| /* Copyright 2007, Google Inc. */ |
| |
| #include <debug.h> |
| #include <dev/gpio.h> |
| #include <kernel/thread.h> |
| #include <platform/mddi.h> |
| |
| #define MDDI_CLIENT_CORE_BASE 0x108000 |
| #define LCD_CONTROL_BLOCK_BASE 0x110000 |
| #define SPI_BLOCK_BASE 0x120000 |
| #define I2C_BLOCK_BASE 0x130000 |
| #define PWM_BLOCK_BASE 0x140000 |
| #define GPIO_BLOCK_BASE 0x150000 |
| #define SYSTEM_BLOCK1_BASE 0x160000 |
| #define SYSTEM_BLOCK2_BASE 0x170000 |
| |
| |
| #define MDDICAP0 (MDDI_CLIENT_CORE_BASE|0x00) |
| #define MDDICAP1 (MDDI_CLIENT_CORE_BASE|0x04) |
| #define MDDICAP2 (MDDI_CLIENT_CORE_BASE|0x08) |
| #define MDDICAP3 (MDDI_CLIENT_CORE_BASE|0x0C) |
| #define MDCAPCHG (MDDI_CLIENT_CORE_BASE|0x10) |
| #define MDCRCERC (MDDI_CLIENT_CORE_BASE|0x14) |
| #define TTBUSSEL (MDDI_CLIENT_CORE_BASE|0x18) |
| #define DPSET0 (MDDI_CLIENT_CORE_BASE|0x1C) |
| #define DPSET1 (MDDI_CLIENT_CORE_BASE|0x20) |
| #define DPSUS (MDDI_CLIENT_CORE_BASE|0x24) |
| #define DPRUN (MDDI_CLIENT_CORE_BASE|0x28) |
| #define SYSCKENA (MDDI_CLIENT_CORE_BASE|0x2C) |
| #define TESTMODE (MDDI_CLIENT_CORE_BASE|0x30) |
| #define FIFOMONI (MDDI_CLIENT_CORE_BASE|0x34) |
| #define INTMONI (MDDI_CLIENT_CORE_BASE|0x38) |
| #define MDIOBIST (MDDI_CLIENT_CORE_BASE|0x3C) |
| #define MDIOPSET (MDDI_CLIENT_CORE_BASE|0x40) |
| #define BITMAP0 (MDDI_CLIENT_CORE_BASE|0x44) |
| #define BITMAP1 (MDDI_CLIENT_CORE_BASE|0x48) |
| #define BITMAP2 (MDDI_CLIENT_CORE_BASE|0x4C) |
| #define BITMAP3 (MDDI_CLIENT_CORE_BASE|0x50) |
| #define BITMAP4 (MDDI_CLIENT_CORE_BASE|0x54) |
| |
| |
| #define SRST (LCD_CONTROL_BLOCK_BASE|0x00) |
| #define PORT_ENB (LCD_CONTROL_BLOCK_BASE|0x04) |
| #define START (LCD_CONTROL_BLOCK_BASE|0x08) |
| #define PORT (LCD_CONTROL_BLOCK_BASE|0x0C) |
| #define CMN (LCD_CONTROL_BLOCK_BASE|0x10) |
| #define GAMMA (LCD_CONTROL_BLOCK_BASE|0x14) |
| #define INTFLG (LCD_CONTROL_BLOCK_BASE|0x18) |
| #define INTMSK (LCD_CONTROL_BLOCK_BASE|0x1C) |
| #define MPLFBUF (LCD_CONTROL_BLOCK_BASE|0x20) |
| #define HDE_LEFT (LCD_CONTROL_BLOCK_BASE|0x24) |
| #define VDE_TOP (LCD_CONTROL_BLOCK_BASE|0x28) |
| |
| #define PXL (LCD_CONTROL_BLOCK_BASE|0x30) |
| #define HCYCLE (LCD_CONTROL_BLOCK_BASE|0x34) |
| #define HSW (LCD_CONTROL_BLOCK_BASE|0x38) |
| #define HDE_START (LCD_CONTROL_BLOCK_BASE|0x3C) |
| #define HDE_SIZE (LCD_CONTROL_BLOCK_BASE|0x40) |
| #define VCYCLE (LCD_CONTROL_BLOCK_BASE|0x44) |
| #define VSW (LCD_CONTROL_BLOCK_BASE|0x48) |
| #define VDE_START (LCD_CONTROL_BLOCK_BASE|0x4C) |
| #define VDE_SIZE (LCD_CONTROL_BLOCK_BASE|0x50) |
| #define WAKEUP (LCD_CONTROL_BLOCK_BASE|0x54) |
| #define WSYN_DLY (LCD_CONTROL_BLOCK_BASE|0x58) |
| #define REGENB (LCD_CONTROL_BLOCK_BASE|0x5C) |
| #define VSYNIF (LCD_CONTROL_BLOCK_BASE|0x60) |
| #define WRSTB (LCD_CONTROL_BLOCK_BASE|0x64) |
| #define RDSTB (LCD_CONTROL_BLOCK_BASE|0x68) |
| #define ASY_DATA (LCD_CONTROL_BLOCK_BASE|0x6C) |
