/GExpr* gx, struct _DebugInfo* di ) |
| { |
| UShort nbytes; |
| UChar* p = &gx->payload[0]; |
| UChar* pA; |
| UChar uc; |
| uc = *p++; /*biasMe*/ |
| if (uc == 0) |
| return; |
| vg_assert(uc == 1); |
| p[-1] = 0; /* mark it as done */ |
| while (True) { |
| uc = *p++; |
| if (uc == 1) |
| break; /*isEnd*/ |
| vg_assert(uc == 0); |
| /* t-bias aMin */ |
| pA = (UChar*)p; |
| ML_(write_Addr)(pA, ML_(read_Addr)(pA) + di->text_debug_bias); |
| p += sizeof(Addr); |
| /* t-bias aMax */ |
| pA = (UChar*)p; |
| ML_(write_Addr)(pA, ML_(read_Addr)(pA) + di->text_debug_bias); |
| p += sizeof(Addr); |
| /* nbytes, and actual expression */ |
| nbytes = ML_(read_UShort)(p); p += sizeof(UShort); |
| p += nbytes; |
| } |
| } |
| |
| __attribute__((noinline)) |
| static GExpr* make_singleton_GX ( DiCursor block, ULong nbytes ) |
| { |
| SizeT bytesReqd; |
| GExpr* gx; |
| UChar *p, *pstart; |
| |
| vg_assert(sizeof(UWord) == sizeof(Addr)); |
| vg_assert(nbytes <= 0xFFFF); /* else we overflow the nbytes field */ |
| bytesReqd |
| = sizeof(UChar) /*biasMe*/ + sizeof(UChar) /*!isEnd*/ |
| + sizeof(UWord) /*aMin*/ + sizeof(UWord) /*aMax*/ |
| + sizeof(UShort) /*nbytes*/ + (SizeT)nbytes |
| + sizeof(UChar); /*isEnd*/ |
| |
| gx = ML_(dinfo_zalloc)( "di.readdwarf3.msGX.1", |
| sizeof(GExpr) + bytesReqd ); |
| vg_assert(gx); |
| |
| p = pstart = &gx->payload[0]; |
| |
| p = ML_(write_UChar)(p, 0); /*biasMe*/ |
| p = ML_(write_UChar)(p, 0); /*!isEnd*/ |
| p = ML_(write_Addr)(p, 0); /*aMin*/ |
| p = ML_(write_Addr)(p, ~0); /*aMax*/ |
| p = ML_(write_UShort)(p, nbytes); /*nbytes*/ |
| ML_(cur_read_get)(p, block, nbytes); p += nbytes; |
| p = ML_(write_UChar)(p, 1); /*isEnd*/ |
| |
| vg_assert( (SizeT)(p - pstart) == bytesReqd); |
| vg_assert( &gx->payload[bytesReqd] |
| == ((UChar*)gx) + sizeof(GExpr) + bytesReqd ); |
| |
| return gx; |
| } |
| |
| __attribute__((noinline)) |
| static GExpr* make_general_GX ( CUConst* cc, |
| Bool td3, |
| ULong debug_loc_offset, |
| Addr svma_of_referencing_CU ) |
| { |
| Addr base; |
| Cursor loc; |
| XArray* xa; /* XArray of UChar */ |
| GExpr* gx; |
| Word nbytes; |
| |
| vg_assert(sizeof(UWord) == sizeof(Addr)); |
| if (!ML_(sli_is_valid)(cc->escn_debug_loc) || cc->escn_debug_loc.szB == 0) |
| cc->barf("make_general_GX: .debug_loc is empty/missing"); |
| |
| init_Cursor( &loc, cc->escn_debug_loc, 0, cc->barf, |
| "Overrun whilst reading .debug_loc section(2)" ); |
| set_position_of_Cursor( &loc, debug_loc_offset ); |
| |
| TRACE_D3("make_general_GX (.debug_loc_offset = %llu, ioff = %llu) {\n", |
| debug_loc_offset, (ULong)get_DiCursor_from_Cursor(&loc).ioff ); |
| |
| /* Who frees this xa? It is freed before this fn exits. */ |
| xa = VG_(newXA)( ML_(dinfo_zalloc), "di.readdwarf3.mgGX.1", |
| ML_(dinfo_free), |
| sizeof(UChar) ); |
| |
| { UChar c = 1; /*biasMe*/ VG_(addBytesToXA)( xa, &c, sizeof(c) ); } |
| |
| base = 0; |
| while (True) { |
| Bool acquire; |
| UWord len; |
| /* Read a (host-)word pair. This is something of a hack since |
| the word size to read is really dictated by the ELF file; |
| however, we assume we're reading a file with the same |
| word-sizeness as the host. Reasonably enough. */ |
| UWord w1 = get_UWord( &loc ); |
| UWord w2 = get_UWord( &loc ); |
| |
| TRACE_D3(" %08lx %08lx\n", w1, w2); |
| if (w1 == 0 && w2 == 0) |
| break; /* end of list */ |
| |
| if (w1 == -1UL) { |
| /* new value for 'base' */ |
| base = w2; |
| continue; |
| } |
| |
| /* else a location expression follows */ |
| /* else enumerate [w1+base, w2+base) */ |
| /* w2 is 1 past end of range, as per D3 defn for "DW_AT_high_pc" |
| (sec 2.17.2) */ |
| if (w1 > w2) { |
| TRACE_D3("negative range is for .debug_loc expr at " |
| "file offset %llu\n", |
| debug_loc_offset); |
| cc->barf( "negative range in .debug_loc section" ); |
| } |
| |
| /* ignore zero length ranges */ |
| acquire = w1 < w2; |
| len = (UWord)get_UShort( &loc ); |
| |
| if (acquire) { |
| UWord w; |
| UShort s; |
| UChar c; |
| c = 0; /* !isEnd*/ |
| VG_(addBytesToXA)( xa, &c, sizeof(c) ); |
| w = w1 + base + svma_of_referencing_CU; |
| VG_(addBytesToXA)( xa, &w, sizeof(w) ); |
| w = w2 -1 + base + svma_of_referencing_CU; |
| VG_(addBytesToXA)( xa, &w, sizeof(w) ); |
| s = (UShort)len; |
| VG_(addBytesToXA)( xa, &s, sizeof(s) ); |
| } |
| |
| while (len > 0) { |
| UChar byte = get_UChar( &loc ); |
| TRACE_D3("%02x", (UInt)byte); |
| if (acquire) |
| VG_(addBytesToXA)( xa, &byte, 1 ); |
| len--; |
| } |
| TRACE_D3("\n"); |
| } |
| |
| { UChar c = 1; /*isEnd*/ VG_(addBytesToXA)( xa, &c, sizeof(c) ); } |
| |
| nbytes = VG_(sizeXA)( xa ); |
| vg_assert(nbytes >= 1); |
| |
| gx = ML_(dinfo_zalloc)( "di.readdwarf3.mgGX.2", sizeof(GExpr) + nbytes ); |
| vg_assert(gx); |
| VG_(memcpy)( &gx->payload[0], (UChar*)VG_(indexXA)(xa,0), nbytes ); |
| vg_assert( &gx->payload[nbytes] |
| == ((UChar*)gx) + sizeof(GExpr) + nbytes ); |
| |
| VG_(deleteXA)( xa ); |
| |
| TRACE_D3("}\n"); |
| |
| return gx; |
| } |
| |
| |
| /*------------------------------------------------------------*/ |
| /*--- ---*/ |
| /*--- Helper functions for range lists and CU headers ---*/ |
| /*--- ---*/ |
| /*------------------------------------------------------------*/ |
| |
| /* Denotes an address range. Both aMin and aMax are included in the |
| range; hence a complete range is (0, ~0) and an empty range is any |
| (X, X-1) for X > 0.*/ |
| typedef |
| struct { Addr aMin; Addr aMax; } |
| AddrRange; |
| |
| |
| /* Generate an arbitrary structural total ordering on |
| XArray* of AddrRange. */ |
| static Word cmp__XArrays_of_AddrRange ( XArray* rngs1, XArray* rngs2 ) |
| { |
| Word n1, n2, i; |
| tl_assert(rngs1 && rngs2); |
| n1 = VG_(sizeXA)( rngs1 ); |
| n2 = VG_(sizeXA)( rngs2 ); |
| if (n1 < n2) return -1; |
| if (n1 > n2) return 1; |
| for (i = 0; i < n1; i++) { |
| AddrRange* rng1 = (AddrRange*)VG_(indexXA)( rngs1, i ); |
| AddrRange* rng2 = (AddrRange*)VG_(indexXA)( rngs2, i ); |
| if (rng1->aMin < rng2->aMin) return -1; |
| if (rng1->aMin > rng2->aMin) return 1; |
| if (rng1->aMax < rng2->aMax) return -1; |
| if (rng1->aMax > rng2->aMax) return 1; |
| } |
| return 0; |
| } |
| |
| |
| __attribute__((noinline)) |
| static XArray* /* of AddrRange */ empty_range_list ( void ) |
| { |
| XArray* xa; /* XArray of AddrRange */ |
| /* Who frees this xa? varstack_preen() does. */ |
| xa = VG_(newXA)( ML_(dinfo_zalloc), "di.readdwarf3.erl.1", |
| ML_(dinfo_free), |
| sizeof(AddrRange) ); |
| return xa; |
| } |
| |
| |
| __attribute__((noinline)) |
| static XArray* unitary_range_list ( Addr aMin, Addr aMax ) |
| { |
| XArray* xa; |
| AddrRange pair; |
| vg_assert(aMin <= aMax); |
| /* Who frees this xa? varstack_preen() does. */ |
| xa = VG_(newXA)( ML_(dinfo_zalloc), "di.readdwarf3.url.1", |
| ML_(dinfo_free), |
| sizeof(AddrRange) ); |
| pair.aMin = aMin; |
| pair.aMax = aMax; |
| VG_(addToXA)( xa, &pair ); |
| return xa; |
| } |
| |
| |
| /* Enumerate the address ranges starting at img-offset |
| 'debug_ranges_offset' in .debug_ranges. Results are biased with |
| 'svma_of_referencing_CU' and so I believe are correct SVMAs for the |
| object as a whole. This function allocates the XArray, and the |
| caller must deallocate it. */ |
| __attribute__((noinline)) |
| static XArray* /* of AddrRange */ |
| get_range_list ( CUConst* cc, |
| Bool td3, |
| UWord debug_ranges_offset, |
| Addr svma_of_referencing_CU ) |
| { |
| Addr base; |
| Cursor ranges; |
| XArray* xa; /* XArray of AddrRange */ |
| AddrRange pair; |
| |
| if (!ML_(sli_is_valid)(cc->escn_debug_ranges) |
| || cc->escn_debug_ranges.szB == 0) |
| cc->barf("get_range_list: .debug_ranges is empty/missing"); |
| |
| init_Cursor( &ranges, cc->escn_debug_ranges, 0, cc->barf, |
| "Overrun whilst reading .debug_ranges section(2)" ); |
| set_position_of_Cursor( &ranges, debug_ranges_offset ); |
| |
| /* Who frees this xa? varstack_preen() does. */ |
| xa = VG_(newXA)( ML_(dinfo_zalloc), "di.readdwarf3.grl.1", ML_(dinfo_free), |
| sizeof(AddrRange) ); |
| base = 0; |
| while (True) { |
| /* Read a (host-)word pair. This is something of a hack since |
| the word size to read is really dictated by the ELF file; |
| however, we assume we're reading a file with the same |
| word-sizeness as the host. Reasonably enough. */ |
| UWord w1 = get_UWord( &ranges ); |
| UWord w2 = get_UWord( &ranges ); |
| |
| if (w1 == 0 && w2 == 0) |
| break; /* end of list. */ |
| |
| if (w1 == -1UL) { |
| /* new value for 'base' */ |
| base = w2; |
| continue; |
| } |
| |
| /* else enumerate [w1+base, w2+base) */ |
| /* w2 is 1 past end of range, as per D3 defn for "DW_AT_high_pc" |
| (sec 2.17.2) */ |
| if (w1 > w2) |
| cc->barf( "negative range in .debug_ranges section" ); |
| if (w1 < w2) { |
| pair.aMin = w1 + base + svma_of_referencing_CU; |
| pair.aMax = w2 - 1 + base + svma_of_referencing_CU; |
| vg_assert(pair.aMin <= pair.aMax); |
| VG_(addToXA)( xa, &pair ); |
| } |
| } |
| return xa; |
| } |
| |
| |
| /* Parse the Compilation Unit header indicated at 'c' and |
| initialise 'cc' accordingly. */ |
| static __attribute__((noinline)) |
| void parse_CU_Header ( /*OUT*/CUConst* cc, |
| Bool td3, |
| Cursor* c, |
| DiSlice escn_debug_abbv, |
| Bool type_unit, |
| Bool alt_info ) |
| { |
| UChar address_size; |
| ULong debug_abbrev_offset; |
| Int i; |
| |
| VG_(memset)(cc, 0, sizeof(*cc)); |
| vg_assert(c && c->barf); |
| cc->barf = c->barf; |
| |
| /* initial_length field */ |
| cc->unit_length |
| = get_Initial_Length( &cc->is_dw64, c, |
| "parse_CU_Header: invalid initial-length field" ); |
| |
| TRACE_D3(" Length: %lld\n", cc->unit_length ); |
| |
| /* version */ |
| cc->version = get_UShort( c ); |
| if (cc->version != 2 && cc->version != 3 && cc->version != 4) |
| cc->barf( "parse_CU_Header: is neither DWARF2 nor DWARF3 nor DWARF4" ); |
| TRACE_D3(" Version: %d\n", (Int)cc->version ); |
| |
| /* debug_abbrev_offset */ |
| debug_abbrev_offset = get_Dwarfish_UWord( c, cc->is_dw64 ); |
| if (debug_abbrev_offset >= escn_debug_abbv.szB) |
| cc->barf( "parse_CU_Header: invalid debug_abbrev_offset" ); |
| TRACE_D3(" Abbrev Offset: %lld\n", debug_abbrev_offset ); |
| |
| /* address size. If this isn't equal to the host word size, just |
| give up. This makes it safe to assume elsewhere that |
| DW_FORM_addr and DW_FORM_ref_addr can be treated as a host |
| word. */ |
| address_size = get_UChar( c ); |
| if (address_size != sizeof(void*)) |
| cc->barf( "parse_CU_Header: invalid address_size" ); |
| TRACE_D3(" Pointer Size: %d\n", (Int)address_size ); |
| |
| cc->is_type_unit = type_unit; |
| cc->is_alt_info = alt_info; |
| |
| if (type_unit) { |
| cc->type_signature = get_ULong( c ); |
| cc->type_offset = get_Dwarfish_UWord( c, cc->is_dw64 ); |
| } |
| |
| /* Set up cc->debug_abbv to point to the relevant table for this |
| CU. Set its .szB so that at least we can't read off the end of |
| the debug_abbrev section -- potentially (and quite likely) too |
| big, if this isn't the last table in the section, but at least |
| it's safe. |
| |
| This amounts to taking debug_abbv_escn and moving the start |
| position along by debug_abbrev_offset bytes, hence forming a |
| smaller DiSlice which has the same end point. Since we checked |
| just above that debug_abbrev_offset is less than the size of |
| debug_abbv_escn, this should leave us with a nonempty slice. */ |
| vg_assert(debug_abbrev_offset < escn_debug_abbv.szB); |
| cc->debug_abbv = escn_debug_abbv; |
| cc->debug_abbv.ioff += debug_abbrev_offset; |
| cc->debug_abbv.szB -= debug_abbrev_offset; |
| |
| /* and empty out the set_abbv_Cursor cache */ |
| if (0) VG_(printf)("XXXXXX initialise set_abbv_Cursor cache\n"); |
| for (i = 0; i < N_ABBV_CACHE; i++) { |
| cc->saC_cache[i].abbv_code = (ULong)-1; /* unused */ |
| cc->saC_cache[i].posn = 0; |
| } |
| cc->saC_cache_queries = 0; |
| cc->saC_cache_misses = 0; |
| } |
| |
| |
| /* Set up 'c' so it is ready to parse the abbv table entry code |
| 'abbv_code' for this compilation unit. */ |
| static __attribute__((noinline)) |
| void set_abbv_Cursor ( /*OUT*/Cursor* c, Bool td3, |
| CUConst* cc, ULong abbv_code ) |
| { |
| Int i; |
| ULong acode; |
| |
| if (abbv_code == 0) |
| cc->barf("set_abbv_Cursor: abbv_code == 0" ); |
| |
| /* (ULong)-1 is used to represent an empty cache slot. So we can't |
| allow it. In any case no valid DWARF3 should make a reference |
| to a negative abbreviation code. [at least, they always seem to |
| be numbered upwards from zero as far as I have seen] */ |
| vg_assert(abbv_code != (ULong)-1); |
| |
| /* First search the cache. */ |
| if (0) VG_(printf)("XXXXXX search set_abbv_Cursor cache\n"); |
| cc->saC_cache_queries++; |
| for (i = 0; i < N_ABBV_CACHE; i++) { |
| /* No need to test the cached abbv_codes for -1 (empty), since |
| we just asserted that abbv_code is not -1. */ |
| if (LIKELY(cc->saC_cache[i].abbv_code == abbv_code)) { |
| /* Found it. Set up the parser using the cached position, |
| and move this cache entry to the front. */ |
| if (0) VG_(printf)("XXXXXX found in set_abbv_Cursor cache\n"); |
| init_Cursor( c, cc->debug_abbv, cc->saC_cache[i].posn, |
| cc->barf, |
| "Overrun whilst parsing .debug_abbrev section(1)" ); |
| if (i > 0) { |
| ULong t_abbv_code = cc->saC_cache[i].abbv_code; |
| UWord t_posn = cc->saC_cache[i].posn; |
| while (i > 0) { |
| cc->saC_cache[i] = cc->saC_cache[i-1]; |
| i--; |
| } |
| cc->saC_cache[0].abbv_code = t_abbv_code; |
| cc->saC_cache[0].posn = t_posn; |
| } |
| return; |
| } |
| } |
| |
| /* No. It's not in the cache. We have to search through |
| .debug_abbrev, of course taking care to update the cache |
| when done. */ |
| |
| cc->saC_cache_misses++; |
| init_Cursor( c, cc->debug_abbv, 0, cc->barf, |
| "Overrun whilst parsing .debug_abbrev section(2)" ); |
| |
| /* Now iterate though the table until we find the requested |
| entry. */ |
| while (True) { |
| //ULong atag; |
| //UInt has_children; |
| acode = get_ULEB128( c ); |
| if (acode == 0) break; /* end of the table */ |
| if (acode == abbv_code) break; /* found it */ |
| /*atag = */ get_ULEB128( c ); |
| /*has_children = */ get_UChar( c ); |
| //TRACE_D3(" %llu %s [%s]\n", |
| // acode, pp_DW_TAG(atag), pp_DW_children(has_children)); |
| while (True) { |
| ULong at_name = get_ULEB128( c ); |
| ULong at_form = get_ULEB128( c ); |
| if (at_name == 0 && at_form == 0) break; |
| //TRACE_D3(" %18s %s\n", |
| // pp_DW_AT(at_name), pp_DW_FORM(at_form)); |
| } |
| } |
| |
| if (acode == 0) { |
| /* Not found. This is fatal. */ |
| cc->barf("set_abbv_Cursor: abbv_code not found"); |
| } |
| |
| /* Otherwise, 'c' is now set correctly to parse the relevant entry, |
| starting from the abbreviation entry's tag. So just cache |
| the result, and return. */ |
| for (i = N_ABBV_CACHE-1; i > N_ABBV_CACHE/2; i--) { |
| cc->saC_cache[i] = cc->saC_cache[i-1]; |
| } |
| if (0) VG_(printf)("XXXXXX update set_abbv_Cursor cache\n"); |
| cc->saC_cache[N_ABBV_CACHE/2].abbv_code = abbv_code; |
| cc->saC_cache[N_ABBV_CACHE/2].posn = get_position_of_Cursor(c); |
| } |
| |
| /* This represents a single signatured type. It maps a type signature |
| (a ULong) to a cooked DIE offset. Objects of this type are stored |
| in the type signature hash table. */ |
| typedef |
| struct D3SignatureType { |
| struct D3SignatureType *next; |
| UWord data; |
| ULong type_signature; |
| UWord die; |
| } |
| D3SignatureType; |
| |
| /* Record a signatured type in the hash table. */ |
| static void record_signatured_type ( VgHashTable tab, |
| ULong type_signature, |
| UWord die ) |
| { |
| D3SignatureType *dstype = ML_(dinfo_zalloc) ( "di.readdwarf3.sigtype", |
| sizeof(D3SignatureType) ); |
| dstype->data = (UWord) type_signature; |
| dstype->type_signature = type_signature; |
| dstype->die = die; |
| VG_(HT_add_node) ( tab, dstype ); |
| } |
| |
| /* Given a type signature hash table and a type signature, return the |
| cooked DIE offset of the type. If the type cannot be found, call |
| BARF. */ |
| static UWord lookup_signatured_type ( VgHashTable tab, |
| ULong type_signature, |
| void (*barf)( const HChar* ) __attribute__((noreturn)) ) |
| { |
| D3SignatureType *dstype = VG_(HT_lookup) ( tab, (UWord) type_signature ); |
| /* This may be unwarranted chumminess with the hash table |
| implementation. */ |
| while ( dstype != NULL && dstype->type_signature != type_signature) |
| dstype = dstype->next; |
| if (dstype == NULL) { |
| barf("lookup_signatured_type: could not find signatured type"); |
| /*NOTREACHED*/ |
| vg_assert(0); |
| } |
| return dstype->die; |
| } |
| |
| |
