diff --git a/services/camera/libcameraservice/Camera2Client.cpp b/services/camera/libcameraservice/Camera2Client.cpp
index 9421a77..eae7461 100644
--- a/services/camera/libcameraservice/Camera2Client.cpp
+++ b/services/camera/libcameraservice/Camera2Client.cpp
@@ -135,6 +135,7 @@
 
 Camera2Client::~Camera2Client() {
     ATRACE_CALL();
+    ALOGV("~Camera2Client");
 
     mDestructionStarted = true;
 
@@ -369,6 +370,12 @@
 
     ALOGV("Camera %d: Shutting down", mCameraId);
 
+    /**
+     * disconnect() cannot call any methods that might need to promote a
+     * wp<Camera2Client>, since disconnect can be called from the destructor, at
+     * which point all such promotions will fail.
+     */
+
     stopPreviewL();
 
     {
@@ -538,7 +545,12 @@
             break;
         case Parameters::PREVIEW:
             // Already running preview - need to stop and create a new stream
-            mStreamingProcessor->stopStream();
+            res = stopStream();
+            if (res != OK) {
+                ALOGE("%s: Unable to stop preview to swap windows: %s (%d)",
+                        __FUNCTION__, strerror(-res), res);
+                return res;
+            }
             state = Parameters::WAITING_FOR_PREVIEW_WINDOW;
             break;
     }
@@ -745,7 +757,11 @@
             // no break
         case Parameters::RECORD:
         case Parameters::PREVIEW:
-            mStreamingProcessor->stopStream();
+            res = stopStream();
+            if (res != OK) {
+                ALOGE("%s: Camera %d: Can't stop streaming: %s (%d)",
+                        __FUNCTION__, mCameraId, strerror(-res), res);
+            }
             res = mDevice->waitUntilDrained();
             if (res != OK) {
                 ALOGE("%s: Camera %d: Waiting to stop streaming failed: %s (%d)",
diff --git a/services/camera/libcameraservice/Camera2Device.cpp b/services/camera/libcameraservice/Camera2Device.cpp
index 946cdba..77df152 100644
--- a/services/camera/libcameraservice/Camera2Device.cpp
+++ b/services/camera/libcameraservice/Camera2Device.cpp
@@ -1133,7 +1133,8 @@
 status_t Camera2Device::StreamAdapter::release() {
     ATRACE_CALL();
     status_t res;
-    ALOGV("%s: Releasing stream %d", __FUNCTION__, mId);
+    ALOGV("%s: Releasing stream %d (%d x %d, format %d)", __FUNCTION__, mId,
+            mWidth, mHeight, mFormat);
     if (mState >= ALLOCATED) {
         res = mHal2Device->ops->release_stream(mHal2Device, mId);
         if (res != OK) {
diff --git a/services/camera/libcameraservice/CameraService.cpp b/services/camera/libcameraservice/CameraService.cpp
index 2db5224..cdeb92e 100644
--- a/services/camera/libcameraservice/CameraService.cpp
+++ b/services/camera/libcameraservice/CameraService.cpp
@@ -793,6 +793,7 @@
 
 // tear down the client
 CameraService::Client::~Client() {
+    ALOGV("~Client");
     mDestructionStarted = true;
 
     mCameraService->releaseSound();
@@ -820,10 +821,12 @@
 }
 
 CameraService::BasicClient::~BasicClient() {
+    ALOGV("~BasicClient");
     mDestructionStarted = true;
 }
 
 void CameraService::BasicClient::disconnect() {
+    ALOGV("BasicClient::disconnect");
     mCameraService->removeClientByRemote(mRemoteBinder);
     // client shouldn't be able to call into us anymore
     mClientPid = 0;
@@ -922,6 +925,7 @@
 
 // NOTE: function is idempotent
 void CameraService::Client::disconnect() {
+    ALOGV("Client::disconnect");
     BasicClient::disconnect();
     mCameraService->setCameraFree(mCameraId);
     mCameraService->updateStatus(ICameraServiceListener::STATUS_PRESENT,
diff --git a/services/camera/libcameraservice/camera2/CallbackProcessor.cpp b/services/camera/libcameraservice/camera2/CallbackProcessor.cpp
index 30c14ef..dd37283 100644
--- a/services/camera/libcameraservice/camera2/CallbackProcessor.cpp
+++ b/services/camera/libcameraservice/camera2/CallbackProcessor.cpp
@@ -30,9 +30,11 @@
 namespace android {
 namespace camera2 {
 
-CallbackProcessor::CallbackProcessor(wp<Camera2Client> client):
+CallbackProcessor::CallbackProcessor(sp<Camera2Client> client):
         Thread(false),
         mClient(client),
+        mDevice(client->getCameraDevice()),
+        mId(client->getCameraId()),
         mCallbackAvailable(false),
         mCallbackStreamId(NO_STREAM) {
 }
@@ -56,9 +58,11 @@
 
     Mutex::Autolock l(mInputMutex);
 
-    sp<Camera2Client> client = mClient.promote();
-    if (client == 0) return OK;
-    sp<CameraDeviceBase> device = client->getCameraDevice();
+    sp<CameraDeviceBase> device = mDevice.promote();
+    if (device == 0) {
+        ALOGE("%s: Camera %d: Device does not exist", __FUNCTION__, mId);
+        return INVALID_OPERATION;
+    }
 
     if (mCallbackConsumer == 0) {
         // Create CPU buffer queue endpoint
@@ -76,7 +80,7 @@
                 &currentWidth, &currentHeight, &currentFormat);
         if (res != OK) {
             ALOGE("%s: Camera %d: Error querying callback output stream info: "
-                    "%s (%d)", __FUNCTION__, client->getCameraId(),
+                    "%s (%d)", __FUNCTION__, mId,
                     strerror(-res), res);
             return res;
         }
@@ -87,11 +91,11 @@
             // assuming that all existing use of old callback stream is
             // completed.
             ALOGV("%s: Camera %d: Deleting stream %d since the buffer dimensions changed",
-                __FUNCTION__, client->getCameraId(), mCallbackStreamId);
+                __FUNCTION__, mId, mCallbackStreamId);
             res = device->deleteStream(mCallbackStreamId);
             if (res != OK) {
                 ALOGE("%s: Camera %d: Unable to delete old output stream "
-                        "for callbacks: %s (%d)", __FUNCTION__, client->getCameraId(),
+                        "for callbacks: %s (%d)", __FUNCTION__, mId,
                         strerror(-res), res);
                 return res;
             }
@@ -108,7 +112,7 @@
                 params.previewFormat, 0, &mCallbackStreamId);
         if (res != OK) {
             ALOGE("%s: Camera %d: Can't create output stream for callbacks: "
-                    "%s (%d)", __FUNCTION__, client->getCameraId(),
+                    "%s (%d)", __FUNCTION__, mId,
                     strerror(-res), res);
             return res;
         }
@@ -119,15 +123,24 @@
 
 status_t CallbackProcessor::deleteStream() {
     ATRACE_CALL();
+    sp<CameraDeviceBase> device;
 
