| /* |
| * CoreChip-sz SR9700 one chip USB 1.1 Ethernet Devices |
| * |
| * Author : Liu Junliang <liujunliang_ljl@163.com> |
| * |
| * Based on dm9601.c |
| * |
| * This file is licensed under the terms of the GNU General Public License |
| * version 2. This program is licensed "as is" without any warranty of any |
| * kind, whether express or implied. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/sched.h> |
| #include <linux/stddef.h> |
| #include <linux/init.h> |
| #include <linux/netdevice.h> |
| #include <linux/etherdevice.h> |
| #include <linux/ethtool.h> |
| #include <linux/mii.h> |
| #include <linux/usb.h> |
| #include <linux/crc32.h> |
| #include <linux/usb/usbnet.h> |
| |
| #include "sr9700.h" |
| |
| static int sr_read(struct usbnet *dev, u8 reg, u16 length, void *data) |
| { |
| int err; |
| |
| err = usbnet_read_cmd(dev, SR_RD_REGS, SR_REQ_RD_REG, 0, reg, data, |
| length); |
| if ((err != length) && (err >= 0)) |
| err = -EINVAL; |
| return err; |
| } |
| |
| static int sr_write(struct usbnet *dev, u8 reg, u16 length, void *data) |
| { |
| int err; |
| |
| err = usbnet_write_cmd(dev, SR_WR_REGS, SR_REQ_WR_REG, 0, reg, data, |
| length); |
| if ((err >= 0) && (err < length)) |
| err = -EINVAL; |
| return err; |
| } |
| |
| static int sr_read_reg(struct usbnet *dev, u8 reg, u8 *value) |
| { |
| return sr_read(dev, reg, 1, value); |
| } |
| |
| static int sr_write_reg(struct usbnet *dev, u8 reg, u8 value) |
| { |
| return usbnet_write_cmd(dev, SR_WR_REGS, SR_REQ_WR_REG, |
| value, reg, NULL, 0); |
| } |
| |
| static void sr_write_async(struct usbnet *dev, u8 reg, u16 length, void *data) |
| { |
| usbnet_write_cmd_async(dev, SR_WR_REGS, SR_REQ_WR_REG, |
| 0, reg, data, length); |
| } |
| |
| static void sr_write_reg_async(struct usbnet *dev, u8 reg, u8 value) |
| { |
| usbnet_write_cmd_async(dev, SR_WR_REGS, SR_REQ_WR_REG, |
| value, reg, NULL, 0); |
| } |
| |
| static int wait_phy_eeprom_ready(struct usbnet *dev, int phy) |
| { |
| int i; |
| |
| for (i = 0; i < SR_SHARE_TIMEOUT; i++) { |
| u8 tmp = 0; |
| int ret; |
| |
| udelay(1); |
| ret = sr_read_reg(dev, EPCR, &tmp); |
| if (ret < 0) |
| return ret; |
| |
| /* ready */ |
| if (!(tmp & EPCR_ERRE)) |
| return 0; |
| } |
| |
| netdev_err(dev->net, "%s write timed out!\n", phy ? "phy" : "eeprom"); |
| |
| return -EIO; |
| } |
| |
| static int sr_share_read_word(struct usbnet *dev, int phy, u8 reg, |
| __le16 *value) |
| { |
| int ret; |
| |
| mutex_lock(&dev->phy_mutex); |
| |
| sr_write_reg(dev, EPAR, phy ? (reg | EPAR_PHY_ADR) : reg); |
| sr_write_reg(dev, EPCR, phy ? (EPCR_EPOS | EPCR_ERPRR) : EPCR_ERPRR); |
| |
| ret = wait_phy_eeprom_ready(dev, phy); |
| if (ret < 0) |
| goto out_unlock; |
| |
| sr_write_reg(dev, EPCR, 0x0); |
| ret = sr_read(dev, EPDR, 2, value); |
| |
| netdev_dbg(dev->net, "read shared %d 0x%02x returned 0x%04x, %d\n", |
| phy, reg, *value, ret); |
| |
| out_unlock: |