| /* Represents Form data. If szB is 1/2/4/8 then the result is in the |
| lowest 1/2/4/8 bytes of u.val. If szB is zero or negative then the |
| result is an image section beginning at u.cur and with size -szB. |
| No other szB values are allowed. */ |
| typedef |
| struct { |
| Long szB; // 1, 2, 4, 8 or non-positive values only. |
| union { ULong val; DiCursor cur; } u; |
| } |
| FormContents; |
| |
| /* From 'c', get the Form data into 'cts'. Either it gets a 1/2/4/8 |
| byte scalar value, or (a reference to) zero or more bytes starting |
| at a DiCursor.*/ |
| static |
| void get_Form_contents ( /*OUT*/FormContents* cts, |
| CUConst* cc, Cursor* c, |
| Bool td3, DW_FORM form ) |
| { |
| VG_(bzero_inline)(cts, sizeof(*cts)); |
| switch (form) { |
| case DW_FORM_data1: |
| cts->u.val = (ULong)(UChar)get_UChar(c); |
| cts->szB = 1; |
| TRACE_D3("%u", (UInt)cts->u.val); |
| break; |
| case DW_FORM_data2: |
| cts->u.val = (ULong)(UShort)get_UShort(c); |
| cts->szB = 2; |
| TRACE_D3("%u", (UInt)cts->u.val); |
| break; |
| case DW_FORM_data4: |
| cts->u.val = (ULong)(UInt)get_UInt(c); |
| cts->szB = 4; |
| TRACE_D3("%u", (UInt)cts->u.val); |
| break; |
| case DW_FORM_data8: |
| cts->u.val = get_ULong(c); |
| cts->szB = 8; |
| TRACE_D3("%llu", cts->u.val); |
| break; |
| case DW_FORM_sec_offset: |
| cts->u.val = (ULong)get_Dwarfish_UWord( c, cc->is_dw64 ); |
| cts->szB = cc->is_dw64 ? 8 : 4; |
| TRACE_D3("%llu", cts->u.val); |
| break; |
| case DW_FORM_sdata: |
| cts->u.val = (ULong)(Long)get_SLEB128(c); |
| cts->szB = 8; |
| TRACE_D3("%lld", (Long)cts->u.val); |
| break; |
| case DW_FORM_udata: |
| cts->u.val = (ULong)(Long)get_ULEB128(c); |
| cts->szB = 8; |
| TRACE_D3("%llu", (Long)cts->u.val); |
| break; |
| case DW_FORM_addr: |
| /* note, this is a hack. DW_FORM_addr is defined as getting |
| a word the size of the target machine as defined by the |
| address_size field in the CU Header. However, |
| parse_CU_Header() rejects all inputs except those for |
| which address_size == sizeof(Word), hence we can just |
| treat it as a (host) Word. */ |
| cts->u.val = (ULong)(UWord)get_UWord(c); |
| cts->szB = sizeof(UWord); |
| TRACE_D3("0x%lx", (UWord)cts->u.val); |
| break; |
| |
| case DW_FORM_ref_addr: |
| /* We make the same word-size assumption as DW_FORM_addr. */ |
| /* What does this really mean? From D3 Sec 7.5.4, |
| description of "reference", it would appear to reference |
| some other DIE, by specifying the offset from the |
| beginning of a .debug_info section. The D3 spec mentions |
| that this might be in some other shared object and |
| executable. But I don't see how the name of the other |
| object/exe is specified. |
| |
| At least for the DW_FORM_ref_addrs created by icc11, the |
| references seem to be within the same object/executable. |
| So for the moment we merely range-check, to see that they |
| actually do specify a plausible offset within this |
| object's .debug_info, and return the value unchanged. |
| |
| In DWARF 2, DW_FORM_ref_addr is address-sized, but in |
| DWARF 3 and later, it is offset-sized. |
| */ |
| if (cc->version == 2) { |
| cts->u.val = (ULong)(UWord)get_UWord(c); |
| cts->szB = sizeof(UWord); |
| } else { |
| cts->u.val = get_Dwarfish_UWord(c, cc->is_dw64); |
| cts->szB = cc->is_dw64 ? sizeof(ULong) : sizeof(UInt); |
| } |
| TRACE_D3("0x%lx", (UWord)cts->u.val); |
| if (0) VG_(printf)("DW_FORM_ref_addr 0x%lx\n", (UWord)cts->u.val); |
| if (/* the following is surely impossible, but ... */ |
| !ML_(sli_is_valid)(cc->escn_debug_info) |
| || cts->u.val >= (ULong)cc->escn_debug_info.szB) { |
| /* Hmm. Offset is nonsensical for this object's .debug_info |
| section. Be safe and reject it. */ |
| cc->barf("get_Form_contents: DW_FORM_ref_addr points " |
| "outside .debug_info"); |
| } |
| break; |
| |
| case DW_FORM_strp: { |
| /* this is an offset into .debug_str */ |
| UWord uw = (UWord)get_Dwarfish_UWord( c, cc->is_dw64 ); |
| if (!ML_(sli_is_valid)(cc->escn_debug_str) |
| || uw >= cc->escn_debug_str.szB) |
| cc->barf("get_Form_contents: DW_FORM_strp " |
| "points outside .debug_str"); |
| /* FIXME: check the entire string lies inside debug_str, |
| not just the first byte of it. */ |
| DiCursor str |
| = ML_(cur_plus)( ML_(cur_from_sli)(cc->escn_debug_str), uw ); |
| if (td3) { |
| HChar* tmp = ML_(cur_read_strdup)(str, "di.getFC.1"); |
| TRACE_D3("(indirect string, offset: 0x%lx): %s", uw, tmp); |
| ML_(dinfo_free)(tmp); |
| } |
| cts->u.cur = str; |
| cts->szB = - (Long)(1 + (ULong)ML_(cur_strlen)(str)); |
| break; |
| } |
| case DW_FORM_string: { |
| DiCursor str = get_AsciiZ(c); |
| if (td3) { |
| HChar* tmp = ML_(cur_read_strdup)(str, "di.getFC.2"); |
| TRACE_D3("%s", tmp); |
| ML_(dinfo_free)(tmp); |
| } |
| cts->u.cur = str; |
| /* strlen is safe because get_AsciiZ already 'vetted' the |
| entire string */ |
| cts->szB = - (Long)(1 + (ULong)ML_(cur_strlen)(str)); |
| break; |
| } |
| case DW_FORM_ref1: { |
| UChar u8 = get_UChar(c); |
| UWord res = cc->cu_start_offset + (UWord)u8; |
| cts->u.val = (ULong)res; |
| cts->szB = sizeof(UWord); |
| TRACE_D3("<%lx>", res); |
| break; |
| } |
| case DW_FORM_ref2: { |
| UShort u16 = get_UShort(c); |
| UWord res = cc->cu_start_offset + (UWord)u16; |
| cts->u.val = (ULong)res; |
| cts->szB = sizeof(UWord); |
| TRACE_D3("<%lx>", res); |
| break; |
| } |
| case DW_FORM_ref4: { |
| UInt u32 = get_UInt(c); |
| UWord res = cc->cu_start_offset + (UWord)u32; |
| cts->u.val = (ULong)res; |
| cts->szB = sizeof(UWord); |
| TRACE_D3("<%lx>", res); |
| break; |
| } |
| case DW_FORM_ref8: { |
| ULong u64 = get_ULong(c); |
| UWord res = cc->cu_start_offset + (UWord)u64; |
| cts->u.val = (ULong)res; |
| cts->szB = sizeof(UWord); |
| TRACE_D3("<%lx>", res); |
| break; |
| } |
| case DW_FORM_ref_udata: { |
| ULong u64 = get_ULEB128(c); |
| UWord res = cc->cu_start_offset + (UWord)u64; |
| cts->u.val = (ULong)res; |
| cts->szB = sizeof(UWord); |
| TRACE_D3("<%lx>", res); |
| break; |
| } |
| case DW_FORM_flag: { |
| UChar u8 = get_UChar(c); |
| TRACE_D3("%u", (UInt)u8); |
| cts->u.val = (ULong)u8; |
| cts->szB = 1; |
| break; |
| } |
| case DW_FORM_flag_present: |
| TRACE_D3("1"); |
| cts->u.val = 1; |
| cts->szB = 1; |
| break; |
| case DW_FORM_block1: { |
| ULong u64b; |
| ULong u64 = (ULong)get_UChar(c); |
| DiCursor block = get_DiCursor_from_Cursor(c); |
| TRACE_D3("%llu byte block: ", u64); |
| for (u64b = u64; u64b > 0; u64b--) { |
| UChar u8 = get_UChar(c); |
| TRACE_D3("%x ", (UInt)u8); |
| } |
| cts->u.cur = block; |
| cts->szB = - (Long)u64; |
| break; |
| } |
| case DW_FORM_block2: { |
| ULong u64b; |
| ULong u64 = (ULong)get_UShort(c); |
| DiCursor block = get_DiCursor_from_Cursor(c); |
| TRACE_D3("%llu byte block: ", u64); |
| for (u64b = u64; u64b > 0; u64b--) { |
| UChar u8 = get_UChar(c); |
| TRACE_D3("%x ", (UInt)u8); |
| } |
| cts->u.cur = block; |
| cts->szB = - (Long)u64; |
| break; |
| } |
| case DW_FORM_block4: { |
| ULong u64b; |
| ULong u64 = (ULong)get_UInt(c); |
| DiCursor block = get_DiCursor_from_Cursor(c); |
| TRACE_D3("%llu byte block: ", u64); |
| for (u64b = u64; u64b > 0; u64b--) { |
| UChar u8 = get_UChar(c); |
| TRACE_D3("%x ", (UInt)u8); |
| } |
| cts->u.cur = block; |
| cts->szB = - (Long)u64; |
| break; |
| } |
| case DW_FORM_exprloc: |
| case DW_FORM_block: { |
| ULong u64b; |
| ULong u64 = (ULong)get_ULEB128(c); |
| DiCursor block = get_DiCursor_from_Cursor(c); |
| TRACE_D3("%llu byte block: ", u64); |
| for (u64b = u64; u64b > 0; u64b--) { |
| UChar u8 = get_UChar(c); |
| TRACE_D3("%x ", (UInt)u8); |
| } |
| cts->u.cur = block; |
| cts->szB = - (Long)u64; |
| break; |
| } |
| case DW_FORM_ref_sig8: { |
| ULong u64b; |
| ULong signature = get_ULong (c); |
| ULong work = signature; |
| TRACE_D3("8 byte signature: "); |
| for (u64b = 8; u64b > 0; u64b--) { |
| UChar u8 = work & 0xff; |
| TRACE_D3("%x ", (UInt)u8); |
| work >>= 8; |
| } |
| /* Due to the way that the hash table is constructed, the |
| resulting DIE offset here is already "cooked". See |
| cook_die_using_form. */ |
| cts->u.val = lookup_signatured_type (cc->signature_types, signature, |
| c->barf); |
| cts->szB = sizeof(UWord); |
| break; |
| } |
| case DW_FORM_indirect: |
| get_Form_contents (cts, cc, c, td3, (DW_FORM)get_ULEB128(c)); |
| return; |
| |
| case DW_FORM_GNU_ref_alt: |
| cts->u.val = get_Dwarfish_UWord(c, cc->is_dw64); |
| cts->szB = cc->is_dw64 ? sizeof(ULong) : sizeof(UInt); |
| TRACE_D3("0x%lx", (UWord)cts->u.val); |
| if (0) VG_(printf)("DW_FORM_GNU_ref_alt 0x%lx\n", (UWord)cts->u.val); |
| if (/* the following is surely impossible, but ... */ |
| !ML_(sli_is_valid)(cc->escn_debug_info_alt) |
| || cts->u.val >= (ULong)cc->escn_debug_info_alt.szB) { |
| /* Hmm. Offset is nonsensical for this object's .debug_info |
| section. Be safe and reject it. */ |
| cc->barf("get_Form_contents: DW_FORM_ref_addr points " |
| "outside alternate .debug_info"); |
| } |
| break; |
| |
| case DW_FORM_GNU_strp_alt: { |
| /* this is an offset into alternate .debug_str */ |
| SizeT uw = (UWord)get_Dwarfish_UWord( c, cc->is_dw64 ); |
| if (!ML_(sli_is_valid)(cc->escn_debug_str_alt) |
| || uw >= cc->escn_debug_str_alt.szB) |
| cc->barf("get_Form_contents: DW_FORM_GNU_strp_alt " |
| "points outside alternate .debug_str"); |
| /* FIXME: check the entire string lies inside debug_str, |
| not just the first byte of it. */ |
| DiCursor str |
| = ML_(cur_plus)( ML_(cur_from_sli)(cc->escn_debug_str_alt), uw); |
| if (td3) { |
| HChar* tmp = ML_(cur_read_strdup)(str, "di.getFC.3"); |
| TRACE_D3("(indirect alt string, offset: 0x%lx): %s", uw, tmp); |
| ML_(dinfo_free)(tmp); |
| } |
| cts->u.cur = str; |
| cts->szB = - (Long)(1 + (ULong)ML_(cur_strlen)(str)); |
| break; |
| } |
| |
| default: |
| VG_(printf)( |
| "get_Form_contents: unhandled %d (%s) at <%llx>\n", |
| form, ML_(pp_DW_FORM)(form), get_position_of_Cursor(c)); |
| c->barf("get_Form_contents: unhandled DW_FORM"); |
| } |
| } |
| |
| |
| /*------------------------------------------------------------*/ |
| /*--- ---*/ |
| /*--- Parsing of variable-related DIEs ---*/ |
| /*--- ---*/ |
| /*------------------------------------------------------------*/ |
| |
| typedef |
| struct _TempVar { |
| HChar* name; /* in DebugInfo's .strchunks */ |
| /* Represent ranges economically. nRanges is the number of |
| ranges. Cases: |
| 0: .rngOneMin .rngOneMax .manyRanges are all zero |
| 1: .rngOneMin .rngOneMax hold the range; .rngMany is NULL |
| 2: .rngOneMin .rngOneMax are zero; .rngMany holds the ranges. |
| This is merely an optimisation to avoid having to allocate |
| and free the XArray in the common (98%) of cases where there |
| is zero or one address ranges. */ |
| UWord nRanges; |
| Addr rngOneMin; |
| Addr rngOneMax; |
| XArray* rngMany; /* of AddrRange. NON-UNIQUE PTR in AR_DINFO. */ |
| /* Do not free .rngMany, since many TempVars will have the same |
| value. Instead the associated storage is to be freed by |
| deleting 'rangetree', which stores a single copy of each |
| range. */ |
| /* --- */ |
| Int level; |
| UWord typeR; /* a cuOff */ |
| GExpr* gexpr; /* for this variable */ |
| GExpr* fbGX; /* to find the frame base of the enclosing fn, if |
| any */ |
| HChar* fName; /* declaring file name, or NULL */ |
| Int fLine; /* declaring file line number, or zero */ |
| /* offset in .debug_info, so that abstract instances can be |
| found to satisfy references from concrete instances. */ |
| UWord dioff; |
| UWord absOri; /* so the absOri fields refer to dioff fields |
| in some other, related TempVar. */ |
| } |
| TempVar; |
| |
| #define N_D3_VAR_STACK 48 |
| |
| typedef |
| struct { |
| /* Contains the range stack: a stack of address ranges, one |
| stack entry for each nested scope. |
| |
| Some scope entries are created by function definitions |
| (DW_AT_subprogram), and for those, we also note the GExpr |
| derived from its DW_AT_frame_base attribute, if any. |
| Consequently it should be possible to find, for any |
| variable's DIE, the GExpr for the the containing function's |
| DW_AT_frame_base by scanning back through the stack to find |
| the nearest entry associated with a function. This somewhat |
| elaborate scheme is provided so as to make it possible to |
| obtain the correct DW_AT_frame_base expression even in the |
| presence of nested functions (or to be more precise, in the |
| presence of nested DW_AT_subprogram DIEs). |
| */ |
| Int sp; /* [sp] is innermost active entry; sp==-1 for empty |
| stack */ |
| XArray* ranges[N_D3_VAR_STACK]; /* XArray of AddrRange */ |
| Int level[N_D3_VAR_STACK]; /* D3 DIE levels */ |
| Bool isFunc[N_D3_VAR_STACK]; /* from DW_AT_subprogram? */ |
| GExpr* fbGX[N_D3_VAR_STACK]; /* if isFunc, contains the FB |
| expr, else NULL */ |
| /* The file name table. Is a mapping from integer index to the |
| (permanent) copy of the string in in DebugInfo's .strchunks. */ |
| XArray* /* of UChar* */ filenameTable; |
| } |
| D3VarParser; |
| |
| static void varstack_show ( D3VarParser* parser, const HChar* str ) { |
| Word i, j; |
| VG_(printf)(" varstack (%s) {\n", str); |
| for (i = 0; i <= parser->sp; i++) { |
| XArray* xa = parser->ranges[i]; |
| vg_assert(xa); |
| VG_(printf)(" [%ld] (level %d)", i, parser->level[i]); |
| if (parser->isFunc[i]) { |
| VG_(printf)(" (fbGX=%p)", parser->fbGX[i]); |
| } else { |
| vg_assert(parser->fbGX[i] == NULL); |
| } |
| VG_(printf)(": "); |
| if (VG_(sizeXA)( xa ) == 0) { |
| VG_(printf)("** empty PC range array **"); |
| } else { |
| for (j = 0; j < VG_(sizeXA)( xa ); j++) { |
| AddrRange* range = (AddrRange*) VG_(indexXA)( xa, j ); |
| vg_assert(range); |
| VG_(printf)("[%#lx,%#lx] ", range->aMin, range->aMax); |
| } |
| } |
| VG_(printf)("\n"); |
| } |
| VG_(printf)(" }\n"); |
| } |
| |
| /* Remove from the stack, all entries with .level > 'level' */ |
| static |
| void varstack_preen ( D3VarParser* parser, Bool td3, Int level ) |
| { |
| Bool changed = False; |
| vg_assert(parser->sp < N_D3_VAR_STACK); |
| while (True) { |
| vg_assert(parser->sp >= -1); |
| if (parser->sp == -1) break; |
| if (parser->level[parser->sp] <= level) break; |
| if (0) |
| TRACE_D3("BBBBAAAA varstack_pop [newsp=%d]\n", parser->sp-1); |
| vg_assert(parser->ranges[parser->sp]); |
| /* Who allocated this xa? get_range_list() or |
| unitary_range_list(). */ |
| VG_(deleteXA)( parser->ranges[parser->sp] ); |
| parser->ranges[parser->sp] = NULL; |
| parser->level[parser->sp] = 0; |
| parser->isFunc[parser->sp] = False; |
| parser->fbGX[parser->sp] = NULL; |
| parser->sp--; |
| changed = True; |
| } |
| if (changed && td3) |
| varstack_show( parser, "after preen" ); |
| } |
| |
| static void varstack_push ( CUConst* cc, |
| D3VarParser* parser, |
| Bool td3, |
| XArray* ranges, Int level, |
| Bool isFunc, GExpr* fbGX ) { |
| if (0) |
| TRACE_D3("BBBBAAAA varstack_push[newsp=%d]: %d %p\n", |
| parser->sp+1, level, ranges); |
| |
| /* First we need to zap everything >= 'level', as we are about to |
| replace any previous entry at 'level', so .. */ |
| varstack_preen(parser, /*td3*/False, level-1); |
| |
| vg_assert(parser->sp >= -1); |
| vg_assert(parser->sp < N_D3_VAR_STACK); |
| if (parser->sp == N_D3_VAR_STACK-1) |
| cc->barf("varstack_push: N_D3_VAR_STACK is too low; " |
| "increase and recompile"); |
| if (parser->sp >= 0) |
| vg_assert(parser->level[parser->sp] < level); |
| parser->sp++; |
| vg_assert(parser->ranges[parser->sp] == NULL); |
| vg_assert(parser->level[parser->sp] == 0); |
| vg_assert(parser->isFunc[parser->sp] == False); |
| vg_assert(parser->fbGX[parser->sp] == NULL); |
| vg_assert(ranges != NULL); |
| if (!isFunc) vg_assert(fbGX == NULL); |
| parser->ranges[parser->sp] = ranges; |
| parser->level[parser->sp] = level; |
| parser->isFunc[parser->sp] = isFunc; |
| parser->fbGX[parser->sp] = fbGX; |
| if (td3) |
| varstack_show( parser, "after push" ); |
| } |
| |
| |
| /* cts is derived from a DW_AT_location and so refers either to a |
| location expression or to a location list. Figure out which, and |
| in both cases bundle the expression or location list into a |
| so-called GExpr (guarded expression). */ |
| __attribute__((noinline)) |
| static GExpr* get_GX ( CUConst* cc, Bool td3, const FormContents* cts ) |
| { |
| GExpr* gexpr = NULL; |
| if (cts->szB < 0) { |
| /* represents a non-empty in-line location expression, and |
| cts->u.cur points at the image bytes */ |
| gexpr = make_singleton_GX( cts->u.cur, (ULong)(- cts->szB) ); |
| } |
| else |
| if (cts->szB > 0) { |
| /* represents a location list. cts->u.val is the offset of it |
| in .debug_loc. */ |
| if (!cc->cu_svma_known) |
