diff --git a/drivers/gpu/drm/i915/Makefile b/drivers/gpu/drm/i915/Makefile
index 75318eb..6092f0e 100644
--- a/drivers/gpu/drm/i915/Makefile
+++ b/drivers/gpu/drm/i915/Makefile
@@ -33,6 +33,7 @@
 	  i915_gem_gtt.o \
 	  i915_gem.o \
 	  i915_gem_render_state.o \
+	  i915_gem_request.o \
 	  i915_gem_shrinker.o \
 	  i915_gem_stolen.o \
 	  i915_gem_tiling.o \
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 27d9b2c..c97a755 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -61,6 +61,7 @@
 #include "i915_gem.h"
 #include "i915_gem_gtt.h"
 #include "i915_gem_render_state.h"
+#include "i915_gem_request.h"
 
 #include "intel_gvt.h"
 
@@ -2365,171 +2366,6 @@
 	     (((__iter).curr += PAGE_SIZE) < (__iter).max) ||		\
 	     ((__iter) = __sgt_iter(__sg_next((__iter).sgp), false), 0))
 
-/**
- * Request queue structure.
- *
- * The request queue allows us to note sequence numbers that have been emitted
- * and may be associated with active buffers to be retired.
- *
- * By keeping this list, we can avoid having to do questionable sequence
- * number comparisons on buffer last_read|write_seqno. It also allows an
- * emission time to be associated with the request for tracking how far ahead
- * of the GPU the submission is.
- *
- * The requests are reference counted, so upon creation they should have an
- * initial reference taken using kref_init
- */
-struct drm_i915_gem_request {
-	struct kref ref;
-
-	/** On Which ring this request was generated */
-	struct drm_i915_private *i915;
-	struct intel_engine_cs *engine;
-	struct intel_signal_node signaling;
-
-	 /** GEM sequence number associated with the previous request,
-	  * when the HWS breadcrumb is equal to this the GPU is processing
-	  * this request.
-	  */
-	u32 previous_seqno;
-
-	 /** GEM sequence number associated with this request,
-	  * when the HWS breadcrumb is equal or greater than this the GPU
-	  * has finished processing this request.
-	  */
-	u32 seqno;
-
-	/** Position in the ringbuffer of the start of the request */
-	u32 head;
-
-	/**
-	 * Position in the ringbuffer of the start of the postfix.
-	 * This is required to calculate the maximum available ringbuffer
-	 * space without overwriting the postfix.
-	 */
-	 u32 postfix;
-
-	/** Position in the ringbuffer of the end of the whole request */
-	u32 tail;
-
-	/** Preallocate space in the ringbuffer for the emitting the request */
-	u32 reserved_space;
-
-	/**
-	 * Context and ring buffer related to this request
-	 * Contexts are refcounted, so when this request is associated with a
-	 * context, we must increment the context's refcount, to guarantee that
-	 * it persists while any request is linked to it. Requests themselves
-	 * are also refcounted, so the request will only be freed when the last
-	 * reference to it is dismissed, and the code in
-	 * i915_gem_request_free() will then decrement the refcount on the
-	 * context.
-	 */
-	struct i915_gem_context *ctx;
-	struct intel_ringbuffer *ringbuf;
-
-	/**
-	 * Context related to the previous request.
-	 * As the contexts are accessed by the hardware until the switch is
-	 * completed to a new context, the hardware may still be writing
-	 * to the context object after the breadcrumb is visible. We must
-	 * not unpin/unbind/prune that object whilst still active and so
-	 * we keep the previous context pinned until the following (this)
-	 * request is retired.
-	 */
-	struct i915_gem_context *previous_context;
-
-	/** Batch buffer related to this request if any (used for
-	    error state dump only) */
-	struct drm_i915_gem_object *batch_obj;
-
-	/** Time at which this request was emitted, in jiffies. */
-	unsigned long emitted_jiffies;
-
-	/** global list entry for this request */
-	struct list_head list;
-
-	struct drm_i915_file_private *file_priv;
-	/** file_priv list entry for this request */
-	struct list_head client_list;
-
-	/** process identifier submitting this request */
-	struct pid *pid;
-
-	/**
-	 * The ELSP only accepts two elements at a time, so we queue
-	 * context/tail pairs on a given queue (ring->execlist_queue) until the
-	 * hardware is available. The queue serves a double purpose: we also use
-	 * it to keep track of the up to 2 contexts currently in the hardware
-	 * (usually one in execution and the other queued up by the GPU): We
-	 * only remove elements from the head of the queue when the hardware
-	 * informs us that an element has been completed.
-	 *
-	 * All accesses to the queue are mediated by a spinlock
-	 * (ring->execlist_lock).
-	 */
-
-	/** Execlist link in the submission queue.*/
-	struct list_head execlist_link;
-
-	/** Execlists no. of times this request has been sent to the ELSP */
-	int elsp_submitted;
-
-	/** Execlists context hardware id. */
-	unsigned ctx_hw_id;
-};
-
-struct drm_i915_gem_request * __must_check
-i915_gem_request_alloc(struct intel_engine_cs *engine,
-		       struct i915_gem_context *ctx);
-void i915_gem_request_free(struct kref *req_ref);
-int i915_gem_request_add_to_client(struct drm_i915_gem_request *req,
-				   struct drm_file *file);
-
-static inline uint32_t
-i915_gem_request_get_seqno(struct drm_i915_gem_request *req)
-{
-	return req ? req->seqno : 0;
-}
-
-static inline struct intel_engine_cs *
-i915_gem_request_get_engine(struct drm_i915_gem_request *req)
-{
-	return req ? req->engine : NULL;
-}
-
-static inline struct drm_i915_gem_request *
-i915_gem_request_reference(struct drm_i915_gem_request *req)
-{
-	if (req)
-		kref_get(&req->ref);
-	return req;
-}
-
-static inline void
-i915_gem_request_unreference(struct drm_i915_gem_request *req)
-{
-	kref_put(&req->ref, i915_gem_request_free);
-}
-
-static inline void i915_gem_request_assign(struct drm_i915_gem_request **pdst,
-					   struct drm_i915_gem_request *src)
-{
-	if (src)
-		i915_gem_request_reference(src);
-
-	if (*pdst)
-		i915_gem_request_unreference(*pdst);
-
-	*pdst = src;
-}
-
-/*
- * XXX: i915_gem_request_completed should be here but currently needs the
- * definition of i915_seqno_passed() which is below. It will be moved in
- * a later patch when the call to i915_seqno_passed() is obsoleted...
- */
-
 /*
  * A command that requires special handling by the command parser.
  */
@@ -3297,37 +3133,6 @@
 		       struct drm_i915_gem_object *new,
 		       unsigned frontbuffer_bits);
 
