Merge branch 'linus' into x86/memtest
diff --git a/.gitignore b/.gitignore
index 090b293..d24ad50 100644
--- a/.gitignore
+++ b/.gitignore
@@ -52,8 +52,8 @@
# cscope files
cscope.*
+ncscope.*
*.orig
-*.rej
*~
\#*#
diff --git a/Documentation/ABI/testing/sysfs-class-bdi b/Documentation/ABI/testing/sysfs-class-bdi
index 5ac1e01..5f50097 100644
--- a/Documentation/ABI/testing/sysfs-class-bdi
+++ b/Documentation/ABI/testing/sysfs-class-bdi
@@ -14,6 +14,10 @@
non-block filesystems which provide their own BDI, such as NFS
and FUSE.
+MAJOR:MINOR-fuseblk
+
+ Value of st_dev on fuseblk filesystems.
+
default
The default backing dev, used for non-block device backed
diff --git a/Documentation/DocBook/kernel-locking.tmpl b/Documentation/DocBook/kernel-locking.tmpl
index 77c42f4..2510763 100644
--- a/Documentation/DocBook/kernel-locking.tmpl
+++ b/Documentation/DocBook/kernel-locking.tmpl
@@ -703,6 +703,31 @@
</sect1>
</chapter>
+<chapter id="trylock-functions">
+ <title>The trylock Functions</title>
+ <para>
+ There are functions that try to acquire a lock only once and immediately
+ return a value telling about success or failure to acquire the lock.
+ They can be used if you need no access to the data protected with the lock
+ when some other thread is holding the lock. You should acquire the lock
+ later if you then need access to the data protected with the lock.
+ </para>
+
+ <para>
+ <function>spin_trylock()</function> does not spin but returns non-zero if
+ it acquires the spinlock on the first try or 0 if not. This function can
+ be used in all contexts like <function>spin_lock</function>: you must have
+ disabled the contexts that might interrupt you and acquire the spin lock.
+ </para>
+
+ <para>
+ <function>mutex_trylock()</function> does not suspend your task
+ but returns non-zero if it could lock the mutex on the first try
+ or 0 if not. This function cannot be safely used in hardware or software
+ interrupt contexts despite not sleeping.
+ </para>
+</chapter>
+
<chapter id="Examples">
<title>Common Examples</title>
<para>
diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches
index 9c93a03..118ca6e 100644
--- a/Documentation/SubmittingPatches
+++ b/Documentation/SubmittingPatches
@@ -327,6 +327,52 @@
now, but you can do this to mark internal company procedures or just
point out some special detail about the sign-off.
+If you are a subsystem or branch maintainer, sometimes you need to slightly
+modify patches you receive in order to merge them, because the code is not
+exactly the same in your tree and the submitters'. If you stick strictly to
+rule (c), you should ask the submitter to rediff, but this is a totally
+counter-productive waste of time and energy. Rule (b) allows you to adjust
+the code, but then it is very impolite to change one submitter's code and
+make him endorse your bugs. To solve this problem, it is recommended that
+you add a line between the last Signed-off-by header and yours, indicating
+the nature of your changes. While there is nothing mandatory about this, it
+seems like prepending the description with your mail and/or name, all
+enclosed in square brackets, is noticeable enough to make it obvious that
+you are responsible for last-minute changes. Example :
+
+ Signed-off-by: Random J Developer <random@developer.example.org>
+ [lucky@maintainer.example.org: struct foo moved from foo.c to foo.h]
+ Signed-off-by: Lucky K Maintainer <lucky@maintainer.example.org>
+
+This practise is particularly helpful if you maintain a stable branch and
+want at the same time to credit the author, track changes, merge the fix,
+and protect the submitter from complaints. Note that under no circumstances
+can you change the author's identity (the From header), as it is the one
+which appears in the changelog.
+
+Special note to back-porters: It seems to be a common and useful practise
+to insert an indication of the origin of a patch at the top of the commit
+message (just after the subject line) to facilitate tracking. For instance,
+here's what we see in 2.6-stable :
+
+ Date: Tue May 13 19:10:30 2008 +0000
+
+ SCSI: libiscsi regression in 2.6.25: fix nop timer handling
+
+ commit 4cf1043593db6a337f10e006c23c69e5fc93e722 upstream
+
+And here's what appears in 2.4 :
+
+ Date: Tue May 13 22:12:27 2008 +0200
+
+ wireless, airo: waitbusy() won't delay
+
+ [backport of 2.6 commit b7acbdfbd1f277c1eb23f344f899cfa4cd0bf36a]
+
+Whatever the format, this information provides a valuable help to people
+tracking your trees, and to people trying to trouble-shoot bugs in your
+tree.
+
13) When to use Acked-by: and Cc:
diff --git a/Documentation/cciss.txt b/Documentation/cciss.txt
index e65736c..63e59b8 100644
--- a/Documentation/cciss.txt
+++ b/Documentation/cciss.txt
@@ -21,6 +21,11 @@
* SA E200
* SA E200i
* SA E500
+ * SA P212
+ * SA P410
+ * SA P410i
+ * SA P411
+ * SA P812
Detecting drive failures:
-------------------------
diff --git a/Documentation/cgroups.txt b/Documentation/cgroups.txt
index c298a66..824fc02 100644
--- a/Documentation/cgroups.txt
+++ b/Documentation/cgroups.txt
@@ -310,8 +310,8 @@
cd /dev/cgroup
mkdir Charlie
cd Charlie
- /bin/echo 2-3 > cpus
- /bin/echo 1 > mems
+ /bin/echo 2-3 > cpuset.cpus
+ /bin/echo 1 > cpuset.mems
/bin/echo $$ > tasks
sh
# The subshell 'sh' is now running in cgroup Charlie
diff --git a/Documentation/cpu-freq/governors.txt b/Documentation/cpu-freq/governors.txt
index 6a9c55b..dcec056 100644
--- a/Documentation/cpu-freq/governors.txt
+++ b/Documentation/cpu-freq/governors.txt
@@ -129,14 +129,6 @@
intervals the CPU needs to be on average more than 80% in use to then
decide that the CPU frequency needs to be increased.
-sampling_down_factor: this parameter controls the rate that the CPU
-makes a decision on when to decrease the frequency. When set to its
-default value of '5' it means that at 1/5 the sampling_rate the kernel
-makes a decision to lower the frequency. Five "lower rate" decisions
-have to be made in a row before the CPU frequency is actually lower.
-If set to '1' then the frequency decreases as quickly as it increases,
-if set to '2' it decreases at half the rate of the increase.
-
ignore_nice_load: this parameter takes a value of '0' or '1'. When
set to '0' (its default), all processes are counted towards the
'cpu utilisation' value. When set to '1', the processes that are
diff --git a/Documentation/cpusets.txt b/Documentation/cpusets.txt
index fb7b361..d803c5c 100644
--- a/Documentation/cpusets.txt
+++ b/Documentation/cpusets.txt
@@ -199,7 +199,7 @@
The following rules apply to each cpuset:
- Its CPUs and Memory Nodes must be a subset of its parents.
- - It can only be marked exclusive if its parent is.
+ - It can't be marked exclusive unless its parent is.
- If its cpu or memory is exclusive, they may not overlap any sibling.
These rules, and the natural hierarchy of cpusets, enable efficient
@@ -345,7 +345,7 @@
flag, and if set, a call to a new routine cpuset_mem_spread_node()
returns the node to prefer for the allocation.
-Similarly, setting 'memory_spread_cache' turns on the flag
+Similarly, setting 'memory_spread_slab' turns on the flag
PF_SPREAD_SLAB, and appropriately marked slab caches will allocate
pages from the node returned by cpuset_mem_spread_node().
@@ -709,7 +709,10 @@
In this directory you can find several files:
# ls
-cpus cpu_exclusive mems mem_exclusive mem_hardwall tasks
+cpu_exclusive memory_migrate mems tasks
+cpus memory_pressure notify_on_release
+mem_exclusive memory_spread_page sched_load_balance
+mem_hardwall memory_spread_slab sched_relax_domain_level
Reading them will give you information about the state of this cpuset:
the CPUs and Memory Nodes it can use, the processes that are using
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index 3c35d45..5b3f31f 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -289,6 +289,14 @@
---------------------------
+What: old style serial driver for ColdFire (CONFIG_SERIAL_COLDFIRE)
+When: 2.6.28
+Why: This driver still uses the old interface and has been replaced
+ by CONFIG_SERIAL_MCF.
+Who: Sebastian Siewior <sebastian@breakpoint.cc>
+
+---------------------------
+
What: /sys/o2cb symlink
When: January 2010
Why: /sys/fs/o2cb is the proper location for this information - /sys/o2cb
diff --git a/Documentation/filesystems/ext4.txt b/Documentation/filesystems/ext4.txt
index 560f88d..0c5086db 100644
--- a/Documentation/filesystems/ext4.txt
+++ b/Documentation/filesystems/ext4.txt
@@ -139,8 +139,16 @@
Setting it to very large values will improve
performance.
-barrier=1 This enables/disables barriers. barrier=0 disables
- it, barrier=1 enables it.
+barrier=<0|1(*)> This enables/disables the use of write barriers in
+ the jbd code. barrier=0 disables, barrier=1 enables.
+ This also requires an IO stack which can support
+ barriers, and if jbd gets an error on a barrier
+ write, it will disable again with a warning.
+ Write barriers enforce proper on-disk ordering
+ of journal commits, making volatile disk write caches
+ safe to use, at some performance penalty. If
+ your disks are battery-backed in one way or another,
+ disabling barriers may safely improve performance.
orlov (*) This enables the new Orlov block allocator. It is
enabled by default.
diff --git a/Documentation/filesystems/sysfs-pci.txt b/Documentation/filesystems/sysfs-pci.txt
index 5daa2aa..68ef488 100644
--- a/Documentation/filesystems/sysfs-pci.txt
+++ b/Documentation/filesystems/sysfs-pci.txt
@@ -36,6 +36,7 @@
local_cpus nearby CPU mask (cpumask, ro)
resource PCI resource host addresses (ascii, ro)
resource0..N PCI resource N, if present (binary, mmap)
+ resource0_wc..N_wc PCI WC map resource N, if prefetchable (binary, mmap)
rom PCI ROM resource, if present (binary, ro)
subsystem_device PCI subsystem device (ascii, ro)
subsystem_vendor PCI subsystem vendor (ascii, ro)
diff --git a/Documentation/hwmon/adt7473 b/Documentation/hwmon/adt7473
index 22d8b19..2126de3 100644
--- a/Documentation/hwmon/adt7473
+++ b/Documentation/hwmon/adt7473
@@ -69,7 +69,8 @@
The ADT7473 will scale the pwm between the lower and higher pwm speed when
the temperature is between the two temperature boundaries. PWM values range
-from 0 (off) to 255 (full speed).
+from 0 (off) to 255 (full speed). Fan speed will be set to maximum when the
+temperature sensor associated with the PWM control exceeds temp#_max.
Notes
-----
diff --git a/Documentation/hwmon/ibmaem b/Documentation/hwmon/ibmaem
new file mode 100644
index 0000000..2fefaf5
--- /dev/null
+++ b/Documentation/hwmon/ibmaem
@@ -0,0 +1,37 @@
+Kernel driver ibmaem
+======================
+
+Supported systems:
+ * Any recent IBM System X server with Active Energy Manager support.
+ This includes the x3350, x3550, x3650, x3655, x3755, x3850 M2,
+ x3950 M2, and certain HS2x/LS2x/QS2x blades. The IPMI host interface
+ driver ("ipmi-si") needs to be loaded for this driver to do anything.
+ Prefix: 'ibmaem'
+ Datasheet: Not available
+
+Author: Darrick J. Wong
+
+Description
+-----------
+
+This driver implements sensor reading support for the energy and power
+meters available on various IBM System X hardware through the BMC. All
+sensor banks will be exported as platform devices; this driver can talk
+to both v1 and v2 interfaces. This driver is completely separate from the
+older ibmpex driver.
+
+The v1 AEM interface has a simple set of features to monitor energy use.
+There is a register that displays an estimate of raw energy consumption
+since the last BMC reset, and a power sensor that returns average power
+use over a configurable interval.
+
+The v2 AEM interface is a bit more sophisticated, being able to present
+a wider range of energy and power use registers, the power cap as
+set by the AEM software, and temperature sensors.
+
+Special Features
+----------------
+
+The "power_cap" value displays the current system power cap, as set by
+the Active Energy Manager software. Setting the power cap from the host
+is not currently supported.
diff --git a/Documentation/kernel-doc-nano-HOWTO.txt b/Documentation/kernel-doc-nano-HOWTO.txt
index 2075c06..0bd3274 100644
--- a/Documentation/kernel-doc-nano-HOWTO.txt
+++ b/Documentation/kernel-doc-nano-HOWTO.txt
@@ -1,6 +1,105 @@
kernel-doc nano-HOWTO
=====================
+How to format kernel-doc comments
+---------------------------------
+
+In order to provide embedded, 'C' friendly, easy to maintain,
+but consistent and extractable documentation of the functions and
+data structures in the Linux kernel, the Linux kernel has adopted
+a consistent style for documenting functions and their parameters,
+and structures and their members.
+
+The format for this documentation is called the kernel-doc format.
+It is documented in this Documentation/kernel-doc-nano-HOWTO.txt file.
+
+This style embeds the documentation within the source files, using
+a few simple conventions. The scripts/kernel-doc perl script, some
+SGML templates in Documentation/DocBook, and other tools understand
+these conventions, and are used to extract this embedded documentation
+into various documents.
+
+In order to provide good documentation of kernel functions and data
+structures, please use the following conventions to format your
+kernel-doc comments in Linux kernel source.
+
+We definitely need kernel-doc formatted documentation for functions
+that are exported to loadable modules using EXPORT_SYMBOL.
+
+We also look to provide kernel-doc formatted documentation for
+functions externally visible to other kernel files (not marked
+"static").
+
+We also recommend providing kernel-doc formatted documentation
+for private (file "static") routines, for consistency of kernel
+source code layout. But this is lower priority and at the
+discretion of the MAINTAINER of that kernel source file.
+
+Data structures visible in kernel include files should also be
+documented using kernel-doc formatted comments.
+
+The opening comment mark "/**" is reserved for kernel-doc comments.
+Only comments so marked will be considered by the kernel-doc scripts,
+and any comment so marked must be in kernel-doc format. Do not use
+"/**" to be begin a comment block unless the comment block contains
+kernel-doc formatted comments. The closing comment marker for
+kernel-doc comments can be either "*/" or "**/".
+
+Kernel-doc comments should be placed just before the function
+or data structure being described.
+
+Example kernel-doc function comment:
+
+/**
+ * foobar() - short function description of foobar
+ * @arg1: Describe the first argument to foobar.
+ * @arg2: Describe the second argument to foobar.
+ * One can provide multiple line descriptions
+ * for arguments.
+ *
+ * A longer description, with more discussion of the function foobar()
+ * that might be useful to those using or modifying it. Begins with
+ * empty comment line, and may include additional embedded empty
+ * comment lines.
+ *
+ * The longer description can have multiple paragraphs.
+ **/
+
+The first line, with the short description, must be on a single line.
+
+The @argument descriptions must begin on the very next line following
+this opening short function description line, with no intervening
+empty comment lines.
+
+Example kernel-doc data structure comment.
+
+/**
+ * struct blah - the basic blah structure
+ * @mem1: describe the first member of struct blah
+ * @mem2: describe the second member of struct blah,
+ * perhaps with more lines and words.
+ *
+ * Longer description of this structure.
+ **/
+
+The kernel-doc function comments describe each parameter to the
+function, in order, with the @name lines.
+
+The kernel-doc data structure comments describe each structure member
+in the data structure, with the @name lines.
+
+The longer description formatting is "reflowed", losing your line
+breaks. So presenting carefully formatted lists within these
+descriptions won't work so well; derived documentation will lose
+the formatting.
+
+See the section below "How to add extractable documentation to your
+source files" for more details and notes on how to format kernel-doc
+comments.
+
+Components of the kernel-doc system
+-----------------------------------
+
Many places in the source tree have extractable documentation in the
form of block comments above functions. The components of this system
are:
diff --git a/Documentation/kernel-docs.txt b/Documentation/kernel-docs.txt
index 5a4ef48..28cdc2a 100644
--- a/Documentation/kernel-docs.txt
+++ b/Documentation/kernel-docs.txt
@@ -715,14 +715,14 @@
* Name: "Gary's Encyclopedia - The Linux Kernel"
Author: Gary (I suppose...).
- URL: http://www.lisoleg.net/cgi-bin/lisoleg.pl?view=kernel.htm
- Keywords: links, not found here?.
+ URL: http://slencyclopedia.berlios.de/index.html
+ Keywords: linux, community, everything!
Description: Gary's Encyclopedia exists to allow the rapid finding
of documentation and other information of interest to GNU/Linux
users. It has about 4000 links to external pages in 150 major
categories. This link is for kernel-specific links, documents,
- sites... Look there if you could not find here what you were
- looking for.
+ sites... This list is now hosted by developer.Berlios.de,
+ but seems not to have been updated since sometime in 1999.
* Name: "The home page of Linux-MM"
Author: The Linux-MM team.
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index cdd5b93..e07c432 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -398,9 +398,6 @@
cio_ignore= [S390]
See Documentation/s390/CommonIO for details.
- cio_msg= [S390]
- See Documentation/s390/CommonIO for details.
-
clock= [BUGS=X86-32, HW] gettimeofday clocksource override.
[Deprecated]
Forces specified clocksource (if available) to be used
@@ -689,6 +686,12 @@
floppy= [HW]
See Documentation/floppy.txt.
+ force_pal_cache_flush
+ [IA-64] Avoid check_sal_cache_flush which may hang on
+ buggy SAL_CACHE_FLUSH implementations. Using this
+ parameter will force ia64_sal_cache_flush to call
+ ia64_pal_cache_flush instead of SAL_CACHE_FLUSH.
+
gamecon.map[2|3]=
[HW,JOY] Multisystem joystick and NES/SNES/PSX pad
support via parallel port (up to 5 devices per port)
diff --git a/Documentation/kobject.txt b/Documentation/kobject.txt
index bf3256e..51a8021 100644
--- a/Documentation/kobject.txt
+++ b/Documentation/kobject.txt
@@ -305,7 +305,7 @@
A kset keeps its children in a standard kernel linked list. Kobjects point
back to their containing kset via their kset field. In almost all cases,
-the kobjects belonging to a ket have that kset (or, strictly, its embedded
+the kobjects belonging to a kset have that kset (or, strictly, its embedded
kobject) in their parent.
As a kset contains a kobject within it, it should always be dynamically
diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt
index 01c6c3d..64b3f14 100644
--- a/Documentation/laptops/thinkpad-acpi.txt
+++ b/Documentation/laptops/thinkpad-acpi.txt
@@ -503,7 +503,7 @@
In addition to the EV_KEY events, thinkpad-acpi may also issue EV_SW
events for switches:
-SW_RADIO T60 and later hardare rfkill rocker switch
+SW_RFKILL_ALL T60 and later hardare rfkill rocker switch
SW_TABLET_MODE Tablet ThinkPads HKEY events 0x5009 and 0x500A
Non hot-key ACPI HKEY event map:
diff --git a/Documentation/lguest/lguest.c b/Documentation/lguest/lguest.c
index 3be8ab2..82fafe0 100644
--- a/Documentation/lguest/lguest.c
+++ b/Documentation/lguest/lguest.c
@@ -157,6 +157,9 @@
/* The routine to call when the Guest pings us. */
void (*handle_output)(int fd, struct virtqueue *me);
+
+ /* Outstanding buffers */
+ unsigned int inflight;
};
/* Remember the arguments to the program so we can "reboot" */
@@ -702,6 +705,7 @@
errx(1, "Looped descriptor");
} while ((i = next_desc(vq, i)) != vq->vring.num);
+ vq->inflight++;
return head;
}
@@ -719,6 +723,7 @@
/* Make sure buffer is written before we update index. */
wmb();
vq->vring.used->idx++;
+ vq->inflight--;
}
/* This actually sends the interrupt for this virtqueue */
@@ -726,8 +731,9 @@
{
unsigned long buf[] = { LHREQ_IRQ, vq->config.irq };
- /* If they don't want an interrupt, don't send one. */
- if (vq->vring.avail->flags & VRING_AVAIL_F_NO_INTERRUPT)
+ /* If they don't want an interrupt, don't send one, unless empty. */
+ if ((vq->vring.avail->flags & VRING_AVAIL_F_NO_INTERRUPT)
+ && vq->inflight)
return;
/* Send the Guest an interrupt tell them we used something up. */
@@ -1107,6 +1113,7 @@
vq->next = NULL;
vq->last_avail_idx = 0;
vq->dev = dev;
+ vq->inflight = 0;
/* Initialize the configuration. */
vq->config.num = num_descs;
@@ -1368,6 +1375,7 @@
/* Tell Guest what MAC address to use. */
add_feature(dev, VIRTIO_NET_F_MAC);
+ add_feature(dev, VIRTIO_F_NOTIFY_ON_EMPTY);
set_config(dev, sizeof(conf), &conf);
/* We don't need the socket any more; setup is done. */
diff --git a/Documentation/memory-barriers.txt b/Documentation/memory-barriers.txt
index e5a819a..f5b7127 100644
--- a/Documentation/memory-barriers.txt
+++ b/Documentation/memory-barriers.txt
@@ -994,7 +994,17 @@
DATA DEPENDENCY read_barrier_depends() smp_read_barrier_depends()
-All CPU memory barriers unconditionally imply compiler barriers.
+All memory barriers except the data dependency barriers imply a compiler
+barrier. Data dependencies do not impose any additional compiler ordering.
+
+Aside: In the case of data dependencies, the compiler would be expected to
+issue the loads in the correct order (eg. `a[b]` would have to load the value
+of b before loading a[b]), however there is no guarantee in the C specification
+that the compiler may not speculate the value of b (eg. is equal to 1) and load
+a before b (eg. tmp = a[1]; if (b != 1) tmp = a[b]; ). There is also the
+problem of a compiler reloading b after having loaded a[b], thus having a newer
+copy of b than a[b]. A consensus has not yet been reached about these problems,
+however the ACCESS_ONCE macro is a good place to start looking.
SMP memory barriers are reduced to compiler barriers on uniprocessor compiled
systems because it is assumed that a CPU will appear to be self-consistent,
diff --git a/Documentation/networking/arcnet.txt b/Documentation/networking/arcnet.txt
index 770fc41..7960125 100644
--- a/Documentation/networking/arcnet.txt
+++ b/Documentation/networking/arcnet.txt
@@ -46,7 +46,7 @@
This new release (2.91) has been put together by David Woodhouse
-<dwmw2@cam.ac.uk>, in an attempt to tidy up the driver after adding support
+<dwmw2@infradead.org>, in an attempt to tidy up the driver after adding support
for yet another chipset. Now the generic support has been separated from the
individual chipset drivers, and the source files aren't quite so packed with
#ifdefs! I've changed this file a bit, but kept it in the first person from
diff --git a/Documentation/networking/bridge.txt b/Documentation/networking/bridge.txt
index bdae2db..bec69a8 100644
--- a/Documentation/networking/bridge.txt
+++ b/Documentation/networking/bridge.txt
@@ -1,6 +1,6 @@
In order to use the Ethernet bridging functionality, you'll need the
userspace tools. These programs and documentation are available
-at http://bridge.sourceforge.net. The download page is
+at http://www.linux-foundation.org/en/Net:Bridge. The download page is
http://prdownloads.sourceforge.net/bridge.
If you still have questions, don't hesitate to post to the mailing list
diff --git a/Documentation/video4linux/CARDLIST.cx23885 b/Documentation/video4linux/CARDLIST.cx23885
index 929b90c..191194e 100644
--- a/Documentation/video4linux/CARDLIST.cx23885
+++ b/Documentation/video4linux/CARDLIST.cx23885
@@ -5,6 +5,6 @@
4 -> DViCO FusionHDTV5 Express [18ac:d500]
5 -> Hauppauge WinTV-HVR1500Q [0070:7790,0070:7797]
6 -> Hauppauge WinTV-HVR1500 [0070:7710,0070:7717]
- 7 -> Hauppauge WinTV-HVR1200 [0070:71d1]
+ 7 -> Hauppauge WinTV-HVR1200 [0070:71d1,0070:71d3]
8 -> Hauppauge WinTV-HVR1700 [0070:8101]
9 -> Hauppauge WinTV-HVR1400 [0070:8010]
diff --git a/Documentation/video4linux/CARDLIST.cx88 b/Documentation/video4linux/CARDLIST.cx88
index 5439573..7cf5685 100644
--- a/Documentation/video4linux/CARDLIST.cx88
+++ b/Documentation/video4linux/CARDLIST.cx88
@@ -60,7 +60,7 @@
59 -> DViCO FusionHDTV 5 PCI nano [18ac:d530]
60 -> Pinnacle Hybrid PCTV [12ab:1788]
61 -> Winfast TV2000 XP Global [107d:6f18]
- 62 -> PowerColor Real Angel 330 [14f1:ea3d]
+ 62 -> PowerColor RA330 [14f1:ea3d]
63 -> Geniatech X8000-MT DVBT [14f1:8852]
64 -> DViCO FusionHDTV DVB-T PRO [18ac:db30]
65 -> DViCO FusionHDTV 7 Gold [18ac:d610]
diff --git a/Documentation/video4linux/CARDLIST.em28xx b/Documentation/video4linux/CARDLIST.em28xx
index f40e092..1d6a245 100644
--- a/Documentation/video4linux/CARDLIST.em28xx
+++ b/Documentation/video4linux/CARDLIST.em28xx
@@ -14,4 +14,4 @@
13 -> Terratec Prodigy XS (em2880) [0ccd:0047]
14 -> Pixelview Prolink PlayTV USB 2.0 (em2820/em2840)
15 -> V-Gear PocketTV (em2800)
- 16 -> Hauppauge WinTV HVR 950 (em2880) [2040:6513]
+ 16 -> Hauppauge WinTV HVR 950 (em2880) [2040:6513,2040:6517,2040:651b,2040:651f]
diff --git a/Documentation/video4linux/cx18.txt b/Documentation/video4linux/cx18.txt
index 077d56e..6842c26 100644
--- a/Documentation/video4linux/cx18.txt
+++ b/Documentation/video4linux/cx18.txt
@@ -1,7 +1,9 @@
Some notes regarding the cx18 driver for the Conexant CX23418 MPEG
encoder chip:
-1) The only hardware currently supported is the Hauppauge HVR-1600.
+1) The only hardware currently supported is the Hauppauge HVR-1600
+ card and the Compro VideoMate H900 (note that this card only
+ supports analog input, it has no digital tuner!).
2) Some people have problems getting the i2c bus to work. Cause unknown.
The symptom is that the eeprom cannot be read and the card is
diff --git a/Documentation/vm/pagemap.txt b/Documentation/vm/pagemap.txt
new file mode 100644
index 0000000..ce72c0f
--- /dev/null
+++ b/Documentation/vm/pagemap.txt
@@ -0,0 +1,77 @@
+pagemap, from the userspace perspective
+---------------------------------------
+
+pagemap is a new (as of 2.6.25) set of interfaces in the kernel that allow
+userspace programs to examine the page tables and related information by
+reading files in /proc.
+
+There are three components to pagemap:
+
+ * /proc/pid/pagemap. This file lets a userspace process find out which
+ physical frame each virtual page is mapped to. It contains one 64-bit
+ value for each virtual page, containing the following data (from
+ fs/proc/task_mmu.c, above pagemap_read):
+
+ * Bits 0-55 page frame number (PFN) if present
+ * Bits 0-4 swap type if swapped
+ * Bits 5-55 swap offset if swapped
+ * Bits 55-60 page shift (page size = 1<<page shift)
+ * Bit 61 reserved for future use
+ * Bit 62 page swapped
+ * Bit 63 page present
+
+ If the page is not present but in swap, then the PFN contains an
+ encoding of the swap file number and the page's offset into the
+ swap. Unmapped pages return a null PFN. This allows determining
+ precisely which pages are mapped (or in swap) and comparing mapped
+ pages between processes.
+
+ Efficient users of this interface will use /proc/pid/maps to
+ determine which areas of memory are actually mapped and llseek to
+ skip over unmapped regions.
+
+ * /proc/kpagecount. This file contains a 64-bit count of the number of
+ times each page is mapped, indexed by PFN.
+
+ * /proc/kpageflags. This file contains a 64-bit set of flags for each
+ page, indexed by PFN.
+
+ The flags are (from fs/proc/proc_misc, above kpageflags_read):
+
+ 0. LOCKED
+ 1. ERROR
+ 2. REFERENCED
+ 3. UPTODATE
+ 4. DIRTY
+ 5. LRU
+ 6. ACTIVE
+ 7. SLAB
+ 8. WRITEBACK
+ 9. RECLAIM
+ 10. BUDDY
+
+Using pagemap to do something useful:
+
+The general procedure for using pagemap to find out about a process' memory
+usage goes like this:
+
+ 1. Read /proc/pid/maps to determine which parts of the memory space are
+ mapped to what.
+ 2. Select the maps you are interested in -- all of them, or a particular
+ library, or the stack or the heap, etc.
+ 3. Open /proc/pid/pagemap and seek to the pages you would like to examine.
+ 4. Read a u64 for each page from pagemap.
+ 5. Open /proc/kpagecount and/or /proc/kpageflags. For each PFN you just
+ read, seek to that entry in the file, and read the data you want.
+
+For example, to find the "unique set size" (USS), which is the amount of
+memory that a process is using that is not shared with any other process,
+you can go through every map in the process, find the PFNs, look those up
+in kpagecount, and tally up the number of pages that are only referenced
+once.
+
+Other notes:
+
+Reading from any of the files will return -EINVAL if you are not starting
+the read on an 8-byte boundary (e.g., if you seeked an odd number of bytes
+into the file), or if the size of the read is not a multiple of 8 bytes.
diff --git a/Kbuild b/Kbuild
index 32f19c5..e750e9c 100644
--- a/Kbuild
+++ b/Kbuild
@@ -96,5 +96,4 @@
$(call cmd,syscalls)
# Delete all targets during make clean
-clean-files := $(addprefix $(objtree)/,$(targets))
-
+clean-files := $(addprefix $(objtree)/,$(filter-out $(bounds-file) $(offsets-file),$(targets)))
diff --git a/MAINTAINERS b/MAINTAINERS
index f5583dc..cd587ee 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -228,21 +228,21 @@
P: Alexey Starikovskiy
M: astarikovskiy@suse.de
L: linux-acpi@vger.kernel.org
-W: http://acpi.sourceforge.net/
+W: http://www.lesswatts.org/projects/acpi/
S: Supported
ACPI EC DRIVER
P: Alexey Starikovskiy
M: astarikovskiy@suse.de
L: linux-acpi@vger.kernel.org
-W: http://acpi.sourceforge.net/
+W: http://www.lesswatts.org/projects/acpi/
S: Supported
ACPI FAN DRIVER
P: Len Brown
M: len.brown@intel.com
L: linux-acpi@vger.kernel.org
-W: http://acpi.sourceforge.net/
+W: http://www.lesswatts.org/projects/acpi/
S: Supported
ACPI PCI HOTPLUG DRIVER
@@ -255,14 +255,14 @@
P: Len Brown
M: len.brown@intel.com
L: linux-acpi@vger.kernel.org
-W: http://acpi.sourceforge.net/
+W: http://www.lesswatts.org/projects/acpi/
S: Supported
ACPI VIDEO DRIVER
P: Rui Zhang
M: rui.zhang@intel.com
L: linux-acpi@vger.kernel.org
-W: http://acpi.sourceforge.net/
+W: http://www.lesswatts.org/projects/acpi/
S: Supported
ACPI WMI DRIVER
@@ -274,7 +274,7 @@
AD1889 ALSA SOUND DRIVER
P: Kyle McMartin
-M: kyle@parisc-linux.org
+M: kyle@mcmartin.ca
P: Thibaut Varene
M: T-Bone@parisc-linux.org
W: http://wiki.parisc-linux.org/AD1889
@@ -367,12 +367,12 @@
AMD GEODE CS5536 USB DEVICE CONTROLLER DRIVER
P: Thomas Dahlmann
M: thomas.dahlmann@amd.com
-L: info-linux@geode.amd.com (subscribers-only)
+L: linux-geode@lists.infradead.org (moderated for non-subscribers)
S: Supported
AMD GEODE PROCESSOR/CHIPSET SUPPORT
P: Jordan Crouse
-L: info-linux@geode.amd.com (subscribers-only)
+L: linux-geode@lists.infradead.org (moderated for non-subscribers)
W: http://www.amd.com/us-en/ConnectivitySolutions/TechnicalResources/0,,50_2334_2452_11363,00.html
S: Supported
@@ -982,13 +982,6 @@
W: http://sourceforge.net/projects/bonding/
S: Supported
-BROADBAND PROCESSOR ARCHITECTURE
-P: Arnd Bergmann
-M: arnd@arndb.de
-L: linuxppc-dev@ozlabs.org
-W: http://www.penguinppc.org/ppc64/
-S: Supported
-
BROADCOM B44 10/100 ETHERNET DRIVER
P: Gary Zambrano
M: zambrano@broadcom.com
@@ -1002,8 +995,8 @@
S: Supported
BROADCOM BNX2X 10 GIGABIT ETHERNET DRIVER
-P: Eliezer Tamir
-M: eliezert@broadcom.com
+P: Eilon Greenstein
+M: eilong@broadcom.com
L: netdev@vger.kernel.org
S: Supported
@@ -1052,6 +1045,14 @@
L: discuss@x86-64.org
S: Maintained
+CELL BROADBAND ENGINE ARCHITECTURE
+P: Arnd Bergmann
+M: arnd@arndb.de
+L: linuxppc-dev@ozlabs.org
+L: cbe-oss-dev@ozlabs.org
+W: http://www.ibm.com/developerworks/power/cell/
+S: Supported
+
CFAG12864B LCD DRIVER
P: Miguel Ojeda Sandonis
M: maxextreme@gmail.com
@@ -1201,6 +1202,7 @@
M: menage@google.com
L: linux-kernel@vger.kernel.org
W: http://www.bullopensource.org/cpuset/
+W: http://oss.sgi.com/projects/cpusets/
S: Supported
CRAMFS FILESYSTEM
@@ -1230,6 +1232,29 @@
M: jayakumar.alsa@gmail.com
S: Maintained
+CX18 VIDEO4LINUX DRIVER
+P: Hans Verkuil, Andy Walls
+M: hverkuil@xs4all.nl, awalls@radix.net
+L: ivtv-devel@ivtvdriver.org
+L: ivtv-users@ivtvdriver.org
+L: video4linux-list@redhat.com
+W: http://linuxtv.org
+S: Maintained
+
+CXGB3 ETHERNET DRIVER (CXGB3)
+P: Divy Le Ray
+M: divy@chelsio.com
+L: netdev@vger.kernel.org
+W: http://www.chelsio.com
+S: Supported
+
+CXGB3 IWARP RNIC DRIVER (IW_CXGB3)
+P: Steve Wise
+M: swise@chelsio.com
+L: general@lists.openfabrics.org
+W: http://www.openfabrics.org
+S: Supported
+
CYBERPRO FB DRIVER
P: Russell King
M: rmk@arm.linux.org.uk
@@ -1587,7 +1612,7 @@
P: Stephen Hemminger
M: shemminger@linux-foundation.org
L: bridge@lists.linux-foundation.org
-W: http://bridge.sourceforge.net/
+W: http://www.linux-foundation.org/en/Net:Bridge
S: Maintained
ETHERTEAM 16I DRIVER
@@ -1636,8 +1661,10 @@
S: Maintained
FREESCALE DMA DRIVER
-P; Zhang Wei
-M: wei.zhang@freescale.com
+P: Li Yang
+M: leoli@freescale.com
+P: Zhang Wei
+M: zw@zh-kernel.org
L: linuxppc-embedded@ozlabs.org
L: linux-kernel@vger.kernel.org
S: Maintained
@@ -1801,7 +1828,7 @@
HARMONY SOUND DRIVER
P: Kyle McMartin
-M: kyle@parisc-linux.org
+M: kyle@mcmartin.ca
L: linux-parisc@vger.kernel.org
S: Maintained
@@ -1931,8 +1958,10 @@
S: Maintained
I2C SUBSYSTEM
-P: Jean Delvare
+P: Jean Delvare (PC drivers, core)
M: khali@linux-fr.org
+P: Ben Dooks (embedded platforms)
+M: ben-linux@fluff.org
L: i2c@lm-sensors.org
T: quilt http://khali.linux-fr.org/devel/linux-2.6/jdelvare-i2c/
S: Maintained
@@ -2318,7 +2347,8 @@
KERNEL BUILD (kbuild: Makefile, scripts/Makefile.*)
P: Sam Ravnborg
M: sam@ravnborg.org
-T: git kernel.org:/pub/scm/linux/kernel/git/sam/kbuild.git
+T: git kernel.org:/pub/scm/linux/kernel/git/sam/kbuild-next.git
+T: git kernel.org:/pub/scm/linux/kernel/git/sam/kbuild-fixes.git
L: linux-kbuild@vger.kernel.org
S: Maintained
@@ -2340,24 +2370,24 @@
KERNEL VIRTUAL MACHINE (KVM)
P: Avi Kivity
M: avi@qumranet.com
-L: kvm-devel@lists.sourceforge.net
-W: kvm.sourceforge.net
+L: kvm@vger.kernel.org
+W: http://kvm.qumranet.com
S: Supported
KERNEL VIRTUAL MACHINE (KVM) FOR POWERPC
P: Hollis Blanchard
M: hollisb@us.ibm.com
-L: kvm-ppc-devel@lists.sourceforge.net
-W: kvm.sourceforge.net
+L: kvm-ppc@vger.kernel.org
+W: http://kvm.qumranet.com
S: Supported
-KERNEL VIRTUAL MACHINE For Itanium(KVM/IA64)
+KERNEL VIRTUAL MACHINE For Itanium (KVM/IA64)
P: Anthony Xu
M: anthony.xu@intel.com
P: Xiantao Zhang
M: xiantao.zhang@intel.com
-L: kvm-ia64-devel@lists.sourceforge.net
-W: kvm.sourceforge.net
+L: kvm-ia64@vger.kernel.org
+W: http://kvm.qumranet.com
S: Supported
KERNEL VIRTUAL MACHINE for s390 (KVM/s390)
@@ -2536,7 +2566,6 @@
P: Chris Wright
M: chrisw@sous-sol.org
L: linux-security-module@vger.kernel.org
-W: http://lsm.immunix.org
T: git kernel.org:/pub/scm/linux/kernel/git/chrisw/lsm-2.6.git
S: Supported
@@ -2808,6 +2837,15 @@
L: linux-kernel@vger.kernel.org
S: Maintained
+MYRICOM MYRI-10G 10GbE DRIVER (MYRI10GE)
+P: Andrew Gallatin
+M: gallatin@myri.com
+P: Brice Goglin
+M: brice@myri.com
+L: netdev@vger.kernel.org
+W: http://www.myri.com/scs/download-Myri10GE.html
+S: Supported
+
NATSEMI ETHERNET DRIVER (DP8381x)
P: Tim Hockin
M: thockin@hockin.org
@@ -2828,8 +2866,8 @@
NETEFFECT IWARP RNIC DRIVER (IW_NES)
P: Faisal Latif
M: flatif@neteffect.com
-P: Nishi Gupta
-M: ngupta@neteffect.com
+P: Chien Tung
+M: ctung@neteffect.com
P: Glenn Streiff
M: gstreiff@neteffect.com
L: general@lists.openfabrics.org
@@ -3083,7 +3121,7 @@
PARISC ARCHITECTURE
P: Kyle McMartin
-M: kyle@parisc-linux.org
+M: kyle@mcmartin.ca
P: Matthew Wilcox
M: matthew@wil.cx
P: Grant Grundler
@@ -3121,7 +3159,7 @@
P: Linas Vepstas
M: linas@austin.ibm.com
L: linux-kernel@vger.kernel.org
-L: linux-pci@atrey.karlin.mff.cuni.cz
+L: linux-pci@vger.kernel.org
S: Supported
PCI SUBSYSTEM
@@ -3227,7 +3265,7 @@
PPP OVER ETHERNET
P: Michal Ostrowski
-M: mostrows@speakeasy.net
+M: mostrows@earthlink.net
S: Maintained
PPP OVER L2TP
@@ -3292,9 +3330,11 @@
W: http://www.isely.net/pvrusb2/
S: Maintained
-PXA2xx SUPPORT
-P: Nicolas Pitre
-M: nico@cam.org
+PXA2xx/PXA3xx SUPPORT
+P: Eric Miao
+M: eric.miao@marvell.com
+P: Russell King
+M: linux@arm.linux.org.uk
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
@@ -3401,10 +3441,7 @@
S: Maintained
REISERFS FILE SYSTEM
-P: Hans Reiser
-M: reiserfs-dev@namesys.com
L: reiserfs-devel@vger.kernel.org
-W: http://www.namesys.com
S: Supported
RFKILL
@@ -3624,13 +3661,6 @@
L: netdev@vger.kernel.org
S: Maintained
-SIS 5513 IDE CONTROLLER DRIVER
-P: Lionel Bouton
-M: Lionel.Bouton@inet6.fr
-W: http://inet6.dyn.dhs.org/sponsoring/sis5513/index.html
-W: http://gyver.homeip.net/sis5513/index.html
-S: Maintained
-
SIS 900/7016 FAST ETHERNET DRIVER
P: Daniele Venzano
M: venza@brownhat.org
@@ -3755,6 +3785,14 @@
L: spi-devel-general@lists.sourceforge.net
S: Maintained
+SPU FILE SYSTEM
+P: Jeremy Kerr
+M: jk@ozlabs.org
+L: linuxppc-dev@ozlabs.org
+L: cbe-oss-dev@ozlabs.org
+W: http://www.ibm.com/developerworks/power/cell/
+S: Supported
+
STABLE BRANCH:
P: Greg Kroah-Hartman
M: greg@kroah.com
@@ -3988,7 +4026,7 @@
P: Grant Grundler
M: grundler@parisc-linux.org
P: Kyle McMartin
-M: kyle@parisc-linux.org
+M: kyle@mcmartin.ca
L: netdev@vger.kernel.org
S: Maintained
@@ -4010,12 +4048,41 @@
L: linux-scsi@vger.kernel.org
S: Maintained
+UCLINUX (AND M68KNOMMU)
+P: Greg Ungerer
+M: gerg@uclinux.org
+W: http://www.uclinux.org/
+L: uclinux-dev@uclinux.org (subscribers-only)
+S: Maintained
+
+UCLINUX FOR NEC V850
+P: Miles Bader
+
+UCLINUX FOR RENESAS H8/300
+P: Yoshinori Sato
+M: ysato@users.sourceforge.jp
+W: http://uclinux-h8.sourceforge.jp/
+S: Supported
+
UDF FILESYSTEM
P: Jan Kara
M: jack@suse.cz
W: http://linux-udf.sourceforge.net
S: Maintained
+UFS FILESYSTEM
+P: Evgeniy Dushistov
+M: dushistov@mail.ru
+L: linux-kernel@vger.kernel.org
+S: Maintained
+
+UltraSPARC (sparc64):
+P: David S. Miller
+M: davem@davemloft.net
+L: sparclinux@vger.kernel.org
+T: git kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6.git
+S: Maintained
+
UNIFORM CDROM DRIVER
P: Jens Axboe
M: axboe@kernel.dk
@@ -4062,6 +4129,13 @@
W: http://www.linux-usb.org/usbnet
S: Maintained
+USB DIAMOND RIO500 DRIVER
+P: Cesar Miquel
+M: miquel@df.uba.ar
+L: rio500-users@lists.sourceforge.net
+W: http://rio500.sourceforge.net
+S: Maintained
+
USB EHCI DRIVER
P: David Brownell
M: dbrownell@users.sourceforge.net
@@ -4293,6 +4367,14 @@
L: linux-kernel@vger.kernel.org
S: Maintained
+UTIL-LINUX-NG PACKAGE
+P: Karel Zak
+M: kzak@redhat.com
+L: util-linux-ng@vger.kernel.org
+W: http://kernel.org/~kzak/util-linux-ng/
+T: git://git.kernel.org/pub/scm/utils/util-linux-ng/util-linux-ng.git
+S: Maintained
+
VFAT/FAT/MSDOS FILESYSTEM:
P: OGAWA Hirofumi
M: hirofumi@mail.parknet.co.jp
@@ -4316,42 +4398,6 @@
L: netdev@vger.kernel.org
S: Maintained
-UCLINUX (AND M68KNOMMU)
-P: Greg Ungerer
-M: gerg@uclinux.org
-W: http://www.uclinux.org/
-L: uclinux-dev@uclinux.org (subscribers-only)
-S: Maintained
-
-UCLINUX FOR NEC V850
-P: Miles Bader
-
-UCLINUX FOR RENESAS H8/300
-P: Yoshinori Sato
-M: ysato@users.sourceforge.jp
-W: http://uclinux-h8.sourceforge.jp/
-S: Supported
-
-UFS FILESYSTEM
-P: Evgeniy Dushistov
-M: dushistov@mail.ru
-L: linux-kernel@vger.kernel.org
-S: Maintained
-
-UltraSPARC (sparc64):
-P: David S. Miller
-M: davem@davemloft.net
-L: sparclinux@vger.kernel.org
-T: git kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6.git
-S: Maintained
-
-USB DIAMOND RIO500 DRIVER
-P: Cesar Miquel
-M: miquel@df.uba.ar
-L: rio500-users@lists.sourceforge.net
-W: http://rio500.sourceforge.net
-S: Maintained
-
VIDEO FOR LINUX
P: Mauro Carvalho Chehab
M: mchehab@infradead.org
diff --git a/Makefile b/Makefile
index 3140145..6923d66 100644
--- a/Makefile
+++ b/Makefile
@@ -1,8 +1,8 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 26
-EXTRAVERSION = -rc2
-NAME = Funky Weasel is Jiggy wit it
+EXTRAVERSION = -rc6
+NAME = Rotary Wombat
# *DOCUMENTATION*
# To see a list of typical targets execute "make help"
@@ -1114,6 +1114,7 @@
MRPROPER_FILES += .config .config.old include/asm .version .old_version \
include/linux/autoconf.h include/linux/version.h \
include/linux/utsrelease.h \
+ include/linux/bounds.h include/asm*/asm-offsets.h \
Module.symvers tags TAGS cscope*
# clean - Delete most, but leave enough to build external modules
@@ -1431,7 +1432,7 @@
elif $1 --version 2>&1 | grep -iq emacs; then \
$(all-sources) | xargs $1 -a; \
$(all-kconfigs) | xargs $1 -a \
- --regex='/^[ \t]*(menu|)config[ \t]+\([a-zA-Z0-9_]+\)/\2/'; \
+ --regex='/^[ \t]*\(\(menu\)*config\)[ \t]+\([a-zA-Z0-9_]+\)/\3/'; \
$(all-defconfigs) | xargs -r $1 -a \
--regex='/^#?[ \t]?\(CONFIG_[a-zA-Z0-9_]+\)/\1/'; \
else \
diff --git a/arch/alpha/kernel/init_task.c b/arch/alpha/kernel/init_task.c
index 835d09a..1f76218 100644
--- a/arch/alpha/kernel/init_task.c
+++ b/arch/alpha/kernel/init_task.c
@@ -9,7 +9,6 @@
static struct fs_struct init_fs = INIT_FS;
-static struct files_struct init_files = INIT_FILES;
static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
struct mm_struct init_mm = INIT_MM(init_mm);
diff --git a/arch/arm/boot/compressed/head-xscale.S b/arch/arm/boot/compressed/head-xscale.S
index 67ea99e..dd3fbd6 100644
--- a/arch/arm/boot/compressed/head-xscale.S
+++ b/arch/arm/boot/compressed/head-xscale.S
@@ -33,10 +33,6 @@
bic r0, r0, #0x1000 @ clear Icache
mcr p15, 0, r0, c1, c0, 0
-#ifdef CONFIG_ARCH_COTULLA_IDP
- mov r7, #MACH_TYPE_COTULLA_IDP
-#endif
-
#ifdef CONFIG_ARCH_IXP2000
mov r1, #-1
mov r0, #0xd6000000
diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c
index ae21755..d973c98 100644
--- a/arch/arm/common/locomo.c
+++ b/arch/arm/common/locomo.c
@@ -321,11 +321,42 @@
locomo_writel(r, mapbase + LOCOMO_GIE);
}
+static int GPIO_IRQ_rising_edge;
+static int GPIO_IRQ_falling_edge;
+
+static int locomo_gpio_type(unsigned int irq, unsigned int type)
+{
+ unsigned int mask;
+ void __iomem *mapbase = get_irq_chip_data(irq);
+
+ mask = 1 << (irq - LOCOMO_IRQ_GPIO_START);
+
+ if (type == IRQT_PROBE) {
+ if ((GPIO_IRQ_rising_edge | GPIO_IRQ_falling_edge) & mask)
+ return 0;
+ type = __IRQT_RISEDGE | __IRQT_FALEDGE;
+ }
+
+ if (type & __IRQT_RISEDGE)
+ GPIO_IRQ_rising_edge |= mask;
+ else
+ GPIO_IRQ_rising_edge &= ~mask;
+ if (type & __IRQT_FALEDGE)
+ GPIO_IRQ_falling_edge |= mask;
+ else
+ GPIO_IRQ_falling_edge &= ~mask;
+ locomo_writel(GPIO_IRQ_rising_edge, mapbase + LOCOMO_GRIE);
+ locomo_writel(GPIO_IRQ_falling_edge, mapbase + LOCOMO_GFIE);
+
+ return 0;
+}
+
static struct irq_chip locomo_gpio_chip = {
- .name = "LOCOMO-gpio",
- .ack = locomo_gpio_ack_irq,
- .mask = locomo_gpio_mask_irq,
- .unmask = locomo_gpio_unmask_irq,
+ .name = "LOCOMO-gpio",
+ .ack = locomo_gpio_ack_irq,
+ .mask = locomo_gpio_mask_irq,
+ .unmask = locomo_gpio_unmask_irq,
+ .set_type = locomo_gpio_type,
};
static void locomo_lt_handler(unsigned int irq, struct irq_desc *desc)
@@ -450,22 +481,18 @@
set_irq_chip(IRQ_LOCOMO_KEY_BASE, &locomo_chip);
set_irq_chip_data(IRQ_LOCOMO_KEY_BASE, irqbase);
set_irq_chained_handler(IRQ_LOCOMO_KEY_BASE, locomo_key_handler);
- set_irq_flags(IRQ_LOCOMO_KEY_BASE, IRQF_VALID | IRQF_PROBE);
set_irq_chip(IRQ_LOCOMO_GPIO_BASE, &locomo_chip);
set_irq_chip_data(IRQ_LOCOMO_GPIO_BASE, irqbase);
set_irq_chained_handler(IRQ_LOCOMO_GPIO_BASE, locomo_gpio_handler);
- set_irq_flags(IRQ_LOCOMO_GPIO_BASE, IRQF_VALID | IRQF_PROBE);
set_irq_chip(IRQ_LOCOMO_LT_BASE, &locomo_chip);
set_irq_chip_data(IRQ_LOCOMO_LT_BASE, irqbase);
set_irq_chained_handler(IRQ_LOCOMO_LT_BASE, locomo_lt_handler);
- set_irq_flags(IRQ_LOCOMO_LT_BASE, IRQF_VALID | IRQF_PROBE);
set_irq_chip(IRQ_LOCOMO_SPI_BASE, &locomo_chip);
set_irq_chip_data(IRQ_LOCOMO_SPI_BASE, irqbase);
set_irq_chained_handler(IRQ_LOCOMO_SPI_BASE, locomo_spi_handler);
- set_irq_flags(IRQ_LOCOMO_SPI_BASE, IRQF_VALID | IRQF_PROBE);
/* install handlers for IRQ_LOCOMO_KEY_BASE generated interrupts */
set_irq_chip(LOCOMO_IRQ_KEY_START, &locomo_key_chip);
@@ -488,7 +515,7 @@
set_irq_flags(LOCOMO_IRQ_LT_START, IRQF_VALID | IRQF_PROBE);
/* install handlers for IRQ_LOCOMO_SPI_BASE generated interrupts */
- for (irq = LOCOMO_IRQ_SPI_START; irq < LOCOMO_IRQ_SPI_START + 3; irq++) {
+ for (irq = LOCOMO_IRQ_SPI_START; irq < LOCOMO_IRQ_SPI_START + 4; irq++) {
set_irq_chip(irq, &locomo_spi_chip);
set_irq_chip_data(irq, irqbase);
set_irq_handler(irq, handle_edge_irq);
@@ -574,20 +601,20 @@
save->LCM_GPO = locomo_readl(lchip->base + LOCOMO_GPO); /* GPIO */
locomo_writel(0x00, lchip->base + LOCOMO_GPO);
- save->LCM_SPICT = locomo_readl(lchip->base + LOCOMO_SPICT); /* SPI */
+ save->LCM_SPICT = locomo_readl(lchip->base + LOCOMO_SPI + LOCOMO_SPICT); /* SPI */
locomo_writel(0x40, lchip->base + LOCOMO_SPICT);
save->LCM_GPE = locomo_readl(lchip->base + LOCOMO_GPE); /* GPIO */
locomo_writel(0x00, lchip->base + LOCOMO_GPE);
save->LCM_ASD = locomo_readl(lchip->base + LOCOMO_ASD); /* ADSTART */
locomo_writel(0x00, lchip->base + LOCOMO_ASD);
- save->LCM_SPIMD = locomo_readl(lchip->base + LOCOMO_SPIMD); /* SPI */
- locomo_writel(0x3C14, lchip->base + LOCOMO_SPIMD);
+ save->LCM_SPIMD = locomo_readl(lchip->base + LOCOMO_SPI + LOCOMO_SPIMD); /* SPI */
+ locomo_writel(0x3C14, lchip->base + LOCOMO_SPI + LOCOMO_SPIMD);
locomo_writel(0x00, lchip->base + LOCOMO_PAIF);
locomo_writel(0x00, lchip->base + LOCOMO_DAC);
locomo_writel(0x00, lchip->base + LOCOMO_BACKLIGHT + LOCOMO_TC);
- if ( (locomo_readl(lchip->base + LOCOMO_LED + LOCOMO_LPT0) & 0x88) && (locomo_readl(lchip->base + LOCOMO_LED + LOCOMO_LPT1) & 0x88) )
+ if ((locomo_readl(lchip->base + LOCOMO_LED + LOCOMO_LPT0) & 0x88) && (locomo_readl(lchip->base + LOCOMO_LED + LOCOMO_LPT1) & 0x88))
locomo_writel(0x00, lchip->base + LOCOMO_C32K); /* CLK32 off */
else
/* 18MHz already enabled, so no wait */
@@ -616,10 +643,10 @@
spin_lock_irqsave(&lchip->lock, flags);
locomo_writel(save->LCM_GPO, lchip->base + LOCOMO_GPO);
- locomo_writel(save->LCM_SPICT, lchip->base + LOCOMO_SPICT);
+ locomo_writel(save->LCM_SPICT, lchip->base + LOCOMO_SPI + LOCOMO_SPICT);
locomo_writel(save->LCM_GPE, lchip->base + LOCOMO_GPE);
locomo_writel(save->LCM_ASD, lchip->base + LOCOMO_ASD);
- locomo_writel(save->LCM_SPIMD, lchip->base + LOCOMO_SPIMD);
+ locomo_writel(save->LCM_SPIMD, lchip->base + LOCOMO_SPI + LOCOMO_SPIMD);
locomo_writel(0x00, lchip->base + LOCOMO_C32K);
locomo_writel(0x90, lchip->base + LOCOMO_TADC);
@@ -688,9 +715,9 @@
/* GPIO */
locomo_writel(0, lchip->base + LOCOMO_GPO);
- locomo_writel( (LOCOMO_GPIO(2) | LOCOMO_GPIO(3) | LOCOMO_GPIO(13) | LOCOMO_GPIO(14))
+ locomo_writel((LOCOMO_GPIO(1) | LOCOMO_GPIO(2) | LOCOMO_GPIO(13) | LOCOMO_GPIO(14))
, lchip->base + LOCOMO_GPE);
- locomo_writel( (LOCOMO_GPIO(2) | LOCOMO_GPIO(3) | LOCOMO_GPIO(13) | LOCOMO_GPIO(14))
+ locomo_writel((LOCOMO_GPIO(1) | LOCOMO_GPIO(2) | LOCOMO_GPIO(13) | LOCOMO_GPIO(14))
, lchip->base + LOCOMO_GPD);
locomo_writel(0, lchip->base + LOCOMO_GIE);
@@ -833,7 +860,10 @@
spin_lock_irqsave(&lchip->lock, flags);
r = locomo_readl(lchip->base + LOCOMO_GPD);
- r &= ~bits;
+ if (dir)
+ r |= bits;
+ else
+ r &= ~bits;
locomo_writel(r, lchip->base + LOCOMO_GPD);
r = locomo_readl(lchip->base + LOCOMO_GPE);
diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c
index f73d62e..688b7b1 100644
--- a/arch/arm/kernel/armksyms.c
+++ b/arch/arm/kernel/armksyms.c
@@ -179,3 +179,5 @@
EXPORT_SYMBOL(_find_first_bit_be);
EXPORT_SYMBOL(_find_next_bit_be);
#endif
+
+EXPORT_SYMBOL(copy_page);
diff --git a/arch/arm/kernel/arthur.c b/arch/arm/kernel/arthur.c
index 0ee2e98..321c529 100644
--- a/arch/arm/kernel/arthur.c
+++ b/arch/arm/kernel/arthur.c
@@ -90,3 +90,5 @@
module_init(arthur_init);
module_exit(arthur_exit);
+
+MODULE_LICENSE("GPL");
diff --git a/arch/arm/kernel/init_task.c b/arch/arm/kernel/init_task.c
index bd4ef53..8b8c9d3 100644
--- a/arch/arm/kernel/init_task.c
+++ b/arch/arm/kernel/init_task.c
@@ -13,7 +13,6 @@
#include <asm/pgtable.h>
static struct fs_struct init_fs = INIT_FS;
-static struct files_struct init_files = INIT_FILES;
static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
struct mm_struct init_mm = INIT_MM(init_mm);
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index 728bb8f..0babb64 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -544,10 +544,10 @@
struct resource *fb_res = &lcdc_resources[2];
size_t fb_len = fb_res->end - fb_res->start + 1;
- fb = ioremap_writecombine(fb_res->start, fb_len);
+ fb = ioremap(fb_res->start, fb_len);
if (fb) {
memset(fb, 0, fb_len);
- iounmap(fb, fb_len);
+ iounmap(fb);
}
}
lcdc_data = *data;
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index 0546898..450db30 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -332,13 +332,6 @@
.end = AT91SAM9RL_ID_LCDC,
.flags = IORESOURCE_IRQ,
},
-#if defined(CONFIG_FB_INTSRAM)
- [2] = {
- .start = AT91SAM9RL_SRAM_BASE,
- .end = AT91SAM9RL_SRAM_BASE + AT91SAM9RL_SRAM_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
-#endif
};
static struct platform_device at91_lcdc_device = {
@@ -381,20 +374,6 @@
at91_set_B_periph(AT91_PIN_PC24, 0); /* LCDD22 */
at91_set_B_periph(AT91_PIN_PC25, 0); /* LCDD23 */
-#ifdef CONFIG_FB_INTSRAM
- {
- void __iomem *fb;
- struct resource *fb_res = &lcdc_resources[2];
- size_t fb_len = fb_res->end - fb_res->start + 1;
-
- fb = ioremap_writecombine(fb_res->start, fb_len);
- if (fb) {
- memset(fb, 0, fb_len);
- iounmap(fb, fb_len);
- }
- }
-#endif
-
lcdc_data = *data;
platform_device_register(&at91_lcdc_device);
}
diff --git a/arch/arm/mach-at91/at91x40.c b/arch/arm/mach-at91/at91x40.c
index 1de121f..f446477 100644
--- a/arch/arm/mach-at91/at91x40.c
+++ b/arch/arm/mach-at91/at91x40.c
@@ -16,16 +16,32 @@
#include <asm/mach/arch.h>
#include <asm/arch/at91x40.h>
#include <asm/arch/at91_st.h>
+#include <asm/arch/timex.h>
#include "generic.h"
/*
- * This is used in the gpio code, stub locally.
+ * Export the clock functions for the AT91X40. Some external code common
+ * to all AT91 family parts relys on this, like the gpio and serial support.
*/
int clk_enable(struct clk *clk)
{
return 0;
}
+void clk_disable(struct clk *clk)
+{
+}
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+ return AT91X40_MASTER_CLOCK;
+}
+
+struct clk *clk_get(struct device *dev, const char *id)
+{
+ return NULL;
+}
+
void __init at91x40_initialize(unsigned long main_clock)
{
at91_extern_irq = (1 << AT91X40_ID_IRQ0) | (1 << AT91X40_ID_IRQ1)
diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c
index 92d79fb..62e653a 100644
--- a/arch/arm/mach-integrator/impd1.c
+++ b/arch/arm/mach-integrator/impd1.c
@@ -369,7 +369,8 @@
lm_set_drvdata(dev, impd1);
- printk("IM-PD1 found at 0x%08lx\n", dev->resource.start);
+ printk("IM-PD1 found at 0x%08lx\n",
+ (unsigned long)dev->resource.start);
for (i = 0; i < ARRAY_SIZE(impd1->vcos); i++) {
impd1->vcos[i].owner = THIS_MODULE,
diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c
index d55fa4e..c07f497 100644
--- a/arch/arm/mach-integrator/pci_v3.c
+++ b/arch/arm/mach-integrator/pci_v3.c
@@ -405,7 +405,6 @@
addr, fsr, pc, instr, __raw_readl(SC_LBFADDR), __raw_readl(SC_LBFCODE) & 255,
v3_readb(V3_LB_ISTAT));
printk(KERN_DEBUG "%s", buf);
- printascii(buf);
#endif
v3_writeb(V3_LB_ISTAT, 0);
@@ -447,6 +446,7 @@
unsigned long pc = instruction_pointer(regs);
unsigned long instr = *(unsigned long *)pc;
char buf[128];
+ extern void printascii(const char *);
sprintf(buf, "V3 int %d: pc=0x%08lx [%08lx] LBFADDR=%08x LBFCODE=%02x "
"ISTAT=%02x\n", IRQ_AP_V3INT, pc, instr,
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index ca1a4bf..a4d2012 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -24,7 +24,6 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/spi/spi.h>
-#include <linux/spi/tsc2102.h>
#include <linux/interrupt.h>
#include <linux/apm-emulation.h>
@@ -63,7 +62,7 @@
KEY(1, 1, KEY_DOWN),
KEY(1, 2, KEY_UP),
KEY(1, 3, KEY_RIGHT),
- KEY(1, 4, KEY_CENTER),
+ KEY(1, 4, KEY_ENTER),
0,
};
@@ -315,14 +314,6 @@
#define palmte_get_power_status NULL
#endif
-static struct tsc2102_config palmte_tsc2102_config = {
- .use_internal = 0,
- .monitor = TSC_BAT1 | TSC_AUX | TSC_TEMP,
- .temp_at25c = { 2200, 2615 },
- .apm_report = palmte_get_power_status,
- .alsa_config = &palmte_alsa_config,
-};
-
static struct omap_board_config_kernel palmte_config[] __initdata = {
{ OMAP_TAG_USB, &palmte_usb_config },
{ OMAP_TAG_MMC, &palmte_mmc_config },
@@ -336,7 +327,6 @@
.bus_num = 2, /* uWire (officially) */
.chip_select = 0, /* As opposed to 3 */
.irq = OMAP_GPIO_IRQ(PALMTE_PINTDAV_GPIO),
- .platform_data = &palmte_tsc2102_config,
.max_speed_hz = 8000000,
},
};
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index 1565107..e020c27 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -65,7 +65,7 @@
KEY(1, 1, KEY_DOWN),
KEY(1, 2, KEY_UP),
KEY(1, 3, KEY_RIGHT),
- KEY(1, 4, KEY_CENTER),
+ KEY(1, 4, KEY_ENTER),
KEY(2, 0, KEY_CAMERA),
0,
};
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index 1c12d7c..1682eb7 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -208,6 +208,7 @@
static void __init omap_2430sdp_map_io(void)
{
+ omap2_set_globals_243x();
omap2_map_common_io();
}
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index a1e1e67..620fa0f 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -394,6 +394,7 @@
static void __init omap_apollon_map_io(void)
{
+ omap2_set_globals_242x();
omap2_map_common_io();
}
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index 9093815..df8be08 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -65,6 +65,7 @@
static void __init omap_generic_map_io(void)
{
+ omap2_set_globals_242x(); /* should be 242x, 243x, or 343x */
omap2_map_common_io();
}
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index d1915f9..0d28f68 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -420,6 +420,7 @@
static void __init omap_h4_map_io(void)
{
+ omap2_set_globals_242x();
omap2_map_common_io();
}
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index b57ffb5..ab9fc57 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -205,7 +205,9 @@
/* REVISIT: What are the appropriate exclusions for 34XX? */
/* OMAP3: ignore DSS-mod clocks */
if (cpu_is_omap34xx() &&
- (((u32)reg & ~0xff) == (u32)OMAP_CM_REGADDR(OMAP3430_DSS_MOD, 0)))
+ (((u32)reg & ~0xff) == (u32)OMAP_CM_REGADDR(OMAP3430_DSS_MOD, 0) ||
+ ((((u32)reg & ~0xff) == (u32)OMAP_CM_REGADDR(CORE_MOD, 0)) &&
+ clk->enable_bit == OMAP3430_EN_SSI_SHIFT)))
return;
/* Check if both functional and interface clocks
diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h
index cf4644a..c9c5972 100644
--- a/arch/arm/mach-omap2/clock34xx.h
+++ b/arch/arm/mach-omap2/clock34xx.h
@@ -836,7 +836,8 @@
.clksel_reg = OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKSEL5),
.clksel_mask = OMAP3430ES2_DIV_120M_MASK,
.clksel = div16_dpll5_clksel,
- .flags = CLOCK_IN_OMAP3430ES2 | RATE_PROPAGATES,
+ .flags = CLOCK_IN_OMAP3430ES2 | RATE_PROPAGATES |
+ PARENT_CONTROLS_CLOCK,
.recalc = &omap2_clksel_recalc,
};
@@ -1046,12 +1047,13 @@
.name = "iva2_ck",
.parent = &dpll2_m2_ck,
.init = &omap2_init_clksel_parent,
+ .enable_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, CM_FCLKEN),
+ .enable_bit = OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_SHIFT,
.clksel_reg = OMAP_CM_REGADDR(OMAP3430_IVA2_MOD,
OMAP3430_CM_IDLEST_PLL),
.clksel_mask = OMAP3430_ST_IVA2_CLK_MASK,
.clksel = iva2_clksel,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
- PARENT_CONTROLS_CLOCK,
+ .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES,
.recalc = &omap2_clksel_recalc,
};
@@ -1836,7 +1838,8 @@
static struct clk ssi_l4_ick = {
.name = "ssi_l4_ick",
.parent = &l4_ick,
- .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES,
+ .flags = CLOCK_IN_OMAP343X | RATE_PROPAGATES |
+ PARENT_CONTROLS_CLOCK,
.recalc = &followparent_recalc,
};
@@ -2344,7 +2347,7 @@
.name = "gpio6_fck",
.parent = &per_32k_alwon_fck,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
- .enable_bit = OMAP3430_EN_GPT6_SHIFT,
+ .enable_bit = OMAP3430_EN_GPIO6_SHIFT,
.flags = CLOCK_IN_OMAP343X,
.recalc = &followparent_recalc,
};
@@ -2353,7 +2356,7 @@
.name = "gpio5_fck",
.parent = &per_32k_alwon_fck,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
- .enable_bit = OMAP3430_EN_GPT5_SHIFT,
+ .enable_bit = OMAP3430_EN_GPIO5_SHIFT,
.flags = CLOCK_IN_OMAP343X,
.recalc = &followparent_recalc,
};
@@ -2362,7 +2365,7 @@
.name = "gpio4_fck",
.parent = &per_32k_alwon_fck,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
- .enable_bit = OMAP3430_EN_GPT4_SHIFT,
+ .enable_bit = OMAP3430_EN_GPIO4_SHIFT,
.flags = CLOCK_IN_OMAP343X,
.recalc = &followparent_recalc,
};
@@ -2371,7 +2374,7 @@
.name = "gpio3_fck",
.parent = &per_32k_alwon_fck,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
- .enable_bit = OMAP3430_EN_GPT3_SHIFT,
+ .enable_bit = OMAP3430_EN_GPIO3_SHIFT,
.flags = CLOCK_IN_OMAP343X,
.recalc = &followparent_recalc,
};
@@ -2380,7 +2383,7 @@
.name = "gpio2_fck",
.parent = &per_32k_alwon_fck,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
- .enable_bit = OMAP3430_EN_GPT2_SHIFT,
+ .enable_bit = OMAP3430_EN_GPIO2_SHIFT,
.flags = CLOCK_IN_OMAP343X,
.recalc = &followparent_recalc,
};
diff --git a/arch/arm/mach-omap2/cm-regbits-34xx.h b/arch/arm/mach-omap2/cm-regbits-34xx.h
index 9249129..3c38395 100644
--- a/arch/arm/mach-omap2/cm-regbits-34xx.h
+++ b/arch/arm/mach-omap2/cm-regbits-34xx.h
@@ -56,6 +56,7 @@
/* CM_FCLKEN_IVA2 */
#define OMAP3430_CM_FCLKEN_IVA2_EN_IVA2 (1 << 0)
+#define OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_SHIFT 0
/* CM_CLKEN_PLL_IVA2 */
#define OMAP3430_IVA2_DPLL_RAMPTIME_SHIFT 8
diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c
index b03cd06..4799561 100644
--- a/arch/arm/mach-omap2/mailbox.c
+++ b/arch/arm/mach-omap2/mailbox.c
@@ -70,6 +70,9 @@
static struct clk *mbox_ick_handle;
+static void omap2_mbox_enable_irq(struct omap_mbox *mbox,
+ omap_mbox_type_t irq);
+
static inline unsigned int mbox_read_reg(unsigned int reg)
{
return __raw_readl(mbox_base + reg);
@@ -81,7 +84,7 @@
}
/* Mailbox H/W preparations */
-static inline int omap2_mbox_startup(struct omap_mbox *mbox)
+static int omap2_mbox_startup(struct omap_mbox *mbox)
{
unsigned int l;
@@ -97,38 +100,40 @@
l |= 0x00000011;
mbox_write_reg(l, MAILBOX_SYSCONFIG);
+ omap2_mbox_enable_irq(mbox, IRQ_RX);
+
return 0;
}
-static inline void omap2_mbox_shutdown(struct omap_mbox *mbox)
+static void omap2_mbox_shutdown(struct omap_mbox *mbox)
{
clk_disable(mbox_ick_handle);
clk_put(mbox_ick_handle);
}
/* Mailbox FIFO handle functions */
-static inline mbox_msg_t omap2_mbox_fifo_read(struct omap_mbox *mbox)
+static mbox_msg_t omap2_mbox_fifo_read(struct omap_mbox *mbox)
{
struct omap_mbox2_fifo *fifo =
&((struct omap_mbox2_priv *)mbox->priv)->rx_fifo;
return (mbox_msg_t) mbox_read_reg(fifo->msg);
}
-static inline void omap2_mbox_fifo_write(struct omap_mbox *mbox, mbox_msg_t msg)
+static void omap2_mbox_fifo_write(struct omap_mbox *mbox, mbox_msg_t msg)
{
struct omap_mbox2_fifo *fifo =
&((struct omap_mbox2_priv *)mbox->priv)->tx_fifo;
mbox_write_reg(msg, fifo->msg);
}
-static inline int omap2_mbox_fifo_empty(struct omap_mbox *mbox)
+static int omap2_mbox_fifo_empty(struct omap_mbox *mbox)
{
struct omap_mbox2_fifo *fifo =
&((struct omap_mbox2_priv *)mbox->priv)->rx_fifo;
return (mbox_read_reg(fifo->msg_stat) == 0);
}
-static inline int omap2_mbox_fifo_full(struct omap_mbox *mbox)
+static int omap2_mbox_fifo_full(struct omap_mbox *mbox)
{
struct omap_mbox2_fifo *fifo =
&((struct omap_mbox2_priv *)mbox->priv)->tx_fifo;
@@ -136,7 +141,7 @@
}
/* Mailbox IRQ handle functions */
-static inline void omap2_mbox_enable_irq(struct omap_mbox *mbox,
+static void omap2_mbox_enable_irq(struct omap_mbox *mbox,
omap_mbox_type_t irq)
{
struct omap_mbox2_priv *p = (struct omap_mbox2_priv *)mbox->priv;
@@ -147,7 +152,7 @@
mbox_write_reg(l, p->irqenable);
}
-static inline void omap2_mbox_disable_irq(struct omap_mbox *mbox,
+static void omap2_mbox_disable_irq(struct omap_mbox *mbox,
omap_mbox_type_t irq)
{
struct omap_mbox2_priv *p = (struct omap_mbox2_priv *)mbox->priv;
@@ -158,7 +163,7 @@
mbox_write_reg(l, p->irqenable);
}
-static inline void omap2_mbox_ack_irq(struct omap_mbox *mbox,
+static void omap2_mbox_ack_irq(struct omap_mbox *mbox,
omap_mbox_type_t irq)
{
struct omap_mbox2_priv *p = (struct omap_mbox2_priv *)mbox->priv;
@@ -167,7 +172,7 @@
mbox_write_reg(bit, p->irqstatus);
}
-static inline int omap2_mbox_is_irq(struct omap_mbox *mbox,
+static int omap2_mbox_is_irq(struct omap_mbox *mbox,
omap_mbox_type_t irq)
{
struct omap_mbox2_priv *p = (struct omap_mbox2_priv *)mbox->priv;
diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h
index ab7649af..618f811 100644
--- a/arch/arm/mach-omap2/prm.h
+++ b/arch/arm/mach-omap2/prm.h
@@ -30,7 +30,7 @@
/*
* Architecture-specific global PRM registers
- * Use prm_{read,write}_reg() with these registers.
+ * Use __raw_{read,write}l() with these registers.
*
* With a few exceptions, these are the register names beginning with
* PRCM_* on 24xx, and PRM_* on 34xx. (The exceptions are the
diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
index f9430f5..27ce967 100644
--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -58,7 +58,7 @@
}
static struct hw_pci dns323_pci __initdata = {
- .nr_controllers = 1,
+ .nr_controllers = 2,
.swizzle = pci_std_swizzle,
.setup = orion5x_pci_sys_setup,
.scan = orion5x_pci_sys_scan_bus,
diff --git a/arch/arm/mach-orion5x/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c
index 8841086..f5074b8 100644
--- a/arch/arm/mach-orion5x/kurobox_pro-setup.c
+++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c
@@ -138,7 +138,7 @@
}
static struct hw_pci kurobox_pro_pci __initdata = {
- .nr_controllers = 1,
+ .nr_controllers = 2,
.swizzle = pci_std_swizzle,
.setup = orion5x_pci_sys_setup,
.scan = orion5x_pci_sys_scan_bus,
diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c
index 6d4416a..f5851d1 100644
--- a/arch/arm/mach-pxa/cm-x270.c
+++ b/arch/arm/mach-pxa/cm-x270.c
@@ -59,7 +59,7 @@
[2] = {
.start = CMX270_ETHIRQ,
.end = CMX270_ETHIRQ,
- .flags = IORESOURCE_IRQ,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
}
};
diff --git a/arch/arm/mach-pxa/colibri.c b/arch/arm/mach-pxa/colibri.c
index 43bf5a1..574839d 100644
--- a/arch/arm/mach-pxa/colibri.c
+++ b/arch/arm/mach-pxa/colibri.c
@@ -98,7 +98,7 @@
[2] = {
.start = COLIBRI_ETH_IRQ,
.end = COLIBRI_ETH_IRQ,
- .flags = IORESOURCE_IRQ,
+ .flags = IORESOURCE_IRQ | IRQF_TRIGGER_RISING,
},
};
@@ -119,7 +119,6 @@
/* DM9000 LAN */
pxa_gpio_mode(GPIO78_nCS_2_MD);
pxa_gpio_mode(GPIO_DM9000 | GPIO_IN);
- set_irq_type(COLIBRI_ETH_IRQ, IRQT_FALLING);
platform_add_devices(colibri_devices, ARRAY_SIZE(colibri_devices));
}
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index edc4f07..9c57700 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -50,7 +50,7 @@
[2] = {
.start = EM_X270_ETHIRQ,
.end = EM_X270_ETHIRQ,
- .flags = IORESOURCE_IRQ,
+ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
}
};
diff --git a/arch/arm/mach-pxa/ssp.c b/arch/arm/mach-pxa/ssp.c
index 00af7f2..0bb3198 100644
--- a/arch/arm/mach-pxa/ssp.c
+++ b/arch/arm/mach-pxa/ssp.c
@@ -330,7 +330,7 @@
mutex_unlock(&ssp_lock);
- if (ssp->port_id != port)
+ if (&ssp->node == &ssp_list)
return NULL;
return ssp;
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index c2cbd66..ab4a9f5 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -467,8 +467,8 @@
static void tosa_poweroff(void)
{
- pxa_gpio_mode(TOSA_GPIO_ON_RESET | GPIO_OUT);
- GPSR(TOSA_GPIO_ON_RESET) = GPIO_bit(TOSA_GPIO_ON_RESET);
+ gpio_direction_output(TOSA_GPIO_ON_RESET, 0);
+ gpio_set_value(TOSA_GPIO_ON_RESET, 1);
mdelay(1000);
arm_machine_restart('h');
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index 661a235..27f63d5 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -374,7 +374,7 @@
[2] = {
.start = IRQ_DM9000,
.end = IRQ_DM9000,
- .flags = IORESOURCE_IRQ,
+ .flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH,
}
};
diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c
index c564233..4c4b5c4 100644
--- a/arch/arm/mach-s3c2410/mach-vr1000.c
+++ b/arch/arm/mach-s3c2410/mach-vr1000.c
@@ -263,7 +263,7 @@
[2] = {
.start = IRQ_VR1000_DM9000A,
.end = IRQ_VR1000_DM9000A,
- .flags = IORESOURCE_IRQ
+ .flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH,
}
};
@@ -282,7 +282,7 @@
[2] = {
.start = IRQ_VR1000_DM9000N,
.end = IRQ_VR1000_DM9000N,
- .flags = IORESOURCE_IRQ
+ .flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH,
}
};
diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c
index 6496eb6..2f772a3 100644
--- a/arch/arm/mach-sa1100/collie.c
+++ b/arch/arm/mach-sa1100/collie.c
@@ -225,26 +225,28 @@
int ret = 0;
/* cpu initialize */
- GAFR = ( GPIO_SSP_TXD | \
- GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SSP_CLK | GPIO_TIC_ACK | \
- GPIO_32_768kHz );
+ GAFR = GPIO_SSP_TXD | GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SSP_CLK |
+ GPIO_MCP_CLK | GPIO_32_768kHz;
- GPDR = ( GPIO_LDD8 | GPIO_LDD9 | GPIO_LDD10 | GPIO_LDD11 | GPIO_LDD12 | \
- GPIO_LDD13 | GPIO_LDD14 | GPIO_LDD15 | GPIO_SSP_TXD | \
- GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SDLC_SCLK | \
- GPIO_SDLC_AAF | GPIO_UART_SCLK1 | GPIO_32_768kHz );
- GPLR = GPIO_GPIO18;
+ GPDR = GPIO_LDD8 | GPIO_LDD9 | GPIO_LDD10 | GPIO_LDD11 | GPIO_LDD12 |
+ GPIO_LDD13 | GPIO_LDD14 | GPIO_LDD15 | GPIO_SSP_TXD |
+ GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SDLC_SCLK |
+ COLLIE_GPIO_UCB1x00_RESET | COLLIE_GPIO_nMIC_ON |
+ COLLIE_GPIO_nREMOCON_ON | GPIO_32_768kHz;
- // PPC pin setting
- PPDR = ( PPC_LDD0 | PPC_LDD1 | PPC_LDD2 | PPC_LDD3 | PPC_LDD4 | PPC_LDD5 | \
- PPC_LDD6 | PPC_LDD7 | PPC_L_PCLK | PPC_L_LCLK | PPC_L_FCLK | PPC_L_BIAS | \
- PPC_TXD1 | PPC_TXD2 | PPC_RXD2 | PPC_TXD3 | PPC_TXD4 | PPC_SCLK | PPC_SFRM );
+ PPDR = PPC_LDD0 | PPC_LDD1 | PPC_LDD2 | PPC_LDD3 | PPC_LDD4 | PPC_LDD5 |
+ PPC_LDD6 | PPC_LDD7 | PPC_L_PCLK | PPC_L_LCLK | PPC_L_FCLK | PPC_L_BIAS |
+ PPC_TXD1 | PPC_TXD2 | PPC_TXD3 | PPC_TXD4 | PPC_SCLK | PPC_SFRM;
- PSDR = ( PPC_RXD1 | PPC_RXD2 | PPC_RXD3 | PPC_RXD4 );
+ PWER = COLLIE_GPIO_AC_IN | COLLIE_GPIO_CO | COLLIE_GPIO_ON_KEY |
+ COLLIE_GPIO_WAKEUP | COLLIE_GPIO_nREMOCON_INT | PWER_RTC;
- GAFR |= GPIO_32_768kHz;
- GPDR |= GPIO_32_768kHz;
- TUCR = TUCR_32_768kHz;
+ PGSR = COLLIE_GPIO_nREMOCON_ON;
+
+ PSDR = PPC_RXD1 | PPC_RXD2 | PPC_RXD3 | PPC_RXD4;
+
+ PCFR = PCFR_OPDE;
+
platform_scoop_config = &collie_pcmcia_config;
diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S
index 065087a..d045812 100644
--- a/arch/arm/mm/proc-arm925.S
+++ b/arch/arm/mm/proc-arm925.S
@@ -332,7 +332,7 @@
#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry
#else
- mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+ mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry
#endif
add r0, r0, #CACHE_DLINESIZE
cmp r0, r1
diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S
index 997db84..4cd3316 100644
--- a/arch/arm/mm/proc-arm926.S
+++ b/arch/arm/mm/proc-arm926.S
@@ -295,7 +295,7 @@
#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry
#else
- mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+ mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry
#endif
add r0, r0, #CACHE_DLINESIZE
cmp r0, r1
diff --git a/arch/arm/mm/proc-arm940.S b/arch/arm/mm/proc-arm940.S
index 44ead90..1a3d63d 100644
--- a/arch/arm/mm/proc-arm940.S
+++ b/arch/arm/mm/proc-arm940.S
@@ -222,7 +222,7 @@
#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
mcr p15, 0, r3, c7, c14, 2 @ clean/flush D entry
#else
- mcr p15, 0, r3, c7, c10, 2 @ clean D entry
+ mcr p15, 0, r3, c7, c6, 2 @ invalidate D entry
#endif
subs r3, r3, #1 << 26
bcs 2b @ entries 63 to 0
diff --git a/arch/arm/mm/proc-arm946.S b/arch/arm/mm/proc-arm946.S
index 2218b0c..82d579a 100644
--- a/arch/arm/mm/proc-arm946.S
+++ b/arch/arm/mm/proc-arm946.S
@@ -265,7 +265,7 @@
#ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
mcr p15, 0, r0, c7, c14, 1 @ clean+invalidate D entry
#else
- mcr p15, 0, r0, c7, c10, 1 @ clean D entry
+ mcr p15, 0, r0, c7, c6, 1 @ invalidate D entry
#endif
add r0, r0, #CACHE_DLINESIZE
cmp r0, r1
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index 72d34a2..2db5580 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -21,6 +21,7 @@
#include <linux/clk.h>
#include <linux/mutex.h>
#include <linux/platform_device.h>
+#include <linux/cpufreq.h>
#include <asm/io.h>
@@ -134,9 +135,17 @@
return;
spin_lock_irqsave(&clockfw_lock, flags);
- BUG_ON(clk->usecount == 0);
+ if (clk->usecount == 0) {
+ printk(KERN_ERR "Trying disable clock %s with 0 usecount\n",
+ clk->name);
+ WARN_ON(1);
+ goto out;
+ }
+
if (arch_clock->clk_disable)
arch_clock->clk_disable(clk);
+
+out:
spin_unlock_irqrestore(&clockfw_lock, flags);
}
EXPORT_SYMBOL(clk_disable);
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 79374068..c00eda5 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -604,6 +604,7 @@
chan->data = data;
#ifndef CONFIG_ARCH_OMAP1
chan->chain_id = -1;
+ chan->next_linked_ch = -1;
#endif
chan->enabled_irqs = OMAP_DMA_DROP_IRQ | OMAP_DMA_BLOCK_IRQ;
@@ -1087,7 +1088,6 @@
printk(KERN_ERR "omap_dma: Request failed %d\n", err);
return err;
}
- dma_chan[channels[i]].next_linked_ch = -1;
dma_chan[channels[i]].prev_linked_ch = -1;
dma_chan[channels[i]].state = DMA_CH_NOTSTARTED;
diff --git a/arch/arm/plat-omap/mailbox.c b/arch/arm/plat-omap/mailbox.c
index 1945ddf..6f33f58 100644
--- a/arch/arm/plat-omap/mailbox.c
+++ b/arch/arm/plat-omap/mailbox.c
@@ -355,7 +355,6 @@
"failed to register mailbox interrupt:%d\n", ret);
goto fail_request_irq;
}
- enable_mbox_irq(mbox, IRQ_RX);
mq = mbox_queue_alloc(mbox, mbox_txq_fn, mbox_tx_work);
if (!mq) {
diff --git a/arch/arm/plat-s3c24xx/s3c244x.c b/arch/arm/plat-s3c24xx/s3c244x.c
index f197bb3..2f01af5 100644
--- a/arch/arm/plat-s3c24xx/s3c244x.c
+++ b/arch/arm/plat-s3c24xx/s3c244x.c
@@ -65,6 +65,7 @@
/* rename any peripherals used differing from the s3c2410 */
+ s3c_device_sdi.name = "s3c2440-sdi";
s3c_device_i2c.name = "s3c2440-i2c";
s3c_device_nand.name = "s3c2440-nand";
s3c_device_usbgadget.name = "s3c2440-usbgadget";
diff --git a/arch/avr32/configs/atngw100_defconfig b/arch/avr32/configs/atngw100_defconfig
index 0604607..119edb8 100644
--- a/arch/avr32/configs/atngw100_defconfig
+++ b/arch/avr32/configs/atngw100_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc7
-# Wed Jan 9 23:20:41 2008
+# Linux kernel version: 2.6.26-rc3
+# Mon May 26 13:30:59 2008
#
CONFIG_AVR32=y
CONFIG_GENERIC_GPIO=y
@@ -13,10 +13,10 @@
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_BUG=y
@@ -37,17 +37,15 @@
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@@ -61,11 +59,13 @@
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
# CONFIG_BASE_FULL is not set
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
@@ -73,11 +73,21 @@
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_HAVE_KPROBES=y
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=1
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
@@ -101,10 +111,15 @@
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
#
# System Type and features
#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SUBARCH_AVR32B=y
CONFIG_MMU=y
CONFIG_PERFORMANCE_COUNTERS=y
@@ -141,16 +156,19 @@
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
# CONFIG_OWNERSHIP_TRACE is not set
+CONFIG_NMI_DEBUGGING=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_CMDLINE=""
#
@@ -164,9 +182,10 @@
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
# CONFIG_CPU_FREQ_STAT is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
@@ -202,6 +221,7 @@
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=y
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
@@ -255,87 +275,40 @@
CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=y
+CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_BRIDGE_NETFILTER=y
+# CONFIG_NETFILTER_ADVANCED is not set
#
# Core Netfilter Configuration
#
-# CONFIG_NETFILTER_NETLINK is not set
-CONFIG_NF_CONNTRACK_ENABLED=m
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CT_ACCT=y
-CONFIG_NF_CONNTRACK_MARK=y
-# CONFIG_NF_CONNTRACK_EVENTS is not set
-CONFIG_NF_CT_PROTO_GRE=m
-# CONFIG_NF_CT_PROTO_SCTP is not set
-# CONFIG_NF_CT_PROTO_UDPLITE is not set
-CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
-CONFIG_NF_CONNTRACK_NETBIOS_NS=m
-CONFIG_NF_CONNTRACK_PPTP=m
-CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
CONFIG_NETFILTER_XTABLES=y
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
-# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
-# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
CONFIG_NETFILTER_XT_MATCH_STATE=m
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-# CONFIG_NETFILTER_XT_MATCH_TIME is not set
-# CONFIG_NETFILTER_XT_MATCH_U32 is not set
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
#
# IP: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
-# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_OWNER=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
@@ -343,54 +316,25 @@
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_NF_NAT_SNMP_BASIC=m
-CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
-CONFIG_NF_NAT_TFTP=m
-CONFIG_NF_NAT_AMANDA=m
-CONFIG_NF_NAT_PPTP=m
-CONFIG_NF_NAT_H323=m
+# CONFIG_NF_NAT_TFTP is not set
+# CONFIG_NF_NAT_AMANDA is not set
+# CONFIG_NF_NAT_PPTP is not set
+# CONFIG_NF_NAT_H323 is not set
CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
#
-# IPv6: Netfilter Configuration (EXPERIMENTAL)
+# IPv6: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV6=m
-CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_OWNER=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AH=m
-CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_RAW=m
-
-#
-# Bridge: Netfilter Configuration
-#
-# CONFIG_BRIDGE_NF_EBTABLES is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
@@ -407,7 +351,6 @@
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
-CONFIG_NET_CLS_ROUTE=y
#
# Network testing
@@ -415,6 +358,7 @@
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
@@ -450,6 +394,7 @@
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
@@ -531,11 +476,18 @@
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
-# CONFIG_MISC_DEVICES is not set
-# CONFIG_IDE is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ATMEL_PWM is not set
+CONFIG_ATMEL_TCLIB=y
+CONFIG_ATMEL_TCB_CLKSRC=y
+CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ATMEL_SSC is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HAVE_IDE is not set
#
# SCSI device support
@@ -568,11 +520,13 @@
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
CONFIG_MACB=y
+# CONFIG_ENC28J60 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -586,6 +540,7 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
@@ -599,7 +554,6 @@
# CONFIG_PPPOL2TP is not set
# CONFIG_SLIP is not set
CONFIG_SLHC=m
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
@@ -621,6 +575,7 @@
# Character devices
#
# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -633,6 +588,7 @@
#
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
# CONFIG_SERIAL_ATMEL_TTYAT is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
@@ -640,21 +596,13 @@
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m
-
-#
-# I2C Algorithms
-#
CONFIG_I2C_ALGOBIT=m
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
#
# I2C Hardware Bus support
@@ -665,27 +613,23 @@
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
@@ -702,9 +646,27 @@
# CONFIG_SPI_AT25 is not set
CONFIG_SPI_SPIDEV=m
# CONFIG_SPI_TLE62X0 is not set
+CONFIG_HAVE_GPIO_LIB=y
+
+#
+# GPIO Support
+#
+# CONFIG_DEBUG_GPIO is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MCP23S08 is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -724,12 +686,22 @@
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
@@ -753,14 +725,12 @@
# CONFIG_USB_ARCH_HAS_HCD is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
-
-#
-# USB Gadget Support
-#
CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
@@ -772,6 +742,7 @@
# CONFIG_USB_GADGET_NET2280 is not set
# CONFIG_USB_GADGET_PXA2XX is not set
# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_OMAP is not set
@@ -787,6 +758,7 @@
# CONFIG_USB_FILE_STORAGE_TEST is not set
CONFIG_USB_G_SERIAL=m
# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
@@ -797,11 +769,13 @@
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_BOUNCE=y
# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
#
# MMC/SD Host Controller Drivers
#
CONFIG_MMC_SPI=m
+# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
@@ -816,6 +790,8 @@
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+# CONFIG_ACCESSIBILITY is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
@@ -844,19 +820,22 @@
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
#
# SPI RTC drivers
#
-# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
#
# Platform RTC drivers
#
+# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
@@ -865,10 +844,6 @@
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_AT32AP700X=y
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -885,14 +860,11 @@
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m
@@ -948,8 +920,10 @@
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
@@ -957,12 +931,10 @@
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
@@ -1030,11 +1002,6 @@
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-CONFIG_KPROBES=y
-# CONFIG_MARKERS is not set
#
# Kernel hacking
@@ -1042,6 +1009,7 @@
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -1052,7 +1020,9 @@
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
@@ -1066,12 +1036,14 @@
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
CONFIG_FRAME_POINTER=y
-# CONFIG_FORCED_INLINING is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_KPROBES_SANITY_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
@@ -1083,52 +1055,90 @@
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=y
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
CONFIG_CRYPTO_DEFLATE=y
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
#
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
CONFIG_CRC_ITU_T=m
@@ -1137,10 +1147,6 @@
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_TEXTSEARCH=y
-CONFIG_TEXTSEARCH_KMP=m
-CONFIG_TEXTSEARCH_BM=m
-CONFIG_TEXTSEARCH_FSM=m
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
diff --git a/arch/avr32/configs/atstk1002_defconfig b/arch/avr32/configs/atstk1002_defconfig
index 2fb2ede..c6d02ea 100644
--- a/arch/avr32/configs/atstk1002_defconfig
+++ b/arch/avr32/configs/atstk1002_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc7
-# Wed Jan 9 23:07:43 2008
+# Linux kernel version: 2.6.26-rc3
+# Mon May 26 13:30:20 2008
#
CONFIG_AVR32=y
CONFIG_GENERIC_GPIO=y
@@ -13,10 +13,10 @@
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_BUG=y
@@ -36,15 +36,15 @@
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
-# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@@ -58,11 +58,13 @@
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
# CONFIG_BASE_FULL is not set
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
@@ -70,11 +72,21 @@
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_HAVE_KPROBES=y
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=1
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
@@ -98,10 +110,15 @@
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
#
# System Type and features
#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SUBARCH_AVR32B=y
CONFIG_MMU=y
CONFIG_PERFORMANCE_COUNTERS=y
@@ -147,16 +164,19 @@
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
# CONFIG_OWNERSHIP_TRACE is not set
+CONFIG_NMI_DEBUGGING=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_CMDLINE=""
#
@@ -170,9 +190,10 @@
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
# CONFIG_CPU_FREQ_STAT is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
@@ -208,6 +229,7 @@
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
@@ -252,8 +274,10 @@
CONFIG_INET6_XFRM_MODE_BEET=m
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -279,6 +303,7 @@
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
@@ -314,6 +339,7 @@
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
@@ -368,6 +394,7 @@
#
CONFIG_MTD_DATAFLASH=m
CONFIG_MTD_M25P80=m
+CONFIG_M25PXX_USE_FAST_READ=y
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
@@ -395,13 +422,18 @@
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
+CONFIG_ATMEL_PWM=m
+CONFIG_ATMEL_TCLIB=y
+CONFIG_ATMEL_TCB_CLKSRC=y
+CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
# CONFIG_EEPROM_93CX6 is not set
CONFIG_ATMEL_SSC=m
-# CONFIG_IDE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HAVE_IDE is not set
#
# SCSI device support
@@ -444,6 +476,9 @@
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_ATA=m
# CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_SATA_PMP is not set
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_MV is not set
CONFIG_PATA_AT32=m
# CONFIG_PATA_PLATFORM is not set
# CONFIG_MD is not set
@@ -469,11 +504,13 @@
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
CONFIG_MACB=y
+# CONFIG_ENC28J60 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -487,6 +524,7 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
@@ -500,7 +538,6 @@
# CONFIG_PPPOL2TP is not set
# CONFIG_SLIP is not set
CONFIG_SLHC=m
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
@@ -556,6 +593,7 @@
# Character devices
#
# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -568,6 +606,7 @@
#
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
# CONFIG_SERIAL_ATMEL_TTYAT is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
@@ -575,21 +614,13 @@
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m
-
-#
-# I2C Algorithms
-#
CONFIG_I2C_ALGOBIT=m
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
#
# I2C Hardware Bus support
@@ -600,27 +631,23 @@
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
@@ -637,9 +664,27 @@
# CONFIG_SPI_AT25 is not set
CONFIG_SPI_SPIDEV=m
# CONFIG_SPI_TLE62X0 is not set
+CONFIG_HAVE_GPIO_LIB=y
+
+#
+# GPIO Support
+#
+# CONFIG_DEBUG_GPIO is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MCP23S08 is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -659,12 +704,22 @@
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
@@ -682,8 +737,8 @@
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
@@ -749,7 +804,11 @@
# CONFIG_SND_SOC is not set
#
-# SoC Audio support for SuperH
+# ALSA SoC audio for Freescale SOCs
+#
+
+#
+# SoC Audio for the Texas Instruments OMAP
#
#
@@ -761,14 +820,12 @@
# CONFIG_USB_ARCH_HAS_HCD is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
-
-#
-# USB Gadget Support
-#
CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
@@ -781,6 +838,7 @@
# CONFIG_USB_GADGET_NET2280 is not set
# CONFIG_USB_GADGET_PXA2XX is not set
# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_OMAP is not set
@@ -796,6 +854,7 @@
# CONFIG_USB_FILE_STORAGE_TEST is not set
CONFIG_USB_G_SERIAL=m
# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
@@ -806,17 +865,20 @@
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_BOUNCE=y
# CONFIG_SDIO_UART is not set
+CONFIG_MMC_TEST=m
#
# MMC/SD Host Controller Drivers
#
CONFIG_MMC_SPI=m
+# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m
#
# LED drivers
#
+CONFIG_LEDS_ATMEL_PWM=m
CONFIG_LEDS_GPIO=m
#
@@ -825,6 +887,8 @@
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
+# CONFIG_ACCESSIBILITY is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
@@ -853,19 +917,22 @@
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
#
# SPI RTC drivers
#
-# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
#
# Platform RTC drivers
#
+# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
@@ -874,10 +941,6 @@
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_AT32AP700X=y
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -895,14 +958,11 @@
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-CONFIG_MINIX_FS=m
-# CONFIG_ROMFS_FS is not set
+# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m
@@ -957,8 +1017,10 @@
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=m
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
@@ -966,7 +1028,6 @@
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
@@ -1028,11 +1089,6 @@
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-CONFIG_KPROBES=y
-# CONFIG_MARKERS is not set
#
# Kernel hacking
@@ -1040,6 +1096,7 @@
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
@@ -1050,7 +1107,9 @@
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
@@ -1064,12 +1123,14 @@
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_KPROBES_SANITY_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
@@ -1081,52 +1142,90 @@
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_HASH=m
CONFIG_CRYPTO_MANAGER=m
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
CONFIG_CRYPTO_HMAC=m
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=m
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_CRYPTO_SHA1=m
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=m
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=m
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=m
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
CONFIG_CRYPTO_DEFLATE=m
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_LZO is not set
# CONFIG_CRYPTO_HW is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
CONFIG_CRC_ITU_T=m
diff --git a/arch/avr32/configs/atstk1003_defconfig b/arch/avr32/configs/atstk1003_defconfig
index 45e23e0..5a4ae6b 100644
--- a/arch/avr32/configs/atstk1003_defconfig
+++ b/arch/avr32/configs/atstk1003_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc7
-# Wed Jan 9 22:54:34 2008
+# Linux kernel version: 2.6.26-rc3
+# Mon May 26 13:33:05 2008
#
CONFIG_AVR32=y
CONFIG_GENERIC_GPIO=y
@@ -13,10 +13,10 @@
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_BUG=y
@@ -39,17 +39,15 @@
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
# CONFIG_TASK_XACCT is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
CONFIG_AUDIT=y
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
+# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
@@ -63,11 +61,13 @@
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
# CONFIG_BASE_FULL is not set
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
@@ -75,11 +75,20 @@
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
-CONFIG_SLABINFO=y
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=m
+CONFIG_HAVE_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_HAVE_KPROBES=y
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=1
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
@@ -103,10 +112,15 @@
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_CLASSIC_RCU=y
#
# System Type and features
#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SUBARCH_AVR32B=y
CONFIG_MMU=y
CONFIG_PERFORMANCE_COUNTERS=y
@@ -152,16 +166,19 @@
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
# CONFIG_OWNERSHIP_TRACE is not set
+CONFIG_NMI_DEBUGGING=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_CMDLINE=""
#
@@ -175,9 +192,10 @@
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
# CONFIG_CPU_FREQ_STAT is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
@@ -234,8 +252,6 @@
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -260,6 +276,7 @@
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
@@ -295,6 +312,7 @@
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
@@ -349,6 +367,7 @@
#
CONFIG_MTD_DATAFLASH=m
CONFIG_MTD_M25P80=m
+CONFIG_M25PXX_USE_FAST_READ=y
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
@@ -376,13 +395,18 @@
CONFIG_BLK_DEV_RAM=m
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
+CONFIG_ATMEL_PWM=m
+CONFIG_ATMEL_TCLIB=y
+CONFIG_ATMEL_TCB_CLKSRC=y
+CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0
# CONFIG_EEPROM_93CX6 is not set
CONFIG_ATMEL_SSC=m
-# CONFIG_IDE is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HAVE_IDE is not set
#
# SCSI device support
@@ -427,6 +451,9 @@
# CONFIG_SCSI_DEBUG is not set
CONFIG_ATA=m
# CONFIG_ATA_NONSTANDARD is not set
+# CONFIG_SATA_PMP is not set
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_MV is not set
CONFIG_PATA_AT32=m
# CONFIG_PATA_PLATFORM is not set
# CONFIG_MD is not set
@@ -447,6 +474,7 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
@@ -460,7 +488,6 @@
# CONFIG_PPPOL2TP is not set
# CONFIG_SLIP is not set
CONFIG_SLHC=m
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
@@ -516,6 +543,7 @@
# Character devices
#
# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -528,6 +556,7 @@
#
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_SERIAL_ATMEL_PDC=y
# CONFIG_SERIAL_ATMEL_TTYAT is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
@@ -535,21 +564,13 @@
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m
-
-#
-# I2C Algorithms
-#
CONFIG_I2C_ALGOBIT=m
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
#
# I2C Hardware Bus support
@@ -560,27 +581,23 @@
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
#
-# CONFIG_SENSORS_DS1337 is not set
-# CONFIG_SENSORS_DS1374 is not set
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
@@ -597,9 +614,27 @@
# CONFIG_SPI_AT25 is not set
CONFIG_SPI_SPIDEV=m
# CONFIG_SPI_TLE62X0 is not set
+CONFIG_HAVE_GPIO_LIB=y
+
+#
+# GPIO Support
+#
+# CONFIG_DEBUG_GPIO is not set
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MCP23S08 is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -619,12 +654,22 @@
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
@@ -682,7 +727,11 @@
# CONFIG_SND_SOC is not set
#
-# SoC Audio support for SuperH
+# ALSA SoC audio for Freescale SOCs
+#
+
+#
+# SoC Audio for the Texas Instruments OMAP
#
#
@@ -694,14 +743,12 @@
# CONFIG_USB_ARCH_HAS_HCD is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
-
-#
-# USB Gadget Support
-#
CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
@@ -714,6 +761,7 @@
# CONFIG_USB_GADGET_NET2280 is not set
# CONFIG_USB_GADGET_PXA2XX is not set
# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_OMAP is not set
@@ -729,6 +777,7 @@
# CONFIG_USB_FILE_STORAGE_TEST is not set
CONFIG_USB_G_SERIAL=m
# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
@@ -739,17 +788,20 @@
CONFIG_MMC_BLOCK=m
# CONFIG_MMC_BLOCK_BOUNCE is not set
# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
#
# MMC/SD Host Controller Drivers
#
CONFIG_MMC_SPI=m
+# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# LED drivers
#
+CONFIG_LEDS_ATMEL_PWM=m
CONFIG_LEDS_GPIO=y
#
@@ -758,6 +810,8 @@
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+# CONFIG_ACCESSIBILITY is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
@@ -786,19 +840,22 @@
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
#
# SPI RTC drivers
#
-# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
#
# Platform RTC drivers
#
+# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
@@ -807,11 +864,8 @@
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_AT32AP700X=y
-
-#
-# Userspace I/O
-#
CONFIG_UIO=m
+# CONFIG_UIO_SMX is not set
#
# File systems
@@ -828,14 +882,11 @@
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m
@@ -891,8 +942,10 @@
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
@@ -943,11 +996,6 @@
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
-CONFIG_INSTRUMENTATION=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-CONFIG_KPROBES=y
-# CONFIG_MARKERS is not set
#
# Kernel hacking
@@ -955,6 +1003,7 @@
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
@@ -965,6 +1014,7 @@
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
@@ -978,12 +1028,14 @@
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_KPROBES_SANITY_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
@@ -1000,6 +1052,8 @@
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
CONFIG_CRC_ITU_T=m
diff --git a/arch/avr32/configs/atstk1004_defconfig b/arch/avr32/configs/atstk1004_defconfig
index 634c527..a0912fb 100644
--- a/arch/avr32/configs/atstk1004_defconfig
+++ b/arch/avr32/configs/atstk1004_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24-rc7
-# Wed Jan 9 23:04:20 2008
+# Linux kernel version: 2.6.26-rc3
+# Mon May 26 13:34:57 2008
#
CONFIG_AVR32=y
CONFIG_GENERIC_GPIO=y
@@ -13,10 +13,10 @@
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_BUG=y
@@ -34,15 +34,15 @@
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
-# CONFIG_FAIR_GROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
@@ -54,24 +54,38 @@
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+# CONFIG_COMPAT_BRK is not set
# CONFIG_BASE_FULL is not set
# CONFIG_FUTEX is not set
# CONFIG_EPOLL is not set
# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
# CONFIG_EVENTFD is not set
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_SLAB is not set
# CONFIG_SLUB is not set
CONFIG_SLOB=y
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+# CONFIG_PROC_PAGE_MONITOR is not set
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=1
# CONFIG_MODULES is not set
# CONFIG_BLOCK is not set
+CONFIG_CLASSIC_RCU=y
#
# System Type and features
#
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SUBARCH_AVR32B=y
CONFIG_MMU=y
CONFIG_PERFORMANCE_COUNTERS=y
@@ -115,16 +129,19 @@
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
# CONFIG_OWNERSHIP_TRACE is not set
+# CONFIG_NMI_DEBUGGING is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+# CONFIG_SCHED_HRTICK is not set
CONFIG_CMDLINE=""
#
@@ -134,20 +151,7 @@
#
# CPU Frequency scaling
#
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
-# CONFIG_CPU_FREQ_DEBUG is not set
-# CONFIG_CPU_FREQ_STAT is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_AT32AP=y
+# CONFIG_CPU_FREQ is not set
#
# Bus options
@@ -197,8 +201,6 @@
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -222,6 +224,7 @@
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
@@ -255,6 +258,7 @@
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
@@ -321,6 +325,7 @@
# CONFIG_MTD_UBI is not set
# CONFIG_PARPORT is not set
# CONFIG_MISC_DEVICES is not set
+# CONFIG_HAVE_IDE is not set
#
# SCSI device support
@@ -346,6 +351,7 @@
# Character devices
#
# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -358,6 +364,7 @@
#
CONFIG_SERIAL_ATMEL=y
CONFIG_SERIAL_ATMEL_CONSOLE=y
+# CONFIG_SERIAL_ATMEL_PDC is not set
# CONFIG_SERIAL_ATMEL_TTYAT is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
@@ -365,15 +372,9 @@
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
CONFIG_SPI=y
CONFIG_SPI_MASTER=y
@@ -389,9 +390,24 @@
# CONFIG_SPI_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
+CONFIG_HAVE_GPIO_LIB=y
+
+#
+# GPIO Support
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MCP23S08 is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
@@ -411,12 +427,22 @@
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
@@ -434,8 +460,8 @@
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
@@ -467,14 +493,12 @@
# CONFIG_USB_ARCH_HAS_HCD is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
-
-#
-# USB Gadget Support
-#
CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG_FILES is not set
CONFIG_USB_GADGET_SELECTED=y
@@ -485,6 +509,7 @@
# CONFIG_USB_GADGET_NET2280 is not set
# CONFIG_USB_GADGET_PXA2XX is not set
# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_OMAP is not set
@@ -499,8 +524,11 @@
# CONFIG_USB_FILE_STORAGE is not set
# CONFIG_USB_G_SERIAL is not set
# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
@@ -519,15 +547,17 @@
#
# SPI RTC drivers
#
-# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
#
# Platform RTC drivers
#
+# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
@@ -536,18 +566,14 @@
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_AT32AP700X=y
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
# File systems
#
+# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
# CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
@@ -580,7 +606,6 @@
# CONFIG_NETWORK_FILESYSTEMS is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
-# CONFIG_INSTRUMENTATION is not set
#
# Kernel hacking
@@ -588,6 +613,7 @@
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -608,6 +634,8 @@
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
diff --git a/arch/avr32/kernel/avr32_ksyms.c b/arch/avr32/kernel/avr32_ksyms.c
index 80f55f8..84a7d44 100644
--- a/arch/avr32/kernel/avr32_ksyms.c
+++ b/arch/avr32/kernel/avr32_ksyms.c
@@ -29,7 +29,9 @@
*/
EXPORT_SYMBOL(memset);
EXPORT_SYMBOL(memcpy);
+
EXPORT_SYMBOL(clear_page);
+EXPORT_SYMBOL(copy_page);
/*
* Userspace access stuff.
@@ -41,6 +43,8 @@
EXPORT_SYMBOL(__strncpy_from_user);
EXPORT_SYMBOL(clear_user);
EXPORT_SYMBOL(__clear_user);
+EXPORT_SYMBOL(strnlen_user);
+
EXPORT_SYMBOL(csum_partial);
EXPORT_SYMBOL(csum_partial_copy_generic);
diff --git a/arch/avr32/kernel/init_task.c b/arch/avr32/kernel/init_task.c
index effcacf..4405846 100644
--- a/arch/avr32/kernel/init_task.c
+++ b/arch/avr32/kernel/init_task.c
@@ -14,7 +14,6 @@
#include <asm/pgtable.h>
static struct fs_struct init_fs = INIT_FS;
-static struct files_struct init_files = INIT_FILES;
static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
struct mm_struct init_mm = INIT_MM(init_mm);
diff --git a/arch/avr32/mach-at32ap/cpufreq.c b/arch/avr32/mach-at32ap/cpufreq.c
index 235524b..5dd8d25 100644
--- a/arch/avr32/mach-at32ap/cpufreq.c
+++ b/arch/avr32/mach-at32ap/cpufreq.c
@@ -108,5 +108,4 @@
{
return cpufreq_register_driver(&at32_driver);
}
-
-arch_initcall(at32_cpufreq_init);
+late_initcall(at32_cpufreq_init);
diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig
index fd57085..b87634e 100644
--- a/arch/blackfin/Kconfig
+++ b/arch/blackfin/Kconfig
@@ -479,16 +479,6 @@
comment "Misc"
-config ENET_FLASH_PIN
- int "PF port/pin used for flash and ethernet sharing"
- depends on (BFIN533_STAMP)
- default 0
- help
- PF port/pin used for flash and ethernet sharing to allow other PF
- pins to be used on other platforms without having to touch common
- code.
- For example: PF0 --> 0,PF1 --> 1,PF2 --> 2, etc.
-
choice
prompt "Blackfin Exception Scratch Register"
default BFIN_SCRATCH_REG_RETN
@@ -695,6 +685,8 @@
prompt "Uncached SDRAM region"
default DMA_UNCACHED_1M
depends on BFIN_DMA_5XX
+config DMA_UNCACHED_4M
+ bool "Enable 4M DMA region"
config DMA_UNCACHED_2M
bool "Enable 2M DMA region"
config DMA_UNCACHED_1M
diff --git a/arch/blackfin/configs/BF527-EZKIT_defconfig b/arch/blackfin/configs/BF527-EZKIT_defconfig
index 64876df..5e6fb9d 100644
--- a/arch/blackfin/configs/BF527-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF527-EZKIT_defconfig
@@ -1,6 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22.16
+# Linux kernel version: 2.6.24.7
+# Fri May 16 10:02:29 2008
#
# CONFIG_MMU is not set
# CONFIG_FPU is not set
@@ -13,35 +14,34 @@
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_GPIO=y
CONFIG_FORCE_MAX_ZONEORDER=14
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
-# Code maturity level options
+# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
@@ -64,32 +64,24 @@
CONFIG_SIGNALFD=y
CONFIG_EVENTFD=y
CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3
-# CONFIG_NP2 is not set
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_TINY_SHMEM=y
CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
-
-#
-# Block layer
-#
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
#
# IO Schedulers
@@ -141,7 +133,6 @@
# CONFIG_BF_REV_ANY is not set
# CONFIG_BF_REV_NONE is not set
CONFIG_BF52x=y
-CONFIG_BFIN_SINGLE_CORE=y
CONFIG_MEM_MT48LC32M16A2TG_75=y
CONFIG_BFIN527_EZKIT=y
@@ -227,12 +218,14 @@
# Board customizations
#
# CONFIG_CMDLINE_BOOL is not set
+CONFIG_BOOT_LOAD=0x1000
#
# Clock/PLL Setup
#
CONFIG_CLKIN_HZ=25000000
# CONFIG_BFIN_KERNEL_CLOCK is not set
+CONFIG_MAX_MEM_SIZE=512
CONFIG_MAX_VCO_HZ=600000000
CONFIG_MIN_VCO_HZ=50000000
CONFIG_MAX_SCLK_HZ=133333333
@@ -246,13 +239,17 @@
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_CYCLES_CLOCKSOURCE is not set
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
#
-# Memory Setup
+# Misc
#
-CONFIG_MAX_MEM_SIZE=512
-CONFIG_MEM_ADD_WIDTH=10
-CONFIG_BOOT_LOAD=0x1000
CONFIG_BFIN_SCRATCH_REG_RETN=y
# CONFIG_BFIN_SCRATCH_REG_RETE is not set
# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
@@ -288,12 +285,14 @@
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
-CONFIG_LARGE_ALLOCS=y
+CONFIG_VIRT_TO_BUS=y
# CONFIG_BFIN_GPTIMERS is not set
CONFIG_BFIN_DMA_5XX=y
+# CONFIG_DMA_UNCACHED_4M is not set
# CONFIG_DMA_UNCACHED_2M is not set
CONFIG_DMA_UNCACHED_1M=y
# CONFIG_DMA_UNCACHED_NONE is not set
@@ -338,10 +337,6 @@
#
# CONFIG_PCI is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
# CONFIG_PCCARD is not set
#
@@ -357,9 +352,15 @@
# Power management options
#
# CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
# CONFIG_PM_WAKEUP_BY_GPIO is not set
#
+# CPU Frequency scaling
+#
+# CONFIG_CPU_FREQ is not set
+
+#
# Networking
#
CONFIG_NET=y
@@ -395,6 +396,7 @@
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
@@ -421,10 +423,6 @@
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
@@ -444,6 +442,7 @@
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
#
# Device Drivers
@@ -452,14 +451,11 @@
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
@@ -479,6 +475,7 @@
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
@@ -542,39 +539,27 @@
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_NANDSIM is not set
# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
# CONFIG_MTD_ONENAND is not set
#
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
-
-#
-# Parallel port support
-#
# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
# CONFIG_IDE is not set
#
@@ -582,22 +567,18 @@
#
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
# CONFIG_MD is not set
-
-#
-# Network device support
-#
CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+# CONFIG_VETH is not set
CONFIG_PHYLIB=y
#
@@ -611,21 +592,24 @@
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
# CONFIG_FIXED_PHY is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
+# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
-# CONFIG_SMC91X is not set
CONFIG_BFIN_MAC=y
CONFIG_BFIN_MAC_USE_L1=y
CONFIG_BFIN_TX_DESC_NUM=10
CONFIG_BFIN_RX_DESC_NUM=20
CONFIG_BFIN_MAC_RMII=y
+# CONFIG_SMC91X is not set
# CONFIG_SMSC911X is not set
# CONFIG_DM9000 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
CONFIG_NETDEV_1000=y
# CONFIG_AX88180 is not set
CONFIG_NETDEV_10000=y
@@ -635,6 +619,15 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
@@ -642,15 +635,7 @@
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
# CONFIG_PHONE is not set
#
@@ -665,7 +650,6 @@
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
@@ -697,7 +681,6 @@
#
# CONFIG_AD9960 is not set
# CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF5xx_PFLAGS is not set
# CONFIG_BF5xx_PPIFCD is not set
# CONFIG_BFIN_SIMPLE_TIMER is not set
# CONFIG_BF5xx_PPI is not set
@@ -706,7 +689,7 @@
# CONFIG_BFIN_SPORT is not set
# CONFIG_BFIN_TIMER_LATENCY is not set
# CONFIG_TWI_LCD is not set
-# CONFIG_AD5304 is not set
+# CONFIG_SIMPLE_GPIO is not set
# CONFIG_VT is not set
# CONFIG_SERIAL_NONSTANDARD is not set
@@ -735,27 +718,11 @@
# CAN, the car bus and industrial fieldbus
#
# CONFIG_CAN4LINUX is not set
-
-#
-# IPMI
-#
# CONFIG_IPMI_HANDLER is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_BFIN_WDT=y
CONFIG_HW_RANDOM=y
# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
@@ -777,21 +744,24 @@
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
# CONFIG_SENSORS_AD5252 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCF8575 is not set
-# CONFIG_SENSORS_PCA9543 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
@@ -814,14 +784,11 @@
#
# CONFIG_SPI_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
-
-#
-# Dallas's 1-wire bus
-#
+# CONFIG_SPI_TLE62X0 is not set
# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
@@ -829,12 +796,12 @@
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
@@ -849,13 +816,16 @@
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
@@ -865,6 +835,25 @@
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_BFIN_WDT=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
# Multifunction device drivers
@@ -881,72 +870,133 @@
#
# Graphics support
#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-# CONFIG_FB is not set
#
# Sound
#
# CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
+CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
#
-# USB support
+# USB Input Devices
#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
#
-# Enable Host or Gadget support to see Inventra options
+# Miscellaneous USB options
#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+CONFIG_USB_OTG_BLACKLIST_HUB=y
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_SOC=y
+
+#
+# Blackfin high speed USB support
+#
+CONFIG_USB_MUSB_HOST=y
+# CONFIG_USB_MUSB_PERIPHERAL is not set
+# CONFIG_USB_MUSB_OTG is not set
+CONFIG_USB_MUSB_HDRC_HCD=y
+CONFIG_MUSB_PIO_ONLY=y
+CONFIG_USB_MUSB_LOGLEVEL=0
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
+# may also be needed; see USB_STORAGE Help for more information
+#
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+
+#
+# USB DSL modem support
+#
+
+#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
-
-#
-# LED devices
-#
# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
@@ -966,6 +1016,7 @@
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
@@ -973,6 +1024,7 @@
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
#
# SPI RTC drivers
@@ -984,8 +1036,10 @@
# Platform RTC drivers
#
# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
@@ -994,22 +1048,9 @@
CONFIG_RTC_DRV_BFIN=y
#
-# DMA Engine support
+# Userspace I/O
#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# PBX support
-#
-# CONFIG_PBX is not set
+# CONFIG_UIO is not set
#
# File systems
@@ -1054,7 +1095,6 @@
CONFIG_SYSFS=y
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
@@ -1080,10 +1120,12 @@
CONFIG_JFFS2_FS=m
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
# CONFIG_JFFS2_SUMMARY is not set
# CONFIG_JFFS2_FS_XATTR is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_CRAMFS is not set
@@ -1092,10 +1134,7 @@
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
@@ -1115,17 +1154,12 @@
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
CONFIG_NLS=m
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
@@ -1166,21 +1200,16 @@
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
+CONFIG_INSTRUMENTATION=y
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
@@ -1188,6 +1217,7 @@
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
CONFIG_DEBUG_MMRS=y
CONFIG_DEBUG_HUNT_FOR_ZERO=y
CONFIG_DEBUG_BFIN_HWTRACE_ON=y
@@ -1207,11 +1237,8 @@
# CONFIG_KEYS is not set
CONFIG_SECURITY=y
# CONFIG_SECURITY_NETWORK is not set
-CONFIG_SECURITY_CAPABILITIES=m
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_CAPABILITIES is not set
+# CONFIG_SECURITY_ROOTPLUG is not set
# CONFIG_CRYPTO is not set
#
@@ -1222,6 +1249,7 @@
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/blackfin/configs/BF548-EZKIT_defconfig b/arch/blackfin/configs/BF548-EZKIT_defconfig
index 5bfdfb2..1ff2ff4 100644
--- a/arch/blackfin/configs/BF548-EZKIT_defconfig
+++ b/arch/blackfin/configs/BF548-EZKIT_defconfig
@@ -1,6 +1,6 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.22.16
+# Linux kernel version: 2.6.24.7
#
# CONFIG_MMU is not set
# CONFIG_FPU is not set
@@ -13,35 +13,34 @@
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_GPIO=y
CONFIG_FORCE_MAX_ZONEORDER=14
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
-# Code maturity level options
+# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_FAIR_USER_SCHED=y
+# CONFIG_FAIR_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
@@ -64,32 +63,24 @@
CONFIG_SIGNALFD=y
CONFIG_EVENTFD=y
CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_BIG_ORDER_ALLOC_NOFAIL_MAGIC=3
-# CONFIG_NP2 is not set
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
+CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_TINY_SHMEM=y
CONFIG_BASE_SMALL=0
-
-#
-# Loadable module support
-#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
-
-#
-# Block layer
-#
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
#
# IO Schedulers
@@ -141,7 +132,6 @@
# CONFIG_BF_REV_ANY is not set
# CONFIG_BF_REV_NONE is not set
CONFIG_BF54x=y
-CONFIG_BFIN_SINGLE_CORE=y
CONFIG_IRQ_PLL_WAKEUP=7
CONFIG_IRQ_RTC=8
CONFIG_IRQ_SPORT0_RX=9
@@ -169,6 +159,7 @@
CONFIG_IRQ_TIMER9=11
CONFIG_IRQ_TIMER10=11
CONFIG_BFIN548_EZKIT=y
+# CONFIG_BFIN548_BLUETECHNIX_CM is not set
#
# BF548 Specific Configuration
@@ -262,12 +253,14 @@
# Board customizations
#
# CONFIG_CMDLINE_BOOL is not set
+CONFIG_BOOT_LOAD=0x1000
#
# Clock/PLL Setup
#
CONFIG_CLKIN_HZ=25000000
# CONFIG_BFIN_KERNEL_CLOCK is not set
+CONFIG_MAX_MEM_SIZE=512
CONFIG_MAX_VCO_HZ=600000000
CONFIG_MIN_VCO_HZ=50000000
CONFIG_MAX_SCLK_HZ=133333333
@@ -281,14 +274,17 @@
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+# CONFIG_CYCLES_CLOCKSOURCE is not set
+# CONFIG_TICK_ONESHOT is not set
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
#
-# Memory Setup
+# Misc
#
-CONFIG_MAX_MEM_SIZE=512
-# CONFIG_MEM_MT46V32M16_6T is not set
-CONFIG_MEM_MT46V32M16_5B=y
-CONFIG_BOOT_LOAD=0x1000
CONFIG_BFIN_SCRATCH_REG_RETN=y
# CONFIG_BFIN_SCRATCH_REG_RETE is not set
# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set
@@ -324,12 +320,14 @@
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
-CONFIG_LARGE_ALLOCS=y
+CONFIG_VIRT_TO_BUS=y
# CONFIG_BFIN_GPTIMERS is not set
CONFIG_BFIN_DMA_5XX=y
+# CONFIG_DMA_UNCACHED_4M is not set
CONFIG_DMA_UNCACHED_2M=y
# CONFIG_DMA_UNCACHED_1M is not set
# CONFIG_DMA_UNCACHED_NONE is not set
@@ -377,10 +375,6 @@
#
# CONFIG_PCI is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
# CONFIG_PCCARD is not set
#
@@ -396,6 +390,7 @@
# Power management options
#
# CONFIG_PM is not set
+CONFIG_SUSPEND_UP_POSSIBLE=y
# CONFIG_PM_WAKEUP_BY_GPIO is not set
#
@@ -439,6 +434,7 @@
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
@@ -465,10 +461,6 @@
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
@@ -488,6 +480,7 @@
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
#
# Device Drivers
@@ -496,14 +489,11 @@
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
@@ -523,6 +513,7 @@
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
@@ -587,39 +578,27 @@
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_NANDSIM is not set
# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
# CONFIG_MTD_ONENAND is not set
#
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
-
-#
-# Parallel port support
-#
# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
+CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
# CONFIG_IDE is not set
#
@@ -627,6 +606,7 @@
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y
@@ -657,43 +637,35 @@
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
-# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
-
-#
-# SCSI low-level drivers
-#
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_SCSI_DEBUG is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
# CONFIG_PATA_PLATFORM is not set
CONFIG_PATA_BF54X=y
-CONFIG_PATA_BF54X_DMA=y
-
-#
-# Multi-device support (RAID and LVM)
-#
# CONFIG_MD is not set
-
-#
-# Network device support
-#
CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+# CONFIG_VETH is not set
# CONFIG_PHYLIB is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_SMC91X is not set
CONFIG_SMSC911X=y
# CONFIG_DM9000 is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
CONFIG_NETDEV_1000=y
# CONFIG_AX88180 is not set
CONFIG_NETDEV_10000=y
@@ -703,6 +675,15 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
@@ -710,15 +691,7 @@
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
# CONFIG_PHONE is not set
#
@@ -733,9 +706,6 @@
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_TSDEV=m
-CONFIG_INPUT_TSDEV_SCREEN_X=240
-CONFIG_INPUT_TSDEV_SCREEN_Y=320
CONFIG_INPUT_EVDEV=m
CONFIG_INPUT_EVBUG=m
@@ -758,6 +728,7 @@
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_ADS7846 is not set
CONFIG_TOUCHSCREEN_AD7877=m
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
@@ -787,7 +758,6 @@
#
# CONFIG_AD9960 is not set
# CONFIG_SPI_ADC_BF533 is not set
-# CONFIG_BF5xx_PFLAGS is not set
# CONFIG_BF5xx_PPIFCD is not set
# CONFIG_BFIN_SIMPLE_TIMER is not set
# CONFIG_BF5xx_PPI is not set
@@ -796,7 +766,7 @@
# CONFIG_BFIN_SPORT is not set
# CONFIG_BFIN_TIMER_LATENCY is not set
# CONFIG_TWI_LCD is not set
-# CONFIG_AD5304 is not set
+# CONFIG_SIMPLE_GPIO is not set
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
@@ -830,27 +800,11 @@
# CAN, the car bus and industrial fieldbus
#
# CONFIG_CAN4LINUX is not set
-
-#
-# IPMI
-#
# CONFIG_IPMI_HANDLER is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_BFIN_WDT=y
CONFIG_HW_RANDOM=y
# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
@@ -872,21 +826,24 @@
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_TINY_USB is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
+# CONFIG_DS1682 is not set
# CONFIG_SENSORS_AD5252 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCF8575 is not set
-# CONFIG_SENSORS_PCA9543 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
@@ -909,14 +866,11 @@
#
# CONFIG_SPI_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
-
-#
-# Dallas's 1-wire bus
-#
+# CONFIG_SPI_TLE62X0 is not set
# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
@@ -924,12 +878,12 @@
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_FSCHER is not set
-# CONFIG_SENSORS_FSCPOS is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
@@ -944,13 +898,16 @@
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
@@ -960,6 +917,25 @@
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_BFIN_WDT=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
# Multifunction device drivers
@@ -972,23 +948,20 @@
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
#
# Graphics support
#
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
# CONFIG_FB_DDC is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
@@ -1003,18 +976,24 @@
#
# Frame buffer hardware drivers
#
-# CONFIG_FB_BFIN_7171 is not set
-# CONFIG_FB_BFIN_7393 is not set
CONFIG_FB_BF54X_LQ043=y
# CONFIG_FB_BFIN_T350MCQB is not set
+# CONFIG_FB_BFIN_7393 is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
#
# Console display driver support
#
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_FONTS=y
# CONFIG_FONT_8x8 is not set
@@ -1065,10 +1044,21 @@
# CONFIG_SND_MPU401 is not set
#
+# SPI devices
+#
+
+#
# ALSA Blackfin devices
#
# CONFIG_SND_BLACKFIN_AD1836 is not set
# CONFIG_SND_BFIN_AD73311 is not set
+# CONFIG_SND_BFIN_AD73322 is not set
+
+#
+# USB devices
+#
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
#
# System on Chip audio support
@@ -1084,6 +1074,10 @@
CONFIG_SND_BF5XX_SPORT_NUM=0
CONFIG_SND_BF5XX_HAVE_COLD_RESET=y
CONFIG_SND_BF5XX_RESET_GPIO_NUM=19
+
+#
+# SoC Audio support for SuperH
+#
CONFIG_SND_SOC_AD1980=y
#
@@ -1091,30 +1085,130 @@
#
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=y
-
-#
-# HID Devices
-#
-CONFIG_HID=m
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
#
-# USB support
+# USB Input Devices
#
+CONFIG_USB_HID=y
+# CONFIG_USB_HIDINPUT_POWERBOOK is not set
+# CONFIG_HID_FF is not set
+# CONFIG_USB_HIDDEV is not set
+CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
#
-# Enable Host or Gadget support to see Inventra options
+# Miscellaneous USB options
#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+CONFIG_USB_OTG_BLACKLIST_HUB=y
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_SOC=y
+
+#
+# Blackfin high speed USB support
+#
+CONFIG_USB_MUSB_HOST=y
+# CONFIG_USB_MUSB_PERIPHERAL is not set
+# CONFIG_USB_MUSB_OTG is not set
+CONFIG_USB_MUSB_HDRC_HCD=y
+# CONFIG_MUSB_PIO_ONLY is not set
+# CONFIG_USB_INVENTRA_DMA is not set
+# CONFIG_USB_TI_CPPI_DMA is not set
+CONFIG_USB_MUSB_LOGLEVEL=0
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
+# may also be needed; see USB_STORAGE Help for more information
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_DPCM is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+CONFIG_USB_MON=y
+
+#
+# USB port drivers
+#
+
+#
+# USB Serial Converter support
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGET is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+
+#
+# USB DSL modem support
+#
+
+#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
@@ -1126,37 +1220,17 @@
# MMC/SD Card Drivers
#
CONFIG_MMC_BLOCK=m
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
#
# MMC/SD Host Controller Drivers
#
CONFIG_SDH_BFIN=m
+# CONFIG_SDH_BFIN_MISSING_CMD_PULLUP_WORKAROUND is not set
+# CONFIG_MMC_SPI is not set
# CONFIG_SPI_MMC is not set
-
-#
-# LED devices
-#
# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
@@ -1176,6 +1250,7 @@
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
@@ -1183,6 +1258,7 @@
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
#
# SPI RTC drivers
@@ -1194,8 +1270,10 @@
# Platform RTC drivers
#
# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
@@ -1204,22 +1282,9 @@
CONFIG_RTC_DRV_BFIN=y
#
-# DMA Engine support
+# Userspace I/O
#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# PBX support
-#
-# CONFIG_PBX is not set
+# CONFIG_UIO is not set
#
# File systems
@@ -1280,7 +1345,6 @@
CONFIG_SYSFS=y
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set
#
@@ -1306,10 +1370,12 @@
CONFIG_JFFS2_FS=m
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
# CONFIG_JFFS2_SUMMARY is not set
# CONFIG_JFFS2_FS_XATTR is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
# CONFIG_CRAMFS is not set
@@ -1318,10 +1384,7 @@
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
@@ -1352,7 +1415,6 @@
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
#
# Partition Types
@@ -1375,10 +1437,6 @@
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
-
-#
-# Native Language Support
-#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
@@ -1419,21 +1477,16 @@
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
-
-#
-# Distributed Lock Manager
-#
# CONFIG_DLM is not set
-
-#
-# Profiling support
-#
+CONFIG_INSTRUMENTATION=y
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
@@ -1441,6 +1494,7 @@
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_SAMPLES is not set
CONFIG_DEBUG_MMRS=y
CONFIG_DEBUG_HUNT_FOR_ZERO=y
CONFIG_DEBUG_BFIN_HWTRACE_ON=y
@@ -1460,11 +1514,8 @@
# CONFIG_KEYS is not set
CONFIG_SECURITY=y
# CONFIG_SECURITY_NETWORK is not set
-CONFIG_SECURITY_CAPABILITIES=m
-
-#
-# Cryptographic options
-#
+# CONFIG_SECURITY_CAPABILITIES is not set
+# CONFIG_SECURITY_ROOTPLUG is not set
# CONFIG_CRYPTO is not set
#
@@ -1475,6 +1526,7 @@
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/blackfin/configs/IP0X_defconfig b/arch/blackfin/configs/IP0X_defconfig
index 5f6ff04..4384a67 100644
--- a/arch/blackfin/configs/IP0X_defconfig
+++ b/arch/blackfin/configs/IP0X_defconfig
@@ -212,7 +212,7 @@
#
# Memory Setup
#
-CONFIG_MEM_SIZE=64
+CONFIG_MAX_MEM_SIZE=64
CONFIG_MEM_ADD_WIDTH=10
#
diff --git a/arch/blackfin/kernel/bfin_dma_5xx.c b/arch/blackfin/kernel/bfin_dma_5xx.c
index fd5448d..d54f190 100644
--- a/arch/blackfin/kernel/bfin_dma_5xx.c
+++ b/arch/blackfin/kernel/bfin_dma_5xx.c
@@ -90,6 +90,17 @@
{
pr_debug("request_dma() : BEGIN \n");
+
+#if defined(CONFIG_BF561) && ANOMALY_05000182
+ if (channel >= CH_IMEM_STREAM0_DEST && channel <= CH_IMEM_STREAM1_DEST) {
+ if (get_cclk() > 500000000) {
+ printk(KERN_WARNING
+ "Request IMDMA failed due to ANOMALY 05000182\n");
+ return -EFAULT;
+ }
+ }
+#endif
+
mutex_lock(&(dma_ch[channel].dmalock));
if ((dma_ch[channel].chan_status == DMA_CHANNEL_REQUESTED)
diff --git a/arch/blackfin/kernel/bfin_gpio.c b/arch/blackfin/kernel/bfin_gpio.c
index 7e8eaf4..b6d89d1 100644
--- a/arch/blackfin/kernel/bfin_gpio.c
+++ b/arch/blackfin/kernel/bfin_gpio.c
@@ -1130,6 +1130,25 @@
#else
+int gpio_get_value(unsigned gpio)
+{
+ unsigned long flags;
+ int ret;
+
+ if (unlikely(get_gpio_edge(gpio))) {
+ local_irq_save(flags);
+ set_gpio_edge(gpio, 0);
+ ret = get_gpio_data(gpio);
+ set_gpio_edge(gpio, 1);
+ local_irq_restore(flags);
+
+ return ret;
+ } else
+ return get_gpio_data(gpio);
+}
+EXPORT_SYMBOL(gpio_get_value);
+
+
int gpio_direction_input(unsigned gpio)
{
unsigned long flags;
diff --git a/arch/blackfin/kernel/bfin_ksyms.c b/arch/blackfin/kernel/bfin_ksyms.c
index 053edff..4367330 100644
--- a/arch/blackfin/kernel/bfin_ksyms.c
+++ b/arch/blackfin/kernel/bfin_ksyms.c
@@ -90,7 +90,9 @@
EXPORT_SYMBOL(outsb);
EXPORT_SYMBOL(insb);
EXPORT_SYMBOL(outsw);
+EXPORT_SYMBOL(outsw_8);
EXPORT_SYMBOL(insw);
+EXPORT_SYMBOL(insw_8);
EXPORT_SYMBOL(outsl);
EXPORT_SYMBOL(insl);
EXPORT_SYMBOL(insl_16);
diff --git a/arch/blackfin/kernel/gptimers.c b/arch/blackfin/kernel/gptimers.c
index e698554..3a3e961 100644
--- a/arch/blackfin/kernel/gptimers.c
+++ b/arch/blackfin/kernel/gptimers.c
@@ -10,8 +10,8 @@
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/io.h>
-#include <asm/io.h>
#include <asm/blackfin.h>
#include <asm/gptimers.h>
diff --git a/arch/blackfin/kernel/init_task.c b/arch/blackfin/kernel/init_task.c
index c640154..6bdba7b 100644
--- a/arch/blackfin/kernel/init_task.c
+++ b/arch/blackfin/kernel/init_task.c
@@ -34,7 +34,6 @@
#include <linux/fs.h>
static struct fs_struct init_fs = INIT_FS;
-static struct files_struct init_files = INIT_FILES;
static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c
index 5b84707..f061f51 100644
--- a/arch/blackfin/kernel/traps.c
+++ b/arch/blackfin/kernel/traps.c
@@ -67,7 +67,7 @@
CSYNC();
}
-void *saved_icplb_fault_addr, *saved_dcplb_fault_addr;
+unsigned long saved_icplb_fault_addr, saved_dcplb_fault_addr;
int kstack_depth_to_print = 48;
@@ -364,13 +364,13 @@
/* 0x27 - Data CPLB Multiple Hits - Linux Trap Zero, handled here */
case VEC_CPLB_MHIT:
info.si_code = ILL_CPLB_MULHIT;
-#ifdef CONFIG_DEBUG_HUNT_FOR_ZERO
sig = SIGSEGV;
- printk(KERN_NOTICE "NULL pointer access (probably)\n");
-#else
- sig = SIGILL;
- printk(KERN_NOTICE EXC_0x27(KERN_NOTICE));
+#ifdef CONFIG_DEBUG_HUNT_FOR_ZERO
+ if (saved_dcplb_fault_addr < FIXED_CODE_START)
+ printk(KERN_NOTICE "NULL pointer access\n");
+ else
#endif
+ printk(KERN_NOTICE EXC_0x27(KERN_NOTICE));
CHK_DEBUGGER_TRAP();
break;
/* 0x28 - Emulation Watchpoint, handled here */
@@ -419,13 +419,13 @@
/* 0x2D - Instruction CPLB Multiple Hits, handled here */
case VEC_CPLB_I_MHIT:
info.si_code = ILL_CPLB_MULHIT;
-#ifdef CONFIG_DEBUG_HUNT_FOR_ZERO
sig = SIGSEGV;
- printk(KERN_NOTICE "Jump to address 0 - 0x0fff\n");
-#else
- sig = SIGILL;
- printk(KERN_NOTICE EXC_0x2D(KERN_NOTICE));
+#ifdef CONFIG_DEBUG_HUNT_FOR_ZERO
+ if (saved_icplb_fault_addr < FIXED_CODE_START)
+ printk(KERN_NOTICE "Jump to NULL address\n");
+ else
#endif
+ printk(KERN_NOTICE EXC_0x2D(KERN_NOTICE));
CHK_DEBUGGER_TRAP();
break;
/* 0x2E - Illegal use of Supervisor Resource, handled here */
@@ -939,8 +939,6 @@
oops_in_progress = 1;
- printk(KERN_EMERG "DCPLB_FAULT_ADDR=%p\n", saved_dcplb_fault_addr);
- printk(KERN_EMERG "ICPLB_FAULT_ADDR=%p\n", saved_icplb_fault_addr);
dump_bfin_process(fp);
dump_bfin_mem(fp);
show_regs(fp);
diff --git a/arch/blackfin/lib/checksum.c b/arch/blackfin/lib/checksum.c
index 42768e0..5c87505 100644
--- a/arch/blackfin/lib/checksum.c
+++ b/arch/blackfin/lib/checksum.c
@@ -72,9 +72,9 @@
* This is a version of ip_compute_csum() optimized for IP headers,
* which always checksum on 4 octet boundaries.
*/
-unsigned short ip_fast_csum(unsigned char *iph, unsigned int ihl)
+__sum16 ip_fast_csum(unsigned char *iph, unsigned int ihl)
{
- return ~do_csum(iph, ihl * 4);
+ return (__force __sum16)~do_csum(iph, ihl * 4);
}
/*
@@ -89,7 +89,7 @@
*
* it's best to have buff aligned on a 32-bit boundary
*/
-unsigned int csum_partial(const unsigned char *buff, int len, unsigned int sum)
+__wsum csum_partial(const void *buff, int len, __wsum sum)
{
/*
* Just in case we get nasty checksum data...
@@ -109,22 +109,22 @@
* this routine is used for miscellaneous IP-like checksums, mainly
* in icmp.c
*/
-unsigned short ip_compute_csum(const unsigned char *buff, int len)
+__sum16 ip_compute_csum(const void *buff, int len)
{
- return ~do_csum(buff, len);
+ return (__force __sum16)~do_csum(buff, len);
}
/*
* copy from fs while checksumming, otherwise like csum_partial
*/
-unsigned int
-csum_partial_copy_from_user(const unsigned char *src, unsigned char *dst,
- int len, int sum, int *csum_err)
+__wsum
+csum_partial_copy_from_user(const void __user *src, void *dst,
+ int len, __wsum sum, int *csum_err)
{
if (csum_err)
*csum_err = 0;
- memcpy(dst, src, len);
+ memcpy(dst, (__force void *)src, len);
return csum_partial(dst, len, sum);
}
@@ -132,8 +132,7 @@
* copy from ds while checksumming, otherwise like csum_partial
*/
-unsigned int csum_partial_copy(const unsigned char *src, unsigned char *dst,
- int len, int sum)
+__wsum csum_partial_copy(const void *src, void *dst, int len, __wsum sum)
{
memcpy(dst, src, len);
return csum_partial(dst, len, sum);
diff --git a/arch/blackfin/lib/ins.S b/arch/blackfin/lib/ins.S
index df7b883..eba2343 100644
--- a/arch/blackfin/lib/ins.S
+++ b/arch/blackfin/lib/ins.S
@@ -7,7 +7,7 @@
* Description: Implementation of ins{bwl} for BlackFin processors using zero overhead loops.
*
* Modified:
- * Copyright 2004-2006 Analog Devices Inc.
+ * Copyright 2004-2008 Analog Devices Inc.
* Copyright (C) 2005 Bas Vermeulen, BuyWays BV <bas@buyways.nl>
*
* Bugs: Enter bugs at http://blackfin.uclinux.org/
@@ -63,6 +63,23 @@
RTS;
ENDPROC(_insw)
+ENTRY(_insw_8)
+ P0 = R0; /* P0 = port */
+ cli R3;
+ P1 = R1; /* P1 = address */
+ P2 = R2; /* P2 = count */
+ SSYNC;
+ LSETUP( .Lword8_loop_s, .Lword8_loop_e) LC0 = P2;
+.Lword8_loop_s: R0 = W[P0];
+ B[P1++] = R0;
+ R0 = R0 >> 8;
+ B[P1++] = R0;
+ NOP;
+.Lword8_loop_e: NOP;
+ sti R3;
+ RTS;
+ENDPROC(_insw_8)
+
ENTRY(_insb)
P0 = R0; /* P0 = port */
cli R3;
@@ -78,8 +95,6 @@
RTS;
ENDPROC(_insb)
-
-
ENTRY(_insl_16)
P0 = R0; /* P0 = port */
cli R3;
diff --git a/arch/blackfin/lib/outs.S b/arch/blackfin/lib/outs.S
index 4c3da8a..4685b7a 100644
--- a/arch/blackfin/lib/outs.S
+++ b/arch/blackfin/lib/outs.S
@@ -7,7 +7,7 @@
* Description: Implementation of outs{bwl} for BlackFin processors using zero overhead loops.
*
* Modified: Copyright (C) 2005 Bas Vermeulen, BuyWays BV <bas@buyways.nl>
- * Copyright 2004-2006 Analog Devices Inc.
+ * Copyright 2004-2008 Analog Devices Inc.
*
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
@@ -63,3 +63,17 @@
.Lbyte_loop_e: B[P0] = R0;
RTS;
ENDPROC(_outsb)
+
+ENTRY(_outsw_8)
+ P0 = R0; /* P0 = port */
+ P1 = R1; /* P1 = address */
+ P2 = R2; /* P2 = count */
+
+ LSETUP( .Lword8_loop_s, .Lword8_loop_e) LC0 = P2;
+.Lword8_loop_s: R1 = B[P1++];
+ R0 = B[P1++];
+ R0 = R0 << 8;
+ R0 = R0 + R1;
+.Lword8_loop_e: W[P0] = R0;
+ RTS;
+ENDPROC(_outsw_8)
diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c
index 8aa49f8..5958eec 100644
--- a/arch/blackfin/mach-bf527/boards/ezkit.c
+++ b/arch/blackfin/mach-bf527/boards/ezkit.c
@@ -451,9 +451,6 @@
};
#endif
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-/* all SPI peripherals info goes here */
-
#if defined(CONFIG_MTD_M25P80) \
|| defined(CONFIG_MTD_M25P80_MODULE)
static struct mtd_partition bfin_spi_flash_partitions[] = {
@@ -647,10 +644,10 @@
{
.modalias = "ad7877",
.platform_data = &bfin_ad7877_ts_info,
- .irq = IRQ_PF6,
+ .irq = IRQ_PF8,
.max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */
.bus_num = 0,
- .chip_select = 1,
+ .chip_select = 2,
.controller_data = &spi_ad7877_chip_info,
},
#endif
@@ -676,6 +673,7 @@
#endif
};
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
/* SPI controller data */
static struct bfin5xx_spi_master bfin_spi0_info = {
.num_chipselect = 8,
@@ -799,13 +797,11 @@
#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
{
I2C_BOARD_INFO("pcf8574_lcd", 0x22),
- .type = "pcf8574_lcd",
},
#endif
#if defined(CONFIG_TWI_KEYPAD) || defined(CONFIG_TWI_KEYPAD_MODULE)
{
I2C_BOARD_INFO("pcf8574_keypad", 0x27),
- .type = "pcf8574_keypad",
.irq = IRQ_PF8,
},
#endif
@@ -1020,10 +1016,7 @@
#endif
platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
- spi_register_board_info(bfin_spi_board_info,
- ARRAY_SIZE(bfin_spi_board_info));
-#endif
+ spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c
index 9d28415..079389c 100644
--- a/arch/blackfin/mach-bf533/boards/ezkit.c
+++ b/arch/blackfin/mach-bf533/boards/ezkit.c
@@ -87,9 +87,6 @@
};
#endif
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-/* all SPI peripherals info goes here */
-
#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
@@ -189,6 +186,7 @@
#endif
};
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
/* SPI (0) */
static struct resource bfin_spi0_resource[] = {
[0] = {
@@ -425,9 +423,7 @@
{
printk(KERN_INFO "%s(): registering device resources\n", __func__);
platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices));
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
-#endif
#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c
index 7fd35fb..13ae495 100644
--- a/arch/blackfin/mach-bf533/boards/stamp.c
+++ b/arch/blackfin/mach-bf533/boards/stamp.c
@@ -111,7 +111,7 @@
};
#endif
-#if defined(CONFIG_MTD_BF5xx) || defined(CONFIG_MTD_BF5xx_MODULE)
+#if defined(CONFIG_MTD_BFIN_ASYNC) || defined(CONFIG_MTD_BFIN_ASYNC_MODULE)
static struct mtd_partition stamp_partitions[] = {
{
.name = "Bootloader",
@@ -141,13 +141,17 @@
.end = 0x203fffff,
.flags = IORESOURCE_MEM,
}, {
- .start = CONFIG_ENET_FLASH_PIN,
+ .start = 0x7BB07BB0, /* AMBCTL0 setting when accessing flash */
+ .end = 0x7BB07BB0, /* AMBCTL1 setting when accessing flash */
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = GPIO_PF0,
.flags = IORESOURCE_IRQ,
}
};
static struct platform_device stamp_flash_device = {
- .name = "BF5xx-Flash",
+ .name = "bfin-async-flash",
.id = 0,
.dev = {
.platform_data = &stamp_flash_data,
@@ -157,9 +161,6 @@
};
#endif
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-/* all SPI peripherals info goes here */
-
#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
static struct mtd_partition bfin_spi_flash_partitions[] = {
{
@@ -316,6 +317,7 @@
#endif
};
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
/* SPI (0) */
static struct resource bfin_spi0_resource[] = {
[0] = {
@@ -595,7 +597,7 @@
&bfin_gpios_device,
-#if defined(CONFIG_MTD_BF5xx) || defined(CONFIG_MTD_BF5xx_MODULE)
+#if defined(CONFIG_MTD_BFIN_ASYNC) || defined(CONFIG_MTD_BFIN_ASYNC_MODULE)
&stamp_flash_device,
#endif
};
@@ -617,15 +619,13 @@
#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
/* setup BF533_STAMP CPLD to route AMS3 to Ethernet MAC */
- bfin_write_FIO_DIR(bfin_read_FIO_DIR() | (1 << CONFIG_ENET_FLASH_PIN));
- bfin_write_FIO_FLAG_S(1 << CONFIG_ENET_FLASH_PIN);
+ bfin_write_FIO_DIR(bfin_read_FIO_DIR() | PF0);
+ bfin_write_FIO_FLAG_S(PF0);
SSYNC();
#endif
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
- spi_register_board_info(bfin_spi_board_info,
- ARRAY_SIZE(bfin_spi_board_info));
-#endif
+ spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+
#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
#endif
@@ -636,8 +636,8 @@
void native_machine_restart(char *cmd)
{
-#define BIT_TO_SET (1 << CONFIG_ENET_FLASH_PIN)
- bfin_write_FIO_INEN(~BIT_TO_SET);
- bfin_write_FIO_DIR(BIT_TO_SET);
- bfin_write_FIO_FLAG_C(BIT_TO_SET);
+ /* workaround pull up on cpld / flash pin not being strong enough */
+ bfin_write_FIO_INEN(~PF0);
+ bfin_write_FIO_DIR(PF0);
+ bfin_write_FIO_FLAG_C(PF0);
}
diff --git a/arch/blackfin/mach-bf537/boards/Makefile b/arch/blackfin/mach-bf537/boards/Makefile
index 87e450f..c94f7a5 100644
--- a/arch/blackfin/mach-bf537/boards/Makefile
+++ b/arch/blackfin/mach-bf537/boards/Makefile
@@ -3,7 +3,7 @@
#
obj-$(CONFIG_GENERIC_BF537_BOARD) += generic_board.o
-obj-$(CONFIG_BFIN537_STAMP) += stamp.o led.o
+obj-$(CONFIG_BFIN537_STAMP) += stamp.o
obj-$(CONFIG_BFIN537_BLUETECHNIX_CM) += cm_bf537.o
obj-$(CONFIG_PNAV10) += pnav10.o
obj-$(CONFIG_CAMSIG_MINOTAUR) += minotaur.o
diff --git a/arch/blackfin/mach-bf537/boards/led.S b/arch/blackfin/mach-bf537/boards/led.S
deleted file mode 100644
index 4e9ea42..0000000
--- a/arch/blackfin/mach-bf537/boards/led.S
+++ /dev/null
@@ -1,183 +0,0 @@
-/****************************************************
- * LED1 ---- PF6 LED2 ---- PF7 *
- * LED3 ---- PF8 LED4 ---- PF9 *
- * LED5 ---- PF10 LED6 ---- PF11 *
- ****************************************************/
-
-#include <linux/linkage.h>
-#include <asm/blackfin.h>
-
-/* All functions in this file save the registers they uses.
- So there is no need to save any registers before calling them. */
-
- .text;
-
-/* Initialize LEDs. */
-
-ENTRY(_led_init)
- LINK 12;
- [--SP] = P0;
- [--SP] = R0;
- [--SP] = R1;
- [--SP] = R2;
- R1 = PF6|PF7|PF8|PF9|PF10|PF11 (Z);
- R2 = ~R1;
-
- P0.H = hi(PORTF_FER);
- P0.L = lo(PORTF_FER);
- R0 = W[P0](Z);
- SSYNC;
- R0 = R0 & R2;
- W[P0] = R0.L;
- SSYNC;
-
- P0.H = hi(PORTFIO_DIR);
- P0.L = lo(PORTFIO_DIR);
- R0 = W[P0](Z);
- SSYNC;
- R0 = R0 | R1;
- W[P0] = R0.L;
- SSYNC;
-
- P0.H = hi(PORTFIO_INEN);
- P0.L = lo(PORTFIO_INEN);
- R0 = W[P0](Z);
- SSYNC;
- R0 = R0 & R2;
- W[P0] = R0.L;
- SSYNC;
-
- R2 = [SP++];
- R1 = [SP++];
- R0 = [SP++];
- P0 = [SP++];
- UNLINK;
- RTS;
- .size _led_init, .-_led_init
-
-/* Set one LED on. Leave other LEDs unchanged.
- It expects the LED number passed through R0. */
-
-ENTRY(_led_on)
- LINK 12;
- [--SP] = P0;
- [--SP] = R1;
- CALL _led_init;
- R1 = 1;
- R0 += 5;
- R1 <<= R0;
- P0.H = hi(PORTFIO);
- P0.L = lo(PORTFIO);
- R0 = W[P0](Z);
- SSYNC;
- R0 = R0 | R1;
- W[P0] = R0.L;
- SSYNC;
- R1 = [SP++];
- P0 = [SP++];
- UNLINK;
- RTS;
- .size _led_on, .-_led_on
-
-/* Set one LED off. Leave other LEDs unchanged. */
-
-ENTRY(_led_off)
- LINK 12;
- [--SP] = P0;
- [--SP] = R1;
- CALL _led_init;
- R1 = 1;
- R0 += 5;
- R1 <<= R0;
- R1 = ~R1;
- P0.H = hi(PORTFIO);
- P0.L = lo(PORTFIO);
- R0 = W[P0](Z);
- SSYNC;
- R0 = R0 & R1;
- W[P0] = R0.L;
- SSYNC;
- R1 = [SP++];
- P0 = [SP++];
- UNLINK;
- RTS;
- .size _led_off, .-_led_off
-
-/* Toggle one LED. Leave other LEDs unchanged. */
-
-ENTRY(_led_toggle)
- LINK 12;
- [--SP] = P0;
- [--SP] = R1;
- CALL _led_init;
- R1 = 1;
- R0 += 5;
- R1 <<= R0;
- P0.H = hi(PORTFIO);
- P0.L = lo(PORTFIO);
- R0 = W[P0](Z);
- SSYNC;
- R0 = R0 ^ R1;
- W[P0] = R0.L;
- SSYNC;
- R1 = [SP++];
- P0 = [SP++];
- UNLINK;
- RTS;
- .size _led_toggle, .-_led_toggle
-
-/* Display the number using LEDs in binary format. */
-
-ENTRY(_led_disp_num)
- LINK 12;
- [--SP] = P0;
- [--SP] = R1;
- [--SP] = R2;
- CALL _led_init;
- R1 = 0x3f(X);
- R0 = R0 & R1;
- R2 = 6(X);
- R0 <<= R2;
- R1 <<= R2;
- P0.H = hi(PORTFIO);
- P0.L = lo(PORTFIO);
- R2 = W[P0](Z);
- SSYNC;
- R1 = ~R1;
- R2 = R2 & R1;
- R2 = R2 | R0;
- W[P0] = R2.L;
- SSYNC;
- R2 = [SP++];
- R1 = [SP++];
- P0 = [SP++];
- UNLINK;
- RTS;
- .size _led_disp_num, .-_led_disp_num
-
-/* Toggle the number using LEDs in binary format. */
-
-ENTRY(_led_toggle_num)
- LINK 12;
- [--SP] = P0;
- [--SP] = R1;
- [--SP] = R2;
- CALL _led_init;
- R1 = 0x3f(X);
- R0 = R0 & R1;
- R1 = 6(X);
- R0 <<= R1;
- P0.H = hi(PORTFIO);
- P0.L = lo(PORTFIO);
- R1 = W[P0](Z);
- SSYNC;
- R1 = R1 ^ R0;
- W[P0] = R1.L;
- SSYNC;
- R2 = [SP++];
- R1 = [SP++];
- P0 = [SP++];
- UNLINK;
- RTS;
- .size _led_toggle_num, .-_led_toggle_num
-
diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c
index 9a756d1..671f9d6 100644
--- a/arch/blackfin/mach-bf537/boards/stamp.c
+++ b/arch/blackfin/mach-bf537/boards/stamp.c
@@ -400,9 +400,6 @@
};
#endif
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-/* all SPI peripherals info goes here */
-
#if defined(CONFIG_MTD_M25P80) \
|| defined(CONFIG_MTD_M25P80_MODULE)
static struct mtd_partition bfin_spi_flash_partitions[] = {
@@ -629,6 +626,7 @@
#endif
};
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
/* SPI controller data */
static struct bfin5xx_spi_master bfin_spi0_info = {
.num_chipselect = 8,
@@ -939,10 +937,7 @@
#endif
platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
- spi_register_board_info(bfin_spi_board_info,
- ARRAY_SIZE(bfin_spi_board_info));
-#endif
+ spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
diff --git a/arch/blackfin/mach-bf548/boards/Makefile b/arch/blackfin/mach-bf548/boards/Makefile
index eed161d..319ef54 100644
--- a/arch/blackfin/mach-bf548/boards/Makefile
+++ b/arch/blackfin/mach-bf548/boards/Makefile
@@ -2,5 +2,5 @@
# arch/blackfin/mach-bf548/boards/Makefile
#
-obj-$(CONFIG_BFIN548_EZKIT) += ezkit.o led.o
+obj-$(CONFIG_BFIN548_EZKIT) += ezkit.o
obj-$(CONFIG_BFIN548_BLUETECHNIX_CM) += cm_bf548.o
diff --git a/arch/blackfin/mach-bf548/boards/cm_bf548.c b/arch/blackfin/mach-bf548/boards/cm_bf548.c
index 3b74f96..4f4ae87 100644
--- a/arch/blackfin/mach-bf548/boards/cm_bf548.c
+++ b/arch/blackfin/mach-bf548/boards/cm_bf548.c
@@ -684,7 +684,7 @@
static int __init cm_bf548_init(void)
{
- printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__);
+ printk(KERN_INFO "%s(): registering device resources\n", __func__);
platform_add_devices(cm_bf548_devices, ARRAY_SIZE(cm_bf548_devices));
#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c
index d1682bb..af7c211 100644
--- a/arch/blackfin/mach-bf548/boards/ezkit.c
+++ b/arch/blackfin/mach-bf548/boards/ezkit.c
@@ -412,8 +412,6 @@
};
#endif
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
-/* all SPI peripherals info goes here */
#if defined(CONFIG_MTD_M25P80) \
|| defined(CONFIG_MTD_M25P80_MODULE)
/* SPI flash chip (m25p16) */
@@ -481,7 +479,7 @@
};
#endif
-static struct spi_board_info bf54x_spi_board_info[] __initdata = {
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
#if defined(CONFIG_MTD_M25P80) \
|| defined(CONFIG_MTD_M25P80_MODULE)
{
@@ -527,6 +525,7 @@
#endif
};
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
/* SPI (0) */
static struct resource bfin_spi0_resource[] = {
[0] = {
@@ -800,10 +799,7 @@
platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices));
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
- spi_register_board_info(bf54x_spi_board_info,
- ARRAY_SIZE(bf54x_spi_board_info));
-#endif
+ spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
return 0;
}
diff --git a/arch/blackfin/mach-bf548/boards/led.S b/arch/blackfin/mach-bf548/boards/led.S
deleted file mode 100644
index f47daf3..0000000
--- a/arch/blackfin/mach-bf548/boards/led.S
+++ /dev/null
@@ -1,172 +0,0 @@
-/****************************************************
- * LED1 ---- PG6 LED2 ---- PG7 *
- * LED3 ---- PG8 LED4 ---- PG9 *
- * LED5 ---- PG10 LED6 ---- PG11 *
- ****************************************************/
-
-#include <linux/linkage.h>
-#include <asm/blackfin.h>
-
-/* All functions in this file save the registers they uses.
- So there is no need to save any registers before calling them. */
-
- .text;
-
-/* Initialize LEDs. */
-
-ENTRY(_led_init)
- LINK 0;
- [--SP] = P0;
- [--SP] = R0;
- [--SP] = R1;
- [--SP] = R2;
- R1 = (PG6|PG7|PG8|PG9|PG10|PG11)(Z);
- R2 = ~R1;
-
- P0.H = hi(PORTG_FER);
- P0.L = lo(PORTG_FER);
- R0 = W[P0](Z);
- SSYNC;
- R0 = R0 & R2;
- W[P0] = R0.L;
- SSYNC;
-
- P0.H = hi(PORTG_DIR_SET);
- P0.L = lo(PORTG_DIR_SET);
- W[P0] = R1.L;
- SSYNC;
-
- P0.H = hi(PORTG_INEN);
- P0.L = lo(PORTG_INEN);
- R0 = W[P0](Z);
- SSYNC;
- R0 = R0 & R2;
- W[P0] = R0.L;
- SSYNC;
-
- R2 = [SP++];
- R1 = [SP++];
- R0 = [SP++];
- P0 = [SP++];
- RTS;
- .size _led_init, .-_led_init
-
-/* Set one LED on. Leave other LEDs unchanged.
- It expects the LED number passed through R0. */
-
-ENTRY(_led_on)
- LINK 0;
- [--SP] = P0;
- [--SP] = R1;
- CALL _led_init;
- R1 = 1;
- R0 += 5;
- R1 <<= R0;
- P0.H = hi(PORTG_SET);
- P0.L = lo(PORTG_SET);
- W[P0] = R1.L;
- SSYNC;
- R1 = [SP++];
- P0 = [SP++];
- UNLINK;
- RTS;
- .size _led_on, .-_led_on
-
-/* Set one LED off. Leave other LEDs unchanged. */
-
-ENTRY(_led_off)
- LINK 0;
- [--SP] = P0;
- [--SP] = R1;
- CALL _led_init;
- R1 = 1;
- R0 += 5;
- R1 <<= R0;
- P0.H = hi(PORTG_CLEAR);
- P0.L = lo(PORTG_CLEAR);
- W[P0] = R1.L;
- SSYNC;
- R1 = [SP++];
- P0 = [SP++];
- UNLINK;
- RTS;
- .size _led_off, .-_led_off
-
-/* Toggle one LED. Leave other LEDs unchanged. */
-
-ENTRY(_led_toggle)
- LINK 0;
- [--SP] = P0;
- [--SP] = R1;
- CALL _led_init;
- R1 = 1;
- R0 += 5;
- R1 <<= R0;
- P0.H = hi(PORTG);
- P0.L = lo(PORTG);
- R0 = W[P0](Z);
- SSYNC;
- R0 = R0 ^ R1;
- W[P0] = R0.L;
- SSYNC;
- R1 = [SP++];
- P0 = [SP++];
- UNLINK;
- RTS;
- .size _led_toggle, .-_led_toggle
-
-/* Display the number using LEDs in binary format. */
-
-ENTRY(_led_disp_num)
- LINK 0;
- [--SP] = P0;
- [--SP] = R1;
- [--SP] = R2;
- CALL _led_init;
- R1 = 0x3f(X);
- R0 = R0 & R1;
- R2 = 6(X);
- R0 <<= R2;
- R1 <<= R2;
- P0.H = hi(PORTG);
- P0.L = lo(PORTG);
- R2 = W[P0](Z);
- SSYNC;
- R1 = ~R1;
- R2 = R2 & R1;
- R2 = R2 | R0;
- W[P0] = R2.L;
- SSYNC;
- R2 = [SP++];
- R1 = [SP++];
- P0 = [SP++];
- UNLINK;
- RTS;
- .size _led_disp_num, .-_led_disp_num
-
-/* Toggle the number using LEDs in binary format. */
-
-ENTRY(_led_toggle_num)
- LINK 0;
- [--SP] = P0;
- [--SP] = R1;
- [--SP] = R2;
- CALL _led_init;
- R1 = 0x3f(X);
- R0 = R0 & R1;
- R1 = 6(X);
- R0 <<= R1;
- P0.H = hi(PORTG);
- P0.L = lo(PORTG);
- R1 = W[P0](Z);
- SSYNC;
- R1 = R1 ^ R0;
- W[P0] = R1.L;
- SSYNC;
- R2 = [SP++];
- R1 = [SP++];
- P0 = [SP++];
- UNLINK;
- RTS;
- .size _led_toggle_num, .-_led_toggle_num
-
diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c
index 61d8f76..bc6fede 100644
--- a/arch/blackfin/mach-bf561/boards/ezkit.c
+++ b/arch/blackfin/mach-bf561/boards/ezkit.c
@@ -280,7 +280,6 @@
};
#endif
-#ifdef CONFIG_SPI_BFIN
#if defined(CONFIG_SND_BLACKFIN_AD1836) \
|| defined(CONFIG_SND_BLACKFIN_AD1836_MODULE)
static struct bfin5xx_spi_chip ad1836_spi_chip_info = {
@@ -295,8 +294,8 @@
.bits_per_word = 8,
};
#endif
-#endif
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
/* SPI (0) */
static struct resource bfin_spi0_resource[] = {
[0] = {
@@ -327,6 +326,7 @@
.platform_data = &bfin_spi0_info, /* Passed to driver */
},
};
+#endif
static struct spi_board_info bfin_spi_board_info[] __initdata = {
#if defined(CONFIG_SND_BLACKFIN_AD1836) \
@@ -537,10 +537,7 @@
SSYNC();
#endif
-#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
- spi_register_board_info(bfin_spi_board_info,
- ARRAY_SIZE(bfin_spi_board_info));
-#endif
+ spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
diff --git a/arch/cris/kernel/process.c b/arch/cris/kernel/process.c
index ef2db8f..5933656 100644
--- a/arch/cris/kernel/process.c
+++ b/arch/cris/kernel/process.c
@@ -38,7 +38,6 @@
*/
static struct fs_struct init_fs = INIT_FS;
-static struct files_struct init_files = INIT_FILES;
static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
struct mm_struct init_mm = INIT_MM(init_mm);
diff --git a/arch/frv/kernel/cmode.S b/arch/frv/kernel/cmode.S
index 81ba28a..53deeb5 100644
--- a/arch/frv/kernel/cmode.S
+++ b/arch/frv/kernel/cmode.S
@@ -1,7 +1,7 @@
/* cmode.S: clock mode management
*
* Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
- * Written by David Woodhouse (dwmw2@redhat.com)
+ * Written by David Woodhouse (dwmw2@infradead.org)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
diff --git a/arch/frv/kernel/init_task.c b/arch/frv/kernel/init_task.c
index 2299393..e219881 100644
--- a/arch/frv/kernel/init_task.c
+++ b/arch/frv/kernel/init_task.c
@@ -11,7 +11,6 @@
static struct fs_struct init_fs = INIT_FS;
-static struct files_struct init_files = INIT_FILES;
static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
struct mm_struct init_mm = INIT_MM(init_mm);
diff --git a/arch/frv/kernel/sleep.S b/arch/frv/kernel/sleep.S
index c9b2d51..f67bf73 100644
--- a/arch/frv/kernel/sleep.S
+++ b/arch/frv/kernel/sleep.S
@@ -1,7 +1,7 @@
/* sleep.S: power saving mode entry
*
* Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
- * Written by David Woodhouse (dwmw2@redhat.com)
+ * Written by David Woodhouse (dwmw2@infradead.org)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
diff --git a/arch/frv/mb93090-mb00/pci-dma-nommu.c b/arch/frv/mb93090-mb00/pci-dma-nommu.c
index 4985466..64ee58d 100644
--- a/arch/frv/mb93090-mb00/pci-dma-nommu.c
+++ b/arch/frv/mb93090-mb00/pci-dma-nommu.c
@@ -1,7 +1,7 @@
/* pci-dma-nommu.c: Dynamic DMA mapping support for the FRV
*
* Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
- * Written by David Woodhouse (dwmw2@redhat.com)
+ * Written by David Woodhouse (dwmw2@infradead.org)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
diff --git a/arch/frv/mm/init.c b/arch/frv/mm/init.c
index b841ecf..9af7740 100644
--- a/arch/frv/mm/init.c
+++ b/arch/frv/mm/init.c
@@ -26,6 +26,7 @@
#include <linux/types.h>
#include <linux/bootmem.h>
#include <linux/highmem.h>
+#include <linux/module.h>
#include <asm/setup.h>
#include <asm/segment.h>
@@ -56,7 +57,9 @@
*/
static unsigned long empty_bad_page_table;
static unsigned long empty_bad_page;
+
unsigned long empty_zero_page;
+EXPORT_SYMBOL(empty_zero_page);
/*****************************************************************************/
/*
diff --git a/arch/h8300/kernel/init_task.c b/arch/h8300/kernel/init_task.c
index 19272c2..93a4899 100644
--- a/arch/h8300/kernel/init_task.c
+++ b/arch/h8300/kernel/init_task.c
@@ -13,7 +13,6 @@
#include <asm/pgtable.h>
static struct fs_struct init_fs = INIT_FS;
-static struct files_struct init_files = INIT_FILES;
static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
struct mm_struct init_mm = INIT_MM(init_mm);
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 0df5f6f..16be414 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -135,6 +135,7 @@
HP-zx1/sx1000 For HP systems
HP-zx1/sx1000+swiotlb For HP systems with (broken) DMA-constrained devices.
SGI-SN2 For SGI Altix systems
+ SGI-UV For SGI UV systems
Ski-simulator For the HP simulator <http://www.hpl.hp.com/research/linux/ski/>
If you don't know what to do, choose "generic".
@@ -170,6 +171,18 @@
to select this option. If in doubt, select ia64 generic support
instead.
+config IA64_SGI_UV`
+ bool "SGI-UV`"
+ select NUMA
+ select ACPI_NUMA
+ select SWIOTLB
+ help
+ Selecting this option will optimize the kernel for use on UV based
+ systems, but the resulting kernel binary will not run on other
+ types of ia64 systems. If you have an SGI UV system, it's safe
+ to select this option. If in doubt, select ia64 generic support
+ instead.
+
config IA64_HP_SIM
bool "Ski-simulator"
select SWIOTLB
diff --git a/arch/ia64/Makefile b/arch/ia64/Makefile
index ec4cca4..88f1a55 100644
--- a/arch/ia64/Makefile
+++ b/arch/ia64/Makefile
@@ -63,7 +63,7 @@
drivers-$(CONFIG_IA64_HP_SIM) += arch/ia64/hp/sim/
drivers-$(CONFIG_IA64_HP_ZX1) += arch/ia64/hp/common/ arch/ia64/hp/zx1/
drivers-$(CONFIG_IA64_HP_ZX1_SWIOTLB) += arch/ia64/hp/common/ arch/ia64/hp/zx1/
-drivers-$(CONFIG_IA64_GENERIC) += arch/ia64/hp/common/ arch/ia64/hp/zx1/ arch/ia64/hp/sim/ arch/ia64/sn/
+drivers-$(CONFIG_IA64_GENERIC) += arch/ia64/hp/common/ arch/ia64/hp/zx1/ arch/ia64/hp/sim/ arch/ia64/sn/ arch/ia64/uv/
drivers-$(CONFIG_OPROFILE) += arch/ia64/oprofile/
boot := arch/ia64/hp/sim/boot
diff --git a/arch/ia64/ia32/ia32_support.c b/arch/ia64/ia32/ia32_support.c
index 896b1eb..a6965dd 100644
--- a/arch/ia64/ia32/ia32_support.c
+++ b/arch/ia64/ia32/ia32_support.c
@@ -15,7 +15,6 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/mm.h>
-#include <linux/personality.h>
#include <linux/sched.h>
#include <asm/intrinsics.h>
@@ -29,7 +28,6 @@
extern int die_if_kernel (char *str, struct pt_regs *regs, long err);
-struct exec_domain ia32_exec_domain;
struct page *ia32_shared_page[NR_CPUS];
unsigned long *ia32_boot_gdt;
unsigned long *cpu_gdt_table[NR_CPUS];
@@ -240,14 +238,6 @@
static int __init
ia32_init (void)
{
- ia32_exec_domain.name = "Linux/x86";
- ia32_exec_domain.handler = NULL;
- ia32_exec_domain.pers_low = PER_LINUX32;
- ia32_exec_domain.pers_high = PER_LINUX32;
- ia32_exec_domain.signal_map = default_exec_domain.signal_map;
- ia32_exec_domain.signal_invmap = default_exec_domain.signal_invmap;
- register_exec_domain(&ia32_exec_domain);
-
#if PAGE_SHIFT > IA32_PAGE_SHIFT
{
extern struct kmem_cache *ia64_partial_page_cachep;
diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c
index 19709a0..43687cc 100644
--- a/arch/ia64/kernel/acpi.c
+++ b/arch/ia64/kernel/acpi.c
@@ -117,7 +117,10 @@
if (!strcmp(hdr->oem_id, "HP")) {
return "hpzx1";
} else if (!strcmp(hdr->oem_id, "SGI")) {
- return "sn2";
+ if (!strcmp(hdr->oem_table_id + 4, "UV"))
+ return "uv";
+ else
+ return "sn2";
}
return "dig";
@@ -130,6 +133,8 @@
return "hpzx1_swiotlb";
# elif defined (CONFIG_IA64_SGI_SN2)
return "sn2";
+# elif defined (CONFIG_IA64_SGI_UV)
+ return "uv";
# elif defined (CONFIG_IA64_DIG)
return "dig";
# else
@@ -460,7 +465,6 @@
printk(KERN_ERR
"ACPI 2.0 SLIT: size mismatch: %d expected, %d actual\n",
len, slit->header.length);
- memset(numa_slit, 10, sizeof(numa_slit));
return;
}
slit_table = slit;
@@ -569,8 +573,14 @@
printk(KERN_INFO "Number of memory chunks in system = %d\n",
num_node_memblks);
- if (!slit_table)
+ if (!slit_table) {
+ for (i = 0; i < MAX_NUMNODES; i++)
+ for (j = 0; j < MAX_NUMNODES; j++)
+ node_distance(i, j) = i == j ? LOCAL_DISTANCE :
+ REMOTE_DISTANCE;
return;
+ }
+
memset(numa_slit, -1, sizeof(numa_slit));
for (i = 0; i < slit_table->locality_count; i++) {
if (!pxm_bit_test(i))
@@ -622,6 +632,9 @@
if (acpi_irq_model == ACPI_IRQ_MODEL_PLATFORM)
return;
+ if (has_8259 && gsi < 16)
+ return;
+
iosapic_unregister_intr(gsi);
}
diff --git a/arch/ia64/kernel/entry.S b/arch/ia64/kernel/entry.S
index e49ad8c..ca2bb95 100644
--- a/arch/ia64/kernel/entry.S
+++ b/arch/ia64/kernel/entry.S
@@ -1156,6 +1156,9 @@
* r31 = current->thread_info->flags
* On exit:
* p6 = TRUE if work-pending-check needs to be redone
+ *
+ * Interrupts are disabled on entry, reenabled depend on work, and
+ * disabled on exit.
*/
.work_pending_syscall:
add r2=-8,r2
@@ -1164,16 +1167,16 @@
st8 [r2]=r8
st8 [r3]=r10
.work_pending:
- tbit.z p6,p0=r31,TIF_NEED_RESCHED // current_thread_info()->need_resched==0?
+ tbit.z p6,p0=r31,TIF_NEED_RESCHED // is resched not needed?
(p6) br.cond.sptk.few .notify
#ifdef CONFIG_PREEMPT
(pKStk) dep r21=-1,r0,PREEMPT_ACTIVE_BIT,1
;;
(pKStk) st4 [r20]=r21
- ssm psr.i // enable interrupts
#endif
+ ssm psr.i // enable interrupts
br.call.spnt.many rp=schedule
-.ret9: cmp.eq p6,p0=r0,r0 // p6 <- 1
+.ret9: cmp.eq p6,p0=r0,r0 // p6 <- 1 (re-check)
rsm psr.i // disable interrupts
;;
#ifdef CONFIG_PREEMPT
@@ -1182,13 +1185,13 @@
(pKStk) st4 [r20]=r0 // preempt_count() <- 0
#endif
(pLvSys)br.cond.sptk.few .work_pending_syscall_end
- br.cond.sptk.many .work_processed_kernel // re-check
+ br.cond.sptk.many .work_processed_kernel
.notify:
(pUStk) br.call.spnt.many rp=notify_resume_user
-.ret10: cmp.ne p6,p0=r0,r0 // p6 <- 0
+.ret10: cmp.ne p6,p0=r0,r0 // p6 <- 0 (don't re-check)
(pLvSys)br.cond.sptk.few .work_pending_syscall_end
- br.cond.sptk.many .work_processed_kernel // don't re-check
+ br.cond.sptk.many .work_processed_kernel
.work_pending_syscall_end:
adds r2=PT(R8)+16,r12
@@ -1196,7 +1199,7 @@
;;
ld8 r8=[r2]
ld8 r10=[r3]
- br.cond.sptk.many .work_processed_syscall // re-check
+ br.cond.sptk.many .work_processed_syscall
END(ia64_leave_kernel)
@@ -1234,9 +1237,12 @@
END(ia64_invoke_schedule_tail)
/*
- * Setup stack and call do_notify_resume_user(). Note that pSys and pNonSys need to
- * be set up by the caller. We declare 8 input registers so the system call
- * args get preserved, in case we need to restart a system call.
+ * Setup stack and call do_notify_resume_user(), keeping interrupts
+ * disabled.
+ *
+ * Note that pSys and pNonSys need to be set up by the caller.
+ * We declare 8 input registers so the system call args get preserved,
+ * in case we need to restart a system call.
*/
ENTRY(notify_resume_user)
.prologue ASM_UNW_PRLG_RP|ASM_UNW_PRLG_PFS, ASM_UNW_PRLG_GRSAVE(8)
diff --git a/arch/ia64/kernel/init_task.c b/arch/ia64/kernel/init_task.c
index bc8efca..9d7e1c6 100644
--- a/arch/ia64/kernel/init_task.c
+++ b/arch/ia64/kernel/init_task.c
@@ -18,7 +18,6 @@
#include <asm/pgtable.h>
static struct fs_struct init_fs = INIT_FS;
-static struct files_struct init_files = INIT_FILES;
static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
struct mm_struct init_mm = INIT_MM(init_mm);
diff --git a/arch/ia64/kernel/ivt.S b/arch/ia64/kernel/ivt.S
index 6678c49..80b44ea 100644
--- a/arch/ia64/kernel/ivt.S
+++ b/arch/ia64/kernel/ivt.S
@@ -1076,48 +1076,6 @@
DBG_FAULT(15)
FAULT(15)
- /*
- * Squatting in this space ...
- *
- * This special case dispatcher for illegal operation faults allows preserved
- * registers to be modified through a callback function (asm only) that is handed
- * back from the fault handler in r8. Up to three arguments can be passed to the
- * callback function by returning an aggregate with the callback as its first
- * element, followed by the arguments.
- */
-ENTRY(dispatch_illegal_op_fault)
- .prologue
- .body
- SAVE_MIN_WITH_COVER
- ssm psr.ic | PSR_DEFAULT_BITS
- ;;
- srlz.i // guarantee that interruption collection is on
- ;;
-(p15) ssm psr.i // restore psr.i
- adds r3=8,r2 // set up second base pointer for SAVE_REST
- ;;
- alloc r14=ar.pfs,0,0,1,0 // must be first in insn group
- mov out0=ar.ec
- ;;
- SAVE_REST
- PT_REGS_UNWIND_INFO(0)
- ;;
- br.call.sptk.many rp=ia64_illegal_op_fault
-.ret0: ;;
- alloc r14=ar.pfs,0,0,3,0 // must be first in insn group
- mov out0=r9
- mov out1=r10
- mov out2=r11
- movl r15=ia64_leave_kernel
- ;;
- mov rp=r15
- mov b6=r8
- ;;
- cmp.ne p6,p0=0,r8
-(p6) br.call.dpnt.many b6=b6 // call returns to ia64_leave_kernel
- br.sptk.many ia64_leave_kernel
-END(dispatch_illegal_op_fault)
-
.org ia64_ivt+0x4000
/////////////////////////////////////////////////////////////////////////////////////////
// 0x4000 Entry 16 (size 64 bundles) Reserved
@@ -1715,6 +1673,48 @@
DBG_FAULT(67)
FAULT(67)
+ /*
+ * Squatting in this space ...
+ *
+ * This special case dispatcher for illegal operation faults allows preserved
+ * registers to be modified through a callback function (asm only) that is handed
+ * back from the fault handler in r8. Up to three arguments can be passed to the
+ * callback function by returning an aggregate with the callback as its first
+ * element, followed by the arguments.
+ */
+ENTRY(dispatch_illegal_op_fault)
+ .prologue
+ .body
+ SAVE_MIN_WITH_COVER
+ ssm psr.ic | PSR_DEFAULT_BITS
+ ;;
+ srlz.i // guarantee that interruption collection is on
+ ;;
+(p15) ssm psr.i // restore psr.i
+ adds r3=8,r2 // set up second base pointer for SAVE_REST
+ ;;
+ alloc r14=ar.pfs,0,0,1,0 // must be first in insn group
+ mov out0=ar.ec
+ ;;
+ SAVE_REST
+ PT_REGS_UNWIND_INFO(0)
+ ;;
+ br.call.sptk.many rp=ia64_illegal_op_fault
+.ret0: ;;
+ alloc r14=ar.pfs,0,0,3,0 // must be first in insn group
+ mov out0=r9
+ mov out1=r10
+ mov out2=r11
+ movl r15=ia64_leave_kernel
+ ;;
+ mov rp=r15
+ mov b6=r8
+ ;;
+ cmp.ne p6,p0=0,r8
+(p6) br.call.dpnt.many b6=b6 // call returns to ia64_leave_kernel
+ br.sptk.many ia64_leave_kernel
+END(dispatch_illegal_op_fault)
+
#ifdef CONFIG_IA32_SUPPORT
/*
diff --git a/arch/ia64/kernel/minstate.h b/arch/ia64/kernel/minstate.h
index 7c548ac..74b6d67 100644
--- a/arch/ia64/kernel/minstate.h
+++ b/arch/ia64/kernel/minstate.h
@@ -15,6 +15,9 @@
#define ACCOUNT_SYS_ENTER
#endif
+.section ".data.patch.rse", "a"
+.previous
+
/*
* DO_SAVE_MIN switches to the kernel stacks (if necessary) and saves
* the minimum state necessary that allows us to turn psr.ic back
@@ -40,7 +43,7 @@
* Note that psr.ic is NOT turned on by this macro. This is so that
* we can pass interruption state as arguments to a handler.
*/
-#define DO_SAVE_MIN(COVER,SAVE_IFS,EXTRA) \
+#define DO_SAVE_MIN(COVER,SAVE_IFS,EXTRA,WORKAROUND) \
mov r16=IA64_KR(CURRENT); /* M */ \
mov r27=ar.rsc; /* M */ \
mov r20=r1; /* A */ \
@@ -87,6 +90,7 @@
tbit.nz p15,p0=r29,IA64_PSR_I_BIT; \
mov r29=b0 \
;; \
+ WORKAROUND; \
adds r16=PT(R8),r1; /* initialize first base pointer */ \
adds r17=PT(R9),r1; /* initialize second base pointer */ \
(pKStk) mov r18=r0; /* make sure r18 isn't NaT */ \
@@ -206,6 +210,40 @@
st8 [r25]=r10; /* ar.ssd */ \
;;
-#define SAVE_MIN_WITH_COVER DO_SAVE_MIN(cover, mov r30=cr.ifs,)
-#define SAVE_MIN_WITH_COVER_R19 DO_SAVE_MIN(cover, mov r30=cr.ifs, mov r15=r19)
-#define SAVE_MIN DO_SAVE_MIN( , mov r30=r0, )
+#define RSE_WORKAROUND \
+(pUStk) extr.u r17=r18,3,6; \
+(pUStk) sub r16=r18,r22; \
+[1:](pKStk) br.cond.sptk.many 1f; \
+ .xdata4 ".data.patch.rse",1b-. \
+ ;; \
+ cmp.ge p6,p7 = 33,r17; \
+ ;; \
+(p6) mov r17=0x310; \
+(p7) mov r17=0x308; \
+ ;; \
+ cmp.leu p1,p0=r16,r17; \
+(p1) br.cond.sptk.many 1f; \
+ dep.z r17=r26,0,62; \
+ movl r16=2f; \
+ ;; \
+ mov ar.pfs=r17; \
+ dep r27=r0,r27,16,14; \
+ mov b0=r16; \
+ ;; \
+ br.ret.sptk b0; \
+ ;; \
+2: \
+ mov ar.rsc=r0 \
+ ;; \
+ flushrs; \
+ ;; \
+ mov ar.bspstore=r22 \
+ ;; \
+ mov r18=ar.bsp; \
+ ;; \
+1: \
+ .pred.rel "mutex", pKStk, pUStk
+
+#define SAVE_MIN_WITH_COVER DO_SAVE_MIN(cover, mov r30=cr.ifs, , RSE_WORKAROUND)
+#define SAVE_MIN_WITH_COVER_R19 DO_SAVE_MIN(cover, mov r30=cr.ifs, mov r15=r19, RSE_WORKAROUND)
+#define SAVE_MIN DO_SAVE_MIN( , mov r30=r0, , )
diff --git a/arch/ia64/kernel/palinfo.c b/arch/ia64/kernel/palinfo.c
index 4547a20..9dc00f7 100644
--- a/arch/ia64/kernel/palinfo.c
+++ b/arch/ia64/kernel/palinfo.c
@@ -900,12 +900,6 @@
palinfo_smp_call(void *info)
{
palinfo_smp_data_t *data = (palinfo_smp_data_t *)info;
- if (data == NULL) {
- printk(KERN_ERR "palinfo: data pointer is NULL\n");
- data->ret = 0; /* no output */
- return;
- }
- /* does this actual call */
data->ret = (*data->func)(data->page);
}
diff --git a/arch/ia64/kernel/patch.c b/arch/ia64/kernel/patch.c
index e0dca87..b83b2c5 100644
--- a/arch/ia64/kernel/patch.c
+++ b/arch/ia64/kernel/patch.c
@@ -115,6 +115,29 @@
ia64_srlz_i();
}
+/*
+ * Disable the RSE workaround by turning the conditional branch
+ * that we tagged in each place the workaround was used into an
+ * unconditional branch.
+ */
+void __init
+ia64_patch_rse (unsigned long start, unsigned long end)
+{
+ s32 *offp = (s32 *) start;
+ u64 ip, *b;
+
+ while (offp < (s32 *) end) {
+ ip = (u64) offp + *offp;
+
+ b = (u64 *)(ip & -16);
+ b[1] &= ~0xf800000L;
+ ia64_fc((void *) ip);
+ ++offp;
+ }
+ ia64_sync_i();
+ ia64_srlz_i();
+}
+
void __init
ia64_patch_mckinley_e9 (unsigned long start, unsigned long end)
{
diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c
index c1ad27d..71d0513 100644
--- a/arch/ia64/kernel/perfmon.c
+++ b/arch/ia64/kernel/perfmon.c
@@ -5013,12 +5013,13 @@
}
static int pfm_ovfl_notify_user(pfm_context_t *ctx, unsigned long ovfl_pmds);
+
/*
* pfm_handle_work() can be called with interrupts enabled
* (TIF_NEED_RESCHED) or disabled. The down_interruptible
* call may sleep, therefore we must re-enable interrupts
* to avoid deadlocks. It is safe to do so because this function
- * is called ONLY when returning to user level (PUStk=1), in which case
+ * is called ONLY when returning to user level (pUStk=1), in which case
* there is no risk of kernel stack overflow due to deep
* interrupt nesting.
*/
@@ -5034,7 +5035,8 @@
ctx = PFM_GET_CTX(current);
if (ctx == NULL) {
- printk(KERN_ERR "perfmon: [%d] has no PFM context\n", task_pid_nr(current));
+ printk(KERN_ERR "perfmon: [%d] has no PFM context\n",
+ task_pid_nr(current));
return;
}
@@ -5058,11 +5060,12 @@
/*
* must be done before we check for simple-reset mode
*/
- if (ctx->ctx_fl_going_zombie || ctx->ctx_state == PFM_CTX_ZOMBIE) goto do_zombie;
-
+ if (ctx->ctx_fl_going_zombie || ctx->ctx_state == PFM_CTX_ZOMBIE)
+ goto do_zombie;
//if (CTX_OVFL_NOBLOCK(ctx)) goto skip_blocking;
- if (reason == PFM_TRAP_REASON_RESET) goto skip_blocking;
+ if (reason == PFM_TRAP_REASON_RESET)
+ goto skip_blocking;
/*
* restore interrupt mask to what it was on entry.
@@ -5110,7 +5113,8 @@
/*
* in case of interruption of down() we don't restart anything
*/
- if (ret < 0) goto nothing_to_do;
+ if (ret < 0)
+ goto nothing_to_do;
skip_blocking:
pfm_resume_after_ovfl(ctx, ovfl_regs, regs);
diff --git a/arch/ia64/kernel/process.c b/arch/ia64/kernel/process.c
index 58dcfac..a3a34b4 100644
--- a/arch/ia64/kernel/process.c
+++ b/arch/ia64/kernel/process.c
@@ -167,11 +167,18 @@
clear_ti_thread_flag(task_thread_info(tsk), TIF_NOTIFY_RESUME);
}
+/*
+ * do_notify_resume_user():
+ * Called from notify_resume_user at entry.S, with interrupts disabled.
+ */
void
-do_notify_resume_user (sigset_t *unused, struct sigscratch *scr, long in_syscall)
+do_notify_resume_user(sigset_t *unused, struct sigscratch *scr, long in_syscall)
{
if (fsys_mode(current, &scr->pt)) {
- /* defer signal-handling etc. until we return to privilege-level 0. */
+ /*
+ * defer signal-handling etc. until we return to
+ * privilege-level 0.
+ */
if (!ia64_psr(&scr->pt)->lp)
ia64_psr(&scr->pt)->lp = 1;
return;
@@ -179,16 +186,26 @@
#ifdef CONFIG_PERFMON
if (current->thread.pfm_needs_checking)
+ /*
+ * Note: pfm_handle_work() allow us to call it with interrupts
+ * disabled, and may enable interrupts within the function.
+ */
pfm_handle_work();
#endif
/* deal with pending signal delivery */
- if (test_thread_flag(TIF_SIGPENDING))
+ if (test_thread_flag(TIF_SIGPENDING)) {
+ local_irq_enable(); /* force interrupt enable */
ia64_do_signal(scr, in_syscall);
+ }
/* copy user rbs to kernel rbs */
- if (unlikely(test_thread_flag(TIF_RESTORE_RSE)))
+ if (unlikely(test_thread_flag(TIF_RESTORE_RSE))) {
+ local_irq_enable(); /* force interrupt enable */
ia64_sync_krbs();
+ }
+
+ local_irq_disable(); /* force interrupt disable */
}
static int pal_halt = 1;
diff --git a/arch/ia64/kernel/sal.c b/arch/ia64/kernel/sal.c
index a3022dc..7e02597 100644
--- a/arch/ia64/kernel/sal.c
+++ b/arch/ia64/kernel/sal.c
@@ -229,6 +229,14 @@
*/
static int sal_cache_flush_drops_interrupts;
+static int __init
+force_pal_cache_flush(char *str)
+{
+ sal_cache_flush_drops_interrupts = 1;
+ return 0;
+}
+early_param("force_pal_cache_flush", force_pal_cache_flush);
+
void __init
check_sal_cache_flush (void)
{
@@ -237,6 +245,9 @@
u64 vector, cache_type = 3;
struct ia64_sal_retval isrv;
+ if (sal_cache_flush_drops_interrupts)
+ return;
+
cpu = get_cpu();
local_irq_save(flags);
diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c
index 5015ca1..f48a809 100644
--- a/arch/ia64/kernel/setup.c
+++ b/arch/ia64/kernel/setup.c
@@ -239,6 +239,25 @@
#ifdef CONFIG_KEXEC
+
+/*
+ * This function checks if the reserved crashkernel is allowed on the specific
+ * IA64 machine flavour. Machines without an IO TLB use swiotlb and require
+ * some memory below 4 GB (i.e. in 32 bit area), see the implementation of
+ * lib/swiotlb.c. The hpzx1 architecture has an IO TLB but cannot use that
+ * in kdump case. See the comment in sba_init() in sba_iommu.c.
+ *
+ * So, the only machvec that really supports loading the kdump kernel
+ * over 4 GB is "sn2".
+ */
+static int __init check_crashkernel_memory(unsigned long pbase, size_t size)
+{
+ if (ia64_platform_is("sn2") || ia64_platform_is("uv"))
+ return 1;
+ else
+ return pbase < (1UL << 32);
+}
+
static void __init setup_crashkernel(unsigned long total, int *n)
{
unsigned long long base = 0, size = 0;
@@ -252,6 +271,16 @@
base = kdump_find_rsvd_region(size,
rsvd_region, *n);
}
+
+ if (!check_crashkernel_memory(base, size)) {
+ pr_warning("crashkernel: There would be kdump memory "
+ "at %ld GB but this is unusable because it "
+ "must\nbe below 4 GB. Change the memory "
+ "configuration of the machine.\n",
+ (unsigned long)(base >> 30));
+ return;
+ }
+
if (base != ~0UL) {
printk(KERN_INFO "Reserving %ldMB of memory at %ldMB "
"for crashkernel (System RAM: %ldMB)\n",
@@ -531,6 +560,17 @@
/* process SAL system table: */
ia64_sal_init(__va(efi.sal_systab));
+#ifdef CONFIG_ITANIUM
+ ia64_patch_rse((u64) __start___rse_patchlist, (u64) __end___rse_patchlist);
+#else
+ {
+ u64 num_phys_stacked;
+
+ if (ia64_pal_rse_info(&num_phys_stacked, 0) == 0 && num_phys_stacked > 96)
+ ia64_patch_rse((u64) __start___rse_patchlist, (u64) __end___rse_patchlist);
+ }
+#endif
+
#ifdef CONFIG_SMP
cpu_physical_id(0) = hard_smp_processor_id();
#endif
diff --git a/arch/ia64/kernel/vmlinux.lds.S b/arch/ia64/kernel/vmlinux.lds.S
index 80622ac..5929ab1 100644
--- a/arch/ia64/kernel/vmlinux.lds.S
+++ b/arch/ia64/kernel/vmlinux.lds.S
@@ -156,6 +156,13 @@
__end___vtop_patchlist = .;
}
+ .data.patch.rse : AT(ADDR(.data.patch.rse) - LOAD_OFFSET)
+ {
+ __start___rse_patchlist = .;
+ *(.data.patch.rse)
+ __end___rse_patchlist = .;
+ }
+
.data.patch.mckinley_e9 : AT(ADDR(.data.patch.mckinley_e9) - LOAD_OFFSET)
{
__start___mckinley_e9_bundles = .;
diff --git a/arch/ia64/kvm/Makefile b/arch/ia64/kvm/Makefile
index 52353397..112791d 100644
--- a/arch/ia64/kvm/Makefile
+++ b/arch/ia64/kvm/Makefile
@@ -7,7 +7,6 @@
always := $(offsets-file)
targets := $(offsets-file)
targets += arch/ia64/kvm/asm-offsets.s
-clean-files := $(addprefix $(objtree)/,$(targets) $(obj)/memcpy.S $(obj)/memset.S)
# Default sed regexp - multiline due to syntax constraints
define sed-y
@@ -54,5 +53,5 @@
kvm-intel-objs = vmm.o vmm_ivt.o trampoline.o vcpu.o optvfault.o mmio.o \
vtlb.o process.o
#Add link memcpy and memset to avoid possible structure assignment error
-kvm-intel-objs += ../lib/memset.o ../lib/memcpy.o
+kvm-intel-objs += memcpy.o memset.o
obj-$(CONFIG_KVM_INTEL) += kvm-intel.o
diff --git a/arch/ia64/kvm/memcpy.S b/arch/ia64/kvm/memcpy.S
new file mode 100644
index 0000000..c04cdbe
--- /dev/null
+++ b/arch/ia64/kvm/memcpy.S
@@ -0,0 +1 @@
+#include "../lib/memcpy.S"
diff --git a/arch/ia64/kvm/memset.S b/arch/ia64/kvm/memset.S
new file mode 100644
index 0000000..83c3066
--- /dev/null
+++ b/arch/ia64/kvm/memset.S
@@ -0,0 +1 @@
+#include "../lib/memset.S"
diff --git a/arch/ia64/kvm/mmio.c b/arch/ia64/kvm/mmio.c
index 351bf70..7f1a858 100644
--- a/arch/ia64/kvm/mmio.c
+++ b/arch/ia64/kvm/mmio.c
@@ -159,7 +159,8 @@
if (p->u.ioreq.state == STATE_IORESP_READY) {
if (dir == IOREQ_READ)
- *dest = p->u.ioreq.data;
+ /* it's necessary to ensure zero extending */
+ *dest = p->u.ioreq.data & (~0UL >> (64-(s*8)));
} else
panic_vm(vcpu);
out:
diff --git a/arch/ia64/mm/init.c b/arch/ia64/mm/init.c
index fc6c663..200100e 100644
--- a/arch/ia64/mm/init.c
+++ b/arch/ia64/mm/init.c
@@ -719,3 +719,28 @@
EXPORT_SYMBOL_GPL(remove_memory);
#endif /* CONFIG_MEMORY_HOTREMOVE */
#endif
+
+/*
+ * Even when CONFIG_IA32_SUPPORT is not enabled it is
+ * useful to have the Linux/x86 domain registered to
+ * avoid an attempted module load when emulators call
+ * personality(PER_LINUX32). This saves several milliseconds
+ * on each such call.
+ */
+static struct exec_domain ia32_exec_domain;
+
+static int __init
+per_linux32_init(void)
+{
+ ia32_exec_domain.name = "Linux/x86";
+ ia32_exec_domain.handler = NULL;
+ ia32_exec_domain.pers_low = PER_LINUX32;
+ ia32_exec_domain.pers_high = PER_LINUX32;
+ ia32_exec_domain.signal_map = default_exec_domain.signal_map;
+ ia32_exec_domain.signal_invmap = default_exec_domain.signal_invmap;
+ register_exec_domain(&ia32_exec_domain);
+
+ return 0;
+}
+
+__initcall(per_linux32_init);
diff --git a/arch/ia64/uv/Makefile b/arch/ia64/uv/Makefile
new file mode 100644
index 0000000..aa9f919
--- /dev/null
+++ b/arch/ia64/uv/Makefile
@@ -0,0 +1,12 @@
+# arch/ia64/uv/Makefile
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License. See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 2008 Silicon Graphics, Inc. All Rights Reserved.
+#
+# Makefile for the sn uv subplatform
+#
+
+obj-y += kernel/
diff --git a/arch/ia64/uv/kernel/Makefile b/arch/ia64/uv/kernel/Makefile
new file mode 100644
index 0000000..8d92b46
--- /dev/null
+++ b/arch/ia64/uv/kernel/Makefile
@@ -0,0 +1,13 @@
+# arch/ia64/uv/kernel/Makefile
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License. See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 2008 Silicon Graphics, Inc. All Rights Reserved.
+#
+
+EXTRA_CFLAGS += -Iarch/ia64/sn/include
+
+obj-y += setup.o
+obj-$(CONFIG_IA64_GENERIC) += machvec.o
diff --git a/arch/ia64/uv/kernel/machvec.c b/arch/ia64/uv/kernel/machvec.c
new file mode 100644
index 0000000..50737a9
--- /dev/null
+++ b/arch/ia64/uv/kernel/machvec.c
@@ -0,0 +1,11 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (c) 2008 Silicon Graphics, Inc. All Rights Reserved.
+ */
+
+#define MACHVEC_PLATFORM_NAME uv
+#define MACHVEC_PLATFORM_HEADER <asm/machvec_uv.h>
+#include <asm/machvec_init.h>
diff --git a/arch/ia64/uv/kernel/setup.c b/arch/ia64/uv/kernel/setup.c
new file mode 100644
index 0000000..9aa7432
--- /dev/null
+++ b/arch/ia64/uv/kernel/setup.c
@@ -0,0 +1,98 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * SGI UV Core Functions
+ *
+ * Copyright (C) 2008 Silicon Graphics, Inc. All rights reserved.
+ */
+
+#include <linux/module.h>
+#include <linux/percpu.h>
+#include <asm/sn/simulator.h>
+#include <asm/uv/uv_mmrs.h>
+#include <asm/uv/uv_hub.h>
+
+DEFINE_PER_CPU(struct uv_hub_info_s, __uv_hub_info);
+EXPORT_PER_CPU_SYMBOL_GPL(__uv_hub_info);
+
+
+struct redir_addr {
+ unsigned long redirect;
+ unsigned long alias;
+};
+
+#define DEST_SHIFT UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR_DEST_BASE_SHFT
+
+static __initdata struct redir_addr redir_addrs[] = {
+ {UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR, UVH_SI_ALIAS0_OVERLAY_CONFIG},
+ {UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR, UVH_SI_ALIAS1_OVERLAY_CONFIG},
+ {UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR, UVH_SI_ALIAS2_OVERLAY_CONFIG},
+};
+
+static __init void get_lowmem_redirect(unsigned long *base, unsigned long *size)
+{
+ union uvh_si_alias0_overlay_config_u alias;
+ union uvh_rh_gam_alias210_redirect_config_2_mmr_u redirect;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(redir_addrs); i++) {
+ alias.v = uv_read_local_mmr(redir_addrs[i].alias);
+ if (alias.s.base == 0) {
+ *size = (1UL << alias.s.m_alias);
+ redirect.v = uv_read_local_mmr(redir_addrs[i].redirect);
+ *base = (unsigned long)redirect.s.dest_base << DEST_SHIFT;
+ return;
+ }
+ }
+ BUG();
+}
+
+void __init uv_setup(char **cmdline_p)
+{
+ union uvh_si_addr_map_config_u m_n_config;
+ union uvh_node_id_u node_id;
+ unsigned long gnode_upper;
+ int nid, cpu, m_val, n_val;
+ unsigned long mmr_base, lowmem_redir_base, lowmem_redir_size;
+
+ if (IS_MEDUSA()) {
+ lowmem_redir_base = 0;
+ lowmem_redir_size = 0;
+ node_id.v = 0;
+ m_n_config.s.m_skt = 37;
+ m_n_config.s.n_skt = 0;
+ mmr_base = 0;
+ } else {
+ get_lowmem_redirect(&lowmem_redir_base, &lowmem_redir_size);
+ node_id.v = uv_read_local_mmr(UVH_NODE_ID);
+ m_n_config.v = uv_read_local_mmr(UVH_SI_ADDR_MAP_CONFIG);
+ mmr_base =
+ uv_read_local_mmr(UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR) &
+ ~UV_MMR_ENABLE;
+ }
+
+ m_val = m_n_config.s.m_skt;
+ n_val = m_n_config.s.n_skt;
+ printk(KERN_DEBUG "UV: global MMR base 0x%lx\n", mmr_base);
+
+ gnode_upper = (((unsigned long)node_id.s.node_id) &
+ ~((1 << n_val) - 1)) << m_val;
+
+ for_each_present_cpu(cpu) {
+ nid = cpu_to_node(cpu);
+ uv_cpu_hub_info(cpu)->lowmem_remap_base = lowmem_redir_base;
+ uv_cpu_hub_info(cpu)->lowmem_remap_top =
+ lowmem_redir_base + lowmem_redir_size;
+ uv_cpu_hub_info(cpu)->m_val = m_val;
+ uv_cpu_hub_info(cpu)->n_val = m_val;
+ uv_cpu_hub_info(cpu)->pnode_mask = (1 << n_val) -1;
+ uv_cpu_hub_info(cpu)->gpa_mask = (1 << (m_val + n_val)) - 1;
+ uv_cpu_hub_info(cpu)->gnode_upper = gnode_upper;
+ uv_cpu_hub_info(cpu)->global_mmr_base = mmr_base;
+ uv_cpu_hub_info(cpu)->coherency_domain_number = 0;/* ZZZ */
+ printk(KERN_DEBUG "UV cpu %d, nid %d\n", cpu, nid);
+ }
+}
+
diff --git a/arch/m32r/kernel/init_task.c b/arch/m32r/kernel/init_task.c
index 9e508fd..0d658db 100644
--- a/arch/m32r/kernel/init_task.c
+++ b/arch/m32r/kernel/init_task.c
@@ -12,7 +12,6 @@
#include <asm/pgtable.h>
static struct fs_struct init_fs = INIT_FS;
-static struct files_struct init_files = INIT_FILES;
static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
struct mm_struct init_mm = INIT_MM(init_mm);
diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig
index 65db226..55ea52f 100644
--- a/arch/m68k/Kconfig
+++ b/arch/m68k/Kconfig
@@ -44,7 +44,7 @@
config ARCH_MAY_HAVE_PC_FDC
bool
- depends on Q40 || (BROKEN && SUN3X)
+ depends on BROKEN && (Q40 || SUN3X)
default y
config NO_IOPORT
@@ -539,13 +539,6 @@
To compile this driver as a module, choose M here.
-config WHIPPET_SERIAL
- tristate "Hisoft Whippet PCMCIA serial support"
- depends on AMIGA_PCMCIA
- help
- HiSoft has a web page at <http://www.hisoft.co.uk/>, but there
- is no listing for the Whippet in their Amiga section.