| cc->barf("get_GX: location list, but CU svma is unknown"); |
| gexpr = make_general_GX( cc, td3, cts->u.val, cc->cu_svma ); |
| } |
| else { |
| vg_assert(0); /* else caller is bogus */ |
| } |
| return gexpr; |
| } |
| |
| |
| static |
| void read_filename_table( /*MOD*/D3VarParser* parser, |
| CUConst* cc, ULong debug_line_offset, |
| Bool td3 ) |
| { |
| Bool is_dw64; |
| Cursor c; |
| Word i; |
| UShort version; |
| UChar opcode_base; |
| HChar* str; |
| |
| vg_assert(parser && cc && cc->barf); |
| if (!ML_(sli_is_valid)(cc->escn_debug_line) |
| || cc->escn_debug_line.szB <= debug_line_offset) { |
| cc->barf("read_filename_table: .debug_line is missing?"); |
| } |
| |
| init_Cursor( &c, cc->escn_debug_line, debug_line_offset, cc->barf, |
| "Overrun whilst reading .debug_line section(1)" ); |
| |
| /* unit_length = */ |
| get_Initial_Length( &is_dw64, &c, |
| "read_filename_table: invalid initial-length field" ); |
| version = get_UShort( &c ); |
| if (version != 2 && version != 3 && version != 4) |
| cc->barf("read_filename_table: Only DWARF version 2, 3 and 4 line info " |
| "is currently supported."); |
| /*header_length = (ULong)*/ get_Dwarfish_UWord( &c, is_dw64 ); |
| /*minimum_instruction_length = */ get_UChar( &c ); |
| if (version >= 4) |
| /*maximum_operations_per_insn = */ get_UChar( &c ); |
| /*default_is_stmt = */ get_UChar( &c ); |
| /*line_base = (Char)*/ get_UChar( &c ); |
| /*line_range = */ get_UChar( &c ); |
| opcode_base = get_UChar( &c ); |
| /* skip over "standard_opcode_lengths" */ |
| for (i = 1; i < (Word)opcode_base; i++) |
| (void)get_UChar( &c ); |
| |
| /* skip over the directory names table */ |
| while (peek_UChar(&c) != 0) { |
| (void)get_AsciiZ(&c); |
| } |
| (void)get_UChar(&c); /* skip terminating zero */ |
| |
| /* Read and record the file names table */ |
| vg_assert(parser->filenameTable); |
| vg_assert( VG_(sizeXA)( parser->filenameTable ) == 0 ); |
| /* Add a dummy index-zero entry. DWARF3 numbers its files |
| from 1, for some reason. */ |
| str = ML_(addStr)( cc->di, "<unknown_file>", -1 ); |
| VG_(addToXA)( parser->filenameTable, &str ); |
| while (peek_UChar(&c) != 0) { |
| DiCursor cur = get_AsciiZ(&c); |
| str = ML_(addStrFromCursor)( cc->di, cur ); |
| TRACE_D3(" read_filename_table: %ld %s\n", |
| VG_(sizeXA)(parser->filenameTable), str); |
| VG_(addToXA)( parser->filenameTable, &str ); |
| (void)get_ULEB128( &c ); /* skip directory index # */ |
| (void)get_ULEB128( &c ); /* skip last mod time */ |
| (void)get_ULEB128( &c ); /* file size */ |
| } |
| /* We're done! The rest of it is not interesting. */ |
| } |
| |
| __attribute__((noinline)) |
| static void bad_DIE_confusion(int linenr) |
| { |
| VG_(printf)("\nparse_var_DIE(%d): confused by:\n", linenr); |
| } |
| #define goto_bad_DIE do {bad_DIE_confusion(__LINE__); goto bad_DIE;} while (0) |
| |
| __attribute__((noinline)) |
| static void parse_var_DIE ( |
| /*MOD*/WordFM* /* of (XArray* of AddrRange, void) */ rangestree, |
| /*MOD*/XArray* /* of TempVar* */ tempvars, |
| /*MOD*/XArray* /* of GExpr* */ gexprs, |
| /*MOD*/D3VarParser* parser, |
| DW_TAG dtag, |
| UWord posn, |
| Int level, |
| Cursor* c_die, |
| Cursor* c_abbv, |
| CUConst* cc, |
| Bool td3 |
| ) |
| { |
| FormContents cts; |
| |
| UWord saved_die_c_offset = get_position_of_Cursor( c_die ); |
| UWord saved_abbv_c_offset = get_position_of_Cursor( c_abbv ); |
| Bool debug_types_flag; |
| Bool alt_flag; |
| |
| varstack_preen( parser, td3, level-1 ); |
| |
| if (dtag == DW_TAG_compile_unit |
| || dtag == DW_TAG_type_unit |
| || dtag == DW_TAG_partial_unit) { |
| Bool have_lo = False; |
| Bool have_hi1 = False; |
| Bool hiIsRelative = False; |
| Bool have_range = False; |
| Addr ip_lo = 0; |
| Addr ip_hi1 = 0; |
| Addr rangeoff = 0; |
| while (True) { |
| DW_AT attr = (DW_AT) get_ULEB128( c_abbv ); |
| DW_FORM form = (DW_FORM)get_ULEB128( c_abbv ); |
| if (attr == 0 && form == 0) break; |
| get_Form_contents( &cts, cc, c_die, False/*td3*/, form ); |
| if (attr == DW_AT_low_pc && cts.szB > 0) { |
| ip_lo = cts.u.val; |
| have_lo = True; |
| } |
| if (attr == DW_AT_high_pc && cts.szB > 0) { |
| ip_hi1 = cts.u.val; |
| have_hi1 = True; |
| if (form != DW_FORM_addr) |
| hiIsRelative = True; |
| } |
| if (attr == DW_AT_ranges && cts.szB > 0) { |
| rangeoff = cts.u.val; |
| have_range = True; |
| } |
| if (attr == DW_AT_stmt_list && cts.szB > 0) { |
| read_filename_table( parser, cc, cts.u.val, td3 ); |
| } |
| } |
| if (have_lo && have_hi1 && hiIsRelative) |
| ip_hi1 += ip_lo; |
| /* Now, does this give us an opportunity to find this |
| CU's svma? */ |
| #if 0 |
| if (level == 0 && have_lo) { |
| vg_assert(!cc->cu_svma_known); /* if this fails, it must be |
| because we've already seen a DW_TAG_compile_unit DIE at level |
| 0. But that can't happen, because DWARF3 only allows exactly |
| one top level DIE per CU. */ |
| cc->cu_svma_known = True; |
| cc->cu_svma = ip_lo; |
| if (1) |
| TRACE_D3("BBBBAAAA acquire CU_SVMA of %p\n", cc->cu_svma); |
| /* Now, it may be that this DIE doesn't tell us the CU's |
| SVMA, by way of not having a DW_AT_low_pc. That's OK -- |
| the CU doesn't *have* to have its SVMA specified. |
| |
| But as per last para D3 spec sec 3.1.1 ("Normal and |
| Partial Compilation Unit Entries", "If the base address |
| (viz, the SVMA) is undefined, then any DWARF entry of |
| structure defined interms of the base address of that |
| compilation unit is not valid.". So that means, if whilst |
| processing the children of this top level DIE (or their |
| children, etc) we see a DW_AT_range, and cu_svma_known is |
| False, then the DIE that contains it is (per the spec) |
| invalid, and we can legitimately stop and complain. */ |
| } |
| #else |
| /* .. whereas The Reality is, simply assume the SVMA is zero |
| if it isn't specified. */ |
| if (level == 0) { |
| vg_assert(!cc->cu_svma_known); |
| cc->cu_svma_known = True; |
| if (have_lo) |
| cc->cu_svma = ip_lo; |
| else |
| cc->cu_svma = 0; |
| } |
| #endif |
| /* Do we have something that looks sane? */ |
| if (have_lo && have_hi1 && (!have_range)) { |
| if (ip_lo < ip_hi1) |
| varstack_push( cc, parser, td3, |
| unitary_range_list(ip_lo, ip_hi1 - 1), |
| level, |
| False/*isFunc*/, NULL/*fbGX*/ ); |
| } else |
| if ((!have_lo) && (!have_hi1) && have_range) { |
| varstack_push( cc, parser, td3, |
| get_range_list( cc, td3, |
| rangeoff, cc->cu_svma ), |
| level, |
| False/*isFunc*/, NULL/*fbGX*/ ); |
| } else |
| if ((!have_lo) && (!have_hi1) && (!have_range)) { |
| /* CU has no code, presumably? */ |
| varstack_push( cc, parser, td3, |
| empty_range_list(), |
| level, |
| False/*isFunc*/, NULL/*fbGX*/ ); |
| } else |
| if (have_lo && (!have_hi1) && have_range && ip_lo == 0) { |
| /* broken DIE created by gcc-4.3.X ? Ignore the |
| apparently-redundant DW_AT_low_pc and use the DW_AT_ranges |
| instead. */ |
| varstack_push( cc, parser, td3, |
| get_range_list( cc, td3, |
| rangeoff, cc->cu_svma ), |
| level, |
| False/*isFunc*/, NULL/*fbGX*/ ); |
| } else { |
| if (0) VG_(printf)("I got hlo %d hhi1 %d hrange %d\n", |
| (Int)have_lo, (Int)have_hi1, (Int)have_range); |
| goto_bad_DIE; |
| } |
| } |
| |
| if (dtag == DW_TAG_lexical_block || dtag == DW_TAG_subprogram) { |
| Bool have_lo = False; |
| Bool have_hi1 = False; |
| Bool have_range = False; |
| Bool hiIsRelative = False; |
| Addr ip_lo = 0; |
| Addr ip_hi1 = 0; |
| Addr rangeoff = 0; |
| Bool isFunc = dtag == DW_TAG_subprogram; |
| GExpr* fbGX = NULL; |
| while (True) { |
| DW_AT attr = (DW_AT) get_ULEB128( c_abbv ); |
| DW_FORM form = (DW_FORM)get_ULEB128( c_abbv ); |
| if (attr == 0 && form == 0) break; |
| get_Form_contents( &cts, cc, c_die, False/*td3*/, form ); |
| if (attr == DW_AT_low_pc && cts.szB > 0) { |
| ip_lo = cts.u.val; |
| have_lo = True; |
| } |
| if (attr == DW_AT_high_pc && cts.szB > 0) { |
| ip_hi1 = cts.u.val; |
| have_hi1 = True; |
| if (form != DW_FORM_addr) |
| hiIsRelative = True; |
| } |
| if (attr == DW_AT_ranges && cts.szB > 0) { |
| rangeoff = cts.u.val; |
| have_range = True; |
| } |
| if (isFunc |
| && attr == DW_AT_frame_base |
| && cts.szB != 0 /* either scalar or nonempty block */) { |
| fbGX = get_GX( cc, False/*td3*/, &cts ); |
| vg_assert(fbGX); |
| VG_(addToXA)(gexprs, &fbGX); |
| } |
| } |
| if (have_lo && have_hi1 && hiIsRelative) |
| ip_hi1 += ip_lo; |
| /* Do we have something that looks sane? */ |
| if (dtag == DW_TAG_subprogram |
| && (!have_lo) && (!have_hi1) && (!have_range)) { |
| /* This is legit - ignore it. Sec 3.3.3: "A subroutine entry |
| representing a subroutine declaration that is not also a |
| definition does not have code address or range |
| attributes." */ |
| } else |
| if (dtag == DW_TAG_lexical_block |
| && (!have_lo) && (!have_hi1) && (!have_range)) { |
| /* I believe this is legit, and means the lexical block |
| contains no insns (whatever that might mean). Ignore. */ |
| } else |
| if (have_lo && have_hi1 && (!have_range)) { |
| /* This scope supplies just a single address range. */ |
| if (ip_lo < ip_hi1) |
| varstack_push( cc, parser, td3, |
| unitary_range_list(ip_lo, ip_hi1 - 1), |
| level, isFunc, fbGX ); |
| } else |
| if ((!have_lo) && (!have_hi1) && have_range) { |
| /* This scope supplies multiple address ranges via the use of |
| a range list. */ |
| varstack_push( cc, parser, td3, |
| get_range_list( cc, td3, |
| rangeoff, cc->cu_svma ), |
| level, isFunc, fbGX ); |
| } else |
| if (have_lo && (!have_hi1) && (!have_range)) { |
| /* This scope is bogus. The D3 spec sec 3.4 (Lexical Block |
| Entries) says fairly clearly that a scope must have either |
| _range or (_low_pc and _high_pc). */ |
| /* The spec is a bit ambiguous though. Perhaps a single byte |
| range is intended? See sec 2.17 (Code Addresses And Ranges) */ |
| /* This case is here because icc9 produced this: |
| <2><13bd>: DW_TAG_lexical_block |
| DW_AT_decl_line : 5229 |
| DW_AT_decl_column : 37 |
| DW_AT_decl_file : 1 |
| DW_AT_low_pc : 0x401b03 |
| */ |
| /* Ignore (seems safe than pushing a single byte range) */ |
| } else |
| goto_bad_DIE; |
| } |
| |
| if (dtag == DW_TAG_variable || dtag == DW_TAG_formal_parameter) { |
| HChar* name = NULL; |
| UWord typeR = D3_INVALID_CUOFF; |
| Bool global = False; |
| GExpr* gexpr = NULL; |
| Int n_attrs = 0; |
| UWord abs_ori = (UWord)D3_INVALID_CUOFF; |
| Int lineNo = 0; |
| HChar* fileName = NULL; |
| while (True) { |
| DW_AT attr = (DW_AT) get_ULEB128( c_abbv ); |
| DW_FORM form = (DW_FORM)get_ULEB128( c_abbv ); |
| if (attr == 0 && form == 0) break; |
| get_Form_contents( &cts, cc, c_die, False/*td3*/, form ); |
| n_attrs++; |
| if (attr == DW_AT_name && cts.szB < 0) { |
| name = ML_(addStrFromCursor)( cc->di, cts.u.cur ); |
| } |
| if (attr == DW_AT_location |
| && cts.szB != 0 /* either scalar or nonempty block */) { |
| gexpr = get_GX( cc, False/*td3*/, &cts ); |
| vg_assert(gexpr); |
| VG_(addToXA)(gexprs, &gexpr); |
| } |
| if (attr == DW_AT_type && cts.szB > 0) { |
| typeR = cook_die_using_form( cc, cts.u.val, form ); |
| } |
| if (attr == DW_AT_external && cts.szB > 0 && cts.u.val > 0) { |
| global = True; |
| } |
| if (attr == DW_AT_abstract_origin && cts.szB > 0) { |
| abs_ori = (UWord)cts.u.val; |
| } |
| if (attr == DW_AT_declaration && cts.szB > 0 && cts.u.val > 0) { |
| /*declaration = True;*/ |
| } |
| if (attr == DW_AT_decl_line && cts.szB > 0) { |
| lineNo = (Int)cts.u.val; |
| } |
| if (attr == DW_AT_decl_file && cts.szB > 0) { |
| Int ftabIx = (Int)cts.u.val; |
| if (ftabIx >= 1 |
| && ftabIx < VG_(sizeXA)( parser->filenameTable )) { |
| fileName = *(HChar**) |
| VG_(indexXA)( parser->filenameTable, ftabIx ); |
| vg_assert(fileName); |
| } |
| if (0) VG_(printf)("XXX filename = %s\n", fileName); |
| } |
| } |
| if (!global && dtag == DW_TAG_variable && level == 1) { |
| /* Case of a static variable. It is better to declare |
| it global as the variable is not really related to |
| a PC range, as its address can be used by program |
| counters outside of the ranges where it is visible . */ |
| global = True; |
| } |
| |
| /* We'll collect it under if one of the following three |
| conditions holds: |
| (1) has location and type -> completed |
| (2) has type only -> is an abstract instance |
| (3) has location and abs_ori -> is a concrete instance |
| Name, filename and line number are all optional frills. |
| */ |
| if ( /* 1 */ (gexpr && typeR != D3_INVALID_CUOFF) |
| /* 2 */ || (typeR != D3_INVALID_CUOFF) |
| /* 3 */ || (gexpr && abs_ori != (UWord)D3_INVALID_CUOFF) ) { |
| |
| /* Add this variable to the list of interesting looking |
| variables. Crucially, note along with it the address |
| range(s) associated with the variable, which for locals |
| will be the address ranges at the top of the varparser's |
| stack. */ |
| GExpr* fbGX = NULL; |
| Word i, nRanges; |
| XArray* /* of AddrRange */ xa; |
| TempVar* tv; |
| /* Stack can't be empty; we put a dummy entry on it for the |
| entire address range before starting with the DIEs for |
| this CU. */ |
| vg_assert(parser->sp >= 0); |
| |
| /* If this is a local variable (non-global), try to find |
| the GExpr for the DW_AT_frame_base of the containing |
| function. It should have been pushed on the stack at the |
| time we encountered its DW_TAG_subprogram DIE, so the way |
| to find it is to scan back down the stack looking for it. |
| If there isn't an enclosing stack entry marked 'isFunc' |
| then we must be seeing variable or formal param DIEs |
| outside of a function, so we deem the Dwarf to be |
| malformed if that happens. Note that the fbGX may be NULL |
| if the containing DT_TAG_subprogram didn't supply a |
| DW_AT_frame_base -- that's OK, but there must actually be |
| a containing DW_TAG_subprogram. */ |
| if (!global) { |
| Bool found = False; |
| for (i = parser->sp; i >= 0; i--) { |
| if (parser->isFunc[i]) { |
| fbGX = parser->fbGX[i]; |
| found = True; |
| break; |
| } |
| } |
| if (!found) { |
| if (0 && VG_(clo_verbosity) >= 0) { |
| VG_(message)(Vg_DebugMsg, |
| "warning: parse_var_DIE: non-global variable " |
| "outside DW_TAG_subprogram\n"); |
| } |
| /* goto_bad_DIE; */ |
| /* This seems to happen a lot. Just ignore it -- if, |
| when we come to evaluation of the location (guarded) |
| expression, it requires a frame base value, and |
| there's no expression for that, then evaluation as a |
| whole will fail. Harmless - a bit of a waste of |
| cycles but nothing more. */ |
| } |
| } |
| |
| /* re "global ? 0 : parser->sp" (twice), if the var is |
| marked 'global' then we must put it at the global scope, |
| as only the global scope (level 0) covers the entire PC |
| address space. It is asserted elsewhere that level 0 |
| always covers the entire address space. */ |
| xa = parser->ranges[global ? 0 : parser->sp]; |
| nRanges = VG_(sizeXA)(xa); |
| vg_assert(nRanges >= 0); |
| |
| tv = ML_(dinfo_zalloc)( "di.readdwarf3.pvD.1", sizeof(TempVar) ); |
| tv->name = name; |
| tv->level = global ? 0 : parser->sp; |
| tv->typeR = typeR; |
| tv->gexpr = gexpr; |
| tv->fbGX = fbGX; |
| tv->fName = fileName; |
| tv->fLine = lineNo; |
| tv->dioff = posn; |
| tv->absOri = abs_ori; |
| |
| /* See explanation on definition of type TempVar for the |
| reason for this elaboration. */ |
| tv->nRanges = nRanges; |
| tv->rngOneMin = 0; |
| tv->rngOneMax = 0; |
| tv->rngMany = NULL; |
| if (nRanges == 1) { |
| AddrRange* range = VG_(indexXA)(xa, 0); |
| tv->rngOneMin = range->aMin; |
| tv->rngOneMax = range->aMax; |
| } |
| else if (nRanges > 1) { |
| /* See if we already have a range list which is |
| structurally identical. If so, use that; if not, clone |
| this one, and add it to our collection. */ |
| UWord keyW, valW; |
| if (VG_(lookupFM)( rangestree, &keyW, &valW, (UWord)xa )) { |
| XArray* old = (XArray*)keyW; |
| tl_assert(valW == 0); |
| tl_assert(old != xa); |
| tv->rngMany = old; |
| } else { |
| XArray* cloned = VG_(cloneXA)( "di.readdwarf3.pvD.2", xa ); |
| tv->rngMany = cloned; |
| VG_(addToFM)( rangestree, (UWord)cloned, 0 ); |
| } |
| } |
| |
| VG_(addToXA)( tempvars, &tv ); |
| |
| TRACE_D3(" Recording this variable, with %ld PC range(s)\n", |
| VG_(sizeXA)(xa) ); |
| /* collect stats on how effective the ->ranges special |
| casing is */ |
| if (0) { |
| static Int ntot=0, ngt=0; |
| ntot++; |
| if (tv->rngMany) ngt++; |
| if (0 == (ntot % 100000)) |
| VG_(printf)("XXXX %d tot, %d cloned\n", ntot, ngt); |
| } |
| |
| } |
| |
| /* Here are some other weird cases seen in the wild: |
| |
| We have a variable with a name and a type, but no |
| location. I guess that's a sign that it has been |
