mmc: sdhci-pci: add support of O2Micro/BayHubTech SD hosts
Add O2Micro/BayHubTech SD Host DeviceId 8520 support.
Add O2Micro/BayHubTech SD Host DeviceId 8420 & 8421 support.
Add O2Micro/BayHubTech SD Host DeviceId 8620 & 8621 support.
These card readers are used in laptops like Lenovo ThinkPad W540,
Dell Latitude E5440, Dell Latitude E6540.
Signed-off-by: Peter Guo <peter.guo@bayhubtech.com>
Signed-off-by: Adam Lee <adam.lee@canonical.com>
Signed-off-by: Chris Ball <chris@printf.net>
diff --git a/drivers/mmc/host/sdhci-pci-o2micro.c b/drivers/mmc/host/sdhci-pci-o2micro.c
new file mode 100644
index 0000000..f49666b
--- /dev/null
+++ b/drivers/mmc/host/sdhci-pci-o2micro.c
@@ -0,0 +1,321 @@
+/*
+ * Copyright (C) 2013 BayHub Technology Ltd.
+ *
+ * Authors: Peter Guo <peter.guo@bayhubtech.com>
+ * Adam Lee <adam.lee@canonical.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/pci.h>
+
+#include "sdhci.h"
+#include "sdhci-pci.h"
+#include "sdhci-pci-o2micro.h"
+
+void sdhci_pci_o2_fujin2_pci_init(struct sdhci_pci_chip *chip)
+{
+ u32 scratch_32;
+ int ret;
+ /* Improve write performance for SD3.0 */
+ ret = pci_read_config_dword(chip->pdev, O2_SD_DEV_CTRL, &scratch_32);
+ if (ret)
+ return;
+ scratch_32 &= ~((1 << 12) | (1 << 13) | (1 << 14));
+ pci_write_config_dword(chip->pdev, O2_SD_DEV_CTRL, scratch_32);
+
+ /* Enable Link abnormal reset generating Reset */
+ ret = pci_read_config_dword(chip->pdev, O2_SD_MISC_REG5, &scratch_32);
+ if (ret)
+ return;
+ scratch_32 &= ~((1 << 19) | (1 << 11));
+ scratch_32 |= (1 << 10);
+ pci_write_config_dword(chip->pdev, O2_SD_MISC_REG5, scratch_32);
+
+ /* set card power over current protection */
+ ret = pci_read_config_dword(chip->pdev, O2_SD_TEST_REG, &scratch_32);
+ if (ret)
+ return;
+ scratch_32 |= (1 << 4);
+ pci_write_config_dword(chip->pdev, O2_SD_TEST_REG, scratch_32);
+
+ /* adjust the output delay for SD mode */
+ pci_write_config_dword(chip->pdev, O2_SD_DELAY_CTRL, 0x00002492);
+
+ /* Set the output voltage setting of Aux 1.2v LDO */
+ ret = pci_read_config_dword(chip->pdev, O2_SD_LD0_CTRL, &scratch_32);
+ if (ret)
+ return;
+ scratch_32 &= ~(3 << 12);
+ pci_write_config_dword(chip->pdev, O2_SD_LD0_CTRL, scratch_32);
+
+ /* Set Max power supply capability of SD host */
+ ret = pci_read_config_dword(chip->pdev, O2_SD_CAP_REG0, &scratch_32);
+ if (ret)
+ return;
+ scratch_32 &= ~(0x01FE);
+ scratch_32 |= 0x00CC;
+ pci_write_config_dword(chip->pdev, O2_SD_CAP_REG0, scratch_32);
+ /* Set DLL Tuning Window */
+ ret = pci_read_config_dword(chip->pdev,
+ O2_SD_TUNING_CTRL, &scratch_32);
+ if (ret)
+ return;
+ scratch_32 &= ~(0x000000FF);
+ scratch_32 |= 0x00000066;
+ pci_write_config_dword(chip->pdev, O2_SD_TUNING_CTRL, scratch_32);
+
+ /* Set UHS2 T_EIDLE */
+ ret = pci_read_config_dword(chip->pdev,