| mutex_unlock(&dev->phy_mutex); |
| return ret; |
| } |
| |
| static int sr_share_write_word(struct usbnet *dev, int phy, u8 reg, |
| __le16 value) |
| { |
| int ret; |
| |
| mutex_lock(&dev->phy_mutex); |
| |
| ret = sr_write(dev, EPDR, 2, &value); |
| if (ret < 0) |
| goto out_unlock; |
| |
| sr_write_reg(dev, EPAR, phy ? (reg | EPAR_PHY_ADR) : reg); |
| sr_write_reg(dev, EPCR, phy ? (EPCR_WEP | EPCR_EPOS | EPCR_ERPRW) : |
| (EPCR_WEP | EPCR_ERPRW)); |
| |
| ret = wait_phy_eeprom_ready(dev, phy); |
| if (ret < 0) |
| goto out_unlock; |
| |
| sr_write_reg(dev, EPCR, 0x0); |
| |
| out_unlock: |
| mutex_unlock(&dev->phy_mutex); |
| return ret; |
| } |
| |
| static int sr_read_eeprom_word(struct usbnet *dev, u8 offset, void *value) |
| { |
| return sr_share_read_word(dev, 0, offset, value); |
| } |
| |
| static int sr9700_get_eeprom_len(struct net_device *netdev) |
| { |
| return SR_EEPROM_LEN; |
| } |
| |
| static int sr9700_get_eeprom(struct net_device *netdev, |
| struct ethtool_eeprom *eeprom, u8 *data) |
| { |
| struct usbnet *dev = netdev_priv(netdev); |
| __le16 *buf = (__le16 *)data; |
| int ret = 0; |
| int i; |
| |
| /* access is 16bit */ |
| if ((eeprom->offset & 0x01) || (eeprom->len & 0x01)) |
| return -EINVAL; |
| |
| for (i = 0; i < eeprom->len / 2; i++) { |
| ret = sr_read_eeprom_word(dev, eeprom->offset / 2 + i, buf + i); |
| if (ret < 0) |
| break; |
| } |
| |
| return ret; |
| } |
| |
| static int sr_mdio_read(struct net_device *netdev, int phy_id, int loc) |
| { |
| struct usbnet *dev = netdev_priv(netdev); |
| __le16 res; |
| int rc = 0; |
| |
| if (phy_id) { |
| netdev_dbg(netdev, "Only internal phy supported\n"); |
| return 0; |
| } |
| |
| /* Access NSR_LINKST bit for link status instead of MII_BMSR */ |
| if (loc == MII_BMSR) { |
| u8 value; |
| |
| sr_read_reg(dev, NSR, &value); |
| if (value & NSR_LINKST) |
| rc = 1; |
| } |
| sr_share_read_word(dev, 1, loc, &res); |
| if (rc == 1) |
| res = le16_to_cpu(res) | BMSR_LSTATUS; |
| else |
| res = le16_to_cpu(res) & ~BMSR_LSTATUS; |
| |
| netdev_dbg(netdev, "sr_mdio_read() phy_id=0x%02x, loc=0x%02x, returns=0x%04x\n", |
| phy_id, loc, res); |
| |
| return res; |
| } |
| |
| static void sr_mdio_write(struct net_device *netdev, int phy_id, int loc, |
| int val) |
| { |
| struct usbnet *dev = netdev_priv(netdev); |
| __le16 res = cpu_to_le16(val); |
| |
| if (phy_id) { |
| netdev_dbg(netdev, "Only internal phy supported\n"); |
| return; |
| } |
| |
| netdev_dbg(netdev, "sr_mdio_write() phy_id=0x%02x, loc=0x%02x, val=0x%04x\n", |
| phy_id, loc, val); |
| |
| sr_share_write_word(dev, 1, loc, res); |
| } |
| |
| static u32 sr9700_get_link(struct net_device *netdev) |
| { |
| struct usbnet *dev = netdev_priv(netdev); |
| u8 value = 0; |
| int rc = 0; |
| |
| /* Get the Link Status directly */ |
| sr_read_reg(dev, NSR, &value); |
| if (value & NSR_LINKST) |
| rc = 1; |
| |
| return rc; |
| } |
| |
