| /* |
| * Copyright 2008, The Android Open Source Project |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #include <stdlib.h> |
| #include <fcntl.h> |
| #include <errno.h> |
| #include <string.h> |
| |
| #include "hardware/wifi.h" |
| #include "libwpa_client/wpa_ctrl.h" |
| |
| #define LOG_TAG "WifiHW" |
| #include "cutils/log.h" |
| #include "cutils/memory.h" |
| #include "cutils/misc.h" |
| #include "cutils/properties.h" |
| #include "private/android_filesystem_config.h" |
| |
| static struct wpa_ctrl *ctrl_conn; |
| static struct wpa_ctrl *monitor_conn; |
| |
| extern int do_dhcp(); |
| extern int ifc_init(); |
| extern void ifc_close(); |
| extern char *dhcp_lasterror(); |
| extern void get_dhcp_info(); |
| extern int init_module(void *, unsigned long, const char *); |
| extern int delete_module(const char *, unsigned int); |
| |
| static char iface[PROPERTY_VALUE_MAX]; |
| // TODO: use new ANDROID_SOCKET mechanism, once support for multiple |
| // sockets is in |
| |
| static const char IFACE_DIR[] = "/data/system/wpa_supplicant"; |
| static const char DRIVER_MODULE_NAME[] = "wlan"; |
| static const char DRIVER_MODULE_TAG[] = "wlan "; |
| static const char DRIVER_MODULE_PATH[] = "/system/lib/modules/wlan.ko"; |
| static const char FIRMWARE_LOADER[] = "wlan_loader"; |
| static const char DRIVER_PROP_NAME[] = "wlan.driver.status"; |
| static const char SUPPLICANT_NAME[] = "wpa_supplicant"; |
| static const char SUPP_PROP_NAME[] = "init.svc.wpa_supplicant"; |
| static const char SUPP_CONFIG_TEMPLATE[]= "/system/etc/wifi/wpa_supplicant.conf"; |
| static const char SUPP_CONFIG_FILE[] = "/data/misc/wifi/wpa_supplicant.conf"; |
| static const char MODULE_FILE[] = "/proc/modules"; |
| |
| static int insmod(const char *filename) |
| { |
| void *module; |
| unsigned int size; |
| int ret; |
| |
| module = load_file(filename, &size); |
| if (!module) |
| return -1; |
| |
| ret = init_module(module, size, ""); |
| |
| free(module); |
| |
| return ret; |
| } |
| |
| static int rmmod(const char *modname) |
| { |
| int ret = -1; |
| int maxtry = 10; |
| |
| while (maxtry-- > 0) { |
| ret = delete_module(modname, O_NONBLOCK | O_EXCL); |
| if (ret < 0 && errno == EAGAIN) |
| usleep(500000); |
| else |
| break; |
| } |
| |
| if (ret != 0) |
| LOGD("Unable to unload driver module \"%s\": %s\n", |
| modname, strerror(errno)); |
| return ret; |
| } |
| |
| int do_dhcp_request(int *ipaddr, int *gateway, int *mask, |
| int *dns1, int *dns2, int *server, int *lease) { |
| /* For test driver, always report success */ |
| if (strcmp(iface, "sta") == 0) |
| return 0; |
| |
| if (ifc_init() < 0) |
| return -1; |
| |
| if (do_dhcp(iface) < 0) { |
| ifc_close(); |
| return -1; |
| } |
| ifc_close(); |
| get_dhcp_info(ipaddr, gateway, mask, dns1, dns2, server, lease); |
| return 0; |
| } |
| |
| const char *get_dhcp_error_string() { |
| return dhcp_lasterror(); |
| } |
| |
| static int check_driver_loaded() { |
| char driver_status[PROPERTY_VALUE_MAX]; |
| FILE *proc; |
| char line[sizeof(DRIVER_MODULE_TAG)+10]; |
| |
| if (!property_get(DRIVER_PROP_NAME, driver_status, NULL) |
| || strcmp(driver_status, "ok") != 0) { |
| return 0; /* driver not loaded */ |
| } |
| /* |
| * If the property says the driver is loaded, check to |
| * make sure that the property setting isn't just left |
| * over from a previous manual shutdown or a runtime |
| * crash. |
| */ |
| if ((proc = fopen(MODULE_FILE, "r")) == NULL) { |
| LOGW("Could not open %s: %s", MODULE_FILE, strerror(errno)); |
| property_set(DRIVER_PROP_NAME, "unloaded"); |
| return 0; |
| } |
| while ((fgets(line, sizeof(line), proc)) != NULL) { |
