drivers/net/tg3.c: Use (pr|netdev)_<level> macro helpers
Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
Remove #define PFX
Use pr_<level>
Use netdev_<level>
Remove periods from most formats
Coalesce long formats
Use printk_once
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index ddf6615..f204f73 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -67,7 +67,6 @@
#include "tg3.h"
#define DRV_MODULE_NAME "tg3"
-#define PFX DRV_MODULE_NAME ": "
#define DRV_MODULE_VERSION "3.108"
#define DRV_MODULE_RELDATE "February 17, 2010"
@@ -158,7 +157,7 @@
#define FIRMWARE_TG3TSO5 "tigon/tg3_tso5.bin"
static char version[] __devinitdata =
- DRV_MODULE_NAME ".c:v" DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n";
+ DRV_MODULE_NAME ".c:v" DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")";
MODULE_AUTHOR("David S. Miller (davem@redhat.com) and Jeff Garzik (jgarzik@pobox.com)");
MODULE_DESCRIPTION("Broadcom Tigon3 ethernet driver");
@@ -1099,8 +1098,7 @@
i = mdiobus_register(tp->mdio_bus);
if (i) {
- printk(KERN_WARNING "%s: mdiobus_reg failed (0x%x)\n",
- tp->dev->name, i);
+ netdev_warn(tp->dev, "mdiobus_reg failed (0x%x)\n", i);
mdiobus_free(tp->mdio_bus);
return i;
}
@@ -1108,7 +1106,7 @@
phydev = tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR];
if (!phydev || !phydev->drv) {
- printk(KERN_WARNING "%s: No PHY devices\n", tp->dev->name);
+ netdev_warn(tp->dev, "No PHY devices\n");
mdiobus_unregister(tp->mdio_bus);
mdiobus_free(tp->mdio_bus);
return -ENODEV;
@@ -1252,27 +1250,22 @@
static void tg3_link_report(struct tg3 *tp)
{
if (!netif_carrier_ok(tp->dev)) {
- if (netif_msg_link(tp))
- printk(KERN_INFO PFX "%s: Link is down.\n",
- tp->dev->name);
+ netif_info(tp, link, tp->dev, "Link is down\n");
tg3_ump_link_report(tp);
} else if (netif_msg_link(tp)) {
- printk(KERN_INFO PFX "%s: Link is up at %d Mbps, %s duplex.\n",
- tp->dev->name,
- (tp->link_config.active_speed == SPEED_1000 ?
- 1000 :
- (tp->link_config.active_speed == SPEED_100 ?
- 100 : 10)),
- (tp->link_config.active_duplex == DUPLEX_FULL ?
- "full" : "half"));
+ netdev_info(tp->dev, "Link is up at %d Mbps, %s duplex\n",
+ (tp->link_config.active_speed == SPEED_1000 ?
+ 1000 :
+ (tp->link_config.active_speed == SPEED_100 ?
+ 100 : 10)),
+ (tp->link_config.active_duplex == DUPLEX_FULL ?
+ "full" : "half"));
- printk(KERN_INFO PFX
- "%s: Flow control is %s for TX and %s for RX.\n",
- tp->dev->name,
- (tp->link_config.active_flowctrl & FLOW_CTRL_TX) ?
- "on" : "off",
- (tp->link_config.active_flowctrl & FLOW_CTRL_RX) ?
- "on" : "off");
+ netdev_info(tp->dev, "Flow control is %s for TX and %s for RX\n",
+ (tp->link_config.active_flowctrl & FLOW_CTRL_TX) ?
+ "on" : "off",
+ (tp->link_config.active_flowctrl & FLOW_CTRL_RX) ?
