| /******************************************************************************* |
| |
| Intel 10 Gigabit PCI Express Linux driver |
| Copyright(c) 1999 - 2015 Intel Corporation. |
| |
| This program is free software; you can redistribute it and/or modify it |
| under the terms and conditions of the GNU General Public License, |
| version 2, as published by the Free Software Foundation. |
| |
| This program is distributed in the hope it will be useful, but WITHOUT |
| ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for |
| more details. |
| |
| You should have received a copy of the GNU General Public License along with |
| this program; if not, write to the Free Software Foundation, Inc., |
| 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. |
| |
| The full GNU General Public License is included in this distribution in |
| the file called "COPYING". |
| |
| Contact Information: |
| Linux NICS <linux.nics@intel.com> |
| e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> |
| Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 |
| |
| *******************************************************************************/ |
| |
| #include <linux/types.h> |
| #include <linux/module.h> |
| #include <linux/pci.h> |
| #include <linux/netdevice.h> |
| #include <linux/vmalloc.h> |
| #include <linux/string.h> |
| #include <linux/in.h> |
| #include <linux/interrupt.h> |
| #include <linux/ip.h> |
| #include <linux/tcp.h> |
| #include <linux/sctp.h> |
| #include <linux/pkt_sched.h> |
| #include <linux/ipv6.h> |
| #include <linux/slab.h> |
| #include <net/checksum.h> |
| #include <net/ip6_checksum.h> |
| #include <linux/etherdevice.h> |
| #include <linux/ethtool.h> |
| #include <linux/if.h> |
| #include <linux/if_vlan.h> |
| #include <linux/if_macvlan.h> |
| #include <linux/if_bridge.h> |
| #include <linux/prefetch.h> |
| #include <scsi/fc/fc_fcoe.h> |
| #include <net/vxlan.h> |
| #include <net/pkt_cls.h> |
| #include <net/tc_act/tc_gact.h> |
| |
| #ifdef CONFIG_OF |
| #include <linux/of_net.h> |
| #endif |
| |
| #ifdef CONFIG_SPARC |
| #include <asm/idprom.h> |
| #include <asm/prom.h> |
| #endif |
| |
| #include "ixgbe.h" |
| #include "ixgbe_common.h" |
| #include "ixgbe_dcb_82599.h" |
| #include "ixgbe_sriov.h" |
| #include "ixgbe_model.h" |
| |
| char ixgbe_driver_name[] = "ixgbe"; |
| static const char ixgbe_driver_string[] = |
| "Intel(R) 10 Gigabit PCI Express Network Driver"; |
| #ifdef IXGBE_FCOE |
| char ixgbe_default_device_descr[] = |
| "Intel(R) 10 Gigabit Network Connection"; |
| #else |
| static char ixgbe_default_device_descr[] = |
| "Intel(R) 10 Gigabit Network Connection"; |
| #endif |
| #define DRV_VERSION "4.2.1-k" |
| const char ixgbe_driver_version[] = DRV_VERSION; |
| static const char ixgbe_copyright[] = |
| "Copyright (c) 1999-2015 Intel Corporation."; |
| |
| static const char ixgbe_overheat_msg[] = "Network adapter has been stopped because it has over heated. Restart the computer. If the problem persists, power off the system and replace the adapter"; |
| |
| static const struct ixgbe_info *ixgbe_info_tbl[] = { |
| [board_82598] = &ixgbe_82598_info, |
| [board_82599] = &ixgbe_82599_info, |
| [board_X540] = &ixgbe_X540_info, |
| [board_X550] = &ixgbe_X550_info, |
| [board_X550EM_x] = &ixgbe_X550EM_x_info, |
| }; |
| |
| /* ixgbe_pci_tbl - PCI Device ID Table |
| * |
| * Wildcard entries (PCI_ANY_ID) should come last |
| * Last entry must be all 0s |
| * |
| * { Vendor ID, Device ID, SubVendor ID, SubDevice ID, |
| * Class, Class Mask, private data (not used) } |
| */ |
| static const struct pci_device_id ixgbe_pci_tbl[] = { |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598), board_82598 }, |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598AF_DUAL_PORT), board_82598 }, |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598AF_SINGLE_PORT), board_82598 }, |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598AT), board_82598 }, |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598AT2), board_82598 }, |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598EB_CX4), board_82598 }, |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598_CX4_DUAL_PORT), board_82598 }, |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598_DA_DUAL_PORT), board_82598 }, |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM), board_82598 }, |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598EB_XF_LR), board_82598 }, |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598EB_SFP_LOM), board_82598 }, |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598_BX), board_82598 }, |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_KX4), board_82599 }, |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_XAUI_LOM), board_82599 }, |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_KR), board_82599 }, |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_SFP), board_82599 }, |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_SFP_EM), board_82599 }, |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_KX4_MEZZ), board_82599 }, |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_CX4), board_82599 }, |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_BACKPLANE_FCOE), board_82599 }, |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_SFP_FCOE), board_82599 }, |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_T3_LOM), board_82599 }, |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_COMBO_BACKPLANE), board_82599 }, |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X540T), board_X540 }, |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_SFP_SF2), board_82599 }, |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_LS), board_82599 }, |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_QSFP_SF_QP), board_82599 }, |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599EN_SFP), board_82599 }, |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_SFP_SF_QP), board_82599 }, |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X540T1), board_X540 }, |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X550T), board_X550}, |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X550EM_X_KX4), board_X550EM_x}, |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X550EM_X_KR), board_X550EM_x}, |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X550EM_X_10G_T), board_X550EM_x}, |
| {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X550EM_X_SFP), board_X550EM_x}, |
| /* required last entry */ |
| {0, } |
| }; |
| MODULE_DEVICE_TABLE(pci, ixgbe_pci_tbl); |
| |
| #ifdef CONFIG_IXGBE_DCA |
| static int ixgbe_notify_dca(struct notifier_block *, unsigned long event, |
| void *p); |
| static struct notifier_block dca_notifier = { |
| .notifier_call = ixgbe_notify_dca, |
| .next = NULL, |
| .priority = 0 |
| }; |
| #endif |
| |
| #ifdef CONFIG_PCI_IOV |
| static unsigned int max_vfs; |
| module_param(max_vfs, uint, 0); |
| MODULE_PARM_DESC(max_vfs, |
| "Maximum number of virtual functions to allocate per physical function - default is zero and maximum value is 63. (Deprecated)"); |
| #endif /* CONFIG_PCI_IOV */ |
| |
| static unsigned int allow_unsupported_sfp; |
| module_param(allow_unsupported_sfp, uint, 0); |
| MODULE_PARM_DESC(allow_unsupported_sfp, |
| "Allow unsupported and untested SFP+ modules on 82599-based adapters"); |
| |
| #define DEFAULT_MSG_ENABLE (NETIF_MSG_DRV|NETIF_MSG_PROBE|NETIF_MSG_LINK) |
| static int debug = -1; |
| module_param(debug, int, 0); |
| MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)"); |
| |
| MODULE_AUTHOR("Intel Corporation, <linux.nics@intel.com>"); |
| MODULE_DESCRIPTION("Intel(R) 10 Gigabit PCI Express Network Driver"); |
| MODULE_LICENSE("GPL"); |
| MODULE_VERSION(DRV_VERSION); |
| |
| static struct workqueue_struct *ixgbe_wq; |
| |
| static bool ixgbe_check_cfg_remove(struct ixgbe_hw *hw, struct pci_dev *pdev); |
| |
| static int ixgbe_read_pci_cfg_word_parent(struct ixgbe_adapter *adapter, |
| u32 reg, u16 *value) |
| { |
| struct pci_dev *parent_dev; |
| struct pci_bus *parent_bus; |
| |
| parent_bus = adapter->pdev->bus->parent; |
| if (!parent_bus) |
| return -1; |
| |
| parent_dev = parent_bus->self; |
| if (!parent_dev) |
| return -1; |
| |
| if (!pci_is_pcie(parent_dev)) |
| return -1; |
| |
| pcie_capability_read_word(parent_dev, reg, value); |
| if (*value == IXGBE_FAILED_READ_CFG_WORD && |
| ixgbe_check_cfg_remove(&adapter->hw, parent_dev)) |
| return -1; |
| return 0; |
| } |
| |
| static s32 ixgbe_get_parent_bus_info(struct ixgbe_adapter *adapter) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| u16 link_status = 0; |
| int err; |
| |
| hw->bus.type = ixgbe_bus_type_pci_express; |
| |
| /* Get the negotiated link width and speed from PCI config space of the |
| * parent, as this device is behind a switch |
| */ |
| err = ixgbe_read_pci_cfg_word_parent(adapter, 18, &link_status); |
| |
| /* assume caller will handle error case */ |
| if (err) |
| return err; |
| |
| hw->bus.width = ixgbe_convert_bus_width(link_status); |
| hw->bus.speed = ixgbe_convert_bus_speed(link_status); |
| |
| return 0; |
| } |
| |
| /** |
| * ixgbe_check_from_parent - Determine whether PCIe info should come from parent |
| * @hw: hw specific details |
| * |
| * This function is used by probe to determine whether a device's PCI-Express |
| * bandwidth details should be gathered from the parent bus instead of from the |
| * device. Used to ensure that various locations all have the correct device ID |
| * checks. |
| */ |
| static inline bool ixgbe_pcie_from_parent(struct ixgbe_hw *hw) |
| { |
| switch (hw->device_id) { |
| case IXGBE_DEV_ID_82599_SFP_SF_QP: |
| case IXGBE_DEV_ID_82599_QSFP_SF_QP: |
| return true; |
| default: |
| return false; |
| } |
| } |
| |
| static void ixgbe_check_minimum_link(struct ixgbe_adapter *adapter, |
| int expected_gts) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| int max_gts = 0; |
| enum pci_bus_speed speed = PCI_SPEED_UNKNOWN; |
| enum pcie_link_width width = PCIE_LNK_WIDTH_UNKNOWN; |
| struct pci_dev *pdev; |
| |
| /* Some devices are not connected over PCIe and thus do not negotiate |
| * speed. These devices do not have valid bus info, and thus any report |
| * we generate may not be correct. |
| */ |
| if (hw->bus.type == ixgbe_bus_type_internal) |
| return; |
| |
| /* determine whether to use the parent device */ |
| if (ixgbe_pcie_from_parent(&adapter->hw)) |
| pdev = adapter->pdev->bus->parent->self; |
| else |
| pdev = adapter->pdev; |
| |
| if (pcie_get_minimum_link(pdev, &speed, &width) || |
| speed == PCI_SPEED_UNKNOWN || width == PCIE_LNK_WIDTH_UNKNOWN) { |
| e_dev_warn("Unable to determine PCI Express bandwidth.\n"); |
| return; |
| } |
| |
| switch (speed) { |
| case PCIE_SPEED_2_5GT: |
| /* 8b/10b encoding reduces max throughput by 20% */ |
| max_gts = 2 * width; |
| break; |
| case PCIE_SPEED_5_0GT: |
| /* 8b/10b encoding reduces max throughput by 20% */ |
| max_gts = 4 * width; |
| break; |
| case PCIE_SPEED_8_0GT: |
| /* 128b/130b encoding reduces throughput by less than 2% */ |
| max_gts = 8 * width; |
| break; |
| default: |
| e_dev_warn("Unable to determine PCI Express bandwidth.\n"); |
| return; |
| } |
| |
| e_dev_info("PCI Express bandwidth of %dGT/s available\n", |
| max_gts); |
| e_dev_info("(Speed:%s, Width: x%d, Encoding Loss:%s)\n", |
| (speed == PCIE_SPEED_8_0GT ? "8.0GT/s" : |
| speed == PCIE_SPEED_5_0GT ? "5.0GT/s" : |
| speed == PCIE_SPEED_2_5GT ? "2.5GT/s" : |
| "Unknown"), |
| width, |
| (speed == PCIE_SPEED_2_5GT ? "20%" : |
| speed == PCIE_SPEED_5_0GT ? "20%" : |
| speed == PCIE_SPEED_8_0GT ? "<2%" : |
| "Unknown")); |
| |
| if (max_gts < expected_gts) { |
| e_dev_warn("This is not sufficient for optimal performance of this card.\n"); |
| e_dev_warn("For optimal performance, at least %dGT/s of bandwidth is required.\n", |
| expected_gts); |
| e_dev_warn("A slot with more lanes and/or higher speed is suggested.\n"); |
| } |
| } |
| |
| static void ixgbe_service_event_schedule(struct ixgbe_adapter *adapter) |
| { |
| if (!test_bit(__IXGBE_DOWN, &adapter->state) && |
| !test_bit(__IXGBE_REMOVING, &adapter->state) && |
| !test_and_set_bit(__IXGBE_SERVICE_SCHED, &adapter->state)) |
| queue_work(ixgbe_wq, &adapter->service_task); |
| } |
| |
| static void ixgbe_remove_adapter(struct ixgbe_hw *hw) |
| { |
| struct ixgbe_adapter *adapter = hw->back; |
| |
| if (!hw->hw_addr) |
| return; |
| hw->hw_addr = NULL; |
| e_dev_err("Adapter removed\n"); |
| if (test_bit(__IXGBE_SERVICE_INITED, &adapter->state)) |
| ixgbe_service_event_schedule(adapter); |
| } |
| |
| static void ixgbe_check_remove(struct ixgbe_hw *hw, u32 reg) |
| { |
| u32 value; |
| |
| /* The following check not only optimizes a bit by not |
| * performing a read on the status register when the |
| * register just read was a status register read that |
| * returned IXGBE_FAILED_READ_REG. It also blocks any |
| * potential recursion. |
| */ |
| if (reg == IXGBE_STATUS) { |
| ixgbe_remove_adapter(hw); |
| return; |
| } |
| value = ixgbe_read_reg(hw, IXGBE_STATUS); |
| if (value == IXGBE_FAILED_READ_REG) |
| ixgbe_remove_adapter(hw); |
| } |
| |
| /** |
| * ixgbe_read_reg - Read from device register |
| * @hw: hw specific details |
| * @reg: offset of register to read |
| * |
| * Returns : value read or IXGBE_FAILED_READ_REG if removed |
| * |
| * This function is used to read device registers. It checks for device |
| * removal by confirming any read that returns all ones by checking the |
| * status register value for all ones. This function avoids reading from |
| * the hardware if a removal was previously detected in which case it |
| * returns IXGBE_FAILED_READ_REG (all ones). |
| */ |
| u32 ixgbe_read_reg(struct ixgbe_hw *hw, u32 reg) |
| { |
| u8 __iomem *reg_addr = ACCESS_ONCE(hw->hw_addr); |
| u32 value; |
| |
| if (ixgbe_removed(reg_addr)) |
| return IXGBE_FAILED_READ_REG; |
| value = readl(reg_addr + reg); |
| if (unlikely(value == IXGBE_FAILED_READ_REG)) |
| ixgbe_check_remove(hw, reg); |
| return value; |
| } |
| |
| static bool ixgbe_check_cfg_remove(struct ixgbe_hw *hw, struct pci_dev *pdev) |
| { |
| u16 value; |
| |
| pci_read_config_word(pdev, PCI_VENDOR_ID, &value); |
| if (value == IXGBE_FAILED_READ_CFG_WORD) { |
| ixgbe_remove_adapter(hw); |
| return true; |
| } |
| return false; |
| } |
| |
| u16 ixgbe_read_pci_cfg_word(struct ixgbe_hw *hw, u32 reg) |
| { |
| struct ixgbe_adapter *adapter = hw->back; |
| u16 value; |
| |
| if (ixgbe_removed(hw->hw_addr)) |
| return IXGBE_FAILED_READ_CFG_WORD; |
| pci_read_config_word(adapter->pdev, reg, &value); |
| if (value == IXGBE_FAILED_READ_CFG_WORD && |
| ixgbe_check_cfg_remove(hw, adapter->pdev)) |
| return IXGBE_FAILED_READ_CFG_WORD; |
| return value; |
| } |
| |
| #ifdef CONFIG_PCI_IOV |
| static u32 ixgbe_read_pci_cfg_dword(struct ixgbe_hw *hw, u32 reg) |
| { |
| struct ixgbe_adapter *adapter = hw->back; |
| u32 value; |
| |
| if (ixgbe_removed(hw->hw_addr)) |
| return IXGBE_FAILED_READ_CFG_DWORD; |
| pci_read_config_dword(adapter->pdev, reg, &value); |
| if (value == IXGBE_FAILED_READ_CFG_DWORD && |
| ixgbe_check_cfg_remove(hw, adapter->pdev)) |
| return IXGBE_FAILED_READ_CFG_DWORD; |
| return value; |
| } |
| #endif /* CONFIG_PCI_IOV */ |
| |
| void ixgbe_write_pci_cfg_word(struct ixgbe_hw *hw, u32 reg, u16 value) |
| { |
| struct ixgbe_adapter *adapter = hw->back; |
| |
| if (ixgbe_removed(hw->hw_addr)) |
| return; |
| pci_write_config_word(adapter->pdev, reg, value); |
| } |
| |
| static void ixgbe_service_event_complete(struct ixgbe_adapter *adapter) |
| { |
| BUG_ON(!test_bit(__IXGBE_SERVICE_SCHED, &adapter->state)); |
| |
| /* flush memory to make sure state is correct before next watchdog */ |
| smp_mb__before_atomic(); |
| clear_bit(__IXGBE_SERVICE_SCHED, &adapter->state); |
| } |
| |
| struct ixgbe_reg_info { |
| u32 ofs; |
| char *name; |
| }; |
| |
| static const struct ixgbe_reg_info ixgbe_reg_info_tbl[] = { |
| |
| /* General Registers */ |
| {IXGBE_CTRL, "CTRL"}, |
| {IXGBE_STATUS, "STATUS"}, |
| {IXGBE_CTRL_EXT, "CTRL_EXT"}, |
| |
| /* Interrupt Registers */ |
| {IXGBE_EICR, "EICR"}, |
| |
| /* RX Registers */ |
| {IXGBE_SRRCTL(0), "SRRCTL"}, |
| {IXGBE_DCA_RXCTRL(0), "DRXCTL"}, |
| {IXGBE_RDLEN(0), "RDLEN"}, |
| {IXGBE_RDH(0), "RDH"}, |
| {IXGBE_RDT(0), "RDT"}, |
| {IXGBE_RXDCTL(0), "RXDCTL"}, |
| {IXGBE_RDBAL(0), "RDBAL"}, |
| {IXGBE_RDBAH(0), "RDBAH"}, |
| |
| /* TX Registers */ |
| {IXGBE_TDBAL(0), "TDBAL"}, |
| {IXGBE_TDBAH(0), "TDBAH"}, |
| {IXGBE_TDLEN(0), "TDLEN"}, |
| {IXGBE_TDH(0), "TDH"}, |
| {IXGBE_TDT(0), "TDT"}, |
| {IXGBE_TXDCTL(0), "TXDCTL"}, |
| |
| /* List Terminator */ |
| { .name = NULL } |
| }; |
| |
| |
| /* |
| * ixgbe_regdump - register printout routine |
| */ |
| static void ixgbe_regdump(struct ixgbe_hw *hw, struct ixgbe_reg_info *reginfo) |
| { |
| int i = 0, j = 0; |
| char rname[16]; |
| u32 regs[64]; |
| |
| switch (reginfo->ofs) { |
| case IXGBE_SRRCTL(0): |
| for (i = 0; i < 64; i++) |
| regs[i] = IXGBE_READ_REG(hw, IXGBE_SRRCTL(i)); |
| break; |
| case IXGBE_DCA_RXCTRL(0): |
| for (i = 0; i < 64; i++) |
| regs[i] = IXGBE_READ_REG(hw, IXGBE_DCA_RXCTRL(i)); |
| break; |
| case IXGBE_RDLEN(0): |
| for (i = 0; i < 64; i++) |
| regs[i] = IXGBE_READ_REG(hw, IXGBE_RDLEN(i)); |
| break; |
| case IXGBE_RDH(0): |
| for (i = 0; i < 64; i++) |
| regs[i] = IXGBE_READ_REG(hw, IXGBE_RDH(i)); |
| break; |
| case IXGBE_RDT(0): |
| for (i = 0; i < 64; i++) |
| regs[i] = IXGBE_READ_REG(hw, IXGBE_RDT(i)); |
| break; |
| case IXGBE_RXDCTL(0): |
| for (i = 0; i < 64; i++) |
| regs[i] = IXGBE_READ_REG(hw, IXGBE_RXDCTL(i)); |
| break; |
| case IXGBE_RDBAL(0): |
| for (i = 0; i < 64; i++) |
| regs[i] = IXGBE_READ_REG(hw, IXGBE_RDBAL(i)); |
| break; |
| case IXGBE_RDBAH(0): |
| for (i = 0; i < 64; i++) |
| regs[i] = IXGBE_READ_REG(hw, IXGBE_RDBAH(i)); |
| break; |
| case IXGBE_TDBAL(0): |
| for (i = 0; i < 64; i++) |
| regs[i] = IXGBE_READ_REG(hw, IXGBE_TDBAL(i)); |
| break; |
| case IXGBE_TDBAH(0): |
| for (i = 0; i < 64; i++) |
| regs[i] = IXGBE_READ_REG(hw, IXGBE_TDBAH(i)); |
| break; |
| case IXGBE_TDLEN(0): |
| for (i = 0; i < 64; i++) |
| regs[i] = IXGBE_READ_REG(hw, IXGBE_TDLEN(i)); |
| break; |
| case IXGBE_TDH(0): |
| for (i = 0; i < 64; i++) |
| regs[i] = IXGBE_READ_REG(hw, IXGBE_TDH(i)); |
| break; |
| case IXGBE_TDT(0): |
| for (i = 0; i < 64; i++) |
| regs[i] = IXGBE_READ_REG(hw, IXGBE_TDT(i)); |
| break; |
| case IXGBE_TXDCTL(0): |
| for (i = 0; i < 64; i++) |
| regs[i] = IXGBE_READ_REG(hw, IXGBE_TXDCTL(i)); |
| break; |
| default: |
| pr_info("%-15s %08x\n", reginfo->name, |
| IXGBE_READ_REG(hw, reginfo->ofs)); |
| return; |
| } |
| |
| for (i = 0; i < 8; i++) { |
| snprintf(rname, 16, "%s[%d-%d]", reginfo->name, i*8, i*8+7); |
| pr_err("%-15s", rname); |
| for (j = 0; j < 8; j++) |
| pr_cont(" %08x", regs[i*8+j]); |
| pr_cont("\n"); |
| } |
| |
| } |
| |
| /* |
| * ixgbe_dump - Print registers, tx-rings and rx-rings |
| */ |
| static void ixgbe_dump(struct ixgbe_adapter *adapter) |
| { |
| struct net_device *netdev = adapter->netdev; |
| struct ixgbe_hw *hw = &adapter->hw; |
| struct ixgbe_reg_info *reginfo; |
| int n = 0; |
| struct ixgbe_ring *tx_ring; |
| struct ixgbe_tx_buffer *tx_buffer; |
| union ixgbe_adv_tx_desc *tx_desc; |
| struct my_u0 { u64 a; u64 b; } *u0; |
| struct ixgbe_ring *rx_ring; |
| union ixgbe_adv_rx_desc *rx_desc; |
| struct ixgbe_rx_buffer *rx_buffer_info; |
| u32 staterr; |
| int i = 0; |
| |
| if (!netif_msg_hw(adapter)) |
| return; |
| |
| /* Print netdevice Info */ |
| if (netdev) { |
| dev_info(&adapter->pdev->dev, "Net device Info\n"); |
| pr_info("Device Name state " |
| "trans_start last_rx\n"); |
| pr_info("%-15s %016lX %016lX %016lX\n", |
| netdev->name, |
| netdev->state, |
| netdev->trans_start, |
| netdev->last_rx); |
| } |
| |
| /* Print Registers */ |
| dev_info(&adapter->pdev->dev, "Register Dump\n"); |
| pr_info(" Register Name Value\n"); |
| for (reginfo = (struct ixgbe_reg_info *)ixgbe_reg_info_tbl; |
| reginfo->name; reginfo++) { |
| ixgbe_regdump(hw, reginfo); |
| } |
| |
| /* Print TX Ring Summary */ |
| if (!netdev || !netif_running(netdev)) |
| return; |
| |
| dev_info(&adapter->pdev->dev, "TX Rings Summary\n"); |
| pr_info(" %s %s %s %s\n", |
| "Queue [NTU] [NTC] [bi(ntc)->dma ]", |
| "leng", "ntw", "timestamp"); |
| for (n = 0; n < adapter->num_tx_queues; n++) { |
| tx_ring = adapter->tx_ring[n]; |
| tx_buffer = &tx_ring->tx_buffer_info[tx_ring->next_to_clean]; |
| pr_info(" %5d %5X %5X %016llX %08X %p %016llX\n", |
| n, tx_ring->next_to_use, tx_ring->next_to_clean, |
| (u64)dma_unmap_addr(tx_buffer, dma), |
| dma_unmap_len(tx_buffer, len), |
| tx_buffer->next_to_watch, |
| (u64)tx_buffer->time_stamp); |
| } |
| |
| /* Print TX Rings */ |
| if (!netif_msg_tx_done(adapter)) |
| goto rx_ring_summary; |
| |
| dev_info(&adapter->pdev->dev, "TX Rings Dump\n"); |
| |
| /* Transmit Descriptor Formats |
| * |
| * 82598 Advanced Transmit Descriptor |
| * +--------------------------------------------------------------+ |
| * 0 | Buffer Address [63:0] | |
| * +--------------------------------------------------------------+ |
| * 8 | PAYLEN | POPTS | IDX | STA | DCMD |DTYP | RSV | DTALEN | |
| * +--------------------------------------------------------------+ |
| * 63 46 45 40 39 36 35 32 31 24 23 20 19 0 |
| * |
| * 82598 Advanced Transmit Descriptor (Write-Back Format) |
| * +--------------------------------------------------------------+ |
| * 0 | RSV [63:0] | |
| * +--------------------------------------------------------------+ |
| * 8 | RSV | STA | NXTSEQ | |
| * +--------------------------------------------------------------+ |
| * 63 36 35 32 31 0 |
| * |
| * 82599+ Advanced Transmit Descriptor |
| * +--------------------------------------------------------------+ |
| * 0 | Buffer Address [63:0] | |
| * +--------------------------------------------------------------+ |
| * 8 |PAYLEN |POPTS|CC|IDX |STA |DCMD |DTYP |MAC |RSV |DTALEN | |
| * +--------------------------------------------------------------+ |
| * 63 46 45 40 39 38 36 35 32 31 24 23 20 19 18 17 16 15 0 |
| * |
| * 82599+ Advanced Transmit Descriptor (Write-Back Format) |
| * +--------------------------------------------------------------+ |
| * 0 | RSV [63:0] | |
| * +--------------------------------------------------------------+ |
| * 8 | RSV | STA | RSV | |
| * +--------------------------------------------------------------+ |
| * 63 36 35 32 31 0 |
| */ |
| |
| for (n = 0; n < adapter->num_tx_queues; n++) { |
| tx_ring = adapter->tx_ring[n]; |
| pr_info("------------------------------------\n"); |
| pr_info("TX QUEUE INDEX = %d\n", tx_ring->queue_index); |
| pr_info("------------------------------------\n"); |
| pr_info("%s%s %s %s %s %s\n", |
| "T [desc] [address 63:0 ] ", |
| "[PlPOIdStDDt Ln] [bi->dma ] ", |
| "leng", "ntw", "timestamp", "bi->skb"); |
| |
| for (i = 0; tx_ring->desc && (i < tx_ring->count); i++) { |
| tx_desc = IXGBE_TX_DESC(tx_ring, i); |
| tx_buffer = &tx_ring->tx_buffer_info[i]; |
| u0 = (struct my_u0 *)tx_desc; |
| if (dma_unmap_len(tx_buffer, len) > 0) { |
| pr_info("T [0x%03X] %016llX %016llX %016llX %08X %p %016llX %p", |
| i, |
| le64_to_cpu(u0->a), |
| le64_to_cpu(u0->b), |
| (u64)dma_unmap_addr(tx_buffer, dma), |
| dma_unmap_len(tx_buffer, len), |
| tx_buffer->next_to_watch, |
| (u64)tx_buffer->time_stamp, |
| tx_buffer->skb); |
| if (i == tx_ring->next_to_use && |
| i == tx_ring->next_to_clean) |
| pr_cont(" NTC/U\n"); |
| else if (i == tx_ring->next_to_use) |
| pr_cont(" NTU\n"); |
| else if (i == tx_ring->next_to_clean) |
| pr_cont(" NTC\n"); |
| else |
| pr_cont("\n"); |
| |
| if (netif_msg_pktdata(adapter) && |
| tx_buffer->skb) |
| print_hex_dump(KERN_INFO, "", |
| DUMP_PREFIX_ADDRESS, 16, 1, |
| tx_buffer->skb->data, |
| dma_unmap_len(tx_buffer, len), |
| true); |
| } |
| } |
| } |
| |
| /* Print RX Rings Summary */ |
| rx_ring_summary: |
| dev_info(&adapter->pdev->dev, "RX Rings Summary\n"); |
| pr_info("Queue [NTU] [NTC]\n"); |
| for (n = 0; n < adapter->num_rx_queues; n++) { |
| rx_ring = adapter->rx_ring[n]; |
| pr_info("%5d %5X %5X\n", |
| n, rx_ring->next_to_use, rx_ring->next_to_clean); |
| } |
| |
| /* Print RX Rings */ |
| if (!netif_msg_rx_status(adapter)) |
| return; |
| |
| dev_info(&adapter->pdev->dev, "RX Rings Dump\n"); |
| |
| /* Receive Descriptor Formats |
| * |
| * 82598 Advanced Receive Descriptor (Read) Format |
| * 63 1 0 |
| * +-----------------------------------------------------+ |
| * 0 | Packet Buffer Address [63:1] |A0/NSE| |
| * +----------------------------------------------+------+ |
| * 8 | Header Buffer Address [63:1] | DD | |
| * +-----------------------------------------------------+ |
| * |
| * |
| * 82598 Advanced Receive Descriptor (Write-Back) Format |
| * |
| * 63 48 47 32 31 30 21 20 16 15 4 3 0 |
| * +------------------------------------------------------+ |
| * 0 | RSS Hash / |SPH| HDR_LEN | RSV |Packet| RSS | |
| * | Packet | IP | | | | Type | Type | |
| * | Checksum | Ident | | | | | | |
| * +------------------------------------------------------+ |
| * 8 | VLAN Tag | Length | Extended Error | Extended Status | |
| * +------------------------------------------------------+ |
| * 63 48 47 32 31 20 19 0 |
| * |
| * 82599+ Advanced Receive Descriptor (Read) Format |
| * 63 1 0 |
| * +-----------------------------------------------------+ |
| * 0 | Packet Buffer Address [63:1] |A0/NSE| |
| * +----------------------------------------------+------+ |
| * 8 | Header Buffer Address [63:1] | DD | |
| * +-----------------------------------------------------+ |
| * |
| * |
| * 82599+ Advanced Receive Descriptor (Write-Back) Format |
| * |
| * 63 48 47 32 31 30 21 20 17 16 4 3 0 |
| * +------------------------------------------------------+ |
| * 0 |RSS / Frag Checksum|SPH| HDR_LEN |RSC- |Packet| RSS | |
| * |/ RTT / PCoE_PARAM | | | CNT | Type | Type | |
| * |/ Flow Dir Flt ID | | | | | | |
| * +------------------------------------------------------+ |
| * 8 | VLAN Tag | Length |Extended Error| Xtnd Status/NEXTP | |
| * +------------------------------------------------------+ |
| * 63 48 47 32 31 20 19 0 |
| */ |
| |
| for (n = 0; n < adapter->num_rx_queues; n++) { |
| rx_ring = adapter->rx_ring[n]; |
| pr_info("------------------------------------\n"); |
| pr_info("RX QUEUE INDEX = %d\n", rx_ring->queue_index); |
| pr_info("------------------------------------\n"); |
| pr_info("%s%s%s", |
| "R [desc] [ PktBuf A0] ", |
| "[ HeadBuf DD] [bi->dma ] [bi->skb ] ", |
| "<-- Adv Rx Read format\n"); |
| pr_info("%s%s%s", |
| "RWB[desc] [PcsmIpSHl PtRs] ", |
| "[vl er S cks ln] ---------------- [bi->skb ] ", |
| "<-- Adv Rx Write-Back format\n"); |
| |
| for (i = 0; i < rx_ring->count; i++) { |
| rx_buffer_info = &rx_ring->rx_buffer_info[i]; |
| rx_desc = IXGBE_RX_DESC(rx_ring, i); |
| u0 = (struct my_u0 *)rx_desc; |
| staterr = le32_to_cpu(rx_desc->wb.upper.status_error); |
| if (staterr & IXGBE_RXD_STAT_DD) { |
| /* Descriptor Done */ |
| pr_info("RWB[0x%03X] %016llX " |
| "%016llX ---------------- %p", i, |
| le64_to_cpu(u0->a), |
| le64_to_cpu(u0->b), |
| rx_buffer_info->skb); |
| } else { |
| pr_info("R [0x%03X] %016llX " |
| "%016llX %016llX %p", i, |
| le64_to_cpu(u0->a), |
| le64_to_cpu(u0->b), |
| (u64)rx_buffer_info->dma, |
| rx_buffer_info->skb); |
| |
| if (netif_msg_pktdata(adapter) && |
| rx_buffer_info->dma) { |
| print_hex_dump(KERN_INFO, "", |
| DUMP_PREFIX_ADDRESS, 16, 1, |
| page_address(rx_buffer_info->page) + |
| rx_buffer_info->page_offset, |
| ixgbe_rx_bufsz(rx_ring), true); |
| } |
| } |
| |
| if (i == rx_ring->next_to_use) |
| pr_cont(" NTU\n"); |
| else if (i == rx_ring->next_to_clean) |
| pr_cont(" NTC\n"); |
| else |
| pr_cont("\n"); |
| |
| } |
| } |
| } |
| |
| static void ixgbe_release_hw_control(struct ixgbe_adapter *adapter) |
| { |
| u32 ctrl_ext; |
| |
| /* Let firmware take over control of h/w */ |
| ctrl_ext = IXGBE_READ_REG(&adapter->hw, IXGBE_CTRL_EXT); |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_CTRL_EXT, |
| ctrl_ext & ~IXGBE_CTRL_EXT_DRV_LOAD); |
| } |
| |
| static void ixgbe_get_hw_control(struct ixgbe_adapter *adapter) |
| { |
| u32 ctrl_ext; |
| |
| /* Let firmware know the driver has taken over */ |
| ctrl_ext = IXGBE_READ_REG(&adapter->hw, IXGBE_CTRL_EXT); |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_CTRL_EXT, |
| ctrl_ext | IXGBE_CTRL_EXT_DRV_LOAD); |
| } |
| |
| /** |
| * ixgbe_set_ivar - set the IVAR registers, mapping interrupt causes to vectors |
| * @adapter: pointer to adapter struct |
| * @direction: 0 for Rx, 1 for Tx, -1 for other causes |
| * @queue: queue to map the corresponding interrupt to |
| * @msix_vector: the vector to map to the corresponding queue |
| * |
| */ |
| static void ixgbe_set_ivar(struct ixgbe_adapter *adapter, s8 direction, |
| u8 queue, u8 msix_vector) |
| { |
| u32 ivar, index; |
| struct ixgbe_hw *hw = &adapter->hw; |
| switch (hw->mac.type) { |
| case ixgbe_mac_82598EB: |
| msix_vector |= IXGBE_IVAR_ALLOC_VAL; |
| if (direction == -1) |
| direction = 0; |
| index = (((direction * 64) + queue) >> 2) & 0x1F; |
| ivar = IXGBE_READ_REG(hw, IXGBE_IVAR(index)); |
| ivar &= ~(0xFF << (8 * (queue & 0x3))); |
| ivar |= (msix_vector << (8 * (queue & 0x3))); |
| IXGBE_WRITE_REG(hw, IXGBE_IVAR(index), ivar); |
| break; |
| case ixgbe_mac_82599EB: |
| case ixgbe_mac_X540: |
| case ixgbe_mac_X550: |
| case ixgbe_mac_X550EM_x: |
| if (direction == -1) { |
| /* other causes */ |
| msix_vector |= IXGBE_IVAR_ALLOC_VAL; |
| index = ((queue & 1) * 8); |
| ivar = IXGBE_READ_REG(&adapter->hw, IXGBE_IVAR_MISC); |
| ivar &= ~(0xFF << index); |
| ivar |= (msix_vector << index); |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_IVAR_MISC, ivar); |
| break; |
| } else { |
| /* tx or rx causes */ |
| msix_vector |= IXGBE_IVAR_ALLOC_VAL; |
| index = ((16 * (queue & 1)) + (8 * direction)); |
| ivar = IXGBE_READ_REG(hw, IXGBE_IVAR(queue >> 1)); |
| ivar &= ~(0xFF << index); |
| ivar |= (msix_vector << index); |
| IXGBE_WRITE_REG(hw, IXGBE_IVAR(queue >> 1), ivar); |
| break; |
| } |
| default: |
| break; |
| } |
| } |
| |
| static inline void ixgbe_irq_rearm_queues(struct ixgbe_adapter *adapter, |
| u64 qmask) |
| { |
| u32 mask; |
| |
| switch (adapter->hw.mac.type) { |
| case ixgbe_mac_82598EB: |
| mask = (IXGBE_EIMS_RTX_QUEUE & qmask); |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS, mask); |
| break; |
| case ixgbe_mac_82599EB: |
| case ixgbe_mac_X540: |
| case ixgbe_mac_X550: |
| case ixgbe_mac_X550EM_x: |
| mask = (qmask & 0xFFFFFFFF); |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS_EX(0), mask); |
| mask = (qmask >> 32); |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS_EX(1), mask); |
| break; |
| default: |
| break; |
| } |
| } |
| |
| void ixgbe_unmap_and_free_tx_resource(struct ixgbe_ring *ring, |
| struct ixgbe_tx_buffer *tx_buffer) |
| { |
| if (tx_buffer->skb) { |
| dev_kfree_skb_any(tx_buffer->skb); |
| if (dma_unmap_len(tx_buffer, len)) |
| dma_unmap_single(ring->dev, |
| dma_unmap_addr(tx_buffer, dma), |
| dma_unmap_len(tx_buffer, len), |
| DMA_TO_DEVICE); |
| } else if (dma_unmap_len(tx_buffer, len)) { |
| dma_unmap_page(ring->dev, |
| dma_unmap_addr(tx_buffer, dma), |
| dma_unmap_len(tx_buffer, len), |
| DMA_TO_DEVICE); |
| } |
| tx_buffer->next_to_watch = NULL; |
| tx_buffer->skb = NULL; |
| dma_unmap_len_set(tx_buffer, len, 0); |
| /* tx_buffer must be completely set up in the transmit path */ |
| } |
| |
| static void ixgbe_update_xoff_rx_lfc(struct ixgbe_adapter *adapter) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| struct ixgbe_hw_stats *hwstats = &adapter->stats; |
| int i; |
| u32 data; |
| |
| if ((hw->fc.current_mode != ixgbe_fc_full) && |
| (hw->fc.current_mode != ixgbe_fc_rx_pause)) |
| return; |
| |
| switch (hw->mac.type) { |
| case ixgbe_mac_82598EB: |
| data = IXGBE_READ_REG(hw, IXGBE_LXOFFRXC); |
| break; |
| default: |
| data = IXGBE_READ_REG(hw, IXGBE_LXOFFRXCNT); |
| } |
| hwstats->lxoffrxc += data; |
| |
| /* refill credits (no tx hang) if we received xoff */ |
| if (!data) |
| return; |
| |
| for (i = 0; i < adapter->num_tx_queues; i++) |
| clear_bit(__IXGBE_HANG_CHECK_ARMED, |
| &adapter->tx_ring[i]->state); |
| } |
| |
| static void ixgbe_update_xoff_received(struct ixgbe_adapter *adapter) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| struct ixgbe_hw_stats *hwstats = &adapter->stats; |
| u32 xoff[8] = {0}; |
| u8 tc; |
| int i; |
| bool pfc_en = adapter->dcb_cfg.pfc_mode_enable; |
| |
| if (adapter->ixgbe_ieee_pfc) |
| pfc_en |= !!(adapter->ixgbe_ieee_pfc->pfc_en); |
| |
| if (!(adapter->flags & IXGBE_FLAG_DCB_ENABLED) || !pfc_en) { |
| ixgbe_update_xoff_rx_lfc(adapter); |
| return; |
| } |
| |
| /* update stats for each tc, only valid with PFC enabled */ |
| for (i = 0; i < MAX_TX_PACKET_BUFFERS; i++) { |
| u32 pxoffrxc; |
| |
| switch (hw->mac.type) { |
| case ixgbe_mac_82598EB: |
| pxoffrxc = IXGBE_READ_REG(hw, IXGBE_PXOFFRXC(i)); |
| break; |
| default: |
| pxoffrxc = IXGBE_READ_REG(hw, IXGBE_PXOFFRXCNT(i)); |
| } |
| hwstats->pxoffrxc[i] += pxoffrxc; |
| /* Get the TC for given UP */ |
| tc = netdev_get_prio_tc_map(adapter->netdev, i); |
| xoff[tc] += pxoffrxc; |
| } |
| |
| /* disarm tx queues that have received xoff frames */ |
| for (i = 0; i < adapter->num_tx_queues; i++) { |
| struct ixgbe_ring *tx_ring = adapter->tx_ring[i]; |
| |
| tc = tx_ring->dcb_tc; |
| if (xoff[tc]) |
| clear_bit(__IXGBE_HANG_CHECK_ARMED, &tx_ring->state); |
| } |
| } |
| |
| static u64 ixgbe_get_tx_completed(struct ixgbe_ring *ring) |
| { |
| return ring->stats.packets; |
| } |
| |
| static u64 ixgbe_get_tx_pending(struct ixgbe_ring *ring) |
| { |
| struct ixgbe_adapter *adapter; |
| struct ixgbe_hw *hw; |
| u32 head, tail; |
| |
| if (ring->l2_accel_priv) |
| adapter = ring->l2_accel_priv->real_adapter; |
| else |
| adapter = netdev_priv(ring->netdev); |
| |
| hw = &adapter->hw; |
| head = IXGBE_READ_REG(hw, IXGBE_TDH(ring->reg_idx)); |
| tail = IXGBE_READ_REG(hw, IXGBE_TDT(ring->reg_idx)); |
| |
| if (head != tail) |
| return (head < tail) ? |
| tail - head : (tail + ring->count - head); |
| |
| return 0; |
| } |
| |
| static inline bool ixgbe_check_tx_hang(struct ixgbe_ring *tx_ring) |
| { |
| u32 tx_done = ixgbe_get_tx_completed(tx_ring); |
| u32 tx_done_old = tx_ring->tx_stats.tx_done_old; |
| u32 tx_pending = ixgbe_get_tx_pending(tx_ring); |
| |
| clear_check_for_tx_hang(tx_ring); |
| |
| /* |
| * Check for a hung queue, but be thorough. This verifies |
| * that a transmit has been completed since the previous |
| * check AND there is at least one packet pending. The |
| * ARMED bit is set to indicate a potential hang. The |
| * bit is cleared if a pause frame is received to remove |
| * false hang detection due to PFC or 802.3x frames. By |
| * requiring this to fail twice we avoid races with |
| * pfc clearing the ARMED bit and conditions where we |
| * run the check_tx_hang logic with a transmit completion |
| * pending but without time to complete it yet. |
| */ |
| if (tx_done_old == tx_done && tx_pending) |
| /* make sure it is true for two checks in a row */ |
| return test_and_set_bit(__IXGBE_HANG_CHECK_ARMED, |
| &tx_ring->state); |
| /* update completed stats and continue */ |
| tx_ring->tx_stats.tx_done_old = tx_done; |
| /* reset the countdown */ |
| clear_bit(__IXGBE_HANG_CHECK_ARMED, &tx_ring->state); |
| |
| return false; |
| } |
| |
| /** |
| * ixgbe_tx_timeout_reset - initiate reset due to Tx timeout |
| * @adapter: driver private struct |
| **/ |
| static void ixgbe_tx_timeout_reset(struct ixgbe_adapter *adapter) |
| { |
| |
| /* Do the reset outside of interrupt context */ |
| if (!test_bit(__IXGBE_DOWN, &adapter->state)) { |
| adapter->flags2 |= IXGBE_FLAG2_RESET_REQUESTED; |
| e_warn(drv, "initiating reset due to tx timeout\n"); |
| ixgbe_service_event_schedule(adapter); |
| } |
| } |
| |
| /** |
| * ixgbe_clean_tx_irq - Reclaim resources after transmit completes |
| * @q_vector: structure containing interrupt and ring information |
| * @tx_ring: tx ring to clean |
| **/ |
| static bool ixgbe_clean_tx_irq(struct ixgbe_q_vector *q_vector, |
| struct ixgbe_ring *tx_ring, int napi_budget) |
| { |
| struct ixgbe_adapter *adapter = q_vector->adapter; |
| struct ixgbe_tx_buffer *tx_buffer; |
| union ixgbe_adv_tx_desc *tx_desc; |
| unsigned int total_bytes = 0, total_packets = 0; |
| unsigned int budget = q_vector->tx.work_limit; |
| unsigned int i = tx_ring->next_to_clean; |
| |
| if (test_bit(__IXGBE_DOWN, &adapter->state)) |
| return true; |
| |
| tx_buffer = &tx_ring->tx_buffer_info[i]; |
| tx_desc = IXGBE_TX_DESC(tx_ring, i); |
| i -= tx_ring->count; |
| |
| do { |
| union ixgbe_adv_tx_desc *eop_desc = tx_buffer->next_to_watch; |
| |
| /* if next_to_watch is not set then there is no work pending */ |
| if (!eop_desc) |
| break; |
| |
| /* prevent any other reads prior to eop_desc */ |
| read_barrier_depends(); |
| |
| /* if DD is not set pending work has not been completed */ |
| if (!(eop_desc->wb.status & cpu_to_le32(IXGBE_TXD_STAT_DD))) |
| break; |
| |
| /* clear next_to_watch to prevent false hangs */ |
| tx_buffer->next_to_watch = NULL; |
| |
| /* update the statistics for this packet */ |
