/******************************************************************************
 *
 *  Copyright (C) 1999-2012 Broadcom Corporation
 *
 *  Licensed under the Apache License, Version 2.0 (the "License");
 *  you may not use this file except in compliance with the License.
 *  You may obtain a copy of the License at:
 *
 *  http://www.apache.org/licenses/LICENSE-2.0
 *
 *  Unless required by applicable law or agreed to in writing, software
 *  distributed under the License is distributed on an "AS IS" BASIS,
 *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 *  See the License for the specific language governing permissions and
 *  limitations under the License.
 *
 ******************************************************************************/

/******************************************************************************
 *
 *  this file contains functions that handle the database
 *
 ******************************************************************************/

#include <stdlib.h>
#include <string.h>
#include <stdio.h>

#include "bt_target.h"

#include "gki.h"

#include "l2cdefs.h"
#include "hcidefs.h"
#include "hcimsgs.h"

#include "sdp_api.h"
#include "sdpint.h"
#include "wbt_api.h"

#if SDP_SERVER_ENABLED == TRUE
/********************************************************************************/
/*              L O C A L    F U N C T I O N     P R O T O T Y P E S            */
/********************************************************************************/
static BOOLEAN find_uuid_in_seq (UINT8 *p , UINT32 seq_len, UINT8 *p_his_uuid,
                                 UINT16 his_len, int nest_level);


/*******************************************************************************
**
** Function         sdp_db_service_search
**
** Description      This function searches for a record that contains the
**                  specified UIDs. It is passed either NULL to start at the
**                  beginning, or the previous record found.
**
** Returns          Pointer to the record, or NULL if not found.
**
*******************************************************************************/
tSDP_RECORD *sdp_db_service_search (tSDP_RECORD *p_rec, tSDP_UUID_SEQ *p_seq)
{
    UINT16          xx, yy;
    tSDP_ATTRIBUTE *p_attr;
    tSDP_RECORD     *p_end = &sdp_cb.server_db.record[sdp_cb.server_db.num_records];

    /* If NULL, start at the beginning, else start at the first specified record */
    if (!p_rec)
        p_rec = &sdp_cb.server_db.record[0];
    else
        p_rec++;

    /* Look through the records. The spec says that a match occurs if */
    /* the record contains all the passed UUIDs in it.                */
    for ( ; p_rec < p_end; p_rec++)
    {
        for (yy = 0; yy < p_seq->num_uids; yy++)
        {
            p_attr = &p_rec->attribute[0];
            for (xx = 0; xx < p_rec->num_attributes; xx++, p_attr++)
            {
                if (p_attr->type == UUID_DESC_TYPE)
                {
                    if (sdpu_compare_uuid_arrays (p_attr->value_ptr, p_attr->len,
                                                  &p_seq->uuid_entry[yy].value[0],
                                                  p_seq->uuid_entry[yy].len))
                        break;
                }
                else if (p_attr->type == DATA_ELE_SEQ_DESC_TYPE)
                {
                    if (find_uuid_in_seq (p_attr->value_ptr, p_attr->len,
                                          &p_seq->uuid_entry[yy].value[0],
                                          p_seq->uuid_entry[yy].len, 0))
                        break;
                }
            }
            /* If any UUID was not found,  on to the next record */
            if (xx == p_rec->num_attributes)
                break;
        }

        /* If every UUID was found in the record, return the record */
        if (yy == p_seq->num_uids)
            return (p_rec);
    }

    /* If here, no more records found */
    return (NULL);
}

/*******************************************************************************
**
** Function         find_uuid_in_seq
**
** Description      This function searches a data element sequenct for a UUID.
**
** Returns          TRUE if found, else FALSE
**
*******************************************************************************/
static BOOLEAN find_uuid_in_seq (UINT8 *p , UINT32 seq_len, UINT8 *p_uuid,
                                 UINT16 uuid_len, int nest_level)
{
    UINT8   *p_end = p + seq_len;
    UINT8   type;
    UINT32  len;

    /* A little safety check to avoid excessive recursion */
    if (nest_level > 3)
        return (FALSE);

    while (p < p_end)
    {
        type = *p++;
        p = sdpu_get_len_from_type (p, type, &len);
        type = type >> 3;
        if (type == UUID_DESC_TYPE)
        {
            if (sdpu_compare_uuid_arrays (p, len, p_uuid, uuid_len))
                return (TRUE);
        }
        else if (type == DATA_ELE_SEQ_DESC_TYPE)
        {
            if (find_uuid_in_seq (p, len, p_uuid, uuid_len, nest_level + 1))
                return (TRUE);
        }
        p = p + len;
    }

