| /* |
| * linux/fs/ext4/file.c |
| * |
| * Copyright (C) 1992, 1993, 1994, 1995 |
| * Remy Card (card@masi.ibp.fr) |
| * Laboratoire MASI - Institut Blaise Pascal |
| * Universite Pierre et Marie Curie (Paris VI) |
| * |
| * from |
| * |
| * linux/fs/minix/file.c |
| * |
| * Copyright (C) 1991, 1992 Linus Torvalds |
| * |
| * ext4 fs regular file handling primitives |
| * |
| * 64-bit file support on 64-bit platforms by Jakub Jelinek |
| * (jj@sunsite.ms.mff.cuni.cz) |
| */ |
| |
| #include <linux/time.h> |
| #include <linux/fs.h> |
| #include <linux/jbd2.h> |
| #include <linux/mount.h> |
| #include <linux/path.h> |
| #include <linux/quotaops.h> |
| #include "ext4.h" |
| #include "ext4_jbd2.h" |
| #include "xattr.h" |
| #include "acl.h" |
| |
| /* |
| * Called when an inode is released. Note that this is different |
| * from ext4_file_open: open gets called at every open, but release |
| * gets called only when /all/ the files are closed. |
| */ |
| static int ext4_release_file(struct inode *inode, struct file *filp) |
| { |
| if (ext4_test_inode_state(inode, EXT4_STATE_DA_ALLOC_CLOSE)) { |
| ext4_alloc_da_blocks(inode); |
| ext4_clear_inode_state(inode, EXT4_STATE_DA_ALLOC_CLOSE); |
| } |
| /* if we are the last writer on the inode, drop the block reservation */ |
| if ((filp->f_mode & FMODE_WRITE) && |
| (atomic_read(&inode->i_writecount) == 1) && |
| !EXT4_I(inode)->i_reserved_data_blocks) |
| { |
| down_write(&EXT4_I(inode)->i_data_sem); |
| ext4_discard_preallocations(inode); |
| up_write(&EXT4_I(inode)->i_data_sem); |
| } |
| if (is_dx(inode) && filp->private_data) |
| ext4_htree_free_dir_info(filp->private_data); |
| |
| return 0; |
| } |
| |
| void ext4_unwritten_wait(struct inode *inode) |
| { |
| wait_queue_head_t *wq = ext4_ioend_wq(inode); |
| |
| wait_event(*wq, (atomic_read(&EXT4_I(inode)->i_unwritten) == 0)); |
| } |
| |
| /* |
| * This tests whether the IO in question is block-aligned or not. |
| * Ext4 utilizes unwritten extents when hole-filling during direct IO, and they |
| * are converted to written only after the IO is complete. Until they are |
| * mapped, these blocks appear as holes, so dio_zero_block() will assume that |
| * it needs to zero out portions of the start and/or end block. If 2 AIO |
| * threads are at work on the same unwritten block, they must be synchronized |
| * or one thread will zero the other's data, causing corruption. |
| */ |
| static int |
| ext4_unaligned_aio(struct inode *inode, const struct iovec *iov, |
| unsigned long nr_segs, loff_t pos) |
| { |
| struct super_block *sb = inode->i_sb; |
| int blockmask = sb->s_blocksize - 1; |
| size_t count = iov_length(iov, nr_segs); |
| loff_t final_size = pos + count; |
| |
| if (pos >= inode->i_size) |
| return 0; |
| |
| if ((pos & blockmask) || (final_size & blockmask)) |
| return 1; |
| |
| return 0; |
| } |
| |
| static ssize_t |
| ext4_file_dio_write(struct kiocb *iocb, const struct iovec *iov, |
| unsigned long nr_segs, loff_t pos) |
| { |
| struct file *file = iocb->ki_filp; |
| struct inode *inode = file->f_mapping->host; |
| struct blk_plug plug; |
| int unaligned_aio = 0; |
| ssize_t ret; |
| int overwrite = 0; |
| size_t length = iov_length(iov, nr_segs); |
| |
| if (ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS) && |
| !is_sync_kiocb(iocb)) |
| unaligned_aio = ext4_unaligned_aio(inode, iov, nr_segs, pos); |
| |
| /* Unaligned direct AIO must be serialized; see comment above */ |
