| /* |
| * Copyright (c) 2001-2004 Swedish Institute of Computer Science. |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without modification, |
| * are permitted provided that the following conditions are met: |
| * |
| * 1. Redistributions of source code must retain the above copyright notice, |
| * this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright notice, |
| * this list of conditions and the following disclaimer in the documentation |
| * and/or other materials provided with the distribution. |
| * 3. The name of the author may not be used to endorse or promote products |
| * derived from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED |
| * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF |
| * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT |
| * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, |
| * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT |
| * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
| * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING |
| * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY |
| * OF SUCH DAMAGE. |
| * |
| * This file is part of the lwIP TCP/IP stack. |
| * |
| * Author: Adam Dunkels <adam@sics.se> |
| * |
| */ |
| |
| /* |
| * This file is a skeleton for developing Ethernet network interface |
| * drivers for lwIP. Add code to the low_level functions and do a |
| * search-and-replace for the word "ethernetif" to replace it with |
| * something that better describes your network interface. |
| */ |
| |
| #include "lwip/opt.h" |
| #include "lwip/def.h" |
| #include "lwip/mem.h" |
| #include "lwip/pbuf.h" |
| #include "lwip/sys.h" |
| #include <lwip/stats.h> |
| |
| #include "netif/etharp.h" |
| |
| /* Define those to better describe your network interface. */ |
| #define IFNAME0 'e' |
| #define IFNAME1 'n' |
| |
| struct ethernetif { |
| struct eth_addr *ethaddr; |
| /* Add whatever per-interface state that is needed here. */ |
| }; |
| |
| static const struct eth_addr ethbroadcast = {{0xff,0xff,0xff,0xff,0xff,0xff}}; |
| |
| /* Forward declarations. */ |
| static void ethernetif_input(struct netif *netif); |
| static err_t ethernetif_output(struct netif *netif, struct pbuf *p, |
| struct ip_addr *ipaddr); |
| |
| static void |
| low_level_init(struct netif *netif) |
| { |
| struct ethernetif *ethernetif = netif->state; |
| |
| /* set MAC hardware address length */ |
| netif->hwaddr_len = 6; |
| |
| /* set MAC hardware address */ |
| netif->hwaddr[0] = ; |
| ... |
| netif->hwaddr[5] = ; |
| |
| /* maximum transfer unit */ |
| netif->mtu = 1500; |
| |
| /* broadcast capability */ |
| netif->flags = NETIF_FLAG_BROADCAST; |
| |
| /* Do whatever else is needed to initialize interface. */ |
| } |
| |
| /* |
| * low_level_output(): |
| * |
| * Should do the actual transmission of the packet. The packet is |
| * contained in the pbuf that is passed to the function. This pbuf |
| * might be chained. |
| * |
| */ |
| |
| static err_t |
| low_level_output(struct netif *netif, struct pbuf *p) |
| { |
| struct ethernetif *ethernetif = netif->state; |
| struct pbuf *q; |
| |
| initiate transfer(); |
| |
| #if ETH_PAD_SIZE |
| pbuf_header(p, -ETH_PAD_SIZE); /* drop the padding word */ |
| #endif |
| |
| for(q = p; q != NULL; q = q->next) { |
| /* Send the data from the pbuf to the interface, one pbuf at a |
| time. The size of the data in each pbuf is kept in the ->len |
| variable. */ |
| send data from(q->payload, q->len); |
| } |
| |
| signal that packet should be sent(); |
| |
| #if ETH_PAD_SIZE |
| pbuf_header(p, ETH_PAD_SIZE); /* reclaim the padding word */ |
| #endif |
| |
| #if LINK_STATS |
| lwip_stats.link.xmit++; |
| #endif /* LINK_STATS */ |
| |
| return ERR_OK; |
| } |
| |
| /* |
| * low_level_input(): |
| * |
| * Should allocate a pbuf and transfer the bytes of the incoming |
| * packet from the interface into the pbuf. |
| * |
| */ |
| |
| static struct pbuf * |
| low_level_input(struct netif *netif) |
| { |
| struct ethernetif *ethernetif = netif->state; |
