drivers/net/wireless/iwlwifi/mvm/time-event.h - kernel/msm-4.19 - Gitiles

 /******************************************************************************
  *
  * This file is provided under a dual BSD/GPLv2 license.  When using or
  * redistributing this file, you may do so under either license.
  *
  * GPL LICENSE SUMMARY
  *
  * Copyright(c) 2012 - 2013 Intel Corporation. All rights reserved.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of version 2 of the GNU General Public License as
  * published by the Free Software Foundation.
  *
  * This program is distributed in the hope that it will be useful, but
  * WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  * General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
  * USA
  *
  * The full GNU General Public License is included in this distribution
  * in the file called COPYING.
  *
  * Contact Information:
  *  Intel Linux Wireless <ilw@linux.intel.com>
  * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
  *
  * BSD LICENSE
  *
  * Copyright(c) 2012 - 2013 Intel Corporation. All rights reserved.
  * All rights reserved.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions
  * are met:
  *
  *  * Redistributions of source code must retain the above copyright
  *    notice, this list of conditions and the following disclaimer.
  *  * Redistributions in binary form must reproduce the above copyright
  *    notice, this list of conditions and the following disclaimer in
  *    the documentation and/or other materials provided with the
  *    distribution.
  *  * Neither the name Intel Corporation nor the names of its
  *    contributors may be used to endorse or promote products derived
  *    from this software without specific prior written permission.
  *
  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
  * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
  * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
  *****************************************************************************/

 #ifndef __time_event_h__
 #define __time_event_h__

 #include "fw-api.h"

 #include "mvm.h"

 /**
  * DOC: Time Events - what is it?
  *
  * Time Events are a fw feature that allows the driver to control the presence
  * of the device on the channel. Since the fw supports multiple channels
  * concurrently, the fw may choose to jump to another channel at any time.
  * In order to make sure that the fw is on a specific channel at a certain time
  * and for a certain duration, the driver needs to issue a time event.
  *
  * The simplest example is for BSS association. The driver issues a time event,
  * waits for it to start, and only then tells mac80211 that we can start the
  * association. This way, we make sure that the association will be done
  * smoothly and won't be interrupted by channel switch decided within the fw.
  */

  /**
  * DOC: The flow against the fw
  *
  * When the driver needs to make sure we are in a certain channel, at a certain
  * time and for a certain duration, it sends a Time Event. The flow against the
  * fw goes like this:
  *	1) Driver sends a TIME_EVENT_CMD to the fw
  *	2) Driver gets the response for that command. This response contains the
  *	   Unique ID (UID) of the event.
  *	3) The fw sends notification when the event starts.
  *
  * Of course the API provides various options that allow to cover parameters
  * of the flow.
  *	What is the duration of the event?
  *	What is the start time of the event?
  *	Is there an end-time for the event?
  *	How much can the event be delayed?
  *	Can the event be split?
  *	If yes what is the maximal number of chunks?
  *	etc...
  */

 /**
  * DOC: Abstraction to the driver
  *
  * In order to simplify the use of time events to the rest of the driver,
  * we abstract the use of time events. This component provides the functions
  * needed by the driver.
  */

 #define IWL_MVM_TE_SESSION_PROTECTION_MAX_TIME_MS 500
 #define IWL_MVM_TE_SESSION_PROTECTION_MIN_TIME_MS 400

 /**
  * iwl_mvm_protect_session - start / extend the session protection.
  * @mvm: the mvm component
  * @vif: the virtual interface for which the session is issued
  * @duration: the duration of the session in TU.
  * @min_duration: will start a new session if the current session will end
  *	in less than min_duration.
  * @max_delay: maximum delay before starting the time event (in TU)
  *
  * This function can be used to start a session protection which means that the
  * fw will stay on the channel for %duration_ms milliseconds. This function
  * will block (sleep) until the session starts. This function can also be used
  * to extend a currently running session.
  * This function is meant to be used for BSS association for example, where we
  * want to make sure that the fw stays on the channel during the association.
  */
 void iwl_mvm_protect_session(struct iwl_mvm *mvm,
 			     struct ieee80211_vif *vif,
 			     u32 duration, u32 min_duration,
 			     u32 max_delay);

 /**
  * iwl_mvm_stop_session_protection - cancel the session protection.
  * @mvm: the mvm component
  * @vif: the virtual interface for which the session is issued
  *
  * This functions cancels the session protection which is an act of good
  * citizenship. If it is not needed any more it should be cancelled because
  * the other bindings wait for the medium during that time.
  * This funtions doesn't sleep.
  */
 void iwl_mvm_stop_session_protection(struct iwl_mvm *mvm,
 				      struct ieee80211_vif *vif);

 /*
  * iwl_mvm_rx_time_event_notif - handles %TIME_EVENT_NOTIFICATION.
  */
 int iwl_mvm_rx_time_event_notif(struct iwl_mvm *mvm,
 				struct iwl_rx_cmd_buffer *rxb,
 				struct iwl_device_cmd *cmd);

