| /* |
| * Copyright (C) 2000-2002 Michael Cornwell <cornwell@acm.org> |
| * Copyright (C) 2000-2002 Andre Hedrick <andre@linux-ide.org> |
| * Copyright (C) 2001-2002 Klaus Smolin |
| * IBM Storage Technology Division |
| * Copyright (C) 2003-2004, 2007 Bartlomiej Zolnierkiewicz |
| * |
| * The big the bad and the ugly. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/types.h> |
| #include <linux/string.h> |
| #include <linux/kernel.h> |
| #include <linux/timer.h> |
| #include <linux/mm.h> |
| #include <linux/sched.h> |
| #include <linux/interrupt.h> |
| #include <linux/major.h> |
| #include <linux/errno.h> |
| #include <linux/genhd.h> |
| #include <linux/blkpg.h> |
| #include <linux/slab.h> |
| #include <linux/pci.h> |
| #include <linux/delay.h> |
| #include <linux/hdreg.h> |
| #include <linux/ide.h> |
| #include <linux/bitops.h> |
| #include <linux/scatterlist.h> |
| |
| #include <asm/byteorder.h> |
| #include <asm/irq.h> |
| #include <asm/uaccess.h> |
| #include <asm/io.h> |
| |
| void ide_tf_load(ide_drive_t *drive, ide_task_t *task) |
| { |
| ide_hwif_t *hwif = drive->hwif; |
| struct ide_taskfile *tf = &task->tf; |
| u8 HIHI = (task->tf_flags & IDE_TFLAG_LBA48) ? 0xE0 : 0xEF; |
| |
| if (task->tf_flags & IDE_TFLAG_FLAGGED) |
| HIHI = 0xFF; |
| |
| #ifdef DEBUG |
| printk("%s: tf: feat 0x%02x nsect 0x%02x lbal 0x%02x " |
| "lbam 0x%02x lbah 0x%02x dev 0x%02x cmd 0x%02x\n", |
| drive->name, tf->feature, tf->nsect, tf->lbal, |
| tf->lbam, tf->lbah, tf->device, tf->command); |
| printk("%s: hob: nsect 0x%02x lbal 0x%02x " |
| "lbam 0x%02x lbah 0x%02x\n", |
| drive->name, tf->hob_nsect, tf->hob_lbal, |
| tf->hob_lbam, tf->hob_lbah); |
| #endif |
| |
| ide_set_irq(drive, 1); |
| |
| if ((task->tf_flags & IDE_TFLAG_NO_SELECT_MASK) == 0) |
| SELECT_MASK(drive, 0); |
| |
| if (task->tf_flags & IDE_TFLAG_OUT_DATA) |
| hwif->OUTW((tf->hob_data << 8) | tf->data, IDE_DATA_REG); |
| |
| if (task->tf_flags & IDE_TFLAG_OUT_HOB_FEATURE) |
| hwif->OUTB(tf->hob_feature, IDE_FEATURE_REG); |
| if (task->tf_flags & IDE_TFLAG_OUT_HOB_NSECT) |
| hwif->OUTB(tf->hob_nsect, IDE_NSECTOR_REG); |
| if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAL) |
| hwif->OUTB(tf->hob_lbal, IDE_SECTOR_REG); |
| if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAM) |
| hwif->OUTB(tf->hob_lbam, IDE_LCYL_REG); |
| if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAH) |
| hwif->OUTB(tf->hob_lbah, IDE_HCYL_REG); |
| |
| if (task->tf_flags & IDE_TFLAG_OUT_FEATURE) |
| hwif->OUTB(tf->feature, IDE_FEATURE_REG); |
| if (task->tf_flags & IDE_TFLAG_OUT_NSECT) |
| hwif->OUTB(tf->nsect, IDE_NSECTOR_REG); |
| if (task->tf_flags & IDE_TFLAG_OUT_LBAL) |
| hwif->OUTB(tf->lbal, IDE_SECTOR_REG); |
| if (task->tf_flags & IDE_TFLAG_OUT_LBAM) |
| hwif->OUTB(tf->lbam, IDE_LCYL_REG); |
| if (task->tf_flags & IDE_TFLAG_OUT_LBAH) |
| hwif->OUTB(tf->lbah, IDE_HCYL_REG); |
| |
| if (task->tf_flags & IDE_TFLAG_OUT_DEVICE) |
