| /* apps/apps.h */ |
| /* Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) |
| * All rights reserved. |
| * |
| * This package is an SSL implementation written |
| * by Eric Young (eay@cryptsoft.com). |
| * The implementation was written so as to conform with Netscapes SSL. |
| * |
| * This library is free for commercial and non-commercial use as long as |
| * the following conditions are aheared to. The following conditions |
| * apply to all code found in this distribution, be it the RC4, RSA, |
| * lhash, DES, etc., code; not just the SSL code. The SSL documentation |
| * included with this distribution is covered by the same copyright terms |
| * except that the holder is Tim Hudson (tjh@cryptsoft.com). |
| * |
| * Copyright remains Eric Young's, and as such any Copyright notices in |
| * the code are not to be removed. |
| * If this package is used in a product, Eric Young should be given attribution |
| * as the author of the parts of the library used. |
| * This can be in the form of a textual message at program startup or |
| * in documentation (online or textual) provided with the package. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the copyright |
| * notice, this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * 3. All advertising materials mentioning features or use of this software |
| * must display the following acknowledgement: |
| * "This product includes cryptographic software written by |
| * Eric Young (eay@cryptsoft.com)" |
| * The word 'cryptographic' can be left out if the rouines from the library |
| * being used are not cryptographic related :-). |
| * 4. If you include any Windows specific code (or a derivative thereof) from |
| * the apps directory (application code) you must include an acknowledgement: |
| * "This product includes software written by Tim Hudson (tjh@cryptsoft.com)" |
| * |
| * THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND |
| * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE |
| * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT |
| * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY |
| * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF |
| * SUCH DAMAGE. |
| * |
| * The licence and distribution terms for any publically available version or |
| * derivative of this code cannot be changed. i.e. this code cannot simply be |
| * copied and put under another distribution licence |
| * [including the GNU Public Licence.] |
| */ |
| /* ==================================================================== |
| * Copyright (c) 1998-2001 The OpenSSL Project. All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in |
| * the documentation and/or other materials provided with the |
| * distribution. |
| * |
| * 3. All advertising materials mentioning features or use of this |
| * software must display the following acknowledgment: |
| * "This product includes software developed by the OpenSSL Project |
| * for use in the OpenSSL Toolkit. (http://www.openssl.org/)" |
| * |
| * 4. The names "OpenSSL Toolkit" and "OpenSSL Project" must not be used to |
| * endorse or promote products derived from this software without |
| * prior written permission. For written permission, please contact |
| * openssl-core@openssl.org. |
| * |
| * 5. Products derived from this software may not be called "OpenSSL" |
| * nor may "OpenSSL" appear in their names without prior written |
| * permission of the OpenSSL Project. |
| * |
| * 6. Redistributions of any form whatsoever must retain the following |
| * acknowledgment: |
| * "This product includes software developed by the OpenSSL Project |
| * for use in the OpenSSL Toolkit (http://www.openssl.org/)" |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ``AS IS'' AND ANY |
| * EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR |
| * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT OR |
| * ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, |
| * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT |
| * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
| * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, |
| * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
| * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED |
| * OF THE POSSIBILITY OF SUCH DAMAGE. |