-/**
- * Returns true if seq1 is later than seq2.
- */
-static inline bool
-i915_seqno_passed(uint32_t seq1, uint32_t seq2)
-{
-	return (int32_t)(seq1 - seq2) >= 0;
-}
-
-static inline bool i915_gem_request_started(const struct drm_i915_gem_request *req)
-{
-	return i915_seqno_passed(intel_engine_get_seqno(req->engine),
-				 req->previous_seqno);
-}
-
-static inline bool i915_gem_request_completed(const struct drm_i915_gem_request *req)
-{
-	return i915_seqno_passed(intel_engine_get_seqno(req->engine),
-				 req->seqno);
-}
-
-bool __i915_spin_request(const struct drm_i915_gem_request *request,
-			 int state, unsigned long timeout_us);
-static inline bool i915_spin_request(const struct drm_i915_gem_request *request,
-				     int state, unsigned long timeout_us)
-{
-	return (i915_gem_request_started(request) &&
-		__i915_spin_request(request, state, timeout_us));
-}
-
-int __must_check i915_gem_get_seqno(struct drm_i915_private *dev_priv, u32 *seqno);
 int __must_check i915_gem_set_seqno(struct drm_device *dev, u32 seqno);
 
 struct drm_i915_gem_request *
@@ -3385,18 +3190,6 @@
 int __must_check i915_gem_wait_for_idle(struct drm_i915_private *dev_priv);
 int __must_check i915_gem_suspend(struct drm_device *dev);
 void i915_gem_resume(struct drm_device *dev);
-void __i915_add_request(struct drm_i915_gem_request *req,
-			struct drm_i915_gem_object *batch_obj,
-			bool flush_caches);
-#define i915_add_request(req) \
-	__i915_add_request(req, NULL, true)
-#define i915_add_request_no_flush(req) \
-	__i915_add_request(req, NULL, false)
-int __i915_wait_request(struct drm_i915_gem_request *req,
-			bool interruptible,
-			s64 *timeout,
-			struct intel_rps_client *rps);
-int __must_check i915_wait_request(struct drm_i915_gem_request *req);
 int i915_gem_fault(struct vm_area_struct *vma, struct vm_fault *vmf);
 int __must_check
 i915_gem_object_wait_rendering(struct drm_i915_gem_object *obj,
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index e40fab1..6df1405 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -1325,365 +1325,6 @@
 	return ret;
 }
 
-static int
-i915_gem_check_wedge(unsigned reset_counter, bool interruptible)
-{
-	if (__i915_terminally_wedged(reset_counter))
-		return -EIO;
-
-	if (__i915_reset_in_progress(reset_counter)) {
-		/* Non-interruptible callers can't handle -EAGAIN, hence return
-		 * -EIO unconditionally for these. */
-		if (!interruptible)
-			return -EIO;
-
-		return -EAGAIN;
-	}
-
-	return 0;
-}
-
-static unsigned long local_clock_us(unsigned *cpu)
-{
-	unsigned long t;
-
-	/* Cheaply and approximately convert from nanoseconds to microseconds.
-	 * The result and subsequent calculations are also defined in the same
-	 * approximate microseconds units. The principal source of timing
-	 * error here is from the simple truncation.
-	 *
-	 * Note that local_clock() is only defined wrt to the current CPU;
-	 * the comparisons are no longer valid if we switch CPUs. Instead of
-	 * blocking preemption for the entire busywait, we can detect the CPU
-	 * switch and use that as indicator of system load and a reason to
-	 * stop busywaiting, see busywait_stop().
-	 */
-	*cpu = get_cpu();
-	t = local_clock() >> 10;
-	put_cpu();
-
-	return t;
-}
-
-static bool busywait_stop(unsigned long timeout, unsigned cpu)
-{
-	unsigned this_cpu;
-
-	if (time_after(local_clock_us(&this_cpu), timeout))
-		return true;
-
-	return this_cpu != cpu;
-}
-
-bool __i915_spin_request(const struct drm_i915_gem_request *req,
-			 int state, unsigned long timeout_us)
-{
-	unsigned cpu;
-
-	/* When waiting for high frequency requests, e.g. during synchronous
-	 * rendering split between the CPU and GPU, the finite amount of time
-	 * required to set up the irq and wait upon it limits the response
-	 * rate. By busywaiting on the request completion for a short while we
-	 * can service the high frequency waits as quick as possible. However,
-	 * if it is a slow request, we want to sleep as quickly as possible.
-	 * The tradeoff between waiting and sleeping is roughly the time it
-	 * takes to sleep on a request, on the order of a microsecond.
-	 */
-
-	timeout_us += local_clock_us(&cpu);
-	do {
-		if (i915_gem_request_completed(req))
-			return true;
-
-		if (signal_pending_state(state, current))
-			break;
-
-		if (busywait_stop(timeout_us, cpu))
-			break;
-
-		cpu_relax_lowlatency();
-	} while (!need_resched());
-
-	return false;
-}
-
-/**
- * __i915_wait_request - wait until execution of request has finished
- * @req: duh!
- * @interruptible: do an interruptible wait (normally yes)
- * @timeout: in - how long to wait (NULL forever); out - how much time remaining
- * @rps: RPS client
- *
- * Note: It is of utmost importance that the passed in seqno and reset_counter
- * values have been read by the caller in an smp safe manner. Where read-side
- * locks are involved, it is sufficient to read the reset_counter before
- * unlocking the lock that protects the seqno. For lockless tricks, the
- * reset_counter _must_ be read before, and an appropriate smp_rmb must be
- * inserted.
- *
- * Returns 0 if the request was found within the alloted time. Else returns the
- * errno with remaining time filled in timeout argument.
- */
-int __i915_wait_request(struct drm_i915_gem_request *req,
-			bool interruptible,
-			s64 *timeout,
-			struct intel_rps_client *rps)
-{
-	int state = interruptible ? TASK_INTERRUPTIBLE : TASK_UNINTERRUPTIBLE;
-	DEFINE_WAIT(reset);
-	struct intel_wait wait;
-	unsigned long timeout_remain;
-	s64 before = 0; /* Only to silence a compiler warning. */
-	int ret = 0;
-
-	might_sleep();
-
-	if (list_empty(&req->list))
-		return 0;
-
-	if (i915_gem_request_completed(req))
-		return 0;
-
-	timeout_remain = MAX_SCHEDULE_TIMEOUT;
-	if (timeout) {
-		if (WARN_ON(*timeout < 0))
-			return -EINVAL;
-
-		if (*timeout == 0)
-			return -ETIME;
-
-		timeout_remain = nsecs_to_jiffies_timeout(*timeout);
-
-		/*
-		 * Record current time in case interrupted by signal, or wedged.
-		 */
-		before = ktime_get_raw_ns();
-	}
-
-	trace_i915_gem_request_wait_begin(req);
-
-	/* This client is about to stall waiting for the GPU. In many cases
-	 * this is undesirable and limits the throughput of the system, as
-	 * many clients cannot continue processing user input/output whilst
-	 * blocked. RPS autotuning may take tens of milliseconds to respond
-	 * to the GPU load and thus incurs additional latency for the client.