    /* If here, failed to match */
    return (FALSE);
}

/*******************************************************************************
**
** Function         sdp_db_find_record
**
** Description      This function searches for a record with a specific handle
**                  It is passed the handle of the record.
**
** Returns          Pointer to the record, or NULL if not found.
**
*******************************************************************************/
tSDP_RECORD *sdp_db_find_record (UINT32 handle)
{
    tSDP_RECORD     *p_rec;
    tSDP_RECORD     *p_end = &sdp_cb.server_db.record[sdp_cb.server_db.num_records];

    /* Look through the records for the caller's handle */
    for (p_rec = &sdp_cb.server_db.record[0]; p_rec < p_end; p_rec++)
    {
        if (p_rec->record_handle == handle)
            return (p_rec);
    }

    /* Record with that handle not found. */
    return (NULL);
}

/*******************************************************************************
**
** Function         sdp_db_find_attr_in_rec
**
** Description      This function searches a record for specific attributes.
**                  It is passed a pointer to the record. If the record contains
**                  the specified attribute, (the caller may specify be a range
**                  of attributes), the attribute is returned.
**
** Returns          Pointer to the attribute, or NULL if not found.
**
*******************************************************************************/
tSDP_ATTRIBUTE *sdp_db_find_attr_in_rec (tSDP_RECORD *p_rec, UINT16 start_attr,
                                         UINT16 end_attr)
{
    tSDP_ATTRIBUTE  *p_at;
    UINT16          xx;

    /* Note that the attributes in a record are assumed to be in sorted order */
    for (xx = 0, p_at = &p_rec->attribute[0]; xx < p_rec->num_attributes;
         xx++, p_at++)
    {
        if ((p_at->id >= start_attr) && (p_at->id <= end_attr))
            return (p_at);
    }

    /* No matching attribute found */
    return (NULL);
}


/*******************************************************************************
**
** Function         sdp_compose_proto_list
**
** Description      This function is called to compose a data sequence from
**                  protocol element list struct pointer
**
** Returns          the length of the data sequence
**
*******************************************************************************/
static int sdp_compose_proto_list( UINT8 *p, UINT16 num_elem,
                                  tSDP_PROTOCOL_ELEM *p_elem_list)
{
    UINT16          xx, yy, len;
    BOOLEAN            is_rfcomm_scn;
    UINT8           *p_head = p;
    UINT8            *p_len;

    /* First, build the protocol list. This consists of a set of data element
    ** sequences, one for each layer. Each layer sequence consists of layer's
    ** UUID and optional parameters
    */
    for (xx = 0; xx < num_elem; xx++, p_elem_list++)
    {
        len = 3 + (p_elem_list->num_params * 3);
        UINT8_TO_BE_STREAM  (p, (DATA_ELE_SEQ_DESC_TYPE << 3) | SIZE_IN_NEXT_BYTE);

        p_len = p;
        *p++ = (UINT8) len;

        UINT8_TO_BE_STREAM  (p, (UUID_DESC_TYPE << 3) | SIZE_TWO_BYTES);
        UINT16_TO_BE_STREAM (p, p_elem_list->protocol_uuid);

        if (p_elem_list->protocol_uuid == UUID_PROTOCOL_RFCOMM)
            is_rfcomm_scn = TRUE;
        else
            is_rfcomm_scn = FALSE;

        for (yy = 0; yy < p_elem_list->num_params; yy++)
        {
            if (is_rfcomm_scn)
            {
                UINT8_TO_BE_STREAM  (p, (UINT_DESC_TYPE << 3) | SIZE_ONE_BYTE);
                UINT8_TO_BE_STREAM (p, p_elem_list->params[yy]);

                *p_len -= 1;
            }
            else
            {
                UINT8_TO_BE_STREAM  (p, (UINT_DESC_TYPE << 3) | SIZE_TWO_BYTES);
                UINT16_TO_BE_STREAM (p, p_elem_list->params[yy]);
            }
        }
    }
    return (p - p_head);
}

#endif  /* SDP_SERVER_ENABLED == TRUE */

/*******************************************************************************
**
** Function         SDP_CreateRecord
**
** Description      This function is called to create a record in the database.
**                  This would be through the SDP database maintenance API. The
**                  record is created empty, teh application should then call
**                  "add_attribute" to add the record's attributes.
**
** Returns          Record handle if OK, else 0.
**
*******************************************************************************/
UINT32 SDP_CreateRecord (void)
{
#if SDP_SERVER_ENABLED == TRUE
    UINT32    handle;
    UINT8     buf[4];
    tSDP_DB  *p_db = &sdp_cb.server_db;