| #define ASY_DATB (LCD_CONTROL_BLOCK_BASE|0x70) |
| #define ASY_DATC (LCD_CONTROL_BLOCK_BASE|0x74) |
| #define ASY_DATD (LCD_CONTROL_BLOCK_BASE|0x78) |
| #define ASY_DATE (LCD_CONTROL_BLOCK_BASE|0x7C) |
| #define ASY_DATF (LCD_CONTROL_BLOCK_BASE|0x80) |
| #define ASY_DATG (LCD_CONTROL_BLOCK_BASE|0x84) |
| #define ASY_DATH (LCD_CONTROL_BLOCK_BASE|0x88) |
| #define ASY_CMDSET (LCD_CONTROL_BLOCK_BASE|0x8C) |
| |
| #define MONI (LCD_CONTROL_BLOCK_BASE|0xB0) |
| |
| #define Current (LCD_CONTROL_BLOCK_BASE|0xC0) |
| #define LCD (LCD_CONTROL_BLOCK_BASE|0xC4) |
| #define COMMAND (LCD_CONTROL_BLOCK_BASE|0xC8) |
| |
| |
| #define SSICTL (SPI_BLOCK_BASE|0x00) |
| #define SSITIME (SPI_BLOCK_BASE|0x04) |
| #define SSITX (SPI_BLOCK_BASE|0x08) |
| #define SSIRX (SPI_BLOCK_BASE|0x0C) |
| #define SSIINTC (SPI_BLOCK_BASE|0x10) |
| #define SSIINTS (SPI_BLOCK_BASE|0x14) |
| #define SSIDBG1 (SPI_BLOCK_BASE|0x18) |
| #define SSIDBG2 (SPI_BLOCK_BASE|0x1C) |
| #define SSIID (SPI_BLOCK_BASE|0x20) |
| |
| |
| #define I2CSETUP (I2C_BLOCK_BASE|0x00) |
| #define I2CCTRL (I2C_BLOCK_BASE|0x04) |
| |
| |
| #define TIMER0LOAD (PWM_BLOCK_BASE|0x00) |
| #define TIMER0VALUE (PWM_BLOCK_BASE|0x04) |
| #define TIMER0CONTROL (PWM_BLOCK_BASE|0x08) |
| #define TIMER0INTCLR (PWM_BLOCK_BASE|0x0C) |
| #define TIMER0RIS (PWM_BLOCK_BASE|0x10) |
| #define TIMER0MIS (PWM_BLOCK_BASE|0x14) |
| #define TIMER0BGLOAD (PWM_BLOCK_BASE|0x18) |
| #define PWM0OFF (PWM_BLOCK_BASE|0x1C) |
| #define TIMER1LOAD (PWM_BLOCK_BASE|0x20) |
| #define TIMER1VALUE (PWM_BLOCK_BASE|0x24) |
| #define TIMER1CONTROL (PWM_BLOCK_BASE|0x28) |
| #define TIMER1INTCLR (PWM_BLOCK_BASE|0x2C) |
| #define TIMER1RIS (PWM_BLOCK_BASE|0x30) |
| #define TIMER1MIS (PWM_BLOCK_BASE|0x34) |
| #define TIMER1BGLOAD (PWM_BLOCK_BASE|0x38) |
| #define PWM1OFF (PWM_BLOCK_BASE|0x3C) |
| #define TIMERITCR (PWM_BLOCK_BASE|0x60) |
| #define TIMERITOP (PWM_BLOCK_BASE|0x64) |
| #define PWMCR (PWM_BLOCK_BASE|0x68) |
| #define PWMID (PWM_BLOCK_BASE|0x6C) |
| #define PWMMON (PWM_BLOCK_BASE|0x70) |
| |
| |
| #define GPIODATA (GPIO_BLOCK_BASE|0x00) |
| #define GPIODIR (GPIO_BLOCK_BASE|0x04) |
| #define GPIOIS (GPIO_BLOCK_BASE|0x08) |
| #define GPIOIBE (GPIO_BLOCK_BASE|0x0C) |
| #define GPIOIEV (GPIO_BLOCK_BASE|0x10) |
| #define GPIOIE (GPIO_BLOCK_BASE|0x14) |
| #define GPIORIS (GPIO_BLOCK_BASE|0x18) |
| #define GPIOMIS (GPIO_BLOCK_BASE|0x1C) |
| #define GPIOIC (GPIO_BLOCK_BASE|0x20) |
| #define GPIOOMS (GPIO_BLOCK_BASE|0x24) |
| #define GPIOPC (GPIO_BLOCK_BASE|0x28) |
| |
| #define GPIOID (GPIO_BLOCK_BASE|0x30) |
| |
| |
| #define WKREQ (SYSTEM_BLOCK1_BASE|0x00) |
| #define CLKENB (SYSTEM_BLOCK1_BASE|0x04) |
| #define DRAMPWR (SYSTEM_BLOCK1_BASE|0x08) |
| #define INTMASK (SYSTEM_BLOCK1_BASE|0x0C) |
| #define GPIOSEL (SYSTEM_BLOCK2_BASE|0x00) |
| |
| struct init_table { |
| unsigned int reg; |
| unsigned int val; |
| }; |
| |