| optimised away. Ignore it. Here's an example: |
| |
| static Int lc_compar(void* n1, void* n2) { |
| MC_Chunk* mc1 = *(MC_Chunk**)n1; |
| MC_Chunk* mc2 = *(MC_Chunk**)n2; |
| return (mc1->data < mc2->data ? -1 : 1); |
| } |
| |
| Both mc1 and mc2 are like this |
| <2><5bc>: Abbrev Number: 21 (DW_TAG_variable) |
| DW_AT_name : mc1 |
| DW_AT_decl_file : 1 |
| DW_AT_decl_line : 216 |
| DW_AT_type : <5d3> |
| |
| whereas n1 and n2 do have locations specified. |
| |
| --------------------------------------------- |
| |
| We see a DW_TAG_formal_parameter with a type, but |
| no name and no location. It's probably part of a function type |
| construction, thusly, hence ignore it: |
| <1><2b4>: Abbrev Number: 12 (DW_TAG_subroutine_type) |
| DW_AT_sibling : <2c9> |
| DW_AT_prototyped : 1 |
| DW_AT_type : <114> |
| <2><2be>: Abbrev Number: 13 (DW_TAG_formal_parameter) |
| DW_AT_type : <13e> |
| <2><2c3>: Abbrev Number: 13 (DW_TAG_formal_parameter) |
| DW_AT_type : <133> |
| |
| --------------------------------------------- |
| |
| Is very minimal, like this: |
| <4><81d>: Abbrev Number: 44 (DW_TAG_variable) |
| DW_AT_abstract_origin: <7ba> |
| What that signifies I have no idea. Ignore. |
| |
| ---------------------------------------------- |
| |
| Is very minimal, like this: |
| <200f>: DW_TAG_formal_parameter |
| DW_AT_abstract_ori: <1f4c> |
| DW_AT_location : 13440 |
| What that signifies I have no idea. Ignore. |
| It might be significant, though: the variable at least |
| has a location and so might exist somewhere. |
| Maybe we should handle this. |
| |
| --------------------------------------------- |
| |
| <22407>: DW_TAG_variable |
| DW_AT_name : (indirect string, offset: 0x6579): |
| vgPlain_trampoline_stuff_start |
| DW_AT_decl_file : 29 |
| DW_AT_decl_line : 56 |
| DW_AT_external : 1 |
| DW_AT_declaration : 1 |
| |
| Nameless and typeless variable that has a location? Who |
| knows. Not me. |
| <2><3d178>: Abbrev Number: 22 (DW_TAG_variable) |
| DW_AT_location : 9 byte block: 3 c0 c7 13 38 0 0 0 0 |
| (DW_OP_addr: 3813c7c0) |
| |
| No, really. Check it out. gcc is quite simply borked. |
| <3><168cc>: Abbrev Number: 141 (DW_TAG_variable) |
| // followed by no attributes, and the next DIE is a sibling, |
| // not a child |
| */ |
| } |
| return; |
| |
| bad_DIE: |
| set_position_of_Cursor( c_die, saved_die_c_offset ); |
| set_position_of_Cursor( c_abbv, saved_abbv_c_offset ); |
| posn = uncook_die( cc, posn, &debug_types_flag, &alt_flag ); |
| VG_(printf)(" <%d><%lx>: %s", level, posn, ML_(pp_DW_TAG)( dtag ) ); |
| if (debug_types_flag) { |
| VG_(printf)(" (in .debug_types)"); |
| } |
| else if (alt_flag) { |
| VG_(printf)(" (in alternate .debug_info)"); |
| } |
| VG_(printf)("\n"); |
| while (True) { |
| DW_AT attr = (DW_AT) get_ULEB128( c_abbv ); |
| DW_FORM form = (DW_FORM)get_ULEB128( c_abbv ); |
| if (attr == 0 && form == 0) break; |
| VG_(printf)(" %18s: ", ML_(pp_DW_AT)(attr)); |
| /* Get the form contents, so as to print them */ |
| get_Form_contents( &cts, cc, c_die, True, form ); |
| VG_(printf)("\t\n"); |
| } |
| VG_(printf)("\n"); |
| cc->barf("parse_var_DIE: confused by the above DIE"); |
| /*NOTREACHED*/ |
| } |
| |
| |
| /*------------------------------------------------------------*/ |
| /*--- ---*/ |
| /*--- Parsing of type-related DIEs ---*/ |
| /*--- ---*/ |
| /*------------------------------------------------------------*/ |
| |
| #define N_D3_TYPE_STACK 16 |
| |
| typedef |
| struct { |
| /* What source language? 'A'=Ada83/95, |
| 'C'=C/C++, |
| 'F'=Fortran, |
| '?'=other |
| Established once per compilation unit. */ |
| UChar language; |
| /* A stack of types which are currently under construction */ |
| Int sp; /* [sp] is innermost active entry; sp==-1 for empty |
| stack */ |
| /* Note that the TyEnts in qparentE are temporary copies of the |
| ones accumulating in the main tyent array. So it is not safe |
| to free up anything on them when popping them off the stack |
| (iow, it isn't safe to use TyEnt__make_EMPTY on them). Just |
| memset them to zero when done. */ |
| TyEnt qparentE[N_D3_TYPE_STACK]; /* parent TyEnts */ |
| Int qlevel[N_D3_TYPE_STACK]; |
| |
| } |
| D3TypeParser; |
| |
| static void typestack_show ( D3TypeParser* parser, const HChar* str ) { |
| Word i; |
| VG_(printf)(" typestack (%s) {\n", str); |
| for (i = 0; i <= parser->sp; i++) { |
| VG_(printf)(" [%ld] (level %d): ", i, parser->qlevel[i]); |
| ML_(pp_TyEnt)( &parser->qparentE[i] ); |
| VG_(printf)("\n"); |
| } |
| VG_(printf)(" }\n"); |
| } |
| |
| /* Remove from the stack, all entries with .level > 'level' */ |
| static |
| void typestack_preen ( D3TypeParser* parser, Bool td3, Int level ) |
| { |
| Bool changed = False; |
| vg_assert(parser->sp < N_D3_TYPE_STACK); |
| while (True) { |
| vg_assert(parser->sp >= -1); |
| if (parser->sp == -1) break; |
| if (parser->qlevel[parser->sp] <= level) break; |
| if (0) |
| TRACE_D3("BBBBAAAA typestack_pop [newsp=%d]\n", parser->sp-1); |
| vg_assert(ML_(TyEnt__is_type)(&parser->qparentE[parser->sp])); |
| VG_(memset)(&parser->qparentE[parser->sp], 0, sizeof(TyEnt)); |
| parser->qparentE[parser->sp].cuOff = D3_INVALID_CUOFF; |
| parser->qparentE[parser->sp].tag = Te_EMPTY; |
| parser->qlevel[parser->sp] = 0; |
| parser->sp--; |
| changed = True; |
| } |
| if (changed && td3) |
| typestack_show( parser, "after preen" ); |
| } |
| |
| static Bool typestack_is_empty ( D3TypeParser* parser ) { |
| vg_assert(parser->sp >= -1 && parser->sp < N_D3_TYPE_STACK); |
| return parser->sp == -1; |
| } |
| |
| static void typestack_push ( CUConst* cc, |
| D3TypeParser* parser, |
| Bool td3, |
| TyEnt* parentE, Int level ) { |
| if (0) |
| TRACE_D3("BBBBAAAA typestack_push[newsp=%d]: %d %05lx\n", |
| parser->sp+1, level, parentE->cuOff); |
| |
| /* First we need to zap everything >= 'level', as we are about to |
| replace any previous entry at 'level', so .. */ |
| typestack_preen(parser, /*td3*/False, level-1); |
| |
| vg_assert(parser->sp >= -1); |
| vg_assert(parser->sp < N_D3_TYPE_STACK); |
| if (parser->sp == N_D3_TYPE_STACK-1) |
| cc->barf("typestack_push: N_D3_TYPE_STACK is too low; " |
| "increase and recompile"); |
| if (parser->sp >= 0) |
| vg_assert(parser->qlevel[parser->sp] < level); |
| parser->sp++; |
| vg_assert(parser->qparentE[parser->sp].tag == Te_EMPTY); |
| vg_assert(parser->qlevel[parser->sp] == 0); |
| vg_assert(parentE); |
| vg_assert(ML_(TyEnt__is_type)(parentE)); |
| vg_assert(parentE->cuOff != D3_INVALID_CUOFF); |
| parser->qparentE[parser->sp] = *parentE; |
| parser->qlevel[parser->sp] = level; |
| if (td3) |
| typestack_show( parser, "after push" ); |
| } |
| |
| /* True if the subrange type being parsed gives the bounds of an array. */ |
| static Bool subrange_type_denotes_array_bounds ( D3TypeParser* parser, |
| DW_TAG dtag ) { |
| vg_assert(dtag == DW_TAG_subrange_type); |
| /* For most languages, a subrange_type dtag always gives the |
| bounds of an array. |
| For Ada, there are additional conditions as a subrange_type |
| is also used for other purposes. */ |
| if (parser->language != 'A') |
| /* not Ada, so it definitely denotes an array bound. */ |
| return True; |
| else |
| /* Extra constraints for Ada: it only denotes an array bound if .. */ |
| return (! typestack_is_empty(parser) |
| && parser->qparentE[parser->sp].tag == Te_TyArray); |
| } |
| |
| /* Parse a type-related DIE. 'parser' holds the current parser state. |
| 'admin' is where the completed types are dumped. 'dtag' is the tag |
| for this DIE. 'c_die' points to the start of the data fields (FORM |
| stuff) for the DIE. c_abbv points to the start of the (name,form) |
| pairs which describe the DIE. |
| |
| We may find the DIE uninteresting, in which case we should ignore |
| it. |
| |
| What happens: the DIE is examined. If uninteresting, it is ignored. |
| Otherwise, the DIE gives rise to two things: |
| |
| (1) the offset of this DIE in the CU -- the cuOffset, a UWord |
| (2) a TyAdmin structure, which holds the type, or related stuff |
| |
| (2) is added at the end of 'tyadmins', at some index, say 'i'. |
| |
| A pair (cuOffset, i) is added to 'tydict'. |
| |
| Hence 'tyadmins' holds the actual type entities, and 'tydict' holds |
| a mapping from cuOffset to the index of the corresponding entry in |
| 'tyadmin'. |
| |
| When resolving a cuOffset to a TyAdmin, first look up the cuOffset |
| in the tydict (by binary search). This gives an index into |
| tyadmins, and the required entity lives in tyadmins at that index. |
| */ |
| __attribute__((noinline)) |
| static void parse_type_DIE ( /*MOD*/XArray* /* of TyEnt */ tyents, |
| /*MOD*/D3TypeParser* parser, |
| DW_TAG dtag, |
| UWord posn, |
| Int level, |
| Cursor* c_die, |
| Cursor* c_abbv, |
| CUConst* cc, |
| Bool td3 ) |
| { |
| FormContents cts; |
| TyEnt typeE; |
| TyEnt atomE; |
| TyEnt fieldE; |
| TyEnt boundE; |
| Bool debug_types_flag; |
| Bool alt_flag; |
| |
| UWord saved_die_c_offset = get_position_of_Cursor( c_die ); |
| UWord saved_abbv_c_offset = get_position_of_Cursor( c_abbv ); |
| |
| VG_(memset)( &typeE, 0xAA, sizeof(typeE) ); |
| VG_(memset)( &atomE, 0xAA, sizeof(atomE) ); |
| VG_(memset)( &fieldE, 0xAA, sizeof(fieldE) ); |
| VG_(memset)( &boundE, 0xAA, sizeof(boundE) ); |
| |
| /* If we've returned to a level at or above any previously noted |
| parent, un-note it, so we don't believe we're still collecting |
| its children. */ |
| typestack_preen( parser, td3, level-1 ); |
| |
| if (dtag == DW_TAG_compile_unit |
| || dtag == DW_TAG_type_unit |
| || dtag == DW_TAG_partial_unit) { |
| /* See if we can find DW_AT_language, since it is important for |
| establishing array bounds (see DW_TAG_subrange_type below in |
| this fn) */ |
| while (True) { |
| DW_AT attr = (DW_AT) get_ULEB128( c_abbv ); |
| DW_FORM form = (DW_FORM)get_ULEB128( c_abbv ); |
| if (attr == 0 && form == 0) break; |
| get_Form_contents( &cts, cc, c_die, False/*td3*/, form ); |
| if (attr != DW_AT_language) |
| continue; |
| if (cts.szB <= 0) |
| goto_bad_DIE; |
| switch (cts.u.val) { |
| case DW_LANG_C89: case DW_LANG_C: |
| case DW_LANG_C_plus_plus: case DW_LANG_ObjC: |
| case DW_LANG_ObjC_plus_plus: case DW_LANG_UPC: |
| case DW_LANG_Upc: case DW_LANG_C99: |
| parser->language = 'C'; break; |
| case DW_LANG_Fortran77: case DW_LANG_Fortran90: |
| case DW_LANG_Fortran95: |
| parser->language = 'F'; break; |
| case DW_LANG_Ada83: case DW_LANG_Ada95: |
| parser->language = 'A'; break; |
| case DW_LANG_Cobol74: |
| case DW_LANG_Cobol85: case DW_LANG_Pascal83: |
| case DW_LANG_Modula2: case DW_LANG_Java: |
| case DW_LANG_PLI: |
| case DW_LANG_D: case DW_LANG_Python: |
| case DW_LANG_Mips_Assembler: |
| parser->language = '?'; break; |
| default: |
| goto_bad_DIE; |
| } |
| } |
| } |
| |
| if (dtag == DW_TAG_base_type) { |
| /* We can pick up a new base type any time. */ |
| VG_(memset)(&typeE, 0, sizeof(typeE)); |
| typeE.cuOff = D3_INVALID_CUOFF; |
| typeE.tag = Te_TyBase; |
| while (True) { |
| DW_AT attr = (DW_AT) get_ULEB128( c_abbv ); |
| DW_FORM form = (DW_FORM)get_ULEB128( c_abbv ); |
| if (attr == 0 && form == 0) break; |
| get_Form_contents( &cts, cc, c_die, False/*td3*/, form ); |
| if (attr == DW_AT_name && cts.szB < 0) { |
| typeE.Te.TyBase.name |
| = ML_(cur_read_strdup)( cts.u.cur, |
| "di.readdwarf3.ptD.base_type.1" ); |
| } |
| if (attr == DW_AT_byte_size && cts.szB > 0) { |
| typeE.Te.TyBase.szB = cts.u.val; |
| } |
| if (attr == DW_AT_encoding && cts.szB > 0) { |
| switch (cts.u.val) { |
| case DW_ATE_unsigned: case DW_ATE_unsigned_char: |
| case DW_ATE_UTF: /* since DWARF4, e.g. char16_t from C++ */ |
| case DW_ATE_boolean:/* FIXME - is this correct? */ |
| case DW_ATE_unsigned_fixed: |
| typeE.Te.TyBase.enc = 'U'; break; |
| case DW_ATE_signed: case DW_ATE_signed_char: |
| case DW_ATE_signed_fixed: |
| typeE.Te.TyBase.enc = 'S'; break; |
| case DW_ATE_float: |
| typeE.Te.TyBase.enc = 'F'; break; |
| case DW_ATE_complex_float: |
| typeE.Te.TyBase.enc = 'C'; break; |
| default: |
| goto_bad_DIE; |
| } |
| } |
| } |
| |
| /* Invent a name if it doesn't have one. gcc-4.3 |
| -ftree-vectorize is observed to emit nameless base types. */ |
| if (!typeE.Te.TyBase.name) |
| typeE.Te.TyBase.name |
| = ML_(dinfo_strdup)( "di.readdwarf3.ptD.base_type.2", |
| "<anon_base_type>" ); |
| |
| /* Do we have something that looks sane? */ |
| if (/* must have a name */ |
| typeE.Te.TyBase.name == NULL |
| /* and a plausible size. Yes, really 32: "complex long |
| double" apparently has size=32 */ |
| || typeE.Te.TyBase.szB < 0 || typeE.Te.TyBase.szB > 32 |
| /* and a plausible encoding */ |
| || (typeE.Te.TyBase.enc != 'U' |
| && typeE.Te.TyBase.enc != 'S' |
| && typeE.Te.TyBase.enc != 'F' |
| && typeE.Te.TyBase.enc != 'C')) |
| goto_bad_DIE; |
| /* Last minute hack: if we see this |
| <1><515>: DW_TAG_base_type |
| DW_AT_byte_size : 0 |
| DW_AT_encoding : 5 |
| DW_AT_name : void |
| convert it into a real Void type. */ |
| if (typeE.Te.TyBase.szB == 0 |
| && 0 == VG_(strcmp)("void", typeE.Te.TyBase.name)) { |
| ML_(TyEnt__make_EMPTY)(&typeE); |
| typeE.tag = Te_TyVoid; |
| typeE.Te.TyVoid.isFake = False; /* it's a real one! */ |
| } |
| |
| goto acquire_Type; |
| } |
| |
| /* |
| * An example of DW_TAG_rvalue_reference_type: |
| * |
| * $ readelf --debug-dump /usr/lib/debug/usr/lib/libstdc++.so.6.0.16.debug |
| * <1><1014>: Abbrev Number: 55 (DW_TAG_rvalue_reference_type) |
| * <1015> DW_AT_byte_size : 4 |
| * <1016> DW_AT_type : <0xe52> |
| */ |
| if (dtag == DW_TAG_pointer_type || dtag == DW_TAG_reference_type |
| || dtag == DW_TAG_ptr_to_member_type |
| || dtag == DW_TAG_rvalue_reference_type) { |
| /* This seems legit for _pointer_type and _reference_type. I |
| don't know if rolling _ptr_to_member_type in here really is |
| legit, but it's better than not handling it at all. */ |
| VG_(memset)(&typeE, 0, sizeof(typeE)); |
| typeE.cuOff = D3_INVALID_CUOFF; |
| switch (dtag) { |
| case DW_TAG_pointer_type: |
| typeE.tag = Te_TyPtr; |
| break; |
| case DW_TAG_reference_type: |
| typeE.tag = Te_TyRef; |
| break; |
| case DW_TAG_ptr_to_member_type: |
| typeE.tag = Te_TyPtrMbr; |
| break; |
| case DW_TAG_rvalue_reference_type: |
| typeE.tag = Te_TyRvalRef; |
| break; |
| default: |
| vg_assert(False); |
| } |
| /* target type defaults to void */ |
| typeE.Te.TyPorR.typeR = D3_FAKEVOID_CUOFF; |
| /* These four type kinds don't *have* to specify their size, in |
| which case we assume it's a machine word. But if they do |
| specify it, it must be a machine word :-) This probably |
| assumes that the word size of the Dwarf3 we're reading is the |
| same size as that on the machine. gcc appears to give a size |
| whereas icc9 doesn't. */ |
| typeE.Te.TyPorR.szB = sizeof(UWord); |
| while (True) { |
| DW_AT attr = (DW_AT) get_ULEB128( c_abbv ); |
| DW_FORM form = (DW_FORM)get_ULEB128( c_abbv ); |
| if (attr == 0 && form == 0) break; |
| get_Form_contents( &cts, cc, c_die, False/*td3*/, form ); |
| if (attr == DW_AT_byte_size && cts.szB > 0) { |
| typeE.Te.TyPorR.szB = cts.u.val; |
| } |
| if (attr == DW_AT_type && cts.szB > 0) { |
| typeE.Te.TyPorR.typeR |
| = cook_die_using_form( cc, (UWord)cts.u.val, form ); |
| } |
| } |
| /* Do we have something that looks sane? */ |
| if (typeE.Te.TyPorR.szB != sizeof(UWord)) |
| goto_bad_DIE; |
| else |
| goto acquire_Type; |
| } |
| |
| if (dtag == DW_TAG_enumeration_type) { |
| /* Create a new Type to hold the results. */ |
| VG_(memset)(&typeE, 0, sizeof(typeE)); |
| typeE.cuOff = posn; |
| typeE.tag = Te_TyEnum; |
| Bool is_decl = False; |
| typeE.Te.TyEnum.atomRs |
| = VG_(newXA)( ML_(dinfo_zalloc), "di.readdwarf3.ptD.enum_type.1", |
| ML_(dinfo_free), |
| sizeof(UWord) ); |
| while (True) { |
| DW_AT attr = (DW_AT) get_ULEB128( c_abbv ); |
| DW_FORM form = (DW_FORM)get_ULEB128( c_abbv ); |
| if (attr == 0 && form == 0) break; |
| get_Form_contents( &cts, cc, c_die, False/*td3*/, form ); |
| if (attr == DW_AT_name && cts.szB < 0) { |
| typeE.Te.TyEnum.name |
| = ML_(cur_read_strdup)( cts.u.cur, |
| "di.readdwarf3.pTD.enum_type.2" ); |
| } |
| if (attr == DW_AT_byte_size && cts.szB > 0) { |
| typeE.Te.TyEnum.szB = cts.u.val; |
| } |
| if (attr == DW_AT_declaration) { |
| is_decl = True; |
| } |
| } |
| |
| if (!typeE.Te.TyEnum.name) |
| typeE.Te.TyEnum.name |
| = ML_(dinfo_strdup)( "di.readdwarf3.pTD.enum_type.3", |
| "<anon_enum_type>" ); |
| |
| /* Do we have something that looks sane? */ |
| if (typeE.Te.TyEnum.szB == 0 |
| /* we must know the size */ |
| /* but not for Ada, which uses such dummy |
| enumerations as helper for gdb ada mode. |
