| /* apps/s_server.c */ |
| /* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) |
| * All rights reserved. |
| * |
| * This package is an SSL implementation written |
| * by Eric Young (eay@cryptsoft.com). |
| * The implementation was written so as to conform with Netscapes SSL. |
| * |
| * This library is free for commercial and non-commercial use as long as |
| * the following conditions are aheared to. The following conditions |
| * apply to all code found in this distribution, be it the RC4, RSA, |
| * lhash, DES, etc., code; not just the SSL code. The SSL documentation |
| * included with this distribution is covered by the same copyright terms |
| * except that the holder is Tim Hudson (tjh@cryptsoft.com). |
| * |
| * Copyright remains Eric Young's, and as such any Copyright notices in |
| * the code are not to be removed. |
| * If this package is used in a product, Eric Young should be given attribution |
| * as the author of the parts of the library used. |
| * This can be in the form of a textual message at program startup or |
| * in documentation (online or textual) provided with the package. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the copyright |
| * notice, this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * 3. All advertising materials mentioning features or use of this software |
| * must display the following acknowledgement: |
| * "This product includes cryptographic software written by |
| * Eric Young (eay@cryptsoft.com)" |
| * The word 'cryptographic' can be left out if the rouines from the library |
| * being used are not cryptographic related :-). |
| * 4. If you include any Windows specific code (or a derivative thereof) from |
| * the apps directory (application code) you must include an acknowledgement: |
| * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" |
| * |
| * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND |
| * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE |
| * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT |
| * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY |
| * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF |
| * SUCH DAMAGE. |
| * |
| * The licence and distribution terms for any publically available version or |
| * derivative of this code cannot be changed. i.e. this code cannot simply be |
| * copied and put under another distribution licence |
| * [including the GNU Public Licence.] |
| */ |
| /* ==================================================================== |
| * Copyright (c) 1998-2006 The OpenSSL Project. All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in |
| * the documentation and/or other materials provided with the |
| * distribution. |
| * |
| * 3. All advertising materials mentioning features or use of this |
| * software must display the following acknowledgment: |
| * "This product includes software developed by the OpenSSL Project |
| * for use in the OpenSSL Toolkit. (http://www.openssl.org/)" |
| * |
| * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to |
| * endorse or promote products derived from this software without |
| * prior written permission. For written permission, please contact |
| * openssl-core@openssl.org. |
| * |
| * 5. Products derived from this software may not be called "OpenSSL" |
| * nor may "OpenSSL" appear in their names without prior written |
| * permission of the OpenSSL Project. |
| * |
| * 6. Redistributions of any form whatsoever must retain the following |
| * acknowledgment: |
| * "This product includes software developed by the OpenSSL Project |
| * for use in the OpenSSL Toolkit (http://www.openssl.org/)" |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY |
| * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR |
| * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR |
| * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT |
| * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
| * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, |
| * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
| * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED |
| * OF THE POSSIBILITY OF SUCH DAMAGE. |
| * ==================================================================== |
| * |
| * This product includes cryptographic software written by Eric Young |
| * (eay@cryptsoft.com). This product includes software written by Tim |
| * Hudson (tjh@cryptsoft.com). |
| * |
| */ |
| /* ==================================================================== |
| * Copyright 2002 Sun Microsystems, Inc. ALL RIGHTS RESERVED. |
| * ECC cipher suite support in OpenSSL originally developed by |
| * SUN MICROSYSTEMS, INC., and contributed to the OpenSSL project. |
| */ |
| /* ==================================================================== |
| * Copyright 2005 Nokia. All rights reserved. |
| * |
| * The portions of the attached software ("Contribution") is developed by |
| * Nokia Corporation and is licensed pursuant to the OpenSSL open source |
| * license. |
| * |
| * The Contribution, originally written by Mika Kousa and Pasi Eronen of |
| * Nokia Corporation, consists of the "PSK" (Pre-Shared Key) ciphersuites |
| * support (see RFC 4279) to OpenSSL. |
| * |
| * No patent licenses or other rights except those expressly stated in |
| * the OpenSSL open source license shall be deemed granted or received |
| * expressly, by implication, estoppel, or otherwise. |
| * |
| * No assurances are provided by Nokia that the Contribution does not |
| * infringe the patent or other intellectual property rights of any third |
| * party or that the license provides you with all the necessary rights |
| * to make use of the Contribution. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. IN |
| * ADDITION TO THE DISCLAIMERS INCLUDED IN THE LICENSE, NOKIA |
| * SPECIFICALLY DISCLAIMS ANY LIABILITY FOR CLAIMS BROUGHT BY YOU OR ANY |
| * OTHER ENTITY BASED ON INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS OR |
| * OTHERWISE. |
| */ |
| |
| /* Until the key-gen callbacks are modified to use newer prototypes, we allow |
| * deprecated functions for openssl-internal code */ |
| #ifdef OPENSSL_NO_DEPRECATED |
| #undef OPENSSL_NO_DEPRECATED |
| #endif |
| |
| #include <assert.h> |
| #include <ctype.h> |
| #include <stdio.h> |
| #include <stdlib.h> |
| #include <string.h> |
| |
| #include <openssl/e_os2.h> |
| #ifdef OPENSSL_NO_STDIO |
| #define APPS_WIN16 |
| #endif |
| |
| #if !defined(OPENSSL_SYS_NETWARE) /* conflicts with winsock2 stuff on netware */ |
| #include <sys/types.h> |
| #endif |
| |
| /* With IPv6, it looks like Digital has mixed up the proper order of |
| recursive header file inclusion, resulting in the compiler complaining |
| that u_int isn't defined, but only if _POSIX_C_SOURCE is defined, which |
| is needed to have fileno() declared correctly... So let's define u_int */ |
| #if defined(OPENSSL_SYS_VMS_DECC) && !defined(__U_INT) |
| #define __U_INT |
| typedef unsigned int u_int; |
| #endif |
| |
| #include <openssl/lhash.h> |
| #include <openssl/bn.h> |
| #define USE_SOCKETS |
| #include "apps.h" |
| #include <openssl/err.h> |
| #include <openssl/pem.h> |
| #include <openssl/x509.h> |
| #include <openssl/ssl.h> |
| #include <openssl/rand.h> |
| #include <openssl/ocsp.h> |
| #ifndef OPENSSL_NO_DH |
| #include <openssl/dh.h> |
| #endif |
| #ifndef OPENSSL_NO_RSA |
| #include <openssl/rsa.h> |
| #endif |
| #include "s_apps.h" |
| #include "timeouts.h" |
| |
| #if (defined(OPENSSL_SYS_VMS) && __VMS_VER < 70000000) |
| /* FIONBIO used as a switch to enable ioctl, and that isn't in VMS < 7.0 */ |
| #undef FIONBIO |
| #endif |
| |
| #if defined(OPENSSL_SYS_BEOS_R5) |
| #include <fcntl.h> |
| #endif |
| |
| #ifndef OPENSSL_NO_RSA |
| static RSA MS_CALLBACK *tmp_rsa_cb(SSL *s, int is_export, int keylength); |
| #endif |
| static int sv_body(char *hostname, int s, unsigned char *context); |
| static int www_body(char *hostname, int s, unsigned char *context); |
| static void close_accept_socket(void ); |
| static void sv_usage(void); |
| static int init_ssl_connection(SSL *s); |
| static void print_stats(BIO *bp,SSL_CTX *ctx); |
| static int generate_session_id(const SSL *ssl, unsigned char *id, |
| unsigned int *id_len); |
| #ifndef OPENSSL_NO_DH |
| static DH *load_dh_param(const char *dhfile); |
| static DH *get_dh512(void); |
| #endif |
| |
| #ifdef MONOLITH |
| static void s_server_init(void); |
| #endif |
| |
| #ifndef OPENSSL_NO_DH |
| static unsigned char dh512_p[]={ |
| 0xDA,0x58,0x3C,0x16,0xD9,0x85,0x22,0x89,0xD0,0xE4,0xAF,0x75, |
| 0x6F,0x4C,0xCA,0x92,0xDD,0x4B,0xE5,0x33,0xB8,0x04,0xFB,0x0F, |
| 0xED,0x94,0xEF,0x9C,0x8A,0x44,0x03,0xED,0x57,0x46,0x50,0xD3, |
| 0x69,0x99,0xDB,0x29,0xD7,0x76,0x27,0x6B,0xA2,0xD3,0xD4,0x12, |
| 0xE2,0x18,0xF4,0xDD,0x1E,0x08,0x4C,0xF6,0xD8,0x00,0x3E,0x7C, |
| 0x47,0x74,0xE8,0x33, |
| }; |
| static unsigned char dh512_g[]={ |
| 0x02, |
| }; |
| |
| static DH *get_dh512(void) |
| { |
| DH *dh=NULL; |
| |
| if ((dh=DH_new()) == NULL) return(NULL); |
| dh->p=BN_bin2bn(dh512_p,sizeof(dh512_p),NULL); |