 /**
  * iwl_mvm_start_p2p_roc - start remain on channel for p2p device functionlity
  * @mvm: the mvm component
  * @vif: the virtual interface for which the roc is requested. It is assumed
  * that the vif type is NL80211_IFTYPE_P2P_DEVICE
  * @duration: the requested duration in millisecond for the fw to be on the
  * channel that is bound to the vif.
  * @type: the remain on channel request type
  *
  * This function can be used to issue a remain on channel session,
  * which means that the fw will stay in the channel for the request %duration
  * milliseconds. The function is async, meaning that it only issues the ROC
  * request but does not wait for it to start. Once the FW is ready to serve the
  * ROC request, it will issue a notification to the driver that it is on the
  * requested channel. Once the FW completes the ROC request it will issue
  * another notification to the driver.
  */
 int iwl_mvm_start_p2p_roc(struct iwl_mvm *mvm, struct ieee80211_vif *vif,
 			  int duration, enum ieee80211_roc_type type);

 /**
  * iwl_mvm_stop_p2p_roc - stop remain on channel for p2p device functionlity
  * @mvm: the mvm component
  *
  * This function can be used to cancel an ongoing ROC session.
  * The function is async, it will instruct the FW to stop serving the ROC
  * session, but will not wait for the actual stopping of the session.
  */
 void iwl_mvm_stop_p2p_roc(struct iwl_mvm *mvm);

 /**
  * iwl_mvm_remove_time_event - general function to clean up of time event
  * @mvm: the mvm component
  * @vif: the vif to which the time event belongs
  * @te_data: the time event data that corresponds to that time event
  *
  * This function can be used to cancel a time event regardless its type.
  * It is useful for cleaning up time events running before removing an
  * interface.
  */
 void iwl_mvm_remove_time_event(struct iwl_mvm *mvm,
 			       struct iwl_mvm_vif *mvmvif,
 			       struct iwl_mvm_time_event_data *te_data);

 /**
  * iwl_mvm_te_clear_data - remove time event from list
  * @mvm: the mvm component
  * @te_data: the time event data to remove
  *
  * This function is mostly internal, it is made available here only
  * for firmware restart purposes.
  */
 void iwl_mvm_te_clear_data(struct iwl_mvm *mvm,
 			   struct iwl_mvm_time_event_data *te_data);

 void iwl_mvm_roc_done_wk(struct work_struct *wk);

 #endif /* __time_event_h__ */
	/******************************************************************************
	*
	* This file is provided under a dual BSD/GPLv2 license. When using or
	* redistributing this file, you may do so under either license.
	*
	* GPL LICENSE SUMMARY
	*
	* Copyright(c) 2012 - 2013 Intel Corporation. All rights reserved.
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of version 2 of the GNU General Public License as
	* published by the Free Software Foundation.
	*
	* This program is distributed in the hope that it will be useful, but
	* WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
	* General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
	* USA
	*
	* The full GNU General Public License is included in this distribution
	* in the file called COPYING.
	*
	* Contact Information:
	* Intel Linux Wireless <ilw@linux.intel.com>
	* Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
	*
	* BSD LICENSE
	*
	* Copyright(c) 2012 - 2013 Intel Corporation. All rights reserved.
	* All rights reserved.
	*
	* Redistribution and use in source and binary forms, with or without
	* modification, are permitted provided that the following conditions
	* are met:
	*
	* * Redistributions of source code must retain the above copyright
	* notice, this list of conditions and the following disclaimer.
	* * Redistributions in binary form must reproduce the above copyright
	* notice, this list of conditions and the following disclaimer in
	* the documentation and/or other materials provided with the
	* distribution.
	* * Neither the name Intel Corporation nor the names of its
	* contributors may be used to endorse or promote products derived
	* from this software without specific prior written permission.
	*
	* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
	* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
	* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
	* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
	* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
	* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
	* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
	* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
	* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
	* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
	* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
	*
	*****************************************************************************/

	#ifndef __time_event_h__
	#define __time_event_h__

	#include "fw-api.h"

	#include "mvm.h"

	/**
	* DOC: Time Events - what is it?
	*
	* Time Events are a fw feature that allows the driver to control the presence
	* of the device on the channel. Since the fw supports multiple channels
	* concurrently, the fw may choose to jump to another channel at any time.
	* In order to make sure that the fw is on a specific channel at a certain time
	* and for a certain duration, the driver needs to issue a time event.
	*
	* The simplest example is for BSS association. The driver issues a time event,
	* waits for it to start, and only then tells mac80211 that we can start the
	* association. This way, we make sure that the association will be done
	* smoothly and won't be interrupted by channel switch decided within the fw.
	*/