-	 * We can circumvent that by promoting the GPU frequency to maximum
-	 * before we wait. This makes the GPU throttle up much more quickly
-	 * (good for benchmarks and user experience, e.g. window animations),
-	 * but at a cost of spending more power processing the workload
-	 * (bad for battery). Not all clients even want their results
-	 * immediately and for them we should just let the GPU select its own
-	 * frequency to maximise efficiency. To prevent a single client from
-	 * forcing the clocks too high for the whole system, we only allow
-	 * each client to waitboost once in a busy period.
-	 */
-	if (INTEL_INFO(req->i915)->gen >= 6)
-		gen6_rps_boost(req->i915, rps, req->emitted_jiffies);
-
-	/* Optimistic spin for the next ~jiffie before touching IRQs */
-	if (i915_spin_request(req, state, 5))
-		goto complete;
-
-	set_current_state(state);
-	add_wait_queue(&req->i915->gpu_error.wait_queue, &reset);
-
-	intel_wait_init(&wait, req->seqno);
-	if (intel_engine_add_wait(req->engine, &wait))
-		/* In order to check that we haven't missed the interrupt
-		 * as we enabled it, we need to kick ourselves to do a
-		 * coherent check on the seqno before we sleep.
-		 */
-		goto wakeup;
-
-	for (;;) {
-		if (signal_pending_state(state, current)) {
-			ret = -ERESTARTSYS;
-			break;
-		}
-
-		timeout_remain = io_schedule_timeout(timeout_remain);
-		if (timeout_remain == 0) {
-			ret = -ETIME;
-			break;
-		}
-
-		if (intel_wait_complete(&wait))
-			break;
-
-		set_current_state(state);
-
-wakeup:
-		/* Carefully check if the request is complete, giving time
-		 * for the seqno to be visible following the interrupt.
-		 * We also have to check in case we are kicked by the GPU
-		 * reset in order to drop the struct_mutex.
-		 */
-		if (__i915_request_irq_complete(req))
-			break;
-
-		/* Only spin if we know the GPU is processing this request */
-		if (i915_spin_request(req, state, 2))
-			break;
-	}
-	remove_wait_queue(&req->i915->gpu_error.wait_queue, &reset);
-
-	intel_engine_remove_wait(req->engine, &wait);
-	__set_current_state(TASK_RUNNING);
-complete:
-	trace_i915_gem_request_wait_end(req);
-
-	if (timeout) {
-		s64 tres = *timeout - (ktime_get_raw_ns() - before);
-
-		*timeout = tres < 0 ? 0 : tres;
-
-		/*
-		 * Apparently ktime isn't accurate enough and occasionally has a
-		 * bit of mismatch in the jiffies<->nsecs<->ktime loop. So patch
-		 * things up to make the test happy. We allow up to 1 jiffy.
-		 *
-		 * This is a regrssion from the timespec->ktime conversion.
-		 */
-		if (ret == -ETIME && *timeout < jiffies_to_usecs(1)*1000)
-			*timeout = 0;
-	}
-
-	if (rps && req->seqno == req->engine->last_submitted_seqno) {
-		/* The GPU is now idle and this client has stalled.
-		 * Since no other client has submitted a request in the
-		 * meantime, assume that this client is the only one
-		 * supplying work to the GPU but is unable to keep that
-		 * work supplied because it is waiting. Since the GPU is
-		 * then never kept fully busy, RPS autoclocking will
-		 * keep the clocks relatively low, causing further delays.
-		 * Compensate by giving the synchronous client credit for
-		 * a waitboost next time.
-		 */
-		spin_lock(&req->i915->rps.client_lock);
-		list_del_init(&rps->link);
-		spin_unlock(&req->i915->rps.client_lock);
-	}
-
-	return ret;
-}
-
-int i915_gem_request_add_to_client(struct drm_i915_gem_request *req,
-				   struct drm_file *file)
-{
-	struct drm_i915_file_private *file_priv;
-
-	WARN_ON(!req || !file || req->file_priv);
-
-	if (!req || !file)
-		return -EINVAL;
-
-	if (req->file_priv)
-		return -EINVAL;
-
-	file_priv = file->driver_priv;
-
-	spin_lock(&file_priv->mm.lock);
-	req->file_priv = file_priv;
-	list_add_tail(&req->client_list, &file_priv->mm.request_list);
-	spin_unlock(&file_priv->mm.lock);
-
-	req->pid = get_pid(task_pid(current));
-
-	return 0;
-}
-
-static inline void
-i915_gem_request_remove_from_client(struct drm_i915_gem_request *request)
-{
-	struct drm_i915_file_private *file_priv = request->file_priv;
-
-	if (!file_priv)
-		return;
-
-	spin_lock(&file_priv->mm.lock);
-	list_del(&request->client_list);
-	request->file_priv = NULL;
-	spin_unlock(&file_priv->mm.lock);
-
-	put_pid(request->pid);
-	request->pid = NULL;
-}
-
-static void i915_gem_request_retire(struct drm_i915_gem_request *request)
-{
-	trace_i915_gem_request_retire(request);
-
-	/* We know the GPU must have read the request to have
-	 * sent us the seqno + interrupt, so use the position
-	 * of tail of the request to update the last known position
-	 * of the GPU head.
-	 *
-	 * Note this requires that we are always called in request
-	 * completion order.
-	 */
-	request->ringbuf->last_retired_head = request->postfix;
-
-	list_del_init(&request->list);
-	i915_gem_request_remove_from_client(request);
-
-	if (request->previous_context) {
-		if (i915.enable_execlists)
-			intel_lr_context_unpin(request->previous_context,
-					       request->engine);
-	}
-
-	i915_gem_context_unreference(request->ctx);
-	i915_gem_request_unreference(request);
-}
-
-static void
-__i915_gem_request_retire__upto(struct drm_i915_gem_request *req)
-{
-	struct intel_engine_cs *engine = req->engine;
-	struct drm_i915_gem_request *tmp;
-
-	lockdep_assert_held(&engine->i915->drm.struct_mutex);
-
-	if (list_empty(&req->list))
-		return;
-
-	do {
-		tmp = list_first_entry(&engine->request_list,
-				       typeof(*tmp), list);
-
-		i915_gem_request_retire(tmp);
-	} while (tmp != req);
-
-	WARN_ON(i915_verify_lists(engine->dev));
-}
-
-/**
- * Waits for a request to be signaled, and cleans up the
- * request and object lists appropriately for that event.
- * @req: request to wait on
- */
-int
-i915_wait_request(struct drm_i915_gem_request *req)
-{
-	struct drm_i915_private *dev_priv = req->i915;
-	bool interruptible;
-	int ret;
-
-	interruptible = dev_priv->mm.interruptible;
-
-	BUG_ON(!mutex_is_locked(&dev_priv->drm.struct_mutex));
-
-	ret = __i915_wait_request(req, interruptible, NULL, NULL);
-	if (ret)
-		return ret;
-
-	/* If the GPU hung, we want to keep the requests to find the guilty. */
-	if (!i915_reset_in_progress(&dev_priv->gpu_error))
-		__i915_gem_request_retire__upto(req);
-
-	return 0;
-}
-
 /**
  * Ensures that all rendering to the object has completed and the object is
  * safe to unbind from the GTT or access from the CPU.
@@ -1740,7 +1381,7 @@
 		i915_gem_object_retire__write(obj);
 
