blob: b7488037940f6ae801a1ee965851ee2ff29792bf [file] [log] [blame]
/* Copyright (c) 2015-2018, The Linux Foundation. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials provided
* with the distribution.
* * Neither the name of The Linux Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
* BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
* OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
* IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <debug.h>
#include <platform/iomap.h>
#include <reg.h>
#include <target.h>
#include <platform.h>
#include <uart_dm.h>
#include <mmc.h>
#include <platform/gpio.h>
#include <dev/keys.h>
#include <spmi_v2.h>
#include <pm8x41.h>
#include <pm8x41_hw.h>
#include <board.h>
#include <baseband.h>
#include <hsusb.h>
#include <scm.h>
#include <platform/gpio.h>
#include <platform/gpio.h>
#include <platform/irqs.h>
#include <platform/clock.h>
#include <platform/timer.h>
#include <crypto5_wrapper.h>
#include <partition_parser.h>
#include <stdlib.h>
#include <rpm-smd.h>
#include <spmi.h>
#include <sdhci_msm.h>
#include <clock.h>
#include <boot_device.h>
#include <secapp_loader.h>
#include <rpmb.h>
#include <smem.h>
#include "target/display.h"
#if LONG_PRESS_POWER_ON
#include <shutdown_detect.h>
#endif
#if PON_VIB_SUPPORT
#include <vibrator.h>
#endif
#if PON_VIB_SUPPORT
#define VIBRATE_TIME 250
#endif
#define PMIC_ARB_CHANNEL_NUM 0
#define PMIC_ARB_OWNER_ID 0
#define TLMM_VOL_UP_BTN_GPIO 85
#define TLMM_VOL_UP_BTN_GPIO_8956 113
#define TLMM_VOL_UP_BTN_GPIO_8937 91
#define TLMM_VOL_DOWN_BTN_GPIO 128
#define FASTBOOT_MODE 0x77665500
#define RECOVERY_MODE 0x77665502
#define PON_SOFT_RB_SPARE 0x88F
#define EXT4_CMDLINE " rootfstype=ext4 root=/dev/mmcblk0p"
#define CE1_INSTANCE 1
#define CE_EE 1
#define CE_FIFO_SIZE 64
#define CE_READ_PIPE 3
#define CE_WRITE_PIPE 2
#define CE_READ_PIPE_LOCK_GRP 0
#define CE_WRITE_PIPE_LOCK_GRP 0
#define CE_ARRAY_SIZE 20
#define SUB_TYPE_SKUT 0x0A
#define SMBCHG_USB_RT_STS 0x21310
#define USBIN_UV_RT_STS BIT(0)
#define USBIN_UV_RT_STS_PMI632 BIT(2)
struct mmc_device *dev;
static uint32_t mmc_pwrctl_base[] =
{ MSM_SDC1_BASE, MSM_SDC2_BASE };
static uint32_t mmc_sdhci_base[] =
{ MSM_SDC1_SDHCI_BASE, MSM_SDC2_SDHCI_BASE };
static uint32_t mmc_sdc_pwrctl_irq[] =
{ SDCC1_PWRCTL_IRQ, SDCC2_PWRCTL_IRQ };
void target_early_init(void)
{
#if WITH_DEBUG_UART
uart_dm_init(2, 0, BLSP1_UART1_BASE);
#endif
}
static void set_sdc_power_ctrl()
{
/* Drive strength configs for sdc pins */
struct tlmm_cfgs sdc1_hdrv_cfg[] =
{
{ SDC1_CLK_HDRV_CTL_OFF, TLMM_CUR_VAL_16MA, TLMM_HDRV_MASK, 0},
{ SDC1_CMD_HDRV_CTL_OFF, TLMM_CUR_VAL_10MA, TLMM_HDRV_MASK, 0},
{ SDC1_DATA_HDRV_CTL_OFF, TLMM_CUR_VAL_10MA, TLMM_HDRV_MASK , 0},
};
/* Pull configs for sdc pins */
struct tlmm_cfgs sdc1_pull_cfg[] =
{
{ SDC1_CLK_PULL_CTL_OFF, TLMM_NO_PULL, TLMM_PULL_MASK, 0},
{ SDC1_CMD_PULL_CTL_OFF, TLMM_PULL_UP, TLMM_PULL_MASK, 0},
{ SDC1_DATA_PULL_CTL_OFF, TLMM_PULL_UP, TLMM_PULL_MASK, 0},
};
struct tlmm_cfgs sdc1_rclk_cfg[] =
{
{ SDC1_RCLK_PULL_CTL_OFF, TLMM_PULL_DOWN, TLMM_PULL_MASK, 0},
};
/* Set the drive strength & pull control values */
tlmm_set_hdrive_ctrl(sdc1_hdrv_cfg, ARRAY_SIZE(sdc1_hdrv_cfg));
