platform/msm_shared/mdp3.c

/* Copyright (c) 2011-2015, 2017, The Linux Foundation. All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are
 * met:
 *     * Redistributions of source code must retain the above copyright
 *       notice, this list of conditions and the following disclaimer.
 *     * Redistributions in binary form must reproduce the above
 *       copyright notice, this list of conditions and the following
 *       disclaimer in the documentation and/or other materials provided
 *       with the distribution.
 *     * Neither the name of The Linux Foundation, Inc. nor the names of its
 *       contributors may be used to endorse or promote products derived
 *       from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
 * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
 * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
 * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
 * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 */
#include <mdp3.h>
#include <debug.h>
#include <reg.h>
#include <msm_panel.h>
#include <err.h>
#include <target/display.h>
#include <platform/timer.h>
#include <platform/iomap.h>

#define BIT(bit) (1 << (bit))
static int mdp_rev;

/**
 * mdp3_get_panic_lut_cfg() - calculate panic and robust lut mask
 * @panel_width: Panel width
 *
 * DMA buffer has 16 fill levels. Which needs to configured as safe
 * and panic levels based on panel resolutions.
 * No. of fill levels used = ((panel active width * 8) / 512).
 * Roundoff the use fill levels if needed.
 * half of the total fill levels used will be treated as panic levels.
 * Roundoff panic levels if total used fill levels are odd.
 *
 * Sample calculation for 720p display:
 * Fill levels used = (720 * 8) / 512 = 12.5 after round off 13.
 * panic levels = 13 / 2 = 6.5 after roundoff 7.
 * Panic mask = 0x3FFF  (2 bits per level)
 * Robust mask = 0xFF80 (1 bit per level)
 */
unsigned long long mdp3_get_panic_lut_cfg(int panel_width)
{
	unsigned int fill_levels = (((panel_width * 8) / 512) + 1);
	unsigned int panic_mask = 0;
	unsigned int robust_mask = 0;
	int i = 0;
	unsigned long long panic_config = 0;
	int panic_levels = 0;

	panic_levels = fill_levels/2;
	if (fill_levels % 2)
		panic_levels++;
	for (i = 0; i < panic_levels; i++) {
		panic_mask |= (BIT((i * 2) + 1) | BIT(i * 2));
		robust_mask |= BIT(i);
	}
	panic_config = (~robust_mask);
	panic_config = panic_config << 32;
	panic_config |= panic_mask;
	return panic_config;
}

int mdp_dsi_video_config(struct msm_panel_info *pinfo,
		struct fbcon_config *fb)
{
	unsigned long hsync_period;
	unsigned long vsync_period;
	unsigned long vsync_period_intmd;
	struct lcdc_panel_info *lcdc = NULL;
	int ystride = 3;
	int mdp_rev = mdp_get_revision();
	unsigned long long panic_config = mdp3_get_panic_lut_cfg(pinfo->xres);

	if (pinfo == NULL)
		return ERR_INVALID_ARGS;

	lcdc =  &(pinfo->lcdc);
	if (lcdc == NULL)
		return ERR_INVALID_ARGS;

	dprintf(SPEW, "MDP3.0.3 for DSI Video Mode\n");

	hsync_period = pinfo->xres + lcdc->h_front_porch + \
			lcdc->h_back_porch + 1;
	vsync_period_intmd = pinfo->yres + lcdc->v_front_porch + \
				lcdc->v_back_porch + 1;
	if (mdp_rev == MDP_REV_304 || mdp_rev == MDP_REV_305) {
		hsync_period += lcdc->h_pulse_width - 1;
		vsync_period_intmd += lcdc->v_pulse_width - 1;
	}
	vsync_period = vsync_period_intmd * hsync_period;

