[media] cx88: make core less verbose
Along the time, several debug messages were added at cx88-cards.
While those are still useful to track some troubles with
tuners, they're too verbose:
[ 5768.281801] cx88[0]: Calling XC2028/3028 callback
[ 5768.287388] cx88[0]: Calling XC2028/3028 callback
[ 5768.292575] cx88[0]: Calling XC2028/3028 callback
[ 5768.299408] cx88[0]: Calling XC2028/3028 callback
[ 5768.306244] cx88[0]: Calling XC2028/3028 callback
...
and, most of the time, useless.
So, disable them, except if core_debug modprobe parameter
is used.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
diff --git a/drivers/media/pci/cx88/cx88-cards.c b/drivers/media/pci/cx88/cx88-cards.c
index 07b700a..a87a0e1 100644
--- a/drivers/media/pci/cx88/cx88-cards.c
+++ b/drivers/media/pci/cx88/cx88-cards.c
@@ -59,6 +59,11 @@
#define err_printk(core, fmt, arg...) \
printk(KERN_ERR "%s: " fmt, core->name , ## arg)
+#define dprintk(level,fmt, arg...) do { \
+ if (cx88_core_debug >= level) \
+ printk(KERN_DEBUG "%s: " fmt, core->name , ## arg); \
+ } while(0)
+
/* ------------------------------------------------------------------ */
/* board config info */
@@ -3134,7 +3139,7 @@
case XC2028_TUNER_RESET:
switch (INPUT(core->input).type) {
case CX88_RADIO:
- info_printk(core, "setting GPIO to radio!\n");
+ dprintk(1, "setting GPIO to radio!\n");
cx_write(MO_GP0_IO, 0x4ff);
mdelay(250);
cx_write(MO_GP2_IO, 0xff);
@@ -3142,7 +3147,7 @@
break;
case CX88_VMUX_DVB: /* Digital TV*/
default: /* Analog TV */
- info_printk(core, "setting GPIO to TV!\n");
+ dprintk(1, "setting GPIO to TV!\n");
break;
}
cx_write(MO_GP1_IO, 0x101010);
@@ -3200,8 +3205,7 @@
not having any tuning at all. */
return 0;
} else {
- err_printk(core, "xc5000: unknown tuner "
- "callback command.\n");
+ dprintk(1, "xc5000: unknown tuner callback command.\n");
return -EINVAL;
}
break;
@@ -3212,8 +3216,7 @@
cx_set(MO_GP0_IO, 0x00000010);
return 0;
} else {
- printk(KERN_ERR
- "xc5000: unknown tuner callback command.\n");
+ dprintk(1, "xc5000: unknown tuner callback command.\n");
return -EINVAL;
}
break;
@@ -3243,13 +3246,13 @@
switch (core->board.tuner_type) {
case TUNER_XC2028:
- info_printk(core, "Calling XC2028/3028 callback\n");
+ dprintk(1, "Calling XC2028/3028 callback\n");
return cx88_xc2028_tuner_callback(core, command, arg);
case TUNER_XC4000:
- info_printk(core, "Calling XC4000 callback\n");
+ dprintk(1, "Calling XC4000 callback\n");
return cx88_xc4000_tuner_callback(core, command, arg);
case TUNER_XC5000:
- info_printk(core, "Calling XC5000 callback\n");
+ dprintk(1, "Calling XC5000 callback\n");
return cx88_xc5000_tuner_callback(core, command, arg);
}
err_printk(core, "Error: Calling callback for tuner %d\n",
@@ -3590,8 +3593,8 @@
memset(&xc2028_cfg, 0, sizeof(xc2028_cfg));
xc2028_cfg.tuner = TUNER_XC2028;
xc2028_cfg.priv = &ctl;
- info_printk(core, "Asking xc2028/3028 to load firmware %s\n",
- ctl.fname);
+ dprintk(1, "Asking xc2028/3028 to load firmware %s\n",
+ ctl.fname);
call_all(core, tuner, s_config, &xc2028_cfg);
}
call_all(core, core, s_power, 0);
@@ -3760,8 +3763,8 @@
if (radio[core->nr] != UNSET)
core->board.radio_type = radio[core->nr];
- info_printk(core, "TV tuner type %d, Radio tuner type %d\n",
- core->board.tuner_type, core->board.radio_type);
+ dprintk(1, "TV tuner type %d, Radio tuner type %d\n",
+ core->board.tuner_type, core->board.radio_type);
/* init hardware */
cx88_reset(core);
diff --git a/drivers/media/pci/cx88/cx88-core.c b/drivers/media/pci/cx88/cx88-core.c
index 39f095c..c8f3dcc 100644
--- a/drivers/media/pci/cx88/cx88-core.c
+++ b/drivers/media/pci/cx88/cx88-core.c
@@ -48,9 +48,9 @@
/* ------------------------------------------------------------------ */
-static unsigned int core_debug;
-module_param(core_debug,int,0644);
-MODULE_PARM_DESC(core_debug,"enable debug messages [core]");
+unsigned int cx88_core_debug;
+module_param_named(core_debug, cx88_core_debug, int, 0644);
+MODULE_PARM_DESC(core_debug, "enable debug messages [core]");
static unsigned int nicam;
module_param(nicam,int,0644);
@@ -60,8 +60,10 @@
module_param(nocomb,int,0644);
MODULE_PARM_DESC(nocomb,"disable comb filter");
-#define dprintk(level,fmt, arg...) if (core_debug >= level) \
- printk(KERN_DEBUG "%s: " fmt, core->name , ## arg)
+#define dprintk(level,fmt, arg...) do { \
+ if (cx88_core_debug >= level) \
+ printk(KERN_DEBUG "%s: " fmt, core->name , ## arg); \
+ } while(0)
static unsigned int cx88_devcount;
static LIST_HEAD(cx88_devlist);
diff --git a/drivers/media/pci/cx88/cx88.h b/drivers/media/pci/cx88/cx88.h
index 4e29c9d..51ce2c0 100644
--- a/drivers/media/pci/cx88/cx88.h
+++ b/drivers/media/pci/cx88/cx88.h
@@ -618,6 +618,8 @@
/* ----------------------------------------------------------- */
/* cx88-core.c */
+extern unsigned int cx88_core_debug;
+
extern void cx88_print_irqbits(const char *name, const char *tag, const char *strings[],
int len, u32 bits, u32 mask);