tlmm_set_pull_ctrl(sdc1_pull_cfg, ARRAY_SIZE(sdc1_pull_cfg));
tlmm_set_pull_ctrl(sdc1_rclk_cfg, ARRAY_SIZE(sdc1_rclk_cfg));
}
void target_sdc_init()
{
struct mmc_config_data config;
/* Set drive strength & pull ctrl values */
set_sdc_power_ctrl();
/* Try slot 1*/
config.slot = 1;
config.bus_width = DATA_BUS_WIDTH_8BIT;
config.max_clk_rate = MMC_CLK_192MHZ;
config.sdhc_base = mmc_sdhci_base[config.slot - 1];
config.pwrctl_base = mmc_pwrctl_base[config.slot - 1];
config.pwr_irq = mmc_sdc_pwrctl_irq[config.slot - 1];
config.hs400_support = 1;
if (!(dev = mmc_init(&config))) {
/* Try slot 2 */
config.slot = 2;
config.max_clk_rate = MMC_CLK_200MHZ;
config.sdhc_base = mmc_sdhci_base[config.slot - 1];
config.pwrctl_base = mmc_pwrctl_base[config.slot - 1];
config.pwr_irq = mmc_sdc_pwrctl_irq[config.slot - 1];
config.hs400_support = 0;
if (!(dev = mmc_init(&config))) {
dprintf(CRITICAL, "mmc init failed!");
ASSERT(0);
}
}
}
void *target_mmc_device()
{
return (void *) dev;
}
/* Return 1 if vol_up pressed */
int target_volume_up()
{
static uint8_t first_time = 0;
uint8_t status = 0;
uint32_t vol_up_gpio;
if(platform_is_msm8956())
vol_up_gpio = TLMM_VOL_UP_BTN_GPIO_8956;
else if(platform_is_msm8937() || platform_is_msm8917() ||
platform_is_sdm429() || platform_is_sdm439())
vol_up_gpio = TLMM_VOL_UP_BTN_GPIO_8937;
else
vol_up_gpio = TLMM_VOL_UP_BTN_GPIO;
if (!first_time) {
gpio_tlmm_config(vol_up_gpio, 0, GPIO_INPUT, GPIO_PULL_UP, GPIO_2MA, GPIO_ENABLE);
/* Wait for the gpio config to take effect - debounce time */
udelay(10000);
first_time = 1;
}
/* Get status of GPIO */
status = gpio_status(vol_up_gpio);
/* Active low signal. */
return !status;
}
/* Return 1 if vol_down pressed */
uint32_t target_volume_down()
{
static bool vol_down_key_init = false;
if ((board_hardware_id() == HW_PLATFORM_QRD) &&
(board_hardware_subtype() == SUB_TYPE_SKUT)) {
uint32_t status = 0;
if (!vol_down_key_init) {
gpio_tlmm_config(TLMM_VOL_DOWN_BTN_GPIO, 0, GPIO_INPUT, GPIO_PULL_UP,
GPIO_2MA, GPIO_ENABLE);
/* Wait for the gpio config to take effect - debounce time */
thread_sleep(10);
vol_down_key_init = true;
}
/* Get status of GPIO */
status = gpio_status(TLMM_VOL_DOWN_BTN_GPIO);
/* Active low signal. */
return !status;
} else {
/* Volume down button tied in with PMIC RESIN. */
return pm8x41_resin_status();
}
}
uint32_t target_is_pwrkey_pon_reason()
{
uint32_t pmic = target_get_pmic();
uint8_t pon_reason = 0;
bool usb_present_sts = 0;
if (pmic == PMIC_IS_PMI632)
{
pon_reason = pmi632_get_pon_reason();
usb_present_sts = !(USBIN_UV_RT_STS_PMI632 &
pm8x41_reg_read(SMBCHG_USB_RT_STS));
}
else
{
pon_reason = pm8950_get_pon_reason();
usb_present_sts = !(USBIN_UV_RT_STS &
pm8x41_reg_read(SMBCHG_USB_RT_STS));
}
if (pm8x41_get_is_cold_boot() && ((pon_reason == KPDPWR_N) || (pon_reason == (KPDPWR_N|PON1))))
return 1;
else if ((pon_reason == PON1) && (!usb_present_sts))
return 1;
else
return 0;
}
static void target_keystatus()
{
keys_init();
if(target_volume_down())
keys_post_event(KEY_VOLUMEDOWN, 1);
if(target_volume_up())
keys_post_event(KEY_VOLUMEUP, 1);
}
void target_init(void)
{
dprintf(INFO, "target_init()\n");
spmi_init(PMIC_ARB_CHANNEL_NUM, PMIC_ARB_OWNER_ID);
if(target_is_pmi_enabled())
{