| hwif->OUTB((tf->device & HIHI) | drive->select.all, IDE_SELECT_REG); |
| } |
| |
| int taskfile_lib_get_identify (ide_drive_t *drive, u8 *buf) |
| { |
| ide_task_t args; |
| |
| memset(&args, 0, sizeof(ide_task_t)); |
| args.tf.nsect = 0x01; |
| if (drive->media == ide_disk) |
| args.tf.command = WIN_IDENTIFY; |
| else |
| args.tf.command = WIN_PIDENTIFY; |
| args.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE; |
| args.data_phase = TASKFILE_IN; |
| return ide_raw_taskfile(drive, &args, buf, 1); |
| } |
| |
| static int inline task_dma_ok(ide_task_t *task) |
| { |
| if (blk_fs_request(task->rq) || (task->tf_flags & IDE_TFLAG_FLAGGED)) |
| return 1; |
| |
| switch (task->tf.command) { |
| case WIN_WRITEDMA_ONCE: |
| case WIN_WRITEDMA: |
| case WIN_WRITEDMA_EXT: |
| case WIN_READDMA_ONCE: |
| case WIN_READDMA: |
| case WIN_READDMA_EXT: |
| case WIN_IDENTIFY_DMA: |
| return 1; |
| } |
| |
| return 0; |
| } |
| |
| static ide_startstop_t task_no_data_intr(ide_drive_t *); |
| static ide_startstop_t set_geometry_intr(ide_drive_t *); |
| static ide_startstop_t recal_intr(ide_drive_t *); |
| static ide_startstop_t set_multmode_intr(ide_drive_t *); |
| static ide_startstop_t pre_task_out_intr(ide_drive_t *, struct request *); |
| static ide_startstop_t task_in_intr(ide_drive_t *); |
| |
| ide_startstop_t do_rw_taskfile (ide_drive_t *drive, ide_task_t *task) |
| { |
| ide_hwif_t *hwif = HWIF(drive); |
| struct ide_taskfile *tf = &task->tf; |
| ide_handler_t *handler = NULL; |
| |
| if (task->data_phase == TASKFILE_MULTI_IN || |
| task->data_phase == TASKFILE_MULTI_OUT) { |
| if (!drive->mult_count) { |
| printk(KERN_ERR "%s: multimode not set!\n", |
| drive->name); |
| return ide_stopped; |
| } |
| } |
| |
| if (task->tf_flags & IDE_TFLAG_FLAGGED) |
| task->tf_flags |= IDE_TFLAG_FLAGGED_SET_IN_FLAGS; |
| |
| if ((task->tf_flags & IDE_TFLAG_DMA_PIO_FALLBACK) == 0) |
| ide_tf_load(drive, task); |
| |
| switch (task->data_phase) { |
| case TASKFILE_MULTI_OUT: |
| case TASKFILE_OUT: |
| hwif->OUTBSYNC(drive, tf->command, IDE_COMMAND_REG); |
| ndelay(400); /* FIXME */ |
| return pre_task_out_intr(drive, task->rq); |
| case TASKFILE_MULTI_IN: |
| case TASKFILE_IN: |
| handler = task_in_intr; |
| /* fall-through */ |
| case TASKFILE_NO_DATA: |
| if (handler == NULL) |
| handler = task_no_data_intr; |
| /* WIN_{SPECIFY,RESTORE,SETMULT} use custom handlers */ |
| if (task->tf_flags & IDE_TFLAG_CUSTOM_HANDLER) { |
| switch (tf->command) { |
| case WIN_SPECIFY: handler = set_geometry_intr; break; |
| case WIN_RESTORE: handler = recal_intr; break; |
| case WIN_SETMULT: handler = set_multmode_intr; break; |
| } |
| } |
| ide_execute_command(drive, tf->command, handler, |
| WAIT_WORSTCASE, NULL); |
| return ide_started; |
| default: |
| if (task_dma_ok(task) == 0 || drive->using_dma == 0 || |
| hwif->dma_setup(drive)) |
| return ide_stopped; |
| hwif->dma_exec_cmd(drive, tf->command); |