+ "on" : "off");
tg3_ump_link_report(tp);
}
}
@@ -1471,7 +1464,7 @@
phydev = phy_connect(tp->dev, dev_name(&phydev->dev), tg3_adjust_link,
phydev->dev_flags, phydev->interface);
if (IS_ERR(phydev)) {
- printk(KERN_ERR "%s: Could not attach to PHY\n", tp->dev->name);
+ netdev_err(tp->dev, "Could not attach to PHY\n");
return PTR_ERR(phydev);
}
@@ -2500,8 +2493,8 @@
break;
default:
- printk(KERN_ERR PFX "%s: Invalid power state (D%d) requested\n",
- tp->dev->name, state);
+ netdev_err(tp->dev, "Invalid power state (D%d) requested\n",
+ state);
return -EINVAL;
}
@@ -4342,10 +4335,8 @@
BUG_ON((tp->tg3_flags & TG3_FLAG_MBOX_WRITE_REORDER) ||
tp->write32_tx_mbox == tg3_write_indirect_mbox);
- printk(KERN_WARNING PFX "%s: The system may be re-ordering memory-"
- "mapped I/O cycles to the network device, attempting to "
- "recover. Please report the problem to the driver maintainer "
- "and include system chipset information.\n", tp->dev->name);
+ netdev_warn(tp->dev, "The system may be re-ordering memory-mapped I/O cycles to the network device, attempting to recover\n"
+ "Please report the problem to the driver maintainer and include system chipset information.\n");
spin_lock(&tp->lock);
tp->tg3_flags |= TG3_FLAG_TX_RECOVERY_PENDING;
@@ -5269,8 +5260,7 @@
err = tg3_init_hw(tp, reset_phy);
if (err) {
- printk(KERN_ERR PFX "%s: Failed to re-initialize device, "
- "aborting.\n", tp->dev->name);
+ netdev_err(tp->dev, "Failed to re-initialize device, aborting\n");
tg3_halt(tp, RESET_KIND_SHUTDOWN, 1);
tg3_full_unlock(tp);
del_timer_sync(&tp->timer);
@@ -5343,10 +5333,10 @@
static void tg3_dump_short_state(struct tg3 *tp)
{
- printk(KERN_ERR PFX "DEBUG: MAC_TX_STATUS[%08x] MAC_RX_STATUS[%08x]\n",
- tr32(MAC_TX_STATUS), tr32(MAC_RX_STATUS));
- printk(KERN_ERR PFX "DEBUG: RDMAC_STATUS[%08x] WDMAC_STATUS[%08x]\n",
- tr32(RDMAC_STATUS), tr32(WDMAC_STATUS));
+ netdev_err(tp->dev, "DEBUG: MAC_TX_STATUS[%08x] MAC_RX_STATUS[%08x]\n",
+ tr32(MAC_TX_STATUS), tr32(MAC_RX_STATUS));
+ netdev_err(tp->dev, "DEBUG: RDMAC_STATUS[%08x] WDMAC_STATUS[%08x]\n",
+ tr32(RDMAC_STATUS), tr32(WDMAC_STATUS));
}
static void tg3_tx_timeout(struct net_device *dev)
@@ -5354,8 +5344,7 @@
struct tg3 *tp = netdev_priv(dev);
if (netif_msg_tx_err(tp)) {
- printk(KERN_ERR PFX "%s: transmit timed out, resetting\n",
- dev->name);
+ netdev_err(dev, "transmit timed out, resetting\n");
tg3_dump_short_state(tp);
}
@@ -5519,8 +5508,7 @@
netif_tx_stop_queue(txq);
/* This is a hard error, log it. */
- printk(KERN_ERR PFX "%s: BUG! Tx Ring full when "
- "queue awake!\n", dev->name);
+ netdev_err(dev, "BUG! Tx Ring full when queue awake!\n");
}
return NETDEV_TX_BUSY;
}
@@ -5723,8 +5711,7 @@
