TTY: amiserial/simserial, use flags from tty_port
This changes flags' type to ulong which is appropriate for all the
set/clear_bits performed in the drivers..
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/arch/ia64/hp/sim/simserial.c b/arch/ia64/hp/sim/simserial.c
index baa2b1e..c65c49d 100644
--- a/arch/ia64/hp/sim/simserial.c
+++ b/arch/ia64/hp/sim/simserial.c
@@ -448,7 +448,7 @@
{
unsigned long flags;
- if (!(info->flags & ASYNC_INITIALIZED))
+ if (!(info->tport.flags & ASYNC_INITIALIZED))
return;
#ifdef SIMSERIAL_DEBUG
@@ -468,7 +468,7 @@
set_bit(TTY_IO_ERROR, &tty->flags);
- info->flags &= ~ASYNC_INITIALIZED;
+ info->tport.flags &= ~ASYNC_INITIALIZED;
}
local_irq_restore(flags);
}
@@ -523,7 +523,7 @@
local_irq_restore(flags);
return;
}
- info->flags |= ASYNC_CLOSING;
+ info->tport.flags |= ASYNC_CLOSING;
local_irq_restore(flags);
/*
@@ -539,7 +539,7 @@
schedule_timeout_interruptible(info->tport.close_delay);
wake_up_interruptible(&info->tport.open_wait);
}
- info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
+ info->tport.flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
wake_up_interruptible(&info->tport.close_wait);
}
@@ -563,12 +563,12 @@
#endif
rs_flush_buffer(tty);
- if (info->flags & ASYNC_CLOSING)
+ if (info->tport.flags & ASYNC_CLOSING)
return;
shutdown(tty, info);
info->tport.count = 0;
- info->flags &= ~ASYNC_NORMAL_ACTIVE;
+ info->tport.flags &= ~ASYNC_NORMAL_ACTIVE;
info->tport.tty = NULL;
wake_up_interruptible(&info->tport.open_wait);
}
@@ -576,6 +576,7 @@
static int startup(struct tty_struct *tty, struct serial_state *state)
{
+ struct tty_port *port = &state->tport;
unsigned long flags;
int retval=0;
unsigned long page;
@@ -586,7 +587,7 @@
local_irq_save(flags);
- if (state->flags & ASYNC_INITIALIZED) {
+ if (port->flags & ASYNC_INITIALIZED) {
free_page(page);
goto errout;
}
@@ -630,16 +631,16 @@
/*
* Set up the tty->alt_speed kludge
*/
- if ((state->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
+ if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
tty->alt_speed = 57600;
- if ((state->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
+ if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
tty->alt_speed = 115200;
- if ((state->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
+ if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
tty->alt_speed = 230400;
- if ((state->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
+ if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
tty->alt_speed = 460800;
- state->flags |= ASYNC_INITIALIZED;
+ port->flags |= ASYNC_INITIALIZED;
local_irq_restore(flags);
return 0;
@@ -669,7 +670,7 @@
#ifdef SIMSERIAL_DEBUG
printk("rs_open %s, count = %d\n", tty->name, info->tport.count);
#endif
- tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
+ tty->low_latency = (info->tport.flags & ASYNC_LOW_LATENCY) ? 1 : 0;
if (!tmp_buf) {
page = get_zeroed_page(GFP_KERNEL);
@@ -684,11 +685,11 @@
/*
* If the port is the middle of closing, bail out now
*/
- if (tty_hung_up_p(filp) || (info->flags & ASYNC_CLOSING)) {
- if (info->flags & ASYNC_CLOSING)
+ if (tty_hung_up_p(filp) || (info->tport.flags & ASYNC_CLOSING)) {
+ if (info->tport.flags & ASYNC_CLOSING)
interruptible_sleep_on(&info->tport.close_wait);
#ifdef SERIAL_DO_RESTART
- return ((info->flags & ASYNC_HUP_NOTIFY) ?
+ return ((info->tport.flags & ASYNC_HUP_NOTIFY) ?