| struct pbuf *p, *q; |
| u16_t len; |
| |
| /* Obtain the size of the packet and put it into the "len" |
| variable. */ |
| len = ; |
| |
| #if ETH_PAD_SIZE |
| len += ETH_PAD_SIZE; /* allow room for Ethernet padding */ |
| #endif |
| |
| /* We allocate a pbuf chain of pbufs from the pool. */ |
| p = pbuf_alloc(PBUF_RAW, len, PBUF_POOL); |
| |
| if (p != NULL) { |
| |
| #if ETH_PAD_SIZE |
| pbuf_header(p, -ETH_PAD_SIZE); /* drop the padding word */ |
| #endif |
| |
| /* We iterate over the pbuf chain until we have read the entire |
| * packet into the pbuf. */ |
| for(q = p; q != NULL; q = q->next) { |
| /* Read enough bytes to fill this pbuf in the chain. The |
| * available data in the pbuf is given by the q->len |
| * variable. */ |
| read data into(q->payload, q->len); |
| } |
| acknowledge that packet has been read(); |
| |
| #if ETH_PAD_SIZE |
| pbuf_header(p, ETH_PAD_SIZE); /* reclaim the padding word */ |
| #endif |
| |
| #if LINK_STATS |
| lwip_stats.link.recv++; |
| #endif /* LINK_STATS */ |
| } else { |
| drop packet(); |
| #if LINK_STATS |
| lwip_stats.link.memerr++; |
| lwip_stats.link.drop++; |
| #endif /* LINK_STATS */ |
| } |
| |
| return p; |
| } |
| |
| /* |
| * ethernetif_output(): |
| * |
| * This function is called by the TCP/IP stack when an IP packet |
| * should be sent. It calls the function called low_level_output() to |
| * do the actual transmission of the packet. |
| * |
| */ |
| |
| static err_t |
| ethernetif_output(struct netif *netif, struct pbuf *p, |
| struct ip_addr *ipaddr) |
| { |
| |
| /* resolve hardware address, then send (or queue) packet */ |
| return etharp_output(netif, ipaddr, p); |
| |
| } |
| |
| /* |
| * ethernetif_input(): |
| * |
| * This function should be called when a packet is ready to be read |
| * from the interface. It uses the function low_level_input() that |
| * should handle the actual reception of bytes from the network |
| * interface. |
| * |
| */ |
| |
| static void |
| ethernetif_input(struct netif *netif) |
| { |
| struct ethernetif *ethernetif; |
| struct eth_hdr *ethhdr; |
| struct pbuf *p; |
| |
| ethernetif = netif->state; |
| |
| /* move received packet into a new pbuf */ |
| p = low_level_input(netif); |
| /* no packet could be read, silently ignore this */ |
| if (p == NULL) return; |
| /* points to packet payload, which starts with an Ethernet header */ |
| ethhdr = p->payload; |
| |
| #if LINK_STATS |
| lwip_stats.link.recv++; |
| #endif /* LINK_STATS */ |
| |
| ethhdr = p->payload; |
| |
| switch (htons(ethhdr->type)) { |
| /* IP packet? */ |
| case ETHTYPE_IP: |
| /* update ARP table */ |
| etharp_ip_input(netif, p); |
| /* skip Ethernet header */ |
| pbuf_header(p, -sizeof(struct eth_hdr)); |
| /* pass to network layer */ |
| netif->input(p, netif); |
| break; |
| |
| case ETHTYPE_ARP: |
| /* pass p to ARP module */ |
| etharp_arp_input(netif, ethernetif->ethaddr, p); |
| break; |
| default: |
| pbuf_free(p); |
| p = NULL; |
| break; |
| } |
| } |
| |
| static void |
| arp_timer(void *arg) |
| { |
| etharp_tmr(); |
| sys_timeout(ARP_TMR_INTERVAL, arp_timer, NULL); |
| } |
| |
| /* |
| * ethernetif_init(): |
| * |
| * Should be called at the beginning of the program to set up the |
| * network interface. It calls the function low_level_init() to do the |
| * actual setup of the hardware. |
| * |
| */ |
| |
| err_t |
| ethernetif_init(struct netif *netif) |
| { |
| struct ethernetif *ethernetif; |
| |
| ethernetif = mem_malloc(sizeof(struct ethernetif)); |
| |
| if (ethernetif == NULL) |
| { |
| LWIP_DEBUGF(NETIF_DEBUG, ("ethernetif_init: out of memory\n")); |
| return ERR_MEM; |
| } |
| |
| netif->state = ethernetif; |
| netif->name[0] = IFNAME0; |
| netif->name[1] = IFNAME1; |
| netif->output = ethernetif_output; |
| netif->linkoutput = low_level_output; |
| |
| ethernetif->ethaddr = (struct eth_addr *)&(netif->hwaddr[0]); |
| |
| low_level_init(netif); |
| |
| etharp_init(); |
| |
| sys_timeout(ARP_TMR_INTERVAL, arp_timer, NULL); |
| |
| return ERR_OK; |
| } |
| |