| /* |
| * O2D base Device Tree Source |
| * |
| * Copyright (C) 2012 DENX Software Engineering |
| * Anatolij Gustschin <agust@denx.de> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| */ |
| |
| /include/ "mpc5200b.dtsi" |
| |
| / { |
| model = "ifm,o2d"; |
| compatible = "ifm,o2d"; |
| |
| memory { |
| reg = <0x00000000 0x04000000>; // 64MB |
| }; |
| |
| soc5200@f0000000 { |
| |
| gpio_simple: gpio@b00 { |
| }; |
| |
| timer@600 { // General Purpose Timer |
| #gpio-cells = <2>; |
| gpio-controller; |
| fsl,has-wdt; |
| fsl,wdt-on-boot = <0>; |
| }; |
| |
| timer@610 { |
| #gpio-cells = <2>; |
| gpio-controller; |
| }; |
| |
| timer7: timer@670 { |
| }; |
| |
| rtc@800 { |
| status = "disabled"; |
| }; |
| |
| psc@2000 { // PSC1 |
| compatible = "fsl,mpc5200b-psc-spi","fsl,mpc5200-psc-spi"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| cell-index = <0>; |
| |
| spidev@0 { |
| compatible = "spidev"; |
| spi-max-frequency = <250000>; |
| reg = <0>; |
| }; |
| }; |
| |
| psc@2200 { // PSC2 |
| status = "disabled"; |
| }; |
| |
| psc@2400 { // PSC3 |
| status = "disabled"; |
| }; |
| |
| psc@2600 { // PSC4 |
| compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; |
| }; |
| |
| psc@2800 { // PSC5 |
| compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; |
| }; |
| |
| psc@2c00 { // PSC6 |
| status = "disabled"; |
| }; |
| |
| ethernet@3000 { |
| phy-handle = <&phy0>; |
| }; |
| |
| mdio@3000 { |
| phy0: ethernet-phy@0 { |
| reg = <0>; |
| }; |
| }; |
| |
| sclpc@3c00 { |
| compatible = "fsl,mpc5200-lpbfifo"; |
| reg = <0x3c00 0x60>; |
| interrupts = <3 23 0>; |
| }; |
| }; |
| |
| localbus { |
| ranges = <0 0 0xff000000 0x01000000 |
| 3 0 0xe3000000 0x00100000>; |
| |
| // flash device at LocalPlus Bus CS0 |
| flash@0,0 { |
| compatible = "cfi-flash"; |
| reg = <0 0 0x01000000>; |
| bank-width = <1>; |
| device-width = <2>; |
| #size-cells = <1>; |
| #address-cells = <1>; |
| no-unaligned-direct-access; |
| |
| /* common layout for all machines */ |
| partition@0 { |
| label = "u-boot"; |
| reg = <0x00000000 0x00040000>; |
| read-only; |
| }; |
| partition@40000 { |
| label = "env"; |
| reg = <0x00040000 0x00020000>; |
| read-only; |
| }; |
| }; |
| |
| csi@3,0 { |
| compatible = "ifm,o2d-csi"; |
| reg = <3 0 0x00100000>; |
| ifm,csi-clk-handle = <&timer7>; |
| gpios = <&gpio_simple 23 0 /* imag_capture */ |
| &gpio_simple 26 0 /* imag_reset */ |
| &gpio_simple 29 0>; /* imag_master_en */ |
| |
| interrupts = <1 1 2>; /* IRQ1, edge falling */ |
| |
| ifm,csi-addr-bus-width = <24>; |
| ifm,csi-data-bus-width = <8>; |
| ifm,csi-wait-cycles = <0>; |
| }; |
| }; |
| }; |