Merge branch '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-queue

Jeff Kirsher says:

====================
Intel Wired LAN Driver Fixes 2017-11-21

This series contains fixes for igb/vf, ixgbe/vf, i40e/vf and fm10k.

Jake fixes a regression issue with older firmware, where we were using
the NVM lock to synchronize NVM reads for all devices and firmware
versions, yet this caused issues with older firmware prior to version
1.5.  Fixed this by only grabbing the lock for newer devices and firmware
version 1.5 or newer.

Zijie Pan fixes the calculation of the i40e VF MAC addresses, where it was
possible to increment to the next MAC entry without calling
i40e_add_mac_filter().

Amritha removes the upper limit of 64 queues on a channel VSI since the
upper bound is determined by the VSI's num_queue_pairs.

Filip fixes an issue during FLR resets, where should have been checking
for upcoming core reset and if so, just return with I40E_ERR_NOT_READY.

Alan fixes the notifying clients of l2 parameters by copying the
parameters to the client instance struct and re-organizes the priority
in which the client tasks fire so that if the flag for notifying l2
params is set, it will trigger before the client open task.  Also fixed
the promiscuous settings after reset for all the VSI's.

Brian King from IBM fixes an issue seen on Power systems which would
result in skb list corruption and eventual kernel oops.  Brian
provides the same fix for nearly all our drivers, to replace the
read_barrier_depends with smp_rmb() to ensure loads are ordered with
respect to the load of tx_buffer->next_to_watch.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_main.c b/drivers/net/ethernet/intel/fm10k/fm10k_main.c
index dbd6931..538b42d 100644
--- a/drivers/net/ethernet/intel/fm10k/fm10k_main.c
+++ b/drivers/net/ethernet/intel/fm10k/fm10k_main.c
@@ -1231,7 +1231,7 @@
 			break;
 
 		/* prevent any other reads prior to eop_desc */
-		read_barrier_depends();
+		smp_rmb();
 
 		/* if DD is not set pending work has not been completed */
 		if (!(eop_desc->flags & FM10K_TXD_FLAG_DONE))
diff --git a/drivers/net/ethernet/intel/i40e/i40e.h b/drivers/net/ethernet/intel/i40e/i40e.h
index 5829715..e019baa 100644
--- a/drivers/net/ethernet/intel/i40e/i40e.h
+++ b/drivers/net/ethernet/intel/i40e/i40e.h
@@ -90,7 +90,6 @@
 #define I40E_AQ_LEN			256
 #define I40E_AQ_WORK_LIMIT		66 /* max number of VFs + a little */
 #define I40E_MAX_USER_PRIORITY		8
-#define I40E_MAX_QUEUES_PER_CH		64
 #define I40E_DEFAULT_TRAFFIC_CLASS	BIT(0)
 #define I40E_DEFAULT_MSG_ENABLE		4
 #define I40E_QUEUE_WAIT_RETRY_LIMIT	10
diff --git a/drivers/net/ethernet/intel/i40e/i40e_adminq.c b/drivers/net/ethernet/intel/i40e/i40e_adminq.c
index 9dcb2a9..9af7425 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_adminq.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_adminq.c
@@ -613,6 +613,12 @@
 		hw->flags |= I40E_HW_FLAG_AQ_PHY_ACCESS_CAPABLE;
 	}
 
+	/* Newer versions of firmware require lock when reading the NVM */
+	if (hw->aq.api_maj_ver > 1 ||
+	    (hw->aq.api_maj_ver == 1 &&
+	     hw->aq.api_min_ver >= 5))
+		hw->flags |= I40E_HW_FLAG_NVM_READ_REQUIRES_LOCK;
+
 	/* The ability to RX (not drop) 802.1ad frames was added in API 1.7 */
 	if (hw->aq.api_maj_ver > 1 ||
 	    (hw->aq.api_maj_ver == 1 &&
diff --git a/drivers/net/ethernet/intel/i40e/i40e_common.c b/drivers/net/ethernet/intel/i40e/i40e_common.c
index 0203665..095965f 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_common.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_common.c
@@ -948,7 +948,8 @@
 		hw->pf_id = (u8)(func_rid & 0x7);
 