 	if (!i915_reset_in_progress(&req->i915->gpu_error))
-		__i915_gem_request_retire__upto(req);
+		i915_gem_request_retire_upto(req);
 }
 
 /* A nonblocking variant of the above wait. This is a highly dangerous routine
@@ -2761,193 +2402,6 @@
 	drm_gem_object_unreference(&obj->base);
 }
 
-static int
-i915_gem_init_seqno(struct drm_i915_private *dev_priv, u32 seqno)
-{
-	struct intel_engine_cs *engine;
-	int ret;
-
-	/* Carefully retire all requests without writing to the rings */
-	for_each_engine(engine, dev_priv) {
-		ret = intel_engine_idle(engine);
-		if (ret)
-			return ret;
-	}
-	i915_gem_retire_requests(dev_priv);
-
-	/* If the seqno wraps around, we need to clear the breadcrumb rbtree */
-	if (!i915_seqno_passed(seqno, dev_priv->next_seqno)) {
-		while (intel_kick_waiters(dev_priv) ||
-		       intel_kick_signalers(dev_priv))
-			yield();
-	}
-
-	/* Finally reset hw state */
-	for_each_engine(engine, dev_priv)
-		intel_ring_init_seqno(engine, seqno);
-
-	return 0;
-}
-
-int i915_gem_set_seqno(struct drm_device *dev, u32 seqno)
-{
-	struct drm_i915_private *dev_priv = to_i915(dev);
-	int ret;
-
-	if (seqno == 0)
-		return -EINVAL;
-
-	/* HWS page needs to be set less than what we
-	 * will inject to ring
-	 */
-	ret = i915_gem_init_seqno(dev_priv, seqno - 1);
-	if (ret)
-		return ret;
-
-	/* Carefully set the last_seqno value so that wrap
-	 * detection still works
-	 */
-	dev_priv->next_seqno = seqno;
-	dev_priv->last_seqno = seqno - 1;
-	if (dev_priv->last_seqno == 0)
-		dev_priv->last_seqno--;
-
-	return 0;
-}
-
-int
-i915_gem_get_seqno(struct drm_i915_private *dev_priv, u32 *seqno)
-{
-	/* reserve 0 for non-seqno */
-	if (dev_priv->next_seqno == 0) {
-		int ret = i915_gem_init_seqno(dev_priv, 0);
-		if (ret)
-			return ret;
-
-		dev_priv->next_seqno = 1;
-	}
-
-	*seqno = dev_priv->last_seqno = dev_priv->next_seqno++;
-	return 0;
-}
-
-static void i915_gem_mark_busy(const struct intel_engine_cs *engine)
-{
-	struct drm_i915_private *dev_priv = engine->i915;
-
-	dev_priv->gt.active_engines |= intel_engine_flag(engine);
-	if (dev_priv->gt.awake)
-		return;
-
-	intel_runtime_pm_get_noresume(dev_priv);
-	dev_priv->gt.awake = true;
-
-	intel_enable_gt_powersave(dev_priv);
-	i915_update_gfx_val(dev_priv);
-	if (INTEL_GEN(dev_priv) >= 6)
-		gen6_rps_busy(dev_priv);
-
-	queue_delayed_work(dev_priv->wq,
-			   &dev_priv->gt.retire_work,
-			   round_jiffies_up_relative(HZ));
-}
-
-/*
- * NB: This function is not allowed to fail. Doing so would mean the the
- * request is not being tracked for completion but the work itself is
- * going to happen on the hardware. This would be a Bad Thing(tm).
- */
-void __i915_add_request(struct drm_i915_gem_request *request,
-			struct drm_i915_gem_object *obj,
-			bool flush_caches)
-{
-	struct intel_engine_cs *engine;
-	struct intel_ringbuffer *ringbuf;
-	u32 request_start;
-	u32 reserved_tail;
-	int ret;
-
-	if (WARN_ON(request == NULL))
-		return;
-
-	engine = request->engine;
-	ringbuf = request->ringbuf;
-
-	/*
-	 * To ensure that this call will not fail, space for its emissions
-	 * should already have been reserved in the ring buffer. Let the ring
-	 * know that it is time to use that space up.
-	 */
-	request_start = intel_ring_get_tail(ringbuf);
-	reserved_tail = request->reserved_space;
-	request->reserved_space = 0;
-
-	/*
-	 * Emit any outstanding flushes - execbuf can fail to emit the flush
-	 * after having emitted the batchbuffer command. Hence we need to fix
-	 * things up similar to emitting the lazy request. The difference here
-	 * is that the flush _must_ happen before the next request, no matter
-	 * what.
-	 */
-	if (flush_caches) {
-		if (i915.enable_execlists)
-			ret = logical_ring_flush_all_caches(request);
-		else
-			ret = intel_ring_flush_all_caches(request);
-		/* Not allowed to fail! */
-		WARN(ret, "*_ring_flush_all_caches failed: %d!\n", ret);
-	}
-
-	trace_i915_gem_request_add(request);
-
-	request->head = request_start;
-
-	/* Whilst this request exists, batch_obj will be on the
-	 * active_list, and so will hold the active reference. Only when this
-	 * request is retired will the the batch_obj be moved onto the
-	 * inactive_list and lose its active reference. Hence we do not need
-	 * to explicitly hold another reference here.
-	 */
-	request->batch_obj = obj;
-
-	/* Seal the request and mark it as pending execution. Note that
-	 * we may inspect this state, without holding any locks, during
-	 * hangcheck. Hence we apply the barrier to ensure that we do not
-	 * see a more recent value in the hws than we are tracking.
-	 */
-	request->emitted_jiffies = jiffies;
-	request->previous_seqno = engine->last_submitted_seqno;
-	smp_store_mb(engine->last_submitted_seqno, request->seqno);
-	list_add_tail(&request->list, &engine->request_list);
-
-	/* Record the position of the start of the request so that
-	 * should we detect the updated seqno part-way through the
-	 * GPU processing the request, we never over-estimate the
-	 * position of the head.
-	 */
-	request->postfix = intel_ring_get_tail(ringbuf);
-
-	if (i915.enable_execlists)
-		ret = engine->emit_request(request);
-	else {
-		ret = engine->add_request(request);
-
-		request->tail = intel_ring_get_tail(ringbuf);
-	}
-	/* Not allowed to fail! */
-	WARN(ret, "emit|add_request failed: %d!\n", ret);
-	/* Sanity check that the reserved size was large enough. */
-	ret = intel_ring_get_tail(ringbuf) - request_start;
-	if (ret < 0)
-		ret += ringbuf->size;
-	WARN_ONCE(ret > reserved_tail,
-		  "Not enough space reserved (%d bytes) "
-		  "for adding the request (%d bytes)\n",
-		  reserved_tail, ret);
-
-	i915_gem_mark_busy(engine);
-}
-
 static bool i915_context_is_banned(const struct i915_gem_context *ctx)
 {
 	unsigned long elapsed;
@@ -2979,101 +2433,6 @@
 	}
 }
 
-void i915_gem_request_free(struct kref *req_ref)
-{
-	struct drm_i915_gem_request *req = container_of(req_ref,
-						 typeof(*req), ref);
-	kmem_cache_free(req->i915->requests, req);
-}
-
-static inline int
-__i915_gem_request_alloc(struct intel_engine_cs *engine,
-			 struct i915_gem_context *ctx,
-			 struct drm_i915_gem_request **req_out)
-{
-	struct drm_i915_private *dev_priv = engine->i915;
-	unsigned reset_counter = i915_reset_counter(&dev_priv->gpu_error);
-	struct drm_i915_gem_request *req;
-	int ret;
-
-	if (!req_out)
-		return -EINVAL;
-
-	*req_out = NULL;
-
-	/* ABI: Before userspace accesses the GPU (e.g. execbuffer), report
-	 * EIO if the GPU is already wedged, or EAGAIN to drop the struct_mutex
-	 * and restart.
-	 */
-	ret = i915_gem_check_wedge(reset_counter, dev_priv->mm.interruptible);
-	if (ret)
-		return ret;
-
-	req = kmem_cache_zalloc(dev_priv->requests, GFP_KERNEL);
-	if (req == NULL)
-		return -ENOMEM;
-
-	ret = i915_gem_get_seqno(engine->i915, &req->seqno);
-	if (ret)
-		goto err;
-
-	kref_init(&req->ref);
-	req->i915 = dev_priv;
-	req->engine = engine;
-	req->ctx  = ctx;
-	i915_gem_context_reference(req->ctx);
-
-	/*
-	 * Reserve space in the ring buffer for all the commands required to
-	 * eventually emit this request. This is to guarantee that the
-	 * i915_add_request() call can't fail. Note that the reserve may need
-	 * to be redone if the request is not actually submitted straight
-	 * away, e.g. because a GPU scheduler has deferred it.
-	 */
-	req->reserved_space = MIN_SPACE_FOR_ADD_REQUEST;
-
-	if (i915.enable_execlists)
-		ret = intel_logical_ring_alloc_request_extras(req);
-	else
-		ret = intel_ring_alloc_request_extras(req);
-	if (ret)
-		goto err_ctx;
-
-	*req_out = req;
-	return 0;
-
-err_ctx:
-	i915_gem_context_unreference(ctx);
-err:
-	kmem_cache_free(dev_priv->requests, req);
-	return ret;
-}
-
-/**
- * i915_gem_request_alloc - allocate a request structure
- *
- * @engine: engine that we wish to issue the request on.
- * @ctx: context that the request will be associated with.
- *       This can be NULL if the request is not directly related to
- *       any specific user context, in which case this function will
- *       choose an appropriate context to use.
- *
- * Returns a pointer to the allocated request if successful,
- * or an error code if not.
- */
-struct drm_i915_gem_request *
-i915_gem_request_alloc(struct intel_engine_cs *engine,
-		       struct i915_gem_context *ctx)
-{
-	struct drm_i915_gem_request *req;
-	int err;
-
-	if (ctx == NULL)
-		ctx = engine->i915->kernel_context;
-	err = __i915_gem_request_alloc(engine, ctx, &req);
-	return err ? ERR_PTR(err) : req;
-}
-
 struct drm_i915_gem_request *
 i915_gem_find_active_request(struct intel_engine_cs *engine)
 {
@@ -3147,14 +2506,14 @@
 	 * implicit references on things like e.g. ppgtt address spaces through
 	 * the request.
 	 */
-	while (!list_empty(&engine->request_list)) {
+	if (!list_empty(&engine->request_list)) {
 		struct drm_i915_gem_request *request;
 