| total_bytes += tx_buffer->bytecount; |
| total_packets += tx_buffer->gso_segs; |
| |
| /* free the skb */ |
| napi_consume_skb(tx_buffer->skb, napi_budget); |
| |
| /* unmap skb header data */ |
| dma_unmap_single(tx_ring->dev, |
| dma_unmap_addr(tx_buffer, dma), |
| dma_unmap_len(tx_buffer, len), |
| DMA_TO_DEVICE); |
| |
| /* clear tx_buffer data */ |
| tx_buffer->skb = NULL; |
| dma_unmap_len_set(tx_buffer, len, 0); |
| |
| /* unmap remaining buffers */ |
| while (tx_desc != eop_desc) { |
| tx_buffer++; |
| tx_desc++; |
| i++; |
| if (unlikely(!i)) { |
| i -= tx_ring->count; |
| tx_buffer = tx_ring->tx_buffer_info; |
| tx_desc = IXGBE_TX_DESC(tx_ring, 0); |
| } |
| |
| /* unmap any remaining paged data */ |
| if (dma_unmap_len(tx_buffer, len)) { |
| dma_unmap_page(tx_ring->dev, |
| dma_unmap_addr(tx_buffer, dma), |
| dma_unmap_len(tx_buffer, len), |
| DMA_TO_DEVICE); |
| dma_unmap_len_set(tx_buffer, len, 0); |
| } |
| } |
| |
| /* move us one more past the eop_desc for start of next pkt */ |
| tx_buffer++; |
| tx_desc++; |
| i++; |
| if (unlikely(!i)) { |
| i -= tx_ring->count; |
| tx_buffer = tx_ring->tx_buffer_info; |
| tx_desc = IXGBE_TX_DESC(tx_ring, 0); |
| } |
| |
| /* issue prefetch for next Tx descriptor */ |
| prefetch(tx_desc); |
| |
| /* update budget accounting */ |
| budget--; |
| } while (likely(budget)); |
| |
| i += tx_ring->count; |
| tx_ring->next_to_clean = i; |
| u64_stats_update_begin(&tx_ring->syncp); |
| tx_ring->stats.bytes += total_bytes; |
| tx_ring->stats.packets += total_packets; |
| u64_stats_update_end(&tx_ring->syncp); |
| q_vector->tx.total_bytes += total_bytes; |
| q_vector->tx.total_packets += total_packets; |
| |
| if (check_for_tx_hang(tx_ring) && ixgbe_check_tx_hang(tx_ring)) { |
| /* schedule immediate reset if we believe we hung */ |
| struct ixgbe_hw *hw = &adapter->hw; |
| e_err(drv, "Detected Tx Unit Hang\n" |
| " Tx Queue <%d>\n" |
| " TDH, TDT <%x>, <%x>\n" |
| " next_to_use <%x>\n" |
| " next_to_clean <%x>\n" |
| "tx_buffer_info[next_to_clean]\n" |
| " time_stamp <%lx>\n" |
| " jiffies <%lx>\n", |
| tx_ring->queue_index, |
| IXGBE_READ_REG(hw, IXGBE_TDH(tx_ring->reg_idx)), |
| IXGBE_READ_REG(hw, IXGBE_TDT(tx_ring->reg_idx)), |
| tx_ring->next_to_use, i, |
| tx_ring->tx_buffer_info[i].time_stamp, jiffies); |
| |
| netif_stop_subqueue(tx_ring->netdev, tx_ring->queue_index); |
| |
| e_info(probe, |
| "tx hang %d detected on queue %d, resetting adapter\n", |
| adapter->tx_timeout_count + 1, tx_ring->queue_index); |
| |
| /* schedule immediate reset if we believe we hung */ |
| ixgbe_tx_timeout_reset(adapter); |
| |
| /* the adapter is about to reset, no point in enabling stuff */ |
| return true; |
| } |
| |
| netdev_tx_completed_queue(txring_txq(tx_ring), |
| total_packets, total_bytes); |
| |
| #define TX_WAKE_THRESHOLD (DESC_NEEDED * 2) |
| if (unlikely(total_packets && netif_carrier_ok(tx_ring->netdev) && |
| (ixgbe_desc_unused(tx_ring) >= TX_WAKE_THRESHOLD))) { |
| /* Make sure that anybody stopping the queue after this |
| * sees the new next_to_clean. |
| */ |
| smp_mb(); |
| if (__netif_subqueue_stopped(tx_ring->netdev, |
| tx_ring->queue_index) |
| && !test_bit(__IXGBE_DOWN, &adapter->state)) { |
| netif_wake_subqueue(tx_ring->netdev, |
| tx_ring->queue_index); |
| ++tx_ring->tx_stats.restart_queue; |
| } |
| } |
| |
| return !!budget; |
| } |
| |
| #ifdef CONFIG_IXGBE_DCA |
| static void ixgbe_update_tx_dca(struct ixgbe_adapter *adapter, |
| struct ixgbe_ring *tx_ring, |
| int cpu) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| u32 txctrl = 0; |
| u16 reg_offset; |
| |
| if (adapter->flags & IXGBE_FLAG_DCA_ENABLED) |
| txctrl = dca3_get_tag(tx_ring->dev, cpu); |
| |
| switch (hw->mac.type) { |
| case ixgbe_mac_82598EB: |
| reg_offset = IXGBE_DCA_TXCTRL(tx_ring->reg_idx); |
| break; |
| case ixgbe_mac_82599EB: |
| case ixgbe_mac_X540: |
| reg_offset = IXGBE_DCA_TXCTRL_82599(tx_ring->reg_idx); |
| txctrl <<= IXGBE_DCA_TXCTRL_CPUID_SHIFT_82599; |
| break; |
| default: |
| /* for unknown hardware do not write register */ |
| return; |
| } |
| |
| /* |
| * We can enable relaxed ordering for reads, but not writes when |
| * DCA is enabled. This is due to a known issue in some chipsets |
| * which will cause the DCA tag to be cleared. |
| */ |
| txctrl |= IXGBE_DCA_TXCTRL_DESC_RRO_EN | |
| IXGBE_DCA_TXCTRL_DATA_RRO_EN | |
| IXGBE_DCA_TXCTRL_DESC_DCA_EN; |
| |
| IXGBE_WRITE_REG(hw, reg_offset, txctrl); |
| } |
| |
| static void ixgbe_update_rx_dca(struct ixgbe_adapter *adapter, |
| struct ixgbe_ring *rx_ring, |
| int cpu) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| u32 rxctrl = 0; |
| u8 reg_idx = rx_ring->reg_idx; |
| |
| if (adapter->flags & IXGBE_FLAG_DCA_ENABLED) |
| rxctrl = dca3_get_tag(rx_ring->dev, cpu); |
| |
| switch (hw->mac.type) { |
| case ixgbe_mac_82599EB: |
| case ixgbe_mac_X540: |
| rxctrl <<= IXGBE_DCA_RXCTRL_CPUID_SHIFT_82599; |
| break; |
| default: |
| break; |
| } |
| |
| /* |
| * We can enable relaxed ordering for reads, but not writes when |
| * DCA is enabled. This is due to a known issue in some chipsets |
| * which will cause the DCA tag to be cleared. |
| */ |
| rxctrl |= IXGBE_DCA_RXCTRL_DESC_RRO_EN | |
| IXGBE_DCA_RXCTRL_DATA_DCA_EN | |
| IXGBE_DCA_RXCTRL_DESC_DCA_EN; |
| |
| IXGBE_WRITE_REG(hw, IXGBE_DCA_RXCTRL(reg_idx), rxctrl); |
| } |
| |
| static void ixgbe_update_dca(struct ixgbe_q_vector *q_vector) |
| { |
| struct ixgbe_adapter *adapter = q_vector->adapter; |
| struct ixgbe_ring *ring; |
| int cpu = get_cpu(); |
| |
| if (q_vector->cpu == cpu) |
| goto out_no_update; |
| |
| ixgbe_for_each_ring(ring, q_vector->tx) |
| ixgbe_update_tx_dca(adapter, ring, cpu); |
| |
| ixgbe_for_each_ring(ring, q_vector->rx) |
| ixgbe_update_rx_dca(adapter, ring, cpu); |
| |
| q_vector->cpu = cpu; |
| out_no_update: |
| put_cpu(); |
| } |
| |
| static void ixgbe_setup_dca(struct ixgbe_adapter *adapter) |
| { |
| int i; |
| |
| /* always use CB2 mode, difference is masked in the CB driver */ |
| if (adapter->flags & IXGBE_FLAG_DCA_ENABLED) |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_CTRL, |
| IXGBE_DCA_CTRL_DCA_MODE_CB2); |
| else |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_CTRL, |
| IXGBE_DCA_CTRL_DCA_DISABLE); |
| |
| for (i = 0; i < adapter->num_q_vectors; i++) { |
| adapter->q_vector[i]->cpu = -1; |
| ixgbe_update_dca(adapter->q_vector[i]); |
| } |
| } |
| |
| static int __ixgbe_notify_dca(struct device *dev, void *data) |
| { |
| struct ixgbe_adapter *adapter = dev_get_drvdata(dev); |
| unsigned long event = *(unsigned long *)data; |
| |
| if (!(adapter->flags & IXGBE_FLAG_DCA_CAPABLE)) |
| return 0; |
| |
| switch (event) { |
| case DCA_PROVIDER_ADD: |
| /* if we're already enabled, don't do it again */ |
| if (adapter->flags & IXGBE_FLAG_DCA_ENABLED) |
| break; |
| if (dca_add_requester(dev) == 0) { |
| adapter->flags |= IXGBE_FLAG_DCA_ENABLED; |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_CTRL, |
| IXGBE_DCA_CTRL_DCA_MODE_CB2); |
| break; |
| } |
| /* Fall Through since DCA is disabled. */ |
| case DCA_PROVIDER_REMOVE: |
| if (adapter->flags & IXGBE_FLAG_DCA_ENABLED) { |
| dca_remove_requester(dev); |
| adapter->flags &= ~IXGBE_FLAG_DCA_ENABLED; |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_CTRL, |
| IXGBE_DCA_CTRL_DCA_DISABLE); |
| } |
| break; |
| } |
| |
| return 0; |
| } |
| |
| #endif /* CONFIG_IXGBE_DCA */ |
| |
| #define IXGBE_RSS_L4_TYPES_MASK \ |
| ((1ul << IXGBE_RXDADV_RSSTYPE_IPV4_TCP) | \ |
| (1ul << IXGBE_RXDADV_RSSTYPE_IPV4_UDP) | \ |
| (1ul << IXGBE_RXDADV_RSSTYPE_IPV6_TCP) | \ |
| (1ul << IXGBE_RXDADV_RSSTYPE_IPV6_UDP)) |
| |
| static inline void ixgbe_rx_hash(struct ixgbe_ring *ring, |
| union ixgbe_adv_rx_desc *rx_desc, |
| struct sk_buff *skb) |
| { |
| u16 rss_type; |
| |
| if (!(ring->netdev->features & NETIF_F_RXHASH)) |
| return; |
| |
| rss_type = le16_to_cpu(rx_desc->wb.lower.lo_dword.hs_rss.pkt_info) & |
| IXGBE_RXDADV_RSSTYPE_MASK; |
| |
| if (!rss_type) |
| return; |
| |
| skb_set_hash(skb, le32_to_cpu(rx_desc->wb.lower.hi_dword.rss), |
| (IXGBE_RSS_L4_TYPES_MASK & (1ul << rss_type)) ? |
| PKT_HASH_TYPE_L4 : PKT_HASH_TYPE_L3); |
| } |
| |
| #ifdef IXGBE_FCOE |
| /** |
| * ixgbe_rx_is_fcoe - check the rx desc for incoming pkt type |
| * @ring: structure containing ring specific data |
| * @rx_desc: advanced rx descriptor |
| * |
| * Returns : true if it is FCoE pkt |
| */ |
| static inline bool ixgbe_rx_is_fcoe(struct ixgbe_ring *ring, |
| union ixgbe_adv_rx_desc *rx_desc) |
| { |
| __le16 pkt_info = rx_desc->wb.lower.lo_dword.hs_rss.pkt_info; |
| |
| return test_bit(__IXGBE_RX_FCOE, &ring->state) && |
| ((pkt_info & cpu_to_le16(IXGBE_RXDADV_PKTTYPE_ETQF_MASK)) == |
| (cpu_to_le16(IXGBE_ETQF_FILTER_FCOE << |
| IXGBE_RXDADV_PKTTYPE_ETQF_SHIFT))); |
| } |
| |
| #endif /* IXGBE_FCOE */ |
| /** |
| * ixgbe_rx_checksum - indicate in skb if hw indicated a good cksum |
| * @ring: structure containing ring specific data |
| * @rx_desc: current Rx descriptor being processed |
| * @skb: skb currently being received and modified |
| **/ |
| static inline void ixgbe_rx_checksum(struct ixgbe_ring *ring, |
| union ixgbe_adv_rx_desc *rx_desc, |
| struct sk_buff *skb) |
| { |
| __le16 pkt_info = rx_desc->wb.lower.lo_dword.hs_rss.pkt_info; |
| __le16 hdr_info = rx_desc->wb.lower.lo_dword.hs_rss.hdr_info; |
| bool encap_pkt = false; |
| |
| skb_checksum_none_assert(skb); |
| |
| /* Rx csum disabled */ |
| if (!(ring->netdev->features & NETIF_F_RXCSUM)) |
| return; |
| |
| if ((pkt_info & cpu_to_le16(IXGBE_RXDADV_PKTTYPE_VXLAN)) && |
| (hdr_info & cpu_to_le16(IXGBE_RXDADV_PKTTYPE_TUNNEL >> 16))) { |
| encap_pkt = true; |
| skb->encapsulation = 1; |
| } |
| |
| /* if IP and error */ |
| if (ixgbe_test_staterr(rx_desc, IXGBE_RXD_STAT_IPCS) && |
| ixgbe_test_staterr(rx_desc, IXGBE_RXDADV_ERR_IPE)) { |
| ring->rx_stats.csum_err++; |
| return; |
| } |
| |
| if (!ixgbe_test_staterr(rx_desc, IXGBE_RXD_STAT_L4CS)) |
| return; |
| |
| if (ixgbe_test_staterr(rx_desc, IXGBE_RXDADV_ERR_TCPE)) { |
| /* |
| * 82599 errata, UDP frames with a 0 checksum can be marked as |
| * checksum errors. |
| */ |
| if ((pkt_info & cpu_to_le16(IXGBE_RXDADV_PKTTYPE_UDP)) && |
| test_bit(__IXGBE_RX_CSUM_UDP_ZERO_ERR, &ring->state)) |
| return; |
| |
| ring->rx_stats.csum_err++; |
| return; |
| } |
| |
| /* It must be a TCP or UDP packet with a valid checksum */ |
| skb->ip_summed = CHECKSUM_UNNECESSARY; |
| if (encap_pkt) { |
| if (!ixgbe_test_staterr(rx_desc, IXGBE_RXD_STAT_OUTERIPCS)) |
| return; |
| |
| if (ixgbe_test_staterr(rx_desc, IXGBE_RXDADV_ERR_OUTERIPER)) { |
| skb->ip_summed = CHECKSUM_NONE; |
| return; |
| } |
| /* If we checked the outer header let the stack know */ |
| skb->csum_level = 1; |
| } |
| } |
| |
| static bool ixgbe_alloc_mapped_page(struct ixgbe_ring *rx_ring, |
| struct ixgbe_rx_buffer *bi) |
| { |
| struct page *page = bi->page; |
| dma_addr_t dma; |
| |
| /* since we are recycling buffers we should seldom need to alloc */ |
| if (likely(page)) |
| return true; |
| |
| /* alloc new page for storage */ |
| page = dev_alloc_pages(ixgbe_rx_pg_order(rx_ring)); |
| if (unlikely(!page)) { |
| rx_ring->rx_stats.alloc_rx_page_failed++; |
| return false; |
| } |
| |
| /* map page for use */ |
| dma = dma_map_page(rx_ring->dev, page, 0, |
| ixgbe_rx_pg_size(rx_ring), DMA_FROM_DEVICE); |
| |
| /* |
| * if mapping failed free memory back to system since |
| * there isn't much point in holding memory we can't use |
| */ |
| if (dma_mapping_error(rx_ring->dev, dma)) { |
| __free_pages(page, ixgbe_rx_pg_order(rx_ring)); |
| |
| rx_ring->rx_stats.alloc_rx_page_failed++; |
| return false; |
| } |
| |
| bi->dma = dma; |
| bi->page = page; |
| bi->page_offset = 0; |
| |
| return true; |
| } |
| |
| /** |
| * ixgbe_alloc_rx_buffers - Replace used receive buffers |
| * @rx_ring: ring to place buffers on |
| * @cleaned_count: number of buffers to replace |
| **/ |
| void ixgbe_alloc_rx_buffers(struct ixgbe_ring *rx_ring, u16 cleaned_count) |
| { |
| union ixgbe_adv_rx_desc *rx_desc; |
| struct ixgbe_rx_buffer *bi; |
| u16 i = rx_ring->next_to_use; |
| |
| /* nothing to do */ |
| if (!cleaned_count) |
| return; |
| |
| rx_desc = IXGBE_RX_DESC(rx_ring, i); |
| bi = &rx_ring->rx_buffer_info[i]; |
| i -= rx_ring->count; |
| |
| do { |
| if (!ixgbe_alloc_mapped_page(rx_ring, bi)) |
| break; |
| |
| /* |
| * Refresh the desc even if buffer_addrs didn't change |
| * because each write-back erases this info. |
| */ |
| rx_desc->read.pkt_addr = cpu_to_le64(bi->dma + bi->page_offset); |
| |
| rx_desc++; |
| bi++; |
| i++; |
| if (unlikely(!i)) { |
| rx_desc = IXGBE_RX_DESC(rx_ring, 0); |
| bi = rx_ring->rx_buffer_info; |
| i -= rx_ring->count; |
| } |
| |
| /* clear the status bits for the next_to_use descriptor */ |
| rx_desc->wb.upper.status_error = 0; |
| |
| cleaned_count--; |
| } while (cleaned_count); |
| |
| i += rx_ring->count; |
| |
| if (rx_ring->next_to_use != i) { |
| rx_ring->next_to_use = i; |
| |
| /* update next to alloc since we have filled the ring */ |
| rx_ring->next_to_alloc = i; |
| |
| /* Force memory writes to complete before letting h/w |
| * know there are new descriptors to fetch. (Only |
| * applicable for weak-ordered memory model archs, |
| * such as IA-64). |
| */ |
| wmb(); |
| writel(i, rx_ring->tail); |
| } |
| } |
| |
| static void ixgbe_set_rsc_gso_size(struct ixgbe_ring *ring, |
| struct sk_buff *skb) |
| { |
| u16 hdr_len = skb_headlen(skb); |
| |
| /* set gso_size to avoid messing up TCP MSS */ |
| skb_shinfo(skb)->gso_size = DIV_ROUND_UP((skb->len - hdr_len), |
| IXGBE_CB(skb)->append_cnt); |
| skb_shinfo(skb)->gso_type = SKB_GSO_TCPV4; |
| } |
| |
| static void ixgbe_update_rsc_stats(struct ixgbe_ring *rx_ring, |
| struct sk_buff *skb) |
| { |
| /* if append_cnt is 0 then frame is not RSC */ |
| if (!IXGBE_CB(skb)->append_cnt) |
| return; |
| |
| rx_ring->rx_stats.rsc_count += IXGBE_CB(skb)->append_cnt; |
| rx_ring->rx_stats.rsc_flush++; |
| |
| ixgbe_set_rsc_gso_size(rx_ring, skb); |
| |
| /* gso_size is computed using append_cnt so always clear it last */ |
| IXGBE_CB(skb)->append_cnt = 0; |
| } |
| |
| /** |
| * ixgbe_process_skb_fields - Populate skb header fields from Rx descriptor |
| * @rx_ring: rx descriptor ring packet is being transacted on |
| * @rx_desc: pointer to the EOP Rx descriptor |
| * @skb: pointer to current skb being populated |
| * |
| * This function checks the ring, descriptor, and packet information in |
| * order to populate the hash, checksum, VLAN, timestamp, protocol, and |
| * other fields within the skb. |
| **/ |
| static void ixgbe_process_skb_fields(struct ixgbe_ring *rx_ring, |
| union ixgbe_adv_rx_desc *rx_desc, |
| struct sk_buff *skb) |
| { |
| struct net_device *dev = rx_ring->netdev; |
| u32 flags = rx_ring->q_vector->adapter->flags; |
| |
| ixgbe_update_rsc_stats(rx_ring, skb); |
| |
| ixgbe_rx_hash(rx_ring, rx_desc, skb); |
| |
| ixgbe_rx_checksum(rx_ring, rx_desc, skb); |
| |
| if (unlikely(flags & IXGBE_FLAG_RX_HWTSTAMP_ENABLED)) |
| ixgbe_ptp_rx_hwtstamp(rx_ring, rx_desc, skb); |
| |
| if ((dev->features & NETIF_F_HW_VLAN_CTAG_RX) && |
| ixgbe_test_staterr(rx_desc, IXGBE_RXD_STAT_VP)) { |
| u16 vid = le16_to_cpu(rx_desc->wb.upper.vlan); |
| __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vid); |
| } |
| |
| skb_record_rx_queue(skb, rx_ring->queue_index); |
| |
| skb->protocol = eth_type_trans(skb, dev); |
| } |
| |
| static void ixgbe_rx_skb(struct ixgbe_q_vector *q_vector, |
| struct sk_buff *skb) |
| { |
| skb_mark_napi_id(skb, &q_vector->napi); |
| if (ixgbe_qv_busy_polling(q_vector)) |
| netif_receive_skb(skb); |
| else |
| napi_gro_receive(&q_vector->napi, skb); |
| } |
| |
| /** |
| * ixgbe_is_non_eop - process handling of non-EOP buffers |
| * @rx_ring: Rx ring being processed |
| * @rx_desc: Rx descriptor for current buffer |
| * @skb: Current socket buffer containing buffer in progress |
| * |
| * This function updates next to clean. If the buffer is an EOP buffer |
| * this function exits returning false, otherwise it will place the |
| * sk_buff in the next buffer to be chained and return true indicating |
| * that this is in fact a non-EOP buffer. |
| **/ |
| static bool ixgbe_is_non_eop(struct ixgbe_ring *rx_ring, |
| union ixgbe_adv_rx_desc *rx_desc, |
| struct sk_buff *skb) |
| { |
| u32 ntc = rx_ring->next_to_clean + 1; |
| |
| /* fetch, update, and store next to clean */ |
| ntc = (ntc < rx_ring->count) ? ntc : 0; |
| rx_ring->next_to_clean = ntc; |
| |
| prefetch(IXGBE_RX_DESC(rx_ring, ntc)); |
| |
| /* update RSC append count if present */ |
| if (ring_is_rsc_enabled(rx_ring)) { |
| __le32 rsc_enabled = rx_desc->wb.lower.lo_dword.data & |
| cpu_to_le32(IXGBE_RXDADV_RSCCNT_MASK); |
| |
| if (unlikely(rsc_enabled)) { |
| u32 rsc_cnt = le32_to_cpu(rsc_enabled); |
| |
| rsc_cnt >>= IXGBE_RXDADV_RSCCNT_SHIFT; |
| IXGBE_CB(skb)->append_cnt += rsc_cnt - 1; |
| |
| /* update ntc based on RSC value */ |
| ntc = le32_to_cpu(rx_desc->wb.upper.status_error); |
| ntc &= IXGBE_RXDADV_NEXTP_MASK; |
| ntc >>= IXGBE_RXDADV_NEXTP_SHIFT; |
| } |
| } |
| |
| /* if we are the last buffer then there is nothing else to do */ |
| if (likely(ixgbe_test_staterr(rx_desc, IXGBE_RXD_STAT_EOP))) |
| return false; |
| |
| /* place skb in next buffer to be received */ |
| rx_ring->rx_buffer_info[ntc].skb = skb; |
| rx_ring->rx_stats.non_eop_descs++; |
| |
| return true; |
| } |
| |
| /** |
| * ixgbe_pull_tail - ixgbe specific version of skb_pull_tail |
| * @rx_ring: rx descriptor ring packet is being transacted on |
| * @skb: pointer to current skb being adjusted |
| * |
| * This function is an ixgbe specific version of __pskb_pull_tail. The |
| * main difference between this version and the original function is that |
| * this function can make several assumptions about the state of things |
| * that allow for significant optimizations versus the standard function. |
| * As a result we can do things like drop a frag and maintain an accurate |
| * truesize for the skb. |
| */ |
| static void ixgbe_pull_tail(struct ixgbe_ring *rx_ring, |
| struct sk_buff *skb) |
| { |
| struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[0]; |
| unsigned char *va; |
| unsigned int pull_len; |
| |
| /* |
| * it is valid to use page_address instead of kmap since we are |
| * working with pages allocated out of the lomem pool per |
| * alloc_page(GFP_ATOMIC) |
| */ |
| va = skb_frag_address(frag); |
| |
| /* |
| * we need the header to contain the greater of either ETH_HLEN or |
| * 60 bytes if the skb->len is less than 60 for skb_pad. |
| */ |
| pull_len = eth_get_headlen(va, IXGBE_RX_HDR_SIZE); |
| |
| /* align pull length to size of long to optimize memcpy performance */ |
| skb_copy_to_linear_data(skb, va, ALIGN(pull_len, sizeof(long))); |
| |
| /* update all of the pointers */ |
| skb_frag_size_sub(frag, pull_len); |
| frag->page_offset += pull_len; |
| skb->data_len -= pull_len; |
| skb->tail += pull_len; |
| } |
| |
| /** |
| * ixgbe_dma_sync_frag - perform DMA sync for first frag of SKB |
| * @rx_ring: rx descriptor ring packet is being transacted on |
| * @skb: pointer to current skb being updated |
| * |
| * This function provides a basic DMA sync up for the first fragment of an |
| * skb. The reason for doing this is that the first fragment cannot be |
| * unmapped until we have reached the end of packet descriptor for a buffer |
| * chain. |
| */ |
| static void ixgbe_dma_sync_frag(struct ixgbe_ring *rx_ring, |
| struct sk_buff *skb) |
| { |
| /* if the page was released unmap it, else just sync our portion */ |
| if (unlikely(IXGBE_CB(skb)->page_released)) { |
| dma_unmap_page(rx_ring->dev, IXGBE_CB(skb)->dma, |
| ixgbe_rx_pg_size(rx_ring), DMA_FROM_DEVICE); |
| IXGBE_CB(skb)->page_released = false; |
| } else { |
| struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[0]; |
| |
| dma_sync_single_range_for_cpu(rx_ring->dev, |
| IXGBE_CB(skb)->dma, |
| frag->page_offset, |
| ixgbe_rx_bufsz(rx_ring), |
| DMA_FROM_DEVICE); |
| } |
| IXGBE_CB(skb)->dma = 0; |
| } |
| |
| /** |
| * ixgbe_cleanup_headers - Correct corrupted or empty headers |
| * @rx_ring: rx descriptor ring packet is being transacted on |
| * @rx_desc: pointer to the EOP Rx descriptor |
| * @skb: pointer to current skb being fixed |
| * |
| * Check for corrupted packet headers caused by senders on the local L2 |
| * embedded NIC switch not setting up their Tx Descriptors right. These |
| * should be very rare. |
| * |
| * Also address the case where we are pulling data in on pages only |
| * and as such no data is present in the skb header. |
| * |
| * In addition if skb is not at least 60 bytes we need to pad it so that |
| * it is large enough to qualify as a valid Ethernet frame. |
| * |
| * Returns true if an error was encountered and skb was freed. |
| **/ |
| static bool ixgbe_cleanup_headers(struct ixgbe_ring *rx_ring, |
| union ixgbe_adv_rx_desc *rx_desc, |
| struct sk_buff *skb) |
| { |
| struct net_device *netdev = rx_ring->netdev; |
| |
| /* verify that the packet does not have any known errors */ |
| if (unlikely(ixgbe_test_staterr(rx_desc, |
| IXGBE_RXDADV_ERR_FRAME_ERR_MASK) && |
| !(netdev->features & NETIF_F_RXALL))) { |
| dev_kfree_skb_any(skb); |
| return true; |
| } |
| |
| /* place header in linear portion of buffer */ |
| if (skb_is_nonlinear(skb)) |
| ixgbe_pull_tail(rx_ring, skb); |
| |
| #ifdef IXGBE_FCOE |
| /* do not attempt to pad FCoE Frames as this will disrupt DDP */ |
| if (ixgbe_rx_is_fcoe(rx_ring, rx_desc)) |
| return false; |
| |
| #endif |
| /* if eth_skb_pad returns an error the skb was freed */ |
| if (eth_skb_pad(skb)) |
| return true; |
| |
| return false; |
| } |
| |
| /** |
| * ixgbe_reuse_rx_page - page flip buffer and store it back on the ring |
| * @rx_ring: rx descriptor ring to store buffers on |
| * @old_buff: donor buffer to have page reused |
| * |
| * Synchronizes page for reuse by the adapter |
| **/ |
| static void ixgbe_reuse_rx_page(struct ixgbe_ring *rx_ring, |
| struct ixgbe_rx_buffer *old_buff) |
| { |
| struct ixgbe_rx_buffer *new_buff; |
| u16 nta = rx_ring->next_to_alloc; |
| |
| new_buff = &rx_ring->rx_buffer_info[nta]; |
| |
| /* update, and store next to alloc */ |
| nta++; |
| rx_ring->next_to_alloc = (nta < rx_ring->count) ? nta : 0; |
| |
| /* transfer page from old buffer to new buffer */ |
| *new_buff = *old_buff; |
| |
| /* sync the buffer for use by the device */ |
| dma_sync_single_range_for_device(rx_ring->dev, new_buff->dma, |
| new_buff->page_offset, |
| ixgbe_rx_bufsz(rx_ring), |
| DMA_FROM_DEVICE); |
| } |
| |
| static inline bool ixgbe_page_is_reserved(struct page *page) |
| { |
| return (page_to_nid(page) != numa_mem_id()) || page_is_pfmemalloc(page); |
| } |
| |
| /** |
| * ixgbe_add_rx_frag - Add contents of Rx buffer to sk_buff |
| * @rx_ring: rx descriptor ring to transact packets on |
| * @rx_buffer: buffer containing page to add |
| * @rx_desc: descriptor containing length of buffer written by hardware |
| * @skb: sk_buff to place the data into |
| * |
| * This function will add the data contained in rx_buffer->page to the skb. |
| * This is done either through a direct copy if the data in the buffer is |
| * less than the skb header size, otherwise it will just attach the page as |
| * a frag to the skb. |
| * |
| * The function will then update the page offset if necessary and return |
| * true if the buffer can be reused by the adapter. |
| **/ |
| static bool ixgbe_add_rx_frag(struct ixgbe_ring *rx_ring, |
| struct ixgbe_rx_buffer *rx_buffer, |
| union ixgbe_adv_rx_desc *rx_desc, |
| struct sk_buff *skb) |
| { |
| struct page *page = rx_buffer->page; |
| unsigned int size = le16_to_cpu(rx_desc->wb.upper.length); |
| #if (PAGE_SIZE < 8192) |
| unsigned int truesize = ixgbe_rx_bufsz(rx_ring); |
| #else |
| unsigned int truesize = ALIGN(size, L1_CACHE_BYTES); |
| unsigned int last_offset = ixgbe_rx_pg_size(rx_ring) - |
| ixgbe_rx_bufsz(rx_ring); |
| #endif |
| |
| if ((size <= IXGBE_RX_HDR_SIZE) && !skb_is_nonlinear(skb)) { |
| unsigned char *va = page_address(page) + rx_buffer->page_offset; |
| |
| memcpy(__skb_put(skb, size), va, ALIGN(size, sizeof(long))); |
| |
| /* page is not reserved, we can reuse buffer as-is */ |
| if (likely(!ixgbe_page_is_reserved(page))) |
| return true; |
| |
| /* this page cannot be reused so discard it */ |
| __free_pages(page, ixgbe_rx_pg_order(rx_ring)); |
| return false; |
| } |
| |
| skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags, page, |
| rx_buffer->page_offset, size, truesize); |
| |
| /* avoid re-using remote pages */ |
| if (unlikely(ixgbe_page_is_reserved(page))) |
| return false; |
| |
| #if (PAGE_SIZE < 8192) |
| /* if we are only owner of page we can reuse it */ |
| if (unlikely(page_count(page) != 1)) |
| return false; |
| |
| /* flip page offset to other buffer */ |
| rx_buffer->page_offset ^= truesize; |
| #else |
| /* move offset up to the next cache line */ |
| rx_buffer->page_offset += truesize; |
| |
| if (rx_buffer->page_offset > last_offset) |
| return false; |
| #endif |
| |
| /* Even if we own the page, we are not allowed to use atomic_set() |
| * This would break get_page_unless_zero() users. |
| */ |
| page_ref_inc(page); |
| |
| return true; |
| } |
| |
| static struct sk_buff *ixgbe_fetch_rx_buffer(struct ixgbe_ring *rx_ring, |
| union ixgbe_adv_rx_desc *rx_desc) |
| { |
| struct ixgbe_rx_buffer *rx_buffer; |
| struct sk_buff *skb; |
| struct page *page; |
| |
| rx_buffer = &rx_ring->rx_buffer_info[rx_ring->next_to_clean]; |
| page = rx_buffer->page; |
| prefetchw(page); |
| |
| skb = rx_buffer->skb; |
| |
| if (likely(!skb)) { |
| void *page_addr = page_address(page) + |
| rx_buffer->page_offset; |
| |
| /* prefetch first cache line of first page */ |
| prefetch(page_addr); |
| #if L1_CACHE_BYTES < 128 |
| prefetch(page_addr + L1_CACHE_BYTES); |
| #endif |
| |
| /* allocate a skb to store the frags */ |
| skb = napi_alloc_skb(&rx_ring->q_vector->napi, |
| IXGBE_RX_HDR_SIZE); |
| if (unlikely(!skb)) { |
| rx_ring->rx_stats.alloc_rx_buff_failed++; |
| return NULL; |
| } |
| |
| /* |
| * we will be copying header into skb->data in |
| * pskb_may_pull so it is in our interest to prefetch |
| * it now to avoid a possible cache miss |
| */ |
| prefetchw(skb->data); |
| |
| /* |
| * Delay unmapping of the first packet. It carries the |
| * header information, HW may still access the header |
| * after the writeback. Only unmap it when EOP is |
| * reached |
| */ |
| if (likely(ixgbe_test_staterr(rx_desc, IXGBE_RXD_STAT_EOP))) |
| goto dma_sync; |
| |
| IXGBE_CB(skb)->dma = rx_buffer->dma; |
| } else { |
| if (ixgbe_test_staterr(rx_desc, IXGBE_RXD_STAT_EOP)) |
| ixgbe_dma_sync_frag(rx_ring, skb); |
| |
| dma_sync: |
| /* we are reusing so sync this buffer for CPU use */ |
| dma_sync_single_range_for_cpu(rx_ring->dev, |
| rx_buffer->dma, |
| rx_buffer->page_offset, |
| ixgbe_rx_bufsz(rx_ring), |
| DMA_FROM_DEVICE); |
| |
| rx_buffer->skb = NULL; |
| } |
| |
| /* pull page into skb */ |
| if (ixgbe_add_rx_frag(rx_ring, rx_buffer, rx_desc, skb)) { |
| /* hand second half of page back to the ring */ |
| ixgbe_reuse_rx_page(rx_ring, rx_buffer); |
| } else if (IXGBE_CB(skb)->dma == rx_buffer->dma) { |
| /* the page has been released from the ring */ |
| IXGBE_CB(skb)->page_released = true; |
| } else { |
| /* we are not reusing the buffer so unmap it */ |
| dma_unmap_page(rx_ring->dev, rx_buffer->dma, |
| ixgbe_rx_pg_size(rx_ring), |
| DMA_FROM_DEVICE); |
| } |
| |
| /* clear contents of buffer_info */ |
| rx_buffer->page = NULL; |
| |
| return skb; |
| } |
| |
| /** |
| * ixgbe_clean_rx_irq - Clean completed descriptors from Rx ring - bounce buf |
| * @q_vector: structure containing interrupt and ring information |
| * @rx_ring: rx descriptor ring to transact packets on |
| * @budget: Total limit on number of packets to process |
| * |
| * This function provides a "bounce buffer" approach to Rx interrupt |
| * processing. The advantage to this is that on systems that have |
| * expensive overhead for IOMMU access this provides a means of avoiding |
| * it by maintaining the mapping of the page to the syste. |
| * |
| * Returns amount of work completed |
| **/ |
| static int ixgbe_clean_rx_irq(struct ixgbe_q_vector *q_vector, |
| struct ixgbe_ring *rx_ring, |
| const int budget) |
| { |
| unsigned int total_rx_bytes = 0, total_rx_packets = 0; |
| #ifdef IXGBE_FCOE |
| struct ixgbe_adapter *adapter = q_vector->adapter; |
| int ddp_bytes; |
| unsigned int mss = 0; |
| #endif /* IXGBE_FCOE */ |
| u16 cleaned_count = ixgbe_desc_unused(rx_ring); |
| |
| while (likely(total_rx_packets < budget)) { |
| union ixgbe_adv_rx_desc *rx_desc; |
| struct sk_buff *skb; |
| |
| /* return some buffers to hardware, one at a time is too slow */ |
| if (cleaned_count >= IXGBE_RX_BUFFER_WRITE) { |
| ixgbe_alloc_rx_buffers(rx_ring, cleaned_count); |
| cleaned_count = 0; |
| } |
| |
| rx_desc = IXGBE_RX_DESC(rx_ring, rx_ring->next_to_clean); |
| |
| if (!rx_desc->wb.upper.status_error) |
| break; |
| |
| /* This memory barrier is needed to keep us from reading |
| * any other fields out of the rx_desc until we know the |
| * descriptor has been written back |
| */ |
| dma_rmb(); |
| |
| /* retrieve a buffer from the ring */ |
| skb = ixgbe_fetch_rx_buffer(rx_ring, rx_desc); |
| |
| /* exit if we failed to retrieve a buffer */ |
| if (!skb) |
| break; |
| |
| cleaned_count++; |
| |
| /* place incomplete frames back on ring for completion */ |
| if (ixgbe_is_non_eop(rx_ring, rx_desc, skb)) |
| continue; |
| |
| /* verify the packet layout is correct */ |
| if (ixgbe_cleanup_headers(rx_ring, rx_desc, skb)) |
| continue; |
| |
| /* probably a little skewed due to removing CRC */ |
| total_rx_bytes += skb->len; |
| |
| /* populate checksum, timestamp, VLAN, and protocol */ |
| ixgbe_process_skb_fields(rx_ring, rx_desc, skb); |
| |
| #ifdef IXGBE_FCOE |
| /* if ddp, not passing to ULD unless for FCP_RSP or error */ |
| if (ixgbe_rx_is_fcoe(rx_ring, rx_desc)) { |
| ddp_bytes = ixgbe_fcoe_ddp(adapter, rx_desc, skb); |
| /* include DDPed FCoE data */ |
| if (ddp_bytes > 0) { |
| if (!mss) { |
| mss = rx_ring->netdev->mtu - |
| sizeof(struct fcoe_hdr) - |
| sizeof(struct fc_frame_header) - |
| sizeof(struct fcoe_crc_eof); |
| if (mss > 512) |
| mss &= ~511; |
| } |
| total_rx_bytes += ddp_bytes; |
| total_rx_packets += DIV_ROUND_UP(ddp_bytes, |
| mss); |
| } |
| if (!ddp_bytes) { |
| dev_kfree_skb_any(skb); |
| continue; |
| } |
| } |
| |
| #endif /* IXGBE_FCOE */ |
| ixgbe_rx_skb(q_vector, skb); |
| |
| /* update budget accounting */ |
| total_rx_packets++; |
| } |
| |
| u64_stats_update_begin(&rx_ring->syncp); |
| rx_ring->stats.packets += total_rx_packets; |
| rx_ring->stats.bytes += total_rx_bytes; |
| u64_stats_update_end(&rx_ring->syncp); |
| q_vector->rx.total_packets += total_rx_packets; |
| q_vector->rx.total_bytes += total_rx_bytes; |
| |
| return total_rx_packets; |
| } |
| |
| #ifdef CONFIG_NET_RX_BUSY_POLL |
| /* must be called with local_bh_disable()d */ |
| static int ixgbe_low_latency_recv(struct napi_struct *napi) |
| { |
| struct ixgbe_q_vector *q_vector = |
| container_of(napi, struct ixgbe_q_vector, napi); |
| struct ixgbe_adapter *adapter = q_vector->adapter; |
| struct ixgbe_ring *ring; |
| int found = 0; |
| |
| if (test_bit(__IXGBE_DOWN, &adapter->state)) |
| return LL_FLUSH_FAILED; |
| |
| if (!ixgbe_qv_lock_poll(q_vector)) |
| return LL_FLUSH_BUSY; |
| |
| ixgbe_for_each_ring(ring, q_vector->rx) { |
| found = ixgbe_clean_rx_irq(q_vector, ring, 4); |
| #ifdef BP_EXTENDED_STATS |
| if (found) |
| ring->stats.cleaned += found; |
| else |
| ring->stats.misses++; |
| #endif |
| if (found) |
| break; |
| } |
| |
| ixgbe_qv_unlock_poll(q_vector); |
| |
| return found; |
| } |
| #endif /* CONFIG_NET_RX_BUSY_POLL */ |
| |
| /** |
| * ixgbe_configure_msix - Configure MSI-X hardware |
| * @adapter: board private structure |
| * |
| * ixgbe_configure_msix sets up the hardware to properly generate MSI-X |
| * interrupts. |
| **/ |
| static void ixgbe_configure_msix(struct ixgbe_adapter *adapter) |
| { |
| struct ixgbe_q_vector *q_vector; |
| int v_idx; |
| u32 mask; |
| |
| /* Populate MSIX to EITR Select */ |
| if (adapter->num_vfs > 32) { |
| u32 eitrsel = (1 << (adapter->num_vfs - 32)) - 1; |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_EITRSEL, eitrsel); |
| } |
| |
| /* |
| * Populate the IVAR table and set the ITR values to the |
| * corresponding register. |
| */ |
| for (v_idx = 0; v_idx < adapter->num_q_vectors; v_idx++) { |
| struct ixgbe_ring *ring; |
| q_vector = adapter->q_vector[v_idx]; |
| |
| ixgbe_for_each_ring(ring, q_vector->rx) |
| ixgbe_set_ivar(adapter, 0, ring->reg_idx, v_idx); |
| |
| ixgbe_for_each_ring(ring, q_vector->tx) |
| ixgbe_set_ivar(adapter, 1, ring->reg_idx, v_idx); |
| |
| ixgbe_write_eitr(q_vector); |
| } |
| |
| switch (adapter->hw.mac.type) { |
| case ixgbe_mac_82598EB: |
| ixgbe_set_ivar(adapter, -1, IXGBE_IVAR_OTHER_CAUSES_INDEX, |
| v_idx); |
| break; |
| case ixgbe_mac_82599EB: |
| case ixgbe_mac_X540: |
| case ixgbe_mac_X550: |
| case ixgbe_mac_X550EM_x: |
| ixgbe_set_ivar(adapter, -1, 1, v_idx); |
| break; |
| default: |
| break; |
| } |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_EITR(v_idx), 1950); |
| |
| /* set up to autoclear timer, and the vectors */ |
| mask = IXGBE_EIMS_ENABLE_MASK; |
| mask &= ~(IXGBE_EIMS_OTHER | |
| IXGBE_EIMS_MAILBOX | |
| IXGBE_EIMS_LSC); |
| |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIAC, mask); |
| } |
| |
| enum latency_range { |
| lowest_latency = 0, |
| low_latency = 1, |
| bulk_latency = 2, |
| latency_invalid = 255 |
| }; |
| |
| /** |
| * ixgbe_update_itr - update the dynamic ITR value based on statistics |
| * @q_vector: structure containing interrupt and ring information |
| * @ring_container: structure containing ring performance data |
| * |
| * Stores a new ITR value based on packets and byte |
| * counts during the last interrupt. The advantage of per interrupt |
| * computation is faster updates and more accurate ITR for the current |
| * traffic pattern. Constants in this function were computed |
| * based on theoretical maximum wire speed and thresholds were set based |
| * on testing data as well as attempting to minimize response time |
| * while increasing bulk throughput. |
| * this functionality is controlled by the InterruptThrottleRate module |
| * parameter (see ixgbe_param.c) |
| **/ |
| static void ixgbe_update_itr(struct ixgbe_q_vector *q_vector, |
| struct ixgbe_ring_container *ring_container) |
| { |
| int bytes = ring_container->total_bytes; |
| int packets = ring_container->total_packets; |
| u32 timepassed_us; |
| u64 bytes_perint; |
| u8 itr_setting = ring_container->itr; |
| |
| if (packets == 0) |
| return; |
| |
| /* simple throttlerate management |
| * 0-10MB/s lowest (100000 ints/s) |
| * 10-20MB/s low (20000 ints/s) |
| * 20-1249MB/s bulk (12000 ints/s) |
| */ |
| /* what was last interrupt timeslice? */ |
| timepassed_us = q_vector->itr >> 2; |
| if (timepassed_us == 0) |
| return; |
| |
| bytes_perint = bytes / timepassed_us; /* bytes/usec */ |
| |
| switch (itr_setting) { |
| case lowest_latency: |
| if (bytes_perint > 10) |
| itr_setting = low_latency; |
| break; |
| case low_latency: |
| if (bytes_perint > 20) |
| itr_setting = bulk_latency; |
| else if (bytes_perint <= 10) |
| itr_setting = lowest_latency; |
| break; |
| case bulk_latency: |
| if (bytes_perint <= 20) |
| itr_setting = low_latency; |
| break; |
| } |
| |
| /* clear work counters since we have the values we need */ |
| ring_container->total_bytes = 0; |
| ring_container->total_packets = 0; |
| |
| /* write updated itr to ring container */ |
| ring_container->itr = itr_setting; |
| } |
| |
| /** |
| * ixgbe_write_eitr - write EITR register in hardware specific way |
| * @q_vector: structure containing interrupt and ring information |
| * |
| * This function is made to be called by ethtool and by the driver |
| * when it needs to update EITR registers at runtime. Hardware |
| * specific quirks/differences are taken care of here. |
| */ |
| void ixgbe_write_eitr(struct ixgbe_q_vector *q_vector) |
| { |
| struct ixgbe_adapter *adapter = q_vector->adapter; |
| struct ixgbe_hw *hw = &adapter->hw; |
| int v_idx = q_vector->v_idx; |
| u32 itr_reg = q_vector->itr & IXGBE_MAX_EITR; |
| |
| switch (adapter->hw.mac.type) { |
| case ixgbe_mac_82598EB: |
| /* must write high and low 16 bits to reset counter */ |
| itr_reg |= (itr_reg << 16); |
| break; |
| case ixgbe_mac_82599EB: |
| case ixgbe_mac_X540: |
| case ixgbe_mac_X550: |
| case ixgbe_mac_X550EM_x: |
| /* |
| * set the WDIS bit to not clear the timer bits and cause an |
| * immediate assertion of the interrupt |
| */ |
| itr_reg |= IXGBE_EITR_CNT_WDIS; |
| break; |
| default: |
| break; |
| } |
| IXGBE_WRITE_REG(hw, IXGBE_EITR(v_idx), itr_reg); |
| } |
| |
| static void ixgbe_set_itr(struct ixgbe_q_vector *q_vector) |
| { |
| u32 new_itr = q_vector->itr; |
| u8 current_itr; |
| |
| ixgbe_update_itr(q_vector, &q_vector->tx); |
| ixgbe_update_itr(q_vector, &q_vector->rx); |
| |
| current_itr = max(q_vector->rx.itr, q_vector->tx.itr); |