| Also GCC allows incomplete enums as GNU extension. |
| http://gcc.gnu.org/onlinedocs/gcc/Incomplete-Enums.html |
| These are marked as DW_AT_declaration and won't have |
| a size. They can only be used in declaration or as |
| pointer types. You can't allocate variables or storage |
| using such an enum type. (Also GCC seems to have a bug |
| that will put such an enumeration_type into a .debug_types |
| unit which should only contain complete types.) */ |
| && (parser->language != 'A' && !is_decl)) { |
| goto_bad_DIE; |
| } |
| |
| /* On't stack! */ |
| typestack_push( cc, parser, td3, &typeE, level ); |
| goto acquire_Type; |
| } |
| |
| /* gcc (GCC) 4.4.0 20081017 (experimental) occasionally produces |
| DW_TAG_enumerator with only a DW_AT_name but no |
| DW_AT_const_value. This is in violation of the Dwarf3 standard, |
| and appears to be a new "feature" of gcc - versions 4.3.x and |
| earlier do not appear to do this. So accept DW_TAG_enumerator |
| which only have a name but no value. An example: |
| |
| <1><180>: Abbrev Number: 6 (DW_TAG_enumeration_type) |
| <181> DW_AT_name : (indirect string, offset: 0xda70): |
| QtMsgType |
| <185> DW_AT_byte_size : 4 |
| <186> DW_AT_decl_file : 14 |
| <187> DW_AT_decl_line : 1480 |
| <189> DW_AT_sibling : <0x1a7> |
| <2><18d>: Abbrev Number: 7 (DW_TAG_enumerator) |
| <18e> DW_AT_name : (indirect string, offset: 0x9e18): |
| QtDebugMsg |
| <2><192>: Abbrev Number: 7 (DW_TAG_enumerator) |
| <193> DW_AT_name : (indirect string, offset: 0x1505f): |
| QtWarningMsg |
| <2><197>: Abbrev Number: 7 (DW_TAG_enumerator) |
| <198> DW_AT_name : (indirect string, offset: 0x16f4a): |
| QtCriticalMsg |
| <2><19c>: Abbrev Number: 7 (DW_TAG_enumerator) |
| <19d> DW_AT_name : (indirect string, offset: 0x156dd): |
| QtFatalMsg |
| <2><1a1>: Abbrev Number: 7 (DW_TAG_enumerator) |
| <1a2> DW_AT_name : (indirect string, offset: 0x13660): |
| QtSystemMsg |
| */ |
| if (dtag == DW_TAG_enumerator) { |
| VG_(memset)( &atomE, 0, sizeof(atomE) ); |
| atomE.cuOff = posn; |
| atomE.tag = Te_Atom; |
| while (True) { |
| DW_AT attr = (DW_AT) get_ULEB128( c_abbv ); |
| DW_FORM form = (DW_FORM)get_ULEB128( c_abbv ); |
| if (attr == 0 && form == 0) break; |
| get_Form_contents( &cts, cc, c_die, False/*td3*/, form ); |
| if (attr == DW_AT_name && cts.szB < 0) { |
| atomE.Te.Atom.name |
| = ML_(cur_read_strdup)( cts.u.cur, |
| "di.readdwarf3.pTD.enumerator.1" ); |
| } |
| if (attr == DW_AT_const_value && cts.szB > 0) { |
| atomE.Te.Atom.value = cts.u.val; |
| atomE.Te.Atom.valueKnown = True; |
| } |
| } |
| /* Do we have something that looks sane? */ |
| if (atomE.Te.Atom.name == NULL) |
| goto_bad_DIE; |
| /* Do we have a plausible parent? */ |
| if (typestack_is_empty(parser)) goto_bad_DIE; |
| vg_assert(ML_(TyEnt__is_type)(&parser->qparentE[parser->sp])); |
| vg_assert(parser->qparentE[parser->sp].cuOff != D3_INVALID_CUOFF); |
| if (level != parser->qlevel[parser->sp]+1) goto_bad_DIE; |
| if (parser->qparentE[parser->sp].tag != Te_TyEnum) goto_bad_DIE; |
| /* Record this child in the parent */ |
| vg_assert(parser->qparentE[parser->sp].Te.TyEnum.atomRs); |
| VG_(addToXA)( parser->qparentE[parser->sp].Te.TyEnum.atomRs, |
| &atomE ); |
| /* And record the child itself */ |
| goto acquire_Atom; |
| } |
| |
| /* Treat DW_TAG_class_type as if it was a DW_TAG_structure_type. I |
| don't know if this is correct, but it at least makes this reader |
| usable for gcc-4.3 produced Dwarf3. */ |
| if (dtag == DW_TAG_structure_type || dtag == DW_TAG_class_type |
| || dtag == DW_TAG_union_type) { |
| Bool have_szB = False; |
| Bool is_decl = False; |
| Bool is_spec = False; |
| /* Create a new Type to hold the results. */ |
| VG_(memset)(&typeE, 0, sizeof(typeE)); |
| typeE.cuOff = posn; |
| typeE.tag = Te_TyStOrUn; |
| typeE.Te.TyStOrUn.name = NULL; |
| typeE.Te.TyStOrUn.typeR = D3_INVALID_CUOFF; |
| typeE.Te.TyStOrUn.fieldRs |
| = VG_(newXA)( ML_(dinfo_zalloc), "di.readdwarf3.pTD.struct_type.1", |
| ML_(dinfo_free), |
| sizeof(UWord) ); |
| typeE.Te.TyStOrUn.complete = True; |
| typeE.Te.TyStOrUn.isStruct = dtag == DW_TAG_structure_type |
| || dtag == DW_TAG_class_type; |
| while (True) { |
| DW_AT attr = (DW_AT) get_ULEB128( c_abbv ); |
| DW_FORM form = (DW_FORM)get_ULEB128( c_abbv ); |
| if (attr == 0 && form == 0) break; |
| get_Form_contents( &cts, cc, c_die, False/*td3*/, form ); |
| if (attr == DW_AT_name && cts.szB < 0) { |
| typeE.Te.TyStOrUn.name |
| = ML_(cur_read_strdup)( cts.u.cur, |
| "di.readdwarf3.ptD.struct_type.2" ); |
| } |
| if (attr == DW_AT_byte_size && cts.szB >= 0) { |
| typeE.Te.TyStOrUn.szB = cts.u.val; |
| have_szB = True; |
| } |
| if (attr == DW_AT_declaration && cts.szB > 0 && cts.u.val > 0) { |
| is_decl = True; |
| } |
| if (attr == DW_AT_specification && cts.szB > 0 && cts.u.val > 0) { |
| is_spec = True; |
| } |
| if (attr == DW_AT_signature && form == DW_FORM_ref_sig8 |
| && cts.szB > 0) { |
| have_szB = True; |
| typeE.Te.TyStOrUn.szB = 8; |
| typeE.Te.TyStOrUn.typeR |
| = cook_die_using_form( cc, (UWord)cts.u.val, form ); |
| } |
| } |
| /* Do we have something that looks sane? */ |
| if (is_decl && (!is_spec)) { |
| /* It's a DW_AT_declaration. We require the name but |
| nothing else. */ |
| /* JRS 2012-06-28: following discussion w/ tromey, if the the |
| type doesn't have name, just make one up, and accept it. |
| It might be referred to by other DIEs, so ignoring it |
| doesn't seem like a safe option. */ |
| if (typeE.Te.TyStOrUn.name == NULL) |
| typeE.Te.TyStOrUn.name |
| = ML_(dinfo_strdup)( "di.readdwarf3.ptD.struct_type.3", |
| "<anon_struct_type>" ); |
| typeE.Te.TyStOrUn.complete = False; |
| /* JRS 2009 Aug 10: <possible kludge>? */ |
| /* Push this tyent on the stack, even though it's incomplete. |
| It appears that gcc-4.4 on Fedora 11 will sometimes create |
| DW_TAG_member entries for it, and so we need to have a |
| plausible parent present in order for that to work. See |
| #200029 comments 8 and 9. */ |
| typestack_push( cc, parser, td3, &typeE, level ); |
| /* </possible kludge> */ |
| goto acquire_Type; |
| } |
| if ((!is_decl) /* && (!is_spec) */) { |
| /* this is the common, ordinary case */ |
| /* The name can be present, or not */ |
| if (!have_szB) { |
| /* We must know the size. |
| But in Ada, record with discriminants might have no size. |
| But in C, VLA in the middle of a struct (gcc extension) |
| might have no size. |
| Instead, some GNAT dwarf extensions and/or dwarf entries |
| allow to calculate the struct size at runtime. |
| We cannot do that (yet?) so, the temporary kludge is to use |
| a small size. */ |
| typeE.Te.TyStOrUn.szB = 1; |
| } |
| /* On't stack! */ |
| typestack_push( cc, parser, td3, &typeE, level ); |
| goto acquire_Type; |
| } |
| else { |
| /* don't know how to handle any other variants just now */ |
| goto_bad_DIE; |
| } |
| } |
| |
| if (dtag == DW_TAG_member) { |
| /* Acquire member entries for both DW_TAG_structure_type and |
| DW_TAG_union_type. They differ minorly, in that struct |
| members must have a DW_AT_data_member_location expression |
| whereas union members must not. */ |
| Bool parent_is_struct; |
| VG_(memset)( &fieldE, 0, sizeof(fieldE) ); |
| fieldE.cuOff = posn; |
| fieldE.tag = Te_Field; |
| fieldE.Te.Field.typeR = D3_INVALID_CUOFF; |
| while (True) { |
| DW_AT attr = (DW_AT) get_ULEB128( c_abbv ); |
| DW_FORM form = (DW_FORM)get_ULEB128( c_abbv ); |
| if (attr == 0 && form == 0) break; |
| get_Form_contents( &cts, cc, c_die, False/*td3*/, form ); |
| if (attr == DW_AT_name && cts.szB < 0) { |
| fieldE.Te.Field.name |
| = ML_(cur_read_strdup)( cts.u.cur, |
| "di.readdwarf3.ptD.member.1" ); |
| } |
| if (attr == DW_AT_type && cts.szB > 0) { |
| fieldE.Te.Field.typeR |
| = cook_die_using_form( cc, (UWord)cts.u.val, form ); |
| } |
| /* There are 2 different cases for DW_AT_data_member_location. |
| If it is a constant class attribute, it contains byte offset |
| from the beginning of the containing entity. |
| Otherwise it is a location expression. */ |
| if (attr == DW_AT_data_member_location && cts.szB > 0) { |
| fieldE.Te.Field.nLoc = -1; |
| fieldE.Te.Field.pos.offset = cts.u.val; |
| } |
| if (attr == DW_AT_data_member_location && cts.szB <= 0) { |
| fieldE.Te.Field.nLoc = (UWord)(-cts.szB); |
| fieldE.Te.Field.pos.loc |
| = ML_(cur_read_memdup)( cts.u.cur, |
| (SizeT)fieldE.Te.Field.nLoc, |
| "di.readdwarf3.ptD.member.2" ); |
| } |
| } |
| /* Do we have a plausible parent? */ |
| if (typestack_is_empty(parser)) goto_bad_DIE; |
| vg_assert(ML_(TyEnt__is_type)(&parser->qparentE[parser->sp])); |
| vg_assert(parser->qparentE[parser->sp].cuOff != D3_INVALID_CUOFF); |
| if (level != parser->qlevel[parser->sp]+1) goto_bad_DIE; |
| if (parser->qparentE[parser->sp].tag != Te_TyStOrUn) goto_bad_DIE; |
| /* Do we have something that looks sane? If this a member of a |
| struct, we must have a location expression; but if a member |
| of a union that is irrelevant (D3 spec sec 5.6.6). We ought |
| to reject in the latter case, but some compilers have been |
| observed to emit constant-zero expressions. So just ignore |
| them. */ |
| parent_is_struct |
| = parser->qparentE[parser->sp].Te.TyStOrUn.isStruct; |
| if (!fieldE.Te.Field.name) |
| fieldE.Te.Field.name |
| = ML_(dinfo_strdup)( "di.readdwarf3.ptD.member.3", |
| "<anon_field>" ); |
| vg_assert(fieldE.Te.Field.name); |
| if (fieldE.Te.Field.typeR == D3_INVALID_CUOFF) |
| goto_bad_DIE; |
| if (fieldE.Te.Field.nLoc) { |
| if (!parent_is_struct) { |
| /* If this is a union type, pretend we haven't seen the data |
| member location expression, as it is by definition |
| redundant (it must be zero). */ |
| if (fieldE.Te.Field.nLoc > 0) |
| ML_(dinfo_free)(fieldE.Te.Field.pos.loc); |
| fieldE.Te.Field.pos.loc = NULL; |
| fieldE.Te.Field.nLoc = 0; |
| } |
| /* Record this child in the parent */ |
| fieldE.Te.Field.isStruct = parent_is_struct; |
| vg_assert(parser->qparentE[parser->sp].Te.TyStOrUn.fieldRs); |
| VG_(addToXA)( parser->qparentE[parser->sp].Te.TyStOrUn.fieldRs, |
| &posn ); |
| /* And record the child itself */ |
| goto acquire_Field; |
| } else { |
| /* Member with no location - this can happen with static |
| const members in C++ code which are compile time constants |
| that do no exist in the class. They're not of any interest |
| to us so we ignore them. */ |
| ML_(TyEnt__make_EMPTY)(&fieldE); |
| } |
| } |
| |
| if (dtag == DW_TAG_array_type) { |
| VG_(memset)(&typeE, 0, sizeof(typeE)); |
| typeE.cuOff = posn; |
| typeE.tag = Te_TyArray; |
| typeE.Te.TyArray.typeR = D3_INVALID_CUOFF; |
| typeE.Te.TyArray.boundRs |
| = VG_(newXA)( ML_(dinfo_zalloc), "di.readdwarf3.ptD.array_type.1", |
| ML_(dinfo_free), |
| sizeof(UWord) ); |
| while (True) { |
| DW_AT attr = (DW_AT) get_ULEB128( c_abbv ); |
| DW_FORM form = (DW_FORM)get_ULEB128( c_abbv ); |
| if (attr == 0 && form == 0) break; |
| get_Form_contents( &cts, cc, c_die, False/*td3*/, form ); |
| if (attr == DW_AT_type && cts.szB > 0) { |
| typeE.Te.TyArray.typeR |
| = cook_die_using_form( cc, (UWord)cts.u.val, form ); |
| } |
| } |
| if (typeE.Te.TyArray.typeR == D3_INVALID_CUOFF) |
| goto_bad_DIE; |
| /* On't stack! */ |
| typestack_push( cc, parser, td3, &typeE, level ); |
| goto acquire_Type; |
| } |
| |
| /* this is a subrange type defining the bounds of an array. */ |
| if (dtag == DW_TAG_subrange_type |
| && subrange_type_denotes_array_bounds(parser, dtag)) { |
| Bool have_lower = False; |
| Bool have_upper = False; |
| Bool have_count = False; |
| Long lower = 0; |
| Long upper = 0; |
| |
| switch (parser->language) { |
| case 'C': have_lower = True; lower = 0; break; |
| case 'F': have_lower = True; lower = 1; break; |
| case '?': have_lower = False; break; |
| case 'A': have_lower = False; break; |
| default: vg_assert(0); /* assured us by handling of |
| DW_TAG_compile_unit in this fn */ |
| } |
| |
| VG_(memset)( &boundE, 0, sizeof(boundE) ); |
| boundE.cuOff = D3_INVALID_CUOFF; |
| boundE.tag = Te_Bound; |
| while (True) { |
| DW_AT attr = (DW_AT) get_ULEB128( c_abbv ); |
| DW_FORM form = (DW_FORM)get_ULEB128( c_abbv ); |
| if (attr == 0 && form == 0) break; |
| get_Form_contents( &cts, cc, c_die, False/*td3*/, form ); |
| if (attr == DW_AT_lower_bound && cts.szB > 0) { |
| lower = (Long)cts.u.val; |
| have_lower = True; |
| } |
| if (attr == DW_AT_upper_bound && cts.szB > 0) { |
| upper = (Long)cts.u.val; |
| have_upper = True; |
| } |
| if (attr == DW_AT_count && cts.szB > 0) { |
| /*count = (Long)cts.u.val;*/ |
| have_count = True; |
| } |
| } |
| /* FIXME: potentially skip the rest if no parent present, since |
| it could be the case that this subrange type is free-standing |
| (not being used to describe the bounds of a containing array |
| type) */ |
| /* Do we have a plausible parent? */ |
| if (typestack_is_empty(parser)) goto_bad_DIE; |
| vg_assert(ML_(TyEnt__is_type)(&parser->qparentE[parser->sp])); |
| vg_assert(parser->qparentE[parser->sp].cuOff != D3_INVALID_CUOFF); |
| if (level != parser->qlevel[parser->sp]+1) goto_bad_DIE; |
| if (parser->qparentE[parser->sp].tag != Te_TyArray) goto_bad_DIE; |
| |
| /* Figure out if we have a definite range or not */ |
| if (have_lower && have_upper && (!have_count)) { |
| boundE.Te.Bound.knownL = True; |
| boundE.Te.Bound.knownU = True; |
| boundE.Te.Bound.boundL = lower; |
| boundE.Te.Bound.boundU = upper; |
| } |
| else if (have_lower && (!have_upper) && (!have_count)) { |
| boundE.Te.Bound.knownL = True; |
| boundE.Te.Bound.knownU = False; |
| boundE.Te.Bound.boundL = lower; |
| boundE.Te.Bound.boundU = 0; |
| } |
| else if ((!have_lower) && have_upper && (!have_count)) { |
| boundE.Te.Bound.knownL = False; |
| boundE.Te.Bound.knownU = True; |
| boundE.Te.Bound.boundL = 0; |
| boundE.Te.Bound.boundU = upper; |
| } |
| else if ((!have_lower) && (!have_upper) && (!have_count)) { |
| boundE.Te.Bound.knownL = False; |
| boundE.Te.Bound.knownU = False; |
| boundE.Te.Bound.boundL = 0; |
| boundE.Te.Bound.boundU = 0; |
| } else { |
| /* FIXME: handle more cases */ |
| goto_bad_DIE; |
| } |
| |
| /* Record this bound in the parent */ |
| boundE.cuOff = posn; |
| vg_assert(parser->qparentE[parser->sp].Te.TyArray.boundRs); |
| VG_(addToXA)( parser->qparentE[parser->sp].Te.TyArray.boundRs, |
| &boundE.cuOff ); |
| /* And record the child itself */ |
| goto acquire_Bound; |
| } |
| |
| /* typedef or subrange_type other than array bounds. */ |
| if (dtag == DW_TAG_typedef |
| || (dtag == DW_TAG_subrange_type |
| && !subrange_type_denotes_array_bounds(parser, dtag))) { |
| /* subrange_type other than array bound is only for Ada. */ |
| vg_assert (dtag == DW_TAG_typedef || parser->language == 'A'); |
| /* We can pick up a new typedef/subrange_type any time. */ |
| VG_(memset)(&typeE, 0, sizeof(typeE)); |
| typeE.cuOff = D3_INVALID_CUOFF; |
| typeE.tag = Te_TyTyDef; |
| typeE.Te.TyTyDef.name = NULL; |
| typeE.Te.TyTyDef.typeR = D3_INVALID_CUOFF; |
| while (True) { |
| DW_AT attr = (DW_AT) get_ULEB128( c_abbv ); |
| DW_FORM form = (DW_FORM)get_ULEB128( c_abbv ); |
| if (attr == 0 && form == 0) break; |
| get_Form_contents( &cts, cc, c_die, False/*td3*/, form ); |
| if (attr == DW_AT_name && cts.szB < 0) { |
| typeE.Te.TyTyDef.name |
| = ML_(cur_read_strdup)( cts.u.cur, |
| "di.readdwarf3.ptD.typedef.1" ); |
| } |
| if (attr == DW_AT_type && cts.szB > 0) { |
| typeE.Te.TyTyDef.typeR |
| = cook_die_using_form( cc, (UWord)cts.u.val, form ); |
| } |
| } |
| /* Do we have something that looks sane? |
| gcc gnat Ada generates minimal typedef |
| such as the below |
| <6><91cc>: DW_TAG_typedef |
| DW_AT_abstract_ori: <9066> |
| g++ for OMP can generate artificial functions that have |
| parameters that refer to pointers to unnamed typedefs. |
| See https://bugs.kde.org/show_bug.cgi?id=273475 |
| So we cannot require a name for a DW_TAG_typedef. |
| */ |
| goto acquire_Type; |
| } |
| |
| if (dtag == DW_TAG_subroutine_type) { |
| /* function type? just record that one fact and ask no |
| further questions. */ |
| VG_(memset)(&typeE, 0, sizeof(typeE)); |
| typeE.cuOff = D3_INVALID_CUOFF; |
| typeE.tag = Te_TyFn; |
| goto acquire_Type; |
| } |
| |
| if (dtag == DW_TAG_volatile_type || dtag == DW_TAG_const_type) { |
| Int have_ty = 0; |
| VG_(memset)(&typeE, 0, sizeof(typeE)); |
| typeE.cuOff = D3_INVALID_CUOFF; |
| typeE.tag = Te_TyQual; |
| typeE.Te.TyQual.qual |
| = dtag == DW_TAG_volatile_type ? 'V' : 'C'; |
| /* target type defaults to 'void' */ |
| typeE.Te.TyQual.typeR = D3_FAKEVOID_CUOFF; |
| while (True) { |
| DW_AT attr = (DW_AT) get_ULEB128( c_abbv ); |
| DW_FORM form = (DW_FORM)get_ULEB128( c_abbv ); |