    /* First, check if there is a free record */
    if (p_db->num_records < SDP_MAX_RECORDS)
    {
        memset (&p_db->record[p_db->num_records], 0,
                sizeof (tSDP_RECORD));

        /* We will use a handle of the first unreserved handle plus last record
        ** number + 1 */
        if (p_db->num_records)
            handle = p_db->record[p_db->num_records - 1].record_handle + 1;
        else
            handle = 0x10000;

        p_db->record[p_db->num_records].record_handle = handle;

        p_db->num_records++;
        SDP_TRACE_DEBUG("SDP_CreateRecord ok, num_records:%d", p_db->num_records);
        /* Add the first attribute (the handle) automatically */
        UINT32_TO_BE_FIELD (buf, handle);
        SDP_AddAttribute (handle, ATTR_ID_SERVICE_RECORD_HDL, UINT_DESC_TYPE,
                          4, buf);

        return (p_db->record[p_db->num_records - 1].record_handle);
    }
    else SDP_TRACE_ERROR("SDP_CreateRecord fail, exceed maximum records:%d", SDP_MAX_RECORDS);
#endif
        return (0);
}


/*******************************************************************************
**
** Function         SDP_DeleteRecord
**
** Description      This function is called to add a record (or all records)
**                  from the database. This would be through the SDP database
**                  maintenance API.
**
**                  If a record handle of 0 is passed, all records are deleted.
**
** Returns          TRUE if succeeded, else FALSE
**
*******************************************************************************/
BOOLEAN SDP_DeleteRecord (UINT32 handle)
{
#if SDP_SERVER_ENABLED == TRUE
    UINT16          xx, yy, zz;
    tSDP_RECORD     *p_rec = &sdp_cb.server_db.record[0];

    if (handle == 0 || sdp_cb.server_db.num_records == 0)
    {
        /* Delete all records in the database */
        sdp_cb.server_db.num_records = 0;

        /* require new DI record to be created in SDP_SetLocalDiRecord */
        sdp_cb.server_db.di_primary_handle = 0;
        sdp_cb.server_db.brcm_di_registered = 0;

        return (TRUE);
    }
    else
    {
        /* Find the record in the database */
        for (xx = 0; xx < sdp_cb.server_db.num_records; xx++, p_rec++)
        {
            if (p_rec->record_handle == handle)
            {
                /* Found it. Shift everything up one */
                for (yy = xx; yy < sdp_cb.server_db.num_records; yy++, p_rec++)
                {
                    *p_rec = *(p_rec + 1);

                    /* Adjust the attribute value pointer for each attribute */
                    for (zz = 0; zz < p_rec->num_attributes; zz++)
                        p_rec->attribute[zz].value_ptr -= sizeof(tSDP_RECORD);
                }

                sdp_cb.server_db.num_records--;

                SDP_TRACE_DEBUG("SDP_DeleteRecord ok, num_records:%d", sdp_cb.server_db.num_records);
                /* if we're deleting the primary DI record, clear the */
                /* value in the control block */
                if( sdp_cb.server_db.di_primary_handle == handle )
                {
                    sdp_cb.server_db.di_primary_handle = 0;
                    sdp_cb.server_db.brcm_di_registered = 0;
                }

                return (TRUE);
            }
        }
    }
#endif
    return (FALSE);
}


/*******************************************************************************
**
** Function         SDP_AddAttribute
**
** Description      This function is called to add an attribute to a record.
**                  This would be through the SDP database maintenance API.
**                  If the attribute already exists in the record, it is replaced
**                  with the new value.
**
** NOTE             Attribute values must be passed as a Big Endian stream.
**
** Returns          TRUE if added OK, else FALSE
**
*******************************************************************************/
BOOLEAN SDP_AddAttribute (UINT32 handle, UINT16 attr_id, UINT8 attr_type,
                          UINT32 attr_len, UINT8 *p_val)
{
#if SDP_SERVER_ENABLED == TRUE
    UINT16          xx, yy, zz;
    tSDP_RECORD     *p_rec = &sdp_cb.server_db.record[0];