| |
| switch (current_itr) { |
| /* counts and packets in update_itr are dependent on these numbers */ |
| case lowest_latency: |
| new_itr = IXGBE_100K_ITR; |
| break; |
| case low_latency: |
| new_itr = IXGBE_20K_ITR; |
| break; |
| case bulk_latency: |
| new_itr = IXGBE_12K_ITR; |
| break; |
| default: |
| break; |
| } |
| |
| if (new_itr != q_vector->itr) { |
| /* do an exponential smoothing */ |
| new_itr = (10 * new_itr * q_vector->itr) / |
| ((9 * new_itr) + q_vector->itr); |
| |
| /* save the algorithm value here */ |
| q_vector->itr = new_itr; |
| |
| ixgbe_write_eitr(q_vector); |
| } |
| } |
| |
| /** |
| * ixgbe_check_overtemp_subtask - check for over temperature |
| * @adapter: pointer to adapter |
| **/ |
| static void ixgbe_check_overtemp_subtask(struct ixgbe_adapter *adapter) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| u32 eicr = adapter->interrupt_event; |
| |
| if (test_bit(__IXGBE_DOWN, &adapter->state)) |
| return; |
| |
| if (!(adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_CAPABLE) && |
| !(adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_EVENT)) |
| return; |
| |
| adapter->flags2 &= ~IXGBE_FLAG2_TEMP_SENSOR_EVENT; |
| |
| switch (hw->device_id) { |
| case IXGBE_DEV_ID_82599_T3_LOM: |
| /* |
| * Since the warning interrupt is for both ports |
| * we don't have to check if: |
| * - This interrupt wasn't for our port. |
| * - We may have missed the interrupt so always have to |
| * check if we got a LSC |
| */ |
| if (!(eicr & IXGBE_EICR_GPI_SDP0_8259X) && |
| !(eicr & IXGBE_EICR_LSC)) |
| return; |
| |
| if (!(eicr & IXGBE_EICR_LSC) && hw->mac.ops.check_link) { |
| u32 speed; |
| bool link_up = false; |
| |
| hw->mac.ops.check_link(hw, &speed, &link_up, false); |
| |
| if (link_up) |
| return; |
| } |
| |
| /* Check if this is not due to overtemp */ |
| if (hw->phy.ops.check_overtemp(hw) != IXGBE_ERR_OVERTEMP) |
| return; |
| |
| break; |
| default: |
| if (adapter->hw.mac.type >= ixgbe_mac_X540) |
| return; |
| if (!(eicr & IXGBE_EICR_GPI_SDP0(hw))) |
| return; |
| break; |
| } |
| e_crit(drv, "%s\n", ixgbe_overheat_msg); |
| |
| adapter->interrupt_event = 0; |
| } |
| |
| static void ixgbe_check_fan_failure(struct ixgbe_adapter *adapter, u32 eicr) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| |
| if ((adapter->flags & IXGBE_FLAG_FAN_FAIL_CAPABLE) && |
| (eicr & IXGBE_EICR_GPI_SDP1(hw))) { |
| e_crit(probe, "Fan has stopped, replace the adapter\n"); |
| /* write to clear the interrupt */ |
| IXGBE_WRITE_REG(hw, IXGBE_EICR, IXGBE_EICR_GPI_SDP1(hw)); |
| } |
| } |
| |
| static void ixgbe_check_overtemp_event(struct ixgbe_adapter *adapter, u32 eicr) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| |
| if (!(adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_CAPABLE)) |
| return; |
| |
| switch (adapter->hw.mac.type) { |
| case ixgbe_mac_82599EB: |
| /* |
| * Need to check link state so complete overtemp check |
| * on service task |
| */ |
| if (((eicr & IXGBE_EICR_GPI_SDP0(hw)) || |
| (eicr & IXGBE_EICR_LSC)) && |
| (!test_bit(__IXGBE_DOWN, &adapter->state))) { |
| adapter->interrupt_event = eicr; |
| adapter->flags2 |= IXGBE_FLAG2_TEMP_SENSOR_EVENT; |
| ixgbe_service_event_schedule(adapter); |
| return; |
| } |
| return; |
| case ixgbe_mac_X540: |
| if (!(eicr & IXGBE_EICR_TS)) |
| return; |
| break; |
| default: |
| return; |
| } |
| |
| e_crit(drv, "%s\n", ixgbe_overheat_msg); |
| } |
| |
| static inline bool ixgbe_is_sfp(struct ixgbe_hw *hw) |
| { |
| switch (hw->mac.type) { |
| case ixgbe_mac_82598EB: |
| if (hw->phy.type == ixgbe_phy_nl) |
| return true; |
| return false; |
| case ixgbe_mac_82599EB: |
| case ixgbe_mac_X550EM_x: |
| switch (hw->mac.ops.get_media_type(hw)) { |
| case ixgbe_media_type_fiber: |
| case ixgbe_media_type_fiber_qsfp: |
| return true; |
| default: |
| return false; |
| } |
| default: |
| return false; |
| } |
| } |
| |
| static void ixgbe_check_sfp_event(struct ixgbe_adapter *adapter, u32 eicr) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| u32 eicr_mask = IXGBE_EICR_GPI_SDP2(hw); |
| |
| if (!ixgbe_is_sfp(hw)) |
| return; |
| |
| /* Later MAC's use different SDP */ |
| if (hw->mac.type >= ixgbe_mac_X540) |
| eicr_mask = IXGBE_EICR_GPI_SDP0_X540; |
| |
| if (eicr & eicr_mask) { |
| /* Clear the interrupt */ |
| IXGBE_WRITE_REG(hw, IXGBE_EICR, eicr_mask); |
| if (!test_bit(__IXGBE_DOWN, &adapter->state)) { |
| adapter->flags2 |= IXGBE_FLAG2_SFP_NEEDS_RESET; |
| adapter->sfp_poll_time = 0; |
| ixgbe_service_event_schedule(adapter); |
| } |
| } |
| |
| if (adapter->hw.mac.type == ixgbe_mac_82599EB && |
| (eicr & IXGBE_EICR_GPI_SDP1(hw))) { |
| /* Clear the interrupt */ |
| IXGBE_WRITE_REG(hw, IXGBE_EICR, IXGBE_EICR_GPI_SDP1(hw)); |
| if (!test_bit(__IXGBE_DOWN, &adapter->state)) { |
| adapter->flags |= IXGBE_FLAG_NEED_LINK_CONFIG; |
| ixgbe_service_event_schedule(adapter); |
| } |
| } |
| } |
| |
| static void ixgbe_check_lsc(struct ixgbe_adapter *adapter) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| |
| adapter->lsc_int++; |
| adapter->flags |= IXGBE_FLAG_NEED_LINK_UPDATE; |
| adapter->link_check_timeout = jiffies; |
| if (!test_bit(__IXGBE_DOWN, &adapter->state)) { |
| IXGBE_WRITE_REG(hw, IXGBE_EIMC, IXGBE_EIMC_LSC); |
| IXGBE_WRITE_FLUSH(hw); |
| ixgbe_service_event_schedule(adapter); |
| } |
| } |
| |
| static inline void ixgbe_irq_enable_queues(struct ixgbe_adapter *adapter, |
| u64 qmask) |
| { |
| u32 mask; |
| struct ixgbe_hw *hw = &adapter->hw; |
| |
| switch (hw->mac.type) { |
| case ixgbe_mac_82598EB: |
| mask = (IXGBE_EIMS_RTX_QUEUE & qmask); |
| IXGBE_WRITE_REG(hw, IXGBE_EIMS, mask); |
| break; |
| case ixgbe_mac_82599EB: |
| case ixgbe_mac_X540: |
| case ixgbe_mac_X550: |
| case ixgbe_mac_X550EM_x: |
| mask = (qmask & 0xFFFFFFFF); |
| if (mask) |
| IXGBE_WRITE_REG(hw, IXGBE_EIMS_EX(0), mask); |
| mask = (qmask >> 32); |
| if (mask) |
| IXGBE_WRITE_REG(hw, IXGBE_EIMS_EX(1), mask); |
| break; |
| default: |
| break; |
| } |
| /* skip the flush */ |
| } |
| |
| static inline void ixgbe_irq_disable_queues(struct ixgbe_adapter *adapter, |
| u64 qmask) |
| { |
| u32 mask; |
| struct ixgbe_hw *hw = &adapter->hw; |
| |
| switch (hw->mac.type) { |
| case ixgbe_mac_82598EB: |
| mask = (IXGBE_EIMS_RTX_QUEUE & qmask); |
| IXGBE_WRITE_REG(hw, IXGBE_EIMC, mask); |
| break; |
| case ixgbe_mac_82599EB: |
| case ixgbe_mac_X540: |
| case ixgbe_mac_X550: |
| case ixgbe_mac_X550EM_x: |
| mask = (qmask & 0xFFFFFFFF); |
| if (mask) |
| IXGBE_WRITE_REG(hw, IXGBE_EIMC_EX(0), mask); |
| mask = (qmask >> 32); |
| if (mask) |
| IXGBE_WRITE_REG(hw, IXGBE_EIMC_EX(1), mask); |
| break; |
| default: |
| break; |
| } |
| /* skip the flush */ |
| } |
| |
| /** |
| * ixgbe_irq_enable - Enable default interrupt generation settings |
| * @adapter: board private structure |
| **/ |
| static inline void ixgbe_irq_enable(struct ixgbe_adapter *adapter, bool queues, |
| bool flush) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| u32 mask = (IXGBE_EIMS_ENABLE_MASK & ~IXGBE_EIMS_RTX_QUEUE); |
| |
| /* don't reenable LSC while waiting for link */ |
| if (adapter->flags & IXGBE_FLAG_NEED_LINK_UPDATE) |
| mask &= ~IXGBE_EIMS_LSC; |
| |
| if (adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_CAPABLE) |
| switch (adapter->hw.mac.type) { |
| case ixgbe_mac_82599EB: |
| mask |= IXGBE_EIMS_GPI_SDP0(hw); |
| break; |
| case ixgbe_mac_X540: |
| case ixgbe_mac_X550: |
| case ixgbe_mac_X550EM_x: |
| mask |= IXGBE_EIMS_TS; |
| break; |
| default: |
| break; |
| } |
| if (adapter->flags & IXGBE_FLAG_FAN_FAIL_CAPABLE) |
| mask |= IXGBE_EIMS_GPI_SDP1(hw); |
| switch (adapter->hw.mac.type) { |
| case ixgbe_mac_82599EB: |
| mask |= IXGBE_EIMS_GPI_SDP1(hw); |
| mask |= IXGBE_EIMS_GPI_SDP2(hw); |
| /* fall through */ |
| case ixgbe_mac_X540: |
| case ixgbe_mac_X550: |
| case ixgbe_mac_X550EM_x: |
| if (adapter->hw.device_id == IXGBE_DEV_ID_X550EM_X_SFP) |
| mask |= IXGBE_EIMS_GPI_SDP0(&adapter->hw); |
| if (adapter->hw.phy.type == ixgbe_phy_x550em_ext_t) |
| mask |= IXGBE_EICR_GPI_SDP0_X540; |
| mask |= IXGBE_EIMS_ECC; |
| mask |= IXGBE_EIMS_MAILBOX; |
| break; |
| default: |
| break; |
| } |
| |
| if ((adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) && |
| !(adapter->flags2 & IXGBE_FLAG2_FDIR_REQUIRES_REINIT)) |
| mask |= IXGBE_EIMS_FLOW_DIR; |
| |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS, mask); |
| if (queues) |
| ixgbe_irq_enable_queues(adapter, ~0); |
| if (flush) |
| IXGBE_WRITE_FLUSH(&adapter->hw); |
| } |
| |
| static irqreturn_t ixgbe_msix_other(int irq, void *data) |
| { |
| struct ixgbe_adapter *adapter = data; |
| struct ixgbe_hw *hw = &adapter->hw; |
| u32 eicr; |
| |
| /* |
| * Workaround for Silicon errata. Use clear-by-write instead |
| * of clear-by-read. Reading with EICS will return the |
| * interrupt causes without clearing, which later be done |
| * with the write to EICR. |
| */ |
| eicr = IXGBE_READ_REG(hw, IXGBE_EICS); |
| |
| /* The lower 16bits of the EICR register are for the queue interrupts |
| * which should be masked here in order to not accidentally clear them if |
| * the bits are high when ixgbe_msix_other is called. There is a race |
| * condition otherwise which results in possible performance loss |
| * especially if the ixgbe_msix_other interrupt is triggering |
| * consistently (as it would when PPS is turned on for the X540 device) |
| */ |
| eicr &= 0xFFFF0000; |
| |
| IXGBE_WRITE_REG(hw, IXGBE_EICR, eicr); |
| |
| if (eicr & IXGBE_EICR_LSC) |
| ixgbe_check_lsc(adapter); |
| |
| if (eicr & IXGBE_EICR_MAILBOX) |
| ixgbe_msg_task(adapter); |
| |
| switch (hw->mac.type) { |
| case ixgbe_mac_82599EB: |
| case ixgbe_mac_X540: |
| case ixgbe_mac_X550: |
| case ixgbe_mac_X550EM_x: |
| if (hw->phy.type == ixgbe_phy_x550em_ext_t && |
| (eicr & IXGBE_EICR_GPI_SDP0_X540)) { |
| adapter->flags2 |= IXGBE_FLAG2_PHY_INTERRUPT; |
| ixgbe_service_event_schedule(adapter); |
| IXGBE_WRITE_REG(hw, IXGBE_EICR, |
| IXGBE_EICR_GPI_SDP0_X540); |
| } |
| if (eicr & IXGBE_EICR_ECC) { |
| e_info(link, "Received ECC Err, initiating reset\n"); |
| adapter->flags2 |= IXGBE_FLAG2_RESET_REQUESTED; |
| ixgbe_service_event_schedule(adapter); |
| IXGBE_WRITE_REG(hw, IXGBE_EICR, IXGBE_EICR_ECC); |
| } |
| /* Handle Flow Director Full threshold interrupt */ |
| if (eicr & IXGBE_EICR_FLOW_DIR) { |
| int reinit_count = 0; |
| int i; |
| for (i = 0; i < adapter->num_tx_queues; i++) { |
| struct ixgbe_ring *ring = adapter->tx_ring[i]; |
| if (test_and_clear_bit(__IXGBE_TX_FDIR_INIT_DONE, |
| &ring->state)) |
| reinit_count++; |
| } |
| if (reinit_count) { |
| /* no more flow director interrupts until after init */ |
| IXGBE_WRITE_REG(hw, IXGBE_EIMC, IXGBE_EIMC_FLOW_DIR); |
| adapter->flags2 |= IXGBE_FLAG2_FDIR_REQUIRES_REINIT; |
| ixgbe_service_event_schedule(adapter); |
| } |
| } |
| ixgbe_check_sfp_event(adapter, eicr); |
| ixgbe_check_overtemp_event(adapter, eicr); |
| break; |
| default: |
| break; |
| } |
| |
| ixgbe_check_fan_failure(adapter, eicr); |
| |
| if (unlikely(eicr & IXGBE_EICR_TIMESYNC)) |
| ixgbe_ptp_check_pps_event(adapter); |
| |
| /* re-enable the original interrupt state, no lsc, no queues */ |
| if (!test_bit(__IXGBE_DOWN, &adapter->state)) |
| ixgbe_irq_enable(adapter, false, false); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static irqreturn_t ixgbe_msix_clean_rings(int irq, void *data) |
| { |
| struct ixgbe_q_vector *q_vector = data; |
| |
| /* EIAM disabled interrupts (on this vector) for us */ |
| |
| if (q_vector->rx.ring || q_vector->tx.ring) |
| napi_schedule_irqoff(&q_vector->napi); |
| |
| return IRQ_HANDLED; |
| } |
| |
| /** |
| * ixgbe_poll - NAPI Rx polling callback |
| * @napi: structure for representing this polling device |
| * @budget: how many packets driver is allowed to clean |
| * |
| * This function is used for legacy and MSI, NAPI mode |
| **/ |
| int ixgbe_poll(struct napi_struct *napi, int budget) |
| { |
| struct ixgbe_q_vector *q_vector = |
| container_of(napi, struct ixgbe_q_vector, napi); |
| struct ixgbe_adapter *adapter = q_vector->adapter; |
| struct ixgbe_ring *ring; |
| int per_ring_budget, work_done = 0; |
| bool clean_complete = true; |
| |
| #ifdef CONFIG_IXGBE_DCA |
| if (adapter->flags & IXGBE_FLAG_DCA_ENABLED) |
| ixgbe_update_dca(q_vector); |
| #endif |
| |
| ixgbe_for_each_ring(ring, q_vector->tx) |
| clean_complete &= !!ixgbe_clean_tx_irq(q_vector, ring, budget); |
| |
| /* Exit if we are called by netpoll or busy polling is active */ |
| if ((budget <= 0) || !ixgbe_qv_lock_napi(q_vector)) |
| return budget; |
| |
| /* attempt to distribute budget to each queue fairly, but don't allow |
| * the budget to go below 1 because we'll exit polling */ |
| if (q_vector->rx.count > 1) |
| per_ring_budget = max(budget/q_vector->rx.count, 1); |
| else |
| per_ring_budget = budget; |
| |
| ixgbe_for_each_ring(ring, q_vector->rx) { |
| int cleaned = ixgbe_clean_rx_irq(q_vector, ring, |
| per_ring_budget); |
| |
| work_done += cleaned; |
| clean_complete &= (cleaned < per_ring_budget); |
| } |
| |
| ixgbe_qv_unlock_napi(q_vector); |
| /* If all work not completed, return budget and keep polling */ |
| if (!clean_complete) |
| return budget; |
| |
| /* all work done, exit the polling mode */ |
| napi_complete_done(napi, work_done); |
| if (adapter->rx_itr_setting & 1) |
| ixgbe_set_itr(q_vector); |
| if (!test_bit(__IXGBE_DOWN, &adapter->state)) |
| ixgbe_irq_enable_queues(adapter, ((u64)1 << q_vector->v_idx)); |
| |
| return 0; |
| } |
| |
| /** |
| * ixgbe_request_msix_irqs - Initialize MSI-X interrupts |
| * @adapter: board private structure |
| * |
| * ixgbe_request_msix_irqs allocates MSI-X vectors and requests |
| * interrupts from the kernel. |
| **/ |
| static int ixgbe_request_msix_irqs(struct ixgbe_adapter *adapter) |
| { |
| struct net_device *netdev = adapter->netdev; |
| int vector, err; |
| int ri = 0, ti = 0; |
| |
| for (vector = 0; vector < adapter->num_q_vectors; vector++) { |
| struct ixgbe_q_vector *q_vector = adapter->q_vector[vector]; |
| struct msix_entry *entry = &adapter->msix_entries[vector]; |
| |
| if (q_vector->tx.ring && q_vector->rx.ring) { |
| snprintf(q_vector->name, sizeof(q_vector->name) - 1, |
| "%s-%s-%d", netdev->name, "TxRx", ri++); |
| ti++; |
| } else if (q_vector->rx.ring) { |
| snprintf(q_vector->name, sizeof(q_vector->name) - 1, |
| "%s-%s-%d", netdev->name, "rx", ri++); |
| } else if (q_vector->tx.ring) { |
| snprintf(q_vector->name, sizeof(q_vector->name) - 1, |
| "%s-%s-%d", netdev->name, "tx", ti++); |
| } else { |
| /* skip this unused q_vector */ |
| continue; |
| } |
| err = request_irq(entry->vector, &ixgbe_msix_clean_rings, 0, |
| q_vector->name, q_vector); |
| if (err) { |
| e_err(probe, "request_irq failed for MSIX interrupt " |
| "Error: %d\n", err); |
| goto free_queue_irqs; |
| } |
| /* If Flow Director is enabled, set interrupt affinity */ |
| if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) { |
| /* assign the mask for this irq */ |
| irq_set_affinity_hint(entry->vector, |
| &q_vector->affinity_mask); |
| } |
| } |
| |
| err = request_irq(adapter->msix_entries[vector].vector, |
| ixgbe_msix_other, 0, netdev->name, adapter); |
| if (err) { |
| e_err(probe, "request_irq for msix_other failed: %d\n", err); |
| goto free_queue_irqs; |
| } |
| |
| return 0; |
| |
| free_queue_irqs: |
| while (vector) { |
| vector--; |
| irq_set_affinity_hint(adapter->msix_entries[vector].vector, |
| NULL); |
| free_irq(adapter->msix_entries[vector].vector, |
| adapter->q_vector[vector]); |
| } |
| adapter->flags &= ~IXGBE_FLAG_MSIX_ENABLED; |
| pci_disable_msix(adapter->pdev); |
| kfree(adapter->msix_entries); |
| adapter->msix_entries = NULL; |
| return err; |
| } |
| |
| /** |
| * ixgbe_intr - legacy mode Interrupt Handler |
| * @irq: interrupt number |
| * @data: pointer to a network interface device structure |
| **/ |
| static irqreturn_t ixgbe_intr(int irq, void *data) |
| { |
| struct ixgbe_adapter *adapter = data; |
| struct ixgbe_hw *hw = &adapter->hw; |
| struct ixgbe_q_vector *q_vector = adapter->q_vector[0]; |
| u32 eicr; |
| |
| /* |
| * Workaround for silicon errata #26 on 82598. Mask the interrupt |
| * before the read of EICR. |
| */ |
| IXGBE_WRITE_REG(hw, IXGBE_EIMC, IXGBE_IRQ_CLEAR_MASK); |
| |
| /* for NAPI, using EIAM to auto-mask tx/rx interrupt bits on read |
| * therefore no explicit interrupt disable is necessary */ |
| eicr = IXGBE_READ_REG(hw, IXGBE_EICR); |
| if (!eicr) { |
| /* |
| * shared interrupt alert! |
| * make sure interrupts are enabled because the read will |
| * have disabled interrupts due to EIAM |
| * finish the workaround of silicon errata on 82598. Unmask |
| * the interrupt that we masked before the EICR read. |
| */ |
| if (!test_bit(__IXGBE_DOWN, &adapter->state)) |
| ixgbe_irq_enable(adapter, true, true); |
| return IRQ_NONE; /* Not our interrupt */ |
| } |
| |
| if (eicr & IXGBE_EICR_LSC) |
| ixgbe_check_lsc(adapter); |
| |
| switch (hw->mac.type) { |
| case ixgbe_mac_82599EB: |
| ixgbe_check_sfp_event(adapter, eicr); |
| /* Fall through */ |
| case ixgbe_mac_X540: |
| case ixgbe_mac_X550: |
| case ixgbe_mac_X550EM_x: |
| if (eicr & IXGBE_EICR_ECC) { |
| e_info(link, "Received ECC Err, initiating reset\n"); |
| adapter->flags2 |= IXGBE_FLAG2_RESET_REQUESTED; |
| ixgbe_service_event_schedule(adapter); |
| IXGBE_WRITE_REG(hw, IXGBE_EICR, IXGBE_EICR_ECC); |
| } |
| ixgbe_check_overtemp_event(adapter, eicr); |
| break; |
| default: |
| break; |
| } |
| |
| ixgbe_check_fan_failure(adapter, eicr); |
| if (unlikely(eicr & IXGBE_EICR_TIMESYNC)) |
| ixgbe_ptp_check_pps_event(adapter); |
| |
| /* would disable interrupts here but EIAM disabled it */ |
| napi_schedule_irqoff(&q_vector->napi); |
| |
| /* |
| * re-enable link(maybe) and non-queue interrupts, no flush. |
| * ixgbe_poll will re-enable the queue interrupts |
| */ |
| if (!test_bit(__IXGBE_DOWN, &adapter->state)) |
| ixgbe_irq_enable(adapter, false, false); |
| |
| return IRQ_HANDLED; |
| } |
| |
| /** |
| * ixgbe_request_irq - initialize interrupts |
| * @adapter: board private structure |
| * |
| * Attempts to configure interrupts using the best available |
| * capabilities of the hardware and kernel. |
| **/ |
| static int ixgbe_request_irq(struct ixgbe_adapter *adapter) |
| { |
| struct net_device *netdev = adapter->netdev; |
| int err; |
| |
| if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) |
| err = ixgbe_request_msix_irqs(adapter); |
| else if (adapter->flags & IXGBE_FLAG_MSI_ENABLED) |
| err = request_irq(adapter->pdev->irq, ixgbe_intr, 0, |
| netdev->name, adapter); |
| else |
| err = request_irq(adapter->pdev->irq, ixgbe_intr, IRQF_SHARED, |
| netdev->name, adapter); |
| |
| if (err) |
| e_err(probe, "request_irq failed, Error %d\n", err); |
| |
| return err; |
| } |
| |
| static void ixgbe_free_irq(struct ixgbe_adapter *adapter) |
| { |
| int vector; |
| |
| if (!(adapter->flags & IXGBE_FLAG_MSIX_ENABLED)) { |
| free_irq(adapter->pdev->irq, adapter); |
| return; |
| } |
| |
| for (vector = 0; vector < adapter->num_q_vectors; vector++) { |
| struct ixgbe_q_vector *q_vector = adapter->q_vector[vector]; |
| struct msix_entry *entry = &adapter->msix_entries[vector]; |
| |
| /* free only the irqs that were actually requested */ |
| if (!q_vector->rx.ring && !q_vector->tx.ring) |
| continue; |
| |
| /* clear the affinity_mask in the IRQ descriptor */ |
| irq_set_affinity_hint(entry->vector, NULL); |
| |
| free_irq(entry->vector, q_vector); |
| } |
| |
| free_irq(adapter->msix_entries[vector++].vector, adapter); |
| } |
| |
| /** |
| * ixgbe_irq_disable - Mask off interrupt generation on the NIC |
| * @adapter: board private structure |
| **/ |
| static inline void ixgbe_irq_disable(struct ixgbe_adapter *adapter) |
| { |
| switch (adapter->hw.mac.type) { |
| case ixgbe_mac_82598EB: |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, ~0); |
| break; |
| case ixgbe_mac_82599EB: |
| case ixgbe_mac_X540: |
| case ixgbe_mac_X550: |
| case ixgbe_mac_X550EM_x: |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, 0xFFFF0000); |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC_EX(0), ~0); |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC_EX(1), ~0); |
| break; |
| default: |
| break; |
| } |
| IXGBE_WRITE_FLUSH(&adapter->hw); |
| if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) { |
| int vector; |
| |
| for (vector = 0; vector < adapter->num_q_vectors; vector++) |
| synchronize_irq(adapter->msix_entries[vector].vector); |
| |
| synchronize_irq(adapter->msix_entries[vector++].vector); |
| } else { |
| synchronize_irq(adapter->pdev->irq); |
| } |
| } |
| |
| /** |
| * ixgbe_configure_msi_and_legacy - Initialize PIN (INTA...) and MSI interrupts |
| * |
| **/ |
| static void ixgbe_configure_msi_and_legacy(struct ixgbe_adapter *adapter) |
| { |
| struct ixgbe_q_vector *q_vector = adapter->q_vector[0]; |
| |
| ixgbe_write_eitr(q_vector); |
| |
| ixgbe_set_ivar(adapter, 0, 0, 0); |
| ixgbe_set_ivar(adapter, 1, 0, 0); |
| |
| e_info(hw, "Legacy interrupt IVAR setup done\n"); |
| } |
| |
| /** |
| * ixgbe_configure_tx_ring - Configure 8259x Tx ring after Reset |
| * @adapter: board private structure |
| * @ring: structure containing ring specific data |
| * |
| * Configure the Tx descriptor ring after a reset. |
| **/ |
| void ixgbe_configure_tx_ring(struct ixgbe_adapter *adapter, |
| struct ixgbe_ring *ring) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| u64 tdba = ring->dma; |
| int wait_loop = 10; |
| u32 txdctl = IXGBE_TXDCTL_ENABLE; |
| u8 reg_idx = ring->reg_idx; |
| |
| /* disable queue to avoid issues while updating state */ |
| IXGBE_WRITE_REG(hw, IXGBE_TXDCTL(reg_idx), 0); |
| IXGBE_WRITE_FLUSH(hw); |
| |
| IXGBE_WRITE_REG(hw, IXGBE_TDBAL(reg_idx), |
| (tdba & DMA_BIT_MASK(32))); |
| IXGBE_WRITE_REG(hw, IXGBE_TDBAH(reg_idx), (tdba >> 32)); |
| IXGBE_WRITE_REG(hw, IXGBE_TDLEN(reg_idx), |
| ring->count * sizeof(union ixgbe_adv_tx_desc)); |
| IXGBE_WRITE_REG(hw, IXGBE_TDH(reg_idx), 0); |
| IXGBE_WRITE_REG(hw, IXGBE_TDT(reg_idx), 0); |
| ring->tail = adapter->io_addr + IXGBE_TDT(reg_idx); |
| |
| /* |
| * set WTHRESH to encourage burst writeback, it should not be set |
| * higher than 1 when: |
| * - ITR is 0 as it could cause false TX hangs |
| * - ITR is set to > 100k int/sec and BQL is enabled |
| * |
| * In order to avoid issues WTHRESH + PTHRESH should always be equal |
| * to or less than the number of on chip descriptors, which is |
| * currently 40. |
| */ |
| if (!ring->q_vector || (ring->q_vector->itr < IXGBE_100K_ITR)) |
| txdctl |= (1 << 16); /* WTHRESH = 1 */ |
| else |
| txdctl |= (8 << 16); /* WTHRESH = 8 */ |
| |
| /* |
| * Setting PTHRESH to 32 both improves performance |
| * and avoids a TX hang with DFP enabled |
| */ |
| txdctl |= (1 << 8) | /* HTHRESH = 1 */ |
| 32; /* PTHRESH = 32 */ |
| |
| /* reinitialize flowdirector state */ |
| if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) { |
| ring->atr_sample_rate = adapter->atr_sample_rate; |
| ring->atr_count = 0; |
| set_bit(__IXGBE_TX_FDIR_INIT_DONE, &ring->state); |
| } else { |
| ring->atr_sample_rate = 0; |
| } |
| |
| /* initialize XPS */ |
| if (!test_and_set_bit(__IXGBE_TX_XPS_INIT_DONE, &ring->state)) { |
| struct ixgbe_q_vector *q_vector = ring->q_vector; |
| |
| if (q_vector) |
| netif_set_xps_queue(ring->netdev, |
| &q_vector->affinity_mask, |
| ring->queue_index); |
| } |
| |
| clear_bit(__IXGBE_HANG_CHECK_ARMED, &ring->state); |
| |
| /* enable queue */ |
| IXGBE_WRITE_REG(hw, IXGBE_TXDCTL(reg_idx), txdctl); |
| |
| /* TXDCTL.EN will return 0 on 82598 if link is down, so skip it */ |
| if (hw->mac.type == ixgbe_mac_82598EB && |
| !(IXGBE_READ_REG(hw, IXGBE_LINKS) & IXGBE_LINKS_UP)) |
| return; |
| |
| /* poll to verify queue is enabled */ |
| do { |
| usleep_range(1000, 2000); |
| txdctl = IXGBE_READ_REG(hw, IXGBE_TXDCTL(reg_idx)); |
| } while (--wait_loop && !(txdctl & IXGBE_TXDCTL_ENABLE)); |
| if (!wait_loop) |
| e_err(drv, "Could not enable Tx Queue %d\n", reg_idx); |
| } |
| |
| static void ixgbe_setup_mtqc(struct ixgbe_adapter *adapter) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| u32 rttdcs, mtqc; |
| u8 tcs = netdev_get_num_tc(adapter->netdev); |
| |
| if (hw->mac.type == ixgbe_mac_82598EB) |
| return; |
| |
| /* disable the arbiter while setting MTQC */ |
| rttdcs = IXGBE_READ_REG(hw, IXGBE_RTTDCS); |
| rttdcs |= IXGBE_RTTDCS_ARBDIS; |
| IXGBE_WRITE_REG(hw, IXGBE_RTTDCS, rttdcs); |
| |
| /* set transmit pool layout */ |
| if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) { |
| mtqc = IXGBE_MTQC_VT_ENA; |
| if (tcs > 4) |
| mtqc |= IXGBE_MTQC_RT_ENA | IXGBE_MTQC_8TC_8TQ; |
| else if (tcs > 1) |
| mtqc |= IXGBE_MTQC_RT_ENA | IXGBE_MTQC_4TC_4TQ; |
| else if (adapter->ring_feature[RING_F_RSS].indices == 4) |
| mtqc |= IXGBE_MTQC_32VF; |
| else |
| mtqc |= IXGBE_MTQC_64VF; |
| } else { |
| if (tcs > 4) |
| mtqc = IXGBE_MTQC_RT_ENA | IXGBE_MTQC_8TC_8TQ; |
| else if (tcs > 1) |
| mtqc = IXGBE_MTQC_RT_ENA | IXGBE_MTQC_4TC_4TQ; |
| else |
| mtqc = IXGBE_MTQC_64Q_1PB; |
| } |
| |
| IXGBE_WRITE_REG(hw, IXGBE_MTQC, mtqc); |
| |
| /* Enable Security TX Buffer IFG for multiple pb */ |
| if (tcs) { |
| u32 sectx = IXGBE_READ_REG(hw, IXGBE_SECTXMINIFG); |
| sectx |= IXGBE_SECTX_DCB; |
| IXGBE_WRITE_REG(hw, IXGBE_SECTXMINIFG, sectx); |
| } |
| |
| /* re-enable the arbiter */ |
| rttdcs &= ~IXGBE_RTTDCS_ARBDIS; |
| IXGBE_WRITE_REG(hw, IXGBE_RTTDCS, rttdcs); |
| } |
| |
| /** |
| * ixgbe_configure_tx - Configure 8259x Transmit Unit after Reset |
| * @adapter: board private structure |
| * |
| * Configure the Tx unit of the MAC after a reset. |
| **/ |
| static void ixgbe_configure_tx(struct ixgbe_adapter *adapter) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| u32 dmatxctl; |
| u32 i; |
| |
| ixgbe_setup_mtqc(adapter); |
| |
| if (hw->mac.type != ixgbe_mac_82598EB) { |
| /* DMATXCTL.EN must be before Tx queues are enabled */ |
| dmatxctl = IXGBE_READ_REG(hw, IXGBE_DMATXCTL); |
| dmatxctl |= IXGBE_DMATXCTL_TE; |
| IXGBE_WRITE_REG(hw, IXGBE_DMATXCTL, dmatxctl); |
| } |
| |
| /* Setup the HW Tx Head and Tail descriptor pointers */ |
| for (i = 0; i < adapter->num_tx_queues; i++) |
| ixgbe_configure_tx_ring(adapter, adapter->tx_ring[i]); |
| } |
| |
| static void ixgbe_enable_rx_drop(struct ixgbe_adapter *adapter, |
| struct ixgbe_ring *ring) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| u8 reg_idx = ring->reg_idx; |
| u32 srrctl = IXGBE_READ_REG(hw, IXGBE_SRRCTL(reg_idx)); |
| |
| srrctl |= IXGBE_SRRCTL_DROP_EN; |
| |
| IXGBE_WRITE_REG(hw, IXGBE_SRRCTL(reg_idx), srrctl); |
| } |
| |
| static void ixgbe_disable_rx_drop(struct ixgbe_adapter *adapter, |
| struct ixgbe_ring *ring) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| u8 reg_idx = ring->reg_idx; |
| u32 srrctl = IXGBE_READ_REG(hw, IXGBE_SRRCTL(reg_idx)); |
| |
| srrctl &= ~IXGBE_SRRCTL_DROP_EN; |
| |
| IXGBE_WRITE_REG(hw, IXGBE_SRRCTL(reg_idx), srrctl); |
| } |
| |
| #ifdef CONFIG_IXGBE_DCB |
| void ixgbe_set_rx_drop_en(struct ixgbe_adapter *adapter) |
| #else |
| static void ixgbe_set_rx_drop_en(struct ixgbe_adapter *adapter) |
| #endif |
| { |
| int i; |
| bool pfc_en = adapter->dcb_cfg.pfc_mode_enable; |
| |
| if (adapter->ixgbe_ieee_pfc) |
| pfc_en |= !!(adapter->ixgbe_ieee_pfc->pfc_en); |
| |
| /* |
| * We should set the drop enable bit if: |
| * SR-IOV is enabled |
| * or |
| * Number of Rx queues > 1 and flow control is disabled |
| * |
| * This allows us to avoid head of line blocking for security |
| * and performance reasons. |
| */ |
| if (adapter->num_vfs || (adapter->num_rx_queues > 1 && |
| !(adapter->hw.fc.current_mode & ixgbe_fc_tx_pause) && !pfc_en)) { |
| for (i = 0; i < adapter->num_rx_queues; i++) |
| ixgbe_enable_rx_drop(adapter, adapter->rx_ring[i]); |
| } else { |
| for (i = 0; i < adapter->num_rx_queues; i++) |
| ixgbe_disable_rx_drop(adapter, adapter->rx_ring[i]); |
| } |
| } |
| |
| #define IXGBE_SRRCTL_BSIZEHDRSIZE_SHIFT 2 |
| |
| static void ixgbe_configure_srrctl(struct ixgbe_adapter *adapter, |
| struct ixgbe_ring *rx_ring) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| u32 srrctl; |
| u8 reg_idx = rx_ring->reg_idx; |
| |
| if (hw->mac.type == ixgbe_mac_82598EB) { |
| u16 mask = adapter->ring_feature[RING_F_RSS].mask; |
| |
| /* |
| * if VMDq is not active we must program one srrctl register |
| * per RSS queue since we have enabled RDRXCTL.MVMEN |
| */ |
| reg_idx &= mask; |
| } |
| |
| /* configure header buffer length, needed for RSC */ |
| srrctl = IXGBE_RX_HDR_SIZE << IXGBE_SRRCTL_BSIZEHDRSIZE_SHIFT; |
| |
| /* configure the packet buffer length */ |
| srrctl |= ixgbe_rx_bufsz(rx_ring) >> IXGBE_SRRCTL_BSIZEPKT_SHIFT; |
| |
| /* configure descriptor type */ |
| srrctl |= IXGBE_SRRCTL_DESCTYPE_ADV_ONEBUF; |
| |
| IXGBE_WRITE_REG(hw, IXGBE_SRRCTL(reg_idx), srrctl); |
| } |
| |
| /** |
| * ixgbe_rss_indir_tbl_entries - Return RSS indirection table entries |
| * @adapter: device handle |
| * |
| * - 82598/82599/X540: 128 |
| * - X550(non-SRIOV mode): 512 |
| * - X550(SRIOV mode): 64 |
| */ |
| u32 ixgbe_rss_indir_tbl_entries(struct ixgbe_adapter *adapter) |
| { |
| if (adapter->hw.mac.type < ixgbe_mac_X550) |
| return 128; |
| else if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) |
| return 64; |
| else |
| return 512; |
| } |
| |
| /** |
| * ixgbe_store_reta - Write the RETA table to HW |
| * @adapter: device handle |
| * |
| * Write the RSS redirection table stored in adapter.rss_indir_tbl[] to HW. |
| */ |
| void ixgbe_store_reta(struct ixgbe_adapter *adapter) |
| { |
| u32 i, reta_entries = ixgbe_rss_indir_tbl_entries(adapter); |
| struct ixgbe_hw *hw = &adapter->hw; |
| u32 reta = 0; |
| u32 indices_multi; |
| u8 *indir_tbl = adapter->rss_indir_tbl; |
| |
| /* Fill out the redirection table as follows: |
| * - 82598: 8 bit wide entries containing pair of 4 bit RSS |
| * indices. |
| * - 82599/X540: 8 bit wide entries containing 4 bit RSS index |
| * - X550: 8 bit wide entries containing 6 bit RSS index |
| */ |
| if (adapter->hw.mac.type == ixgbe_mac_82598EB) |
| indices_multi = 0x11; |
| else |
| indices_multi = 0x1; |
| |
| /* Write redirection table to HW */ |
| for (i = 0; i < reta_entries; i++) { |
| reta |= indices_multi * indir_tbl[i] << (i & 0x3) * 8; |
| if ((i & 3) == 3) { |
| if (i < 128) |
| IXGBE_WRITE_REG(hw, IXGBE_RETA(i >> 2), reta); |
| else |
| IXGBE_WRITE_REG(hw, IXGBE_ERETA((i >> 2) - 32), |
| reta); |
| reta = 0; |
| } |
| } |
| } |
| |
| /** |
| * ixgbe_store_vfreta - Write the RETA table to HW (x550 devices in SRIOV mode) |
| * @adapter: device handle |
| * |
| * Write the RSS redirection table stored in adapter.rss_indir_tbl[] to HW. |
| */ |
| static void ixgbe_store_vfreta(struct ixgbe_adapter *adapter) |
| { |
| u32 i, reta_entries = ixgbe_rss_indir_tbl_entries(adapter); |
| struct ixgbe_hw *hw = &adapter->hw; |
| u32 vfreta = 0; |
| unsigned int pf_pool = adapter->num_vfs; |
| |
| /* Write redirection table to HW */ |
| for (i = 0; i < reta_entries; i++) { |
| vfreta |= (u32)adapter->rss_indir_tbl[i] << (i & 0x3) * 8; |
| if ((i & 3) == 3) { |
| IXGBE_WRITE_REG(hw, IXGBE_PFVFRETA(i >> 2, pf_pool), |
| vfreta); |
| vfreta = 0; |
| } |
| } |
| } |
| |
| static void ixgbe_setup_reta(struct ixgbe_adapter *adapter) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| u32 i, j; |
| u32 reta_entries = ixgbe_rss_indir_tbl_entries(adapter); |
| u16 rss_i = adapter->ring_feature[RING_F_RSS].indices; |
| |
| /* Program table for at least 2 queues w/ SR-IOV so that VFs can |
| * make full use of any rings they may have. We will use the |
| * PSRTYPE register to control how many rings we use within the PF. |
| */ |
| if ((adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) && (rss_i < 2)) |
| rss_i = 2; |
| |
| /* Fill out hash function seeds */ |
| for (i = 0; i < 10; i++) |
| IXGBE_WRITE_REG(hw, IXGBE_RSSRK(i), adapter->rss_key[i]); |
| |
| /* Fill out redirection table */ |
| memset(adapter->rss_indir_tbl, 0, sizeof(adapter->rss_indir_tbl)); |
| |
| for (i = 0, j = 0; i < reta_entries; i++, j++) { |
| if (j == rss_i) |
| j = 0; |
| |
| adapter->rss_indir_tbl[i] = j; |
| } |
| |
| ixgbe_store_reta(adapter); |
| } |
| |
| static void ixgbe_setup_vfreta(struct ixgbe_adapter *adapter) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| u16 rss_i = adapter->ring_feature[RING_F_RSS].indices; |
| unsigned int pf_pool = adapter->num_vfs; |
| int i, j; |
| |
| /* Fill out hash function seeds */ |
| for (i = 0; i < 10; i++) |
| IXGBE_WRITE_REG(hw, IXGBE_PFVFRSSRK(i, pf_pool), |
| adapter->rss_key[i]); |
| |
| /* Fill out the redirection table */ |
| for (i = 0, j = 0; i < 64; i++, j++) { |
| if (j == rss_i) |
| j = 0; |
| |
| adapter->rss_indir_tbl[i] = j; |
| } |
| |
| ixgbe_store_vfreta(adapter); |
| } |
| |
| static void ixgbe_setup_mrqc(struct ixgbe_adapter *adapter) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| u32 mrqc = 0, rss_field = 0, vfmrqc = 0; |
| u32 rxcsum; |
| |
| /* Disable indicating checksum in descriptor, enables RSS hash */ |
| rxcsum = IXGBE_READ_REG(hw, IXGBE_RXCSUM); |
| rxcsum |= IXGBE_RXCSUM_PCSD; |
| IXGBE_WRITE_REG(hw, IXGBE_RXCSUM, rxcsum); |
| |
| if (adapter->hw.mac.type == ixgbe_mac_82598EB) { |
| if (adapter->ring_feature[RING_F_RSS].mask) |
| mrqc = IXGBE_MRQC_RSSEN; |
| } else { |
| u8 tcs = netdev_get_num_tc(adapter->netdev); |
| |
| if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) { |
| if (tcs > 4) |
| mrqc = IXGBE_MRQC_VMDQRT8TCEN; /* 8 TCs */ |
| else if (tcs > 1) |
| mrqc = IXGBE_MRQC_VMDQRT4TCEN; /* 4 TCs */ |
| else if (adapter->ring_feature[RING_F_RSS].indices == 4) |
| mrqc = IXGBE_MRQC_VMDQRSS32EN; |
| else |
| mrqc = IXGBE_MRQC_VMDQRSS64EN; |
| } else { |
| if (tcs > 4) |
| mrqc = IXGBE_MRQC_RTRSS8TCEN; |
| else if (tcs > 1) |
| mrqc = IXGBE_MRQC_RTRSS4TCEN; |
| else |
| mrqc = IXGBE_MRQC_RSSEN; |
| } |
| } |
| |
| /* Perform hash on these packet types */ |
| rss_field |= IXGBE_MRQC_RSS_FIELD_IPV4 | |
| IXGBE_MRQC_RSS_FIELD_IPV4_TCP | |
| IXGBE_MRQC_RSS_FIELD_IPV6 | |
| IXGBE_MRQC_RSS_FIELD_IPV6_TCP; |
| |
| if (adapter->flags2 & IXGBE_FLAG2_RSS_FIELD_IPV4_UDP) |
| rss_field |= IXGBE_MRQC_RSS_FIELD_IPV4_UDP; |
| if (adapter->flags2 & IXGBE_FLAG2_RSS_FIELD_IPV6_UDP) |
| rss_field |= IXGBE_MRQC_RSS_FIELD_IPV6_UDP; |
| |
| netdev_rss_key_fill(adapter->rss_key, sizeof(adapter->rss_key)); |
| if ((hw->mac.type >= ixgbe_mac_X550) && |
| (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED)) { |
| unsigned int pf_pool = adapter->num_vfs; |
| |
| /* Enable VF RSS mode */ |
| mrqc |= IXGBE_MRQC_MULTIPLE_RSS; |
| IXGBE_WRITE_REG(hw, IXGBE_MRQC, mrqc); |
| |
| /* Setup RSS through the VF registers */ |
| ixgbe_setup_vfreta(adapter); |
| vfmrqc = IXGBE_MRQC_RSSEN; |
| vfmrqc |= rss_field; |
| IXGBE_WRITE_REG(hw, IXGBE_PFVFMRQC(pf_pool), vfmrqc); |
| } else { |
| ixgbe_setup_reta(adapter); |
| mrqc |= rss_field; |
| IXGBE_WRITE_REG(hw, IXGBE_MRQC, mrqc); |
| } |
| } |
| |
| /** |
| * ixgbe_configure_rscctl - enable RSC for the indicated ring |
| * @adapter: address of board private structure |
| * @index: index of ring to set |
| **/ |
| static void ixgbe_configure_rscctl(struct ixgbe_adapter *adapter, |
| struct ixgbe_ring *ring) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| u32 rscctrl; |
| u8 reg_idx = ring->reg_idx; |
| |
| if (!ring_is_rsc_enabled(ring)) |
| return; |
| |
| rscctrl = IXGBE_READ_REG(hw, IXGBE_RSCCTL(reg_idx)); |
| rscctrl |= IXGBE_RSCCTL_RSCEN; |
| /* |
| * we must limit the number of descriptors so that the |
| * total size of max desc * buf_len is not greater |
| * than 65536 |
| */ |
| rscctrl |= IXGBE_RSCCTL_MAXDESC_16; |
| IXGBE_WRITE_REG(hw, IXGBE_RSCCTL(reg_idx), rscctrl); |
| } |
| |
| #define IXGBE_MAX_RX_DESC_POLL 10 |
| static void ixgbe_rx_desc_queue_enable(struct ixgbe_adapter *adapter, |
| struct ixgbe_ring *ring) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| int wait_loop = IXGBE_MAX_RX_DESC_POLL; |
| u32 rxdctl; |
| u8 reg_idx = ring->reg_idx; |
| |
| if (ixgbe_removed(hw->hw_addr)) |
| return; |
| /* RXDCTL.EN will return 0 on 82598 if link is down, so skip it */ |
| if (hw->mac.type == ixgbe_mac_82598EB && |
| !(IXGBE_READ_REG(hw, IXGBE_LINKS) & IXGBE_LINKS_UP)) |
| return; |
| |
| do { |
| usleep_range(1000, 2000); |
| rxdctl = IXGBE_READ_REG(hw, IXGBE_RXDCTL(reg_idx)); |
| } while (--wait_loop && !(rxdctl & IXGBE_RXDCTL_ENABLE)); |
| |
| if (!wait_loop) { |
| e_err(drv, "RXDCTL.ENABLE on Rx queue %d not set within " |
| "the polling period\n", reg_idx); |
| } |
| } |
| |
| void ixgbe_disable_rx_queue(struct ixgbe_adapter *adapter, |
| struct ixgbe_ring *ring) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| int wait_loop = IXGBE_MAX_RX_DESC_POLL; |
| u32 rxdctl; |
| u8 reg_idx = ring->reg_idx; |
| |
| if (ixgbe_removed(hw->hw_addr)) |
| return; |
| rxdctl = IXGBE_READ_REG(hw, IXGBE_RXDCTL(reg_idx)); |
| rxdctl &= ~IXGBE_RXDCTL_ENABLE; |
| |
| /* write value back with RXDCTL.ENABLE bit cleared */ |
| IXGBE_WRITE_REG(hw, IXGBE_RXDCTL(reg_idx), rxdctl); |
| |
| if (hw->mac.type == ixgbe_mac_82598EB && |
| !(IXGBE_READ_REG(hw, IXGBE_LINKS) & IXGBE_LINKS_UP)) |
| return; |
| |
| /* the hardware may take up to 100us to really disable the rx queue */ |
| do { |
| udelay(10); |