| if (attr == 0 && form == 0) break; |
| get_Form_contents( &cts, cc, c_die, False/*td3*/, form ); |
| if (attr == DW_AT_type && cts.szB > 0) { |
| typeE.Te.TyQual.typeR |
| = cook_die_using_form( cc, (UWord)cts.u.val, form ); |
| have_ty++; |
| } |
| } |
| /* gcc sometimes generates DW_TAG_const/volatile_type without |
| DW_AT_type and GDB appears to interpret the type as 'const |
| void' (resp. 'volatile void'). So just allow it .. */ |
| if (have_ty == 1 || have_ty == 0) |
| goto acquire_Type; |
| else |
| goto_bad_DIE; |
| } |
| |
| /* |
| * Treat DW_TAG_unspecified_type as type void. An example of DW_TAG_unspecified_type: |
| * |
| * $ readelf --debug-dump /usr/lib/debug/usr/lib/libstdc++.so.6.0.16.debug |
| * <1><10d4>: Abbrev Number: 53 (DW_TAG_unspecified_type) |
| * <10d5> DW_AT_name : (indirect string, offset: 0xdb7): decltype(nullptr) |
| */ |
| if (dtag == DW_TAG_unspecified_type) { |
| VG_(memset)(&typeE, 0, sizeof(typeE)); |
| typeE.cuOff = D3_INVALID_CUOFF; |
| typeE.tag = Te_TyQual; |
| typeE.Te.TyQual.typeR = D3_FAKEVOID_CUOFF; |
| goto acquire_Type; |
| } |
| |
| /* else ignore this DIE */ |
| return; |
| /*NOTREACHED*/ |
| |
| acquire_Type: |
| if (0) VG_(printf)("YYYY Acquire Type\n"); |
| vg_assert(ML_(TyEnt__is_type)( &typeE )); |
| vg_assert(typeE.cuOff == D3_INVALID_CUOFF || typeE.cuOff == posn); |
| typeE.cuOff = posn; |
| VG_(addToXA)( tyents, &typeE ); |
| return; |
| /*NOTREACHED*/ |
| |
| acquire_Atom: |
| if (0) VG_(printf)("YYYY Acquire Atom\n"); |
| vg_assert(atomE.tag == Te_Atom); |
| vg_assert(atomE.cuOff == D3_INVALID_CUOFF || atomE.cuOff == posn); |
| atomE.cuOff = posn; |
| VG_(addToXA)( tyents, &atomE ); |
| return; |
| /*NOTREACHED*/ |
| |
| acquire_Field: |
| /* For union members, Expr should be absent */ |
| if (0) VG_(printf)("YYYY Acquire Field\n"); |
| vg_assert(fieldE.tag == Te_Field); |
| vg_assert(fieldE.Te.Field.nLoc <= 0 || fieldE.Te.Field.pos.loc != NULL); |
| vg_assert(fieldE.Te.Field.nLoc != 0 || fieldE.Te.Field.pos.loc == NULL); |
| if (fieldE.Te.Field.isStruct) { |
| vg_assert(fieldE.Te.Field.nLoc != 0); |
| } else { |
| vg_assert(fieldE.Te.Field.nLoc == 0); |
| } |
| vg_assert(fieldE.cuOff == D3_INVALID_CUOFF || fieldE.cuOff == posn); |
| fieldE.cuOff = posn; |
| VG_(addToXA)( tyents, &fieldE ); |
| return; |
| /*NOTREACHED*/ |
| |
| acquire_Bound: |
| if (0) VG_(printf)("YYYY Acquire Bound\n"); |
| vg_assert(boundE.tag == Te_Bound); |
| vg_assert(boundE.cuOff == D3_INVALID_CUOFF || boundE.cuOff == posn); |
| boundE.cuOff = posn; |
| VG_(addToXA)( tyents, &boundE ); |
| return; |
| /*NOTREACHED*/ |
| |
| bad_DIE: |
| set_position_of_Cursor( c_die, saved_die_c_offset ); |
| set_position_of_Cursor( c_abbv, saved_abbv_c_offset ); |
| posn = uncook_die( cc, posn, &debug_types_flag, &alt_flag ); |
| VG_(printf)(" <%d><%lx>: %s", level, posn, ML_(pp_DW_TAG)( dtag ) ); |
| if (debug_types_flag) { |
| VG_(printf)(" (in .debug_types)"); |
| } else if (alt_flag) { |
| VG_(printf)(" (in alternate .debug_info)"); |
| } |
| VG_(printf)("\n"); |
| while (True) { |
| DW_AT attr = (DW_AT) get_ULEB128( c_abbv ); |
| DW_FORM form = (DW_FORM)get_ULEB128( c_abbv ); |
| if (attr == 0 && form == 0) break; |
| VG_(printf)(" %18s: ", ML_(pp_DW_AT)(attr)); |
| /* Get the form contents, so as to print them */ |
| get_Form_contents( &cts, cc, c_die, True, form ); |
| VG_(printf)("\t\n"); |
| } |
| VG_(printf)("\n"); |
| cc->barf("parse_type_DIE: confused by the above DIE"); |
| /*NOTREACHED*/ |
| } |
| |
| |
| /*------------------------------------------------------------*/ |
| /*--- ---*/ |
| /*--- Compression of type DIE information ---*/ |
| /*--- ---*/ |
| /*------------------------------------------------------------*/ |
| |
| static UWord chase_cuOff ( Bool* changed, |
| XArray* /* of TyEnt */ ents, |
| TyEntIndexCache* ents_cache, |
| UWord cuOff ) |
| { |
| TyEnt* ent; |
| ent = ML_(TyEnts__index_by_cuOff)( ents, ents_cache, cuOff ); |
| |
| if (!ent) { |
| VG_(printf)("chase_cuOff: no entry for 0x%05lx\n", cuOff); |
| *changed = False; |
| return cuOff; |
| } |
| |
| vg_assert(ent->tag != Te_EMPTY); |
| if (ent->tag != Te_INDIR) { |
| *changed = False; |
| return cuOff; |
| } else { |
| vg_assert(ent->Te.INDIR.indR < cuOff); |
| *changed = True; |
| return ent->Te.INDIR.indR; |
| } |
| } |
| |
| static |
| void chase_cuOffs_in_XArray ( Bool* changed, |
| XArray* /* of TyEnt */ ents, |
| TyEntIndexCache* ents_cache, |
| /*MOD*/XArray* /* of UWord */ cuOffs ) |
| { |
| Bool b2 = False; |
| Word i, n = VG_(sizeXA)( cuOffs ); |
| for (i = 0; i < n; i++) { |
| Bool b = False; |
| UWord* p = VG_(indexXA)( cuOffs, i ); |
| *p = chase_cuOff( &b, ents, ents_cache, *p ); |
| if (b) |
| b2 = True; |
| } |
| *changed = b2; |
| } |
| |
| static Bool TyEnt__subst_R_fields ( XArray* /* of TyEnt */ ents, |
| TyEntIndexCache* ents_cache, |
| /*MOD*/TyEnt* te ) |
| { |
| Bool b, changed = False; |
| switch (te->tag) { |
| case Te_EMPTY: |
| break; |
| case Te_INDIR: |
| te->Te.INDIR.indR |
| = chase_cuOff( &b, ents, ents_cache, te->Te.INDIR.indR ); |
| if (b) changed = True; |
| break; |
| case Te_UNKNOWN: |
| break; |
| case Te_Atom: |
| break; |
| case Te_Field: |
| te->Te.Field.typeR |
| = chase_cuOff( &b, ents, ents_cache, te->Te.Field.typeR ); |
| if (b) changed = True; |
| break; |
| case Te_Bound: |
| break; |
| case Te_TyBase: |
| break; |
| case Te_TyPtr: |
| case Te_TyRef: |
| case Te_TyPtrMbr: |
| case Te_TyRvalRef: |
| te->Te.TyPorR.typeR |
| = chase_cuOff( &b, ents, ents_cache, te->Te.TyPorR.typeR ); |
| if (b) changed = True; |
| break; |
| case Te_TyTyDef: |
| te->Te.TyTyDef.typeR |
| = chase_cuOff( &b, ents, ents_cache, te->Te.TyTyDef.typeR ); |
| if (b) changed = True; |
| break; |
| case Te_TyStOrUn: |
| chase_cuOffs_in_XArray( &b, ents, ents_cache, te->Te.TyStOrUn.fieldRs ); |
| if (b) changed = True; |
| break; |
| case Te_TyEnum: |
| chase_cuOffs_in_XArray( &b, ents, ents_cache, te->Te.TyEnum.atomRs ); |
| if (b) changed = True; |
| break; |
| case Te_TyArray: |
| te->Te.TyArray.typeR |
| = chase_cuOff( &b, ents, ents_cache, te->Te.TyArray.typeR ); |
| if (b) changed = True; |
| chase_cuOffs_in_XArray( &b, ents, ents_cache, te->Te.TyArray.boundRs ); |
| if (b) changed = True; |
| break; |
| case Te_TyFn: |
| break; |
| case Te_TyQual: |
| te->Te.TyQual.typeR |
| = chase_cuOff( &b, ents, ents_cache, te->Te.TyQual.typeR ); |
| if (b) changed = True; |
| break; |
| case Te_TyVoid: |
| break; |
| default: |
| ML_(pp_TyEnt)(te); |
| vg_assert(0); |
| } |
| return changed; |
| } |
| |
| /* Make a pass over 'ents'. For each tyent, inspect the target of any |
| 'R' or 'Rs' fields (those which refer to other tyents), and replace |
| any which point to INDIR nodes with the target of the indirection |
| (which should not itself be an indirection). In summary, this |
| routine shorts out all references to indirection nodes. */ |
| static |
| Word dedup_types_substitution_pass ( /*MOD*/XArray* /* of TyEnt */ ents, |
| TyEntIndexCache* ents_cache ) |
| { |
| Word i, n, nChanged = 0; |
| Bool b; |
| n = VG_(sizeXA)( ents ); |
| for (i = 0; i < n; i++) { |
| TyEnt* ent = VG_(indexXA)( ents, i ); |
| vg_assert(ent->tag != Te_EMPTY); |
| /* We have to substitute everything, even indirections, so as to |
| ensure that chains of indirections don't build up. */ |
| b = TyEnt__subst_R_fields( ents, ents_cache, ent ); |
| if (b) |
| nChanged++; |
| } |
| |
| return nChanged; |
| } |
| |
| |
| /* Make a pass over 'ents', building a dictionary of TyEnts as we go. |
| Look up each new tyent in the dictionary in turn. If it is already |
| in the dictionary, replace this tyent with an indirection to the |
| existing one, and delete any malloc'd stuff hanging off this one. |
| In summary, this routine commons up all tyents that are identical |
| as defined by TyEnt__cmp_by_all_except_cuOff. */ |
| static |
| Word dedup_types_commoning_pass ( /*MOD*/XArray* /* of TyEnt */ ents ) |
| { |
| Word n, i, nDeleted; |
| WordFM* dict; /* TyEnt* -> void */ |
| TyEnt* ent; |
| UWord keyW, valW; |
| |
| dict = VG_(newFM)( |
| ML_(dinfo_zalloc), "di.readdwarf3.dtcp.1", |
| ML_(dinfo_free), |
| (Word(*)(UWord,UWord)) ML_(TyEnt__cmp_by_all_except_cuOff) |
| ); |
| |
| nDeleted = 0; |
| n = VG_(sizeXA)( ents ); |
| for (i = 0; i < n; i++) { |
| ent = VG_(indexXA)( ents, i ); |
| vg_assert(ent->tag != Te_EMPTY); |
| |
| /* Ignore indirections, although check that they are |
| not forming a cycle. */ |
| if (ent->tag == Te_INDIR) { |
| vg_assert(ent->Te.INDIR.indR < ent->cuOff); |
| continue; |
| } |
| |
| keyW = valW = 0; |
| if (VG_(lookupFM)( dict, &keyW, &valW, (UWord)ent )) { |
| /* it's already in the dictionary. */ |
| TyEnt* old = (TyEnt*)keyW; |
| vg_assert(valW == 0); |
| vg_assert(old != ent); |
| vg_assert(old->tag != Te_INDIR); |
| /* since we are traversing the array in increasing order of |
| cuOff: */ |
| vg_assert(old->cuOff < ent->cuOff); |
| /* So anyway, dump this entry and replace it with an |
| indirection to the one in the dictionary. Note that the |
| assertion above guarantees that we cannot create cycles of |
| indirections, since we are always creating an indirection |
| to a tyent with a cuOff lower than this one. */ |
| ML_(TyEnt__make_EMPTY)( ent ); |
| ent->tag = Te_INDIR; |
| ent->Te.INDIR.indR = old->cuOff; |
| nDeleted++; |
| } else { |
| /* not in dictionary; add it and keep going. */ |
| VG_(addToFM)( dict, (UWord)ent, 0 ); |
| } |
| } |
| |
| VG_(deleteFM)( dict, NULL, NULL ); |
| |
| return nDeleted; |
| } |
| |
| |
| static |
| void dedup_types ( Bool td3, |
| /*MOD*/XArray* /* of TyEnt */ ents, |
| TyEntIndexCache* ents_cache ) |
| { |
| Word m, n, i, nDel, nSubst, nThresh; |
| if (0) td3 = True; |
| |
| n = VG_(sizeXA)( ents ); |
| |
| /* If a commoning pass and a substitution pass both make fewer than |
| this many changes, just stop. It's pointless to burn up CPU |
| time trying to compress the last 1% or so out of the array. */ |
| nThresh = n / 200; |
| |
| /* First we must sort .ents by its .cuOff fields, so we |
| can index into it. */ |
| VG_(setCmpFnXA)( ents, (XACmpFn_t) ML_(TyEnt__cmp_by_cuOff_only) ); |
| VG_(sortXA)( ents ); |
| |
| /* Now repeatedly do commoning and substitution passes over |
| the array, until there are no more changes. */ |
| do { |
| nDel = dedup_types_commoning_pass ( ents ); |
| nSubst = dedup_types_substitution_pass ( ents, ents_cache ); |
| vg_assert(nDel >= 0 && nSubst >= 0); |
| TRACE_D3(" %ld deletions, %ld substitutions\n", nDel, nSubst); |
| } while (nDel > nThresh || nSubst > nThresh); |
| |
| /* Sanity check: all INDIR nodes should point at a non-INDIR thing. |
| In fact this should be true at the end of every loop iteration |
| above (a commoning pass followed by a substitution pass), but |
| checking it on every iteration is excessively expensive. Note, |
| this loop also computes 'm' for the stats printing below it. */ |
| m = 0; |
| n = VG_(sizeXA)( ents ); |
| for (i = 0; i < n; i++) { |
| TyEnt *ent, *ind; |
| ent = VG_(indexXA)( ents, i ); |
| if (ent->tag != Te_INDIR) continue; |
| m++; |
| ind = ML_(TyEnts__index_by_cuOff)( ents, ents_cache, |
| ent->Te.INDIR.indR ); |
| vg_assert(ind); |
| vg_assert(ind->tag != Te_INDIR); |
| } |
| |
| TRACE_D3("Overall: %ld before, %ld after\n", n, n-m); |
| } |
| |
| |
| /*------------------------------------------------------------*/ |
| /*--- ---*/ |
| /*--- Resolution of references to type DIEs ---*/ |
| /*--- ---*/ |
| /*------------------------------------------------------------*/ |
| |
| /* Make a pass through the (temporary) variables array. Examine the |
| type of each variable, check is it found, and chase any Te_INDIRs. |
| Postcondition is: each variable has a typeR field that refers to a |
| valid type in tyents, or a Te_UNKNOWN, and is certainly guaranteed |
| not to refer to a Te_INDIR. (This is so that we can throw all the |
| Te_INDIRs away later). */ |
| |
| __attribute__((noinline)) |
| static void resolve_variable_types ( |
| void (*barf)( const HChar* ) __attribute__((noreturn)), |
| /*R-O*/XArray* /* of TyEnt */ ents, |
| /*MOD*/TyEntIndexCache* ents_cache, |
| /*MOD*/XArray* /* of TempVar* */ vars |
| ) |
| { |
| Word i, n; |
| n = VG_(sizeXA)( vars ); |
| for (i = 0; i < n; i++) { |
| TempVar* var = *(TempVar**)VG_(indexXA)( vars, i ); |
| /* This is the stated type of the variable. But it might be |
| an indirection, so be careful. */ |
| TyEnt* ent = ML_(TyEnts__index_by_cuOff)( ents, ents_cache, |
| var->typeR ); |
| if (ent && ent->tag == Te_INDIR) { |
| ent = ML_(TyEnts__index_by_cuOff)( ents, ents_cache, |
| ent->Te.INDIR.indR ); |
| vg_assert(ent); |
| vg_assert(ent->tag != Te_INDIR); |
| } |
| |
| /* Deal first with "normal" cases */ |
| if (ent && ML_(TyEnt__is_type)(ent)) { |
| var->typeR = ent->cuOff; |
| continue; |
| } |
| |
| /* If there's no ent, it probably we did not manage to read a |
| type at the cuOffset which is stated as being this variable's |
| type. Maybe a deficiency in parse_type_DIE. Complain. */ |
| if (ent == NULL) { |
| VG_(printf)("\n: Invalid cuOff = 0x%05lx\n", var->typeR ); |
| barf("resolve_variable_types: " |
| "cuOff does not refer to a known type"); |
| } |
| vg_assert(ent); |
| /* If ent has any other tag, something bad happened, along the |
| lines of var->typeR not referring to a type at all. */ |
| vg_assert(ent->tag == Te_UNKNOWN); |
| /* Just accept it; the type will be useless, but at least keep |
| going. */ |
| var->typeR = ent->cuOff; |
| } |
| } |
| |
| |
| /*------------------------------------------------------------*/ |
| /*--- ---*/ |
| /*--- Parsing of Compilation Units ---*/ |
| /*--- ---*/ |
| /*------------------------------------------------------------*/ |
| |
| static Int cmp_TempVar_by_dioff ( const void* v1, const void* v2 ) { |
| const TempVar* t1 = *(const TempVar *const *)v1; |
| const TempVar* t2 = *(const TempVar *const *)v2; |
| if (t1->dioff < t2->dioff) return -1; |
| if (t1->dioff > t2->dioff) return 1; |
| return 0; |
| } |
| |
| static void read_DIE ( |
| /*MOD*/WordFM* /* of (XArray* of AddrRange, void) */ rangestree, |
| /*MOD*/XArray* /* of TyEnt */ tyents, |
| /*MOD*/XArray* /* of TempVar* */ tempvars, |
| /*MOD*/XArray* /* of GExpr* */ gexprs, |
| /*MOD*/D3TypeParser* typarser, |
| /*MOD*/D3VarParser* varparser, |
| Cursor* c, Bool td3, CUConst* cc, Int level |
| ) |
| { |
| Cursor abbv; |
| ULong atag, abbv_code; |
| UWord posn; |
| UInt has_children; |
| UWord start_die_c_offset, start_abbv_c_offset; |
| UWord after_die_c_offset, after_abbv_c_offset; |
| |
| /* --- Deal with this DIE --- */ |
| posn = cook_die( cc, get_position_of_Cursor( c ) ); |
| abbv_code = get_ULEB128( c ); |
| set_abbv_Cursor( &abbv, td3, cc, abbv_code ); |
| atag = get_ULEB128( &abbv ); |
| TRACE_D3("\n"); |
| TRACE_D3(" <%d><%lx>: Abbrev Number: %llu (%s)\n", |
| level, posn, abbv_code, ML_(pp_DW_TAG)( atag ) ); |
| |
| if (atag == 0) |
| cc->barf("read_DIE: invalid zero tag on DIE"); |
| |
| has_children = get_UChar( &abbv ); |
| if (has_children != DW_children_no && has_children != DW_children_yes) |
| cc->barf("read_DIE: invalid has_children value"); |
| |
| /* We're set up to look at the fields of this DIE. Hand it off to |
| any parser(s) that want to see it. Since they will in general |
| advance both the DIE and abbrev cursors, remember their current |
| settings so that we can then back up and do one final pass over |
| the DIE, to print out its contents. */ |
| |
| start_die_c_offset = get_position_of_Cursor( c ); |
| start_abbv_c_offset = get_position_of_Cursor( &abbv ); |
| |
| while (True) { |
| FormContents cts; |
| ULong at_name = get_ULEB128( &abbv ); |
| ULong at_form = get_ULEB128( &abbv ); |
| if (at_name == 0 && at_form == 0) break; |
| TRACE_D3(" %18s: ", ML_(pp_DW_AT)(at_name)); |
| /* Get the form contents, but ignore them; the only purpose is |
| to print them, if td3 is True */ |
| get_Form_contents( &cts, cc, c, td3, (DW_FORM)at_form ); |
| TRACE_D3("\t"); |
| TRACE_D3("\n"); |
| } |
| |
| after_die_c_offset = get_position_of_Cursor( c ); |
| after_abbv_c_offset = get_position_of_Cursor( &abbv ); |
| |
| set_position_of_Cursor( c, start_die_c_offset ); |
| set_position_of_Cursor( &abbv, start_abbv_c_offset ); |
| |
| parse_type_DIE( tyents, |
| typarser, |
| (DW_TAG)atag, |
| posn, |
| level, |
| c, /* DIE cursor */ |
| &abbv, /* abbrev cursor */ |
| cc, |
| td3 ); |
| |
| set_position_of_Cursor( c, start_die_c_offset ); |
| set_position_of_Cursor( &abbv, start_abbv_c_offset ); |
| |
| parse_var_DIE( rangestree, |
| tempvars, |