| if (unaligned_aio) { |
| static unsigned long unaligned_warn_time; |
| |
| /* Warn about this once per day */ |
| if (printk_timed_ratelimit(&unaligned_warn_time, 60*60*24*HZ)) |
| ext4_msg(inode->i_sb, KERN_WARNING, |
| "Unaligned AIO/DIO on inode %ld by %s; " |
| "performance will be poor.", |
| inode->i_ino, current->comm); |
| mutex_lock(ext4_aio_mutex(inode)); |
| ext4_unwritten_wait(inode); |
| } |
| |
| BUG_ON(iocb->ki_pos != pos); |
| |
| mutex_lock(&inode->i_mutex); |
| blk_start_plug(&plug); |
| |
| iocb->private = &overwrite; |
| |
| /* check whether we do a DIO overwrite or not */ |
| if (ext4_should_dioread_nolock(inode) && !unaligned_aio && |
| !file->f_mapping->nrpages && pos + length <= i_size_read(inode)) { |
| struct ext4_map_blocks map; |
| unsigned int blkbits = inode->i_blkbits; |
| int err, len; |
| |
| map.m_lblk = pos >> blkbits; |
| map.m_len = (EXT4_BLOCK_ALIGN(pos + length, blkbits) >> blkbits) |
| - map.m_lblk; |
| len = map.m_len; |
| |
| err = ext4_map_blocks(NULL, inode, &map, 0); |
| /* |
| * 'err==len' means that all of blocks has been preallocated no |
| * matter they are initialized or not. For excluding |
| * uninitialized extents, we need to check m_flags. There are |
| * two conditions that indicate for initialized extents. |
| * 1) If we hit extent cache, EXT4_MAP_MAPPED flag is returned; |
| * 2) If we do a real lookup, non-flags are returned. |
| * So we should check these two conditions. |
| */ |
| if (err == len && (map.m_flags & EXT4_MAP_MAPPED)) |
| overwrite = 1; |
| } |
| |
| ret = __generic_file_aio_write(iocb, iov, nr_segs, &iocb->ki_pos); |
| mutex_unlock(&inode->i_mutex); |
| |
| if (ret > 0 || ret == -EIOCBQUEUED) { |
| ssize_t err; |
| |
| err = generic_write_sync(file, pos, ret); |
| if (err < 0 && ret > 0) |
| ret = err; |
| } |
| blk_finish_plug(&plug); |
| |
| if (unaligned_aio) |
| mutex_unlock(ext4_aio_mutex(inode)); |
| |
| return ret; |
| } |
| |
| static ssize_t |
| ext4_file_write(struct kiocb *iocb, const struct iovec *iov, |
| unsigned long nr_segs, loff_t pos) |
| { |
| struct inode *inode = iocb->ki_filp->f_path.dentry->d_inode; |
| ssize_t ret; |
| |
| /* |
| * If we have encountered a bitmap-format file, the size limit |
| * is smaller than s_maxbytes, which is for extent-mapped files. |
| */ |
| |
| if (!(ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS))) { |
| struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb); |
| size_t length = iov_length(iov, nr_segs); |
| |
| if ((pos > sbi->s_bitmap_maxbytes || |
| (pos == sbi->s_bitmap_maxbytes && length > 0))) |
| return -EFBIG; |
| |
| if (pos + length > sbi->s_bitmap_maxbytes) { |
| nr_segs = iov_shorten((struct iovec *)iov, nr_segs, |
| sbi->s_bitmap_maxbytes - pos); |
| } |
| } |
| |
| if (unlikely(iocb->ki_filp->f_flags & O_DIRECT)) |
| ret = ext4_file_dio_write(iocb, iov, nr_segs, pos); |
| else |
| ret = generic_file_aio_write(iocb, iov, nr_segs, pos); |
| |
| return ret; |
| } |
| |
| static const struct vm_operations_struct ext4_file_vm_ops = { |
| .fault = filemap_fault, |
| .page_mkwrite = ext4_page_mkwrite, |
| .remap_pages = generic_file_remap_pages, |
| }; |
| |
| static int ext4_file_mmap(struct file *file, struct vm_area_struct *vma) |
| { |
| struct address_space *mapping = file->f_mapping; |
| |
| if (!mapping->a_ops->readpage) |
| return -ENOEXEC; |
| file_accessed(file); |
| vma->vm_ops = &ext4_file_vm_ops; |
| return 0; |
| } |
| |