-    Mutex::Autolock l(mInputMutex);
+    {
+        Mutex::Autolock l(mInputMutex);
 
-    if (mCallbackStreamId != NO_STREAM) {
-        sp<Camera2Client> client = mClient.promote();
-        if (client == 0) return OK;
-        sp<CameraDeviceBase> device = client->getCameraDevice();
+        if (mCallbackStreamId == NO_STREAM) {
+            return OK;
+        }
+        device = mDevice.promote();
+        if (device == 0) {
+            ALOGE("%s: Camera %d: Device does not exist", __FUNCTION__, mId);
+            return INVALID_OPERATION;
+        }
+    }
+    device->deleteStream(mCallbackStreamId);
 
-        device->deleteStream(mCallbackStreamId);
+    {
+        Mutex::Autolock l(mInputMutex);
 
         mCallbackHeap.clear();
         mCallbackWindow.clear();
@@ -161,13 +174,32 @@
 
     do {
         sp<Camera2Client> client = mClient.promote();
-        if (client == 0) return false;
-        res = processNewCallback(client);
+        if (client == 0) {
+            res = discardNewCallback();
+        } else {
+            res = processNewCallback(client);
+        }
     } while (res == OK);
 
     return true;
 }
 
+status_t CallbackProcessor::discardNewCallback() {
+    ATRACE_CALL();
+    status_t res;
+    CpuConsumer::LockedBuffer imgBuffer;
+    res = mCallbackConsumer->lockNextBuffer(&imgBuffer);
+    if (res != OK) {
+        if (res != BAD_VALUE) {
+            ALOGE("%s: Camera %d: Error receiving next callback buffer: "
+                    "%s (%d)", __FUNCTION__, mId, strerror(-res), res);
+        }
+        return res;
+    }
+    mCallbackConsumer->unlockBuffer(imgBuffer);
+    return OK;
+}
+
 status_t CallbackProcessor::processNewCallback(sp<Camera2Client> &client) {
     ATRACE_CALL();
     status_t res;
@@ -181,12 +213,12 @@
     if (res != OK) {
         if (res != BAD_VALUE) {
             ALOGE("%s: Camera %d: Error receiving next callback buffer: "
-                    "%s (%d)", __FUNCTION__, client->getCameraId(), strerror(-res), res);
+                    "%s (%d)", __FUNCTION__, mId, strerror(-res), res);
         }
         return res;
     }
     ALOGV("%s: Camera %d: Preview callback available", __FUNCTION__,
-            client->getCameraId());
+            mId);
 
     {
         SharedParameters::Lock l(client->getParameters());
@@ -195,7 +227,7 @@
                 && l.mParameters.state != Parameters::RECORD
                 && l.mParameters.state != Parameters::VIDEO_SNAPSHOT) {
             ALOGV("%s: Camera %d: No longer streaming",
-                    __FUNCTION__, client->getCameraId());
+                    __FUNCTION__, mId);
             mCallbackConsumer->unlockBuffer(imgBuffer);
             return OK;
         }
@@ -216,7 +248,7 @@
 
         if (imgBuffer.format != l.mParameters.previewFormat) {
             ALOGE("%s: Camera %d: Unexpected format for callback: "
-                    "%x, expected %x", __FUNCTION__, client->getCameraId(),
+                    "%x, expected %x", __FUNCTION__, mId,
                     imgBuffer.format, l.mParameters.previewFormat);
             mCallbackConsumer->unlockBuffer(imgBuffer);
             return INVALID_OPERATION;
@@ -241,7 +273,7 @@
                 "Camera2Client::CallbackHeap");
         if (mCallbackHeap->mHeap->getSize() == 0) {
             ALOGE("%s: Camera %d: Unable to allocate memory for callbacks",
-                    __FUNCTION__, client->getCameraId());
+                    __FUNCTION__, mId);
             mCallbackConsumer->unlockBuffer(imgBuffer);
             return INVALID_OPERATION;
         }
@@ -252,7 +284,7 @@
 
     if (mCallbackHeapFree == 0) {
         ALOGE("%s: Camera %d: No free callback buffers, dropping frame",
-                __FUNCTION__, client->getCameraId());
+                __FUNCTION__, mId);
         mCallbackConsumer->unlockBuffer(imgBuffer);
         return OK;
     }
@@ -282,7 +314,7 @@
             l(client->mSharedCameraCallbacks);
         if (l.mRemoteCallback != 0) {
             ALOGV("%s: Camera %d: Invoking client data callback",
-                    __FUNCTION__, client->getCameraId());
+                    __FUNCTION__, mId);
             l.mRemoteCallback->dataCallback(CAMERA_MSG_PREVIEW_FRAME,
                     mCallbackHeap->mBuffers[heapIdx], NULL);
         }
diff --git a/services/camera/libcameraservice/camera2/CallbackProcessor.h b/services/camera/libcameraservice/camera2/CallbackProcessor.h
index e68bb75..1c40a03 100644
--- a/services/camera/libcameraservice/camera2/CallbackProcessor.h
+++ b/services/camera/libcameraservice/camera2/CallbackProcessor.h
@@ -30,6 +30,7 @@
 namespace android {
 
 class Camera2Client;
+class CameraDeviceBase;
 
 namespace camera2 {
 
@@ -39,7 +40,7 @@
 class CallbackProcessor:
             public Thread, public CpuConsumer::FrameAvailableListener {
   public:
-    CallbackProcessor(wp<Camera2Client> client);
+    CallbackProcessor(sp<Camera2Client> client);
     ~CallbackProcessor();
 
     void onFrameAvailable();
@@ -52,6 +53,8 @@
   private:
     static const nsecs_t kWaitDuration = 10000000; // 10 ms
     wp<Camera2Client> mClient;
+    wp<CameraDeviceBase> mDevice;
+    int mId;
 
     mutable Mutex mInputMutex;
     bool mCallbackAvailable;
@@ -72,7 +75,8 @@
     virtual bool threadLoop();
 
     status_t processNewCallback(sp<Camera2Client> &client);
-
+    // Used when shutting down
+    status_t discardNewCallback();
 };
 
 
diff --git a/services/camera/libcameraservice/camera2/JpegProcessor.cpp b/services/camera/libcameraservice/camera2/JpegProcessor.cpp
index 286fac4..01d7f9c 100644
--- a/services/camera/libcameraservice/camera2/JpegProcessor.cpp
+++ b/services/camera/libcameraservice/camera2/JpegProcessor.cpp
@@ -35,11 +35,12 @@
 namespace camera2 {
 