| dh->g=BN_bin2bn(dh512_g,sizeof(dh512_g),NULL); |
| if ((dh->p == NULL) || (dh->g == NULL)) |
| return(NULL); |
| return(dh); |
| } |
| #endif |
| |
| |
| /* static int load_CA(SSL_CTX *ctx, char *file);*/ |
| |
| #undef BUFSIZZ |
| #define BUFSIZZ 16*1024 |
| static int bufsize=BUFSIZZ; |
| static int accept_socket= -1; |
| |
| #define TEST_CERT "server.pem" |
| #ifndef OPENSSL_NO_TLSEXT |
| #define TEST_CERT2 "server2.pem" |
| #endif |
| #undef PROG |
| #define PROG s_server_main |
| |
| extern int verify_depth, verify_return_error; |
| |
| static char *cipher=NULL; |
| static int s_server_verify=SSL_VERIFY_NONE; |
| static int s_server_session_id_context = 1; /* anything will do */ |
| static const char *s_cert_file=TEST_CERT,*s_key_file=NULL; |
| #ifndef OPENSSL_NO_TLSEXT |
| static const char *s_cert_file2=TEST_CERT2,*s_key_file2=NULL; |
| #endif |
| static char *s_dcert_file=NULL,*s_dkey_file=NULL; |
| #ifdef FIONBIO |
| static int s_nbio=0; |
| #endif |
| static int s_nbio_test=0; |
| int s_crlf=0; |
| static SSL_CTX *ctx=NULL; |
| #ifndef OPENSSL_NO_TLSEXT |
| static SSL_CTX *ctx2=NULL; |
| #endif |
| static int www=0; |
| |
| static BIO *bio_s_out=NULL; |
| static int s_debug=0; |
| #ifndef OPENSSL_NO_TLSEXT |
| static int s_tlsextdebug=0; |
| static int s_tlsextstatus=0; |
| static int cert_status_cb(SSL *s, void *arg); |
| #endif |
| static int s_msg=0; |
| static int s_quiet=0; |
| |
| static int hack=0; |
| #ifndef OPENSSL_NO_ENGINE |
| static char *engine_id=NULL; |
| #endif |
| static const char *session_id_prefix=NULL; |
| |
| static int enable_timeouts = 0; |
| static long socket_mtu; |
| #ifndef OPENSSL_NO_DTLS1 |
| static int cert_chain = 0; |
| #endif |
| |
| #ifndef OPENSSL_NO_PSK |
| static char *psk_identity="Client_identity"; |
| char *psk_key=NULL; /* by default PSK is not used */ |
| |
| static unsigned int psk_server_cb(SSL *ssl, const char *identity, |
| unsigned char *psk, unsigned int max_psk_len) |
| { |
| unsigned int psk_len = 0; |
| int ret; |
| BIGNUM *bn = NULL; |
| |
| if (s_debug) |
| BIO_printf(bio_s_out,"psk_server_cb\n"); |
| if (!identity) |
| { |
| BIO_printf(bio_err,"Error: client did not send PSK identity\n"); |
| goto out_err; |
| } |
| if (s_debug) |
| BIO_printf(bio_s_out,"identity_len=%d identity=%s\n", |
| identity ? (int)strlen(identity) : 0, identity); |
| |
| /* here we could lookup the given identity e.g. from a database */ |
| if (strcmp(identity, psk_identity) != 0) |
| { |
| BIO_printf(bio_s_out, "PSK error: client identity not found" |
| " (got '%s' expected '%s')\n", identity, |
| psk_identity); |
| goto out_err; |
| } |
| if (s_debug) |
| BIO_printf(bio_s_out, "PSK client identity found\n"); |
| |
| /* convert the PSK key to binary */ |
| ret = BN_hex2bn(&bn, psk_key); |
| if (!ret) |
| { |
| BIO_printf(bio_err,"Could not convert PSK key '%s' to BIGNUM\n", psk_key); |
| if (bn) |
| BN_free(bn); |
| return 0; |
| } |
| if (BN_num_bytes(bn) > (int)max_psk_len) |
| { |
| BIO_printf(bio_err,"psk buffer of callback is too small (%d) for key (%d)\n", |
| max_psk_len, BN_num_bytes(bn)); |
| BN_free(bn); |
| return 0; |
| } |
| |
| ret = BN_bn2bin(bn, psk); |
| BN_free(bn); |
| |
| if (ret < 0) |
| goto out_err; |
| psk_len = (unsigned int)ret; |
| |
| if (s_debug) |
| BIO_printf(bio_s_out, "fetched PSK len=%d\n", psk_len); |
| return psk_len; |
| out_err: |
| if (s_debug) |
| BIO_printf(bio_err, "Error in PSK server callback\n"); |
| return 0; |
| } |
| #endif |
| |
| #ifdef MONOLITH |
| static void s_server_init(void) |
| { |
| accept_socket=-1; |
| cipher=NULL; |
| s_server_verify=SSL_VERIFY_NONE; |
| s_dcert_file=NULL; |
| s_dkey_file=NULL; |
| s_cert_file=TEST_CERT; |
| s_key_file=NULL; |
| #ifndef OPENSSL_NO_TLSEXT |
| s_cert_file2=TEST_CERT2; |
| s_key_file2=NULL; |
| ctx2=NULL; |
| #endif |
| #ifdef FIONBIO |
| s_nbio=0; |
| #endif |
| s_nbio_test=0; |
| ctx=NULL; |
| www=0; |
| |
| bio_s_out=NULL; |
| s_debug=0; |
| s_msg=0; |
| s_quiet=0; |
| hack=0; |
| #ifndef OPENSSL_NO_ENGINE |
| engine_id=NULL; |
| #endif |
| } |
| #endif |
| |
| static void sv_usage(void) |
| { |
| BIO_printf(bio_err,"usage: s_server [args ...]\n"); |
| BIO_printf(bio_err,"\n"); |
| BIO_printf(bio_err," -accept arg - port to accept on (default is %d)\n",PORT); |
| BIO_printf(bio_err," -context arg - set session ID context\n"); |
| BIO_printf(bio_err," -verify arg - turn on peer certificate verification\n"); |
| BIO_printf(bio_err," -Verify arg - turn on peer certificate verification, must have a cert.\n"); |
| BIO_printf(bio_err," -cert arg - certificate file to use\n"); |
| BIO_printf(bio_err," (default is %s)\n",TEST_CERT); |
| BIO_printf(bio_err," -crl_check - check the peer certificate has not been revoked by its CA.\n" \ |
| " The CRL(s) are appended to the certificate file\n"); |
| BIO_printf(bio_err," -crl_check_all - check the peer certificate has not been revoked by its CA\n" \ |
| " or any other CRL in the CA chain. CRL(s) are appened to the\n" \ |
| " the certificate file.\n"); |
| BIO_printf(bio_err," -certform arg - certificate format (PEM or DER) PEM default\n"); |
| BIO_printf(bio_err," -key arg - Private Key file to use, in cert file if\n"); |
| BIO_printf(bio_err," not specified (default is %s)\n",TEST_CERT); |
| BIO_printf(bio_err," -keyform arg - key format (PEM, DER or ENGINE) PEM default\n"); |
| BIO_printf(bio_err," -pass arg - private key file pass phrase source\n"); |
| BIO_printf(bio_err," -dcert arg - second certificate file to use (usually for DSA)\n"); |
| BIO_printf(bio_err," -dcertform x - second certificate format (PEM or DER) PEM default\n"); |
| BIO_printf(bio_err," -dkey arg - second private key file to use (usually for DSA)\n"); |
| BIO_printf(bio_err," -dkeyform arg - second key format (PEM, DER or ENGINE) PEM default\n"); |
| BIO_printf(bio_err," -dpass arg - second private key file pass phrase source\n"); |
| BIO_printf(bio_err," -dhparam arg - DH parameter file to use, in cert file if not specified\n"); |
| BIO_printf(bio_err," or a default set of parameters is used\n"); |
| #ifndef OPENSSL_NO_ECDH |
| BIO_printf(bio_err," -named_curve arg - Elliptic curve name to use for ephemeral ECDH keys.\n" \ |
| " Use \"openssl ecparam -list_curves\" for all names\n" \ |
| " (default is nistp256).\n"); |
| #endif |
| #ifdef FIONBIO |
| BIO_printf(bio_err," -nbio - Run with non-blocking IO\n"); |
| #endif |
| BIO_printf(bio_err," -nbio_test - test with the non-blocking test bio\n"); |
| BIO_printf(bio_err," -crlf - convert LF from terminal into CRLF\n"); |
| BIO_printf(bio_err," -debug - Print more output\n"); |
| BIO_printf(bio_err," -msg - Show protocol messages\n"); |
| BIO_printf(bio_err," -state - Print the SSL states\n"); |
| BIO_printf(bio_err," -CApath arg - PEM format directory of CA's\n"); |
| BIO_printf(bio_err," -CAfile arg - PEM format file of CA's\n"); |
| BIO_printf(bio_err," -nocert - Don't use any certificates (Anon-DH)\n"); |
| BIO_printf(bio_err," -cipher arg - play with 'openssl ciphers' to see what goes here\n"); |
| BIO_printf(bio_err," -serverpref - Use server's cipher preferences\n"); |
| BIO_printf(bio_err," -quiet - No server output\n"); |
| BIO_printf(bio_err," -no_tmp_rsa - Do not generate a tmp RSA key\n"); |
| #ifndef OPENSSL_NO_PSK |
| BIO_printf(bio_err," -psk_hint arg - PSK identity hint to use\n"); |
| BIO_printf(bio_err," -psk arg - PSK in hex (without 0x)\n"); |
| # ifndef OPENSSL_NO_JPAKE |
| BIO_printf(bio_err," -jpake arg - JPAKE secret to use\n"); |
| # endif |
| #endif |
| BIO_printf(bio_err," -ssl2 - Just talk SSLv2\n"); |
| BIO_printf(bio_err," -ssl3 - Just talk SSLv3\n"); |
| BIO_printf(bio_err," -tls1 - Just talk TLSv1\n"); |
| BIO_printf(bio_err," -dtls1 - Just talk DTLSv1\n"); |
| BIO_printf(bio_err," -timeout - Enable timeouts\n"); |
| BIO_printf(bio_err," -mtu - Set link layer MTU\n"); |
| BIO_printf(bio_err," -chain - Read a certificate chain\n"); |
| BIO_printf(bio_err," -no_ssl2 - Just disable SSLv2\n"); |
| BIO_printf(bio_err," -no_ssl3 - Just disable SSLv3\n"); |
| BIO_printf(bio_err," -no_tls1 - Just disable TLSv1\n"); |
| #ifndef OPENSSL_NO_DH |
| BIO_printf(bio_err," -no_dhe - Disable ephemeral DH\n"); |
| #endif |
| #ifndef OPENSSL_NO_ECDH |
| BIO_printf(bio_err," -no_ecdhe - Disable ephemeral ECDH\n"); |
| #endif |
| BIO_printf(bio_err," -bugs - Turn on SSL bug compatibility\n"); |
| BIO_printf(bio_err," -www - Respond to a 'GET /' with a status page\n"); |
| BIO_printf(bio_err," -WWW - Respond to a 'GET /<path> HTTP/1.0' with file ./<path>\n"); |
| BIO_printf(bio_err," -HTTP - Respond to a 'GET /<path> HTTP/1.0' with file ./<path>\n"); |
| BIO_printf(bio_err," with the assumption it contains a complete HTTP response.\n"); |
| #ifndef OPENSSL_NO_ENGINE |
| BIO_printf(bio_err," -engine id - Initialise and use the specified engine\n"); |
| #endif |
| BIO_printf(bio_err," -id_prefix arg - Generate SSL/TLS session IDs prefixed by 'arg'\n"); |
| BIO_printf(bio_err," -rand file%cfile%c...\n", LIST_SEPARATOR_CHAR, LIST_SEPARATOR_CHAR); |
| #ifndef OPENSSL_NO_TLSEXT |