-
config MULTIFACE_III_TTY
tristate "Multiface Card III serial support"
depends on AMIGA
diff --git a/arch/m68k/configs/amiga_defconfig b/arch/m68k/configs/amiga_defconfig
index e419583..8e2a0f5 100644
--- a/arch/m68k/configs/amiga_defconfig
+++ b/arch/m68k/configs/amiga_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc8
-# Wed Apr 2 20:46:06 2008
+# Linux kernel version: 2.6.26-rc4
+# Wed May 28 22:47:35 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
@@ -52,13 +52,14 @@
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
@@ -76,12 +77,14 @@
# CONFIG_HAVE_OPROFILE is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
@@ -141,6 +144,7 @@
CONFIG_NEED_MULTIPLE_NODES=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
@@ -222,8 +226,10 @@
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
@@ -239,6 +245,7 @@
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
# CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CT_PROTO_DCCP is not set
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
@@ -317,6 +324,8 @@
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
@@ -410,8 +419,6 @@
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -477,27 +484,12 @@
#
# IDE chipset support/bugfixes
#
-# CONFIG_IDE_GENERIC is not set
# CONFIG_BLK_DEV_PLATFORM is not set
CONFIG_BLK_DEV_GAYLE=y
CONFIG_BLK_DEV_IDEDOUBLER=y
CONFIG_BLK_DEV_BUDDHA=y
-
-#
-# Other IDE chipsets support
-#
-
-#
-# Note: most of these also require special kernel boot parameters
-#
-# CONFIG_BLK_DEV_4DRIVES is not set
-# CONFIG_BLK_DEV_ALI14XX is not set
-# CONFIG_BLK_DEV_DTC2278 is not set
-# CONFIG_BLK_DEV_HT6560B is not set
-# CONFIG_BLK_DEV_QD65XX is not set
-# CONFIG_BLK_DEV_UMC8672 is not set
# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDE_ARCH_OBSOLETE_INIT is not set
+# CONFIG_BLK_DEV_HD_ONLY is not set
# CONFIG_BLK_DEV_HD is not set
#
@@ -626,6 +618,7 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
@@ -707,6 +700,7 @@
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDJOY is not set
+# CONFIG_JOYSTICK_ZHENHUA is not set
# CONFIG_JOYSTICK_DB9 is not set
# CONFIG_JOYSTICK_GAMECON is not set
# CONFIG_JOYSTICK_TURBOGRAFX is not set
@@ -731,6 +725,7 @@
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
CONFIG_A2232=m
@@ -757,12 +752,7 @@
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
@@ -779,12 +769,22 @@
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
@@ -802,8 +802,8 @@
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
@@ -859,19 +859,15 @@
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_AUXDISPLAY is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
# Character devices
#
CONFIG_AMIGA_BUILTIN_SERIAL=y
-# CONFIG_WHIPPET_SERIAL is not set
CONFIG_MULTIFACE_III_TTY=m
# CONFIG_SERIAL_CONSOLE is not set
@@ -894,16 +890,15 @@
# CONFIG_JFS_SECURITY is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
-CONFIG_FS_POSIX_ACL=y
+# CONFIG_FS_POSIX_ACL is not set
CONFIG_XFS_FS=m
# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
-CONFIG_GFS2_FS=m
-CONFIG_GFS2_FS_LOCKING_NOLOCK=m
-CONFIG_GFS2_FS_LOCKING_DLM=m
+# CONFIG_XFS_DEBUG is not set
CONFIG_OCFS2_FS=m
+CONFIG_OCFS2_FS_O2CB=m
+CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
@@ -975,12 +970,10 @@
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
@@ -1054,6 +1047,7 @@
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -1073,53 +1067,82 @@
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_SEQIV=m
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_SEQIV=m
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+
+#
+# Hash modes
+#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_XTS=m
-CONFIG_CRYPTO_CTR=m
-CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_CCM=m
-CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_LZO=m
# CONFIG_CRYPTO_HW is not set
@@ -1127,9 +1150,11 @@
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
diff --git a/arch/m68k/configs/apollo_defconfig b/arch/m68k/configs/apollo_defconfig
index e61196c..e2d511e 100644
--- a/arch/m68k/configs/apollo_defconfig
+++ b/arch/m68k/configs/apollo_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc8
-# Wed Apr 2 20:46:07 2008
+# Linux kernel version: 2.6.26-rc4
+# Wed May 28 22:47:35 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
@@ -52,13 +52,14 @@
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
@@ -76,12 +77,14 @@
# CONFIG_HAVE_OPROFILE is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
@@ -141,6 +144,7 @@
CONFIG_NEED_MULTIPLE_NODES=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
@@ -220,8 +224,10 @@
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
@@ -237,6 +243,7 @@
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
# CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CT_PROTO_DCCP is not set
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
@@ -315,6 +322,8 @@
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
@@ -408,8 +417,6 @@
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -539,6 +546,7 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
@@ -622,6 +630,7 @@
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -643,12 +652,7 @@
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
@@ -665,12 +669,22 @@
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
@@ -688,8 +702,8 @@
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
@@ -737,11 +751,8 @@
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -769,16 +780,15 @@
# CONFIG_JFS_SECURITY is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
-CONFIG_FS_POSIX_ACL=y
+# CONFIG_FS_POSIX_ACL is not set
CONFIG_XFS_FS=m
# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
-CONFIG_GFS2_FS=m
-CONFIG_GFS2_FS_LOCKING_NOLOCK=m
-CONFIG_GFS2_FS_LOCKING_DLM=m
+# CONFIG_XFS_DEBUG is not set
CONFIG_OCFS2_FS=m
+CONFIG_OCFS2_FS_O2CB=m
+CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
@@ -850,12 +860,10 @@
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
@@ -929,6 +937,7 @@
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -948,53 +957,82 @@
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_SEQIV=m
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_SEQIV=m
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+
+#
+# Hash modes
+#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_XTS=m
-CONFIG_CRYPTO_CTR=m
-CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_CCM=m
-CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_LZO=m
# CONFIG_CRYPTO_HW is not set
@@ -1002,9 +1040,11 @@
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
diff --git a/arch/m68k/configs/atari_defconfig b/arch/m68k/configs/atari_defconfig
index ba7f971..6e20d65 100644
--- a/arch/m68k/configs/atari_defconfig
+++ b/arch/m68k/configs/atari_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc8
-# Wed Apr 2 20:46:09 2008
+# Linux kernel version: 2.6.26-rc4
+# Wed May 28 22:47:35 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
@@ -52,13 +52,14 @@
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
@@ -76,12 +77,14 @@
# CONFIG_HAVE_OPROFILE is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
@@ -141,6 +144,7 @@
CONFIG_NEED_MULTIPLE_NODES=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
@@ -218,8 +222,10 @@
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
@@ -235,6 +241,7 @@
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
# CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CT_PROTO_DCCP is not set
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
@@ -313,6 +320,8 @@
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
@@ -406,8 +415,6 @@
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -469,11 +476,10 @@
#
# IDE chipset support/bugfixes
#
-# CONFIG_IDE_GENERIC is not set
# CONFIG_BLK_DEV_PLATFORM is not set
CONFIG_BLK_DEV_FALCON_IDE=y
# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDE_ARCH_OBSOLETE_INIT is not set
+# CONFIG_BLK_DEV_HD_ONLY is not set
# CONFIG_BLK_DEV_HD is not set
#
@@ -572,6 +578,7 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
@@ -662,6 +669,7 @@
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -687,12 +695,7 @@
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
@@ -709,12 +712,22 @@
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
@@ -732,8 +745,8 @@
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
@@ -784,12 +797,9 @@
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_AUXDISPLAY is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -821,16 +831,15 @@
# CONFIG_JFS_SECURITY is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
-CONFIG_FS_POSIX_ACL=y
+# CONFIG_FS_POSIX_ACL is not set
CONFIG_XFS_FS=m
# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
-CONFIG_GFS2_FS=m
-CONFIG_GFS2_FS_LOCKING_NOLOCK=m
-CONFIG_GFS2_FS_LOCKING_DLM=m
+# CONFIG_XFS_DEBUG is not set
CONFIG_OCFS2_FS=m
+CONFIG_OCFS2_FS_O2CB=m
+CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
@@ -902,12 +911,10 @@
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
@@ -980,6 +987,7 @@
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -999,53 +1007,82 @@
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_SEQIV=m
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_SEQIV=m
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+
+#
+# Hash modes
+#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_XTS=m
-CONFIG_CRYPTO_CTR=m
-CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_CCM=m
-CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_LZO=m
# CONFIG_CRYPTO_HW is not set
@@ -1053,9 +1090,11 @@
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=y
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
diff --git a/arch/m68k/configs/bvme6000_defconfig b/arch/m68k/configs/bvme6000_defconfig
index ed98eff..a0a9b30 100644
--- a/arch/m68k/configs/bvme6000_defconfig
+++ b/arch/m68k/configs/bvme6000_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc8
-# Wed Apr 2 20:46:10 2008
+# Linux kernel version: 2.6.26-rc4
+# Wed May 28 22:47:35 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
@@ -52,13 +52,14 @@
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
@@ -76,12 +77,14 @@
# CONFIG_HAVE_OPROFILE is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
@@ -144,6 +147,7 @@
CONFIG_NEED_MULTIPLE_NODES=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
@@ -222,8 +226,10 @@
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
@@ -239,6 +245,7 @@
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
# CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CT_PROTO_DCCP is not set
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
@@ -317,6 +324,8 @@
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
@@ -410,8 +419,6 @@
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -543,6 +550,7 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
@@ -626,6 +634,7 @@
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -647,12 +656,7 @@
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
@@ -669,12 +673,22 @@
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
@@ -707,11 +721,8 @@
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -739,16 +750,15 @@
# CONFIG_JFS_SECURITY is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
-CONFIG_FS_POSIX_ACL=y
+# CONFIG_FS_POSIX_ACL is not set
CONFIG_XFS_FS=m
# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
-CONFIG_GFS2_FS=m
-CONFIG_GFS2_FS_LOCKING_NOLOCK=m
-CONFIG_GFS2_FS_LOCKING_DLM=m
+# CONFIG_XFS_DEBUG is not set
CONFIG_OCFS2_FS=m
+CONFIG_OCFS2_FS_O2CB=m
+CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
@@ -820,12 +830,10 @@
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
@@ -900,6 +908,7 @@
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -919,53 +928,82 @@
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_SEQIV=m
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_SEQIV=m
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+
+#
+# Hash modes
+#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_XTS=m
-CONFIG_CRYPTO_CTR=m
-CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_CCM=m
-CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_LZO=m
# CONFIG_CRYPTO_HW is not set
@@ -973,9 +1011,11 @@
# Library routines
#
CONFIG_BITREVERSE=m
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=m
CONFIG_CRC32=m
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
diff --git a/arch/m68k/configs/hp300_defconfig b/arch/m68k/configs/hp300_defconfig
index 38b68c7..6778041 100644
--- a/arch/m68k/configs/hp300_defconfig
+++ b/arch/m68k/configs/hp300_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc8
-# Wed Apr 2 20:46:12 2008
+# Linux kernel version: 2.6.26-rc4
+# Wed May 28 22:47:35 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
@@ -52,13 +52,14 @@
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
@@ -76,12 +77,14 @@
# CONFIG_HAVE_OPROFILE is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
@@ -142,6 +145,7 @@
CONFIG_NEED_MULTIPLE_NODES=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
@@ -221,8 +225,10 @@
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
@@ -238,6 +244,7 @@
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
# CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CT_PROTO_DCCP is not set
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
@@ -316,6 +323,8 @@
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
@@ -409,8 +418,6 @@
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -540,6 +547,7 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
@@ -631,6 +639,7 @@
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -652,12 +661,7 @@
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
@@ -674,12 +678,22 @@
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
@@ -690,15 +704,15 @@
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
-CONFIG_FB_CFB_FILLRECT=y
+# CONFIG_FB_CFB_FILLRECT is not set
# CONFIG_FB_CFB_COPYAREA is not set
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
@@ -746,11 +760,8 @@
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -776,16 +787,15 @@
# CONFIG_JFS_SECURITY is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
-CONFIG_FS_POSIX_ACL=y
+# CONFIG_FS_POSIX_ACL is not set
CONFIG_XFS_FS=m
# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
-CONFIG_GFS2_FS=m
-CONFIG_GFS2_FS_LOCKING_NOLOCK=m
-CONFIG_GFS2_FS_LOCKING_DLM=m
+# CONFIG_XFS_DEBUG is not set
CONFIG_OCFS2_FS=m
+CONFIG_OCFS2_FS_O2CB=m
+CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
@@ -857,12 +867,10 @@
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
@@ -936,6 +944,7 @@
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -955,53 +964,82 @@
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_SEQIV=m
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_SEQIV=m
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+
+#
+# Hash modes
+#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_XTS=m
-CONFIG_CRYPTO_CTR=m
-CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_CCM=m
-CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_LZO=m
# CONFIG_CRYPTO_HW is not set
@@ -1009,9 +1047,11 @@
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
diff --git a/arch/m68k/configs/mac_defconfig b/arch/m68k/configs/mac_defconfig
index 738bca6..7cd3757 100644
--- a/arch/m68k/configs/mac_defconfig
+++ b/arch/m68k/configs/mac_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc8
-# Wed Apr 2 20:46:14 2008
+# Linux kernel version: 2.6.26-rc4
+# Wed May 28 22:47:35 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
@@ -52,13 +52,14 @@
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
@@ -76,12 +77,14 @@
# CONFIG_HAVE_OPROFILE is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
@@ -143,6 +146,7 @@
CONFIG_NEED_MULTIPLE_NODES=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
@@ -219,8 +223,10 @@
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
@@ -236,6 +242,7 @@
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
# CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CT_PROTO_DCCP is not set
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
@@ -314,6 +321,8 @@
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
@@ -410,8 +419,6 @@
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -467,11 +474,10 @@
#
# IDE chipset support/bugfixes
#
-# CONFIG_IDE_GENERIC is not set
# CONFIG_BLK_DEV_PLATFORM is not set
CONFIG_BLK_DEV_MAC_IDE=y
# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDE_ARCH_OBSOLETE_INIT is not set
+# CONFIG_BLK_DEV_HD_ONLY is not set
# CONFIG_BLK_DEV_HD is not set
#
@@ -520,6 +526,7 @@
CONFIG_ISCSI_TCP=m
# CONFIG_SCSI_DEBUG is not set
CONFIG_MAC_SCSI=y
+CONFIG_SCSI_MAC_ESP=y
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
@@ -580,6 +587,7 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
@@ -665,6 +673,7 @@
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -686,12 +695,7 @@
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
@@ -708,12 +712,22 @@
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
@@ -731,8 +745,8 @@
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
CONFIG_FB_MACMODES=y
# CONFIG_FB_BACKLIGHT is not set
@@ -783,11 +797,8 @@
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -816,16 +827,15 @@
# CONFIG_JFS_SECURITY is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
-CONFIG_FS_POSIX_ACL=y
+# CONFIG_FS_POSIX_ACL is not set
CONFIG_XFS_FS=m
# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
-CONFIG_GFS2_FS=m
-CONFIG_GFS2_FS_LOCKING_NOLOCK=m
-CONFIG_GFS2_FS_LOCKING_DLM=m
+# CONFIG_XFS_DEBUG is not set
CONFIG_OCFS2_FS=m
+CONFIG_OCFS2_FS_O2CB=m
+CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
@@ -897,12 +907,10 @@
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
@@ -976,6 +984,7 @@
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -995,53 +1004,82 @@
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_SEQIV=m
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_SEQIV=m
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+
+#
+# Hash modes
+#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_XTS=m
-CONFIG_CRYPTO_CTR=m
-CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_CCM=m
-CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_DES=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_LZO=m
# CONFIG_CRYPTO_HW is not set
@@ -1049,9 +1087,11 @@
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
diff --git a/arch/m68k/configs/multi_defconfig b/arch/m68k/configs/multi_defconfig
new file mode 100644
index 0000000..0747fa3
--- /dev/null
+++ b/arch/m68k/configs/multi_defconfig
@@ -0,0 +1,1269 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc4
+# Wed May 28 22:47:35 2008
+#
+CONFIG_M68K=y
+CONFIG_MMU=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_TIME_LOW_RES=y
+CONFIG_GENERIC_IOMAP=y
+CONFIG_NO_IOPORT=y
+# CONFIG_NO_DMA is not set
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_HZ=100
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION="-multi"
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SYSCTL=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_HAVE_OPROFILE is not set
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+CONFIG_BLK_DEV_BSG=y
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_CLASSIC_RCU=y
+
+#
+# Platform dependent setup
+#
+# CONFIG_SUN3 is not set
+CONFIG_AMIGA=y
+CONFIG_ATARI=y
+CONFIG_MAC=y
+CONFIG_NUBUS=y
+CONFIG_M68K_L2_CACHE=y
+CONFIG_APOLLO=y
+CONFIG_VME=y
+CONFIG_MVME147=y
+CONFIG_MVME16x=y
+CONFIG_BVME6000=y
+CONFIG_HP300=y
+CONFIG_DIO=y
+CONFIG_SUN3X=y
+CONFIG_Q40=y
+
+#
+# Processor type
+#
+CONFIG_M68020=y
+CONFIG_M68030=y
+CONFIG_M68040=y
+CONFIG_M68060=y
+CONFIG_MMU_MOTOROLA=y
+# CONFIG_M68KFPU_EMU is not set
+# CONFIG_ADVANCED is not set
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+CONFIG_NODES_SHIFT=3
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+# CONFIG_SPARSEMEM_STATIC is not set
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+
+#
+# General setup
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=m
+CONFIG_ZORRO=y
+CONFIG_AMIGA_PCMCIA=y
+CONFIG_STRAM_PROC=y
+CONFIG_HEARTBEAT=y
+CONFIG_PROC_HARDWARE=y
+CONFIG_ISA=y
+CONFIG_GENERIC_ISA_DMA=y
+CONFIG_ZONE_DMA=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_ZORRO_NAMES=y
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=m
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+# CONFIG_IPV6_MIP6 is not set
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+# CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CT_PROTO_DCCP is not set
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+# CONFIG_NF_CT_NETLINK is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_RAW=m
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+CONFIG_IP_DCCP_ACKVEC=y
+
+#
+# DCCP CCIDs Configuration (EXPERIMENTAL)
+#
+CONFIG_IP_DCCP_CCID2=m
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+CONFIG_IP_DCCP_CCID3=m
+# CONFIG_IP_DCCP_CCID3_DEBUG is not set
+CONFIG_IP_DCCP_CCID3_RTO=100
+CONFIG_IP_DCCP_TFRC_LIB=m
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+CONFIG_ATALK=m
+CONFIG_DEV_APPLETALK=m
+# CONFIG_COPS is not set
+CONFIG_IPDDP=m
+CONFIG_IPDDP_ENCAP=y
+CONFIG_IPDDP_DECAP=y
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+CONFIG_NET_CLS_ROUTE=y
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+CONFIG_WIRELESS_EXT=y
+# CONFIG_MAC80211 is not set
+CONFIG_IEEE80211=m
+# CONFIG_IEEE80211_DEBUG is not set
+CONFIG_IEEE80211_CRYPT_WEP=m
+CONFIG_IEEE80211_CRYPT_CCMP=m
+CONFIG_IEEE80211_CRYPT_TKIP=m
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=m
+# CONFIG_MTD is not set
+CONFIG_PARPORT=m
+# CONFIG_PARPORT_PC is not set
+CONFIG_PARPORT_AMIGA=m
+CONFIG_PARPORT_MFC3=m
+CONFIG_PARPORT_ATARI=m
+# CONFIG_PARPORT_GSC is not set
+# CONFIG_PARPORT_AX88796 is not set
+CONFIG_PARPORT_1284=y
+CONFIG_PARPORT_NOT_PC=y
+# CONFIG_PNP is not set
+CONFIG_BLK_DEV=y
+CONFIG_AMIGA_FLOPPY=y
+CONFIG_ATARI_FLOPPY=y
+CONFIG_AMIGA_Z2RAM=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+CONFIG_ATA_OVER_ETH=m
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
+# CONFIG_BLK_DEV_IDETAPE is not set
+CONFIG_BLK_DEV_IDEFLOPPY=m
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
+
+#
+# IDE chipset support/bugfixes
+#
+# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_GAYLE=y
+CONFIG_BLK_DEV_IDEDOUBLER=y
+CONFIG_BLK_DEV_BUDDHA=y
+CONFIG_BLK_DEV_FALCON_IDE=y
+CONFIG_BLK_DEV_MAC_IDE=y
+CONFIG_BLK_DEV_Q40IDE=y
+# CONFIG_BLK_DEV_IDEDMA is not set
+# CONFIG_BLK_DEV_HD_ONLY is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+CONFIG_SCSI_TGT=m
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=m
+CONFIG_CHR_DEV_OSST=m
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+CONFIG_SCSI_CONSTANTS=y
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+CONFIG_SCSI_SPI_ATTRS=y
+# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
+CONFIG_SCSI_SAS_LIBSAS=m
+CONFIG_SCSI_SAS_HOST_SMP=y
+# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
+CONFIG_SCSI_SRP_ATTRS=m
+CONFIG_SCSI_SRP_TGT_ATTRS=y
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
+# CONFIG_SCSI_AHA152X is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_IN2000 is not set
+# CONFIG_SCSI_DTC3280 is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GENERIC_NCR5380 is not set
+# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
+# CONFIG_SCSI_NCR53C406A is not set
+CONFIG_53C700_BE_BUS=y
+# CONFIG_SCSI_PAS16 is not set
+# CONFIG_SCSI_QLOGIC_FAS is not set
+# CONFIG_SCSI_SYM53C416 is not set
+# CONFIG_SCSI_T128 is not set
+# CONFIG_SCSI_DEBUG is not set
+CONFIG_A3000_SCSI=y
+CONFIG_A2091_SCSI=y
+CONFIG_GVP11_SCSI=y
+CONFIG_SCSI_A4000T=y
+CONFIG_SCSI_ZORRO7XX=y
+CONFIG_ATARI_SCSI=y
+# CONFIG_ATARI_SCSI_TOSHIBA_DELAY is not set
+# CONFIG_ATARI_SCSI_RESET_BOOT is not set
+CONFIG_MAC_SCSI=y
+CONFIG_SCSI_MAC_ESP=y
+CONFIG_MVME147_SCSI=y
+CONFIG_MVME16x_SCSI=y
+CONFIG_BVME6000_SCSI=y
+CONFIG_SUN3X_ESP=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+# CONFIG_MD_RAID10 is not set
+CONFIG_MD_RAID456=m
+CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_MULTIPATH=m
+# CONFIG_MD_FAULTY is not set
+CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_EMC=m
+CONFIG_DM_MULTIPATH_RDAC=m
+CONFIG_DM_MULTIPATH_HP=m
+# CONFIG_DM_DELAY is not set
+CONFIG_DM_UEVENT=y
+CONFIG_MACINTOSH_DRIVERS=y
+CONFIG_ADB=y
+CONFIG_ADB_MACII=y
+CONFIG_ADB_MACIISI=y
+CONFIG_ADB_IOP=y
+CONFIG_ADB_PMU68K=y
+CONFIG_ADB_CUDA=y
+CONFIG_INPUT_ADBHID=y
+CONFIG_MAC_EMUMOUSEBTN=y
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_DUMMY=m
+# CONFIG_BONDING is not set
+CONFIG_MACVLAN=m
+CONFIG_EQUALIZER=m
+# CONFIG_TUN is not set
+CONFIG_VETH=m
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=m
+CONFIG_ARIADNE=m
+CONFIG_A2065=m
+CONFIG_HYDRA=m
+CONFIG_ZORRO8390=m
+CONFIG_APNE=m
+CONFIG_APOLLO_ELPLUS=y
+CONFIG_MAC8390=y
+CONFIG_MAC89x0=m
+CONFIG_MACSONIC=m
+CONFIG_MACMACE=y
+CONFIG_MVME147_NET=y
+CONFIG_MVME16x_NET=y
+CONFIG_BVME6000_NET=y
+CONFIG_ATARILANCE=m
+CONFIG_SUN3LANCE=y
+CONFIG_HPLANCE=y
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_NET_VENDOR_RACAL is not set
+# CONFIG_AT1700 is not set
+# CONFIG_DEPCA is not set
+# CONFIG_HP100 is not set
+# CONFIG_NET_ISA is not set
+CONFIG_NE2000=m
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+# CONFIG_NET_POCKET is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+# CONFIG_PLIP is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+CONFIG_PPPOL2TP=m
+CONFIG_SLIP=m
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLHC=m
+CONFIG_SLIP_SMART=y
+CONFIG_SLIP_MODE_SLIP6=y
+CONFIG_NETCONSOLE=m
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+# CONFIG_NETPOLL_TRAP is not set
+CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_SUNKBD=y
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_AMIGA=y
+CONFIG_ATARI_KBD_CORE=y
+CONFIG_KEYBOARD_ATARI=y
+CONFIG_KEYBOARD_HIL_OLD=y
+CONFIG_KEYBOARD_HIL=y
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_LIFEBOOK=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+CONFIG_MOUSE_SERIAL=m
+# CONFIG_MOUSE_INPORT is not set
+# CONFIG_MOUSE_LOGIBM is not set
+# CONFIG_MOUSE_PC110PAD is not set
+CONFIG_MOUSE_AMIGA=m
+CONFIG_MOUSE_ATARI=m
+# CONFIG_MOUSE_VSXXXAA is not set
+CONFIG_MOUSE_HIL=m
+CONFIG_INPUT_JOYSTICK=y
+# CONFIG_JOYSTICK_ANALOG is not set
+# CONFIG_JOYSTICK_A3D is not set
+# CONFIG_JOYSTICK_ADI is not set
+# CONFIG_JOYSTICK_COBRA is not set
+# CONFIG_JOYSTICK_GF2K is not set
+# CONFIG_JOYSTICK_GRIP is not set
+# CONFIG_JOYSTICK_GRIP_MP is not set
+# CONFIG_JOYSTICK_GUILLEMOT is not set
+# CONFIG_JOYSTICK_INTERACT is not set
+# CONFIG_JOYSTICK_SIDEWINDER is not set
+# CONFIG_JOYSTICK_TMDC is not set
+# CONFIG_JOYSTICK_IFORCE is not set
+# CONFIG_JOYSTICK_WARRIOR is not set
+# CONFIG_JOYSTICK_MAGELLAN is not set
+# CONFIG_JOYSTICK_SPACEORB is not set
+# CONFIG_JOYSTICK_SPACEBALL is not set
+# CONFIG_JOYSTICK_STINGER is not set
+# CONFIG_JOYSTICK_TWIDJOY is not set
+# CONFIG_JOYSTICK_ZHENHUA is not set
+# CONFIG_JOYSTICK_DB9 is not set
+# CONFIG_JOYSTICK_GAMECON is not set
+# CONFIG_JOYSTICK_TURBOGRAFX is not set
+CONFIG_JOYSTICK_AMIGA=m
+# CONFIG_JOYSTICK_JOYDUMP is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_M68K_BEEP=m
+# CONFIG_INPUT_UINPUT is not set
+CONFIG_HP_SDC_RTC=m
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_SERPORT is not set
+CONFIG_SERIO_Q40KBD=m
+# CONFIG_SERIO_PARKBD is not set
+CONFIG_HP_SDC=y
+CONFIG_HIL_MLC=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+CONFIG_A2232=m
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+CONFIG_PRINTER=m
+# CONFIG_LP_CONSOLE is not set
+# CONFIG_PPDEV is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+CONFIG_NVRAM=y
+CONFIG_GEN_RTC=m
+CONFIG_GEN_RTC_X=y
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+CONFIG_FB_MACMODES=y
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+CONFIG_FB_CIRRUS=y
+CONFIG_FB_APOLLO=y
+CONFIG_FB_Q40=y
+CONFIG_FB_AMIGA=y
+CONFIG_FB_AMIGA_OCS=y
+CONFIG_FB_AMIGA_ECS=y
+CONFIG_FB_AMIGA_AGA=y
+CONFIG_FB_FM2=y
+CONFIG_FB_ATARI=y
+CONFIG_FB_VALKYRIE=y
+CONFIG_FB_MAC=y
+CONFIG_FB_HP300=y
+# CONFIG_FB_UVESA is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_ATY is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_FONT_6x11=y
+CONFIG_FONT_PEARL_8x8=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_LOGO_MAC_CLUT224=y
+
+#
+# Sound
+#
+CONFIG_SOUND=m
+CONFIG_DMASOUND_ATARI=m
+CONFIG_DMASOUND_PAULA=m
+CONFIG_DMASOUND_Q40=m
+CONFIG_DMASOUND=m
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=m
+# CONFIG_HID_DEBUG is not set
+CONFIG_HIDRAW=y
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_RTC_CLASS is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# Character devices
+#
+CONFIG_ATARI_MFPSER=m
+CONFIG_ATARI_SCC=y
+CONFIG_ATARI_SCC_DMA=y
+CONFIG_ATARI_MIDI=m
+CONFIG_ATARI_DSP56K=m
+CONFIG_AMIGA_BUILTIN_SERIAL=y
+CONFIG_MULTIFACE_III_TTY=m
+CONFIG_MAC_SCC=y
+CONFIG_MAC_HID=y
+CONFIG_MVME147_SCC=y
+CONFIG_SERIAL167=y
+CONFIG_MVME162_SCC=y
+CONFIG_BVME6000_SCC=y
+CONFIG_DN_SERIAL=y
+CONFIG_SERIAL_CONSOLE=y
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4DEV_FS is not set
+CONFIG_JBD=y
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+# CONFIG_REISERFS_FS_XATTR is not set
+CONFIG_JFS_FS=m
+# CONFIG_JFS_POSIX_ACL is not set
+# CONFIG_JFS_SECURITY is not set
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_STATISTICS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_XFS_FS=m
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
+CONFIG_OCFS2_FS=m
+CONFIG_OCFS2_FS_O2CB=m
+CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
+# CONFIG_OCFS2_DEBUG_MASKLOG is not set
+# CONFIG_OCFS2_DEBUG_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
+# CONFIG_QFMT_V1 is not set
+# CONFIG_QFMT_V2 is not set
+CONFIG_QUOTACTL=y
+CONFIG_AUTOFS_FS=m
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=m
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+CONFIG_AFFS_FS=m
+CONFIG_HFS_FS=y
+CONFIG_HFSPLUS_FS=y
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_CRAMFS=m
+# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=y
+CONFIG_HPFS_FS=m
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_SYSV_FS=m
+CONFIG_UFS_FS=m
+# CONFIG_UFS_FS_WRITE is not set
+# CONFIG_UFS_DEBUG is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_SUNRPC_BIND34=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+CONFIG_SMB_NLS_DEFAULT=y
+CONFIG_SMB_NLS_REMOTE="cp437"
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+CONFIG_CODA_FS=m
+# CONFIG_CODA_FS_OLD_API is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_AMIGA_PARTITION=y
+CONFIG_ATARI_PARTITION=y
+CONFIG_MAC_PARTITION=y
+CONFIG_MSDOS_PARTITION=y
+CONFIG_SUN_PARTITION=y
+CONFIG_SYSV68_PARTITION=y
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=y
+CONFIG_DLM=m
+# CONFIG_DLM_DEBUG is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_SAMPLES is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_XOR_BLOCKS=m
+CONFIG_ASYNC_CORE=m
+CONFIG_ASYNC_MEMCPY=m
+CONFIG_ASYNC_XOR=m
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_SEQIV=m
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_XCBC=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=m
+CONFIG_CRYPTO_LZO=m
+# CONFIG_CRYPTO_HW is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=y
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=m
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_DMA=y
diff --git a/arch/m68k/configs/mvme147_defconfig b/arch/m68k/configs/mvme147_defconfig
index f40b172..e7a8246 100644
--- a/arch/m68k/configs/mvme147_defconfig
+++ b/arch/m68k/configs/mvme147_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc8
-# Wed Apr 2 20:46:17 2008
+# Linux kernel version: 2.6.26-rc4
+# Wed May 28 22:47:35 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
@@ -52,13 +52,14 @@
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
@@ -76,12 +77,14 @@
# CONFIG_HAVE_OPROFILE is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
@@ -144,6 +147,7 @@
CONFIG_NEED_MULTIPLE_NODES=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
@@ -222,8 +226,10 @@
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
@@ -239,6 +245,7 @@
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
# CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CT_PROTO_DCCP is not set
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
@@ -317,6 +324,8 @@
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
@@ -410,8 +419,6 @@
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -542,6 +549,7 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
@@ -625,6 +633,7 @@
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -646,12 +655,7 @@
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
@@ -668,12 +672,22 @@
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
@@ -706,11 +720,8 @@
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -738,16 +749,15 @@
# CONFIG_JFS_SECURITY is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
-CONFIG_FS_POSIX_ACL=y
+# CONFIG_FS_POSIX_ACL is not set
CONFIG_XFS_FS=m
# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
-CONFIG_GFS2_FS=m
-CONFIG_GFS2_FS_LOCKING_NOLOCK=m
-CONFIG_GFS2_FS_LOCKING_DLM=m
+# CONFIG_XFS_DEBUG is not set
CONFIG_OCFS2_FS=m
+CONFIG_OCFS2_FS_O2CB=m
+CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
@@ -819,12 +829,10 @@
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
@@ -899,6 +907,7 @@
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -918,53 +927,82 @@
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_SEQIV=m
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_SEQIV=m
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+
+#
+# Hash modes
+#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_XTS=m
-CONFIG_CRYPTO_CTR=m
-CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_CCM=m
-CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_LZO=m
# CONFIG_CRYPTO_HW is not set
@@ -972,9 +1010,11 @@
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
diff --git a/arch/m68k/configs/mvme16x_defconfig b/arch/m68k/configs/mvme16x_defconfig
index e9ccc77..ab536eb 100644
--- a/arch/m68k/configs/mvme16x_defconfig
+++ b/arch/m68k/configs/mvme16x_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc8
-# Wed Apr 2 20:46:19 2008
+# Linux kernel version: 2.6.26-rc4
+# Wed May 28 22:47:35 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
@@ -52,13 +52,14 @@
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
@@ -76,12 +77,14 @@
# CONFIG_HAVE_OPROFILE is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
@@ -144,6 +147,7 @@
CONFIG_NEED_MULTIPLE_NODES=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
@@ -222,8 +226,10 @@
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
@@ -239,6 +245,7 @@
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
# CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CT_PROTO_DCCP is not set
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
@@ -317,6 +324,8 @@
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
@@ -410,8 +419,6 @@
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -543,6 +550,7 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
@@ -626,6 +634,7 @@
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -647,12 +656,7 @@
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
@@ -669,12 +673,22 @@
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
@@ -707,11 +721,8 @@
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -740,16 +751,15 @@
# CONFIG_JFS_SECURITY is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
-CONFIG_FS_POSIX_ACL=y
+# CONFIG_FS_POSIX_ACL is not set
CONFIG_XFS_FS=m
# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
-CONFIG_GFS2_FS=m
-CONFIG_GFS2_FS_LOCKING_NOLOCK=m
-CONFIG_GFS2_FS_LOCKING_DLM=m
+# CONFIG_XFS_DEBUG is not set
CONFIG_OCFS2_FS=m
+CONFIG_OCFS2_FS_O2CB=m
+CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
@@ -821,12 +831,10 @@
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
@@ -901,6 +909,7 @@
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -920,53 +929,82 @@
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_SEQIV=m
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_SEQIV=m
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+
+#
+# Hash modes
+#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_XTS=m
-CONFIG_CRYPTO_CTR=m
-CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_CCM=m
-CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_LZO=m
# CONFIG_CRYPTO_HW is not set
@@ -974,9 +1012,11 @@
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
diff --git a/arch/m68k/configs/q40_defconfig b/arch/m68k/configs/q40_defconfig
index 165658f..e05be68 100644
--- a/arch/m68k/configs/q40_defconfig
+++ b/arch/m68k/configs/q40_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc8
-# Wed Apr 2 20:46:20 2008
+# Linux kernel version: 2.6.26-rc4
+# Wed May 28 22:47:35 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
@@ -12,7 +12,6 @@
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_TIME_LOW_RES=y
CONFIG_GENERIC_IOMAP=y
-CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_NO_IOPORT=y
# CONFIG_NO_DMA is not set
CONFIG_ARCH_SUPPORTS_AOUT=y
@@ -53,13 +52,14 @@
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
@@ -77,12 +77,14 @@
# CONFIG_HAVE_OPROFILE is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
@@ -142,6 +144,7 @@
CONFIG_NEED_MULTIPLE_NODES=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
@@ -220,8 +223,10 @@
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
@@ -237,6 +242,7 @@
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
# CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CT_PROTO_DCCP is not set
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
@@ -315,6 +321,8 @@
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
@@ -408,8 +416,6 @@
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -430,7 +436,6 @@
# CONFIG_PARPORT is not set
# CONFIG_PNP is not set
CONFIG_BLK_DEV=y
-# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=m
@@ -467,25 +472,10 @@
#
# IDE chipset support/bugfixes
#
-# CONFIG_IDE_GENERIC is not set
# CONFIG_BLK_DEV_PLATFORM is not set
CONFIG_BLK_DEV_Q40IDE=y
-
-#
-# Other IDE chipsets support
-#
-
-#
-# Note: most of these also require special kernel boot parameters
-#
-# CONFIG_BLK_DEV_4DRIVES is not set
-# CONFIG_BLK_DEV_ALI14XX is not set
-# CONFIG_BLK_DEV_DTC2278 is not set
-# CONFIG_BLK_DEV_HT6560B is not set
-# CONFIG_BLK_DEV_QD65XX is not set
-# CONFIG_BLK_DEV_UMC8672 is not set
# CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDE_ARCH_OBSOLETE_INIT is not set
+# CONFIG_BLK_DEV_HD_ONLY is not set
# CONFIG_BLK_DEV_HD is not set
#
@@ -603,6 +593,7 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
@@ -692,6 +683,7 @@
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -714,12 +706,7 @@
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
@@ -736,12 +723,22 @@
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
@@ -759,8 +756,8 @@
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
@@ -810,11 +807,8 @@
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -840,16 +834,15 @@
# CONFIG_JFS_SECURITY is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
-CONFIG_FS_POSIX_ACL=y
+# CONFIG_FS_POSIX_ACL is not set
CONFIG_XFS_FS=m
# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
-CONFIG_GFS2_FS=m
-CONFIG_GFS2_FS_LOCKING_NOLOCK=m
-CONFIG_GFS2_FS_LOCKING_DLM=m
+# CONFIG_XFS_DEBUG is not set
CONFIG_OCFS2_FS=m
+CONFIG_OCFS2_FS_O2CB=m
+CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
@@ -921,12 +914,10 @@
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
@@ -999,6 +990,7 @@
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -1018,53 +1010,82 @@
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_SEQIV=m
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_SEQIV=m
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+
+#
+# Hash modes
+#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_XTS=m
-CONFIG_CRYPTO_CTR=m
-CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_CCM=m
-CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_LZO=m
# CONFIG_CRYPTO_HW is not set
@@ -1072,9 +1093,11 @@
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
diff --git a/arch/m68k/configs/sun3_defconfig b/arch/m68k/configs/sun3_defconfig
index bd2b9c4..296340d 100644
--- a/arch/m68k/configs/sun3_defconfig
+++ b/arch/m68k/configs/sun3_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc8
-# Wed Apr 2 20:46:22 2008
+# Linux kernel version: 2.6.26-rc4
+# Wed May 28 22:47:35 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
@@ -52,13 +52,14 @@
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
@@ -76,12 +77,14 @@
# CONFIG_HAVE_OPROFILE is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
@@ -130,6 +133,7 @@
CONFIG_NEED_MULTIPLE_NODES=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
@@ -208,8 +212,10 @@
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
@@ -225,6 +231,7 @@
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
# CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CT_PROTO_DCCP is not set
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
@@ -303,6 +310,8 @@
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
@@ -396,8 +405,6 @@
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -529,6 +536,7 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
@@ -612,6 +620,7 @@
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -633,12 +642,7 @@
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
@@ -655,12 +659,22 @@
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
@@ -678,8 +692,8 @@
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
@@ -726,11 +740,8 @@
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -756,16 +767,15 @@
# CONFIG_JFS_SECURITY is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
-CONFIG_FS_POSIX_ACL=y
+# CONFIG_FS_POSIX_ACL is not set
CONFIG_XFS_FS=m
# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
-CONFIG_GFS2_FS=m
-CONFIG_GFS2_FS_LOCKING_NOLOCK=m
-CONFIG_GFS2_FS_LOCKING_DLM=m
+# CONFIG_XFS_DEBUG is not set
CONFIG_OCFS2_FS=m
+CONFIG_OCFS2_FS_O2CB=m
+CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
@@ -837,12 +847,10 @@
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
@@ -917,6 +925,7 @@
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -936,53 +945,82 @@
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_SEQIV=m
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_SEQIV=m
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+
+#
+# Hash modes
+#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_XTS=m
-CONFIG_CRYPTO_CTR=m
-CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_CCM=m
-CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_LZO=m
# CONFIG_CRYPTO_HW is not set
@@ -990,9 +1028,11 @@
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
diff --git a/arch/m68k/configs/sun3x_defconfig b/arch/m68k/configs/sun3x_defconfig
index f18154f..8d3a416 100644
--- a/arch/m68k/configs/sun3x_defconfig
+++ b/arch/m68k/configs/sun3x_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc8
-# Wed Apr 2 20:46:23 2008
+# Linux kernel version: 2.6.26-rc4
+# Wed May 28 22:47:35 2008
#
CONFIG_M68K=y
CONFIG_MMU=y
@@ -52,13 +52,14 @@
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
@@ -76,12 +77,14 @@
# CONFIG_HAVE_OPROFILE is not set
# CONFIG_HAVE_KPROBES is not set
# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
@@ -141,6 +144,7 @@
CONFIG_NEED_MULTIPLE_NODES=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
@@ -219,8 +223,10 @@
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
@@ -236,6 +242,7 @@
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
# CONFIG_NF_CONNTRACK_EVENTS is not set
+# CONFIG_NF_CT_PROTO_DCCP is not set
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
@@ -314,6 +321,8 @@
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
@@ -407,8 +416,6 @@
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -539,6 +546,7 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
@@ -622,6 +630,7 @@
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -643,12 +652,7 @@
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
@@ -665,12 +669,22 @@
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
@@ -688,8 +702,8 @@
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
@@ -736,11 +750,8 @@
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -766,16 +777,15 @@
# CONFIG_JFS_SECURITY is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
-CONFIG_FS_POSIX_ACL=y
+# CONFIG_FS_POSIX_ACL is not set
CONFIG_XFS_FS=m
# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
-CONFIG_GFS2_FS=m
-CONFIG_GFS2_FS_LOCKING_NOLOCK=m
-CONFIG_GFS2_FS_LOCKING_DLM=m
+# CONFIG_XFS_DEBUG is not set
CONFIG_OCFS2_FS=m
+CONFIG_OCFS2_FS_O2CB=m
+CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
@@ -847,12 +857,10 @@
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
-CONFIG_NFSD_TCP=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
@@ -927,6 +935,7 @@
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -946,53 +955,82 @@
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_SEQIV=m
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_SEQIV=m
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+
+#
+# Hash modes
+#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_NULL=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_XTS=m
-CONFIG_CRYPTO_CTR=m
-CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_CCM=m
-CONFIG_CRYPTO_CRYPTD=m
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_LZO=m
# CONFIG_CRYPTO_HW is not set
@@ -1000,9 +1038,11 @@
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_GENERIC_FIND_NEXT_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
diff --git a/arch/m68k/kernel/head.S b/arch/m68k/kernel/head.S
index faa6764..f513f53 100644
--- a/arch/m68k/kernel/head.S
+++ b/arch/m68k/kernel/head.S
@@ -1434,7 +1434,7 @@
#endif
#ifdef CONFIG_HP300
- is_not_hp300(1f)
+ is_not_hp300(2f)
/*
* Fix up the iobase register to point to the new location of the LEDs.
*/
diff --git a/arch/m68k/kernel/process.c b/arch/m68k/kernel/process.c
index 5de4e4e..7888cdf 100644
--- a/arch/m68k/kernel/process.c
+++ b/arch/m68k/kernel/process.c
@@ -41,7 +41,6 @@
* setup.
*/
static struct fs_struct init_fs = INIT_FS;
-static struct files_struct init_files = INIT_FILES;
static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
struct mm_struct init_mm = INIT_MM(init_mm);
diff --git a/arch/m68k/kernel/setup.c b/arch/m68k/kernel/setup.c
index bba6503..a9fb83a 100644
--- a/arch/m68k/kernel/setup.c
+++ b/arch/m68k/kernel/setup.c
@@ -41,11 +41,12 @@
#endif
unsigned long m68k_machtype;
-unsigned long m68k_cputype;
EXPORT_SYMBOL(m68k_machtype);
+unsigned long m68k_cputype;
EXPORT_SYMBOL(m68k_cputype);
unsigned long m68k_fputype;
unsigned long m68k_mmutype;
+EXPORT_SYMBOL(m68k_mmutype);
#ifdef CONFIG_VME
unsigned long vme_brdtype;
EXPORT_SYMBOL(vme_brdtype);
@@ -345,19 +346,19 @@
/* set ISA defs early as possible */
#if defined(CONFIG_ISA) && defined(MULTI_ISA)
-#if defined(CONFIG_Q40)
if (MACH_IS_Q40) {
- isa_type = Q40_ISA;
+ isa_type = ISA_TYPE_Q40;
isa_sex = 0;
}
-#elif defined(CONFIG_GG2)
+#ifdef CONFIG_GG2
if (MACH_IS_AMIGA && AMIGAHW_PRESENT(GG2_ISA)) {
- isa_type = GG2_ISA;
+ isa_type = ISA_TYPE_GG2;
isa_sex = 0;
}
-#elif defined(CONFIG_AMIGA_PCMCIA)
+#endif
+#ifdef CONFIG_AMIGA_PCMCIA
if (MACH_IS_AMIGA && AMIGAHW_PRESENT(PCMCIA)) {
- isa_type = AG_ISA;
+ isa_type = ISA_TYPE_AG;
isa_sex = 1;
}
#endif
diff --git a/arch/m68k/lib/string.c b/arch/m68k/lib/string.c
index 891e134..4253f87 100644
--- a/arch/m68k/lib/string.c
+++ b/arch/m68k/lib/string.c
@@ -15,6 +15,12 @@
}
EXPORT_SYMBOL(strcpy);
+char *strcat(char *dest, const char *src)
+{
+ return __kernel_strcpy(dest + __kernel_strlen(dest), src);
+}
+EXPORT_SYMBOL(strcat);
+
void *memset(void *s, int c, size_t count)
{
void *xs = s;
diff --git a/arch/m68knommu/Kconfig b/arch/m68knommu/Kconfig
index 07eb4c4..8e84415 100644
--- a/arch/m68knommu/Kconfig
+++ b/arch/m68knommu/Kconfig
@@ -671,6 +671,9 @@
endchoice
+if COLDFIRE
+source "kernel/Kconfig.preempt"
+endif
source "mm/Kconfig"
endmenu
diff --git a/arch/m68knommu/kernel/init_task.c b/arch/m68knommu/kernel/init_task.c
index 3897043..344c01a 100644
--- a/arch/m68knommu/kernel/init_task.c
+++ b/arch/m68knommu/kernel/init_task.c
@@ -13,7 +13,6 @@
#include <asm/pgtable.h>
static struct fs_struct init_fs = INIT_FS;
-static struct files_struct init_files = INIT_FILES;
static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
struct mm_struct init_mm = INIT_MM(init_mm);
diff --git a/arch/m68knommu/kernel/vmlinux.lds.S b/arch/m68knommu/kernel/vmlinux.lds.S
index 5592e0b..93e69236 100644
--- a/arch/m68knommu/kernel/vmlinux.lds.S
+++ b/arch/m68knommu/kernel/vmlinux.lds.S
@@ -114,6 +114,16 @@
*(__kcrctab_gpl)
__stop___kcrctab_gpl = .;
+ /* Kernel symbol table: Normal unused symbols */
+ __start___kcrctab_unused = .;
+ *(__kcrctab_unused)
+ __stop___kcrctab_unused = .;
+
+ /* Kernel symbol table: GPL-only unused symbols */
+ __start___kcrctab_unused_gpl = .;
+ *(__kcrctab_unused_gpl)
+ __stop___kcrctab_unused_gpl = .;
+
/* Kernel symbol table: GPL-future symbols */
__start___kcrctab_gpl_future = .;
*(__kcrctab_gpl_future)
diff --git a/arch/m68knommu/platform/coldfire/timers.c b/arch/m68knommu/platform/coldfire/timers.c
index ba5a9f3..454f254 100644
--- a/arch/m68knommu/platform/coldfire/timers.c
+++ b/arch/m68knommu/platform/coldfire/timers.c
@@ -111,7 +111,13 @@
__raw_writew(MCFTIMER_TMR_DISABLE, TA(MCFTIMER_TMR));
mcftmr_cycles_per_jiffy = FREQ / HZ;
- __raw_writetrr(mcftmr_cycles_per_jiffy, TA(MCFTIMER_TRR));
+ /*
+ * The coldfire timer runs from 0 to TRR included, then 0
+ * again and so on. It counts thus actually TRR + 1 steps
+ * for 1 tick, not TRR. So if you want n cycles,
+ * initialize TRR with n - 1.
+ */
+ __raw_writetrr(mcftmr_cycles_per_jiffy - 1, TA(MCFTIMER_TRR));
__raw_writew(MCFTIMER_TMR_ENORI | MCFTIMER_TMR_CLK16 |
MCFTIMER_TMR_RESTART | MCFTIMER_TMR_ENABLE, TA(MCFTIMER_TMR));
diff --git a/arch/mips/au1000/common/Makefile b/arch/mips/au1000/common/Makefile
index 90e2d7a..dd0e19d 100644
--- a/arch/mips/au1000/common/Makefile
+++ b/arch/mips/au1000/common/Makefile
@@ -1,9 +1,8 @@
#
-# Copyright 2000 MontaVista Software Inc.
-# Author: MontaVista Software, Inc.
-# ppopov@mvista.com or source@mvista.com
+# Copyright 2000, 2008 MontaVista Software Inc.
+# Author: MontaVista Software, Inc. <source@mvista.com>
#
-# Makefile for the Alchemy Au1000 CPU, generic files.
+# Makefile for the Alchemy Au1xx0 CPUs, generic files.
#
obj-y += prom.o irq.o puts.o time.o reset.o \
diff --git a/arch/mips/au1000/common/au1xxx_irqmap.c b/arch/mips/au1000/common/au1xxx_irqmap.c
index 37a10a0..c7ca159 100644
--- a/arch/mips/au1000/common/au1xxx_irqmap.c
+++ b/arch/mips/au1000/common/au1xxx_irqmap.c
@@ -40,20 +40,20 @@
struct au1xxx_irqmap __initdata au1xxx_ic0_map[] = {
#if defined(CONFIG_SOC_AU1000)
- { AU1000_UART0_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_UART1_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_UART2_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_UART3_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_SSI0_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_SSI1_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_DMA_INT_BASE, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_DMA_INT_BASE+1, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_DMA_INT_BASE+2, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_DMA_INT_BASE+3, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_DMA_INT_BASE+4, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_DMA_INT_BASE+5, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_DMA_INT_BASE+6, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_DMA_INT_BASE+7, INTC_INT_HIGH_LEVEL, 0},
+ { AU1000_UART0_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_UART1_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_UART2_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_UART3_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_SSI0_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_SSI1_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_DMA_INT_BASE, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_DMA_INT_BASE+1, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_DMA_INT_BASE+2, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_DMA_INT_BASE+3, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_DMA_INT_BASE+4, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_DMA_INT_BASE+5, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_DMA_INT_BASE+6, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_DMA_INT_BASE+7, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
@@ -62,32 +62,32 @@
{ AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1000_IRDA_TX_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_IRDA_RX_INT, INTC_INT_HIGH_LEVEL, 0},
+ { AU1000_IRDA_TX_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_IRDA_RX_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_USB_DEV_REQ_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_USB_HOST_INT, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_ACSYNC_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1000_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_MAC1_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
+ { AU1000_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_MAC1_DMA_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_AC97C_INT, INTC_INT_RISE_EDGE, 0 },
#elif defined(CONFIG_SOC_AU1500)
- { AU1500_UART0_INT, INTC_INT_HIGH_LEVEL, 0},
+ { AU1500_UART0_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_PCI_INTA, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_PCI_INTB, INTC_INT_LOW_LEVEL, 0 },
- { AU1500_UART3_INT, INTC_INT_HIGH_LEVEL, 0},
+ { AU1500_UART3_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_PCI_INTC, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_PCI_INTD, INTC_INT_LOW_LEVEL, 0 },
- { AU1000_DMA_INT_BASE, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_DMA_INT_BASE+1, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_DMA_INT_BASE+2, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_DMA_INT_BASE+3, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_DMA_INT_BASE+4, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_DMA_INT_BASE+5, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_DMA_INT_BASE+6, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_DMA_INT_BASE+7, INTC_INT_HIGH_LEVEL, 0},
+ { AU1000_DMA_INT_BASE, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_DMA_INT_BASE+1, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_DMA_INT_BASE+2, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_DMA_INT_BASE+3, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_DMA_INT_BASE+4, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_DMA_INT_BASE+5, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_DMA_INT_BASE+6, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_DMA_INT_BASE+7, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
@@ -100,26 +100,26 @@
{ AU1000_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_USB_HOST_INT, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_ACSYNC_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1500_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1500_MAC1_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
+ { AU1500_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1500_MAC1_DMA_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_AC97C_INT, INTC_INT_RISE_EDGE, 0 },
#elif defined(CONFIG_SOC_AU1100)
- { AU1100_UART0_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1100_UART1_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1100_SD_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1100_UART3_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_SSI0_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_SSI1_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_DMA_INT_BASE, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_DMA_INT_BASE+1, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_DMA_INT_BASE+2, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_DMA_INT_BASE+3, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_DMA_INT_BASE+4, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_DMA_INT_BASE+5, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_DMA_INT_BASE+6, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_DMA_INT_BASE+7, INTC_INT_HIGH_LEVEL, 0},
+ { AU1100_UART0_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1100_UART1_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1100_SD_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1100_UART3_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_SSI0_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_SSI1_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_DMA_INT_BASE, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_DMA_INT_BASE+1, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_DMA_INT_BASE+2, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_DMA_INT_BASE+3, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_DMA_INT_BASE+4, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_DMA_INT_BASE+5, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_DMA_INT_BASE+6, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_DMA_INT_BASE+7, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
@@ -128,33 +128,33 @@
{ AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1000_IRDA_TX_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1000_IRDA_RX_INT, INTC_INT_HIGH_LEVEL, 0},
+ { AU1000_IRDA_TX_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1000_IRDA_RX_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_USB_DEV_REQ_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_USB_HOST_INT, INTC_INT_LOW_LEVEL, 0 },
{ AU1000_ACSYNC_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1100_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
- /*{ AU1000_GPIO215_208_INT, INTC_INT_HIGH_LEVEL, 0},*/
- { AU1100_LCD_INT, INTC_INT_HIGH_LEVEL, 0},
+ { AU1100_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0 },
+ /* { AU1000_GPIO215_208_INT, INTC_INT_HIGH_LEVEL, 0 }, */
+ { AU1100_LCD_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_AC97C_INT, INTC_INT_RISE_EDGE, 0 },
#elif defined(CONFIG_SOC_AU1550)
- { AU1550_UART0_INT, INTC_INT_HIGH_LEVEL, 0},
+ { AU1550_UART0_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1550_PCI_INTA, INTC_INT_LOW_LEVEL, 0 },
{ AU1550_PCI_INTB, INTC_INT_LOW_LEVEL, 0 },
- { AU1550_DDMA_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1550_CRYPTO_INT, INTC_INT_HIGH_LEVEL, 0},
+ { AU1550_DDMA_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1550_CRYPTO_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1550_PCI_INTC, INTC_INT_LOW_LEVEL, 0 },
{ AU1550_PCI_INTD, INTC_INT_LOW_LEVEL, 0 },
{ AU1550_PCI_RST_INT, INTC_INT_LOW_LEVEL, 0 },
- { AU1550_UART1_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1550_UART3_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1550_PSC0_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1550_PSC1_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1550_PSC2_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1550_PSC3_INT, INTC_INT_HIGH_LEVEL, 0},
+ { AU1550_UART1_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1550_UART3_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1550_PSC0_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1550_PSC1_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1550_PSC2_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1550_PSC3_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
@@ -163,26 +163,26 @@
{ AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1550_NAND_INT, INTC_INT_RISE_EDGE, 0},
+ { AU1550_NAND_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1550_USB_DEV_REQ_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1550_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1550_USB_HOST_INT, INTC_INT_LOW_LEVEL, 0 },
- { AU1550_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1550_MAC1_DMA_INT, INTC_INT_HIGH_LEVEL, 0},
+ { AU1550_MAC0_DMA_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1550_MAC1_DMA_INT, INTC_INT_HIGH_LEVEL, 0 },
#elif defined(CONFIG_SOC_AU1200)
- { AU1200_UART0_INT, INTC_INT_HIGH_LEVEL, 0},
+ { AU1200_UART0_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1200_SWT_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1200_SD_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1200_DDMA_INT, INTC_INT_HIGH_LEVEL, 0},
+ { AU1200_SD_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1200_DDMA_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1200_MAE_BE_INT, INTC_INT_HIGH_LEVEL, 0 },
- { AU1200_UART1_INT, INTC_INT_HIGH_LEVEL, 0},
+ { AU1200_UART1_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1200_MAE_FE_INT, INTC_INT_HIGH_LEVEL, 0 },
- { AU1200_PSC0_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1200_PSC1_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1200_AES_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1200_CAMERA_INT, INTC_INT_HIGH_LEVEL, 0},
+ { AU1200_PSC0_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1200_PSC1_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1200_AES_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1200_CAMERA_INT, INTC_INT_HIGH_LEVEL, 0 },
{ AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
@@ -191,10 +191,10 @@
{ AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
- { AU1200_NAND_INT, INTC_INT_RISE_EDGE, 0},
+ { AU1200_NAND_INT, INTC_INT_RISE_EDGE, 0 },
{ AU1200_USB_INT, INTC_INT_HIGH_LEVEL, 0 },
- { AU1200_LCD_INT, INTC_INT_HIGH_LEVEL, 0},
- { AU1200_MAE_BOTH_INT, INTC_INT_HIGH_LEVEL, 0},
+ { AU1200_LCD_INT, INTC_INT_HIGH_LEVEL, 0 },
+ { AU1200_MAE_BOTH_INT, INTC_INT_HIGH_LEVEL, 0 },
#else
#error "Error: Unknown Alchemy SOC"
@@ -203,4 +203,3 @@
};
int __initdata au1xxx_ic0_nr_irqs = ARRAY_SIZE(au1xxx_ic0_map);
-
diff --git a/arch/mips/au1000/common/clocks.c b/arch/mips/au1000/common/clocks.c
index 3ce6cac..043429d 100644
--- a/arch/mips/au1000/common/clocks.c
+++ b/arch/mips/au1000/common/clocks.c
@@ -1,10 +1,9 @@
/*
* BRIEF MODULE DESCRIPTION
- * Simple Au1000 clocks routines.
+ * Simple Au1xx0 clocks routines.
*
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2001, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -30,8 +29,8 @@
#include <linux/module.h>
#include <asm/mach-au1x00/au1000.h>
-static unsigned int au1x00_clock; // Hz
-static unsigned int lcd_clock; // KHz
+static unsigned int au1x00_clock; /* Hz */
+static unsigned int lcd_clock; /* KHz */
static unsigned long uart_baud_base;
/*
@@ -46,8 +45,7 @@
{
return au1x00_clock;
}
-
-
+EXPORT_SYMBOL(get_au1x00_speed);
/*
* The UART baud base is not known at compile time ... if
@@ -73,24 +71,23 @@
void set_au1x00_lcd_clock(void)
{
unsigned int static_cfg0;
- unsigned int sys_busclk =
- (get_au1x00_speed()/1000) /
- ((int)(au_readl(SYS_POWERCTRL)&0x03) + 2);
+ unsigned int sys_busclk = (get_au1x00_speed() / 1000) /
+ ((int)(au_readl(SYS_POWERCTRL) & 0x03) + 2);
static_cfg0 = au_readl(MEM_STCFG0);
- if (static_cfg0 & (1<<11))
+ if (static_cfg0 & (1 << 11))
lcd_clock = sys_busclk / 5; /* note: BCLK switching fails with D5 */
else
lcd_clock = sys_busclk / 4;
if (lcd_clock > 50000) /* Epson MAX */
- printk("warning: LCD clock too high (%d KHz)\n", lcd_clock);
+ printk(KERN_WARNING "warning: LCD clock too high (%u KHz)\n",
+ lcd_clock);
}
unsigned int get_au1x00_lcd_clock(void)
{
return lcd_clock;
}
-
EXPORT_SYMBOL(get_au1x00_lcd_clock);
diff --git a/arch/mips/au1000/common/cputable.c b/arch/mips/au1000/common/cputable.c
index 8c93a05..ba6430b 100644
--- a/arch/mips/au1000/common/cputable.c
+++ b/arch/mips/au1000/common/cputable.c
@@ -14,7 +14,7 @@
#include <asm/mach-au1x00/au1000.h>
-struct cpu_spec* cur_cpu_spec[NR_CPUS];
+struct cpu_spec *cur_cpu_spec[NR_CPUS];
/* With some thought, we can probably use the mask to reduce the
* size of the table.
@@ -39,8 +39,7 @@
{ 0x00000000, 0x00000000, "Unknown Au1xxx", 1, 0, 0 }
};
-void
-set_cpuspec(void)
+void set_cpuspec(void)
{
struct cpu_spec *sp;
u32 prid;
diff --git a/arch/mips/au1000/common/dbdma.c b/arch/mips/au1000/common/dbdma.c
index 53377df..601ee91 100644
--- a/arch/mips/au1000/common/dbdma.c
+++ b/arch/mips/au1000/common/dbdma.c
@@ -53,12 +53,11 @@
*/
static DEFINE_SPINLOCK(au1xxx_dbdma_spin_lock);
-/* I couldn't find a macro that did this......
-*/
+/* I couldn't find a macro that did this... */
#define ALIGN_ADDR(x, a) ((((u32)(x)) + (a-1)) & ~(a-1))
static dbdma_global_t *dbdma_gptr = (dbdma_global_t *)DDMA_GLOBAL_BASE;
-static int dbdma_initialized=0;
+static int dbdma_initialized;
static void au1xxx_dbdma_init(void);
static dbdev_tab_t dbdev_tab[] = {
@@ -149,7 +148,7 @@
{ DSCR_CMD0_NAND_FLASH, DEV_FLAGS_IN, 0, 0, 0x00000000, 0, 0 },
-#endif // CONFIG_SOC_AU1200
+#endif /* CONFIG_SOC_AU1200 */
{ DSCR_CMD0_THROTTLE, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
{ DSCR_CMD0_ALWAYS, DEV_FLAGS_ANYUSE, 0, 0, 0x00000000, 0, 0 },
@@ -177,8 +176,7 @@
static chan_tab_t *chan_tab_ptr[NUM_DBDMA_CHANS];
-static dbdev_tab_t *
-find_dbdev_id(u32 id)
+static dbdev_tab_t *find_dbdev_id(u32 id)
{
int i;
dbdev_tab_t *p;
@@ -190,29 +188,27 @@
return NULL;
}
-void * au1xxx_ddma_get_nextptr_virt(au1x_ddma_desc_t *dp)
+void *au1xxx_ddma_get_nextptr_virt(au1x_ddma_desc_t *dp)
{
- return phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
+ return phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
}
EXPORT_SYMBOL(au1xxx_ddma_get_nextptr_virt);
-u32
-au1xxx_ddma_add_device(dbdev_tab_t *dev)
+u32 au1xxx_ddma_add_device(dbdev_tab_t *dev)
{
u32 ret = 0;
- dbdev_tab_t *p=NULL;
- static u16 new_id=0x1000;
+ dbdev_tab_t *p;
+ static u16 new_id = 0x1000;
p = find_dbdev_id(~0);
- if ( NULL != p )
- {
+ if (NULL != p) {
memcpy(p, dev, sizeof(dbdev_tab_t));
p->dev_id = DSCR_DEV2CUSTOM_ID(new_id, dev->dev_id);
ret = p->dev_id;
new_id++;
#if 0
- printk("add_device: id:%x flags:%x padd:%x\n",
- p->dev_id, p->dev_flags, p->dev_physaddr );
+ printk(KERN_DEBUG "add_device: id:%x flags:%x padd:%x\n",
+ p->dev_id, p->dev_flags, p->dev_physaddr);
#endif
}
@@ -220,10 +216,19 @@
}
EXPORT_SYMBOL(au1xxx_ddma_add_device);
-/* Allocate a channel and return a non-zero descriptor if successful.
-*/
-u32
-au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
+void au1xxx_ddma_del_device(u32 devid)
+{
+ dbdev_tab_t *p = find_dbdev_id(devid);
+
+ if (p != NULL) {
+ memset(p, 0, sizeof(dbdev_tab_t));
+ p->dev_id = ~0;
+ }
+}
+EXPORT_SYMBOL(au1xxx_ddma_del_device);
+
+/* Allocate a channel and return a non-zero descriptor if successful. */
+u32 au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
void (*callback)(int, void *), void *callparam)
{
unsigned long flags;
@@ -234,7 +239,8 @@
chan_tab_t *ctp;
au1x_dma_chan_t *cp;
- /* We do the intialization on the first channel allocation.
+ /*
+ * We do the intialization on the first channel allocation.
* We have to wait because of the interrupt handler initialization
* which can't be done successfully during board set up.
*/
@@ -242,16 +248,17 @@
au1xxx_dbdma_init();
dbdma_initialized = 1;
- if ((stp = find_dbdev_id(srcid)) == NULL)
+ stp = find_dbdev_id(srcid);
+ if (stp == NULL)
return 0;
- if ((dtp = find_dbdev_id(destid)) == NULL)
+ dtp = find_dbdev_id(destid);
+ if (dtp == NULL)
return 0;
used = 0;
rv = 0;
- /* Check to see if we can get both channels.
- */
+ /* Check to see if we can get both channels. */
spin_lock_irqsave(&au1xxx_dbdma_spin_lock, flags);
if (!(stp->dev_flags & DEV_FLAGS_INUSE) ||
(stp->dev_flags & DEV_FLAGS_ANYUSE)) {
@@ -261,35 +268,30 @@
(dtp->dev_flags & DEV_FLAGS_ANYUSE)) {
/* Got destination */
dtp->dev_flags |= DEV_FLAGS_INUSE;
- }
- else {
- /* Can't get dest. Release src.
- */
+ } else {
+ /* Can't get dest. Release src. */
stp->dev_flags &= ~DEV_FLAGS_INUSE;
used++;
}
- }
- else {
+ } else
used++;
- }
spin_unlock_irqrestore(&au1xxx_dbdma_spin_lock, flags);
if (!used) {
- /* Let's see if we can allocate a channel for it.
- */
+ /* Let's see if we can allocate a channel for it. */
ctp = NULL;
chan = 0;
spin_lock_irqsave(&au1xxx_dbdma_spin_lock, flags);
- for (i=0; i<NUM_DBDMA_CHANS; i++) {
+ for (i = 0; i < NUM_DBDMA_CHANS; i++)
if (chan_tab_ptr[i] == NULL) {
- /* If kmalloc fails, it is caught below same
+ /*
+ * If kmalloc fails, it is caught below same
* as a channel not available.
*/
ctp = kmalloc(sizeof(chan_tab_t), GFP_ATOMIC);
chan_tab_ptr[i] = ctp;
break;
}
- }
spin_unlock_irqrestore(&au1xxx_dbdma_spin_lock, flags);
if (ctp != NULL) {
@@ -304,8 +306,7 @@
ctp->chan_callback = callback;
ctp->chan_callparam = callparam;
- /* Initialize channel configuration.
- */
+ /* Initialize channel configuration. */
i = 0;
if (stp->dev_intlevel)
i |= DDMA_CFG_SED;
@@ -326,8 +327,7 @@
* operations.
*/
rv = (u32)(&chan_tab_ptr[chan]);
- }
- else {
+ } else {
/* Release devices */
stp->dev_flags &= ~DEV_FLAGS_INUSE;
dtp->dev_flags &= ~DEV_FLAGS_INUSE;
@@ -337,11 +337,11 @@
}
EXPORT_SYMBOL(au1xxx_dbdma_chan_alloc);
-/* Set the device width if source or destination is a FIFO.
+/*
+ * Set the device width if source or destination is a FIFO.
* Should be 8, 16, or 32 bits.
*/
-u32
-au1xxx_dbdma_set_devwidth(u32 chanid, int bits)
+u32 au1xxx_dbdma_set_devwidth(u32 chanid, int bits)
{
u32 rv;
chan_tab_t *ctp;
@@ -365,10 +365,8 @@
}
EXPORT_SYMBOL(au1xxx_dbdma_set_devwidth);
-/* Allocate a descriptor ring, initializing as much as possible.
-*/
-u32
-au1xxx_dbdma_ring_alloc(u32 chanid, int entries)
+/* Allocate a descriptor ring, initializing as much as possible. */
+u32 au1xxx_dbdma_ring_alloc(u32 chanid, int entries)
{
int i;
u32 desc_base, srcid, destid;
@@ -378,43 +376,45 @@
dbdev_tab_t *stp, *dtp;
au1x_ddma_desc_t *dp;
- /* I guess we could check this to be within the
+ /*
+ * I guess we could check this to be within the
* range of the table......
*/
ctp = *((chan_tab_t **)chanid);
stp = ctp->chan_src;
dtp = ctp->chan_dest;
- /* The descriptors must be 32-byte aligned. There is a
+ /*
+ * The descriptors must be 32-byte aligned. There is a
* possibility the allocation will give us such an address,
* and if we try that first we are likely to not waste larger
* slabs of memory.
*/
desc_base = (u32)kmalloc(entries * sizeof(au1x_ddma_desc_t),
- GFP_KERNEL|GFP_DMA);
+ GFP_KERNEL|GFP_DMA);
if (desc_base == 0)
return 0;
if (desc_base & 0x1f) {
- /* Lost....do it again, allocate extra, and round
+ /*
+ * Lost....do it again, allocate extra, and round
* the address base.
*/
kfree((const void *)desc_base);
i = entries * sizeof(au1x_ddma_desc_t);
i += (sizeof(au1x_ddma_desc_t) - 1);
- if ((desc_base = (u32)kmalloc(i, GFP_KERNEL|GFP_DMA)) == 0)
+ desc_base = (u32)kmalloc(i, GFP_KERNEL|GFP_DMA);
+ if (desc_base == 0)
return 0;
desc_base = ALIGN_ADDR(desc_base, sizeof(au1x_ddma_desc_t));
}
dp = (au1x_ddma_desc_t *)desc_base;
- /* Keep track of the base descriptor.
- */
+ /* Keep track of the base descriptor. */
ctp->chan_desc_base = dp;
- /* Initialize the rings with as much information as we know.
- */
+ /* Initialize the rings with as much information as we know. */
srcid = stp->dev_id;
destid = dtp->dev_id;
@@ -426,11 +426,12 @@
cmd0 |= DSCR_CMD0_IE | DSCR_CMD0_CV;
cmd0 |= DSCR_CMD0_ST(DSCR_CMD0_ST_NOCHANGE);
- /* is it mem to mem transfer? */
- if(((DSCR_CUSTOM2DEV_ID(srcid) == DSCR_CMD0_THROTTLE) || (DSCR_CUSTOM2DEV_ID(srcid) == DSCR_CMD0_ALWAYS)) &&
- ((DSCR_CUSTOM2DEV_ID(destid) == DSCR_CMD0_THROTTLE) || (DSCR_CUSTOM2DEV_ID(destid) == DSCR_CMD0_ALWAYS))) {
- cmd0 |= DSCR_CMD0_MEM;
- }
+ /* Is it mem to mem transfer? */
+ if (((DSCR_CUSTOM2DEV_ID(srcid) == DSCR_CMD0_THROTTLE) ||
+ (DSCR_CUSTOM2DEV_ID(srcid) == DSCR_CMD0_ALWAYS)) &&
+ ((DSCR_CUSTOM2DEV_ID(destid) == DSCR_CMD0_THROTTLE) ||
+ (DSCR_CUSTOM2DEV_ID(destid) == DSCR_CMD0_ALWAYS)))
+ cmd0 |= DSCR_CMD0_MEM;
switch (stp->dev_devwidth) {
case 8:
@@ -458,15 +459,17 @@
break;
}
- /* If the device is marked as an in/out FIFO, ensure it is
+ /*
+ * If the device is marked as an in/out FIFO, ensure it is
* set non-coherent.
*/
if (stp->dev_flags & DEV_FLAGS_IN)
- cmd0 |= DSCR_CMD0_SN; /* Source in fifo */
+ cmd0 |= DSCR_CMD0_SN; /* Source in FIFO */
if (dtp->dev_flags & DEV_FLAGS_OUT)
- cmd0 |= DSCR_CMD0_DN; /* Destination out fifo */
+ cmd0 |= DSCR_CMD0_DN; /* Destination out FIFO */
- /* Set up source1. For now, assume no stride and increment.
+ /*
+ * Set up source1. For now, assume no stride and increment.
* A channel attribute update can change this later.
*/
switch (stp->dev_tsize) {
@@ -485,19 +488,19 @@
break;
}
- /* If source input is fifo, set static address.
- */
+ /* If source input is FIFO, set static address. */
if (stp->dev_flags & DEV_FLAGS_IN) {
- if ( stp->dev_flags & DEV_FLAGS_BURSTABLE )
+ if (stp->dev_flags & DEV_FLAGS_BURSTABLE)
src1 |= DSCR_SRC1_SAM(DSCR_xAM_BURST);
else
- src1 |= DSCR_SRC1_SAM(DSCR_xAM_STATIC);
-
+ src1 |= DSCR_SRC1_SAM(DSCR_xAM_STATIC);
}
+
if (stp->dev_physaddr)
src0 = stp->dev_physaddr;
- /* Set up dest1. For now, assume no stride and increment.
+ /*
+ * Set up dest1. For now, assume no stride and increment.
* A channel attribute update can change this later.
*/
switch (dtp->dev_tsize) {
@@ -516,22 +519,24 @@
break;
}
- /* If destination output is fifo, set static address.
- */
+ /* If destination output is FIFO, set static address. */
if (dtp->dev_flags & DEV_FLAGS_OUT) {
- if ( dtp->dev_flags & DEV_FLAGS_BURSTABLE )
- dest1 |= DSCR_DEST1_DAM(DSCR_xAM_BURST);
- else
- dest1 |= DSCR_DEST1_DAM(DSCR_xAM_STATIC);
+ if (dtp->dev_flags & DEV_FLAGS_BURSTABLE)
+ dest1 |= DSCR_DEST1_DAM(DSCR_xAM_BURST);
+ else
+ dest1 |= DSCR_DEST1_DAM(DSCR_xAM_STATIC);
}
+
if (dtp->dev_physaddr)
dest0 = dtp->dev_physaddr;
#if 0
- printk("did:%x sid:%x cmd0:%x cmd1:%x source0:%x source1:%x dest0:%x dest1:%x\n",
- dtp->dev_id, stp->dev_id, cmd0, cmd1, src0, src1, dest0, dest1 );
+ printk(KERN_DEBUG "did:%x sid:%x cmd0:%x cmd1:%x source0:%x "
+ "source1:%x dest0:%x dest1:%x\n",
+ dtp->dev_id, stp->dev_id, cmd0, cmd1, src0,
+ src1, dest0, dest1);
#endif
- for (i=0; i<entries; i++) {
+ for (i = 0; i < entries; i++) {
dp->dscr_cmd0 = cmd0;
dp->dscr_cmd1 = cmd1;
dp->dscr_source0 = src0;
@@ -545,49 +550,49 @@
dp++;
}
- /* Make last descrptor point to the first.
- */
+ /* Make last descrptor point to the first. */
dp--;
dp->dscr_nxtptr = DSCR_NXTPTR(virt_to_phys(ctp->chan_desc_base));
ctp->get_ptr = ctp->put_ptr = ctp->cur_ptr = ctp->chan_desc_base;
- return (u32)(ctp->chan_desc_base);
+ return (u32)ctp->chan_desc_base;
}
EXPORT_SYMBOL(au1xxx_dbdma_ring_alloc);
-/* Put a source buffer into the DMA ring.
+/*
+ * Put a source buffer into the DMA ring.
* This updates the source pointer and byte count. Normally used
* for memory to fifo transfers.
*/
-u32
-_au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes, u32 flags)
+u32 _au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes, u32 flags)
{
chan_tab_t *ctp;
au1x_ddma_desc_t *dp;
- /* I guess we could check this to be within the
+ /*
+ * I guess we could check this to be within the
* range of the table......
*/
- ctp = *((chan_tab_t **)chanid);
+ ctp = *(chan_tab_t **)chanid;
- /* We should have multiple callers for a particular channel,
+ /*
+ * We should have multiple callers for a particular channel,
* an interrupt doesn't affect this pointer nor the descriptor,
* so no locking should be needed.
*/
dp = ctp->put_ptr;
- /* If the descriptor is valid, we are way ahead of the DMA
+ /*
+ * If the descriptor is valid, we are way ahead of the DMA
* engine, so just return an error condition.
*/
- if (dp->dscr_cmd0 & DSCR_CMD0_V) {
+ if (dp->dscr_cmd0 & DSCR_CMD0_V)
return 0;
- }
- /* Load up buffer address and byte count.
- */
+ /* Load up buffer address and byte count. */
dp->dscr_source0 = virt_to_phys(buf);
dp->dscr_cmd1 = nbytes;
- /* Check flags */
+ /* Check flags */
if (flags & DDMA_FLAGS_IE)
dp->dscr_cmd0 |= DSCR_CMD0_IE;
if (flags & DDMA_FLAGS_NOIE)
@@ -595,23 +600,21 @@
/*
* There is an errata on the Au1200/Au1550 parts that could result
- * in "stale" data being DMA'd. It has to do with the snoop logic on
- * the dache eviction buffer. NONCOHERENT_IO is on by default for
- * these parts. If it is fixedin the future, these dma_cache_inv will
+ * in "stale" data being DMA'ed. It has to do with the snoop logic on
+ * the cache eviction buffer. DMA_NONCOHERENT is on by default for
+ * these parts. If it is fixed in the future, these dma_cache_inv will
* just be nothing more than empty macros. See io.h.
- * */
+ */
dma_cache_wback_inv((unsigned long)buf, nbytes);
- dp->dscr_cmd0 |= DSCR_CMD0_V; /* Let it rip */
+ dp->dscr_cmd0 |= DSCR_CMD0_V; /* Let it rip */
au_sync();
dma_cache_wback_inv((unsigned long)dp, sizeof(dp));
- ctp->chan_ptr->ddma_dbell = 0;
+ ctp->chan_ptr->ddma_dbell = 0;
- /* Get next descriptor pointer.
- */
+ /* Get next descriptor pointer. */
ctp->put_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
- /* return something not zero.
- */
+ /* Return something non-zero. */
return nbytes;
}
EXPORT_SYMBOL(_au1xxx_dbdma_put_source);
@@ -654,81 +657,77 @@
dp->dscr_dest0 = virt_to_phys(buf);
dp->dscr_cmd1 = nbytes;
#if 0
- printk("cmd0:%x cmd1:%x source0:%x source1:%x dest0:%x dest1:%x\n",
- dp->dscr_cmd0, dp->dscr_cmd1, dp->dscr_source0,
- dp->dscr_source1, dp->dscr_dest0, dp->dscr_dest1 );
+ printk(KERN_DEBUG "cmd0:%x cmd1:%x source0:%x source1:%x dest0:%x dest1:%x\n",
+ dp->dscr_cmd0, dp->dscr_cmd1, dp->dscr_source0,
+ dp->dscr_source1, dp->dscr_dest0, dp->dscr_dest1);
#endif
/*
* There is an errata on the Au1200/Au1550 parts that could result in
- * "stale" data being DMA'd. It has to do with the snoop logic on the
- * dache eviction buffer. NONCOHERENT_IO is on by default for these
- * parts. If it is fixedin the future, these dma_cache_inv will just
+ * "stale" data being DMA'ed. It has to do with the snoop logic on the
+ * cache eviction buffer. DMA_NONCOHERENT is on by default for these
+ * parts. If it is fixed in the future, these dma_cache_inv will just
* be nothing more than empty macros. See io.h.
- * */
+ */
dma_cache_inv((unsigned long)buf, nbytes);
dp->dscr_cmd0 |= DSCR_CMD0_V; /* Let it rip */
au_sync();
dma_cache_wback_inv((unsigned long)dp, sizeof(dp));
- ctp->chan_ptr->ddma_dbell = 0;
+ ctp->chan_ptr->ddma_dbell = 0;
- /* Get next descriptor pointer.
- */
+ /* Get next descriptor pointer. */
ctp->put_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
- /* return something not zero.
- */
+ /* Return something non-zero. */
return nbytes;
}
EXPORT_SYMBOL(_au1xxx_dbdma_put_dest);
-/* Get a destination buffer into the DMA ring.
+/*
+ * Get a destination buffer into the DMA ring.
* Normally used to get a full buffer from the ring during fifo
* to memory transfers. This does not set the valid bit, you will
* have to put another destination buffer to keep the DMA going.
*/
-u32
-au1xxx_dbdma_get_dest(u32 chanid, void **buf, int *nbytes)
+u32 au1xxx_dbdma_get_dest(u32 chanid, void **buf, int *nbytes)
{
chan_tab_t *ctp;
au1x_ddma_desc_t *dp;
u32 rv;
- /* I guess we could check this to be within the
+ /*
+ * I guess we could check this to be within the
* range of the table......
*/
ctp = *((chan_tab_t **)chanid);
- /* We should have multiple callers for a particular channel,
+ /*
+ * We should have multiple callers for a particular channel,
* an interrupt doesn't affect this pointer nor the descriptor,
* so no locking should be needed.
*/
dp = ctp->get_ptr;
- /* If the descriptor is valid, we are way ahead of the DMA
+ /*
+ * If the descriptor is valid, we are way ahead of the DMA
* engine, so just return an error condition.
*/
if (dp->dscr_cmd0 & DSCR_CMD0_V)
return 0;
- /* Return buffer address and byte count.
- */
+ /* Return buffer address and byte count. */
*buf = (void *)(phys_to_virt(dp->dscr_dest0));
*nbytes = dp->dscr_cmd1;
rv = dp->dscr_stat;
- /* Get next descriptor pointer.
- */
+ /* Get next descriptor pointer. */
ctp->get_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
- /* return something not zero.
- */
+ /* Return something non-zero. */
return rv;
}
-
EXPORT_SYMBOL_GPL(au1xxx_dbdma_get_dest);
-void
-au1xxx_dbdma_stop(u32 chanid)
+void au1xxx_dbdma_stop(u32 chanid)
{
chan_tab_t *ctp;
au1x_dma_chan_t *cp;
@@ -743,7 +742,7 @@
udelay(1);
halt_timeout++;
if (halt_timeout > 100) {
- printk("warning: DMA channel won't halt\n");
+ printk(KERN_WARNING "warning: DMA channel won't halt\n");
break;
}
}
@@ -753,12 +752,12 @@
}
EXPORT_SYMBOL(au1xxx_dbdma_stop);
-/* Start using the current descriptor pointer. If the dbdma encounters
- * a not valid descriptor, it will stop. In this case, we can just
+/*
+ * Start using the current descriptor pointer. If the DBDMA encounters
+ * a non-valid descriptor, it will stop. In this case, we can just
* continue by adding a buffer to the list and starting again.
*/
-void
-au1xxx_dbdma_start(u32 chanid)
+void au1xxx_dbdma_start(u32 chanid)
{
chan_tab_t *ctp;
au1x_dma_chan_t *cp;
@@ -773,8 +772,7 @@
}
EXPORT_SYMBOL(au1xxx_dbdma_start);
-void
-au1xxx_dbdma_reset(u32 chanid)
+void au1xxx_dbdma_reset(u32 chanid)
{
chan_tab_t *ctp;
au1x_ddma_desc_t *dp;
@@ -784,14 +782,14 @@
ctp = *((chan_tab_t **)chanid);
ctp->get_ptr = ctp->put_ptr = ctp->cur_ptr = ctp->chan_desc_base;
- /* Run through the descriptors and reset the valid indicator.
- */
+ /* Run through the descriptors and reset the valid indicator. */
dp = ctp->chan_desc_base;
do {
dp->dscr_cmd0 &= ~DSCR_CMD0_V;
- /* reset our SW status -- this is used to determine
- * if a descriptor is in use by upper level SW. Since
+ /*
+ * Reset our software status -- this is used to determine
+ * if a descriptor is in use by upper level software. Since
* posting can reset 'V' bit.
*/
dp->sw_status = 0;
@@ -800,8 +798,7 @@
}
EXPORT_SYMBOL(au1xxx_dbdma_reset);
-u32
-au1xxx_get_dma_residue(u32 chanid)
+u32 au1xxx_get_dma_residue(u32 chanid)
{
chan_tab_t *ctp;
au1x_dma_chan_t *cp;
@@ -810,18 +807,15 @@
ctp = *((chan_tab_t **)chanid);
cp = ctp->chan_ptr;
- /* This is only valid if the channel is stopped.
- */
+ /* This is only valid if the channel is stopped. */
rv = cp->ddma_bytecnt;
au_sync();
return rv;
}
-
EXPORT_SYMBOL_GPL(au1xxx_get_dma_residue);
-void
-au1xxx_dbdma_chan_free(u32 chanid)
+void au1xxx_dbdma_chan_free(u32 chanid)
{
chan_tab_t *ctp;
dbdev_tab_t *stp, *dtp;
@@ -842,8 +836,7 @@
}
EXPORT_SYMBOL(au1xxx_dbdma_chan_free);
-static irqreturn_t
-dbdma_interrupt(int irq, void *dev_id)
+static irqreturn_t dbdma_interrupt(int irq, void *dev_id)
{
u32 intstat;
u32 chan_index;
@@ -859,13 +852,12 @@
cp = ctp->chan_ptr;
dp = ctp->cur_ptr;
- /* Reset interrupt.
- */
+ /* Reset interrupt. */
cp->ddma_irq = 0;
au_sync();
if (ctp->chan_callback)
- (ctp->chan_callback)(irq, ctp->chan_callparam);
+ ctp->chan_callback(irq, ctp->chan_callparam);
ctp->cur_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
return IRQ_RETVAL(1);
@@ -890,47 +882,47 @@
if (request_irq(irq_nr, dbdma_interrupt, IRQF_DISABLED,
"Au1xxx dbdma", (void *)dbdma_gptr))
- printk("Can't get 1550 dbdma irq");
+ printk(KERN_ERR "Can't get 1550 dbdma irq");
}
-void
-au1xxx_dbdma_dump(u32 chanid)
+void au1xxx_dbdma_dump(u32 chanid)
{
- chan_tab_t *ctp;
- au1x_ddma_desc_t *dp;
- dbdev_tab_t *stp, *dtp;
- au1x_dma_chan_t *cp;
- u32 i = 0;
+ chan_tab_t *ctp;
+ au1x_ddma_desc_t *dp;
+ dbdev_tab_t *stp, *dtp;
+ au1x_dma_chan_t *cp;
+ u32 i = 0;
ctp = *((chan_tab_t **)chanid);
stp = ctp->chan_src;
dtp = ctp->chan_dest;
cp = ctp->chan_ptr;
- printk("Chan %x, stp %x (dev %d) dtp %x (dev %d) \n",
- (u32)ctp, (u32)stp, stp - dbdev_tab, (u32)dtp, dtp - dbdev_tab);
- printk("desc base %x, get %x, put %x, cur %x\n",
- (u32)(ctp->chan_desc_base), (u32)(ctp->get_ptr),
- (u32)(ctp->put_ptr), (u32)(ctp->cur_ptr));
+ printk(KERN_DEBUG "Chan %x, stp %x (dev %d) dtp %x (dev %d) \n",
+ (u32)ctp, (u32)stp, stp - dbdev_tab, (u32)dtp,
+ dtp - dbdev_tab);
+ printk(KERN_DEBUG "desc base %x, get %x, put %x, cur %x\n",
+ (u32)(ctp->chan_desc_base), (u32)(ctp->get_ptr),
+ (u32)(ctp->put_ptr), (u32)(ctp->cur_ptr));
- printk("dbdma chan %x\n", (u32)cp);
- printk("cfg %08x, desptr %08x, statptr %08x\n",
- cp->ddma_cfg, cp->ddma_desptr, cp->ddma_statptr);
- printk("dbell %08x, irq %08x, stat %08x, bytecnt %08x\n",
- cp->ddma_dbell, cp->ddma_irq, cp->ddma_stat, cp->ddma_bytecnt);
+ printk(KERN_DEBUG "dbdma chan %x\n", (u32)cp);
+ printk(KERN_DEBUG "cfg %08x, desptr %08x, statptr %08x\n",
+ cp->ddma_cfg, cp->ddma_desptr, cp->ddma_statptr);
+ printk(KERN_DEBUG "dbell %08x, irq %08x, stat %08x, bytecnt %08x\n",
+ cp->ddma_dbell, cp->ddma_irq, cp->ddma_stat,
+ cp->ddma_bytecnt);
-
- /* Run through the descriptors
- */
+ /* Run through the descriptors */
dp = ctp->chan_desc_base;
do {
- printk("Dp[%d]= %08x, cmd0 %08x, cmd1 %08x\n",
- i++, (u32)dp, dp->dscr_cmd0, dp->dscr_cmd1);
- printk("src0 %08x, src1 %08x, dest0 %08x, dest1 %08x\n",
- dp->dscr_source0, dp->dscr_source1, dp->dscr_dest0, dp->dscr_dest1);
- printk("stat %08x, nxtptr %08x\n",
- dp->dscr_stat, dp->dscr_nxtptr);
+ printk(KERN_DEBUG "Dp[%d]= %08x, cmd0 %08x, cmd1 %08x\n",
+ i++, (u32)dp, dp->dscr_cmd0, dp->dscr_cmd1);
+ printk(KERN_DEBUG "src0 %08x, src1 %08x, dest0 %08x, dest1 %08x\n",
+ dp->dscr_source0, dp->dscr_source1,
+ dp->dscr_dest0, dp->dscr_dest1);
+ printk(KERN_DEBUG "stat %08x, nxtptr %08x\n",
+ dp->dscr_stat, dp->dscr_nxtptr);
dp = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
} while (dp != ctp->chan_desc_base);
}
@@ -938,32 +930,33 @@
/* Put a descriptor into the DMA ring.
* This updates the source/destination pointers and byte count.
*/
-u32
-au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr )
+u32 au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr)
{
chan_tab_t *ctp;
au1x_ddma_desc_t *dp;
- u32 nbytes=0;
+ u32 nbytes = 0;
- /* I guess we could check this to be within the
- * range of the table......
- */
+ /*
+ * I guess we could check this to be within the
+ * range of the table......
+ */
ctp = *((chan_tab_t **)chanid);
- /* We should have multiple callers for a particular channel,
- * an interrupt doesn't affect this pointer nor the descriptor,
- * so no locking should be needed.
- */
+ /*
+ * We should have multiple callers for a particular channel,
+ * an interrupt doesn't affect this pointer nor the descriptor,
+ * so no locking should be needed.
+ */
dp = ctp->put_ptr;
- /* If the descriptor is valid, we are way ahead of the DMA
- * engine, so just return an error condition.
- */
+ /*
+ * If the descriptor is valid, we are way ahead of the DMA
+ * engine, so just return an error condition.
+ */
if (dp->dscr_cmd0 & DSCR_CMD0_V)
return 0;
- /* Load up buffer addresses and byte count.
- */
+ /* Load up buffer addresses and byte count. */
dp->dscr_dest0 = dscr->dscr_dest0;
dp->dscr_source0 = dscr->dscr_source0;
dp->dscr_dest1 = dscr->dscr_dest1;
@@ -975,14 +968,11 @@
dp->dscr_cmd0 |= dscr->dscr_cmd0 | DSCR_CMD0_V;
ctp->chan_ptr->ddma_dbell = 0;
- /* Get next descriptor pointer.
- */
+ /* Get next descriptor pointer. */
ctp->put_ptr = phys_to_virt(DSCR_GET_NXTPTR(dp->dscr_nxtptr));
- /* return something not zero.
- */
+ /* Return something non-zero. */
return nbytes;
}
#endif /* defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200) */
-
diff --git a/arch/mips/au1000/common/dbg_io.c b/arch/mips/au1000/common/dbg_io.c
index eae1bb2..af5be7d 100644
--- a/arch/mips/au1000/common/dbg_io.c
+++ b/arch/mips/au1000/common/dbg_io.c
@@ -1,3 +1,4 @@
+#include <linux/types.h>
#include <asm/mach-au1x00/au1000.h>
@@ -8,12 +9,6 @@
* uart to be used for debugging.
*/
#define DEBUG_BASE UART_DEBUG_BASE
-/**/
-
-/* we need uint32 uint8 */
-/* #include "types.h" */
-typedef unsigned char uint8;
-typedef unsigned int uint32;
#define UART16550_BAUD_2400 2400
#define UART16550_BAUD_4800 4800
@@ -51,17 +46,15 @@
#define UART_MOD_CNTRL 0x100 /* Module Control */
/* memory-mapped read/write of the port */
-#define UART16550_READ(y) (au_readl(DEBUG_BASE + y) & 0xff)
-#define UART16550_WRITE(y, z) (au_writel(z&0xff, DEBUG_BASE + y))
+#define UART16550_READ(y) (au_readl(DEBUG_BASE + y) & 0xff)
+#define UART16550_WRITE(y, z) (au_writel(z & 0xff, DEBUG_BASE + y))
extern unsigned long calc_clock(void);
-void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
+void debugInit(u32 baud, u8 data, u8 parity, u8 stop)
{
-
- if (UART16550_READ(UART_MOD_CNTRL) != 0x3) {
+ if (UART16550_READ(UART_MOD_CNTRL) != 0x3)
UART16550_WRITE(UART_MOD_CNTRL, 3);
- }
calc_clock();
/* disable interrupts */
@@ -69,7 +62,7 @@
/* set up baud rate */
{
- uint32 divisor;
+ u32 divisor;
/* set divisor */
divisor = get_au1x00_uart_baud_base() / baud;
@@ -80,9 +73,9 @@
UART16550_WRITE(UART_LCR, (data | parity | stop));
}
-static int remoteDebugInitialized = 0;
+static int remoteDebugInitialized;
-uint8 getDebugChar(void)
+u8 getDebugChar(void)
{
if (!remoteDebugInitialized) {
remoteDebugInitialized = 1;
@@ -92,15 +85,13 @@
UART16550_STOP_1BIT);
}
- while((UART16550_READ(UART_LSR) & 0x1) == 0);
+ while ((UART16550_READ(UART_LSR) & 0x1) == 0);
return UART16550_READ(UART_RX);
}
-int putDebugChar(uint8 byte)
+int putDebugChar(u8 byte)
{
-// int i;
-
if (!remoteDebugInitialized) {
remoteDebugInitialized = 1;
debugInit(UART16550_BAUD_115200,
@@ -109,9 +100,8 @@
UART16550_STOP_1BIT);
}
- while ((UART16550_READ(UART_LSR)&0x40) == 0);
+ while ((UART16550_READ(UART_LSR) & 0x40) == 0);
UART16550_WRITE(UART_TX, byte);
- //for (i=0;i<0xfff;i++);
return 1;
}
diff --git a/arch/mips/au1000/common/dma.c b/arch/mips/au1000/common/dma.c
index 95f69ea..d6fbda2 100644
--- a/arch/mips/au1000/common/dma.c
+++ b/arch/mips/au1000/common/dma.c
@@ -1,12 +1,11 @@
/*
*
* BRIEF MODULE DESCRIPTION
- * A DMA channel allocator for Au1000. API is modeled loosely off of
+ * A DMA channel allocator for Au1x00. API is modeled loosely off of
* linux/kernel/dma.c.
*
- * Copyright 2000 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * stevel@mvista.com or source@mvista.com
+ * Copyright 2000, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
* Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org)
*
* This program is free software; you can redistribute it and/or modify it
@@ -39,7 +38,8 @@
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-au1x00/au1000_dma.h>
-#if defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1100)
+#if defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1500) || \
+ defined(CONFIG_SOC_AU1100)
/*
* A note on resource allocation:
*
@@ -56,7 +56,6 @@
* returned from request_dma.
*/
-
DEFINE_SPINLOCK(au1000_dma_spin_lock);
struct dma_chan au1000_dma_table[NUM_AU1000_DMA_CHANNELS] = {
@@ -71,7 +70,7 @@
};
EXPORT_SYMBOL(au1000_dma_table);
-// Device FIFO addresses and default DMA modes
+/* Device FIFO addresses and default DMA modes */
static const struct dma_dev {
unsigned int fifo_addr;
unsigned int dma_mode;
@@ -80,8 +79,8 @@
{UART0_ADDR + UART_RX, 0},
{0, 0},
{0, 0},
- {AC97C_DATA, DMA_DW16 }, // coherent
- {AC97C_DATA, DMA_DR | DMA_DW16 }, // coherent
+ {AC97C_DATA, DMA_DW16 }, /* coherent */
+ {AC97C_DATA, DMA_DR | DMA_DW16 }, /* coherent */
{UART3_ADDR + UART_TX, DMA_DW8 | DMA_NC},
{UART3_ADDR + UART_RX, DMA_DR | DMA_DW8 | DMA_NC},
{USBD_EP0RD, DMA_DR | DMA_DW8 | DMA_NC},
@@ -101,10 +100,10 @@
struct dma_chan *chan;
for (i = 0; i < NUM_AU1000_DMA_CHANNELS; i++) {
- if ((chan = get_dma_chan(i)) != NULL) {
+ chan = get_dma_chan(i);
+ if (chan != NULL)
len += sprintf(buf + len, "%2d: %s\n",
i, chan->dev_str);
- }
}
if (fpos >= len) {
@@ -113,18 +112,19 @@
return 0;
}
*start = buf + fpos;
- if ((len -= fpos) > length)
+ len -= fpos;
+ if (len > length)
return length;
*eof = 1;
return len;
}
-// Device FIFO addresses and default DMA modes - 2nd bank
+/* Device FIFO addresses and default DMA modes - 2nd bank */
static const struct dma_dev dma_dev_table_bank2[DMA_NUM_DEV_BANK2] = {
- {SD0_XMIT_FIFO, DMA_DS | DMA_DW8}, // coherent
- {SD0_RECV_FIFO, DMA_DS | DMA_DR | DMA_DW8}, // coherent
- {SD1_XMIT_FIFO, DMA_DS | DMA_DW8}, // coherent
- {SD1_RECV_FIFO, DMA_DS | DMA_DR | DMA_DW8} // coherent
+ { SD0_XMIT_FIFO, DMA_DS | DMA_DW8 }, /* coherent */
+ { SD0_RECV_FIFO, DMA_DS | DMA_DR | DMA_DW8 }, /* coherent */
+ { SD1_XMIT_FIFO, DMA_DS | DMA_DW8 }, /* coherent */
+ { SD1_RECV_FIFO, DMA_DS | DMA_DR | DMA_DW8 } /* coherent */
};
void dump_au1000_dma_channel(unsigned int dmanr)
@@ -150,7 +150,6 @@
au_readl(chan->io + DMA_BUFFER1_COUNT));
}
-
/*
* Finds a free channel, and binds the requested device to it.
* Returns the allocated channel number, or negative on error.
@@ -169,14 +168,14 @@
if (dev_id < 0 || dev_id >= (DMA_NUM_DEV + DMA_NUM_DEV_BANK2))
return -EINVAL;
#else
- if (dev_id < 0 || dev_id >= DMA_NUM_DEV)
+ if (dev_id < 0 || dev_id >= DMA_NUM_DEV)
return -EINVAL;
#endif
- for (i = 0; i < NUM_AU1000_DMA_CHANNELS; i++) {
+ for (i = 0; i < NUM_AU1000_DMA_CHANNELS; i++)
if (au1000_dma_table[i].dev_id < 0)
break;
- }
+
if (i == NUM_AU1000_DMA_CHANNELS)
return -ENODEV;
@@ -185,15 +184,15 @@
if (dev_id >= DMA_NUM_DEV) {
dev_id -= DMA_NUM_DEV;
dev = &dma_dev_table_bank2[dev_id];
- } else {
+ } else
dev = &dma_dev_table[dev_id];
- }
if (irqhandler) {
chan->irq = AU1000_DMA_INT_BASE + i;
chan->irq_dev = irq_dev_id;
- if ((ret = request_irq(chan->irq, irqhandler, irqflags,
- dev_str, chan->irq_dev))) {
+ ret = request_irq(chan->irq, irqhandler, irqflags, dev_str,
+ chan->irq_dev);
+ if (ret) {
chan->irq = 0;
chan->irq_dev = NULL;
return ret;
@@ -203,7 +202,7 @@
chan->irq_dev = NULL;
}
- // fill it in
+ /* fill it in */
chan->io = DMA_CHANNEL_BASE + i * DMA_CHANNEL_LEN;
chan->dev_id = dev_id;
chan->dev_str = dev_str;
@@ -220,8 +219,9 @@
void free_au1000_dma(unsigned int dmanr)
{
struct dma_chan *chan = get_dma_chan(dmanr);
+
if (!chan) {
- printk("Trying to free DMA%d\n", dmanr);
+ printk(KERN_ERR "Error trying to free DMA%d\n", dmanr);
return;
}
@@ -235,4 +235,4 @@
}
EXPORT_SYMBOL(free_au1000_dma);
-#endif // AU1000 AU1500 AU1100
+#endif /* AU1000 AU1500 AU1100 */
diff --git a/arch/mips/au1000/common/gpio.c b/arch/mips/au1000/common/gpio.c
index 5254525..b485d94 100644
--- a/arch/mips/au1000/common/gpio.c
+++ b/arch/mips/au1000/common/gpio.c
@@ -69,7 +69,7 @@
static int au1xxx_gpio1_read(unsigned gpio)
{
- return ((gpio1->pinstaterd >> gpio) & 0x01);
+ return (gpio1->pinstaterd >> gpio) & 0x01;
}
static void au1xxx_gpio1_write(unsigned gpio, int value)
@@ -104,7 +104,6 @@
else
return au1xxx_gpio1_read(gpio);
}
-
EXPORT_SYMBOL(au1xxx_gpio_get_value);
void au1xxx_gpio_set_value(unsigned gpio, int value)
@@ -118,7 +117,6 @@
else
au1xxx_gpio1_write(gpio, value);
}
-
EXPORT_SYMBOL(au1xxx_gpio_set_value);
int au1xxx_gpio_direction_input(unsigned gpio)
@@ -132,7 +130,6 @@
return au1xxx_gpio1_direction_input(gpio);
}
-
EXPORT_SYMBOL(au1xxx_gpio_direction_input);
int au1xxx_gpio_direction_output(unsigned gpio, int value)
@@ -146,5 +143,4 @@
return au1xxx_gpio1_direction_output(gpio, value);
}
-
EXPORT_SYMBOL(au1xxx_gpio_direction_output);
diff --git a/arch/mips/au1000/common/irq.c b/arch/mips/au1000/common/irq.c
index f062699..40c6cec 100644
--- a/arch/mips/au1000/common/irq.c
+++ b/arch/mips/au1000/common/irq.c
@@ -210,10 +210,8 @@
au_sync();
}
-
static inline void mask_and_ack_level_irq(unsigned int irq_nr)
{
-
local_disable_irq(irq_nr);
au_sync();
#if defined(CONFIG_MIPS_PB1000)
@@ -263,14 +261,14 @@
unsigned long flags, new_mask;
spin_lock_irqsave(&irq_lock, flags);
- for (i = 0; i < 32; i++) {
+ for (i = 0; i < 32; i++)
if (mask & (1 << i)) {
if (controller)
local_enable_irq(i + 32);
else
local_enable_irq(i);
}
- }
+
if (controller)
new_mask = au_readl(IC1_MASKSET);
else
diff --git a/arch/mips/au1000/common/pci.c b/arch/mips/au1000/common/pci.c
index 7e966b3..7866cf5 100644
--- a/arch/mips/au1000/common/pci.c
+++ b/arch/mips/au1000/common/pci.c
@@ -2,9 +2,8 @@
* BRIEF MODULE DESCRIPTION
* Alchemy/AMD Au1x00 PCI support.
*
- * Copyright 2001-2003, 2007 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2001-2003, 2007-2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org)
*
@@ -86,9 +85,9 @@
u32 prid = read_c0_prid();
if ((prid & 0xFF000000) == 0x01000000 && prid < 0x01030202) {
- au_writel((1 << 16) | au_readl(Au1500_PCI_CFG),
- Au1500_PCI_CFG);
- printk("Non-coherent PCI accesses enabled\n");
+ au_writel((1 << 16) | au_readl(Au1500_PCI_CFG),
+ Au1500_PCI_CFG);
+ printk(KERN_INFO "Non-coherent PCI accesses enabled\n");
}
}
#endif
diff --git a/arch/mips/au1000/common/platform.c b/arch/mips/au1000/common/platform.c
index 31d2a22..8cae7753 100644
--- a/arch/mips/au1000/common/platform.c
+++ b/arch/mips/au1000/common/platform.c
@@ -269,8 +269,8 @@
#ifdef SMBUS_PSC_BASE
static struct resource pbdb_smbus_resources[] = {
{
- .start = SMBUS_PSC_BASE,
- .end = SMBUS_PSC_BASE + 0x24 - 1,
+ .start = CPHYSADDR(SMBUS_PSC_BASE),
+ .end = CPHYSADDR(SMBUS_PSC_BASE + 0xfffff),
.flags = IORESOURCE_MEM,
},
};
@@ -302,16 +302,17 @@
#endif
};
-int __init au1xxx_platform_init(void)
+static int __init au1xxx_platform_init(void)
{
unsigned int uartclk = get_au1x00_uart_baud_base() * 16;
int i;
/* Fill up uartclk. */
- for (i = 0; au1x00_uart_data[i].flags ; i++)
+ for (i = 0; au1x00_uart_data[i].flags; i++)
au1x00_uart_data[i].uartclk = uartclk;
- return platform_add_devices(au1xxx_platform_devices, ARRAY_SIZE(au1xxx_platform_devices));
+ return platform_add_devices(au1xxx_platform_devices,
+ ARRAY_SIZE(au1xxx_platform_devices));
}
arch_initcall(au1xxx_platform_init);
diff --git a/arch/mips/au1000/common/power.c b/arch/mips/au1000/common/power.c
index a8cd2c1..2166b9e 100644
--- a/arch/mips/au1000/common/power.c
+++ b/arch/mips/au1000/common/power.c
@@ -1,10 +1,9 @@
/*
* BRIEF MODULE DESCRIPTION
- * Au1000 Power Management routines.
+ * Au1xx0 Power Management routines.
*
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2001, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* Some of the routines are right out of init/main.c, whose
* copyrights apply here.
@@ -43,10 +42,10 @@
#ifdef CONFIG_PM
#define DEBUG 1
-#ifdef DEBUG
-# define DPRINTK(fmt, args...) printk("%s: " fmt, __func__, ## args)
+#ifdef DEBUG
+#define DPRINTK(fmt, args...) printk(KERN_DEBUG "%s: " fmt, __func__, ## args)
#else
-# define DPRINTK(fmt, args...)
+#define DPRINTK(fmt, args...)
#endif
static void au1000_calibrate_delay(void);
@@ -57,7 +56,8 @@
static DEFINE_SPINLOCK(pm_lock);
-/* We need to save/restore a bunch of core registers that are
+/*
+ * We need to save/restore a bunch of core registers that are
* either volatile or reset to some state across a processor sleep.
* If reading a register doesn't provide a proper result for a
* later restore, we have to provide a function for loading that
@@ -78,24 +78,25 @@
static unsigned int sleep_usbdev_enable;
static unsigned int sleep_static_memctlr[4][3];
-/* Define this to cause the value you write to /proc/sys/pm/sleep to
+/*
+ * Define this to cause the value you write to /proc/sys/pm/sleep to
* set the TOY timer for the amount of time you want to sleep.
* This is done mainly for testing, but may be useful in other cases.
* The value is number of 32KHz ticks to sleep.
*/
#define SLEEP_TEST_TIMEOUT 1
-#ifdef SLEEP_TEST_TIMEOUT
-static int sleep_ticks;
+#ifdef SLEEP_TEST_TIMEOUT
+static int sleep_ticks;
void wakeup_counter0_set(int ticks);
#endif
-static void
-save_core_regs(void)
+static void save_core_regs(void)
{
extern void save_au1xxx_intctl(void);
extern void pm_eth0_shutdown(void);
- /* Do the serial ports.....these really should be a pm_*
+ /*
+ * Do the serial ports.....these really should be a pm_*
* registered function by the driver......but of course the
* standard serial driver doesn't understand our Au1xxx
* unique registers.
@@ -106,27 +107,24 @@
sleep_uart0_clkdiv = au_readl(UART0_ADDR + UART_CLK);
sleep_uart0_enable = au_readl(UART0_ADDR + UART_MOD_CNTRL);
- /* Shutdown USB host/device.
- */
+ /* Shutdown USB host/device. */
sleep_usbhost_enable = au_readl(USB_HOST_CONFIG);
- /* There appears to be some undocumented reset register....
- */
+ /* There appears to be some undocumented reset register.... */
au_writel(0, 0xb0100004); au_sync();
au_writel(0, USB_HOST_CONFIG); au_sync();
sleep_usbdev_enable = au_readl(USBD_ENABLE);
au_writel(0, USBD_ENABLE); au_sync();
- /* Save interrupt controller state.
- */
+ /* Save interrupt controller state. */
save_au1xxx_intctl();
- /* Clocks and PLLs.
- */
+ /* Clocks and PLLs. */
sleep_aux_pll_cntrl = au_readl(SYS_AUXPLL);
- /* We don't really need to do this one, but unless we
+ /*
+ * We don't really need to do this one, but unless we
* write it again it won't have a valid value if we
* happen to read it.
*/
@@ -134,8 +132,7 @@
sleep_pin_function = au_readl(SYS_PINFUNC);
- /* Save the static memory controller configuration.
- */
+ /* Save the static memory controller configuration. */
sleep_static_memctlr[0][0] = au_readl(MEM_STCFG0);
sleep_static_memctlr[0][1] = au_readl(MEM_STTIME0);
sleep_static_memctlr[0][2] = au_readl(MEM_STADDR0);
@@ -150,8 +147,7 @@
sleep_static_memctlr[3][2] = au_readl(MEM_STADDR3);
}
-static void
-restore_core_regs(void)
+static void restore_core_regs(void)
{
extern void restore_au1xxx_intctl(void);
extern void wakeup_counter0_adjust(void);
@@ -160,8 +156,7 @@
au_writel(sleep_cpu_pll_cntrl, SYS_CPUPLL); au_sync();
au_writel(sleep_pin_function, SYS_PINFUNC); au_sync();
- /* Restore the static memory controller configuration.
- */
+ /* Restore the static memory controller configuration. */
au_writel(sleep_static_memctlr[0][0], MEM_STCFG0);
au_writel(sleep_static_memctlr[0][1], MEM_STTIME0);
au_writel(sleep_static_memctlr[0][2], MEM_STADDR0);
@@ -175,7 +170,8 @@
au_writel(sleep_static_memctlr[3][1], MEM_STTIME3);
au_writel(sleep_static_memctlr[3][2], MEM_STADDR3);
- /* Enable the UART if it was enabled before sleep.
+ /*
+ * Enable the UART if it was enabled before sleep.
* I guess I should define module control bits........
*/
if (sleep_uart0_enable & 0x02) {
@@ -202,7 +198,7 @@
int au_sleep(void)
{
unsigned long wakeup, flags;
- extern void save_and_sleep(void);
+ extern void save_and_sleep(void);
spin_lock_irqsave(&pm_lock, flags);
@@ -210,23 +206,22 @@
flush_cache_all();
- /** The code below is all system dependent and we should probably
+ /**
+ ** The code below is all system dependent and we should probably
** have a function call out of here to set this up. You need
** to configure the GPIO or timer interrupts that will bring
** you out of sleep.
** For testing, the TOY counter wakeup is useful.
**/
-
#if 0
au_writel(au_readl(SYS_PINSTATERD) & ~(1 << 11), SYS_PINSTATERD);
- /* gpio 6 can cause a wake up event */
+ /* GPIO 6 can cause a wake up event */
wakeup = au_readl(SYS_WAKEMSK);
wakeup &= ~(1 << 8); /* turn off match20 wakeup */
- wakeup |= 1 << 6; /* turn on gpio 6 wakeup */
+ wakeup |= 1 << 6; /* turn on GPIO 6 wakeup */
#else
- /* For testing, allow match20 to wake us up.
- */
+ /* For testing, allow match20 to wake us up. */
#ifdef SLEEP_TEST_TIMEOUT
wakeup_counter0_set(sleep_ticks);
#endif
@@ -240,7 +235,8 @@
save_and_sleep();
- /* after a wakeup, the cpu vectors back to 0x1fc00000 so
+ /*
+ * After a wakeup, the cpu vectors back to 0x1fc00000, so
* it's up to the boot code to get us back here.
*/
restore_core_regs();
@@ -248,24 +244,22 @@
return 0;
}
-static int pm_do_sleep(ctl_table * ctl, int write, struct file *file,
- void __user *buffer, size_t * len, loff_t *ppos)
+static int pm_do_sleep(ctl_table *ctl, int write, struct file *file,
+ void __user *buffer, size_t *len, loff_t *ppos)
{
#ifdef SLEEP_TEST_TIMEOUT
#define TMPBUFLEN2 16
char buf[TMPBUFLEN2], *p;
#endif
- if (!write) {
+ if (!write)
*len = 0;
- } else {
+ else {
#ifdef SLEEP_TEST_TIMEOUT
- if (*len > TMPBUFLEN2 - 1) {
+ if (*len > TMPBUFLEN2 - 1)
return -EFAULT;
- }
- if (copy_from_user(buf, buffer, *len)) {
+ if (copy_from_user(buf, buffer, *len))
return -EFAULT;
- }
buf[*len] = 0;
p = buf;
sleep_ticks = simple_strtoul(p, &p, 0);
@@ -276,8 +270,8 @@
return 0;
}
-static int pm_do_freq(ctl_table * ctl, int write, struct file *file,
- void __user *buffer, size_t * len, loff_t *ppos)
+static int pm_do_freq(ctl_table *ctl, int write, struct file *file,
+ void __user *buffer, size_t *len, loff_t *ppos)
{
int retval = 0, i;
unsigned long val, pll;
@@ -285,14 +279,14 @@
#define MAX_CPU_FREQ 396
char buf[TMPBUFLEN], *p;
unsigned long flags, intc0_mask, intc1_mask;
- unsigned long old_baud_base, old_cpu_freq, baud_rate, old_clk,
- old_refresh;
+ unsigned long old_baud_base, old_cpu_freq, old_clk, old_refresh;
unsigned long new_baud_base, new_cpu_freq, new_clk, new_refresh;
+ unsigned long baud_rate;
spin_lock_irqsave(&pm_lock, flags);
- if (!write) {
+ if (!write)
*len = 0;
- } else {
+ else {
/* Parse the new frequency */
if (*len > TMPBUFLEN - 1) {
spin_unlock_irqrestore(&pm_lock, flags);
@@ -312,7 +306,7 @@
pll = val / 12;
if ((pll > 33) || (pll < 7)) { /* 396 MHz max, 84 MHz min */
- /* revisit this for higher speed cpus */
+ /* Revisit this for higher speed CPUs */
spin_unlock_irqrestore(&pm_lock, flags);
return -EFAULT;
}
@@ -321,30 +315,28 @@
old_cpu_freq = get_au1x00_speed();
new_cpu_freq = pll * 12 * 1000000;
- new_baud_base = (new_cpu_freq / (2 * ((int)(au_readl(SYS_POWERCTRL)&0x03) + 2) * 16));
+ new_baud_base = (new_cpu_freq / (2 * ((int)(au_readl(SYS_POWERCTRL)
+ & 0x03) + 2) * 16));
set_au1x00_speed(new_cpu_freq);
set_au1x00_uart_baud_base(new_baud_base);
old_refresh = au_readl(MEM_SDREFCFG) & 0x1ffffff;
- new_refresh =
- ((old_refresh * new_cpu_freq) /
- old_cpu_freq) | (au_readl(MEM_SDREFCFG) & ~0x1ffffff);
+ new_refresh = ((old_refresh * new_cpu_freq) / old_cpu_freq) |
+ (au_readl(MEM_SDREFCFG) & ~0x1ffffff);
au_writel(pll, SYS_CPUPLL);
au_sync_delay(1);
au_writel(new_refresh, MEM_SDREFCFG);
au_sync_delay(1);
- for (i = 0; i < 4; i++) {
- if (au_readl
- (UART_BASE + UART_MOD_CNTRL +
- i * 0x00100000) == 3) {
- old_clk =
- au_readl(UART_BASE + UART_CLK +
- i * 0x00100000);
- // baud_rate = baud_base/clk
+ for (i = 0; i < 4; i++)
+ if (au_readl(UART_BASE + UART_MOD_CNTRL +
+ i * 0x00100000) == 3) {
+ old_clk = au_readl(UART_BASE + UART_CLK +
+ i * 0x00100000);
baud_rate = old_baud_base / old_clk;
- /* we won't get an exact baud rate and the error
+ /*
+ * We won't get an exact baud rate and the error
* could be significant enough that our new
* calculation will result in a clock that will
* give us a baud rate that's too far off from
@@ -359,18 +351,14 @@
else if (baud_rate > 17000)
baud_rate = 19200;
else
- (baud_rate = 9600);
- // new_clk = new_baud_base/baud_rate
+ baud_rate = 9600;
new_clk = new_baud_base / baud_rate;
- au_writel(new_clk,
- UART_BASE + UART_CLK +
- i * 0x00100000);
+ au_writel(new_clk, UART_BASE + UART_CLK +
+ i * 0x00100000);
au_sync_delay(10);
}
- }
}
-
/*
* We don't want _any_ interrupts other than match20. Otherwise our
* au1000_calibrate_delay() calculation will be off, potentially a lot.
@@ -428,14 +416,15 @@
__initcall(pm_init);
-
/*
* This is right out of init/main.c
*/
-/* This is the number of bits of precision for the loops_per_jiffy. Each
- bit takes on average 1.5/HZ seconds. This (like the original) is a little
- better than 1% */
+/*
+ * This is the number of bits of precision for the loops_per_jiffy.
+ * Each bit takes on average 1.5/HZ seconds. This (like the original)
+ * is a little better than 1%.
+ */
#define LPS_PREC 8
static void au1000_calibrate_delay(void)
@@ -443,14 +432,14 @@
unsigned long ticks, loopbit;
int lps_precision = LPS_PREC;
- loops_per_jiffy = (1 << 12);
+ loops_per_jiffy = 1 << 12;
while (loops_per_jiffy <<= 1) {
- /* wait for "start of" clock tick */
+ /* Wait for "start of" clock tick */
ticks = jiffies;
while (ticks == jiffies)
/* nothing */ ;
- /* Go .. */
+ /* Go ... */
ticks = jiffies;
__delay(loops_per_jiffy);
ticks = jiffies - ticks;
@@ -458,8 +447,10 @@
break;
}
-/* Do a binary approximation to get loops_per_jiffy set to equal one clock
- (up to lps_precision bits) */
+ /*
+ * Do a binary approximation to get loops_per_jiffy set to be equal
+ * one clock (up to lps_precision bits)
+ */
loops_per_jiffy >>= 1;
loopbit = loops_per_jiffy;
while (lps_precision-- && (loopbit >>= 1)) {
@@ -472,4 +463,4 @@
loops_per_jiffy &= ~loopbit;
}
}
-#endif /* CONFIG_PM */
+#endif /* CONFIG_PM */
diff --git a/arch/mips/au1000/common/prom.c b/arch/mips/au1000/common/prom.c
index f10af82..18b310b 100644
--- a/arch/mips/au1000/common/prom.c
+++ b/arch/mips/au1000/common/prom.c
@@ -3,9 +3,8 @@
* BRIEF MODULE DESCRIPTION
* PROM library initialisation code, supports YAMON and U-Boot.
*
- * Copyright 2000, 2001, 2006 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2000-2001, 2006, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* This file was derived from Carsten Langgaard's
* arch/mips/mips-boards/xx files.
@@ -57,7 +56,7 @@
actr = 1; /* Always ignore argv[0] */
cp = &(arcs_cmdline[0]);
- while(actr < prom_argc) {
+ while (actr < prom_argc) {
strcpy(cp, prom_argv[actr]);
cp += strlen(prom_argv[actr]);
*cp++ = ' ';
@@ -84,10 +83,8 @@
if (yamon) {
if (strcmp(envname, *env++) == 0)
return *env;
- } else {
- if (strncmp(envname, *env, i) == 0 && (*env)[i] == '=')
- return *env + i + 1;
- }
+ } else if (strncmp(envname, *env, i) == 0 && (*env)[i] == '=')
+ return *env + i + 1;
env++;
}
@@ -110,13 +107,13 @@
{
int i;
- for(i = 0; i < 6; i++) {
+ for (i = 0; i < 6; i++) {
unsigned char num;
- if((*str == '.') || (*str == ':'))
+ if ((*str == '.') || (*str == ':'))
str++;
- num = str2hexnum(*str++) << 4;
- num |= (str2hexnum(*str++));
+ num = str2hexnum(*str++) << 4;
+ num |= str2hexnum(*str++);
ea[i] = num;
}
}
diff --git a/arch/mips/au1000/common/puts.c b/arch/mips/au1000/common/puts.c
index e34c67e..55bbe24 100644
--- a/arch/mips/au1000/common/puts.c
+++ b/arch/mips/au1000/common/puts.c
@@ -1,11 +1,10 @@
/*
*
* BRIEF MODULE DESCRIPTION
- * Low level uart routines to directly access a 16550 uart.
+ * Low level UART routines to directly access Alchemy UART.
*
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2001, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -40,12 +39,12 @@
static volatile unsigned long * const com1 = (unsigned long *)SERIAL_BASE;
-
#ifdef SLOW_DOWN
static inline void slow_down(void)
{
- int k;
- for (k=0; k<10000; k++);
+ int k;
+
+ for (k = 0; k < 10000; k++);
}
#else
#define slow_down()
@@ -54,16 +53,16 @@
void
prom_putchar(const unsigned char c)
{
- unsigned char ch;
- int i = 0;
+ unsigned char ch;
+ int i = 0;
- do {
- ch = com1[SER_CMD];
- slow_down();
- i++;
- if (i>TIMEOUT) {
- break;
- }
- } while (0 == (ch & TX_BUSY));
- com1[SER_DATA] = c;
+ do {
+ ch = com1[SER_CMD];
+ slow_down();
+ i++;
+ if (i > TIMEOUT)
+ break;
+ } while (0 == (ch & TX_BUSY));
+
+ com1[SER_DATA] = c;
}
diff --git a/arch/mips/au1000/common/reset.c b/arch/mips/au1000/common/reset.c
index 60cec53..d555429 100644
--- a/arch/mips/au1000/common/reset.c
+++ b/arch/mips/au1000/common/reset.c
@@ -1,11 +1,10 @@
/*
*
* BRIEF MODULE DESCRIPTION
- * Au1000 reset routines.
+ * Au1xx0 reset routines.
*
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2001, 2006, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -28,10 +27,11 @@
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#include <asm/cacheflush.h>
+
#include <asm/mach-au1x00/au1000.h>
extern int au_sleep(void);
-extern void (*flush_cache_all)(void);
void au1000_restart(char *command)
{
@@ -40,8 +40,8 @@
u32 prid = read_c0_prid();
printk(KERN_NOTICE "\n** Resetting Integrated Peripherals\n");
- switch (prid & 0xFF000000)
- {
+
+ switch (prid & 0xFF000000) {
case 0x00000000: /* Au1000 */
au_writel(0x02, 0xb0000010); /* ac97_enable */
au_writel(0x08, 0xb017fffc); /* usbh_enable - early errata */
@@ -138,9 +138,6 @@
au_writel(0x00, 0xb1900064); /* sys_auxpll */
au_writel(0x00, 0xb1900100); /* sys_pininputen */
break;
-
- default:
- break;
}
set_c0_status(ST0_BEV | ST0_ERL);
@@ -158,25 +155,25 @@
void au1000_halt(void)
{
#if defined(CONFIG_MIPS_PB1550) || defined(CONFIG_MIPS_DB1550)
- /* power off system */
- printk("\n** Powering off...\n");
- au_writew(au_readw(0xAF00001C) | (3<<14), 0xAF00001C);
+ /* Power off system */
+ printk(KERN_NOTICE "\n** Powering off...\n");
+ au_writew(au_readw(0xAF00001C) | (3 << 14), 0xAF00001C);
au_sync();
- while(1); /* should not get here */
+ while (1); /* should not get here */
#else
printk(KERN_NOTICE "\n** You can safely turn off the power\n");
#ifdef CONFIG_MIPS_MIRAGE
au_writel((1 << 26) | (1 << 10), GPIO2_OUTPUT);
#endif
#ifdef CONFIG_MIPS_DB1200
- au_writew(au_readw(0xB980001C) | (1<<14), 0xB980001C);
+ au_writew(au_readw(0xB980001C) | (1 << 14), 0xB980001C);
#endif
#ifdef CONFIG_PM
au_sleep();
- /* should not get here */
- printk(KERN_ERR "Unable to put cpu in sleep mode\n");
- while(1);
+ /* Should not get here */
+ printk(KERN_ERR "Unable to put CPU in sleep mode\n");
+ while (1);
#else
while (1)
__asm__(".set\tmips3\n\t"
diff --git a/arch/mips/au1000/common/setup.c b/arch/mips/au1000/common/setup.c
index 0e86f7a..1ac6b06 100644
--- a/arch/mips/au1000/common/setup.c
+++ b/arch/mips/au1000/common/setup.c
@@ -1,7 +1,6 @@
/*
- * Copyright 2000 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2000, 2007-2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com
*
* Updates to 2.6, Pete Popov, Embedded Alley Solutions, Inc.
*
@@ -48,7 +47,7 @@
{
struct cpu_spec *sp;
char *argptr;
- unsigned long prid, cpufreq, bclk = 1;
+ unsigned long prid, cpufreq, bclk;
set_cpuspec();
sp = cur_cpu_spec[0];
@@ -66,42 +65,39 @@
cpufreq = (au_readl(SYS_CPUPLL) & 0x3F) * 12;
printk(KERN_INFO "(PRID %08lx) @ %ld MHz\n", prid, cpufreq);
- bclk = sp->cpu_bclk;
- if (bclk)
- {
+ if (sp->cpu_bclk) {
/* Enable BCLK switching */
- bclk = au_readl(0xB190003C);
- au_writel(bclk | 0x60, 0xB190003C);
- printk("BCLK switching enabled!\n");
+ bclk = au_readl(SYS_POWERCTRL);
+ au_writel(bclk | 0x60, SYS_POWERCTRL);
+ printk(KERN_INFO "BCLK switching enabled!\n");
}
- if (sp->cpu_od) {
- /* Various early Au1000 Errata corrected by this */
- set_c0_config(1<<19); /* Set Config[OD] */
- }
- else {
+ if (sp->cpu_od)
+ /* Various early Au1xx0 errata corrected by this */
+ set_c0_config(1 << 19); /* Set Config[OD] */
+ else
/* Clear to obtain best system bus performance */
- clear_c0_config(1<<19); /* Clear Config[OD] */
- }
+ clear_c0_config(1 << 19); /* Clear Config[OD] */
argptr = prom_getcmdline();
#ifdef CONFIG_SERIAL_8250_CONSOLE
- if ((argptr = strstr(argptr, "console=")) == NULL) {
+ argptr = strstr(argptr, "console=");
+ if (argptr == NULL) {
argptr = prom_getcmdline();
strcat(argptr, " console=ttyS0,115200");
}
#endif
#ifdef CONFIG_FB_AU1100
- if ((argptr = strstr(argptr, "video=")) == NULL) {
- argptr = prom_getcmdline();
- /* default panel */
- /*strcat(argptr, " video=au1100fb:panel:Sharp_320x240_16");*/
- }
+ argptr = strstr(argptr, "video=");
+ if (argptr == NULL) {
+ argptr = prom_getcmdline();
+ /* default panel */
+ /*strcat(argptr, " video=au1100fb:panel:Sharp_320x240_16");*/
+ }
#endif
-
#if defined(CONFIG_SOUND_AU1X00) && !defined(CONFIG_SOC_AU1000)
/* au1000 does not support vra, au1500 and au1100 do */
strcat(argptr, " au1000_audio=vra");
@@ -129,7 +125,7 @@
/* This routine should be valid for all Au1x based boards */
phys_t __fixup_bigphys_addr(phys_t phys_addr, phys_t size)
{
- /* Don't fixup 36 bit addresses */
+ /* Don't fixup 36-bit addresses */
if ((phys_addr >> 32) != 0)
return phys_addr;
@@ -145,17 +141,17 @@
}
#endif
- /* All Au1x SOCs have a pcmcia controller */
- /* We setup our 32 bit pseudo addresses to be equal to the
- * 36 bit addr >> 4, to make it easier to check the address
+ /*
+ * All Au1xx0 SOCs have a PCMCIA controller.
+ * We setup our 32-bit pseudo addresses to be equal to the
+ * 36-bit addr >> 4, to make it easier to check the address
* and fix it.
- * The Au1x socket 0 phys attribute address is 0xF 4000 0000.
+ * The PCMCIA socket 0 physical attribute address is 0xF 4000 0000.
* The pseudo address we use is 0xF400 0000. Any address over
- * 0xF400 0000 is a pcmcia pseudo address.
+ * 0xF400 0000 is a PCMCIA pseudo address.
*/
- if ((phys_addr >= 0xF4000000) && (phys_addr < 0xFFFFFFFF)) {
+ if ((phys_addr >= 0xF4000000) && (phys_addr < 0xFFFFFFFF))
return (phys_t)(phys_addr << 4);
- }
/* default nop */
return phys_addr;
diff --git a/arch/mips/au1000/common/time.c b/arch/mips/au1000/common/time.c
index bdb6d73..563d939 100644
--- a/arch/mips/au1000/common/time.c
+++ b/arch/mips/au1000/common/time.c
@@ -25,11 +25,9 @@
*
* Setting up the clock on the MIPS boards.
*
- * Update. Always configure the kernel with CONFIG_NEW_TIME_C. This
- * will use the user interface gettimeofday() functions from the
- * arch/mips/kernel/time.c, and we provide the clock interrupt processing
- * and the timer offset compute functions. If CONFIG_PM is selected,
- * we also ensure the 32KHz timer is available. -- Dan
+ * We provide the clock interrupt processing and the timer offset compute
+ * functions. If CONFIG_PM is selected, we also ensure the 32KHz timer is
+ * available. -- Dan
*/
#include <linux/types.h>
@@ -47,8 +45,7 @@
#if HZ < 100 || HZ > 1000
#error "unsupported HZ value! Must be in [100,1000]"
#endif
-#define MATCH20_INC (328*100/HZ) /* magic number 328 is for HZ=100... */
-extern void startup_match20_interrupt(irq_handler_t handler);
+#define MATCH20_INC (328 * 100 / HZ) /* magic number 328 is for HZ=100... */
static unsigned long last_pc0, last_match20;
#endif
@@ -61,7 +58,7 @@
{
unsigned long pc0;
int time_elapsed;
- static int jiffie_drift = 0;
+ static int jiffie_drift;
if (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_M20) {
/* should never happen! */
@@ -70,13 +67,11 @@
}
pc0 = au_readl(SYS_TOYREAD);
- if (pc0 < last_match20) {
+ if (pc0 < last_match20)
/* counter overflowed */
time_elapsed = (0xffffffff - last_match20) + pc0;
- }
- else {
+ else
time_elapsed = pc0 - last_match20;
- }
while (time_elapsed > 0) {
do_timer(1);
@@ -92,8 +87,9 @@
au_writel(last_match20 + MATCH20_INC, SYS_TOYMATCH2);
au_sync();
- /* our counter ticks at 10.009765625 ms/tick, we we're running
- * almost 10uS too slow per tick.
+ /*
+ * Our counter ticks at 10.009765625 ms/tick, we we're running
+ * almost 10 uS too slow per tick.
*/
if (jiffie_drift >= 999) {
@@ -117,20 +113,17 @@
/* When we wakeup from sleep, we have to "catch up" on all of the
* timer ticks we have missed.
*/
-void
-wakeup_counter0_adjust(void)
+void wakeup_counter0_adjust(void)
{
unsigned long pc0;
int time_elapsed;
pc0 = au_readl(SYS_TOYREAD);
- if (pc0 < last_match20) {
+ if (pc0 < last_match20)
/* counter overflowed */
time_elapsed = (0xffffffff - last_match20) + pc0;
- }
- else {
+ else
time_elapsed = pc0 - last_match20;
- }
while (time_elapsed > 0) {
time_elapsed -= MATCH20_INC;
@@ -143,10 +136,8 @@
}
-/* This is just for debugging to set the timer for a sleep delay.
-*/
-void
-wakeup_counter0_set(int ticks)
+/* This is just for debugging to set the timer for a sleep delay. */
+void wakeup_counter0_set(int ticks)
{
unsigned long pc0;
@@ -157,21 +148,22 @@
}
#endif
-/* I haven't found anyone that doesn't use a 12 MHz source clock,
+/*
+ * I haven't found anyone that doesn't use a 12 MHz source clock,
* but just in case.....
*/
#define AU1000_SRC_CLK 12000000
/*
* We read the real processor speed from the PLL. This is important
- * because it is more accurate than computing it from the 32KHz
+ * because it is more accurate than computing it from the 32 KHz
* counter, if it exists. If we don't have an accurate processor
* speed, all of the peripherals that derive their clocks based on
* this advertised speed will introduce error and sometimes not work
* properly. This function is futher convoluted to still allow configurations
* to do that in case they have really, really old silicon with a
- * write-only PLL register, that we need the 32KHz when power management
- * "wait" is enabled, and we need to detect if the 32KHz isn't present
+ * write-only PLL register, that we need the 32 KHz when power management
+ * "wait" is enabled, and we need to detect if the 32 KHz isn't present
* but requested......got it? :-) -- Dan
*/
unsigned long calc_clock(void)
@@ -182,8 +174,7 @@
spin_lock_irqsave(&time_lock, flags);
- /* Power management cares if we don't have a 32KHz counter.
- */
+ /* Power management cares if we don't have a 32 KHz counter. */
no_au1xxx_32khz = 0;
counter = au_readl(SYS_COUNTER_CNTRL);
if (counter & SYS_CNTRL_E0) {
@@ -193,7 +184,7 @@
while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_T1S);
/* RTC now ticks at 32.768/16 kHz */
- au_writel(trim_divide-1, SYS_RTCTRIM);
+ au_writel(trim_divide - 1, SYS_RTCTRIM);
while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_T1S);
while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S);
@@ -215,9 +206,11 @@
#endif
else
cpu_speed = (au_readl(SYS_CPUPLL) & 0x0000003f) * AU1000_SRC_CLK;
+ /* On Alchemy CPU:counter ratio is 1:1 */
mips_hpt_frequency = cpu_speed;
- // Equation: Baudrate = CPU / (SD * 2 * CLKDIV * 16)
- set_au1x00_uart_baud_base(cpu_speed / (2 * ((int)(au_readl(SYS_POWERCTRL)&0x03) + 2) * 16));
+ /* Equation: Baudrate = CPU / (SD * 2 * CLKDIV * 16) */
+ set_au1x00_uart_baud_base(cpu_speed / (2 * ((int)(au_readl(SYS_POWERCTRL)
+ & 0x03) + 2) * 16));
spin_unlock_irqrestore(&time_lock, flags);
return cpu_speed;
}
@@ -228,10 +221,10 @@
est_freq += 5000; /* round */
est_freq -= est_freq%10000;
- printk("CPU frequency %d.%02d MHz\n", est_freq/1000000,
- (est_freq%1000000)*100/1000000);
- set_au1x00_speed(est_freq);
- set_au1x00_lcd_clock(); // program the LCD clock
+ printk(KERN_INFO "CPU frequency %u.%02u MHz\n",
+ est_freq / 1000000, ((est_freq % 1000000) * 100) / 1000000);
+ set_au1x00_speed(est_freq);
+ set_au1x00_lcd_clock(); /* program the LCD clock */
#ifdef CONFIG_PM
/*
@@ -243,30 +236,29 @@
* counter 0 interrupt as a special irq and it doesn't show
* up under /proc/interrupts.
*
- * Check to ensure we really have a 32KHz oscillator before
+ * Check to ensure we really have a 32 KHz oscillator before
* we do this.
*/
if (no_au1xxx_32khz)
- printk("WARNING: no 32KHz clock found.\n");
+ printk(KERN_WARNING "WARNING: no 32KHz clock found.\n");
else {
while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C0S);
au_writel(0, SYS_TOYWRITE);
while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C0S);
- au_writel(au_readl(SYS_WAKEMSK) | (1<<8), SYS_WAKEMSK);
+ au_writel(au_readl(SYS_WAKEMSK) | (1 << 8), SYS_WAKEMSK);
au_writel(~0, SYS_WAKESRC);
au_sync();
while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_M20);
- /* setup match20 to interrupt once every HZ */
+ /* Setup match20 to interrupt once every HZ */
last_pc0 = last_match20 = au_readl(SYS_TOYREAD);
au_writel(last_match20 + MATCH20_INC, SYS_TOYMATCH2);
au_sync();
while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_M20);
setup_irq(AU1000_TOY_MATCH2_INT, &counter0_action);
- /* We can use the real 'wait' instruction.
- */
+ /* We can use the real 'wait' instruction. */
allow_au1k_wait = 1;
}
diff --git a/arch/mips/au1000/db1x00/Makefile b/arch/mips/au1000/db1x00/Makefile
index 51d62bd..274db3b 100644
--- a/arch/mips/au1000/db1x00/Makefile
+++ b/arch/mips/au1000/db1x00/Makefile
@@ -1,8 +1,8 @@
#
-# Copyright 2000 MontaVista Software Inc.
-# Author: MontaVista Software, Inc.
-# ppopov@mvista.com or source@mvista.com
+# Copyright 2000, 2008 MontaVista Software Inc.
+# Author: MontaVista Software, Inc. <source@mvista.com>
#
-# Makefile for the Alchemy Semiconductor Db1x00 board.
+# Makefile for the Alchemy Semiconductor DBAu1xx0 boards.
+#
lib-y := init.o board_setup.o irqmap.o
diff --git a/arch/mips/au1000/db1x00/board_setup.c b/arch/mips/au1000/db1x00/board_setup.c
index b7dcbad..9e5ccbb 100644
--- a/arch/mips/au1000/db1x00/board_setup.c
+++ b/arch/mips/au1000/db1x00/board_setup.c
@@ -3,9 +3,8 @@
* BRIEF MODULE DESCRIPTION
* Alchemy Db1x00 board setup.
*
- * Copyright 2000 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2000, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -37,49 +36,49 @@
void board_reset(void)
{
- /* Hit BCSR.SYSTEM_CONTROL[SW_RST] */
+ /* Hit BCSR.SW_RESET[RESET] */
bcsr->swreset = 0x0000;
}
void __init board_setup(void)
{
- u32 pin_func;
+ u32 pin_func = 0;
- pin_func = 0;
- /* not valid for 1550 */
-
-#if defined(CONFIG_IRDA) && (defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1100))
- /* set IRFIRSEL instead of GPIO15 */
- pin_func = au_readl(SYS_PINFUNC) | (u32)((1<<8));
+ /* Not valid for Au1550 */
+#if defined(CONFIG_IRDA) && \
+ (defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1100))
+ /* Set IRFIRSEL instead of GPIO15 */
+ pin_func = au_readl(SYS_PINFUNC) | SYS_PF_IRF;
au_writel(pin_func, SYS_PINFUNC);
- /* power off until the driver is in use */
+ /* Power off until the driver is in use */
bcsr->resets &= ~BCSR_RESETS_IRDA_MODE_MASK;
- bcsr->resets |= BCSR_RESETS_IRDA_MODE_OFF;
+ bcsr->resets |= BCSR_RESETS_IRDA_MODE_OFF;
au_sync();
#endif
bcsr->pcmcia = 0x0000; /* turn off PCMCIA power */
#ifdef CONFIG_MIPS_MIRAGE
- /* enable GPIO[31:0] inputs */
+ /* Enable GPIO[31:0] inputs */
au_writel(0, SYS_PININPUTEN);
- /* GPIO[20] is output, tristate the other input primary GPIO's */
- au_writel((u32)(~(1<<20)), SYS_TRIOUTCLR);
+ /* GPIO[20] is output, tristate the other input primary GPIOs */
+ au_writel(~(1 << 20), SYS_TRIOUTCLR);
- /* set GPIO[210:208] instead of SSI_0 */
- pin_func = au_readl(SYS_PINFUNC) | (u32)(1);
+ /* Set GPIO[210:208] instead of SSI_0 */
+ pin_func = au_readl(SYS_PINFUNC) | SYS_PF_S0;
- /* set GPIO[215:211] for LED's */
- pin_func |= (u32)((5<<2));
+ /* Set GPIO[215:211] for LEDs */
+ pin_func |= 5 << 2;
- /* set GPIO[214:213] for more LED's */
- pin_func |= (u32)((5<<12));
+ /* Set GPIO[214:213] for more LEDs */
+ pin_func |= 5 << 12;
- /* set GPIO[207:200] instead of PCMCIA/LCD */
- pin_func |= (u32)((3<<17));
+ /* Set GPIO[207:200] instead of PCMCIA/LCD */
+ pin_func |= SYS_PF_LCD | SYS_PF_PC;
au_writel(pin_func, SYS_PINFUNC);
- /* Enable speaker amplifier. This should
+ /*
+ * Enable speaker amplifier. This should
* be part of the audio driver.
*/
au_writel(au_readl(GPIO2_DIR) | 0x200, GPIO2_DIR);
@@ -89,21 +88,21 @@
au_sync();
#ifdef CONFIG_MIPS_DB1000
- printk("AMD Alchemy Au1000/Db1000 Board\n");
+ printk(KERN_INFO "AMD Alchemy Au1000/Db1000 Board\n");
#endif
#ifdef CONFIG_MIPS_DB1500
- printk("AMD Alchemy Au1500/Db1500 Board\n");
+ printk(KERN_INFO "AMD Alchemy Au1500/Db1500 Board\n");
#endif
#ifdef CONFIG_MIPS_DB1100
- printk("AMD Alchemy Au1100/Db1100 Board\n");
+ printk(KERN_INFO "AMD Alchemy Au1100/Db1100 Board\n");
#endif
#ifdef CONFIG_MIPS_BOSPORUS
- printk("AMD Alchemy Bosporus Board\n");
+ printk(KERN_INFO "AMD Alchemy Bosporus Board\n");
#endif
#ifdef CONFIG_MIPS_MIRAGE
- printk("AMD Alchemy Mirage Board\n");
+ printk(KERN_INFO "AMD Alchemy Mirage Board\n");
#endif
#ifdef CONFIG_MIPS_DB1550
- printk("AMD Alchemy Au1550/Db1550 Board\n");
+ printk(KERN_INFO "AMD Alchemy Au1550/Db1550 Board\n");
#endif
}
diff --git a/arch/mips/au1000/db1x00/init.c b/arch/mips/au1000/db1x00/init.c
index d3b967c..5ebe0de 100644
--- a/arch/mips/au1000/db1x00/init.c
+++ b/arch/mips/au1000/db1x00/init.c
@@ -2,9 +2,8 @@
* BRIEF MODULE DESCRIPTION
* PB1000 board setup
*
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2001, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -49,8 +48,8 @@
unsigned long memsize;
prom_argc = fw_arg0;
- prom_argv = (char **) fw_arg1;
- prom_envp = (char **) fw_arg2;
+ prom_argv = (char **)fw_arg1;
+ prom_envp = (char **)fw_arg2;
prom_init_cmdline();
@@ -58,6 +57,6 @@
if (!memsize_str)
memsize = 0x04000000;
else
- memsize = simple_strtol(memsize_str, NULL, 0);
+ memsize = strict_strtol(memsize_str, 0, NULL);
add_memory_region(0, memsize, BOOT_MEM_RAM);
}
diff --git a/arch/mips/au1000/db1x00/irqmap.c b/arch/mips/au1000/db1x00/irqmap.c
index eaa50c7..94c090e 100644
--- a/arch/mips/au1000/db1x00/irqmap.c
+++ b/arch/mips/au1000/db1x00/irqmap.c
@@ -32,32 +32,32 @@
#ifdef CONFIG_MIPS_DB1500
char irq_tab_alchemy[][5] __initdata = {
- [12] = { -1, INTA, INTX, INTX, INTX}, /* IDSEL 12 - HPT371 */
- [13] = { -1, INTA, INTB, INTC, INTD}, /* IDSEL 13 - PCI slot */
+ [12] = { -1, INTA, INTX, INTX, INTX }, /* IDSEL 12 - HPT371 */
+ [13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot */
};
#endif
#ifdef CONFIG_MIPS_BOSPORUS
char irq_tab_alchemy[][5] __initdata = {
- [11] = { -1, INTA, INTB, INTX, INTX}, /* IDSEL 11 - miniPCI */
- [12] = { -1, INTA, INTX, INTX, INTX}, /* IDSEL 12 - SN1741 */
- [13] = { -1, INTA, INTB, INTC, INTD}, /* IDSEL 13 - PCI slot */
+ [11] = { -1, INTA, INTB, INTX, INTX }, /* IDSEL 11 - miniPCI */
+ [12] = { -1, INTA, INTX, INTX, INTX }, /* IDSEL 12 - SN1741 */
+ [13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot */
};
#endif
#ifdef CONFIG_MIPS_MIRAGE
char irq_tab_alchemy[][5] __initdata = {
- [11] = { -1, INTD, INTX, INTX, INTX}, /* IDSEL 11 - SMI VGX */
- [12] = { -1, INTX, INTX, INTC, INTX}, /* IDSEL 12 - PNX1300 */
- [13] = { -1, INTA, INTB, INTX, INTX}, /* IDSEL 13 - miniPCI */
+ [11] = { -1, INTD, INTX, INTX, INTX }, /* IDSEL 11 - SMI VGX */
+ [12] = { -1, INTX, INTX, INTC, INTX }, /* IDSEL 12 - PNX1300 */
+ [13] = { -1, INTA, INTB, INTX, INTX }, /* IDSEL 13 - miniPCI */
};
#endif
#ifdef CONFIG_MIPS_DB1550
char irq_tab_alchemy[][5] __initdata = {
- [11] = { -1, INTC, INTX, INTX, INTX}, /* IDSEL 11 - on-board HPT371 */
- [12] = { -1, INTB, INTC, INTD, INTA}, /* IDSEL 12 - PCI slot 2 (left) */
- [13] = { -1, INTA, INTB, INTC, INTD}, /* IDSEL 13 - PCI slot 1 (right) */
+ [11] = { -1, INTC, INTX, INTX, INTX }, /* IDSEL 11 - on-board HPT371 */
+ [12] = { -1, INTB, INTC, INTD, INTA }, /* IDSEL 12 - PCI slot 2 (left) */
+ [13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot 1 (right) */
};
#endif
diff --git a/arch/mips/au1000/mtx-1/Makefile b/arch/mips/au1000/mtx-1/Makefile
index 85a9094..7c67b3d 100644
--- a/arch/mips/au1000/mtx-1/Makefile
+++ b/arch/mips/au1000/mtx-1/Makefile
@@ -1,7 +1,6 @@
#
# Copyright 2003 MontaVista Software Inc.
-# Author: MontaVista Software, Inc.
-# ppopov@mvista.com or source@mvista.com
+# Author: MontaVista Software, Inc. <source@mvista.com>
# Bruno Randolf <bruno.randolf@4g-systems.biz>
#
# Makefile for 4G Systems MTX-1 board.
diff --git a/arch/mips/au1000/mtx-1/board_setup.c b/arch/mips/au1000/mtx-1/board_setup.c
index 5736354..3f80791 100644
--- a/arch/mips/au1000/mtx-1/board_setup.c
+++ b/arch/mips/au1000/mtx-1/board_setup.c
@@ -3,9 +3,8 @@
* BRIEF MODULE DESCRIPTION
* 4G Systems MTX-1 board setup.
*
- * Copyright 2003 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2003, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
* Bruno Randolf <bruno.randolf@4g-systems.biz>
*
* This program is free software; you can redistribute it and/or modify it
@@ -34,7 +33,7 @@
#include <asm/mach-au1x00/au1000.h>
extern int (*board_pci_idsel)(unsigned int devsel, int assert);
-int mtx1_pci_idsel(unsigned int devsel, int assert);
+int mtx1_pci_idsel(unsigned int devsel, int assert);
void board_reset(void)
{
@@ -45,36 +44,36 @@
void __init board_setup(void)
{
#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
- // enable USB power switch
- au_writel( au_readl(GPIO2_DIR) | 0x10, GPIO2_DIR );
- au_writel( 0x100000, GPIO2_OUTPUT );
+ /* Enable USB power switch */
+ au_writel(au_readl(GPIO2_DIR) | 0x10, GPIO2_DIR);
+ au_writel(0x100000, GPIO2_OUTPUT);
#endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */
#ifdef CONFIG_PCI
#if defined(__MIPSEB__)
- au_writel(0xf | (2<<6) | (1<<4), Au1500_PCI_CFG);
+ au_writel(0xf | (2 << 6) | (1 << 4), Au1500_PCI_CFG);
#else
au_writel(0xf, Au1500_PCI_CFG);
#endif
#endif
- // initialize sys_pinfunc:
- au_writel( SYS_PF_NI2, SYS_PINFUNC );
+ /* Initialize sys_pinfunc */
+ au_writel(SYS_PF_NI2, SYS_PINFUNC);
- // initialize GPIO
- au_writel( 0xFFFFFFFF, SYS_TRIOUTCLR );
- au_writel( 0x00000001, SYS_OUTPUTCLR ); // set M66EN (PCI 66MHz) to OFF
- au_writel( 0x00000008, SYS_OUTPUTSET ); // set PCI CLKRUN# to OFF
- au_writel( 0x00000002, SYS_OUTPUTSET ); // set EXT_IO3 ON
- au_writel( 0x00000020, SYS_OUTPUTCLR ); // set eth PHY TX_ER to OFF
+ /* Initialize GPIO */
+ au_writel(0xFFFFFFFF, SYS_TRIOUTCLR);
+ au_writel(0x00000001, SYS_OUTPUTCLR); /* set M66EN (PCI 66MHz) to OFF */
+ au_writel(0x00000008, SYS_OUTPUTSET); /* set PCI CLKRUN# to OFF */
+ au_writel(0x00000002, SYS_OUTPUTSET); /* set EXT_IO3 ON */
+ au_writel(0x00000020, SYS_OUTPUTCLR); /* set eth PHY TX_ER to OFF */
- // enable LED and set it to green
- au_writel( au_readl(GPIO2_DIR) | 0x1800, GPIO2_DIR );
- au_writel( 0x18000800, GPIO2_OUTPUT );
+ /* Enable LED and set it to green */
+ au_writel(au_readl(GPIO2_DIR) | 0x1800, GPIO2_DIR);
+ au_writel(0x18000800, GPIO2_OUTPUT);
board_pci_idsel = mtx1_pci_idsel;
- printk("4G Systems MTX-1 Board\n");
+ printk(KERN_INFO "4G Systems MTX-1 Board\n");
}
int
@@ -82,20 +81,18 @@
{
#define MTX_IDSEL_ONLY_0_AND_3 0
#if MTX_IDSEL_ONLY_0_AND_3
- if (devsel != 0 && devsel != 3) {
- printk("*** not 0 or 3\n");
- return 0;
- }
+ if (devsel != 0 && devsel != 3) {
+ printk(KERN_ERR "*** not 0 or 3\n");
+ return 0;
+ }
#endif
- if (assert && devsel != 0) {
- // suppress signal to cardbus
- au_writel( 0x00000002, SYS_OUTPUTCLR ); // set EXT_IO3 OFF
- }
- else {
- au_writel( 0x00000002, SYS_OUTPUTSET ); // set EXT_IO3 ON
- }
- au_sync_udelay(1);
- return 1;
+ if (assert && devsel != 0)
+ /* Suppress signal to Cardbus */
+ au_writel(0x00000002, SYS_OUTPUTCLR); /* set EXT_IO3 OFF */
+ else
+ au_writel(0x00000002, SYS_OUTPUTSET); /* set EXT_IO3 ON */
+ au_sync_udelay(1);
+ return 1;
}
diff --git a/arch/mips/au1000/mtx-1/init.c b/arch/mips/au1000/mtx-1/init.c
index c015cbc..33a4aeb 100644
--- a/arch/mips/au1000/mtx-1/init.c
+++ b/arch/mips/au1000/mtx-1/init.c
@@ -3,9 +3,8 @@
* BRIEF MODULE DESCRIPTION
* 4G Systems MTX-1 board setup
*
- * Copyright 2003 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2003, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
* Bruno Randolf <bruno.randolf@4g-systems.biz>
*
* This program is free software; you can redistribute it and/or modify it
@@ -47,8 +46,8 @@
unsigned long memsize;
prom_argc = fw_arg0;
- prom_argv = (char **) fw_arg1;
- prom_envp = (char **) fw_arg2;
+ prom_argv = (char **)fw_arg1;
+ prom_envp = (char **)fw_arg2;
prom_init_cmdline();
@@ -56,6 +55,6 @@
if (!memsize_str)
memsize = 0x04000000;
else
- memsize = simple_strtol(memsize_str, NULL, 0);
+ memsize = strict_strtol(memsize_str, 0, NULL);
add_memory_region(0, memsize, BOOT_MEM_RAM);
}
diff --git a/arch/mips/au1000/mtx-1/irqmap.c b/arch/mips/au1000/mtx-1/irqmap.c
index 78d70c4..f2bf029 100644
--- a/arch/mips/au1000/mtx-1/irqmap.c
+++ b/arch/mips/au1000/mtx-1/irqmap.c
@@ -31,18 +31,18 @@
#include <asm/mach-au1x00/au1000.h>
char irq_tab_alchemy[][5] __initdata = {
- [0] = { -1, INTA, INTA, INTX, INTX}, /* IDSEL 00 - AdapterA-Slot0 (top) */
- [1] = { -1, INTB, INTA, INTX, INTX}, /* IDSEL 01 - AdapterA-Slot1 (bottom) */
- [2] = { -1, INTC, INTD, INTX, INTX}, /* IDSEL 02 - AdapterB-Slot0 (top) */
- [3] = { -1, INTD, INTC, INTX, INTX}, /* IDSEL 03 - AdapterB-Slot1 (bottom) */
- [4] = { -1, INTA, INTB, INTX, INTX}, /* IDSEL 04 - AdapterC-Slot0 (top) */
- [5] = { -1, INTB, INTA, INTX, INTX}, /* IDSEL 05 - AdapterC-Slot1 (bottom) */
- [6] = { -1, INTC, INTD, INTX, INTX}, /* IDSEL 06 - AdapterD-Slot0 (top) */
- [7] = { -1, INTD, INTC, INTX, INTX}, /* IDSEL 07 - AdapterD-Slot1 (bottom) */
+ [0] = { -1, INTA, INTA, INTX, INTX }, /* IDSEL 00 - AdapterA-Slot0 (top) */
+ [1] = { -1, INTB, INTA, INTX, INTX }, /* IDSEL 01 - AdapterA-Slot1 (bottom) */
+ [2] = { -1, INTC, INTD, INTX, INTX }, /* IDSEL 02 - AdapterB-Slot0 (top) */
+ [3] = { -1, INTD, INTC, INTX, INTX }, /* IDSEL 03 - AdapterB-Slot1 (bottom) */
+ [4] = { -1, INTA, INTB, INTX, INTX }, /* IDSEL 04 - AdapterC-Slot0 (top) */
+ [5] = { -1, INTB, INTA, INTX, INTX }, /* IDSEL 05 - AdapterC-Slot1 (bottom) */
+ [6] = { -1, INTC, INTD, INTX, INTX }, /* IDSEL 06 - AdapterD-Slot0 (top) */
+ [7] = { -1, INTD, INTC, INTX, INTX }, /* IDSEL 07 - AdapterD-Slot1 (bottom) */
};
struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
- { AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0},
+ { AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0 },
{ AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 },
diff --git a/arch/mips/au1000/mtx-1/platform.c b/arch/mips/au1000/mtx-1/platform.c
index a7edbf0..9807be3 100644
--- a/arch/mips/au1000/mtx-1/platform.c
+++ b/arch/mips/au1000/mtx-1/platform.c
@@ -21,11 +21,10 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/leds.h>
+#include <linux/gpio.h>
#include <linux/gpio_keys.h>
#include <linux/input.h>
-#include <asm/gpio.h>
-
static struct gpio_keys_button mtx1_gpio_button[] = {
{
.gpio = 207,
diff --git a/arch/mips/au1000/pb1000/Makefile b/arch/mips/au1000/pb1000/Makefile
index daa1a50..99bbec0 100644
--- a/arch/mips/au1000/pb1000/Makefile
+++ b/arch/mips/au1000/pb1000/Makefile
@@ -1,8 +1,8 @@
#
-# Copyright 2000 MontaVista Software Inc.
-# Author: MontaVista Software, Inc.
-# ppopov@mvista.com or source@mvista.com
+# Copyright 2000, 2008 MontaVista Software Inc.
+# Author: MontaVista Software, Inc. <source@mvista.com>
#
-# Makefile for the Alchemy Semiconductor PB1000 board.
+# Makefile for the Alchemy Semiconductor Pb1000 board.
+#
lib-y := init.o board_setup.o irqmap.o
diff --git a/arch/mips/au1000/pb1000/board_setup.c b/arch/mips/au1000/pb1000/board_setup.c
index 33f15ac..25df167 100644
--- a/arch/mips/au1000/pb1000/board_setup.c
+++ b/arch/mips/au1000/pb1000/board_setup.c
@@ -1,7 +1,6 @@
/*
- * Copyright 2000 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2000, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -40,128 +39,126 @@
u32 sys_freqctrl, sys_clksrc;
u32 prid = read_c0_prid();
- // set AUX clock to 12MHz * 8 = 96 MHz
+ /* Set AUX clock to 12 MHz * 8 = 96 MHz */
au_writel(8, SYS_AUXPLL);
au_writel(0, SYS_PINSTATERD);
udelay(100);
#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
- /* zero and disable FREQ2 */
+ /* Zero and disable FREQ2 */
sys_freqctrl = au_readl(SYS_FREQCTRL0);
sys_freqctrl &= ~0xFFF00000;
au_writel(sys_freqctrl, SYS_FREQCTRL0);
- /* zero and disable USBH/USBD clocks */
+ /* Zero and disable USBH/USBD clocks */
sys_clksrc = au_readl(SYS_CLKSRC);
- sys_clksrc &= ~0x00007FE0;
+ sys_clksrc &= ~(SYS_CS_CUD | SYS_CS_DUD | SYS_CS_MUD_MASK |
+ SYS_CS_CUH | SYS_CS_DUH | SYS_CS_MUH_MASK);
au_writel(sys_clksrc, SYS_CLKSRC);
sys_freqctrl = au_readl(SYS_FREQCTRL0);
sys_freqctrl &= ~0xFFF00000;
sys_clksrc = au_readl(SYS_CLKSRC);
- sys_clksrc &= ~0x00007FE0;
+ sys_clksrc &= ~(SYS_CS_CUD | SYS_CS_DUD | SYS_CS_MUD_MASK |
+ SYS_CS_CUH | SYS_CS_DUH | SYS_CS_MUH_MASK);
- switch (prid & 0x000000FF)
- {
+ switch (prid & 0x000000FF) {
case 0x00: /* DA */
case 0x01: /* HA */
case 0x02: /* HB */
- /* CPU core freq to 48MHz to slow it way down... */
- au_writel(4, SYS_CPUPLL);
+ /* CPU core freq to 48 MHz to slow it way down... */
+ au_writel(4, SYS_CPUPLL);
- /*
- * Setup 48MHz FREQ2 from CPUPLL for USB Host
- */
- /* FRDIV2=3 -> div by 8 of 384MHz -> 48MHz */
- sys_freqctrl |= ((3<<22) | (1<<21) | (0<<20));
- au_writel(sys_freqctrl, SYS_FREQCTRL0);
+ /*
+ * Setup 48 MHz FREQ2 from CPUPLL for USB Host
+ * FRDIV2 = 3 -> div by 8 of 384 MHz -> 48 MHz
+ */
+ sys_freqctrl |= (3 << SYS_FC_FRDIV2_BIT) | SYS_FC_FE2;
+ au_writel(sys_freqctrl, SYS_FREQCTRL0);
- /* CPU core freq to 384MHz */
- au_writel(0x20, SYS_CPUPLL);
+ /* CPU core freq to 384 MHz */
+ au_writel(0x20, SYS_CPUPLL);
- printk("Au1000: 48MHz OHCI workaround enabled\n");
+ printk(KERN_INFO "Au1000: 48 MHz OHCI workaround enabled\n");
break;
- default: /* HC and newer */
- // FREQ2 = aux/2 = 48 MHz
- sys_freqctrl |= ((0<<22) | (1<<21) | (1<<20));
- au_writel(sys_freqctrl, SYS_FREQCTRL0);
+ default: /* HC and newer */
+ /* FREQ2 = aux / 2 = 48 MHz */
+ sys_freqctrl |= (0 << SYS_FC_FRDIV2_BIT) |
+ SYS_FC_FE2 | SYS_FC_FS2;
+ au_writel(sys_freqctrl, SYS_FREQCTRL0);
break;
}
/*
- * Route 48MHz FREQ2 into USB Host and/or Device
+ * Route 48 MHz FREQ2 into USB Host and/or Device
*/
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
- sys_clksrc |= ((4<<12) | (0<<11) | (0<<10));
-#endif
+ sys_clksrc |= SYS_CS_MUX_FQ2 << SYS_CS_MUH_BIT;
au_writel(sys_clksrc, SYS_CLKSRC);
- // configure pins GPIO[14:9] as GPIO
- pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x8080);
+ /* Configure pins GPIO[14:9] as GPIO */
+ pin_func = au_readl(SYS_PINFUNC) & ~(SYS_PF_UR3 | SYS_PF_USB);
- // 2nd USB port is USB host
- pin_func |= 0x8000;
+ /* 2nd USB port is USB host */
+ pin_func |= SYS_PF_USB;
au_writel(pin_func, SYS_PINFUNC);
au_writel(0x2800, SYS_TRIOUTCLR);
au_writel(0x0030, SYS_OUTPUTCLR);
#endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */
- // make gpio 15 an input (for interrupt line)
- pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x100);
- // we don't need I2S, so make it available for GPIO[31:29]
- pin_func |= (1<<5);
+ /* Make GPIO 15 an input (for interrupt line) */
+ pin_func = au_readl(SYS_PINFUNC) & ~SYS_PF_IRF;
+ /* We don't need I2S, so make it available for GPIO[31:29] */
+ pin_func |= SYS_PF_I2S;
au_writel(pin_func, SYS_PINFUNC);
au_writel(0x8000, SYS_TRIOUTCLR);
- static_cfg0 = au_readl(MEM_STCFG0) & (u32)(~0xc00);
+ static_cfg0 = au_readl(MEM_STCFG0) & ~0xc00;
au_writel(static_cfg0, MEM_STCFG0);
- // configure RCE2* for LCD
+ /* configure RCE2* for LCD */
au_writel(0x00000004, MEM_STCFG2);
- // MEM_STTIME2
+ /* MEM_STTIME2 */
au_writel(0x09000000, MEM_STTIME2);
- // Set 32-bit base address decoding for RCE2*
+ /* Set 32-bit base address decoding for RCE2* */
au_writel(0x10003ff0, MEM_STADDR2);
- // PCI CPLD setup
- // expand CE0 to cover PCI
+ /*
+ * PCI CPLD setup
+ * Expand CE0 to cover PCI
+ */
au_writel(0x11803e40, MEM_STADDR1);
- // burst visibility on
+ /* Burst visibility on */
au_writel(au_readl(MEM_STCFG0) | 0x1000, MEM_STCFG0);
- au_writel(0x83, MEM_STCFG1); // ewait enabled, flash timing
- au_writel(0x33030a10, MEM_STTIME1); // slower timing for FPGA
+ au_writel(0x83, MEM_STCFG1); /* ewait enabled, flash timing */
+ au_writel(0x33030a10, MEM_STTIME1); /* slower timing for FPGA */
- /* setup the static bus controller */
+ /* Setup the static bus controller */
au_writel(0x00000002, MEM_STCFG3); /* type = PCMCIA */
au_writel(0x280E3D07, MEM_STTIME3); /* 250ns cycle time */
au_writel(0x10000000, MEM_STADDR3); /* any PCMCIA select */
-#ifdef CONFIG_PCI
- au_writel(0, PCI_BRIDGE_CONFIG); // set extend byte to 0
- au_writel(0, SDRAM_MBAR); // set mbar to 0
- au_writel(0x2, SDRAM_CMD); // enable memory accesses
- au_sync_delay(1);
-#endif
-
- /* Enable Au1000 BCLK switching - note: sed1356 must not use
- * its BCLK (Au1000 LCLK) for any timings */
- switch (prid & 0x000000FF)
- {
+ /*
+ * Enable Au1000 BCLK switching - note: sed1356 must not use
+ * its BCLK (Au1000 LCLK) for any timings
+ */
+ switch (prid & 0x000000FF) {
case 0x00: /* DA */
case 0x01: /* HA */
case 0x02: /* HB */
break;
default: /* HC and newer */
- /* Enable sys bus clock divider when IDLE state or no bus
- activity. */
+ /*
+ * Enable sys bus clock divider when IDLE state or no bus
+ * activity.
+ */
au_writel(au_readl(SYS_POWERCTRL) | (0x3 << 5), SYS_POWERCTRL);
break;
}
diff --git a/arch/mips/au1000/pb1000/init.c b/arch/mips/au1000/pb1000/init.c
index 549447df7..3837365 100644
--- a/arch/mips/au1000/pb1000/init.c
+++ b/arch/mips/au1000/pb1000/init.c
@@ -1,10 +1,9 @@
/*
* BRIEF MODULE DESCRIPTION
- * PB1000 board setup
+ * Pb1000 board setup
*
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2001, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -44,16 +43,15 @@
unsigned char *memsize_str;
unsigned long memsize;
- prom_argc = (int) fw_arg0;
- prom_argv = (char **) fw_arg1;
- prom_envp = (char **) fw_arg2;
+ prom_argc = (int)fw_arg0;
+ prom_argv = (char **)fw_arg1;
+ prom_envp = (char **)fw_arg2;
prom_init_cmdline();
memsize_str = prom_getenv("memsize");
- if (!memsize_str) {
+ if (!memsize_str)
memsize = 0x04000000;
- } else {
- memsize = simple_strtol(memsize_str, NULL, 0);
- }
+ else
+ memsize = strict_strtol(memsize_str, 0, NULL);
add_memory_region(0, memsize, BOOT_MEM_RAM);
}
diff --git a/arch/mips/au1000/pb1100/Makefile b/arch/mips/au1000/pb1100/Makefile
index 996236d..793e97c 100644
--- a/arch/mips/au1000/pb1100/Makefile
+++ b/arch/mips/au1000/pb1100/Makefile
@@ -1,8 +1,8 @@
#
-# Copyright 2000,2001 MontaVista Software Inc.
-# Author: MontaVista Software, Inc.
-# ppopov@mvista.com or source@mvista.com
+# Copyright 2000, 2001, 2008 MontaVista Software Inc.
+# Author: MontaVista Software, Inc. <source@mvista.com>
#
# Makefile for the Alchemy Semiconductor Pb1100 board.
+#
lib-y := init.o board_setup.o irqmap.o
diff --git a/arch/mips/au1000/pb1100/board_setup.c b/arch/mips/au1000/pb1100/board_setup.c
index 656164c..c0bfd59 100644
--- a/arch/mips/au1000/pb1100/board_setup.c
+++ b/arch/mips/au1000/pb1100/board_setup.c
@@ -1,7 +1,6 @@
/*
- * Copyright 2002 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2002, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -32,15 +31,15 @@
void board_reset(void)
{
- /* Hit BCSR.SYSTEM_CONTROL[SW_RST] */
- au_writel(0x00000000, 0xAE00001C);
+ /* Hit BCSR.RST_VDDI[SOFT_RESET] */
+ au_writel(0x00000000, PB1100_RST_VDDI);
}
void __init board_setup(void)
{
- volatile void __iomem * base = (volatile void __iomem *) 0xac000000UL;
+ volatile void __iomem *base = (volatile void __iomem *)0xac000000UL;
- // set AUX clock to 12MHz * 8 = 96 MHz
+ /* Set AUX clock to 12 MHz * 8 = 96 MHz */
au_writel(8, SYS_AUXPLL);
au_writel(0, SYS_PININPUTEN);
udelay(100);
@@ -49,44 +48,47 @@
{
u32 pin_func, sys_freqctrl, sys_clksrc;
- // configure pins GPIO[14:9] as GPIO
- pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x80);
+ /* Configure pins GPIO[14:9] as GPIO */
+ pin_func = au_readl(SYS_PINFUNC) & ~SYS_PF_UR3;
- /* zero and disable FREQ2 */
+ /* Zero and disable FREQ2 */
sys_freqctrl = au_readl(SYS_FREQCTRL0);
sys_freqctrl &= ~0xFFF00000;
au_writel(sys_freqctrl, SYS_FREQCTRL0);
- /* zero and disable USBH/USBD/IrDA clock */
+ /* Zero and disable USBH/USBD/IrDA clock */
sys_clksrc = au_readl(SYS_CLKSRC);
- sys_clksrc &= ~0x0000001F;
+ sys_clksrc &= ~(SYS_CS_CIR | SYS_CS_DIR | SYS_CS_MIR_MASK);
au_writel(sys_clksrc, SYS_CLKSRC);
sys_freqctrl = au_readl(SYS_FREQCTRL0);
sys_freqctrl &= ~0xFFF00000;
sys_clksrc = au_readl(SYS_CLKSRC);
- sys_clksrc &= ~0x0000001F;
+ sys_clksrc &= ~(SYS_CS_CIR | SYS_CS_DIR | SYS_CS_MIR_MASK);
- // FREQ2 = aux/2 = 48 MHz
- sys_freqctrl |= ((0<<22) | (1<<21) | (1<<20));
+ /* FREQ2 = aux / 2 = 48 MHz */
+ sys_freqctrl |= (0 << SYS_FC_FRDIV2_BIT) |
+ SYS_FC_FE2 | SYS_FC_FS2;
au_writel(sys_freqctrl, SYS_FREQCTRL0);
/*
- * Route 48MHz FREQ2 into USBH/USBD/IrDA
+ * Route 48 MHz FREQ2 into USBH/USBD/IrDA
*/
- sys_clksrc |= ((4<<2) | (0<<1) | 0 );
+ sys_clksrc |= SYS_CS_MUX_FQ2 << SYS_CS_MIR_BIT;
au_writel(sys_clksrc, SYS_CLKSRC);
- /* setup the static bus controller */
+ /* Setup the static bus controller */
au_writel(0x00000002, MEM_STCFG3); /* type = PCMCIA */
au_writel(0x280E3D07, MEM_STTIME3); /* 250ns cycle time */
au_writel(0x10000000, MEM_STADDR3); /* any PCMCIA select */
- // get USB Functionality pin state (device vs host drive pins)
- pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x8000);
- // 2nd USB port is USB host
- pin_func |= 0x8000;
+ /*
+ * Get USB Functionality pin state (device vs host drive pins).
+ */
+ pin_func = au_readl(SYS_PINFUNC) & ~SYS_PF_USB;
+ /* 2nd USB port is USB host. */
+ pin_func |= SYS_PF_USB;
au_writel(pin_func, SYS_PINFUNC);
}
#endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */
@@ -94,12 +96,12 @@
/* Enable sys bus clock divider when IDLE state or no bus activity. */
au_writel(au_readl(SYS_POWERCTRL) | (0x3 << 5), SYS_POWERCTRL);
- // Enable the RTC if not already enabled
+ /* Enable the RTC if not already enabled. */
if (!(readb(base + 0x28) & 0x20)) {
writeb(readb(base + 0x28) | 0x20, base + 0x28);
au_sync();
}
- // Put the clock in BCD mode
+ /* Put the clock in BCD mode. */
if (readb(base + 0x2C) & 0x4) { /* reg B */
writeb(readb(base + 0x2c) & ~0x4, base + 0x2c);
au_sync();
diff --git a/arch/mips/au1000/pb1100/init.c b/arch/mips/au1000/pb1100/init.c
index c913446..8355483 100644
--- a/arch/mips/au1000/pb1100/init.c
+++ b/arch/mips/au1000/pb1100/init.c
@@ -3,9 +3,8 @@
* BRIEF MODULE DESCRIPTION
* Pb1100 board setup
*
- * Copyright 2002 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2002, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -46,8 +45,8 @@
unsigned long memsize;
prom_argc = fw_arg0;
- prom_argv = (char **) fw_arg1;
- prom_envp = (char **) fw_arg3;
+ prom_argv = (char **)fw_arg1;
+ prom_envp = (char **)fw_arg3;
prom_init_cmdline();
@@ -55,7 +54,7 @@
if (!memsize_str)
memsize = 0x04000000;
else
- memsize = simple_strtol(memsize_str, NULL, 0);
+ memsize = strict_strtol(memsize_str, 0, NULL);
add_memory_region(0, memsize, BOOT_MEM_RAM);
}
diff --git a/arch/mips/au1000/pb1100/irqmap.c b/arch/mips/au1000/pb1100/irqmap.c
index b5021e3..9b7dd8b 100644
--- a/arch/mips/au1000/pb1100/irqmap.c
+++ b/arch/mips/au1000/pb1100/irqmap.c
@@ -1,6 +1,6 @@
/*
* BRIEF MODULE DESCRIPTION
- * Au1xxx irq map table
+ * Au1xx0 IRQ map table
*
* Copyright 2003 Embedded Edge, LLC
* dan@embeddededge.com
@@ -31,10 +31,10 @@
#include <asm/mach-au1x00/au1000.h>
struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
- { AU1000_GPIO_9, INTC_INT_LOW_LEVEL, 0 }, // PCMCIA Card Fully_Interted#
- { AU1000_GPIO_10, INTC_INT_LOW_LEVEL, 0 }, // PCMCIA Card STSCHG#
- { AU1000_GPIO_11, INTC_INT_LOW_LEVEL, 0 }, // PCMCIA Card IRQ#
- { AU1000_GPIO_13, INTC_INT_LOW_LEVEL, 0 }, // DC_IRQ#
+ { AU1000_GPIO_9, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card Fully_Inserted# */
+ { AU1000_GPIO_10, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card STSCHG# */
+ { AU1000_GPIO_11, INTC_INT_LOW_LEVEL, 0 }, /* PCMCIA Card IRQ# */
+ { AU1000_GPIO_13, INTC_INT_LOW_LEVEL, 0 }, /* DC_IRQ# */
};
int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);
diff --git a/arch/mips/au1000/pb1200/Makefile b/arch/mips/au1000/pb1200/Makefile
index 4fe02ea..d678adf 100644
--- a/arch/mips/au1000/pb1200/Makefile
+++ b/arch/mips/au1000/pb1200/Makefile
@@ -1,5 +1,5 @@
#
-# Makefile for the Alchemy Semiconductor PB1200 board.
+# Makefile for the Alchemy Semiconductor Pb1200/DBAu1200 boards.
#
lib-y := init.o board_setup.o irqmap.o
diff --git a/arch/mips/au1000/pb1200/board_setup.c b/arch/mips/au1000/pb1200/board_setup.c
index 4493a79..6cb21150 100644
--- a/arch/mips/au1000/pb1200/board_setup.c
+++ b/arch/mips/au1000/pb1200/board_setup.c
@@ -27,16 +27,8 @@
#include <linux/init.h>
#include <linux/sched.h>
-#include <au1000.h>
#include <prom.h>
-
-#ifdef CONFIG_MIPS_PB1200
-#include <asm/mach-pb1x00/pb1200.h>
-#endif
-
-#ifdef CONFIG_MIPS_DB1200
-#include <asm/mach-db1x00/db1200.h>
-#endif
+#include <au1xxx.h>
extern void _board_init_irq(void);
extern void (*board_init_irq)(void);
@@ -53,56 +45,57 @@
#if 0
{
- u32 pin_func;
+ u32 pin_func;
- /* Enable PSC1 SYNC for AC97. Normaly done in audio driver,
- * but it is board specific code, so put it here.
- */
- pin_func = au_readl(SYS_PINFUNC);
- au_sync();
- pin_func |= SYS_PF_MUST_BE_SET | SYS_PF_PSC1_S1;
- au_writel(pin_func, SYS_PINFUNC);
+ /*
+ * Enable PSC1 SYNC for AC97. Normaly done in audio driver,
+ * but it is board specific code, so put it here.
+ */
+ pin_func = au_readl(SYS_PINFUNC);
+ au_sync();
+ pin_func |= SYS_PF_MUST_BE_SET | SYS_PF_PSC1_S1;
+ au_writel(pin_func, SYS_PINFUNC);
- au_writel(0, (u32)bcsr|0x10); /* turn off pcmcia power */
- au_sync();
+ au_writel(0, (u32)bcsr | 0x10); /* turn off PCMCIA power */
+ au_sync();
}
#endif
#if defined(CONFIG_I2C_AU1550)
{
- u32 freq0, clksrc;
- u32 pin_func;
+ u32 freq0, clksrc;
+ u32 pin_func;
- /* Select SMBUS in CPLD */
- bcsr->resets &= ~(BCSR_RESETS_PCS0MUX);
+ /* Select SMBus in CPLD */
+ bcsr->resets &= ~BCSR_RESETS_PCS0MUX;
- pin_func = au_readl(SYS_PINFUNC);
- au_sync();
- pin_func &= ~(3<<17 | 1<<4);
- /* Set GPIOs correctly */
- pin_func |= 2<<17;
- au_writel(pin_func, SYS_PINFUNC);
- au_sync();
+ pin_func = au_readl(SYS_PINFUNC);
+ au_sync();
+ pin_func &= ~(SYS_PINFUNC_P0A | SYS_PINFUNC_P0B);
+ /* Set GPIOs correctly */
+ pin_func |= 2 << 17;
+ au_writel(pin_func, SYS_PINFUNC);
+ au_sync();
- /* The i2c driver depends on 50Mhz clock */
- freq0 = au_readl(SYS_FREQCTRL0);
- au_sync();
- freq0 &= ~(SYS_FC_FRDIV1_MASK | SYS_FC_FS1 | SYS_FC_FE1);
- freq0 |= (3<<SYS_FC_FRDIV1_BIT);
- /* 396Mhz / (3+1)*2 == 49.5Mhz */
- au_writel(freq0, SYS_FREQCTRL0);
- au_sync();
- freq0 |= SYS_FC_FE1;
- au_writel(freq0, SYS_FREQCTRL0);
- au_sync();
+ /* The I2C driver depends on 50 MHz clock */
+ freq0 = au_readl(SYS_FREQCTRL0);
+ au_sync();
+ freq0 &= ~(SYS_FC_FRDIV1_MASK | SYS_FC_FS1 | SYS_FC_FE1);
+ freq0 |= 3 << SYS_FC_FRDIV1_BIT;
+ /* 396 MHz / (3 + 1) * 2 == 49.5 MHz */
+ au_writel(freq0, SYS_FREQCTRL0);
+ au_sync();
+ freq0 |= SYS_FC_FE1;
+ au_writel(freq0, SYS_FREQCTRL0);
+ au_sync();
- clksrc = au_readl(SYS_CLKSRC);
- au_sync();
- clksrc &= ~0x01f00000;
- /* bit 22 is EXTCLK0 for PSC0 */
- clksrc |= (0x3 << 22);
- au_writel(clksrc, SYS_CLKSRC);
- au_sync();
+ clksrc = au_readl(SYS_CLKSRC);
+ au_sync();
+ clksrc &= ~(SYS_CS_CE0 | SYS_CS_DE0 | SYS_CS_ME0_MASK);
+ /* Bit 22 is EXTCLK0 for PSC0 */
+ clksrc |= SYS_CS_MUX_FQ1 << SYS_CS_ME0_BIT;
+ au_writel(clksrc, SYS_CLKSRC);
+ au_sync();
}
#endif
@@ -116,27 +109,27 @@
#endif
#endif
- /* The Pb1200 development board uses external MUX for PSC0 to
- support SMB/SPI. bcsr->resets bit 12: 0=SMB 1=SPI
- */
+ /*
+ * The Pb1200 development board uses external MUX for PSC0 to
+ * support SMB/SPI. bcsr->resets bit 12: 0=SMB 1=SPI
+ */
#ifdef CONFIG_I2C_AU1550
- bcsr->resets &= (~BCSR_RESETS_PCS0MUX);
+ bcsr->resets &= ~BCSR_RESETS_PCS0MUX;
#endif
au_sync();
#ifdef CONFIG_MIPS_PB1200
- printk("AMD Alchemy Pb1200 Board\n");
+ printk(KERN_INFO "AMD Alchemy Pb1200 Board\n");
#endif
#ifdef CONFIG_MIPS_DB1200
- printk("AMD Alchemy Db1200 Board\n");
+ printk(KERN_INFO "AMD Alchemy Db1200 Board\n");
#endif
/* Setup Pb1200 External Interrupt Controller */
board_init_irq = _board_init_irq;
}
-int
-board_au1200fb_panel(void)
+int board_au1200fb_panel(void)
{
BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR;
int p;
@@ -147,23 +140,23 @@
return p;
}
-int
-board_au1200fb_panel_init(void)
+int board_au1200fb_panel_init(void)
{
/* Apply power */
- BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR;
- bcsr->board |= (BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | BCSR_BOARD_LCDBL);
- /*printk("board_au1200fb_panel_init()\n"); */
+ BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR;
+
+ bcsr->board |= BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | BCSR_BOARD_LCDBL;
+ /* printk(KERN_DEBUG "board_au1200fb_panel_init()\n"); */
return 0;
}
-int
-board_au1200fb_panel_shutdown(void)
+int board_au1200fb_panel_shutdown(void)
{
/* Remove power */
- BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR;
- bcsr->board &= ~(BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | BCSR_BOARD_LCDBL);
- /*printk("board_au1200fb_panel_shutdown()\n"); */
+ BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR;
+
+ bcsr->board &= ~(BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD |
+ BCSR_BOARD_LCDBL);
+ /* printk(KERN_DEBUG "board_au1200fb_panel_shutdown()\n"); */
return 0;
}
-
diff --git a/arch/mips/au1000/pb1200/init.c b/arch/mips/au1000/pb1200/init.c
index 72af550..09fd63b 100644
--- a/arch/mips/au1000/pb1200/init.c
+++ b/arch/mips/au1000/pb1200/init.c
@@ -3,9 +3,8 @@
* BRIEF MODULE DESCRIPTION
* PB1200 board setup
*
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2001, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -45,16 +44,15 @@
unsigned char *memsize_str;
unsigned long memsize;
- prom_argc = (int) fw_arg0;
- prom_argv = (char **) fw_arg1;
- prom_envp = (char **) fw_arg2;
+ prom_argc = (int)fw_arg0;
+ prom_argv = (char **)fw_arg1;
+ prom_envp = (char **)fw_arg2;
prom_init_cmdline();
memsize_str = prom_getenv("memsize");
- if (!memsize_str) {
+ if (!memsize_str)
memsize = 0x08000000;
- } else {
- memsize = simple_strtol(memsize_str, NULL, 0);
- }
+ else
+ memsize = strict_strtol(memsize_str, 0, NULL);
add_memory_region(0, memsize, BOOT_MEM_RAM);
}
diff --git a/arch/mips/au1000/pb1200/irqmap.c b/arch/mips/au1000/pb1200/irqmap.c
index e61eb8e..2a505ad 100644
--- a/arch/mips/au1000/pb1200/irqmap.c
+++ b/arch/mips/au1000/pb1200/irqmap.c
@@ -39,25 +39,25 @@
#endif
struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
- { AU1000_GPIO_7, INTC_INT_LOW_LEVEL, 0 }, // This is exteranl interrupt cascade
+ /* This is external interrupt cascade */
+ { AU1000_GPIO_7, INTC_INT_LOW_LEVEL, 0 },
};
int __initdata au1xxx_nr_irqs = ARRAY_SIZE(au1xxx_irq_map);
/*
- * Support for External interrupts on the PbAu1200 Development platform.
+ * Support for External interrupts on the Pb1200 Development platform.
*/
-static volatile int pb1200_cascade_en=0;
+static volatile int pb1200_cascade_en;
-irqreturn_t pb1200_cascade_handler( int irq, void *dev_id)
+irqreturn_t pb1200_cascade_handler(int irq, void *dev_id)
{
unsigned short bisr = bcsr->int_status;
int extirq_nr = 0;
- /* Clear all the edge interrupts. This has no effect on level */
+ /* Clear all the edge interrupts. This has no effect on level. */
bcsr->int_status = bisr;
- for( ; bisr; bisr &= (bisr-1) )
- {
+ for ( ; bisr; bisr &= bisr - 1) {
extirq_nr = PB1200_INT_BEGIN + __ffs(bisr);
/* Ack and dispatch IRQ */
do_IRQ(extirq_nr);
@@ -68,26 +68,20 @@
inline void pb1200_enable_irq(unsigned int irq_nr)
{
- bcsr->intset_mask = 1<<(irq_nr - PB1200_INT_BEGIN);
- bcsr->intset = 1<<(irq_nr - PB1200_INT_BEGIN);
+ bcsr->intset_mask = 1 << (irq_nr - PB1200_INT_BEGIN);
+ bcsr->intset = 1 << (irq_nr - PB1200_INT_BEGIN);
}
inline void pb1200_disable_irq(unsigned int irq_nr)
{
- bcsr->intclr_mask = 1<<(irq_nr - PB1200_INT_BEGIN);
- bcsr->intclr = 1<<(irq_nr - PB1200_INT_BEGIN);
+ bcsr->intclr_mask = 1 << (irq_nr - PB1200_INT_BEGIN);
+ bcsr->intclr = 1 << (irq_nr - PB1200_INT_BEGIN);
}
static unsigned int pb1200_setup_cascade(void)
{
- int err;
-
- err = request_irq(AU1000_GPIO_7, &pb1200_cascade_handler,
- 0, "Pb1200 Cascade", &pb1200_cascade_handler);
- if (err)
- return err;
-
- return 0;
+ return request_irq(AU1000_GPIO_7, &pb1200_cascade_handler,
+ 0, "Pb1200 Cascade", &pb1200_cascade_handler);
}
static unsigned int pb1200_startup_irq(unsigned int irq)
@@ -132,23 +126,23 @@
unsigned int irq;
#ifdef CONFIG_MIPS_PB1200
- /* We have a problem with CPLD rev3. Enable a workaround */
+ /* We have a problem with CPLD rev 3. */
if (((bcsr->whoami & BCSR_WHOAMI_CPLD) >> 4) <= 3) {
- printk("\nWARNING!!!\n");
- printk("\nWARNING!!!\n");
- printk("\nWARNING!!!\n");
- printk("\nWARNING!!!\n");
- printk("\nWARNING!!!\n");
- printk("\nWARNING!!!\n");
- printk("Pb1200 must be at CPLD rev4. Please have Pb1200\n");
- printk("updated to latest revision. This software will not\n");
- printk("work on anything less than CPLD rev4\n");
- printk("\nWARNING!!!\n");
- printk("\nWARNING!!!\n");
- printk("\nWARNING!!!\n");
- printk("\nWARNING!!!\n");
- printk("\nWARNING!!!\n");
- printk("\nWARNING!!!\n");
+ printk(KERN_ERR "WARNING!!!\n");
+ printk(KERN_ERR "WARNING!!!\n");
+ printk(KERN_ERR "WARNING!!!\n");
+ printk(KERN_ERR "WARNING!!!\n");
+ printk(KERN_ERR "WARNING!!!\n");
+ printk(KERN_ERR "WARNING!!!\n");
+ printk(KERN_ERR "Pb1200 must be at CPLD rev 4. Please have Pb1200\n");
+ printk(KERN_ERR "updated to latest revision. This software will\n");
+ printk(KERN_ERR "not work on anything less than CPLD rev 4.\n");
+ printk(KERN_ERR "WARNING!!!\n");
+ printk(KERN_ERR "WARNING!!!\n");
+ printk(KERN_ERR "WARNING!!!\n");
+ printk(KERN_ERR "WARNING!!!\n");
+ printk(KERN_ERR "WARNING!!!\n");
+ printk(KERN_ERR "WARNING!!!\n");
panic("Game over. Your score is 0.");
}
#endif
@@ -161,6 +155,6 @@
/*
* GPIO_7 can not be hooked here, so it is hooked upon first
- * request of any source attached to the cascade
+ * request of any source attached to the cascade.
*/
}
diff --git a/arch/mips/au1000/pb1500/Makefile b/arch/mips/au1000/pb1500/Makefile
index 97a7308..602f38d 100644
--- a/arch/mips/au1000/pb1500/Makefile
+++ b/arch/mips/au1000/pb1500/Makefile
@@ -1,8 +1,8 @@
#
-# Copyright 2000,2001 MontaVista Software Inc.
-# Author: MontaVista Software, Inc.
-# ppopov@mvista.com or source@mvista.com
+# Copyright 2000, 2001, 2008 MontaVista Software Inc.
+# Author: MontaVista Software, Inc. <source@mvista.com>
#
# Makefile for the Alchemy Semiconductor Pb1500 board.
+#
lib-y := init.o board_setup.o irqmap.o
diff --git a/arch/mips/au1000/pb1500/board_setup.c b/arch/mips/au1000/pb1500/board_setup.c
index 24c652e..035771c 100644
--- a/arch/mips/au1000/pb1500/board_setup.c
+++ b/arch/mips/au1000/pb1500/board_setup.c
@@ -1,7 +1,6 @@
/*
- * Copyright 2000 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2000, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -32,8 +31,8 @@
void board_reset(void)
{
- /* Hit BCSR.SYSTEM_CONTROL[SW_RST] */
- au_writel(0x00000000, 0xAE00001C);
+ /* Hit BCSR.RST_VDDI[SOFT_RESET] */
+ au_writel(0x00000000, PB1500_RST_VDDI);
}
void __init board_setup(void)
@@ -42,7 +41,7 @@
u32 sys_freqctrl, sys_clksrc;
sys_clksrc = sys_freqctrl = pin_func = 0;
- // set AUX clock to 12MHz * 8 = 96 MHz
+ /* Set AUX clock to 12 MHz * 8 = 96 MHz */
au_writel(8, SYS_AUXPLL);
au_writel(0, SYS_PINSTATERD);
udelay(100);
@@ -51,51 +50,48 @@
/* GPIO201 is input for PCMCIA card detect */
/* GPIO203 is input for PCMCIA interrupt request */
- au_writel(au_readl(GPIO2_DIR) & (u32)(~((1<<1)|(1<<3))), GPIO2_DIR);
+ au_writel(au_readl(GPIO2_DIR) & ~((1 << 1) | (1 << 3)), GPIO2_DIR);
- /* zero and disable FREQ2 */
+ /* Zero and disable FREQ2 */
sys_freqctrl = au_readl(SYS_FREQCTRL0);
sys_freqctrl &= ~0xFFF00000;
au_writel(sys_freqctrl, SYS_FREQCTRL0);
/* zero and disable USBH/USBD clocks */
sys_clksrc = au_readl(SYS_CLKSRC);
- sys_clksrc &= ~0x00007FE0;
+ sys_clksrc &= ~(SYS_CS_CUD | SYS_CS_DUD | SYS_CS_MUD_MASK |
+ SYS_CS_CUH | SYS_CS_DUH | SYS_CS_MUH_MASK);
au_writel(sys_clksrc, SYS_CLKSRC);
sys_freqctrl = au_readl(SYS_FREQCTRL0);
sys_freqctrl &= ~0xFFF00000;
sys_clksrc = au_readl(SYS_CLKSRC);
- sys_clksrc &= ~0x00007FE0;
+ sys_clksrc &= ~(SYS_CS_CUD | SYS_CS_DUD | SYS_CS_MUD_MASK |
+ SYS_CS_CUH | SYS_CS_DUH | SYS_CS_MUH_MASK);
- // FREQ2 = aux/2 = 48 MHz
- sys_freqctrl |= ((0<<22) | (1<<21) | (1<<20));
+ /* FREQ2 = aux/2 = 48 MHz */
+ sys_freqctrl |= (0 << SYS_FC_FRDIV2_BIT) | SYS_FC_FE2 | SYS_FC_FS2;
au_writel(sys_freqctrl, SYS_FREQCTRL0);
/*
* Route 48MHz FREQ2 into USB Host and/or Device
*/
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
- sys_clksrc |= ((4<<12) | (0<<11) | (0<<10));
-#endif
+ sys_clksrc |= SYS_CS_MUX_FQ2 << SYS_CS_MUH_BIT;
au_writel(sys_clksrc, SYS_CLKSRC);
-
- pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x8000);
- // 2nd USB port is USB host
- pin_func |= 0x8000;
+ pin_func = au_readl(SYS_PINFUNC) & ~SYS_PF_USB;
+ /* 2nd USB port is USB host */
+ pin_func |= SYS_PF_USB;
au_writel(pin_func, SYS_PINFUNC);
#endif /* defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) */
-
-
#ifdef CONFIG_PCI
- // Setup PCI bus controller
+ /* Setup PCI bus controller */
au_writel(0, Au1500_PCI_CMEM);
au_writel(0x00003fff, Au1500_CFG_BASE);
#if defined(__MIPSEB__)
- au_writel(0xf | (2<<6) | (1<<4), Au1500_PCI_CFG);
+ au_writel(0xf | (2 << 6) | (1 << 4), Au1500_PCI_CFG);
#else
au_writel(0xf, Au1500_PCI_CFG);
#endif
@@ -112,11 +108,11 @@
/* Enable the RTC if not already enabled */
if (!(au_readl(0xac000028) & 0x20)) {
- printk("enabling clock ...\n");
+ printk(KERN_INFO "enabling clock ...\n");
au_writel((au_readl(0xac000028) | 0x20), 0xac000028);
}
/* Put the clock in BCD mode */
- if (au_readl(0xac00002C) & 0x4) { /* reg B */
+ if (au_readl(0xac00002c) & 0x4) { /* reg B */
au_writel(au_readl(0xac00002c) & ~0x4, 0xac00002c);
au_sync();
}
diff --git a/arch/mips/au1000/pb1500/init.c b/arch/mips/au1000/pb1500/init.c
index 488507c..49f51e1 100644
--- a/arch/mips/au1000/pb1500/init.c
+++ b/arch/mips/au1000/pb1500/init.c
@@ -1,11 +1,10 @@
/*
*
* BRIEF MODULE DESCRIPTION
- * PB1500 board setup
+ * Pb1500 board setup
*
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2001, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -45,16 +44,15 @@
unsigned char *memsize_str;
unsigned long memsize;
- prom_argc = (int) fw_arg0;
- prom_argv = (char **) fw_arg1;
- prom_envp = (char **) fw_arg2;
+ prom_argc = (int)fw_arg0;
+ prom_argv = (char **)fw_arg1;
+ prom_envp = (char **)fw_arg2;
prom_init_cmdline();
memsize_str = prom_getenv("memsize");
- if (!memsize_str) {
+ if (!memsize_str)
memsize = 0x04000000;
- } else {
- memsize = simple_strtol(memsize_str, NULL, 0);
- }
+ else
+ memsize = strict_strtol(memsize_str, 0, NULL);
add_memory_region(0, memsize, BOOT_MEM_RAM);
}
diff --git a/arch/mips/au1000/pb1500/irqmap.c b/arch/mips/au1000/pb1500/irqmap.c
index 4817ab4..39c4682 100644
--- a/arch/mips/au1000/pb1500/irqmap.c
+++ b/arch/mips/au1000/pb1500/irqmap.c
@@ -31,12 +31,12 @@
#include <asm/mach-au1x00/au1000.h>
char irq_tab_alchemy[][5] __initdata = {
- [12] = { -1, INTA, INTX, INTX, INTX}, /* IDSEL 12 - HPT370 */
- [13] = { -1, INTA, INTB, INTC, INTD}, /* IDSEL 13 - PCI slot */
+ [12] = { -1, INTA, INTX, INTX, INTX }, /* IDSEL 12 - HPT370 */
+ [13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot */
};
struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
- { AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0},
+ { AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0 },
{ AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 },
diff --git a/arch/mips/au1000/pb1550/Makefile b/arch/mips/au1000/pb1550/Makefile
index aa35bc6..7d8beca 100644
--- a/arch/mips/au1000/pb1550/Makefile
+++ b/arch/mips/au1000/pb1550/Makefile
@@ -1,9 +1,8 @@
#
-# Copyright 2000 MontaVista Software Inc.
-# Author: MontaVista Software, Inc.
-# ppopov@mvista.com or source@mvista.com
+# Copyright 2000, 2008 MontaVista Software Inc.
+# Author: MontaVista Software, Inc. <source@mvista.com>
#
-# Makefile for the Alchemy Semiconductor PB1000 board.
+# Makefile for the Alchemy Semiconductor Pb1550 board.
#
lib-y := init.o board_setup.o irqmap.o
diff --git a/arch/mips/au1000/pb1550/board_setup.c b/arch/mips/au1000/pb1550/board_setup.c
index 45d6087..0ed76b6 100644
--- a/arch/mips/au1000/pb1550/board_setup.c
+++ b/arch/mips/au1000/pb1550/board_setup.c
@@ -3,9 +3,8 @@
* BRIEF MODULE DESCRIPTION
* Alchemy Pb1550 board setup.
*
- * Copyright 2000 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2000, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -35,15 +34,16 @@
void board_reset(void)
{
- /* Hit BCSR.SYSTEM_CONTROL[SW_RST] */
- au_writew(au_readw(0xAF00001C) & ~(1<<15), 0xAF00001C);
+ /* Hit BCSR.SYSTEM[RESET] */
+ au_writew(au_readw(0xAF00001C) & ~BCSR_SYSTEM_RESET, 0xAF00001C);
}
void __init board_setup(void)
{
u32 pin_func;
- /* Enable PSC1 SYNC for AC97. Normaly done in audio driver,
+ /*
+ * Enable PSC1 SYNC for AC'97. Normaly done in audio driver,
* but it is board specific code, so put it here.
*/
pin_func = au_readl(SYS_PINFUNC);
@@ -51,8 +51,8 @@
pin_func |= SYS_PF_MUST_BE_SET | SYS_PF_PSC1_S1;
au_writel(pin_func, SYS_PINFUNC);
- au_writel(0, (u32)bcsr|0x10); /* turn off pcmcia power */
+ au_writel(0, (u32)bcsr | 0x10); /* turn off PCMCIA power */
au_sync();
- printk("AMD Alchemy Pb1550 Board\n");
+ printk(KERN_INFO "AMD Alchemy Pb1550 Board\n");
}
diff --git a/arch/mips/au1000/pb1550/init.c b/arch/mips/au1000/pb1550/init.c
index f6b2fc5..1b5f584 100644
--- a/arch/mips/au1000/pb1550/init.c
+++ b/arch/mips/au1000/pb1550/init.c
@@ -1,11 +1,10 @@
/*
*
* BRIEF MODULE DESCRIPTION
- * PB1550 board setup
+ * Pb1550 board setup
*
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2001, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -45,16 +44,15 @@
unsigned char *memsize_str;
unsigned long memsize;
- prom_argc = (int) fw_arg0;
- prom_argv = (char **) fw_arg1;
- prom_envp = (char **) fw_arg2;
+ prom_argc = (int)fw_arg0;
+ prom_argv = (char **)fw_arg1;
+ prom_envp = (char **)fw_arg2;
prom_init_cmdline();
memsize_str = prom_getenv("memsize");
- if (!memsize_str) {
+ if (!memsize_str)
memsize = 0x08000000;
- } else {
- memsize = simple_strtol(memsize_str, NULL, 0);
- }
+ else
+ memsize = strict_strtol(memsize_str, 0, NULL);
add_memory_region(0, memsize, BOOT_MEM_RAM);
}
diff --git a/arch/mips/au1000/pb1550/irqmap.c b/arch/mips/au1000/pb1550/irqmap.c
index e1dac37..a02a4d1 100644
--- a/arch/mips/au1000/pb1550/irqmap.c
+++ b/arch/mips/au1000/pb1550/irqmap.c
@@ -1,6 +1,6 @@
/*
* BRIEF MODULE DESCRIPTION
- * Au1xxx irq map table
+ * Au1xx0 IRQ map table
*
* Copyright 2003 Embedded Edge, LLC
* dan@embeddededge.com
@@ -31,8 +31,8 @@
#include <asm/mach-au1x00/au1000.h>
char irq_tab_alchemy[][5] __initdata = {
- [12] = { -1, INTB, INTC, INTD, INTA}, /* IDSEL 12 - PCI slot 2 (left) */
- [13] = { -1, INTA, INTB, INTC, INTD}, /* IDSEL 13 - PCI slot 1 (right) */
+ [12] = { -1, INTB, INTC, INTD, INTA }, /* IDSEL 12 - PCI slot 2 (left) */
+ [13] = { -1, INTA, INTB, INTC, INTD }, /* IDSEL 13 - PCI slot 1 (right) */
};
struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
diff --git a/arch/mips/au1000/xxs1500/Makefile b/arch/mips/au1000/xxs1500/Makefile
index 44d7f70..db3c526 100644
--- a/arch/mips/au1000/xxs1500/Makefile
+++ b/arch/mips/au1000/xxs1500/Makefile
@@ -1,7 +1,6 @@
#
# Copyright 2003 MontaVista Software Inc.
-# Author: MontaVista Software, Inc.
-# ppopov@mvista.com or source@mvista.com
+# Author: MontaVista Software, Inc. <source@mvista.com>
#
# Makefile for MyCable XXS1500 board.
#
diff --git a/arch/mips/au1000/xxs1500/board_setup.c b/arch/mips/au1000/xxs1500/board_setup.c
index 79d1798..4c587ac 100644
--- a/arch/mips/au1000/xxs1500/board_setup.c
+++ b/arch/mips/au1000/xxs1500/board_setup.c
@@ -1,7 +1,6 @@
/*
- * Copyright 2000-2003 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2000-2003, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -39,40 +38,40 @@
{
u32 pin_func;
- // set multiple use pins (UART3/GPIO) to UART (it's used as UART too)
- pin_func = au_readl(SYS_PINFUNC) & (u32)(~SYS_PF_UR3);
+ /* Set multiple use pins (UART3/GPIO) to UART (it's used as UART too) */
+ pin_func = au_readl(SYS_PINFUNC) & ~SYS_PF_UR3;
pin_func |= SYS_PF_UR3;
au_writel(pin_func, SYS_PINFUNC);
- // enable UART
- au_writel(0x01, UART3_ADDR+UART_MOD_CNTRL); // clock enable (CE)
+ /* Enable UART */
+ au_writel(0x01, UART3_ADDR + UART_MOD_CNTRL); /* clock enable (CE) */
mdelay(10);
- au_writel(0x03, UART3_ADDR+UART_MOD_CNTRL); // CE and "enable"
+ au_writel(0x03, UART3_ADDR + UART_MOD_CNTRL); /* CE and "enable" */
mdelay(10);
- // enable DTR = USB power up
- au_writel(0x01, UART3_ADDR+UART_MCR); //? UART_MCR_DTR is 0x01???
+ /* Enable DTR = USB power up */
+ au_writel(0x01, UART3_ADDR + UART_MCR); /* UART_MCR_DTR is 0x01??? */
#ifdef CONFIG_PCMCIA_XXS1500
- /* setup pcmcia signals */
+ /* Setup PCMCIA signals */
au_writel(0, SYS_PININPUTEN);
- /* gpio 0, 1, and 4 are inputs */
- au_writel(1 | (1<<1) | (1<<4), SYS_TRIOUTCLR);
+ /* GPIO 0, 1, and 4 are inputs */
+ au_writel(1 | (1 << 1) | (1 << 4), SYS_TRIOUTCLR);
- /* enable GPIO2 if not already enabled */
+ /* Enable GPIO2 if not already enabled */
au_writel(1, GPIO2_ENABLE);
- /* gpio2 208/9/10/11 are inputs */
- au_writel((1<<8) | (1<<9) | (1<<10) | (1<<11), GPIO2_DIR);
+ /* GPIO2 208/9/10/11 are inputs */
+ au_writel((1 << 8) | (1 << 9) | (1 << 10) | (1 << 11), GPIO2_DIR);
- /* turn off power */
- au_writel((au_readl(GPIO2_PINSTATE) & ~(1<<14))|(1<<30), GPIO2_OUTPUT);
+ /* Turn off power */
+ au_writel((au_readl(GPIO2_PINSTATE) & ~(1 << 14)) | (1 << 30),
+ GPIO2_OUTPUT);
#endif
-
#ifdef CONFIG_PCI
#if defined(__MIPSEB__)
- au_writel(0xf | (2<<6) | (1<<4), Au1500_PCI_CFG);
+ au_writel(0xf | (2 << 6) | (1 << 4), Au1500_PCI_CFG);
#else
au_writel(0xf, Au1500_PCI_CFG);
#endif
diff --git a/arch/mips/au1000/xxs1500/init.c b/arch/mips/au1000/xxs1500/init.c
index 24fc6e1..b849bf5 100644
--- a/arch/mips/au1000/xxs1500/init.c
+++ b/arch/mips/au1000/xxs1500/init.c
@@ -2,9 +2,8 @@
* BRIEF MODULE DESCRIPTION
* XXS1500 board setup
*
- * Copyright 2003 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2003, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -45,8 +44,8 @@
unsigned long memsize;
prom_argc = fw_arg0;
- prom_argv = (char **) fw_arg1;
- prom_envp = (char **) fw_arg2;
+ prom_argv = (char **)fw_arg1;
+ prom_envp = (char **)fw_arg2;
prom_init_cmdline();
@@ -54,6 +53,6 @@
if (!memsize_str)
memsize = 0x04000000;
else
- memsize = simple_strtol(memsize_str, NULL, 0);
+ memsize = strict_strtol(memsize_str, 0, NULL);
add_memory_region(0, memsize, BOOT_MEM_RAM);
}
diff --git a/arch/mips/au1000/xxs1500/irqmap.c b/arch/mips/au1000/xxs1500/irqmap.c
index dd6e3d1..edf06ed 100644
--- a/arch/mips/au1000/xxs1500/irqmap.c
+++ b/arch/mips/au1000/xxs1500/irqmap.c
@@ -31,7 +31,7 @@
#include <asm/mach-au1x00/au1000.h>
struct au1xxx_irqmap __initdata au1xxx_irq_map[] = {
- { AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0},
+ { AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0 },
{ AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_202, INTC_INT_LOW_LEVEL, 0 },
{ AU1500_GPIO_203, INTC_INT_LOW_LEVEL, 0 },
diff --git a/arch/mips/emma2rh/markeins/setup.c b/arch/mips/emma2rh/markeins/setup.c
index 82f9e901..62bfb45 100644
--- a/arch/mips/emma2rh/markeins/setup.c
+++ b/arch/mips/emma2rh/markeins/setup.c
@@ -76,7 +76,9 @@
while (1) ;
}
-static unsigned long clock[4] = { 166500000, 187312500, 199800000, 210600000 };
+static unsigned long __initdata emma2rh_clock[4] = {
+ 166500000, 187312500, 199800000, 210600000
+};
static unsigned int __init detect_bus_frequency(unsigned long rtc_base)
{
@@ -85,7 +87,8 @@
/* detect from boot strap */
reg = emma2rh_in32(EMMA2RH_BHIF_STRAP_0);
reg = (reg >> 4) & 0x3;
- return clock[reg];
+
+ return emma2rh_clock[reg];
}
void __init plat_time_init(void)
diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile
index 45545be..65e46a6 100644
--- a/arch/mips/kernel/Makefile
+++ b/arch/mips/kernel/Makefile
@@ -30,7 +30,6 @@
obj-$(CONFIG_CPU_MIPS32) += r4k_fpu.o r4k_switch.o
obj-$(CONFIG_CPU_MIPS64) += r4k_fpu.o r4k_switch.o
obj-$(CONFIG_CPU_R3000) += r2300_fpu.o r2300_switch.o
-obj-$(CONFIG_CPU_R4000) += r4k_fpu.o r4k_switch.o
obj-$(CONFIG_CPU_R4300) += r4k_fpu.o r4k_switch.o
obj-$(CONFIG_CPU_R4X00) += r4k_fpu.o r4k_switch.o
obj-$(CONFIG_CPU_R5000) += r4k_fpu.o r4k_switch.o
@@ -56,9 +55,9 @@
obj-$(CONFIG_MIPS_CMP) += smp-cmp.o
obj-$(CONFIG_CPU_MIPSR2) += spram.o
-obj-$(CONFIG_MIPS_APSP_KSPD) += kspd.o
obj-$(CONFIG_MIPS_VPE_LOADER) += vpe.o
obj-$(CONFIG_MIPS_VPE_APSP_API) += rtlx.o
+obj-$(CONFIG_MIPS_APSP_KSPD) += kspd.o
obj-$(CONFIG_I8259) += i8259.o
obj-$(CONFIG_IRQ_CPU) += irq_cpu.o
diff --git a/arch/mips/kernel/cpu-bugs64.c b/arch/mips/kernel/cpu-bugs64.c
index a1b48af..02b7713 100644
--- a/arch/mips/kernel/cpu-bugs64.c
+++ b/arch/mips/kernel/cpu-bugs64.c
@@ -38,7 +38,7 @@
".endr\n\t"
".set pop"
:
- : GCC_IMM_ASM(align), GCC_IMM_ASM(mod));
+ : GCC_IMM_ASM() (align), GCC_IMM_ASM() (mod));
}
static inline void mult_sh_align_mod(long *v1, long *v2, long *w,
diff --git a/arch/mips/kernel/init_task.c b/arch/mips/kernel/init_task.c
index aeda7f5..d72487a 100644
--- a/arch/mips/kernel/init_task.c
+++ b/arch/mips/kernel/init_task.c
@@ -10,7 +10,6 @@
#include <asm/pgtable.h>
static struct fs_struct init_fs = INIT_FS;
-static struct files_struct init_files = INIT_FILES;
static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
struct mm_struct init_mm = INIT_MM(init_mm);
diff --git a/arch/mips/kernel/irixelf.c b/arch/mips/kernel/irixelf.c
index 290d8e3..469c723 100644
--- a/arch/mips/kernel/irixelf.c
+++ b/arch/mips/kernel/irixelf.c
@@ -578,7 +578,7 @@
* process and the system, here we map the page and fill the
* structure
*/
-static void irix_map_prda_page(void)
+static int irix_map_prda_page(void)
{
unsigned long v;
struct prda *pp;
@@ -587,8 +587,8 @@
v = do_brk(PRDA_ADDRESS, PAGE_SIZE);
up_write(¤t->mm->mmap_sem);
- if (v < 0)
- return;
+ if (v != PRDA_ADDRESS)
+ return v; /* v must be an error code */
pp = (struct prda *) v;
pp->prda_sys.t_pid = task_pid_vnr(current);
@@ -596,6 +596,8 @@
pp->prda_sys.t_rpid = task_pid_vnr(current);
/* We leave the rest set to zero */
+
+ return 0;
}
@@ -781,7 +783,8 @@
* IRIX maps a page at 0x200000 which holds some system
* information. Programs depend on this.
*/
- irix_map_prda_page();
+ if (irix_map_prda_page())
+ goto out_free_dentry;
padzero(elf_bss);
diff --git a/arch/mips/kernel/kspd.c b/arch/mips/kernel/kspd.c
index ceb62dc..b0591ae 100644
--- a/arch/mips/kernel/kspd.c
+++ b/arch/mips/kernel/kspd.c
@@ -257,7 +257,7 @@
vcwd = vpe_getcwd(tclimit);
- /* change to the cwd of the process that loaded the SP program */
+ /* change to cwd of the process that loaded the SP program */
old_fs = get_fs();
set_fs(KERNEL_DS);
sys_chdir(vcwd);
@@ -323,6 +323,9 @@
set >>= 1;
}
}
+
+ /* Put daemon cwd back to root to avoid umount problems */
+ sys_chdir("/");
}
static int channel_open = 0;
diff --git a/arch/mips/kernel/rtlx.c b/arch/mips/kernel/rtlx.c
index 0233798..b88f1c1 100644
--- a/arch/mips/kernel/rtlx.c
+++ b/arch/mips/kernel/rtlx.c
@@ -72,6 +72,15 @@
static irqreturn_t rtlx_interrupt(int irq, void *dev_id)
{
int i;
+ unsigned int flags, vpeflags;
+
+ /* Ought not to be strictly necessary for SMTC builds */
+ local_irq_save(flags);
+ vpeflags = dvpe();
+ set_c0_status(0x100 << MIPS_CPU_RTLX_IRQ);
+ irq_enable_hazard();
+ evpe(vpeflags);
+ local_irq_restore(flags);
for (i = 0; i < RTLX_CHANNELS; i++) {
wake_up(&channel_wqs[i].lx_queue);
@@ -108,7 +117,8 @@
static int rtlx_init(struct rtlx_info *rtlxi)
{
if (rtlxi->id != RTLX_ID) {
- printk(KERN_ERR "no valid RTLX id at 0x%p 0x%lx\n", rtlxi, rtlxi->id);
+ printk(KERN_ERR "no valid RTLX id at 0x%p 0x%lx\n",
+ rtlxi, rtlxi->id);
return -ENOEXEC;
}
@@ -162,18 +172,17 @@
if (rtlx == NULL) {
if( (p = vpe_get_shared(tclimit)) == NULL) {
- if (can_sleep) {
- __wait_event_interruptible(channel_wqs[index].lx_queue,
- (p = vpe_get_shared(tclimit)),
- ret);
- if (ret)
- goto out_fail;
- } else {
- printk(KERN_DEBUG "No SP program loaded, and device "
- "opened with O_NONBLOCK\n");
- ret = -ENOSYS;
+ if (can_sleep) {
+ __wait_event_interruptible(channel_wqs[index].lx_queue,
+ (p = vpe_get_shared(tclimit)), ret);
+ if (ret)
goto out_fail;
- }
+ } else {
+ printk(KERN_DEBUG "No SP program loaded, and device "
+ "opened with O_NONBLOCK\n");
+ ret = -ENOSYS;
+ goto out_fail;
+ }
}
smp_rmb();
@@ -182,7 +191,9 @@
DEFINE_WAIT(wait);
for (;;) {
- prepare_to_wait(&channel_wqs[index].lx_queue, &wait, TASK_INTERRUPTIBLE);
+ prepare_to_wait(
+ &channel_wqs[index].lx_queue,
+ &wait, TASK_INTERRUPTIBLE);
smp_rmb();
if (*p != NULL)
break;
@@ -195,7 +206,7 @@
}
finish_wait(&channel_wqs[index].lx_queue, &wait);
} else {
- printk(" *vpe_get_shared is NULL. "
+ pr_err(" *vpe_get_shared is NULL. "
"Has an SP program been loaded?\n");
ret = -ENOSYS;
goto out_fail;
@@ -203,8 +214,9 @@
}
if ((unsigned int)*p < KSEG0) {
- printk(KERN_WARNING "vpe_get_shared returned an invalid pointer "
- "maybe an error code %d\n", (int)*p);
+ printk(KERN_WARNING "vpe_get_shared returned an "
+ "invalid pointer maybe an error code %d\n",
+ (int)*p);
ret = -ENOSYS;
goto out_fail;
}
@@ -232,6 +244,10 @@
int rtlx_release(int index)
{
+ if (rtlx == NULL) {
+ pr_err("rtlx_release() with null rtlx\n");
+ return 0;
+ }
rtlx->channel[index].lx_state = RTLX_STATE_UNUSED;
return 0;
}
@@ -251,8 +267,8 @@
int ret = 0;
__wait_event_interruptible(channel_wqs[index].lx_queue,
- chan->lx_read != chan->lx_write || sp_stopping,
- ret);
+ (chan->lx_read != chan->lx_write) ||
+ sp_stopping, ret);
if (ret)
return ret;
@@ -282,7 +298,9 @@
unsigned int rtlx_write_poll(int index)
{
struct rtlx_channel *chan = &rtlx->channel[index];
- return write_spacefree(chan->rt_read, chan->rt_write, chan->buffer_size);
+
+ return write_spacefree(chan->rt_read, chan->rt_write,
+ chan->buffer_size);
}
ssize_t rtlx_read(int index, void __user *buff, size_t count)
@@ -344,8 +362,8 @@
rt_read = rt->rt_read;
/* total number of bytes to copy */
- count = min(count,
- (size_t)write_spacefree(rt_read, rt->rt_write, rt->buffer_size));
+ count = min(count, (size_t)write_spacefree(rt_read, rt->rt_write,
+ rt->buffer_size));
/* first bit from write pointer to the end of the buffer, or count */
fl = min(count, (size_t) rt->buffer_size - rt->rt_write);
@@ -514,6 +532,11 @@
if (cpu_has_vint)
set_vi_handler(MIPS_CPU_RTLX_IRQ, rtlx_dispatch);
+ else {
+ pr_err("APRP RTLX init on non-vectored-interrupt processor\n");
+ err = -ENODEV;
+ goto out_chrdev;
+ }
rtlx_irq.dev_id = rtlx;
setup_irq(rtlx_irq_num, &rtlx_irq);
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index 39f3dfe..c6a063b 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -331,6 +331,7 @@
/*
* Determine low and high memory ranges
*/
+ max_pfn = max_low_pfn;
if (max_low_pfn > PFN_DOWN(HIGHMEM_START)) {
#ifdef CONFIG_HIGHMEM
highstart_pfn = PFN_DOWN(HIGHMEM_START);
diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c
index 33780cc..63370cd 100644
--- a/arch/mips/kernel/smp.c
+++ b/arch/mips/kernel/smp.c
@@ -87,8 +87,8 @@
__cpuinit void register_smp_ops(struct plat_smp_ops *ops)
{
- if (ops)
- printk(KERN_WARNING "Overriding previous set SMP ops\n");
+ if (mp_ops)
+ printk(KERN_WARNING "Overriding previously set SMP ops\n");
mp_ops = ops;
}
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index cb8b0e2..f9165d1 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -88,15 +88,17 @@
#ifdef CONFIG_KALLSYMS
printk("\n");
#endif
-#define IS_KVA01(a) ((((unsigned int)a) & 0xc0000000) == 0x80000000)
- if (IS_KVA01(sp)) {
- while (!kstack_end(sp)) {
- addr = *sp++;
- if (__kernel_text_address(addr))
- print_ip_sym(addr);
+ while (!kstack_end(sp)) {
+ unsigned long __user *p =
+ (unsigned long __user *)(unsigned long)sp++;
+ if (__get_user(addr, p)) {
+ printk(" (Bad stack address)");
+ break;
}
- printk("\n");
+ if (__kernel_text_address(addr))
+ print_ip_sym(addr);
}
+ printk("\n");
}
#ifdef CONFIG_KALLSYMS
diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c
index 39804c5..2794501 100644
--- a/arch/mips/kernel/vpe.c
+++ b/arch/mips/kernel/vpe.c
@@ -269,7 +269,7 @@
* This means you must tell Linux to use less memory than you
* physically have, for example by passing a mem= boot argument.