| static int sr9700_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd) |
| { |
| struct usbnet *dev = netdev_priv(netdev); |
| |
| return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL); |
| } |
| |
| static const struct ethtool_ops sr9700_ethtool_ops = { |
| .get_drvinfo = usbnet_get_drvinfo, |
| .get_link = sr9700_get_link, |
| .get_msglevel = usbnet_get_msglevel, |
| .set_msglevel = usbnet_set_msglevel, |
| .get_eeprom_len = sr9700_get_eeprom_len, |
| .get_eeprom = sr9700_get_eeprom, |
| .get_settings = usbnet_get_settings, |
| .set_settings = usbnet_set_settings, |
| .nway_reset = usbnet_nway_reset, |
| }; |
| |
| static void sr9700_set_multicast(struct net_device *netdev) |
| { |
| struct usbnet *dev = netdev_priv(netdev); |
| /* We use the 20 byte dev->data for our 8 byte filter buffer |
| * to avoid allocating memory that is tricky to free later |
| */ |
| u8 *hashes = (u8 *)&dev->data; |
| /* rx_ctl setting : enable, disable_long, disable_crc */ |
| u8 rx_ctl = RCR_RXEN | RCR_DIS_CRC | RCR_DIS_LONG; |
| |
| memset(hashes, 0x00, SR_MCAST_SIZE); |
| /* broadcast address */ |
| hashes[SR_MCAST_SIZE - 1] |= SR_MCAST_ADDR_FLAG; |
| if (netdev->flags & IFF_PROMISC) { |
| rx_ctl |= RCR_PRMSC; |
| } else if (netdev->flags & IFF_ALLMULTI || |
| netdev_mc_count(netdev) > SR_MCAST_MAX) { |
| rx_ctl |= RCR_RUNT; |
| } else if (!netdev_mc_empty(netdev)) { |
| struct netdev_hw_addr *ha; |
| |
| netdev_for_each_mc_addr(ha, netdev) { |
| u32 crc = ether_crc(ETH_ALEN, ha->addr) >> 26; |
| hashes[crc >> 3] |= 1 << (crc & 0x7); |
| } |
| } |
| |
| sr_write_async(dev, MAR, SR_MCAST_SIZE, hashes); |
| sr_write_reg_async(dev, RCR, rx_ctl); |
| } |
| |
| static int sr9700_set_mac_address(struct net_device *netdev, void *p) |
| { |
| struct usbnet *dev = netdev_priv(netdev); |
| struct sockaddr *addr = p; |
| |
| if (!is_valid_ether_addr(addr->sa_data)) { |
| netdev_err(netdev, "not setting invalid mac address %pM\n", |
| addr->sa_data); |
| return -EINVAL; |
| } |
| |
| memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len); |
| sr_write_async(dev, PAR, 6, netdev->dev_addr); |
| |
| return 0; |
| } |
| |
| static const struct net_device_ops sr9700_netdev_ops = { |
| .ndo_open = usbnet_open, |
| .ndo_stop = usbnet_stop, |
| .ndo_start_xmit = usbnet_start_xmit, |
| .ndo_tx_timeout = usbnet_tx_timeout, |
| .ndo_change_mtu = usbnet_change_mtu, |
| .ndo_validate_addr = eth_validate_addr, |
| .ndo_do_ioctl = sr9700_ioctl, |
| .ndo_set_rx_mode = sr9700_set_multicast, |
| .ndo_set_mac_address = sr9700_set_mac_address, |
| }; |
| |
| static int sr9700_bind(struct usbnet *dev, struct usb_interface *intf) |
| { |
| struct net_device *netdev; |
| struct mii_if_info *mii; |
| int ret; |
| |
| ret = usbnet_get_endpoints(dev, intf); |
| if (ret) |
| goto out; |
| |
| netdev = dev->net; |
| |
| netdev->netdev_ops = &sr9700_netdev_ops; |
| netdev->ethtool_ops = &sr9700_ethtool_ops; |