-		request = list_first_entry(&engine->request_list,
-					   struct drm_i915_gem_request,
-					   list);
+		request = list_last_entry(&engine->request_list,
+					  struct drm_i915_gem_request,
+					  list);
 
-		i915_gem_request_retire(request);
+		i915_gem_request_retire_upto(request);
 	}
 
 	/* Having flushed all requests from all queues, we know that all
@@ -3222,7 +2581,7 @@
 		if (!i915_gem_request_completed(request))
 			break;
 
-		i915_gem_request_retire(request);
+		i915_gem_request_retire_upto(request);
 	}
 
 	/* Move any buffers on the active list that are no longer referenced
diff --git a/drivers/gpu/drm/i915/i915_gem_request.c b/drivers/gpu/drm/i915/i915_gem_request.c
new file mode 100644
index 0000000..9e9aa6b
--- /dev/null
+++ b/drivers/gpu/drm/i915/i915_gem_request.c
@@ -0,0 +1,658 @@
+/*
+ * Copyright © 2008-2015 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ *
+ */
+
+#include "i915_drv.h"
+
+int i915_gem_request_add_to_client(struct drm_i915_gem_request *req,
+				   struct drm_file *file)
+{
+	struct drm_i915_private *dev_private;
+	struct drm_i915_file_private *file_priv;
+
+	WARN_ON(!req || !file || req->file_priv);
+
+	if (!req || !file)
+		return -EINVAL;
+
+	if (req->file_priv)
+		return -EINVAL;
+
+	dev_private = req->i915;
+	file_priv = file->driver_priv;
+
+	spin_lock(&file_priv->mm.lock);
+	req->file_priv = file_priv;
+	list_add_tail(&req->client_list, &file_priv->mm.request_list);
+	spin_unlock(&file_priv->mm.lock);
+
+	req->pid = get_pid(task_pid(current));
+
+	return 0;
+}
+
+static inline void
+i915_gem_request_remove_from_client(struct drm_i915_gem_request *request)
+{
+	struct drm_i915_file_private *file_priv = request->file_priv;
+
+	if (!file_priv)
+		return;
+
+	spin_lock(&file_priv->mm.lock);
+	list_del(&request->client_list);
+	request->file_priv = NULL;
+	spin_unlock(&file_priv->mm.lock);
+
+	put_pid(request->pid);
+	request->pid = NULL;
+}
+
+static void i915_gem_request_retire(struct drm_i915_gem_request *request)
+{
+	trace_i915_gem_request_retire(request);
+	list_del_init(&request->list);
+
+	/* We know the GPU must have read the request to have
+	 * sent us the seqno + interrupt, so use the position
+	 * of tail of the request to update the last known position
+	 * of the GPU head.
+	 *
+	 * Note this requires that we are always called in request
+	 * completion order.
+	 */
+	request->ringbuf->last_retired_head = request->postfix;
+
+	i915_gem_request_remove_from_client(request);
+
+	if (request->previous_context) {
+		if (i915.enable_execlists)
+			intel_lr_context_unpin(request->previous_context,
+					       request->engine);
+	}
+
+	i915_gem_context_unreference(request->ctx);
+	i915_gem_request_unreference(request);
+}
+
+void i915_gem_request_retire_upto(struct drm_i915_gem_request *req)
+{
+	struct intel_engine_cs *engine = req->engine;
+	struct drm_i915_gem_request *tmp;
+
+	lockdep_assert_held(&req->i915->drm.struct_mutex);
+
+	if (list_empty(&req->list))
+		return;
+
+	do {
+		tmp = list_first_entry(&engine->request_list,
+				       typeof(*tmp), list);
+
+		i915_gem_request_retire(tmp);
+	} while (tmp != req);
+
+	WARN_ON(i915_verify_lists(engine->dev));
+}
+
+static int i915_gem_check_wedge(unsigned int reset_counter, bool interruptible)
+{
+	if (__i915_terminally_wedged(reset_counter))
+		return -EIO;
+
+	if (__i915_reset_in_progress(reset_counter)) {
+		/* Non-interruptible callers can't handle -EAGAIN, hence return
+		 * -EIO unconditionally for these.
+		 */
+		if (!interruptible)
+			return -EIO;
+
+		return -EAGAIN;
+	}
+
+	return 0;
+}
+
+static int i915_gem_init_seqno(struct drm_i915_private *dev_priv, u32 seqno)
+{
+	struct intel_engine_cs *engine;
+	int ret;
+
+	/* Carefully retire all requests without writing to the rings */
+	for_each_engine(engine, dev_priv) {
+		ret = intel_engine_idle(engine);
+		if (ret)
+			return ret;
+	}
+	i915_gem_retire_requests(dev_priv);
+
+	/* If the seqno wraps around, we need to clear the breadcrumb rbtree */
+	if (!i915_seqno_passed(seqno, dev_priv->next_seqno)) {
+		while (intel_kick_waiters(dev_priv) ||
+		       intel_kick_signalers(dev_priv))
+			yield();
+	}
+
+	/* Finally reset hw state */
+	for_each_engine(engine, dev_priv)
+		intel_ring_init_seqno(engine, seqno);
+
+	return 0;
+}
+
+int i915_gem_set_seqno(struct drm_device *dev, u32 seqno)
+{
+	struct drm_i915_private *dev_priv = to_i915(dev);
+	int ret;
+
+	if (seqno == 0)
+		return -EINVAL;
+
+	/* HWS page needs to be set less than what we
+	 * will inject to ring
+	 */
+	ret = i915_gem_init_seqno(dev_priv, seqno - 1);
+	if (ret)
+		return ret;
+
+	/* Carefully set the last_seqno value so that wrap
+	 * detection still works
+	 */
+	dev_priv->next_seqno = seqno;
+	dev_priv->last_seqno = seqno - 1;
+	if (dev_priv->last_seqno == 0)
+		dev_priv->last_seqno--;
+
+	return 0;
+}
+
+static int i915_gem_get_seqno(struct drm_i915_private *dev_priv, u32 *seqno)
+{
+	/* reserve 0 for non-seqno */
+	if (unlikely(dev_priv->next_seqno == 0)) {
+		int ret;
+
+		ret = i915_gem_init_seqno(dev_priv, 0);
+		if (ret)
+			return ret;
+
+		dev_priv->next_seqno = 1;
+	}
+
+	*seqno = dev_priv->last_seqno = dev_priv->next_seqno++;
+	return 0;
+}
+
+static inline int
+__i915_gem_request_alloc(struct intel_engine_cs *engine,
+			 struct i915_gem_context *ctx,
+			 struct drm_i915_gem_request **req_out)
+{
+	struct drm_i915_private *dev_priv = engine->i915;
+	unsigned int reset_counter = i915_reset_counter(&dev_priv->gpu_error);
+	struct drm_i915_gem_request *req;
+	int ret;
+
+	if (!req_out)
+		return -EINVAL;
+
+	*req_out = NULL;
+
+	/* ABI: Before userspace accesses the GPU (e.g. execbuffer), report
+	 * EIO if the GPU is already wedged, or EAGAIN to drop the struct_mutex
+	 * and restart.
+	 */
+	ret = i915_gem_check_wedge(reset_counter, dev_priv->mm.interruptible);
+	if (ret)
+		return ret;
+
+	req = kmem_cache_zalloc(dev_priv->requests, GFP_KERNEL);
+	if (!req)
+		return -ENOMEM;
+
+	ret = i915_gem_get_seqno(dev_priv, &req->seqno);
+	if (ret)
+		goto err;
+
+	kref_init(&req->ref);
+	req->i915 = dev_priv;
+	req->engine = engine;
+	req->ctx = ctx;
+	i915_gem_context_reference(ctx);
+
+	/*
+	 * Reserve space in the ring buffer for all the commands required to
+	 * eventually emit this request. This is to guarantee that the
+	 * i915_add_request() call can't fail. Note that the reserve may need
+	 * to be redone if the request is not actually submitted straight
+	 * away, e.g. because a GPU scheduler has deferred it.
+	 */
+	req->reserved_space = MIN_SPACE_FOR_ADD_REQUEST;
+
+	if (i915.enable_execlists)
+		ret = intel_logical_ring_alloc_request_extras(req);