netif_tx_stop_queue(txq);
/* This is a hard error, log it. */
- printk(KERN_ERR PFX "%s: BUG! Tx Ring full when "
- "queue awake!\n", dev->name);
+ netdev_err(dev, "BUG! Tx Ring full when queue awake!\n");
}
return NETDEV_TX_BUSY;
}
@@ -6071,11 +6058,8 @@
/* Now allocate fresh SKBs for each rx ring. */
for (i = 0; i < tp->rx_pending; i++) {
if (tg3_alloc_rx_skb(tp, tpr, RXD_OPAQUE_RING_STD, i) < 0) {
- printk(KERN_WARNING PFX
- "%s: Using a smaller RX standard ring, "
- "only %d out of %d buffers were allocated "
- "successfully.\n",
- tp->dev->name, i, tp->rx_pending);
+ netdev_warn(tp->dev, "Using a smaller RX standard ring, only %d out of %d buffers were allocated successfully\n",
+ i, tp->rx_pending);
if (i == 0)
goto initfail;
tp->rx_pending = i;
@@ -6104,11 +6088,8 @@
for (i = 0; i < tp->rx_jumbo_pending; i++) {
if (tg3_alloc_rx_skb(tp, tpr, RXD_OPAQUE_RING_JUMBO, i) < 0) {
- printk(KERN_WARNING PFX
- "%s: Using a smaller RX jumbo ring, "
- "only %d out of %d buffers were "
- "allocated successfully.\n",
- tp->dev->name, i, tp->rx_jumbo_pending);
+ netdev_warn(tp->dev, "Using a smaller RX jumbo ring, only %d out of %d buffers were allocated successfully\n",
+ i, tp->rx_jumbo_pending);
if (i == 0)
goto initfail;
tp->rx_jumbo_pending = i;
@@ -6452,8 +6433,7 @@
}
if (i == MAX_WAIT_CNT && !silent) {
- printk(KERN_ERR PFX "tg3_stop_block timed out, "
- "ofs=%lx enable_bit=%x\n",
+ pr_err("tg3_stop_block timed out, ofs=%lx enable_bit=%x\n",
ofs, enable_bit);
return -ENODEV;
}
@@ -6500,9 +6480,8 @@
break;
}
if (i >= MAX_WAIT_CNT) {
- printk(KERN_ERR PFX "tg3_abort_hw timed out for %s, "
- "TX_MODE_ENABLE will not clear MAC_TX_MODE=%08x\n",
- tp->dev->name, tr32(MAC_TX_MODE));
+ netdev_err(tp->dev, "%s timed out, TX_MODE_ENABLE will not clear MAC_TX_MODE=%08x\n",
+ __func__, tr32(MAC_TX_MODE));
err |= -ENODEV;
}
@@ -6723,8 +6702,7 @@
!(tp->tg3_flags2 & TG3_FLG2_NO_FWARE_REPORTED)) {
tp->tg3_flags2 |= TG3_FLG2_NO_FWARE_REPORTED;
- printk(KERN_INFO PFX "%s: No firmware running.\n",
- tp->dev->name);
+ netdev_info(tp->dev, "No firmware running\n");
}
if (tp->pci_chip_rev_id == CHIPREV_ID_57765_A0) {
@@ -7152,10 +7130,8 @@
}
if (i >= 10000) {
- printk(KERN_ERR PFX "tg3_reset_cpu timed out for %s, "
- "and %s CPU\n",
- tp->dev->name,
- (offset == RX_CPU_BASE ? "RX" : "TX"));
+ netdev_err(tp->dev, "%s timed out, %s CPU\n",
+ __func__, offset == RX_CPU_BASE ? "RX" : "TX");
return -ENODEV;
}
@@ -7180,9 +7156,8 @@
if (cpu_base == TX_CPU_BASE &&
(tp->tg3_flags2 & TG3_FLG2_5705_PLUS)) {
- printk(KERN_ERR PFX "tg3_load_firmware_cpu: Trying to load "
- "TX cpu firmware on %s which is 5705.\n",
- tp->dev->name);
+ netdev_err(tp->dev, "%s: Trying to load TX cpu firmware which is 5705\n",