 JpegProcessor::JpegProcessor(
-    wp<Camera2Client> client,
+    sp<Camera2Client> client,
     wp<CaptureSequencer> sequencer):
         Thread(false),
-        mClient(client),
+        mDevice(client->getCameraDevice()),
         mSequencer(sequencer),
+        mId(client->getCameraId()),
         mCaptureAvailable(false),
         mCaptureStreamId(NO_STREAM) {
 }
@@ -64,16 +65,18 @@
 
     Mutex::Autolock l(mInputMutex);
 
-    sp<Camera2Client> client = mClient.promote();
-    if (client == 0) return OK;
-    sp<CameraDeviceBase> device = client->getCameraDevice();
+    sp<CameraDeviceBase> device = mDevice.promote();
+    if (device == 0) {
+        ALOGE("%s: Camera %d: Device does not exist", __FUNCTION__, mId);
+        return INVALID_OPERATION;
+    }
 
     // Find out buffer size for JPEG
     camera_metadata_ro_entry_t maxJpegSize =
             params.staticInfo(ANDROID_JPEG_MAX_SIZE);
     if (maxJpegSize.count == 0) {
         ALOGE("%s: Camera %d: Can't find ANDROID_JPEG_MAX_SIZE!",
-                __FUNCTION__, client->getCameraId());
+                __FUNCTION__, mId);
         return INVALID_OPERATION;
     }
 
@@ -89,7 +92,7 @@
                                        "Camera2Client::CaptureHeap");
         if (mCaptureHeap->getSize() == 0) {
             ALOGE("%s: Camera %d: Unable to allocate memory for capture",
-                    __FUNCTION__, client->getCameraId());
+                    __FUNCTION__, mId);
             return NO_MEMORY;
         }
     }
@@ -102,18 +105,18 @@
         if (res != OK) {
             ALOGE("%s: Camera %d: Error querying capture output stream info: "
                     "%s (%d)", __FUNCTION__,
-                    client->getCameraId(), strerror(-res), res);
+                    mId, strerror(-res), res);
             return res;
         }
         if (currentWidth != (uint32_t)params.pictureWidth ||
                 currentHeight != (uint32_t)params.pictureHeight) {
             ALOGV("%s: Camera %d: Deleting stream %d since the buffer dimensions changed",
-                __FUNCTION__, client->getCameraId(), mCaptureStreamId);
+                __FUNCTION__, mId, mCaptureStreamId);
             res = device->deleteStream(mCaptureStreamId);
             if (res != OK) {
                 ALOGE("%s: Camera %d: Unable to delete old output stream "
                         "for capture: %s (%d)", __FUNCTION__,
-                        client->getCameraId(), strerror(-res), res);
+                        mId, strerror(-res), res);
                 return res;
             }
             mCaptureStreamId = NO_STREAM;
@@ -128,7 +131,7 @@
                 &mCaptureStreamId);
         if (res != OK) {
             ALOGE("%s: Camera %d: Can't create output stream for capture: "
-                    "%s (%d)", __FUNCTION__, client->getCameraId(),
+                    "%s (%d)", __FUNCTION__, mId,
                     strerror(-res), res);
             return res;
         }
@@ -143,9 +146,11 @@
     Mutex::Autolock l(mInputMutex);
 
     if (mCaptureStreamId != NO_STREAM) {
-        sp<Camera2Client> client = mClient.promote();
-        if (client == 0) return OK;
-        sp<CameraDeviceBase> device = client->getCameraDevice();
+        sp<CameraDeviceBase> device = mDevice.promote();
+        if (device == 0) {
+            ALOGE("%s: Camera %d: Device does not exist", __FUNCTION__, mId);
+            return INVALID_OPERATION;
+        }
 
         device->deleteStream(mCaptureStreamId);
 
@@ -180,15 +185,13 @@
     }
 
     do {
-        sp<Camera2Client> client = mClient.promote();
-        if (client == 0) return false;
-        res = processNewCapture(client);
+        res = processNewCapture();
     } while (res == OK);
 
     return true;
 }
 
-status_t JpegProcessor::processNewCapture(sp<Camera2Client> &client) {
+status_t JpegProcessor::processNewCapture() {
     ATRACE_CALL();
     status_t res;
     sp<Camera2Heap> captureHeap;
@@ -200,17 +203,17 @@
         if (res != BAD_VALUE) {
             ALOGE("%s: Camera %d: Error receiving still image buffer: "
                     "%s (%d)", __FUNCTION__,
-                    client->getCameraId(), strerror(-res), res);
+                    mId, strerror(-res), res);
         }
         return res;
     }
 
     ALOGV("%s: Camera %d: Still capture available", __FUNCTION__,
-            client->getCameraId());
+            mId);
 
     if (imgBuffer.format != HAL_PIXEL_FORMAT_BLOB) {
         ALOGE("%s: Camera %d: Unexpected format for still image: "
-                "%x, expected %x", __FUNCTION__, client->getCameraId(),
+                "%x, expected %x", __FUNCTION__, mId,
                 imgBuffer.format,
                 HAL_PIXEL_FORMAT_BLOB);
         mCaptureConsumer->unlockBuffer(imgBuffer);
diff --git a/services/camera/libcameraservice/camera2/JpegProcessor.h b/services/camera/libcameraservice/camera2/JpegProcessor.h
index 74f4738..a38611c 100644
--- a/services/camera/libcameraservice/camera2/JpegProcessor.h
+++ b/services/camera/libcameraservice/camera2/JpegProcessor.h
@@ -29,6 +29,7 @@
 namespace android {
 
 class Camera2Client;
+class CameraDeviceBase;
 class MemoryHeapBase;
 
 namespace camera2 {
@@ -41,7 +42,7 @@
 class JpegProcessor:
             public Thread, public CpuConsumer::FrameAvailableListener {
   public:
-    JpegProcessor(wp<Camera2Client> client, wp<CaptureSequencer> sequencer);
+    JpegProcessor(sp<Camera2Client> client, wp<CaptureSequencer> sequencer);
     ~JpegProcessor();
 