| static struct init_table toshiba_480x640_init_table[] = { |
| { DPSET0, 0x4BEC0066 }, // # MDC.DPSET0 # Setup DPLL parameters |
| { DPSET1, 0x00000113 }, // # MDC.DPSET1 |
| { DPSUS, 0x00000000 }, // # MDC.DPSUS # Set DPLL oscillation enable |
| { DPRUN, 0x00000001 }, // # MDC.DPRUN # Release reset signal for DPLL |
| { 0, 14 }, // wait_ms(14); |
| { SYSCKENA, 0x00000001 }, // # MDC.SYSCKENA # Enable system clock output |
| { CLKENB, 0x000000EF }, // # SYS.CLKENB # Enable clocks for each module (without DCLK , i2cCLK) |
| { GPIO_BLOCK_BASE, 0x03FF0000 }, // # GPI .GPIODATA # GPIO2(RESET_LCD_N) set to 0 , GPIO3(eDRAM_Power) set to 0 |
| { GPIODIR, 0x0000024D }, // # GPI .GPIODIR # Select direction of GPIO port (0,2,3,6,9 output) |
| { SYSTEM_BLOCK2_BASE, 0x00000173 }, // # SYS.GPIOSEL # GPIO port multiplexing control |
| { GPIOPC, 0x03C300C0 }, // # GPI .GPIOPC # GPIO2,3 PD cut |
| { SYSTEM_BLOCK1_BASE, 0x00000000 }, // # SYS.WKREQ # Wake-up request event is VSYNC alignment |
| { GPIOIS, 0x00000000 }, // # GPI .GPIOIS # Set interrupt sense of GPIO |
| { GPIOIEV, 0x00000001 }, // # GPI .GPIOIEV # Set interrupt event of GPIO |
| { GPIOIC, 0x000003FF }, // # GPI .GPIOIC # GPIO interrupt clear |
| { GPIO_BLOCK_BASE, 0x00060006 }, // # GPI .GPIODATA # Release LCDD reset |
| { GPIO_BLOCK_BASE, 0x00080008 }, // # GPI .GPIODATA # eDRAM VD supply |
| { GPIO_BLOCK_BASE, 0x02000200 }, // # GPI .GPIODATA # TEST LED ON |
| { DRAMPWR, 0x00000001 }, // # SYS.DRAMPWR # eDRAM power up |
| { TIMER0CONTROL, 0x00000060 }, // # PWM.Timer0Control # PWM0 output stop |
| { PWM_BLOCK_BASE, 0x00001388 }, // # PWM.Timer0Load # PWM0 10kHz , Duty 99 (BackLight OFF) |
| //{PWM0OFF, 0x00000001 }, // # PWM.PWM0OFF |
| #if 0 |
| { PWM0OFF, 0x00001387 }, // SURF 100% backlight |
| { PWM0OFF, 0x00000000 }, // FFA 100% backlight |
| #endif |
| { PWM0OFF, 0x000009C3 }, // 50% BL |
| { TIMER1CONTROL, 0x00000060 }, // # PWM.Timer1Control # PWM1 output stop |
| { TIMER1LOAD, 0x00001388 }, // # PWM.Timer1Load # PWM1 10kHz , Duty 99 (BackLight OFF) |
| //{PWM1OFF, 0x00000001 }, // # PWM.PWM1OFF |
| { PWM1OFF, 0x00001387 }, |
| { TIMER0CONTROL, 0x000000E0 }, // # PWM.Timer0Control # PWM0 output start |
| { TIMER1CONTROL, 0x000000E0 }, // # PWM.Timer1Control # PWM1 output start |
| { PWMCR, 0x00000003 }, // # PWM.PWMCR # PWM output enable |
| { 0, 1 }, // wait_ms(1); |
| { SPI_BLOCK_BASE, 0x00000799 }, // # SPI .SSICTL # SPI operation mode setting |
| { SSITIME, 0x00000100 }, // # SPI .SSITIME # SPI serial interface timing setting |
| { SPI_BLOCK_BASE, 0x0000079b }, // # SPI .SSICTL # Set SPI active mode |
| |
| { SSITX, 0x00000000 }, // # SPI.SSITX # Release from Deep Stanby mode |
| { 0, 1 }, // wait_ms(1); |
| { SSITX, 0x00000000 }, // # SPI.SSITX |
| { 0, 1 }, // wait_ms(1); |
| { SSITX, 0x00000000 }, // # SPI.SSITX |
| { 0, 1 }, // wait_ms(1); |
| { SSITX, 0x000800BA }, // # SPI.SSITX *NOTE 1 # Command setting of SPI block |
