diff --git a/lib/lwip/doc/sys_arch.txt b/lib/lwip/doc/sys_arch.txt
new file mode 100644
index 0000000..95d0add
--- /dev/null
+++ b/lib/lwip/doc/sys_arch.txt
@@ -0,0 +1,194 @@
+sys_arch interface for lwIP 0.6++
+
+Author: Adam Dunkels
+
+The operating system emulation layer provides a common interface
+between the lwIP code and the underlying operating system kernel. The
+general idea is that porting lwIP to new architectures requires only
+small changes to a few header files and a new sys_arch
+implementation. It is also possible to do a sys_arch implementation
+that does not rely on any underlying operating system.
+
+The sys_arch provides semaphores and mailboxes to lwIP. For the full
+lwIP functionality, multiple threads support can be implemented in the
+sys_arch, but this is not required for the basic lwIP
+functionality. Previous versions of lwIP required the sys_arch to
+implement timer scheduling as well but as of lwIP 0.5 this is
+implemented in a higher layer.
+
+In addition to the source file providing the functionality of sys_arch,
+the OS emulation layer must provide several header files defining
+macros used throughout lwip.  The files required and the macros they
+must define are listed below the sys_arch description.
+
+Semaphores can be either counting or binary - lwIP works with both
+kinds. Mailboxes are used for message passing and can be implemented
+either as a queue which allows multiple messages to be posted to a
+mailbox, or as a rendez-vous point where only one message can be
+posted at a time. lwIP works with both kinds, but the former type will
+be more efficient. A message in a mailbox is just a pointer, nothing
+more. 
+
+Semaphores are represented by the type "sys_sem_t" which is typedef'd
+in the sys_arch.h file. Mailboxes are equivalently represented by the
+type "sys_mbox_t". lwIP does not place any restrictions on how
+sys_sem_t or sys_mbox_t are represented internally.
+
+The following functions must be implemented by the sys_arch:
+
+- void sys_init(void)
+
+  Is called to initialize the sys_arch layer.
+
+- sys_sem_t sys_sem_new(u8_t count)
+
+  Creates and returns a new semaphore. The "count" argument specifies
+  the initial state of the semaphore.
+
+- void sys_sem_free(sys_sem_t sem)
+
+  Deallocates a semaphore.
+
+- void sys_sem_signal(sys_sem_t sem)
+
+  Signals a semaphore.
+
+- u32_t sys_arch_sem_wait(sys_sem_t sem, u32_t timeout)
+
+  Blocks the thread while waiting for the semaphore to be
+  signaled. If the "timeout" argument is non-zero, the thread should
+  only be blocked for the specified time (measured in
+  milliseconds).
+
+  If the timeout argument is non-zero, the return value is the number of
+  milliseconds spent waiting for the semaphore to be signaled. If the
+  semaphore wasn't signaled within the specified time, the return value is
+  SYS_ARCH_TIMEOUT. If the thread didn't have to wait for the semaphore
+  (i.e., it was already signaled), the function may return zero.
+
+  Notice that lwIP implements a function with a similar name,
+  sys_sem_wait(), that uses the sys_arch_sem_wait() function.
+
+- sys_mbox_t sys_mbox_new(void)
+
+  Creates an empty mailbox.
+
+- void sys_mbox_free(sys_mbox_t mbox)
+
+  Deallocates a mailbox. If there are messages still present in the
+  mailbox when the mailbox is deallocated, it is an indication of a
+  programming error in lwIP and the developer should be notified.
+
+- void sys_mbox_post(sys_mbox_t mbox, void *msg)
+
+  Posts the "msg" to the mailbox.
+
+- u32_t sys_arch_mbox_fetch(sys_mbox_t mbox, void **msg, u32_t timeout)
+
+  Blocks the thread until a message arrives in the mailbox, but does
+  not block the thread longer than "timeout" milliseconds (similar to
+  the sys_arch_sem_wait() function). The "msg" argument is a result
+  parameter that is set by the function (i.e., by doing "*msg =
+  ptr"). The "msg" parameter maybe NULL to indicate that the message
+  should be dropped.