 	if (hw->mac.type == I40E_MAC_X722)
-		hw->flags |= I40E_HW_FLAG_AQ_SRCTL_ACCESS_ENABLE;
+		hw->flags |= I40E_HW_FLAG_AQ_SRCTL_ACCESS_ENABLE |
+			     I40E_HW_FLAG_NVM_READ_REQUIRES_LOCK;
 
 	status = i40e_init_nvm(hw);
 	return status;
@@ -1268,6 +1269,7 @@
 	 * we don't need to do the PF Reset
 	 */
 	if (!cnt) {
+		u32 reg2 = 0;
 		if (hw->revision_id == 0)
 			cnt = I40E_PF_RESET_WAIT_COUNT_A0;
 		else
@@ -1279,6 +1281,12 @@
 			reg = rd32(hw, I40E_PFGEN_CTRL);
 			if (!(reg & I40E_PFGEN_CTRL_PFSWR_MASK))
 				break;
+			reg2 = rd32(hw, I40E_GLGEN_RSTAT);
+			if (reg2 & I40E_GLGEN_RSTAT_DEVSTATE_MASK) {
+				hw_dbg(hw, "Core reset upcoming. Skipping PF reset request.\n");
+				hw_dbg(hw, "I40E_GLGEN_RSTAT = 0x%x\n", reg2);
+				return I40E_ERR_NOT_READY;
+			}
 			usleep_range(1000, 2000);
 		}
 		if (reg & I40E_PFGEN_CTRL_PFSWR_MASK) {
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index 4a964d6..4c08cc8 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -2167,6 +2167,73 @@
 }
 
