copper: display: Add support to enable display.
Enabling splash screen support for copper.
Change-Id: Ic75527eef7c2aea8a2d699fcbb9ef3c07c98fdd3
diff --git a/target/copper/include/target/display.h b/target/copper/include/target/display.h
new file mode 100644
index 0000000..0687d24
--- /dev/null
+++ b/target/copper/include/target/display.h
@@ -0,0 +1,45 @@
+/* Copyright (c) 2012-2013, The Linux Foundation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials provided
+ * with the distribution.
+ * * Neither the name of The Linux Foundation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+#ifndef _TARGET_COPPER_DISPLAY_H
+#define _TARGET_COPPER_DISPLAY_H
+
+#define MIPI_FB_ADDR 0x08400000
+
+#define MIPI_HSYNC_PULSE_WIDTH 12
+#define MIPI_HSYNC_BACK_PORCH_DCLK 32
+#define MIPI_HSYNC_FRONT_PORCH_DCLK 144
+
+#define MIPI_VSYNC_PULSE_WIDTH 4
+#define MIPI_VSYNC_BACK_PORCH_LINES 3
+#define MIPI_VSYNC_FRONT_PORCH_LINES 9
+
+extern int mdss_dsi_phy_init(struct mipi_dsi_panel_config *);
+extern int mdss_dsi_uniphy_pll_config(void);
+
+#endif
diff --git a/target/copper/init.c b/target/copper/init.c
index 2a2d098..71ccc96 100644
--- a/target/copper/init.c
+++ b/target/copper/init.c
@@ -152,6 +152,11 @@
if (target_use_signed_kernel())
target_crypto_init_params();
+ /* Display splash screen if enabled */
+#if DISPLAY_SPLASH_SCREEN
+ display_init();
+ dprintf(SPEW, "Diplay initialized\n");
+#endif
/* Trying Slot 1*/
slot = 1;
@@ -243,3 +248,15 @@
dprintf(CRITICAL, "Rebooting failed\n");
}
+
+/* Returns 1 if target supports continuous splash screen. */
+int target_cont_splash_screen()
+{
+ switch(board_platform_id())
+ {
+ case HW_PLATFORM_SURF:
+ case HW_PLATFORM_FFA:
+ default:
+ return 0;
+ }
+}
diff --git a/target/copper/rules.mk b/target/copper/rules.mk
index 73eb416..0d35f49 100644
--- a/target/copper/rules.mk
+++ b/target/copper/rules.mk
@@ -14,10 +14,15 @@
RAMDISK_ADDR := BASE_ADDR+0x01000000
SCRATCH_ADDR := 0x11000000
+DEFINES += DISPLAY_SPLASH_SCREEN=1
+DEFINES += DISPLAY_TYPE_MIPI=1
+DEFINES += DISPLAY_TYPE_DSI6G=1
+
MODULES += \
dev/keys \
- lib/ptable \
dev/pmic/pm8x41 \
+ dev/panel/msm \
+ lib/ptable \
lib/libfdt
DEFINES += \
@@ -32,4 +37,5 @@
OBJS += \
$(LOCAL_DIR)/init.o \
- $(LOCAL_DIR)/meminfo.o
+ $(LOCAL_DIR)/meminfo.o \
+ $(LOCAL_DIR)/target_display.o
diff --git a/target/copper/target_display.c b/target/copper/target_display.c
new file mode 100644
index 0000000..29268c6
--- /dev/null
+++ b/target/copper/target_display.c
@@ -0,0 +1,169 @@
+/* Copyright (c) 2012-2013, The Linux Foundation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of The Linux Foundation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+ * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+#include <debug.h>
+#include <smem.h>
+#include <msm_panel.h>
+#include <pm8x41.h>
+#include <pm8x41_wled.h>
+#include <board.h>
+#include <mdp5.h>
+#include <platform/gpio.h>
+#include <target/display.h>
+
+static struct msm_fb_panel_data panel;
+static uint8_t display_enable;
+