| { SSITX, 0x00000111 }, // # Display mode setup(1) : Normaly Black |
| { SSITX, 0x00080036 }, // # Command setting of SPI block |
| { SSITX, 0x00000100 }, // # Memory access control |
| { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty |
| { SSITX, 0x000800BB }, // # Command setting of SPI block |
| { SSITX, 0x00000100 }, // # Display mode setup(2) |
| { SSITX, 0x0008003A }, // # Command setting of SPI block |
| { SSITX, 0x00000160 }, // # RGB Interface data format |
| { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty |
| { SSITX, 0x000800BF }, // # Command setting of SPI block |
| { SSITX, 0x00000100 }, // # Drivnig method |
| { SSITX, 0x000800B1 }, // # Command setting of SPI block |
| { SSITX, 0x0000015D }, // # Booster operation setup |
| { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty |
| { SSITX, 0x000800B2 }, // # Command setting of SPI block |
| { SSITX, 0x00000133 }, // # Booster mode setup |
| { SSITX, 0x000800B3 }, // # Command setting of SPI block |
| { SSITX, 0x00000122 }, // # Booster frequencies setup |
| { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty |
| { SSITX, 0x000800B4 }, // # Command setting of SPI block |
| { SSITX, 0x00000102 }, // # OP-amp capability/System clock freq. division setup |
| { SSITX, 0x000800B5 }, // # Command setting of SPI block |
| { SSITX, 0x0000011F }, // # VCS Voltage adjustment (1C->1F for Rev 2) |
| { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty |
| { SSITX, 0x000800B6 }, // # Command setting of SPI block |
| { SSITX, 0x00000128 }, // # VCOM Voltage adjustment |
| { SSITX, 0x000800B7 }, // # Command setting of SPI block |
| { SSITX, 0x00000103 }, // # Configure an external display signal |
| { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty |
| { SSITX, 0x000800B9 }, // # Command setting of SPI block |
| { SSITX, 0x00000120 }, // # DCCK/DCEV timing setup |
| { SSITX, 0x000800BD }, // # Command setting of SPI block |
| { SSITX, 0x00000102 }, // # ASW signal control |
| { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty |
| { SSITX, 0x000800BE }, // # Command setting of SPI block |
| { SSITX, 0x00000100 }, // # Dummy display (white/black) count setup for QUAD Data operation |
| { SSITX, 0x000800C0 }, // # Command setting of SPI block |
| { SSITX, 0x00000111 }, // # wait_ms(-out FR count setup (A) |
| { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty |
| { SSITX, 0x000800C1 }, // # Command setting of SPI block |
| { SSITX, 0x00000111 }, // # wait_ms(-out FR count setup (B) |
| { SSITX, 0x000800C2 }, // # Command setting of SPI block |
| { SSITX, 0x00000111 }, // # wait_ms(-out FR count setup (C) |
| { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty |
| { SSITX, 0x000800C3 }, // # Command setting of SPI block |
| { SSITX, 0x0008010A }, // # wait_ms(-in line clock count setup (D) |
