/******************************************************************************
 *
 *  Copyright (C) 2001-2012 Broadcom Corporation
 *
 *  Licensed under the Apache License, Version 2.0 (the "License");
 *  you may not use this file except in compliance with the License.
 *  You may obtain a copy of the License at:
 *
 *  http://www.apache.org/licenses/LICENSE-2.0
 *
 *  Unless required by applicable law or agreed to in writing, software
 *  distributed under the License is distributed on an "AS IS" BASIS,
 *  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 *  See the License for the specific language governing permissions and
 *  limitations under the License.
 *
 ******************************************************************************/

/******************************************************************************
 *
 *  this file contains the PAN API definitions
 *
 ******************************************************************************/
#ifndef PAN_API_H
#define PAN_API_H

#include "bnep_api.h"

/*****************************************************************************
**  Constants
*****************************************************************************/

/* Define the minimum offset needed in a GKI buffer for
** sending PAN packets. Note, we are currently not sending
** extension headers, but may in the future, so allow
** space for them
*/
#define PAN_MINIMUM_OFFSET          BNEP_MINIMUM_OFFSET


/*
** The handle is passed from BNEP to PAN. The same handle is used
** between PAN and application as well
*/
#define PAN_INVALID_HANDLE          BNEP_INVALID_HANDLE

/* Bit map for PAN roles */
#define PAN_ROLE_CLIENT         0x01     /* PANU role */
#define PAN_ROLE_GN_SERVER      0x02     /* GN role */
#define PAN_ROLE_NAP_SERVER     0x04     /* NAP role */

/* Bitmap to indicate the usage of the Data */
#define PAN_DATA_TO_HOST        0x01
#define PAN_DATA_TO_LAN         0x02


/*****************************************************************************
**  Type Definitions
*****************************************************************************/

/* Define the result codes from PAN */
enum
{
    PAN_SUCCESS,                                                /* Success                           */
    PAN_DISCONNECTED            = BNEP_CONN_DISCONNECTED,       /* Connection terminated   */
    PAN_CONN_FAILED             = BNEP_CONN_FAILED,             /* Connection failed                 */
    PAN_NO_RESOURCES            = BNEP_NO_RESOURCES,            /* No resources                      */
    PAN_MTU_EXCEDED             = BNEP_MTU_EXCEDED,             /* Attempt to write long data        */
    PAN_INVALID_OFFSET          = BNEP_INVALID_OFFSET,          /* Insufficient offset in GKI buffer */
    PAN_CONN_FAILED_CFG         = BNEP_CONN_FAILED_CFG,         /* Connection failed cos of config   */
    PAN_INVALID_SRC_ROLE        = BNEP_CONN_FAILED_SRC_UUID,    /* Connection failed wrong source UUID   */
    PAN_INVALID_DST_ROLE        = BNEP_CONN_FAILED_DST_UUID,    /* Connection failed wrong destination UUID   */
    PAN_CONN_FAILED_UUID_SIZE   = BNEP_CONN_FAILED_UUID_SIZE,   /* Connection failed wrong size UUID   */
    PAN_Q_SIZE_EXCEEDED         = BNEP_Q_SIZE_EXCEEDED,         /* Too many buffers to dest          */
    PAN_TOO_MANY_FILTERS        = BNEP_TOO_MANY_FILTERS,        /* Too many local filters specified  */
    PAN_SET_FILTER_FAIL         = BNEP_SET_FILTER_FAIL,         /* Set Filter failed  */
    PAN_WRONG_HANDLE            = BNEP_WRONG_HANDLE,            /* Wrong handle for the connection  */
    PAN_WRONG_STATE             = BNEP_WRONG_STATE,             /* Connection is in wrong state */
    PAN_SECURITY_FAIL           = BNEP_SECURITY_FAIL,           /* Failed because of security */
    PAN_IGNORE_CMD              = BNEP_IGNORE_CMD,              /* To ignore the rcvd command */
    PAN_TX_FLOW_ON              = BNEP_TX_FLOW_ON,              /* tx data flow enabled */
    PAN_TX_FLOW_OFF	            = BNEP_TX_FLOW_OFF,             /* tx data flow disabled */
    PAN_FAILURE                                                 /* Failure                      */

};
typedef UINT8 tPAN_RESULT;


/*****************************************************************
**       Callback Function Prototypes
*****************************************************************/

