| /* |
| * Copyright (c) 2005-2010 Brocade Communications Systems, Inc. |
| * All rights reserved |
| * www.brocade.com |
| * |
| * Linux driver for Brocade Fibre Channel Host Bus Adapter. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License (GPL) Version 2 as |
| * published by the Free Software Foundation |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| */ |
| |
| #ifndef __BFA_DEFS_H__ |
| #define __BFA_DEFS_H__ |
| |
| #include "bfa_fc.h" |
| #include "bfad_drv.h" |
| |
| #define BFA_MFG_SERIALNUM_SIZE 11 |
| #define STRSZ(_n) (((_n) + 4) & ~3) |
| |
| /* |
| * Manufacturing card type |
| */ |
| enum { |
| BFA_MFG_TYPE_CB_MAX = 825, /* Crossbow card type max */ |
| BFA_MFG_TYPE_FC8P2 = 825, /* 8G 2port FC card */ |
| BFA_MFG_TYPE_FC8P1 = 815, /* 8G 1port FC card */ |
| BFA_MFG_TYPE_FC4P2 = 425, /* 4G 2port FC card */ |
| BFA_MFG_TYPE_FC4P1 = 415, /* 4G 1port FC card */ |
| BFA_MFG_TYPE_CNA10P2 = 1020, /* 10G 2port CNA card */ |
| BFA_MFG_TYPE_CNA10P1 = 1010, /* 10G 1port CNA card */ |
| BFA_MFG_TYPE_JAYHAWK = 804, /* Jayhawk mezz card */ |
| BFA_MFG_TYPE_WANCHESE = 1007, /* Wanchese mezz card */ |
| BFA_MFG_TYPE_ASTRA = 807, /* Astra mezz card */ |
| BFA_MFG_TYPE_LIGHTNING_P0 = 902, /* Lightning mezz card - old */ |
| BFA_MFG_TYPE_LIGHTNING = 1741, /* Lightning mezz card */ |
| BFA_MFG_TYPE_PROWLER_F = 1560, /* Prowler FC only cards */ |
| BFA_MFG_TYPE_PROWLER_N = 1410, /* Prowler NIC only cards */ |
| BFA_MFG_TYPE_PROWLER_C = 1710, /* Prowler CNA only cards */ |
| BFA_MFG_TYPE_PROWLER_D = 1860, /* Prowler Dual cards */ |
| BFA_MFG_TYPE_CHINOOK = 1867, /* Chinook cards */ |
| BFA_MFG_TYPE_INVALID = 0, /* Invalid card type */ |
| }; |
| |
| #pragma pack(1) |
| |
| /* |
| * Check if Mezz card |
| */ |
| #define bfa_mfg_is_mezz(type) (( \ |
| (type) == BFA_MFG_TYPE_JAYHAWK || \ |
| (type) == BFA_MFG_TYPE_WANCHESE || \ |
| (type) == BFA_MFG_TYPE_ASTRA || \ |
| (type) == BFA_MFG_TYPE_LIGHTNING_P0 || \ |
| (type) == BFA_MFG_TYPE_LIGHTNING || \ |
| (type) == BFA_MFG_TYPE_CHINOOK)) |
| |
| /* |
| * Check if the card having old wwn/mac handling |
| */ |
| #define bfa_mfg_is_old_wwn_mac_model(type) (( \ |
| (type) == BFA_MFG_TYPE_FC8P2 || \ |
| (type) == BFA_MFG_TYPE_FC8P1 || \ |
| (type) == BFA_MFG_TYPE_FC4P2 || \ |
| (type) == BFA_MFG_TYPE_FC4P1 || \ |
| (type) == BFA_MFG_TYPE_CNA10P2 || \ |
| (type) == BFA_MFG_TYPE_CNA10P1 || \ |
| (type) == BFA_MFG_TYPE_JAYHAWK || \ |
| (type) == BFA_MFG_TYPE_WANCHESE)) |
| |
| #define bfa_mfg_increment_wwn_mac(m, i) \ |
| do { \ |
| u32 t = ((u32)(m)[0] << 16) | ((u32)(m)[1] << 8) | \ |
| (u32)(m)[2]; \ |
| t += (i); \ |
| (m)[0] = (t >> 16) & 0xFF; \ |
| (m)[1] = (t >> 8) & 0xFF; \ |
| (m)[2] = t & 0xFF; \ |
| } while (0) |
| |
| /* |
| * VPD data length |
| */ |
| #define BFA_MFG_VPD_LEN 512 |
| |
| /* |
| * VPD vendor tag |
| */ |
| enum { |
| BFA_MFG_VPD_UNKNOWN = 0, /* vendor unknown */ |
| BFA_MFG_VPD_IBM = 1, /* vendor IBM */ |
| BFA_MFG_VPD_HP = 2, /* vendor HP */ |
| BFA_MFG_VPD_DELL = 3, /* vendor DELL */ |
| BFA_MFG_VPD_PCI_IBM = 0x08, /* PCI VPD IBM */ |
| BFA_MFG_VPD_PCI_HP = 0x10, /* PCI VPD HP */ |
| BFA_MFG_VPD_PCI_DELL = 0x20, /* PCI VPD DELL */ |
| BFA_MFG_VPD_PCI_BRCD = 0xf8, /* PCI VPD Brocade */ |
| }; |
| |
| /* |
| * All numerical fields are in big-endian format. |
| */ |
| struct bfa_mfg_vpd_s { |
| u8 version; /* vpd data version */ |
| u8 vpd_sig[3]; /* characters 'V', 'P', 'D' */ |
| u8 chksum; /* u8 checksum */ |
| u8 vendor; /* vendor */ |
| u8 len; /* vpd data length excluding header */ |
| u8 rsv; |
| u8 data[BFA_MFG_VPD_LEN]; /* vpd data */ |
| }; |
| |
| #pragma pack() |
| |
| /* |
| * Status return values |
| */ |
| enum bfa_status { |
| BFA_STATUS_OK = 0, /* Success */ |
| BFA_STATUS_FAILED = 1, /* Operation failed */ |
| BFA_STATUS_EINVAL = 2, /* Invalid params Check input |
| * parameters */ |
| BFA_STATUS_ENOMEM = 3, /* Out of resources */ |
| BFA_STATUS_ETIMER = 5, /* Timer expired - Retry, if persists, |
| * contact support */ |
| BFA_STATUS_EPROTOCOL = 6, /* Protocol error */ |
| BFA_STATUS_SFP_UNSUPP = 10, /* Unsupported SFP - Replace SFP */ |
| BFA_STATUS_UNKNOWN_VFID = 11, /* VF_ID not found */ |
| BFA_STATUS_DATACORRUPTED = 12, /* Diag returned data corrupted */ |
| BFA_STATUS_DEVBUSY = 13, /* Device busy - Retry operation */ |
| BFA_STATUS_HDMA_FAILED = 16, /* Host dma failed contact support */ |
| BFA_STATUS_FLASH_BAD_LEN = 17, /* Flash bad length */ |
| BFA_STATUS_UNKNOWN_LWWN = 18, /* LPORT PWWN not found */ |