| { SSITX, 0x0000010A }, // |
| { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty |
| { SSITX, 0x000800C4 }, // # Command setting of SPI block |
| { SSITX, 0x00080160 }, // # Seep-in line clock count setup (E) |
| { SSITX, 0x00000160 }, // |
| { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty |
| { SSITX, 0x000800C5 }, // # Command setting of SPI block |
| { SSITX, 0x00080160 }, // # wait_ms(-in line clock count setup (F) |
| { SSITX, 0x00000160 }, // |
| { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty |
| { SSITX, 0x000800C6 }, // # Command setting of SPI block |
| { SSITX, 0x00080160 }, // # wait_ms(-in line clock setup (G) |
| { SSITX, 0x00000160 }, // |
| { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty |
| { SSITX, 0x000800C7 }, // # Command setting of SPI block |
| { SSITX, 0x00080133 }, // # Gamma 1 fine tuning (1) |
| { SSITX, 0x00000143 }, // |
| { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty |
| { SSITX, 0x000800C8 }, // # Command setting of SPI block |
| { SSITX, 0x00000144 }, // # Gamma 1 fine tuning (2) |
| { SSITX, 0x000800C9 }, // # Command setting of SPI block |
| { SSITX, 0x00000133 }, // # Gamma 1 inclination adjustment |
| { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty |
| { SSITX, 0x000800CA }, // # Command setting of SPI block |
| { SSITX, 0x00000100 }, // # Gamma 1 blue offset adjustment |
| { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty |
| { SSITX, 0x000800EC }, // # Command setting of SPI block |
| { SSITX, 0x00080102 }, // # Total number of horizontal clock cycles (1) [PCLK Sync. VGA setting] |
| { SSITX, 0x00000118 }, // |
| { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty |
| { SSITX, 0x000800CF }, // # Command setting of SPI block |
| { SSITX, 0x00000101 }, // # Blanking period control (1) [PCLK Sync. Table1 for VGA] |
| { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty |
| { SSITX, 0x000800D0 }, // # Command setting of SPI block |
| { SSITX, 0x00080110 }, // # Blanking period control (2) [PCLK Sync. Table1 for VGA] |
| { SSITX, 0x00000104 }, // |
| { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty |
| { SSITX, 0x000800D1 }, // # Command setting of SPI block |
| { SSITX, 0x00000101 }, // # CKV timing control on/off [PCLK Sync. Table1 for VGA] |
| { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty |
| { SSITX, 0x000800D2 }, // # Command setting of SPI block |
| { SSITX, 0x00080100 }, // # CKV1,2 timing control [PCLK Sync. Table1 for VGA] |
| { SSITX, 0x0000013A }, // |
| { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty |
| { SSITX, 0x000800D3 }, // # Command setting of SPI block |
| { SSITX, 0x00080100 }, // # OEV timing control [PCLK Sync. Table1 for VGA] |
| { SSITX, 0x0000013A }, // |
| { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty |
| { SSITX, 0x000800D4 }, // # Command setting of SPI block |