     // CpuConsumer listener implementation
@@ -54,8 +55,9 @@
     void dump(int fd, const Vector<String16>& args) const;
   private:
     static const nsecs_t kWaitDuration = 10000000; // 10 ms
-    wp<Camera2Client> mClient;
+    wp<CameraDeviceBase> mDevice;
     wp<CaptureSequencer> mSequencer;
+    int mId;
 
     mutable Mutex mInputMutex;
     bool mCaptureAvailable;
@@ -72,7 +74,7 @@
 
     virtual bool threadLoop();
 
-    status_t processNewCapture(sp<Camera2Client> &client);
+    status_t processNewCapture();
     size_t findJpegSize(uint8_t* jpegBuffer, size_t maxSize);
 
 };
diff --git a/services/camera/libcameraservice/camera2/StreamingProcessor.cpp b/services/camera/libcameraservice/camera2/StreamingProcessor.cpp
index fbc5b93..c36cf87 100644
--- a/services/camera/libcameraservice/camera2/StreamingProcessor.cpp
+++ b/services/camera/libcameraservice/camera2/StreamingProcessor.cpp
@@ -31,8 +31,10 @@
 namespace android {
 namespace camera2 {
 
-StreamingProcessor::StreamingProcessor(wp<Camera2Client> client):
+StreamingProcessor::StreamingProcessor(sp<Camera2Client> client):
         mClient(client),
+        mDevice(client->getCameraDevice()),
+        mId(client->getCameraId()),
         mActiveRequest(NONE),
         mPreviewRequestId(Camera2Client::kPreviewRequestIdStart),
         mPreviewStreamId(NO_STREAM),
@@ -40,7 +42,6 @@
         mRecordingStreamId(NO_STREAM),
         mRecordingHeapCount(kDefaultRecordingHeapCount)
 {
-
 }
 
 StreamingProcessor::~StreamingProcessor() {
@@ -70,16 +71,19 @@
 status_t StreamingProcessor::updatePreviewRequest(const Parameters &params) {
     ATRACE_CALL();
     status_t res;
-    sp<Camera2Client> client = mClient.promote();
-    if (client == 0) return INVALID_OPERATION;
+    sp<CameraDeviceBase> device = mDevice.promote();
+    if (device == 0) {
+        ALOGE("%s: Camera %d: Device does not exist", __FUNCTION__, mId);
+        return INVALID_OPERATION;
+    }
 
     Mutex::Autolock m(mMutex);
     if (mPreviewRequest.entryCount() == 0) {
-        res = client->getCameraDevice()->createDefaultRequest(CAMERA2_TEMPLATE_PREVIEW,
+        res = device->createDefaultRequest(CAMERA2_TEMPLATE_PREVIEW,
                 &mPreviewRequest);
         if (res != OK) {
             ALOGE("%s: Camera %d: Unable to create default preview request: "
-                    "%s (%d)", __FUNCTION__, client->getCameraId(), strerror(-res), res);
+                    "%s (%d)", __FUNCTION__, mId, strerror(-res), res);
             return res;
         }
     }
@@ -87,7 +91,7 @@
     res = params.updateRequest(&mPreviewRequest);
     if (res != OK) {
         ALOGE("%s: Camera %d: Unable to update common entries of preview "
-                "request: %s (%d)", __FUNCTION__, client->getCameraId(),
+                "request: %s (%d)", __FUNCTION__, mId,
                 strerror(-res), res);
         return res;
     }
@@ -96,7 +100,7 @@
             &mPreviewRequestId, 1);
     if (res != OK) {
         ALOGE("%s: Camera %d: Unable to update request id for preview: %s (%d)",
-                __FUNCTION__, client->getCameraId(), strerror(-res), res);
+                __FUNCTION__, mId, strerror(-res), res);
         return res;
     }
 
@@ -108,9 +112,11 @@
     Mutex::Autolock m(mMutex);
 
     status_t res;
-    sp<Camera2Client> client = mClient.promote();
-    if (client == 0) return INVALID_OPERATION;
-    sp<CameraDeviceBase> device = client->getCameraDevice();
+    sp<CameraDeviceBase> device = mDevice.promote();
+    if (device == 0) {
+        ALOGE("%s: Camera %d: Device does not exist", __FUNCTION__, mId);
+        return INVALID_OPERATION;
+    }
 
     if (mPreviewStreamId != NO_STREAM) {
         // Check if stream parameters have to change
@@ -119,24 +125,24 @@
                 &currentWidth, &currentHeight, 0);
         if (res != OK) {
             ALOGE("%s: Camera %d: Error querying preview stream info: "
-                    "%s (%d)", __FUNCTION__, client->getCameraId(), strerror(-res), res);
+                    "%s (%d)", __FUNCTION__, mId, strerror(-res), res);
             return res;
         }
         if (currentWidth != (uint32_t)params.previewWidth ||
                 currentHeight != (uint32_t)params.previewHeight) {
             ALOGV("%s: Camera %d: Preview size switch: %d x %d -> %d x %d",
-                    __FUNCTION__, client->getCameraId(), currentWidth, currentHeight,
+                    __FUNCTION__, mId, currentWidth, currentHeight,
                     params.previewWidth, params.previewHeight);
             res = device->waitUntilDrained();
             if (res != OK) {
                 ALOGE("%s: Camera %d: Error waiting for preview to drain: "
-                        "%s (%d)", __FUNCTION__, client->getCameraId(), strerror(-res), res);
+                        "%s (%d)", __FUNCTION__, mId, strerror(-res), res);
                 return res;
             }
             res = device->deleteStream(mPreviewStreamId);
             if (res != OK) {
                 ALOGE("%s: Camera %d: Unable to delete old output stream "
-                        "for preview: %s (%d)", __FUNCTION__, client->getCameraId(),
+                        "for preview: %s (%d)", __FUNCTION__, mId,
                         strerror(-res), res);
                 return res;
             }
@@ -151,7 +157,7 @@
                 &mPreviewStreamId);
         if (res != OK) {
             ALOGE("%s: Camera %d: Unable to create preview stream: %s (%d)",
-                    __FUNCTION__, client->getCameraId(), strerror(-res), res);
+                    __FUNCTION__, mId, strerror(-res), res);
             return res;
         }
     }
@@ -160,7 +166,7 @@
             params.previewTransform);
     if (res != OK) {
         ALOGE("%s: Camera %d: Unable to set preview stream transform: "
-                "%s (%d)", __FUNCTION__, client->getCameraId(), strerror(-res), res);
+                "%s (%d)", __FUNCTION__, mId, strerror(-res), res);
         return res;
     }
 