| BIO_printf(bio_err," -servername host - servername for HostName TLS extension\n"); |
| BIO_printf(bio_err," -servername_fatal - on mismatch send fatal alert (default warning alert)\n"); |
| BIO_printf(bio_err," -cert2 arg - certificate file to use for servername\n"); |
| BIO_printf(bio_err," (default is %s)\n",TEST_CERT2); |
| BIO_printf(bio_err," -key2 arg - Private Key file to use for servername, in cert file if\n"); |
| BIO_printf(bio_err," not specified (default is %s)\n",TEST_CERT2); |
| BIO_printf(bio_err," -tlsextdebug - hex dump of all TLS extensions received\n"); |
| BIO_printf(bio_err," -no_ticket - disable use of RFC4507bis session tickets\n"); |
| BIO_printf(bio_err," -legacy_renegotiation - enable use of legacy renegotiation (dangerous)\n"); |
| #endif |
| } |
| |
| static int local_argc=0; |
| static char **local_argv; |
| |
| #ifdef CHARSET_EBCDIC |
| static int ebcdic_new(BIO *bi); |
| static int ebcdic_free(BIO *a); |
| static int ebcdic_read(BIO *b, char *out, int outl); |
| static int ebcdic_write(BIO *b, const char *in, int inl); |
| static long ebcdic_ctrl(BIO *b, int cmd, long num, void *ptr); |
| static int ebcdic_gets(BIO *bp, char *buf, int size); |
| static int ebcdic_puts(BIO *bp, const char *str); |
| |
| #define BIO_TYPE_EBCDIC_FILTER (18|0x0200) |
| static BIO_METHOD methods_ebcdic= |
| { |
| BIO_TYPE_EBCDIC_FILTER, |
| "EBCDIC/ASCII filter", |
| ebcdic_write, |
| ebcdic_read, |
| ebcdic_puts, |
| ebcdic_gets, |
| ebcdic_ctrl, |
| ebcdic_new, |
| ebcdic_free, |
| }; |
| |
| typedef struct |
| { |
| size_t alloced; |
| char buff[1]; |
| } EBCDIC_OUTBUFF; |
| |
| BIO_METHOD *BIO_f_ebcdic_filter() |
| { |
| return(&methods_ebcdic); |
| } |
| |
| static int ebcdic_new(BIO *bi) |
| { |
| EBCDIC_OUTBUFF *wbuf; |
| |
| wbuf = (EBCDIC_OUTBUFF *)OPENSSL_malloc(sizeof(EBCDIC_OUTBUFF) + 1024); |
| wbuf->alloced = 1024; |
| wbuf->buff[0] = '\0'; |
| |
| bi->ptr=(char *)wbuf; |
| bi->init=1; |
| bi->flags=0; |
| return(1); |
| } |
| |
| static int ebcdic_free(BIO *a) |
| { |
| if (a == NULL) return(0); |
| if (a->ptr != NULL) |
| OPENSSL_free(a->ptr); |
| a->ptr=NULL; |
| a->init=0; |
| a->flags=0; |
| return(1); |
| } |
| |
| static int ebcdic_read(BIO *b, char *out, int outl) |
| { |
| int ret=0; |
| |
| if (out == NULL || outl == 0) return(0); |
| if (b->next_bio == NULL) return(0); |
| |
| ret=BIO_read(b->next_bio,out,outl); |
| if (ret > 0) |
| ascii2ebcdic(out,out,ret); |
| return(ret); |
| } |
| |
| static int ebcdic_write(BIO *b, const char *in, int inl) |
| { |
| EBCDIC_OUTBUFF *wbuf; |
| int ret=0; |
| int num; |
| unsigned char n; |
| |
| if ((in == NULL) || (inl <= 0)) return(0); |
| if (b->next_bio == NULL) return(0); |
| |
| wbuf=(EBCDIC_OUTBUFF *)b->ptr; |
| |
| if (inl > (num = wbuf->alloced)) |
| { |
| num = num + num; /* double the size */ |
| if (num < inl) |
| num = inl; |
| OPENSSL_free(wbuf); |
| wbuf=(EBCDIC_OUTBUFF *)OPENSSL_malloc(sizeof(EBCDIC_OUTBUFF) + num); |
| |
| wbuf->alloced = num; |
| wbuf->buff[0] = '\0'; |
| |
| b->ptr=(char *)wbuf; |
| } |
| |
| ebcdic2ascii(wbuf->buff, in, inl); |
| |
| ret=BIO_write(b->next_bio, wbuf->buff, inl); |
| |
| return(ret); |
| } |
| |
| static long ebcdic_ctrl(BIO *b, int cmd, long num, void *ptr) |
| { |
| long ret; |
| |
| if (b->next_bio == NULL) return(0); |
| switch (cmd) |
| { |
| case BIO_CTRL_DUP: |
| ret=0L; |
| break; |
| default: |
| ret=BIO_ctrl(b->next_bio,cmd,num,ptr); |
| break; |
| } |
| return(ret); |
| } |
| |
| static int ebcdic_gets(BIO *bp, char *buf, int size) |
| { |
| int i, ret=0; |
| if (bp->next_bio == NULL) return(0); |
| /* return(BIO_gets(bp->next_bio,buf,size));*/ |
| for (i=0; i<size-1; ++i) |
| { |
| ret = ebcdic_read(bp,&buf[i],1); |
| if (ret <= 0) |
| break; |
| else if (buf[i] == '\n') |
| { |
| ++i; |
| break; |
| } |
| } |
| if (i < size) |
| buf[i] = '\0'; |
| return (ret < 0 && i == 0) ? ret : i; |
| } |
| |
| static int ebcdic_puts(BIO *bp, const char *str) |
| { |
| if (bp->next_bio == NULL) return(0); |
| return ebcdic_write(bp, str, strlen(str)); |
| } |
| #endif |
| |
| #ifndef OPENSSL_NO_TLSEXT |
| |
| /* This is a context that we pass to callbacks */ |
| typedef struct tlsextctx_st { |
| char * servername; |
| BIO * biodebug; |
| int extension_error; |
| } tlsextctx; |
| |
| |
| static int MS_CALLBACK ssl_servername_cb(SSL *s, int *ad, void *arg) |
| { |
| tlsextctx * p = (tlsextctx *) arg; |
| const char * servername = SSL_get_servername(s, TLSEXT_NAMETYPE_host_name); |
| if (servername && p->biodebug) |
| BIO_printf(p->biodebug,"Hostname in TLS extension: \"%s\"\n",servername); |
| |
| if (!p->servername) |
| return SSL_TLSEXT_ERR_NOACK; |
| |
| if (servername) |
| { |
| if (strcmp(servername,p->servername)) |
| return p->extension_error; |
| if (ctx2) |
| { |
| BIO_printf(p->biodebug,"Switching server context.\n"); |
| SSL_set_SSL_CTX(s,ctx2); |
| } |
| } |
| return SSL_TLSEXT_ERR_OK; |
| } |
| |
| /* Structure passed to cert status callback */ |
| |
| typedef struct tlsextstatusctx_st { |
| /* Default responder to use */ |
| char *host, *path, *port; |
| int use_ssl; |
| int timeout; |
| BIO *err; |
| int verbose; |
| } tlsextstatusctx; |
| |
| static tlsextstatusctx tlscstatp = {NULL, NULL, NULL, 0, -1, NULL, 0}; |
| |
| /* Certificate Status callback. This is called when a client includes a |
| * certificate status request extension. |
| * |
| * This is a simplified version. It examines certificates each time and |
| * makes one OCSP responder query for each request. |
| * |
| * A full version would store details such as the OCSP certificate IDs and |
| * minimise the number of OCSP responses by caching them until they were |
| * considered "expired". |
| */ |
| |
| static int cert_status_cb(SSL *s, void *arg) |
| { |
| tlsextstatusctx *srctx = arg; |
| BIO *err = srctx->err; |
| char *host, *port, *path; |
| int use_ssl; |
| unsigned char *rspder = NULL; |
| int rspderlen; |
| STACK_OF(OPENSSL_STRING) *aia = NULL; |
| X509 *x = NULL; |
| X509_STORE_CTX inctx; |
| X509_OBJECT obj; |
| OCSP_REQUEST *req = NULL; |
| OCSP_RESPONSE *resp = NULL; |
| OCSP_CERTID *id = NULL; |
| STACK_OF(X509_EXTENSION) *exts; |
| int ret = SSL_TLSEXT_ERR_NOACK; |
| int i; |
| #if 0 |
| STACK_OF(OCSP_RESPID) *ids; |
| SSL_get_tlsext_status_ids(s, &ids); |
| BIO_printf(err, "cert_status: received %d ids\n", sk_OCSP_RESPID_num(ids)); |
| #endif |
| if (srctx->verbose) |
| BIO_puts(err, "cert_status: callback called\n"); |
| /* Build up OCSP query from server certificate */ |
| x = SSL_get_certificate(s); |
| aia = X509_get1_ocsp(x); |
| if (aia) |
| { |
| if (!OCSP_parse_url(sk_OPENSSL_STRING_value(aia, 0), |
| &host, &port, &path, &use_ssl)) |
| { |
| BIO_puts(err, "cert_status: can't parse AIA URL\n"); |
| goto err; |
| } |
| if (srctx->verbose) |
| BIO_printf(err, "cert_status: AIA URL: %s\n", |
| sk_OPENSSL_STRING_value(aia, 0)); |
| } |
| else |
| { |
| if (!srctx->host) |
| { |
| BIO_puts(srctx->err, "cert_status: no AIA and no default responder URL\n"); |
| goto done; |
| } |
| host = srctx->host; |
| path = srctx->path; |
| port = srctx->port; |
| use_ssl = srctx->use_ssl; |
| } |
| |
| if (!X509_STORE_CTX_init(&inctx, |
| SSL_CTX_get_cert_store(SSL_get_SSL_CTX(s)), |
| NULL, NULL)) |
| goto err; |
| if (X509_STORE_get_by_subject(&inctx,X509_LU_X509, |
| X509_get_issuer_name(x),&obj) <= 0) |
| { |
| BIO_puts(err, "cert_status: Can't retrieve issuer certificate.\n"); |
| X509_STORE_CTX_cleanup(&inctx); |
| goto done; |
| } |
| req = OCSP_REQUEST_new(); |
| if (!req) |
| goto err; |
| id = OCSP_cert_to_id(NULL, x, obj.data.x509); |
| X509_free(obj.data.x509); |
| X509_STORE_CTX_cleanup(&inctx); |
| if (!id) |
| goto err; |
| if (!OCSP_request_add0_id(req, id)) |
| goto err; |
| id = NULL; |
| /* Add any extensions to the request */ |
| SSL_get_tlsext_status_exts(s, &exts); |
| for (i = 0; i < sk_X509_EXTENSION_num(exts); i++) |
| { |
| X509_EXTENSION *ext = sk_X509_EXTENSION_value(exts, i); |
| if (!OCSP_REQUEST_add_ext(req, ext, -1)) |
| goto err; |
| } |
| resp = process_responder(err, req, host, path, port, use_ssl, NULL, |
| srctx->timeout); |
| if (!resp) |
| { |
| BIO_puts(err, "cert_status: error querying responder\n"); |
| goto done; |
| } |
| rspderlen = i2d_OCSP_RESPONSE(resp, &rspder); |
| if (rspderlen <= 0) |
| goto err; |
| SSL_set_tlsext_status_ocsp_resp(s, rspder, rspderlen); |
| if (srctx->verbose) |
| { |
| BIO_puts(err, "cert_status: ocsp response sent:\n"); |
| OCSP_RESPONSE_print(err, resp, 2); |
| } |
| ret = SSL_TLSEXT_ERR_OK; |
| done: |
| if (ret != SSL_TLSEXT_ERR_OK) |
| ERR_print_errors(err); |
| if (aia) |
| { |
| OPENSSL_free(host); |
| OPENSSL_free(path); |
| OPENSSL_free(port); |
| X509_email_free(aia); |
| } |
| if (id) |
| OCSP_CERTID_free(id); |
| if (req) |
| OCSP_REQUEST_free(req); |
| if (resp) |
| OCSP_RESPONSE_free(resp); |
| return ret; |
| err: |
| ret = SSL_TLSEXT_ERR_ALERT_FATAL; |
| goto done; |
| } |
| #endif |
| |
| int MAIN(int, char **); |
| |
| #ifndef OPENSSL_NO_JPAKE |
| static char *jpake_secret = NULL; |
| #endif |
| |
| int MAIN(int argc, char *argv[]) |
