net: fix phy refcounting in a bunch of drivers
of_phy_find_device() increments the phy struct device refcount, which
we need to properly balance. Add code to network drivers using this
function to ensure that the struct device refcount is correctly
balanced.
For xgene, looking back in the history, we should be able to use
of_phy_connect() with a zero flags argument for the DT case as this is
how the driver used to operate prior to de7b5b3d790a ("net: eth: xgene:
change APM X-Gene SoC platform ethernet to support ACPI").
This leaves the Cavium Thunder BGX unfixed; fixing this driver is a
complicated task, one which the maintainers need to be involved with.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/ethernet/apm/xgene/xgene_enet_hw.c b/drivers/net/ethernet/apm/xgene/xgene_enet_hw.c
index cfa3704..c4bb802 100644
--- a/drivers/net/ethernet/apm/xgene/xgene_enet_hw.c
+++ b/drivers/net/ethernet/apm/xgene/xgene_enet_hw.c
@@ -689,16 +689,24 @@
netdev_dbg(ndev, "No phy-handle found in DT\n");
return -ENODEV;
}
- pdata->phy_dev = of_phy_find_device(phy_np);
- }
- phy_dev = pdata->phy_dev;
+ phy_dev = of_phy_connect(ndev, phy_np, &xgene_enet_adjust_link,
+ 0, pdata->phy_mode);
+ if (!phy_dev) {
+ netdev_err(ndev, "Could not connect to PHY\n");
+ return -ENODEV;
+ }
- if (!phy_dev ||
- phy_connect_direct(ndev, phy_dev, &xgene_enet_adjust_link,
- pdata->phy_mode)) {
- netdev_err(ndev, "Could not connect to PHY\n");
- return -ENODEV;
+ pdata->phy_dev = phy_dev;
+ } else {
+ phy_dev = pdata->phy_dev;
+
+ if (!phy_dev ||
+ phy_connect_direct(ndev, phy_dev, &xgene_enet_adjust_link,
+ pdata->phy_mode)) {
+ netdev_err(ndev, "Could not connect to PHY\n");
+ return -ENODEV;
+ }
}
pdata->phy_speed = SPEED_UNKNOWN;
diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c
index 803ed4c9..a5cf433 100644
--- a/drivers/net/ethernet/freescale/gianfar.c
+++ b/drivers/net/ethernet/freescale/gianfar.c
@@ -1702,6 +1702,7 @@
tbiphy = of_phy_find_device(priv->tbi_node);
if (!tbiphy) {
dev_err(&dev->dev, "error: Could not get TBI device\n");
+ put_device(&tbiphy->dev);
return;
}
@@ -1723,6 +1724,8 @@
phy_write(tbiphy, MII_BMCR,
BMCR_ANENABLE | BMCR_ANRESTART | BMCR_FULLDPLX |
BMCR_SPEED1000);
+
+ put_device(&tbiphy->dev);
}
static int __gfar_is_rx_idle(struct gfar_private *priv)
diff --git a/drivers/net/ethernet/freescale/ucc_geth.c b/drivers/net/ethernet/freescale/ucc_geth.c
index 4dd40e0..650f788 100644
--- a/drivers/net/ethernet/freescale/ucc_geth.c
+++ b/drivers/net/ethernet/freescale/ucc_geth.c
@@ -1384,6 +1384,8 @@
value = phy_read(tbiphy, ENET_TBI_MII_CR);
value &= ~0x1000; /* Turn off autonegotiation */
phy_write(tbiphy, ENET_TBI_MII_CR, value);
+
+ put_device(&tbiphy->dev);
}
init_check_frame_length_mode(ug_info->lengthCheckRx, &ug_regs->maccfg2);
@@ -1702,8 +1704,10 @@
* everything for us? Resetting it takes the link down and requires
* several seconds for it to come back.
*/
- if (phy_read(tbiphy, ENET_TBI_MII_SR) & TBISR_LSTATUS)
+ if (phy_read(tbiphy, ENET_TBI_MII_SR) & TBISR_LSTATUS) {
+ put_device(&tbiphy->dev);
return;
+ }
/* Single clk mode, mii mode off(for serdes communication) */
phy_write(tbiphy, ENET_TBI_MII_ANA, TBIANA_SETTINGS);
@@ -1711,6 +1715,8 @@
phy_write(tbiphy, ENET_TBI_MII_TBICON, TBICON_CLK_SELECT);
phy_write(tbiphy, ENET_TBI_MII_CR, TBICR_SETTINGS);
+
+ put_device(&tbiphy->dev);
}
/* Configure the PHY for dev.
diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index 09ec32e..514df76 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -3175,6 +3175,8 @@
struct phy_device *phy = of_phy_find_device(dn);
mvneta_fixed_link_update(pp, phy);
+
+ put_device(&phy->dev);
}
return 0;
diff --git a/drivers/net/ethernet/xilinx/xilinx_emaclite.c b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
index 6008eee..cf468c8 100644
--- a/drivers/net/ethernet/xilinx/xilinx_emaclite.c
+++ b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
@@ -828,6 +828,8 @@
if (!phydev)
dev_info(dev,
"MDIO of the phy is not registered yet\n");
+ else
+ put_device(&phydev->dev);
return 0;
}