| rxdctl = IXGBE_READ_REG(hw, IXGBE_RXDCTL(reg_idx)); |
| } while (--wait_loop && (rxdctl & IXGBE_RXDCTL_ENABLE)); |
| |
| if (!wait_loop) { |
| e_err(drv, "RXDCTL.ENABLE on Rx queue %d not cleared within " |
| "the polling period\n", reg_idx); |
| } |
| } |
| |
| void ixgbe_configure_rx_ring(struct ixgbe_adapter *adapter, |
| struct ixgbe_ring *ring) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| u64 rdba = ring->dma; |
| u32 rxdctl; |
| u8 reg_idx = ring->reg_idx; |
| |
| /* disable queue to avoid issues while updating state */ |
| rxdctl = IXGBE_READ_REG(hw, IXGBE_RXDCTL(reg_idx)); |
| ixgbe_disable_rx_queue(adapter, ring); |
| |
| IXGBE_WRITE_REG(hw, IXGBE_RDBAL(reg_idx), (rdba & DMA_BIT_MASK(32))); |
| IXGBE_WRITE_REG(hw, IXGBE_RDBAH(reg_idx), (rdba >> 32)); |
| IXGBE_WRITE_REG(hw, IXGBE_RDLEN(reg_idx), |
| ring->count * sizeof(union ixgbe_adv_rx_desc)); |
| /* Force flushing of IXGBE_RDLEN to prevent MDD */ |
| IXGBE_WRITE_FLUSH(hw); |
| |
| IXGBE_WRITE_REG(hw, IXGBE_RDH(reg_idx), 0); |
| IXGBE_WRITE_REG(hw, IXGBE_RDT(reg_idx), 0); |
| ring->tail = adapter->io_addr + IXGBE_RDT(reg_idx); |
| |
| ixgbe_configure_srrctl(adapter, ring); |
| ixgbe_configure_rscctl(adapter, ring); |
| |
| if (hw->mac.type == ixgbe_mac_82598EB) { |
| /* |
| * enable cache line friendly hardware writes: |
| * PTHRESH=32 descriptors (half the internal cache), |
| * this also removes ugly rx_no_buffer_count increment |
| * HTHRESH=4 descriptors (to minimize latency on fetch) |
| * WTHRESH=8 burst writeback up to two cache lines |
| */ |
| rxdctl &= ~0x3FFFFF; |
| rxdctl |= 0x080420; |
| } |
| |
| /* enable receive descriptor ring */ |
| rxdctl |= IXGBE_RXDCTL_ENABLE; |
| IXGBE_WRITE_REG(hw, IXGBE_RXDCTL(reg_idx), rxdctl); |
| |
| ixgbe_rx_desc_queue_enable(adapter, ring); |
| ixgbe_alloc_rx_buffers(ring, ixgbe_desc_unused(ring)); |
| } |
| |
| static void ixgbe_setup_psrtype(struct ixgbe_adapter *adapter) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| int rss_i = adapter->ring_feature[RING_F_RSS].indices; |
| u16 pool; |
| |
| /* PSRTYPE must be initialized in non 82598 adapters */ |
| u32 psrtype = IXGBE_PSRTYPE_TCPHDR | |
| IXGBE_PSRTYPE_UDPHDR | |
| IXGBE_PSRTYPE_IPV4HDR | |
| IXGBE_PSRTYPE_L2HDR | |
| IXGBE_PSRTYPE_IPV6HDR; |
| |
| if (hw->mac.type == ixgbe_mac_82598EB) |
| return; |
| |
| if (rss_i > 3) |
| psrtype |= 2 << 29; |
| else if (rss_i > 1) |
| psrtype |= 1 << 29; |
| |
| for_each_set_bit(pool, &adapter->fwd_bitmask, 32) |
| IXGBE_WRITE_REG(hw, IXGBE_PSRTYPE(VMDQ_P(pool)), psrtype); |
| } |
| |
| static void ixgbe_configure_virtualization(struct ixgbe_adapter *adapter) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| u32 reg_offset, vf_shift; |
| u32 gcr_ext, vmdctl; |
| int i; |
| |
| if (!(adapter->flags & IXGBE_FLAG_SRIOV_ENABLED)) |
| return; |
| |
| vmdctl = IXGBE_READ_REG(hw, IXGBE_VT_CTL); |
| vmdctl |= IXGBE_VMD_CTL_VMDQ_EN; |
| vmdctl &= ~IXGBE_VT_CTL_POOL_MASK; |
| vmdctl |= VMDQ_P(0) << IXGBE_VT_CTL_POOL_SHIFT; |
| vmdctl |= IXGBE_VT_CTL_REPLEN; |
| IXGBE_WRITE_REG(hw, IXGBE_VT_CTL, vmdctl); |
| |
| vf_shift = VMDQ_P(0) % 32; |
| reg_offset = (VMDQ_P(0) >= 32) ? 1 : 0; |
| |
| /* Enable only the PF's pool for Tx/Rx */ |
| IXGBE_WRITE_REG(hw, IXGBE_VFRE(reg_offset), (~0) << vf_shift); |
| IXGBE_WRITE_REG(hw, IXGBE_VFRE(reg_offset ^ 1), reg_offset - 1); |
| IXGBE_WRITE_REG(hw, IXGBE_VFTE(reg_offset), (~0) << vf_shift); |
| IXGBE_WRITE_REG(hw, IXGBE_VFTE(reg_offset ^ 1), reg_offset - 1); |
| if (adapter->bridge_mode == BRIDGE_MODE_VEB) |
| IXGBE_WRITE_REG(hw, IXGBE_PFDTXGSWC, IXGBE_PFDTXGSWC_VT_LBEN); |
| |
| /* Map PF MAC address in RAR Entry 0 to first pool following VFs */ |
| hw->mac.ops.set_vmdq(hw, 0, VMDQ_P(0)); |
| |
| /* clear VLAN promisc flag so VFTA will be updated if necessary */ |
| adapter->flags2 &= ~IXGBE_FLAG2_VLAN_PROMISC; |
| |
| /* |
| * Set up VF register offsets for selected VT Mode, |
| * i.e. 32 or 64 VFs for SR-IOV |
| */ |
| switch (adapter->ring_feature[RING_F_VMDQ].mask) { |
| case IXGBE_82599_VMDQ_8Q_MASK: |
| gcr_ext = IXGBE_GCR_EXT_VT_MODE_16; |
| break; |
| case IXGBE_82599_VMDQ_4Q_MASK: |
| gcr_ext = IXGBE_GCR_EXT_VT_MODE_32; |
| break; |
| default: |
| gcr_ext = IXGBE_GCR_EXT_VT_MODE_64; |
| break; |
| } |
| |
| IXGBE_WRITE_REG(hw, IXGBE_GCR_EXT, gcr_ext); |
| |
| |
| /* Enable MAC Anti-Spoofing */ |
| hw->mac.ops.set_mac_anti_spoofing(hw, (adapter->num_vfs != 0), |
| adapter->num_vfs); |
| |
| /* Ensure LLDP and FC is set for Ethertype Antispoofing if we will be |
| * calling set_ethertype_anti_spoofing for each VF in loop below |
| */ |
| if (hw->mac.ops.set_ethertype_anti_spoofing) { |
| IXGBE_WRITE_REG(hw, IXGBE_ETQF(IXGBE_ETQF_FILTER_LLDP), |
| (IXGBE_ETQF_FILTER_EN | |
| IXGBE_ETQF_TX_ANTISPOOF | |
| IXGBE_ETH_P_LLDP)); |
| |
| IXGBE_WRITE_REG(hw, IXGBE_ETQF(IXGBE_ETQF_FILTER_FC), |
| (IXGBE_ETQF_FILTER_EN | |
| IXGBE_ETQF_TX_ANTISPOOF | |
| ETH_P_PAUSE)); |
| } |
| |
| /* For VFs that have spoof checking turned off */ |
| for (i = 0; i < adapter->num_vfs; i++) { |
| if (!adapter->vfinfo[i].spoofchk_enabled) |
| ixgbe_ndo_set_vf_spoofchk(adapter->netdev, i, false); |
| |
| /* enable ethertype anti spoofing if hw supports it */ |
| if (hw->mac.ops.set_ethertype_anti_spoofing) |
| hw->mac.ops.set_ethertype_anti_spoofing(hw, true, i); |
| |
| /* Enable/Disable RSS query feature */ |
| ixgbe_ndo_set_vf_rss_query_en(adapter->netdev, i, |
| adapter->vfinfo[i].rss_query_enabled); |
| } |
| } |
| |
| static void ixgbe_set_rx_buffer_len(struct ixgbe_adapter *adapter) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| struct net_device *netdev = adapter->netdev; |
| int max_frame = netdev->mtu + ETH_HLEN + ETH_FCS_LEN; |
| struct ixgbe_ring *rx_ring; |
| int i; |
| u32 mhadd, hlreg0; |
| |
| #ifdef IXGBE_FCOE |
| /* adjust max frame to be able to do baby jumbo for FCoE */ |
| if ((adapter->flags & IXGBE_FLAG_FCOE_ENABLED) && |
| (max_frame < IXGBE_FCOE_JUMBO_FRAME_SIZE)) |
| max_frame = IXGBE_FCOE_JUMBO_FRAME_SIZE; |
| |
| #endif /* IXGBE_FCOE */ |
| |
| /* adjust max frame to be at least the size of a standard frame */ |
| if (max_frame < (ETH_FRAME_LEN + ETH_FCS_LEN)) |
| max_frame = (ETH_FRAME_LEN + ETH_FCS_LEN); |
| |
| mhadd = IXGBE_READ_REG(hw, IXGBE_MHADD); |
| if (max_frame != (mhadd >> IXGBE_MHADD_MFS_SHIFT)) { |
| mhadd &= ~IXGBE_MHADD_MFS_MASK; |
| mhadd |= max_frame << IXGBE_MHADD_MFS_SHIFT; |
| |
| IXGBE_WRITE_REG(hw, IXGBE_MHADD, mhadd); |
| } |
| |
| hlreg0 = IXGBE_READ_REG(hw, IXGBE_HLREG0); |
| /* set jumbo enable since MHADD.MFS is keeping size locked at max_frame */ |
| hlreg0 |= IXGBE_HLREG0_JUMBOEN; |
| IXGBE_WRITE_REG(hw, IXGBE_HLREG0, hlreg0); |
| |
| /* |
| * Setup the HW Rx Head and Tail Descriptor Pointers and |
| * the Base and Length of the Rx Descriptor Ring |
| */ |
| for (i = 0; i < adapter->num_rx_queues; i++) { |
| rx_ring = adapter->rx_ring[i]; |
| if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) |
| set_ring_rsc_enabled(rx_ring); |
| else |
| clear_ring_rsc_enabled(rx_ring); |
| } |
| } |
| |
| static void ixgbe_setup_rdrxctl(struct ixgbe_adapter *adapter) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| u32 rdrxctl = IXGBE_READ_REG(hw, IXGBE_RDRXCTL); |
| |
| switch (hw->mac.type) { |
| case ixgbe_mac_82598EB: |
| /* |
| * For VMDq support of different descriptor types or |
| * buffer sizes through the use of multiple SRRCTL |
| * registers, RDRXCTL.MVMEN must be set to 1 |
| * |
| * also, the manual doesn't mention it clearly but DCA hints |
| * will only use queue 0's tags unless this bit is set. Side |
| * effects of setting this bit are only that SRRCTL must be |
| * fully programmed [0..15] |
| */ |
| rdrxctl |= IXGBE_RDRXCTL_MVMEN; |
| break; |
| case ixgbe_mac_X550: |
| case ixgbe_mac_X550EM_x: |
| if (adapter->num_vfs) |
| rdrxctl |= IXGBE_RDRXCTL_PSP; |
| /* fall through for older HW */ |
| case ixgbe_mac_82599EB: |
| case ixgbe_mac_X540: |
| /* Disable RSC for ACK packets */ |
| IXGBE_WRITE_REG(hw, IXGBE_RSCDBU, |
| (IXGBE_RSCDBU_RSCACKDIS | IXGBE_READ_REG(hw, IXGBE_RSCDBU))); |
| rdrxctl &= ~IXGBE_RDRXCTL_RSCFRSTSIZE; |
| /* hardware requires some bits to be set by default */ |
| rdrxctl |= (IXGBE_RDRXCTL_RSCACKC | IXGBE_RDRXCTL_FCOE_WRFIX); |
| rdrxctl |= IXGBE_RDRXCTL_CRCSTRIP; |
| break; |
| default: |
| /* We should do nothing since we don't know this hardware */ |
| return; |
| } |
| |
| IXGBE_WRITE_REG(hw, IXGBE_RDRXCTL, rdrxctl); |
| } |
| |
| /** |
| * ixgbe_configure_rx - Configure 8259x Receive Unit after Reset |
| * @adapter: board private structure |
| * |
| * Configure the Rx unit of the MAC after a reset. |
| **/ |
| static void ixgbe_configure_rx(struct ixgbe_adapter *adapter) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| int i; |
| u32 rxctrl, rfctl; |
| |
| /* disable receives while setting up the descriptors */ |
| hw->mac.ops.disable_rx(hw); |
| |
| ixgbe_setup_psrtype(adapter); |
| ixgbe_setup_rdrxctl(adapter); |
| |
| /* RSC Setup */ |
| rfctl = IXGBE_READ_REG(hw, IXGBE_RFCTL); |
| rfctl &= ~IXGBE_RFCTL_RSC_DIS; |
| if (!(adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED)) |
| rfctl |= IXGBE_RFCTL_RSC_DIS; |
| IXGBE_WRITE_REG(hw, IXGBE_RFCTL, rfctl); |
| |
| /* Program registers for the distribution of queues */ |
| ixgbe_setup_mrqc(adapter); |
| |
| /* set_rx_buffer_len must be called before ring initialization */ |
| ixgbe_set_rx_buffer_len(adapter); |
| |
| /* |
| * Setup the HW Rx Head and Tail Descriptor Pointers and |
| * the Base and Length of the Rx Descriptor Ring |
| */ |
| for (i = 0; i < adapter->num_rx_queues; i++) |
| ixgbe_configure_rx_ring(adapter, adapter->rx_ring[i]); |
| |
| rxctrl = IXGBE_READ_REG(hw, IXGBE_RXCTRL); |
| /* disable drop enable for 82598 parts */ |
| if (hw->mac.type == ixgbe_mac_82598EB) |
| rxctrl |= IXGBE_RXCTRL_DMBYPS; |
| |
| /* enable all receives */ |
| rxctrl |= IXGBE_RXCTRL_RXEN; |
| hw->mac.ops.enable_rx_dma(hw, rxctrl); |
| } |
| |
| static int ixgbe_vlan_rx_add_vid(struct net_device *netdev, |
| __be16 proto, u16 vid) |
| { |
| struct ixgbe_adapter *adapter = netdev_priv(netdev); |
| struct ixgbe_hw *hw = &adapter->hw; |
| |
| /* add VID to filter table */ |
| hw->mac.ops.set_vfta(&adapter->hw, vid, VMDQ_P(0), true, true); |
| set_bit(vid, adapter->active_vlans); |
| |
| return 0; |
| } |
| |
| static int ixgbe_find_vlvf_entry(struct ixgbe_hw *hw, u32 vlan) |
| { |
| u32 vlvf; |
| int idx; |
| |
| /* short cut the special case */ |
| if (vlan == 0) |
| return 0; |
| |
| /* Search for the vlan id in the VLVF entries */ |
| for (idx = IXGBE_VLVF_ENTRIES; --idx;) { |
| vlvf = IXGBE_READ_REG(hw, IXGBE_VLVF(idx)); |
| if ((vlvf & VLAN_VID_MASK) == vlan) |
| break; |
| } |
| |
| return idx; |
| } |
| |
| void ixgbe_update_pf_promisc_vlvf(struct ixgbe_adapter *adapter, u32 vid) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| u32 bits, word; |
| int idx; |
| |
| idx = ixgbe_find_vlvf_entry(hw, vid); |
| if (!idx) |
| return; |
| |
| /* See if any other pools are set for this VLAN filter |
| * entry other than the PF. |
| */ |
| word = idx * 2 + (VMDQ_P(0) / 32); |
| bits = ~(1 << (VMDQ_P(0)) % 32); |
| bits &= IXGBE_READ_REG(hw, IXGBE_VLVFB(word)); |
| |
| /* Disable the filter so this falls into the default pool. */ |
| if (!bits && !IXGBE_READ_REG(hw, IXGBE_VLVFB(word ^ 1))) { |
| if (!(adapter->flags2 & IXGBE_FLAG2_VLAN_PROMISC)) |
| IXGBE_WRITE_REG(hw, IXGBE_VLVFB(word), 0); |
| IXGBE_WRITE_REG(hw, IXGBE_VLVF(idx), 0); |
| } |
| } |
| |
| static int ixgbe_vlan_rx_kill_vid(struct net_device *netdev, |
| __be16 proto, u16 vid) |
| { |
| struct ixgbe_adapter *adapter = netdev_priv(netdev); |
| struct ixgbe_hw *hw = &adapter->hw; |
| |
| /* remove VID from filter table */ |
| if (adapter->flags2 & IXGBE_FLAG2_VLAN_PROMISC) |
| ixgbe_update_pf_promisc_vlvf(adapter, vid); |
| else |
| hw->mac.ops.set_vfta(hw, vid, VMDQ_P(0), false, true); |
| |
| clear_bit(vid, adapter->active_vlans); |
| |
| return 0; |
| } |
| |
| /** |
| * ixgbe_vlan_strip_disable - helper to disable hw vlan stripping |
| * @adapter: driver data |
| */ |
| static void ixgbe_vlan_strip_disable(struct ixgbe_adapter *adapter) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| u32 vlnctrl; |
| int i, j; |
| |
| switch (hw->mac.type) { |
| case ixgbe_mac_82598EB: |
| vlnctrl = IXGBE_READ_REG(hw, IXGBE_VLNCTRL); |
| vlnctrl &= ~IXGBE_VLNCTRL_VME; |
| IXGBE_WRITE_REG(hw, IXGBE_VLNCTRL, vlnctrl); |
| break; |
| case ixgbe_mac_82599EB: |
| case ixgbe_mac_X540: |
| case ixgbe_mac_X550: |
| case ixgbe_mac_X550EM_x: |
| for (i = 0; i < adapter->num_rx_queues; i++) { |
| struct ixgbe_ring *ring = adapter->rx_ring[i]; |
| |
| if (ring->l2_accel_priv) |
| continue; |
| j = ring->reg_idx; |
| vlnctrl = IXGBE_READ_REG(hw, IXGBE_RXDCTL(j)); |
| vlnctrl &= ~IXGBE_RXDCTL_VME; |
| IXGBE_WRITE_REG(hw, IXGBE_RXDCTL(j), vlnctrl); |
| } |
| break; |
| default: |
| break; |
| } |
| } |
| |
| /** |
| * ixgbe_vlan_strip_enable - helper to enable hw vlan stripping |
| * @adapter: driver data |
| */ |
| static void ixgbe_vlan_strip_enable(struct ixgbe_adapter *adapter) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| u32 vlnctrl; |
| int i, j; |
| |
| switch (hw->mac.type) { |
| case ixgbe_mac_82598EB: |
| vlnctrl = IXGBE_READ_REG(hw, IXGBE_VLNCTRL); |
| vlnctrl |= IXGBE_VLNCTRL_VME; |
| IXGBE_WRITE_REG(hw, IXGBE_VLNCTRL, vlnctrl); |
| break; |
| case ixgbe_mac_82599EB: |
| case ixgbe_mac_X540: |
| case ixgbe_mac_X550: |
| case ixgbe_mac_X550EM_x: |
| for (i = 0; i < adapter->num_rx_queues; i++) { |
| struct ixgbe_ring *ring = adapter->rx_ring[i]; |
| |
| if (ring->l2_accel_priv) |
| continue; |
| j = ring->reg_idx; |
| vlnctrl = IXGBE_READ_REG(hw, IXGBE_RXDCTL(j)); |
| vlnctrl |= IXGBE_RXDCTL_VME; |
| IXGBE_WRITE_REG(hw, IXGBE_RXDCTL(j), vlnctrl); |
| } |
| break; |
| default: |
| break; |
| } |
| } |
| |
| static void ixgbe_vlan_promisc_enable(struct ixgbe_adapter *adapter) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| u32 vlnctrl, i; |
| |
| switch (hw->mac.type) { |
| case ixgbe_mac_82599EB: |
| case ixgbe_mac_X540: |
| case ixgbe_mac_X550: |
| case ixgbe_mac_X550EM_x: |
| default: |
| if (adapter->flags & IXGBE_FLAG_VMDQ_ENABLED) |
| break; |
| /* fall through */ |
| case ixgbe_mac_82598EB: |
| /* legacy case, we can just disable VLAN filtering */ |
| vlnctrl = IXGBE_READ_REG(hw, IXGBE_VLNCTRL); |
| vlnctrl &= ~(IXGBE_VLNCTRL_VFE | IXGBE_VLNCTRL_CFIEN); |
| IXGBE_WRITE_REG(hw, IXGBE_VLNCTRL, vlnctrl); |
| return; |
| } |
| |
| /* We are already in VLAN promisc, nothing to do */ |
| if (adapter->flags2 & IXGBE_FLAG2_VLAN_PROMISC) |
| return; |
| |
| /* Set flag so we don't redo unnecessary work */ |
| adapter->flags2 |= IXGBE_FLAG2_VLAN_PROMISC; |
| |
| /* Add PF to all active pools */ |
| for (i = IXGBE_VLVF_ENTRIES; --i;) { |
| u32 reg_offset = IXGBE_VLVFB(i * 2 + VMDQ_P(0) / 32); |
| u32 vlvfb = IXGBE_READ_REG(hw, reg_offset); |
| |
| vlvfb |= 1 << (VMDQ_P(0) % 32); |
| IXGBE_WRITE_REG(hw, reg_offset, vlvfb); |
| } |
| |
| /* Set all bits in the VLAN filter table array */ |
| for (i = hw->mac.vft_size; i--;) |
| IXGBE_WRITE_REG(hw, IXGBE_VFTA(i), ~0U); |
| } |
| |
| #define VFTA_BLOCK_SIZE 8 |
| static void ixgbe_scrub_vfta(struct ixgbe_adapter *adapter, u32 vfta_offset) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| u32 vfta[VFTA_BLOCK_SIZE] = { 0 }; |
| u32 vid_start = vfta_offset * 32; |
| u32 vid_end = vid_start + (VFTA_BLOCK_SIZE * 32); |
| u32 i, vid, word, bits; |
| |
| for (i = IXGBE_VLVF_ENTRIES; --i;) { |
| u32 vlvf = IXGBE_READ_REG(hw, IXGBE_VLVF(i)); |
| |
| /* pull VLAN ID from VLVF */ |
| vid = vlvf & VLAN_VID_MASK; |
| |
| /* only concern outselves with a certain range */ |
| if (vid < vid_start || vid >= vid_end) |
| continue; |
| |
| if (vlvf) { |
| /* record VLAN ID in VFTA */ |
| vfta[(vid - vid_start) / 32] |= 1 << (vid % 32); |
| |
| /* if PF is part of this then continue */ |
| if (test_bit(vid, adapter->active_vlans)) |
| continue; |
| } |
| |
| /* remove PF from the pool */ |
| word = i * 2 + VMDQ_P(0) / 32; |
| bits = ~(1 << (VMDQ_P(0) % 32)); |
| bits &= IXGBE_READ_REG(hw, IXGBE_VLVFB(word)); |
| IXGBE_WRITE_REG(hw, IXGBE_VLVFB(word), bits); |
| } |
| |
| /* extract values from active_vlans and write back to VFTA */ |
| for (i = VFTA_BLOCK_SIZE; i--;) { |
| vid = (vfta_offset + i) * 32; |
| word = vid / BITS_PER_LONG; |
| bits = vid % BITS_PER_LONG; |
| |
| vfta[i] |= adapter->active_vlans[word] >> bits; |
| |
| IXGBE_WRITE_REG(hw, IXGBE_VFTA(vfta_offset + i), vfta[i]); |
| } |
| } |
| |
| static void ixgbe_vlan_promisc_disable(struct ixgbe_adapter *adapter) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| u32 vlnctrl, i; |
| |
| switch (hw->mac.type) { |
| case ixgbe_mac_82599EB: |
| case ixgbe_mac_X540: |
| case ixgbe_mac_X550: |
| case ixgbe_mac_X550EM_x: |
| default: |
| if (adapter->flags & IXGBE_FLAG_VMDQ_ENABLED) |
| break; |
| /* fall through */ |
| case ixgbe_mac_82598EB: |
| vlnctrl = IXGBE_READ_REG(hw, IXGBE_VLNCTRL); |
| vlnctrl &= ~IXGBE_VLNCTRL_CFIEN; |
| vlnctrl |= IXGBE_VLNCTRL_VFE; |
| IXGBE_WRITE_REG(hw, IXGBE_VLNCTRL, vlnctrl); |
| return; |
| } |
| |
| /* We are not in VLAN promisc, nothing to do */ |
| if (!(adapter->flags2 & IXGBE_FLAG2_VLAN_PROMISC)) |
| return; |
| |
| /* Set flag so we don't redo unnecessary work */ |
| adapter->flags2 &= ~IXGBE_FLAG2_VLAN_PROMISC; |
| |
| for (i = 0; i < hw->mac.vft_size; i += VFTA_BLOCK_SIZE) |
| ixgbe_scrub_vfta(adapter, i); |
| } |
| |
| static void ixgbe_restore_vlan(struct ixgbe_adapter *adapter) |
| { |
| u16 vid; |
| |
| ixgbe_vlan_rx_add_vid(adapter->netdev, htons(ETH_P_8021Q), 0); |
| |
| for_each_set_bit(vid, adapter->active_vlans, VLAN_N_VID) |
| ixgbe_vlan_rx_add_vid(adapter->netdev, htons(ETH_P_8021Q), vid); |
| } |
| |
| /** |
| * ixgbe_write_mc_addr_list - write multicast addresses to MTA |
| * @netdev: network interface device structure |
| * |
| * Writes multicast address list to the MTA hash table. |
| * Returns: -ENOMEM on failure |
| * 0 on no addresses written |
| * X on writing X addresses to MTA |
| **/ |
| static int ixgbe_write_mc_addr_list(struct net_device *netdev) |
| { |
| struct ixgbe_adapter *adapter = netdev_priv(netdev); |
| struct ixgbe_hw *hw = &adapter->hw; |
| |
| if (!netif_running(netdev)) |
| return 0; |
| |
| if (hw->mac.ops.update_mc_addr_list) |
| hw->mac.ops.update_mc_addr_list(hw, netdev); |
| else |
| return -ENOMEM; |
| |
| #ifdef CONFIG_PCI_IOV |
| ixgbe_restore_vf_multicasts(adapter); |
| #endif |
| |
| return netdev_mc_count(netdev); |
| } |
| |
| #ifdef CONFIG_PCI_IOV |
| void ixgbe_full_sync_mac_table(struct ixgbe_adapter *adapter) |
| { |
| struct ixgbe_mac_addr *mac_table = &adapter->mac_table[0]; |
| struct ixgbe_hw *hw = &adapter->hw; |
| int i; |
| |
| for (i = 0; i < hw->mac.num_rar_entries; i++, mac_table++) { |
| mac_table->state &= ~IXGBE_MAC_STATE_MODIFIED; |
| |
| if (mac_table->state & IXGBE_MAC_STATE_IN_USE) |
| hw->mac.ops.set_rar(hw, i, |
| mac_table->addr, |
| mac_table->pool, |
| IXGBE_RAH_AV); |
| else |
| hw->mac.ops.clear_rar(hw, i); |
| } |
| } |
| |
| #endif |
| static void ixgbe_sync_mac_table(struct ixgbe_adapter *adapter) |
| { |
| struct ixgbe_mac_addr *mac_table = &adapter->mac_table[0]; |
| struct ixgbe_hw *hw = &adapter->hw; |
| int i; |
| |
| for (i = 0; i < hw->mac.num_rar_entries; i++, mac_table++) { |
| if (!(mac_table->state & IXGBE_MAC_STATE_MODIFIED)) |
| continue; |
| |
| mac_table->state &= ~IXGBE_MAC_STATE_MODIFIED; |
| |
| if (mac_table->state & IXGBE_MAC_STATE_IN_USE) |
| hw->mac.ops.set_rar(hw, i, |
| mac_table->addr, |
| mac_table->pool, |
| IXGBE_RAH_AV); |
| else |
| hw->mac.ops.clear_rar(hw, i); |
| } |
| } |
| |
| static void ixgbe_flush_sw_mac_table(struct ixgbe_adapter *adapter) |
| { |
| struct ixgbe_mac_addr *mac_table = &adapter->mac_table[0]; |
| struct ixgbe_hw *hw = &adapter->hw; |
| int i; |
| |
| for (i = 0; i < hw->mac.num_rar_entries; i++, mac_table++) { |
| mac_table->state |= IXGBE_MAC_STATE_MODIFIED; |
| mac_table->state &= ~IXGBE_MAC_STATE_IN_USE; |
| } |
| |
| ixgbe_sync_mac_table(adapter); |
| } |
| |
| static int ixgbe_available_rars(struct ixgbe_adapter *adapter, u16 pool) |
| { |
| struct ixgbe_mac_addr *mac_table = &adapter->mac_table[0]; |
| struct ixgbe_hw *hw = &adapter->hw; |
| int i, count = 0; |
| |
| for (i = 0; i < hw->mac.num_rar_entries; i++, mac_table++) { |
| /* do not count default RAR as available */ |
| if (mac_table->state & IXGBE_MAC_STATE_DEFAULT) |
| continue; |
| |
| /* only count unused and addresses that belong to us */ |
| if (mac_table->state & IXGBE_MAC_STATE_IN_USE) { |
| if (mac_table->pool != pool) |
| continue; |
| } |
| |
| count++; |
| } |
| |
| return count; |
| } |
| |
| /* this function destroys the first RAR entry */ |
| static void ixgbe_mac_set_default_filter(struct ixgbe_adapter *adapter) |
| { |
| struct ixgbe_mac_addr *mac_table = &adapter->mac_table[0]; |
| struct ixgbe_hw *hw = &adapter->hw; |
| |
| memcpy(&mac_table->addr, hw->mac.addr, ETH_ALEN); |
| mac_table->pool = VMDQ_P(0); |
| |
| mac_table->state = IXGBE_MAC_STATE_DEFAULT | IXGBE_MAC_STATE_IN_USE; |
| |
| hw->mac.ops.set_rar(hw, 0, mac_table->addr, mac_table->pool, |
| IXGBE_RAH_AV); |
| } |
| |
| int ixgbe_add_mac_filter(struct ixgbe_adapter *adapter, |
| const u8 *addr, u16 pool) |
| { |
| struct ixgbe_mac_addr *mac_table = &adapter->mac_table[0]; |
| struct ixgbe_hw *hw = &adapter->hw; |
| int i; |
| |
| if (is_zero_ether_addr(addr)) |
| return -EINVAL; |
| |
| for (i = 0; i < hw->mac.num_rar_entries; i++, mac_table++) { |
| if (mac_table->state & IXGBE_MAC_STATE_IN_USE) |
| continue; |
| |
| ether_addr_copy(mac_table->addr, addr); |
| mac_table->pool = pool; |
| |
| mac_table->state |= IXGBE_MAC_STATE_MODIFIED | |
| IXGBE_MAC_STATE_IN_USE; |
| |
| ixgbe_sync_mac_table(adapter); |
| |
| return i; |
| } |
| |
| return -ENOMEM; |
| } |
| |
| int ixgbe_del_mac_filter(struct ixgbe_adapter *adapter, |
| const u8 *addr, u16 pool) |
| { |
| struct ixgbe_mac_addr *mac_table = &adapter->mac_table[0]; |
| struct ixgbe_hw *hw = &adapter->hw; |
| int i; |
| |
| if (is_zero_ether_addr(addr)) |
| return -EINVAL; |
| |
| /* search table for addr, if found clear IN_USE flag and sync */ |
| for (i = 0; i < hw->mac.num_rar_entries; i++, mac_table++) { |
| /* we can only delete an entry if it is in use */ |
| if (!(mac_table->state & IXGBE_MAC_STATE_IN_USE)) |
| continue; |
| /* we only care about entries that belong to the given pool */ |
| if (mac_table->pool != pool) |
| continue; |
| /* we only care about a specific MAC address */ |
| if (!ether_addr_equal(addr, mac_table->addr)) |
| continue; |
| |
| mac_table->state |= IXGBE_MAC_STATE_MODIFIED; |
| mac_table->state &= ~IXGBE_MAC_STATE_IN_USE; |
| |
| ixgbe_sync_mac_table(adapter); |
| |
| return 0; |
| } |
| |
| return -ENOMEM; |
| } |
| /** |
| * ixgbe_write_uc_addr_list - write unicast addresses to RAR table |
| * @netdev: network interface device structure |
| * |
| * Writes unicast address list to the RAR table. |
| * Returns: -ENOMEM on failure/insufficient address space |
| * 0 on no addresses written |
| * X on writing X addresses to the RAR table |
| **/ |
| static int ixgbe_write_uc_addr_list(struct net_device *netdev, int vfn) |
| { |
| struct ixgbe_adapter *adapter = netdev_priv(netdev); |
| int count = 0; |
| |
| /* return ENOMEM indicating insufficient memory for addresses */ |
| if (netdev_uc_count(netdev) > ixgbe_available_rars(adapter, vfn)) |
| return -ENOMEM; |
| |
| if (!netdev_uc_empty(netdev)) { |
| struct netdev_hw_addr *ha; |
| netdev_for_each_uc_addr(ha, netdev) { |
| ixgbe_del_mac_filter(adapter, ha->addr, vfn); |
| ixgbe_add_mac_filter(adapter, ha->addr, vfn); |
| count++; |
| } |
| } |
| return count; |
| } |
| |
| static int ixgbe_uc_sync(struct net_device *netdev, const unsigned char *addr) |
| { |
| struct ixgbe_adapter *adapter = netdev_priv(netdev); |
| int ret; |
| |
| ret = ixgbe_add_mac_filter(adapter, addr, VMDQ_P(0)); |
| |
| return min_t(int, ret, 0); |
| } |
| |
| static int ixgbe_uc_unsync(struct net_device *netdev, const unsigned char *addr) |
| { |
| struct ixgbe_adapter *adapter = netdev_priv(netdev); |
| |
| ixgbe_del_mac_filter(adapter, addr, VMDQ_P(0)); |
| |
| return 0; |
| } |
| |
| /** |
| * ixgbe_set_rx_mode - Unicast, Multicast and Promiscuous mode set |
| * @netdev: network interface device structure |
| * |
| * The set_rx_method entry point is called whenever the unicast/multicast |
| * address list or the network interface flags are updated. This routine is |
| * responsible for configuring the hardware for proper unicast, multicast and |
| * promiscuous mode. |
| **/ |
| void ixgbe_set_rx_mode(struct net_device *netdev) |
| { |
| struct ixgbe_adapter *adapter = netdev_priv(netdev); |
| struct ixgbe_hw *hw = &adapter->hw; |
| u32 fctrl, vmolr = IXGBE_VMOLR_BAM | IXGBE_VMOLR_AUPE; |
| int count; |
| |
| /* Check for Promiscuous and All Multicast modes */ |
| fctrl = IXGBE_READ_REG(hw, IXGBE_FCTRL); |
| |
| /* set all bits that we expect to always be set */ |
| fctrl &= ~IXGBE_FCTRL_SBP; /* disable store-bad-packets */ |
| fctrl |= IXGBE_FCTRL_BAM; |
| fctrl |= IXGBE_FCTRL_DPF; /* discard pause frames when FC enabled */ |
| fctrl |= IXGBE_FCTRL_PMCF; |
| |
| /* clear the bits we are changing the status of */ |
| fctrl &= ~(IXGBE_FCTRL_UPE | IXGBE_FCTRL_MPE); |
| if (netdev->flags & IFF_PROMISC) { |
| hw->addr_ctrl.user_set_promisc = true; |
| fctrl |= (IXGBE_FCTRL_UPE | IXGBE_FCTRL_MPE); |
| vmolr |= IXGBE_VMOLR_MPE; |
| ixgbe_vlan_promisc_enable(adapter); |
| } else { |
| if (netdev->flags & IFF_ALLMULTI) { |
| fctrl |= IXGBE_FCTRL_MPE; |
| vmolr |= IXGBE_VMOLR_MPE; |
| } |
| hw->addr_ctrl.user_set_promisc = false; |
| ixgbe_vlan_promisc_disable(adapter); |
| } |
| |
| /* |
| * Write addresses to available RAR registers, if there is not |
| * sufficient space to store all the addresses then enable |
| * unicast promiscuous mode |
| */ |
| if (__dev_uc_sync(netdev, ixgbe_uc_sync, ixgbe_uc_unsync)) { |
| fctrl |= IXGBE_FCTRL_UPE; |
| vmolr |= IXGBE_VMOLR_ROPE; |
| } |
| |
| /* Write addresses to the MTA, if the attempt fails |
| * then we should just turn on promiscuous mode so |
| * that we can at least receive multicast traffic |
| */ |
| count = ixgbe_write_mc_addr_list(netdev); |
| if (count < 0) { |
| fctrl |= IXGBE_FCTRL_MPE; |
| vmolr |= IXGBE_VMOLR_MPE; |
| } else if (count) { |
| vmolr |= IXGBE_VMOLR_ROMPE; |
| } |
| |
| if (hw->mac.type != ixgbe_mac_82598EB) { |
| vmolr |= IXGBE_READ_REG(hw, IXGBE_VMOLR(VMDQ_P(0))) & |
| ~(IXGBE_VMOLR_MPE | IXGBE_VMOLR_ROMPE | |
| IXGBE_VMOLR_ROPE); |
| IXGBE_WRITE_REG(hw, IXGBE_VMOLR(VMDQ_P(0)), vmolr); |
| } |
| |
| /* This is useful for sniffing bad packets. */ |
| if (adapter->netdev->features & NETIF_F_RXALL) { |
| /* UPE and MPE will be handled by normal PROMISC logic |
| * in e1000e_set_rx_mode */ |
| fctrl |= (IXGBE_FCTRL_SBP | /* Receive bad packets */ |
| IXGBE_FCTRL_BAM | /* RX All Bcast Pkts */ |
| IXGBE_FCTRL_PMCF); /* RX All MAC Ctrl Pkts */ |
| |
| fctrl &= ~(IXGBE_FCTRL_DPF); |
| /* NOTE: VLAN filtering is disabled by setting PROMISC */ |
| } |
| |
| IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl); |
| |
| if (netdev->features & NETIF_F_HW_VLAN_CTAG_RX) |
| ixgbe_vlan_strip_enable(adapter); |
| else |
| ixgbe_vlan_strip_disable(adapter); |
| } |
| |
| static void ixgbe_napi_enable_all(struct ixgbe_adapter *adapter) |
| { |
| int q_idx; |
| |
| for (q_idx = 0; q_idx < adapter->num_q_vectors; q_idx++) { |
| ixgbe_qv_init_lock(adapter->q_vector[q_idx]); |
| napi_enable(&adapter->q_vector[q_idx]->napi); |
| } |
| } |
| |
| static void ixgbe_napi_disable_all(struct ixgbe_adapter *adapter) |
| { |
| int q_idx; |
| |
| for (q_idx = 0; q_idx < adapter->num_q_vectors; q_idx++) { |
| napi_disable(&adapter->q_vector[q_idx]->napi); |
| while (!ixgbe_qv_disable(adapter->q_vector[q_idx])) { |
| pr_info("QV %d locked\n", q_idx); |
| usleep_range(1000, 20000); |
| } |
| } |
| } |
| |
| static void ixgbe_clear_vxlan_port(struct ixgbe_adapter *adapter) |
| { |
| switch (adapter->hw.mac.type) { |
| case ixgbe_mac_X550: |
| case ixgbe_mac_X550EM_x: |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_VXLANCTRL, 0); |
| adapter->vxlan_port = 0; |
| break; |
| default: |
| break; |
| } |
| } |
| |
| #ifdef CONFIG_IXGBE_DCB |
| /** |
| * ixgbe_configure_dcb - Configure DCB hardware |
| * @adapter: ixgbe adapter struct |
| * |
| * This is called by the driver on open to configure the DCB hardware. |
| * This is also called by the gennetlink interface when reconfiguring |
| * the DCB state. |
| */ |
| static void ixgbe_configure_dcb(struct ixgbe_adapter *adapter) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| int max_frame = adapter->netdev->mtu + ETH_HLEN + ETH_FCS_LEN; |
| |
| if (!(adapter->flags & IXGBE_FLAG_DCB_ENABLED)) { |
| if (hw->mac.type == ixgbe_mac_82598EB) |
| netif_set_gso_max_size(adapter->netdev, 65536); |
| return; |
| } |
| |
| if (hw->mac.type == ixgbe_mac_82598EB) |
| netif_set_gso_max_size(adapter->netdev, 32768); |
| |
| #ifdef IXGBE_FCOE |
| if (adapter->netdev->features & NETIF_F_FCOE_MTU) |
| max_frame = max(max_frame, IXGBE_FCOE_JUMBO_FRAME_SIZE); |
| #endif |
| |
| /* reconfigure the hardware */ |
| if (adapter->dcbx_cap & DCB_CAP_DCBX_VER_CEE) { |
| ixgbe_dcb_calculate_tc_credits(hw, &adapter->dcb_cfg, max_frame, |
| DCB_TX_CONFIG); |
| ixgbe_dcb_calculate_tc_credits(hw, &adapter->dcb_cfg, max_frame, |
| DCB_RX_CONFIG); |
| ixgbe_dcb_hw_config(hw, &adapter->dcb_cfg); |
| } else if (adapter->ixgbe_ieee_ets && adapter->ixgbe_ieee_pfc) { |
| ixgbe_dcb_hw_ets(&adapter->hw, |
| adapter->ixgbe_ieee_ets, |
| max_frame); |
| ixgbe_dcb_hw_pfc_config(&adapter->hw, |
| adapter->ixgbe_ieee_pfc->pfc_en, |
| adapter->ixgbe_ieee_ets->prio_tc); |
| } |
| |
| /* Enable RSS Hash per TC */ |
| if (hw->mac.type != ixgbe_mac_82598EB) { |
| u32 msb = 0; |
| u16 rss_i = adapter->ring_feature[RING_F_RSS].indices - 1; |
| |
| while (rss_i) { |
| msb++; |
| rss_i >>= 1; |
| } |
| |
| /* write msb to all 8 TCs in one write */ |
| IXGBE_WRITE_REG(hw, IXGBE_RQTC, msb * 0x11111111); |
| } |
| } |
| #endif |
| |
| /* Additional bittime to account for IXGBE framing */ |
| #define IXGBE_ETH_FRAMING 20 |
| |
| /** |
| * ixgbe_hpbthresh - calculate high water mark for flow control |
| * |
| * @adapter: board private structure to calculate for |
| * @pb: packet buffer to calculate |
| */ |
| static int ixgbe_hpbthresh(struct ixgbe_adapter *adapter, int pb) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| struct net_device *dev = adapter->netdev; |
| int link, tc, kb, marker; |
| u32 dv_id, rx_pba; |
| |
| /* Calculate max LAN frame size */ |
| tc = link = dev->mtu + ETH_HLEN + ETH_FCS_LEN + IXGBE_ETH_FRAMING; |
| |
| #ifdef IXGBE_FCOE |
| /* FCoE traffic class uses FCOE jumbo frames */ |
| if ((dev->features & NETIF_F_FCOE_MTU) && |
| (tc < IXGBE_FCOE_JUMBO_FRAME_SIZE) && |
| (pb == ixgbe_fcoe_get_tc(adapter))) |
| tc = IXGBE_FCOE_JUMBO_FRAME_SIZE; |
| #endif |
| |
| /* Calculate delay value for device */ |
| switch (hw->mac.type) { |
| case ixgbe_mac_X540: |
| case ixgbe_mac_X550: |
| case ixgbe_mac_X550EM_x: |
| dv_id = IXGBE_DV_X540(link, tc); |
| break; |
| default: |
| dv_id = IXGBE_DV(link, tc); |
| break; |
| } |
| |
| /* Loopback switch introduces additional latency */ |
| if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) |
| dv_id += IXGBE_B2BT(tc); |
| |
| /* Delay value is calculated in bit times convert to KB */ |
| kb = IXGBE_BT2KB(dv_id); |
| rx_pba = IXGBE_READ_REG(hw, IXGBE_RXPBSIZE(pb)) >> 10; |
| |
| marker = rx_pba - kb; |
| |
| /* It is possible that the packet buffer is not large enough |
| * to provide required headroom. In this case throw an error |
| * to user and a do the best we can. |
| */ |
| if (marker < 0) { |
| e_warn(drv, "Packet Buffer(%i) can not provide enough" |
| "headroom to support flow control." |
| "Decrease MTU or number of traffic classes\n", pb); |
| marker = tc + 1; |
| } |
| |
| return marker; |
| } |
| |
| /** |
| * ixgbe_lpbthresh - calculate low water mark for for flow control |
| * |
| * @adapter: board private structure to calculate for |
| * @pb: packet buffer to calculate |
| */ |
| static int ixgbe_lpbthresh(struct ixgbe_adapter *adapter, int pb) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| struct net_device *dev = adapter->netdev; |
| int tc; |
| u32 dv_id; |
| |
| /* Calculate max LAN frame size */ |
| tc = dev->mtu + ETH_HLEN + ETH_FCS_LEN; |
| |
| #ifdef IXGBE_FCOE |
| /* FCoE traffic class uses FCOE jumbo frames */ |
| if ((dev->features & NETIF_F_FCOE_MTU) && |
| (tc < IXGBE_FCOE_JUMBO_FRAME_SIZE) && |
| (pb == netdev_get_prio_tc_map(dev, adapter->fcoe.up))) |
| tc = IXGBE_FCOE_JUMBO_FRAME_SIZE; |
| #endif |
| |
| /* Calculate delay value for device */ |
| switch (hw->mac.type) { |
| case ixgbe_mac_X540: |
| case ixgbe_mac_X550: |
| case ixgbe_mac_X550EM_x: |
| dv_id = IXGBE_LOW_DV_X540(tc); |
| break; |
| default: |
| dv_id = IXGBE_LOW_DV(tc); |
| break; |
| } |
| |
| /* Delay value is calculated in bit times convert to KB */ |
| return IXGBE_BT2KB(dv_id); |
| } |
| |
| /* |
| * ixgbe_pbthresh_setup - calculate and setup high low water marks |
| */ |
| static void ixgbe_pbthresh_setup(struct ixgbe_adapter *adapter) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| int num_tc = netdev_get_num_tc(adapter->netdev); |
| int i; |
| |
| if (!num_tc) |
| num_tc = 1; |
| |
| for (i = 0; i < num_tc; i++) { |
| hw->fc.high_water[i] = ixgbe_hpbthresh(adapter, i); |
| hw->fc.low_water[i] = ixgbe_lpbthresh(adapter, i); |
| |
| /* Low water marks must not be larger than high water marks */ |
| if (hw->fc.low_water[i] > hw->fc.high_water[i]) |
| hw->fc.low_water[i] = 0; |
| } |
| |
| for (; i < MAX_TRAFFIC_CLASS; i++) |
| hw->fc.high_water[i] = 0; |
| } |
| |
| static void ixgbe_configure_pb(struct ixgbe_adapter *adapter) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| int hdrm; |
| u8 tc = netdev_get_num_tc(adapter->netdev); |
| |
| if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE || |
| adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE) |
| hdrm = 32 << adapter->fdir_pballoc; |
| else |
| hdrm = 0; |
| |
| hw->mac.ops.set_rxpba(hw, tc, hdrm, PBA_STRATEGY_EQUAL); |
| ixgbe_pbthresh_setup(adapter); |
| } |
| |
| static void ixgbe_fdir_filter_restore(struct ixgbe_adapter *adapter) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| struct hlist_node *node2; |
| struct ixgbe_fdir_filter *filter; |
| |
| spin_lock(&adapter->fdir_perfect_lock); |
| |
| if (!hlist_empty(&adapter->fdir_filter_list)) |
| ixgbe_fdir_set_input_mask_82599(hw, &adapter->fdir_mask); |
| |
| hlist_for_each_entry_safe(filter, node2, |
| &adapter->fdir_filter_list, fdir_node) { |
| ixgbe_fdir_write_perfect_filter_82599(hw, |
| &filter->filter, |
| filter->sw_idx, |
| (filter->action == IXGBE_FDIR_DROP_QUEUE) ? |
| IXGBE_FDIR_DROP_QUEUE : |
| adapter->rx_ring[filter->action]->reg_idx); |
| } |
| |
| spin_unlock(&adapter->fdir_perfect_lock); |
| } |
| |
| static void ixgbe_macvlan_set_rx_mode(struct net_device *dev, unsigned int pool, |
| struct ixgbe_adapter *adapter) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| u32 vmolr; |
| |
| /* No unicast promiscuous support for VMDQ devices. */ |
| vmolr = IXGBE_READ_REG(hw, IXGBE_VMOLR(pool)); |
| vmolr |= (IXGBE_VMOLR_ROMPE | IXGBE_VMOLR_BAM | IXGBE_VMOLR_AUPE); |
| |
| /* clear the affected bit */ |
| vmolr &= ~IXGBE_VMOLR_MPE; |
| |
| if (dev->flags & IFF_ALLMULTI) { |
| vmolr |= IXGBE_VMOLR_MPE; |
| } else { |
| vmolr |= IXGBE_VMOLR_ROMPE; |
| hw->mac.ops.update_mc_addr_list(hw, dev); |
| } |
| ixgbe_write_uc_addr_list(adapter->netdev, pool); |
| IXGBE_WRITE_REG(hw, IXGBE_VMOLR(pool), vmolr); |
| } |
| |
| static void ixgbe_fwd_psrtype(struct ixgbe_fwd_adapter *vadapter) |
| { |
| struct ixgbe_adapter *adapter = vadapter->real_adapter; |
| int rss_i = adapter->num_rx_queues_per_pool; |
| struct ixgbe_hw *hw = &adapter->hw; |
| u16 pool = vadapter->pool; |
| u32 psrtype = IXGBE_PSRTYPE_TCPHDR | |
| IXGBE_PSRTYPE_UDPHDR | |
| IXGBE_PSRTYPE_IPV4HDR | |
| IXGBE_PSRTYPE_L2HDR | |
| IXGBE_PSRTYPE_IPV6HDR; |
| |
| if (hw->mac.type == ixgbe_mac_82598EB) |
| return; |
| |
| if (rss_i > 3) |
| psrtype |= 2 << 29; |
| else if (rss_i > 1) |
| psrtype |= 1 << 29; |
| |
| IXGBE_WRITE_REG(hw, IXGBE_PSRTYPE(VMDQ_P(pool)), psrtype); |
| } |
| |
| /** |
| * ixgbe_clean_rx_ring - Free Rx Buffers per Queue |
| * @rx_ring: ring to free buffers from |
| **/ |
| static void ixgbe_clean_rx_ring(struct ixgbe_ring *rx_ring) |
| { |
| struct device *dev = rx_ring->dev; |
| unsigned long size; |
| u16 i; |
| |
| /* ring already cleared, nothing to do */ |
| if (!rx_ring->rx_buffer_info) |
| return; |
| |
| /* Free all the Rx ring sk_buffs */ |
| for (i = 0; i < rx_ring->count; i++) { |
| struct ixgbe_rx_buffer *rx_buffer = &rx_ring->rx_buffer_info[i]; |
| |
| if (rx_buffer->skb) { |
| struct sk_buff *skb = rx_buffer->skb; |
| if (IXGBE_CB(skb)->page_released) |
| dma_unmap_page(dev, |
| IXGBE_CB(skb)->dma, |
| ixgbe_rx_bufsz(rx_ring), |
| DMA_FROM_DEVICE); |
| dev_kfree_skb(skb); |
| rx_buffer->skb = NULL; |
| } |
| |
| if (!rx_buffer->page) |
| continue; |
| |