| hwif->dma_start(drive); |
| return ide_started; |
| } |
| } |
| EXPORT_SYMBOL_GPL(do_rw_taskfile); |
| |
| /* |
| * set_multmode_intr() is invoked on completion of a WIN_SETMULT cmd. |
| */ |
| static ide_startstop_t set_multmode_intr(ide_drive_t *drive) |
| { |
| u8 stat = ide_read_status(drive); |
| |
| if (OK_STAT(stat, READY_STAT, BAD_STAT)) |
| drive->mult_count = drive->mult_req; |
| else { |
| drive->mult_req = drive->mult_count = 0; |
| drive->special.b.recalibrate = 1; |
| (void) ide_dump_status(drive, "set_multmode", stat); |
| } |
| return ide_stopped; |
| } |
| |
| /* |
| * set_geometry_intr() is invoked on completion of a WIN_SPECIFY cmd. |
| */ |
| static ide_startstop_t set_geometry_intr(ide_drive_t *drive) |
| { |
| int retries = 5; |
| u8 stat; |
| |
| while (((stat = ide_read_status(drive)) & BUSY_STAT) && retries--) |
| udelay(10); |
| |
| if (OK_STAT(stat, READY_STAT, BAD_STAT)) |
| return ide_stopped; |
| |
| if (stat & (ERR_STAT|DRQ_STAT)) |
| return ide_error(drive, "set_geometry_intr", stat); |
| |
| BUG_ON(HWGROUP(drive)->handler != NULL); |
| ide_set_handler(drive, &set_geometry_intr, WAIT_WORSTCASE, NULL); |
| return ide_started; |
| } |
| |
| /* |
| * recal_intr() is invoked on completion of a WIN_RESTORE (recalibrate) cmd. |
| */ |
| static ide_startstop_t recal_intr(ide_drive_t *drive) |
| { |
| u8 stat = ide_read_status(drive); |
| |
| if (!OK_STAT(stat, READY_STAT, BAD_STAT)) |
| return ide_error(drive, "recal_intr", stat); |
| return ide_stopped; |
| } |
| |
| /* |
| * Handler for commands without a data phase |
| */ |
| static ide_startstop_t task_no_data_intr(ide_drive_t *drive) |
| { |
| ide_task_t *args = HWGROUP(drive)->rq->special; |
| u8 stat; |
| |
| local_irq_enable_in_hardirq(); |
| stat = ide_read_status(drive); |
| |
| if (!OK_STAT(stat, READY_STAT, BAD_STAT)) |
| return ide_error(drive, "task_no_data_intr", stat); |
| /* calls ide_end_drive_cmd */ |
| |
| if (args) |
| ide_end_drive_cmd(drive, stat, ide_read_error(drive)); |
| |
| return ide_stopped; |
| } |
| |
| static u8 wait_drive_not_busy(ide_drive_t *drive) |
| { |
| int retries; |
| u8 stat; |
| |
| /* |
| * Last sector was transfered, wait until drive is ready. |
| * This can take up to 10 usec, but we will wait max 1 ms. |
| */ |
| for (retries = 0; retries < 100; retries++) { |
| stat = ide_read_status(drive); |
| |
| if (stat & BUSY_STAT) |
| udelay(10); |
| else |
| break; |
| } |
| |
| if (stat & BUSY_STAT) |
| printk(KERN_ERR "%s: drive still BUSY!\n", drive->name); |
| |
| return stat; |
| } |
| |
| static void ide_pio_sector(ide_drive_t *drive, unsigned int write) |
| { |
| ide_hwif_t *hwif = drive->hwif; |
| struct scatterlist *sg = hwif->sg_table; |
| struct scatterlist *cursg = hwif->cursg; |
| struct page *page; |
| #ifdef CONFIG_HIGHMEM |
| unsigned long flags; |
| #endif |
| unsigned int offset; |
| u8 *buf; |
| |
| cursg = hwif->cursg; |
| if (!cursg) { |
| cursg = sg; |