+
+  The return values are the same as for the sys_arch_sem_wait() function:
+  Number of milliseconds spent waiting or SYS_ARCH_TIMEOUT if there was a
+  timeout.
+
+  Note that a function with a similar name, sys_mbox_fetch(), is
+  implemented by lwIP. 
+  
+- struct sys_timeouts *sys_arch_timeouts(void)
+
+  Returns a pointer to the per-thread sys_timeouts structure. In lwIP,
+  each thread has a list of timeouts which is repressented as a linked
+  list of sys_timeout structures. The sys_timeouts structure holds a
+  pointer to a linked list of timeouts. This function is called by
+  the lwIP timeout scheduler and must not return a NULL value. 
+
+  In a single threadd sys_arch implementation, this function will
+  simply return a pointer to a global sys_timeouts variable stored in
+  the sys_arch module.
+  
+If threads are supported by the underlying operating system and if
+such functionality is needed in lwIP, the following function will have
+to be implemented as well:
+
+- sys_thread_t sys_thread_new(void (* thread)(void *arg), void *arg, int prio)
+
+  Starts a new thread with priority "prio" that will begin its execution in the
+  function "thread()". The "arg" argument will be passed as an argument to the
+  thread() function. The id of the new thread is returned. Both the id and
+  the priority are system dependent.
+
+- sys_prot_t sys_arch_protect(void)
+
+  This optional function does a "fast" critical region protection and returns
+  the previous protection level. This function is only called during very short
+  critical regions. An embedded system which supports ISR-based drivers might
+  want to implement this function by disabling interrupts. Task-based systems
+  might want to implement this by using a mutex or disabling tasking. This
+  function should support recursive calls from the same task or interrupt. In
+  other words, sys_arch_protect() could be called while already protected. In
+  that case the return value indicates that it is already protected.
+
+  sys_arch_protect() is only required if your port is supporting an operating
+  system.
+
+- void sys_arch_unprotect(sys_prot_t pval)
+
+  This optional function does a "fast" set of critical region protection to the
+  value specified by pval. See the documentation for sys_arch_protect() for
+  more information. This function is only required if your port is supporting
+  an operating system.
+
+-------------------------------------------------------------------------------
+Additional files required for the "OS support" emulation layer:
+-------------------------------------------------------------------------------
+
+cc.h       - Architecture environment, some compiler specific, some
+             environment specific (probably should move env stuff 
+             to sys_arch.h.)
+
+  Typedefs for the types used by lwip -
+    u8_t, s8_t, u16_t, s16_t, u32_t, s32_t, mem_ptr_t
+
+  Compiler hints for packing lwip's structures -
+    PACK_STRUCT_FIELD(x)
+    PACK_STRUCT_STRUCT
+    PACK_STRUCT_BEGIN
+    PACK_STRUCT_END
+
+  Platform specific diagnostic output -
+    LWIP_PLATFORM_DIAG(x)    - non-fatal, print a message.
+    LWIP_PLATFORM_ASSERT(x)  - fatal, print message and abandon execution.
+
+  "lightweight" synchronization mechanisms -
+    SYS_ARCH_DECL_PROTECT(x) - declare a protection state variable.
+    SYS_ARCH_PROTECT(x)      - enter protection mode.
+    SYS_ARCH_UNPROTECT(x)    - leave protection mode.
+
+  If the compiler does not provide memset() this file must include a
+  definition of it, or include a file which defines it.
+
+  This file must either include a system-local <errno.h> which defines
+  the standard *nix error codes, or it should #define LWIP_PROVIDE_ERRNO
+  to make lwip/arch.h define the codes which are used throughout.
+
+
+perf.h     - Architecture specific performance measurement.
+  Measurement calls made throughout lwip, these can be defined to nothing.
+    PERF_START               - start measuring something.
+    PERF_STOP(x)             - stop measuring something, and record the result.
+
+sys_arch.h - Tied to sys_arch.c
+
+  Arch dependent types for the following objects:
+    sys_sem_t, sys_mbox_t, sys_thread_t,
+  And, optionally:
+    sys_prot_t
+
+  Defines to set vars of sys_mbox_t and sys_sem_t to NULL.
+    SYS_MBOX_NULL NULL
+    SYS_SEM_NULL NULL