x86/mm/pat: Add support of non-default PAT MSR setting
In preparation for fixing a regression caused by:
9cd25aac1f44 ("x86/mm/pat: Emulate PAT when it is disabled")'
... PAT needs to support a case that PAT MSR is initialized with a
non-default value.
When pat_init() is called and PAT is disabled, it initializes the
PAT table with the BIOS default value. Xen, however, sets PAT MSR
with a non-default value to enable WC. This causes inconsistency
between the PAT table and PAT MSR when PAT is set to disable on Xen.
Change pat_init() to handle the PAT disable cases properly. Add
init_cache_modes() to handle two cases when PAT is set to disable.
1. CPU supports PAT: Set PAT table to be consistent with PAT MSR.
2. CPU does not support PAT: Set PAT table to be consistent with
PWT and PCD bits in a PTE.
Note, __init_cache_modes(), renamed from pat_init_cache_modes(),
will be changed to a static function in a later patch.
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Toshi Kani <toshi.kani@hp.com>
Cc: elliott@hpe.com
Cc: konrad.wilk@oracle.com
Cc: paul.gortmaker@windriver.com
Cc: xen-devel@lists.xenproject.org
Link: http://lkml.kernel.org/r/1458769323-24491-2-git-send-email-toshi.kani@hpe.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c
index faec01e..b4663885 100644
--- a/arch/x86/mm/pat.c
+++ b/arch/x86/mm/pat.c
@@ -181,7 +181,7 @@
* configuration.
* Using lower indices is preferred, so we start with highest index.
*/
-void pat_init_cache_modes(u64 pat)
+void __init_cache_modes(u64 pat)
{
enum page_cache_mode cache;
char pat_msg[33];
@@ -207,9 +207,6 @@
return;
}
- if (!pat_enabled())
- goto done;
-
rdmsrl(MSR_IA32_CR_PAT, tmp_pat);
if (!tmp_pat) {
pat_disable("PAT MSR is 0, disabled.");
@@ -218,15 +215,11 @@
wrmsrl(MSR_IA32_CR_PAT, pat);
-done:
- pat_init_cache_modes(pat);
+ __init_cache_modes(pat);
}
static void pat_ap_init(u64 pat)
{
- if (!pat_enabled())
- return;
-
if (!cpu_has_pat) {
/*
* If this happens we are on a secondary CPU, but switched to
@@ -238,18 +231,32 @@
wrmsrl(MSR_IA32_CR_PAT, pat);
}
-void pat_init(void)
+static void init_cache_modes(void)
{
- u64 pat;
- struct cpuinfo_x86 *c = &boot_cpu_data;
+ u64 pat = 0;
+ static int init_cm_done;
- if (!pat_enabled()) {
+ if (init_cm_done)
+ return;
+
+ if (boot_cpu_has(X86_FEATURE_PAT)) {
+ /*
+ * CPU supports PAT. Set PAT table to be consistent with
+ * PAT MSR. This case supports "nopat" boot option, and
+ * virtual machine environments which support PAT without
+ * MTRRs. In specific, Xen has unique setup to PAT MSR.
+ *
+ * If PAT MSR returns 0, it is considered invalid and emulates
+ * as No PAT.
+ */
+ rdmsrl(MSR_IA32_CR_PAT, pat);
+ }
+
+ if (!pat) {
/*
* No PAT. Emulate the PAT table that corresponds to the two
- * cache bits, PWT (Write Through) and PCD (Cache Disable). This
- * setup is the same as the BIOS default setup when the system
- * has PAT but the "nopat" boot option has been specified. This
- * emulated PAT table is used when MSR_IA32_CR_PAT returns 0.
+ * cache bits, PWT (Write Through) and PCD (Cache Disable).
+ * This setup is also the same as the BIOS default setup.
*
* PTE encoding:
*
@@ -266,10 +273,36 @@
*/
pat = PAT(0, WB) | PAT(1, WT) | PAT(2, UC_MINUS) | PAT(3, UC) |
PAT(4, WB) | PAT(5, WT) | PAT(6, UC_MINUS) | PAT(7, UC);
+ }
- } else if ((c->x86_vendor == X86_VENDOR_INTEL) &&
- (((c->x86 == 0x6) && (c->x86_model <= 0xd)) ||
- ((c->x86 == 0xf) && (c->x86_model <= 0x6)))) {
+ __init_cache_modes(pat);
+
+ init_cm_done = 1;
+}
+
+/**
+ * pat_init - Initialize PAT MSR and PAT table
+ *
+ * This function initializes PAT MSR and PAT table with an OS-defined value
+ * to enable additional cache attributes, WC and WT.
+ *
+ * This function must be called on all CPUs using the specific sequence of
+ * operations defined in Intel SDM. mtrr_rendezvous_handler() provides this
+ * procedure for PAT.
+ */
+void pat_init(void)
+{
+ u64 pat;
+ struct cpuinfo_x86 *c = &boot_cpu_data;
+
+ if (!pat_enabled()) {
+ init_cache_modes();
+ return;
+ }
+
+ if ((c->x86_vendor == X86_VENDOR_INTEL) &&
+ (((c->x86 == 0x6) && (c->x86_model <= 0xd)) ||
+ ((c->x86 == 0xf) && (c->x86_model <= 0x6)))) {
/*
* PAT support with the lower four entries. Intel Pentium 2,
* 3, M, and 4 are affected by PAT errata, which makes the