| gexprs, |
| varparser, |
| (DW_TAG)atag, |
| posn, |
| level, |
| c, /* DIE cursor */ |
| &abbv, /* abbrev cursor */ |
| cc, |
| td3 ); |
| |
| set_position_of_Cursor( c, after_die_c_offset ); |
| set_position_of_Cursor( &abbv, after_abbv_c_offset ); |
| |
| /* --- Now recurse into its children, if any --- */ |
| if (has_children == DW_children_yes) { |
| if (0) TRACE_D3("BEGIN children of level %d\n", level); |
| while (True) { |
| atag = peek_ULEB128( c ); |
| if (atag == 0) break; |
| read_DIE( rangestree, tyents, tempvars, gexprs, |
| typarser, varparser, |
| c, td3, cc, level+1 ); |
| } |
| /* Now we need to eat the terminating zero */ |
| atag = get_ULEB128( c ); |
| vg_assert(atag == 0); |
| if (0) TRACE_D3("END children of level %d\n", level); |
| } |
| |
| } |
| |
| |
| static |
| void new_dwarf3_reader_wrk ( |
| struct _DebugInfo* di, |
| __attribute__((noreturn)) void (*barf)( const HChar* ), |
| DiSlice escn_debug_info, DiSlice escn_debug_types, |
| DiSlice escn_debug_abbv, DiSlice escn_debug_line, |
| DiSlice escn_debug_str, DiSlice escn_debug_ranges, |
| DiSlice escn_debug_loc, DiSlice escn_debug_info_alt, |
| DiSlice escn_debug_abbv_alt, DiSlice escn_debug_line_alt, |
| DiSlice escn_debug_str_alt |
| ) |
| { |
| XArray* /* of TyEnt */ tyents; |
| XArray* /* of TyEnt */ tyents_to_keep; |
| XArray* /* of GExpr* */ gexprs; |
| XArray* /* of TempVar* */ tempvars; |
| WordFM* /* of (XArray* of AddrRange, void) */ rangestree; |
| TyEntIndexCache* tyents_cache = NULL; |
| TyEntIndexCache* tyents_to_keep_cache = NULL; |
| TempVar *varp, *varp2; |
| GExpr* gexpr; |
| Cursor abbv; /* for showing .debug_abbrev */ |
| Cursor info; /* primary cursor for parsing .debug_info */ |
| Cursor ranges; /* for showing .debug_ranges */ |
| D3TypeParser typarser; |
| D3VarParser varparser; |
| Addr dr_base; |
| UWord dr_offset; |
| Word i, j, n; |
| Bool td3 = di->trace_symtab; |
| XArray* /* of TempVar* */ dioff_lookup_tab; |
| Int pass; |
| VgHashTable signature_types; |
| #if 0 |
| /* This doesn't work properly because it assumes all entries are |
| packed end to end, with no holes. But that doesn't always |
| appear to be the case, so it loses sync. And the D3 spec |
| doesn't appear to require a no-hole situation either. */ |
| /* Display .debug_loc */ |
| Addr dl_base; |
| UWord dl_offset; |
| Cursor loc; /* for showing .debug_loc */ |
| TRACE_SYMTAB("\n"); |
| TRACE_SYMTAB("\n------ The contents of .debug_loc ------\n"); |
| TRACE_SYMTAB(" Offset Begin End Expression\n"); |
| init_Cursor( &loc, debug_loc_img, |
| debug_loc_sz, 0, barf, |
| "Overrun whilst reading .debug_loc section(1)" ); |
| dl_base = 0; |
| dl_offset = 0; |
| while (True) { |
| UWord w1, w2; |
| UWord len; |
| if (is_at_end_Cursor( &loc )) |
| break; |
| |
| /* Read a (host-)word pair. This is something of a hack since |
| the word size to read is really dictated by the ELF file; |
| however, we assume we're reading a file with the same |
| word-sizeness as the host. Reasonably enough. */ |
| w1 = get_UWord( &loc ); |
| w2 = get_UWord( &loc ); |
| |
| if (w1 == 0 && w2 == 0) { |
| /* end of list. reset 'base' */ |
| TRACE_D3(" %08lx <End of list>\n", dl_offset); |
| dl_base = 0; |
| dl_offset = get_position_of_Cursor( &loc ); |
| continue; |
| } |
| |
| if (w1 == -1UL) { |
| /* new value for 'base' */ |
| TRACE_D3(" %08lx %16lx %08lx (base address)\n", |
| dl_offset, w1, w2); |
| dl_base = w2; |
| continue; |
| } |
| |
| /* else a location expression follows */ |
| TRACE_D3(" %08lx %08lx %08lx ", |
| dl_offset, w1 + dl_base, w2 + dl_base); |
| len = (UWord)get_UShort( &loc ); |
| while (len > 0) { |
| UChar byte = get_UChar( &loc ); |
| TRACE_D3("%02x", (UInt)byte); |
| len--; |
| } |
| TRACE_SYMTAB("\n"); |
| } |
| #endif |
| |
| /* Display .debug_ranges */ |
| TRACE_SYMTAB("\n"); |
| TRACE_SYMTAB("\n------ The contents of .debug_ranges ------\n"); |
| TRACE_SYMTAB(" Offset Begin End\n"); |
| if (ML_(sli_is_valid)(escn_debug_ranges)) { |
| init_Cursor( &ranges, escn_debug_ranges, 0, barf, |
| "Overrun whilst reading .debug_ranges section(1)" ); |
| dr_base = 0; |
| dr_offset = 0; |
| while (True) { |
| UWord w1, w2; |
| |
| if (is_at_end_Cursor( &ranges )) |
| break; |
| |
| /* Read a (host-)word pair. This is something of a hack since |
| the word size to read is really dictated by the ELF file; |
| however, we assume we're reading a file with the same |
| word-sizeness as the host. Reasonably enough. */ |
| w1 = get_UWord( &ranges ); |
| w2 = get_UWord( &ranges ); |
| |
| if (w1 == 0 && w2 == 0) { |
| /* end of list. reset 'base' */ |
| TRACE_D3(" %08lx <End of list>\n", dr_offset); |
| dr_base = 0; |
| dr_offset = get_position_of_Cursor( &ranges ); |
| continue; |
| } |
| |
| if (w1 == -1UL) { |
| /* new value for 'base' */ |
| TRACE_D3(" %08lx %16lx %08lx (base address)\n", |
| dr_offset, w1, w2); |
| dr_base = w2; |
| continue; |
| } |
| |
| /* else a range [w1+base, w2+base) is denoted */ |
| TRACE_D3(" %08lx %08lx %08lx\n", |
| dr_offset, w1 + dr_base, w2 + dr_base); |
| } |
| } |
| |
| /* Display .debug_abbrev */ |
| TRACE_SYMTAB("\n"); |
| TRACE_SYMTAB("\n------ The contents of .debug_abbrev ------\n"); |
| if (ML_(sli_is_valid)(escn_debug_abbv)) { |
| init_Cursor( &abbv, escn_debug_abbv, 0, barf, |
| "Overrun whilst reading .debug_abbrev section" ); |
| while (True) { |
| if (is_at_end_Cursor( &abbv )) |
| break; |
| /* Read one abbreviation table */ |
| TRACE_D3(" Number TAG\n"); |
| while (True) { |
| ULong atag; |
| UInt has_children; |
| ULong acode = get_ULEB128( &abbv ); |
| if (acode == 0) break; /* end of the table */ |
| atag = get_ULEB128( &abbv ); |
| has_children = get_UChar( &abbv ); |
| TRACE_D3(" %llu %s [%s]\n", |
| acode, ML_(pp_DW_TAG)(atag), |
| ML_(pp_DW_children)(has_children)); |
| while (True) { |
| ULong at_name = get_ULEB128( &abbv ); |
| ULong at_form = get_ULEB128( &abbv ); |
| if (at_name == 0 && at_form == 0) break; |
| TRACE_D3(" %18s %s\n", |
| ML_(pp_DW_AT)(at_name), ML_(pp_DW_FORM)(at_form)); |
| } |
| } |
| } |
| } |
| TRACE_SYMTAB("\n"); |
| |
| /* We'll park the harvested type information in here. Also create |
| a fake "void" entry with offset D3_FAKEVOID_CUOFF, so we always |
| have at least one type entry to refer to. D3_FAKEVOID_CUOFF is |
| huge and presumably will not occur in any valid DWARF3 file -- |
| it would need to have a .debug_info section 4GB long for that to |
| happen. These type entries end up in the DebugInfo. */ |
| tyents = VG_(newXA)( ML_(dinfo_zalloc), |
| "di.readdwarf3.ndrw.1 (TyEnt temp array)", |
| ML_(dinfo_free), sizeof(TyEnt) ); |
| { TyEnt tyent; |
| VG_(memset)(&tyent, 0, sizeof(tyent)); |
| tyent.tag = Te_TyVoid; |
| tyent.cuOff = D3_FAKEVOID_CUOFF; |
| tyent.Te.TyVoid.isFake = True; |
| VG_(addToXA)( tyents, &tyent ); |
| } |
| { TyEnt tyent; |
| VG_(memset)(&tyent, 0, sizeof(tyent)); |
| tyent.tag = Te_UNKNOWN; |
| tyent.cuOff = D3_INVALID_CUOFF; |
| VG_(addToXA)( tyents, &tyent ); |
| } |
| |
| /* This is a tree used to unique-ify the range lists that are |
| manufactured by parse_var_DIE. References to the keys in the |
| tree wind up in .rngMany fields in TempVars. We'll need to |
| delete this tree, and the XArrays attached to it, at the end of |
| this function. */ |
| rangestree = VG_(newFM)( ML_(dinfo_zalloc), |
| "di.readdwarf3.ndrw.2 (rangestree)", |
| ML_(dinfo_free), |
| (Word(*)(UWord,UWord))cmp__XArrays_of_AddrRange ); |
| |
| /* List of variables we're accumulating. These don't end up in the |
| DebugInfo; instead their contents are handed to ML_(addVar) and |
| the list elements are then deleted. */ |
| tempvars = VG_(newXA)( ML_(dinfo_zalloc), |
| "di.readdwarf3.ndrw.3 (TempVar*s array)", |
| ML_(dinfo_free), |
| sizeof(TempVar*) ); |
| |
| /* List of GExprs we're accumulating. These wind up in the |
| DebugInfo. */ |
| gexprs = VG_(newXA)( ML_(dinfo_zalloc), "di.readdwarf3.ndrw.4", |
| ML_(dinfo_free), sizeof(GExpr*) ); |
| |
| /* We need a D3TypeParser to keep track of partially constructed |
| types. It'll be discarded as soon as we've completed the CU, |
| since the resulting information is tipped in to 'tyents' as it |
| is generated. */ |
| VG_(memset)( &typarser, 0, sizeof(typarser) ); |
| typarser.sp = -1; |
| typarser.language = '?'; |
| for (i = 0; i < N_D3_TYPE_STACK; i++) { |
| typarser.qparentE[i].tag = Te_EMPTY; |
| typarser.qparentE[i].cuOff = D3_INVALID_CUOFF; |
| } |
| |
| VG_(memset)( &varparser, 0, sizeof(varparser) ); |
| varparser.sp = -1; |
| |
| signature_types = VG_(HT_construct) ("signature_types"); |
| |
| /* Do an initial pass to scan the .debug_types section, if any, and |
| fill in the signatured types hash table. This lets us handle |
| mapping from a type signature to a (cooked) DIE offset directly |
| in get_Form_contents. */ |
| if (ML_(sli_is_valid)(escn_debug_types)) { |
| init_Cursor( &info, escn_debug_types, 0, barf, |
| "Overrun whilst reading .debug_types section" ); |
| TRACE_D3("\n------ Collecting signatures from " |
| ".debug_types section ------\n"); |
| |
| while (True) { |
| UWord cu_start_offset, cu_offset_now; |
| CUConst cc; |
| |
| cu_start_offset = get_position_of_Cursor( &info ); |
| TRACE_D3("\n"); |
| TRACE_D3(" Compilation Unit @ offset 0x%lx:\n", cu_start_offset); |
| /* parse_CU_header initialises the CU's set_abbv_Cursor cache |
| (saC_cache) */ |
| parse_CU_Header( &cc, td3, &info, escn_debug_abbv, True, False ); |
| |
| /* Needed by cook_die. */ |
| cc.types_cuOff_bias = escn_debug_info.szB; |
| |
| record_signatured_type( signature_types, cc.type_signature, |
| cook_die( &cc, cc.type_offset )); |
| |
| /* Until proven otherwise we assume we don't need the icc9 |
| workaround in this case; see the DIE-reading loop below |
| for details. */ |
| cu_offset_now = (cu_start_offset + cc.unit_length |
| + (cc.is_dw64 ? 12 : 4)); |
| |
| if (cu_offset_now >= escn_debug_types.szB) |
| break; |
| |
| set_position_of_Cursor ( &info, cu_offset_now ); |
| } |
| } |
| |
| /* Perform three DIE-reading passes. The first pass reads DIEs from |
| alternate .debug_info (if any), the second pass reads DIEs from |
| .debug_info, and the third pass reads DIEs from .debug_types. |
| Moving the body of this loop into a separate function would |
| require a large number of arguments to be passed in, so it is |
| kept inline instead. */ |
| for (pass = 0; pass < 3; ++pass) { |
| ULong section_size; |
| |
| if (pass == 0) { |
| if (!ML_(sli_is_valid)(escn_debug_info_alt)) |
| continue; |
| /* Now loop over the Compilation Units listed in the alternate |
| .debug_info section (see D3SPEC sec 7.5) paras 1 and 2. |
| Each compilation unit contains a Compilation Unit Header |
| followed by precisely one DW_TAG_compile_unit or |
| DW_TAG_partial_unit DIE. */ |
| init_Cursor( &info, escn_debug_info_alt, 0, barf, |
| "Overrun whilst reading alternate .debug_info section" ); |
| section_size = escn_debug_info_alt.szB; |
| |
| TRACE_D3("\n------ Parsing alternate .debug_info section ------\n"); |
| } else if (pass == 1) { |
| /* Now loop over the Compilation Units listed in the .debug_info |
| section (see D3SPEC sec 7.5) paras 1 and 2. Each compilation |
| unit contains a Compilation Unit Header followed by precisely |
| one DW_TAG_compile_unit or DW_TAG_partial_unit DIE. */ |
| init_Cursor( &info, escn_debug_info, 0, barf, |
| "Overrun whilst reading .debug_info section" ); |
| section_size = escn_debug_info.szB; |
| |
| TRACE_D3("\n------ Parsing .debug_info section ------\n"); |
| } else { |
| if (!ML_(sli_is_valid)(escn_debug_types)) |
| continue; |
| init_Cursor( &info, escn_debug_types, 0, barf, |
| "Overrun whilst reading .debug_types section" ); |
| section_size = escn_debug_types.szB; |
| |
| TRACE_D3("\n------ Parsing .debug_types section ------\n"); |
| } |
| |
| while (True) { |
| ULong cu_start_offset, cu_offset_now; |
| CUConst cc; |
| /* It may be that the stated size of this CU is larger than the |
| amount of stuff actually in it. icc9 seems to generate CUs |
| thusly. We use these variables to figure out if this is |
| indeed the case, and if so how many bytes we need to skip to |
| get to the start of the next CU. Not skipping those bytes |
| causes us to misidentify the start of the next CU, and it all |
| goes badly wrong after that (not surprisingly). */ |
| UWord cu_size_including_IniLen, cu_amount_used; |
| |
| /* It seems icc9 finishes the DIE info before debug_info_sz |
| bytes have been used up. So be flexible, and declare the |
| sequence complete if there is not enough remaining bytes to |
| hold even the smallest conceivable CU header. (11 bytes I |
| reckon). */ |
| /* JRS 23Jan09: I suspect this is no longer necessary now that |
| the code below contains a 'while (cu_amount_used < |
| cu_size_including_IniLen ...' style loop, which skips over |
| any leftover bytes at the end of a CU in the case where the |
| CU's stated size is larger than its actual size (as |
| determined by reading all its DIEs). However, for prudence, |
| I'll leave the following test in place. I can't see that a |
| CU header can be smaller than 11 bytes, so I don't think |
| there's any harm possible through the test -- it just adds |
| robustness. */ |
| Word avail = get_remaining_length_Cursor( &info ); |
| if (avail < 11) { |
| if (avail > 0) |
| TRACE_D3("new_dwarf3_reader_wrk: warning: " |
| "%ld unused bytes after end of DIEs\n", avail); |
| break; |
| } |
| |
| /* Check the varparser's stack is in a sane state. */ |
| vg_assert(varparser.sp == -1); |
| for (i = 0; i < N_D3_VAR_STACK; i++) { |
| vg_assert(varparser.ranges[i] == NULL); |
| vg_assert(varparser.level[i] == 0); |
| } |
| for (i = 0; i < N_D3_TYPE_STACK; i++) { |
| vg_assert(typarser.qparentE[i].cuOff == D3_INVALID_CUOFF); |
| vg_assert(typarser.qparentE[i].tag == Te_EMPTY); |
| vg_assert(typarser.qlevel[i] == 0); |
| } |
| |
| cu_start_offset = get_position_of_Cursor( &info ); |
| TRACE_D3("\n"); |
| TRACE_D3(" Compilation Unit @ offset 0x%llx:\n", cu_start_offset); |
| /* parse_CU_header initialises the CU's set_abbv_Cursor cache |
| (saC_cache) */ |
| if (pass == 0) { |
| parse_CU_Header( &cc, td3, &info, escn_debug_abbv_alt, |
| False, True ); |
| } else { |
| parse_CU_Header( &cc, td3, &info, escn_debug_abbv, |
| pass == 2, False ); |
| } |
| cc.escn_debug_str = pass == 0 ? escn_debug_str_alt |
| : escn_debug_str; |
| cc.escn_debug_ranges = escn_debug_ranges; |
| cc.escn_debug_loc = escn_debug_loc; |
| cc.escn_debug_line = pass == 0 ? escn_debug_line_alt |
| : escn_debug_line; |
| cc.escn_debug_info = pass == 0 ? escn_debug_info_alt |
| : escn_debug_info; |
| cc.escn_debug_types = escn_debug_types; |
| cc.escn_debug_info_alt = escn_debug_info_alt; |
| cc.escn_debug_str_alt = escn_debug_str_alt; |
| cc.types_cuOff_bias = escn_debug_info.szB; |
| cc.alt_cuOff_bias = escn_debug_info.szB + escn_debug_types.szB; |
| cc.cu_start_offset = cu_start_offset; |
| cc.di = di; |
| /* The CU's svma can be deduced by looking at the AT_low_pc |
| value in the top level TAG_compile_unit, which is the topmost |
| DIE. We'll leave it for the 'varparser' to acquire that info |
| and fill it in -- since it is the only party to want to know |
| it. */ |
| cc.cu_svma_known = False; |
| cc.cu_svma = 0; |
| |
| cc.signature_types = signature_types; |
| |
| /* Create a fake outermost-level range covering the entire |
| address range. So we always have *something* to catch all |
| variable declarations. */ |
| varstack_push( &cc, &varparser, td3, |
| unitary_range_list(0UL, ~0UL), |
| -1, False/*isFunc*/, NULL/*fbGX*/ ); |
| |
| /* And set up the file name table. When we come across the top |
| level DIE for this CU (which is what the next call to |
| read_DIE should process) we will copy all the file names out |
| of the .debug_line img area and use this table to look up the |
| copies when we later see filename numbers in DW_TAG_variables |
| etc. */ |
| vg_assert(!varparser.filenameTable ); |
| varparser.filenameTable |
| = VG_(newXA)( ML_(dinfo_zalloc), "di.readdwarf3.ndrw.5", |
| ML_(dinfo_free), |
| sizeof(UChar*) ); |
| vg_assert(varparser.filenameTable); |
| |
| /* Now read the one-and-only top-level DIE for this CU. */ |
| vg_assert(varparser.sp == 0); |
| read_DIE( rangestree, |
| tyents, tempvars, gexprs, |
| &typarser, &varparser, |
| &info, td3, &cc, 0 ); |
| |
| cu_offset_now = get_position_of_Cursor( &info ); |
| |
| if (0) VG_(printf)("Travelled: %llu size %llu\n", |
| cu_offset_now - cc.cu_start_offset, |
| cc.unit_length + (cc.is_dw64 ? 12 : 4)); |
| |
| /* How big the CU claims it is .. */ |