| { |
| X509_VERIFY_PARAM *vpm = NULL; |
| int badarg = 0; |
| short port=PORT; |
| char *CApath=NULL,*CAfile=NULL; |
| unsigned char *context = NULL; |
| char *dhfile = NULL; |
| #ifndef OPENSSL_NO_ECDH |
| char *named_curve = NULL; |
| #endif |
| int badop=0,bugs=0; |
| int ret=1; |
| int off=0; |
| int no_tmp_rsa=0,no_dhe=0,no_ecdhe=0,nocert=0; |
| int state=0; |
| const SSL_METHOD *meth=NULL; |
| int socket_type=SOCK_STREAM; |
| ENGINE *e=NULL; |
| char *inrand=NULL; |
| int s_cert_format = FORMAT_PEM, s_key_format = FORMAT_PEM; |
| char *passarg = NULL, *pass = NULL; |
| char *dpassarg = NULL, *dpass = NULL; |
| int s_dcert_format = FORMAT_PEM, s_dkey_format = FORMAT_PEM; |
| X509 *s_cert = NULL, *s_dcert = NULL; |
| EVP_PKEY *s_key = NULL, *s_dkey = NULL; |
| int no_cache = 0; |
| #ifndef OPENSSL_NO_TLSEXT |
| EVP_PKEY *s_key2 = NULL; |
| X509 *s_cert2 = NULL; |
| #endif |
| #ifndef OPENSSL_NO_TLSEXT |
| tlsextctx tlsextcbp = {NULL, NULL, SSL_TLSEXT_ERR_ALERT_WARNING}; |
| #endif |
| #ifndef OPENSSL_NO_PSK |
| /* by default do not send a PSK identity hint */ |
| static char *psk_identity_hint=NULL; |
| #endif |
| #if !defined(OPENSSL_NO_SSL2) && !defined(OPENSSL_NO_SSL3) |
| meth=SSLv23_server_method(); |
| #elif !defined(OPENSSL_NO_SSL3) |
| meth=SSLv3_server_method(); |
| #elif !defined(OPENSSL_NO_SSL2) |
| meth=SSLv2_server_method(); |
| #endif |
| |
| local_argc=argc; |
| local_argv=argv; |
| |
| apps_startup(); |
| #ifdef MONOLITH |
| s_server_init(); |
| #endif |
| |
| if (bio_err == NULL) |
| bio_err=BIO_new_fp(stderr,BIO_NOCLOSE); |
| |
| if (!load_config(bio_err, NULL)) |
| goto end; |
| |
| verify_depth=0; |
| #ifdef FIONBIO |
| s_nbio=0; |
| #endif |
| s_nbio_test=0; |
| |
| argc--; |
| argv++; |
| |
| while (argc >= 1) |
| { |
| if ((strcmp(*argv,"-port") == 0) || |
| (strcmp(*argv,"-accept") == 0)) |
| { |
| if (--argc < 1) goto bad; |
| if (!extract_port(*(++argv),&port)) |
| goto bad; |
| } |
| else if (strcmp(*argv,"-verify") == 0) |
| { |
| s_server_verify=SSL_VERIFY_PEER|SSL_VERIFY_CLIENT_ONCE; |
| if (--argc < 1) goto bad; |
| verify_depth=atoi(*(++argv)); |
| BIO_printf(bio_err,"verify depth is %d\n",verify_depth); |
| } |
| else if (strcmp(*argv,"-Verify") == 0) |
| { |
| s_server_verify=SSL_VERIFY_PEER|SSL_VERIFY_FAIL_IF_NO_PEER_CERT| |
| SSL_VERIFY_CLIENT_ONCE; |
| if (--argc < 1) goto bad; |
| verify_depth=atoi(*(++argv)); |
| BIO_printf(bio_err,"verify depth is %d, must return a certificate\n",verify_depth); |
| } |
| else if (strcmp(*argv,"-context") == 0) |
| { |
| if (--argc < 1) goto bad; |
| context= (unsigned char *)*(++argv); |
| } |
| else if (strcmp(*argv,"-cert") == 0) |
| { |
| if (--argc < 1) goto bad; |
| s_cert_file= *(++argv); |
| } |
| else if (strcmp(*argv,"-certform") == 0) |
| { |
| if (--argc < 1) goto bad; |
| s_cert_format = str2fmt(*(++argv)); |
| } |
| else if (strcmp(*argv,"-key") == 0) |
| { |
| if (--argc < 1) goto bad; |
| s_key_file= *(++argv); |
| } |
| else if (strcmp(*argv,"-keyform") == 0) |
| { |
| if (--argc < 1) goto bad; |
| s_key_format = str2fmt(*(++argv)); |
| } |
| else if (strcmp(*argv,"-pass") == 0) |
| { |
| if (--argc < 1) goto bad; |
| passarg = *(++argv); |
| } |
| else if (strcmp(*argv,"-dhparam") == 0) |
| { |
| if (--argc < 1) goto bad; |
| dhfile = *(++argv); |
| } |
| #ifndef OPENSSL_NO_ECDH |
| else if (strcmp(*argv,"-named_curve") == 0) |
| { |
| if (--argc < 1) goto bad; |
| named_curve = *(++argv); |
| } |
| #endif |
| else if (strcmp(*argv,"-dcertform") == 0) |
| { |
| if (--argc < 1) goto bad; |
| s_dcert_format = str2fmt(*(++argv)); |
| } |
| else if (strcmp(*argv,"-dcert") == 0) |
| { |
| if (--argc < 1) goto bad; |
| s_dcert_file= *(++argv); |
| } |
| else if (strcmp(*argv,"-dkeyform") == 0) |
| { |
| if (--argc < 1) goto bad; |
| s_dkey_format = str2fmt(*(++argv)); |
| } |
| else if (strcmp(*argv,"-dpass") == 0) |
| { |
| if (--argc < 1) goto bad; |
| dpassarg = *(++argv); |
| } |
| else if (strcmp(*argv,"-dkey") == 0) |
| { |
| if (--argc < 1) goto bad; |
| s_dkey_file= *(++argv); |
| } |
| else if (strcmp(*argv,"-nocert") == 0) |
| { |
| nocert=1; |
| } |
| else if (strcmp(*argv,"-CApath") == 0) |
| { |
| if (--argc < 1) goto bad; |
| CApath= *(++argv); |
| } |
| else if (strcmp(*argv,"-no_cache") == 0) |
| no_cache = 1; |
| else if (args_verify(&argv, &argc, &badarg, bio_err, &vpm)) |
| { |
| if (badarg) |
| goto bad; |
| continue; |
| } |
| else if (strcmp(*argv,"-verify_return_error") == 0) |
| verify_return_error = 1; |
| else if (strcmp(*argv,"-serverpref") == 0) |
| { off|=SSL_OP_CIPHER_SERVER_PREFERENCE; } |
| else if (strcmp(*argv,"-legacy_renegotiation") == 0) |
| off|=SSL_OP_ALLOW_UNSAFE_LEGACY_RENEGOTIATION; |
| else if (strcmp(*argv,"-cipher") == 0) |
| { |
| if (--argc < 1) goto bad; |
| cipher= *(++argv); |
| } |
| else if (strcmp(*argv,"-CAfile") == 0) |
| { |
| if (--argc < 1) goto bad; |
| CAfile= *(++argv); |
| } |
| #ifdef FIONBIO |
| else if (strcmp(*argv,"-nbio") == 0) |
| { s_nbio=1; } |
| #endif |
| else if (strcmp(*argv,"-nbio_test") == 0) |
| { |
| #ifdef FIONBIO |
| s_nbio=1; |
| #endif |
| s_nbio_test=1; |
| } |
| else if (strcmp(*argv,"-debug") == 0) |
| { s_debug=1; } |
| #ifndef OPENSSL_NO_TLSEXT |
| else if (strcmp(*argv,"-tlsextdebug") == 0) |
| s_tlsextdebug=1; |
| else if (strcmp(*argv,"-status") == 0) |
| s_tlsextstatus=1; |
| else if (strcmp(*argv,"-status_verbose") == 0) |
| { |
| s_tlsextstatus=1; |
| tlscstatp.verbose = 1; |
| } |
| else if (!strcmp(*argv, "-status_timeout")) |
| { |
| s_tlsextstatus=1; |
| if (--argc < 1) goto bad; |
| tlscstatp.timeout = atoi(*(++argv)); |
| } |
| else if (!strcmp(*argv, "-status_url")) |
| { |
| s_tlsextstatus=1; |
| if (--argc < 1) goto bad; |
| if (!OCSP_parse_url(*(++argv), |
| &tlscstatp.host, |
| &tlscstatp.port, |
| &tlscstatp.path, |
| &tlscstatp.use_ssl)) |
| { |
| BIO_printf(bio_err, "Error parsing URL\n"); |
| goto bad; |
| } |
| } |
| #endif |
| else if (strcmp(*argv,"-msg") == 0) |
| { s_msg=1; } |
| else if (strcmp(*argv,"-hack") == 0) |
| { hack=1; } |
| else if (strcmp(*argv,"-state") == 0) |
| { state=1; } |
| else if (strcmp(*argv,"-crlf") == 0) |
| { s_crlf=1; } |
| else if (strcmp(*argv,"-quiet") == 0) |
| { s_quiet=1; } |
| else if (strcmp(*argv,"-bugs") == 0) |
| { bugs=1; } |
| else if (strcmp(*argv,"-no_tmp_rsa") == 0) |
| { no_tmp_rsa=1; } |
| else if (strcmp(*argv,"-no_dhe") == 0) |
| { no_dhe=1; } |
| else if (strcmp(*argv,"-no_ecdhe") == 0) |
| { no_ecdhe=1; } |
| #ifndef OPENSSL_NO_PSK |
| else if (strcmp(*argv,"-psk_hint") == 0) |
| { |
| if (--argc < 1) goto bad; |
| psk_identity_hint= *(++argv); |
| } |
| else if (strcmp(*argv,"-psk") == 0) |
| { |
| size_t i; |
| |
| if (--argc < 1) goto bad; |
| psk_key=*(++argv); |
| for (i=0; i<strlen(psk_key); i++) |
| { |
| if (isxdigit((int)psk_key[i])) |
| continue; |
| BIO_printf(bio_err,"Not a hex number '%s'\n",*argv); |
| goto bad; |
| } |
| } |
| #endif |
| else if (strcmp(*argv,"-www") == 0) |
| { www=1; } |
| else if (strcmp(*argv,"-WWW") == 0) |
| { www=2; } |
| else if (strcmp(*argv,"-HTTP") == 0) |
| { www=3; } |
| else if (strcmp(*argv,"-no_ssl2") == 0) |
| { off|=SSL_OP_NO_SSLv2; } |
| else if (strcmp(*argv,"-no_ssl3") == 0) |
| { off|=SSL_OP_NO_SSLv3; } |
| else if (strcmp(*argv,"-no_tls1") == 0) |
| { off|=SSL_OP_NO_TLSv1; } |
| else if (strcmp(*argv,"-no_comp") == 0) |
| { off|=SSL_OP_NO_COMPRESSION; } |
| #ifndef OPENSSL_NO_TLSEXT |
| else if (strcmp(*argv,"-no_ticket") == 0) |
| { off|=SSL_OP_NO_TICKET; } |
| #endif |
| #ifndef OPENSSL_NO_SSL2 |
| else if (strcmp(*argv,"-ssl2") == 0) |
| { meth=SSLv2_server_method(); } |
| #endif |
| #ifndef OPENSSL_NO_SSL3 |
| else if (strcmp(*argv,"-ssl3") == 0) |
| { meth=SSLv3_server_method(); } |
| #endif |
| #ifndef OPENSSL_NO_TLS1 |
| else if (strcmp(*argv,"-tls1") == 0) |
| { meth=TLSv1_server_method(); } |
| #endif |
| #ifndef OPENSSL_NO_DTLS1 |
| else if (strcmp(*argv,"-dtls1") == 0) |
| { |
| meth=DTLSv1_server_method(); |
| socket_type = SOCK_DGRAM; |
| } |
| else if (strcmp(*argv,"-timeout") == 0) |
| enable_timeouts = 1; |
| else if (strcmp(*argv,"-mtu") == 0) |
| { |
| if (--argc < 1) goto bad; |
| socket_mtu = atol(*(++argv)); |
| } |
| else if (strcmp(*argv, "-chain") == 0) |
| cert_chain = 1; |
| #endif |
| else if (strcmp(*argv, "-id_prefix") == 0) |
| { |
| if (--argc < 1) goto bad; |
| session_id_prefix = *(++argv); |
| } |
| #ifndef OPENSSL_NO_ENGINE |
| else if (strcmp(*argv,"-engine") == 0) |
| { |
| if (--argc < 1) goto bad; |
| engine_id= *(++argv); |
| } |
| #endif |
| else if (strcmp(*argv,"-rand") == 0) |
| { |
| if (--argc < 1) goto bad; |
| inrand= *(++argv); |
| } |
| #ifndef OPENSSL_NO_TLSEXT |
| else if (strcmp(*argv,"-servername") == 0) |
| { |
| if (--argc < 1) goto bad; |
| tlsextcbp.servername= *(++argv); |
| } |
| else if (strcmp(*argv,"-servername_fatal") == 0) |
| { tlsextcbp.extension_error = SSL_TLSEXT_ERR_ALERT_FATAL; } |
| else if (strcmp(*argv,"-cert2") == 0) |
| { |
| if (--argc < 1) goto bad; |
| s_cert_file2= *(++argv); |
| } |
| else if (strcmp(*argv,"-key2") == 0) |
