/*
 * Copyright (c) 2008 Travis Geiselbrecht
 *
 * Copyright (c) 2015, The Linux Foundation. All rights reserved.
 *
 * Permission is hereby granted, free of charge, to any person obtaining
 * a copy of this software and associated documentation files
 * (the "Software"), to deal in the Software without restriction,
 * including without limitation the rights to use, copy, modify, merge,
 * publish, distribute, sublicense, and/or sell copies of the Software,
 * and to permit persons to whom the Software is furnished to do so,
 * subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be
 * included in all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
 * IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY
 * CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
 * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
 * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
 */
#include <err.h>
#include <debug.h>
#include <target.h>
#include <compiler.h>
#include <dload_util.h>
#include <sdhci_msm.h>
#if PON_VIB_SUPPORT
#include <smem.h>
#include <vibrator.h>
#include <board.h>
#endif

#include <smem.h>
#include <pm8x41_adc.h>
#include <pm8x41_hw.h>

#if CHECK_BAT_VOLTAGE
#include <pm_fg_adc_usr.h>
#endif

#define EXPAND(NAME) #NAME
#define TARGET(NAME) EXPAND(NAME)

#define BATTERY_MIN_VOLTAGE		3200000  //uv
#define PMIC_SLAVE_ID                   0x20000
#define BAT_IF_BAT_PRES_STATUS		0x1208

/*
 * default implementations of these routines, if the target code
 * chooses not to implement.
 */

__WEAK void target_early_init(void)
{
}

__WEAK void target_init(void)
{
}

__WEAK void *target_get_scratch_address(void)
{
    return (void *)(SCRATCH_ADDR);
}

__WEAK unsigned target_get_max_flash_size(void)
{
    return (120 * 1024 * 1024);
}

__WEAK int flash_ubi_img(void)
{
    return 0;
}

__WEAK int update_ubi_vol(void)
{
    return 0;
}

__WEAK int target_is_emmc_boot(void)
{
#if _EMMC_BOOT
    return 1;
#else
    return 0;
#endif
}

__WEAK unsigned check_reboot_mode(void)
{
    return 0;
}

__WEAK unsigned check_hard_reboot_mode(void)
{
    return 0;
}

__WEAK void reboot_device(unsigned reboot_reason)
{
}

__WEAK uint32_t is_user_force_reset(void)
{
	return 0;
}

__WEAK int set_download_mode(enum dload_mode mode)
{
	return -1;
}

__WEAK unsigned target_pause_for_battery_charge(void)
{
    return 0;
}

__WEAK unsigned target_baseband()
{
	return 0;
}

__WEAK void target_serialno(unsigned char *buf)
{
	snprintf((char *) buf, 13, "%s",TARGET(BOARD));
}

__WEAK void target_fastboot_init()
{
}

__WEAK int emmc_recovery_init(void)
{
	return 0;
}

__WEAK bool target_use_signed_kernel(void)
{
#if _SIGNED_KERNEL
	return 1;
#else
	return 0;
#endif
}

__WEAK bool target_is_ssd_enabled(void)
{
#ifdef SSD_ENABLE
	return 1;
#else
	return 0;
#endif
}

__WEAK void target_load_ssd_keystore(void)
{
}

/* Default target does not support continuous splash screen feature. */
__WEAK int target_cont_splash_screen()
{
	return 0;
}

/* Default target specific initialization before using USB */
__WEAK void target_usb_init(void)
{
}

/* Default target specific usb shutdown */
__WEAK void target_usb_stop(void)
{
}

/* Default target specific target uninit */
__WEAK void target_uninit(void)
{
}

__WEAK bool target_display_panel_node(char *pbuf, uint16_t buf_size)
{
	return false;
}

__WEAK void target_display_init(const char *panel_name)
{
}

__WEAK void target_display_shutdown(void)
{
}

__WEAK uint8_t target_panel_auto_detect_enabled()
{
	return 0;
}

__WEAK uint8_t target_is_edp()
{
	return 0;
}

/* default usb controller to be used. */
__WEAK const char * target_usb_controller()
{
	return "ci";
}

/* override for target specific usb phy reset. */
__WEAK void target_usb_phy_reset(void)
{
}