#if (BT_TRACE_VERBOSE == TRUE)
    if (sdp_cb.trace_level >= BT_TRACE_LEVEL_DEBUG)
    {
        if ((attr_type == UINT_DESC_TYPE) ||
            (attr_type == TWO_COMP_INT_DESC_TYPE) ||
            (attr_type == UUID_DESC_TYPE) ||
            (attr_type == DATA_ELE_SEQ_DESC_TYPE) ||
            (attr_type == DATA_ELE_ALT_DESC_TYPE))
        {
            UINT8 num_array[400];
            UINT32 i;
            UINT32 len = (attr_len > 200) ? 200 : attr_len;

            num_array[0] ='\0';
            for (i = 0; i < len; i++)
            {
                sprintf((char *)&num_array[i*2],"%02X",(UINT8)(p_val[i]));
            }
            SDP_TRACE_DEBUG("SDP_AddAttribute: handle:%X, id:%04X, type:%d, len:%d, p_val:%p, *p_val:%s",
                            handle,attr_id,attr_type,attr_len,p_val,num_array);
        }
        else if (attr_type == BOOLEAN_DESC_TYPE)
        {
            SDP_TRACE_DEBUG("SDP_AddAttribute: handle:%X, id:%04X, type:%d, len:%d, p_val:%p, *p_val:%d",
                             handle,attr_id,attr_type,attr_len,p_val,*p_val);
        }
        else
        {
            SDP_TRACE_DEBUG("SDP_AddAttribute: handle:%X, id:%04X, type:%d, len:%d, p_val:%p, *p_val:%s",
                handle,attr_id,attr_type,attr_len,p_val,p_val);
        }
    }
#endif

    /* Find the record in the database */
    for (zz = 0; zz < sdp_cb.server_db.num_records; zz++, p_rec++)
    {
        if (p_rec->record_handle == handle)
        {
            tSDP_ATTRIBUTE  *p_attr = &p_rec->attribute[0];

            /* Found the record. Now, see if the attribute already exists */
            for (xx = 0; xx < p_rec->num_attributes; xx++, p_attr++)
            {
                /* The attribute exists. replace it */
                if (p_attr->id == attr_id)
                {
                    SDP_DeleteAttribute (handle, attr_id);
                    break;
                }
                if (p_attr->id > attr_id)
                    break;
            }

            if (p_rec->num_attributes == SDP_MAX_REC_ATTR)
                return (FALSE);

            /* If not found, see if we can allocate a new entry */
            if (xx == p_rec->num_attributes)
                p_attr = &p_rec->attribute[p_rec->num_attributes];
            else
            {
                /* Since the attributes are kept in sorted order, insert ours here */
                for (yy = p_rec->num_attributes; yy > xx; yy--)
                    p_rec->attribute[yy] = p_rec->attribute[yy - 1];
            }

            p_attr->id   = attr_id;
            p_attr->type = attr_type;
            p_attr->len  = attr_len;

            if (p_rec->free_pad_ptr + attr_len >= SDP_MAX_PAD_LEN)
            {
                /* do truncate only for text string type descriptor */
                if (attr_type == TEXT_STR_DESC_TYPE)
                {
                    SDP_TRACE_WARNING("SDP_AddAttribute: attr_len:%d too long. truncate to (%d)",
                        attr_len, SDP_MAX_PAD_LEN - p_rec->free_pad_ptr );

                    attr_len = SDP_MAX_PAD_LEN - p_rec->free_pad_ptr;
                    p_val[SDP_MAX_PAD_LEN - p_rec->free_pad_ptr] = '\0';
                    p_val[SDP_MAX_PAD_LEN - p_rec->free_pad_ptr+1] = '\0';
                }
                else
                    attr_len = 0;
            }

            if ((attr_len > 0) && (p_val != 0))
            {
                p_attr->len  = attr_len;
                memcpy (&p_rec->attr_pad[p_rec->free_pad_ptr], p_val, (size_t)attr_len);
                p_attr->value_ptr = &p_rec->attr_pad[p_rec->free_pad_ptr];
                p_rec->free_pad_ptr += attr_len;
            }
            else if ((attr_len == 0 && p_attr->len != 0) || /* if truncate to 0 length, simply don't add */
                      p_val == 0)
            {
                SDP_TRACE_ERROR("SDP_AddAttribute fail, length exceed maximum: ID %d: attr_len:%d ",
                    attr_id, attr_len );
                p_attr->id   = p_attr->type = p_attr->len  = 0;
                return (FALSE);
            }
            p_rec->num_attributes++;

            /*** Mark DI record as used by Broadcom ***/
            if (handle == sdp_cb.server_db.di_primary_handle &&
                attr_id == ATTR_ID_EXT_BRCM_VERSION)
                sdp_cb.server_db.brcm_di_registered = TRUE;

            return (TRUE);
        }
    }
#endif
    return (FALSE);
}


/*******************************************************************************
**
** Function         SDP_AddSequence
**
** Description      This function is called to add a sequence to a record.
**                  This would be through the SDP database maintenance API.
**                  If the sequence already exists in the record, it is replaced
**                  with the new sequence.
**
** NOTE             Element values must be passed as a Big Endian stream.
**
** Returns          TRUE if added OK, else FALSE
**
*******************************************************************************/
BOOLEAN SDP_AddSequence (UINT32 handle,  UINT16 attr_id, UINT16 num_elem,
                         UINT8 type[], UINT8 len[], UINT8 *p_val[])
{
#if SDP_SERVER_ENABLED == TRUE
    UINT16          xx;
    UINT8           *p_buff;
    UINT8           *p;
    UINT8           *p_head;
    BOOLEAN         result;