| BFA_STATUS_UNKNOWN_RWWN = 19, /* RPORT PWWN not found */ |
| BFA_STATUS_VPORT_EXISTS = 21, /* VPORT already exists */ |
| BFA_STATUS_VPORT_MAX = 22, /* Reached max VPORT supported limit */ |
| BFA_STATUS_UNSUPP_SPEED = 23, /* Invalid Speed Check speed setting */ |
| BFA_STATUS_INVLD_DFSZ = 24, /* Invalid Max data field size */ |
| BFA_STATUS_CMD_NOTSUPP = 26, /* Command/API not supported */ |
| BFA_STATUS_FABRIC_RJT = 29, /* Reject from attached fabric */ |
| BFA_STATUS_UNKNOWN_VWWN = 30, /* VPORT PWWN not found */ |
| BFA_STATUS_PORT_OFFLINE = 34, /* Port is not online */ |
| BFA_STATUS_VPORT_WWN_BP = 46, /* WWN is same as base port's WWN */ |
| BFA_STATUS_PORT_NOT_DISABLED = 47, /* Port not disabled disable port */ |
| BFA_STATUS_NO_FCPIM_NEXUS = 52, /* No FCP Nexus exists with the rport */ |
| BFA_STATUS_IOC_FAILURE = 56, /* IOC failure - Retry, if persists |
| * contact support */ |
| BFA_STATUS_INVALID_WWN = 57, /* Invalid WWN */ |
| BFA_STATUS_ADAPTER_ENABLED = 60, /* Adapter is not disabled */ |
| BFA_STATUS_IOC_NON_OP = 61, /* IOC is not operational */ |
| BFA_STATUS_VERSION_FAIL = 70, /* Application/Driver version mismatch */ |
| BFA_STATUS_DIAG_BUSY = 71, /* diag busy */ |
| BFA_STATUS_BEACON_ON = 72, /* Port Beacon already on */ |
| BFA_STATUS_ENOFSAVE = 78, /* No saved firmware trace */ |
| BFA_STATUS_IOC_DISABLED = 82, /* IOC is already disabled */ |
| BFA_STATUS_ERROR_TRL_ENABLED = 87, /* TRL is enabled */ |
| BFA_STATUS_ERROR_QOS_ENABLED = 88, /* QoS is enabled */ |
| BFA_STATUS_NO_SFP_DEV = 89, /* No SFP device check or replace SFP */ |
| BFA_STATUS_MEMTEST_FAILED = 90, /* Memory test failed contact support */ |
| BFA_STATUS_LEDTEST_OP = 109, /* LED test is operating */ |
| BFA_STATUS_INVALID_MAC = 134, /* Invalid MAC address */ |
| BFA_STATUS_CMD_NOTSUPP_CNA = 146, /* Command not supported for CNA */ |
| BFA_STATUS_PBC = 154, /* Operation not allowed for pre-boot |
| * configuration */ |
| BFA_STATUS_BAD_FWCFG = 156, /* Bad firmware configuration */ |
| BFA_STATUS_INVALID_VENDOR = 158, /* Invalid switch vendor */ |
| BFA_STATUS_SFP_NOT_READY = 159, /* SFP info is not ready. Retry */ |
| BFA_STATUS_TRUNK_ENABLED = 164, /* Trunk is already enabled on |
| * this adapter */ |
| BFA_STATUS_TRUNK_DISABLED = 165, /* Trunking is disabled on |
| * the adapter */ |
| BFA_STATUS_IOPROFILE_OFF = 175, /* IO profile OFF */ |
| BFA_STATUS_PHY_NOT_PRESENT = 183, /* PHY module not present */ |
| BFA_STATUS_FEATURE_NOT_SUPPORTED = 192, /* Feature not supported */ |
| BFA_STATUS_ENTRY_EXISTS = 193, /* Entry already exists */ |
| BFA_STATUS_ENTRY_NOT_EXISTS = 194, /* Entry does not exist */ |
| BFA_STATUS_NO_CHANGE = 195, /* Feature already in that state */ |
| BFA_STATUS_FAA_ENABLED = 197, /* FAA is already enabled */ |
| BFA_STATUS_FAA_DISABLED = 198, /* FAA is already disabled */ |
| BFA_STATUS_FAA_ACQUIRED = 199, /* FAA is already acquired */ |
| BFA_STATUS_FAA_ACQ_ADDR = 200, /* Acquiring addr */ |
| BFA_STATUS_ERROR_TRUNK_ENABLED = 203, /* Trunk enabled on adapter */ |
| BFA_STATUS_MAX_ENTRY_REACHED = 212, /* MAX entry reached */ |
| BFA_STATUS_TOPOLOGY_LOOP = 230, /* Topology is set to Loop */ |
| BFA_STATUS_LOOP_UNSUPP_MEZZ = 231, /* Loop topology is not supported |
| * on mezz cards */ |
| BFA_STATUS_DPORT_ENABLED = 235, /* D-port mode is already enabled */ |
| BFA_STATUS_DPORT_DISABLED = 236, /* D-port mode is already disabled */ |
| BFA_STATUS_CMD_NOTSUPP_MEZZ = 239, /* Cmd not supported for MEZZ card */ |
| BFA_STATUS_DPORT_ERR = 245, /* D-port mode is enabled */ |
| BFA_STATUS_MAX_VAL /* Unknown error code */ |
| }; |
| #define bfa_status_t enum bfa_status |
| |
| enum bfa_eproto_status { |
| BFA_EPROTO_BAD_ACCEPT = 0, |
| BFA_EPROTO_UNKNOWN_RSP = 1 |
| }; |
| #define bfa_eproto_status_t enum bfa_eproto_status |
| |
| enum bfa_boolean { |
| BFA_FALSE = 0, |
| BFA_TRUE = 1 |
| }; |
| #define bfa_boolean_t enum bfa_boolean |
| |
| #define BFA_STRING_32 32 |
| #define BFA_VERSION_LEN 64 |
| |
| /* |
| * ---------------------- adapter definitions ------------ |
| */ |
| |
| /* |
| * BFA adapter level attributes. |
| */ |
| enum { |
| BFA_ADAPTER_SERIAL_NUM_LEN = STRSZ(BFA_MFG_SERIALNUM_SIZE), |
| /* |
| *!< adapter serial num length |
| */ |
| BFA_ADAPTER_MODEL_NAME_LEN = 16, /* model name length */ |
| BFA_ADAPTER_MODEL_DESCR_LEN = 128, /* model description length */ |
| BFA_ADAPTER_MFG_NAME_LEN = 8, /* manufacturer name length */ |
| BFA_ADAPTER_SYM_NAME_LEN = 64, /* adapter symbolic name length */ |
| BFA_ADAPTER_OS_TYPE_LEN = 64, /* adapter os type length */ |
