blob: a0af57c804efbfc1bde8ac46e28b44f00a5fcdf8 [file] [log] [blame]
/* Copyright (c) 2014, The Linux Foundation. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials provided
* with the distribution.
* * Neither the name of The Linux Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
* BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
* OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
* IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <debug.h>
#include <reg.h>
#include <platform/iomap.h>
#include <platform/gpio.h>
#include <blsp_qup.h>
void gpio_tlmm_config(uint32_t gpio, uint8_t func,
uint8_t dir, uint8_t pull,
uint8_t drvstr, uint32_t enable)
{
uint32_t val = 0;
val |= pull;
val |= func << 2;
val |= drvstr << 6;
val |= enable << 9;
writel(val, (uint32_t *)GPIO_CONFIG_ADDR(gpio));
return;
}
void gpio_set_dir(uint32_t gpio, uint32_t dir)
{
writel(dir, (uint32_t *)GPIO_IN_OUT_ADDR(gpio));
return;
}
void gpio_set_value(uint32_t gpio, uint32_t value)
{
/* GPIO_OUTPUT */
if (value) {
writel(GPIO_OUT_VAL(gpio),
(uint32_t *)GPIO_OUT_SET_ADDR(gpio));
} else {
writel(GPIO_OUT_VAL(gpio),
(uint32_t *)GPIO_OUT_CLR_ADDR(gpio));
}
/* GPIO_OE */
writel(GPIO_OUT_OE_VAL(gpio),
(uint32_t *)GPIO_OUT_OE_SET_ADDR(gpio));
return;
}
uint32_t gpio_status(uint32_t gpio)
{
return readl(GPIO_IN_OUT_ADDR(gpio)) & GPIO_IN;
}
/* Configure gpio for blsp uart 2 */
void gpio_config_uart_dm(uint8_t id)
{
/* configure rx gpio */
gpio_tlmm_config(5, 2, GPIO_INPUT, GPIO_NO_PULL,
GPIO_8MA, GPIO_DISABLE);
/* configure tx gpio */
gpio_tlmm_config(4, 2, GPIO_OUTPUT, GPIO_NO_PULL,
GPIO_8MA, GPIO_DISABLE);
}
void gpio_config_blsp_i2c(uint8_t blsp_id, uint8_t qup_id)
{
if(blsp_id == BLSP_ID_1) {
switch (qup_id) {
case QUP_ID_1:
/* configure I2C SDA gpio */
gpio_tlmm_config(6, 3, GPIO_OUTPUT, GPIO_NO_PULL,
GPIO_8MA, GPIO_DISABLE);
/* configure I2C SCL gpio */
gpio_tlmm_config(7, 3, GPIO_OUTPUT, GPIO_NO_PULL,
GPIO_8MA, GPIO_DISABLE);
break;
default:
dprintf(CRITICAL, "Incorrect QUP id %d\n",qup_id);
ASSERT(0);
};
} else {
dprintf(CRITICAL, "Incorrect BLSP id %d\n",blsp_id);
ASSERT(0);
}
}