arch/arm64/boot/dts/marvell/armada-37xx.dtsi - kernel/msm-4.19 - Gitiles

 /*
  * Device Tree Include file for Marvell Armada 37xx family of SoCs.
  *
  * Copyright (C) 2016 Marvell
  *
  * Gregory CLEMENT <gregory.clement@free-electrons.com>
  *
  * This file is dual-licensed: you can use it either under the terms
  * of the GPL or the X11 license, at your option. Note that this dual
  * licensing only applies to this file, and not this project as a
  * whole.
  *
  *  a) This file is free software; you can redistribute it and/or
  *     modify it under the terms of the GNU General Public License as
  *     published by the Free Software Foundation; either version 2 of the
  *     License, or (at your option) any later version.
  *
  *     This file is distributed in the hope that it will be useful,
  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
  *     obtaining a copy of this software and associated documentation
  *     files (the "Software"), to deal in the Software without
  *     restriction, including without limitation the rights to use,
  *     copy, modify, merge, publish, distribute, sublicense, and/or
  *     sell copies of the Software, and to permit persons to whom the
  *     Software is furnished to do so, subject to the following
  *     conditions:
  *
  *     The above copyright notice and this permission notice shall be
  *     included in all copies or substantial portions of the Software.
  *
  *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
  *     OTHER DEALINGS IN THE SOFTWARE.
  */

 #include <dt-bindings/interrupt-controller/arm-gic.h>

 / {
 	model = "Marvell Armada 37xx SoC";
 	compatible = "marvell,armada3700";
 	interrupt-parent = <&gic>;
 	#address-cells = <2>;
 	#size-cells = <2>;

 	aliases {
 		serial0 = &uart0;
 	};

 	cpus {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		cpu@0 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a53", "arm,armv8";
 			reg = <0>;
 			enable-method = "psci";
 		};
 	};

 	psci {
 		compatible = "arm,psci-0.2";
 		method = "smc";
 	};

 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>,
 			     <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>;
 	};

 	soc {
 		compatible = "simple-bus";
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;

 		internal-regs@d0000000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			compatible = "simple-bus";
 			/* 32M internal register @ 0xd000_0000 */
 			ranges = <0x0 0x0 0xd0000000 0x2000000>;

 			spi0: spi@10600 {
 				compatible = "marvell,armada-3700-spi";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				reg = <0x10600 0xA00>;
 				clocks = <&nb_periph_clk 7>;
 				interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
 				num-cs = <4>;
 				status = "disabled";
 			};

 			i2c0: i2c@11000 {
 				compatible = "marvell,armada-3700-i2c";
 				reg = <0x11000 0x24>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				clocks = <&nb_periph_clk 10>;
 				interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
 				mrvl,i2c-fast-mode;
 				status = "disabled";
 			};

 			i2c1: i2c@11080 {
 				compatible = "marvell,armada-3700-i2c";
 				reg = <0x11080 0x24>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				clocks = <&nb_periph_clk 9>;
 				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
 				mrvl,i2c-fast-mode;
 				status = "disabled";
 			};

 			uart0: serial@12000 {
 				compatible = "marvell,armada-3700-uart";
 				reg = <0x12000 0x400>;
 				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};

 			nb_periph_clk: nb-periph-clk@13000 {
 				compatible = "marvell,armada-3700-periph-clock-nb";
 				reg = <0x13000 0x100>;
 				clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>,
 				<&tbg 3>, <&xtalclk>;
 				#clock-cells = <1>;
 			};

 			sb_periph_clk: sb-periph-clk@18000 {
 				compatible = "marvell,armada-3700-periph-clock-sb";
 				reg = <0x18000 0x100>;
 				clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>,
 				<&tbg 3>, <&xtalclk>;
 				#clock-cells = <1>;
 			};

 			tbg: tbg@13200 {
 				compatible = "marvell,armada-3700-tbg-clock";
 				reg = <0x13200 0x100>;
 				clocks = <&xtalclk>;
 				#clock-cells = <1>;
 			};

 			pinctrl_nb: pinctrl@13800 {
 				compatible = "marvell,armada3710-nb-pinctrl",
 					     "syscon", "simple-mfd";
 				reg = <0x13800 0x100>, <0x13C00 0x20>;
 				gpionb: gpio {
 					#gpio-cells = <2>;
 					gpio-ranges = <&pinctrl_nb 0 0 36>;
 					gpio-controller;
 					interrupts =
 					<GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
 					<GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
 					<GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
 					<GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
 					<GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
 					<GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
 					<GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
 					<GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
 					<GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
 					<GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
 					<GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
 					<GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;