| { |
| if (--argc < 1) goto bad; |
| s_key_file2= *(++argv); |
| } |
| |
| #endif |
| #if !defined(OPENSSL_NO_JPAKE) && !defined(OPENSSL_NO_PSK) |
| else if (strcmp(*argv,"-jpake") == 0) |
| { |
| if (--argc < 1) goto bad; |
| jpake_secret = *(++argv); |
| } |
| #endif |
| else |
| { |
| BIO_printf(bio_err,"unknown option %s\n",*argv); |
| badop=1; |
| break; |
| } |
| argc--; |
| argv++; |
| } |
| if (badop) |
| { |
| bad: |
| sv_usage(); |
| goto end; |
| } |
| |
| #if !defined(OPENSSL_NO_JPAKE) && !defined(OPENSSL_NO_PSK) |
| if (jpake_secret) |
| { |
| if (psk_key) |
| { |
| BIO_printf(bio_err, |
| "Can't use JPAKE and PSK together\n"); |
| goto end; |
| } |
| psk_identity = "JPAKE"; |
| if (cipher) |
| { |
| BIO_printf(bio_err, "JPAKE sets cipher to PSK\n"); |
| goto end; |
| } |
| cipher = "PSK"; |
| } |
| |
| #endif |
| |
| SSL_load_error_strings(); |
| OpenSSL_add_ssl_algorithms(); |
| |
| #ifndef OPENSSL_NO_ENGINE |
| e = setup_engine(bio_err, engine_id, 1); |
| #endif |
| |
| if (!app_passwd(bio_err, passarg, dpassarg, &pass, &dpass)) |
| { |
| BIO_printf(bio_err, "Error getting password\n"); |
| goto end; |
| } |
| |
| |
| if (s_key_file == NULL) |
| s_key_file = s_cert_file; |
| #ifndef OPENSSL_NO_TLSEXT |
| if (s_key_file2 == NULL) |
| s_key_file2 = s_cert_file2; |
| #endif |
| |
| if (nocert == 0) |
| { |
| s_key = load_key(bio_err, s_key_file, s_key_format, 0, pass, e, |
| "server certificate private key file"); |
| if (!s_key) |
| { |
| ERR_print_errors(bio_err); |
| goto end; |
| } |
| |
| s_cert = load_cert(bio_err,s_cert_file,s_cert_format, |
| NULL, e, "server certificate file"); |
| |
| if (!s_cert) |
| { |
| ERR_print_errors(bio_err); |
| goto end; |
| } |
| |
| #ifndef OPENSSL_NO_TLSEXT |
| if (tlsextcbp.servername) |
| { |
| s_key2 = load_key(bio_err, s_key_file2, s_key_format, 0, pass, e, |
| "second server certificate private key file"); |
| if (!s_key2) |
| { |
| ERR_print_errors(bio_err); |
| goto end; |
| } |
| |
| s_cert2 = load_cert(bio_err,s_cert_file2,s_cert_format, |
| NULL, e, "second server certificate file"); |
| |
| if (!s_cert2) |
| { |
| ERR_print_errors(bio_err); |
| goto end; |
| } |
| } |
| #endif |
| } |
| |
| |
| if (s_dcert_file) |
| { |
| |
| if (s_dkey_file == NULL) |
| s_dkey_file = s_dcert_file; |
| |
| s_dkey = load_key(bio_err, s_dkey_file, s_dkey_format, |
| 0, dpass, e, |
| "second certificate private key file"); |
| if (!s_dkey) |
| { |
| ERR_print_errors(bio_err); |
| goto end; |
| } |
| |
| s_dcert = load_cert(bio_err,s_dcert_file,s_dcert_format, |
| NULL, e, "second server certificate file"); |
| |
| if (!s_dcert) |
| { |
| ERR_print_errors(bio_err); |
| goto end; |
| } |
| |
| } |
| |
| if (!app_RAND_load_file(NULL, bio_err, 1) && inrand == NULL |
| && !RAND_status()) |
| { |
| BIO_printf(bio_err,"warning, not much extra random data, consider using the -rand option\n"); |
| } |
| if (inrand != NULL) |
| BIO_printf(bio_err,"%ld semi-random bytes loaded\n", |
| app_RAND_load_files(inrand)); |
| |
| if (bio_s_out == NULL) |
| { |
| if (s_quiet && !s_debug && !s_msg) |
| { |
| bio_s_out=BIO_new(BIO_s_null()); |
| } |
| else |
| { |
| if (bio_s_out == NULL) |
| bio_s_out=BIO_new_fp(stdout,BIO_NOCLOSE); |
| } |
| } |
| |
| #if !defined(OPENSSL_NO_RSA) || !defined(OPENSSL_NO_DSA) || !defined(OPENSSL_NO_ECDSA) |
| if (nocert) |
| #endif |
| { |
| s_cert_file=NULL; |
| s_key_file=NULL; |
| s_dcert_file=NULL; |
| s_dkey_file=NULL; |
| #ifndef OPENSSL_NO_TLSEXT |
| s_cert_file2=NULL; |
| s_key_file2=NULL; |
| #endif |
| } |
| |
| ctx=SSL_CTX_new(meth); |
| if (ctx == NULL) |
| { |
| ERR_print_errors(bio_err); |
| goto end; |
| } |
| if (session_id_prefix) |
| { |
| if(strlen(session_id_prefix) >= 32) |
| BIO_printf(bio_err, |
| "warning: id_prefix is too long, only one new session will be possible\n"); |
| else if(strlen(session_id_prefix) >= 16) |
| BIO_printf(bio_err, |
| "warning: id_prefix is too long if you use SSLv2\n"); |
| if(!SSL_CTX_set_generate_session_id(ctx, generate_session_id)) |
| { |
| BIO_printf(bio_err,"error setting 'id_prefix'\n"); |
| ERR_print_errors(bio_err); |
| goto end; |
| } |
| BIO_printf(bio_err,"id_prefix '%s' set.\n", session_id_prefix); |
| } |
| SSL_CTX_set_quiet_shutdown(ctx,1); |
| if (bugs) SSL_CTX_set_options(ctx,SSL_OP_ALL); |
| if (hack) SSL_CTX_set_options(ctx,SSL_OP_NETSCAPE_DEMO_CIPHER_CHANGE_BUG); |
| SSL_CTX_set_options(ctx,off); |
| /* DTLS: partial reads end up discarding unread UDP bytes :-( |
| * Setting read ahead solves this problem. |
| */ |
| if (socket_type == SOCK_DGRAM) SSL_CTX_set_read_ahead(ctx, 1); |
| |
| if (state) SSL_CTX_set_info_callback(ctx,apps_ssl_info_callback); |
| if (no_cache) |
| SSL_CTX_set_session_cache_mode(ctx, SSL_SESS_CACHE_OFF); |
| else |
| SSL_CTX_sess_set_cache_size(ctx,128); |
| |
| #if 0 |
| if (cipher == NULL) cipher=getenv("SSL_CIPHER"); |
| #endif |
| |
| #if 0 |
| if (s_cert_file == NULL) |
| { |
| BIO_printf(bio_err,"You must specify a certificate file for the server to use\n"); |
| goto end; |
| } |
| #endif |
| |
| if ((!SSL_CTX_load_verify_locations(ctx,CAfile,CApath)) || |
| (!SSL_CTX_set_default_verify_paths(ctx))) |
| { |
| /* BIO_printf(bio_err,"X509_load_verify_locations\n"); */ |
| ERR_print_errors(bio_err); |
| /* goto end; */ |
| } |
| if (vpm) |
| SSL_CTX_set1_param(ctx, vpm); |
| |
| #ifndef OPENSSL_NO_TLSEXT |
| if (s_cert2) |
| { |
| ctx2=SSL_CTX_new(meth); |
| if (ctx2 == NULL) |
| { |
| ERR_print_errors(bio_err); |
| goto end; |
| } |
| } |
| |
| if (ctx2) |
| { |
| BIO_printf(bio_s_out,"Setting secondary ctx parameters\n"); |
| |
| if (session_id_prefix) |
| { |
| if(strlen(session_id_prefix) >= 32) |
| BIO_printf(bio_err, |
| "warning: id_prefix is too long, only one new session will be possible\n"); |
| else if(strlen(session_id_prefix) >= 16) |
| BIO_printf(bio_err, |
| "warning: id_prefix is too long if you use SSLv2\n"); |
| if(!SSL_CTX_set_generate_session_id(ctx2, generate_session_id)) |
| { |
| BIO_printf(bio_err,"error setting 'id_prefix'\n"); |
| ERR_print_errors(bio_err); |
| goto end; |
| } |
| BIO_printf(bio_err,"id_prefix '%s' set.\n", session_id_prefix); |
| } |
| SSL_CTX_set_quiet_shutdown(ctx2,1); |
| if (bugs) SSL_CTX_set_options(ctx2,SSL_OP_ALL); |
| if (hack) SSL_CTX_set_options(ctx2,SSL_OP_NETSCAPE_DEMO_CIPHER_CHANGE_BUG); |
| SSL_CTX_set_options(ctx2,off); |
| /* DTLS: partial reads end up discarding unread UDP bytes :-( |
| * Setting read ahead solves this problem. |
| */ |
| if (socket_type == SOCK_DGRAM) SSL_CTX_set_read_ahead(ctx2, 1); |
| |
| if (state) SSL_CTX_set_info_callback(ctx2,apps_ssl_info_callback); |
| |
| if (no_cache) |
| SSL_CTX_set_session_cache_mode(ctx2,SSL_SESS_CACHE_OFF); |
| else |
| SSL_CTX_sess_set_cache_size(ctx2,128); |
| |
| if ((!SSL_CTX_load_verify_locations(ctx2,CAfile,CApath)) || |
| (!SSL_CTX_set_default_verify_paths(ctx2))) |
| { |
| ERR_print_errors(bio_err); |
| } |
| if (vpm) |
| SSL_CTX_set1_param(ctx2, vpm); |
| } |
| #endif |
| |
| #ifndef OPENSSL_NO_DH |
| if (!no_dhe) |
| { |
| DH *dh=NULL; |
| |
| if (dhfile) |
| dh = load_dh_param(dhfile); |
| else if (s_cert_file) |
| dh = load_dh_param(s_cert_file); |
| |
| if (dh != NULL) |
| { |
| BIO_printf(bio_s_out,"Setting temp DH parameters\n"); |
| } |
| else |
| { |
| BIO_printf(bio_s_out,"Using default temp DH parameters\n"); |
| dh=get_dh512(); |
| } |
| (void)BIO_flush(bio_s_out); |
| |
| SSL_CTX_set_tmp_dh(ctx,dh); |
| #ifndef OPENSSL_NO_TLSEXT |
| if (ctx2) |
| { |
| if (!dhfile) |
| { |
| DH *dh2=load_dh_param(s_cert_file2); |
| if (dh2 != NULL) |
| { |
| BIO_printf(bio_s_out,"Setting temp DH parameters\n"); |
| (void)BIO_flush(bio_s_out); |
| |
| DH_free(dh); |
| dh = dh2; |
| } |
| } |
| SSL_CTX_set_tmp_dh(ctx2,dh); |
| } |
| #endif |
| DH_free(dh); |
| } |
| #endif |
| |
| #ifndef OPENSSL_NO_ECDH |
| if (!no_ecdhe) |
| { |
| EC_KEY *ecdh=NULL; |
| |
| if (named_curve) |
| { |
| int nid = OBJ_sn2nid(named_curve); |
| |
| if (nid == 0) |
| { |
| BIO_printf(bio_err, "unknown curve name (%s)\n", |
| named_curve); |
| goto end; |
| } |
| ecdh = EC_KEY_new_by_curve_name(nid); |
| if (ecdh == NULL) |
| { |
| BIO_printf(bio_err, "unable to create curve (%s)\n", |
| named_curve); |
| goto end; |
| } |
| } |
| |
| if (ecdh != NULL) |
| { |
| BIO_printf(bio_s_out,"Setting temp ECDH parameters\n"); |
| } |
| else |
| { |
| BIO_printf(bio_s_out,"Using default temp ECDH parameters\n"); |
| ecdh = EC_KEY_new_by_curve_name(NID_X9_62_prime256v1); |
| if (ecdh == NULL) |
| { |
| BIO_printf(bio_err, "unable to create curve (nistp256)\n"); |
| goto end; |
| } |
| } |
| (void)BIO_flush(bio_s_out); |
| |
| SSL_CTX_set_tmp_ecdh(ctx,ecdh); |
| #ifndef OPENSSL_NO_TLSEXT |
| if (ctx2) |
| SSL_CTX_set_tmp_ecdh(ctx2,ecdh); |
| #endif |
| EC_KEY_free(ecdh); |
| } |
| #endif |
| |
| if (!set_cert_key_stuff(ctx,s_cert,s_key)) |
| goto end; |
| #ifndef OPENSSL_NO_TLSEXT |
| if (ctx2 && !set_cert_key_stuff(ctx2,s_cert2,s_key2)) |
| goto end; |
| #endif |
| if (s_dcert != NULL) |
| { |
| if (!set_cert_key_stuff(ctx,s_dcert,s_dkey)) |
| goto end; |
| } |