if(platform_is_msm8937() || platform_is_msm8917() ||
platform_is_sdm429() || platform_is_sdm439())
{
uint8_t pmi_rev = 0;
uint32_t pmi_type = 0;
pmi_type = board_pmic_target(1) & PMIC_TYPE_MASK;
if(pmi_type == PMIC_IS_PMI8950)
{
/* read pmic spare register for rev */
pmi_rev = pmi8950_get_pmi_subtype();
if(pmi_rev)
board_pmi_target_set(1,pmi_rev);
}
}
}
target_keystatus();
target_sdc_init();
if (partition_read_table())
{
dprintf(CRITICAL, "Error reading the partition table info\n");
ASSERT(0);
}
#if LONG_PRESS_POWER_ON
if(target_is_pmi_enabled())
shutdown_detect();
#endif
#if PON_VIB_SUPPORT
/* turn on vibrator to indicate that phone is booting up to end user */
if(target_is_pmi_enabled())
vib_timed_turn_on(VIBRATE_TIME);
#endif
if (target_use_signed_kernel())
target_crypto_init_params();
#if VERIFIED_BOOT
if (VB_M <= target_get_vb_version())
{
clock_ce_enable(CE1_INSTANCE);
/* Initialize Qseecom */
if (qseecom_init() < 0)
{
dprintf(CRITICAL, "Failed to initialize qseecom\n");
ASSERT(0);
}
/* Start Qseecom */
if (qseecom_tz_init() < 0)
{
dprintf(CRITICAL, "Failed to start qseecom\n");
ASSERT(0);
}
if (rpmb_init() < 0)
{
dprintf(CRITICAL, "RPMB init failed\n");
ASSERT(0);
}
/*
* Load the sec app for first time
*/
if (load_sec_app() < 0)
{
dprintf(CRITICAL, "Failed to load App for verified\n");
ASSERT(0);
}
}
#endif
#if SMD_SUPPORT
rpm_smd_init();
#endif
}
void target_serialno(unsigned char *buf)
{
uint32_t serialno;
if (target_is_emmc_boot()) {
serialno = mmc_get_psn();
snprintf((char *)buf, 13, "%x", serialno);
}
}
unsigned board_machtype(void)
{
return LINUX_MACHTYPE_UNKNOWN;
}
/* Detect the target type */
void target_detect(struct board_data *board)
{
/* This is already filled as part of board.c */
}
/* Detect the modem type */
void target_baseband_detect(struct board_data *board)
{
uint32_t platform;
platform = board->platform;
switch(platform) {
case MSM8952:
case MSM8956:
case MSM8976:
case MSM8937:
case MSM8940:
case MSM8917:
case MSM8920:
case MSM8217:
case MSM8617:
case SDM429:
case SDM439:
board->baseband = BASEBAND_MSM;
break;
case APQ8052:
case APQ8056:
case APQ8076:
case APQ8037:
case APQ8017:
board->baseband = BASEBAND_APQ;
break;
default:
dprintf(CRITICAL, "Platform type: %u is not supported\n",platform);
ASSERT(0);
};
}
unsigned target_baseband()
{
return board_baseband();
}
int set_download_mode(enum reboot_reason mode)
{
int ret = 0;
ret = scm_dload_mode(mode);
pm8x41_clear_pmic_watchdog();
return ret;
}
int emmc_recovery_init(void)
{
return _emmc_recovery_init();
}
unsigned target_pause_for_battery_charge(void)
{
uint32_t pmic = target_get_pmic();
uint8_t pon_reason = pm8x41_get_pon_reason();
uint8_t is_cold_boot = pm8x41_get_is_cold_boot();
bool usb_present_sts = 1; /* don't care by default */
if (target_is_pmi_enabled())
{
if (pmic == PMIC_IS_PMI632)
usb_present_sts = !(USBIN_UV_RT_STS_PMI632 &
pm8x41_reg_read(SMBCHG_USB_RT_STS));
else
usb_present_sts = (!(USBIN_UV_RT_STS &
pm8x41_reg_read(SMBCHG_USB_RT_STS)));
}
dprintf(INFO, "%s : pon_reason is:0x%x cold_boot:%d usb_sts:%d\n", __func__,
pon_reason, is_cold_boot, usb_present_sts);
/* In case of fastboot reboot,adb reboot or if we see the power key
* pressed we do not want go into charger mode.