| { SSITX, 0x00080124 }, // # ASW timing control (1) [PCLK Sync. Table1 for VGA] |
| { SSITX, 0x0000016E }, // |
| { 0, 1 }, // wait_ms(1); // # Wait SPI fifo empty |
| { SSITX, 0x000800D5 }, // # Command setting of SPI block |
| { SSITX, 0x00000124 }, // # ASW timing control (2) [PCLK Sync. Table1 for VGA] |
| { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty |
| { SSITX, 0x000800ED }, // # Command setting of SPI block |
| { SSITX, 0x00080101 }, // # Total number of horizontal clock cycles (2) [PCLK Sync. Table1 for QVGA ] |
| { SSITX, 0x0000010A }, // |
| { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty |
| { SSITX, 0x000800D6 }, // # Command setting of SPI block |
| { SSITX, 0x00000101 }, // # Blanking period control (1) [PCLK Sync. Table2 for QVGA] |
| { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty |
| { SSITX, 0x000800D7 }, // # Command setting of SPI block |
| { SSITX, 0x00080110 }, // # Blanking period control (2) [PCLK Sync. Table2 for QVGA] |
| { SSITX, 0x0000010A }, // |
| { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty |
| { SSITX, 0x000800D8 }, // # Command setting of SPI block |
| { SSITX, 0x00000101 }, // # CKV timing control on/off [PCLK Sync. Table2 for QVGA] |
| { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty |
| { SSITX, 0x000800D9 }, // # Command setting of SPI block |
| { SSITX, 0x00080100 }, // # CKV1,2 timing control [PCLK Sync. Table2 for QVGA] |
| { SSITX, 0x00000114 }, // |
| { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty |
| { SSITX, 0x000800DE }, // # Command setting of SPI block |
| { SSITX, 0x00080100 }, // # OEV timing control [PCLK Sync. Table2 for QVGA] |
| { SSITX, 0x00000114 }, // |
| { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty |
| { SSITX, 0x000800DF }, // # Command setting of SPI block |
| { SSITX, 0x00080112 }, // # ASW timing control (1) [PCLK Sync. Table2 for QVGA] |
| { SSITX, 0x0000013F }, // |
| { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty |
| { SSITX, 0x000800E0 }, // # Command setting of SPI block |
| { SSITX, 0x0000010B }, // # ASW timing control (2) [PCLK Sync. Table2 for QVGA] |
| { SSITX, 0x000800E2 }, // # Command setting of SPI block |
| { SSITX, 0x00000101 }, // # Built-in oscillator frequency division setup [Frequency division ratio : 2 (60Hq) |
| { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty |
| { SSITX, 0x000800E3 }, // # Command setting of SPI block |
| { SSITX, 0x00000136 }, // # Built-in oscillator clock count setup |
| { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty |
| { SSITX, 0x000800E4 }, // # Command setting of SPI block |
| { SSITX, 0x00080100 }, // # CKV timing control for using build-in osc |
| { SSITX, 0x00000103 }, // |
| { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty |
| { SSITX, 0x000800E5 }, // # Command setting of SPI block |
| { SSITX, 0x00080102 }, // # OEV timing control for using build-in osc |