| |
| #ifndef OPENSSL_NO_RSA |
| #if 1 |
| if (!no_tmp_rsa) |
| { |
| SSL_CTX_set_tmp_rsa_callback(ctx,tmp_rsa_cb); |
| #ifndef OPENSSL_NO_TLSEXT |
| if (ctx2) |
| SSL_CTX_set_tmp_rsa_callback(ctx2,tmp_rsa_cb); |
| #endif |
| } |
| #else |
| if (!no_tmp_rsa && SSL_CTX_need_tmp_RSA(ctx)) |
| { |
| RSA *rsa; |
| |
| BIO_printf(bio_s_out,"Generating temp (512 bit) RSA key..."); |
| BIO_flush(bio_s_out); |
| |
| rsa=RSA_generate_key(512,RSA_F4,NULL); |
| |
| if (!SSL_CTX_set_tmp_rsa(ctx,rsa)) |
| { |
| ERR_print_errors(bio_err); |
| goto end; |
| } |
| #ifndef OPENSSL_NO_TLSEXT |
| if (ctx2) |
| { |
| if (!SSL_CTX_set_tmp_rsa(ctx2,rsa)) |
| { |
| ERR_print_errors(bio_err); |
| goto end; |
| } |
| } |
| #endif |
| RSA_free(rsa); |
| BIO_printf(bio_s_out,"\n"); |
| } |
| #endif |
| #endif |
| |
| #ifndef OPENSSL_NO_PSK |
| #ifdef OPENSSL_NO_JPAKE |
| if (psk_key != NULL) |
| #else |
| if (psk_key != NULL || jpake_secret) |
| #endif |
| { |
| if (s_debug) |
| BIO_printf(bio_s_out, "PSK key given or JPAKE in use, setting server callback\n"); |
| SSL_CTX_set_psk_server_callback(ctx, psk_server_cb); |
| } |
| |
| if (!SSL_CTX_use_psk_identity_hint(ctx, psk_identity_hint)) |
| { |
| BIO_printf(bio_err,"error setting PSK identity hint to context\n"); |
| ERR_print_errors(bio_err); |
| goto end; |
| } |
| #endif |
| |
| if (cipher != NULL) |
| { |
| if(!SSL_CTX_set_cipher_list(ctx,cipher)) |
| { |
| BIO_printf(bio_err,"error setting cipher list\n"); |
| ERR_print_errors(bio_err); |
| goto end; |
| } |
| #ifndef OPENSSL_NO_TLSEXT |
| if (ctx2 && !SSL_CTX_set_cipher_list(ctx2,cipher)) |
| { |
| BIO_printf(bio_err,"error setting cipher list\n"); |
| ERR_print_errors(bio_err); |
| goto end; |
| } |
| #endif |
| } |
| SSL_CTX_set_verify(ctx,s_server_verify,verify_callback); |
| SSL_CTX_set_session_id_context(ctx,(void*)&s_server_session_id_context, |
| sizeof s_server_session_id_context); |
| |
| /* Set DTLS cookie generation and verification callbacks */ |
| SSL_CTX_set_cookie_generate_cb(ctx, generate_cookie_callback); |
| SSL_CTX_set_cookie_verify_cb(ctx, verify_cookie_callback); |
| |
| #ifndef OPENSSL_NO_TLSEXT |
| if (ctx2) |
| { |
| SSL_CTX_set_verify(ctx2,s_server_verify,verify_callback); |
| SSL_CTX_set_session_id_context(ctx2,(void*)&s_server_session_id_context, |
| sizeof s_server_session_id_context); |
| |
| tlsextcbp.biodebug = bio_s_out; |
| SSL_CTX_set_tlsext_servername_callback(ctx2, ssl_servername_cb); |
| SSL_CTX_set_tlsext_servername_arg(ctx2, &tlsextcbp); |
| SSL_CTX_set_tlsext_servername_callback(ctx, ssl_servername_cb); |
| SSL_CTX_set_tlsext_servername_arg(ctx, &tlsextcbp); |
| } |
| #endif |
| |
| if (CAfile != NULL) |
| { |
| SSL_CTX_set_client_CA_list(ctx,SSL_load_client_CA_file(CAfile)); |
| #ifndef OPENSSL_NO_TLSEXT |
| if (ctx2) |
| SSL_CTX_set_client_CA_list(ctx2,SSL_load_client_CA_file(CAfile)); |
| #endif |
| } |
| |
| BIO_printf(bio_s_out,"ACCEPT\n"); |
| (void)BIO_flush(bio_s_out); |
| if (www) |
| do_server(port,socket_type,&accept_socket,www_body, context); |
| else |
| do_server(port,socket_type,&accept_socket,sv_body, context); |
| print_stats(bio_s_out,ctx); |
| ret=0; |
| end: |
| if (ctx != NULL) SSL_CTX_free(ctx); |
| if (s_cert) |
| X509_free(s_cert); |
| if (s_dcert) |
| X509_free(s_dcert); |
| if (s_key) |
| EVP_PKEY_free(s_key); |
| if (s_dkey) |
| EVP_PKEY_free(s_dkey); |
| if (pass) |
| OPENSSL_free(pass); |
| if (dpass) |
| OPENSSL_free(dpass); |
| #ifndef OPENSSL_NO_TLSEXT |
| if (ctx2 != NULL) SSL_CTX_free(ctx2); |
| if (s_cert2) |
| X509_free(s_cert2); |
| if (s_key2) |
| EVP_PKEY_free(s_key2); |
| #endif |
| if (bio_s_out != NULL) |
| { |
| BIO_free(bio_s_out); |
| bio_s_out=NULL; |
| } |
| apps_shutdown(); |
| OPENSSL_EXIT(ret); |
| } |
| |
| static void print_stats(BIO *bio, SSL_CTX *ssl_ctx) |
| { |
| BIO_printf(bio,"%4ld items in the session cache\n", |
| SSL_CTX_sess_number(ssl_ctx)); |
| BIO_printf(bio,"%4ld client connects (SSL_connect())\n", |
| SSL_CTX_sess_connect(ssl_ctx)); |
| BIO_printf(bio,"%4ld client renegotiates (SSL_connect())\n", |
| SSL_CTX_sess_connect_renegotiate(ssl_ctx)); |
| BIO_printf(bio,"%4ld client connects that finished\n", |
| SSL_CTX_sess_connect_good(ssl_ctx)); |
| BIO_printf(bio,"%4ld server accepts (SSL_accept())\n", |
| SSL_CTX_sess_accept(ssl_ctx)); |
| BIO_printf(bio,"%4ld server renegotiates (SSL_accept())\n", |
| SSL_CTX_sess_accept_renegotiate(ssl_ctx)); |
| BIO_printf(bio,"%4ld server accepts that finished\n", |
| SSL_CTX_sess_accept_good(ssl_ctx)); |
| BIO_printf(bio,"%4ld session cache hits\n",SSL_CTX_sess_hits(ssl_ctx)); |
| BIO_printf(bio,"%4ld session cache misses\n",SSL_CTX_sess_misses(ssl_ctx)); |
| BIO_printf(bio,"%4ld session cache timeouts\n",SSL_CTX_sess_timeouts(ssl_ctx)); |
| BIO_printf(bio,"%4ld callback cache hits\n",SSL_CTX_sess_cb_hits(ssl_ctx)); |
| BIO_printf(bio,"%4ld cache full overflows (%ld allowed)\n", |
| SSL_CTX_sess_cache_full(ssl_ctx), |
| SSL_CTX_sess_get_cache_size(ssl_ctx)); |
| } |
| |
| static int sv_body(char *hostname, int s, unsigned char *context) |
| { |
| char *buf=NULL; |
| fd_set readfds; |
| int ret=1,width; |
| int k,i; |
| unsigned long l; |
| SSL *con=NULL; |
| BIO *sbio; |
| struct timeval timeout; |
| #if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS) || defined(OPENSSL_SYS_NETWARE) || defined(OPENSSL_SYS_BEOS_R5) |
| struct timeval tv; |
| #else |
| struct timeval *timeoutp; |
| #endif |
| |
| if ((buf=OPENSSL_malloc(bufsize)) == NULL) |
| { |
| BIO_printf(bio_err,"out of memory\n"); |
| goto err; |
| } |
| #ifdef FIONBIO |
| if (s_nbio) |
| { |
| unsigned long sl=1; |
| |
| if (!s_quiet) |
| BIO_printf(bio_err,"turning on non blocking io\n"); |
| if (BIO_socket_ioctl(s,FIONBIO,&sl) < 0) |
| ERR_print_errors(bio_err); |
| } |
| #endif |
| |
| if (con == NULL) { |
| con=SSL_new(ctx); |
| #ifndef OPENSSL_NO_TLSEXT |
| if (s_tlsextdebug) |
| { |
| SSL_set_tlsext_debug_callback(con, tlsext_cb); |
| SSL_set_tlsext_debug_arg(con, bio_s_out); |
| } |
| if (s_tlsextstatus) |
| { |
| SSL_CTX_set_tlsext_status_cb(ctx, cert_status_cb); |
| tlscstatp.err = bio_err; |
| SSL_CTX_set_tlsext_status_arg(ctx, &tlscstatp); |
| } |
| #endif |
| #ifndef OPENSSL_NO_KRB5 |
| if ((con->kssl_ctx = kssl_ctx_new()) != NULL) |
| { |
| kssl_ctx_setstring(con->kssl_ctx, KSSL_SERVICE, |
| KRB5SVC); |
| kssl_ctx_setstring(con->kssl_ctx, KSSL_KEYTAB, |
| KRB5KEYTAB); |
| } |
| #endif /* OPENSSL_NO_KRB5 */ |
| if(context) |
| SSL_set_session_id_context(con, context, |
| strlen((char *)context)); |
| } |
| SSL_clear(con); |
| #if 0 |
| #ifdef TLSEXT_TYPE_opaque_prf_input |
| SSL_set_tlsext_opaque_prf_input(con, "Test server", 11); |
| #endif |
| #endif |
| |
| if (SSL_version(con) == DTLS1_VERSION) |
| { |
| |
| sbio=BIO_new_dgram(s,BIO_NOCLOSE); |
| |
| if (enable_timeouts) |
| { |
| timeout.tv_sec = 0; |
| timeout.tv_usec = DGRAM_RCV_TIMEOUT; |
| BIO_ctrl(sbio, BIO_CTRL_DGRAM_SET_RECV_TIMEOUT, 0, &timeout); |
| |
| timeout.tv_sec = 0; |
| timeout.tv_usec = DGRAM_SND_TIMEOUT; |
| BIO_ctrl(sbio, BIO_CTRL_DGRAM_SET_SEND_TIMEOUT, 0, &timeout); |
| } |
| |
| if (socket_mtu > 28) |
| { |
| SSL_set_options(con, SSL_OP_NO_QUERY_MTU); |
| SSL_set_mtu(con, socket_mtu - 28); |
| } |
| else |
| /* want to do MTU discovery */ |
| BIO_ctrl(sbio, BIO_CTRL_DGRAM_MTU_DISCOVER, 0, NULL); |
| |
| /* turn on cookie exchange */ |
| SSL_set_options(con, SSL_OP_COOKIE_EXCHANGE); |
| } |
| else |
| sbio=BIO_new_socket(s,BIO_NOCLOSE); |
| |
| if (s_nbio_test) |
| { |
| BIO *test; |
| |
| test=BIO_new(BIO_f_nbio_test()); |
| sbio=BIO_push(test,sbio); |
| } |
| #ifndef OPENSSL_NO_JPAKE |
| if(jpake_secret) |
| jpake_server_auth(bio_s_out, sbio, jpake_secret); |
| #endif |
| |
| SSL_set_bio(con,sbio,sbio); |
| SSL_set_accept_state(con); |
| /* SSL_set_fd(con,s); */ |
| |
| if (s_debug) |
| { |
| con->debug=1; |
| BIO_set_callback(SSL_get_rbio(con),bio_dump_callback); |
| BIO_set_callback_arg(SSL_get_rbio(con),(char *)bio_s_out); |
| } |
| if (s_msg) |
| { |
| SSL_set_msg_callback(con, msg_cb); |
| SSL_set_msg_callback_arg(con, bio_s_out); |
| } |
| #ifndef OPENSSL_NO_TLSEXT |
| if (s_tlsextdebug) |
| { |
| SSL_set_tlsext_debug_callback(con, tlsext_cb); |
| SSL_set_tlsext_debug_arg(con, bio_s_out); |
| } |
| #endif |
| |
| width=s+1; |
| for (;;) |
| { |
| int read_from_terminal; |
| int read_from_sslcon; |
| |
| read_from_terminal = 0; |
| read_from_sslcon = SSL_pending(con); |
| |
| if (!read_from_sslcon) |
| { |
| FD_ZERO(&readfds); |
| #if !defined(OPENSSL_SYS_WINDOWS) && !defined(OPENSSL_SYS_MSDOS) && !defined(OPENSSL_SYS_NETWARE) && !defined(OPENSSL_SYS_BEOS_R5) |
| openssl_fdset(fileno(stdin),&readfds); |
| #endif |
| openssl_fdset(s,&readfds); |
| /* Note: under VMS with SOCKETSHR the second parameter is |
| * currently of type (int *) whereas under other systems |
| * it is (void *) if you don't have a cast it will choke |
| * the compiler: if you do have a cast then you can either |
| * go for (int *) or (void *). |
| */ |
| #if defined(OPENSSL_SYS_WINDOWS) || defined(OPENSSL_SYS_MSDOS) || defined(OPENSSL_SYS_NETWARE) |