+ __func__);
return -EINVAL;
}
@@ -7261,10 +7236,8 @@
udelay(1000);
}
if (i >= 5) {
- printk(KERN_ERR PFX "tg3_load_firmware fails for %s "
- "to set RX CPU PC, is %08x should be %08x\n",
- tp->dev->name, tr32(RX_CPU_BASE + CPU_PC),
- info.fw_base);
+ netdev_err(tp->dev, "tg3_load_firmware fails to set RX CPU PC, is %08x should be %08x\n",
+ tr32(RX_CPU_BASE + CPU_PC), info.fw_base);
return -ENODEV;
}
tw32(RX_CPU_BASE + CPU_STATE, 0xffffffff);
@@ -7327,10 +7300,8 @@
udelay(1000);
}
if (i >= 5) {
- printk(KERN_ERR PFX "tg3_load_tso_firmware fails for %s "
- "to set CPU PC, is %08x should be %08x\n",
- tp->dev->name, tr32(cpu_base + CPU_PC),
- info.fw_base);
+ netdev_err(tp->dev, "%s fails to set CPU PC, is %08x should be %08x\n",
+ __func__, tr32(cpu_base + CPU_PC), info.fw_base);
return -ENODEV;
}
tw32(cpu_base + CPU_STATE, 0xffffffff);
@@ -7791,8 +7762,7 @@
udelay(10);
}
if (i >= 2000) {
- printk(KERN_ERR PFX "tg3_reset_hw cannot enable BUFMGR for %s.\n",
- tp->dev->name);
+ netdev_err(tp->dev, "%s cannot enable BUFMGR\n", __func__);
return -ENODEV;
}
@@ -8655,10 +8625,8 @@
return err;
/* MSI test failed, go back to INTx mode */
- printk(KERN_WARNING PFX "%s: No interrupt was generated using MSI, "
- "switching to INTx mode. Please report this failure to "
- "the PCI maintainer and include system chipset information.\n",
- tp->dev->name);
+ netdev_warn(tp->dev, "No interrupt was generated using MSI, switching to INTx mode\n"
+ "Please report this failure to the PCI maintainer and include system chipset information\n");
free_irq(tp->napi[0].irq_vec, &tp->napi[0]);
@@ -8691,8 +8659,8 @@
const __be32 *fw_data;
if (request_firmware(&tp->fw, tp->fw_needed, &tp->pdev->dev)) {
- printk(KERN_ERR "%s: Failed to load firmware \"%s\"\n",
- tp->dev->name, tp->fw_needed);
+ netdev_err(tp->dev, "Failed to load firmware \"%s\"\n",
+ tp->fw_needed);
return -ENOENT;
}
@@ -8705,8 +8673,8 @@
tp->fw_len = be32_to_cpu(fw_data[2]); /* includes bss */
if (tp->fw_len < (tp->fw->size - 12)) {
- printk(KERN_ERR "%s: bogus length %d in \"%s\"\n",
- tp->dev->name, tp->fw_len, tp->fw_needed);
+ netdev_err(tp->dev, "bogus length %d in \"%s\"\n",
+ tp->fw_len, tp->fw_needed);
release_firmware(tp->fw);
tp->fw = NULL;
return -EINVAL;
@@ -8744,9 +8712,8 @@
return false;
if (pci_enable_msix(tp->pdev, msix_ent, rc))
return false;
- printk(KERN_NOTICE
- "%s: Requested %d MSI-X vectors, received %d\n",
- tp->dev->name, tp->irq_cnt, rc);
+ netdev_notice(tp->dev, "Requested %d MSI-X vectors, received %d\n",
+ tp->irq_cnt, rc);
tp->irq_cnt = rc;
}
@@ -8771,8 +8738,7 @@
/* All MSI supporting chips should support tagged
* status. Assert that this is the case.