-EAGAIN : -ERESTARTSYS);
#else
return -EAGAIN;
diff --git a/drivers/tty/amiserial.c b/drivers/tty/amiserial.c
index 8ad64a0..7d79826 100644
--- a/drivers/tty/amiserial.c
+++ b/drivers/tty/amiserial.c
@@ -45,7 +45,7 @@
#if defined(MODULE) && defined(SERIAL_DEBUG_MCOUNT)
#define DBG_CNT(s) printk("(%s): [%x] refc=%d, serc=%d, ttyc=%d -> %s\n", \
- tty->name, (info->flags), serial_driver->refcount,info->count,tty->count,s)
+ tty->name, (info->tport.flags), serial_driver->refcount,info->count,tty->count,s)
#else
#define DBG_CNT(s)
#endif
@@ -296,7 +296,7 @@
printk("handling break....");
#endif
flag = TTY_BREAK;
- if (info->flags & ASYNC_SAK)
+ if (info->tport.flags & ASYNC_SAK)
do_SAK(tty);
} else if (status & UART_LSR_PE)
flag = TTY_PARITY;
@@ -377,7 +377,7 @@
if (dstatus & SER_DCD) {
icount->dcd++;
#ifdef CONFIG_HARD_PPS
- if ((info->flags & ASYNC_HARDPPS_CD) &&
+ if ((info->tport.flags & ASYNC_HARDPPS_CD) &&
!(status & SER_DCD))
hardpps();
#endif
@@ -387,7 +387,7 @@
wake_up_interruptible(&info->tport.delta_msr_wait);
}
- if ((info->flags & ASYNC_CHECK_CD) && (dstatus & SER_DCD)) {
+ if ((info->tport.flags & ASYNC_CHECK_CD) && (dstatus & SER_DCD)) {
#if (defined(SERIAL_DEBUG_OPEN) || defined(SERIAL_DEBUG_INTR))
printk("ttyS%d CD now %s...", info->line,
(!(status & SER_DCD)) ? "on" : "off");
@@ -402,7 +402,7 @@
tty_hangup(info->tport.tty);
}
}
- if (info->flags & ASYNC_CTS_FLOW) {
+ if (info->tport.flags & ASYNC_CTS_FLOW) {
if (info->tport.tty->hw_stopped) {
if (!(status & SER_CTS)) {
#if (defined(SERIAL_DEBUG_INTR) || defined(SERIAL_DEBUG_FLOW))
@@ -503,6 +503,7 @@
static int startup(struct tty_struct *tty, struct serial_state *info)
{
+ struct tty_port *port = &info->tport;
unsigned long flags;
int retval=0;
unsigned long page;
@@ -513,7 +514,7 @@
local_irq_save(flags);
- if (info->flags & ASYNC_INITIALIZED) {
+ if (port->flags & ASYNC_INITIALIZED) {
free_page(page);
goto errout;
}
@@ -560,13 +561,13 @@
/*
* Set up the tty->alt_speed kludge
*/
- if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
+ if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
tty->alt_speed = 57600;
- if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
+ if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
tty->alt_speed = 115200;
- if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
+ if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
tty->alt_speed = 230400;
- if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
+ if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
tty->alt_speed = 460800;
/*
@@ -574,7 +575,7 @@
*/
change_speed(tty, info, NULL);
- info->flags |= ASYNC_INITIALIZED;
+ port->flags |= ASYNC_INITIALIZED;
local_irq_restore(flags);
return 0;
@@ -592,7 +593,7 @@
unsigned long flags;
struct serial_state *state;
- if (!(info->flags & ASYNC_INITIALIZED))
+ if (!(info->tport.flags & ASYNC_INITIALIZED))
return;
state = info;
@@ -633,7 +634,7 @@
set_bit(TTY_IO_ERROR, &tty->flags);
- info->flags &= ~ASYNC_INITIALIZED;
+ info->tport.flags &= ~ASYNC_INITIALIZED;
local_irq_restore(flags);
}
@@ -645,6 +646,7 @@
static void change_speed(struct tty_struct *tty, struct serial_state *info,
struct ktermios *old_termios)
{
+ struct tty_port *port = &info->tport;