| netdev->hard_header_len += SR_TX_OVERHEAD; |
| dev->hard_mtu = netdev->mtu + netdev->hard_header_len; |
| /* bulkin buffer is preferably not less than 3K */ |
| dev->rx_urb_size = 3072; |
| |
| mii = &dev->mii; |
| mii->dev = netdev; |
| mii->mdio_read = sr_mdio_read; |
| mii->mdio_write = sr_mdio_write; |
| mii->phy_id_mask = 0x1f; |
| mii->reg_num_mask = 0x1f; |
| |
| sr_write_reg(dev, NCR, NCR_RST); |
| udelay(20); |
| |
| /* read MAC |
| * After Chip Power on, the Chip will reload the MAC from |
| * EEPROM automatically to PAR. In case there is no EEPROM externally, |
| * a default MAC address is stored in PAR for making chip work properly. |
| */ |
| if (sr_read(dev, PAR, ETH_ALEN, netdev->dev_addr) < 0) { |
| netdev_err(netdev, "Error reading MAC address\n"); |
| ret = -ENODEV; |
| goto out; |
| } |
| |
| /* power up and reset phy */ |
| sr_write_reg(dev, PRR, PRR_PHY_RST); |
| /* at least 10ms, here 20ms for safe */ |
| mdelay(20); |
| sr_write_reg(dev, PRR, 0); |
| /* at least 1ms, here 2ms for reading right register */ |
| udelay(2 * 1000); |
| |
| /* receive broadcast packets */ |
| sr9700_set_multicast(netdev); |
| |
| sr_mdio_write(netdev, mii->phy_id, MII_BMCR, BMCR_RESET); |
| sr_mdio_write(netdev, mii->phy_id, MII_ADVERTISE, ADVERTISE_ALL | |
| ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP); |
| mii_nway_restart(mii); |
| |
| out: |
| return ret; |
| } |
| |
| static int sr9700_rx_fixup(struct usbnet *dev, struct sk_buff *skb) |
| { |
| struct sk_buff *sr_skb; |
| int len; |
| |
| /* skb content (packets) format : |
| * p0 p1 p2 ...... pm |
| * / \ |
| * / \ |
| * / \ |
| * / \ |
| * p0b0 p0b1 p0b2 p0b3 ...... p0b(n-4) p0b(n-3)...p0bn |
| * |
| * p0 : packet 0 |
| * p0b0 : packet 0 byte 0 |
| * |
| * b0: rx status |
| * b1: packet length (incl crc) low |
| * b2: packet length (incl crc) high |
| * b3..n-4: packet data |
| * bn-3..bn: ethernet packet crc |
| */ |
| if (unlikely(skb->len < SR_RX_OVERHEAD)) { |
| netdev_err(dev->net, "unexpected tiny rx frame\n"); |
| return 0; |
| } |
| |
| /* one skb may contains multiple packets */ |
| while (skb->len > SR_RX_OVERHEAD) { |
| if (skb->data[0] != 0x40) |
| return 0; |
| |
| /* ignore the CRC length */ |
| len = (skb->data[1] | (skb->data[2] << 8)) - 4; |
| |
| if (len > ETH_FRAME_LEN) |
| return 0; |
| |
| /* the last packet of current skb */ |
| if (skb->len == (len + SR_RX_OVERHEAD)) { |
| skb_pull(skb, 3); |
| skb->len = len; |
| skb_set_tail_pointer(skb, len); |
| skb->truesize = len + sizeof(struct sk_buff); |
| return 2; |
| } |
| |
| /* skb_clone is used for address align */ |
| sr_skb = skb_clone(skb, GFP_ATOMIC); |
| if (!sr_skb) |
| return 0; |
| |
| sr_skb->len = len; |
| sr_skb->data = skb->data + 3; |
| skb_set_tail_pointer(sr_skb, len); |
| sr_skb->truesize = len + sizeof(struct sk_buff); |
| usbnet_skb_return(dev, sr_skb); |
| |
| skb_pull(skb, len + SR_RX_OVERHEAD); |