| hwif->cursg = sg; |
| } |
| |
| page = sg_page(cursg); |
| offset = cursg->offset + hwif->cursg_ofs * SECTOR_SIZE; |
| |
| /* get the current page and offset */ |
| page = nth_page(page, (offset >> PAGE_SHIFT)); |
| offset %= PAGE_SIZE; |
| |
| #ifdef CONFIG_HIGHMEM |
| local_irq_save(flags); |
| #endif |
| buf = kmap_atomic(page, KM_BIO_SRC_IRQ) + offset; |
| |
| hwif->nleft--; |
| hwif->cursg_ofs++; |
| |
| if ((hwif->cursg_ofs * SECTOR_SIZE) == cursg->length) { |
| hwif->cursg = sg_next(hwif->cursg); |
| hwif->cursg_ofs = 0; |
| } |
| |
| /* do the actual data transfer */ |
| if (write) |
| hwif->ata_output_data(drive, buf, SECTOR_WORDS); |
| else |
| hwif->ata_input_data(drive, buf, SECTOR_WORDS); |
| |
| kunmap_atomic(buf, KM_BIO_SRC_IRQ); |
| #ifdef CONFIG_HIGHMEM |
| local_irq_restore(flags); |
| #endif |
| } |
| |
| static void ide_pio_multi(ide_drive_t *drive, unsigned int write) |
| { |
| unsigned int nsect; |
| |
| nsect = min_t(unsigned int, drive->hwif->nleft, drive->mult_count); |
| while (nsect--) |
| ide_pio_sector(drive, write); |
| } |
| |
| static void ide_pio_datablock(ide_drive_t *drive, struct request *rq, |
| unsigned int write) |
| { |
| u8 saved_io_32bit = drive->io_32bit; |
| |
| if (rq->bio) /* fs request */ |
| rq->errors = 0; |
| |
| if (rq->cmd_type == REQ_TYPE_ATA_TASKFILE) { |
| ide_task_t *task = rq->special; |
| |
| if (task->tf_flags & IDE_TFLAG_IO_16BIT) |
| drive->io_32bit = 0; |
| } |
| |
| touch_softlockup_watchdog(); |
| |
| switch (drive->hwif->data_phase) { |
| case TASKFILE_MULTI_IN: |
| case TASKFILE_MULTI_OUT: |
| ide_pio_multi(drive, write); |
| break; |
| default: |
| ide_pio_sector(drive, write); |
| break; |
| } |
| |
| drive->io_32bit = saved_io_32bit; |
| } |
| |
| static ide_startstop_t task_error(ide_drive_t *drive, struct request *rq, |
| const char *s, u8 stat) |
| { |
| if (rq->bio) { |
| ide_hwif_t *hwif = drive->hwif; |
| int sectors = hwif->nsect - hwif->nleft; |
| |
| switch (hwif->data_phase) { |
| case TASKFILE_IN: |
| if (hwif->nleft) |
| break; |
| /* fall through */ |
| case TASKFILE_OUT: |
| sectors--; |
| break; |
| case TASKFILE_MULTI_IN: |
| if (hwif->nleft) |
| break; |
| /* fall through */ |
| case TASKFILE_MULTI_OUT: |
| sectors -= drive->mult_count; |
| default: |
| break; |
| } |
| |
| if (sectors > 0) { |
| ide_driver_t *drv; |
| |
| drv = *(ide_driver_t **)rq->rq_disk->private_data; |
| drv->end_request(drive, 1, sectors); |
| } |
| } |
| return ide_error(drive, s, stat); |
| } |
| |
| void task_end_request(ide_drive_t *drive, struct request *rq, u8 stat) |
| { |
| if (rq->cmd_type == REQ_TYPE_ATA_TASKFILE) { |
| u8 err = ide_read_error(drive); |
| |
| ide_end_drive_cmd(drive, stat, err); |
| return; |
| } |
| |
| if (rq->rq_disk) { |
| ide_driver_t *drv; |
| |
| drv = *(ide_driver_t **)rq->rq_disk->private_data;; |
| drv->end_request(drive, 1, rq->nr_sectors); |
| } else |
| ide_end_request(drive, 1, rq->nr_sectors); |