 /**
+ * i40e_set_promiscuous - set promiscuous mode
+ * @pf: board private structure
+ * @promisc: promisc on or off
+ *
+ * There are different ways of setting promiscuous mode on a PF depending on
+ * what state/environment we're in.  This identifies and sets it appropriately.
+ * Returns 0 on success.
+ **/
+static int i40e_set_promiscuous(struct i40e_pf *pf, bool promisc)
+{
+	struct i40e_vsi *vsi = pf->vsi[pf->lan_vsi];
+	struct i40e_hw *hw = &pf->hw;
+	i40e_status aq_ret;
+
+	if (vsi->type == I40E_VSI_MAIN &&
+	    pf->lan_veb != I40E_NO_VEB &&
+	    !(pf->flags & I40E_FLAG_MFP_ENABLED)) {
+		/* set defport ON for Main VSI instead of true promisc
+		 * this way we will get all unicast/multicast and VLAN
+		 * promisc behavior but will not get VF or VMDq traffic
+		 * replicated on the Main VSI.
+		 */
+		if (promisc)
+			aq_ret = i40e_aq_set_default_vsi(hw,
+							 vsi->seid,
+							 NULL);
+		else
+			aq_ret = i40e_aq_clear_default_vsi(hw,
+							   vsi->seid,
+							   NULL);
+		if (aq_ret) {
+			dev_info(&pf->pdev->dev,
+				 "Set default VSI failed, err %s, aq_err %s\n",
+				 i40e_stat_str(hw, aq_ret),
+				 i40e_aq_str(hw, hw->aq.asq_last_status));
+		}
+	} else {
+		aq_ret = i40e_aq_set_vsi_unicast_promiscuous(
+						  hw,
+						  vsi->seid,
+						  promisc, NULL,
+						  true);
+		if (aq_ret) {
+			dev_info(&pf->pdev->dev,
+				 "set unicast promisc failed, err %s, aq_err %s\n",
+				 i40e_stat_str(hw, aq_ret),
+				 i40e_aq_str(hw, hw->aq.asq_last_status));
+		}
+		aq_ret = i40e_aq_set_vsi_multicast_promiscuous(
+						  hw,
+						  vsi->seid,
+						  promisc, NULL);
+		if (aq_ret) {
+			dev_info(&pf->pdev->dev,
+				 "set multicast promisc failed, err %s, aq_err %s\n",
+				 i40e_stat_str(hw, aq_ret),
+				 i40e_aq_str(hw, hw->aq.asq_last_status));
+		}
+	}
+
+	if (!aq_ret)
+		pf->cur_promisc = promisc;
+
+	return aq_ret;
+}
+
+/**
  * i40e_sync_vsi_filters - Update the VSI filter list to the HW
  * @vsi: ptr to the VSI
  *
@@ -2467,81 +2534,16 @@
 		cur_promisc = (!!(vsi->current_netdev_flags & IFF_PROMISC) ||
 			       test_bit(__I40E_VSI_OVERFLOW_PROMISC,
 					vsi->state));
-		if ((vsi->type == I40E_VSI_MAIN) &&
-		    (pf->lan_veb != I40E_NO_VEB) &&
-		    !(pf->flags & I40E_FLAG_MFP_ENABLED)) {
-			/* set defport ON for Main VSI instead of true promisc
-			 * this way we will get all unicast/multicast and VLAN
-			 * promisc behavior but will not get VF or VMDq traffic
-			 * replicated on the Main VSI.
-			 */
-			if (pf->cur_promisc != cur_promisc) {
-				pf->cur_promisc = cur_promisc;
-				if (cur_promisc)
-					aq_ret =
-					      i40e_aq_set_default_vsi(hw,
-								      vsi->seid,
-								      NULL);
-				else
-					aq_ret =
-					    i40e_aq_clear_default_vsi(hw,
-								      vsi->seid,
-								      NULL);
-				if (aq_ret) {
-					retval = i40e_aq_rc_to_posix(aq_ret,
-							hw->aq.asq_last_status);
-					dev_info(&pf->pdev->dev,
-						 "Set default VSI failed on %s, err %s, aq_err %s\n",
-						 vsi_name,
-						 i40e_stat_str(hw, aq_ret),
-						 i40e_aq_str(hw,
-						     hw->aq.asq_last_status));
-				}
-			}
-		} else {
-			aq_ret = i40e_aq_set_vsi_unicast_promiscuous(
-							  hw,
-							  vsi->seid,
-							  cur_promisc, NULL,
-							  true);
-			if (aq_ret) {
-				retval =
-				i40e_aq_rc_to_posix(aq_ret,
-						    hw->aq.asq_last_status);
-				dev_info(&pf->pdev->dev,
-					 "set unicast promisc failed on %s, err %s, aq_err %s\n",
-					 vsi_name,
-					 i40e_stat_str(hw, aq_ret),
-					 i40e_aq_str(hw,
-						     hw->aq.asq_last_status));
-			}
-			aq_ret = i40e_aq_set_vsi_multicast_promiscuous(
-							  hw,
-							  vsi->seid,
-							  cur_promisc, NULL);
-			if (aq_ret) {
-				retval =
-				i40e_aq_rc_to_posix(aq_ret,
-						    hw->aq.asq_last_status);
-				dev_info(&pf->pdev->dev,
-					 "set multicast promisc failed on %s, err %s, aq_err %s\n",
-					 vsi_name,
-					 i40e_stat_str(hw, aq_ret),
-					 i40e_aq_str(hw,
-						     hw->aq.asq_last_status));
-			}
-		}
-		aq_ret = i40e_aq_set_vsi_broadcast(&vsi->back->hw,
-						   vsi->seid,
-						   cur_promisc, NULL);
+		aq_ret = i40e_set_promiscuous(pf, cur_promisc);
 		if (aq_ret) {
 			retval = i40e_aq_rc_to_posix(aq_ret,
-						     pf->hw.aq.asq_last_status);
+						     hw->aq.asq_last_status);
 			dev_info(&pf->pdev->dev,
-				 "set brdcast promisc failed, err %s, aq_err %s\n",
-					 i40e_stat_str(hw, aq_ret),
-					 i40e_aq_str(hw,
-						     hw->aq.asq_last_status));
+				 "Setting promiscuous %s failed on %s, err %s aq_err %s\n",
+				 cur_promisc ? "on" : "off",
+				 vsi_name,
+				 i40e_stat_str(hw, aq_ret),
+				 i40e_aq_str(hw, hw->aq.asq_last_status));
 		}
 	}
 out:
@@ -3964,7 +3966,7 @@
 			break;
 
 		/* prevent any other reads prior to eop_desc */
-		read_barrier_depends();
+		smp_rmb();
 
 		/* if the descriptor isn't done, no work yet to do */
 		if (!(eop_desc->cmd_type_offset_bsz &
@@ -5629,14 +5631,6 @@
 		return -EINVAL;
 