    if ((p_buff = (UINT8 *) GKI_getbuf(sizeof(UINT8) * SDP_MAX_ATTR_LEN * 2)) == NULL)
    {
        SDP_TRACE_ERROR("SDP_AddSequence cannot get a buffer!");
        return (FALSE);
    }
    p = p_buff;

    /* First, build the sequence */
    for (xx = 0; xx < num_elem; xx++)
    {
        p_head = p;
        switch (len[xx])
        {
        case 1:
            UINT8_TO_BE_STREAM (p, (type[xx] << 3) | SIZE_ONE_BYTE);
            break;
        case 2:
            UINT8_TO_BE_STREAM  (p, (type[xx] << 3) | SIZE_TWO_BYTES);
            break;
        case 4:
            UINT8_TO_BE_STREAM  (p, (type[xx] << 3) | SIZE_FOUR_BYTES);
            break;
        case 8:
            UINT8_TO_BE_STREAM  (p, (type[xx] << 3) | SIZE_EIGHT_BYTES);
            break;
        case 16:
            UINT8_TO_BE_STREAM  (p, (type[xx] << 3) | SIZE_SIXTEEN_BYTES);
            break;
        default:
            UINT8_TO_BE_STREAM (p, (type[xx] << 3) | SIZE_IN_NEXT_BYTE);
            UINT8_TO_BE_STREAM (p, len[xx]);
            break;
        }

        ARRAY_TO_BE_STREAM (p, p_val[xx], len[xx]);

        if (p - p_buff > SDP_MAX_ATTR_LEN)
        {
            /* go back to before we add this element */
            p = p_head;
            if(p_head == p_buff)
            {
                /* the first element exceed the max length */
                SDP_TRACE_ERROR ("SDP_AddSequence - too long(attribute is not added)!!");
                GKI_freebuf(p_buff);
                return FALSE;
            }
            else
                SDP_TRACE_ERROR ("SDP_AddSequence - too long, add %d elements of %d", xx, num_elem);
            break;
        }
    }
    result = SDP_AddAttribute (handle, attr_id, DATA_ELE_SEQ_DESC_TYPE,(UINT32) (p - p_buff), p_buff);
    GKI_freebuf(p_buff);
    return result;
#else   /* SDP_SERVER_ENABLED == FALSE */
    return (FALSE);
#endif
}


/*******************************************************************************
**
** Function         SDP_AddUuidSequence
**
** Description      This function is called to add a UUID sequence to a record.
**                  This would be through the SDP database maintenance API.
**                  If the sequence already exists in the record, it is replaced
**                  with the new sequence.
**
** Returns          TRUE if added OK, else FALSE
**
*******************************************************************************/
BOOLEAN SDP_AddUuidSequence (UINT32 handle,  UINT16 attr_id, UINT16 num_uuids,
                             UINT16 *p_uuids)
{
#if SDP_SERVER_ENABLED == TRUE
    UINT16          xx;
    UINT8           *p_buff;
    UINT8           *p;
    INT32           max_len = SDP_MAX_ATTR_LEN -3;
    BOOLEAN         result;

    if ((p_buff = (UINT8 *) GKI_getbuf(sizeof(UINT8) * SDP_MAX_ATTR_LEN * 2)) == NULL)
    {
        SDP_TRACE_ERROR("SDP_AddUuidSequence cannot get a buffer!");
        return (FALSE);
    }
    p = p_buff;

    /* First, build the sequence */
    for (xx = 0; xx < num_uuids ; xx++, p_uuids++)
    {
        UINT8_TO_BE_STREAM  (p, (UUID_DESC_TYPE << 3) | SIZE_TWO_BYTES);
        UINT16_TO_BE_STREAM (p, *p_uuids);

        if((p - p_buff) > max_len)
        {
            SDP_TRACE_WARNING ("SDP_AddUuidSequence - too long, add %d uuids of %d", xx, num_uuids);
            break;
        }
    }

    result = SDP_AddAttribute (handle, attr_id, DATA_ELE_SEQ_DESC_TYPE,(UINT32) (p - p_buff), p_buff);
    GKI_freebuf(p_buff);
    return result;
#else   /* SDP_SERVER_ENABLED == FALSE */
    return (FALSE);
#endif
}