| }; |
| |
| struct bfa_adapter_attr_s { |
| char manufacturer[BFA_ADAPTER_MFG_NAME_LEN]; |
| char serial_num[BFA_ADAPTER_SERIAL_NUM_LEN]; |
| u32 card_type; |
| char model[BFA_ADAPTER_MODEL_NAME_LEN]; |
| char model_descr[BFA_ADAPTER_MODEL_DESCR_LEN]; |
| wwn_t pwwn; |
| char node_symname[FC_SYMNAME_MAX]; |
| char hw_ver[BFA_VERSION_LEN]; |
| char fw_ver[BFA_VERSION_LEN]; |
| char optrom_ver[BFA_VERSION_LEN]; |
| char os_type[BFA_ADAPTER_OS_TYPE_LEN]; |
| struct bfa_mfg_vpd_s vpd; |
| struct mac_s mac; |
| |
| u8 nports; |
| u8 max_speed; |
| u8 prototype; |
| char asic_rev; |
| |
| u8 pcie_gen; |
| u8 pcie_lanes_orig; |
| u8 pcie_lanes; |
| u8 cna_capable; |
| |
| u8 is_mezz; |
| u8 trunk_capable; |
| u8 mfg_day; /* manufacturing day */ |
| u8 mfg_month; /* manufacturing month */ |
| u16 mfg_year; /* manufacturing year */ |
| u16 rsvd; |
| }; |
| |
| /* |
| * ---------------------- IOC definitions ------------ |
| */ |
| |
| enum { |
| BFA_IOC_DRIVER_LEN = 16, |
| BFA_IOC_CHIP_REV_LEN = 8, |
| }; |
| |
| /* |
| * Driver and firmware versions. |
| */ |
| struct bfa_ioc_driver_attr_s { |
| char driver[BFA_IOC_DRIVER_LEN]; /* driver name */ |
| char driver_ver[BFA_VERSION_LEN]; /* driver version */ |
| char fw_ver[BFA_VERSION_LEN]; /* firmware version */ |
| char bios_ver[BFA_VERSION_LEN]; /* bios version */ |
| char efi_ver[BFA_VERSION_LEN]; /* EFI version */ |
| char ob_ver[BFA_VERSION_LEN]; /* openboot version */ |
| }; |
| |
| /* |
| * IOC PCI device attributes |
| */ |
| struct bfa_ioc_pci_attr_s { |
| u16 vendor_id; /* PCI vendor ID */ |
| u16 device_id; /* PCI device ID */ |
| u16 ssid; /* subsystem ID */ |
| u16 ssvid; /* subsystem vendor ID */ |
| u32 pcifn; /* PCI device function */ |
| u32 rsvd; /* padding */ |
| char chip_rev[BFA_IOC_CHIP_REV_LEN]; /* chip revision */ |
| }; |
| |
| /* |
| * IOC states |
| */ |
| enum bfa_ioc_state { |
| BFA_IOC_UNINIT = 1, /* IOC is in uninit state */ |
| BFA_IOC_RESET = 2, /* IOC is in reset state */ |
| BFA_IOC_SEMWAIT = 3, /* Waiting for IOC h/w semaphore */ |
| BFA_IOC_HWINIT = 4, /* IOC h/w is being initialized */ |
| BFA_IOC_GETATTR = 5, /* IOC is being configured */ |
| BFA_IOC_OPERATIONAL = 6, /* IOC is operational */ |
| BFA_IOC_INITFAIL = 7, /* IOC hardware failure */ |
| BFA_IOC_FAIL = 8, /* IOC heart-beat failure */ |
| BFA_IOC_DISABLING = 9, /* IOC is being disabled */ |
| BFA_IOC_DISABLED = 10, /* IOC is disabled */ |
| BFA_IOC_FWMISMATCH = 11, /* IOC f/w different from drivers */ |
| BFA_IOC_ENABLING = 12, /* IOC is being enabled */ |
| BFA_IOC_HWFAIL = 13, /* PCI mapping doesn't exist */ |
| BFA_IOC_ACQ_ADDR = 14, /* Acquiring addr from fabric */ |
| }; |
| |
| /* |
| * IOC firmware stats |
| */ |
| struct bfa_fw_ioc_stats_s { |
| u32 enable_reqs; |
| u32 disable_reqs; |
| u32 get_attr_reqs; |
| u32 dbg_sync; |
| u32 dbg_dump; |
| u32 unknown_reqs; |
| }; |
| |
| /* |
| * IOC driver stats |
| */ |
| struct bfa_ioc_drv_stats_s { |
| u32 ioc_isrs; |
| u32 ioc_enables; |
| u32 ioc_disables; |
| u32 ioc_hbfails; |
| u32 ioc_boots; |
| u32 stats_tmos; |
| u32 hb_count; |
| u32 disable_reqs; |
| u32 enable_reqs; |
| u32 disable_replies; |
| u32 enable_replies; |
| u32 rsvd; |
| }; |
| |
| /* |
| * IOC statistics |
| */ |
| struct bfa_ioc_stats_s { |
| struct bfa_ioc_drv_stats_s drv_stats; /* driver IOC stats */ |
| struct bfa_fw_ioc_stats_s fw_stats; /* firmware IOC stats */ |
| }; |
| |
| enum bfa_ioc_type_e { |
| BFA_IOC_TYPE_FC = 1, |
| BFA_IOC_TYPE_FCoE = 2, |
| BFA_IOC_TYPE_LL = 3, |
| }; |
| |
| /* |
| * IOC attributes returned in queries |
| */ |
| struct bfa_ioc_attr_s { |
| enum bfa_ioc_type_e ioc_type; |
| enum bfa_ioc_state state; /* IOC state */ |
| struct bfa_adapter_attr_s adapter_attr; /* HBA attributes */ |
| struct bfa_ioc_driver_attr_s driver_attr; /* driver attr */ |
| struct bfa_ioc_pci_attr_s pci_attr; |
| u8 port_id; /* port number */ |
| u8 port_mode; /* bfa_mode_s */ |
| u8 cap_bm; /* capability */ |
| u8 port_mode_cfg; /* bfa_mode_s */ |
| u8 rsvd[4]; /* 64bit align */ |
| }; |
| |
| /* |
| * AEN related definitions |
| */ |
| enum bfa_aen_category { |
| BFA_AEN_CAT_ADAPTER = 1, |
| BFA_AEN_CAT_PORT = 2, |
| BFA_AEN_CAT_LPORT = 3, |
| BFA_AEN_CAT_RPORT = 4, |
| BFA_AEN_CAT_ITNIM = 5, |
| BFA_AEN_CAT_AUDIT = 8, |
| BFA_AEN_CAT_IOC = 9, |
| }; |
| |
| /* BFA adapter level events */ |
| enum bfa_adapter_aen_event { |
| BFA_ADAPTER_AEN_ADD = 1, /* New Adapter found event */ |
| BFA_ADAPTER_AEN_REMOVE = 2, /* Adapter removed event */ |