| /* Under DOS (non-djgpp) and Windows we can't select on stdin: only |
| * on sockets. As a workaround we timeout the select every |
| * second and check for any keypress. In a proper Windows |
| * application we wouldn't do this because it is inefficient. |
| */ |
| tv.tv_sec = 1; |
| tv.tv_usec = 0; |
| i=select(width,(void *)&readfds,NULL,NULL,&tv); |
| if((i < 0) || (!i && !_kbhit() ) )continue; |
| if(_kbhit()) |
| read_from_terminal = 1; |
| #elif defined(OPENSSL_SYS_BEOS_R5) |
| /* Under BeOS-R5 the situation is similar to DOS */ |
| tv.tv_sec = 1; |
| tv.tv_usec = 0; |
| (void)fcntl(fileno(stdin), F_SETFL, O_NONBLOCK); |
| i=select(width,(void *)&readfds,NULL,NULL,&tv); |
| if ((i < 0) || (!i && read(fileno(stdin), buf, 0) < 0)) |
| continue; |
| if (read(fileno(stdin), buf, 0) >= 0) |
| read_from_terminal = 1; |
| (void)fcntl(fileno(stdin), F_SETFL, 0); |
| #else |
| if ((SSL_version(con) == DTLS1_VERSION) && |
| DTLSv1_get_timeout(con, &timeout)) |
| timeoutp = &timeout; |
| else |
| timeoutp = NULL; |
| |
| i=select(width,(void *)&readfds,NULL,NULL,timeoutp); |
| |
| if ((SSL_version(con) == DTLS1_VERSION) && DTLSv1_handle_timeout(con) > 0) |
| { |
| BIO_printf(bio_err,"TIMEOUT occured\n"); |
| } |
| |
| if (i <= 0) continue; |
| if (FD_ISSET(fileno(stdin),&readfds)) |
| read_from_terminal = 1; |
| #endif |
| if (FD_ISSET(s,&readfds)) |
| read_from_sslcon = 1; |
| } |
| if (read_from_terminal) |
| { |
| if (s_crlf) |
| { |
| int j, lf_num; |
| |
| i=raw_read_stdin(buf, bufsize/2); |
| lf_num = 0; |
| /* both loops are skipped when i <= 0 */ |
| for (j = 0; j < i; j++) |
| if (buf[j] == '\n') |
| lf_num++; |
| for (j = i-1; j >= 0; j--) |
| { |
| buf[j+lf_num] = buf[j]; |
| if (buf[j] == '\n') |
| { |
| lf_num--; |
| i++; |
| buf[j+lf_num] = '\r'; |
| } |
| } |
| assert(lf_num == 0); |
| } |
| else |
| i=raw_read_stdin(buf,bufsize); |
| if (!s_quiet) |
| { |
| if ((i <= 0) || (buf[0] == 'Q')) |
| { |
| BIO_printf(bio_s_out,"DONE\n"); |
| SHUTDOWN(s); |
| close_accept_socket(); |
| ret= -11; |
| goto err; |
| } |
| if ((i <= 0) || (buf[0] == 'q')) |
| { |
| BIO_printf(bio_s_out,"DONE\n"); |
| if (SSL_version(con) != DTLS1_VERSION) |
| SHUTDOWN(s); |
| /* close_accept_socket(); |
| ret= -11;*/ |
| goto err; |
| } |
| |
| if ((buf[0] == 'r') && |
| ((buf[1] == '\n') || (buf[1] == '\r'))) |
| { |
| SSL_renegotiate(con); |
| i=SSL_do_handshake(con); |
| printf("SSL_do_handshake -> %d\n",i); |
| i=0; /*13; */ |
| continue; |
| /* strcpy(buf,"server side RE-NEGOTIATE\n"); */ |
| } |
| if ((buf[0] == 'R') && |
| ((buf[1] == '\n') || (buf[1] == '\r'))) |
| { |
| SSL_set_verify(con, |
| SSL_VERIFY_PEER|SSL_VERIFY_CLIENT_ONCE,NULL); |
| SSL_renegotiate(con); |
| i=SSL_do_handshake(con); |
| printf("SSL_do_handshake -> %d\n",i); |
| i=0; /* 13; */ |
| continue; |
| /* strcpy(buf,"server side RE-NEGOTIATE asking for client cert\n"); */ |
| } |
| if (buf[0] == 'P') |
| { |
| static const char *str="Lets print some clear text\n"; |
| BIO_write(SSL_get_wbio(con),str,strlen(str)); |
| } |
| if (buf[0] == 'S') |
| { |
| print_stats(bio_s_out,SSL_get_SSL_CTX(con)); |
| } |
| } |
| #ifdef CHARSET_EBCDIC |
| ebcdic2ascii(buf,buf,i); |
| #endif |
| l=k=0; |
| for (;;) |
| { |
| /* should do a select for the write */ |
| #ifdef RENEG |
| { static count=0; if (++count == 100) { count=0; SSL_renegotiate(con); } } |
| #endif |
| k=SSL_write(con,&(buf[l]),(unsigned int)i); |
| switch (SSL_get_error(con,k)) |
| { |
| case SSL_ERROR_NONE: |
| break; |
| case SSL_ERROR_WANT_WRITE: |
| case SSL_ERROR_WANT_READ: |
| case SSL_ERROR_WANT_X509_LOOKUP: |
| BIO_printf(bio_s_out,"Write BLOCK\n"); |
| break; |
| case SSL_ERROR_SYSCALL: |
| case SSL_ERROR_SSL: |
| BIO_printf(bio_s_out,"ERROR\n"); |
| ERR_print_errors(bio_err); |
| ret=1; |
| goto err; |
| /* break; */ |
| case SSL_ERROR_ZERO_RETURN: |
| BIO_printf(bio_s_out,"DONE\n"); |
| ret=1; |
| goto err; |
| } |
| l+=k; |
| i-=k; |
| if (i <= 0) break; |
| } |
| } |
| if (read_from_sslcon) |
| { |
| if (!SSL_is_init_finished(con)) |
| { |
| i=init_ssl_connection(con); |
| |
| if (i < 0) |
| { |
| ret=0; |
| goto err; |
| } |
| else if (i == 0) |
| { |
| ret=1; |
| goto err; |
| } |
| } |
| else |
| { |
| again: |
| i=SSL_read(con,(char *)buf,bufsize); |
| switch (SSL_get_error(con,i)) |
| { |
| case SSL_ERROR_NONE: |
| #ifdef CHARSET_EBCDIC |
| ascii2ebcdic(buf,buf,i); |
| #endif |
| raw_write_stdout(buf, |
| (unsigned int)i); |
| if (SSL_pending(con)) goto again; |
| break; |
| case SSL_ERROR_WANT_WRITE: |
| case SSL_ERROR_WANT_READ: |
| case SSL_ERROR_WANT_X509_LOOKUP: |
| BIO_printf(bio_s_out,"Read BLOCK\n"); |
| break; |
| case SSL_ERROR_SYSCALL: |
| case SSL_ERROR_SSL: |
| BIO_printf(bio_s_out,"ERROR\n"); |
| ERR_print_errors(bio_err); |
| ret=1; |
| goto err; |
| case SSL_ERROR_ZERO_RETURN: |
| BIO_printf(bio_s_out,"DONE\n"); |
| ret=1; |
| goto err; |
| } |
| } |
| } |
| } |
| err: |
| if (con != NULL) |
| { |
| BIO_printf(bio_s_out,"shutting down SSL\n"); |
| #if 1 |
| SSL_set_shutdown(con,SSL_SENT_SHUTDOWN|SSL_RECEIVED_SHUTDOWN); |
| #else |
| SSL_shutdown(con); |
| #endif |
| SSL_free(con); |
| } |
| BIO_printf(bio_s_out,"CONNECTION CLOSED\n"); |
| if (buf != NULL) |
| { |
| OPENSSL_cleanse(buf,bufsize); |
| OPENSSL_free(buf); |
| } |
| if (ret >= 0) |
| BIO_printf(bio_s_out,"ACCEPT\n"); |
| return(ret); |
| } |
| |
| static void close_accept_socket(void) |
| { |
| BIO_printf(bio_err,"shutdown accept socket\n"); |
| if (accept_socket >= 0) |
| { |
| SHUTDOWN2(accept_socket); |
| } |
| } |
| |
| static int init_ssl_connection(SSL *con) |
| { |
| int i; |
| const char *str; |
| X509 *peer; |
| long verify_error; |
| MS_STATIC char buf[BUFSIZ]; |
| |
| if ((i=SSL_accept(con)) <= 0) |
| { |
| if (BIO_sock_should_retry(i)) |
| { |
| BIO_printf(bio_s_out,"DELAY\n"); |
| return(1); |
| } |
| |
| BIO_printf(bio_err,"ERROR\n"); |
| verify_error=SSL_get_verify_result(con); |
| if (verify_error != X509_V_OK) |
| { |
| BIO_printf(bio_err,"verify error:%s\n", |
| X509_verify_cert_error_string(verify_error)); |
| } |
| else |
| ERR_print_errors(bio_err); |
| return(0); |
| } |
| |
| PEM_write_bio_SSL_SESSION(bio_s_out,SSL_get_session(con)); |
| |
| peer=SSL_get_peer_certificate(con); |
| if (peer != NULL) |
| { |
| BIO_printf(bio_s_out,"Client certificate\n"); |
| PEM_write_bio_X509(bio_s_out,peer); |
| X509_NAME_oneline(X509_get_subject_name(peer),buf,sizeof buf); |
| BIO_printf(bio_s_out,"subject=%s\n",buf); |
| X509_NAME_oneline(X509_get_issuer_name(peer),buf,sizeof buf); |
| BIO_printf(bio_s_out,"issuer=%s\n",buf); |
| X509_free(peer); |
| } |
| |
| if (SSL_get_shared_ciphers(con,buf,sizeof buf) != NULL) |
| BIO_printf(bio_s_out,"Shared ciphers:%s\n",buf); |
| str=SSL_CIPHER_get_name(SSL_get_current_cipher(con)); |
| BIO_printf(bio_s_out,"CIPHER is %s\n",(str != NULL)?str:"(NONE)"); |
| if (con->hit) BIO_printf(bio_s_out,"Reused session-id\n"); |
| if (SSL_ctrl(con,SSL_CTRL_GET_FLAGS,0,NULL) & |
| TLS1_FLAGS_TLS_PADDING_BUG) |
| BIO_printf(bio_s_out,"Peer has incorrect TLSv1 block padding\n"); |
| #ifndef OPENSSL_NO_KRB5 |
| if (con->kssl_ctx->client_princ != NULL) |
| { |
| BIO_printf(bio_s_out,"Kerberos peer principal is %s\n", |
| con->kssl_ctx->client_princ); |
| } |
| #endif /* OPENSSL_NO_KRB5 */ |
| BIO_printf(bio_s_out, "Secure Renegotiation IS%s supported\n", |
| SSL_get_secure_renegotiation_support(con) ? "" : " NOT"); |
| return(1); |
| } |
| |
| #ifndef OPENSSL_NO_DH |
| static DH *load_dh_param(const char *dhfile) |
| { |
| DH *ret=NULL; |
| BIO *bio; |
| |
| if ((bio=BIO_new_file(dhfile,"r")) == NULL) |
| goto err; |
| ret=PEM_read_bio_DHparams(bio,NULL,NULL,NULL); |
| err: |
| if (bio != NULL) BIO_free(bio); |
| return(ret); |
| } |
| #endif |
| |
| #if 0 |
| static int load_CA(SSL_CTX *ctx, char *file) |
| { |
| FILE *in; |
| X509 *x=NULL; |
| |
| if ((in=fopen(file,"r")) == NULL) |
| return(0); |
| |
| for (;;) |
| { |
| if (PEM_read_X509(in,&x,NULL) == NULL) |
| break; |
| SSL_CTX_add_client_CA(ctx,x); |
| } |
| if (x != NULL) X509_free(x); |
| fclose(in); |
| return(1); |
| } |
| #endif |
| |
| static int www_body(char *hostname, int s, unsigned char *context) |
| { |
| char *buf=NULL; |
| int ret=1; |
| int i,j,k,blank,dot; |
| SSL *con; |
| const SSL_CIPHER *c; |
| BIO *io,*ssl_bio,*sbio; |
| long total_bytes; |
| |
| buf=OPENSSL_malloc(bufsize); |
| if (buf == NULL) return(0); |
| io=BIO_new(BIO_f_buffer()); |
| ssl_bio=BIO_new(BIO_f_ssl()); |
| if ((io == NULL) || (ssl_bio == NULL)) goto err; |
| |
| #ifdef FIONBIO |
| if (s_nbio) |
| { |
| unsigned long sl=1; |
| |
| if (!s_quiet) |
| BIO_printf(bio_err,"turning on non blocking io\n"); |
| if (BIO_socket_ioctl(s,FIONBIO,&sl) < 0) |
| ERR_print_errors(bio_err); |
| } |
| #endif |
| |
| /* lets make the output buffer a reasonable size */ |
| if (!BIO_set_write_buffer_size(io,bufsize)) goto err; |
| |
| if ((con=SSL_new(ctx)) == NULL) goto err; |
| #ifndef OPENSSL_NO_TLSEXT |
| if (s_tlsextdebug) |
| { |
| SSL_set_tlsext_debug_callback(con, tlsext_cb); |
| SSL_set_tlsext_debug_arg(con, bio_s_out); |
| } |