| } |
| |
| /* |
| * Handler for command with PIO data-in phase (Read/Read Multiple). |
| */ |
| static ide_startstop_t task_in_intr(ide_drive_t *drive) |
| { |
| ide_hwif_t *hwif = drive->hwif; |
| struct request *rq = HWGROUP(drive)->rq; |
| u8 stat = ide_read_status(drive); |
| |
| /* new way for dealing with premature shared PCI interrupts */ |
| if (!OK_STAT(stat, DRQ_STAT, BAD_R_STAT)) { |
| if (stat & (ERR_STAT | DRQ_STAT)) |
| return task_error(drive, rq, __FUNCTION__, stat); |
| /* No data yet, so wait for another IRQ. */ |
| ide_set_handler(drive, &task_in_intr, WAIT_WORSTCASE, NULL); |
| return ide_started; |
| } |
| |
| ide_pio_datablock(drive, rq, 0); |
| |
| /* If it was the last datablock check status and finish transfer. */ |
| if (!hwif->nleft) { |
| stat = wait_drive_not_busy(drive); |
| if (!OK_STAT(stat, 0, BAD_STAT)) |
| return task_error(drive, rq, __FUNCTION__, stat); |
| task_end_request(drive, rq, stat); |
| return ide_stopped; |
| } |
| |
| /* Still data left to transfer. */ |
| ide_set_handler(drive, &task_in_intr, WAIT_WORSTCASE, NULL); |
| |
| return ide_started; |
| } |
| |
| /* |
| * Handler for command with PIO data-out phase (Write/Write Multiple). |
| */ |
| static ide_startstop_t task_out_intr (ide_drive_t *drive) |
| { |
| ide_hwif_t *hwif = drive->hwif; |
| struct request *rq = HWGROUP(drive)->rq; |
| u8 stat = ide_read_status(drive); |
| |
| if (!OK_STAT(stat, DRIVE_READY, drive->bad_wstat)) |
| return task_error(drive, rq, __FUNCTION__, stat); |
| |
| /* Deal with unexpected ATA data phase. */ |
| if (((stat & DRQ_STAT) == 0) ^ !hwif->nleft) |
| return task_error(drive, rq, __FUNCTION__, stat); |
| |
| if (!hwif->nleft) { |
| task_end_request(drive, rq, stat); |
| return ide_stopped; |
| } |
| |
| /* Still data left to transfer. */ |
| ide_pio_datablock(drive, rq, 1); |
| ide_set_handler(drive, &task_out_intr, WAIT_WORSTCASE, NULL); |
| |
| return ide_started; |
| } |
| |
| static ide_startstop_t pre_task_out_intr(ide_drive_t *drive, struct request *rq) |
| { |
| ide_startstop_t startstop; |
| |
| if (ide_wait_stat(&startstop, drive, DRQ_STAT, |
| drive->bad_wstat, WAIT_DRQ)) { |
| printk(KERN_ERR "%s: no DRQ after issuing %sWRITE%s\n", |
| drive->name, |
| drive->hwif->data_phase ? "MULT" : "", |
| drive->addressing ? "_EXT" : ""); |
| return startstop; |
| } |
| |
| if (!drive->unmask) |
| local_irq_disable(); |
| |
| ide_set_handler(drive, &task_out_intr, WAIT_WORSTCASE, NULL); |
| ide_pio_datablock(drive, rq, 1); |
| |
| return ide_started; |
| } |
| |
| int ide_raw_taskfile(ide_drive_t *drive, ide_task_t *task, u8 *buf, u16 nsect) |
| { |
| struct request rq; |
| |
| memset(&rq, 0, sizeof(rq)); |
| rq.ref_count = 1; |
| rq.cmd_type = REQ_TYPE_ATA_TASKFILE; |
| rq.buffer = buf; |
| |
| /* |
| * (ks) We transfer currently only whole sectors. |
| * This is suffient for now. But, it would be great, |
| * if we would find a solution to transfer any size. |