| if (strncmp(line, DRIVER_MODULE_TAG, strlen(DRIVER_MODULE_TAG)) == 0) { |
| fclose(proc); |
| return 1; |
| } |
| } |
| fclose(proc); |
| property_set(DRIVER_PROP_NAME, "unloaded"); |
| return 0; |
| } |
| |
| int wifi_load_driver() |
| { |
| char driver_status[PROPERTY_VALUE_MAX]; |
| int count = 100; /* wait at most 20 seconds for completion */ |
| |
| if (check_driver_loaded()) { |
| return 0; |
| } |
| |
| if (insmod(DRIVER_MODULE_PATH) < 0) |
| return -1; |
| |
| property_set("ctl.start", FIRMWARE_LOADER); |
| sched_yield(); |
| while (count-- > 0) { |
| if (property_get(DRIVER_PROP_NAME, driver_status, NULL)) { |
| if (strcmp(driver_status, "ok") == 0) |
| return 0; |
| else if (strcmp(DRIVER_PROP_NAME, "failed") == 0) |
| return -1; |
| } |
| usleep(200000); |
| } |
| property_set(DRIVER_PROP_NAME, "timeout"); |
| return -1; |
| } |
| |
| int wifi_unload_driver() |
| { |
| int count = 20; /* wait at most 10 seconds for completion */ |
| |
| if (rmmod(DRIVER_MODULE_NAME) == 0) { |
| while (count-- > 0) { |
| if (!check_driver_loaded()) |
| break; |
| usleep(500000); |
| } |
| if (count) { |
| return 0; |
| } |
| return -1; |
| } else |
| return -1; |
| } |
| |
| static int control_supplicant(int startIt) |
| { |
| char supp_status[PROPERTY_VALUE_MAX] = {'\0'}; |
| const char *ctrl_prop = (startIt ? "ctl.start" : "ctl.stop"); |
| const char *desired_status = (startIt ? "running" : "stopped"); |
| int count = 200; /* wait at most 20 seconds for completion */ |
| |
| if (property_get(SUPP_PROP_NAME, supp_status, NULL) |
| && strcmp(supp_status, desired_status) == 0) { |
| return 0; /* supplicant already running */ |
| } |
| property_set(ctrl_prop, SUPPLICANT_NAME); |
| sched_yield(); |
| |
| while (count-- > 0) { |
| if (property_get(SUPP_PROP_NAME, supp_status, NULL)) { |
| if (strcmp(supp_status, desired_status) == 0) |
| return 0; |
| } |
| usleep(100000); |
| } |
| return -1; |
| } |
| |
| int ensure_config_file_exists() |
| { |
| char buf[2048]; |
| int srcfd, destfd; |
| int nread; |
| |
| if (access(SUPP_CONFIG_FILE, R_OK|W_OK) == 0) { |
| return 0; |
| } else if (errno != ENOENT) { |
| LOGE("Cannot access \"%s\": %s", SUPP_CONFIG_FILE, strerror(errno)); |
| return -1; |
| } |
| |
| srcfd = open(SUPP_CONFIG_TEMPLATE, O_RDONLY); |
| if (srcfd < 0) { |
| LOGE("Cannot open \"%s\": %s", SUPP_CONFIG_TEMPLATE, strerror(errno)); |
| return -1; |
| } |
| |
| destfd = open(SUPP_CONFIG_FILE, O_CREAT|O_WRONLY, 0660); |
| if (destfd < 0) { |
| close(srcfd); |
| LOGE("Cannot create \"%s\": %s", SUPP_CONFIG_FILE, strerror(errno)); |
| return -1; |
| } |
| |
| while ((nread = read(srcfd, buf, sizeof(buf))) != 0) { |
| if (nread < 0) { |
| LOGE("Error reading \"%s\": %s", SUPP_CONFIG_TEMPLATE, strerror(errno)); |
| close(srcfd); |
| close(destfd); |
| unlink(SUPP_CONFIG_FILE); |
| return -1; |
| } |
| write(destfd, buf, nread); |
| } |
| |
| close(destfd); |
| close(srcfd); |
| |
| if (chown(SUPP_CONFIG_FILE, AID_SYSTEM, AID_WIFI) < 0) { |
| LOGE("Error changing group ownership of %s to %d: %s", |
| SUPP_CONFIG_FILE, AID_WIFI, strerror(errno)); |
| unlink(SUPP_CONFIG_FILE); |
| return -1; |
| } |
| return 0; |
| } |
| |
| int wifi_start_supplicant() |
| { |
| /* Before starting the daemon, make sure its config file exists */ |
| if (ensure_config_file_exists() < 0) { |
| LOGE("Wi-Fi will not be enabled"); |
| return -1; |
| } |
| return control_supplicant(1); |
| } |
| |
| int wifi_stop_supplicant() |
| { |
| return control_supplicant(0); |
| } |
| |
| int wifi_connect_to_supplicant() |
| { |
| char ifname[256]; |
| static int cleaned_up = 0; |
| |
| property_get("wifi.interface", iface, "sta"); |
| |