+ O2_SD_UHS2_L1_CTRL, &scratch_32);
+ if (ret)
+ return;
+ scratch_32 &= ~(0x000000FC);
+ scratch_32 |= 0x00000084;
+ pci_write_config_dword(chip->pdev, O2_SD_UHS2_L1_CTRL, scratch_32);
+
+ /* Set UHS2 Termination */
+ ret = pci_read_config_dword(chip->pdev, O2_SD_FUNC_REG3, &scratch_32);
+ if (ret)
+ return;
+ scratch_32 &= ~((1 << 21) | (1 << 30));
+
+ /* Set RTD3 function disabled */
+ scratch_32 |= ((1 << 29) | (1 << 28));
+ pci_write_config_dword(chip->pdev, O2_SD_FUNC_REG3, scratch_32);
+
+ /* Set L1 Entrance Timer */
+ ret = pci_read_config_dword(chip->pdev, O2_SD_CAPS, &scratch_32);
+ if (ret)
+ return;
+ scratch_32 &= ~(0xf0000000);
+ scratch_32 |= 0x30000000;
+ pci_write_config_dword(chip->pdev, O2_SD_CAPS, scratch_32);
+
+ ret = pci_read_config_dword(chip->pdev,
+ O2_SD_MISC_CTRL4, &scratch_32);
+ if (ret)
+ return;
+ scratch_32 &= ~(0x000f0000);
+ scratch_32 |= 0x00080000;
+ pci_write_config_dword(chip->pdev, O2_SD_MISC_CTRL4, scratch_32);
+}
+EXPORT_SYMBOL_GPL(sdhci_pci_o2_fujin2_pci_init);
+
+int sdhci_pci_o2_probe_slot(struct sdhci_pci_slot *slot)
+{
+ struct sdhci_pci_chip *chip;
+ struct sdhci_host *host;
+ u32 reg;
+
+ chip = slot->chip;
+ host = slot->host;
+ switch (chip->pdev->device) {
+ case PCI_DEVICE_ID_O2_SDS0:
+ case PCI_DEVICE_ID_O2_SEABIRD0:
+ case PCI_DEVICE_ID_O2_SEABIRD1:
+ case PCI_DEVICE_ID_O2_SDS1:
+ case PCI_DEVICE_ID_O2_FUJIN2:
+ reg = sdhci_readl(host, O2_SD_VENDOR_SETTING);
+ if (reg & 0x1)
+ host->quirks |= SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12;
+
+ if (chip->pdev->device != PCI_DEVICE_ID_O2_FUJIN2)
+ break;
+ /* set dll watch dog timer */
+ reg = sdhci_readl(host, O2_SD_VENDOR_SETTING2);
+ reg |= (1 << 12);
+ sdhci_writel(host, reg, O2_SD_VENDOR_SETTING2);
+
+ break;
+ default:
+ break;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(sdhci_pci_o2_probe_slot);
+
+int sdhci_pci_o2_probe(struct sdhci_pci_chip *chip)
+{
+ int ret;
+ u8 scratch;
+ u32 scratch_32;
+
+ switch (chip->pdev->device) {
+ case PCI_DEVICE_ID_O2_8220:
+ case PCI_DEVICE_ID_O2_8221:
+ case PCI_DEVICE_ID_O2_8320:
+ case PCI_DEVICE_ID_O2_8321:
+ /* This extra setup is required due to broken ADMA. */
+ ret = pci_read_config_byte(chip->pdev,
+ O2_SD_LOCK_WP, &scratch);
+ if (ret)
+ return ret;
+ scratch &= 0x7f;
+ pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
+
+ /* Set Multi 3 to VCC3V# */
+ pci_write_config_byte(chip->pdev, O2_SD_MULTI_VCC3V, 0x08);
+
+ /* Disable CLK_REQ# support after media DET */
+ ret = pci_read_config_byte(chip->pdev,
+ O2_SD_CLKREQ, &scratch);
+ if (ret)
+ return ret;
+ scratch |= 0x20;
+ pci_write_config_byte(chip->pdev, O2_SD_CLKREQ, scratch);
+
+ /* Choose capabilities, enable SDMA. We have to write 0x01
+ * to the capabilities register first to unlock it.