+	else
+		ret = intel_ring_alloc_request_extras(req);
+	if (ret)
+		goto err_ctx;
+
+	*req_out = req;
+	return 0;
+
+err_ctx:
+	i915_gem_context_unreference(ctx);
+err:
+	kmem_cache_free(dev_priv->requests, req);
+	return ret;
+}
+
+/**
+ * i915_gem_request_alloc - allocate a request structure
+ *
+ * @engine: engine that we wish to issue the request on.
+ * @ctx: context that the request will be associated with.
+ *       This can be NULL if the request is not directly related to
+ *       any specific user context, in which case this function will
+ *       choose an appropriate context to use.
+ *
+ * Returns a pointer to the allocated request if successful,
+ * or an error code if not.
+ */
+struct drm_i915_gem_request *
+i915_gem_request_alloc(struct intel_engine_cs *engine,
+		       struct i915_gem_context *ctx)
+{
+	struct drm_i915_gem_request *req;
+	int err;
+
+	if (!ctx)
+		ctx = engine->i915->kernel_context;
+	err = __i915_gem_request_alloc(engine, ctx, &req);
+	return err ? ERR_PTR(err) : req;
+}
+
+static void i915_gem_mark_busy(const struct intel_engine_cs *engine)
+{
+	struct drm_i915_private *dev_priv = engine->i915;
+
+	dev_priv->gt.active_engines |= intel_engine_flag(engine);
+	if (dev_priv->gt.awake)
+		return;
+
+	intel_runtime_pm_get_noresume(dev_priv);
+	dev_priv->gt.awake = true;
+
+	intel_enable_gt_powersave(dev_priv);
+	i915_update_gfx_val(dev_priv);
+	if (INTEL_GEN(dev_priv) >= 6)
+		gen6_rps_busy(dev_priv);
+
+	queue_delayed_work(dev_priv->wq,
+			   &dev_priv->gt.retire_work,
+			   round_jiffies_up_relative(HZ));
+}
+
+/*
+ * NB: This function is not allowed to fail. Doing so would mean the the
+ * request is not being tracked for completion but the work itself is
+ * going to happen on the hardware. This would be a Bad Thing(tm).
+ */
+void __i915_add_request(struct drm_i915_gem_request *request,
+			struct drm_i915_gem_object *obj,
+			bool flush_caches)
+{
+	struct intel_engine_cs *engine;
+	struct intel_ringbuffer *ringbuf;
+	u32 request_start;
+	u32 reserved_tail;
+	int ret;
+
+	if (WARN_ON(!request))
+		return;
+
+	engine = request->engine;
+	ringbuf = request->ringbuf;
+
+	/*
+	 * To ensure that this call will not fail, space for its emissions
+	 * should already have been reserved in the ring buffer. Let the ring
+	 * know that it is time to use that space up.
+	 */
+	request_start = intel_ring_get_tail(ringbuf);
+	reserved_tail = request->reserved_space;
+	request->reserved_space = 0;
+
+	/*
+	 * Emit any outstanding flushes - execbuf can fail to emit the flush
+	 * after having emitted the batchbuffer command. Hence we need to fix
+	 * things up similar to emitting the lazy request. The difference here
+	 * is that the flush _must_ happen before the next request, no matter
+	 * what.
+	 */
+	if (flush_caches) {
+		if (i915.enable_execlists)
+			ret = logical_ring_flush_all_caches(request);
+		else
+			ret = intel_ring_flush_all_caches(request);
+		/* Not allowed to fail! */
+		WARN(ret, "*_ring_flush_all_caches failed: %d!\n", ret);
+	}
+
+	trace_i915_gem_request_add(request);
+
+	request->head = request_start;
+
+	/* Whilst this request exists, batch_obj will be on the
+	 * active_list, and so will hold the active reference. Only when this
+	 * request is retired will the the batch_obj be moved onto the
+	 * inactive_list and lose its active reference. Hence we do not need
+	 * to explicitly hold another reference here.
+	 */
+	request->batch_obj = obj;
+
+	/* Seal the request and mark it as pending execution. Note that
+	 * we may inspect this state, without holding any locks, during
+	 * hangcheck. Hence we apply the barrier to ensure that we do not
+	 * see a more recent value in the hws than we are tracking.
+	 */
+	request->emitted_jiffies = jiffies;
+	request->previous_seqno = engine->last_submitted_seqno;
+	smp_store_mb(engine->last_submitted_seqno, request->seqno);
+	list_add_tail(&request->list, &engine->request_list);
+
+	/* Record the position of the start of the request so that
+	 * should we detect the updated seqno part-way through the
+	 * GPU processing the request, we never over-estimate the
+	 * position of the head.
+	 */
+	request->postfix = intel_ring_get_tail(ringbuf);
+
+	if (i915.enable_execlists) {
+		ret = engine->emit_request(request);
+	} else {
+		ret = engine->add_request(request);
+
+		request->tail = intel_ring_get_tail(ringbuf);
+	}
+	/* Not allowed to fail! */
+	WARN(ret, "emit|add_request failed: %d!\n", ret);
+	/* Sanity check that the reserved size was large enough. */
+	ret = intel_ring_get_tail(ringbuf) - request_start;
+	if (ret < 0)
+		ret += ringbuf->size;
+	WARN_ONCE(ret > reserved_tail,
+		  "Not enough space reserved (%d bytes) "
+		  "for adding the request (%d bytes)\n",
+		  reserved_tail, ret);
+
+	i915_gem_mark_busy(engine);
+}
+
+static unsigned long local_clock_us(unsigned int *cpu)
+{
+	unsigned long t;
+
+	/* Cheaply and approximately convert from nanoseconds to microseconds.
+	 * The result and subsequent calculations are also defined in the same
+	 * approximate microseconds units. The principal source of timing
+	 * error here is from the simple truncation.
+	 *
+	 * Note that local_clock() is only defined wrt to the current CPU;
+	 * the comparisons are no longer valid if we switch CPUs. Instead of
+	 * blocking preemption for the entire busywait, we can detect the CPU
+	 * switch and use that as indicator of system load and a reason to
+	 * stop busywaiting, see busywait_stop().
+	 */
+	*cpu = get_cpu();
+	t = local_clock() >> 10;
+	put_cpu();
+
+	return t;
+}
+
+static bool busywait_stop(unsigned long timeout, unsigned int cpu)
+{
+	unsigned int this_cpu;
+
+	if (time_after(local_clock_us(&this_cpu), timeout))
+		return true;
+
+	return this_cpu != cpu;
+}
+
+bool __i915_spin_request(const struct drm_i915_gem_request *req,
+			 int state, unsigned long timeout_us)
+{
+	unsigned int cpu;
+
+	/* When waiting for high frequency requests, e.g. during synchronous
+	 * rendering split between the CPU and GPU, the finite amount of time
+	 * required to set up the irq and wait upon it limits the response
+	 * rate. By busywaiting on the request completion for a short while we
+	 * can service the high frequency waits as quick as possible. However,
+	 * if it is a slow request, we want to sleep as quickly as possible.
+	 * The tradeoff between waiting and sleeping is roughly the time it
+	 * takes to sleep on a request, on the order of a microsecond.
+	 */
+
+	timeout_us += local_clock_us(&cpu);
+	do {
+		if (i915_gem_request_completed(req))
+			return true;
+