| dma_unmap_page(dev, rx_buffer->dma, |
| ixgbe_rx_pg_size(rx_ring), DMA_FROM_DEVICE); |
| __free_pages(rx_buffer->page, ixgbe_rx_pg_order(rx_ring)); |
| |
| rx_buffer->page = NULL; |
| } |
| |
| size = sizeof(struct ixgbe_rx_buffer) * rx_ring->count; |
| memset(rx_ring->rx_buffer_info, 0, size); |
| |
| /* Zero out the descriptor ring */ |
| memset(rx_ring->desc, 0, rx_ring->size); |
| |
| rx_ring->next_to_alloc = 0; |
| rx_ring->next_to_clean = 0; |
| rx_ring->next_to_use = 0; |
| } |
| |
| static void ixgbe_disable_fwd_ring(struct ixgbe_fwd_adapter *vadapter, |
| struct ixgbe_ring *rx_ring) |
| { |
| struct ixgbe_adapter *adapter = vadapter->real_adapter; |
| int index = rx_ring->queue_index + vadapter->rx_base_queue; |
| |
| /* shutdown specific queue receive and wait for dma to settle */ |
| ixgbe_disable_rx_queue(adapter, rx_ring); |
| usleep_range(10000, 20000); |
| ixgbe_irq_disable_queues(adapter, ((u64)1 << index)); |
| ixgbe_clean_rx_ring(rx_ring); |
| rx_ring->l2_accel_priv = NULL; |
| } |
| |
| static int ixgbe_fwd_ring_down(struct net_device *vdev, |
| struct ixgbe_fwd_adapter *accel) |
| { |
| struct ixgbe_adapter *adapter = accel->real_adapter; |
| unsigned int rxbase = accel->rx_base_queue; |
| unsigned int txbase = accel->tx_base_queue; |
| int i; |
| |
| netif_tx_stop_all_queues(vdev); |
| |
| for (i = 0; i < adapter->num_rx_queues_per_pool; i++) { |
| ixgbe_disable_fwd_ring(accel, adapter->rx_ring[rxbase + i]); |
| adapter->rx_ring[rxbase + i]->netdev = adapter->netdev; |
| } |
| |
| for (i = 0; i < adapter->num_rx_queues_per_pool; i++) { |
| adapter->tx_ring[txbase + i]->l2_accel_priv = NULL; |
| adapter->tx_ring[txbase + i]->netdev = adapter->netdev; |
| } |
| |
| |
| return 0; |
| } |
| |
| static int ixgbe_fwd_ring_up(struct net_device *vdev, |
| struct ixgbe_fwd_adapter *accel) |
| { |
| struct ixgbe_adapter *adapter = accel->real_adapter; |
| unsigned int rxbase, txbase, queues; |
| int i, baseq, err = 0; |
| |
| if (!test_bit(accel->pool, &adapter->fwd_bitmask)) |
| return 0; |
| |
| baseq = accel->pool * adapter->num_rx_queues_per_pool; |
| netdev_dbg(vdev, "pool %i:%i queues %i:%i VSI bitmask %lx\n", |
| accel->pool, adapter->num_rx_pools, |
| baseq, baseq + adapter->num_rx_queues_per_pool, |
| adapter->fwd_bitmask); |
| |
| accel->netdev = vdev; |
| accel->rx_base_queue = rxbase = baseq; |
| accel->tx_base_queue = txbase = baseq; |
| |
| for (i = 0; i < adapter->num_rx_queues_per_pool; i++) |
| ixgbe_disable_fwd_ring(accel, adapter->rx_ring[rxbase + i]); |
| |
| for (i = 0; i < adapter->num_rx_queues_per_pool; i++) { |
| adapter->rx_ring[rxbase + i]->netdev = vdev; |
| adapter->rx_ring[rxbase + i]->l2_accel_priv = accel; |
| ixgbe_configure_rx_ring(adapter, adapter->rx_ring[rxbase + i]); |
| } |
| |
| for (i = 0; i < adapter->num_rx_queues_per_pool; i++) { |
| adapter->tx_ring[txbase + i]->netdev = vdev; |
| adapter->tx_ring[txbase + i]->l2_accel_priv = accel; |
| } |
| |
| queues = min_t(unsigned int, |
| adapter->num_rx_queues_per_pool, vdev->num_tx_queues); |
| err = netif_set_real_num_tx_queues(vdev, queues); |
| if (err) |
| goto fwd_queue_err; |
| |
| err = netif_set_real_num_rx_queues(vdev, queues); |
| if (err) |
| goto fwd_queue_err; |
| |
| if (is_valid_ether_addr(vdev->dev_addr)) |
| ixgbe_add_mac_filter(adapter, vdev->dev_addr, accel->pool); |
| |
| ixgbe_fwd_psrtype(accel); |
| ixgbe_macvlan_set_rx_mode(vdev, accel->pool, adapter); |
| return err; |
| fwd_queue_err: |
| ixgbe_fwd_ring_down(vdev, accel); |
| return err; |
| } |
| |
| static void ixgbe_configure_dfwd(struct ixgbe_adapter *adapter) |
| { |
| struct net_device *upper; |
| struct list_head *iter; |
| int err; |
| |
| netdev_for_each_all_upper_dev_rcu(adapter->netdev, upper, iter) { |
| if (netif_is_macvlan(upper)) { |
| struct macvlan_dev *dfwd = netdev_priv(upper); |
| struct ixgbe_fwd_adapter *vadapter = dfwd->fwd_priv; |
| |
| if (dfwd->fwd_priv) { |
| err = ixgbe_fwd_ring_up(upper, vadapter); |
| if (err) |
| continue; |
| } |
| } |
| } |
| } |
| |
| static void ixgbe_configure(struct ixgbe_adapter *adapter) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| |
| ixgbe_configure_pb(adapter); |
| #ifdef CONFIG_IXGBE_DCB |
| ixgbe_configure_dcb(adapter); |
| #endif |
| /* |
| * We must restore virtualization before VLANs or else |
| * the VLVF registers will not be populated |
| */ |
| ixgbe_configure_virtualization(adapter); |
| |
| ixgbe_set_rx_mode(adapter->netdev); |
| ixgbe_restore_vlan(adapter); |
| |
| switch (hw->mac.type) { |
| case ixgbe_mac_82599EB: |
| case ixgbe_mac_X540: |
| hw->mac.ops.disable_rx_buff(hw); |
| break; |
| default: |
| break; |
| } |
| |
| if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) { |
| ixgbe_init_fdir_signature_82599(&adapter->hw, |
| adapter->fdir_pballoc); |
| } else if (adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE) { |
| ixgbe_init_fdir_perfect_82599(&adapter->hw, |
| adapter->fdir_pballoc); |
| ixgbe_fdir_filter_restore(adapter); |
| } |
| |
| switch (hw->mac.type) { |
| case ixgbe_mac_82599EB: |
| case ixgbe_mac_X540: |
| hw->mac.ops.enable_rx_buff(hw); |
| break; |
| default: |
| break; |
| } |
| |
| #ifdef CONFIG_IXGBE_DCA |
| /* configure DCA */ |
| if (adapter->flags & IXGBE_FLAG_DCA_CAPABLE) |
| ixgbe_setup_dca(adapter); |
| #endif /* CONFIG_IXGBE_DCA */ |
| |
| #ifdef IXGBE_FCOE |
| /* configure FCoE L2 filters, redirection table, and Rx control */ |
| ixgbe_configure_fcoe(adapter); |
| |
| #endif /* IXGBE_FCOE */ |
| ixgbe_configure_tx(adapter); |
| ixgbe_configure_rx(adapter); |
| ixgbe_configure_dfwd(adapter); |
| } |
| |
| /** |
| * ixgbe_sfp_link_config - set up SFP+ link |
| * @adapter: pointer to private adapter struct |
| **/ |
| static void ixgbe_sfp_link_config(struct ixgbe_adapter *adapter) |
| { |
| /* |
| * We are assuming the worst case scenario here, and that |
| * is that an SFP was inserted/removed after the reset |
| * but before SFP detection was enabled. As such the best |
| * solution is to just start searching as soon as we start |
| */ |
| if (adapter->hw.mac.type == ixgbe_mac_82598EB) |
| adapter->flags2 |= IXGBE_FLAG2_SEARCH_FOR_SFP; |
| |
| adapter->flags2 |= IXGBE_FLAG2_SFP_NEEDS_RESET; |
| adapter->sfp_poll_time = 0; |
| } |
| |
| /** |
| * ixgbe_non_sfp_link_config - set up non-SFP+ link |
| * @hw: pointer to private hardware struct |
| * |
| * Returns 0 on success, negative on failure |
| **/ |
| static int ixgbe_non_sfp_link_config(struct ixgbe_hw *hw) |
| { |
| u32 speed; |
| bool autoneg, link_up = false; |
| int ret = IXGBE_ERR_LINK_SETUP; |
| |
| if (hw->mac.ops.check_link) |
| ret = hw->mac.ops.check_link(hw, &speed, &link_up, false); |
| |
| if (ret) |
| return ret; |
| |
| speed = hw->phy.autoneg_advertised; |
| if ((!speed) && (hw->mac.ops.get_link_capabilities)) |
| ret = hw->mac.ops.get_link_capabilities(hw, &speed, |
| &autoneg); |
| if (ret) |
| return ret; |
| |
| if (hw->mac.ops.setup_link) |
| ret = hw->mac.ops.setup_link(hw, speed, link_up); |
| |
| return ret; |
| } |
| |
| static void ixgbe_setup_gpie(struct ixgbe_adapter *adapter) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| u32 gpie = 0; |
| |
| if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) { |
| gpie = IXGBE_GPIE_MSIX_MODE | IXGBE_GPIE_PBA_SUPPORT | |
| IXGBE_GPIE_OCD; |
| gpie |= IXGBE_GPIE_EIAME; |
| /* |
| * use EIAM to auto-mask when MSI-X interrupt is asserted |
| * this saves a register write for every interrupt |
| */ |
| switch (hw->mac.type) { |
| case ixgbe_mac_82598EB: |
| IXGBE_WRITE_REG(hw, IXGBE_EIAM, IXGBE_EICS_RTX_QUEUE); |
| break; |
| case ixgbe_mac_82599EB: |
| case ixgbe_mac_X540: |
| case ixgbe_mac_X550: |
| case ixgbe_mac_X550EM_x: |
| default: |
| IXGBE_WRITE_REG(hw, IXGBE_EIAM_EX(0), 0xFFFFFFFF); |
| IXGBE_WRITE_REG(hw, IXGBE_EIAM_EX(1), 0xFFFFFFFF); |
| break; |
| } |
| } else { |
| /* legacy interrupts, use EIAM to auto-mask when reading EICR, |
| * specifically only auto mask tx and rx interrupts */ |
| IXGBE_WRITE_REG(hw, IXGBE_EIAM, IXGBE_EICS_RTX_QUEUE); |
| } |
| |
| /* XXX: to interrupt immediately for EICS writes, enable this */ |
| /* gpie |= IXGBE_GPIE_EIMEN; */ |
| |
| if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) { |
| gpie &= ~IXGBE_GPIE_VTMODE_MASK; |
| |
| switch (adapter->ring_feature[RING_F_VMDQ].mask) { |
| case IXGBE_82599_VMDQ_8Q_MASK: |
| gpie |= IXGBE_GPIE_VTMODE_16; |
| break; |
| case IXGBE_82599_VMDQ_4Q_MASK: |
| gpie |= IXGBE_GPIE_VTMODE_32; |
| break; |
| default: |
| gpie |= IXGBE_GPIE_VTMODE_64; |
| break; |
| } |
| } |
| |
| /* Enable Thermal over heat sensor interrupt */ |
| if (adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_CAPABLE) { |
| switch (adapter->hw.mac.type) { |
| case ixgbe_mac_82599EB: |
| gpie |= IXGBE_SDP0_GPIEN_8259X; |
| break; |
| default: |
| break; |
| } |
| } |
| |
| /* Enable fan failure interrupt */ |
| if (adapter->flags & IXGBE_FLAG_FAN_FAIL_CAPABLE) |
| gpie |= IXGBE_SDP1_GPIEN(hw); |
| |
| switch (hw->mac.type) { |
| case ixgbe_mac_82599EB: |
| gpie |= IXGBE_SDP1_GPIEN_8259X | IXGBE_SDP2_GPIEN_8259X; |
| break; |
| case ixgbe_mac_X550EM_x: |
| gpie |= IXGBE_SDP0_GPIEN_X540; |
| break; |
| default: |
| break; |
| } |
| |
| IXGBE_WRITE_REG(hw, IXGBE_GPIE, gpie); |
| } |
| |
| static void ixgbe_up_complete(struct ixgbe_adapter *adapter) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| int err; |
| u32 ctrl_ext; |
| |
| ixgbe_get_hw_control(adapter); |
| ixgbe_setup_gpie(adapter); |
| |
| if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) |
| ixgbe_configure_msix(adapter); |
| else |
| ixgbe_configure_msi_and_legacy(adapter); |
| |
| /* enable the optics for 82599 SFP+ fiber */ |
| if (hw->mac.ops.enable_tx_laser) |
| hw->mac.ops.enable_tx_laser(hw); |
| |
| if (hw->phy.ops.set_phy_power) |
| hw->phy.ops.set_phy_power(hw, true); |
| |
| smp_mb__before_atomic(); |
| clear_bit(__IXGBE_DOWN, &adapter->state); |
| ixgbe_napi_enable_all(adapter); |
| |
| if (ixgbe_is_sfp(hw)) { |
| ixgbe_sfp_link_config(adapter); |
| } else { |
| err = ixgbe_non_sfp_link_config(hw); |
| if (err) |
| e_err(probe, "link_config FAILED %d\n", err); |
| } |
| |
| /* clear any pending interrupts, may auto mask */ |
| IXGBE_READ_REG(hw, IXGBE_EICR); |
| ixgbe_irq_enable(adapter, true, true); |
| |
| /* |
| * If this adapter has a fan, check to see if we had a failure |
| * before we enabled the interrupt. |
| */ |
| if (adapter->flags & IXGBE_FLAG_FAN_FAIL_CAPABLE) { |
| u32 esdp = IXGBE_READ_REG(hw, IXGBE_ESDP); |
| if (esdp & IXGBE_ESDP_SDP1) |
| e_crit(drv, "Fan has stopped, replace the adapter\n"); |
| } |
| |
| /* bring the link up in the watchdog, this could race with our first |
| * link up interrupt but shouldn't be a problem */ |
| adapter->flags |= IXGBE_FLAG_NEED_LINK_UPDATE; |
| adapter->link_check_timeout = jiffies; |
| mod_timer(&adapter->service_timer, jiffies); |
| |
| /* Set PF Reset Done bit so PF/VF Mail Ops can work */ |
| ctrl_ext = IXGBE_READ_REG(hw, IXGBE_CTRL_EXT); |
| ctrl_ext |= IXGBE_CTRL_EXT_PFRSTD; |
| IXGBE_WRITE_REG(hw, IXGBE_CTRL_EXT, ctrl_ext); |
| } |
| |
| void ixgbe_reinit_locked(struct ixgbe_adapter *adapter) |
| { |
| WARN_ON(in_interrupt()); |
| /* put off any impending NetWatchDogTimeout */ |
| adapter->netdev->trans_start = jiffies; |
| |
| while (test_and_set_bit(__IXGBE_RESETTING, &adapter->state)) |
| usleep_range(1000, 2000); |
| ixgbe_down(adapter); |
| /* |
| * If SR-IOV enabled then wait a bit before bringing the adapter |
| * back up to give the VFs time to respond to the reset. The |
| * two second wait is based upon the watchdog timer cycle in |
| * the VF driver. |
| */ |
| if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) |
| msleep(2000); |
| ixgbe_up(adapter); |
| clear_bit(__IXGBE_RESETTING, &adapter->state); |
| } |
| |
| void ixgbe_up(struct ixgbe_adapter *adapter) |
| { |
| /* hardware has been reset, we need to reload some things */ |
| ixgbe_configure(adapter); |
| |
| ixgbe_up_complete(adapter); |
| } |
| |
| void ixgbe_reset(struct ixgbe_adapter *adapter) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| struct net_device *netdev = adapter->netdev; |
| int err; |
| |
| if (ixgbe_removed(hw->hw_addr)) |
| return; |
| /* lock SFP init bit to prevent race conditions with the watchdog */ |
| while (test_and_set_bit(__IXGBE_IN_SFP_INIT, &adapter->state)) |
| usleep_range(1000, 2000); |
| |
| /* clear all SFP and link config related flags while holding SFP_INIT */ |
| adapter->flags2 &= ~(IXGBE_FLAG2_SEARCH_FOR_SFP | |
| IXGBE_FLAG2_SFP_NEEDS_RESET); |
| adapter->flags &= ~IXGBE_FLAG_NEED_LINK_CONFIG; |
| |
| err = hw->mac.ops.init_hw(hw); |
| switch (err) { |
| case 0: |
| case IXGBE_ERR_SFP_NOT_PRESENT: |
| case IXGBE_ERR_SFP_NOT_SUPPORTED: |
| break; |
| case IXGBE_ERR_MASTER_REQUESTS_PENDING: |
| e_dev_err("master disable timed out\n"); |
| break; |
| case IXGBE_ERR_EEPROM_VERSION: |
| /* We are running on a pre-production device, log a warning */ |
| e_dev_warn("This device is a pre-production adapter/LOM. " |
| "Please be aware there may be issues associated with " |
| "your hardware. If you are experiencing problems " |
| "please contact your Intel or hardware " |
| "representative who provided you with this " |
| "hardware.\n"); |
| break; |
| default: |
| e_dev_err("Hardware Error: %d\n", err); |
| } |
| |
| clear_bit(__IXGBE_IN_SFP_INIT, &adapter->state); |
| |
| /* flush entries out of MAC table */ |
| ixgbe_flush_sw_mac_table(adapter); |
| __dev_uc_unsync(netdev, NULL); |
| |
| /* do not flush user set addresses */ |
| ixgbe_mac_set_default_filter(adapter); |
| |
| /* update SAN MAC vmdq pool selection */ |
| if (hw->mac.san_mac_rar_index) |
| hw->mac.ops.set_vmdq_san_mac(hw, VMDQ_P(0)); |
| |
| if (test_bit(__IXGBE_PTP_RUNNING, &adapter->state)) |
| ixgbe_ptp_reset(adapter); |
| |
| if (hw->phy.ops.set_phy_power) { |
| if (!netif_running(adapter->netdev) && !adapter->wol) |
| hw->phy.ops.set_phy_power(hw, false); |
| else |
| hw->phy.ops.set_phy_power(hw, true); |
| } |
| } |
| |
| /** |
| * ixgbe_clean_tx_ring - Free Tx Buffers |
| * @tx_ring: ring to be cleaned |
| **/ |
| static void ixgbe_clean_tx_ring(struct ixgbe_ring *tx_ring) |
| { |
| struct ixgbe_tx_buffer *tx_buffer_info; |
| unsigned long size; |
| u16 i; |
| |
| /* ring already cleared, nothing to do */ |
| if (!tx_ring->tx_buffer_info) |
| return; |
| |
| /* Free all the Tx ring sk_buffs */ |
| for (i = 0; i < tx_ring->count; i++) { |
| tx_buffer_info = &tx_ring->tx_buffer_info[i]; |
| ixgbe_unmap_and_free_tx_resource(tx_ring, tx_buffer_info); |
| } |
| |
| netdev_tx_reset_queue(txring_txq(tx_ring)); |
| |
| size = sizeof(struct ixgbe_tx_buffer) * tx_ring->count; |
| memset(tx_ring->tx_buffer_info, 0, size); |
| |
| /* Zero out the descriptor ring */ |
| memset(tx_ring->desc, 0, tx_ring->size); |
| |
| tx_ring->next_to_use = 0; |
| tx_ring->next_to_clean = 0; |
| } |
| |
| /** |
| * ixgbe_clean_all_rx_rings - Free Rx Buffers for all queues |
| * @adapter: board private structure |
| **/ |
| static void ixgbe_clean_all_rx_rings(struct ixgbe_adapter *adapter) |
| { |
| int i; |
| |
| for (i = 0; i < adapter->num_rx_queues; i++) |
| ixgbe_clean_rx_ring(adapter->rx_ring[i]); |
| } |
| |
| /** |
| * ixgbe_clean_all_tx_rings - Free Tx Buffers for all queues |
| * @adapter: board private structure |
| **/ |
| static void ixgbe_clean_all_tx_rings(struct ixgbe_adapter *adapter) |
| { |
| int i; |
| |
| for (i = 0; i < adapter->num_tx_queues; i++) |
| ixgbe_clean_tx_ring(adapter->tx_ring[i]); |
| } |
| |
| static void ixgbe_fdir_filter_exit(struct ixgbe_adapter *adapter) |
| { |
| struct hlist_node *node2; |
| struct ixgbe_fdir_filter *filter; |
| |
| spin_lock(&adapter->fdir_perfect_lock); |
| |
| hlist_for_each_entry_safe(filter, node2, |
| &adapter->fdir_filter_list, fdir_node) { |
| hlist_del(&filter->fdir_node); |
| kfree(filter); |
| } |
| adapter->fdir_filter_count = 0; |
| |
| spin_unlock(&adapter->fdir_perfect_lock); |
| } |
| |
| void ixgbe_down(struct ixgbe_adapter *adapter) |
| { |
| struct net_device *netdev = adapter->netdev; |
| struct ixgbe_hw *hw = &adapter->hw; |
| struct net_device *upper; |
| struct list_head *iter; |
| int i; |
| |
| /* signal that we are down to the interrupt handler */ |
| if (test_and_set_bit(__IXGBE_DOWN, &adapter->state)) |
| return; /* do nothing if already down */ |
| |
| /* disable receives */ |
| hw->mac.ops.disable_rx(hw); |
| |
| /* disable all enabled rx queues */ |
| for (i = 0; i < adapter->num_rx_queues; i++) |
| /* this call also flushes the previous write */ |
| ixgbe_disable_rx_queue(adapter, adapter->rx_ring[i]); |
| |
| usleep_range(10000, 20000); |
| |
| netif_tx_stop_all_queues(netdev); |
| |
| /* call carrier off first to avoid false dev_watchdog timeouts */ |
| netif_carrier_off(netdev); |
| netif_tx_disable(netdev); |
| |
| /* disable any upper devices */ |
| netdev_for_each_all_upper_dev_rcu(adapter->netdev, upper, iter) { |
| if (netif_is_macvlan(upper)) { |
| struct macvlan_dev *vlan = netdev_priv(upper); |
| |
| if (vlan->fwd_priv) { |
| netif_tx_stop_all_queues(upper); |
| netif_carrier_off(upper); |
| netif_tx_disable(upper); |
| } |
| } |
| } |
| |
| ixgbe_irq_disable(adapter); |
| |
| ixgbe_napi_disable_all(adapter); |
| |
| adapter->flags2 &= ~(IXGBE_FLAG2_FDIR_REQUIRES_REINIT | |
| IXGBE_FLAG2_RESET_REQUESTED); |
| adapter->flags &= ~IXGBE_FLAG_NEED_LINK_UPDATE; |
| |
| del_timer_sync(&adapter->service_timer); |
| |
| if (adapter->num_vfs) { |
| /* Clear EITR Select mapping */ |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_EITRSEL, 0); |
| |
| /* Mark all the VFs as inactive */ |
| for (i = 0 ; i < adapter->num_vfs; i++) |
| adapter->vfinfo[i].clear_to_send = false; |
| |
| /* ping all the active vfs to let them know we are going down */ |
| ixgbe_ping_all_vfs(adapter); |
| |
| /* Disable all VFTE/VFRE TX/RX */ |
| ixgbe_disable_tx_rx(adapter); |
| } |
| |
| /* disable transmits in the hardware now that interrupts are off */ |
| for (i = 0; i < adapter->num_tx_queues; i++) { |
| u8 reg_idx = adapter->tx_ring[i]->reg_idx; |
| IXGBE_WRITE_REG(hw, IXGBE_TXDCTL(reg_idx), IXGBE_TXDCTL_SWFLSH); |
| } |
| |
| /* Disable the Tx DMA engine on 82599 and later MAC */ |
| switch (hw->mac.type) { |
| case ixgbe_mac_82599EB: |
| case ixgbe_mac_X540: |
| case ixgbe_mac_X550: |
| case ixgbe_mac_X550EM_x: |
| IXGBE_WRITE_REG(hw, IXGBE_DMATXCTL, |
| (IXGBE_READ_REG(hw, IXGBE_DMATXCTL) & |
| ~IXGBE_DMATXCTL_TE)); |
| break; |
| default: |
| break; |
| } |
| |
| if (!pci_channel_offline(adapter->pdev)) |
| ixgbe_reset(adapter); |
| |
| /* power down the optics for 82599 SFP+ fiber */ |
| if (hw->mac.ops.disable_tx_laser) |
| hw->mac.ops.disable_tx_laser(hw); |
| |
| ixgbe_clean_all_tx_rings(adapter); |
| ixgbe_clean_all_rx_rings(adapter); |
| } |
| |
| /** |
| * ixgbe_tx_timeout - Respond to a Tx Hang |
| * @netdev: network interface device structure |
| **/ |
| static void ixgbe_tx_timeout(struct net_device *netdev) |
| { |
| struct ixgbe_adapter *adapter = netdev_priv(netdev); |
| |
| /* Do the reset outside of interrupt context */ |
| ixgbe_tx_timeout_reset(adapter); |
| } |
| |
| /** |
| * ixgbe_sw_init - Initialize general software structures (struct ixgbe_adapter) |
| * @adapter: board private structure to initialize |
| * |
| * ixgbe_sw_init initializes the Adapter private data structure. |
| * Fields are initialized based on PCI device information and |
| * OS network device settings (MTU size). |
| **/ |
| static int ixgbe_sw_init(struct ixgbe_adapter *adapter) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| struct pci_dev *pdev = adapter->pdev; |
| unsigned int rss, fdir; |
| u32 fwsm; |
| #ifdef CONFIG_IXGBE_DCB |
| int j; |
| struct tc_configuration *tc; |
| #endif |
| |
| /* PCI config space info */ |
| |
| hw->vendor_id = pdev->vendor; |
| hw->device_id = pdev->device; |
| hw->revision_id = pdev->revision; |
| hw->subsystem_vendor_id = pdev->subsystem_vendor; |
| hw->subsystem_device_id = pdev->subsystem_device; |
| |
| /* Set common capability flags and settings */ |
| rss = min_t(int, ixgbe_max_rss_indices(adapter), num_online_cpus()); |
| adapter->ring_feature[RING_F_RSS].limit = rss; |
| adapter->flags2 |= IXGBE_FLAG2_RSC_CAPABLE; |
| adapter->max_q_vectors = MAX_Q_VECTORS_82599; |
| adapter->atr_sample_rate = 20; |
| fdir = min_t(int, IXGBE_MAX_FDIR_INDICES, num_online_cpus()); |
| adapter->ring_feature[RING_F_FDIR].limit = fdir; |
| adapter->fdir_pballoc = IXGBE_FDIR_PBALLOC_64K; |
| #ifdef CONFIG_IXGBE_DCA |
| adapter->flags |= IXGBE_FLAG_DCA_CAPABLE; |
| #endif |
| #ifdef IXGBE_FCOE |
| adapter->flags |= IXGBE_FLAG_FCOE_CAPABLE; |
| adapter->flags &= ~IXGBE_FLAG_FCOE_ENABLED; |
| #ifdef CONFIG_IXGBE_DCB |
| /* Default traffic class to use for FCoE */ |
| adapter->fcoe.up = IXGBE_FCOE_DEFTC; |
| #endif /* CONFIG_IXGBE_DCB */ |
| #endif /* IXGBE_FCOE */ |
| |
| /* initialize static ixgbe jump table entries */ |
| adapter->jump_tables[0] = ixgbe_ipv4_fields; |
| |
| adapter->mac_table = kzalloc(sizeof(struct ixgbe_mac_addr) * |
| hw->mac.num_rar_entries, |
| GFP_ATOMIC); |
| if (!adapter->mac_table) |
| return -ENOMEM; |
| |
| /* Set MAC specific capability flags and exceptions */ |
| switch (hw->mac.type) { |
| case ixgbe_mac_82598EB: |
| adapter->flags2 &= ~IXGBE_FLAG2_RSC_CAPABLE; |
| |
| if (hw->device_id == IXGBE_DEV_ID_82598AT) |
| adapter->flags |= IXGBE_FLAG_FAN_FAIL_CAPABLE; |
| |
| adapter->max_q_vectors = MAX_Q_VECTORS_82598; |
| adapter->ring_feature[RING_F_FDIR].limit = 0; |
| adapter->atr_sample_rate = 0; |
| adapter->fdir_pballoc = 0; |
| #ifdef IXGBE_FCOE |
| adapter->flags &= ~IXGBE_FLAG_FCOE_CAPABLE; |
| adapter->flags &= ~IXGBE_FLAG_FCOE_ENABLED; |
| #ifdef CONFIG_IXGBE_DCB |
| adapter->fcoe.up = 0; |
| #endif /* IXGBE_DCB */ |
| #endif /* IXGBE_FCOE */ |
| break; |
| case ixgbe_mac_82599EB: |
| if (hw->device_id == IXGBE_DEV_ID_82599_T3_LOM) |
| adapter->flags2 |= IXGBE_FLAG2_TEMP_SENSOR_CAPABLE; |
| break; |
| case ixgbe_mac_X540: |
| fwsm = IXGBE_READ_REG(hw, IXGBE_FWSM(hw)); |
| if (fwsm & IXGBE_FWSM_TS_ENABLED) |
| adapter->flags2 |= IXGBE_FLAG2_TEMP_SENSOR_CAPABLE; |
| break; |
| case ixgbe_mac_X550EM_x: |
| case ixgbe_mac_X550: |
| #ifdef CONFIG_IXGBE_DCA |
| adapter->flags &= ~IXGBE_FLAG_DCA_CAPABLE; |
| #endif |
| #ifdef CONFIG_IXGBE_VXLAN |
| adapter->flags |= IXGBE_FLAG_VXLAN_OFFLOAD_CAPABLE; |
| #endif |
| break; |
| default: |
| break; |
| } |
| |
| #ifdef IXGBE_FCOE |
| /* FCoE support exists, always init the FCoE lock */ |
| spin_lock_init(&adapter->fcoe.lock); |
| |
| #endif |
| /* n-tuple support exists, always init our spinlock */ |
| spin_lock_init(&adapter->fdir_perfect_lock); |
| |
| #ifdef CONFIG_IXGBE_DCB |
| switch (hw->mac.type) { |
| case ixgbe_mac_X540: |
| case ixgbe_mac_X550: |
| case ixgbe_mac_X550EM_x: |
| adapter->dcb_cfg.num_tcs.pg_tcs = X540_TRAFFIC_CLASS; |
| adapter->dcb_cfg.num_tcs.pfc_tcs = X540_TRAFFIC_CLASS; |
| break; |
| default: |
| adapter->dcb_cfg.num_tcs.pg_tcs = MAX_TRAFFIC_CLASS; |
| adapter->dcb_cfg.num_tcs.pfc_tcs = MAX_TRAFFIC_CLASS; |
| break; |
| } |
| |
| /* Configure DCB traffic classes */ |
| for (j = 0; j < MAX_TRAFFIC_CLASS; j++) { |
| tc = &adapter->dcb_cfg.tc_config[j]; |
| tc->path[DCB_TX_CONFIG].bwg_id = 0; |
| tc->path[DCB_TX_CONFIG].bwg_percent = 12 + (j & 1); |
| tc->path[DCB_RX_CONFIG].bwg_id = 0; |
| tc->path[DCB_RX_CONFIG].bwg_percent = 12 + (j & 1); |
| tc->dcb_pfc = pfc_disabled; |
| } |
| |
| /* Initialize default user to priority mapping, UPx->TC0 */ |
| tc = &adapter->dcb_cfg.tc_config[0]; |
| tc->path[DCB_TX_CONFIG].up_to_tc_bitmap = 0xFF; |
| tc->path[DCB_RX_CONFIG].up_to_tc_bitmap = 0xFF; |
| |
| adapter->dcb_cfg.bw_percentage[DCB_TX_CONFIG][0] = 100; |
| adapter->dcb_cfg.bw_percentage[DCB_RX_CONFIG][0] = 100; |
| adapter->dcb_cfg.pfc_mode_enable = false; |
| adapter->dcb_set_bitmap = 0x00; |
| adapter->dcbx_cap = DCB_CAP_DCBX_HOST | DCB_CAP_DCBX_VER_CEE; |
| memcpy(&adapter->temp_dcb_cfg, &adapter->dcb_cfg, |
| sizeof(adapter->temp_dcb_cfg)); |
| |
| #endif |
| |
| /* default flow control settings */ |
| hw->fc.requested_mode = ixgbe_fc_full; |
| hw->fc.current_mode = ixgbe_fc_full; /* init for ethtool output */ |
| ixgbe_pbthresh_setup(adapter); |
| hw->fc.pause_time = IXGBE_DEFAULT_FCPAUSE; |
| hw->fc.send_xon = true; |
| hw->fc.disable_fc_autoneg = ixgbe_device_supports_autoneg_fc(hw); |
| |
| #ifdef CONFIG_PCI_IOV |
| if (max_vfs > 0) |
| e_dev_warn("Enabling SR-IOV VFs using the max_vfs module parameter is deprecated - please use the pci sysfs interface instead.\n"); |
| |
| /* assign number of SR-IOV VFs */ |
| if (hw->mac.type != ixgbe_mac_82598EB) { |
| if (max_vfs > IXGBE_MAX_VFS_DRV_LIMIT) { |
| adapter->num_vfs = 0; |
| e_dev_warn("max_vfs parameter out of range. Not assigning any SR-IOV VFs\n"); |
| } else { |
| adapter->num_vfs = max_vfs; |
| } |
| } |
| #endif /* CONFIG_PCI_IOV */ |
| |
| /* enable itr by default in dynamic mode */ |
| adapter->rx_itr_setting = 1; |
| adapter->tx_itr_setting = 1; |
| |
| /* set default ring sizes */ |
| adapter->tx_ring_count = IXGBE_DEFAULT_TXD; |
| adapter->rx_ring_count = IXGBE_DEFAULT_RXD; |
| |
| /* set default work limits */ |
| adapter->tx_work_limit = IXGBE_DEFAULT_TX_WORK; |
| |
| /* initialize eeprom parameters */ |
| if (ixgbe_init_eeprom_params_generic(hw)) { |
| e_dev_err("EEPROM initialization failed\n"); |
| return -EIO; |
| } |
| |
| /* PF holds first pool slot */ |
| set_bit(0, &adapter->fwd_bitmask); |
| set_bit(__IXGBE_DOWN, &adapter->state); |
| |
| return 0; |
| } |
| |
| /** |
| * ixgbe_setup_tx_resources - allocate Tx resources (Descriptors) |
| * @tx_ring: tx descriptor ring (for a specific queue) to setup |
| * |
| * Return 0 on success, negative on failure |
| **/ |
| int ixgbe_setup_tx_resources(struct ixgbe_ring *tx_ring) |
| { |
| struct device *dev = tx_ring->dev; |
| int orig_node = dev_to_node(dev); |
| int ring_node = -1; |
| int size; |
| |
| size = sizeof(struct ixgbe_tx_buffer) * tx_ring->count; |
| |
| if (tx_ring->q_vector) |
| ring_node = tx_ring->q_vector->numa_node; |
| |
| tx_ring->tx_buffer_info = vzalloc_node(size, ring_node); |
| if (!tx_ring->tx_buffer_info) |
| tx_ring->tx_buffer_info = vzalloc(size); |
| if (!tx_ring->tx_buffer_info) |
| goto err; |
| |
| u64_stats_init(&tx_ring->syncp); |
| |
| /* round up to nearest 4K */ |
| tx_ring->size = tx_ring->count * sizeof(union ixgbe_adv_tx_desc); |
| tx_ring->size = ALIGN(tx_ring->size, 4096); |
| |
| set_dev_node(dev, ring_node); |
| tx_ring->desc = dma_alloc_coherent(dev, |
| tx_ring->size, |
| &tx_ring->dma, |
| GFP_KERNEL); |
| set_dev_node(dev, orig_node); |
| if (!tx_ring->desc) |
| tx_ring->desc = dma_alloc_coherent(dev, tx_ring->size, |
| &tx_ring->dma, GFP_KERNEL); |
| if (!tx_ring->desc) |
| goto err; |
| |
| tx_ring->next_to_use = 0; |
| tx_ring->next_to_clean = 0; |
| return 0; |
| |
| err: |
| vfree(tx_ring->tx_buffer_info); |
| tx_ring->tx_buffer_info = NULL; |
| dev_err(dev, "Unable to allocate memory for the Tx descriptor ring\n"); |
| return -ENOMEM; |
| } |
| |
| /** |
| * ixgbe_setup_all_tx_resources - allocate all queues Tx resources |
| * @adapter: board private structure |
| * |
| * If this function returns with an error, then it's possible one or |
| * more of the rings is populated (while the rest are not). It is the |
| * callers duty to clean those orphaned rings. |
| * |
| * Return 0 on success, negative on failure |
| **/ |
| static int ixgbe_setup_all_tx_resources(struct ixgbe_adapter *adapter) |
| { |
| int i, err = 0; |
| |
| for (i = 0; i < adapter->num_tx_queues; i++) { |
| err = ixgbe_setup_tx_resources(adapter->tx_ring[i]); |
| if (!err) |
| continue; |
| |
| e_err(probe, "Allocation for Tx Queue %u failed\n", i); |
| goto err_setup_tx; |
| } |
| |
| return 0; |
| err_setup_tx: |
| /* rewind the index freeing the rings as we go */ |
| while (i--) |
| ixgbe_free_tx_resources(adapter->tx_ring[i]); |
| return err; |
| } |
| |
| /** |
| * ixgbe_setup_rx_resources - allocate Rx resources (Descriptors) |
| * @rx_ring: rx descriptor ring (for a specific queue) to setup |
| * |
| * Returns 0 on success, negative on failure |
| **/ |
| int ixgbe_setup_rx_resources(struct ixgbe_ring *rx_ring) |
| { |
| struct device *dev = rx_ring->dev; |
| int orig_node = dev_to_node(dev); |
| int ring_node = -1; |
| int size; |
| |
| size = sizeof(struct ixgbe_rx_buffer) * rx_ring->count; |
| |
| if (rx_ring->q_vector) |
| ring_node = rx_ring->q_vector->numa_node; |
| |
| rx_ring->rx_buffer_info = vzalloc_node(size, ring_node); |
| if (!rx_ring->rx_buffer_info) |
| rx_ring->rx_buffer_info = vzalloc(size); |
| if (!rx_ring->rx_buffer_info) |
| goto err; |
| |
| u64_stats_init(&rx_ring->syncp); |
| |
| /* Round up to nearest 4K */ |
| rx_ring->size = rx_ring->count * sizeof(union ixgbe_adv_rx_desc); |
| rx_ring->size = ALIGN(rx_ring->size, 4096); |
| |
| set_dev_node(dev, ring_node); |
| rx_ring->desc = dma_alloc_coherent(dev, |
| rx_ring->size, |
| &rx_ring->dma, |
| GFP_KERNEL); |
| set_dev_node(dev, orig_node); |
| if (!rx_ring->desc) |
| rx_ring->desc = dma_alloc_coherent(dev, rx_ring->size, |
| &rx_ring->dma, GFP_KERNEL); |
| if (!rx_ring->desc) |
| goto err; |
| |
| rx_ring->next_to_clean = 0; |
| rx_ring->next_to_use = 0; |
| |
| return 0; |
| err: |
| vfree(rx_ring->rx_buffer_info); |
| rx_ring->rx_buffer_info = NULL; |
| dev_err(dev, "Unable to allocate memory for the Rx descriptor ring\n"); |
| return -ENOMEM; |
| } |
| |
| /** |
| * ixgbe_setup_all_rx_resources - allocate all queues Rx resources |
| * @adapter: board private structure |
| * |
| * If this function returns with an error, then it's possible one or |
| * more of the rings is populated (while the rest are not). It is the |
| * callers duty to clean those orphaned rings. |
| * |
| * Return 0 on success, negative on failure |
| **/ |
| static int ixgbe_setup_all_rx_resources(struct ixgbe_adapter *adapter) |
| { |
| int i, err = 0; |
| |
| for (i = 0; i < adapter->num_rx_queues; i++) { |
| err = ixgbe_setup_rx_resources(adapter->rx_ring[i]); |
| if (!err) |
| continue; |
| |
| e_err(probe, "Allocation for Rx Queue %u failed\n", i); |
| goto err_setup_rx; |
| } |
| |
| #ifdef IXGBE_FCOE |
| err = ixgbe_setup_fcoe_ddp_resources(adapter); |
| if (!err) |
| #endif |
| return 0; |
| err_setup_rx: |
| /* rewind the index freeing the rings as we go */ |
| while (i--) |
| ixgbe_free_rx_resources(adapter->rx_ring[i]); |
| return err; |
| } |
| |
| /** |
| * ixgbe_free_tx_resources - Free Tx Resources per Queue |
| * @tx_ring: Tx descriptor ring for a specific queue |
| * |
| * Free all transmit software resources |
| **/ |
| void ixgbe_free_tx_resources(struct ixgbe_ring *tx_ring) |
| { |
| ixgbe_clean_tx_ring(tx_ring); |
| |
| vfree(tx_ring->tx_buffer_info); |
| tx_ring->tx_buffer_info = NULL; |
| |
| /* if not set, then don't free */ |
| if (!tx_ring->desc) |
| return; |
| |
| dma_free_coherent(tx_ring->dev, tx_ring->size, |
| tx_ring->desc, tx_ring->dma); |
| |
| tx_ring->desc = NULL; |
| } |
| |
| /** |
| * ixgbe_free_all_tx_resources - Free Tx Resources for All Queues |
| * @adapter: board private structure |
| * |
| * Free all transmit software resources |
| **/ |
| static void ixgbe_free_all_tx_resources(struct ixgbe_adapter *adapter) |
| { |
| int i; |
| |
| for (i = 0; i < adapter->num_tx_queues; i++) |
| if (adapter->tx_ring[i]->desc) |
| ixgbe_free_tx_resources(adapter->tx_ring[i]); |
| } |
| |
| /** |
| * ixgbe_free_rx_resources - Free Rx Resources |
| * @rx_ring: ring to clean the resources from |
| * |
| * Free all receive software resources |
| **/ |
| void ixgbe_free_rx_resources(struct ixgbe_ring *rx_ring) |
| { |
| ixgbe_clean_rx_ring(rx_ring); |
| |
| vfree(rx_ring->rx_buffer_info); |
| rx_ring->rx_buffer_info = NULL; |
| |
| /* if not set, then don't free */ |
| if (!rx_ring->desc) |
| return; |
| |
| dma_free_coherent(rx_ring->dev, rx_ring->size, |
| rx_ring->desc, rx_ring->dma); |
| |
| rx_ring->desc = NULL; |
| } |
| |
| /** |
| * ixgbe_free_all_rx_resources - Free Rx Resources for All Queues |
| * @adapter: board private structure |
| * |
| * Free all receive software resources |
| **/ |
| static void ixgbe_free_all_rx_resources(struct ixgbe_adapter *adapter) |
| { |
| int i; |
| |
| #ifdef IXGBE_FCOE |
| ixgbe_free_fcoe_ddp_resources(adapter); |
| |
| #endif |
| for (i = 0; i < adapter->num_rx_queues; i++) |
| if (adapter->rx_ring[i]->desc) |
| ixgbe_free_rx_resources(adapter->rx_ring[i]); |
| } |
| |
| /** |
| * ixgbe_change_mtu - Change the Maximum Transfer Unit |
| * @netdev: network interface device structure |
| * @new_mtu: new value for maximum frame size |
| * |
| * Returns 0 on success, negative on failure |
| **/ |
| static int ixgbe_change_mtu(struct net_device *netdev, int new_mtu) |
| { |
| struct ixgbe_adapter *adapter = netdev_priv(netdev); |
| int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN; |
| |
| /* MTU < 68 is an error and causes problems on some kernels */ |
| if ((new_mtu < 68) || (max_frame > IXGBE_MAX_JUMBO_FRAME_SIZE)) |
| return -EINVAL; |
| |
| /* |
| * For 82599EB we cannot allow legacy VFs to enable their receive |
| * paths when MTU greater than 1500 is configured. So display a |
| * warning that legacy VFs will be disabled. |
| */ |
| if ((adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) && |
| (adapter->hw.mac.type == ixgbe_mac_82599EB) && |
| (max_frame > (ETH_FRAME_LEN + ETH_FCS_LEN))) |
| e_warn(probe, "Setting MTU > 1500 will disable legacy VFs\n"); |
| |
| e_info(probe, "changing MTU from %d to %d\n", netdev->mtu, new_mtu); |
| |
| /* must set new MTU before calling down or up */ |
| netdev->mtu = new_mtu; |
| |
| if (netif_running(netdev)) |
| ixgbe_reinit_locked(adapter); |
| |
| return 0; |
| } |
| |
| /** |
| * ixgbe_open - Called when a network interface is made active |
| * @netdev: network interface device structure |
| * |
| * Returns 0 on success, negative value on failure |
| * |
| * The open entry point is called when a network interface is made |
| * active by the system (IFF_UP). At this point all resources needed |
| * for transmit and receive operations are allocated, the interrupt |
| * handler is registered with the OS, the watchdog timer is started, |
| * and the stack is notified that the interface is ready. |
| **/ |
| int ixgbe_open(struct net_device *netdev) |
| { |
| struct ixgbe_adapter *adapter = netdev_priv(netdev); |
| struct ixgbe_hw *hw = &adapter->hw; |
| int err, queues; |
| |
| /* disallow open during test */ |
| if (test_bit(__IXGBE_TESTING, &adapter->state)) |
| return -EBUSY; |
| |
| netif_carrier_off(netdev); |
| |
| /* allocate transmit descriptors */ |
| err = ixgbe_setup_all_tx_resources(adapter); |
| if (err) |
| goto err_setup_tx; |
| |
| /* allocate receive descriptors */ |
| err = ixgbe_setup_all_rx_resources(adapter); |
| if (err) |
| goto err_setup_rx; |
| |
| ixgbe_configure(adapter); |
| |
| err = ixgbe_request_irq(adapter); |
| if (err) |
| goto err_req_irq; |
| |
| /* Notify the stack of the actual queue counts. */ |
| if (adapter->num_rx_pools > 1) |
| queues = adapter->num_rx_queues_per_pool; |
| else |
| queues = adapter->num_tx_queues; |
| |
| err = netif_set_real_num_tx_queues(netdev, queues); |
| if (err) |
| goto err_set_queues; |
| |
| if (adapter->num_rx_pools > 1 && |
| adapter->num_rx_queues > IXGBE_MAX_L2A_QUEUES) |
| queues = IXGBE_MAX_L2A_QUEUES; |
| else |
| queues = adapter->num_rx_queues; |
| err = netif_set_real_num_rx_queues(netdev, queues); |
| if (err) |
| goto err_set_queues; |
| |
| ixgbe_ptp_init(adapter); |
| |
| ixgbe_up_complete(adapter); |
| |
| ixgbe_clear_vxlan_port(adapter); |
| #ifdef CONFIG_IXGBE_VXLAN |
| vxlan_get_rx_port(netdev); |
| #endif |
| |
| return 0; |
| |
| err_set_queues: |
| ixgbe_free_irq(adapter); |
| err_req_irq: |
| ixgbe_free_all_rx_resources(adapter); |
| if (hw->phy.ops.set_phy_power && !adapter->wol) |
| hw->phy.ops.set_phy_power(&adapter->hw, false); |
| err_setup_rx: |
| ixgbe_free_all_tx_resources(adapter); |
| err_setup_tx: |
| ixgbe_reset(adapter); |
| |
| return err; |
| } |
| |
| static void ixgbe_close_suspend(struct ixgbe_adapter *adapter) |
| { |
| ixgbe_ptp_suspend(adapter); |
| |
| if (adapter->hw.phy.ops.enter_lplu) { |
| adapter->hw.phy.reset_disable = true; |
| ixgbe_down(adapter); |
| adapter->hw.phy.ops.enter_lplu(&adapter->hw); |
| adapter->hw.phy.reset_disable = false; |
| } else { |
| ixgbe_down(adapter); |
| } |
| |
| ixgbe_free_irq(adapter); |
| |
| ixgbe_free_all_tx_resources(adapter); |
| ixgbe_free_all_rx_resources(adapter); |
| } |
| |
| /** |
| * ixgbe_close - Disables a network interface |
| * @netdev: network interface device structure |
| * |
| * Returns 0, this is not allowed to fail |
| * |
| * The close entry point is called when an interface is de-activated |
| * by the OS. The hardware is still under the drivers control, but |
| * needs to be disabled. A global MAC reset is issued to stop the |
| * hardware, and all transmit and receive resources are freed. |
| **/ |
| int ixgbe_close(struct net_device *netdev) |
| { |
| struct ixgbe_adapter *adapter = netdev_priv(netdev); |
| |
| ixgbe_ptp_stop(adapter); |
| |
| ixgbe_close_suspend(adapter); |
| |