| cu_size_including_IniLen = cc.unit_length + (cc.is_dw64 ? 12 : 4); |
| /* .. vs how big we have found it to be */ |
| cu_amount_used = cu_offset_now - cc.cu_start_offset; |
| |
| if (1) TRACE_D3("offset now %lld, d-i-size %lld\n", |
| cu_offset_now, section_size); |
| if (cu_offset_now > section_size) |
| barf("toplevel DIEs beyond end of CU"); |
| |
| /* If the CU is bigger than it claims to be, we've got a serious |
| problem. */ |
| if (cu_amount_used > cu_size_including_IniLen) |
| barf("CU's actual size appears to be larger than it claims it is"); |
| |
| /* If the CU is smaller than it claims to be, we need to skip some |
| bytes. Loop updates cu_offset_new and cu_amount_used. */ |
| while (cu_amount_used < cu_size_including_IniLen |
| && get_remaining_length_Cursor( &info ) > 0) { |
| if (0) VG_(printf)("SKIP\n"); |
| (void)get_UChar( &info ); |
| cu_offset_now = get_position_of_Cursor( &info ); |
| cu_amount_used = cu_offset_now - cc.cu_start_offset; |
| } |
| |
| /* Preen to level -2. DIEs have level >= 0 so -2 cannot occur |
| anywhere else at all. Our fake the-entire-address-space |
| range is at level -1, so preening to -2 should completely |
| empty the stack out. */ |
| TRACE_D3("\n"); |
| varstack_preen( &varparser, td3, -2 ); |
| /* Similarly, empty the type stack out. */ |
| typestack_preen( &typarser, td3, -2 ); |
| |
| TRACE_D3("set_abbv_Cursor cache: %lu queries, %lu misses\n", |
| cc.saC_cache_queries, cc.saC_cache_misses); |
| |
| vg_assert(varparser.filenameTable ); |
| VG_(deleteXA)( varparser.filenameTable ); |
| varparser.filenameTable = NULL; |
| |
| if (cu_offset_now == section_size) |
| break; |
| /* else keep going */ |
| } |
| } |
| |
| /* From here on we're post-processing the stuff we got |
| out of the .debug_info section. */ |
| if (td3) { |
| TRACE_D3("\n"); |
| ML_(pp_TyEnts)(tyents, "Initial type entity (TyEnt) array"); |
| TRACE_D3("\n"); |
| TRACE_D3("------ Compressing type entries ------\n"); |
| } |
| |
| tyents_cache = ML_(dinfo_zalloc)( "di.readdwarf3.ndrw.6", |
| sizeof(TyEntIndexCache) ); |
| ML_(TyEntIndexCache__invalidate)( tyents_cache ); |
| dedup_types( td3, tyents, tyents_cache ); |
| if (td3) { |
| TRACE_D3("\n"); |
| ML_(pp_TyEnts)(tyents, "After type entity (TyEnt) compression"); |
| } |
| |
| TRACE_D3("\n"); |
| TRACE_D3("------ Resolving the types of variables ------\n" ); |
| resolve_variable_types( barf, tyents, tyents_cache, tempvars ); |
| |
| /* Copy all the non-INDIR tyents into a new table. For large |
| .so's, about 90% of the tyents will by now have been resolved to |
| INDIRs, and we no longer need them, and so don't need to store |
| them. */ |
| tyents_to_keep |
| = VG_(newXA)( ML_(dinfo_zalloc), |
| "di.readdwarf3.ndrw.7 (TyEnt to-keep array)", |
| ML_(dinfo_free), sizeof(TyEnt) ); |
| n = VG_(sizeXA)( tyents ); |
| for (i = 0; i < n; i++) { |
| TyEnt* ent = VG_(indexXA)( tyents, i ); |
| if (ent->tag != Te_INDIR) |
| VG_(addToXA)( tyents_to_keep, ent ); |
| } |
| |
| VG_(deleteXA)( tyents ); |
| tyents = NULL; |
| ML_(dinfo_free)( tyents_cache ); |
| tyents_cache = NULL; |
| |
| /* Sort tyents_to_keep so we can lookup in it. A complete (if |
| minor) waste of time, since tyents itself is sorted, but |
| necessary since VG_(lookupXA) refuses to cooperate if we |
| don't. */ |
| VG_(setCmpFnXA)( tyents_to_keep, (XACmpFn_t) ML_(TyEnt__cmp_by_cuOff_only) ); |
| VG_(sortXA)( tyents_to_keep ); |
| |
| /* Enable cacheing on tyents_to_keep */ |
| tyents_to_keep_cache |
| = ML_(dinfo_zalloc)( "di.readdwarf3.ndrw.8", |
| sizeof(TyEntIndexCache) ); |
| ML_(TyEntIndexCache__invalidate)( tyents_to_keep_cache ); |
| |
| /* And record the tyents in the DebugInfo. We do this before |
| starting to hand variables to ML_(addVar), since if ML_(addVar) |
| wants to do debug printing (of the types of said vars) then it |
| will need the tyents.*/ |
| vg_assert(!di->admin_tyents); |
| di->admin_tyents = tyents_to_keep; |
| |
| /* Bias all the location expressions. */ |
| TRACE_D3("\n"); |
| TRACE_D3("------ Biasing the location expressions ------\n" ); |
| |
| n = VG_(sizeXA)( gexprs ); |
| for (i = 0; i < n; i++) { |
| gexpr = *(GExpr**)VG_(indexXA)( gexprs, i ); |
| bias_GX( gexpr, di ); |
| } |
| |
| TRACE_D3("\n"); |
| TRACE_D3("------ Acquired the following variables: ------\n\n"); |
| |
| /* Park (pointers to) all the vars in an XArray, so we can look up |
| abstract origins quickly. The array is sorted (hence, looked-up |
| by) the .dioff fields. Since the .dioffs should be in strictly |
| ascending order, there is no need to sort the array after |
| construction. The ascendingness is however asserted for. */ |
| dioff_lookup_tab |
| = VG_(newXA)( ML_(dinfo_zalloc), "di.readdwarf3.ndrw.9", |
| ML_(dinfo_free), |
| sizeof(TempVar*) ); |
| vg_assert(dioff_lookup_tab); |
| |
| n = VG_(sizeXA)( tempvars ); |
| Word first_primary_var = 0; |
| for (first_primary_var = 0; |
| escn_debug_info_alt.szB/*really?*/ && first_primary_var < n; |
| first_primary_var++) { |
| varp = *(TempVar**)VG_(indexXA)( tempvars, first_primary_var ); |
| if (varp->dioff < escn_debug_info.szB + escn_debug_types.szB) |
| break; |
| } |
| for (i = 0; i < n; i++) { |
| varp = *(TempVar**)VG_(indexXA)( tempvars, (i + first_primary_var) % n ); |
| if (i > first_primary_var) { |
| varp2 = *(TempVar**)VG_(indexXA)( tempvars, |
| (i + first_primary_var - 1) % n ); |
| /* why should this hold? Only, I think, because we've |
| constructed the array by reading .debug_info sequentially, |
| and so the array .dioff fields should reflect that, and be |
| strictly ascending. */ |
| vg_assert(varp2->dioff < varp->dioff); |
| } |
| VG_(addToXA)( dioff_lookup_tab, &varp ); |
| } |
| VG_(setCmpFnXA)( dioff_lookup_tab, cmp_TempVar_by_dioff ); |
| VG_(sortXA)( dioff_lookup_tab ); /* POINTLESS; FIXME: rm */ |
| |
| /* Now visit each var. Collect up as much info as possible for |
| each var and hand it to ML_(addVar). */ |
| n = VG_(sizeXA)( tempvars ); |
| for (j = 0; j < n; j++) { |
| TyEnt* ent; |
| varp = *(TempVar**)VG_(indexXA)( tempvars, j ); |
| |
| /* Possibly show .. */ |
| if (td3) { |
| VG_(printf)("<%lx> addVar: level %d: %s :: ", |
| varp->dioff, |
| varp->level, |
| varp->name ? varp->name : "<anon_var>" ); |
| if (varp->typeR) { |
| ML_(pp_TyEnt_C_ishly)( tyents_to_keep, varp->typeR ); |
| } else { |
| VG_(printf)("NULL"); |
| } |
| VG_(printf)("\n Loc="); |
| if (varp->gexpr) { |
| ML_(pp_GX)(varp->gexpr); |
| } else { |
| VG_(printf)("NULL"); |
| } |
| VG_(printf)("\n"); |
| if (varp->fbGX) { |
| VG_(printf)(" FrB="); |
| ML_(pp_GX)( varp->fbGX ); |
| VG_(printf)("\n"); |
| } else { |
| VG_(printf)(" FrB=none\n"); |
| } |
| VG_(printf)(" declared at: %s:%d\n", |
| varp->fName ? varp->fName : "NULL", |
| varp->fLine ); |
| if (varp->absOri != (UWord)D3_INVALID_CUOFF) |
| VG_(printf)(" abstract origin: <%lx>\n", varp->absOri); |
| } |
| |
| /* Skip variables which have no location. These must be |
| abstract instances; they are useless as-is since with no |
| location they have no specified memory location. They will |
| presumably be referred to via the absOri fields of other |
| variables. */ |
| if (!varp->gexpr) { |
| TRACE_D3(" SKIP (no location)\n\n"); |
| continue; |
| } |
| |
| /* So it has a location, at least. If it refers to some other |
| entry through its absOri field, pull in further info through |
| that. */ |
| if (varp->absOri != (UWord)D3_INVALID_CUOFF) { |
| Bool found; |
| Word ixFirst, ixLast; |
| TempVar key; |
| TempVar* keyp = &key; |
| TempVar *varAI; |
| VG_(memset)(&key, 0, sizeof(key)); /* not necessary */ |
| key.dioff = varp->absOri; /* this is what we want to find */ |
| found = VG_(lookupXA)( dioff_lookup_tab, &keyp, |
| &ixFirst, &ixLast ); |
| if (!found) { |
| /* barf("DW_AT_abstract_origin can't be resolved"); */ |
| TRACE_D3(" SKIP (DW_AT_abstract_origin can't be resolved)\n\n"); |
| continue; |
| } |
| /* If the following fails, there is more than one entry with |
| the same dioff. Which can't happen. */ |
| vg_assert(ixFirst == ixLast); |
| varAI = *(TempVar**)VG_(indexXA)( dioff_lookup_tab, ixFirst ); |
| /* stay sane */ |
| vg_assert(varAI); |
| vg_assert(varAI->dioff == varp->absOri); |
| |
| /* Copy what useful info we can. */ |
| if (varAI->typeR && !varp->typeR) |
| varp->typeR = varAI->typeR; |
| if (varAI->name && !varp->name) |
| varp->name = varAI->name; |
| if (varAI->fName && !varp->fName) |
| varp->fName = varAI->fName; |
| if (varAI->fLine > 0 && varp->fLine == 0) |
| varp->fLine = varAI->fLine; |
| } |
| |
| /* Give it a name if it doesn't have one. */ |
| if (!varp->name) |
| varp->name = ML_(addStr)( di, "<anon_var>", -1 ); |
| |
| /* So now does it have enough info to be useful? */ |
| /* NOTE: re typeR: this is a hack. If typeR is Te_UNKNOWN then |
| the type didn't get resolved. Really, in that case |
| something's broken earlier on, and should be fixed, rather |
| than just skipping the variable. */ |
| ent = ML_(TyEnts__index_by_cuOff)( tyents_to_keep, |
| tyents_to_keep_cache, |
| varp->typeR ); |
| /* The next two assertions should be guaranteed by |
| our previous call to resolve_variable_types. */ |
| vg_assert(ent); |
| vg_assert(ML_(TyEnt__is_type)(ent) || ent->tag == Te_UNKNOWN); |
| |
| if (ent->tag == Te_UNKNOWN) continue; |
| |
| vg_assert(varp->gexpr); |
| vg_assert(varp->name); |
| vg_assert(varp->typeR); |
| vg_assert(varp->level >= 0); |
| |
| /* Ok. So we're going to keep it. Call ML_(addVar) once for |
| each address range in which the variable exists. */ |
| TRACE_D3(" ACQUIRE for range(s) "); |
| { AddrRange oneRange; |
| AddrRange* varPcRanges; |
| Word nVarPcRanges; |
| /* Set up to iterate over address ranges, however |
| represented. */ |
| if (varp->nRanges == 0 || varp->nRanges == 1) { |
| vg_assert(!varp->rngMany); |
| if (varp->nRanges == 0) { |
| vg_assert(varp->rngOneMin == 0); |
| vg_assert(varp->rngOneMax == 0); |
| } |
| nVarPcRanges = varp->nRanges; |
| oneRange.aMin = varp->rngOneMin; |
| oneRange.aMax = varp->rngOneMax; |
| varPcRanges = &oneRange; |
| } else { |
| vg_assert(varp->rngMany); |
| vg_assert(varp->rngOneMin == 0); |
| vg_assert(varp->rngOneMax == 0); |
| nVarPcRanges = VG_(sizeXA)(varp->rngMany); |
| vg_assert(nVarPcRanges >= 2); |
| vg_assert(nVarPcRanges == (Word)varp->nRanges); |
| varPcRanges = VG_(indexXA)(varp->rngMany, 0); |
| } |
| if (varp->level == 0) |
| vg_assert( nVarPcRanges == 1 ); |
| /* and iterate */ |
| for (i = 0; i < nVarPcRanges; i++) { |
| Addr pcMin = varPcRanges[i].aMin; |
| Addr pcMax = varPcRanges[i].aMax; |
| vg_assert(pcMin <= pcMax); |
| /* Level 0 is the global address range. So at level 0 we |
| don't want to bias pcMin/pcMax; but at all other levels |
| we do since those are derived from svmas in the Dwarf |
| we're reading. Be paranoid ... */ |
| if (varp->level == 0) { |
| vg_assert(pcMin == (Addr)0); |
| vg_assert(pcMax == ~(Addr)0); |
| } else { |
| /* vg_assert(pcMin > (Addr)0); |
| No .. we can legitimately expect to see ranges like |
| 0x0-0x11D (pre-biasing, of course). */ |
| vg_assert(pcMax < ~(Addr)0); |
| } |
| |
| /* Apply text biasing, for non-global variables. */ |
| if (varp->level > 0) { |
| pcMin += di->text_debug_bias; |
| pcMax += di->text_debug_bias; |
| } |
| |
| if (i > 0 && (i%2) == 0) |
| TRACE_D3("\n "); |
| TRACE_D3("[%#lx,%#lx] ", pcMin, pcMax ); |
| |
| ML_(addVar)( |
| di, varp->level, |
| pcMin, pcMax, |
| varp->name, varp->typeR, |
| varp->gexpr, varp->fbGX, |
| varp->fName, varp->fLine, td3 |
| ); |
| } |
| } |
| |
| TRACE_D3("\n\n"); |
| /* and move on to the next var */ |
| } |
| |
| /* Now free all the TempVars */ |
| n = VG_(sizeXA)( tempvars ); |
| for (i = 0; i < n; i++) { |
| varp = *(TempVar**)VG_(indexXA)( tempvars, i ); |
| ML_(dinfo_free)(varp); |
| } |
| VG_(deleteXA)( tempvars ); |
| tempvars = NULL; |
| |
| /* and the temp lookup table */ |
| VG_(deleteXA)( dioff_lookup_tab ); |
| |
| /* and the ranges tree. Note that we need to also free the XArrays |
| which constitute the keys, hence pass VG_(deleteXA) as a |
| key-finalizer. */ |
| VG_(deleteFM)( rangestree, (void(*)(UWord))VG_(deleteXA), NULL ); |
| |
| /* and the tyents_to_keep cache */ |
| ML_(dinfo_free)( tyents_to_keep_cache ); |
| tyents_to_keep_cache = NULL; |
| |
| vg_assert( varparser.filenameTable == NULL ); |
| |
| /* And the signatured type hash. */ |
| VG_(HT_destruct) ( signature_types, ML_(dinfo_free) ); |
| |
| /* record the GExprs in di so they can be freed later */ |
| vg_assert(!di->admin_gexprs); |
| di->admin_gexprs = gexprs; |
| } |
| |
| |
| /*------------------------------------------------------------*/ |
| /*--- ---*/ |
| /*--- The "new" DWARF3 reader -- top level control logic ---*/ |
| /*--- ---*/ |
| /*------------------------------------------------------------*/ |
| |
| static Bool d3rd_jmpbuf_valid = False; |
| static const HChar* d3rd_jmpbuf_reason = NULL; |
| static VG_MINIMAL_JMP_BUF(d3rd_jmpbuf); |
| |
| static __attribute__((noreturn)) void barf ( const HChar* reason ) { |
| vg_assert(d3rd_jmpbuf_valid); |
| d3rd_jmpbuf_reason = reason; |
| VG_MINIMAL_LONGJMP(d3rd_jmpbuf); |
| /*NOTREACHED*/ |
| vg_assert(0); |
| } |
| |
| |
| void |
| ML_(new_dwarf3_reader) ( |
| struct _DebugInfo* di, |
| DiSlice escn_debug_info, DiSlice escn_debug_types, |
| DiSlice escn_debug_abbv, DiSlice escn_debug_line, |
| DiSlice escn_debug_str, DiSlice escn_debug_ranges, |
| DiSlice escn_debug_loc, DiSlice escn_debug_info_alt, |
| DiSlice escn_debug_abbv_alt, DiSlice escn_debug_line_alt, |
| DiSlice escn_debug_str_alt |
| ) |
| { |
| volatile Int jumped; |
| volatile Bool td3 = di->trace_symtab; |
| |
| /* Run the _wrk function to read the dwarf3. If it succeeds, it |
| just returns normally. If there is any failure, it longjmp's |
| back here, having first set d3rd_jmpbuf_reason to something |
| useful. */ |
| vg_assert(d3rd_jmpbuf_valid == False); |
| vg_assert(d3rd_jmpbuf_reason == NULL); |
| |
| d3rd_jmpbuf_valid = True; |
| jumped = VG_MINIMAL_SETJMP(d3rd_jmpbuf); |
| if (jumped == 0) { |
| /* try this ... */ |
| new_dwarf3_reader_wrk( di, barf, |
| escn_debug_info, escn_debug_types, |
| escn_debug_abbv, escn_debug_line, |
| escn_debug_str, escn_debug_ranges, |
| escn_debug_loc, escn_debug_info_alt, |
| escn_debug_abbv_alt, escn_debug_line_alt, |
| escn_debug_str_alt ); |
| d3rd_jmpbuf_valid = False; |
| TRACE_D3("\n------ .debug_info reading was successful ------\n"); |
| } else { |
| /* It longjmp'd. */ |
| d3rd_jmpbuf_valid = False; |
| /* Can't longjump without giving some sort of reason. */ |
| vg_assert(d3rd_jmpbuf_reason != NULL); |
| |
| TRACE_D3("\n------ .debug_info reading failed ------\n"); |
| |
| ML_(symerr)(di, True, d3rd_jmpbuf_reason); |
| } |
| |
| d3rd_jmpbuf_valid = False; |
| d3rd_jmpbuf_reason = NULL; |
| } |
| |
| |
| |
| /* --- Unused code fragments which might be useful one day. --- */ |
| |
| #if 0 |
| /* Read the arange tables */ |
| TRACE_SYMTAB("\n"); |
| TRACE_SYMTAB("\n------ The contents of .debug_arange ------\n"); |
| init_Cursor( &aranges, debug_aranges_img, |
| debug_aranges_sz, 0, barf, |
| "Overrun whilst reading .debug_aranges section" ); |
| while (True) { |
| ULong len, d_i_offset; |
| Bool is64; |
| UShort version; |
| UChar asize, segsize; |
| |
| if (is_at_end_Cursor( &aranges )) |
| break; |
| /* Read one arange thingy */ |
| /* initial_length field */ |
| len = get_Initial_Length( &is64, &aranges, |
| "in .debug_aranges: invalid initial-length field" ); |
| version = get_UShort( &aranges ); |
| d_i_offset = get_Dwarfish_UWord( &aranges, is64 ); |
| asize = get_UChar( &aranges ); |
| segsize = get_UChar( &aranges ); |
| TRACE_D3(" Length: %llu\n", len); |
| TRACE_D3(" Version: %d\n", (Int)version); |
| TRACE_D3(" Offset into .debug_info: %llx\n", d_i_offset); |
| TRACE_D3(" Pointer Size: %d\n", (Int)asize); |
| TRACE_D3(" Segment Size: %d\n", (Int)segsize); |
| TRACE_D3("\n"); |
| TRACE_D3(" Address Length\n"); |
| |
| while ((get_position_of_Cursor( &aranges ) % (2 * asize)) > 0) { |
| (void)get_UChar( & aranges ); |
| } |
| while (True) { |
| ULong address = get_Dwarfish_UWord( &aranges, asize==8 ); |
| ULong length = get_Dwarfish_UWord( &aranges, asize==8 ); |
| TRACE_D3(" 0x%016llx 0x%llx\n", address, length); |
| if (address == 0 && length == 0) break; |
| } |
| } |
| TRACE_SYMTAB("\n"); |
| #endif |
| |
| #endif // defined(VGO_linux) || defined(VGO_darwin) |
| |
| /*--------------------------------------------------------------------*/ |
| /*--- end ---*/ |
| /*--------------------------------------------------------------------*/ |