*/
- printk(KERN_WARNING PFX "%s: MSI without TAGGED? "
- "Not using MSI.\n", tp->dev->name);
+ netdev_warn(tp->dev, "MSI without TAGGED? Not using MSI\n");
goto defcfg;
}
@@ -8817,12 +8783,10 @@
if (err)
return err;
} else if (err) {
- printk(KERN_WARNING "%s: TSO capability disabled.\n",
- tp->dev->name);
+ netdev_warn(tp->dev, "TSO capability disabled\n");
tp->tg3_flags2 &= ~TG3_FLG2_TSO_CAPABLE;
} else if (!(tp->tg3_flags2 & TG3_FLG2_TSO_CAPABLE)) {
- printk(KERN_NOTICE "%s: TSO capability restored.\n",
- tp->dev->name);
+ netdev_notice(tp->dev, "TSO capability restored\n");
tp->tg3_flags2 |= TG3_FLG2_TSO_CAPABLE;
}
}
@@ -10687,8 +10651,7 @@
out:
if (netif_msg_hw(tp))
- printk(KERN_ERR PFX "Register test failed at offset %x\n",
- offset);
+ pr_err("Register test failed at offset %x\n", offset);
tw32(offset, save_val);
return -EIO;
}
@@ -11815,8 +11778,8 @@
tp->tg3_flags |= TG3_FLAG_NVRAM;
if (tg3_nvram_lock(tp)) {
- printk(KERN_WARNING PFX "%s: Cannot get nvarm lock, "
- "tg3_nvram_init failed.\n", tp->dev->name);
+ netdev_warn(tp->dev, "Cannot get nvram lock, %s failed\n",
+ __func__);
return;
}
tg3_enable_nvram_access(tp);
@@ -13280,8 +13243,7 @@
(tp->tg3_flags2 & TG3_FLG2_5780_CLASS)) {
tp->pcix_cap = pci_find_capability(tp->pdev, PCI_CAP_ID_PCIX);
if (!tp->pcix_cap) {
- printk(KERN_ERR PFX "Cannot find PCI-X "
- "capability, aborting.\n");
+ pr_err("Cannot find PCI-X capability, aborting\n");
return -EIO;
}
@@ -13478,8 +13440,7 @@
/* Force the chip into D0. */
err = tg3_set_power_state(tp, PCI_D0);
if (err) {
- printk(KERN_ERR PFX "(%s) transition to D0 failed\n",
- pci_name(tp->pdev));
+ pr_err("(%s) transition to D0 failed\n", pci_name(tp->pdev));
return err;
}
@@ -13653,7 +13614,7 @@
err = tg3_phy_probe(tp);
if (err) {
- printk(KERN_ERR PFX "(%s) phy probe failed, err %d\n",
+ pr_err("(%s) phy probe failed, err %d\n",
pci_name(tp->pdev), err);
/* ... but do not return immediately ... */
tg3_mdio_fini(tp);
@@ -14163,7 +14124,8 @@
/* Send the buffer to the chip. */
ret = tg3_do_test_dma(tp, buf, buf_dma, TEST_BUFFER_SIZE, 1);
if (ret) {
- printk(KERN_ERR "tg3_test_dma() Write the buffer failed %d\n", ret);
+ pr_err("tg3_test_dma() Write the buffer failed %d\n",
+ ret);
break;
}
@@ -14173,7 +14135,8 @@
u32 val;
tg3_read_mem(tp, 0x2100 + (i*4), &val);
if (le32_to_cpu(val) != p[i]) {
- printk(KERN_ERR " tg3_test_dma() Card buffer corrupted on write! (%d != %d)\n", val, i);
+ pr_err(" tg3_test_dma() Card buffer corrupted on write! (%d != %d)\n",
+ val, i);
/* ret = -ENODEV here? */
}
p[i] = 0;
@@ -14182,7 +14145,8 @@
/* Now read it back. */
ret = tg3_do_test_dma(tp, buf, buf_dma, TEST_BUFFER_SIZE, 0);
if (ret) {
- printk(KERN_ERR "tg3_test_dma() Read the buffer failed %d\n", ret);
+ pr_err("tg3_test_dma() Read the buffer failed %d\n",
+ ret);
break;
}
@@ -14199,7 +14163,8 @@
tw32(TG3PCI_DMA_RW_CTRL, tp->dma_rwctrl);
break;
} else {
- printk(KERN_ERR "tg3_test_dma() buffer corrupted on read back! (%d != %d)\n", p[i], i);