	/* Program QOS remapper settings */
	writel(0x1A9, MDP_DMA_P_QOS_REMAPPER);
	writel(0x0, MDP_DMA_P_WATERMARK_0);
	writel(0x0, MDP_DMA_P_WATERMARK_1);
	writel(0x0, MDP_DMA_P_WATERMARK_2);

	writel((panic_config & 0xFFFF), MDP_PANIC_LUT0);
	writel(((panic_config >> 16) & 0xFFFF) , MDP_PANIC_LUT1);
	writel(((panic_config >> 32) & 0xFFFF), MDP_ROBUST_LUT);
	writel(0x1, MDP_PANIC_ROBUST_CTRL);
	dprintf(INFO, "Panic Lut0 %x Lut1 %x Robest %x\n",
		(panic_config & 0xFFFF), ((panic_config >> 16) & 0xFFFF),
		((panic_config >> 32) & 0xFFFF));
	// ------------- programming MDP_DMA_P_CONFIG ---------------------
	writel(0x1800bf, MDP_DMA_P_CONFIG);	// rgb888

	writel(0x00000000, MDP_DMA_P_OUT_XY);
	writel(pinfo->yres << 16 | pinfo->xres, MDP_DMA_P_SIZE);
	writel((uint32_t)fb->base, MDP_DMA_P_BUF_ADDR);
	writel(pinfo->xres * ystride, MDP_DMA_P_BUF_Y_STRIDE);
	writel(hsync_period << 16 | lcdc->h_pulse_width, \
			MDP_DSI_VIDEO_HSYNC_CTL);
	writel(vsync_period, MDP_DSI_VIDEO_VSYNC_PERIOD);
	writel(lcdc->v_pulse_width * hsync_period, \
			MDP_DSI_VIDEO_VSYNC_PULSE_WIDTH);
	if (mdp_rev == MDP_REV_304 || mdp_rev == MDP_REV_305) {
		writel((pinfo->xres + lcdc->h_back_porch + \
			lcdc->h_pulse_width - 1) << 16 | \
			lcdc->h_back_porch + lcdc->h_pulse_width, \
			MDP_DSI_VIDEO_DISPLAY_HCTL);
		writel((lcdc->v_back_porch + lcdc->v_pulse_width) \
			* hsync_period, MDP_DSI_VIDEO_DISPLAY_V_START);
		writel(vsync_period - lcdc->v_front_porch * hsync_period - 1,
	       MDP_DSI_VIDEO_DISPLAY_V_END);
	} else {
		writel((pinfo->xres + lcdc->h_back_porch - 1) << 16 | \
			lcdc->h_back_porch, MDP_DSI_VIDEO_DISPLAY_HCTL);
		writel(lcdc->v_back_porch * hsync_period, \
			MDP_DSI_VIDEO_DISPLAY_V_START);
		writel((pinfo->yres + lcdc->v_back_porch) * hsync_period,
	       MDP_DSI_VIDEO_DISPLAY_V_END);
	}
	writel(0x00ABCDEF, MDP_DSI_VIDEO_BORDER_CLR);
	writel(0x00000000, MDP_DSI_VIDEO_HSYNC_SKEW);
	writel(0x00000000, MDP_DSI_VIDEO_CTL_POLARITY);
	// end of cmd mdp

	return 0;
}

int mdp_dsi_cmd_config(struct msm_panel_info *pinfo,
                struct fbcon_config *fb)
{
	int ret = 0;
	unsigned short pack_pattern = 0x21;
	unsigned char ystride = 3;
	unsigned int sync_cfg;
	unsigned long long panic_config = 0;
	const uint32_t vsync_hz = 19200000; /* Vsync Clock 19.2 HMz */
	/* Auto refresh fps = Panel fps / frame num */
	/* Auto refresh frame num = 60/10 = 6fps */
	const uint32_t autorefresh_framenum = 10;

	if (pinfo == NULL)
		return ERR_INVALID_ARGS;

	/* Program QOS remapper settings */
	writel(0x1A9, MDP_DMA_P_QOS_REMAPPER);
	writel(0x0, MDP_DMA_P_WATERMARK_0);
	writel(0x0, MDP_DMA_P_WATERMARK_1);
	writel(0x0, MDP_DMA_P_WATERMARK_2);

	panic_config = mdp3_get_panic_lut_cfg(pinfo->xres);
	writel((panic_config & 0xFFFF), MDP_PANIC_LUT0);
	writel(((panic_config >> 16) & 0xFFFF) , MDP_PANIC_LUT1);
	writel(((panic_config >> 32) & 0xFFFF), MDP_ROBUST_LUT);
	writel(0x1, MDP_PANIC_ROBUST_CTRL);
	dprintf(INFO, "Panic Lut0 %x Lut1 %x Robest %x\n",
		(panic_config & 0xFFFF), ((panic_config >> 16) & 0xFFFF),
		((panic_config >> 32) & 0xFFFF));

	writel(0x03ffffff, MDP_INTR_ENABLE);