| }; |
| |
| struct bfa_adapter_aen_data_s { |
| char serial_num[BFA_ADAPTER_SERIAL_NUM_LEN]; |
| u32 nports; /* Number of NPorts */ |
| wwn_t pwwn; /* WWN of one of its physical port */ |
| }; |
| |
| /* BFA physical port Level events */ |
| enum bfa_port_aen_event { |
| BFA_PORT_AEN_ONLINE = 1, /* Physical Port online event */ |
| BFA_PORT_AEN_OFFLINE = 2, /* Physical Port offline event */ |
| BFA_PORT_AEN_RLIR = 3, /* RLIR event, not supported */ |
| BFA_PORT_AEN_SFP_INSERT = 4, /* SFP inserted event */ |
| BFA_PORT_AEN_SFP_REMOVE = 5, /* SFP removed event */ |
| BFA_PORT_AEN_SFP_POM = 6, /* SFP POM event */ |
| BFA_PORT_AEN_ENABLE = 7, /* Physical Port enable event */ |
| BFA_PORT_AEN_DISABLE = 8, /* Physical Port disable event */ |
| BFA_PORT_AEN_AUTH_ON = 9, /* Physical Port auth success event */ |
| BFA_PORT_AEN_AUTH_OFF = 10, /* Physical Port auth fail event */ |
| BFA_PORT_AEN_DISCONNECT = 11, /* Physical Port disconnect event */ |
| BFA_PORT_AEN_QOS_NEG = 12, /* Base Port QOS negotiation event */ |
| BFA_PORT_AEN_FABRIC_NAME_CHANGE = 13, /* Fabric Name/WWN change */ |
| BFA_PORT_AEN_SFP_ACCESS_ERROR = 14, /* SFP read error event */ |
| BFA_PORT_AEN_SFP_UNSUPPORT = 15, /* Unsupported SFP event */ |
| }; |
| |
| enum bfa_port_aen_sfp_pom { |
| BFA_PORT_AEN_SFP_POM_GREEN = 1, /* Normal */ |
| BFA_PORT_AEN_SFP_POM_AMBER = 2, /* Warning */ |
| BFA_PORT_AEN_SFP_POM_RED = 3, /* Critical */ |
| BFA_PORT_AEN_SFP_POM_MAX = BFA_PORT_AEN_SFP_POM_RED |
| }; |
| |
| struct bfa_port_aen_data_s { |
| wwn_t pwwn; /* WWN of the physical port */ |
| wwn_t fwwn; /* WWN of the fabric port */ |
| u32 phy_port_num; /* For SFP related events */ |
| u16 ioc_type; |
| u16 level; /* Only transitions will be informed */ |
| mac_t mac; /* MAC address of the ethernet port */ |
| u16 rsvd; |
| }; |
| |
| /* BFA AEN logical port events */ |
| enum bfa_lport_aen_event { |
| BFA_LPORT_AEN_NEW = 1, /* LPort created event */ |
| BFA_LPORT_AEN_DELETE = 2, /* LPort deleted event */ |
| BFA_LPORT_AEN_ONLINE = 3, /* LPort online event */ |
| BFA_LPORT_AEN_OFFLINE = 4, /* LPort offline event */ |
| BFA_LPORT_AEN_DISCONNECT = 5, /* LPort disconnect event */ |
| BFA_LPORT_AEN_NEW_PROP = 6, /* VPort created event */ |
| BFA_LPORT_AEN_DELETE_PROP = 7, /* VPort deleted event */ |
| BFA_LPORT_AEN_NEW_STANDARD = 8, /* VPort created event */ |
| BFA_LPORT_AEN_DELETE_STANDARD = 9, /* VPort deleted event */ |
| BFA_LPORT_AEN_NPIV_DUP_WWN = 10, /* VPort with duplicate WWN */ |
| BFA_LPORT_AEN_NPIV_FABRIC_MAX = 11, /* Max NPIV in fabric/fport */ |
| BFA_LPORT_AEN_NPIV_UNKNOWN = 12, /* Unknown NPIV Error code */ |
| }; |
| |
| struct bfa_lport_aen_data_s { |
| u16 vf_id; /* vf_id of this logical port */ |
| u16 roles; /* Logical port mode,IM/TM/IP etc */ |
| u32 rsvd; |
| wwn_t ppwwn; /* WWN of its physical port */ |
| wwn_t lpwwn; /* WWN of this logical port */ |
| }; |
| |
| /* BFA ITNIM events */ |
| enum bfa_itnim_aen_event { |
| BFA_ITNIM_AEN_ONLINE = 1, /* Target online */ |
| BFA_ITNIM_AEN_OFFLINE = 2, /* Target offline */ |
| BFA_ITNIM_AEN_DISCONNECT = 3, /* Target disconnected */ |
| }; |
| |
| struct bfa_itnim_aen_data_s { |
| u16 vf_id; /* vf_id of the IT nexus */ |
| u16 rsvd[3]; |
| wwn_t ppwwn; /* WWN of its physical port */ |
| wwn_t lpwwn; /* WWN of logical port */ |
| wwn_t rpwwn; /* WWN of remote(target) port */ |
| }; |
| |
| /* BFA audit events */ |
| enum bfa_audit_aen_event { |
| BFA_AUDIT_AEN_AUTH_ENABLE = 1, |
| BFA_AUDIT_AEN_AUTH_DISABLE = 2, |
| BFA_AUDIT_AEN_FLASH_ERASE = 3, |
| BFA_AUDIT_AEN_FLASH_UPDATE = 4, |
| }; |
| |
| struct bfa_audit_aen_data_s { |
| wwn_t pwwn; |
| int partition_inst; |
| int partition_type; |
| }; |
| |
| /* BFA IOC level events */ |
| enum bfa_ioc_aen_event { |
| BFA_IOC_AEN_HBGOOD = 1, /* Heart Beat restore event */ |
| BFA_IOC_AEN_HBFAIL = 2, /* Heart Beat failure event */ |
| BFA_IOC_AEN_ENABLE = 3, /* IOC enabled event */ |
| BFA_IOC_AEN_DISABLE = 4, /* IOC disabled event */ |
| BFA_IOC_AEN_FWMISMATCH = 5, /* IOC firmware mismatch */ |
| BFA_IOC_AEN_FWCFG_ERROR = 6, /* IOC firmware config error */ |
| BFA_IOC_AEN_INVALID_VENDOR = 7, |
| BFA_IOC_AEN_INVALID_NWWN = 8, /* Zero NWWN */ |
| BFA_IOC_AEN_INVALID_PWWN = 9 /* Zero PWWN */ |
| }; |
| |
| struct bfa_ioc_aen_data_s { |
| wwn_t pwwn; |
| u16 ioc_type; |
| mac_t mac; |
| }; |
| |
| /* |
| * D-port states |
| * |
| */ |
| enum bfa_dport_state { |
| BFA_DPORT_ST_DISABLED = 0, /* D-port is Disabled */ |
| BFA_DPORT_ST_DISABLING = 1, /* D-port is Disabling */ |