| if (access(IFACE_DIR, F_OK) == 0) { |
| snprintf(ifname, sizeof(ifname), "%s/%s", IFACE_DIR, iface); |
| } else { |
| strlcpy(ifname, iface, sizeof(ifname)); |
| } |
| |
| ctrl_conn = wpa_ctrl_open(ifname); |
| if (ctrl_conn == NULL) { |
| LOGD("Unable to open connection to supplicant on \"%s\": %s", |
| ifname, strerror(errno)); |
| /* |
| * errno == ENOENT means the supplicant daemon isn't |
| * running. Take this opportunity to clear out any |
| * stale socket files that might be left over. Note |
| * there's a possible race with the command line client |
| * trying to connect to the daemon, but it would require |
| * that the supplicant be started and the command line |
| * client connect to it during the window between the |
| * error check and the removal of the files. And in |
| * any event, the remedy is that the user would simply |
| * have to run the command line program again. |
| */ |
| if (!cleaned_up && (errno == ENOENT || errno == EADDRINUSE)) { |
| cleaned_up = 1; /* do this just once */ |
| wpa_ctrl_cleanup(); |
| } |
| return -1; |
| } |
| monitor_conn = wpa_ctrl_open(ifname); |
| if (monitor_conn == NULL) { |
| wpa_ctrl_close(ctrl_conn); |
| ctrl_conn = NULL; |
| return -1; |
| } |
| if (wpa_ctrl_attach(monitor_conn) != 0) { |
| wpa_ctrl_close(monitor_conn); |
| wpa_ctrl_close(ctrl_conn); |
| ctrl_conn = monitor_conn = NULL; |
| return -1; |
| } |
| return 0; |
| } |
| |
| int wifi_send_command(struct wpa_ctrl *ctrl, const char *cmd, char *reply, size_t *reply_len) |
| { |
| int ret; |
| |
| if (ctrl_conn == NULL) { |
| LOGV("Not connected to wpa_supplicant - \"%s\" command dropped.\n", cmd); |
| return -1; |
| } |
| ret = wpa_ctrl_request(ctrl, cmd, strlen(cmd), reply, reply_len, NULL); |
| if (ret == -2) { |
| LOGD("'%s' command timed out.\n", cmd); |
| return -2; |
| } else if (ret < 0 || strncmp(reply, "FAIL", 4) == 0) { |
| return -1; |
| } |
| if (strncmp(cmd, "PING", 4) == 0) { |
| reply[*reply_len] = '\0'; |
| } |
| return 0; |
| } |
| |
| int wifi_wait_for_event(char *buf, size_t buflen) |
| { |
| size_t nread = buflen - 1; |
| int fd; |
| fd_set rfds; |
| int result; |
| struct timeval tval; |
| struct timeval *tptr; |
| |
| if (monitor_conn == NULL) |
| return 0; |
| |
| result = wpa_ctrl_recv(monitor_conn, buf, &nread); |
| if (result < 0) { |
| LOGD("wpa_ctrl_recv failed: %s\n", strerror(errno)); |
| return -1; |
| } |
| buf[nread] = '\0'; |
| /* LOGD("wait_for_event: result=%d nread=%d string=\"%s\"\n", result, nread, buf); */ |
| /* Check for EOF on the socket */ |
| if (result == 0 && nread == 0) { |
| /* Fabricate an event to pass up */ |
| LOGD("Received EOF on supplicant socket\n"); |
| strncpy(buf, WPA_EVENT_TERMINATING " - signal 0 received", buflen-1); |
| buf[buflen-1] = '\0'; |
| return strlen(buf); |
| } |
| /* |
| * Events strings are in the format |
| * |
| * <N>CTRL-EVENT-XXX |
| * |
| * where N is the message level in numerical form (0=VERBOSE, 1=DEBUG, |
| * etc.) and XXX is the event name. The level information is not useful |
| * to us, so strip it off. |
| */ |
| if (buf[0] == '<') { |
| char *match = strchr(buf, '>'); |
| if (match != NULL) { |
| nread -= (match+1-buf); |
| memmove(buf, match+1, nread+1); |
| } |
| } |
| return nread; |
| } |
| |
| void wifi_close_supplicant_connection() |
| { |
| if (ctrl_conn != NULL) { |
| wpa_ctrl_close(ctrl_conn); |
| ctrl_conn = NULL; |
| } |
| if (monitor_conn != NULL) { |
| wpa_ctrl_close(monitor_conn); |
| monitor_conn = NULL; |
| } |
| } |
| |
| int wifi_command(const char *command, char *reply, size_t *reply_len) |
| { |
| return wifi_send_command(ctrl_conn, command, reply, reply_len); |
| } |