+extern int msm_display_init(struct msm_fb_panel_data *pdata);
+extern int msm_display_off();
+extern int mdss_dsi_uniphy_pll_config(void);
+
+static int msm8974_backlight_on()
+{
+ static struct pm8x41_wled_data wled_ctrl = {
+ .mod_scheme = 0xC3,
+ .led1_brightness = (0x0F << 8) | 0xEF,
+ .led2_brightness = (0x0F << 8) | 0xEF,
+ .led3_brightness = (0x0F << 8) | 0xEF,
+ .max_duty_cycle = 0x01,
+ };
+
+ pm8x41_wled_config(&wled_ctrl);
+ pm8x41_wled_sink_control(1);
+ pm8x41_wled_iled_sync_control(1);
+ pm8x41_wled_enable(1);
+
+ return 0;
+}
+
+static int msm8974_mdss_dsi_panel_clock(uint8_t enable)
+{
+ if (enable) {
+ mdp_gdsc_ctrl(enable);
+ mdp_clock_init();
+ mdss_dsi_uniphy_pll_config();
+ mmss_clock_init();
+ } else if(!target_cont_splash_screen()) {
+ // * Add here for continuous splash *
+ }
+
+ return 0;
+}
+
+/* Pull DISP_RST_N high to get panel out of reset */
+static void msm8974_mdss_mipi_panel_reset(void)
+{
+ struct pm8x41_gpio gpio19_param = {
+ .direction = PM_GPIO_DIR_OUT,
+ .output_buffer = PM_GPIO_OUT_CMOS,
+ .out_strength = PM_GPIO_OUT_DRIVE_MED,
+ };
+
+ pm8x41_gpio_config(19, &gpio19_param);
+ gpio_tlmm_config(58, 0, GPIO_OUTPUT, GPIO_NO_PULL, GPIO_8MA, GPIO_DISABLE);
+
+ pm8x41_gpio_set(19, PM_GPIO_FUNC_HIGH);
+ mdelay(2);
+ pm8x41_gpio_set(19, PM_GPIO_FUNC_LOW);
+ mdelay(5);
+ pm8x41_gpio_set(19, PM_GPIO_FUNC_HIGH);
+ mdelay(2);
+ gpio_set(58, 2);
+}
+
+
+static int msm8974_mipi_panel_power(uint8_t enable)
+{
+ if (enable) {
+
+ /* Enable backlight */
+ msm8974_backlight_on();
+
+ /* Turn on LDO8 for lcd1 mipi vdd */
+ dprintf(SPEW, " Setting LDO22\n");
+ pm8x41_ldo_set_voltage("LDO22", 3000000);
+ pm8x41_ldo_control("LDO22", enable);
+
+ dprintf(SPEW, " Setting LDO12\n");
+ /* Turn on LDO23 for lcd1 mipi vddio */
+ pm8x41_ldo_set_voltage("LDO12", 1800000);
+ pm8x41_ldo_control("LDO12", enable);
+
+ dprintf(SPEW, " Setting LDO2\n");
+ /* Turn on LDO2 for vdda_mipi_dsi */
+ pm8x41_ldo_set_voltage("LDO2", 1200000);
+ pm8x41_ldo_control("LDO2", enable);
+
+ dprintf(SPEW, " Panel Reset \n");
+ /* Panel Reset */
+ msm8974_mdss_mipi_panel_reset();
+ dprintf(SPEW, " Panel Reset Done\n");
+ }
+
+ return 0;
+}
+
+void display_init(void)
+{
+ uint32_t hw_id = board_hardware_id();
+
+ dprintf(INFO, "display_init(),target_id=%d.\n", hw_id);
+
+ switch (hw_id) {
+ case HW_PLATFORM_SURF:
+ case HW_PLATFORM_MTP:
+ case HW_PLATFORM_FLUID:
+ mipi_toshiba_video_720p_init(&(panel.panel_info));
+ panel.clk_func = msm8974_mdss_dsi_panel_clock;
+ panel.power_func = msm8974_mipi_panel_power;
+ panel.fb.base = MIPI_FB_ADDR;
+ panel.fb.width = panel.panel_info.xres;
+ panel.fb.height = panel.panel_info.yres;
+ panel.fb.stride = panel.panel_info.xres;
+ panel.fb.bpp = panel.panel_info.bpp;
+ panel.fb.format = FB_FORMAT_RGB888;
+ panel.mdp_rev = MDP_REV_50;
+ break;
+ default:
+ return;
+ };
+
+ if (msm_display_init(&panel)) {
+ dprintf(CRITICAL, "Display init failed!\n");
+ return;
+ }
+
+ display_enable = 1;
+}
+
+void display_shutdown(void)
+{
+ if (display_enable)
+ msm_display_off();
+}