| BFA_DPORT_ST_ENABLING = 2, /* D-port is Enabling */ |
| BFA_DPORT_ST_ENABLED = 3, /* D-port is Enabled */ |
| }; |
| |
| /* |
| * ---------------------- mfg definitions ------------ |
| */ |
| |
| /* |
| * Checksum size |
| */ |
| #define BFA_MFG_CHKSUM_SIZE 16 |
| |
| #define BFA_MFG_PARTNUM_SIZE 14 |
| #define BFA_MFG_SUPPLIER_ID_SIZE 10 |
| #define BFA_MFG_SUPPLIER_PARTNUM_SIZE 20 |
| #define BFA_MFG_SUPPLIER_SERIALNUM_SIZE 20 |
| #define BFA_MFG_SUPPLIER_REVISION_SIZE 4 |
| /* |
| * Initial capability definition |
| */ |
| #define BFA_MFG_IC_FC 0x01 |
| #define BFA_MFG_IC_ETH 0x02 |
| |
| /* |
| * Adapter capability mask definition |
| */ |
| #define BFA_CM_HBA 0x01 |
| #define BFA_CM_CNA 0x02 |
| #define BFA_CM_NIC 0x04 |
| #define BFA_CM_FC16G 0x08 |
| #define BFA_CM_SRIOV 0x10 |
| #define BFA_CM_MEZZ 0x20 |
| |
| #pragma pack(1) |
| |
| /* |
| * All numerical fields are in big-endian format. |
| */ |
| struct bfa_mfg_block_s { |
| u8 version; /*!< manufacturing block version */ |
| u8 mfg_sig[3]; /*!< characters 'M', 'F', 'G' */ |
| u16 mfgsize; /*!< mfg block size */ |
| u16 u16_chksum; /*!< old u16 checksum */ |
| char brcd_serialnum[STRSZ(BFA_MFG_SERIALNUM_SIZE)]; |
| char brcd_partnum[STRSZ(BFA_MFG_PARTNUM_SIZE)]; |
| u8 mfg_day; /*!< manufacturing day */ |
| u8 mfg_month; /*!< manufacturing month */ |
| u16 mfg_year; /*!< manufacturing year */ |
| wwn_t mfg_wwn; /*!< wwn base for this adapter */ |
| u8 num_wwn; /*!< number of wwns assigned */ |
| u8 mfg_speeds; /*!< speeds allowed for this adapter */ |
| u8 rsv[2]; |
| char supplier_id[STRSZ(BFA_MFG_SUPPLIER_ID_SIZE)]; |
| char supplier_partnum[STRSZ(BFA_MFG_SUPPLIER_PARTNUM_SIZE)]; |
| char supplier_serialnum[STRSZ(BFA_MFG_SUPPLIER_SERIALNUM_SIZE)]; |
| char supplier_revision[STRSZ(BFA_MFG_SUPPLIER_REVISION_SIZE)]; |
| mac_t mfg_mac; /*!< base mac address */ |
| u8 num_mac; /*!< number of mac addresses */ |
| u8 rsv2; |
| u32 card_type; /*!< card type */ |
| char cap_nic; /*!< capability nic */ |
| char cap_cna; /*!< capability cna */ |
| char cap_hba; /*!< capability hba */ |
| char cap_fc16g; /*!< capability fc 16g */ |
| char cap_sriov; /*!< capability sriov */ |
| char cap_mezz; /*!< capability mezz */ |
| u8 rsv3; |
| u8 mfg_nports; /*!< number of ports */ |
| char media[8]; /*!< xfi/xaui */ |
| char initial_mode[8]; /*!< initial mode: hba/cna/nic */ |
| u8 rsv4[84]; |
| u8 md5_chksum[BFA_MFG_CHKSUM_SIZE]; /*!< md5 checksum */ |
| }; |
| |
| #pragma pack() |
| |
| /* |
| * ---------------------- pci definitions ------------ |
| */ |
| |
| /* |
| * PCI device and vendor ID information |
| */ |
| enum { |
| BFA_PCI_VENDOR_ID_BROCADE = 0x1657, |
| BFA_PCI_DEVICE_ID_FC_8G2P = 0x13, |
| BFA_PCI_DEVICE_ID_FC_8G1P = 0x17, |
| BFA_PCI_DEVICE_ID_CT = 0x14, |
| BFA_PCI_DEVICE_ID_CT_FC = 0x21, |
| BFA_PCI_DEVICE_ID_CT2 = 0x22, |
| }; |
| |
| #define bfa_asic_id_cb(__d) \ |
| ((__d) == BFA_PCI_DEVICE_ID_FC_8G2P || \ |
| (__d) == BFA_PCI_DEVICE_ID_FC_8G1P) |
| #define bfa_asic_id_ct(__d) \ |
| ((__d) == BFA_PCI_DEVICE_ID_CT || \ |
| (__d) == BFA_PCI_DEVICE_ID_CT_FC) |
| #define bfa_asic_id_ct2(__d) ((__d) == BFA_PCI_DEVICE_ID_CT2) |
| #define bfa_asic_id_ctc(__d) \ |
| (bfa_asic_id_ct(__d) || bfa_asic_id_ct2(__d)) |
| |
| /* |
| * PCI sub-system device and vendor ID information |
| */ |
| enum { |
| BFA_PCI_FCOE_SSDEVICE_ID = 0x14, |
| BFA_PCI_CT2_SSID_FCoE = 0x22, |
| BFA_PCI_CT2_SSID_ETH = 0x23, |
| BFA_PCI_CT2_SSID_FC = 0x24, |
| }; |
| |
| /* |
| * Maximum number of device address ranges mapped through different BAR(s) |
| */ |
| #define BFA_PCI_ACCESS_RANGES 1 |
| |
| /* |
| * Port speed settings. Each specific speed is a bit field. Use multiple |
| * bits to specify speeds to be selected for auto-negotiation. |
| */ |
| enum bfa_port_speed { |
| BFA_PORT_SPEED_UNKNOWN = 0, |
| BFA_PORT_SPEED_1GBPS = 1, |
| BFA_PORT_SPEED_2GBPS = 2, |
| BFA_PORT_SPEED_4GBPS = 4, |
| BFA_PORT_SPEED_8GBPS = 8, |
| BFA_PORT_SPEED_10GBPS = 10, |
| BFA_PORT_SPEED_16GBPS = 16, |
| BFA_PORT_SPEED_AUTO = 0xf, |
| }; |
| #define bfa_port_speed_t enum bfa_port_speed |
| |
| enum { |
| BFA_BOOT_BOOTLUN_MAX = 4, /* maximum boot lun per IOC */ |
| BFA_PREBOOT_BOOTLUN_MAX = 8, /* maximum preboot lun per IOC */ |
| }; |
| |
| #define BOOT_CFG_REV1 1 |
| #define BOOT_CFG_VLAN 1 |
| |
| /* |
| * Boot options setting. Boot options setting determines from where |
| * to get the boot lun information |
| */ |
| enum bfa_boot_bootopt { |
| BFA_BOOT_AUTO_DISCOVER = 0, /* Boot from blun provided by fabric */ |