+ pr_err("tg3_test_dma() buffer corrupted on read back! (%d != %d)\n",
+ p[i], i);
ret = -ENODEV;
goto out;
}
@@ -14480,7 +14445,6 @@
static int __devinit tg3_init_one(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
- static int tg3_version_printed = 0;
struct net_device *dev;
struct tg3 *tp;
int i, err, pm_cap;
@@ -14488,20 +14452,17 @@
char str[40];
u64 dma_mask, persist_dma_mask;
- if (tg3_version_printed++ == 0)
- printk(KERN_INFO "%s", version);
+ printk_once(KERN_INFO "%s\n", version);
err = pci_enable_device(pdev);
if (err) {
- printk(KERN_ERR PFX "Cannot enable PCI device, "
- "aborting.\n");
+ pr_err("Cannot enable PCI device, aborting\n");
return err;
}
err = pci_request_regions(pdev, DRV_MODULE_NAME);
if (err) {
- printk(KERN_ERR PFX "Cannot obtain PCI resources, "
- "aborting.\n");
+ pr_err("Cannot obtain PCI resources, aborting\n");
goto err_out_disable_pdev;
}
@@ -14510,15 +14471,14 @@
/* Find power-management capability. */
pm_cap = pci_find_capability(pdev, PCI_CAP_ID_PM);
if (pm_cap == 0) {
- printk(KERN_ERR PFX "Cannot find PowerManagement capability, "
- "aborting.\n");
+ pr_err("Cannot find PowerManagement capability, aborting\n");
err = -EIO;
goto err_out_free_res;
}
dev = alloc_etherdev_mq(sizeof(*tp), TG3_IRQ_MAX_VECS);
if (!dev) {
- printk(KERN_ERR PFX "Etherdev alloc failed, aborting.\n");
+ pr_err("Etherdev alloc failed, aborting\n");
err = -ENOMEM;
goto err_out_free_res;
}
@@ -14568,8 +14528,7 @@
tp->regs = pci_ioremap_bar(pdev, BAR_0);
if (!tp->regs) {
- printk(KERN_ERR PFX "Cannot map device registers, "
- "aborting.\n");
+ netdev_err(dev, "Cannot map device registers, aborting\n");
err = -ENOMEM;
goto err_out_free_dev;
}
@@ -14585,8 +14544,7 @@
err = tg3_get_invariants(tp);
if (err) {
- printk(KERN_ERR PFX "Problem fetching invariants of chip, "
- "aborting.\n");
+ netdev_err(dev, "Problem fetching invariants of chip, aborting\n");
goto err_out_iounmap;
}
@@ -14621,8 +14579,7 @@
err = pci_set_consistent_dma_mask(pdev,
persist_dma_mask);
if (err < 0) {
- printk(KERN_ERR PFX "Unable to obtain 64 bit "
- "DMA for consistent allocations\n");
+ netdev_err(dev, "Unable to obtain 64 bit DMA for consistent allocations\n");
goto err_out_iounmap;
}
}
@@ -14630,8 +14587,7 @@
if (err || dma_mask == DMA_BIT_MASK(32)) {
err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
if (err) {
- printk(KERN_ERR PFX "No usable DMA configuration, "
- "aborting.\n");
+ netdev_err(dev, "No usable DMA configuration, aborting\n");
goto err_out_iounmap;
}
}
@@ -14680,16 +14636,14 @@
err = tg3_get_device_address(tp);
if (err) {
- printk(KERN_ERR PFX "Could not obtain valid ethernet address, "
- "aborting.\n");
+ netdev_err(dev, "Could not obtain valid ethernet address, aborting\n");
goto err_out_iounmap;
}
if (tp->tg3_flags3 & TG3_FLG3_ENABLE_APE) {
tp->aperegs = pci_ioremap_bar(pdev, BAR_2);
if (!tp->aperegs) {
- printk(KERN_ERR PFX "Cannot map APE registers, "