+		if (signal_pending_state(state, current))
+			break;
+
+		if (busywait_stop(timeout_us, cpu))
+			break;
+
+		cpu_relax_lowlatency();
+	} while (!need_resched());
+
+	return false;
+}
+
+/**
+ * __i915_wait_request - wait until execution of request has finished
+ * @req: duh!
+ * @interruptible: do an interruptible wait (normally yes)
+ * @timeout: in - how long to wait (NULL forever); out - how much time remaining
+ * @rps: client to charge for RPS boosting
+ *
+ * Note: It is of utmost importance that the passed in seqno and reset_counter
+ * values have been read by the caller in an smp safe manner. Where read-side
+ * locks are involved, it is sufficient to read the reset_counter before
+ * unlocking the lock that protects the seqno. For lockless tricks, the
+ * reset_counter _must_ be read before, and an appropriate smp_rmb must be
+ * inserted.
+ *
+ * Returns 0 if the request was found within the alloted time. Else returns the
+ * errno with remaining time filled in timeout argument.
+ */
+int __i915_wait_request(struct drm_i915_gem_request *req,
+			bool interruptible,
+			s64 *timeout,
+			struct intel_rps_client *rps)
+{
+	int state = interruptible ? TASK_INTERRUPTIBLE : TASK_UNINTERRUPTIBLE;
+	DEFINE_WAIT(reset);
+	struct intel_wait wait;
+	unsigned long timeout_remain;
+	int ret = 0;
+
+	might_sleep();
+
+	if (list_empty(&req->list))
+		return 0;
+
+	if (i915_gem_request_completed(req))
+		return 0;
+
+	timeout_remain = MAX_SCHEDULE_TIMEOUT;
+	if (timeout) {
+		if (WARN_ON(*timeout < 0))
+			return -EINVAL;
+
+		if (*timeout == 0)
+			return -ETIME;
+
+		/* Record current time in case interrupted, or wedged */
+		timeout_remain = nsecs_to_jiffies_timeout(*timeout);
+		*timeout += ktime_get_raw_ns();
+	}
+
+	trace_i915_gem_request_wait_begin(req);
+
+	/* This client is about to stall waiting for the GPU. In many cases
+	 * this is undesirable and limits the throughput of the system, as
+	 * many clients cannot continue processing user input/output whilst
+	 * blocked. RPS autotuning may take tens of milliseconds to respond
+	 * to the GPU load and thus incurs additional latency for the client.
+	 * We can circumvent that by promoting the GPU frequency to maximum
+	 * before we wait. This makes the GPU throttle up much more quickly
+	 * (good for benchmarks and user experience, e.g. window animations),
+	 * but at a cost of spending more power processing the workload
+	 * (bad for battery). Not all clients even want their results
+	 * immediately and for them we should just let the GPU select its own
+	 * frequency to maximise efficiency. To prevent a single client from
+	 * forcing the clocks too high for the whole system, we only allow
+	 * each client to waitboost once in a busy period.
+	 */
+	if (INTEL_GEN(req->i915) >= 6)
+		gen6_rps_boost(req->i915, rps, req->emitted_jiffies);
+
+	/* Optimistic spin for the next ~jiffie before touching IRQs */
+	if (i915_spin_request(req, state, 5))
+		goto complete;
+
+	set_current_state(state);
+	add_wait_queue(&req->i915->gpu_error.wait_queue, &reset);
+
+	intel_wait_init(&wait, req->seqno);
+	if (intel_engine_add_wait(req->engine, &wait))
+		/* In order to check that we haven't missed the interrupt
+		 * as we enabled it, we need to kick ourselves to do a
+		 * coherent check on the seqno before we sleep.
+		 */
+		goto wakeup;
+
+	for (;;) {
+		if (signal_pending_state(state, current)) {
+			ret = -ERESTARTSYS;
+			break;
+		}
+
+		timeout_remain = io_schedule_timeout(timeout_remain);
+		if (timeout_remain == 0) {
+			ret = -ETIME;
+			break;
+		}
+
+		if (intel_wait_complete(&wait))
+			break;
+
+		set_current_state(state);
+
+wakeup:
+		/* Carefully check if the request is complete, giving time
+		 * for the seqno to be visible following the interrupt.
+		 * We also have to check in case we are kicked by the GPU
+		 * reset in order to drop the struct_mutex.
+		 */
+		if (__i915_request_irq_complete(req))
+			break;
+
+		/* Only spin if we know the GPU is processing this request */
+		if (i915_spin_request(req, state, 2))
+			break;
+	}
+	remove_wait_queue(&req->i915->gpu_error.wait_queue, &reset);
+
+	intel_engine_remove_wait(req->engine, &wait);
+	__set_current_state(TASK_RUNNING);
+complete:
+	trace_i915_gem_request_wait_end(req);
+
+	if (timeout) {
+		*timeout -= ktime_get_raw_ns();
+		if (*timeout < 0)
+			*timeout = 0;
+
+		/*
+		 * Apparently ktime isn't accurate enough and occasionally has a
+		 * bit of mismatch in the jiffies<->nsecs<->ktime loop. So patch
+		 * things up to make the test happy. We allow up to 1 jiffy.
+		 *
+		 * This is a regrssion from the timespec->ktime conversion.
+		 */
+		if (ret == -ETIME && *timeout < jiffies_to_usecs(1)*1000)
+			*timeout = 0;
+	}
+
+	if (rps && req->seqno == req->engine->last_submitted_seqno) {
+		/* The GPU is now idle and this client has stalled.
+		 * Since no other client has submitted a request in the
+		 * meantime, assume that this client is the only one
+		 * supplying work to the GPU but is unable to keep that
+		 * work supplied because it is waiting. Since the GPU is
+		 * then never kept fully busy, RPS autoclocking will
+		 * keep the clocks relatively low, causing further delays.
+		 * Compensate by giving the synchronous client credit for
+		 * a waitboost next time.
+		 */
+		spin_lock(&req->i915->rps.client_lock);
+		list_del_init(&rps->link);
+		spin_unlock(&req->i915->rps.client_lock);
+	}
+
+	return ret;
+}
+
+/**
+ * Waits for a request to be signaled, and cleans up the
+ * request and object lists appropriately for that event.
+ */
+int i915_wait_request(struct drm_i915_gem_request *req)
+{
+	int ret;
+
+	GEM_BUG_ON(!req);
+	lockdep_assert_held(&req->i915->drm.struct_mutex);
+
+	ret = __i915_wait_request(req, req->i915->mm.interruptible, NULL, NULL);
+	if (ret)
+		return ret;
+
+	/* If the GPU hung, we want to keep the requests to find the guilty. */
+	if (!i915_reset_in_progress(&req->i915->gpu_error))
+		i915_gem_request_retire_upto(req);
+
+	return 0;
+}
+
+void i915_gem_request_free(struct kref *req_ref)
+{
+	struct drm_i915_gem_request *req =
+		container_of(req_ref, typeof(*req), ref);
+	kmem_cache_free(req->i915->requests, req);
+}
diff --git a/drivers/gpu/drm/i915/i915_gem_request.h b/drivers/gpu/drm/i915/i915_gem_request.h
new file mode 100644
index 0000000..ea700be
--- /dev/null
+++ b/drivers/gpu/drm/i915/i915_gem_request.h
@@ -0,0 +1,238 @@
+/*
+ * Copyright © 2008-2015 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ *
+ */
+
+#ifndef I915_GEM_REQUEST_H
+#define I915_GEM_REQUEST_H
+
+/**
+ * Request queue structure.
+ *