@@ -174,12 +180,14 @@
     Mutex::Autolock m(mMutex);
 
     if (mPreviewStreamId != NO_STREAM) {
-        sp<Camera2Client> client = mClient.promote();
-        if (client == 0) return INVALID_OPERATION;
-        sp<CameraDeviceBase> device = client->getCameraDevice();
+        sp<CameraDeviceBase> device = mDevice.promote();
+        if (device == 0) {
+            ALOGE("%s: Camera %d: Device does not exist", __FUNCTION__, mId);
+            return INVALID_OPERATION;
+        }
 
         ALOGV("%s: for cameraId %d on streamId %d",
-            __FUNCTION__, client->getCameraId(), mPreviewStreamId);
+            __FUNCTION__, mId, mPreviewStreamId);
 
         res = device->waitUntilDrained();
         if (res != OK) {
@@ -206,11 +214,9 @@
 status_t StreamingProcessor::setRecordingBufferCount(size_t count) {
     ATRACE_CALL();
     // 32 is the current upper limit on the video buffer count for BufferQueue
-    sp<Camera2Client> client = mClient.promote();
-    if (client == 0) return INVALID_OPERATION;
     if (count > 32) {
         ALOGE("%s: Camera %d: Error setting %d as video buffer count value",
-                __FUNCTION__, client->getCameraId(), count);
+                __FUNCTION__, mId, count);
         return BAD_VALUE;
     }
 
@@ -233,15 +239,18 @@
     status_t res;
     Mutex::Autolock m(mMutex);
 
-    sp<Camera2Client> client = mClient.promote();
-    if (client == 0) return INVALID_OPERATION;
+    sp<CameraDeviceBase> device = mDevice.promote();
+    if (device == 0) {
+        ALOGE("%s: Camera %d: Device does not exist", __FUNCTION__, mId);
+        return INVALID_OPERATION;
+    }
 
     if (mRecordingRequest.entryCount() == 0) {
-        res = client->getCameraDevice()->createDefaultRequest(CAMERA2_TEMPLATE_VIDEO_RECORD,
+        res = device->createDefaultRequest(CAMERA2_TEMPLATE_VIDEO_RECORD,
                 &mRecordingRequest);
         if (res != OK) {
             ALOGE("%s: Camera %d: Unable to create default recording request:"
-                    " %s (%d)", __FUNCTION__, client->getCameraId(), strerror(-res), res);
+                    " %s (%d)", __FUNCTION__, mId, strerror(-res), res);
             return res;
         }
     }
@@ -249,7 +258,7 @@
     res = params.updateRequest(&mRecordingRequest);
     if (res != OK) {
         ALOGE("%s: Camera %d: Unable to update common entries of recording "
-                "request: %s (%d)", __FUNCTION__, client->getCameraId(),
+                "request: %s (%d)", __FUNCTION__, mId,
                 strerror(-res), res);
         return res;
     }
@@ -258,7 +267,7 @@
             &mRecordingRequestId, 1);
     if (res != OK) {
         ALOGE("%s: Camera %d: Unable to update request id for request: %s (%d)",
-                __FUNCTION__, client->getCameraId(), strerror(-res), res);
+                __FUNCTION__, mId, strerror(-res), res);
         return res;
     }
 
@@ -270,9 +279,11 @@
     status_t res;
     Mutex::Autolock m(mMutex);
 
-    sp<Camera2Client> client = mClient.promote();
-    if (client == 0) return INVALID_OPERATION;
-    sp<CameraDeviceBase> device = client->getCameraDevice();
+    sp<CameraDeviceBase> device = mDevice.promote();
+    if (device == 0) {
+        ALOGE("%s: Camera %d: Device does not exist", __FUNCTION__, mId);
+        return INVALID_OPERATION;
+    }
 
     if (mRecordingConsumer == 0) {
         // Create CPU buffer queue endpoint. We need one more buffer here so that we can
@@ -296,7 +307,7 @@
                 &currentWidth, &currentHeight, 0);
         if (res != OK) {
             ALOGE("%s: Camera %d: Error querying recording output stream info: "
-                    "%s (%d)", __FUNCTION__, client->getCameraId(),
+                    "%s (%d)", __FUNCTION__, mId,
                     strerror(-res), res);
             return res;
         }
@@ -307,7 +318,7 @@
             if (res != OK) {
                 ALOGE("%s: Camera %d: Unable to delete old output stream "
                         "for recording: %s (%d)", __FUNCTION__,
-                        client->getCameraId(), strerror(-res), res);
+                        mId, strerror(-res), res);
                 return res;
             }
             mRecordingStreamId = NO_STREAM;
@@ -321,7 +332,7 @@
                 CAMERA2_HAL_PIXEL_FORMAT_OPAQUE, 0, &mRecordingStreamId);
         if (res != OK) {
             ALOGE("%s: Camera %d: Can't create output stream for recording: "
-                    "%s (%d)", __FUNCTION__, client->getCameraId(),
+                    "%s (%d)", __FUNCTION__, mId,
                     strerror(-res), res);
             return res;
         }
@@ -337,9 +348,11 @@
     Mutex::Autolock m(mMutex);
 
     if (mRecordingStreamId != NO_STREAM) {
-        sp<Camera2Client> client = mClient.promote();
-        if (client == 0) return INVALID_OPERATION;
-        sp<CameraDeviceBase> device = client->getCameraDevice();
+        sp<CameraDeviceBase> device = mDevice.promote();
+        if (device == 0) {
+            ALOGE("%s: Camera %d: Device does not exist", __FUNCTION__, mId);
+            return INVALID_OPERATION;
+        }
 
         res = device->waitUntilDrained();
         if (res != OK) {
@@ -369,10 +382,13 @@
 
     if (type == NONE) return INVALID_OPERATION;
 
-    sp<Camera2Client> client = mClient.promote();
-    if (client == 0) return INVALID_OPERATION;
+    sp<CameraDeviceBase> device = mDevice.promote();
+    if (device == 0) {
+        ALOGE("%s: Camera %d: Device does not exist", __FUNCTION__, mId);
+        return INVALID_OPERATION;
+    }
 
-    ALOGV("%s: Camera %d: type = %d", __FUNCTION__, client->getCameraId(), type);
+    ALOGV("%s: Camera %d: type = %d", __FUNCTION__, mId, type);
 