| * To support special commands like READ LONG. |
| */ |
| rq.hard_nr_sectors = rq.nr_sectors = nsect; |
| rq.hard_cur_sectors = rq.current_nr_sectors = nsect; |
| |
| if (task->tf_flags & IDE_TFLAG_WRITE) |
| rq.cmd_flags |= REQ_RW; |
| |
| rq.special = task; |
| task->rq = &rq; |
| |
| return ide_do_drive_cmd(drive, &rq, ide_wait); |
| } |
| |
| EXPORT_SYMBOL(ide_raw_taskfile); |
| |
| int ide_no_data_taskfile(ide_drive_t *drive, ide_task_t *task) |
| { |
| task->data_phase = TASKFILE_NO_DATA; |
| |
| return ide_raw_taskfile(drive, task, NULL, 0); |
| } |
| EXPORT_SYMBOL_GPL(ide_no_data_taskfile); |
| |
| #ifdef CONFIG_IDE_TASK_IOCTL |
| int ide_taskfile_ioctl (ide_drive_t *drive, unsigned int cmd, unsigned long arg) |
| { |
| ide_task_request_t *req_task; |
| ide_task_t args; |
| u8 *outbuf = NULL; |
| u8 *inbuf = NULL; |
| u8 *data_buf = NULL; |
| int err = 0; |
| int tasksize = sizeof(struct ide_task_request_s); |
| unsigned int taskin = 0; |
| unsigned int taskout = 0; |
| u16 nsect = 0; |
| char __user *buf = (char __user *)arg; |
| |
| // printk("IDE Taskfile ...\n"); |
| |
| req_task = kzalloc(tasksize, GFP_KERNEL); |
| if (req_task == NULL) return -ENOMEM; |
| if (copy_from_user(req_task, buf, tasksize)) { |
| kfree(req_task); |
| return -EFAULT; |
| } |
| |
| taskout = req_task->out_size; |
| taskin = req_task->in_size; |
| |
| if (taskin > 65536 || taskout > 65536) { |
| err = -EINVAL; |
| goto abort; |
| } |
| |
| if (taskout) { |
| int outtotal = tasksize; |
| outbuf = kzalloc(taskout, GFP_KERNEL); |
| if (outbuf == NULL) { |
| err = -ENOMEM; |
| goto abort; |
| } |
| if (copy_from_user(outbuf, buf + outtotal, taskout)) { |
| err = -EFAULT; |
| goto abort; |
| } |
| } |
| |
| if (taskin) { |
| int intotal = tasksize + taskout; |
| inbuf = kzalloc(taskin, GFP_KERNEL); |
| if (inbuf == NULL) { |
| err = -ENOMEM; |
| goto abort; |
| } |
| if (copy_from_user(inbuf, buf + intotal, taskin)) { |
| err = -EFAULT; |
| goto abort; |
| } |
| } |
| |
| memset(&args, 0, sizeof(ide_task_t)); |
| |
| memcpy(&args.tf_array[0], req_task->hob_ports, HDIO_DRIVE_HOB_HDR_SIZE - 2); |
| memcpy(&args.tf_array[6], req_task->io_ports, HDIO_DRIVE_TASK_HDR_SIZE); |
| |
| args.data_phase = req_task->data_phase; |
| |
| args.tf_flags = IDE_TFLAG_IO_16BIT | IDE_TFLAG_DEVICE | |
| IDE_TFLAG_IN_TF; |
| if (drive->addressing == 1) |
| args.tf_flags |= (IDE_TFLAG_LBA48 | IDE_TFLAG_IN_HOB); |
| |
| if (req_task->out_flags.all) { |
| args.tf_flags |= IDE_TFLAG_FLAGGED; |
| |
| if (req_task->out_flags.b.data) |
| args.tf_flags |= IDE_TFLAG_OUT_DATA; |
| |
| if (req_task->out_flags.b.nsector_hob) |
| args.tf_flags |= IDE_TFLAG_OUT_HOB_NSECT; |
| if (req_task->out_flags.b.sector_hob) |
| args.tf_flags |= IDE_TFLAG_OUT_HOB_LBAL; |
| if (req_task->out_flags.b.lcyl_hob) |
| args.tf_flags |= IDE_TFLAG_OUT_HOB_LBAM; |
| if (req_task->out_flags.b.hcyl_hob) |
| args.tf_flags |= IDE_TFLAG_OUT_HOB_LBAH; |