* fastboot reboot is warm boot with PON hard reset bit not set
* adb reboot is a cold boot with PON hard reset bit set
*/
if (is_cold_boot &&
(!(pon_reason & HARD_RST)) &&
(!(pon_reason & KPDPWR_N)) &&
usb_present_sts)
return 1;
else
return 0;
}
void target_uninit(void)
{
#if PON_VIB_SUPPORT
if(target_is_pmi_enabled())
turn_off_vib_early();
#endif
mmc_put_card_to_sleep(dev);
sdhci_mode_disable(&dev->host);
if (crypto_initialized())
{
crypto_eng_cleanup();
clock_ce_disable(CE1_INSTANCE);
}
if (target_is_ssd_enabled())
clock_ce_disable(CE1_INSTANCE);
#if VERIFIED_BOOT
if (VB_M <= target_get_vb_version())
{
if (is_sec_app_loaded())
{
if (send_milestone_call_to_tz() < 0)
{
dprintf(CRITICAL, "Failed to unload App for rpmb\n");
ASSERT(0);
}
}
if (rpmb_uninit() < 0)
{
dprintf(CRITICAL, "RPMB uninit failed\n");
ASSERT(0);
}
clock_ce_disable(CE1_INSTANCE);
}
#endif
#if SMD_SUPPORT
rpm_smd_uninit();
#endif
}
void target_usb_init(void)
{
uint32_t val;
/* Select and enable external configuration with USB PHY */
ulpi_write(ULPI_MISC_A_VBUSVLDEXTSEL | ULPI_MISC_A_VBUSVLDEXT, ULPI_MISC_A_SET);
/* Enable sess_vld */
val = readl(USB_GENCONFIG_2) | GEN2_SESS_VLD_CTRL_EN;
writel(val, USB_GENCONFIG_2);
/* Enable external vbus configuration in the LINK */
val = readl(USB_USBCMD);
val |= SESS_VLD_CTRL;
writel(val, USB_USBCMD);
}
void target_usb_stop(void)
{
/* Disable VBUS mimicing in the controller. */
ulpi_write(ULPI_MISC_A_VBUSVLDEXTSEL | ULPI_MISC_A_VBUSVLDEXT, ULPI_MISC_A_CLEAR);
}
static uint8_t splash_override;
/* Returns 1 if target supports continuous splash screen. */
int target_cont_splash_screen()
{
uint8_t splash_screen = 0;
if (!splash_override) {
switch (board_hardware_id()) {
case HW_PLATFORM_MTP:
case HW_PLATFORM_SURF:
case HW_PLATFORM_RCM:
case HW_PLATFORM_QRD:
splash_screen = 1;
break;
default:
splash_screen = 0;
break;
}
dprintf(SPEW, "Target_cont_splash=%d\n", splash_screen);
}
return splash_screen;
}
void target_force_cont_splash_disable(uint8_t override)
{
splash_override = override;
}
uint8_t target_panel_auto_detect_enabled()
{
uint8_t ret = 0;
switch(board_hardware_id())
{
case HW_PLATFORM_QRD:
ret = platform_is_msm8956() ? 1 : 0;
break;
case HW_PLATFORM_SURF:
case HW_PLATFORM_MTP:
default:
ret = 0;
}
return ret;
}
/* Do any target specific intialization needed before entering fastboot mode */
void target_fastboot_init(void)
{
if (target_is_ssd_enabled()) {
clock_ce_enable(CE1_INSTANCE);
target_load_ssd_keystore();
}
}
void target_load_ssd_keystore(void)
{
uint64_t ptn;
int index;
uint64_t size;
uint32_t *buffer = NULL;
if (!target_is_ssd_enabled())
return;
index = partition_get_index("ssd");
ptn = partition_get_offset(index);
if (ptn == 0){
dprintf(CRITICAL, "Error: ssd partition not found\n");
return;
}
size = partition_get_size(index);
if (size == 0) {
dprintf(CRITICAL, "Error: invalid ssd partition size\n");
return;
}