*/
- addr = pfn_to_kaddr(max_pfn);
+ addr = pfn_to_kaddr(max_low_pfn);
memset(addr, 0, len);
#else
/* simple grab some mem for now */
@@ -781,10 +781,15 @@
/* take system out of configuration state */
clear_c0_mvpcontrol(MVPCONTROL_VPC);
+ /*
+ * SMTC/SMVP kernels manage VPE enable independently,
+ * but uniprocessor kernels need to turn it on, even
+ * if that wasn't the pre-dvpe() state.
+ */
#ifdef CONFIG_SMP
- evpe(EVPE_ENABLE);
-#else
evpe(vpeflags);
+#else
+ evpe(EVPE_ENABLE);
#endif
emt(dmt_flag);
local_irq_restore(flags);
@@ -840,7 +845,7 @@
/* Sanity checks against insmoding binaries or wrong arch,
weird elf version */
- if (memcmp(hdr->e_ident, ELFMAG, 4) != 0
+ if (memcmp(hdr->e_ident, ELFMAG, SELFMAG) != 0
|| (hdr->e_type != ET_REL && hdr->e_type != ET_EXEC)
|| !elf_check_arch(hdr)
|| hdr->e_shentsize != sizeof(*sechdrs)) {
@@ -947,12 +952,14 @@
struct elf_phdr *phdr = (struct elf_phdr *) ((char *)hdr + hdr->e_phoff);
for (i = 0; i < hdr->e_phnum; i++) {
- if (phdr->p_type != PT_LOAD)
- continue;
-
- memcpy((void *)phdr->p_paddr, (char *)hdr + phdr->p_offset, phdr->p_filesz);
- memset((void *)phdr->p_paddr + phdr->p_filesz, 0, phdr->p_memsz - phdr->p_filesz);
- phdr++;
+ if (phdr->p_type == PT_LOAD) {
+ memcpy((void *)phdr->p_paddr,
+ (char *)hdr + phdr->p_offset,
+ phdr->p_filesz);
+ memset((void *)phdr->p_paddr + phdr->p_filesz,
+ 0, phdr->p_memsz - phdr->p_filesz);
+ }
+ phdr++;
}
for (i = 0; i < hdr->e_shnum; i++) {
@@ -1107,7 +1114,7 @@
return -ENODEV;
hdr = (Elf_Ehdr *) v->pbuffer;
- if (memcmp(hdr->e_ident, ELFMAG, 4) == 0) {
+ if (memcmp(hdr->e_ident, ELFMAG, SELFMAG) == 0) {
if (vpe_elfload(v) >= 0) {
vpe_run(v);
} else {
diff --git a/arch/mips/mips-boards/generic/time.c b/arch/mips/mips-boards/generic/time.c
index 008fd82..fe2cac1 100644
--- a/arch/mips/mips-boards/generic/time.c
+++ b/arch/mips/mips-boards/generic/time.c
@@ -58,27 +58,8 @@
static int mips_cpu_perf_irq;
extern int cp0_perfcount_irq;
-DEFINE_PER_CPU(unsigned int, tickcount);
-#define tickcount_this_cpu __get_cpu_var(tickcount)
-static unsigned long ledbitmask;
-
static void mips_timer_dispatch(void)
{
-#if defined(CONFIG_MIPS_MALTA) || defined(CONFIG_MIPS_ATLAS)
- /*
- * Yes, this is very tacky, won't work as expected with SMTC and
- * dyntick will break it,
- * but it gives me a nice warm feeling during debug
- */
-#define LEDBAR 0xbf000408
- if (tickcount_this_cpu++ >= HZ) {
- tickcount_this_cpu = 0;
- change_bit(smp_processor_id(), &ledbitmask);
- smp_wmb(); /* Make sure every one else sees the change */
- /* This will pick up any recent changes made by other CPU's */
- *(unsigned int *)LEDBAR = ledbitmask;
- }
-#endif
do_IRQ(mips_cpu_timer_irq);
}
diff --git a/arch/mips/mm/highmem.c b/arch/mips/mm/highmem.c
index 10dd2af..8f2cd8e 100644
--- a/arch/mips/mm/highmem.c
+++ b/arch/mips/mm/highmem.c
@@ -116,4 +116,3 @@
EXPORT_SYMBOL(__kunmap);
EXPORT_SYMBOL(__kmap_atomic);
EXPORT_SYMBOL(__kunmap_atomic);
-EXPORT_SYMBOL(__kmap_atomic_to_page);
diff --git a/arch/mips/mm/page.c b/arch/mips/mm/page.c
index d827d61..cab81f4 100644
--- a/arch/mips/mm/page.c
+++ b/arch/mips/mm/page.c
@@ -310,8 +310,8 @@
if (R4600_V2_HIT_CACHEOP_WAR && cpu_is_r4600_v2_x())
uasm_i_lui(&buf, AT, 0xa000);
- off = min(8, pref_bias_clear_store / cache_line_size) *
- cache_line_size;
+ off = cache_line_size ? min(8, pref_bias_clear_store / cache_line_size)
+ * cache_line_size : 0;
while (off) {
build_clear_pref(&buf, -off);
off -= cache_line_size;
@@ -454,12 +454,14 @@
if (R4600_V2_HIT_CACHEOP_WAR && cpu_is_r4600_v2_x())
uasm_i_lui(&buf, AT, 0xa000);
- off = min(8, pref_bias_copy_load / cache_line_size) * cache_line_size;
+ off = cache_line_size ? min(8, pref_bias_copy_load / cache_line_size) *
+ cache_line_size : 0;
while (off) {
build_copy_load_pref(&buf, -off);
off -= cache_line_size;
}
- off = min(8, pref_bias_copy_store / cache_line_size) * cache_line_size;
+ off = cache_line_size ? min(8, pref_bias_copy_load / cache_line_size) *
+ cache_line_size : 0;
while (off) {
build_copy_store_pref(&buf, -off);
off -= cache_line_size;
diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c
index 382738c..76da73a 100644
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -224,8 +224,9 @@
static void __cpuinit __maybe_unused build_tlb_probe_entry(u32 **p)
{
switch (current_cpu_type()) {
- /* Found by experiment: R4600 v2.0 needs this, too. */
+ /* Found by experiment: R4600 v2.0/R4700 needs this, too. */
case CPU_R4600:
+ case CPU_R4700:
case CPU_R5000:
case CPU_R5000A:
case CPU_NEVADA:
diff --git a/arch/mips/oprofile/op_model_mipsxx.c b/arch/mips/oprofile/op_model_mipsxx.c
index da8cbb6..b40df7d 100644
--- a/arch/mips/oprofile/op_model_mipsxx.c
+++ b/arch/mips/oprofile/op_model_mipsxx.c
@@ -281,7 +281,7 @@
static void reset_counters(void *arg)
{
- int counters = (int)arg;
+ int counters = (int)(long)arg;
switch (counters) {
case 4:
w_c0_perfctrl3(0);
@@ -313,7 +313,7 @@
if (!cpu_has_mipsmt_pertccounters)
counters = counters_total_to_per_cpu(counters);
#endif
- on_each_cpu(reset_counters, (void *)counters, 0, 1);
+ on_each_cpu(reset_counters, (void *)(long)counters, 0, 1);
op_model_mipsxx_ops.num_counters = counters;
switch (current_cpu_type()) {
@@ -382,7 +382,7 @@
int counters = op_model_mipsxx_ops.num_counters;
counters = counters_per_cpu_to_total(counters);
- on_each_cpu(reset_counters, (void *)counters, 0, 1);
+ on_each_cpu(reset_counters, (void *)(long)counters, 0, 1);
perf_irq = save_perf_irq;
}
diff --git a/arch/mips/pci/fixup-au1000.c b/arch/mips/pci/fixup-au1000.c
index 00c36c9..e2ddfc4 100644
--- a/arch/mips/pci/fixup-au1000.c
+++ b/arch/mips/pci/fixup-au1000.c
@@ -1,10 +1,9 @@
/*
* BRIEF MODULE DESCRIPTION
- * Board specific pci fixups.
+ * Board specific PCI fixups.
*
- * Copyright 2001-2003 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2001-2003, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
diff --git a/arch/mips/pci/ops-au1000.c b/arch/mips/pci/ops-au1000.c
index 1314bd5..9a57c5a 100644
--- a/arch/mips/pci/ops-au1000.c
+++ b/arch/mips/pci/ops-au1000.c
@@ -1,10 +1,9 @@
/*
* BRIEF MODULE DESCRIPTION
- * Alchemy/AMD Au1x00 PCI support.
+ * Alchemy/AMD Au1xx0 PCI support.
*
- * Copyright 2001-2003, 2007 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2001-2003, 2007-2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* Support for all devices (greater than 16) added by David Gathright.
*
@@ -28,6 +27,7 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/kernel.h>
@@ -36,9 +36,9 @@
#include <asm/mach-au1x00/au1000.h>
-#undef DEBUG
-#ifdef DEBUG
-#define DBG(x...) printk(x)
+#undef DEBUG
+#ifdef DEBUG
+#define DBG(x...) printk(KERN_DEBUG x)
#else
#define DBG(x...)
#endif
@@ -46,7 +46,6 @@
#define PCI_ACCESS_READ 0
#define PCI_ACCESS_WRITE 1
-
int (*board_pci_idsel)(unsigned int devsel, int assert);
void mod_wired_entry(int entry, unsigned long entrylo0,
@@ -92,10 +91,9 @@
}
static int config_access(unsigned char access_type, struct pci_bus *bus,
- unsigned int dev_fn, unsigned char where,
- u32 * data)
+ unsigned int dev_fn, unsigned char where, u32 *data)
{
-#if defined( CONFIG_SOC_AU1500 ) || defined( CONFIG_SOC_AU1550 )
+#if defined(CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1550)
unsigned int device = PCI_SLOT(dev_fn);
unsigned int function = PCI_FUNC(dev_fn);
unsigned long offset, status;
@@ -114,38 +112,36 @@
Au1500_PCI_STATCMD);
au_sync_udelay(1);
- /* Allow board vendors to implement their own off-chip idsel.
+ /*
+ * Allow board vendors to implement their own off-chip IDSEL.
* If it doesn't succeed, may as well bail out at this point.
*/
- if (board_pci_idsel) {
- if (board_pci_idsel(device, 1) == 0) {
- *data = 0xffffffff;
- local_irq_restore(flags);
- return -1;
- }
+ if (board_pci_idsel && board_pci_idsel(device, 1) == 0) {
+ *data = 0xffffffff;
+ local_irq_restore(flags);
+ return -1;
}
- /* setup the config window */
- if (bus->number == 0) {
- cfg_base = ((1<<device)<<11);
- } else {
- cfg_base = 0x80000000 | (bus->number<<16) | (device<<11);
- }
+ /* Setup the config window */
+ if (bus->number == 0)
+ cfg_base = (1 << device) << 11;
+ else
+ cfg_base = 0x80000000 | (bus->number << 16) | (device << 11);
- /* setup the lower bits of the 36 bit address */
- offset = (function << 8) | (where & ~0x3);
- /* pick up any address that falls below the page mask */
+ /* Setup the lower bits of the 36-bit address */
+ offset = (function << 8) | (where & ~0x3);
+ /* Pick up any address that falls below the page mask */
offset |= cfg_base & ~PAGE_MASK;
- /* page boundary */
+ /* Page boundary */
cfg_base = cfg_base & PAGE_MASK;
/*
* To improve performance, if the current device is the same as
* the last device accessed, we don't touch the TLB.
*/
- entryLo0 = (6 << 26) | (cfg_base >> 6) | (2 << 3) | 7;
- entryLo1 = (6 << 26) | (cfg_base >> 6) | (0x1000 >> 6) | (2 << 3) | 7;
+ entryLo0 = (6 << 26) | (cfg_base >> 6) | (2 << 3) | 7;
+ entryLo1 = (6 << 26) | (cfg_base >> 6) | (0x1000 >> 6) | (2 << 3) | 7;
if ((entryLo0 != last_entryLo0) || (entryLo1 != last_entryLo1)) {
mod_wired_entry(pci_cfg_wired_entry, entryLo0, entryLo1,
(unsigned long)pci_cfg_vm->addr, PM_4K);
@@ -153,38 +149,37 @@
last_entryLo1 = entryLo1;
}
- if (access_type == PCI_ACCESS_WRITE) {
+ if (access_type == PCI_ACCESS_WRITE)
au_writel(*data, (int)(pci_cfg_vm->addr + offset));
- } else {
+ else
*data = au_readl((int)(pci_cfg_vm->addr + offset));
- }
+
au_sync_udelay(2);
- DBG("cfg_access %d bus->number %d dev %d at %x *data %x conf %x\n",
- access_type, bus->number, device, where, *data, offset);
+ DBG("cfg_access %d bus->number %u dev %u at %x *data %x conf %lx\n",
+ access_type, bus->number, device, where, *data, offset);
- /* check master abort */
+ /* Check master abort */
status = au_readl(Au1500_PCI_STATCMD);
- if (status & (1<<29)) {
+ if (status & (1 << 29)) {
*data = 0xffffffff;
error = -1;
DBG("Au1x Master Abort\n");
} else if ((status >> 28) & 0xf) {
- DBG("PCI ERR detected: device %d, status %x\n", device, ((status >> 28) & 0xf));
+ DBG("PCI ERR detected: device %u, status %lx\n",
+ device, (status >> 28) & 0xf);
- /* clear errors */
+ /* Clear errors */
au_writel(status & 0xf000ffff, Au1500_PCI_STATCMD);
*data = 0xffffffff;
error = -1;
}
- /* Take away the idsel.
- */
- if (board_pci_idsel) {
+ /* Take away the IDSEL. */
+ if (board_pci_idsel)
(void)board_pci_idsel(device, 0);
- }
local_irq_restore(flags);
return error;
@@ -192,7 +187,7 @@
}
static int read_config_byte(struct pci_bus *bus, unsigned int devfn,
- int where, u8 * val)
+ int where, u8 *val)
{
u32 data;
int ret;
@@ -206,9 +201,8 @@
return ret;
}
-
static int read_config_word(struct pci_bus *bus, unsigned int devfn,
- int where, u16 * val)
+ int where, u16 *val)
{
u32 data;
int ret;
@@ -221,7 +215,7 @@
}
static int read_config_dword(struct pci_bus *bus, unsigned int devfn,
- int where, u32 * val)
+ int where, u32 *val)
{
int ret;
@@ -229,9 +223,8 @@
return ret;
}
-static int
-write_config_byte(struct pci_bus *bus, unsigned int devfn, int where,
- u8 val)
+static int write_config_byte(struct pci_bus *bus, unsigned int devfn,
+ int where, u8 val)
{
u32 data = 0;
@@ -239,7 +232,7 @@
return -1;
data = (data & ~(0xff << ((where & 3) << 3))) |
- (val << ((where & 3) << 3));
+ (val << ((where & 3) << 3));
if (config_access(PCI_ACCESS_WRITE, bus, devfn, where, &data))
return -1;
@@ -247,9 +240,8 @@
return PCIBIOS_SUCCESSFUL;
}
-static int
-write_config_word(struct pci_bus *bus, unsigned int devfn, int where,
- u16 val)
+static int write_config_word(struct pci_bus *bus, unsigned int devfn,
+ int where, u16 val)
{
u32 data = 0;
@@ -257,18 +249,16 @@
return -1;
data = (data & ~(0xffff << ((where & 3) << 3))) |
- (val << ((where & 3) << 3));
+ (val << ((where & 3) << 3));
if (config_access(PCI_ACCESS_WRITE, bus, devfn, where, &data))
return -1;
-
return PCIBIOS_SUCCESSFUL;
}
-static int
-write_config_dword(struct pci_bus *bus, unsigned int devfn, int where,
- u32 val)
+static int write_config_dword(struct pci_bus *bus, unsigned int devfn,
+ int where, u32 val)
{
if (config_access(PCI_ACCESS_WRITE, bus, devfn, where, &val))
return -1;
@@ -277,18 +267,20 @@
}
static int config_read(struct pci_bus *bus, unsigned int devfn,
- int where, int size, u32 * val)
+ int where, int size, u32 *val)
{
switch (size) {
case 1: {
u8 _val;
int rc = read_config_byte(bus, devfn, where, &_val);
+
*val = _val;
return rc;
}
- case 2: {
+ case 2: {
u16 _val;
int rc = read_config_word(bus, devfn, where, &_val);
+
*val = _val;
return rc;
}
@@ -310,7 +302,6 @@
}
}
-
struct pci_ops au1x_pci_ops = {
config_read,
config_write
diff --git a/arch/mips/pci/ops-bridge.c b/arch/mips/pci/ops-bridge.c
index 1fa0992..b46b3e2 100644
--- a/arch/mips/pci/ops-bridge.c
+++ b/arch/mips/pci/ops-bridge.c
@@ -14,6 +14,22 @@
#include <asm/sn/sn0/hub.h>
/*
+ * Most of the IOC3 PCI config register aren't present
+ * we emulate what is needed for a normal PCI enumeration
+ */
+static u32 emulate_ioc3_cfg(int where, int size)
+{
+ if (size == 1 && where == 0x3d)
+ return 0x01;
+ else if (size == 2 && where == 0x3c)
+ return 0x0100;
+ else if (size == 4 && where == 0x3c)
+ return 0x00000100;
+
+ return 0;
+}
+
+/*
* The Bridge ASIC supports both type 0 and type 1 access. Type 1 is
* not really documented, so right now I can't write code which uses it.
* Therefore we use type 0 accesses for now even though they won't work
@@ -64,7 +80,7 @@
* generic PCI code a chance to look at the wrong register.
*/
if ((where >= 0x14 && where < 0x40) || (where >= 0x48)) {
- *value = 0;
+ *value = emulate_ioc3_cfg(where, size);
return PCIBIOS_SUCCESSFUL;
}
@@ -127,7 +143,7 @@
* generic PCI code a chance to look at the wrong register.
*/
if ((where >= 0x14 && where < 0x40) || (where >= 0x48)) {
- *value = 0;
+ *value = emulate_ioc3_cfg(where, size);
return PCIBIOS_SUCCESSFUL;
}
diff --git a/arch/mips/pci/pci-ip27.c b/arch/mips/pci/pci-ip27.c
index bb64828..a185169 100644
--- a/arch/mips/pci/pci-ip27.c
+++ b/arch/mips/pci/pci-ip27.c
@@ -47,6 +47,9 @@
static int num_bridges = 0;
bridge_t *bridge;
int slot;
+ extern int pci_probe_only;
+
+ pci_probe_only = 1;
printk("a bridge\n");
@@ -100,6 +103,11 @@
*/
bridge->b_wid_control |= BRIDGE_CTRL_IO_SWAP |
BRIDGE_CTRL_MEM_SWAP;
+#ifdef CONFIG_PAGE_SIZE_4KB
+ bridge->b_wid_control &= ~BRIDGE_CTRL_PAGE_SIZE;
+#else /* 16kB or larger */
+ bridge->b_wid_control |= BRIDGE_CTRL_PAGE_SIZE;
+#endif
/*
* Hmm... IRIX sets additional bits in the address which
diff --git a/arch/mips/pmc-sierra/msp71xx/msp_hwbutton.c b/arch/mips/pmc-sierra/msp71xx/msp_hwbutton.c
index ab96a2d..11769b5 100644
--- a/arch/mips/pmc-sierra/msp71xx/msp_hwbutton.c
+++ b/arch/mips/pmc-sierra/msp71xx/msp_hwbutton.c
@@ -126,9 +126,6 @@
struct hwbutton_interrupt *hirq = data;
unsigned long cic_ext = *CIC_EXT_CFG_REG;
- if (irq != hirq->irq)
- return IRQ_NONE;
-
if (CIC_EXT_IS_ACTIVE_HI(cic_ext, hirq->eirq)) {
/* Interrupt: pin is now HI */
CIC_EXT_SET_ACTIVE_LO(cic_ext, hirq->eirq);
@@ -164,7 +161,7 @@
*CIC_EXT_CFG_REG = cic_ext;
return request_irq(hirq->irq, hwbutton_handler, IRQF_DISABLED,
- hirq->name, (void *)hirq);
+ hirq->name, hirq);
}
static int __init msp_hwbutton_setup(void)
diff --git a/arch/mips/sgi-ip27/ip27-init.c b/arch/mips/sgi-ip27/ip27-init.c
index 7093e7c..4a500e8 100644
--- a/arch/mips/sgi-ip27/ip27-init.c
+++ b/arch/mips/sgi-ip27/ip27-init.c
@@ -161,27 +161,6 @@
return NASID_TO_COMPACT_NODEID(get_nasid());
}
-/* Extracted from the IOC3 meta driver. FIXME. */
-static inline void ioc3_sio_init(void)
-{
- struct ioc3 *ioc3;
- nasid_t nid;
- long loops;
-
- nid = get_nasid();
- ioc3 = (struct ioc3 *) KL_CONFIG_CH_CONS_INFO(nid)->memory_base;
-
- ioc3->sscr_a = 0; /* PIO mode for uarta. */
- ioc3->sscr_b = 0; /* PIO mode for uartb. */
- ioc3->sio_iec = ~0;
- ioc3->sio_ies = (SIO_IR_SA_INT | SIO_IR_SB_INT);
-
- loops=1000000; while(loops--);
- ioc3->sregs.uarta.iu_fcr = 0;
- ioc3->sregs.uartb.iu_fcr = 0;
- loops=1000000; while(loops--);
-}
-
static inline void ioc3_eth_init(void)
{
struct ioc3 *ioc3;
@@ -234,7 +213,6 @@
panic("Kernel compiled for N mode.");
#endif
- ioc3_sio_init();
ioc3_eth_init();
per_cpu_init();
diff --git a/arch/mips/sgi-ip27/ip27-memory.c b/arch/mips/sgi-ip27/ip27-memory.c
index bf438d0..42cd109 100644
--- a/arch/mips/sgi-ip27/ip27-memory.c
+++ b/arch/mips/sgi-ip27/ip27-memory.c
@@ -33,10 +33,6 @@
#define SLOT_PFNSHIFT (SLOT_SHIFT - PAGE_SHIFT)
#define PFN_NASIDSHFT (NASID_SHFT - PAGE_SHIFT)
-#define SLOT_IGNORED 0xffff
-
-static short __initdata slot_lastfilled_cache[MAX_COMPACT_NODES];
-static unsigned short __initdata slot_psize_cache[MAX_COMPACT_NODES][MAX_MEM_SLOTS];
static struct bootmem_data __initdata plat_node_bdata[MAX_COMPACT_NODES];
struct node_data *__node_data[MAX_COMPACT_NODES];
@@ -267,51 +263,6 @@
return ((pfn_t)nasid << PFN_NASIDSHFT) | (slot << SLOT_PFNSHIFT);
}
-/*
- * Return the number of pages of memory provided by the given slot
- * on the specified node.
- */
-static pfn_t __init slot_getsize(cnodeid_t node, int slot)
-{
- return (pfn_t) slot_psize_cache[node][slot];
-}
-
-/*
- * Return highest slot filled
- */
-static int __init node_getlastslot(cnodeid_t node)
-{
- return (int) slot_lastfilled_cache[node];
-}
-
-/*
- * Return the pfn of the last free page of memory on a node.
- */
-static pfn_t __init node_getmaxclick(cnodeid_t node)
-{
- pfn_t slot_psize;
- int slot;
-
- /*
- * Start at the top slot. When we find a slot with memory in it,
- * that's the winner.
- */
- for (slot = (MAX_MEM_SLOTS - 1); slot >= 0; slot--) {
- if ((slot_psize = slot_getsize(node, slot))) {
- if (slot_psize == SLOT_IGNORED)
- continue;
- /* Return the basepfn + the slot size, minus 1. */
- return slot_getbasepfn(node, slot) + slot_psize - 1;
- }
- }
-
- /*
- * If there's no memory on the node, return 0. This is likely
- * to cause problems.
- */
- return 0;
-}
-
static pfn_t __init slot_psize_compute(cnodeid_t node, int slot)
{
nasid_t nasid;
@@ -404,13 +355,13 @@
static void __init szmem(void)
{
pfn_t slot_psize, slot0sz = 0, nodebytes; /* Hack to detect problem configs */
- int slot, ignore;
+ int slot;
cnodeid_t node;
num_physpages = 0;
for_each_online_node(node) {
- ignore = nodebytes = 0;
+ nodebytes = 0;
for (slot = 0; slot < MAX_MEM_SLOTS; slot++) {
slot_psize = slot_psize_compute(node, slot);
if (slot == 0)
@@ -420,21 +371,20 @@
* kernel text.
*/
nodebytes += (1LL << SLOT_SHIFT);
+
+ if (!slot_psize)
+ continue;
+
if ((nodebytes >> PAGE_SHIFT) * (sizeof(struct page)) >
- (slot0sz << PAGE_SHIFT))
- ignore = 1;
- if (ignore && slot_psize) {
+ (slot0sz << PAGE_SHIFT)) {
printk("Ignoring slot %d onwards on node %d\n",
slot, node);
- slot_psize_cache[node][slot] = SLOT_IGNORED;
slot = MAX_MEM_SLOTS;
continue;
}
num_physpages += slot_psize;
- slot_psize_cache[node][slot] =
- (unsigned short) slot_psize;
- if (slot_psize)
- slot_lastfilled_cache[node] = slot;
+ add_active_range(node, slot_getbasepfn(node, slot),
+ slot_getbasepfn(node, slot) + slot_psize);
}
}
}
@@ -442,18 +392,20 @@
static void __init node_mem_init(cnodeid_t node)
{
pfn_t slot_firstpfn = slot_getbasepfn(node, 0);
- pfn_t slot_lastpfn = slot_firstpfn + slot_getsize(node, 0);
pfn_t slot_freepfn = node_getfirstfree(node);
- struct pglist_data *pd;
unsigned long bootmap_size;
+ pfn_t start_pfn, end_pfn;
+
+ get_pfn_range_for_nid(node, &start_pfn, &end_pfn);
/*
* Allocate the node data structures on the node first.
*/
__node_data[node] = __va(slot_freepfn << PAGE_SHIFT);
- pd = NODE_DATA(node);
- pd->bdata = &plat_node_bdata[node];
+ NODE_DATA(node)->bdata = &plat_node_bdata[node];
+ NODE_DATA(node)->node_start_pfn = start_pfn;
+ NODE_DATA(node)->node_spanned_pages = end_pfn - start_pfn;
cpus_clear(hub_data(node)->h_cpus);
@@ -461,12 +413,12 @@
sizeof(struct hub_data));
bootmap_size = init_bootmem_node(NODE_DATA(node), slot_freepfn,
- slot_firstpfn, slot_lastpfn);
- free_bootmem_node(NODE_DATA(node), slot_firstpfn << PAGE_SHIFT,
- (slot_lastpfn - slot_firstpfn) << PAGE_SHIFT);
+ start_pfn, end_pfn);
+ free_bootmem_with_active_regions(node, end_pfn);
reserve_bootmem_node(NODE_DATA(node), slot_firstpfn << PAGE_SHIFT,
((slot_freepfn - slot_firstpfn) << PAGE_SHIFT) + bootmap_size,
BOOTMEM_DEFAULT);
+ sparse_memory_present_with_active_regions(node);
}
/*
@@ -515,16 +467,15 @@
pagetable_init();
for_each_online_node(node) {
- pfn_t start_pfn = slot_getbasepfn(node, 0);
- pfn_t end_pfn = node_getmaxclick(node) + 1;
+ pfn_t start_pfn, end_pfn;
- zones_size[ZONE_NORMAL] = end_pfn - start_pfn;
- free_area_init_node(node, NODE_DATA(node),
- zones_size, start_pfn, NULL);
+ get_pfn_range_for_nid(node, &start_pfn, &end_pfn);
if (end_pfn > max_low_pfn)
max_low_pfn = end_pfn;
}
+ zones_size[ZONE_NORMAL] = max_low_pfn;
+ free_area_init_nodes(zones_size);
}
void __init mem_init(void)
@@ -535,34 +486,10 @@
high_memory = (void *) __va(num_physpages << PAGE_SHIFT);
for_each_online_node(node) {
- unsigned slot, numslots;
- struct page *end, *p;
-
/*
* This will free up the bootmem, ie, slot 0 memory.
*/
totalram_pages += free_all_bootmem_node(NODE_DATA(node));
-
- /*
- * We need to manually do the other slots.
- */
- numslots = node_getlastslot(node);
- for (slot = 1; slot <= numslots; slot++) {
- p = nid_page_nr(node, slot_getbasepfn(node, slot) -
- slot_getbasepfn(node, 0));
-
- /*
- * Free valid memory in current slot.
- */
- for (end = p + slot_getsize(node, slot); p < end; p++) {
- /* if (!page_is_ram(pgnr)) continue; */
- /* commented out until page_is_ram works */
- ClearPageReserved(p);
- init_page_count(p);
- __free_page(p);
- totalram_pages++;
- }
- }
}
totalram_pages -= setup_zero_pages(); /* This comes from node 0 */
diff --git a/arch/mips/sgi-ip27/ip27-smp.c b/arch/mips/sgi-ip27/ip27-smp.c
index f15fc93..ba5cdeb 100644
--- a/arch/mips/sgi-ip27/ip27-smp.c
+++ b/arch/mips/sgi-ip27/ip27-smp.c
@@ -176,11 +176,14 @@
static void __cpuinit ip27_init_secondary(void)
{
per_cpu_init();
- local_irq_enable();
}
static void __cpuinit ip27_smp_finish(void)
{
+ extern void hub_rt_clock_event_init(void);
+
+ hub_rt_clock_event_init();
+ local_irq_enable();
}
static void __init ip27_cpus_done(void)
diff --git a/arch/mips/sgi-ip27/ip27-timer.c b/arch/mips/sgi-ip27/ip27-timer.c
index 25d3baf..8b4e854 100644
--- a/arch/mips/sgi-ip27/ip27-timer.c
+++ b/arch/mips/sgi-ip27/ip27-timer.c
@@ -158,12 +158,15 @@
}
}
-unsigned int rt_timer_irq;
+int rt_timer_irq;
+
+static DEFINE_PER_CPU(struct clock_event_device, hub_rt_clockevent);
+static DEFINE_PER_CPU(char [11], hub_rt_name);
static irqreturn_t hub_rt_counter_handler(int irq, void *dev_id)
{
- struct clock_event_device *cd = dev_id;
unsigned int cpu = smp_processor_id();
+ struct clock_event_device *cd = &per_cpu(hub_rt_clockevent, cpu);
int slice = cputoslice(cpu);
/*
@@ -192,10 +195,7 @@
#define NSEC_PER_CYCLE 800
#define CYCLES_PER_SEC (NSEC_PER_SEC / NSEC_PER_CYCLE)
-static DEFINE_PER_CPU(struct clock_event_device, hub_rt_clockevent);
-static DEFINE_PER_CPU(char [11], hub_rt_name);
-
-static void __cpuinit hub_rt_clock_event_init(void)
+void __cpuinit hub_rt_clock_event_init(void)
{
unsigned int cpu = smp_processor_id();
struct clock_event_device *cd = &per_cpu(hub_rt_clockevent, cpu);
@@ -203,23 +203,22 @@
int irq = rt_timer_irq;
sprintf(name, "hub-rt %d", cpu);
- cd->name = "HUB-RT",
- cd->features = CLOCK_EVT_FEAT_ONESHOT,
+ cd->name = name;
+ cd->features = CLOCK_EVT_FEAT_ONESHOT;
clockevent_set_clock(cd, CYCLES_PER_SEC);
cd->max_delta_ns = clockevent_delta2ns(0xfffffffffffff, cd);
cd->min_delta_ns = clockevent_delta2ns(0x300, cd);
- cd->rating = 200,
- cd->irq = irq,
- cd->cpumask = cpumask_of_cpu(cpu),
- cd->rating = 300,
- cd->set_next_event = rt_next_event,
- cd->set_mode = rt_set_mode,
+ cd->rating = 200;
+ cd->irq = irq;
+ cd->cpumask = cpumask_of_cpu(cpu);
+ cd->set_next_event = rt_next_event;
+ cd->set_mode = rt_set_mode;
clockevents_register_device(cd);
}
static void __init hub_rt_clock_event_global_init(void)
{
- unsigned int irq;
+ int irq;
do {
smp_wmb();
@@ -261,6 +260,7 @@
{
hub_rt_clocksource_init();
hub_rt_clock_event_global_init();
+ hub_rt_clock_event_init();
}
void __cpuinit cpu_time_init(void)
@@ -281,7 +281,6 @@
printk("CPU %d clock is %dMHz.\n", smp_processor_id(), cpu->cpu_speed);
- hub_rt_clock_event_init();
set_c0_status(SRB_TIMOCLK);
}
diff --git a/arch/mn10300/boot/install.sh b/arch/mn10300/boot/install.sh
index 072951c..abba309 100644
--- a/arch/mn10300/boot/install.sh
+++ b/arch/mn10300/boot/install.sh
@@ -26,42 +26,42 @@
install -c -m 0755 $2 $4/vmlinuz
install -c -m 0755 $5 $4/boot.rom
install -c -m 0755 -d $4/../usr/include/linux
-cd $TOPDIR/include/linux
+cd ${srctree}/include/linux
for i in `find . -maxdepth 1 -name '*.h' -print`; do
install -c -m 0644 $i $4/../usr/include/linux
done
install -c -m 0755 -d $4/../usr/include/linux/byteorder
-cd $TOPDIR/include/linux/byteorder
+cd ${srctree}/include/linux/byteorder
for i in `find . -name '*.h' -print`; do
install -c -m 0644 $i $4/../usr/include/linux/byteorder
done
install -c -m 0755 -d $4/../usr/include/linux/lockd
-cd $TOPDIR/include/linux/lockd
+cd ${srctree}/include/linux/lockd
for i in `find . -name '*.h' -print`; do
install -c -m 0644 $i $4/../usr/include/linux/lockd
done
install -c -m 0755 -d $4/../usr/include/linux/netfilter_ipv4
-cd $TOPDIR/include/linux/netfilter_ipv4
+cd ${srctree}/include/linux/netfilter_ipv4
for i in `find . -name '*.h' -print`; do
install -c -m 0644 $i $4/../usr/include/linux/netfilter_ipv4
done
install -c -m 0755 -d $4/../usr/include/linux/nfsd
-cd $TOPDIR/include/linux/nfsd
+cd ${srctree}/include/linux/nfsd
for i in `find . -name '*.h' -print`; do
install -c -m 0644 $i $4/../usr/include/linux/nfsd/$i
done
install -c -m 0755 -d $4/../usr/include/linux/raid
-cd $TOPDIR/include/linux/raid
+cd ${srctree}/include/linux/raid
for i in `find . -name '*.h' -print`; do
install -c -m 0644 $i $4/../usr/include/linux/raid
done
install -c -m 0755 -d $4/../usr/include/linux/sunrpc
-cd $TOPDIR/include/linux/sunrpc
+cd ${srctree}/include/linux/sunrpc
for i in `find . -name '*.h' -print`; do
install -c -m 0644 $i $4/../usr/include/linux/sunrpc
done
install -c -m 0755 -d $4/../usr/include/asm
-cd $TOPDIR/include/asm
+cd ${srctree}/include/asm
for i in `find . -name '*.h' -print`; do
install -c -m 0644 $i $4/../usr/include/asm
done
diff --git a/arch/mn10300/kernel/init_task.c b/arch/mn10300/kernel/init_task.c
index 39fe688..af16f6e 100644
--- a/arch/mn10300/kernel/init_task.c
+++ b/arch/mn10300/kernel/init_task.c
@@ -19,7 +19,6 @@
#include <asm/pgtable.h>
static struct fs_struct init_fs = INIT_FS;
-static struct files_struct init_files = INIT_FILES;
static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
struct mm_struct init_mm = INIT_MM(init_mm);
diff --git a/arch/parisc/kernel/Makefile b/arch/parisc/kernel/Makefile
index 1f6585a..016d3fc 100644
--- a/arch/parisc/kernel/Makefile
+++ b/arch/parisc/kernel/Makefile
@@ -4,9 +4,6 @@
extra-y := init_task.o head.o vmlinux.lds
-AFLAGS_entry.o := -traditional
-AFLAGS_pacache.o := -traditional
-
obj-y := cache.o pacache.o setup.o traps.o time.o irq.o \
pa7300lc.o syscall.o entry.o sys_parisc.o firmware.o \
ptrace.o hardware.o inventory.o drivers.o \
diff --git a/arch/parisc/kernel/entry.S b/arch/parisc/kernel/entry.S
index 111d472..d1fa4ed 100644
--- a/arch/parisc/kernel/entry.S
+++ b/arch/parisc/kernel/entry.S
@@ -40,16 +40,8 @@
#include <linux/linkage.h>
#ifdef CONFIG_64BIT
-#define CMPIB cmpib,*
-#define CMPB cmpb,*
-#define COND(x) *x
-
.level 2.0w
#else
-#define CMPIB cmpib,
-#define CMPB cmpb,
-#define COND(x) x
-
.level 2.0
#endif
@@ -957,9 +949,9 @@
* Only do signals if we are returning to user space
*/
LDREG PT_IASQ0(%r16), %r20
- CMPIB=,n 0,%r20,intr_restore /* backward */
+ cmpib,COND(=),n 0,%r20,intr_restore /* backward */
LDREG PT_IASQ1(%r16), %r20
- CMPIB=,n 0,%r20,intr_restore /* backward */
+ cmpib,COND(=),n 0,%r20,intr_restore /* backward */
copy %r0, %r25 /* long in_syscall = 0 */
#ifdef CONFIG_64BIT
@@ -1013,10 +1005,10 @@
* we jump back to intr_restore.
*/
LDREG PT_IASQ0(%r16), %r20
- CMPIB= 0, %r20, intr_do_preempt
+ cmpib,COND(=) 0, %r20, intr_do_preempt
nop
LDREG PT_IASQ1(%r16), %r20
- CMPIB= 0, %r20, intr_do_preempt
+ cmpib,COND(=) 0, %r20, intr_do_preempt
nop
#ifdef CONFIG_64BIT
@@ -1045,7 +1037,7 @@
/* current_thread_info()->preempt_count */
mfctl %cr30, %r1
LDREG TI_PRE_COUNT(%r1), %r19
- CMPIB<> 0, %r19, intr_restore /* if preempt_count > 0 */
+ cmpib,COND(<>) 0, %r19, intr_restore /* if preempt_count > 0 */
nop /* prev insn branched backwards */
/* check if we interrupted a critical path */
@@ -1064,7 +1056,7 @@
*/
intr_extint:
- CMPIB=,n 0,%r16,1f
+ cmpib,COND(=),n 0,%r16,1f
get_stack_use_cr30
b,n 2f
@@ -1099,7 +1091,7 @@
ENTRY(intr_save) /* for os_hpmc */
mfsp %sr7,%r16
- CMPIB=,n 0,%r16,1f
+ cmpib,COND(=),n 0,%r16,1f
get_stack_use_cr30
b 2f
copy %r8,%r26
@@ -1121,7 +1113,7 @@
* adjust isr/ior below.
*/
- CMPIB=,n 6,%r26,skip_save_ior
+ cmpib,COND(=),n 6,%r26,skip_save_ior
mfctl %cr20, %r16 /* isr */
@@ -1450,11 +1442,11 @@
bb,>=,n %r9,26,nadtlb_nullify /* m bit not set, just nullify */
BL get_register,%r25
extrw,u %r9,15,5,%r8 /* Get index register # */
- CMPIB=,n -1,%r1,nadtlb_fault /* have to use slow path */
+ cmpib,COND(=),n -1,%r1,nadtlb_fault /* have to use slow path */
copy %r1,%r24
BL get_register,%r25
extrw,u %r9,10,5,%r8 /* Get base register # */
- CMPIB=,n -1,%r1,nadtlb_fault /* have to use slow path */
+ cmpib,COND(=),n -1,%r1,nadtlb_fault /* have to use slow path */
BL set_register,%r25
add,l %r1,%r24,%r1 /* doesn't affect c/b bits */
@@ -1486,7 +1478,7 @@
cmpb,<>,n %r16,%r17,nadtlb_fault /* Must be probe,[rw]*/
BL get_register,%r25 /* Find the target register */
extrw,u %r9,31,5,%r8 /* Get target register */
- CMPIB=,n -1,%r1,nadtlb_fault /* have to use slow path */
+ cmpib,COND(=),n -1,%r1,nadtlb_fault /* have to use slow path */
BL set_register,%r25
copy %r0,%r1 /* Write zero to target register */
b nadtlb_nullify /* Nullify return insn */
@@ -1570,12 +1562,12 @@
L3_ptep ptp,pte,t0,va,dbit_fault
#ifdef CONFIG_SMP
- CMPIB=,n 0,spc,dbit_nolock_20w
+ cmpib,COND(=),n 0,spc,dbit_nolock_20w
load32 PA(pa_dbit_lock),t0
dbit_spin_20w:
LDCW 0(t0),t1
- cmpib,= 0,t1,dbit_spin_20w
+ cmpib,COND(=) 0,t1,dbit_spin_20w
nop
dbit_nolock_20w:
@@ -1586,7 +1578,7 @@
idtlbt pte,prot
#ifdef CONFIG_SMP
- CMPIB=,n 0,spc,dbit_nounlock_20w
+ cmpib,COND(=),n 0,spc,dbit_nounlock_20w
ldi 1,t1
stw t1,0(t0)
@@ -1606,7 +1598,7 @@
L2_ptep ptp,pte,t0,va,dbit_fault
#ifdef CONFIG_SMP
- CMPIB=,n 0,spc,dbit_nolock_11
+ cmpib,COND(=),n 0,spc,dbit_nolock_11
load32 PA(pa_dbit_lock),t0
dbit_spin_11:
@@ -1628,7 +1620,7 @@
mtsp t1, %sr1 /* Restore sr1 */
#ifdef CONFIG_SMP
- CMPIB=,n 0,spc,dbit_nounlock_11
+ cmpib,COND(=),n 0,spc,dbit_nounlock_11
ldi 1,t1
stw t1,0(t0)
@@ -1646,7 +1638,7 @@
L2_ptep ptp,pte,t0,va,dbit_fault
#ifdef CONFIG_SMP
- CMPIB=,n 0,spc,dbit_nolock_20
+ cmpib,COND(=),n 0,spc,dbit_nolock_20
load32 PA(pa_dbit_lock),t0
dbit_spin_20:
@@ -1665,7 +1657,7 @@
idtlbt pte,prot
#ifdef CONFIG_SMP
- CMPIB=,n 0,spc,dbit_nounlock_20
+ cmpib,COND(=),n 0,spc,dbit_nounlock_20
ldi 1,t1
stw t1,0(t0)
@@ -1994,7 +1986,7 @@
/* We can't use "CMPIB<> PER_HPUX" since "im5" field is sign extended */
ldo -PER_HPUX(%r19), %r19
- CMPIB<>,n 0,%r19,1f
+ cmpib,COND(<>),n 0,%r19,1f
/* Save other hpux returns if personality is PER_HPUX */
STREG %r22,TASK_PT_GR22(%r1)
diff --git a/arch/parisc/kernel/head.S b/arch/parisc/kernel/head.S
index ec2482dc..a84e31e 100644
--- a/arch/parisc/kernel/head.S
+++ b/arch/parisc/kernel/head.S
@@ -32,7 +32,8 @@
.word 0 /* arg3 */
END(boot_args)
- .section .text.head
+ __HEAD
+
.align 4
.import init_thread_union,data
.import fault_vector_20,code /* IVA parisc 2.0 32 bit */
diff --git a/arch/parisc/kernel/init_task.c b/arch/parisc/kernel/init_task.c
index 26198a0..f5941c0 100644
--- a/arch/parisc/kernel/init_task.c
+++ b/arch/parisc/kernel/init_task.c
@@ -35,7 +35,6 @@
#include <asm/pgalloc.h>
static struct fs_struct init_fs = INIT_FS;
-static struct files_struct init_files = INIT_FILES;
static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
struct mm_struct init_mm = INIT_MM(init_mm);
diff --git a/arch/parisc/kernel/inventory.c b/arch/parisc/kernel/inventory.c
index 4845a64..bd1f7f1 100644
--- a/arch/parisc/kernel/inventory.c
+++ b/arch/parisc/kernel/inventory.c
@@ -499,7 +499,7 @@
dev->addr = kmalloc(num_addrs * sizeof(unsigned long), GFP_KERNEL);
if(!dev->addr) {
printk(KERN_ERR "%s %s(): memory allocation failure\n",
- __FILE__, __FUNCTION__);
+ __FILE__, __func__);
return;
}
diff --git a/arch/parisc/kernel/pacache.S b/arch/parisc/kernel/pacache.S
index 5901092..09b77b2 100644
--- a/arch/parisc/kernel/pacache.S
+++ b/arch/parisc/kernel/pacache.S
@@ -85,7 +85,7 @@
LDREG ITLB_OFF_COUNT(%r1), %arg2
LDREG ITLB_LOOP(%r1), %arg3
- ADDIB= -1, %arg3, fitoneloop /* Preadjust and test */
+ addib,COND(=) -1, %arg3, fitoneloop /* Preadjust and test */
movb,<,n %arg3, %r31, fitdone /* If loop < 0, skip */
copy %arg0, %r28 /* Init base addr */
@@ -95,14 +95,14 @@
copy %arg2, %r29 /* Init middle loop count */
fitmanymiddle: /* Loop if LOOP >= 2 */
- ADDIB> -1, %r31, fitmanymiddle /* Adjusted inner loop decr */
+ addib,COND(>) -1, %r31, fitmanymiddle /* Adjusted inner loop decr */
pitlbe 0(%sr1, %r28)
pitlbe,m %arg1(%sr1, %r28) /* Last pitlbe and addr adjust */
- ADDIB> -1, %r29, fitmanymiddle /* Middle loop decr */
+ addib,COND(>) -1, %r29, fitmanymiddle /* Middle loop decr */
copy %arg3, %r31 /* Re-init inner loop count */
movb,tr %arg0, %r28, fitmanyloop /* Re-init base addr */
- ADDIB<=,n -1, %r22, fitdone /* Outer loop count decr */
+ addib,COND(<=),n -1, %r22, fitdone /* Outer loop count decr */
fitoneloop: /* Loop if LOOP = 1 */
mtsp %r20, %sr1
@@ -110,10 +110,10 @@
copy %arg2, %r29 /* init middle loop count */
fitonemiddle: /* Loop if LOOP = 1 */
- ADDIB> -1, %r29, fitonemiddle /* Middle loop count decr */
+ addib,COND(>) -1, %r29, fitonemiddle /* Middle loop count decr */
pitlbe,m %arg1(%sr1, %r28) /* pitlbe for one loop */
- ADDIB> -1, %r22, fitoneloop /* Outer loop count decr */
+ addib,COND(>) -1, %r22, fitoneloop /* Outer loop count decr */
add %r21, %r20, %r20 /* increment space */
fitdone:
@@ -128,7 +128,7 @@
LDREG DTLB_OFF_COUNT(%r1), %arg2
LDREG DTLB_LOOP(%r1), %arg3
- ADDIB= -1, %arg3, fdtoneloop /* Preadjust and test */
+ addib,COND(=) -1, %arg3, fdtoneloop /* Preadjust and test */
movb,<,n %arg3, %r31, fdtdone /* If loop < 0, skip */
copy %arg0, %r28 /* Init base addr */
@@ -138,14 +138,14 @@
copy %arg2, %r29 /* Init middle loop count */
fdtmanymiddle: /* Loop if LOOP >= 2 */
- ADDIB> -1, %r31, fdtmanymiddle /* Adjusted inner loop decr */
+ addib,COND(>) -1, %r31, fdtmanymiddle /* Adjusted inner loop decr */
pdtlbe 0(%sr1, %r28)
pdtlbe,m %arg1(%sr1, %r28) /* Last pdtlbe and addr adjust */
- ADDIB> -1, %r29, fdtmanymiddle /* Middle loop decr */
+ addib,COND(>) -1, %r29, fdtmanymiddle /* Middle loop decr */
copy %arg3, %r31 /* Re-init inner loop count */
movb,tr %arg0, %r28, fdtmanyloop /* Re-init base addr */
- ADDIB<=,n -1, %r22,fdtdone /* Outer loop count decr */
+ addib,COND(<=),n -1, %r22,fdtdone /* Outer loop count decr */
fdtoneloop: /* Loop if LOOP = 1 */
mtsp %r20, %sr1
@@ -153,10 +153,10 @@
copy %arg2, %r29 /* init middle loop count */
fdtonemiddle: /* Loop if LOOP = 1 */
- ADDIB> -1, %r29, fdtonemiddle /* Middle loop count decr */
+ addib,COND(>) -1, %r29, fdtonemiddle /* Middle loop count decr */
pdtlbe,m %arg1(%sr1, %r28) /* pdtlbe for one loop */
- ADDIB> -1, %r22, fdtoneloop /* Outer loop count decr */
+ addib,COND(>) -1, %r22, fdtoneloop /* Outer loop count decr */
add %r21, %r20, %r20 /* increment space */
@@ -209,18 +209,18 @@
LDREG ICACHE_COUNT(%r1), %arg2
LDREG ICACHE_LOOP(%r1), %arg3
rsm PSW_SM_I, %r22 /* No mmgt ops during loop*/
- ADDIB= -1, %arg3, fioneloop /* Preadjust and test */
+ addib,COND(=) -1, %arg3, fioneloop /* Preadjust and test */
movb,<,n %arg3, %r31, fisync /* If loop < 0, do sync */
fimanyloop: /* Loop if LOOP >= 2 */
- ADDIB> -1, %r31, fimanyloop /* Adjusted inner loop decr */
+ addib,COND(>) -1, %r31, fimanyloop /* Adjusted inner loop decr */
fice %r0(%sr1, %arg0)
fice,m %arg1(%sr1, %arg0) /* Last fice and addr adjust */
movb,tr %arg3, %r31, fimanyloop /* Re-init inner loop count */
- ADDIB<=,n -1, %arg2, fisync /* Outer loop decr */
+ addib,COND(<=),n -1, %arg2, fisync /* Outer loop decr */
fioneloop: /* Loop if LOOP = 1 */
- ADDIB> -1, %arg2, fioneloop /* Outer loop count decr */
+ addib,COND(>) -1, %arg2, fioneloop /* Outer loop count decr */
fice,m %arg1(%sr1, %arg0) /* Fice for one loop */
fisync:
@@ -250,18 +250,18 @@
LDREG DCACHE_COUNT(%r1), %arg2
LDREG DCACHE_LOOP(%r1), %arg3
rsm PSW_SM_I, %r22
- ADDIB= -1, %arg3, fdoneloop /* Preadjust and test */
+ addib,COND(=) -1, %arg3, fdoneloop /* Preadjust and test */
movb,<,n %arg3, %r31, fdsync /* If loop < 0, do sync */
fdmanyloop: /* Loop if LOOP >= 2 */
- ADDIB> -1, %r31, fdmanyloop /* Adjusted inner loop decr */
+ addib,COND(>) -1, %r31, fdmanyloop /* Adjusted inner loop decr */
fdce %r0(%sr1, %arg0)
fdce,m %arg1(%sr1, %arg0) /* Last fdce and addr adjust */
movb,tr %arg3, %r31, fdmanyloop /* Re-init inner loop count */
- ADDIB<=,n -1, %arg2, fdsync /* Outer loop decr */
+ addib,COND(<=),n -1, %arg2, fdsync /* Outer loop decr */
fdoneloop: /* Loop if LOOP = 1 */
- ADDIB> -1, %arg2, fdoneloop /* Outer loop count decr */
+ addib,COND(>) -1, %arg2, fdoneloop /* Outer loop count decr */
fdce,m %arg1(%sr1, %arg0) /* Fdce for one loop */
fdsync:
@@ -342,7 +342,7 @@
* non-taken backward branch. Note that .+4 is a backwards branch.
* The ldd should only get executed if the branch is taken.
*/
- ADDIB>,n -1, %r1, 1b /* bundle 10 */
+ addib,COND(>),n -1, %r1, 1b /* bundle 10 */
ldd 0(%r25), %r19 /* start next loads */
#else
@@ -391,7 +391,7 @@
stw %r21, 56(%r26)
stw %r22, 60(%r26)
ldo 64(%r26), %r26
- ADDIB>,n -1, %r1, 1b
+ addib,COND(>),n -1, %r1, 1b
ldw 0(%r25), %r19
#endif
bv %r0(%r2)
@@ -515,7 +515,7 @@
stw %r21, 56(%r28)
stw %r22, 60(%r28)
ldo 64(%r28), %r28
- ADDIB> -1, %r1,1b
+ addib,COND(>) -1, %r1,1b
ldo 64(%r29), %r29
bv %r0(%r2)
@@ -574,7 +574,7 @@
std %r0, 104(%r28)
std %r0, 112(%r28)
std %r0, 120(%r28)
- ADDIB> -1, %r1, 1b
+ addib,COND(>) -1, %r1, 1b
ldo 128(%r28), %r28
#else /* ! CONFIG_64BIT */
@@ -597,7 +597,7 @@
stw %r0, 52(%r28)
stw %r0, 56(%r28)
stw %r0, 60(%r28)
- ADDIB> -1, %r1, 1b
+ addib,COND(>) -1, %r1, 1b
ldo 64(%r28), %r28
#endif /* CONFIG_64BIT */
@@ -640,7 +640,7 @@
fdc,m %r23(%r26)
fdc,m %r23(%r26)
fdc,m %r23(%r26)
- CMPB<< %r26, %r25,1b
+ cmpb,COND(<<) %r26, %r25,1b
fdc,m %r23(%r26)
sync
@@ -683,7 +683,7 @@
fdc,m %r23(%sr3, %r26)
fdc,m %r23(%sr3, %r26)
fdc,m %r23(%sr3, %r26)
- CMPB<< %r26, %r25,1b
+ cmpb,COND(<<) %r26, %r25,1b
fdc,m %r23(%sr3, %r26)
sync
@@ -726,7 +726,7 @@
fic,m %r23(%sr3, %r26)
fic,m %r23(%sr3, %r26)
fic,m %r23(%sr3, %r26)
- CMPB<< %r26, %r25,1b
+ cmpb,COND(<<) %r26, %r25,1b
fic,m %r23(%sr3, %r26)
sync
@@ -769,7 +769,7 @@
pdc,m %r23(%r26)
pdc,m %r23(%r26)
pdc,m %r23(%r26)
- CMPB<< %r26, %r25, 1b
+ cmpb,COND(<<) %r26, %r25, 1b
pdc,m %r23(%r26)
sync
@@ -833,7 +833,7 @@
fdc,m %r23(%r28)
fdc,m %r23(%r28)
fdc,m %r23(%r28)
- CMPB<< %r28, %r29, 1b
+ cmpb,COND(<<) %r28, %r29, 1b
fdc,m %r23(%r28)
sync
@@ -856,7 +856,7 @@
ldo -1(%r23), %r21
ANDCM %r26, %r21, %r26
-1: CMPB<<,n %r26, %r25, 1b
+1: cmpb,COND(<<),n %r26, %r25, 1b
fdc,m %r23(%sr3, %r26)
sync
@@ -877,7 +877,7 @@
ldo -1(%r23), %r21
ANDCM %r26, %r21, %r26
-1: CMPB<<,n %r26, %r25,1b
+1: cmpb,COND(<<),n %r26, %r25,1b
fdc,m %r23(%r26)
sync
@@ -899,7 +899,7 @@
ldo -1(%r23), %r21
ANDCM %r26, %r21, %r26
-1: CMPB<<,n %r26, %r25,1b
+1: cmpb,COND(<<),n %r26, %r25,1b
fic,m %r23(%sr3, %r26)
sync
@@ -942,7 +942,7 @@
fic,m %r23(%sr4, %r26)
fic,m %r23(%sr4, %r26)
fic,m %r23(%sr4, %r26)
- CMPB<< %r26, %r25, 1b
+ cmpb,COND(<<) %r26, %r25, 1b
fic,m %r23(%sr4, %r26)
sync
@@ -963,7 +963,7 @@
ldo -1(%r23), %r21
ANDCM %r26, %r21, %r26
-1: CMPB<<,n %r26, %r25, 1b
+1: cmpb,COND(<<),n %r26, %r25, 1b
fic,m %r23(%sr4, %r26)
sync
diff --git a/arch/parisc/kernel/parisc_ksyms.c b/arch/parisc/kernel/parisc_ksyms.c
index 5b7fc4a..0eecfbbc 100644
--- a/arch/parisc/kernel/parisc_ksyms.c
+++ b/arch/parisc/kernel/parisc_ksyms.c
@@ -152,3 +152,6 @@
EXPORT_SYMBOL(node_data);
EXPORT_SYMBOL(pfnnid_map);
#endif
+
+/* from pacache.S -- needed for copy_page */
+EXPORT_SYMBOL(copy_user_page_asm);
diff --git a/arch/parisc/kernel/perf_asm.S b/arch/parisc/kernel/perf_asm.S
index 43874ca..fa6ea99 100644
--- a/arch/parisc/kernel/perf_asm.S
+++ b/arch/parisc/kernel/perf_asm.S
@@ -20,6 +20,8 @@
*/
#include <asm/assembly.h>
+
+#include <linux/init.h>
#include <linux/linkage.h>
#ifdef CONFIG_64BIT
diff --git a/arch/parisc/kernel/signal32.c b/arch/parisc/kernel/signal32.c
index db94aff..fb59852 100644
--- a/arch/parisc/kernel/signal32.c
+++ b/arch/parisc/kernel/signal32.c
@@ -289,7 +289,7 @@
&sc->sc_iaoq[0], compat_reg);
/* Store upper half */
- compat_reg = (compat_uint_t)(regs->gr[32] >> 32);
+ compat_reg = (compat_uint_t)(regs->gr[31] >> 32);
err |= __put_user(compat_reg, &rf->rf_iaoq[0]);
DBG(2,"setup_sigcontext32: upper half iaoq[0] = %#x\n", compat_reg);
@@ -299,7 +299,7 @@
DBG(2,"setup_sigcontext32: sc->sc_iaoq[1] = %p <= %#x\n",
&sc->sc_iaoq[1], compat_reg);
/* Store upper half */
- compat_reg = (compat_uint_t)((regs->gr[32]+4) >> 32);
+ compat_reg = (compat_uint_t)((regs->gr[31]+4) >> 32);
err |= __put_user(compat_reg, &rf->rf_iaoq[1]);
DBG(2,"setup_sigcontext32: upper half iaoq[1] = %#x\n", compat_reg);
diff --git a/arch/parisc/kernel/traps.c b/arch/parisc/kernel/traps.c
index 9dc6dc4..675f1d0 100644
--- a/arch/parisc/kernel/traps.c
+++ b/arch/parisc/kernel/traps.c
@@ -275,7 +275,7 @@
/* Wot's wrong wif bein' racy? */
if (current->thread.flags & PARISC_KERNEL_DEATH) {
- printk(KERN_CRIT "%s() recursion detected.\n", __FUNCTION__);
+ printk(KERN_CRIT "%s() recursion detected.\n", __func__);
local_irq_enable();
while (1);
}
diff --git a/arch/parisc/kernel/unaligned.c b/arch/parisc/kernel/unaligned.c
index aebf3c1..e6f4b7a 100644
--- a/arch/parisc/kernel/unaligned.c
+++ b/arch/parisc/kernel/unaligned.c
@@ -30,7 +30,7 @@
/* #define DEBUG_UNALIGNED 1 */
#ifdef DEBUG_UNALIGNED
-#define DPRINTF(fmt, args...) do { printk(KERN_DEBUG "%s:%d:%s ", __FILE__, __LINE__, __FUNCTION__ ); printk(KERN_DEBUG fmt, ##args ); } while (0)
+#define DPRINTF(fmt, args...) do { printk(KERN_DEBUG "%s:%d:%s ", __FILE__, __LINE__, __func__ ); printk(KERN_DEBUG fmt, ##args ); } while (0)
#else
#define DPRINTF(fmt, args...)
#endif
@@ -460,7 +460,8 @@
goto force_sigbus;
}
- if (unaligned_count > 5 && jiffies - last_time > 5*HZ) {
+ if (unaligned_count > 5 &&
+ time_after(jiffies, last_time + 5 * HZ)) {
unaligned_count = 0;
last_time = jiffies;
}
diff --git a/arch/parisc/kernel/vmlinux.lds.S b/arch/parisc/kernel/vmlinux.lds.S
index 50b4a3a..2e516b8 100644
--- a/arch/parisc/kernel/vmlinux.lds.S
+++ b/arch/parisc/kernel/vmlinux.lds.S
@@ -50,6 +50,7 @@
_text = .; /* Text and read-only data */
.text ALIGN(16) : {
+ HEAD_TEXT
TEXT_TEXT
SCHED_TEXT
LOCK_TEXT
diff --git a/arch/parisc/lib/memcpy.c b/arch/parisc/lib/memcpy.c
index d22042d..2d68431 100644
--- a/arch/parisc/lib/memcpy.c
+++ b/arch/parisc/lib/memcpy.c
@@ -91,7 +91,7 @@
#define THRESHOLD 16
#ifdef DEBUG_MEMCPY
-#define DPRINTF(fmt, args...) do { printk(KERN_DEBUG "%s:%d:%s ", __FILE__, __LINE__, __FUNCTION__ ); printk(KERN_DEBUG fmt, ##args ); } while (0)
+#define DPRINTF(fmt, args...) do { printk(KERN_DEBUG "%s:%d:%s ", __FILE__, __LINE__, __func__ ); printk(KERN_DEBUG fmt, ##args ); } while (0)
#else
#define DPRINTF(fmt, args...)
#endif
diff --git a/arch/parisc/mm/init.c b/arch/parisc/mm/init.c
index 1f01284..ce0da68 100644
--- a/arch/parisc/mm/init.c
+++ b/arch/parisc/mm/init.c
@@ -547,6 +547,7 @@
}
unsigned long *empty_zero_page __read_mostly;
+EXPORT_SYMBOL(empty_zero_page);
void show_mem(void)
{
@@ -555,8 +556,6 @@
printk(KERN_INFO "Mem-info:\n");
show_free_areas();
- printk(KERN_INFO "Free swap: %6ldkB\n",
- nr_swap_pages<<(PAGE_SHIFT-10));
#ifndef CONFIG_DISCONTIGMEM
i = max_mapnr;
while (i-- > 0) {
@@ -606,7 +605,7 @@
int i, j;
for (i = 0; i < npmem_ranges; i++) {
- zl = node_zonelist(i);
+ zl = node_zonelist(i, 0);
for (j = 0; j < MAX_NR_ZONES; j++) {
struct zoneref *z;
struct zone *zone;
diff --git a/arch/powerpc/boot/.gitignore b/arch/powerpc/boot/.gitignore
index 2347294..2f50acd 100644
--- a/arch/powerpc/boot/.gitignore
+++ b/arch/powerpc/boot/.gitignore
@@ -20,21 +20,19 @@
mktree
uImage
cuImage.*
+dtbImage.*
treeImage.*
zImage
+zImage.initrd
zImage.bin.*
zImage.chrp
zImage.coff
-zImage.coff.lds
-zImage.ep*
+zImage.holly
zImage.iseries
zImage.*lds
zImage.miboot
zImage.pmac
zImage.pseries
-zImage.redboot*
-zImage.sandpoint
-zImage.vmode
zconf.h
zlib.h
zutil.h
diff --git a/arch/powerpc/boot/4xx.c b/arch/powerpc/boot/4xx.c
index 758edf1..5c87843 100644
--- a/arch/powerpc/boot/4xx.c
+++ b/arch/powerpc/boot/4xx.c
@@ -21,6 +21,25 @@
#include "reg.h"
#include "dcr.h"
+static unsigned long chip_11_errata(unsigned long memsize)
+{
+ unsigned long pvr;
+
+ pvr = mfpvr();
+
+ switch (pvr & 0xf0000ff0) {
+ case 0x40000850:
+ case 0x400008d0:
+ case 0x200008d0:
+ memsize -= 4096;
+ break;
+ default:
+ break;
+ }
+
+ return memsize;
+}
+
/* Read the 4xx SDRAM controller to get size of system memory. */
void ibm4xx_sdram_fixup_memsize(void)
{
@@ -34,6 +53,7 @@
memsize += SDRAM_CONFIG_BANK_SIZE(bank_config);
}
+ memsize = chip_11_errata(memsize);
dt_fixup_memory(0, memsize);
}
@@ -199,6 +219,7 @@
bank = 4; /* 4 banks */
memsize = cs * (1 << (col+row)) * bank * dpath;
+ memsize = chip_11_errata(memsize);
dt_fixup_memory(0, memsize);
}
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index 7822d25..d53b84e 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -99,7 +99,7 @@
@cp $< $@
clean-files := $(zlib) $(zlibheader) $(zliblinuxheader) \
- empty.c zImage zImage.coff.lds zImage.ps3.lds zImage.lds
+ empty.c zImage.coff.lds zImage.ps3.lds zImage.lds
quiet_cmd_bootcc = BOOTCC $@
cmd_bootcc = $(CROSS32CC) -Wp,-MD,$(depfile) $(BOOTCFLAGS) -c -o $@ $<
@@ -221,8 +221,8 @@
image-$(CONFIG_YOSEMITE) += cuImage.yosemite
# Board ports in arch/powerpc/platform/8xx/Kconfig
-image-$(CONFIG_PPC_MPC86XADS) += cuImage.mpc866ads
-image-$(CONFIG_PPC_MPC885ADS) += cuImage.mpc885ads
+image-$(CONFIG_MPC86XADS) += cuImage.mpc866ads
+image-$(CONFIG_MPC885ADS) += cuImage.mpc885ads
image-$(CONFIG_PPC_EP88XC) += dtbImage.ep88xc
image-$(CONFIG_PPC_ADDER875) += cuImage.adder875-uboot \
dtbImage.adder875-redboot
@@ -339,7 +339,9 @@
sh -x $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" vmlinux System.map "$(INSTALL_PATH)" $<
# anything not in $(targets)
-clean-files += $(image-) $(initrd-) zImage zImage.initrd cuImage.* treeImage.* \
+clean-files += $(image-) $(initrd-) cuImage.* dtbImage.* treeImage.* \
+ zImage zImage.initrd zImage.chrp zImage.coff zImage.holly \
+ zImage.iseries zImage.miboot zImage.pmac zImage.pseries \
otheros.bld *.dtb
# clean up files cached by wrapper
diff --git a/arch/powerpc/boot/dts/mpc8377_mds.dts b/arch/powerpc/boot/dts/mpc8377_mds.dts
index eac8e1b..fea5925 100644
--- a/arch/powerpc/boot/dts/mpc8377_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8377_mds.dts
@@ -268,6 +268,41 @@
interrupt-parent = <&ipic>;
};
+ dma@82a8 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8377-dma", "fsl,elo-dma";
+ reg = <0x82a8 4>;
+ ranges = <0 0x8100 0x1a8>;
+ interrupt-parent = <&ipic>;
+ interrupts = <0x47 8>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
+ reg = <0 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <0x47 8>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x80 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <0x47 8>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x100 0x80>;
+ interrupt-parent = <&ipic>;
+ interrupts = <0x47 8>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8377-dma-channel", "fsl,elo-dma-channel";
+ reg = <0x180 0x28>;
+ interrupt-parent = <&ipic>;
+ interrupts = <0x47 8>;
+ };
+ };
+
/* IPIC
* interrupts cell = <intr #, sense>
* sense values match linux IORESOURCE_IRQ_* defines:
diff --git a/arch/powerpc/boot/dts/mpc8610_hpcd.dts b/arch/powerpc/boot/dts/mpc8610_hpcd.dts
index bba234e..fa9b6bb 100644
--- a/arch/powerpc/boot/dts/mpc8610_hpcd.dts
+++ b/arch/powerpc/boot/dts/mpc8610_hpcd.dts
@@ -46,9 +46,63 @@
reg = <0x00000000 0x20000000>; // 512M at 0x0
};
- board-control@e8000000 {
- compatible = "fsl,fpga-pixis";
- reg = <0xe8000000 32>; // pixis at 0xe8000000
+ localbus@e0005000 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8610-elbc", "fsl,elbc", "simple-bus";
+ reg = <0xe0005000 0x1000>;
+ interrupts = <19 2>;
+ interrupt-parent = <&mpic>;
+ ranges = <0 0 0xf8000000 0x08000000
+ 1 0 0xf0000000 0x08000000
+ 2 0 0xe8400000 0x00008000
+ 4 0 0xe8440000 0x00008000
+ 5 0 0xe8480000 0x00008000
+ 6 0 0xe84c0000 0x00008000
+ 3 0 0xe8000000 0x00000020>;
+
+ flash@0,0 {
+ compatible = "cfi-flash";
+ reg = <0 0 0x8000000>;
+ bank-width = <2>;
+ device-width = <1>;
+ };
+
+ flash@1,0 {
+ compatible = "cfi-flash";
+ reg = <1 0 0x8000000>;
+ bank-width = <2>;
+ device-width = <1>;
+ };
+
+ flash@2,0 {
+ compatible = "fsl,mpc8610-fcm-nand",
+ "fsl,elbc-fcm-nand";
+ reg = <2 0 0x8000>;
+ };
+
+ flash@4,0 {
+ compatible = "fsl,mpc8610-fcm-nand",
+ "fsl,elbc-fcm-nand";
+ reg = <4 0 0x8000>;
+ };
+
+ flash@5,0 {
+ compatible = "fsl,mpc8610-fcm-nand",
+ "fsl,elbc-fcm-nand";
+ reg = <5 0 0x8000>;
+ };
+
+ flash@6,0 {
+ compatible = "fsl,mpc8610-fcm-nand",
+ "fsl,elbc-fcm-nand";
+ reg = <6 0 0x8000>;
+ };
+
+ board-control@3,0 {
+ compatible = "fsl,fpga-pixis";
+ reg = <3 0 0x20>;
+ };
};
soc@e0000000 {
@@ -197,14 +251,14 @@
dma@c300 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "fsl,mpc8610-dma", "fsl,mpc8540-dma";
+ compatible = "fsl,mpc8610-dma", "fsl,eloplus-dma";
cell-index = <1>;
reg = <0xc300 0x4>; /* DMA general status register */
ranges = <0x0 0xc100 0x200>;
dma-channel@0 {
compatible = "fsl,mpc8610-dma-channel",
- "fsl,mpc8540-dma-channel";
+ "fsl,eloplus-dma-channel";
cell-index = <0>;
reg = <0x0 0x80>;
interrupt-parent = <&mpic>;
@@ -212,7 +266,7 @@
};
dma-channel@1 {
compatible = "fsl,mpc8610-dma-channel",
- "fsl,mpc8540-dma-channel";
+ "fsl,eloplus-dma-channel";
cell-index = <1>;
reg = <0x80 0x80>;
interrupt-parent = <&mpic>;
@@ -220,7 +274,7 @@
};
dma-channel@2 {
compatible = "fsl,mpc8610-dma-channel",
- "fsl,mpc8540-dma-channel";
+ "fsl,eloplus-dma-channel";
cell-index = <2>;
reg = <0x100 0x80>;
interrupt-parent = <&mpic>;
@@ -228,7 +282,7 @@
};
dma-channel@3 {
compatible = "fsl,mpc8610-dma-channel",
- "fsl,mpc8540-dma-channel";
+ "fsl,eloplus-dma-channel";
cell-index = <3>;
reg = <0x180 0x80>;
interrupt-parent = <&mpic>;
diff --git a/arch/powerpc/boot/dts/sbc8548.dts b/arch/powerpc/boot/dts/sbc8548.dts
index b86e65d..22d9671 100644
--- a/arch/powerpc/boot/dts/sbc8548.dts
+++ b/arch/powerpc/boot/dts/sbc8548.dts
@@ -52,6 +52,99 @@
reg = <0x00000000 0x10000000>;
};
+ localbus@e0000000 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ reg = <0xe0000000 0x5000>;
+ interrupt-parent = <&mpic>;
+
+ ranges = <0x0 0x0 0xff800000 0x00800000 /*8MB Flash*/
+ 0x3 0x0 0xf0000000 0x04000000 /*64MB SDRAM*/
+ 0x4 0x0 0xf4000000 0x04000000 /*64MB SDRAM*/
+ 0x5 0x0 0xf8000000 0x00b10000 /* EPLD */
+ 0x6 0x0 0xfb800000 0x04000000>; /*64MB Flash*/
+
+
+ flash@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x800000>;
+ bank-width = <1>;
+ device-width = <1>;
+ partition@0x0 {
+ label = "space";
+ reg = <0x00000000 0x00100000>;
+ };
+ partition@0x100000 {
+ label = "bootloader";
+ reg = <0x00100000 0x00700000>;
+ read-only;
+ };
+ };
+
+ epld@5,0 {
+ compatible = "wrs,epld-localbus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ reg = <0x5 0x0 0x00b10000>;
+ ranges = <
+ 0x0 0x0 0x5 0x000000 0x1fff /* LED */
+ 0x1 0x0 0x5 0x100000 0x1fff /* Switches */
+ 0x3 0x0 0x5 0x300000 0x1fff /* HW Rev. */
+ 0xb 0x0 0x5 0xb00000 0x1fff /* EEPROM */
+ >;
+
+ led@0,0 {
+ compatible = "led";
+ reg = <0x0 0x0 0x1fff>;
+ };
+
+ switches@1,0 {
+ compatible = "switches";
+ reg = <0x1 0x0 0x1fff>;
+ };
+
+ hw-rev@3,0 {
+ compatible = "hw-rev";
+ reg = <0x3 0x0 0x1fff>;
+ };
+
+ eeprom@b,0 {
+ compatible = "eeprom";
+ reg = <0xb 0 0x1fff>;
+ };
+
+ };
+
+ alt-flash@6,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x6 0x0 0x04000000>;
+ compatible = "cfi-flash";
+ bank-width = <4>;
+ device-width = <1>;
+ partition@0x0 {
+ label = "bootloader";
+ reg = <0x00000000 0x00100000>;
+ read-only;
+ };
+ partition@0x00100000 {
+ label = "file-system";
+ reg = <0x00100000 0x01f00000>;
+ };
+ partition@0x02000000 {
+ label = "boot-config";
+ reg = <0x02000000 0x00100000>;
+ };
+ partition@0x02100000 {
+ label = "space";
+ reg = <0x02100000 0x01f00000>;
+ };
+ };
+ };
+
soc8548@e0000000 {
#address-cells = <1>;
#size-cells = <1>;
@@ -59,6 +152,7 @@
ranges = <0x00000000 0xe0000000 0x00100000>;
reg = <0xe0000000 0x00001000>; // CCSRBAR
bus-frequency = <0>;
+ compatible = "simple-bus";
memory-controller@2000 {
compatible = "fsl,8548-memory-controller";
diff --git a/arch/powerpc/configs/chrp32_defconfig b/arch/powerpc/configs/chrp32_defconfig
index d7fd298..05360d4 100644
--- a/arch/powerpc/configs/chrp32_defconfig
+++ b/arch/powerpc/configs/chrp32_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Thu Mar 27 13:55:37 2008
+# Linux kernel version: 2.6.26-rc3
+# Tue May 20 20:00:44 2008
#
# CONFIG_PPC64 is not set
@@ -32,6 +32,8 @@
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
@@ -88,6 +90,7 @@
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -95,6 +98,7 @@
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
@@ -115,12 +119,14 @@
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
@@ -217,11 +223,13 @@
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PM is not set
@@ -245,6 +253,7 @@
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
@@ -254,11 +263,11 @@
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
@@ -299,8 +308,6 @@
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
@@ -398,6 +405,7 @@
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
# CONFIG_PNP is not set
CONFIG_BLK_DEV=y
@@ -484,22 +492,8 @@
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_BLK_DEV_TC86C001 is not set
-
-#
-# Other IDE chipsets support
-#
-
-#
-# Note: most of these also require special kernel boot parameters
-#
-# CONFIG_BLK_DEV_4DRIVES is not set
-# CONFIG_BLK_DEV_ALI14XX is not set
-# CONFIG_BLK_DEV_DTC2278 is not set
-# CONFIG_BLK_DEV_HT6560B is not set
-# CONFIG_BLK_DEV_QD65XX is not set
-# CONFIG_BLK_DEV_UMC8672 is not set
CONFIG_BLK_DEV_IDEDMA=y
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
+# CONFIG_BLK_DEV_HD_ONLY is not set
# CONFIG_BLK_DEV_HD is not set
#
@@ -641,7 +635,6 @@
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=y
-# CONFIG_PCNET32_NAPI is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
@@ -684,7 +677,6 @@
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
@@ -703,6 +695,7 @@
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
@@ -710,6 +703,7 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
@@ -813,6 +807,7 @@
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
@@ -853,13 +848,7 @@
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_CHARDEV is not set
-
-#
-# I2C Algorithms
-#
CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
#
# I2C Hardware Bus support
@@ -890,6 +879,7 @@
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
@@ -899,19 +889,13 @@
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
@@ -928,12 +912,22 @@
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
@@ -953,8 +947,8 @@
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
CONFIG_FB_MACMODES=y
CONFIG_FB_BACKLIGHT=y
@@ -1072,11 +1066,13 @@
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_EHCI_HCD_PPC_OF is not set
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_HCD_PPC_OF is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
@@ -1112,6 +1108,7 @@
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
@@ -1153,14 +1150,11 @@
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -1180,7 +1174,6 @@
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
@@ -1314,6 +1307,7 @@
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
@@ -1334,6 +1328,7 @@
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -1344,6 +1339,7 @@
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
@@ -1357,6 +1353,7 @@
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
@@ -1371,6 +1368,7 @@
CONFIG_XMON=y
CONFIG_XMON_DEFAULT=y
CONFIG_XMON_DISASSEMBLY=y
+CONFIG_IRQSTACKS=y
# CONFIG_BDI_SWITCH is not set
# CONFIG_BOOTX_TEXT is not set
# CONFIG_PPC_EARLY_DEBUG is not set
@@ -1382,50 +1380,80 @@
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=m
CONFIG_CRYPTO_BLKCIPHER=m
-# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=m
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=m
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_CRYPTO_SHA1=m
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
# CONFIG_CRYPTO_HW is not set
# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/g5_defconfig b/arch/powerpc/configs/g5_defconfig
index 88338a9..db34909 100644
--- a/arch/powerpc/configs/g5_defconfig
+++ b/arch/powerpc/configs/g5_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Thu Mar 27 13:55:43 2008
+# Linux kernel version: 2.6.26-rc3
+# Tue May 20 20:01:18 2008
#
CONFIG_PPC64=y
@@ -29,6 +29,9 @@
CONFIG_GENERIC_HARDIRQS=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_ARCH_HAS_ILOG2_U64=y
@@ -91,6 +94,7 @@
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -119,12 +123,14 @@
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
@@ -165,11 +171,11 @@
CONFIG_PPC_PMAC64=y
# CONFIG_PPC_MAPLE is not set
# CONFIG_PPC_PASEMI is not set
-# CONFIG_PPC_CELLEB is not set
# CONFIG_PPC_PS3 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PPC_IBM_CELL_BLADE is not set
+# CONFIG_PPC_CELLEB is not set
# CONFIG_PQ2ADS is not set
CONFIG_PPC_NATIVE=y
# CONFIG_IPIC is not set
@@ -190,6 +196,7 @@
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
@@ -224,7 +231,6 @@
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
-CONFIG_FORCE_MAX_ZONEORDER=13
CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
CONFIG_IOMMU_VMERGE=y
CONFIG_IOMMU_HELPER=y
@@ -248,12 +254,14 @@
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
# CONFIG_PPC_HAS_HASH_64K is not set
# CONFIG_PPC_64K_PAGES is not set
+CONFIG_FORCE_MAX_ZONEORDER=13
# CONFIG_SCHED_SMT is not set
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
@@ -278,7 +286,10 @@
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
+CONFIG_PAGE_OFFSET=0xc000000000000000
CONFIG_KERNEL_START=0xc000000000000000
+CONFIG_PHYSICAL_START=0x00000000
#
# Networking
@@ -325,8 +336,6 @@
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
@@ -342,6 +351,7 @@
# CONFIG_NF_CT_ACCT is not set
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_EVENTS=y
+# CONFIG_NF_CT_PROTO_DCCP is not set
# CONFIG_NF_CT_PROTO_SCTP is not set
# CONFIG_NF_CT_PROTO_UDPLITE is not set
# CONFIG_NF_CONNTRACK_AMANDA is not set
@@ -418,6 +428,7 @@
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -465,7 +476,6 @@
#
# IDE chipset support/bugfixes
#
-CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_PLATFORM is not set
CONFIG_BLK_DEV_IDEDMA_SFF=y
@@ -506,7 +516,7 @@
CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y
CONFIG_BLK_DEV_IDEDMA_PMAC=y
CONFIG_BLK_DEV_IDEDMA=y
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
+# CONFIG_BLK_DEV_HD_ONLY is not set
# CONFIG_BLK_DEV_HD is not set
#
@@ -584,61 +594,10 @@
# CONFIG_SCSI_SRP is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
-CONFIG_SATA_SVW=y
-# CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIL24 is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_VIA is not set
-# CONFIG_PATA_WINBOND is not set
-# CONFIG_PATA_PLATFORM is not set
+# CONFIG_ATA_SFF is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=y
@@ -740,7 +699,6 @@
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
# CONFIG_BNX2 is not set
@@ -755,10 +713,10 @@
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
-# CONFIG_PASEMI_MAC is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
CONFIG_TR=y
CONFIG_IBMOL=y
# CONFIG_3C359 is not set
@@ -769,6 +727,7 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
@@ -865,6 +824,7 @@
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
@@ -895,13 +855,7 @@
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
#
# I2C Hardware Bus support
@@ -930,6 +884,7 @@
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
@@ -939,19 +894,13 @@
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
@@ -968,12 +917,22 @@
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
# CONFIG_USB_DABUSB is not set
@@ -995,8 +954,8 @@
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
CONFIG_FB_MACMODES=y
CONFIG_FB_BACKLIGHT=y
@@ -1112,6 +1071,7 @@
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
@@ -1198,11 +1158,11 @@
# CONFIG_SND_SOC is not set
#
-# SoC Audio support for SuperH
+# ALSA SoC audio for Freescale SOCs
#
#
-# ALSA SoC audio for Freescale SOCs
+# SoC Audio for the Texas Instruments OMAP
#
#
@@ -1222,6 +1182,7 @@
CONFIG_HID_FF=y
CONFIG_HID_PID=y
CONFIG_LOGITECH_FF=y
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_PANTHERLORD_FF is not set
CONFIG_THRUSTMASTER_FF=y
# CONFIG_ZEROPLUS_FF is not set
@@ -1245,11 +1206,13 @@
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_EHCI_HCD_PPC_OF is not set
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PPC_OF=y
CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
@@ -1288,6 +1251,7 @@
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
@@ -1342,9 +1306,11 @@
CONFIG_USB_SERIAL_MCT_U232=m
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_MOTOROLA is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
CONFIG_USB_SERIAL_PL2303=m
# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_HP4X is not set
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
@@ -1383,14 +1349,11 @@
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -1420,9 +1383,9 @@
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
# CONFIG_XFS_QUOTA is not set
-CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
@@ -1488,13 +1451,11 @@
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
@@ -1583,9 +1544,10 @@
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
@@ -1603,6 +1565,7 @@
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
@@ -1613,18 +1576,23 @@
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
@@ -1648,53 +1616,83 @@
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_NULL=m
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
-CONFIG_CRYPTO_NULL=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_CAMELLIA is not set
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_AUTHENC=m
# CONFIG_CRYPTO_LZO is not set
# CONFIG_CRYPTO_HW is not set
# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/iseries_defconfig b/arch/powerpc/configs/iseries_defconfig
index b3128fb..63f0bdb 100644
--- a/arch/powerpc/configs/iseries_defconfig
+++ b/arch/powerpc/configs/iseries_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Thu Mar 27 13:55:45 2008
+# Linux kernel version: 2.6.26-rc3
+# Tue May 20 20:01:36 2008
#
CONFIG_PPC64=y
@@ -30,6 +30,9 @@
CONFIG_GENERIC_HARDIRQS=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_ARCH_HAS_ILOG2_U64=y
@@ -91,6 +94,7 @@
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -118,12 +122,14 @@
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
@@ -172,11 +178,11 @@
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_MAPLE is not set
# CONFIG_PPC_PASEMI is not set
-# CONFIG_PPC_CELLEB is not set
# CONFIG_PPC_PS3 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PPC_IBM_CELL_BLADE is not set
+# CONFIG_PPC_CELLEB is not set
# CONFIG_PQ2ADS is not set
# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
@@ -212,7 +218,6 @@
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
-CONFIG_FORCE_MAX_ZONEORDER=13
CONFIG_IOMMU_VMERGE=y
CONFIG_IOMMU_HELPER=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
@@ -234,12 +239,14 @@
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
# CONFIG_PPC_HAS_HASH_64K is not set
# CONFIG_PPC_64K_PAGES is not set
+CONFIG_FORCE_MAX_ZONEORDER=13
# CONFIG_SCHED_SMT is not set
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
@@ -263,7 +270,10 @@
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
+CONFIG_PAGE_OFFSET=0xc000000000000000
CONFIG_KERNEL_START=0xc000000000000000
+CONFIG_PHYSICAL_START=0x00000000
#
# Networking
@@ -310,8 +320,6 @@
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
@@ -327,6 +335,7 @@
# CONFIG_NF_CT_ACCT is not set
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_EVENTS=y
+# CONFIG_NF_CT_PROTO_DCCP is not set
# CONFIG_NF_CT_PROTO_SCTP is not set
# CONFIG_NF_CT_PROTO_UDPLITE is not set
# CONFIG_NF_CONNTRACK_AMANDA is not set
@@ -631,7 +640,6 @@
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=y
-CONFIG_PCNET32_NAPI=y
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
@@ -667,7 +675,6 @@
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
@@ -682,10 +689,10 @@
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
-# CONFIG_PASEMI_MAC is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
CONFIG_TR=y
CONFIG_IBMOL=y
# CONFIG_3C359 is not set
@@ -696,6 +703,7 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
CONFIG_ISERIES_VETH=y
# CONFIG_FDDI is not set
@@ -762,6 +770,7 @@
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
@@ -793,12 +802,7 @@
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
@@ -815,12 +819,22 @@
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
@@ -854,14 +868,11 @@
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -895,9 +906,9 @@
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
# CONFIG_XFS_QUOTA is not set
-CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
CONFIG_GFS2_FS=m
CONFIG_GFS2_FS_LOCKING_NOLOCK=m
CONFIG_GFS2_FS_LOCKING_DLM=m
@@ -966,13 +977,11 @@
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
@@ -1047,9 +1056,10 @@
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
@@ -1071,6 +1081,7 @@
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
@@ -1081,18 +1092,23 @@
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
@@ -1116,53 +1132,83 @@
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_NULL=m
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
-CONFIG_CRYPTO_NULL=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_SEED=m
# CONFIG_CRYPTO_SALSA20 is not set
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_CAMELLIA is not set
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_AUTHENC=m
# CONFIG_CRYPTO_LZO is not set
# CONFIG_CRYPTO_HW is not set
# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/mpc8610_hpcd_defconfig b/arch/powerpc/configs/mpc8610_hpcd_defconfig
index 9270afe..7e5b9ce 100644
--- a/arch/powerpc/configs/mpc8610_hpcd_defconfig
+++ b/arch/powerpc/configs/mpc8610_hpcd_defconfig
@@ -358,7 +358,93 @@
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_OF_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PHYSMAP_OF=y
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_CAFE is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+CONFIG_MTD_NAND_FSL_ELBC=y
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
@@ -567,14 +653,11 @@
# CONFIG_NET_VENDOR_3COM is not set
CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
-CONFIG_TULIP=y
-# CONFIG_TULIP_MWI is not set
-CONFIG_TULIP_MMIO=y
-# CONFIG_TULIP_NAPI is not set
+# CONFIG_TULIP is not set
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
-# CONFIG_ULI526X is not set
+CONFIG_ULI526X=y
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
diff --git a/arch/powerpc/configs/pasemi_defconfig b/arch/powerpc/configs/pasemi_defconfig
index 09f3062..199e5f5 100644
--- a/arch/powerpc/configs/pasemi_defconfig
+++ b/arch/powerpc/configs/pasemi_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Tue Mar 25 10:25:48 2008
+# Linux kernel version: 2.6.26-rc3
+# Tue May 27 16:08:06 2008
#
CONFIG_PPC64=y
@@ -29,6 +29,9 @@
CONFIG_GENERIC_HARDIRQS=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_ARCH_HAS_ILOG2_U64=y
@@ -87,6 +90,7 @@
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -115,12 +119,14 @@
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
@@ -167,11 +173,11 @@
CONFIG_PPC_PASEMI_IOMMU=y
# CONFIG_PPC_PASEMI_IOMMU_DMA_FORCE is not set
CONFIG_PPC_PASEMI_MDIO=y
-# CONFIG_PPC_CELLEB is not set
# CONFIG_PPC_PS3 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PPC_IBM_CELL_BLADE is not set
+# CONFIG_PPC_CELLEB is not set
# CONFIG_PQ2ADS is not set
CONFIG_PPC_NATIVE=y
# CONFIG_IPIC is not set
@@ -192,6 +198,7 @@
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
@@ -226,7 +233,6 @@
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
-CONFIG_FORCE_MAX_ZONEORDER=9
CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
CONFIG_IOMMU_VMERGE=y
CONFIG_IOMMU_HELPER=y
@@ -249,12 +255,14 @@
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_PPC_HAS_HASH_64K=y
CONFIG_PPC_64K_PAGES=y
+CONFIG_FORCE_MAX_ZONEORDER=9
# CONFIG_PPC_SUBPAGE_PROT is not set
# CONFIG_SCHED_SMT is not set
CONFIG_PROC_DEVICETREE=y
@@ -290,9 +298,12 @@
# CONFIG_YENTA is not set
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not set
-# CONFIG_ELECTRA_CF is not set
+CONFIG_ELECTRA_CF=y
# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
+CONFIG_PAGE_OFFSET=0xc000000000000000
CONFIG_KERNEL_START=0xc000000000000000
+CONFIG_PHYSICAL_START=0x00000000
#
# Networking
@@ -341,8 +352,6 @@
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -473,6 +482,7 @@
#
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -520,7 +530,6 @@
#
# IDE chipset support/bugfixes
#
-# CONFIG_IDE_GENERIC is not set
# CONFIG_BLK_DEV_PLATFORM is not set
#
@@ -554,7 +563,7 @@
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
# CONFIG_BLK_DEV_IDEDMA is not set
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
+# CONFIG_BLK_DEV_HD_ONLY is not set
# CONFIG_BLK_DEV_HD is not set
#
@@ -632,7 +641,10 @@
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
+CONFIG_SATA_SIL24=y
+CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
CONFIG_SATA_MV=y
@@ -642,7 +654,6 @@
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
-CONFIG_SATA_SIL24=y
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
@@ -689,6 +700,7 @@
# CONFIG_PATA_WINBOND is not set
CONFIG_PATA_PLATFORM=y
CONFIG_PATA_OF_PLATFORM=y
+# CONFIG_PATA_SCH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=y
@@ -791,7 +803,6 @@
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
# CONFIG_BNX2 is not set
@@ -810,6 +821,7 @@
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
@@ -817,6 +829,7 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
@@ -890,6 +903,7 @@
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
@@ -917,7 +931,6 @@
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_PASEMI=y
-# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
@@ -936,13 +949,7 @@
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
CONFIG_I2C_ALGOBIT=y
-CONFIG_I2C_ALGOPCF=y
-CONFIG_I2C_ALGOPCA=y
#
# I2C Hardware Bus support
@@ -971,6 +978,7 @@
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
@@ -980,19 +988,13 @@
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
@@ -1062,12 +1064,22 @@
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
CONFIG_DAB=y
# CONFIG_USB_DABUSB is not set
@@ -1094,8 +1106,8 @@
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
CONFIG_FB_MACMODES=y
CONFIG_FB_BACKLIGHT=y
@@ -1213,6 +1225,7 @@
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
@@ -1292,11 +1305,11 @@
# CONFIG_SND_SOC is not set
#
-# SoC Audio support for SuperH
+# ALSA SoC audio for Freescale SOCs
#
#
-# ALSA SoC audio for Freescale SOCs
+# SoC Audio for the Texas Instruments OMAP
#
#
@@ -1334,11 +1347,13 @@
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_HCD_PPC_OF is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
@@ -1354,6 +1369,7 @@
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -1375,6 +1391,7 @@
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
CONFIG_USB_LIBUSUAL=y
#
@@ -1416,6 +1433,7 @@
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC=y
@@ -1475,10 +1493,6 @@
# on-CPU RTC drivers
#
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -1576,12 +1590,10 @@
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
@@ -1665,9 +1677,10 @@
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
CONFIG_CRC_CCITT=y
# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
@@ -1677,6 +1690,7 @@
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
@@ -1684,6 +1698,7 @@
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -1694,18 +1709,23 @@
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
@@ -1735,53 +1755,83 @@
CONFIG_ASYNC_MEMCPY=y
CONFIG_ASYNC_XOR=y
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=y
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-CONFIG_CRYPTO_CBC=y
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-CONFIG_CRYPTO_BLOWFISH=y
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_BLOWFISH=y
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/pmac32_defconfig b/arch/powerpc/configs/pmac32_defconfig
index fca1142..3688e4b 100644
--- a/arch/powerpc/configs/pmac32_defconfig
+++ b/arch/powerpc/configs/pmac32_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Thu Mar 27 13:56:21 2008
+# Linux kernel version: 2.6.26-rc3
+# Tue May 20 20:02:24 2008
#
# CONFIG_PPC64 is not set
@@ -31,6 +31,8 @@
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_GENERIC_HWEIGHT=y
@@ -91,6 +93,7 @@
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -119,12 +122,14 @@
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
@@ -185,6 +190,7 @@
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
@@ -236,16 +242,17 @@
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_WANTS_FREEZER_CONTROL=y
CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
CONFIG_PM_DEBUG=y
# CONFIG_PM_VERBOSE is not set
CONFIG_CAN_PM_TRACE=y
@@ -292,6 +299,7 @@
# CONFIG_I82092 is not set
CONFIG_PCCARD_NONSTATIC=m
# CONFIG_HOTPLUG_PCI is not set
+# CONFIG_HAS_RAPIDIO is not set
#
# Advanced setup
@@ -301,11 +309,11 @@
#
# Default settings for advanced configuration options are used
#
-CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
+CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_BOOT_LOAD=0x00800000
#
# Networking
@@ -352,8 +360,6 @@
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
@@ -369,6 +375,7 @@
# CONFIG_NF_CT_ACCT is not set
# CONFIG_NF_CONNTRACK_MARK is not set
# CONFIG_NF_CONNTRACK_EVENTS is not set
+CONFIG_NF_CT_PROTO_DCCP=m
# CONFIG_NF_CT_PROTO_SCTP is not set
# CONFIG_NF_CT_PROTO_UDPLITE is not set
# CONFIG_NF_CONNTRACK_AMANDA is not set
@@ -445,6 +452,7 @@
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
# CONFIG_NF_NAT_SNMP_BASIC is not set
+CONFIG_NF_NAT_PROTO_DCCP=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
@@ -586,7 +594,6 @@
# Rate control algorithm selection
#
CONFIG_MAC80211_RC_DEFAULT_PID=y
-# CONFIG_MAC80211_RC_DEFAULT_SIMPLE is not set
# CONFIG_MAC80211_RC_DEFAULT_NONE is not set
#
@@ -598,7 +605,7 @@
#
CONFIG_MAC80211_RC_DEFAULT="pid"
CONFIG_MAC80211_RC_PID=y
-# CONFIG_MAC80211_RC_SIMPLE is not set
+# CONFIG_MAC80211_MESH is not set
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set
# CONFIG_MAC80211_DEBUG is not set
@@ -607,7 +614,6 @@
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
-# CONFIG_IEEE80211_SOFTMAC is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -629,6 +635,7 @@
CONFIG_PROC_EVENTS=y
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -720,7 +727,7 @@
CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y
CONFIG_BLK_DEV_IDEDMA_PMAC=y
CONFIG_BLK_DEV_IDEDMA=y
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
+# CONFIG_BLK_DEV_HD_ONLY is not set
# CONFIG_BLK_DEV_HD is not set
#
@@ -906,7 +913,6 @@
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=y
-# CONFIG_PCNET32_NAPI is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
@@ -940,7 +946,6 @@
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
@@ -959,6 +964,7 @@
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
@@ -992,6 +998,8 @@
# CONFIG_P54_USB is not set
# CONFIG_P54_PCI is not set
# CONFIG_ATH5K is not set
+# CONFIG_IWLCORE is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_IWL4965 is not set
# CONFIG_IWL3945 is not set
# CONFIG_HOSTAP is not set
@@ -1110,6 +1118,7 @@
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
@@ -1156,13 +1165,7 @@
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m
-
-#
-# I2C Algorithms
-#
CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
#
# I2C Hardware Bus support
@@ -1192,6 +1195,7 @@
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
@@ -1201,19 +1205,13 @@
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
@@ -1230,6 +1228,7 @@
#
CONFIG_SSB_POSSIBLE=y
CONFIG_SSB=m
+CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
CONFIG_SSB_B43_PCI_BRIDGE=y
@@ -1243,12 +1242,22 @@
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
@@ -1276,8 +1285,8 @@
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
CONFIG_FB_MACMODES=y
CONFIG_FB_BACKLIGHT=y
@@ -1413,6 +1422,7 @@
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
@@ -1505,11 +1515,11 @@
# CONFIG_SND_SOC is not set
#
-# SoC Audio support for SuperH
+# ALSA SoC audio for Freescale SOCs
#
#
-# ALSA SoC audio for Freescale SOCs
+# SoC Audio for the Texas Instruments OMAP
#
#
@@ -1543,17 +1553,18 @@
CONFIG_USB_DEVICE_CLASS=y
CONFIG_USB_DYNAMIC_MINORS=y
# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_PERSIST is not set
# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_EHCI_HCD_PPC_OF is not set
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_HCD_PPC_OF is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
@@ -1587,7 +1598,9 @@
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
+CONFIG_USB_STORAGE_ONETOUCH=y
# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
@@ -1642,9 +1655,11 @@
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_MOTOROLA is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
@@ -1695,14 +1710,12 @@
# CONFIG_LEDS_TRIGGER_TIMER is not set
CONFIG_LEDS_TRIGGER_IDE_DISK=y
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -1786,13 +1799,11 @@
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
@@ -1877,9 +1888,10 @@
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
@@ -1901,6 +1913,7 @@
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -1911,6 +1924,7 @@
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
@@ -1923,6 +1937,7 @@
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
@@ -1936,6 +1951,7 @@
CONFIG_XMON=y
CONFIG_XMON_DEFAULT=y
CONFIG_XMON_DISASSEMBLY=y
+CONFIG_IRQSTACKS=y
# CONFIG_BDI_SWITCH is not set
CONFIG_BOOTX_TEXT=y
# CONFIG_PPC_EARLY_DEBUG is not set
@@ -1947,54 +1963,84 @@
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_BLKCIPHER=y
-# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_NULL=m
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=y
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
-CONFIG_CRYPTO_NULL=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
-# CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig
index 970282b..40f84fa 100644
--- a/arch/powerpc/configs/ppc64_defconfig
+++ b/arch/powerpc/configs/ppc64_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Thu Mar 27 13:56:24 2008
+# Linux kernel version: 2.6.26-rc3
+# Tue May 20 20:03:02 2008
#
CONFIG_PPC64=y
@@ -30,6 +30,9 @@
CONFIG_GENERIC_HARDIRQS=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_ARCH_HAS_ILOG2_U64=y
@@ -82,6 +85,7 @@
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
# CONFIG_CGROUP_NS is not set
+# CONFIG_CGROUP_DEVICE is not set
CONFIG_CPUSETS=y
# CONFIG_GROUP_SCHED is not set
# CONFIG_CGROUP_CPUACCT is not set
@@ -101,6 +105,7 @@
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -108,6 +113,7 @@
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
@@ -129,12 +135,14 @@
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
@@ -194,11 +202,11 @@
CONFIG_PPC_PASEMI_IOMMU=y
# CONFIG_PPC_PASEMI_IOMMU_DMA_FORCE is not set
CONFIG_PPC_PASEMI_MDIO=y
-CONFIG_PPC_CELLEB=y
# CONFIG_PPC_PS3 is not set
CONFIG_PPC_CELL=y
CONFIG_PPC_CELL_NATIVE=y
CONFIG_PPC_IBM_CELL_BLADE=y
+CONFIG_PPC_CELLEB=y
#
# Cell Broadband Engine options
@@ -241,6 +249,7 @@
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
@@ -277,7 +286,6 @@
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
-CONFIG_FORCE_MAX_ZONEORDER=13
CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
CONFIG_IOMMU_VMERGE=y
CONFIG_IOMMU_HELPER=y
@@ -307,6 +315,7 @@
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG_SPARSE=y
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
@@ -314,6 +323,7 @@
CONFIG_ARCH_MEMORY_PROBE=y
CONFIG_PPC_HAS_HASH_64K=y
# CONFIG_PPC_64K_PAGES is not set
+CONFIG_FORCE_MAX_ZONEORDER=13
# CONFIG_SCHED_SMT is not set
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
@@ -356,7 +366,10 @@
# CONFIG_HOTPLUG_PCI_SHPC is not set
CONFIG_HOTPLUG_PCI_RPA=m
CONFIG_HOTPLUG_PCI_RPA_DLPAR=m
+# CONFIG_HAS_RAPIDIO is not set
+CONFIG_PAGE_OFFSET=0xc000000000000000
CONFIG_KERNEL_START=0xc000000000000000
+CONFIG_PHYSICAL_START=0x00000000
#
# Networking
@@ -406,8 +419,6 @@
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
@@ -423,6 +434,7 @@
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_EVENTS=y
+# CONFIG_NF_CT_PROTO_DCCP is not set
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
# CONFIG_NF_CT_PROTO_UDPLITE is not set
@@ -501,6 +513,7 @@
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
@@ -571,6 +584,7 @@
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=y
@@ -618,7 +632,6 @@
#
# IDE chipset support/bugfixes
#
-CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_PLATFORM is not set
CONFIG_BLK_DEV_IDEDMA_SFF=y
@@ -661,7 +674,7 @@
CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y
CONFIG_BLK_DEV_IDEDMA_PMAC=y
CONFIG_BLK_DEV_IDEDMA=y
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
+# CONFIG_BLK_DEV_HD_ONLY is not set
# CONFIG_BLK_DEV_HD is not set
#
@@ -747,64 +760,10 @@
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
CONFIG_ATA=y
CONFIG_ATA_NONSTANDARD=y
+CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
-CONFIG_SATA_SVW=y
-# CONFIG_ATA_PIIX is not set
-CONFIG_SATA_MV=y
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
CONFIG_SATA_SIL24=y
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-CONFIG_PATA_PCMCIA=y
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_VIA is not set
-CONFIG_PATA_WINBOND=y
-CONFIG_PATA_PLATFORM=y
-# CONFIG_PATA_OF_PLATFORM is not set
-CONFIG_PATA_SCC=y
+# CONFIG_ATA_SFF is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=y
@@ -866,6 +825,7 @@
CONFIG_WINDFARM_PM81=y
CONFIG_WINDFARM_PM91=y
CONFIG_WINDFARM_PM112=y
+CONFIG_WINDFARM_PM121=y
# CONFIG_PMAC_RACKMETER is not set
CONFIG_NETDEVICES=y
# CONFIG_NETDEVICES_MULTIQUEUE is not set
@@ -911,7 +871,6 @@
CONFIG_IBM_NEW_EMAC_EMAC4=y
CONFIG_NET_PCI=y
CONFIG_PCNET32=y
-# CONFIG_PCNET32_NAPI is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
@@ -947,7 +906,6 @@
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
# CONFIG_BNX2 is not set
@@ -969,6 +927,7 @@
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
CONFIG_TR=y
CONFIG_IBMOL=y
# CONFIG_3C359 is not set
@@ -979,6 +938,7 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
@@ -1083,6 +1043,7 @@
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
@@ -1121,8 +1082,6 @@
CONFIG_HVCS=m
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-CONFIG_GEN_RTC=y
-# CONFIG_GEN_RTC_X is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
@@ -1141,13 +1100,7 @@
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
-
-#
-# I2C Algorithms
-#
CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
#
# I2C Hardware Bus support
@@ -1177,6 +1130,7 @@
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
@@ -1186,19 +1140,13 @@
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
@@ -1215,12 +1163,22 @@
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
@@ -1240,8 +1198,8 @@
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
CONFIG_FB_MACMODES=y
CONFIG_FB_BACKLIGHT=y
@@ -1363,6 +1321,7 @@
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
@@ -1455,11 +1414,11 @@
# CONFIG_SND_SOC is not set
#
-# SoC Audio support for SuperH
+# ALSA SoC audio for Freescale SOCs
#
#
-# ALSA SoC audio for Freescale SOCs
+# SoC Audio for the Texas Instruments OMAP
#
#
@@ -1497,12 +1456,14 @@
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
# CONFIG_USB_EHCI_HCD_PPC_OF is not set
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_HCD_PPC_OF is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
@@ -1538,6 +1499,7 @@
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
@@ -1579,6 +1541,7 @@
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
CONFIG_INFINIBAND=m
# CONFIG_INFINIBAND_USER_MAD is not set
# CONFIG_INFINIBAND_USER_ACCESS is not set
@@ -1607,10 +1570,6 @@
# CONFIG_EDAC_CELL is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-
-#
-# Conflicting RTC option has been selected, check GEN_RTC and RTC
-#
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
@@ -1659,10 +1618,6 @@
# on-CPU RTC drivers
#
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -1696,9 +1651,9 @@
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
# CONFIG_XFS_QUOTA is not set
-CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
@@ -1764,13 +1719,11 @@
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
@@ -1862,9 +1815,10 @@
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
@@ -1888,6 +1842,7 @@
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
@@ -1898,18 +1853,23 @@
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
@@ -1941,53 +1901,83 @@
CONFIG_ASYNC_MEMCPY=y
CONFIG_ASYNC_XOR=y
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_SEQIV=m
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_SEQIV=m
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CTR=m
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
-CONFIG_CRYPTO_NULL=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-CONFIG_CRYPTO_CTR=m
-CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_CCM=m
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-# CONFIG_CRYPTO_SEED is not set
CONFIG_CRYPTO_SALSA20=m
+# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_CAMELLIA is not set
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_LZO=m
# CONFIG_CRYPTO_HW is not set
# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig
index 3e2593c..adaa05f 100644
--- a/arch/powerpc/configs/pseries_defconfig
+++ b/arch/powerpc/configs/pseries_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Thu Mar 27 13:56:28 2008
+# Linux kernel version: 2.6.26-rc3
+# Tue May 20 20:03:28 2008
#
CONFIG_PPC64=y
@@ -30,6 +30,9 @@
CONFIG_GENERIC_HARDIRQS=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_ARCH_HAS_ILOG2_U64=y
@@ -81,6 +84,7 @@
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
CONFIG_CGROUP_NS=y
+CONFIG_CGROUP_DEVICE=y
CONFIG_CPUSETS=y
# CONFIG_GROUP_SCHED is not set
CONFIG_CGROUP_CPUACCT=y
@@ -100,6 +104,7 @@
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -107,6 +112,7 @@
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_PCSPKR_PLATFORM=y
# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
@@ -129,12 +135,14 @@
CONFIG_KRETPROBES=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
@@ -178,11 +186,11 @@
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_MAPLE is not set
# CONFIG_PPC_PASEMI is not set
-# CONFIG_PPC_CELLEB is not set
# CONFIG_PPC_PS3 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PPC_IBM_CELL_BLADE is not set
+# CONFIG_PPC_CELLEB is not set
# CONFIG_PQ2ADS is not set
CONFIG_PPC_NATIVE=y
# CONFIG_UDBG_RTAS_CONSOLE is not set
@@ -225,7 +233,6 @@
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
-CONFIG_FORCE_MAX_ZONEORDER=13
CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
CONFIG_IOMMU_VMERGE=y
CONFIG_IOMMU_HELPER=y
@@ -255,6 +262,7 @@
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
# CONFIG_MEMORY_HOTPLUG is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_RESOURCES_64BIT=y
@@ -263,6 +271,7 @@
CONFIG_NODES_SPAN_OTHER_NODES=y
# CONFIG_PPC_HAS_HASH_64K is not set
# CONFIG_PPC_64K_PAGES is not set
+CONFIG_FORCE_MAX_ZONEORDER=13
CONFIG_SCHED_SMT=y
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
@@ -291,7 +300,10 @@
# CONFIG_HOTPLUG_PCI_SHPC is not set
CONFIG_HOTPLUG_PCI_RPA=m
CONFIG_HOTPLUG_PCI_RPA_DLPAR=m
+# CONFIG_HAS_RAPIDIO is not set
+CONFIG_PAGE_OFFSET=0xc000000000000000
CONFIG_KERNEL_START=0xc000000000000000
+CONFIG_PHYSICAL_START=0x00000000
#
# Networking
@@ -338,8 +350,6 @@
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
@@ -355,6 +365,7 @@
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_EVENTS=y
+# CONFIG_NF_CT_PROTO_DCCP is not set
# CONFIG_NF_CT_PROTO_SCTP is not set
CONFIG_NF_CT_PROTO_UDPLITE=m
# CONFIG_NF_CONNTRACK_AMANDA is not set
@@ -426,6 +437,7 @@
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
@@ -492,6 +504,7 @@
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
+CONFIG_OF_I2C=y
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
# CONFIG_PARPORT_SERIAL is not set
@@ -545,7 +558,6 @@
#
# IDE chipset support/bugfixes
#
-CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_PLATFORM is not set
CONFIG_BLK_DEV_IDEDMA_SFF=y
@@ -584,7 +596,7 @@
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
CONFIG_BLK_DEV_IDEDMA=y
-CONFIG_IDE_ARCH_OBSOLETE_INIT=y
+# CONFIG_BLK_DEV_HD_ONLY is not set
# CONFIG_BLK_DEV_HD is not set
#
@@ -671,61 +683,10 @@
# CONFIG_SCSI_SRP is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_SATA_PMP=y
# CONFIG_SATA_AHCI is not set
-# CONFIG_SATA_SVW is not set
-# CONFIG_ATA_PIIX is not set
-# CONFIG_SATA_MV is not set
-# CONFIG_SATA_NV is not set
-# CONFIG_PDC_ADMA is not set
-# CONFIG_SATA_QSTOR is not set
-# CONFIG_SATA_PROMISE is not set
-# CONFIG_SATA_SX4 is not set
-# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIL24 is not set
-# CONFIG_SATA_SIS is not set
-# CONFIG_SATA_ULI is not set
-# CONFIG_SATA_VIA is not set
-# CONFIG_SATA_VITESSE is not set
-# CONFIG_SATA_INIC162X is not set
-# CONFIG_PATA_ALI is not set
-# CONFIG_PATA_AMD is not set
-# CONFIG_PATA_ARTOP is not set
-# CONFIG_PATA_ATIIXP is not set
-# CONFIG_PATA_CMD640_PCI is not set
-# CONFIG_PATA_CMD64X is not set
-# CONFIG_PATA_CS5520 is not set
-# CONFIG_PATA_CS5530 is not set
-# CONFIG_PATA_CYPRESS is not set
-# CONFIG_PATA_EFAR is not set
-# CONFIG_ATA_GENERIC is not set
-# CONFIG_PATA_HPT366 is not set
-# CONFIG_PATA_HPT37X is not set
-# CONFIG_PATA_HPT3X2N is not set
-# CONFIG_PATA_HPT3X3 is not set
-# CONFIG_PATA_IT821X is not set
-# CONFIG_PATA_IT8213 is not set
-# CONFIG_PATA_JMICRON is not set
-# CONFIG_PATA_TRIFLEX is not set
-# CONFIG_PATA_MARVELL is not set
-# CONFIG_PATA_MPIIX is not set
-# CONFIG_PATA_OLDPIIX is not set
-# CONFIG_PATA_NETCELL is not set
-# CONFIG_PATA_NINJA32 is not set
-# CONFIG_PATA_NS87410 is not set
-# CONFIG_PATA_NS87415 is not set
-# CONFIG_PATA_OPTI is not set
-# CONFIG_PATA_OPTIDMA is not set
-# CONFIG_PATA_PDC_OLD is not set
-# CONFIG_PATA_RADISYS is not set
-# CONFIG_PATA_RZ1000 is not set
-# CONFIG_PATA_SC1200 is not set
-# CONFIG_PATA_SERVERWORKS is not set
-# CONFIG_PATA_PDC2027X is not set
-# CONFIG_PATA_SIL680 is not set
-# CONFIG_PATA_SIS is not set
-# CONFIG_PATA_VIA is not set
-CONFIG_PATA_WINBOND=y
-# CONFIG_PATA_PLATFORM is not set
+# CONFIG_ATA_SFF is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=y
@@ -783,7 +744,6 @@
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=y
-# CONFIG_PCNET32_NAPI is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
@@ -820,7 +780,6 @@
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
# CONFIG_BNX2 is not set
@@ -829,7 +788,6 @@
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
-CONFIG_EHEA=m
# CONFIG_IXGBE is not set
CONFIG_IXGB=m
# CONFIG_IXGB_NAPI is not set
@@ -838,10 +796,10 @@
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
-# CONFIG_PASEMI_MAC is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
CONFIG_TR=y
CONFIG_IBMOL=y
# CONFIG_3C359 is not set
@@ -852,6 +810,7 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
#
# USB Network Adapters
@@ -956,6 +915,7 @@
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
@@ -1000,13 +960,7 @@
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_CHARDEV is not set
-
-#
-# I2C Algorithms
-#
CONFIG_I2C_ALGOBIT=y
-# CONFIG_I2C_ALGOPCF is not set
-# CONFIG_I2C_ALGOPCA is not set
#
# I2C Hardware Bus support
@@ -1035,6 +989,7 @@
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
#
# Miscellaneous I2C Chip support
@@ -1044,19 +999,13 @@
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
@@ -1073,12 +1022,22 @@
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
@@ -1098,8 +1057,8 @@
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
CONFIG_FB_MACMODES=y
CONFIG_FB_BACKLIGHT=y
@@ -1209,11 +1168,13 @@
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_EHCI_HCD_PPC_OF is not set
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_HCD_PPC_OF is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
@@ -1247,7 +1208,9 @@
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
+CONFIG_USB_STORAGE_ONETOUCH=y
# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
@@ -1290,6 +1253,7 @@
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
CONFIG_INFINIBAND=m
CONFIG_INFINIBAND_USER_MAD=m
CONFIG_INFINIBAND_USER_ACCESS=m
@@ -1312,10 +1276,6 @@
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -1349,11 +1309,12 @@
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
# CONFIG_XFS_QUOTA is not set
-CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
# CONFIG_GFS2_FS is not set
CONFIG_OCFS2_FS=m
+CONFIG_OCFS2_FS_O2CB=m
CONFIG_OCFS2_DEBUG_MASKLOG=y
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
@@ -1419,13 +1380,11 @@
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
-CONFIG_NFSD_TCP=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
@@ -1500,9 +1459,10 @@
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
@@ -1526,6 +1486,7 @@
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
@@ -1536,18 +1497,23 @@
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
@@ -1577,53 +1543,83 @@
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_SEQIV=m
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+# CONFIG_CRYPTO_CRYPTD is not set
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_SEQIV=m
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CTR=m
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
-CONFIG_CRYPTO_NULL=m
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-CONFIG_CRYPTO_CTR=m
-CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_CCM=m
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
-CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
CONFIG_CRYPTO_AES=m
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+# CONFIG_CRYPTO_CAMELLIA is not set
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
-# CONFIG_CRYPTO_SEED is not set
CONFIG_CRYPTO_SALSA20=m
+# CONFIG_CRYPTO_SEED is not set
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_CRC32C=m
-# CONFIG_CRYPTO_CAMELLIA is not set
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_LZO=m
# CONFIG_CRYPTO_HW is not set
# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index d14cebf..2346d27 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -105,6 +105,9 @@
systbl_chk: $(src)/systbl_chk.sh $(obj)/systbl_chk.i
$(call cmd,systbl_chk)
+
+ifeq ($(CONFIG_PPC_MERGE),y)
+
$(obj)/built-in.o: prom_init_check
quiet_cmd_prom_init_check = CALL $<
@@ -114,4 +117,7 @@
prom_init_check: $(src)/prom_init_check.sh $(obj)/prom_init.o
$(call cmd,prom_init_check)
+endif
+
+
clean-files := vmlinux.lds
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index 81738a4..e44d553 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -1484,6 +1484,7 @@
.dcache_bsize = 32,
.machine_check = machine_check_e200,
.platform = "ppc5554",
+ }
#endif /* CONFIG_E200 */
#ifdef CONFIG_E500
{ /* e500 */
@@ -1533,6 +1534,7 @@
.dcache_bsize = 32,
.machine_check = machine_check_e500,
.platform = "powerpc",
+ }
#endif /* CONFIG_E500 */
#endif /* CONFIG_PPC32 */
};
diff --git a/arch/powerpc/kernel/init_task.c b/arch/powerpc/kernel/init_task.c
index 941043a..4c85b8d 100644
--- a/arch/powerpc/kernel/init_task.c
+++ b/arch/powerpc/kernel/init_task.c
@@ -8,7 +8,6 @@
#include <asm/uaccess.h>
static struct fs_struct init_fs = INIT_FS;
-static struct files_struct init_files = INIT_FILES;
static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
struct mm_struct init_mm = INIT_MM(init_mm);
diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c
index 5275074..30eedfc 100644
--- a/arch/powerpc/kernel/pci_64.c
+++ b/arch/powerpc/kernel/pci_64.c
@@ -189,7 +189,7 @@
dev->cfg_size = pci_cfg_space_size(dev);
- sprintf(pci_name(dev), "%04x:%02x:%02x.%d", pci_domain_nr(bus),
+ dev_set_name(&dev->dev, "%04x:%02x:%02x.%d", pci_domain_nr(bus),
dev->bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn));
dev->class = get_int_prop(node, "class-code", 0);
dev->revision = get_int_prop(node, "revision-id", 0);
diff --git a/arch/powerpc/kernel/prom_init_check.sh b/arch/powerpc/kernel/prom_init_check.sh
index 8e24fc1..31729a9 100644
--- a/arch/powerpc/kernel/prom_init_check.sh
+++ b/arch/powerpc/kernel/prom_init_check.sh
@@ -20,7 +20,7 @@
_end enter_prom memcpy memset reloc_offset __secondary_hold
__secondary_hold_acknowledge __secondary_hold_spinloop __start
strcmp strcpy strlcpy strlen strncmp strstr logo_linux_clut224
-reloc_got2"
+reloc_got2 kernstart_addr"
NM="$1"
OBJ="$2"
diff --git a/arch/powerpc/kernel/signal_64.c b/arch/powerpc/kernel/signal_64.c
index faeb8f2..da7c058 100644
--- a/arch/powerpc/kernel/signal_64.c
+++ b/arch/powerpc/kernel/signal_64.c
@@ -87,6 +87,7 @@
#ifdef CONFIG_ALTIVEC
elf_vrreg_t __user *v_regs = (elf_vrreg_t __user *)(((unsigned long)sc->vmx_reserve + 15) & ~0xful);
#endif
+ unsigned long msr = regs->msr;
long err = 0;
flush_fp_to_thread(current);
@@ -102,7 +103,7 @@
/* set MSR_VEC in the MSR value in the frame to indicate that sc->v_reg)
* contains valid data.
*/
- regs->msr |= MSR_VEC;
+ msr |= MSR_VEC;
}
/* We always copy to/from vrsave, it's 0 if we don't have or don't
* use altivec.
@@ -114,6 +115,7 @@
err |= __put_user(&sc->gp_regs, &sc->regs);
WARN_ON(!FULL_REGS(regs));
err |= __copy_to_user(&sc->gp_regs, regs, GP_REGS_SIZE);
+ err |= __put_user(msr, &sc->gp_regs[PT_MSR]);
err |= __copy_to_user(&sc->fp_regs, ¤t->thread.fpr, FP_REGS_SIZE);
err |= __put_user(signr, &sc->signal);
err |= __put_user(handler, &sc->handler);
diff --git a/arch/powerpc/kvm/44x_tlb.c b/arch/powerpc/kvm/44x_tlb.c
index f5d7a5e..75dff7c 100644
--- a/arch/powerpc/kvm/44x_tlb.c
+++ b/arch/powerpc/kvm/44x_tlb.c
@@ -116,8 +116,6 @@
struct tlbe *stlbe = &vcpu->arch.shadow_tlb[index];
struct page *page = vcpu->arch.shadow_pages[index];
- kunmap(vcpu->arch.shadow_pages[index]);
-
if (get_tlb_v(stlbe)) {
if (kvmppc_44x_tlbe_is_writable(stlbe))
kvm_release_page_dirty(page);
@@ -144,18 +142,19 @@
stlbe = &vcpu->arch.shadow_tlb[victim];
/* Get reference to new page. */
- down_write(¤t->mm->mmap_sem);
+ down_read(¤t->mm->mmap_sem);
new_page = gfn_to_page(vcpu->kvm, gfn);
if (is_error_page(new_page)) {
- printk(KERN_ERR "Couldn't get guest page!\n");
+ printk(KERN_ERR "Couldn't get guest page for gfn %lx!\n", gfn);
kvm_release_page_clean(new_page);
+ up_read(¤t->mm->mmap_sem);
return;
}
hpaddr = page_to_phys(new_page);
/* Drop reference to old page. */
kvmppc_44x_shadow_release(vcpu, victim);
- up_write(¤t->mm->mmap_sem);
+ up_read(¤t->mm->mmap_sem);
vcpu->arch.shadow_pages[victim] = new_page;
diff --git a/arch/powerpc/kvm/booke_guest.c b/arch/powerpc/kvm/booke_guest.c
index 712d89a..9c8ad85 100644
--- a/arch/powerpc/kvm/booke_guest.c
+++ b/arch/powerpc/kvm/booke_guest.c
@@ -227,39 +227,6 @@
}
}
-static int kvmppc_emulate_mmio(struct kvm_run *run, struct kvm_vcpu *vcpu)
-{
- enum emulation_result er;
- int r;
-
- er = kvmppc_emulate_instruction(run, vcpu);
- switch (er) {
- case EMULATE_DONE:
- /* Future optimization: only reload non-volatiles if they were
- * actually modified. */
- r = RESUME_GUEST_NV;
- break;
- case EMULATE_DO_MMIO:
- run->exit_reason = KVM_EXIT_MMIO;
- /* We must reload nonvolatiles because "update" load/store
- * instructions modify register state. */
- /* Future optimization: only reload non-volatiles if they were
- * actually modified. */
- r = RESUME_HOST_NV;
- break;
- case EMULATE_FAIL:
- /* XXX Deliver Program interrupt to guest. */
- printk(KERN_EMERG "%s: emulation failed (%08x)\n", __func__,
- vcpu->arch.last_inst);
- r = RESUME_HOST;
- break;
- default:
- BUG();
- }
-
- return r;
-}
-
/**
* kvmppc_handle_exit
*
diff --git a/arch/powerpc/kvm/emulate.c b/arch/powerpc/kvm/emulate.c
index a03fe0c..0000974 100644
--- a/arch/powerpc/kvm/emulate.c
+++ b/arch/powerpc/kvm/emulate.c
@@ -246,6 +246,11 @@
case 31:
switch (get_xop(inst)) {
+ case 23: /* lwzx */
+ rt = get_rt(inst);
+ emulated = kvmppc_handle_load(run, vcpu, rt, 4, 1);
+ break;
+
case 83: /* mfmsr */
rt = get_rt(inst);
vcpu->arch.gpr[rt] = vcpu->arch.msr;
@@ -267,6 +272,13 @@
kvmppc_set_msr(vcpu, vcpu->arch.gpr[rs]);
break;
+ case 151: /* stwx */
+ rs = get_rs(inst);
+ emulated = kvmppc_handle_store(run, vcpu,
+ vcpu->arch.gpr[rs],
+ 4, 1);
+ break;
+
case 163: /* wrteei */
vcpu->arch.msr = (vcpu->arch.msr & ~MSR_EE)
| (inst & MSR_EE);
diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile
index f1d2cdc..c71d37d 100644
--- a/arch/powerpc/lib/Makefile
+++ b/arch/powerpc/lib/Makefile
@@ -10,6 +10,7 @@
obj-y := string.o alloc.o \
checksum_$(CONFIG_WORD_SIZE).o
obj-$(CONFIG_PPC32) += div64.o copy_32.o
+obj-$(CONFIG_HAS_IOMEM) += devres.o
endif
obj-$(CONFIG_PPC64) += copypage_64.o copyuser_64.o \
@@ -23,4 +24,3 @@
endif
obj-$(CONFIG_PPC_LIB_RHEAP) += rheap.o
-obj-$(CONFIG_HAS_IOMEM) += devres.o
diff --git a/arch/powerpc/mm/hash_low_32.S b/arch/powerpc/mm/hash_low_32.S
index ddeaf9e..b9ba7d9 100644
--- a/arch/powerpc/mm/hash_low_32.S
+++ b/arch/powerpc/mm/hash_low_32.S
@@ -1,6 +1,4 @@
/*
- * $Id: hashtable.S,v 1.6 1999/10/08 01:56:15 paulus Exp $
- *
* PowerPC version
* Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
* Rewritten by Cort Dougan (cort@cs.nmt.edu) for PReP
diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c
index 2b5a399..0f2d239 100644
--- a/arch/powerpc/mm/hash_utils_64.c
+++ b/arch/powerpc/mm/hash_utils_64.c
@@ -94,6 +94,9 @@
int mmu_linear_psize = MMU_PAGE_4K;
int mmu_virtual_psize = MMU_PAGE_4K;
int mmu_vmalloc_psize = MMU_PAGE_4K;
+#ifdef CONFIG_SPARSEMEM_VMEMMAP
+int mmu_vmemmap_psize = MMU_PAGE_4K;
+#endif
int mmu_io_psize = MMU_PAGE_4K;
int mmu_kernel_ssize = MMU_SEGSIZE_256M;
int mmu_highuser_ssize = MMU_SEGSIZE_256M;
@@ -387,11 +390,32 @@
}
#endif /* CONFIG_PPC_64K_PAGES */
+#ifdef CONFIG_SPARSEMEM_VMEMMAP
+ /* We try to use 16M pages for vmemmap if that is supported
+ * and we have at least 1G of RAM at boot
+ */
+ if (mmu_psize_defs[MMU_PAGE_16M].shift &&
+ lmb_phys_mem_size() >= 0x40000000)
+ mmu_vmemmap_psize = MMU_PAGE_16M;
+ else if (mmu_psize_defs[MMU_PAGE_64K].shift)
+ mmu_vmemmap_psize = MMU_PAGE_64K;
+ else
+ mmu_vmemmap_psize = MMU_PAGE_4K;
+#endif /* CONFIG_SPARSEMEM_VMEMMAP */
+
printk(KERN_DEBUG "Page orders: linear mapping = %d, "
- "virtual = %d, io = %d\n",
+ "virtual = %d, io = %d"
+#ifdef CONFIG_SPARSEMEM_VMEMMAP
+ ", vmemmap = %d"
+#endif
+ "\n",
mmu_psize_defs[mmu_linear_psize].shift,
mmu_psize_defs[mmu_virtual_psize].shift,
- mmu_psize_defs[mmu_io_psize].shift);
+ mmu_psize_defs[mmu_io_psize].shift
+#ifdef CONFIG_SPARSEMEM_VMEMMAP
+ ,mmu_psize_defs[mmu_vmemmap_psize].shift
+#endif
+ );
#ifdef CONFIG_HUGETLB_PAGE
/* Init large page size. Currently, we pick 16M or 1M depending
diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c
index c5ac532..6aa6537 100644
--- a/arch/powerpc/mm/init_64.c
+++ b/arch/powerpc/mm/init_64.c
@@ -19,6 +19,8 @@
*
*/
+#undef DEBUG
+
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/kernel.h>
@@ -208,12 +210,12 @@
}
int __meminit vmemmap_populate(struct page *start_page,
- unsigned long nr_pages, int node)
+ unsigned long nr_pages, int node)
{
unsigned long mode_rw;
unsigned long start = (unsigned long)start_page;
unsigned long end = (unsigned long)(start_page + nr_pages);
- unsigned long page_size = 1 << mmu_psize_defs[mmu_linear_psize].shift;
+ unsigned long page_size = 1 << mmu_psize_defs[mmu_vmemmap_psize].shift;
mode_rw = _PAGE_ACCESSED | _PAGE_DIRTY | _PAGE_COHERENT | PP_RWXX;
@@ -235,11 +237,11 @@
start, p, __pa(p));
mapped = htab_bolt_mapping(start, start + page_size,
- __pa(p), mode_rw, mmu_linear_psize,
+ __pa(p), mode_rw, mmu_vmemmap_psize,
mmu_kernel_ssize);
BUG_ON(mapped < 0);
}
return 0;
}
-#endif
+#endif /* CONFIG_SPARSEMEM_VMEMMAP */
diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
index f67e118..51f82d8 100644
--- a/arch/powerpc/mm/mem.c
+++ b/arch/powerpc/mm/mem.c
@@ -151,6 +151,7 @@
return ret;
}
#endif /* CONFIG_MEMORY_HOTREMOVE */
+#endif /* CONFIG_MEMORY_HOTPLUG */
/*
* walk_memory_resource() needs to make sure there is no holes in a given
@@ -184,8 +185,6 @@
}
EXPORT_SYMBOL_GPL(walk_memory_resource);
-#endif /* CONFIG_MEMORY_HOTPLUG */
-
void show_mem(void)
{
unsigned long total = 0, reserved = 0;
diff --git a/arch/powerpc/mm/pgtable_32.c b/arch/powerpc/mm/pgtable_32.c
index 80d1bab..e0ff59f 100644
--- a/arch/powerpc/mm/pgtable_32.c
+++ b/arch/powerpc/mm/pgtable_32.c
@@ -402,7 +402,7 @@
return;
}
- map_page(address, phys, flags);
+ map_page(address, phys, pgprot_val(flags));
fixmaps++;
}
diff --git a/arch/powerpc/mm/slb.c b/arch/powerpc/mm/slb.c
index cf8705e..89497fb 100644
--- a/arch/powerpc/mm/slb.c
+++ b/arch/powerpc/mm/slb.c
@@ -28,7 +28,7 @@
#include <asm/udbg.h>
#ifdef DEBUG
-#define DBG(fmt...) udbg_printf(fmt)
+#define DBG(fmt...) printk(fmt)
#else
#define DBG pr_debug
#endif
@@ -263,13 +263,19 @@
extern unsigned int *slb_miss_kernel_load_linear;
extern unsigned int *slb_miss_kernel_load_io;
extern unsigned int *slb_compare_rr_to_size;
+#ifdef CONFIG_SPARSEMEM_VMEMMAP
+ extern unsigned int *slb_miss_kernel_load_vmemmap;
+ unsigned long vmemmap_llp;
+#endif
/* Prepare our SLB miss handler based on our page size */
linear_llp = mmu_psize_defs[mmu_linear_psize].sllp;
io_llp = mmu_psize_defs[mmu_io_psize].sllp;
vmalloc_llp = mmu_psize_defs[mmu_vmalloc_psize].sllp;
get_paca()->vmalloc_sllp = SLB_VSID_KERNEL | vmalloc_llp;
-
+#ifdef CONFIG_SPARSEMEM_VMEMMAP
+ vmemmap_llp = mmu_psize_defs[mmu_vmemmap_psize].sllp;
+#endif
if (!slb_encoding_inited) {
slb_encoding_inited = 1;
patch_slb_encoding(slb_miss_kernel_load_linear,
@@ -281,6 +287,12 @@
DBG("SLB: linear LLP = %04lx\n", linear_llp);
DBG("SLB: io LLP = %04lx\n", io_llp);
+
+#ifdef CONFIG_SPARSEMEM_VMEMMAP
+ patch_slb_encoding(slb_miss_kernel_load_vmemmap,
+ SLB_VSID_KERNEL | vmemmap_llp);
+ DBG("SLB: vmemmap LLP = %04lx\n", vmemmap_llp);
+#endif
}
get_paca()->stab_rr = SLB_NUM_BOLTED;
diff --git a/arch/powerpc/mm/slb_low.S b/arch/powerpc/mm/slb_low.S
index 657f6b3..bc44dc4 100644
--- a/arch/powerpc/mm/slb_low.S
+++ b/arch/powerpc/mm/slb_low.S
@@ -47,8 +47,7 @@
* it to VSID 0, which is reserved as a bad VSID - one which
* will never have any pages in it. */
- /* Check if hitting the linear mapping of the vmalloc/ioremap
- * kernel space
+ /* Check if hitting the linear mapping or some other kernel space
*/
bne cr7,1f
@@ -62,7 +61,18 @@
END_FTR_SECTION_IFCLR(CPU_FTR_1T_SEGMENT)
b slb_finish_load_1T
-1: /* vmalloc/ioremap mapping encoding bits, the "li" instructions below
+1:
+#ifdef CONFIG_SPARSEMEM_VMEMMAP
+ /* Check virtual memmap region. To be patches at kernel boot */
+ cmpldi cr0,r9,0xf
+ bne 1f
+_GLOBAL(slb_miss_kernel_load_vmemmap)
+ li r11,0
+ b 6f
+1:
+#endif /* CONFIG_SPARSEMEM_VMEMMAP */
+
+ /* vmalloc/ioremap mapping encoding bits, the "li" instructions below
* will be patched by the kernel at boot
*/
BEGIN_FTR_SECTION
diff --git a/arch/powerpc/platforms/52xx/mpc52xx_gpio.c b/arch/powerpc/platforms/52xx/mpc52xx_gpio.c
index 48da5df..8a455eb 100644
--- a/arch/powerpc/platforms/52xx/mpc52xx_gpio.c
+++ b/arch/powerpc/platforms/52xx/mpc52xx_gpio.c
@@ -100,7 +100,7 @@
struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
struct mpc52xx_gpiochip *chip = container_of(mm_gc,
struct mpc52xx_gpiochip, mmchip);
- struct mpc52xx_gpio_wkup *regs = mm_gc->regs;
+ struct mpc52xx_gpio_wkup __iomem *regs = mm_gc->regs;
unsigned long flags;
spin_lock_irqsave(&gpio_lock, flags);
@@ -122,7 +122,7 @@
mpc52xx_wkup_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
{
struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
- struct mpc52xx_gpio_wkup *regs = mm_gc->regs;
+ struct mpc52xx_gpio_wkup __iomem *regs = mm_gc->regs;
struct mpc52xx_gpiochip *chip = container_of(mm_gc,
struct mpc52xx_gpiochip, mmchip);
unsigned long flags;
@@ -150,7 +150,7 @@
const struct of_device_id *match)
{
struct mpc52xx_gpiochip *chip;
- struct mpc52xx_gpio_wkup *regs;
+ struct mpc52xx_gpio_wkup __iomem *regs;
struct of_gpio_chip *ofchip;
int ret;
@@ -260,7 +260,7 @@
struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
struct mpc52xx_gpiochip *chip = container_of(mm_gc,
struct mpc52xx_gpiochip, mmchip);
- struct mpc52xx_gpio *regs = mm_gc->regs;
+ struct mpc52xx_gpio __iomem *regs = mm_gc->regs;
unsigned long flags;
spin_lock_irqsave(&gpio_lock, flags);
@@ -284,7 +284,7 @@
struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
struct mpc52xx_gpiochip *chip = container_of(mm_gc,
struct mpc52xx_gpiochip, mmchip);
- struct mpc52xx_gpio *regs = mm_gc->regs;
+ struct mpc52xx_gpio __iomem *regs = mm_gc->regs;
unsigned long flags;
spin_lock_irqsave(&gpio_lock, flags);
@@ -312,7 +312,7 @@
{
struct mpc52xx_gpiochip *chip;
struct of_gpio_chip *ofchip;
- struct mpc52xx_gpio *regs;
+ struct mpc52xx_gpio __iomem *regs;
int ret;
chip = kzalloc(sizeof(*chip), GFP_KERNEL);
@@ -387,7 +387,7 @@
static int mpc52xx_gpt_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio)
{
struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
- struct mpc52xx_gpt *regs = mm_gc->regs;
+ struct mpc52xx_gpt __iomem *regs = mm_gc->regs;
out_be32(®s->mode, 0x04);
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
index 25f8bc7..43a459f 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
@@ -32,6 +32,7 @@
#include <linux/fsl_devices.h>
#include <linux/of_platform.h>
#include <linux/of_device.h>
+#include <linux/phy.h>
#include <asm/system.h>
#include <asm/atomic.h>
@@ -56,6 +57,95 @@
#define DBG(fmt...)
#endif
+#define MV88E1111_SCR 0x10
+#define MV88E1111_SCR_125CLK 0x0010
+static int mpc8568_fixup_125_clock(struct phy_device *phydev)
+{
+ int scr;
+ int err;
+
+ /* Workaround for the 125 CLK Toggle */
+ scr = phy_read(phydev, MV88E1111_SCR);
+
+ if (scr < 0)
+ return scr;
+
+ err = phy_write(phydev, MV88E1111_SCR, scr & ~(MV88E1111_SCR_125CLK));
+
+ if (err)
+ return err;
+
+ err = phy_write(phydev, MII_BMCR, BMCR_RESET);
+
+ if (err)
+ return err;
+
+ scr = phy_read(phydev, MV88E1111_SCR);
+
+ if (scr < 0)
+ return err;
+
+ err = phy_write(phydev, MV88E1111_SCR, scr | 0x0008);
+
+ return err;
+}
+
+static int mpc8568_mds_phy_fixups(struct phy_device *phydev)
+{
+ int temp;
+ int err;
+
+ /* Errata */
+ err = phy_write(phydev,29, 0x0006);
+
+ if (err)
+ return err;
+
+ temp = phy_read(phydev, 30);
+
+ if (temp < 0)
+ return temp;
+
+ temp = (temp & (~0x8000)) | 0x4000;
+ err = phy_write(phydev,30, temp);
+
+ if (err)
+ return err;
+
+ err = phy_write(phydev,29, 0x000a);
+
+ if (err)
+ return err;
+
+ temp = phy_read(phydev, 30);
+
+ if (temp < 0)
+ return temp;
+
+ temp = phy_read(phydev, 30);
+
+ if (temp < 0)
+ return temp;
+
+ temp &= ~0x0020;
+
+ err = phy_write(phydev,30,temp);
+
+ if (err)
+ return err;
+
+ /* Disable automatic MDI/MDIX selection */
+ temp = phy_read(phydev, 16);
+
+ if (temp < 0)
+ return temp;
+
+ temp &= ~0x0060;
+ err = phy_write(phydev,16,temp);
+
+ return err;
+}
+
/* ************************************************************************
*
* Setup the architecture
@@ -64,7 +154,7 @@
static void __init mpc85xx_mds_setup_arch(void)
{
struct device_node *np;
- static u8 *bcsr_regs = NULL;
+ static u8 __iomem *bcsr_regs = NULL;
if (ppc_md.progress)
ppc_md.progress("mpc85xx_mds_setup_arch()", 0);
@@ -138,6 +228,35 @@
#endif /* CONFIG_QUICC_ENGINE */
}
+
+static int __init board_fixups(void)
+{
+ char phy_id[BUS_ID_SIZE];
+ char *compstrs[2] = {"fsl,gianfar-mdio", "fsl,ucc-mdio"};
+ struct device_node *mdio;
+ struct resource res;
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(compstrs); i++) {
+ mdio = of_find_compatible_node(NULL, NULL, compstrs[i]);
+
+ of_address_to_resource(mdio, 0, &res);
+ snprintf(phy_id, BUS_ID_SIZE, "%x:%02x", res.start, 1);
+
+ phy_register_fixup_for_id(phy_id, mpc8568_fixup_125_clock);
+ phy_register_fixup_for_id(phy_id, mpc8568_mds_phy_fixups);
+
+ /* Register a workaround for errata */
+ snprintf(phy_id, BUS_ID_SIZE, "%x:%02x", res.start, 7);
+ phy_register_fixup_for_id(phy_id, mpc8568_mds_phy_fixups);
+
+ of_node_put(mdio);
+ }
+
+ return 0;
+}
+machine_arch_initcall(mpc85xx_mds, board_fixups);
+
static struct of_device_id mpc85xx_ids[] = {
{ .type = "soc", },
{ .compatible = "soc", },
diff --git a/arch/powerpc/platforms/85xx/sbc8548.c b/arch/powerpc/platforms/85xx/sbc8548.c
index 488facb..b9246ea 100644
--- a/arch/powerpc/platforms/85xx/sbc8548.c
+++ b/arch/powerpc/platforms/85xx/sbc8548.c
@@ -49,6 +49,8 @@
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
+static int sbc_rev;
+
static void __init sbc8548_pic_init(void)
{
struct mpic *mpic;
@@ -79,6 +81,30 @@
mpic_init(mpic);
}
+/* Extract the HW Rev from the EPLD on the board */
+static int __init sbc8548_hw_rev(void)
+{
+ struct device_node *np;
+ struct resource res;
+ unsigned int *rev;
+ int board_rev = 0;
+
+ np = of_find_compatible_node(NULL, NULL, "hw-rev");
+ if (np == NULL) {
+ printk("No HW-REV found in DTB.\n");
+ return -ENODEV;
+ }
+
+ of_address_to_resource(np, 0, &res);
+ of_node_put(np);
+
+ rev = ioremap(res.start,sizeof(unsigned int));
+ board_rev = (*rev) >> 28;
+ iounmap(rev);
+
+ return board_rev;
+}
+
/*
* Setup the architecture
*/
@@ -104,6 +130,7 @@
}
}
#endif
+ sbc_rev = sbc8548_hw_rev();
}
static void sbc8548_show_cpuinfo(struct seq_file *m)
@@ -115,7 +142,7 @@
svid = mfspr(SPRN_SVR);
seq_printf(m, "Vendor\t\t: Wind River\n");
- seq_printf(m, "Machine\t\t: SBC8548\n");
+ seq_printf(m, "Machine\t\t: SBC8548 v%d\n", sbc_rev);
seq_printf(m, "PVR\t\t: 0x%x\n", pvid);
seq_printf(m, "SVR\t\t: 0x%x\n", svid);
@@ -130,6 +157,7 @@
static struct of_device_id __initdata of_bus_ids[] = {
{ .name = "soc", },
{ .type = "soc", },
+ { .compatible = "simple-bus", },
{},
};
diff --git a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
index 5e1e8cf..dea1320 100644
--- a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
+++ b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c
@@ -43,6 +43,7 @@
static struct of_device_id __initdata mpc8610_ids[] = {
{ .compatible = "fsl,mpc8610-immr", },
+ { .compatible = "simple-bus", },
{}
};
@@ -216,11 +217,21 @@
}
}
+#define PX_BRDCFG0_DVISEL (1 << 3)
+#define PX_BRDCFG0_DLINK (1 << 4)
+#define PX_BRDCFG0_DIU_MASK (PX_BRDCFG0_DVISEL | PX_BRDCFG0_DLINK)
+
void mpc8610hpcd_set_monitor_port(int monitor_port)
{
- static const u8 bdcfg[] = {0xBD, 0xB5, 0xA5};
+ static const u8 bdcfg[] = {
+ PX_BRDCFG0_DVISEL | PX_BRDCFG0_DLINK,
+ PX_BRDCFG0_DLINK,
+ 0,
+ };
+
if (monitor_port < 3)
- *pixis_bdcfg0 = bdcfg[monitor_port];
+ clrsetbits_8(pixis_bdcfg0, PX_BRDCFG0_DIU_MASK,
+ bdcfg[monitor_port]);
}
void mpc8610hpcd_set_pixel_clock(unsigned int pixclock)
diff --git a/arch/powerpc/platforms/cell/celleb_scc_pciex.c b/arch/powerpc/platforms/cell/celleb_scc_pciex.c
index 31da84c..0e04f8f 100644
--- a/arch/powerpc/platforms/cell/celleb_scc_pciex.c
+++ b/arch/powerpc/platforms/cell/celleb_scc_pciex.c
@@ -217,7 +217,7 @@
static void scc_pciex_ins##name(unsigned long p, void *b, unsigned long c) \
{ \
struct iowa_bus *bus = iowa_pio_find_bus(p); \
- u##size *dst = b; \
+ __le##size *dst = b; \
for (; c != 0; c--, dst++) \
*dst = cpu_to_le##size(__scc_pciex_in##name(bus->phb, p)); \
scc_pciex_io_flush(bus); \
@@ -231,10 +231,11 @@
unsigned long c) \
{ \
struct iowa_bus *bus = iowa_pio_find_bus(p); \
- const u##size *src = b; \
+ const __le##size *src = b; \
for (; c != 0; c--, src++) \
__scc_pciex_out##name(bus->phb, le##size##_to_cpu(*src), p); \
}
+#define __le8 u8
#define cpu_to_le8(x) (x)
#define le8_to_cpu(x) (x)
PCIEX_PIO_FUNC(8, b)
diff --git a/arch/powerpc/platforms/cell/io-workarounds.c b/arch/powerpc/platforms/cell/io-workarounds.c
index 3b84e8b..b5f84e8 100644
--- a/arch/powerpc/platforms/cell/io-workarounds.c
+++ b/arch/powerpc/platforms/cell/io-workarounds.c
@@ -118,7 +118,7 @@
#undef DEF_PCI_AC_RET
#undef DEF_PCI_AC_NORET
-static struct ppc_pci_io __initdata iowa_pci_io = {
+static const struct ppc_pci_io __devinitconst iowa_pci_io = {
#define DEF_PCI_AC_RET(name, ret, at, al, space, aa) .name = iowa_##name,
#define DEF_PCI_AC_NORET(name, at, al, space, aa) .name = iowa_##name,
@@ -146,7 +146,7 @@
}
/* Regist new bus to support workaround */
-void __init iowa_register_bus(struct pci_controller *phb,
+void __devinit iowa_register_bus(struct pci_controller *phb,
struct ppc_pci_io *ops,
int (*initfunc)(struct iowa_bus *, void *), void *data)
{
@@ -173,7 +173,7 @@
}
/* enable IO workaround */
-void __init io_workaround_init(void)
+void __devinit io_workaround_init(void)
{
static int io_workaround_inited;
diff --git a/arch/powerpc/platforms/cell/io-workarounds.h b/arch/powerpc/platforms/cell/io-workarounds.h
index 79d8ed3..6efc778 100644
--- a/arch/powerpc/platforms/cell/io-workarounds.h
+++ b/arch/powerpc/platforms/cell/io-workarounds.h
@@ -31,9 +31,9 @@
void *private;
};
-void __init io_workaround_init(void);
-void __init iowa_register_bus(struct pci_controller *, struct ppc_pci_io *,
- int (*)(struct iowa_bus *, void *), void *);
+void __devinit io_workaround_init(void);
+void __devinit iowa_register_bus(struct pci_controller *, struct ppc_pci_io *,
+ int (*)(struct iowa_bus *, void *), void *);
struct iowa_bus *iowa_mem_find_bus(const PCI_IO_ADDR);
struct iowa_bus *iowa_pio_find_bus(unsigned long);
diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c
index 80911a3..c81341f 100644
--- a/arch/powerpc/platforms/cell/spufs/file.c
+++ b/arch/powerpc/platforms/cell/spufs/file.c
@@ -32,6 +32,7 @@
#include <linux/marker.h>
#include <asm/io.h>
+#include <asm/time.h>
#include <asm/spu.h>
#include <asm/spu_info.h>
#include <asm/uaccess.h>
diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c
index 2e411f2..745dd51 100644
--- a/arch/powerpc/platforms/cell/spufs/sched.c
+++ b/arch/powerpc/platforms/cell/spufs/sched.c
@@ -659,7 +659,7 @@
victim->stats.invol_ctx_switch++;
spu->stats.invol_ctx_switch++;
- if (test_bit(SPU_SCHED_SPU_RUN, &ctx->sched_flags))
+ if (test_bit(SPU_SCHED_SPU_RUN, &victim->sched_flags))
spu_add_to_rq(victim);
mutex_unlock(&victim->state_mutex);
diff --git a/arch/powerpc/platforms/pasemi/misc.c b/arch/powerpc/platforms/pasemi/misc.c
index ded7d15..e0ab299 100644
--- a/arch/powerpc/platforms/pasemi/misc.c
+++ b/arch/powerpc/platforms/pasemi/misc.c
@@ -24,12 +24,11 @@
*/
struct i2c_driver_device {
char *of_device;
- char *i2c_driver;
char *i2c_type;
};
static struct i2c_driver_device i2c_devices[] __initdata = {
- {"dallas,ds1338", "rtc-ds1307", "ds1338"},
+ {"dallas,ds1338", "ds1338"},
};
static int __init find_i2c_driver(struct device_node *node,
@@ -40,9 +39,7 @@
for (i = 0; i < ARRAY_SIZE(i2c_devices); i++) {
if (!of_device_is_compatible(node, i2c_devices[i].of_device))
continue;
- if (strlcpy(info->driver_name, i2c_devices[i].i2c_driver,
- KOBJ_NAME_LEN) >= KOBJ_NAME_LEN ||
- strlcpy(info->type, i2c_devices[i].i2c_type,
+ if (strlcpy(info->type, i2c_devices[i].i2c_type,
I2C_NAME_SIZE) >= I2C_NAME_SIZE)
return -ENOMEM;
return 0;
diff --git a/arch/powerpc/platforms/ps3/mm.c b/arch/powerpc/platforms/ps3/mm.c
index 5b3fb2b..3a58ffa 100644
--- a/arch/powerpc/platforms/ps3/mm.c
+++ b/arch/powerpc/platforms/ps3/mm.c
@@ -317,6 +317,9 @@
return result;
}
+ lmb_add(start_addr, map.r1.size);
+ lmb_analyze();
+
result = online_pages(start_pfn, nr_pages);
if (result)
diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c
index 3a7054e..019657c11 100644
--- a/arch/powerpc/sysdev/fsl_soc.c
+++ b/arch/powerpc/sysdev/fsl_soc.c
@@ -432,7 +432,7 @@
{"dallas,ds1339", "ds1339"},
{"dallas,ds1340", "ds1340"},
{"stm,m41t00", "m41t00"},
- {"dallas,ds1374", "rtc-ds1374"},
+ {"dallas,ds1374", "ds1374"},
};
static int __init of_find_i2c_driver(struct device_node *node,
diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index 8619f2a..7680001 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -1331,6 +1331,9 @@
unsigned long flags;
u32 reg;
+ if (!mpic)
+ return;
+
spin_lock_irqsave(&mpic_lock, flags);
if (is_ipi) {
reg = mpic_ipi_read(src - mpic->ipi_vecs[0]) &
@@ -1346,23 +1349,6 @@
spin_unlock_irqrestore(&mpic_lock, flags);
}
-unsigned int mpic_irq_get_priority(unsigned int irq)
-{
- unsigned int is_ipi;
- struct mpic *mpic = mpic_find(irq, &is_ipi);
- unsigned int src = mpic_irq_to_hw(irq);
- unsigned long flags;
- u32 reg;
-
- spin_lock_irqsave(&mpic_lock, flags);
- if (is_ipi)
- reg = mpic_ipi_read(src = mpic->ipi_vecs[0]);
- else
- reg = mpic_irq_read(src, MPIC_INFO(IRQ_VECTOR_PRI));
- spin_unlock_irqrestore(&mpic_lock, flags);
- return (reg & MPIC_VECPRI_PRIORITY_MASK) >> MPIC_VECPRI_PRIORITY_SHIFT;
-}
-
void mpic_setup_this_cpu(void)
{
#ifdef CONFIG_SMP
diff --git a/arch/ppc/Makefile b/arch/ppc/Makefile
index 8df7f0e..2352d13 100644
--- a/arch/ppc/Makefile
+++ b/arch/ppc/Makefile
@@ -43,7 +43,7 @@
KBUILD_CFLAGS += $(cpu-as-y)
# Default to the common case.
-KBUILD_DEFCONFIG := common_defconfig
+KBUILD_DEFCONFIG := ebony_defconfig
head-y := arch/ppc/kernel/head.o
head-$(CONFIG_8xx) := arch/ppc/kernel/head_8xx.o
diff --git a/arch/ppc/kernel/ppc_ksyms.c b/arch/ppc/kernel/ppc_ksyms.c
index 16ac11c..5d529bc 100644
--- a/arch/ppc/kernel/ppc_ksyms.c
+++ b/arch/ppc/kernel/ppc_ksyms.c
@@ -24,6 +24,7 @@
#include <asm/checksum.h>
#include <asm/pgtable.h>
#include <asm/tlbflush.h>
+#include <asm/cacheflush.h>
#include <linux/adb.h>
#include <linux/cuda.h>
#include <linux/pmu.h>
@@ -59,8 +60,10 @@
long long __ashldi3(long long, int);
long long __lshrdi3(long long, int);
+EXPORT_SYMBOL(empty_zero_page);
EXPORT_SYMBOL(clear_pages);
EXPORT_SYMBOL(clear_user_page);
+EXPORT_SYMBOL(copy_page);
EXPORT_SYMBOL(transfer_to_handler);
EXPORT_SYMBOL(do_IRQ);
EXPORT_SYMBOL(machine_check_exception);
diff --git a/arch/ppc/kernel/setup.c b/arch/ppc/kernel/setup.c
index bfddfde..51e8094 100644
--- a/arch/ppc/kernel/setup.c
+++ b/arch/ppc/kernel/setup.c
@@ -36,6 +36,7 @@
#include <asm/nvram.h>
#include <asm/xmon.h>
#include <asm/ocp.h>
+#include <asm/irq.h>
#define USES_PPC_SYS (defined(CONFIG_MPC10X_BRIDGE) || defined(CONFIG_8260) || \
defined(CONFIG_PPC_MPC52xx))
diff --git a/arch/ppc/platforms/residual.c b/arch/ppc/platforms/residual.c
index 18495e7..d687b0f 100644
--- a/arch/ppc/platforms/residual.c
+++ b/arch/ppc/platforms/residual.c
@@ -38,6 +38,7 @@
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/pci.h>
+#include <linux/proc_fs.h>
#include <asm/sections.h>
#include <asm/mmu.h>
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 1d03508..107e492 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -304,10 +304,14 @@
def_bool y
select SPARSEMEM_VMEMMAP_ENABLE
select SPARSEMEM_VMEMMAP
+ select SPARSEMEM_STATIC if !64BIT
config ARCH_SPARSEMEM_DEFAULT
def_bool y
+config ARCH_SELECT_MEMORY_MODEL
+ def_bool y
+
source "mm/Kconfig"
comment "I/O subsystem configuration"
diff --git a/arch/s390/appldata/appldata_base.c b/arch/s390/appldata/appldata_base.c
index 655d525..ad40729 100644
--- a/arch/s390/appldata/appldata_base.c
+++ b/arch/s390/appldata/appldata_base.c
@@ -130,6 +130,7 @@
P_DEBUG(" -= Work Queue =-\n");
i = 0;
+ get_online_cpus();
spin_lock(&appldata_ops_lock);
list_for_each(lh, &appldata_ops_list) {
ops = list_entry(lh, struct appldata_ops, list);
@@ -140,6 +141,7 @@
}
}
spin_unlock(&appldata_ops_lock);
+ put_online_cpus();
}
/*
@@ -266,12 +268,14 @@
len = *lenp;
if (copy_from_user(buf, buffer, len > sizeof(buf) ? sizeof(buf) : len))
return -EFAULT;
+ get_online_cpus();
spin_lock(&appldata_timer_lock);
if (buf[0] == '1')
__appldata_vtimer_setup(APPLDATA_ADD_TIMER);
else if (buf[0] == '0')
__appldata_vtimer_setup(APPLDATA_DEL_TIMER);
spin_unlock(&appldata_timer_lock);
+ put_online_cpus();
out:
*lenp = len;
*ppos += len;
@@ -314,10 +318,12 @@
return -EINVAL;
}
+ get_online_cpus();
spin_lock(&appldata_timer_lock);
appldata_interval = interval;
__appldata_vtimer_setup(APPLDATA_MOD_TIMER);
spin_unlock(&appldata_timer_lock);
+ put_online_cpus();
P_INFO("Monitoring CPU interval set to %u milliseconds.\n",
interval);
@@ -556,8 +562,10 @@
return -ENOMEM;
}
+ get_online_cpus();
for_each_online_cpu(i)
appldata_online_cpu(i);
+ put_online_cpus();
/* Register cpu hotplug notifier */
register_hotcpu_notifier(&appldata_nb);
diff --git a/arch/s390/defconfig b/arch/s390/defconfig
index aa341d0e..c5cdb97 100644
--- a/arch/s390/defconfig
+++ b/arch/s390/defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25
-# Wed Apr 30 11:07:45 2008
+# Linux kernel version: 2.6.26-rc4
+# Fri May 30 09:49:33 2008
#
CONFIG_SCHED_MC=y
CONFIG_MMU=y
@@ -103,6 +103,7 @@
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
@@ -173,6 +174,7 @@
# CONFIG_PREEMPT_RCU is not set
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -210,6 +212,7 @@
CONFIG_PFAULT=y
# CONFIG_SHARED_KERNEL is not set
# CONFIG_CMM is not set
+# CONFIG_PAGE_STATES is not set
CONFIG_VIRT_TIMER=y
CONFIG_VIRT_CPU_ACCOUNTING=y
# CONFIG_APPLDATA_BASE is not set
@@ -620,6 +623,7 @@
#
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+CONFIG_ACCESSIBILITY=y
#
# File systems
@@ -754,11 +758,12 @@
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
-CONFIG_HEADERS_CHECK=y
+# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_RT_MUTEXES is not set
diff --git a/arch/s390/kernel/debug.c b/arch/s390/kernel/debug.c
index dff0568..c93d129 100644
--- a/arch/s390/kernel/debug.c
+++ b/arch/s390/kernel/debug.c
@@ -71,7 +71,7 @@
size_t user_len, loff_t * offset);
static int debug_open(struct inode *inode, struct file *file);
static int debug_close(struct inode *inode, struct file *file);
-static debug_info_t* debug_info_create(char *name, int pages_per_area,
+static debug_info_t *debug_info_create(const char *name, int pages_per_area,
int nr_areas, int buf_size, mode_t mode);
static void debug_info_get(debug_info_t *);
static void debug_info_put(debug_info_t *);
@@ -234,8 +234,8 @@
*/
static debug_info_t*
-debug_info_alloc(char *name, int pages_per_area, int nr_areas, int buf_size,
- int level, int mode)
+debug_info_alloc(const char *name, int pages_per_area, int nr_areas,
+ int buf_size, int level, int mode)
{
debug_info_t* rc;
@@ -326,8 +326,8 @@
*/
static debug_info_t*
-debug_info_create(char *name, int pages_per_area, int nr_areas, int buf_size,
- mode_t mode)
+debug_info_create(const char *name, int pages_per_area, int nr_areas,
+ int buf_size, mode_t mode)
{
debug_info_t* rc;
@@ -684,9 +684,9 @@
* - Returns handle for debug area
*/
-debug_info_t *debug_register_mode(char *name, int pages_per_area, int nr_areas,
- int buf_size, mode_t mode, uid_t uid,
- gid_t gid)
+debug_info_t *debug_register_mode(const char *name, int pages_per_area,
+ int nr_areas, int buf_size, mode_t mode,
+ uid_t uid, gid_t gid)
{
debug_info_t *rc = NULL;
@@ -722,8 +722,8 @@
* - returns handle for debug area
*/
-debug_info_t *debug_register(char *name, int pages_per_area, int nr_areas,
- int buf_size)
+debug_info_t *debug_register(const char *name, int pages_per_area,
+ int nr_areas, int buf_size)
{
return debug_register_mode(name, pages_per_area, nr_areas, buf_size,
S_IRUSR | S_IWUSR, 0, 0);
diff --git a/arch/s390/kernel/dis.c b/arch/s390/kernel/dis.c
index c14a336..d2f270c 100644
--- a/arch/s390/kernel/dis.c
+++ b/arch/s390/kernel/dis.c
@@ -208,7 +208,7 @@
[INSTR_RRF_F0FF] = { 0xff, F_16,F_24,F_28,0,0,0 }, /* e.g. madbr */
[INSTR_RRF_FUFF] = { 0xff, F_24,F_16,F_28,U4_20,0,0 },/* e.g. didbr */
[INSTR_RRF_RURR] = { 0xff, R_24,R_28,R_16,U4_20,0,0 },/* e.g. .insn */
- [INSTR_RRF_R0RR] = { 0xff, R_24,R_28,R_16,0,0,0 }, /* e.g. idte */
+ [INSTR_RRF_R0RR] = { 0xff, R_24,R_16,R_28,0,0,0 }, /* e.g. idte */
[INSTR_RRF_U0FF] = { 0xff, F_24,U4_16,F_28,0,0,0 }, /* e.g. fixr */
[INSTR_RRF_U0RF] = { 0xff, R_24,U4_16,F_28,0,0,0 }, /* e.g. cfebr */
[INSTR_RRF_M0RR] = { 0xff, R_24,R_28,M_16,0,0,0 }, /* e.g. sske */
diff --git a/arch/s390/kernel/init_task.c b/arch/s390/kernel/init_task.c
index d494161..7ad0039 100644
--- a/arch/s390/kernel/init_task.c
+++ b/arch/s390/kernel/init_task.c
@@ -17,7 +17,6 @@
#include <asm/pgtable.h>
static struct fs_struct init_fs = INIT_FS;
-static struct files_struct init_files = INIT_FILES;
static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
struct mm_struct init_mm = INIT_MM(init_mm);
diff --git a/arch/s390/kernel/irq.c b/arch/s390/kernel/irq.c
index c59a86d..e7c5bfb 100644
--- a/arch/s390/kernel/irq.c
+++ b/arch/s390/kernel/irq.c
@@ -25,6 +25,7 @@
static const char *intrclass_names[] = { "EXT", "I/O", };
int i = *(loff_t *) v, j;
+ get_online_cpus();
if (i == 0) {
seq_puts(p, " ");
for_each_online_cpu(j)
@@ -43,7 +44,7 @@
seq_putc(p, '\n');
}
-
+ put_online_cpus();
return 0;
}
diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c
index 0aeb290..5d4fa4b 100644
--- a/arch/s390/kernel/smp.c
+++ b/arch/s390/kernel/smp.c
@@ -139,7 +139,6 @@
if (wait)
data.finished = CPU_MASK_NONE;
- spin_lock(&call_lock);
call_data = &data;
for_each_cpu_mask(cpu, map)
@@ -151,7 +150,6 @@
if (wait)
while (!cpus_equal(map, data.finished))
cpu_relax();
- spin_unlock(&call_lock);
out:
if (local) {
local_irq_disable();
@@ -177,11 +175,11 @@
{
cpumask_t map;
- preempt_disable();
+ spin_lock(&call_lock);
map = cpu_online_map;
cpu_clear(smp_processor_id(), map);
__smp_call_function_map(func, info, nonatomic, wait, map);
- preempt_enable();
+ spin_unlock(&call_lock);
return 0;
}
EXPORT_SYMBOL(smp_call_function);
@@ -202,10 +200,10 @@
int smp_call_function_single(int cpu, void (*func) (void *info), void *info,
int nonatomic, int wait)
{
- preempt_disable();
+ spin_lock(&call_lock);
__smp_call_function_map(func, info, nonatomic, wait,
cpumask_of_cpu(cpu));
- preempt_enable();
+ spin_unlock(&call_lock);
return 0;
}
EXPORT_SYMBOL(smp_call_function_single);
@@ -228,10 +226,10 @@
int smp_call_function_mask(cpumask_t mask, void (*func)(void *), void *info,
int wait)
{
- preempt_disable();
+ spin_lock(&call_lock);
cpu_clear(smp_processor_id(), mask);
__smp_call_function_map(func, info, 0, wait, mask);
- preempt_enable();
+ spin_unlock(&call_lock);
return 0;
}
EXPORT_SYMBOL(smp_call_function_mask);
@@ -592,7 +590,9 @@
pfault_init();
/* Mark this cpu as online */
+ spin_lock(&call_lock);
cpu_set(smp_processor_id(), cpu_online_map);
+ spin_unlock(&call_lock);
/* Switch on interrupts */
local_irq_enable();
/* Print info about this processor */
@@ -711,7 +711,7 @@
memset(sf, 0, sizeof(struct stack_frame));
sf->gprs[9] = (unsigned long) sf;
cpu_lowcore->save_area[15] = (unsigned long) sf;
- __ctl_store(cpu_lowcore->cregs_save_area[0], 0, 15);
+ __ctl_store(cpu_lowcore->cregs_save_area, 0, 15);
asm volatile(
" stam 0,15,0(%0)"
: : "a" (&cpu_lowcore->access_regs_save_area) : "memory");
@@ -1089,7 +1089,7 @@
#ifdef CONFIG_HOTPLUG_CPU
-int smp_rescan_cpus(void)
+int __ref smp_rescan_cpus(void)
{
cpumask_t newcpus;
int cpu;
diff --git a/arch/s390/kvm/diag.c b/arch/s390/kvm/diag.c
index f639a15..a0775e1 100644
--- a/arch/s390/kvm/diag.c
+++ b/arch/s390/kvm/diag.c
@@ -20,7 +20,7 @@
VCPU_EVENT(vcpu, 5, "%s", "diag time slice end");
vcpu->stat.diagnose_44++;
vcpu_put(vcpu);
- schedule();
+ yield();
vcpu_load(vcpu);
return 0;
}
diff --git a/arch/s390/kvm/interrupt.c b/arch/s390/kvm/interrupt.c
index fcd1ed8..84a7fed 100644
--- a/arch/s390/kvm/interrupt.c
+++ b/arch/s390/kvm/interrupt.c
@@ -339,6 +339,11 @@
if (kvm_cpu_has_interrupt(vcpu))
return 0;
+ __set_cpu_idle(vcpu);
+ spin_lock_bh(&vcpu->arch.local_int.lock);
+ vcpu->arch.local_int.timer_due = 0;
+ spin_unlock_bh(&vcpu->arch.local_int.lock);
+
if (psw_interrupts_disabled(vcpu)) {
VCPU_EVENT(vcpu, 3, "%s", "disabled wait");
__unset_cpu_idle(vcpu);
@@ -366,8 +371,6 @@
no_timer:
spin_lock_bh(&vcpu->arch.local_int.float_int->lock);
spin_lock_bh(&vcpu->arch.local_int.lock);
- __set_cpu_idle(vcpu);
- vcpu->arch.local_int.timer_due = 0;
add_wait_queue(&vcpu->arch.local_int.wq, &wait);
while (list_empty(&vcpu->arch.local_int.list) &&
list_empty(&vcpu->arch.local_int.float_int->list) &&
diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
index 0ac36a6..6558b09 100644
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -423,6 +423,8 @@
return -EINVAL; /* not implemented yet */
}
+extern void s390_handle_mcck(void);
+
static void __vcpu_run(struct kvm_vcpu *vcpu)
{
memcpy(&vcpu->arch.sie_block->gg14, &vcpu->arch.guest_gprs[14], 16);
@@ -430,13 +432,21 @@
if (need_resched())
schedule();
+ if (test_thread_flag(TIF_MCCK_PENDING))
+ s390_handle_mcck();
+
+ kvm_s390_deliver_pending_interrupts(vcpu);
+
vcpu->arch.sie_block->icptcode = 0;
local_irq_disable();
kvm_guest_enter();
local_irq_enable();
VCPU_EVENT(vcpu, 6, "entering sie flags %x",
atomic_read(&vcpu->arch.sie_block->cpuflags));
- sie64a(vcpu->arch.sie_block, vcpu->arch.guest_gprs);
+ if (sie64a(vcpu->arch.sie_block, vcpu->arch.guest_gprs)) {
+ VCPU_EVENT(vcpu, 3, "%s", "fault in sie instruction");
+ kvm_s390_inject_program_int(vcpu, PGM_ADDRESSING);
+ }
VCPU_EVENT(vcpu, 6, "exit sie icptcode %d",
vcpu->arch.sie_block->icptcode);
local_irq_disable();
@@ -475,7 +485,6 @@
might_sleep();
do {
- kvm_s390_deliver_pending_interrupts(vcpu);
__vcpu_run(vcpu);
rc = kvm_handle_sie_intercept(vcpu);
} while (!signal_pending(current) && !rc);
diff --git a/arch/s390/mm/init.c b/arch/s390/mm/init.c
index 29f3a63..0559864 100644
--- a/arch/s390/mm/init.c
+++ b/arch/s390/mm/init.c
@@ -44,37 +44,34 @@
void show_mem(void)
{
- int i, total = 0, reserved = 0;
- int shared = 0, cached = 0;
+ unsigned long i, total = 0, reserved = 0;
+ unsigned long shared = 0, cached = 0;
+ unsigned long flags;
struct page *page;
+ pg_data_t *pgdat;
printk("Mem-info:\n");
show_free_areas();
- i = max_mapnr;
- while (i-- > 0) {
- if (!pfn_valid(i))
- continue;
- page = pfn_to_page(i);
- total++;
- if (PageReserved(page))
- reserved++;
- else if (PageSwapCache(page))
- cached++;
- else if (page_count(page))
- shared += page_count(page) - 1;
+ for_each_online_pgdat(pgdat) {
+ pgdat_resize_lock(pgdat, &flags);
+ for (i = 0; i < pgdat->node_spanned_pages; i++) {
+ if (!pfn_valid(pgdat->node_start_pfn + i))
+ continue;
+ page = pfn_to_page(pgdat->node_start_pfn + i);
+ total++;
+ if (PageReserved(page))
+ reserved++;
+ else if (PageSwapCache(page))
+ cached++;
+ else if (page_count(page))
+ shared += page_count(page) - 1;
+ }
+ pgdat_resize_unlock(pgdat, &flags);
}
- printk("%d pages of RAM\n", total);
- printk("%d reserved pages\n", reserved);
- printk("%d pages shared\n", shared);
- printk("%d pages swap cached\n", cached);
-
- printk("%lu pages dirty\n", global_page_state(NR_FILE_DIRTY));
- printk("%lu pages writeback\n", global_page_state(NR_WRITEBACK));
- printk("%lu pages mapped\n", global_page_state(NR_FILE_MAPPED));
- printk("%lu pages slab\n",
- global_page_state(NR_SLAB_RECLAIMABLE) +
- global_page_state(NR_SLAB_UNRECLAIMABLE));
- printk("%lu pages pagetables\n", global_page_state(NR_PAGETABLE));
+ printk("%ld pages of RAM\n", total);
+ printk("%ld reserved pages\n", reserved);
+ printk("%ld pages shared\n", shared);
+ printk("%ld pages swap cached\n", cached);
}
/*
diff --git a/arch/s390/mm/pgtable.c b/arch/s390/mm/pgtable.c
index 5c1aea9..3d98ba8 100644
--- a/arch/s390/mm/pgtable.c
+++ b/arch/s390/mm/pgtable.c
@@ -254,36 +254,46 @@
int s390_enable_sie(void)
{
struct task_struct *tsk = current;
- struct mm_struct *mm;
- int rc;
+ struct mm_struct *mm, *old_mm;
- task_lock(tsk);
-
- rc = 0;
+ /* Do we have pgstes? if yes, we are done */
if (tsk->mm->context.pgstes)
- goto unlock;
+ return 0;
- rc = -EINVAL;
+ /* lets check if we are allowed to replace the mm */
+ task_lock(tsk);
if (!tsk->mm || atomic_read(&tsk->mm->mm_users) > 1 ||
- tsk->mm != tsk->active_mm || tsk->mm->ioctx_list)
- goto unlock;
+ tsk->mm != tsk->active_mm || tsk->mm->ioctx_list) {
+ task_unlock(tsk);
+ return -EINVAL;
+ }
+ task_unlock(tsk);
- tsk->mm->context.pgstes = 1; /* dirty little tricks .. */
+ /* we copy the mm with pgstes enabled */
+ tsk->mm->context.pgstes = 1;
mm = dup_mm(tsk);
tsk->mm->context.pgstes = 0;
-
- rc = -ENOMEM;
if (!mm)
- goto unlock;
- mmput(tsk->mm);
+ return -ENOMEM;
+
+ /* Now lets check again if somebody attached ptrace etc */
+ task_lock(tsk);
+ if (!tsk->mm || atomic_read(&tsk->mm->mm_users) > 1 ||
+ tsk->mm != tsk->active_mm || tsk->mm->ioctx_list) {
+ mmput(mm);
+ task_unlock(tsk);
+ return -EINVAL;
+ }
+
+ /* ok, we are alone. No ptrace, no threads, etc. */
+ old_mm = tsk->mm;
tsk->mm = tsk->active_mm = mm;
preempt_disable();
update_mm(mm, tsk);
cpu_set(smp_processor_id(), mm->cpu_vm_mask);
preempt_enable();
- rc = 0;
-unlock:
task_unlock(tsk);
- return rc;
+ mmput(old_mm);
+ return 0;
}
EXPORT_SYMBOL_GPL(s390_enable_sie);
diff --git a/arch/s390/mm/vmem.c b/arch/s390/mm/vmem.c
index beccacf..e4868bf 100644
--- a/arch/s390/mm/vmem.c
+++ b/arch/s390/mm/vmem.c
@@ -60,7 +60,7 @@
return pmd;
}
-static pte_t __init_refok *vmem_pte_alloc(void)
+static pte_t __ref *vmem_pte_alloc(void)
{
pte_t *pte;
@@ -221,6 +221,7 @@
*pt_dir = pte;
}
}
+ memset(start, 0, nr * sizeof(struct page));
ret = 0;
out:
flush_tlb_kernel_range(start_addr, end_addr);
@@ -235,7 +236,7 @@
{
struct memory_segment *tmp;
- if (seg->start + seg->size >= VMEM_MAX_PHYS ||
+ if (seg->start + seg->size > VMEM_MAX_PHYS ||
seg->start + seg->size < seg->start)
return -ERANGE;
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 8a68160..9a854c8 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -281,7 +281,6 @@
select CPU_SH4A
select CPU_SHX2
select ARCH_SPARSEMEM_ENABLE
- select SYS_SUPPORTS_NUMA
help
Select SH7723 if you have an SH-MobileR2 CPU.
diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug
index 0d2ef1e..0f45498 100644
--- a/arch/sh/Kconfig.debug
+++ b/arch/sh/Kconfig.debug
@@ -81,7 +81,7 @@
config 4KSTACKS
bool "Use 4Kb for kernel stacks instead of 8Kb"
- depends on DEBUG_KERNEL
+ depends on DEBUG_KERNEL && (MMU || BROKEN)
help
If you say Y here the kernel will use a 4Kb stacksize for the
kernel stack attached to each process/thread. This facilitates
diff --git a/arch/sh/Makefile b/arch/sh/Makefile
index 8050b03..fb7b1b1 100644
--- a/arch/sh/Makefile
+++ b/arch/sh/Makefile
@@ -41,6 +41,8 @@
cflags-$(CONFIG_CPU_BIG_ENDIAN) += -mb
cflags-$(CONFIG_CPU_LITTLE_ENDIAN) += -ml
+cflags-y += $(call cc-option,-mno-fdpic)
+
#
# -Wa,-isa= tuning implies -Wa,-dsp for the versions of binutils that
# support it, while -Wa,-dsp by itself limits the range of usable opcodes
diff --git a/arch/sh/boards/renesas/rts7751r2d/setup.c b/arch/sh/boards/renesas/rts7751r2d/setup.c
index 452d0d6..2308e87 100644
--- a/arch/sh/boards/renesas/rts7751r2d/setup.c
+++ b/arch/sh/boards/renesas/rts7751r2d/setup.c
@@ -11,7 +11,6 @@
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/ata_platform.h>
-#include <linux/serial_8250.h>
#include <linux/sm501.h>
#include <linux/sm501-regs.h>
#include <linux/pm.h>
@@ -109,27 +108,6 @@
.resource = heartbeat_resources,
};
-static struct plat_serial8250_port uart_platform_data[] = {
- {
- .membase = (void __iomem *)0xb3e30000,
- .mapbase = 0xb3e30000,
- .iotype = UPIO_MEM,
- .irq = IRQ_VOYAGER,
- .flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ,
- .regshift = 2,
- .uartclk = (9600 * 16),
- },
- { 0 },
-};
-
-static struct platform_device uart_device = {
- .name = "serial8250",
- .id = PLAT8250_DEV_PLATFORM,
- .dev = {
- .platform_data = uart_platform_data,
- },
-};
-
static struct resource sm501_resources[] = {
[0] = {
.start = 0x10000000,
@@ -185,11 +163,7 @@
};
static struct sm501_initdata sm501_initdata = {
- .gpio_high = {
- .set = 0x00001fe0,
- .mask = 0x0,
- },
- .devices = SM501_USE_USB_HOST,
+ .devices = SM501_USE_USB_HOST | SM501_USE_UART0,
};
static struct sm501_platdata sm501_platform_data = {
@@ -208,7 +182,6 @@
};
static struct platform_device *rts7751r2d_devices[] __initdata = {
- &uart_device,
&sm501_device,
&heartbeat_device,
&spi_sh_sci_device,
@@ -272,16 +245,6 @@
sm501_reg = (void __iomem *)0xb3e00000 + SM501_DRAM_CONTROL;
writel(readl(sm501_reg) | 0x00f107c0, sm501_reg);
-
- /*
- * Power Mode Gate - Enable UART0
- */
-
- sm501_reg = (void __iomem *)0xb3e00000 + SM501_POWER_MODE_0_GATE;
- writel(readl(sm501_reg) | (1 << SM501_GATE_UART0), sm501_reg);
-
- sm501_reg = (void __iomem *)0xb3e00000 + SM501_POWER_MODE_1_GATE;
- writel(readl(sm501_reg) | (1 << SM501_GATE_UART0), sm501_reg);
}
/*
diff --git a/arch/sh/configs/migor_defconfig b/arch/sh/configs/migor_defconfig
index ee59008..287408b 100644
--- a/arch/sh/configs/migor_defconfig
+++ b/arch/sh/configs/migor_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.24
-# Wed Feb 6 21:52:20 2008
+# Linux kernel version: 2.6.26-rc3
+# Thu May 22 14:30:07 2008
#
CONFIG_SUPERH=y
CONFIG_SUPERH32=y
@@ -20,6 +20,7 @@
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -36,18 +37,16 @@
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_CGROUPS is not set
-CONFIG_FAIR_GROUP_SCHED=y
-CONFIG_FAIR_USER_SCHED=y
-# CONFIG_FAIR_CGROUP_SCHED is not set
+# CONFIG_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -61,11 +60,13 @@
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
@@ -77,11 +78,15 @@
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
# CONFIG_MODULE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
@@ -105,7 +110,6 @@
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y
-# CONFIG_PREEMPT_RCU is not set
#
# System type
@@ -118,6 +122,7 @@
# CONFIG_CPU_SUBTYPE_SH7203 is not set
# CONFIG_CPU_SUBTYPE_SH7206 is not set
# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
# CONFIG_CPU_SUBTYPE_SH7705 is not set
# CONFIG_CPU_SUBTYPE_SH7706 is not set
# CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -135,6 +140,7 @@
# CONFIG_CPU_SUBTYPE_SH7751R is not set
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
@@ -142,6 +148,7 @@
# CONFIG_CPU_SUBTYPE_SHX3 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
CONFIG_CPU_SUBTYPE_SH7722=y
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
# CONFIG_CPU_SUBTYPE_SH5_101 is not set
# CONFIG_CPU_SUBTYPE_SH5_103 is not set
@@ -255,7 +262,6 @@
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
-CONFIG_RCU_TRACE=y
CONFIG_GUSA=y
#
@@ -323,8 +329,6 @@
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -376,7 +380,90 @@
CONFIG_FW_LOADER=m
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
-# CONFIG_MTD is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0xffffffff
+CONFIG_MTD_PHYSMAP_LEN=0
+CONFIG_MTD_PHYSMAP_BANKWIDTH=0
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+CONFIG_MTD_NAND_PLATFORM=y
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
@@ -385,11 +472,13 @@
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
@@ -461,6 +550,7 @@
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
@@ -482,13 +572,20 @@
#
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_EVDEV is not set
+CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
-# CONFIG_INPUT_KEYBOARD is not set
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_SH_KEYSC=y
# CONFIG_INPUT_MOUSE is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
@@ -508,6 +605,7 @@
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -531,16 +629,40 @@
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+# CONFIG_I2C_CHARDEV is not set
#
-# SPI support
+# I2C Hardware Bus support
#
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_SIMTEC is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_STUB is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+CONFIG_I2C_SH_MOBILE=y
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_EEPROM is not set
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_PCF8575 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
#
@@ -553,12 +675,22 @@
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
@@ -592,6 +724,8 @@
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_USB_ARCH_HAS_EHCI is not set
# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
@@ -608,6 +742,7 @@
CONFIG_USB_GADGET_M66592=y
CONFIG_USB_M66592=y
CONFIG_SUPERH_BUILT_IN_M66592=y
+# CONFIG_USB_GADGET_PXA27X is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_OMAP is not set
@@ -623,7 +758,9 @@
# CONFIG_USB_MIDI_GADGET is not set
# CONFIG_USB_G_PRINTER is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
@@ -640,15 +777,31 @@
# CONFIG_RTC_DRV_TEST is not set
#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+CONFIG_RTC_DRV_RS5C372=y
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+
+#
# SPI RTC drivers
#
#
# Platform RTC drivers
#
+# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
-# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_V3020 is not set
@@ -657,10 +810,6 @@
# on-CPU RTC drivers
#
CONFIG_RTC_DRV_SH=y
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -673,13 +822,10 @@
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
+# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
# CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
@@ -720,10 +866,13 @@
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
@@ -743,6 +892,7 @@
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
@@ -763,48 +913,77 @@
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Crypto core or helper
+#
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_GF128MUL is not set
-# CONFIG_CRYPTO_ECB is not set
-# CONFIG_CRYPTO_CBC is not set
-# CONFIG_CRYPTO_PCBC is not set
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-# CONFIG_CRYPTO_CTR is not set
-# CONFIG_CRYPTO_GCM is not set
-# CONFIG_CRYPTO_CCM is not set
-# CONFIG_CRYPTO_CRYPTD is not set
-# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
@@ -812,6 +991,7 @@
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
diff --git a/arch/sh/configs/rsk7203_defconfig b/arch/sh/configs/rsk7203_defconfig
new file mode 100644
index 0000000..a0ebd43
--- /dev/null
+++ b/arch/sh/configs/rsk7203_defconfig
@@ -0,0 +1,841 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.26-rc4
+# Tue Jun 3 13:02:42 2008
+#
+CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_GENERIC_TIME is not set
+# CONFIG_GENERIC_CLOCKEVENTS is not set
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_CGROUPS is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_COMPAT_BRK=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_ANON_INODES=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=y
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_TINY_SHMEM=y
+CONFIG_BASE_SMALL=0
+# CONFIG_MODULES is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_LSF is not set
+# CONFIG_BLK_DEV_BSG is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_CLASSIC_RCU=y
+
+#
+# System type
+#
+CONFIG_CPU_SH2=y
+CONFIG_CPU_SH2A=y
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+CONFIG_CPU_SUBTYPE_SH7203=y
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
+# CONFIG_CPU_SUBTYPE_SH7705 is not set
+# CONFIG_CPU_SUBTYPE_SH7706 is not set
+# CONFIG_CPU_SUBTYPE_SH7707 is not set
+# CONFIG_CPU_SUBTYPE_SH7708 is not set
+# CONFIG_CPU_SUBTYPE_SH7709 is not set
+# CONFIG_CPU_SUBTYPE_SH7710 is not set
+# CONFIG_CPU_SUBTYPE_SH7712 is not set
+# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
+# CONFIG_CPU_SUBTYPE_SH7750 is not set
+# CONFIG_CPU_SUBTYPE_SH7091 is not set
+# CONFIG_CPU_SUBTYPE_SH7750R is not set
+# CONFIG_CPU_SUBTYPE_SH7750S is not set
+# CONFIG_CPU_SUBTYPE_SH7751 is not set
+# CONFIG_CPU_SUBTYPE_SH7751R is not set
+# CONFIG_CPU_SUBTYPE_SH7760 is not set
+# CONFIG_CPU_SUBTYPE_SH4_202 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
+# CONFIG_CPU_SUBTYPE_SH7770 is not set
+# CONFIG_CPU_SUBTYPE_SH7780 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
+# CONFIG_CPU_SUBTYPE_SHX3 is not set
+# CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
+
+#
+# Memory management options
+#
+CONFIG_QUICKLIST=y
+CONFIG_PAGE_OFFSET=0x00000000
+CONFIG_MEMORY_START=0x0c000000
+CONFIG_MEMORY_SIZE=0x01000000
+CONFIG_29BIT=y
+CONFIG_ARCH_FLATMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_MAX_ACTIVE_REGIONS=1
+CONFIG_ARCH_POPULATES_NODE_MAP=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_RESOURCES_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_NR_QUICK=2
+
+#
+# Cache configuration
+#
+# CONFIG_SH_DIRECT_MAPPED is not set
+CONFIG_CACHE_WRITEBACK=y
+# CONFIG_CACHE_WRITETHROUGH is not set
+# CONFIG_CACHE_OFF is not set
+
+#
+# Processor features
+#
+# CONFIG_CPU_LITTLE_ENDIAN is not set
+CONFIG_CPU_BIG_ENDIAN=y
+CONFIG_SH_FPU=y
+CONFIG_CPU_HAS_FPU=y
+
+#
+# Board support
+#
+
+#
+# Timer and clock configuration
+#
+CONFIG_SH_CMT=y
+# CONFIG_SH_MTU2 is not set
+CONFIG_SH_TIMER_IRQ=142
+CONFIG_SH_PCLK_FREQ=16670800
+CONFIG_SH_CLK_MD=0
+# CONFIG_TICK_ONESHOT is not set
+
+#
+# CPU Frequency scaling
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+CONFIG_SH_CPU_FREQ=y
+
+#
+# DMA support
+#
+
+#
+# Companion Chips
+#
+
+#
+# Additional SuperH Device Drivers
+#
+CONFIG_HEARTBEAT=y
+# CONFIG_PUSH_SWITCH is not set
+
+#
+# Kernel features
+#
+# CONFIG_HZ_100 is not set
+# CONFIG_HZ_250 is not set
+# CONFIG_HZ_300 is not set
+CONFIG_HZ_1000=y
+CONFIG_HZ=1000
+# CONFIG_SCHED_HRTICK is not set
+# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_GUSA=y
+
+#
+# Boot options
+#
+CONFIG_ZERO_PAGE_OFFSET=0x00001000
+CONFIG_BOOT_LINK_OFFSET=0x00800000
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=serial ignore_loglevel"
+
+#
+# Bus options
+#
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Executable file formats
+#
+CONFIG_BINFMT_FLAT=y
+CONFIG_BINFMT_ZFLAT=y
+CONFIG_BINFMT_SHARED_FLAT=y
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_PACKET is not set
+# CONFIG_UNIX is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+
+#
+# Wireless
+#
+# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_MAC80211 is not set
+# CONFIG_IEEE80211 is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_START=0x20000000
+CONFIG_MTD_PHYSMAP_LEN=0x01000000
+CONFIG_MTD_PHYSMAP_BANKWIDTH=4
+# CONFIG_MTD_UCLINUX is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_NETDEVICES_MULTIQUEUE is not set
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_STNIC is not set
+CONFIG_SMC91X=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_E1000E_ENABLED is not set
+CONFIG_NETDEV_10000=y
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+# CONFIG_VT is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=4
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_UNIX98_PTYS is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+CONFIG_THERMAL=y
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+# CONFIG_VIDEO_DEV is not set
+# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+CONFIG_DAB=y
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=y
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+#
+# CONFIG_USB_GADGET is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_SH=y
+# CONFIG_UIO is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_SYSFS=y
+# CONFIG_TMPFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_SOFTLOCKUP=y
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+CONFIG_FRAME_POINTER=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
+# CONFIG_SH_STANDARD_BIOS is not set
+CONFIG_EARLY_SCIF_CONSOLE=y
+CONFIG_EARLY_SCIF_CONSOLE_PORT=0xfffe8000
+CONFIG_EARLY_PRINTK=y
+CONFIG_DEBUG_BOOTMEM=y
+CONFIG_DEBUG_STACKOVERFLOW=y
+CONFIG_DEBUG_STACK_USAGE=y
+# CONFIG_IRQSTACKS is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_PLIST=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/sh/configs/se7206_defconfig b/arch/sh/configs/se7206_defconfig
index 0d0cda90..6b34baa 100644
--- a/arch/sh/configs/se7206_defconfig
+++ b/arch/sh/configs/se7206_defconfig
@@ -1,9 +1,10 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.23-rc4
-# Thu Sep 13 16:40:16 2007
+# Linux kernel version: 2.6.26-rc4
+# Tue Jun 3 20:27:08 2008
#
CONFIG_SUPERH=y
+CONFIG_SUPERH32=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -18,6 +19,7 @@
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_NO_VIRT_TO_BUS=y
+CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -25,47 +27,82 @@
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SYSVIPC is not set
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
-# CONFIG_USER_NS is not set
-# CONFIG_AUDIT is not set
+CONFIG_AUDIT=y
+CONFIG_AUDITSYSCALL=y
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CGROUPS=y
+CONFIG_CGROUP_DEBUG=y
+CONFIG_CGROUP_NS=y
+CONFIG_CGROUP_DEVICE=y
+# CONFIG_GROUP_SCHED is not set
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+CONFIG_MM_OWNER=y
+CONFIG_CGROUP_MEM_RES_CTLR=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_USER_NS=y
+CONFIG_PID_NS=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
# CONFIG_UID16 is not set
# CONFIG_SYSCTL_SYSCALL is not set
-# CONFIG_KALLSYMS is not set
-# CONFIG_HOTPLUG is not set
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
-# CONFIG_BASE_FULL is not set
-# CONFIG_FUTEX is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
-# CONFIG_EPOLL is not set
+CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
-# CONFIG_VM_EVENT_COUNTERS is not set
-CONFIG_SLUB_DEBUG=y
+CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-# CONFIG_SLOB is not set
+# CONFIG_SLUB is not set
+CONFIG_SLOB=y
+CONFIG_PROFILING=y
+# CONFIG_MARKERS is not set
+CONFIG_OPROFILE=y
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_HAVE_KPROBES is not set
+# CONFIG_HAVE_KRETPROBES is not set
+# CONFIG_HAVE_DMA_ATTRS is not set
+CONFIG_RT_MUTEXES=y
CONFIG_TINY_SHMEM=y
-CONFIG_BASE_SMALL=1
-# CONFIG_MODULES is not set
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+# CONFIG_KMOD is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
@@ -81,6 +118,7 @@
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_NOOP=y
CONFIG_DEFAULT_IOSCHED="noop"
+# CONFIG_CLASSIC_RCU is not set
#
# System type
@@ -88,7 +126,10 @@
CONFIG_CPU_SH2=y
CONFIG_CPU_SH2A=y
# CONFIG_CPU_SUBTYPE_SH7619 is not set
+# CONFIG_CPU_SUBTYPE_SH7203 is not set
CONFIG_CPU_SUBTYPE_SH7206=y
+# CONFIG_CPU_SUBTYPE_SH7263 is not set
+# CONFIG_CPU_SUBTYPE_MXG is not set
# CONFIG_CPU_SUBTYPE_SH7705 is not set
# CONFIG_CPU_SUBTYPE_SH7706 is not set
# CONFIG_CPU_SUBTYPE_SH7707 is not set
@@ -97,6 +138,7 @@
# CONFIG_CPU_SUBTYPE_SH7710 is not set
# CONFIG_CPU_SUBTYPE_SH7712 is not set
# CONFIG_CPU_SUBTYPE_SH7720 is not set
+# CONFIG_CPU_SUBTYPE_SH7721 is not set
# CONFIG_CPU_SUBTYPE_SH7750 is not set
# CONFIG_CPU_SUBTYPE_SH7091 is not set
# CONFIG_CPU_SUBTYPE_SH7750R is not set
@@ -105,14 +147,17 @@
# CONFIG_CPU_SUBTYPE_SH7751R is not set
# CONFIG_CPU_SUBTYPE_SH7760 is not set
# CONFIG_CPU_SUBTYPE_SH4_202 is not set
-# CONFIG_CPU_SUBTYPE_ST40STB1 is not set
-# CONFIG_CPU_SUBTYPE_ST40GX1 is not set
+# CONFIG_CPU_SUBTYPE_SH7723 is not set
+# CONFIG_CPU_SUBTYPE_SH7763 is not set
# CONFIG_CPU_SUBTYPE_SH7770 is not set
# CONFIG_CPU_SUBTYPE_SH7780 is not set
# CONFIG_CPU_SUBTYPE_SH7785 is not set
# CONFIG_CPU_SUBTYPE_SHX3 is not set
# CONFIG_CPU_SUBTYPE_SH7343 is not set
# CONFIG_CPU_SUBTYPE_SH7722 is not set
+# CONFIG_CPU_SUBTYPE_SH7366 is not set
+# CONFIG_CPU_SUBTYPE_SH5_101 is not set
+# CONFIG_CPU_SUBTYPE_SH5_103 is not set
#
# Memory management options
@@ -121,23 +166,25 @@
CONFIG_PAGE_OFFSET=0x00000000
CONFIG_MEMORY_START=0x0c000000
CONFIG_MEMORY_SIZE=0x04000000
+CONFIG_29BIT=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_MAX_ACTIVE_REGIONS=1
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_PAGE_SIZE_4KB=y
# CONFIG_PAGE_SIZE_8KB is not set
# CONFIG_PAGE_SIZE_64KB is not set
CONFIG_SELECT_MEMORY_MODEL=y
-# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM=y
-CONFIG_HAVE_MEMORY_PRESENT=y
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
+# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
@@ -183,13 +230,16 @@
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-# CONFIG_SH_CPU_FREQ is not set
+CONFIG_SH_CPU_FREQ=y
#
# DMA support
@@ -213,11 +263,15 @@
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
-# CONFIG_KEXEC is not set
+# CONFIG_SCHED_HRTICK is not set
+CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
-CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
-# CONFIG_PREEMPT is not set
+CONFIG_PREEMPT=y
+CONFIG_PREEMPT_RCU=y
+CONFIG_RCU_TRACE=y
+CONFIG_GUSA=y
#
# Boot options
@@ -225,25 +279,25 @@
CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000
CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttySC3,115200 earlyprintk=serial ignore_loglevel"
+CONFIG_CMDLINE="console=ttySC3,115200 ignore_loglevel earlyprintk=serial"
#
# Bus options
#
-# CONFIG_CF_ENABLER is not set
+CONFIG_CF_ENABLER=y
+# CONFIG_CF_AREA5 is not set
+CONFIG_CF_AREA6=y
+CONFIG_CF_BASE_ADDR=0xb8000000
# CONFIG_ARCH_SUPPORTS_MSI is not set
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+# CONFIG_PCCARD is not set
#
# Executable file formats
#
CONFIG_BINFMT_FLAT=y
CONFIG_BINFMT_ZFLAT=y
-# CONFIG_BINFMT_SHARED_FLAT is not set
-# CONFIG_BINFMT_MISC is not set
+CONFIG_BINFMT_SHARED_FLAT=y
+CONFIG_BINFMT_MISC=y
#
# Networking
@@ -253,14 +307,24 @@
#
# Networking options
#
-# CONFIG_PACKET is not set
-# CONFIG_UNIX is not set
-# CONFIG_NET_KEY is not set
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
-# CONFIG_IP_PNP is not set
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
@@ -273,14 +337,13 @@
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -297,10 +360,6 @@
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
#
@@ -308,6 +367,7 @@
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
@@ -329,8 +389,10 @@
#
# Generic Driver Options
#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
@@ -339,11 +401,9 @@
# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
@@ -356,6 +416,7 @@
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
@@ -390,7 +451,6 @@
CONFIG_MTD_PHYSMAP_START=0x20000000
CONFIG_MTD_PHYSMAP_LEN=0x01000000
CONFIG_MTD_PHYSMAP_BANKWIDTH=4
-# CONFIG_MTD_SOLUTIONENGINE is not set
# CONFIG_MTD_UCLINUX is not set
# CONFIG_MTD_PLATRAM is not set
@@ -418,13 +478,19 @@
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
-# CONFIG_BLK_DEV_LOOP is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_RAM is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
+CONFIG_EEPROM_93CX6=y
+# CONFIG_ENCLOSURE_SERVICES is not set
+CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
@@ -443,23 +509,30 @@
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
+# CONFIG_VETH is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
+# CONFIG_AX88796 is not set
# CONFIG_STNIC is not set
CONFIG_SMC91X=y
-CONFIG_NETDEV_1000=y
-CONFIG_NETDEV_10000=y
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
@@ -469,28 +542,7 @@
#
# Input device support
#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-# CONFIG_INPUT_POLLDEV is not set
-
-#
-# Userland interfaces
-#
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_EVDEV is not set
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
+# CONFIG_INPUT is not set
#
# Hardware I/O ports
@@ -502,6 +554,7 @@
# Character devices
#
# CONFIG_VT is not set
+# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
@@ -520,106 +573,119 @@
# CONFIG_UNIX98_PTYS is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
-# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB_POSSIBLE=y
+# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
-CONFIG_DAB=y
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
+# CONFIG_DAB is not set
#
# Graphics support
#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_VGASTATE is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=y
-# CONFIG_FB is not set
#
# Sound
#
# CONFIG_SOUND is not set
-CONFIG_HID_SUPPORT=y
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB_ARCH_HAS_EHCI is not set
-# CONFIG_USB is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
+# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
-# CONFIG_RTC_CLASS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
#
-# DMA Engine support
+# RTC interfaces
#
-# CONFIG_DMA_ENGINE is not set
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
#
-# DMA Clients
+# SPI RTC drivers
#
#
-# DMA Devices
+# Platform RTC drivers
#
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_V3020 is not set
#
-# Userspace I/O
+# on-CPU RTC drivers
#
+CONFIG_RTC_DRV_SH=y
# CONFIG_UIO is not set
#
# File systems
#
-# CONFIG_EXT2_FS is not set
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4DEV_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-CONFIG_ROMFS_FS=y
+# CONFIG_OCFS2_FS is not set
+# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
# CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
@@ -642,10 +708,11 @@
#
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
-# CONFIG_SYSFS is not set
-# CONFIG_TMPFS is not set
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
+CONFIG_CONFIGFS_FS=y
#
# Miscellaneous filesystems
@@ -658,18 +725,28 @@
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS2_FS is not set
-# CONFIG_CRAMFS is not set
+CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-# CONFIG_NFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
# CONFIG_NFSD is not set
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_SUNRPC_BIND34 is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
@@ -681,30 +758,20 @@
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
# CONFIG_NLS is not set
-
-#
-# Distributed Lock Manager
-#
-
-#
-# Profiling support
-#
-CONFIG_PROFILING=y
-# CONFIG_OPROFILE is not set
+# CONFIG_DLM is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
@@ -712,7 +779,10 @@
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
-CONFIG_SLUB_DEBUG_ON=y
+# CONFIG_DEBUG_OBJECTS is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
@@ -722,38 +792,123 @@
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_INFO is not set
+CONFIG_DEBUG_VM=y
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_LIST=y
+# CONFIG_DEBUG_SG is not set
CONFIG_FRAME_POINTER=y
-CONFIG_FORCED_INLINING=y
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SAMPLES is not set
# CONFIG_SH_STANDARD_BIOS is not set
-CONFIG_EARLY_SCIF_CONSOLE=y
-CONFIG_EARLY_SCIF_CONSOLE_PORT=0xfffe9800
-CONFIG_EARLY_PRINTK=y
+# CONFIG_EARLY_SCIF_CONSOLE is not set
# CONFIG_DEBUG_BOOTMEM is not set
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACK_USAGE=y
-# CONFIG_4KSTACKS is not set
+# CONFIG_IRQSTACKS is not set
#
# Security options
#
# CONFIG_KEYS is not set
-# CONFIG_CRYPTO is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_LZO=y
+# CONFIG_CRYPTO_HW is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
+CONFIG_CRC7=y
+CONFIG_LIBCRC32C=y
+CONFIG_AUDIT_GENERIC=y
CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
diff --git a/arch/sh/drivers/heartbeat.c b/arch/sh/drivers/heartbeat.c
index ab77b0e..938817e3 100644
--- a/arch/sh/drivers/heartbeat.c
+++ b/arch/sh/drivers/heartbeat.c
@@ -154,4 +154,4 @@
MODULE_VERSION(DRV_VERSION);
MODULE_AUTHOR("Paul Mundt");
-MODULE_LICENSE("GPLv2");
+MODULE_LICENSE("GPL v2");
diff --git a/arch/sh/kernel/cpu/irq/intc-sh5.c b/arch/sh/kernel/cpu/irq/intc-sh5.c
index de45c6a..79baa47 100644
--- a/arch/sh/kernel/cpu/irq/intc-sh5.c
+++ b/arch/sh/kernel/cpu/irq/intc-sh5.c
@@ -242,6 +242,7 @@
reg += 8;
}
}
+ }
#endif
/*
diff --git a/arch/sh/kernel/cpu/sh4/probe.c b/arch/sh/kernel/cpu/sh4/probe.c
index ebceb0d..be49269 100644
--- a/arch/sh/kernel/cpu/sh4/probe.c
+++ b/arch/sh/kernel/cpu/sh4/probe.c
@@ -132,6 +132,7 @@
switch (prr) {
case 0x50:
+ case 0x51:
boot_cpu_data.type = CPU_SH7723;
boot_cpu_data.flags |= CPU_HAS_FPU | CPU_HAS_L2_CACHE;
break;
diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7785.c b/arch/sh/kernel/cpu/sh4a/clock-sh7785.c
index 805535a..27fa81b 100644
--- a/arch/sh/kernel/cpu/sh4a/clock-sh7785.c
+++ b/arch/sh/kernel/cpu/sh4a/clock-sh7785.c
@@ -26,7 +26,7 @@
static void master_clk_init(struct clk *clk)
{
- clk->rate *= 36;
+ clk->rate *= pfc_divisors[ctrl_inl(FRQMR1) & 0x000f];
}
static struct clk_ops sh7785_master_clk_ops = {
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
index 0693140..62ebccf 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c
@@ -16,7 +16,7 @@
static struct resource usbf_resources[] = {
[0] = {
- .name = "USBF",
+ .name = "m66592_udc",
.start = 0x04480000,
.end = 0x044800FF,
.flags = IORESOURCE_MEM,
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
index 16925cf..a0470f2 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c
@@ -16,6 +16,21 @@
static struct plat_sci_port sci_platform_data[] = {
{
+ .mapbase = 0xffe00000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIF,
+ .irqs = { 80, 80, 80, 80 },
+ },{
+ .mapbase = 0xffe10000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIF,
+ .irqs = { 81, 81, 81, 81 },
+ },{
+ .mapbase = 0xffe20000,
+ .flags = UPF_BOOT_AUTOCONF,
+ .type = PORT_SCIF,
+ .irqs = { 82, 82, 82, 82 },
+ },{
.mapbase = 0xa4e30000,
.flags = UPF_BOOT_AUTOCONF,
.type = PORT_SCI,
@@ -73,9 +88,35 @@
.resource = rtc_resources,
};
+static struct resource sh7723_usb_host_resources[] = {
+ [0] = {
+ .name = "r8a66597_hcd",
+ .start = 0xa4d80000,
+ .end = 0xa4d800ff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 65,
+ .end = 65,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device sh7723_usb_host_device = {
+ .name = "r8a66597_hcd",
+ .id = 0,
+ .dev = {
+ .dma_mask = NULL, /* not use dma */
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .num_resources = ARRAY_SIZE(sh7723_usb_host_resources),
+ .resource = sh7723_usb_host_resources,
+};
+
static struct platform_device *sh7723_devices[] __initdata = {
&sci_device,
&rtc_device,
+ &sh7723_usb_host_device,
};
static int __init sh7723_devices_setup(void)
@@ -153,7 +194,7 @@
INTC_VECT(VIO_VOUI,0x8E0),
INTC_VECT(SCIFA_SCIFA0,0x900),
- INTC_VECT(VPU_VPUI,0x920),
+ INTC_VECT(VPU_VPUI,0x980),
INTC_VECT(TPU_TPUI,0x9A0),
INTC_VECT(ADC_ADI,0x9E0),
INTC_VECT(USB_USI0,0xA20),
@@ -292,9 +333,3 @@
{
register_intc_controller(&intc_desc);
}
-
-void __init plat_mem_setup(void)
-{
- /* Register the URAM space as Node 1 */
- setup_bootmem_node(1, 0x055f0000, 0x05610000);
-}
diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c
index ae2b222..f189a55 100644
--- a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c
+++ b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c
@@ -291,8 +291,9 @@
};
static DECLARE_INTC_DESC(intc_irq_desc, "sh7763-irq", irq_vectors,
- NULL, NULL, irq_mask_registers, irq_prio_registers,
- irq_sense_registers);
+ NULL, irq_mask_registers, irq_prio_registers,
+ irq_sense_registers);
+
/* External interrupt pins in IRL mode */
static struct intc_vect irl_vectors[] __initdata = {
@@ -324,10 +325,10 @@
};
static DECLARE_INTC_DESC(intc_irl7654_desc, "sh7763-irl7654", irl_vectors,
- NULL, NULL, irl7654_mask_registers, NULL, NULL);
+ NULL, irl7654_mask_registers, NULL, NULL);
static DECLARE_INTC_DESC(intc_irl3210_desc, "sh7763-irl3210", irl_vectors,
- NULL, NULL, irl3210_mask_registers, NULL, NULL);
+ NULL, irl3210_mask_registers, NULL, NULL);
#define INTC_ICR0 0xffd00000
#define INTC_INTMSK0 0xffd00044
diff --git a/arch/sh/kernel/entry-common.S b/arch/sh/kernel/entry-common.S
index 926b2e7..718bd23 100644
--- a/arch/sh/kernel/entry-common.S
+++ b/arch/sh/kernel/entry-common.S
@@ -1,9 +1,6 @@
-/* $Id: entry.S,v 1.37 2004/06/11 13:02:46 doyu Exp $
- *
- * linux/arch/sh/entry.S
- *
+/*
* Copyright (C) 1999, 2000, 2002 Niibe Yutaka
- * Copyright (C) 2003 Paul Mundt
+ * Copyright (C) 2003 - 2008 Paul Mundt
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
@@ -262,6 +259,7 @@
.align 2
syscall_badsys: ! Bad syscall number
+ get_current_thread_info r8, r0
mov #-ENOSYS, r0
bra resume_userspace
mov.l r0, @(OFF_R0,r15) ! Return value
@@ -281,7 +279,9 @@
mov.l 1f, r8
add r0, r8
mov.l @r8, r8
- jmp @r8
+ jsr @r8
+ nop
+ bra __restore_all
nop
.align 2
diff --git a/arch/sh/kernel/head_32.S b/arch/sh/kernel/head_32.S
index d67d7ed..ae0a382 100644
--- a/arch/sh/kernel/head_32.S
+++ b/arch/sh/kernel/head_32.S
@@ -30,8 +30,8 @@
.long 0 /* RAMDISK_FLAGS */
.long 0x0200 /* ORIG_ROOT_DEV */
.long 1 /* LOADER_TYPE */
- .long 0x00360000 /* INITRD_START */
- .long 0x000a0000 /* INITRD_SIZE */
+ .long 0x00000000 /* INITRD_START */
+ .long 0x00000000 /* INITRD_SIZE */
#ifdef CONFIG_32BIT
.long 0x53453f00 + 32 /* "SE?" = 32 bit */
#else
diff --git a/arch/sh/kernel/init_task.c b/arch/sh/kernel/init_task.c
index f9bcc60..b151a25 100644
--- a/arch/sh/kernel/init_task.c
+++ b/arch/sh/kernel/init_task.c
@@ -8,7 +8,6 @@
#include <asm/pgtable.h>
static struct fs_struct init_fs = INIT_FS;
-static struct files_struct init_files = INIT_FILES;
static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
struct pt_regs fake_swapper_regs;
diff --git a/arch/sh/kernel/kgdb_stub.c b/arch/sh/kernel/kgdb_stub.c
index d453c3a..bf8ac4c 100644
--- a/arch/sh/kernel/kgdb_stub.c
+++ b/arch/sh/kernel/kgdb_stub.c
@@ -274,8 +274,7 @@
}
for (i = 0; i < count; i++) {
ch = *mem++;
- *buf++ = highhex(ch);
- *buf++ = lowhex(ch);
+ buf = pack_hex_byte(buf, ch);
}
*buf = 0;
return (buf);
@@ -330,14 +329,6 @@
return mem;
}
-/* Pack a hex byte */
-static char *pack_hex_byte(char *pkt, int byte)
-{
- *pkt++ = hexchars[(byte >> 4) & 0xf];
- *pkt++ = hexchars[(byte & 0xf)];
- return pkt;
-}
-
/* Scan for the start char '$', read the packet and check the checksum */
static void get_packet(char *buffer, int buflen)
{
@@ -435,8 +426,8 @@
/* '#' Separator, put high and low components of checksum */
put_debug_char('#');
- put_debug_char(highhex(checksum));
- put_debug_char(lowhex(checksum));
+ put_debug_char(hex_asc_hi(checksum));
+ put_debug_char(hex_asc_lo(checksum));
}
while ((get_debug_char()) != '+'); /* While no ack */
}
@@ -658,8 +649,8 @@
static void send_signal_msg(const int signum)
{
out_buffer[0] = 'S';
- out_buffer[1] = highhex(signum);
- out_buffer[2] = lowhex(signum);
+ out_buffer[1] = hex_asc_hi(signum);
+ out_buffer[2] = hex_asc_lo(signum);
out_buffer[3] = 0;
put_packet(out_buffer);
}
diff --git a/arch/sh/kernel/module.c b/arch/sh/kernel/module.c
index b3d0a03..5482e65 100644
--- a/arch/sh/kernel/module.c
+++ b/arch/sh/kernel/module.c
@@ -30,6 +30,7 @@
#include <linux/fs.h>
#include <linux/string.h>
#include <linux/kernel.h>
+#include <asm/unaligned.h>
void *module_alloc(unsigned long size)
{
@@ -56,34 +57,6 @@
return 0;
}
-#ifdef CONFIG_SUPERH32
-#define COPY_UNALIGNED_WORD(sw, tw, align) \
-{ \
- void *__s = &(sw), *__t = &(tw); \
- unsigned short *__s2 = __s, *__t2 = __t; \
- unsigned char *__s1 = __s, *__t1 = __t; \
- switch ((align)) \
- { \
- case 0: \
- *(unsigned long *) __t = *(unsigned long *) __s; \
- break; \
- case 2: \
- *__t2++ = *__s2++; \
- *__t2 = *__s2; \
- break; \
- default: \
- *__t1++ = *__s1++; \
- *__t1++ = *__s1++; \
- *__t1++ = *__s1++; \
- *__t1 = *__s1; \
- break; \
- } \
-}
-#else
-/* One thing SHmedia doesn't screw up! */
-#define COPY_UNALIGNED_WORD(sw, tw, align) { (tw) = (sw); }
-#endif
-
int apply_relocate_add(Elf32_Shdr *sechdrs,
const char *strtab,
unsigned int symindex,
@@ -96,7 +69,6 @@
Elf32_Addr relocation;
uint32_t *location;
uint32_t value;
- int align;
pr_debug("Applying relocate section %u to %u\n", relsec,
sechdrs[relsec].sh_info);
@@ -109,7 +81,6 @@
sym = (Elf32_Sym *)sechdrs[symindex].sh_addr
+ ELF32_R_SYM(rel[i].r_info);
relocation = sym->st_value + rel[i].r_addend;
- align = (int)location & 3;
#ifdef CONFIG_SUPERH64
/* For text addresses, bit2 of the st_other field indicates
@@ -122,15 +93,15 @@
switch (ELF32_R_TYPE(rel[i].r_info)) {
case R_SH_DIR32:
- COPY_UNALIGNED_WORD (*location, value, align);
+ value = get_unaligned(location);
value += relocation;
- COPY_UNALIGNED_WORD (value, *location, align);
+ put_unaligned(value, location);
break;
case R_SH_REL32:
relocation = (relocation - (Elf32_Addr) location);
- COPY_UNALIGNED_WORD (*location, value, align);
+ value = get_unaligned(location);
value += relocation;
- COPY_UNALIGNED_WORD (value, *location, align);
+ put_unaligned(value, location);
break;
case R_SH_IMM_LOW16:
*location = (*location & ~0x3fffc00) |
diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c
index 516bde9..bca2bbc 100644
--- a/arch/sh/kernel/setup.c
+++ b/arch/sh/kernel/setup.c
@@ -292,6 +292,17 @@
ROOT_DEV = old_decode_dev(ORIG_ROOT_DEV);
+ printk(KERN_NOTICE "Boot params:\n"
+ "... MOUNT_ROOT_RDONLY - %08lx\n"
+ "... RAMDISK_FLAGS - %08lx\n"
+ "... ORIG_ROOT_DEV - %08lx\n"
+ "... LOADER_TYPE - %08lx\n"
+ "... INITRD_START - %08lx\n"
+ "... INITRD_SIZE - %08lx\n",
+ MOUNT_ROOT_RDONLY, RAMDISK_FLAGS,
+ ORIG_ROOT_DEV, LOADER_TYPE,
+ INITRD_START, INITRD_SIZE);
+
#ifdef CONFIG_BLK_DEV_RAM
rd_image_start = RAMDISK_FLAGS & RAMDISK_IMAGE_START_MASK;
rd_prompt = ((RAMDISK_FLAGS & RAMDISK_PROMPT_FLAG) != 0);
diff --git a/arch/sh/kernel/traps.c b/arch/sh/kernel/traps.c
index a3bdc68..438f1eb 100644
--- a/arch/sh/kernel/traps.c
+++ b/arch/sh/kernel/traps.c
@@ -4,6 +4,7 @@
#include <linux/kdebug.h>
#include <linux/signal.h>
#include <linux/sched.h>
+#include <linux/uaccess.h>
#include <asm/system.h>
#ifdef CONFIG_BUG
@@ -21,7 +22,14 @@
int is_valid_bugaddr(unsigned long addr)
{
- return addr >= PAGE_OFFSET;
+ unsigned short opcode;
+
+ if (addr < PAGE_OFFSET)
+ return 0;
+ if (probe_kernel_address((u16 *)addr, opcode))
+ return 0;
+
+ return opcode == TRAPA_BUG_OPCODE;
}
#endif
diff --git a/arch/sh/lib/memcpy-sh4.S b/arch/sh/lib/memcpy-sh4.S
index 560bc17..459fa92 100644
--- a/arch/sh/lib/memcpy-sh4.S
+++ b/arch/sh/lib/memcpy-sh4.S
@@ -126,10 +126,10 @@
mov.l r3,@-r0 ! 30 LS
#else
-3: mov r1,r3 ! OPQR
+3: mov r7,r3 ! OPQR
shlr8 r3 ! xOPQ
- mov.l @(r0,r5),r1 ! KLMN
- mov r1,r6
+ mov.l @(r0,r5),r7 ! KLMN
+ mov r7,r6
shll16 r6
shll8 r6 ! Nxxx
or r6,r3 ! NOPQ
@@ -733,24 +733,24 @@
movca.l r0,@r1 ! 40 LS (latency=3-7)
add #-0x1c, r1 ! 50 EX
- mov.l r3, @(0x1c,r1) ! 33 LS
+ mov.l r3, @(0x18,r1) ! 33 LS
xtrct r11, r10 ! 48 EX
- mov.l r6, @(0x18,r1) ! 33 LS
+ mov.l r6, @(0x14,r1) ! 33 LS
xtrct r12, r11 ! 48 EX
- mov.l r7, @(0x14,r1) ! 33 LS
+ mov.l r7, @(0x10,r1) ! 33 LS
- mov.l r8, @(0x10,r1) ! 33 LS
- add #-0x3e, r5 ! 50 EX
+ mov.l r8, @(0x0c,r1) ! 33 LS
+ add #-0x1e, r5 ! 50 EX
- mov.l r9, @(0x0c,r1) ! 33 LS
+ mov.l r9, @(0x08,r1) ! 33 LS
cmp/eq r2,r1 ! 54 MT
- mov.l r10, @(0x08,r1) ! 33 LS
+ mov.l r10, @(0x04,r1) ! 33 LS
bf/s 2b ! 109 BR
- mov.l r11, @(0x04,r1) ! 33 LS
+ mov.l r11, @(0x00,r1) ! 33 LS
#endif
mov.l @r15+, r12
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index d211fdb..789724e 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -1,4 +1,3 @@
-# $Id: config.in,v 1.113 2002/01/24 22:14:44 davem Exp $
# For a description of the syntax of this configuration file,
# see Documentation/kbuild/kconfig-language.txt.
#
diff --git a/arch/sparc/boot/Makefile b/arch/sparc/boot/Makefile
index b365084..22d331e 100644
--- a/arch/sparc/boot/Makefile
+++ b/arch/sparc/boot/Makefile
@@ -1,4 +1,3 @@
-# $Id: Makefile,v 1.10 2000/02/23 08:17:46 jj Exp $
# Makefile for the Sparc boot stuff.
#
# Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
diff --git a/arch/sparc/boot/btfixupprep.c b/arch/sparc/boot/btfixupprep.c
index dc7b054..52a4208 100644
--- a/arch/sparc/boot/btfixupprep.c
+++ b/arch/sparc/boot/btfixupprep.c
@@ -1,4 +1,4 @@
-/* $Id: btfixupprep.c,v 1.6 2001/08/22 15:27:47 davem Exp $
+/*
Simple utility to prepare vmlinux image for sparc.