/*******************************************************************************
**
** Function         SDP_AddProtocolList
**
** Description      This function is called to add a protocol descriptor list to
**                  a record. This would be through the SDP database maintenance API.
**                  If the protocol list already exists in the record, it is replaced
**                  with the new list.
**
** Returns          TRUE if added OK, else FALSE
**
*******************************************************************************/
BOOLEAN SDP_AddProtocolList (UINT32 handle, UINT16 num_elem,
                             tSDP_PROTOCOL_ELEM *p_elem_list)
{
#if SDP_SERVER_ENABLED == TRUE
    UINT8           *p_buff;
    int             offset;
    BOOLEAN         result;

    if ((p_buff = (UINT8 *) GKI_getbuf(sizeof(UINT8) * SDP_MAX_ATTR_LEN * 2)) == NULL)
    {
        SDP_TRACE_ERROR("SDP_AddProtocolList cannot get a buffer!");
        return (FALSE);
    }

    offset = sdp_compose_proto_list(p_buff, num_elem, p_elem_list);
    result = SDP_AddAttribute (handle, ATTR_ID_PROTOCOL_DESC_LIST,DATA_ELE_SEQ_DESC_TYPE, (UINT32) offset, p_buff);
    GKI_freebuf(p_buff);
    return result;
#else   /* SDP_SERVER_ENABLED == FALSE */
    return (FALSE);
#endif
}


/*******************************************************************************
**
** Function         SDP_AddAdditionProtoLists
**
** Description      This function is called to add a protocol descriptor list to
**                  a record. This would be through the SDP database maintenance API.
**                  If the protocol list already exists in the record, it is replaced
**                  with the new list.
**
** Returns          TRUE if added OK, else FALSE
**
*******************************************************************************/
BOOLEAN SDP_AddAdditionProtoLists (UINT32 handle, UINT16 num_elem,
                                   tSDP_PROTO_LIST_ELEM *p_proto_list)
{
#if SDP_SERVER_ENABLED == TRUE
    UINT16          xx;
    UINT8           *p_buff;
    UINT8           *p;
    UINT8           *p_len;
    int             offset;
    BOOLEAN         result;

    if ((p_buff = (UINT8 *) GKI_getbuf(sizeof(UINT8) * SDP_MAX_ATTR_LEN * 2)) == NULL)
    {
        SDP_TRACE_ERROR("SDP_AddAdditionProtoLists cannot get a buffer!");
        return (FALSE);
    }
    p = p_buff;

    /* for each ProtocolDescriptorList */
    for (xx = 0; xx < num_elem; xx++, p_proto_list++)
    {
        UINT8_TO_BE_STREAM  (p, (DATA_ELE_SEQ_DESC_TYPE << 3) | SIZE_IN_NEXT_BYTE);
        p_len = p++;

        offset = sdp_compose_proto_list(p, p_proto_list->num_elems,
                                        p_proto_list->list_elem);
        p += offset;

        *p_len  = (UINT8)(p - p_len - 1);
    }
    result = SDP_AddAttribute (handle, ATTR_ID_ADDITION_PROTO_DESC_LISTS,DATA_ELE_SEQ_DESC_TYPE,
	                           (UINT32) (p - p_buff), p_buff);
    GKI_freebuf(p_buff);
    return result;

#else   /* SDP_SERVER_ENABLED == FALSE */
    return (FALSE);
#endif
}

/*******************************************************************************
**
** Function         SDP_AddProfileDescriptorList
**
** Description      This function is called to add a profile descriptor list to
**                  a record. This would be through the SDP database maintenance API.
**                  If the version already exists in the record, it is replaced
**                  with the new one.
**
** Returns          TRUE if added OK, else FALSE
**
*******************************************************************************/
BOOLEAN SDP_AddProfileDescriptorList (UINT32 handle, UINT16 profile_uuid,
                                      UINT16 version)
{
#if SDP_SERVER_ENABLED == TRUE
    UINT8           *p_buff;
    UINT8           *p;
     BOOLEAN        result;

    if ((p_buff = (UINT8 *) GKI_getbuf(sizeof(UINT8) * SDP_MAX_ATTR_LEN)) == NULL)
    {
        SDP_TRACE_ERROR("SDP_AddProfileDescriptorList cannot get a buffer!");
        return (FALSE);
    }
    p = p_buff+2;

    /* First, build the profile descriptor list. This consists of a data element sequence. */
    /* The sequence consists of profile's UUID and version number  */
    UINT8_TO_BE_STREAM  (p, (UUID_DESC_TYPE << 3) | SIZE_TWO_BYTES);
    UINT16_TO_BE_STREAM (p, profile_uuid);