+ */
+ ret = pci_read_config_byte(chip->pdev, O2_SD_CAPS, &scratch);
+ if (ret)
+ return ret;
+ scratch |= 0x01;
+ pci_write_config_byte(chip->pdev, O2_SD_CAPS, scratch);
+ pci_write_config_byte(chip->pdev, O2_SD_CAPS, 0x73);
+
+ /* Disable ADMA1/2 */
+ pci_write_config_byte(chip->pdev, O2_SD_ADMA1, 0x39);
+ pci_write_config_byte(chip->pdev, O2_SD_ADMA2, 0x08);
+
+ /* Disable the infinite transfer mode */
+ ret = pci_read_config_byte(chip->pdev,
+ O2_SD_INF_MOD, &scratch);
+ if (ret)
+ return ret;
+ scratch |= 0x08;
+ pci_write_config_byte(chip->pdev, O2_SD_INF_MOD, scratch);
+
+ /* Lock WP */
+ ret = pci_read_config_byte(chip->pdev,
+ O2_SD_LOCK_WP, &scratch);
+ if (ret)
+ return ret;
+ scratch |= 0x80;
+ pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
+ break;
+ case PCI_DEVICE_ID_O2_SDS0:
+ case PCI_DEVICE_ID_O2_SDS1:
+ case PCI_DEVICE_ID_O2_FUJIN2:
+ /* UnLock WP */
+ ret = pci_read_config_byte(chip->pdev,
+ O2_SD_LOCK_WP, &scratch);
+ if (ret)
+ return ret;
+
+ scratch &= 0x7f;
+ pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
+
+ /* Set timeout CLK */
+ ret = pci_read_config_dword(chip->pdev,
+ O2_SD_CLK_SETTING, &scratch_32);
+ if (ret)
+ return ret;
+
+ scratch_32 &= ~(0xFF00);
+ scratch_32 |= 0x07E0C800;
+ pci_write_config_dword(chip->pdev,
+ O2_SD_CLK_SETTING, scratch_32);
+
+ ret = pci_read_config_dword(chip->pdev,
+ O2_SD_CLKREQ, &scratch_32);
+ if (ret)
+ return ret;
+ scratch_32 |= 0x3;
+ pci_write_config_dword(chip->pdev, O2_SD_CLKREQ, scratch_32);
+
+ ret = pci_read_config_dword(chip->pdev,
+ O2_SD_PLL_SETTING, &scratch_32);
+ if (ret)
+ return ret;
+
+ scratch_32 &= ~(0x1F3F070E);
+ scratch_32 |= 0x18270106;
+ pci_write_config_dword(chip->pdev,
+ O2_SD_PLL_SETTING, scratch_32);
+
+ /* Disable UHS1 funciton */
+ ret = pci_read_config_dword(chip->pdev,
+ O2_SD_CAP_REG2, &scratch_32);
+ if (ret)
+ return ret;
+ scratch_32 &= ~(0xE0);
+ pci_write_config_dword(chip->pdev,
+ O2_SD_CAP_REG2, scratch_32);
+
+ if (chip->pdev->device == PCI_DEVICE_ID_O2_FUJIN2)
+ sdhci_pci_o2_fujin2_pci_init(chip);
+
+ /* Lock WP */
+ ret = pci_read_config_byte(chip->pdev,
+ O2_SD_LOCK_WP, &scratch);
+ if (ret)
+ return ret;
+ scratch |= 0x80;
+ pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
+ break;
+ case PCI_DEVICE_ID_O2_SEABIRD0:
+ case PCI_DEVICE_ID_O2_SEABIRD1:
+ /* UnLock WP */
+ ret = pci_read_config_byte(chip->pdev,
+ O2_SD_LOCK_WP, &scratch);
+ if (ret)
+ return ret;
+
+ scratch &= 0x7f;
+ pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
+
+ ret = pci_read_config_dword(chip->pdev,
+ O2_SD_FUNC_REG0, &scratch_32);
+
+ if ((scratch_32 & 0xff000000) == 0x01000000) {
+ scratch_32 &= 0x0000FFFF;
+ scratch_32 |= 0x1F340000;
+
+ pci_write_config_dword(chip->pdev,
+ O2_SD_PLL_SETTING, scratch_32);
+ } else {
+ scratch_32 &= 0x0000FFFF;
+ scratch_32 |= 0x2c280000;
+
+ pci_write_config_dword(chip->pdev,
+ O2_SD_PLL_SETTING, scratch_32);
+
+ ret = pci_read_config_dword(chip->pdev,
+ O2_SD_FUNC_REG4,
+ &scratch_32);
+ scratch_32 |= (1 << 22);
+ pci_write_config_dword(chip->pdev,
+ O2_SD_FUNC_REG4, scratch_32);
+ }
+
+ /* Lock WP */
+ ret = pci_read_config_byte(chip->pdev,
+ O2_SD_LOCK_WP, &scratch);
+ if (ret)
+ return ret;
+ scratch |= 0x80;
+ pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch);
+ break;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(sdhci_pci_o2_probe);
+
+int sdhci_pci_o2_resume(struct sdhci_pci_chip *chip)
+{
+ sdhci_pci_o2_probe(chip);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(sdhci_pci_o2_resume);