| static int ext4_file_open(struct inode * inode, struct file * filp) |
| { |
| struct super_block *sb = inode->i_sb; |
| struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb); |
| struct ext4_inode_info *ei = EXT4_I(inode); |
| struct vfsmount *mnt = filp->f_path.mnt; |
| struct path path; |
| char buf[64], *cp; |
| |
| if (unlikely(!(sbi->s_mount_flags & EXT4_MF_MNTDIR_SAMPLED) && |
| !(sb->s_flags & MS_RDONLY))) { |
| sbi->s_mount_flags |= EXT4_MF_MNTDIR_SAMPLED; |
| /* |
| * Sample where the filesystem has been mounted and |
| * store it in the superblock for sysadmin convenience |
| * when trying to sort through large numbers of block |
| * devices or filesystem images. |
| */ |
| memset(buf, 0, sizeof(buf)); |
| path.mnt = mnt; |
| path.dentry = mnt->mnt_root; |
| cp = d_path(&path, buf, sizeof(buf)); |
| if (!IS_ERR(cp)) { |
| handle_t *handle; |
| int err; |
| |
| handle = ext4_journal_start_sb(sb, 1); |
| if (IS_ERR(handle)) |
| return PTR_ERR(handle); |
| err = ext4_journal_get_write_access(handle, sbi->s_sbh); |
| if (err) { |
| ext4_journal_stop(handle); |
| return err; |
| } |
| strlcpy(sbi->s_es->s_last_mounted, cp, |
| sizeof(sbi->s_es->s_last_mounted)); |
| ext4_handle_dirty_super(handle, sb); |
| ext4_journal_stop(handle); |
| } |
| } |
| /* |
| * Set up the jbd2_inode if we are opening the inode for |
| * writing and the journal is present |
| */ |
| if (sbi->s_journal && !ei->jinode && (filp->f_mode & FMODE_WRITE)) { |
| struct jbd2_inode *jinode = jbd2_alloc_inode(GFP_KERNEL); |
| |
| spin_lock(&inode->i_lock); |
| if (!ei->jinode) { |
| if (!jinode) { |
| spin_unlock(&inode->i_lock); |
| return -ENOMEM; |
| } |
| ei->jinode = jinode; |
| jbd2_journal_init_jbd_inode(ei->jinode, inode); |
| jinode = NULL; |
| } |
| spin_unlock(&inode->i_lock); |
| if (unlikely(jinode != NULL)) |
| jbd2_free_inode(jinode); |
| } |
| return dquot_file_open(inode, filp); |
| } |
| |
| /* |
| * ext4_llseek() handles both block-mapped and extent-mapped maxbytes values |
| * by calling generic_file_llseek_size() with the appropriate maxbytes |
| * value for each. |
| */ |
| loff_t ext4_llseek(struct file *file, loff_t offset, int origin) |
| { |
| struct inode *inode = file->f_mapping->host; |
| loff_t maxbytes; |
| |
| if (!(ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS))) |
| maxbytes = EXT4_SB(inode->i_sb)->s_bitmap_maxbytes; |
| else |
| maxbytes = inode->i_sb->s_maxbytes; |
| |
| return generic_file_llseek_size(file, offset, origin, |
| maxbytes, i_size_read(inode)); |
| } |
| |
| const struct file_operations ext4_file_operations = { |
| .llseek = ext4_llseek, |
| .read = do_sync_read, |
| .write = do_sync_write, |
| .aio_read = generic_file_aio_read, |
| .aio_write = ext4_file_write, |
| .unlocked_ioctl = ext4_ioctl, |
| #ifdef CONFIG_COMPAT |
| .compat_ioctl = ext4_compat_ioctl, |
| #endif |
| .mmap = ext4_file_mmap, |
| .open = ext4_file_open, |
| .release = ext4_release_file, |
| .fsync = ext4_sync_file, |
| .splice_read = generic_file_splice_read, |
| .splice_write = generic_file_splice_write, |
| .fallocate = ext4_fallocate, |
| }; |
| |
| const struct inode_operations ext4_file_inode_operations = { |
| .setattr = ext4_setattr, |
| .getattr = ext4_getattr, |
| #ifdef CONFIG_EXT4_FS_XATTR |
| .setxattr = generic_setxattr, |
| .getxattr = generic_getxattr, |
| .listxattr = ext4_listxattr, |
| .removexattr = generic_removexattr, |
| #endif |
| .get_acl = ext4_get_acl, |
| .fiemap = ext4_fiemap, |
| }; |
| |