blob: 1ccc22735765daa78b9838c60b0358a541855a45 [file] [log] [blame]
vijay kumarca1672a2015-04-09 16:45:40 +05301/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
2 *
3 * Redistribution and use in source and binary forms, with or without
4 * modification, are permitted provided that the following conditions are
5 * met:
6 * * Redistributions of source code must retain the above copyright
7 * notice, this list of conditions and the following disclaimer.
8 * * Redistributions in binary form must reproduce the above
9 * copyright notice, this list of conditions and the following
10 * disclaimer in the documentation and/or other materials provided
11 * with the distribution.
12 * * Neither the name of The Linux Foundation nor the names of its
13 * contributors may be used to endorse or promote products derived
14 * from this software without specific prior written permission.
15 *
16 * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
17 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
18 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
19 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
20 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
21 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
22 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
23 * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
24 * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
25 * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
26 * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
27 */
28
29#include <debug.h>
30#include <platform/iomap.h>
31#include <reg.h>
32#include <target.h>
33#include <platform.h>
34#include <uart_dm.h>
35#include <platform/gpio.h>
36#include <lib/ptable.h>
37#include <qpic_nand.h>
38#include <dev/keys.h>
39#include <spmi_v2.h>
40#include <pm8x41.h>
41#include <board.h>
42#include <baseband.h>
43#include <hsusb.h>
44#include <scm.h>
45#include <platform/gpio.h>
46#include <platform/gpio.h>
47#include <platform/irqs.h>
48#include <platform/clock.h>
49#include <crypto5_wrapper.h>
50#include <partition_parser.h>
51#include <stdlib.h>
52
53#if LONG_PRESS_POWER_ON
54#include <shutdown_detect.h>
55#endif
56
57#define FASTBOOT_MODE 0x77665500
58#define PON_SOFT_RB_SPARE 0x88F
59
60extern void smem_ptable_init(void);
61extern void smem_add_modem_partitions(struct ptable *flash_ptable);
62
63static struct ptable flash_ptable;
64
65/* PMIC config data */
66#define PMIC_ARB_CHANNEL_NUM 0
67#define PMIC_ARB_OWNER_ID 0
68
69/* NANDc BAM pipe numbers */
70#define DATA_CONSUMER_PIPE 0
71#define DATA_PRODUCER_PIPE 1
72#define CMD_PIPE 2
73
74/* NANDc BAM pipe groups */
75#define DATA_PRODUCER_PIPE_GRP 0
76#define DATA_CONSUMER_PIPE_GRP 0
77#define CMD_PIPE_GRP 1
78
79/* NANDc EE */
80#define QPIC_NAND_EE 0
81
82/* NANDc max desc length. */
83#define QPIC_NAND_MAX_DESC_LEN 0x7FFF
84
85#define LAST_NAND_PTN_LEN_PATTERN 0xFFFFFFFF
vijay kumarfc07e142015-08-31 16:46:41 +053086#define UBI_CMDLINE " rootfstype=ubifs rootflags=bulk_read"
vijay kumarca1672a2015-04-09 16:45:40 +053087
88struct qpic_nand_init_config config;
89
90void update_ptable_names(void)
91{
92 uint32_t ptn_index;
93 struct ptentry *ptentry_ptr = flash_ptable.parts;
94 struct ptentry *boot_ptn;
95 unsigned i;
96 uint32_t len;
97
98 /* Change all names to lower case. */
99 for (ptn_index = 0; ptn_index != (uint32_t)flash_ptable.count; ptn_index++)
100 {
101 len = strlen(ptentry_ptr[ptn_index].name);
102 for (i = 0; i < len; i++)
103 {
104 if (isupper(ptentry_ptr[ptn_index].name[i]))
105 {
106 ptentry_ptr[ptn_index].name[i] = tolower(ptentry_ptr[ptn_index].name[i]);
107 }
108 }
109 /* SBL fills in the last partition length as 0xFFFFFFFF.
110 * Update the length field based on the number of blocks on the flash.*/
111 if ((uint32_t)(ptentry_ptr[ptn_index].length) == LAST_NAND_PTN_LEN_PATTERN)
112 {
113 ptentry_ptr[ptn_index].length = flash_num_blocks() - ptentry_ptr[ptn_index].start;
114 }
115 }
116}
117
118void target_early_init(void)
119{
120#if WITH_DEBUG_UART
121 uart_dm_init(1, 0, BLSP1_UART1_BASE);
122#endif
123}
124
125/* Configure PMIC and Drop PS_HOLD for shutdown */
126void shutdown_device()
127{
128 dprintf(CRITICAL, "Going down for shutdown.\n");
129
130 /* Configure PMIC for shutdown */
131 pm8x41_reset_configure(PON_PSHOLD_SHUTDOWN);
132
133 /* Drop PS_HOLD for MSM */
134 writel(0x00, MPM2_MPM_PS_HOLD);
135
136 mdelay(5000);
137
138 dprintf(CRITICAL, "shutdown failed\n");
139
140 ASSERT(0);
141}
142
143
144void target_init(void)
145{
146 uint32_t base_addr;
147 uint8_t slot;
148
149 dprintf(INFO, "target_init()\n");
150