 	*reconfig_rss = false;
-
-	if (num_queues > I40E_MAX_QUEUES_PER_CH) {
-		dev_err(&pf->pdev->dev,
-			"Failed to create VMDq VSI. User requested num_queues (%d) > I40E_MAX_QUEUES_PER_VSI (%u)\n",
-			num_queues, I40E_MAX_QUEUES_PER_CH);
-		return -EINVAL;
-	}
-
 	if (vsi->current_rss_size) {
 		if (num_queues > vsi->current_rss_size) {
 			dev_dbg(&pf->pdev->dev,
@@ -9429,6 +9423,15 @@
 	if (!lock_acquired)
 		rtnl_unlock();
 
+	/* Restore promiscuous settings */
+	ret = i40e_set_promiscuous(pf, pf->cur_promisc);
+	if (ret)
+		dev_warn(&pf->pdev->dev,
+			 "Failed to restore promiscuous setting: %s, err %s aq_err %s\n",
+			 pf->cur_promisc ? "on" : "off",
+			 i40e_stat_str(&pf->hw, ret),
+			 i40e_aq_str(&pf->hw, pf->hw.aq.asq_last_status));
+
 	i40e_reset_all_vfs(pf, true);
 
 	/* tell the firmware that we're starting */
diff --git a/drivers/net/ethernet/intel/i40e/i40e_nvm.c b/drivers/net/ethernet/intel/i40e/i40e_nvm.c
index 0ccab0a..7689c2e 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_nvm.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_nvm.c
@@ -328,15 +328,17 @@
 i40e_status i40e_read_nvm_word(struct i40e_hw *hw, u16 offset,
 			       u16 *data)
 {
-	i40e_status ret_code;
+	i40e_status ret_code = 0;
 
-	ret_code = i40e_acquire_nvm(hw, I40E_RESOURCE_READ);
+	if (hw->flags & I40E_HW_FLAG_NVM_READ_REQUIRES_LOCK)
+		ret_code = i40e_acquire_nvm(hw, I40E_RESOURCE_READ);
 	if (ret_code)
 		return ret_code;
 
 	ret_code = __i40e_read_nvm_word(hw, offset, data);
 
-	i40e_release_nvm(hw);
+	if (hw->flags & I40E_HW_FLAG_NVM_READ_REQUIRES_LOCK)
+		i40e_release_nvm(hw);
 
 	return ret_code;
 }
diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
index d6d352a..4566d66 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_txrx.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c
@@ -759,7 +759,7 @@
 			break;
 
 		/* prevent any other reads prior to eop_desc */
-		read_barrier_depends();
+		smp_rmb();
 
 		i40e_trace(clean_tx_irq, tx_ring, tx_desc, tx_buf);
 		/* we have caught up to head, no work left to do */
diff --git a/drivers/net/ethernet/intel/i40e/i40e_type.h b/drivers/net/ethernet/intel/i40e/i40e_type.h
index 00d4833..0e85687 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_type.h
+++ b/drivers/net/ethernet/intel/i40e/i40e_type.h
@@ -629,6 +629,7 @@
 #define I40E_HW_FLAG_AQ_SRCTL_ACCESS_ENABLE BIT_ULL(0)
 #define I40E_HW_FLAG_802_1AD_CAPABLE        BIT_ULL(1)
 #define I40E_HW_FLAG_AQ_PHY_ACCESS_CAPABLE  BIT_ULL(2)
+#define I40E_HW_FLAG_NVM_READ_REQUIRES_LOCK BIT_ULL(3)
 	u64 flags;
 
 	/* Used in set switch config AQ command */
diff --git a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
index f8a794b..a3dc9b9 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c
@@ -2218,18 +2218,19 @@
 		struct i40e_mac_filter *f;
 
 		f = i40e_find_mac(vsi, al->list[i].addr);
-		if (!f)
+		if (!f) {
 			f = i40e_add_mac_filter(vsi, al->list[i].addr);
 