/* This is call back function used to report connection status
**      to the application. The second parameter TRUE means
**      to create the bridge and FALSE means to remove it.
*/
typedef void (tPAN_CONN_STATE_CB) (UINT16 handle, BD_ADDR bd_addr, tPAN_RESULT state, BOOLEAN is_role_change,
                                        UINT8 src_role, UINT8 dst_role);


/* This is call back function used to create bridge for the
**      Connected device. The parameter "state" indicates
**      whether to create the bridge or remove it. TRUE means
**      to create the bridge and FALSE means to remove it.
*/
typedef void (tPAN_BRIDGE_REQ_CB) (BD_ADDR bd_addr, BOOLEAN state);


/* Data received indication callback prototype. Parameters are
**              Source BD/Ethernet Address
**              Dest BD/Ethernet address
**              Protocol
**              Address of buffer (or data if non-GKI)
**              Length of data (non-GKI)
**              ext is flag to indicate whether it has aby extension headers
**              Flag used to indicate to forward on LAN
**                      FALSE - Use it for internal stack
**                      TRUE  - Send it across the ethernet as well
*/
typedef void (tPAN_DATA_IND_CB) (UINT16 handle,
                                 BD_ADDR src,
                                 BD_ADDR dst,
                                 UINT16 protocol,
                                 UINT8 *p_data,
                                 UINT16 len,
                                 BOOLEAN ext,
                                 BOOLEAN forward);


/* Data buffer received indication callback prototype. Parameters are
**              Source BD/Ethernet Address
**              Dest BD/Ethernet address
**              Protocol
**              pointer to the data buffer
**              ext is flag to indicate whether it has aby extension headers
**              Flag used to indicate to forward on LAN
**                      FALSE - Use it for internal stack
**                      TRUE  - Send it across the ethernet as well
*/
typedef void (tPAN_DATA_BUF_IND_CB) (UINT16 handle,
                                     BD_ADDR src,
                                     BD_ADDR dst,
                                     UINT16 protocol,
                                     BT_HDR *p_buf,
                                     BOOLEAN ext,
                                     BOOLEAN forward);


/* Flow control callback for TX data. Parameters are
**              Handle to the connection
**              Event  flow status
*/
typedef void (tPAN_TX_DATA_FLOW_CB) (UINT16 handle,
                                     tPAN_RESULT  event);

/* Filters received indication callback prototype. Parameters are
**              Handle to the connection
**              TRUE if the cb is called for indication
**              Ignore this if it is indication, otherwise it is the result
**                      for the filter set operation performed by the local
**                      device
**              Number of protocol filters present
**              Pointer to the filters start. Filters are present in pairs
**                      of start of the range and end of the range.
**                      They will be present in big endian order. First
**                      two bytes will be starting of the first range and
**                      next two bytes will be ending of the range.
*/
typedef void (tPAN_FILTER_IND_CB) (UINT16 handle,
                                   BOOLEAN indication,
                                   tBNEP_RESULT result,
                                   UINT16 num_filters,
                                   UINT8 *p_filters);


/* Multicast Filters received indication callback prototype. Parameters are
**              Handle to the connection
**              TRUE if the cb is called for indication
**              Ignore this if it is indication, otherwise it is the result
**                      for the filter set operation performed by the local
**                      device
**              Number of multicast filters present
**              Pointer to the filters start. Filters are present in pairs
**                      of start of the range and end of the range.
**                      First six bytes will be starting of the first range and
**                      next six bytes will be ending of the range.
*/
typedef void (tPAN_MFILTER_IND_CB) (UINT16 handle,
                                    BOOLEAN indication,
                                    tBNEP_RESULT result,
                                    UINT16 num_mfilters,
                                    UINT8 *p_mfilters);


/* This structure is used to register with PAN profile
** It is passed as a parameter to PAN_Register call.
*/
typedef struct
{
    tPAN_CONN_STATE_CB          *pan_conn_state_cb;     /* Connection state callback */
    tPAN_BRIDGE_REQ_CB          *pan_bridge_req_cb;     /* Bridge request callback */
    tPAN_DATA_IND_CB            *pan_data_ind_cb;       /* Data indication callback */
    tPAN_DATA_BUF_IND_CB        *pan_data_buf_ind_cb;   /* Data buffer indication callback */
    tPAN_FILTER_IND_CB          *pan_pfilt_ind_cb;      /* protocol filter indication callback */
    tPAN_MFILTER_IND_CB         *pan_mfilt_ind_cb;      /* multicast filter indication callback */
    tPAN_TX_DATA_FLOW_CB        *pan_tx_data_flow_cb;   /* data flow callback */
    char                        *user_service_name;     /* Service name for PANU role */
    char                        *gn_service_name;       /* Service name for GN role */
    char                        *nap_service_name;      /* Service name for NAP role */