int quot = 0, baud_base, baud;
unsigned cflag, cval = 0;
int bits;
@@ -675,8 +677,7 @@
if (!baud)
baud = 9600; /* B0 transition handled in rs_set_termios */
baud_base = info->baud_base;
- if (baud == 38400 &&
- ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST))
+ if (baud == 38400 && (port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST)
quot = info->custom_divisor;
else {
if (baud == 134)
@@ -694,7 +695,7 @@
if (!baud)
baud = 9600;
if (baud == 38400 &&
- ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST))
+ (port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST)
quot = info->custom_divisor;
else {
if (baud == 134)
@@ -713,17 +714,17 @@
/* CTS flow control flag and modem status interrupts */
info->IER &= ~UART_IER_MSI;
- if (info->flags & ASYNC_HARDPPS_CD)
+ if (port->flags & ASYNC_HARDPPS_CD)
info->IER |= UART_IER_MSI;
if (cflag & CRTSCTS) {
- info->flags |= ASYNC_CTS_FLOW;
+ port->flags |= ASYNC_CTS_FLOW;
info->IER |= UART_IER_MSI;
} else
- info->flags &= ~ASYNC_CTS_FLOW;
+ port->flags &= ~ASYNC_CTS_FLOW;
if (cflag & CLOCAL)
- info->flags &= ~ASYNC_CHECK_CD;
+ port->flags &= ~ASYNC_CHECK_CD;
else {
- info->flags |= ASYNC_CHECK_CD;
+ port->flags |= ASYNC_CHECK_CD;
info->IER |= UART_IER_MSI;
}
/* TBD:
@@ -1019,7 +1020,7 @@
tmp.line = state->line;
tmp.port = state->port;
tmp.irq = state->irq;
- tmp.flags = state->flags;
+ tmp.flags = state->tport.flags;
tmp.xmit_fifo_size = state->xmit_fifo_size;
tmp.baud_base = state->baud_base;
tmp.close_delay = state->tport.close_delay;
@@ -1034,6 +1035,7 @@
static int set_serial_info(struct tty_struct *tty, struct serial_state *state,
struct serial_struct __user * new_info)
{
+ struct tty_port *port = &state->tport;
struct serial_struct new_serial;
bool change_spd;
int retval = 0;
@@ -1042,7 +1044,7 @@
return -EFAULT;
tty_lock();
- change_spd = ((new_serial.flags ^ state->flags) & ASYNC_SPD_MASK) ||
+ change_spd = ((new_serial.flags ^ port->flags) & ASYNC_SPD_MASK) ||
new_serial.custom_divisor != state->custom_divisor;
if (new_serial.irq != state->irq || new_serial.port != state->port ||
new_serial.xmit_fifo_size != state->xmit_fifo_size) {
@@ -1052,12 +1054,12 @@
if (!serial_isroot()) {
if ((new_serial.baud_base != state->baud_base) ||
- (new_serial.close_delay != state->tport.close_delay) ||
+ (new_serial.close_delay != port->close_delay) ||
(new_serial.xmit_fifo_size != state->xmit_fifo_size) ||
((new_serial.flags & ~ASYNC_USR_MASK) !=
- (state->flags & ~ASYNC_USR_MASK)))
+ (port->flags & ~ASYNC_USR_MASK)))
return -EPERM;
- state->flags = ((state->flags & ~ASYNC_USR_MASK) |
+ port->flags = ((port->flags & ~ASYNC_USR_MASK) |
(new_serial.flags & ASYNC_USR_MASK));
state->custom_divisor = new_serial.custom_divisor;
goto check_and_exit;
@@ -1074,23 +1076,23 @@
*/
state->baud_base = new_serial.baud_base;
- state->flags = ((state->flags & ~ASYNC_FLAGS) |
+ port->flags = ((port->flags & ~ASYNC_FLAGS) |
(new_serial.flags & ASYNC_FLAGS));
state->custom_divisor = new_serial.custom_divisor;
- state->tport.close_delay = new_serial.close_delay * HZ/100;
- state->tport.closing_wait = new_serial.closing_wait * HZ/100;
- tty->low_latency = (state->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