| |
| if (req_task->out_flags.b.error_feature) |
| args.tf_flags |= IDE_TFLAG_OUT_FEATURE; |
| if (req_task->out_flags.b.nsector) |
| args.tf_flags |= IDE_TFLAG_OUT_NSECT; |
| if (req_task->out_flags.b.sector) |
| args.tf_flags |= IDE_TFLAG_OUT_LBAL; |
| if (req_task->out_flags.b.lcyl) |
| args.tf_flags |= IDE_TFLAG_OUT_LBAM; |
| if (req_task->out_flags.b.hcyl) |
| args.tf_flags |= IDE_TFLAG_OUT_LBAH; |
| } else { |
| args.tf_flags |= IDE_TFLAG_OUT_TF; |
| if (args.tf_flags & IDE_TFLAG_LBA48) |
| args.tf_flags |= IDE_TFLAG_OUT_HOB; |
| } |
| |
| if (req_task->in_flags.b.data) |
| args.tf_flags |= IDE_TFLAG_IN_DATA; |
| |
| switch(req_task->data_phase) { |
| case TASKFILE_MULTI_OUT: |
| if (!drive->mult_count) { |
| /* (hs): give up if multcount is not set */ |
| printk(KERN_ERR "%s: %s Multimode Write " \ |
| "multcount is not set\n", |
| drive->name, __FUNCTION__); |
| err = -EPERM; |
| goto abort; |
| } |
| /* fall through */ |
| case TASKFILE_OUT: |
| /* fall through */ |
| case TASKFILE_OUT_DMAQ: |
| case TASKFILE_OUT_DMA: |
| nsect = taskout / SECTOR_SIZE; |
| data_buf = outbuf; |
| break; |
| case TASKFILE_MULTI_IN: |
| if (!drive->mult_count) { |
| /* (hs): give up if multcount is not set */ |
| printk(KERN_ERR "%s: %s Multimode Read failure " \ |
| "multcount is not set\n", |
| drive->name, __FUNCTION__); |
| err = -EPERM; |
| goto abort; |
| } |
| /* fall through */ |
| case TASKFILE_IN: |
| /* fall through */ |
| case TASKFILE_IN_DMAQ: |
| case TASKFILE_IN_DMA: |
| nsect = taskin / SECTOR_SIZE; |
| data_buf = inbuf; |
| break; |
| case TASKFILE_NO_DATA: |
| break; |
| default: |
| err = -EFAULT; |
| goto abort; |
| } |
| |
| if (req_task->req_cmd == IDE_DRIVE_TASK_NO_DATA) |
| nsect = 0; |
| else if (!nsect) { |
| nsect = (args.tf.hob_nsect << 8) | args.tf.nsect; |
| |
| if (!nsect) { |
| printk(KERN_ERR "%s: in/out command without data\n", |
| drive->name); |
| err = -EFAULT; |
| goto abort; |
| } |
| } |
| |
| if (req_task->req_cmd == IDE_DRIVE_TASK_RAW_WRITE) |
| args.tf_flags |= IDE_TFLAG_WRITE; |
| |
| err = ide_raw_taskfile(drive, &args, data_buf, nsect); |
| |
| memcpy(req_task->hob_ports, &args.tf_array[0], HDIO_DRIVE_HOB_HDR_SIZE - 2); |
| memcpy(req_task->io_ports, &args.tf_array[6], HDIO_DRIVE_TASK_HDR_SIZE); |
| |
| if ((args.tf_flags & IDE_TFLAG_FLAGGED_SET_IN_FLAGS) && |
| req_task->in_flags.all == 0) { |
| req_task->in_flags.all = IDE_TASKFILE_STD_IN_FLAGS; |
| if (drive->addressing == 1) |
| req_task->in_flags.all |= (IDE_HOB_STD_IN_FLAGS << 8); |
| } |
| |
| if (copy_to_user(buf, req_task, tasksize)) { |
| err = -EFAULT; |
| goto abort; |
| } |
| if (taskout) { |
| int outtotal = tasksize; |
| if (copy_to_user(buf + outtotal, outbuf, taskout)) { |
| err = -EFAULT; |
| goto abort; |
| } |
| } |
| if (taskin) { |
| int intotal = tasksize + taskout; |
| if (copy_to_user(buf + intotal, inbuf, taskin)) { |
| err = -EFAULT; |
| goto abort; |
| } |