     Mutex::Autolock m(mMutex);
 
@@ -384,22 +400,22 @@
         outputStreams);
     if (res != OK) {
         ALOGE("%s: Camera %d: Unable to set up preview request: %s (%d)",
-                __FUNCTION__, client->getCameraId(), strerror(-res), res);
+                __FUNCTION__, mId, strerror(-res), res);
         return res;
     }
 
     res = request.sort();
     if (res != OK) {
         ALOGE("%s: Camera %d: Error sorting preview request: %s (%d)",
-                __FUNCTION__, client->getCameraId(), strerror(-res), res);
+                __FUNCTION__, mId, strerror(-res), res);
         return res;
     }
 
-    res = client->getCameraDevice()->setStreamingRequest(request);
+    res = device->setStreamingRequest(request);
     if (res != OK) {
         ALOGE("%s: Camera %d: Unable to set preview request to start preview: "
                 "%s (%d)",
-                __FUNCTION__, client->getCameraId(), strerror(-res), res);
+                __FUNCTION__, mId, strerror(-res), res);
         return res;
     }
     mActiveRequest = type;
@@ -413,16 +429,19 @@
 
     Mutex::Autolock m(mMutex);
 
-    sp<Camera2Client> client = mClient.promote();
-    if (client == 0) return INVALID_OPERATION;
-    sp<CameraDeviceBase> device = client->getCameraDevice();
+    sp<CameraDeviceBase> device = mDevice.promote();
+    if (device == 0) {
+        ALOGE("%s: Camera %d: Device does not exist", __FUNCTION__, mId);
+        return INVALID_OPERATION;
+    }
 
     res = device->clearStreamingRequest();
     if (res != OK) {
         ALOGE("%s: Camera %d: Can't clear stream request: %s (%d)",
-                __FUNCTION__, client->getCameraId(), strerror(-res), res);
+                __FUNCTION__, mId, strerror(-res), res);
         return res;
     }
+
     mActiveRequest = NONE;
 
     return OK;
@@ -466,7 +485,18 @@
     nsecs_t timestamp;
 
     sp<Camera2Client> client = mClient.promote();
-    if (client == 0) return;
+    if (client == 0) {
+        // Discard frames during shutdown
+        BufferItemConsumer::BufferItem imgBuffer;
+        res = mRecordingConsumer->acquireBuffer(&imgBuffer);
+        if (res != OK) {
+            ALOGE("%s: Camera %d: Error receiving recording buffer: %s (%d)",
+                    __FUNCTION__, mId, strerror(-res), res);
+            return;
+        }
+        mRecordingConsumer->releaseBuffer(imgBuffer);
+        return;
+    }
 
     {
         /* acquire SharedParameters before mMutex so we don't dead lock
@@ -477,7 +507,7 @@
         res = mRecordingConsumer->acquireBuffer(&imgBuffer);
         if (res != OK) {
             ALOGE("%s: Camera %d: Error receiving recording buffer: %s (%d)",
-                    __FUNCTION__, client->getCameraId(), strerror(-res), res);
+                    __FUNCTION__, mId, strerror(-res), res);
             return;
         }
         timestamp = imgBuffer.mTimestamp;
@@ -490,7 +520,7 @@
                 l.mParameters.state != Parameters::VIDEO_SNAPSHOT) {
             ALOGV("%s: Camera %d: Discarding recording image buffers "
                     "received after recording done", __FUNCTION__,
-                    client->getCameraId());
+                    mId);
             mRecordingConsumer->releaseBuffer(imgBuffer);
             return;
         }
@@ -498,14 +528,14 @@
         if (mRecordingHeap == 0) {
             const size_t bufferSize = 4 + sizeof(buffer_handle_t);
             ALOGV("%s: Camera %d: Creating recording heap with %d buffers of "
-                    "size %d bytes", __FUNCTION__, client->getCameraId(),
+                    "size %d bytes", __FUNCTION__, mId,
                     mRecordingHeapCount, bufferSize);
 
             mRecordingHeap = new Camera2Heap(bufferSize, mRecordingHeapCount,
                     "Camera2Client::RecordingHeap");
             if (mRecordingHeap->mHeap->getSize() == 0) {
                 ALOGE("%s: Camera %d: Unable to allocate memory for recording",
-                        __FUNCTION__, client->getCameraId());
+                        __FUNCTION__, mId);
                 mRecordingConsumer->releaseBuffer(imgBuffer);
                 return;
             }
@@ -513,7 +543,7 @@
                 if (mRecordingBuffers[i].mBuf !=
                         BufferItemConsumer::INVALID_BUFFER_SLOT) {
                     ALOGE("%s: Camera %d: Non-empty recording buffers list!",
-                            __FUNCTION__, client->getCameraId());
+                            __FUNCTION__, mId);
                 }
             }
             mRecordingBuffers.clear();
@@ -526,7 +556,7 @@
 
         if ( mRecordingHeapFree == 0) {
             ALOGE("%s: Camera %d: No free recording buffers, dropping frame",
-                    __FUNCTION__, client->getCameraId());
+                    __FUNCTION__, mId);
             mRecordingConsumer->releaseBuffer(imgBuffer);
             return;
         }
@@ -536,7 +566,7 @@
         mRecordingHeapFree--;
 
         ALOGV("%s: Camera %d: Timestamp %lld",
-                __FUNCTION__, client->getCameraId(), timestamp);
+                __FUNCTION__, mId, timestamp);
 
         ssize_t offset;
         size_t size;
@@ -549,7 +579,7 @@
         *((uint32_t*)data) = type;
         *((buffer_handle_t*)(data + 4)) = imgBuffer.mGraphicBuffer->handle;
         ALOGV("%s: Camera %d: Sending out buffer_handle_t %p",
-                __FUNCTION__, client->getCameraId(),
+                __FUNCTION__, mId,
                 imgBuffer.mGraphicBuffer->handle);
         mRecordingBuffers.replaceAt(imgBuffer, heapIdx);
         recordingHeap = mRecordingHeap;
@@ -568,9 +598,6 @@
     ATRACE_CALL();
     status_t res;
 