| BFA_BOOT_STORED_BLUN = 1, /* Boot from bluns stored in flash */ |
| BFA_BOOT_FIRST_LUN = 2, /* Boot from first discovered blun */ |
| BFA_BOOT_PBC = 3, /* Boot from pbc configured blun */ |
| }; |
| |
| #pragma pack(1) |
| /* |
| * Boot lun information. |
| */ |
| struct bfa_boot_bootlun_s { |
| wwn_t pwwn; /* port wwn of target */ |
| struct scsi_lun lun; /* 64-bit lun */ |
| }; |
| #pragma pack() |
| |
| /* |
| * BOOT boot configuraton |
| */ |
| struct bfa_boot_cfg_s { |
| u8 version; |
| u8 rsvd1; |
| u16 chksum; |
| u8 enable; /* enable/disable SAN boot */ |
| u8 speed; /* boot speed settings */ |
| u8 topology; /* boot topology setting */ |
| u8 bootopt; /* bfa_boot_bootopt_t */ |
| u32 nbluns; /* number of boot luns */ |
| u32 rsvd2; |
| struct bfa_boot_bootlun_s blun[BFA_BOOT_BOOTLUN_MAX]; |
| struct bfa_boot_bootlun_s blun_disc[BFA_BOOT_BOOTLUN_MAX]; |
| }; |
| |
| struct bfa_boot_pbc_s { |
| u8 enable; /* enable/disable SAN boot */ |
| u8 speed; /* boot speed settings */ |
| u8 topology; /* boot topology setting */ |
| u8 rsvd1; |
| u32 nbluns; /* number of boot luns */ |
| struct bfa_boot_bootlun_s pblun[BFA_PREBOOT_BOOTLUN_MAX]; |
| }; |
| |
| struct bfa_ethboot_cfg_s { |
| u8 version; |
| u8 rsvd1; |
| u16 chksum; |
| u8 enable; /* enable/disable Eth/PXE boot */ |
| u8 rsvd2; |
| u16 vlan; |
| }; |
| |
| /* |
| * ASIC block configuration related structures |
| */ |
| #define BFA_ABLK_MAX_PORTS 2 |
| #define BFA_ABLK_MAX_PFS 16 |
| #define BFA_ABLK_MAX 2 |
| |
| #pragma pack(1) |
| enum bfa_mode_s { |
| BFA_MODE_HBA = 1, |
| BFA_MODE_CNA = 2, |
| BFA_MODE_NIC = 3 |
| }; |
| |
| struct bfa_adapter_cfg_mode_s { |
| u16 max_pf; |
| u16 max_vf; |
| enum bfa_mode_s mode; |
| }; |
| |
| struct bfa_ablk_cfg_pf_s { |
| u16 pers; |
| u8 port_id; |
| u8 optrom; |
| u8 valid; |
| u8 sriov; |
| u8 max_vfs; |
| u8 rsvd[1]; |
| u16 num_qpairs; |
| u16 num_vectors; |
| u32 bw; |
| }; |
| |
| struct bfa_ablk_cfg_port_s { |
| u8 mode; |
| u8 type; |
| u8 max_pfs; |
| u8 rsvd[5]; |
| }; |
| |
| struct bfa_ablk_cfg_inst_s { |
| u8 nports; |
| u8 max_pfs; |
| u8 rsvd[6]; |
| struct bfa_ablk_cfg_pf_s pf_cfg[BFA_ABLK_MAX_PFS]; |
| struct bfa_ablk_cfg_port_s port_cfg[BFA_ABLK_MAX_PORTS]; |
| }; |
| |
| struct bfa_ablk_cfg_s { |
| struct bfa_ablk_cfg_inst_s inst[BFA_ABLK_MAX]; |
| }; |
| |
| |
| /* |
| * SFP module specific |
| */ |
| #define SFP_DIAGMON_SIZE 10 /* num bytes of diag monitor data */ |
| |
| /* SFP state change notification event */ |
| #define BFA_SFP_SCN_REMOVED 0 |
| #define BFA_SFP_SCN_INSERTED 1 |
| #define BFA_SFP_SCN_POM 2 |
| #define BFA_SFP_SCN_FAILED 3 |
| #define BFA_SFP_SCN_UNSUPPORT 4 |
| #define BFA_SFP_SCN_VALID 5 |
| |
| enum bfa_defs_sfp_media_e { |
| BFA_SFP_MEDIA_UNKNOWN = 0x00, |
| BFA_SFP_MEDIA_CU = 0x01, |
| BFA_SFP_MEDIA_LW = 0x02, |
| BFA_SFP_MEDIA_SW = 0x03, |
| BFA_SFP_MEDIA_EL = 0x04, |
| BFA_SFP_MEDIA_UNSUPPORT = 0x05, |
| }; |
| |
| /* |
| * values for xmtr_tech above |
| */ |
| enum { |
| SFP_XMTR_TECH_CU = (1 << 0), /* copper FC-BaseT */ |
| SFP_XMTR_TECH_CP = (1 << 1), /* copper passive */ |
| SFP_XMTR_TECH_CA = (1 << 2), /* copper active */ |
| SFP_XMTR_TECH_LL = (1 << 3), /* longwave laser */ |
| SFP_XMTR_TECH_SL = (1 << 4), /* shortwave laser w/ OFC */ |
| SFP_XMTR_TECH_SN = (1 << 5), /* shortwave laser w/o OFC */ |
| SFP_XMTR_TECH_EL_INTRA = (1 << 6), /* elec intra-enclosure */ |
| SFP_XMTR_TECH_EL_INTER = (1 << 7), /* elec inter-enclosure */ |
| SFP_XMTR_TECH_LC = (1 << 8), /* longwave laser */ |
| SFP_XMTR_TECH_SA = (1 << 9) |
| }; |
| |
| /* |
| * Serial ID: Data Fields -- Address A0h |
| * Basic ID field total 64 bytes |
| */ |
| struct sfp_srlid_base_s { |
| u8 id; /* 00: Identifier */ |
| u8 extid; /* 01: Extended Identifier */ |
| u8 connector; /* 02: Connector */ |
| u8 xcvr[8]; /* 03-10: Transceiver */ |
| u8 encoding; /* 11: Encoding */ |
| u8 br_norm; /* 12: BR, Nominal */ |
| u8 rate_id; /* 13: Rate Identifier */ |
| u8 len_km; /* 14: Length single mode km */ |
| u8 len_100m; /* 15: Length single mode 100m */ |
| u8 len_om2; /* 16: Length om2 fiber 10m */ |
| u8 len_om1; /* 17: Length om1 fiber 10m */ |
| u8 len_cu; /* 18: Length copper 1m */ |
| u8 len_om3; /* 19: Length om3 fiber 10m */ |
| u8 vendor_name[16];/* 20-35 */ |
| u8 unalloc1; |
| u8 vendor_oui[3]; /* 37-39 */ |
| u8 vendor_pn[16]; /* 40-55 */ |
| u8 vendor_rev[4]; /* 56-59 */ |
| u8 wavelen[2]; /* 60-61 */ |
| u8 unalloc2; |
| u8 cc_base; /* 63: check code for base id field */ |