| { SSITX, 0x00000104 }, // |
| { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty |
| { SSITX, 0x000800E6 }, // # Command setting of SPI block |
| { SSITX, 0x00000103 }, // # DCEV timing control for using build-in osc |
| { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty |
| { SSITX, 0x000800E7 }, // # Command setting of SPI block |
| { SSITX, 0x00080104 }, // # ASW timing setup for using build-in osc(1) |
| { SSITX, 0x0000010A }, // |
| { 0, 2 }, // wait_ms(2); // # Wait SPI fifo empty |
| { SSITX, 0x000800E8 }, // # Command setting of SPI block |
| { SSITX, 0x00000104 }, // # ASW timing setup for using build-in osc(2) |
| |
| |
| { CLKENB, 0x000001EF }, // # SYS.CLKENB # DCLK enable |
| { START, 0x00000000 }, // # LCD.START # LCDC wait_ms( mode |
| { WRSTB, 0x0000003F }, // # LCD.WRSTB # write_client_reg( strobe |
| { RDSTB, 0x00000432 }, // # LCD.RDSTB # Read strobe |
| { PORT_ENB, 0x00000002 }, // # LCD.PORT_ENB # Asynchronous port enable |
| { VSYNIF, 0x00000000 }, // # LCD.VSYNCIF # VSYNC I/F mode set |
| { ASY_DATA, 0x80000000 }, // # LCD.ASY_DATx # Index setting of SUB LCDD |
| { ASY_DATB, 0x00000001 }, // # Oscillator start |
| { ASY_CMDSET, 0x00000005 }, // # LCD.ASY_CMDSET # Direct command transfer enable |
| { ASY_CMDSET, 0x00000004 }, // # LCD.ASY_CMDSET # Direct command transfer disable |
| { 0, 10 }, // wait_ms(10); |
| { ASY_DATA, 0x80000000 }, // # LCD.ASY_DATx # DUMMY write_client_reg(@*NOTE2 |
| { ASY_DATB, 0x80000000 }, // |
| { ASY_DATC, 0x80000000 }, // |
| { ASY_DATD, 0x80000000 }, // |
| { ASY_CMDSET, 0x00000009 }, // # LCD.ASY_CMDSET |
| { ASY_CMDSET, 0x00000008 }, // # LCD.ASY_CMDSET |
| { ASY_DATA, 0x80000007 }, // # LCD.ASY_DATx # Index setting of SUB LCDD |
| { ASY_DATB, 0x00004005 }, // # LCD driver control |
| { ASY_CMDSET, 0x00000005 }, // # LCD.ASY_CMDSET # Direct command transfer enable |
| { ASY_CMDSET, 0x00000004 }, // # LCD.ASY_CMDSET # Direct command transfer disable |
| { 0, 20 }, // wait_ms(20); |
| { ASY_DATA, 0x80000059 }, // # LCD.ASY_DATx # Index setting of SUB LCDD |
| { ASY_DATB, 0x00000000 }, // # LTPS I/F control |
| { ASY_CMDSET, 0x00000005 }, // # LCD.ASY_CMDSET # Direct command transfer enable |
| { ASY_CMDSET, 0x00000004 }, // # LCD.ASY_CMDSET # Direct command transfer disable |
| |
| { VSYNIF, 0x00000001 }, // # LCD.VSYNCIF # VSYNC I/F mode OFF |
| { PORT_ENB, 0x00000001 }, // # LCD.PORT_ENB # SYNC I/F output select |
| |
| /******************************/ |
| |
| { VSYNIF, 0x00000001 }, // VSYNC I/F mode OFF |
| { PORT_ENB, 0x00000001 }, // SYNC I/F mode ON |
| |
| { BITMAP1, 0x01E000F0 }, // MDC.BITMAP2 ); // Setup of PITCH size to Frame buffer1 |
| { BITMAP2, 0x01E000F0 }, // MDC.BITMAP3 ); // Setup of PITCH size to Frame buffer2 |
| { BITMAP3, 0x01E000F0 }, // MDC.BITMAP4 ); // Setup of PITCH size to Frame buffer3 |