| ixgbe_fdir_filter_exit(adapter); |
| |
| ixgbe_release_hw_control(adapter); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM |
| static int ixgbe_resume(struct pci_dev *pdev) |
| { |
| struct ixgbe_adapter *adapter = pci_get_drvdata(pdev); |
| struct net_device *netdev = adapter->netdev; |
| u32 err; |
| |
| adapter->hw.hw_addr = adapter->io_addr; |
| pci_set_power_state(pdev, PCI_D0); |
| pci_restore_state(pdev); |
| /* |
| * pci_restore_state clears dev->state_saved so call |
| * pci_save_state to restore it. |
| */ |
| pci_save_state(pdev); |
| |
| err = pci_enable_device_mem(pdev); |
| if (err) { |
| e_dev_err("Cannot enable PCI device from suspend\n"); |
| return err; |
| } |
| smp_mb__before_atomic(); |
| clear_bit(__IXGBE_DISABLED, &adapter->state); |
| pci_set_master(pdev); |
| |
| pci_wake_from_d3(pdev, false); |
| |
| ixgbe_reset(adapter); |
| |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_WUS, ~0); |
| |
| rtnl_lock(); |
| err = ixgbe_init_interrupt_scheme(adapter); |
| if (!err && netif_running(netdev)) |
| err = ixgbe_open(netdev); |
| |
| rtnl_unlock(); |
| |
| if (err) |
| return err; |
| |
| netif_device_attach(netdev); |
| |
| return 0; |
| } |
| #endif /* CONFIG_PM */ |
| |
| static int __ixgbe_shutdown(struct pci_dev *pdev, bool *enable_wake) |
| { |
| struct ixgbe_adapter *adapter = pci_get_drvdata(pdev); |
| struct net_device *netdev = adapter->netdev; |
| struct ixgbe_hw *hw = &adapter->hw; |
| u32 ctrl, fctrl; |
| u32 wufc = adapter->wol; |
| #ifdef CONFIG_PM |
| int retval = 0; |
| #endif |
| |
| netif_device_detach(netdev); |
| |
| rtnl_lock(); |
| if (netif_running(netdev)) |
| ixgbe_close_suspend(adapter); |
| rtnl_unlock(); |
| |
| ixgbe_clear_interrupt_scheme(adapter); |
| |
| #ifdef CONFIG_PM |
| retval = pci_save_state(pdev); |
| if (retval) |
| return retval; |
| |
| #endif |
| if (hw->mac.ops.stop_link_on_d3) |
| hw->mac.ops.stop_link_on_d3(hw); |
| |
| if (wufc) { |
| ixgbe_set_rx_mode(netdev); |
| |
| /* enable the optics for 82599 SFP+ fiber as we can WoL */ |
| if (hw->mac.ops.enable_tx_laser) |
| hw->mac.ops.enable_tx_laser(hw); |
| |
| /* turn on all-multi mode if wake on multicast is enabled */ |
| if (wufc & IXGBE_WUFC_MC) { |
| fctrl = IXGBE_READ_REG(hw, IXGBE_FCTRL); |
| fctrl |= IXGBE_FCTRL_MPE; |
| IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl); |
| } |
| |
| ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL); |
| ctrl |= IXGBE_CTRL_GIO_DIS; |
| IXGBE_WRITE_REG(hw, IXGBE_CTRL, ctrl); |
| |
| IXGBE_WRITE_REG(hw, IXGBE_WUFC, wufc); |
| } else { |
| IXGBE_WRITE_REG(hw, IXGBE_WUC, 0); |
| IXGBE_WRITE_REG(hw, IXGBE_WUFC, 0); |
| } |
| |
| switch (hw->mac.type) { |
| case ixgbe_mac_82598EB: |
| pci_wake_from_d3(pdev, false); |
| break; |
| case ixgbe_mac_82599EB: |
| case ixgbe_mac_X540: |
| case ixgbe_mac_X550: |
| case ixgbe_mac_X550EM_x: |
| pci_wake_from_d3(pdev, !!wufc); |
| break; |
| default: |
| break; |
| } |
| |
| *enable_wake = !!wufc; |
| if (hw->phy.ops.set_phy_power && !*enable_wake) |
| hw->phy.ops.set_phy_power(hw, false); |
| |
| ixgbe_release_hw_control(adapter); |
| |
| if (!test_and_set_bit(__IXGBE_DISABLED, &adapter->state)) |
| pci_disable_device(pdev); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM |
| static int ixgbe_suspend(struct pci_dev *pdev, pm_message_t state) |
| { |
| int retval; |
| bool wake; |
| |
| retval = __ixgbe_shutdown(pdev, &wake); |
| if (retval) |
| return retval; |
| |
| if (wake) { |
| pci_prepare_to_sleep(pdev); |
| } else { |
| pci_wake_from_d3(pdev, false); |
| pci_set_power_state(pdev, PCI_D3hot); |
| } |
| |
| return 0; |
| } |
| #endif /* CONFIG_PM */ |
| |
| static void ixgbe_shutdown(struct pci_dev *pdev) |
| { |
| bool wake; |
| |
| __ixgbe_shutdown(pdev, &wake); |
| |
| if (system_state == SYSTEM_POWER_OFF) { |
| pci_wake_from_d3(pdev, wake); |
| pci_set_power_state(pdev, PCI_D3hot); |
| } |
| } |
| |
| /** |
| * ixgbe_update_stats - Update the board statistics counters. |
| * @adapter: board private structure |
| **/ |
| void ixgbe_update_stats(struct ixgbe_adapter *adapter) |
| { |
| struct net_device *netdev = adapter->netdev; |
| struct ixgbe_hw *hw = &adapter->hw; |
| struct ixgbe_hw_stats *hwstats = &adapter->stats; |
| u64 total_mpc = 0; |
| u32 i, missed_rx = 0, mpc, bprc, lxon, lxoff, xon_off_tot; |
| u64 non_eop_descs = 0, restart_queue = 0, tx_busy = 0; |
| u64 alloc_rx_page_failed = 0, alloc_rx_buff_failed = 0; |
| u64 bytes = 0, packets = 0, hw_csum_rx_error = 0; |
| |
| if (test_bit(__IXGBE_DOWN, &adapter->state) || |
| test_bit(__IXGBE_RESETTING, &adapter->state)) |
| return; |
| |
| if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) { |
| u64 rsc_count = 0; |
| u64 rsc_flush = 0; |
| for (i = 0; i < adapter->num_rx_queues; i++) { |
| rsc_count += adapter->rx_ring[i]->rx_stats.rsc_count; |
| rsc_flush += adapter->rx_ring[i]->rx_stats.rsc_flush; |
| } |
| adapter->rsc_total_count = rsc_count; |
| adapter->rsc_total_flush = rsc_flush; |
| } |
| |
| for (i = 0; i < adapter->num_rx_queues; i++) { |
| struct ixgbe_ring *rx_ring = adapter->rx_ring[i]; |
| non_eop_descs += rx_ring->rx_stats.non_eop_descs; |
| alloc_rx_page_failed += rx_ring->rx_stats.alloc_rx_page_failed; |
| alloc_rx_buff_failed += rx_ring->rx_stats.alloc_rx_buff_failed; |
| hw_csum_rx_error += rx_ring->rx_stats.csum_err; |
| bytes += rx_ring->stats.bytes; |
| packets += rx_ring->stats.packets; |
| } |
| adapter->non_eop_descs = non_eop_descs; |
| adapter->alloc_rx_page_failed = alloc_rx_page_failed; |
| adapter->alloc_rx_buff_failed = alloc_rx_buff_failed; |
| adapter->hw_csum_rx_error = hw_csum_rx_error; |
| netdev->stats.rx_bytes = bytes; |
| netdev->stats.rx_packets = packets; |
| |
| bytes = 0; |
| packets = 0; |
| /* gather some stats to the adapter struct that are per queue */ |
| for (i = 0; i < adapter->num_tx_queues; i++) { |
| struct ixgbe_ring *tx_ring = adapter->tx_ring[i]; |
| restart_queue += tx_ring->tx_stats.restart_queue; |
| tx_busy += tx_ring->tx_stats.tx_busy; |
| bytes += tx_ring->stats.bytes; |
| packets += tx_ring->stats.packets; |
| } |
| adapter->restart_queue = restart_queue; |
| adapter->tx_busy = tx_busy; |
| netdev->stats.tx_bytes = bytes; |
| netdev->stats.tx_packets = packets; |
| |
| hwstats->crcerrs += IXGBE_READ_REG(hw, IXGBE_CRCERRS); |
| |
| /* 8 register reads */ |
| for (i = 0; i < 8; i++) { |
| /* for packet buffers not used, the register should read 0 */ |
| mpc = IXGBE_READ_REG(hw, IXGBE_MPC(i)); |
| missed_rx += mpc; |
| hwstats->mpc[i] += mpc; |
| total_mpc += hwstats->mpc[i]; |
| hwstats->pxontxc[i] += IXGBE_READ_REG(hw, IXGBE_PXONTXC(i)); |
| hwstats->pxofftxc[i] += IXGBE_READ_REG(hw, IXGBE_PXOFFTXC(i)); |
| switch (hw->mac.type) { |
| case ixgbe_mac_82598EB: |
| hwstats->rnbc[i] += IXGBE_READ_REG(hw, IXGBE_RNBC(i)); |
| hwstats->qbtc[i] += IXGBE_READ_REG(hw, IXGBE_QBTC(i)); |
| hwstats->qbrc[i] += IXGBE_READ_REG(hw, IXGBE_QBRC(i)); |
| hwstats->pxonrxc[i] += |
| IXGBE_READ_REG(hw, IXGBE_PXONRXC(i)); |
| break; |
| case ixgbe_mac_82599EB: |
| case ixgbe_mac_X540: |
| case ixgbe_mac_X550: |
| case ixgbe_mac_X550EM_x: |
| hwstats->pxonrxc[i] += |
| IXGBE_READ_REG(hw, IXGBE_PXONRXCNT(i)); |
| break; |
| default: |
| break; |
| } |
| } |
| |
| /*16 register reads */ |
| for (i = 0; i < 16; i++) { |
| hwstats->qptc[i] += IXGBE_READ_REG(hw, IXGBE_QPTC(i)); |
| hwstats->qprc[i] += IXGBE_READ_REG(hw, IXGBE_QPRC(i)); |
| if ((hw->mac.type == ixgbe_mac_82599EB) || |
| (hw->mac.type == ixgbe_mac_X540) || |
| (hw->mac.type == ixgbe_mac_X550) || |
| (hw->mac.type == ixgbe_mac_X550EM_x)) { |
| hwstats->qbtc[i] += IXGBE_READ_REG(hw, IXGBE_QBTC_L(i)); |
| IXGBE_READ_REG(hw, IXGBE_QBTC_H(i)); /* to clear */ |
| hwstats->qbrc[i] += IXGBE_READ_REG(hw, IXGBE_QBRC_L(i)); |
| IXGBE_READ_REG(hw, IXGBE_QBRC_H(i)); /* to clear */ |
| } |
| } |
| |
| hwstats->gprc += IXGBE_READ_REG(hw, IXGBE_GPRC); |
| /* work around hardware counting issue */ |
| hwstats->gprc -= missed_rx; |
| |
| ixgbe_update_xoff_received(adapter); |
| |
| /* 82598 hardware only has a 32 bit counter in the high register */ |
| switch (hw->mac.type) { |
| case ixgbe_mac_82598EB: |
| hwstats->lxonrxc += IXGBE_READ_REG(hw, IXGBE_LXONRXC); |
| hwstats->gorc += IXGBE_READ_REG(hw, IXGBE_GORCH); |
| hwstats->gotc += IXGBE_READ_REG(hw, IXGBE_GOTCH); |
| hwstats->tor += IXGBE_READ_REG(hw, IXGBE_TORH); |
| break; |
| case ixgbe_mac_X540: |
| case ixgbe_mac_X550: |
| case ixgbe_mac_X550EM_x: |
| /* OS2BMC stats are X540 and later */ |
| hwstats->o2bgptc += IXGBE_READ_REG(hw, IXGBE_O2BGPTC); |
| hwstats->o2bspc += IXGBE_READ_REG(hw, IXGBE_O2BSPC); |
| hwstats->b2ospc += IXGBE_READ_REG(hw, IXGBE_B2OSPC); |
| hwstats->b2ogprc += IXGBE_READ_REG(hw, IXGBE_B2OGPRC); |
| case ixgbe_mac_82599EB: |
| for (i = 0; i < 16; i++) |
| adapter->hw_rx_no_dma_resources += |
| IXGBE_READ_REG(hw, IXGBE_QPRDC(i)); |
| hwstats->gorc += IXGBE_READ_REG(hw, IXGBE_GORCL); |
| IXGBE_READ_REG(hw, IXGBE_GORCH); /* to clear */ |
| hwstats->gotc += IXGBE_READ_REG(hw, IXGBE_GOTCL); |
| IXGBE_READ_REG(hw, IXGBE_GOTCH); /* to clear */ |
| hwstats->tor += IXGBE_READ_REG(hw, IXGBE_TORL); |
| IXGBE_READ_REG(hw, IXGBE_TORH); /* to clear */ |
| hwstats->lxonrxc += IXGBE_READ_REG(hw, IXGBE_LXONRXCNT); |
| hwstats->fdirmatch += IXGBE_READ_REG(hw, IXGBE_FDIRMATCH); |
| hwstats->fdirmiss += IXGBE_READ_REG(hw, IXGBE_FDIRMISS); |
| #ifdef IXGBE_FCOE |
| hwstats->fccrc += IXGBE_READ_REG(hw, IXGBE_FCCRC); |
| hwstats->fcoerpdc += IXGBE_READ_REG(hw, IXGBE_FCOERPDC); |
| hwstats->fcoeprc += IXGBE_READ_REG(hw, IXGBE_FCOEPRC); |
| hwstats->fcoeptc += IXGBE_READ_REG(hw, IXGBE_FCOEPTC); |
| hwstats->fcoedwrc += IXGBE_READ_REG(hw, IXGBE_FCOEDWRC); |
| hwstats->fcoedwtc += IXGBE_READ_REG(hw, IXGBE_FCOEDWTC); |
| /* Add up per cpu counters for total ddp aloc fail */ |
| if (adapter->fcoe.ddp_pool) { |
| struct ixgbe_fcoe *fcoe = &adapter->fcoe; |
| struct ixgbe_fcoe_ddp_pool *ddp_pool; |
| unsigned int cpu; |
| u64 noddp = 0, noddp_ext_buff = 0; |
| for_each_possible_cpu(cpu) { |
| ddp_pool = per_cpu_ptr(fcoe->ddp_pool, cpu); |
| noddp += ddp_pool->noddp; |
| noddp_ext_buff += ddp_pool->noddp_ext_buff; |
| } |
| hwstats->fcoe_noddp = noddp; |
| hwstats->fcoe_noddp_ext_buff = noddp_ext_buff; |
| } |
| #endif /* IXGBE_FCOE */ |
| break; |
| default: |
| break; |
| } |
| bprc = IXGBE_READ_REG(hw, IXGBE_BPRC); |
| hwstats->bprc += bprc; |
| hwstats->mprc += IXGBE_READ_REG(hw, IXGBE_MPRC); |
| if (hw->mac.type == ixgbe_mac_82598EB) |
| hwstats->mprc -= bprc; |
| hwstats->roc += IXGBE_READ_REG(hw, IXGBE_ROC); |
| hwstats->prc64 += IXGBE_READ_REG(hw, IXGBE_PRC64); |
| hwstats->prc127 += IXGBE_READ_REG(hw, IXGBE_PRC127); |
| hwstats->prc255 += IXGBE_READ_REG(hw, IXGBE_PRC255); |
| hwstats->prc511 += IXGBE_READ_REG(hw, IXGBE_PRC511); |
| hwstats->prc1023 += IXGBE_READ_REG(hw, IXGBE_PRC1023); |
| hwstats->prc1522 += IXGBE_READ_REG(hw, IXGBE_PRC1522); |
| hwstats->rlec += IXGBE_READ_REG(hw, IXGBE_RLEC); |
| lxon = IXGBE_READ_REG(hw, IXGBE_LXONTXC); |
| hwstats->lxontxc += lxon; |
| lxoff = IXGBE_READ_REG(hw, IXGBE_LXOFFTXC); |
| hwstats->lxofftxc += lxoff; |
| hwstats->gptc += IXGBE_READ_REG(hw, IXGBE_GPTC); |
| hwstats->mptc += IXGBE_READ_REG(hw, IXGBE_MPTC); |
| /* |
| * 82598 errata - tx of flow control packets is included in tx counters |
| */ |
| xon_off_tot = lxon + lxoff; |
| hwstats->gptc -= xon_off_tot; |
| hwstats->mptc -= xon_off_tot; |
| hwstats->gotc -= (xon_off_tot * (ETH_ZLEN + ETH_FCS_LEN)); |
| hwstats->ruc += IXGBE_READ_REG(hw, IXGBE_RUC); |
| hwstats->rfc += IXGBE_READ_REG(hw, IXGBE_RFC); |
| hwstats->rjc += IXGBE_READ_REG(hw, IXGBE_RJC); |
| hwstats->tpr += IXGBE_READ_REG(hw, IXGBE_TPR); |
| hwstats->ptc64 += IXGBE_READ_REG(hw, IXGBE_PTC64); |
| hwstats->ptc64 -= xon_off_tot; |
| hwstats->ptc127 += IXGBE_READ_REG(hw, IXGBE_PTC127); |
| hwstats->ptc255 += IXGBE_READ_REG(hw, IXGBE_PTC255); |
| hwstats->ptc511 += IXGBE_READ_REG(hw, IXGBE_PTC511); |
| hwstats->ptc1023 += IXGBE_READ_REG(hw, IXGBE_PTC1023); |
| hwstats->ptc1522 += IXGBE_READ_REG(hw, IXGBE_PTC1522); |
| hwstats->bptc += IXGBE_READ_REG(hw, IXGBE_BPTC); |
| |
| /* Fill out the OS statistics structure */ |
| netdev->stats.multicast = hwstats->mprc; |
| |
| /* Rx Errors */ |
| netdev->stats.rx_errors = hwstats->crcerrs + hwstats->rlec; |
| netdev->stats.rx_dropped = 0; |
| netdev->stats.rx_length_errors = hwstats->rlec; |
| netdev->stats.rx_crc_errors = hwstats->crcerrs; |
| netdev->stats.rx_missed_errors = total_mpc; |
| } |
| |
| /** |
| * ixgbe_fdir_reinit_subtask - worker thread to reinit FDIR filter table |
| * @adapter: pointer to the device adapter structure |
| **/ |
| static void ixgbe_fdir_reinit_subtask(struct ixgbe_adapter *adapter) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| int i; |
| |
| if (!(adapter->flags2 & IXGBE_FLAG2_FDIR_REQUIRES_REINIT)) |
| return; |
| |
| adapter->flags2 &= ~IXGBE_FLAG2_FDIR_REQUIRES_REINIT; |
| |
| /* if interface is down do nothing */ |
| if (test_bit(__IXGBE_DOWN, &adapter->state)) |
| return; |
| |
| /* do nothing if we are not using signature filters */ |
| if (!(adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE)) |
| return; |
| |
| adapter->fdir_overflow++; |
| |
| if (ixgbe_reinit_fdir_tables_82599(hw) == 0) { |
| for (i = 0; i < adapter->num_tx_queues; i++) |
| set_bit(__IXGBE_TX_FDIR_INIT_DONE, |
| &(adapter->tx_ring[i]->state)); |
| /* re-enable flow director interrupts */ |
| IXGBE_WRITE_REG(hw, IXGBE_EIMS, IXGBE_EIMS_FLOW_DIR); |
| } else { |
| e_err(probe, "failed to finish FDIR re-initialization, " |
| "ignored adding FDIR ATR filters\n"); |
| } |
| } |
| |
| /** |
| * ixgbe_check_hang_subtask - check for hung queues and dropped interrupts |
| * @adapter: pointer to the device adapter structure |
| * |
| * This function serves two purposes. First it strobes the interrupt lines |
| * in order to make certain interrupts are occurring. Secondly it sets the |
| * bits needed to check for TX hangs. As a result we should immediately |
| * determine if a hang has occurred. |
| */ |
| static void ixgbe_check_hang_subtask(struct ixgbe_adapter *adapter) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| u64 eics = 0; |
| int i; |
| |
| /* If we're down, removing or resetting, just bail */ |
| if (test_bit(__IXGBE_DOWN, &adapter->state) || |
| test_bit(__IXGBE_REMOVING, &adapter->state) || |
| test_bit(__IXGBE_RESETTING, &adapter->state)) |
| return; |
| |
| /* Force detection of hung controller */ |
| if (netif_carrier_ok(adapter->netdev)) { |
| for (i = 0; i < adapter->num_tx_queues; i++) |
| set_check_for_tx_hang(adapter->tx_ring[i]); |
| } |
| |
| if (!(adapter->flags & IXGBE_FLAG_MSIX_ENABLED)) { |
| /* |
| * for legacy and MSI interrupts don't set any bits |
| * that are enabled for EIAM, because this operation |
| * would set *both* EIMS and EICS for any bit in EIAM |
| */ |
| IXGBE_WRITE_REG(hw, IXGBE_EICS, |
| (IXGBE_EICS_TCP_TIMER | IXGBE_EICS_OTHER)); |
| } else { |
| /* get one bit for every active tx/rx interrupt vector */ |
| for (i = 0; i < adapter->num_q_vectors; i++) { |
| struct ixgbe_q_vector *qv = adapter->q_vector[i]; |
| if (qv->rx.ring || qv->tx.ring) |
| eics |= ((u64)1 << i); |
| } |
| } |
| |
| /* Cause software interrupt to ensure rings are cleaned */ |
| ixgbe_irq_rearm_queues(adapter, eics); |
| } |
| |
| /** |
| * ixgbe_watchdog_update_link - update the link status |
| * @adapter: pointer to the device adapter structure |
| * @link_speed: pointer to a u32 to store the link_speed |
| **/ |
| static void ixgbe_watchdog_update_link(struct ixgbe_adapter *adapter) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| u32 link_speed = adapter->link_speed; |
| bool link_up = adapter->link_up; |
| bool pfc_en = adapter->dcb_cfg.pfc_mode_enable; |
| |
| if (!(adapter->flags & IXGBE_FLAG_NEED_LINK_UPDATE)) |
| return; |
| |
| if (hw->mac.ops.check_link) { |
| hw->mac.ops.check_link(hw, &link_speed, &link_up, false); |
| } else { |
| /* always assume link is up, if no check link function */ |
| link_speed = IXGBE_LINK_SPEED_10GB_FULL; |
| link_up = true; |
| } |
| |
| if (adapter->ixgbe_ieee_pfc) |
| pfc_en |= !!(adapter->ixgbe_ieee_pfc->pfc_en); |
| |
| if (link_up && !((adapter->flags & IXGBE_FLAG_DCB_ENABLED) && pfc_en)) { |
| hw->mac.ops.fc_enable(hw); |
| ixgbe_set_rx_drop_en(adapter); |
| } |
| |
| if (link_up || |
| time_after(jiffies, (adapter->link_check_timeout + |
| IXGBE_TRY_LINK_TIMEOUT))) { |
| adapter->flags &= ~IXGBE_FLAG_NEED_LINK_UPDATE; |
| IXGBE_WRITE_REG(hw, IXGBE_EIMS, IXGBE_EIMC_LSC); |
| IXGBE_WRITE_FLUSH(hw); |
| } |
| |
| adapter->link_up = link_up; |
| adapter->link_speed = link_speed; |
| } |
| |
| static void ixgbe_update_default_up(struct ixgbe_adapter *adapter) |
| { |
| #ifdef CONFIG_IXGBE_DCB |
| struct net_device *netdev = adapter->netdev; |
| struct dcb_app app = { |
| .selector = IEEE_8021QAZ_APP_SEL_ETHERTYPE, |
| .protocol = 0, |
| }; |
| u8 up = 0; |
| |
| if (adapter->dcbx_cap & DCB_CAP_DCBX_VER_IEEE) |
| up = dcb_ieee_getapp_mask(netdev, &app); |
| |
| adapter->default_up = (up > 1) ? (ffs(up) - 1) : 0; |
| #endif |
| } |
| |
| /** |
| * ixgbe_watchdog_link_is_up - update netif_carrier status and |
| * print link up message |
| * @adapter: pointer to the device adapter structure |
| **/ |
| static void ixgbe_watchdog_link_is_up(struct ixgbe_adapter *adapter) |
| { |
| struct net_device *netdev = adapter->netdev; |
| struct ixgbe_hw *hw = &adapter->hw; |
| struct net_device *upper; |
| struct list_head *iter; |
| u32 link_speed = adapter->link_speed; |
| const char *speed_str; |
| bool flow_rx, flow_tx; |
| |
| /* only continue if link was previously down */ |
| if (netif_carrier_ok(netdev)) |
| return; |
| |
| adapter->flags2 &= ~IXGBE_FLAG2_SEARCH_FOR_SFP; |
| |
| switch (hw->mac.type) { |
| case ixgbe_mac_82598EB: { |
| u32 frctl = IXGBE_READ_REG(hw, IXGBE_FCTRL); |
| u32 rmcs = IXGBE_READ_REG(hw, IXGBE_RMCS); |
| flow_rx = !!(frctl & IXGBE_FCTRL_RFCE); |
| flow_tx = !!(rmcs & IXGBE_RMCS_TFCE_802_3X); |
| } |
| break; |
| case ixgbe_mac_X540: |
| case ixgbe_mac_X550: |
| case ixgbe_mac_X550EM_x: |
| case ixgbe_mac_82599EB: { |
| u32 mflcn = IXGBE_READ_REG(hw, IXGBE_MFLCN); |
| u32 fccfg = IXGBE_READ_REG(hw, IXGBE_FCCFG); |
| flow_rx = !!(mflcn & IXGBE_MFLCN_RFCE); |
| flow_tx = !!(fccfg & IXGBE_FCCFG_TFCE_802_3X); |
| } |
| break; |
| default: |
| flow_tx = false; |
| flow_rx = false; |
| break; |
| } |
| |
| adapter->last_rx_ptp_check = jiffies; |
| |
| if (test_bit(__IXGBE_PTP_RUNNING, &adapter->state)) |
| ixgbe_ptp_start_cyclecounter(adapter); |
| |
| switch (link_speed) { |
| case IXGBE_LINK_SPEED_10GB_FULL: |
| speed_str = "10 Gbps"; |
| break; |
| case IXGBE_LINK_SPEED_2_5GB_FULL: |
| speed_str = "2.5 Gbps"; |
| break; |
| case IXGBE_LINK_SPEED_1GB_FULL: |
| speed_str = "1 Gbps"; |
| break; |
| case IXGBE_LINK_SPEED_100_FULL: |
| speed_str = "100 Mbps"; |
| break; |
| default: |
| speed_str = "unknown speed"; |
| break; |
| } |
| e_info(drv, "NIC Link is Up %s, Flow Control: %s\n", speed_str, |
| ((flow_rx && flow_tx) ? "RX/TX" : |
| (flow_rx ? "RX" : |
| (flow_tx ? "TX" : "None")))); |
| |
| netif_carrier_on(netdev); |
| ixgbe_check_vf_rate_limit(adapter); |
| |
| /* enable transmits */ |
| netif_tx_wake_all_queues(adapter->netdev); |
| |
| /* enable any upper devices */ |
| rtnl_lock(); |
| netdev_for_each_all_upper_dev_rcu(adapter->netdev, upper, iter) { |
| if (netif_is_macvlan(upper)) { |
| struct macvlan_dev *vlan = netdev_priv(upper); |
| |
| if (vlan->fwd_priv) |
| netif_tx_wake_all_queues(upper); |
| } |
| } |
| rtnl_unlock(); |
| |
| /* update the default user priority for VFs */ |
| ixgbe_update_default_up(adapter); |
| |
| /* ping all the active vfs to let them know link has changed */ |
| ixgbe_ping_all_vfs(adapter); |
| } |
| |
| /** |
| * ixgbe_watchdog_link_is_down - update netif_carrier status and |
| * print link down message |
| * @adapter: pointer to the adapter structure |
| **/ |
| static void ixgbe_watchdog_link_is_down(struct ixgbe_adapter *adapter) |
| { |
| struct net_device *netdev = adapter->netdev; |
| struct ixgbe_hw *hw = &adapter->hw; |
| |
| adapter->link_up = false; |
| adapter->link_speed = 0; |
| |
| /* only continue if link was up previously */ |
| if (!netif_carrier_ok(netdev)) |
| return; |
| |
| /* poll for SFP+ cable when link is down */ |
| if (ixgbe_is_sfp(hw) && hw->mac.type == ixgbe_mac_82598EB) |
| adapter->flags2 |= IXGBE_FLAG2_SEARCH_FOR_SFP; |
| |
| if (test_bit(__IXGBE_PTP_RUNNING, &adapter->state)) |
| ixgbe_ptp_start_cyclecounter(adapter); |
| |
| e_info(drv, "NIC Link is Down\n"); |
| netif_carrier_off(netdev); |
| |
| /* ping all the active vfs to let them know link has changed */ |
| ixgbe_ping_all_vfs(adapter); |
| } |
| |
| static bool ixgbe_ring_tx_pending(struct ixgbe_adapter *adapter) |
| { |
| int i; |
| |
| for (i = 0; i < adapter->num_tx_queues; i++) { |
| struct ixgbe_ring *tx_ring = adapter->tx_ring[i]; |
| |
| if (tx_ring->next_to_use != tx_ring->next_to_clean) |
| return true; |
| } |
| |
| return false; |
| } |
| |
| static bool ixgbe_vf_tx_pending(struct ixgbe_adapter *adapter) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| struct ixgbe_ring_feature *vmdq = &adapter->ring_feature[RING_F_VMDQ]; |
| u32 q_per_pool = __ALIGN_MASK(1, ~vmdq->mask); |
| |
| int i, j; |
| |
| if (!adapter->num_vfs) |
| return false; |
| |
| /* resetting the PF is only needed for MAC before X550 */ |
| if (hw->mac.type >= ixgbe_mac_X550) |
| return false; |
| |
| for (i = 0; i < adapter->num_vfs; i++) { |
| for (j = 0; j < q_per_pool; j++) { |
| u32 h, t; |
| |
| h = IXGBE_READ_REG(hw, IXGBE_PVFTDHN(q_per_pool, i, j)); |
| t = IXGBE_READ_REG(hw, IXGBE_PVFTDTN(q_per_pool, i, j)); |
| |
| if (h != t) |
| return true; |
| } |
| } |
| |
| return false; |
| } |
| |
| /** |
| * ixgbe_watchdog_flush_tx - flush queues on link down |
| * @adapter: pointer to the device adapter structure |
| **/ |
| static void ixgbe_watchdog_flush_tx(struct ixgbe_adapter *adapter) |
| { |
| if (!netif_carrier_ok(adapter->netdev)) { |
| if (ixgbe_ring_tx_pending(adapter) || |
| ixgbe_vf_tx_pending(adapter)) { |
| /* We've lost link, so the controller stops DMA, |
| * but we've got queued Tx work that's never going |
| * to get done, so reset controller to flush Tx. |
| * (Do the reset outside of interrupt context). |
| */ |
| e_warn(drv, "initiating reset to clear Tx work after link loss\n"); |
| adapter->flags2 |= IXGBE_FLAG2_RESET_REQUESTED; |
| } |
| } |
| } |
| |
| #ifdef CONFIG_PCI_IOV |
| static inline void ixgbe_issue_vf_flr(struct ixgbe_adapter *adapter, |
| struct pci_dev *vfdev) |
| { |
| if (!pci_wait_for_pending_transaction(vfdev)) |
| e_dev_warn("Issuing VFLR with pending transactions\n"); |
| |
| e_dev_err("Issuing VFLR for VF %s\n", pci_name(vfdev)); |
| pcie_capability_set_word(vfdev, PCI_EXP_DEVCTL, PCI_EXP_DEVCTL_BCR_FLR); |
| |
| msleep(100); |
| } |
| |
| static void ixgbe_check_for_bad_vf(struct ixgbe_adapter *adapter) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| struct pci_dev *pdev = adapter->pdev; |
| unsigned int vf; |
| u32 gpc; |
| |
| if (!(netif_carrier_ok(adapter->netdev))) |
| return; |
| |
| gpc = IXGBE_READ_REG(hw, IXGBE_TXDGPC); |
| if (gpc) /* If incrementing then no need for the check below */ |
| return; |
| /* Check to see if a bad DMA write target from an errant or |
| * malicious VF has caused a PCIe error. If so then we can |
| * issue a VFLR to the offending VF(s) and then resume without |
| * requesting a full slot reset. |
| */ |
| |
| if (!pdev) |
| return; |
| |
| /* check status reg for all VFs owned by this PF */ |
| for (vf = 0; vf < adapter->num_vfs; ++vf) { |
| struct pci_dev *vfdev = adapter->vfinfo[vf].vfdev; |
| u16 status_reg; |
| |
| if (!vfdev) |
| continue; |
| pci_read_config_word(vfdev, PCI_STATUS, &status_reg); |
| if (status_reg != IXGBE_FAILED_READ_CFG_WORD && |
| status_reg & PCI_STATUS_REC_MASTER_ABORT) |
| ixgbe_issue_vf_flr(adapter, vfdev); |
| } |
| } |
| |
| static void ixgbe_spoof_check(struct ixgbe_adapter *adapter) |
| { |
| u32 ssvpc; |
| |
| /* Do not perform spoof check for 82598 or if not in IOV mode */ |
| if (adapter->hw.mac.type == ixgbe_mac_82598EB || |
| adapter->num_vfs == 0) |
| return; |
| |
| ssvpc = IXGBE_READ_REG(&adapter->hw, IXGBE_SSVPC); |
| |
| /* |
| * ssvpc register is cleared on read, if zero then no |
| * spoofed packets in the last interval. |
| */ |
| if (!ssvpc) |
| return; |
| |
| e_warn(drv, "%u Spoofed packets detected\n", ssvpc); |
| } |
| #else |
| static void ixgbe_spoof_check(struct ixgbe_adapter __always_unused *adapter) |
| { |
| } |
| |
| static void |
| ixgbe_check_for_bad_vf(struct ixgbe_adapter __always_unused *adapter) |
| { |
| } |
| #endif /* CONFIG_PCI_IOV */ |
| |
| |
| /** |
| * ixgbe_watchdog_subtask - check and bring link up |
| * @adapter: pointer to the device adapter structure |
| **/ |
| static void ixgbe_watchdog_subtask(struct ixgbe_adapter *adapter) |
| { |
| /* if interface is down, removing or resetting, do nothing */ |
| if (test_bit(__IXGBE_DOWN, &adapter->state) || |
| test_bit(__IXGBE_REMOVING, &adapter->state) || |
| test_bit(__IXGBE_RESETTING, &adapter->state)) |
| return; |
| |
| ixgbe_watchdog_update_link(adapter); |
| |
| if (adapter->link_up) |
| ixgbe_watchdog_link_is_up(adapter); |
| else |
| ixgbe_watchdog_link_is_down(adapter); |
| |
| ixgbe_check_for_bad_vf(adapter); |
| ixgbe_spoof_check(adapter); |
| ixgbe_update_stats(adapter); |
| |
| ixgbe_watchdog_flush_tx(adapter); |
| } |
| |
| /** |
| * ixgbe_sfp_detection_subtask - poll for SFP+ cable |
| * @adapter: the ixgbe adapter structure |
| **/ |
| static void ixgbe_sfp_detection_subtask(struct ixgbe_adapter *adapter) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| s32 err; |
| |
| /* not searching for SFP so there is nothing to do here */ |
| if (!(adapter->flags2 & IXGBE_FLAG2_SEARCH_FOR_SFP) && |
| !(adapter->flags2 & IXGBE_FLAG2_SFP_NEEDS_RESET)) |
| return; |
| |
| if (adapter->sfp_poll_time && |
| time_after(adapter->sfp_poll_time, jiffies)) |
| return; /* If not yet time to poll for SFP */ |
| |
| /* someone else is in init, wait until next service event */ |
| if (test_and_set_bit(__IXGBE_IN_SFP_INIT, &adapter->state)) |
| return; |
| |
| adapter->sfp_poll_time = jiffies + IXGBE_SFP_POLL_JIFFIES - 1; |
| |
| err = hw->phy.ops.identify_sfp(hw); |
| if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) |
| goto sfp_out; |
| |
| if (err == IXGBE_ERR_SFP_NOT_PRESENT) { |
| /* If no cable is present, then we need to reset |
| * the next time we find a good cable. */ |
| adapter->flags2 |= IXGBE_FLAG2_SFP_NEEDS_RESET; |
| } |
| |
| /* exit on error */ |
| if (err) |
| goto sfp_out; |
| |
| /* exit if reset not needed */ |
| if (!(adapter->flags2 & IXGBE_FLAG2_SFP_NEEDS_RESET)) |
| goto sfp_out; |
| |
| adapter->flags2 &= ~IXGBE_FLAG2_SFP_NEEDS_RESET; |
| |
| /* |
| * A module may be identified correctly, but the EEPROM may not have |
| * support for that module. setup_sfp() will fail in that case, so |
| * we should not allow that module to load. |
| */ |
| if (hw->mac.type == ixgbe_mac_82598EB) |
| err = hw->phy.ops.reset(hw); |
| else |
| err = hw->mac.ops.setup_sfp(hw); |
| |
| if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) |
| goto sfp_out; |
| |
| adapter->flags |= IXGBE_FLAG_NEED_LINK_CONFIG; |
| e_info(probe, "detected SFP+: %d\n", hw->phy.sfp_type); |
| |
| sfp_out: |
| clear_bit(__IXGBE_IN_SFP_INIT, &adapter->state); |
| |
| if ((err == IXGBE_ERR_SFP_NOT_SUPPORTED) && |
| (adapter->netdev->reg_state == NETREG_REGISTERED)) { |
| e_dev_err("failed to initialize because an unsupported " |
| "SFP+ module type was detected.\n"); |
| e_dev_err("Reload the driver after installing a " |
| "supported module.\n"); |
| unregister_netdev(adapter->netdev); |
| } |
| } |
| |
| /** |
| * ixgbe_sfp_link_config_subtask - set up link SFP after module install |
| * @adapter: the ixgbe adapter structure |
| **/ |
| static void ixgbe_sfp_link_config_subtask(struct ixgbe_adapter *adapter) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| u32 speed; |
| bool autoneg = false; |
| |
| if (!(adapter->flags & IXGBE_FLAG_NEED_LINK_CONFIG)) |
| return; |
| |
| /* someone else is in init, wait until next service event */ |
| if (test_and_set_bit(__IXGBE_IN_SFP_INIT, &adapter->state)) |
| return; |
| |
| adapter->flags &= ~IXGBE_FLAG_NEED_LINK_CONFIG; |
| |
| speed = hw->phy.autoneg_advertised; |
| if ((!speed) && (hw->mac.ops.get_link_capabilities)) { |
| hw->mac.ops.get_link_capabilities(hw, &speed, &autoneg); |
| |
| /* setup the highest link when no autoneg */ |
| if (!autoneg) { |
| if (speed & IXGBE_LINK_SPEED_10GB_FULL) |
| speed = IXGBE_LINK_SPEED_10GB_FULL; |
| } |
| } |
| |
| if (hw->mac.ops.setup_link) |
| hw->mac.ops.setup_link(hw, speed, true); |
| |
| adapter->flags |= IXGBE_FLAG_NEED_LINK_UPDATE; |
| adapter->link_check_timeout = jiffies; |
| clear_bit(__IXGBE_IN_SFP_INIT, &adapter->state); |
| } |
| |
| /** |
| * ixgbe_service_timer - Timer Call-back |
| * @data: pointer to adapter cast into an unsigned long |
| **/ |
| static void ixgbe_service_timer(unsigned long data) |
| { |
| struct ixgbe_adapter *adapter = (struct ixgbe_adapter *)data; |
| unsigned long next_event_offset; |
| |
| /* poll faster when waiting for link */ |
| if (adapter->flags & IXGBE_FLAG_NEED_LINK_UPDATE) |
| next_event_offset = HZ / 10; |
| else |
| next_event_offset = HZ * 2; |
| |
| /* Reset the timer */ |
| mod_timer(&adapter->service_timer, next_event_offset + jiffies); |
| |
| ixgbe_service_event_schedule(adapter); |
| } |
| |
| static void ixgbe_phy_interrupt_subtask(struct ixgbe_adapter *adapter) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| u32 status; |
| |
| if (!(adapter->flags2 & IXGBE_FLAG2_PHY_INTERRUPT)) |
| return; |
| |
| adapter->flags2 &= ~IXGBE_FLAG2_PHY_INTERRUPT; |
| |
| if (!hw->phy.ops.handle_lasi) |
| return; |
| |
| status = hw->phy.ops.handle_lasi(&adapter->hw); |
| if (status != IXGBE_ERR_OVERTEMP) |
| return; |
| |
| e_crit(drv, "%s\n", ixgbe_overheat_msg); |
| } |
| |
| static void ixgbe_reset_subtask(struct ixgbe_adapter *adapter) |
| { |
| if (!(adapter->flags2 & IXGBE_FLAG2_RESET_REQUESTED)) |
| return; |
| |
| adapter->flags2 &= ~IXGBE_FLAG2_RESET_REQUESTED; |
| |
| /* If we're already down, removing or resetting, just bail */ |
| if (test_bit(__IXGBE_DOWN, &adapter->state) || |
| test_bit(__IXGBE_REMOVING, &adapter->state) || |
| test_bit(__IXGBE_RESETTING, &adapter->state)) |
| return; |
| |
| ixgbe_dump(adapter); |
| netdev_err(adapter->netdev, "Reset adapter\n"); |
| adapter->tx_timeout_count++; |
| |
| rtnl_lock(); |
| ixgbe_reinit_locked(adapter); |
| rtnl_unlock(); |
| } |
| |
| /** |
| * ixgbe_service_task - manages and runs subtasks |
| * @work: pointer to work_struct containing our data |
| **/ |
| static void ixgbe_service_task(struct work_struct *work) |
| { |
| struct ixgbe_adapter *adapter = container_of(work, |
| struct ixgbe_adapter, |
| service_task); |
| if (ixgbe_removed(adapter->hw.hw_addr)) { |
| if (!test_bit(__IXGBE_DOWN, &adapter->state)) { |
| rtnl_lock(); |
| ixgbe_down(adapter); |
| rtnl_unlock(); |
| } |
| ixgbe_service_event_complete(adapter); |
| return; |
| } |
| #ifdef CONFIG_IXGBE_VXLAN |
| if (adapter->flags2 & IXGBE_FLAG2_VXLAN_REREG_NEEDED) { |
| adapter->flags2 &= ~IXGBE_FLAG2_VXLAN_REREG_NEEDED; |
| vxlan_get_rx_port(adapter->netdev); |
| } |
| #endif /* CONFIG_IXGBE_VXLAN */ |
| ixgbe_reset_subtask(adapter); |
| ixgbe_phy_interrupt_subtask(adapter); |
| ixgbe_sfp_detection_subtask(adapter); |
| ixgbe_sfp_link_config_subtask(adapter); |
| ixgbe_check_overtemp_subtask(adapter); |
| ixgbe_watchdog_subtask(adapter); |
| ixgbe_fdir_reinit_subtask(adapter); |
| ixgbe_check_hang_subtask(adapter); |
| |
| if (test_bit(__IXGBE_PTP_RUNNING, &adapter->state)) { |
| ixgbe_ptp_overflow_check(adapter); |
| ixgbe_ptp_rx_hang(adapter); |
| } |
| |
| ixgbe_service_event_complete(adapter); |
| } |
| |
| static int ixgbe_tso(struct ixgbe_ring *tx_ring, |
| struct ixgbe_tx_buffer *first, |
| u8 *hdr_len) |
| { |
| struct sk_buff *skb = first->skb; |
| u32 vlan_macip_lens, type_tucmd; |
| u32 mss_l4len_idx, l4len; |
| int err; |
| |
| if (skb->ip_summed != CHECKSUM_PARTIAL) |
| return 0; |
| |
| if (!skb_is_gso(skb)) |
| return 0; |
| |
| err = skb_cow_head(skb, 0); |
| if (err < 0) |
| return err; |
| |
| /* ADV DTYP TUCMD MKRLOC/ISCSIHEDLEN */ |
| type_tucmd = IXGBE_ADVTXD_TUCMD_L4T_TCP; |
| |
| if (first->protocol == htons(ETH_P_IP)) { |
| struct iphdr *iph = ip_hdr(skb); |
| iph->tot_len = 0; |
| iph->check = 0; |
| tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr, |
| iph->daddr, 0, |
| IPPROTO_TCP, |
| 0); |
| type_tucmd |= IXGBE_ADVTXD_TUCMD_IPV4; |
| first->tx_flags |= IXGBE_TX_FLAGS_TSO | |
| IXGBE_TX_FLAGS_CSUM | |
| IXGBE_TX_FLAGS_IPV4; |
| } else if (skb_is_gso_v6(skb)) { |
| ipv6_hdr(skb)->payload_len = 0; |
| tcp_hdr(skb)->check = |
| ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr, |
| &ipv6_hdr(skb)->daddr, |
| 0, IPPROTO_TCP, 0); |
| first->tx_flags |= IXGBE_TX_FLAGS_TSO | |
| IXGBE_TX_FLAGS_CSUM; |
| } |
| |
| /* compute header lengths */ |
| l4len = tcp_hdrlen(skb); |
| *hdr_len = skb_transport_offset(skb) + l4len; |
| |
| /* update gso size and bytecount with header size */ |
| first->gso_segs = skb_shinfo(skb)->gso_segs; |
| first->bytecount += (first->gso_segs - 1) * *hdr_len; |
| |
| /* mss_l4len_id: use 0 as index for TSO */ |
| mss_l4len_idx = l4len << IXGBE_ADVTXD_L4LEN_SHIFT; |
| mss_l4len_idx |= skb_shinfo(skb)->gso_size << IXGBE_ADVTXD_MSS_SHIFT; |
| |
| /* vlan_macip_lens: HEADLEN, MACLEN, VLAN tag */ |
| vlan_macip_lens = skb_network_header_len(skb); |
| vlan_macip_lens |= skb_network_offset(skb) << IXGBE_ADVTXD_MACLEN_SHIFT; |
| vlan_macip_lens |= first->tx_flags & IXGBE_TX_FLAGS_VLAN_MASK; |
| |
| ixgbe_tx_ctxtdesc(tx_ring, vlan_macip_lens, 0, type_tucmd, |
| mss_l4len_idx); |
| |
| return 1; |
| } |
| |
| static void ixgbe_tx_csum(struct ixgbe_ring *tx_ring, |
| struct ixgbe_tx_buffer *first) |
| { |
| struct sk_buff *skb = first->skb; |
| u32 vlan_macip_lens = 0; |
| u32 mss_l4len_idx = 0; |
| u32 type_tucmd = 0; |
| |
| if (skb->ip_summed != CHECKSUM_PARTIAL) { |
| if (!(first->tx_flags & IXGBE_TX_FLAGS_HW_VLAN) && |
| !(first->tx_flags & IXGBE_TX_FLAGS_CC)) |
| return; |
| vlan_macip_lens = skb_network_offset(skb) << |
| IXGBE_ADVTXD_MACLEN_SHIFT; |
| } else { |
| u8 l4_hdr = 0; |
| union { |
| struct iphdr *ipv4; |
| struct ipv6hdr *ipv6; |
| u8 *raw; |
| } network_hdr; |
| union { |
| struct tcphdr *tcphdr; |
| u8 *raw; |
| } transport_hdr; |
| __be16 frag_off; |
| |
| if (skb->encapsulation) { |
| network_hdr.raw = skb_inner_network_header(skb); |
| transport_hdr.raw = skb_inner_transport_header(skb); |
| vlan_macip_lens = skb_inner_network_offset(skb) << |
| IXGBE_ADVTXD_MACLEN_SHIFT; |
| } else { |
| network_hdr.raw = skb_network_header(skb); |
| transport_hdr.raw = skb_transport_header(skb); |
| vlan_macip_lens = skb_network_offset(skb) << |
| IXGBE_ADVTXD_MACLEN_SHIFT; |
| } |
| |
| /* use first 4 bits to determine IP version */ |
| switch (network_hdr.ipv4->version) { |
| case IPVERSION: |
| vlan_macip_lens |= transport_hdr.raw - network_hdr.raw; |
| type_tucmd |= IXGBE_ADVTXD_TUCMD_IPV4; |
| l4_hdr = network_hdr.ipv4->protocol; |
| break; |
| case 6: |
| vlan_macip_lens |= transport_hdr.raw - network_hdr.raw; |
| l4_hdr = network_hdr.ipv6->nexthdr; |
| if (likely((transport_hdr.raw - network_hdr.raw) == |
| sizeof(struct ipv6hdr))) |
| break; |
| ipv6_skip_exthdr(skb, network_hdr.raw - skb->data + |
| sizeof(struct ipv6hdr), |
| &l4_hdr, &frag_off); |
| if (unlikely(frag_off)) |
| l4_hdr = NEXTHDR_FRAGMENT; |
| break; |
| default: |
| break; |
| } |
| |
| switch (l4_hdr) { |
| case IPPROTO_TCP: |
| type_tucmd |= IXGBE_ADVTXD_TUCMD_L4T_TCP; |
| mss_l4len_idx = (transport_hdr.tcphdr->doff * 4) << |
| IXGBE_ADVTXD_L4LEN_SHIFT; |
| break; |
| case IPPROTO_SCTP: |
| type_tucmd |= IXGBE_ADVTXD_TUCMD_L4T_SCTP; |
| mss_l4len_idx = sizeof(struct sctphdr) << |
| IXGBE_ADVTXD_L4LEN_SHIFT; |
| break; |
| case IPPROTO_UDP: |
| mss_l4len_idx = sizeof(struct udphdr) << |
| IXGBE_ADVTXD_L4LEN_SHIFT; |
| break; |
| default: |
| if (unlikely(net_ratelimit())) { |
| dev_warn(tx_ring->dev, |
| "partial checksum, version=%d, l4 proto=%x\n", |
| network_hdr.ipv4->version, l4_hdr); |
| } |
| skb_checksum_help(skb); |
| goto no_csum; |
| } |
| |
| /* update TX checksum flag */ |
| first->tx_flags |= IXGBE_TX_FLAGS_CSUM; |
| } |
| |
| no_csum: |
| /* vlan_macip_lens: MACLEN, VLAN tag */ |
| vlan_macip_lens |= first->tx_flags & IXGBE_TX_FLAGS_VLAN_MASK; |
| |
| ixgbe_tx_ctxtdesc(tx_ring, vlan_macip_lens, 0, |
| type_tucmd, mss_l4len_idx); |
| } |
| |
| #define IXGBE_SET_FLAG(_input, _flag, _result) \ |
| ((_flag <= _result) ? \ |
| ((u32)(_input & _flag) * (_result / _flag)) : \ |
| ((u32)(_input & _flag) / (_flag / _result))) |
| |
| static u32 ixgbe_tx_cmd_type(struct sk_buff *skb, u32 tx_flags) |
| { |
| /* set type for advanced descriptor with frame checksum insertion */ |
| u32 cmd_type = IXGBE_ADVTXD_DTYP_DATA | |
| IXGBE_ADVTXD_DCMD_DEXT | |
| IXGBE_ADVTXD_DCMD_IFCS; |
| |
| /* set HW vlan bit if vlan is present */ |