	/**
	* DOC: The flow against the fw
	*
	* When the driver needs to make sure we are in a certain channel, at a certain
	* time and for a certain duration, it sends a Time Event. The flow against the
	* fw goes like this:
	* 1) Driver sends a TIME_EVENT_CMD to the fw
	* 2) Driver gets the response for that command. This response contains the
	* Unique ID (UID) of the event.
	* 3) The fw sends notification when the event starts.
	*
	* Of course the API provides various options that allow to cover parameters
	* of the flow.
	* What is the duration of the event?
	* What is the start time of the event?
	* Is there an end-time for the event?
	* How much can the event be delayed?
	* Can the event be split?
	* If yes what is the maximal number of chunks?
	* etc...
	*/

	/**
	* DOC: Abstraction to the driver
	*
	* In order to simplify the use of time events to the rest of the driver,
	* we abstract the use of time events. This component provides the functions
	* needed by the driver.
	*/

	#define IWL_MVM_TE_SESSION_PROTECTION_MAX_TIME_MS 500
	#define IWL_MVM_TE_SESSION_PROTECTION_MIN_TIME_MS 400

	/**
	* iwl_mvm_protect_session - start / extend the session protection.
	* @mvm: the mvm component
	* @vif: the virtual interface for which the session is issued
	* @duration: the duration of the session in TU.
	* @min_duration: will start a new session if the current session will end
	* in less than min_duration.
	* @max_delay: maximum delay before starting the time event (in TU)
	*
	* This function can be used to start a session protection which means that the
	* fw will stay on the channel for %duration_ms milliseconds. This function
	* will block (sleep) until the session starts. This function can also be used
	* to extend a currently running session.
	* This function is meant to be used for BSS association for example, where we
	* want to make sure that the fw stays on the channel during the association.
	*/
	void iwl_mvm_protect_session(struct iwl_mvm *mvm,
	struct ieee80211_vif *vif,
	u32 duration, u32 min_duration,
	u32 max_delay);

	/**
	* iwl_mvm_stop_session_protection - cancel the session protection.
	* @mvm: the mvm component
	* @vif: the virtual interface for which the session is issued
	*
	* This functions cancels the session protection which is an act of good
	* citizenship. If it is not needed any more it should be cancelled because
	* the other bindings wait for the medium during that time.
	* This funtions doesn't sleep.
	*/
	void iwl_mvm_stop_session_protection(struct iwl_mvm *mvm,
	struct ieee80211_vif *vif);

	/*
	* iwl_mvm_rx_time_event_notif - handles %TIME_EVENT_NOTIFICATION.
	*/
	int iwl_mvm_rx_time_event_notif(struct iwl_mvm *mvm,
	struct iwl_rx_cmd_buffer *rxb,
	struct iwl_device_cmd *cmd);

	/**
	* iwl_mvm_start_p2p_roc - start remain on channel for p2p device functionlity
	* @mvm: the mvm component
	* @vif: the virtual interface for which the roc is requested. It is assumed
	* that the vif type is NL80211_IFTYPE_P2P_DEVICE
	* @duration: the requested duration in millisecond for the fw to be on the
	* channel that is bound to the vif.
	* @type: the remain on channel request type
	*
	* This function can be used to issue a remain on channel session,
	* which means that the fw will stay in the channel for the request %duration
	* milliseconds. The function is async, meaning that it only issues the ROC
	* request but does not wait for it to start. Once the FW is ready to serve the
	* ROC request, it will issue a notification to the driver that it is on the
	* requested channel. Once the FW completes the ROC request it will issue
	* another notification to the driver.
	*/
	int iwl_mvm_start_p2p_roc(struct iwl_mvm mvm, struct ieee80211_vif vif,
	int duration, enum ieee80211_roc_type type);

	/**
	* iwl_mvm_stop_p2p_roc - stop remain on channel for p2p device functionlity
	* @mvm: the mvm component
	*
	* This function can be used to cancel an ongoing ROC session.
	* The function is async, it will instruct the FW to stop serving the ROC
	* session, but will not wait for the actual stopping of the session.
	*/
	void iwl_mvm_stop_p2p_roc(struct iwl_mvm *mvm);

	/**
	* iwl_mvm_remove_time_event - general function to clean up of time event
	* @mvm: the mvm component
	* @vif: the vif to which the time event belongs
	* @te_data: the time event data that corresponds to that time event
	*
	* This function can be used to cancel a time event regardless its type.
	* It is useful for cleaning up time events running before removing an
	* interface.
	*/
	void iwl_mvm_remove_time_event(struct iwl_mvm *mvm,
	struct iwl_mvm_vif *mvmvif,
	struct iwl_mvm_time_event_data *te_data);

	/**
	* iwl_mvm_te_clear_data - remove time event from list
	* @mvm: the mvm component
	* @te_data: the time event data to remove
	*
	* This function is mostly internal, it is made available here only
	* for firmware restart purposes.
	*/
	void iwl_mvm_te_clear_data(struct iwl_mvm *mvm,
	struct iwl_mvm_time_event_data *te_data);

	void iwl_mvm_roc_done_wk(struct work_struct *wk);

	#endif /* __time_event_h__ */