} tPAN_REGISTER;


/*****************************************************************************
**  External Function Declarations
*****************************************************************************/
#ifdef __cplusplus
extern "C"
{
#endif

/*******************************************************************************
**
** Function         PAN_Register
**
** Description      This function is called by the application to register
**                  its callbacks with PAN profile. The application then
**                  should set the PAN role explicitly.
**
** Parameters:      p_register - contains all callback function pointers
**
**
** Returns          none
**
*******************************************************************************/
PAN_API extern void PAN_Register (tPAN_REGISTER *p_register);


/*******************************************************************************
**
** Function         PAN_Deregister
**
** Description      This function is called by the application to de-register
**                  its callbacks with PAN profile. This will make the PAN to
**                  become inactive. This will deregister PAN services from SDP
**                  and close all active connections
**
** Returns          none
**
*******************************************************************************/
PAN_API extern void PAN_Deregister (void);

/*******************************************************************************
**
** Function         PAN_SetRole
**
** Description      This function is called by the application to set the PAN
**                  profile role. This should be called after PAN_Register.
**                  This can be called any time to change the PAN role
**
** Parameters:      role        - is bit map of roles to be active
**                                      PAN_ROLE_CLIENT is for PANU role
**                                      PAN_ROLE_GN_SERVER is for GN role
**                                      PAN_ROLE_NAP_SERVER is for NAP role
**                  sec_mask    - Security mask for different roles
**                                      It is array of UINT8. The byte represent the
**                                      security for roles PANU, GN and NAP in order
**                  p_user_name - Service name for PANU role
**                  p_gn_name   - Service name for GN role
**                  p_nap_name  - Service name for NAP role
**                                      Can be NULL if user wants it to be default
**
** Returns          PAN_SUCCESS     - if the role is set successfully
**                  PAN_FAILURE     - if the role is not valid
**
*******************************************************************************/
PAN_API extern tPAN_RESULT PAN_SetRole (UINT8 role,
                                       UINT8 *sec_mask,
                                       char *p_user_name,
                                       char *p_gn_name,
                                       char *p_nap_name);

/*******************************************************************************
**
** Function         PAN_Connect
**
** Description      This function is called by the application to initiate a
**                  connection to the remote device
**
** Parameters:      rem_bda     - BD Addr of the remote device
**                  src_role    - Role of the local device for the connection
**                  dst_role    - Role of the remote device for the connection
**                                      PAN_ROLE_CLIENT is for PANU role
**                                      PAN_ROLE_GN_SERVER is for GN role
**                                      PAN_ROLE_NAP_SERVER is for NAP role
**                  *handle     - Pointer for returning Handle to the connection
**
** Returns          PAN_SUCCESS      - if the connection is initiated successfully
**                  PAN_NO_RESOURCES - resources are not sufficent
**                  PAN_FAILURE      - if the connection cannot be initiated
**                                           this can be because of the combination of
**                                           src and dst roles may not be valid or
**                                           allowed at that point of time
**
*******************************************************************************/
PAN_API extern tPAN_RESULT PAN_Connect (BD_ADDR rem_bda, UINT8 src_role, UINT8 dst_role, UINT16 *handle);

/*******************************************************************************
**
** Function         PAN_Disconnect
**
** Description      This is used to disconnect the connection
**
** Parameters:      handle           - handle for the connection
**
** Returns          PAN_SUCCESS      - if the connection is closed successfully
**                  PAN_FAILURE      - if the connection is not found or
**                                           there is an error in disconnecting
**
*******************************************************************************/
PAN_API extern tPAN_RESULT PAN_Disconnect (UINT16 handle);