Resolves all BTFIXUP uses and settings and creates
a special .s object to link to the image.
diff --git a/arch/sparc/boot/piggyback.c b/arch/sparc/boot/piggyback.c
index 6962cc6..c9f500c 100644
--- a/arch/sparc/boot/piggyback.c
+++ b/arch/sparc/boot/piggyback.c
@@ -1,4 +1,4 @@
-/* $Id: piggyback.c,v 1.4 2000/12/05 00:48:57 anton Exp $
+/*
Simple utility to make a single-image install kernel with initial ramdisk
for Sparc tftpbooting without need to set up nfs.
diff --git a/arch/sparc/kernel/ebus.c b/arch/sparc/kernel/ebus.c
index 96344ff..92c6fc0 100644
--- a/arch/sparc/kernel/ebus.c
+++ b/arch/sparc/kernel/ebus.c
@@ -1,4 +1,4 @@
-/* $Id: ebus.c,v 1.20 2002/01/05 01:13:43 davem Exp $
+/*
* ebus.c: PCI to EBus bridge device.
*
* Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be)
diff --git a/arch/sparc/kernel/etrap.S b/arch/sparc/kernel/etrap.S
index a8b35be..f37d961 100644
--- a/arch/sparc/kernel/etrap.S
+++ b/arch/sparc/kernel/etrap.S
@@ -1,4 +1,4 @@
-/* $Id: etrap.S,v 1.31 2000/01/08 16:38:18 anton Exp $
+/*
* etrap.S: Sparc trap window preparation for entry into the
* Linux kernel.
*
diff --git a/arch/sparc/kernel/head.S b/arch/sparc/kernel/head.S
index 8bec05f..3bfd608 100644
--- a/arch/sparc/kernel/head.S
+++ b/arch/sparc/kernel/head.S
@@ -1,4 +1,4 @@
-/* $Id: head.S,v 1.105 2001/08/12 09:08:56 davem Exp $
+/*
* head.S: The initial boot code for the Sparc port of Linux.
*
* Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
diff --git a/arch/sparc/kernel/idprom.c b/arch/sparc/kernel/idprom.c
index 3a5bad5..7220562 100644
--- a/arch/sparc/kernel/idprom.c
+++ b/arch/sparc/kernel/idprom.c
@@ -1,4 +1,4 @@
-/* $Id: idprom.c,v 1.24 1999/08/31 06:54:20 davem Exp $
+/*
* idprom.c: Routines to load the idprom into kernel addresses and
* interpret the data contained within.
*
diff --git a/arch/sparc/kernel/init_task.c b/arch/sparc/kernel/init_task.c
index d9d4f96..8e64ebc 100644
--- a/arch/sparc/kernel/init_task.c
+++ b/arch/sparc/kernel/init_task.c
@@ -9,7 +9,6 @@
#include <asm/uaccess.h>
static struct fs_struct init_fs = INIT_FS;
-static struct files_struct init_files = INIT_FILES;
static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
struct mm_struct init_mm = INIT_MM(init_mm);
diff --git a/arch/sparc/kernel/ioport.c b/arch/sparc/kernel/ioport.c
index ad0ede2..7b17522 100644
--- a/arch/sparc/kernel/ioport.c
+++ b/arch/sparc/kernel/ioport.c
@@ -1,4 +1,4 @@
-/* $Id: ioport.c,v 1.45 2001/10/30 04:54:21 davem Exp $
+/*
* ioport.c: Simple io mapping allocator.
*
* Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
diff --git a/arch/sparc/kernel/irq.c b/arch/sparc/kernel/irq.c
index 01a6756..087390b 100644
--- a/arch/sparc/kernel/irq.c
+++ b/arch/sparc/kernel/irq.c
@@ -1,4 +1,4 @@
-/* $Id: irq.c,v 1.114 2001/12/11 04:55:51 davem Exp $
+/*
* arch/sparc/kernel/irq.c: Interrupt request handling routines. On the
* Sparc the IRQs are basically 'cast in stone'
* and you are supposed to probe the prom's device
diff --git a/arch/sparc/kernel/led.c b/arch/sparc/kernel/led.c
index 59e9344..adaaed4 100644
--- a/arch/sparc/kernel/led.c
+++ b/arch/sparc/kernel/led.c
@@ -2,6 +2,7 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
#include <linux/string.h>
#include <linux/jiffies.h>
#include <linux/timer.h>
@@ -45,21 +46,22 @@
add_timer(&led_blink_timer);
}
-static int led_read_proc(char *buf, char **start, off_t offset, int count,
- int *eof, void *data)
+static int led_proc_show(struct seq_file *m, void *v)
{
- int len = 0;
-
if (get_auxio() & AUXIO_LED)
- len = sprintf(buf, "on\n");
+ seq_puts(m, "on\n");
else
- len = sprintf(buf, "off\n");
-
- return len;
+ seq_puts(m, "off\n");
+ return 0;
}
-static int led_write_proc(struct file *file, const char __user *buffer,
- unsigned long count, void *data)
+static int led_proc_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, led_proc_show, NULL);
+}
+
+static ssize_t led_proc_write(struct file *file, const char __user *buffer,
+ size_t count, loff_t *ppos)
{
char *buf = NULL;
@@ -103,6 +105,15 @@
return count;
}
+static const struct file_operations led_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = led_proc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+ .write = led_proc_write,
+};
+
static struct proc_dir_entry *led;
#define LED_VERSION "0.1"
@@ -112,12 +123,9 @@
init_timer(&led_blink_timer);
led_blink_timer.function = led_blink;
- led = create_proc_entry("led", 0, NULL);
+ led = proc_create("led", 0, NULL, &led_proc_fops);
if (!led)
return -ENOMEM;
-
- led->read_proc = led_read_proc; /* reader function */
- led->write_proc = led_write_proc; /* writer function */
led->owner = THIS_MODULE;
printk(KERN_INFO
diff --git a/arch/sparc/kernel/muldiv.c b/arch/sparc/kernel/muldiv.c
index 37b9a49..e352239 100644
--- a/arch/sparc/kernel/muldiv.c
+++ b/arch/sparc/kernel/muldiv.c
@@ -1,4 +1,4 @@
-/* $Id: muldiv.c,v 1.5 1997/12/15 20:07:20 ecd Exp $
+/*
* muldiv.c: Hardware multiply/division illegal instruction trap
* for sun4c/sun4 (which do not have those instructions)
*
diff --git a/arch/sparc/kernel/rtrap.S b/arch/sparc/kernel/rtrap.S
index b27b5b5..ce30082 100644
--- a/arch/sparc/kernel/rtrap.S
+++ b/arch/sparc/kernel/rtrap.S
@@ -1,4 +1,4 @@
-/* $Id: rtrap.S,v 1.58 2002/01/31 03:30:05 davem Exp $
+/*
* rtrap.S: Return from Sparc trap low-level code.
*
* Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
@@ -139,7 +139,7 @@
LOAD_PT_PRIV(sp, t_psr, t_pc, t_npc)
or %t_pc, %t_npc, %g2
andcc %g2, 0x3, %g0
- sethi %hi(PSR_SYCALL), %g2
+ sethi %hi(PSR_SYSCALL), %g2
be 1f
andn %t_psr, %g2, %t_psr
diff --git a/arch/sparc/kernel/setup.c b/arch/sparc/kernel/setup.c
index 8a55c4f..a0ea0bc 100644
--- a/arch/sparc/kernel/setup.c
+++ b/arch/sparc/kernel/setup.c
@@ -1,4 +1,4 @@
-/* $Id: setup.c,v 1.126 2001/11/13 00:49:27 davem Exp $
+/*
* linux/arch/sparc/kernel/setup.c
*
* Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
diff --git a/arch/sparc/kernel/sparc_ksyms.c b/arch/sparc/kernel/sparc_ksyms.c
index aa8ee06..b23cea5 100644
--- a/arch/sparc/kernel/sparc_ksyms.c
+++ b/arch/sparc/kernel/sparc_ksyms.c
@@ -1,4 +1,4 @@
-/* $Id: sparc_ksyms.c,v 1.107 2001/07/17 16:17:33 anton Exp $
+/*
* arch/sparc/kernel/ksyms.c: Sparc specific ksyms support.
*
* Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
diff --git a/arch/sparc/kernel/sun4d_irq.c b/arch/sparc/kernel/sun4d_irq.c
index e0efab2..8ac5661 100644
--- a/arch/sparc/kernel/sun4d_irq.c
+++ b/arch/sparc/kernel/sun4d_irq.c
@@ -1,4 +1,4 @@
-/* $Id: sun4d_irq.c,v 1.29 2001/12/11 04:55:51 davem Exp $
+/*
* arch/sparc/kernel/sun4d_irq.c:
* SS1000/SC2000 interrupt handling.
*
diff --git a/arch/sparc/kernel/sys_sparc.c b/arch/sparc/kernel/sys_sparc.c
index e995491..3c6b49a 100644
--- a/arch/sparc/kernel/sys_sparc.c
+++ b/arch/sparc/kernel/sys_sparc.c
@@ -219,7 +219,7 @@
return err;
}
-int sparc_mmap_check(unsigned long addr, unsigned long len, unsigned long flags)
+int sparc_mmap_check(unsigned long addr, unsigned long len)
{
if (ARCH_SUN4C_SUN4 &&
(len > 0x20000000 ||
@@ -295,52 +295,14 @@
unsigned long old_len, unsigned long new_len,
unsigned long flags, unsigned long new_addr)
{
- struct vm_area_struct *vma;
unsigned long ret = -EINVAL;
- if (ARCH_SUN4C_SUN4) {
- if (old_len > 0x20000000 || new_len > 0x20000000)
- goto out;
- if (addr < 0xe0000000 && addr + old_len > 0x20000000)
- goto out;
- }
- if (old_len > TASK_SIZE - PAGE_SIZE ||
- new_len > TASK_SIZE - PAGE_SIZE)
+
+ if (unlikely(sparc_mmap_check(addr, old_len)))
+ goto out;
+ if (unlikely(sparc_mmap_check(new_addr, new_len)))
goto out;
down_write(¤t->mm->mmap_sem);
- if (flags & MREMAP_FIXED) {
- if (ARCH_SUN4C_SUN4 &&
- new_addr < 0xe0000000 &&
- new_addr + new_len > 0x20000000)
- goto out_sem;
- if (new_addr + new_len > TASK_SIZE - PAGE_SIZE)
- goto out_sem;
- } else if ((ARCH_SUN4C_SUN4 && addr < 0xe0000000 &&
- addr + new_len > 0x20000000) ||
- addr + new_len > TASK_SIZE - PAGE_SIZE) {
- unsigned long map_flags = 0;
- struct file *file = NULL;
-
- ret = -ENOMEM;
- if (!(flags & MREMAP_MAYMOVE))
- goto out_sem;
-
- vma = find_vma(current->mm, addr);
- if (vma) {
- if (vma->vm_flags & VM_SHARED)
- map_flags |= MAP_SHARED;
- file = vma->vm_file;
- }
-
- new_addr = get_unmapped_area(file, addr, new_len,
- vma ? vma->vm_pgoff : 0,
- map_flags);
- ret = new_addr;
- if (new_addr & ~PAGE_MASK)
- goto out_sem;
- flags |= MREMAP_FIXED;
- }
ret = do_mremap(addr, old_len, new_len, flags, new_addr);
-out_sem:
up_write(¤t->mm->mmap_sem);
out:
return ret;
diff --git a/arch/sparc/kernel/trampoline.S b/arch/sparc/kernel/trampoline.S
index 2dcdaa1..356c56a 100644
--- a/arch/sparc/kernel/trampoline.S
+++ b/arch/sparc/kernel/trampoline.S
@@ -1,4 +1,4 @@
-/* $Id: trampoline.S,v 1.14 2002/01/11 08:45:38 davem Exp $
+/*
* trampoline.S: SMP cpu boot-up trampoline code.
*
* Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
diff --git a/arch/sparc/kernel/traps.c b/arch/sparc/kernel/traps.c
index d404e79..978e9d8 100644
--- a/arch/sparc/kernel/traps.c
+++ b/arch/sparc/kernel/traps.c
@@ -1,4 +1,4 @@
-/* $Id: traps.c,v 1.64 2000/09/03 15:00:49 anton Exp $
+/*
* arch/sparc/kernel/traps.c
*
* Copyright 1995 David S. Miller (davem@caip.rutgers.edu)
diff --git a/arch/sparc/kernel/unaligned.c b/arch/sparc/kernel/unaligned.c
index 33857be..c2a28c5 100644
--- a/arch/sparc/kernel/unaligned.c
+++ b/arch/sparc/kernel/unaligned.c
@@ -1,4 +1,4 @@
-/* $Id: unaligned.c,v 1.23 2001/12/21 00:54:31 davem Exp $
+/*
* unaligned.c: Unaligned load/store trap handling with special
* cases for the kernel to do them more quickly.
*
diff --git a/arch/sparc/kernel/wof.S b/arch/sparc/kernel/wof.S
index 083b121..4bce38d 100644
--- a/arch/sparc/kernel/wof.S
+++ b/arch/sparc/kernel/wof.S
@@ -1,4 +1,4 @@
-/* $Id: wof.S,v 1.40 2000/01/08 16:38:18 anton Exp $
+/*
* wof.S: Sparc window overflow handler.
*
* Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
diff --git a/arch/sparc/kernel/wuf.S b/arch/sparc/kernel/wuf.S
index d1a266b..82e5145 100644
--- a/arch/sparc/kernel/wuf.S
+++ b/arch/sparc/kernel/wuf.S
@@ -1,4 +1,4 @@
-/* $Id: wuf.S,v 1.39 2000/01/08 16:38:18 anton Exp $
+/*
* wuf.S: Window underflow trap handler for the Sparc.
*
* Copyright (C) 1995 David S. Miller
diff --git a/arch/sparc/lib/Makefile b/arch/sparc/lib/Makefile
index 76effdb..6e303e1 100644
--- a/arch/sparc/lib/Makefile
+++ b/arch/sparc/lib/Makefile
@@ -1,4 +1,3 @@
-# $Id: Makefile,v 1.35 2000/12/15 00:41:18 davem Exp $
# Makefile for Sparc library files..
#
diff --git a/arch/sparc/lib/ashldi3.S b/arch/sparc/lib/ashldi3.S
index 52418a0..17912e6 100644
--- a/arch/sparc/lib/ashldi3.S
+++ b/arch/sparc/lib/ashldi3.S
@@ -1,4 +1,4 @@
-/* $Id: ashldi3.S,v 1.2 1999/11/19 04:11:46 davem Exp $
+/*
* ashldi3.S: GCC emits these for certain drivers playing
* with long longs.
*
diff --git a/arch/sparc/lib/ashrdi3.S b/arch/sparc/lib/ashrdi3.S
index 2848237..85398fd6 100644
--- a/arch/sparc/lib/ashrdi3.S
+++ b/arch/sparc/lib/ashrdi3.S
@@ -1,4 +1,4 @@
-/* $Id: ashrdi3.S,v 1.4 1999/11/19 04:11:49 davem Exp $
+/*
* ashrdi3.S: The filesystem code creates all kinds of references to
* this little routine on the sparc with gcc.
*
diff --git a/arch/sparc/lib/blockops.S b/arch/sparc/lib/blockops.S
index a7c7ffa..804be87 100644
--- a/arch/sparc/lib/blockops.S
+++ b/arch/sparc/lib/blockops.S
@@ -1,4 +1,4 @@
-/* $Id: blockops.S,v 1.8 1998/01/30 10:58:44 jj Exp $
+/*
* blockops.S: Common block zero optimized routines.
*
* Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
diff --git a/arch/sparc/lib/locks.S b/arch/sparc/lib/locks.S
index b1df55c..64f53f2 100644
--- a/arch/sparc/lib/locks.S
+++ b/arch/sparc/lib/locks.S
@@ -1,4 +1,4 @@
-/* $Id: locks.S,v 1.16 2000/02/26 11:02:47 anton Exp $
+/*
* locks.S: SMP low-level lock primitives on Sparc.
*
* Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
diff --git a/arch/sparc/lib/lshrdi3.S b/arch/sparc/lib/lshrdi3.S
index 35abf5b..47a1354 100644
--- a/arch/sparc/lib/lshrdi3.S
+++ b/arch/sparc/lib/lshrdi3.S
@@ -1,4 +1,3 @@
-/* $Id: lshrdi3.S,v 1.1 1999/03/21 06:37:45 davem Exp $ */
.globl __lshrdi3
__lshrdi3:
diff --git a/arch/sparc/lib/memscan.S b/arch/sparc/lib/memscan.S
index 28e78ff..4ff1657 100644
--- a/arch/sparc/lib/memscan.S
+++ b/arch/sparc/lib/memscan.S
@@ -1,4 +1,4 @@
-/* $Id: memscan.S,v 1.4 1996/09/08 02:01:20 davem Exp $
+/*
* memscan.S: Optimized memscan for the Sparc.
*
* Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
diff --git a/arch/sparc/lib/mul.S b/arch/sparc/lib/mul.S
index da69356..c45470d 100644
--- a/arch/sparc/lib/mul.S
+++ b/arch/sparc/lib/mul.S
@@ -1,4 +1,4 @@
-/* $Id: mul.S,v 1.4 1996/09/30 02:22:32 davem Exp $
+/*
* mul.S: This routine was taken from glibc-1.09 and is covered
* by the GNU Library General Public License Version 2.
*/
diff --git a/arch/sparc/lib/rem.S b/arch/sparc/lib/rem.S
index bf015a9..42fb862 100644
--- a/arch/sparc/lib/rem.S
+++ b/arch/sparc/lib/rem.S
@@ -1,4 +1,4 @@
-/* $Id: rem.S,v 1.7 1996/09/30 02:22:34 davem Exp $
+/*
* rem.S: This routine was taken from glibc-1.09 and is covered
* by the GNU Library General Public License Version 2.
*/
diff --git a/arch/sparc/lib/rwsem.S b/arch/sparc/lib/rwsem.S
index f406b1f..9675268 100644
--- a/arch/sparc/lib/rwsem.S
+++ b/arch/sparc/lib/rwsem.S
@@ -1,4 +1,4 @@
-/* $Id: rwsem.S,v 1.5 2000/05/09 17:40:13 davem Exp $
+/*
* Assembly part of rw semaphores.
*
* Copyright (C) 1999 Jakub Jelinek (jakub@redhat.com)
diff --git a/arch/sparc/lib/sdiv.S b/arch/sparc/lib/sdiv.S
index af94516..f0a0d4e 100644
--- a/arch/sparc/lib/sdiv.S
+++ b/arch/sparc/lib/sdiv.S
@@ -1,4 +1,4 @@
-/* $Id: sdiv.S,v 1.6 1996/10/02 17:37:00 davem Exp $
+/*
* sdiv.S: This routine was taken from glibc-1.09 and is covered
* by the GNU Library General Public License Version 2.
*/
diff --git a/arch/sparc/lib/strncmp.S b/arch/sparc/lib/strncmp.S
index 6156268..494ec66 100644
--- a/arch/sparc/lib/strncmp.S
+++ b/arch/sparc/lib/strncmp.S
@@ -1,4 +1,4 @@
-/* $Id: strncmp.S,v 1.2 1996/09/09 02:47:20 davem Exp $
+/*
* strncmp.S: Hand optimized Sparc assembly of GCC output from GNU libc
* generic strncmp routine.
*/
diff --git a/arch/sparc/lib/udiv.S b/arch/sparc/lib/udiv.S
index 169e01d..2101405 100644
--- a/arch/sparc/lib/udiv.S
+++ b/arch/sparc/lib/udiv.S
@@ -1,4 +1,4 @@
-/* $Id: udiv.S,v 1.4 1996/09/30 02:22:38 davem Exp $
+/*
* udiv.S: This routine was taken from glibc-1.09 and is covered
* by the GNU Library General Public License Version 2.
*/
diff --git a/arch/sparc/lib/umul.S b/arch/sparc/lib/umul.S
index f0e5b20..1f36ae6 100644
--- a/arch/sparc/lib/umul.S
+++ b/arch/sparc/lib/umul.S
@@ -1,4 +1,4 @@
-/* $Id: umul.S,v 1.4 1996/09/30 02:22:39 davem Exp $
+/*
* umul.S: This routine was taken from glibc-1.09 and is covered
* by the GNU Library General Public License Version 2.
*/
diff --git a/arch/sparc/lib/urem.S b/arch/sparc/lib/urem.S
index 6b92bdc..77123eb 100644
--- a/arch/sparc/lib/urem.S
+++ b/arch/sparc/lib/urem.S
@@ -1,4 +1,4 @@
-/* $Id: urem.S,v 1.4 1996/09/30 02:22:42 davem Exp $
+/*
* urem.S: This routine was taken from glibc-1.09 and is covered
* by the GNU Library General Public License Version 2.
*/
diff --git a/arch/sparc/math-emu/ashldi3.S b/arch/sparc/math-emu/ashldi3.S
index eab1d09..7230ff5 100644
--- a/arch/sparc/math-emu/ashldi3.S
+++ b/arch/sparc/math-emu/ashldi3.S
@@ -1,4 +1,4 @@
-/* $Id: ashldi3.S,v 1.1 1998/04/06 16:09:28 jj Exp $
+/*
* ashldi3.S: Math-emu code creates all kinds of references to
* this little routine on the sparc with gcc.
*
diff --git a/arch/sparc/mm/Makefile b/arch/sparc/mm/Makefile
index 16eeba4b..109c8b2 100644
--- a/arch/sparc/mm/Makefile
+++ b/arch/sparc/mm/Makefile
@@ -1,4 +1,3 @@
-# $Id: Makefile,v 1.38 2000/12/15 00:41:22 davem Exp $
# Makefile for the linux Sparc-specific parts of the memory manager.
#
diff --git a/arch/sparc/mm/fault.c b/arch/sparc/mm/fault.c
index abd5079..0a3cd8f 100644
--- a/arch/sparc/mm/fault.c
+++ b/arch/sparc/mm/fault.c
@@ -1,4 +1,4 @@
-/* $Id: fault.c,v 1.122 2001/11/17 07:19:26 davem Exp $
+/*
* fault.c: Page fault handlers for the Sparc.
*
* Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
diff --git a/arch/sparc/mm/generic.c b/arch/sparc/mm/generic.c
index 1ef7fa0..a289261 100644
--- a/arch/sparc/mm/generic.c
+++ b/arch/sparc/mm/generic.c
@@ -1,4 +1,4 @@
-/* $Id: generic.c,v 1.14 2001/12/21 04:56:15 davem Exp $
+/*
* generic.c: Generic Sparc mm routines that are not dependent upon
* MMU type but are Sparc specific.
*
diff --git a/arch/sparc/mm/hypersparc.S b/arch/sparc/mm/hypersparc.S
index d29cc24..44aad32 100644
--- a/arch/sparc/mm/hypersparc.S
+++ b/arch/sparc/mm/hypersparc.S
@@ -1,4 +1,4 @@
-/* $Id: hypersparc.S,v 1.18 2001/12/21 04:56:15 davem Exp $
+/*
* hypersparc.S: High speed Hypersparc mmu/cache operations.
*
* Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu)
diff --git a/arch/sparc/mm/init.c b/arch/sparc/mm/init.c
index b89837a..7794ecb 100644
--- a/arch/sparc/mm/init.c
+++ b/arch/sparc/mm/init.c
@@ -1,4 +1,4 @@
-/* $Id: init.c,v 1.103 2001/11/19 19:03:08 davem Exp $
+/*
* linux/arch/sparc/mm/init.c
*
* Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
diff --git a/arch/sparc/mm/io-unit.c b/arch/sparc/mm/io-unit.c
index b86dfce..f167835 100644
--- a/arch/sparc/mm/io-unit.c
+++ b/arch/sparc/mm/io-unit.c
@@ -1,4 +1,4 @@
-/* $Id: io-unit.c,v 1.24 2001/12/17 07:05:09 davem Exp $
+/*
* io-unit.c: IO-UNIT specific routines for memory management.
*
* Copyright (C) 1997,1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
diff --git a/arch/sparc/mm/loadmmu.c b/arch/sparc/mm/loadmmu.c
index 2d9cd65..652be05 100644
--- a/arch/sparc/mm/loadmmu.c
+++ b/arch/sparc/mm/loadmmu.c
@@ -1,4 +1,4 @@
-/* $Id: loadmmu.c,v 1.56 2000/02/08 20:24:21 davem Exp $
+/*
* loadmmu.c: This code loads up all the mm function pointers once the
* machine type has been determined. It also sets the static
* mmu values such as PAGE_NONE, etc.
diff --git a/arch/sparc/mm/nosrmmu.c b/arch/sparc/mm/nosrmmu.c
index 9e21565..3701f70 100644
--- a/arch/sparc/mm/nosrmmu.c
+++ b/arch/sparc/mm/nosrmmu.c
@@ -1,4 +1,4 @@
-/* $Id: nosrmmu.c,v 1.5 1999/11/19 04:11:54 davem Exp $
+/*
* nosrmmu.c: This file is a bunch of dummies for sun4 compiles,
* so that it does not need srmmu and avoid ifdefs.
*
diff --git a/arch/sparc/mm/nosun4c.c b/arch/sparc/mm/nosun4c.c
index ea2e210..196263f 100644
--- a/arch/sparc/mm/nosun4c.c
+++ b/arch/sparc/mm/nosun4c.c
@@ -1,4 +1,4 @@
-/* $Id: nosun4c.c,v 1.3 2000/02/14 04:52:36 jj Exp $
+/*
* nosun4c.c: This file is a bunch of dummies for SMP compiles,
* so that it does not need sun4c and avoid ifdefs.
*
diff --git a/arch/sparc/mm/swift.S b/arch/sparc/mm/swift.S
index 9f4cd39..c801c39 100644
--- a/arch/sparc/mm/swift.S
+++ b/arch/sparc/mm/swift.S
@@ -1,4 +1,4 @@
-/* $Id: swift.S,v 1.9 2002/01/08 11:11:59 davem Exp $
+/*
* swift.S: MicroSparc-II mmu/cache operations.
*
* Copyright (C) 1999 David S. Miller (davem@redhat.com)
diff --git a/arch/sparc/mm/tsunami.S b/arch/sparc/mm/tsunami.S
index 4988e6a..db0d6de 100644
--- a/arch/sparc/mm/tsunami.S
+++ b/arch/sparc/mm/tsunami.S
@@ -1,4 +1,4 @@
-/* $Id: tsunami.S,v 1.7 2001/12/21 04:56:15 davem Exp $
+/*
* tsunami.S: High speed MicroSparc-I mmu/cache operations.
*
* Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu)
diff --git a/arch/sparc/mm/viking.S b/arch/sparc/mm/viking.S
index 754c622..6dfcc13 100644
--- a/arch/sparc/mm/viking.S
+++ b/arch/sparc/mm/viking.S
@@ -1,4 +1,4 @@
-/* $Id: viking.S,v 1.19 2001/12/21 04:56:15 davem Exp $
+/*
* viking.S: High speed Viking cache/mmu operations
*
* Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be)
diff --git a/arch/sparc/prom/Makefile b/arch/sparc/prom/Makefile
index 2b217ee..7f5eacf 100644
--- a/arch/sparc/prom/Makefile
+++ b/arch/sparc/prom/Makefile
@@ -1,4 +1,3 @@
-# $Id: Makefile,v 1.8 2000/12/15 00:41:22 davem Exp $
# Makefile for the Sun Boot PROM interface library under
# Linux.
#
diff --git a/arch/sparc/prom/bootstr.c b/arch/sparc/prom/bootstr.c
index cfdeac2..5a35c76 100644
--- a/arch/sparc/prom/bootstr.c
+++ b/arch/sparc/prom/bootstr.c
@@ -1,4 +1,4 @@
-/* $Id: bootstr.c,v 1.20 2000/02/08 20:24:23 davem Exp $
+/*
* bootstr.c: Boot string/argument acquisition from the PROM.
*
* Copyright(C) 1995 David S. Miller (davem@caip.rutgers.edu)
diff --git a/arch/sparc/prom/console.c b/arch/sparc/prom/console.c
index 2a007a7..790057a 100644
--- a/arch/sparc/prom/console.c
+++ b/arch/sparc/prom/console.c
@@ -1,4 +1,4 @@
-/* $Id: console.c,v 1.25 2001/10/30 04:54:22 davem Exp $
+/*
* console.c: Routines that deal with sending and receiving IO
* to/from the current console device using the PROM.
*
diff --git a/arch/sparc/prom/devmap.c b/arch/sparc/prom/devmap.c
index eb12073..1e51791 100644
--- a/arch/sparc/prom/devmap.c
+++ b/arch/sparc/prom/devmap.c
@@ -1,4 +1,4 @@
-/* $Id: devmap.c,v 1.7 2000/08/26 02:38:03 anton Exp $
+/*
* promdevmap.c: Map device/IO areas to virtual addresses.
*
* Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
diff --git a/arch/sparc/prom/devops.c b/arch/sparc/prom/devops.c
index 61919b5..9f1a95c 100644
--- a/arch/sparc/prom/devops.c
+++ b/arch/sparc/prom/devops.c
@@ -1,4 +1,4 @@
-/* $Id: devops.c,v 1.13 2000/08/26 02:38:03 anton Exp $
+/*
* devops.c: Device operations using the PROM.
*
* Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
diff --git a/arch/sparc/prom/init.c b/arch/sparc/prom/init.c
index 2fa3a47..729f870 100644
--- a/arch/sparc/prom/init.c
+++ b/arch/sparc/prom/init.c
@@ -1,4 +1,4 @@
-/* $Id: init.c,v 1.14 2000/01/29 01:09:12 anton Exp $
+/*
* init.c: Initialize internal variables used by the PROM
* library functions.
*
diff --git a/arch/sparc/prom/misc.c b/arch/sparc/prom/misc.c
index d9fb3af..49b5057 100644
--- a/arch/sparc/prom/misc.c
+++ b/arch/sparc/prom/misc.c
@@ -1,4 +1,4 @@
-/* $Id: misc.c,v 1.18 2000/08/26 02:38:03 anton Exp $
+/*
* misc.c: Miscellaneous prom functions that don't belong
* anywhere else.
*
diff --git a/arch/sparc/prom/mp.c b/arch/sparc/prom/mp.c
index 92fe373..4c4dc79 100644
--- a/arch/sparc/prom/mp.c
+++ b/arch/sparc/prom/mp.c
@@ -1,4 +1,4 @@
-/* $Id: mp.c,v 1.12 2000/08/26 02:38:03 anton Exp $
+/*
* mp.c: OpenBoot Prom Multiprocessor support routines. Don't call
* these on a UP or else you will halt and catch fire. ;)
*
diff --git a/arch/sparc/prom/palloc.c b/arch/sparc/prom/palloc.c
index 84ce8bc..20be339 100644
--- a/arch/sparc/prom/palloc.c
+++ b/arch/sparc/prom/palloc.c
@@ -1,4 +1,4 @@
-/* $Id: palloc.c,v 1.4 1996/04/25 06:09:48 davem Exp $
+/*
* palloc.c: Memory allocation from the Sun PROM.
*
* Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
diff --git a/arch/sparc/prom/ranges.c b/arch/sparc/prom/ranges.c
index a292032..f9b7def 100644
--- a/arch/sparc/prom/ranges.c
+++ b/arch/sparc/prom/ranges.c
@@ -1,4 +1,4 @@
-/* $Id: ranges.c,v 1.15 2001/12/19 00:29:51 davem Exp $
+/*
* ranges.c: Handle ranges in newer proms for obio/sbus.
*
* Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
diff --git a/arch/sparc/prom/segment.c b/arch/sparc/prom/segment.c
index 09d6460..04fd03a 100644
--- a/arch/sparc/prom/segment.c
+++ b/arch/sparc/prom/segment.c
@@ -1,4 +1,4 @@
-/* $Id: segment.c,v 1.7 2000/08/26 02:38:03 anton Exp $
+/*
* segment.c: Prom routine to map segments in other contexts before
* a standalone is completely mapped. This is for sun4 and
* sun4c architectures only.
diff --git a/arch/sparc/prom/tree.c b/arch/sparc/prom/tree.c
index 5ec2465..f228fe0 100644
--- a/arch/sparc/prom/tree.c
+++ b/arch/sparc/prom/tree.c
@@ -1,4 +1,4 @@
-/* $Id: tree.c,v 1.26 2000/08/26 02:38:03 anton Exp $
+/*
* tree.c: Basic device tree traversal/scanning for the Linux
* prom library.
*
diff --git a/arch/sparc64/Makefile b/arch/sparc64/Makefile
index 9cb75c8..4b8f2b0 100644
--- a/arch/sparc64/Makefile
+++ b/arch/sparc64/Makefile
@@ -1,4 +1,3 @@
-# $Id: Makefile,v 1.52 2002/02/09 19:49:31 davem Exp $
# sparc64/Makefile
#
# Makefile for the architecture dependent flags and dependencies on the
diff --git a/arch/sparc64/boot/Makefile b/arch/sparc64/boot/Makefile
index 6968a6d..0458b52 100644
--- a/arch/sparc64/boot/Makefile
+++ b/arch/sparc64/boot/Makefile
@@ -1,4 +1,3 @@
-# $Id: Makefile,v 1.4 1997/12/15 20:08:56 ecd Exp $
# Makefile for the Sparc64 boot stuff.
#
# Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
diff --git a/arch/sparc64/boot/piggyback.c b/arch/sparc64/boot/piggyback.c
index 36f9074..de364bf 100644
--- a/arch/sparc64/boot/piggyback.c
+++ b/arch/sparc64/boot/piggyback.c
@@ -1,4 +1,4 @@
-/* $Id: piggyback.c,v 1.2 2000/09/19 14:34:39 anton Exp $
+/*
Simple utility to make a single-image install kernel with initial ramdisk
for Sparc64 tftpbooting without need to set up nfs.
diff --git a/arch/sparc64/defconfig b/arch/sparc64/defconfig
index aff93c9..76eb832 100644
--- a/arch/sparc64/defconfig
+++ b/arch/sparc64/defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25
-# Sat Apr 26 03:11:06 2008
+# Linux kernel version: 2.6.26-rc2
+# Fri May 16 13:36:07 2008
#
CONFIG_SPARC=y
CONFIG_SPARC64=y
@@ -74,6 +74,7 @@
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
+CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
@@ -103,12 +104,14 @@
CONFIG_KRETPROBES=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
@@ -170,6 +173,7 @@
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_RESOURCES_64BIT=y
@@ -402,7 +406,6 @@
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_AEC62XX is not set
CONFIG_BLK_DEV_ALI15X3=y
-# CONFIG_WDC_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
@@ -609,6 +612,7 @@
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
+# CONFIG_SFC is not set
# CONFIG_TR is not set
#
@@ -717,6 +721,7 @@
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_DEVKMEM is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
@@ -793,12 +798,7 @@
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
-
-#
-# SPI support
-#
# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
@@ -873,8 +873,17 @@
#
# Multimedia devices
#
+
+#
+# Multimedia core support
+#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
+# CONFIG_VIDEO_MEDIA is not set
+
+#
+# Multimedia drivers
+#
# CONFIG_DAB is not set
#
@@ -893,8 +902,8 @@
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
-CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
@@ -1100,6 +1109,10 @@
#
#
+# SoC Audio for the Texas Instruments OMAP
+#
+
+#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
@@ -1135,10 +1148,12 @@
#
# USB Host Controller Drivers
#
+# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -1173,6 +1188,7 @@
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
@@ -1214,6 +1230,7 @@
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_UIO is not set
@@ -1367,6 +1384,7 @@
CONFIG_PRINTK_TIME=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
@@ -1377,6 +1395,7 @@
# CONFIG_SCHED_DEBUG is not set
CONFIG_SCHEDSTATS=y
# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
@@ -1402,6 +1421,8 @@
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_DCFLUSH is not set
# CONFIG_STACK_DEBUG is not set
@@ -1503,6 +1524,7 @@
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
# CONFIG_CRC_ITU_T is not set
diff --git a/arch/sparc64/kernel/dtlb_prot.S b/arch/sparc64/kernel/dtlb_prot.S
index e0a9201..b2c2c5b 100644
--- a/arch/sparc64/kernel/dtlb_prot.S
+++ b/arch/sparc64/kernel/dtlb_prot.S
@@ -1,4 +1,4 @@
-/* $Id: dtlb_prot.S,v 1.22 2001/04/11 23:40:32 davem Exp $
+/*
* dtlb_prot.S: DTLB protection trap strategy.
* This is included directly into the trap table.
*
diff --git a/arch/sparc64/kernel/ebus.c b/arch/sparc64/kernel/ebus.c
index bc26322..c49d038 100644
--- a/arch/sparc64/kernel/ebus.c
+++ b/arch/sparc64/kernel/ebus.c
@@ -1,4 +1,4 @@
-/* $Id: ebus.c,v 1.64 2001/11/08 04:41:33 davem Exp $
+/*
* ebus.c: PCI to EBus bridge device.
*
* Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be)
diff --git a/arch/sparc64/kernel/etrap.S b/arch/sparc64/kernel/etrap.S
index f25e1da..29ce489 100644
--- a/arch/sparc64/kernel/etrap.S
+++ b/arch/sparc64/kernel/etrap.S
@@ -1,4 +1,4 @@
-/* $Id: etrap.S,v 1.46 2002/02/09 19:49:30 davem Exp $
+/*
* etrap.S: Preparing for entry into the kernel on Sparc V9.
*
* Copyright (C) 1996, 1997 David S. Miller (davem@caip.rutgers.edu)
diff --git a/arch/sparc64/kernel/idprom.c b/arch/sparc64/kernel/idprom.c
index 3b6789e..5b45a80 100644
--- a/arch/sparc64/kernel/idprom.c
+++ b/arch/sparc64/kernel/idprom.c
@@ -1,4 +1,4 @@
-/* $Id: idprom.c,v 1.3 1999/08/31 06:54:53 davem Exp $
+/*
* idprom.c: Routines to load the idprom into kernel addresses and
* interpret the data contained within.
*
diff --git a/arch/sparc64/kernel/init_task.c b/arch/sparc64/kernel/init_task.c
index 90007cf..d2b3123 100644
--- a/arch/sparc64/kernel/init_task.c
+++ b/arch/sparc64/kernel/init_task.c
@@ -10,7 +10,6 @@
#include <asm/processor.h>
static struct fs_struct init_fs = INIT_FS;
-static struct files_struct init_files = INIT_FILES;
static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
struct mm_struct init_mm = INIT_MM(init_mm);
diff --git a/arch/sparc64/kernel/process.c b/arch/sparc64/kernel/process.c
index 4129c04..2084f81 100644
--- a/arch/sparc64/kernel/process.c
+++ b/arch/sparc64/kernel/process.c
@@ -1,6 +1,6 @@
/* arch/sparc64/kernel/process.c
*
- * Copyright (C) 1995, 1996 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1995, 1996, 2008 David S. Miller (davem@davemloft.net)
* Copyright (C) 1996 Eddie C. Dost (ecd@skynet.be)
* Copyright (C) 1997, 1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
*/
@@ -30,6 +30,7 @@
#include <linux/init.h>
#include <linux/cpu.h>
#include <linux/elfcore.h>
+#include <linux/sysrq.h>
#include <asm/oplib.h>
#include <asm/uaccess.h>
@@ -49,6 +50,8 @@
#include <asm/sstate.h>
#include <asm/reboot.h>
#include <asm/syscalls.h>
+#include <asm/irq_regs.h>
+#include <asm/smp.h>
/* #define VERBOSE_SHOWREGS */
@@ -298,6 +301,118 @@
#endif
}
+#ifdef CONFIG_MAGIC_SYSRQ
+struct global_reg_snapshot global_reg_snapshot[NR_CPUS];
+static DEFINE_SPINLOCK(global_reg_snapshot_lock);
+
+static void __global_reg_self(struct thread_info *tp, struct pt_regs *regs,
+ int this_cpu)
+{
+ flushw_all();
+
+ global_reg_snapshot[this_cpu].tstate = regs->tstate;
+ global_reg_snapshot[this_cpu].tpc = regs->tpc;
+ global_reg_snapshot[this_cpu].tnpc = regs->tnpc;
+ global_reg_snapshot[this_cpu].o7 = regs->u_regs[UREG_I7];
+
+ if (regs->tstate & TSTATE_PRIV) {
+ struct reg_window *rw;
+
+ rw = (struct reg_window *)
+ (regs->u_regs[UREG_FP] + STACK_BIAS);
+ global_reg_snapshot[this_cpu].i7 = rw->ins[6];
+ } else
+ global_reg_snapshot[this_cpu].i7 = 0;
+
+ global_reg_snapshot[this_cpu].thread = tp;
+}
+
+/* In order to avoid hangs we do not try to synchronize with the
+ * global register dump client cpus. The last store they make is to
+ * the thread pointer, so do a short poll waiting for that to become
+ * non-NULL.
+ */
+static void __global_reg_poll(struct global_reg_snapshot *gp)
+{
+ int limit = 0;
+
+ while (!gp->thread && ++limit < 100) {
+ barrier();
+ udelay(1);
+ }
+}
+
+static void sysrq_handle_globreg(int key, struct tty_struct *tty)
+{
+ struct thread_info *tp = current_thread_info();
+ struct pt_regs *regs = get_irq_regs();
+#ifdef CONFIG_KALLSYMS
+ char buffer[KSYM_SYMBOL_LEN];
+#endif
+ unsigned long flags;
+ int this_cpu, cpu;
+
+ if (!regs)
+ regs = tp->kregs;
+
+ spin_lock_irqsave(&global_reg_snapshot_lock, flags);
+
+ memset(global_reg_snapshot, 0, sizeof(global_reg_snapshot));
+
+ this_cpu = raw_smp_processor_id();
+
+ __global_reg_self(tp, regs, this_cpu);
+
+ smp_fetch_global_regs();
+
+ for_each_online_cpu(cpu) {
+ struct global_reg_snapshot *gp = &global_reg_snapshot[cpu];
+ struct thread_info *tp;
+
+ __global_reg_poll(gp);
+
+ tp = gp->thread;
+ printk("%c CPU[%3d]: TSTATE[%016lx] TPC[%016lx] TNPC[%016lx] TASK[%s:%d]\n",
+ (cpu == this_cpu ? '*' : ' '), cpu,
+ gp->tstate, gp->tpc, gp->tnpc,
+ ((tp && tp->task) ? tp->task->comm : "NULL"),
+ ((tp && tp->task) ? tp->task->pid : -1));
+#ifdef CONFIG_KALLSYMS
+ if (gp->tstate & TSTATE_PRIV) {
+ sprint_symbol(buffer, gp->tpc);
+ printk(" TPC[%s] ", buffer);
+ sprint_symbol(buffer, gp->o7);
+ printk("O7[%s] ", buffer);
+ sprint_symbol(buffer, gp->i7);
+ printk("I7[%s]\n", buffer);
+ } else
+#endif
+ {
+ printk(" TPC[%lx] O7[%lx] I7[%lx]\n",
+ gp->tpc, gp->o7, gp->i7);
+ }
+ }
+
+ memset(global_reg_snapshot, 0, sizeof(global_reg_snapshot));
+
+ spin_unlock_irqrestore(&global_reg_snapshot_lock, flags);
+}
+
+static struct sysrq_key_op sparc_globalreg_op = {
+ .handler = sysrq_handle_globreg,
+ .help_msg = "Globalregs",
+ .action_msg = "Show Global CPU Regs",
+};
+
+static int __init sparc_globreg_init(void)
+{
+ return register_sysrq_key('y', &sparc_globalreg_op);
+}
+
+core_initcall(sparc_globreg_init);
+
+#endif
+
unsigned long thread_saved_pc(struct task_struct *tsk)
{
struct thread_info *ti = task_thread_info(tsk);
@@ -542,20 +657,39 @@
struct task_struct *p, struct pt_regs *regs)
{
struct thread_info *t = task_thread_info(p);
+ struct sparc_stackf *parent_sf;
+ unsigned long child_stack_sz;
char *child_trap_frame;
+ int kernel_thread;
+
+ kernel_thread = (regs->tstate & TSTATE_PRIV) ? 1 : 0;
+ parent_sf = ((struct sparc_stackf *) regs) - 1;
/* Calculate offset to stack_frame & pt_regs */
- child_trap_frame = task_stack_page(p) + (THREAD_SIZE - (TRACEREG_SZ+STACKFRAME_SZ));
- memcpy(child_trap_frame, (((struct sparc_stackf *)regs)-1), (TRACEREG_SZ+STACKFRAME_SZ));
+ child_stack_sz = ((STACKFRAME_SZ + TRACEREG_SZ) +
+ (kernel_thread ? STACKFRAME_SZ : 0));
+ child_trap_frame = (task_stack_page(p) +
+ (THREAD_SIZE - child_stack_sz));
+ memcpy(child_trap_frame, parent_sf, child_stack_sz);
- t->flags = (t->flags & ~((0xffUL << TI_FLAG_CWP_SHIFT) | (0xffUL << TI_FLAG_CURRENT_DS_SHIFT))) |
+ t->flags = (t->flags & ~((0xffUL << TI_FLAG_CWP_SHIFT) |
+ (0xffUL << TI_FLAG_CURRENT_DS_SHIFT))) |
(((regs->tstate + 1) & TSTATE_CWP) << TI_FLAG_CWP_SHIFT);
t->new_child = 1;
t->ksp = ((unsigned long) child_trap_frame) - STACK_BIAS;
- t->kregs = (struct pt_regs *)(child_trap_frame+sizeof(struct sparc_stackf));
+ t->kregs = (struct pt_regs *) (child_trap_frame +
+ sizeof(struct sparc_stackf));
t->fpsaved[0] = 0;
- if (regs->tstate & TSTATE_PRIV) {
+ if (kernel_thread) {
+ struct sparc_stackf *child_sf = (struct sparc_stackf *)
+ (child_trap_frame + (STACKFRAME_SZ + TRACEREG_SZ));
+
+ /* Zero terminate the stack backtrace. */
+ child_sf->fp = NULL;
+ t->kregs->u_regs[UREG_FP] =
+ ((unsigned long) child_sf) - STACK_BIAS;
+
/* Special case, if we are spawning a kernel thread from
* a userspace task (via KMOD, NFS, or similar) we must
* disable performance counters in the child because the
@@ -566,12 +700,7 @@
t->pcr_reg = 0;
t->flags &= ~_TIF_PERFCTR;
}
- t->kregs->u_regs[UREG_FP] = t->ksp;
t->flags |= ((long)ASI_P << TI_FLAG_CURRENT_DS_SHIFT);
- flush_register_windows();
- memcpy((void *)(t->ksp + STACK_BIAS),
- (void *)(regs->u_regs[UREG_FP] + STACK_BIAS),
- sizeof(struct sparc_stackf));
t->kregs->u_regs[UREG_G6] = (unsigned long) t;
t->kregs->u_regs[UREG_G4] = (unsigned long) t->task;
} else {
diff --git a/arch/sparc64/kernel/rtrap.S b/arch/sparc64/kernel/rtrap.S
index b9b785f..c6fc695 100644
--- a/arch/sparc64/kernel/rtrap.S
+++ b/arch/sparc64/kernel/rtrap.S
@@ -1,4 +1,4 @@
-/* $Id: rtrap.S,v 1.61 2002/02/09 19:49:31 davem Exp $
+/*
* rtrap.S: Preparing for return from trap on Sparc V9.
*
* Copyright (C) 1997,1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
@@ -46,7 +46,7 @@
wrpr %g0, RTRAP_PSTATE_IRQOFF, %pstate
ldx [%g6 + TI_FLAGS], %l0
-1: andcc %l0, (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK), %g0
+1: andcc %l0, _TIF_SIGPENDING, %g0
be,pt %xcc, __handle_user_windows_continue
nop
mov %l5, %o1
@@ -86,7 +86,7 @@
wrpr %g0, RTRAP_PSTATE, %pstate
wrpr %g0, RTRAP_PSTATE_IRQOFF, %pstate
ldx [%g6 + TI_FLAGS], %l0
-1: andcc %l0, (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK), %g0
+1: andcc %l0, _TIF_SIGPENDING, %g0
be,pt %xcc, __handle_perfctrs_continue
sethi %hi(TSTATE_PEF), %o0
@@ -195,7 +195,7 @@
andcc %l1, %o0, %g0
andcc %l0, _TIF_NEED_RESCHED, %g0
bne,pn %xcc, __handle_preemption
- andcc %l0, (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK), %g0
+ andcc %l0, _TIF_SIGPENDING, %g0
bne,pn %xcc, __handle_signal
__handle_signal_continue:
ldub [%g6 + TI_WSAVED], %o2
@@ -363,6 +363,7 @@
brz,pn %g1, kern_rtt_fill
nop
kern_rtt_restore:
+ stw %g0, [%sp + PTREGS_OFF + PT_V9_MAGIC]
restore
retry
diff --git a/arch/sparc64/kernel/sbus.c b/arch/sparc64/kernel/sbus.c
index fa2827c..e33a8a6 100644
--- a/arch/sparc64/kernel/sbus.c
+++ b/arch/sparc64/kernel/sbus.c
@@ -1,4 +1,4 @@
-/* $Id: sbus.c,v 1.19 2002/01/23 11:27:32 davem Exp $
+/*
* sbus.c: UltraSparc SBUS controller support.
*
* Copyright (C) 1999 David S. Miller (davem@redhat.com)
diff --git a/arch/sparc64/kernel/setup.c b/arch/sparc64/kernel/setup.c
index da5e6ee..c8b03a4 100644
--- a/arch/sparc64/kernel/setup.c
+++ b/arch/sparc64/kernel/setup.c
@@ -1,4 +1,4 @@
-/* $Id: setup.c,v 1.72 2002/02/09 19:49:30 davem Exp $
+/*
* linux/arch/sparc64/kernel/setup.c
*
* Copyright (C) 1995,1996 David S. Miller (davem@caip.rutgers.edu)
diff --git a/arch/sparc64/kernel/signal.c b/arch/sparc64/kernel/signal.c
index 2378482..9667e96 100644
--- a/arch/sparc64/kernel/signal.c
+++ b/arch/sparc64/kernel/signal.c
@@ -1,4 +1,4 @@
-/* $Id: signal.c,v 1.60 2002/02/09 19:49:31 davem Exp $
+/*
* arch/sparc64/kernel/signal.c
*
* Copyright (C) 1991, 1992 Linus Torvalds
@@ -247,7 +247,9 @@
current->state = TASK_INTERRUPTIBLE;
schedule();
- set_thread_flag(TIF_RESTORE_SIGMASK);
+
+ set_restore_sigmask();
+
return -ERESTARTNOHAND;
}
@@ -537,7 +539,7 @@
} else
restart_syscall = 0;
- if (test_thread_flag(TIF_RESTORE_SIGMASK))
+ if (current_thread_info()->status & TS_RESTORE_SIGMASK)
oldset = ¤t->saved_sigmask;
else
oldset = ¤t->blocked;
@@ -566,13 +568,12 @@
syscall_restart(orig_i0, regs, &ka.sa);
handle_signal(signr, &ka, &info, oldset, regs);
- /* a signal was successfully delivered; the saved
+ /* A signal was successfully delivered; the saved
* sigmask will have been stored in the signal frame,
* and will be restored by sigreturn, so we can simply
- * clear the TIF_RESTORE_SIGMASK flag.
+ * clear the TS_RESTORE_SIGMASK flag.
*/
- if (test_thread_flag(TIF_RESTORE_SIGMASK))
- clear_thread_flag(TIF_RESTORE_SIGMASK);
+ current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
return;
}
if (restart_syscall &&
@@ -591,17 +592,17 @@
regs->tnpc -= 4;
}
- /* if there's no signal to deliver, we just put the saved sigmask
+ /* If there's no signal to deliver, we just put the saved sigmask
* back
*/
- if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
- clear_thread_flag(TIF_RESTORE_SIGMASK);
+ if (current_thread_info()->status & TS_RESTORE_SIGMASK) {
+ current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL);
}
}
void do_notify_resume(struct pt_regs *regs, unsigned long orig_i0, unsigned long thread_info_flags)
{
- if (thread_info_flags & (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK))
+ if (thread_info_flags & _TIF_SIGPENDING)
do_signal(regs, orig_i0);
}
diff --git a/arch/sparc64/kernel/signal32.c b/arch/sparc64/kernel/signal32.c
index 3f19e9a..97cdd1b 100644
--- a/arch/sparc64/kernel/signal32.c
+++ b/arch/sparc64/kernel/signal32.c
@@ -788,13 +788,12 @@
syscall_restart32(orig_i0, regs, &ka.sa);
handle_signal32(signr, &ka, &info, oldset, regs);
- /* a signal was successfully delivered; the saved
+ /* A signal was successfully delivered; the saved
* sigmask will have been stored in the signal frame,
* and will be restored by sigreturn, so we can simply
- * clear the TIF_RESTORE_SIGMASK flag.
+ * clear the TS_RESTORE_SIGMASK flag.
*/
- if (test_thread_flag(TIF_RESTORE_SIGMASK))
- clear_thread_flag(TIF_RESTORE_SIGMASK);
+ current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
return;
}
if (restart_syscall &&
@@ -813,11 +812,11 @@
regs->tnpc -= 4;
}
- /* if there's no signal to deliver, we just put the saved sigmask
+ /* If there's no signal to deliver, we just put the saved sigmask
* back
*/
- if (test_thread_flag(TIF_RESTORE_SIGMASK)) {
- clear_thread_flag(TIF_RESTORE_SIGMASK);
+ if (current_thread_info()->status & TS_RESTORE_SIGMASK) {
+ current_thread_info()->status &= ~TS_RESTORE_SIGMASK;
sigprocmask(SIG_SETMASK, ¤t->saved_sigmask, NULL);
}
}
diff --git a/arch/sparc64/kernel/smp.c b/arch/sparc64/kernel/smp.c
index 0d6403a..fa63c68 100644
--- a/arch/sparc64/kernel/smp.c
+++ b/arch/sparc64/kernel/smp.c
@@ -900,6 +900,9 @@
extern unsigned long xcall_flush_tlb_pending;
extern unsigned long xcall_flush_tlb_kernel_range;
extern unsigned long xcall_report_regs;
+#ifdef CONFIG_MAGIC_SYSRQ
+extern unsigned long xcall_fetch_glob_regs;
+#endif
extern unsigned long xcall_receive_signal;
extern unsigned long xcall_new_mmu_context_version;
#ifdef CONFIG_KGDB
@@ -1080,6 +1083,13 @@
smp_cross_call(&xcall_report_regs, 0, 0, 0);
}
+#ifdef CONFIG_MAGIC_SYSRQ
+void smp_fetch_global_regs(void)
+{
+ smp_cross_call(&xcall_fetch_glob_regs, 0, 0, 0);
+}
+#endif
+
/* We know that the window frames of the user have been flushed
* to the stack before we get here because all callers of us
* are flush_tlb_*() routines, and these run after flush_cache_*()
diff --git a/arch/sparc64/kernel/stacktrace.c b/arch/sparc64/kernel/stacktrace.c
index 01b52f5..c73ce3f 100644
--- a/arch/sparc64/kernel/stacktrace.c
+++ b/arch/sparc64/kernel/stacktrace.c
@@ -19,7 +19,7 @@
fp = ksp + STACK_BIAS;
thread_base = (unsigned long) tp;
do {
- struct reg_window *rw;
+ struct sparc_stackf *sf;
struct pt_regs *regs;
unsigned long pc;
@@ -28,15 +28,17 @@
fp >= (thread_base + THREAD_SIZE))
break;
- rw = (struct reg_window *) fp;
- regs = (struct pt_regs *) (rw + 1);
+ sf = (struct sparc_stackf *) fp;
+ regs = (struct pt_regs *) (sf + 1);
if ((regs->magic & ~0x1ff) == PT_REGS_MAGIC) {
+ if (!(regs->tstate & TSTATE_PRIV))
+ break;
pc = regs->tpc;
fp = regs->u_regs[UREG_I6] + STACK_BIAS;
} else {
- pc = rw->ins[7];
- fp = rw->ins[6] + STACK_BIAS;
+ pc = sf->callers_pc;
+ fp = (unsigned long)sf->fp + STACK_BIAS;
}
if (trace->skip > 0)
diff --git a/arch/sparc64/kernel/starfire.c b/arch/sparc64/kernel/starfire.c
index b930fee..7461581 100644
--- a/arch/sparc64/kernel/starfire.c
+++ b/arch/sparc64/kernel/starfire.c
@@ -1,4 +1,4 @@
-/* $Id: starfire.c,v 1.10 2001/04/14 21:13:45 davem Exp $
+/*
* starfire.c: Starfire/E10000 support.
*
* Copyright (C) 1998 David S. Miller (davem@redhat.com)
diff --git a/arch/sparc64/kernel/sys32.S b/arch/sparc64/kernel/sys32.S
index 010a737..ade18ba 100644
--- a/arch/sparc64/kernel/sys32.S
+++ b/arch/sparc64/kernel/sys32.S
@@ -1,4 +1,4 @@
-/* $Id: sys32.S,v 1.12 2000/03/24 04:17:37 davem Exp $
+/*
* sys32.S: I-cache tricks for 32-bit compatibility layer simple
* conversions.
*
diff --git a/arch/sparc64/kernel/sys_sparc.c b/arch/sparc64/kernel/sys_sparc.c
index 0dbc941..ac1bff5 100644
--- a/arch/sparc64/kernel/sys_sparc.c
+++ b/arch/sparc64/kernel/sys_sparc.c
@@ -542,8 +542,7 @@
return ret;
}
-int sparc64_mmap_check(unsigned long addr, unsigned long len,
- unsigned long flags)
+int sparc64_mmap_check(unsigned long addr, unsigned long len)
{
if (test_thread_flag(TIF_32BIT)) {
if (len >= STACK_TOP32)
@@ -609,46 +608,19 @@
unsigned long old_len, unsigned long new_len,
unsigned long flags, unsigned long new_addr)
{
- struct vm_area_struct *vma;
unsigned long ret = -EINVAL;
if (test_thread_flag(TIF_32BIT))
goto out;
if (unlikely(new_len >= VA_EXCLUDE_START))
goto out;
- if (unlikely(invalid_64bit_range(addr, old_len)))
+ if (unlikely(sparc64_mmap_check(addr, old_len)))
+ goto out;
+ if (unlikely(sparc64_mmap_check(new_addr, new_len)))
goto out;
down_write(¤t->mm->mmap_sem);
- if (flags & MREMAP_FIXED) {
- if (invalid_64bit_range(new_addr, new_len))
- goto out_sem;
- } else if (invalid_64bit_range(addr, new_len)) {
- unsigned long map_flags = 0;
- struct file *file = NULL;
-
- ret = -ENOMEM;
- if (!(flags & MREMAP_MAYMOVE))
- goto out_sem;
-
- vma = find_vma(current->mm, addr);
- if (vma) {
- if (vma->vm_flags & VM_SHARED)
- map_flags |= MAP_SHARED;
- file = vma->vm_file;
- }
-
- /* MREMAP_FIXED checked above. */
- new_addr = get_unmapped_area(file, addr, new_len,
- vma ? vma->vm_pgoff : 0,
- map_flags);
- ret = new_addr;
- if (new_addr & ~PAGE_MASK)
- goto out_sem;
- flags |= MREMAP_FIXED;
- }
ret = do_mremap(addr, old_len, new_len, flags, new_addr);
-out_sem:
up_write(¤t->mm->mmap_sem);
out:
return ret;
diff --git a/arch/sparc64/kernel/sys_sparc32.c b/arch/sparc64/kernel/sys_sparc32.c
index 1aa4288..ba5bd62 100644
--- a/arch/sparc64/kernel/sys_sparc32.c
+++ b/arch/sparc64/kernel/sys_sparc32.c
@@ -867,44 +867,15 @@
unsigned long old_len, unsigned long new_len,
unsigned long flags, u32 __new_addr)
{
- struct vm_area_struct *vma;
unsigned long ret = -EINVAL;
unsigned long new_addr = __new_addr;
- if (old_len > STACK_TOP32 || new_len > STACK_TOP32)
+ if (unlikely(sparc64_mmap_check(addr, old_len)))
goto out;
- if (addr > STACK_TOP32 - old_len)
+ if (unlikely(sparc64_mmap_check(new_addr, new_len)))
goto out;
down_write(¤t->mm->mmap_sem);
- if (flags & MREMAP_FIXED) {
- if (new_addr > STACK_TOP32 - new_len)
- goto out_sem;
- } else if (addr > STACK_TOP32 - new_len) {
- unsigned long map_flags = 0;
- struct file *file = NULL;
-
- ret = -ENOMEM;
- if (!(flags & MREMAP_MAYMOVE))
- goto out_sem;
-
- vma = find_vma(current->mm, addr);
- if (vma) {
- if (vma->vm_flags & VM_SHARED)
- map_flags |= MAP_SHARED;
- file = vma->vm_file;
- }
-
- /* MREMAP_FIXED checked above. */
- new_addr = get_unmapped_area(file, addr, new_len,
- vma ? vma->vm_pgoff : 0,
- map_flags);
- ret = new_addr;
- if (new_addr & ~PAGE_MASK)
- goto out_sem;
- flags |= MREMAP_FIXED;
- }
ret = do_mremap(addr, old_len, new_len, flags, new_addr);
-out_sem:
up_write(¤t->mm->mmap_sem);
out:
return ret;
diff --git a/arch/sparc64/kernel/trampoline.S b/arch/sparc64/kernel/trampoline.S
index 56ff552..704a3af 100644
--- a/arch/sparc64/kernel/trampoline.S
+++ b/arch/sparc64/kernel/trampoline.S
@@ -1,4 +1,4 @@
-/* $Id: trampoline.S,v 1.26 2002/02/09 19:49:30 davem Exp $
+/*
* trampoline.S: Jump start slave processors on sparc64.
*
* Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu)
diff --git a/arch/sparc64/kernel/traps.c b/arch/sparc64/kernel/traps.c
index d9b8d46..3697492 100644
--- a/arch/sparc64/kernel/traps.c
+++ b/arch/sparc64/kernel/traps.c
@@ -2116,7 +2116,7 @@
printk("\n");
#endif
do {
- struct reg_window *rw;
+ struct sparc_stackf *sf;
struct pt_regs *regs;
unsigned long pc;
@@ -2124,15 +2124,17 @@
if (fp < (thread_base + sizeof(struct thread_info)) ||
fp >= (thread_base + THREAD_SIZE))
break;
- rw = (struct reg_window *)fp;
- regs = (struct pt_regs *) (rw + 1);
+ sf = (struct sparc_stackf *) fp;
+ regs = (struct pt_regs *) (sf + 1);
if ((regs->magic & ~0x1ff) == PT_REGS_MAGIC) {
+ if (!(regs->tstate & TSTATE_PRIV))
+ break;
pc = regs->tpc;
fp = regs->u_regs[UREG_I6] + STACK_BIAS;
} else {
- pc = rw->ins[7];
- fp = rw->ins[6] + STACK_BIAS;
+ pc = sf->callers_pc;
+ fp = (unsigned long)sf->fp + STACK_BIAS;
}
printk(" [%016lx] ", pc);
diff --git a/arch/sparc64/kernel/unaligned.c b/arch/sparc64/kernel/unaligned.c
index 1a511e9f..afa7fc4 100644
--- a/arch/sparc64/kernel/unaligned.c
+++ b/arch/sparc64/kernel/unaligned.c
@@ -1,4 +1,4 @@
-/* $Id: unaligned.c,v 1.24 2002/02/09 19:49:31 davem Exp $
+/*
* unaligned.c: Unaligned load/store trap handling with special
* cases for the kernel to do them more quickly.
*
diff --git a/arch/sparc64/lib/PeeCeeI.c b/arch/sparc64/lib/PeeCeeI.c
index 3c6cfbb..8b313f1 100644
--- a/arch/sparc64/lib/PeeCeeI.c
+++ b/arch/sparc64/lib/PeeCeeI.c
@@ -1,4 +1,4 @@
-/* $Id: PeeCeeI.c,v 1.4 1999/09/06 01:17:35 davem Exp $
+/*
* PeeCeeI.c: The emerging standard...
*
* Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu)
diff --git a/arch/sparc64/lib/VISsave.S b/arch/sparc64/lib/VISsave.S
index a0ded5c..b320ae9 100644
--- a/arch/sparc64/lib/VISsave.S
+++ b/arch/sparc64/lib/VISsave.S
@@ -1,4 +1,4 @@
-/* $Id: VISsave.S,v 1.6 2002/02/09 19:49:30 davem Exp $
+/*
* VISsave.S: Code for saving FPU register state for
* VIS routines. One should not call this directly,
* but use macros provided in <asm/visasm.h>.
diff --git a/arch/sparc64/lib/memcmp.S b/arch/sparc64/lib/memcmp.S
index c90ad96..d3fdaa8 100644
--- a/arch/sparc64/lib/memcmp.S
+++ b/arch/sparc64/lib/memcmp.S
@@ -1,4 +1,4 @@
-/* $Id: memcmp.S,v 1.3 2000/03/23 07:51:08 davem Exp $
+/*
* Sparc64 optimized memcmp code.
*
* Copyright (C) 1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
diff --git a/arch/sparc64/lib/memscan.S b/arch/sparc64/lib/memscan.S
index 5e72d49..5686dfa 100644
--- a/arch/sparc64/lib/memscan.S
+++ b/arch/sparc64/lib/memscan.S
@@ -1,4 +1,4 @@
-/* $Id: memscan.S,v 1.3 2000/01/31 04:59:10 davem Exp $
+/*
* memscan.S: Optimized memscan for Sparc64.
*
* Copyright (C) 1997,1998 Jakub Jelinek (jj@ultra.linux.cz)
diff --git a/arch/sparc64/lib/strncmp.S b/arch/sparc64/lib/strncmp.S
index 6f14f53..980e837 100644
--- a/arch/sparc64/lib/strncmp.S
+++ b/arch/sparc64/lib/strncmp.S
@@ -1,4 +1,4 @@
-/* $Id: strncmp.S,v 1.2 1997/03/11 17:51:44 jj Exp $
+/*
* Sparc64 optimized strncmp code.
*
* Copyright (C) 1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
diff --git a/arch/sparc64/lib/strncpy_from_user.S b/arch/sparc64/lib/strncpy_from_user.S
index b2f499f..511c8f1 100644
--- a/arch/sparc64/lib/strncpy_from_user.S
+++ b/arch/sparc64/lib/strncpy_from_user.S
@@ -1,4 +1,4 @@
-/* $Id: strncpy_from_user.S,v 1.6 1999/05/25 16:53:05 jj Exp $
+/*
* strncpy_from_user.S: Sparc64 strncpy from userspace.
*
* Copyright (C) 1997, 1999 Jakub Jelinek (jj@ultra.linux.cz)
diff --git a/arch/sparc64/math-emu/math.c b/arch/sparc64/math-emu/math.c
index 6ee496c..add053e 100644
--- a/arch/sparc64/math-emu/math.c
+++ b/arch/sparc64/math-emu/math.c
@@ -1,4 +1,4 @@
-/* $Id: math.c,v 1.11 1999/12/20 05:02:25 davem Exp $
+/*
* arch/sparc64/math-emu/math.c
*
* Copyright (C) 1997,1999 Jakub Jelinek (jj@ultra.linux.cz)
diff --git a/arch/sparc64/math-emu/sfp-util.h b/arch/sparc64/math-emu/sfp-util.h
index 31e4747..425d3cf 100644
--- a/arch/sparc64/math-emu/sfp-util.h
+++ b/arch/sparc64/math-emu/sfp-util.h
@@ -1,4 +1,4 @@
-/* $Id: sfp-util.h,v 1.5 2001/06/10 06:48:46 davem Exp $
+/*
* arch/sparc64/math-emu/sfp-util.h
*
* Copyright (C) 1999 Jakub Jelinek (jj@ultra.linux.cz)
diff --git a/arch/sparc64/mm/Makefile b/arch/sparc64/mm/Makefile
index e415bf9..68d04c0 100644
--- a/arch/sparc64/mm/Makefile
+++ b/arch/sparc64/mm/Makefile
@@ -1,4 +1,3 @@
-# $Id: Makefile,v 1.8 2000/12/14 22:57:25 davem Exp $
# Makefile for the linux Sparc64-specific parts of the memory manager.
#
diff --git a/arch/sparc64/mm/fault.c b/arch/sparc64/mm/fault.c
index 2650d0d..236f4d2 100644
--- a/arch/sparc64/mm/fault.c
+++ b/arch/sparc64/mm/fault.c
@@ -1,4 +1,4 @@
-/* $Id: fault.c,v 1.59 2002/02/09 19:49:31 davem Exp $
+/*
* arch/sparc64/mm/fault.c: Page fault handlers for the 64-bit Sparc.
*
* Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
diff --git a/arch/sparc64/mm/generic.c b/arch/sparc64/mm/generic.c
index af9d81d..f362c20 100644
--- a/arch/sparc64/mm/generic.c
+++ b/arch/sparc64/mm/generic.c
@@ -1,4 +1,4 @@
-/* $Id: generic.c,v 1.18 2001/12/21 04:56:15 davem Exp $
+/*
* generic.c: Generic Sparc mm routines that are not dependent upon
* MMU type but are Sparc specific.
*
diff --git a/arch/sparc64/mm/init.c b/arch/sparc64/mm/init.c
index ec3e2c7..84898c4 100644
--- a/arch/sparc64/mm/init.c
+++ b/arch/sparc64/mm/init.c
@@ -1,4 +1,4 @@
-/* $Id: init.c,v 1.209 2002/02/09 19:49:31 davem Exp $
+/*
* arch/sparc64/mm/init.c
*
* Copyright (C) 1996-1999 David S. Miller (davem@caip.rutgers.edu)
@@ -610,8 +610,6 @@
static void __init inherit_prom_mappings(void)
{
- read_obp_translations();
-
/* Now fixup OBP's idea about where we really are mapped. */
printk("Remapping the kernel... ");
remap_kernel();
@@ -770,7 +768,7 @@
initrd_start = ramdisk_image;
initrd_end = ramdisk_image + sparc_ramdisk_size;
- lmb_reserve(initrd_start, initrd_end);
+ lmb_reserve(initrd_start, sparc_ramdisk_size);
initrd_start += PAGE_OFFSET;
initrd_end += PAGE_OFFSET;
@@ -1747,7 +1745,17 @@
lmb_init();
- /* Find available physical memory... */
+ /* Find available physical memory...
+ *
+ * Read it twice in order to work around a bug in openfirmware.
+ * The call to grab this table itself can cause openfirmware to
+ * allocate memory, which in turn can take away some space from
+ * the list of available memory. Reading it twice makes sure
+ * we really do get the final value.
+ */
+ read_obp_translations();
+ read_obp_memory("reg", &pall[0], &pall_ents);
+ read_obp_memory("available", &pavail[0], &pavail_ents);
read_obp_memory("available", &pavail[0], &pavail_ents);
phys_base = 0xffffffffffffffffUL;
@@ -1788,8 +1796,6 @@
inherit_prom_mappings();
- read_obp_memory("reg", &pall[0], &pall_ents);
-
init_kpte_bitmap();
/* Ok, we can use our TLB miss and window trap handlers safely. */
diff --git a/arch/sparc64/mm/ultra.S b/arch/sparc64/mm/ultra.S
index 796e005..9bb2d90 100644
--- a/arch/sparc64/mm/ultra.S
+++ b/arch/sparc64/mm/ultra.S
@@ -1,7 +1,7 @@
-/* $Id: ultra.S,v 1.72 2002/02/09 19:49:31 davem Exp $
+/*
* ultra.S: Don't expand these all over the place...
*
- * Copyright (C) 1997, 2000 David S. Miller (davem@redhat.com)
+ * Copyright (C) 1997, 2000, 2008 David S. Miller (davem@davemloft.net)
*/
#include <asm/asi.h>
@@ -15,6 +15,7 @@
#include <asm/thread_info.h>
#include <asm/cacheflush.h>
#include <asm/hypervisor.h>
+#include <asm/cpudata.h>
/* Basically, most of the Spitfire vs. Cheetah madness
* has to do with the fact that Cheetah does not support
@@ -514,6 +515,32 @@
b rtrap_xcall
ldx [%sp + PTREGS_OFF + PT_V9_TSTATE], %l1
+#ifdef CONFIG_MAGIC_SYSRQ
+ .globl xcall_fetch_glob_regs
+xcall_fetch_glob_regs:
+ sethi %hi(global_reg_snapshot), %g1
+ or %g1, %lo(global_reg_snapshot), %g1
+ __GET_CPUID(%g2)
+ sllx %g2, 6, %g3
+ add %g1, %g3, %g1
+ rdpr %tstate, %g7
+ stx %g7, [%g1 + GR_SNAP_TSTATE]
+ rdpr %tpc, %g7
+ stx %g7, [%g1 + GR_SNAP_TPC]
+ rdpr %tnpc, %g7
+ stx %g7, [%g1 + GR_SNAP_TNPC]
+ stx %o7, [%g1 + GR_SNAP_O7]
+ stx %i7, [%g1 + GR_SNAP_I7]
+ sethi %hi(trap_block), %g7
+ or %g7, %lo(trap_block), %g7
+ sllx %g2, TRAP_BLOCK_SZ_SHIFT, %g2
+ add %g7, %g2, %g7
+ ldx [%g7 + TRAP_PER_CPU_THREAD], %g3
+ membar #StoreStore
+ stx %g3, [%g1 + GR_SNAP_THREAD]
+ retry
+#endif /* CONFIG_MAGIC_SYSRQ */
+
#ifdef DCACHE_ALIASING_POSSIBLE
.align 32
.globl xcall_flush_dcache_page_cheetah
diff --git a/arch/sparc64/prom/Makefile b/arch/sparc64/prom/Makefile
index 3d33ed27..8c94483 100644
--- a/arch/sparc64/prom/Makefile
+++ b/arch/sparc64/prom/Makefile
@@ -1,4 +1,3 @@
-# $Id: Makefile,v 1.7 2000/12/14 22:57:25 davem Exp $
# Makefile for the Sun Boot PROM interface library under
# Linux.
#
diff --git a/arch/sparc64/prom/bootstr.c b/arch/sparc64/prom/bootstr.c
index a727861..ab9ccc6 100644
--- a/arch/sparc64/prom/bootstr.c
+++ b/arch/sparc64/prom/bootstr.c
@@ -1,4 +1,4 @@
-/* $Id: bootstr.c,v 1.6 1999/08/31 06:55:01 davem Exp $
+/*
* bootstr.c: Boot string/argument acquisition from the PROM.
*
* Copyright(C) 1995 David S. Miller (davem@caip.rutgers.edu)
diff --git a/arch/sparc64/prom/devops.c b/arch/sparc64/prom/devops.c
index 4641839..9dbd803 100644
--- a/arch/sparc64/prom/devops.c
+++ b/arch/sparc64/prom/devops.c
@@ -1,4 +1,4 @@
-/* $Id: devops.c,v 1.3 1997/10/29 07:43:28 ecd Exp $
+/*
* devops.c: Device operations using the PROM.
*
* Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
diff --git a/arch/sparc64/prom/init.c b/arch/sparc64/prom/init.c
index 87e7c7e..7b00f89 100644
--- a/arch/sparc64/prom/init.c
+++ b/arch/sparc64/prom/init.c
@@ -1,4 +1,4 @@
-/* $Id: init.c,v 1.10 1999/09/21 14:35:59 davem Exp $
+/*
* init.c: Initialize internal variables used by the PROM
* library functions.
*
diff --git a/arch/sparc64/prom/misc.c b/arch/sparc64/prom/misc.c
index 47a877a..9b0c076 100644
--- a/arch/sparc64/prom/misc.c
+++ b/arch/sparc64/prom/misc.c
@@ -1,4 +1,4 @@
-/* $Id: misc.c,v 1.20 2001/09/21 03:17:07 kanoj Exp $
+/*
* misc.c: Miscellaneous prom functions that don't belong
* anywhere else.
*
diff --git a/arch/sparc64/prom/p1275.c b/arch/sparc64/prom/p1275.c
index 7fcccc0..4b7c937 100644
--- a/arch/sparc64/prom/p1275.c
+++ b/arch/sparc64/prom/p1275.c
@@ -1,4 +1,4 @@
-/* $Id: p1275.c,v 1.22 2001/10/18 09:40:00 davem Exp $
+/*
* p1275.c: Sun IEEE 1275 PROM low level interface routines
*
* Copyright (C) 1996,1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
diff --git a/arch/sparc64/prom/tree.c b/arch/sparc64/prom/tree.c
index a99ccd7..281aea4 100644
--- a/arch/sparc64/prom/tree.c
+++ b/arch/sparc64/prom/tree.c
@@ -1,4 +1,4 @@
-/* $Id: tree.c,v 1.10 1998/01/10 22:39:00 ecd Exp $
+/*
* tree.c: Basic device tree traversal/scanning for the Linux
* prom library.
*
diff --git a/arch/um/Kconfig b/arch/um/Kconfig
index dba8e05..6976812 100644
--- a/arch/um/Kconfig
+++ b/arch/um/Kconfig
@@ -259,6 +259,8 @@
source "drivers/mtd/Kconfig"
endif
+source "drivers/leds/Kconfig"
+
#This is just to shut up some Kconfig warnings, so no prompt.
config INPUT
bool
diff --git a/arch/um/Kconfig.char b/arch/um/Kconfig.char
index 3a4b396..1b238eb 100644
--- a/arch/um/Kconfig.char
+++ b/arch/um/Kconfig.char
@@ -145,14 +145,14 @@
systems, it is safe to say N.
config RAW_DRIVER
- tristate "RAW driver (/dev/raw/rawN) (OBSOLETE)"
+ tristate "RAW driver (/dev/raw/rawN)"
+ depends on BLOCK
help
The raw driver permits block devices to be bound to /dev/raw/rawN.
Once bound, I/O against /dev/raw/rawN uses efficient zero-copy I/O.
See the raw(8) manpage for more details.
- The raw driver is deprecated and will be removed soon.
- Applications should simply open the device (eg /dev/hda1)
+ Applications should preferably open the device (eg /dev/hda1)
with the O_DIRECT flag.
config MAX_RAW_DEVS
diff --git a/arch/um/drivers/chan_user.c b/arch/um/drivers/chan_user.c
index 0257640..cfeb3f4 100644
--- a/arch/um/drivers/chan_user.c
+++ b/arch/um/drivers/chan_user.c
@@ -11,6 +11,7 @@
#include <termios.h>
#include <sys/ioctl.h>
#include "chan_user.h"
+#include "kern_constants.h"
#include "os.h"
#include "um_malloc.h"
#include "user.h"
diff --git a/arch/um/drivers/cow_sys.h b/arch/um/drivers/cow_sys.h
index ca8c9e1..f5701fd 100644
--- a/arch/um/drivers/cow_sys.h
+++ b/arch/um/drivers/cow_sys.h
@@ -8,7 +8,7 @@
static inline void *cow_malloc(int size)
{
- return kmalloc(size, UM_GFP_KERNEL);
+ return uml_kmalloc(size, UM_GFP_KERNEL);
}
static inline void cow_free(void *ptr)
diff --git a/arch/um/drivers/daemon_user.c b/arch/um/drivers/daemon_user.c
index f23c109..f8e85e0 100644
--- a/arch/um/drivers/daemon_user.c
+++ b/arch/um/drivers/daemon_user.c
@@ -34,7 +34,7 @@
{
struct sockaddr_un *sun;
- sun = kmalloc(sizeof(struct sockaddr_un), UM_GFP_KERNEL);
+ sun = uml_kmalloc(sizeof(struct sockaddr_un), UM_GFP_KERNEL);
if (sun == NULL) {
printk(UM_KERN_ERR "new_addr: allocation of sockaddr_un "
"failed\n");
@@ -83,7 +83,7 @@
goto out_close;
}
- sun = kmalloc(sizeof(struct sockaddr_un), UM_GFP_KERNEL);
+ sun = uml_kmalloc(sizeof(struct sockaddr_un), UM_GFP_KERNEL);
if (sun == NULL) {
printk(UM_KERN_ERR "new_addr: allocation of sockaddr_un "
"failed\n");
diff --git a/arch/um/drivers/fd.c b/arch/um/drivers/fd.c
index 0a2bb5b..f5a981a 100644
--- a/arch/um/drivers/fd.c
+++ b/arch/um/drivers/fd.c
@@ -40,7 +40,7 @@
return NULL;
}
- data = kmalloc(sizeof(*data), UM_GFP_KERNEL);
+ data = uml_kmalloc(sizeof(*data), UM_GFP_KERNEL);
if (data == NULL)
return NULL;
diff --git a/arch/um/drivers/hostaudio_kern.c b/arch/um/drivers/hostaudio_kern.c
index ff1b22b..368219c 100644
--- a/arch/um/drivers/hostaudio_kern.c
+++ b/arch/um/drivers/hostaudio_kern.c
@@ -154,7 +154,7 @@
case SNDCTL_DSP_SUBDIVIDE:
case SNDCTL_DSP_SETFRAGMENT:
if (get_user(data, (int __user *) arg))
- return EFAULT;
+ return -EFAULT;
break;
default:
break;
diff --git a/arch/um/drivers/mcast_user.c b/arch/um/drivers/mcast_user.c
index 5f647d7..ee19e91 100644
--- a/arch/um/drivers/mcast_user.c
+++ b/arch/um/drivers/mcast_user.c
@@ -15,6 +15,7 @@
#include <unistd.h>
#include <errno.h>
#include <netinet/in.h>
+#include "kern_constants.h"
#include "mcast.h"
#include "net_user.h"
#include "um_malloc.h"
@@ -24,7 +25,7 @@
{
struct sockaddr_in *sin;
- sin = kmalloc(sizeof(struct sockaddr_in), UM_GFP_KERNEL);
+ sin = uml_kmalloc(sizeof(struct sockaddr_in), UM_GFP_KERNEL);
if (sin == NULL) {
printk(UM_KERN_ERR "new_addr: allocation of sockaddr_in "
"failed\n");
diff --git a/arch/um/drivers/net_user.c b/arch/um/drivers/net_user.c
index abf2653..9415dd9 100644
--- a/arch/um/drivers/net_user.c
+++ b/arch/um/drivers/net_user.c
@@ -222,7 +222,7 @@
netmask[2], netmask[3]);
output_len = UM_KERN_PAGE_SIZE;
- output = kmalloc(output_len, UM_GFP_KERNEL);
+ output = uml_kmalloc(output_len, UM_GFP_KERNEL);
if (output == NULL)
printk(UM_KERN_ERR "change : failed to allocate output "
"buffer\n");
diff --git a/arch/um/drivers/pcap_user.c b/arch/um/drivers/pcap_user.c
index e980935..5f90358 100644
--- a/arch/um/drivers/pcap_user.c
+++ b/arch/um/drivers/pcap_user.c
@@ -50,7 +50,7 @@
return -EIO;
}
- pri->compiled = kmalloc(sizeof(struct bpf_program),
+ pri->compiled = uml_kmalloc(sizeof(struct bpf_program),
UM_GFP_KERNEL);
if (pri->compiled == NULL) {
printk(UM_KERN_ERR "pcap_open : kmalloc failed\n");
diff --git a/arch/um/drivers/port_user.c b/arch/um/drivers/port_user.c
index d269ca3..b49bf56 100644
--- a/arch/um/drivers/port_user.c
+++ b/arch/um/drivers/port_user.c
@@ -47,7 +47,7 @@
if (kern_data == NULL)
return NULL;
- data = kmalloc(sizeof(*data), UM_GFP_KERNEL);
+ data = uml_kmalloc(sizeof(*data), UM_GFP_KERNEL);
if (data == NULL)
goto err;
diff --git a/arch/um/drivers/pty.c b/arch/um/drivers/pty.c
index 49c79dd..1113911 100644
--- a/arch/um/drivers/pty.c
+++ b/arch/um/drivers/pty.c
@@ -29,7 +29,7 @@
{
struct pty_chan *data;
- data = kmalloc(sizeof(*data), UM_GFP_KERNEL);
+ data = uml_kmalloc(sizeof(*data), UM_GFP_KERNEL);
if (data == NULL)
return NULL;
diff --git a/arch/um/drivers/random.c b/arch/um/drivers/random.c
index 71f0959..4949044 100644
--- a/arch/um/drivers/random.c
+++ b/arch/um/drivers/random.c
@@ -1,4 +1,5 @@
-/* Copyright (C) 2005 Jeff Dike <jdike@addtoit.com> */
+/* Copyright (C) 2005 - 2008 Jeff Dike <jdike@{linux.intel,addtoit}.com> */
+
/* Much of this ripped from drivers/char/hw_random.c, see there for other
* copyright.
*
@@ -8,16 +9,18 @@
#include <linux/sched.h>
#include <linux/module.h>
#include <linux/fs.h>
+#include <linux/interrupt.h>
#include <linux/miscdevice.h>
#include <linux/delay.h>
#include <asm/uaccess.h>
+#include "irq_kern.h"
#include "os.h"
/*
* core module and version information
*/
#define RNG_VERSION "1.0.0"
-#define RNG_MODULE_NAME "random"
+#define RNG_MODULE_NAME "hw_random"
#define RNG_MISCDEV_MINOR 183 /* official */
@@ -26,47 +29,67 @@
* protects against a module being loaded twice at the same time.
*/
static int random_fd = -1;
+static DECLARE_WAIT_QUEUE_HEAD(host_read_wait);
static int rng_dev_open (struct inode *inode, struct file *filp)
{
/* enforce read-only access to this chrdev */
if ((filp->f_mode & FMODE_READ) == 0)
return -EINVAL;
- if (filp->f_mode & FMODE_WRITE)
+ if ((filp->f_mode & FMODE_WRITE) != 0)
return -EINVAL;
return 0;
}
+static atomic_t host_sleep_count = ATOMIC_INIT(0);
+
static ssize_t rng_dev_read (struct file *filp, char __user *buf, size_t size,
- loff_t * offp)
+ loff_t *offp)
{
- u32 data;
- int n, ret = 0, have_data;
+ u32 data;
+ int n, ret = 0, have_data;
- while(size){
- n = os_read_file(random_fd, &data, sizeof(data));
- if(n > 0){
- have_data = n;
- while (have_data && size) {
- if (put_user((u8)data, buf++)) {
- ret = ret ? : -EFAULT;
- break;
- }
- size--;
- ret++;
- have_data--;
- data>>=8;
- }
- }
- else if(n == -EAGAIN){
- if (filp->f_flags & O_NONBLOCK)
- return ret ? : -EAGAIN;
+ while (size) {
+ n = os_read_file(random_fd, &data, sizeof(data));
+ if (n > 0) {
+ have_data = n;
+ while (have_data && size) {
+ if (put_user((u8) data, buf++)) {
+ ret = ret ? : -EFAULT;
+ break;
+ }
+ size--;
+ ret++;
+ have_data--;
+ data >>= 8;
+ }
+ }
+ else if (n == -EAGAIN) {
+ DECLARE_WAITQUEUE(wait, current);
- if(need_resched())
- schedule_timeout_interruptible(1);
- }
- else return n;
+ if (filp->f_flags & O_NONBLOCK)
+ return ret ? : -EAGAIN;
+
+ atomic_inc(&host_sleep_count);
+ reactivate_fd(random_fd, RANDOM_IRQ);
+ add_sigio_fd(random_fd);
+
+ add_wait_queue(&host_read_wait, &wait);
+ set_task_state(current, TASK_INTERRUPTIBLE);
+
+ schedule();
+ set_task_state(current, TASK_RUNNING);
+ remove_wait_queue(&host_read_wait, &wait);
+
+ if (atomic_dec_and_test(&host_sleep_count)) {
+ ignore_sigio_fd(random_fd);
+ deactivate_fd(random_fd, RANDOM_IRQ);
+ }
+ }
+ else
+ return n;
+
if (signal_pending (current))
return ret ? : -ERESTARTSYS;
}
@@ -86,6 +109,13 @@
&rng_chrdev_ops,
};
+static irqreturn_t random_interrupt(int irq, void *data)
+{
+ wake_up(&host_read_wait);
+
+ return IRQ_HANDLED;
+}
+
/*
* rng_init - initialize RNG module
*/
@@ -93,28 +123,33 @@
{
int err;
- err = os_open_file("/dev/random", of_read(OPENFLAGS()), 0);
- if(err < 0)
- goto out;
+ err = os_open_file("/dev/random", of_read(OPENFLAGS()), 0);
+ if (err < 0)
+ goto out;
- random_fd = err;
+ random_fd = err;
- err = os_set_fd_block(random_fd, 0);
- if(err)
+ err = um_request_irq(RANDOM_IRQ, random_fd, IRQ_READ, random_interrupt,
+ IRQF_DISABLED | IRQF_SAMPLE_RANDOM, "random",
+ NULL);
+ if (err)
goto err_out_cleanup_hw;
+ sigio_broken(random_fd, 1);
+
err = misc_register (&rng_miscdev);
if (err) {
- printk (KERN_ERR RNG_MODULE_NAME ": misc device register failed\n");
+ printk (KERN_ERR RNG_MODULE_NAME ": misc device register "
+ "failed\n");
goto err_out_cleanup_hw;
}
+out:
+ return err;
- out:
- return err;
-
- err_out_cleanup_hw:
- random_fd = -1;
- goto out;
+err_out_cleanup_hw:
+ os_close_file(random_fd);
+ random_fd = -1;
+ goto out;
}
/*
@@ -122,6 +157,7 @@
*/
static void __exit rng_cleanup (void)
{
+ os_close_file(random_fd);
misc_deregister (&rng_miscdev);
}
diff --git a/arch/um/drivers/slip_user.c b/arch/um/drivers/slip_user.c
index 8b80505..a1c2d2c 100644
--- a/arch/um/drivers/slip_user.c
+++ b/arch/um/drivers/slip_user.c
@@ -96,7 +96,7 @@
pid = err;
output_len = UM_KERN_PAGE_SIZE;
- output = kmalloc(output_len, UM_GFP_KERNEL);
+ output = uml_kmalloc(output_len, UM_GFP_KERNEL);
if (output == NULL) {
printk(UM_KERN_ERR "slip_tramp : failed to allocate output "
"buffer\n");
diff --git a/arch/um/drivers/tty.c b/arch/um/drivers/tty.c
index c930fed..495858a 100644
--- a/arch/um/drivers/tty.c
+++ b/arch/um/drivers/tty.c
@@ -29,7 +29,7 @@
}
str++;
- data = kmalloc(sizeof(*data), UM_GFP_KERNEL);
+ data = uml_kmalloc(sizeof(*data), UM_GFP_KERNEL);
if (data == NULL)
return NULL;
*data = ((struct tty_chan) { .dev = str,
diff --git a/arch/um/drivers/ubd_kern.c b/arch/um/drivers/ubd_kern.c
index 5e45e39..b58fb89 100644
--- a/arch/um/drivers/ubd_kern.c
+++ b/arch/um/drivers/ubd_kern.c
@@ -49,7 +49,6 @@
#include "irq_user.h"
#include "irq_kern.h"
#include "ubd_user.h"
-#include "kern_util.h"
#include "os.h"
#include "mem.h"
#include "mem_kern.h"
@@ -1178,8 +1177,8 @@
* by one word. Thanks to Lynn Kerby for the fix and James McMechan
* for the original diagnosis.
*/
- if(*cow_offset == ((bitmap_len + sizeof(unsigned long) - 1) /
- sizeof(unsigned long) - 1))
+ if (*cow_offset == (DIV_ROUND_UP(bitmap_len,
+ sizeof(unsigned long)) - 1))
(*cow_offset)--;
bitmap_words[0] = bitmap[*cow_offset];
diff --git a/arch/um/drivers/xterm.c b/arch/um/drivers/xterm.c
index 8a1c18a..da2caa5 100644
--- a/arch/um/drivers/xterm.c
+++ b/arch/um/drivers/xterm.c
@@ -30,7 +30,7 @@
{
struct xterm_chan *data;
- data = kmalloc(sizeof(*data), UM_GFP_KERNEL);
+ data = uml_kmalloc(sizeof(*data), UM_GFP_KERNEL);
if (data == NULL)
return NULL;
*data = ((struct xterm_chan) { .pid = -1,
diff --git a/arch/um/include/as-layout.h b/arch/um/include/as-layout.h
index cac542d..58e852d 100644
--- a/arch/um/include/as-layout.h
+++ b/arch/um/include/as-layout.h
@@ -23,16 +23,16 @@
*/
#ifdef __ASSEMBLY__
-#define _AC(X, Y) (Y)
+#define _UML_AC(X, Y) (Y)
#else
-#define __AC(X, Y) (X (Y))
-#define _AC(X, Y) __AC(X, Y)
+#define __UML_AC(X, Y) (X(Y))
+#define _UML_AC(X, Y) __UML_AC(X, Y)
#endif
-#define STUB_START _AC(, 0x100000)
-#define STUB_CODE _AC((unsigned long), STUB_START)
-#define STUB_DATA _AC((unsigned long), STUB_CODE + UM_KERN_PAGE_SIZE)
-#define STUB_END _AC((unsigned long), STUB_DATA + UM_KERN_PAGE_SIZE)
+#define STUB_START _UML_AC(, 0x100000)
+#define STUB_CODE _UML_AC((unsigned long), STUB_START)
+#define STUB_DATA _UML_AC((unsigned long), STUB_CODE + UM_KERN_PAGE_SIZE)
+#define STUB_END _UML_AC((unsigned long), STUB_DATA + UM_KERN_PAGE_SIZE)
#ifndef __ASSEMBLY__
diff --git a/arch/um/include/line.h b/arch/um/include/line.h
index 979b73e..311a0d3 100644
--- a/arch/um/include/line.h
+++ b/arch/um/include/line.h
@@ -58,11 +58,11 @@
};
#define LINE_INIT(str, d) \
- { .count_lock = SPIN_LOCK_UNLOCKED, \
+ { .count_lock = __SPIN_LOCK_UNLOCKED((str).count_lock), \
.init_str = str, \
.init_pri = INIT_STATIC, \
.valid = 1, \
- .lock = SPIN_LOCK_UNLOCKED, \
+ .lock = __SPIN_LOCK_UNLOCKED((str).lock), \
.driver = d }
extern void line_close(struct tty_struct *tty, struct file * filp);
diff --git a/arch/um/include/os.h b/arch/um/include/os.h
index 32c799e..db5be46 100644
--- a/arch/um/include/os.h
+++ b/arch/um/include/os.h
@@ -290,6 +290,7 @@
extern int add_sigio_fd(int fd);
extern int ignore_sigio_fd(int fd);
extern void maybe_sigio_broken(int fd, int read);
+extern void sigio_broken(int fd, int read);
/* sys-x86_64/prctl.c */
extern int os_arch_prctl(int pid, int code, unsigned long *addr);
@@ -298,6 +299,6 @@
extern int get_pty(void);
/* sys-$ARCH/task_size.c */
-extern unsigned long os_get_task_size(void);
+extern unsigned long os_get_top_address(void);
#endif
diff --git a/arch/um/include/process.h b/arch/um/include/process.h
index 5af9157..bb873a5 100644
--- a/arch/um/include/process.h
+++ b/arch/um/include/process.h
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2000, 2001, 2002 Jeff Dike (jdike@karaya.com)
+ * Copyright (C) 2000 - 2008 Jeff Dike (jdike@{addtoit,linux.intel}.com)
* Licensed under the GPL
*/
@@ -8,18 +8,10 @@
#include <signal.h>
-extern void sig_handler(int sig, struct sigcontext sc);
-extern void alarm_handler(int sig, struct sigcontext sc);
+/* Copied from linux/compiler-gcc.h since we can't include it directly */
+#define barrier() __asm__ __volatile__("": : :"memory")
+
+extern void sig_handler(int sig, struct sigcontext *sc);
+extern void alarm_handler(int sig, struct sigcontext *sc);
#endif
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff --git a/arch/um/include/skas_ptrace.h b/arch/um/include/skas_ptrace.h
index cd2327d..3d31bba 100644
--- a/arch/um/include/skas_ptrace.h
+++ b/arch/um/include/skas_ptrace.h
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2000, 2001, 2002 Jeff Dike (jdike@karaya.com)
+ * Copyright (C) 2000 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
* Licensed under the GPL
*/
@@ -12,14 +12,3 @@
#include "sysdep/skas_ptrace.h"
#endif
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff --git a/arch/um/include/sysdep-i386/ptrace_user.h b/arch/um/include/sysdep-i386/ptrace_user.h
index 7565072..ef56247 100644
--- a/arch/um/include/sysdep-i386/ptrace_user.h
+++ b/arch/um/include/sysdep-i386/ptrace_user.h
@@ -41,38 +41,10 @@
#define PT_SP_OFFSET PT_OFFSET(UESP)
#define PT_SP(regs) ((regs)[UESP])
-#define FP_SIZE ((HOST_XFP_SIZE > HOST_FP_SIZE) ? HOST_XFP_SIZE : HOST_FP_SIZE)
+#define FP_SIZE ((HOST_FPX_SIZE > HOST_FP_SIZE) ? HOST_FPX_SIZE : HOST_FP_SIZE)
#ifndef FRAME_SIZE
#define FRAME_SIZE (17)
#endif
-#define FRAME_SIZE_OFFSET (FRAME_SIZE * sizeof(unsigned long))
-
-#define FP_FRAME_SIZE (27)
-#define FPX_FRAME_SIZE (128)
-
-#ifdef PTRACE_GETREGS
-#define UM_HAVE_GETREGS
-#endif
-
-#ifdef PTRACE_SETREGS
-#define UM_HAVE_SETREGS
-#endif
-
-#ifdef PTRACE_GETFPREGS
-#define UM_HAVE_GETFPREGS
-#endif
-
-#ifdef PTRACE_SETFPREGS
-#define UM_HAVE_SETFPREGS
-#endif
-
-#ifdef PTRACE_GETFPXREGS
-#define UM_HAVE_GETFPXREGS
-#endif
-
-#ifdef PTRACE_SETFPXREGS
-#define UM_HAVE_SETFPXREGS
-#endif
#endif
diff --git a/arch/um/include/sysdep-i386/sigcontext.h b/arch/um/include/sysdep-i386/sigcontext.h
index 67e7712..f583c87 100644
--- a/arch/um/include/sysdep-i386/sigcontext.h
+++ b/arch/um/include/sysdep-i386/sigcontext.h
@@ -10,7 +10,7 @@
#define IP_RESTART_SYSCALL(ip) ((ip) -= 2)
-#define GET_FAULTINFO_FROM_SC(fi,sc) \
+#define GET_FAULTINFO_FROM_SC(fi, sc) \
{ \
(fi).cr2 = SC_CR2(sc); \
(fi).error_code = SC_ERR(sc); \
diff --git a/arch/um/include/sysdep-x86_64/ptrace_user.h b/arch/um/include/sysdep-x86_64/ptrace_user.h
index 45c0bd8..4dbccdb 100644
--- a/arch/um/include/sysdep-x86_64/ptrace_user.h
+++ b/arch/um/include/sysdep-x86_64/ptrace_user.h
@@ -48,7 +48,8 @@
#define PT_ORIG_RAX_OFFSET (ORIG_RAX)
#define PT_ORIG_RAX(regs) ((regs)[PT_INDEX(ORIG_RAX)])
-/* x86_64 FC3 doesn't define this in /usr/include/linux/ptrace.h even though
+/*
+ * x86_64 FC3 doesn't define this in /usr/include/linux/ptrace.h even though
* it's defined in the kernel's include/linux/ptrace.h. Additionally, use the
* 2.4 name and value for 2.4 host compatibility.
*/
@@ -56,7 +57,8 @@
#define PTRACE_OLDSETOPTIONS 21
#endif
-/* These are before the system call, so the system call number is RAX
+/*
+ * These are before the system call, so the system call number is RAX
* rather than ORIG_RAX, and arg4 is R10 rather than RCX
*/
#define REGS_SYSCALL_NR PT_INDEX(RAX)
@@ -73,14 +75,3 @@
#define FP_SIZE (HOST_FP_SIZE)
#endif
-
-/*
- * Overrides for Emacs so that we follow Linus's tabbing style.
- * Emacs will notice this stuff at the end of the file and automatically
- * adjust the settings for this buffer only. This must remain at the end
- * of the file.
- * ---------------------------------------------------------------------------
- * Local variables:
- * c-file-style: "linux"
- * End:
- */
diff --git a/arch/um/include/um_malloc.h b/arch/um/include/um_malloc.h
index 0ad17cb..c554d70 100644
--- a/arch/um/include/um_malloc.h
+++ b/arch/um/include/um_malloc.h
@@ -8,15 +8,12 @@
#include "kern_constants.h"
-extern void *__kmalloc(int size, int flags);
-static inline void *kmalloc(int size, int flags)
-{
- return __kmalloc(size, flags);
-}
-
+extern void *uml_kmalloc(int size, int flags);
extern void kfree(const void *ptr);
extern void *vmalloc(unsigned long size);
extern void vfree(void *ptr);
#endif /* __UM_MALLOC_H__ */
+
+
diff --git a/arch/um/kernel/dyn.lds.S b/arch/um/kernel/dyn.lds.S
index 26090b7..9975e1a 100644
--- a/arch/um/kernel/dyn.lds.S
+++ b/arch/um/kernel/dyn.lds.S
@@ -1,4 +1,5 @@
#include <asm-generic/vmlinux.lds.h>
+#include <asm/page.h>
OUTPUT_FORMAT(ELF_FORMAT)
OUTPUT_ARCH(ELF_ARCH)
@@ -21,7 +22,7 @@
_einittext = .;
}
- . = ALIGN(4096);
+ . = ALIGN(PAGE_SIZE);
/* Read-only sections, merged into text segment: */
.hash : { *(.hash) }
@@ -68,9 +69,9 @@
/* .gnu.warning sections are handled specially by elf32.em. */
*(.gnu.warning)
- . = ALIGN(4096);
+ . = ALIGN(PAGE_SIZE);
} =0x90909090
- . = ALIGN(4096);
+ . = ALIGN(PAGE_SIZE);
.syscall_stub : {
__syscall_stub_start = .;
*(.__syscall_stub*)
diff --git a/arch/um/kernel/init_task.c b/arch/um/kernel/init_task.c
index dcfceca..910eda8 100644
--- a/arch/um/kernel/init_task.c
+++ b/arch/um/kernel/init_task.c
@@ -12,7 +12,6 @@
static struct fs_struct init_fs = INIT_FS;
struct mm_struct init_mm = INIT_MM(init_mm);
-static struct files_struct init_files = INIT_FILES;
static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
EXPORT_SYMBOL(init_mm);
diff --git a/arch/um/kernel/ksyms.c b/arch/um/kernel/ksyms.c
index 66e2a30..ccc02a6 100644
--- a/arch/um/kernel/ksyms.c
+++ b/arch/um/kernel/ksyms.c
@@ -60,6 +60,11 @@
EXPORT_SYMBOL(run_helper);
EXPORT_SYMBOL(start_thread);
+EXPORT_SYMBOL(add_sigio_fd);
+EXPORT_SYMBOL(ignore_sigio_fd);
+EXPORT_SYMBOL(deactivate_fd);
+EXPORT_SYMBOL(sigio_broken);
+
#ifdef CONFIG_SMP
/* required for SMP */
diff --git a/arch/um/kernel/mem.c b/arch/um/kernel/mem.c
index 2eea1ff..b0ee646 100644
--- a/arch/um/kernel/mem.c
+++ b/arch/um/kernel/mem.c
@@ -375,3 +375,8 @@
return pmd;
}
#endif
+
+void *uml_kmalloc(int size, int flags)
+{
+ return kmalloc(size, flags);
+}
diff --git a/arch/um/kernel/time.c b/arch/um/kernel/time.c
index 0d0cea2..c3e2f36 100644
--- a/arch/um/kernel/time.c
+++ b/arch/um/kernel/time.c
@@ -75,7 +75,7 @@
static cycle_t itimer_read(void)
{
- return os_nsecs();
+ return os_nsecs() / 1000;
}
static struct clocksource itimer_clocksource = {
@@ -83,7 +83,7 @@
.rating = 300,
.read = itimer_read,
.mask = CLOCKSOURCE_MASK(64),
- .mult = 1,
+ .mult = 1000,
.shift = 0,
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
diff --git a/arch/um/kernel/um_arch.c b/arch/um/kernel/um_arch.c
index 56deed6..8d84250 100644
--- a/arch/um/kernel/um_arch.c
+++ b/arch/um/kernel/um_arch.c
@@ -150,7 +150,7 @@
static int __init no_skas_debug_setup(char *line, int *add)
{
printf("'debug' is not necessary to gdb UML in skas mode - run \n");
- printf("'gdb linux'");
+ printf("'gdb linux'\n");
return 0;
}
@@ -258,6 +258,7 @@
{
unsigned long avail, diff;
unsigned long virtmem_size, max_physmem;
+ unsigned long stack;
unsigned int i;
int add;
char * mode;
@@ -273,7 +274,7 @@
if (have_root == 0)
add_arg(DEFAULT_COMMAND_LINE);
- host_task_size = os_get_task_size();
+ host_task_size = os_get_top_address();
/*
* TASK_SIZE needs to be PGDIR_SIZE aligned or else exit_mmap craps
* out
@@ -348,7 +349,9 @@
}
virtmem_size = physmem_size;
- avail = TASK_SIZE - start_vm;
+ stack = (unsigned long) argv;
+ stack &= ~(1024 * 1024 - 1);
+ avail = stack - start_vm;
if (physmem_size > avail)
virtmem_size = avail;
end_vm = start_vm + virtmem_size;
diff --git a/arch/um/kernel/uml.lds.S b/arch/um/kernel/uml.lds.S
index 5828c1d..11b8352 100644
--- a/arch/um/kernel/uml.lds.S
+++ b/arch/um/kernel/uml.lds.S
@@ -1,4 +1,5 @@
#include <asm-generic/vmlinux.lds.h>
+#include <asm/page.h>
OUTPUT_FORMAT(ELF_FORMAT)
OUTPUT_ARCH(ELF_ARCH)
@@ -26,7 +27,7 @@
INIT_TEXT
_einittext = .;
}
- . = ALIGN(4096);
+ . = ALIGN(PAGE_SIZE);
.text :
{
@@ -39,7 +40,7 @@
*(.gnu.linkonce.t*)
}
- . = ALIGN(4096);
+ . = ALIGN(PAGE_SIZE);
.syscall_stub : {
__syscall_stub_start = .;
*(.__syscall_stub*)
@@ -79,7 +80,7 @@
.sdata : { *(.sdata) }
_edata = .;
PROVIDE (edata = .);
- . = ALIGN(0x1000);
+ . = ALIGN(PAGE_SIZE);
.sbss :
{
__bss_start = .;
diff --git a/arch/um/os-Linux/drivers/ethertap_user.c b/arch/um/os-Linux/drivers/ethertap_user.c
index 6fb0b17..cc72cb2 100644
--- a/arch/um/os-Linux/drivers/ethertap_user.c
+++ b/arch/um/os-Linux/drivers/ethertap_user.c
@@ -52,7 +52,7 @@
return;
}
- output = kmalloc(UM_KERN_PAGE_SIZE, UM_GFP_KERNEL);
+ output = uml_kmalloc(UM_KERN_PAGE_SIZE, UM_GFP_KERNEL);
if (output == NULL)
printk(UM_KERN_ERR "etap_change : Failed to allocate output "
"buffer\n");
@@ -165,7 +165,7 @@
err = etap_tramp(pri->dev_name, pri->gate_addr, control_fds[0],
control_fds[1], data_fds[0], data_fds[1]);
output_len = UM_KERN_PAGE_SIZE;
- output = kmalloc(output_len, UM_GFP_KERNEL);
+ output = uml_kmalloc(output_len, UM_GFP_KERNEL);
read_output(control_fds[0], output, output_len);
if (output == NULL)
diff --git a/arch/um/os-Linux/helper.c b/arch/um/os-Linux/helper.c
index f25c29a..30860b8 100644
--- a/arch/um/os-Linux/helper.c
+++ b/arch/um/os-Linux/helper.c
@@ -7,6 +7,7 @@
#include <unistd.h>
#include <errno.h>
#include <sched.h>
+#include <linux/limits.h>
#include <sys/socket.h>
#include <sys/wait.h>
#include "kern_constants.h"
@@ -71,8 +72,8 @@
data.pre_data = pre_data;
data.argv = argv;
data.fd = fds[1];
- data.buf = __cant_sleep() ? kmalloc(PATH_MAX, UM_GFP_ATOMIC) :
- kmalloc(PATH_MAX, UM_GFP_KERNEL);
+ data.buf = __cant_sleep() ? uml_kmalloc(PATH_MAX, UM_GFP_ATOMIC) :
+ uml_kmalloc(PATH_MAX, UM_GFP_KERNEL);
pid = clone(helper_child, (void *) sp, CLONE_VM, &data);
if (pid < 0) {
ret = -errno;
diff --git a/arch/um/os-Linux/main.c b/arch/um/os-Linux/main.c
index abb9b0f..eee69b9 100644
--- a/arch/um/os-Linux/main.c
+++ b/arch/um/os-Linux/main.c
@@ -199,7 +199,7 @@
return __real_malloc(size);
else if (size <= UM_KERN_PAGE_SIZE)
/* finding contiguous pages can be hard*/
- ret = kmalloc(size, UM_GFP_KERNEL);
+ ret = uml_kmalloc(size, UM_GFP_KERNEL);
else ret = vmalloc(size);
/*
diff --git a/arch/um/os-Linux/sigio.c b/arch/um/os-Linux/sigio.c
index abf47a7c..eb8f2e4 100644
--- a/arch/um/os-Linux/sigio.c
+++ b/arch/um/os-Linux/sigio.c
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2002 - 2007 Jeff Dike (jdike@{addtoit,linux.intel}.com)
+ * Copyright (C) 2002 - 2008 Jeff Dike (jdike@{addtoit,linux.intel}.com)
* Licensed under the GPL
*/
@@ -15,6 +15,7 @@
#include "kern_util.h"
#include "init.h"
#include "os.h"
+#include "process.h"
#include "sigio.h"
#include "um_malloc.h"
#include "user.h"
@@ -109,7 +110,7 @@
if (n <= polls->size)
return 0;
- new = kmalloc(n * sizeof(struct pollfd), UM_GFP_ATOMIC);
+ new = uml_kmalloc(n * sizeof(struct pollfd), UM_GFP_ATOMIC);
if (new == NULL) {
printk(UM_KERN_ERR "need_poll : failed to allocate new "
"pollfds\n");
@@ -243,7 +244,7 @@
{
struct pollfd *p;
- p = kmalloc(sizeof(struct pollfd), UM_GFP_KERNEL);
+ p = uml_kmalloc(sizeof(struct pollfd), UM_GFP_KERNEL);
if (p == NULL) {
printk(UM_KERN_ERR "setup_initial_poll : failed to allocate "
"poll\n");
@@ -338,20 +339,10 @@
close(l_write_sigio_fds[1]);
}
-/* Changed during early boot */
-static int pty_output_sigio = 0;
-static int pty_close_sigio = 0;
-
-void maybe_sigio_broken(int fd, int read)
+void sigio_broken(int fd, int read)
{
int err;
- if (!isatty(fd))
- return;
-
- if ((read || pty_output_sigio) && (!read || pty_close_sigio))
- return;
-
write_sigio_workaround();
sigio_lock();
@@ -370,6 +361,21 @@
sigio_unlock();
}
+/* Changed during early boot */
+static int pty_output_sigio;
+static int pty_close_sigio;
+
+void maybe_sigio_broken(int fd, int read)
+{
+ if (!isatty(fd))
+ return;
+
+ if ((read || pty_output_sigio) && (!read || pty_close_sigio))
+ return;
+
+ sigio_broken(fd, read);
+}
+
static void sigio_cleanup(void)
{
if (write_sigio_pid == -1)
@@ -383,7 +389,7 @@
__uml_exitcall(sigio_cleanup);
/* Used as a flag during SIGIO testing early in boot */
-static volatile int got_sigio = 0;
+static int got_sigio;
static void __init handler(int sig)
{
@@ -498,7 +504,8 @@
if (errno != EAGAIN)
printk(UM_KERN_ERR "tty_output : write failed, errno = %d\n",
errno);
- while (((n = read(slave, buf, sizeof(buf))) > 0) && !got_sigio)
+ while (((n = read(slave, buf, sizeof(buf))) > 0) &&
+ !({ barrier(); got_sigio; }))
;
if (got_sigio) {
diff --git a/arch/um/os-Linux/signal.c b/arch/um/os-Linux/signal.c
index 3f1694b..5aade60 100644
--- a/arch/um/os-Linux/signal.c
+++ b/arch/um/os-Linux/signal.c
@@ -12,6 +12,7 @@
#include "as-layout.h"
#include "kern_util.h"
#include "os.h"
+#include "process.h"
#include "sysdep/barrier.h"
#include "sysdep/sigcontext.h"
#include "user.h"
diff --git a/arch/um/os-Linux/skas/process.c b/arch/um/os-Linux/skas/process.c
index 1e8cba6..172ad8f 100644
--- a/arch/um/os-Linux/skas/process.c
+++ b/arch/um/os-Linux/skas/process.c
@@ -55,7 +55,7 @@
* Signals that are OK to receive in the stub - we'll just continue it.
* SIGWINCH will happen when UML is inside a detached screen.
*/
-#define STUB_SIG_MASK (1 << SIGVTALRM)
+#define STUB_SIG_MASK ((1 << SIGVTALRM) | (1 << SIGWINCH))
/* Signals that the stub will finish with - anything else is an error */
#define STUB_DONE_MASK (1 << SIGTRAP)
@@ -442,7 +442,7 @@
unblock_signals();
break;
default:
- printk(UM_KERN_ERR "userspace - child stopped "
+ printk(UM_KERN_ERR "userspace - child stopped "
"with signal %d\n", sig);
fatal_sigsegv();
}
diff --git a/arch/um/os-Linux/start_up.c b/arch/um/os-Linux/start_up.c
index 997d019..183db26 100644
--- a/arch/um/os-Linux/start_up.c
+++ b/arch/um/os-Linux/start_up.c
@@ -23,6 +23,7 @@
#include "mem_user.h"
#include "ptrace_user.h"
#include "registers.h"
+#include "skas.h"
#include "skas_ptrace.h"
static void ptrace_child(void)
@@ -120,8 +121,10 @@
{
int status, n, ret = 0;
- if (ptrace(PTRACE_CONT, pid, 0, 0) < 0)
- fatal_perror("stop_ptraced_child : ptrace failed");
+ if (ptrace(PTRACE_CONT, pid, 0, 0) < 0) {
+ perror("stop_ptraced_child : ptrace failed");
+ return -1;
+ }
CATCH_EINTR(n = waitpid(pid, &status, 0));
if (!WIFEXITED(status) || (WEXITSTATUS(status) != exitcode)) {
int exit_with = WEXITSTATUS(status);
@@ -140,14 +143,27 @@
}
/* Changed only during early boot */
-int ptrace_faultinfo = 1;
-int ptrace_ldt = 1;
-int proc_mm = 1;
-int skas_needs_stub = 0;
+int ptrace_faultinfo;
+static int disable_ptrace_faultinfo;
+
+int ptrace_ldt;
+static int disable_ptrace_ldt;
+
+int proc_mm;
+static int disable_proc_mm;
+
+int have_switch_mm;
+static int disable_switch_mm;
+
+int skas_needs_stub;
static int __init skas0_cmd_param(char *str, int* add)
{
- ptrace_faultinfo = proc_mm = 0;
+ disable_ptrace_faultinfo = 1;
+ disable_ptrace_ldt = 1;
+ disable_proc_mm = 1;
+ disable_switch_mm = 1;
+
return 0;
}
@@ -157,15 +173,12 @@
__attribute__((alias("skas0_cmd_param")));
__uml_setup("skas0", skas0_cmd_param,
- "skas0\n"
- " Disables SKAS3 usage, so that SKAS0 is used, unless \n"
- " you specify mode=tt.\n\n");
+"skas0\n"
+" Disables SKAS3 and SKAS4 usage, so that SKAS0 is used\n\n");
__uml_setup("mode=skas0", mode_skas0_cmd_param,
- "mode=skas0\n"
- " Disables SKAS3 usage, so that SKAS0 is used, unless you \n"
- " specify mode=tt. Note that this was recently added - on \n"
- " older kernels you must use simply \"skas0\".\n\n");
+"mode=skas0\n"
+" Disables SKAS3 and SKAS4 usage, so that SKAS0 is used.\n\n");
/* Changed only during early boot */
static int force_sysemu_disabled = 0;
@@ -201,7 +214,7 @@
if (n < 0)
fatal_perror("check_sysemu : wait failed");
if (!WIFSTOPPED(status) || (WSTOPSIG(status) != SIGTRAP))
- fatal("check_sysemu : expected SIGTRAP, got status = %d",
+ fatal("check_sysemu : expected SIGTRAP, got status = %d\n",
status);
if (ptrace(PTRACE_GETREGS, pid, 0, regs) < 0)
@@ -243,9 +256,11 @@
if (WIFSTOPPED(status) &&
(WSTOPSIG(status) == (SIGTRAP|0x80))) {
- if (!count)
- fatal("check_ptrace : SYSEMU_SINGLESTEP "
- "doesn't singlestep");
+ if (!count) {
+ non_fatal("check_ptrace : SYSEMU_SINGLESTEP "
+ "doesn't singlestep");
+ goto fail;
+ }
n = ptrace(PTRACE_POKEUSR, pid, PT_SYSCALL_RET_OFFSET,
os_getpid());
if (n < 0)
@@ -255,9 +270,12 @@
}
else if (WIFSTOPPED(status) && (WSTOPSIG(status) == SIGTRAP))
count++;
- else
- fatal("check_ptrace : expected SIGTRAP or "
- "(SIGTRAP | 0x80), got status = %d", status);
+ else {
+ non_fatal("check_ptrace : expected SIGTRAP or "
+ "(SIGTRAP | 0x80), got status = %d\n",
+ status);
+ goto fail;
+ }
}
if (stop_ptraced_child(pid, 0, 0) < 0)
goto fail_stopped;
@@ -360,7 +378,7 @@
static int __init noprocmm_cmd_param(char *str, int* add)
{
- proc_mm = 0;
+ disable_proc_mm = 1;
return 0;
}
@@ -372,7 +390,7 @@
static int __init noptracefaultinfo_cmd_param(char *str, int* add)
{
- ptrace_faultinfo = 0;
+ disable_ptrace_faultinfo = 1;
return 0;
}
@@ -384,7 +402,7 @@
static int __init noptraceldt_cmd_param(char *str, int* add)
{
- ptrace_ldt = 0;
+ disable_ptrace_ldt = 1;
return 0;
}
@@ -404,17 +422,15 @@
n = ptrace(PTRACE_FAULTINFO, pid, 0, &fi);
if (n < 0) {
- ptrace_faultinfo = 0;
if (errno == EIO)
non_fatal("not found\n");
else
perror("not found");
- }
+ } else if (disable_ptrace_faultinfo)
+ non_fatal("found but disabled on command line\n");
else {
- if (!ptrace_faultinfo)
- non_fatal("found but disabled on command line\n");
- else
- non_fatal("found\n");
+ ptrace_faultinfo = 1;
+ non_fatal("found\n");
}
stop_ptraced_child(pid, 1, 1);
@@ -437,38 +453,30 @@
if (n < 0) {
if (errno == EIO)
non_fatal("not found\n");
- else {
- perror("not found");
- }
- ptrace_ldt = 0;
- }
- else {
- if (ptrace_ldt)
- non_fatal("found\n");
else
- non_fatal("found, but use is disabled\n");
+ perror("not found");
+ } else if (disable_ptrace_ldt)
+ non_fatal("found, but use is disabled\n");
+ else {
+ ptrace_ldt = 1;
+ non_fatal("found\n");
}
stop_ptraced_child(pid, 1, 1);
-#else
- /* PTRACE_LDT might be disabled via cmdline option.
- * We want to override this, else we might use the stub
- * without real need
- */
- ptrace_ldt = 1;
#endif
}
static inline void check_skas3_proc_mm(void)
{
non_fatal(" - /proc/mm...");
- if (access("/proc/mm", W_OK) < 0) {
- proc_mm = 0;
+ if (access("/proc/mm", W_OK) < 0)
perror("not found");
- }
- else if (!proc_mm)
+ else if (disable_proc_mm)
non_fatal("found but disabled on command line\n");
- else non_fatal("found\n");
+ else {
+ proc_mm = 1;
+ non_fatal("found\n");
+ }
}
void can_do_skas(void)
diff --git a/arch/um/os-Linux/sys-i386/registers.c b/arch/um/os-Linux/sys-i386/registers.c
index b613473..229f7a5 100644
--- a/arch/um/os-Linux/sys-i386/registers.c
+++ b/arch/um/os-Linux/sys-i386/registers.c
@@ -5,6 +5,8 @@
*/
#include <errno.h>
+#include <sys/ptrace.h>
+#include <sys/user.h>
#include "kern_constants.h"
#include "longjmp.h"
#include "user.h"
@@ -74,10 +76,10 @@
void arch_init_registers(int pid)
{
- unsigned long fpx_regs[HOST_XFP_SIZE];
+ struct user_fpxregs_struct fpx_regs;
int err;
- err = ptrace(PTRACE_GETFPXREGS, pid, 0, fpx_regs);
+ err = ptrace(PTRACE_GETFPXREGS, pid, 0, &fpx_regs);
if (!err)
return;
diff --git a/arch/um/os-Linux/sys-i386/task_size.c b/arch/um/os-Linux/sys-i386/task_size.c
index ccb49b0..be04c1e 100644
--- a/arch/um/os-Linux/sys-i386/task_size.c
+++ b/arch/um/os-Linux/sys-i386/task_size.c
@@ -63,7 +63,7 @@
return ok;
}
-unsigned long os_get_task_size(void)
+unsigned long os_get_top_address(void)
{
struct sigaction sa, old;
unsigned long bottom = 0;
@@ -76,9 +76,9 @@
* hosts, but shouldn't hurt otherwise.
*/
unsigned long top = 0xffffd000 >> UM_KERN_PAGE_SHIFT;
- unsigned long test;
+ unsigned long test, original;
- printf("Locating the top of the address space ... ");
+ printf("Locating the bottom of the address space ... ");
fflush(stdout);
/*
@@ -89,16 +89,31 @@
sigemptyset(&sa.sa_mask);
sa.sa_flags = SA_NODEFER;
if (sigaction(SIGSEGV, &sa, &old)) {
- perror("os_get_task_size");
+ perror("os_get_top_address");
exit(1);
}
- if (!page_ok(bottom)) {
- fprintf(stderr, "Address 0x%x no good?\n",
- bottom << UM_KERN_PAGE_SHIFT);
+ /* Manually scan the address space, bottom-up, until we find
+ * the first valid page (or run out of them).
+ */
+ for (bottom = 0; bottom < top; bottom++) {
+ if (page_ok(bottom))
+ break;
+ }
+
+ /* If we've got this far, we ran out of pages. */
+ if (bottom == top) {
+ fprintf(stderr, "Unable to determine bottom of address "
+ "space.\n");
exit(1);
}
+ printf("0x%x\n", bottom << UM_KERN_PAGE_SHIFT);
+ printf("Locating the top of the address space ... ");
+ fflush(stdout);
+
+ original = bottom;
+
/* This could happen with a 4G/4G split */
if (page_ok(top))
goto out;
@@ -114,7 +129,7 @@
out:
/* Restore the old SIGSEGV handling */
if (sigaction(SIGSEGV, &old, NULL)) {
- perror("os_get_task_size");
+ perror("os_get_top_address");
exit(1);
}
top <<= UM_KERN_PAGE_SHIFT;
diff --git a/arch/um/os-Linux/sys-x86_64/task_size.c b/arch/um/os-Linux/sys-x86_64/task_size.c
index fad6f57..26a0dd1 100644
--- a/arch/um/os-Linux/sys-x86_64/task_size.c
+++ b/arch/um/os-Linux/sys-x86_64/task_size.c
@@ -1,4 +1,4 @@
-unsigned long os_get_task_size(unsigned long shift)
+unsigned long os_get_top_address(unsigned long shift)
{
/* The old value of CONFIG_TOP_ADDR */
return 0x7fc0000000;
diff --git a/arch/um/os-Linux/time.c b/arch/um/os-Linux/time.c
index e492805..dec5678 100644
--- a/arch/um/os-Linux/time.c
+++ b/arch/um/os-Linux/time.c
@@ -9,7 +9,9 @@
#include <time.h>
#include <sys/time.h>
#include "kern_constants.h"
+#include "kern_util.h"
#include "os.h"
+#include "process.h"
#include "user.h"
int set_interval(void)
@@ -58,12 +60,17 @@
long long disable_timer(void)
{
struct itimerval time = ((struct itimerval) { { 0, 0 }, { 0, 0 } });
+ int remain, max = UM_NSEC_PER_SEC / UM_HZ;
if (setitimer(ITIMER_VIRTUAL, &time, &time) < 0)
printk(UM_KERN_ERR "disable_timer - setitimer failed, "
"errno = %d\n", errno);
- return timeval_to_ns(&time.it_value);
+ remain = timeval_to_ns(&time.it_value);
+ if (remain > max)
+ remain = max;
+
+ return remain;
}
long long os_nsecs(void)
@@ -79,7 +86,48 @@
{
return 0;
}
+
+static void deliver_alarm(void)
+{
+ alarm_handler(SIGVTALRM, NULL);
+}
+
+static unsigned long long sleep_time(unsigned long long nsecs)
+{
+ return nsecs;
+}
+
#else
+unsigned long long last_tick;
+unsigned long long skew;
+
+static void deliver_alarm(void)
+{
+ unsigned long long this_tick = os_nsecs();
+ int one_tick = UM_NSEC_PER_SEC / UM_HZ;
+
+ /* Protection against the host's time going backwards */
+ if ((last_tick != 0) && (this_tick < last_tick))
+ this_tick = last_tick;
+
+ if (last_tick == 0)
+ last_tick = this_tick - one_tick;
+
+ skew += this_tick - last_tick;
+
+ while (skew >= one_tick) {
+ alarm_handler(SIGVTALRM, NULL);
+ skew -= one_tick;
+ }
+
+ last_tick = this_tick;
+}
+
+static unsigned long long sleep_time(unsigned long long nsecs)
+{
+ return nsecs > skew ? nsecs - skew : 0;
+}
+
static inline long long timespec_to_us(const struct timespec *ts)
{
return ((long long) ts->tv_sec * UM_USEC_PER_SEC) +
@@ -102,6 +150,11 @@
*/
if (start_usecs > usec)
start_usecs = usec;
+
+ start_usecs -= skew / UM_NSEC_PER_USEC;
+ if (start_usecs < 0)
+ start_usecs = 0;
+
tv = ((struct timeval) { .tv_sec = start_usecs / UM_USEC_PER_SEC,
.tv_usec = start_usecs % UM_USEC_PER_SEC });
interval = ((struct itimerval) { { 0, usec }, tv });
@@ -113,8 +166,6 @@
}
#endif
-extern void alarm_handler(int sig, struct sigcontext *sc);
-
void idle_sleep(unsigned long long nsecs)
{
struct timespec ts;
@@ -126,10 +177,12 @@
*/
if (nsecs == 0)
nsecs = UM_NSEC_PER_SEC / UM_HZ;
+
+ nsecs = sleep_time(nsecs);
ts = ((struct timespec) { .tv_sec = nsecs / UM_NSEC_PER_SEC,
.tv_nsec = nsecs % UM_NSEC_PER_SEC });
if (nanosleep(&ts, &ts) == 0)
- alarm_handler(SIGVTALRM, NULL);
+ deliver_alarm();
after_sleep_interval(&ts);
}
diff --git a/arch/um/sys-i386/ptrace.c b/arch/um/sys-i386/ptrace.c
index 6b44999..c9b1765 100644
--- a/arch/um/sys-i386/ptrace.c
+++ b/arch/um/sys-i386/ptrace.c
@@ -148,14 +148,13 @@
int get_fpregs(struct user_i387_struct __user *buf, struct task_struct *child)
{
int err, n, cpu = ((struct thread_info *) child->stack)->cpu;
- long fpregs[HOST_FP_SIZE];
+ struct user_i387_struct fpregs;
- BUG_ON(sizeof(*buf) != sizeof(fpregs));
- err = save_fp_registers(userspace_pid[cpu], fpregs);
+ err = save_fp_registers(userspace_pid[cpu], (unsigned long *) &fpregs);
if (err)
return err;
- n = copy_to_user(buf, fpregs, sizeof(fpregs));
+ n = copy_to_user(buf, &fpregs, sizeof(fpregs));
if(n > 0)
return -EFAULT;
@@ -165,27 +164,26 @@
int set_fpregs(struct user_i387_struct __user *buf, struct task_struct *child)
{
int n, cpu = ((struct thread_info *) child->stack)->cpu;
- long fpregs[HOST_FP_SIZE];
+ struct user_i387_struct fpregs;
- BUG_ON(sizeof(*buf) != sizeof(fpregs));
- n = copy_from_user(fpregs, buf, sizeof(fpregs));
+ n = copy_from_user(&fpregs, buf, sizeof(fpregs));
if (n > 0)
return -EFAULT;
- return restore_fp_registers(userspace_pid[cpu], fpregs);
+ return restore_fp_registers(userspace_pid[cpu],
+ (unsigned long *) &fpregs);
}
int get_fpxregs(struct user_fxsr_struct __user *buf, struct task_struct *child)
{
int err, n, cpu = ((struct thread_info *) child->stack)->cpu;
- long fpregs[HOST_XFP_SIZE];
+ struct user_fxsr_struct fpregs;
- BUG_ON(sizeof(*buf) != sizeof(fpregs));
- err = save_fpx_registers(userspace_pid[cpu], fpregs);
+ err = save_fpx_registers(userspace_pid[cpu], (unsigned long *) &fpregs);
if (err)
return err;
- n = copy_to_user(buf, fpregs, sizeof(fpregs));
+ n = copy_to_user(buf, &fpregs, sizeof(fpregs));
if(n > 0)
return -EFAULT;
@@ -195,14 +193,14 @@
int set_fpxregs(struct user_fxsr_struct __user *buf, struct task_struct *child)
{
int n, cpu = ((struct thread_info *) child->stack)->cpu;
- long fpregs[HOST_XFP_SIZE];
+ struct user_fxsr_struct fpregs;
- BUG_ON(sizeof(*buf) != sizeof(fpregs));
- n = copy_from_user(fpregs, buf, sizeof(fpregs));
+ n = copy_from_user(&fpregs, buf, sizeof(fpregs));
if (n > 0)
return -EFAULT;
- return restore_fpx_registers(userspace_pid[cpu], fpregs);
+ return restore_fpx_registers(userspace_pid[cpu],
+ (unsigned long *) &fpregs);
}
long subarch_ptrace(struct task_struct *child, long request, long addr,
diff --git a/arch/um/sys-i386/user-offsets.c b/arch/um/sys-i386/user-offsets.c
index 39bd32b..5f883bf 100644
--- a/arch/um/sys-i386/user-offsets.c
+++ b/arch/um/sys-i386/user-offsets.c
@@ -22,7 +22,7 @@
OFFSET(HOST_SC_CR2, sigcontext, cr2);
DEFINE_LONGS(HOST_FP_SIZE, sizeof(struct user_fpregs_struct));
- DEFINE_LONGS(HOST_XFP_SIZE, sizeof(struct user_fpxregs_struct));
+ DEFINE_LONGS(HOST_FPX_SIZE, sizeof(struct user_fpxregs_struct));
DEFINE(HOST_IP, EIP);
DEFINE(HOST_SP, UESP);
diff --git a/arch/um/sys-x86_64/ksyms.c b/arch/um/sys-x86_64/ksyms.c
index 4d7d1a8..1db2fce 100644
--- a/arch/um/sys-x86_64/ksyms.c
+++ b/arch/um/sys-x86_64/ksyms.c
@@ -1,5 +1,11 @@
-#include "linux/module.h"
-#include "asm/string.h"
+#include <linux/module.h>
+#include <asm/string.h>
+#include <asm/checksum.h>
/*XXX: we need them because they would be exported by x86_64 */
+#if (__GNUC__ == 4 && __GNUC_MINOR__ >= 3) || __GNUC__ > 4
+EXPORT_SYMBOL(memcpy);
+#else
EXPORT_SYMBOL(__memcpy);
+#endif
+EXPORT_SYMBOL(csum_partial);
diff --git a/arch/um/sys-x86_64/user-offsets.c b/arch/um/sys-x86_64/user-offsets.c
index 2f3443c..9735854 100644
--- a/arch/um/sys-x86_64/user-offsets.c
+++ b/arch/um/sys-x86_64/user-offsets.c
@@ -24,7 +24,6 @@
OFFSET(HOST_SC_TRAPNO, sigcontext, trapno);
DEFINE(HOST_FP_SIZE, sizeof(struct _fpstate) / sizeof(unsigned long));
- DEFINE(HOST_XFP_SIZE, 0);
DEFINE_LONGS(HOST_RBX, RBX);
DEFINE_LONGS(HOST_RCX, RCX);
DEFINE_LONGS(HOST_RDI, RDI);
diff --git a/arch/v850/kernel/init_task.c b/arch/v850/kernel/init_task.c
index ed2f93c..44b274d 100644
--- a/arch/v850/kernel/init_task.c
+++ b/arch/v850/kernel/init_task.c
@@ -21,7 +21,6 @@
#include <asm/pgtable.h>
static struct fs_struct init_fs = INIT_FS;
-static struct files_struct init_files = INIT_FILES;
static struct signal_struct init_signals = INIT_SIGNALS (init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
struct mm_struct init_mm = INIT_MM (init_mm);
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index a1a9021..2d7dc41 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -26,17 +26,10 @@
select HAVE_KVM if ((X86_32 && !X86_VOYAGER && !X86_VISWS && !X86_NUMAQ) || X86_64)
select HAVE_ARCH_KGDB if !X86_VOYAGER
-config DEFCONFIG_LIST
+config ARCH_DEFCONFIG
string
- depends on X86_32
- option defconfig_list
- default "arch/x86/configs/i386_defconfig"
-
-config DEFCONFIG_LIST
- string
- depends on X86_64
- option defconfig_list
- default "arch/x86/configs/x86_64_defconfig"
+ default "arch/x86/configs/i386_defconfig" if X86_32
+ default "arch/x86/configs/x86_64_defconfig" if X86_64
config GENERIC_LOCKBREAK
@@ -1499,13 +1492,13 @@
config PCI_GODIRECT
bool "Direct"
-config PCI_GOANY
- bool "Any"
-
config PCI_GOOLPC
bool "OLPC"
depends on OLPC
+config PCI_GOANY
+ bool "Any"
+
endchoice
config PCI_BIOS
@@ -1522,9 +1515,8 @@
depends on X86_32 && PCI && ACPI && (PCI_GOMMCONFIG || PCI_GOANY)
config PCI_OLPC
- bool
- depends on PCI && PCI_GOOLPC
- default y
+ def_bool y
+ depends on PCI && OLPC && (PCI_GOOLPC || PCI_GOANY)
config PCI_DOMAINS
def_bool y
diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug
index ac1e31b..1836337 100644
--- a/arch/x86/Kconfig.debug
+++ b/arch/x86/Kconfig.debug
@@ -6,15 +6,19 @@
source "lib/Kconfig.debug"
config NONPROMISC_DEVMEM
- bool "Disable promiscuous /dev/mem"
+ bool "Filter access to /dev/mem"
help
- The /dev/mem file by default only allows userspace access to PCI
- space and the BIOS code and data regions. This is sufficient for
- dosemu and X and all common users of /dev/mem. With this config
- option, you allow userspace access to all of memory, including
- kernel and userspace memory. Accidental access to this is
- obviously disasterous, but specific access can be used by people
- debugging the kernel.
+ If this option is left off, you allow userspace access to all
+ of memory, including kernel and userspace memory. Accidental
+ access to this is obviously disastrous, but specific access can
+ be used by people debugging the kernel.
+
+ If this option is switched on, the /dev/mem file only allows
+ userspace access to PCI space and the BIOS code and data regions.
+ This is sufficient for dosemu and X and all common users of
+ /dev/mem.
+
+ If in doubt, say Y.
config EARLY_PRINTK
bool "Early printk" if EMBEDDED
diff --git a/arch/x86/boot/a20.c b/arch/x86/boot/a20.c
index 90943f8..e01aafd 100644
--- a/arch/x86/boot/a20.c
+++ b/arch/x86/boot/a20.c
@@ -115,8 +115,6 @@
int enable_a20(void)
{
- int loops = A20_ENABLE_LOOPS;
-
#if defined(CONFIG_X86_ELAN)
/* Elan croaks if we try to touch the KBC */
enable_a20_fast();
@@ -128,6 +126,7 @@
enable_a20_kbc();
return 0;
#else
+ int loops = A20_ENABLE_LOOPS;
while (loops--) {
/* First, check to see if A20 is already enabled
(legacy free, etc.) */
diff --git a/arch/x86/boot/printf.c b/arch/x86/boot/printf.c
index c1d00c02..50e47cd 100644
--- a/arch/x86/boot/printf.c
+++ b/arch/x86/boot/printf.c
@@ -56,7 +56,7 @@
if (type & LEFT)
type &= ~ZEROPAD;
if (base < 2 || base > 36)
- return 0;
+ return NULL;
c = (type & ZEROPAD) ? '0' : ' ';
sign = 0;
if (type & SIGN) {
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index c49ebcc..33c5216 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -242,12 +242,19 @@
static void __cpuinit acpi_register_lapic(int id, u8 enabled)
{
+ unsigned int ver = 0;
+
if (!enabled) {
++disabled_cpus;
return;
}
- generic_processor_info(id, 0);
+#ifdef CONFIG_X86_32
+ if (boot_cpu_physical_apicid != -1U)
+ ver = apic_version[boot_cpu_physical_apicid];
+#endif
+
+ generic_processor_info(id, ver);
}
static int __init
@@ -767,8 +774,13 @@
mp_lapic_addr = address;
set_fixmap_nocache(FIX_APIC_BASE, address);
- if (boot_cpu_physical_apicid == -1U)
+ if (boot_cpu_physical_apicid == -1U) {
boot_cpu_physical_apicid = GET_APIC_ID(read_apic_id());
+#ifdef CONFIG_X86_32
+ apic_version[boot_cpu_physical_apicid] =
+ GET_APIC_VERSION(apic_read(APIC_LVR));
+#endif
+ }
}
static int __init early_acpi_parse_madt_lapic_addr_ovr(void)
diff --git a/arch/x86/kernel/acpi/realmode/wakeup.lds.S b/arch/x86/kernel/acpi/realmode/wakeup.lds.S
index 22fab6c..7da00b7 100644
--- a/arch/x86/kernel/acpi/realmode/wakeup.lds.S
+++ b/arch/x86/kernel/acpi/realmode/wakeup.lds.S
@@ -12,11 +12,6 @@
SECTIONS
{
- . = HEADER_OFFSET;
- .header : {
- *(.header)
- }
-
. = 0;
.text : {
*(.text*)
@@ -50,6 +45,11 @@
__bss_end = .;
}
+ . = HEADER_OFFSET;
+ .header : {
+ *(.header)
+ }
+
. = ALIGN(16);
_end = .;
diff --git a/arch/x86/kernel/apic_64.c b/arch/x86/kernel/apic_64.c
index 5910020..0633cfd 100644
--- a/arch/x86/kernel/apic_64.c
+++ b/arch/x86/kernel/apic_64.c
@@ -534,7 +534,7 @@
*/
void clear_local_APIC(void)
{
- int maxlvt = lapic_get_maxlvt();
+ int maxlvt;
u32 v;
/* APIC hasn't been mapped yet */
diff --git a/arch/x86/kernel/cpu/cpufreq/longrun.c b/arch/x86/kernel/cpu/cpufreq/longrun.c
index af4a867..777a7ff 100644
--- a/arch/x86/kernel/cpu/cpufreq/longrun.c
+++ b/arch/x86/kernel/cpu/cpufreq/longrun.c
@@ -245,7 +245,7 @@
if ((ecx > 95) || (ecx == 0) || (eax < ebx))
return -EIO;
- edx = (eax - ebx) / (100 - ecx);
+ edx = ((eax - ebx) * 100) / (100 - ecx);
*low_freq = edx * 1000; /* back to kHz */
dprintk("low frequency is %u kHz\n", *low_freq);
diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
index 46d4034..206791e 100644
--- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
+++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c
@@ -1127,12 +1127,23 @@
* an UP version, and is deprecated by AMD.
*/
if (num_online_cpus() != 1) {
- printk(KERN_ERR PFX "MP systems not supported by PSB BIOS structure\n");
+#ifndef CONFIG_ACPI_PROCESSOR
+ printk(KERN_ERR PFX "ACPI Processor support is required "
+ "for SMP systems but is absent. Please load the "
+ "ACPI Processor module before starting this "
+ "driver.\n");
+#else
+ printk(KERN_ERR PFX "Your BIOS does not provide ACPI "
+ "_PSS objects in a way that Linux understands. "
+ "Please report this to the Linux ACPI maintainers"
+ " and complain to your BIOS vendor.\n");
+#endif
kfree(data);
return -ENODEV;
}
if (pol->cpu != 0) {
- printk(KERN_ERR PFX "No _PSS objects for CPU other than CPU0\n");
+ printk(KERN_ERR PFX "No ACPI _PSS objects for CPU other than "
+ "CPU0. Complain to your BIOS vendor.\n");
kfree(data);
return -ENODEV;
}
diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S
index 2a609dc..c778e4f 100644
--- a/arch/x86/kernel/entry_32.S
+++ b/arch/x86/kernel/entry_32.S
@@ -248,6 +248,7 @@
DISABLE_INTERRUPTS(CLBR_ANY) # make sure we don't miss an interrupt
# setting need_resched or sigpending
# between sampling and the iret
+ TRACE_IRQS_OFF
movl TI_flags(%ebp), %ecx
andl $_TIF_WORK_MASK, %ecx # is there any work to be done on
# int/exception return?
diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S
index b2cc737..f7357cc 100644
--- a/arch/x86/kernel/head_32.S
+++ b/arch/x86/kernel/head_32.S
@@ -189,7 +189,7 @@
* this stage.
*/
-#define KPMDS ((0x100000000-__PAGE_OFFSET) >> 30) /* Number of kernel PMDs */
+#define KPMDS (((-__PAGE_OFFSET) >> 30) & 3) /* Number of kernel PMDs */
xorl %ebx,%ebx /* %ebx is kept at zero */
diff --git a/arch/x86/kernel/i387.c b/arch/x86/kernel/i387.c
index e03cc95..eb9ddd8 100644
--- a/arch/x86/kernel/i387.c
+++ b/arch/x86/kernel/i387.c
@@ -56,6 +56,11 @@
void __init init_thread_xstate(void)
{
+ if (!HAVE_HWFP) {
+ xstate_size = sizeof(struct i387_soft_struct);
+ return;
+ }
+
if (cpu_has_fxsr)
xstate_size = sizeof(struct i387_fxsave_struct);
#ifdef CONFIG_X86_32
@@ -94,7 +99,7 @@
int init_fpu(struct task_struct *tsk)
{
if (tsk_used_math(tsk)) {
- if (tsk == current)
+ if (HAVE_HWFP && tsk == current)
unlazy_fpu(tsk);
return 0;
}
@@ -109,6 +114,15 @@
return -ENOMEM;
}
+#ifdef CONFIG_X86_32
+ if (!HAVE_HWFP) {
+ memset(tsk->thread.xstate, 0, xstate_size);
+ finit();
+ set_stopped_child_used_math(tsk);
+ return 0;
+ }
+#endif
+
if (cpu_has_fxsr) {
struct i387_fxsave_struct *fx = &tsk->thread.xstate->fxsave;
@@ -330,13 +344,13 @@
struct user_i387_ia32_struct env;
int ret;
- if (!HAVE_HWFP)
- return fpregs_soft_get(target, regset, pos, count, kbuf, ubuf);
-
ret = init_fpu(target);
if (ret)
return ret;
+ if (!HAVE_HWFP)
+ return fpregs_soft_get(target, regset, pos, count, kbuf, ubuf);
+
if (!cpu_has_fxsr) {
return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
&target->thread.xstate->fsave, 0,
@@ -360,15 +374,15 @@
struct user_i387_ia32_struct env;
int ret;
- if (!HAVE_HWFP)
- return fpregs_soft_set(target, regset, pos, count, kbuf, ubuf);
-
ret = init_fpu(target);
if (ret)
return ret;
set_stopped_child_used_math(target);
+ if (!HAVE_HWFP)
+ return fpregs_soft_set(target, regset, pos, count, kbuf, ubuf);
+
if (!cpu_has_fxsr) {
return user_regset_copyin(&pos, &count, &kbuf, &ubuf,
&target->thread.xstate->fsave, 0, -1);
@@ -474,18 +488,18 @@
int restore_i387_ia32(struct _fpstate_ia32 __user *buf)
{
int err;
+ struct task_struct *tsk = current;
- if (HAVE_HWFP) {
- struct task_struct *tsk = current;
-
+ if (HAVE_HWFP)
clear_fpu(tsk);
- if (!used_math()) {
- err = init_fpu(tsk);
- if (err)
- return err;
- }
+ if (!used_math()) {
+ err = init_fpu(tsk);
+ if (err)
+ return err;
+ }
+ if (HAVE_HWFP) {
if (cpu_has_fxsr)
err = restore_i387_fxsave(buf);
else
diff --git a/arch/x86/kernel/init_task.c b/arch/x86/kernel/init_task.c
index 3d01e47..a4f93b4 100644
--- a/arch/x86/kernel/init_task.c
+++ b/arch/x86/kernel/init_task.c
@@ -11,7 +11,6 @@
#include <asm/desc.h>
static struct fs_struct init_fs = INIT_FS;
-static struct files_struct init_files = INIT_FILES;
static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
struct mm_struct init_mm = INIT_MM(init_mm);
diff --git a/arch/x86/kernel/io_apic_32.c b/arch/x86/kernel/io_apic_32.c
index a40d54f..4dc8600d9 100644
--- a/arch/x86/kernel/io_apic_32.c
+++ b/arch/x86/kernel/io_apic_32.c
@@ -2130,14 +2130,10 @@
{
int apic1, pin1, apic2, pin2;
int vector;
- unsigned int ver;
unsigned long flags;
local_irq_save(flags);
- ver = apic_read(APIC_LVR);
- ver = GET_APIC_VERSION(ver);
-
/*
* get/set the timer IRQ vector:
*/
@@ -2150,15 +2146,11 @@
* mode for the 8259A whenever interrupts are routed
* through I/O APICs. Also IRQ0 has to be enabled in
* the 8259A which implies the virtual wire has to be
- * disabled in the local APIC. Finally timer interrupts
- * need to be acknowledged manually in the 8259A for
- * timer_interrupt() and for the i82489DX when using
- * the NMI watchdog.
+ * disabled in the local APIC.
*/
apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT);
init_8259A(1);
- timer_ack = !cpu_has_tsc;
- timer_ack |= (nmi_watchdog == NMI_IO_APIC && !APIC_INTEGRATED(ver));
+ timer_ack = 1;
if (timer_over_8254 > 0)
enable_8259A_irq(0);
diff --git a/arch/x86/kernel/kvmclock.c b/arch/x86/kernel/kvmclock.c
index 4bc1be5..08a3098 100644
--- a/arch/x86/kernel/kvmclock.c
+++ b/arch/x86/kernel/kvmclock.c
@@ -53,7 +53,7 @@
* have elapsed since the hypervisor wrote the data. So we try to account for
* that with system time
*/
-unsigned long kvm_get_wallclock(void)
+static unsigned long kvm_get_wallclock(void)
{
u32 wc_sec, wc_nsec;
u64 delta;
@@ -86,7 +86,7 @@
return ts.tv_sec + 1;
}
-int kvm_set_wallclock(unsigned long now)
+static int kvm_set_wallclock(unsigned long now)
{
return 0;
}
diff --git a/arch/x86/kernel/mfgpt_32.c b/arch/x86/kernel/mfgpt_32.c
index 3cad17f..07c0f82 100644
--- a/arch/x86/kernel/mfgpt_32.c
+++ b/arch/x86/kernel/mfgpt_32.c
@@ -155,6 +155,7 @@
wrmsr(msr, value, dummy);
return 0;
}
+EXPORT_SYMBOL_GPL(geode_mfgpt_toggle_event);
int geode_mfgpt_set_irq(int timer, int cmp, int irq, int enable)
{
@@ -222,6 +223,7 @@
/* No timers available - too bad */
return -1;
}
+EXPORT_SYMBOL_GPL(geode_mfgpt_alloc_timer);
#ifdef CONFIG_GEODE_MFGPT_TIMER
diff --git a/arch/x86/kernel/nmi_32.c b/arch/x86/kernel/nmi_32.c
index 11b14bb..84160f7 100644
--- a/arch/x86/kernel/nmi_32.c
+++ b/arch/x86/kernel/nmi_32.c
@@ -26,7 +26,6 @@
#include <asm/smp.h>
#include <asm/nmi.h>
-#include <asm/timer.h>
#include "mach_traps.h"
@@ -82,7 +81,7 @@
prev_nmi_count = kmalloc(NR_CPUS * sizeof(int), GFP_KERNEL);
if (!prev_nmi_count)
- goto error;
+ return -1;
printk(KERN_INFO "Testing NMI watchdog ... ");
@@ -119,7 +118,7 @@
if (!atomic_read(&nmi_active)) {
kfree(prev_nmi_count);
atomic_set(&nmi_active, -1);
- goto error;
+ return -1;
}
printk("OK.\n");
@@ -130,10 +129,6 @@
kfree(prev_nmi_count);
return 0;
-error:
- timer_ack = !cpu_has_tsc;
-
- return -1;
}
static int __init setup_nmi_watchdog(char *str)
diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c
index 0c37f16..dc00a13 100644
--- a/arch/x86/kernel/pci-dma.c
+++ b/arch/x86/kernel/pci-dma.c
@@ -378,6 +378,7 @@
struct page *page;
unsigned long dma_mask = 0;
dma_addr_t bus;
+ int noretry = 0;
/* ignore region specifiers */
gfp &= ~(__GFP_DMA | __GFP_HIGHMEM | __GFP_DMA32);
@@ -385,30 +386,37 @@
if (dma_alloc_from_coherent_mem(dev, size, dma_handle, &memory))
return memory;
- if (!dev)
+ if (!dev) {
dev = &fallback_dev;
+ gfp |= GFP_DMA;
+ }
dma_mask = dev->coherent_dma_mask;
if (dma_mask == 0)
- dma_mask = DMA_32BIT_MASK;
+ dma_mask = (gfp & GFP_DMA) ? DMA_24BIT_MASK : DMA_32BIT_MASK;
/* Device not DMA able */
if (dev->dma_mask == NULL)
return NULL;
- /* Don't invoke OOM killer */
- gfp |= __GFP_NORETRY;
+ /* Don't invoke OOM killer or retry in lower 16MB DMA zone */
+ if (gfp & __GFP_DMA)
+ noretry = 1;
#ifdef CONFIG_X86_64
/* Why <=? Even when the mask is smaller than 4GB it is often
larger than 16MB and in this case we have a chance of
finding fitting memory in the next higher zone first. If
not retry with true GFP_DMA. -AK */
- if (dma_mask <= DMA_32BIT_MASK)
+ if (dma_mask <= DMA_32BIT_MASK && !(gfp & GFP_DMA)) {
gfp |= GFP_DMA32;
+ if (dma_mask < DMA_32BIT_MASK)
+ noretry = 1;
+ }
#endif
again:
- page = dma_alloc_pages(dev, gfp, get_order(size));
+ page = dma_alloc_pages(dev,
+ noretry ? gfp | __GFP_NORETRY : gfp, get_order(size));
if (page == NULL)
return NULL;
diff --git a/arch/x86/kernel/pci-gart_64.c b/arch/x86/kernel/pci-gart_64.c
index c07455d..aa8ec92 100644
--- a/arch/x86/kernel/pci-gart_64.c
+++ b/arch/x86/kernel/pci-gart_64.c
@@ -26,6 +26,7 @@
#include <linux/kdebug.h>
#include <linux/scatterlist.h>
#include <linux/iommu-helper.h>
+#include <linux/sysdev.h>
#include <asm/atomic.h>
#include <asm/io.h>
#include <asm/mtrr.h>
@@ -548,6 +549,28 @@
return aper_base;
}
+static int gart_resume(struct sys_device *dev)
+{
+ return 0;
+}
+
+static int gart_suspend(struct sys_device *dev, pm_message_t state)
+{
+ return -EINVAL;
+}
+
+static struct sysdev_class gart_sysdev_class = {
+ .name = "gart",
+ .suspend = gart_suspend,
+ .resume = gart_resume,
+
+};
+
+static struct sys_device device_gart = {
+ .id = 0,
+ .cls = &gart_sysdev_class,
+};
+
/*
* Private Northbridge GATT initialization in case we cannot use the
* AGP driver for some reason.
@@ -558,7 +581,7 @@
unsigned aper_base, new_aper_base;
struct pci_dev *dev;
void *gatt;
- int i;
+ int i, error;
printk(KERN_INFO "PCI-DMA: Disabling AGP.\n");
aper_size = aper_base = info->aper_size = 0;
@@ -606,6 +629,12 @@
pci_write_config_dword(dev, 0x90, ctl);
}
+
+ error = sysdev_class_register(&gart_sysdev_class);
+ if (!error)
+ error = sysdev_register(&device_gart);
+ if (error)
+ panic("Could not register gart_sysdev -- would corrupt data on next suspend");
flush_gart();
printk(KERN_INFO "PCI-DMA: aperture base @ %x size %u KB\n",
diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
index 67e9b4a..ba370dc 100644
--- a/arch/x86/kernel/process.c
+++ b/arch/x86/kernel/process.c
@@ -99,15 +99,6 @@
local_irq_enable();
}
-
-static int __cpuinit mwait_usable(const struct cpuinfo_x86 *c)
-{
- if (force_mwait)
- return 1;
- /* Any C1 states supported? */
- return c->cpuid_level >= 5 && ((cpuid_edx(5) >> 4) & 0xf) > 0;
-}
-
/*
* On SMP it's slightly faster (but much more power-consuming!)
* to poll the ->work.need_resched flag instead of waiting for the
@@ -119,6 +110,33 @@
cpu_relax();
}
+/*
+ * mwait selection logic:
+ *
+ * It depends on the CPU. For AMD CPUs that support MWAIT this is
+ * wrong. Family 0x10 and 0x11 CPUs will enter C1 on HLT. Powersavings
+ * then depend on a clock divisor and current Pstate of the core. If
+ * all cores of a processor are in halt state (C1) the processor can
+ * enter the C1E (C1 enhanced) state. If mwait is used this will never
+ * happen.
+ *
+ * idle=mwait overrides this decision and forces the usage of mwait.
+ */
+static int __cpuinit mwait_usable(const struct cpuinfo_x86 *c)
+{
+ if (force_mwait)
+ return 1;
+
+ if (c->x86_vendor == X86_VENDOR_AMD) {
+ switch(c->x86) {
+ case 0x10:
+ case 0x11:
+ return 0;
+ }
+ }
+ return 1;
+}
+
void __cpuinit select_idle_routine(const struct cpuinfo_x86 *c)
{
static int selected;
diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c
index f8476df..6d54833 100644
--- a/arch/x86/kernel/process_32.c
+++ b/arch/x86/kernel/process_32.c
@@ -649,8 +649,11 @@
/* If the task has used fpu the last 5 timeslices, just do a full
* restore of the math state immediately to avoid the trap; the
* chances of needing FPU soon are obviously high now
+ *
+ * tsk_used_math() checks prevent calling math_state_restore(),
+ * which can sleep in the case of !tsk_used_math()
*/
- if (next_p->fpu_counter > 5)
+ if (tsk_used_math(next_p) && next_p->fpu_counter > 5)
math_state_restore();
/*
diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c
index e2319f3..ac54ff5 100644
--- a/arch/x86/kernel/process_64.c
+++ b/arch/x86/kernel/process_64.c
@@ -658,8 +658,11 @@
/* If the task has used fpu the last 5 timeslices, just do a full
* restore of the math state immediately to avoid the trap; the
* chances of needing FPU soon are obviously high now
+ *
+ * tsk_used_math() checks prevent calling math_state_restore(),
+ * which can sleep in the case of !tsk_used_math()
*/
- if (next_p->fpu_counter>5)
+ if (tsk_used_math(next_p) && next_p->fpu_counter > 5)
math_state_restore();
return prev_p;
}
diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c
index fb03ef3..a7835f2 100644
--- a/arch/x86/kernel/ptrace.c
+++ b/arch/x86/kernel/ptrace.c
@@ -1303,6 +1303,9 @@
#define genregs32_get genregs_get
#define genregs32_set genregs_set
+#define user_i387_ia32_struct user_i387_struct
+#define user32_fxsr_struct user_fxsr_struct
+
#endif /* CONFIG_X86_64 */
#if defined CONFIG_X86_32 || defined CONFIG_IA32_EMULATION
@@ -1315,13 +1318,13 @@
},
[REGSET_FP] = {
.core_note_type = NT_PRFPREG,
- .n = sizeof(struct user_i387_struct) / sizeof(u32),
+ .n = sizeof(struct user_i387_ia32_struct) / sizeof(u32),
.size = sizeof(u32), .align = sizeof(u32),
.active = fpregs_active, .get = fpregs_get, .set = fpregs_set
},
[REGSET_XFP] = {
.core_note_type = NT_PRXFPREG,
- .n = sizeof(struct user_i387_struct) / sizeof(u32),
+ .n = sizeof(struct user32_fxsr_struct) / sizeof(u32),
.size = sizeof(u32), .align = sizeof(u32),
.active = xfpregs_active, .get = xfpregs_get, .set = xfpregs_set
},
diff --git a/arch/x86/kernel/rtc.c b/arch/x86/kernel/rtc.c
index 9615eee..05191bb 100644
--- a/arch/x86/kernel/rtc.c
+++ b/arch/x86/kernel/rtc.c
@@ -4,6 +4,8 @@
#include <linux/acpi.h>
#include <linux/bcd.h>
#include <linux/mc146818rtc.h>
+#include <linux/platform_device.h>
+#include <linux/pnp.h>
#include <asm/time.h>
#include <asm/vsyscall.h>
@@ -197,3 +199,35 @@
}
EXPORT_SYMBOL(native_read_tsc);
+
+static struct resource rtc_resources[] = {
+ [0] = {
+ .start = RTC_PORT(0),
+ .end = RTC_PORT(1),
+ .flags = IORESOURCE_IO,
+ },
+ [1] = {
+ .start = RTC_IRQ,
+ .end = RTC_IRQ,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct platform_device rtc_device = {
+ .name = "rtc_cmos",
+ .id = -1,
+ .resource = rtc_resources,
+ .num_resources = ARRAY_SIZE(rtc_resources),
+};
+
+static __init int add_rtc_cmos(void)
+{
+#ifdef CONFIG_PNP
+ if (!pnp_platform_devices)
+ platform_device_register(&rtc_device);
+#else
+ platform_device_register(&rtc_device);
+#endif /* CONFIG_PNP */
+ return 0;
+}
+device_initcall(add_rtc_cmos);
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index c0c68c1..6f80b85 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -12,6 +12,7 @@
#include <asm/mpspec.h>
#include <asm/apicdef.h>
+#ifdef CONFIG_X86_LOCAL_APIC
unsigned int num_processors;
unsigned disabled_cpus __cpuinitdata;
/* Processor that is doing the boot up */
@@ -23,8 +24,9 @@
/* Bitmask of physically existing CPUs */
physid_mask_t phys_cpu_present_map;
+#endif
-#if defined(CONFIG_HAVE_SETUP_PER_CPU_AREA) && defined(CONFIG_SMP)
+#if defined(CONFIG_HAVE_SETUP_PER_CPU_AREA) && defined(CONFIG_X86_SMP)
/*
* Copy data used in early init routines from the initial arrays to the
* per cpu data areas. These arrays then become expendable and the
diff --git a/arch/x86/kernel/setup_64.c b/arch/x86/kernel/setup_64.c
index f2fc8fe..6dff128 100644
--- a/arch/x86/kernel/setup_64.c
+++ b/arch/x86/kernel/setup_64.c
@@ -951,7 +951,7 @@
static void __cpuinit early_init_centaur(struct cpuinfo_x86 *c)
{
if (c->x86 == 0x6 && c->x86_model >= 0xf)
- set_bit(X86_FEATURE_CONSTANT_TSC, &c->x86_capability);
+ set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
}
static void __cpuinit init_centaur(struct cpuinfo_x86 *c)
diff --git a/arch/x86/kernel/smp.c b/arch/x86/kernel/smp.c
index 8f75893..0cb7aad 100644
--- a/arch/x86/kernel/smp.c
+++ b/arch/x86/kernel/smp.c
@@ -231,7 +231,8 @@
wmb();
/* Send a message to other CPUs */
- if (cpus_equal(mask, allbutself))
+ if (cpus_equal(mask, allbutself) &&
+ cpus_equal(cpu_online_map, cpu_callout_map))
send_IPI_allbutself(CALL_FUNCTION_VECTOR);
else
send_IPI_mask(mask, CALL_FUNCTION_VECTOR);
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 6b087ab..56078d6 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -86,6 +86,7 @@
#ifdef CONFIG_X86_32
u8 apicid_2_node[MAX_APICID];
+static int low_mappings;
#endif
/* State of each CPU */
@@ -326,6 +327,12 @@
enable_8259A_irq(0);
}
+#ifdef CONFIG_X86_32
+ while (low_mappings)
+ cpu_relax();
+ __flush_tlb_all();
+#endif
+
/* This must be done before setting cpu_online_map */
set_cpu_sibling_map(raw_smp_processor_id());
wmb();
@@ -1040,14 +1047,20 @@
#ifdef CONFIG_X86_32
/* init low mem mapping */
clone_pgd_range(swapper_pg_dir, swapper_pg_dir + KERNEL_PGD_BOUNDARY,
- min_t(unsigned long, KERNEL_PGD_PTRS, KERNEL_PGD_BOUNDARY));
+ min_t(unsigned long, KERNEL_PGD_PTRS, KERNEL_PGD_BOUNDARY));
flush_tlb_all();
-#endif
+ low_mappings = 1;
err = do_boot_cpu(apicid, cpu);
- if (err < 0) {
+
+ zap_low_mappings();
+ low_mappings = 0;
+#else
+ err = do_boot_cpu(apicid, cpu);
+#endif
+ if (err) {
Dprintk("do_boot_cpu failed %d\n", err);
- return err;
+ return -EIO;
}
/*
@@ -1177,6 +1190,7 @@
*/
void __init native_smp_prepare_cpus(unsigned int max_cpus)
{
+ preempt_disable();
nmi_watchdog_default();
smp_cpu_index_default();
current_cpu_data = boot_cpu_data;
@@ -1193,7 +1207,7 @@
if (smp_sanity_check(max_cpus) < 0) {
printk(KERN_INFO "SMP disabled\n");
disable_smp();
- return;
+ goto out;
}
preempt_disable();
@@ -1233,6 +1247,8 @@
printk(KERN_INFO "CPU%d: ", 0);
print_cpu_info(&cpu_data(0));
setup_boot_clock();
+out:
+ preempt_enable();
}
/*
* Early setup to make printk work.
@@ -1259,9 +1275,6 @@
setup_ioapic_dest();
#endif
check_nmi_watchdog();
-#ifdef CONFIG_X86_32
- zap_low_mappings();
-#endif
}
#ifdef CONFIG_HOTPLUG_CPU
diff --git a/arch/x86/kernel/traps_32.c b/arch/x86/kernel/traps_32.c
index bde6f63..08d752d 100644
--- a/arch/x86/kernel/traps_32.c
+++ b/arch/x86/kernel/traps_32.c
@@ -544,6 +544,7 @@
#define DO_ERROR(trapnr, signr, str, name) \
void do_##name(struct pt_regs *regs, long error_code) \
{ \
+ trace_hardirqs_fixup(); \
if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) \
== NOTIFY_STOP) \
return; \
diff --git a/arch/x86/kernel/tsc_32.c b/arch/x86/kernel/tsc_32.c
index e479072..068759d 100644
--- a/arch/x86/kernel/tsc_32.c
+++ b/arch/x86/kernel/tsc_32.c
@@ -14,7 +14,7 @@
#include "mach_timer.h"
-static int tsc_enabled;
+static int tsc_disabled;
/*
* On some systems the TSC frequency does not
@@ -28,8 +28,8 @@
static int __init tsc_setup(char *str)
{
printk(KERN_WARNING "notsc: Kernel compiled with CONFIG_X86_TSC, "
- "cannot disable TSC completely.\n");
- mark_tsc_unstable("user disabled TSC");
+ "cannot disable TSC completely.\n");
+ tsc_disabled = 1;
return 1;
}
#else
@@ -120,7 +120,7 @@
* very important for it to be as fast as the platform
* can achive it. )
*/
- if (unlikely(!tsc_enabled && !tsc_unstable))
+ if (unlikely(tsc_disabled))
/* No locking but a rare wrong value is not a big deal: */
return (jiffies_64 - INITIAL_JIFFIES) * (1000000000 / HZ);
@@ -322,7 +322,6 @@
{
if (!tsc_unstable) {
tsc_unstable = 1;
- tsc_enabled = 0;
printk("Marking TSC unstable due to: %s.\n", reason);
/* Can be called before registration */
if (clocksource_tsc.mult)
@@ -336,7 +335,7 @@
static int __init dmi_mark_tsc_unstable(const struct dmi_system_id *d)
{
printk(KERN_NOTICE "%s detected: marking TSC unstable.\n",
- d->ident);
+ d->ident);
tsc_unstable = 1;
return 0;
}
@@ -403,14 +402,22 @@
{
int cpu;
- if (!cpu_has_tsc)
+ if (!cpu_has_tsc || tsc_disabled) {
+ /* Disable the TSC in case of !cpu_has_tsc */
+ tsc_disabled = 1;
return;
+ }
cpu_khz = calculate_cpu_khz();
tsc_khz = cpu_khz;
if (!cpu_khz) {
mark_tsc_unstable("could not calculate TSC khz");
+ /*
+ * We need to disable the TSC completely in this case
+ * to prevent sched_clock() from using it.
+ */
+ tsc_disabled = 1;
return;
}
@@ -441,8 +448,6 @@
if (check_tsc_unstable()) {
clocksource_tsc.rating = 0;
clocksource_tsc.flags &= ~CLOCK_SOURCE_IS_CONTINUOUS;
- } else
- tsc_enabled = 1;
-
+ }
clocksource_register(&clocksource_tsc);
}
diff --git a/arch/x86/kernel/tsc_64.c b/arch/x86/kernel/tsc_64.c
index fcc16e5..1784b80 100644
--- a/arch/x86/kernel/tsc_64.c
+++ b/arch/x86/kernel/tsc_64.c
@@ -227,14 +227,14 @@
/* hpet or pmtimer available ? */
if (!hpet && !pm1 && !pm2) {
printk(KERN_INFO "TSC calibrated against PIT\n");
- return;
+ goto out;
}
/* Check, whether the sampling was disturbed by an SMI */
if (tsc1 == ULONG_MAX || tsc2 == ULONG_MAX) {
printk(KERN_WARNING "TSC calibration disturbed by SMI, "
"using PIT calibration result\n");
- return;
+ goto out;
}
tsc2 = (tsc2 - tsc1) * 1000000L;
@@ -255,6 +255,7 @@
tsc_khz = tsc2 / tsc1;
+out:
for_each_possible_cpu(cpu)
set_cyc2ns_scale(tsc_khz, cpu);
}
diff --git a/arch/x86/kernel/x8664_ksyms_64.c b/arch/x86/kernel/x8664_ksyms_64.c
index 58882f9..f6c05d0 100644
--- a/arch/x86/kernel/x8664_ksyms_64.c
+++ b/arch/x86/kernel/x8664_ksyms_64.c
@@ -2,6 +2,7 @@
All C exports should go in the respective C files. */
#include <linux/module.h>
+#include <net/checksum.h>
#include <linux/smp.h>
#include <asm/processor.h>
@@ -29,6 +30,8 @@
EXPORT_SYMBOL(copy_page);
EXPORT_SYMBOL(clear_page);
+EXPORT_SYMBOL(csum_partial);
+
/*
* Export string functions. We normally rely on gcc builtin for most of these,
* but gcc sometimes decides not to inline them.
diff --git a/arch/x86/kvm/i8254.c b/arch/x86/kvm/i8254.c
index 3324d90..f2f5d26 100644
--- a/arch/x86/kvm/i8254.c
+++ b/arch/x86/kvm/i8254.c
@@ -200,7 +200,6 @@
atomic_inc(&pt->pending);
smp_mb__after_atomic_inc();
- /* FIXME: handle case where the guest is in guest mode */
if (vcpu0 && waitqueue_active(&vcpu0->wq)) {
vcpu0->arch.mp_state = KVM_MP_STATE_RUNNABLE;
wake_up_interruptible(&vcpu0->wq);
@@ -216,7 +215,7 @@
{
struct kvm_pit *pit = vcpu->kvm->arch.vpit;
- if (pit && vcpu->vcpu_id == 0)
+ if (pit && vcpu->vcpu_id == 0 && pit->pit_state.inject_pending)
return atomic_read(&pit->pit_state.pit_timer.pending);
return 0;
@@ -237,6 +236,19 @@
return HRTIMER_NORESTART;
}
+void __kvm_migrate_pit_timer(struct kvm_vcpu *vcpu)
+{
+ struct kvm_pit *pit = vcpu->kvm->arch.vpit;
+ struct hrtimer *timer;
+
+ if (vcpu->vcpu_id != 0 || !pit)
+ return;
+
+ timer = &pit->pit_state.pit_timer.timer;
+ if (hrtimer_cancel(timer))
+ hrtimer_start(timer, timer->expires, HRTIMER_MODE_ABS);
+}
+
static void destroy_pit_timer(struct kvm_kpit_timer *pt)
{
pr_debug("pit: execute del timer!\n");
diff --git a/arch/x86/kvm/irq.c b/arch/x86/kvm/irq.c
index ce1f583..76d736b 100644
--- a/arch/x86/kvm/irq.c
+++ b/arch/x86/kvm/irq.c
@@ -94,3 +94,9 @@
/* TODO: PIT, RTC etc. */
}
EXPORT_SYMBOL_GPL(kvm_timer_intr_post);
+
+void __kvm_migrate_timers(struct kvm_vcpu *vcpu)
+{
+ __kvm_migrate_apic_timer(vcpu);
+ __kvm_migrate_pit_timer(vcpu);
+}
diff --git a/arch/x86/kvm/irq.h b/arch/x86/kvm/irq.h
index 1802134..2a15be2 100644
--- a/arch/x86/kvm/irq.h
+++ b/arch/x86/kvm/irq.h
@@ -84,6 +84,8 @@
void kvm_inject_pending_timer_irqs(struct kvm_vcpu *vcpu);
void kvm_inject_apic_timer_irqs(struct kvm_vcpu *vcpu);
void __kvm_migrate_apic_timer(struct kvm_vcpu *vcpu);
+void __kvm_migrate_pit_timer(struct kvm_vcpu *vcpu);
+void __kvm_migrate_timers(struct kvm_vcpu *vcpu);
int pit_has_pending_timer(struct kvm_vcpu *vcpu);
int apic_has_pending_timer(struct kvm_vcpu *vcpu);
diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index 36809d7..c297c50 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -957,7 +957,7 @@
{
struct kvm_lapic *lapic = vcpu->arch.apic;
- if (lapic)
+ if (lapic && apic_enabled(lapic) && apic_lvt_enabled(lapic, APIC_LVTT))
return atomic_read(&lapic->timer.pending);
return 0;
diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c
index 36c5406..ee3f530 100644
--- a/arch/x86/kvm/mmu.c
+++ b/arch/x86/kvm/mmu.c
@@ -658,7 +658,7 @@
u64 *end;
for (pos = spt, end = pos + PAGE_SIZE / sizeof(u64); pos != end; pos++)
- if (*pos != shadow_trap_nonpresent_pte) {
+ if (is_shadow_present_pte(*pos)) {
printk(KERN_ERR "%s: %p %llx\n", __func__,
pos, *pos);
return 0;
@@ -1858,6 +1858,7 @@
sp = container_of(vcpu->kvm->arch.active_mmu_pages.next,
struct kvm_mmu_page, link);
kvm_mmu_zap_page(vcpu->kvm, sp);
+ cond_resched();
}
free_page((unsigned long)vcpu->arch.mmu.pae_root);
}
@@ -1996,7 +1997,7 @@
.seeks = DEFAULT_SEEKS * 10,
};
-void mmu_destroy_caches(void)
+static void mmu_destroy_caches(void)
{
if (pte_chain_cache)
kmem_cache_destroy(pte_chain_cache);
diff --git a/arch/x86/kvm/paging_tmpl.h b/arch/x86/kvm/paging_tmpl.h
index 156fe10..934c7b6 100644
--- a/arch/x86/kvm/paging_tmpl.h
+++ b/arch/x86/kvm/paging_tmpl.h
@@ -418,7 +418,7 @@
/* mmio */
if (is_error_pfn(pfn)) {
- pgprintk("gfn %x is mmio\n", walker.gfn);
+ pgprintk("gfn %lx is mmio\n", walker.gfn);
kvm_release_pfn_clean(pfn);
return 1;
}
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index ab22615..6b0d5fa 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -688,7 +688,7 @@
delta = vcpu->arch.host_tsc - tsc_this;
svm->vmcb->control.tsc_offset += delta;
vcpu->cpu = cpu;
- kvm_migrate_apic_timer(vcpu);
+ kvm_migrate_timers(vcpu);
}
for (i = 0; i < NR_HOST_SAVE_USER_MSRS; i++)
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c
index bfe4db1..02efbe7 100644
--- a/arch/x86/kvm/vmx.c
+++ b/arch/x86/kvm/vmx.c
@@ -608,7 +608,7 @@
if (vcpu->cpu != cpu) {
vcpu_clear(vmx);
- kvm_migrate_apic_timer(vcpu);
+ kvm_migrate_timers(vcpu);
vpid_sync_vcpu_all(vmx);
}
@@ -1036,6 +1036,7 @@
static void hardware_disable(void *garbage)
{
asm volatile (ASM_VMX_VMXOFF : : : "cc");
+ write_cr4(read_cr4() & ~X86_CR4_VMXE);
}
static __init int adjust_vmx_controls(u32 ctl_min, u32 ctl_opt,
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 21338bd..00acf13 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -2758,7 +2758,7 @@
if (vcpu->requests) {
if (test_and_clear_bit(KVM_REQ_MIGRATE_TIMER, &vcpu->requests))
- __kvm_migrate_apic_timer(vcpu);
+ __kvm_migrate_timers(vcpu);
if (test_and_clear_bit(KVM_REQ_REPORT_TPR_ACCESS,
&vcpu->requests)) {
kvm_run->exit_reason = KVM_EXIT_TPR_ACCESS;
diff --git a/arch/x86/kvm/x86_emulate.c b/arch/x86/kvm/x86_emulate.c
index f2a696d..932f216 100644
--- a/arch/x86/kvm/x86_emulate.c
+++ b/arch/x86/kvm/x86_emulate.c
@@ -677,8 +677,9 @@
c->use_modrm_ea = 1;
if (c->modrm_mod == 3) {
- c->modrm_val = *(unsigned long *)
- decode_register(c->modrm_rm, c->regs, c->d & ByteOp);
+ c->modrm_ptr = decode_register(c->modrm_rm,
+ c->regs, c->d & ByteOp);
+ c->modrm_val = *(unsigned long *)c->modrm_ptr;
return rc;
}
@@ -1005,6 +1006,7 @@
if ((c->d & ModRM) && c->modrm_mod == 3) {
c->src.type = OP_REG;
c->src.val = c->modrm_val;
+ c->src.ptr = c->modrm_ptr;
break;
}
c->src.type = OP_MEM;
@@ -1049,6 +1051,7 @@
if ((c->d & ModRM) && c->modrm_mod == 3) {
c->dst.type = OP_REG;
c->dst.val = c->dst.orig_val = c->modrm_val;
+ c->dst.ptr = c->modrm_ptr;
break;
}
c->dst.type = OP_MEM;
@@ -1724,7 +1727,8 @@
if (rc)
goto done;
- kvm_emulate_hypercall(ctxt->vcpu);
+ /* Let the processor re-execute the fixed hypercall */
+ c->eip = ctxt->vcpu->arch.rip;
/* Disable writeback. */
c->dst.type = OP_NONE;
break;
diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c
index af65b2d..5c7e2fd 100644
--- a/arch/x86/lguest/boot.c
+++ b/arch/x86/lguest/boot.c
@@ -582,8 +582,9 @@
int vector = FIRST_EXTERNAL_VECTOR + i;
if (vector != SYSCALL_VECTOR) {
set_intr_gate(vector, interrupt[i]);
- set_irq_chip_and_handler(i, &lguest_irq_controller,
- handle_level_irq);
+ set_irq_chip_and_handler_name(i, &lguest_irq_controller,
+ handle_level_irq,
+ "level");
}
}
/* This call is required to set up for 4k stacks, where we have
diff --git a/arch/x86/lib/csum-partial_64.c b/arch/x86/lib/csum-partial_64.c
index bc503f5..bf51144 100644
--- a/arch/x86/lib/csum-partial_64.c
+++ b/arch/x86/lib/csum-partial_64.c
@@ -136,8 +136,6 @@
(__force u32)sum);
}
-EXPORT_SYMBOL(csum_partial);
-
/*
* this routine is used for miscellaneous IP-like checksums, mainly
* in icmp.c
diff --git a/arch/x86/lib/delay_32.c b/arch/x86/lib/delay_32.c
index 4535e6d..d710f2d 100644
--- a/arch/x86/lib/delay_32.c
+++ b/arch/x86/lib/delay_32.c
@@ -44,13 +44,36 @@
static void delay_tsc(unsigned long loops)
{
unsigned long bclock, now;
+ int cpu;
- preempt_disable(); /* TSC's are per-cpu */
+ preempt_disable();
+ cpu = smp_processor_id();
rdtscl(bclock);
- do {
- rep_nop();
+ for (;;) {
rdtscl(now);
- } while ((now-bclock) < loops);
+ if ((now - bclock) >= loops)
+ break;
+
+ /* Allow RT tasks to run */
+ preempt_enable();
+ rep_nop();
+ preempt_disable();
+
+ /*
+ * It is possible that we moved to another CPU, and
+ * since TSC's are per-cpu we need to calculate
+ * that. The delay must guarantee that we wait "at
+ * least" the amount of time. Being moved to another
+ * CPU could make the wait longer but we just need to
+ * make sure we waited long enough. Rebalance the
+ * counter for this CPU.
+ */
+ if (unlikely(cpu != smp_processor_id())) {
+ loops -= (now - bclock);
+ cpu = smp_processor_id();
+ rdtscl(bclock);
+ }
+ }
preempt_enable();
}
diff --git a/arch/x86/lib/delay_64.c b/arch/x86/lib/delay_64.c
index bbc6105..4c441be 100644
--- a/arch/x86/lib/delay_64.c
+++ b/arch/x86/lib/delay_64.c
@@ -31,14 +31,36 @@
void __delay(unsigned long loops)
{
unsigned bclock, now;
+ int cpu;
- preempt_disable(); /* TSC's are pre-cpu */
+ preempt_disable();
+ cpu = smp_processor_id();
rdtscl(bclock);
- do {
- rep_nop();
+ for (;;) {
rdtscl(now);
+ if ((now - bclock) >= loops)
+ break;
+
+ /* Allow RT tasks to run */
+ preempt_enable();
+ rep_nop();
+ preempt_disable();
+
+ /*
+ * It is possible that we moved to another CPU, and
+ * since TSC's are per-cpu we need to calculate
+ * that. The delay must guarantee that we wait "at
+ * least" the amount of time. Being moved to another
+ * CPU could make the wait longer but we just need to
+ * make sure we waited long enough. Rebalance the
+ * counter for this CPU.
+ */
+ if (unlikely(cpu != smp_processor_id())) {
+ loops -= (now - bclock);
+ cpu = smp_processor_id();
+ rdtscl(bclock);
+ }
}
- while ((now-bclock) < loops);
preempt_enable();
}
EXPORT_SYMBOL(__delay);
diff --git a/arch/x86/math-emu/fpu_entry.c b/arch/x86/math-emu/fpu_entry.c
index 6e38d87..c7b06fe 100644
--- a/arch/x86/math-emu/fpu_entry.c
+++ b/arch/x86/math-emu/fpu_entry.c
@@ -30,6 +30,7 @@
#include <asm/uaccess.h>
#include <asm/desc.h>
#include <asm/user.h>
+#include <asm/i387.h>
#include "fpu_system.h"
#include "fpu_emu.h"
@@ -146,6 +147,13 @@
unsigned long code_limit = 0; /* Initialized to stop compiler warnings */
struct desc_struct code_descriptor;
+ if (!used_math()) {
+ if (init_fpu(current)) {
+ do_group_exit(SIGKILL);
+ return;
+ }
+ }
+
#ifdef RE_ENTRANT_CHECKING
if (emulating) {
printk("ERROR: wm-FPU-emu is not RE-ENTRANT!\n");
@@ -153,11 +161,6 @@
RE_ENTRANT_CHECK_ON;
#endif /* RE_ENTRANT_CHECKING */
- if (!used_math()) {
- finit();
- set_used_math();
- }
-
SETUP_DATA_AREA(arg);
FPU_ORIG_EIP = FPU_EIP;
diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c
index fd7e179..8bcb6f4 100644
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -497,6 +497,11 @@
unsigned long pgd_paddr;
pmd_t *pmd_k;
pte_t *pte_k;
+
+ /* Make sure we are in vmalloc area */
+ if (!(address >= VMALLOC_START && address < VMALLOC_END))
+ return -1;
+
/*
* Synchronize this task's top level page-table
* with the 'reference' page table.
diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c
index de236e4..ec30d10 100644
--- a/arch/x86/mm/init_32.c
+++ b/arch/x86/mm/init_32.c
@@ -438,8 +438,6 @@
{
int i;
- save_pg_dir();
-
/*
* Zap initial low-memory mappings.
*
@@ -663,16 +661,8 @@
test_wp_bit();
cpa_init();
-
- /*
- * Subtle. SMP is doing it's boot stuff late (because it has to
- * fork idle threads) - but it also needs low mappings for the
- * protected-mode entry to work. We zap these entries only after
- * the WP-bit has been tested.
- */
-#ifndef CONFIG_SMP
+ save_pg_dir();
zap_low_mappings();
-#endif
}
#ifdef CONFIG_MEMORY_HOTPLUG
diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index c6d8131..c66aac5 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -206,7 +206,7 @@
pmd_t *last_pmd = pmd + PTRS_PER_PMD;
for (; pmd < last_pmd; pmd++, vaddr += PMD_SIZE) {
- if (!pmd_present(*pmd))
+ if (pmd_none(*pmd))
continue;
if (vaddr < (unsigned long) _text || vaddr > end)
set_pmd(pmd, __pmd(0));
@@ -507,7 +507,7 @@
static void __init early_memtest(unsigned long start, unsigned long end)
{
- unsigned long t_start, t_size;
+ u64 t_start, t_size;
unsigned pattern;
if (!memtest_pattern)
@@ -526,7 +526,7 @@
if (t_start + t_size > end)
t_size = end - t_start;
- printk(KERN_CONT "\n %016lx - %016lx pattern %d",
+ printk(KERN_CONT "\n %016llx - %016llx pattern %d",
t_start, t_start + t_size, pattern);
memtest(t_start, t_size, pattern);
diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c
index 71bb315..2b2bb3f 100644
--- a/arch/x86/mm/ioremap.c
+++ b/arch/x86/mm/ioremap.c
@@ -593,10 +593,11 @@
unsigned long offset;
unsigned int nrpages;
enum fixed_addresses idx;
- unsigned int nesting;
+ int nesting;
nesting = --early_ioremap_nested;
- WARN_ON(nesting < 0);
+ if (WARN_ON(nesting < 0))
+ return;
if (early_ioremap_debug) {
printk(KERN_INFO "early_iounmap(%p, %08lx) [%d]\n", addr,
diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c
index 60adbe2..06b7a1c 100644
--- a/arch/x86/mm/pat.c
+++ b/arch/x86/mm/pat.c
@@ -28,13 +28,13 @@
#ifdef CONFIG_X86_PAT
int __read_mostly pat_wc_enabled = 1;
-void __init pat_disable(char *reason)
+void __cpuinit pat_disable(char *reason)
{
pat_wc_enabled = 0;
printk(KERN_INFO "%s\n", reason);
}
-static int nopat(char *str)
+static int __init nopat(char *str)
{
pat_disable("PAT support disabled.");
return 0;
@@ -151,32 +151,33 @@
unsigned long pat_type;
u8 mtrr_type;
- mtrr_type = mtrr_type_lookup(start, end);
- if (mtrr_type == 0xFF) { /* MTRR not enabled */
- *ret_prot = prot;
- return 0;
- }
- if (mtrr_type == 0xFE) { /* MTRR match error */
- *ret_prot = _PAGE_CACHE_UC;
- return -1;
- }
- if (mtrr_type != MTRR_TYPE_UNCACHABLE &&
- mtrr_type != MTRR_TYPE_WRBACK &&
- mtrr_type != MTRR_TYPE_WRCOMB) { /* MTRR type unhandled */
- *ret_prot = _PAGE_CACHE_UC;
- return -1;
- }
-
pat_type = prot & _PAGE_CACHE_MASK;
prot &= (~_PAGE_CACHE_MASK);
- /* Currently doing intersection by hand. Optimize it later. */
+ /*
+ * We return the PAT request directly for types where PAT takes
+ * precedence with respect to MTRR and for UC_MINUS.
+ * Consistency checks with other PAT requests is done later
+ * while going through memtype list.
+ */
if (pat_type == _PAGE_CACHE_WC) {
*ret_prot = prot | _PAGE_CACHE_WC;
+ return 0;
} else if (pat_type == _PAGE_CACHE_UC_MINUS) {
*ret_prot = prot | _PAGE_CACHE_UC_MINUS;
- } else if (pat_type == _PAGE_CACHE_UC ||
- mtrr_type == MTRR_TYPE_UNCACHABLE) {
+ return 0;
+ } else if (pat_type == _PAGE_CACHE_UC) {
+ *ret_prot = prot | _PAGE_CACHE_UC;
+ return 0;
+ }
+
+ /*
+ * Look for MTRR hint to get the effective type in case where PAT
+ * request is for WB.
+ */
+ mtrr_type = mtrr_type_lookup(start, end);
+
+ if (mtrr_type == MTRR_TYPE_UNCACHABLE) {
*ret_prot = prot | _PAGE_CACHE_UC;
} else if (mtrr_type == MTRR_TYPE_WRCOMB) {
*ret_prot = prot | _PAGE_CACHE_WC;
@@ -233,14 +234,12 @@
if (req_type == -1) {
/*
- * Special case where caller wants to inherit from mtrr or
- * existing pat mapping, defaulting to UC_MINUS in case of
- * no match.
+ * Call mtrr_lookup to get the type hint. This is an
+ * optimization for /dev/mem mmap'ers into WB memory (BIOS
+ * tools and ACPI tools). Use WB request for WB memory and use
+ * UC_MINUS otherwise.
*/
u8 mtrr_type = mtrr_type_lookup(start, end);
- if (mtrr_type == 0xFE) { /* MTRR match error */
- err = -1;
- }
if (mtrr_type == MTRR_TYPE_WRBACK) {
req_type = _PAGE_CACHE_WB;
@@ -555,7 +554,7 @@
"%s:%d /dev/mem ioremap_change_attr failed %s for %Lx-%Lx\n",
current->comm, current->pid,
cattr_name(flags),
- offset, offset + size);
+ offset, (unsigned long long)(offset + size));
return 0;
}
@@ -576,7 +575,7 @@
"%s:%d /dev/mem expected mapping type %s for %Lx-%Lx, got %s\n",
current->comm, current->pid,
cattr_name(want_flags),
- addr, addr + size,
+ addr, (unsigned long long)(addr + size),
cattr_name(flags));
}
}
diff --git a/arch/x86/mm/srat_64.c b/arch/x86/mm/srat_64.c
index 3890234..99649dc 100644
--- a/arch/x86/mm/srat_64.c
+++ b/arch/x86/mm/srat_64.c
@@ -97,36 +97,9 @@
return numa_off || acpi_numa < 0;
}
-/*
- * A lot of BIOS fill in 10 (= no distance) everywhere. This messes
- * up the NUMA heuristics which wants the local node to have a smaller
- * distance than the others.
- * Do some quick checks here and only use the SLIT if it passes.
- */
-static __init int slit_valid(struct acpi_table_slit *slit)
-{
- int i, j;
- int d = slit->locality_count;
- for (i = 0; i < d; i++) {
- for (j = 0; j < d; j++) {
- u8 val = slit->entry[d*i + j];
- if (i == j) {
- if (val != LOCAL_DISTANCE)
- return 0;
- } else if (val <= LOCAL_DISTANCE)
- return 0;
- }
- }
- return 1;
-}
-
/* Callback for SLIT parsing */
void __init acpi_numa_slit_init(struct acpi_table_slit *slit)
{
- if (!slit_valid(slit)) {
- printk(KERN_INFO "ACPI: SLIT table looks invalid. Not used.\n");
- return;
- }
acpi_slit = slit;
}
diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c
index 8545c8a..940185e 100644
--- a/arch/x86/pci/common.c
+++ b/arch/x86/pci/common.c
@@ -302,18 +302,18 @@
},
{
.callback = set_bf_sort,
- .ident = "HP ProLiant DL385 G2",
+ .ident = "HP ProLiant DL360",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "HP"),
- DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL385 G2"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL360"),
},
},
{
.callback = set_bf_sort,
- .ident = "HP ProLiant DL585 G2",
+ .ident = "HP ProLiant DL380",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "HP"),
- DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL585 G2"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL380"),
},
},
#ifdef __i386__
@@ -328,18 +328,18 @@
#endif
{
.callback = set_bf_sort,
- .ident = "HP ProLiant DL385 G2",
+ .ident = "HP ProLiant DL360",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "HP"),
- DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL385 G2"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL360"),
},
},
{
.callback = set_bf_sort,
- .ident = "HP ProLiant DL585 G2",
+ .ident = "HP ProLiant DL380",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "HP"),
- DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL585 G2"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL380"),
},
},
{}
diff --git a/arch/x86/pci/i386.c b/arch/x86/pci/i386.c
index 8af0f0b..10fb308 100644
--- a/arch/x86/pci/i386.c
+++ b/arch/x86/pci/i386.c
@@ -301,15 +301,13 @@
prot = pgprot_val(vma->vm_page_prot);
if (pat_wc_enabled && write_combine)
prot |= _PAGE_CACHE_WC;
- else if (pat_wc_enabled)
+ else if (pat_wc_enabled || boot_cpu_data.x86 > 3)
/*
* ioremap() and ioremap_nocache() defaults to UC MINUS for now.
* To avoid attribute conflicts, request UC MINUS here
* aswell.
*/
prot |= _PAGE_CACHE_UC_MINUS;
- else if (boot_cpu_data.x86 > 3)
- prot |= _PAGE_CACHE_UC;
vma->vm_page_prot = __pgprot(prot);
diff --git a/arch/x86/pci/init.c b/arch/x86/pci/init.c
index e70b9c5..b821f44 100644
--- a/arch/x86/pci/init.c
+++ b/arch/x86/pci/init.c
@@ -15,7 +15,8 @@
pci_mmcfg_early_init();
#ifdef CONFIG_PCI_OLPC
- pci_olpc_init();
+ if (!pci_olpc_init())
+ return 0; /* skip additional checks if it's an XO */
#endif
#ifdef CONFIG_PCI_BIOS
pci_pcbios_init();
diff --git a/arch/x86/pci/irq.c b/arch/x86/pci/irq.c
index 0908fca..ca8df9c 100644
--- a/arch/x86/pci/irq.c
+++ b/arch/x86/pci/irq.c
@@ -621,6 +621,13 @@
*/
device = PCI_DEVICE_ID_VIA_8235;
break;
+ case PCI_DEVICE_ID_VIA_8237:
+ /**
+ * Asus a7v600 bios wrongly reports 8237
+ * as 586-compatible
+ */
+ device = PCI_DEVICE_ID_VIA_8237;
+ break;
}
}
diff --git a/arch/x86/pci/olpc.c b/arch/x86/pci/olpc.c
index 5e76365..e11e9e8 100644
--- a/arch/x86/pci/olpc.c
+++ b/arch/x86/pci/olpc.c
@@ -302,12 +302,13 @@
.write = pci_olpc_write,
};
-void __init pci_olpc_init(void)
+int __init pci_olpc_init(void)
{
if (!machine_is_olpc() || olpc_has_vsa())
- return;
+ return -ENODEV;
printk(KERN_INFO "PCI: Using configuration type OLPC\n");
raw_pci_ops = &pci_olpc_conf;
is_lx = is_geode_lx();
+ return 0;
}
diff --git a/arch/x86/pci/pci.h b/arch/x86/pci/pci.h
index f3972b1..720c4c5 100644
--- a/arch/x86/pci/pci.h
+++ b/arch/x86/pci/pci.h
@@ -101,7 +101,7 @@
extern int pci_direct_probe(void);
extern void pci_direct_init(int type);
extern void pci_pcbios_init(void);
-extern void pci_olpc_init(void);
+extern int pci_olpc_init(void);
/* pci-mmconfig.c */
diff --git a/arch/x86/vdso/vclock_gettime.c b/arch/x86/vdso/vclock_gettime.c
index 23476c2..efa2ba7 100644
--- a/arch/x86/vdso/vclock_gettime.c
+++ b/arch/x86/vdso/vclock_gettime.c
@@ -106,9 +106,9 @@
do_realtime((struct timespec *)tv);
tv->tv_usec /= 1000;
if (unlikely(tz != NULL)) {
- /* This relies on gcc inlining the memcpy. We'll notice
- if it ever fails to do so. */
- memcpy(tz, >od->sys_tz, sizeof(struct timezone));
+ /* Avoid memcpy. Some old compilers fail to inline it */
+ tz->tz_minuteswest = gtod->sys_tz.tz_minuteswest;
+ tz->tz_dsttime = gtod->sys_tz.tz_dsttime;
}
return 0;
}
diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c
index 126766d..3525ef5 100644
--- a/arch/x86/xen/mmu.c
+++ b/arch/x86/xen/mmu.c
@@ -60,7 +60,7 @@
{
unsigned int level;
pte_t *pte = lookup_address(address, &level);
- unsigned offset = address & PAGE_MASK;
+ unsigned offset = address & ~PAGE_MASK;
BUG_ON(pte == NULL);
diff --git a/arch/x86/xen/time.c b/arch/x86/xen/time.c
index c39e1a5..52b2e38 100644
--- a/arch/x86/xen/time.c
+++ b/arch/x86/xen/time.c
@@ -12,6 +12,7 @@
#include <linux/clocksource.h>
#include <linux/clockchips.h>
#include <linux/kernel_stat.h>
+#include <linux/math64.h>
#include <asm/xen/hypervisor.h>
#include <asm/xen/hypercall.h>
@@ -150,11 +151,7 @@
if (stolen < 0)
stolen = 0;
- ticks = 0;
- while (stolen >= NS_PER_TICK) {
- ticks++;
- stolen -= NS_PER_TICK;
- }
+ ticks = iter_div_u64_rem(stolen, NS_PER_TICK, &stolen);
__get_cpu_var(residual_stolen) = stolen;
account_steal_time(NULL, ticks);
@@ -166,11 +163,7 @@
if (blocked < 0)
blocked = 0;
- ticks = 0;
- while (blocked >= NS_PER_TICK) {
- ticks++;
- blocked -= NS_PER_TICK;
- }
+ ticks = iter_div_u64_rem(blocked, NS_PER_TICK, &blocked);
__get_cpu_var(residual_blocked) = blocked;
account_steal_time(idle_task(smp_processor_id()), ticks);
}
diff --git a/arch/xtensa/kernel/init_task.c b/arch/xtensa/kernel/init_task.c
index 021b4f4..3df469d 100644
--- a/arch/xtensa/kernel/init_task.c
+++ b/arch/xtensa/kernel/init_task.c
@@ -22,7 +22,6 @@
#include <asm/uaccess.h>
static struct fs_struct init_fs = INIT_FS;
-static struct files_struct init_files = INIT_FILES;
static struct signal_struct init_signals = INIT_SIGNALS(init_signals);
static struct sighand_struct init_sighand = INIT_SIGHAND(init_sighand);
struct mm_struct init_mm = INIT_MM(init_mm);
diff --git a/block/blk-core.c b/block/blk-core.c
index 2987fe4..1905aab 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -482,6 +482,7 @@
kobject_init(&q->kobj, &blk_queue_ktype);
mutex_init(&q->sysfs_lock);
+ spin_lock_init(&q->__queue_lock);
return q;
}
@@ -544,10 +545,8 @@
* if caller didn't supply a lock, they get per-queue locking with
* our embedded lock
*/
- if (!lock) {
- spin_lock_init(&q->__queue_lock);
+ if (!lock)
lock = &q->__queue_lock;
- }
q->request_fn = rfn;
q->prep_rq_fn = NULL;
@@ -807,35 +806,32 @@
rq = get_request(q, rw_flags, bio, GFP_NOIO);
while (!rq) {
DEFINE_WAIT(wait);
+ struct io_context *ioc;
struct request_list *rl = &q->rq;
prepare_to_wait_exclusive(&rl->wait[rw], &wait,
TASK_UNINTERRUPTIBLE);
- rq = get_request(q, rw_flags, bio, GFP_NOIO);
+ blk_add_trace_generic(q, bio, rw, BLK_TA_SLEEPRQ);
- if (!rq) {
- struct io_context *ioc;
+ __generic_unplug_device(q);
+ spin_unlock_irq(q->queue_lock);
+ io_schedule();
- blk_add_trace_generic(q, bio, rw, BLK_TA_SLEEPRQ);
+ /*
+ * After sleeping, we become a "batching" process and
+ * will be able to allocate at least one request, and
+ * up to a big batch of them for a small period time.
+ * See ioc_batching, ioc_set_batching
+ */
+ ioc = current_io_context(GFP_NOIO, q->node);
+ ioc_set_batching(q, ioc);
- __generic_unplug_device(q);
- spin_unlock_irq(q->queue_lock);
- io_schedule();
-
- /*
- * After sleeping, we become a "batching" process and
- * will be able to allocate at least one request, and
- * up to a big batch of them for a small period time.
- * See ioc_batching, ioc_set_batching
- */
- ioc = current_io_context(GFP_NOIO, q->node);
- ioc_set_batching(q, ioc);
-
- spin_lock_irq(q->queue_lock);
- }
+ spin_lock_irq(q->queue_lock);
finish_wait(&rl->wait[rw], &wait);
- }
+
+ rq = get_request(q, rw_flags, bio, GFP_NOIO);
+ };
return rq;
}
diff --git a/block/blk-settings.c b/block/blk-settings.c
index bb93d4c..8dd8641 100644
--- a/block/blk-settings.c
+++ b/block/blk-settings.c
@@ -286,8 +286,14 @@
t->max_hw_segments = min(t->max_hw_segments, b->max_hw_segments);
t->max_segment_size = min(t->max_segment_size, b->max_segment_size);
t->hardsect_size = max(t->hardsect_size, b->hardsect_size);
- if (!test_bit(QUEUE_FLAG_CLUSTER, &b->queue_flags))
+ if (!t->queue_lock)
+ WARN_ON_ONCE(1);
+ else if (!test_bit(QUEUE_FLAG_CLUSTER, &b->queue_flags)) {
+ unsigned long flags;
+ spin_lock_irqsave(t->queue_lock, flags);
queue_flag_clear(QUEUE_FLAG_CLUSTER, t);
+ spin_unlock_irqrestore(t->queue_lock, flags);
+ }
}
EXPORT_SYMBOL(blk_queue_stack_limits);
diff --git a/block/blktrace.c b/block/blktrace.c
index 568588c..8d3a277 100644
--- a/block/blktrace.c
+++ b/block/blktrace.c
@@ -75,6 +75,24 @@
local_irq_restore(flags);
}
+void __trace_note_message(struct blk_trace *bt, const char *fmt, ...)
+{
+ int n;
+ va_list args;
+ unsigned long flags;
+ char *buf;
+
+ local_irq_save(flags);
+ buf = per_cpu_ptr(bt->msg_data, smp_processor_id());
+ va_start(args, fmt);
+ n = vscnprintf(buf, BLK_TN_MAX_MSG, fmt, args);
+ va_end(args);
+
+ trace_note(bt, 0, BLK_TN_MESSAGE, buf, n);
+ local_irq_restore(flags);
+}
+EXPORT_SYMBOL_GPL(__trace_note_message);
+
static int act_log_check(struct blk_trace *bt, u32 what, sector_t sector,
pid_t pid)
{
@@ -141,10 +159,7 @@
/*
* A word about the locking here - we disable interrupts to reserve
* some space in the relay per-cpu buffer, to prevent an irq
- * from coming in and stepping on our toes. Once reserved, it's
- * enough to get preemption disabled to prevent read of this data
- * before we are through filling it. get_cpu()/put_cpu() does this
- * for us
+ * from coming in and stepping on our toes.
*/
local_irq_save(flags);
@@ -232,6 +247,7 @@
debugfs_remove(bt->dropped_file);
blk_remove_tree(bt->dir);
free_percpu(bt->sequence);
+ free_percpu(bt->msg_data);
kfree(bt);
}
@@ -346,6 +362,10 @@
if (!bt->sequence)
goto err;
+ bt->msg_data = __alloc_percpu(BLK_TN_MAX_MSG);
+ if (!bt->msg_data)
+ goto err;
+
ret = -ENOENT;
dir = blk_create_tree(buts->name);
if (!dir)
@@ -392,6 +412,7 @@
if (bt->dropped_file)
debugfs_remove(bt->dropped_file);
free_percpu(bt->sequence);
+ free_percpu(bt->msg_data);
if (bt->rchan)
relay_close(bt->rchan);
kfree(bt);
@@ -476,7 +497,7 @@
switch (cmd) {
case BLKTRACESETUP:
- strcpy(b, bdevname(bdev, b));
+ bdevname(bdev, b);
ret = blk_trace_setup(q, b, bdev->bd_dev, arg);
break;
case BLKTRACESTART:
diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c
index b399c62..d01b411 100644
--- a/block/cfq-iosched.c
+++ b/block/cfq-iosched.c
@@ -124,6 +124,8 @@
struct cfq_queue {
/* reference count */
atomic_t ref;
+ /* various state flags, see below */
+ unsigned int flags;
/* parent cfq_data */
struct cfq_data *cfqd;
/* service_tree member */
@@ -138,14 +140,14 @@
int queued[2];
/* currently allocated requests */
int allocated[2];
- /* pending metadata requests */
- int meta_pending;
/* fifo list of requests in sort_list */
struct list_head fifo;
unsigned long slice_end;
long slice_resid;
+ /* pending metadata requests */
+ int meta_pending;
/* number of requests that are on the dispatch list or inside driver */
int dispatched;
@@ -153,8 +155,6 @@
unsigned short ioprio, org_ioprio;
unsigned short ioprio_class, org_ioprio_class;
- /* various state flags, see below */
- unsigned int flags;
};
enum cfqq_state_flags {
@@ -1142,6 +1142,9 @@
kmem_cache_free(cfq_pool, cfqq);
}
+/*
+ * Must always be called with the rcu_read_lock() held
+ */
static void
__call_for_each_cic(struct io_context *ioc,
void (*func)(struct io_context *, struct cfq_io_context *))
@@ -1197,6 +1200,11 @@
cfq_cic_free(cic);
}
+/*
+ * Must be called with rcu_read_lock() held or preemption otherwise disabled.