+ port->close_delay = new_serial.close_delay * HZ/100;
+ port->closing_wait = new_serial.closing_wait * HZ/100;
+ tty->low_latency = (port->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
check_and_exit:
- if (state->flags & ASYNC_INITIALIZED) {
+ if (port->flags & ASYNC_INITIALIZED) {
if (change_spd) {
- if ((state->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
+ if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
tty->alt_speed = 57600;
- if ((state->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
+ if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
tty->alt_speed = 115200;
- if ((state->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
+ if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
tty->alt_speed = 230400;
- if ((state->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
+ if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
tty->alt_speed = 460800;
change_speed(tty, state, NULL);
}
@@ -1407,7 +1409,7 @@
local_irq_restore(flags);
return;
}
- state->flags |= ASYNC_CLOSING;
+ state->tport.flags |= ASYNC_CLOSING;
/*
* Now we wait for the transmit buffer to clear; and we notify
* the line discipline to only process XON/XOFF characters.
@@ -1422,7 +1424,7 @@
* line status register.
*/
state->read_status_mask &= ~UART_LSR_DR;
- if (state->flags & ASYNC_INITIALIZED) {
+ if (state->tport.flags & ASYNC_INITIALIZED) {
/* disable receive interrupts */
custom.intena = IF_RBF;
mb();
@@ -1449,7 +1451,7 @@
}
wake_up_interruptible(&state->tport.open_wait);
}
- state->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
+ state->tport.flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
wake_up_interruptible(&state->tport.close_wait);
local_irq_restore(flags);
}
@@ -1530,7 +1532,7 @@
rs_flush_buffer(tty);
shutdown(tty, info);
info->tport.count = 0;
- info->flags &= ~ASYNC_NORMAL_ACTIVE;
+ info->tport.flags &= ~ASYNC_NORMAL_ACTIVE;
info->tport.tty = NULL;
wake_up_interruptible(&info->tport.open_wait);
}
@@ -1548,6 +1550,7 @@
#else
struct wait_queue wait = { current, NULL };
#endif
+ struct tty_port *port = &info->tport;
int retval;
int do_clocal = 0, extra_count = 0;
unsigned long flags;
@@ -1557,11 +1560,11 @@
* until it's done, and then try again.
*/
if (tty_hung_up_p(filp) ||
- (info->flags & ASYNC_CLOSING)) {
- if (info->flags & ASYNC_CLOSING)
- interruptible_sleep_on(&info->tport.close_wait);
+ (port->flags & ASYNC_CLOSING)) {
+ if (port->flags & ASYNC_CLOSING)
+ interruptible_sleep_on(&port->close_wait);
#ifdef SERIAL_DO_RESTART
- return ((info->flags & ASYNC_HUP_NOTIFY) ?
+ return ((port->flags & ASYNC_HUP_NOTIFY) ?
-EAGAIN : -ERESTARTSYS);
#else
return -EAGAIN;
@@ -1574,7 +1577,7 @@
*/
if ((filp->f_flags & O_NONBLOCK) ||
(tty->flags & (1 << TTY_IO_ERROR))) {
- info->flags |= ASYNC_NORMAL_ACTIVE;
+ port->flags |= ASYNC_NORMAL_ACTIVE;
return 0;
}
@@ -1584,23 +1587,23 @@
/*
* Block waiting for the carrier detect and the line to become
* free (i.e., not in use by the callout). While we are in
- * this loop, info->tport.count is dropped by one, so that
+ * this loop, port->count is dropped by one, so that
* rs_close() knows when to free things. We restore it upon
* exit, either normal or abnormal.