 				};

 				xtalclk: xtal-clk {
 					compatible = "marvell,armada-3700-xtal-clock";
 					clock-output-names = "xtal";
 					#clock-cells = <0>;
 				};

 				spi_quad_pins: spi-quad-pins {
 					groups = "spi_quad";
 					function = "spi";
 				};

 				i2c1_pins: i2c1-pins {
 					groups = "i2c1";
 					function = "i2c";
 				};

 				i2c2_pins: i2c2-pins {
 					groups = "i2c2";
 					function = "i2c";
 				};

 				uart1_pins: uart1-pins {
 					groups = "uart1";
 					function = "uart";
 				};

 				uart2_pins: uart2-pins {
 					groups = "uart2";
 					function = "uart";
 				};
 			};

 			pinctrl_sb: pinctrl@18800 {
 				compatible = "marvell,armada3710-sb-pinctrl",
 					     "syscon", "simple-mfd";
 				reg = <0x18800 0x100>, <0x18C00 0x20>;
 				gpiosb: gpio {
 					#gpio-cells = <2>;
 					gpio-ranges = <&pinctrl_sb 0 0 30>;
 					gpio-controller;
 					interrupts =
 					<GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
 					<GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
 					<GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
 					<GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
 					<GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
 				};

 				rgmii_pins: mii-pins {
 					groups = "rgmii";
 					function = "mii";
 				};

 			};

 			eth0: ethernet@30000 {
 				   compatible = "marvell,armada-3700-neta";
 				   reg = <0x30000 0x4000>;
 				   interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
 				   clocks = <&sb_periph_clk 8>;
 				   status = "disabled";
 			};

 			mdio: mdio@32004 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "marvell,orion-mdio";
 				reg = <0x32004 0x4>;
 			};

 			eth1: ethernet@40000 {
 				compatible = "marvell,armada-3700-neta";
 				reg = <0x40000 0x4000>;
 				interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&sb_periph_clk 7>;
 				status = "disabled";
 			};

 			usb3: usb@58000 {
 				compatible = "marvell,armada3700-xhci",
 				"generic-xhci";
 				reg = <0x58000 0x4000>;
 				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&sb_periph_clk 12>;
 				status = "disabled";
 			};

 			usb2: usb@5e000 {
 				compatible = "marvell,armada-3700-ehci";
 				reg = <0x5e000 0x2000>;
 				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};

 			xor@60900 {
 				compatible = "marvell,armada-3700-xor";
 				reg = <0x60900 0x100>,
 				      <0x60b00 0x100>;

 				xor10 {
 					interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
 				};
 				xor11 {
 					interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
 				};
 			};

 			sdhci1: sdhci@d0000 {
 				compatible = "marvell,armada-3700-sdhci",
 					     "marvell,sdhci-xenon";
 				reg = <0xd0000 0x300>,
 				      <0x1e808 0x4>;
 				interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&nb_periph_clk 0>;
 				clock-names = "core";
 				status = "disabled";
 			};

 			sdhci0: sdhci@d8000 {
 				compatible = "marvell,armada-3700-sdhci",
 					     "marvell,sdhci-xenon";
 				reg = <0xd8000 0x300>,
 				      <0x17808 0x4>;
 				interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&nb_periph_clk 0>;
 				clock-names = "core";
 				status = "disabled";
 			};

 			sata: sata@e0000 {
 				compatible = "marvell,armada-3700-ahci";
 				reg = <0xe0000 0x2000>;
 				interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
 				status = "disabled";
 			};

 			gic: interrupt-controller@1d00000 {
 				compatible = "arm,gic-v3";
 				#interrupt-cells = <3>;
 				interrupt-controller;
 				reg = <0x1d00000 0x10000>, /* GICD */
 				      <0x1d40000 0x40000>; /* GICR */
 			};
 		};