| } |
| abort: |
| kfree(req_task); |
| kfree(outbuf); |
| kfree(inbuf); |
| |
| // printk("IDE Taskfile ioctl ended. rc = %i\n", err); |
| |
| return err; |
| } |
| #endif |
| |
| int ide_cmd_ioctl (ide_drive_t *drive, unsigned int cmd, unsigned long arg) |
| { |
| u8 *buf = NULL; |
| int bufsize = 0, err = 0; |
| u8 args[4], xfer_rate = 0; |
| ide_task_t tfargs; |
| struct ide_taskfile *tf = &tfargs.tf; |
| struct hd_driveid *id = drive->id; |
| |
| if (NULL == (void *) arg) { |
| struct request rq; |
| |
| ide_init_drive_cmd(&rq); |
| rq.cmd_type = REQ_TYPE_ATA_TASKFILE; |
| |
| return ide_do_drive_cmd(drive, &rq, ide_wait); |
| } |
| |
| if (copy_from_user(args, (void __user *)arg, 4)) |
| return -EFAULT; |
| |
| memset(&tfargs, 0, sizeof(ide_task_t)); |
| tf->feature = args[2]; |
| if (args[0] == WIN_SMART) { |
| tf->nsect = args[3]; |
| tf->lbal = args[1]; |
| tf->lbam = 0x4f; |
| tf->lbah = 0xc2; |
| tfargs.tf_flags = IDE_TFLAG_OUT_TF | IDE_TFLAG_IN_NSECT; |
| } else { |
| tf->nsect = args[1]; |
| tfargs.tf_flags = IDE_TFLAG_OUT_FEATURE | |
| IDE_TFLAG_OUT_NSECT | IDE_TFLAG_IN_NSECT; |
| } |
| tf->command = args[0]; |
| tfargs.data_phase = args[3] ? TASKFILE_IN : TASKFILE_NO_DATA; |
| |
| if (args[3]) { |
| tfargs.tf_flags |= IDE_TFLAG_IO_16BIT; |
| bufsize = SECTOR_WORDS * 4 * args[3]; |
| buf = kzalloc(bufsize, GFP_KERNEL); |
| if (buf == NULL) |
| return -ENOMEM; |
| } |
| |
| if (tf->command == WIN_SETFEATURES && |
| tf->feature == SETFEATURES_XFER && |
| tf->nsect >= XFER_SW_DMA_0 && |
| (id->dma_ultra || id->dma_mword || id->dma_1word)) { |
| xfer_rate = args[1]; |
| if (tf->nsect > XFER_UDMA_2 && !eighty_ninty_three(drive)) { |
| printk(KERN_WARNING "%s: UDMA speeds >UDMA33 cannot " |
| "be set\n", drive->name); |
| goto abort; |
| } |
| } |
| |
| err = ide_raw_taskfile(drive, &tfargs, buf, args[3]); |
| |
| args[0] = tf->status; |
| args[1] = tf->error; |
| args[2] = tf->nsect; |
| |
| if (!err && xfer_rate) { |
| /* active-retuning-calls future */ |
| ide_set_xfer_rate(drive, xfer_rate); |
| ide_driveid_update(drive); |
| } |
| abort: |
| if (copy_to_user((void __user *)arg, &args, 4)) |
| err = -EFAULT; |
| if (buf) { |
| if (copy_to_user((void __user *)(arg + 4), buf, bufsize)) |
| err = -EFAULT; |
| kfree(buf); |
| } |
| return err; |
| } |
| |
| int ide_task_ioctl (ide_drive_t *drive, unsigned int cmd, unsigned long arg) |
| { |
| void __user *p = (void __user *)arg; |
| int err = 0; |
| u8 args[7]; |
| ide_task_t task; |
| |
| if (copy_from_user(args, p, 7)) |
| return -EFAULT; |
| |
| memset(&task, 0, sizeof(task)); |
| memcpy(&task.tf_array[7], &args[1], 6); |
| task.tf.command = args[0]; |
| task.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE; |
| |
| err = ide_no_data_taskfile(drive, &task); |
| |
| args[0] = task.tf.command; |
| memcpy(&args[1], &task.tf_array[7], 6); |
| |
| if (copy_to_user(p, args, 7)) |
| err = -EFAULT; |
| |
| return err; |
| } |