blob: 90cfcdb8260cb3b208b3c40693ce2a2199e6c50a [file] [log] [blame]
# top level project rules for the MSM8952 project
#
LOCAL_DIR := $(GET_LOCAL_DIR)
TARGET := msm8952
MODULES += app/aboot
ifeq ($(TARGET_BUILD_VARIANT),user)
DEBUG := 0
else
DEBUG := 1
endif
EMMC_BOOT := 1
ifeq ($(ENABLE_DISPLAY),1)
DEFINES += ENABLE_DISPLAY=1
DEFINES += DISPLAY_SPLASH_SCREEN=1
endif
ENABLE_SECAPP_LOADER := 1
ENABLE_RPMB_SUPPORT := 1
ifeq ($(VERIFIED_BOOT),1)
ENABLE_MDTP_SUPPORT := 1
#enable fbcon display menu
ifneq (,$(findstring DISPLAY_SPLASH_SCREEN,$(DEFINES)))
ENABLE_FBCON_DISPLAY_MSG := 1
else
ENABLE_FBCON_DISPLAY_MSG := 0
endif #DISPLAY_SPLASH_SCREEN END
endif #VERIFIED_BOOT
ifeq ($(VERIFIED_BOOT_2),1)
ifneq (,$(findstring DISPLAY_SPLASH_SCREEN,$(DEFINES)))
#enable fbcon display menu
ENABLE_FBCON_DISPLAY_MSG := 1
endif
endif
#Enable below flag to compile cmnlib64
DEFINES += ENABLE_CMNLIB64_LOADING=1
ENABLE_SMD_SUPPORT := 1
ENABLE_PWM_SUPPORT := true
#DEFINES += WITH_DEBUG_DCC=1
DEFINES += WITH_DEBUG_LOG_BUF=1
DEFINES += WITH_DEBUG_UART=1
#DEFINES += WITH_DEBUG_FBCON=1
DEFINES += DEVICE_TREE=1
#DEFINES += MMC_BOOT_BAM=1
DEFINES += CRYPTO_BAM=1
DEFINES += SPMI_CORE_V2=1
DEFINES += ABOOT_IGNORE_BOOT_HEADER_ADDRS=1
DEFINES += TARGET_MAX_WLED_STRINGS=2
DEFINES += BAM_V170=1
#Enable the feature of long press power on
DEFINES += LONG_PRESS_POWER_ON=1
ifeq ($(ENABLE_RPMB_SUPPORT),1)
DEFINES += USE_RPMB_FOR_DEVINFO=1
endif
#Disable thumb mode
ENABLE_THUMB := false
ENABLE_SDHCI_SUPPORT := 1
ifeq ($(ENABLE_SDHCI_SUPPORT),1)
DEFINES += MMC_SDHCI_SUPPORT=1
endif
ifeq ($(ENABLE_FBCON_DISPLAY_MSG),1)
DEFINES += FBCON_DISPLAY_MSG=1
endif
#enable power on vibrator feature
ENABLE_HAP_VIB_SUPPORT := true
ifeq ($(EMMC_BOOT),1)
DEFINES += _EMMC_BOOT=1
endif
ifeq ($(ENABLE_PON_VIB_SUPPORT),true)
DEFINES += PON_VIB_SUPPORT=1
endif
ifeq ($(ENABLE_HAP_VIB_SUPPORT),true)
DEFINES += PON_VIB_SUPPORT=1
endif
ifeq ($(ENABLE_SMD_SUPPORT),1)
DEFINES += SMD_SUPPORT=1
endif
#Enable Weak battery charging feature
ENABLE_WEAK_BATT_CHRG_SUPPORT := 1
ifeq ($(ENABLE_WEAK_BATT_CHRG_SUPPORT),1)
DEFINES += ENABLE_WBC=1
DEFINES += LK_BATT_VOLT_THRESHOLD=3400000
endif
ifeq ($(ENABLE_MDTP_SUPPORT),1)
DEFINES += MDTP_SUPPORT=1
endif
#Disable the dload mode
DEFINES += DISABLE_DLOAD_MODE=0
ENABLE_WDOG_SUPPORT := 0
ifeq ($(ENABLE_WDOG_SUPPORT),1)
DEFINES += WDOG_SUPPORT=1
endif
ifeq ($(APPEND_CMDLINE),1)
DEFINES += _APPEND_CMDLINE=1
endif
#SCM call before entering DLOAD mode
DEFINES += PLATFORM_USE_SCM_DLOAD=1
CFLAGS += -Werror
#enable user force reset feature
DEFINES += USER_FORCE_RESET_SUPPORT=1
DEFINES += USE_TARGET_HS200_DELAY=1
#enable battery voltage check
DEFINES += CHECK_BAT_VOLTAGE=1
#Use PON register for reboot reason
ENABLE_REBOOT_MODULE := 1
DEFINES += USE_PON_REBOOT_REG=1