| #endif |
| #ifndef OPENSSL_NO_KRB5 |
| if ((con->kssl_ctx = kssl_ctx_new()) != NULL) |
| { |
| kssl_ctx_setstring(con->kssl_ctx, KSSL_SERVICE, KRB5SVC); |
| kssl_ctx_setstring(con->kssl_ctx, KSSL_KEYTAB, KRB5KEYTAB); |
| } |
| #endif /* OPENSSL_NO_KRB5 */ |
| if(context) SSL_set_session_id_context(con, context, |
| strlen((char *)context)); |
| |
| sbio=BIO_new_socket(s,BIO_NOCLOSE); |
| if (s_nbio_test) |
| { |
| BIO *test; |
| |
| test=BIO_new(BIO_f_nbio_test()); |
| sbio=BIO_push(test,sbio); |
| } |
| SSL_set_bio(con,sbio,sbio); |
| SSL_set_accept_state(con); |
| |
| /* SSL_set_fd(con,s); */ |
| BIO_set_ssl(ssl_bio,con,BIO_CLOSE); |
| BIO_push(io,ssl_bio); |
| #ifdef CHARSET_EBCDIC |
| io = BIO_push(BIO_new(BIO_f_ebcdic_filter()),io); |
| #endif |
| |
| if (s_debug) |
| { |
| con->debug=1; |
| BIO_set_callback(SSL_get_rbio(con),bio_dump_callback); |
| BIO_set_callback_arg(SSL_get_rbio(con),(char *)bio_s_out); |
| } |
| if (s_msg) |
| { |
| SSL_set_msg_callback(con, msg_cb); |
| SSL_set_msg_callback_arg(con, bio_s_out); |
| } |
| |
| blank=0; |
| for (;;) |
| { |
| if (hack) |
| { |
| i=SSL_accept(con); |
| |
| switch (SSL_get_error(con,i)) |
| { |
| case SSL_ERROR_NONE: |
| break; |
| case SSL_ERROR_WANT_WRITE: |
| case SSL_ERROR_WANT_READ: |
| case SSL_ERROR_WANT_X509_LOOKUP: |
| continue; |
| case SSL_ERROR_SYSCALL: |
| case SSL_ERROR_SSL: |
| case SSL_ERROR_ZERO_RETURN: |
| ret=1; |
| goto err; |
| /* break; */ |
| } |
| |
| SSL_renegotiate(con); |
| SSL_write(con,NULL,0); |
| } |
| |
| i=BIO_gets(io,buf,bufsize-1); |
| if (i < 0) /* error */ |
| { |
| if (!BIO_should_retry(io)) |
| { |
| if (!s_quiet) |
| ERR_print_errors(bio_err); |
| goto err; |
| } |
| else |
| { |
| BIO_printf(bio_s_out,"read R BLOCK\n"); |
| #if defined(OPENSSL_SYS_NETWARE) |
| delay(1000); |
| #elif !defined(OPENSSL_SYS_MSDOS) && !defined(__DJGPP__) |
| sleep(1); |
| #endif |
| continue; |
| } |
| } |
| else if (i == 0) /* end of input */ |
| { |
| ret=1; |
| goto end; |
| } |
| |
| /* else we have data */ |
| if ( ((www == 1) && (strncmp("GET ",buf,4) == 0)) || |
| ((www == 2) && (strncmp("GET /stats ",buf,10) == 0))) |
| { |
| char *p; |
| X509 *peer; |
| STACK_OF(SSL_CIPHER) *sk; |
| static const char *space=" "; |
| |
| BIO_puts(io,"HTTP/1.0 200 ok\r\nContent-type: text/html\r\n\r\n"); |
| BIO_puts(io,"<HTML><BODY BGCOLOR=\"#ffffff\">\n"); |
| BIO_puts(io,"<pre>\n"); |
| /* BIO_puts(io,SSLeay_version(SSLEAY_VERSION));*/ |
| BIO_puts(io,"\n"); |
| for (i=0; i<local_argc; i++) |
| { |
| BIO_puts(io,local_argv[i]); |
| BIO_write(io," ",1); |
| } |
| BIO_puts(io,"\n"); |
| |
| /* The following is evil and should not really |
| * be done */ |
| BIO_printf(io,"Ciphers supported in s_server binary\n"); |
| sk=SSL_get_ciphers(con); |
| j=sk_SSL_CIPHER_num(sk); |
| for (i=0; i<j; i++) |
| { |
| c=sk_SSL_CIPHER_value(sk,i); |
| BIO_printf(io,"%-11s:%-25s", |
| SSL_CIPHER_get_version(c), |
| SSL_CIPHER_get_name(c)); |
| if ((((i+1)%2) == 0) && (i+1 != j)) |
| BIO_puts(io,"\n"); |
| } |
| BIO_puts(io,"\n"); |
| p=SSL_get_shared_ciphers(con,buf,bufsize); |
| if (p != NULL) |
| { |
| BIO_printf(io,"---\nCiphers common between both SSL end points:\n"); |
| j=i=0; |
| while (*p) |
| { |
| if (*p == ':') |
| { |
| BIO_write(io,space,26-j); |
| i++; |
| j=0; |
| BIO_write(io,((i%3)?" ":"\n"),1); |
| } |
| else |
| { |
| BIO_write(io,p,1); |
| j++; |
| } |
| p++; |
| } |
| BIO_puts(io,"\n"); |
| } |
| BIO_printf(io,((con->hit) |
| ?"---\nReused, " |
| :"---\nNew, ")); |
| c=SSL_get_current_cipher(con); |
| BIO_printf(io,"%s, Cipher is %s\n", |
| SSL_CIPHER_get_version(c), |
| SSL_CIPHER_get_name(c)); |
| SSL_SESSION_print(io,SSL_get_session(con)); |
| BIO_printf(io,"---\n"); |
| print_stats(io,SSL_get_SSL_CTX(con)); |
| BIO_printf(io,"---\n"); |
| peer=SSL_get_peer_certificate(con); |
| if (peer != NULL) |
| { |
| BIO_printf(io,"Client certificate\n"); |
| X509_print(io,peer); |
| PEM_write_bio_X509(io,peer); |
| } |
| else |
| BIO_puts(io,"no client certificate available\n"); |
| BIO_puts(io,"</BODY></HTML>\r\n\r\n"); |
| break; |
| } |
| else if ((www == 2 || www == 3) |
| && (strncmp("GET /",buf,5) == 0)) |
| { |
| BIO *file; |
| char *p,*e; |
| static const char *text="HTTP/1.0 200 ok\r\nContent-type: text/plain\r\n\r\n"; |
| |
| /* skip the '/' */ |
| p= &(buf[5]); |
| |
| dot = 1; |
| for (e=p; *e != '\0'; e++) |
| { |
| if (e[0] == ' ') |
| break; |
| |
| switch (dot) |
| { |
| case 1: |
| dot = (e[0] == '.') ? 2 : 0; |
| break; |
| case 2: |
| dot = (e[0] == '.') ? 3 : 0; |
| break; |
| case 3: |
| dot = (e[0] == '/') ? -1 : 0; |
| break; |
| } |
| if (dot == 0) |
| dot = (e[0] == '/') ? 1 : 0; |
| } |
| dot = (dot == 3) || (dot == -1); /* filename contains ".." component */ |
| |
| if (*e == '\0') |
| { |
| BIO_puts(io,text); |
| BIO_printf(io,"'%s' is an invalid file name\r\n",p); |
| break; |
| } |
| *e='\0'; |
| |
| if (dot) |
| { |
| BIO_puts(io,text); |
| BIO_printf(io,"'%s' contains '..' reference\r\n",p); |
| break; |
| } |
| |
| if (*p == '/') |
| { |
| BIO_puts(io,text); |
| BIO_printf(io,"'%s' is an invalid path\r\n",p); |
| break; |
| } |
| |
| #if 0 |
| /* append if a directory lookup */ |
| if (e[-1] == '/') |
| strcat(p,"index.html"); |
| #endif |
| |
| /* if a directory, do the index thang */ |
| if (app_isdir(p)>0) |
| { |
| #if 0 /* must check buffer size */ |
| strcat(p,"/index.html"); |
| #else |
| BIO_puts(io,text); |
| BIO_printf(io,"'%s' is a directory\r\n",p); |
| break; |
| #endif |
| } |
| |
| if ((file=BIO_new_file(p,"r")) == NULL) |
| { |
| BIO_puts(io,text); |
| BIO_printf(io,"Error opening '%s'\r\n",p); |
| ERR_print_errors(io); |
| break; |
| } |
| |
| if (!s_quiet) |
| BIO_printf(bio_err,"FILE:%s\n",p); |
| |
| if (www == 2) |
| { |
| i=strlen(p); |
| if ( ((i > 5) && (strcmp(&(p[i-5]),".html") == 0)) || |
| ((i > 4) && (strcmp(&(p[i-4]),".php") == 0)) || |
| ((i > 4) && (strcmp(&(p[i-4]),".htm") == 0))) |
| BIO_puts(io,"HTTP/1.0 200 ok\r\nContent-type: text/html\r\n\r\n"); |
| else |
| BIO_puts(io,"HTTP/1.0 200 ok\r\nContent-type: text/plain\r\n\r\n"); |
| } |
| /* send the file */ |
| total_bytes=0; |
| for (;;) |
| { |
| i=BIO_read(file,buf,bufsize); |
| if (i <= 0) break; |
| |
| #ifdef RENEG |
| total_bytes+=i; |
| fprintf(stderr,"%d\n",i); |
| if (total_bytes > 3*1024) |
| { |
| total_bytes=0; |
| fprintf(stderr,"RENEGOTIATE\n"); |
| SSL_renegotiate(con); |
| } |
| #endif |
| |
| for (j=0; j<i; ) |
| { |
| #ifdef RENEG |
| { static count=0; if (++count == 13) { SSL_renegotiate(con); } } |
| #endif |
| k=BIO_write(io,&(buf[j]),i-j); |
| if (k <= 0) |
| { |
| if (!BIO_should_retry(io)) |
| goto write_error; |
| else |
| { |
| BIO_printf(bio_s_out,"rwrite W BLOCK\n"); |
| } |
| } |
| else |
| { |
| j+=k; |
| } |
| } |
| } |
| write_error: |
| BIO_free(file); |
| break; |
| } |
| } |
| |
| for (;;) |
| { |
| i=(int)BIO_flush(io); |
| if (i <= 0) |
| { |
| if (!BIO_should_retry(io)) |
| break; |
| } |
| else |
| break; |
| } |
| end: |
| #if 1 |
| /* make sure we re-use sessions */ |
| SSL_set_shutdown(con,SSL_SENT_SHUTDOWN|SSL_RECEIVED_SHUTDOWN); |
| #else |
| /* This kills performance */ |
| /* SSL_shutdown(con); A shutdown gets sent in the |
| * BIO_free_all(io) procession */ |
| #endif |
| |
| err: |
| |
| if (ret >= 0) |
| BIO_printf(bio_s_out,"ACCEPT\n"); |
| |
| if (buf != NULL) OPENSSL_free(buf); |
| if (io != NULL) BIO_free_all(io); |
| /* if (ssl_bio != NULL) BIO_free(ssl_bio);*/ |
| return(ret); |
| } |
| |
| #ifndef OPENSSL_NO_RSA |
| static RSA MS_CALLBACK *tmp_rsa_cb(SSL *s, int is_export, int keylength) |
| { |
| BIGNUM *bn = NULL; |
| static RSA *rsa_tmp=NULL; |
| |
| if (!rsa_tmp && ((bn = BN_new()) == NULL)) |
| BIO_printf(bio_err,"Allocation error in generating RSA key\n"); |
| if (!rsa_tmp && bn) |
| { |
| if (!s_quiet) |
| { |
| BIO_printf(bio_err,"Generating temp (%d bit) RSA key...",keylength); |
| (void)BIO_flush(bio_err); |
| } |
| if(!BN_set_word(bn, RSA_F4) || ((rsa_tmp = RSA_new()) == NULL) || |
| !RSA_generate_key_ex(rsa_tmp, keylength, bn, NULL)) |
| { |
| if(rsa_tmp) RSA_free(rsa_tmp); |
| rsa_tmp = NULL; |
| } |
| if (!s_quiet) |
| { |
| BIO_printf(bio_err,"\n"); |
| (void)BIO_flush(bio_err); |
| } |
| BN_free(bn); |
| } |
| return(rsa_tmp); |
| } |
| #endif |
| |
| #define MAX_SESSION_ID_ATTEMPTS 10 |
| static int generate_session_id(const SSL *ssl, unsigned char *id, |
| unsigned int *id_len) |
| { |
| unsigned int count = 0; |
| do { |
| RAND_pseudo_bytes(id, *id_len); |
| /* Prefix the session_id with the required prefix. NB: If our |
| * prefix is too long, clip it - but there will be worse effects |
| * anyway, eg. the server could only possibly create 1 session |
| * ID (ie. the prefix!) so all future session negotiations will |
| * fail due to conflicts. */ |
| memcpy(id, session_id_prefix, |
| (strlen(session_id_prefix) < *id_len) ? |
| strlen(session_id_prefix) : *id_len); |
| } |
| while(SSL_has_matching_session_id(ssl, id, *id_len) && |
| (++count < MAX_SESSION_ID_ATTEMPTS)); |
| if(count >= MAX_SESSION_ID_ATTEMPTS) |
| return 0; |
| return 1; |
| } |