| }; |
| |
| return 0; |
| } |
| |
| static struct sk_buff *sr9700_tx_fixup(struct usbnet *dev, struct sk_buff *skb, |
| gfp_t flags) |
| { |
| int len; |
| |
| /* SR9700 can only send out one ethernet packet at once. |
| * |
| * b0 b1 b2 b3 ...... b(n-4) b(n-3)...bn |
| * |
| * b0: rx status |
| * b1: packet length (incl crc) low |
| * b2: packet length (incl crc) high |
| * b3..n-4: packet data |
| * bn-3..bn: ethernet packet crc |
| */ |
| |
| len = skb->len; |
| |
| if (skb_headroom(skb) < SR_TX_OVERHEAD) { |
| struct sk_buff *skb2; |
| |
| skb2 = skb_copy_expand(skb, SR_TX_OVERHEAD, 0, flags); |
| dev_kfree_skb_any(skb); |
| skb = skb2; |
| if (!skb) |
| return NULL; |
| } |
| |
| __skb_push(skb, SR_TX_OVERHEAD); |
| |
| /* usbnet adds padding if length is a multiple of packet size |
| * if so, adjust length value in header |
| */ |
| if ((skb->len % dev->maxpacket) == 0) |
| len++; |
| |
| skb->data[0] = len; |
| skb->data[1] = len >> 8; |
| |
| return skb; |
| } |
| |
| static void sr9700_status(struct usbnet *dev, struct urb *urb) |
| { |
| int link; |
| u8 *buf; |
| |
| /* format: |
| b0: net status |
| b1: tx status 1 |
| b2: tx status 2 |
| b3: rx status |
| b4: rx overflow |
| b5: rx count |
| b6: tx count |
| b7: gpr |
| */ |
| |
| if (urb->actual_length < 8) |
| return; |
| |
| buf = urb->transfer_buffer; |
| |
| link = !!(buf[0] & 0x40); |
| if (netif_carrier_ok(dev->net) != link) { |
| usbnet_link_change(dev, link, 1); |
| netdev_dbg(dev->net, "Link Status is: %d\n", link); |
| } |
| } |
| |
| static int sr9700_link_reset(struct usbnet *dev) |
| { |
| struct ethtool_cmd ecmd; |
| |
| mii_check_media(&dev->mii, 1, 1); |
| mii_ethtool_gset(&dev->mii, &ecmd); |
| |
| netdev_dbg(dev->net, "link_reset() speed: %d duplex: %d\n", |
| ecmd.speed, ecmd.duplex); |
| |
| return 0; |
| } |
| |
| static const struct driver_info sr9700_driver_info = { |
| .description = "CoreChip SR9700 USB Ethernet", |
| .flags = FLAG_ETHER, |
| .bind = sr9700_bind, |
| .rx_fixup = sr9700_rx_fixup, |
| .tx_fixup = sr9700_tx_fixup, |
| .status = sr9700_status, |
| .link_reset = sr9700_link_reset, |
| .reset = sr9700_link_reset, |
| }; |
| |
| static const struct usb_device_id products[] = { |
| { |
| USB_DEVICE(0x0fe6, 0x9700), /* SR9700 device */ |
| .driver_info = (unsigned long)&sr9700_driver_info, |
| }, |
| {}, /* END */ |
| }; |
| |
| MODULE_DEVICE_TABLE(usb, products); |
| |
| static struct usb_driver sr9700_usb_driver = { |
| .name = "sr9700", |
| .id_table = products, |
| .probe = usbnet_probe, |
| .disconnect = usbnet_disconnect, |
| .suspend = usbnet_suspend, |
| .resume = usbnet_resume, |
| .disable_hub_initiated_lpm = 1, |
| }; |
| |
| module_usb_driver(sr9700_usb_driver); |
| |
| MODULE_AUTHOR("liujl <liujunliang_ljl@163.com>"); |
| MODULE_DESCRIPTION("SR9700 one chip USB 1.1 USB to Ethernet device from http://www.corechip-sz.com/"); |
| MODULE_LICENSE("GPL"); |