-		if (!f) {
-			dev_err(&pf->pdev->dev,
-				"Unable to add MAC filter %pM for VF %d\n",
-				 al->list[i].addr, vf->vf_id);
-			ret = I40E_ERR_PARAM;
-			spin_unlock_bh(&vsi->mac_filter_hash_lock);
-			goto error_param;
-		} else {
-			vf->num_mac++;
+			if (!f) {
+				dev_err(&pf->pdev->dev,
+					"Unable to add MAC filter %pM for VF %d\n",
+					al->list[i].addr, vf->vf_id);
+				ret = I40E_ERR_PARAM;
+				spin_unlock_bh(&vsi->mac_filter_hash_lock);
+				goto error_param;
+			} else {
+				vf->num_mac++;
+			}
 		}
 	}
 	spin_unlock_bh(&vsi->mac_filter_hash_lock);
diff --git a/drivers/net/ethernet/intel/i40evf/i40e_txrx.c b/drivers/net/ethernet/intel/i40evf/i40e_txrx.c
index fe817e2..50864f9 100644
--- a/drivers/net/ethernet/intel/i40evf/i40e_txrx.c
+++ b/drivers/net/ethernet/intel/i40evf/i40e_txrx.c
@@ -179,7 +179,7 @@
 			break;
 
 		/* prevent any other reads prior to eop_desc */
-		read_barrier_depends();
+		smp_rmb();
 
 		i40e_trace(clean_tx_irq, tx_ring, tx_desc, tx_buf);
 		/* if the descriptor isn't done, no work yet to do */
diff --git a/drivers/net/ethernet/intel/i40evf/i40evf_client.c b/drivers/net/ethernet/intel/i40evf/i40evf_client.c
index d813113..da60ce1 100644
--- a/drivers/net/ethernet/intel/i40evf/i40evf_client.c
+++ b/drivers/net/ethernet/intel/i40evf/i40evf_client.c
@@ -26,6 +26,26 @@
 };
 
 /**
+ * i40evf_client_get_params - retrieve relevant client parameters
+ * @vsi: VSI with parameters
+ * @params: client param struct
+ **/
+static
+void i40evf_client_get_params(struct i40e_vsi *vsi, struct i40e_params *params)
+{
+	int i;
+
+	memset(params, 0, sizeof(struct i40e_params));
+	params->mtu = vsi->netdev->mtu;
+	params->link_up = vsi->back->link_up;
+
+	for (i = 0; i < I40E_MAX_USER_PRIORITY; i++) {
+		params->qos.prio_qos[i].tc = 0;
+		params->qos.prio_qos[i].qs_handle = vsi->qs_handle;
+	}
+}
+
+/**
  * i40evf_notify_client_message - call the client message receive callback
  * @vsi: the VSI associated with this client
  * @msg: message buffer
@@ -66,10 +86,6 @@
 		return;
 
 	cinst = vsi->back->cinst;
-	memset(&params, 0, sizeof(params));
-	params.mtu = vsi->netdev->mtu;
-	params.link_up = vsi->back->link_up;
-	params.qos.prio_qos[0].qs_handle = vsi->qs_handle;
 
 	if (!cinst || !cinst->client || !cinst->client->ops ||
 	    !cinst->client->ops->l2_param_change) {
@@ -77,6 +93,8 @@
 			"Cannot locate client instance l2_param_change function\n");
 		return;
 	}
+	i40evf_client_get_params(vsi, &params);
+	cinst->lan_info.params = params;
 	cinst->client->ops->l2_param_change(&cinst->lan_info, cinst->client,
 					    &params);
 }
@@ -166,9 +184,9 @@
 i40evf_client_add_instance(struct i40evf_adapter *adapter)
 {
 	struct i40e_client_instance *cinst = NULL;
-	struct netdev_hw_addr *mac = NULL;
 	struct i40e_vsi *vsi = &adapter->vsi;
-	int i;
+	struct netdev_hw_addr *mac = NULL;
+	struct i40e_params params;
 
 	if (!vf_registered_client)
 		goto out;
@@ -192,18 +210,14 @@
 	cinst->lan_info.version.major = I40EVF_CLIENT_VERSION_MAJOR;
 	cinst->lan_info.version.minor = I40EVF_CLIENT_VERSION_MINOR;
 	cinst->lan_info.version.build = I40EVF_CLIENT_VERSION_BUILD;
+	i40evf_client_get_params(vsi, &params);
+	cinst->lan_info.params = params;
 	set_bit(__I40E_CLIENT_INSTANCE_NONE, &cinst->state);
 
 	cinst->lan_info.msix_count = adapter->num_iwarp_msix;
 	cinst->lan_info.msix_entries =
 			&adapter->msix_entries[adapter->iwarp_base_vector];
 