| * ==================================================================== |
| * |
| * This product includes cryptographic software written by Eric Young |
| * (eay@cryptsoft.com). This product includes software written by Tim |
| * Hudson (tjh@cryptsoft.com). |
| * |
| */ |
| |
| #ifndef HEADER_APPS_H |
| #define HEADER_APPS_H |
| |
| #include "e_os.h" |
| |
| #include <openssl/bio.h> |
| #include <openssl/x509.h> |
| #include <openssl/lhash.h> |
| #include <openssl/conf.h> |
| #include <openssl/txt_db.h> |
| #ifndef OPENSSL_NO_ENGINE |
| #include <openssl/engine.h> |
| #endif |
| #ifndef OPENSSL_NO_OCSP |
| #include <openssl/ocsp.h> |
| #endif |
| #include <openssl/ossl_typ.h> |
| |
| int app_RAND_load_file(const char *file, BIO *bio_e, int dont_warn); |
| int app_RAND_write_file(const char *file, BIO *bio_e); |
| /* When `file' is NULL, use defaults. |
| * `bio_e' is for error messages. */ |
| void app_RAND_allow_write_file(void); |
| long app_RAND_load_files(char *file); /* `file' is a list of files to read, |
| * separated by LIST_SEPARATOR_CHAR |
| * (see e_os.h). The string is |
| * destroyed! */ |
| |
| #ifndef MONOLITH |
| |
| #define MAIN(a,v) main(a,v) |
| |
| #ifndef NON_MAIN |
| CONF *config=NULL; |
| BIO *bio_err=NULL; |
| #else |
| extern CONF *config; |
| extern BIO *bio_err; |
| #endif |
| |
| #else |
| |
| #define MAIN(a,v) PROG(a,v) |
| extern CONF *config; |
| extern char *default_config_file; |
| extern BIO *bio_err; |
| |
| #endif |
| |
| #ifndef OPENSSL_SYS_NETWARE |
| #include <signal.h> |
| #endif |
| |
| #ifdef SIGPIPE |
| #define do_pipe_sig() signal(SIGPIPE,SIG_IGN) |
| #else |
| #define do_pipe_sig() |
| #endif |
| |
| #ifdef OPENSSL_NO_COMP |
| #define zlib_cleanup() |
| #else |
| #define zlib_cleanup() COMP_zlib_cleanup() |
| #endif |
| |
| #if defined(MONOLITH) && !defined(OPENSSL_C) |
| # define apps_startup() \ |
| do_pipe_sig() |
| # define apps_shutdown() |
| #else |
| # ifndef OPENSSL_NO_ENGINE |
| # define apps_startup() \ |
| do { do_pipe_sig(); CRYPTO_malloc_init(); \ |
| ERR_load_crypto_strings(); OpenSSL_add_all_algorithms(); \ |
| ENGINE_load_builtin_engines(); setup_ui_method(); } while(0) |
| # define apps_shutdown() \ |
| do { CONF_modules_unload(1); destroy_ui_method(); \ |
| OBJ_cleanup(); EVP_cleanup(); ENGINE_cleanup(); \ |
| CRYPTO_cleanup_all_ex_data(); ERR_remove_thread_state(NULL); \ |
| ERR_free_strings(); zlib_cleanup();} while(0) |
| # else |
| # define apps_startup() \ |
| do { do_pipe_sig(); CRYPTO_malloc_init(); \ |
| ERR_load_crypto_strings(); OpenSSL_add_all_algorithms(); \ |
| setup_ui_method(); } while(0) |
| # define apps_shutdown() \ |
| do { CONF_modules_unload(1); destroy_ui_method(); \ |
| OBJ_cleanup(); EVP_cleanup(); \ |
| CRYPTO_cleanup_all_ex_data(); ERR_remove_thread_state(NULL); \ |
| ERR_free_strings(); zlib_cleanup(); } while(0) |
| # endif |
| #endif |
| |
| #ifdef OPENSSL_SYSNAME_WIN32 |
| # define openssl_fdset(a,b) FD_SET((unsigned int)a, b) |
| #else |
| # define openssl_fdset(a,b) FD_SET(a, b) |
| #endif |
| |
| |
| typedef struct args_st |
| { |
| char **data; |
| int count; |
| } ARGS; |
| |
| #define PW_MIN_LENGTH 4 |
| typedef struct pw_cb_data |
| { |
| const void *password; |
| const char *prompt_info; |
| } PW_CB_DATA; |
| |
| int password_callback(char *buf, int bufsiz, int verify, |
| PW_CB_DATA *cb_data); |
| |
| int setup_ui_method(void); |
| void destroy_ui_method(void); |
| |
| int should_retry(int i); |
| int args_from_file(char *file, int *argc, char **argv[]); |
| int str2fmt(char *s); |
| void program_name(char *in,char *out,int size); |
| int chopup_args(ARGS *arg,char *buf, int *argc, char **argv[]); |
| #ifdef HEADER_X509_H |
| int dump_cert_text(BIO *out, X509 *x); |
| void print_name(BIO *out, const char *title, X509_NAME *nm, unsigned long lflags); |
| #endif |
| int set_cert_ex(unsigned long *flags, const char *arg); |
| int set_name_ex(unsigned long *flags, const char *arg); |
| int set_ext_copy(int *copy_type, const char *arg); |
| int copy_extensions(X509 *x, X509_REQ *req, int copy_type); |
| int app_passwd(BIO *err, char *arg1, char *arg2, char **pass1, char **pass2); |
| int add_oid_section(BIO *err, CONF *conf); |
| X509 *load_cert(BIO *err, const char *file, int format, |
| const char *pass, ENGINE *e, const char *cert_descrip); |