+ * Only two callers of this - ->dtor() which is called with the rcu_read_lock(),
+ * and ->trim() which is called with the task lock held
+ */
static void cfq_free_io_context(struct io_context *ioc)
{
/*
@@ -1502,20 +1510,24 @@
cfq_cic_lookup(struct cfq_data *cfqd, struct io_context *ioc)
{
struct cfq_io_context *cic;
+ unsigned long flags;
void *k;
if (unlikely(!ioc))
return NULL;
+ rcu_read_lock();
+
/*
* we maintain a last-hit cache, to avoid browsing over the tree
*/
cic = rcu_dereference(ioc->ioc_data);
- if (cic && cic->key == cfqd)
+ if (cic && cic->key == cfqd) {
+ rcu_read_unlock();
return cic;
+ }
do {
- rcu_read_lock();
cic = radix_tree_lookup(&ioc->radix_root, (unsigned long) cfqd);
rcu_read_unlock();
if (!cic)
@@ -1524,10 +1536,13 @@
k = cic->key;
if (unlikely(!k)) {
cfq_drop_dead_cic(cfqd, ioc, cic);
+ rcu_read_lock();
continue;
}
+ spin_lock_irqsave(&ioc->lock, flags);
rcu_assign_pointer(ioc->ioc_data, cic);
+ spin_unlock_irqrestore(&ioc->lock, flags);
break;
} while (1);
@@ -2134,6 +2149,10 @@
static void cfq_slab_kill(void)
{
+ /*
+ * Caller already ensured that pending RCU callbacks are completed,
+ * so we should have no busy allocations at this point.
+ */
if (cfq_pool)
kmem_cache_destroy(cfq_pool);
if (cfq_ioc_pool)
@@ -2292,6 +2311,11 @@
ioc_gone = &all_gone;
/* ioc_gone's update must be visible before reading ioc_count */
smp_wmb();
+
+ /*
+ * this also protects us from entering cfq_slab_kill() with
+ * pending RCU callbacks
+ */
if (elv_ioc_count_read(ioc_count))
wait_for_completion(ioc_gone);
cfq_slab_kill();
diff --git a/block/compat_ioctl.c b/block/compat_ioctl.c
index c70d0b6..c23177e 100644
--- a/block/compat_ioctl.c
+++ b/block/compat_ioctl.c
@@ -555,7 +555,7 @@
if (copy_from_user(&cbuts, arg, sizeof(cbuts)))
return -EFAULT;
- strcpy(b, bdevname(bdev, b));
+ bdevname(bdev, b);
buts = (struct blk_user_trace_setup) {
.act_mask = cbuts.act_mask,
diff --git a/block/elevator.c b/block/elevator.c
index 980f8ae..902dd13 100644
--- a/block/elevator.c
+++ b/block/elevator.c
@@ -1110,6 +1110,8 @@
queue_flag_clear(QUEUE_FLAG_ELVSWITCH, q);
spin_unlock_irq(q->queue_lock);
+ blk_add_trace_msg(q, "elv switch: %s", e->elevator_type->elevator_name);
+
return 1;
fail_register:
diff --git a/block/genhd.c b/block/genhd.c
index fda9c7a..b922d48 100644
--- a/block/genhd.c
+++ b/block/genhd.c
@@ -653,15 +653,21 @@
EXPORT_SYMBOL_GPL(genhd_media_change_notify);
#endif /* 0 */
-dev_t blk_lookup_devt(const char *name)
+dev_t blk_lookup_devt(const char *name, int part)
{
struct device *dev;
dev_t devt = MKDEV(0, 0);
mutex_lock(&block_class_lock);
list_for_each_entry(dev, &block_class.devices, node) {
+ if (dev->type != &disk_type)
+ continue;
if (strcmp(dev->bus_id, name) == 0) {
- devt = dev->devt;
+ struct gendisk *disk = dev_to_disk(dev);
+
+ if (part < disk->minors)
+ devt = MKDEV(MAJOR(dev->devt),
+ MINOR(dev->devt) + part);
break;
}
}
@@ -669,7 +675,6 @@
return devt;
}
-
EXPORT_SYMBOL(blk_lookup_devt);
struct gendisk *alloc_disk(int minors)
diff --git a/crypto/cts.c b/crypto/cts.c
index c4e70bf..ccf9c5d 100644
--- a/crypto/cts.c
+++ b/crypto/cts.c
@@ -89,6 +89,9 @@
if (lastn < 0)
return -EINVAL;
+ sg_init_table(sgsrc, 1);
+ sg_init_table(sgdst, 1);
+
memset(s, 0, sizeof(s));
scatterwalk_map_and_copy(s, src, offset, nbytes, 0);
@@ -172,6 +175,9 @@
if (lastn < 0)
return -EINVAL;
+ sg_init_table(sgsrc, 1);
+ sg_init_table(sgdst, 1);
+
scatterwalk_map_and_copy(s, src, offset, nbytes, 0);
lcldesc.tfm = ctx->child;
diff --git a/drivers/acpi/bay.c b/drivers/acpi/bay.c
index d2fc941..26038c2 100644
--- a/drivers/acpi/bay.c
+++ b/drivers/acpi/bay.c
@@ -301,16 +301,20 @@
*/
pdev->dev.uevent_suppress = 0;
- if (acpi_bay_add_fs(new_bay)) {
- platform_device_unregister(new_bay->pdev);
- goto bay_add_err;
- }
-
/* register for events on this device */
status = acpi_install_notify_handler(handle, ACPI_SYSTEM_NOTIFY,
bay_notify, new_bay);
if (ACPI_FAILURE(status)) {
- printk(KERN_ERR PREFIX "Error installing bay notify handler\n");
+ printk(KERN_INFO PREFIX "Error installing bay notify handler\n");
+ platform_device_unregister(new_bay->pdev);
+ goto bay_add_err;
+ }
+
+ if (acpi_bay_add_fs(new_bay)) {
+ acpi_remove_notify_handler(handle, ACPI_SYSTEM_NOTIFY,
+ bay_notify);
+ platform_device_unregister(new_bay->pdev);
+ goto bay_add_err;
}
/* if we are on a dock station, we should register for dock
diff --git a/drivers/acpi/dispatcher/dsfield.c b/drivers/acpi/dispatcher/dsfield.c
index c780783..f988a5e 100644
--- a/drivers/acpi/dispatcher/dsfield.c
+++ b/drivers/acpi/dispatcher/dsfield.c
@@ -450,10 +450,6 @@
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
- if (!arg) {
- return_ACPI_STATUS(AE_AML_NO_OPERAND);
- }
-
/* Creating new namespace node(s), should not already exist */
flags = ACPI_NS_NO_UPSEARCH | ACPI_NS_DONT_OPEN_SCOPE |
@@ -467,6 +463,7 @@
/*
* Walk the list of entries in the field_list
+ * Note: field_list can be of zero length. In this case, Arg will be NULL.
*/
while (arg) {
/*
diff --git a/drivers/acpi/dispatcher/dsmethod.c b/drivers/acpi/dispatcher/dsmethod.c
index e48a3ea..2509809 100644
--- a/drivers/acpi/dispatcher/dsmethod.c
+++ b/drivers/acpi/dispatcher/dsmethod.c
@@ -565,7 +565,7 @@
acpi_os_release_mutex(method_desc->method.
mutex->mutex.os_mutex);
- method_desc->method.mutex->mutex.thread_id = 0;
+ method_desc->method.mutex->mutex.thread_id = NULL;
}
}
diff --git a/drivers/acpi/dock.c b/drivers/acpi/dock.c
index fa44fb9..96c542f 100644
--- a/drivers/acpi/dock.c
+++ b/drivers/acpi/dock.c
@@ -834,7 +834,7 @@
goto dock_add_err;
}
- printk(KERN_INFO PREFIX "%s \n", ACPI_DOCK_DRIVER_DESCRIPTION);
+ printk(KERN_INFO PREFIX "%s\n", ACPI_DOCK_DRIVER_DESCRIPTION);
return 0;
diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c
index 0924992..5622aee 100644
--- a/drivers/acpi/ec.c
+++ b/drivers/acpi/ec.c
@@ -194,7 +194,7 @@
while (time_before(jiffies, delay)) {
if (acpi_ec_check_status(ec, event))
return 0;
- udelay(ACPI_EC_UDELAY);
+ msleep(1);
}
}
pr_err(PREFIX "acpi_ec_wait timeout, status = 0x%2.2x, event = %s\n",
diff --git a/drivers/acpi/executer/exconfig.c b/drivers/acpi/executer/exconfig.c
index 24da921..39d7421 100644
--- a/drivers/acpi/executer/exconfig.c
+++ b/drivers/acpi/executer/exconfig.c
@@ -375,9 +375,15 @@
goto cleanup;
}
+ /*
+ * Add the table to the namespace.
+ *
+ * Note: We load the table objects relative to the root of the namespace.
+ * This appears to go against the ACPI specification, but we do it for
+ * compatibility with other ACPI implementations.
+ */
status =
- acpi_ex_add_table(table_index, walk_state->scope_info->scope.node,
- &ddb_handle);
+ acpi_ex_add_table(table_index, acpi_gbl_root_node, &ddb_handle);
if (ACPI_FAILURE(status)) {
/* On error, table_ptr was deallocated above */
diff --git a/drivers/acpi/executer/exmutex.c b/drivers/acpi/executer/exmutex.c
index c873ab4..a8bf3d7 100644
--- a/drivers/acpi/executer/exmutex.c
+++ b/drivers/acpi/executer/exmutex.c
@@ -326,7 +326,7 @@
/* Clear mutex info */
- obj_desc->mutex.thread_id = 0;
+ obj_desc->mutex.thread_id = NULL;
return_ACPI_STATUS(status);
}
@@ -463,7 +463,7 @@
/* Mark mutex unowned */
obj_desc->mutex.owner_thread = NULL;
- obj_desc->mutex.thread_id = 0;
+ obj_desc->mutex.thread_id = NULL;
/* Update Thread sync_level (Last mutex is the important one) */
diff --git a/drivers/acpi/glue.c b/drivers/acpi/glue.c
index 06f8634..2808dc6 100644
--- a/drivers/acpi/glue.c
+++ b/drivers/acpi/glue.c
@@ -272,6 +272,12 @@
static inline void rtc_wake_setup(void)
{
acpi_install_fixed_event_handler(ACPI_EVENT_RTC, rtc_handler, NULL);
+ /*
+ * After the RTC handler is installed, the Fixed_RTC event should
+ * be disabled. Only when the RTC alarm is set will it be enabled.
+ */
+ acpi_clear_event(ACPI_EVENT_RTC);
+ acpi_disable_event(ACPI_EVENT_RTC, 0);
}
static void rtc_wake_on(struct device *dev)
diff --git a/drivers/acpi/hardware/hwsleep.c b/drivers/acpi/hardware/hwsleep.c
index d9937e0..dba3cfb 100644
--- a/drivers/acpi/hardware/hwsleep.c
+++ b/drivers/acpi/hardware/hwsleep.c
@@ -223,15 +223,17 @@
break;
}
- /* Set the system indicators to show the desired sleep state. */
-
+ /*
+ * Set the system indicators to show the desired sleep state.
+ * _SST is an optional method (return no error if not found)
+ */
status = acpi_evaluate_object(NULL, METHOD_NAME__SST, &arg_list, NULL);
if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
ACPI_EXCEPTION((AE_INFO, status,
"While executing method _SST"));
}
- return_ACPI_STATUS(status);
+ return_ACPI_STATUS(AE_OK);
}
ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state_prep)
diff --git a/drivers/acpi/numa.c b/drivers/acpi/numa.c
index 5d59cb3..658e5f3 100644
--- a/drivers/acpi/numa.c
+++ b/drivers/acpi/numa.c
@@ -140,19 +140,42 @@
}
}
+/*
+ * A lot of BIOS fill in 10 (= no distance) everywhere. This messes
+ * up the NUMA heuristics which wants the local node to have a smaller
+ * distance than the others.
+ * Do some quick checks here and only use the SLIT if it passes.
+ */
+static __init int slit_valid(struct acpi_table_slit *slit)
+{
+ int i, j;
+ int d = slit->locality_count;
+ for (i = 0; i < d; i++) {
+ for (j = 0; j < d; j++) {
+ u8 val = slit->entry[d*i + j];
+ if (i == j) {
+ if (val != LOCAL_DISTANCE)
+ return 0;
+ } else if (val <= LOCAL_DISTANCE)
+ return 0;
+ }
+ }
+ return 1;
+}
+
static int __init acpi_parse_slit(struct acpi_table_header *table)
{
struct acpi_table_slit *slit;
- u32 localities;
if (!table)
return -EINVAL;
slit = (struct acpi_table_slit *)table;
- /* downcast just for %llu vs %lu for i386/ia64 */
- localities = (u32) slit->locality_count;
-
+ if (!slit_valid(slit)) {
+ printk(KERN_INFO "ACPI: SLIT table looks invalid. Not used.\n");
+ return -EINVAL;
+ }
acpi_numa_slit_init(slit);
return 0;
diff --git a/drivers/acpi/parser/psargs.c b/drivers/acpi/parser/psargs.c
index f1e8bf6..e944637 100644
--- a/drivers/acpi/parser/psargs.c
+++ b/drivers/acpi/parser/psargs.c
@@ -268,7 +268,7 @@
*/
if (ACPI_SUCCESS(status) &&
possible_method_call && (node->type == ACPI_TYPE_METHOD)) {
- if (walk_state->op->common.aml_opcode == AML_UNLOAD_OP) {
+ if (walk_state->opcode == AML_UNLOAD_OP) {
/*
* acpi_ps_get_next_namestring has increased the AML pointer,
* so we need to restore the saved AML pointer for method call.
@@ -691,7 +691,7 @@
/* To support super_name arg of Unload */
- if (walk_state->op->common.aml_opcode == AML_UNLOAD_OP) {
+ if (walk_state->opcode == AML_UNLOAD_OP) {
status =
acpi_ps_get_next_namepath(walk_state,
parser_state, arg,
diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c
index 386e5aa..9dd0fa9 100644
--- a/drivers/acpi/processor_core.c
+++ b/drivers/acpi/processor_core.c
@@ -86,7 +86,6 @@
static void acpi_processor_notify(acpi_handle handle, u32 event, void *data);
static acpi_status acpi_processor_hotadd_init(acpi_handle handle, int *p_cpu);
static int acpi_processor_handle_eject(struct acpi_processor *pr);
-extern int acpi_processor_tstate_has_changed(struct acpi_processor *pr);
static const struct acpi_device_id processor_device_ids[] = {
diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index 2dd2c1f..556ee15 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -1669,6 +1669,7 @@
return -EINVAL;
}
+ dev->cpu = pr->id;
for (i = 0; i < CPUIDLE_STATE_MAX; i++) {
dev->states[i].name[0] = '\0';
dev->states[i].desc[0] = '\0';
@@ -1738,7 +1739,7 @@
int acpi_processor_cst_has_changed(struct acpi_processor *pr)
{
- int ret;
+ int ret = 0;
if (boot_option_idle_override)
return 0;
@@ -1756,8 +1757,10 @@
cpuidle_pause_and_lock();
cpuidle_disable_device(&pr->power.dev);
acpi_processor_get_power_info(pr);
- acpi_processor_setup_cpuidle(pr);
- ret = cpuidle_enable_device(&pr->power.dev);
+ if (pr->flags.power) {
+ acpi_processor_setup_cpuidle(pr);
+ ret = cpuidle_enable_device(&pr->power.dev);
+ }
cpuidle_resume_and_unlock();
return ret;
@@ -1813,7 +1816,6 @@
if (pr->flags.power) {
#ifdef CONFIG_CPU_IDLE
acpi_processor_setup_cpuidle(pr);
- pr->power.dev.cpu = pr->id;
if (cpuidle_register_device(&pr->power.dev))
return -EIO;
#endif
@@ -1850,8 +1852,7 @@
return 0;
#ifdef CONFIG_CPU_IDLE
- if (pr->flags.power)
- cpuidle_unregister_device(&pr->power.dev);
+ cpuidle_unregister_device(&pr->power.dev);
#endif
pr->flags.power_setup_done = 0;
diff --git a/drivers/acpi/sleep/proc.c b/drivers/acpi/sleep/proc.c
index 8a5fe87..224c57c 100644
--- a/drivers/acpi/sleep/proc.c
+++ b/drivers/acpi/sleep/proc.c
@@ -495,6 +495,12 @@
acpi_root_dir, &acpi_system_alarm_fops);
acpi_install_fixed_event_handler(ACPI_EVENT_RTC, rtc_handler, NULL);
+ /*
+ * Disable the RTC event after installing RTC handler.
+ * Only when RTC alarm is set will it be enabled.
+ */
+ acpi_clear_event(ACPI_EVENT_RTC);
+ acpi_disable_event(ACPI_EVENT_RTC, 0);
#endif /* HAVE_ACPI_LEGACY_ALARM */
/* 'wakeup device' [R/W] */
diff --git a/drivers/acpi/system.c b/drivers/acpi/system.c
index 769f248..5bd2dec 100644
--- a/drivers/acpi/system.c
+++ b/drivers/acpi/system.c
@@ -77,7 +77,6 @@
container_of(bin_attr, struct acpi_table_attr, attr);
struct acpi_table_header *table_header = NULL;
acpi_status status;
- ssize_t ret_count = count;
status =
acpi_get_table(table_attr->name, table_attr->instance,
@@ -85,18 +84,8 @@
if (ACPI_FAILURE(status))
return -ENODEV;
- if (offset >= table_header->length) {
- ret_count = 0;
- goto end;
- }
-
- if (offset + ret_count > table_header->length)
- ret_count = table_header->length - offset;
-
- memcpy(buf, ((char *)table_header) + offset, ret_count);
-
- end:
- return ret_count;
+ return memory_read_from_buffer(buf, count, &offset,
+ table_header, table_header->length);
}
static void acpi_table_attr_init(struct acpi_table_attr *table_attr,
diff --git a/drivers/acpi/tables/tbinstal.c b/drivers/acpi/tables/tbinstal.c
index 402f93e..5336ce8 100644
--- a/drivers/acpi/tables/tbinstal.c
+++ b/drivers/acpi/tables/tbinstal.c
@@ -123,24 +123,13 @@
}
}
- /* The table must be either an SSDT or a PSDT or an OEMx */
-
- if (!ACPI_COMPARE_NAME(table_desc->pointer->signature, ACPI_SIG_PSDT)&&
- !ACPI_COMPARE_NAME(table_desc->pointer->signature, ACPI_SIG_SSDT)&&
- strncmp(table_desc->pointer->signature, "OEM", 3)) {
- /* Check for a printable name */
- if (acpi_ut_valid_acpi_name(
- *(u32 *) table_desc->pointer->signature)) {
- ACPI_ERROR((AE_INFO, "Table has invalid signature "
- "[%4.4s], must be SSDT or PSDT",
- table_desc->pointer->signature));
- } else {
- ACPI_ERROR((AE_INFO, "Table has invalid signature "
- "(0x%8.8X), must be SSDT or PSDT",
- *(u32 *) table_desc->pointer->signature));
- }
- return_ACPI_STATUS(AE_BAD_SIGNATURE);
- }
+ /*
+ * Originally, we checked the table signature for "SSDT" or "PSDT" here.
+ * Next, we added support for OEMx tables, signature "OEM".
+ * Valid tables were encountered with a null signature, so we've just
+ * given up on validating the signature, since it seems to be a waste
+ * of code. The original code was removed (05/2008).
+ */
(void)acpi_ut_acquire_mutex(ACPI_MTX_TABLES);
diff --git a/drivers/acpi/tables/tbxface.c b/drivers/acpi/tables/tbxface.c
index fb57b93..0e31960 100644
--- a/drivers/acpi/tables/tbxface.c
+++ b/drivers/acpi/tables/tbxface.c
@@ -540,7 +540,7 @@
acpi_tb_print_table_header(0, table);
if (no_auto_ssdt == 0) {
- printk(KERN_WARNING "ACPI: DSDT override uses original SSDTs unless \"acpi_no_auto_ssdt\"");
+ printk(KERN_WARNING "ACPI: DSDT override uses original SSDTs unless \"acpi_no_auto_ssdt\"\n");
}
}
diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c
index 504385b..84c795f 100644
--- a/drivers/acpi/thermal.c
+++ b/drivers/acpi/thermal.c
@@ -364,10 +364,17 @@
if (flag & ACPI_TRIPS_CRITICAL) {
status = acpi_evaluate_integer(tz->device->handle,
"_CRT", NULL, &tz->trips.critical.temperature);
- if (ACPI_FAILURE(status)) {
+ /*
+ * Treat freezing temperatures as invalid as well; some
+ * BIOSes return really low values and cause reboots at startup.
+ * Below zero (Celcius) values clearly aren't right for sure..
+ * ... so lets discard those as invalid.
+ */
+ if (ACPI_FAILURE(status) ||
+ tz->trips.critical.temperature <= 2732) {
tz->trips.critical.flags.valid = 0;
ACPI_EXCEPTION((AE_INFO, status,
- "No critical threshold"));
+ "No or invalid critical threshold"));
return -ENODEV;
} else {
tz->trips.critical.flags.valid = 1;
diff --git a/drivers/acpi/utilities/utmisc.c b/drivers/acpi/utilities/utmisc.c
index e4ba719..1f057b7 100644
--- a/drivers/acpi/utilities/utmisc.c
+++ b/drivers/acpi/utilities/utmisc.c
@@ -1048,6 +1048,7 @@
va_start(args, format);
acpi_os_vprintf(format, args);
acpi_os_printf(" [%X]\n", ACPI_CA_VERSION);
+ va_end(args);
}
EXPORT_SYMBOL(acpi_ut_exception);
@@ -1063,7 +1064,6 @@
acpi_os_vprintf(format, args);
acpi_os_printf(" [%X]\n", ACPI_CA_VERSION);
va_end(args);
- va_end(args);
}
void ACPI_INTERNAL_VAR_XFACE
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 97f83fb..966ab40 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -89,6 +89,7 @@
board_ahci_sb600 = 3,
board_ahci_mv = 4,
board_ahci_sb700 = 5,
+ board_ahci_mcp65 = 6,
/* global controller registers */
HOST_CAP = 0x00, /* host capabilities */
@@ -190,6 +191,7 @@
AHCI_HFLAG_NO_PMP = (1 << 6), /* no PMP */
AHCI_HFLAG_NO_HOTPLUG = (1 << 7), /* ignore PxSERR.DIAG.N */
AHCI_HFLAG_SECT255 = (1 << 8), /* max 255 sectors */
+ AHCI_HFLAG_YES_NCQ = (1 << 9), /* force NCQ cap on */
/* ap->flags bits */
@@ -253,6 +255,8 @@
static void ahci_pmp_detach(struct ata_port *ap);
static int ahci_softreset(struct ata_link *link, unsigned int *class,
unsigned long deadline);
+static int ahci_sb600_softreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline);
static int ahci_hardreset(struct ata_link *link, unsigned int *class,
unsigned long deadline);
static int ahci_vt8251_hardreset(struct ata_link *link, unsigned int *class,
@@ -329,6 +333,12 @@
.hardreset = ahci_p5wdh_hardreset,
};
+static struct ata_port_operations ahci_sb600_ops = {
+ .inherits = &ahci_ops,
+ .softreset = ahci_sb600_softreset,
+ .pmp_softreset = ahci_sb600_softreset,
+};
+
#define AHCI_HFLAGS(flags) .private_data = (void *)(flags)
static const struct ata_port_info ahci_port_info[] = {
@@ -359,11 +369,11 @@
{
AHCI_HFLAGS (AHCI_HFLAG_IGN_SERR_INTERNAL |
AHCI_HFLAG_32BIT_ONLY | AHCI_HFLAG_NO_MSI |
- AHCI_HFLAG_SECT255 | AHCI_HFLAG_NO_PMP),
+ AHCI_HFLAG_SECT255),
.flags = AHCI_FLAG_COMMON,
.pio_mask = 0x1f, /* pio0-4 */
.udma_mask = ATA_UDMA6,
- .port_ops = &ahci_ops,
+ .port_ops = &ahci_sb600_ops,
},
/* board_ahci_mv */
{
@@ -377,8 +387,15 @@
},
/* board_ahci_sb700 */
{
- AHCI_HFLAGS (AHCI_HFLAG_IGN_SERR_INTERNAL |
- AHCI_HFLAG_NO_PMP),
+ AHCI_HFLAGS (AHCI_HFLAG_IGN_SERR_INTERNAL),
+ .flags = AHCI_FLAG_COMMON,
+ .pio_mask = 0x1f, /* pio0-4 */
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &ahci_sb600_ops,
+ },
+ /* board_ahci_mcp65 */
+ {
+ AHCI_HFLAGS (AHCI_HFLAG_YES_NCQ),
.flags = AHCI_FLAG_COMMON,
.pio_mask = 0x1f, /* pio0-4 */
.udma_mask = ATA_UDMA6,
@@ -438,14 +455,14 @@
{ PCI_VDEVICE(VIA, 0x6287), board_ahci_vt8251 }, /* VIA VT8251 */
/* NVIDIA */
- { PCI_VDEVICE(NVIDIA, 0x044c), board_ahci }, /* MCP65 */
- { PCI_VDEVICE(NVIDIA, 0x044d), board_ahci }, /* MCP65 */
- { PCI_VDEVICE(NVIDIA, 0x044e), board_ahci }, /* MCP65 */
- { PCI_VDEVICE(NVIDIA, 0x044f), board_ahci }, /* MCP65 */
- { PCI_VDEVICE(NVIDIA, 0x045c), board_ahci }, /* MCP65 */
- { PCI_VDEVICE(NVIDIA, 0x045d), board_ahci }, /* MCP65 */
- { PCI_VDEVICE(NVIDIA, 0x045e), board_ahci }, /* MCP65 */
- { PCI_VDEVICE(NVIDIA, 0x045f), board_ahci }, /* MCP65 */
+ { PCI_VDEVICE(NVIDIA, 0x044c), board_ahci_mcp65 }, /* MCP65 */
+ { PCI_VDEVICE(NVIDIA, 0x044d), board_ahci_mcp65 }, /* MCP65 */
+ { PCI_VDEVICE(NVIDIA, 0x044e), board_ahci_mcp65 }, /* MCP65 */
+ { PCI_VDEVICE(NVIDIA, 0x044f), board_ahci_mcp65 }, /* MCP65 */
+ { PCI_VDEVICE(NVIDIA, 0x045c), board_ahci_mcp65 }, /* MCP65 */
+ { PCI_VDEVICE(NVIDIA, 0x045d), board_ahci_mcp65 }, /* MCP65 */
+ { PCI_VDEVICE(NVIDIA, 0x045e), board_ahci_mcp65 }, /* MCP65 */
+ { PCI_VDEVICE(NVIDIA, 0x045f), board_ahci_mcp65 }, /* MCP65 */
{ PCI_VDEVICE(NVIDIA, 0x0550), board_ahci }, /* MCP67 */
{ PCI_VDEVICE(NVIDIA, 0x0551), board_ahci }, /* MCP67 */
{ PCI_VDEVICE(NVIDIA, 0x0552), board_ahci }, /* MCP67 */
@@ -502,10 +519,10 @@
{ PCI_VDEVICE(NVIDIA, 0x0bcd), board_ahci }, /* MCP7B */
{ PCI_VDEVICE(NVIDIA, 0x0bce), board_ahci }, /* MCP7B */
{ PCI_VDEVICE(NVIDIA, 0x0bcf), board_ahci }, /* MCP7B */
- { PCI_VDEVICE(NVIDIA, 0x0bd0), board_ahci }, /* MCP7B */
- { PCI_VDEVICE(NVIDIA, 0x0bd1), board_ahci }, /* MCP7B */
- { PCI_VDEVICE(NVIDIA, 0x0bd2), board_ahci }, /* MCP7B */
- { PCI_VDEVICE(NVIDIA, 0x0bd3), board_ahci }, /* MCP7B */
+ { PCI_VDEVICE(NVIDIA, 0x0bc4), board_ahci }, /* MCP7B */
+ { PCI_VDEVICE(NVIDIA, 0x0bc5), board_ahci }, /* MCP7B */
+ { PCI_VDEVICE(NVIDIA, 0x0bc6), board_ahci }, /* MCP7B */
+ { PCI_VDEVICE(NVIDIA, 0x0bc7), board_ahci }, /* MCP7B */
/* SiS */
{ PCI_VDEVICE(SI, 0x1184), board_ahci }, /* SiS 966 */
@@ -624,6 +641,12 @@
cap &= ~HOST_CAP_NCQ;
}
+ if (!(cap & HOST_CAP_NCQ) && (hpriv->flags & AHCI_HFLAG_YES_NCQ)) {
+ dev_printk(KERN_INFO, &pdev->dev,
+ "controller can do NCQ, turning on CAP_NCQ\n");
+ cap |= HOST_CAP_NCQ;
+ }
+
if ((cap & HOST_CAP_PMP) && (hpriv->flags & AHCI_HFLAG_NO_PMP)) {
dev_printk(KERN_INFO, &pdev->dev,
"controller can't do PMP, turning off CAP_PMP\n");
@@ -1262,19 +1285,11 @@
return 0;
}
-static int ahci_check_ready(struct ata_link *link)
-{
- void __iomem *port_mmio = ahci_port_base(link->ap);
- u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF;
-
- return ata_check_ready(status);
-}
-
-static int ahci_softreset(struct ata_link *link, unsigned int *class,
- unsigned long deadline)
+static int ahci_do_softreset(struct ata_link *link, unsigned int *class,
+ int pmp, unsigned long deadline,
+ int (*check_ready)(struct ata_link *link))
{
struct ata_port *ap = link->ap;
- int pmp = sata_srst_pmp(link);
const char *reason = NULL;
unsigned long now, msecs;
struct ata_taskfile tf;
@@ -1312,7 +1327,7 @@
ahci_exec_polled_cmd(ap, pmp, &tf, 0, 0, 0);
/* wait for link to become ready */
- rc = ata_wait_after_reset(link, deadline, ahci_check_ready);
+ rc = ata_wait_after_reset(link, deadline, check_ready);
/* link occupied, -ENODEV too is an error */
if (rc) {
reason = "device not ready";
@@ -1328,6 +1343,72 @@
return rc;
}
+static int ahci_check_ready(struct ata_link *link)
+{
+ void __iomem *port_mmio = ahci_port_base(link->ap);
+ u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF;
+
+ return ata_check_ready(status);
+}
+
+static int ahci_softreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline)
+{
+ int pmp = sata_srst_pmp(link);
+
+ DPRINTK("ENTER\n");
+
+ return ahci_do_softreset(link, class, pmp, deadline, ahci_check_ready);
+}
+
+static int ahci_sb600_check_ready(struct ata_link *link)
+{
+ void __iomem *port_mmio = ahci_port_base(link->ap);
+ u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF;
+ u32 irq_status = readl(port_mmio + PORT_IRQ_STAT);
+
+ /*
+ * There is no need to check TFDATA if BAD PMP is found due to HW bug,
+ * which can save timeout delay.
+ */
+ if (irq_status & PORT_IRQ_BAD_PMP)
+ return -EIO;
+
+ return ata_check_ready(status);
+}
+
+static int ahci_sb600_softreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline)
+{
+ struct ata_port *ap = link->ap;
+ void __iomem *port_mmio = ahci_port_base(ap);
+ int pmp = sata_srst_pmp(link);
+ int rc;
+ u32 irq_sts;
+
+ DPRINTK("ENTER\n");
+
+ rc = ahci_do_softreset(link, class, pmp, deadline,
+ ahci_sb600_check_ready);
+
+ /*
+ * Soft reset fails on some ATI chips with IPMS set when PMP
+ * is enabled but SATA HDD/ODD is connected to SATA port,
+ * do soft reset again to port 0.
+ */
+ if (rc == -EIO) {
+ irq_sts = readl(port_mmio + PORT_IRQ_STAT);
+ if (irq_sts & PORT_IRQ_BAD_PMP) {
+ ata_link_printk(link, KERN_WARNING,
+ "failed due to HW bug, retry pmp=0\n");
+ rc = ahci_do_softreset(link, class, 0, deadline,
+ ahci_check_ready);
+ }
+ }
+
+ return rc;
+}
+
static int ahci_hardreset(struct ata_link *link, unsigned int *class,
unsigned long deadline)
{
@@ -2118,7 +2199,8 @@
static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
{
static int printed_version;
- struct ata_port_info pi = ahci_port_info[ent->driver_data];
+ unsigned int board_id = ent->driver_data;
+ struct ata_port_info pi = ahci_port_info[board_id];
const struct ata_port_info *ppi[] = { &pi, NULL };
struct device *dev = &pdev->dev;
struct ahci_host_priv *hpriv;
@@ -2167,6 +2249,11 @@
return -ENOMEM;
hpriv->flags |= (unsigned long)pi.private_data;
+ /* MCP65 revision A1 and A2 can't do MSI */
+ if (board_id == board_ahci_mcp65 &&
+ (pdev->revision == 0xa1 || pdev->revision == 0xa2))
+ hpriv->flags |= AHCI_HFLAG_NO_MSI;
+
if ((hpriv->flags & AHCI_HFLAG_NO_MSI) || pci_enable_msi(pdev))
pci_intx(pdev, 1);
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index a9027b8..81b7ae3 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -247,10 +247,11 @@
{ 0x8086, 0x2820, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
/* SATA Controller 2 IDE (ICH8) */
{ 0x8086, 0x2825, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
- /* Mobile SATA Controller IDE (ICH8M) */
- { 0x8086, 0x2828, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
/* Mobile SATA Controller IDE (ICH8M), Apple */
{ 0x8086, 0x2828, 0x106b, 0x00a0, 0, 0, ich8m_apple_sata },
+ { 0x8086, 0x2828, 0x106b, 0x00a1, 0, 0, ich8m_apple_sata },
+ /* Mobile SATA Controller IDE (ICH8M) */
+ { 0x8086, 0x2828, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
/* SATA Controller IDE (ICH9) */
{ 0x8086, 0x2920, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
/* SATA Controller IDE (ICH9) */
@@ -526,7 +527,7 @@
[ich8m_apple_sata] =
{
- .flags = PIIX_SATA_FLAGS | PIIX_FLAG_SIDPR,
+ .flags = PIIX_SATA_FLAGS,
.pio_mask = 0x1f, /* pio0-4 */
.mwdma_mask = 0x07, /* mwdma0-2 */
.udma_mask = ATA_UDMA6,
@@ -573,6 +574,8 @@
{ 0x27DF, 0x1043, 0x1267 }, /* ICH7 on Asus W5F */
{ 0x27DF, 0x103C, 0x30A1 }, /* ICH7 on HP Compaq nc2400 */
{ 0x24CA, 0x1025, 0x0061 }, /* ICH4 on ACER Aspire 2023WLMi */
+ { 0x24CA, 0x1025, 0x003d }, /* ICH4 on ACER TM290 */
+ { 0x266F, 0x1025, 0x0066 }, /* ICH6 on ACER Aspire 1694WLMi */
{ 0x2653, 0x1043, 0x82D8 }, /* ICH6M on Asus Eee 701 */
/* end marker */
{ 0, }
diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c
index 70b77e0..3ff8b14 100644
--- a/drivers/ata/libata-acpi.c
+++ b/drivers/ata/libata-acpi.c
@@ -118,19 +118,82 @@
ap->pflags |= ATA_PFLAG_INIT_GTM_VALID;
}
+static void ata_acpi_eject_device(acpi_handle handle)
+{
+ struct acpi_object_list arg_list;
+ union acpi_object arg;
+
+ arg_list.count = 1;
+ arg_list.pointer = &arg;
+ arg.type = ACPI_TYPE_INTEGER;
+ arg.integer.value = 1;
+
+ if (ACPI_FAILURE(acpi_evaluate_object(handle, "_EJ0",
+ &arg_list, NULL)))
+ printk(KERN_ERR "Failed to evaluate _EJ0!\n");
+}
+
+/* @ap and @dev are the same as ata_acpi_handle_hotplug() */
+static void ata_acpi_detach_device(struct ata_port *ap, struct ata_device *dev)
+{
+ if (dev)
+ dev->flags |= ATA_DFLAG_DETACH;
+ else {
+ struct ata_link *tlink;
+ struct ata_device *tdev;
+
+ ata_port_for_each_link(tlink, ap)
+ ata_link_for_each_dev(tdev, tlink)
+ tdev->flags |= ATA_DFLAG_DETACH;
+ }
+
+ ata_port_schedule_eh(ap);
+}
+
+/**
+ * ata_acpi_handle_hotplug - ACPI event handler backend
+ * @ap: ATA port ACPI event occurred
+ * @dev: ATA device ACPI event occurred (can be NULL)
+ * @event: ACPI event which occurred
+ * @is_dock_event: boolean indicating whether the event was a dock one
+ *
+ * All ACPI bay / device realted events end up in this function. If
+ * the event is port-wide @dev is NULL. If the event is specific to a
+ * device, @dev points to it.
+ *
+ * Hotplug (as opposed to unplug) notification is always handled as
+ * port-wide while unplug only kills the target device on device-wide
+ * event.
+ *
+ * LOCKING:
+ * ACPI notify handler context. May sleep.
+ */
static void ata_acpi_handle_hotplug(struct ata_port *ap, struct ata_device *dev,
- u32 event)
+ u32 event, int is_dock_event)
{
char event_string[12];
char *envp[] = { event_string, NULL };
- struct ata_eh_info *ehi;
+ struct ata_eh_info *ehi = &ap->link.eh_info;
struct kobject *kobj = NULL;
int wait = 0;
unsigned long flags;
+ acpi_handle handle, tmphandle;
+ unsigned long sta;
+ acpi_status status;
- if (!ap)
- ap = dev->link->ap;
- ehi = &ap->link.eh_info;
+ if (dev) {
+ if (dev->sdev)
+ kobj = &dev->sdev->sdev_gendev.kobj;
+ handle = dev->acpi_handle;
+ } else {
+ kobj = &ap->dev->kobj;
+ handle = ap->acpi_handle;
+ }
+
+ status = acpi_get_handle(handle, "_EJ0", &tmphandle);
+ if (ACPI_FAILURE(status))
+ /* This device does not support hotplug */
+ return;
spin_lock_irqsave(ap->lock, flags);
@@ -138,57 +201,80 @@
case ACPI_NOTIFY_BUS_CHECK:
case ACPI_NOTIFY_DEVICE_CHECK:
ata_ehi_push_desc(ehi, "ACPI event");
- ata_ehi_hotplugged(ehi);
- ata_port_freeze(ap);
- break;
- case ACPI_NOTIFY_EJECT_REQUEST:
- ata_ehi_push_desc(ehi, "ACPI event");
- if (dev)
- dev->flags |= ATA_DFLAG_DETACH;
- else {
- struct ata_link *tlink;
- struct ata_device *tdev;
-
- ata_port_for_each_link(tlink, ap)
- ata_link_for_each_dev(tdev, tlink)
- tdev->flags |= ATA_DFLAG_DETACH;
+ status = acpi_evaluate_integer(handle, "_STA", NULL, &sta);
+ if (ACPI_FAILURE(status)) {
+ ata_port_printk(ap, KERN_ERR,
+ "acpi: failed to determine bay status (0x%x)\n",
+ status);
+ break;
}
- ata_port_schedule_eh(ap);
+ if (sta) {
+ ata_ehi_hotplugged(ehi);
+ ata_port_freeze(ap);
+ } else {
+ /* The device has gone - unplug it */
+ ata_acpi_detach_device(ap, dev);
+ wait = 1;
+ }
+ break;
+ case ACPI_NOTIFY_EJECT_REQUEST:
+ ata_ehi_push_desc(ehi, "ACPI event");
+
+ if (!is_dock_event)
+ break;
+
+ /* undock event - immediate unplug */
+ ata_acpi_detach_device(ap, dev);
wait = 1;
break;
}
- if (dev) {
- if (dev->sdev)
- kobj = &dev->sdev->sdev_gendev.kobj;
- } else
- kobj = &ap->dev->kobj;
+ /* make sure kobj doesn't go away while ap->lock is released */
+ kobject_get(kobj);
- if (kobj) {
+ spin_unlock_irqrestore(ap->lock, flags);
+
+ if (wait) {
+ ata_port_wait_eh(ap);
+ ata_acpi_eject_device(handle);
+ }
+
+ if (kobj && !is_dock_event) {
sprintf(event_string, "BAY_EVENT=%d", event);
kobject_uevent_env(kobj, KOBJ_CHANGE, envp);
}
- spin_unlock_irqrestore(ap->lock, flags);
+ kobject_put(kobj);
+}
- if (wait)
- ata_port_wait_eh(ap);
+static void ata_acpi_dev_notify_dock(acpi_handle handle, u32 event, void *data)
+{
+ struct ata_device *dev = data;
+
+ ata_acpi_handle_hotplug(dev->link->ap, dev, event, 1);
+}
+
+static void ata_acpi_ap_notify_dock(acpi_handle handle, u32 event, void *data)
+{
+ struct ata_port *ap = data;
+
+ ata_acpi_handle_hotplug(ap, NULL, event, 1);
}
static void ata_acpi_dev_notify(acpi_handle handle, u32 event, void *data)
{
struct ata_device *dev = data;
- ata_acpi_handle_hotplug(NULL, dev, event);
+ ata_acpi_handle_hotplug(dev->link->ap, dev, event, 0);
}
static void ata_acpi_ap_notify(acpi_handle handle, u32 event, void *data)
{
struct ata_port *ap = data;
- ata_acpi_handle_hotplug(ap, NULL, event);
+ ata_acpi_handle_hotplug(ap, NULL, event, 0);
}
/**
@@ -229,7 +315,7 @@
ata_acpi_ap_notify, ap);
/* we might be on a docking station */
register_hotplug_dock_device(ap->acpi_handle,
- ata_acpi_ap_notify, ap);
+ ata_acpi_ap_notify_dock, ap);
}
for (j = 0; j < ata_link_max_devices(&ap->link); j++) {
@@ -241,7 +327,7 @@
ata_acpi_dev_notify, dev);
/* we might be on a docking station */
register_hotplug_dock_device(dev->acpi_handle,
- ata_acpi_dev_notify, dev);
+ ata_acpi_dev_notify_dock, dev);
}
}
}
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 927b692..cc816ca 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -2126,6 +2126,13 @@
dev->horkage |= ata_dev_blacklisted(dev);
ata_force_horkage(dev);
+ if (dev->horkage & ATA_HORKAGE_DISABLE) {
+ ata_dev_printk(dev, KERN_INFO,
+ "unsupported device, disabling\n");
+ ata_dev_disable(dev);
+ return 0;
+ }
+
/* let ACPI work its magic */
rc = ata_acpi_on_devcfg(dev);
if (rc)
@@ -3490,22 +3497,11 @@
if ((rc = sata_link_debounce(link, params, deadline)))
return rc;
- /* Clear SError. PMP and some host PHYs require this to
- * operate and clearing should be done before checking PHY
- * online status to avoid race condition (hotplugging between
- * link resume and status check).
- */
+ /* clear SError, some PHYs require this even for SRST to work */
if (!(rc = sata_scr_read(link, SCR_ERROR, &serror)))
rc = sata_scr_write(link, SCR_ERROR, serror);
- if (rc == 0 || rc == -EINVAL) {
- unsigned long flags;
- spin_lock_irqsave(link->ap->lock, flags);
- link->eh_info.serror = 0;
- spin_unlock_irqrestore(link->ap->lock, flags);
- rc = 0;
- }
- return rc;
+ return rc != -EINVAL ? rc : 0;
}
/**
@@ -3653,9 +3649,13 @@
if (check_ready)
rc = ata_wait_ready(link, deadline, check_ready);
out:
- if (rc && rc != -EAGAIN)
+ if (rc && rc != -EAGAIN) {
+ /* online is set iff link is online && reset succeeded */
+ if (online)
+ *online = false;
ata_link_printk(link, KERN_ERR,
"COMRESET failed (errno=%d)\n", rc);
+ }
DPRINTK("EXIT, rc=%d\n", rc);
return rc;
}
@@ -3700,8 +3700,14 @@
*/
void ata_std_postreset(struct ata_link *link, unsigned int *classes)
{
+ u32 serror;
+
DPRINTK("ENTER\n");
+ /* reset complete, clear SError */
+ if (!sata_scr_read(link, SCR_ERROR, &serror))
+ sata_scr_write(link, SCR_ERROR, serror);
+
/* print link status */
sata_print_link_status(link);
@@ -3894,8 +3900,7 @@
{ "SAMSUNG CD-ROM SN-124", "N001", ATA_HORKAGE_NODMA },
{ "Seagate STT20000A", NULL, ATA_HORKAGE_NODMA },
/* Odd clown on sil3726/4726 PMPs */
- { "Config Disk", NULL, ATA_HORKAGE_NODMA |
- ATA_HORKAGE_SKIP_PM },
+ { "Config Disk", NULL, ATA_HORKAGE_DISABLE },
/* Weird ATAPI devices */
{ "TORiSAN DVD-ROM DRD-N216", NULL, ATA_HORKAGE_MAX_SEC_128 },
@@ -5398,7 +5403,7 @@
*/
static void ata_finalize_port_ops(struct ata_port_operations *ops)
{
- static spinlock_t lock = SPIN_LOCK_UNLOCKED;
+ static DEFINE_SPINLOCK(lock);
const struct ata_port_operations *cur;
void **begin = (void **)ops;
void **end = (void **)&ops->inherits;
@@ -5616,7 +5621,7 @@
spin_lock_irqsave(ap->lock, flags);
ehi->probe_mask |= ATA_ALL_DEVICES;
- ehi->action |= ATA_EH_RESET;
+ ehi->action |= ATA_EH_RESET | ATA_EH_LPM;
ehi->flags |= ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET;
ap->pflags &= ~ATA_PFLAG_INITIALIZING;
@@ -5649,7 +5654,6 @@
struct ata_port *ap = host->ports[i];
ata_scsi_scan_host(ap, 1);
- ata_lpm_schedule(ap, ap->pm_policy);
}
return 0;
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 62e0331..7894d83 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -1308,12 +1308,7 @@
unsigned int err_mask = 0, action = 0;
u32 hotplug_mask;
- if (serror & SERR_PERSISTENT) {
- err_mask |= AC_ERR_ATA_BUS;
- action |= ATA_EH_RESET;
- }
- if (serror &
- (SERR_DATA_RECOVERED | SERR_COMM_RECOVERED | SERR_DATA)) {
+ if (serror & (SERR_PERSISTENT | SERR_DATA)) {
err_mask |= AC_ERR_ATA_BUS;
action |= ATA_EH_RESET;
}
@@ -2047,19 +2042,11 @@
unsigned int *classes, unsigned long deadline)
{
struct ata_device *dev;
- int rc;
ata_link_for_each_dev(dev, link)
classes[dev->devno] = ATA_DEV_UNKNOWN;
- rc = reset(link, classes, deadline);
-
- /* convert all ATA_DEV_UNKNOWN to ATA_DEV_NONE */
- ata_link_for_each_dev(dev, link)
- if (classes[dev->devno] == ATA_DEV_UNKNOWN)
- classes[dev->devno] = ATA_DEV_NONE;
-
- return rc;
+ return reset(link, classes, deadline);
}
static int ata_eh_followup_srst_needed(struct ata_link *link,
@@ -2096,9 +2083,11 @@
ata_reset_fn_t reset;
unsigned long flags;
u32 sstatus;
- int rc;
+ int nr_known, rc;
- /* about to reset */
+ /*
+ * Prepare to reset
+ */
spin_lock_irqsave(ap->lock, flags);
ap->pflags |= ATA_PFLAG_RESETTING;
spin_unlock_irqrestore(ap->lock, flags);
@@ -2124,16 +2113,8 @@
ap->ops->set_piomode(ap, dev);
}
- if (!softreset && !hardreset) {
- if (verbose)
- ata_link_printk(link, KERN_INFO, "no reset method "
- "available, skipping reset\n");
- if (!(lflags & ATA_LFLAG_ASSUME_CLASS))
- lflags |= ATA_LFLAG_ASSUME_ATA;
- goto done;
- }
-
/* prefer hardreset */
+ reset = NULL;
ehc->i.action &= ~ATA_EH_RESET;
if (hardreset) {
reset = hardreset;
@@ -2141,11 +2122,6 @@
} else if (softreset) {
reset = softreset;
ehc->i.action = ATA_EH_SOFTRESET;
- } else {
- ata_link_printk(link, KERN_ERR, "BUG: no reset method, "
- "please report to linux-ide@vger.kernel.org\n");
- dump_stack();
- return -EINVAL;
}
if (prereset) {
@@ -2165,55 +2141,71 @@
"prereset failed (errno=%d)\n", rc);
goto out;
}
- }
- /* prereset() might have cleared ATA_EH_RESET */
- if (!(ehc->i.action & ATA_EH_RESET)) {
- /* prereset told us not to reset, bang classes and return */
- ata_link_for_each_dev(dev, link)
- classes[dev->devno] = ATA_DEV_NONE;
- rc = 0;
- goto out;
+ /* prereset() might have cleared ATA_EH_RESET. If so,
+ * bang classes and return.
+ */
+ if (reset && !(ehc->i.action & ATA_EH_RESET)) {
+ ata_link_for_each_dev(dev, link)
+ classes[dev->devno] = ATA_DEV_NONE;
+ rc = 0;
+ goto out;
+ }
}
retry:
+ /*
+ * Perform reset
+ */
+ if (ata_is_host_link(link))
+ ata_eh_freeze_port(ap);
+
deadline = jiffies + ata_eh_reset_timeouts[try++];
- /* shut up during boot probing */
- if (verbose)
- ata_link_printk(link, KERN_INFO, "%s resetting link\n",
- reset == softreset ? "soft" : "hard");
+ if (reset) {
+ if (verbose)
+ ata_link_printk(link, KERN_INFO, "%s resetting link\n",
+ reset == softreset ? "soft" : "hard");
- /* mark that this EH session started with reset */
- if (reset == hardreset)
- ehc->i.flags |= ATA_EHI_DID_HARDRESET;
- else
- ehc->i.flags |= ATA_EHI_DID_SOFTRESET;
+ /* mark that this EH session started with reset */
+ if (reset == hardreset)
+ ehc->i.flags |= ATA_EHI_DID_HARDRESET;
+ else
+ ehc->i.flags |= ATA_EHI_DID_SOFTRESET;
- rc = ata_do_reset(link, reset, classes, deadline);
+ rc = ata_do_reset(link, reset, classes, deadline);
- if (reset == hardreset &&
- ata_eh_followup_srst_needed(link, rc, classify, classes)) {
- /* okay, let's do follow-up softreset */
- reset = softreset;
+ if (reset == hardreset &&
+ ata_eh_followup_srst_needed(link, rc, classify, classes)) {
+ /* okay, let's do follow-up softreset */
+ reset = softreset;
- if (!reset) {
- ata_link_printk(link, KERN_ERR,
- "follow-up softreset required "
- "but no softreset avaliable\n");
- rc = -EINVAL;
- goto fail;
+ if (!reset) {
+ ata_link_printk(link, KERN_ERR,
+ "follow-up softreset required "
+ "but no softreset avaliable\n");
+ rc = -EINVAL;
+ goto fail;
+ }
+
+ ata_eh_about_to_do(link, NULL, ATA_EH_RESET);
+ rc = ata_do_reset(link, reset, classes, deadline);
}
- ata_eh_about_to_do(link, NULL, ATA_EH_RESET);
- rc = ata_do_reset(link, reset, classes, deadline);
+ /* -EAGAIN can happen if we skipped followup SRST */
+ if (rc && rc != -EAGAIN)
+ goto fail;
+ } else {
+ if (verbose)
+ ata_link_printk(link, KERN_INFO, "no reset method "
+ "available, skipping reset\n");
+ if (!(lflags & ATA_LFLAG_ASSUME_CLASS))
+ lflags |= ATA_LFLAG_ASSUME_ATA;
}
- /* -EAGAIN can happen if we skipped followup SRST */
- if (rc && rc != -EAGAIN)
- goto fail;
-
- done:
+ /*
+ * Post-reset processing
+ */
ata_link_for_each_dev(dev, link) {
/* After the reset, the device state is PIO 0 and the
* controller state is undefined. Reset also wakes up
@@ -2236,9 +2228,53 @@
if (sata_scr_read(link, SCR_STATUS, &sstatus) == 0)
link->sata_spd = (sstatus >> 4) & 0xf;
+ /* thaw the port */
+ if (ata_is_host_link(link))
+ ata_eh_thaw_port(ap);
+
+ /* postreset() should clear hardware SError. Although SError
+ * is cleared during link resume, clearing SError here is
+ * necessary as some PHYs raise hotplug events after SRST.
+ * This introduces race condition where hotplug occurs between
+ * reset and here. This race is mediated by cross checking
+ * link onlineness and classification result later.
+ */
if (postreset)
postreset(link, classes);
+ /* clear cached SError */
+ spin_lock_irqsave(link->ap->lock, flags);
+ link->eh_info.serror = 0;
+ spin_unlock_irqrestore(link->ap->lock, flags);
+
+ /* Make sure onlineness and classification result correspond.
+ * Hotplug could have happened during reset and some
+ * controllers fail to wait while a drive is spinning up after
+ * being hotplugged causing misdetection. By cross checking
+ * link onlineness and classification result, those conditions
+ * can be reliably detected and retried.
+ */
+ nr_known = 0;
+ ata_link_for_each_dev(dev, link) {
+ /* convert all ATA_DEV_UNKNOWN to ATA_DEV_NONE */
+ if (classes[dev->devno] == ATA_DEV_UNKNOWN)
+ classes[dev->devno] = ATA_DEV_NONE;
+ else
+ nr_known++;
+ }
+
+ if (classify && !nr_known && ata_link_online(link)) {
+ if (try < max_tries) {
+ ata_link_printk(link, KERN_WARNING, "link online but "
+ "device misclassified, retrying\n");
+ rc = -EAGAIN;
+ goto fail;
+ }
+ ata_link_printk(link, KERN_WARNING,
+ "link online but device misclassified, "
+ "device detection might fail\n");
+ }
+
/* reset successful, schedule revalidation */
ata_eh_done(link, NULL, ATA_EH_RESET);
ehc->i.action |= ATA_EH_REVALIDATE;
@@ -2587,7 +2623,7 @@
struct ata_link *link;
struct ata_device *dev;
int nr_failed_devs, nr_disabled_devs;
- int reset, rc;
+ int rc;
unsigned long flags;
DPRINTK("ENTER\n");
@@ -2630,7 +2666,6 @@
rc = 0;
nr_failed_devs = 0;
nr_disabled_devs = 0;
- reset = 0;
/* if UNLOADING, finish immediately */
if (ap->pflags & ATA_PFLAG_UNLOADING)
@@ -2644,40 +2679,24 @@
if (ata_eh_skip_recovery(link))
ehc->i.action = 0;
- /* do we need to reset? */
- if (ehc->i.action & ATA_EH_RESET)
- reset = 1;
-
ata_link_for_each_dev(dev, link)
ehc->classes[dev->devno] = ATA_DEV_UNKNOWN;
}
/* reset */
- if (reset) {
- /* if PMP is attached, this function only deals with
- * downstream links, port should stay thawed.
- */
- if (!sata_pmp_attached(ap))
- ata_eh_freeze_port(ap);
+ ata_port_for_each_link(link, ap) {
+ struct ata_eh_context *ehc = &link->eh_context;
- ata_port_for_each_link(link, ap) {
- struct ata_eh_context *ehc = &link->eh_context;
+ if (!(ehc->i.action & ATA_EH_RESET))
+ continue;
- if (!(ehc->i.action & ATA_EH_RESET))
- continue;
-
- rc = ata_eh_reset(link, ata_link_nr_vacant(link),
- prereset, softreset, hardreset,
- postreset);
- if (rc) {
- ata_link_printk(link, KERN_ERR,
- "reset failed, giving up\n");
- goto out;
- }
+ rc = ata_eh_reset(link, ata_link_nr_vacant(link),
+ prereset, softreset, hardreset, postreset);
+ if (rc) {
+ ata_link_printk(link, KERN_ERR,
+ "reset failed, giving up\n");
+ goto out;
}
-
- if (!sata_pmp_attached(ap))
- ata_eh_thaw_port(ap);
}
/* the rest */
diff --git a/drivers/ata/libata-pmp.c b/drivers/ata/libata-pmp.c
index ff1822a..7daf4c0 100644
--- a/drivers/ata/libata-pmp.c
+++ b/drivers/ata/libata-pmp.c
@@ -48,7 +48,7 @@
tf.device = link->pmp;
err_mask = ata_exec_internal(pmp_dev, &tf, NULL, DMA_NONE, NULL, 0,
- SATA_PMP_SCR_TIMEOUT);
+ SATA_PMP_RW_TIMEOUT);
if (err_mask)
return err_mask;
@@ -88,7 +88,7 @@
tf.lbah = (val >> 24) & 0xff;
return ata_exec_internal(pmp_dev, &tf, NULL, DMA_NONE, NULL, 0,
- SATA_PMP_SCR_TIMEOUT);
+ SATA_PMP_RW_TIMEOUT);
}
/**
@@ -257,19 +257,6 @@
goto fail;
}
- /* turn off notification till fan-out ports are reset and configured */
- if (gscr[SATA_PMP_GSCR_FEAT_EN] & SATA_PMP_FEAT_NOTIFY) {
- gscr[SATA_PMP_GSCR_FEAT_EN] &= ~SATA_PMP_FEAT_NOTIFY;
-
- err_mask = sata_pmp_write(dev->link, SATA_PMP_GSCR_FEAT_EN,
- gscr[SATA_PMP_GSCR_FEAT_EN]);
- if (err_mask) {
- rc = -EIO;
- reason = "failed to write GSCR_FEAT_EN";
- goto fail;
- }
- }
-
if (print_info) {
ata_dev_printk(dev, KERN_INFO, "Port Multiplier %s, "
"0x%04x:0x%04x r%d, %d ports, feat 0x%x/0x%x\n",
@@ -335,9 +322,12 @@
if (vendor == 0x1095 && devid == 0x3726) {
/* sil3726 quirks */
ata_port_for_each_link(link, ap) {
- /* class code report is unreliable */
+ /* Class code report is unreliable and SRST
+ * times out under certain configurations.
+ */
if (link->pmp < 5)
- link->flags |= ATA_LFLAG_ASSUME_ATA;
+ link->flags |= ATA_LFLAG_NO_SRST |
+ ATA_LFLAG_ASSUME_ATA;
/* port 5 is for SEMB device and it doesn't like SRST */
if (link->pmp == 5)
@@ -700,8 +690,6 @@
if (ehc->i.action & ATA_EH_RESET) {
struct ata_link *tlink;
- ata_eh_freeze_port(ap);
-
/* reset */
rc = ata_eh_reset(link, 0, prereset, softreset, hardreset,
postreset);
@@ -711,8 +699,6 @@
goto fail;
}
- ata_eh_thaw_port(ap);
-
/* PMP is reset, SErrors cannot be trusted, scan all */
ata_port_for_each_link(tlink, ap) {
struct ata_eh_context *ehc = &tlink->eh_context;
@@ -864,6 +850,7 @@
struct ata_link *pmp_link = &ap->link;
struct ata_device *pmp_dev = pmp_link->device;
struct ata_eh_context *pmp_ehc = &pmp_link->eh_context;
+ u32 *gscr = pmp_dev->gscr;
struct ata_link *link;
struct ata_device *dev;
unsigned int err_mask;
@@ -901,6 +888,22 @@
if (rc)
goto pmp_fail;
+ /* PHY event notification can disturb reset and other recovery
+ * operations. Turn it off.
+ */
+ if (gscr[SATA_PMP_GSCR_FEAT_EN] & SATA_PMP_FEAT_NOTIFY) {
+ gscr[SATA_PMP_GSCR_FEAT_EN] &= ~SATA_PMP_FEAT_NOTIFY;
+
+ err_mask = sata_pmp_write(pmp_link, SATA_PMP_GSCR_FEAT_EN,
+ gscr[SATA_PMP_GSCR_FEAT_EN]);
+ if (err_mask) {
+ ata_link_printk(pmp_link, KERN_WARNING,
+ "failed to disable NOTIFY (err_mask=0x%x)\n",
+ err_mask);
+ goto pmp_fail;
+ }
+ }
+
/* handle disabled links */
rc = sata_pmp_eh_handle_disabled_links(ap);
if (rc)
@@ -923,10 +926,10 @@
/* enable notification */
if (pmp_dev->flags & ATA_DFLAG_AN) {
- pmp_dev->gscr[SATA_PMP_GSCR_FEAT_EN] |= SATA_PMP_FEAT_NOTIFY;
+ gscr[SATA_PMP_GSCR_FEAT_EN] |= SATA_PMP_FEAT_NOTIFY;
- err_mask = sata_pmp_write(pmp_dev->link, SATA_PMP_GSCR_FEAT_EN,
- pmp_dev->gscr[SATA_PMP_GSCR_FEAT_EN]);
+ err_mask = sata_pmp_write(pmp_link, SATA_PMP_GSCR_FEAT_EN,
+ gscr[SATA_PMP_GSCR_FEAT_EN]);
if (err_mask) {
ata_dev_printk(pmp_dev, KERN_ERR, "failed to write "
"PMP_FEAT_EN (Emask=0x%x)\n", err_mask);
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 3ce4392..2e6e162 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -1082,12 +1082,6 @@
if (((cdb[4] >> 4) & 0xf) != 0)
goto invalid_fld; /* power conditions not supported */
- if (qc->dev->horkage & ATA_HORKAGE_SKIP_PM) {
- /* the device lacks PM support, finish without doing anything */
- scmd->result = SAM_STAT_GOOD;
- return 1;
- }
-
if (cdb[4] & 0x1) {
tf->nsect = 1; /* 1 sector, lba=0 */
@@ -1643,6 +1637,7 @@
/**
* ata_scsi_rbuf_get - Map response buffer.
+ * @cmd: SCSI command containing buffer to be mapped.
* @flags: unsigned long variable to store irq enable status
* @copy_in: copy in from user buffer
*
@@ -1960,7 +1955,7 @@
/**
* ata_msense_rw_recovery - Simulate MODE SENSE r/w error recovery page
- * @bufp: output buffer
+ * @buf: output buffer
*
* Generate a generic MODE SENSE r/w error recovery page.
*
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 3c2d228..215d186 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -247,7 +247,7 @@
* LOCKING:
* Inherited from caller.
*/
-u8 ata_sff_altstatus(struct ata_port *ap)
+static u8 ata_sff_altstatus(struct ata_port *ap)
{
if (ap->ops->sff_check_altstatus)
return ap->ops->sff_check_altstatus(ap);
@@ -256,6 +256,93 @@
}
/**
+ * ata_sff_irq_status - Check if the device is busy
+ * @ap: port where the device is
+ *
+ * Determine if the port is currently busy. Uses altstatus
+ * if available in order to avoid clearing shared IRQ status
+ * when finding an IRQ source. Non ctl capable devices don't
+ * share interrupt lines fortunately for us.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+static u8 ata_sff_irq_status(struct ata_port *ap)
+{
+ u8 status;
+
+ if (ap->ops->sff_check_altstatus || ap->ioaddr.altstatus_addr) {
+ status = ata_sff_altstatus(ap);
+ /* Not us: We are busy */
+ if (status & ATA_BUSY)
+ return status;
+ }
+ /* Clear INTRQ latch */
+ status = ap->ops->sff_check_status(ap);
+ return status;
+}
+
+/**
+ * ata_sff_sync - Flush writes
+ * @ap: Port to wait for.
+ *
+ * CAUTION:
+ * If we have an mmio device with no ctl and no altstatus
+ * method this will fail. No such devices are known to exist.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+
+static void ata_sff_sync(struct ata_port *ap)
+{
+ if (ap->ops->sff_check_altstatus)
+ ap->ops->sff_check_altstatus(ap);
+ else if (ap->ioaddr.altstatus_addr)
+ ioread8(ap->ioaddr.altstatus_addr);
+}
+
+/**
+ * ata_sff_pause - Flush writes and wait 400nS
+ * @ap: Port to pause for.
+ *
+ * CAUTION:
+ * If we have an mmio device with no ctl and no altstatus
+ * method this will fail. No such devices are known to exist.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+
+void ata_sff_pause(struct ata_port *ap)
+{
+ ata_sff_sync(ap);
+ ndelay(400);
+}
+
+/**
+ * ata_sff_dma_pause - Pause before commencing DMA
+ * @ap: Port to pause for.
+ *
+ * Perform I/O fencing and ensure sufficient cycle delays occur
+ * for the HDMA1:0 transition
+ */
+
+void ata_sff_dma_pause(struct ata_port *ap)
+{
+ if (ap->ops->sff_check_altstatus || ap->ioaddr.altstatus_addr) {
+ /* An altstatus read will cause the needed delay without
+ messing up the IRQ status */
+ ata_sff_altstatus(ap);
+ return;
+ }
+ /* There are no DMA controllers without ctl. BUG here to ensure
+ we never violate the HDMA1:0 transition timing and risk
+ corruption. */
+ BUG();
+}
+
+/**
* ata_sff_busy_sleep - sleep until BSY clears, or timeout
* @ap: port containing status register to be polled
* @tmout_pat: impatience timeout
@@ -742,7 +829,7 @@
} else
ata_pio_sector(qc);
- ata_sff_altstatus(qc->ap); /* flush */
+ ata_sff_sync(qc->ap); /* flush */
}
/**
@@ -763,8 +850,9 @@
WARN_ON(qc->dev->cdb_len < 12);
ap->ops->sff_data_xfer(qc->dev, qc->cdb, qc->dev->cdb_len, 1);
- ata_sff_altstatus(ap); /* flush */
-
+ ata_sff_sync(ap);
+ /* FIXME: If the CDB is for DMA do we need to do the transition delay
+ or is bmdma_start guaranteed to do it ? */
switch (qc->tf.protocol) {
case ATAPI_PROT_PIO:
ap->hsm_task_state = HSM_ST;
@@ -905,7 +993,7 @@
if (unlikely(__atapi_pio_bytes(qc, bytes)))
goto err_out;
- ata_sff_altstatus(ap); /* flush */
+ ata_sff_sync(ap); /* flush */
return;
@@ -1489,14 +1577,10 @@
goto idle_irq;
}
- /* check altstatus */
- status = ata_sff_altstatus(ap);
- if (status & ATA_BUSY)
- goto idle_irq;
- /* check main status, clearing INTRQ */
- status = ap->ops->sff_check_status(ap);
- if (unlikely(status & ATA_BUSY))
+ /* check main status, clearing INTRQ if needed */
+ status = ata_sff_irq_status(ap);
+ if (status & ATA_BUSY)
goto idle_irq;
/* ack bmdma irq events */
@@ -2030,7 +2114,7 @@
ap->ops->bmdma_stop(qc);
}
- ata_sff_altstatus(ap);
+ ata_sff_sync(ap); /* FIXME: We don't need this */
ap->ops->sff_check_status(ap);
ap->ops->sff_irq_clear(ap);
@@ -2203,7 +2287,7 @@
mmio + ATA_DMA_CMD);
/* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */
- ata_sff_altstatus(ap); /* dummy read */
+ ata_sff_dma_pause(ap);
}
/**
@@ -2722,7 +2806,8 @@
EXPORT_SYMBOL_GPL(ata_sff_dumb_qc_prep);
EXPORT_SYMBOL_GPL(ata_sff_dev_select);
EXPORT_SYMBOL_GPL(ata_sff_check_status);
-EXPORT_SYMBOL_GPL(ata_sff_altstatus);
+EXPORT_SYMBOL_GPL(ata_sff_dma_pause);
+EXPORT_SYMBOL_GPL(ata_sff_pause);
EXPORT_SYMBOL_GPL(ata_sff_busy_sleep);
EXPORT_SYMBOL_GPL(ata_sff_wait_ready);
EXPORT_SYMBOL_GPL(ata_sff_tf_load);
diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c
index fcabe46..0f3e659 100644
--- a/drivers/ata/pata_ali.c
+++ b/drivers/ata/pata_ali.c
@@ -177,11 +177,11 @@
u8 udma;
if (t != NULL) {
- t->setup = FIT(t->setup, 1, 8) & 7;
- t->act8b = FIT(t->act8b, 1, 8) & 7;
- t->rec8b = FIT(t->rec8b, 1, 16) & 15;
- t->active = FIT(t->active, 1, 8) & 7;
- t->recover = FIT(t->recover, 1, 16) & 15;
+ t->setup = clamp_val(t->setup, 1, 8) & 7;
+ t->act8b = clamp_val(t->act8b, 1, 8) & 7;
+ t->rec8b = clamp_val(t->rec8b, 1, 16) & 15;
+ t->active = clamp_val(t->active, 1, 8) & 7;
+ t->recover = clamp_val(t->recover, 1, 16) & 15;
pci_write_config_byte(pdev, cas, t->setup);
pci_write_config_byte(pdev, cbt, (t->act8b << 4) | t->rec8b);
diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c
index 26665c3..57dd00f 100644
--- a/drivers/ata/pata_amd.c
+++ b/drivers/ata/pata_amd.c
@@ -84,32 +84,32 @@
/* Configure the address set up timing */
pci_read_config_byte(pdev, offset + 0x0C, &t);
- t = (t & ~(3 << ((3 - dn) << 1))) | ((FIT(at.setup, 1, 4) - 1) << ((3 - dn) << 1));
+ t = (t & ~(3 << ((3 - dn) << 1))) | ((clamp_val(at.setup, 1, 4) - 1) << ((3 - dn) << 1));
pci_write_config_byte(pdev, offset + 0x0C , t);
/* Configure the 8bit I/O timing */
pci_write_config_byte(pdev, offset + 0x0E + (1 - (dn >> 1)),
- ((FIT(at.act8b, 1, 16) - 1) << 4) | (FIT(at.rec8b, 1, 16) - 1));
+ ((clamp_val(at.act8b, 1, 16) - 1) << 4) | (clamp_val(at.rec8b, 1, 16) - 1));
/* Drive timing */
pci_write_config_byte(pdev, offset + 0x08 + (3 - dn),
- ((FIT(at.active, 1, 16) - 1) << 4) | (FIT(at.recover, 1, 16) - 1));
+ ((clamp_val(at.active, 1, 16) - 1) << 4) | (clamp_val(at.recover, 1, 16) - 1));
switch (clock) {
case 1:
- t = at.udma ? (0xc0 | (FIT(at.udma, 2, 5) - 2)) : 0x03;
+ t = at.udma ? (0xc0 | (clamp_val(at.udma, 2, 5) - 2)) : 0x03;
break;
case 2:
- t = at.udma ? (0xc0 | amd_cyc2udma[FIT(at.udma, 2, 10)]) : 0x03;
+ t = at.udma ? (0xc0 | amd_cyc2udma[clamp_val(at.udma, 2, 10)]) : 0x03;
break;
case 3:
- t = at.udma ? (0xc0 | amd_cyc2udma[FIT(at.udma, 1, 10)]) : 0x03;
+ t = at.udma ? (0xc0 | amd_cyc2udma[clamp_val(at.udma, 1, 10)]) : 0x03;
break;
case 4:
- t = at.udma ? (0xc0 | amd_cyc2udma[FIT(at.udma, 1, 15)]) : 0x03;
+ t = at.udma ? (0xc0 | amd_cyc2udma[clamp_val(at.udma, 1, 15)]) : 0x03;
break;
default:
diff --git a/drivers/ata/pata_at32.c b/drivers/ata/pata_at32.c
index 5e10438..82fb6e2 100644
--- a/drivers/ata/pata_at32.c
+++ b/drivers/ata/pata_at32.c
@@ -291,8 +291,6 @@
if (!info)
return -ENOMEM;
- memset(info, 0, sizeof(struct at32_ide_info));
-
info->irq = irq;
info->cs = board->cs;
diff --git a/drivers/ata/pata_bf54x.c b/drivers/ata/pata_bf54x.c
index 9ab8973..5551610 100644
--- a/drivers/ata/pata_bf54x.c
+++ b/drivers/ata/pata_bf54x.c
@@ -911,7 +911,10 @@
/* Reset all transfer count */
ATAPI_SET_CONTROL(base, ATAPI_GET_CONTROL(base) | TFRCNT_RST);
- /* Set transfer length to buffer len */
+ /* Set ATAPI state machine contorl in terminate sequence */
+ ATAPI_SET_CONTROL(base, ATAPI_GET_CONTROL(base) | END_ON_TERM);
+
+ /* Set transfer length to buffer len */
for_each_sg(qc->sg, sg, qc->n_elem, si) {
ATAPI_SET_XFER_LEN(base, (sg_dma_len(sg) >> 1));
}
diff --git a/drivers/ata/pata_cypress.c b/drivers/ata/pata_cypress.c
index a9c3218..2ff6260 100644
--- a/drivers/ata/pata_cypress.c
+++ b/drivers/ata/pata_cypress.c
@@ -62,14 +62,14 @@
return;
}
- time_16 = FIT(t.recover, 0, 15) | (FIT(t.active, 0, 15) << 4);
- time_8 = FIT(t.act8b, 0, 15) | (FIT(t.rec8b, 0, 15) << 4);
+ time_16 = clamp_val(t.recover, 0, 15) | (clamp_val(t.active, 0, 15) << 4);
+ time_8 = clamp_val(t.act8b, 0, 15) | (clamp_val(t.rec8b, 0, 15) << 4);
if (adev->devno == 0) {
pci_read_config_dword(pdev, CY82_IDE_ADDRSETUP, &addr);
addr &= ~0x0F; /* Mask bits */
- addr |= FIT(t.setup, 0, 15);
+ addr |= clamp_val(t.setup, 0, 15);
pci_write_config_dword(pdev, CY82_IDE_ADDRSETUP, addr);
pci_write_config_byte(pdev, CY82_IDE_MASTER_IOR, time_16);
@@ -79,7 +79,7 @@
pci_read_config_dword(pdev, CY82_IDE_ADDRSETUP, &addr);
addr &= ~0xF0; /* Mask bits */
- addr |= (FIT(t.setup, 0, 15) << 4);
+ addr |= (clamp_val(t.setup, 0, 15) << 4);
pci_write_config_dword(pdev, CY82_IDE_ADDRSETUP, addr);
pci_write_config_byte(pdev, CY82_IDE_SLAVE_IOR, time_16);
diff --git a/drivers/ata/pata_icside.c b/drivers/ata/pata_icside.c
index 1713843..cf9e984 100644
--- a/drivers/ata/pata_icside.c
+++ b/drivers/ata/pata_icside.c
@@ -270,7 +270,7 @@
disable_dma(state->dma);
/* see ata_bmdma_stop */
- ata_sff_altstatus(ap);
+ ata_sff_dma_pause(ap);
}
static u8 pata_icside_bmdma_status(struct ata_port *ap)
diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c
index 7af4b29..fe7cc8e 100644
--- a/drivers/ata/pata_legacy.c
+++ b/drivers/ata/pata_legacy.c
@@ -343,8 +343,8 @@
/* Get the timing data in cycles. For now play safe at 50Mhz */
ata_timing_compute(adev, adev->pio_mode, &t, 20000, 1000);
- active = FIT(t.active, 2, 15);
- recover = FIT(t.recover, 4, 15);
+ active = clamp_val(t.active, 2, 15);
+ recover = clamp_val(t.recover, 4, 15);
inb(0x3E6);
inb(0x3E6);
@@ -377,8 +377,8 @@
/* Get the timing data in cycles. For now play safe at 50Mhz */
ata_timing_compute(adev, adev->pio_mode, &t, 20000, 1000);
- active = FIT(t.active, 2, 15);
- recover = FIT(t.recover, 2, 16);
+ active = clamp_val(t.active, 2, 15);
+ recover = clamp_val(t.recover, 2, 16);
recover &= 0x15;
inb(0x3E6);
@@ -462,9 +462,9 @@
ata_timing_merge(&t, &tp, &t, ATA_TIMING_SETUP);
}
- active = FIT(t.active, 2, 17) - 2;
- recover = FIT(t.recover, 1, 16) - 1;
- setup = FIT(t.setup, 1, 4) - 1;
+ active = clamp_val(t.active, 2, 17) - 2;
+ recover = clamp_val(t.recover, 1, 16) - 1;
+ setup = clamp_val(t.setup, 1, 4) - 1;
/* Select the right timing bank for write timing */
rc = ioread8(ap->ioaddr.lbal_addr);
@@ -541,9 +541,9 @@
ata_timing_merge(&t, &tp, &t, ATA_TIMING_SETUP);
}
- active = FIT(t.active, 2, 17) - 2;
- recover = FIT(t.recover, 1, 16) - 1;
- setup = FIT(t.setup, 1, 4) - 1;
+ active = clamp_val(t.active, 2, 17) - 2;
+ recover = clamp_val(t.recover, 1, 16) - 1;
+ setup = clamp_val(t.setup, 1, 4) - 1;
/* Select the right timing bank for write timing */
rc = ioread8(ap->ioaddr.lbal_addr);
@@ -624,11 +624,11 @@
ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);
if (ld_qdi->fast) {
- active = 8 - FIT(t.active, 1, 8);
- recovery = 18 - FIT(t.recover, 3, 18);
+ active = 8 - clamp_val(t.active, 1, 8);
+ recovery = 18 - clamp_val(t.recover, 3, 18);
} else {
- active = 9 - FIT(t.active, 2, 9);
- recovery = 15 - FIT(t.recover, 0, 15);
+ active = 9 - clamp_val(t.active, 2, 9);
+ recovery = 15 - clamp_val(t.recover, 0, 15);
}
timing = (recovery << 4) | active | 0x08;
@@ -658,11 +658,11 @@
ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);
if (ld_qdi->fast) {
- active = 8 - FIT(t.active, 1, 8);
- recovery = 18 - FIT(t.recover, 3, 18);
+ active = 8 - clamp_val(t.active, 1, 8);
+ recovery = 18 - clamp_val(t.recover, 3, 18);
} else {
- active = 9 - FIT(t.active, 2, 9);
- recovery = 15 - FIT(t.recover, 0, 15);
+ active = 9 - clamp_val(t.active, 2, 9);
+ recovery = 15 - clamp_val(t.recover, 0, 15);
}
timing = (recovery << 4) | active | 0x08;
@@ -695,11 +695,11 @@
ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);
if (ld_qdi->fast) {
- active = 8 - FIT(t.active, 1, 8);
- recovery = 18 - FIT(t.recover, 3, 18);
+ active = 8 - clamp_val(t.active, 1, 8);
+ recovery = 18 - clamp_val(t.recover, 3, 18);
} else {
- active = 9 - FIT(t.active, 2, 9);
- recovery = 15 - FIT(t.recover, 0, 15);
+ active = 9 - clamp_val(t.active, 2, 9);
+ recovery = 15 - clamp_val(t.recover, 0, 15);
}
timing = (recovery << 4) | active | 0x08;
ld_qdi->clock[adev->devno] = timing;
@@ -830,8 +830,8 @@
else
ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);
- active = (FIT(t.active, 3, 17) - 1) & 0x0F;
- recovery = (FIT(t.recover, 1, 15) + 1) & 0x0F;
+ active = (clamp_val(t.active, 3, 17) - 1) & 0x0F;
+ recovery = (clamp_val(t.recover, 1, 15) + 1) & 0x0F;
timing = (active << 4) | recovery;
winbond_writecfg(ld_winbond->timing, timing, reg);
@@ -842,7 +842,7 @@
reg |= 0x08; /* FIFO off */
if (!ata_pio_need_iordy(adev))
reg |= 0x02; /* IORDY off */
- reg |= (FIT(t.setup, 0, 3) << 6);
+ reg |= (clamp_val(t.setup, 0, 3) << 6);
winbond_writecfg(ld_winbond->timing, timing + 1, reg);
}
diff --git a/drivers/ata/pata_ns87410.c b/drivers/ata/pata_ns87410.c
index 76d2455..be756b7 100644
--- a/drivers/ata/pata_ns87410.c
+++ b/drivers/ata/pata_ns87410.c
@@ -91,9 +91,9 @@
return;
}
- at.active = FIT(at.active, 2, 16) - 2;
- at.setup = FIT(at.setup, 1, 4) - 1;
- at.recover = FIT(at.recover, 1, 12) - 1;
+ at.active = clamp_val(at.active, 2, 16) - 2;
+ at.setup = clamp_val(at.setup, 1, 4) - 1;
+ at.recover = clamp_val(at.recover, 1, 12) - 1;
idetcr = (at.setup << 6) | (recoverbits[at.recover] << 3) | activebits[at.active];
diff --git a/drivers/ata/pata_ns87415.c b/drivers/ata/pata_ns87415.c
index ae92b00..e0aa7ea 100644
--- a/drivers/ata/pata_ns87415.c
+++ b/drivers/ata/pata_ns87415.c
@@ -66,8 +66,8 @@
ata_timing_compute(adev, adev->pio_mode, &t, T, 0);
- clocking = 17 - FIT(t.active, 2, 17);
- clocking |= (16 - FIT(t.recover, 1, 16)) << 4;
+ clocking = 17 - clamp_val(t.active, 2, 17);
+ clocking |= (16 - clamp_val(t.recover, 1, 16)) << 4;
/* Use the same timing for read and write bytes */
clocking |= (clocking << 8);
pci_write_config_word(dev, timing, clocking);
diff --git a/drivers/ata/pata_qdi.c b/drivers/ata/pata_qdi.c
index bf45cf0..97e5b09 100644
--- a/drivers/ata/pata_qdi.c
+++ b/drivers/ata/pata_qdi.c
@@ -60,11 +60,11 @@
ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);
if (qdi->fast) {
- active = 8 - FIT(t.active, 1, 8);
- recovery = 18 - FIT(t.recover, 3, 18);
+ active = 8 - clamp_val(t.active, 1, 8);
+ recovery = 18 - clamp_val(t.recover, 3, 18);
} else {
- active = 9 - FIT(t.active, 2, 9);
- recovery = 15 - FIT(t.recover, 0, 15);
+ active = 9 - clamp_val(t.active, 2, 9);
+ recovery = 15 - clamp_val(t.recover, 0, 15);
}
timing = (recovery << 4) | active | 0x08;
@@ -84,11 +84,11 @@
ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);
if (qdi->fast) {
- active = 8 - FIT(t.active, 1, 8);
- recovery = 18 - FIT(t.recover, 3, 18);
+ active = 8 - clamp_val(t.active, 1, 8);
+ recovery = 18 - clamp_val(t.recover, 3, 18);
} else {
- active = 9 - FIT(t.active, 2, 9);
- recovery = 15 - FIT(t.recover, 0, 15);
+ active = 9 - clamp_val(t.active, 2, 9);
+ recovery = 15 - clamp_val(t.recover, 0, 15);
}
timing = (recovery << 4) | active | 0x08;
diff --git a/drivers/ata/pata_rb532_cf.c b/drivers/ata/pata_rb532_cf.c
index a108d25..f8b3ffc 100644
--- a/drivers/ata/pata_rb532_cf.c
+++ b/drivers/ata/pata_rb532_cf.c
@@ -57,7 +57,9 @@
struct ata_host *ah = ap->host;
struct rb532_cf_info *info = ah->private_data;
- ata_sff_altstatus(ap);
+ /* FIXME: Keep previous delay. If this is merely a fence then
+ ata_sff_sync might be sufficient. */
+ ata_sff_dma_pause(ap);
ndelay(RB500_CF_IO_DELAY);
set_irq_type(info->irq, IRQ_TYPE_LEVEL_HIGH);
diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c
index e965b25..bbf5aa3 100644
--- a/drivers/ata/pata_scc.c
+++ b/drivers/ata/pata_scc.c
@@ -726,7 +726,7 @@
in_be32(bmid_base + SCC_DMA_CMD) & ~ATA_DMA_START);
/* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */
- ata_sff_altstatus(ap); /* dummy read */
+ ata_sff_dma_pause(ap); /* dummy read */
}
/**
@@ -747,7 +747,8 @@
return host_stat;
/* errata A252,A308 workaround: Step4 */
- if ((ata_sff_altstatus(ap) & ATA_ERR) && (int_status & INTSTS_INTRQ))
+ if ((scc_check_altstatus(ap) & ATA_ERR)
+ && (int_status & INTSTS_INTRQ))
return (host_stat | ATA_DMA_INTR);
/* errata A308 workaround Step5 */
diff --git a/drivers/ata/pata_sl82c105.c b/drivers/ata/pata_sl82c105.c
index 70d94fb..69877bd 100644
--- a/drivers/ata/pata_sl82c105.c
+++ b/drivers/ata/pata_sl82c105.c
@@ -216,7 +216,7 @@
struct ata_port *alt = host->ports[1 ^ qc->ap->port_no];
int rc;
- /* First apply the usual rules */
+ /* First apply the usual rules */
rc = ata_std_qc_defer(qc);
if (rc != 0)
return rc;
diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c
index 2fea6cb..708ed14 100644
--- a/drivers/ata/pata_via.c
+++ b/drivers/ata/pata_via.c
@@ -259,15 +259,15 @@
pci_read_config_byte(pdev, 0x4C, &setup);
setup &= ~(3 << shift);
- setup |= FIT(t.setup, 1, 4) << shift; /* 1,4 or 1,4 - 1 FIXME */
+ setup |= clamp_val(t.setup, 1, 4) << shift; /* 1,4 or 1,4 - 1 FIXME */
pci_write_config_byte(pdev, 0x4C, setup);
}
/* Load the PIO mode bits */
pci_write_config_byte(pdev, 0x4F - ap->port_no,
- ((FIT(t.act8b, 1, 16) - 1) << 4) | (FIT(t.rec8b, 1, 16) - 1));
+ ((clamp_val(t.act8b, 1, 16) - 1) << 4) | (clamp_val(t.rec8b, 1, 16) - 1));
pci_write_config_byte(pdev, 0x48 + offset,
- ((FIT(t.active, 1, 16) - 1) << 4) | (FIT(t.recover, 1, 16) - 1));
+ ((clamp_val(t.active, 1, 16) - 1) << 4) | (clamp_val(t.recover, 1, 16) - 1));
/* Load the UDMA bits according to type */
switch(udma_type) {
@@ -275,16 +275,16 @@
/* BUG() ? */
/* fall through */
case 33:
- ut = t.udma ? (0xe0 | (FIT(t.udma, 2, 5) - 2)) : 0x03;
+ ut = t.udma ? (0xe0 | (clamp_val(t.udma, 2, 5) - 2)) : 0x03;
break;
case 66:
- ut = t.udma ? (0xe8 | (FIT(t.udma, 2, 9) - 2)) : 0x0f;
+ ut = t.udma ? (0xe8 | (clamp_val(t.udma, 2, 9) - 2)) : 0x0f;
break;
case 100:
- ut = t.udma ? (0xe0 | (FIT(t.udma, 2, 9) - 2)) : 0x07;
+ ut = t.udma ? (0xe0 | (clamp_val(t.udma, 2, 9) - 2)) : 0x07;
break;
case 133:
- ut = t.udma ? (0xe0 | (FIT(t.udma, 2, 9) - 2)) : 0x07;
+ ut = t.udma ? (0xe0 | (clamp_val(t.udma, 2, 9) - 2)) : 0x07;
break;
}
diff --git a/drivers/ata/pata_winbond.c b/drivers/ata/pata_winbond.c
index 6e52a35..474528f 100644
--- a/drivers/ata/pata_winbond.c
+++ b/drivers/ata/pata_winbond.c
@@ -75,8 +75,8 @@
else
ata_timing_compute(adev, adev->pio_mode, &t, 30303, 1000);
- active = (FIT(t.active, 3, 17) - 1) & 0x0F;
- recovery = (FIT(t.recover, 1, 15) + 1) & 0x0F;
+ active = (clamp_val(t.active, 3, 17) - 1) & 0x0F;
+ recovery = (clamp_val(t.recover, 1, 15) + 1) & 0x0F;
timing = (active << 4) | recovery;
winbond_writecfg(winbond->config, timing, reg);
@@ -87,7 +87,7 @@
reg |= 0x08; /* FIFO off */
if (!ata_pio_need_iordy(adev))
reg |= 0x02; /* IORDY off */
- reg |= (FIT(t.setup, 0, 3) << 6);
+ reg |= (clamp_val(t.setup, 0, 3) << 6);
winbond_writecfg(winbond->config, timing + 1, reg);
}
diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c
index 853559e..3924e72 100644
--- a/drivers/ata/sata_fsl.c
+++ b/drivers/ata/sata_fsl.c
@@ -34,7 +34,7 @@
SATA_FSL_HOST_FLAGS = (ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA |
- ATA_FLAG_NCQ),
+ ATA_FLAG_PMP | ATA_FLAG_NCQ),
SATA_FSL_MAX_CMDS = SATA_FSL_QUEUE_DEPTH,
SATA_FSL_CMD_HDR_SIZE = 16, /* 4 DWORDS */
@@ -395,7 +395,7 @@
cd = (struct command_desc *)pp->cmdentry + tag;
cd_paddr = pp->cmdentry_paddr + tag * SATA_FSL_CMD_DESC_SIZE;
- ata_tf_to_fis(&qc->tf, 0, 1, (u8 *) &cd->cfis);
+ ata_tf_to_fis(&qc->tf, qc->dev->link->pmp, 1, (u8 *) &cd->cfis);
VPRINTK("Dumping cfis : 0x%x, 0x%x, 0x%x\n",
cd->cfis[0], cd->cfis[1], cd->cfis[2]);
@@ -438,6 +438,8 @@
ioread32(CA + hcr_base),
ioread32(CE + hcr_base), ioread32(CC + hcr_base));
+ iowrite32(qc->dev->link->pmp, CQPMP + hcr_base);
+
/* Simply queue command to the controller/device */
iowrite32(1 << tag, CQ + hcr_base);
@@ -558,11 +560,36 @@
ioread32(hcr_base + HCONTROL), ioread32(hcr_base + HSTATUS));
}
+static void sata_fsl_pmp_attach(struct ata_port *ap)
+{
+ struct sata_fsl_host_priv *host_priv = ap->host->private_data;
+ void __iomem *hcr_base = host_priv->hcr_base;
+ u32 temp;
+
+ temp = ioread32(hcr_base + HCONTROL);
+ iowrite32((temp | HCONTROL_PMP_ATTACHED), hcr_base + HCONTROL);
+}
+
+static void sata_fsl_pmp_detach(struct ata_port *ap)
+{
+ struct sata_fsl_host_priv *host_priv = ap->host->private_data;
+ void __iomem *hcr_base = host_priv->hcr_base;
+ u32 temp;
+
+ temp = ioread32(hcr_base + HCONTROL);
+ temp &= ~HCONTROL_PMP_ATTACHED;
+ iowrite32(temp, hcr_base + HCONTROL);
+
+ /* enable interrupts on the controller/port */
+ temp = ioread32(hcr_base + HCONTROL);
+ iowrite32((temp | DEFAULT_PORT_IRQ_ENABLE_MASK), hcr_base + HCONTROL);
+
+}
+
static int sata_fsl_port_start(struct ata_port *ap)
{
struct device *dev = ap->host->dev;
struct sata_fsl_port_priv *pp;
- int retval;
void *mem;
dma_addr_t mem_dma;
struct sata_fsl_host_priv *host_priv = ap->host->private_data;
@@ -688,12 +715,13 @@
}
static int sata_fsl_softreset(struct ata_link *link, unsigned int *class,
- unsigned long deadline)
+ unsigned long deadline)
{
struct ata_port *ap = link->ap;
struct sata_fsl_port_priv *pp = ap->private_data;
struct sata_fsl_host_priv *host_priv = ap->host->private_data;
void __iomem *hcr_base = host_priv->hcr_base;
+ int pmp = sata_srst_pmp(link);
u32 temp;
struct ata_taskfile tf;
u8 *cfis;
@@ -703,6 +731,9 @@
DPRINTK("in xx_softreset\n");
+ if (pmp != SATA_PMP_CTRL_PORT)
+ goto issue_srst;
+
try_offline_again:
/*
* Force host controller to go off-line, aborting current operations
@@ -746,6 +777,7 @@
temp = ioread32(hcr_base + HCONTROL);
temp |= (HCONTROL_ONLINE_PHY_RST | HCONTROL_SNOOP_ENABLE);
+ temp |= HCONTROL_PMP_ATTACHED;
iowrite32(temp, hcr_base + HCONTROL);
temp = ata_wait_register(hcr_base + HSTATUS, ONLINE, 0, 1, 500);
@@ -771,7 +803,8 @@
ata_port_printk(ap, KERN_WARNING,
"No Device OR PHYRDY change,Hstatus = 0x%x\n",
ioread32(hcr_base + HSTATUS));
- goto err;
+ *class = ATA_DEV_NONE;
+ goto out;
}
/*
@@ -783,7 +816,8 @@
if ((temp & 0xFF) != 0x18) {
ata_port_printk(ap, KERN_WARNING, "No Signature Update\n");
- goto err;
+ *class = ATA_DEV_NONE;
+ goto out;
} else {
ata_port_printk(ap, KERN_INFO,
"Signature Update detected @ %d msecs\n",
@@ -798,6 +832,7 @@
* reached here, we can send a command to the target device
*/
+issue_srst:
DPRINTK("Sending SRST/device reset\n");
ata_tf_init(link->device, &tf);
@@ -808,7 +843,7 @@
SRST_CMD | CMD_DESC_SNOOP_ENABLE, 0, 0, 5);
tf.ctl |= ATA_SRST; /* setup SRST bit in taskfile control reg */
- ata_tf_to_fis(&tf, 0, 0, cfis);
+ ata_tf_to_fis(&tf, pmp, 0, cfis);
DPRINTK("Dumping cfis : 0x%x, 0x%x, 0x%x, 0x%x\n",
cfis[0], cfis[1], cfis[2], cfis[3]);
@@ -854,8 +889,10 @@
sata_fsl_setup_cmd_hdr_entry(pp, 0, CMD_DESC_SNOOP_ENABLE, 0, 0, 5);
tf.ctl &= ~ATA_SRST; /* 2nd H2D Ctl. register FIS */
- ata_tf_to_fis(&tf, 0, 0, cfis);
+ ata_tf_to_fis(&tf, pmp, 0, cfis);
+ if (pmp != SATA_PMP_CTRL_PORT)
+ iowrite32(pmp, CQPMP + hcr_base);
iowrite32(1, CQ + hcr_base);
msleep(150); /* ?? */
@@ -886,12 +923,21 @@
VPRINTK("cereg = 0x%x\n", ioread32(hcr_base + CE));
}
+out:
return 0;
err:
return -EIO;
}
+static void sata_fsl_error_handler(struct ata_port *ap)
+{
+
+ DPRINTK("in xx_error_handler\n");
+ sata_pmp_error_handler(ap);
+
+}
+
static void sata_fsl_post_internal_cmd(struct ata_queued_cmd *qc)
{
if (qc->flags & ATA_QCFLAG_FAILED)
@@ -905,18 +951,21 @@
static void sata_fsl_error_intr(struct ata_port *ap)
{
- struct ata_link *link = &ap->link;
- struct ata_eh_info *ehi = &link->eh_info;
struct sata_fsl_host_priv *host_priv = ap->host->private_data;
void __iomem *hcr_base = host_priv->hcr_base;
- u32 hstatus, dereg, cereg = 0, SError = 0;
+ u32 hstatus, dereg=0, cereg = 0, SError = 0;
unsigned int err_mask = 0, action = 0;
- struct ata_queued_cmd *qc;
- int freeze = 0;
+ int freeze = 0, abort=0;
+ struct ata_link *link = NULL;
+ struct ata_queued_cmd *qc = NULL;
+ struct ata_eh_info *ehi;
hstatus = ioread32(hcr_base + HSTATUS);
cereg = ioread32(hcr_base + CE);
+ /* first, analyze and record host port events */
+ link = &ap->link;
+ ehi = &link->eh_info;
ata_ehi_clear_desc(ehi);
/*
@@ -926,12 +975,41 @@
sata_fsl_scr_read(ap, SCR_ERROR, &SError);
if (unlikely(SError & 0xFFFF0000)) {
sata_fsl_scr_write(ap, SCR_ERROR, SError);
- err_mask |= AC_ERR_ATA_BUS;
}
DPRINTK("error_intr,hStat=0x%x,CE=0x%x,DE =0x%x,SErr=0x%x\n",
hstatus, cereg, ioread32(hcr_base + DE), SError);
+ /* handle fatal errors */
+ if (hstatus & FATAL_ERROR_DECODE) {
+ ehi->err_mask |= AC_ERR_ATA_BUS;
+ ehi->action |= ATA_EH_SOFTRESET;
+
+ /*
+ * Ignore serror in case of fatal errors as we always want
+ * to do a soft-reset of the FSL SATA controller. Analyzing
+ * serror may cause libata to schedule a hard-reset action,
+ * and hard-reset currently does not do controller
+ * offline/online, causing command timeouts and leads to an
+ * un-recoverable state, hence make libATA ignore
+ * autopsy in case of fatal errors.
+ */
+
+ ehi->flags |= ATA_EHI_NO_AUTOPSY;
+
+ freeze = 1;
+ }
+
+ /* Handle PHYRDY change notification */
+ if (hstatus & INT_ON_PHYRDY_CHG) {
+ DPRINTK("SATA FSL: PHYRDY change indication\n");
+
+ /* Setup a soft-reset EH action */
+ ata_ehi_hotplugged(ehi);
+ ata_ehi_push_desc(ehi, "%s", "PHY RDY changed");
+ freeze = 1;
+ }
+
/* handle single device errors */
if (cereg) {
/*
@@ -943,58 +1021,68 @@
* clearing the device error, we can issue commands to the
* device to interrogate it to find the source of the error.
*/
- dereg = ioread32(hcr_base + DE);
- iowrite32(dereg, hcr_base + DE);
- iowrite32(cereg, hcr_base + CE);
+ abort = 1;
DPRINTK("single device error, CE=0x%x, DE=0x%x\n",
ioread32(hcr_base + CE), ioread32(hcr_base + DE));
- /*
- * We should consider this as non fatal error, and TF must
- * be updated as done below.
- */
- err_mask |= AC_ERR_DEV;
- }
+ /* find out the offending link and qc */
+ if (ap->nr_pmp_links) {
+ dereg = ioread32(hcr_base + DE);
+ iowrite32(dereg, hcr_base + DE);
+ iowrite32(cereg, hcr_base + CE);
- /* handle fatal errors */
- if (hstatus & FATAL_ERROR_DECODE) {
- err_mask |= AC_ERR_ATA_BUS;
- action |= ATA_EH_RESET;
- /* how will fatal error interrupts be completed ?? */
- freeze = 1;
- }
+ if (dereg < ap->nr_pmp_links) {
+ link = &ap->pmp_link[dereg];
+ ehi = &link->eh_info;
+ qc = ata_qc_from_tag(ap, link->active_tag);
+ /*
+ * We should consider this as non fatal error,
+ * and TF must be updated as done below.
+ */
- /* Handle PHYRDY change notification */
- if (hstatus & INT_ON_PHYRDY_CHG) {
- DPRINTK("SATA FSL: PHYRDY change indication\n");
+ err_mask |= AC_ERR_DEV;
- /* Setup a soft-reset EH action */
- ata_ehi_hotplugged(ehi);
- freeze = 1;
+ } else {
+ err_mask |= AC_ERR_HSM;
+ action |= ATA_EH_HARDRESET;
+ freeze = 1;
+ }
+ } else {
+ dereg = ioread32(hcr_base + DE);
+ iowrite32(dereg, hcr_base + DE);
+ iowrite32(cereg, hcr_base + CE);
+
+ qc = ata_qc_from_tag(ap, link->active_tag);
+ /*
+ * We should consider this as non fatal error,
+ * and TF must be updated as done below.
+ */
+ err_mask |= AC_ERR_DEV;
+ }
}
/* record error info */
- qc = ata_qc_from_tag(ap, link->active_tag);
-
- if (qc)
+ if (qc) {
qc->err_mask |= err_mask;
- else
+ } else
ehi->err_mask |= err_mask;
ehi->action |= action;
- ehi->serror |= SError;
/* freeze or abort */
if (freeze)
ata_port_freeze(ap);
- else
- ata_port_abort(ap);
+ else if (abort) {
+ if (qc)
+ ata_link_abort(qc->dev->link);
+ else
+ ata_port_abort(ap);
+ }
}
static void sata_fsl_host_intr(struct ata_port *ap)
{
- struct ata_link *link = &ap->link;
struct sata_fsl_host_priv *host_priv = ap->host->private_data;
void __iomem *hcr_base = host_priv->hcr_base;
u32 hstatus, qc_active = 0;
@@ -1017,10 +1105,19 @@
return;
}
- if (link->sactive) { /* only true for NCQ commands */
+ /* Read command completed register */
+ qc_active = ioread32(hcr_base + CC);
+
+ VPRINTK("Status of all queues :\n");
+ VPRINTK("qc_active/CC = 0x%x, CA = 0x%x, CE=0x%x,CQ=0x%x,apqa=0x%x\n",
+ qc_active,
+ ioread32(hcr_base + CA),
+ ioread32(hcr_base + CE),
+ ioread32(hcr_base + CQ),
+ ap->qc_active);
+
+ if (qc_active & ap->qc_active) {
int i;
- /* Read command completed register */
- qc_active = ioread32(hcr_base + CC);
/* clear CC bit, this will also complete the interrupt */
iowrite32(qc_active, hcr_base + CC);
@@ -1032,8 +1129,9 @@
for (i = 0; i < SATA_FSL_QUEUE_DEPTH; i++) {
if (qc_active & (1 << i)) {
qc = ata_qc_from_tag(ap, i);
- if (qc)
+ if (qc) {
ata_qc_complete(qc);
+ }
DPRINTK
("completing ncq cmd,tag=%d,CC=0x%x,CA=0x%x\n",
i, ioread32(hcr_base + CC),
@@ -1042,19 +1140,21 @@
}
return;
- } else if (ap->qc_active) {
+ } else if ((ap->qc_active & (1 << ATA_TAG_INTERNAL))) {
iowrite32(1, hcr_base + CC);
- qc = ata_qc_from_tag(ap, link->active_tag);
+ qc = ata_qc_from_tag(ap, ATA_TAG_INTERNAL);
- DPRINTK("completing non-ncq cmd, tag=%d,CC=0x%x\n",
- link->active_tag, ioread32(hcr_base + CC));
+ DPRINTK("completing non-ncq cmd, CC=0x%x\n",
+ ioread32(hcr_base + CC));
- if (qc)
+ if (qc) {
ata_qc_complete(qc);
+ }
} else {
/* Spurious Interrupt!! */
DPRINTK("spurious interrupt!!, CC = 0x%x\n",
ioread32(hcr_base + CC));
+ iowrite32(qc_active, hcr_base + CC);
return;
}
}
@@ -1130,9 +1230,6 @@
iowrite32(0x00000FFFF, hcr_base + CE);
iowrite32(0x00000FFFF, hcr_base + DE);
- /* initially assuming no Port multiplier, set CQPMP to 0 */
- iowrite32(0x0, hcr_base + CQPMP);
-
/*
* host controller will be brought on-line, during xx_port_start()
* callback, that should also initiate the OOB, COMINIT sequence
@@ -1154,8 +1251,8 @@
.dma_boundary = ATA_DMA_BOUNDARY,
};
-static const struct ata_port_operations sata_fsl_ops = {
- .inherits = &sata_port_ops,
+static struct ata_port_operations sata_fsl_ops = {
+ .inherits = &sata_pmp_port_ops,
.qc_prep = sata_fsl_qc_prep,
.qc_issue = sata_fsl_qc_issue,
@@ -1168,10 +1265,15 @@
.thaw = sata_fsl_thaw,
.prereset = sata_fsl_prereset,
.softreset = sata_fsl_softreset,
+ .pmp_softreset = sata_fsl_softreset,
+ .error_handler = sata_fsl_error_handler,
.post_internal_cmd = sata_fsl_post_internal_cmd,
.port_start = sata_fsl_port_start,
.port_stop = sata_fsl_port_stop,
+
+ .pmp_attach = sata_fsl_pmp_attach,
+ .pmp_detach = sata_fsl_pmp_detach,
};
static const struct ata_port_info sata_fsl_port_info[] = {
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index bb73b22..60391e9 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -72,7 +72,7 @@
#include <linux/libata.h>
#define DRV_NAME "sata_mv"
-#define DRV_VERSION "1.20"
+#define DRV_VERSION "1.24"
enum {
/* BAR's are enumerated in terms of pci_resource_start() terms */
@@ -122,14 +122,17 @@
/* Host Flags */
MV_FLAG_DUAL_HC = (1 << 30), /* two SATA Host Controllers */
MV_FLAG_IRQ_COALESCE = (1 << 29), /* IRQ coalescing capability */
- /* SoC integrated controllers, no PCI interface */
- MV_FLAG_SOC = (1 << 28),
MV_COMMON_FLAGS = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
ATA_FLAG_MMIO | ATA_FLAG_NO_ATAPI |
ATA_FLAG_PIO_POLLING,
+
MV_6XXX_FLAGS = MV_FLAG_IRQ_COALESCE,
+ MV_GENIIE_FLAGS = MV_COMMON_FLAGS | MV_6XXX_FLAGS |
+ ATA_FLAG_PMP | ATA_FLAG_ACPI_SATA |
+ ATA_FLAG_NCQ | ATA_FLAG_AN,
+
CRQB_FLAG_READ = (1 << 0),
CRQB_TAG_SHIFT = 1,
CRQB_IOID_SHIFT = 6, /* CRQB Gen-II/IIE IO Id shift */
@@ -197,13 +200,6 @@
HC_MAIN_RSVD = (0x7f << 25), /* bits 31-25 */
HC_MAIN_RSVD_5 = (0x1fff << 19), /* bits 31-19 */
HC_MAIN_RSVD_SOC = (0x3fffffb << 6), /* bits 31-9, 7-6 */
- HC_MAIN_MASKED_IRQS = (TRAN_LO_DONE | TRAN_HI_DONE |
- PORTS_0_3_COAL_DONE | PORTS_4_7_COAL_DONE |
- PORTS_0_7_COAL_DONE | GPIO_INT | TWSI_INT |
- HC_MAIN_RSVD),
- HC_MAIN_MASKED_IRQS_5 = (PORTS_0_3_COAL_DONE | PORTS_4_7_COAL_DONE |
- HC_MAIN_RSVD_5),
- HC_MAIN_MASKED_IRQS_SOC = (PORTS_0_3_COAL_DONE | HC_MAIN_RSVD_SOC),
/* SATAHC registers */
HC_CFG_OFS = 0,
@@ -221,12 +217,18 @@
SATA_STATUS_OFS = 0x300, /* ctrl, err regs follow status */
SATA_ACTIVE_OFS = 0x350,
SATA_FIS_IRQ_CAUSE_OFS = 0x364,
+ SATA_FIS_IRQ_AN = (1 << 9), /* async notification */
LTMODE_OFS = 0x30c,
LTMODE_BIT8 = (1 << 8), /* unknown, but necessary */
PHY_MODE3 = 0x310,
PHY_MODE4 = 0x314,
+ PHY_MODE4_CFG_MASK = 0x00000003, /* phy internal config field */
+ PHY_MODE4_CFG_VALUE = 0x00000001, /* phy internal config field */
+ PHY_MODE4_RSVD_ZEROS = 0x5de3fffa, /* Gen2e always write zeros */
+ PHY_MODE4_RSVD_ONES = 0x00000005, /* Gen2e always write ones */
+
PHY_MODE2 = 0x330,
SATA_IFCTL_OFS = 0x344,
SATA_TESTCTL_OFS = 0x348,
@@ -357,12 +359,12 @@
MV_HP_ERRATA_50XXB2 = (1 << 2),
MV_HP_ERRATA_60X1B2 = (1 << 3),
MV_HP_ERRATA_60X1C0 = (1 << 4),
- MV_HP_ERRATA_XX42A0 = (1 << 5),
MV_HP_GEN_I = (1 << 6), /* Generation I: 50xx */
MV_HP_GEN_II = (1 << 7), /* Generation II: 60xx */
MV_HP_GEN_IIE = (1 << 8), /* Generation IIE: 6042/7042 */
MV_HP_PCIE = (1 << 9), /* PCIe bus/regs: 7042 */
MV_HP_CUT_THROUGH = (1 << 10), /* can use EDMA cut-through */
+ MV_HP_FLAG_SOC = (1 << 11), /* SystemOnChip, no PCI */
/* Port private flags (pp_flags) */
MV_PP_FLAG_EDMA_EN = (1 << 0), /* is EDMA engine enabled? */
@@ -375,7 +377,7 @@
#define IS_GEN_II(hpriv) ((hpriv)->hp_flags & MV_HP_GEN_II)
#define IS_GEN_IIE(hpriv) ((hpriv)->hp_flags & MV_HP_GEN_IIE)
#define IS_PCIE(hpriv) ((hpriv)->hp_flags & MV_HP_PCIE)
-#define HAS_PCI(host) (!((host)->ports[0]->flags & MV_FLAG_SOC))
+#define IS_SOC(hpriv) ((hpriv)->hp_flags & MV_HP_FLAG_SOC)
#define WINDOW_CTRL(i) (0x20030 + ((i) << 4))
#define WINDOW_BASE(i) (0x20034 + ((i) << 4))
@@ -459,6 +461,7 @@
struct mv_host_priv {
u32 hp_flags;
+ u32 main_irq_mask;
struct mv_port_signal signal[8];
const struct mv_hw_ops *ops;
int n_ports;
@@ -640,25 +643,19 @@
.port_ops = &mv6_ops,
},
{ /* chip_6042 */
- .flags = MV_COMMON_FLAGS | MV_6XXX_FLAGS |
- ATA_FLAG_PMP | ATA_FLAG_ACPI_SATA |
- ATA_FLAG_NCQ,
+ .flags = MV_GENIIE_FLAGS,
.pio_mask = 0x1f, /* pio0-4 */
.udma_mask = ATA_UDMA6,
.port_ops = &mv_iie_ops,
},
{ /* chip_7042 */
- .flags = MV_COMMON_FLAGS | MV_6XXX_FLAGS |
- ATA_FLAG_PMP | ATA_FLAG_ACPI_SATA |
- ATA_FLAG_NCQ,
+ .flags = MV_GENIIE_FLAGS,
.pio_mask = 0x1f, /* pio0-4 */
.udma_mask = ATA_UDMA6,
.port_ops = &mv_iie_ops,
},
{ /* chip_soc */
- .flags = MV_COMMON_FLAGS | MV_6XXX_FLAGS |
- ATA_FLAG_PMP | ATA_FLAG_ACPI_SATA |
- ATA_FLAG_NCQ | MV_FLAG_SOC,
+ .flags = MV_GENIIE_FLAGS,
.pio_mask = 0x1f, /* pio0-4 */
.udma_mask = ATA_UDMA6,
.port_ops = &mv_iie_ops,
@@ -818,12 +815,7 @@
writel((pp->crqb_dma >> 16) >> 16, port_mmio + EDMA_REQ_Q_BASE_HI_OFS);
writelfl((pp->crqb_dma & EDMA_REQ_Q_BASE_LO_MASK) | index,
port_mmio + EDMA_REQ_Q_IN_PTR_OFS);
-
- if (hpriv->hp_flags & MV_HP_ERRATA_XX42A0)
- writelfl((pp->crqb_dma & 0xffffffff) | index,
- port_mmio + EDMA_REQ_Q_OUT_PTR_OFS);
- else
- writelfl(index, port_mmio + EDMA_REQ_Q_OUT_PTR_OFS);
+ writelfl(index, port_mmio + EDMA_REQ_Q_OUT_PTR_OFS);
/*
* initialize response queue
@@ -833,17 +825,38 @@
WARN_ON(pp->crpb_dma & 0xff);
writel((pp->crpb_dma >> 16) >> 16, port_mmio + EDMA_RSP_Q_BASE_HI_OFS);
-
- if (hpriv->hp_flags & MV_HP_ERRATA_XX42A0)
- writelfl((pp->crpb_dma & 0xffffffff) | index,
- port_mmio + EDMA_RSP_Q_IN_PTR_OFS);
- else
- writelfl(index, port_mmio + EDMA_RSP_Q_IN_PTR_OFS);
-
+ writelfl(index, port_mmio + EDMA_RSP_Q_IN_PTR_OFS);
writelfl((pp->crpb_dma & EDMA_RSP_Q_BASE_LO_MASK) | index,
port_mmio + EDMA_RSP_Q_OUT_PTR_OFS);
}
+static void mv_set_main_irq_mask(struct ata_host *host,
+ u32 disable_bits, u32 enable_bits)
+{
+ struct mv_host_priv *hpriv = host->private_data;
+ u32 old_mask, new_mask;
+
+ old_mask = hpriv->main_irq_mask;
+ new_mask = (old_mask & ~disable_bits) | enable_bits;
+ if (new_mask != old_mask) {
+ hpriv->main_irq_mask = new_mask;
+ writelfl(new_mask, hpriv->main_irq_mask_addr);
+ }
+}
+
+static void mv_enable_port_irqs(struct ata_port *ap,
+ unsigned int port_bits)
+{
+ unsigned int shift, hardport, port = ap->port_no;
+ u32 disable_bits, enable_bits;
+
+ MV_PORT_TO_SHIFT_AND_HARDPORT(port, shift, hardport);
+
+ disable_bits = (DONE_IRQ | ERR_IRQ) << shift;
+ enable_bits = port_bits << shift;
+ mv_set_main_irq_mask(ap->host, disable_bits, enable_bits);
+}
+
/**
* mv_start_dma - Enable eDMA engine
* @base: port base address
@@ -886,9 +899,11 @@
mv_edma_cfg(ap, want_ncq);
/* clear FIS IRQ Cause */
- writelfl(0, port_mmio + SATA_FIS_IRQ_CAUSE_OFS);
+ if (IS_GEN_IIE(hpriv))
+ writelfl(0, port_mmio + SATA_FIS_IRQ_CAUSE_OFS);
mv_set_edma_ptrs(port_mmio, hpriv, pp);
+ mv_enable_port_irqs(ap, DONE_IRQ|ERR_IRQ);
writelfl(EDMA_EN, port_mmio + EDMA_CMD_OFS);
pp->pp_flags |= MV_PP_FLAG_EDMA_EN;
@@ -1231,7 +1246,7 @@
cfg |= (1 << 23); /* do not mask PM field in rx'd FIS */
cfg |= (1 << 22); /* enab 4-entry host queue cache */
- if (HAS_PCI(ap->host))
+ if (!IS_SOC(hpriv))
cfg |= (1 << 18); /* enab early completion */
if (hpriv->hp_flags & MV_HP_CUT_THROUGH)
cfg |= (1 << 17); /* enab cut-thru (dis stor&forwrd) */
@@ -1341,6 +1356,7 @@
static void mv_port_stop(struct ata_port *ap)
{
mv_stop_edma(ap);
+ mv_enable_port_irqs(ap, 0);
mv_port_free_dma_mem(ap);
}
@@ -1582,6 +1598,7 @@
* shadow block, etc registers.
*/
mv_stop_edma(ap);
+ mv_enable_port_irqs(ap, ERR_IRQ);
mv_pmp_select(ap, qc->dev->link->pmp);
return ata_sff_qc_issue(qc);
}
@@ -1670,6 +1687,18 @@
}
}
+static int mv_req_q_empty(struct ata_port *ap)
+{
+ void __iomem *port_mmio = mv_ap_base(ap);
+ u32 in_ptr, out_ptr;
+
+ in_ptr = (readl(port_mmio + EDMA_REQ_Q_IN_PTR_OFS)
+ >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK;
+ out_ptr = (readl(port_mmio + EDMA_REQ_Q_OUT_PTR_OFS)
+ >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK;
+ return (in_ptr == out_ptr); /* 1 == queue_is_empty */
+}
+
static int mv_handle_fbs_ncq_dev_err(struct ata_port *ap)
{
struct mv_port_priv *pp = ap->private_data;
@@ -1703,7 +1732,7 @@
ap->qc_active, failed_links,
ap->nr_active_links);
- if (ap->nr_active_links <= failed_links) {
+ if (ap->nr_active_links <= failed_links && mv_req_q_empty(ap)) {
mv_process_crpb_entries(ap, pp);
mv_stop_edma(ap);
mv_eh_freeze(ap);
@@ -1812,6 +1841,7 @@
{
void __iomem *port_mmio = mv_ap_base(ap);
u32 edma_err_cause, eh_freeze_mask, serr = 0;
+ u32 fis_cause = 0;
struct mv_port_priv *pp = ap->private_data;
struct mv_host_priv *hpriv = ap->host->private_data;
unsigned int action = 0, err_mask = 0;
@@ -1821,16 +1851,19 @@
/*
* Read and clear the SError and err_cause bits.
+ * For GenIIe, if EDMA_ERR_TRANS_IRQ_7 is set, we also must read/clear
+ * the FIS_IRQ_CAUSE register before clearing edma_err_cause.
*/
sata_scr_read(&ap->link, SCR_ERROR, &serr);
sata_scr_write_flush(&ap->link, SCR_ERROR, serr);
edma_err_cause = readl(port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
+ if (IS_GEN_IIE(hpriv) && (edma_err_cause & EDMA_ERR_TRANS_IRQ_7)) {
+ fis_cause = readl(port_mmio + SATA_FIS_IRQ_CAUSE_OFS);
+ writelfl(~fis_cause, port_mmio + SATA_FIS_IRQ_CAUSE_OFS);
+ }
writelfl(~edma_err_cause, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
- ata_port_printk(ap, KERN_INFO, "%s: err_cause=%08x pp_flags=0x%x\n",
- __func__, edma_err_cause, pp->pp_flags);
-
if (edma_err_cause & EDMA_ERR_DEV) {
/*
* Device errors during FIS-based switching operation
@@ -1844,6 +1877,18 @@
ata_ehi_clear_desc(ehi);
ata_ehi_push_desc(ehi, "edma_err_cause=%08x pp_flags=%08x",
edma_err_cause, pp->pp_flags);
+
+ if (IS_GEN_IIE(hpriv) && (edma_err_cause & EDMA_ERR_TRANS_IRQ_7)) {
+ ata_ehi_push_desc(ehi, "fis_cause=%08x", fis_cause);
+ if (fis_cause & SATA_FIS_IRQ_AN) {
+ u32 ec = edma_err_cause &
+ ~(EDMA_ERR_TRANS_IRQ_7 | EDMA_ERR_IRQ_TRANSIENT);
+ sata_async_notification(ap);
+ if (!ec)
+ return; /* Just an AN; no need for the nukes */
+ ata_ehi_push_desc(ehi, "SDB notify");
+ }
+ }
/*
* All generations share these EDMA error cause bits:
*/
@@ -2162,20 +2207,20 @@
struct ata_host *host = dev_instance;
struct mv_host_priv *hpriv = host->private_data;
unsigned int handled = 0;
- u32 main_irq_cause, main_irq_mask;
+ u32 main_irq_cause, pending_irqs;
spin_lock(&host->lock);
main_irq_cause = readl(hpriv->main_irq_cause_addr);
- main_irq_mask = readl(hpriv->main_irq_mask_addr);
+ pending_irqs = main_irq_cause & hpriv->main_irq_mask;
/*
* Deal with cases where we either have nothing pending, or have read
* a bogus register value which can indicate HW removal or PCI fault.
*/
- if ((main_irq_cause & main_irq_mask) && (main_irq_cause != 0xffffffffU)) {
- if (unlikely((main_irq_cause & PCI_ERR) && HAS_PCI(host)))
+ if (pending_irqs && main_irq_cause != 0xffffffffU) {
+ if (unlikely((pending_irqs & PCI_ERR) && !IS_SOC(hpriv)))
handled = mv_pci_error(host, hpriv->base);
else
- handled = mv_host_intr(host, main_irq_cause);
+ handled = mv_host_intr(host, pending_irqs);
}
spin_unlock(&host->lock);
return IRQ_RETVAL(handled);
@@ -2373,7 +2418,6 @@
ZERO(MV_PCI_DISC_TIMER);
ZERO(MV_PCI_MSI_TRIGGER);
writel(0x000100ff, mmio + MV_PCI_XBAR_TMOUT_OFS);
- ZERO(PCI_HC_MAIN_IRQ_MASK_OFS);
ZERO(MV_PCI_SERR_MASK);
ZERO(hpriv->irq_cause_ofs);
ZERO(hpriv->irq_mask_ofs);
@@ -2495,7 +2539,7 @@
hp_flags & (MV_HP_ERRATA_60X1B2 | MV_HP_ERRATA_60X1C0);
int fix_phy_mode4 =
hp_flags & (MV_HP_ERRATA_60X1B2 | MV_HP_ERRATA_60X1C0);
- u32 m2, tmp;
+ u32 m2, m3;
if (fix_phy_mode2) {
m2 = readl(port_mmio + PHY_MODE2);
@@ -2512,28 +2556,36 @@
udelay(200);
}
- /* who knows what this magic does */
- tmp = readl(port_mmio + PHY_MODE3);
- tmp &= ~0x7F800000;
- tmp |= 0x2A800000;
- writel(tmp, port_mmio + PHY_MODE3);
+ /*
+ * Gen-II/IIe PHY_MODE3 errata RM#2:
+ * Achieves better receiver noise performance than the h/w default:
+ */
+ m3 = readl(port_mmio + PHY_MODE3);
+ m3 = (m3 & 0x1f) | (0x5555601 << 5);
+
+ /* Guideline 88F5182 (GL# SATA-S11) */
+ if (IS_SOC(hpriv))
+ m3 &= ~0x1c;
if (fix_phy_mode4) {
- u32 m4;
-
- m4 = readl(port_mmio + PHY_MODE4);
-
- if (hp_flags & MV_HP_ERRATA_60X1B2)
- tmp = readl(port_mmio + PHY_MODE3);
-
- /* workaround for errata FEr SATA#10 (part 1) */
- m4 = (m4 & ~(1 << 1)) | (1 << 0);
-
+ u32 m4 = readl(port_mmio + PHY_MODE4);
+ /*
+ * Enforce reserved-bit restrictions on GenIIe devices only.
+ * For earlier chipsets, force only the internal config field
+ * (workaround for errata FEr SATA#10 part 1).
+ */
+ if (IS_GEN_IIE(hpriv))
+ m4 = (m4 & ~PHY_MODE4_RSVD_ZEROS) | PHY_MODE4_RSVD_ONES;
+ else
+ m4 = (m4 & ~PHY_MODE4_CFG_MASK) | PHY_MODE4_CFG_VALUE;
writel(m4, port_mmio + PHY_MODE4);
-
- if (hp_flags & MV_HP_ERRATA_60X1B2)
- writel(tmp, port_mmio + PHY_MODE3);
}
+ /*
+ * Workaround for 60x1-B2 errata SATA#13:
+ * Any write to PHY_MODE4 (above) may corrupt PHY_MODE3,
+ * so we must always rewrite PHY_MODE3 after PHY_MODE4.
+ */
+ writel(m3, port_mmio + PHY_MODE3);
/* Revert values of pre-emphasis and signal amps to the saved ones */
m2 = readl(port_mmio + PHY_MODE2);
@@ -2728,6 +2780,7 @@
rc = sata_link_hardreset(link, timing, deadline + extra,
&online, NULL);
+ rc = online ? -EAGAIN : rc;
if (rc)
return rc;
sata_scr_read(link, SCR_STATUS, &sstatus);
@@ -2744,32 +2797,18 @@
static void mv_eh_freeze(struct ata_port *ap)
{
- struct mv_host_priv *hpriv = ap->host->private_data;
- unsigned int shift, hardport, port = ap->port_no;
- u32 main_irq_mask;
-
- /* FIXME: handle coalescing completion events properly */
-
mv_stop_edma(ap);
- MV_PORT_TO_SHIFT_AND_HARDPORT(port, shift, hardport);
-
- /* disable assertion of portN err, done events */
- main_irq_mask = readl(hpriv->main_irq_mask_addr);
- main_irq_mask &= ~((DONE_IRQ | ERR_IRQ) << shift);
- writelfl(main_irq_mask, hpriv->main_irq_mask_addr);
+ mv_enable_port_irqs(ap, 0);
}
static void mv_eh_thaw(struct ata_port *ap)
{
struct mv_host_priv *hpriv = ap->host->private_data;
- unsigned int shift, hardport, port = ap->port_no;
+ unsigned int port = ap->port_no;
+ unsigned int hardport = mv_hardport_from_port(port);
void __iomem *hc_mmio = mv_hc_base_from_port(hpriv->base, port);
void __iomem *port_mmio = mv_ap_base(ap);
- u32 main_irq_mask, hc_irq_cause;
-
- /* FIXME: handle coalescing completion events properly */
-
- MV_PORT_TO_SHIFT_AND_HARDPORT(port, shift, hardport);
+ u32 hc_irq_cause;
/* clear EDMA errors on this port */
writel(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
@@ -2779,10 +2818,7 @@
hc_irq_cause &= ~((DEV_IRQ | DMA_IRQ) << hardport);
writelfl(hc_irq_cause, hc_mmio + HC_IRQ_CAUSE_OFS);
- /* enable assertion of portN err, done events */
- main_irq_mask = readl(hpriv->main_irq_mask_addr);
- main_irq_mask |= ((DONE_IRQ | ERR_IRQ) << shift);
- writelfl(main_irq_mask, hpriv->main_irq_mask_addr);
+ mv_enable_port_irqs(ap, ERR_IRQ);
}
/**
@@ -2840,7 +2876,7 @@
void __iomem *mmio = hpriv->base;
u32 reg;
- if (!HAS_PCI(host) || !IS_PCIE(hpriv))
+ if (IS_SOC(hpriv) || !IS_PCIE(hpriv))
return 0; /* not PCI-X capable */
reg = readl(mmio + MV_PCI_MODE_OFS);
if ((reg & MV_PCI_MODE_MASK) == 0)
@@ -2967,10 +3003,7 @@
hp_flags |= MV_HP_CUT_THROUGH;
switch (pdev->revision) {
- case 0x0:
- hp_flags |= MV_HP_ERRATA_XX42A0;
- break;
- case 0x1:
+ case 0x2: /* Rev.B0: the first/only public release */
hp_flags |= MV_HP_ERRATA_60X1C0;
break;
default:
@@ -2982,7 +3015,7 @@
break;
case chip_soc:
hpriv->ops = &mv_soc_ops;
- hp_flags |= MV_HP_ERRATA_60X1C0;
+ hp_flags |= MV_HP_FLAG_SOC | MV_HP_ERRATA_60X1C0;
break;
default:
@@ -3026,16 +3059,16 @@
if (rc)
goto done;
- if (HAS_PCI(host)) {
- hpriv->main_irq_cause_addr = mmio + PCI_HC_MAIN_IRQ_CAUSE_OFS;
- hpriv->main_irq_mask_addr = mmio + PCI_HC_MAIN_IRQ_MASK_OFS;
- } else {
+ if (IS_SOC(hpriv)) {
hpriv->main_irq_cause_addr = mmio + SOC_HC_MAIN_IRQ_CAUSE_OFS;
hpriv->main_irq_mask_addr = mmio + SOC_HC_MAIN_IRQ_MASK_OFS;
+ } else {
+ hpriv->main_irq_cause_addr = mmio + PCI_HC_MAIN_IRQ_CAUSE_OFS;
+ hpriv->main_irq_mask_addr = mmio + PCI_HC_MAIN_IRQ_MASK_OFS;
}
/* global interrupt mask: 0 == mask everything */
- writel(0, hpriv->main_irq_mask_addr);
+ mv_set_main_irq_mask(host, ~0, 0);
n_hc = mv_get_hc_count(host->ports[0]->flags);
@@ -3057,7 +3090,7 @@
mv_port_init(&ap->ioaddr, port_mmio);
#ifdef CONFIG_PCI
- if (HAS_PCI(host)) {
+ if (!IS_SOC(hpriv)) {
unsigned int offset = port_mmio - mmio;
ata_port_pbar_desc(ap, MV_PRIMARY_BAR, -1, "mmio");
ata_port_pbar_desc(ap, MV_PRIMARY_BAR, offset, "port");
@@ -3077,31 +3110,18 @@
writelfl(0, hc_mmio + HC_IRQ_CAUSE_OFS);
}
- if (HAS_PCI(host)) {
+ if (!IS_SOC(hpriv)) {
/* Clear any currently outstanding host interrupt conditions */
writelfl(0, mmio + hpriv->irq_cause_ofs);
/* and unmask interrupt generation for host regs */
writelfl(hpriv->unmask_all_irqs, mmio + hpriv->irq_mask_ofs);
- if (IS_GEN_I(hpriv))
- writelfl(~HC_MAIN_MASKED_IRQS_5,
- hpriv->main_irq_mask_addr);
- else
- writelfl(~HC_MAIN_MASKED_IRQS,
- hpriv->main_irq_mask_addr);
- VPRINTK("HC MAIN IRQ cause/mask=0x%08x/0x%08x "
- "PCI int cause/mask=0x%08x/0x%08x\n",
- readl(hpriv->main_irq_cause_addr),
- readl(hpriv->main_irq_mask_addr),
- readl(mmio + hpriv->irq_cause_ofs),
- readl(mmio + hpriv->irq_mask_ofs));
- } else {
- writelfl(~HC_MAIN_MASKED_IRQS_SOC,
- hpriv->main_irq_mask_addr);
- VPRINTK("HC MAIN IRQ cause/mask=0x%08x/0x%08x\n",
- readl(hpriv->main_irq_cause_addr),
- readl(hpriv->main_irq_mask_addr));
+ /*
+ * enable only global host interrupts for now.
+ * The per-port interrupts get done later as ports are set up.
+ */
+ mv_set_main_irq_mask(host, 0, PCI_ERR);
}
done:
return rc;
diff --git a/drivers/ata/sata_promise.c b/drivers/ata/sata_promise.c
index 5a10dc5..030665b 100644
--- a/drivers/ata/sata_promise.c
+++ b/drivers/ata/sata_promise.c
@@ -53,7 +53,15 @@
PDC_MMIO_BAR = 3,
PDC_MAX_PRD = LIBATA_MAX_PRD - 1, /* -1 for ASIC PRD bug workaround */
- /* register offsets */
+ /* host register offsets (from host->iomap[PDC_MMIO_BAR]) */
+ PDC_INT_SEQMASK = 0x40, /* Mask of asserted SEQ INTs */
+ PDC_FLASH_CTL = 0x44, /* Flash control register */
+ PDC_SATA_PLUG_CSR = 0x6C, /* SATA Plug control/status reg */
+ PDC2_SATA_PLUG_CSR = 0x60, /* SATAII Plug control/status reg */
+ PDC_TBG_MODE = 0x41C, /* TBG mode (not SATAII) */
+ PDC_SLEW_CTL = 0x470, /* slew rate control reg (not SATAII) */
+
+ /* per-port ATA register offsets (from ap->ioaddr.cmd_addr) */
PDC_FEATURE = 0x04, /* Feature/Error reg (per port) */
PDC_SECTOR_COUNT = 0x08, /* Sector count reg (per port) */
PDC_SECTOR_NUMBER = 0x0C, /* Sector number reg (per port) */
@@ -63,14 +71,11 @@
PDC_COMMAND = 0x1C, /* Command/status reg (per port) */
PDC_ALTSTATUS = 0x38, /* Alternate-status/device-control reg (per port) */
PDC_PKT_SUBMIT = 0x40, /* Command packet pointer addr */
- PDC_INT_SEQMASK = 0x40, /* Mask of asserted SEQ INTs */
- PDC_FLASH_CTL = 0x44, /* Flash control register */
PDC_GLOBAL_CTL = 0x48, /* Global control/status (per port) */
PDC_CTLSTAT = 0x60, /* IDE control and status (per port) */
- PDC_SATA_PLUG_CSR = 0x6C, /* SATA Plug control/status reg */
- PDC2_SATA_PLUG_CSR = 0x60, /* SATAII Plug control/status reg */
- PDC_TBG_MODE = 0x41C, /* TBG mode (not SATAII) */
- PDC_SLEW_CTL = 0x470, /* slew rate control reg (not SATAII) */
+
+ /* per-port SATA register offsets (from ap->ioaddr.scr_addr) */
+ PDC_PHYMODE4 = 0x14,
/* PDC_GLOBAL_CTL bit definitions */
PDC_PH_ERR = (1 << 8), /* PCI error while loading packet */
@@ -134,7 +139,7 @@
static int pdc_sata_scr_read(struct ata_port *ap, unsigned int sc_reg, u32 *val);
static int pdc_sata_scr_write(struct ata_port *ap, unsigned int sc_reg, u32 val);
-static int pdc_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *ent);
+static int pdc_ata_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
static int pdc_common_port_start(struct ata_port *ap);
static int pdc_sata_port_start(struct ata_port *ap);
static void pdc_qc_prep(struct ata_queued_cmd *qc);
@@ -332,12 +337,12 @@
/* fix up PHYMODE4 align timing */
if (ap->flags & PDC_FLAG_GEN_II) {
- void __iomem *mmio = ap->ioaddr.scr_addr;
+ void __iomem *sata_mmio = ap->ioaddr.scr_addr;
unsigned int tmp;
- tmp = readl(mmio + 0x014);
+ tmp = readl(sata_mmio + PDC_PHYMODE4);
tmp = (tmp & ~3) | 1; /* set bits 1:0 = 0:1 */
- writel(tmp, mmio + 0x014);
+ writel(tmp, sata_mmio + PDC_PHYMODE4);
}
return 0;
@@ -345,32 +350,32 @@
static void pdc_reset_port(struct ata_port *ap)
{
- void __iomem *mmio = ap->ioaddr.cmd_addr + PDC_CTLSTAT;
+ void __iomem *ata_ctlstat_mmio = ap->ioaddr.cmd_addr + PDC_CTLSTAT;
unsigned int i;
u32 tmp;
for (i = 11; i > 0; i--) {
- tmp = readl(mmio);
+ tmp = readl(ata_ctlstat_mmio);
if (tmp & PDC_RESET)
break;
udelay(100);
tmp |= PDC_RESET;
- writel(tmp, mmio);
+ writel(tmp, ata_ctlstat_mmio);
}
tmp &= ~PDC_RESET;
- writel(tmp, mmio);
- readl(mmio); /* flush */
+ writel(tmp, ata_ctlstat_mmio);
+ readl(ata_ctlstat_mmio); /* flush */
}
static int pdc_pata_cable_detect(struct ata_port *ap)
{
u8 tmp;
- void __iomem *mmio = ap->ioaddr.cmd_addr + PDC_CTLSTAT + 0x03;
+ void __iomem *ata_mmio = ap->ioaddr.cmd_addr;
- tmp = readb(mmio);
+ tmp = readb(ata_mmio + PDC_CTLSTAT + 3);
if (tmp & 0x01)
return ATA_CBL_PATA40;
return ATA_CBL_PATA80;
@@ -557,31 +562,25 @@
switch (qc->tf.protocol) {
case ATA_PROT_DMA:
pdc_fill_sg(qc);
- /* fall through */
-
+ /*FALLTHROUGH*/
case ATA_PROT_NODATA:
i = pdc_pkt_header(&qc->tf, qc->ap->prd_dma,
qc->dev->devno, pp->pkt);
-
if (qc->tf.flags & ATA_TFLAG_LBA48)
i = pdc_prep_lba48(&qc->tf, pp->pkt, i);
else
i = pdc_prep_lba28(&qc->tf, pp->pkt, i);
-
pdc_pkt_footer(&qc->tf, pp->pkt, i);
break;
-
case ATAPI_PROT_PIO:
pdc_fill_sg(qc);
break;
-
case ATAPI_PROT_DMA:
pdc_fill_sg(qc);
/*FALLTHROUGH*/
case ATAPI_PROT_NODATA:
pdc_atapi_pkt(qc);
break;
-
default:
break;
}
@@ -611,7 +610,7 @@
unsigned int nr_ports = pdc_sata_nr_ports(ap);
unsigned int i;
- for(i = 0; i < nr_ports && host->ports[i] != ap; ++i)
+ for (i = 0; i < nr_ports && host->ports[i] != ap; ++i)
;
BUG_ON(i >= nr_ports);
return pdc_port_no_to_ata_no(i, pdc_is_sataii_tx4(ap->flags));
@@ -624,14 +623,14 @@
static void pdc_freeze(struct ata_port *ap)
{
- void __iomem *mmio = ap->ioaddr.cmd_addr;
+ void __iomem *ata_mmio = ap->ioaddr.cmd_addr;
u32 tmp;
- tmp = readl(mmio + PDC_CTLSTAT);
+ tmp = readl(ata_mmio + PDC_CTLSTAT);
tmp |= PDC_IRQ_DISABLE;
tmp &= ~PDC_DMA_ENABLE;
- writel(tmp, mmio + PDC_CTLSTAT);
- readl(mmio + PDC_CTLSTAT); /* flush */
+ writel(tmp, ata_mmio + PDC_CTLSTAT);
+ readl(ata_mmio + PDC_CTLSTAT); /* flush */
}
static void pdc_sata_freeze(struct ata_port *ap)
@@ -659,17 +658,17 @@
static void pdc_thaw(struct ata_port *ap)
{
- void __iomem *mmio = ap->ioaddr.cmd_addr;
+ void __iomem *ata_mmio = ap->ioaddr.cmd_addr;
u32 tmp;
/* clear IRQ */
- readl(mmio + PDC_INT_SEQMASK);
+ readl(ata_mmio + PDC_COMMAND);
/* turn IRQ back on */
- tmp = readl(mmio + PDC_CTLSTAT);
+ tmp = readl(ata_mmio + PDC_CTLSTAT);
tmp &= ~PDC_IRQ_DISABLE;
- writel(tmp, mmio + PDC_CTLSTAT);
- readl(mmio + PDC_CTLSTAT); /* flush */
+ writel(tmp, ata_mmio + PDC_CTLSTAT);
+ readl(ata_mmio + PDC_CTLSTAT); /* flush */
}
static void pdc_sata_thaw(struct ata_port *ap)
@@ -743,11 +742,11 @@
ata_port_abort(ap);
}
-static inline unsigned int pdc_host_intr(struct ata_port *ap,
- struct ata_queued_cmd *qc)
+static unsigned int pdc_host_intr(struct ata_port *ap,
+ struct ata_queued_cmd *qc)
{
unsigned int handled = 0;
- void __iomem *port_mmio = ap->ioaddr.cmd_addr;
+ void __iomem *ata_mmio = ap->ioaddr.cmd_addr;
u32 port_status, err_mask;
err_mask = PDC_ERR_MASK;
@@ -755,7 +754,7 @@
err_mask &= ~PDC1_ERR_MASK;
else
err_mask &= ~PDC2_ERR_MASK;
- port_status = readl(port_mmio + PDC_GLOBAL_CTL);
+ port_status = readl(ata_mmio + PDC_GLOBAL_CTL);
if (unlikely(port_status & err_mask)) {
pdc_error_intr(ap, qc, port_status, err_mask);
return 1;
@@ -770,7 +769,6 @@
ata_qc_complete(qc);
handled = 1;
break;
-
default:
ap->stats.idle_irq++;
break;
@@ -781,10 +779,9 @@
static void pdc_irq_clear(struct ata_port *ap)
{
- struct ata_host *host = ap->host;
- void __iomem *mmio = host->iomap[PDC_MMIO_BAR];
+ void __iomem *ata_mmio = ap->ioaddr.cmd_addr;
- readl(mmio + PDC_INT_SEQMASK);
+ readl(ata_mmio + PDC_COMMAND);
}
static irqreturn_t pdc_interrupt(int irq, void *dev_instance)
@@ -794,7 +791,7 @@
u32 mask = 0;
unsigned int i, tmp;
unsigned int handled = 0;
- void __iomem *mmio_base;
+ void __iomem *host_mmio;
unsigned int hotplug_offset, ata_no;
u32 hotplug_status;
int is_sataii_tx4;
@@ -806,7 +803,7 @@
return IRQ_NONE;
}
- mmio_base = host->iomap[PDC_MMIO_BAR];
+ host_mmio = host->iomap[PDC_MMIO_BAR];
spin_lock(&host->lock);
@@ -815,26 +812,26 @@
hotplug_offset = PDC2_SATA_PLUG_CSR;
else
hotplug_offset = PDC_SATA_PLUG_CSR;
- hotplug_status = readl(mmio_base + hotplug_offset);
+ hotplug_status = readl(host_mmio + hotplug_offset);
if (hotplug_status & 0xff)
- writel(hotplug_status | 0xff, mmio_base + hotplug_offset);
+ writel(hotplug_status | 0xff, host_mmio + hotplug_offset);
hotplug_status &= 0xff; /* clear uninteresting bits */
/* reading should also clear interrupts */
- mask = readl(mmio_base + PDC_INT_SEQMASK);
+ mask = readl(host_mmio + PDC_INT_SEQMASK);
if (mask == 0xffffffff && hotplug_status == 0) {
VPRINTK("QUICK EXIT 2\n");
goto done_irq;
}
- mask &= 0xffff; /* only 16 tags possible */
+ mask &= 0xffff; /* only 16 SEQIDs possible */
if (mask == 0 && hotplug_status == 0) {
VPRINTK("QUICK EXIT 3\n");
goto done_irq;
}
- writel(mask, mmio_base + PDC_INT_SEQMASK);
+ writel(mask, host_mmio + PDC_INT_SEQMASK);
is_sataii_tx4 = pdc_is_sataii_tx4(host->ports[0]->flags);
@@ -875,23 +872,24 @@
return IRQ_RETVAL(handled);
}
-static inline void pdc_packet_start(struct ata_queued_cmd *qc)
+static void pdc_packet_start(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
struct pdc_port_priv *pp = ap->private_data;
- void __iomem *mmio = ap->host->iomap[PDC_MMIO_BAR];
+ void __iomem *host_mmio = ap->host->iomap[PDC_MMIO_BAR];
+ void __iomem *ata_mmio = ap->ioaddr.cmd_addr;
unsigned int port_no = ap->port_no;
u8 seq = (u8) (port_no + 1);
VPRINTK("ENTER, ap %p\n", ap);
- writel(0x00000001, mmio + (seq * 4));
- readl(mmio + (seq * 4)); /* flush */
+ writel(0x00000001, host_mmio + (seq * 4));
+ readl(host_mmio + (seq * 4)); /* flush */
pp->pkt[2] = seq;
wmb(); /* flush PRD, pkt writes */
- writel(pp->pkt_dma, ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT);
- readl(ap->ioaddr.cmd_addr + PDC_PKT_SUBMIT); /* flush */
+ writel(pp->pkt_dma, ata_mmio + PDC_PKT_SUBMIT);
+ readl(ata_mmio + PDC_PKT_SUBMIT); /* flush */
}
static unsigned int pdc_qc_issue(struct ata_queued_cmd *qc)
@@ -909,11 +907,9 @@
case ATA_PROT_DMA:
pdc_packet_start(qc);
return 0;
-
default:
break;
}
-
return ata_sff_qc_issue(qc);
}
@@ -987,7 +983,7 @@
static void pdc_host_init(struct ata_host *host)
{
- void __iomem *mmio = host->iomap[PDC_MMIO_BAR];
+ void __iomem *host_mmio = host->iomap[PDC_MMIO_BAR];
int is_gen2 = host->ports[0]->flags & PDC_FLAG_GEN_II;
int hotplug_offset;
u32 tmp;
@@ -1004,38 +1000,38 @@
*/
/* enable BMR_BURST, maybe change FIFO_SHD to 8 dwords */
- tmp = readl(mmio + PDC_FLASH_CTL);
+ tmp = readl(host_mmio + PDC_FLASH_CTL);
tmp |= 0x02000; /* bit 13 (enable bmr burst) */
if (!is_gen2)
tmp |= 0x10000; /* bit 16 (fifo threshold at 8 dw) */
- writel(tmp, mmio + PDC_FLASH_CTL);
+ writel(tmp, host_mmio + PDC_FLASH_CTL);
/* clear plug/unplug flags for all ports */
- tmp = readl(mmio + hotplug_offset);
- writel(tmp | 0xff, mmio + hotplug_offset);
+ tmp = readl(host_mmio + hotplug_offset);
+ writel(tmp | 0xff, host_mmio + hotplug_offset);
/* unmask plug/unplug ints */
- tmp = readl(mmio + hotplug_offset);
- writel(tmp & ~0xff0000, mmio + hotplug_offset);
+ tmp = readl(host_mmio + hotplug_offset);
+ writel(tmp & ~0xff0000, host_mmio + hotplug_offset);
/* don't initialise TBG or SLEW on 2nd generation chips */
if (is_gen2)
return;
/* reduce TBG clock to 133 Mhz. */
- tmp = readl(mmio + PDC_TBG_MODE);
+ tmp = readl(host_mmio + PDC_TBG_MODE);
tmp &= ~0x30000; /* clear bit 17, 16*/
tmp |= 0x10000; /* set bit 17:16 = 0:1 */
- writel(tmp, mmio + PDC_TBG_MODE);
+ writel(tmp, host_mmio + PDC_TBG_MODE);
- readl(mmio + PDC_TBG_MODE); /* flush */
+ readl(host_mmio + PDC_TBG_MODE); /* flush */
msleep(10);
/* adjust slew rate control register. */
- tmp = readl(mmio + PDC_SLEW_CTL);
+ tmp = readl(host_mmio + PDC_SLEW_CTL);
tmp &= 0xFFFFF03F; /* clear bit 11 ~ 6 */
tmp |= 0x00000900; /* set bit 11-9 = 100b , bit 8-6 = 100 */
- writel(tmp, mmio + PDC_SLEW_CTL);
+ writel(tmp, host_mmio + PDC_SLEW_CTL);
}
static int pdc_ata_init_one(struct pci_dev *pdev,
@@ -1045,7 +1041,7 @@
const struct ata_port_info *pi = &pdc_port_info[ent->driver_data];
const struct ata_port_info *ppi[PDC_MAX_PORTS];
struct ata_host *host;
- void __iomem *base;
+ void __iomem *host_mmio;
int n_ports, i, rc;
int is_sataii_tx4;
@@ -1062,7 +1058,7 @@
pcim_pin_device(pdev);
if (rc)
return rc;
- base = pcim_iomap_table(pdev)[PDC_MMIO_BAR];
+ host_mmio = pcim_iomap_table(pdev)[PDC_MMIO_BAR];
/* determine port configuration and setup host */
n_ports = 2;
@@ -1072,7 +1068,7 @@
ppi[i] = pi;
if (pi->flags & PDC_FLAG_SATA_PATA) {
- u8 tmp = readb(base + PDC_FLASH_CTL+1);
+ u8 tmp = readb(host_mmio + PDC_FLASH_CTL + 1);
if (!(tmp & 0x80))
ppi[n_ports++] = pi + 1;
}
@@ -1088,13 +1084,13 @@
for (i = 0; i < host->n_ports; i++) {
struct ata_port *ap = host->ports[i];
unsigned int ata_no = pdc_port_no_to_ata_no(i, is_sataii_tx4);
- unsigned int port_offset = 0x200 + ata_no * 0x80;
+ unsigned int ata_offset = 0x200 + ata_no * 0x80;
unsigned int scr_offset = 0x400 + ata_no * 0x100;
- pdc_ata_setup_port(ap, base + port_offset, base + scr_offset);
+ pdc_ata_setup_port(ap, host_mmio + ata_offset, host_mmio + scr_offset);
ata_port_pbar_desc(ap, PDC_MMIO_BAR, -1, "mmio");
- ata_port_pbar_desc(ap, PDC_MMIO_BAR, port_offset, "port");
+ ata_port_pbar_desc(ap, PDC_MMIO_BAR, ata_offset, "ata");
}
/* initialize adapter */
diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c
index 27a1101..8ee6b5b 100644
--- a/drivers/ata/sata_sil24.c
+++ b/drivers/ata/sata_sil24.c
@@ -899,14 +899,25 @@
static void sil24_pmp_attach(struct ata_port *ap)
{
+ u32 *gscr = ap->link.device->gscr;
+
sil24_config_pmp(ap, 1);
sil24_init_port(ap);
+
+ if (sata_pmp_gscr_vendor(gscr) == 0x11ab &&
+ sata_pmp_gscr_devid(gscr) == 0x4140) {
+ ata_port_printk(ap, KERN_INFO,
+ "disabling NCQ support due to sil24-mv4140 quirk\n");
+ ap->flags &= ~ATA_FLAG_NCQ;
+ }
}
static void sil24_pmp_detach(struct ata_port *ap)
{
sil24_init_port(ap);
sil24_config_pmp(ap, 0);
+
+ ap->flags |= ATA_FLAG_NCQ;
}
static int sil24_pmp_hardreset(struct ata_link *link, unsigned int *class,
diff --git a/drivers/atm/eni.h b/drivers/atm/eni.h
index d04fefb..e4c9525 100644
--- a/drivers/atm/eni.h
+++ b/drivers/atm/eni.h
@@ -18,7 +18,6 @@
#include "midway.h"
-#define KERNEL_OFFSET 0xC0000000 /* kernel 0x0 is at phys 0xC0000000 */
#define DEV_LABEL "eni"
#define UBR_BUFFER (128*1024) /* UBR buffer size */
diff --git a/drivers/atm/fore200e.h b/drivers/atm/fore200e.h
index 183841c..8dd4aa7 100644
--- a/drivers/atm/fore200e.h
+++ b/drivers/atm/fore200e.h
@@ -1,4 +1,3 @@
-/* $Id: fore200e.h,v 1.4 2000/04/14 10:10:34 davem Exp $ */
#ifndef _FORE200E_H
#define _FORE200E_H
diff --git a/drivers/atm/fore200e_mkfirm.c b/drivers/atm/fore200e_mkfirm.c
index 2ebe1a1..520e14b 100644
--- a/drivers/atm/fore200e_mkfirm.c
+++ b/drivers/atm/fore200e_mkfirm.c
@@ -1,6 +1,4 @@
/*
- $Id: fore200e_mkfirm.c,v 1.1 2000/02/21 16:04:32 davem Exp $
-
mkfirm.c: generates a C readable file from a binary firmware image
Christophe Lizzi (lizzi@{csti.fr, cnam.fr}), June 1999.
diff --git a/drivers/atm/he.h b/drivers/atm/he.h
index 1dc2775..fe6cd15a 100644
--- a/drivers/atm/he.h
+++ b/drivers/atm/he.h
@@ -1,5 +1,3 @@
-/* $Id: he.h,v 1.4 2003/05/06 22:48:00 chas Exp $ */
-
/*
he.h
diff --git a/drivers/atm/idt77252.c b/drivers/atm/idt77252.c
index 28d77b5..3a504e9 100644
--- a/drivers/atm/idt77252.c
+++ b/drivers/atm/idt77252.c
@@ -1,8 +1,4 @@
/*******************************************************************
- * ident "$Id: idt77252.c,v 1.2 2001/11/11 08:13:54 ecd Exp $"
- *
- * $Author: ecd $
- * $Date: 2001/11/11 08:13:54 $
*
* Copyright (c) 2000 ATecoM GmbH
*
@@ -29,9 +25,6 @@
* 675 Mass Ave, Cambridge, MA 02139, USA.
*
*******************************************************************/
-static char const rcsid[] =
-"$Id: idt77252.c,v 1.2 2001/11/11 08:13:54 ecd Exp $";
-
#include <linux/module.h>
#include <linux/pci.h>
diff --git a/drivers/atm/idt77252.h b/drivers/atm/idt77252.h
index 6f2b4a5..e83eaf1 100644
--- a/drivers/atm/idt77252.h
+++ b/drivers/atm/idt77252.h
@@ -1,8 +1,4 @@
/*******************************************************************
- * ident "$Id: idt77252.h,v 1.2 2001/11/11 08:13:54 ecd Exp $"
- *
- * $Author: ecd $
- * $Date: 2001/11/11 08:13:54 $
*
* Copyright (c) 2000 ATecoM GmbH
*
diff --git a/drivers/atm/iphase.h b/drivers/atm/iphase.h
index 133eefc..b2cd20f 100644
--- a/drivers/atm/iphase.h
+++ b/drivers/atm/iphase.h
@@ -1025,7 +1025,8 @@
spinlock_t rx_lock, misc_lock;
struct atm_vcc **rx_open; /* list of all open VCs */
u16 num_rx_desc, rx_buf_sz, rxing;
- u32 rx_pkt_ram, rx_tmp_cnt, rx_tmp_jif;
+ u32 rx_pkt_ram, rx_tmp_cnt;
+ unsigned long rx_tmp_jif;
void __iomem *RX_DESC_BASE_ADDR;
u32 drop_rxpkt, drop_rxcell, rx_cell_cnt, rx_pkt_cnt;
struct atm_dev *next_board; /* other iphase devices */
diff --git a/drivers/atm/nicstarmac.copyright b/drivers/atm/nicstarmac.copyright
index 2e15b39..180531a 100644
--- a/drivers/atm/nicstarmac.copyright
+++ b/drivers/atm/nicstarmac.copyright
@@ -13,7 +13,7 @@
*
* Modified to work with the IDT7721 nicstar -- AAL5 (tested) only.
*
- * R. D. Rechenmacher <ron@fnal.gov>, Aug. 6, 1997 $Revision: 1.1 $ $Date: 1999/08/20 11:00:11 $
+ * R. D. Rechenmacher <ron@fnal.gov>, Aug. 6, 1997
*
* Linux driver for the IDT77201 NICStAR PCI ATM controller.
* PHY component is expected to be 155 Mbps S/UNI-Lite or IDT 77155;
diff --git a/drivers/base/class.c b/drivers/base/class.c
index 0ef00e8..e085af0 100644
--- a/drivers/base/class.c
+++ b/drivers/base/class.c
@@ -140,7 +140,6 @@
pr_debug("device class '%s': registering\n", cls->name);
- INIT_LIST_HEAD(&cls->children);
INIT_LIST_HEAD(&cls->devices);
INIT_LIST_HEAD(&cls->interfaces);
kset_init(&cls->class_dirs);
diff --git a/drivers/base/core.c b/drivers/base/core.c
index be288b5..ee0a51a 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -760,6 +760,22 @@
}
/**
+ * dev_set_name - set a device name
+ * @dev: device
+ * @fmt: format string for the device's name
+ */
+int dev_set_name(struct device *dev, const char *fmt, ...)
+{
+ va_list vargs;
+
+ va_start(vargs, fmt);
+ vsnprintf(dev->bus_id, sizeof(dev->bus_id), fmt, vargs);
+ va_end(vargs);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(dev_set_name);
+
+/**
* device_add - add device to device hierarchy.
* @dev: device.
*
@@ -1084,6 +1100,102 @@
}
/**
+ * device_create_vargs - creates a device and registers it with sysfs
+ * @class: pointer to the struct class that this device should be registered to
+ * @parent: pointer to the parent struct device of this new device, if any
+ * @devt: the dev_t for the char device to be added
+ * @drvdata: the data to be added to the device for callbacks
+ * @fmt: string for the device's name
+ * @args: va_list for the device's name
+ *
+ * This function can be used by char device classes. A struct device
+ * will be created in sysfs, registered to the specified class.
+ *
+ * A "dev" file will be created, showing the dev_t for the device, if
+ * the dev_t is not 0,0.
+ * If a pointer to a parent struct device is passed in, the newly created
+ * struct device will be a child of that device in sysfs.
+ * The pointer to the struct device will be returned from the call.
+ * Any further sysfs files that might be required can be created using this
+ * pointer.
+ *
+ * Note: the struct class passed to this function must have previously
+ * been created with a call to class_create().
+ */
+struct device *device_create_vargs(struct class *class, struct device *parent,
+ dev_t devt, void *drvdata, const char *fmt,
+ va_list args)
+{
+ struct device *dev = NULL;
+ int retval = -ENODEV;
+
+ if (class == NULL || IS_ERR(class))
+ goto error;
+
+ dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+ if (!dev) {
+ retval = -ENOMEM;
+ goto error;
+ }
+
+ dev->devt = devt;
+ dev->class = class;
+ dev->parent = parent;
+ dev->release = device_create_release;
+ dev_set_drvdata(dev, drvdata);
+
+ vsnprintf(dev->bus_id, BUS_ID_SIZE, fmt, args);
+ retval = device_register(dev);
+ if (retval)
+ goto error;
+
+ return dev;
+
+error:
+ kfree(dev);
+ return ERR_PTR(retval);
+}
+EXPORT_SYMBOL_GPL(device_create_vargs);
+
+/**
+ * device_create_drvdata - creates a device and registers it with sysfs
+ * @class: pointer to the struct class that this device should be registered to
+ * @parent: pointer to the parent struct device of this new device, if any
+ * @devt: the dev_t for the char device to be added
+ * @drvdata: the data to be added to the device for callbacks
+ * @fmt: string for the device's name
+ *
+ * This function can be used by char device classes. A struct device
+ * will be created in sysfs, registered to the specified class.
+ *
+ * A "dev" file will be created, showing the dev_t for the device, if
+ * the dev_t is not 0,0.
+ * If a pointer to a parent struct device is passed in, the newly created
+ * struct device will be a child of that device in sysfs.
+ * The pointer to the struct device will be returned from the call.
+ * Any further sysfs files that might be required can be created using this
+ * pointer.
+ *
+ * Note: the struct class passed to this function must have previously
+ * been created with a call to class_create().
+ */
+struct device *device_create_drvdata(struct class *class,
+ struct device *parent,
+ dev_t devt,
+ void *drvdata,
+ const char *fmt, ...)
+{
+ va_list vargs;
+ struct device *dev;
+
+ va_start(vargs, fmt);
+ dev = device_create_vargs(class, parent, devt, drvdata, fmt, vargs);
+ va_end(vargs);
+ return dev;
+}
+EXPORT_SYMBOL_GPL(device_create_drvdata);
+
+/**
* device_create - creates a device and registers it with sysfs
* @class: pointer to the struct class that this device should be registered to
* @parent: pointer to the parent struct device of this new device, if any
@@ -1107,36 +1219,13 @@
struct device *device_create(struct class *class, struct device *parent,
dev_t devt, const char *fmt, ...)
{
- va_list args;
- struct device *dev = NULL;
- int retval = -ENODEV;
+ va_list vargs;
+ struct device *dev;
- if (class == NULL || IS_ERR(class))
- goto error;
-
- dev = kzalloc(sizeof(*dev), GFP_KERNEL);
- if (!dev) {
- retval = -ENOMEM;
- goto error;
- }
-
- dev->devt = devt;
- dev->class = class;
- dev->parent = parent;
- dev->release = device_create_release;
-
- va_start(args, fmt);
- vsnprintf(dev->bus_id, BUS_ID_SIZE, fmt, args);
- va_end(args);
- retval = device_register(dev);
- if (retval)
- goto error;
-
+ va_start(vargs, fmt);
+ dev = device_create_vargs(class, parent, devt, NULL, fmt, vargs);
+ va_end(vargs);
return dev;
-
-error:
- kfree(dev);
- return ERR_PTR(retval);
}
EXPORT_SYMBOL_GPL(device_create);
@@ -1218,13 +1307,11 @@
}
#else
if (dev->class) {
- sysfs_remove_link(&dev->class->subsys.kobj, old_device_name);
error = sysfs_create_link(&dev->class->subsys.kobj, &dev->kobj,
dev->bus_id);
- if (error) {
- dev_err(dev, "%s: sysfs_create_symlink failed (%d)\n",
- __func__, error);
- }
+ if (error)
+ goto out;
+ sysfs_remove_link(&dev->class->subsys.kobj, old_device_name);
}
#endif
diff --git a/drivers/base/memory.c b/drivers/base/memory.c
index 8ce6de5..937e825 100644
--- a/drivers/base/memory.c
+++ b/drivers/base/memory.c
@@ -53,11 +53,13 @@
{
return blocking_notifier_chain_register(&memory_chain, nb);
}
+EXPORT_SYMBOL(register_memory_notifier);
void unregister_memory_notifier(struct notifier_block *nb)
{
blocking_notifier_chain_unregister(&memory_chain, nb);
}
+EXPORT_SYMBOL(unregister_memory_notifier);
/*
* register_memory - Setup a sysfs device for a memory block
diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c
index 7b76fd3..45cc3d9 100644
--- a/drivers/base/power/main.c
+++ b/drivers/base/power/main.c
@@ -418,7 +418,7 @@
{
if (ret) {
printk(KERN_ERR "%s(): ", function);
- print_fn_descriptor_symbol("%s() returns ", (unsigned long)fn);
+ print_fn_descriptor_symbol("%s returns ", fn);
printk("%d\n", ret);
}
}
diff --git a/drivers/block/amiflop.c b/drivers/block/amiflop.c
index c9751b2..7516baf 100644
--- a/drivers/block/amiflop.c
+++ b/drivers/block/amiflop.c
@@ -1714,10 +1714,10 @@
int i, ret;
if (!MACH_IS_AMIGA)
- return -ENXIO;
+ return -ENODEV;
if (!AMIGAHW_PRESENT(AMI_FLOPPY))
- return -ENXIO;
+ return -ENODEV;
if (register_blkdev(FLOPPY_MAJOR,"fd"))
return -EBUSY;
@@ -1755,7 +1755,7 @@
if (!floppy_queue)
goto out_queue;
- ret = -ENXIO;
+ ret = -ENODEV;
if (fd_probe_drives() < 1) /* No usable drives */
goto out_probe;
diff --git a/drivers/block/brd.c b/drivers/block/brd.c
index a196ef7..24b97b0 100644
--- a/drivers/block/brd.c
+++ b/drivers/block/brd.c
@@ -397,6 +397,7 @@
MODULE_PARM_DESC(max_part, "Maximum number of partitions per RAM disk");
MODULE_LICENSE("GPL");
MODULE_ALIAS_BLOCKDEV_MAJOR(RAMDISK_MAJOR);
+MODULE_ALIAS("rd");
#ifndef MODULE
/* Legacy boot options - nonmodular */
@@ -447,6 +448,7 @@
disk->fops = &brd_fops;
disk->private_data = brd;
disk->queue = brd->brd_queue;
+ disk->flags |= GENHD_FL_SUPPRESS_PARTITION_INFO;
sprintf(disk->disk_name, "ram%d", i);
set_capacity(disk, rd_size * 2);
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index e336b05..5f1e1cc 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -53,15 +53,16 @@
#include <linux/scatterlist.h>
#define CCISS_DRIVER_VERSION(maj,min,submin) ((maj<<16)|(min<<8)|(submin))
-#define DRIVER_NAME "HP CISS Driver (v 3.6.14)"
-#define DRIVER_VERSION CCISS_DRIVER_VERSION(3,6,14)
+#define DRIVER_NAME "HP CISS Driver (v 3.6.20)"
+#define DRIVER_VERSION CCISS_DRIVER_VERSION(3, 6, 20)
/* Embedded module documentation macros - see modules.h */
MODULE_AUTHOR("Hewlett-Packard Company");
-MODULE_DESCRIPTION("Driver for HP Controller SA5xxx SA6xxx version 3.6.14");
+MODULE_DESCRIPTION("Driver for HP Smart Array Controllers");
MODULE_SUPPORTED_DEVICE("HP SA5i SA5i+ SA532 SA5300 SA5312 SA641 SA642 SA6400"
- " SA6i P600 P800 P400 P400i E200 E200i E500");
-MODULE_VERSION("3.6.14");
+ " SA6i P600 P800 P400 P400i E200 E200i E500 P700m"
+ " Smart Array G2 Series SAS/SATA Controllers");
+MODULE_VERSION("3.6.20");
MODULE_LICENSE("GPL");
#include "cciss_cmd.h"
@@ -90,6 +91,11 @@
{PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSD, 0x103C, 0x3215},
{PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSC, 0x103C, 0x3237},
{PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSC, 0x103C, 0x323D},
+ {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3241},
+ {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3243},
+ {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3245},
+ {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3247},
+ {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3249},
{PCI_VENDOR_ID_HP, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
PCI_CLASS_STORAGE_RAID << 8, 0xffff << 8, 0},
{0,}
@@ -123,6 +129,11 @@
{0x3215103C, "Smart Array E200i", &SA5_access, 120},
{0x3237103C, "Smart Array E500", &SA5_access, 512},
{0x323D103C, "Smart Array P700m", &SA5_access, 512},
+ {0x3241103C, "Smart Array P212", &SA5_access, 384},
+ {0x3243103C, "Smart Array P410", &SA5_access, 384},
+ {0x3245103C, "Smart Array P410i", &SA5_access, 384},
+ {0x3247103C, "Smart Array P411", &SA5_access, 384},
+ {0x3249103C, "Smart Array P812", &SA5_access, 384},
{0xFFFF103C, "Unknown Smart Array", &SA5_access, 120},
};
diff --git a/drivers/block/viodasd.c b/drivers/block/viodasd.c
index ebfe038..f1c8feb 100644
--- a/drivers/block/viodasd.c
+++ b/drivers/block/viodasd.c
@@ -3,7 +3,7 @@
* Authors: Dave Boutcher <boutcher@us.ibm.com>
* Ryan Arnold <ryanarn@us.ibm.com>
* Colin Devilbiss <devilbis@us.ibm.com>
- * Stephen Rothwell <sfr@au1.ibm.com>
+ * Stephen Rothwell
*
* (C) Copyright 2000-2004 IBM Corporation
*
diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c
index 84e064f..dd7ea20 100644
--- a/drivers/block/virtio_blk.c
+++ b/drivers/block/virtio_blk.c
@@ -260,6 +260,10 @@
if (virtio_has_feature(vdev, VIRTIO_BLK_F_BARRIER))
blk_queue_ordered(vblk->disk->queue, QUEUE_ORDERED_TAG, NULL);
+ /* If disk is read-only in the host, the guest should obey */
+ if (virtio_has_feature(vdev, VIRTIO_BLK_F_RO))
+ set_disk_ro(vblk->disk, 1);
+
/* Host must always specify the capacity. */
vdev->config->get(vdev, offsetof(struct virtio_blk_config, capacity),
&cap, sizeof(cap));
@@ -311,6 +315,7 @@
/* Stop all the virtqueues. */
vdev->config->reset(vdev);
+ del_gendisk(vblk->disk);
blk_cleanup_queue(vblk->disk->queue);
put_disk(vblk->disk);
mempool_destroy(vblk->pool);
@@ -325,7 +330,7 @@
static unsigned int features[] = {
VIRTIO_BLK_F_BARRIER, VIRTIO_BLK_F_SEG_MAX, VIRTIO_BLK_F_SIZE_MAX,
- VIRTIO_BLK_F_GEOMETRY,
+ VIRTIO_BLK_F_GEOMETRY, VIRTIO_BLK_F_RO,
};
static struct virtio_driver virtio_blk = {
diff --git a/drivers/block/z2ram.c b/drivers/block/z2ram.c
index 2d5853c..be20a67 100644
--- a/drivers/block/z2ram.c
+++ b/drivers/block/z2ram.c
@@ -332,7 +332,7 @@
int ret;
if (!MACH_IS_AMIGA)
- return -ENXIO;
+ return -ENODEV;
ret = -EBUSY;
if (register_blkdev(Z2RAM_MAJOR, DEVICE_NAME))
diff --git a/drivers/cdrom/viocd.c b/drivers/cdrom/viocd.c
index 5245a4a..9d0dfe6 100644
--- a/drivers/cdrom/viocd.c
+++ b/drivers/cdrom/viocd.c
@@ -6,7 +6,7 @@
* Authors: Dave Boutcher <boutcher@us.ibm.com>
* Ryan Arnold <ryanarn@us.ibm.com>
* Colin Devilbiss <devilbis@us.ibm.com>
- * Stephen Rothwell <sfr@au1.ibm.com>
+ * Stephen Rothwell
*
* (C) Copyright 2000-2004 IBM Corporation
*
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 5dce387..2d854bb 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -118,8 +118,8 @@
order to become a dial-in server. If you have a card like that, say
Y here and read <file:Documentation/computone.txt>.
- To compile this driver as modules, choose M here: the
- modules will be called ip2 and ip2main.
+ To compile this driver as module, choose M here: the
+ module will be called ip2.
config ROCKETPORT
tristate "Comtrol RocketPort support"
@@ -196,6 +196,7 @@
config MOXA_INTELLIO
tristate "Moxa Intellio support"
depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI)
+ select FW_LOADER
help
Say Y here if you have a Moxa Intellio multiport serial card.
@@ -748,7 +749,7 @@
if RTC_LIB=n
config RTC
- tristate "Enhanced Real Time Clock Support"
+ tristate "Enhanced Real Time Clock Support (legacy PC RTC driver)"
depends on !PPC && !PARISC && !IA64 && !M68K && !SPARC && !FRV \
&& !ARM && !SUPERH && !S390 && !AVR32
---help---
@@ -1035,9 +1036,9 @@
non-periodic and/or periodic.
config HPET_RTC_IRQ
- bool "HPET Control RTC IRQ" if !HPET_EMULATE_RTC
- default n
- depends on HPET
+ bool
+ default HPET_EMULATE_RTC
+ depends on RTC && HPET
help
If you say Y here, you will disable RTC_IRQ in drivers/char/rtc.c. It
is assumed the platform called hpet_alloc with the RTC IRQ values for
diff --git a/drivers/char/agp/ati-agp.c b/drivers/char/agp/ati-agp.c
index 55c97f6..07b4d8f 100644
--- a/drivers/char/agp/ati-agp.c
+++ b/drivers/char/agp/ati-agp.c
@@ -458,6 +458,10 @@
.chipset_name = "IGP9100/M",
},
{
+ .device_id = PCI_DEVICE_ID_ATI_RS350_133,
+ .chipset_name = "IGP9000/M",
+ },
+ {
.device_id = PCI_DEVICE_ID_ATI_RS350_200,
.chipset_name = "IGP9100/M",
},
diff --git a/drivers/char/drm/drm.h b/drivers/char/drm/drm.h
index 6874f31..3a05c6d 100644
--- a/drivers/char/drm/drm.h
+++ b/drivers/char/drm/drm.h
@@ -471,7 +471,6 @@
enum drm_vblank_seq_type {
_DRM_VBLANK_ABSOLUTE = 0x0, /**< Wait for specific vblank sequence number */
_DRM_VBLANK_RELATIVE = 0x1, /**< Wait for given number of vblanks */
- _DRM_VBLANK_FLIP = 0x8000000, /**< Scheduled buffer swap should flip */
_DRM_VBLANK_NEXTONMISS = 0x10000000, /**< If missed, wait for next vblank */
_DRM_VBLANK_SECONDARY = 0x20000000, /**< Secondary display controller */
_DRM_VBLANK_SIGNAL = 0x40000000 /**< Send signal instead of blocking */
@@ -504,21 +503,6 @@
struct drm_wait_vblank_reply reply;
};
-enum drm_modeset_ctl_cmd {
- _DRM_PRE_MODESET = 1,
- _DRM_POST_MODESET = 2,
-};
-
-/**
- * DRM_IOCTL_MODESET_CTL ioctl argument type
- *
- * \sa drmModesetCtl().
- */
-struct drm_modeset_ctl {
- unsigned long arg;
- enum drm_modeset_ctl_cmd cmd;
-};
-
/**
* DRM_IOCTL_AGP_ENABLE ioctl argument type.
*
@@ -603,7 +587,6 @@
#define DRM_IOCTL_GET_CLIENT DRM_IOWR(0x05, struct drm_client)
#define DRM_IOCTL_GET_STATS DRM_IOR( 0x06, struct drm_stats)
#define DRM_IOCTL_SET_VERSION DRM_IOWR(0x07, struct drm_set_version)
-#define DRM_IOCTL_MODESET_CTL DRM_IOW(0x08, struct drm_modeset_ctl)
#define DRM_IOCTL_SET_UNIQUE DRM_IOW( 0x10, struct drm_unique)
#define DRM_IOCTL_AUTH_MAGIC DRM_IOW( 0x11, struct drm_auth)
diff --git a/drivers/char/drm/drmP.h b/drivers/char/drm/drmP.h
index 213b3ca..0764b66 100644
--- a/drivers/char/drm/drmP.h
+++ b/drivers/char/drm/drmP.h
@@ -100,8 +100,10 @@
#define DRIVER_HAVE_DMA 0x20
#define DRIVER_HAVE_IRQ 0x40
#define DRIVER_IRQ_SHARED 0x80
+#define DRIVER_IRQ_VBL 0x100
#define DRIVER_DMA_QUEUE 0x200
#define DRIVER_FB_DMA 0x400
+#define DRIVER_IRQ_VBL2 0x800
/***********************************************************************/
/** \name Begin the DRM... */
@@ -577,52 +579,10 @@
int (*context_dtor) (struct drm_device *dev, int context);
int (*kernel_context_switch) (struct drm_device *dev, int old,
int new);
- void (*kernel_context_switch_unlock) (struct drm_device * dev);
- /**
- * get_vblank_counter - get raw hardware vblank counter
- * @dev: DRM device
- * @crtc: counter to fetch
- *
- * Driver callback for fetching a raw hardware vblank counter
- * for @crtc. If a device doesn't have a hardware counter, the
- * driver can simply return the value of drm_vblank_count and
- * make the enable_vblank() and disable_vblank() hooks into no-ops,
- * leaving interrupts enabled at all times.
- *
- * Wraparound handling and loss of events due to modesetting is dealt
- * with in the DRM core code.
- *
- * RETURNS
- * Raw vblank counter value.
- */
- u32 (*get_vblank_counter) (struct drm_device *dev, int crtc);
-
- /**
- * enable_vblank - enable vblank interrupt events
- * @dev: DRM device
- * @crtc: which irq to enable
- *
- * Enable vblank interrupts for @crtc. If the device doesn't have
- * a hardware vblank counter, this routine should be a no-op, since
- * interrupts will have to stay on to keep the count accurate.
- *
- * RETURNS
- * Zero on success, appropriate errno if the given @crtc's vblank
- * interrupt cannot be enabled.
- */
- int (*enable_vblank) (struct drm_device *dev, int crtc);
-
- /**
- * disable_vblank - disable vblank interrupt events
- * @dev: DRM device
- * @crtc: which irq to enable
- *
- * Disable vblank interrupts for @crtc. If the device doesn't have
- * a hardware vblank counter, this routine should be a no-op, since
- * interrupts will have to stay on to keep the count accurate.
- */
- void (*disable_vblank) (struct drm_device *dev, int crtc);
- int (*dri_library_name) (struct drm_device *dev, char * buf);
+ void (*kernel_context_switch_unlock) (struct drm_device *dev);
+ int (*vblank_wait) (struct drm_device *dev, unsigned int *sequence);
+ int (*vblank_wait2) (struct drm_device *dev, unsigned int *sequence);
+ int (*dri_library_name) (struct drm_device *dev, char *buf);
/**
* Called by \c drm_device_is_agp. Typically used to determine if a
@@ -641,7 +601,7 @@
irqreturn_t(*irq_handler) (DRM_IRQ_ARGS);
void (*irq_preinstall) (struct drm_device *dev);
- int (*irq_postinstall) (struct drm_device *dev);
+ void (*irq_postinstall) (struct drm_device *dev);
void (*irq_uninstall) (struct drm_device *dev);
void (*reclaim_buffers) (struct drm_device *dev,
struct drm_file * file_priv);
@@ -770,21 +730,13 @@
/** \name VBLANK IRQ support */
/*@{ */
- wait_queue_head_t *vbl_queue; /**< VBLANK wait queue */
- atomic_t *_vblank_count; /**< number of VBLANK interrupts (driver must alloc the right number of counters) */
+ wait_queue_head_t vbl_queue; /**< VBLANK wait queue */
+ atomic_t vbl_received;
+ atomic_t vbl_received2; /**< number of secondary VBLANK interrupts */
spinlock_t vbl_lock;
- struct list_head *vbl_sigs; /**< signal list to send on VBLANK */
- atomic_t vbl_signal_pending; /* number of signals pending on all crtcs*/
- atomic_t *vblank_refcount; /* number of users of vblank interrupts per crtc */
- u32 *last_vblank; /* protected by dev->vbl_lock, used */
- /* for wraparound handling */
- u32 *vblank_offset; /* used to track how many vblanks */
- int *vblank_enabled; /* so we don't call enable more than
- once per disable */
- u32 *vblank_premodeset; /* were lost during modeset */
- struct timer_list vblank_disable_timer;
-
- unsigned long max_vblank_count; /**< size of vblank counter register */
+ struct list_head vbl_sigs; /**< signal list to send on VBLANK */
+ struct list_head vbl_sigs2; /**< signals to send on secondary VBLANK */
+ unsigned int vbl_pending;
spinlock_t tasklet_lock; /**< For drm_locked_tasklet */
void (*locked_tasklet_func)(struct drm_device *dev);
@@ -804,7 +756,6 @@
#ifdef __alpha__
struct pci_controller *hose;
#endif
- int num_crtcs; /**< Number of CRTCs on this device */
struct drm_sg_mem *sg; /**< Scatter gather memory */
void *dev_private; /**< device private data */
struct drm_sigdata sigdata; /**< For block_all_signals */
@@ -1039,19 +990,11 @@
extern void drm_driver_irq_postinstall(struct drm_device *dev);
extern void drm_driver_irq_uninstall(struct drm_device *dev);
-extern int drm_vblank_init(struct drm_device *dev, int num_crtcs);
-extern int drm_wait_vblank(struct drm_device *dev, void *data, struct drm_file *filp);
-extern int drm_vblank_wait(struct drm_device * dev, unsigned int *vbl_seq);
-extern void drm_locked_tasklet(struct drm_device *dev, void(*func)(struct drm_device*));
-extern u32 drm_vblank_count(struct drm_device *dev, int crtc);
-extern void drm_update_vblank_count(struct drm_device *dev, int crtc);
-extern void drm_handle_vblank(struct drm_device *dev, int crtc);
-extern int drm_vblank_get(struct drm_device *dev, int crtc);
-extern void drm_vblank_put(struct drm_device *dev, int crtc);
-
- /* Modesetting support */
-extern int drm_modeset_ctl(struct drm_device *dev, void *data,
+extern int drm_wait_vblank(struct drm_device *dev, void *data,
struct drm_file *file_priv);
+extern int drm_vblank_wait(struct drm_device *dev, unsigned int *vbl_seq);
+extern void drm_vbl_send_signals(struct drm_device *dev);
+extern void drm_locked_tasklet(struct drm_device *dev, void(*func)(struct drm_device*));
/* AGP/GART support (drm_agpsupport.h) */
extern struct drm_agp_head *drm_agp_init(struct drm_device *dev);
diff --git a/drivers/char/drm/drm_fops.c b/drivers/char/drm/drm_fops.c
index 68f0da8..d2e6da8 100644
--- a/drivers/char/drm/drm_fops.c
+++ b/drivers/char/drm/drm_fops.c
@@ -323,7 +323,6 @@
struct drm_file *file_priv = filp->private_data;
struct drm_device *dev = file_priv->minor->dev;
int retcode = 0;
- unsigned long irqflags;
lock_kernel();
@@ -355,11 +354,9 @@
*/
do{
- spin_lock_irqsave(&dev->lock.spinlock,
- irqflags);
+ spin_lock_bh(&dev->lock.spinlock);
locked = dev->lock.idle_has_lock;
- spin_unlock_irqrestore(&dev->lock.spinlock,
- irqflags);
+ spin_unlock_bh(&dev->lock.spinlock);
if (locked)
break;
schedule();
diff --git a/drivers/char/drm/drm_irq.c b/drivers/char/drm/drm_irq.c
index 286f9d6..089c015 100644
--- a/drivers/char/drm/drm_irq.c
+++ b/drivers/char/drm/drm_irq.c
@@ -71,117 +71,6 @@
return 0;
}
-static void vblank_disable_fn(unsigned long arg)
-{
- struct drm_device *dev = (struct drm_device *)arg;
- unsigned long irqflags;
- int i;
-
- for (i = 0; i < dev->num_crtcs; i++) {
- spin_lock_irqsave(&dev->vbl_lock, irqflags);
- if (atomic_read(&dev->vblank_refcount[i]) == 0 &&
- dev->vblank_enabled[i]) {
- dev->driver->disable_vblank(dev, i);
- dev->vblank_enabled[i] = 0;
- }
- spin_unlock_irqrestore(&dev->vbl_lock, irqflags);
- }
-}
-
-static void drm_vblank_cleanup(struct drm_device *dev)
-{
- /* Bail if the driver didn't call drm_vblank_init() */
- if (dev->num_crtcs == 0)
- return;
-
- del_timer(&dev->vblank_disable_timer);
-
- vblank_disable_fn((unsigned long)dev);
-
- drm_free(dev->vbl_queue, sizeof(*dev->vbl_queue) * dev->num_crtcs,
- DRM_MEM_DRIVER);
- drm_free(dev->vbl_sigs, sizeof(*dev->vbl_sigs) * dev->num_crtcs,
- DRM_MEM_DRIVER);
- drm_free(dev->_vblank_count, sizeof(*dev->_vblank_count) *
- dev->num_crtcs, DRM_MEM_DRIVER);
- drm_free(dev->vblank_refcount, sizeof(*dev->vblank_refcount) *
- dev->num_crtcs, DRM_MEM_DRIVER);
- drm_free(dev->vblank_enabled, sizeof(*dev->vblank_enabled) *
- dev->num_crtcs, DRM_MEM_DRIVER);
- drm_free(dev->last_vblank, sizeof(*dev->last_vblank) * dev->num_crtcs,
- DRM_MEM_DRIVER);
- drm_free(dev->vblank_premodeset, sizeof(*dev->vblank_premodeset) *
- dev->num_crtcs, DRM_MEM_DRIVER);
- drm_free(dev->vblank_offset, sizeof(*dev->vblank_offset) * dev->num_crtcs,
- DRM_MEM_DRIVER);
-
- dev->num_crtcs = 0;
-}
-
-int drm_vblank_init(struct drm_device *dev, int num_crtcs)
-{
- int i, ret = -ENOMEM;
-
- setup_timer(&dev->vblank_disable_timer, vblank_disable_fn,
- (unsigned long)dev);
- spin_lock_init(&dev->vbl_lock);
- atomic_set(&dev->vbl_signal_pending, 0);
- dev->num_crtcs = num_crtcs;
-
- dev->vbl_queue = drm_alloc(sizeof(wait_queue_head_t) * num_crtcs,
- DRM_MEM_DRIVER);
- if (!dev->vbl_queue)
- goto err;
-
- dev->vbl_sigs = drm_alloc(sizeof(struct list_head) * num_crtcs,
- DRM_MEM_DRIVER);
- if (!dev->vbl_sigs)
- goto err;
-
- dev->_vblank_count = drm_alloc(sizeof(atomic_t) * num_crtcs,
- DRM_MEM_DRIVER);
- if (!dev->_vblank_count)
- goto err;
-
- dev->vblank_refcount = drm_alloc(sizeof(atomic_t) * num_crtcs,
- DRM_MEM_DRIVER);
- if (!dev->vblank_refcount)
- goto err;
-
- dev->vblank_enabled = drm_calloc(num_crtcs, sizeof(int),
- DRM_MEM_DRIVER);
- if (!dev->vblank_enabled)
- goto err;
-
- dev->last_vblank = drm_calloc(num_crtcs, sizeof(u32), DRM_MEM_DRIVER);
- if (!dev->last_vblank)
- goto err;
-
- dev->vblank_premodeset = drm_calloc(num_crtcs, sizeof(u32),
- DRM_MEM_DRIVER);
- if (!dev->vblank_premodeset)
- goto err;
-
- dev->vblank_offset = drm_calloc(num_crtcs, sizeof(u32), DRM_MEM_DRIVER);
- if (!dev->vblank_offset)
- goto err;
-
- /* Zero per-crtc vblank stuff */
- for (i = 0; i < num_crtcs; i++) {
- init_waitqueue_head(&dev->vbl_queue[i]);
- INIT_LIST_HEAD(&dev->vbl_sigs[i]);
- atomic_set(&dev->_vblank_count[i], 0);
- atomic_set(&dev->vblank_refcount[i], 0);
- }
-
- return 0;
-
-err:
- drm_vblank_cleanup(dev);
- return ret;
-}
-EXPORT_SYMBOL(drm_vblank_init);
-
/**
* Install IRQ handler.
*
@@ -220,6 +109,17 @@
DRM_DEBUG("irq=%d\n", dev->irq);
+ if (drm_core_check_feature(dev, DRIVER_IRQ_VBL)) {
+ init_waitqueue_head(&dev->vbl_queue);
+
+ spin_lock_init(&dev->vbl_lock);
+
+ INIT_LIST_HEAD(&dev->vbl_sigs);
+ INIT_LIST_HEAD(&dev->vbl_sigs2);
+
+ dev->vbl_pending = 0;
+ }
+
/* Before installing handler */
dev->driver->irq_preinstall(dev);
@@ -237,14 +137,9 @@
}
/* After installing handler */
- ret = dev->driver->irq_postinstall(dev);
- if (ret < 0) {
- mutex_lock(&dev->struct_mutex);
- dev->irq_enabled = 0;
- mutex_unlock(&dev->struct_mutex);
- }
+ dev->driver->irq_postinstall(dev);
- return ret;
+ return 0;
}
/**
@@ -275,8 +170,6 @@
free_irq(dev->irq, dev);
- drm_vblank_cleanup(dev);
-
dev->locked_tasklet_func = NULL;
return 0;
@@ -321,148 +214,6 @@
}
/**
- * drm_vblank_count - retrieve "cooked" vblank counter value
- * @dev: DRM device
- * @crtc: which counter to retrieve
- *
- * Fetches the "cooked" vblank count value that represents the number of
- * vblank events since the system was booted, including lost events due to
- * modesetting activity.
- */
-u32 drm_vblank_count(struct drm_device *dev, int crtc)
-{
- return atomic_read(&dev->_vblank_count[crtc]) +
- dev->vblank_offset[crtc];
-}
-EXPORT_SYMBOL(drm_vblank_count);
-
-/**
- * drm_update_vblank_count - update the master vblank counter
- * @dev: DRM device
- * @crtc: counter to update
- *
- * Call back into the driver to update the appropriate vblank counter
- * (specified by @crtc). Deal with wraparound, if it occurred, and
- * update the last read value so we can deal with wraparound on the next
- * call if necessary.
- */
-void drm_update_vblank_count(struct drm_device *dev, int crtc)
-{
- unsigned long irqflags;
- u32 cur_vblank, diff;
-
- /*
- * Interrupts were disabled prior to this call, so deal with counter
- * wrap if needed.
- * NOTE! It's possible we lost a full dev->max_vblank_count events
- * here if the register is small or we had vblank interrupts off for
- * a long time.
- */
- cur_vblank = dev->driver->get_vblank_counter(dev, crtc);
- spin_lock_irqsave(&dev->vbl_lock, irqflags);
- if (cur_vblank < dev->last_vblank[crtc]) {
- diff = dev->max_vblank_count -
- dev->last_vblank[crtc];
- diff += cur_vblank;
- } else {
- diff = cur_vblank - dev->last_vblank[crtc];
- }
- dev->last_vblank[crtc] = cur_vblank;
- spin_unlock_irqrestore(&dev->vbl_lock, irqflags);
-
- atomic_add(diff, &dev->_vblank_count[crtc]);
-}
-EXPORT_SYMBOL(drm_update_vblank_count);
-
-/**
- * drm_vblank_get - get a reference count on vblank events
- * @dev: DRM device
- * @crtc: which CRTC to own
- *
- * Acquire a reference count on vblank events to avoid having them disabled
- * while in use. Note callers will probably want to update the master counter
- * using drm_update_vblank_count() above before calling this routine so that
- * wakeups occur on the right vblank event.
- *
- * RETURNS
- * Zero on success, nonzero on failure.
- */
-int drm_vblank_get(struct drm_device *dev, int crtc)
-{
- unsigned long irqflags;
- int ret = 0;
-
- spin_lock_irqsave(&dev->vbl_lock, irqflags);
- /* Going from 0->1 means we have to enable interrupts again */
- if (atomic_add_return(1, &dev->vblank_refcount[crtc]) == 1 &&
- !dev->vblank_enabled[crtc]) {
- ret = dev->driver->enable_vblank(dev, crtc);
- if (ret)
- atomic_dec(&dev->vblank_refcount[crtc]);
- else
- dev->vblank_enabled[crtc] = 1;
- }
- spin_unlock_irqrestore(&dev->vbl_lock, irqflags);
-
- return ret;
-}
-EXPORT_SYMBOL(drm_vblank_get);
-
-/**
- * drm_vblank_put - give up ownership of vblank events
- * @dev: DRM device
- * @crtc: which counter to give up
- *
- * Release ownership of a given vblank counter, turning off interrupts
- * if possible.
- */
-void drm_vblank_put(struct drm_device *dev, int crtc)
-{
- /* Last user schedules interrupt disable */
- if (atomic_dec_and_test(&dev->vblank_refcount[crtc]))
- mod_timer(&dev->vblank_disable_timer, jiffies + 5*DRM_HZ);
-}
-EXPORT_SYMBOL(drm_vblank_put);
-
-/**
- * drm_modeset_ctl - handle vblank event counter changes across mode switch
- * @DRM_IOCTL_ARGS: standard ioctl arguments
- *
- * Applications should call the %_DRM_PRE_MODESET and %_DRM_POST_MODESET
- * ioctls around modesetting so that any lost vblank events are accounted for.
- */
-int drm_modeset_ctl(struct drm_device *dev, void *data,
- struct drm_file *file_priv)
-{
- struct drm_modeset_ctl *modeset = data;
- int crtc, ret = 0;
- u32 new;
-
- crtc = modeset->arg;
- if (crtc >= dev->num_crtcs) {
- ret = -EINVAL;
- goto out;
- }
-
- switch (modeset->cmd) {
- case _DRM_PRE_MODESET:
- dev->vblank_premodeset[crtc] =
- dev->driver->get_vblank_counter(dev, crtc);
- break;
- case _DRM_POST_MODESET:
- new = dev->driver->get_vblank_counter(dev, crtc);
- dev->vblank_offset[crtc] = dev->vblank_premodeset[crtc] - new;
- break;
- default:
- ret = -EINVAL;
- break;
- }
-
-out:
- return ret;
-}
-
-/**
* Wait for VBLANK.
*
* \param inode device inode.
@@ -481,13 +232,12 @@
*
* If a signal is not requested, then calls vblank_wait().
*/
-int drm_wait_vblank(struct drm_device *dev, void *data,
- struct drm_file *file_priv)
+int drm_wait_vblank(struct drm_device *dev, void *data, struct drm_file *file_priv)
{
union drm_wait_vblank *vblwait = data;
struct timeval now;
int ret = 0;
- unsigned int flags, seq, crtc;
+ unsigned int flags, seq;
if ((!dev->irq) || (!dev->irq_enabled))
return -EINVAL;
@@ -501,13 +251,13 @@
}
flags = vblwait->request.type & _DRM_VBLANK_FLAGS_MASK;
- crtc = flags & _DRM_VBLANK_SECONDARY ? 1 : 0;
- if (crtc >= dev->num_crtcs)
+ if (!drm_core_check_feature(dev, (flags & _DRM_VBLANK_SECONDARY) ?
+ DRIVER_IRQ_VBL2 : DRIVER_IRQ_VBL))
return -EINVAL;
- drm_update_vblank_count(dev, crtc);
- seq = drm_vblank_count(dev, crtc);
+ seq = atomic_read((flags & _DRM_VBLANK_SECONDARY) ? &dev->vbl_received2
+ : &dev->vbl_received);
switch (vblwait->request.type & _DRM_VBLANK_TYPES_MASK) {
case _DRM_VBLANK_RELATIVE:
@@ -526,7 +276,8 @@
if (flags & _DRM_VBLANK_SIGNAL) {
unsigned long irqflags;
- struct list_head *vbl_sigs = &dev->vbl_sigs[crtc];
+ struct list_head *vbl_sigs = (flags & _DRM_VBLANK_SECONDARY)
+ ? &dev->vbl_sigs2 : &dev->vbl_sigs;
struct drm_vbl_sig *vbl_sig;
spin_lock_irqsave(&dev->vbl_lock, irqflags);
@@ -547,26 +298,22 @@
}
}
- if (atomic_read(&dev->vbl_signal_pending) >= 100) {
+ if (dev->vbl_pending >= 100) {
spin_unlock_irqrestore(&dev->vbl_lock, irqflags);
return -EBUSY;
}
+ dev->vbl_pending++;
+
spin_unlock_irqrestore(&dev->vbl_lock, irqflags);
- vbl_sig = drm_calloc(1, sizeof(struct drm_vbl_sig),
- DRM_MEM_DRIVER);
- if (!vbl_sig)
+ if (!
+ (vbl_sig =
+ drm_alloc(sizeof(struct drm_vbl_sig), DRM_MEM_DRIVER))) {
return -ENOMEM;
-
- ret = drm_vblank_get(dev, crtc);
- if (ret) {
- drm_free(vbl_sig, sizeof(struct drm_vbl_sig),
- DRM_MEM_DRIVER);
- return ret;
}
- atomic_inc(&dev->vbl_signal_pending);
+ memset((void *)vbl_sig, 0, sizeof(*vbl_sig));
vbl_sig->sequence = vblwait->request.sequence;
vbl_sig->info.si_signo = vblwait->request.signal;
@@ -580,20 +327,17 @@
vblwait->reply.sequence = seq;
} else {
- unsigned long cur_vblank;
+ if (flags & _DRM_VBLANK_SECONDARY) {
+ if (dev->driver->vblank_wait2)
+ ret = dev->driver->vblank_wait2(dev, &vblwait->request.sequence);
+ } else if (dev->driver->vblank_wait)
+ ret =
+ dev->driver->vblank_wait(dev,
+ &vblwait->request.sequence);
- ret = drm_vblank_get(dev, crtc);
- if (ret)
- return ret;
- DRM_WAIT_ON(ret, dev->vbl_queue[crtc], 3 * DRM_HZ,
- (((cur_vblank = drm_vblank_count(dev, crtc))
- - vblwait->request.sequence) <= (1 << 23)));
- drm_vblank_put(dev, crtc);
do_gettimeofday(&now);
-
vblwait->reply.tval_sec = now.tv_sec;
vblwait->reply.tval_usec = now.tv_usec;
- vblwait->reply.sequence = cur_vblank;
}
done:
@@ -604,57 +348,44 @@
* Send the VBLANK signals.
*
* \param dev DRM device.
- * \param crtc CRTC where the vblank event occurred
*
* Sends a signal for each task in drm_device::vbl_sigs and empties the list.
*
* If a signal is not requested, then calls vblank_wait().
*/
-static void drm_vbl_send_signals(struct drm_device * dev, int crtc)
+void drm_vbl_send_signals(struct drm_device * dev)
{
- struct drm_vbl_sig *vbl_sig, *tmp;
- struct list_head *vbl_sigs;
- unsigned int vbl_seq;
unsigned long flags;
+ int i;
spin_lock_irqsave(&dev->vbl_lock, flags);
- vbl_sigs = &dev->vbl_sigs[crtc];
- vbl_seq = drm_vblank_count(dev, crtc);
+ for (i = 0; i < 2; i++) {
+ struct drm_vbl_sig *vbl_sig, *tmp;
+ struct list_head *vbl_sigs = i ? &dev->vbl_sigs2 : &dev->vbl_sigs;
+ unsigned int vbl_seq = atomic_read(i ? &dev->vbl_received2 :
+ &dev->vbl_received);
- list_for_each_entry_safe(vbl_sig, tmp, vbl_sigs, head) {
- if ((vbl_seq - vbl_sig->sequence) <= (1 << 23)) {
- vbl_sig->info.si_code = vbl_seq;
- send_sig_info(vbl_sig->info.si_signo,
- &vbl_sig->info, vbl_sig->task);
+ list_for_each_entry_safe(vbl_sig, tmp, vbl_sigs, head) {
+ if ((vbl_seq - vbl_sig->sequence) <= (1 << 23)) {
+ vbl_sig->info.si_code = vbl_seq;
+ send_sig_info(vbl_sig->info.si_signo,
+ &vbl_sig->info, vbl_sig->task);
- list_del(&vbl_sig->head);
+ list_del(&vbl_sig->head);
- drm_free(vbl_sig, sizeof(*vbl_sig),
- DRM_MEM_DRIVER);
- atomic_dec(&dev->vbl_signal_pending);
- drm_vblank_put(dev, crtc);
- }
+ drm_free(vbl_sig, sizeof(*vbl_sig),
+ DRM_MEM_DRIVER);
+
+ dev->vbl_pending--;
+ }
+ }
}
spin_unlock_irqrestore(&dev->vbl_lock, flags);
}
-/**
- * drm_handle_vblank - handle a vblank event
- * @dev: DRM device
- * @crtc: where this event occurred
- *
- * Drivers should call this routine in their vblank interrupt handlers to
- * update the vblank counter and send any signals that may be pending.
- */
-void drm_handle_vblank(struct drm_device *dev, int crtc)
-{
- drm_update_vblank_count(dev, crtc);
- DRM_WAKEUP(&dev->vbl_queue[crtc]);
- drm_vbl_send_signals(dev, crtc);
-}
-EXPORT_SYMBOL(drm_handle_vblank);
+EXPORT_SYMBOL(drm_vbl_send_signals);
/**
* Tasklet wrapper function.
diff --git a/drivers/char/drm/drm_lock.c b/drivers/char/drm/drm_lock.c
index 12dcdd1..0998723 100644
--- a/drivers/char/drm/drm_lock.c
+++ b/drivers/char/drm/drm_lock.c
@@ -53,7 +53,6 @@
DECLARE_WAITQUEUE(entry, current);
struct drm_lock *lock = data;
int ret = 0;
- unsigned long irqflags;
++file_priv->lock_count;
@@ -72,9 +71,9 @@
return -EINVAL;
add_wait_queue(&dev->lock.lock_queue, &entry);
- spin_lock_irqsave(&dev->lock.spinlock, irqflags);
+ spin_lock_bh(&dev->lock.spinlock);
dev->lock.user_waiters++;
- spin_unlock_irqrestore(&dev->lock.spinlock, irqflags);
+ spin_unlock_bh(&dev->lock.spinlock);
for (;;) {
__set_current_state(TASK_INTERRUPTIBLE);
if (!dev->lock.hw_lock) {
@@ -96,9 +95,9 @@
break;
}
}
- spin_lock_irqsave(&dev->lock.spinlock, irqflags);
+ spin_lock_bh(&dev->lock.spinlock);
dev->lock.user_waiters--;
- spin_unlock_irqrestore(&dev->lock.spinlock, irqflags);
+ spin_unlock_bh(&dev->lock.spinlock);
__set_current_state(TASK_RUNNING);
remove_wait_queue(&dev->lock.lock_queue, &entry);
@@ -199,9 +198,8 @@
{
unsigned int old, new, prev;
volatile unsigned int *lock = &lock_data->hw_lock->lock;
- unsigned long irqflags;
- spin_lock_irqsave(&lock_data->spinlock, irqflags);
+ spin_lock_bh(&lock_data->spinlock);
do {
old = *lock;
if (old & _DRM_LOCK_HELD)
@@ -213,7 +211,7 @@
}
prev = cmpxchg(lock, old, new);
} while (prev != old);
- spin_unlock_irqrestore(&lock_data->spinlock, irqflags);
+ spin_unlock_bh(&lock_data->spinlock);
if (_DRM_LOCKING_CONTEXT(old) == context) {
if (old & _DRM_LOCK_HELD) {
@@ -274,16 +272,15 @@
{
unsigned int old, new, prev;
volatile unsigned int *lock = &lock_data->hw_lock->lock;
- unsigned long irqflags;
- spin_lock_irqsave(&lock_data->spinlock, irqflags);
+ spin_lock_bh(&lock_data->spinlock);
if (lock_data->kernel_waiters != 0) {
drm_lock_transfer(lock_data, 0);
lock_data->idle_has_lock = 1;
- spin_unlock_irqrestore(&lock_data->spinlock, irqflags);
+ spin_unlock_bh(&lock_data->spinlock);
return 1;
}
- spin_unlock_irqrestore(&lock_data->spinlock, irqflags);
+ spin_unlock_bh(&lock_data->spinlock);
do {
old = *lock;
@@ -347,20 +344,19 @@
void drm_idlelock_take(struct drm_lock_data *lock_data)
{
int ret = 0;
- unsigned long irqflags;
- spin_lock_irqsave(&lock_data->spinlock, irqflags);
+ spin_lock_bh(&lock_data->spinlock);
lock_data->kernel_waiters++;
if (!lock_data->idle_has_lock) {
- spin_unlock_irqrestore(&lock_data->spinlock, irqflags);
+ spin_unlock_bh(&lock_data->spinlock);
ret = drm_lock_take(lock_data, DRM_KERNEL_CONTEXT);
- spin_lock_irqsave(&lock_data->spinlock, irqflags);
+ spin_lock_bh(&lock_data->spinlock);
if (ret == 1)
lock_data->idle_has_lock = 1;
}
- spin_unlock_irqrestore(&lock_data->spinlock, irqflags);
+ spin_unlock_bh(&lock_data->spinlock);
}
EXPORT_SYMBOL(drm_idlelock_take);
@@ -368,9 +364,8 @@
{
unsigned int old, prev;
volatile unsigned int *lock = &lock_data->hw_lock->lock;
- unsigned long irqflags;
- spin_lock_irqsave(&lock_data->spinlock, irqflags);
+ spin_lock_bh(&lock_data->spinlock);
if (--lock_data->kernel_waiters == 0) {
if (lock_data->idle_has_lock) {
do {
@@ -381,7 +376,7 @@
lock_data->idle_has_lock = 0;
}
}
- spin_unlock_irqrestore(&lock_data->spinlock, irqflags);
+ spin_unlock_bh(&lock_data->spinlock);
}
EXPORT_SYMBOL(drm_idlelock_release);
diff --git a/drivers/char/drm/drm_sysfs.c b/drivers/char/drm/drm_sysfs.c
index 9a32169..af211a0 100644
--- a/drivers/char/drm/drm_sysfs.c
+++ b/drivers/char/drm/drm_sysfs.c
@@ -34,8 +34,6 @@
struct drm_minor *drm_minor = to_drm_minor(dev);
struct drm_device *drm_dev = drm_minor->dev;
- printk(KERN_ERR "%s\n", __func__);
-
if (drm_dev->driver->suspend)
return drm_dev->driver->suspend(drm_dev, state);
diff --git a/drivers/char/drm/i915_dma.c b/drivers/char/drm/i915_dma.c
index f47e46e..8897434 100644
--- a/drivers/char/drm/i915_dma.c
+++ b/drivers/char/drm/i915_dma.c
@@ -415,13 +415,10 @@
drm_i915_private_t *dev_priv = dev->dev_private;
RING_LOCALS;
- if (++dev_priv->counter > BREADCRUMB_MASK) {
- dev_priv->counter = 1;
- DRM_DEBUG("Breadcrumb counter wrapped around\n");
- }
+ dev_priv->sarea_priv->last_enqueue = ++dev_priv->counter;
- if (dev_priv->sarea_priv)
- dev_priv->sarea_priv->last_enqueue = dev_priv->counter;
+ if (dev_priv->counter > 0x7FFFFFFFUL)
+ dev_priv->sarea_priv->last_enqueue = dev_priv->counter = 1;
BEGIN_LP_RING(4);
OUT_RING(CMD_STORE_DWORD_IDX);
@@ -431,26 +428,6 @@
ADVANCE_LP_RING();
}
-int i915_emit_mi_flush(struct drm_device *dev, uint32_t flush)
-{
- drm_i915_private_t *dev_priv = dev->dev_private;
- uint32_t flush_cmd = CMD_MI_FLUSH;
- RING_LOCALS;
-
- flush_cmd |= flush;
-
- i915_kernel_lost_context(dev);
-
- BEGIN_LP_RING(4);
- OUT_RING(flush_cmd);
- OUT_RING(0);
- OUT_RING(0);
- OUT_RING(0);
- ADVANCE_LP_RING();
-
- return 0;
-}
-
static int i915_dispatch_cmdbuffer(struct drm_device * dev,
drm_i915_cmdbuffer_t * cmd)
{
@@ -534,74 +511,52 @@
return 0;
}
-static void i915_do_dispatch_flip(struct drm_device * dev, int plane, int sync)
+static int i915_dispatch_flip(struct drm_device * dev)
{
drm_i915_private_t *dev_priv = dev->dev_private;
- u32 num_pages, current_page, next_page, dspbase;
- int shift = 2 * plane, x, y;
RING_LOCALS;
- /* Calculate display base offset */
- num_pages = dev_priv->sarea_priv->third_handle ? 3 : 2;
- current_page = (dev_priv->sarea_priv->pf_current_page >> shift) & 0x3;
- next_page = (current_page + 1) % num_pages;
+ DRM_DEBUG("%s: page=%d pfCurrentPage=%d\n",
+ __FUNCTION__,
+ dev_priv->current_page,
+ dev_priv->sarea_priv->pf_current_page);
- switch (next_page) {
- default:
- case 0:
- dspbase = dev_priv->sarea_priv->front_offset;
- break;
- case 1:
- dspbase = dev_priv->sarea_priv->back_offset;
- break;
- case 2:
- dspbase = dev_priv->sarea_priv->third_offset;
- break;
- }
+ i915_kernel_lost_context(dev);
- if (plane == 0) {
- x = dev_priv->sarea_priv->planeA_x;
- y = dev_priv->sarea_priv->planeA_y;
- } else {
- x = dev_priv->sarea_priv->planeB_x;
- y = dev_priv->sarea_priv->planeB_y;
- }
-
- dspbase += (y * dev_priv->sarea_priv->pitch + x) * dev_priv->cpp;
-
- DRM_DEBUG("plane=%d current_page=%d dspbase=0x%x\n", plane, current_page,
- dspbase);
-
- BEGIN_LP_RING(4);
- OUT_RING(sync ? 0 :
- (MI_WAIT_FOR_EVENT | (plane ? MI_WAIT_FOR_PLANE_B_FLIP :
- MI_WAIT_FOR_PLANE_A_FLIP)));
- OUT_RING(CMD_OP_DISPLAYBUFFER_INFO | (sync ? 0 : ASYNC_FLIP) |
- (plane ? DISPLAY_PLANE_B : DISPLAY_PLANE_A));
- OUT_RING(dev_priv->sarea_priv->pitch * dev_priv->cpp);
- OUT_RING(dspbase);
+ BEGIN_LP_RING(2);
+ OUT_RING(INST_PARSER_CLIENT | INST_OP_FLUSH | INST_FLUSH_MAP_CACHE);
+ OUT_RING(0);
ADVANCE_LP_RING();
- dev_priv->sarea_priv->pf_current_page &= ~(0x3 << shift);
- dev_priv->sarea_priv->pf_current_page |= next_page << shift;
-}
+ BEGIN_LP_RING(6);
+ OUT_RING(CMD_OP_DISPLAYBUFFER_INFO | ASYNC_FLIP);
+ OUT_RING(0);
+ if (dev_priv->current_page == 0) {
+ OUT_RING(dev_priv->back_offset);
+ dev_priv->current_page = 1;
+ } else {
+ OUT_RING(dev_priv->front_offset);
+ dev_priv->current_page = 0;
+ }
+ OUT_RING(0);
+ ADVANCE_LP_RING();
-void i915_dispatch_flip(struct drm_device * dev, int planes, int sync)
-{
- drm_i915_private_t *dev_priv = dev->dev_private;
- int i;
+ BEGIN_LP_RING(2);
+ OUT_RING(MI_WAIT_FOR_EVENT | MI_WAIT_FOR_PLANE_A_FLIP);
+ OUT_RING(0);
+ ADVANCE_LP_RING();
- DRM_DEBUG("planes=0x%x pfCurrentPage=%d\n",
- planes, dev_priv->sarea_priv->pf_current_page);
+ dev_priv->sarea_priv->last_enqueue = dev_priv->counter++;
- i915_emit_mi_flush(dev, MI_READ_FLUSH | MI_EXE_FLUSH);
+ BEGIN_LP_RING(4);
+ OUT_RING(CMD_STORE_DWORD_IDX);
+ OUT_RING(20);
+ OUT_RING(dev_priv->counter);
+ OUT_RING(0);
+ ADVANCE_LP_RING();
- for (i = 0; i < 2; i++)
- if (planes & (1 << i))
- i915_do_dispatch_flip(dev, i, sync);
-
- i915_emit_breadcrumb(dev);
-
+ dev_priv->sarea_priv->pf_current_page = dev_priv->current_page;
+ return 0;
}
static int i915_quiescent(struct drm_device * dev)
@@ -624,6 +579,7 @@
struct drm_file *file_priv)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+ u32 *hw_status = dev_priv->hw_status_page;
drm_i915_sarea_t *sarea_priv = (drm_i915_sarea_t *)
dev_priv->sarea_priv;
drm_i915_batchbuffer_t *batch = data;
@@ -646,7 +602,7 @@
ret = i915_dispatch_batchbuffer(dev, batch);
- sarea_priv->last_dispatch = READ_BREADCRUMB(dev_priv);
+ sarea_priv->last_dispatch = (int)hw_status[5];
return ret;
}
@@ -654,6 +610,7 @@
struct drm_file *file_priv)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+ u32 *hw_status = dev_priv->hw_status_page;
drm_i915_sarea_t *sarea_priv = (drm_i915_sarea_t *)
dev_priv->sarea_priv;
drm_i915_cmdbuffer_t *cmdbuf = data;
@@ -678,51 +635,18 @@
return ret;
}
- sarea_priv->last_dispatch = READ_BREADCRUMB(dev_priv);
- return 0;
-}
-
-static int i915_do_cleanup_pageflip(struct drm_device * dev)
-{
- drm_i915_private_t *dev_priv = dev->dev_private;
- int i, planes, num_pages = dev_priv->sarea_priv->third_handle ? 3 : 2;
-
- DRM_DEBUG("\n");
-
- for (i = 0, planes = 0; i < 2; i++)
- if (dev_priv->sarea_priv->pf_current_page & (0x3 << (2 * i))) {
- dev_priv->sarea_priv->pf_current_page =
- (dev_priv->sarea_priv->pf_current_page &
- ~(0x3 << (2 * i))) | ((num_pages - 1) << (2 * i));
-
- planes |= 1 << i;
- }
-
- if (planes)
- i915_dispatch_flip(dev, planes, 0);
-
+ sarea_priv->last_dispatch = (int)hw_status[5];
return 0;
}
static int i915_flip_bufs(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
- drm_i915_flip_t *param = data;
-
- DRM_DEBUG("\n");
+ DRM_DEBUG("%s\n", __FUNCTION__);
LOCK_TEST_WITH_RETURN(dev, file_priv);
- /* This is really planes */
- if (param->pipes & ~0x3) {
- DRM_ERROR("Invalid planes 0x%x, only <= 0x3 is valid\n",
- param->pipes);
- return -EINVAL;
- }
-
- i915_dispatch_flip(dev, param->pipes, 0);
-
- return 0;
+ return i915_dispatch_flip(dev);
}
static int i915_getparam(struct drm_device *dev, void *data,
@@ -883,8 +807,6 @@
if (!dev_priv)
return;
- if (drm_getsarea(dev) && dev_priv->sarea_priv)
- i915_do_cleanup_pageflip(dev);
if (dev_priv->agp_heap)
i915_mem_takedown(&(dev_priv->agp_heap));
diff --git a/drivers/char/drm/i915_drm.h b/drivers/char/drm/i915_drm.h
index 0431c00..05c66cf 100644
--- a/drivers/char/drm/i915_drm.h
+++ b/drivers/char/drm/i915_drm.h
@@ -105,29 +105,14 @@
unsigned int rotated_tiled;
unsigned int rotated2_tiled;
- int planeA_x;
- int planeA_y;
- int planeA_w;
- int planeA_h;
- int planeB_x;
- int planeB_y;
- int planeB_w;
- int planeB_h;
-
- /* Triple buffering */
- drm_handle_t third_handle;
- int third_offset;
- int third_size;
- unsigned int third_tiled;
-
- /* buffer object handles for the static buffers. May change
- * over the lifetime of the client, though it doesn't in our current
- * implementation.