*/
retval = 0;
- add_wait_queue(&info->tport.open_wait, &wait);
+ add_wait_queue(&port->open_wait, &wait);
#ifdef SERIAL_DEBUG_OPEN
printk("block_til_ready before block: ttys%d, count = %d\n",
- info->line, info->tport.count);
+ info->line, port->count);
#endif
local_irq_save(flags);
if (!tty_hung_up_p(filp)) {
extra_count = 1;
- info->tport.count--;
+ port->count--;
}
local_irq_restore(flags);
- info->tport.blocked_open++;
+ port->blocked_open++;
while (1) {
local_irq_save(flags);
if (tty->termios->c_cflag & CBAUD)
@@ -1608,9 +1611,9 @@
local_irq_restore(flags);
set_current_state(TASK_INTERRUPTIBLE);
if (tty_hung_up_p(filp) ||
- !(info->flags & ASYNC_INITIALIZED)) {
+ !(port->flags & ASYNC_INITIALIZED)) {
#ifdef SERIAL_DO_RESTART
- if (info->flags & ASYNC_HUP_NOTIFY)
+ if (port->flags & ASYNC_HUP_NOTIFY)
retval = -EAGAIN;
else
retval = -ERESTARTSYS;
@@ -1619,7 +1622,7 @@
#endif
break;
}
- if (!(info->flags & ASYNC_CLOSING) &&
+ if (!(port->flags & ASYNC_CLOSING) &&
(do_clocal || (!(ciab.pra & SER_DCD)) ))
break;
if (signal_pending(current)) {
@@ -1628,24 +1631,24 @@
}
#ifdef SERIAL_DEBUG_OPEN
printk("block_til_ready blocking: ttys%d, count = %d\n",
- info->line, info->tport.count);
+ info->line, port->count);
#endif
tty_unlock();
schedule();
tty_lock();
}
__set_current_state(TASK_RUNNING);
- remove_wait_queue(&info->tport.open_wait, &wait);
+ remove_wait_queue(&port->open_wait, &wait);
if (extra_count)
- info->tport.count++;
- info->tport.blocked_open--;
+ port->count++;
+ port->blocked_open--;
#ifdef SERIAL_DEBUG_OPEN
printk("block_til_ready after blocking: ttys%d, count = %d\n",
- info->line, info->tport.count);
+ info->line, port->count);
#endif
if (retval)
return retval;
- info->flags |= ASYNC_NORMAL_ACTIVE;
+ port->flags |= ASYNC_NORMAL_ACTIVE;
return 0;
}
@@ -1670,17 +1673,17 @@
#ifdef SERIAL_DEBUG_OPEN
printk("rs_open %s, count = %d\n", tty->name, info->count);
#endif
- tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
+ tty->low_latency = (info->tport.flags & ASYNC_LOW_LATENCY) ? 1 : 0;
/*
* If the port is the middle of closing, bail out now
*/
if (tty_hung_up_p(filp) ||
- (info->flags & ASYNC_CLOSING)) {
- if (info->flags & ASYNC_CLOSING)
+ (info->tport.flags & ASYNC_CLOSING)) {
+ if (info->tport.flags & ASYNC_CLOSING)
interruptible_sleep_on(&info->tport.close_wait);
#ifdef SERIAL_DO_RESTART
- return ((info->flags & ASYNC_HUP_NOTIFY) ?
+ return ((info->tport.flags & ASYNC_HUP_NOTIFY) ?
-EAGAIN : -ERESTARTSYS);
#else
return -EAGAIN;
@@ -1723,7 +1726,7 @@
local_irq_save(flags);
status = ciab.pra;
- control = (state->flags & ASYNC_INITIALIZED) ? state->MCR : status;
+ control = (state->tport.flags & ASYNC_INITIALIZED) ? state->MCR : status;
local_irq_restore(flags);
stat_buf[0] = 0;
diff --git a/include/linux/serialP.h b/include/linux/serialP.h
index a6612b9..e5e8442 100644
--- a/include/linux/serialP.h
+++ b/include/linux/serialP.h
@@ -30,7 +30,6 @@
int baud_base;
unsigned long port;
int irq;
- int flags;
int type;
int line;
int xmit_fifo_size;