| menuconfig RT2X00 |
| tristate "Ralink driver support" |
| depends on MAC80211 |
| ---help--- |
| This will enable the support for the Ralink drivers, |
| developed in the rt2x00 project <http://rt2x00.serialmonkey.com>. |
| |
| These drivers make use of the mac80211 stack. |
| |
| When building one of the individual drivers, the rt2x00 library |
| will also be created. That library (when the driver is built as |
| a module) will be called rt2x00lib. |
| |
| Additionally PCI and USB libraries will also be build depending |
| on the types of drivers being selected, these libraries will be |
| called rt2x00pci and rt2x00usb. |
| |
| if RT2X00 |
| |
| config RT2400PCI |
| tristate "Ralink rt2400 (PCI/PCMCIA) support" |
| depends on PCI |
| select RT2X00_LIB_PCI |
| select EEPROM_93CX6 |
| ---help--- |
| This adds support for rt2400 wireless chipset family. |
| Supported chips: RT2460. |
| |
| When compiled as a module, this driver will be called rt2400pci. |
| |
| config RT2500PCI |
| tristate "Ralink rt2500 (PCI/PCMCIA) support" |
| depends on PCI |
| select RT2X00_LIB_PCI |
| select EEPROM_93CX6 |
| ---help--- |
| This adds support for rt2500 wireless chipset family. |
| Supported chips: RT2560. |
| |
| When compiled as a module, this driver will be called rt2500pci. |
| |
| config RT61PCI |
| tristate "Ralink rt2501/rt61 (PCI/PCMCIA) support" |
| depends on PCI |
| select RT2X00_LIB_PCI |
| select RT2X00_LIB_FIRMWARE |
| select RT2X00_LIB_CRYPTO |
| select CRC_ITU_T |
| select EEPROM_93CX6 |
| ---help--- |
| This adds support for rt2501 wireless chipset family. |
| Supported chips: RT2561, RT2561S & RT2661. |
| |
| When compiled as a module, this driver will be called rt61pci. |
| |
| config RT2800PCI_PCI |
| tristate |
| depends on PCI |
| default y |
| |
| config RT2800PCI_SOC |
| tristate |
| depends on RALINK_RT288X || RALINK_RT305X |
| default y |
| |
| config RT2800PCI |
| tristate "Ralink rt2800 (PCI/PCMCIA) support (VERY EXPERIMENTAL)" |
| depends on (RT2800PCI_PCI || RT2800PCI_SOC) && EXPERIMENTAL |
| select RT2800_LIB |
| select RT2X00_LIB_PCI if RT2800PCI_PCI |
| select RT2X00_LIB_SOC if RT2800PCI_SOC |
| select RT2X00_LIB_HT |
| select RT2X00_LIB_FIRMWARE |
| select RT2X00_LIB_CRYPTO |
| select CRC_CCITT |
| select EEPROM_93CX6 |
| ---help--- |
| This adds support for rt2800 wireless chipset family. |
| Supported chips: RT2760, RT2790, RT2860, RT2880, RT2890 & RT3052 |
| |
| This driver is non-functional at the moment and is intended for |
| developers. |
| |
| When compiled as a module, this driver will be called "rt2800pci.ko". |
| |
| config RT2500USB |
| tristate "Ralink rt2500 (USB) support" |
| depends on USB |
| select RT2X00_LIB_USB |
| select RT2X00_LIB_CRYPTO |
| ---help--- |
| This adds support for rt2500 wireless chipset family. |
| Supported chips: RT2571 & RT2572. |
| |
| When compiled as a module, this driver will be called rt2500usb. |
| |
| config RT73USB |
| tristate "Ralink rt2501/rt73 (USB) support" |
| depends on USB |
| select RT2X00_LIB_USB |
| select RT2X00_LIB_FIRMWARE |
| select RT2X00_LIB_CRYPTO |
| select CRC_ITU_T |
| ---help--- |
| This adds support for rt2501 wireless chipset family. |
| Supported chips: RT2571W, RT2573 & RT2671. |
| |
| When compiled as a module, this driver will be called rt73usb. |
| |
| config RT2800USB |
| tristate "Ralink rt2800 (USB) support (EXPERIMENTAL)" |
| depends on USB && EXPERIMENTAL |
| select RT2800_LIB |
| select RT2X00_LIB_USB |
| select RT2X00_LIB_HT |
| select RT2X00_LIB_FIRMWARE |
| select RT2X00_LIB_CRYPTO |
| select CRC_CCITT |
| ---help--- |
| This adds experimental support for rt2800 wireless chipset family. |
| Supported chips: RT2770, RT2870 & RT3070. |
| |
| Known issues: |
| - support for RT2870 chips doesn't work with 802.11n APs yet |
| - support for RT3070 chips is non-functional at the moment |
| |
| When compiled as a module, this driver will be called "rt2800usb.ko". |
| |
| config RT2800_LIB |
| tristate |
| |
| config RT2X00_LIB_PCI |
| tristate |
| select RT2X00_LIB |
| |
| config RT2X00_LIB_SOC |
| tristate |
| select RT2X00_LIB |
| |
| config RT2X00_LIB_USB |
| tristate |
| select RT2X00_LIB |
| |
| config RT2X00_LIB |
| tristate |
| |
| config RT2X00_LIB_HT |
| boolean |
| |
| config RT2X00_LIB_FIRMWARE |
| boolean |
| select FW_LOADER |
| |
| config RT2X00_LIB_CRYPTO |
| boolean |
| |
| config RT2X00_LIB_LEDS |
| boolean |
| default y if (RT2X00_LIB=y && LEDS_CLASS=y) || (RT2X00_LIB=m && LEDS_CLASS!=n) |
| |
| comment "rt2x00 leds support disabled due to modularized LEDS_CLASS and built-in rt2x00" |
| depends on RT2X00_LIB=y && LEDS_CLASS=m |
| |
| config RT2X00_LIB_DEBUGFS |
| bool "Ralink debugfs support" |
| depends on RT2X00_LIB && MAC80211_DEBUGFS |
| ---help--- |
| Enable creation of debugfs files for the rt2x00 drivers. |
| These debugfs files support both reading and writing of the |
| most important register types of the rt2x00 hardware. |
| |
| config RT2X00_DEBUG |
| bool "Ralink debug output" |
| depends on RT2X00_LIB |
| ---help--- |
| Enable debugging output for all rt2x00 modules |
| |
| endif |