buffer = memalign(CACHE_LINE, ROUNDUP(size, CACHE_LINE));
if (!buffer) {
dprintf(CRITICAL, "Error: allocating memory for ssd buffer\n");
return;
}
if (mmc_read(ptn, buffer, size)) {
dprintf(CRITICAL, "Error: cannot read data\n");
free(buffer);
return;
}
clock_ce_enable(CE1_INSTANCE);
scm_protect_keystore(buffer, size);
clock_ce_disable(CE1_INSTANCE);
free(buffer);
}
crypto_engine_type board_ce_type(void)
{
return CRYPTO_ENGINE_TYPE_HW;
}
/* Set up params for h/w CE. */
void target_crypto_init_params()
{
struct crypto_init_params ce_params;
/* Set up base addresses and instance. */
ce_params.crypto_instance = CE1_INSTANCE;
ce_params.crypto_base = MSM_CE1_BASE;
ce_params.bam_base = MSM_CE1_BAM_BASE;
/* Set up BAM config. */
ce_params.bam_ee = CE_EE;
ce_params.pipes.read_pipe = CE_READ_PIPE;
ce_params.pipes.write_pipe = CE_WRITE_PIPE;
ce_params.pipes.read_pipe_grp = CE_READ_PIPE_LOCK_GRP;
ce_params.pipes.write_pipe_grp = CE_WRITE_PIPE_LOCK_GRP;
/* Assign buffer sizes. */
ce_params.num_ce = CE_ARRAY_SIZE;
ce_params.read_fifo_size = CE_FIFO_SIZE;
ce_params.write_fifo_size = CE_FIFO_SIZE;
/* BAM is initialized by TZ for this platform.
* Do not do it again as the initialization address space
* is locked.
*/
ce_params.do_bam_init = 0;
crypto_init_params(&ce_params);
}
bool target_is_pmi_enabled(void)
{
if(platform_is_msm8917() &&
(board_hardware_subtype() == HW_PLATFORM_SUBTYPE_SAP_NOPMI))
return 0;
else
return 1;
}
#if _APPEND_CMDLINE
int get_target_boot_params(const char *cmdline, const char *part, char **buf)
{
int system_ptn_index = -1;
uint32_t buflen;
int ret = -1;
if (!cmdline || !part ) {
dprintf(CRITICAL, "WARN: Invalid input param\n");
return -1;
}
if (!strstr(cmdline, "root=/dev/ram")) /* This check is to handle kdev boot */
{
if (target_is_emmc_boot()) {
buflen = strlen(EXT4_CMDLINE) + sizeof(int) +1;
*buf = (char *)malloc(buflen);
if(!(*buf)) {
dprintf(CRITICAL,"Unable to allocate memory for boot params\n");
return -1;
}
/* Below is for emmc boot */
system_ptn_index = partition_get_index(part) + 1; /* Adding +1 as offsets for eMMC start at 1 and NAND at 0 */
if (system_ptn_index < 0) {
dprintf(CRITICAL,
"WARN: Cannot get partition index for %s\n", part);
free(*buf);
return -1;
}
snprintf(*buf, buflen, EXT4_CMDLINE"%d", system_ptn_index);
ret = 0;
}
}
/*in success case buf will be freed in the calling function of this*/
return ret;
}
#endif
uint32_t target_get_pmic()
{
if (target_is_pmi_enabled()) {
uint32_t pmi_type = board_pmic_target(1) & PMIC_TYPE_MASK;
if (pmi_type == PMIC_IS_PMI632)
return PMIC_IS_PMI632;
else
return PMIC_IS_PMI8950;
}
else {
return PMIC_IS_UNKNOWN;
}
}
void pmic_reset_configure(uint8_t reset_type)
{
uint32_t pmi_type;
pmi_type = target_get_pmic();
if (pmi_type == PMIC_IS_PMI632) {
pmi632_reset_configure(reset_type);
} else {
if(target_is_pmi_enabled()) {
pm8994_reset_configure(reset_type);
} else {
pm8x41_reset_configure(reset_type);
}
}
}