| }; |
| |
| /* |
| * Serial ID: Data Fields -- Address A0h |
| * Extended id field total 32 bytes |
| */ |
| struct sfp_srlid_ext_s { |
| u8 options[2]; |
| u8 br_max; |
| u8 br_min; |
| u8 vendor_sn[16]; |
| u8 date_code[8]; |
| u8 diag_mon_type; /* 92: Diagnostic Monitoring type */ |
| u8 en_options; |
| u8 sff_8472; |
| u8 cc_ext; |
| }; |
| |
| /* |
| * Diagnostic: Data Fields -- Address A2h |
| * Diagnostic and control/status base field total 96 bytes |
| */ |
| struct sfp_diag_base_s { |
| /* |
| * Alarm and warning Thresholds 40 bytes |
| */ |
| u8 temp_high_alarm[2]; /* 00-01 */ |
| u8 temp_low_alarm[2]; /* 02-03 */ |
| u8 temp_high_warning[2]; /* 04-05 */ |
| u8 temp_low_warning[2]; /* 06-07 */ |
| |
| u8 volt_high_alarm[2]; /* 08-09 */ |
| u8 volt_low_alarm[2]; /* 10-11 */ |
| u8 volt_high_warning[2]; /* 12-13 */ |
| u8 volt_low_warning[2]; /* 14-15 */ |
| |
| u8 bias_high_alarm[2]; /* 16-17 */ |
| u8 bias_low_alarm[2]; /* 18-19 */ |
| u8 bias_high_warning[2]; /* 20-21 */ |
| u8 bias_low_warning[2]; /* 22-23 */ |
| |
| u8 tx_pwr_high_alarm[2]; /* 24-25 */ |
| u8 tx_pwr_low_alarm[2]; /* 26-27 */ |
| u8 tx_pwr_high_warning[2]; /* 28-29 */ |
| u8 tx_pwr_low_warning[2]; /* 30-31 */ |
| |
| u8 rx_pwr_high_alarm[2]; /* 32-33 */ |
| u8 rx_pwr_low_alarm[2]; /* 34-35 */ |
| u8 rx_pwr_high_warning[2]; /* 36-37 */ |
| u8 rx_pwr_low_warning[2]; /* 38-39 */ |
| |
| u8 unallocate_1[16]; |
| |
| /* |
| * ext_cal_const[36] |
| */ |
| u8 rx_pwr[20]; |
| u8 tx_i[4]; |
| u8 tx_pwr[4]; |
| u8 temp[4]; |
| u8 volt[4]; |
| u8 unallocate_2[3]; |
| u8 cc_dmi; |
| }; |
| |
| /* |
| * Diagnostic: Data Fields -- Address A2h |
| * Diagnostic and control/status extended field total 24 bytes |
| */ |
| struct sfp_diag_ext_s { |
| u8 diag[SFP_DIAGMON_SIZE]; |
| u8 unalloc1[4]; |
| u8 status_ctl; |
| u8 rsvd; |
| u8 alarm_flags[2]; |
| u8 unalloc2[2]; |
| u8 warning_flags[2]; |
| u8 ext_status_ctl[2]; |
| }; |
| |
| struct sfp_mem_s { |
| struct sfp_srlid_base_s srlid_base; |
| struct sfp_srlid_ext_s srlid_ext; |
| struct sfp_diag_base_s diag_base; |
| struct sfp_diag_ext_s diag_ext; |
| }; |
| |
| /* |
| * transceiver codes (SFF-8472 Rev 10.2 Table 3.5) |
| */ |
| union sfp_xcvr_e10g_code_u { |
| u8 b; |
| struct { |
| #ifdef __BIG_ENDIAN |
| u8 e10g_unall:1; /* 10G Ethernet compliance */ |
| u8 e10g_lrm:1; |
| u8 e10g_lr:1; |
| u8 e10g_sr:1; |
| u8 ib_sx:1; /* Infiniband compliance */ |
| u8 ib_lx:1; |
| u8 ib_cu_a:1; |
| u8 ib_cu_p:1; |
| #else |
| u8 ib_cu_p:1; |
| u8 ib_cu_a:1; |
| u8 ib_lx:1; |
| u8 ib_sx:1; /* Infiniband compliance */ |
| u8 e10g_sr:1; |
| u8 e10g_lr:1; |
| u8 e10g_lrm:1; |
| u8 e10g_unall:1; /* 10G Ethernet compliance */ |
| #endif |
| } r; |
| }; |
| |
| union sfp_xcvr_so1_code_u { |
| u8 b; |
| struct { |
| u8 escon:2; /* ESCON compliance code */ |
| u8 oc192_reach:1; /* SONET compliance code */ |
| u8 so_reach:2; |
| u8 oc48_reach:3; |
| } r; |
| }; |
| |
| union sfp_xcvr_so2_code_u { |
| u8 b; |
| struct { |
| u8 reserved:1; |
| u8 oc12_reach:3; /* OC12 reach */ |
| u8 reserved1:1; |
| u8 oc3_reach:3; /* OC3 reach */ |
| } r; |
| }; |
| |
| union sfp_xcvr_eth_code_u { |
| u8 b; |
| struct { |
| u8 base_px:1; |
| u8 base_bx10:1; |
| u8 e100base_fx:1; |
| u8 e100base_lx:1; |
| u8 e1000base_t:1; |
| u8 e1000base_cx:1; |
| u8 e1000base_lx:1; |
| u8 e1000base_sx:1; |
| } r; |
| }; |
| |
| struct sfp_xcvr_fc1_code_s { |
| u8 link_len:5; /* FC link length */ |
| u8 xmtr_tech2:3; |
| u8 xmtr_tech1:7; /* FC transmitter technology */ |
| u8 reserved1:1; |
| }; |
| |
| union sfp_xcvr_fc2_code_u { |
| u8 b; |
| struct { |
| u8 tw_media:1; /* twin axial pair (tw) */ |
| u8 tp_media:1; /* shielded twisted pair (sp) */ |
| u8 mi_media:1; /* miniature coax (mi) */ |
| u8 tv_media:1; /* video coax (tv) */ |
| u8 m6_media:1; /* multimode, 62.5m (m6) */ |
| u8 m5_media:1; /* multimode, 50m (m5) */ |
| u8 reserved:1; |
| u8 sm_media:1; /* single mode (sm) */ |
| } r; |
| }; |
| |
| union sfp_xcvr_fc3_code_u { |
| u8 b; |
| struct { |
| #ifdef __BIG_ENDIAN |
| u8 rsv4:1; |
| u8 mb800:1; /* 800 Mbytes/sec */ |
| u8 mb1600:1; /* 1600 Mbytes/sec */ |
| u8 mb400:1; /* 400 Mbytes/sec */ |
| u8 rsv2:1; |
| u8 mb200:1; /* 200 Mbytes/sec */ |
| u8 rsv1:1; |
| u8 mb100:1; /* 100 Mbytes/sec */ |
| #else |
| u8 mb100:1; /* 100 Mbytes/sec */ |
| u8 rsv1:1; |
| u8 mb200:1; /* 200 Mbytes/sec */ |
| u8 rsv2:1; |
| u8 mb400:1; /* 400 Mbytes/sec */ |
| u8 mb1600:1; /* 1600 Mbytes/sec */ |
| u8 mb800:1; /* 800 Mbytes/sec */ |
| u8 rsv4:1; |
| #endif |