| { BITMAP4, 0x00DC00B0 }, // MDC.BITMAP5 ); // Setup of PITCH size to Frame buffer4 |
| { CLKENB, 0x000001EF }, // SYS.CLKENB ); // DCLK supply |
| { PORT_ENB, 0x00000001 }, // LCD.PORT_ENB ); // Synchronous port enable |
| { PORT, 0x00000004 }, // LCD.PORT ); // Polarity of DE is set to high active |
| { PXL, 0x00000002 }, // LCD.PXL ); // ACTMODE 2 set (1st frame black data output) |
| { MPLFBUF, 0x00000000 }, // LCD.MPLFBUF ); // Select the reading buffer |
| { HCYCLE, 0x0000010b }, // LCD.HCYCLE ); // Setup to VGA size |
| { HSW, 0x00000003 }, // LCD.HSW |
| { HDE_START, 0x00000007 }, // LCD.HDE_START |
| { HDE_SIZE, 0x000000EF }, // LCD.HDE_SIZE |
| { VCYCLE, 0x00000285 }, // LCD.VCYCLE |
| { VSW, 0x00000001 }, // LCD.VSW |
| { VDE_START, 0x00000003 }, // LCD.VDE_START |
| { VDE_SIZE, 0x0000027F }, // LCD.VDE_SIZE |
| |
| { START, 0x00000001 }, // LCD.START ); // LCDC - Pixel data transfer start |
| |
| { 0, 10 }, // wait_ms( 10 ); |
| { SSITX, 0x000800BC }, // SPI.SSITX ); // Command setting of SPI block |
| { SSITX, 0x00000180 }, // Display data setup |
| { SSITX, 0x0008003B }, // Command setting of SPI block |
| { SSITX, 0x00000100 }, // Quad Data configuration - VGA |
| { 0, 1 }, // wait_ms( 1 ); // Wait SPI fifo empty |
| { SSITX, 0x000800B0 }, // Command setting of SPI block |
| { SSITX, 0x00000116 }, // Power supply ON/OFF control |
| { 0, 1 }, // wait_ms( 1 ); // Wait SPI fifo empty |
| { SSITX, 0x000800B8 }, // Command setting of SPI block |
| { SSITX, 0x000801FF }, // Output control |
| { SSITX, 0x000001F5 }, |
| { 0, 1 }, // wait_ms( 1); // Wait SPI fifo empty |
| { SSITX, 0x00000011 }, // wait_ms(-out (Command only) |
| { SSITX, 0x00000029 }, // Display on (Command only) |
| |
| { SYSTEM_BLOCK1_BASE, 0x00000002 }, // # wakeREQ -> GPIO |
| |
| { 0, 0 } |
| }; |
| |
| static void _panel_init(struct init_table *init_table) |
| { |
| unsigned n; |
| |
| dprintf(INFO, "panel_init()\n"); |
| |
| n = 0; |
| while (init_table[n].reg != 0 || init_table[n].val != 0) { |
| if (init_table[n].reg != 0) |
| mddi_remote_write(init_table[n].val, init_table[n].reg); |
| else |
| thread_sleep(init_table[n].val);//mdelay(init_table[n].val); |
| n++; |
| } |
| |
| dprintf(INFO, "panel_init() done\n"); |
| } |
| |
| void panel_init(struct mddi_client_caps *client_caps) |
| { |
| switch(client_caps->manufacturer_name) { |
| case 0xd263: // Toshiba |
| dprintf(INFO, "Found Toshiba panel\n"); |
| _panel_init(toshiba_480x640_init_table); |
| break; |
| case 0x4474: //?? |
| if (client_caps->product_code == 0xc065) |
| dprintf(INFO, "Found WVGA panel\n"); |
| break; |
| } |
| } |
| |
| void panel_poweron(void) |
| { |
| gpio_set(88, 0); |
| gpio_config(88, GPIO_OUTPUT); |
| thread_sleep(1); //udelay(10); |
| gpio_set(88, 1); |
| thread_sleep(10); //mdelay(10); |
| |
| //mdelay(1000); // uncomment for second stage boot |
| } |
| |
| void panel_backlight(int on) |
| {} |