- */
- unsigned int front_bo_handle;
- unsigned int back_bo_handle;
- unsigned int third_bo_handle;
- unsigned int depth_bo_handle;
+ int pipeA_x;
+ int pipeA_y;
+ int pipeA_w;
+ int pipeA_h;
+ int pipeB_x;
+ int pipeB_y;
+ int pipeB_w;
+ int pipeB_h;
} drm_i915_sarea_t;
/* Flags for perf_boxes
@@ -161,7 +146,7 @@
#define DRM_IOCTL_I915_INIT DRM_IOW( DRM_COMMAND_BASE + DRM_I915_INIT, drm_i915_init_t)
#define DRM_IOCTL_I915_FLUSH DRM_IO ( DRM_COMMAND_BASE + DRM_I915_FLUSH)
-#define DRM_IOCTL_I915_FLIP DRM_IOW( DRM_COMMAND_BASE + DRM_I915_FLIP, drm_i915_flip_t)
+#define DRM_IOCTL_I915_FLIP DRM_IO ( DRM_COMMAND_BASE + DRM_I915_FLIP)
#define DRM_IOCTL_I915_BATCHBUFFER DRM_IOW( DRM_COMMAND_BASE + DRM_I915_BATCHBUFFER, drm_i915_batchbuffer_t)
#define DRM_IOCTL_I915_IRQ_EMIT DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_IRQ_EMIT, drm_i915_irq_emit_t)
#define DRM_IOCTL_I915_IRQ_WAIT DRM_IOW( DRM_COMMAND_BASE + DRM_I915_IRQ_WAIT, drm_i915_irq_wait_t)
@@ -176,18 +161,6 @@
#define DRM_IOCTL_I915_GET_VBLANK_PIPE DRM_IOR( DRM_COMMAND_BASE + DRM_I915_GET_VBLANK_PIPE, drm_i915_vblank_pipe_t)
#define DRM_IOCTL_I915_VBLANK_SWAP DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_VBLANK_SWAP, drm_i915_vblank_swap_t)
-/* Asynchronous page flipping:
- */
-typedef struct drm_i915_flip {
- /*
- * This is really talking about planes, and we could rename it
- * except for the fact that some of the duplicated i915_drm.h files
- * out there check for HAVE_I915_FLIP and so might pick up this
- * version.
- */
- int pipes;
-} drm_i915_flip_t;
-
/* Allow drivers to submit batchbuffers directly to hardware, relying
* on the security mechanisms provided by hardware.
*/
diff --git a/drivers/char/drm/i915_drv.c b/drivers/char/drm/i915_drv.c
index bb8f1b2..e8f3d68 100644
--- a/drivers/char/drm/i915_drv.c
+++ b/drivers/char/drm/i915_drv.c
@@ -147,7 +147,7 @@
i915_write_indexed(cr_index, cr_data, 0x11,
i915_read_indexed(cr_index, cr_data, 0x11) &
(~0x80));
- for (i = 0; i < 0x24; i++)
+ for (i = 0; i <= 0x24; i++)
dev_priv->saveCR[i] =
i915_read_indexed(cr_index, cr_data, i);
/* Make sure we don't turn off CR group 0 writes */
@@ -156,7 +156,7 @@
/* Attribute controller registers */
inb(st01);
dev_priv->saveAR_INDEX = inb(VGA_AR_INDEX);
- for (i = 0; i < 20; i++)
+ for (i = 0; i <= 0x14; i++)
dev_priv->saveAR[i] = i915_read_ar(st01, i, 0);
inb(st01);
outb(dev_priv->saveAR_INDEX, VGA_AR_INDEX);
@@ -206,7 +206,7 @@
/* CRT controller regs */
/* Enable CR group 0 writes */
i915_write_indexed(cr_index, cr_data, 0x11, dev_priv->saveCR[0x11]);
- for (i = 0; i < 0x24; i++)
+ for (i = 0; i <= 0x24; i++)
i915_write_indexed(cr_index, cr_data, i, dev_priv->saveCR[i]);
/* Graphics controller regs */
@@ -223,7 +223,7 @@
/* Attribute controller registers */
inb(st01);
- for (i = 0; i < 20; i++)
+ for (i = 0; i <= 0x14; i++)
i915_write_ar(st01, i, dev_priv->saveAR[i], 0);
inb(st01); /* switch back to index mode */
outb(dev_priv->saveAR_INDEX | 0x20, VGA_AR_INDEX);
@@ -256,6 +256,9 @@
pci_save_state(dev->pdev);
pci_read_config_byte(dev->pdev, LBB, &dev_priv->saveLBB);
+ /* Display arbitration control */
+ dev_priv->saveDSPARB = I915_READ(DSPARB);
+
/* Pipe & plane A info */
dev_priv->savePIPEACONF = I915_READ(PIPEACONF);
dev_priv->savePIPEASRC = I915_READ(PIPEASRC);
@@ -349,6 +352,7 @@
dev_priv->saveVGACNTRL = I915_READ(VGACNTRL);
/* Clock gating state */
+ dev_priv->saveD_STATE = I915_READ(D_STATE);
dev_priv->saveDSPCLK_GATE_D = I915_READ(DSPCLK_GATE_D);
/* Cache mode state */
@@ -388,6 +392,8 @@
pci_write_config_byte(dev->pdev, LBB, dev_priv->saveLBB);
+ I915_WRITE(DSPARB, dev_priv->saveDSPARB);
+
/* Pipe & plane A info */
/* Prime the clock */
if (dev_priv->saveDPLL_A & DPLL_VCO_ENABLE) {
@@ -507,6 +513,7 @@
udelay(150);
/* Clock gating state */
+ I915_WRITE (D_STATE, dev_priv->saveD_STATE);
I915_WRITE (DSPCLK_GATE_D, dev_priv->saveDSPCLK_GATE_D);
/* Cache mode state */
@@ -533,7 +540,8 @@
*/
.driver_features =
DRIVER_USE_AGP | DRIVER_REQUIRE_AGP | /* DRIVER_USE_MTRR |*/
- DRIVER_HAVE_IRQ | DRIVER_IRQ_SHARED,
+ DRIVER_HAVE_IRQ | DRIVER_IRQ_SHARED | DRIVER_IRQ_VBL |
+ DRIVER_IRQ_VBL2,
.load = i915_driver_load,
.unload = i915_driver_unload,
.lastclose = i915_driver_lastclose,
@@ -541,9 +549,8 @@
.suspend = i915_suspend,
.resume = i915_resume,
.device_is_agp = i915_driver_device_is_agp,
- .get_vblank_counter = i915_get_vblank_counter,
- .enable_vblank = i915_enable_vblank,
- .disable_vblank = i915_disable_vblank,
+ .vblank_wait = i915_driver_vblank_wait,
+ .vblank_wait2 = i915_driver_vblank_wait2,
.irq_preinstall = i915_driver_irq_preinstall,
.irq_postinstall = i915_driver_irq_postinstall,
.irq_uninstall = i915_driver_irq_uninstall,
diff --git a/drivers/char/drm/i915_drv.h b/drivers/char/drm/i915_drv.h
index db7001f..1b20f7c 100644
--- a/drivers/char/drm/i915_drv.h
+++ b/drivers/char/drm/i915_drv.h
@@ -76,9 +76,8 @@
typedef struct _drm_i915_vbl_swap {
struct list_head head;
drm_drawable_t drw_id;
- unsigned int plane;
+ unsigned int pipe;
unsigned int sequence;
- int flip;
} drm_i915_vbl_swap_t;
typedef struct drm_i915_private {
@@ -91,7 +90,7 @@
drm_dma_handle_t *status_page_dmah;
void *hw_status_page;
dma_addr_t dma_status_page;
- uint32_t counter;
+ unsigned long counter;
unsigned int status_gfx_addr;
drm_local_map_t hws_map;
@@ -104,18 +103,13 @@
wait_queue_head_t irq_queue;
atomic_t irq_received;
- atomic_t irq_emited;
+ atomic_t irq_emitted;
int tex_lru_log_granularity;
int allow_batchbuffer;
struct mem_block *agp_heap;
unsigned int sr01, adpa, ppcr, dvob, dvoc, lvds;
int vblank_pipe;
- spinlock_t user_irq_lock;
- int user_irq_refcount;
- int fence_irq_on;
- uint32_t irq_enable_reg;
- int irq_enabled;
spinlock_t swaps_lock;
drm_i915_vbl_swap_t vbl_swaps;
@@ -125,6 +119,7 @@
u8 saveLBB;
u32 saveDSPACNTR;
u32 saveDSPBCNTR;
+ u32 saveDSPARB;
u32 savePIPEACONF;
u32 savePIPEBCONF;
u32 savePIPEASRC;
@@ -194,6 +189,7 @@
u32 saveIIR;
u32 saveIMR;
u32 saveCACHE_MODE_0;
+ u32 saveD_STATE;
u32 saveDSPCLK_GATE_D;
u32 saveMI_ARB_STATE;
u32 saveSWF0[16];
@@ -203,10 +199,10 @@
u8 saveSR[8];
u8 saveGR[25];
u8 saveAR_INDEX;
- u8 saveAR[20];
+ u8 saveAR[21];
u8 saveDACMASK;
u8 saveDACDATA[256*3]; /* 256 3-byte colors */
- u8 saveCR[36];
+ u8 saveCR[37];
} drm_i915_private_t;
extern struct drm_ioctl_desc i915_ioctls[];
@@ -222,7 +218,7 @@
extern int i915_driver_device_is_agp(struct drm_device * dev);
extern long i915_compat_ioctl(struct file *filp, unsigned int cmd,
unsigned long arg);
-extern void i915_dispatch_flip(struct drm_device * dev, int pipes, int sync);
+
/* i915_irq.c */
extern int i915_irq_emit(struct drm_device *dev, void *data,
struct drm_file *file_priv);
@@ -233,7 +229,7 @@
extern int i915_driver_vblank_wait2(struct drm_device *dev, unsigned int *sequence);
extern irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS);
extern void i915_driver_irq_preinstall(struct drm_device * dev);
-extern int i915_driver_irq_postinstall(struct drm_device * dev);
+extern void i915_driver_irq_postinstall(struct drm_device * dev);
extern void i915_driver_irq_uninstall(struct drm_device * dev);
extern int i915_vblank_pipe_set(struct drm_device *dev, void *data,
struct drm_file *file_priv);
@@ -241,9 +237,6 @@
struct drm_file *file_priv);
extern int i915_vblank_swap(struct drm_device *dev, void *data,
struct drm_file *file_priv);
-extern int i915_enable_vblank(struct drm_device *dev, int crtc);
-extern void i915_disable_vblank(struct drm_device *dev, int crtc);
-extern u32 i915_get_vblank_counter(struct drm_device *dev, int crtc);
/* i915_mem.c */
extern int i915_mem_alloc(struct drm_device *dev, void *data,
@@ -388,91 +381,21 @@
/* Interrupt bits:
*/
-#define I915_PIPE_CONTROL_NOTIFY_INTERRUPT (1<<18)
-#define I915_DISPLAY_PORT_INTERRUPT (1<<17)
-#define I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT (1<<15)
-#define I915_GMCH_THERMAL_SENSOR_EVENT_INTERRUPT (1<<14)
-#define I915_HWB_OOM_INTERRUPT (1<<13) /* binner out of memory */
-#define I915_SYNC_STATUS_INTERRUPT (1<<12)
-#define I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT (1<<11)
-#define I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT (1<<10)
-#define I915_OVERLAY_PLANE_FLIP_PENDING_INTERRUPT (1<<9)
-#define I915_DISPLAY_PLANE_C_FLIP_PENDING_INTERRUPT (1<<8)
-#define I915_DISPLAY_PIPE_A_VBLANK_INTERRUPT (1<<7)
-#define I915_DISPLAY_PIPE_A_EVENT_INTERRUPT (1<<6)
-#define I915_DISPLAY_PIPE_B_VBLANK_INTERRUPT (1<<5)
-#define I915_DISPLAY_PIPE_B_EVENT_INTERRUPT (1<<4)
-#define I915_DEBUG_INTERRUPT (1<<2)
-#define I915_USER_INTERRUPT (1<<1)
-
+#define USER_INT_FLAG (1<<1)
+#define VSYNC_PIPEB_FLAG (1<<5)
+#define VSYNC_PIPEA_FLAG (1<<7)
+#define HWB_OOM_FLAG (1<<13) /* binner out of memory */
#define I915REG_HWSTAM 0x02098
#define I915REG_INT_IDENTITY_R 0x020a4
#define I915REG_INT_MASK_R 0x020a8
#define I915REG_INT_ENABLE_R 0x020a0
-#define I915REG_INSTPM 0x020c0
-
-#define PIPEADSL 0x70000
-#define PIPEBDSL 0x71000
#define I915REG_PIPEASTAT 0x70024
#define I915REG_PIPEBSTAT 0x71024
-/*
- * The two pipe frame counter registers are not synchronized, so
- * reading a stable value is somewhat tricky. The following code
- * should work:
- *
- * do {
- * high1 = ((INREG(PIPEAFRAMEHIGH) & PIPE_FRAME_HIGH_MASK) >>
- * PIPE_FRAME_HIGH_SHIFT;
- * low1 = ((INREG(PIPEAFRAMEPIXEL) & PIPE_FRAME_LOW_MASK) >>
- * PIPE_FRAME_LOW_SHIFT);
- * high2 = ((INREG(PIPEAFRAMEHIGH) & PIPE_FRAME_HIGH_MASK) >>
- * PIPE_FRAME_HIGH_SHIFT);
- * } while (high1 != high2);
- * frame = (high1 << 8) | low1;
- */
-#define PIPEAFRAMEHIGH 0x70040
-#define PIPEBFRAMEHIGH 0x71040
-#define PIPE_FRAME_HIGH_MASK 0x0000ffff
-#define PIPE_FRAME_HIGH_SHIFT 0
-#define PIPEAFRAMEPIXEL 0x70044
-#define PIPEBFRAMEPIXEL 0x71044
-#define PIPE_FRAME_LOW_MASK 0xff000000
-#define PIPE_FRAME_LOW_SHIFT 24
-/*
- * Pixel within the current frame is counted in the PIPEAFRAMEPIXEL register
- * and is 24 bits wide.
- */
-#define PIPE_PIXEL_MASK 0x00ffffff
-#define PIPE_PIXEL_SHIFT 0
-
-#define I915_FIFO_UNDERRUN_STATUS (1UL<<31)
-#define I915_CRC_ERROR_ENABLE (1UL<<29)
-#define I915_CRC_DONE_ENABLE (1UL<<28)
-#define I915_GMBUS_EVENT_ENABLE (1UL<<27)
-#define I915_VSYNC_INTERRUPT_ENABLE (1UL<<25)
-#define I915_DISPLAY_LINE_COMPARE_ENABLE (1UL<<24)
-#define I915_DPST_EVENT_ENABLE (1UL<<23)
-#define I915_LEGACY_BLC_EVENT_ENABLE (1UL<<22)
-#define I915_ODD_FIELD_INTERRUPT_ENABLE (1UL<<21)
-#define I915_EVEN_FIELD_INTERRUPT_ENABLE (1UL<<20)
-#define I915_START_VBLANK_INTERRUPT_ENABLE (1UL<<18) /* 965 or later */
-#define I915_VBLANK_INTERRUPT_ENABLE (1UL<<17)
-#define I915_OVERLAY_UPDATED_ENABLE (1UL<<16)
-#define I915_CRC_ERROR_INTERRUPT_STATUS (1UL<<13)
-#define I915_CRC_DONE_INTERRUPT_STATUS (1UL<<12)
-#define I915_GMBUS_INTERRUPT_STATUS (1UL<<11)
-#define I915_VSYNC_INTERRUPT_STATUS (1UL<<9)
-#define I915_DISPLAY_LINE_COMPARE_STATUS (1UL<<8)
-#define I915_DPST_EVENT_STATUS (1UL<<7)
-#define I915_LEGACY_BLC_EVENT_STATUS (1UL<<6)
-#define I915_ODD_FIELD_INTERRUPT_STATUS (1UL<<5)
-#define I915_EVEN_FIELD_INTERRUPT_STATUS (1UL<<4)
-#define I915_START_VBLANK_INTERRUPT_STATUS (1UL<<2) /* 965 or later */
-#define I915_VBLANK_INTERRUPT_STATUS (1UL<<1)
-#define I915_OVERLAY_UPDATED_STATUS (1UL<<0)
+#define I915_VBLANK_INTERRUPT_ENABLE (1UL<<17)
+#define I915_VBLANK_CLEAR (1UL<<1)
#define SRX_INDEX 0x3c4
#define SRX_DATA 0x3c5
@@ -749,6 +672,8 @@
/** P1 value is 2 greater than this field */
# define VGA0_PD_P1_MASK (0x1f << 0)
+/* PCI D state control register */
+#define D_STATE 0x6104
#define DSPCLK_GATE_D 0x6200
/* I830 CRTC registers */
@@ -1059,6 +984,12 @@
#define PIPECONF_INTERLACE_W_FIELD_INDICATION (6 << 21)
#define PIPECONF_INTERLACE_FIELD_0_ONLY (7 << 21)
+#define DSPARB 0x70030
+#define DSPARB_CSTART_MASK (0x7f << 7)
+#define DSPARB_CSTART_SHIFT 7
+#define DSPARB_BSTART_MASK (0x7f)
+#define DSPARB_BSTART_SHIFT 0
+
#define PIPEBCONF 0x71008
#define PIPEBCONF_ENABLE (1<<31)
#define PIPEBCONF_DISABLE 0
diff --git a/drivers/char/drm/i915_irq.c b/drivers/char/drm/i915_irq.c
index 023ce66..f7f16e7 100644
--- a/drivers/char/drm/i915_irq.c
+++ b/drivers/char/drm/i915_irq.c
@@ -38,109 +38,6 @@
#define MAX_NOPID ((u32)~0)
/**
- * i915_get_pipe - return the the pipe associated with a given plane
- * @dev: DRM device
- * @plane: plane to look for
- *
- * The Intel Mesa & 2D drivers call the vblank routines with a plane number
- * rather than a pipe number, since they may not always be equal. This routine
- * maps the given @plane back to a pipe number.
- */
-static int
-i915_get_pipe(struct drm_device *dev, int plane)
-{
- drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
- u32 dspcntr;
-
- dspcntr = plane ? I915_READ(DSPBCNTR) : I915_READ(DSPACNTR);
-
- return dspcntr & DISPPLANE_SEL_PIPE_MASK ? 1 : 0;
-}
-
-/**
- * i915_get_plane - return the the plane associated with a given pipe
- * @dev: DRM device
- * @pipe: pipe to look for
- *
- * The Intel Mesa & 2D drivers call the vblank routines with a plane number
- * rather than a plane number, since they may not always be equal. This routine
- * maps the given @pipe back to a plane number.
- */
-static int
-i915_get_plane(struct drm_device *dev, int pipe)
-{
- if (i915_get_pipe(dev, 0) == pipe)
- return 0;
- return 1;
-}
-
-/**
- * i915_pipe_enabled - check if a pipe is enabled
- * @dev: DRM device
- * @pipe: pipe to check
- *
- * Reading certain registers when the pipe is disabled can hang the chip.
- * Use this routine to make sure the PLL is running and the pipe is active
- * before reading such registers if unsure.
- */
-static int
-i915_pipe_enabled(struct drm_device *dev, int pipe)
-{
- drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
- unsigned long pipeconf = pipe ? PIPEBCONF : PIPEACONF;
-
- if (I915_READ(pipeconf) & PIPEACONF_ENABLE)
- return 1;
-
- return 0;
-}
-
-/**
- * Emit a synchronous flip.
- *
- * This function must be called with the drawable spinlock held.
- */
-static void
-i915_dispatch_vsync_flip(struct drm_device *dev, struct drm_drawable_info *drw,
- int plane)
-{
- drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
- drm_i915_sarea_t *sarea_priv = dev_priv->sarea_priv;
- u16 x1, y1, x2, y2;
- int pf_planes = 1 << plane;
-
- /* If the window is visible on the other plane, we have to flip on that
- * plane as well.
- */
- if (plane == 1) {
- x1 = sarea_priv->planeA_x;
- y1 = sarea_priv->planeA_y;
- x2 = x1 + sarea_priv->planeA_w;
- y2 = y1 + sarea_priv->planeA_h;
- } else {
- x1 = sarea_priv->planeB_x;
- y1 = sarea_priv->planeB_y;
- x2 = x1 + sarea_priv->planeB_w;
- y2 = y1 + sarea_priv->planeB_h;
- }
-
- if (x2 > 0 && y2 > 0) {
- int i, num_rects = drw->num_rects;
- struct drm_clip_rect *rect = drw->rects;
-
- for (i = 0; i < num_rects; i++)
- if (!(rect[i].x1 >= x2 || rect[i].y1 >= y2 ||
- rect[i].x2 <= x1 || rect[i].y2 <= y1)) {
- pf_planes = 0x3;
-
- break;
- }
- }
-
- i915_dispatch_flip(dev, pf_planes, 1);
-}
-
-/**
* Emit blits for scheduled buffer swaps.
*
* This function will be called with the HW lock held.
@@ -148,19 +45,20 @@
static void i915_vblank_tasklet(struct drm_device *dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+ unsigned long irqflags;
struct list_head *list, *tmp, hits, *hit;
- int nhits, nrects, slice[2], upper[2], lower[2], i, num_pages;
- unsigned counter[2];
+ int nhits, nrects, slice[2], upper[2], lower[2], i;
+ unsigned counter[2] = { atomic_read(&dev->vbl_received),
+ atomic_read(&dev->vbl_received2) };
struct drm_drawable_info *drw;
drm_i915_sarea_t *sarea_priv = dev_priv->sarea_priv;
- u32 cpp = dev_priv->cpp, offsets[3];
+ u32 cpp = dev_priv->cpp;
u32 cmd = (cpp == 4) ? (XY_SRC_COPY_BLT_CMD |
XY_SRC_COPY_BLT_WRITE_ALPHA |
XY_SRC_COPY_BLT_WRITE_RGB)
: XY_SRC_COPY_BLT_CMD;
u32 src_pitch = sarea_priv->pitch * cpp;
u32 dst_pitch = sarea_priv->pitch * cpp;
- /* COPY rop (0xcc), map cpp to magic color depth constants */
u32 ropcpp = (0xcc << 16) | ((cpp - 1) << 24);
RING_LOCALS;
@@ -173,34 +71,24 @@
src_pitch >>= 2;
}
- counter[0] = drm_vblank_count(dev, 0);
- counter[1] = drm_vblank_count(dev, 1);
-
DRM_DEBUG("\n");
INIT_LIST_HEAD(&hits);
nhits = nrects = 0;
- /* No irqsave/restore necessary. This tasklet may be run in an
- * interrupt context or normal context, but we don't have to worry
- * about getting interrupted by something acquiring the lock, because
- * we are the interrupt context thing that acquires the lock.
- */
- spin_lock(&dev_priv->swaps_lock);
+ spin_lock_irqsave(&dev_priv->swaps_lock, irqflags);
/* Find buffer swaps scheduled for this vertical blank */
list_for_each_safe(list, tmp, &dev_priv->vbl_swaps.head) {
drm_i915_vbl_swap_t *vbl_swap =
list_entry(list, drm_i915_vbl_swap_t, head);
- int pipe = i915_get_pipe(dev, vbl_swap->plane);
- if ((counter[pipe] - vbl_swap->sequence) > (1<<23))
+ if ((counter[vbl_swap->pipe] - vbl_swap->sequence) > (1<<23))
continue;
list_del(list);
dev_priv->swaps_pending--;
- drm_vblank_put(dev, pipe);
spin_unlock(&dev_priv->swaps_lock);
spin_lock(&dev->drw_lock);
@@ -238,23 +126,43 @@
spin_lock(&dev_priv->swaps_lock);
}
- spin_unlock(&dev_priv->swaps_lock);
-
- if (nhits == 0)
+ if (nhits == 0) {
+ spin_unlock_irqrestore(&dev_priv->swaps_lock, irqflags);
return;
+ }
+
+ spin_unlock(&dev_priv->swaps_lock);
i915_kernel_lost_context(dev);
- upper[0] = upper[1] = 0;
- slice[0] = max(sarea_priv->planeA_h / nhits, 1);
- slice[1] = max(sarea_priv->planeB_h / nhits, 1);
- lower[0] = sarea_priv->planeA_y + slice[0];
- lower[1] = sarea_priv->planeB_y + slice[0];
+ if (IS_I965G(dev)) {
+ BEGIN_LP_RING(4);
- offsets[0] = sarea_priv->front_offset;
- offsets[1] = sarea_priv->back_offset;
- offsets[2] = sarea_priv->third_offset;
- num_pages = sarea_priv->third_handle ? 3 : 2;
+ OUT_RING(GFX_OP_DRAWRECT_INFO_I965);
+ OUT_RING(0);
+ OUT_RING(((sarea_priv->width - 1) & 0xffff) | ((sarea_priv->height - 1) << 16));
+ OUT_RING(0);
+ ADVANCE_LP_RING();
+ } else {
+ BEGIN_LP_RING(6);
+
+ OUT_RING(GFX_OP_DRAWRECT_INFO);
+ OUT_RING(0);
+ OUT_RING(0);
+ OUT_RING(sarea_priv->width | sarea_priv->height << 16);
+ OUT_RING(sarea_priv->width | sarea_priv->height << 16);
+ OUT_RING(0);
+
+ ADVANCE_LP_RING();
+ }
+
+ sarea_priv->ctxOwner = DRM_KERNEL_CONTEXT;
+
+ upper[0] = upper[1] = 0;
+ slice[0] = max(sarea_priv->pipeA_h / nhits, 1);
+ slice[1] = max(sarea_priv->pipeB_h / nhits, 1);
+ lower[0] = sarea_priv->pipeA_y + slice[0];
+ lower[1] = sarea_priv->pipeB_y + slice[0];
spin_lock(&dev->drw_lock);
@@ -266,8 +174,6 @@
for (i = 0; i++ < nhits;
upper[0] = lower[0], lower[0] += slice[0],
upper[1] = lower[1], lower[1] += slice[1]) {
- int init_drawrect = 1;
-
if (i == nhits)
lower[0] = lower[1] = sarea_priv->height;
@@ -275,7 +181,7 @@
drm_i915_vbl_swap_t *swap_hit =
list_entry(hit, drm_i915_vbl_swap_t, head);
struct drm_clip_rect *rect;
- int num_rects, plane, front, back;
+ int num_rects, pipe;
unsigned short top, bottom;
drw = drm_get_drawable_info(dev, swap_hit->drw_id);
@@ -283,50 +189,10 @@
if (!drw)
continue;
- plane = swap_hit->plane;
-
- if (swap_hit->flip) {
- i915_dispatch_vsync_flip(dev, drw, plane);
- continue;
- }
-
- if (init_drawrect) {
- int width = sarea_priv->width;
- int height = sarea_priv->height;
- if (IS_I965G(dev)) {
- BEGIN_LP_RING(4);
-
- OUT_RING(GFX_OP_DRAWRECT_INFO_I965);
- OUT_RING(0);
- OUT_RING(((width - 1) & 0xffff) | ((height - 1) << 16));
- OUT_RING(0);
-
- ADVANCE_LP_RING();
- } else {
- BEGIN_LP_RING(6);
-
- OUT_RING(GFX_OP_DRAWRECT_INFO);
- OUT_RING(0);
- OUT_RING(0);
- OUT_RING(((width - 1) & 0xffff) | ((height - 1) << 16));
- OUT_RING(0);
- OUT_RING(0);
-
- ADVANCE_LP_RING();
- }
-
- sarea_priv->ctxOwner = DRM_KERNEL_CONTEXT;
-
- init_drawrect = 0;
- }
-
rect = drw->rects;
- top = upper[plane];
- bottom = lower[plane];
-
- front = (dev_priv->sarea_priv->pf_current_page >>
- (2 * plane)) & 0x3;
- back = (front + 1) % num_pages;
+ pipe = swap_hit->pipe;
+ top = upper[pipe];
+ bottom = lower[pipe];
for (num_rects = drw->num_rects; num_rects--; rect++) {
int y1 = max(rect->y1, top);
@@ -341,17 +207,17 @@
OUT_RING(ropcpp | dst_pitch);
OUT_RING((y1 << 16) | rect->x1);
OUT_RING((y2 << 16) | rect->x2);
- OUT_RING(offsets[front]);
+ OUT_RING(sarea_priv->front_offset);
OUT_RING((y1 << 16) | rect->x1);
OUT_RING(src_pitch);
- OUT_RING(offsets[back]);
+ OUT_RING(sarea_priv->back_offset);
ADVANCE_LP_RING();
}
}
}
- spin_unlock(&dev->drw_lock);
+ spin_unlock_irqrestore(&dev->drw_lock, irqflags);
list_for_each_safe(hit, tmp, &hits) {
drm_i915_vbl_swap_t *swap_hit =
@@ -363,112 +229,67 @@
}
}
-u32 i915_get_vblank_counter(struct drm_device *dev, int plane)
-{
- drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
- unsigned long high_frame;
- unsigned long low_frame;
- u32 high1, high2, low, count;
- int pipe;
-
- pipe = i915_get_pipe(dev, plane);
- high_frame = pipe ? PIPEBFRAMEHIGH : PIPEAFRAMEHIGH;
- low_frame = pipe ? PIPEBFRAMEPIXEL : PIPEAFRAMEPIXEL;
-
- if (!i915_pipe_enabled(dev, pipe)) {
- printk(KERN_ERR "trying to get vblank count for disabled "
- "pipe %d\n", pipe);
- return 0;
- }
-
- /*
- * High & low register fields aren't synchronized, so make sure
- * we get a low value that's stable across two reads of the high
- * register.
- */
- do {
- high1 = ((I915_READ(high_frame) & PIPE_FRAME_HIGH_MASK) >>
- PIPE_FRAME_HIGH_SHIFT);
- low = ((I915_READ(low_frame) & PIPE_FRAME_LOW_MASK) >>
- PIPE_FRAME_LOW_SHIFT);
- high2 = ((I915_READ(high_frame) & PIPE_FRAME_HIGH_MASK) >>
- PIPE_FRAME_HIGH_SHIFT);
- } while (high1 != high2);
-
- count = (high1 << 8) | low;
-
- /* count may be reset by other driver(e.g. 2D driver),
- we have no way to know if it is wrapped or resetted
- when count is zero. do a rough guess.
- */
- if (count == 0 && dev->last_vblank[pipe] < dev->max_vblank_count/2)
- dev->last_vblank[pipe] = 0;
-
- return count;
-}
-
irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS)
{
struct drm_device *dev = (struct drm_device *) arg;
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
- u32 iir;
+ u16 temp;
u32 pipea_stats, pipeb_stats;
- int vblank = 0;
- iir = I915_READ(I915REG_INT_IDENTITY_R);
- if (iir == 0) {
- DRM_DEBUG ("iir 0x%08x im 0x%08x ie 0x%08x pipea 0x%08x pipeb 0x%08x\n",
- iir,
- I915_READ(I915REG_INT_MASK_R),
- I915_READ(I915REG_INT_ENABLE_R),
- I915_READ(I915REG_PIPEASTAT),
- I915_READ(I915REG_PIPEBSTAT));
+ pipea_stats = I915_READ(I915REG_PIPEASTAT);
+ pipeb_stats = I915_READ(I915REG_PIPEBSTAT);
+
+ temp = I915_READ16(I915REG_INT_IDENTITY_R);
+
+ temp &= (USER_INT_FLAG | VSYNC_PIPEA_FLAG | VSYNC_PIPEB_FLAG);
+
+ DRM_DEBUG("%s flag=%08x\n", __FUNCTION__, temp);
+
+ if (temp == 0)
return IRQ_NONE;
- }
- /*
- * Clear the PIPE(A|B)STAT regs before the IIR otherwise
- * we may get extra interrupts.
- */
- if (iir & I915_DISPLAY_PIPE_A_EVENT_INTERRUPT) {
- pipea_stats = I915_READ(I915REG_PIPEASTAT);
- if (pipea_stats & (I915_START_VBLANK_INTERRUPT_STATUS|
- I915_VBLANK_INTERRUPT_STATUS))
- {
- vblank++;
- drm_handle_vblank(dev, i915_get_plane(dev, 0));
- }
- I915_WRITE(I915REG_PIPEASTAT, pipea_stats);
- }
- if (iir & I915_DISPLAY_PIPE_B_EVENT_INTERRUPT) {
- pipeb_stats = I915_READ(I915REG_PIPEBSTAT);
- if (pipeb_stats & (I915_START_VBLANK_INTERRUPT_STATUS|
- I915_VBLANK_INTERRUPT_STATUS))
- {
- vblank++;
- drm_handle_vblank(dev, i915_get_plane(dev, 1));
- }
- I915_WRITE(I915REG_PIPEBSTAT, pipeb_stats);
- }
+ I915_WRITE16(I915REG_INT_IDENTITY_R, temp);
+ (void) I915_READ16(I915REG_INT_IDENTITY_R);
+ DRM_READMEMORYBARRIER();
- if (dev_priv->sarea_priv)
- dev_priv->sarea_priv->last_dispatch = READ_BREADCRUMB(dev_priv);
+ dev_priv->sarea_priv->last_dispatch = READ_BREADCRUMB(dev_priv);
- I915_WRITE(I915REG_INT_IDENTITY_R, iir);
- (void) I915_READ(I915REG_INT_IDENTITY_R); /* Flush posted write */
-
- if (iir & I915_USER_INTERRUPT) {
+ if (temp & USER_INT_FLAG)
DRM_WAKEUP(&dev_priv->irq_queue);
- }
- if (vblank) {
+
+ if (temp & (VSYNC_PIPEA_FLAG | VSYNC_PIPEB_FLAG)) {
+ int vblank_pipe = dev_priv->vblank_pipe;
+
+ if ((vblank_pipe &
+ (DRM_I915_VBLANK_PIPE_A | DRM_I915_VBLANK_PIPE_B))
+ == (DRM_I915_VBLANK_PIPE_A | DRM_I915_VBLANK_PIPE_B)) {
+ if (temp & VSYNC_PIPEA_FLAG)
+ atomic_inc(&dev->vbl_received);
+ if (temp & VSYNC_PIPEB_FLAG)
+ atomic_inc(&dev->vbl_received2);
+ } else if (((temp & VSYNC_PIPEA_FLAG) &&
+ (vblank_pipe & DRM_I915_VBLANK_PIPE_A)) ||
+ ((temp & VSYNC_PIPEB_FLAG) &&
+ (vblank_pipe & DRM_I915_VBLANK_PIPE_B)))
+ atomic_inc(&dev->vbl_received);
+
+ DRM_WAKEUP(&dev->vbl_queue);
+ drm_vbl_send_signals(dev);
+
if (dev_priv->swaps_pending > 0)
drm_locked_tasklet(dev, i915_vblank_tasklet);
+ I915_WRITE(I915REG_PIPEASTAT,
+ pipea_stats|I915_VBLANK_INTERRUPT_ENABLE|
+ I915_VBLANK_CLEAR);
+ I915_WRITE(I915REG_PIPEBSTAT,
+ pipeb_stats|I915_VBLANK_INTERRUPT_ENABLE|
+ I915_VBLANK_CLEAR);
}
return IRQ_HANDLED;
}
-static int i915_emit_irq(struct drm_device *dev)
+static int i915_emit_irq(struct drm_device * dev)
{
drm_i915_private_t *dev_priv = dev->dev_private;
RING_LOCALS;
@@ -515,12 +336,42 @@
READ_BREADCRUMB(dev_priv), (int)dev_priv->counter);
}
- if (dev_priv->sarea_priv)
- dev_priv->sarea_priv->last_dispatch =
- READ_BREADCRUMB(dev_priv);
+ dev_priv->sarea_priv->last_dispatch = READ_BREADCRUMB(dev_priv);
return ret;
}
+static int i915_driver_vblank_do_wait(struct drm_device *dev, unsigned int *sequence,
+ atomic_t *counter)
+{
+ drm_i915_private_t *dev_priv = dev->dev_private;
+ unsigned int cur_vblank;
+ int ret = 0;
+
+ if (!dev_priv) {
+ DRM_ERROR("called with no initialization\n");
+ return -EINVAL;
+ }
+
+ DRM_WAIT_ON(ret, dev->vbl_queue, 3 * DRM_HZ,
+ (((cur_vblank = atomic_read(counter))
+ - *sequence) <= (1<<23)));
+
+ *sequence = cur_vblank;
+
+ return ret;
+}
+
+
+int i915_driver_vblank_wait(struct drm_device *dev, unsigned int *sequence)
+{
+ return i915_driver_vblank_do_wait(dev, sequence, &dev->vbl_received);
+}
+
+int i915_driver_vblank_wait2(struct drm_device *dev, unsigned int *sequence)
+{
+ return i915_driver_vblank_do_wait(dev, sequence, &dev->vbl_received2);
+}
+
/* Needs the lock as it touches the ring.
*/
int i915_irq_emit(struct drm_device *dev, void *data,
@@ -563,96 +414,18 @@
return i915_wait_irq(dev, irqwait->irq_seq);
}
-int i915_enable_vblank(struct drm_device *dev, int plane)
-{
- drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
- int pipe = i915_get_pipe(dev, plane);
- u32 pipestat_reg = 0;
- u32 pipestat;
-
- switch (pipe) {
- case 0:
- pipestat_reg = I915REG_PIPEASTAT;
- dev_priv->irq_enable_reg |= I915_DISPLAY_PIPE_A_EVENT_INTERRUPT;
- break;
- case 1:
- pipestat_reg = I915REG_PIPEBSTAT;
- dev_priv->irq_enable_reg |= I915_DISPLAY_PIPE_B_EVENT_INTERRUPT;
- break;
- default:
- DRM_ERROR("tried to enable vblank on non-existent pipe %d\n",
- pipe);
- break;
- }
-
- if (pipestat_reg)
- {
- pipestat = I915_READ (pipestat_reg);
- /*
- * Older chips didn't have the start vblank interrupt,
- * but
- */
- if (IS_I965G (dev))
- pipestat |= I915_START_VBLANK_INTERRUPT_ENABLE;
- else
- pipestat |= I915_VBLANK_INTERRUPT_ENABLE;
- /*
- * Clear any pending status
- */
- pipestat |= (I915_START_VBLANK_INTERRUPT_STATUS |
- I915_VBLANK_INTERRUPT_STATUS);
- I915_WRITE(pipestat_reg, pipestat);
- }
- I915_WRITE(I915REG_INT_ENABLE_R, dev_priv->irq_enable_reg);
-
- return 0;
-}
-
-void i915_disable_vblank(struct drm_device *dev, int plane)
-{
- drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
- int pipe = i915_get_pipe(dev, plane);
- u32 pipestat_reg = 0;
- u32 pipestat;
-
- switch (pipe) {
- case 0:
- pipestat_reg = I915REG_PIPEASTAT;
- dev_priv->irq_enable_reg &= ~I915_DISPLAY_PIPE_A_EVENT_INTERRUPT;
- break;
- case 1:
- pipestat_reg = I915REG_PIPEBSTAT;
- dev_priv->irq_enable_reg &= ~I915_DISPLAY_PIPE_B_EVENT_INTERRUPT;
- break;
- default:
- DRM_ERROR("tried to disable vblank on non-existent pipe %d\n",
- pipe);
- break;
- }
-
- I915_WRITE(I915REG_INT_ENABLE_R, dev_priv->irq_enable_reg);
- if (pipestat_reg)
- {
- pipestat = I915_READ (pipestat_reg);
- pipestat &= ~(I915_START_VBLANK_INTERRUPT_ENABLE |
- I915_VBLANK_INTERRUPT_ENABLE);
- /*
- * Clear any pending status
- */
- pipestat |= (I915_START_VBLANK_INTERRUPT_STATUS |
- I915_VBLANK_INTERRUPT_STATUS);
- I915_WRITE(pipestat_reg, pipestat);
- }
-}
-
static void i915_enable_interrupt (struct drm_device *dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
+ u16 flag;
- dev_priv->irq_enable_reg |= I915_USER_INTERRUPT;
+ flag = 0;
+ if (dev_priv->vblank_pipe & DRM_I915_VBLANK_PIPE_A)
+ flag |= VSYNC_PIPEA_FLAG;
+ if (dev_priv->vblank_pipe & DRM_I915_VBLANK_PIPE_B)
+ flag |= VSYNC_PIPEB_FLAG;
- I915_WRITE(I915REG_INT_ENABLE_R, dev_priv->irq_enable_reg);
- dev_priv->irq_enabled = 1;
+ I915_WRITE16(I915REG_INT_ENABLE_R, USER_INT_FLAG | flag);
}
/* Set the vblank monitor pipe
@@ -675,6 +448,8 @@
dev_priv->vblank_pipe = pipe->pipe;
+ i915_enable_interrupt (dev);
+
return 0;
}
@@ -692,9 +467,9 @@
flag = I915_READ(I915REG_INT_ENABLE_R);
pipe->pipe = 0;
- if (flag & I915_DISPLAY_PIPE_A_EVENT_INTERRUPT)
+ if (flag & VSYNC_PIPEA_FLAG)
pipe->pipe |= DRM_I915_VBLANK_PIPE_A;
- if (flag & I915_DISPLAY_PIPE_B_EVENT_INTERRUPT)
+ if (flag & VSYNC_PIPEB_FLAG)
pipe->pipe |= DRM_I915_VBLANK_PIPE_B;
return 0;
@@ -709,30 +484,27 @@
drm_i915_private_t *dev_priv = dev->dev_private;
drm_i915_vblank_swap_t *swap = data;
drm_i915_vbl_swap_t *vbl_swap;
- unsigned int pipe, seqtype, curseq, plane;
+ unsigned int pipe, seqtype, curseq;
unsigned long irqflags;
struct list_head *list;
- int ret;
if (!dev_priv) {
DRM_ERROR("%s called with no initialization\n", __func__);
return -EINVAL;
}
- if (!dev_priv->sarea_priv || dev_priv->sarea_priv->rotation) {
+ if (dev_priv->sarea_priv->rotation) {
DRM_DEBUG("Rotation not supported\n");
return -EINVAL;
}
if (swap->seqtype & ~(_DRM_VBLANK_RELATIVE | _DRM_VBLANK_ABSOLUTE |
- _DRM_VBLANK_SECONDARY | _DRM_VBLANK_NEXTONMISS |
- _DRM_VBLANK_FLIP)) {
+ _DRM_VBLANK_SECONDARY | _DRM_VBLANK_NEXTONMISS)) {
DRM_ERROR("Invalid sequence type 0x%x\n", swap->seqtype);
return -EINVAL;
}
- plane = (swap->seqtype & _DRM_VBLANK_SECONDARY) ? 1 : 0;
- pipe = i915_get_pipe(dev, plane);
+ pipe = (swap->seqtype & _DRM_VBLANK_SECONDARY) ? 1 : 0;
seqtype = swap->seqtype & (_DRM_VBLANK_RELATIVE | _DRM_VBLANK_ABSOLUTE);
@@ -743,11 +515,6 @@
spin_lock_irqsave(&dev->drw_lock, irqflags);
- /* It makes no sense to schedule a swap for a drawable that doesn't have
- * valid information at this point. E.g. this could mean that the X
- * server is too old to push drawable information to the DRM, in which
- * case all such swaps would become ineffective.
- */
if (!drm_get_drawable_info(dev, swap->drawable)) {
spin_unlock_irqrestore(&dev->drw_lock, irqflags);
DRM_DEBUG("Invalid drawable ID %d\n", swap->drawable);
@@ -756,8 +523,7 @@
spin_unlock_irqrestore(&dev->drw_lock, irqflags);
- drm_update_vblank_count(dev, pipe);
- curseq = drm_vblank_count(dev, pipe);
+ curseq = atomic_read(pipe ? &dev->vbl_received2 : &dev->vbl_received);
if (seqtype == _DRM_VBLANK_RELATIVE)
swap->sequence += curseq;
@@ -771,43 +537,14 @@
}
}
- if (swap->seqtype & _DRM_VBLANK_FLIP) {
- swap->sequence--;
-
- if ((curseq - swap->sequence) <= (1<<23)) {
- struct drm_drawable_info *drw;
-
- LOCK_TEST_WITH_RETURN(dev, file_priv);
-
- spin_lock_irqsave(&dev->drw_lock, irqflags);
-
- drw = drm_get_drawable_info(dev, swap->drawable);
-
- if (!drw) {
- spin_unlock_irqrestore(&dev->drw_lock,
- irqflags);
- DRM_DEBUG("Invalid drawable ID %d\n",
- swap->drawable);
- return -EINVAL;
- }
-
- i915_dispatch_vsync_flip(dev, drw, plane);
-
- spin_unlock_irqrestore(&dev->drw_lock, irqflags);
-
- return 0;
- }
- }
-
spin_lock_irqsave(&dev_priv->swaps_lock, irqflags);
list_for_each(list, &dev_priv->vbl_swaps.head) {
vbl_swap = list_entry(list, drm_i915_vbl_swap_t, head);
if (vbl_swap->drw_id == swap->drawable &&
- vbl_swap->plane == plane &&
+ vbl_swap->pipe == pipe &&
vbl_swap->sequence == swap->sequence) {
- vbl_swap->flip = (swap->seqtype & _DRM_VBLANK_FLIP);
spin_unlock_irqrestore(&dev_priv->swaps_lock, irqflags);
DRM_DEBUG("Already scheduled\n");
return 0;
@@ -830,19 +567,9 @@
DRM_DEBUG("\n");
- ret = drm_vblank_get(dev, pipe);
- if (ret) {
- drm_free(vbl_swap, sizeof(*vbl_swap), DRM_MEM_DRIVER);
- return ret;
- }
-
vbl_swap->drw_id = swap->drawable;
- vbl_swap->plane = plane;
+ vbl_swap->pipe = pipe;
vbl_swap->sequence = swap->sequence;
- vbl_swap->flip = (swap->seqtype & _DRM_VBLANK_FLIP);
-
- if (vbl_swap->flip)
- swap->sequence++;
spin_lock_irqsave(&dev_priv->swaps_lock, irqflags);
@@ -860,57 +587,37 @@
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
- I915_WRITE16(I915REG_HWSTAM, 0xeffe);
+ I915_WRITE16(I915REG_HWSTAM, 0xfffe);
I915_WRITE16(I915REG_INT_MASK_R, 0x0);
I915_WRITE16(I915REG_INT_ENABLE_R, 0x0);
}
-int i915_driver_irq_postinstall(struct drm_device * dev)
+void i915_driver_irq_postinstall(struct drm_device * dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
- int ret, num_pipes = 2;
spin_lock_init(&dev_priv->swaps_lock);
INIT_LIST_HEAD(&dev_priv->vbl_swaps.head);
dev_priv->swaps_pending = 0;
- dev_priv->user_irq_refcount = 0;
- dev_priv->irq_enable_reg = 0;
-
- ret = drm_vblank_init(dev, num_pipes);
- if (ret)
- return ret;
-
- dev->max_vblank_count = 0xffffff; /* only 24 bits of frame count */
-
+ if (!dev_priv->vblank_pipe)
+ dev_priv->vblank_pipe = DRM_I915_VBLANK_PIPE_A;
i915_enable_interrupt(dev);
DRM_INIT_WAITQUEUE(&dev_priv->irq_queue);
-
- /*
- * Initialize the hardware status page IRQ location.
- */
-
- I915_WRITE(I915REG_INSTPM, (1 << 5) | (1 << 21));
- return 0;
}
void i915_driver_irq_uninstall(struct drm_device * dev)
{
drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private;
- u32 temp;
+ u16 temp;
if (!dev_priv)
return;
- dev_priv->irq_enabled = 0;
- I915_WRITE(I915REG_HWSTAM, 0xffffffff);
- I915_WRITE(I915REG_INT_MASK_R, 0xffffffff);
- I915_WRITE(I915REG_INT_ENABLE_R, 0x0);
+ I915_WRITE16(I915REG_HWSTAM, 0xffff);
+ I915_WRITE16(I915REG_INT_MASK_R, 0xffff);
+ I915_WRITE16(I915REG_INT_ENABLE_R, 0x0);
- temp = I915_READ(I915REG_PIPEASTAT);
- I915_WRITE(I915REG_PIPEASTAT, temp);
- temp = I915_READ(I915REG_PIPEBSTAT);
- I915_WRITE(I915REG_PIPEBSTAT, temp);
- temp = I915_READ(I915REG_INT_IDENTITY_R);
- I915_WRITE(I915REG_INT_IDENTITY_R, temp);
+ temp = I915_READ16(I915REG_INT_IDENTITY_R);
+ I915_WRITE16(I915REG_INT_IDENTITY_R, temp);
}
diff --git a/drivers/char/drm/mga_drv.c b/drivers/char/drm/mga_drv.c
index 6b37909..5572939 100644
--- a/drivers/char/drm/mga_drv.c
+++ b/drivers/char/drm/mga_drv.c
@@ -45,16 +45,15 @@
static struct drm_driver driver = {
.driver_features =
DRIVER_USE_AGP | DRIVER_USE_MTRR | DRIVER_PCI_DMA |
- DRIVER_HAVE_DMA | DRIVER_HAVE_IRQ | DRIVER_IRQ_SHARED,
+ DRIVER_HAVE_DMA | DRIVER_HAVE_IRQ | DRIVER_IRQ_SHARED |
+ DRIVER_IRQ_VBL,
.dev_priv_size = sizeof(drm_mga_buf_priv_t),
.load = mga_driver_load,
.unload = mga_driver_unload,
.lastclose = mga_driver_lastclose,
.dma_quiescent = mga_driver_dma_quiescent,
.device_is_agp = mga_driver_device_is_agp,
- .get_vblank_counter = mga_get_vblank_counter,
- .enable_vblank = mga_enable_vblank,
- .disable_vblank = mga_disable_vblank,
+ .vblank_wait = mga_driver_vblank_wait,
.irq_preinstall = mga_driver_irq_preinstall,
.irq_postinstall = mga_driver_irq_postinstall,
.irq_uninstall = mga_driver_irq_uninstall,
diff --git a/drivers/char/drm/mga_drv.h b/drivers/char/drm/mga_drv.h
index 8f7291f..f6ebd24 100644
--- a/drivers/char/drm/mga_drv.h
+++ b/drivers/char/drm/mga_drv.h
@@ -120,7 +120,6 @@
u32 clear_cmd;
u32 maccess;
- atomic_t vbl_received; /**< Number of vblanks received. */
wait_queue_head_t fence_queue;
atomic_t last_fence_retired;
u32 next_fence_to_post;
@@ -182,14 +181,11 @@
extern int mga_warp_init(drm_mga_private_t * dev_priv);
/* mga_irq.c */
-extern int mga_enable_vblank(struct drm_device *dev, int crtc);
-extern void mga_disable_vblank(struct drm_device *dev, int crtc);
-extern u32 mga_get_vblank_counter(struct drm_device *dev, int crtc);
extern int mga_driver_fence_wait(struct drm_device * dev, unsigned int *sequence);
extern int mga_driver_vblank_wait(struct drm_device * dev, unsigned int *sequence);
extern irqreturn_t mga_driver_irq_handler(DRM_IRQ_ARGS);
extern void mga_driver_irq_preinstall(struct drm_device * dev);
-extern int mga_driver_irq_postinstall(struct drm_device * dev);
+extern void mga_driver_irq_postinstall(struct drm_device * dev);
extern void mga_driver_irq_uninstall(struct drm_device * dev);
extern long mga_compat_ioctl(struct file *filp, unsigned int cmd,
unsigned long arg);
diff --git a/drivers/char/drm/mga_irq.c b/drivers/char/drm/mga_irq.c
index 06852fb..9302cb8 100644
--- a/drivers/char/drm/mga_irq.c
+++ b/drivers/char/drm/mga_irq.c
@@ -35,20 +35,6 @@
#include "mga_drm.h"
#include "mga_drv.h"
-u32 mga_get_vblank_counter(struct drm_device *dev, int crtc)
-{
- const drm_mga_private_t *const dev_priv =
- (drm_mga_private_t *) dev->dev_private;
-
- if (crtc != 0) {
- return 0;
- }
-
-
- return atomic_read(&dev_priv->vbl_received);
-}
-
-
irqreturn_t mga_driver_irq_handler(DRM_IRQ_ARGS)
{
struct drm_device *dev = (struct drm_device *) arg;
@@ -61,8 +47,9 @@
/* VBLANK interrupt */
if (status & MGA_VLINEPEN) {
MGA_WRITE(MGA_ICLEAR, MGA_VLINEICLR);
- atomic_inc(&dev_priv->vbl_received);
- drm_handle_vblank(dev, 0);
+ atomic_inc(&dev->vbl_received);
+ DRM_WAKEUP(&dev->vbl_queue);
+ drm_vbl_send_signals(dev);
handled = 1;
}
@@ -91,34 +78,22 @@
return IRQ_NONE;
}
-int mga_enable_vblank(struct drm_device *dev, int crtc)
+int mga_driver_vblank_wait(struct drm_device * dev, unsigned int *sequence)
{
- drm_mga_private_t *dev_priv = (drm_mga_private_t *) dev->dev_private;
+ unsigned int cur_vblank;
+ int ret = 0;
- if (crtc != 0) {
- DRM_ERROR("tried to enable vblank on non-existent crtc %d\n",
- crtc);
- return 0;
- }
-
- MGA_WRITE(MGA_IEN, MGA_VLINEIEN | MGA_SOFTRAPEN);
- return 0;
-}
-
-
-void mga_disable_vblank(struct drm_device *dev, int crtc)
-{
- if (crtc != 0) {
- DRM_ERROR("tried to disable vblank on non-existent crtc %d\n",
- crtc);
- }
-
- /* Do *NOT* disable the vertical refresh interrupt. MGA doesn't have
- * a nice hardware counter that tracks the number of refreshes when
- * the interrupt is disabled, and the kernel doesn't know the refresh
- * rate to calculate an estimate.
+ /* Assume that the user has missed the current sequence number
+ * by about a day rather than she wants to wait for years
+ * using vertical blanks...
*/
- /* MGA_WRITE(MGA_IEN, MGA_VLINEIEN | MGA_SOFTRAPEN); */
+ DRM_WAIT_ON(ret, dev->vbl_queue, 3 * DRM_HZ,
+ (((cur_vblank = atomic_read(&dev->vbl_received))
+ - *sequence) <= (1 << 23)));
+
+ *sequence = cur_vblank;
+
+ return ret;
}
int mga_driver_fence_wait(struct drm_device * dev, unsigned int *sequence)
@@ -150,22 +125,14 @@
MGA_WRITE(MGA_ICLEAR, ~0);
}
-int mga_driver_irq_postinstall(struct drm_device * dev)
+void mga_driver_irq_postinstall(struct drm_device * dev)
{
drm_mga_private_t *dev_priv = (drm_mga_private_t *) dev->dev_private;
- int ret;
-
- ret = drm_vblank_init(dev, 1);
- if (ret)
- return ret;
DRM_INIT_WAITQUEUE(&dev_priv->fence_queue);
- /* Turn on soft trap interrupt. Vertical blank interrupts are enabled
- * in mga_enable_vblank.
- */
- MGA_WRITE(MGA_IEN, MGA_SOFTRAPEN);
- return 0;
+ /* Turn on vertical blank interrupt and soft trap interrupt. */
+ MGA_WRITE(MGA_IEN, MGA_VLINEIEN | MGA_SOFTRAPEN);
}
void mga_driver_irq_uninstall(struct drm_device * dev)
diff --git a/drivers/char/drm/r128_drv.c b/drivers/char/drm/r128_drv.c
index 2888aa0..6108e75 100644
--- a/drivers/char/drm/r128_drv.c
+++ b/drivers/char/drm/r128_drv.c
@@ -43,13 +43,12 @@
static struct drm_driver driver = {
.driver_features =
DRIVER_USE_AGP | DRIVER_USE_MTRR | DRIVER_PCI_DMA | DRIVER_SG |
- DRIVER_HAVE_DMA | DRIVER_HAVE_IRQ | DRIVER_IRQ_SHARED,
+ DRIVER_HAVE_DMA | DRIVER_HAVE_IRQ | DRIVER_IRQ_SHARED |
+ DRIVER_IRQ_VBL,
.dev_priv_size = sizeof(drm_r128_buf_priv_t),
.preclose = r128_driver_preclose,
.lastclose = r128_driver_lastclose,
- .get_vblank_counter = r128_get_vblank_counter,
- .enable_vblank = r128_enable_vblank,
- .disable_vblank = r128_disable_vblank,
+ .vblank_wait = r128_driver_vblank_wait,
.irq_preinstall = r128_driver_irq_preinstall,
.irq_postinstall = r128_driver_irq_postinstall,
.irq_uninstall = r128_driver_irq_uninstall,
diff --git a/drivers/char/drm/r128_drv.h b/drivers/char/drm/r128_drv.h
index 80af9e0..011105e 100644
--- a/drivers/char/drm/r128_drv.h
+++ b/drivers/char/drm/r128_drv.h
@@ -97,8 +97,6 @@
u32 crtc_offset;
u32 crtc_offset_cntl;
- atomic_t vbl_received;
-
u32 color_fmt;
unsigned int front_offset;
unsigned int front_pitch;
@@ -151,12 +149,11 @@
extern int r128_do_cce_idle(drm_r128_private_t * dev_priv);
extern int r128_do_cleanup_cce(struct drm_device * dev);
-extern int r128_enable_vblank(struct drm_device *dev, int crtc);
-extern void r128_disable_vblank(struct drm_device *dev, int crtc);
-extern u32 r128_get_vblank_counter(struct drm_device *dev, int crtc);
+extern int r128_driver_vblank_wait(struct drm_device * dev, unsigned int *sequence);
+
extern irqreturn_t r128_driver_irq_handler(DRM_IRQ_ARGS);
extern void r128_driver_irq_preinstall(struct drm_device * dev);
-extern int r128_driver_irq_postinstall(struct drm_device * dev);
+extern void r128_driver_irq_postinstall(struct drm_device * dev);
extern void r128_driver_irq_uninstall(struct drm_device * dev);
extern void r128_driver_lastclose(struct drm_device * dev);
extern void r128_driver_preclose(struct drm_device * dev,
diff --git a/drivers/char/drm/r128_irq.c b/drivers/char/drm/r128_irq.c
index 5b95bd8..c76fdca 100644
--- a/drivers/char/drm/r128_irq.c
+++ b/drivers/char/drm/r128_irq.c
@@ -35,16 +35,6 @@
#include "r128_drm.h"
#include "r128_drv.h"
-u32 r128_get_vblank_counter(struct drm_device *dev, int crtc)
-{
- const drm_r128_private_t *dev_priv = dev->dev_private;
-
- if (crtc != 0)
- return 0;
-
- return atomic_read(&dev_priv->vbl_received);
-}
-
irqreturn_t r128_driver_irq_handler(DRM_IRQ_ARGS)
{
struct drm_device *dev = (struct drm_device *) arg;
@@ -56,38 +46,30 @@
/* VBLANK interrupt */
if (status & R128_CRTC_VBLANK_INT) {
R128_WRITE(R128_GEN_INT_STATUS, R128_CRTC_VBLANK_INT_AK);
- atomic_inc(&dev_priv->vbl_received);
- drm_handle_vblank(dev, 0);
+ atomic_inc(&dev->vbl_received);
+ DRM_WAKEUP(&dev->vbl_queue);
+ drm_vbl_send_signals(dev);
return IRQ_HANDLED;
}
return IRQ_NONE;
}
-int r128_enable_vblank(struct drm_device *dev, int crtc)
+int r128_driver_vblank_wait(struct drm_device * dev, unsigned int *sequence)
{
- drm_r128_private_t *dev_priv = dev->dev_private;
+ unsigned int cur_vblank;
+ int ret = 0;
- if (crtc != 0) {
- DRM_ERROR("%s: bad crtc %d\n", __FUNCTION__, crtc);
- return -EINVAL;
- }
-
- R128_WRITE(R128_GEN_INT_CNTL, R128_CRTC_VBLANK_INT_EN);
- return 0;
-}
-
-void r128_disable_vblank(struct drm_device *dev, int crtc)
-{
- if (crtc != 0)
- DRM_ERROR("%s: bad crtc %d\n", __FUNCTION__, crtc);
-
- /*
- * FIXME: implement proper interrupt disable by using the vblank
- * counter register (if available)
- *
- * R128_WRITE(R128_GEN_INT_CNTL,
- * R128_READ(R128_GEN_INT_CNTL) & ~R128_CRTC_VBLANK_INT_EN);
+ /* Assume that the user has missed the current sequence number
+ * by about a day rather than she wants to wait for years
+ * using vertical blanks...
*/
+ DRM_WAIT_ON(ret, dev->vbl_queue, 3 * DRM_HZ,
+ (((cur_vblank = atomic_read(&dev->vbl_received))
+ - *sequence) <= (1 << 23)));
+
+ *sequence = cur_vblank;
+
+ return ret;
}
void r128_driver_irq_preinstall(struct drm_device * dev)
@@ -100,9 +82,12 @@
R128_WRITE(R128_GEN_INT_STATUS, R128_CRTC_VBLANK_INT_AK);
}
-int r128_driver_irq_postinstall(struct drm_device * dev)
+void r128_driver_irq_postinstall(struct drm_device * dev)
{
- return drm_vblank_init(dev, 1);
+ drm_r128_private_t *dev_priv = (drm_r128_private_t *) dev->dev_private;
+
+ /* Turn on VBL interrupt */
+ R128_WRITE(R128_GEN_INT_CNTL, R128_CRTC_VBLANK_INT_EN);
}
void r128_driver_irq_uninstall(struct drm_device * dev)
diff --git a/drivers/char/drm/radeon_drv.c b/drivers/char/drm/radeon_drv.c
index a261031..349ac3d 100644
--- a/drivers/char/drm/radeon_drv.c
+++ b/drivers/char/drm/radeon_drv.c
@@ -59,7 +59,8 @@
static struct drm_driver driver = {
.driver_features =
DRIVER_USE_AGP | DRIVER_USE_MTRR | DRIVER_PCI_DMA | DRIVER_SG |
- DRIVER_HAVE_IRQ | DRIVER_HAVE_DMA | DRIVER_IRQ_SHARED,
+ DRIVER_HAVE_IRQ | DRIVER_HAVE_DMA | DRIVER_IRQ_SHARED |
+ DRIVER_IRQ_VBL | DRIVER_IRQ_VBL2,
.dev_priv_size = sizeof(drm_radeon_buf_priv_t),
.load = radeon_driver_load,
.firstopen = radeon_driver_firstopen,
@@ -68,9 +69,8 @@
.postclose = radeon_driver_postclose,
.lastclose = radeon_driver_lastclose,
.unload = radeon_driver_unload,
- .get_vblank_counter = radeon_get_vblank_counter,
- .enable_vblank = radeon_enable_vblank,
- .disable_vblank = radeon_disable_vblank,
+ .vblank_wait = radeon_driver_vblank_wait,
+ .vblank_wait2 = radeon_driver_vblank_wait2,
.dri_library_name = dri_library_name,
.irq_preinstall = radeon_driver_irq_preinstall,
.irq_postinstall = radeon_driver_irq_postinstall,
diff --git a/drivers/char/drm/radeon_drv.h b/drivers/char/drm/radeon_drv.h
index b791420..173ae62 100644
--- a/drivers/char/drm/radeon_drv.h
+++ b/drivers/char/drm/radeon_drv.h
@@ -304,9 +304,6 @@
u32 scratch_ages[5];
- unsigned int crtc_last_cnt;
- unsigned int crtc2_last_cnt;
-
/* starting from here on, data is preserved accross an open */
uint32_t flags; /* see radeon_chip_flags */
unsigned long fb_aper_offset;
@@ -377,13 +374,13 @@
extern int radeon_irq_wait(struct drm_device *dev, void *data, struct drm_file *file_priv);
extern void radeon_do_release(struct drm_device * dev);
-extern u32 radeon_get_vblank_counter(struct drm_device *dev, int crtc);
-extern int radeon_enable_vblank(struct drm_device *dev, int crtc);
-extern void radeon_disable_vblank(struct drm_device *dev, int crtc);
-extern void radeon_do_release(struct drm_device * dev);
+extern int radeon_driver_vblank_wait(struct drm_device * dev,
+ unsigned int *sequence);
+extern int radeon_driver_vblank_wait2(struct drm_device * dev,
+ unsigned int *sequence);
extern irqreturn_t radeon_driver_irq_handler(DRM_IRQ_ARGS);
extern void radeon_driver_irq_preinstall(struct drm_device * dev);
-extern int radeon_driver_irq_postinstall(struct drm_device * dev);
+extern void radeon_driver_irq_postinstall(struct drm_device * dev);
extern void radeon_driver_irq_uninstall(struct drm_device * dev);
extern int radeon_vblank_crtc_get(struct drm_device *dev);
extern int radeon_vblank_crtc_set(struct drm_device *dev, int64_t value);
@@ -561,12 +558,6 @@
? DRM_READ32( dev_priv->ring_rptr, RADEON_SCRATCHOFF(x) ) \
: RADEON_READ( RADEON_SCRATCH_REG0 + 4*(x) ) )
-#define RADEON_CRTC_CRNT_FRAME 0x0214
-#define RADEON_CRTC2_CRNT_FRAME 0x0314
-
-#define RADEON_CRTC_STATUS 0x005c
-#define RADEON_CRTC2_STATUS 0x03fc
-
#define RADEON_GEN_INT_CNTL 0x0040
# define RADEON_CRTC_VBLANK_MASK (1 << 0)
# define RADEON_CRTC2_VBLANK_MASK (1 << 9)
diff --git a/drivers/char/drm/radeon_irq.c b/drivers/char/drm/radeon_irq.c
index 507d6b7..009af38 100644
--- a/drivers/char/drm/radeon_irq.c
+++ b/drivers/char/drm/radeon_irq.c
@@ -35,61 +35,12 @@
#include "radeon_drm.h"
#include "radeon_drv.h"
-static void radeon_irq_set_state(struct drm_device *dev, u32 mask, int state)
+static __inline__ u32 radeon_acknowledge_irqs(drm_radeon_private_t * dev_priv,
+ u32 mask)
{
- drm_radeon_private_t *dev_priv = dev->dev_private;
-
- if (state)
- dev_priv->irq_enable_reg |= mask;
- else
- dev_priv->irq_enable_reg &= ~mask;
-
- RADEON_WRITE(RADEON_GEN_INT_CNTL, dev_priv->irq_enable_reg);
-}
-
-int radeon_enable_vblank(struct drm_device *dev, int crtc)
-{
- switch (crtc) {
- case 0:
- radeon_irq_set_state(dev, RADEON_CRTC_VBLANK_MASK, 1);
- break;
- case 1:
- radeon_irq_set_state(dev, RADEON_CRTC2_VBLANK_MASK, 1);
- break;
- default:
- DRM_ERROR("tried to enable vblank on non-existent crtc %d\n",
- crtc);
- return EINVAL;
- }
-
- return 0;
-}
-
-void radeon_disable_vblank(struct drm_device *dev, int crtc)
-{
- switch (crtc) {
- case 0:
- radeon_irq_set_state(dev, RADEON_CRTC_VBLANK_MASK, 0);
- break;
- case 1:
- radeon_irq_set_state(dev, RADEON_CRTC2_VBLANK_MASK, 0);
- break;
- default:
- DRM_ERROR("tried to enable vblank on non-existent crtc %d\n",
- crtc);
- break;
- }
-}
-
-static __inline__ u32 radeon_acknowledge_irqs(drm_radeon_private_t * dev_priv)
-{
- u32 irqs = RADEON_READ(RADEON_GEN_INT_STATUS) &
- (RADEON_SW_INT_TEST | RADEON_CRTC_VBLANK_STAT |
- RADEON_CRTC2_VBLANK_STAT);
-
+ u32 irqs = RADEON_READ(RADEON_GEN_INT_STATUS) & mask;
if (irqs)
RADEON_WRITE(RADEON_GEN_INT_STATUS, irqs);
-
return irqs;
}
@@ -121,21 +72,39 @@
/* Only consider the bits we're interested in - others could be used
* outside the DRM
*/
- stat = radeon_acknowledge_irqs(dev_priv);
+ stat = radeon_acknowledge_irqs(dev_priv, (RADEON_SW_INT_TEST_ACK |
+ RADEON_CRTC_VBLANK_STAT |
+ RADEON_CRTC2_VBLANK_STAT));
if (!stat)
return IRQ_NONE;
stat &= dev_priv->irq_enable_reg;
/* SW interrupt */
- if (stat & RADEON_SW_INT_TEST)
+ if (stat & RADEON_SW_INT_TEST) {
DRM_WAKEUP(&dev_priv->swi_queue);
+ }
/* VBLANK interrupt */
- if (stat & RADEON_CRTC_VBLANK_STAT)
- drm_handle_vblank(dev, 0);
- if (stat & RADEON_CRTC2_VBLANK_STAT)
- drm_handle_vblank(dev, 1);
+ if (stat & (RADEON_CRTC_VBLANK_STAT|RADEON_CRTC2_VBLANK_STAT)) {
+ int vblank_crtc = dev_priv->vblank_crtc;
+
+ if ((vblank_crtc &
+ (DRM_RADEON_VBLANK_CRTC1 | DRM_RADEON_VBLANK_CRTC2)) ==
+ (DRM_RADEON_VBLANK_CRTC1 | DRM_RADEON_VBLANK_CRTC2)) {
+ if (stat & RADEON_CRTC_VBLANK_STAT)
+ atomic_inc(&dev->vbl_received);
+ if (stat & RADEON_CRTC2_VBLANK_STAT)
+ atomic_inc(&dev->vbl_received2);
+ } else if (((stat & RADEON_CRTC_VBLANK_STAT) &&
+ (vblank_crtc & DRM_RADEON_VBLANK_CRTC1)) ||
+ ((stat & RADEON_CRTC2_VBLANK_STAT) &&
+ (vblank_crtc & DRM_RADEON_VBLANK_CRTC2)))
+ atomic_inc(&dev->vbl_received);
+
+ DRM_WAKEUP(&dev->vbl_queue);
+ drm_vbl_send_signals(dev);
+ }
return IRQ_HANDLED;
}
@@ -175,27 +144,54 @@
return ret;
}
-u32 radeon_get_vblank_counter(struct drm_device *dev, int crtc)
+static int radeon_driver_vblank_do_wait(struct drm_device * dev,
+ unsigned int *sequence, int crtc)
{
- drm_radeon_private_t *dev_priv = dev->dev_private;
- u32 crtc_cnt_reg, crtc_status_reg;
-
+ drm_radeon_private_t *dev_priv =
+ (drm_radeon_private_t *) dev->dev_private;
+ unsigned int cur_vblank;
+ int ret = 0;
+ int ack = 0;
+ atomic_t *counter;
if (!dev_priv) {
DRM_ERROR("called with no initialization\n");
return -EINVAL;
}
- if (crtc == 0) {
- crtc_cnt_reg = RADEON_CRTC_CRNT_FRAME;
- crtc_status_reg = RADEON_CRTC_STATUS;
- } else if (crtc == 1) {
- crtc_cnt_reg = RADEON_CRTC2_CRNT_FRAME;
- crtc_status_reg = RADEON_CRTC2_STATUS;
- } else {
+ if (crtc == DRM_RADEON_VBLANK_CRTC1) {
+ counter = &dev->vbl_received;
+ ack |= RADEON_CRTC_VBLANK_STAT;
+ } else if (crtc == DRM_RADEON_VBLANK_CRTC2) {
+ counter = &dev->vbl_received2;
+ ack |= RADEON_CRTC2_VBLANK_STAT;
+ } else
return -EINVAL;
- }
- return RADEON_READ(crtc_cnt_reg) + (RADEON_READ(crtc_status_reg) & 1);
+ radeon_acknowledge_irqs(dev_priv, ack);
+
+ dev_priv->stats.boxes |= RADEON_BOX_WAIT_IDLE;
+
+ /* Assume that the user has missed the current sequence number
+ * by about a day rather than she wants to wait for years
+ * using vertical blanks...
+ */
+ DRM_WAIT_ON(ret, dev->vbl_queue, 3 * DRM_HZ,
+ (((cur_vblank = atomic_read(counter))
+ - *sequence) <= (1 << 23)));
+
+ *sequence = cur_vblank;
+
+ return ret;
+}
+
+int radeon_driver_vblank_wait(struct drm_device *dev, unsigned int *sequence)
+{
+ return radeon_driver_vblank_do_wait(dev, sequence, DRM_RADEON_VBLANK_CRTC1);
+}
+
+int radeon_driver_vblank_wait2(struct drm_device *dev, unsigned int *sequence)
+{
+ return radeon_driver_vblank_do_wait(dev, sequence, DRM_RADEON_VBLANK_CRTC2);
}
/* Needs the lock as it touches the ring.
@@ -238,6 +234,21 @@
return radeon_wait_irq(dev, irqwait->irq_seq);
}
+static void radeon_enable_interrupt(struct drm_device *dev)
+{
+ drm_radeon_private_t *dev_priv = (drm_radeon_private_t *) dev->dev_private;
+
+ dev_priv->irq_enable_reg = RADEON_SW_INT_ENABLE;
+ if (dev_priv->vblank_crtc & DRM_RADEON_VBLANK_CRTC1)
+ dev_priv->irq_enable_reg |= RADEON_CRTC_VBLANK_MASK;
+
+ if (dev_priv->vblank_crtc & DRM_RADEON_VBLANK_CRTC2)
+ dev_priv->irq_enable_reg |= RADEON_CRTC2_VBLANK_MASK;
+
+ RADEON_WRITE(RADEON_GEN_INT_CNTL, dev_priv->irq_enable_reg);
+ dev_priv->irq_enabled = 1;
+}
+
/* drm_dma.h hooks
*/
void radeon_driver_irq_preinstall(struct drm_device * dev)
@@ -249,27 +260,20 @@
RADEON_WRITE(RADEON_GEN_INT_CNTL, 0);
/* Clear bits if they're already high */
- radeon_acknowledge_irqs(dev_priv);
+ radeon_acknowledge_irqs(dev_priv, (RADEON_SW_INT_TEST_ACK |
+ RADEON_CRTC_VBLANK_STAT |
+ RADEON_CRTC2_VBLANK_STAT));
}
-int radeon_driver_irq_postinstall(struct drm_device * dev)
+void radeon_driver_irq_postinstall(struct drm_device * dev)
{
drm_radeon_private_t *dev_priv =
(drm_radeon_private_t *) dev->dev_private;
- int ret;
atomic_set(&dev_priv->swi_emitted, 0);
DRM_INIT_WAITQUEUE(&dev_priv->swi_queue);
- ret = drm_vblank_init(dev, 2);
- if (ret)
- return ret;
-
- dev->max_vblank_count = 0x001fffff;
-
- radeon_irq_set_state(dev, RADEON_SW_INT_ENABLE, 1);
-
- return 0;
+ radeon_enable_interrupt(dev);
}
void radeon_driver_irq_uninstall(struct drm_device * dev)
@@ -311,5 +315,6 @@
return -EINVAL;
}
dev_priv->vblank_crtc = (unsigned int)value;
+ radeon_enable_interrupt(dev);
return 0;
}
diff --git a/drivers/char/drm/via_drv.c b/drivers/char/drm/via_drv.c
index 37870a4..80c01cd 100644
--- a/drivers/char/drm/via_drv.c
+++ b/drivers/char/drm/via_drv.c
@@ -40,13 +40,11 @@
static struct drm_driver driver = {
.driver_features =
DRIVER_USE_AGP | DRIVER_USE_MTRR | DRIVER_HAVE_IRQ |
- DRIVER_IRQ_SHARED,
+ DRIVER_IRQ_SHARED | DRIVER_IRQ_VBL,
.load = via_driver_load,
.unload = via_driver_unload,
.context_dtor = via_final_context,
- .get_vblank_counter = via_get_vblank_counter,
- .enable_vblank = via_enable_vblank,
- .disable_vblank = via_disable_vblank,
+ .vblank_wait = via_driver_vblank_wait,
.irq_preinstall = via_driver_irq_preinstall,
.irq_postinstall = via_driver_irq_postinstall,
.irq_uninstall = via_driver_irq_uninstall,
diff --git a/drivers/char/drm/via_drv.h b/drivers/char/drm/via_drv.h
index fe67030..2daae81 100644
--- a/drivers/char/drm/via_drv.h
+++ b/drivers/char/drm/via_drv.h
@@ -75,7 +75,6 @@
struct timeval last_vblank;
int last_vblank_valid;
unsigned usec_per_vblank;
- atomic_t vbl_received;
drm_via_state_t hc_state;
char pci_buf[VIA_PCI_BUF_SIZE];
const uint32_t *fire_offsets[VIA_FIRE_BUF_SIZE];
@@ -131,13 +130,11 @@
extern int via_final_context(struct drm_device * dev, int context);
extern int via_do_cleanup_map(struct drm_device * dev);
-extern u32 via_get_vblank_counter(struct drm_device *dev, int crtc);
-extern int via_enable_vblank(struct drm_device *dev, int crtc);
-extern void via_disable_vblank(struct drm_device *dev, int crtc);
+extern int via_driver_vblank_wait(struct drm_device * dev, unsigned int *sequence);
extern irqreturn_t via_driver_irq_handler(DRM_IRQ_ARGS);
extern void via_driver_irq_preinstall(struct drm_device * dev);
-extern int via_driver_irq_postinstall(struct drm_device * dev);
+extern void via_driver_irq_postinstall(struct drm_device * dev);
extern void via_driver_irq_uninstall(struct drm_device * dev);
extern int via_dma_cleanup(struct drm_device * dev);
diff --git a/drivers/char/drm/via_irq.c b/drivers/char/drm/via_irq.c
index f1ab6fc..c6bb978 100644
--- a/drivers/char/drm/via_irq.c
+++ b/drivers/char/drm/via_irq.c
@@ -92,17 +92,8 @@
static unsigned time_diff(struct timeval *now, struct timeval *then)
{
return (now->tv_usec >= then->tv_usec) ?
- now->tv_usec - then->tv_usec :
- 1000000 - (then->tv_usec - now->tv_usec);
-}
-
-u32 via_get_vblank_counter(struct drm_device *dev, int crtc)
-{
- drm_via_private_t *dev_priv = dev->dev_private;
- if (crtc != 0)
- return 0;
-
- return atomic_read(&dev_priv->vbl_received);
+ now->tv_usec - then->tv_usec :
+ 1000000 - (then->tv_usec - now->tv_usec);
}
irqreturn_t via_driver_irq_handler(DRM_IRQ_ARGS)
@@ -117,8 +108,8 @@
status = VIA_READ(VIA_REG_INTERRUPT);
if (status & VIA_IRQ_VBLANK_PENDING) {
- atomic_inc(&dev_priv->vbl_received);
- if (!(atomic_read(&dev_priv->vbl_received) & 0x0F)) {
+ atomic_inc(&dev->vbl_received);
+ if (!(atomic_read(&dev->vbl_received) & 0x0F)) {
do_gettimeofday(&cur_vblank);
if (dev_priv->last_vblank_valid) {
dev_priv->usec_per_vblank =
@@ -128,11 +119,12 @@
dev_priv->last_vblank = cur_vblank;
dev_priv->last_vblank_valid = 1;
}
- if (!(atomic_read(&dev_priv->vbl_received) & 0xFF)) {
+ if (!(atomic_read(&dev->vbl_received) & 0xFF)) {
DRM_DEBUG("US per vblank is: %u\n",
dev_priv->usec_per_vblank);
}
- drm_handle_vblank(dev, 0);
+ DRM_WAKEUP(&dev->vbl_queue);
+ drm_vbl_send_signals(dev);
handled = 1;
}
@@ -171,34 +163,31 @@
}
}
-int via_enable_vblank(struct drm_device *dev, int crtc)
+int via_driver_vblank_wait(struct drm_device * dev, unsigned int *sequence)
{
- drm_via_private_t *dev_priv = dev->dev_private;
- u32 status;
+ drm_via_private_t *dev_priv = (drm_via_private_t *) dev->dev_private;
+ unsigned int cur_vblank;
+ int ret = 0;
- if (crtc != 0) {
- DRM_ERROR("%s: bad crtc %d\n", __FUNCTION__, crtc);
+ DRM_DEBUG("\n");
+ if (!dev_priv) {
+ DRM_ERROR("called with no initialization\n");
return -EINVAL;
}
- status = VIA_READ(VIA_REG_INTERRUPT);
- VIA_WRITE(VIA_REG_INTERRUPT, status & VIA_IRQ_VBLANK_ENABLE);
+ viadrv_acknowledge_irqs(dev_priv);
- VIA_WRITE8(0x83d4, 0x11);
- VIA_WRITE8(0x83d5, VIA_READ8(0x83d5) | 0x30);
+ /* Assume that the user has missed the current sequence number
+ * by about a day rather than she wants to wait for years
+ * using vertical blanks...
+ */
- return 0;
-}
+ DRM_WAIT_ON(ret, dev->vbl_queue, 3 * DRM_HZ,
+ (((cur_vblank = atomic_read(&dev->vbl_received)) -
+ *sequence) <= (1 << 23)));
-void via_disable_vblank(struct drm_device *dev, int crtc)
-{
- drm_via_private_t *dev_priv = dev->dev_private;
-
- VIA_WRITE8(0x83d4, 0x11);
- VIA_WRITE8(0x83d5, VIA_READ8(0x83d5) & ~0x30);
-
- if (crtc != 0)
- DRM_ERROR("%s: bad crtc %d\n", __FUNCTION__, crtc);
+ *sequence = cur_vblank;
+ return ret;
}
static int
@@ -303,25 +292,23 @@
}
}
-int via_driver_irq_postinstall(struct drm_device * dev)
+void via_driver_irq_postinstall(struct drm_device * dev)
{
drm_via_private_t *dev_priv = (drm_via_private_t *) dev->dev_private;
u32 status;
- DRM_DEBUG("via_driver_irq_postinstall\n");
- if (!dev_priv)
- return -EINVAL;
+ DRM_DEBUG("\n");
+ if (dev_priv) {
+ status = VIA_READ(VIA_REG_INTERRUPT);
+ VIA_WRITE(VIA_REG_INTERRUPT, status | VIA_IRQ_GLOBAL
+ | dev_priv->irq_enable_mask);
- drm_vblank_init(dev, 1);
- status = VIA_READ(VIA_REG_INTERRUPT);
- VIA_WRITE(VIA_REG_INTERRUPT, status | VIA_IRQ_GLOBAL
- | dev_priv->irq_enable_mask);
+ /* Some magic, oh for some data sheets ! */
- /* Some magic, oh for some data sheets ! */
- VIA_WRITE8(0x83d4, 0x11);
- VIA_WRITE8(0x83d5, VIA_READ8(0x83d5) | 0x30);
+ VIA_WRITE8(0x83d4, 0x11);
+ VIA_WRITE8(0x83d5, VIA_READ8(0x83d5) | 0x30);
- return 0;
+ }
}
void via_driver_irq_uninstall(struct drm_device * dev)
diff --git a/drivers/char/generic_nvram.c b/drivers/char/generic_nvram.c
index 2398e86..a00869c 100644
--- a/drivers/char/generic_nvram.c
+++ b/drivers/char/generic_nvram.c
@@ -133,7 +133,7 @@
int __init nvram_init(void)
{
- printk(KERN_INFO "Macintosh non-volatile memory driver v%s\n",
+ printk(KERN_INFO "Generic non-volatile memory driver v%s\n",
NVRAM_VERSION);
return misc_register(&nvram_dev);
}
diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig
index 8d6c208..efd0b4d 100644
--- a/drivers/char/hw_random/Kconfig
+++ b/drivers/char/hw_random/Kconfig
@@ -112,3 +112,12 @@
If unsure, say Y.
+config HW_RANDOM_VIRTIO
+ tristate "VirtIO Random Number Generator support"
+ depends on HW_RANDOM && VIRTIO
+ ---help---
+ This driver provides kernel-side support for the virtual Random Number
+ Generator hardware.
+
+ To compile this driver as a module, choose M here: the
+ module will be called virtio-rng. If unsure, say N.
diff --git a/drivers/char/hw_random/Makefile b/drivers/char/hw_random/Makefile
index c8b7300..b4940dd 100644
--- a/drivers/char/hw_random/Makefile
+++ b/drivers/char/hw_random/Makefile
@@ -11,3 +11,4 @@
obj-$(CONFIG_HW_RANDOM_IXP4XX) += ixp4xx-rng.o
obj-$(CONFIG_HW_RANDOM_OMAP) += omap-rng.o
obj-$(CONFIG_HW_RANDOM_PASEMI) += pasemi-rng.o
+obj-$(CONFIG_HW_RANDOM_VIRTIO) += virtio-rng.o
diff --git a/drivers/char/hw_random/intel-rng.c b/drivers/char/hw_random/intel-rng.c
index 5cc651e..27fdc08 100644
--- a/drivers/char/hw_random/intel-rng.c
+++ b/drivers/char/hw_random/intel-rng.c
@@ -273,7 +273,7 @@
if (mfc != INTEL_FWH_MANUFACTURER_CODE ||
(dvc != INTEL_FWH_DEVICE_CODE_8M &&
dvc != INTEL_FWH_DEVICE_CODE_4M)) {
- printk(KERN_ERR PFX "FWH not detected\n");
+ printk(KERN_NOTICE PFX "FWH not detected\n");
return -ENODEV;
}
diff --git a/drivers/char/hw_random/virtio-rng.c b/drivers/char/hw_random/virtio-rng.c
new file mode 100644
index 0000000..d0e563e
--- /dev/null
+++ b/drivers/char/hw_random/virtio-rng.c
@@ -0,0 +1,155 @@
+/*
+ * Randomness driver for virtio
+ * Copyright (C) 2007, 2008 Rusty Russell IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+#include <linux/err.h>
+#include <linux/hw_random.h>
+#include <linux/scatterlist.h>
+#include <linux/spinlock.h>
+#include <linux/virtio.h>
+#include <linux/virtio_rng.h>
+
+/* The host will fill any buffer we give it with sweet, sweet randomness. We
+ * give it 64 bytes at a time, and the hwrng framework takes it 4 bytes at a
+ * time. */
+#define RANDOM_DATA_SIZE 64
+
+static struct virtqueue *vq;
+static u32 *random_data;
+static unsigned int data_left;
+static DECLARE_COMPLETION(have_data);
+
+static void random_recv_done(struct virtqueue *vq)
+{
+ int len;
+
+ /* We never get spurious callbacks. */
+ if (!vq->vq_ops->get_buf(vq, &len))
+ BUG();
+
+ data_left = len / sizeof(random_data[0]);
+ complete(&have_data);
+}
+
+static void register_buffer(void)
+{
+ struct scatterlist sg;
+
+ sg_init_one(&sg, random_data, RANDOM_DATA_SIZE);
+ /* There should always be room for one buffer. */
+ if (vq->vq_ops->add_buf(vq, &sg, 0, 1, random_data) != 0)
+ BUG();
+ vq->vq_ops->kick(vq);
+}
+
+/* At least we don't udelay() in a loop like some other drivers. */
+static int virtio_data_present(struct hwrng *rng, int wait)
+{
+ if (data_left)
+ return 1;
+
+ if (!wait)
+ return 0;
+
+ wait_for_completion(&have_data);
+ return 1;
+}
+
+/* virtio_data_present() must have succeeded before this is called. */
+static int virtio_data_read(struct hwrng *rng, u32 *data)
+{
+ BUG_ON(!data_left);
+
+ *data = random_data[--data_left];
+
+ if (!data_left) {
+ init_completion(&have_data);
+ register_buffer();
+ }
+ return sizeof(*data);
+}
+
+static struct hwrng virtio_hwrng = {
+ .name = "virtio",
+ .data_present = virtio_data_present,
+ .data_read = virtio_data_read,
+};
+
+static int virtrng_probe(struct virtio_device *vdev)
+{
+ int err;
+
+ /* We expect a single virtqueue. */
+ vq = vdev->config->find_vq(vdev, 0, random_recv_done);
+ if (IS_ERR(vq))
+ return PTR_ERR(vq);
+
+ err = hwrng_register(&virtio_hwrng);
+ if (err) {
+ vdev->config->del_vq(vq);
+ return err;
+ }
+
+ register_buffer();
+ return 0;
+}
+
+static void virtrng_remove(struct virtio_device *vdev)
+{
+ vdev->config->reset(vdev);
+ hwrng_unregister(&virtio_hwrng);
+ vdev->config->del_vq(vq);
+}
+
+static struct virtio_device_id id_table[] = {
+ { VIRTIO_ID_RNG, VIRTIO_DEV_ANY_ID },
+ { 0 },
+};
+
+static struct virtio_driver virtio_rng = {
+ .driver.name = KBUILD_MODNAME,
+ .driver.owner = THIS_MODULE,
+ .id_table = id_table,
+ .probe = virtrng_probe,
+ .remove = __devexit_p(virtrng_remove),
+};
+
+static int __init init(void)
+{
+ int err;
+
+ random_data = kmalloc(RANDOM_DATA_SIZE, GFP_KERNEL);
+ if (!random_data)
+ return -ENOMEM;
+
+ err = register_virtio_driver(&virtio_rng);
+ if (err)
+ kfree(random_data);
+ return err;
+}
+
+static void __exit fini(void)
+{
+ kfree(random_data);
+ unregister_virtio_driver(&virtio_rng);
+}
+module_init(init);
+module_exit(fini);
+
+MODULE_DEVICE_TABLE(virtio, id_table);
+MODULE_DESCRIPTION("Virtio random number driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/char/ip2/Makefile b/drivers/char/ip2/Makefile
index 6bfe254..939618f 100644
--- a/drivers/char/ip2/Makefile
+++ b/drivers/char/ip2/Makefile
@@ -2,7 +2,7 @@
# Makefile for the Computone IntelliPort Plus Driver
#
-obj-$(CONFIG_COMPUTONE) += ip2.o ip2main.o
+obj-$(CONFIG_COMPUTONE) += ip2.o
-ip2-objs := ip2base.o
+ip2-objs := ip2base.o ip2main.o
diff --git a/drivers/char/ip2/ip2main.c b/drivers/char/ip2/ip2main.c
index 70957ac..c12cf8f 100644
--- a/drivers/char/ip2/ip2main.c
+++ b/drivers/char/ip2/ip2main.c
@@ -346,27 +346,6 @@
}
/******************************************************************************/
-/* Function: init_module() */
-/* Parameters: None */
-/* Returns: Success (0) */
-/* */
-/* Description: */
-/* This is a required entry point for an installable module. It simply calls */
-/* the driver initialisation function and returns what it returns. */
-/******************************************************************************/
-#ifdef MODULE
-static int __init
-ip2_init_module(void)
-{
-#ifdef IP2DEBUG_INIT
- printk (KERN_DEBUG "Loading module ...\n" );
-#endif
- return 0;
-}
-module_init(ip2_init_module);
-#endif /* MODULE */
-
-/******************************************************************************/
/* Function: cleanup_module() */
/* Parameters: None */
/* Returns: Nothing */
@@ -779,8 +758,6 @@
return err;
}
-EXPORT_SYMBOL(ip2_loadmain);
-
/******************************************************************************/
/* Function: ip2_init_board() */
/* Parameters: Index of board in configuration structure */
diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index 5a54555..1926883 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -2352,10 +2352,16 @@
info->si_type = (enum si_type) match->data;
info->addr_source = "device-tree";
- info->io_setup = mem_setup;
info->irq_setup = std_irq_setup;
- info->io.addr_type = IPMI_MEM_ADDR_SPACE;
+ if (resource.flags & IORESOURCE_IO) {
+ info->io_setup = port_setup;
+ info->io.addr_type = IPMI_IO_ADDR_SPACE;
+ } else {
+ info->io_setup = mem_setup;
+ info->io.addr_type = IPMI_MEM_ADDR_SPACE;
+ }
+
info->io.addr_data = resource.start;
info->io.regsize = regsize ? *regsize : DEFAULT_REGSIZE;
diff --git a/drivers/char/keyboard.c b/drivers/char/keyboard.c
index 7f7e798..d9a0a53 100644
--- a/drivers/char/keyboard.c
+++ b/drivers/char/keyboard.c
@@ -677,12 +677,7 @@
static void k_self(struct vc_data *vc, unsigned char value, char up_flag)
{
- unsigned int uni;
- if (kbd->kbdmode == VC_UNICODE)
- uni = value;
- else
- uni = conv_8bit_to_uni(value);
- k_unicode(vc, uni, up_flag);
+ k_unicode(vc, conv_8bit_to_uni(value), up_flag);
}
static void k_dead2(struct vc_data *vc, unsigned char value, char up_flag)
diff --git a/drivers/char/n_tty.c b/drivers/char/n_tty.c
index 19105ec..8096389 100644
--- a/drivers/char/n_tty.c
+++ b/drivers/char/n_tty.c
@@ -282,16 +282,20 @@
if (O_ONLRET(tty))
tty->column = 0;
if (O_ONLCR(tty)) {
- if (space < 2)
+ if (space < 2) {
+ unlock_kernel();
return -1;
+ }
tty_put_char(tty, '\r');
tty->column = 0;
}
tty->canon_column = tty->column;
break;
case '\r':
- if (O_ONOCR(tty) && tty->column == 0)
+ if (O_ONOCR(tty) && tty->column == 0) {
+ unlock_kernel();
return 0;
+ }
if (O_OCRNL(tty)) {
c = '\n';
if (O_ONLRET(tty))
@@ -303,10 +307,13 @@
case '\t':
spaces = 8 - (tty->column & 7);
if (O_TABDLY(tty) == XTABS) {
- if (space < spaces)
+ if (space < spaces) {
+ unlock_kernel();
return -1;
+ }
tty->column += spaces;
tty->ops->write(tty, " ", spaces);
+ unlock_kernel();
return 0;
}
tty->column += spaces;
diff --git a/drivers/char/pcmcia/ipwireless/hardware.c b/drivers/char/pcmcia/ipwireless/hardware.c
index fa9d3c9..ba6340ae 100644
--- a/drivers/char/pcmcia/ipwireless/hardware.c
+++ b/drivers/char/pcmcia/ipwireless/hardware.c
@@ -251,10 +251,11 @@
int init_loops;
struct timer_list setup_timer;
+ /* Flag if hw is ready to send next packet */
int tx_ready;
- struct list_head tx_queue[NL_NUM_OF_PRIORITIES];
- /* True if any packets are queued for transmission */
+ /* Count of pending packets to be sent */
int tx_queued;
+ struct list_head tx_queue[NL_NUM_OF_PRIORITIES];
int rx_bytes_queued;
struct list_head rx_queue;
@@ -404,6 +405,8 @@
spin_lock_irqsave(&hw->spinlock, flags);
+ hw->tx_ready = 0;
+
if (hw->hw_version == HW_VERSION_1) {
outw((unsigned short) length, hw->base_port + IODWR);
@@ -492,6 +495,7 @@
spin_lock_irqsave(&hw->spinlock, flags);
list_add(&packet->queue, &hw->tx_queue[0]);
+ hw->tx_queued++;
spin_unlock_irqrestore(&hw->spinlock, flags);
} else {
if (packet->packet_callback)
@@ -949,12 +953,10 @@
unsigned long flags;
spin_lock_irqsave(&hw->spinlock, flags);
- if (hw->tx_queued && hw->tx_ready != 0) {
+ if (hw->tx_queued && hw->tx_ready) {
int priority;
struct ipw_tx_packet *packet = NULL;
- hw->tx_ready--;
-
/* Pick a packet */
for (priority = 0; priority < priority_limit; priority++) {
if (!list_empty(&hw->tx_queue[priority])) {
@@ -963,6 +965,7 @@
struct ipw_tx_packet,
queue);
+ hw->tx_queued--;
list_del(&packet->queue);
break;
@@ -973,6 +976,7 @@
spin_unlock_irqrestore(&hw->spinlock, flags);
return 0;
}
+
spin_unlock_irqrestore(&hw->spinlock, flags);
/* Send */
@@ -1063,7 +1067,7 @@
if (irqn & IR_TXINTR) {
ack |= IR_TXINTR;
spin_lock_irqsave(&hw->spinlock, flags);
- hw->tx_ready++;
+ hw->tx_ready = 1;
spin_unlock_irqrestore(&hw->spinlock, flags);
}
/* Received data */
@@ -1170,7 +1174,7 @@
if (memrxdone & MEMRX_RX_DONE) {
writew(0, &hw->memory_info_regs->memreg_rx_done);
spin_lock_irqsave(&hw->spinlock, flags);
- hw->tx_ready++;
+ hw->tx_ready = 1;
spin_unlock_irqrestore(&hw->spinlock, flags);
tx = 1;
}
@@ -1234,7 +1238,7 @@
spin_lock_irqsave(&hw->spinlock, flags);
list_add_tail(&packet->queue, &hw->tx_queue[priority]);
- hw->tx_queued = 1;
+ hw->tx_queued++;
spin_unlock_irqrestore(&hw->spinlock, flags);
flush_packets_to_hw(hw);
diff --git a/drivers/char/snsc_event.c b/drivers/char/snsc_event.c
index 53b3d44..55a9589 100644
--- a/drivers/char/snsc_event.c
+++ b/drivers/char/snsc_event.c
@@ -17,7 +17,7 @@
#include <linux/interrupt.h>
#include <linux/sched.h>
-#include <linux/byteorder/generic.h>
+#include <asm/byteorder.h>
#include <asm/sn/sn_sal.h>
#include <asm/unaligned.h>
#include "snsc.h"
diff --git a/drivers/char/synclink_gt.c b/drivers/char/synclink_gt.c
index 2001b0e..55c1653 100644
--- a/drivers/char/synclink_gt.c
+++ b/drivers/char/synclink_gt.c
@@ -916,7 +916,7 @@
{
struct slgt_info *info = tty->driver_data;
unsigned long flags;
- int ret;
+ int ret = 0;
if (sanity_check(info, tty->name, "put_char"))
return 0;
diff --git a/drivers/char/sysrq.c b/drivers/char/sysrq.c
index 9e9bad8b..dbce126 100644
--- a/drivers/char/sysrq.c
+++ b/drivers/char/sysrq.c
@@ -402,6 +402,7 @@
&sysrq_showstate_blocked_op, /* w */
/* x: May be registered on ppc/powerpc for xmon */
NULL, /* x */
+ /* y: May be registered on sparc64 for global register dump */
NULL, /* y */
NULL /* z */
};
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index 49c1a22..e94bee0 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -1215,10 +1215,11 @@
if (!tty->pgrp) {
printk(KERN_WARNING "tty_check_change: tty->pgrp == NULL!\n");
- goto out;
+ goto out_unlock;
}
if (task_pgrp(current) == tty->pgrp)
- goto out;
+ goto out_unlock;
+ spin_unlock_irqrestore(&tty->ctrl_lock, flags);
if (is_ignored(SIGTTOU))
goto out;
if (is_current_pgrp_orphaned()) {
@@ -1229,6 +1230,8 @@
set_thread_flag(TIF_SIGPENDING);
ret = -ERESTARTSYS;
out:
+ return ret;
+out_unlock:
spin_unlock_irqrestore(&tty->ctrl_lock, flags);
return ret;
}
diff --git a/drivers/char/viocons.c b/drivers/char/viocons.c
index 3d3e1c2..65fb848 100644
--- a/drivers/char/viocons.c
+++ b/drivers/char/viocons.c
@@ -7,7 +7,7 @@
* Authors: Dave Boutcher <boutcher@us.ibm.com>
* Ryan Arnold <ryanarn@us.ibm.com>
* Colin Devilbiss <devilbis@us.ibm.com>
- * Stephen Rothwell <sfr@au1.ibm.com>
+ * Stephen Rothwell
*
* (C) Copyright 2000, 2001, 2002, 2003, 2004 IBM Corporation
*
diff --git a/drivers/char/viotape.c b/drivers/char/viotape.c
index 58aad638..c39ddaf 100644
--- a/drivers/char/viotape.c
+++ b/drivers/char/viotape.c
@@ -6,7 +6,7 @@
* Authors: Dave Boutcher <boutcher@us.ibm.com>
* Ryan Arnold <ryanarn@us.ibm.com>
* Colin Devilbiss <devilbis@us.ibm.com>
- * Stephen Rothwell <sfr@au1.ibm.com>
+ * Stephen Rothwell
*
* (C) Copyright 2000-2004 IBM Corporation
*
diff --git a/drivers/char/vme_scc.c b/drivers/char/vme_scc.c
index e122a0e..f17ac04 100644
--- a/drivers/char/vme_scc.c
+++ b/drivers/char/vme_scc.c
@@ -89,9 +89,7 @@
static struct tty_driver *scc_driver;
-struct scc_port scc_ports[2];
-
-int scc_initialized = 0;
+static struct scc_port scc_ports[2];
/*---------------------------------------------------------------------------
* Interface from generic_serial.c back here
diff --git a/drivers/char/vt.c b/drivers/char/vt.c
index fa1ffbf..935f1c2 100644
--- a/drivers/char/vt.c
+++ b/drivers/char/vt.c
@@ -434,7 +434,7 @@
vc->vc_blink, vc->vc_underline,
vc->vc_reverse ^ vc->vc_decscnm, vc->vc_italic);
vc->vc_video_erase_char = (build_attr(vc, vc->vc_color, 1, vc->vc_blink, 0, vc->vc_decscnm, 0) << 8) | ' ';
- vc->vc_scrl_erase_char = (build_attr(vc, vc->vc_def_color, 1, false, false, false, false) << 8) | ' ';
+ vc->vc_scrl_erase_char = (build_attr(vc, vc->vc_def_color, 1, false, false, vc->vc_decscnm, false) << 8) | ' ';
}
/* Note: inverting the screen twice should revert to the original state */
@@ -909,7 +909,7 @@
if (vc->vc_tty) {
struct winsize ws, *cws = &vc->vc_tty->winsize;
- unsigned long flags;
+ struct pid *pgrp = NULL;
memset(&ws, 0, sizeof(ws));
ws.ws_row = vc->vc_rows;
@@ -917,11 +917,14 @@
ws.ws_ypixel = vc->vc_scan_lines;
mutex_lock(&vc->vc_tty->termios_mutex);
- spin_lock_irqsave(&vc->vc_tty->ctrl_lock, flags);
- if ((ws.ws_row != cws->ws_row || ws.ws_col != cws->ws_col) &&
- vc->vc_tty->pgrp)
+ spin_lock_irq(&vc->vc_tty->ctrl_lock);
+ if ((ws.ws_row != cws->ws_row || ws.ws_col != cws->ws_col))
+ pgrp = get_pid(vc->vc_tty->pgrp);
+ spin_unlock_irq(&vc->vc_tty->ctrl_lock);
+ if (pgrp) {
kill_pgrp(vc->vc_tty->pgrp, SIGWINCH, 1);
- spin_unlock_irqrestore(&vc->vc_tty->ctrl_lock, flags);
+ put_pid(pgrp);
+ }
*cws = ws;
mutex_unlock(&vc->vc_tty->termios_mutex);
}
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index 7fce038..1d41496 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -412,7 +412,7 @@
int ret;
mutex_unlock(&cpufreq_governor_mutex);
- ret = request_module(name);
+ ret = request_module("%s", name);
mutex_lock(&cpufreq_governor_mutex);
if (ret == 0)
@@ -625,7 +625,7 @@
unsigned int freq = 0;
unsigned int ret;
- if (!policy->governor->store_setspeed)
+ if (!policy->governor || !policy->governor->store_setspeed)
return -EINVAL;
ret = sscanf(buf, "%u", &freq);
@@ -639,7 +639,7 @@
static ssize_t show_scaling_setspeed(struct cpufreq_policy *policy, char *buf)
{
- if (!policy->governor->show_setspeed)
+ if (!policy->governor || !policy->governor->show_setspeed)
return sprintf(buf, "<unsupported>\n");
return policy->governor->show_setspeed(policy, buf);
@@ -928,13 +928,13 @@
policy->user_policy.policy = policy->policy;
policy->user_policy.governor = policy->governor;
- unlock_policy_rwsem_write(cpu);
-
if (ret) {
dprintk("setting policy failed\n");
goto err_out_unregister;
}
+ unlock_policy_rwsem_write(cpu);
+
kobject_uevent(&policy->kobj, KOBJ_ADD);
module_put(cpufreq_driver->owner);
dprintk("initialization complete\n");
diff --git a/drivers/cpufreq/freq_table.c b/drivers/cpufreq/freq_table.c
index ae6cd60..b64c6bc 100644
--- a/drivers/cpufreq/freq_table.c
+++ b/drivers/cpufreq/freq_table.c
@@ -2,6 +2,11 @@
* linux/drivers/cpufreq/freq_table.c
*
* Copyright (C) 2002 - 2003 Dominik Brodowski
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
*/
#include <linux/kernel.h>
diff --git a/drivers/cpuidle/cpuidle.c b/drivers/cpuidle/cpuidle.c
index fc555a9..23554b6 100644
--- a/drivers/cpuidle/cpuidle.c
+++ b/drivers/cpuidle/cpuidle.c
@@ -38,6 +38,8 @@
static void cpuidle_kick_cpus(void) {}
#endif
+static int __cpuidle_register_device(struct cpuidle_device *dev);
+
/**
* cpuidle_idle_call - the main idle loop
*
@@ -138,6 +140,12 @@
if (!dev->state_count)
return -EINVAL;
+ if (dev->registered == 0) {
+ ret = __cpuidle_register_device(dev);
+ if (ret)
+ return ret;
+ }
+
if ((ret = cpuidle_add_state_sysfs(dev)))
return ret;
@@ -232,10 +240,13 @@
#endif /* CONFIG_ARCH_HAS_CPU_RELAX */
/**
- * cpuidle_register_device - registers a CPU's idle PM feature
+ * __cpuidle_register_device - internal register function called before register
+ * and enable routines
* @dev: the cpu
+ *
+ * cpuidle_lock mutex must be held before this is called
*/
-int cpuidle_register_device(struct cpuidle_device *dev)
+static int __cpuidle_register_device(struct cpuidle_device *dev)
{
int ret;
struct sys_device *sys_dev = get_cpu_sysdev((unsigned long)dev->cpu);
@@ -247,18 +258,34 @@
init_completion(&dev->kobj_unregister);
- mutex_lock(&cpuidle_lock);
-
poll_idle_init(dev);
per_cpu(cpuidle_devices, dev->cpu) = dev;
list_add(&dev->device_list, &cpuidle_detected_devices);
if ((ret = cpuidle_add_sysfs(sys_dev))) {
- mutex_unlock(&cpuidle_lock);
module_put(cpuidle_curr_driver->owner);
return ret;
}
+ dev->registered = 1;
+ return 0;
+}
+
+/**
+ * cpuidle_register_device - registers a CPU's idle PM feature
+ * @dev: the cpu
+ */
+int cpuidle_register_device(struct cpuidle_device *dev)
+{
+ int ret;
+
+ mutex_lock(&cpuidle_lock);
+
+ if ((ret = __cpuidle_register_device(dev))) {
+ mutex_unlock(&cpuidle_lock);
+ return ret;
+ }
+
cpuidle_enable_device(dev);
cpuidle_install_idle_handler();
@@ -278,6 +305,9 @@
{
struct sys_device *sys_dev = get_cpu_sysdev((unsigned long)dev->cpu);
+ if (dev->registered == 0)
+ return;
+
cpuidle_pause_and_lock();
cpuidle_disable_device(dev);
diff --git a/drivers/dma/iop-adma.c b/drivers/dma/iop-adma.c
index 762b729..0ec0f43 100644
--- a/drivers/dma/iop-adma.c
+++ b/drivers/dma/iop-adma.c
@@ -821,10 +821,10 @@
dev_dbg(device->common.dev, "%s\n", __func__);
- src = kzalloc(sizeof(u8) * IOP_ADMA_TEST_SIZE, GFP_KERNEL);
+ src = kmalloc(IOP_ADMA_TEST_SIZE, GFP_KERNEL);
if (!src)
return -ENOMEM;
- dest = kzalloc(sizeof(u8) * IOP_ADMA_TEST_SIZE, GFP_KERNEL);
+ dest = kzalloc(IOP_ADMA_TEST_SIZE, GFP_KERNEL);
if (!dest) {
kfree(src);
return -ENOMEM;
@@ -834,8 +834,6 @@
for (i = 0; i < IOP_ADMA_TEST_SIZE; i++)
((u8 *) src)[i] = (u8)i;
- memset(dest, 0, IOP_ADMA_TEST_SIZE);
-
/* Start copy, using first DMA channel */
dma_chan = container_of(device->common.channels.next,
struct dma_chan,
diff --git a/drivers/edac/mpc85xx_edac.c b/drivers/edac/mpc85xx_edac.c
index 065732d..d49361bf 100644
--- a/drivers/edac/mpc85xx_edac.c
+++ b/drivers/edac/mpc85xx_edac.c
@@ -20,7 +20,6 @@
#include <linux/of_platform.h>
#include <linux/of_device.h>
-#include <asm/mpc85xx.h>
#include "edac_module.h"
#include "edac_core.h"
#include "mpc85xx_edac.h"
@@ -43,8 +42,6 @@
static u32 orig_l2_err_disable;
static u32 orig_hid1;
-static const char *mpc85xx_ctl_name = "MPC85xx";
-
/************************ MC SYSFS parts ***********************************/
static ssize_t mpc85xx_mc_inject_data_hi_show(struct mem_ctl_info *mci,
diff --git a/drivers/firewire/fw-cdev.c b/drivers/firewire/fw-cdev.c
index 4a54192..dda1401 100644
--- a/drivers/firewire/fw-cdev.c
+++ b/drivers/firewire/fw-cdev.c
@@ -113,6 +113,11 @@
if (device == NULL)
return -ENODEV;
+ if (fw_device_is_shutdown(device)) {
+ fw_device_put(device);
+ return -ENODEV;
+ }
+
client = kzalloc(sizeof(*client), GFP_KERNEL);
if (client == NULL) {
fw_device_put(device);
@@ -901,6 +906,9 @@
{
struct client *client = file->private_data;
+ if (fw_device_is_shutdown(client->device))
+ return -ENODEV;
+
return dispatch_ioctl(client, cmd, (void __user *) arg);
}
@@ -911,6 +919,9 @@
{
struct client *client = file->private_data;
+ if (fw_device_is_shutdown(client->device))
+ return -ENODEV;
+
return dispatch_ioctl(client, cmd, compat_ptr(arg));
}
#endif
@@ -922,6 +933,9 @@
unsigned long size;
int page_count, retval;
+ if (fw_device_is_shutdown(client->device))
+ return -ENODEV;
+
/* FIXME: We could support multiple buffers, but we don't. */
if (client->buffer.pages != NULL)
return -EBUSY;
diff --git a/drivers/firmware/edd.c b/drivers/firmware/edd.c
index 74401198..9e4f59d 100644
--- a/drivers/firmware/edd.c
+++ b/drivers/firmware/edd.c
@@ -753,7 +753,7 @@
if (!edd_num_devices()) {
printk(KERN_INFO "EDD information not available.\n");
- return 1;
+ return -ENODEV;
}
edd_kset = kset_create_and_add("edd", NULL, firmware_kobj);
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 7f138c6..beaf6b3 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -127,7 +127,7 @@
unsigned long flags;
int i;
- if (!gpio_is_valid(start) || !gpio_is_valid(start + ngpio))
+ if (!gpio_is_valid(start) || !gpio_is_valid(start + ngpio - 1))
return -EINVAL;
spin_lock_irqsave(&gpio_lock, flags);
@@ -170,7 +170,7 @@
unsigned id;
int base = chip->base;
- if ((!gpio_is_valid(base) || !gpio_is_valid(base + chip->ngpio))
+ if ((!gpio_is_valid(base) || !gpio_is_valid(base + chip->ngpio - 1))
&& base >= 0) {
status = -EINVAL;
goto fail;
@@ -207,7 +207,7 @@
/* failures here can mean systems won't boot... */
if (status)
pr_err("gpiochip_add: gpios %d..%d (%s) not registered\n",
- chip->base, chip->base + chip->ngpio,
+ chip->base, chip->base + chip->ngpio - 1,
chip->label ? : "generic");
return status;
}
diff --git a/drivers/gpio/mcp23s08.c b/drivers/gpio/mcp23s08.c
index 7fb5b9d..7f92fdd 100644
--- a/drivers/gpio/mcp23s08.c
+++ b/drivers/gpio/mcp23s08.c
@@ -168,7 +168,7 @@
{
struct mcp23s08 *mcp;
char bank;
- unsigned t;
+ int t;
unsigned mask;
mcp = container_of(chip, struct mcp23s08, chip);
diff --git a/drivers/gpio/pca953x.c b/drivers/gpio/pca953x.c
index 93f9167..7e40e8a 100644
--- a/drivers/gpio/pca953x.c
+++ b/drivers/gpio/pca953x.c
@@ -30,6 +30,7 @@
{ "pca9537", 4, },
{ "pca9538", 8, },
{ "pca9539", 16, },
+ { "pca9554", 8, },
{ "pca9555", 16, },
{ "pca9557", 8, },
/* REVISIT several pca955x parts should work here too */
diff --git a/drivers/hid/hid-debug.c b/drivers/hid/hid-debug.c
index f88714b..47ac1a7 100644
--- a/drivers/hid/hid-debug.c
+++ b/drivers/hid/hid-debug.c
@@ -1,6 +1,4 @@
/*
- * $Id: hid-debug.h,v 1.8 2001/09/25 09:37:57 vojtech Exp $
- *
* (c) 1999 Andreas Gal <gal@cs.uni-magdeburg.de>
* (c) 2000-2001 Vojtech Pavlik <vojtech@ucw.cz>
* (c) 2007 Jiri Kosina
diff --git a/drivers/hid/hid-input.c b/drivers/hid/hid-input.c
index c3eb3f13..5c52a20 100644
--- a/drivers/hid/hid-input.c
+++ b/drivers/hid/hid-input.c
@@ -1,6 +1,4 @@
/*
- * $Id: hid-input.c,v 1.2 2002/04/23 00:59:25 rdamazio Exp $
- *
* Copyright (c) 2000-2001 Vojtech Pavlik
* Copyright (c) 2006-2007 Jiri Kosina
*
@@ -218,8 +216,9 @@
}
}
- if (test_bit(usage->code, hid->pb_pressed_numlock) ||
- test_bit(LED_NUML, input->led)) {
+ if (hid->quirks & HID_QUIRK_APPLE_NUMLOCK_EMULATION && (
+ test_bit(usage->code, hid->pb_pressed_numlock) ||
+ test_bit(LED_NUML, input->led))) {
trans = find_translation(powerbook_numlock_keys, usage->code);
if (trans) {
diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c
index d3f8d91..1df832a 100644
--- a/drivers/hid/usbhid/hid-quirks.c
+++ b/drivers/hid/usbhid/hid-quirks.c
@@ -325,6 +325,10 @@
#define USB_DEVICE_ID_MGE_UPS 0xffff
#define USB_DEVICE_ID_MGE_UPS1 0x0001
+#define USB_VENDOR_ID_MICROCHIP 0x04d8
+#define USB_DEVICE_ID_PICKIT1 0x0032
+#define USB_DEVICE_ID_PICKIT2 0x0033
+
#define USB_VENDOR_ID_MICROSOFT 0x045e
#define USB_DEVICE_ID_SIDEWINDER_GV 0x003b
#define USB_DEVICE_ID_WIRELESS_OPTICAL_DESKTOP_3_0 0x009d
@@ -371,6 +375,9 @@
#define USB_VENDOR_ID_SONY 0x054c
#define USB_DEVICE_ID_SONY_PS3_CONTROLLER 0x0268
+#define USB_VENDOR_ID_SOUNDGRAPH 0x15c2
+#define USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD 0x0038
+
#define USB_VENDOR_ID_SUN 0x0430
#define USB_DEVICE_ID_RARITAN_KVM_DONGLE 0xcdab
@@ -567,6 +574,7 @@
{ USB_VENDOR_ID_PANJIT, 0x0002, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_PANJIT, 0x0003, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_PANJIT, 0x0004, HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_SOUNDGRAPH, USB_DEVICE_ID_SOUNDGRAPH_IMON_LCD, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_LABPRO, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_GOTEMP, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_SKIP, HID_QUIRK_IGNORE },
@@ -580,6 +588,9 @@
{ USB_VENDOR_ID_ACECAD, USB_DEVICE_ID_ACECAD_FLAIR, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_ACECAD, USB_DEVICE_ID_ACECAD_302, HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_MICROCHIP, USB_DEVICE_ID_PICKIT1, HID_QUIRK_IGNORE },
+ { USB_VENDOR_ID_MICROCHIP, USB_DEVICE_ID_PICKIT2, HID_QUIRK_IGNORE },
+
{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_ELITE_KBD, HID_QUIRK_LOGITECH_IGNORE_DOUBLED_WHEEL | HID_QUIRK_LOGITECH_EXPANDED_KEYMAP },
{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_CORDLESS_DESKTOP_LX500, HID_QUIRK_LOGITECH_IGNORE_DOUBLED_WHEEL | HID_QUIRK_LOGITECH_EXPANDED_KEYMAP },
@@ -611,28 +622,28 @@
{ USB_VENDOR_ID_WISEGROUP_LTD, USB_DEVICE_ID_SMARTJOY_DUAL_PLUS, HID_QUIRK_NOGET | HID_QUIRK_MULTI_INPUT },
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_ANSI, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_ISO, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER_ANSI, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER_ISO, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE | HID_QUIRK_APPLE_ISO_KEYBOARD},
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER_JIS, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER3_ANSI, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER3_ISO, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE | HID_QUIRK_APPLE_ISO_KEYBOARD},
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER3_JIS, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_ANSI, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_ISO, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE | HID_QUIRK_APPLE_ISO_KEYBOARD},
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_JIS, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_ANSI, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_ISO, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER_ANSI, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER_ISO, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE | HID_QUIRK_APPLE_ISO_KEYBOARD},
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER_JIS, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER3_ANSI, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER3_ISO, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE | HID_QUIRK_APPLE_ISO_KEYBOARD},
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER3_JIS, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_ANSI, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_ISO, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE | HID_QUIRK_APPLE_ISO_KEYBOARD},
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_JIS, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_ANSI, HID_QUIRK_APPLE_HAS_FN },
{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_ISO, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_APPLE_ISO_KEYBOARD },
{ USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_JIS, HID_QUIRK_APPLE_HAS_FN },
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_HF_ANSI, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_HF_ISO, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_HF_JIS, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ANSI, HID_QUIRK_APPLE_HAS_FN },
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ISO, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_APPLE_ISO_KEYBOARD },
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_JIS, HID_QUIRK_APPLE_HAS_FN },
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_HF_ANSI, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_HF_ISO, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_HF_JIS, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ANSI, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN },
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ISO, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_APPLE_ISO_KEYBOARD },
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_JIS, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN },
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
{ USB_VENDOR_ID_DELL, USB_DEVICE_ID_DELL_W7658, HID_QUIRK_RESET_LEDS },
{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_KBD, HID_QUIRK_RESET_LEDS },
diff --git a/drivers/hid/usbhid/usbkbd.c b/drivers/hid/usbhid/usbkbd.c
index 5d9dbb4..3cd46d2 100644
--- a/drivers/hid/usbhid/usbkbd.c
+++ b/drivers/hid/usbhid/usbkbd.c
@@ -1,6 +1,4 @@
/*
- * $Id: usbkbd.c,v 1.27 2001/12/27 10:37:41 vojtech Exp $
- *
* Copyright (c) 1999-2001 Vojtech Pavlik
*
* USB HIDBP Keyboard support
diff --git a/drivers/hid/usbhid/usbmouse.c b/drivers/hid/usbhid/usbmouse.c
index df0d96d..703e9d0 100644
--- a/drivers/hid/usbhid/usbmouse.c
+++ b/drivers/hid/usbhid/usbmouse.c
@@ -1,6 +1,4 @@
/*
- * $Id: usbmouse.c,v 1.15 2001/12/27 10:37:41 vojtech Exp $
- *
* Copyright (c) 1999-2001 Vojtech Pavlik
*
* USB HIDBP Mouse support
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 4dc76bc..00ff533 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -330,6 +330,20 @@
sensor inside your CPU. Supported all are all known variants
of Intel Core family.
+config SENSORS_IBMAEM
+ tristate "IBM Active Energy Manager temperature/power sensors and control"
+ select IPMI_SI
+ depends on IPMI_HANDLER
+ help
+ If you say yes here you get support for the temperature and
+ power sensors and capping hardware in various IBM System X
+ servers that support Active Energy Manager. This includes
+ the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2,
+ and certain HS2x/LS2x/QS2x blades.
+
+ This driver can also be built as a module. If so, the module
+ will be called ibmaem.
+
config SENSORS_IBMPEX
tristate "IBM PowerExecutive temperature/power sensors"
select IPMI_SI
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 3bdb05a..d098677 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -41,6 +41,7 @@
obj-$(CONFIG_SENSORS_GL520SM) += gl520sm.o
obj-$(CONFIG_SENSORS_HDAPS) += hdaps.o
obj-$(CONFIG_SENSORS_I5K_AMB) += i5k_amb.o
+obj-$(CONFIG_SENSORS_IBMAEM) += ibmaem.o
obj-$(CONFIG_SENSORS_IBMPEX) += ibmpex.o
obj-$(CONFIG_SENSORS_IT87) += it87.o
obj-$(CONFIG_SENSORS_K8TEMP) += k8temp.o
diff --git a/drivers/hwmon/hdaps.c b/drivers/hwmon/hdaps.c
index bab5fd2..26df06f 100644
--- a/drivers/hwmon/hdaps.c
+++ b/drivers/hwmon/hdaps.c
@@ -515,12 +515,14 @@
HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad R50"),
HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad R51"),
HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad R52"),
+ HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad R61i"),
HDAPS_DMI_MATCH_INVERT("IBM", "ThinkPad T41p"),
HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad T41"),
HDAPS_DMI_MATCH_INVERT("IBM", "ThinkPad T42p"),
HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad T42"),
HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad T43"),
HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad T60"),
+ HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad T61"),
HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad X40"),
HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad X41"),
HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad X60"),
diff --git a/drivers/hwmon/i5k_amb.c b/drivers/hwmon/i5k_amb.c
index 6ac5c6f..f9e2ed6 100644
--- a/drivers/hwmon/i5k_amb.c
+++ b/drivers/hwmon/i5k_amb.c
@@ -111,6 +111,7 @@
void __iomem *amb_mmio;
struct i5k_device_attribute *attrs;
unsigned int num_attrs;
+ unsigned long chipset_id;
};
static ssize_t show_name(struct device *dev, struct device_attribute *devattr,
@@ -382,7 +383,8 @@
return res;
}
-static int __devinit i5k_find_amb_registers(struct i5k_amb_data *data)
+static int __devinit i5k_find_amb_registers(struct i5k_amb_data *data,
+ unsigned long devid)
{
struct pci_dev *pcidev;
u32 val32;
@@ -390,7 +392,7 @@
/* Find AMB register memory space */
pcidev = pci_get_device(PCI_VENDOR_ID_INTEL,
- PCI_DEVICE_ID_INTEL_5000_ERR,
+ devid,
NULL);
if (!pcidev)
return -ENODEV;
@@ -409,6 +411,8 @@
goto out;
}
+ data->chipset_id = devid;
+
res = 0;
out:
pci_dev_put(pcidev);
@@ -441,10 +445,30 @@
return res;
}
+static unsigned long i5k_channel_pci_id(struct i5k_amb_data *data,
+ unsigned long channel)
+{
+ switch (data->chipset_id) {
+ case PCI_DEVICE_ID_INTEL_5000_ERR:
+ return PCI_DEVICE_ID_INTEL_5000_FBD0 + channel;
+ case PCI_DEVICE_ID_INTEL_5400_ERR:
+ return PCI_DEVICE_ID_INTEL_5400_FBD0 + channel;
+ default:
+ BUG();
+ }
+}
+
+static unsigned long chipset_ids[] = {
+ PCI_DEVICE_ID_INTEL_5000_ERR,
+ PCI_DEVICE_ID_INTEL_5400_ERR,
+ 0
+};
+
static int __devinit i5k_amb_probe(struct platform_device *pdev)
{
struct i5k_amb_data *data;
struct resource *reso;
+ int i;
int res = -ENODEV;
data = kzalloc(sizeof(*data), GFP_KERNEL);
@@ -452,19 +476,24 @@
return -ENOMEM;
/* Figure out where the AMB registers live */
- res = i5k_find_amb_registers(data);
+ i = 0;
+ do {
+ res = i5k_find_amb_registers(data, chipset_ids[i]);
+ i++;
+ } while (res && chipset_ids[i]);
+
if (res)
goto err;
/* Copy the DIMM presence map for the first two channels */
res = i5k_channel_probe(&data->amb_present[0],
- PCI_DEVICE_ID_INTEL_5000_FBD0);
+ i5k_channel_pci_id(data, 0));
if (res)
goto err;
/* Copy the DIMM presence map for the optional second two channels */
i5k_channel_probe(&data->amb_present[2],
- PCI_DEVICE_ID_INTEL_5000_FBD1);
+ i5k_channel_pci_id(data, 1));
/* Set up resource regions */
reso = request_mem_region(data->amb_base, data->amb_len, DRVNAME);
diff --git a/drivers/hwmon/ibmaem.c b/drivers/hwmon/ibmaem.c
new file mode 100644
index 0000000..c9416e6
--- /dev/null
+++ b/drivers/hwmon/ibmaem.c
@@ -0,0 +1,1111 @@
+/*
+ * A hwmon driver for the IBM Active Energy Manager temperature/power sensors
+ * and capping functionality.
+ * Copyright (C) 2008 IBM
+ *
+ * Author: Darrick J. Wong <djwong@us.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/ipmi.h>
+#include <linux/module.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/jiffies.h>
+#include <linux/mutex.h>
+#include <linux/kdev_t.h>
+#include <linux/spinlock.h>
+#include <linux/idr.h>
+#include <linux/sched.h>
+#include <linux/platform_device.h>
+#include <linux/math64.h>
+#include <linux/time.h>
+
+#define REFRESH_INTERVAL (HZ)
+#define IPMI_TIMEOUT (30 * HZ)
+#define DRVNAME "aem"
+
+#define AEM_NETFN 0x2E
+
+#define AEM_FIND_FW_CMD 0x80
+#define AEM_ELEMENT_CMD 0x81
+#define AEM_FW_INSTANCE_CMD 0x82
+
+#define AEM_READ_ELEMENT_CFG 0x80
+#define AEM_READ_BUFFER 0x81
+#define AEM_READ_REGISTER 0x82
+#define AEM_WRITE_REGISTER 0x83
+#define AEM_SET_REG_MASK 0x84
+#define AEM_CLEAR_REG_MASK 0x85
+#define AEM_READ_ELEMENT_CFG2 0x86
+
+#define AEM_CONTROL_ELEMENT 0
+#define AEM_ENERGY_ELEMENT 1
+#define AEM_CLOCK_ELEMENT 4
+#define AEM_POWER_CAP_ELEMENT 7
+#define AEM_EXHAUST_ELEMENT 9
+#define AEM_POWER_ELEMENT 10
+
+#define AEM_MODULE_TYPE_ID 0x0001
+
+#define AEM2_NUM_ENERGY_REGS 2
+#define AEM2_NUM_PCAP_REGS 6
+#define AEM2_NUM_TEMP_REGS 2
+#define AEM2_NUM_SENSORS 14
+
+#define AEM1_NUM_ENERGY_REGS 1
+#define AEM1_NUM_SENSORS 3
+
+/* AEM 2.x has more energy registers */
+#define AEM_NUM_ENERGY_REGS AEM2_NUM_ENERGY_REGS
+/* AEM 2.x needs more sensor files */
+#define AEM_NUM_SENSORS AEM2_NUM_SENSORS
+
+#define POWER_CAP 0
+#define POWER_CAP_MAX_HOTPLUG 1
+#define POWER_CAP_MAX 2
+#define POWER_CAP_MIN_WARNING 3
+#define POWER_CAP_MIN 4
+#define POWER_AUX 5
+
+#define AEM_DEFAULT_POWER_INTERVAL 1000
+#define AEM_MIN_POWER_INTERVAL 200
+#define UJ_PER_MJ 1000L
+
+static DEFINE_IDR(aem_idr);
+static DEFINE_SPINLOCK(aem_idr_lock);
+
+static struct device_driver aem_driver = {
+ .name = DRVNAME,
+ .bus = &platform_bus_type,
+};
+
+struct aem_ipmi_data {
+ struct completion read_complete;
+ struct ipmi_addr address;
+ ipmi_user_t user;
+ int interface;
+
+ struct kernel_ipmi_msg tx_message;
+ long tx_msgid;
+
+ void *rx_msg_data;
+ unsigned short rx_msg_len;
+ unsigned char rx_result;
+ int rx_recv_type;
+
+ struct device *bmc_device;
+};
+
+struct aem_ro_sensor_template {
+ char *label;
+ ssize_t (*show)(struct device *dev,
+ struct device_attribute *devattr,
+ char *buf);
+ int index;
+};
+
+struct aem_rw_sensor_template {
+ char *label;
+ ssize_t (*show)(struct device *dev,
+ struct device_attribute *devattr,
+ char *buf);
+ ssize_t (*set)(struct device *dev,
+ struct device_attribute *devattr,
+ const char *buf, size_t count);
+ int index;
+};
+
+struct aem_data {
+ struct list_head list;
+
+ struct device *hwmon_dev;
+ struct platform_device *pdev;
+ struct mutex lock;
+ char valid;
+ unsigned long last_updated; /* In jiffies */
+ u8 ver_major;
+ u8 ver_minor;
+ u8 module_handle;
+ int id;
+ struct aem_ipmi_data ipmi;
+
+ /* Function to update sensors */
+ void (*update)(struct aem_data *data);
+
+ /*
+ * AEM 1.x sensors:
+ * Available sensors:
+ * Energy meter
+ * Power meter
+ *
+ * AEM 2.x sensors:
+ * Two energy meters
+ * Two power meters
+ * Two temperature sensors
+ * Six power cap registers
+ */
+
+ /* sysfs attrs */
+ struct sensor_device_attribute sensors[AEM_NUM_SENSORS];
+
+ /* energy use in mJ */
+ u64 energy[AEM_NUM_ENERGY_REGS];
+
+ /* power sampling interval in ms */
+ unsigned long power_period[AEM_NUM_ENERGY_REGS];
+
+ /* Everything past here is for AEM2 only */
+
+ /* power caps in dW */
+ u16 pcap[AEM2_NUM_PCAP_REGS];
+
+ /* exhaust temperature in C */
+ u8 temp[AEM2_NUM_TEMP_REGS];
+};
+
+/* Data structures returned by the AEM firmware */
+struct aem_iana_id {
+ u8 bytes[3];
+};
+static struct aem_iana_id system_x_id = {
+ .bytes = {0x4D, 0x4F, 0x00}
+};
+
+/* These are used to find AEM1 instances */
+struct aem_find_firmware_req {
+ struct aem_iana_id id;
+ u8 rsvd;
+ __be16 index;
+ __be16 module_type_id;
+} __packed;
+
+struct aem_find_firmware_resp {
+ struct aem_iana_id id;
+ u8 num_instances;
+} __packed;
+
+/* These are used to find AEM2 instances */
+struct aem_find_instance_req {
+ struct aem_iana_id id;
+ u8 instance_number;
+ __be16 module_type_id;
+} __packed;
+
+struct aem_find_instance_resp {
+ struct aem_iana_id id;
+ u8 num_instances;
+ u8 major;
+ u8 minor;
+ u8 module_handle;
+ u16 record_id;
+} __packed;
+
+/* These are used to query sensors */
+struct aem_read_sensor_req {
+ struct aem_iana_id id;
+ u8 module_handle;
+ u8 element;
+ u8 subcommand;
+ u8 reg;
+ u8 rx_buf_size;
+} __packed;
+
+struct aem_read_sensor_resp {
+ struct aem_iana_id id;
+ u8 bytes[0];
+} __packed;
+
+/* Data structures to talk to the IPMI layer */
+struct aem_driver_data {
+ struct list_head aem_devices;
+ struct ipmi_smi_watcher bmc_events;
+ struct ipmi_user_hndl ipmi_hndlrs;
+};
+
+static void aem_register_bmc(int iface, struct device *dev);
+static void aem_bmc_gone(int iface);
+static void aem_msg_handler(struct ipmi_recv_msg *msg, void *user_msg_data);
+
+static void aem_remove_sensors(struct aem_data *data);
+static int aem_init_aem1(struct aem_ipmi_data *probe);
+static int aem_init_aem2(struct aem_ipmi_data *probe);
+static int aem1_find_sensors(struct aem_data *data);
+static int aem2_find_sensors(struct aem_data *data);
+static void update_aem1_sensors(struct aem_data *data);
+static void update_aem2_sensors(struct aem_data *data);
+
+static struct aem_driver_data driver_data = {
+ .aem_devices = LIST_HEAD_INIT(driver_data.aem_devices),
+ .bmc_events = {
+ .owner = THIS_MODULE,
+ .new_smi = aem_register_bmc,
+ .smi_gone = aem_bmc_gone,
+ },
+ .ipmi_hndlrs = {
+ .ipmi_recv_hndl = aem_msg_handler,
+ },
+};
+
+/* Functions to talk to the IPMI layer */
+
+/* Initialize IPMI address, message buffers and user data */
+static int aem_init_ipmi_data(struct aem_ipmi_data *data, int iface,
+ struct device *bmc)
+{
+ int err;
+
+ init_completion(&data->read_complete);
+ data->bmc_device = bmc;
+
+ /* Initialize IPMI address */
+ data->address.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE;
+ data->address.channel = IPMI_BMC_CHANNEL;
+ data->address.data[0] = 0;
+ data->interface = iface;
+
+ /* Initialize message buffers */
+ data->tx_msgid = 0;
+ data->tx_message.netfn = AEM_NETFN;
+
+ /* Create IPMI messaging interface user */
+ err = ipmi_create_user(data->interface, &driver_data.ipmi_hndlrs,
+ data, &data->user);
+ if (err < 0) {
+ dev_err(bmc, "Unable to register user with IPMI "
+ "interface %d\n", data->interface);
+ return -EACCES;
+ }
+
+ return 0;
+}
+
+/* Send an IPMI command */
+static int aem_send_message(struct aem_ipmi_data *data)
+{
+ int err;
+
+ err = ipmi_validate_addr(&data->address, sizeof(data->address));
+ if (err)
+ goto out;
+
+ data->tx_msgid++;
+ err = ipmi_request_settime(data->user, &data->address, data->tx_msgid,
+ &data->tx_message, data, 0, 0, 0);
+ if (err)
+ goto out1;
+
+ return 0;
+out1:
+ dev_err(data->bmc_device, "request_settime=%x\n", err);
+ return err;
+out:
+ dev_err(data->bmc_device, "validate_addr=%x\n", err);
+ return err;
+}
+
+/* Dispatch IPMI messages to callers */
+static void aem_msg_handler(struct ipmi_recv_msg *msg, void *user_msg_data)
+{
+ unsigned short rx_len;
+ struct aem_ipmi_data *data = user_msg_data;
+
+ if (msg->msgid != data->tx_msgid) {
+ dev_err(data->bmc_device, "Mismatch between received msgid "
+ "(%02x) and transmitted msgid (%02x)!\n",
+ (int)msg->msgid,
+ (int)data->tx_msgid);
+ ipmi_free_recv_msg(msg);
+ return;
+ }
+
+ data->rx_recv_type = msg->recv_type;
+ if (msg->msg.data_len > 0)
+ data->rx_result = msg->msg.data[0];
+ else
+ data->rx_result = IPMI_UNKNOWN_ERR_COMPLETION_CODE;
+
+ if (msg->msg.data_len > 1) {
+ rx_len = msg->msg.data_len - 1;
+ if (data->rx_msg_len < rx_len)
+ rx_len = data->rx_msg_len;
+ data->rx_msg_len = rx_len;
+ memcpy(data->rx_msg_data, msg->msg.data + 1, data->rx_msg_len);
+ } else
+ data->rx_msg_len = 0;
+
+ ipmi_free_recv_msg(msg);
+ complete(&data->read_complete);
+}
+
+/* ID functions */
+
+/* Obtain an id */
+static int aem_idr_get(int *id)
+{
+ int i, err;
+
+again:
+ if (unlikely(!idr_pre_get(&aem_idr, GFP_KERNEL)))
+ return -ENOMEM;
+
+ spin_lock(&aem_idr_lock);
+ err = idr_get_new(&aem_idr, NULL, &i);
+ spin_unlock(&aem_idr_lock);
+
+ if (unlikely(err == -EAGAIN))
+ goto again;
+ else if (unlikely(err))
+ return err;
+
+ *id = i & MAX_ID_MASK;
+ return 0;
+}
+
+/* Release an object ID */
+static void aem_idr_put(int id)
+{
+ spin_lock(&aem_idr_lock);
+ idr_remove(&aem_idr, id);
+ spin_unlock(&aem_idr_lock);
+}
+
+/* Sensor support functions */
+
+/* Read a sensor value */
+static int aem_read_sensor(struct aem_data *data, u8 elt, u8 reg,
+ void *buf, size_t size)
+{
+ int rs_size, res;
+ struct aem_read_sensor_req rs_req;
+ struct aem_read_sensor_resp *rs_resp;
+ struct aem_ipmi_data *ipmi = &data->ipmi;
+
+ /* AEM registers are 1, 2, 4 or 8 bytes */
+ switch (size) {
+ case 1:
+ case 2:
+ case 4:
+ case 8:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ rs_req.id = system_x_id;
+ rs_req.module_handle = data->module_handle;
+ rs_req.element = elt;
+ rs_req.subcommand = AEM_READ_REGISTER;
+ rs_req.reg = reg;
+ rs_req.rx_buf_size = size;
+
+ ipmi->tx_message.cmd = AEM_ELEMENT_CMD;
+ ipmi->tx_message.data = (char *)&rs_req;
+ ipmi->tx_message.data_len = sizeof(rs_req);
+
+ rs_size = sizeof(*rs_resp) + size;
+ rs_resp = kzalloc(rs_size, GFP_KERNEL);
+ if (!rs_resp)
+ return -ENOMEM;
+
+ ipmi->rx_msg_data = rs_resp;
+ ipmi->rx_msg_len = rs_size;
+
+ aem_send_message(ipmi);
+
+ res = wait_for_completion_timeout(&ipmi->read_complete, IPMI_TIMEOUT);
+ if (!res)
+ return -ETIMEDOUT;
+
+ if (ipmi->rx_result || ipmi->rx_msg_len != rs_size ||
+ memcmp(&rs_resp->id, &system_x_id, sizeof(system_x_id))) {
+ kfree(rs_resp);
+ return -ENOENT;
+ }
+
+ switch (size) {
+ case 1: {
+ u8 *x = buf;
+ *x = rs_resp->bytes[0];
+ break;
+ }
+ case 2: {
+ u16 *x = buf;
+ *x = be16_to_cpup((__be16 *)rs_resp->bytes);
+ break;
+ }
+ case 4: {
+ u32 *x = buf;
+ *x = be32_to_cpup((__be32 *)rs_resp->bytes);
+ break;
+ }
+ case 8: {
+ u64 *x = buf;
+ *x = be64_to_cpup((__be64 *)rs_resp->bytes);
+ break;
+ }
+ }
+
+ return 0;
+}
+
+/* Update AEM energy registers */
+static void update_aem_energy(struct aem_data *data)
+{
+ aem_read_sensor(data, AEM_ENERGY_ELEMENT, 0, &data->energy[0], 8);
+ if (data->ver_major < 2)
+ return;
+ aem_read_sensor(data, AEM_ENERGY_ELEMENT, 1, &data->energy[1], 8);
+}
+
+/* Update all AEM1 sensors */
+static void update_aem1_sensors(struct aem_data *data)
+{
+ mutex_lock(&data->lock);
+ if (time_before(jiffies, data->last_updated + REFRESH_INTERVAL) &&
+ data->valid)
+ goto out;
+
+ update_aem_energy(data);
+out:
+ mutex_unlock(&data->lock);
+}
+
+/* Update all AEM2 sensors */
+static void update_aem2_sensors(struct aem_data *data)
+{
+ int i;
+
+ mutex_lock(&data->lock);
+ if (time_before(jiffies, data->last_updated + REFRESH_INTERVAL) &&
+ data->valid)
+ goto out;
+
+ update_aem_energy(data);
+ aem_read_sensor(data, AEM_EXHAUST_ELEMENT, 0, &data->temp[0], 1);
+ aem_read_sensor(data, AEM_EXHAUST_ELEMENT, 1, &data->temp[1], 1);
+
+ for (i = POWER_CAP; i <= POWER_AUX; i++)
+ aem_read_sensor(data, AEM_POWER_CAP_ELEMENT, i,
+ &data->pcap[i], 2);
+out:
+ mutex_unlock(&data->lock);
+}
+
+/* Delete an AEM instance */
+static void aem_delete(struct aem_data *data)
+{
+ list_del(&data->list);
+ aem_remove_sensors(data);
+ hwmon_device_unregister(data->hwmon_dev);
+ ipmi_destroy_user(data->ipmi.user);
+ dev_set_drvdata(&data->pdev->dev, NULL);
+ platform_device_unregister(data->pdev);
+ aem_idr_put(data->id);
+ kfree(data);
+}
+
+/* Probe functions for AEM1 devices */
+
+/* Retrieve version and module handle for an AEM1 instance */
+static int aem_find_aem1_count(struct aem_ipmi_data *data)
+{
+ int res;
+ struct aem_find_firmware_req ff_req;
+ struct aem_find_firmware_resp ff_resp;
+
+ ff_req.id = system_x_id;
+ ff_req.index = 0;
+ ff_req.module_type_id = cpu_to_be16(AEM_MODULE_TYPE_ID);
+
+ data->tx_message.cmd = AEM_FIND_FW_CMD;
+ data->tx_message.data = (char *)&ff_req;
+ data->tx_message.data_len = sizeof(ff_req);
+
+ data->rx_msg_data = &ff_resp;
+ data->rx_msg_len = sizeof(ff_resp);
+
+ aem_send_message(data);
+
+ res = wait_for_completion_timeout(&data->read_complete, IPMI_TIMEOUT);
+ if (!res)
+ return -ETIMEDOUT;
+
+ if (data->rx_result || data->rx_msg_len != sizeof(ff_resp) ||
+ memcmp(&ff_resp.id, &system_x_id, sizeof(system_x_id)))
+ return -ENOENT;
+
+ return ff_resp.num_instances;
+}
+
+/* Find and initialize one AEM1 instance */
+static int aem_init_aem1_inst(struct aem_ipmi_data *probe, u8 module_handle)
+{
+ struct aem_data *data;
+ int i;
+ int res = -ENOMEM;
+
+ data = kzalloc(sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return res;
+ mutex_init(&data->lock);
+
+ /* Copy instance data */
+ data->ver_major = 1;
+ data->ver_minor = 0;
+ data->module_handle = module_handle;
+ for (i = 0; i < AEM1_NUM_ENERGY_REGS; i++)
+ data->power_period[i] = AEM_DEFAULT_POWER_INTERVAL;
+
+ /* Create sub-device for this fw instance */
+ if (aem_idr_get(&data->id))
+ goto id_err;
+
+ data->pdev = platform_device_alloc(DRVNAME, data->id);
+ if (!data->pdev)
+ goto dev_err;
+ data->pdev->dev.driver = &aem_driver;
+
+ res = platform_device_add(data->pdev);
+ if (res)
+ goto ipmi_err;
+
+ dev_set_drvdata(&data->pdev->dev, data);
+
+ /* Set up IPMI interface */
+ if (aem_init_ipmi_data(&data->ipmi, probe->interface,
+ probe->bmc_device))
+ goto ipmi_err;
+
+ /* Register with hwmon */
+ data->hwmon_dev = hwmon_device_register(&data->pdev->dev);
+
+ if (IS_ERR(data->hwmon_dev)) {
+ dev_err(&data->pdev->dev, "Unable to register hwmon "
+ "device for IPMI interface %d\n",
+ probe->interface);
+ goto hwmon_reg_err;
+ }
+
+ data->update = update_aem1_sensors;
+
+ /* Find sensors */
+ if (aem1_find_sensors(data))
+ goto sensor_err;
+
+ /* Add to our list of AEM devices */
+ list_add_tail(&data->list, &driver_data.aem_devices);
+
+ dev_info(data->ipmi.bmc_device, "Found AEM v%d.%d at 0x%X\n",
+ data->ver_major, data->ver_minor,
+ data->module_handle);
+ return 0;
+
+sensor_err:
+ hwmon_device_unregister(data->hwmon_dev);
+hwmon_reg_err:
+ ipmi_destroy_user(data->ipmi.user);
+ipmi_err:
+ dev_set_drvdata(&data->pdev->dev, NULL);
+ platform_device_unregister(data->pdev);
+dev_err:
+ aem_idr_put(data->id);
+id_err:
+ kfree(data);
+
+ return res;
+}
+
+/* Find and initialize all AEM1 instances */
+static int aem_init_aem1(struct aem_ipmi_data *probe)
+{
+ int num, i, err;
+
+ num = aem_find_aem1_count(probe);
+ for (i = 0; i < num; i++) {
+ err = aem_init_aem1_inst(probe, i);
+ if (err) {
+ dev_err(probe->bmc_device,
+ "Error %d initializing AEM1 0x%X\n",
+ err, i);
+ return err;
+ }
+ }
+
+ return 0;
+}
+
+/* Probe functions for AEM2 devices */
+
+/* Retrieve version and module handle for an AEM2 instance */
+static int aem_find_aem2(struct aem_ipmi_data *data,
+ struct aem_find_instance_resp *fi_resp,
+ int instance_num)
+{
+ int res;
+ struct aem_find_instance_req fi_req;
+
+ fi_req.id = system_x_id;
+ fi_req.instance_number = instance_num;
+ fi_req.module_type_id = cpu_to_be16(AEM_MODULE_TYPE_ID);
+
+ data->tx_message.cmd = AEM_FW_INSTANCE_CMD;
+ data->tx_message.data = (char *)&fi_req;
+ data->tx_message.data_len = sizeof(fi_req);
+
+ data->rx_msg_data = fi_resp;
+ data->rx_msg_len = sizeof(*fi_resp);
+
+ aem_send_message(data);
+
+ res = wait_for_completion_timeout(&data->read_complete, IPMI_TIMEOUT);
+ if (!res)
+ return -ETIMEDOUT;
+
+ if (data->rx_result || data->rx_msg_len != sizeof(*fi_resp) ||
+ memcmp(&fi_resp->id, &system_x_id, sizeof(system_x_id)))
+ return -ENOENT;
+
+ return 0;
+}
+
+/* Find and initialize one AEM2 instance */
+static int aem_init_aem2_inst(struct aem_ipmi_data *probe,
+ struct aem_find_instance_resp *fi_resp)
+{
+ struct aem_data *data;
+ int i;
+ int res = -ENOMEM;
+
+ data = kzalloc(sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return res;
+ mutex_init(&data->lock);
+
+ /* Copy instance data */
+ data->ver_major = fi_resp->major;
+ data->ver_minor = fi_resp->minor;
+ data->module_handle = fi_resp->module_handle;
+ for (i = 0; i < AEM2_NUM_ENERGY_REGS; i++)
+ data->power_period[i] = AEM_DEFAULT_POWER_INTERVAL;
+
+ /* Create sub-device for this fw instance */
+ if (aem_idr_get(&data->id))
+ goto id_err;
+
+ data->pdev = platform_device_alloc(DRVNAME, data->id);
+ if (!data->pdev)
+ goto dev_err;
+ data->pdev->dev.driver = &aem_driver;
+
+ res = platform_device_add(data->pdev);
+ if (res)
+ goto ipmi_err;
+
+ dev_set_drvdata(&data->pdev->dev, data);
+
+ /* Set up IPMI interface */
+ if (aem_init_ipmi_data(&data->ipmi, probe->interface,
+ probe->bmc_device))
+ goto ipmi_err;
+
+ /* Register with hwmon */
+ data->hwmon_dev = hwmon_device_register(&data->pdev->dev);
+
+ if (IS_ERR(data->hwmon_dev)) {
+ dev_err(&data->pdev->dev, "Unable to register hwmon "
+ "device for IPMI interface %d\n",
+ probe->interface);
+ goto hwmon_reg_err;
+ }
+
+ data->update = update_aem2_sensors;
+
+ /* Find sensors */
+ if (aem2_find_sensors(data))
+ goto sensor_err;
+
+ /* Add to our list of AEM devices */
+ list_add_tail(&data->list, &driver_data.aem_devices);
+
+ dev_info(data->ipmi.bmc_device, "Found AEM v%d.%d at 0x%X\n",
+ data->ver_major, data->ver_minor,
+ data->module_handle);
+ return 0;
+
+sensor_err:
+ hwmon_device_unregister(data->hwmon_dev);
+hwmon_reg_err:
+ ipmi_destroy_user(data->ipmi.user);
+ipmi_err:
+ dev_set_drvdata(&data->pdev->dev, NULL);
+ platform_device_unregister(data->pdev);
+dev_err:
+ aem_idr_put(data->id);
+id_err:
+ kfree(data);
+
+ return res;
+}
+
+/* Find and initialize all AEM2 instances */
+static int aem_init_aem2(struct aem_ipmi_data *probe)
+{
+ struct aem_find_instance_resp fi_resp;
+ int err;
+ int i = 0;
+
+ while (!aem_find_aem2(probe, &fi_resp, i)) {
+ if (fi_resp.major != 2) {
+ dev_err(probe->bmc_device, "Unknown AEM v%d; please "
+ "report this to the maintainer.\n",
+ fi_resp.major);
+ i++;
+ continue;
+ }
+ err = aem_init_aem2_inst(probe, &fi_resp);
+ if (err) {
+ dev_err(probe->bmc_device,
+ "Error %d initializing AEM2 0x%X\n",
+ err, fi_resp.module_handle);
+ return err;
+ }
+ i++;
+ }
+
+ return 0;
+}
+
+/* Probe a BMC for AEM firmware instances */
+static void aem_register_bmc(int iface, struct device *dev)
+{
+ struct aem_ipmi_data probe;
+
+ if (aem_init_ipmi_data(&probe, iface, dev))
+ return;
+
+ /* Ignore probe errors; they won't cause problems */
+ aem_init_aem1(&probe);
+ aem_init_aem2(&probe);
+
+ ipmi_destroy_user(probe.user);
+}
+
+/* Handle BMC deletion */
+static void aem_bmc_gone(int iface)
+{
+ struct aem_data *p1, *next1;
+
+ list_for_each_entry_safe(p1, next1, &driver_data.aem_devices, list)
+ if (p1->ipmi.interface == iface)
+ aem_delete(p1);
+}
+
+/* sysfs support functions */
+
+/* AEM device name */
+static ssize_t show_name(struct device *dev, struct device_attribute *devattr,
+ char *buf)
+{
+ struct aem_data *data = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%s%d\n", DRVNAME, data->ver_major);
+}
+static SENSOR_DEVICE_ATTR(name, S_IRUGO, show_name, NULL, 0);
+
+/* AEM device version */
+static ssize_t show_version(struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ struct aem_data *data = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%d.%d\n", data->ver_major, data->ver_minor);
+}
+static SENSOR_DEVICE_ATTR(version, S_IRUGO, show_version, NULL, 0);
+
+/* Display power use */
+static ssize_t aem_show_power(struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct aem_data *data = dev_get_drvdata(dev);
+ u64 before, after, delta, time;
+ signed long leftover;
+ struct timespec b, a;
+
+ mutex_lock(&data->lock);
+ update_aem_energy(data);
+ getnstimeofday(&b);
+ before = data->energy[attr->index];
+
+ leftover = schedule_timeout_interruptible(
+ msecs_to_jiffies(data->power_period[attr->index])
+ );
+ if (leftover) {
+ mutex_unlock(&data->lock);
+ return 0;
+ }
+
+ update_aem_energy(data);
+ getnstimeofday(&a);
+ after = data->energy[attr->index];
+ mutex_unlock(&data->lock);
+
+ time = timespec_to_ns(&a) - timespec_to_ns(&b);
+ delta = (after - before) * UJ_PER_MJ;
+
+ return sprintf(buf, "%llu\n",
+ (unsigned long long)div64_u64(delta * NSEC_PER_SEC, time));
+}
+
+/* Display energy use */
+static ssize_t aem_show_energy(struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct aem_data *a = dev_get_drvdata(dev);
+ a->update(a);
+
+ return sprintf(buf, "%llu\n",
+ (unsigned long long)a->energy[attr->index] * 1000);
+}
+
+/* Display power interval registers */
+static ssize_t aem_show_power_period(struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct aem_data *a = dev_get_drvdata(dev);
+ a->update(a);
+
+ return sprintf(buf, "%lu\n", a->power_period[attr->index]);
+}
+
+/* Set power interval registers */
+static ssize_t aem_set_power_period(struct device *dev,
+ struct device_attribute *devattr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct aem_data *a = dev_get_drvdata(dev);
+ unsigned long temp;
+ int res;
+
+ res = strict_strtoul(buf, 10, &temp);
+ if (res)
+ return res;
+
+ if (temp < AEM_MIN_POWER_INTERVAL)
+ return -EINVAL;
+
+ mutex_lock(&a->lock);
+ a->power_period[attr->index] = temp;
+ mutex_unlock(&a->lock);
+
+ return count;
+}
+
+/* Discover sensors on an AEM device */
+static int aem_register_sensors(struct aem_data *data,
+ struct aem_ro_sensor_template *ro,
+ struct aem_rw_sensor_template *rw)
+{
+ struct device *dev = &data->pdev->dev;
+ struct sensor_device_attribute *sensors = data->sensors;
+ int err;
+
+ /* Set up read-only sensors */
+ while (ro->label) {
+ sensors->dev_attr.attr.name = ro->label;
+ sensors->dev_attr.attr.mode = S_IRUGO;
+ sensors->dev_attr.show = ro->show;
+ sensors->index = ro->index;
+
+ err = device_create_file(dev, &sensors->dev_attr);
+ if (err) {
+ sensors->dev_attr.attr.name = NULL;
+ goto error;
+ }
+ sensors++;
+ ro++;
+ }
+
+ /* Set up read-write sensors */
+ while (rw->label) {
+ sensors->dev_attr.attr.name = rw->label;
+ sensors->dev_attr.attr.mode = S_IRUGO | S_IWUSR;
+ sensors->dev_attr.show = rw->show;
+ sensors->dev_attr.store = rw->set;
+ sensors->index = rw->index;
+
+ err = device_create_file(dev, &sensors->dev_attr);
+ if (err) {
+ sensors->dev_attr.attr.name = NULL;
+ goto error;
+ }
+ sensors++;
+ rw++;
+ }
+
+ err = device_create_file(dev, &sensor_dev_attr_name.dev_attr);
+ if (err)
+ goto error;
+ err = device_create_file(dev, &sensor_dev_attr_version.dev_attr);
+ return err;
+
+error:
+ aem_remove_sensors(data);
+ return err;
+}
+
+/* sysfs support functions for AEM2 sensors */
+
+/* Display temperature use */
+static ssize_t aem2_show_temp(struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct aem_data *a = dev_get_drvdata(dev);
+ a->update(a);
+
+ return sprintf(buf, "%u\n", a->temp[attr->index] * 1000);
+}
+
+/* Display power-capping registers */
+static ssize_t aem2_show_pcap_value(struct device *dev,
+ struct device_attribute *devattr,
+ char *buf)
+{
+ struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+ struct aem_data *a = dev_get_drvdata(dev);
+ a->update(a);
+
+ return sprintf(buf, "%u\n", a->pcap[attr->index] * 100000);
+}
+
+/* Remove sensors attached to an AEM device */
+static void aem_remove_sensors(struct aem_data *data)
+{
+ int i;
+
+ for (i = 0; i < AEM_NUM_SENSORS; i++) {
+ if (!data->sensors[i].dev_attr.attr.name)
+ continue;
+ device_remove_file(&data->pdev->dev,
+ &data->sensors[i].dev_attr);
+ }
+
+ device_remove_file(&data->pdev->dev,
+ &sensor_dev_attr_name.dev_attr);
+ device_remove_file(&data->pdev->dev,
+ &sensor_dev_attr_version.dev_attr);
+}
+
+/* Sensor probe functions */
+
+/* Description of AEM1 sensors */
+static struct aem_ro_sensor_template aem1_ro_sensors[] = {
+{"energy1_input", aem_show_energy, 0},
+{"power1_average", aem_show_power, 0},
+{NULL, NULL, 0},
+};
+
+static struct aem_rw_sensor_template aem1_rw_sensors[] = {
+{"power1_average_interval", aem_show_power_period, aem_set_power_period, 0},
+{NULL, NULL, NULL, 0},
+};
+
+/* Description of AEM2 sensors */
+static struct aem_ro_sensor_template aem2_ro_sensors[] = {
+{"energy1_input", aem_show_energy, 0},
+{"energy2_input", aem_show_energy, 1},
+{"power1_average", aem_show_power, 0},
+{"power2_average", aem_show_power, 1},
+{"temp1_input", aem2_show_temp, 0},
+{"temp2_input", aem2_show_temp, 1},
+
+{"power4_average", aem2_show_pcap_value, POWER_CAP_MAX_HOTPLUG},
+{"power5_average", aem2_show_pcap_value, POWER_CAP_MAX},
+{"power6_average", aem2_show_pcap_value, POWER_CAP_MIN_WARNING},
+{"power7_average", aem2_show_pcap_value, POWER_CAP_MIN},
+
+{"power3_average", aem2_show_pcap_value, POWER_AUX},
+{"power_cap", aem2_show_pcap_value, POWER_CAP},
+{NULL, NULL, 0},
+};
+
+static struct aem_rw_sensor_template aem2_rw_sensors[] = {
+{"power1_average_interval", aem_show_power_period, aem_set_power_period, 0},
+{"power2_average_interval", aem_show_power_period, aem_set_power_period, 1},
+{NULL, NULL, NULL, 0},
+};
+
+/* Set up AEM1 sensor attrs */
+static int aem1_find_sensors(struct aem_data *data)
+{
+ return aem_register_sensors(data, aem1_ro_sensors, aem1_rw_sensors);
+}
+
+/* Set up AEM2 sensor attrs */
+static int aem2_find_sensors(struct aem_data *data)
+{
+ return aem_register_sensors(data, aem2_ro_sensors, aem2_rw_sensors);
+}
+
+/* Module init/exit routines */
+
+static int __init aem_init(void)
+{
+ int res;
+
+ res = driver_register(&aem_driver);
+ if (res) {
+ printk(KERN_ERR "Can't register aem driver\n");
+ return res;
+ }
+
+ res = ipmi_smi_watcher_register(&driver_data.bmc_events);
+ if (res)
+ goto ipmi_reg_err;
+ return 0;
+
+ipmi_reg_err:
+ driver_unregister(&aem_driver);
+ return res;
+
+}
+
+static void __exit aem_exit(void)
+{
+ struct aem_data *p1, *next1;
+
+ ipmi_smi_watcher_unregister(&driver_data.bmc_events);
+ driver_unregister(&aem_driver);
+ list_for_each_entry_safe(p1, next1, &driver_data.aem_devices, list)
+ aem_delete(p1);
+}
+
+MODULE_AUTHOR("Darrick J. Wong <djwong@us.ibm.com>");
+MODULE_DESCRIPTION("IBM Active Energy Manager power/temp sensor driver");
+MODULE_LICENSE("GPL");
+
+module_init(aem_init);
+module_exit(aem_exit);
diff --git a/drivers/i2c/busses/i2c-amd756.c b/drivers/i2c/busses/i2c-amd756.c
index 2fa4318..43508d6 100644
--- a/drivers/i2c/busses/i2c-amd756.c
+++ b/drivers/i2c/busses/i2c-amd756.c
@@ -290,7 +290,7 @@
{
return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
- I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_PROC_CALL;
+ I2C_FUNC_SMBUS_BLOCK_DATA;
}
static const struct i2c_algorithm smbus_algorithm = {
diff --git a/drivers/i2c/busses/i2c-au1550.c b/drivers/i2c/busses/i2c-au1550.c
index 491718f..cae9dc8 100644
--- a/drivers/i2c/busses/i2c-au1550.c
+++ b/drivers/i2c/busses/i2c-au1550.c
@@ -335,7 +335,7 @@
goto out_mem;
}
- priv->psc_base = r->start;
+ priv->psc_base = CKSEG1ADDR(r->start);
priv->xfer_timeout = 200;
priv->ack_timeout = 200;
diff --git a/drivers/i2c/busses/i2c-nforce2.c b/drivers/i2c/busses/i2c-nforce2.c
index 3dac920..43c9f8d 100644
--- a/drivers/i2c/busses/i2c-nforce2.c
+++ b/drivers/i2c/busses/i2c-nforce2.c
@@ -50,6 +50,7 @@
#include <linux/init.h>
#include <linux/i2c.h>
#include <linux/delay.h>
+#include <linux/dmi.h>
#include <asm/io.h>
MODULE_LICENSE("GPL");
@@ -109,6 +110,18 @@
/* Misc definitions */
#define MAX_TIMEOUT 100
+/* We disable the second SMBus channel on these boards */
+static struct dmi_system_id __devinitdata nforce2_dmi_blacklist2[] = {
+ {
+ .ident = "DFI Lanparty NF4 Expert",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "DFI Corp,LTD"),
+ DMI_MATCH(DMI_BOARD_NAME, "LP UT NF4 Expert"),
+ },
+ },
+ { }
+};
+
static struct pci_driver nforce2_driver;
static void nforce2_abort(struct i2c_adapter *adap)
@@ -367,10 +380,17 @@
smbuses[0].base = 0; /* to have a check value */
}
/* SMBus adapter 2 */
- res2 = nforce2_probe_smb(dev, 5, NFORCE_PCI_SMB2, &smbuses[1], "SMB2");
- if (res2 < 0) {
- dev_err(&dev->dev, "Error probing SMB2.\n");
- smbuses[1].base = 0; /* to have a check value */
+ if (dmi_check_system(nforce2_dmi_blacklist2)) {
+ dev_err(&dev->dev, "Disabling SMB2 for safety reasons.\n");
+ res2 = -EPERM;
+ smbuses[1].base = 0;
+ } else {
+ res2 = nforce2_probe_smb(dev, 5, NFORCE_PCI_SMB2, &smbuses[1],
+ "SMB2");
+ if (res2 < 0) {
+ dev_err(&dev->dev, "Error probing SMB2.\n");
+ smbuses[1].base = 0; /* to have a check value */
+ }
}
if ((res1 < 0) && (res2 < 0)) {
/* we did not find even one of the SMBuses, so we give up */
diff --git a/drivers/i2c/chips/max6875.c b/drivers/i2c/chips/max6875.c
index fb7ea56..cf507b3 100644
--- a/drivers/i2c/chips/max6875.c
+++ b/drivers/i2c/chips/max6875.c
@@ -207,9 +207,6 @@
fake_client->flags = 0;
strlcpy(fake_client->name, "max6875 subclient", I2C_NAME_SIZE);
- /* Prevent 24RF08 corruption (in case of user error) */
- i2c_smbus_write_quick(real_client, 0);
-
if ((err = i2c_attach_client(real_client)) != 0)
goto exit_kfree2;
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index c99ebea..d0175f4 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -74,10 +74,7 @@
if (driver->id_table)
return i2c_match_id(driver->id_table, client) != NULL;
- /* new style drivers use the same kind of driver matching policy
- * as platform devices or SPI: compare device and driver IDs.
- */
- return strcmp(client->driver_name, drv->name) == 0;
+ return 0;
}
#ifdef CONFIG_HOTPLUG
@@ -91,14 +88,9 @@
if (dev->driver)
return 0;
- if (client->driver_name[0]) {
- if (add_uevent_var(env, "MODALIAS=%s", client->driver_name))
- return -ENOMEM;
- } else {
- if (add_uevent_var(env, "MODALIAS=%s%s",
- I2C_MODULE_PREFIX, client->name))
- return -ENOMEM;
- }
+ if (add_uevent_var(env, "MODALIAS=%s%s",
+ I2C_MODULE_PREFIX, client->name))
+ return -ENOMEM;
dev_dbg(dev, "uevent\n");
return 0;
}
@@ -206,9 +198,7 @@
static ssize_t show_modalias(struct device *dev, struct device_attribute *attr, char *buf)
{
struct i2c_client *client = to_i2c_client(dev);
- return client->driver_name[0]
- ? sprintf(buf, "%s\n", client->driver_name)
- : sprintf(buf, "%s%s\n", I2C_MODULE_PREFIX, client->name);
+ return sprintf(buf, "%s%s\n", I2C_MODULE_PREFIX, client->name);
}
static struct device_attribute i2c_dev_attrs[] = {
@@ -282,8 +272,6 @@
client->addr = info->addr;
client->irq = info->irq;
- strlcpy(client->driver_name, info->driver_name,
- sizeof(client->driver_name));
strlcpy(client->name, info->type, sizeof(client->name));
/* a new style driver may be bound to this device when we
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
index f702f91..1607536 100644
--- a/drivers/ide/Kconfig
+++ b/drivers/ide/Kconfig
@@ -1,8 +1,6 @@
#
# IDE ATA ATAPI Block device driver configuration
#
-# Andre Hedrick <andre@linux-ide.org>
-#
# Select HAVE_IDE if IDE is supported
config HAVE_IDE
@@ -335,7 +333,7 @@
This driver will work automatically in PCI based systems (most new
systems have PCI slots). But if your system uses VESA local bus
(VLB) instead of PCI, you must also supply a kernel boot parameter
- to enable the CMD640 bugfix/support: "ide0=cmd640_vlb". (Try "man
+ to enable the CMD640 bugfix/support: "cmd640.probe_vlb". (Try "man
bootparam" or see the documentation of your boot loader about how to
pass options to the kernel.)
@@ -457,27 +455,11 @@
onboard chipsets. It also tests for Simplex mode and enables
normal dual channel support.
- If you say Y here, you also need to say Y to "Use DMA by default
- when available", above. Please read the comments at the top of
+ Please read the comments at the top of
<file:drivers/ide/pci/alim15x3.c>.
If unsure, say N.
-config WDC_ALI15X3
- bool "ALI M15x3 WDC support (DANGEROUS)"
- depends on BLK_DEV_ALI15X3
- ---help---
- This allows for UltraDMA support for WDC drives that ignore CRC
- checking. You are a fool for enabling this option, but there have
- been requests. DO NOT COMPLAIN IF YOUR DRIVE HAS FS CORRUPTION, IF
- YOU ENABLE THIS! No one will listen, just laugh for ignoring this
- SERIOUS WARNING.
-
- Using this option can allow WDC drives to run at ATA-4/5 transfer
- rates with only an ATA-2 support structure.
-
- SAY N!
-
config BLK_DEV_AMD74XX
tristate "AMD and nVidia IDE support"
depends on !ARM
@@ -520,9 +502,6 @@
This driver adds detection and support for the CY82C693 chipset
used on Digital's PC-Alpha 164SX boards.
- If you say Y here, you need to say Y to "Use DMA by default
- when available" as well.
-
config BLK_DEV_CS5520
tristate "Cyrix CS5510/20 MediaGX chipset support (VERY EXPERIMENTAL)"
depends on EXPERIMENTAL
@@ -613,13 +592,12 @@
National SCx200 series of embedded x86 "Geode" systems.
config BLK_DEV_PIIX
- tristate "Intel PIIXn chipsets support"
+ tristate "Intel PIIX/ICH chipsets support"
select BLK_DEV_IDEDMA_PCI
help
- This driver adds explicit support for Intel PIIX and ICH chips
- and also for the Efar Victory66 (slc90e66) chip. This allows
- the kernel to change PIO, DMA and UDMA speeds and to configure
- the chip to optimum performance.
+ This driver adds explicit support for Intel PIIX and ICH chips.
+ This allows the kernel to change PIO, DMA and UDMA speeds and to
+ configure the chip to optimum performance.
config BLK_DEV_IT8213
tristate "IT8213 IDE support"
@@ -657,11 +635,7 @@
happen if the BIOS revisions of all installed cards (three-max) do
not match, the driver attempts to do dynamic tuning of the chipset
at boot-time for max-speed. Ultra33 BIOS 1.25 or newer is required
- for more than one card. This card may require that you say Y to
- "Special UDMA Feature".
-
- If you say Y here, you need to say Y to "Use DMA by default when
- available" as well.
+ for more than one card.
Please read the comments at the top of
<file:drivers/ide/pci/pdc202xx_old.c>.
@@ -710,9 +684,6 @@
ATA100: SiS635, SiS645, SiS650, SiS730, SiS735, SiS740,
SiS745, SiS750
- If you say Y here, you need to say Y to "Use DMA by default when
- available" as well.
-
Please read the comments at the top of <file:drivers/ide/pci/sis5513.c>.
config BLK_DEV_SL82C105
@@ -734,9 +705,6 @@
and it will handle timing cycles. Since this is an improved
look-a-like to the PIIX4 it should be a nice addition.
- If you say Y here, you need to say Y to "Use DMA by default when
- available" as well.
-
Please read the comments at the top of
<file:drivers/ide/pci/slc90e66.c>.
@@ -888,17 +856,17 @@
bool "Amiga IDE Doubler support (EXPERIMENTAL)"
depends on BLK_DEV_GAYLE && EXPERIMENTAL
---help---
- This driver provides support for the so-called `IDE doublers' (made
+ This feature provides support for the so-called `IDE doublers' (made
by various manufacturers, e.g. Eyetech) that can be connected to
the on-board IDE interface of some Amiga models. Using such an IDE
doubler, you can connect up to four instead of two IDE devices to
the Amiga's on-board IDE interface.
Note that the normal Amiga Gayle IDE driver may not work correctly
- if you have an IDE doubler and don't enable this driver!
+ if you have an IDE doubler and don't enable this feature!
- Say Y if you have an IDE doubler. The driver is enabled at kernel
- runtime using the "ide=doubler" kernel boot parameter.
+ Say Y if you have an IDE doubler. The feature is enabled at kernel
+ runtime using the "gayle.doubler" kernel boot parameter.
config BLK_DEV_BUDDHA
tristate "Buddha/Catweasel/X-Surf IDE interface support (EXPERIMENTAL)"
@@ -1060,6 +1028,7 @@
config BLK_DEV_HD_ONLY
bool "Old hard disk (MFM/RLL/IDE) driver"
+ depends on !ARM || ARCH_RPC || ARCH_SHARK || BROKEN
help
There are two drivers for MFM/RLL/IDE hard disks. Most people use
the newer enhanced driver, but this old one is still around for two
diff --git a/drivers/ide/arm/bast-ide.c b/drivers/ide/arm/bast-ide.c
index 713cef2..8e8c281 100644
--- a/drivers/ide/arm/bast-ide.c
+++ b/drivers/ide/arm/bast-ide.c
@@ -42,6 +42,7 @@
hw.io_ports.ctl_addr = aux + (6 * 0x20);
hw.irq = irq;
+ hw.chipset = ide_generic;
hwif = ide_find_port();
if (hwif == NULL)
diff --git a/drivers/ide/arm/ide_arm.c b/drivers/ide/arm/ide_arm.c
index 4263ffd..2f311da 100644
--- a/drivers/ide/arm/ide_arm.c
+++ b/drivers/ide/arm/ide_arm.c
@@ -49,6 +49,7 @@
memset(&hw, 0, sizeof(hw));
ide_std_init_ports(&hw, base, ctl);
hw.irq = IDE_ARM_IRQ;
+ hw.chipset = ide_generic;
hwif = ide_find_port();
if (hwif) {
diff --git a/drivers/ide/arm/palm_bk3710.c b/drivers/ide/arm/palm_bk3710.c
index 96378eb..d024ac8 100644
--- a/drivers/ide/arm/palm_bk3710.c
+++ b/drivers/ide/arm/palm_bk3710.c
@@ -409,9 +409,6 @@
ide_device_add(idx, &palm_bk3710_port_info);
- if (!hwif->present)
- goto out;
-
return 0;
out:
printk(KERN_WARNING "Palm Chip BK3710 IDE Register Fail\n");
diff --git a/drivers/ide/ide-generic.c b/drivers/ide/ide-generic.c
index a6073e2..2d92214 100644
--- a/drivers/ide/ide-generic.c
+++ b/drivers/ide/ide-generic.c
@@ -22,6 +22,10 @@
#define DRV_NAME "ide_generic"
+static int probe_mask = 0x03;
+module_param(probe_mask, int, 0);
+MODULE_PARM_DESC(probe_mask, "probe mask for legacy ISA IDE ports");
+
static ssize_t store_add(struct class *cls, const char *buf, size_t n)
{
ide_hwif_t *hwif;
@@ -89,6 +93,9 @@
u8 idx[MAX_HWIFS];
int i;
+ printk(KERN_INFO DRV_NAME ": please use \"probe_mask=0x3f\" module "
+ "parameter for probing all legacy ISA IDE ports\n");
+
for (i = 0; i < MAX_HWIFS; i++) {
ide_hwif_t *hwif;
unsigned long io_addr = ide_default_io_base(i);
@@ -96,7 +103,7 @@
idx[i] = 0xff;
- if (io_addr) {
+ if ((probe_mask & (1 << i)) && io_addr) {
if (!request_region(io_addr, 8, DRV_NAME)) {
printk(KERN_ERR "%s: I/O resource 0x%lX-0x%lX "
"not free.\n",
@@ -125,6 +132,7 @@
memset(&hw, 0, sizeof(hw));
ide_std_init_ports(&hw, io_addr, io_addr + 0x206);
hw.irq = ide_default_irq(io_addr);
+ hw.chipset = ide_generic;
ide_init_port_hw(hwif, &hw);
idx[i] = i;
diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c
index 57d9a9a..0daf923 100644
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -95,7 +95,7 @@
hwif->OUTB(drive->select.all, hwif->io_ports.device_addr);
}
-void SELECT_MASK (ide_drive_t *drive, int mask)
+static void SELECT_MASK(ide_drive_t *drive, int mask)
{
const struct ide_port_ops *port_ops = drive->hwif->port_ops;
diff --git a/drivers/ide/ide-pnp.c b/drivers/ide/ide-pnp.c
index 6a8953f..adbd017 100644
--- a/drivers/ide/ide-pnp.c
+++ b/drivers/ide/ide-pnp.c
@@ -55,6 +55,7 @@
memset(&hw, 0, sizeof(hw));
ide_std_init_ports(&hw, base, ctl);
hw.irq = pnp_irq(dev, 0);
+ hw.chipset = ide_generic;
hwif = ide_find_port();
if (hwif) {
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index 34b0d4f..380fa0c 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -648,13 +648,12 @@
get_device(&hwif->gendev);
- hwif->portdev = device_create(ide_port_class, &hwif->gendev,
- MKDEV(0, 0), hwif->name);
+ hwif->portdev = device_create_drvdata(ide_port_class, &hwif->gendev,
+ MKDEV(0, 0), hwif, hwif->name);
if (IS_ERR(hwif->portdev)) {
ret = PTR_ERR(hwif->portdev);
device_unregister(&hwif->gendev);
}
- dev_set_drvdata(hwif->portdev, hwif);
out:
return ret;
}
@@ -1334,8 +1333,7 @@
static void ide_init_port(ide_hwif_t *hwif, unsigned int port,
const struct ide_port_info *d)
{
- if (d->chipset != ide_etrax100)
- hwif->channel = port;
+ hwif->channel = port;
if (d->chipset)
hwif->chipset = d->chipset;
@@ -1520,7 +1518,7 @@
continue;
}
- if (d->chipset != ide_etrax100 && (i & 1) && mate) {
+ if ((i & 1) && mate) {
hwif->mate = mate;
mate->mate = hwif;
}
@@ -1666,6 +1664,7 @@
ide_std_init_ports(hw, base, ctl);
hw->irq = irq;
+ hw->chipset = d->chipset;
hwif = ide_find_port_slot(d);
if (hwif) {
diff --git a/drivers/ide/ide-proc.c b/drivers/ide/ide-proc.c
index 8d6ad81..55ec7f7 100644
--- a/drivers/ide/ide-proc.c
+++ b/drivers/ide/ide-proc.c
@@ -63,7 +63,6 @@
case ide_pmac: name = "mac-io"; break;
case ide_au1xxx: name = "au1xxx"; break;
case ide_palm3710: name = "palm3710"; break;
- case ide_etrax100: name = "etrax100"; break;
case ide_acorn: name = "acorn"; break;
default: name = "(unknown)"; break;
}
diff --git a/drivers/ide/legacy/buddha.c b/drivers/ide/legacy/buddha.c
index 5c730e4..9a1d27e 100644
--- a/drivers/ide/legacy/buddha.c
+++ b/drivers/ide/legacy/buddha.c
@@ -138,6 +138,8 @@
hw->irq = IRQ_AMIGA_PORTS;
hw->ack_intr = ack_intr;
+
+ hw->chipset = ide_generic;
}
/*
diff --git a/drivers/ide/legacy/falconide.c b/drivers/ide/legacy/falconide.c
index 9e449a0..af11028 100644
--- a/drivers/ide/legacy/falconide.c
+++ b/drivers/ide/legacy/falconide.c
@@ -81,6 +81,8 @@
hw->irq = IRQ_MFP_IDE;
hw->ack_intr = NULL;
+
+ hw->chipset = ide_generic;
}
/*
diff --git a/drivers/ide/legacy/gayle.c b/drivers/ide/legacy/gayle.c
index a9c2593..fed7d81 100644
--- a/drivers/ide/legacy/gayle.c
+++ b/drivers/ide/legacy/gayle.c
@@ -16,6 +16,7 @@
#include <linux/ide.h>
#include <linux/init.h>
#include <linux/zorro.h>
+#include <linux/module.h>
#include <asm/setup.h>
#include <asm/amigahw.h>
@@ -62,7 +63,10 @@
GAYLE_NUM_HWIFS-1)
#define GAYLE_HAS_CONTROL_REG (!ide_doubler)
#define GAYLE_IDEREG_SIZE (ide_doubler ? 0x1000 : 0x2000)
+
int ide_doubler = 0; /* support IDE doublers? */
+EXPORT_SYMBOL_GPL(ide_doubler);
+
module_param_named(doubler, ide_doubler, bool, 0);
MODULE_PARM_DESC(doubler, "enable support for IDE doublers");
#endif /* CONFIG_BLK_DEV_IDEDOUBLER */
@@ -112,6 +116,8 @@
hw->irq = IRQ_AMIGA_PORTS;
hw->ack_intr = ack_intr;
+
+ hw->chipset = ide_generic;
}
/*
diff --git a/drivers/ide/legacy/ide-cs.c b/drivers/ide/legacy/ide-cs.c
index aa2ea3d..f633b6b 100644
--- a/drivers/ide/legacy/ide-cs.c
+++ b/drivers/ide/legacy/ide-cs.c
@@ -135,13 +135,17 @@
{
ide_info_t *info = link->priv;
ide_hwif_t *hwif = info->hwif;
+ unsigned long data_addr, ctl_addr;
DEBUG(0, "ide_detach(0x%p)\n", link);
+ data_addr = hwif->io_ports.data_addr;
+ ctl_addr = hwif->io_ports.ctl_addr;
+
ide_release(link);
- release_region(hwif->io_ports.ctl_addr, 1);
- release_region(hwif->io_ports.data_addr, 8);
+ release_region(ctl_addr, 1);
+ release_region(data_addr, 8);
kfree(info);
} /* ide_detach */
@@ -194,6 +198,16 @@
if (hwif->present)
return hwif;
+ /* retry registration in case device is still spinning up */
+ for (i = 0; i < 10; i++) {
+ msleep(100);
+ ide_port_scan(hwif);
+ if (hwif->present)
+ return hwif;
+ }
+
+ return hwif;
+
out_release:
release_region(ctl, 1);
release_region(io, 8);
@@ -222,7 +236,7 @@
cistpl_cftable_entry_t dflt;
} *stk = NULL;
cistpl_cftable_entry_t *cfg;
- int i, pass, last_ret = 0, last_fn = 0, is_kme = 0;
+ int pass, last_ret = 0, last_fn = 0, is_kme = 0;
unsigned long io_base, ctl_base;
ide_hwif_t *hwif;
@@ -319,30 +333,15 @@
if (is_kme)
outb(0x81, ctl_base+1);
- /* retry registration in case device is still spinning up */
- for (i = 0; i < 10; i++) {
- hwif = idecs_register(io_base, ctl_base, link->irq.AssignedIRQ, link);
- if (hwif)
- break;
- if (link->io.NumPorts1 == 0x20) {
+ hwif = idecs_register(io_base, ctl_base, link->irq.AssignedIRQ, link);
+ if (hwif == NULL && link->io.NumPorts1 == 0x20) {
outb(0x02, ctl_base + 0x10);
hwif = idecs_register(io_base + 0x10, ctl_base + 0x10,
link->irq.AssignedIRQ, link);
- if (hwif) {
- io_base += 0x10;
- ctl_base += 0x10;
- break;
- }
- }
- msleep(100);
}
- if (hwif == NULL) {
- printk(KERN_NOTICE "ide-cs: ide_register() at 0x%3lx & 0x%3lx"
- ", irq %u failed\n", io_base, ctl_base,
- link->irq.AssignedIRQ);
+ if (hwif == NULL)
goto failed;
- }
info->ndev = 1;
sprintf(info->node.dev_name, "hd%c", 'a' + hwif->index * 2);
diff --git a/drivers/ide/legacy/macide.c b/drivers/ide/legacy/macide.c
index 1f527bb..2e84290 100644
--- a/drivers/ide/legacy/macide.c
+++ b/drivers/ide/legacy/macide.c
@@ -78,6 +78,8 @@
hw->irq = irq;
hw->ack_intr = ack_intr;
+
+ hw->chipset = ide_generic;
}
static const char *mac_ide_name[] =
@@ -95,6 +97,9 @@
int irq;
hw_regs_t hw;
+ if (!MACH_IS_MAC)
+ return -ENODEV;
+
switch (macintosh_config->ide_type) {
case MAC_IDE_QUADRA:
base = IDE_BASE;
diff --git a/drivers/ide/legacy/q40ide.c b/drivers/ide/legacy/q40ide.c
index 6f535d0..8ff6e2d 100644
--- a/drivers/ide/legacy/q40ide.c
+++ b/drivers/ide/legacy/q40ide.c
@@ -70,6 +70,8 @@
hw->irq = irq;
hw->ack_intr = ack_intr;
+
+ hw->chipset = ide_generic;
}
static void q40ide_input_data(ide_drive_t *drive, struct request *rq,
diff --git a/drivers/ide/mips/swarm.c b/drivers/ide/mips/swarm.c
index 712d17b..52fee3d 100644
--- a/drivers/ide/mips/swarm.c
+++ b/drivers/ide/mips/swarm.c
@@ -4,7 +4,7 @@
* Author: Manish Lachwani, mlachwani@mvista.com
* Copyright (C) 2004 MIPS Technologies, Inc. All rights reserved.
* Author: Maciej W. Rozycki <macro@mips.com>
- * Copyright (c) 2006 Maciej W. Rozycki
+ * Copyright (c) 2006, 2008 Maciej W. Rozycki
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
@@ -70,8 +70,9 @@
ide_hwif_t *hwif;
u8 __iomem *base;
phys_t offset, size;
+ hw_regs_t hw;
int i;
- u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
+ u8 idx[] = { 0xff, 0xff, 0xff, 0xff };
if (!SIBYTE_HAVE_IDE)
return -ENODEV;
@@ -112,14 +113,15 @@
hwif->host_flags = IDE_HFLAG_MMIO;
default_hwif_mmiops(hwif);
- hwif->chipset = ide_generic;
-
for (i = 0; i <= 7; i++)
- hwif->io_ports_array[i] =
+ hw.io_ports_array[i] =
(unsigned long)(base + ((0x1f0 + i) << 5));
- hwif->io_ports.ctl_addr =
+ hw.io_ports.ctl_addr =
(unsigned long)(base + (0x3f6 << 5));
- hwif->irq = K_INT_GB_IDE;
+ hw.irq = K_INT_GB_IDE;
+ hw.chipset = ide_generic;
+
+ ide_init_port_hw(hwif, &hw);
idx[0] = hwif->index;
diff --git a/drivers/ide/pci/alim15x3.c b/drivers/ide/pci/alim15x3.c
index c1922f9..f2129d5 100644
--- a/drivers/ide/pci/alim15x3.c
+++ b/drivers/ide/pci/alim15x3.c
@@ -39,6 +39,16 @@
#include <asm/io.h>
/*
+ * Allow UDMA on M1543C-E chipset for WDC disks that ignore CRC checking
+ * (this is DANGEROUS and could result in data corruption).
+ */
+static int wdc_udma;
+
+module_param(wdc_udma, bool, 0);
+MODULE_PARM_DESC(wdc_udma,
+ "allow UDMA on M1543C-E chipset for WDC disks (DANGEROUS)");
+
+/*
* ALi devices are not plug in. Otherwise these static values would
* need to go. They ought to go away anyway
*/
@@ -76,11 +86,6 @@
a_clc = 0;
c_time = ide_pio_timings[pio].cycle_time;
-#if 0
- if ((r_clc = ((c_time - s_time - a_time) * bus_speed + 999) / 1000) >= 16)
- r_clc = 0;
-#endif
-
if (!(r_clc = (c_time * bus_speed + 999) / 1000 - a_clc - s_clc)) {
r_clc = 1;
} else {
@@ -110,16 +115,6 @@
pci_write_config_byte(dev, port, s_clc);
pci_write_config_byte(dev, port+drive->select.b.unit+2, (a_clc << 4) | r_clc);
local_irq_restore(flags);
-
- /*
- * setup active rec
- * { 70, 165, 365 }, PIO Mode 0
- * { 50, 125, 208 }, PIO Mode 1
- * { 30, 100, 110 }, PIO Mode 2
- * { 30, 80, 70 }, PIO Mode 3 with IORDY
- * { 25, 70, 25 }, PIO Mode 4 with IORDY ns
- * { 20, 50, 30 } PIO Mode 5 with IORDY (nonstandard)
- */
}
/**
@@ -131,9 +126,7 @@
* The actual rules for the ALi are:
* No UDMA on revisions <= 0x20
* Disk only for revisions < 0xC2
- * Not WDC drives for revisions < 0xC2
- *
- * FIXME: WDC ifdef needs to die
+ * Not WDC drives on M1543C-E (?)
*/
static u8 ali_udma_filter(ide_drive_t *drive)
@@ -141,10 +134,9 @@
if (m5229_revision > 0x20 && m5229_revision < 0xC2) {
if (drive->media != ide_disk)
return 0;
-#ifndef CONFIG_WDC_ALI15X3
- if (chip_is_1543c_e && strstr(drive->id->model, "WDC "))
+ if (chip_is_1543c_e && strstr(drive->id->model, "WDC ") &&
+ wdc_udma == 0)
return 0;
-#endif
}
return drive->hwif->ultra_mask;
@@ -537,17 +529,9 @@
static int __devinit alim15x3_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
- static struct pci_device_id ati_rs100[] = {
- { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS100) },
- { },
- };
-
struct ide_port_info d = ali15x3_chipset;
u8 rev = dev->revision, idx = id->driver_data;
- if (pci_dev_present(ati_rs100))
- printk(KERN_WARNING "alim15x3: ATI Radeon IGP Northbridge is not yet fully tested.\n");
-
/* don't use LBA48 DMA on ALi devices before rev 0xC5 */
if (rev <= 0xC4)
d.host_flags |= IDE_HFLAG_NO_LBA48_DMA;
diff --git a/drivers/ide/pci/cmd640.c b/drivers/ide/pci/cmd640.c
index aaf3810..b38a1980 100644
--- a/drivers/ide/pci/cmd640.c
+++ b/drivers/ide/pci/cmd640.c
@@ -747,9 +747,11 @@
ide_std_init_ports(&hw[0], 0x1f0, 0x3f6);
hw[0].irq = 14;
+ hw[0].chipset = ide_cmd640;
ide_std_init_ports(&hw[1], 0x170, 0x376);
hw[1].irq = 15;
+ hw[1].chipset = ide_cmd640;
printk(KERN_INFO "cmd640: buggy cmd640%c interface on %s, config=0x%02x"
"\n", 'a' + cmd640_chip_version - 1, bus_type, cfr);
diff --git a/drivers/ide/pci/cs5520.c b/drivers/ide/pci/cs5520.c
index 17669a4..992b1cf 100644
--- a/drivers/ide/pci/cs5520.c
+++ b/drivers/ide/pci/cs5520.c
@@ -119,6 +119,7 @@
.dma_timeout = ide_dma_timeout,
};
+/* FIXME: VDMA is disabled because it caused system hangs */
#define DECLARE_CS_DEV(name_str) \
{ \
.name = name_str, \
@@ -126,7 +127,6 @@
.dma_ops = &cs5520_dma_ops, \
.host_flags = IDE_HFLAG_ISA_PORTS | \
IDE_HFLAG_CS5520 | \
- IDE_HFLAG_VDMA | \
IDE_HFLAG_NO_ATAPI_DMA | \
IDE_HFLAG_ABUSE_SET_DMA_MODE, \
.pio_mask = ATA_PIO4, \
diff --git a/drivers/ide/pci/delkin_cb.c b/drivers/ide/pci/delkin_cb.c
index b9e4579..af0f300 100644
--- a/drivers/ide/pci/delkin_cb.c
+++ b/drivers/ide/pci/delkin_cb.c
@@ -47,13 +47,18 @@
.quirkproc = ide_undecoded_slave,
};
+static const struct ide_port_info delkin_cb_port_info = {
+ .port_ops = &delkin_cb_port_ops,
+ .host_flags = IDE_HFLAG_IO_32BIT | IDE_HFLAG_UNMASK_IRQS |
+ IDE_HFLAG_NO_DMA,
+};
+
static int __devinit
delkin_cb_probe (struct pci_dev *dev, const struct pci_device_id *id)
{
unsigned long base;
hw_regs_t hw;
ide_hwif_t *hwif = NULL;
- ide_drive_t *drive;
int i, rc;
u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
@@ -79,6 +84,7 @@
memset(&hw, 0, sizeof(hw));
ide_std_init_ports(&hw, base + 0x10, base + 0x1e);
hw.irq = dev->irq;
+ hw.dev = &dev->dev;
hw.chipset = ide_pci; /* this enables IRQ sharing */
hwif = ide_find_port();
@@ -89,26 +95,16 @@
ide_init_port_data(hwif, i);
ide_init_port_hw(hwif, &hw);
- hwif->port_ops = &delkin_cb_port_ops;
idx[0] = i;
- ide_device_add(idx, NULL);
-
- if (!hwif->present)
- goto out_disable;
+ ide_device_add(idx, &delkin_cb_port_info);
pci_set_drvdata(dev, hwif);
- hwif->dev = &dev->dev;
- drive = &hwif->drives[0];
- if (drive->present) {
- drive->io_32bit = 1;
- drive->unmask = 1;
- }
+
return 0;
out_disable:
- printk(KERN_ERR "delkin_cb: no IDE devices found\n");
pci_release_regions(dev);
pci_disable_device(dev);
return -ENODEV;
@@ -139,14 +135,12 @@
.remove = delkin_cb_remove,
};
-static int
-delkin_cb_init (void)
+static int __init delkin_cb_init(void)
{
return pci_register_driver(&driver);
}
-static void
-delkin_cb_exit (void)
+static void __exit delkin_cb_exit(void)
{
pci_unregister_driver(&driver);
}
diff --git a/drivers/ide/pci/opti621.c b/drivers/ide/pci/opti621.c
index 6e99080..725c805 100644
--- a/drivers/ide/pci/opti621.c
+++ b/drivers/ide/pci/opti621.c
@@ -81,8 +81,6 @@
* 0.5 doesn't work.
*/
-#define OPTI621_DEBUG /* define for debug messages */
-
#include <linux/types.h>
#include <linux/module.h>
#include <linux/kernel.h>
@@ -92,28 +90,6 @@
#include <asm/io.h>
-//#define OPTI621_MAX_PIO 3
-/* In fact, I do not have any PIO 4 drive
- * (address: 25 ns, data: 70 ns, recovery: 35 ns),
- * but OPTi 82C621 is programmable and it can do (minimal values):
- * on 40MHz PCI bus (pulse 25 ns):
- * address: 25 ns, data: 25 ns, recovery: 50 ns;
- * on 20MHz PCI bus (pulse 50 ns):
- * address: 50 ns, data: 50 ns, recovery: 100 ns.
- */
-
-/* #define READ_PREFETCH 0 */
-/* Uncomment for disable read prefetch.
- * There is some readprefetch capatibility in hdparm,
- * but when I type hdparm -P 1 /dev/hda, I got errors
- * and till reset drive is inaccessible.
- * This (hw) read prefetch is safe on my drive.
- */
-
-#ifndef READ_PREFETCH
-#define READ_PREFETCH 0x40 /* read prefetch is enabled */
-#endif /* else read prefetch is disabled */
-
#define READ_REG 0 /* index of Read cycle timing register */
#define WRITE_REG 1 /* index of Write cycle timing register */
#define CNTRL_REG 3 /* index of Control register */
@@ -122,51 +98,8 @@
static int reg_base;
-#define PIO_NOT_EXIST 254
-#define PIO_DONT_KNOW 255
-
static DEFINE_SPINLOCK(opti621_lock);
-/* there are stored pio numbers from other calls of opti621_set_pio_mode */
-static void compute_pios(ide_drive_t *drive, const u8 pio)
-/* Store values into drive->drive_data
- * second_contr - 0 for primary controller, 1 for secondary
- * slave_drive - 0 -> pio is for master, 1 -> pio is for slave
- * pio - PIO mode for selected drive (for other we don't know)
- */
-{
- int d;
- ide_hwif_t *hwif = HWIF(drive);
-
- drive->drive_data = pio;
-
- for (d = 0; d < 2; ++d) {
- drive = &hwif->drives[d];
- if (drive->present) {
- if (drive->drive_data == PIO_DONT_KNOW)
- drive->drive_data = ide_get_best_pio_mode(drive, 255, 3);
-#ifdef OPTI621_DEBUG
- printk("%s: Selected PIO mode %d\n",
- drive->name, drive->drive_data);
-#endif
- } else {
- drive->drive_data = PIO_NOT_EXIST;
- }
- }
-}
-
-static int cmpt_clk(int time, int bus_speed)
-/* Returns (rounded up) time in clocks for time in ns,
- * with bus_speed in MHz.
- * Example: bus_speed = 40 MHz, time = 80 ns
- * 1000/40 = 25 ns (clk value),
- * 80/25 = 3.2, rounded up to 4 (I hope ;-)).
- * Use idebus=xx to select right frequency.
- */
-{
- return ((time*bus_speed+999)/1000);
-}
-
/* Write value to register reg, base of register
* is at reg_base (0x1f0 primary, 0x170 secondary,
* if not changed by PCI configuration).
@@ -199,83 +132,29 @@
return ret;
}
-typedef struct pio_clocks_s {
- int address_time; /* Address setup (clocks) */
- int data_time; /* Active/data pulse (clocks) */
- int recovery_time; /* Recovery time (clocks) */
-} pio_clocks_t;
-
-static void compute_clocks(int pio, pio_clocks_t *clks)
-{
- if (pio != PIO_NOT_EXIST) {
- int adr_setup, data_pls;
- int bus_speed = ide_pci_clk ? ide_pci_clk : system_bus_clock();
-
- adr_setup = ide_pio_timings[pio].setup_time;
- data_pls = ide_pio_timings[pio].active_time;
- clks->address_time = cmpt_clk(adr_setup, bus_speed);
- clks->data_time = cmpt_clk(data_pls, bus_speed);
- clks->recovery_time = cmpt_clk(ide_pio_timings[pio].cycle_time
- - adr_setup-data_pls, bus_speed);
- if (clks->address_time < 1)
- clks->address_time = 1;
- if (clks->address_time > 4)
- clks->address_time = 4;
- if (clks->data_time < 1)
- clks->data_time = 1;
- if (clks->data_time > 16)
- clks->data_time = 16;
- if (clks->recovery_time < 2)
- clks->recovery_time = 2;
- if (clks->recovery_time > 17)
- clks->recovery_time = 17;
- } else {
- clks->address_time = 1;
- clks->data_time = 1;
- clks->recovery_time = 2;
- /* minimal values */
- }
-}
-
static void opti621_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
- /* primary and secondary drives share some registers,
- * so we have to program both drives
- */
+ ide_hwif_t *hwif = drive->hwif;
+ ide_drive_t *pair = ide_get_paired_drive(drive);
unsigned long flags;
- u8 pio1 = 0, pio2 = 0;
- pio_clocks_t first, second;
- int ax, drdy;
- u8 cycle1, cycle2, misc;
- ide_hwif_t *hwif = HWIF(drive);
+ u8 tim, misc, addr_pio = pio, clk;
- /* sets drive->drive_data for both drives */
- compute_pios(drive, pio);
- pio1 = hwif->drives[0].drive_data;
- pio2 = hwif->drives[1].drive_data;
+ /* DRDY is default 2 (by OPTi Databook) */
+ static const u8 addr_timings[2][5] = {
+ { 0x20, 0x10, 0x00, 0x00, 0x00 }, /* 33 MHz */
+ { 0x10, 0x10, 0x00, 0x00, 0x00 }, /* 25 MHz */
+ };
+ static const u8 data_rec_timings[2][5] = {
+ { 0x5b, 0x45, 0x32, 0x21, 0x20 }, /* 33 MHz */
+ { 0x48, 0x34, 0x21, 0x10, 0x10 } /* 25 MHz */
+ };
- compute_clocks(pio1, &first);
- compute_clocks(pio2, &second);
+ drive->drive_data = XFER_PIO_0 + pio;
- /* ax = max(a1,a2) */
- ax = (first.address_time < second.address_time) ? second.address_time : first.address_time;
-
- drdy = 2; /* DRDY is default 2 (by OPTi Databook) */
-
- cycle1 = ((first.data_time-1)<<4) | (first.recovery_time-2);
- cycle2 = ((second.data_time-1)<<4) | (second.recovery_time-2);
- misc = READ_PREFETCH | ((ax-1)<<4) | ((drdy-2)<<1);
-
-#ifdef OPTI621_DEBUG
- printk("%s: master: address: %d, data: %d, "
- "recovery: %d, drdy: %d [clk]\n",
- hwif->name, ax, first.data_time,
- first.recovery_time, drdy);
- printk("%s: slave: address: %d, data: %d, "
- "recovery: %d, drdy: %d [clk]\n",
- hwif->name, ax, second.data_time,
- second.recovery_time, drdy);
-#endif
+ if (pair->present) {
+ if (pair->drive_data && pair->drive_data < drive->drive_data)
+ addr_pio = pair->drive_data - XFER_PIO_0;
+ }
spin_lock_irqsave(&opti621_lock, flags);
@@ -289,24 +168,21 @@
(void)inb(reg_base + CNTRL_REG);
/* if reads 0xc0, no interface exist? */
read_reg(CNTRL_REG);
- /* read version, probably 0 */
- read_reg(STRAP_REG);
- /* program primary drive */
- /* select Index-0 for Register-A */
- write_reg(0, MISC_REG);
- /* set read cycle timings */
- write_reg(cycle1, READ_REG);
- /* set write cycle timings */
- write_reg(cycle1, WRITE_REG);
+ /* check CLK speed */
+ clk = read_reg(STRAP_REG) & 1;
- /* program secondary drive */
- /* select Index-1 for Register-B */
- write_reg(1, MISC_REG);
+ printk(KERN_INFO "%s: CLK = %d MHz\n", hwif->name, clk ? 25 : 33);
+
+ tim = data_rec_timings[clk][pio];
+ misc = addr_timings[clk][addr_pio];
+
+ /* select Index-0/1 for Register-A/B */
+ write_reg(drive->select.b.unit, MISC_REG);
/* set read cycle timings */
- write_reg(cycle2, READ_REG);
+ write_reg(tim, READ_REG);
/* set write cycle timings */
- write_reg(cycle2, WRITE_REG);
+ write_reg(tim, WRITE_REG);
/* use Register-A for drive 0 */
/* use Register-B for drive 1 */
@@ -319,45 +195,26 @@
spin_unlock_irqrestore(&opti621_lock, flags);
}
-static void __devinit opti621_port_init_devs(ide_hwif_t *hwif)
-{
- hwif->drives[0].drive_data = PIO_DONT_KNOW;
- hwif->drives[1].drive_data = PIO_DONT_KNOW;
-}
-
static const struct ide_port_ops opti621_port_ops = {
- .port_init_devs = opti621_port_init_devs,
.set_pio_mode = opti621_set_pio_mode,
};
-static const struct ide_port_info opti621_chipsets[] __devinitdata = {
- { /* 0 */
- .name = "OPTI621",
- .enablebits = { {0x45, 0x80, 0x00}, {0x40, 0x08, 0x00} },
- .port_ops = &opti621_port_ops,
- .host_flags = IDE_HFLAG_TRUST_BIOS_FOR_DMA,
- .pio_mask = ATA_PIO3,
- .swdma_mask = ATA_SWDMA2,
- .mwdma_mask = ATA_MWDMA2,
- }, { /* 1 */
- .name = "OPTI621X",
- .enablebits = { {0x45, 0x80, 0x00}, {0x40, 0x08, 0x00} },
- .port_ops = &opti621_port_ops,
- .host_flags = IDE_HFLAG_TRUST_BIOS_FOR_DMA,
- .pio_mask = ATA_PIO3,
- .swdma_mask = ATA_SWDMA2,
- .mwdma_mask = ATA_MWDMA2,
- }
+static const struct ide_port_info opti621_chipset __devinitdata = {
+ .name = "OPTI621/X",
+ .enablebits = { {0x45, 0x80, 0x00}, {0x40, 0x08, 0x00} },
+ .port_ops = &opti621_port_ops,
+ .host_flags = IDE_HFLAG_NO_DMA,
+ .pio_mask = ATA_PIO4,
};
static int __devinit opti621_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
- return ide_setup_pci_device(dev, &opti621_chipsets[id->driver_data]);
+ return ide_setup_pci_device(dev, &opti621_chipset);
}
static const struct pci_device_id opti621_pci_tbl[] = {
{ PCI_VDEVICE(OPTI, PCI_DEVICE_ID_OPTI_82C621), 0 },
- { PCI_VDEVICE(OPTI, PCI_DEVICE_ID_OPTI_82C825), 1 },
+ { PCI_VDEVICE(OPTI, PCI_DEVICE_ID_OPTI_82C825), 0 },
{ 0, },
};
MODULE_DEVICE_TABLE(pci, opti621_pci_tbl);
diff --git a/drivers/ide/pci/sis5513.c b/drivers/ide/pci/sis5513.c
index 4b0b85d..e127eb2 100644
--- a/drivers/ide/pci/sis5513.c
+++ b/drivers/ide/pci/sis5513.c
@@ -569,6 +569,11 @@
{
struct ide_port_info d = sis5513_chipset;
u8 udma_rates[] = { 0x00, 0x00, 0x07, 0x1f, 0x3f, 0x3f, 0x7f, 0x7f };
+ int rc;
+
+ rc = pci_enable_device(dev);
+ if (rc)
+ return rc;
if (sis_find_family(dev) == 0)
return -ENOTSUPP;
diff --git a/drivers/ide/ppc/mpc8xx.c b/drivers/ide/ppc/mpc8xx.c
index f0e638d..236f9c3 100644
--- a/drivers/ide/ppc/mpc8xx.c
+++ b/drivers/ide/ppc/mpc8xx.c
@@ -303,6 +303,8 @@
pcmp->pcmc_per = 0x100000 >> (16 * _slot_);
#endif /* CONFIG_IDE_8xx_PCCARD */
+ hw->chipset = ide_generic;
+
return 0;
}
#endif /* CONFIG_IDE_8xx_PCCARD || CONFIG_IDE_8xx_DIRECT */
@@ -377,6 +379,8 @@
((immap_t *) IMAP_ADDR)->im_siu_conf.sc_siel |=
(0x80000000 >> ioport_dsc[data_port].irq);
+ hw->chipset = ide_generic;
+
return 0;
}
#endif /* CONFIG_IDE_8xx_DIRECT */
diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c
index 48aa019..ba2d587 100644
--- a/drivers/ide/ppc/pmac.c
+++ b/drivers/ide/ppc/pmac.c
@@ -59,7 +59,6 @@
int irq;
int kind;
int aapl_bus_id;
- unsigned cable_80 : 1;
unsigned mediabay : 1;
unsigned broken_dma : 1;
unsigned broken_dma_warn : 1;
@@ -918,10 +917,40 @@
return 0;
}
+static u8 pmac_ide_cable_detect(ide_hwif_t *hwif)
+{
+ pmac_ide_hwif_t *pmif = (pmac_ide_hwif_t *)ide_get_hwifdata(hwif);
+ struct device_node *np = pmif->node;
+ const char *cable = of_get_property(np, "cable-type", NULL);
+
+ /* Get cable type from device-tree. */
+ if (cable && !strncmp(cable, "80-", 3))
+ return ATA_CBL_PATA80;
+
+ /*
+ * G5's seem to have incorrect cable type in device-tree.
+ * Let's assume they have a 80 conductor cable, this seem
+ * to be always the case unless the user mucked around.
+ */
+ if (of_device_is_compatible(np, "K2-UATA") ||
+ of_device_is_compatible(np, "shasta-ata"))
+ return ATA_CBL_PATA80;
+
+ return ATA_CBL_PATA40;
+}
+
static const struct ide_port_ops pmac_ide_ata6_port_ops = {
.set_pio_mode = pmac_ide_set_pio_mode,
.set_dma_mode = pmac_ide_set_dma_mode,
.selectproc = pmac_ide_kauai_selectproc,
+ .cable_detect = pmac_ide_cable_detect,
+};
+
+static const struct ide_port_ops pmac_ide_ata4_port_ops = {
+ .set_pio_mode = pmac_ide_set_pio_mode,
+ .set_dma_mode = pmac_ide_set_dma_mode,
+ .selectproc = pmac_ide_selectproc,
+ .cable_detect = pmac_ide_cable_detect,
};
static const struct ide_port_ops pmac_ide_port_ops = {
@@ -949,10 +978,7 @@
/*
* Setup, register & probe an IDE channel driven by this driver, this is
- * called by one of the 2 probe functions (macio or PCI). Note that a channel
- * that ends up beeing free of any device is not kept around by this driver
- * (it is kept in 2.4). This introduce an interface numbering change on some
- * rare machines unfortunately, but it's better this way.
+ * called by one of the 2 probe functions (macio or PCI).
*/
static int __devinit
pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif, hw_regs_t *hw)
@@ -962,7 +988,6 @@
u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
struct ide_port_info d = pmac_port_info;
- pmif->cable_80 = 0;
pmif->broken_dma = pmif->broken_dma_warn = 0;
if (of_device_is_compatible(np, "shasta-ata")) {
pmif->kind = controller_sh_ata6;
@@ -979,6 +1004,7 @@
} else if (of_device_is_compatible(np, "keylargo-ata")) {
if (strcmp(np->name, "ata-4") == 0) {
pmif->kind = controller_kl_ata4;
+ d.port_ops = &pmac_ide_ata4_port_ops;
d.udma_mask = ATA_UDMA4;
} else
pmif->kind = controller_kl_ata3;
@@ -992,22 +1018,6 @@
bidp = of_get_property(np, "AAPL,bus-id", NULL);
pmif->aapl_bus_id = bidp ? *bidp : 0;
- /* Get cable type from device-tree */
- if (pmif->kind == controller_kl_ata4 || pmif->kind == controller_un_ata6
- || pmif->kind == controller_k2_ata6
- || pmif->kind == controller_sh_ata6) {
- const char* cable = of_get_property(np, "cable-type", NULL);
- if (cable && !strncmp(cable, "80-", 3))
- pmif->cable_80 = 1;
- }
- /* G5's seem to have incorrect cable type in device-tree. Let's assume
- * they have a 80 conductor cable, this seem to be always the case unless
- * the user mucked around
- */
- if (of_device_is_compatible(np, "K2-UATA") ||
- of_device_is_compatible(np, "shasta-ata"))
- pmif->cable_80 = 1;
-
/* On Kauai-type controllers, we make sure the FCR is correct */
if (pmif->kauai_fcr)
writel(KAUAI_FCR_UATA_MAGIC |
@@ -1053,7 +1063,6 @@
hwif->hwif_data = pmif;
ide_init_port_hw(hwif, hw);
- hwif->cbl = pmif->cable_80 ? ATA_CBL_PATA80 : ATA_CBL_PATA40;
printk(KERN_INFO "ide%d: Found Apple %s controller, bus ID %d%s, irq %d\n",
hwif->index, model_name[pmif->kind], pmif->aapl_bus_id,
@@ -1070,11 +1079,6 @@
}
}
-#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC
- if (pmif->cable_80 == 0)
- d.udma_mask &= ATA_UDMA2;
-#endif
-
idx[0] = hwif->index;
ide_device_add(idx, &d);
diff --git a/drivers/ieee1394/sbp2.c b/drivers/ieee1394/sbp2.c
index 16b9d0a..a5ceff2 100644
--- a/drivers/ieee1394/sbp2.c
+++ b/drivers/ieee1394/sbp2.c
@@ -1539,15 +1539,13 @@
static void sbp2_create_command_orb(struct sbp2_lu *lu,
struct sbp2_command_info *cmd,
- unchar *scsi_cmd,
- unsigned int scsi_use_sg,
- unsigned int scsi_request_bufflen,
- struct scatterlist *sg,
- enum dma_data_direction dma_dir)
+ struct scsi_cmnd *SCpnt)
{
struct sbp2_fwhost_info *hi = lu->hi;
struct sbp2_command_orb *orb = &cmd->command_orb;
u32 orb_direction;
+ unsigned int scsi_request_bufflen = scsi_bufflen(SCpnt);
+ enum dma_data_direction dma_dir = SCpnt->sc_data_direction;
/*
* Set-up our command ORB.
