staging: comedi: amplc_pc263: Replace printk calls
Replace the printk calls with dev_info, dev_err, etc. There were some
consecutive printk calls without newlines which now snprintf into a
temporary buffer and this bit of code has been factored out into new
function pc263_report_attach().
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/drivers/staging/comedi/drivers/amplc_pc263.c b/drivers/staging/comedi/drivers/amplc_pc263.c
index 5d5d9a2..b504c43 100644
--- a/drivers/staging/comedi/drivers/amplc_pc263.c
+++ b/drivers/staging/comedi/drivers/amplc_pc263.c
@@ -163,12 +163,12 @@
}
/* No match found. */
if (bus || slot) {
- printk(KERN_ERR
- "comedi%d: error! no %s found at pci %02x:%02x!\n",
- dev->minor, thisboard->name, bus, slot);
+ dev_err(dev->class_dev,
+ "error! no %s found at pci %02x:%02x!\n",
+ thisboard->name, bus, slot);
} else {
- printk(KERN_ERR "comedi%d: error! no %s found!\n",
- dev->minor, thisboard->name);
+ dev_err(dev->class_dev, "error! no %s found!\n",
+ thisboard->name);
}
return -EIO;
}
@@ -176,12 +176,12 @@
* This function checks and requests an I/O region, reporting an error
* if there is a conflict.
*/
-static int pc263_request_region(unsigned minor, unsigned long from,
+static int pc263_request_region(struct comedi_device *dev, unsigned long from,
unsigned long extent)
{
if (!from || !request_region(from, extent, PC263_DRIVER_NAME)) {
- printk(KERN_ERR "comedi%d: I/O port conflict (%#lx,%lu)!\n",
- minor, from, extent);
+ dev_err(dev->class_dev, "I/O port conflict (%#lx,%lu)!\n",
+ from, extent);
return -EIO;
}
return 0;
@@ -206,6 +206,22 @@
return 2;
}
+static void pc263_report_attach(struct comedi_device *dev)
+{
+ char tmpbuf[40];
+
+ if (IS_ENABLED(CONFIG_COMEDI_AMPLC_PC263_ISA) &&
+ thisboard->bustype == isa_bustype)
+ snprintf(tmpbuf, sizeof(tmpbuf), "(base %#lx) ", dev->iobase);
+ else if (IS_ENABLED(CONFIG_COMEDI_AMPLC_PC263_PCI) &&
+ thisboard->bustype == pci_bustype)
+ snprintf(tmpbuf, sizeof(tmpbuf), "(pci %s) ",
+ pci_name(devpriv->pci_dev));
+ else
+ tmpbuf[0] = '\0';
+ dev_info(dev->class_dev, "%s %sattached\n", dev->board_name, tmpbuf);
+}
+
/*
* Attach is called by the Comedi core to configure the driver
* for a particular board. If you specified a board_name array
@@ -218,14 +234,13 @@
unsigned long iobase = 0;
int ret;
- printk(KERN_DEBUG "comedi%d: %s: attach\n", dev->minor,
- PC263_DRIVER_NAME);
+ dev_info(dev->class_dev, PC263_DRIVER_NAME ": attach\n");
/* Process options and reserve resources according to bus type. */
if (IS_ENABLED(CONFIG_COMEDI_AMPLC_PC263_ISA) &&
thisboard->bustype == isa_bustype) {
iobase = it->options[0];
- ret = pc263_request_region(dev->minor, iobase, PC263_IO_SIZE);
+ ret = pc263_request_region(dev, iobase, PC263_IO_SIZE);
if (ret < 0)
return ret;
} else if (IS_ENABLED(CONFIG_COMEDI_AMPLC_PC263_PCI) &&
@@ -235,8 +250,7 @@
ret = alloc_private(dev, sizeof(struct pc263_private));
if (ret < 0) {
- printk(KERN_ERR "comedi%d: error! out of memory!\n",
- dev->minor);
+ dev_err(dev->class_dev, "error! out of memory!\n");
return ret;
}
bus = it->options[0];
@@ -247,17 +261,14 @@
devpriv->pci_dev = pci_dev;
ret = comedi_pci_enable(pci_dev, PC263_DRIVER_NAME);
if (ret < 0) {
- printk(KERN_ERR
- "comedi%d: error! cannot enable PCI device and "
- "request regions!\n",
- dev->minor);
+ dev_err(dev->class_dev,
+ "error! cannot enable PCI device and request regions!\n");
return ret;
}
iobase = pci_resource_start(pci_dev, 2);
} else {
- printk(KERN_ERR
- "comedi%d: %s: BUG! cannot determine board type!\n",
- dev->minor, PC263_DRIVER_NAME);
+ dev_err(dev->class_dev, PC263_DRIVER_NAME
+ ": BUG! cannot determine board type!\n");
return -EINVAL;
}
@@ -266,8 +277,7 @@
ret = alloc_subdevices(dev, 1);
if (ret < 0) {
- printk(KERN_ERR "comedi%d: error! out of memory!\n",
- dev->minor);
+ dev_err(dev->class_dev, "error! out of memory!\n");
return ret;
}
@@ -282,16 +292,7 @@
/* read initial relay state */
s->state = inb(dev->iobase) | (inb(dev->iobase + 1) << 8);
- printk(KERN_INFO "comedi%d: %s ", dev->minor, dev->board_name);
- if (IS_ENABLED(CONFIG_COMEDI_AMPLC_PC263_ISA) &&
- thisboard->bustype == isa_bustype)
- printk("(base %#lx) ", iobase);
- else if (IS_ENABLED(CONFIG_COMEDI_AMPLC_PC263_PCI) &&
- thisboard->bustype == pci_bustype)
- printk("(pci %s) ", pci_name(devpriv->pci_dev));
-
- printk("attached\n");
-
+ pc263_report_attach(dev);
return 1;
}