	// ------------- programming MDP_DMA_P_CONFIG ---------------------
	writel(pack_pattern << 8 | 0x3f | (0 << 25)| (1 << 19) | (1 << 7) ,
		MDP_DMA_P_CONFIG);  /* rgb888 */
	writel(0x00000000, MDP_DMA_P_OUT_XY);
	writel(pinfo->yres << 16 | pinfo->xres, MDP_DMA_P_SIZE);
	writel((uint32_t)fb->base, MDP_DMA_P_BUF_ADDR);

	writel(pinfo->xres * ystride, MDP_DMA_P_BUF_Y_STRIDE);

	writel(0x10, MDP_DSI_CMD_MODE_ID_MAP);
	writel(0x11, MDP_DSI_CMD_MODE_TRIGGER_EN);
	/* Enable Auto refresh */
	sync_cfg = (pinfo->yres - 1) << 21;
	sync_cfg |= BIT(19);

	sync_cfg |= vsync_hz / (pinfo->yres * 60);
	writel(sync_cfg, MDP_SYNC_CONFIG_0);
	writel((BIT(28) | autorefresh_framenum),
		MDP_AUTOREFRESH_CONFIG_P);
	mdelay(10);

	return ret;
}

void mdp_disable(void)
{
	if (!target_cont_splash_screen())
		writel(0x00000000, MDP_DSI_VIDEO_EN);
}

int mdp_dsi_video_off(void)
{
	if (!target_cont_splash_screen()) {
		mdp_disable();
		mdelay(60);
	}
	writel(0x00000000, MDP_INTR_ENABLE);
	writel(0x01ffffff, MDP_INTR_CLEAR);
	return NO_ERROR;
}

int mdp_dsi_cmd_off(void)
{
	if (!target_cont_splash_screen()) {
		mdp_dma_off();
		/*
		 * Allow sometime for the DMA channel to
		 * stop the data transfer
		 */
		mdelay(10);
	}
	/* Disable Auto refresh */
	if (readl(MDP_AUTOREFRESH_CONFIG_P))
		writel(0, MDP_AUTOREFRESH_CONFIG_P);
	writel(0x00000000, MDP_INTR_ENABLE);
	writel(0x01ffffff, MDP_INTR_CLEAR);
	return NO_ERROR;
}

void mdp_set_revision(int rev)
{
	mdp_rev = rev;
}

int mdp_get_revision(void)
{
	return mdp_rev;
}

int mdp_dsi_video_on(struct msm_panel_info *pinfo)
{
	int ret = 0;

	writel(0x00000001, MDP_DSI_VIDEO_EN);

	return ret;
}

int mdp_dma_on(struct msm_panel_info *pinfo)
{
	int ret = 0;
	mdelay(100);
	writel(0x00000001, MDP_DMA_P_START);

	return ret;
}

int mdp_dma_off()
{
	int ret = 0;

	if (!target_cont_splash_screen())
		writel(0x00000000, MDP_DMA_P_START);

	return ret;
}

int mdp_edp_config(struct msm_panel_info *pinfo, struct fbcon_config *fb)
{
	return NO_ERROR;
}

int mdp_edp_on(struct msm_panel_info *pinfo)
{
	return NO_ERROR;
}

int mdp_edp_off(void)
{
	return NO_ERROR;
}

int mdss_hdmi_config(struct msm_panel_info *pinfo, struct fbcon_config *fb)
{
	return NO_ERROR;
}

int mdss_hdmi_on(struct msm_panel_info *pinfo)
{
	return NO_ERROR;
}

int mdss_hdmi_off(void)
{
	return NO_ERROR;
}