- "aborting.\n");
+ netdev_err(dev, "Cannot map APE registers, aborting\n");
err = -ENOMEM;
goto err_out_iounmap;
}
@@ -14713,7 +14667,7 @@
err = tg3_test_dma(tp);
if (err) {
- printk(KERN_ERR PFX "DMA engine test failed, aborting.\n");
+ netdev_err(dev, "DMA engine test failed, aborting\n");
goto err_out_apeunmap;
}
@@ -14774,45 +14728,39 @@
err = register_netdev(dev);
if (err) {
- printk(KERN_ERR PFX "Cannot register net device, "
- "aborting.\n");
+ netdev_err(dev, "Cannot register net device, aborting\n");
goto err_out_apeunmap;
}
- printk(KERN_INFO "%s: Tigon3 [partno(%s) rev %04x] (%s) MAC address %pM\n",
- dev->name,
- tp->board_part_number,
- tp->pci_chip_rev_id,
- tg3_bus_string(tp, str),
- dev->dev_addr);
+ netdev_info(dev, "Tigon3 [partno(%s) rev %04x] (%s) MAC address %pM\n",
+ tp->board_part_number,
+ tp->pci_chip_rev_id,
+ tg3_bus_string(tp, str),
+ dev->dev_addr);
if (tp->tg3_flags3 & TG3_FLG3_PHY_CONNECTED) {
struct phy_device *phydev;
phydev = tp->mdio_bus->phy_map[TG3_PHY_MII_ADDR];
- printk(KERN_INFO
- "%s: attached PHY driver [%s] (mii_bus:phy_addr=%s)\n",
- tp->dev->name, phydev->drv->name,
- dev_name(&phydev->dev));
+ netdev_info(dev, "attached PHY driver [%s] (mii_bus:phy_addr=%s)\n",
+ phydev->drv->name, dev_name(&phydev->dev));
} else
- printk(KERN_INFO
- "%s: attached PHY is %s (%s Ethernet) (WireSpeed[%d])\n",
- tp->dev->name, tg3_phy_string(tp),
- ((tp->tg3_flags & TG3_FLAG_10_100_ONLY) ? "10/100Base-TX" :
- ((tp->tg3_flags2 & TG3_FLG2_ANY_SERDES) ? "1000Base-SX" :
- "10/100/1000Base-T")),
- (tp->tg3_flags2 & TG3_FLG2_NO_ETH_WIRE_SPEED) == 0);
+ netdev_info(dev, "attached PHY is %s (%s Ethernet) (WireSpeed[%d])\n",
+ tg3_phy_string(tp),
+ ((tp->tg3_flags & TG3_FLAG_10_100_ONLY) ? "10/100Base-TX" :
+ ((tp->tg3_flags2 & TG3_FLG2_ANY_SERDES) ? "1000Base-SX" :
+ "10/100/1000Base-T")),
+ (tp->tg3_flags2 & TG3_FLG2_NO_ETH_WIRE_SPEED) == 0);
- printk(KERN_INFO "%s: RXcsums[%d] LinkChgREG[%d] MIirq[%d] ASF[%d] TSOcap[%d]\n",
- dev->name,
- (tp->tg3_flags & TG3_FLAG_RX_CHECKSUMS) != 0,
- (tp->tg3_flags & TG3_FLAG_USE_LINKCHG_REG) != 0,
- (tp->tg3_flags & TG3_FLAG_USE_MI_INTERRUPT) != 0,
- (tp->tg3_flags & TG3_FLAG_ENABLE_ASF) != 0,
- (tp->tg3_flags2 & TG3_FLG2_TSO_CAPABLE) != 0);
- printk(KERN_INFO "%s: dma_rwctrl[%08x] dma_mask[%d-bit]\n",
- dev->name, tp->dma_rwctrl,
- (pdev->dma_mask == DMA_BIT_MASK(32)) ? 32 :
- (((u64) pdev->dma_mask == DMA_BIT_MASK(40)) ? 40 : 64));
+ netdev_info(dev, "RXcsums[%d] LinkChgREG[%d] MIirq[%d] ASF[%d] TSOcap[%d]\n",
+ (tp->tg3_flags & TG3_FLAG_RX_CHECKSUMS) != 0,
+ (tp->tg3_flags & TG3_FLAG_USE_LINKCHG_REG) != 0,
+ (tp->tg3_flags & TG3_FLAG_USE_MI_INTERRUPT) != 0,
+ (tp->tg3_flags & TG3_FLAG_ENABLE_ASF) != 0,
+ (tp->tg3_flags2 & TG3_FLG2_TSO_CAPABLE) != 0);
+ netdev_info(dev, "dma_rwctrl[%08x] dma_mask[%d-bit]\n",
+ tp->dma_rwctrl,
+ pdev->dma_mask == DMA_BIT_MASK(32) ? 32 :
+ ((u64)pdev->dma_mask) == DMA_BIT_MASK(40) ? 40 : 64);
return 0;