 		pcie0: pcie@d0070000 {
 			compatible = "marvell,armada-3700-pcie";
 			device_type = "pci";
 			status = "disabled";
 			reg = <0 0xd0070000 0 0x20000>;
 			#address-cells = <3>;
 			#size-cells = <2>;
 			bus-range = <0x00 0xff>;
 			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
 			#interrupt-cells = <1>;
 			msi-parent = <&pcie0>;
 			msi-controller;
 			ranges = <0x82000000 0 0xe8000000   0 0xe8000000 0 0x1000000 /* Port 0 MEM */
 				  0x81000000 0 0xe9000000   0 0xe9000000 0 0x10000>; /* Port 0 IO*/
 			interrupt-map-mask = <0 0 0 7>;
 			interrupt-map = <0 0 0 1 &pcie_intc 0>,
 					<0 0 0 2 &pcie_intc 1>,
 					<0 0 0 3 &pcie_intc 2>,
 					<0 0 0 4 &pcie_intc 3>;
 			pcie_intc: interrupt-controller {
 				interrupt-controller;
 				#interrupt-cells = <1>;
 			};
 		};
 	};
 };
	/*
	* Device Tree Include file for Marvell Armada 37xx family of SoCs.
	*
	* Copyright (C) 2016 Marvell
	*
	* Gregory CLEMENT <gregory.clement@free-electrons.com>
	*
	* This file is dual-licensed: you can use it either under the terms
	* of the GPL or the X11 license, at your option. Note that this dual
	* licensing only applies to this file, and not this project as a
	* whole.
	*
	* a) This file is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License as
	* published by the Free Software Foundation; either version 2 of the
	* License, or (at your option) any later version.
	*
	* This file is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* Or, alternatively,
	*
	* b) Permission is hereby granted, free of charge, to any person
	* obtaining a copy of this software and associated documentation
	* files (the "Software"), to deal in the Software without
	* restriction, including without limitation the rights to use,
	* copy, modify, merge, publish, distribute, sublicense, and/or
	* sell copies of the Software, and to permit persons to whom the
	* Software is furnished to do so, subject to the following
	* conditions:
	*
	* The above copyright notice and this permission notice shall be
	* included in all copies or substantial portions of the Software.
	*
	* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
	* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
	* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
	* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
	* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
	* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
	* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
	* OTHER DEALINGS IN THE SOFTWARE.
	*/

	#include <dt-bindings/interrupt-controller/arm-gic.h>

	/ {
	model = "Marvell Armada 37xx SoC";
	compatible = "marvell,armada3700";
	interrupt-parent = <&gic>;
	#address-cells = <2>;
	#size-cells = <2>;

	aliases {
	serial0 = &uart0;
	};

	cpus {
	#address-cells = <1>;
	#size-cells = <0>;
	cpu@0 {
	device_type = "cpu";
	compatible = "arm,cortex-a53", "arm,armv8";
	reg = <0>;
	enable-method = "psci";
	};
	};

	psci {
	compatible = "arm,psci-0.2";
	method = "smc";
	};

	timer {
	compatible = "arm,armv8-timer";
	interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>;
	};

	soc {
	compatible = "simple-bus";
	#address-cells = <2>;
	#size-cells = <2>;
	ranges;

	internal-regs@d0000000 {
	#address-cells = <1>;
	#size-cells = <1>;
	compatible = "simple-bus";
	/* 32M internal register @ 0xd000_0000 */
	ranges = <0x0 0x0 0xd0000000 0x2000000>;

	spi0: spi@10600 {
	compatible = "marvell,armada-3700-spi";
	#address-cells = <1>;
	#size-cells = <0>;
	reg = <0x10600 0xA00>;
	clocks = <&nb_periph_clk 7>;
	interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
	num-cs = <4>;
	status = "disabled";
	};

	i2c0: i2c@11000 {
	compatible = "marvell,armada-3700-i2c";
	reg = <0x11000 0x24>;
	#address-cells = <1>;
	#size-cells = <0>;
	clocks = <&nb_periph_clk 10>;
	interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
	mrvl,i2c-fast-mode;
	status = "disabled";
	};

	i2c1: i2c@11080 {
	compatible = "marvell,armada-3700-i2c";
	reg = <0x11080 0x24>;
	#address-cells = <1>;
	#size-cells = <0>;
	clocks = <&nb_periph_clk 9>;
	interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
	mrvl,i2c-fast-mode;
	status = "disabled";
	};

	uart0: serial@12000 {
	compatible = "marvell,armada-3700-uart";
	reg = <0x12000 0x400>;
	interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
	status = "disabled";
	};

	nb_periph_clk: nb-periph-clk@13000 {
	compatible = "marvell,armada-3700-periph-clock-nb";
	reg = <0x13000 0x100>;
	clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>,
	<&tbg 3>, <&xtalclk>;
	#clock-cells = <1>;
	};

	sb_periph_clk: sb-periph-clk@18000 {
	compatible = "marvell,armada-3700-periph-clock-sb";
	reg = <0x18000 0x100>;
	clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>,
	<&tbg 3>, <&xtalclk>;
	#clock-cells = <1>;
	};

	tbg: tbg@13200 {
	compatible = "marvell,armada-3700-tbg-clock";
	reg = <0x13200 0x100>;
	clocks = <&xtalclk>;
	#clock-cells = <1>;
	};

	pinctrl_nb: pinctrl@13800 {
	compatible = "marvell,armada3710-nb-pinctrl",
	"syscon", "simple-mfd";
	reg = <0x13800 0x100>, <0x13C00 0x20>;
	gpionb: gpio {
	#gpio-cells = <2>;
	gpio-ranges = <&pinctrl_nb 0 0 36>;
	gpio-controller;
	interrupts =
	<GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;