    UINT8_TO_BE_STREAM  (p, (UINT_DESC_TYPE << 3) | SIZE_TWO_BYTES);
    UINT16_TO_BE_STREAM (p, version);

    /* Add in type and length fields */
    *p_buff = (UINT8) ((DATA_ELE_SEQ_DESC_TYPE << 3) | SIZE_IN_NEXT_BYTE);
    *(p_buff+1) = (UINT8) (p - (p_buff+2));

    result = SDP_AddAttribute (handle, ATTR_ID_BT_PROFILE_DESC_LIST,DATA_ELE_SEQ_DESC_TYPE, (UINT32) (p - p_buff), p_buff);
    GKI_freebuf(p_buff);
    return result;

#else   /* SDP_SERVER_ENABLED == FALSE */
    return (FALSE);
#endif
}


/*******************************************************************************
**
** Function         SDP_AddLanguageBaseAttrIDList
**
** Description      This function is called to add a language base attr list to
**                  a record. This would be through the SDP database maintenance API.
**                  If the version already exists in the record, it is replaced
**                  with the new one.
**
** Returns          TRUE if added OK, else FALSE
**
*******************************************************************************/
BOOLEAN SDP_AddLanguageBaseAttrIDList (UINT32 handle, UINT16 lang,
                                       UINT16 char_enc, UINT16 base_id)
{
#if SDP_SERVER_ENABLED == TRUE
    UINT8           *p_buff;
    UINT8           *p;
    BOOLEAN         result;

    if ((p_buff = (UINT8 *) GKI_getbuf(sizeof(UINT8) * SDP_MAX_ATTR_LEN)) == NULL)
    {
        SDP_TRACE_ERROR("SDP_AddLanguageBaseAttrIDList cannot get a buffer!");
        return (FALSE);
    }
    p = p_buff;

    /* First, build the language base descriptor list. This consists of a data */
    /* element sequence. The sequence consists of 9 bytes (3 UINt16 fields)    */
    UINT8_TO_BE_STREAM  (p, (UINT_DESC_TYPE << 3) | SIZE_TWO_BYTES);
    UINT16_TO_BE_STREAM (p, lang);

    UINT8_TO_BE_STREAM  (p, (UINT_DESC_TYPE << 3) | SIZE_TWO_BYTES);
    UINT16_TO_BE_STREAM (p, char_enc);

    UINT8_TO_BE_STREAM  (p, (UINT_DESC_TYPE << 3) | SIZE_TWO_BYTES);
    UINT16_TO_BE_STREAM (p, base_id);

    result = SDP_AddAttribute (handle, ATTR_ID_LANGUAGE_BASE_ATTR_ID_LIST,DATA_ELE_SEQ_DESC_TYPE,
	                           (UINT32) (p - p_buff), p_buff);
    GKI_freebuf(p_buff);
    return result;
#else   /* SDP_SERVER_ENABLED == FALSE */
    return (FALSE);
#endif
}


/*******************************************************************************
**
** Function         SDP_AddServiceClassIdList
**
** Description      This function is called to add a service list to a record.
**                  This would be through the SDP database maintenance API.
**                  If the service list already exists in the record, it is replaced
**                  with the new list.
**
** Returns          TRUE if added OK, else FALSE
**
*******************************************************************************/
BOOLEAN SDP_AddServiceClassIdList (UINT32 handle, UINT16 num_services,
                                   UINT16 *p_service_uuids)
{
#if SDP_SERVER_ENABLED == TRUE
    UINT16          xx;
    UINT8           *p_buff;
    UINT8           *p;
    BOOLEAN         result;

    if ((p_buff = (UINT8 *) GKI_getbuf(sizeof(UINT8) * SDP_MAX_ATTR_LEN * 2)) == NULL)
    {
        SDP_TRACE_ERROR("SDP_AddServiceClassIdList cannot get a buffer!");
        return (FALSE);
    }
    p = p_buff;

    for (xx = 0; xx < num_services; xx++, p_service_uuids++)
    {
        UINT8_TO_BE_STREAM  (p, (UUID_DESC_TYPE << 3) | SIZE_TWO_BYTES);
        UINT16_TO_BE_STREAM (p, *p_service_uuids);
    }

    result = SDP_AddAttribute (handle, ATTR_ID_SERVICE_CLASS_ID_LIST,DATA_ELE_SEQ_DESC_TYPE,
	                           (UINT32) (p - p_buff), p_buff);
    GKI_freebuf(p_buff);
    return result;
#else   /* SDP_SERVER_ENABLED == FALSE */
    return (FALSE);
#endif
}