| cmd_type |= IXGBE_SET_FLAG(tx_flags, IXGBE_TX_FLAGS_HW_VLAN, |
| IXGBE_ADVTXD_DCMD_VLE); |
| |
| /* set segmentation enable bits for TSO/FSO */ |
| cmd_type |= IXGBE_SET_FLAG(tx_flags, IXGBE_TX_FLAGS_TSO, |
| IXGBE_ADVTXD_DCMD_TSE); |
| |
| /* set timestamp bit if present */ |
| cmd_type |= IXGBE_SET_FLAG(tx_flags, IXGBE_TX_FLAGS_TSTAMP, |
| IXGBE_ADVTXD_MAC_TSTAMP); |
| |
| /* insert frame checksum */ |
| cmd_type ^= IXGBE_SET_FLAG(skb->no_fcs, 1, IXGBE_ADVTXD_DCMD_IFCS); |
| |
| return cmd_type; |
| } |
| |
| static void ixgbe_tx_olinfo_status(union ixgbe_adv_tx_desc *tx_desc, |
| u32 tx_flags, unsigned int paylen) |
| { |
| u32 olinfo_status = paylen << IXGBE_ADVTXD_PAYLEN_SHIFT; |
| |
| /* enable L4 checksum for TSO and TX checksum offload */ |
| olinfo_status |= IXGBE_SET_FLAG(tx_flags, |
| IXGBE_TX_FLAGS_CSUM, |
| IXGBE_ADVTXD_POPTS_TXSM); |
| |
| /* enble IPv4 checksum for TSO */ |
| olinfo_status |= IXGBE_SET_FLAG(tx_flags, |
| IXGBE_TX_FLAGS_IPV4, |
| IXGBE_ADVTXD_POPTS_IXSM); |
| |
| /* |
| * Check Context must be set if Tx switch is enabled, which it |
| * always is for case where virtual functions are running |
| */ |
| olinfo_status |= IXGBE_SET_FLAG(tx_flags, |
| IXGBE_TX_FLAGS_CC, |
| IXGBE_ADVTXD_CC); |
| |
| tx_desc->read.olinfo_status = cpu_to_le32(olinfo_status); |
| } |
| |
| static int __ixgbe_maybe_stop_tx(struct ixgbe_ring *tx_ring, u16 size) |
| { |
| netif_stop_subqueue(tx_ring->netdev, tx_ring->queue_index); |
| |
| /* Herbert's original patch had: |
| * smp_mb__after_netif_stop_queue(); |
| * but since that doesn't exist yet, just open code it. |
| */ |
| smp_mb(); |
| |
| /* We need to check again in a case another CPU has just |
| * made room available. |
| */ |
| if (likely(ixgbe_desc_unused(tx_ring) < size)) |
| return -EBUSY; |
| |
| /* A reprieve! - use start_queue because it doesn't call schedule */ |
| netif_start_subqueue(tx_ring->netdev, tx_ring->queue_index); |
| ++tx_ring->tx_stats.restart_queue; |
| return 0; |
| } |
| |
| static inline int ixgbe_maybe_stop_tx(struct ixgbe_ring *tx_ring, u16 size) |
| { |
| if (likely(ixgbe_desc_unused(tx_ring) >= size)) |
| return 0; |
| |
| return __ixgbe_maybe_stop_tx(tx_ring, size); |
| } |
| |
| #define IXGBE_TXD_CMD (IXGBE_TXD_CMD_EOP | \ |
| IXGBE_TXD_CMD_RS) |
| |
| static void ixgbe_tx_map(struct ixgbe_ring *tx_ring, |
| struct ixgbe_tx_buffer *first, |
| const u8 hdr_len) |
| { |
| struct sk_buff *skb = first->skb; |
| struct ixgbe_tx_buffer *tx_buffer; |
| union ixgbe_adv_tx_desc *tx_desc; |
| struct skb_frag_struct *frag; |
| dma_addr_t dma; |
| unsigned int data_len, size; |
| u32 tx_flags = first->tx_flags; |
| u32 cmd_type = ixgbe_tx_cmd_type(skb, tx_flags); |
| u16 i = tx_ring->next_to_use; |
| |
| tx_desc = IXGBE_TX_DESC(tx_ring, i); |
| |
| ixgbe_tx_olinfo_status(tx_desc, tx_flags, skb->len - hdr_len); |
| |
| size = skb_headlen(skb); |
| data_len = skb->data_len; |
| |
| #ifdef IXGBE_FCOE |
| if (tx_flags & IXGBE_TX_FLAGS_FCOE) { |
| if (data_len < sizeof(struct fcoe_crc_eof)) { |
| size -= sizeof(struct fcoe_crc_eof) - data_len; |
| data_len = 0; |
| } else { |
| data_len -= sizeof(struct fcoe_crc_eof); |
| } |
| } |
| |
| #endif |
| dma = dma_map_single(tx_ring->dev, skb->data, size, DMA_TO_DEVICE); |
| |
| tx_buffer = first; |
| |
| for (frag = &skb_shinfo(skb)->frags[0];; frag++) { |
| if (dma_mapping_error(tx_ring->dev, dma)) |
| goto dma_error; |
| |
| /* record length, and DMA address */ |
| dma_unmap_len_set(tx_buffer, len, size); |
| dma_unmap_addr_set(tx_buffer, dma, dma); |
| |
| tx_desc->read.buffer_addr = cpu_to_le64(dma); |
| |
| while (unlikely(size > IXGBE_MAX_DATA_PER_TXD)) { |
| tx_desc->read.cmd_type_len = |
| cpu_to_le32(cmd_type ^ IXGBE_MAX_DATA_PER_TXD); |
| |
| i++; |
| tx_desc++; |
| if (i == tx_ring->count) { |
| tx_desc = IXGBE_TX_DESC(tx_ring, 0); |
| i = 0; |
| } |
| tx_desc->read.olinfo_status = 0; |
| |
| dma += IXGBE_MAX_DATA_PER_TXD; |
| size -= IXGBE_MAX_DATA_PER_TXD; |
| |
| tx_desc->read.buffer_addr = cpu_to_le64(dma); |
| } |
| |
| if (likely(!data_len)) |
| break; |
| |
| tx_desc->read.cmd_type_len = cpu_to_le32(cmd_type ^ size); |
| |
| i++; |
| tx_desc++; |
| if (i == tx_ring->count) { |
| tx_desc = IXGBE_TX_DESC(tx_ring, 0); |
| i = 0; |
| } |
| tx_desc->read.olinfo_status = 0; |
| |
| #ifdef IXGBE_FCOE |
| size = min_t(unsigned int, data_len, skb_frag_size(frag)); |
| #else |
| size = skb_frag_size(frag); |
| #endif |
| data_len -= size; |
| |
| dma = skb_frag_dma_map(tx_ring->dev, frag, 0, size, |
| DMA_TO_DEVICE); |
| |
| tx_buffer = &tx_ring->tx_buffer_info[i]; |
| } |
| |
| /* write last descriptor with RS and EOP bits */ |
| cmd_type |= size | IXGBE_TXD_CMD; |
| tx_desc->read.cmd_type_len = cpu_to_le32(cmd_type); |
| |
| netdev_tx_sent_queue(txring_txq(tx_ring), first->bytecount); |
| |
| /* set the timestamp */ |
| first->time_stamp = jiffies; |
| |
| /* |
| * Force memory writes to complete before letting h/w know there |
| * are new descriptors to fetch. (Only applicable for weak-ordered |
| * memory model archs, such as IA-64). |
| * |
| * We also need this memory barrier to make certain all of the |
| * status bits have been updated before next_to_watch is written. |
| */ |
| wmb(); |
| |
| /* set next_to_watch value indicating a packet is present */ |
| first->next_to_watch = tx_desc; |
| |
| i++; |
| if (i == tx_ring->count) |
| i = 0; |
| |
| tx_ring->next_to_use = i; |
| |
| ixgbe_maybe_stop_tx(tx_ring, DESC_NEEDED); |
| |
| if (netif_xmit_stopped(txring_txq(tx_ring)) || !skb->xmit_more) { |
| writel(i, tx_ring->tail); |
| |
| /* we need this if more than one processor can write to our tail |
| * at a time, it synchronizes IO on IA64/Altix systems |
| */ |
| mmiowb(); |
| } |
| |
| return; |
| dma_error: |
| dev_err(tx_ring->dev, "TX DMA map failed\n"); |
| |
| /* clear dma mappings for failed tx_buffer_info map */ |
| for (;;) { |
| tx_buffer = &tx_ring->tx_buffer_info[i]; |
| ixgbe_unmap_and_free_tx_resource(tx_ring, tx_buffer); |
| if (tx_buffer == first) |
| break; |
| if (i == 0) |
| i = tx_ring->count; |
| i--; |
| } |
| |
| tx_ring->next_to_use = i; |
| } |
| |
| static void ixgbe_atr(struct ixgbe_ring *ring, |
| struct ixgbe_tx_buffer *first) |
| { |
| struct ixgbe_q_vector *q_vector = ring->q_vector; |
| union ixgbe_atr_hash_dword input = { .dword = 0 }; |
| union ixgbe_atr_hash_dword common = { .dword = 0 }; |
| union { |
| unsigned char *network; |
| struct iphdr *ipv4; |
| struct ipv6hdr *ipv6; |
| } hdr; |
| struct tcphdr *th; |
| unsigned int hlen; |
| struct sk_buff *skb; |
| __be16 vlan_id; |
| int l4_proto; |
| |
| /* if ring doesn't have a interrupt vector, cannot perform ATR */ |
| if (!q_vector) |
| return; |
| |
| /* do nothing if sampling is disabled */ |
| if (!ring->atr_sample_rate) |
| return; |
| |
| ring->atr_count++; |
| |
| /* currently only IPv4/IPv6 with TCP is supported */ |
| if ((first->protocol != htons(ETH_P_IP)) && |
| (first->protocol != htons(ETH_P_IPV6))) |
| return; |
| |
| /* snag network header to get L4 type and address */ |
| skb = first->skb; |
| hdr.network = skb_network_header(skb); |
| #ifdef CONFIG_IXGBE_VXLAN |
| if (skb->encapsulation && |
| first->protocol == htons(ETH_P_IP) && |
| hdr.ipv4->protocol != IPPROTO_UDP) { |
| struct ixgbe_adapter *adapter = q_vector->adapter; |
| |
| /* verify the port is recognized as VXLAN */ |
| if (adapter->vxlan_port && |
| udp_hdr(skb)->dest == adapter->vxlan_port) |
| hdr.network = skb_inner_network_header(skb); |
| } |
| #endif /* CONFIG_IXGBE_VXLAN */ |
| |
| /* Currently only IPv4/IPv6 with TCP is supported */ |
| switch (hdr.ipv4->version) { |
| case IPVERSION: |
| /* access ihl as u8 to avoid unaligned access on ia64 */ |
| hlen = (hdr.network[0] & 0x0F) << 2; |
| l4_proto = hdr.ipv4->protocol; |
| break; |
| case 6: |
| hlen = hdr.network - skb->data; |
| l4_proto = ipv6_find_hdr(skb, &hlen, IPPROTO_TCP, NULL, NULL); |
| hlen -= hdr.network - skb->data; |
| break; |
| default: |
| return; |
| } |
| |
| if (l4_proto != IPPROTO_TCP) |
| return; |
| |
| th = (struct tcphdr *)(hdr.network + hlen); |
| |
| /* skip this packet since the socket is closing */ |
| if (th->fin) |
| return; |
| |
| /* sample on all syn packets or once every atr sample count */ |
| if (!th->syn && (ring->atr_count < ring->atr_sample_rate)) |
| return; |
| |
| /* reset sample count */ |
| ring->atr_count = 0; |
| |
| vlan_id = htons(first->tx_flags >> IXGBE_TX_FLAGS_VLAN_SHIFT); |
| |
| /* |
| * src and dst are inverted, think how the receiver sees them |
| * |
| * The input is broken into two sections, a non-compressed section |
| * containing vm_pool, vlan_id, and flow_type. The rest of the data |
| * is XORed together and stored in the compressed dword. |
| */ |
| input.formatted.vlan_id = vlan_id; |
| |
| /* |
| * since src port and flex bytes occupy the same word XOR them together |
| * and write the value to source port portion of compressed dword |
| */ |
| if (first->tx_flags & (IXGBE_TX_FLAGS_SW_VLAN | IXGBE_TX_FLAGS_HW_VLAN)) |
| common.port.src ^= th->dest ^ htons(ETH_P_8021Q); |
| else |
| common.port.src ^= th->dest ^ first->protocol; |
| common.port.dst ^= th->source; |
| |
| switch (hdr.ipv4->version) { |
| case IPVERSION: |
| input.formatted.flow_type = IXGBE_ATR_FLOW_TYPE_TCPV4; |
| common.ip ^= hdr.ipv4->saddr ^ hdr.ipv4->daddr; |
| break; |
| case 6: |
| input.formatted.flow_type = IXGBE_ATR_FLOW_TYPE_TCPV6; |
| common.ip ^= hdr.ipv6->saddr.s6_addr32[0] ^ |
| hdr.ipv6->saddr.s6_addr32[1] ^ |
| hdr.ipv6->saddr.s6_addr32[2] ^ |
| hdr.ipv6->saddr.s6_addr32[3] ^ |
| hdr.ipv6->daddr.s6_addr32[0] ^ |
| hdr.ipv6->daddr.s6_addr32[1] ^ |
| hdr.ipv6->daddr.s6_addr32[2] ^ |
| hdr.ipv6->daddr.s6_addr32[3]; |
| break; |
| default: |
| break; |
| } |
| |
| if (hdr.network != skb_network_header(skb)) |
| input.formatted.flow_type |= IXGBE_ATR_L4TYPE_TUNNEL_MASK; |
| |
| /* This assumes the Rx queue and Tx queue are bound to the same CPU */ |
| ixgbe_fdir_add_signature_filter_82599(&q_vector->adapter->hw, |
| input, common, ring->queue_index); |
| } |
| |
| static u16 ixgbe_select_queue(struct net_device *dev, struct sk_buff *skb, |
| void *accel_priv, select_queue_fallback_t fallback) |
| { |
| struct ixgbe_fwd_adapter *fwd_adapter = accel_priv; |
| #ifdef IXGBE_FCOE |
| struct ixgbe_adapter *adapter; |
| struct ixgbe_ring_feature *f; |
| int txq; |
| #endif |
| |
| if (fwd_adapter) |
| return skb->queue_mapping + fwd_adapter->tx_base_queue; |
| |
| #ifdef IXGBE_FCOE |
| |
| /* |
| * only execute the code below if protocol is FCoE |
| * or FIP and we have FCoE enabled on the adapter |
| */ |
| switch (vlan_get_protocol(skb)) { |
| case htons(ETH_P_FCOE): |
| case htons(ETH_P_FIP): |
| adapter = netdev_priv(dev); |
| |
| if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED) |
| break; |
| default: |
| return fallback(dev, skb); |
| } |
| |
| f = &adapter->ring_feature[RING_F_FCOE]; |
| |
| txq = skb_rx_queue_recorded(skb) ? skb_get_rx_queue(skb) : |
| smp_processor_id(); |
| |
| while (txq >= f->indices) |
| txq -= f->indices; |
| |
| return txq + f->offset; |
| #else |
| return fallback(dev, skb); |
| #endif |
| } |
| |
| netdev_tx_t ixgbe_xmit_frame_ring(struct sk_buff *skb, |
| struct ixgbe_adapter *adapter, |
| struct ixgbe_ring *tx_ring) |
| { |
| struct ixgbe_tx_buffer *first; |
| int tso; |
| u32 tx_flags = 0; |
| unsigned short f; |
| u16 count = TXD_USE_COUNT(skb_headlen(skb)); |
| __be16 protocol = skb->protocol; |
| u8 hdr_len = 0; |
| |
| /* |
| * need: 1 descriptor per page * PAGE_SIZE/IXGBE_MAX_DATA_PER_TXD, |
| * + 1 desc for skb_headlen/IXGBE_MAX_DATA_PER_TXD, |
| * + 2 desc gap to keep tail from touching head, |
| * + 1 desc for context descriptor, |
| * otherwise try next time |
| */ |
| for (f = 0; f < skb_shinfo(skb)->nr_frags; f++) |
| count += TXD_USE_COUNT(skb_shinfo(skb)->frags[f].size); |
| |
| if (ixgbe_maybe_stop_tx(tx_ring, count + 3)) { |
| tx_ring->tx_stats.tx_busy++; |
| return NETDEV_TX_BUSY; |
| } |
| |
| /* record the location of the first descriptor for this packet */ |
| first = &tx_ring->tx_buffer_info[tx_ring->next_to_use]; |
| first->skb = skb; |
| first->bytecount = skb->len; |
| first->gso_segs = 1; |
| |
| /* if we have a HW VLAN tag being added default to the HW one */ |
| if (skb_vlan_tag_present(skb)) { |
| tx_flags |= skb_vlan_tag_get(skb) << IXGBE_TX_FLAGS_VLAN_SHIFT; |
| tx_flags |= IXGBE_TX_FLAGS_HW_VLAN; |
| /* else if it is a SW VLAN check the next protocol and store the tag */ |
| } else if (protocol == htons(ETH_P_8021Q)) { |
| struct vlan_hdr *vhdr, _vhdr; |
| vhdr = skb_header_pointer(skb, ETH_HLEN, sizeof(_vhdr), &_vhdr); |
| if (!vhdr) |
| goto out_drop; |
| |
| tx_flags |= ntohs(vhdr->h_vlan_TCI) << |
| IXGBE_TX_FLAGS_VLAN_SHIFT; |
| tx_flags |= IXGBE_TX_FLAGS_SW_VLAN; |
| } |
| protocol = vlan_get_protocol(skb); |
| |
| if (unlikely(skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP) && |
| adapter->ptp_clock && |
| !test_and_set_bit_lock(__IXGBE_PTP_TX_IN_PROGRESS, |
| &adapter->state)) { |
| skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS; |
| tx_flags |= IXGBE_TX_FLAGS_TSTAMP; |
| |
| /* schedule check for Tx timestamp */ |
| adapter->ptp_tx_skb = skb_get(skb); |
| adapter->ptp_tx_start = jiffies; |
| schedule_work(&adapter->ptp_tx_work); |
| } |
| |
| skb_tx_timestamp(skb); |
| |
| #ifdef CONFIG_PCI_IOV |
| /* |
| * Use the l2switch_enable flag - would be false if the DMA |
| * Tx switch had been disabled. |
| */ |
| if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) |
| tx_flags |= IXGBE_TX_FLAGS_CC; |
| |
| #endif |
| /* DCB maps skb priorities 0-7 onto 3 bit PCP of VLAN tag. */ |
| if ((adapter->flags & IXGBE_FLAG_DCB_ENABLED) && |
| ((tx_flags & (IXGBE_TX_FLAGS_HW_VLAN | IXGBE_TX_FLAGS_SW_VLAN)) || |
| (skb->priority != TC_PRIO_CONTROL))) { |
| tx_flags &= ~IXGBE_TX_FLAGS_VLAN_PRIO_MASK; |
| tx_flags |= (skb->priority & 0x7) << |
| IXGBE_TX_FLAGS_VLAN_PRIO_SHIFT; |
| if (tx_flags & IXGBE_TX_FLAGS_SW_VLAN) { |
| struct vlan_ethhdr *vhdr; |
| |
| if (skb_cow_head(skb, 0)) |
| goto out_drop; |
| vhdr = (struct vlan_ethhdr *)skb->data; |
| vhdr->h_vlan_TCI = htons(tx_flags >> |
| IXGBE_TX_FLAGS_VLAN_SHIFT); |
| } else { |
| tx_flags |= IXGBE_TX_FLAGS_HW_VLAN; |
| } |
| } |
| |
| /* record initial flags and protocol */ |
| first->tx_flags = tx_flags; |
| first->protocol = protocol; |
| |
| #ifdef IXGBE_FCOE |
| /* setup tx offload for FCoE */ |
| if ((protocol == htons(ETH_P_FCOE)) && |
| (tx_ring->netdev->features & (NETIF_F_FSO | NETIF_F_FCOE_CRC))) { |
| tso = ixgbe_fso(tx_ring, first, &hdr_len); |
| if (tso < 0) |
| goto out_drop; |
| |
| goto xmit_fcoe; |
| } |
| |
| #endif /* IXGBE_FCOE */ |
| tso = ixgbe_tso(tx_ring, first, &hdr_len); |
| if (tso < 0) |
| goto out_drop; |
| else if (!tso) |
| ixgbe_tx_csum(tx_ring, first); |
| |
| /* add the ATR filter if ATR is on */ |
| if (test_bit(__IXGBE_TX_FDIR_INIT_DONE, &tx_ring->state)) |
| ixgbe_atr(tx_ring, first); |
| |
| #ifdef IXGBE_FCOE |
| xmit_fcoe: |
| #endif /* IXGBE_FCOE */ |
| ixgbe_tx_map(tx_ring, first, hdr_len); |
| |
| return NETDEV_TX_OK; |
| |
| out_drop: |
| dev_kfree_skb_any(first->skb); |
| first->skb = NULL; |
| |
| return NETDEV_TX_OK; |
| } |
| |
| static netdev_tx_t __ixgbe_xmit_frame(struct sk_buff *skb, |
| struct net_device *netdev, |
| struct ixgbe_ring *ring) |
| { |
| struct ixgbe_adapter *adapter = netdev_priv(netdev); |
| struct ixgbe_ring *tx_ring; |
| |
| /* |
| * The minimum packet size for olinfo paylen is 17 so pad the skb |
| * in order to meet this minimum size requirement. |
| */ |
| if (skb_put_padto(skb, 17)) |
| return NETDEV_TX_OK; |
| |
| tx_ring = ring ? ring : adapter->tx_ring[skb->queue_mapping]; |
| |
| return ixgbe_xmit_frame_ring(skb, adapter, tx_ring); |
| } |
| |
| static netdev_tx_t ixgbe_xmit_frame(struct sk_buff *skb, |
| struct net_device *netdev) |
| { |
| return __ixgbe_xmit_frame(skb, netdev, NULL); |
| } |
| |
| /** |
| * ixgbe_set_mac - Change the Ethernet Address of the NIC |
| * @netdev: network interface device structure |
| * @p: pointer to an address structure |
| * |
| * Returns 0 on success, negative on failure |
| **/ |
| static int ixgbe_set_mac(struct net_device *netdev, void *p) |
| { |
| struct ixgbe_adapter *adapter = netdev_priv(netdev); |
| struct ixgbe_hw *hw = &adapter->hw; |
| struct sockaddr *addr = p; |
| |
| if (!is_valid_ether_addr(addr->sa_data)) |
| return -EADDRNOTAVAIL; |
| |
| memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len); |
| memcpy(hw->mac.addr, addr->sa_data, netdev->addr_len); |
| |
| ixgbe_mac_set_default_filter(adapter); |
| |
| return 0; |
| } |
| |
| static int |
| ixgbe_mdio_read(struct net_device *netdev, int prtad, int devad, u16 addr) |
| { |
| struct ixgbe_adapter *adapter = netdev_priv(netdev); |
| struct ixgbe_hw *hw = &adapter->hw; |
| u16 value; |
| int rc; |
| |
| if (prtad != hw->phy.mdio.prtad) |
| return -EINVAL; |
| rc = hw->phy.ops.read_reg(hw, addr, devad, &value); |
| if (!rc) |
| rc = value; |
| return rc; |
| } |
| |
| static int ixgbe_mdio_write(struct net_device *netdev, int prtad, int devad, |
| u16 addr, u16 value) |
| { |
| struct ixgbe_adapter *adapter = netdev_priv(netdev); |
| struct ixgbe_hw *hw = &adapter->hw; |
| |
| if (prtad != hw->phy.mdio.prtad) |
| return -EINVAL; |
| return hw->phy.ops.write_reg(hw, addr, devad, value); |
| } |
| |
| static int ixgbe_ioctl(struct net_device *netdev, struct ifreq *req, int cmd) |
| { |
| struct ixgbe_adapter *adapter = netdev_priv(netdev); |
| |
| switch (cmd) { |
| case SIOCSHWTSTAMP: |
| return ixgbe_ptp_set_ts_config(adapter, req); |
| case SIOCGHWTSTAMP: |
| return ixgbe_ptp_get_ts_config(adapter, req); |
| default: |
| return mdio_mii_ioctl(&adapter->hw.phy.mdio, if_mii(req), cmd); |
| } |
| } |
| |
| /** |
| * ixgbe_add_sanmac_netdev - Add the SAN MAC address to the corresponding |
| * netdev->dev_addrs |
| * @netdev: network interface device structure |
| * |
| * Returns non-zero on failure |
| **/ |
| static int ixgbe_add_sanmac_netdev(struct net_device *dev) |
| { |
| int err = 0; |
| struct ixgbe_adapter *adapter = netdev_priv(dev); |
| struct ixgbe_hw *hw = &adapter->hw; |
| |
| if (is_valid_ether_addr(hw->mac.san_addr)) { |
| rtnl_lock(); |
| err = dev_addr_add(dev, hw->mac.san_addr, NETDEV_HW_ADDR_T_SAN); |
| rtnl_unlock(); |
| |
| /* update SAN MAC vmdq pool selection */ |
| hw->mac.ops.set_vmdq_san_mac(hw, VMDQ_P(0)); |
| } |
| return err; |
| } |
| |
| /** |
| * ixgbe_del_sanmac_netdev - Removes the SAN MAC address to the corresponding |
| * netdev->dev_addrs |
| * @netdev: network interface device structure |
| * |
| * Returns non-zero on failure |
| **/ |
| static int ixgbe_del_sanmac_netdev(struct net_device *dev) |
| { |
| int err = 0; |
| struct ixgbe_adapter *adapter = netdev_priv(dev); |
| struct ixgbe_mac_info *mac = &adapter->hw.mac; |
| |
| if (is_valid_ether_addr(mac->san_addr)) { |
| rtnl_lock(); |
| err = dev_addr_del(dev, mac->san_addr, NETDEV_HW_ADDR_T_SAN); |
| rtnl_unlock(); |
| } |
| return err; |
| } |
| |
| #ifdef CONFIG_NET_POLL_CONTROLLER |
| /* |
| * Polling 'interrupt' - used by things like netconsole to send skbs |
| * without having to re-enable interrupts. It's not called while |
| * the interrupt routine is executing. |
| */ |
| static void ixgbe_netpoll(struct net_device *netdev) |
| { |
| struct ixgbe_adapter *adapter = netdev_priv(netdev); |
| int i; |
| |
| /* if interface is down do nothing */ |
| if (test_bit(__IXGBE_DOWN, &adapter->state)) |
| return; |
| |
| /* loop through and schedule all active queues */ |
| for (i = 0; i < adapter->num_q_vectors; i++) |
| ixgbe_msix_clean_rings(0, adapter->q_vector[i]); |
| } |
| |
| #endif |
| static struct rtnl_link_stats64 *ixgbe_get_stats64(struct net_device *netdev, |
| struct rtnl_link_stats64 *stats) |
| { |
| struct ixgbe_adapter *adapter = netdev_priv(netdev); |
| int i; |
| |
| rcu_read_lock(); |
| for (i = 0; i < adapter->num_rx_queues; i++) { |
| struct ixgbe_ring *ring = ACCESS_ONCE(adapter->rx_ring[i]); |
| u64 bytes, packets; |
| unsigned int start; |
| |
| if (ring) { |
| do { |
| start = u64_stats_fetch_begin_irq(&ring->syncp); |
| packets = ring->stats.packets; |
| bytes = ring->stats.bytes; |
| } while (u64_stats_fetch_retry_irq(&ring->syncp, start)); |
| stats->rx_packets += packets; |
| stats->rx_bytes += bytes; |
| } |
| } |
| |
| for (i = 0; i < adapter->num_tx_queues; i++) { |
| struct ixgbe_ring *ring = ACCESS_ONCE(adapter->tx_ring[i]); |
| u64 bytes, packets; |
| unsigned int start; |
| |
| if (ring) { |
| do { |
| start = u64_stats_fetch_begin_irq(&ring->syncp); |
| packets = ring->stats.packets; |
| bytes = ring->stats.bytes; |
| } while (u64_stats_fetch_retry_irq(&ring->syncp, start)); |
| stats->tx_packets += packets; |
| stats->tx_bytes += bytes; |
| } |
| } |
| rcu_read_unlock(); |
| /* following stats updated by ixgbe_watchdog_task() */ |
| stats->multicast = netdev->stats.multicast; |
| stats->rx_errors = netdev->stats.rx_errors; |
| stats->rx_length_errors = netdev->stats.rx_length_errors; |
| stats->rx_crc_errors = netdev->stats.rx_crc_errors; |
| stats->rx_missed_errors = netdev->stats.rx_missed_errors; |
| return stats; |
| } |
| |
| #ifdef CONFIG_IXGBE_DCB |
| /** |
| * ixgbe_validate_rtr - verify 802.1Qp to Rx packet buffer mapping is valid. |
| * @adapter: pointer to ixgbe_adapter |
| * @tc: number of traffic classes currently enabled |
| * |
| * Configure a valid 802.1Qp to Rx packet buffer mapping ie confirm |
| * 802.1Q priority maps to a packet buffer that exists. |
| */ |
| static void ixgbe_validate_rtr(struct ixgbe_adapter *adapter, u8 tc) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| u32 reg, rsave; |
| int i; |
| |
| /* 82598 have a static priority to TC mapping that can not |
| * be changed so no validation is needed. |
| */ |
| if (hw->mac.type == ixgbe_mac_82598EB) |
| return; |
| |
| reg = IXGBE_READ_REG(hw, IXGBE_RTRUP2TC); |
| rsave = reg; |
| |
| for (i = 0; i < MAX_TRAFFIC_CLASS; i++) { |
| u8 up2tc = reg >> (i * IXGBE_RTRUP2TC_UP_SHIFT); |
| |
| /* If up2tc is out of bounds default to zero */ |
| if (up2tc > tc) |
| reg &= ~(0x7 << IXGBE_RTRUP2TC_UP_SHIFT); |
| } |
| |
| if (reg != rsave) |
| IXGBE_WRITE_REG(hw, IXGBE_RTRUP2TC, reg); |
| |
| return; |
| } |
| |
| /** |
| * ixgbe_set_prio_tc_map - Configure netdev prio tc map |
| * @adapter: Pointer to adapter struct |
| * |
| * Populate the netdev user priority to tc map |
| */ |
| static void ixgbe_set_prio_tc_map(struct ixgbe_adapter *adapter) |
| { |
| struct net_device *dev = adapter->netdev; |
| struct ixgbe_dcb_config *dcb_cfg = &adapter->dcb_cfg; |
| struct ieee_ets *ets = adapter->ixgbe_ieee_ets; |
| u8 prio; |
| |
| for (prio = 0; prio < MAX_USER_PRIORITY; prio++) { |
| u8 tc = 0; |
| |
| if (adapter->dcbx_cap & DCB_CAP_DCBX_VER_CEE) |
| tc = ixgbe_dcb_get_tc_from_up(dcb_cfg, 0, prio); |
| else if (ets) |
| tc = ets->prio_tc[prio]; |
| |
| netdev_set_prio_tc_map(dev, prio, tc); |
| } |
| } |
| |
| #endif /* CONFIG_IXGBE_DCB */ |
| /** |
| * ixgbe_setup_tc - configure net_device for multiple traffic classes |
| * |
| * @netdev: net device to configure |
| * @tc: number of traffic classes to enable |
| */ |
| int ixgbe_setup_tc(struct net_device *dev, u8 tc) |
| { |
| struct ixgbe_adapter *adapter = netdev_priv(dev); |
| struct ixgbe_hw *hw = &adapter->hw; |
| bool pools; |
| |
| /* Hardware supports up to 8 traffic classes */ |
| if (tc > adapter->dcb_cfg.num_tcs.pg_tcs) |
| return -EINVAL; |
| |
| if (hw->mac.type == ixgbe_mac_82598EB && tc && tc < MAX_TRAFFIC_CLASS) |
| return -EINVAL; |
| |
| pools = (find_first_zero_bit(&adapter->fwd_bitmask, 32) > 1); |
| if (tc && pools && adapter->num_rx_pools > IXGBE_MAX_DCBMACVLANS) |
| return -EBUSY; |
| |
| /* Hardware has to reinitialize queues and interrupts to |
| * match packet buffer alignment. Unfortunately, the |
| * hardware is not flexible enough to do this dynamically. |
| */ |
| if (netif_running(dev)) |
| ixgbe_close(dev); |
| else |
| ixgbe_reset(adapter); |
| |
| ixgbe_clear_interrupt_scheme(adapter); |
| |
| #ifdef CONFIG_IXGBE_DCB |
| if (tc) { |
| netdev_set_num_tc(dev, tc); |
| ixgbe_set_prio_tc_map(adapter); |
| |
| adapter->flags |= IXGBE_FLAG_DCB_ENABLED; |
| |
| if (adapter->hw.mac.type == ixgbe_mac_82598EB) { |
| adapter->last_lfc_mode = adapter->hw.fc.requested_mode; |
| adapter->hw.fc.requested_mode = ixgbe_fc_none; |
| } |
| } else { |
| netdev_reset_tc(dev); |
| |
| if (adapter->hw.mac.type == ixgbe_mac_82598EB) |
| adapter->hw.fc.requested_mode = adapter->last_lfc_mode; |
| |
| adapter->flags &= ~IXGBE_FLAG_DCB_ENABLED; |
| |
| adapter->temp_dcb_cfg.pfc_mode_enable = false; |
| adapter->dcb_cfg.pfc_mode_enable = false; |
| } |
| |
| ixgbe_validate_rtr(adapter, tc); |
| |
| #endif /* CONFIG_IXGBE_DCB */ |
| ixgbe_init_interrupt_scheme(adapter); |
| |
| if (netif_running(dev)) |
| return ixgbe_open(dev); |
| |
| return 0; |
| } |
| |
| static int ixgbe_delete_clsu32(struct ixgbe_adapter *adapter, |
| struct tc_cls_u32_offload *cls) |
| { |
| u32 uhtid = TC_U32_USERHTID(cls->knode.handle); |
| u32 loc; |
| int err; |
| |
| if ((uhtid != 0x800) && (uhtid >= IXGBE_MAX_LINK_HANDLE)) |
| return -EINVAL; |
| |
| loc = cls->knode.handle & 0xfffff; |
| |
| spin_lock(&adapter->fdir_perfect_lock); |
| err = ixgbe_update_ethtool_fdir_entry(adapter, NULL, loc); |
| spin_unlock(&adapter->fdir_perfect_lock); |
| return err; |
| } |
| |
| static int ixgbe_configure_clsu32_add_hnode(struct ixgbe_adapter *adapter, |
| __be16 protocol, |
| struct tc_cls_u32_offload *cls) |
| { |
| u32 uhtid = TC_U32_USERHTID(cls->hnode.handle); |
| |
| if (uhtid >= IXGBE_MAX_LINK_HANDLE) |
| return -EINVAL; |
| |
| /* This ixgbe devices do not support hash tables at the moment |
| * so abort when given hash tables. |
| */ |
| if (cls->hnode.divisor > 0) |
| return -EINVAL; |
| |
| set_bit(uhtid - 1, &adapter->tables); |
| return 0; |
| } |
| |
| static int ixgbe_configure_clsu32_del_hnode(struct ixgbe_adapter *adapter, |
| struct tc_cls_u32_offload *cls) |
| { |
| u32 uhtid = TC_U32_USERHTID(cls->hnode.handle); |
| |
| if (uhtid >= IXGBE_MAX_LINK_HANDLE) |
| return -EINVAL; |
| |
| clear_bit(uhtid - 1, &adapter->tables); |
| return 0; |
| } |
| |
| static int ixgbe_configure_clsu32(struct ixgbe_adapter *adapter, |
| __be16 protocol, |
| struct tc_cls_u32_offload *cls) |
| { |
| u32 loc = cls->knode.handle & 0xfffff; |
| struct ixgbe_hw *hw = &adapter->hw; |
| struct ixgbe_mat_field *field_ptr; |
| struct ixgbe_fdir_filter *input; |
| union ixgbe_atr_input mask; |
| #ifdef CONFIG_NET_CLS_ACT |
| const struct tc_action *a; |
| #endif |
| int i, err = 0; |
| u8 queue; |
| u32 uhtid, link_uhtid; |
| |
| memset(&mask, 0, sizeof(union ixgbe_atr_input)); |
| uhtid = TC_U32_USERHTID(cls->knode.handle); |
| link_uhtid = TC_U32_USERHTID(cls->knode.link_handle); |
| |
| /* At the moment cls_u32 jumps to network layer and skips past |
| * L2 headers. The canonical method to match L2 frames is to use |
| * negative values. However this is error prone at best but really |
| * just broken because there is no way to "know" what sort of hdr |
| * is in front of the network layer. Fix cls_u32 to support L2 |
| * headers when needed. |
| */ |
| if (protocol != htons(ETH_P_IP)) |
| return -EINVAL; |
| |
| if (link_uhtid) { |
| struct ixgbe_nexthdr *nexthdr = ixgbe_ipv4_jumps; |
| |
| if (link_uhtid >= IXGBE_MAX_LINK_HANDLE) |
| return -EINVAL; |
| |
| if (!test_bit(link_uhtid - 1, &adapter->tables)) |
| return -EINVAL; |
| |
| for (i = 0; nexthdr[i].jump; i++) { |
| if (nexthdr->o != cls->knode.sel->offoff || |
| nexthdr->s != cls->knode.sel->offshift || |
| nexthdr->m != cls->knode.sel->offmask || |
| /* do not support multiple key jumps its just mad */ |
| cls->knode.sel->nkeys > 1) |
| return -EINVAL; |
| |
| if (nexthdr->off != cls->knode.sel->keys[0].off || |
| nexthdr->val != cls->knode.sel->keys[0].val || |
| nexthdr->mask != cls->knode.sel->keys[0].mask) |
| return -EINVAL; |
| |
| adapter->jump_tables[link_uhtid] = nexthdr->jump; |
| } |
| return 0; |
| } |
| |
| if (loc >= ((1024 << adapter->fdir_pballoc) - 2)) { |
| e_err(drv, "Location out of range\n"); |
| return -EINVAL; |
| } |
| |
| /* cls u32 is a graph starting at root node 0x800. The driver tracks |
| * links and also the fields used to advance the parser across each |
| * link (e.g. nexthdr/eat parameters from 'tc'). This way we can map |
| * the u32 graph onto the hardware parse graph denoted in ixgbe_model.h |
| * To add support for new nodes update ixgbe_model.h parse structures |
| * this function _should_ be generic try not to hardcode values here. |
| */ |
| if (uhtid == 0x800) { |
| field_ptr = adapter->jump_tables[0]; |
| } else { |
| if (uhtid >= IXGBE_MAX_LINK_HANDLE) |
| return -EINVAL; |
| |
| field_ptr = adapter->jump_tables[uhtid]; |
| } |
| |
| if (!field_ptr) |
| return -EINVAL; |
| |
| input = kzalloc(sizeof(*input), GFP_KERNEL); |
| if (!input) |
| return -ENOMEM; |
| |
| for (i = 0; i < cls->knode.sel->nkeys; i++) { |
| int off = cls->knode.sel->keys[i].off; |
| __be32 val = cls->knode.sel->keys[i].val; |
| __be32 m = cls->knode.sel->keys[i].mask; |
| bool found_entry = false; |
| int j; |
| |
| for (j = 0; field_ptr[j].val; j++) { |
| if (field_ptr[j].off == off) { |
| field_ptr[j].val(input, &mask, val, m); |
| input->filter.formatted.flow_type |= |
| field_ptr[j].type; |
| found_entry = true; |
| break; |
| } |
| } |
| |
| if (!found_entry) |
| goto err_out; |
| } |
| |
| mask.formatted.flow_type = IXGBE_ATR_L4TYPE_IPV6_MASK | |
| IXGBE_ATR_L4TYPE_MASK; |
| |
| if (input->filter.formatted.flow_type == IXGBE_ATR_FLOW_TYPE_IPV4) |
| mask.formatted.flow_type &= IXGBE_ATR_L4TYPE_IPV6_MASK; |
| |
| #ifdef CONFIG_NET_CLS_ACT |
| if (list_empty(&cls->knode.exts->actions)) |
| goto err_out; |
| |
| list_for_each_entry(a, &cls->knode.exts->actions, list) { |
| if (!is_tcf_gact_shot(a)) |
| goto err_out; |
| } |
| #endif |
| |
| input->action = IXGBE_FDIR_DROP_QUEUE; |
| queue = IXGBE_FDIR_DROP_QUEUE; |
| input->sw_idx = loc; |
| |
| spin_lock(&adapter->fdir_perfect_lock); |
| |
| if (hlist_empty(&adapter->fdir_filter_list)) { |
| memcpy(&adapter->fdir_mask, &mask, sizeof(mask)); |
| err = ixgbe_fdir_set_input_mask_82599(hw, &mask); |
| if (err) |
| goto err_out_w_lock; |
| } else if (memcmp(&adapter->fdir_mask, &mask, sizeof(mask))) { |
| err = -EINVAL; |
| goto err_out_w_lock; |
| } |
| |
| ixgbe_atr_compute_perfect_hash_82599(&input->filter, &mask); |
| err = ixgbe_fdir_write_perfect_filter_82599(hw, &input->filter, |
| input->sw_idx, queue); |
| if (!err) |
| ixgbe_update_ethtool_fdir_entry(adapter, input, input->sw_idx); |
| spin_unlock(&adapter->fdir_perfect_lock); |
| |
| return err; |
| err_out_w_lock: |
| spin_unlock(&adapter->fdir_perfect_lock); |
| err_out: |
| kfree(input); |
| return -EINVAL; |
| } |
| |
| static int __ixgbe_setup_tc(struct net_device *dev, u32 handle, __be16 proto, |
| struct tc_to_netdev *tc) |
| { |
| struct ixgbe_adapter *adapter = netdev_priv(dev); |
| |
| if (TC_H_MAJ(handle) == TC_H_MAJ(TC_H_INGRESS) && |
| tc->type == TC_SETUP_CLSU32) { |
| switch (tc->cls_u32->command) { |
| case TC_CLSU32_NEW_KNODE: |
| case TC_CLSU32_REPLACE_KNODE: |
| return ixgbe_configure_clsu32(adapter, |
| proto, tc->cls_u32); |
| case TC_CLSU32_DELETE_KNODE: |
| return ixgbe_delete_clsu32(adapter, tc->cls_u32); |
| case TC_CLSU32_NEW_HNODE: |
| case TC_CLSU32_REPLACE_HNODE: |
| return ixgbe_configure_clsu32_add_hnode(adapter, proto, |
| tc->cls_u32); |
| case TC_CLSU32_DELETE_HNODE: |
| return ixgbe_configure_clsu32_del_hnode(adapter, |
| tc->cls_u32); |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| if (tc->type != TC_SETUP_MQPRIO) |
| return -EINVAL; |
| |
| return ixgbe_setup_tc(dev, tc->tc); |
| } |
| |
| #ifdef CONFIG_PCI_IOV |
| void ixgbe_sriov_reinit(struct ixgbe_adapter *adapter) |
| { |
| struct net_device *netdev = adapter->netdev; |
| |
| rtnl_lock(); |
| ixgbe_setup_tc(netdev, netdev_get_num_tc(netdev)); |
| rtnl_unlock(); |
| } |
| |
| #endif |
| void ixgbe_do_reset(struct net_device *netdev) |
| { |
| struct ixgbe_adapter *adapter = netdev_priv(netdev); |
| |
| if (netif_running(netdev)) |
| ixgbe_reinit_locked(adapter); |
| else |
| ixgbe_reset(adapter); |
| } |
| |
| static netdev_features_t ixgbe_fix_features(struct net_device *netdev, |
| netdev_features_t features) |
| { |
| struct ixgbe_adapter *adapter = netdev_priv(netdev); |
| |
| /* If Rx checksum is disabled, then RSC/LRO should also be disabled */ |
| if (!(features & NETIF_F_RXCSUM)) |
| features &= ~NETIF_F_LRO; |
| |
| /* Turn off LRO if not RSC capable */ |
| if (!(adapter->flags2 & IXGBE_FLAG2_RSC_CAPABLE)) |
| features &= ~NETIF_F_LRO; |
| |
| return features; |
| } |
| |
| static int ixgbe_set_features(struct net_device *netdev, |
| netdev_features_t features) |
| { |
| struct ixgbe_adapter *adapter = netdev_priv(netdev); |
| netdev_features_t changed = netdev->features ^ features; |
| bool need_reset = false; |
| |
| /* Make sure RSC matches LRO, reset if change */ |
| if (!(features & NETIF_F_LRO)) { |
| if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) |
| need_reset = true; |
| adapter->flags2 &= ~IXGBE_FLAG2_RSC_ENABLED; |
| } else if ((adapter->flags2 & IXGBE_FLAG2_RSC_CAPABLE) && |
| !(adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED)) { |
| if (adapter->rx_itr_setting == 1 || |
| adapter->rx_itr_setting > IXGBE_MIN_RSC_ITR) { |
| adapter->flags2 |= IXGBE_FLAG2_RSC_ENABLED; |
| need_reset = true; |
| } else if ((changed ^ features) & NETIF_F_LRO) { |
| e_info(probe, "rx-usecs set too low, " |
| "disabling RSC\n"); |
| } |
| } |
| |
| /* |
| * Check if Flow Director n-tuple support or hw_tc support was |
| * enabled or disabled. If the state changed, we need to reset. |
| */ |
| if ((features & NETIF_F_NTUPLE) || (features & NETIF_F_HW_TC)) { |
| /* turn off ATR, enable perfect filters and reset */ |
| if (!(adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE)) |
| need_reset = true; |
| |
| adapter->flags &= ~IXGBE_FLAG_FDIR_HASH_CAPABLE; |
| adapter->flags |= IXGBE_FLAG_FDIR_PERFECT_CAPABLE; |
| } else { |
| /* turn off perfect filters, enable ATR and reset */ |
| if (adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE) |
| need_reset = true; |
| |
| adapter->flags &= ~IXGBE_FLAG_FDIR_PERFECT_CAPABLE; |
| |
| /* We cannot enable ATR if SR-IOV is enabled */ |
| if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED || |
| /* We cannot enable ATR if we have 2 or more tcs */ |
| (netdev_get_num_tc(netdev) > 1) || |
| /* We cannot enable ATR if RSS is disabled */ |
| (adapter->ring_feature[RING_F_RSS].limit <= 1) || |
| /* A sample rate of 0 indicates ATR disabled */ |
| (!adapter->atr_sample_rate)) |
| ; /* do nothing not supported */ |
| else /* otherwise supported and set the flag */ |
| adapter->flags |= IXGBE_FLAG_FDIR_HASH_CAPABLE; |
| } |
| |
| if (features & NETIF_F_HW_VLAN_CTAG_RX) |
| ixgbe_vlan_strip_enable(adapter); |
| else |
| ixgbe_vlan_strip_disable(adapter); |
| |
| if (changed & NETIF_F_RXALL) |
| need_reset = true; |
| |
| netdev->features = features; |
| |
| #ifdef CONFIG_IXGBE_VXLAN |
| if ((adapter->flags & IXGBE_FLAG_VXLAN_OFFLOAD_CAPABLE)) { |
| if (features & NETIF_F_RXCSUM) |
| adapter->flags2 |= IXGBE_FLAG2_VXLAN_REREG_NEEDED; |
| else |
| ixgbe_clear_vxlan_port(adapter); |
| } |
| #endif /* CONFIG_IXGBE_VXLAN */ |
| |
| if (need_reset) |
| ixgbe_do_reset(netdev); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_IXGBE_VXLAN |
| /** |
| * ixgbe_add_vxlan_port - Get notifications about VXLAN ports that come up |
| * @dev: The port's netdev |
| * @sa_family: Socket Family that VXLAN is notifiying us about |
| * @port: New UDP port number that VXLAN started listening to |
| **/ |
| static void ixgbe_add_vxlan_port(struct net_device *dev, sa_family_t sa_family, |
| __be16 port) |
| { |
| struct ixgbe_adapter *adapter = netdev_priv(dev); |
| struct ixgbe_hw *hw = &adapter->hw; |
| |
| if (!(adapter->flags & IXGBE_FLAG_VXLAN_OFFLOAD_CAPABLE)) |
| return; |
| |
| if (sa_family == AF_INET6) |
| return; |
| |
| if (adapter->vxlan_port == port) |
| return; |
| |
| if (adapter->vxlan_port) { |
| netdev_info(dev, |
| "Hit Max num of VXLAN ports, not adding port %d\n", |
| ntohs(port)); |
| return; |
| } |
| |
| adapter->vxlan_port = port; |
| IXGBE_WRITE_REG(hw, IXGBE_VXLANCTRL, ntohs(port)); |
| } |
| |
| /** |
| * ixgbe_del_vxlan_port - Get notifications about VXLAN ports that go away |
| * @dev: The port's netdev |
| * @sa_family: Socket Family that VXLAN is notifying us about |
| * @port: UDP port number that VXLAN stopped listening to |
| **/ |
| static void ixgbe_del_vxlan_port(struct net_device *dev, sa_family_t sa_family, |
| __be16 port) |
| { |
| struct ixgbe_adapter *adapter = netdev_priv(dev); |
| |
| if (!(adapter->flags & IXGBE_FLAG_VXLAN_OFFLOAD_CAPABLE)) |
| return; |
| |
| if (sa_family == AF_INET6) |
| return; |
| |
| if (adapter->vxlan_port != port) { |
| netdev_info(dev, "Port %d was not found, not deleting\n", |
| ntohs(port)); |
| return; |
| } |
| |
| ixgbe_clear_vxlan_port(adapter); |
| adapter->flags2 |= IXGBE_FLAG2_VXLAN_REREG_NEEDED; |