| EVP_PKEY *load_key(BIO *err, const char *file, int format, int maybe_stdin, |
| const char *pass, ENGINE *e, const char *key_descrip); |
| EVP_PKEY *load_pubkey(BIO *err, const char *file, int format, int maybe_stdin, |
| const char *pass, ENGINE *e, const char *key_descrip); |
| STACK_OF(X509) *load_certs(BIO *err, const char *file, int format, |
| const char *pass, ENGINE *e, const char *cert_descrip); |
| STACK_OF(X509_CRL) *load_crls(BIO *err, const char *file, int format, |
| const char *pass, ENGINE *e, const char *cert_descrip); |
| X509_STORE *setup_verify(BIO *bp, char *CAfile, char *CApath); |
| #ifndef OPENSSL_NO_ENGINE |
| ENGINE *setup_engine(BIO *err, const char *engine, int debug); |
| #endif |
| |
| #ifndef OPENSSL_NO_OCSP |
| OCSP_RESPONSE *process_responder(BIO *err, OCSP_REQUEST *req, |
| char *host, char *path, char *port, int use_ssl, |
| STACK_OF(CONF_VALUE) *headers, |
| int req_timeout); |
| #endif |
| |
| int load_config(BIO *err, CONF *cnf); |
| char *make_config_name(void); |
| |
| /* Functions defined in ca.c and also used in ocsp.c */ |
| int unpack_revinfo(ASN1_TIME **prevtm, int *preason, ASN1_OBJECT **phold, |
| ASN1_GENERALIZEDTIME **pinvtm, const char *str); |
| |
| #define DB_type 0 |
| #define DB_exp_date 1 |
| #define DB_rev_date 2 |
| #define DB_serial 3 /* index - unique */ |
| #define DB_file 4 |
| #define DB_name 5 /* index - unique when active and not disabled */ |
| #define DB_NUMBER 6 |
| |
| #define DB_TYPE_REV 'R' |
| #define DB_TYPE_EXP 'E' |
| #define DB_TYPE_VAL 'V' |
| |
| typedef struct db_attr_st |
| { |
| int unique_subject; |
| } DB_ATTR; |
| typedef struct ca_db_st |
| { |
| DB_ATTR attributes; |
| TXT_DB *db; |
| } CA_DB; |
| |
| BIGNUM *load_serial(char *serialfile, int create, ASN1_INTEGER **retai); |
| int save_serial(char *serialfile, char *suffix, BIGNUM *serial, ASN1_INTEGER **retai); |
| int rotate_serial(char *serialfile, char *new_suffix, char *old_suffix); |
| int rand_serial(BIGNUM *b, ASN1_INTEGER *ai); |
| CA_DB *load_index(char *dbfile, DB_ATTR *dbattr); |
| int index_index(CA_DB *db); |
| int save_index(const char *dbfile, const char *suffix, CA_DB *db); |
| int rotate_index(const char *dbfile, const char *new_suffix, const char *old_suffix); |
| void free_index(CA_DB *db); |
| #define index_name_cmp_noconst(a, b) \ |
| index_name_cmp((const OPENSSL_CSTRING *)CHECKED_PTR_OF(OPENSSL_STRING, a), \ |
| (const OPENSSL_CSTRING *)CHECKED_PTR_OF(OPENSSL_STRING, b)) |
| int index_name_cmp(const OPENSSL_CSTRING *a, const OPENSSL_CSTRING *b); |
| int parse_yesno(const char *str, int def); |
| |
| X509_NAME *parse_name(char *str, long chtype, int multirdn); |
| int args_verify(char ***pargs, int *pargc, |
| int *badarg, BIO *err, X509_VERIFY_PARAM **pm); |
| void policies_print(BIO *out, X509_STORE_CTX *ctx); |
| int bio_to_mem(unsigned char **out, int maxlen, BIO *in); |
| int pkey_ctrl_string(EVP_PKEY_CTX *ctx, char *value); |
| int init_gen_str(BIO *err, EVP_PKEY_CTX **pctx, |
| const char *algname, ENGINE *e, int do_param); |
| #ifndef OPENSSL_NO_PSK |
| extern char *psk_key; |
| #endif |
| #ifndef OPENSSL_NO_JPAKE |
| void jpake_client_auth(BIO *out, BIO *conn, const char *secret); |
| void jpake_server_auth(BIO *out, BIO *conn, const char *secret); |
| #endif |
| |
| #define FORMAT_UNDEF 0 |
| #define FORMAT_ASN1 1 |
| #define FORMAT_TEXT 2 |
| #define FORMAT_PEM 3 |
| #define FORMAT_NETSCAPE 4 |
| #define FORMAT_PKCS12 5 |
| #define FORMAT_SMIME 6 |
| #define FORMAT_ENGINE 7 |
| #define FORMAT_IISSGC 8 /* XXX this stupid macro helps us to avoid |
| * adding yet another param to load_*key() */ |
| #define FORMAT_PEMRSA 9 /* PEM RSAPubicKey format */ |
| #define FORMAT_ASN1RSA 10 /* DER RSAPubicKey format */ |
| #define FORMAT_MSBLOB 11 /* MS Key blob format */ |
| #define FORMAT_PVK 12 /* MS PVK file format */ |
| |
| #define EXT_COPY_NONE 0 |
| #define EXT_COPY_ADD 1 |
| #define EXT_COPY_ALL 2 |
| |
| #define NETSCAPE_CERT_HDR "certificate" |
| |
| #define APP_PASS_LEN 1024 |
| |
| #define SERIAL_RAND_BITS 64 |
| |
| int app_isdir(const char *); |
| int raw_read_stdin(void *,int); |
| int raw_write_stdout(const void *,int); |
| |
| #define TM_START 0 |
| #define TM_STOP 1 |
| double app_tminterval (int stop,int usertime); |
| #endif |