/*******************************************************************************
**
** Function         SDP_DeleteAttribute
**
** Description      This function is called to delete an attribute from a record.
**                  This would be through the SDP database maintenance API.
**
** Returns          TRUE if deleted OK, else FALSE if not found
**
*******************************************************************************/
BOOLEAN SDP_DeleteAttribute (UINT32 handle, UINT16 attr_id)
{
#if SDP_SERVER_ENABLED == TRUE
    UINT16          xx, yy;
    tSDP_RECORD     *p_rec = &sdp_cb.server_db.record[0];
    UINT8           *pad_ptr;
    UINT32  len;                        /* Number of bytes in the entry */

    /* Find the record in the database */
    for (xx = 0; xx < sdp_cb.server_db.num_records; xx++, p_rec++)
    {
        if (p_rec->record_handle == handle)
        {
            tSDP_ATTRIBUTE  *p_attr = &p_rec->attribute[0];

            SDP_TRACE_API("Deleting attr_id 0x%04x for handle 0x%x", attr_id, handle);
            /* Found it. Now, find the attribute */
            for (xx = 0; xx < p_rec->num_attributes; xx++, p_attr++)
            {
                if (p_attr->id == attr_id)
                {
                    pad_ptr = p_attr->value_ptr;
                    len = p_attr->len;

                    if (len)
                    {
                        for (yy = 0; yy < p_rec->num_attributes; yy++)
                        {
                            if( p_rec->attribute[yy].value_ptr > pad_ptr )
                                p_rec->attribute[yy].value_ptr -= len;
                        }
                    }

                    /* Found it. Shift everything up one */
                    p_rec->num_attributes--;

                    for (yy = xx; yy < p_rec->num_attributes; yy++, p_attr++)
                    {
                        *p_attr = *(p_attr + 1);
                    }

                    /* adjust attribute values if needed */
                    if (len)
                    {
                        xx = (p_rec->free_pad_ptr - ((pad_ptr+len) -
                                                  &p_rec->attr_pad[0]));
                        for( yy=0; yy<xx; yy++, pad_ptr++)
                            *pad_ptr = *(pad_ptr+len);
                        p_rec->free_pad_ptr -= len;
                    }
                    return (TRUE);
                }
            }
        }
    }
#endif
    /* If here, not found */
    return (FALSE);
}

/*******************************************************************************
**
** Function         SDP_ReadRecord
**
** Description      This function is called to get the raw data of the record
**                  with the given handle from the database.
**
** Returns          -1, if the record is not found.
**                  Otherwise, the offset (0 or 1) to start of data in p_data.
**
**                  The size of data copied into p_data is in *p_data_len.
**
*******************************************************************************/
#if (SDP_RAW_DATA_INCLUDED == TRUE)
INT32 SDP_ReadRecord(UINT32 handle, UINT8 *p_data, INT32 *p_data_len)
{
    INT32           len = 0;                        /* Number of bytes in the entry */
    INT32           offset = -1; /* default to not found */
#if SDP_SERVER_ENABLED == TRUE
    tSDP_RECORD     *p_rec;
    UINT16          start = 0;
    UINT16          end = 0xffff;
    tSDP_ATTRIBUTE  *p_attr;
    UINT16          rem_len;
    UINT8           *p_rsp;

    /* Find the record in the database */
    p_rec = sdp_db_find_record(handle);
    if(p_rec && p_data && p_data_len)
    {
        p_rsp = &p_data[3];
        while ( (p_attr = sdp_db_find_attr_in_rec (p_rec, start, end)) != NULL)
        {
            /* Check if attribute fits. Assume 3-byte value type/length */
            rem_len = *p_data_len - (UINT16) (p_rsp - p_data);

            if (p_attr->len > (UINT32)(rem_len - 6))
                break;

            p_rsp = sdpu_build_attrib_entry (p_rsp, p_attr);

            /* next attr id */
            start = p_attr->id + 1;
        }
        len = (INT32) (p_rsp - p_data);

        /* Put in the sequence header (2 or 3 bytes) */
        if (len > 255)
        {
            offset = 0;
            p_data[0] = (UINT8) ((DATA_ELE_SEQ_DESC_TYPE << 3) | SIZE_IN_NEXT_WORD);
            p_data[1] = (UINT8) ((len - 3) >> 8);
            p_data[2] = (UINT8) (len - 3);
        }
        else
        {
            offset = 1;

            p_data[1] = (UINT8) ((DATA_ELE_SEQ_DESC_TYPE << 3) | SIZE_IN_NEXT_BYTE);
            p_data[2] = (UINT8) (len - 3);

            len--;
        }
        *p_data_len = len;
    }
#endif
    /* If here, not found */
    return (offset);
}
#endif