@@ -1580,13 +1578,14 @@
orb->data_descriptor_lo = 0x0;
orb->misc |= ORB_SET_DIRECTION(1);
} else
- sbp2_prep_command_orb_sg(orb, hi, cmd, scsi_use_sg, sg,
+ sbp2_prep_command_orb_sg(orb, hi, cmd, scsi_sg_count(SCpnt),
+ scsi_sglist(SCpnt),
orb_direction, dma_dir);
sbp2util_cpu_to_be32_buffer(orb, sizeof(*orb));
- memset(orb->cdb, 0, 12);
- memcpy(orb->cdb, scsi_cmd, COMMAND_SIZE(*scsi_cmd));
+ memset(orb->cdb, 0, sizeof(orb->cdb));
+ memcpy(orb->cdb, SCpnt->cmnd, SCpnt->cmd_len);
}
static void sbp2_link_orb_command(struct sbp2_lu *lu,
@@ -1669,16 +1668,13 @@
static int sbp2_send_command(struct sbp2_lu *lu, struct scsi_cmnd *SCpnt,
void (*done)(struct scsi_cmnd *))
{
- unchar *scsi_cmd = (unchar *)SCpnt->cmnd;
struct sbp2_command_info *cmd;
cmd = sbp2util_allocate_command_orb(lu, SCpnt, done);
if (!cmd)
return -EIO;
- sbp2_create_command_orb(lu, cmd, scsi_cmd, scsi_sg_count(SCpnt),
- scsi_bufflen(SCpnt), scsi_sglist(SCpnt),
- SCpnt->sc_data_direction);
+ sbp2_create_command_orb(lu, cmd, SCpnt);
sbp2_link_orb_command(lu, cmd);
return 0;
diff --git a/drivers/infiniband/core/mad.c b/drivers/infiniband/core/mad.c
index fbe16d5..1adf2ef 100644
--- a/drivers/infiniband/core/mad.c
+++ b/drivers/infiniband/core/mad.c
@@ -747,7 +747,9 @@
break;
case IB_MAD_RESULT_SUCCESS | IB_MAD_RESULT_CONSUMED:
kmem_cache_free(ib_mad_cache, mad_priv);
- break;
+ kfree(local);
+ ret = 1;
+ goto out;
case IB_MAD_RESULT_SUCCESS:
/* Treat like an incoming receive MAD */
port_priv = ib_get_mad_port(mad_agent_priv->agent.device,
diff --git a/drivers/infiniband/core/umem.c b/drivers/infiniband/core/umem.c
index fe78f7d..a1768db 100644
--- a/drivers/infiniband/core/umem.c
+++ b/drivers/infiniband/core/umem.c
@@ -150,7 +150,7 @@
ret = 0;
while (npages) {
ret = get_user_pages(current, current->mm, cur_base,
- min_t(int, npages,
+ min_t(unsigned long, npages,
PAGE_SIZE / sizeof (struct page *)),
1, !umem->writable, page_list, vma_list);
diff --git a/drivers/infiniband/core/user_mad.c b/drivers/infiniband/core/user_mad.c
index 3aa2db5..840ede9 100644
--- a/drivers/infiniband/core/user_mad.c
+++ b/drivers/infiniband/core/user_mad.c
@@ -1005,8 +1005,9 @@
if (cdev_add(port->cdev, base_dev + port->dev_num, 1))
goto err_cdev;
- port->dev = device_create(umad_class, device->dma_device,
- port->cdev->dev, "umad%d", port->dev_num);
+ port->dev = device_create_drvdata(umad_class, device->dma_device,
+ port->cdev->dev, port,
+ "umad%d", port->dev_num);
if (IS_ERR(port->dev))
goto err_cdev;
@@ -1024,15 +1025,12 @@
if (cdev_add(port->sm_cdev, base_dev + port->dev_num + IB_UMAD_MAX_PORTS, 1))
goto err_sm_cdev;
- port->sm_dev = device_create(umad_class, device->dma_device,
- port->sm_cdev->dev,
- "issm%d", port->dev_num);
+ port->sm_dev = device_create_drvdata(umad_class, device->dma_device,
+ port->sm_cdev->dev, port,
+ "issm%d", port->dev_num);
if (IS_ERR(port->sm_dev))
goto err_sm_cdev;
- dev_set_drvdata(port->dev, port);
- dev_set_drvdata(port->sm_dev, port);
-
if (device_create_file(port->sm_dev, &dev_attr_ibdev))
goto err_sm_dev;
if (device_create_file(port->sm_dev, &dev_attr_port))
diff --git a/drivers/infiniband/core/uverbs_main.c b/drivers/infiniband/core/uverbs_main.c
index cc1afa2..f806da1 100644
--- a/drivers/infiniband/core/uverbs_main.c
+++ b/drivers/infiniband/core/uverbs_main.c
@@ -755,14 +755,15 @@
if (cdev_add(uverbs_dev->cdev, IB_UVERBS_BASE_DEV + uverbs_dev->devnum, 1))
goto err_cdev;
- uverbs_dev->dev = device_create(uverbs_class, device->dma_device,
- uverbs_dev->cdev->dev,
- "uverbs%d", uverbs_dev->devnum);
+ uverbs_dev->dev = device_create_drvdata(uverbs_class,
+ device->dma_device,
+ uverbs_dev->cdev->dev,
+ uverbs_dev,
+ "uverbs%d",
+ uverbs_dev->devnum);
if (IS_ERR(uverbs_dev->dev))
goto err_cdev;
- dev_set_drvdata(uverbs_dev->dev, uverbs_dev);
-
if (device_create_file(uverbs_dev->dev, &dev_attr_ibdev))
goto err_class;
if (device_create_file(uverbs_dev->dev, &dev_attr_abi_version))
diff --git a/drivers/infiniband/hw/amso1100/c2_rnic.c b/drivers/infiniband/hw/amso1100/c2_rnic.c
index 9a054c6..b1441aeb 100644
--- a/drivers/infiniband/hw/amso1100/c2_rnic.c
+++ b/drivers/infiniband/hw/amso1100/c2_rnic.c
@@ -455,8 +455,7 @@
IB_DEVICE_CURR_QP_STATE_MOD |
IB_DEVICE_SYS_IMAGE_GUID |
IB_DEVICE_ZERO_STAG |
- IB_DEVICE_MEM_WINDOW |
- IB_DEVICE_SEND_W_INV);
+ IB_DEVICE_MEM_WINDOW);
/* Allocate the qptr_array */
c2dev->qptr_array = vmalloc(C2_MAX_CQS * sizeof(void *));
diff --git a/drivers/infiniband/hw/cxgb3/cxio_hal.c b/drivers/infiniband/hw/cxgb3/cxio_hal.c
index ebf9d30..3f441fc 100644
--- a/drivers/infiniband/hw/cxgb3/cxio_hal.c
+++ b/drivers/infiniband/hw/cxgb3/cxio_hal.c
@@ -405,11 +405,11 @@
struct t3_swsq *sqp = wq->sq + Q_PTR2IDX(wq->sq_rptr, wq->sq_size_log2);
ptr = wq->sq_rptr + count;
- sqp += count;
+ sqp = wq->sq + Q_PTR2IDX(ptr, wq->sq_size_log2);
while (ptr != wq->sq_wptr) {
insert_sq_cqe(wq, cq, sqp);
- sqp++;
ptr++;
+ sqp = wq->sq + Q_PTR2IDX(ptr, wq->sq_size_log2);
flushed++;
}
return flushed;
diff --git a/drivers/infiniband/hw/cxgb3/iwch_qp.c b/drivers/infiniband/hw/cxgb3/iwch_qp.c
index 79dbe5b..9926137 100644
--- a/drivers/infiniband/hw/cxgb3/iwch_qp.c
+++ b/drivers/infiniband/hw/cxgb3/iwch_qp.c
@@ -229,7 +229,7 @@
struct ib_send_wr **bad_wr)
{
int err = 0;
- u8 t3_wr_flit_cnt;
+ u8 uninitialized_var(t3_wr_flit_cnt);
enum t3_wr_opcode t3_wr_opcode = 0;
enum t3_wr_flags t3_wr_flags;
struct iwch_qp *qhp;
diff --git a/drivers/infiniband/hw/ehca/ehca_reqs.c b/drivers/infiniband/hw/ehca/ehca_reqs.c
index bbe0436..f093b00 100644
--- a/drivers/infiniband/hw/ehca/ehca_reqs.c
+++ b/drivers/infiniband/hw/ehca/ehca_reqs.c
@@ -421,8 +421,10 @@
int ret = 0;
unsigned long flags;
- if (unlikely(my_qp->state != IB_QPS_RTS)) {
- ehca_err(qp->device, "QP not in RTS state qpn=%x", qp->qp_num);
+ /* Reject WR if QP is in RESET, INIT or RTR state */
+ if (unlikely(my_qp->state < IB_QPS_RTS)) {
+ ehca_err(qp->device, "Invalid QP state qp_state=%d qpn=%x",
+ my_qp->state, qp->qp_num);
return -EINVAL;
}
diff --git a/drivers/infiniband/hw/ipath/ipath_driver.c b/drivers/infiniband/hw/ipath/ipath_driver.c
index ce7b7c3..daad09a 100644
--- a/drivers/infiniband/hw/ipath/ipath_driver.c
+++ b/drivers/infiniband/hw/ipath/ipath_driver.c
@@ -1894,7 +1894,7 @@
*/
if (dd->ipath_flags & IPATH_HAS_SEND_DMA) {
int skip_cancel;
- u64 *statp = &dd->ipath_sdma_status;
+ unsigned long *statp = &dd->ipath_sdma_status;
spin_lock_irqsave(&dd->ipath_sdma_lock, flags);
skip_cancel =
@@ -2616,7 +2616,7 @@
ipath_dbg("unit %u port %d is in use "
"(PID %u cmd %s), can't reset\n",
unit, i,
- dd->ipath_pd[i]->port_pid,
+ pid_nr(dd->ipath_pd[i]->port_pid),
dd->ipath_pd[i]->port_comm);
ret = -EBUSY;
goto bail;
@@ -2654,19 +2654,21 @@
static int ipath_signal_procs(struct ipath_devdata *dd, int sig)
{
int i, sub, any = 0;
- pid_t pid;
+ struct pid *pid;
if (!dd->ipath_pd)
return 0;
for (i = 1; i < dd->ipath_cfgports; i++) {
- if (!dd->ipath_pd[i] || !dd->ipath_pd[i]->port_cnt ||
- !dd->ipath_pd[i]->port_pid)
+ if (!dd->ipath_pd[i] || !dd->ipath_pd[i]->port_cnt)
continue;
pid = dd->ipath_pd[i]->port_pid;
+ if (!pid)
+ continue;
+
dev_info(&dd->pcidev->dev, "context %d in use "
"(PID %u), sending signal %d\n",
- i, pid, sig);
- kill_proc(pid, sig, 1);
+ i, pid_nr(pid), sig);
+ kill_pid(pid, sig, 1);
any++;
for (sub = 0; sub < INFINIPATH_MAX_SUBPORT; sub++) {
pid = dd->ipath_pd[i]->port_subpid[sub];
@@ -2674,8 +2676,8 @@
continue;
dev_info(&dd->pcidev->dev, "sub-context "
"%d:%d in use (PID %u), sending "
- "signal %d\n", i, sub, pid, sig);
- kill_proc(pid, sig, 1);
+ "signal %d\n", i, sub, pid_nr(pid), sig);
+ kill_pid(pid, sig, 1);
any++;
}
}
diff --git a/drivers/infiniband/hw/ipath/ipath_file_ops.c b/drivers/infiniband/hw/ipath/ipath_file_ops.c
index 3295177..b472b15 100644
--- a/drivers/infiniband/hw/ipath/ipath_file_ops.c
+++ b/drivers/infiniband/hw/ipath/ipath_file_ops.c
@@ -555,7 +555,7 @@
p = dd->ipath_pageshadow[porttid + tid];
dd->ipath_pageshadow[porttid + tid] = NULL;
ipath_cdbg(VERBOSE, "PID %u freeing TID %u\n",
- pd->port_pid, tid);
+ pid_nr(pd->port_pid), tid);
dd->ipath_f_put_tid(dd, &tidbase[tid],
RCVHQ_RCV_TYPE_EXPECTED,
dd->ipath_tidinvalid);
@@ -1609,7 +1609,7 @@
port);
pd->port_cnt = 1;
port_fp(fp) = pd;
- pd->port_pid = current->pid;
+ pd->port_pid = get_pid(task_pid(current));
strncpy(pd->port_comm, current->comm, sizeof(pd->port_comm));
ipath_stats.sps_ports++;
ret = 0;
@@ -1793,14 +1793,15 @@
}
port_fp(fp) = pd;
subport_fp(fp) = pd->port_cnt++;
- pd->port_subpid[subport_fp(fp)] = current->pid;
+ pd->port_subpid[subport_fp(fp)] =
+ get_pid(task_pid(current));
tidcursor_fp(fp) = 0;
pd->active_slaves |= 1 << subport_fp(fp);
ipath_cdbg(PROC,
"%s[%u] %u sharing %s[%u] unit:port %u:%u\n",
current->comm, current->pid,
subport_fp(fp),
- pd->port_comm, pd->port_pid,
+ pd->port_comm, pid_nr(pd->port_pid),
dd->ipath_unit, pd->port_port);
ret = 1;
goto done;
@@ -2066,7 +2067,8 @@
* the slave(s) don't wait for receive data forever.
*/
pd->active_slaves &= ~(1 << fd->subport);
- pd->port_subpid[fd->subport] = 0;
+ put_pid(pd->port_subpid[fd->subport]);
+ pd->port_subpid[fd->subport] = NULL;
mutex_unlock(&ipath_mutex);
goto bail;
}
@@ -2074,7 +2076,7 @@
if (pd->port_hdrqfull) {
ipath_cdbg(PROC, "%s[%u] had %u rcvhdrqfull errors "
- "during run\n", pd->port_comm, pd->port_pid,
+ "during run\n", pd->port_comm, pid_nr(pd->port_pid),
pd->port_hdrqfull);
pd->port_hdrqfull = 0;
}
@@ -2134,11 +2136,12 @@
unlock_expected_tids(pd);
ipath_stats.sps_ports--;
ipath_cdbg(PROC, "%s[%u] closed port %u:%u\n",
- pd->port_comm, pd->port_pid,
+ pd->port_comm, pid_nr(pd->port_pid),
dd->ipath_unit, port);
}
- pd->port_pid = 0;
+ put_pid(pd->port_pid);
+ pd->port_pid = NULL;
dd->ipath_pd[pd->port_port] = NULL; /* before releasing mutex */
mutex_unlock(&ipath_mutex);
ipath_free_pddata(dd, pd); /* after releasing the mutex */
diff --git a/drivers/infiniband/hw/ipath/ipath_kernel.h b/drivers/infiniband/hw/ipath/ipath_kernel.h
index 02b24a3..0bd8bcb 100644
--- a/drivers/infiniband/hw/ipath/ipath_kernel.h
+++ b/drivers/infiniband/hw/ipath/ipath_kernel.h
@@ -159,8 +159,8 @@
/* saved total number of polled urgent packets for poll edge trigger */
u32 port_urgent_poll;
/* pid of process using this port */
- pid_t port_pid;
- pid_t port_subpid[INFINIPATH_MAX_SUBPORT];
+ struct pid *port_pid;
+ struct pid *port_subpid[INFINIPATH_MAX_SUBPORT];
/* same size as task_struct .comm[] */
char port_comm[16];
/* pkeys set by this use of this port */
@@ -232,6 +232,11 @@
#define IPATH_SDMA_TXREQ_S_ABORTED 2
#define IPATH_SDMA_TXREQ_S_SHUTDOWN 3
+#define IPATH_SDMA_STATUS_SCORE_BOARD_DRAIN_IN_PROG (1ull << 63)
+#define IPATH_SDMA_STATUS_ABORT_IN_PROG (1ull << 62)
+#define IPATH_SDMA_STATUS_INTERNAL_SDMA_ENABLE (1ull << 61)
+#define IPATH_SDMA_STATUS_SCB_EMPTY (1ull << 30)
+
/* max dwords in small buffer packet */
#define IPATH_SMALLBUF_DWORDS (dd->ipath_piosize2k >> 2)
@@ -483,7 +488,7 @@
/* SendDMA related entries */
spinlock_t ipath_sdma_lock;
- u64 ipath_sdma_status;
+ unsigned long ipath_sdma_status;
unsigned long ipath_sdma_abort_jiffies;
unsigned long ipath_sdma_abort_intr_timeout;
unsigned long ipath_sdma_buf_jiffies;
@@ -822,8 +827,8 @@
#define IPATH_SDMA_DISARMED 1
#define IPATH_SDMA_DISABLED 2
#define IPATH_SDMA_LAYERBUF 3
-#define IPATH_SDMA_RUNNING 62
-#define IPATH_SDMA_SHUTDOWN 63
+#define IPATH_SDMA_RUNNING 30
+#define IPATH_SDMA_SHUTDOWN 31
/* bit combinations that correspond to abort states */
#define IPATH_SDMA_ABORT_NONE 0
diff --git a/drivers/infiniband/hw/ipath/ipath_mad.c b/drivers/infiniband/hw/ipath/ipath_mad.c
index 1ff46ae..5f9315d 100644
--- a/drivers/infiniband/hw/ipath/ipath_mad.c
+++ b/drivers/infiniband/hw/ipath/ipath_mad.c
@@ -1492,6 +1492,10 @@
goto bail;
}
+ case IB_MGMT_METHOD_TRAP:
+ case IB_MGMT_METHOD_REPORT:
+ case IB_MGMT_METHOD_REPORT_RESP:
+ case IB_MGMT_METHOD_TRAP_REPRESS:
case IB_MGMT_METHOD_GET_RESP:
/*
* The ib_mad module will call us to process responses
diff --git a/drivers/infiniband/hw/ipath/ipath_qp.c b/drivers/infiniband/hw/ipath/ipath_qp.c
index dd5b6e9..4715911 100644
--- a/drivers/infiniband/hw/ipath/ipath_qp.c
+++ b/drivers/infiniband/hw/ipath/ipath_qp.c
@@ -242,7 +242,6 @@
{
struct ipath_qp *q, **qpp;
unsigned long flags;
- int fnd = 0;
spin_lock_irqsave(&qpt->lock, flags);
@@ -253,51 +252,40 @@
*qpp = qp->next;
qp->next = NULL;
atomic_dec(&qp->refcount);
- fnd = 1;
break;
}
}
spin_unlock_irqrestore(&qpt->lock, flags);
-
- if (!fnd)
- return;
-
- free_qpn(qpt, qp->ibqp.qp_num);
-
- wait_event(qp->wait, !atomic_read(&qp->refcount));
}
/**
- * ipath_free_all_qps - remove all QPs from the table
+ * ipath_free_all_qps - check for QPs still in use
* @qpt: the QP table to empty
+ *
+ * There should not be any QPs still in use.
+ * Free memory for table.
*/
-void ipath_free_all_qps(struct ipath_qp_table *qpt)
+unsigned ipath_free_all_qps(struct ipath_qp_table *qpt)
{
unsigned long flags;
- struct ipath_qp *qp, *nqp;
- u32 n;
+ struct ipath_qp *qp;
+ u32 n, qp_inuse = 0;
+ spin_lock_irqsave(&qpt->lock, flags);
for (n = 0; n < qpt->max; n++) {
- spin_lock_irqsave(&qpt->lock, flags);
qp = qpt->table[n];
qpt->table[n] = NULL;
- spin_unlock_irqrestore(&qpt->lock, flags);
- while (qp) {
- nqp = qp->next;
- free_qpn(qpt, qp->ibqp.qp_num);
- if (!atomic_dec_and_test(&qp->refcount) ||
- !ipath_destroy_qp(&qp->ibqp))
- ipath_dbg("QP memory leak!\n");
- qp = nqp;
- }
+ for (; qp; qp = qp->next)
+ qp_inuse++;
}
+ spin_unlock_irqrestore(&qpt->lock, flags);
- for (n = 0; n < ARRAY_SIZE(qpt->map); n++) {
+ for (n = 0; n < ARRAY_SIZE(qpt->map); n++)
if (qpt->map[n].page)
- free_page((unsigned long)qpt->map[n].page);
- }
+ free_page((unsigned long) qpt->map[n].page);
+ return qp_inuse;
}
/**
@@ -336,11 +324,12 @@
qp->remote_qpn = 0;
qp->qkey = 0;
qp->qp_access_flags = 0;
- qp->s_busy = 0;
+ atomic_set(&qp->s_dma_busy, 0);
qp->s_flags &= IPATH_S_SIGNAL_REQ_WR;
qp->s_hdrwords = 0;
qp->s_wqe = NULL;
qp->s_pkt_delay = 0;
+ qp->s_draining = 0;
qp->s_psn = 0;
qp->r_psn = 0;
qp->r_msn = 0;
@@ -353,7 +342,8 @@
}
qp->s_ack_state = IB_OPCODE_RC_ACKNOWLEDGE;
qp->r_nak_state = 0;
- qp->r_wrid_valid = 0;
+ qp->r_aflags = 0;
+ qp->r_flags = 0;
qp->s_rnr_timeout = 0;
qp->s_head = 0;
qp->s_tail = 0;
@@ -361,7 +351,6 @@
qp->s_last = 0;
qp->s_ssn = 1;
qp->s_lsn = 0;
- qp->s_wait_credit = 0;
memset(qp->s_ack_queue, 0, sizeof(qp->s_ack_queue));
qp->r_head_ack_queue = 0;
qp->s_tail_ack_queue = 0;
@@ -370,17 +359,17 @@
qp->r_rq.wq->head = 0;
qp->r_rq.wq->tail = 0;
}
- qp->r_reuse_sge = 0;
}
/**
- * ipath_error_qp - put a QP into an error state
- * @qp: the QP to put into an error state
+ * ipath_error_qp - put a QP into the error state
+ * @qp: the QP to put into the error state
* @err: the receive completion error to signal if a RWQE is active
*
* Flushes both send and receive work queues.
* Returns true if last WQE event should be generated.
* The QP s_lock should be held and interrupts disabled.
+ * If we are already in error state, just return.
*/
int ipath_error_qp(struct ipath_qp *qp, enum ib_wc_status err)
@@ -389,8 +378,10 @@
struct ib_wc wc;
int ret = 0;
- ipath_dbg("QP%d/%d in error state (%d)\n",
- qp->ibqp.qp_num, qp->remote_qpn, err);
+ if (qp->state == IB_QPS_ERR)
+ goto bail;
+
+ qp->state = IB_QPS_ERR;
spin_lock(&dev->pending_lock);
if (!list_empty(&qp->timerwait))
@@ -399,39 +390,21 @@
list_del_init(&qp->piowait);
spin_unlock(&dev->pending_lock);
- wc.vendor_err = 0;
- wc.byte_len = 0;
- wc.imm_data = 0;
+ /* Schedule the sending tasklet to drain the send work queue. */
+ if (qp->s_last != qp->s_head)
+ ipath_schedule_send(qp);
+
+ memset(&wc, 0, sizeof(wc));
wc.qp = &qp->ibqp;
- wc.src_qp = 0;
- wc.wc_flags = 0;
- wc.pkey_index = 0;
- wc.slid = 0;
- wc.sl = 0;
- wc.dlid_path_bits = 0;
- wc.port_num = 0;
- if (qp->r_wrid_valid) {
- qp->r_wrid_valid = 0;
+ wc.opcode = IB_WC_RECV;
+
+ if (test_and_clear_bit(IPATH_R_WRID_VALID, &qp->r_aflags)) {
wc.wr_id = qp->r_wr_id;
- wc.opcode = IB_WC_RECV;
wc.status = err;
ipath_cq_enter(to_icq(qp->ibqp.recv_cq), &wc, 1);
}
wc.status = IB_WC_WR_FLUSH_ERR;
- while (qp->s_last != qp->s_head) {
- struct ipath_swqe *wqe = get_swqe_ptr(qp, qp->s_last);
-
- wc.wr_id = wqe->wr.wr_id;
- wc.opcode = ib_ipath_wc_opcode[wqe->wr.opcode];
- if (++qp->s_last >= qp->s_size)
- qp->s_last = 0;
- ipath_cq_enter(to_icq(qp->ibqp.send_cq), &wc, 1);
- }
- qp->s_cur = qp->s_tail = qp->s_head;
- qp->s_hdrwords = 0;
- qp->s_ack_state = IB_OPCODE_RC_ACKNOWLEDGE;
-
if (qp->r_rq.wq) {
struct ipath_rwq *wq;
u32 head;
@@ -447,7 +420,6 @@
tail = wq->tail;
if (tail >= qp->r_rq.size)
tail = 0;
- wc.opcode = IB_WC_RECV;
while (tail != head) {
wc.wr_id = get_rwqe_ptr(&qp->r_rq, tail)->wr_id;
if (++tail >= qp->r_rq.size)
@@ -460,6 +432,7 @@
} else if (qp->ibqp.event_handler)
ret = 1;
+bail:
return ret;
}
@@ -478,11 +451,10 @@
struct ipath_ibdev *dev = to_idev(ibqp->device);
struct ipath_qp *qp = to_iqp(ibqp);
enum ib_qp_state cur_state, new_state;
- unsigned long flags;
int lastwqe = 0;
int ret;
- spin_lock_irqsave(&qp->s_lock, flags);
+ spin_lock_irq(&qp->s_lock);
cur_state = attr_mask & IB_QP_CUR_STATE ?
attr->cur_qp_state : qp->state;
@@ -535,16 +507,42 @@
switch (new_state) {
case IB_QPS_RESET:
+ if (qp->state != IB_QPS_RESET) {
+ qp->state = IB_QPS_RESET;
+ spin_lock(&dev->pending_lock);
+ if (!list_empty(&qp->timerwait))
+ list_del_init(&qp->timerwait);
+ if (!list_empty(&qp->piowait))
+ list_del_init(&qp->piowait);
+ spin_unlock(&dev->pending_lock);
+ qp->s_flags &= ~IPATH_S_ANY_WAIT;
+ spin_unlock_irq(&qp->s_lock);
+ /* Stop the sending tasklet */
+ tasklet_kill(&qp->s_task);
+ wait_event(qp->wait_dma, !atomic_read(&qp->s_dma_busy));
+ spin_lock_irq(&qp->s_lock);
+ }
ipath_reset_qp(qp, ibqp->qp_type);
break;
+ case IB_QPS_SQD:
+ qp->s_draining = qp->s_last != qp->s_cur;
+ qp->state = new_state;
+ break;
+
+ case IB_QPS_SQE:
+ if (qp->ibqp.qp_type == IB_QPT_RC)
+ goto inval;
+ qp->state = new_state;
+ break;
+
case IB_QPS_ERR:
lastwqe = ipath_error_qp(qp, IB_WC_WR_FLUSH_ERR);
break;
default:
+ qp->state = new_state;
break;
-
}
if (attr_mask & IB_QP_PKEY_INDEX)
@@ -597,8 +595,7 @@
if (attr_mask & IB_QP_MAX_QP_RD_ATOMIC)
qp->s_max_rd_atomic = attr->max_rd_atomic;
- qp->state = new_state;
- spin_unlock_irqrestore(&qp->s_lock, flags);
+ spin_unlock_irq(&qp->s_lock);
if (lastwqe) {
struct ib_event ev;
@@ -612,7 +609,7 @@
goto bail;
inval:
- spin_unlock_irqrestore(&qp->s_lock, flags);
+ spin_unlock_irq(&qp->s_lock);
ret = -EINVAL;
bail:
@@ -643,7 +640,7 @@
attr->pkey_index = qp->s_pkey_index;
attr->alt_pkey_index = 0;
attr->en_sqd_async_notify = 0;
- attr->sq_draining = 0;
+ attr->sq_draining = qp->s_draining;
attr->max_rd_atomic = qp->s_max_rd_atomic;
attr->max_dest_rd_atomic = qp->r_max_rd_atomic;
attr->min_rnr_timer = qp->r_min_rnr_timer;
@@ -833,6 +830,7 @@
spin_lock_init(&qp->r_rq.lock);
atomic_set(&qp->refcount, 0);
init_waitqueue_head(&qp->wait);
+ init_waitqueue_head(&qp->wait_dma);
tasklet_init(&qp->s_task, ipath_do_send, (unsigned long)qp);
INIT_LIST_HEAD(&qp->piowait);
INIT_LIST_HEAD(&qp->timerwait);
@@ -926,6 +924,7 @@
else
vfree(qp->r_rq.wq);
ipath_free_qp(&dev->qp_table, qp);
+ free_qpn(&dev->qp_table, qp->ibqp.qp_num);
bail_qp:
kfree(qp);
bail_swq:
@@ -947,41 +946,44 @@
{
struct ipath_qp *qp = to_iqp(ibqp);
struct ipath_ibdev *dev = to_idev(ibqp->device);
- unsigned long flags;
- spin_lock_irqsave(&qp->s_lock, flags);
- qp->state = IB_QPS_ERR;
- spin_unlock_irqrestore(&qp->s_lock, flags);
- spin_lock(&dev->n_qps_lock);
- dev->n_qps_allocated--;
- spin_unlock(&dev->n_qps_lock);
+ /* Make sure HW and driver activity is stopped. */
+ spin_lock_irq(&qp->s_lock);
+ if (qp->state != IB_QPS_RESET) {
+ qp->state = IB_QPS_RESET;
+ spin_lock(&dev->pending_lock);
+ if (!list_empty(&qp->timerwait))
+ list_del_init(&qp->timerwait);
+ if (!list_empty(&qp->piowait))
+ list_del_init(&qp->piowait);
+ spin_unlock(&dev->pending_lock);
+ qp->s_flags &= ~IPATH_S_ANY_WAIT;
+ spin_unlock_irq(&qp->s_lock);
+ /* Stop the sending tasklet */
+ tasklet_kill(&qp->s_task);
+ wait_event(qp->wait_dma, !atomic_read(&qp->s_dma_busy));
+ } else
+ spin_unlock_irq(&qp->s_lock);
- /* Stop the sending tasklet. */
- tasklet_kill(&qp->s_task);
+ ipath_free_qp(&dev->qp_table, qp);
if (qp->s_tx) {
atomic_dec(&qp->refcount);
if (qp->s_tx->txreq.flags & IPATH_SDMA_TXREQ_F_FREEBUF)
kfree(qp->s_tx->txreq.map_addr);
+ spin_lock_irq(&dev->pending_lock);
+ list_add(&qp->s_tx->txreq.list, &dev->txreq_free);
+ spin_unlock_irq(&dev->pending_lock);
+ qp->s_tx = NULL;
}
- /* Make sure the QP isn't on the timeout list. */
- spin_lock_irqsave(&dev->pending_lock, flags);
- if (!list_empty(&qp->timerwait))
- list_del_init(&qp->timerwait);
- if (!list_empty(&qp->piowait))
- list_del_init(&qp->piowait);
- if (qp->s_tx)
- list_add(&qp->s_tx->txreq.list, &dev->txreq_free);
- spin_unlock_irqrestore(&dev->pending_lock, flags);
+ wait_event(qp->wait, !atomic_read(&qp->refcount));
- /*
- * Make sure that the QP is not in the QPN table so receive
- * interrupts will discard packets for this QP. XXX Also remove QP
- * from multicast table.
- */
- if (atomic_read(&qp->refcount) != 0)
- ipath_free_qp(&dev->qp_table, qp);
+ /* all user's cleaned up, mark it available */
+ free_qpn(&dev->qp_table, qp->ibqp.qp_num);
+ spin_lock(&dev->n_qps_lock);
+ dev->n_qps_allocated--;
+ spin_unlock(&dev->n_qps_lock);
if (qp->ip)
kref_put(&qp->ip->ref, ipath_release_mmap_info);
@@ -1026,48 +1028,6 @@
}
/**
- * ipath_sqerror_qp - put a QP's send queue into an error state
- * @qp: QP who's send queue will be put into an error state
- * @wc: the WC responsible for putting the QP in this state
- *
- * Flushes the send work queue.
- * The QP s_lock should be held and interrupts disabled.
- */
-
-void ipath_sqerror_qp(struct ipath_qp *qp, struct ib_wc *wc)
-{
- struct ipath_ibdev *dev = to_idev(qp->ibqp.device);
- struct ipath_swqe *wqe = get_swqe_ptr(qp, qp->s_last);
-
- ipath_dbg("Send queue error on QP%d/%d: err: %d\n",
- qp->ibqp.qp_num, qp->remote_qpn, wc->status);
-
- spin_lock(&dev->pending_lock);
- if (!list_empty(&qp->timerwait))
- list_del_init(&qp->timerwait);
- if (!list_empty(&qp->piowait))
- list_del_init(&qp->piowait);
- spin_unlock(&dev->pending_lock);
-
- ipath_cq_enter(to_icq(qp->ibqp.send_cq), wc, 1);
- if (++qp->s_last >= qp->s_size)
- qp->s_last = 0;
-
- wc->status = IB_WC_WR_FLUSH_ERR;
-
- while (qp->s_last != qp->s_head) {
- wqe = get_swqe_ptr(qp, qp->s_last);
- wc->wr_id = wqe->wr.wr_id;
- wc->opcode = ib_ipath_wc_opcode[wqe->wr.opcode];
- ipath_cq_enter(to_icq(qp->ibqp.send_cq), wc, 1);
- if (++qp->s_last >= qp->s_size)
- qp->s_last = 0;
- }
- qp->s_cur = qp->s_tail = qp->s_head;
- qp->state = IB_QPS_SQE;
-}
-
-/**
* ipath_get_credit - flush the send work queue of a QP
* @qp: the qp who's send work queue to flush
* @aeth: the Acknowledge Extended Transport Header
@@ -1093,9 +1053,10 @@
}
/* Restart sending if it was blocked due to lack of credits. */
- if (qp->s_cur != qp->s_head &&
+ if ((qp->s_flags & IPATH_S_WAIT_SSN_CREDIT) &&
+ qp->s_cur != qp->s_head &&
(qp->s_lsn == (u32) -1 ||
ipath_cmp24(get_swqe_ptr(qp, qp->s_cur)->ssn,
qp->s_lsn + 1) <= 0))
- tasklet_hi_schedule(&qp->s_task);
+ ipath_schedule_send(qp);
}
diff --git a/drivers/infiniband/hw/ipath/ipath_rc.c b/drivers/infiniband/hw/ipath/ipath_rc.c
index 08b11b5..108df66 100644
--- a/drivers/infiniband/hw/ipath/ipath_rc.c
+++ b/drivers/infiniband/hw/ipath/ipath_rc.c
@@ -92,6 +92,10 @@
u32 bth0;
u32 bth2;
+ /* Don't send an ACK if we aren't supposed to. */
+ if (!(ib_ipath_state_ops[qp->state] & IPATH_PROCESS_RECV_OK))
+ goto bail;
+
/* header size in 32-bit words LRH+BTH = (8+12)/4. */
hwords = 5;
@@ -238,14 +242,25 @@
ipath_make_rc_ack(dev, qp, ohdr, pmtu))
goto done;
- if (!(ib_ipath_state_ops[qp->state] & IPATH_PROCESS_SEND_OK) ||
- qp->s_rnr_timeout || qp->s_wait_credit)
- goto bail;
+ if (!(ib_ipath_state_ops[qp->state] & IPATH_PROCESS_SEND_OK)) {
+ if (!(ib_ipath_state_ops[qp->state] & IPATH_FLUSH_SEND))
+ goto bail;
+ /* We are in the error state, flush the work request. */
+ if (qp->s_last == qp->s_head)
+ goto bail;
+ /* If DMAs are in progress, we can't flush immediately. */
+ if (atomic_read(&qp->s_dma_busy)) {
+ qp->s_flags |= IPATH_S_WAIT_DMA;
+ goto bail;
+ }
+ wqe = get_swqe_ptr(qp, qp->s_last);
+ ipath_send_complete(qp, wqe, IB_WC_WR_FLUSH_ERR);
+ goto done;
+ }
- /* Limit the number of packets sent without an ACK. */
- if (ipath_cmp24(qp->s_psn, qp->s_last_psn + IPATH_PSN_CREDIT) > 0) {
- qp->s_wait_credit = 1;
- dev->n_rc_stalls++;
+ /* Leave BUSY set until RNR timeout. */
+ if (qp->s_rnr_timeout) {
+ qp->s_flags |= IPATH_S_WAITING;
goto bail;
}
@@ -257,6 +272,9 @@
wqe = get_swqe_ptr(qp, qp->s_cur);
switch (qp->s_state) {
default:
+ if (!(ib_ipath_state_ops[qp->state] &
+ IPATH_PROCESS_NEXT_SEND_OK))
+ goto bail;
/*
* Resend an old request or start a new one.
*
@@ -294,8 +312,10 @@
case IB_WR_SEND_WITH_IMM:
/* If no credit, return. */
if (qp->s_lsn != (u32) -1 &&
- ipath_cmp24(wqe->ssn, qp->s_lsn + 1) > 0)
+ ipath_cmp24(wqe->ssn, qp->s_lsn + 1) > 0) {
+ qp->s_flags |= IPATH_S_WAIT_SSN_CREDIT;
goto bail;
+ }
wqe->lpsn = wqe->psn;
if (len > pmtu) {
wqe->lpsn += (len - 1) / pmtu;
@@ -325,8 +345,10 @@
case IB_WR_RDMA_WRITE_WITH_IMM:
/* If no credit, return. */
if (qp->s_lsn != (u32) -1 &&
- ipath_cmp24(wqe->ssn, qp->s_lsn + 1) > 0)
+ ipath_cmp24(wqe->ssn, qp->s_lsn + 1) > 0) {
+ qp->s_flags |= IPATH_S_WAIT_SSN_CREDIT;
goto bail;
+ }
ohdr->u.rc.reth.vaddr =
cpu_to_be64(wqe->wr.wr.rdma.remote_addr);
ohdr->u.rc.reth.rkey =
@@ -570,7 +592,11 @@
ipath_make_ruc_header(dev, qp, ohdr, bth0 | (qp->s_state << 24), bth2);
done:
ret = 1;
+ goto unlock;
+
bail:
+ qp->s_flags &= ~IPATH_S_BUSY;
+unlock:
spin_unlock_irqrestore(&qp->s_lock, flags);
return ret;
}
@@ -606,7 +632,11 @@
spin_unlock_irqrestore(&qp->s_lock, flags);
+ /* Don't try to send ACKs if the link isn't ACTIVE */
dd = dev->dd;
+ if (!(dd->ipath_flags & IPATH_LINKACTIVE))
+ goto done;
+
piobuf = ipath_getpiobuf(dd, 0, NULL);
if (!piobuf) {
/*
@@ -668,15 +698,16 @@
goto done;
queue_ack:
- dev->n_rc_qacks++;
- qp->s_flags |= IPATH_S_ACK_PENDING;
- qp->s_nak_state = qp->r_nak_state;
- qp->s_ack_psn = qp->r_ack_psn;
+ if (ib_ipath_state_ops[qp->state] & IPATH_PROCESS_RECV_OK) {
+ dev->n_rc_qacks++;
+ qp->s_flags |= IPATH_S_ACK_PENDING;
+ qp->s_nak_state = qp->r_nak_state;
+ qp->s_ack_psn = qp->r_ack_psn;
+
+ /* Schedule the send tasklet. */
+ ipath_schedule_send(qp);
+ }
spin_unlock_irqrestore(&qp->s_lock, flags);
-
- /* Call ipath_do_rc_send() in another thread. */
- tasklet_hi_schedule(&qp->s_task);
-
done:
return;
}
@@ -735,7 +766,7 @@
/*
* Set the state to restart in the middle of a request.
* Don't change the s_sge, s_cur_sge, or s_cur_size.
- * See ipath_do_rc_send().
+ * See ipath_make_rc_req().
*/
switch (opcode) {
case IB_WR_SEND:
@@ -771,27 +802,14 @@
*
* The QP s_lock should be held and interrupts disabled.
*/
-void ipath_restart_rc(struct ipath_qp *qp, u32 psn, struct ib_wc *wc)
+void ipath_restart_rc(struct ipath_qp *qp, u32 psn)
{
struct ipath_swqe *wqe = get_swqe_ptr(qp, qp->s_last);
struct ipath_ibdev *dev;
if (qp->s_retry == 0) {
- wc->wr_id = wqe->wr.wr_id;
- wc->status = IB_WC_RETRY_EXC_ERR;
- wc->opcode = ib_ipath_wc_opcode[wqe->wr.opcode];
- wc->vendor_err = 0;
- wc->byte_len = 0;
- wc->qp = &qp->ibqp;
- wc->imm_data = 0;
- wc->src_qp = qp->remote_qpn;
- wc->wc_flags = 0;
- wc->pkey_index = 0;
- wc->slid = qp->remote_ah_attr.dlid;
- wc->sl = qp->remote_ah_attr.sl;
- wc->dlid_path_bits = 0;
- wc->port_num = 0;
- ipath_sqerror_qp(qp, wc);
+ ipath_send_complete(qp, wqe, IB_WC_RETRY_EXC_ERR);
+ ipath_error_qp(qp, IB_WC_WR_FLUSH_ERR);
goto bail;
}
qp->s_retry--;
@@ -804,6 +822,8 @@
spin_lock(&dev->pending_lock);
if (!list_empty(&qp->timerwait))
list_del_init(&qp->timerwait);
+ if (!list_empty(&qp->piowait))
+ list_del_init(&qp->piowait);
spin_unlock(&dev->pending_lock);
if (wqe->wr.opcode == IB_WR_RDMA_READ)
@@ -812,7 +832,7 @@
dev->n_rc_resends += (qp->s_psn - psn) & IPATH_PSN_MASK;
reset_psn(qp, psn);
- tasklet_hi_schedule(&qp->s_task);
+ ipath_schedule_send(qp);
bail:
return;
@@ -820,13 +840,7 @@
static inline void update_last_psn(struct ipath_qp *qp, u32 psn)
{
- if (qp->s_last_psn != psn) {
- qp->s_last_psn = psn;
- if (qp->s_wait_credit) {
- qp->s_wait_credit = 0;
- tasklet_hi_schedule(&qp->s_task);
- }
- }
+ qp->s_last_psn = psn;
}
/**
@@ -845,6 +859,7 @@
{
struct ipath_ibdev *dev = to_idev(qp->ibqp.device);
struct ib_wc wc;
+ enum ib_wc_status status;
struct ipath_swqe *wqe;
int ret = 0;
u32 ack_psn;
@@ -909,7 +924,7 @@
*/
update_last_psn(qp, wqe->psn - 1);
/* Retry this request. */
- ipath_restart_rc(qp, wqe->psn, &wc);
+ ipath_restart_rc(qp, wqe->psn);
/*
* No need to process the ACK/NAK since we are
* restarting an earlier request.
@@ -925,32 +940,23 @@
wqe->wr.opcode == IB_WR_ATOMIC_FETCH_AND_ADD)) {
qp->s_num_rd_atomic--;
/* Restart sending task if fence is complete */
- if ((qp->s_flags & IPATH_S_FENCE_PENDING) &&
- !qp->s_num_rd_atomic) {
- qp->s_flags &= ~IPATH_S_FENCE_PENDING;
- tasklet_hi_schedule(&qp->s_task);
- } else if (qp->s_flags & IPATH_S_RDMAR_PENDING) {
- qp->s_flags &= ~IPATH_S_RDMAR_PENDING;
- tasklet_hi_schedule(&qp->s_task);
- }
+ if (((qp->s_flags & IPATH_S_FENCE_PENDING) &&
+ !qp->s_num_rd_atomic) ||
+ qp->s_flags & IPATH_S_RDMAR_PENDING)
+ ipath_schedule_send(qp);
}
/* Post a send completion queue entry if requested. */
if (!(qp->s_flags & IPATH_S_SIGNAL_REQ_WR) ||
(wqe->wr.send_flags & IB_SEND_SIGNALED)) {
+ memset(&wc, 0, sizeof wc);
wc.wr_id = wqe->wr.wr_id;
wc.status = IB_WC_SUCCESS;
wc.opcode = ib_ipath_wc_opcode[wqe->wr.opcode];
- wc.vendor_err = 0;
wc.byte_len = wqe->length;
- wc.imm_data = 0;
wc.qp = &qp->ibqp;
wc.src_qp = qp->remote_qpn;
- wc.wc_flags = 0;
- wc.pkey_index = 0;
wc.slid = qp->remote_ah_attr.dlid;
wc.sl = qp->remote_ah_attr.sl;
- wc.dlid_path_bits = 0;
- wc.port_num = 0;
ipath_cq_enter(to_icq(qp->ibqp.send_cq), &wc, 0);
}
qp->s_retry = qp->s_retry_cnt;
@@ -971,6 +977,8 @@
} else {
if (++qp->s_last >= qp->s_size)
qp->s_last = 0;
+ if (qp->state == IB_QPS_SQD && qp->s_last == qp->s_cur)
+ qp->s_draining = 0;
if (qp->s_last == qp->s_tail)
break;
wqe = get_swqe_ptr(qp, qp->s_last);
@@ -994,7 +1002,7 @@
*/
if (ipath_cmp24(qp->s_psn, psn) <= 0) {
reset_psn(qp, psn + 1);
- tasklet_hi_schedule(&qp->s_task);
+ ipath_schedule_send(qp);
}
} else if (ipath_cmp24(qp->s_psn, psn) <= 0) {
qp->s_state = OP(SEND_LAST);
@@ -1012,7 +1020,7 @@
if (qp->s_last == qp->s_tail)
goto bail;
if (qp->s_rnr_retry == 0) {
- wc.status = IB_WC_RNR_RETRY_EXC_ERR;
+ status = IB_WC_RNR_RETRY_EXC_ERR;
goto class_b;
}
if (qp->s_rnr_retry_cnt < 7)
@@ -1033,6 +1041,7 @@
ib_ipath_rnr_table[(aeth >> IPATH_AETH_CREDIT_SHIFT) &
IPATH_AETH_CREDIT_MASK];
ipath_insert_rnr_queue(qp);
+ ipath_schedule_send(qp);
goto bail;
case 3: /* NAK */
@@ -1050,37 +1059,25 @@
* RDMA READ response which terminates the RDMA
* READ.
*/
- ipath_restart_rc(qp, psn, &wc);
+ ipath_restart_rc(qp, psn);
break;
case 1: /* Invalid Request */
- wc.status = IB_WC_REM_INV_REQ_ERR;
+ status = IB_WC_REM_INV_REQ_ERR;
dev->n_other_naks++;
goto class_b;
case 2: /* Remote Access Error */
- wc.status = IB_WC_REM_ACCESS_ERR;
+ status = IB_WC_REM_ACCESS_ERR;
dev->n_other_naks++;
goto class_b;
case 3: /* Remote Operation Error */
- wc.status = IB_WC_REM_OP_ERR;
+ status = IB_WC_REM_OP_ERR;
dev->n_other_naks++;
class_b:
- wc.wr_id = wqe->wr.wr_id;
- wc.opcode = ib_ipath_wc_opcode[wqe->wr.opcode];
- wc.vendor_err = 0;
- wc.byte_len = 0;
- wc.qp = &qp->ibqp;
- wc.imm_data = 0;
- wc.src_qp = qp->remote_qpn;
- wc.wc_flags = 0;
- wc.pkey_index = 0;
- wc.slid = qp->remote_ah_attr.dlid;
- wc.sl = qp->remote_ah_attr.sl;
- wc.dlid_path_bits = 0;
- wc.port_num = 0;
- ipath_sqerror_qp(qp, &wc);
+ ipath_send_complete(qp, wqe, status);
+ ipath_error_qp(qp, IB_WC_WR_FLUSH_ERR);
break;
default:
@@ -1126,8 +1123,8 @@
int header_in_data)
{
struct ipath_swqe *wqe;
+ enum ib_wc_status status;
unsigned long flags;
- struct ib_wc wc;
int diff;
u32 pad;
u32 aeth;
@@ -1135,6 +1132,10 @@
spin_lock_irqsave(&qp->s_lock, flags);
+ /* Double check we can process this now that we hold the s_lock. */
+ if (!(ib_ipath_state_ops[qp->state] & IPATH_PROCESS_RECV_OK))
+ goto ack_done;
+
/* Ignore invalid responses. */
if (ipath_cmp24(psn, qp->s_next_psn) >= 0)
goto ack_done;
@@ -1159,6 +1160,7 @@
if (unlikely(qp->s_last == qp->s_tail))
goto ack_done;
wqe = get_swqe_ptr(qp, qp->s_last);
+ status = IB_WC_SUCCESS;
switch (opcode) {
case OP(ACKNOWLEDGE):
@@ -1187,6 +1189,7 @@
wqe = get_swqe_ptr(qp, qp->s_last);
if (unlikely(wqe->wr.opcode != IB_WR_RDMA_READ))
goto ack_op_err;
+ qp->r_flags &= ~IPATH_R_RDMAR_SEQ;
/*
* If this is a response to a resent RDMA read, we
* have to be careful to copy the data to the right
@@ -1200,7 +1203,10 @@
/* no AETH, no ACK */
if (unlikely(ipath_cmp24(psn, qp->s_last_psn + 1))) {
dev->n_rdma_seq++;
- ipath_restart_rc(qp, qp->s_last_psn + 1, &wc);
+ if (qp->r_flags & IPATH_R_RDMAR_SEQ)
+ goto ack_done;
+ qp->r_flags |= IPATH_R_RDMAR_SEQ;
+ ipath_restart_rc(qp, qp->s_last_psn + 1);
goto ack_done;
}
if (unlikely(wqe->wr.opcode != IB_WR_RDMA_READ))
@@ -1261,7 +1267,10 @@
/* ACKs READ req. */
if (unlikely(ipath_cmp24(psn, qp->s_last_psn + 1))) {
dev->n_rdma_seq++;
- ipath_restart_rc(qp, qp->s_last_psn + 1, &wc);
+ if (qp->r_flags & IPATH_R_RDMAR_SEQ)
+ goto ack_done;
+ qp->r_flags |= IPATH_R_RDMAR_SEQ;
+ ipath_restart_rc(qp, qp->s_last_psn + 1);
goto ack_done;
}
if (unlikely(wqe->wr.opcode != IB_WR_RDMA_READ))
@@ -1291,31 +1300,16 @@
goto ack_done;
}
-ack_done:
- spin_unlock_irqrestore(&qp->s_lock, flags);
- goto bail;
-
ack_op_err:
- wc.status = IB_WC_LOC_QP_OP_ERR;
+ status = IB_WC_LOC_QP_OP_ERR;
goto ack_err;
ack_len_err:
- wc.status = IB_WC_LOC_LEN_ERR;
+ status = IB_WC_LOC_LEN_ERR;
ack_err:
- wc.wr_id = wqe->wr.wr_id;
- wc.opcode = ib_ipath_wc_opcode[wqe->wr.opcode];
- wc.vendor_err = 0;
- wc.byte_len = 0;
- wc.imm_data = 0;
- wc.qp = &qp->ibqp;
- wc.src_qp = qp->remote_qpn;
- wc.wc_flags = 0;
- wc.pkey_index = 0;
- wc.slid = qp->remote_ah_attr.dlid;
- wc.sl = qp->remote_ah_attr.sl;
- wc.dlid_path_bits = 0;
- wc.port_num = 0;
- ipath_sqerror_qp(qp, &wc);
+ ipath_send_complete(qp, wqe, status);
+ ipath_error_qp(qp, IB_WC_WR_FLUSH_ERR);
+ack_done:
spin_unlock_irqrestore(&qp->s_lock, flags);
bail:
return;
@@ -1384,7 +1378,12 @@
psn &= IPATH_PSN_MASK;
e = NULL;
old_req = 1;
+
spin_lock_irqsave(&qp->s_lock, flags);
+ /* Double check we can process this now that we hold the s_lock. */
+ if (!(ib_ipath_state_ops[qp->state] & IPATH_PROCESS_RECV_OK))
+ goto unlock_done;
+
for (i = qp->r_head_ack_queue; ; i = prev) {
if (i == qp->s_tail_ack_queue)
old_req = 0;
@@ -1512,7 +1511,7 @@
break;
}
qp->r_nak_state = 0;
- tasklet_hi_schedule(&qp->s_task);
+ ipath_schedule_send(qp);
unlock_done:
spin_unlock_irqrestore(&qp->s_lock, flags);
@@ -1523,13 +1522,12 @@
return 0;
}
-static void ipath_rc_error(struct ipath_qp *qp, enum ib_wc_status err)
+void ipath_rc_error(struct ipath_qp *qp, enum ib_wc_status err)
{
unsigned long flags;
int lastwqe;
spin_lock_irqsave(&qp->s_lock, flags);
- qp->state = IB_QPS_ERR;
lastwqe = ipath_error_qp(qp, err);
spin_unlock_irqrestore(&qp->s_lock, flags);
@@ -1545,18 +1543,15 @@
static inline void ipath_update_ack_queue(struct ipath_qp *qp, unsigned n)
{
- unsigned long flags;
unsigned next;
next = n + 1;
if (next > IPATH_MAX_RDMA_ATOMIC)
next = 0;
- spin_lock_irqsave(&qp->s_lock, flags);
if (n == qp->s_tail_ack_queue) {
qp->s_tail_ack_queue = next;
qp->s_ack_state = OP(ACKNOWLEDGE);
}
- spin_unlock_irqrestore(&qp->s_lock, flags);
}
/**
@@ -1585,6 +1580,7 @@
int diff;
struct ib_reth *reth;
int header_in_data;
+ unsigned long flags;
/* Validate the SLID. See Ch. 9.6.1.5 */
if (unlikely(be16_to_cpu(hdr->lrh[3]) != qp->remote_ah_attr.dlid))
@@ -1643,11 +1639,7 @@
opcode == OP(SEND_LAST) ||
opcode == OP(SEND_LAST_WITH_IMMEDIATE))
break;
- nack_inv:
- ipath_rc_error(qp, IB_WC_REM_INV_REQ_ERR);
- qp->r_nak_state = IB_NAK_INVALID_REQUEST;
- qp->r_ack_psn = qp->r_psn;
- goto send_ack;
+ goto nack_inv;
case OP(RDMA_WRITE_FIRST):
case OP(RDMA_WRITE_MIDDLE):
@@ -1673,18 +1665,13 @@
break;
}
- wc.imm_data = 0;
- wc.wc_flags = 0;
+ memset(&wc, 0, sizeof wc);
/* OK, process the packet. */
switch (opcode) {
case OP(SEND_FIRST):
- if (!ipath_get_rwqe(qp, 0)) {
- rnr_nak:
- qp->r_nak_state = IB_RNR_NAK | qp->r_min_rnr_timer;
- qp->r_ack_psn = qp->r_psn;
- goto send_ack;
- }
+ if (!ipath_get_rwqe(qp, 0))
+ goto rnr_nak;
qp->r_rcv_len = 0;
/* FALLTHROUGH */
case OP(SEND_MIDDLE):
@@ -1741,9 +1728,8 @@
goto nack_inv;
ipath_copy_sge(&qp->r_sge, data, tlen);
qp->r_msn++;
- if (!qp->r_wrid_valid)
+ if (!test_and_clear_bit(IPATH_R_WRID_VALID, &qp->r_aflags))
break;
- qp->r_wrid_valid = 0;
wc.wr_id = qp->r_wr_id;
wc.status = IB_WC_SUCCESS;
if (opcode == OP(RDMA_WRITE_LAST_WITH_IMMEDIATE) ||
@@ -1751,14 +1737,10 @@
wc.opcode = IB_WC_RECV_RDMA_WITH_IMM;
else
wc.opcode = IB_WC_RECV;
- wc.vendor_err = 0;
wc.qp = &qp->ibqp;
wc.src_qp = qp->remote_qpn;
- wc.pkey_index = 0;
wc.slid = qp->remote_ah_attr.dlid;
wc.sl = qp->remote_ah_attr.sl;
- wc.dlid_path_bits = 0;
- wc.port_num = 0;
/* Signal completion event if the solicited bit is set. */
ipath_cq_enter(to_icq(qp->ibqp.recv_cq), &wc,
(ohdr->bth[0] &
@@ -1819,9 +1801,13 @@
next = qp->r_head_ack_queue + 1;
if (next > IPATH_MAX_RDMA_ATOMIC)
next = 0;
+ spin_lock_irqsave(&qp->s_lock, flags);
+ /* Double check we can process this while holding the s_lock. */
+ if (!(ib_ipath_state_ops[qp->state] & IPATH_PROCESS_RECV_OK))
+ goto unlock;
if (unlikely(next == qp->s_tail_ack_queue)) {
if (!qp->s_ack_queue[next].sent)
- goto nack_inv;
+ goto nack_inv_unlck;
ipath_update_ack_queue(qp, next);
}
e = &qp->s_ack_queue[qp->r_head_ack_queue];
@@ -1842,7 +1828,7 @@
ok = ipath_rkey_ok(qp, &e->rdma_sge, len, vaddr,
rkey, IB_ACCESS_REMOTE_READ);
if (unlikely(!ok))
- goto nack_acc;
+ goto nack_acc_unlck;
/*
* Update the next expected PSN. We add 1 later
* below, so only add the remainder here.
@@ -1869,13 +1855,12 @@
qp->r_psn++;
qp->r_state = opcode;
qp->r_nak_state = 0;
- barrier();
qp->r_head_ack_queue = next;
- /* Call ipath_do_rc_send() in another thread. */
- tasklet_hi_schedule(&qp->s_task);
+ /* Schedule the send tasklet. */
+ ipath_schedule_send(qp);
- goto done;
+ goto unlock;
}
case OP(COMPARE_SWAP):
@@ -1894,9 +1879,13 @@
next = qp->r_head_ack_queue + 1;
if (next > IPATH_MAX_RDMA_ATOMIC)
next = 0;
+ spin_lock_irqsave(&qp->s_lock, flags);
+ /* Double check we can process this while holding the s_lock. */
+ if (!(ib_ipath_state_ops[qp->state] & IPATH_PROCESS_RECV_OK))
+ goto unlock;
if (unlikely(next == qp->s_tail_ack_queue)) {
if (!qp->s_ack_queue[next].sent)
- goto nack_inv;
+ goto nack_inv_unlck;
ipath_update_ack_queue(qp, next);
}
if (!header_in_data)
@@ -1906,13 +1895,13 @@
vaddr = ((u64) be32_to_cpu(ateth->vaddr[0]) << 32) |
be32_to_cpu(ateth->vaddr[1]);
if (unlikely(vaddr & (sizeof(u64) - 1)))
- goto nack_inv;
+ goto nack_inv_unlck;
rkey = be32_to_cpu(ateth->rkey);
/* Check rkey & NAK */
if (unlikely(!ipath_rkey_ok(qp, &qp->r_sge,
sizeof(u64), vaddr, rkey,
IB_ACCESS_REMOTE_ATOMIC)))
- goto nack_acc;
+ goto nack_acc_unlck;
/* Perform atomic OP and save result. */
maddr = (atomic64_t *) qp->r_sge.sge.vaddr;
sdata = be64_to_cpu(ateth->swap_data);
@@ -1929,13 +1918,12 @@
qp->r_psn++;
qp->r_state = opcode;
qp->r_nak_state = 0;
- barrier();
qp->r_head_ack_queue = next;
- /* Call ipath_do_rc_send() in another thread. */
- tasklet_hi_schedule(&qp->s_task);
+ /* Schedule the send tasklet. */
+ ipath_schedule_send(qp);
- goto done;
+ goto unlock;
}
default:
@@ -1951,14 +1939,31 @@
goto send_ack;
goto done;
+rnr_nak:
+ qp->r_nak_state = IB_RNR_NAK | qp->r_min_rnr_timer;
+ qp->r_ack_psn = qp->r_psn;
+ goto send_ack;
+
+nack_inv_unlck:
+ spin_unlock_irqrestore(&qp->s_lock, flags);
+nack_inv:
+ ipath_rc_error(qp, IB_WC_LOC_QP_OP_ERR);
+ qp->r_nak_state = IB_NAK_INVALID_REQUEST;
+ qp->r_ack_psn = qp->r_psn;
+ goto send_ack;
+
+nack_acc_unlck:
+ spin_unlock_irqrestore(&qp->s_lock, flags);
nack_acc:
- ipath_rc_error(qp, IB_WC_REM_ACCESS_ERR);
+ ipath_rc_error(qp, IB_WC_LOC_PROT_ERR);
qp->r_nak_state = IB_NAK_REMOTE_ACCESS_ERROR;
qp->r_ack_psn = qp->r_psn;
-
send_ack:
send_rc_ack(qp);
+ goto done;
+unlock:
+ spin_unlock_irqrestore(&qp->s_lock, flags);
done:
return;
}
diff --git a/drivers/infiniband/hw/ipath/ipath_ruc.c b/drivers/infiniband/hw/ipath/ipath_ruc.c
index 9e3fe61..a4b5521 100644
--- a/drivers/infiniband/hw/ipath/ipath_ruc.c
+++ b/drivers/infiniband/hw/ipath/ipath_ruc.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2006, 2007 QLogic Corporation. All rights reserved.
+ * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved.
* Copyright (c) 2005, 2006 PathScale, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
@@ -78,6 +78,7 @@
* ipath_insert_rnr_queue - put QP on the RNR timeout list for the device
* @qp: the QP
*
+ * Called with the QP s_lock held and interrupts disabled.
* XXX Use a simple list for now. We might need a priority
* queue if we have lots of QPs waiting for RNR timeouts
* but that should be rare.
@@ -85,9 +86,9 @@
void ipath_insert_rnr_queue(struct ipath_qp *qp)
{
struct ipath_ibdev *dev = to_idev(qp->ibqp.device);
- unsigned long flags;
- spin_lock_irqsave(&dev->pending_lock, flags);
+ /* We already did a spin_lock_irqsave(), so just use spin_lock */
+ spin_lock(&dev->pending_lock);
if (list_empty(&dev->rnrwait))
list_add(&qp->timerwait, &dev->rnrwait);
else {
@@ -109,7 +110,7 @@
nqp->s_rnr_timeout -= qp->s_rnr_timeout;
list_add(&qp->timerwait, l);
}
- spin_unlock_irqrestore(&dev->pending_lock, flags);
+ spin_unlock(&dev->pending_lock);
}
/**
@@ -140,20 +141,11 @@
goto bail;
bad_lkey:
+ memset(&wc, 0, sizeof(wc));
wc.wr_id = wqe->wr_id;
wc.status = IB_WC_LOC_PROT_ERR;
wc.opcode = IB_WC_RECV;
- wc.vendor_err = 0;
- wc.byte_len = 0;
- wc.imm_data = 0;
wc.qp = &qp->ibqp;
- wc.src_qp = 0;
- wc.wc_flags = 0;
- wc.pkey_index = 0;
- wc.slid = 0;
- wc.sl = 0;
- wc.dlid_path_bits = 0;
- wc.port_num = 0;
/* Signal solicited completion event. */
ipath_cq_enter(to_icq(qp->ibqp.recv_cq), &wc, 1);
ret = 0;
@@ -194,6 +186,11 @@
}
spin_lock_irqsave(&rq->lock, flags);
+ if (!(ib_ipath_state_ops[qp->state] & IPATH_PROCESS_RECV_OK)) {
+ ret = 0;
+ goto unlock;
+ }
+
wq = rq->wq;
tail = wq->tail;
/* Validate tail before using it since it is user writable. */
@@ -201,9 +198,8 @@
tail = 0;
do {
if (unlikely(tail == wq->head)) {
- spin_unlock_irqrestore(&rq->lock, flags);
ret = 0;
- goto bail;
+ goto unlock;
}
/* Make sure entry is read after head index is read. */
smp_rmb();
@@ -216,7 +212,7 @@
wq->tail = tail;
ret = 1;
- qp->r_wrid_valid = 1;
+ set_bit(IPATH_R_WRID_VALID, &qp->r_aflags);
if (handler) {
u32 n;
@@ -243,8 +239,8 @@
goto bail;
}
}
+unlock:
spin_unlock_irqrestore(&rq->lock, flags);
-
bail:
return ret;
}
@@ -270,38 +266,63 @@
struct ib_wc wc;
u64 sdata;
atomic64_t *maddr;
+ enum ib_wc_status send_status;
+ /*
+ * Note that we check the responder QP state after
+ * checking the requester's state.
+ */
qp = ipath_lookup_qpn(&dev->qp_table, sqp->remote_qpn);
- if (!qp) {
- dev->n_pkt_drops++;
- return;
- }
-again:
spin_lock_irqsave(&sqp->s_lock, flags);
- if (!(ib_ipath_state_ops[sqp->state] & IPATH_PROCESS_SEND_OK) ||
- sqp->s_rnr_timeout) {
- spin_unlock_irqrestore(&sqp->s_lock, flags);
- goto done;
- }
+ /* Return if we are already busy processing a work request. */
+ if ((sqp->s_flags & (IPATH_S_BUSY | IPATH_S_ANY_WAIT)) ||
+ !(ib_ipath_state_ops[sqp->state] & IPATH_PROCESS_OR_FLUSH_SEND))
+ goto unlock;
- /* Get the next send request. */
- if (sqp->s_last == sqp->s_head) {
- /* Send work queue is empty. */
- spin_unlock_irqrestore(&sqp->s_lock, flags);
- goto done;
+ sqp->s_flags |= IPATH_S_BUSY;
+
+again:
+ if (sqp->s_last == sqp->s_head)
+ goto clr_busy;
+ wqe = get_swqe_ptr(sqp, sqp->s_last);
+
+ /* Return if it is not OK to start a new work reqeust. */
+ if (!(ib_ipath_state_ops[sqp->state] & IPATH_PROCESS_NEXT_SEND_OK)) {
+ if (!(ib_ipath_state_ops[sqp->state] & IPATH_FLUSH_SEND))
+ goto clr_busy;
+ /* We are in the error state, flush the work request. */
+ send_status = IB_WC_WR_FLUSH_ERR;
+ goto flush_send;
}
/*
* We can rely on the entry not changing without the s_lock
* being held until we update s_last.
+ * We increment s_cur to indicate s_last is in progress.
*/
- wqe = get_swqe_ptr(sqp, sqp->s_last);
+ if (sqp->s_last == sqp->s_cur) {
+ if (++sqp->s_cur >= sqp->s_size)
+ sqp->s_cur = 0;
+ }
spin_unlock_irqrestore(&sqp->s_lock, flags);
- wc.wc_flags = 0;
- wc.imm_data = 0;
+ if (!qp || !(ib_ipath_state_ops[qp->state] & IPATH_PROCESS_RECV_OK)) {
+ dev->n_pkt_drops++;
+ /*
+ * For RC, the requester would timeout and retry so
+ * shortcut the timeouts and just signal too many retries.
+ */
+ if (sqp->ibqp.qp_type == IB_QPT_RC)
+ send_status = IB_WC_RETRY_EXC_ERR;
+ else
+ send_status = IB_WC_SUCCESS;
+ goto serr;
+ }
+
+ memset(&wc, 0, sizeof wc);
+ send_status = IB_WC_SUCCESS;
sqp->s_sge.sge = wqe->sg_list[0];
sqp->s_sge.sg_list = wqe->sg_list + 1;
@@ -313,75 +334,33 @@
wc.imm_data = wqe->wr.ex.imm_data;
/* FALLTHROUGH */
case IB_WR_SEND:
- if (!ipath_get_rwqe(qp, 0)) {
- rnr_nak:
- /* Handle RNR NAK */
- if (qp->ibqp.qp_type == IB_QPT_UC)
- goto send_comp;
- if (sqp->s_rnr_retry == 0) {
- wc.status = IB_WC_RNR_RETRY_EXC_ERR;
- goto err;
- }
- if (sqp->s_rnr_retry_cnt < 7)
- sqp->s_rnr_retry--;
- dev->n_rnr_naks++;
- sqp->s_rnr_timeout =
- ib_ipath_rnr_table[qp->r_min_rnr_timer];
- ipath_insert_rnr_queue(sqp);
- goto done;
- }
+ if (!ipath_get_rwqe(qp, 0))
+ goto rnr_nak;
break;
case IB_WR_RDMA_WRITE_WITH_IMM:
- if (unlikely(!(qp->qp_access_flags &
- IB_ACCESS_REMOTE_WRITE))) {
- wc.status = IB_WC_REM_INV_REQ_ERR;
- goto err;
- }
+ if (unlikely(!(qp->qp_access_flags & IB_ACCESS_REMOTE_WRITE)))
+ goto inv_err;
wc.wc_flags = IB_WC_WITH_IMM;
wc.imm_data = wqe->wr.ex.imm_data;
if (!ipath_get_rwqe(qp, 1))
goto rnr_nak;
/* FALLTHROUGH */
case IB_WR_RDMA_WRITE:
- if (unlikely(!(qp->qp_access_flags &
- IB_ACCESS_REMOTE_WRITE))) {
- wc.status = IB_WC_REM_INV_REQ_ERR;
- goto err;
- }
+ if (unlikely(!(qp->qp_access_flags & IB_ACCESS_REMOTE_WRITE)))
+ goto inv_err;
if (wqe->length == 0)
break;
if (unlikely(!ipath_rkey_ok(qp, &qp->r_sge, wqe->length,
wqe->wr.wr.rdma.remote_addr,
wqe->wr.wr.rdma.rkey,
- IB_ACCESS_REMOTE_WRITE))) {
- acc_err:
- wc.status = IB_WC_REM_ACCESS_ERR;
- err:
- wc.wr_id = wqe->wr.wr_id;
- wc.opcode = ib_ipath_wc_opcode[wqe->wr.opcode];
- wc.vendor_err = 0;
- wc.byte_len = 0;
- wc.qp = &sqp->ibqp;
- wc.src_qp = sqp->remote_qpn;
- wc.pkey_index = 0;
- wc.slid = sqp->remote_ah_attr.dlid;
- wc.sl = sqp->remote_ah_attr.sl;
- wc.dlid_path_bits = 0;
- wc.port_num = 0;
- spin_lock_irqsave(&sqp->s_lock, flags);
- ipath_sqerror_qp(sqp, &wc);
- spin_unlock_irqrestore(&sqp->s_lock, flags);
- goto done;
- }
+ IB_ACCESS_REMOTE_WRITE)))
+ goto acc_err;
break;
case IB_WR_RDMA_READ:
- if (unlikely(!(qp->qp_access_flags &
- IB_ACCESS_REMOTE_READ))) {
- wc.status = IB_WC_REM_INV_REQ_ERR;
- goto err;
- }
+ if (unlikely(!(qp->qp_access_flags & IB_ACCESS_REMOTE_READ)))
+ goto inv_err;
if (unlikely(!ipath_rkey_ok(qp, &sqp->s_sge, wqe->length,
wqe->wr.wr.rdma.remote_addr,
wqe->wr.wr.rdma.rkey,
@@ -394,11 +373,8 @@
case IB_WR_ATOMIC_CMP_AND_SWP:
case IB_WR_ATOMIC_FETCH_AND_ADD:
- if (unlikely(!(qp->qp_access_flags &
- IB_ACCESS_REMOTE_ATOMIC))) {
- wc.status = IB_WC_REM_INV_REQ_ERR;
- goto err;
- }
+ if (unlikely(!(qp->qp_access_flags & IB_ACCESS_REMOTE_ATOMIC)))
+ goto inv_err;
if (unlikely(!ipath_rkey_ok(qp, &qp->r_sge, sizeof(u64),
wqe->wr.wr.atomic.remote_addr,
wqe->wr.wr.atomic.rkey,
@@ -415,7 +391,8 @@
goto send_comp;
default:
- goto done;
+ send_status = IB_WC_LOC_QP_OP_ERR;
+ goto serr;
}
sge = &sqp->s_sge.sge;
@@ -448,8 +425,7 @@
sqp->s_len -= len;
}
- if (wqe->wr.opcode == IB_WR_RDMA_WRITE ||
- wqe->wr.opcode == IB_WR_RDMA_READ)
+ if (!test_and_clear_bit(IPATH_R_WRID_VALID, &qp->r_aflags))
goto send_comp;
if (wqe->wr.opcode == IB_WR_RDMA_WRITE_WITH_IMM)
@@ -458,33 +434,89 @@
wc.opcode = IB_WC_RECV;
wc.wr_id = qp->r_wr_id;
wc.status = IB_WC_SUCCESS;
- wc.vendor_err = 0;
wc.byte_len = wqe->length;
wc.qp = &qp->ibqp;
wc.src_qp = qp->remote_qpn;
- wc.pkey_index = 0;
wc.slid = qp->remote_ah_attr.dlid;
wc.sl = qp->remote_ah_attr.sl;
- wc.dlid_path_bits = 0;
wc.port_num = 1;
/* Signal completion event if the solicited bit is set. */
ipath_cq_enter(to_icq(qp->ibqp.recv_cq), &wc,
wqe->wr.send_flags & IB_SEND_SOLICITED);
send_comp:
+ spin_lock_irqsave(&sqp->s_lock, flags);
+flush_send:
sqp->s_rnr_retry = sqp->s_rnr_retry_cnt;
- ipath_send_complete(sqp, wqe, IB_WC_SUCCESS);
+ ipath_send_complete(sqp, wqe, send_status);
goto again;
+rnr_nak:
+ /* Handle RNR NAK */
+ if (qp->ibqp.qp_type == IB_QPT_UC)
+ goto send_comp;
+ /*
+ * Note: we don't need the s_lock held since the BUSY flag
+ * makes this single threaded.
+ */
+ if (sqp->s_rnr_retry == 0) {
+ send_status = IB_WC_RNR_RETRY_EXC_ERR;
+ goto serr;
+ }
+ if (sqp->s_rnr_retry_cnt < 7)
+ sqp->s_rnr_retry--;
+ spin_lock_irqsave(&sqp->s_lock, flags);
+ if (!(ib_ipath_state_ops[sqp->state] & IPATH_PROCESS_RECV_OK))
+ goto clr_busy;
+ sqp->s_flags |= IPATH_S_WAITING;
+ dev->n_rnr_naks++;
+ sqp->s_rnr_timeout = ib_ipath_rnr_table[qp->r_min_rnr_timer];
+ ipath_insert_rnr_queue(sqp);
+ goto clr_busy;
+
+inv_err:
+ send_status = IB_WC_REM_INV_REQ_ERR;
+ wc.status = IB_WC_LOC_QP_OP_ERR;
+ goto err;
+
+acc_err:
+ send_status = IB_WC_REM_ACCESS_ERR;
+ wc.status = IB_WC_LOC_PROT_ERR;
+err:
+ /* responder goes to error state */
+ ipath_rc_error(qp, wc.status);
+
+serr:
+ spin_lock_irqsave(&sqp->s_lock, flags);
+ ipath_send_complete(sqp, wqe, send_status);
+ if (sqp->ibqp.qp_type == IB_QPT_RC) {
+ int lastwqe = ipath_error_qp(sqp, IB_WC_WR_FLUSH_ERR);
+
+ sqp->s_flags &= ~IPATH_S_BUSY;
+ spin_unlock_irqrestore(&sqp->s_lock, flags);
+ if (lastwqe) {
+ struct ib_event ev;
+
+ ev.device = sqp->ibqp.device;
+ ev.element.qp = &sqp->ibqp;
+ ev.event = IB_EVENT_QP_LAST_WQE_REACHED;
+ sqp->ibqp.event_handler(&ev, sqp->ibqp.qp_context);
+ }
+ goto done;
+ }
+clr_busy:
+ sqp->s_flags &= ~IPATH_S_BUSY;
+unlock:
+ spin_unlock_irqrestore(&sqp->s_lock, flags);
done:
- if (atomic_dec_and_test(&qp->refcount))
+ if (qp && atomic_dec_and_test(&qp->refcount))
wake_up(&qp->wait);
}
static void want_buffer(struct ipath_devdata *dd, struct ipath_qp *qp)
{
if (!(dd->ipath_flags & IPATH_HAS_SEND_DMA) ||
- qp->ibqp.qp_type == IB_QPT_SMI) {
+ qp->ibqp.qp_type == IB_QPT_SMI) {
unsigned long flags;
spin_lock_irqsave(&dd->ipath_sendctrl_lock, flags);
@@ -502,26 +534,36 @@
* @dev: the device we ran out of buffers on
*
* Called when we run out of PIO buffers.
+ * If we are now in the error state, return zero to flush the
+ * send work request.
*/
-static void ipath_no_bufs_available(struct ipath_qp *qp,
+static int ipath_no_bufs_available(struct ipath_qp *qp,
struct ipath_ibdev *dev)
{
unsigned long flags;
+ int ret = 1;
/*
* Note that as soon as want_buffer() is called and
* possibly before it returns, ipath_ib_piobufavail()
- * could be called. If we are still in the tasklet function,
- * tasklet_hi_schedule() will not call us until the next time
- * tasklet_hi_schedule() is called.
- * We leave the busy flag set so that another post send doesn't
- * try to put the same QP on the piowait list again.
+ * could be called. Therefore, put QP on the piowait list before
+ * enabling the PIO avail interrupt.
*/
- spin_lock_irqsave(&dev->pending_lock, flags);
- list_add_tail(&qp->piowait, &dev->piowait);
- spin_unlock_irqrestore(&dev->pending_lock, flags);
- want_buffer(dev->dd, qp);
- dev->n_piowait++;
+ spin_lock_irqsave(&qp->s_lock, flags);
+ if (ib_ipath_state_ops[qp->state] & IPATH_PROCESS_SEND_OK) {
+ dev->n_piowait++;
+ qp->s_flags |= IPATH_S_WAITING;
+ qp->s_flags &= ~IPATH_S_BUSY;
+ spin_lock(&dev->pending_lock);
+ if (list_empty(&qp->piowait))
+ list_add_tail(&qp->piowait, &dev->piowait);
+ spin_unlock(&dev->pending_lock);
+ } else
+ ret = 0;
+ spin_unlock_irqrestore(&qp->s_lock, flags);
+ if (ret)
+ want_buffer(dev->dd, qp);
+ return ret;
}
/**
@@ -597,15 +639,13 @@
struct ipath_qp *qp = (struct ipath_qp *)data;
struct ipath_ibdev *dev = to_idev(qp->ibqp.device);
int (*make_req)(struct ipath_qp *qp);
-
- if (test_and_set_bit(IPATH_S_BUSY, &qp->s_busy))
- goto bail;
+ unsigned long flags;
if ((qp->ibqp.qp_type == IB_QPT_RC ||
qp->ibqp.qp_type == IB_QPT_UC) &&
qp->remote_ah_attr.dlid == dev->dd->ipath_lid) {
ipath_ruc_loopback(qp);
- goto clear;
+ goto bail;
}
if (qp->ibqp.qp_type == IB_QPT_RC)
@@ -615,6 +655,19 @@
else
make_req = ipath_make_ud_req;
+ spin_lock_irqsave(&qp->s_lock, flags);
+
+ /* Return if we are already busy processing a work request. */
+ if ((qp->s_flags & (IPATH_S_BUSY | IPATH_S_ANY_WAIT)) ||
+ !(ib_ipath_state_ops[qp->state] & IPATH_PROCESS_OR_FLUSH_SEND)) {
+ spin_unlock_irqrestore(&qp->s_lock, flags);
+ goto bail;
+ }
+
+ qp->s_flags |= IPATH_S_BUSY;
+
+ spin_unlock_irqrestore(&qp->s_lock, flags);
+
again:
/* Check for a constructed packet to be sent. */
if (qp->s_hdrwords != 0) {
@@ -624,8 +677,8 @@
*/
if (ipath_verbs_send(qp, &qp->s_hdr, qp->s_hdrwords,
qp->s_cur_sge, qp->s_cur_size)) {
- ipath_no_bufs_available(qp, dev);
- goto bail;
+ if (ipath_no_bufs_available(qp, dev))
+ goto bail;
}
dev->n_unicast_xmit++;
/* Record that we sent the packet and s_hdr is empty. */
@@ -634,16 +687,20 @@
if (make_req(qp))
goto again;
-clear:
- clear_bit(IPATH_S_BUSY, &qp->s_busy);
+
bail:;
}
+/*
+ * This should be called with s_lock held.
+ */
void ipath_send_complete(struct ipath_qp *qp, struct ipath_swqe *wqe,
enum ib_wc_status status)
{
- unsigned long flags;
- u32 last;
+ u32 old_last, last;
+
+ if (!(ib_ipath_state_ops[qp->state] & IPATH_PROCESS_OR_FLUSH_SEND))
+ return;
/* See ch. 11.2.4.1 and 10.7.3.1 */
if (!(qp->s_flags & IPATH_S_SIGNAL_REQ_WR) ||
@@ -651,27 +708,25 @@
status != IB_WC_SUCCESS) {
struct ib_wc wc;
+ memset(&wc, 0, sizeof wc);
wc.wr_id = wqe->wr.wr_id;
wc.status = status;
wc.opcode = ib_ipath_wc_opcode[wqe->wr.opcode];
- wc.vendor_err = 0;
- wc.byte_len = wqe->length;
- wc.imm_data = 0;
wc.qp = &qp->ibqp;
- wc.src_qp = 0;
- wc.wc_flags = 0;
- wc.pkey_index = 0;
- wc.slid = 0;
- wc.sl = 0;
- wc.dlid_path_bits = 0;
- wc.port_num = 0;
- ipath_cq_enter(to_icq(qp->ibqp.send_cq), &wc, 0);
+ if (status == IB_WC_SUCCESS)
+ wc.byte_len = wqe->length;
+ ipath_cq_enter(to_icq(qp->ibqp.send_cq), &wc,
+ status != IB_WC_SUCCESS);
}
- spin_lock_irqsave(&qp->s_lock, flags);
- last = qp->s_last;
+ old_last = last = qp->s_last;
if (++last >= qp->s_size)
last = 0;
qp->s_last = last;
- spin_unlock_irqrestore(&qp->s_lock, flags);
+ if (qp->s_cur == old_last)
+ qp->s_cur = last;
+ if (qp->s_tail == old_last)
+ qp->s_tail = last;
+ if (qp->state == IB_QPS_SQD && last == qp->s_cur)
+ qp->s_draining = 0;
}
diff --git a/drivers/infiniband/hw/ipath/ipath_sdma.c b/drivers/infiniband/hw/ipath/ipath_sdma.c
index 3697449..eaba032 100644
--- a/drivers/infiniband/hw/ipath/ipath_sdma.c
+++ b/drivers/infiniband/hw/ipath/ipath_sdma.c
@@ -263,14 +263,10 @@
hwstatus = ipath_read_kreg64(dd,
dd->ipath_kregs->kr_senddmastatus);
- if (/* ScoreBoardDrainInProg */
- test_bit(63, &hwstatus) ||
- /* AbortInProg */
- test_bit(62, &hwstatus) ||
- /* InternalSDmaEnable */
- test_bit(61, &hwstatus) ||
- /* ScbEmpty */
- !test_bit(30, &hwstatus)) {
+ if ((hwstatus & (IPATH_SDMA_STATUS_SCORE_BOARD_DRAIN_IN_PROG |
+ IPATH_SDMA_STATUS_ABORT_IN_PROG |
+ IPATH_SDMA_STATUS_INTERNAL_SDMA_ENABLE)) ||
+ !(hwstatus & IPATH_SDMA_STATUS_SCB_EMPTY)) {
if (dd->ipath_sdma_reset_wait > 0) {
/* not done shutting down sdma */
--dd->ipath_sdma_reset_wait;
@@ -345,7 +341,7 @@
* state change
*/
if (jiffies > dd->ipath_sdma_abort_jiffies) {
- ipath_dbg("looping with status 0x%016llx\n",
+ ipath_dbg("looping with status 0x%08lx\n",
dd->ipath_sdma_status);
dd->ipath_sdma_abort_jiffies = jiffies + 5 * HZ;
}
@@ -615,7 +611,7 @@
}
spin_unlock_irqrestore(&dd->ipath_sdma_lock, flags);
if (!needed) {
- ipath_dbg("invalid attempt to restart SDMA, status 0x%016llx\n",
+ ipath_dbg("invalid attempt to restart SDMA, status 0x%08lx\n",
dd->ipath_sdma_status);
goto bail;
}
diff --git a/drivers/infiniband/hw/ipath/ipath_uc.c b/drivers/infiniband/hw/ipath/ipath_uc.c
index bfe8926..0596ec1 100644
--- a/drivers/infiniband/hw/ipath/ipath_uc.c
+++ b/drivers/infiniband/hw/ipath/ipath_uc.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2006, 2007 QLogic Corporation. All rights reserved.
+ * Copyright (c) 2006, 2007, 2008 QLogic Corporation. All rights reserved.
* Copyright (c) 2005, 2006 PathScale, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
@@ -47,14 +47,30 @@
{
struct ipath_other_headers *ohdr;
struct ipath_swqe *wqe;
+ unsigned long flags;
u32 hwords;
u32 bth0;
u32 len;
u32 pmtu = ib_mtu_enum_to_int(qp->path_mtu);
int ret = 0;
- if (!(ib_ipath_state_ops[qp->state] & IPATH_PROCESS_SEND_OK))
+ spin_lock_irqsave(&qp->s_lock, flags);
+
+ if (!(ib_ipath_state_ops[qp->state] & IPATH_PROCESS_SEND_OK)) {
+ if (!(ib_ipath_state_ops[qp->state] & IPATH_FLUSH_SEND))
+ goto bail;
+ /* We are in the error state, flush the work request. */
+ if (qp->s_last == qp->s_head)
+ goto bail;
+ /* If DMAs are in progress, we can't flush immediately. */
+ if (atomic_read(&qp->s_dma_busy)) {
+ qp->s_flags |= IPATH_S_WAIT_DMA;
+ goto bail;
+ }
+ wqe = get_swqe_ptr(qp, qp->s_last);
+ ipath_send_complete(qp, wqe, IB_WC_WR_FLUSH_ERR);
goto done;
+ }
ohdr = &qp->s_hdr.u.oth;
if (qp->remote_ah_attr.ah_flags & IB_AH_GRH)
@@ -69,9 +85,12 @@
qp->s_wqe = NULL;
switch (qp->s_state) {
default:
+ if (!(ib_ipath_state_ops[qp->state] &
+ IPATH_PROCESS_NEXT_SEND_OK))
+ goto bail;
/* Check if send work queue is empty. */
if (qp->s_cur == qp->s_head)
- goto done;
+ goto bail;
/*
* Start a new request.
*/
@@ -134,7 +153,7 @@
break;
default:
- goto done;
+ goto bail;
}
break;
@@ -194,9 +213,14 @@
ipath_make_ruc_header(to_idev(qp->ibqp.device),
qp, ohdr, bth0 | (qp->s_state << 24),
qp->s_next_psn++ & IPATH_PSN_MASK);
- ret = 1;
-
done:
+ ret = 1;
+ goto unlock;
+
+bail:
+ qp->s_flags &= ~IPATH_S_BUSY;
+unlock:
+ spin_unlock_irqrestore(&qp->s_lock, flags);
return ret;
}
@@ -258,8 +282,7 @@
*/
opcode = be32_to_cpu(ohdr->bth[0]) >> 24;
- wc.imm_data = 0;
- wc.wc_flags = 0;
+ memset(&wc, 0, sizeof wc);
/* Compare the PSN verses the expected PSN. */
if (unlikely(ipath_cmp24(psn, qp->r_psn) != 0)) {
@@ -322,8 +345,8 @@
case OP(SEND_ONLY):
case OP(SEND_ONLY_WITH_IMMEDIATE):
send_first:
- if (qp->r_reuse_sge) {
- qp->r_reuse_sge = 0;
+ if (qp->r_flags & IPATH_R_REUSE_SGE) {
+ qp->r_flags &= ~IPATH_R_REUSE_SGE;
qp->r_sge = qp->s_rdma_read_sge;
} else if (!ipath_get_rwqe(qp, 0)) {
dev->n_pkt_drops++;
@@ -340,13 +363,13 @@
case OP(SEND_MIDDLE):
/* Check for invalid length PMTU or posted rwqe len. */
if (unlikely(tlen != (hdrsize + pmtu + 4))) {
- qp->r_reuse_sge = 1;
+ qp->r_flags |= IPATH_R_REUSE_SGE;
dev->n_pkt_drops++;
goto done;
}
qp->r_rcv_len += pmtu;
if (unlikely(qp->r_rcv_len > qp->r_len)) {
- qp->r_reuse_sge = 1;
+ qp->r_flags |= IPATH_R_REUSE_SGE;
dev->n_pkt_drops++;
goto done;
}
@@ -372,7 +395,7 @@
/* Check for invalid length. */
/* XXX LAST len should be >= 1 */
if (unlikely(tlen < (hdrsize + pad + 4))) {
- qp->r_reuse_sge = 1;
+ qp->r_flags |= IPATH_R_REUSE_SGE;
dev->n_pkt_drops++;
goto done;
}
@@ -380,24 +403,19 @@
tlen -= (hdrsize + pad + 4);
wc.byte_len = tlen + qp->r_rcv_len;
if (unlikely(wc.byte_len > qp->r_len)) {
- qp->r_reuse_sge = 1;
+ qp->r_flags |= IPATH_R_REUSE_SGE;
dev->n_pkt_drops++;
goto done;
}
- /* XXX Need to free SGEs */
+ wc.opcode = IB_WC_RECV;
last_imm:
ipath_copy_sge(&qp->r_sge, data, tlen);
wc.wr_id = qp->r_wr_id;
wc.status = IB_WC_SUCCESS;
- wc.opcode = IB_WC_RECV;
- wc.vendor_err = 0;
wc.qp = &qp->ibqp;
wc.src_qp = qp->remote_qpn;
- wc.pkey_index = 0;
wc.slid = qp->remote_ah_attr.dlid;
wc.sl = qp->remote_ah_attr.sl;
- wc.dlid_path_bits = 0;
- wc.port_num = 0;
/* Signal completion event if the solicited bit is set. */
ipath_cq_enter(to_icq(qp->ibqp.recv_cq), &wc,
(ohdr->bth[0] &
@@ -488,13 +506,14 @@
dev->n_pkt_drops++;
goto done;
}
- if (qp->r_reuse_sge)
- qp->r_reuse_sge = 0;
+ if (qp->r_flags & IPATH_R_REUSE_SGE)
+ qp->r_flags &= ~IPATH_R_REUSE_SGE;
else if (!ipath_get_rwqe(qp, 1)) {
dev->n_pkt_drops++;
goto done;
}
wc.byte_len = qp->r_len;
+ wc.opcode = IB_WC_RECV_RDMA_WITH_IMM;
goto last_imm;
case OP(RDMA_WRITE_LAST):
diff --git a/drivers/infiniband/hw/ipath/ipath_ud.c b/drivers/infiniband/hw/ipath/ipath_ud.c
index 8b6a261..77ca8ca 100644
--- a/drivers/infiniband/hw/ipath/ipath_ud.c
+++ b/drivers/infiniband/hw/ipath/ipath_ud.c
@@ -65,9 +65,9 @@
u32 length;
qp = ipath_lookup_qpn(&dev->qp_table, swqe->wr.wr.ud.remote_qpn);
- if (!qp) {
+ if (!qp || !(ib_ipath_state_ops[qp->state] & IPATH_PROCESS_RECV_OK)) {
dev->n_pkt_drops++;
- goto send_comp;
+ goto done;
}
rsge.sg_list = NULL;
@@ -91,14 +91,12 @@
* present on the wire.
*/
length = swqe->length;
+ memset(&wc, 0, sizeof wc);
wc.byte_len = length + sizeof(struct ib_grh);
if (swqe->wr.opcode == IB_WR_SEND_WITH_IMM) {
wc.wc_flags = IB_WC_WITH_IMM;
wc.imm_data = swqe->wr.ex.imm_data;
- } else {
- wc.wc_flags = 0;
- wc.imm_data = 0;
}
/*
@@ -229,7 +227,6 @@
}
wc.status = IB_WC_SUCCESS;
wc.opcode = IB_WC_RECV;
- wc.vendor_err = 0;
wc.qp = &qp->ibqp;
wc.src_qp = sqp->ibqp.qp_num;
/* XXX do we know which pkey matched? Only needed for GSI. */
@@ -248,8 +245,7 @@
kfree(rsge.sg_list);
if (atomic_dec_and_test(&qp->refcount))
wake_up(&qp->wait);
-send_comp:
- ipath_send_complete(sqp, swqe, IB_WC_SUCCESS);
+done:;
}
/**
@@ -264,6 +260,7 @@
struct ipath_other_headers *ohdr;
struct ib_ah_attr *ah_attr;
struct ipath_swqe *wqe;
+ unsigned long flags;
u32 nwords;
u32 extra_bytes;
u32 bth0;
@@ -271,13 +268,30 @@
u16 lid;
int ret = 0;
- if (unlikely(!(ib_ipath_state_ops[qp->state] & IPATH_PROCESS_SEND_OK)))
- goto bail;
+ spin_lock_irqsave(&qp->s_lock, flags);
+
+ if (!(ib_ipath_state_ops[qp->state] & IPATH_PROCESS_NEXT_SEND_OK)) {
+ if (!(ib_ipath_state_ops[qp->state] & IPATH_FLUSH_SEND))
+ goto bail;
+ /* We are in the error state, flush the work request. */
+ if (qp->s_last == qp->s_head)
+ goto bail;
+ /* If DMAs are in progress, we can't flush immediately. */
+ if (atomic_read(&qp->s_dma_busy)) {
+ qp->s_flags |= IPATH_S_WAIT_DMA;
+ goto bail;
+ }
+ wqe = get_swqe_ptr(qp, qp->s_last);
+ ipath_send_complete(qp, wqe, IB_WC_WR_FLUSH_ERR);
+ goto done;
+ }
if (qp->s_cur == qp->s_head)
goto bail;
wqe = get_swqe_ptr(qp, qp->s_cur);
+ if (++qp->s_cur >= qp->s_size)
+ qp->s_cur = 0;
/* Construct the header. */
ah_attr = &to_iah(wqe->wr.wr.ud.ah)->attr;
@@ -288,10 +302,23 @@
dev->n_unicast_xmit++;
} else {
dev->n_unicast_xmit++;
- lid = ah_attr->dlid &
- ~((1 << dev->dd->ipath_lmc) - 1);
+ lid = ah_attr->dlid & ~((1 << dev->dd->ipath_lmc) - 1);
if (unlikely(lid == dev->dd->ipath_lid)) {
+ /*
+ * If DMAs are in progress, we can't generate
+ * a completion for the loopback packet since
+ * it would be out of order.
+ * XXX Instead of waiting, we could queue a
+ * zero length descriptor so we get a callback.
+ */
+ if (atomic_read(&qp->s_dma_busy)) {
+ qp->s_flags |= IPATH_S_WAIT_DMA;
+ goto bail;
+ }
+ spin_unlock_irqrestore(&qp->s_lock, flags);
ipath_ud_loopback(qp, wqe);
+ spin_lock_irqsave(&qp->s_lock, flags);
+ ipath_send_complete(qp, wqe, IB_WC_SUCCESS);
goto done;
}
}
@@ -368,11 +395,13 @@
ohdr->u.ud.deth[1] = cpu_to_be32(qp->ibqp.qp_num);
done:
- if (++qp->s_cur >= qp->s_size)
- qp->s_cur = 0;
ret = 1;
+ goto unlock;
bail:
+ qp->s_flags &= ~IPATH_S_BUSY;
+unlock:
+ spin_unlock_irqrestore(&qp->s_lock, flags);
return ret;
}
@@ -506,8 +535,8 @@
/*
* Get the next work request entry to find where to put the data.
*/
- if (qp->r_reuse_sge)
- qp->r_reuse_sge = 0;
+ if (qp->r_flags & IPATH_R_REUSE_SGE)
+ qp->r_flags &= ~IPATH_R_REUSE_SGE;
else if (!ipath_get_rwqe(qp, 0)) {
/*
* Count VL15 packets dropped due to no receive buffer.
@@ -523,7 +552,7 @@
}
/* Silently drop packets which are too big. */
if (wc.byte_len > qp->r_len) {
- qp->r_reuse_sge = 1;
+ qp->r_flags |= IPATH_R_REUSE_SGE;
dev->n_pkt_drops++;
goto bail;
}
@@ -535,7 +564,8 @@
ipath_skip_sge(&qp->r_sge, sizeof(struct ib_grh));
ipath_copy_sge(&qp->r_sge, data,
wc.byte_len - sizeof(struct ib_grh));
- qp->r_wrid_valid = 0;
+ if (!test_and_clear_bit(IPATH_R_WRID_VALID, &qp->r_aflags))
+ goto bail;
wc.wr_id = qp->r_wr_id;
wc.status = IB_WC_SUCCESS;
wc.opcode = IB_WC_RECV;
diff --git a/drivers/infiniband/hw/ipath/ipath_user_sdma.h b/drivers/infiniband/hw/ipath/ipath_user_sdma.h
index e70946c..fc76316 100644
--- a/drivers/infiniband/hw/ipath/ipath_user_sdma.h
+++ b/drivers/infiniband/hw/ipath/ipath_user_sdma.h
@@ -45,8 +45,6 @@
int ipath_user_sdma_make_progress(struct ipath_devdata *dd,
struct ipath_user_sdma_queue *pq);
-int ipath_user_sdma_pkt_sent(const struct ipath_user_sdma_queue *pq,
- u32 counter);
void ipath_user_sdma_queue_drain(struct ipath_devdata *dd,
struct ipath_user_sdma_queue *pq);
diff --git a/drivers/infiniband/hw/ipath/ipath_verbs.c b/drivers/infiniband/hw/ipath/ipath_verbs.c
index 5015cd2..7779165 100644
--- a/drivers/infiniband/hw/ipath/ipath_verbs.c
+++ b/drivers/infiniband/hw/ipath/ipath_verbs.c
@@ -111,16 +111,24 @@
module_param_named(disable_sma, ib_ipath_disable_sma, uint, S_IWUSR | S_IRUGO);
MODULE_PARM_DESC(disable_sma, "Disable the SMA");
+/*
+ * Note that it is OK to post send work requests in the SQE and ERR
+ * states; ipath_do_send() will process them and generate error
+ * completions as per IB 1.2 C10-96.
+ */
const int ib_ipath_state_ops[IB_QPS_ERR + 1] = {
[IB_QPS_RESET] = 0,
[IB_QPS_INIT] = IPATH_POST_RECV_OK,
[IB_QPS_RTR] = IPATH_POST_RECV_OK | IPATH_PROCESS_RECV_OK,
[IB_QPS_RTS] = IPATH_POST_RECV_OK | IPATH_PROCESS_RECV_OK |
- IPATH_POST_SEND_OK | IPATH_PROCESS_SEND_OK,
+ IPATH_POST_SEND_OK | IPATH_PROCESS_SEND_OK |
+ IPATH_PROCESS_NEXT_SEND_OK,
[IB_QPS_SQD] = IPATH_POST_RECV_OK | IPATH_PROCESS_RECV_OK |
- IPATH_POST_SEND_OK,
- [IB_QPS_SQE] = IPATH_POST_RECV_OK | IPATH_PROCESS_RECV_OK,
- [IB_QPS_ERR] = 0,
+ IPATH_POST_SEND_OK | IPATH_PROCESS_SEND_OK,
+ [IB_QPS_SQE] = IPATH_POST_RECV_OK | IPATH_PROCESS_RECV_OK |
+ IPATH_POST_SEND_OK | IPATH_FLUSH_SEND,
+ [IB_QPS_ERR] = IPATH_POST_RECV_OK | IPATH_FLUSH_RECV |
+ IPATH_POST_SEND_OK | IPATH_FLUSH_SEND,
};
struct ipath_ucontext {
@@ -230,18 +238,6 @@
}
}
-static void ipath_flush_wqe(struct ipath_qp *qp, struct ib_send_wr *wr)
-{
- struct ib_wc wc;
-
- memset(&wc, 0, sizeof(wc));
- wc.wr_id = wr->wr_id;
- wc.status = IB_WC_WR_FLUSH_ERR;
- wc.opcode = ib_ipath_wc_opcode[wr->opcode];
- wc.qp = &qp->ibqp;
- ipath_cq_enter(to_icq(qp->ibqp.send_cq), &wc, 1);
-}
-
/*
* Count the number of DMA descriptors needed to send length bytes of data.
* Don't modify the ipath_sge_state to get the count.
@@ -347,14 +343,8 @@
spin_lock_irqsave(&qp->s_lock, flags);
/* Check that state is OK to post send. */
- if (unlikely(!(ib_ipath_state_ops[qp->state] & IPATH_POST_SEND_OK))) {
- if (qp->state != IB_QPS_SQE && qp->state != IB_QPS_ERR)
- goto bail_inval;
- /* C10-96 says generate a flushed completion entry. */
- ipath_flush_wqe(qp, wr);
- ret = 0;
- goto bail;
- }
+ if (unlikely(!(ib_ipath_state_ops[qp->state] & IPATH_POST_SEND_OK)))
+ goto bail_inval;
/* IB spec says that num_sge == 0 is OK. */
if (wr->num_sge > qp->s_max_sge)
@@ -677,6 +667,7 @@
static void ipath_ib_timer(struct ipath_ibdev *dev)
{
struct ipath_qp *resend = NULL;
+ struct ipath_qp *rnr = NULL;
struct list_head *last;
struct ipath_qp *qp;
unsigned long flags;
@@ -703,7 +694,9 @@
if (--qp->s_rnr_timeout == 0) {
do {
list_del_init(&qp->timerwait);
- tasklet_hi_schedule(&qp->s_task);
+ qp->timer_next = rnr;
+ rnr = qp;
+ atomic_inc(&qp->refcount);
if (list_empty(last))
break;
qp = list_entry(last->next, struct ipath_qp,
@@ -743,13 +736,15 @@
spin_unlock_irqrestore(&dev->pending_lock, flags);
/* XXX What if timer fires again while this is running? */
- for (qp = resend; qp != NULL; qp = qp->timer_next) {
- struct ib_wc wc;
+ while (resend != NULL) {
+ qp = resend;
+ resend = qp->timer_next;
spin_lock_irqsave(&qp->s_lock, flags);
- if (qp->s_last != qp->s_tail && qp->state == IB_QPS_RTS) {
+ if (qp->s_last != qp->s_tail &&
+ ib_ipath_state_ops[qp->state] & IPATH_PROCESS_SEND_OK) {
dev->n_timeouts++;
- ipath_restart_rc(qp, qp->s_last_psn + 1, &wc);
+ ipath_restart_rc(qp, qp->s_last_psn + 1);
}
spin_unlock_irqrestore(&qp->s_lock, flags);
@@ -757,6 +752,19 @@
if (atomic_dec_and_test(&qp->refcount))
wake_up(&qp->wait);
}
+ while (rnr != NULL) {
+ qp = rnr;
+ rnr = qp->timer_next;
+
+ spin_lock_irqsave(&qp->s_lock, flags);
+ if (ib_ipath_state_ops[qp->state] & IPATH_PROCESS_SEND_OK)
+ ipath_schedule_send(qp);
+ spin_unlock_irqrestore(&qp->s_lock, flags);
+
+ /* Notify ipath_destroy_qp() if it is waiting. */
+ if (atomic_dec_and_test(&qp->refcount))
+ wake_up(&qp->wait);
+ }
}
static void update_sge(struct ipath_sge_state *ss, u32 length)
@@ -1012,13 +1020,24 @@
struct ipath_verbs_txreq *tx = cookie;
struct ipath_qp *qp = tx->qp;
struct ipath_ibdev *dev = to_idev(qp->ibqp.device);
+ unsigned int flags;
+ enum ib_wc_status ibs = status == IPATH_SDMA_TXREQ_S_OK ?
+ IB_WC_SUCCESS : IB_WC_WR_FLUSH_ERR;
- /* Generate a completion queue entry if needed */
- if (qp->ibqp.qp_type != IB_QPT_RC && tx->wqe) {
- enum ib_wc_status ibs = status == IPATH_SDMA_TXREQ_S_OK ?
- IB_WC_SUCCESS : IB_WC_WR_FLUSH_ERR;
-
+ if (atomic_dec_and_test(&qp->s_dma_busy)) {
+ spin_lock_irqsave(&qp->s_lock, flags);
+ if (tx->wqe)
+ ipath_send_complete(qp, tx->wqe, ibs);
+ if ((ib_ipath_state_ops[qp->state] & IPATH_FLUSH_SEND &&
+ qp->s_last != qp->s_head) ||
+ (qp->s_flags & IPATH_S_WAIT_DMA))
+ ipath_schedule_send(qp);
+ spin_unlock_irqrestore(&qp->s_lock, flags);
+ wake_up(&qp->wait_dma);
+ } else if (tx->wqe) {
+ spin_lock_irqsave(&qp->s_lock, flags);
ipath_send_complete(qp, tx->wqe, ibs);
+ spin_unlock_irqrestore(&qp->s_lock, flags);
}
if (tx->txreq.flags & IPATH_SDMA_TXREQ_F_FREEBUF)
@@ -1029,6 +1048,21 @@
wake_up(&qp->wait);
}
+static void decrement_dma_busy(struct ipath_qp *qp)
+{
+ unsigned int flags;
+
+ if (atomic_dec_and_test(&qp->s_dma_busy)) {
+ spin_lock_irqsave(&qp->s_lock, flags);
+ if ((ib_ipath_state_ops[qp->state] & IPATH_FLUSH_SEND &&
+ qp->s_last != qp->s_head) ||
+ (qp->s_flags & IPATH_S_WAIT_DMA))
+ ipath_schedule_send(qp);
+ spin_unlock_irqrestore(&qp->s_lock, flags);
+ wake_up(&qp->wait_dma);
+ }
+}
+
/*
* Compute the number of clock cycles of delay before sending the next packet.
* The multipliers reflect the number of clocks for the fastest rate so
@@ -1067,9 +1101,12 @@
if (tx) {
qp->s_tx = NULL;
/* resend previously constructed packet */
+ atomic_inc(&qp->s_dma_busy);
ret = ipath_sdma_verbs_send(dd, tx->ss, tx->len, tx);
- if (ret)
+ if (ret) {
qp->s_tx = tx;
+ decrement_dma_busy(qp);
+ }
goto bail;
}
@@ -1120,12 +1157,14 @@
tx->txreq.sg_count = ndesc;
tx->map_len = (hdrwords + 2) << 2;
tx->txreq.map_addr = &tx->hdr;
+ atomic_inc(&qp->s_dma_busy);
ret = ipath_sdma_verbs_send(dd, ss, dwords, tx);
if (ret) {
/* save ss and length in dwords */
tx->ss = ss;
tx->len = dwords;
qp->s_tx = tx;
+ decrement_dma_busy(qp);
}
goto bail;
}
@@ -1146,6 +1185,7 @@
memcpy(piobuf, hdr, hdrwords << 2);
ipath_copy_from_sge(piobuf + hdrwords, ss, len);
+ atomic_inc(&qp->s_dma_busy);
ret = ipath_sdma_verbs_send(dd, NULL, 0, tx);
/*
* If we couldn't queue the DMA request, save the info
@@ -1156,6 +1196,7 @@
tx->ss = NULL;
tx->len = 0;
qp->s_tx = tx;
+ decrement_dma_busy(qp);
}
dev->n_unaligned++;
goto bail;
@@ -1179,6 +1220,7 @@
unsigned flush_wc;
u32 control;
int ret;
+ unsigned int flags;
piobuf = ipath_getpiobuf(dd, plen, NULL);
if (unlikely(piobuf == NULL)) {
@@ -1249,8 +1291,11 @@
}
copy_io(piobuf, ss, len, flush_wc);
done:
- if (qp->s_wqe)
+ if (qp->s_wqe) {
+ spin_lock_irqsave(&qp->s_lock, flags);
ipath_send_complete(qp, qp->s_wqe, IB_WC_SUCCESS);
+ spin_unlock_irqrestore(&qp->s_lock, flags);
+ }
ret = 0;
bail:
return ret;
@@ -1283,19 +1328,12 @@
* can defer SDMA restart until link goes ACTIVE without
* worrying about just how we got there.
*/
- if (qp->ibqp.qp_type == IB_QPT_SMI)
+ if (qp->ibqp.qp_type == IB_QPT_SMI ||
+ !(dd->ipath_flags & IPATH_HAS_SEND_DMA))
ret = ipath_verbs_send_pio(qp, hdr, hdrwords, ss, len,
plen, dwords);
- /* All non-VL15 packets are dropped if link is not ACTIVE */
- else if (!(dd->ipath_flags & IPATH_LINKACTIVE)) {
- if (qp->s_wqe)
- ipath_send_complete(qp, qp->s_wqe, IB_WC_SUCCESS);
- ret = 0;
- } else if (dd->ipath_flags & IPATH_HAS_SEND_DMA)
- ret = ipath_verbs_send_dma(qp, hdr, hdrwords, ss, len,
- plen, dwords);
else
- ret = ipath_verbs_send_pio(qp, hdr, hdrwords, ss, len,
+ ret = ipath_verbs_send_dma(qp, hdr, hdrwords, ss, len,
plen, dwords);
return ret;
@@ -1403,27 +1441,46 @@
* This is called from ipath_intr() at interrupt level when a PIO buffer is
* available after ipath_verbs_send() returned an error that no buffers were
* available. Return 1 if we consumed all the PIO buffers and we still have
- * QPs waiting for buffers (for now, just do a tasklet_hi_schedule and
+ * QPs waiting for buffers (for now, just restart the send tasklet and
* return zero).
*/
int ipath_ib_piobufavail(struct ipath_ibdev *dev)
{
+ struct list_head *list;
+ struct ipath_qp *qplist;
struct ipath_qp *qp;
unsigned long flags;
if (dev == NULL)
goto bail;
+ list = &dev->piowait;
+ qplist = NULL;
+
spin_lock_irqsave(&dev->pending_lock, flags);
- while (!list_empty(&dev->piowait)) {
- qp = list_entry(dev->piowait.next, struct ipath_qp,
- piowait);
+ while (!list_empty(list)) {
+ qp = list_entry(list->next, struct ipath_qp, piowait);
list_del_init(&qp->piowait);
- clear_bit(IPATH_S_BUSY, &qp->s_busy);
- tasklet_hi_schedule(&qp->s_task);
+ qp->pio_next = qplist;
+ qplist = qp;
+ atomic_inc(&qp->refcount);
}
spin_unlock_irqrestore(&dev->pending_lock, flags);
+ while (qplist != NULL) {
+ qp = qplist;
+ qplist = qp->pio_next;
+
+ spin_lock_irqsave(&qp->s_lock, flags);
+ if (ib_ipath_state_ops[qp->state] & IPATH_PROCESS_SEND_OK)
+ ipath_schedule_send(qp);
+ spin_unlock_irqrestore(&qp->s_lock, flags);
+
+ /* Notify ipath_destroy_qp() if it is waiting. */
+ if (atomic_dec_and_test(&qp->refcount))
+ wake_up(&qp->wait);
+ }
+
bail:
return 0;
}
@@ -1437,7 +1494,8 @@
props->device_cap_flags = IB_DEVICE_BAD_PKEY_CNTR |
IB_DEVICE_BAD_QKEY_CNTR | IB_DEVICE_SHUTDOWN_PORT |
- IB_DEVICE_SYS_IMAGE_GUID;
+ IB_DEVICE_SYS_IMAGE_GUID | IB_DEVICE_RC_RNR_NAK_GEN |
+ IB_DEVICE_PORT_ACTIVE_EVENT | IB_DEVICE_SRQ_RESIZE;
props->page_size_cap = PAGE_SIZE;
props->vendor_id = dev->dd->ipath_vendorid;
props->vendor_part_id = dev->dd->ipath_deviceid;
@@ -2145,11 +2203,12 @@
void ipath_unregister_ib_device(struct ipath_ibdev *dev)
{
struct ib_device *ibdev = &dev->ibdev;
-
- disable_timer(dev->dd);
+ u32 qps_inuse;
ib_unregister_device(ibdev);
+ disable_timer(dev->dd);
+
if (!list_empty(&dev->pending[0]) ||
!list_empty(&dev->pending[1]) ||
!list_empty(&dev->pending[2]))
@@ -2164,7 +2223,10 @@
* Note that ipath_unregister_ib_device() can be called before all
* the QPs are destroyed!
*/
- ipath_free_all_qps(&dev->qp_table);
+ qps_inuse = ipath_free_all_qps(&dev->qp_table);
+ if (qps_inuse)
+ ipath_dev_err(dev->dd, "QP memory leak! %u still in use\n",
+ qps_inuse);
kfree(dev->qp_table.table);
kfree(dev->lk_table.table);
kfree(dev->txreq_bufs);
@@ -2215,17 +2277,14 @@
"RC OTH NAKs %d\n"
"RC timeouts %d\n"
"RC RDMA dup %d\n"
- "RC stalls %d\n"
"piobuf wait %d\n"
- "no piobuf %d\n"
"unaligned %d\n"
"PKT drops %d\n"
"WQE errs %d\n",
dev->n_rc_resends, dev->n_rc_qacks, dev->n_rc_acks,
dev->n_seq_naks, dev->n_rdma_seq, dev->n_rnr_naks,
dev->n_other_naks, dev->n_timeouts,
- dev->n_rdma_dup_busy, dev->n_rc_stalls, dev->n_piowait,
- dev->n_no_piobuf, dev->n_unaligned,
+ dev->n_rdma_dup_busy, dev->n_piowait, dev->n_unaligned,
dev->n_pkt_drops, dev->n_wqe_errs);
for (i = 0; i < ARRAY_SIZE(dev->opstats); i++) {
const struct ipath_opcode_stats *si = &dev->opstats[i];
diff --git a/drivers/infiniband/hw/ipath/ipath_verbs.h b/drivers/infiniband/hw/ipath/ipath_verbs.h
index 6514aa8..9d12ae8 100644
--- a/drivers/infiniband/hw/ipath/ipath_verbs.h
+++ b/drivers/infiniband/hw/ipath/ipath_verbs.h
@@ -74,6 +74,11 @@
#define IPATH_POST_RECV_OK 0x02
#define IPATH_PROCESS_RECV_OK 0x04
#define IPATH_PROCESS_SEND_OK 0x08
+#define IPATH_PROCESS_NEXT_SEND_OK 0x10
+#define IPATH_FLUSH_SEND 0x20
+#define IPATH_FLUSH_RECV 0x40
+#define IPATH_PROCESS_OR_FLUSH_SEND \
+ (IPATH_PROCESS_SEND_OK | IPATH_FLUSH_SEND)
/* IB Performance Manager status values */
#define IB_PMA_SAMPLE_STATUS_DONE 0x00
@@ -353,12 +358,14 @@
struct ib_qp ibqp;
struct ipath_qp *next; /* link list for QPN hash table */
struct ipath_qp *timer_next; /* link list for ipath_ib_timer() */
+ struct ipath_qp *pio_next; /* link for ipath_ib_piobufavail() */
struct list_head piowait; /* link for wait PIO buf */
struct list_head timerwait; /* link for waiting for timeouts */
struct ib_ah_attr remote_ah_attr;
struct ipath_ib_header s_hdr; /* next packet header to send */
atomic_t refcount;
wait_queue_head_t wait;
+ wait_queue_head_t wait_dma;
struct tasklet_struct s_task;
struct ipath_mmap_info *ip;
struct ipath_sge_state *s_cur_sge;
@@ -369,7 +376,7 @@
struct ipath_sge_state s_rdma_read_sge;
struct ipath_sge_state r_sge; /* current receive data */
spinlock_t s_lock;
- unsigned long s_busy;
+ atomic_t s_dma_busy;
u16 s_pkt_delay;
u16 s_hdrwords; /* size of s_hdr in 32 bit words */
u32 s_cur_size; /* size of send packet in bytes */
@@ -383,6 +390,7 @@
u32 s_rnr_timeout; /* number of milliseconds for RNR timeout */
u32 r_ack_psn; /* PSN for next ACK or atomic ACK */
u64 r_wr_id; /* ID for current receive WQE */
+ unsigned long r_aflags;
u32 r_len; /* total length of r_sge */
u32 r_rcv_len; /* receive data len processed */
u32 r_psn; /* expected rcv packet sequence number */
@@ -394,8 +402,7 @@
u8 r_state; /* opcode of last packet received */
u8 r_nak_state; /* non-zero if NAK is pending */
u8 r_min_rnr_timer; /* retry timeout value for RNR NAKs */
- u8 r_reuse_sge; /* for UC receive errors */
- u8 r_wrid_valid; /* r_wrid set but CQ entry not yet made */
+ u8 r_flags;
u8 r_max_rd_atomic; /* max number of RDMA read/atomic to receive */
u8 r_head_ack_queue; /* index into s_ack_queue[] */
u8 qp_access_flags;
@@ -404,13 +411,13 @@
u8 s_rnr_retry_cnt;
u8 s_retry; /* requester retry counter */
u8 s_rnr_retry; /* requester RNR retry counter */
- u8 s_wait_credit; /* limit number of unacked packets sent */
u8 s_pkey_index; /* PKEY index to use */
u8 s_max_rd_atomic; /* max number of RDMA read/atomic to send */
u8 s_num_rd_atomic; /* number of RDMA read/atomic pending */
u8 s_tail_ack_queue; /* index into s_ack_queue[] */
u8 s_flags;
u8 s_dmult;
+ u8 s_draining;
u8 timeout; /* Timeout for this QP */
enum ib_mtu path_mtu;
u32 remote_qpn;
@@ -428,16 +435,40 @@
struct ipath_sge r_sg_list[0]; /* verified SGEs */
};
-/* Bit definition for s_busy. */
-#define IPATH_S_BUSY 0
+/*
+ * Atomic bit definitions for r_aflags.
+ */
+#define IPATH_R_WRID_VALID 0
+
+/*
+ * Bit definitions for r_flags.
+ */
+#define IPATH_R_REUSE_SGE 0x01
+#define IPATH_R_RDMAR_SEQ 0x02
/*
* Bit definitions for s_flags.
+ *
+ * IPATH_S_FENCE_PENDING - waiting for all prior RDMA read or atomic SWQEs
+ * before processing the next SWQE
+ * IPATH_S_RDMAR_PENDING - waiting for any RDMA read or atomic SWQEs
+ * before processing the next SWQE
+ * IPATH_S_WAITING - waiting for RNR timeout or send buffer available.
+ * IPATH_S_WAIT_SSN_CREDIT - waiting for RC credits to process next SWQE
+ * IPATH_S_WAIT_DMA - waiting for send DMA queue to drain before generating
+ * next send completion entry not via send DMA.
*/
#define IPATH_S_SIGNAL_REQ_WR 0x01
#define IPATH_S_FENCE_PENDING 0x02
#define IPATH_S_RDMAR_PENDING 0x04
#define IPATH_S_ACK_PENDING 0x08
+#define IPATH_S_BUSY 0x10
+#define IPATH_S_WAITING 0x20
+#define IPATH_S_WAIT_SSN_CREDIT 0x40
+#define IPATH_S_WAIT_DMA 0x80
+
+#define IPATH_S_ANY_WAIT (IPATH_S_FENCE_PENDING | IPATH_S_RDMAR_PENDING | \
+ IPATH_S_WAITING | IPATH_S_WAIT_SSN_CREDIT | IPATH_S_WAIT_DMA)
#define IPATH_PSN_CREDIT 512
@@ -573,13 +604,11 @@
u32 n_rnr_naks;
u32 n_other_naks;
u32 n_timeouts;
- u32 n_rc_stalls;
u32 n_pkt_drops;
u32 n_vl15_dropped;
u32 n_wqe_errs;
u32 n_rdma_dup_busy;
u32 n_piowait;
- u32 n_no_piobuf;
u32 n_unaligned;
u32 port_cap_flags;
u32 pma_sample_start;
@@ -657,6 +686,17 @@
return container_of(ibdev, struct ipath_ibdev, ibdev);
}
+/*
+ * This must be called with s_lock held.
+ */
+static inline void ipath_schedule_send(struct ipath_qp *qp)
+{
+ if (qp->s_flags & IPATH_S_ANY_WAIT)
+ qp->s_flags &= ~IPATH_S_ANY_WAIT;
+ if (!(qp->s_flags & IPATH_S_BUSY))
+ tasklet_hi_schedule(&qp->s_task);
+}
+
int ipath_process_mad(struct ib_device *ibdev,
int mad_flags,
u8 port_num,
@@ -706,12 +746,10 @@
int ipath_query_qp(struct ib_qp *ibqp, struct ib_qp_attr *attr,
int attr_mask, struct ib_qp_init_attr *init_attr);
-void ipath_free_all_qps(struct ipath_qp_table *qpt);
+unsigned ipath_free_all_qps(struct ipath_qp_table *qpt);
int ipath_init_qp_table(struct ipath_ibdev *idev, int size);
-void ipath_sqerror_qp(struct ipath_qp *qp, struct ib_wc *wc);
-
void ipath_get_credit(struct ipath_qp *qp, u32 aeth);
unsigned ipath_ib_rate_to_mult(enum ib_rate rate);
@@ -729,7 +767,9 @@
void ipath_rc_rcv(struct ipath_ibdev *dev, struct ipath_ib_header *hdr,
int has_grh, void *data, u32 tlen, struct ipath_qp *qp);
-void ipath_restart_rc(struct ipath_qp *qp, u32 psn, struct ib_wc *wc);
+void ipath_restart_rc(struct ipath_qp *qp, u32 psn);
+
+void ipath_rc_error(struct ipath_qp *qp, enum ib_wc_status err);
int ipath_post_ud_send(struct ipath_qp *qp, struct ib_send_wr *wr);
diff --git a/drivers/infiniband/hw/mlx4/qp.c b/drivers/infiniband/hw/mlx4/qp.c
index 8e02ecf..a80df22 100644
--- a/drivers/infiniband/hw/mlx4/qp.c
+++ b/drivers/infiniband/hw/mlx4/qp.c
@@ -333,6 +333,9 @@
cap->max_inline_data + sizeof (struct mlx4_wqe_inline_seg)) +
send_wqe_overhead(type, qp->flags);
+ if (s > dev->dev->caps.max_sq_desc_sz)
+ return -EINVAL;
+
/*
* Hermon supports shrinking WQEs, such that a single work
* request can include multiple units of 1 << wqe_shift. This
@@ -372,9 +375,6 @@
qp->sq.wqe_shift = ilog2(roundup_pow_of_two(s));
for (;;) {
- if (1 << qp->sq.wqe_shift > dev->dev->caps.max_sq_desc_sz)
- return -EINVAL;
-
qp->sq_max_wqes_per_wr = DIV_ROUND_UP(s, 1U << qp->sq.wqe_shift);
/*
@@ -395,7 +395,8 @@
++qp->sq.wqe_shift;
}
- qp->sq.max_gs = ((qp->sq_max_wqes_per_wr << qp->sq.wqe_shift) -
+ qp->sq.max_gs = (min(dev->dev->caps.max_sq_desc_sz,
+ (qp->sq_max_wqes_per_wr << qp->sq.wqe_shift)) -
send_wqe_overhead(type, qp->flags)) /
sizeof (struct mlx4_wqe_data_seg);
@@ -411,7 +412,9 @@
cap->max_send_wr = qp->sq.max_post =
(qp->sq.wqe_cnt - qp->sq_spare_wqes) / qp->sq_max_wqes_per_wr;
- cap->max_send_sge = qp->sq.max_gs;
+ cap->max_send_sge = min(qp->sq.max_gs,
+ min(dev->dev->caps.max_sq_sg,
+ dev->dev->caps.max_rq_sg));
/* We don't support inline sends for kernel QPs (yet) */
cap->max_inline_data = 0;
@@ -1457,7 +1460,7 @@
unsigned ind;
int uninitialized_var(stamp);
int uninitialized_var(size);
- unsigned seglen;
+ unsigned uninitialized_var(seglen);
int i;
spin_lock_irqsave(&qp->sq.lock, flags);
diff --git a/drivers/infiniband/hw/mthca/mthca_main.c b/drivers/infiniband/hw/mthca/mthca_main.c
index 9ebadd6..200cf13f 100644
--- a/drivers/infiniband/hw/mthca/mthca_main.c
+++ b/drivers/infiniband/hw/mthca/mthca_main.c
@@ -45,6 +45,7 @@
#include "mthca_cmd.h"
#include "mthca_profile.h"
#include "mthca_memfree.h"
+#include "mthca_wqe.h"
MODULE_AUTHOR("Roland Dreier");
MODULE_DESCRIPTION("Mellanox InfiniBand HCA low-level driver");
@@ -200,7 +201,18 @@
mdev->limits.gid_table_len = dev_lim->max_gids;
mdev->limits.pkey_table_len = dev_lim->max_pkeys;
mdev->limits.local_ca_ack_delay = dev_lim->local_ca_ack_delay;
- mdev->limits.max_sg = dev_lim->max_sg;
+ /*
+ * Need to allow for worst case send WQE overhead and check
+ * whether max_desc_sz imposes a lower limit than max_sg; UD
+ * send has the biggest overhead.
+ */
+ mdev->limits.max_sg = min_t(int, dev_lim->max_sg,
+ (dev_lim->max_desc_sz -
+ sizeof (struct mthca_next_seg) -
+ (mthca_is_memfree(mdev) ?
+ sizeof (struct mthca_arbel_ud_seg) :
+ sizeof (struct mthca_tavor_ud_seg))) /
+ sizeof (struct mthca_data_seg));
mdev->limits.max_wqes = dev_lim->max_qp_sz;
mdev->limits.max_qp_init_rdma = dev_lim->max_requester_per_qp;
mdev->limits.reserved_qps = dev_lim->reserved_qps;
diff --git a/drivers/infiniband/hw/nes/nes.c b/drivers/infiniband/hw/nes/nes.c
index 9f7364a..a4e9269 100644
--- a/drivers/infiniband/hw/nes/nes.c
+++ b/drivers/infiniband/hw/nes/nes.c
@@ -91,10 +91,6 @@
module_param_named(debug_level, nes_debug_level, uint, 0644);
MODULE_PARM_DESC(debug_level, "Enable debug output level");
-unsigned int nes_lro_max_aggr = NES_LRO_MAX_AGGR;
-module_param(nes_lro_max_aggr, int, NES_LRO_MAX_AGGR);
-MODULE_PARM_DESC(nes_mro_max_aggr, " nic LRO MAX packet aggregation");
-
LIST_HEAD(nes_adapter_list);
static LIST_HEAD(nes_dev_list);
diff --git a/drivers/infiniband/hw/nes/nes.h b/drivers/infiniband/hw/nes/nes.h
index 1f9f7bf..61b46e9 100644
--- a/drivers/infiniband/hw/nes/nes.h
+++ b/drivers/infiniband/hw/nes/nes.h
@@ -173,7 +173,6 @@
extern unsigned int send_first;
extern unsigned int nes_drv_opt;
extern unsigned int nes_debug_level;
-extern unsigned int nes_lro_max_aggr;
extern struct list_head nes_adapter_list;
diff --git a/drivers/infiniband/hw/nes/nes_hw.c b/drivers/infiniband/hw/nes/nes_hw.c
index 8dc70f9..d3278f1 100644
--- a/drivers/infiniband/hw/nes/nes_hw.c
+++ b/drivers/infiniband/hw/nes/nes_hw.c
@@ -42,6 +42,10 @@
#include "nes.h"
+static unsigned int nes_lro_max_aggr = NES_LRO_MAX_AGGR;
+module_param(nes_lro_max_aggr, uint, 0444);
+MODULE_PARM_DESC(nes_lro_max_aggr, "NIC LRO max packet aggregation");
+
static u32 crit_err_count;
u32 int_mod_timer_init;
u32 int_mod_cq_depth_256;
@@ -1738,7 +1742,7 @@
jumbomode = 1;
nes_nic_init_timer_defaults(nesdev, jumbomode);
}
- nesvnic->lro_mgr.max_aggr = NES_LRO_MAX_AGGR;
+ nesvnic->lro_mgr.max_aggr = nes_lro_max_aggr;
nesvnic->lro_mgr.max_desc = NES_MAX_LRO_DESCRIPTORS;
nesvnic->lro_mgr.lro_arr = nesvnic->lro_desc;
nesvnic->lro_mgr.get_skb_header = nes_lro_get_skb_hdr;
diff --git a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c
index d00a2c1..3f663fb 100644
--- a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c
+++ b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c
@@ -194,7 +194,13 @@
/* Set the cached Q_Key before we attach if it's the broadcast group */
if (!memcmp(mcast->mcmember.mgid.raw, priv->dev->broadcast + 4,
sizeof (union ib_gid))) {
+ spin_lock_irq(&priv->lock);
+ if (!priv->broadcast) {
+ spin_unlock_irq(&priv->lock);
+ return -EAGAIN;
+ }
priv->qkey = be32_to_cpu(priv->broadcast->mcmember.qkey);
+ spin_unlock_irq(&priv->lock);
priv->tx_wr.wr.ud.remote_qkey = priv->qkey;
}
diff --git a/drivers/input/keyboard/aaed2000_kbd.c b/drivers/input/keyboard/aaed2000_kbd.c
index a293e8b..8a77bfc 100644
--- a/drivers/input/keyboard/aaed2000_kbd.c
+++ b/drivers/input/keyboard/aaed2000_kbd.c
@@ -183,4 +183,4 @@
MODULE_AUTHOR("Nicolas Bellido Y Ortega");
MODULE_DESCRIPTION("AAED-2000 Keyboard Driver");
-MODULE_LICENSE("GPLv2");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c
index 4a95adc..af58a6f 100644
--- a/drivers/input/keyboard/atkbd.c
+++ b/drivers/input/keyboard/atkbd.c
@@ -807,6 +807,8 @@
static void atkbd_cleanup(struct serio *serio)
{
struct atkbd *atkbd = serio_get_drvdata(serio);
+
+ atkbd_disable(atkbd);
ps2_command(&atkbd->ps2dev, NULL, ATKBD_CMD_RESET_BAT);
}
diff --git a/drivers/input/keyboard/corgikbd.c b/drivers/input/keyboard/corgikbd.c
index 29fbec6..1aa46ae 100644
--- a/drivers/input/keyboard/corgikbd.c
+++ b/drivers/input/keyboard/corgikbd.c
@@ -412,5 +412,5 @@
MODULE_AUTHOR("Richard Purdie <rpurdie@rpsys.net>");
MODULE_DESCRIPTION("Corgi Keyboard Driver");
-MODULE_LICENSE("GPLv2");
+MODULE_LICENSE("GPL v2");
MODULE_ALIAS("platform:corgi-keyboard");
diff --git a/drivers/input/keyboard/hilkbd.c b/drivers/input/keyboard/hilkbd.c
index 50d80ec..aacf71f 100644
--- a/drivers/input/keyboard/hilkbd.c
+++ b/drivers/input/keyboard/hilkbd.c
@@ -217,6 +217,10 @@
return -ENOMEM;
#if defined(CONFIG_HP300)
+ if (!MACH_IS_HP300) {
+ err = -ENODEV;
+ goto err1;
+ }
if (!hwreg_present((void *)(HILBASE + HIL_DATA))) {
printk(KERN_ERR "HIL: hardware register was not found\n");
err = -ENODEV;
diff --git a/drivers/input/keyboard/jornada680_kbd.c b/drivers/input/keyboard/jornada680_kbd.c
index 9387da3..781fc61 100644
--- a/drivers/input/keyboard/jornada680_kbd.c
+++ b/drivers/input/keyboard/jornada680_kbd.c
@@ -275,5 +275,5 @@
MODULE_AUTHOR("Kristoffer Ericson <kristoffer.ericson@gmail.com>");
MODULE_DESCRIPTION("HP Jornada 620/660/680/690 Keyboard Driver");
-MODULE_LICENSE("GPLv2");
+MODULE_LICENSE("GPL v2");
MODULE_ALIAS("platform:jornada680_kbd");
diff --git a/drivers/input/keyboard/jornada720_kbd.c b/drivers/input/keyboard/jornada720_kbd.c
index a1164a0..ce650af 100644
--- a/drivers/input/keyboard/jornada720_kbd.c
+++ b/drivers/input/keyboard/jornada720_kbd.c
@@ -29,7 +29,7 @@
MODULE_AUTHOR("Kristoffer Ericson <Kristoffer.Ericson@gmail.com>");
MODULE_DESCRIPTION("HP Jornada 710/720/728 keyboard driver");
-MODULE_LICENSE("GPLv2");
+MODULE_LICENSE("GPL v2");
static unsigned short jornada_std_keymap[128] = { /* ROW */
0, KEY_ESC, KEY_F1, KEY_F2, KEY_F3, KEY_F4, KEY_F5, KEY_F6, KEY_F7, /* #1 */
diff --git a/drivers/input/keyboard/pxa27x_keypad.c b/drivers/input/keyboard/pxa27x_keypad.c
index 3dea0c5..45767e7 100644
--- a/drivers/input/keyboard/pxa27x_keypad.c
+++ b/drivers/input/keyboard/pxa27x_keypad.c
@@ -136,6 +136,9 @@
set_bit(code, input_dev->keybit);
}
+ for (i = 0; i < pdata->direct_key_num; i++)
+ set_bit(pdata->direct_key_map[i], input_dev->keybit);
+
keypad->rotary_up_key[0] = pdata->rotary0_up_key;
keypad->rotary_up_key[1] = pdata->rotary1_up_key;
keypad->rotary_down_key[0] = pdata->rotary0_down_key;
@@ -143,17 +146,21 @@
keypad->rotary_rel_code[0] = pdata->rotary0_rel_code;
keypad->rotary_rel_code[1] = pdata->rotary1_rel_code;
- if (pdata->rotary0_up_key && pdata->rotary0_down_key) {
- set_bit(pdata->rotary0_up_key, input_dev->keybit);
- set_bit(pdata->rotary0_down_key, input_dev->keybit);
- } else
- set_bit(pdata->rotary0_rel_code, input_dev->relbit);
+ if (pdata->enable_rotary0) {
+ if (pdata->rotary0_up_key && pdata->rotary0_down_key) {
+ set_bit(pdata->rotary0_up_key, input_dev->keybit);
+ set_bit(pdata->rotary0_down_key, input_dev->keybit);
+ } else
+ set_bit(pdata->rotary0_rel_code, input_dev->relbit);
+ }
- if (pdata->rotary1_up_key && pdata->rotary1_down_key) {
- set_bit(pdata->rotary1_up_key, input_dev->keybit);
- set_bit(pdata->rotary1_down_key, input_dev->keybit);
- } else
- set_bit(pdata->rotary1_rel_code, input_dev->relbit);
+ if (pdata->enable_rotary1) {
+ if (pdata->rotary1_up_key && pdata->rotary1_down_key) {
+ set_bit(pdata->rotary1_up_key, input_dev->keybit);
+ set_bit(pdata->rotary1_down_key, input_dev->keybit);
+ } else
+ set_bit(pdata->rotary1_rel_code, input_dev->relbit);
+ }
}
static inline unsigned int lookup_matrix_keycode(
@@ -484,8 +491,13 @@
keypad->input_dev = input_dev;
input_set_drvdata(input_dev, keypad);
- input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP) |
- BIT_MASK(EV_REL);
+ input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP);
+ if ((keypad->pdata->enable_rotary0 &&
+ keypad->pdata->rotary0_rel_code) ||
+ (keypad->pdata->enable_rotary1 &&
+ keypad->pdata->rotary1_rel_code)) {
+ input_dev->evbit[0] |= BIT_MASK(EV_REL);
+ }
pxa27x_keypad_build_keycode(keypad);
platform_set_drvdata(pdev, keypad);
diff --git a/drivers/input/keyboard/spitzkbd.c b/drivers/input/keyboard/spitzkbd.c
index 61e401b..1aa3718 100644
--- a/drivers/input/keyboard/spitzkbd.c
+++ b/drivers/input/keyboard/spitzkbd.c
@@ -494,5 +494,5 @@
MODULE_AUTHOR("Richard Purdie <rpurdie@rpsys.net>");
MODULE_DESCRIPTION("Spitz Keyboard Driver");
-MODULE_LICENSE("GPLv2");
+MODULE_LICENSE("GPL v2");
MODULE_ALIAS("platform:spitz-keyboard");
diff --git a/drivers/input/misc/apanel.c b/drivers/input/misc/apanel.c
index 9531d8c..d82f7f7 100644
--- a/drivers/input/misc/apanel.c
+++ b/drivers/input/misc/apanel.c
@@ -20,7 +20,6 @@
#include <linux/module.h>
#include <linux/ioport.h>
#include <linux/io.h>
-#include <linux/module.h>
#include <linux/input-polldev.h>
#include <linux/i2c.h>
#include <linux/workqueue.h>
diff --git a/drivers/input/misc/hp_sdc_rtc.c b/drivers/input/misc/hp_sdc_rtc.c
index ab76ea4..45e5d05 100644
--- a/drivers/input/misc/hp_sdc_rtc.c
+++ b/drivers/input/misc/hp_sdc_rtc.c
@@ -691,6 +691,11 @@
{
int ret;
+#ifdef __mc68000__
+ if (!MACH_IS_HP300)
+ return -ENODEV;
+#endif
+
init_MUTEX(&i8042tregs);
if ((ret = hp_sdc_request_timer_irq(&hp_sdc_rtc_isr)))
diff --git a/drivers/input/serio/hp_sdc_mlc.c b/drivers/input/serio/hp_sdc_mlc.c
index f1fd3b6..587398f 100644
--- a/drivers/input/serio/hp_sdc_mlc.c
+++ b/drivers/input/serio/hp_sdc_mlc.c
@@ -306,6 +306,11 @@
{
hil_mlc *mlc = &hp_sdc_mlc;
+#ifdef __mc68000__
+ if (!MACH_IS_HP300)
+ return -ENODEV;
+#endif
+
printk(KERN_INFO PREFIX "Registering the System Domain Controller's HIL MLC.\n");
hp_sdc_mlc_priv.emtestmode = 0;
diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h
index 5ece9f5..9aafa96 100644
--- a/drivers/input/serio/i8042-x86ia64io.h
+++ b/drivers/input/serio/i8042-x86ia64io.h
@@ -331,6 +331,13 @@
},
},
{
+ .ident = "Acer TravelMate 660",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 660"),
+ },
+ },
+ {
.ident = "Acer TravelMate 2490",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c
index 65a74cf..592ff55 100644
--- a/drivers/input/serio/i8042.c
+++ b/drivers/input/serio/i8042.c
@@ -885,6 +885,20 @@
#undef DELAY
+#ifdef CONFIG_X86
+static void i8042_dritek_enable(void)
+{
+ char param = 0x90;
+ int error;
+
+ error = i8042_command(¶m, 0x1059);
+ if (error)
+ printk(KERN_WARNING
+ "Failed to enable DRITEK extension: %d\n",
+ error);
+}
+#endif
+
#ifdef CONFIG_PM
/*
* Here we try to restore the original BIOS settings. We only want to
@@ -942,6 +956,12 @@
return -EIO;
}
+
+#ifdef CONFIG_X86
+ if (i8042_dritek)
+ i8042_dritek_enable();
+#endif
+
if (i8042_mux_present) {
if (i8042_set_mux_mode(1, NULL) || i8042_enable_mux_ports())
printk(KERN_WARNING
@@ -1160,6 +1180,11 @@
if (error)
return error;
+#ifdef CONFIG_X86
+ if (i8042_dritek)
+ i8042_dritek_enable();
+#endif
+
if (!i8042_noaux) {
error = i8042_setup_aux();
if (error && error != -ENODEV && error != -EBUSY)
@@ -1171,14 +1196,6 @@
if (error)
goto out_fail;
}
-#ifdef CONFIG_X86
- if (i8042_dritek) {
- char param = 0x90;
- error = i8042_command(¶m, 0x1059);
- if (error)
- goto out_fail;
- }
-#endif
/*
* Ok, everything is ready, let's register all serio ports
*/
diff --git a/drivers/input/serio/q40kbd.c b/drivers/input/serio/q40kbd.c
index cb89aff..d962a8d 100644
--- a/drivers/input/serio/q40kbd.c
+++ b/drivers/input/serio/q40kbd.c
@@ -156,7 +156,7 @@
int error;
if (!MACH_IS_Q40)
- return -EIO;
+ return -ENODEV;
error = platform_driver_register(&q40kbd_driver);
if (error)
diff --git a/drivers/input/tablet/gtco.c b/drivers/input/tablet/gtco.c
index c5a8661..1e748e4 100644
--- a/drivers/input/tablet/gtco.c
+++ b/drivers/input/tablet/gtco.c
@@ -830,7 +830,7 @@
struct gtco *gtco;
struct input_dev *input_dev;
struct hid_descriptor *hid_desc;
- char *report = NULL;
+ char *report;
int result = 0, retry;
int error;
struct usb_endpoint_descriptor *endpoint;
@@ -916,12 +916,16 @@
le16_to_cpu(hid_desc->wDescriptorLength),
5000); /* 5 secs */
- if (result == le16_to_cpu(hid_desc->wDescriptorLength))
+ dbg("usb_control_msg result: %d", result);
+ if (result == le16_to_cpu(hid_desc->wDescriptorLength)) {
+ parse_hid_report_descriptor(gtco, report, result);
break;
+ }
}
+ kfree(report);
+
/* If we didn't get the report, fail */
- dbg("usb_control_msg result: :%d", result);
if (result != le16_to_cpu(hid_desc->wDescriptorLength)) {
err("Failed to get HID Report Descriptor of size: %d",
hid_desc->wDescriptorLength);
@@ -929,12 +933,6 @@
goto err_free_urb;
}
- /* Now we parse the report */
- parse_hid_report_descriptor(gtco, report, result);
-
- /* Now we delete it */
- kfree(report);
-
/* Create a device file node */
usb_make_path(gtco->usbdev, gtco->usbpath, sizeof(gtco->usbpath));
strlcat(gtco->usbpath, "/input0", sizeof(gtco->usbpath));
@@ -988,7 +986,6 @@
usb_buffer_free(gtco->usbdev, REPORT_MAX_SIZE,
gtco->buffer, gtco->buf_dma);
err_free_devs:
- kfree(report);
input_free_device(input_dev);
kfree(gtco);
return error;
diff --git a/drivers/input/touchscreen/jornada720_ts.c b/drivers/input/touchscreen/jornada720_ts.c
index 7422421..1aca108 100644
--- a/drivers/input/touchscreen/jornada720_ts.c
+++ b/drivers/input/touchscreen/jornada720_ts.c
@@ -24,7 +24,7 @@
MODULE_AUTHOR("Kristoffer Ericson <kristoffer.ericson@gmail.com>");
MODULE_DESCRIPTION("HP Jornada 710/720/728 touchscreen driver");
-MODULE_LICENSE("GPLv2");
+MODULE_LICENSE("GPL v2");
struct jornada_ts {
struct input_dev *dev;
diff --git a/drivers/input/touchscreen/wm9713.c b/drivers/input/touchscreen/wm9713.c
index 01278bd..8384587 100644
--- a/drivers/input/touchscreen/wm9713.c
+++ b/drivers/input/touchscreen/wm9713.c
@@ -85,6 +85,15 @@
MODULE_PARM_DESC(delay, "Set adc sample delay.");
/*
+ * Set five_wire = 1 to use a 5 wire touchscreen.
+ *
+ * NOTE: Five wire mode does not allow for readback of pressure.
+ */
+static int five_wire;
+module_param(five_wire, int, 0);
+MODULE_PARM_DESC(five_wire, "Set to '1' to use 5-wire touchscreen.");
+
+/*
* Set adc mask function.
*
* Sources of glitch noise, such as signals driving an LCD display, may feed
@@ -162,6 +171,19 @@
64000 / rpu);
}
+ /* Five wire panel? */
+ if (five_wire) {
+ dig3 |= WM9713_45W;
+ dev_info(wm->dev, "setting 5-wire touchscreen mode.");
+
+ if (pil) {
+ dev_warn(wm->dev,
+ "Pressure measurement not supported in 5 "
+ "wire mode, disabling\n");
+ pil = 0;
+ }
+ }
+
/* touchpanel pressure */
if (pil == 2) {
dig3 |= WM9712_PIL;
diff --git a/drivers/input/touchscreen/wm97xx-core.c b/drivers/input/touchscreen/wm97xx-core.c
index e9c7ea4..cdc24ad 100644
--- a/drivers/input/touchscreen/wm97xx-core.c
+++ b/drivers/input/touchscreen/wm97xx-core.c
@@ -608,6 +608,17 @@
goto alloc_err;
}
+ /* set up physical characteristics */
+ wm->codec->phy_init(wm);
+
+ /* load gpio cache */
+ wm->gpio[0] = wm97xx_reg_read(wm, AC97_GPIO_CFG);
+ wm->gpio[1] = wm97xx_reg_read(wm, AC97_GPIO_POLARITY);
+ wm->gpio[2] = wm97xx_reg_read(wm, AC97_GPIO_STICKY);
+ wm->gpio[3] = wm97xx_reg_read(wm, AC97_GPIO_WAKEUP);
+ wm->gpio[4] = wm97xx_reg_read(wm, AC97_GPIO_STATUS);
+ wm->gpio[5] = wm97xx_reg_read(wm, AC97_MISC_AFE);
+
wm->input_dev = input_allocate_device();
if (wm->input_dev == NULL) {
ret = -ENOMEM;
@@ -616,6 +627,7 @@
/* set up touch configuration */
wm->input_dev->name = "wm97xx touchscreen";
+ wm->input_dev->phys = "wm97xx";
wm->input_dev->open = wm97xx_ts_input_open;
wm->input_dev->close = wm97xx_ts_input_close;
set_bit(EV_ABS, wm->input_dev->evbit);
@@ -634,17 +646,6 @@
if (ret < 0)
goto dev_alloc_err;
- /* set up physical characteristics */
- wm->codec->phy_init(wm);
-
- /* load gpio cache */
- wm->gpio[0] = wm97xx_reg_read(wm, AC97_GPIO_CFG);
- wm->gpio[1] = wm97xx_reg_read(wm, AC97_GPIO_POLARITY);
- wm->gpio[2] = wm97xx_reg_read(wm, AC97_GPIO_STICKY);
- wm->gpio[3] = wm97xx_reg_read(wm, AC97_GPIO_WAKEUP);
- wm->gpio[4] = wm97xx_reg_read(wm, AC97_GPIO_STATUS);
- wm->gpio[5] = wm97xx_reg_read(wm, AC97_MISC_AFE);
-
/* register our battery device */
wm->battery_dev = platform_device_alloc("wm97xx-battery", -1);
if (!wm->battery_dev) {
@@ -801,7 +802,7 @@
EXPORT_SYMBOL_GPL(wm97xx_unregister_mach_ops);
static struct device_driver wm97xx_driver = {
- .name = "ac97",
+ .name = "wm97xx-ts",
.bus = &ac97_bus_type,
.owner = THIS_MODULE,
.probe = wm97xx_probe,
diff --git a/drivers/isdn/capi/capiutil.c b/drivers/isdn/capi/capiutil.c
index ebef4ce..29419a8 100644
--- a/drivers/isdn/capi/capiutil.c
+++ b/drivers/isdn/capi/capiutil.c
@@ -948,17 +948,17 @@
{
g_cmsg= kmalloc(sizeof(_cmsg), GFP_KERNEL);
if (!g_cmsg)
- return ENOMEM;
+ return -ENOMEM;
g_debbuf = kmalloc(sizeof(_cdebbuf), GFP_KERNEL);
if (!g_debbuf) {
kfree(g_cmsg);
- return ENOMEM;
+ return -ENOMEM;
}
g_debbuf->buf = kmalloc(CDEBUG_GSIZE, GFP_KERNEL);
if (!g_debbuf->buf) {
kfree(g_cmsg);
kfree(g_debbuf);
- return ENOMEM;;
+ return -ENOMEM;;
}
g_debbuf->size = CDEBUG_GSIZE;
g_debbuf->buf[0] = 0;
diff --git a/drivers/isdn/hardware/eicon/divasmain.c b/drivers/isdn/hardware/eicon/divasmain.c
index 5fcbdcc..16a874b 100644
--- a/drivers/isdn/hardware/eicon/divasmain.c
+++ b/drivers/isdn/hardware/eicon/divasmain.c
@@ -806,7 +806,6 @@
if (!create_divas_proc()) {
#ifdef MODULE
- remove_divas_proc();
divas_unregister_chrdev();
divasfunc_exit();
#endif
diff --git a/drivers/isdn/hardware/eicon/divasproc.c b/drivers/isdn/hardware/eicon/divasproc.c
index fae8958..0408272 100644
--- a/drivers/isdn/hardware/eicon/divasproc.c
+++ b/drivers/isdn/hardware/eicon/divasproc.c
@@ -125,8 +125,8 @@
int create_divas_proc(void)
{
- proc_create(divas_proc_name, S_IFREG | S_IRUGO, proc_net_eicon,
- &divas_fops);
+ divas_proc_entry = proc_create(divas_proc_name, S_IFREG | S_IRUGO,
+ proc_net_eicon, &divas_fops);
if (!divas_proc_entry)
return (0);
diff --git a/drivers/isdn/hysdn/Kconfig b/drivers/isdn/hysdn/Kconfig
index c6d8a70..c9e4231 100644
--- a/drivers/isdn/hysdn/Kconfig
+++ b/drivers/isdn/hysdn/Kconfig
@@ -3,7 +3,7 @@
#
config HYSDN
tristate "Hypercope HYSDN cards (Champ, Ergo, Metro) support (module only)"
- depends on m && PROC_FS && PCI && BROKEN_ON_SMP
+ depends on m && PROC_FS && PCI
help
Say Y here if you have one of Hypercope's active PCI ISDN cards
Champ, Ergo and Metro. You will then get a module called hysdn.
diff --git a/drivers/isdn/hysdn/boardergo.c b/drivers/isdn/hysdn/boardergo.c
index 6cdbad3..3eb096f 100644
--- a/drivers/isdn/hysdn/boardergo.c
+++ b/drivers/isdn/hysdn/boardergo.c
@@ -64,10 +64,11 @@
} /* ergo_interrupt */
/******************************************************************************/
-/* ergo_irq_bh is the function called by the immediate kernel task list after */
-/* being activated with queue_task and no interrupts active. This task is the */
-/* only one handling data transfer from or to the card after booting. The task */
-/* may be queued from everywhere (interrupts included). */
+/* ergo_irq_bh will be called as part of the kernel clearing its shared work */
+/* queue sometime after a call to schedule_work has been made passing our */
+/* work_struct. This task is the only one handling data transfer from or to */
+/* the card after booting. The task may be queued from everywhere */
+/* (interrupts included). */
/******************************************************************************/
static void
ergo_irq_bh(struct work_struct *ugli_api)
@@ -90,7 +91,6 @@
card->hw_lock = 1; /* we now lock the hardware */
do {
- sti(); /* reenable other ints */
again = 0; /* assume loop not to be repeated */
if (!dpr->ToHyFlag) {
@@ -110,7 +110,6 @@
again = 1; /* restart loop */
}
} /* a message has arrived for us */
- cli(); /* no further ints */
if (again) {
dpr->ToHyInt = 1;
dpr->ToPcInt = 1; /* interrupt to E1 for all cards */
@@ -242,7 +241,6 @@
byteout(card->iobase + PCI9050_USER_IO, PCI9050_E1_RUN); /* start E1 processor */
/* the interrupts are still masked */
- sti();
msleep_interruptible(20); /* Timeout 20ms */
if (((tDpramBootSpooler *) card->dpram)->Len != DPRAM_SPOOLER_DATA_SIZE) {
@@ -276,7 +274,6 @@
dst = sp->Data; /* point to data in spool structure */
buflen = sp->Len; /* maximum len of spooled data */
wr_mirror = sp->WrPtr; /* only once read */
- sti();
/* try until all bytes written or error */
i = 0x1000; /* timeout value */
@@ -380,7 +377,6 @@
#endif /* CONFIG_HYSDN_CAPI */
return (0); /* success */
} /* data has arrived */
- sti();
msleep_interruptible(50); /* Timeout 50ms */
} /* wait until timeout */
diff --git a/drivers/isdn/hysdn/hycapi.c b/drivers/isdn/hysdn/hycapi.c
index d3999a8..53f6ad1 100644
--- a/drivers/isdn/hysdn/hycapi.c
+++ b/drivers/isdn/hysdn/hycapi.c
@@ -462,11 +462,11 @@
default: s = "???"; break;
}
len += sprintf(page+len, "%-16s %s\n", "type", s);
- if ((s = cinfo->version[VER_DRIVER]) != 0)
+ if ((s = cinfo->version[VER_DRIVER]) != NULL)
len += sprintf(page+len, "%-16s %s\n", "ver_driver", s);
- if ((s = cinfo->version[VER_CARDTYPE]) != 0)
+ if ((s = cinfo->version[VER_CARDTYPE]) != NULL)
len += sprintf(page+len, "%-16s %s\n", "ver_cardtype", s);
- if ((s = cinfo->version[VER_SERIAL]) != 0)
+ if ((s = cinfo->version[VER_SERIAL]) != NULL)
len += sprintf(page+len, "%-16s %s\n", "ver_serial", s);
len += sprintf(page+len, "%-16s %s\n", "cardname", cinfo->cardname);
diff --git a/drivers/isdn/hysdn/hysdn_procconf.c b/drivers/isdn/hysdn/hysdn_procconf.c
index 15906d0..484299b 100644
--- a/drivers/isdn/hysdn/hysdn_procconf.c
+++ b/drivers/isdn/hysdn/hysdn_procconf.c
@@ -207,30 +207,17 @@
/* read conf file -> output card info data */
/*******************************************/
static ssize_t
-hysdn_conf_read(struct file *file, char __user *buf, size_t count, loff_t * off)
+hysdn_conf_read(struct file *file, char __user *buf, size_t count, loff_t *off)
{
char *cp;
- int i;
- if (file->f_mode & FMODE_READ) {
- if (!(cp = file->private_data))
- return (-EFAULT); /* should never happen */
- i = strlen(cp); /* get total string length */
- if (*off < i) {
- /* still bytes to transfer */
- cp += *off; /* point to desired data offset */
- i -= *off; /* remaining length */
- if (i > count)
- i = count; /* limit length to transfer */
- if (copy_to_user(buf, cp, i))
- return (-EFAULT); /* copy error */
- *off += i; /* adjust offset */
- } else
- return (0);
- } else
- return (-EPERM); /* no permission to read */
+ if (!(file->f_mode & FMODE_READ))
+ return -EPERM; /* no permission to read */
- return (i);
+ if (!(cp = file->private_data))
+ return -EFAULT; /* should never happen */
+
+ return simple_read_from_buffer(buf, count, off, cp, strlen(cp));
} /* hysdn_conf_read */
/******************/
diff --git a/drivers/isdn/sc/ioctl.c b/drivers/isdn/sc/ioctl.c
index 7817d22..1081091 100644
--- a/drivers/isdn/sc/ioctl.c
+++ b/drivers/isdn/sc/ioctl.c
@@ -226,6 +226,7 @@
*/
if (copy_from_user(spid, data->dataptr, SCIOC_SPIDSIZE)) {
kfree(rcvmsg);
+ kfree(spid);
return -EFAULT;
}
diff --git a/drivers/leds/led-class.c b/drivers/leds/led-class.c
index b3c54be..559a408 100644
--- a/drivers/leds/led-class.c
+++ b/drivers/leds/led-class.c
@@ -103,13 +103,11 @@
{
int rc;
- led_cdev->dev = device_create(leds_class, parent, 0, "%s",
- led_cdev->name);
+ led_cdev->dev = device_create_drvdata(leds_class, parent, 0, led_cdev,
+ "%s", led_cdev->name);
if (IS_ERR(led_cdev->dev))
return PTR_ERR(led_cdev->dev);
- dev_set_drvdata(led_cdev->dev, led_cdev);
-
/* register the attributes */
rc = device_create_file(led_cdev->dev, &dev_attr_brightness);
if (rc)
diff --git a/drivers/lguest/lguest_device.c b/drivers/lguest/lguest_device.c
index 8080249..1a8de57 100644
--- a/drivers/lguest/lguest_device.c
+++ b/drivers/lguest/lguest_device.c
@@ -20,14 +20,11 @@
/* The pointer to our (page) of device descriptions. */
static void *lguest_devices;
-/* Unique numbering for lguest devices. */
-static unsigned int dev_index;
-
/* For Guests, device memory can be used as normal memory, so we cast away the
* __iomem to quieten sparse. */
static inline void *lguest_map(unsigned long phys_addr, unsigned long pages)
{
- return (__force void *)ioremap(phys_addr, PAGE_SIZE*pages);
+ return (__force void *)ioremap_cache(phys_addr, PAGE_SIZE*pages);
}
static inline void lguest_unmap(void *addr)
@@ -325,8 +322,10 @@
* As Andrew Tridgell says, "Untested code is buggy code".
*
* It's worth reading this carefully: we start with a pointer to the new device
- * descriptor in the "lguest_devices" page. */
-static void add_lguest_device(struct lguest_device_desc *d)
+ * descriptor in the "lguest_devices" page, and the offset into the device
+ * descriptor page so we can uniquely identify it if things go badly wrong. */
+static void add_lguest_device(struct lguest_device_desc *d,
+ unsigned int offset)
{
struct lguest_device *ldev;
@@ -334,18 +333,14 @@
* it. */
ldev = kzalloc(sizeof(*ldev), GFP_KERNEL);
if (!ldev) {
- printk(KERN_EMERG "Cannot allocate lguest dev %u\n",
- dev_index++);
+ printk(KERN_EMERG "Cannot allocate lguest dev %u type %u\n",
+ offset, d->type);
return;
}
/* This devices' parent is the lguest/ dir. */
ldev->vdev.dev.parent = &lguest_root;
/* We have a unique device index thanks to the dev_index counter. */
- ldev->vdev.index = dev_index++;
- /* The device type comes straight from the descriptor. There's also a
- * device vendor field in the virtio_device struct, which we leave as
- * 0. */
ldev->vdev.id.device = d->type;
/* We have a simple set of routines for querying the device's
* configuration information and setting its status. */
@@ -357,8 +352,8 @@
* virtio_device and calls device_register(). This makes the bus
* infrastructure look for a matching driver. */
if (register_virtio_device(&ldev->vdev) != 0) {
- printk(KERN_ERR "Failed to register lguest device %u\n",
- ldev->vdev.index);
+ printk(KERN_ERR "Failed to register lguest dev %u type %u\n",
+ offset, d->type);
kfree(ldev);
}
}
@@ -379,7 +374,7 @@
break;
printk("Device at %i has size %u\n", i, desc_size(d));
- add_lguest_device(d);
+ add_lguest_device(d, i);
}
}
diff --git a/drivers/macintosh/adb.c b/drivers/macintosh/adb.c
index b8b9e44..dbaad39 100644
--- a/drivers/macintosh/adb.c
+++ b/drivers/macintosh/adb.c
@@ -334,7 +334,7 @@
return 0;
}
-__initcall(adb_init);
+device_initcall(adb_init);
static int
do_adb_reset_bus(void)
diff --git a/drivers/macintosh/mediabay.c b/drivers/macintosh/mediabay.c
index 82add26..c34bdf8 100644
--- a/drivers/macintosh/mediabay.c
+++ b/drivers/macintosh/mediabay.c
@@ -556,7 +556,8 @@
printk("mediabay %d, registering IDE...\n", i);
pmu_suspend();
ide_port_scan(bay->cd_port);
- bay->cd_index = bay->cd_port->index;
+ if (bay->cd_port->present)
+ bay->cd_index = bay->cd_port->index;
pmu_resume();
}
if (bay->cd_index == -1) {
diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c
index c14dacd..b26927c 100644
--- a/drivers/md/bitmap.c
+++ b/drivers/md/bitmap.c
@@ -203,17 +203,6 @@
* bitmap file handling - read and write the bitmap file and its superblock
*/
-/* copy the pathname of a file to a buffer */
-char *file_path(struct file *file, char *buf, int count)
-{
- if (!buf)
- return NULL;
-
- buf = d_path(&file->f_path, buf, count);
-
- return IS_ERR(buf) ? NULL : buf;
-}
-
/*
* basic page I/O operations
*/
@@ -721,11 +710,13 @@
if (bitmap->file) {
path = kmalloc(PAGE_SIZE, GFP_KERNEL);
if (path)
- ptr = file_path(bitmap->file, path, PAGE_SIZE);
+ ptr = d_path(&bitmap->file->f_path, path,
+ PAGE_SIZE);
+
printk(KERN_ALERT
"%s: kicking failed bitmap file %s from array!\n",
- bmname(bitmap), ptr ? ptr : "");
+ bmname(bitmap), IS_ERR(ptr) ? "" : ptr);
kfree(path);
} else
diff --git a/drivers/md/linear.c b/drivers/md/linear.c
index 0b85117..1074824 100644
--- a/drivers/md/linear.c
+++ b/drivers/md/linear.c
@@ -250,6 +250,7 @@
{
linear_conf_t *conf;
+ mddev->queue->queue_lock = &mddev->queue->__queue_lock;
conf = linear_conf(mddev, mddev->raid_disks);
if (!conf)
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 83eb78b..7cf512a 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -74,6 +74,8 @@
static void md_print_devices(void);
+static DECLARE_WAIT_QUEUE_HEAD(resync_wait);
+
#define MD_BUG(x...) { printk("md: bug in file %s, line %d\n", __FILE__, __LINE__); md_print_devices(); }
/*
@@ -274,6 +276,7 @@
atomic_set(&new->active, 1);
spin_lock_init(&new->write_lock);
init_waitqueue_head(&new->sb_wait);
+ init_waitqueue_head(&new->recovery_wait);
new->reshape_position = MaxSector;
new->resync_max = MaxSector;
new->level = LEVEL_NONE;
@@ -3013,6 +3016,36 @@
static struct md_sysfs_entry md_degraded = __ATTR_RO(degraded);
static ssize_t
+sync_force_parallel_show(mddev_t *mddev, char *page)
+{
+ return sprintf(page, "%d\n", mddev->parallel_resync);
+}
+
+static ssize_t
+sync_force_parallel_store(mddev_t *mddev, const char *buf, size_t len)
+{
+ long n;
+
+ if (strict_strtol(buf, 10, &n))
+ return -EINVAL;
+
+ if (n != 0 && n != 1)
+ return -EINVAL;
+
+ mddev->parallel_resync = n;
+
+ if (mddev->sync_thread)
+ wake_up(&resync_wait);
+
+ return len;
+}
+
+/* force parallel resync, even with shared block devices */
+static struct md_sysfs_entry md_sync_force_parallel =
+__ATTR(sync_force_parallel, S_IRUGO|S_IWUSR,
+ sync_force_parallel_show, sync_force_parallel_store);
+
+static ssize_t
sync_speed_show(mddev_t *mddev, char *page)
{
unsigned long resync, dt, db;
@@ -3187,6 +3220,7 @@
&md_sync_min.attr,
&md_sync_max.attr,
&md_sync_speed.attr,
+ &md_sync_force_parallel.attr,
&md_sync_completed.attr,
&md_max_sync.attr,
&md_suspend_lo.attr,
@@ -3691,6 +3725,8 @@
module_put(mddev->pers->owner);
mddev->pers = NULL;
+ /* tell userspace to handle 'inactive' */
+ sysfs_notify(&mddev->kobj, NULL, "array_state");
set_capacity(disk, 0);
mddev->changed = 1;
@@ -3987,8 +4023,8 @@
if (!buf)
goto out;
- ptr = file_path(mddev->bitmap->file, buf, sizeof(file->pathname));
- if (!ptr)
+ ptr = d_path(&mddev->bitmap->file->f_path, buf, sizeof(file->pathname));
+ if (IS_ERR(ptr))
goto out;
strcpy(file->pathname, ptr);
@@ -5399,7 +5435,7 @@
atomic_sub(blocks, &mddev->recovery_active);
wake_up(&mddev->recovery_wait);
if (!ok) {
- set_bit(MD_RECOVERY_ERR, &mddev->recovery);
+ set_bit(MD_RECOVERY_INTR, &mddev->recovery);
md_wakeup_thread(mddev->thread);
// stop recovery, signal do_sync ....
}
@@ -5435,8 +5471,11 @@
md_wakeup_thread(mddev->thread);
}
spin_unlock_irq(&mddev->write_lock);
+ sysfs_notify(&mddev->kobj, NULL, "array_state");
}
- wait_event(mddev->sb_wait, mddev->flags==0);
+ wait_event(mddev->sb_wait,
+ !test_bit(MD_CHANGE_CLEAN, &mddev->flags) &&
+ !test_bit(MD_CHANGE_PENDING, &mddev->flags));
}
void md_write_end(mddev_t *mddev)
@@ -5471,13 +5510,17 @@
mddev->safemode = 1;
spin_unlock_irq(&mddev->write_lock);
md_update_sb(mddev, 0);
+
+ sysfs_notify(&mddev->kobj, NULL, "array_state");
+ /* wait for the dirty state to be recorded in the metadata */
+ wait_event(mddev->sb_wait,
+ !test_bit(MD_CHANGE_CLEAN, &mddev->flags) &&
+ !test_bit(MD_CHANGE_PENDING, &mddev->flags));
} else
spin_unlock_irq(&mddev->write_lock);
}
EXPORT_SYMBOL_GPL(md_allow_write);
-static DECLARE_WAIT_QUEUE_HEAD(resync_wait);
-
#define SYNC_MARKS 10
#define SYNC_MARK_STEP (3*HZ)
void md_do_sync(mddev_t *mddev)
@@ -5541,8 +5584,9 @@
for_each_mddev(mddev2, tmp) {
if (mddev2 == mddev)
continue;
- if (mddev2->curr_resync &&
- match_mddev_units(mddev,mddev2)) {
+ if (!mddev->parallel_resync
+ && mddev2->curr_resync
+ && match_mddev_units(mddev, mddev2)) {
DEFINE_WAIT(wq);
if (mddev < mddev2 && mddev->curr_resync == 2) {
/* arbitrarily yield */
@@ -5622,7 +5666,6 @@
window/2,(unsigned long long) max_sectors/2);
atomic_set(&mddev->recovery_active, 0);
- init_waitqueue_head(&mddev->recovery_wait);
last_check = 0;
if (j>2) {
@@ -5647,7 +5690,7 @@
sectors = mddev->pers->sync_request(mddev, j, &skipped,
currspeed < speed_min(mddev));
if (sectors == 0) {
- set_bit(MD_RECOVERY_ERR, &mddev->recovery);
+ set_bit(MD_RECOVERY_INTR, &mddev->recovery);
goto out;
}
@@ -5670,8 +5713,7 @@
last_check = io_sectors;
- if (test_bit(MD_RECOVERY_INTR, &mddev->recovery) ||
- test_bit(MD_RECOVERY_ERR, &mddev->recovery))
+ if (test_bit(MD_RECOVERY_INTR, &mddev->recovery))
break;
repeat:
@@ -5725,8 +5767,7 @@
/* tell personality that we are finished */
mddev->pers->sync_request(mddev, max_sectors, &skipped, 1);
- if (!test_bit(MD_RECOVERY_ERR, &mddev->recovery) &&
- !test_bit(MD_RECOVERY_CHECK, &mddev->recovery) &&
+ if (!test_bit(MD_RECOVERY_CHECK, &mddev->recovery) &&
mddev->curr_resync > 2) {
if (test_bit(MD_RECOVERY_SYNC, &mddev->recovery)) {
if (test_bit(MD_RECOVERY_INTR, &mddev->recovery)) {
@@ -5795,7 +5836,10 @@
}
if (mddev->degraded) {
- rdev_for_each(rdev, rtmp, mddev)
+ rdev_for_each(rdev, rtmp, mddev) {
+ if (rdev->raid_disk >= 0 &&
+ !test_bit(In_sync, &rdev->flags))
+ spares++;
if (rdev->raid_disk < 0
&& !test_bit(Faulty, &rdev->flags)) {
rdev->recovery_offset = 0;
@@ -5813,6 +5857,7 @@
} else
break;
}
+ }
}
return spares;
}
@@ -5826,7 +5871,7 @@
* to do that as needed.
* When it is determined that resync is needed, we set MD_RECOVERY_RUNNING in
* "->recovery" and create a thread at ->sync_thread.
- * When the thread finishes it sets MD_RECOVERY_DONE (and might set MD_RECOVERY_ERR)
+ * When the thread finishes it sets MD_RECOVERY_DONE
* and wakeups up this thread which will reap the thread and finish up.
* This thread also removes any faulty devices (with nr_pending == 0).
*
@@ -5901,8 +5946,7 @@
/* resync has finished, collect result */
md_unregister_thread(mddev->sync_thread);
mddev->sync_thread = NULL;
- if (!test_bit(MD_RECOVERY_ERR, &mddev->recovery) &&
- !test_bit(MD_RECOVERY_INTR, &mddev->recovery)) {
+ if (!test_bit(MD_RECOVERY_INTR, &mddev->recovery)) {
/* success...*/
/* activate any spares */
mddev->pers->spare_active(mddev);
@@ -5926,7 +5970,6 @@
* might be left set
*/
clear_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
- clear_bit(MD_RECOVERY_ERR, &mddev->recovery);
clear_bit(MD_RECOVERY_INTR, &mddev->recovery);
clear_bit(MD_RECOVERY_DONE, &mddev->recovery);
diff --git a/drivers/md/multipath.c b/drivers/md/multipath.c
index 42ee1a2..e968116 100644
--- a/drivers/md/multipath.c
+++ b/drivers/md/multipath.c
@@ -327,7 +327,8 @@
if (rdev) {
if (test_bit(In_sync, &rdev->flags) ||
atomic_read(&rdev->nr_pending)) {
- printk(KERN_ERR "hot-remove-disk, slot %d is identified" " but is still operational!\n", number);
+ printk(KERN_ERR "hot-remove-disk, slot %d is identified"
+ " but is still operational!\n", number);
err = -EBUSY;
goto abort;
}
@@ -417,6 +418,7 @@
* bookkeeping area. [whatever we allocate in multipath_run(),
* should be freed in multipath_stop()]
*/
+ mddev->queue->queue_lock = &mddev->queue->__queue_lock;
conf = kzalloc(sizeof(multipath_conf_t), GFP_KERNEL);
mddev->private = conf;
diff --git a/drivers/md/raid0.c b/drivers/md/raid0.c
index 818b482..914c04d 100644
--- a/drivers/md/raid0.c
+++ b/drivers/md/raid0.c
@@ -280,6 +280,7 @@
(mddev->chunk_size>>1)-1);
blk_queue_max_sectors(mddev->queue, mddev->chunk_size >> 9);
blk_queue_segment_boundary(mddev->queue, (mddev->chunk_size>>1) - 1);
+ mddev->queue->queue_lock = &mddev->queue->__queue_lock;
conf = kmalloc(sizeof (raid0_conf_t), GFP_KERNEL);
if (!conf)
diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index 6778b7c..c610b94 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -773,7 +773,7 @@
r1bio_t *r1_bio;
struct bio *read_bio;
int i, targets = 0, disks;
- struct bitmap *bitmap = mddev->bitmap;
+ struct bitmap *bitmap;
unsigned long flags;
struct bio_list bl;
struct page **behind_pages = NULL;
@@ -802,6 +802,8 @@
wait_barrier(conf);
+ bitmap = mddev->bitmap;
+
disk_stat_inc(mddev->gendisk, ios[rw]);
disk_stat_add(mddev->gendisk, sectors[rw], bio_sectors(bio));
@@ -1025,7 +1027,7 @@
/*
* if recovery is running, make sure it aborts.
*/
- set_bit(MD_RECOVERY_ERR, &mddev->recovery);
+ set_bit(MD_RECOVERY_INTR, &mddev->recovery);
} else
set_bit(Faulty, &rdev->flags);
set_bit(MD_CHANGE_DEVS, &mddev->flags);
@@ -1146,6 +1148,14 @@
err = -EBUSY;
goto abort;
}
+ /* Only remove non-faulty devices is recovery
+ * is not possible.
+ */
+ if (!test_bit(Faulty, &rdev->flags) &&
+ mddev->degraded < conf->raid_disks) {
+ err = -EBUSY;
+ goto abort;
+ }
p->rdev = NULL;
synchronize_rcu();
if (atomic_read(&rdev->nr_pending)) {
@@ -1282,6 +1292,7 @@
rdev_dec_pending(conf->mirrors[i].rdev, mddev);
} else {
/* fixup the bio for reuse */
+ int size;
sbio->bi_vcnt = vcnt;
sbio->bi_size = r1_bio->sectors << 9;
sbio->bi_idx = 0;
@@ -1295,10 +1306,20 @@
sbio->bi_sector = r1_bio->sector +
conf->mirrors[i].rdev->data_offset;
sbio->bi_bdev = conf->mirrors[i].rdev->bdev;
- for (j = 0; j < vcnt ; j++)
- memcpy(page_address(sbio->bi_io_vec[j].bv_page),
+ size = sbio->bi_size;
+ for (j = 0; j < vcnt ; j++) {
+ struct bio_vec *bi;
+ bi = &sbio->bi_io_vec[j];
+ bi->bv_offset = 0;
+ if (size > PAGE_SIZE)
+ bi->bv_len = PAGE_SIZE;
+ else
+ bi->bv_len = size;
+ size -= PAGE_SIZE;
+ memcpy(page_address(bi->bv_page),
page_address(pbio->bi_io_vec[j].bv_page),
PAGE_SIZE);
+ }
}
}
@@ -1935,6 +1956,9 @@
if (!conf->r1bio_pool)
goto out_no_mem;
+ spin_lock_init(&conf->device_lock);
+ mddev->queue->queue_lock = &conf->device_lock;
+
rdev_for_each(rdev, tmp, mddev) {
disk_idx = rdev->raid_disk;
if (disk_idx >= mddev->raid_disks
@@ -1958,7 +1982,6 @@
}
conf->raid_disks = mddev->raid_disks;
conf->mddev = mddev;
- spin_lock_init(&conf->device_lock);
INIT_LIST_HEAD(&conf->retry_list);
spin_lock_init(&conf->resync_lock);
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index faf3d89..1de17da 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -1020,7 +1020,7 @@
/*
* if recovery is running, make sure it aborts.
*/
- set_bit(MD_RECOVERY_ERR, &mddev->recovery);
+ set_bit(MD_RECOVERY_INTR, &mddev->recovery);
}
set_bit(Faulty, &rdev->flags);
set_bit(MD_CHANGE_DEVS, &mddev->flags);
@@ -1171,6 +1171,14 @@
err = -EBUSY;
goto abort;
}
+ /* Only remove faulty devices in recovery
+ * is not possible.
+ */
+ if (!test_bit(Faulty, &rdev->flags) &&
+ enough(conf)) {
+ err = -EBUSY;
+ goto abort;
+ }
p->rdev = NULL;
synchronize_rcu();
if (atomic_read(&rdev->nr_pending)) {
@@ -1237,6 +1245,7 @@
if (!uptodate)
md_error(mddev, conf->mirrors[d].rdev);
+
update_head_pos(i, r10_bio);
while (atomic_dec_and_test(&r10_bio->remaining)) {
@@ -1844,7 +1853,8 @@
if (rb2)
atomic_dec(&rb2->remaining);
r10_bio = rb2;
- if (!test_and_set_bit(MD_RECOVERY_ERR, &mddev->recovery))
+ if (!test_and_set_bit(MD_RECOVERY_INTR,
+ &mddev->recovery))
printk(KERN_INFO "raid10: %s: insufficient working devices for recovery.\n",
mdname(mddev));
break;
@@ -2082,6 +2092,9 @@
goto out_free_conf;
}
+ spin_lock_init(&conf->device_lock);
+ mddev->queue->queue_lock = &conf->device_lock;
+
rdev_for_each(rdev, tmp, mddev) {
disk_idx = rdev->raid_disk;
if (disk_idx >= mddev->raid_disks
@@ -2103,7 +2116,6 @@
disk->head_position = 0;
}
- spin_lock_init(&conf->device_lock);
INIT_LIST_HEAD(&conf->retry_list);
spin_lock_init(&conf->resync_lock);
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 087eee0..c37e256 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -94,6 +94,8 @@
#define __inline__
#endif
+#define printk_rl(args...) ((void) (printk_ratelimit() && printk(args)))
+
#if !RAID6_USE_EMPTY_ZERO_PAGE
/* In .bss so it's zeroed */
const char raid6_empty_zero_page[PAGE_SIZE] __attribute__((aligned(256)));
@@ -1143,10 +1145,12 @@
set_bit(R5_UPTODATE, &sh->dev[i].flags);
if (test_bit(R5_ReadError, &sh->dev[i].flags)) {
rdev = conf->disks[i].rdev;
- printk(KERN_INFO "raid5:%s: read error corrected (%lu sectors at %llu on %s)\n",
- mdname(conf->mddev), STRIPE_SECTORS,
- (unsigned long long)(sh->sector + rdev->data_offset),
- bdevname(rdev->bdev, b));
+ printk_rl(KERN_INFO "raid5:%s: read error corrected"
+ " (%lu sectors at %llu on %s)\n",
+ mdname(conf->mddev), STRIPE_SECTORS,
+ (unsigned long long)(sh->sector
+ + rdev->data_offset),
+ bdevname(rdev->bdev, b));
clear_bit(R5_ReadError, &sh->dev[i].flags);
clear_bit(R5_ReWrite, &sh->dev[i].flags);
}
@@ -1160,16 +1164,22 @@
clear_bit(R5_UPTODATE, &sh->dev[i].flags);
atomic_inc(&rdev->read_errors);
if (conf->mddev->degraded)
- printk(KERN_WARNING "raid5:%s: read error not correctable (sector %llu on %s).\n",
- mdname(conf->mddev),
- (unsigned long long)(sh->sector + rdev->data_offset),
- bdn);
+ printk_rl(KERN_WARNING
+ "raid5:%s: read error not correctable "
+ "(sector %llu on %s).\n",
+ mdname(conf->mddev),
+ (unsigned long long)(sh->sector
+ + rdev->data_offset),
+ bdn);
else if (test_bit(R5_ReWrite, &sh->dev[i].flags))
/* Oh, no!!! */
- printk(KERN_WARNING "raid5:%s: read error NOT corrected!! (sector %llu on %s).\n",
- mdname(conf->mddev),
- (unsigned long long)(sh->sector + rdev->data_offset),
- bdn);
+ printk_rl(KERN_WARNING
+ "raid5:%s: read error NOT corrected!! "
+ "(sector %llu on %s).\n",
+ mdname(conf->mddev),
+ (unsigned long long)(sh->sector
+ + rdev->data_offset),
+ bdn);
else if (atomic_read(&rdev->read_errors)
> conf->max_nr_stripes)
printk(KERN_WARNING
@@ -1258,7 +1268,7 @@
/*
* if recovery was running, make sure it aborts.
*/
- set_bit(MD_RECOVERY_ERR, &mddev->recovery);
+ set_bit(MD_RECOVERY_INTR, &mddev->recovery);
}
set_bit(Faulty, &rdev->flags);
printk (KERN_ALERT
@@ -1992,6 +2002,7 @@
* have quiesced.
*/
if ((s->uptodate == disks - 1) &&
+ (s->failed && disk_idx == s->failed_num) &&
!test_bit(STRIPE_OP_CHECK, &sh->ops.pending)) {
set_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.pending);
set_bit(R5_Wantcompute, &dev->flags);
@@ -2077,7 +2088,9 @@
/* we would like to get this block, possibly
* by computing it, but we might not be able to
*/
- if (s->uptodate == disks-1) {
+ if ((s->uptodate == disks - 1) &&
+ (s->failed && (i == r6s->failed_num[0] ||
+ i == r6s->failed_num[1]))) {
pr_debug("Computing stripe %llu block %d\n",
(unsigned long long)sh->sector, i);
compute_block_1(sh, i, 0);
@@ -2369,8 +2382,8 @@
/* complete a check operation */
if (test_and_clear_bit(STRIPE_OP_CHECK, &sh->ops.complete)) {
- clear_bit(STRIPE_OP_CHECK, &sh->ops.ack);
- clear_bit(STRIPE_OP_CHECK, &sh->ops.pending);
+ clear_bit(STRIPE_OP_CHECK, &sh->ops.ack);
+ clear_bit(STRIPE_OP_CHECK, &sh->ops.pending);
if (s->failed == 0) {
if (sh->ops.zero_sum_result == 0)
/* parity is correct (on disc,
@@ -2400,16 +2413,6 @@
canceled_check = 1; /* STRIPE_INSYNC is not set */
}
- /* check if we can clear a parity disk reconstruct */
- if (test_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.complete) &&
- test_bit(STRIPE_OP_MOD_REPAIR_PD, &sh->ops.pending)) {
-
- clear_bit(STRIPE_OP_MOD_REPAIR_PD, &sh->ops.pending);
- clear_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.complete);
- clear_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.ack);
- clear_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.pending);
- }
-
/* start a new check operation if there are no failures, the stripe is
* not insync, and a repair is not in flight
*/
@@ -2424,6 +2427,17 @@
}
}
+ /* check if we can clear a parity disk reconstruct */
+ if (test_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.complete) &&
+ test_bit(STRIPE_OP_MOD_REPAIR_PD, &sh->ops.pending)) {
+
+ clear_bit(STRIPE_OP_MOD_REPAIR_PD, &sh->ops.pending);
+ clear_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.complete);
+ clear_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.ack);
+ clear_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.pending);
+ }
+
+
/* Wait for check parity and compute block operations to complete
* before write-back. If a failure occurred while the check operation
* was in flight we need to cycle this stripe through handle_stripe
@@ -2634,6 +2648,7 @@
struct r5dev *dev;
unsigned long pending = 0;
mdk_rdev_t *blocked_rdev = NULL;
+ int prexor;
memset(&s, 0, sizeof(s));
pr_debug("handling stripe %llu, state=%#lx cnt=%d, pd_idx=%d "
@@ -2763,9 +2778,11 @@
/* leave prexor set until postxor is done, allows us to distinguish
* a rmw from a rcw during biodrain
*/
+ prexor = 0;
if (test_bit(STRIPE_OP_PREXOR, &sh->ops.complete) &&
test_bit(STRIPE_OP_POSTXOR, &sh->ops.complete)) {
+ prexor = 1;
clear_bit(STRIPE_OP_PREXOR, &sh->ops.complete);
clear_bit(STRIPE_OP_PREXOR, &sh->ops.ack);
clear_bit(STRIPE_OP_PREXOR, &sh->ops.pending);
@@ -2799,6 +2816,8 @@
if (!test_and_set_bit(
STRIPE_OP_IO, &sh->ops.pending))
sh->ops.count++;
+ if (prexor)
+ continue;
if (!test_bit(R5_Insync, &dev->flags) ||
(i == sh->pd_idx && s.failed == 0))
set_bit(STRIPE_INSYNC, &sh->state);
@@ -4256,6 +4275,7 @@
goto abort;
}
spin_lock_init(&conf->device_lock);
+ mddev->queue->queue_lock = &conf->device_lock;
init_waitqueue_head(&conf->wait_for_stripe);
init_waitqueue_head(&conf->wait_for_overlap);
INIT_LIST_HEAD(&conf->handle_list);
@@ -4562,6 +4582,14 @@
err = -EBUSY;
goto abort;
}
+ /* Only remove non-faulty devices if recovery
+ * isn't possible.
+ */
+ if (!test_bit(Faulty, &rdev->flags) &&
+ mddev->degraded <= conf->max_degraded) {
+ err = -EBUSY;
+ goto abort;
+ }
p->rdev = NULL;
synchronize_rcu();
if (atomic_read(&rdev->nr_pending)) {
diff --git a/drivers/media/Kconfig b/drivers/media/Kconfig
index ddf57e13..7a7803b 100644
--- a/drivers/media/Kconfig
+++ b/drivers/media/Kconfig
@@ -89,8 +89,7 @@
config VIDEO_MEDIA
tristate
- default DVB_CORE || VIDEO_DEV
- depends on DVB_CORE || VIDEO_DEV
+ default (DVB_CORE && (VIDEO_DEV = n)) || (VIDEO_DEV && (DVB_CORE = n)) || (DVB_CORE && VIDEO_DEV)
comment "Multimedia drivers"
diff --git a/drivers/media/Makefile b/drivers/media/Makefile
index cc11c4c..09a829d 100644
--- a/drivers/media/Makefile
+++ b/drivers/media/Makefile
@@ -2,12 +2,7 @@
# Makefile for the kernel multimedia device drivers.
#
-obj-y := common/
-
-obj-$(CONFIG_VIDEO_MEDIA) += common/
-
-# Since hybrid devices are here, should be compiled if DVB and/or V4L
-obj-$(CONFIG_VIDEO_MEDIA) += video/
+obj-y += common/ video/
obj-$(CONFIG_VIDEO_DEV) += radio/
obj-$(CONFIG_DVB_CORE) += dvb/
diff --git a/drivers/media/common/tuners/Kconfig b/drivers/media/common/tuners/Kconfig
index 5be85ff..8548296 100644
--- a/drivers/media/common/tuners/Kconfig
+++ b/drivers/media/common/tuners/Kconfig
@@ -1,6 +1,6 @@
config MEDIA_ATTACH
bool "Load and attach frontend and tuner driver modules as needed"
- depends on DVB_CORE
+ depends on VIDEO_MEDIA
depends on MODULES
help
Remove the static dependency of DVB card drivers on all
@@ -19,10 +19,11 @@
config MEDIA_TUNER
tristate
- default DVB_CORE || VIDEO_DEV
- depends on DVB_CORE || VIDEO_DEV
- select MEDIA_TUNER_XC2028 if !MEDIA_TUNER_CUSTOMIZE
- select MEDIA_TUNER_XC5000 if !MEDIA_TUNER_CUSTOMIZE
+ default VIDEO_MEDIA && I2C
+ depends on VIDEO_MEDIA && I2C
+ select FW_LOADER if !MEDIA_TUNER_CUSTOMIZE && HOTPLUG
+ select MEDIA_TUNER_XC2028 if !MEDIA_TUNER_CUSTOMIZE && HOTPLUG
+ select MEDIA_TUNER_XC5000 if !MEDIA_TUNER_CUSTOMIZE && HOTPLUG
select MEDIA_TUNER_MT20XX if !MEDIA_TUNER_CUSTOMIZE
select MEDIA_TUNER_TDA8290 if !MEDIA_TUNER_CUSTOMIZE
select MEDIA_TUNER_TEA5761 if !MEDIA_TUNER_CUSTOMIZE
@@ -46,7 +47,7 @@
config MEDIA_TUNER_SIMPLE
tristate "Simple tuner support"
- depends on I2C
+ depends on VIDEO_MEDIA && I2C
select MEDIA_TUNER_TDA9887
default m if MEDIA_TUNER_CUSTOMIZE
help
@@ -54,7 +55,7 @@
config MEDIA_TUNER_TDA8290
tristate "TDA 8290/8295 + 8275(a)/18271 tuner combo"
- depends on I2C
+ depends on VIDEO_MEDIA && I2C
select MEDIA_TUNER_TDA827X
select MEDIA_TUNER_TDA18271
default m if MEDIA_TUNER_CUSTOMIZE
@@ -63,21 +64,21 @@
config MEDIA_TUNER_TDA827X
tristate "Philips TDA827X silicon tuner"
- depends on DVB_CORE && I2C
+ depends on VIDEO_MEDIA && I2C
default m if DVB_FE_CUSTOMISE
help
A DVB-T silicon tuner module. Say Y when you want to support this tuner.
config MEDIA_TUNER_TDA18271
tristate "NXP TDA18271 silicon tuner"
- depends on I2C
+ depends on VIDEO_MEDIA && I2C
default m if DVB_FE_CUSTOMISE
help
A silicon tuner module. Say Y when you want to support this tuner.
config MEDIA_TUNER_TDA9887
tristate "TDA 9885/6/7 analog IF demodulator"
- depends on I2C
+ depends on VIDEO_MEDIA && I2C
default m if MEDIA_TUNER_CUSTOMIZE
help
Say Y here to include support for Philips TDA9885/6/7
@@ -85,67 +86,79 @@
config MEDIA_TUNER_TEA5761
tristate "TEA 5761 radio tuner (EXPERIMENTAL)"
- depends on I2C && EXPERIMENTAL
+ depends on VIDEO_MEDIA && I2C
+ depends on EXPERIMENTAL
default m if MEDIA_TUNER_CUSTOMIZE
help
Say Y here to include support for the Philips TEA5761 radio tuner.
config MEDIA_TUNER_TEA5767
tristate "TEA 5767 radio tuner"
- depends on I2C
+ depends on VIDEO_MEDIA && I2C
default m if MEDIA_TUNER_CUSTOMIZE
help
Say Y here to include support for the Philips TEA5767 radio tuner.
config MEDIA_TUNER_MT20XX
tristate "Microtune 2032 / 2050 tuners"
- depends on I2C
+ depends on VIDEO_MEDIA && I2C
default m if MEDIA_TUNER_CUSTOMIZE
help
Say Y here to include support for the MT2032 / MT2050 tuner.
config MEDIA_TUNER_MT2060
tristate "Microtune MT2060 silicon IF tuner"
- depends on I2C
+ depends on VIDEO_MEDIA && I2C
default m if DVB_FE_CUSTOMISE
help
A driver for the silicon IF tuner MT2060 from Microtune.
config MEDIA_TUNER_MT2266
tristate "Microtune MT2266 silicon tuner"
- depends on I2C
+ depends on VIDEO_MEDIA && I2C
default m if DVB_FE_CUSTOMISE
help
A driver for the silicon baseband tuner MT2266 from Microtune.
config MEDIA_TUNER_MT2131
tristate "Microtune MT2131 silicon tuner"
- depends on I2C
+ depends on VIDEO_MEDIA && I2C
default m if DVB_FE_CUSTOMISE
help
A driver for the silicon baseband tuner MT2131 from Microtune.
config MEDIA_TUNER_QT1010
tristate "Quantek QT1010 silicon tuner"
- depends on DVB_CORE && I2C
+ depends on VIDEO_MEDIA && I2C
default m if DVB_FE_CUSTOMISE
help
A driver for the silicon tuner QT1010 from Quantek.
config MEDIA_TUNER_XC2028
tristate "XCeive xc2028/xc3028 tuners"
- depends on I2C && FW_LOADER
+ depends on VIDEO_MEDIA && I2C
+ depends on HOTPLUG
+ select FW_LOADER
default m if MEDIA_TUNER_CUSTOMIZE
help
Say Y here to include support for the xc2028/xc3028 tuners.
config MEDIA_TUNER_XC5000
tristate "Xceive XC5000 silicon tuner"
- depends on I2C
+ depends on VIDEO_MEDIA && I2C
+ depends on HOTPLUG
+ select FW_LOADER
default m if DVB_FE_CUSTOMISE
help
A driver for the silicon tuner XC5000 from Xceive.
This device is only used inside a SiP called togther with a
demodulator for now.
+config MEDIA_TUNER_MXL5005S
+ tristate "MaxLinear MSL5005S silicon tuner"
+ depends on VIDEO_MEDIA && I2C
+ default m if DVB_FE_CUSTOMISE
+ help
+ A driver for the silicon tuner MXL5005S from MaxLinear.
+
endif # MEDIA_TUNER_CUSTOMIZE
diff --git a/drivers/media/common/tuners/Makefile b/drivers/media/common/tuners/Makefile
index 236d9932..55f7e67 100644
--- a/drivers/media/common/tuners/Makefile
+++ b/drivers/media/common/tuners/Makefile
@@ -20,6 +20,7 @@
obj-$(CONFIG_MEDIA_TUNER_MT2266) += mt2266.o
obj-$(CONFIG_MEDIA_TUNER_QT1010) += qt1010.o
obj-$(CONFIG_MEDIA_TUNER_MT2131) += mt2131.o
+obj-$(CONFIG_MEDIA_TUNER_MXL5005S) += mxl5005s.o
EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core
EXTRA_CFLAGS += -Idrivers/media/dvb/frontends
diff --git a/drivers/media/common/tuners/mxl5005s.c b/drivers/media/common/tuners/mxl5005s.c
new file mode 100644
index 0000000..0dc2bef
--- /dev/null
+++ b/drivers/media/common/tuners/mxl5005s.c
@@ -0,0 +1,4110 @@
+/*
+ MaxLinear MXL5005S VSB/QAM/DVBT tuner driver
+
+ Copyright (C) 2008 MaxLinear
+ Copyright (C) 2006 Steven Toth <stoth@hauppauge.com>
+ Functions:
+ mxl5005s_reset()
+ mxl5005s_writereg()
+ mxl5005s_writeregs()
+ mxl5005s_init()
+ mxl5005s_reconfigure()
+ mxl5005s_AssignTunerMode()
+ mxl5005s_set_params()
+ mxl5005s_get_frequency()
+ mxl5005s_get_bandwidth()
+ mxl5005s_release()
+ mxl5005s_attach()
+
+ Copyright (C) 2008 Realtek
+ Copyright (C) 2008 Jan Hoogenraad
+ Functions:
+ mxl5005s_SetRfFreqHz()
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+*/
+
+/*
+ History of this driver (Steven Toth):
+ I was given a public release of a linux driver that included
+ support for the MaxLinear MXL5005S silicon tuner. Analysis of
+ the tuner driver showed clearly three things.
+
+ 1. The tuner driver didn't support the LinuxTV tuner API
+ so the code Realtek added had to be removed.
+
+ 2. A significant amount of the driver is reference driver code
+ from MaxLinear, I felt it was important to identify and
+ preserve this.
+
+ 3. New code has to be added to interface correctly with the
+ LinuxTV API, as a regular kernel module.
+
+ Other than the reference driver enum's, I've clearly marked
+ sections of the code and retained the copyright of the
+ respective owners.
+*/
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include "dvb_frontend.h"
+#include "mxl5005s.h"
+
+static int debug;
+
+#define dprintk(level, arg...) do { \
+ if (level <= debug) \
+ printk(arg); \
+ } while (0)
+
+#define TUNER_REGS_NUM 104
+#define INITCTRL_NUM 40
+
+#ifdef _MXL_PRODUCTION
+#define CHCTRL_NUM 39
+#else
+#define CHCTRL_NUM 36
+#endif
+
+#define MXLCTRL_NUM 189
+#define MASTER_CONTROL_ADDR 9
+
+/* Enumeration of Master Control Register State */
+enum master_control_state {
+ MC_LOAD_START = 1,
+ MC_POWER_DOWN,
+ MC_SYNTH_RESET,
+ MC_SEQ_OFF
+};
+
+/* Enumeration of MXL5005 Tuner Modulation Type */
+enum {
+ MXL_DEFAULT_MODULATION = 0,
+ MXL_DVBT,
+ MXL_ATSC,
+ MXL_QAM,
+ MXL_ANALOG_CABLE,
+ MXL_ANALOG_OTA
+};
+
+/* MXL5005 Tuner Register Struct */
+struct TunerReg {
+ u16 Reg_Num; /* Tuner Register Address */
+ u16 Reg_Val; /* Current sw programmed value waiting to be writen */
+};
+
+enum {
+ /* Initialization Control Names */
+ DN_IQTN_AMP_CUT = 1, /* 1 */
+ BB_MODE, /* 2 */
+ BB_BUF, /* 3 */
+ BB_BUF_OA, /* 4 */
+ BB_ALPF_BANDSELECT, /* 5 */
+ BB_IQSWAP, /* 6 */
+ BB_DLPF_BANDSEL, /* 7 */
+ RFSYN_CHP_GAIN, /* 8 */
+ RFSYN_EN_CHP_HIGAIN, /* 9 */
+ AGC_IF, /* 10 */
+ AGC_RF, /* 11 */
+ IF_DIVVAL, /* 12 */
+ IF_VCO_BIAS, /* 13 */
+ CHCAL_INT_MOD_IF, /* 14 */
+ CHCAL_FRAC_MOD_IF, /* 15 */
+ DRV_RES_SEL, /* 16 */
+ I_DRIVER, /* 17 */
+ EN_AAF, /* 18 */
+ EN_3P, /* 19 */
+ EN_AUX_3P, /* 20 */
+ SEL_AAF_BAND, /* 21 */
+ SEQ_ENCLK16_CLK_OUT, /* 22 */
+ SEQ_SEL4_16B, /* 23 */
+ XTAL_CAPSELECT, /* 24 */
+ IF_SEL_DBL, /* 25 */
+ RFSYN_R_DIV, /* 26 */
+ SEQ_EXTSYNTHCALIF, /* 27 */
+ SEQ_EXTDCCAL, /* 28 */
+ AGC_EN_RSSI, /* 29 */
+ RFA_ENCLKRFAGC, /* 30 */
+ RFA_RSSI_REFH, /* 31 */
+ RFA_RSSI_REF, /* 32 */
+ RFA_RSSI_REFL, /* 33 */
+ RFA_FLR, /* 34 */
+ RFA_CEIL, /* 35 */
+ SEQ_EXTIQFSMPULSE, /* 36 */
+ OVERRIDE_1, /* 37 */
+ BB_INITSTATE_DLPF_TUNE, /* 38 */
+ TG_R_DIV, /* 39 */
+ EN_CHP_LIN_B, /* 40 */
+
+ /* Channel Change Control Names */
+ DN_POLY = 51, /* 51 */
+ DN_RFGAIN, /* 52 */
+ DN_CAP_RFLPF, /* 53 */
+ DN_EN_VHFUHFBAR, /* 54 */
+ DN_GAIN_ADJUST, /* 55 */
+ DN_IQTNBUF_AMP, /* 56 */
+ DN_IQTNGNBFBIAS_BST, /* 57 */
+ RFSYN_EN_OUTMUX, /* 58 */
+ RFSYN_SEL_VCO_OUT, /* 59 */
+ RFSYN_SEL_VCO_HI, /* 60 */
+ RFSYN_SEL_DIVM, /* 61 */
+ RFSYN_RF_DIV_BIAS, /* 62 */
+ DN_SEL_FREQ, /* 63 */
+ RFSYN_VCO_BIAS, /* 64 */
+ CHCAL_INT_MOD_RF, /* 65 */
+ CHCAL_FRAC_MOD_RF, /* 66 */
+ RFSYN_LPF_R, /* 67 */
+ CHCAL_EN_INT_RF, /* 68 */
+ TG_LO_DIVVAL, /* 69 */
+ TG_LO_SELVAL, /* 70 */
+ TG_DIV_VAL, /* 71 */
+ TG_VCO_BIAS, /* 72 */
+ SEQ_EXTPOWERUP, /* 73 */
+ OVERRIDE_2, /* 74 */
+ OVERRIDE_3, /* 75 */
+ OVERRIDE_4, /* 76 */
+ SEQ_FSM_PULSE, /* 77 */
+ GPIO_4B, /* 78 */
+ GPIO_3B, /* 79 */
+ GPIO_4, /* 80 */
+ GPIO_3, /* 81 */
+ GPIO_1B, /* 82 */
+ DAC_A_ENABLE, /* 83 */
+ DAC_B_ENABLE, /* 84 */
+ DAC_DIN_A, /* 85 */
+ DAC_DIN_B, /* 86 */
+#ifdef _MXL_PRODUCTION
+ RFSYN_EN_DIV, /* 87 */
+ RFSYN_DIVM, /* 88 */
+ DN_BYPASS_AGC_I2C /* 89 */
+#endif
+};
+
+/*
+ * The following context is source code provided by MaxLinear.
+ * MaxLinear source code - Common_MXL.h (?)
+ */
+
+/* Constants */
+#define MXL5005S_REG_WRITING_TABLE_LEN_MAX 104
+#define MXL5005S_LATCH_BYTE 0xfe
+
+/* Register address, MSB, and LSB */
+#define MXL5005S_BB_IQSWAP_ADDR 59
+#define MXL5005S_BB_IQSWAP_MSB 0
+#define MXL5005S_BB_IQSWAP_LSB 0
+
+#define MXL5005S_BB_DLPF_BANDSEL_ADDR 53
+#define MXL5005S_BB_DLPF_BANDSEL_MSB 4
+#define MXL5005S_BB_DLPF_BANDSEL_LSB 3
+
+/* Standard modes */
+enum {
+ MXL5005S_STANDARD_DVBT,
+ MXL5005S_STANDARD_ATSC,
+};
+#define MXL5005S_STANDARD_MODE_NUM 2
+
+/* Bandwidth modes */
+enum {
+ MXL5005S_BANDWIDTH_6MHZ = 6000000,
+ MXL5005S_BANDWIDTH_7MHZ = 7000000,
+ MXL5005S_BANDWIDTH_8MHZ = 8000000,
+};
+#define MXL5005S_BANDWIDTH_MODE_NUM 3
+
+/* MXL5005 Tuner Control Struct */
+struct TunerControl {
+ u16 Ctrl_Num; /* Control Number */
+ u16 size; /* Number of bits to represent Value */
+ u16 addr[25]; /* Array of Tuner Register Address for each bit pos */
+ u16 bit[25]; /* Array of bit pos in Reg Addr for each bit pos */
+ u16 val[25]; /* Binary representation of Value */
+};
+
+/* MXL5005 Tuner Struct */
+struct mxl5005s_state {
+ u8 Mode; /* 0: Analog Mode ; 1: Digital Mode */
+ u8 IF_Mode; /* for Analog Mode, 0: zero IF; 1: low IF */
+ u32 Chan_Bandwidth; /* filter channel bandwidth (6, 7, 8) */
+ u32 IF_OUT; /* Desired IF Out Frequency */
+ u16 IF_OUT_LOAD; /* IF Out Load Resistor (200/300 Ohms) */
+ u32 RF_IN; /* RF Input Frequency */
+ u32 Fxtal; /* XTAL Frequency */
+ u8 AGC_Mode; /* AGC Mode 0: Dual AGC; 1: Single AGC */
+ u16 TOP; /* Value: take over point */
+ u8 CLOCK_OUT; /* 0: turn off clk out; 1: turn on clock out */
+ u8 DIV_OUT; /* 4MHz or 16MHz */
+ u8 CAPSELECT; /* 0: disable On-Chip pulling cap; 1: enable */
+ u8 EN_RSSI; /* 0: disable RSSI; 1: enable RSSI */
+
+ /* Modulation Type; */
+ /* 0 - Default; 1 - DVB-T; 2 - ATSC; 3 - QAM; 4 - Analog Cable */
+ u8 Mod_Type;
+
+ /* Tracking Filter Type */
+ /* 0 - Default; 1 - Off; 2 - Type C; 3 - Type C-H */
+ u8 TF_Type;
+
+ /* Calculated Settings */
+ u32 RF_LO; /* Synth RF LO Frequency */
+ u32 IF_LO; /* Synth IF LO Frequency */
+ u32 TG_LO; /* Synth TG_LO Frequency */
+
+ /* Pointers to ControlName Arrays */
+ u16 Init_Ctrl_Num; /* Number of INIT Control Names */
+ struct TunerControl
+ Init_Ctrl[INITCTRL_NUM]; /* INIT Control Names Array Pointer */
+
+ u16 CH_Ctrl_Num; /* Number of CH Control Names */
+ struct TunerControl
+ CH_Ctrl[CHCTRL_NUM]; /* CH Control Name Array Pointer */
+
+ u16 MXL_Ctrl_Num; /* Number of MXL Control Names */
+ struct TunerControl
+ MXL_Ctrl[MXLCTRL_NUM]; /* MXL Control Name Array Pointer */
+
+ /* Pointer to Tuner Register Array */
+ u16 TunerRegs_Num; /* Number of Tuner Registers */
+ struct TunerReg
+ TunerRegs[TUNER_REGS_NUM]; /* Tuner Register Array Pointer */
+
+ /* Linux driver framework specific */
+ struct mxl5005s_config *config;
+ struct dvb_frontend *frontend;
+ struct i2c_adapter *i2c;
+
+ /* Cache values */
+ u32 current_mode;
+
+};
+
+static u16 MXL_GetMasterControl(u8 *MasterReg, int state);
+static u16 MXL_ControlWrite(struct dvb_frontend *fe, u16 ControlNum, u32 value);
+static u16 MXL_ControlRead(struct dvb_frontend *fe, u16 controlNum, u32 *value);
+static void MXL_RegWriteBit(struct dvb_frontend *fe, u8 address, u8 bit,
+ u8 bitVal);
+static u16 MXL_GetCHRegister(struct dvb_frontend *fe, u8 *RegNum,
+ u8 *RegVal, int *count);
+static u32 MXL_Ceiling(u32 value, u32 resolution);
+static u16 MXL_RegRead(struct dvb_frontend *fe, u8 RegNum, u8 *RegVal);
+static u16 MXL_ControlWrite_Group(struct dvb_frontend *fe, u16 controlNum,
+ u32 value, u16 controlGroup);
+static u16 MXL_SetGPIO(struct dvb_frontend *fe, u8 GPIO_Num, u8 GPIO_Val);
+static u16 MXL_GetInitRegister(struct dvb_frontend *fe, u8 *RegNum,
+ u8 *RegVal, int *count);
+static u32 MXL_GetXtalInt(u32 Xtal_Freq);
+static u16 MXL_TuneRF(struct dvb_frontend *fe, u32 RF_Freq);
+static void MXL_SynthIFLO_Calc(struct dvb_frontend *fe);
+static void MXL_SynthRFTGLO_Calc(struct dvb_frontend *fe);
+static u16 MXL_GetCHRegister_ZeroIF(struct dvb_frontend *fe, u8 *RegNum,
+ u8 *RegVal, int *count);
+static int mxl5005s_writeregs(struct dvb_frontend *fe, u8 *addrtable,
+ u8 *datatable, u8 len);
+static u16 MXL_IFSynthInit(struct dvb_frontend *fe);
+static int mxl5005s_AssignTunerMode(struct dvb_frontend *fe, u32 mod_type,
+ u32 bandwidth);
+static int mxl5005s_reconfigure(struct dvb_frontend *fe, u32 mod_type,
+ u32 bandwidth);
+
+/* ----------------------------------------------------------------
+ * Begin: Custom code salvaged from the Realtek driver.
+ * Copyright (C) 2008 Realtek
+ * Copyright (C) 2008 Jan Hoogenraad
+ * This code is placed under the terms of the GNU General Public License
+ *
+ * Released by Realtek under GPLv2.
+ * Thanks to Realtek for a lot of support we received !
+ *
+ * Revision: 080314 - original version
+ */
+
+static int mxl5005s_SetRfFreqHz(struct dvb_frontend *fe, unsigned long RfFreqHz)
+{
+ struct mxl5005s_state *state = fe->tuner_priv;
+ unsigned char AddrTable[MXL5005S_REG_WRITING_TABLE_LEN_MAX];
+ unsigned char ByteTable[MXL5005S_REG_WRITING_TABLE_LEN_MAX];
+ int TableLen;
+
+ u32 IfDivval = 0;
+ unsigned char MasterControlByte;
+
+ dprintk(1, "%s() freq=%ld\n", __func__, RfFreqHz);
+
+ /* Set MxL5005S tuner RF frequency according to example code. */
+
+ /* Tuner RF frequency setting stage 0 */
+ MXL_GetMasterControl(ByteTable, MC_SYNTH_RESET);
+ AddrTable[0] = MASTER_CONTROL_ADDR;
+ ByteTable[0] |= state->config->AgcMasterByte;
+
+ mxl5005s_writeregs(fe, AddrTable, ByteTable, 1);
+
+ /* Tuner RF frequency setting stage 1 */
+ MXL_TuneRF(fe, RfFreqHz);
+
+ MXL_ControlRead(fe, IF_DIVVAL, &IfDivval);
+
+ MXL_ControlWrite(fe, SEQ_FSM_PULSE, 0);
+ MXL_ControlWrite(fe, SEQ_EXTPOWERUP, 1);
+ MXL_ControlWrite(fe, IF_DIVVAL, 8);
+ MXL_GetCHRegister(fe, AddrTable, ByteTable, &TableLen);
+
+ MXL_GetMasterControl(&MasterControlByte, MC_LOAD_START);
+ AddrTable[TableLen] = MASTER_CONTROL_ADDR ;
+ ByteTable[TableLen] = MasterControlByte |
+ state->config->AgcMasterByte;
+ TableLen += 1;
+
+ mxl5005s_writeregs(fe, AddrTable, ByteTable, TableLen);
+
+ /* Wait 30 ms. */
+ msleep(150);
+
+ /* Tuner RF frequency setting stage 2 */
+ MXL_ControlWrite(fe, SEQ_FSM_PULSE, 1);
+ MXL_ControlWrite(fe, IF_DIVVAL, IfDivval);
+ MXL_GetCHRegister_ZeroIF(fe, AddrTable, ByteTable, &TableLen);
+
+ MXL_GetMasterControl(&MasterControlByte, MC_LOAD_START);
+ AddrTable[TableLen] = MASTER_CONTROL_ADDR ;
+ ByteTable[TableLen] = MasterControlByte |
+ state->config->AgcMasterByte ;
+ TableLen += 1;
+
+ mxl5005s_writeregs(fe, AddrTable, ByteTable, TableLen);
+
+ msleep(100);
+
+ return 0;
+}
+/* End: Custom code taken from the Realtek driver */
+
+/* ----------------------------------------------------------------
+ * Begin: Reference driver code found in the Realtek driver.