/*******************************************************************************
**
** Function         PAN_Write
**
** Description      This sends data over the PAN connections. If this is called
**                  on GN or NAP side and the packet is multicast or broadcast
**                  it will be sent on all the links. Otherwise the correct link
**                  is found based on the destination address and forwarded on it
**                  If the return value is not PAN_SUCCESS the application should
**                  take care of releasing the message buffer
**
** Parameters:      dst      - MAC or BD Addr of the destination device
**                  src      - MAC or BD Addr of the source who sent this packet
**                  protocol - protocol of the ethernet packet like IP or ARP
**                  p_data   - pointer to the data
**                  len      - length of the data
**                  ext      - to indicate that extension headers present
**
** Returns          PAN_SUCCESS       - if the data is sent successfully
**                  PAN_FAILURE       - if the connection is not found or
**                                           there is an error in sending data
**
*******************************************************************************/
PAN_API extern tPAN_RESULT PAN_Write (UINT16 handle,
                                     BD_ADDR dst,
                                     BD_ADDR src,
                                     UINT16 protocol,
                                     UINT8 *p_data,
                                     UINT16 len,
                                     BOOLEAN ext);

/*******************************************************************************
**
** Function         PAN_WriteBuf
**
** Description      This sends data over the PAN connections. If this is called
**                  on GN or NAP side and the packet is multicast or broadcast
**                  it will be sent on all the links. Otherwise the correct link
**                  is found based on the destination address and forwarded on it
**                  If the return value is not PAN_SUCCESS the application should
**                  take care of releasing the message buffer
**
** Parameters:      dst      - MAC or BD Addr of the destination device
**                  src      - MAC or BD Addr of the source who sent this packet
**                  protocol - protocol of the ethernet packet like IP or ARP
**                  p_buf    - pointer to the data buffer
**                  ext      - to indicate that extension headers present
**
** Returns          PAN_SUCCESS       - if the data is sent successfully
**                  PAN_FAILURE       - if the connection is not found or
**                                           there is an error in sending data
**
*******************************************************************************/
PAN_API extern tPAN_RESULT PAN_WriteBuf (UINT16 handle,
                                        BD_ADDR dst,
                                        BD_ADDR src,
                                        UINT16 protocol,
                                        BT_HDR *p_buf,
                                        BOOLEAN ext);

/*******************************************************************************
**
** Function         PAN_SetProtocolFilters
**
** Description      This function is used to set protocol filters on the peer
**
** Parameters:      handle      - handle for the connection
**                  num_filters - number of protocol filter ranges
**                  start       - array of starting protocol numbers
**                  end         - array of ending protocol numbers
**
**
** Returns          PAN_SUCCESS        if protocol filters are set successfully
**                  PAN_FAILURE        if connection not found or error in setting
**
*******************************************************************************/
PAN_API extern tPAN_RESULT PAN_SetProtocolFilters (UINT16 handle,
                                                  UINT16 num_filters,
                                                  UINT16 *p_start_array,
                                                  UINT16 *p_end_array);

/*******************************************************************************
**
** Function         PAN_SetMulticastFilters
**
** Description      This function is used to set multicast filters on the peer
**
** Parameters:      handle      - handle for the connection
**                  num_filters - number of multicast filter ranges
**                  p_start_array - Pointer to sequence of beginings of all
**                                         multicast address ranges
**                  p_end_array   - Pointer to sequence of ends of all
**                                         multicast address ranges
**
**
** Returns          PAN_SUCCESS        if multicast filters are set successfully
**                  PAN_FAILURE        if connection not found or error in setting
**
*******************************************************************************/
PAN_API extern tBNEP_RESULT PAN_SetMulticastFilters (UINT16 handle,
                                                    UINT16 num_mcast_filters,
                                                    UINT8 *p_start_array,
                                                    UINT8 *p_end_array);

/*******************************************************************************
**
** Function         PAN_SetTraceLevel
**
** Description      This function sets the trace level for PAN. If called with
**                  a value of 0xFF, it simply reads the current trace level.
**
** Returns          the new (current) trace level
**
*******************************************************************************/
PAN_API extern UINT8 PAN_SetTraceLevel (UINT8 new_level);

/*******************************************************************************
**
** Function         PAN_Init
**
** Description      This function initializes the PAN unit. It should be called
**                  before accessing any other APIs to initialize the control
**                  block.
**
** Returns          void
**
*******************************************************************************/
PAN_API extern void PAN_Init (void);

#ifdef __cplusplus
}
#endif

#endif  /* PAN_API_H */