-    sp<Camera2Client> client = mClient.promote();
-    if (client == 0) return;
-
     Mutex::Autolock m(mMutex);
     // Make sure this is for the current heap
     ssize_t offset;
@@ -578,7 +605,7 @@
     sp<IMemoryHeap> heap = mem->getMemory(&offset, &size);
     if (heap->getHeapID() != mRecordingHeap->mHeap->getHeapID()) {
         ALOGW("%s: Camera %d: Mismatched heap ID, ignoring release "
-                "(got %x, expected %x)", __FUNCTION__, client->getCameraId(),
+                "(got %x, expected %x)", __FUNCTION__, mId,
                 heap->getHeapID(), mRecordingHeap->mHeap->getHeapID());
         return;
     }
@@ -586,7 +613,7 @@
     uint32_t type = *(uint32_t*)data;
     if (type != kMetadataBufferTypeGrallocSource) {
         ALOGE("%s: Camera %d: Recording frame type invalid (got %x, expected %x)",
-                __FUNCTION__, client->getCameraId(), type,
+                __FUNCTION__, mId, type,
                 kMetadataBufferTypeGrallocSource);
         return;
     }
@@ -606,19 +633,19 @@
     }
     if (itemIndex == mRecordingBuffers.size()) {
         ALOGE("%s: Camera %d: Can't find buffer_handle_t %p in list of "
-                "outstanding buffers", __FUNCTION__, client->getCameraId(),
+                "outstanding buffers", __FUNCTION__, mId,
                 imgHandle);
         return;
     }
 
     ALOGV("%s: Camera %d: Freeing buffer_handle_t %p", __FUNCTION__,
-            client->getCameraId(), imgHandle);
+            mId, imgHandle);
 
     res = mRecordingConsumer->releaseBuffer(mRecordingBuffers[itemIndex]);
     if (res != OK) {
         ALOGE("%s: Camera %d: Unable to free recording frame "
                 "(buffer_handle_t: %p): %s (%d)", __FUNCTION__,
-                client->getCameraId(), imgHandle, strerror(-res), res);
+                mId, imgHandle, strerror(-res), res);
         return;
     }
     mRecordingBuffers.replaceAt(itemIndex);
diff --git a/services/camera/libcameraservice/camera2/StreamingProcessor.h b/services/camera/libcameraservice/camera2/StreamingProcessor.h
index e5732ad..643114e 100644
--- a/services/camera/libcameraservice/camera2/StreamingProcessor.h
+++ b/services/camera/libcameraservice/camera2/StreamingProcessor.h
@@ -27,6 +27,7 @@
 namespace android {
 
 class Camera2Client;
+class CameraDeviceBase;
 class IMemory;
 
 namespace camera2 {
@@ -38,7 +39,7 @@
  */
 class StreamingProcessor: public BufferItemConsumer::FrameAvailableListener {
   public:
-    StreamingProcessor(wp<Camera2Client> client);
+    StreamingProcessor(sp<Camera2Client> client);
     ~StreamingProcessor();
 
     status_t setPreviewWindow(sp<ANativeWindow> window);
@@ -86,6 +87,8 @@
     };
 
     wp<Camera2Client> mClient;
+    wp<CameraDeviceBase> mDevice;
+    int mId;
 
     StreamType mActiveRequest;
 
diff --git a/services/camera/libcameraservice/camera2/ZslProcessor.cpp b/services/camera/libcameraservice/camera2/ZslProcessor.cpp
index 769d9bd..2c12fb0 100644
--- a/services/camera/libcameraservice/camera2/ZslProcessor.cpp
+++ b/services/camera/libcameraservice/camera2/ZslProcessor.cpp
@@ -38,12 +38,14 @@
 namespace camera2 {
 
 ZslProcessor::ZslProcessor(
-    wp<Camera2Client> client,
+    sp<Camera2Client> client,
     wp<CaptureSequencer> sequencer):
         Thread(false),
         mState(RUNNING),
         mClient(client),
+        mDevice(client->getCameraDevice()),
         mSequencer(sequencer),
+        mId(client->getCameraId()),
         mZslBufferAvailable(false),
         mZslStreamId(NO_STREAM),
         mZslReprocessStreamId(NO_STREAM),
@@ -69,7 +71,8 @@
     }
 }
 
-void ZslProcessor::onFrameAvailable(int32_t /*frameId*/, const CameraMetadata &frame) {
+void ZslProcessor::onFrameAvailable(int32_t /*frameId*/,
+        const CameraMetadata &frame) {
     Mutex::Autolock l(mInputMutex);
     camera_metadata_ro_entry_t entry;
     entry = frame.find(ANDROID_SENSOR_TIMESTAMP);
@@ -113,8 +116,15 @@
     Mutex::Autolock l(mInputMutex);
 
     sp<Camera2Client> client = mClient.promote();
-    if (client == 0) return OK;
-    sp<CameraDeviceBase> device = client->getCameraDevice();
+    if (client == 0) {
+        ALOGE("%s: Camera %d: Client does not exist", __FUNCTION__, mId);
+        return INVALID_OPERATION;
+    }
+    sp<CameraDeviceBase> device = mDevice.promote();
+    if (device == 0) {
+        ALOGE("%s: Camera %d: Device does not exist", __FUNCTION__, mId);
+        return INVALID_OPERATION;
+    }
 
     if (mZslConsumer == 0) {
         // Create CPU buffer queue endpoint
@@ -136,7 +146,7 @@
         if (res != OK) {
             ALOGE("%s: Camera %d: Error querying capture output stream info: "
                     "%s (%d)", __FUNCTION__,
-                    client->getCameraId(), strerror(-res), res);
+                    mId, strerror(-res), res);
             return res;
         }
         if (currentWidth != (uint32_t)params.fastInfo.arrayWidth ||
@@ -145,16 +155,16 @@
             if (res != OK) {
                 ALOGE("%s: Camera %d: Unable to delete old reprocess stream "
                         "for ZSL: %s (%d)", __FUNCTION__,
-                        client->getCameraId(), strerror(-res), res);
+                        mId, strerror(-res), res);
                 return res;
             }
             ALOGV("%s: Camera %d: Deleting stream %d since the buffer dimensions changed",
-                __FUNCTION__, client->getCameraId(), mZslStreamId);
+                __FUNCTION__, mId, mZslStreamId);
             res = device->deleteStream(mZslStreamId);
             if (res != OK) {
                 ALOGE("%s: Camera %d: Unable to delete old output stream "
                         "for ZSL: %s (%d)", __FUNCTION__,
-                        client->getCameraId(), strerror(-res), res);
+                        mId, strerror(-res), res);
                 return res;
             }
             mZslStreamId = NO_STREAM;
@@ -173,7 +183,7 @@
                 &mZslStreamId);
         if (res != OK) {
             ALOGE("%s: Camera %d: Can't create output stream for ZSL: "
-                    "%s (%d)", __FUNCTION__, client->getCameraId(),
+                    "%s (%d)", __FUNCTION__, mId,
                     strerror(-res), res);
             return res;
         }
@@ -181,7 +191,7 @@
                 &mZslReprocessStreamId);
         if (res != OK) {
             ALOGE("%s: Camera %d: Can't create reprocess stream for ZSL: "
-                    "%s (%d)", __FUNCTION__, client->getCameraId(),
+                    "%s (%d)", __FUNCTION__, mId,
                     strerror(-res), res);
             return res;
         }
@@ -200,14 +210,18 @@
     Mutex::Autolock l(mInputMutex);
 