| } r; |
| }; |
| |
| struct sfp_xcvr_s { |
| union sfp_xcvr_e10g_code_u e10g; |
| union sfp_xcvr_so1_code_u so1; |
| union sfp_xcvr_so2_code_u so2; |
| union sfp_xcvr_eth_code_u eth; |
| struct sfp_xcvr_fc1_code_s fc1; |
| union sfp_xcvr_fc2_code_u fc2; |
| union sfp_xcvr_fc3_code_u fc3; |
| }; |
| |
| /* |
| * Flash module specific |
| */ |
| #define BFA_FLASH_PART_ENTRY_SIZE 32 /* partition entry size */ |
| #define BFA_FLASH_PART_MAX 32 /* maximal # of partitions */ |
| |
| enum bfa_flash_part_type { |
| BFA_FLASH_PART_OPTROM = 1, /* option rom partition */ |
| BFA_FLASH_PART_FWIMG = 2, /* firmware image partition */ |
| BFA_FLASH_PART_FWCFG = 3, /* firmware tuneable config */ |
| BFA_FLASH_PART_DRV = 4, /* IOC driver config */ |
| BFA_FLASH_PART_BOOT = 5, /* boot config */ |
| BFA_FLASH_PART_ASIC = 6, /* asic bootstrap configuration */ |
| BFA_FLASH_PART_MFG = 7, /* manufacturing block partition */ |
| BFA_FLASH_PART_OPTROM2 = 8, /* 2nd option rom partition */ |
| BFA_FLASH_PART_VPD = 9, /* vpd data of OEM info */ |
| BFA_FLASH_PART_PBC = 10, /* pre-boot config */ |
| BFA_FLASH_PART_BOOTOVL = 11, /* boot overlay partition */ |
| BFA_FLASH_PART_LOG = 12, /* firmware log partition */ |
| BFA_FLASH_PART_PXECFG = 13, /* pxe boot config partition */ |
| BFA_FLASH_PART_PXEOVL = 14, /* pxe boot overlay partition */ |
| BFA_FLASH_PART_PORTCFG = 15, /* port cfg partition */ |
| BFA_FLASH_PART_ASICBK = 16, /* asic backup partition */ |
| }; |
| |
| /* |
| * flash partition attributes |
| */ |
| struct bfa_flash_part_attr_s { |
| u32 part_type; /* partition type */ |
| u32 part_instance; /* partition instance */ |
| u32 part_off; /* partition offset */ |
| u32 part_size; /* partition size */ |
| u32 part_len; /* partition content length */ |
| u32 part_status; /* partition status */ |
| char rsv[BFA_FLASH_PART_ENTRY_SIZE - 24]; |
| }; |
| |
| /* |
| * flash attributes |
| */ |
| struct bfa_flash_attr_s { |
| u32 status; /* flash overall status */ |
| u32 npart; /* num of partitions */ |
| struct bfa_flash_part_attr_s part[BFA_FLASH_PART_MAX]; |
| }; |
| |
| /* |
| * DIAG module specific |
| */ |
| #define LB_PATTERN_DEFAULT 0xB5B5B5B5 |
| #define QTEST_CNT_DEFAULT 10 |
| #define QTEST_PAT_DEFAULT LB_PATTERN_DEFAULT |
| |
| struct bfa_diag_memtest_s { |
| u8 algo; |
| u8 rsvd[7]; |
| }; |
| |
| struct bfa_diag_memtest_result { |
| u32 status; |
| u32 addr; |
| u32 exp; /* expect value read from reg */ |
| u32 act; /* actually value read */ |
| u32 err_status; /* error status reg */ |
| u32 err_status1; /* extra error info reg */ |
| u32 err_addr; /* error address reg */ |
| u8 algo; |
| u8 rsv[3]; |
| }; |
| |
| struct bfa_diag_loopback_result_s { |
| u32 numtxmfrm; /* no. of transmit frame */ |
| u32 numosffrm; /* no. of outstanding frame */ |
| u32 numrcvfrm; /* no. of received good frame */ |
| u32 badfrminf; /* mis-match info */ |
| u32 badfrmnum; /* mis-match fram number */ |
| u8 status; /* loopback test result */ |
| u8 rsvd[3]; |
| }; |
| |
| struct bfa_diag_ledtest_s { |
| u32 cmd; /* bfa_led_op_t */ |
| u32 color; /* bfa_led_color_t */ |
| u16 freq; /* no. of blinks every 10 secs */ |
| u8 led; /* bitmap of LEDs to be tested */ |
| u8 rsvd[5]; |
| }; |
| |
| struct bfa_diag_loopback_s { |
| u32 loopcnt; |
| u32 pattern; |
| u8 lb_mode; /* bfa_port_opmode_t */ |
| u8 speed; /* bfa_port_speed_t */ |
| u8 rsvd[2]; |
| }; |
| |
| /* |
| * PHY module specific |
| */ |
| enum bfa_phy_status_e { |
| BFA_PHY_STATUS_GOOD = 0, /* phy is good */ |
| BFA_PHY_STATUS_NOT_PRESENT = 1, /* phy does not exist */ |
| BFA_PHY_STATUS_BAD = 2, /* phy is bad */ |
| }; |
| |
| /* |
| * phy attributes for phy query |
| */ |
| struct bfa_phy_attr_s { |
| u32 status; /* phy present/absent status */ |
| u32 length; /* firmware length */ |
| u32 fw_ver; /* firmware version */ |
| u32 an_status; /* AN status */ |
| u32 pma_pmd_status; /* PMA/PMD link status */ |
| u32 pma_pmd_signal; /* PMA/PMD signal detect */ |
| u32 pcs_status; /* PCS link status */ |
| }; |
| |
| /* |
| * phy stats |
| */ |
| struct bfa_phy_stats_s { |
| u32 status; /* phy stats status */ |
| u32 link_breaks; /* Num of link breaks after linkup */ |
| u32 pma_pmd_fault; /* NPMA/PMD fault */ |
| u32 pcs_fault; /* PCS fault */ |
| u32 speed_neg; /* Num of speed negotiation */ |
| u32 tx_eq_training; /* Num of TX EQ training */ |
| u32 tx_eq_timeout; /* Num of TX EQ timeout */ |
| u32 crc_error; /* Num of CRC errors */ |
| }; |
| |
| #pragma pack() |
| |
| #endif /* __BFA_DEFS_H__ */ |