151 spmi_init(PMIC_ARB_CHANNEL_NUM, PMIC_ARB_OWNER_ID);
152
153 config.pipes.read_pipe = DATA_PRODUCER_PIPE;
154 config.pipes.write_pipe = DATA_CONSUMER_PIPE;
155 config.pipes.cmd_pipe = CMD_PIPE;
156
157 config.pipes.read_pipe_grp = DATA_PRODUCER_PIPE_GRP;
158 config.pipes.write_pipe_grp = DATA_CONSUMER_PIPE_GRP;
159 config.pipes.cmd_pipe_grp = CMD_PIPE_GRP;
160
161 config.bam_base = MSM_NAND_BAM_BASE;
162 config.nand_base = MSM_NAND_BASE;
163 config.ee = QPIC_NAND_EE;
164 config.max_desc_len = QPIC_NAND_MAX_DESC_LEN;
165
166 qpic_nand_init(&config);
167
168 ptable_init(&flash_ptable);
vijay kumarec490942015-07-23 12:43:54 +0530169 smem_ptable_init();
170 smem_add_modem_partitions(&flash_ptable);
vijay kumarca1672a2015-04-09 16:45:40 +0530171
172 update_ptable_names();
173 flash_set_ptable(&flash_ptable);
174}
175
176/* Identify the current target */
177void target_detect(struct board_data *board)
178{
179 /* This property is filled as part of board.c */
180}
181
182unsigned board_machtype(void)
183{
184}
185
186/* Identify the baseband being used */
187void target_baseband_detect(struct board_data *board)
188{
189 uint32_t platform = board->platform;
190
191 switch(platform)
192 {
193 case MDMFERMIUM:
194 board->baseband = BASEBAND_MDM;
195 break;
196 default:
197 dprintf(CRITICAL, "Platform type: %u is not supported\n", platform);
198 ASSERT(0);
199 };
200}
201
202unsigned check_reboot_mode(void)
203{
204 uint32_t restart_reason = 0;
205
206 /* Read reboot reason and scrub it */
207 restart_reason = readl(RESTART_REASON_ADDR);
208 writel(0x00, RESTART_REASON_ADDR);
209
210 return restart_reason;
211}
212
vijay kumarfc07e142015-08-31 16:46:41 +0530213int get_target_boot_params(const char *cmdline, const char *part, char **buf)
vijay kumarca1672a2015-04-09 16:45:40 +0530214{
215 struct ptable *ptable;
216 int system_ptn_index = -1;
vijay kumarfc07e142015-08-31 16:46:41 +0530217 uint32_t buflen = strlen(UBI_CMDLINE) + strlen(" root=ubi0:rootfs ubi.mtd=") + sizeof(int) + 1; /* 1 byte for null character*/
218
219 *buf = (char *)malloc(buflen);
220 if(!(*buf)) {
221 dprintf(CRITICAL,"Unable to allocate memory for boot params\n");
222 return -1;
223 }
vijay kumarca1672a2015-04-09 16:45:40 +0530224
225 ptable = flash_get_ptable();
226 if (!ptable) {
227 dprintf(CRITICAL,"WARN: Cannot get flash partition table\n");
vijay kumarfc07e142015-08-31 16:46:41 +0530228 free(*buf);
vijay kumarca1672a2015-04-09 16:45:40 +0530229 return -1;
230 }
231
232 system_ptn_index = ptable_get_index(ptable, part);
233 if (system_ptn_index < 0) {
234 dprintf(CRITICAL,"WARN: Cannot get partition index for %s\n", part);
vijay kumarfc07e142015-08-31 16:46:41 +0530235 free(*buf);
vijay kumarca1672a2015-04-09 16:45:40 +0530236 return -1;
237 }
vijay kumarfc07e142015-08-31 16:46:41 +0530238 /* Adding command line parameters according to target boot type */
239 snprintf(*buf, buflen, UBI_CMDLINE);
240
vijay kumarca1672a2015-04-09 16:45:40 +0530241 /*check if cmdline contains "root=" at the beginning of buffer or
242 * " root=" in the middle of buffer.
243 */
244 if (((!strncmp(cmdline, "root=", strlen("root="))) ||
245 (strstr(cmdline, " root="))))
246 dprintf(DEBUG, "DEBUG: cmdline has root=\n");
247 else
vijay kumarfc07e142015-08-31 16:46:41 +0530248 snprintf(*buf+strlen(*buf), buflen, " root=ubi0:rootfs ubi.mtd=%d", system_ptn_index);
249 /*in success case buf will be freed in the calling function of this*/
vijay kumarca1672a2015-04-09 16:45:40 +0530250 return 0;
251}
252
253void target_usb_init(void)
254{
255 uint32_t val;
256
257 /* Select and enable external configuration with USB PHY */
vijay kumarec490942015-07-23 12:43:54 +0530258 ulpi_write(ULPI_MISC_A_VBUSVLDEXTSEL | ULPI_MISC_A_VBUSVLDEXT, ULPI_MISC_A_SET);
vijay kumarca1672a2015-04-09 16:45:40 +0530259
260 /* Enable sess_vld */
261 val = readl(USB_GENCONFIG_2) | GEN2_SESS_VLD_CTRL_EN;
262 writel(val, USB_GENCONFIG_2);
263
264 /* Enable external vbus configuration in the LINK */
265 val = readl(USB_USBCMD);
266 val |= SESS_VLD_CTRL;
267 writel(val, USB_USBCMD);
268}
269
270void target_uninit(void)
271{
272}
273
274void reboot_device(unsigned reboot_reason)
275{
276 /* Write the reboot reason */
277 writel(reboot_reason, RESTART_REASON_ADDR);
278
279 /* Configure PMIC for warm reset */
280 /* PM 8019 v1 aligns with PM8941 v2.
281 * This call should be based on the pmic version
282 * when PM8019 v2 is available.
283 */
284 pm8x41_v2_reset_configure(PON_PSHOLD_WARM_RESET);
285
286 /* Drop PS_HOLD for MSM */
287 writel(0x00, MPM2_MPM_PS_HOLD);
288
289 mdelay(5000);
290
291 dprintf(CRITICAL, "Rebooting failed\n");
292 return;
293}