/* determine if target is in warm boot. */
__WEAK bool target_warm_boot(void)
{
	return false;
}

/* Determine the HLOS subtype of the target */
__WEAK uint32_t target_get_hlos_subtype(void)
{
	return 0;
}

/* Initialize crypto parameters */
__WEAK void target_crypto_init_params()
{
}

/* Default CFG delay value */
__WEAK uint32_t target_ddr_cfg_val()
{
	return DDR_CONFIG_VAL;
}

#if PON_VIB_SUPPORT
void get_vibration_type(struct qpnp_hap *config)
{
	uint32_t hw_id = board_hardware_id();
	uint32_t platform = board_platform_id();

	config->vib_type = VIB_ERM_TYPE;
	config->hap_rate_cfg1 = QPNP_HAP_RATE_CFG1_1c;
	config->hap_rate_cfg2 = QPNP_HAP_RATE_CFG2_04;
	switch(hw_id){
	case HW_PLATFORM_MTP:
		switch(platform){
		case MSM8952:
			config->vib_type = VIB_ERM_TYPE;
			break;
		case MSM8976:
		case MSM8956:
		case APQ8056:
			config->vib_type = VIB_LRA_TYPE;
			break;
		case MSM8937:
		case APQ8037:
			config->vib_type = VIB_LRA_TYPE;
			config->hap_rate_cfg1 = QPNP_HAP_RATE_CFG1_41;
			config->hap_rate_cfg2 = QPNP_HAP_RATE_CFG2_03;
		default:
			dprintf(CRITICAL,"Unsupported platform id\n");
			break;
		}
		break;
	case HW_PLATFORM_QRD:
		config->vib_type = VIB_ERM_TYPE;
		break;
	default:
		dprintf(CRITICAL,"Unsupported hardware id\n");
		break;
	}
}
#endif

/* Return Build variant */
__WEAK bool target_build_variant_user()
{
#if USER_BUILD_VARIANT
	return true;
#else
	return false;
#endif
}

__WEAK uint32_t target_get_pmic()
{
	return PMIC_IS_UNKNOWN;
}

/* Check battery if it's exist */
bool target_battery_is_present()
{
	bool batt_is_exist;
	uint8_t value = 0;
	uint32_t pmic;

	pmic = target_get_pmic();

	switch(pmic)
	{
		case PMIC_IS_PM8909:
		case PMIC_IS_PM8916:
		case PMIC_IS_PM8941:
			value = REG_READ(BAT_IF_BAT_PRES_STATUS);
			break;
		case PMIC_IS_PMI8950:
		case PMIC_IS_PMI8994:
		case PMIC_IS_PMI8996:
			value = REG_READ(PMIC_SLAVE_ID|
			BAT_IF_BAT_PRES_STATUS);
			break;
		default:
			dprintf(CRITICAL, "ERROR: Couldn't get the pmic type\n");
			break;
	}

	batt_is_exist = value >> 7;

	return batt_is_exist;

}

#if CHECK_BAT_VOLTAGE
/* Return battery voltage */
uint32_t target_get_battery_voltage()
{
	uint32_t pmic;
	uint32_t vbat = 0;

	pmic = target_get_pmic();

	switch(pmic)
	{
		case PMIC_IS_PM8909:
		case PMIC_IS_PM8916:
		case PMIC_IS_PM8941:
			vbat = pm8x41_get_batt_voltage(); //uv
			break;
		case PMIC_IS_PMI8950:
		case PMIC_IS_PMI8994:
		case PMIC_IS_PMI8996:
			if (!pm_fg_usr_get_vbat(1, &vbat)) {
				vbat = vbat*1000; //uv
			} else {
				dprintf(CRITICAL, "ERROR: Get battery voltage failed!!!\n");
			}
			break;
		default:
			dprintf(CRITICAL, "ERROR: Couldn't get the pmic type\n");
			break;
	}

	return vbat;
}

/* Add safeguards such as refusing to flash if minimum battery levels
 * are not present or be bypass if the device doesn't have a battery
 */
bool target_battery_soc_ok()
{
	if (!target_battery_is_present()) {
		dprintf(INFO, "battery is not present\n");
		return true;
	}

	if (target_get_battery_voltage() >= BATTERY_MIN_VOLTAGE)
		return true;

	return false;
}
#endif