| } |
| #endif /* CONFIG_IXGBE_VXLAN */ |
| |
| static int ixgbe_ndo_fdb_add(struct ndmsg *ndm, struct nlattr *tb[], |
| struct net_device *dev, |
| const unsigned char *addr, u16 vid, |
| u16 flags) |
| { |
| /* guarantee we can provide a unique filter for the unicast address */ |
| if (is_unicast_ether_addr(addr) || is_link_local_ether_addr(addr)) { |
| struct ixgbe_adapter *adapter = netdev_priv(dev); |
| u16 pool = VMDQ_P(0); |
| |
| if (netdev_uc_count(dev) >= ixgbe_available_rars(adapter, pool)) |
| return -ENOMEM; |
| } |
| |
| return ndo_dflt_fdb_add(ndm, tb, dev, addr, vid, flags); |
| } |
| |
| /** |
| * ixgbe_configure_bridge_mode - set various bridge modes |
| * @adapter - the private structure |
| * @mode - requested bridge mode |
| * |
| * Configure some settings require for various bridge modes. |
| **/ |
| static int ixgbe_configure_bridge_mode(struct ixgbe_adapter *adapter, |
| __u16 mode) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| unsigned int p, num_pools; |
| u32 vmdctl; |
| |
| switch (mode) { |
| case BRIDGE_MODE_VEPA: |
| /* disable Tx loopback, rely on switch hairpin mode */ |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_PFDTXGSWC, 0); |
| |
| /* must enable Rx switching replication to allow multicast |
| * packet reception on all VFs, and to enable source address |
| * pruning. |
| */ |
| vmdctl = IXGBE_READ_REG(hw, IXGBE_VMD_CTL); |
| vmdctl |= IXGBE_VT_CTL_REPLEN; |
| IXGBE_WRITE_REG(hw, IXGBE_VMD_CTL, vmdctl); |
| |
| /* enable Rx source address pruning. Note, this requires |
| * replication to be enabled or else it does nothing. |
| */ |
| num_pools = adapter->num_vfs + adapter->num_rx_pools; |
| for (p = 0; p < num_pools; p++) { |
| if (hw->mac.ops.set_source_address_pruning) |
| hw->mac.ops.set_source_address_pruning(hw, |
| true, |
| p); |
| } |
| break; |
| case BRIDGE_MODE_VEB: |
| /* enable Tx loopback for internal VF/PF communication */ |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_PFDTXGSWC, |
| IXGBE_PFDTXGSWC_VT_LBEN); |
| |
| /* disable Rx switching replication unless we have SR-IOV |
| * virtual functions |
| */ |
| vmdctl = IXGBE_READ_REG(hw, IXGBE_VMD_CTL); |
| if (!adapter->num_vfs) |
| vmdctl &= ~IXGBE_VT_CTL_REPLEN; |
| IXGBE_WRITE_REG(hw, IXGBE_VMD_CTL, vmdctl); |
| |
| /* disable Rx source address pruning, since we don't expect to |
| * be receiving external loopback of our transmitted frames. |
| */ |
| num_pools = adapter->num_vfs + adapter->num_rx_pools; |
| for (p = 0; p < num_pools; p++) { |
| if (hw->mac.ops.set_source_address_pruning) |
| hw->mac.ops.set_source_address_pruning(hw, |
| false, |
| p); |
| } |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| adapter->bridge_mode = mode; |
| |
| e_info(drv, "enabling bridge mode: %s\n", |
| mode == BRIDGE_MODE_VEPA ? "VEPA" : "VEB"); |
| |
| return 0; |
| } |
| |
| static int ixgbe_ndo_bridge_setlink(struct net_device *dev, |
| struct nlmsghdr *nlh, u16 flags) |
| { |
| struct ixgbe_adapter *adapter = netdev_priv(dev); |
| struct nlattr *attr, *br_spec; |
| int rem; |
| |
| if (!(adapter->flags & IXGBE_FLAG_SRIOV_ENABLED)) |
| return -EOPNOTSUPP; |
| |
| br_spec = nlmsg_find_attr(nlh, sizeof(struct ifinfomsg), IFLA_AF_SPEC); |
| if (!br_spec) |
| return -EINVAL; |
| |
| nla_for_each_nested(attr, br_spec, rem) { |
| int status; |
| __u16 mode; |
| |
| if (nla_type(attr) != IFLA_BRIDGE_MODE) |
| continue; |
| |
| if (nla_len(attr) < sizeof(mode)) |
| return -EINVAL; |
| |
| mode = nla_get_u16(attr); |
| status = ixgbe_configure_bridge_mode(adapter, mode); |
| if (status) |
| return status; |
| |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static int ixgbe_ndo_bridge_getlink(struct sk_buff *skb, u32 pid, u32 seq, |
| struct net_device *dev, |
| u32 filter_mask, int nlflags) |
| { |
| struct ixgbe_adapter *adapter = netdev_priv(dev); |
| |
| if (!(adapter->flags & IXGBE_FLAG_SRIOV_ENABLED)) |
| return 0; |
| |
| return ndo_dflt_bridge_getlink(skb, pid, seq, dev, |
| adapter->bridge_mode, 0, 0, nlflags, |
| filter_mask, NULL); |
| } |
| |
| static void *ixgbe_fwd_add(struct net_device *pdev, struct net_device *vdev) |
| { |
| struct ixgbe_fwd_adapter *fwd_adapter = NULL; |
| struct ixgbe_adapter *adapter = netdev_priv(pdev); |
| int used_pools = adapter->num_vfs + adapter->num_rx_pools; |
| unsigned int limit; |
| int pool, err; |
| |
| /* Hardware has a limited number of available pools. Each VF, and the |
| * PF require a pool. Check to ensure we don't attempt to use more |
| * then the available number of pools. |
| */ |
| if (used_pools >= IXGBE_MAX_VF_FUNCTIONS) |
| return ERR_PTR(-EINVAL); |
| |
| #ifdef CONFIG_RPS |
| if (vdev->num_rx_queues != vdev->num_tx_queues) { |
| netdev_info(pdev, "%s: Only supports a single queue count for TX and RX\n", |
| vdev->name); |
| return ERR_PTR(-EINVAL); |
| } |
| #endif |
| /* Check for hardware restriction on number of rx/tx queues */ |
| if (vdev->num_tx_queues > IXGBE_MAX_L2A_QUEUES || |
| vdev->num_tx_queues == IXGBE_BAD_L2A_QUEUE) { |
| netdev_info(pdev, |
| "%s: Supports RX/TX Queue counts 1,2, and 4\n", |
| pdev->name); |
| return ERR_PTR(-EINVAL); |
| } |
| |
| if (((adapter->flags & IXGBE_FLAG_DCB_ENABLED) && |
| adapter->num_rx_pools > IXGBE_MAX_DCBMACVLANS - 1) || |
| (adapter->num_rx_pools > IXGBE_MAX_MACVLANS)) |
| return ERR_PTR(-EBUSY); |
| |
| fwd_adapter = kzalloc(sizeof(*fwd_adapter), GFP_KERNEL); |
| if (!fwd_adapter) |
| return ERR_PTR(-ENOMEM); |
| |
| pool = find_first_zero_bit(&adapter->fwd_bitmask, 32); |
| adapter->num_rx_pools++; |
| set_bit(pool, &adapter->fwd_bitmask); |
| limit = find_last_bit(&adapter->fwd_bitmask, 32); |
| |
| /* Enable VMDq flag so device will be set in VM mode */ |
| adapter->flags |= IXGBE_FLAG_VMDQ_ENABLED | IXGBE_FLAG_SRIOV_ENABLED; |
| adapter->ring_feature[RING_F_VMDQ].limit = limit + 1; |
| adapter->ring_feature[RING_F_RSS].limit = vdev->num_tx_queues; |
| |
| /* Force reinit of ring allocation with VMDQ enabled */ |
| err = ixgbe_setup_tc(pdev, netdev_get_num_tc(pdev)); |
| if (err) |
| goto fwd_add_err; |
| fwd_adapter->pool = pool; |
| fwd_adapter->real_adapter = adapter; |
| err = ixgbe_fwd_ring_up(vdev, fwd_adapter); |
| if (err) |
| goto fwd_add_err; |
| netif_tx_start_all_queues(vdev); |
| return fwd_adapter; |
| fwd_add_err: |
| /* unwind counter and free adapter struct */ |
| netdev_info(pdev, |
| "%s: dfwd hardware acceleration failed\n", vdev->name); |
| clear_bit(pool, &adapter->fwd_bitmask); |
| adapter->num_rx_pools--; |
| kfree(fwd_adapter); |
| return ERR_PTR(err); |
| } |
| |
| static void ixgbe_fwd_del(struct net_device *pdev, void *priv) |
| { |
| struct ixgbe_fwd_adapter *fwd_adapter = priv; |
| struct ixgbe_adapter *adapter = fwd_adapter->real_adapter; |
| unsigned int limit; |
| |
| clear_bit(fwd_adapter->pool, &adapter->fwd_bitmask); |
| adapter->num_rx_pools--; |
| |
| limit = find_last_bit(&adapter->fwd_bitmask, 32); |
| adapter->ring_feature[RING_F_VMDQ].limit = limit + 1; |
| ixgbe_fwd_ring_down(fwd_adapter->netdev, fwd_adapter); |
| ixgbe_setup_tc(pdev, netdev_get_num_tc(pdev)); |
| netdev_dbg(pdev, "pool %i:%i queues %i:%i VSI bitmask %lx\n", |
| fwd_adapter->pool, adapter->num_rx_pools, |
| fwd_adapter->rx_base_queue, |
| fwd_adapter->rx_base_queue + adapter->num_rx_queues_per_pool, |
| adapter->fwd_bitmask); |
| kfree(fwd_adapter); |
| } |
| |
| #define IXGBE_MAX_TUNNEL_HDR_LEN 80 |
| static netdev_features_t |
| ixgbe_features_check(struct sk_buff *skb, struct net_device *dev, |
| netdev_features_t features) |
| { |
| if (!skb->encapsulation) |
| return features; |
| |
| if (unlikely(skb_inner_mac_header(skb) - skb_transport_header(skb) > |
| IXGBE_MAX_TUNNEL_HDR_LEN)) |
| return features & ~NETIF_F_CSUM_MASK; |
| |
| return features; |
| } |
| |
| static const struct net_device_ops ixgbe_netdev_ops = { |
| .ndo_open = ixgbe_open, |
| .ndo_stop = ixgbe_close, |
| .ndo_start_xmit = ixgbe_xmit_frame, |
| .ndo_select_queue = ixgbe_select_queue, |
| .ndo_set_rx_mode = ixgbe_set_rx_mode, |
| .ndo_validate_addr = eth_validate_addr, |
| .ndo_set_mac_address = ixgbe_set_mac, |
| .ndo_change_mtu = ixgbe_change_mtu, |
| .ndo_tx_timeout = ixgbe_tx_timeout, |
| .ndo_vlan_rx_add_vid = ixgbe_vlan_rx_add_vid, |
| .ndo_vlan_rx_kill_vid = ixgbe_vlan_rx_kill_vid, |
| .ndo_do_ioctl = ixgbe_ioctl, |
| .ndo_set_vf_mac = ixgbe_ndo_set_vf_mac, |
| .ndo_set_vf_vlan = ixgbe_ndo_set_vf_vlan, |
| .ndo_set_vf_rate = ixgbe_ndo_set_vf_bw, |
| .ndo_set_vf_spoofchk = ixgbe_ndo_set_vf_spoofchk, |
| .ndo_set_vf_rss_query_en = ixgbe_ndo_set_vf_rss_query_en, |
| .ndo_set_vf_trust = ixgbe_ndo_set_vf_trust, |
| .ndo_get_vf_config = ixgbe_ndo_get_vf_config, |
| .ndo_get_stats64 = ixgbe_get_stats64, |
| .ndo_setup_tc = __ixgbe_setup_tc, |
| #ifdef CONFIG_NET_POLL_CONTROLLER |
| .ndo_poll_controller = ixgbe_netpoll, |
| #endif |
| #ifdef CONFIG_NET_RX_BUSY_POLL |
| .ndo_busy_poll = ixgbe_low_latency_recv, |
| #endif |
| #ifdef IXGBE_FCOE |
| .ndo_fcoe_ddp_setup = ixgbe_fcoe_ddp_get, |
| .ndo_fcoe_ddp_target = ixgbe_fcoe_ddp_target, |
| .ndo_fcoe_ddp_done = ixgbe_fcoe_ddp_put, |
| .ndo_fcoe_enable = ixgbe_fcoe_enable, |
| .ndo_fcoe_disable = ixgbe_fcoe_disable, |
| .ndo_fcoe_get_wwn = ixgbe_fcoe_get_wwn, |
| .ndo_fcoe_get_hbainfo = ixgbe_fcoe_get_hbainfo, |
| #endif /* IXGBE_FCOE */ |
| .ndo_set_features = ixgbe_set_features, |
| .ndo_fix_features = ixgbe_fix_features, |
| .ndo_fdb_add = ixgbe_ndo_fdb_add, |
| .ndo_bridge_setlink = ixgbe_ndo_bridge_setlink, |
| .ndo_bridge_getlink = ixgbe_ndo_bridge_getlink, |
| .ndo_dfwd_add_station = ixgbe_fwd_add, |
| .ndo_dfwd_del_station = ixgbe_fwd_del, |
| #ifdef CONFIG_IXGBE_VXLAN |
| .ndo_add_vxlan_port = ixgbe_add_vxlan_port, |
| .ndo_del_vxlan_port = ixgbe_del_vxlan_port, |
| #endif /* CONFIG_IXGBE_VXLAN */ |
| .ndo_features_check = ixgbe_features_check, |
| }; |
| |
| /** |
| * ixgbe_enumerate_functions - Get the number of ports this device has |
| * @adapter: adapter structure |
| * |
| * This function enumerates the phsyical functions co-located on a single slot, |
| * in order to determine how many ports a device has. This is most useful in |
| * determining the required GT/s of PCIe bandwidth necessary for optimal |
| * performance. |
| **/ |
| static inline int ixgbe_enumerate_functions(struct ixgbe_adapter *adapter) |
| { |
| struct pci_dev *entry, *pdev = adapter->pdev; |
| int physfns = 0; |
| |
| /* Some cards can not use the generic count PCIe functions method, |
| * because they are behind a parent switch, so we hardcode these with |
| * the correct number of functions. |
| */ |
| if (ixgbe_pcie_from_parent(&adapter->hw)) |
| physfns = 4; |
| |
| list_for_each_entry(entry, &adapter->pdev->bus->devices, bus_list) { |
| /* don't count virtual functions */ |
| if (entry->is_virtfn) |
| continue; |
| |
| /* When the devices on the bus don't all match our device ID, |
| * we can't reliably determine the correct number of |
| * functions. This can occur if a function has been direct |
| * attached to a virtual machine using VT-d, for example. In |
| * this case, simply return -1 to indicate this. |
| */ |
| if ((entry->vendor != pdev->vendor) || |
| (entry->device != pdev->device)) |
| return -1; |
| |
| physfns++; |
| } |
| |
| return physfns; |
| } |
| |
| /** |
| * ixgbe_wol_supported - Check whether device supports WoL |
| * @hw: hw specific details |
| * @device_id: the device ID |
| * @subdev_id: the subsystem device ID |
| * |
| * This function is used by probe and ethtool to determine |
| * which devices have WoL support |
| * |
| **/ |
| int ixgbe_wol_supported(struct ixgbe_adapter *adapter, u16 device_id, |
| u16 subdevice_id) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| u16 wol_cap = adapter->eeprom_cap & IXGBE_DEVICE_CAPS_WOL_MASK; |
| int is_wol_supported = 0; |
| |
| switch (device_id) { |
| case IXGBE_DEV_ID_82599_SFP: |
| /* Only these subdevices could supports WOL */ |
| switch (subdevice_id) { |
| case IXGBE_SUBDEV_ID_82599_SFP_WOL0: |
| case IXGBE_SUBDEV_ID_82599_560FLR: |
| /* only support first port */ |
| if (hw->bus.func != 0) |
| break; |
| case IXGBE_SUBDEV_ID_82599_SP_560FLR: |
| case IXGBE_SUBDEV_ID_82599_SFP: |
| case IXGBE_SUBDEV_ID_82599_RNDC: |
| case IXGBE_SUBDEV_ID_82599_ECNA_DP: |
| case IXGBE_SUBDEV_ID_82599_LOM_SFP: |
| is_wol_supported = 1; |
| break; |
| } |
| break; |
| case IXGBE_DEV_ID_82599EN_SFP: |
| /* Only this subdevice supports WOL */ |
| switch (subdevice_id) { |
| case IXGBE_SUBDEV_ID_82599EN_SFP_OCP1: |
| is_wol_supported = 1; |
| break; |
| } |
| break; |
| case IXGBE_DEV_ID_82599_COMBO_BACKPLANE: |
| /* All except this subdevice support WOL */ |
| if (subdevice_id != IXGBE_SUBDEV_ID_82599_KX4_KR_MEZZ) |
| is_wol_supported = 1; |
| break; |
| case IXGBE_DEV_ID_82599_KX4: |
| is_wol_supported = 1; |
| break; |
| case IXGBE_DEV_ID_X540T: |
| case IXGBE_DEV_ID_X540T1: |
| case IXGBE_DEV_ID_X550T: |
| case IXGBE_DEV_ID_X550EM_X_KX4: |
| case IXGBE_DEV_ID_X550EM_X_KR: |
| case IXGBE_DEV_ID_X550EM_X_10G_T: |
| /* check eeprom to see if enabled wol */ |
| if ((wol_cap == IXGBE_DEVICE_CAPS_WOL_PORT0_1) || |
| ((wol_cap == IXGBE_DEVICE_CAPS_WOL_PORT0) && |
| (hw->bus.func == 0))) { |
| is_wol_supported = 1; |
| } |
| break; |
| } |
| |
| return is_wol_supported; |
| } |
| |
| /** |
| * ixgbe_get_platform_mac_addr - Look up MAC address in Open Firmware / IDPROM |
| * @adapter: Pointer to adapter struct |
| */ |
| static void ixgbe_get_platform_mac_addr(struct ixgbe_adapter *adapter) |
| { |
| #ifdef CONFIG_OF |
| struct device_node *dp = pci_device_to_OF_node(adapter->pdev); |
| struct ixgbe_hw *hw = &adapter->hw; |
| const unsigned char *addr; |
| |
| addr = of_get_mac_address(dp); |
| if (addr) { |
| ether_addr_copy(hw->mac.perm_addr, addr); |
| return; |
| } |
| #endif /* CONFIG_OF */ |
| |
| #ifdef CONFIG_SPARC |
| ether_addr_copy(hw->mac.perm_addr, idprom->id_ethaddr); |
| #endif /* CONFIG_SPARC */ |
| } |
| |
| /** |
| * ixgbe_probe - Device Initialization Routine |
| * @pdev: PCI device information struct |
| * @ent: entry in ixgbe_pci_tbl |
| * |
| * Returns 0 on success, negative on failure |
| * |
| * ixgbe_probe initializes an adapter identified by a pci_dev structure. |
| * The OS initialization, configuring of the adapter private structure, |
| * and a hardware reset occur. |
| **/ |
| static int ixgbe_probe(struct pci_dev *pdev, const struct pci_device_id *ent) |
| { |
| struct net_device *netdev; |
| struct ixgbe_adapter *adapter = NULL; |
| struct ixgbe_hw *hw; |
| const struct ixgbe_info *ii = ixgbe_info_tbl[ent->driver_data]; |
| int i, err, pci_using_dac, expected_gts; |
| unsigned int indices = MAX_TX_QUEUES; |
| u8 part_str[IXGBE_PBANUM_LENGTH]; |
| bool disable_dev = false; |
| #ifdef IXGBE_FCOE |
| u16 device_caps; |
| #endif |
| u32 eec; |
| |
| /* Catch broken hardware that put the wrong VF device ID in |
| * the PCIe SR-IOV capability. |
| */ |
| if (pdev->is_virtfn) { |
| WARN(1, KERN_ERR "%s (%hx:%hx) should not be a VF!\n", |
| pci_name(pdev), pdev->vendor, pdev->device); |
| return -EINVAL; |
| } |
| |
| err = pci_enable_device_mem(pdev); |
| if (err) |
| return err; |
| |
| if (!dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64))) { |
| pci_using_dac = 1; |
| } else { |
| err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); |
| if (err) { |
| dev_err(&pdev->dev, |
| "No usable DMA configuration, aborting\n"); |
| goto err_dma; |
| } |
| pci_using_dac = 0; |
| } |
| |
| err = pci_request_selected_regions(pdev, pci_select_bars(pdev, |
| IORESOURCE_MEM), ixgbe_driver_name); |
| if (err) { |
| dev_err(&pdev->dev, |
| "pci_request_selected_regions failed 0x%x\n", err); |
| goto err_pci_reg; |
| } |
| |
| pci_enable_pcie_error_reporting(pdev); |
| |
| pci_set_master(pdev); |
| pci_save_state(pdev); |
| |
| if (ii->mac == ixgbe_mac_82598EB) { |
| #ifdef CONFIG_IXGBE_DCB |
| /* 8 TC w/ 4 queues per TC */ |
| indices = 4 * MAX_TRAFFIC_CLASS; |
| #else |
| indices = IXGBE_MAX_RSS_INDICES; |
| #endif |
| } |
| |
| netdev = alloc_etherdev_mq(sizeof(struct ixgbe_adapter), indices); |
| if (!netdev) { |
| err = -ENOMEM; |
| goto err_alloc_etherdev; |
| } |
| |
| SET_NETDEV_DEV(netdev, &pdev->dev); |
| |
| adapter = netdev_priv(netdev); |
| |
| adapter->netdev = netdev; |
| adapter->pdev = pdev; |
| hw = &adapter->hw; |
| hw->back = adapter; |
| adapter->msg_enable = netif_msg_init(debug, DEFAULT_MSG_ENABLE); |
| |
| hw->hw_addr = ioremap(pci_resource_start(pdev, 0), |
| pci_resource_len(pdev, 0)); |
| adapter->io_addr = hw->hw_addr; |
| if (!hw->hw_addr) { |
| err = -EIO; |
| goto err_ioremap; |
| } |
| |
| netdev->netdev_ops = &ixgbe_netdev_ops; |
| ixgbe_set_ethtool_ops(netdev); |
| netdev->watchdog_timeo = 5 * HZ; |
| strlcpy(netdev->name, pci_name(pdev), sizeof(netdev->name)); |
| |
| /* Setup hw api */ |
| memcpy(&hw->mac.ops, ii->mac_ops, sizeof(hw->mac.ops)); |
| hw->mac.type = ii->mac; |
| hw->mvals = ii->mvals; |
| |
| /* EEPROM */ |
| memcpy(&hw->eeprom.ops, ii->eeprom_ops, sizeof(hw->eeprom.ops)); |
| eec = IXGBE_READ_REG(hw, IXGBE_EEC(hw)); |
| if (ixgbe_removed(hw->hw_addr)) { |
| err = -EIO; |
| goto err_ioremap; |
| } |
| /* If EEPROM is valid (bit 8 = 1), use default otherwise use bit bang */ |
| if (!(eec & (1 << 8))) |
| hw->eeprom.ops.read = &ixgbe_read_eeprom_bit_bang_generic; |
| |
| /* PHY */ |
| memcpy(&hw->phy.ops, ii->phy_ops, sizeof(hw->phy.ops)); |
| hw->phy.sfp_type = ixgbe_sfp_type_unknown; |
| /* ixgbe_identify_phy_generic will set prtad and mmds properly */ |
| hw->phy.mdio.prtad = MDIO_PRTAD_NONE; |
| hw->phy.mdio.mmds = 0; |
| hw->phy.mdio.mode_support = MDIO_SUPPORTS_C45 | MDIO_EMULATE_C22; |
| hw->phy.mdio.dev = netdev; |
| hw->phy.mdio.mdio_read = ixgbe_mdio_read; |
| hw->phy.mdio.mdio_write = ixgbe_mdio_write; |
| |
| ii->get_invariants(hw); |
| |
| /* setup the private structure */ |
| err = ixgbe_sw_init(adapter); |
| if (err) |
| goto err_sw_init; |
| |
| /* Make it possible the adapter to be woken up via WOL */ |
| switch (adapter->hw.mac.type) { |
| case ixgbe_mac_82599EB: |
| case ixgbe_mac_X540: |
| case ixgbe_mac_X550: |
| case ixgbe_mac_X550EM_x: |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_WUS, ~0); |
| break; |
| default: |
| break; |
| } |
| |
| /* |
| * If there is a fan on this device and it has failed log the |
| * failure. |
| */ |
| if (adapter->flags & IXGBE_FLAG_FAN_FAIL_CAPABLE) { |
| u32 esdp = IXGBE_READ_REG(hw, IXGBE_ESDP); |
| if (esdp & IXGBE_ESDP_SDP1) |
| e_crit(probe, "Fan has stopped, replace the adapter\n"); |
| } |
| |
| if (allow_unsupported_sfp) |
| hw->allow_unsupported_sfp = allow_unsupported_sfp; |
| |
| /* reset_hw fills in the perm_addr as well */ |
| hw->phy.reset_if_overtemp = true; |
| err = hw->mac.ops.reset_hw(hw); |
| hw->phy.reset_if_overtemp = false; |
| if (err == IXGBE_ERR_SFP_NOT_PRESENT) { |
| err = 0; |
| } else if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) { |
| e_dev_err("failed to load because an unsupported SFP+ or QSFP module type was detected.\n"); |
| e_dev_err("Reload the driver after installing a supported module.\n"); |
| goto err_sw_init; |
| } else if (err) { |
| e_dev_err("HW Init failed: %d\n", err); |
| goto err_sw_init; |
| } |
| |
| #ifdef CONFIG_PCI_IOV |
| /* SR-IOV not supported on the 82598 */ |
| if (adapter->hw.mac.type == ixgbe_mac_82598EB) |
| goto skip_sriov; |
| /* Mailbox */ |
| ixgbe_init_mbx_params_pf(hw); |
| memcpy(&hw->mbx.ops, ii->mbx_ops, sizeof(hw->mbx.ops)); |
| pci_sriov_set_totalvfs(pdev, IXGBE_MAX_VFS_DRV_LIMIT); |
| ixgbe_enable_sriov(adapter); |
| skip_sriov: |
| |
| #endif |
| netdev->features = NETIF_F_SG | |
| NETIF_F_IP_CSUM | |
| NETIF_F_IPV6_CSUM | |
| NETIF_F_HW_VLAN_CTAG_TX | |
| NETIF_F_HW_VLAN_CTAG_RX | |
| NETIF_F_TSO | |
| NETIF_F_TSO6 | |
| NETIF_F_RXHASH | |
| NETIF_F_RXCSUM; |
| |
| netdev->hw_features = netdev->features | NETIF_F_HW_L2FW_DOFFLOAD; |
| |
| switch (adapter->hw.mac.type) { |
| case ixgbe_mac_82599EB: |
| case ixgbe_mac_X540: |
| case ixgbe_mac_X550: |
| case ixgbe_mac_X550EM_x: |
| netdev->features |= NETIF_F_SCTP_CRC; |
| netdev->hw_features |= NETIF_F_SCTP_CRC | |
| NETIF_F_NTUPLE | |
| NETIF_F_HW_TC; |
| break; |
| default: |
| break; |
| } |
| |
| netdev->hw_features |= NETIF_F_RXALL; |
| netdev->features |= NETIF_F_HW_VLAN_CTAG_FILTER; |
| |
| netdev->vlan_features |= NETIF_F_TSO; |
| netdev->vlan_features |= NETIF_F_TSO6; |
| netdev->vlan_features |= NETIF_F_IP_CSUM; |
| netdev->vlan_features |= NETIF_F_IPV6_CSUM; |
| netdev->vlan_features |= NETIF_F_SG; |
| |
| netdev->hw_enc_features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM; |
| |
| netdev->priv_flags |= IFF_UNICAST_FLT; |
| netdev->priv_flags |= IFF_SUPP_NOFCS; |
| |
| #ifdef CONFIG_IXGBE_DCB |
| netdev->dcbnl_ops = &dcbnl_ops; |
| #endif |
| |
| #ifdef IXGBE_FCOE |
| if (adapter->flags & IXGBE_FLAG_FCOE_CAPABLE) { |
| unsigned int fcoe_l; |
| |
| if (hw->mac.ops.get_device_caps) { |
| hw->mac.ops.get_device_caps(hw, &device_caps); |
| if (device_caps & IXGBE_DEVICE_CAPS_FCOE_OFFLOADS) |
| adapter->flags &= ~IXGBE_FLAG_FCOE_CAPABLE; |
| } |
| |
| |
| fcoe_l = min_t(int, IXGBE_FCRETA_SIZE, num_online_cpus()); |
| adapter->ring_feature[RING_F_FCOE].limit = fcoe_l; |
| |
| netdev->features |= NETIF_F_FSO | |
| NETIF_F_FCOE_CRC; |
| |
| netdev->vlan_features |= NETIF_F_FSO | |
| NETIF_F_FCOE_CRC | |
| NETIF_F_FCOE_MTU; |
| } |
| #endif /* IXGBE_FCOE */ |
| if (pci_using_dac) { |
| netdev->features |= NETIF_F_HIGHDMA; |
| netdev->vlan_features |= NETIF_F_HIGHDMA; |
| } |
| |
| if (adapter->flags2 & IXGBE_FLAG2_RSC_CAPABLE) |
| netdev->hw_features |= NETIF_F_LRO; |
| if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) |
| netdev->features |= NETIF_F_LRO; |
| |
| /* make sure the EEPROM is good */ |
| if (hw->eeprom.ops.validate_checksum(hw, NULL) < 0) { |
| e_dev_err("The EEPROM Checksum Is Not Valid\n"); |
| err = -EIO; |
| goto err_sw_init; |
| } |
| |
| ixgbe_get_platform_mac_addr(adapter); |
| |
| memcpy(netdev->dev_addr, hw->mac.perm_addr, netdev->addr_len); |
| |
| if (!is_valid_ether_addr(netdev->dev_addr)) { |
| e_dev_err("invalid MAC address\n"); |
| err = -EIO; |
| goto err_sw_init; |
| } |
| |
| /* Set hw->mac.addr to permanent MAC address */ |
| ether_addr_copy(hw->mac.addr, hw->mac.perm_addr); |
| ixgbe_mac_set_default_filter(adapter); |
| |
| setup_timer(&adapter->service_timer, &ixgbe_service_timer, |
| (unsigned long) adapter); |
| |
| if (ixgbe_removed(hw->hw_addr)) { |
| err = -EIO; |
| goto err_sw_init; |
| } |
| INIT_WORK(&adapter->service_task, ixgbe_service_task); |
| set_bit(__IXGBE_SERVICE_INITED, &adapter->state); |
| clear_bit(__IXGBE_SERVICE_SCHED, &adapter->state); |
| |
| err = ixgbe_init_interrupt_scheme(adapter); |
| if (err) |
| goto err_sw_init; |
| |
| /* WOL not supported for all devices */ |
| adapter->wol = 0; |
| hw->eeprom.ops.read(hw, 0x2c, &adapter->eeprom_cap); |
| hw->wol_enabled = ixgbe_wol_supported(adapter, pdev->device, |
| pdev->subsystem_device); |
| if (hw->wol_enabled) |
| adapter->wol = IXGBE_WUFC_MAG; |
| |
| device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol); |
| |
| /* save off EEPROM version number */ |
| hw->eeprom.ops.read(hw, 0x2e, &adapter->eeprom_verh); |
| hw->eeprom.ops.read(hw, 0x2d, &adapter->eeprom_verl); |
| |
| /* pick up the PCI bus settings for reporting later */ |
| if (ixgbe_pcie_from_parent(hw)) |
| ixgbe_get_parent_bus_info(adapter); |
| else |
| hw->mac.ops.get_bus_info(hw); |
| |
| /* calculate the expected PCIe bandwidth required for optimal |
| * performance. Note that some older parts will never have enough |
| * bandwidth due to being older generation PCIe parts. We clamp these |
| * parts to ensure no warning is displayed if it can't be fixed. |
| */ |
| switch (hw->mac.type) { |
| case ixgbe_mac_82598EB: |
| expected_gts = min(ixgbe_enumerate_functions(adapter) * 10, 16); |
| break; |
| default: |
| expected_gts = ixgbe_enumerate_functions(adapter) * 10; |
| break; |
| } |
| |
| /* don't check link if we failed to enumerate functions */ |
| if (expected_gts > 0) |
| ixgbe_check_minimum_link(adapter, expected_gts); |
| |
| err = ixgbe_read_pba_string_generic(hw, part_str, sizeof(part_str)); |
| if (err) |
| strlcpy(part_str, "Unknown", sizeof(part_str)); |
| if (ixgbe_is_sfp(hw) && hw->phy.sfp_type != ixgbe_sfp_type_not_present) |
| e_dev_info("MAC: %d, PHY: %d, SFP+: %d, PBA No: %s\n", |
| hw->mac.type, hw->phy.type, hw->phy.sfp_type, |
| part_str); |
| else |
| e_dev_info("MAC: %d, PHY: %d, PBA No: %s\n", |
| hw->mac.type, hw->phy.type, part_str); |
| |
| e_dev_info("%pM\n", netdev->dev_addr); |
| |
| /* reset the hardware with the new settings */ |
| err = hw->mac.ops.start_hw(hw); |
| if (err == IXGBE_ERR_EEPROM_VERSION) { |
| /* We are running on a pre-production device, log a warning */ |
| e_dev_warn("This device is a pre-production adapter/LOM. " |
| "Please be aware there may be issues associated " |
| "with your hardware. If you are experiencing " |
| "problems please contact your Intel or hardware " |
| "representative who provided you with this " |
| "hardware.\n"); |
| } |
| strcpy(netdev->name, "eth%d"); |
| err = register_netdev(netdev); |
| if (err) |
| goto err_register; |
| |
| pci_set_drvdata(pdev, adapter); |
| |
| /* power down the optics for 82599 SFP+ fiber */ |
| if (hw->mac.ops.disable_tx_laser) |
| hw->mac.ops.disable_tx_laser(hw); |
| |
| /* carrier off reporting is important to ethtool even BEFORE open */ |
| netif_carrier_off(netdev); |
| |
| #ifdef CONFIG_IXGBE_DCA |
| if (dca_add_requester(&pdev->dev) == 0) { |
| adapter->flags |= IXGBE_FLAG_DCA_ENABLED; |
| ixgbe_setup_dca(adapter); |
| } |
| #endif |
| if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) { |
| e_info(probe, "IOV is enabled with %d VFs\n", adapter->num_vfs); |
| for (i = 0; i < adapter->num_vfs; i++) |
| ixgbe_vf_configuration(pdev, (i | 0x10000000)); |
| } |
| |
| /* firmware requires driver version to be 0xFFFFFFFF |
| * since os does not support feature |
| */ |
| if (hw->mac.ops.set_fw_drv_ver) |
| hw->mac.ops.set_fw_drv_ver(hw, 0xFF, 0xFF, 0xFF, |
| 0xFF); |
| |
| /* add san mac addr to netdev */ |
| ixgbe_add_sanmac_netdev(netdev); |
| |
| e_dev_info("%s\n", ixgbe_default_device_descr); |
| |
| #ifdef CONFIG_IXGBE_HWMON |
| if (ixgbe_sysfs_init(adapter)) |
| e_err(probe, "failed to allocate sysfs resources\n"); |
| #endif /* CONFIG_IXGBE_HWMON */ |
| |
| ixgbe_dbg_adapter_init(adapter); |
| |
| /* setup link for SFP devices with MNG FW, else wait for IXGBE_UP */ |
| if (ixgbe_mng_enabled(hw) && ixgbe_is_sfp(hw) && hw->mac.ops.setup_link) |
| hw->mac.ops.setup_link(hw, |
| IXGBE_LINK_SPEED_10GB_FULL | IXGBE_LINK_SPEED_1GB_FULL, |
| true); |
| |
| return 0; |
| |
| err_register: |
| ixgbe_release_hw_control(adapter); |
| ixgbe_clear_interrupt_scheme(adapter); |
| err_sw_init: |
| ixgbe_disable_sriov(adapter); |
| adapter->flags2 &= ~IXGBE_FLAG2_SEARCH_FOR_SFP; |
| iounmap(adapter->io_addr); |
| kfree(adapter->mac_table); |
| err_ioremap: |
| disable_dev = !test_and_set_bit(__IXGBE_DISABLED, &adapter->state); |
| free_netdev(netdev); |
| err_alloc_etherdev: |
| pci_release_selected_regions(pdev, |
| pci_select_bars(pdev, IORESOURCE_MEM)); |
| err_pci_reg: |
| err_dma: |
| if (!adapter || disable_dev) |
| pci_disable_device(pdev); |
| return err; |
| } |
| |
| /** |
| * ixgbe_remove - Device Removal Routine |
| * @pdev: PCI device information struct |
| * |
| * ixgbe_remove is called by the PCI subsystem to alert the driver |
| * that it should release a PCI device. The could be caused by a |
| * Hot-Plug event, or because the driver is going to be removed from |
| * memory. |
| **/ |
| static void ixgbe_remove(struct pci_dev *pdev) |
| { |
| struct ixgbe_adapter *adapter = pci_get_drvdata(pdev); |
| struct net_device *netdev; |
| bool disable_dev; |
| |
| /* if !adapter then we already cleaned up in probe */ |
| if (!adapter) |
| return; |
| |
| netdev = adapter->netdev; |
| ixgbe_dbg_adapter_exit(adapter); |
| |
| set_bit(__IXGBE_REMOVING, &adapter->state); |
| cancel_work_sync(&adapter->service_task); |
| |
| |
| #ifdef CONFIG_IXGBE_DCA |
| if (adapter->flags & IXGBE_FLAG_DCA_ENABLED) { |
| adapter->flags &= ~IXGBE_FLAG_DCA_ENABLED; |
| dca_remove_requester(&pdev->dev); |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_CTRL, |
| IXGBE_DCA_CTRL_DCA_DISABLE); |
| } |
| |
| #endif |
| #ifdef CONFIG_IXGBE_HWMON |
| ixgbe_sysfs_exit(adapter); |
| #endif /* CONFIG_IXGBE_HWMON */ |
| |
| /* remove the added san mac */ |
| ixgbe_del_sanmac_netdev(netdev); |
| |
| #ifdef CONFIG_PCI_IOV |
| ixgbe_disable_sriov(adapter); |
| #endif |
| if (netdev->reg_state == NETREG_REGISTERED) |
| unregister_netdev(netdev); |
| |
| ixgbe_clear_interrupt_scheme(adapter); |
| |
| ixgbe_release_hw_control(adapter); |
| |
| #ifdef CONFIG_DCB |
| kfree(adapter->ixgbe_ieee_pfc); |
| kfree(adapter->ixgbe_ieee_ets); |
| |
| #endif |
| iounmap(adapter->io_addr); |
| pci_release_selected_regions(pdev, pci_select_bars(pdev, |
| IORESOURCE_MEM)); |
| |
| e_dev_info("complete\n"); |
| |
| kfree(adapter->mac_table); |
| disable_dev = !test_and_set_bit(__IXGBE_DISABLED, &adapter->state); |
| free_netdev(netdev); |
| |
| pci_disable_pcie_error_reporting(pdev); |
| |
| if (disable_dev) |
| pci_disable_device(pdev); |
| } |
| |
| /** |
| * ixgbe_io_error_detected - called when PCI error is detected |
| * @pdev: Pointer to PCI device |
| * @state: The current pci connection state |
| * |
| * This function is called after a PCI bus error affecting |
| * this device has been detected. |
| */ |
| static pci_ers_result_t ixgbe_io_error_detected(struct pci_dev *pdev, |
| pci_channel_state_t state) |
| { |
| struct ixgbe_adapter *adapter = pci_get_drvdata(pdev); |
| struct net_device *netdev = adapter->netdev; |
| |
| #ifdef CONFIG_PCI_IOV |
| struct ixgbe_hw *hw = &adapter->hw; |
| struct pci_dev *bdev, *vfdev; |
| u32 dw0, dw1, dw2, dw3; |
| int vf, pos; |
| u16 req_id, pf_func; |
| |
| if (adapter->hw.mac.type == ixgbe_mac_82598EB || |
| adapter->num_vfs == 0) |
| goto skip_bad_vf_detection; |
| |
| bdev = pdev->bus->self; |
| while (bdev && (pci_pcie_type(bdev) != PCI_EXP_TYPE_ROOT_PORT)) |
| bdev = bdev->bus->self; |
| |
| if (!bdev) |
| goto skip_bad_vf_detection; |
| |
| pos = pci_find_ext_capability(bdev, PCI_EXT_CAP_ID_ERR); |
| if (!pos) |
| goto skip_bad_vf_detection; |
| |
| dw0 = ixgbe_read_pci_cfg_dword(hw, pos + PCI_ERR_HEADER_LOG); |
| dw1 = ixgbe_read_pci_cfg_dword(hw, pos + PCI_ERR_HEADER_LOG + 4); |
| dw2 = ixgbe_read_pci_cfg_dword(hw, pos + PCI_ERR_HEADER_LOG + 8); |
| dw3 = ixgbe_read_pci_cfg_dword(hw, pos + PCI_ERR_HEADER_LOG + 12); |
| if (ixgbe_removed(hw->hw_addr)) |
| goto skip_bad_vf_detection; |
| |
| req_id = dw1 >> 16; |
| /* On the 82599 if bit 7 of the requestor ID is set then it's a VF */ |
| if (!(req_id & 0x0080)) |
| goto skip_bad_vf_detection; |
| |
| pf_func = req_id & 0x01; |
| if ((pf_func & 1) == (pdev->devfn & 1)) { |
| unsigned int device_id; |
| |
| vf = (req_id & 0x7F) >> 1; |
| e_dev_err("VF %d has caused a PCIe error\n", vf); |
| e_dev_err("TLP: dw0: %8.8x\tdw1: %8.8x\tdw2: " |
| "%8.8x\tdw3: %8.8x\n", |
| dw0, dw1, dw2, dw3); |
| switch (adapter->hw.mac.type) { |
| case ixgbe_mac_82599EB: |
| device_id = IXGBE_82599_VF_DEVICE_ID; |
| break; |
| case ixgbe_mac_X540: |
| device_id = IXGBE_X540_VF_DEVICE_ID; |
| break; |
| case ixgbe_mac_X550: |
| device_id = IXGBE_DEV_ID_X550_VF; |
| break; |
| case ixgbe_mac_X550EM_x: |
| device_id = IXGBE_DEV_ID_X550EM_X_VF; |
| break; |
| default: |
| device_id = 0; |
| break; |
| } |
| |
| /* Find the pci device of the offending VF */ |
| vfdev = pci_get_device(PCI_VENDOR_ID_INTEL, device_id, NULL); |
| while (vfdev) { |
| if (vfdev->devfn == (req_id & 0xFF)) |
| break; |
| vfdev = pci_get_device(PCI_VENDOR_ID_INTEL, |
| device_id, vfdev); |
| } |
| /* |
| * There's a slim chance the VF could have been hot plugged, |
| * so if it is no longer present we don't need to issue the |
| * VFLR. Just clean up the AER in that case. |
| */ |
| if (vfdev) { |
| ixgbe_issue_vf_flr(adapter, vfdev); |
| /* Free device reference count */ |
| pci_dev_put(vfdev); |
| } |
| |
| pci_cleanup_aer_uncorrect_error_status(pdev); |
| } |
| |
| /* |
| * Even though the error may have occurred on the other port |
| * we still need to increment the vf error reference count for |
| * both ports because the I/O resume function will be called |
| * for both of them. |
| */ |
| adapter->vferr_refcount++; |
| |
| return PCI_ERS_RESULT_RECOVERED; |
| |
| skip_bad_vf_detection: |
| #endif /* CONFIG_PCI_IOV */ |
| if (!test_bit(__IXGBE_SERVICE_INITED, &adapter->state)) |
| return PCI_ERS_RESULT_DISCONNECT; |
| |
| rtnl_lock(); |
| netif_device_detach(netdev); |
| |
| if (state == pci_channel_io_perm_failure) { |
| rtnl_unlock(); |
| return PCI_ERS_RESULT_DISCONNECT; |
| } |
| |
| if (netif_running(netdev)) |
| ixgbe_down(adapter); |
| |
| if (!test_and_set_bit(__IXGBE_DISABLED, &adapter->state)) |
| pci_disable_device(pdev); |
| rtnl_unlock(); |
| |
| /* Request a slot reset. */ |
| return PCI_ERS_RESULT_NEED_RESET; |
| } |
| |
| /** |
| * ixgbe_io_slot_reset - called after the pci bus has been reset. |
| * @pdev: Pointer to PCI device |
| * |
| * Restart the card from scratch, as if from a cold-boot. |
| */ |
| static pci_ers_result_t ixgbe_io_slot_reset(struct pci_dev *pdev) |
| { |
| struct ixgbe_adapter *adapter = pci_get_drvdata(pdev); |
| pci_ers_result_t result; |
| int err; |
| |
| if (pci_enable_device_mem(pdev)) { |
| e_err(probe, "Cannot re-enable PCI device after reset.\n"); |
| result = PCI_ERS_RESULT_DISCONNECT; |
| } else { |
| smp_mb__before_atomic(); |
| clear_bit(__IXGBE_DISABLED, &adapter->state); |
| adapter->hw.hw_addr = adapter->io_addr; |
| pci_set_master(pdev); |
| pci_restore_state(pdev); |
| pci_save_state(pdev); |
| |
| pci_wake_from_d3(pdev, false); |
| |
| ixgbe_reset(adapter); |
| IXGBE_WRITE_REG(&adapter->hw, IXGBE_WUS, ~0); |
| result = PCI_ERS_RESULT_RECOVERED; |
| } |
| |
| err = pci_cleanup_aer_uncorrect_error_status(pdev); |
| if (err) { |
| e_dev_err("pci_cleanup_aer_uncorrect_error_status " |
| "failed 0x%0x\n", err); |
| /* non-fatal, continue */ |
| } |
| |
| return result; |
| } |
| |
| /** |
| * ixgbe_io_resume - called when traffic can start flowing again. |
| * @pdev: Pointer to PCI device |
| * |
| * This callback is called when the error recovery driver tells us that |
| * its OK to resume normal operation. |
| */ |
| static void ixgbe_io_resume(struct pci_dev *pdev) |
| { |
| struct ixgbe_adapter *adapter = pci_get_drvdata(pdev); |
| struct net_device *netdev = adapter->netdev; |
| |
| #ifdef CONFIG_PCI_IOV |
| if (adapter->vferr_refcount) { |
| e_info(drv, "Resuming after VF err\n"); |
| adapter->vferr_refcount--; |
| return; |
| } |
| |
| #endif |
| if (netif_running(netdev)) |
| ixgbe_up(adapter); |
| |
| netif_device_attach(netdev); |
| } |
| |
| static const struct pci_error_handlers ixgbe_err_handler = { |
| .error_detected = ixgbe_io_error_detected, |
| .slot_reset = ixgbe_io_slot_reset, |
| .resume = ixgbe_io_resume, |
| }; |
| |
| static struct pci_driver ixgbe_driver = { |
| .name = ixgbe_driver_name, |
| .id_table = ixgbe_pci_tbl, |
| .probe = ixgbe_probe, |
| .remove = ixgbe_remove, |
| #ifdef CONFIG_PM |
| .suspend = ixgbe_suspend, |
| .resume = ixgbe_resume, |
| #endif |
| .shutdown = ixgbe_shutdown, |
| .sriov_configure = ixgbe_pci_sriov_configure, |
| .err_handler = &ixgbe_err_handler |
| }; |
| |
| /** |
| * ixgbe_init_module - Driver Registration Routine |
| * |
| * ixgbe_init_module is the first routine called when the driver is |
| * loaded. All it does is register with the PCI subsystem. |
| **/ |
| static int __init ixgbe_init_module(void) |
| { |
| int ret; |
| pr_info("%s - version %s\n", ixgbe_driver_string, ixgbe_driver_version); |
| pr_info("%s\n", ixgbe_copyright); |
| |
| ixgbe_wq = create_singlethread_workqueue(ixgbe_driver_name); |
| if (!ixgbe_wq) { |
| pr_err("%s: Failed to create workqueue\n", ixgbe_driver_name); |
| return -ENOMEM; |
| } |
| |
| ixgbe_dbg_init(); |
| |
| ret = pci_register_driver(&ixgbe_driver); |
| if (ret) { |
| ixgbe_dbg_exit(); |
| return ret; |
| } |
| |
| #ifdef CONFIG_IXGBE_DCA |
| dca_register_notify(&dca_notifier); |
| #endif |
| |
| return 0; |
| } |
| |
| module_init(ixgbe_init_module); |
| |
| /** |
| * ixgbe_exit_module - Driver Exit Cleanup Routine |
| * |
| * ixgbe_exit_module is called just before the driver is removed |
| * from memory. |
| **/ |
| static void __exit ixgbe_exit_module(void) |
| { |
| #ifdef CONFIG_IXGBE_DCA |
| dca_unregister_notify(&dca_notifier); |
| #endif |
| pci_unregister_driver(&ixgbe_driver); |
| |
| ixgbe_dbg_exit(); |
| if (ixgbe_wq) { |
| destroy_workqueue(ixgbe_wq); |
| ixgbe_wq = NULL; |
| } |
| } |
| |
| #ifdef CONFIG_IXGBE_DCA |
| static int ixgbe_notify_dca(struct notifier_block *nb, unsigned long event, |
| void *p) |
| { |
| int ret_val; |
| |
| ret_val = driver_for_each_device(&ixgbe_driver.driver, NULL, &event, |
| __ixgbe_notify_dca); |
| |
| return ret_val ? NOTIFY_BAD : NOTIFY_DONE; |
| } |
| |
| #endif /* CONFIG_IXGBE_DCA */ |
| |
| module_exit(ixgbe_exit_module); |
| |
| /* ixgbe_main.c */ |