-	for (i = 0; i < I40E_MAX_USER_PRIORITY; i++) {
-		cinst->lan_info.params.qos.prio_qos[i].tc = 0;
-		cinst->lan_info.params.qos.prio_qos[i].qs_handle =
-								vsi->qs_handle;
-	}
-
 	mac = list_first_entry(&cinst->lan_info.netdev->dev_addrs.list,
 			       struct netdev_hw_addr, list);
 	if (mac)
diff --git a/drivers/net/ethernet/intel/i40evf/i40evf_main.c b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
index ca2ebdb..7b2a4eb 100644
--- a/drivers/net/ethernet/intel/i40evf/i40evf_main.c
+++ b/drivers/net/ethernet/intel/i40evf/i40evf_main.c
@@ -2110,6 +2110,11 @@
 		adapter->flags &= ~I40EVF_FLAG_SERVICE_CLIENT_REQUESTED;
 		goto out;
 	}
+	if (adapter->flags & I40EVF_FLAG_CLIENT_NEEDS_L2_PARAMS) {
+		i40evf_notify_client_l2_params(&adapter->vsi);
+		adapter->flags &= ~I40EVF_FLAG_CLIENT_NEEDS_L2_PARAMS;
+		goto out;
+	}
 	if (adapter->flags & I40EVF_FLAG_CLIENT_NEEDS_CLOSE) {
 		i40evf_notify_client_close(&adapter->vsi, false);
 		adapter->flags &= ~I40EVF_FLAG_CLIENT_NEEDS_CLOSE;
@@ -2118,11 +2123,6 @@
 	if (adapter->flags & I40EVF_FLAG_CLIENT_NEEDS_OPEN) {
 		i40evf_notify_client_open(&adapter->vsi);
 		adapter->flags &= ~I40EVF_FLAG_CLIENT_NEEDS_OPEN;
-		goto out;
-	}
-	if (adapter->flags & I40EVF_FLAG_CLIENT_NEEDS_L2_PARAMS) {
-		i40evf_notify_client_l2_params(&adapter->vsi);
-		adapter->flags &= ~I40EVF_FLAG_CLIENT_NEEDS_L2_PARAMS;
 	}
 out:
 	clear_bit(__I40EVF_IN_CLIENT_TASK, &adapter->crit_section);
diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index e94d3c2..c208753 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -7317,7 +7317,7 @@
 			break;
 
 		/* prevent any other reads prior to eop_desc */
-		read_barrier_depends();
+		smp_rmb();
 
 		/* if DD is not set pending work has not been completed */
 		if (!(eop_desc->wb.status & cpu_to_le32(E1000_TXD_STAT_DD)))
diff --git a/drivers/net/ethernet/intel/igbvf/netdev.c b/drivers/net/ethernet/intel/igbvf/netdev.c
index 713e8df..4214c15 100644
--- a/drivers/net/ethernet/intel/igbvf/netdev.c
+++ b/drivers/net/ethernet/intel/igbvf/netdev.c
@@ -810,7 +810,7 @@
 			break;
 
 		/* prevent any other reads prior to eop_desc */
-		read_barrier_depends();
+		smp_rmb();
 
 		/* if DD is not set pending work has not been completed */
 		if (!(eop_desc->wb.status & cpu_to_le32(E1000_TXD_STAT_DD)))
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index ca06c3c..62a1891 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -1192,7 +1192,7 @@
 			break;
 
 		/* prevent any other reads prior to eop_desc */
-		read_barrier_depends();
+		smp_rmb();
 
 		/* if DD is not set pending work has not been completed */
 		if (!(eop_desc->wb.status & cpu_to_le32(IXGBE_TXD_STAT_DD)))
diff --git a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
index feed11b..1f4a691 100644
--- a/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
+++ b/drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
@@ -326,7 +326,7 @@
 			break;
 
 		/* prevent any other reads prior to eop_desc */
-		read_barrier_depends();
+		smp_rmb();
 
 		/* if DD is not set pending work has not been completed */
 		if (!(eop_desc->wb.status & cpu_to_le32(IXGBE_TXD_STAT_DD)))