	};

	xtalclk: xtal-clk {
	compatible = "marvell,armada-3700-xtal-clock";
	clock-output-names = "xtal";
	#clock-cells = <0>;
	};

	spi_quad_pins: spi-quad-pins {
	groups = "spi_quad";
	function = "spi";
	};

	i2c1_pins: i2c1-pins {
	groups = "i2c1";
	function = "i2c";
	};

	i2c2_pins: i2c2-pins {
	groups = "i2c2";
	function = "i2c";
	};

	uart1_pins: uart1-pins {
	groups = "uart1";
	function = "uart";
	};

	uart2_pins: uart2-pins {
	groups = "uart2";
	function = "uart";
	};
	};

	pinctrl_sb: pinctrl@18800 {
	compatible = "marvell,armada3710-sb-pinctrl",
	"syscon", "simple-mfd";
	reg = <0x18800 0x100>, <0x18C00 0x20>;
	gpiosb: gpio {
	#gpio-cells = <2>;
	gpio-ranges = <&pinctrl_sb 0 0 30>;
	gpio-controller;
	interrupts =
	<GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
	<GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
	};

	rgmii_pins: mii-pins {
	groups = "rgmii";
	function = "mii";
	};

	};

	eth0: ethernet@30000 {
	compatible = "marvell,armada-3700-neta";
	reg = <0x30000 0x4000>;
	interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&sb_periph_clk 8>;
	status = "disabled";
	};

	mdio: mdio@32004 {
	#address-cells = <1>;
	#size-cells = <0>;
	compatible = "marvell,orion-mdio";
	reg = <0x32004 0x4>;
	};

	eth1: ethernet@40000 {
	compatible = "marvell,armada-3700-neta";
	reg = <0x40000 0x4000>;
	interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&sb_periph_clk 7>;
	status = "disabled";
	};

	usb3: usb@58000 {
	compatible = "marvell,armada3700-xhci",
	"generic-xhci";
	reg = <0x58000 0x4000>;
	interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&sb_periph_clk 12>;
	status = "disabled";
	};

	usb2: usb@5e000 {
	compatible = "marvell,armada-3700-ehci";
	reg = <0x5e000 0x2000>;
	interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
	status = "disabled";
	};

	xor@60900 {
	compatible = "marvell,armada-3700-xor";
	reg = <0x60900 0x100>,
	<0x60b00 0x100>;

	xor10 {
	interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
	};
	xor11 {
	interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
	};
	};

	sdhci1: sdhci@d0000 {
	compatible = "marvell,armada-3700-sdhci",
	"marvell,sdhci-xenon";
	reg = <0xd0000 0x300>,
	<0x1e808 0x4>;
	interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&nb_periph_clk 0>;
	clock-names = "core";
	status = "disabled";
	};

	sdhci0: sdhci@d8000 {
	compatible = "marvell,armada-3700-sdhci",
	"marvell,sdhci-xenon";
	reg = <0xd8000 0x300>,
	<0x17808 0x4>;
	interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
	clocks = <&nb_periph_clk 0>;
	clock-names = "core";
	status = "disabled";
	};

	sata: sata@e0000 {
	compatible = "marvell,armada-3700-ahci";
	reg = <0xe0000 0x2000>;
	interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
	status = "disabled";
	};

	gic: interrupt-controller@1d00000 {
	compatible = "arm,gic-v3";
	#interrupt-cells = <3>;
	interrupt-controller;
	reg = <0x1d00000 0x10000>, /* GICD */
	<0x1d40000 0x40000>; /* GICR */
	};
	};

	pcie0: pcie@d0070000 {
	compatible = "marvell,armada-3700-pcie";
	device_type = "pci";
	status = "disabled";
	reg = <0 0xd0070000 0 0x20000>;
	#address-cells = <3>;
	#size-cells = <2>;
	bus-range = <0x00 0xff>;
	interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
	#interrupt-cells = <1>;
	msi-parent = <&pcie0>;
	msi-controller;
	ranges = <0x82000000 0 0xe8000000 0 0xe8000000 0 0x1000000 /* Port 0 MEM */
	0x81000000 0 0xe9000000 0 0xe9000000 0 0x10000>; /* Port 0 IO*/
	interrupt-map-mask = <0 0 0 7>;
	interrupt-map = <0 0 0 1 &pcie_intc 0>,
	<0 0 0 2 &pcie_intc 1>,
	<0 0 0 3 &pcie_intc 2>,
	<0 0 0 4 &pcie_intc 3>;
	pcie_intc: interrupt-controller {
	interrupt-controller;
	#interrupt-cells = <1>;
	};
	};
	};
	};