+ * The request queue allows us to note sequence numbers that have been emitted
+ * and may be associated with active buffers to be retired.
+ *
+ * By keeping this list, we can avoid having to do questionable sequence
+ * number comparisons on buffer last_read|write_seqno. It also allows an
+ * emission time to be associated with the request for tracking how far ahead
+ * of the GPU the submission is.
+ *
+ * The requests are reference counted, so upon creation they should have an
+ * initial reference taken using kref_init
+ */
+struct drm_i915_gem_request {
+	struct kref ref;
+
+	/** On Which ring this request was generated */
+	struct drm_i915_private *i915;
+
+	/**
+	 * Context and ring buffer related to this request
+	 * Contexts are refcounted, so when this request is associated with a
+	 * context, we must increment the context's refcount, to guarantee that
+	 * it persists while any request is linked to it. Requests themselves
+	 * are also refcounted, so the request will only be freed when the last
+	 * reference to it is dismissed, and the code in
+	 * i915_gem_request_free() will then decrement the refcount on the
+	 * context.
+	 */
+	struct i915_gem_context *ctx;
+	struct intel_engine_cs *engine;
+	struct intel_ringbuffer *ringbuf;
+	struct intel_signal_node signaling;
+
+	/** GEM sequence number associated with the previous request,
+	 * when the HWS breadcrumb is equal to this the GPU is processing
+	 * this request.
+	 */
+	u32 previous_seqno;
+
+	/** GEM sequence number associated with this request,
+	 * when the HWS breadcrumb is equal or greater than this the GPU
+	 * has finished processing this request.
+	 */
+	u32 seqno;
+
+	/** Position in the ringbuffer of the start of the request */
+	u32 head;
+
+	/**
+	 * Position in the ringbuffer of the start of the postfix.
+	 * This is required to calculate the maximum available ringbuffer
+	 * space without overwriting the postfix.
+	 */
+	u32 postfix;
+
+	/** Position in the ringbuffer of the end of the whole request */
+	u32 tail;
+
+	/** Preallocate space in the ringbuffer for the emitting the request */
+	u32 reserved_space;
+
+	/**
+	 * Context related to the previous request.
+	 * As the contexts are accessed by the hardware until the switch is
+	 * completed to a new context, the hardware may still be writing
+	 * to the context object after the breadcrumb is visible. We must
+	 * not unpin/unbind/prune that object whilst still active and so
+	 * we keep the previous context pinned until the following (this)
+	 * request is retired.
+	 */
+	struct i915_gem_context *previous_context;
+
+	/** Batch buffer related to this request if any (used for
+	 * error state dump only).
+	 */
+	struct drm_i915_gem_object *batch_obj;
+
+	/** Time at which this request was emitted, in jiffies. */
+	unsigned long emitted_jiffies;
+
+	/** global list entry for this request */
+	struct list_head list;
+
+	struct drm_i915_file_private *file_priv;
+	/** file_priv list entry for this request */
+	struct list_head client_list;
+
+	/** process identifier submitting this request */
+	struct pid *pid;
+
+	/**
+	 * The ELSP only accepts two elements at a time, so we queue
+	 * context/tail pairs on a given queue (ring->execlist_queue) until the
+	 * hardware is available. The queue serves a double purpose: we also use
+	 * it to keep track of the up to 2 contexts currently in the hardware
+	 * (usually one in execution and the other queued up by the GPU): We
+	 * only remove elements from the head of the queue when the hardware
+	 * informs us that an element has been completed.
+	 *
+	 * All accesses to the queue are mediated by a spinlock
+	 * (ring->execlist_lock).
+	 */
+
+	/** Execlist link in the submission queue.*/
+	struct list_head execlist_link;
+
+	/** Execlists no. of times this request has been sent to the ELSP */
+	int elsp_submitted;
+
+	/** Execlists context hardware id. */
+	unsigned int ctx_hw_id;
+};
+
+struct drm_i915_gem_request * __must_check
+i915_gem_request_alloc(struct intel_engine_cs *engine,
+		       struct i915_gem_context *ctx);
+void i915_gem_request_free(struct kref *req_ref);
+int i915_gem_request_add_to_client(struct drm_i915_gem_request *req,
+				   struct drm_file *file);
+void i915_gem_request_retire_upto(struct drm_i915_gem_request *req);
+
+static inline u32
+i915_gem_request_get_seqno(struct drm_i915_gem_request *req)
+{
+	return req ? req->seqno : 0;
+}
+
+static inline struct intel_engine_cs *
+i915_gem_request_get_engine(struct drm_i915_gem_request *req)
+{
+	return req ? req->engine : NULL;
+}
+
+static inline struct drm_i915_gem_request *
+i915_gem_request_reference(struct drm_i915_gem_request *req)
+{
+	if (req)
+		kref_get(&req->ref);
+	return req;
+}
+
+static inline void
+i915_gem_request_unreference(struct drm_i915_gem_request *req)
+{
+	kref_put(&req->ref, i915_gem_request_free);
+}
+
+static inline void i915_gem_request_assign(struct drm_i915_gem_request **pdst,
+					   struct drm_i915_gem_request *src)
+{
+	if (src)
+		i915_gem_request_reference(src);
+
+	if (*pdst)
+		i915_gem_request_unreference(*pdst);
+
+	*pdst = src;
+}
+
+void __i915_add_request(struct drm_i915_gem_request *req,
+			struct drm_i915_gem_object *batch_obj,
+			bool flush_caches);
+#define i915_add_request(req) \
+	__i915_add_request(req, NULL, true)
+#define i915_add_request_no_flush(req) \
+	__i915_add_request(req, NULL, false)
+
+struct intel_rps_client;
+
+int __i915_wait_request(struct drm_i915_gem_request *req,
+			bool interruptible,
+			s64 *timeout,
+			struct intel_rps_client *rps);
+int __must_check i915_wait_request(struct drm_i915_gem_request *req);
+
+static inline u32 intel_engine_get_seqno(struct intel_engine_cs *engine);
+
+/**
+ * Returns true if seq1 is later than seq2.
+ */
+static inline bool i915_seqno_passed(u32 seq1, u32 seq2)
+{
+	return (s32)(seq1 - seq2) >= 0;
+}
+
+static inline bool
+i915_gem_request_started(const struct drm_i915_gem_request *req)
+{
+	return i915_seqno_passed(intel_engine_get_seqno(req->engine),
+				 req->previous_seqno);
+}
+
+static inline bool
+i915_gem_request_completed(const struct drm_i915_gem_request *req)
+{
+	return i915_seqno_passed(intel_engine_get_seqno(req->engine),
+				 req->seqno);
+}
+
+bool __i915_spin_request(const struct drm_i915_gem_request *request,
+			 int state, unsigned long timeout_us);
+static inline bool i915_spin_request(const struct drm_i915_gem_request *request,
+				     int state, unsigned long timeout_us)
+{
+	return (i915_gem_request_started(request) &&
+		__i915_spin_request(request, state, timeout_us));
+}
+
+#endif /* I915_GEM_REQUEST_H */