     if (mZslStreamId != NO_STREAM) {
-        sp<Camera2Client> client = mClient.promote();
-        if (client == 0) return OK;
-        sp<CameraDeviceBase> device = client->getCameraDevice();
+        sp<CameraDeviceBase> device = mDevice.promote();
+        if (device == 0) {
+            ALOGE("%s: Camera %d: Device does not exist", __FUNCTION__, mId);
+            return INVALID_OPERATION;
+        }
+
+        clearZslQueueLocked();
 
         res = device->deleteReprocessStream(mZslReprocessStreamId);
         if (res != OK) {
             ALOGE("%s: Camera %d: Cannot delete ZSL reprocessing stream %d: "
-                    "%s (%d)", __FUNCTION__, client->getCameraId(),
+                    "%s (%d)", __FUNCTION__, mId,
                     mZslReprocessStreamId, strerror(-res), res);
             return res;
         }
@@ -216,7 +230,7 @@
         res = device->deleteStream(mZslStreamId);
         if (res != OK) {
             ALOGE("%s: Camera %d: Cannot delete ZSL output stream %d: "
-                    "%s (%d)", __FUNCTION__, client->getCameraId(),
+                    "%s (%d)", __FUNCTION__, mId,
                     mZslStreamId, strerror(-res), res);
             return res;
         }
@@ -246,7 +260,10 @@
     status_t res;
     sp<Camera2Client> client = mClient.promote();
 
-    if (client == 0) return INVALID_OPERATION;
+    if (client == 0) {
+        ALOGE("%s: Camera %d: Client does not exist", __FUNCTION__, mId);
+        return INVALID_OPERATION;
+    }
 
     IF_ALOGV() {
         dumpZslQueue(-1);
@@ -309,7 +326,7 @@
         if (res != OK) {
             ALOGE("%s: Camera %d: Unable to stop preview for ZSL capture: "
                 "%s (%d)",
-                __FUNCTION__, client->getCameraId(), strerror(-res), res);
+                __FUNCTION__, mId, strerror(-res), res);
             return INVALID_OPERATION;
         }
         // TODO: have push-and-clear be atomic
@@ -328,7 +345,7 @@
             if (res != OK) {
                 ALOGE("%s: Camera %d: Unable to update JPEG entries of ZSL "
                         "capture request: %s (%d)", __FUNCTION__,
-                        client->getCameraId(),
+                        mId,
                         strerror(-res), res);
                 return res;
             }
@@ -397,26 +414,29 @@
     }
 
     do {
-        sp<Camera2Client> client = mClient.promote();
-        if (client == 0) return false;
-        res = processNewZslBuffer(client);
+        res = processNewZslBuffer();
     } while (res == OK);
 
     return true;
 }
 
-status_t ZslProcessor::processNewZslBuffer(sp<Camera2Client> &client) {
+status_t ZslProcessor::processNewZslBuffer() {
     ATRACE_CALL();
     status_t res;
-
+    sp<BufferItemConsumer> zslConsumer;
+    {
+        Mutex::Autolock l(mInputMutex);
+        if (mZslConsumer == 0) return OK;
+        zslConsumer = mZslConsumer;
+    }
     ALOGVV("Trying to get next buffer");
     BufferItemConsumer::BufferItem item;
-    res = mZslConsumer->acquireBuffer(&item);
+    res = zslConsumer->acquireBuffer(&item);
     if (res != OK) {
         if (res != BufferItemConsumer::NO_BUFFER_AVAILABLE) {
             ALOGE("%s: Camera %d: Error receiving ZSL image buffer: "
                     "%s (%d)", __FUNCTION__,
-                    client->getCameraId(), strerror(-res), res);
+                    mId, strerror(-res), res);
         } else {
             ALOGVV("  No buffer");
         }
@@ -427,7 +447,7 @@
 
     if (mState == LOCKED) {
         ALOGVV("In capture, discarding new ZSL buffers");
-        mZslConsumer->releaseBuffer(item);
+        zslConsumer->releaseBuffer(item);
         return OK;
     }
 
@@ -435,7 +455,7 @@
 
     if ( (mZslQueueHead + 1) % kZslBufferDepth == mZslQueueTail) {
         ALOGVV("Releasing oldest buffer");
-        mZslConsumer->releaseBuffer(mZslQueue[mZslQueueTail].buffer);
+        zslConsumer->releaseBuffer(mZslQueue[mZslQueueTail].buffer);
         mZslQueue.replaceAt(mZslQueueTail);
         mZslQueueTail = (mZslQueueTail + 1) % kZslBufferDepth;
     }
diff --git a/services/camera/libcameraservice/camera2/ZslProcessor.h b/services/camera/libcameraservice/camera2/ZslProcessor.h
index b2cf5b1..ee3bcd6 100644
--- a/services/camera/libcameraservice/camera2/ZslProcessor.h
+++ b/services/camera/libcameraservice/camera2/ZslProcessor.h
@@ -46,7 +46,7 @@
             virtual public FrameProcessor::FilteredListener,
             virtual public CameraDeviceBase::BufferReleasedListener {
   public:
-    ZslProcessor(wp<Camera2Client> client, wp<CaptureSequencer> sequencer);
+    ZslProcessor(sp<Camera2Client> client, wp<CaptureSequencer> sequencer);
     ~ZslProcessor();
 
     // From mZslConsumer
@@ -74,7 +74,9 @@
     } mState;
 
     wp<Camera2Client> mClient;
+    wp<CameraDeviceBase> mDevice;
     wp<CaptureSequencer> mSequencer;
+    int mId;
 
     mutable Mutex mInputMutex;
     bool mZslBufferAvailable;
@@ -109,7 +111,7 @@
 
     virtual bool threadLoop();
 
-    status_t processNewZslBuffer(sp<Camera2Client> &client);
+    status_t processNewZslBuffer();
 
     // Match up entries from frame list to buffers in ZSL queue
     void findMatchesLocked();