+ * Copyright (C) 2008 MaxLinear
+ */
+static u16 MXL5005_RegisterInit(struct dvb_frontend *fe)
+{
+ struct mxl5005s_state *state = fe->tuner_priv;
+ state->TunerRegs_Num = TUNER_REGS_NUM ;
+
+ state->TunerRegs[0].Reg_Num = 9 ;
+ state->TunerRegs[0].Reg_Val = 0x40 ;
+
+ state->TunerRegs[1].Reg_Num = 11 ;
+ state->TunerRegs[1].Reg_Val = 0x19 ;
+
+ state->TunerRegs[2].Reg_Num = 12 ;
+ state->TunerRegs[2].Reg_Val = 0x60 ;
+
+ state->TunerRegs[3].Reg_Num = 13 ;
+ state->TunerRegs[3].Reg_Val = 0x00 ;
+
+ state->TunerRegs[4].Reg_Num = 14 ;
+ state->TunerRegs[4].Reg_Val = 0x00 ;
+
+ state->TunerRegs[5].Reg_Num = 15 ;
+ state->TunerRegs[5].Reg_Val = 0xC0 ;
+
+ state->TunerRegs[6].Reg_Num = 16 ;
+ state->TunerRegs[6].Reg_Val = 0x00 ;
+
+ state->TunerRegs[7].Reg_Num = 17 ;
+ state->TunerRegs[7].Reg_Val = 0x00 ;
+
+ state->TunerRegs[8].Reg_Num = 18 ;
+ state->TunerRegs[8].Reg_Val = 0x00 ;
+
+ state->TunerRegs[9].Reg_Num = 19 ;
+ state->TunerRegs[9].Reg_Val = 0x34 ;
+
+ state->TunerRegs[10].Reg_Num = 21 ;
+ state->TunerRegs[10].Reg_Val = 0x00 ;
+
+ state->TunerRegs[11].Reg_Num = 22 ;
+ state->TunerRegs[11].Reg_Val = 0x6B ;
+
+ state->TunerRegs[12].Reg_Num = 23 ;
+ state->TunerRegs[12].Reg_Val = 0x35 ;
+
+ state->TunerRegs[13].Reg_Num = 24 ;
+ state->TunerRegs[13].Reg_Val = 0x70 ;
+
+ state->TunerRegs[14].Reg_Num = 25 ;
+ state->TunerRegs[14].Reg_Val = 0x3E ;
+
+ state->TunerRegs[15].Reg_Num = 26 ;
+ state->TunerRegs[15].Reg_Val = 0x82 ;
+
+ state->TunerRegs[16].Reg_Num = 31 ;
+ state->TunerRegs[16].Reg_Val = 0x00 ;
+
+ state->TunerRegs[17].Reg_Num = 32 ;
+ state->TunerRegs[17].Reg_Val = 0x40 ;
+
+ state->TunerRegs[18].Reg_Num = 33 ;
+ state->TunerRegs[18].Reg_Val = 0x53 ;
+
+ state->TunerRegs[19].Reg_Num = 34 ;
+ state->TunerRegs[19].Reg_Val = 0x81 ;
+
+ state->TunerRegs[20].Reg_Num = 35 ;
+ state->TunerRegs[20].Reg_Val = 0xC9 ;
+
+ state->TunerRegs[21].Reg_Num = 36 ;
+ state->TunerRegs[21].Reg_Val = 0x01 ;
+
+ state->TunerRegs[22].Reg_Num = 37 ;
+ state->TunerRegs[22].Reg_Val = 0x00 ;
+
+ state->TunerRegs[23].Reg_Num = 41 ;
+ state->TunerRegs[23].Reg_Val = 0x00 ;
+
+ state->TunerRegs[24].Reg_Num = 42 ;
+ state->TunerRegs[24].Reg_Val = 0xF8 ;
+
+ state->TunerRegs[25].Reg_Num = 43 ;
+ state->TunerRegs[25].Reg_Val = 0x43 ;
+
+ state->TunerRegs[26].Reg_Num = 44 ;
+ state->TunerRegs[26].Reg_Val = 0x20 ;
+
+ state->TunerRegs[27].Reg_Num = 45 ;
+ state->TunerRegs[27].Reg_Val = 0x80 ;
+
+ state->TunerRegs[28].Reg_Num = 46 ;
+ state->TunerRegs[28].Reg_Val = 0x88 ;
+
+ state->TunerRegs[29].Reg_Num = 47 ;
+ state->TunerRegs[29].Reg_Val = 0x86 ;
+
+ state->TunerRegs[30].Reg_Num = 48 ;
+ state->TunerRegs[30].Reg_Val = 0x00 ;
+
+ state->TunerRegs[31].Reg_Num = 49 ;
+ state->TunerRegs[31].Reg_Val = 0x00 ;
+
+ state->TunerRegs[32].Reg_Num = 53 ;
+ state->TunerRegs[32].Reg_Val = 0x94 ;
+
+ state->TunerRegs[33].Reg_Num = 54 ;
+ state->TunerRegs[33].Reg_Val = 0xFA ;
+
+ state->TunerRegs[34].Reg_Num = 55 ;
+ state->TunerRegs[34].Reg_Val = 0x92 ;
+
+ state->TunerRegs[35].Reg_Num = 56 ;
+ state->TunerRegs[35].Reg_Val = 0x80 ;
+
+ state->TunerRegs[36].Reg_Num = 57 ;
+ state->TunerRegs[36].Reg_Val = 0x41 ;
+
+ state->TunerRegs[37].Reg_Num = 58 ;
+ state->TunerRegs[37].Reg_Val = 0xDB ;
+
+ state->TunerRegs[38].Reg_Num = 59 ;
+ state->TunerRegs[38].Reg_Val = 0x00 ;
+
+ state->TunerRegs[39].Reg_Num = 60 ;
+ state->TunerRegs[39].Reg_Val = 0x00 ;
+
+ state->TunerRegs[40].Reg_Num = 61 ;
+ state->TunerRegs[40].Reg_Val = 0x00 ;
+
+ state->TunerRegs[41].Reg_Num = 62 ;
+ state->TunerRegs[41].Reg_Val = 0x00 ;
+
+ state->TunerRegs[42].Reg_Num = 65 ;
+ state->TunerRegs[42].Reg_Val = 0xF8 ;
+
+ state->TunerRegs[43].Reg_Num = 66 ;
+ state->TunerRegs[43].Reg_Val = 0xE4 ;
+
+ state->TunerRegs[44].Reg_Num = 67 ;
+ state->TunerRegs[44].Reg_Val = 0x90 ;
+
+ state->TunerRegs[45].Reg_Num = 68 ;
+ state->TunerRegs[45].Reg_Val = 0xC0 ;
+
+ state->TunerRegs[46].Reg_Num = 69 ;
+ state->TunerRegs[46].Reg_Val = 0x01 ;
+
+ state->TunerRegs[47].Reg_Num = 70 ;
+ state->TunerRegs[47].Reg_Val = 0x50 ;
+
+ state->TunerRegs[48].Reg_Num = 71 ;
+ state->TunerRegs[48].Reg_Val = 0x06 ;
+
+ state->TunerRegs[49].Reg_Num = 72 ;
+ state->TunerRegs[49].Reg_Val = 0x00 ;
+
+ state->TunerRegs[50].Reg_Num = 73 ;
+ state->TunerRegs[50].Reg_Val = 0x20 ;
+
+ state->TunerRegs[51].Reg_Num = 76 ;
+ state->TunerRegs[51].Reg_Val = 0xBB ;
+
+ state->TunerRegs[52].Reg_Num = 77 ;
+ state->TunerRegs[52].Reg_Val = 0x13 ;
+
+ state->TunerRegs[53].Reg_Num = 81 ;
+ state->TunerRegs[53].Reg_Val = 0x04 ;
+
+ state->TunerRegs[54].Reg_Num = 82 ;
+ state->TunerRegs[54].Reg_Val = 0x75 ;
+
+ state->TunerRegs[55].Reg_Num = 83 ;
+ state->TunerRegs[55].Reg_Val = 0x00 ;
+
+ state->TunerRegs[56].Reg_Num = 84 ;
+ state->TunerRegs[56].Reg_Val = 0x00 ;
+
+ state->TunerRegs[57].Reg_Num = 85 ;
+ state->TunerRegs[57].Reg_Val = 0x00 ;
+
+ state->TunerRegs[58].Reg_Num = 91 ;
+ state->TunerRegs[58].Reg_Val = 0x70 ;
+
+ state->TunerRegs[59].Reg_Num = 92 ;
+ state->TunerRegs[59].Reg_Val = 0x00 ;
+
+ state->TunerRegs[60].Reg_Num = 93 ;
+ state->TunerRegs[60].Reg_Val = 0x00 ;
+
+ state->TunerRegs[61].Reg_Num = 94 ;
+ state->TunerRegs[61].Reg_Val = 0x00 ;
+
+ state->TunerRegs[62].Reg_Num = 95 ;
+ state->TunerRegs[62].Reg_Val = 0x0C ;
+
+ state->TunerRegs[63].Reg_Num = 96 ;
+ state->TunerRegs[63].Reg_Val = 0x00 ;
+
+ state->TunerRegs[64].Reg_Num = 97 ;
+ state->TunerRegs[64].Reg_Val = 0x00 ;
+
+ state->TunerRegs[65].Reg_Num = 98 ;
+ state->TunerRegs[65].Reg_Val = 0xE2 ;
+
+ state->TunerRegs[66].Reg_Num = 99 ;
+ state->TunerRegs[66].Reg_Val = 0x00 ;
+
+ state->TunerRegs[67].Reg_Num = 100 ;
+ state->TunerRegs[67].Reg_Val = 0x00 ;
+
+ state->TunerRegs[68].Reg_Num = 101 ;
+ state->TunerRegs[68].Reg_Val = 0x12 ;
+
+ state->TunerRegs[69].Reg_Num = 102 ;
+ state->TunerRegs[69].Reg_Val = 0x80 ;
+
+ state->TunerRegs[70].Reg_Num = 103 ;
+ state->TunerRegs[70].Reg_Val = 0x32 ;
+
+ state->TunerRegs[71].Reg_Num = 104 ;
+ state->TunerRegs[71].Reg_Val = 0xB4 ;
+
+ state->TunerRegs[72].Reg_Num = 105 ;
+ state->TunerRegs[72].Reg_Val = 0x60 ;
+
+ state->TunerRegs[73].Reg_Num = 106 ;
+ state->TunerRegs[73].Reg_Val = 0x83 ;
+
+ state->TunerRegs[74].Reg_Num = 107 ;
+ state->TunerRegs[74].Reg_Val = 0x84 ;
+
+ state->TunerRegs[75].Reg_Num = 108 ;
+ state->TunerRegs[75].Reg_Val = 0x9C ;
+
+ state->TunerRegs[76].Reg_Num = 109 ;
+ state->TunerRegs[76].Reg_Val = 0x02 ;
+
+ state->TunerRegs[77].Reg_Num = 110 ;
+ state->TunerRegs[77].Reg_Val = 0x81 ;
+
+ state->TunerRegs[78].Reg_Num = 111 ;
+ state->TunerRegs[78].Reg_Val = 0xC0 ;
+
+ state->TunerRegs[79].Reg_Num = 112 ;
+ state->TunerRegs[79].Reg_Val = 0x10 ;
+
+ state->TunerRegs[80].Reg_Num = 131 ;
+ state->TunerRegs[80].Reg_Val = 0x8A ;
+
+ state->TunerRegs[81].Reg_Num = 132 ;
+ state->TunerRegs[81].Reg_Val = 0x10 ;
+
+ state->TunerRegs[82].Reg_Num = 133 ;
+ state->TunerRegs[82].Reg_Val = 0x24 ;
+
+ state->TunerRegs[83].Reg_Num = 134 ;
+ state->TunerRegs[83].Reg_Val = 0x00 ;
+
+ state->TunerRegs[84].Reg_Num = 135 ;
+ state->TunerRegs[84].Reg_Val = 0x00 ;
+
+ state->TunerRegs[85].Reg_Num = 136 ;
+ state->TunerRegs[85].Reg_Val = 0x7E ;
+
+ state->TunerRegs[86].Reg_Num = 137 ;
+ state->TunerRegs[86].Reg_Val = 0x40 ;
+
+ state->TunerRegs[87].Reg_Num = 138 ;
+ state->TunerRegs[87].Reg_Val = 0x38 ;
+
+ state->TunerRegs[88].Reg_Num = 146 ;
+ state->TunerRegs[88].Reg_Val = 0xF6 ;
+
+ state->TunerRegs[89].Reg_Num = 147 ;
+ state->TunerRegs[89].Reg_Val = 0x1A ;
+
+ state->TunerRegs[90].Reg_Num = 148 ;
+ state->TunerRegs[90].Reg_Val = 0x62 ;
+
+ state->TunerRegs[91].Reg_Num = 149 ;
+ state->TunerRegs[91].Reg_Val = 0x33 ;
+
+ state->TunerRegs[92].Reg_Num = 150 ;
+ state->TunerRegs[92].Reg_Val = 0x80 ;
+
+ state->TunerRegs[93].Reg_Num = 156 ;
+ state->TunerRegs[93].Reg_Val = 0x56 ;
+
+ state->TunerRegs[94].Reg_Num = 157 ;
+ state->TunerRegs[94].Reg_Val = 0x17 ;
+
+ state->TunerRegs[95].Reg_Num = 158 ;
+ state->TunerRegs[95].Reg_Val = 0xA9 ;
+
+ state->TunerRegs[96].Reg_Num = 159 ;
+ state->TunerRegs[96].Reg_Val = 0x00 ;
+
+ state->TunerRegs[97].Reg_Num = 160 ;
+ state->TunerRegs[97].Reg_Val = 0x00 ;
+
+ state->TunerRegs[98].Reg_Num = 161 ;
+ state->TunerRegs[98].Reg_Val = 0x00 ;
+
+ state->TunerRegs[99].Reg_Num = 162 ;
+ state->TunerRegs[99].Reg_Val = 0x40 ;
+
+ state->TunerRegs[100].Reg_Num = 166 ;
+ state->TunerRegs[100].Reg_Val = 0xAE ;
+
+ state->TunerRegs[101].Reg_Num = 167 ;
+ state->TunerRegs[101].Reg_Val = 0x1B ;
+
+ state->TunerRegs[102].Reg_Num = 168 ;
+ state->TunerRegs[102].Reg_Val = 0xF2 ;
+
+ state->TunerRegs[103].Reg_Num = 195 ;
+ state->TunerRegs[103].Reg_Val = 0x00 ;
+
+ return 0 ;
+}
+
+static u16 MXL5005_ControlInit(struct dvb_frontend *fe)
+{
+ struct mxl5005s_state *state = fe->tuner_priv;
+ state->Init_Ctrl_Num = INITCTRL_NUM;
+
+ state->Init_Ctrl[0].Ctrl_Num = DN_IQTN_AMP_CUT ;
+ state->Init_Ctrl[0].size = 1 ;
+ state->Init_Ctrl[0].addr[0] = 73;
+ state->Init_Ctrl[0].bit[0] = 7;
+ state->Init_Ctrl[0].val[0] = 0;
+
+ state->Init_Ctrl[1].Ctrl_Num = BB_MODE ;
+ state->Init_Ctrl[1].size = 1 ;
+ state->Init_Ctrl[1].addr[0] = 53;
+ state->Init_Ctrl[1].bit[0] = 2;
+ state->Init_Ctrl[1].val[0] = 1;
+
+ state->Init_Ctrl[2].Ctrl_Num = BB_BUF ;
+ state->Init_Ctrl[2].size = 2 ;
+ state->Init_Ctrl[2].addr[0] = 53;
+ state->Init_Ctrl[2].bit[0] = 1;
+ state->Init_Ctrl[2].val[0] = 0;
+ state->Init_Ctrl[2].addr[1] = 57;
+ state->Init_Ctrl[2].bit[1] = 0;
+ state->Init_Ctrl[2].val[1] = 1;
+
+ state->Init_Ctrl[3].Ctrl_Num = BB_BUF_OA ;
+ state->Init_Ctrl[3].size = 1 ;
+ state->Init_Ctrl[3].addr[0] = 53;
+ state->Init_Ctrl[3].bit[0] = 0;
+ state->Init_Ctrl[3].val[0] = 0;
+
+ state->Init_Ctrl[4].Ctrl_Num = BB_ALPF_BANDSELECT ;
+ state->Init_Ctrl[4].size = 3 ;
+ state->Init_Ctrl[4].addr[0] = 53;
+ state->Init_Ctrl[4].bit[0] = 5;
+ state->Init_Ctrl[4].val[0] = 0;
+ state->Init_Ctrl[4].addr[1] = 53;
+ state->Init_Ctrl[4].bit[1] = 6;
+ state->Init_Ctrl[4].val[1] = 0;
+ state->Init_Ctrl[4].addr[2] = 53;
+ state->Init_Ctrl[4].bit[2] = 7;
+ state->Init_Ctrl[4].val[2] = 1;
+
+ state->Init_Ctrl[5].Ctrl_Num = BB_IQSWAP ;
+ state->Init_Ctrl[5].size = 1 ;
+ state->Init_Ctrl[5].addr[0] = 59;
+ state->Init_Ctrl[5].bit[0] = 0;
+ state->Init_Ctrl[5].val[0] = 0;
+
+ state->Init_Ctrl[6].Ctrl_Num = BB_DLPF_BANDSEL ;
+ state->Init_Ctrl[6].size = 2 ;
+ state->Init_Ctrl[6].addr[0] = 53;
+ state->Init_Ctrl[6].bit[0] = 3;
+ state->Init_Ctrl[6].val[0] = 0;
+ state->Init_Ctrl[6].addr[1] = 53;
+ state->Init_Ctrl[6].bit[1] = 4;
+ state->Init_Ctrl[6].val[1] = 1;
+
+ state->Init_Ctrl[7].Ctrl_Num = RFSYN_CHP_GAIN ;
+ state->Init_Ctrl[7].size = 4 ;
+ state->Init_Ctrl[7].addr[0] = 22;
+ state->Init_Ctrl[7].bit[0] = 4;
+ state->Init_Ctrl[7].val[0] = 0;
+ state->Init_Ctrl[7].addr[1] = 22;
+ state->Init_Ctrl[7].bit[1] = 5;
+ state->Init_Ctrl[7].val[1] = 1;
+ state->Init_Ctrl[7].addr[2] = 22;
+ state->Init_Ctrl[7].bit[2] = 6;
+ state->Init_Ctrl[7].val[2] = 1;
+ state->Init_Ctrl[7].addr[3] = 22;
+ state->Init_Ctrl[7].bit[3] = 7;
+ state->Init_Ctrl[7].val[3] = 0;
+
+ state->Init_Ctrl[8].Ctrl_Num = RFSYN_EN_CHP_HIGAIN ;
+ state->Init_Ctrl[8].size = 1 ;
+ state->Init_Ctrl[8].addr[0] = 22;
+ state->Init_Ctrl[8].bit[0] = 2;
+ state->Init_Ctrl[8].val[0] = 0;
+
+ state->Init_Ctrl[9].Ctrl_Num = AGC_IF ;
+ state->Init_Ctrl[9].size = 4 ;
+ state->Init_Ctrl[9].addr[0] = 76;
+ state->Init_Ctrl[9].bit[0] = 0;
+ state->Init_Ctrl[9].val[0] = 1;
+ state->Init_Ctrl[9].addr[1] = 76;
+ state->Init_Ctrl[9].bit[1] = 1;
+ state->Init_Ctrl[9].val[1] = 1;
+ state->Init_Ctrl[9].addr[2] = 76;
+ state->Init_Ctrl[9].bit[2] = 2;
+ state->Init_Ctrl[9].val[2] = 0;
+ state->Init_Ctrl[9].addr[3] = 76;
+ state->Init_Ctrl[9].bit[3] = 3;
+ state->Init_Ctrl[9].val[3] = 1;
+
+ state->Init_Ctrl[10].Ctrl_Num = AGC_RF ;
+ state->Init_Ctrl[10].size = 4 ;
+ state->Init_Ctrl[10].addr[0] = 76;
+ state->Init_Ctrl[10].bit[0] = 4;
+ state->Init_Ctrl[10].val[0] = 1;
+ state->Init_Ctrl[10].addr[1] = 76;
+ state->Init_Ctrl[10].bit[1] = 5;
+ state->Init_Ctrl[10].val[1] = 1;
+ state->Init_Ctrl[10].addr[2] = 76;
+ state->Init_Ctrl[10].bit[2] = 6;
+ state->Init_Ctrl[10].val[2] = 0;
+ state->Init_Ctrl[10].addr[3] = 76;
+ state->Init_Ctrl[10].bit[3] = 7;
+ state->Init_Ctrl[10].val[3] = 1;
+
+ state->Init_Ctrl[11].Ctrl_Num = IF_DIVVAL ;
+ state->Init_Ctrl[11].size = 5 ;
+ state->Init_Ctrl[11].addr[0] = 43;
+ state->Init_Ctrl[11].bit[0] = 3;
+ state->Init_Ctrl[11].val[0] = 0;
+ state->Init_Ctrl[11].addr[1] = 43;
+ state->Init_Ctrl[11].bit[1] = 4;
+ state->Init_Ctrl[11].val[1] = 0;
+ state->Init_Ctrl[11].addr[2] = 43;
+ state->Init_Ctrl[11].bit[2] = 5;
+ state->Init_Ctrl[11].val[2] = 0;
+ state->Init_Ctrl[11].addr[3] = 43;
+ state->Init_Ctrl[11].bit[3] = 6;
+ state->Init_Ctrl[11].val[3] = 1;
+ state->Init_Ctrl[11].addr[4] = 43;
+ state->Init_Ctrl[11].bit[4] = 7;
+ state->Init_Ctrl[11].val[4] = 0;
+
+ state->Init_Ctrl[12].Ctrl_Num = IF_VCO_BIAS ;
+ state->Init_Ctrl[12].size = 6 ;
+ state->Init_Ctrl[12].addr[0] = 44;
+ state->Init_Ctrl[12].bit[0] = 2;
+ state->Init_Ctrl[12].val[0] = 0;
+ state->Init_Ctrl[12].addr[1] = 44;
+ state->Init_Ctrl[12].bit[1] = 3;
+ state->Init_Ctrl[12].val[1] = 0;
+ state->Init_Ctrl[12].addr[2] = 44;
+ state->Init_Ctrl[12].bit[2] = 4;
+ state->Init_Ctrl[12].val[2] = 0;
+ state->Init_Ctrl[12].addr[3] = 44;
+ state->Init_Ctrl[12].bit[3] = 5;
+ state->Init_Ctrl[12].val[3] = 1;
+ state->Init_Ctrl[12].addr[4] = 44;
+ state->Init_Ctrl[12].bit[4] = 6;
+ state->Init_Ctrl[12].val[4] = 0;
+ state->Init_Ctrl[12].addr[5] = 44;
+ state->Init_Ctrl[12].bit[5] = 7;
+ state->Init_Ctrl[12].val[5] = 0;
+
+ state->Init_Ctrl[13].Ctrl_Num = CHCAL_INT_MOD_IF ;
+ state->Init_Ctrl[13].size = 7 ;
+ state->Init_Ctrl[13].addr[0] = 11;
+ state->Init_Ctrl[13].bit[0] = 0;
+ state->Init_Ctrl[13].val[0] = 1;
+ state->Init_Ctrl[13].addr[1] = 11;
+ state->Init_Ctrl[13].bit[1] = 1;
+ state->Init_Ctrl[13].val[1] = 0;
+ state->Init_Ctrl[13].addr[2] = 11;
+ state->Init_Ctrl[13].bit[2] = 2;
+ state->Init_Ctrl[13].val[2] = 0;
+ state->Init_Ctrl[13].addr[3] = 11;
+ state->Init_Ctrl[13].bit[3] = 3;
+ state->Init_Ctrl[13].val[3] = 1;
+ state->Init_Ctrl[13].addr[4] = 11;
+ state->Init_Ctrl[13].bit[4] = 4;
+ state->Init_Ctrl[13].val[4] = 1;
+ state->Init_Ctrl[13].addr[5] = 11;
+ state->Init_Ctrl[13].bit[5] = 5;
+ state->Init_Ctrl[13].val[5] = 0;
+ state->Init_Ctrl[13].addr[6] = 11;
+ state->Init_Ctrl[13].bit[6] = 6;
+ state->Init_Ctrl[13].val[6] = 0;
+
+ state->Init_Ctrl[14].Ctrl_Num = CHCAL_FRAC_MOD_IF ;
+ state->Init_Ctrl[14].size = 16 ;
+ state->Init_Ctrl[14].addr[0] = 13;
+ state->Init_Ctrl[14].bit[0] = 0;
+ state->Init_Ctrl[14].val[0] = 0;
+ state->Init_Ctrl[14].addr[1] = 13;
+ state->Init_Ctrl[14].bit[1] = 1;
+ state->Init_Ctrl[14].val[1] = 0;
+ state->Init_Ctrl[14].addr[2] = 13;
+ state->Init_Ctrl[14].bit[2] = 2;
+ state->Init_Ctrl[14].val[2] = 0;
+ state->Init_Ctrl[14].addr[3] = 13;
+ state->Init_Ctrl[14].bit[3] = 3;
+ state->Init_Ctrl[14].val[3] = 0;
+ state->Init_Ctrl[14].addr[4] = 13;
+ state->Init_Ctrl[14].bit[4] = 4;
+ state->Init_Ctrl[14].val[4] = 0;
+ state->Init_Ctrl[14].addr[5] = 13;
+ state->Init_Ctrl[14].bit[5] = 5;
+ state->Init_Ctrl[14].val[5] = 0;
+ state->Init_Ctrl[14].addr[6] = 13;
+ state->Init_Ctrl[14].bit[6] = 6;
+ state->Init_Ctrl[14].val[6] = 0;
+ state->Init_Ctrl[14].addr[7] = 13;
+ state->Init_Ctrl[14].bit[7] = 7;
+ state->Init_Ctrl[14].val[7] = 0;
+ state->Init_Ctrl[14].addr[8] = 12;
+ state->Init_Ctrl[14].bit[8] = 0;
+ state->Init_Ctrl[14].val[8] = 0;
+ state->Init_Ctrl[14].addr[9] = 12;
+ state->Init_Ctrl[14].bit[9] = 1;
+ state->Init_Ctrl[14].val[9] = 0;
+ state->Init_Ctrl[14].addr[10] = 12;
+ state->Init_Ctrl[14].bit[10] = 2;
+ state->Init_Ctrl[14].val[10] = 0;
+ state->Init_Ctrl[14].addr[11] = 12;
+ state->Init_Ctrl[14].bit[11] = 3;
+ state->Init_Ctrl[14].val[11] = 0;
+ state->Init_Ctrl[14].addr[12] = 12;
+ state->Init_Ctrl[14].bit[12] = 4;
+ state->Init_Ctrl[14].val[12] = 0;
+ state->Init_Ctrl[14].addr[13] = 12;
+ state->Init_Ctrl[14].bit[13] = 5;
+ state->Init_Ctrl[14].val[13] = 1;
+ state->Init_Ctrl[14].addr[14] = 12;
+ state->Init_Ctrl[14].bit[14] = 6;
+ state->Init_Ctrl[14].val[14] = 1;
+ state->Init_Ctrl[14].addr[15] = 12;
+ state->Init_Ctrl[14].bit[15] = 7;
+ state->Init_Ctrl[14].val[15] = 0;
+
+ state->Init_Ctrl[15].Ctrl_Num = DRV_RES_SEL ;
+ state->Init_Ctrl[15].size = 3 ;
+ state->Init_Ctrl[15].addr[0] = 147;
+ state->Init_Ctrl[15].bit[0] = 2;
+ state->Init_Ctrl[15].val[0] = 0;
+ state->Init_Ctrl[15].addr[1] = 147;
+ state->Init_Ctrl[15].bit[1] = 3;
+ state->Init_Ctrl[15].val[1] = 1;
+ state->Init_Ctrl[15].addr[2] = 147;
+ state->Init_Ctrl[15].bit[2] = 4;
+ state->Init_Ctrl[15].val[2] = 1;
+
+ state->Init_Ctrl[16].Ctrl_Num = I_DRIVER ;
+ state->Init_Ctrl[16].size = 2 ;
+ state->Init_Ctrl[16].addr[0] = 147;
+ state->Init_Ctrl[16].bit[0] = 0;
+ state->Init_Ctrl[16].val[0] = 0;
+ state->Init_Ctrl[16].addr[1] = 147;
+ state->Init_Ctrl[16].bit[1] = 1;
+ state->Init_Ctrl[16].val[1] = 1;
+
+ state->Init_Ctrl[17].Ctrl_Num = EN_AAF ;
+ state->Init_Ctrl[17].size = 1 ;
+ state->Init_Ctrl[17].addr[0] = 147;
+ state->Init_Ctrl[17].bit[0] = 7;
+ state->Init_Ctrl[17].val[0] = 0;
+
+ state->Init_Ctrl[18].Ctrl_Num = EN_3P ;
+ state->Init_Ctrl[18].size = 1 ;
+ state->Init_Ctrl[18].addr[0] = 147;
+ state->Init_Ctrl[18].bit[0] = 6;
+ state->Init_Ctrl[18].val[0] = 0;
+
+ state->Init_Ctrl[19].Ctrl_Num = EN_AUX_3P ;
+ state->Init_Ctrl[19].size = 1 ;
+ state->Init_Ctrl[19].addr[0] = 156;
+ state->Init_Ctrl[19].bit[0] = 0;
+ state->Init_Ctrl[19].val[0] = 0;
+
+ state->Init_Ctrl[20].Ctrl_Num = SEL_AAF_BAND ;
+ state->Init_Ctrl[20].size = 1 ;
+ state->Init_Ctrl[20].addr[0] = 147;
+ state->Init_Ctrl[20].bit[0] = 5;
+ state->Init_Ctrl[20].val[0] = 0;
+
+ state->Init_Ctrl[21].Ctrl_Num = SEQ_ENCLK16_CLK_OUT ;
+ state->Init_Ctrl[21].size = 1 ;
+ state->Init_Ctrl[21].addr[0] = 137;
+ state->Init_Ctrl[21].bit[0] = 4;
+ state->Init_Ctrl[21].val[0] = 0;
+
+ state->Init_Ctrl[22].Ctrl_Num = SEQ_SEL4_16B ;
+ state->Init_Ctrl[22].size = 1 ;
+ state->Init_Ctrl[22].addr[0] = 137;
+ state->Init_Ctrl[22].bit[0] = 7;
+ state->Init_Ctrl[22].val[0] = 0;
+
+ state->Init_Ctrl[23].Ctrl_Num = XTAL_CAPSELECT ;
+ state->Init_Ctrl[23].size = 1 ;
+ state->Init_Ctrl[23].addr[0] = 91;
+ state->Init_Ctrl[23].bit[0] = 5;
+ state->Init_Ctrl[23].val[0] = 1;
+
+ state->Init_Ctrl[24].Ctrl_Num = IF_SEL_DBL ;
+ state->Init_Ctrl[24].size = 1 ;
+ state->Init_Ctrl[24].addr[0] = 43;
+ state->Init_Ctrl[24].bit[0] = 0;
+ state->Init_Ctrl[24].val[0] = 1;
+
+ state->Init_Ctrl[25].Ctrl_Num = RFSYN_R_DIV ;
+ state->Init_Ctrl[25].size = 2 ;
+ state->Init_Ctrl[25].addr[0] = 22;
+ state->Init_Ctrl[25].bit[0] = 0;
+ state->Init_Ctrl[25].val[0] = 1;
+ state->Init_Ctrl[25].addr[1] = 22;
+ state->Init_Ctrl[25].bit[1] = 1;
+ state->Init_Ctrl[25].val[1] = 1;
+
+ state->Init_Ctrl[26].Ctrl_Num = SEQ_EXTSYNTHCALIF ;
+ state->Init_Ctrl[26].size = 1 ;
+ state->Init_Ctrl[26].addr[0] = 134;
+ state->Init_Ctrl[26].bit[0] = 2;
+ state->Init_Ctrl[26].val[0] = 0;
+
+ state->Init_Ctrl[27].Ctrl_Num = SEQ_EXTDCCAL ;
+ state->Init_Ctrl[27].size = 1 ;
+ state->Init_Ctrl[27].addr[0] = 137;
+ state->Init_Ctrl[27].bit[0] = 3;
+ state->Init_Ctrl[27].val[0] = 0;
+
+ state->Init_Ctrl[28].Ctrl_Num = AGC_EN_RSSI ;
+ state->Init_Ctrl[28].size = 1 ;
+ state->Init_Ctrl[28].addr[0] = 77;
+ state->Init_Ctrl[28].bit[0] = 7;
+ state->Init_Ctrl[28].val[0] = 0;
+
+ state->Init_Ctrl[29].Ctrl_Num = RFA_ENCLKRFAGC ;
+ state->Init_Ctrl[29].size = 1 ;
+ state->Init_Ctrl[29].addr[0] = 166;
+ state->Init_Ctrl[29].bit[0] = 7;
+ state->Init_Ctrl[29].val[0] = 1;
+
+ state->Init_Ctrl[30].Ctrl_Num = RFA_RSSI_REFH ;
+ state->Init_Ctrl[30].size = 3 ;
+ state->Init_Ctrl[30].addr[0] = 166;
+ state->Init_Ctrl[30].bit[0] = 0;
+ state->Init_Ctrl[30].val[0] = 0;
+ state->Init_Ctrl[30].addr[1] = 166;
+ state->Init_Ctrl[30].bit[1] = 1;
+ state->Init_Ctrl[30].val[1] = 1;
+ state->Init_Ctrl[30].addr[2] = 166;
+ state->Init_Ctrl[30].bit[2] = 2;
+ state->Init_Ctrl[30].val[2] = 1;
+
+ state->Init_Ctrl[31].Ctrl_Num = RFA_RSSI_REF ;
+ state->Init_Ctrl[31].size = 3 ;
+ state->Init_Ctrl[31].addr[0] = 166;
+ state->Init_Ctrl[31].bit[0] = 3;
+ state->Init_Ctrl[31].val[0] = 1;
+ state->Init_Ctrl[31].addr[1] = 166;
+ state->Init_Ctrl[31].bit[1] = 4;
+ state->Init_Ctrl[31].val[1] = 0;
+ state->Init_Ctrl[31].addr[2] = 166;
+ state->Init_Ctrl[31].bit[2] = 5;
+ state->Init_Ctrl[31].val[2] = 1;
+
+ state->Init_Ctrl[32].Ctrl_Num = RFA_RSSI_REFL ;
+ state->Init_Ctrl[32].size = 3 ;
+ state->Init_Ctrl[32].addr[0] = 167;
+ state->Init_Ctrl[32].bit[0] = 0;
+ state->Init_Ctrl[32].val[0] = 1;
+ state->Init_Ctrl[32].addr[1] = 167;
+ state->Init_Ctrl[32].bit[1] = 1;
+ state->Init_Ctrl[32].val[1] = 1;
+ state->Init_Ctrl[32].addr[2] = 167;
+ state->Init_Ctrl[32].bit[2] = 2;
+ state->Init_Ctrl[32].val[2] = 0;
+
+ state->Init_Ctrl[33].Ctrl_Num = RFA_FLR ;
+ state->Init_Ctrl[33].size = 4 ;
+ state->Init_Ctrl[33].addr[0] = 168;
+ state->Init_Ctrl[33].bit[0] = 0;
+ state->Init_Ctrl[33].val[0] = 0;
+ state->Init_Ctrl[33].addr[1] = 168;
+ state->Init_Ctrl[33].bit[1] = 1;
+ state->Init_Ctrl[33].val[1] = 1;
+ state->Init_Ctrl[33].addr[2] = 168;
+ state->Init_Ctrl[33].bit[2] = 2;
+ state->Init_Ctrl[33].val[2] = 0;
+ state->Init_Ctrl[33].addr[3] = 168;
+ state->Init_Ctrl[33].bit[3] = 3;
+ state->Init_Ctrl[33].val[3] = 0;
+
+ state->Init_Ctrl[34].Ctrl_Num = RFA_CEIL ;
+ state->Init_Ctrl[34].size = 4 ;
+ state->Init_Ctrl[34].addr[0] = 168;
+ state->Init_Ctrl[34].bit[0] = 4;
+ state->Init_Ctrl[34].val[0] = 1;
+ state->Init_Ctrl[34].addr[1] = 168;
+ state->Init_Ctrl[34].bit[1] = 5;
+ state->Init_Ctrl[34].val[1] = 1;
+ state->Init_Ctrl[34].addr[2] = 168;
+ state->Init_Ctrl[34].bit[2] = 6;
+ state->Init_Ctrl[34].val[2] = 1;
+ state->Init_Ctrl[34].addr[3] = 168;
+ state->Init_Ctrl[34].bit[3] = 7;
+ state->Init_Ctrl[34].val[3] = 1;
+
+ state->Init_Ctrl[35].Ctrl_Num = SEQ_EXTIQFSMPULSE ;
+ state->Init_Ctrl[35].size = 1 ;
+ state->Init_Ctrl[35].addr[0] = 135;
+ state->Init_Ctrl[35].bit[0] = 0;
+ state->Init_Ctrl[35].val[0] = 0;
+
+ state->Init_Ctrl[36].Ctrl_Num = OVERRIDE_1 ;
+ state->Init_Ctrl[36].size = 1 ;
+ state->Init_Ctrl[36].addr[0] = 56;
+ state->Init_Ctrl[36].bit[0] = 3;
+ state->Init_Ctrl[36].val[0] = 0;
+
+ state->Init_Ctrl[37].Ctrl_Num = BB_INITSTATE_DLPF_TUNE ;
+ state->Init_Ctrl[37].size = 7 ;
+ state->Init_Ctrl[37].addr[0] = 59;
+ state->Init_Ctrl[37].bit[0] = 1;
+ state->Init_Ctrl[37].val[0] = 0;
+ state->Init_Ctrl[37].addr[1] = 59;
+ state->Init_Ctrl[37].bit[1] = 2;
+ state->Init_Ctrl[37].val[1] = 0;
+ state->Init_Ctrl[37].addr[2] = 59;
+ state->Init_Ctrl[37].bit[2] = 3;
+ state->Init_Ctrl[37].val[2] = 0;
+ state->Init_Ctrl[37].addr[3] = 59;
+ state->Init_Ctrl[37].bit[3] = 4;
+ state->Init_Ctrl[37].val[3] = 0;
+ state->Init_Ctrl[37].addr[4] = 59;
+ state->Init_Ctrl[37].bit[4] = 5;
+ state->Init_Ctrl[37].val[4] = 0;
+ state->Init_Ctrl[37].addr[5] = 59;
+ state->Init_Ctrl[37].bit[5] = 6;
+ state->Init_Ctrl[37].val[5] = 0;
+ state->Init_Ctrl[37].addr[6] = 59;
+ state->Init_Ctrl[37].bit[6] = 7;
+ state->Init_Ctrl[37].val[6] = 0;
+
+ state->Init_Ctrl[38].Ctrl_Num = TG_R_DIV ;
+ state->Init_Ctrl[38].size = 6 ;
+ state->Init_Ctrl[38].addr[0] = 32;
+ state->Init_Ctrl[38].bit[0] = 2;
+ state->Init_Ctrl[38].val[0] = 0;
+ state->Init_Ctrl[38].addr[1] = 32;
+ state->Init_Ctrl[38].bit[1] = 3;
+ state->Init_Ctrl[38].val[1] = 0;
+ state->Init_Ctrl[38].addr[2] = 32;
+ state->Init_Ctrl[38].bit[2] = 4;
+ state->Init_Ctrl[38].val[2] = 0;
+ state->Init_Ctrl[38].addr[3] = 32;
+ state->Init_Ctrl[38].bit[3] = 5;
+ state->Init_Ctrl[38].val[3] = 0;
+ state->Init_Ctrl[38].addr[4] = 32;
+ state->Init_Ctrl[38].bit[4] = 6;
+ state->Init_Ctrl[38].val[4] = 1;
+ state->Init_Ctrl[38].addr[5] = 32;
+ state->Init_Ctrl[38].bit[5] = 7;
+ state->Init_Ctrl[38].val[5] = 0;
+
+ state->Init_Ctrl[39].Ctrl_Num = EN_CHP_LIN_B ;
+ state->Init_Ctrl[39].size = 1 ;
+ state->Init_Ctrl[39].addr[0] = 25;
+ state->Init_Ctrl[39].bit[0] = 3;
+ state->Init_Ctrl[39].val[0] = 1;
+
+
+ state->CH_Ctrl_Num = CHCTRL_NUM ;
+
+ state->CH_Ctrl[0].Ctrl_Num = DN_POLY ;
+ state->CH_Ctrl[0].size = 2 ;
+ state->CH_Ctrl[0].addr[0] = 68;
+ state->CH_Ctrl[0].bit[0] = 6;
+ state->CH_Ctrl[0].val[0] = 1;
+ state->CH_Ctrl[0].addr[1] = 68;
+ state->CH_Ctrl[0].bit[1] = 7;
+ state->CH_Ctrl[0].val[1] = 1;
+
+ state->CH_Ctrl[1].Ctrl_Num = DN_RFGAIN ;
+ state->CH_Ctrl[1].size = 2 ;
+ state->CH_Ctrl[1].addr[0] = 70;
+ state->CH_Ctrl[1].bit[0] = 6;
+ state->CH_Ctrl[1].val[0] = 1;
+ state->CH_Ctrl[1].addr[1] = 70;
+ state->CH_Ctrl[1].bit[1] = 7;
+ state->CH_Ctrl[1].val[1] = 0;
+
+ state->CH_Ctrl[2].Ctrl_Num = DN_CAP_RFLPF ;
+ state->CH_Ctrl[2].size = 9 ;
+ state->CH_Ctrl[2].addr[0] = 69;
+ state->CH_Ctrl[2].bit[0] = 5;
+ state->CH_Ctrl[2].val[0] = 0;
+ state->CH_Ctrl[2].addr[1] = 69;
+ state->CH_Ctrl[2].bit[1] = 6;
+ state->CH_Ctrl[2].val[1] = 0;
+ state->CH_Ctrl[2].addr[2] = 69;
+ state->CH_Ctrl[2].bit[2] = 7;
+ state->CH_Ctrl[2].val[2] = 0;
+ state->CH_Ctrl[2].addr[3] = 68;
+ state->CH_Ctrl[2].bit[3] = 0;
+ state->CH_Ctrl[2].val[3] = 0;
+ state->CH_Ctrl[2].addr[4] = 68;
+ state->CH_Ctrl[2].bit[4] = 1;
+ state->CH_Ctrl[2].val[4] = 0;
+ state->CH_Ctrl[2].addr[5] = 68;
+ state->CH_Ctrl[2].bit[5] = 2;
+ state->CH_Ctrl[2].val[5] = 0;
+ state->CH_Ctrl[2].addr[6] = 68;
+ state->CH_Ctrl[2].bit[6] = 3;
+ state->CH_Ctrl[2].val[6] = 0;
+ state->CH_Ctrl[2].addr[7] = 68;
+ state->CH_Ctrl[2].bit[7] = 4;
+ state->CH_Ctrl[2].val[7] = 0;
+ state->CH_Ctrl[2].addr[8] = 68;
+ state->CH_Ctrl[2].bit[8] = 5;
+ state->CH_Ctrl[2].val[8] = 0;
+
+ state->CH_Ctrl[3].Ctrl_Num = DN_EN_VHFUHFBAR ;
+ state->CH_Ctrl[3].size = 1 ;
+ state->CH_Ctrl[3].addr[0] = 70;
+ state->CH_Ctrl[3].bit[0] = 5;
+ state->CH_Ctrl[3].val[0] = 0;
+
+ state->CH_Ctrl[4].Ctrl_Num = DN_GAIN_ADJUST ;
+ state->CH_Ctrl[4].size = 3 ;
+ state->CH_Ctrl[4].addr[0] = 73;
+ state->CH_Ctrl[4].bit[0] = 4;
+ state->CH_Ctrl[4].val[0] = 0;
+ state->CH_Ctrl[4].addr[1] = 73;
+ state->CH_Ctrl[4].bit[1] = 5;
+ state->CH_Ctrl[4].val[1] = 1;
+ state->CH_Ctrl[4].addr[2] = 73;
+ state->CH_Ctrl[4].bit[2] = 6;
+ state->CH_Ctrl[4].val[2] = 0;
+
+ state->CH_Ctrl[5].Ctrl_Num = DN_IQTNBUF_AMP ;
+ state->CH_Ctrl[5].size = 4 ;
+ state->CH_Ctrl[5].addr[0] = 70;
+ state->CH_Ctrl[5].bit[0] = 0;
+ state->CH_Ctrl[5].val[0] = 0;
+ state->CH_Ctrl[5].addr[1] = 70;
+ state->CH_Ctrl[5].bit[1] = 1;
+ state->CH_Ctrl[5].val[1] = 0;
+ state->CH_Ctrl[5].addr[2] = 70;
+ state->CH_Ctrl[5].bit[2] = 2;
+ state->CH_Ctrl[5].val[2] = 0;
+ state->CH_Ctrl[5].addr[3] = 70;
+ state->CH_Ctrl[5].bit[3] = 3;
+ state->CH_Ctrl[5].val[3] = 0;
+
+ state->CH_Ctrl[6].Ctrl_Num = DN_IQTNGNBFBIAS_BST ;
+ state->CH_Ctrl[6].size = 1 ;
+ state->CH_Ctrl[6].addr[0] = 70;
+ state->CH_Ctrl[6].bit[0] = 4;
+ state->CH_Ctrl[6].val[0] = 1;
+
+ state->CH_Ctrl[7].Ctrl_Num = RFSYN_EN_OUTMUX ;
+ state->CH_Ctrl[7].size = 1 ;
+ state->CH_Ctrl[7].addr[0] = 111;
+ state->CH_Ctrl[7].bit[0] = 4;
+ state->CH_Ctrl[7].val[0] = 0;
+
+ state->CH_Ctrl[8].Ctrl_Num = RFSYN_SEL_VCO_OUT ;
+ state->CH_Ctrl[8].size = 1 ;
+ state->CH_Ctrl[8].addr[0] = 111;
+ state->CH_Ctrl[8].bit[0] = 7;
+ state->CH_Ctrl[8].val[0] = 1;
+
+ state->CH_Ctrl[9].Ctrl_Num = RFSYN_SEL_VCO_HI ;
+ state->CH_Ctrl[9].size = 1 ;
+ state->CH_Ctrl[9].addr[0] = 111;
+ state->CH_Ctrl[9].bit[0] = 6;
+ state->CH_Ctrl[9].val[0] = 1;
+
+ state->CH_Ctrl[10].Ctrl_Num = RFSYN_SEL_DIVM ;
+ state->CH_Ctrl[10].size = 1 ;
+ state->CH_Ctrl[10].addr[0] = 111;
+ state->CH_Ctrl[10].bit[0] = 5;
+ state->CH_Ctrl[10].val[0] = 0;
+
+ state->CH_Ctrl[11].Ctrl_Num = RFSYN_RF_DIV_BIAS ;
+ state->CH_Ctrl[11].size = 2 ;
+ state->CH_Ctrl[11].addr[0] = 110;
+ state->CH_Ctrl[11].bit[0] = 0;
+ state->CH_Ctrl[11].val[0] = 1;
+ state->CH_Ctrl[11].addr[1] = 110;
+ state->CH_Ctrl[11].bit[1] = 1;
+ state->CH_Ctrl[11].val[1] = 0;
+
+ state->CH_Ctrl[12].Ctrl_Num = DN_SEL_FREQ ;
+ state->CH_Ctrl[12].size = 3 ;
+ state->CH_Ctrl[12].addr[0] = 69;
+ state->CH_Ctrl[12].bit[0] = 2;
+ state->CH_Ctrl[12].val[0] = 0;
+ state->CH_Ctrl[12].addr[1] = 69;
+ state->CH_Ctrl[12].bit[1] = 3;
+ state->CH_Ctrl[12].val[1] = 0;
+ state->CH_Ctrl[12].addr[2] = 69;
+ state->CH_Ctrl[12].bit[2] = 4;
+ state->CH_Ctrl[12].val[2] = 0;
+
+ state->CH_Ctrl[13].Ctrl_Num = RFSYN_VCO_BIAS ;
+ state->CH_Ctrl[13].size = 6 ;
+ state->CH_Ctrl[13].addr[0] = 110;
+ state->CH_Ctrl[13].bit[0] = 2;
+ state->CH_Ctrl[13].val[0] = 0;
+ state->CH_Ctrl[13].addr[1] = 110;
+ state->CH_Ctrl[13].bit[1] = 3;
+ state->CH_Ctrl[13].val[1] = 0;
+ state->CH_Ctrl[13].addr[2] = 110;
+ state->CH_Ctrl[13].bit[2] = 4;
+ state->CH_Ctrl[13].val[2] = 0;
+ state->CH_Ctrl[13].addr[3] = 110;
+ state->CH_Ctrl[13].bit[3] = 5;
+ state->CH_Ctrl[13].val[3] = 0;
+ state->CH_Ctrl[13].addr[4] = 110;
+ state->CH_Ctrl[13].bit[4] = 6;
+ state->CH_Ctrl[13].val[4] = 0;
+ state->CH_Ctrl[13].addr[5] = 110;
+ state->CH_Ctrl[13].bit[5] = 7;
+ state->CH_Ctrl[13].val[5] = 1;
+
+ state->CH_Ctrl[14].Ctrl_Num = CHCAL_INT_MOD_RF ;
+ state->CH_Ctrl[14].size = 7 ;
+ state->CH_Ctrl[14].addr[0] = 14;
+ state->CH_Ctrl[14].bit[0] = 0;
+ state->CH_Ctrl[14].val[0] = 0;
+ state->CH_Ctrl[14].addr[1] = 14;
+ state->CH_Ctrl[14].bit[1] = 1;
+ state->CH_Ctrl[14].val[1] = 0;
+ state->CH_Ctrl[14].addr[2] = 14;
+ state->CH_Ctrl[14].bit[2] = 2;
+ state->CH_Ctrl[14].val[2] = 0;
+ state->CH_Ctrl[14].addr[3] = 14;
+ state->CH_Ctrl[14].bit[3] = 3;
+ state->CH_Ctrl[14].val[3] = 0;
+ state->CH_Ctrl[14].addr[4] = 14;
+ state->CH_Ctrl[14].bit[4] = 4;
+ state->CH_Ctrl[14].val[4] = 0;
+ state->CH_Ctrl[14].addr[5] = 14;
+ state->CH_Ctrl[14].bit[5] = 5;
+ state->CH_Ctrl[14].val[5] = 0;
+ state->CH_Ctrl[14].addr[6] = 14;
+ state->CH_Ctrl[14].bit[6] = 6;
+ state->CH_Ctrl[14].val[6] = 0;
+
+ state->CH_Ctrl[15].Ctrl_Num = CHCAL_FRAC_MOD_RF ;
+ state->CH_Ctrl[15].size = 18 ;
+ state->CH_Ctrl[15].addr[0] = 17;
+ state->CH_Ctrl[15].bit[0] = 6;
+ state->CH_Ctrl[15].val[0] = 0;
+ state->CH_Ctrl[15].addr[1] = 17;
+ state->CH_Ctrl[15].bit[1] = 7;
+ state->CH_Ctrl[15].val[1] = 0;
+ state->CH_Ctrl[15].addr[2] = 16;
+ state->CH_Ctrl[15].bit[2] = 0;
+ state->CH_Ctrl[15].val[2] = 0;
+ state->CH_Ctrl[15].addr[3] = 16;
+ state->CH_Ctrl[15].bit[3] = 1;
+ state->CH_Ctrl[15].val[3] = 0;
+ state->CH_Ctrl[15].addr[4] = 16;
+ state->CH_Ctrl[15].bit[4] = 2;
+ state->CH_Ctrl[15].val[4] = 0;
+ state->CH_Ctrl[15].addr[5] = 16;
+ state->CH_Ctrl[15].bit[5] = 3;
+ state->CH_Ctrl[15].val[5] = 0;
+ state->CH_Ctrl[15].addr[6] = 16;
+ state->CH_Ctrl[15].bit[6] = 4;
+ state->CH_Ctrl[15].val[6] = 0;
+ state->CH_Ctrl[15].addr[7] = 16;
+ state->CH_Ctrl[15].bit[7] = 5;
+ state->CH_Ctrl[15].val[7] = 0;
+ state->CH_Ctrl[15].addr[8] = 16;
+ state->CH_Ctrl[15].bit[8] = 6;
+ state->CH_Ctrl[15].val[8] = 0;
+ state->CH_Ctrl[15].addr[9] = 16;
+ state->CH_Ctrl[15].bit[9] = 7;
+ state->CH_Ctrl[15].val[9] = 0;
+ state->CH_Ctrl[15].addr[10] = 15;
+ state->CH_Ctrl[15].bit[10] = 0;
+ state->CH_Ctrl[15].val[10] = 0;
+ state->CH_Ctrl[15].addr[11] = 15;
+ state->CH_Ctrl[15].bit[11] = 1;
+ state->CH_Ctrl[15].val[11] = 0;
+ state->CH_Ctrl[15].addr[12] = 15;
+ state->CH_Ctrl[15].bit[12] = 2;
+ state->CH_Ctrl[15].val[12] = 0;
+ state->CH_Ctrl[15].addr[13] = 15;
+ state->CH_Ctrl[15].bit[13] = 3;
+ state->CH_Ctrl[15].val[13] = 0;
+ state->CH_Ctrl[15].addr[14] = 15;
+ state->CH_Ctrl[15].bit[14] = 4;
+ state->CH_Ctrl[15].val[14] = 0;
+ state->CH_Ctrl[15].addr[15] = 15;
+ state->CH_Ctrl[15].bit[15] = 5;
+ state->CH_Ctrl[15].val[15] = 0;
+ state->CH_Ctrl[15].addr[16] = 15;
+ state->CH_Ctrl[15].bit[16] = 6;
+ state->CH_Ctrl[15].val[16] = 1;
+ state->CH_Ctrl[15].addr[17] = 15;
+ state->CH_Ctrl[15].bit[17] = 7;
+ state->CH_Ctrl[15].val[17] = 1;
+
+ state->CH_Ctrl[16].Ctrl_Num = RFSYN_LPF_R ;
+ state->CH_Ctrl[16].size = 5 ;
+ state->CH_Ctrl[16].addr[0] = 112;
+ state->CH_Ctrl[16].bit[0] = 0;
+ state->CH_Ctrl[16].val[0] = 0;
+ state->CH_Ctrl[16].addr[1] = 112;
+ state->CH_Ctrl[16].bit[1] = 1;
+ state->CH_Ctrl[16].val[1] = 0;
+ state->CH_Ctrl[16].addr[2] = 112;
+ state->CH_Ctrl[16].bit[2] = 2;
+ state->CH_Ctrl[16].val[2] = 0;
+ state->CH_Ctrl[16].addr[3] = 112;
+ state->CH_Ctrl[16].bit[3] = 3;
+ state->CH_Ctrl[16].val[3] = 0;
+ state->CH_Ctrl[16].addr[4] = 112;
+ state->CH_Ctrl[16].bit[4] = 4;
+ state->CH_Ctrl[16].val[4] = 1;
+
+ state->CH_Ctrl[17].Ctrl_Num = CHCAL_EN_INT_RF ;
+ state->CH_Ctrl[17].size = 1 ;
+ state->CH_Ctrl[17].addr[0] = 14;
+ state->CH_Ctrl[17].bit[0] = 7;
+ state->CH_Ctrl[17].val[0] = 0;
+
+ state->CH_Ctrl[18].Ctrl_Num = TG_LO_DIVVAL ;
+ state->CH_Ctrl[18].size = 4 ;
+ state->CH_Ctrl[18].addr[0] = 107;
+ state->CH_Ctrl[18].bit[0] = 3;
+ state->CH_Ctrl[18].val[0] = 0;
+ state->CH_Ctrl[18].addr[1] = 107;
+ state->CH_Ctrl[18].bit[1] = 4;
+ state->CH_Ctrl[18].val[1] = 0;
+ state->CH_Ctrl[18].addr[2] = 107;
+ state->CH_Ctrl[18].bit[2] = 5;
+ state->CH_Ctrl[18].val[2] = 0;
+ state->CH_Ctrl[18].addr[3] = 107;
+ state->CH_Ctrl[18].bit[3] = 6;
+ state->CH_Ctrl[18].val[3] = 0;
+
+ state->CH_Ctrl[19].Ctrl_Num = TG_LO_SELVAL ;
+ state->CH_Ctrl[19].size = 3 ;
+ state->CH_Ctrl[19].addr[0] = 107;
+ state->CH_Ctrl[19].bit[0] = 7;
+ state->CH_Ctrl[19].val[0] = 1;
+ state->CH_Ctrl[19].addr[1] = 106;
+ state->CH_Ctrl[19].bit[1] = 0;
+ state->CH_Ctrl[19].val[1] = 1;
+ state->CH_Ctrl[19].addr[2] = 106;
+ state->CH_Ctrl[19].bit[2] = 1;
+ state->CH_Ctrl[19].val[2] = 1;
+
+ state->CH_Ctrl[20].Ctrl_Num = TG_DIV_VAL ;
+ state->CH_Ctrl[20].size = 11 ;
+ state->CH_Ctrl[20].addr[0] = 109;
+ state->CH_Ctrl[20].bit[0] = 2;
+ state->CH_Ctrl[20].val[0] = 0;
+ state->CH_Ctrl[20].addr[1] = 109;
+ state->CH_Ctrl[20].bit[1] = 3;
+ state->CH_Ctrl[20].val[1] = 0;
+ state->CH_Ctrl[20].addr[2] = 109;
+ state->CH_Ctrl[20].bit[2] = 4;
+ state->CH_Ctrl[20].val[2] = 0;
+ state->CH_Ctrl[20].addr[3] = 109;
+ state->CH_Ctrl[20].bit[3] = 5;
+ state->CH_Ctrl[20].val[3] = 0;
+ state->CH_Ctrl[20].addr[4] = 109;
+ state->CH_Ctrl[20].bit[4] = 6;
+ state->CH_Ctrl[20].val[4] = 0;
+ state->CH_Ctrl[20].addr[5] = 109;
+ state->CH_Ctrl[20].bit[5] = 7;
+ state->CH_Ctrl[20].val[5] = 0;
+ state->CH_Ctrl[20].addr[6] = 108;
+ state->CH_Ctrl[20].bit[6] = 0;
+ state->CH_Ctrl[20].val[6] = 0;
+ state->CH_Ctrl[20].addr[7] = 108;
+ state->CH_Ctrl[20].bit[7] = 1;
+ state->CH_Ctrl[20].val[7] = 0;
+ state->CH_Ctrl[20].addr[8] = 108;
+ state->CH_Ctrl[20].bit[8] = 2;
+ state->CH_Ctrl[20].val[8] = 1;
+ state->CH_Ctrl[20].addr[9] = 108;
+ state->CH_Ctrl[20].bit[9] = 3;
+ state->CH_Ctrl[20].val[9] = 1;
+ state->CH_Ctrl[20].addr[10] = 108;
+ state->CH_Ctrl[20].bit[10] = 4;
+ state->CH_Ctrl[20].val[10] = 1;
+
+ state->CH_Ctrl[21].Ctrl_Num = TG_VCO_BIAS ;
+ state->CH_Ctrl[21].size = 6 ;
+ state->CH_Ctrl[21].addr[0] = 106;
+ state->CH_Ctrl[21].bit[0] = 2;
+ state->CH_Ctrl[21].val[0] = 0;
+ state->CH_Ctrl[21].addr[1] = 106;
+ state->CH_Ctrl[21].bit[1] = 3;
+ state->CH_Ctrl[21].val[1] = 0;
+ state->CH_Ctrl[21].addr[2] = 106;
+ state->CH_Ctrl[21].bit[2] = 4;
+ state->CH_Ctrl[21].val[2] = 0;
+ state->CH_Ctrl[21].addr[3] = 106;
+ state->CH_Ctrl[21].bit[3] = 5;
+ state->CH_Ctrl[21].val[3] = 0;
+ state->CH_Ctrl[21].addr[4] = 106;
+ state->CH_Ctrl[21].bit[4] = 6;
+ state->CH_Ctrl[21].val[4] = 0;
+ state->CH_Ctrl[21].addr[5] = 106;
+ state->CH_Ctrl[21].bit[5] = 7;
+ state->CH_Ctrl[21].val[5] = 1;
+
+ state->CH_Ctrl[22].Ctrl_Num = SEQ_EXTPOWERUP ;
+ state->CH_Ctrl[22].size = 1 ;
+ state->CH_Ctrl[22].addr[0] = 138;
+ state->CH_Ctrl[22].bit[0] = 4;
+ state->CH_Ctrl[22].val[0] = 1;
+
+ state->CH_Ctrl[23].Ctrl_Num = OVERRIDE_2 ;
+ state->CH_Ctrl[23].size = 1 ;
+ state->CH_Ctrl[23].addr[0] = 17;
+ state->CH_Ctrl[23].bit[0] = 5;
+ state->CH_Ctrl[23].val[0] = 0;
+
+ state->CH_Ctrl[24].Ctrl_Num = OVERRIDE_3 ;
+ state->CH_Ctrl[24].size = 1 ;
+ state->CH_Ctrl[24].addr[0] = 111;
+ state->CH_Ctrl[24].bit[0] = 3;
+ state->CH_Ctrl[24].val[0] = 0;
+
+ state->CH_Ctrl[25].Ctrl_Num = OVERRIDE_4 ;
+ state->CH_Ctrl[25].size = 1 ;
+ state->CH_Ctrl[25].addr[0] = 112;
+ state->CH_Ctrl[25].bit[0] = 7;
+ state->CH_Ctrl[25].val[0] = 0;
+
+ state->CH_Ctrl[26].Ctrl_Num = SEQ_FSM_PULSE ;
+ state->CH_Ctrl[26].size = 1 ;
+ state->CH_Ctrl[26].addr[0] = 136;
+ state->CH_Ctrl[26].bit[0] = 7;
+ state->CH_Ctrl[26].val[0] = 0;
+
+ state->CH_Ctrl[27].Ctrl_Num = GPIO_4B ;
+ state->CH_Ctrl[27].size = 1 ;
+ state->CH_Ctrl[27].addr[0] = 149;
+ state->CH_Ctrl[27].bit[0] = 7;
+ state->CH_Ctrl[27].val[0] = 0;
+
+ state->CH_Ctrl[28].Ctrl_Num = GPIO_3B ;
+ state->CH_Ctrl[28].size = 1 ;
+ state->CH_Ctrl[28].addr[0] = 149;
+ state->CH_Ctrl[28].bit[0] = 6;
+ state->CH_Ctrl[28].val[0] = 0;
+
+ state->CH_Ctrl[29].Ctrl_Num = GPIO_4 ;
+ state->CH_Ctrl[29].size = 1 ;
+ state->CH_Ctrl[29].addr[0] = 149;
+ state->CH_Ctrl[29].bit[0] = 5;
+ state->CH_Ctrl[29].val[0] = 1;
+
+ state->CH_Ctrl[30].Ctrl_Num = GPIO_3 ;
+ state->CH_Ctrl[30].size = 1 ;
+ state->CH_Ctrl[30].addr[0] = 149;
+ state->CH_Ctrl[30].bit[0] = 4;
+ state->CH_Ctrl[30].val[0] = 1;
+
+ state->CH_Ctrl[31].Ctrl_Num = GPIO_1B ;
+ state->CH_Ctrl[31].size = 1 ;
+ state->CH_Ctrl[31].addr[0] = 149;
+ state->CH_Ctrl[31].bit[0] = 3;
+ state->CH_Ctrl[31].val[0] = 0;
+
+ state->CH_Ctrl[32].Ctrl_Num = DAC_A_ENABLE ;
+ state->CH_Ctrl[32].size = 1 ;
+ state->CH_Ctrl[32].addr[0] = 93;
+ state->CH_Ctrl[32].bit[0] = 1;
+ state->CH_Ctrl[32].val[0] = 0;
+
+ state->CH_Ctrl[33].Ctrl_Num = DAC_B_ENABLE ;
+ state->CH_Ctrl[33].size = 1 ;
+ state->CH_Ctrl[33].addr[0] = 93;
+ state->CH_Ctrl[33].bit[0] = 0;
+ state->CH_Ctrl[33].val[0] = 0;
+
+ state->CH_Ctrl[34].Ctrl_Num = DAC_DIN_A ;
+ state->CH_Ctrl[34].size = 6 ;
+ state->CH_Ctrl[34].addr[0] = 92;
+ state->CH_Ctrl[34].bit[0] = 2;
+ state->CH_Ctrl[34].val[0] = 0;
+ state->CH_Ctrl[34].addr[1] = 92;
+ state->CH_Ctrl[34].bit[1] = 3;
+ state->CH_Ctrl[34].val[1] = 0;
+ state->CH_Ctrl[34].addr[2] = 92;
+ state->CH_Ctrl[34].bit[2] = 4;
+ state->CH_Ctrl[34].val[2] = 0;
+ state->CH_Ctrl[34].addr[3] = 92;
+ state->CH_Ctrl[34].bit[3] = 5;
+ state->CH_Ctrl[34].val[3] = 0;
+ state->CH_Ctrl[34].addr[4] = 92;
+ state->CH_Ctrl[34].bit[4] = 6;
+ state->CH_Ctrl[34].val[4] = 0;
+ state->CH_Ctrl[34].addr[5] = 92;
+ state->CH_Ctrl[34].bit[5] = 7;
+ state->CH_Ctrl[34].val[5] = 0;
+
+ state->CH_Ctrl[35].Ctrl_Num = DAC_DIN_B ;
+ state->CH_Ctrl[35].size = 6 ;
+ state->CH_Ctrl[35].addr[0] = 93;
+ state->CH_Ctrl[35].bit[0] = 2;
+ state->CH_Ctrl[35].val[0] = 0;
+ state->CH_Ctrl[35].addr[1] = 93;
+ state->CH_Ctrl[35].bit[1] = 3;
+ state->CH_Ctrl[35].val[1] = 0;
+ state->CH_Ctrl[35].addr[2] = 93;
+ state->CH_Ctrl[35].bit[2] = 4;
+ state->CH_Ctrl[35].val[2] = 0;
+ state->CH_Ctrl[35].addr[3] = 93;
+ state->CH_Ctrl[35].bit[3] = 5;
+ state->CH_Ctrl[35].val[3] = 0;
+ state->CH_Ctrl[35].addr[4] = 93;
+ state->CH_Ctrl[35].bit[4] = 6;
+ state->CH_Ctrl[35].val[4] = 0;
+ state->CH_Ctrl[35].addr[5] = 93;
+ state->CH_Ctrl[35].bit[5] = 7;
+ state->CH_Ctrl[35].val[5] = 0;
+
+#ifdef _MXL_PRODUCTION
+ state->CH_Ctrl[36].Ctrl_Num = RFSYN_EN_DIV ;
+ state->CH_Ctrl[36].size = 1 ;
+ state->CH_Ctrl[36].addr[0] = 109;
+ state->CH_Ctrl[36].bit[0] = 1;
+ state->CH_Ctrl[36].val[0] = 1;
+
+ state->CH_Ctrl[37].Ctrl_Num = RFSYN_DIVM ;
+ state->CH_Ctrl[37].size = 2 ;
+ state->CH_Ctrl[37].addr[0] = 112;
+ state->CH_Ctrl[37].bit[0] = 5;
+ state->CH_Ctrl[37].val[0] = 0;
+ state->CH_Ctrl[37].addr[1] = 112;
+ state->CH_Ctrl[37].bit[1] = 6;
+ state->CH_Ctrl[37].val[1] = 0;
+
+ state->CH_Ctrl[38].Ctrl_Num = DN_BYPASS_AGC_I2C ;
+ state->CH_Ctrl[38].size = 1 ;
+ state->CH_Ctrl[38].addr[0] = 65;
+ state->CH_Ctrl[38].bit[0] = 1;
+ state->CH_Ctrl[38].val[0] = 0;
+#endif
+
+ return 0 ;
+}
+
+static void InitTunerControls(struct dvb_frontend *fe)
+{
+ MXL5005_RegisterInit(fe);
+ MXL5005_ControlInit(fe);
+#ifdef _MXL_INTERNAL
+ MXL5005_MXLControlInit(fe);
+#endif
+}
+
+static u16 MXL5005_TunerConfig(struct dvb_frontend *fe,
+ u8 Mode, /* 0: Analog Mode ; 1: Digital Mode */
+ u8 IF_mode, /* for Analog Mode, 0: zero IF; 1: low IF */
+ u32 Bandwidth, /* filter channel bandwidth (6, 7, 8) */
+ u32 IF_out, /* Desired IF Out Frequency */
+ u32 Fxtal, /* XTAL Frequency */
+ u8 AGC_Mode, /* AGC Mode - Dual AGC: 0, Single AGC: 1 */
+ u16 TOP, /* 0: Dual AGC; Value: take over point */
+ u16 IF_OUT_LOAD, /* IF Out Load Resistor (200 / 300 Ohms) */
+ u8 CLOCK_OUT, /* 0: turn off clk out; 1: turn on clock out */
+ u8 DIV_OUT, /* 0: Div-1; 1: Div-4 */
+ u8 CAPSELECT, /* 0: disable On-Chip pulling cap; 1: enable */
+ u8 EN_RSSI, /* 0: disable RSSI; 1: enable RSSI */
+
+ /* Modulation Type; */
+ /* 0 - Default; 1 - DVB-T; 2 - ATSC; 3 - QAM; 4 - Analog Cable */
+ u8 Mod_Type,
+
+ /* Tracking Filter */
+ /* 0 - Default; 1 - Off; 2 - Type C; 3 - Type C-H */
+ u8 TF_Type
+ )
+{
+ struct mxl5005s_state *state = fe->tuner_priv;
+ u16 status = 0;
+
+ state->Mode = Mode;
+ state->IF_Mode = IF_mode;
+ state->Chan_Bandwidth = Bandwidth;
+ state->IF_OUT = IF_out;
+ state->Fxtal = Fxtal;
+ state->AGC_Mode = AGC_Mode;
+ state->TOP = TOP;
+ state->IF_OUT_LOAD = IF_OUT_LOAD;
+ state->CLOCK_OUT = CLOCK_OUT;
+ state->DIV_OUT = DIV_OUT;
+ state->CAPSELECT = CAPSELECT;
+ state->EN_RSSI = EN_RSSI;
+ state->Mod_Type = Mod_Type;
+ state->TF_Type = TF_Type;
+
+ /* Initialize all the controls and registers */
+ InitTunerControls(fe);
+
+ /* Synthesizer LO frequency calculation */
+ MXL_SynthIFLO_Calc(fe);
+
+ return status;
+}
+
+static void MXL_SynthIFLO_Calc(struct dvb_frontend *fe)
+{
+ struct mxl5005s_state *state = fe->tuner_priv;
+ if (state->Mode == 1) /* Digital Mode */
+ state->IF_LO = state->IF_OUT;
+ else /* Analog Mode */ {
+ if (state->IF_Mode == 0) /* Analog Zero IF mode */
+ state->IF_LO = state->IF_OUT + 400000;
+ else /* Analog Low IF mode */
+ state->IF_LO = state->IF_OUT + state->Chan_Bandwidth/2;
+ }
+}
+
+static void MXL_SynthRFTGLO_Calc(struct dvb_frontend *fe)
+{
+ struct mxl5005s_state *state = fe->tuner_priv;
+
+ if (state->Mode == 1) /* Digital Mode */ {
+ /* remove 20.48MHz setting for 2.6.10 */
+ state->RF_LO = state->RF_IN;
+ /* change for 2.6.6 */
+ state->TG_LO = state->RF_IN - 750000;
+ } else /* Analog Mode */ {
+ if (state->IF_Mode == 0) /* Analog Zero IF mode */ {
+ state->RF_LO = state->RF_IN - 400000;
+ state->TG_LO = state->RF_IN - 1750000;
+ } else /* Analog Low IF mode */ {
+ state->RF_LO = state->RF_IN - state->Chan_Bandwidth/2;
+ state->TG_LO = state->RF_IN -
+ state->Chan_Bandwidth + 500000;
+ }
+ }
+}
+
+static u16 MXL_OverwriteICDefault(struct dvb_frontend *fe)
+{
+ u16 status = 0;
+
+ status += MXL_ControlWrite(fe, OVERRIDE_1, 1);
+ status += MXL_ControlWrite(fe, OVERRIDE_2, 1);
+ status += MXL_ControlWrite(fe, OVERRIDE_3, 1);
+ status += MXL_ControlWrite(fe, OVERRIDE_4, 1);
+
+ return status;
+}
+
+static u16 MXL_BlockInit(struct dvb_frontend *fe)
+{
+ struct mxl5005s_state *state = fe->tuner_priv;
+ u16 status = 0;
+
+ status += MXL_OverwriteICDefault(fe);
+
+ /* Downconverter Control Dig Ana */
+ status += MXL_ControlWrite(fe, DN_IQTN_AMP_CUT, state->Mode ? 1 : 0);
+
+ /* Filter Control Dig Ana */
+ status += MXL_ControlWrite(fe, BB_MODE, state->Mode ? 0 : 1);
+ status += MXL_ControlWrite(fe, BB_BUF, state->Mode ? 3 : 2);
+ status += MXL_ControlWrite(fe, BB_BUF_OA, state->Mode ? 1 : 0);
+ status += MXL_ControlWrite(fe, BB_IQSWAP, state->Mode ? 0 : 1);
+ status += MXL_ControlWrite(fe, BB_INITSTATE_DLPF_TUNE, 0);
+
+ /* Initialize Low-Pass Filter */
+ if (state->Mode) { /* Digital Mode */
+ switch (state->Chan_Bandwidth) {
+ case 8000000:
+ status += MXL_ControlWrite(fe, BB_DLPF_BANDSEL, 0);
+ break;
+ case 7000000:
+ status += MXL_ControlWrite(fe, BB_DLPF_BANDSEL, 2);
+ break;
+ case 6000000:
+ status += MXL_ControlWrite(fe,
+ BB_DLPF_BANDSEL, 3);
+ break;
+ }
+ } else { /* Analog Mode */
+ switch (state->Chan_Bandwidth) {
+ case 8000000: /* Low Zero */
+ status += MXL_ControlWrite(fe, BB_ALPF_BANDSELECT,
+ (state->IF_Mode ? 0 : 3));
+ break;
+ case 7000000:
+ status += MXL_ControlWrite(fe, BB_ALPF_BANDSELECT,
+ (state->IF_Mode ? 1 : 4));
+ break;
+ case 6000000:
+ status += MXL_ControlWrite(fe, BB_ALPF_BANDSELECT,
+ (state->IF_Mode ? 2 : 5));
+ break;
+ }
+ }
+
+ /* Charge Pump Control Dig Ana */
+ status += MXL_ControlWrite(fe, RFSYN_CHP_GAIN, state->Mode ? 5 : 8);
+ status += MXL_ControlWrite(fe,
+ RFSYN_EN_CHP_HIGAIN, state->Mode ? 1 : 1);
+ status += MXL_ControlWrite(fe, EN_CHP_LIN_B, state->Mode ? 0 : 0);
+
+ /* AGC TOP Control */
+ if (state->AGC_Mode == 0) /* Dual AGC */ {
+ status += MXL_ControlWrite(fe, AGC_IF, 15);
+ status += MXL_ControlWrite(fe, AGC_RF, 15);
+ } else /* Single AGC Mode Dig Ana */
+ status += MXL_ControlWrite(fe, AGC_RF, state->Mode ? 15 : 12);
+
+ if (state->TOP == 55) /* TOP == 5.5 */
+ status += MXL_ControlWrite(fe, AGC_IF, 0x0);
+
+ if (state->TOP == 72) /* TOP == 7.2 */
+ status += MXL_ControlWrite(fe, AGC_IF, 0x1);
+
+ if (state->TOP == 92) /* TOP == 9.2 */
+ status += MXL_ControlWrite(fe, AGC_IF, 0x2);
+
+ if (state->TOP == 110) /* TOP == 11.0 */
+ status += MXL_ControlWrite(fe, AGC_IF, 0x3);
+
+ if (state->TOP == 129) /* TOP == 12.9 */
+ status += MXL_ControlWrite(fe, AGC_IF, 0x4);
+
+ if (state->TOP == 147) /* TOP == 14.7 */
+ status += MXL_ControlWrite(fe, AGC_IF, 0x5);
+
+ if (state->TOP == 168) /* TOP == 16.8 */
+ status += MXL_ControlWrite(fe, AGC_IF, 0x6);
+
+ if (state->TOP == 194) /* TOP == 19.4 */
+ status += MXL_ControlWrite(fe, AGC_IF, 0x7);
+
+ if (state->TOP == 212) /* TOP == 21.2 */
+ status += MXL_ControlWrite(fe, AGC_IF, 0x9);
+
+ if (state->TOP == 232) /* TOP == 23.2 */
+ status += MXL_ControlWrite(fe, AGC_IF, 0xA);
+
+ if (state->TOP == 252) /* TOP == 25.2 */
+ status += MXL_ControlWrite(fe, AGC_IF, 0xB);
+
+ if (state->TOP == 271) /* TOP == 27.1 */
+ status += MXL_ControlWrite(fe, AGC_IF, 0xC);
+
+ if (state->TOP == 292) /* TOP == 29.2 */
+ status += MXL_ControlWrite(fe, AGC_IF, 0xD);
+
+ if (state->TOP == 317) /* TOP == 31.7 */
+ status += MXL_ControlWrite(fe, AGC_IF, 0xE);
+
+ if (state->TOP == 349) /* TOP == 34.9 */
+ status += MXL_ControlWrite(fe, AGC_IF, 0xF);
+
+ /* IF Synthesizer Control */
+ status += MXL_IFSynthInit(fe);
+
+ /* IF UpConverter Control */
+ if (state->IF_OUT_LOAD == 200) {
+ status += MXL_ControlWrite(fe, DRV_RES_SEL, 6);
+ status += MXL_ControlWrite(fe, I_DRIVER, 2);
+ }
+ if (state->IF_OUT_LOAD == 300) {
+ status += MXL_ControlWrite(fe, DRV_RES_SEL, 4);
+ status += MXL_ControlWrite(fe, I_DRIVER, 1);
+ }
+
+ /* Anti-Alias Filtering Control
+ * initialise Anti-Aliasing Filter
+ */
+ if (state->Mode) { /* Digital Mode */
+ if (state->IF_OUT >= 4000000UL && state->IF_OUT <= 6280000UL) {
+ status += MXL_ControlWrite(fe, EN_AAF, 1);
+ status += MXL_ControlWrite(fe, EN_3P, 1);
+ status += MXL_ControlWrite(fe, EN_AUX_3P, 1);
+ status += MXL_ControlWrite(fe, SEL_AAF_BAND, 0);
+ }
+ if ((state->IF_OUT == 36125000UL) ||
+ (state->IF_OUT == 36150000UL)) {
+ status += MXL_ControlWrite(fe, EN_AAF, 1);
+ status += MXL_ControlWrite(fe, EN_3P, 1);
+ status += MXL_ControlWrite(fe, EN_AUX_3P, 1);
+ status += MXL_ControlWrite(fe, SEL_AAF_BAND, 1);
+ }
+ if (state->IF_OUT > 36150000UL) {
+ status += MXL_ControlWrite(fe, EN_AAF, 0);
+ status += MXL_ControlWrite(fe, EN_3P, 1);
+ status += MXL_ControlWrite(fe, EN_AUX_3P, 1);
+ status += MXL_ControlWrite(fe, SEL_AAF_BAND, 1);
+ }
+ } else { /* Analog Mode */
+ if (state->IF_OUT >= 4000000UL && state->IF_OUT <= 5000000UL) {
+ status += MXL_ControlWrite(fe, EN_AAF, 1);
+ status += MXL_ControlWrite(fe, EN_3P, 1);
+ status += MXL_ControlWrite(fe, EN_AUX_3P, 1);
+ status += MXL_ControlWrite(fe, SEL_AAF_BAND, 0);
+ }
+ if (state->IF_OUT > 5000000UL) {
+ status += MXL_ControlWrite(fe, EN_AAF, 0);
+ status += MXL_ControlWrite(fe, EN_3P, 0);
+ status += MXL_ControlWrite(fe, EN_AUX_3P, 0);
+ status += MXL_ControlWrite(fe, SEL_AAF_BAND, 0);
+ }
+ }
+
+ /* Demod Clock Out */
+ if (state->CLOCK_OUT)
+ status += MXL_ControlWrite(fe, SEQ_ENCLK16_CLK_OUT, 1);
+ else
+ status += MXL_ControlWrite(fe, SEQ_ENCLK16_CLK_OUT, 0);
+
+ if (state->DIV_OUT == 1)
+ status += MXL_ControlWrite(fe, SEQ_SEL4_16B, 1);
+ if (state->DIV_OUT == 0)
+ status += MXL_ControlWrite(fe, SEQ_SEL4_16B, 0);
+
+ /* Crystal Control */
+ if (state->CAPSELECT)
+ status += MXL_ControlWrite(fe, XTAL_CAPSELECT, 1);
+ else
+ status += MXL_ControlWrite(fe, XTAL_CAPSELECT, 0);
+
+ if (state->Fxtal >= 12000000UL && state->Fxtal <= 16000000UL)
+ status += MXL_ControlWrite(fe, IF_SEL_DBL, 1);
+ if (state->Fxtal > 16000000UL && state->Fxtal <= 32000000UL)
+ status += MXL_ControlWrite(fe, IF_SEL_DBL, 0);
+
+ if (state->Fxtal >= 12000000UL && state->Fxtal <= 22000000UL)
+ status += MXL_ControlWrite(fe, RFSYN_R_DIV, 3);
+ if (state->Fxtal > 22000000UL && state->Fxtal <= 32000000UL)
+ status += MXL_ControlWrite(fe, RFSYN_R_DIV, 0);
+
+ /* Misc Controls */
+ if (state->Mode == 0 && state->IF_Mode == 1) /* Analog LowIF mode */
+ status += MXL_ControlWrite(fe, SEQ_EXTIQFSMPULSE, 0);
+ else
+ status += MXL_ControlWrite(fe, SEQ_EXTIQFSMPULSE, 1);
+
+ /* status += MXL_ControlRead(fe, IF_DIVVAL, &IF_DIVVAL_Val); */
+
+ /* Set TG_R_DIV */
+ status += MXL_ControlWrite(fe, TG_R_DIV,
+ MXL_Ceiling(state->Fxtal, 1000000));
+
+ /* Apply Default value to BB_INITSTATE_DLPF_TUNE */
+
+ /* RSSI Control */
+ if (state->EN_RSSI) {
+ status += MXL_ControlWrite(fe, SEQ_EXTSYNTHCALIF, 1);
+ status += MXL_ControlWrite(fe, SEQ_EXTDCCAL, 1);
+ status += MXL_ControlWrite(fe, AGC_EN_RSSI, 1);
+ status += MXL_ControlWrite(fe, RFA_ENCLKRFAGC, 1);
+
+ /* RSSI reference point */
+ status += MXL_ControlWrite(fe, RFA_RSSI_REF, 2);
+ status += MXL_ControlWrite(fe, RFA_RSSI_REFH, 3);
+ status += MXL_ControlWrite(fe, RFA_RSSI_REFL, 1);
+
+ /* TOP point */
+ status += MXL_ControlWrite(fe, RFA_FLR, 0);
+ status += MXL_ControlWrite(fe, RFA_CEIL, 12);
+ }
+
+ /* Modulation type bit settings
+ * Override the control values preset
+ */
+ if (state->Mod_Type == MXL_DVBT) /* DVB-T Mode */ {
+ state->AGC_Mode = 1; /* Single AGC Mode */
+
+ /* Enable RSSI */
+ status += MXL_ControlWrite(fe, SEQ_EXTSYNTHCALIF, 1);
+ status += MXL_ControlWrite(fe, SEQ_EXTDCCAL, 1);
+ status += MXL_ControlWrite(fe, AGC_EN_RSSI, 1);
+ status += MXL_ControlWrite(fe, RFA_ENCLKRFAGC, 1);
+
+ /* RSSI reference point */
+ status += MXL_ControlWrite(fe, RFA_RSSI_REF, 3);
+ status += MXL_ControlWrite(fe, RFA_RSSI_REFH, 5);
+ status += MXL_ControlWrite(fe, RFA_RSSI_REFL, 1);
+
+ /* TOP point */
+ status += MXL_ControlWrite(fe, RFA_FLR, 2);
+ status += MXL_ControlWrite(fe, RFA_CEIL, 13);
+ if (state->IF_OUT <= 6280000UL) /* Low IF */
+ status += MXL_ControlWrite(fe, BB_IQSWAP, 0);
+ else /* High IF */
+ status += MXL_ControlWrite(fe, BB_IQSWAP, 1);
+
+ }
+ if (state->Mod_Type == MXL_ATSC) /* ATSC Mode */ {
+ state->AGC_Mode = 1; /* Single AGC Mode */
+
+ /* Enable RSSI */
+ status += MXL_ControlWrite(fe, SEQ_EXTSYNTHCALIF, 1);
+ status += MXL_ControlWrite(fe, SEQ_EXTDCCAL, 1);
+ status += MXL_ControlWrite(fe, AGC_EN_RSSI, 1);
+ status += MXL_ControlWrite(fe, RFA_ENCLKRFAGC, 1);
+
+ /* RSSI reference point */
+ status += MXL_ControlWrite(fe, RFA_RSSI_REF, 2);
+ status += MXL_ControlWrite(fe, RFA_RSSI_REFH, 4);
+ status += MXL_ControlWrite(fe, RFA_RSSI_REFL, 1);
+
+ /* TOP point */
+ status += MXL_ControlWrite(fe, RFA_FLR, 2);
+ status += MXL_ControlWrite(fe, RFA_CEIL, 13);
+ status += MXL_ControlWrite(fe, BB_INITSTATE_DLPF_TUNE, 1);
+ /* Low Zero */
+ status += MXL_ControlWrite(fe, RFSYN_CHP_GAIN, 5);
+
+ if (state->IF_OUT <= 6280000UL) /* Low IF */
+ status += MXL_ControlWrite(fe, BB_IQSWAP, 0);
+ else /* High IF */
+ status += MXL_ControlWrite(fe, BB_IQSWAP, 1);
+ }
+ if (state->Mod_Type == MXL_QAM) /* QAM Mode */ {
+ state->Mode = MXL_DIGITAL_MODE;
+
+ /* state->AGC_Mode = 1; */ /* Single AGC Mode */
+
+ /* Disable RSSI */ /* change here for v2.6.5 */
+ status += MXL_ControlWrite(fe, SEQ_EXTSYNTHCALIF, 1);
+ status += MXL_ControlWrite(fe, SEQ_EXTDCCAL, 1);
+ status += MXL_ControlWrite(fe, AGC_EN_RSSI, 0);
+ status += MXL_ControlWrite(fe, RFA_ENCLKRFAGC, 1);
+
+ /* RSSI reference point */
+ status += MXL_ControlWrite(fe, RFA_RSSI_REFH, 5);
+ status += MXL_ControlWrite(fe, RFA_RSSI_REF, 3);
+ status += MXL_ControlWrite(fe, RFA_RSSI_REFL, 2);
+ /* change here for v2.6.5 */
+ status += MXL_ControlWrite(fe, RFSYN_CHP_GAIN, 3);
+
+ if (state->IF_OUT <= 6280000UL) /* Low IF */
+ status += MXL_ControlWrite(fe, BB_IQSWAP, 0);
+ else /* High IF */
+ status += MXL_ControlWrite(fe, BB_IQSWAP, 1);
+ status += MXL_ControlWrite(fe, RFSYN_CHP_GAIN, 2);
+
+ }
+ if (state->Mod_Type == MXL_ANALOG_CABLE) {
+ /* Analog Cable Mode */
+ /* state->Mode = MXL_DIGITAL_MODE; */
+
+ state->AGC_Mode = 1; /* Single AGC Mode */
+
+ /* Disable RSSI */
+ status += MXL_ControlWrite(fe, SEQ_EXTSYNTHCALIF, 1);
+ status += MXL_ControlWrite(fe, SEQ_EXTDCCAL, 1);
+ status += MXL_ControlWrite(fe, AGC_EN_RSSI, 0);
+ status += MXL_ControlWrite(fe, RFA_ENCLKRFAGC, 1);
+ /* change for 2.6.3 */
+ status += MXL_ControlWrite(fe, AGC_IF, 1);
+ status += MXL_ControlWrite(fe, AGC_RF, 15);
+ status += MXL_ControlWrite(fe, BB_IQSWAP, 1);
+ }
+
+ if (state->Mod_Type == MXL_ANALOG_OTA) {
+ /* Analog OTA Terrestrial mode add for 2.6.7 */
+ /* state->Mode = MXL_ANALOG_MODE; */
+
+ /* Enable RSSI */
+ status += MXL_ControlWrite(fe, SEQ_EXTSYNTHCALIF, 1);
+ status += MXL_ControlWrite(fe, SEQ_EXTDCCAL, 1);
+ status += MXL_ControlWrite(fe, AGC_EN_RSSI, 1);
+ status += MXL_ControlWrite(fe, RFA_ENCLKRFAGC, 1);
+
+ /* RSSI reference point */
+ status += MXL_ControlWrite(fe, RFA_RSSI_REFH, 5);
+ status += MXL_ControlWrite(fe, RFA_RSSI_REF, 3);
+ status += MXL_ControlWrite(fe, RFA_RSSI_REFL, 2);
+ status += MXL_ControlWrite(fe, RFSYN_CHP_GAIN, 3);
+ status += MXL_ControlWrite(fe, BB_IQSWAP, 1);
+ }
+
+ /* RSSI disable */
+ if (state->EN_RSSI == 0) {
+ status += MXL_ControlWrite(fe, SEQ_EXTSYNTHCALIF, 1);
+ status += MXL_ControlWrite(fe, SEQ_EXTDCCAL, 1);
+ status += MXL_ControlWrite(fe, AGC_EN_RSSI, 0);
+ status += MXL_ControlWrite(fe, RFA_ENCLKRFAGC, 1);
+ }
+
+ return status;
+}
+
+static u16 MXL_IFSynthInit(struct dvb_frontend *fe)
+{
+ struct mxl5005s_state *state = fe->tuner_priv;
+ u16 status = 0 ;
+ u32 Fref = 0 ;
+ u32 Kdbl, intModVal ;
+ u32 fracModVal ;
+ Kdbl = 2 ;
+
+ if (state->Fxtal >= 12000000UL && state->Fxtal <= 16000000UL)
+ Kdbl = 2 ;
+ if (state->Fxtal > 16000000UL && state->Fxtal <= 32000000UL)
+ Kdbl = 1 ;
+
+ /* IF Synthesizer Control */
+ if (state->Mode == 0 && state->IF_Mode == 1) /* Analog Low IF mode */ {
+ if (state->IF_LO == 41000000UL) {
+ status += MXL_ControlWrite(fe, IF_DIVVAL, 0x08);
+ status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x0C);
+ Fref = 328000000UL ;
+ }
+ if (state->IF_LO == 47000000UL) {
+ status += MXL_ControlWrite(fe, IF_DIVVAL, 0x08);
+ status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x08);
+ Fref = 376000000UL ;
+ }
+ if (state->IF_LO == 54000000UL) {
+ status += MXL_ControlWrite(fe, IF_DIVVAL, 0x10);
+ status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x0C);
+ Fref = 324000000UL ;
+ }
+ if (state->IF_LO == 60000000UL) {
+ status += MXL_ControlWrite(fe, IF_DIVVAL, 0x10);
+ status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x08);
+ Fref = 360000000UL ;
+ }
+ if (state->IF_LO == 39250000UL) {
+ status += MXL_ControlWrite(fe, IF_DIVVAL, 0x08);
+ status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x0C);
+ Fref = 314000000UL ;
+ }
+ if (state->IF_LO == 39650000UL) {
+ status += MXL_ControlWrite(fe, IF_DIVVAL, 0x08);
+ status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x0C);
+ Fref = 317200000UL ;
+ }
+ if (state->IF_LO == 40150000UL) {
+ status += MXL_ControlWrite(fe, IF_DIVVAL, 0x08);
+ status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x0C);
+ Fref = 321200000UL ;
+ }
+ if (state->IF_LO == 40650000UL) {
+ status += MXL_ControlWrite(fe, IF_DIVVAL, 0x08);
+ status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x0C);
+ Fref = 325200000UL ;
+ }
+ }
+
+ if (state->Mode || (state->Mode == 0 && state->IF_Mode == 0)) {
+ if (state->IF_LO == 57000000UL) {
+ status += MXL_ControlWrite(fe, IF_DIVVAL, 0x10);
+ status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x08);
+ Fref = 342000000UL ;
+ }
+ if (state->IF_LO == 44000000UL) {
+ status += MXL_ControlWrite(fe, IF_DIVVAL, 0x08);
+ status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x08);
+ Fref = 352000000UL ;
+ }
+ if (state->IF_LO == 43750000UL) {
+ status += MXL_ControlWrite(fe, IF_DIVVAL, 0x08);
+ status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x08);
+ Fref = 350000000UL ;
+ }
+ if (state->IF_LO == 36650000UL) {
+ status += MXL_ControlWrite(fe, IF_DIVVAL, 0x04);
+ status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x08);
+ Fref = 366500000UL ;
+ }
+ if (state->IF_LO == 36150000UL) {
+ status += MXL_ControlWrite(fe, IF_DIVVAL, 0x04);
+ status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x08);
+ Fref = 361500000UL ;
+ }
+ if (state->IF_LO == 36000000UL) {
+ status += MXL_ControlWrite(fe, IF_DIVVAL, 0x04);
+ status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x08);
+ Fref = 360000000UL ;
+ }
+ if (state->IF_LO == 35250000UL) {
+ status += MXL_ControlWrite(fe, IF_DIVVAL, 0x04);
+ status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x08);
+ Fref = 352500000UL ;
+ }
+ if (state->IF_LO == 34750000UL) {
+ status += MXL_ControlWrite(fe, IF_DIVVAL, 0x04);
+ status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x08);
+ Fref = 347500000UL ;
+ }
+ if (state->IF_LO == 6280000UL) {
+ status += MXL_ControlWrite(fe, IF_DIVVAL, 0x07);
+ status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x08);
+ Fref = 376800000UL ;
+ }
+ if (state->IF_LO == 5000000UL) {
+ status += MXL_ControlWrite(fe, IF_DIVVAL, 0x09);
+ status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x08);
+ Fref = 360000000UL ;
+ }
+ if (state->IF_LO == 4500000UL) {
+ status += MXL_ControlWrite(fe, IF_DIVVAL, 0x06);
+ status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x08);
+ Fref = 360000000UL ;
+ }
+ if (state->IF_LO == 4570000UL) {
+ status += MXL_ControlWrite(fe, IF_DIVVAL, 0x06);
+ status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x08);
+ Fref = 365600000UL ;
+ }
+ if (state->IF_LO == 4000000UL) {
+ status += MXL_ControlWrite(fe, IF_DIVVAL, 0x05);
+ status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x08);
+ Fref = 360000000UL ;
+ }
+ if (state->IF_LO == 57400000UL) {
+ status += MXL_ControlWrite(fe, IF_DIVVAL, 0x10);
+ status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x08);
+ Fref = 344400000UL ;
+ }
+ if (state->IF_LO == 44400000UL) {
+ status += MXL_ControlWrite(fe, IF_DIVVAL, 0x08);
+ status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x08);
+ Fref = 355200000UL ;
+ }
+ if (state->IF_LO == 44150000UL) {
+ status += MXL_ControlWrite(fe, IF_DIVVAL, 0x08);
+ status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x08);
+ Fref = 353200000UL ;
+ }
+ if (state->IF_LO == 37050000UL) {
+ status += MXL_ControlWrite(fe, IF_DIVVAL, 0x04);
+ status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x08);
+ Fref = 370500000UL ;
+ }
+ if (state->IF_LO == 36550000UL) {
+ status += MXL_ControlWrite(fe, IF_DIVVAL, 0x04);
+ status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x08);
+ Fref = 365500000UL ;
+ }
+ if (state->IF_LO == 36125000UL) {
+ status += MXL_ControlWrite(fe, IF_DIVVAL, 0x04);
+ status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x08);
+ Fref = 361250000UL ;
+ }
+ if (state->IF_LO == 6000000UL) {
+ status += MXL_ControlWrite(fe, IF_DIVVAL, 0x07);
+ status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x08);
+ Fref = 360000000UL ;
+ }
+ if (state->IF_LO == 5400000UL) {
+ status += MXL_ControlWrite(fe, IF_DIVVAL, 0x07);
+ status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x0C);
+ Fref = 324000000UL ;
+ }
+ if (state->IF_LO == 5380000UL) {
+ status += MXL_ControlWrite(fe, IF_DIVVAL, 0x07);
+ status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x0C);
+ Fref = 322800000UL ;
+ }
+ if (state->IF_LO == 5200000UL) {
+ status += MXL_ControlWrite(fe, IF_DIVVAL, 0x09);
+ status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x08);
+ Fref = 374400000UL ;
+ }
+ if (state->IF_LO == 4900000UL) {
+ status += MXL_ControlWrite(fe, IF_DIVVAL, 0x09);
+ status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x08);
+ Fref = 352800000UL ;
+ }
+ if (state->IF_LO == 4400000UL) {
+ status += MXL_ControlWrite(fe, IF_DIVVAL, 0x06);
+ status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x08);
+ Fref = 352000000UL ;
+ }
+ if (state->IF_LO == 4063000UL) /* add for 2.6.8 */ {
+ status += MXL_ControlWrite(fe, IF_DIVVAL, 0x05);
+ status += MXL_ControlWrite(fe, IF_VCO_BIAS, 0x08);
+ Fref = 365670000UL ;
+ }
+ }
+ /* CHCAL_INT_MOD_IF */
+ /* CHCAL_FRAC_MOD_IF */
+ intModVal = Fref / (state->Fxtal * Kdbl/2);
+ status += MXL_ControlWrite(fe, CHCAL_INT_MOD_IF, intModVal);
+
+ fracModVal = (2<<15)*(Fref/1000 - (state->Fxtal/1000 * Kdbl/2) *
+ intModVal);
+
+ fracModVal = fracModVal / ((state->Fxtal * Kdbl/2)/1000);
+ status += MXL_ControlWrite(fe, CHCAL_FRAC_MOD_IF, fracModVal);
+
+ return status ;
+}
+
+static u32 MXL_GetXtalInt(u32 Xtal_Freq)
+{
+ if ((Xtal_Freq % 1000000) == 0)
+ return (Xtal_Freq / 10000);
+ else
+ return (((Xtal_Freq / 1000000) + 1)*100);
+}
+
+static u16 MXL_TuneRF(struct dvb_frontend *fe, u32 RF_Freq)
+{
+ struct mxl5005s_state *state = fe->tuner_priv;
+ u16 status = 0;
+ u32 divider_val, E3, E4, E5, E5A;
+ u32 Fmax, Fmin, FmaxBin, FminBin;
+ u32 Kdbl_RF = 2;
+ u32 tg_divval;
+ u32 tg_lo;
+ u32 Xtal_Int;
+
+ u32 Fref_TG;
+ u32 Fvco;
+
+ Xtal_Int = MXL_GetXtalInt(state->Fxtal);
+
+ state->RF_IN = RF_Freq;
+
+ MXL_SynthRFTGLO_Calc(fe);
+
+ if (state->Fxtal >= 12000000UL && state->Fxtal <= 22000000UL)
+ Kdbl_RF = 2;
+ if (state->Fxtal > 22000000 && state->Fxtal <= 32000000)
+ Kdbl_RF = 1;
+
+ /* Downconverter Controls
+ * Look-Up Table Implementation for:
+ * DN_POLY
+ * DN_RFGAIN
+ * DN_CAP_RFLPF
+ * DN_EN_VHFUHFBAR
+ * DN_GAIN_ADJUST
+ * Change the boundary reference from RF_IN to RF_LO
+ */
+ if (state->RF_LO < 40000000UL)
+ return -1;
+
+ if (state->RF_LO >= 40000000UL && state->RF_LO <= 75000000UL) {
+ status += MXL_ControlWrite(fe, DN_POLY, 2);
+ status += MXL_ControlWrite(fe, DN_RFGAIN, 3);
+ status += MXL_ControlWrite(fe, DN_CAP_RFLPF, 423);
+ status += MXL_ControlWrite(fe, DN_EN_VHFUHFBAR, 1);
+ status += MXL_ControlWrite(fe, DN_GAIN_ADJUST, 1);
+ }
+ if (state->RF_LO > 75000000UL && state->RF_LO <= 100000000UL) {
+ status += MXL_ControlWrite(fe, DN_POLY, 3);
+ status += MXL_ControlWrite(fe, DN_RFGAIN, 3);
+ status += MXL_ControlWrite(fe, DN_CAP_RFLPF, 222);
+ status += MXL_ControlWrite(fe, DN_EN_VHFUHFBAR, 1);
+ status += MXL_ControlWrite(fe, DN_GAIN_ADJUST, 1);
+ }
+ if (state->RF_LO > 100000000UL && state->RF_LO <= 150000000UL) {
+ status += MXL_ControlWrite(fe, DN_POLY, 3);
+ status += MXL_ControlWrite(fe, DN_RFGAIN, 3);
+ status += MXL_ControlWrite(fe, DN_CAP_RFLPF, 147);
+ status += MXL_ControlWrite(fe, DN_EN_VHFUHFBAR, 1);
+ status += MXL_ControlWrite(fe, DN_GAIN_ADJUST, 2);
+ }
+ if (state->RF_LO > 150000000UL && state->RF_LO <= 200000000UL) {
+ status += MXL_ControlWrite(fe, DN_POLY, 3);
+ status += MXL_ControlWrite(fe, DN_RFGAIN, 3);
+ status += MXL_ControlWrite(fe, DN_CAP_RFLPF, 9);
+ status += MXL_ControlWrite(fe, DN_EN_VHFUHFBAR, 1);
+ status += MXL_ControlWrite(fe, DN_GAIN_ADJUST, 2);
+ }
+ if (state->RF_LO > 200000000UL && state->RF_LO <= 300000000UL) {
+ status += MXL_ControlWrite(fe, DN_POLY, 3);
+ status += MXL_ControlWrite(fe, DN_RFGAIN, 3);
+ status += MXL_ControlWrite(fe, DN_CAP_RFLPF, 0);
+ status += MXL_ControlWrite(fe, DN_EN_VHFUHFBAR, 1);
+ status += MXL_ControlWrite(fe, DN_GAIN_ADJUST, 3);
+ }
+ if (state->RF_LO > 300000000UL && state->RF_LO <= 650000000UL) {
+ status += MXL_ControlWrite(fe, DN_POLY, 3);
+ status += MXL_ControlWrite(fe, DN_RFGAIN, 1);
+ status += MXL_ControlWrite(fe, DN_CAP_RFLPF, 0);
+ status += MXL_ControlWrite(fe, DN_EN_VHFUHFBAR, 0);
+ status += MXL_ControlWrite(fe, DN_GAIN_ADJUST, 3);
+ }
+ if (state->RF_LO > 650000000UL && state->RF_LO <= 900000000UL) {
+ status += MXL_ControlWrite(fe, DN_POLY, 3);
+ status += MXL_ControlWrite(fe, DN_RFGAIN, 2);
+ status += MXL_ControlWrite(fe, DN_CAP_RFLPF, 0);
+ status += MXL_ControlWrite(fe, DN_EN_VHFUHFBAR, 0);
+ status += MXL_ControlWrite(fe, DN_GAIN_ADJUST, 3);
+ }
+ if (state->RF_LO > 900000000UL)
+ return -1;
+
+ /* DN_IQTNBUF_AMP */
+ /* DN_IQTNGNBFBIAS_BST */
+ if (state->RF_LO >= 40000000UL && state->RF_LO <= 75000000UL) {
+ status += MXL_ControlWrite(fe, DN_IQTNBUF_AMP, 1);
+ status += MXL_ControlWrite(fe, DN_IQTNGNBFBIAS_BST, 0);
+ }
+ if (state->RF_LO > 75000000UL && state->RF_LO <= 100000000UL) {
+ status += MXL_ControlWrite(fe, DN_IQTNBUF_AMP, 1);
+ status += MXL_ControlWrite(fe, DN_IQTNGNBFBIAS_BST, 0);
+ }
+ if (state->RF_LO > 100000000UL && state->RF_LO <= 150000000UL) {
+ status += MXL_ControlWrite(fe, DN_IQTNBUF_AMP, 1);
+ status += MXL_ControlWrite(fe, DN_IQTNGNBFBIAS_BST, 0);
+ }
+ if (state->RF_LO > 150000000UL && state->RF_LO <= 200000000UL) {
+ status += MXL_ControlWrite(fe, DN_IQTNBUF_AMP, 1);
+ status += MXL_ControlWrite(fe, DN_IQTNGNBFBIAS_BST, 0);
+ }
+ if (state->RF_LO > 200000000UL && state->RF_LO <= 300000000UL) {
+ status += MXL_ControlWrite(fe, DN_IQTNBUF_AMP, 1);
+ status += MXL_ControlWrite(fe, DN_IQTNGNBFBIAS_BST, 0);
+ }
+ if (state->RF_LO > 300000000UL && state->RF_LO <= 400000000UL) {
+ status += MXL_ControlWrite(fe, DN_IQTNBUF_AMP, 1);
+ status += MXL_ControlWrite(fe, DN_IQTNGNBFBIAS_BST, 0);
+ }
+ if (state->RF_LO > 400000000UL && state->RF_LO <= 450000000UL) {
+ status += MXL_ControlWrite(fe, DN_IQTNBUF_AMP, 1);
+ status += MXL_ControlWrite(fe, DN_IQTNGNBFBIAS_BST, 0);
+ }
+ if (state->RF_LO > 450000000UL && state->RF_LO <= 500000000UL) {
+ status += MXL_ControlWrite(fe, DN_IQTNBUF_AMP, 1);
+ status += MXL_ControlWrite(fe, DN_IQTNGNBFBIAS_BST, 0);
+ }
+ if (state->RF_LO > 500000000UL && state->RF_LO <= 550000000UL) {
+ status += MXL_ControlWrite(fe, DN_IQTNBUF_AMP, 1);
+ status += MXL_ControlWrite(fe, DN_IQTNGNBFBIAS_BST, 0);
+ }
+ if (state->RF_LO > 550000000UL && state->RF_LO <= 600000000UL) {
+ status += MXL_ControlWrite(fe, DN_IQTNBUF_AMP, 1);
+ status += MXL_ControlWrite(fe, DN_IQTNGNBFBIAS_BST, 0);
+ }
+ if (state->RF_LO > 600000000UL && state->RF_LO <= 650000000UL) {
+ status += MXL_ControlWrite(fe, DN_IQTNBUF_AMP, 1);
+ status += MXL_ControlWrite(fe, DN_IQTNGNBFBIAS_BST, 0);
+ }
+ if (state->RF_LO > 650000000UL && state->RF_LO <= 700000000UL) {
+ status += MXL_ControlWrite(fe, DN_IQTNBUF_AMP, 1);
+ status += MXL_ControlWrite(fe, DN_IQTNGNBFBIAS_BST, 0);
+ }
+ if (state->RF_LO > 700000000UL && state->RF_LO <= 750000000UL) {
+ status += MXL_ControlWrite(fe, DN_IQTNBUF_AMP, 1);
+ status += MXL_ControlWrite(fe, DN_IQTNGNBFBIAS_BST, 0);
+ }
+ if (state->RF_LO > 750000000UL && state->RF_LO <= 800000000UL) {
+ status += MXL_ControlWrite(fe, DN_IQTNBUF_AMP, 1);
+ status += MXL_ControlWrite(fe, DN_IQTNGNBFBIAS_BST, 0);
+ }
+ if (state->RF_LO > 800000000UL && state->RF_LO <= 850000000UL) {
+ status += MXL_ControlWrite(fe, DN_IQTNBUF_AMP, 10);
+ status += MXL_ControlWrite(fe, DN_IQTNGNBFBIAS_BST, 1);
+ }
+ if (state->RF_LO > 850000000UL && state->RF_LO <= 900000000UL) {
+ status += MXL_ControlWrite(fe, DN_IQTNBUF_AMP, 10);
+ status += MXL_ControlWrite(fe, DN_IQTNGNBFBIAS_BST, 1);
+ }
+
+ /*
+ * Set RF Synth and LO Path Control
+ *
+ * Look-Up table implementation for:
+ * RFSYN_EN_OUTMUX
+ * RFSYN_SEL_VCO_OUT
+ * RFSYN_SEL_VCO_HI
+ * RFSYN_SEL_DIVM
+ * RFSYN_RF_DIV_BIAS
+ * DN_SEL_FREQ
+ *
+ * Set divider_val, Fmax, Fmix to use in Equations
+ */
+ FminBin = 28000000UL ;
+ FmaxBin = 42500000UL ;
+ if (state->RF_LO >= 40000000UL && state->RF_LO <= FmaxBin) {
+ status += MXL_ControlWrite(fe, RFSYN_EN_OUTMUX, 1);
+ status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_OUT, 0);
+ status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_HI, 0);
+ status += MXL_ControlWrite(fe, RFSYN_SEL_DIVM, 0);
+ status += MXL_ControlWrite(fe, RFSYN_RF_DIV_BIAS, 1);
+ status += MXL_ControlWrite(fe, DN_SEL_FREQ, 1);
+ divider_val = 64 ;
+ Fmax = FmaxBin ;
+ Fmin = FminBin ;
+ }
+ FminBin = 42500000UL ;
+ FmaxBin = 56000000UL ;
+ if (state->RF_LO > FminBin && state->RF_LO <= FmaxBin) {
+ status += MXL_ControlWrite(fe, RFSYN_EN_OUTMUX, 1);
+ status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_OUT, 0);
+ status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_HI, 1);
+ status += MXL_ControlWrite(fe, RFSYN_SEL_DIVM, 0);
+ status += MXL_ControlWrite(fe, RFSYN_RF_DIV_BIAS, 1);
+ status += MXL_ControlWrite(fe, DN_SEL_FREQ, 1);
+ divider_val = 64 ;
+ Fmax = FmaxBin ;
+ Fmin = FminBin ;
+ }
+ FminBin = 56000000UL ;
+ FmaxBin = 85000000UL ;
+ if (state->RF_LO > FminBin && state->RF_LO <= FmaxBin) {
+ status += MXL_ControlWrite(fe, RFSYN_EN_OUTMUX, 0);
+ status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_OUT, 1);
+ status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_HI, 0);
+ status += MXL_ControlWrite(fe, RFSYN_SEL_DIVM, 0);
+ status += MXL_ControlWrite(fe, RFSYN_RF_DIV_BIAS, 1);
+ status += MXL_ControlWrite(fe, DN_SEL_FREQ, 1);
+ divider_val = 32 ;
+ Fmax = FmaxBin ;
+ Fmin = FminBin ;
+ }
+ FminBin = 85000000UL ;
+ FmaxBin = 112000000UL ;
+ if (state->RF_LO > FminBin && state->RF_LO <= FmaxBin) {
+ status += MXL_ControlWrite(fe, RFSYN_EN_OUTMUX, 0);
+ status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_OUT, 1);
+ status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_HI, 1);
+ status += MXL_ControlWrite(fe, RFSYN_SEL_DIVM, 0);
+ status += MXL_ControlWrite(fe, RFSYN_RF_DIV_BIAS, 1);
+ status += MXL_ControlWrite(fe, DN_SEL_FREQ, 1);
+ divider_val = 32 ;
+ Fmax = FmaxBin ;
+ Fmin = FminBin ;
+ }
+ FminBin = 112000000UL ;
+ FmaxBin = 170000000UL ;
+ if (state->RF_LO > FminBin && state->RF_LO <= FmaxBin) {
+ status += MXL_ControlWrite(fe, RFSYN_EN_OUTMUX, 0);
+ status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_OUT, 1);
+ status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_HI, 0);
+ status += MXL_ControlWrite(fe, RFSYN_SEL_DIVM, 0);
+ status += MXL_ControlWrite(fe, RFSYN_RF_DIV_BIAS, 1);
+ status += MXL_ControlWrite(fe, DN_SEL_FREQ, 2);
+ divider_val = 16 ;
+ Fmax = FmaxBin ;
+ Fmin = FminBin ;
+ }
+ FminBin = 170000000UL ;
+ FmaxBin = 225000000UL ;
+ if (state->RF_LO > FminBin && state->RF_LO <= FmaxBin) {
+ status += MXL_ControlWrite(fe, RFSYN_EN_OUTMUX, 0);
+ status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_OUT, 1);
+ status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_HI, 1);
+ status += MXL_ControlWrite(fe, RFSYN_SEL_DIVM, 0);
+ status += MXL_ControlWrite(fe, RFSYN_RF_DIV_BIAS, 1);
+ status += MXL_ControlWrite(fe, DN_SEL_FREQ, 2);
+ divider_val = 16 ;
+ Fmax = FmaxBin ;
+ Fmin = FminBin ;
+ }
+ FminBin = 225000000UL ;
+ FmaxBin = 300000000UL ;
+ if (state->RF_LO > FminBin && state->RF_LO <= FmaxBin) {
+ status += MXL_ControlWrite(fe, RFSYN_EN_OUTMUX, 0);
+ status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_OUT, 1);
+ status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_HI, 0);
+ status += MXL_ControlWrite(fe, RFSYN_SEL_DIVM, 0);
+ status += MXL_ControlWrite(fe, RFSYN_RF_DIV_BIAS, 1);
+ status += MXL_ControlWrite(fe, DN_SEL_FREQ, 4);
+ divider_val = 8 ;
+ Fmax = 340000000UL ;
+ Fmin = FminBin ;
+ }
+ FminBin = 300000000UL ;
+ FmaxBin = 340000000UL ;
+ if (state->RF_LO > FminBin && state->RF_LO <= FmaxBin) {
+ status += MXL_ControlWrite(fe, RFSYN_EN_OUTMUX, 1);
+ status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_OUT, 0);
+ status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_HI, 0);
+ status += MXL_ControlWrite(fe, RFSYN_SEL_DIVM, 0);
+ status += MXL_ControlWrite(fe, RFSYN_RF_DIV_BIAS, 1);
+ status += MXL_ControlWrite(fe, DN_SEL_FREQ, 0);
+ divider_val = 8 ;
+ Fmax = FmaxBin ;
+ Fmin = 225000000UL ;
+ }
+ FminBin = 340000000UL ;
+ FmaxBin = 450000000UL ;
+ if (state->RF_LO > FminBin && state->RF_LO <= FmaxBin) {
+ status += MXL_ControlWrite(fe, RFSYN_EN_OUTMUX, 1);
+ status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_OUT, 0);
+ status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_HI, 1);
+ status += MXL_ControlWrite(fe, RFSYN_SEL_DIVM, 0);
+ status += MXL_ControlWrite(fe, RFSYN_RF_DIV_BIAS, 2);
+ status += MXL_ControlWrite(fe, DN_SEL_FREQ, 0);
+ divider_val = 8 ;
+ Fmax = FmaxBin ;
+ Fmin = FminBin ;
+ }
+ FminBin = 450000000UL ;
+ FmaxBin = 680000000UL ;
+ if (state->RF_LO > FminBin && state->RF_LO <= FmaxBin) {
+ status += MXL_ControlWrite(fe, RFSYN_EN_OUTMUX, 0);
+ status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_OUT, 1);
+ status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_HI, 0);
+ status += MXL_ControlWrite(fe, RFSYN_SEL_DIVM, 1);
+ status += MXL_ControlWrite(fe, RFSYN_RF_DIV_BIAS, 1);
+ status += MXL_ControlWrite(fe, DN_SEL_FREQ, 0);
+ divider_val = 4 ;
+ Fmax = FmaxBin ;
+ Fmin = FminBin ;
+ }
+ FminBin = 680000000UL ;
+ FmaxBin = 900000000UL ;
+ if (state->RF_LO > FminBin && state->RF_LO <= FmaxBin) {
+ status += MXL_ControlWrite(fe, RFSYN_EN_OUTMUX, 0);
+ status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_OUT, 1);
+ status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_HI, 1);
+ status += MXL_ControlWrite(fe, RFSYN_SEL_DIVM, 1);
+ status += MXL_ControlWrite(fe, RFSYN_RF_DIV_BIAS, 1);
+ status += MXL_ControlWrite(fe, DN_SEL_FREQ, 0);
+ divider_val = 4 ;
+ Fmax = FmaxBin ;
+ Fmin = FminBin ;
+ }
+
+ /* CHCAL_INT_MOD_RF
+ * CHCAL_FRAC_MOD_RF
+ * RFSYN_LPF_R
+ * CHCAL_EN_INT_RF
+ */
+ /* Equation E3 RFSYN_VCO_BIAS */
+ E3 = (((Fmax-state->RF_LO)/1000)*32)/((Fmax-Fmin)/1000) + 8 ;
+ status += MXL_ControlWrite(fe, RFSYN_VCO_BIAS, E3);
+
+ /* Equation E4 CHCAL_INT_MOD_RF */
+ E4 = (state->RF_LO*divider_val/1000)/(2*state->Fxtal*Kdbl_RF/1000);
+ MXL_ControlWrite(fe, CHCAL_INT_MOD_RF, E4);
+
+ /* Equation E5 CHCAL_FRAC_MOD_RF CHCAL_EN_INT_RF */
+ E5 = ((2<<17)*(state->RF_LO/10000*divider_val -
+ (E4*(2*state->Fxtal*Kdbl_RF)/10000))) /
+ (2*state->Fxtal*Kdbl_RF/10000);
+
+ status += MXL_ControlWrite(fe, CHCAL_FRAC_MOD_RF, E5);
+
+ /* Equation E5A RFSYN_LPF_R */
+ E5A = (((Fmax - state->RF_LO)/1000)*4/((Fmax-Fmin)/1000)) + 1 ;
+ status += MXL_ControlWrite(fe, RFSYN_LPF_R, E5A);
+
+ /* Euqation E5B CHCAL_EN_INIT_RF */
+ status += MXL_ControlWrite(fe, CHCAL_EN_INT_RF, ((E5 == 0) ? 1 : 0));
+ /*if (E5 == 0)
+ * status += MXL_ControlWrite(fe, CHCAL_EN_INT_RF, 1);
+ *else
+ * status += MXL_ControlWrite(fe, CHCAL_FRAC_MOD_RF, E5);
+ */
+
+ /*
+ * Set TG Synth
+ *
+ * Look-Up table implementation for:
+ * TG_LO_DIVVAL
+ * TG_LO_SELVAL
+ *
+ * Set divider_val, Fmax, Fmix to use in Equations
+ */
+ if (state->TG_LO < 33000000UL)
+ return -1;
+
+ FminBin = 33000000UL ;
+ FmaxBin = 50000000UL ;
+ if (state->TG_LO >= FminBin && state->TG_LO <= FmaxBin) {
+ status += MXL_ControlWrite(fe, TG_LO_DIVVAL, 0x6);
+ status += MXL_ControlWrite(fe, TG_LO_SELVAL, 0x0);
+ divider_val = 36 ;
+ Fmax = FmaxBin ;
+ Fmin = FminBin ;
+ }
+ FminBin = 50000000UL ;
+ FmaxBin = 67000000UL ;
+ if (state->TG_LO > FminBin && state->TG_LO <= FmaxBin) {
+ status += MXL_ControlWrite(fe, TG_LO_DIVVAL, 0x1);
+ status += MXL_ControlWrite(fe, TG_LO_SELVAL, 0x0);
+ divider_val = 24 ;
+ Fmax = FmaxBin ;
+ Fmin = FminBin ;
+ }
+ FminBin = 67000000UL ;
+ FmaxBin = 100000000UL ;
+ if (state->TG_LO > FminBin && state->TG_LO <= FmaxBin) {
+ status += MXL_ControlWrite(fe, TG_LO_DIVVAL, 0xC);
+ status += MXL_ControlWrite(fe, TG_LO_SELVAL, 0x2);
+ divider_val = 18 ;
+ Fmax = FmaxBin ;
+ Fmin = FminBin ;
+ }
+ FminBin = 100000000UL ;
+ FmaxBin = 150000000UL ;
+ if (state->TG_LO > FminBin && state->TG_LO <= FmaxBin) {
+ status += MXL_ControlWrite(fe, TG_LO_DIVVAL, 0x8);
+ status += MXL_ControlWrite(fe, TG_LO_SELVAL, 0x2);
+ divider_val = 12 ;
+ Fmax = FmaxBin ;
+ Fmin = FminBin ;
+ }
+ FminBin = 150000000UL ;
+ FmaxBin = 200000000UL ;
+ if (state->TG_LO > FminBin && state->TG_LO <= FmaxBin) {
+ status += MXL_ControlWrite(fe, TG_LO_DIVVAL, 0x0);
+ status += MXL_ControlWrite(fe, TG_LO_SELVAL, 0x2);
+ divider_val = 8 ;
+ Fmax = FmaxBin ;
+ Fmin = FminBin ;
+ }
+ FminBin = 200000000UL ;
+ FmaxBin = 300000000UL ;
+ if (state->TG_LO > FminBin && state->TG_LO <= FmaxBin) {
+ status += MXL_ControlWrite(fe, TG_LO_DIVVAL, 0x8);
+ status += MXL_ControlWrite(fe, TG_LO_SELVAL, 0x3);
+ divider_val = 6 ;
+ Fmax = FmaxBin ;
+ Fmin = FminBin ;
+ }
+ FminBin = 300000000UL ;
+ FmaxBin = 400000000UL ;
+ if (state->TG_LO > FminBin && state->TG_LO <= FmaxBin) {
+ status += MXL_ControlWrite(fe, TG_LO_DIVVAL, 0x0);
+ status += MXL_ControlWrite(fe, TG_LO_SELVAL, 0x3);
+ divider_val = 4 ;
+ Fmax = FmaxBin ;
+ Fmin = FminBin ;
+ }
+ FminBin = 400000000UL ;
+ FmaxBin = 600000000UL ;
+ if (state->TG_LO > FminBin && state->TG_LO <= FmaxBin) {
+ status += MXL_ControlWrite(fe, TG_LO_DIVVAL, 0x8);
+ status += MXL_ControlWrite(fe, TG_LO_SELVAL, 0x7);
+ divider_val = 3 ;
+ Fmax = FmaxBin ;
+ Fmin = FminBin ;
+ }
+ FminBin = 600000000UL ;
+ FmaxBin = 900000000UL ;
+ if (state->TG_LO > FminBin && state->TG_LO <= FmaxBin) {
+ status += MXL_ControlWrite(fe, TG_LO_DIVVAL, 0x0);
+ status += MXL_ControlWrite(fe, TG_LO_SELVAL, 0x7);
+ divider_val = 2 ;
+ Fmax = FmaxBin ;
+ Fmin = FminBin ;
+ }
+
+ /* TG_DIV_VAL */
+ tg_divval = (state->TG_LO*divider_val/100000) *
+ (MXL_Ceiling(state->Fxtal, 1000000) * 100) /
+ (state->Fxtal/1000);
+
+ status += MXL_ControlWrite(fe, TG_DIV_VAL, tg_divval);
+
+ if (state->TG_LO > 600000000UL)
+ status += MXL_ControlWrite(fe, TG_DIV_VAL, tg_divval + 1);
+
+ Fmax = 1800000000UL ;
+ Fmin = 1200000000UL ;
+
+ /* prevent overflow of 32 bit unsigned integer, use
+ * following equation. Edit for v2.6.4
+ */
+ /* Fref_TF = Fref_TG * 1000 */
+ Fref_TG = (state->Fxtal/1000) / MXL_Ceiling(state->Fxtal, 1000000);
+
+ /* Fvco = Fvco/10 */
+ Fvco = (state->TG_LO/10000) * divider_val * Fref_TG;
+
+ tg_lo = (((Fmax/10 - Fvco)/100)*32) / ((Fmax-Fmin)/1000)+8;
+
+ /* below equation is same as above but much harder to debug.
+ * tg_lo = ( ((Fmax/10000 * Xtal_Int)/100) -
+ * ((state->TG_LO/10000)*divider_val *
+ * (state->Fxtal/10000)/100) )*32/((Fmax-Fmin)/10000 *
+ * Xtal_Int/100) + 8;
+ */
+
+ status += MXL_ControlWrite(fe, TG_VCO_BIAS , tg_lo);
+
+ /* add for 2.6.5 Special setting for QAM */
+ if (state->Mod_Type == MXL_QAM) {
+ if (state->RF_IN < 680000000)
+ status += MXL_ControlWrite(fe, RFSYN_CHP_GAIN, 3);
+ else
+ status += MXL_ControlWrite(fe, RFSYN_CHP_GAIN, 2);
+ }
+
+ /* Off Chip Tracking Filter Control */
+ if (state->TF_Type == MXL_TF_OFF) {
+ /* Tracking Filter Off State; turn off all the banks */
+ status += MXL_ControlWrite(fe, DAC_A_ENABLE, 0);
+ status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0);
+ status += MXL_SetGPIO(fe, 3, 1); /* Bank1 Off */
+ status += MXL_SetGPIO(fe, 1, 1); /* Bank2 Off */
+ status += MXL_SetGPIO(fe, 4, 1); /* Bank3 Off */
+ }
+
+ if (state->TF_Type == MXL_TF_C) /* Tracking Filter type C */ {
+ status += MXL_ControlWrite(fe, DAC_B_ENABLE, 1);
+ status += MXL_ControlWrite(fe, DAC_DIN_A, 0);
+
+ if (state->RF_IN >= 43000000 && state->RF_IN < 150000000) {
+ status += MXL_ControlWrite(fe, DAC_A_ENABLE, 0);
+ status += MXL_ControlWrite(fe, DAC_DIN_B, 0);
+ status += MXL_SetGPIO(fe, 3, 0);
+ status += MXL_SetGPIO(fe, 1, 1);
+ status += MXL_SetGPIO(fe, 4, 1);
+ }
+ if (state->RF_IN >= 150000000 && state->RF_IN < 280000000) {
+ status += MXL_ControlWrite(fe, DAC_A_ENABLE, 0);
+ status += MXL_ControlWrite(fe, DAC_DIN_B, 0);
+ status += MXL_SetGPIO(fe, 3, 1);
+ status += MXL_SetGPIO(fe, 1, 0);
+ status += MXL_SetGPIO(fe, 4, 1);
+ }
+ if (state->RF_IN >= 280000000 && state->RF_IN < 360000000) {
+ status += MXL_ControlWrite(fe, DAC_A_ENABLE, 0);
+ status += MXL_ControlWrite(fe, DAC_DIN_B, 0);
+ status += MXL_SetGPIO(fe, 3, 1);
+ status += MXL_SetGPIO(fe, 1, 0);
+ status += MXL_SetGPIO(fe, 4, 0);
+ }
+ if (state->RF_IN >= 360000000 && state->RF_IN < 560000000) {
+ status += MXL_ControlWrite(fe, DAC_A_ENABLE, 0);
+ status += MXL_ControlWrite(fe, DAC_DIN_B, 0);
+ status += MXL_SetGPIO(fe, 3, 1);
+ status += MXL_SetGPIO(fe, 1, 1);
+ status += MXL_SetGPIO(fe, 4, 0);
+ }
+ if (state->RF_IN >= 560000000 && state->RF_IN < 580000000) {
+ status += MXL_ControlWrite(fe, DAC_A_ENABLE, 1);
+ status += MXL_ControlWrite(fe, DAC_DIN_B, 29);
+ status += MXL_SetGPIO(fe, 3, 1);
+ status += MXL_SetGPIO(fe, 1, 1);
+ status += MXL_SetGPIO(fe, 4, 0);
+ }
+ if (state->RF_IN >= 580000000 && state->RF_IN < 630000000) {
+ status += MXL_ControlWrite(fe, DAC_A_ENABLE, 1);
+ status += MXL_ControlWrite(fe, DAC_DIN_B, 0);
+ status += MXL_SetGPIO(fe, 3, 1);
+ status += MXL_SetGPIO(fe, 1, 1);
+ status += MXL_SetGPIO(fe, 4, 0);
+ }
+ if (state->RF_IN >= 630000000 && state->RF_IN < 700000000) {
+ status += MXL_ControlWrite(fe, DAC_A_ENABLE, 1);
+ status += MXL_ControlWrite(fe, DAC_DIN_B, 16);
+ status += MXL_SetGPIO(fe, 3, 1);
+ status += MXL_SetGPIO(fe, 1, 1);
+ status += MXL_SetGPIO(fe, 4, 1);
+ }
+ if (state->RF_IN >= 700000000 && state->RF_IN < 760000000) {
+ status += MXL_ControlWrite(fe, DAC_A_ENABLE, 1);
+ status += MXL_ControlWrite(fe, DAC_DIN_B, 7);
+ status += MXL_SetGPIO(fe, 3, 1);
+ status += MXL_SetGPIO(fe, 1, 1);
+ status += MXL_SetGPIO(fe, 4, 1);
+ }
+ if (state->RF_IN >= 760000000 && state->RF_IN <= 900000000) {
+ status += MXL_ControlWrite(fe, DAC_A_ENABLE, 1);
+ status += MXL_ControlWrite(fe, DAC_DIN_B, 0);
+ status += MXL_SetGPIO(fe, 3, 1);
+ status += MXL_SetGPIO(fe, 1, 1);
+ status += MXL_SetGPIO(fe, 4, 1);
+ }
+ }
+
+ if (state->TF_Type == MXL_TF_C_H) {
+
+ /* Tracking Filter type C-H for Hauppauge only */
+ status += MXL_ControlWrite(fe, DAC_DIN_A, 0);
+
+ if (state->RF_IN >= 43000000 && state->RF_IN < 150000000) {
+ status += MXL_ControlWrite(fe, DAC_A_ENABLE, 0);
+ status += MXL_SetGPIO(fe, 4, 0);
+ status += MXL_SetGPIO(fe, 3, 1);
+ status += MXL_SetGPIO(fe, 1, 1);
+ }
+ if (state->RF_IN >= 150000000 && state->RF_IN < 280000000) {
+ status += MXL_ControlWrite(fe, DAC_A_ENABLE, 0);
+ status += MXL_SetGPIO(fe, 4, 1);
+ status += MXL_SetGPIO(fe, 3, 0);
+ status += MXL_SetGPIO(fe, 1, 1);
+ }
+ if (state->RF_IN >= 280000000 && state->RF_IN < 360000000) {
+ status += MXL_ControlWrite(fe, DAC_A_ENABLE, 0);
+ status += MXL_SetGPIO(fe, 4, 1);
+ status += MXL_SetGPIO(fe, 3, 0);
+ status += MXL_SetGPIO(fe, 1, 0);
+ }
+ if (state->RF_IN >= 360000000 && state->RF_IN < 560000000) {
+ status += MXL_ControlWrite(fe, DAC_A_ENABLE, 0);
+ status += MXL_SetGPIO(fe, 4, 1);
+ status += MXL_SetGPIO(fe, 3, 1);
+ status += MXL_SetGPIO(fe, 1, 0);
+ }
+ if (state->RF_IN >= 560000000 && state->RF_IN < 580000000) {
+ status += MXL_ControlWrite(fe, DAC_A_ENABLE, 1);
+ status += MXL_SetGPIO(fe, 4, 1);
+ status += MXL_SetGPIO(fe, 3, 1);
+ status += MXL_SetGPIO(fe, 1, 0);
+ }
+ if (state->RF_IN >= 580000000 && state->RF_IN < 630000000) {
+ status += MXL_ControlWrite(fe, DAC_A_ENABLE, 1);
+ status += MXL_SetGPIO(fe, 4, 1);
+ status += MXL_SetGPIO(fe, 3, 1);
+ status += MXL_SetGPIO(fe, 1, 0);
+ }
+ if (state->RF_IN >= 630000000 && state->RF_IN < 700000000) {
+ status += MXL_ControlWrite(fe, DAC_A_ENABLE, 1);
+ status += MXL_SetGPIO(fe, 4, 1);
+ status += MXL_SetGPIO(fe, 3, 1);
+ status += MXL_SetGPIO(fe, 1, 1);
+ }
+ if (state->RF_IN >= 700000000 && state->RF_IN < 760000000) {
+ status += MXL_ControlWrite(fe, DAC_A_ENABLE, 1);
+ status += MXL_SetGPIO(fe, 4, 1);
+ status += MXL_SetGPIO(fe, 3, 1);
+ status += MXL_SetGPIO(fe, 1, 1);
+ }
+ if (state->RF_IN >= 760000000 && state->RF_IN <= 900000000) {
+ status += MXL_ControlWrite(fe, DAC_A_ENABLE, 1);
+ status += MXL_SetGPIO(fe, 4, 1);
+ status += MXL_SetGPIO(fe, 3, 1);
+ status += MXL_SetGPIO(fe, 1, 1);
+ }
+ }
+
+ if (state->TF_Type == MXL_TF_D) { /* Tracking Filter type D */
+
+ status += MXL_ControlWrite(fe, DAC_DIN_B, 0);
+
+ if (state->RF_IN >= 43000000 && state->RF_IN < 174000000) {
+ status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0);
+ status += MXL_SetGPIO(fe, 4, 0);
+ status += MXL_SetGPIO(fe, 1, 1);
+ status += MXL_SetGPIO(fe, 3, 1);
+ }
+ if (state->RF_IN >= 174000000 && state->RF_IN < 250000000) {
+ status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0);
+ status += MXL_SetGPIO(fe, 4, 0);
+ status += MXL_SetGPIO(fe, 1, 0);
+ status += MXL_SetGPIO(fe, 3, 1);
+ }
+ if (state->RF_IN >= 250000000 && state->RF_IN < 310000000) {
+ status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0);
+ status += MXL_SetGPIO(fe, 4, 1);
+ status += MXL_SetGPIO(fe, 1, 0);
+ status += MXL_SetGPIO(fe, 3, 1);
+ }
+ if (state->RF_IN >= 310000000 && state->RF_IN < 360000000) {
+ status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0);
+ status += MXL_SetGPIO(fe, 4, 1);
+ status += MXL_SetGPIO(fe, 1, 0);
+ status += MXL_SetGPIO(fe, 3, 0);
+ }
+ if (state->RF_IN >= 360000000 && state->RF_IN < 470000000) {
+ status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0);
+ status += MXL_SetGPIO(fe, 4, 1);
+ status += MXL_SetGPIO(fe, 1, 1);
+ status += MXL_SetGPIO(fe, 3, 0);
+ }
+ if (state->RF_IN >= 470000000 && state->RF_IN < 640000000) {
+ status += MXL_ControlWrite(fe, DAC_B_ENABLE, 1);
+ status += MXL_SetGPIO(fe, 4, 1);
+ status += MXL_SetGPIO(fe, 1, 1);
+ status += MXL_SetGPIO(fe, 3, 0);
+ }
+ if (state->RF_IN >= 640000000 && state->RF_IN <= 900000000) {
+ status += MXL_ControlWrite(fe, DAC_B_ENABLE, 1);
+ status += MXL_SetGPIO(fe, 4, 1);
+ status += MXL_SetGPIO(fe, 1, 1);
+ status += MXL_SetGPIO(fe, 3, 1);
+ }
+ }
+
+ if (state->TF_Type == MXL_TF_D_L) {
+
+ /* Tracking Filter type D-L for Lumanate ONLY change 2.6.3 */
+ status += MXL_ControlWrite(fe, DAC_DIN_A, 0);
+
+ /* if UHF and terrestrial => Turn off Tracking Filter */
+ if (state->RF_IN >= 471000000 &&
+ (state->RF_IN - 471000000)%6000000 != 0) {
+ /* Turn off all the banks */
+ status += MXL_SetGPIO(fe, 3, 1);
+ status += MXL_SetGPIO(fe, 1, 1);
+ status += MXL_SetGPIO(fe, 4, 1);
+ status += MXL_ControlWrite(fe, DAC_A_ENABLE, 0);
+ status += MXL_ControlWrite(fe, AGC_IF, 10);
+ } else {
+ /* if VHF or cable => Turn on Tracking Filter */
+ if (state->RF_IN >= 43000000 &&
+ state->RF_IN < 140000000) {
+
+ status += MXL_ControlWrite(fe, DAC_A_ENABLE, 0);
+ status += MXL_SetGPIO(fe, 4, 1);
+ status += MXL_SetGPIO(fe, 1, 1);
+ status += MXL_SetGPIO(fe, 3, 0);
+ }
+ if (state->RF_IN >= 140000000 &&
+ state->RF_IN < 240000000) {
+ status += MXL_ControlWrite(fe, DAC_A_ENABLE, 0);
+ status += MXL_SetGPIO(fe, 4, 1);
+ status += MXL_SetGPIO(fe, 1, 0);
+ status += MXL_SetGPIO(fe, 3, 0);
+ }
+ if (state->RF_IN >= 240000000 &&
+ state->RF_IN < 340000000) {
+ status += MXL_ControlWrite(fe, DAC_A_ENABLE, 0);
+ status += MXL_SetGPIO(fe, 4, 0);
+ status += MXL_SetGPIO(fe, 1, 1);
+ status += MXL_SetGPIO(fe, 3, 0);
+ }
+ if (state->RF_IN >= 340000000 &&
+ state->RF_IN < 430000000) {
+ status += MXL_ControlWrite(fe, DAC_A_ENABLE, 0);
+ status += MXL_SetGPIO(fe, 4, 0);
+ status += MXL_SetGPIO(fe, 1, 0);
+ status += MXL_SetGPIO(fe, 3, 1);
+ }
+ if (state->RF_IN >= 430000000 &&
+ state->RF_IN < 470000000) {
+ status += MXL_ControlWrite(fe, DAC_A_ENABLE, 1);
+ status += MXL_SetGPIO(fe, 4, 1);
+ status += MXL_SetGPIO(fe, 1, 0);
+ status += MXL_SetGPIO(fe, 3, 1);
+ }
+ if (state->RF_IN >= 470000000 &&
+ state->RF_IN < 570000000) {
+ status += MXL_ControlWrite(fe, DAC_A_ENABLE, 1);
+ status += MXL_SetGPIO(fe, 4, 0);
+ status += MXL_SetGPIO(fe, 1, 0);
+ status += MXL_SetGPIO(fe, 3, 1);
+ }
+ if (state->RF_IN >= 570000000 &&
+ state->RF_IN < 620000000) {
+ status += MXL_ControlWrite(fe, DAC_A_ENABLE, 0);
+ status += MXL_SetGPIO(fe, 4, 0);
+ status += MXL_SetGPIO(fe, 1, 1);
+ status += MXL_SetGPIO(fe, 3, 1);
+ }
+ if (state->RF_IN >= 620000000 &&
+ state->RF_IN < 760000000) {
+ status += MXL_ControlWrite(fe, DAC_A_ENABLE, 1);
+ status += MXL_SetGPIO(fe, 4, 0);
+ status += MXL_SetGPIO(fe, 1, 1);
+ status += MXL_SetGPIO(fe, 3, 1);
+ }
+ if (state->RF_IN >= 760000000 &&
+ state->RF_IN <= 900000000) {
+ status += MXL_ControlWrite(fe, DAC_A_ENABLE, 1);
+ status += MXL_SetGPIO(fe, 4, 1);
+ status += MXL_SetGPIO(fe, 1, 1);
+ status += MXL_SetGPIO(fe, 3, 1);
+ }
+ }
+ }
+
+ if (state->TF_Type == MXL_TF_E) /* Tracking Filter type E */ {
+
+ status += MXL_ControlWrite(fe, DAC_DIN_B, 0);
+
+ if (state->RF_IN >= 43000000 && state->RF_IN < 174000000) {
+ status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0);
+ status += MXL_SetGPIO(fe, 4, 0);
+ status += MXL_SetGPIO(fe, 1, 1);
+ status += MXL_SetGPIO(fe, 3, 1);
+ }
+ if (state->RF_IN >= 174000000 && state->RF_IN < 250000000) {
+ status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0);
+ status += MXL_SetGPIO(fe, 4, 0);
+ status += MXL_SetGPIO(fe, 1, 0);
+ status += MXL_SetGPIO(fe, 3, 1);
+ }
+ if (state->RF_IN >= 250000000 && state->RF_IN < 310000000) {
+ status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0);
+ status += MXL_SetGPIO(fe, 4, 1);
+ status += MXL_SetGPIO(fe, 1, 0);
+ status += MXL_SetGPIO(fe, 3, 1);
+ }
+ if (state->RF_IN >= 310000000 && state->RF_IN < 360000000) {
+ status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0);
+ status += MXL_SetGPIO(fe, 4, 1);
+ status += MXL_SetGPIO(fe, 1, 0);
+ status += MXL_SetGPIO(fe, 3, 0);
+ }
+ if (state->RF_IN >= 360000000 && state->RF_IN < 470000000) {
+ status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0);
+ status += MXL_SetGPIO(fe, 4, 1);
+ status += MXL_SetGPIO(fe, 1, 1);
+ status += MXL_SetGPIO(fe, 3, 0);
+ }
+ if (state->RF_IN >= 470000000 && state->RF_IN < 640000000) {
+ status += MXL_ControlWrite(fe, DAC_B_ENABLE, 1);
+ status += MXL_SetGPIO(fe, 4, 1);
+ status += MXL_SetGPIO(fe, 1, 1);
+ status += MXL_SetGPIO(fe, 3, 0);
+ }
+ if (state->RF_IN >= 640000000 && state->RF_IN <= 900000000) {
+ status += MXL_ControlWrite(fe, DAC_B_ENABLE, 1);
+ status += MXL_SetGPIO(fe, 4, 1);
+ status += MXL_SetGPIO(fe, 1, 1);
+ status += MXL_SetGPIO(fe, 3, 1);
+ }
+ }
+
+ if (state->TF_Type == MXL_TF_F) {
+
+ /* Tracking Filter type F */
+ status += MXL_ControlWrite(fe, DAC_DIN_B, 0);
+
+ if (state->RF_IN >= 43000000 && state->RF_IN < 160000000) {
+ status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0);
+ status += MXL_SetGPIO(fe, 4, 0);
+ status += MXL_SetGPIO(fe, 1, 1);
+ status += MXL_SetGPIO(fe, 3, 1);
+ }
+ if (state->RF_IN >= 160000000 && state->RF_IN < 210000000) {
+ status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0);
+ status += MXL_SetGPIO(fe, 4, 0);
+ status += MXL_SetGPIO(fe, 1, 0);
+ status += MXL_SetGPIO(fe, 3, 1);
+ }
+ if (state->RF_IN >= 210000000 && state->RF_IN < 300000000) {
+ status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0);
+ status += MXL_SetGPIO(fe, 4, 1);
+ status += MXL_SetGPIO(fe, 1, 0);
+ status += MXL_SetGPIO(fe, 3, 1);
+ }
+ if (state->RF_IN >= 300000000 && state->RF_IN < 390000000) {
+ status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0);
+ status += MXL_SetGPIO(fe, 4, 1);
+ status += MXL_SetGPIO(fe, 1, 0);
+ status += MXL_SetGPIO(fe, 3, 0);
+ }
+ if (state->RF_IN >= 390000000 && state->RF_IN < 515000000) {
+ status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0);
+ status += MXL_SetGPIO(fe, 4, 1);
+ status += MXL_SetGPIO(fe, 1, 1);
+ status += MXL_SetGPIO(fe, 3, 0);
+ }
+ if (state->RF_IN >= 515000000 && state->RF_IN < 650000000) {
+ status += MXL_ControlWrite(fe, DAC_B_ENABLE, 1);
+ status += MXL_SetGPIO(fe, 4, 1);
+ status += MXL_SetGPIO(fe, 1, 1);
+ status += MXL_SetGPIO(fe, 3, 0);
+ }
+ if (state->RF_IN >= 650000000 && state->RF_IN <= 900000000) {
+ status += MXL_ControlWrite(fe, DAC_B_ENABLE, 1);
+ status += MXL_SetGPIO(fe, 4, 1);
+ status += MXL_SetGPIO(fe, 1, 1);
+ status += MXL_SetGPIO(fe, 3, 1);
+ }
+ }
+
+ if (state->TF_Type == MXL_TF_E_2) {
+
+ /* Tracking Filter type E_2 */
+ status += MXL_ControlWrite(fe, DAC_DIN_B, 0);
+
+ if (state->RF_IN >= 43000000 && state->RF_IN < 174000000) {
+ status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0);
+ status += MXL_SetGPIO(fe, 4, 0);
+ status += MXL_SetGPIO(fe, 1, 1);
+ status += MXL_SetGPIO(fe, 3, 1);
+ }
+ if (state->RF_IN >= 174000000 && state->RF_IN < 250000000) {
+ status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0);
+ status += MXL_SetGPIO(fe, 4, 0);
+ status += MXL_SetGPIO(fe, 1, 0);
+ status += MXL_SetGPIO(fe, 3, 1);
+ }
+ if (state->RF_IN >= 250000000 && state->RF_IN < 350000000) {
+ status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0);
+ status += MXL_SetGPIO(fe, 4, 1);
+ status += MXL_SetGPIO(fe, 1, 0);
+ status += MXL_SetGPIO(fe, 3, 1);
+ }
+ if (state->RF_IN >= 350000000 && state->RF_IN < 400000000) {
+ status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0);
+ status += MXL_SetGPIO(fe, 4, 1);
+ status += MXL_SetGPIO(fe, 1, 0);
+ status += MXL_SetGPIO(fe, 3, 0);
+ }
+ if (state->RF_IN >= 400000000 && state->RF_IN < 570000000) {
+ status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0);
+ status += MXL_SetGPIO(fe, 4, 1);
+ status += MXL_SetGPIO(fe, 1, 1);
+ status += MXL_SetGPIO(fe, 3, 0);
+ }
+ if (state->RF_IN >= 570000000 && state->RF_IN < 770000000) {
+ status += MXL_ControlWrite(fe, DAC_B_ENABLE, 1);
+ status += MXL_SetGPIO(fe, 4, 1);
+ status += MXL_SetGPIO(fe, 1, 1);
+ status += MXL_SetGPIO(fe, 3, 0);
+ }
+ if (state->RF_IN >= 770000000 && state->RF_IN <= 900000000) {
+ status += MXL_ControlWrite(fe, DAC_B_ENABLE, 1);
+ status += MXL_SetGPIO(fe, 4, 1);
+ status += MXL_SetGPIO(fe, 1, 1);
+ status += MXL_SetGPIO(fe, 3, 1);
+ }
+ }
+
+ if (state->TF_Type == MXL_TF_G) {
+
+ /* Tracking Filter type G add for v2.6.8 */
+ status += MXL_ControlWrite(fe, DAC_DIN_B, 0);
+
+ if (state->RF_IN >= 50000000 && state->RF_IN < 190000000) {
+
+ status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0);
+ status += MXL_SetGPIO(fe, 4, 0);
+ status += MXL_SetGPIO(fe, 1, 1);
+ status += MXL_SetGPIO(fe, 3, 1);
+ }
+ if (state->RF_IN >= 190000000 && state->RF_IN < 280000000) {
+ status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0);
+ status += MXL_SetGPIO(fe, 4, 0);
+ status += MXL_SetGPIO(fe, 1, 0);
+ status += MXL_SetGPIO(fe, 3, 1);
+ }
+ if (state->RF_IN >= 280000000 && state->RF_IN < 350000000) {
+ status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0);
+ status += MXL_SetGPIO(fe, 4, 1);
+ status += MXL_SetGPIO(fe, 1, 0);
+ status += MXL_SetGPIO(fe, 3, 1);
+ }
+ if (state->RF_IN >= 350000000 && state->RF_IN < 400000000) {
+ status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0);
+ status += MXL_SetGPIO(fe, 4, 1);
+ status += MXL_SetGPIO(fe, 1, 0);
+ status += MXL_SetGPIO(fe, 3, 0);
+ }
+ if (state->RF_IN >= 400000000 && state->RF_IN < 470000000) {
+ status += MXL_ControlWrite(fe, DAC_B_ENABLE, 1);
+ status += MXL_SetGPIO(fe, 4, 1);
+ status += MXL_SetGPIO(fe, 1, 0);
+ status += MXL_SetGPIO(fe, 3, 1);
+ }
+ if (state->RF_IN >= 470000000 && state->RF_IN < 640000000) {
+ status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0);
+ status += MXL_SetGPIO(fe, 4, 1);
+ status += MXL_SetGPIO(fe, 1, 1);
+ status += MXL_SetGPIO(fe, 3, 0);
+ }
+ if (state->RF_IN >= 640000000 && state->RF_IN < 820000000) {
+ status += MXL_ControlWrite(fe, DAC_B_ENABLE, 1);
+ status += MXL_SetGPIO(fe, 4, 1);
+ status += MXL_SetGPIO(fe, 1, 1);
+ status += MXL_SetGPIO(fe, 3, 0);
+ }
+ if (state->RF_IN >= 820000000 && state->RF_IN <= 900000000) {
+ status += MXL_ControlWrite(fe, DAC_B_ENABLE, 1);
+ status += MXL_SetGPIO(fe, 4, 1);
+ status += MXL_SetGPIO(fe, 1, 1);
+ status += MXL_SetGPIO(fe, 3, 1);
+ }
+ }
+
+ if (state->TF_Type == MXL_TF_E_NA) {
+
+ /* Tracking Filter type E-NA for Empia ONLY change for 2.6.8 */
+ status += MXL_ControlWrite(fe, DAC_DIN_B, 0);
+
+ /* if UHF and terrestrial=> Turn off Tracking Filter */
+ if (state->RF_IN >= 471000000 &&
+ (state->RF_IN - 471000000)%6000000 != 0) {
+
+ /* Turn off all the banks */
+ status += MXL_SetGPIO(fe, 3, 1);
+ status += MXL_SetGPIO(fe, 1, 1);
+ status += MXL_SetGPIO(fe, 4, 1);
+ status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0);
+
+ /* 2.6.12 Turn on RSSI */
+ status += MXL_ControlWrite(fe, SEQ_EXTSYNTHCALIF, 1);
+ status += MXL_ControlWrite(fe, SEQ_EXTDCCAL, 1);
+ status += MXL_ControlWrite(fe, AGC_EN_RSSI, 1);
+ status += MXL_ControlWrite(fe, RFA_ENCLKRFAGC, 1);
+
+ /* RSSI reference point */
+ status += MXL_ControlWrite(fe, RFA_RSSI_REFH, 5);
+ status += MXL_ControlWrite(fe, RFA_RSSI_REF, 3);
+ status += MXL_ControlWrite(fe, RFA_RSSI_REFL, 2);
+
+ /* following parameter is from analog OTA mode,
+ * can be change to seek better performance */
+ status += MXL_ControlWrite(fe, RFSYN_CHP_GAIN, 3);
+ } else {
+ /* if VHF or Cable => Turn on Tracking Filter */
+
+ /* 2.6.12 Turn off RSSI */
+ status += MXL_ControlWrite(fe, AGC_EN_RSSI, 0);
+
+ /* change back from above condition */
+ status += MXL_ControlWrite(fe, RFSYN_CHP_GAIN, 5);
+
+
+ if (state->RF_IN >= 43000000 && state->RF_IN < 174000000) {
+
+ status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0);
+ status += MXL_SetGPIO(fe, 4, 0);
+ status += MXL_SetGPIO(fe, 1, 1);
+ status += MXL_SetGPIO(fe, 3, 1);
+ }
+ if (state->RF_IN >= 174000000 && state->RF_IN < 250000000) {
+ status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0);
+ status += MXL_SetGPIO(fe, 4, 0);
+ status += MXL_SetGPIO(fe, 1, 0);
+ status += MXL_SetGPIO(fe, 3, 1);
+ }
+ if (state->RF_IN >= 250000000 && state->RF_IN < 350000000) {
+ status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0);
+ status += MXL_SetGPIO(fe, 4, 1);
+ status += MXL_SetGPIO(fe, 1, 0);
+ status += MXL_SetGPIO(fe, 3, 1);
+ }
+ if (state->RF_IN >= 350000000 && state->RF_IN < 400000000) {
+ status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0);
+ status += MXL_SetGPIO(fe, 4, 1);
+ status += MXL_SetGPIO(fe, 1, 0);
+ status += MXL_SetGPIO(fe, 3, 0);
+ }
+ if (state->RF_IN >= 400000000 && state->RF_IN < 570000000) {
+ status += MXL_ControlWrite(fe, DAC_B_ENABLE, 0);
+ status += MXL_SetGPIO(fe, 4, 1);
+ status += MXL_SetGPIO(fe, 1, 1);
+ status += MXL_SetGPIO(fe, 3, 0);
+ }
+ if (state->RF_IN >= 570000000 && state->RF_IN < 770000000) {
+ status += MXL_ControlWrite(fe, DAC_B_ENABLE, 1);
+ status += MXL_SetGPIO(fe, 4, 1);
+ status += MXL_SetGPIO(fe, 1, 1);
+ status += MXL_SetGPIO(fe, 3, 0);
+ }
+ if (state->RF_IN >= 770000000 && state->RF_IN <= 900000000) {
+ status += MXL_ControlWrite(fe, DAC_B_ENABLE, 1);
+ status += MXL_SetGPIO(fe, 4, 1);
+ status += MXL_SetGPIO(fe, 1, 1);
+ status += MXL_SetGPIO(fe, 3, 1);
+ }
+ }
+ }
+ return status ;
+}
+
+static u16 MXL_SetGPIO(struct dvb_frontend *fe, u8 GPIO_Num, u8 GPIO_Val)
+{
+ u16 status = 0;
+
+ if (GPIO_Num == 1)
+ status += MXL_ControlWrite(fe, GPIO_1B, GPIO_Val ? 0 : 1);
+
+ /* GPIO2 is not available */
+
+ if (GPIO_Num == 3) {
+ if (GPIO_Val == 1) {
+ status += MXL_ControlWrite(fe, GPIO_3, 0);
+ status += MXL_ControlWrite(fe, GPIO_3B, 0);
+ }
+ if (GPIO_Val == 0) {
+ status += MXL_ControlWrite(fe, GPIO_3, 1);
+ status += MXL_ControlWrite(fe, GPIO_3B, 1);
+ }
+ if (GPIO_Val == 3) { /* tri-state */
+ status += MXL_ControlWrite(fe, GPIO_3, 0);
+ status += MXL_ControlWrite(fe, GPIO_3B, 1);
+ }
+ }
+ if (GPIO_Num == 4) {
+ if (GPIO_Val == 1) {
+ status += MXL_ControlWrite(fe, GPIO_4, 0);
+ status += MXL_ControlWrite(fe, GPIO_4B, 0);
+ }
+ if (GPIO_Val == 0) {
+ status += MXL_ControlWrite(fe, GPIO_4, 1);
+ status += MXL_ControlWrite(fe, GPIO_4B, 1);
+ }
+ if (GPIO_Val == 3) { /* tri-state */
+ status += MXL_ControlWrite(fe, GPIO_4, 0);
+ status += MXL_ControlWrite(fe, GPIO_4B, 1);
+ }
+ }
+
+ return status;
+}
+
+static u16 MXL_ControlWrite(struct dvb_frontend *fe, u16 ControlNum, u32 value)
+{
+ u16 status = 0;
+
+ /* Will write ALL Matching Control Name */
+ /* Write Matching INIT Control */
+ status += MXL_ControlWrite_Group(fe, ControlNum, value, 1);
+ /* Write Matching CH Control */
+ status += MXL_ControlWrite_Group(fe, ControlNum, value, 2);
+#ifdef _MXL_INTERNAL
+ /* Write Matching MXL Control */
+ status += MXL_ControlWrite_Group(fe, ControlNum, value, 3);
+#endif
+ return status;
+}
+
+static u16 MXL_ControlWrite_Group(struct dvb_frontend *fe, u16 controlNum,
+ u32 value, u16 controlGroup)
+{
+ struct mxl5005s_state *state = fe->tuner_priv;
+ u16 i, j, k;
+ u32 highLimit;
+ u32 ctrlVal;
+
+ if (controlGroup == 1) /* Initial Control */ {
+
+ for (i = 0; i < state->Init_Ctrl_Num; i++) {
+
+ if (controlNum == state->Init_Ctrl[i].Ctrl_Num) {
+
+ highLimit = 1 << state->Init_Ctrl[i].size;
+ if (value < highLimit) {
+ for (j = 0; j < state->Init_Ctrl[i].size; j++) {
+ state->Init_Ctrl[i].val[j] = (u8)((value >> j) & 0x01);
+ MXL_RegWriteBit(fe, (u8)(state->Init_Ctrl[i].addr[j]),
+ (u8)(state->Init_Ctrl[i].bit[j]),
+ (u8)((value>>j) & 0x01));
+ }
+ ctrlVal = 0;
+ for (k = 0; k < state->Init_Ctrl[i].size; k++)
+ ctrlVal += state->Init_Ctrl[i].val[k] * (1 << k);
+ } else
+ return -1;
+ }
+ }
+ }
+ if (controlGroup == 2) /* Chan change Control */ {
+
+ for (i = 0; i < state->CH_Ctrl_Num; i++) {
+
+ if (controlNum == state->CH_Ctrl[i].Ctrl_Num) {
+
+ highLimit = 1 << state->CH_Ctrl[i].size;
+ if (value < highLimit) {
+ for (j = 0; j < state->CH_Ctrl[i].size; j++) {
+ state->CH_Ctrl[i].val[j] = (u8)((value >> j) & 0x01);
+ MXL_RegWriteBit(fe, (u8)(state->CH_Ctrl[i].addr[j]),
+ (u8)(state->CH_Ctrl[i].bit[j]),
+ (u8)((value>>j) & 0x01));
+ }
+ ctrlVal = 0;
+ for (k = 0; k < state->CH_Ctrl[i].size; k++)
+ ctrlVal += state->CH_Ctrl[i].val[k] * (1 << k);
+ } else
+ return -1;
+ }
+ }
+ }
+#ifdef _MXL_INTERNAL
+ if (controlGroup == 3) /* Maxlinear Control */ {
+
+ for (i = 0; i < state->MXL_Ctrl_Num; i++) {
+
+ if (controlNum == state->MXL_Ctrl[i].Ctrl_Num) {
+
+ highLimit = (1 << state->MXL_Ctrl[i].size);
+ if (value < highLimit) {
+ for (j = 0; j < state->MXL_Ctrl[i].size; j++) {
+ state->MXL_Ctrl[i].val[j] = (u8)((value >> j) & 0x01);
+ MXL_RegWriteBit(fe, (u8)(state->MXL_Ctrl[i].addr[j]),
+ (u8)(state->MXL_Ctrl[i].bit[j]),
+ (u8)((value>>j) & 0x01));
+ }
+ ctrlVal = 0;
+ for (k = 0; k < state->MXL_Ctrl[i].size; k++)
+ ctrlVal += state->MXL_Ctrl[i].val[k] * (1 << k);
+ } else
+ return -1;
+ }
+ }
+ }
+#endif
+ return 0 ; /* successful return */
+}
+
+static u16 MXL_RegRead(struct dvb_frontend *fe, u8 RegNum, u8 *RegVal)
+{
+ struct mxl5005s_state *state = fe->tuner_priv;
+ int i ;
+
+ for (i = 0; i < 104; i++) {
+ if (RegNum == state->TunerRegs[i].Reg_Num) {
+ *RegVal = (u8)(state->TunerRegs[i].Reg_Val);
+ return 0;
+ }
+ }
+
+ return 1;
+}
+
+static u16 MXL_ControlRead(struct dvb_frontend *fe, u16 controlNum, u32 *value)
+{
+ struct mxl5005s_state *state = fe->tuner_priv;
+ u32 ctrlVal ;
+ u16 i, k ;
+
+ for (i = 0; i < state->Init_Ctrl_Num ; i++) {
+
+ if (controlNum == state->Init_Ctrl[i].Ctrl_Num) {
+
+ ctrlVal = 0;
+ for (k = 0; k < state->Init_Ctrl[i].size; k++)
+ ctrlVal += state->Init_Ctrl[i].val[k] * (1<<k);
+ *value = ctrlVal;
+ return 0;
+ }
+ }
+
+ for (i = 0; i < state->CH_Ctrl_Num ; i++) {
+
+ if (controlNum == state->CH_Ctrl[i].Ctrl_Num) {
+
+ ctrlVal = 0;
+ for (k = 0; k < state->CH_Ctrl[i].size; k++)
+ ctrlVal += state->CH_Ctrl[i].val[k] * (1 << k);
+ *value = ctrlVal;
+ return 0;
+
+ }
+ }
+
+#ifdef _MXL_INTERNAL
+ for (i = 0; i < state->MXL_Ctrl_Num ; i++) {
+
+ if (controlNum == state->MXL_Ctrl[i].Ctrl_Num) {
+
+ ctrlVal = 0;
+ for (k = 0; k < state->MXL_Ctrl[i].size; k++)
+ ctrlVal += state->MXL_Ctrl[i].val[k] * (1<<k);
+ *value = ctrlVal;
+ return 0;
+
+ }
+ }
+#endif
+ return 1;
+}
+
+static void MXL_RegWriteBit(struct dvb_frontend *fe, u8 address, u8 bit,
+ u8 bitVal)
+{
+ struct mxl5005s_state *state = fe->tuner_priv;
+ int i ;
+
+ const u8 AND_MAP[8] = {
+ 0xFE, 0xFD, 0xFB, 0xF7,
+ 0xEF, 0xDF, 0xBF, 0x7F } ;
+
+ const u8 OR_MAP[8] = {
+ 0x01, 0x02, 0x04, 0x08,
+ 0x10, 0x20, 0x40, 0x80 } ;
+
+ for (i = 0; i < state->TunerRegs_Num; i++) {
+ if (state->TunerRegs[i].Reg_Num == address) {
+ if (bitVal)
+ state->TunerRegs[i].Reg_Val |= OR_MAP[bit];
+ else
+ state->TunerRegs[i].Reg_Val &= AND_MAP[bit];
+ break ;
+ }
+ }
+}
+
+static u32 MXL_Ceiling(u32 value, u32 resolution)
+{
+ return (value/resolution + (value % resolution > 0 ? 1 : 0));
+}
+
+/* Retrieve the Initialzation Registers */
+static u16 MXL_GetInitRegister(struct dvb_frontend *fe, u8 *RegNum,
+ u8 *RegVal, int *count)
+{
+ u16 status = 0;
+ int i ;
+
+ u8 RegAddr[] = {
+ 11, 12, 13, 22, 32, 43, 44, 53, 56, 59, 73,
+ 76, 77, 91, 134, 135, 137, 147,
+ 156, 166, 167, 168, 25 };
+
+ *count = sizeof(RegAddr) / sizeof(u8);
+
+ status += MXL_BlockInit(fe);
+
+ for (i = 0 ; i < *count; i++) {
+ RegNum[i] = RegAddr[i];
+ status += MXL_RegRead(fe, RegNum[i], &RegVal[i]);
+ }
+
+ return status;
+}
+
+static u16 MXL_GetCHRegister(struct dvb_frontend *fe, u8 *RegNum, u8 *RegVal,
+ int *count)
+{
+ u16 status = 0;
+ int i ;
+
+/* add 77, 166, 167, 168 register for 2.6.12 */
+#ifdef _MXL_PRODUCTION
+ u8 RegAddr[] = {14, 15, 16, 17, 22, 43, 65, 68, 69, 70, 73, 92, 93, 106,
+ 107, 108, 109, 110, 111, 112, 136, 138, 149, 77, 166, 167, 168 } ;
+#else
+ u8 RegAddr[] = {14, 15, 16, 17, 22, 43, 68, 69, 70, 73, 92, 93, 106,
+ 107, 108, 109, 110, 111, 112, 136, 138, 149, 77, 166, 167, 168 } ;
+ /*
+ u8 RegAddr[171];
+ for (i = 0; i <= 170; i++)
+ RegAddr[i] = i;
+ */
+#endif
+
+ *count = sizeof(RegAddr) / sizeof(u8);
+
+ for (i = 0 ; i < *count; i++) {
+ RegNum[i] = RegAddr[i];
+ status += MXL_RegRead(fe, RegNum[i], &RegVal[i]);
+ }
+
+ return status;
+}
+
+static u16 MXL_GetCHRegister_ZeroIF(struct dvb_frontend *fe, u8 *RegNum,
+ u8 *RegVal, int *count)
+{
+ u16 status = 0;
+ int i;
+
+ u8 RegAddr[] = {43, 136};
+
+ *count = sizeof(RegAddr) / sizeof(u8);
+
+ for (i = 0; i < *count; i++) {
+ RegNum[i] = RegAddr[i];
+ status += MXL_RegRead(fe, RegNum[i], &RegVal[i]);
+ }
+
+ return status;
+}
+
+static u16 MXL_GetMasterControl(u8 *MasterReg, int state)
+{
+ if (state == 1) /* Load_Start */
+ *MasterReg = 0xF3;
+ if (state == 2) /* Power_Down */
+ *MasterReg = 0x41;
+ if (state == 3) /* Synth_Reset */
+ *MasterReg = 0xB1;
+ if (state == 4) /* Seq_Off */
+ *MasterReg = 0xF1;
+
+ return 0;
+}
+
+#ifdef _MXL_PRODUCTION
+static u16 MXL_VCORange_Test(struct dvb_frontend *fe, int VCO_Range)
+{
+ struct mxl5005s_state *state = fe->tuner_priv;
+ u16 status = 0 ;
+
+ if (VCO_Range == 1) {
+ status += MXL_ControlWrite(fe, RFSYN_EN_DIV, 1);
+ status += MXL_ControlWrite(fe, RFSYN_EN_OUTMUX, 0);
+ status += MXL_ControlWrite(fe, RFSYN_SEL_DIVM, 0);
+ status += MXL_ControlWrite(fe, RFSYN_DIVM, 1);
+ status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_OUT, 1);
+ status += MXL_ControlWrite(fe, RFSYN_RF_DIV_BIAS, 1);
+ status += MXL_ControlWrite(fe, DN_SEL_FREQ, 0);
+ if (state->Mode == 0 && state->IF_Mode == 1) {
+ /* Analog Low IF Mode */
+ status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_HI, 1);
+ status += MXL_ControlWrite(fe, RFSYN_VCO_BIAS, 8);
+ status += MXL_ControlWrite(fe, CHCAL_INT_MOD_RF, 56);
+ status += MXL_ControlWrite(fe,
+ CHCAL_FRAC_MOD_RF, 180224);
+ }
+ if (state->Mode == 0 && state->IF_Mode == 0) {
+ /* Analog Zero IF Mode */
+ status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_HI, 1);
+ status += MXL_ControlWrite(fe, RFSYN_VCO_BIAS, 8);
+ status += MXL_ControlWrite(fe, CHCAL_INT_MOD_RF, 56);
+ status += MXL_ControlWrite(fe,
+ CHCAL_FRAC_MOD_RF, 222822);
+ }
+ if (state->Mode == 1) /* Digital Mode */ {
+ status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_HI, 1);
+ status += MXL_ControlWrite(fe, RFSYN_VCO_BIAS, 8);
+ status += MXL_ControlWrite(fe, CHCAL_INT_MOD_RF, 56);
+ status += MXL_ControlWrite(fe,
+ CHCAL_FRAC_MOD_RF, 229376);
+ }
+ }
+
+ if (VCO_Range == 2) {
+ status += MXL_ControlWrite(fe, RFSYN_EN_DIV, 1);
+ status += MXL_ControlWrite(fe, RFSYN_EN_OUTMUX, 0);
+ status += MXL_ControlWrite(fe, RFSYN_SEL_DIVM, 0);
+ status += MXL_ControlWrite(fe, RFSYN_DIVM, 1);
+ status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_OUT, 1);
+ status += MXL_ControlWrite(fe, RFSYN_RF_DIV_BIAS, 1);
+ status += MXL_ControlWrite(fe, DN_SEL_FREQ, 0);
+ status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_HI, 1);
+ status += MXL_ControlWrite(fe, RFSYN_VCO_BIAS, 40);
+ status += MXL_ControlWrite(fe, CHCAL_INT_MOD_RF, 41);
+ if (state->Mode == 0 && state->IF_Mode == 1) {
+ /* Analog Low IF Mode */
+ status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_HI, 1);
+ status += MXL_ControlWrite(fe, RFSYN_VCO_BIAS, 40);
+ status += MXL_ControlWrite(fe, CHCAL_INT_MOD_RF, 42);
+ status += MXL_ControlWrite(fe,
+ CHCAL_FRAC_MOD_RF, 206438);
+ }
+ if (state->Mode == 0 && state->IF_Mode == 0) {
+ /* Analog Zero IF Mode */
+ status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_HI, 1);
+ status += MXL_ControlWrite(fe, RFSYN_VCO_BIAS, 40);
+ status += MXL_ControlWrite(fe, CHCAL_INT_MOD_RF, 42);
+ status += MXL_ControlWrite(fe,
+ CHCAL_FRAC_MOD_RF, 206438);
+ }
+ if (state->Mode == 1) /* Digital Mode */ {
+ status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_HI, 1);
+ status += MXL_ControlWrite(fe, RFSYN_VCO_BIAS, 40);
+ status += MXL_ControlWrite(fe, CHCAL_INT_MOD_RF, 41);
+ status += MXL_ControlWrite(fe,
+ CHCAL_FRAC_MOD_RF, 16384);
+ }
+ }
+
+ if (VCO_Range == 3) {
+ status += MXL_ControlWrite(fe, RFSYN_EN_DIV, 1);
+ status += MXL_ControlWrite(fe, RFSYN_EN_OUTMUX, 0);
+ status += MXL_ControlWrite(fe, RFSYN_SEL_DIVM, 0);
+ status += MXL_ControlWrite(fe, RFSYN_DIVM, 1);
+ status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_OUT, 1);
+ status += MXL_ControlWrite(fe, RFSYN_RF_DIV_BIAS, 1);
+ status += MXL_ControlWrite(fe, DN_SEL_FREQ, 0);
+ status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_HI, 0);
+ status += MXL_ControlWrite(fe, RFSYN_VCO_BIAS, 8);
+ status += MXL_ControlWrite(fe, CHCAL_INT_MOD_RF, 42);
+ if (state->Mode == 0 && state->IF_Mode == 1) {
+ /* Analog Low IF Mode */
+ status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_HI, 0);
+ status += MXL_ControlWrite(fe, RFSYN_VCO_BIAS, 8);
+ status += MXL_ControlWrite(fe, CHCAL_INT_MOD_RF, 44);
+ status += MXL_ControlWrite(fe,
+ CHCAL_FRAC_MOD_RF, 173670);
+ }
+ if (state->Mode == 0 && state->IF_Mode == 0) {
+ /* Analog Zero IF Mode */
+ status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_HI, 0);
+ status += MXL_ControlWrite(fe, RFSYN_VCO_BIAS, 8);
+ status += MXL_ControlWrite(fe, CHCAL_INT_MOD_RF, 44);
+ status += MXL_ControlWrite(fe,
+ CHCAL_FRAC_MOD_RF, 173670);
+ }
+ if (state->Mode == 1) /* Digital Mode */ {
+ status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_HI, 0);
+ status += MXL_ControlWrite(fe, RFSYN_VCO_BIAS, 8);
+ status += MXL_ControlWrite(fe, CHCAL_INT_MOD_RF, 42);
+ status += MXL_ControlWrite(fe,
+ CHCAL_FRAC_MOD_RF, 245760);
+ }
+ }
+
+ if (VCO_Range == 4) {
+ status += MXL_ControlWrite(fe, RFSYN_EN_DIV, 1);
+ status += MXL_ControlWrite(fe, RFSYN_EN_OUTMUX, 0);
+ status += MXL_ControlWrite(fe, RFSYN_SEL_DIVM, 0);
+ status += MXL_ControlWrite(fe, RFSYN_DIVM, 1);
+ status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_OUT, 1);
+ status += MXL_ControlWrite(fe, RFSYN_RF_DIV_BIAS, 1);
+ status += MXL_ControlWrite(fe, DN_SEL_FREQ, 0);
+ status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_HI, 0);
+ status += MXL_ControlWrite(fe, RFSYN_VCO_BIAS, 40);
+ status += MXL_ControlWrite(fe, CHCAL_INT_MOD_RF, 27);
+ if (state->Mode == 0 && state->IF_Mode == 1) {
+ /* Analog Low IF Mode */
+ status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_HI, 0);
+ status += MXL_ControlWrite(fe, RFSYN_VCO_BIAS, 40);
+ status += MXL_ControlWrite(fe, CHCAL_INT_MOD_RF, 27);
+ status += MXL_ControlWrite(fe,
+ CHCAL_FRAC_MOD_RF, 206438);
+ }
+ if (state->Mode == 0 && state->IF_Mode == 0) {
+ /* Analog Zero IF Mode */
+ status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_HI, 0);
+ status += MXL_ControlWrite(fe, RFSYN_VCO_BIAS, 40);
+ status += MXL_ControlWrite(fe, CHCAL_INT_MOD_RF, 27);
+ status += MXL_ControlWrite(fe,
+ CHCAL_FRAC_MOD_RF, 206438);
+ }
+ if (state->Mode == 1) /* Digital Mode */ {
+ status += MXL_ControlWrite(fe, RFSYN_SEL_VCO_HI, 0);
+ status += MXL_ControlWrite(fe, RFSYN_VCO_BIAS, 40);
+ status += MXL_ControlWrite(fe, CHCAL_INT_MOD_RF, 27);
+ status += MXL_ControlWrite(fe,
+ CHCAL_FRAC_MOD_RF, 212992);
+ }
+ }
+
+ return status;
+}
+
+static u16 MXL_Hystersis_Test(struct dvb_frontend *fe, int Hystersis)
+{
+ struct mxl5005s_state *state = fe->tuner_priv;
+ u16 status = 0;
+
+ if (Hystersis == 1)
+ status += MXL_ControlWrite(fe, DN_BYPASS_AGC_I2C, 1);
+
+ return status;
+}
+#endif
+/* End: Reference driver code found in the Realtek driver that
+ * is copyright MaxLinear */
+
+/* ----------------------------------------------------------------
+ * Begin: Everything after here is new code to adapt the
+ * proprietary Realtek driver into a Linux API tuner.
+ * Copyright (C) 2008 Steven Toth <stoth@hauppauge.com>
+ */
+static int mxl5005s_reset(struct dvb_frontend *fe)
+{
+ struct mxl5005s_state *state = fe->tuner_priv;
+ int ret = 0;
+
+ u8 buf[2] = { 0xff, 0x00 };
+ struct i2c_msg msg = { .addr = state->config->i2c_address, .flags = 0,
+ .buf = buf, .len = 2 };
+
+ dprintk(2, "%s()\n", __func__);
+
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+
+ if (i2c_transfer(state->i2c, &msg, 1) != 1) {
+ printk(KERN_WARNING "mxl5005s I2C reset failed\n");
+ ret = -EREMOTEIO;
+ }
+
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 0);
+
+ return ret;
+}
+
+/* Write a single byte to a single reg, latch the value if required by
+ * following the transaction with the latch byte.
+ */
+static int mxl5005s_writereg(struct dvb_frontend *fe, u8 reg, u8 val, int latch)
+{
+ struct mxl5005s_state *state = fe->tuner_priv;
+ u8 buf[3] = { reg, val, MXL5005S_LATCH_BYTE };
+ struct i2c_msg msg = { .addr = state->config->i2c_address, .flags = 0,
+ .buf = buf, .len = 3 };
+
+ if (latch == 0)
+ msg.len = 2;
+
+ dprintk(2, "%s(0x%x, 0x%x, 0x%x)\n", __func__, reg, val, msg.addr);
+
+ if (i2c_transfer(state->i2c, &msg, 1) != 1) {
+ printk(KERN_WARNING "mxl5005s I2C write failed\n");
+ return -EREMOTEIO;
+ }
+ return 0;
+}
+
+static int mxl5005s_writeregs(struct dvb_frontend *fe, u8 *addrtable,
+ u8 *datatable, u8 len)
+{
+ int ret = 0, i;
+
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+
+ for (i = 0 ; i < len-1; i++) {
+ ret = mxl5005s_writereg(fe, addrtable[i], datatable[i], 0);
+ if (ret < 0)
+ break;
+ }
+
+ ret = mxl5005s_writereg(fe, addrtable[i], datatable[i], 1);
+
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 0);
+
+ return ret;
+}
+
+static int mxl5005s_init(struct dvb_frontend *fe)
+{
+ dprintk(1, "%s()\n", __func__);
+ return mxl5005s_reconfigure(fe, MXL_QAM, MXL5005S_BANDWIDTH_6MHZ);
+}
+
+static int mxl5005s_reconfigure(struct dvb_frontend *fe, u32 mod_type,
+ u32 bandwidth)
+{
+ struct mxl5005s_state *state = fe->tuner_priv;
+
+ u8 AddrTable[MXL5005S_REG_WRITING_TABLE_LEN_MAX];
+ u8 ByteTable[MXL5005S_REG_WRITING_TABLE_LEN_MAX];
+ int TableLen;
+
+ dprintk(1, "%s(type=%d, bw=%d)\n", __func__, mod_type, bandwidth);
+
+ mxl5005s_reset(fe);
+
+ /* Tuner initialization stage 0 */
+ MXL_GetMasterControl(ByteTable, MC_SYNTH_RESET);
+ AddrTable[0] = MASTER_CONTROL_ADDR;
+ ByteTable[0] |= state->config->AgcMasterByte;
+
+ mxl5005s_writeregs(fe, AddrTable, ByteTable, 1);
+
+ mxl5005s_AssignTunerMode(fe, mod_type, bandwidth);
+
+ /* Tuner initialization stage 1 */
+ MXL_GetInitRegister(fe, AddrTable, ByteTable, &TableLen);
+
+ mxl5005s_writeregs(fe, AddrTable, ByteTable, TableLen);
+
+ return 0;
+}
+
+static int mxl5005s_AssignTunerMode(struct dvb_frontend *fe, u32 mod_type,
+ u32 bandwidth)
+{
+ struct mxl5005s_state *state = fe->tuner_priv;
+ struct mxl5005s_config *c = state->config;
+
+ InitTunerControls(fe);
+
+ /* Set MxL5005S parameters. */
+ MXL5005_TunerConfig(
+ fe,
+ c->mod_mode,
+ c->if_mode,
+ bandwidth,
+ c->if_freq,
+ c->xtal_freq,
+ c->agc_mode,
+ c->top,
+ c->output_load,
+ c->clock_out,
+ c->div_out,
+ c->cap_select,
+ c->rssi_enable,
+ mod_type,
+ c->tracking_filter);
+
+ return 0;
+}
+
+static int mxl5005s_set_params(struct dvb_frontend *fe,
+ struct dvb_frontend_parameters *params)
+{
+ struct mxl5005s_state *state = fe->tuner_priv;
+ u32 req_mode, req_bw = 0;
+ int ret;
+
+ dprintk(1, "%s()\n", __func__);
+
+ if (fe->ops.info.type == FE_ATSC) {
+ switch (params->u.vsb.modulation) {
+ case VSB_8:
+ req_mode = MXL_ATSC; break;
+ default:
+ case QAM_64:
+ case QAM_256:
+ case QAM_AUTO:
+ req_mode = MXL_QAM; break;
+ }
+ } else
+ req_mode = MXL_DVBT;
+
+ /* Change tuner for new modulation type if reqd */
+ if (req_mode != state->current_mode) {
+ switch (req_mode) {
+ case VSB_8:
+ case QAM_64:
+ case QAM_256:
+ case QAM_AUTO:
+ req_bw = MXL5005S_BANDWIDTH_6MHZ;
+ break;
+ default:
+ /* Assume DVB-T */
+ switch (params->u.ofdm.bandwidth) {
+ case BANDWIDTH_6_MHZ:
+ req_bw = MXL5005S_BANDWIDTH_6MHZ;
+ break;
+ case BANDWIDTH_7_MHZ:
+ req_bw = MXL5005S_BANDWIDTH_7MHZ;
+ break;
+ case BANDWIDTH_AUTO:
+ case BANDWIDTH_8_MHZ:
+ req_bw = MXL5005S_BANDWIDTH_8MHZ;
+ break;
+ }
+ }
+
+ state->current_mode = req_mode;
+ ret = mxl5005s_reconfigure(fe, req_mode, req_bw);
+
+ } else
+ ret = 0;
+
+ if (ret == 0) {
+ dprintk(1, "%s() freq=%d\n", __func__, params->frequency);
+ ret = mxl5005s_SetRfFreqHz(fe, params->frequency);
+ }
+
+ return ret;
+}
+
+static int mxl5005s_get_frequency(struct dvb_frontend *fe, u32 *frequency)
+{
+ struct mxl5005s_state *state = fe->tuner_priv;
+ dprintk(1, "%s()\n", __func__);
+
+ *frequency = state->RF_IN;
+
+ return 0;
+}
+
+static int mxl5005s_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth)
+{
+ struct mxl5005s_state *state = fe->tuner_priv;
+ dprintk(1, "%s()\n", __func__);
+
+ *bandwidth = state->Chan_Bandwidth;
+
+ return 0;
+}
+
+static int mxl5005s_release(struct dvb_frontend *fe)
+{
+ dprintk(1, "%s()\n", __func__);
+ kfree(fe->tuner_priv);
+ fe->tuner_priv = NULL;
+ return 0;
+}
+
+static const struct dvb_tuner_ops mxl5005s_tuner_ops = {
+ .info = {
+ .name = "MaxLinear MXL5005S",
+ .frequency_min = 48000000,
+ .frequency_max = 860000000,
+ .frequency_step = 50000,
+ },
+
+ .release = mxl5005s_release,
+ .init = mxl5005s_init,
+
+ .set_params = mxl5005s_set_params,
+ .get_frequency = mxl5005s_get_frequency,
+ .get_bandwidth = mxl5005s_get_bandwidth,
+};
+
+struct dvb_frontend *mxl5005s_attach(struct dvb_frontend *fe,
+ struct i2c_adapter *i2c,
+ struct mxl5005s_config *config)
+{
+ struct mxl5005s_state *state = NULL;
+ dprintk(1, "%s()\n", __func__);
+
+ state = kzalloc(sizeof(struct mxl5005s_state), GFP_KERNEL);
+ if (state == NULL)
+ return NULL;
+
+ state->frontend = fe;
+ state->config = config;
+ state->i2c = i2c;
+ state->current_mode = MXL_QAM;
+
+ printk(KERN_INFO "MXL5005S: Attached at address 0x%02x\n",
+ config->i2c_address);
+
+ memcpy(&fe->ops.tuner_ops, &mxl5005s_tuner_ops,
+ sizeof(struct dvb_tuner_ops));
+
+ fe->tuner_priv = state;
+ return fe;
+}
+EXPORT_SYMBOL(mxl5005s_attach);
+
+MODULE_DESCRIPTION("MaxLinear MXL5005S silicon tuner driver");
+MODULE_AUTHOR("Steven Toth");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/common/tuners/mxl5005s.h b/drivers/media/common/tuners/mxl5005s.h
new file mode 100644
index 0000000..396db15
--- /dev/null
+++ b/drivers/media/common/tuners/mxl5005s.h
@@ -0,0 +1,131 @@
+/*
+ MaxLinear MXL5005S VSB/QAM/DVBT tuner driver
+
+ Copyright (C) 2008 MaxLinear
+ Copyright (C) 2008 Steven Toth <stoth@hauppauge.com>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+*/
+
+#ifndef __MXL5005S_H
+#define __MXL5005S_H
+
+#include <linux/i2c.h>
+#include "dvb_frontend.h"
+
+struct mxl5005s_config {
+
+ /* 7 bit i2c address */
+ u8 i2c_address;
+
+#define IF_FREQ_4570000HZ 4570000
+#define IF_FREQ_4571429HZ 4571429
+#define IF_FREQ_5380000HZ 5380000
+#define IF_FREQ_36000000HZ 36000000
+#define IF_FREQ_36125000HZ 36125000
+#define IF_FREQ_36166667HZ 36166667
+#define IF_FREQ_44000000HZ 44000000
+ u32 if_freq;
+
+#define CRYSTAL_FREQ_4000000HZ 4000000
+#define CRYSTAL_FREQ_16000000HZ 16000000
+#define CRYSTAL_FREQ_25000000HZ 25000000
+#define CRYSTAL_FREQ_28800000HZ 28800000
+ u32 xtal_freq;
+
+#define MXL_DUAL_AGC 0
+#define MXL_SINGLE_AGC 1
+ u8 agc_mode;
+
+#define MXL_TF_DEFAULT 0
+#define MXL_TF_OFF 1
+#define MXL_TF_C 2
+#define MXL_TF_C_H 3
+#define MXL_TF_D 4
+#define MXL_TF_D_L 5
+#define MXL_TF_E 6
+#define MXL_TF_F 7
+#define MXL_TF_E_2 8
+#define MXL_TF_E_NA 9
+#define MXL_TF_G 10
+ u8 tracking_filter;
+
+#define MXL_RSSI_DISABLE 0
+#define MXL_RSSI_ENABLE 1
+ u8 rssi_enable;
+
+#define MXL_CAP_SEL_DISABLE 0
+#define MXL_CAP_SEL_ENABLE 1
+ u8 cap_select;
+
+#define MXL_DIV_OUT_1 0
+#define MXL_DIV_OUT_4 1
+ u8 div_out;
+
+#define MXL_CLOCK_OUT_DISABLE 0
+#define MXL_CLOCK_OUT_ENABLE 1
+ u8 clock_out;
+
+#define MXL5005S_IF_OUTPUT_LOAD_200_OHM 200
+#define MXL5005S_IF_OUTPUT_LOAD_300_OHM 300
+ u32 output_load;
+
+#define MXL5005S_TOP_5P5 55
+#define MXL5005S_TOP_7P2 72
+#define MXL5005S_TOP_9P2 92
+#define MXL5005S_TOP_11P0 110
+#define MXL5005S_TOP_12P9 129
+#define MXL5005S_TOP_14P7 147
+#define MXL5005S_TOP_16P8 168
+#define MXL5005S_TOP_19P4 194
+#define MXL5005S_TOP_21P2 212
+#define MXL5005S_TOP_23P2 232
+#define MXL5005S_TOP_25P2 252
+#define MXL5005S_TOP_27P1 271
+#define MXL5005S_TOP_29P2 292
+#define MXL5005S_TOP_31P7 317
+#define MXL5005S_TOP_34P9 349
+ u32 top;
+
+#define MXL_ANALOG_MODE 0
+#define MXL_DIGITAL_MODE 1
+ u8 mod_mode;
+
+#define MXL_ZERO_IF 0
+#define MXL_LOW_IF 1
+ u8 if_mode;
+
+ /* Stuff I don't know what to do with */
+ u8 AgcMasterByte;
+};
+
+#if defined(CONFIG_MEDIA_TUNER_MXL5005S) || \
+ (defined(CONFIG_MEDIA_TUNER_MXL5005S_MODULE) && defined(MODULE))
+extern struct dvb_frontend *mxl5005s_attach(struct dvb_frontend *fe,
+ struct i2c_adapter *i2c,
+ struct mxl5005s_config *config);
+#else
+static inline struct dvb_frontend *mxl5005s_attach(struct dvb_frontend *fe,
+ struct i2c_adapter *i2c,
+ struct mxl5005s_config *config)
+{
+ printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+ return NULL;
+}
+#endif /* CONFIG_DVB_TUNER_MXL5005S */
+
+#endif /* __MXL5005S_H */
+
diff --git a/drivers/media/common/tuners/tda18271-common.c b/drivers/media/common/tuners/tda18271-common.c
index e27a762..f1894fe 100644
--- a/drivers/media/common/tuners/tda18271-common.c
+++ b/drivers/media/common/tuners/tda18271-common.c
@@ -227,9 +227,8 @@
regs[r_cp] &= ~0x20;
regs[r_cp] |= ((force & 1) << 5);
- tda18271_write_regs(fe, r_cp, 1);
- return 0;
+ return tda18271_write_regs(fe, r_cp, 1);
}
int tda18271_init_regs(struct dvb_frontend *fe)
@@ -487,16 +486,15 @@
struct tda18271_priv *priv = fe->tuner_priv;
unsigned char *regs = priv->tda18271_regs;
- tda_dbg("sm = %d, sm_lt = %d, sm_xt = %d\n", sm, sm_lt, sm_xt);
+ if (tda18271_debug & DBG_ADV)
+ tda_dbg("sm = %d, sm_lt = %d, sm_xt = %d\n", sm, sm_lt, sm_xt);
regs[R_EP3] &= ~0xe0; /* clear sm, sm_lt, sm_xt */
regs[R_EP3] |= sm ? (1 << 7) : 0 |
sm_lt ? (1 << 6) : 0 |
sm_xt ? (1 << 5) : 0;
- tda18271_write_regs(fe, R_EP3, 1);
-
- return 0;
+ return tda18271_write_regs(fe, R_EP3, 1);
}
/*---------------------------------------------------------------------*/
@@ -510,7 +508,7 @@
u32 div;
int ret = tda18271_lookup_pll_map(fe, MAIN_PLL, &freq, &pd, &d);
- if (ret < 0)
+ if (tda_fail(ret))
goto fail;
regs[R_MPD] = (0x77 & pd);
@@ -542,7 +540,7 @@
u32 div;
int ret = tda18271_lookup_pll_map(fe, CAL_PLL, &freq, &pd, &d);
- if (ret < 0)
+ if (tda_fail(ret))
goto fail;
regs[R_CPD] = pd;
@@ -566,7 +564,7 @@
u8 val;
int ret = tda18271_lookup_map(fe, BP_FILTER, freq, &val);
- if (ret < 0)
+ if (tda_fail(ret))
goto fail;
regs[R_EP1] &= ~0x07; /* clear bp filter bits */
@@ -583,7 +581,7 @@
u8 val;
int ret = tda18271_lookup_map(fe, RF_CAL_KMCO, freq, &val);
- if (ret < 0)
+ if (tda_fail(ret))
goto fail;
regs[R_EB13] &= ~0x7c; /* clear k & m bits */
@@ -600,7 +598,7 @@
u8 val;
int ret = tda18271_lookup_map(fe, RF_BAND, freq, &val);
- if (ret < 0)
+ if (tda_fail(ret))
goto fail;
regs[R_EP2] &= ~0xe0; /* clear rf band bits */
@@ -617,7 +615,7 @@
u8 val;
int ret = tda18271_lookup_map(fe, GAIN_TAPER, freq, &val);
- if (ret < 0)
+ if (tda_fail(ret))
goto fail;
regs[R_EP2] &= ~0x1f; /* clear gain taper bits */
@@ -634,7 +632,7 @@
u8 val;
int ret = tda18271_lookup_map(fe, IR_MEASURE, freq, &val);
- if (ret < 0)
+ if (tda_fail(ret))
goto fail;
regs[R_EP5] &= ~0x07;
@@ -650,11 +648,11 @@
unsigned char *regs = priv->tda18271_regs;
u8 val;
- tda18271_lookup_map(fe, RF_CAL, freq, &val);
+ int ret = tda18271_lookup_map(fe, RF_CAL, freq, &val);
regs[R_EB14] = val;
- return 0;
+ return ret;
}
/*
diff --git a/drivers/media/common/tuners/tda18271-fe.c b/drivers/media/common/tuners/tda18271-fe.c
index b262100..89c01fb 100644
--- a/drivers/media/common/tuners/tda18271-fe.c
+++ b/drivers/media/common/tuners/tda18271-fe.c
@@ -51,6 +51,7 @@
{
struct tda18271_priv *priv = fe->tuner_priv;
unsigned char *regs = priv->tda18271_regs;
+ int ret;
u32 N;
/* update TV broadcast parameters */
@@ -85,7 +86,9 @@
/* update rf top / if top */
regs[R_EB22] = 0x00;
regs[R_EB22] |= map->rfagc_top;
- tda18271_write_regs(fe, R_EB22, 1);
+ ret = tda18271_write_regs(fe, R_EB22, 1);
+ if (tda_fail(ret))
+ goto fail;
/* --------------------------------------------------------------- */
@@ -121,7 +124,9 @@
/* agc1 has priority on agc2 */
regs[R_EB1] &= ~0x01;
- tda18271_write_regs(fe, R_EB1, 1);
+ ret = tda18271_write_regs(fe, R_EB1, 1);
+ if (tda_fail(ret))
+ goto fail;
/* --------------------------------------------------------------- */
@@ -141,7 +146,9 @@
break;
}
- tda18271_write_regs(fe, R_TM, 7);
+ ret = tda18271_write_regs(fe, R_TM, 7);
+ if (tda_fail(ret))
+ goto fail;
/* force charge pump source */
charge_pump_source(fe, 1);
@@ -158,9 +165,9 @@
regs[R_EP3] &= ~0x04;
else
regs[R_EP3] |= 0x04;
- tda18271_write_regs(fe, R_EP3, 1);
-
- return 0;
+ ret = tda18271_write_regs(fe, R_EP3, 1);
+fail:
+ return ret;
}
static int tda18271_read_thermometer(struct dvb_frontend *fe)
@@ -213,11 +220,13 @@
struct tda18271_priv *priv = fe->tuner_priv;
struct tda18271_rf_tracking_filter_cal *map = priv->rf_cal_state;
unsigned char *regs = priv->tda18271_regs;
- int tm_current, rfcal_comp, approx, i;
+ int tm_current, rfcal_comp, approx, i, ret;
u8 dc_over_dt, rf_tab;
/* power up */
- tda18271_set_standby_mode(fe, 0, 0, 0);
+ ret = tda18271_set_standby_mode(fe, 0, 0, 0);
+ if (tda_fail(ret))
+ goto fail;
/* read die current temperature */
tm_current = tda18271_read_thermometer(fe);
@@ -228,8 +237,8 @@
rf_tab = regs[R_EB14];
i = tda18271_lookup_rf_band(fe, &freq, NULL);
- if (i < 0)
- return -EINVAL;
+ if (tda_fail(i))
+ return i;
if ((0 == map[i].rf3) || (freq / 1000 < map[i].rf2)) {
approx = map[i].rf_a1 *
@@ -250,35 +259,42 @@
rfcal_comp = dc_over_dt * (tm_current - priv->tm_rfcal);
regs[R_EB14] = approx + rfcal_comp;
- tda18271_write_regs(fe, R_EB14, 1);
-
- return 0;
+ ret = tda18271_write_regs(fe, R_EB14, 1);
+fail:
+ return ret;
}
static int tda18271_por(struct dvb_frontend *fe)
{
struct tda18271_priv *priv = fe->tuner_priv;
unsigned char *regs = priv->tda18271_regs;
+ int ret;
/* power up detector 1 */
regs[R_EB12] &= ~0x20;
- tda18271_write_regs(fe, R_EB12, 1);
+ ret = tda18271_write_regs(fe, R_EB12, 1);
+ if (tda_fail(ret))
+ goto fail;
regs[R_EB18] &= ~0x80; /* turn agc1 loop on */
regs[R_EB18] &= ~0x03; /* set agc1_gain to 6 dB */
- tda18271_write_regs(fe, R_EB18, 1);
+ ret = tda18271_write_regs(fe, R_EB18, 1);
+ if (tda_fail(ret))
+ goto fail;
regs[R_EB21] |= 0x03; /* set agc2_gain to -6 dB */
/* POR mode */
- tda18271_set_standby_mode(fe, 1, 0, 0);
+ ret = tda18271_set_standby_mode(fe, 1, 0, 0);
+ if (tda_fail(ret))
+ goto fail;
/* disable 1.5 MHz low pass filter */
regs[R_EB23] &= ~0x04; /* forcelp_fc2_en = 0 */
regs[R_EB23] &= ~0x02; /* XXX: lp_fc[2] = 0 */
- tda18271_write_regs(fe, R_EB21, 3);
-
- return 0;
+ ret = tda18271_write_regs(fe, R_EB21, 3);
+fail:
+ return ret;
}
static int tda18271_calibrate_rf(struct dvb_frontend *fe, u32 freq)
@@ -389,7 +405,7 @@
{
struct tda18271_priv *priv = fe->tuner_priv;
unsigned char *regs = priv->tda18271_regs;
- int sgn, bcal, count, wait;
+ int sgn, bcal, count, wait, ret;
u8 cid_target;
u16 count_limit;
u32 freq;
@@ -421,7 +437,9 @@
tda18271_write_regs(fe, R_EP2, 1);
/* read power detection info, stored in EB10 */
- tda18271_read_extended(fe);
+ ret = tda18271_read_extended(fe);
+ if (tda_fail(ret))
+ return ret;
/* algorithm initialization */
sgn = 1;
@@ -447,7 +465,9 @@
tda18271_write_regs(fe, R_EP2, 1);
/* read power detection info, stored in EB10 */
- tda18271_read_extended(fe);
+ ret = tda18271_read_extended(fe);
+ if (tda_fail(ret))
+ return ret;
count += 200;
@@ -478,6 +498,7 @@
{
struct tda18271_priv *priv = fe->tuner_priv;
unsigned char *regs = priv->tda18271_regs;
+ int ret;
/* set standard to digital */
regs[R_EP3] &= ~0x1f; /* clear std bits */
@@ -489,10 +510,14 @@
/* update IF output level & IF notch frequency */
regs[R_EP4] &= ~0x1c; /* clear if level bits */
- tda18271_write_regs(fe, R_EP3, 2);
+ ret = tda18271_write_regs(fe, R_EP3, 2);
+ if (tda_fail(ret))
+ goto fail;
regs[R_EB18] &= ~0x03; /* set agc1_gain to 6 dB */
- tda18271_write_regs(fe, R_EB18, 1);
+ ret = tda18271_write_regs(fe, R_EB18, 1);
+ if (tda_fail(ret))
+ goto fail;
regs[R_EB21] &= ~0x03; /* set agc2_gain to -15 dB */
@@ -500,9 +525,9 @@
regs[R_EB23] |= 0x04; /* forcelp_fc2_en = 1 */
regs[R_EB23] |= 0x02; /* lp_fc[2] = 1 */
- tda18271_write_regs(fe, R_EB21, 3);
-
- return 0;
+ ret = tda18271_write_regs(fe, R_EB21, 3);
+fail:
+ return ret;
}
static int tda18271_rf_tracking_filters_init(struct dvb_frontend *fe, u32 freq)
@@ -521,7 +546,7 @@
i = tda18271_lookup_rf_band(fe, &freq, NULL);
- if (i < 0)
+ if (tda_fail(i))
return i;
rf_default[RF1] = 1000 * map[i].rf1_def;
@@ -535,6 +560,8 @@
/* look for optimized calibration frequency */
bcal = tda18271_powerscan(fe, &rf_default[rf], &rf_freq[rf]);
+ if (tda_fail(bcal))
+ return bcal;
tda18271_calc_rf_cal(fe, &rf_freq[rf]);
prog_tab[rf] = regs[R_EB14];
@@ -575,22 +602,29 @@
{
struct tda18271_priv *priv = fe->tuner_priv;
unsigned int i;
+ int ret;
tda_info("tda18271: performing RF tracking filter calibration\n");
/* wait for die temperature stabilization */
msleep(200);
- tda18271_powerscan_init(fe);
+ ret = tda18271_powerscan_init(fe);
+ if (tda_fail(ret))
+ goto fail;
/* rf band calibration */
- for (i = 0; priv->rf_cal_state[i].rfmax != 0; i++)
+ for (i = 0; priv->rf_cal_state[i].rfmax != 0; i++) {
+ ret =
tda18271_rf_tracking_filters_init(fe, 1000 *
priv->rf_cal_state[i].rfmax);
+ if (tda_fail(ret))
+ goto fail;
+ }
priv->tm_rfcal = tda18271_read_thermometer(fe);
-
- return 0;
+fail:
+ return ret;
}
/* ------------------------------------------------------------------ */
@@ -599,6 +633,7 @@
{
struct tda18271_priv *priv = fe->tuner_priv;
unsigned char *regs = priv->tda18271_regs;
+ int ret;
/* test RF_CAL_OK to see if we need init */
if ((regs[R_EP1] & 0x10) == 0)
@@ -607,15 +642,22 @@
if (priv->cal_initialized)
return 0;
- tda18271_calc_rf_filter_curve(fe);
+ ret = tda18271_calc_rf_filter_curve(fe);
+ if (tda_fail(ret))
+ goto fail;
- tda18271_por(fe);
+ ret = tda18271_por(fe);
+ if (tda_fail(ret))
+ goto fail;
tda_info("tda18271: RF tracking filter calibration complete\n");
priv->cal_initialized = true;
-
- return 0;
+ goto end;
+fail:
+ tda_info("tda18271: RF tracking filter calibration failed!\n");
+end:
+ return ret;
}
static int tda18271c1_rf_tracking_filter_calibration(struct dvb_frontend *fe,
@@ -623,6 +665,7 @@
{
struct tda18271_priv *priv = fe->tuner_priv;
unsigned char *regs = priv->tda18271_regs;
+ int ret;
u32 N = 0;
/* calculate bp filter */
@@ -671,7 +714,10 @@
tda18271_calc_main_pll(fe, N);
- tda18271_write_regs(fe, R_EP3, 11);
+ ret = tda18271_write_regs(fe, R_EP3, 11);
+ if (tda_fail(ret))
+ return ret;
+
msleep(5); /* RF tracking filter calibration initialization */
/* search for K,M,CO for RF calibration */
@@ -719,45 +765,56 @@
{
struct tda18271_priv *priv = fe->tuner_priv;
unsigned char *regs = priv->tda18271_regs;
+ int ret;
- tda18271_read_regs(fe);
+ ret = tda18271_read_regs(fe);
+ if (tda_fail(ret))
+ goto fail;
/* test IR_CAL_OK to see if we need init */
if ((regs[R_EP1] & 0x08) == 0)
- tda18271_init_regs(fe);
-
- return 0;
+ ret = tda18271_init_regs(fe);
+fail:
+ return ret;
}
static int tda18271_init(struct dvb_frontend *fe)
{
struct tda18271_priv *priv = fe->tuner_priv;
+ int ret;
mutex_lock(&priv->lock);
/* power up */
- tda18271_set_standby_mode(fe, 0, 0, 0);
+ ret = tda18271_set_standby_mode(fe, 0, 0, 0);
+ if (tda_fail(ret))
+ goto fail;
/* initialization */
- tda18271_ir_cal_init(fe);
+ ret = tda18271_ir_cal_init(fe);
+ if (tda_fail(ret))
+ goto fail;
if (priv->id == TDA18271HDC2)
tda18271c2_rf_cal_init(fe);
-
+fail:
mutex_unlock(&priv->lock);
- return 0;
+ return ret;
}
static int tda18271_tune(struct dvb_frontend *fe,
struct tda18271_std_map_item *map, u32 freq, u32 bw)
{
struct tda18271_priv *priv = fe->tuner_priv;
+ int ret;
tda_dbg("freq = %d, ifc = %d, bw = %d, agc_mode = %d, std = %d\n",
freq, map->if_freq, bw, map->agc_mode, map->std);
- tda18271_init(fe);
+ ret = tda18271_init(fe);
+ if (tda_fail(ret))
+ goto fail;
mutex_lock(&priv->lock);
@@ -769,11 +826,11 @@
tda18271c2_rf_tracking_filters_correction(fe, freq);
break;
}
- tda18271_channel_configuration(fe, map, freq, bw);
+ ret = tda18271_channel_configuration(fe, map, freq, bw);
mutex_unlock(&priv->lock);
-
- return 0;
+fail:
+ return ret;
}
/* ------------------------------------------------------------------ */
@@ -837,7 +894,7 @@
ret = tda18271_tune(fe, map, freq, bw);
- if (ret < 0)
+ if (tda_fail(ret))
goto fail;
priv->frequency = freq;
@@ -893,7 +950,7 @@
ret = tda18271_tune(fe, map, freq, 0);
- if (ret < 0)
+ if (tda_fail(ret))
goto fail;
priv->frequency = freq;
@@ -905,16 +962,17 @@
static int tda18271_sleep(struct dvb_frontend *fe)
{
struct tda18271_priv *priv = fe->tuner_priv;
+ int ret;
mutex_lock(&priv->lock);
/* standby mode w/ slave tuner output
* & loop thru & xtal oscillator on */
- tda18271_set_standby_mode(fe, 1, 0, 0);
+ ret = tda18271_set_standby_mode(fe, 1, 0, 0);
mutex_unlock(&priv->lock);
- return 0;
+ return ret;
}
static int tda18271_release(struct dvb_frontend *fe)
@@ -1095,10 +1153,10 @@
if (cfg)
priv->small_i2c = cfg->small_i2c;
- if (tda18271_get_id(fe) < 0)
+ if (tda_fail(tda18271_get_id(fe)))
goto fail;
- if (tda18271_assign_map_layout(fe) < 0)
+ if (tda_fail(tda18271_assign_map_layout(fe)))
goto fail;
mutex_lock(&priv->lock);
diff --git a/drivers/media/common/tuners/tda18271-priv.h b/drivers/media/common/tuners/tda18271-priv.h
index 2bc5eb3..81a7393 100644
--- a/drivers/media/common/tuners/tda18271-priv.h
+++ b/drivers/media/common/tuners/tda18271-priv.h
@@ -153,6 +153,15 @@
#define tda_reg(fmt, arg...) dprintk(KERN_DEBUG, DBG_REG, fmt, ##arg)
#define tda_cal(fmt, arg...) dprintk(KERN_DEBUG, DBG_CAL, fmt, ##arg)
+#define tda_fail(ret) \
+({ \
+ int __ret; \
+ __ret = (ret < 0); \
+ if (__ret) \
+ tda_printk(KERN_ERR, "error %d on line %d\n", ret, __LINE__);\
+ __ret; \
+})
+
/*---------------------------------------------------------------------*/
enum tda18271_map_type {
diff --git a/drivers/media/common/tuners/tda827x.c b/drivers/media/common/tuners/tda827x.c
index d30d2c9..8555d9c 100644
--- a/drivers/media/common/tuners/tda827x.c
+++ b/drivers/media/common/tuners/tda827x.c
@@ -418,13 +418,13 @@
unsigned char buf[] = {0x22, 0x01};
int arg;
int gp_func;
- struct i2c_msg msg = { .addr = priv->cfg->switch_addr, .flags = 0,
- .buf = buf, .len = sizeof(buf) };
+ struct i2c_msg msg = { .flags = 0, .buf = buf, .len = sizeof(buf) };
if (NULL == priv->cfg) {
dprintk("tda827x_config not defined, cannot set LNA gain!\n");
return;
}
+ msg.addr = priv->cfg->switch_addr;
if (priv->cfg->config) {
if (high)
dprintk("setting LNA to high gain\n");
diff --git a/drivers/media/common/tuners/tea5761.c b/drivers/media/common/tuners/tea5761.c
index b93cdef..b23dade 100644
--- a/drivers/media/common/tuners/tea5761.c
+++ b/drivers/media/common/tuners/tea5761.c
@@ -295,7 +295,7 @@
{
struct tea5761_priv *priv = NULL;
- if (tea5761_autodetection(i2c_adap, i2c_addr) == EINVAL)
+ if (tea5761_autodetection(i2c_adap, i2c_addr) != 0)
return NULL;
priv = kzalloc(sizeof(struct tea5761_priv), GFP_KERNEL);
diff --git a/drivers/media/common/tuners/tea5767.c b/drivers/media/common/tuners/tea5767.c
index f6e7d7a..1f56463 100644
--- a/drivers/media/common/tuners/tea5767.c
+++ b/drivers/media/common/tuners/tea5767.c
@@ -373,14 +373,14 @@
if ((rc = tuner_i2c_xfer_recv(&i2c, buffer, 7))< 5) {
printk(KERN_WARNING "It is not a TEA5767. Received %i bytes.\n", rc);
- return EINVAL;
+ return -EINVAL;
}
/* If all bytes are the same then it's a TV tuner and not a tea5767 */
if (buffer[0] == buffer[1] && buffer[0] == buffer[2] &&
buffer[0] == buffer[3] && buffer[0] == buffer[4]) {
printk(KERN_WARNING "All bytes are equal. It is not a TEA5767\n");
- return EINVAL;
+ return -EINVAL;
}
/* Status bytes:
@@ -390,7 +390,7 @@
*/
if (((buffer[3] & 0x0f) != 0x00) || (buffer[4] != 0x00)) {
printk(KERN_WARNING "Chip ID is not zero. It is not a TEA5767\n");
- return EINVAL;
+ return -EINVAL;
}
diff --git a/drivers/media/common/tuners/tuner-i2c.h b/drivers/media/common/tuners/tuner-i2c.h
index 3ad6c8e..cb1c714 100644
--- a/drivers/media/common/tuners/tuner-i2c.h
+++ b/drivers/media/common/tuners/tuner-i2c.h
@@ -170,4 +170,12 @@
__ret; \
})
+#define hybrid_tuner_report_instance_count(state) \
+({ \
+ int __ret = 0; \
+ if (state) \
+ __ret = state->i2c_props.count; \
+ __ret; \
+})
+
#endif /* __TUNER_I2C_H__ */
diff --git a/drivers/media/common/tuners/tuner-simple.c b/drivers/media/common/tuners/tuner-simple.c
index be8d903..266c255 100644
--- a/drivers/media/common/tuners/tuner-simple.c
+++ b/drivers/media/common/tuners/tuner-simple.c
@@ -1018,8 +1018,10 @@
fe->ops.i2c_gate_ctrl(fe, 1);
if (1 != i2c_transfer(i2c_adap, &msg, 1))
- tuner_warn("unable to probe %s, proceeding anyway.",
- tuners[type].name);
+ printk(KERN_WARNING "tuner-simple %d-%04x: "
+ "unable to probe %s, proceeding anyway.",
+ i2c_adapter_id(i2c_adap), i2c_addr,
+ tuners[type].name);
if (fe->ops.i2c_gate_ctrl)
fe->ops.i2c_gate_ctrl(fe, 0);
diff --git a/drivers/media/common/tuners/tuner-xc2028.c b/drivers/media/common/tuners/tuner-xc2028.c
index 9e9003c..0cbde17 100644
--- a/drivers/media/common/tuners/tuner-xc2028.c
+++ b/drivers/media/common/tuners/tuner-xc2028.c
@@ -46,7 +46,7 @@
MODULE_PARM_DESC(firmware_name, "Firmware file name. Allows overriding the "
"default firmware name\n");
-static LIST_HEAD(xc2028_list);
+static LIST_HEAD(hybrid_tuner_instance_list);
static DEFINE_MUTEX(xc2028_list_mutex);
/* struct for storing firmware table */
@@ -68,12 +68,11 @@
};
struct xc2028_data {
- struct list_head xc2028_list;
+ struct list_head hybrid_tuner_instance_list;
struct tuner_i2c_props i2c_props;
int (*tuner_callback) (void *dev,
int command, int arg);
void *video_dev;
- int count;
__u32 frequency;
struct firmware_description *firm;
@@ -1072,20 +1071,19 @@
mutex_lock(&xc2028_list_mutex);
- priv->count--;
-
- if (!priv->count) {
- list_del(&priv->xc2028_list);
-
+ /* only perform final cleanup if this is the last instance */
+ if (hybrid_tuner_report_instance_count(priv) == 1) {
kfree(priv->ctrl.fname);
-
free_firmware(priv);
- kfree(priv);
- fe->tuner_priv = NULL;
}
+ if (priv)
+ hybrid_tuner_release_state(priv);
+
mutex_unlock(&xc2028_list_mutex);
+ fe->tuner_priv = NULL;
+
return 0;
}
@@ -1150,7 +1148,7 @@
struct xc2028_config *cfg)
{
struct xc2028_data *priv;
- void *video_dev;
+ int instance;
if (debug)
printk(KERN_DEBUG "xc2028: Xcv2028/3028 init called!\n");
@@ -1163,49 +1161,41 @@
return NULL;
}
- video_dev = cfg->i2c_adap->algo_data;
-
- if (debug)
- printk(KERN_DEBUG "xc2028: video_dev =%p\n", video_dev);
-
mutex_lock(&xc2028_list_mutex);
- list_for_each_entry(priv, &xc2028_list, xc2028_list) {
- if (&priv->i2c_props.adap->dev == &cfg->i2c_adap->dev) {
- video_dev = NULL;
- if (debug)
- printk(KERN_DEBUG "xc2028: reusing device\n");
-
- break;
- }
- }
-
- if (video_dev) {
- priv = kzalloc(sizeof(*priv), GFP_KERNEL);
- if (priv == NULL) {
- mutex_unlock(&xc2028_list_mutex);
- return NULL;
- }
-
- priv->i2c_props.addr = cfg->i2c_addr;
- priv->i2c_props.adap = cfg->i2c_adap;
- priv->i2c_props.name = "xc2028";
-
- priv->video_dev = video_dev;
+ instance = hybrid_tuner_request_state(struct xc2028_data, priv,
+ hybrid_tuner_instance_list,
+ cfg->i2c_adap, cfg->i2c_addr,
+ "xc2028");
+ switch (instance) {
+ case 0:
+ /* memory allocation failure */
+ goto fail;
+ break;
+ case 1:
+ /* new tuner instance */
priv->tuner_callback = cfg->callback;
priv->ctrl.max_len = 13;
mutex_init(&priv->lock);
- list_add_tail(&priv->xc2028_list, &xc2028_list);
+ /* analog side (tuner-core) uses i2c_adap->algo_data.
+ * digital side is not guaranteed to have algo_data defined.
+ *
+ * digital side will always have fe->dvb defined.
+ * analog side (tuner-core) doesn't (yet) define fe->dvb.
+ */
+ priv->video_dev = ((fe->dvb) && (fe->dvb->priv)) ?
+ fe->dvb->priv : cfg->i2c_adap->algo_data;
+
+ fe->tuner_priv = priv;
+ break;
+ case 2:
+ /* existing tuner instance */
+ fe->tuner_priv = priv;
+ break;
}
- fe->tuner_priv = priv;
- priv->count++;
-
- if (debug)
- printk(KERN_DEBUG "xc2028: usage count is %i\n", priv->count);
-
memcpy(&fe->ops.tuner_ops, &xc2028_dvb_tuner_ops,
sizeof(xc2028_dvb_tuner_ops));
@@ -1217,6 +1207,11 @@
mutex_unlock(&xc2028_list_mutex);
return fe;
+fail:
+ mutex_unlock(&xc2028_list_mutex);
+
+ xc2028_dvb_release(fe);
+ return NULL;
}
EXPORT_SYMBOL(xc2028_attach);
diff --git a/drivers/media/common/tuners/xc5000.c b/drivers/media/common/tuners/xc5000.c
index 43d35bd..ceae6db 100644
--- a/drivers/media/common/tuners/xc5000.c
+++ b/drivers/media/common/tuners/xc5000.c
@@ -212,7 +212,7 @@
dprintk(1, "%s()\n", __func__);
if (priv->cfg->tuner_callback) {
- ret = priv->cfg->tuner_callback(priv->cfg->priv,
+ ret = priv->cfg->tuner_callback(priv->devptr,
XC5000_TUNER_RESET, 0);
if (ret)
printk(KERN_ERR "xc5000: reset failed\n");
@@ -900,9 +900,9 @@
.get_status = xc5000_get_status
};
-struct dvb_frontend * xc5000_attach(struct dvb_frontend *fe,
- struct i2c_adapter *i2c,
- struct xc5000_config *cfg)
+struct dvb_frontend *xc5000_attach(struct dvb_frontend *fe,
+ struct i2c_adapter *i2c,
+ struct xc5000_config *cfg, void *devptr)
{
struct xc5000_priv *priv = NULL;
u16 id = 0;
@@ -916,6 +916,7 @@
priv->cfg = cfg;
priv->bandwidth = BANDWIDTH_6_MHZ;
priv->i2c = i2c;
+ priv->devptr = devptr;
/* Check if firmware has been loaded. It is possible that another
instance of the driver has loaded the firmware.
diff --git a/drivers/media/common/tuners/xc5000.h b/drivers/media/common/tuners/xc5000.h
index 0ee80f9..c910715 100644
--- a/drivers/media/common/tuners/xc5000.h
+++ b/drivers/media/common/tuners/xc5000.h
@@ -31,29 +31,31 @@
u8 i2c_address;
u32 if_khz;
- /* For each bridge framework, when it attaches either analog or digital,
- * it has to store a reference back to its _core equivalent structure,
- * so that it can service the hardware by steering gpio's etc.
- * Each bridge implementation is different so cast priv accordingly.
- * The xc5000 driver cares not for this value, other than ensuring
- * it's passed back to a bridge during tuner_callback().
- */
- void *priv;
int (*tuner_callback) (void *priv, int command, int arg);
};
/* xc5000 callback command */
#define XC5000_TUNER_RESET 0
+/* For each bridge framework, when it attaches either analog or digital,
+ * it has to store a reference back to its _core equivalent structure,
+ * so that it can service the hardware by steering gpio's etc.
+ * Each bridge implementation is different so cast devptr accordingly.
+ * The xc5000 driver cares not for this value, other than ensuring
+ * it's passed back to a bridge during tuner_callback().
+ */
+
#if defined(CONFIG_MEDIA_TUNER_XC5000) || \
(defined(CONFIG_MEDIA_TUNER_XC5000_MODULE) && defined(MODULE))
extern struct dvb_frontend* xc5000_attach(struct dvb_frontend *fe,
struct i2c_adapter *i2c,
- struct xc5000_config *cfg);
+ struct xc5000_config *cfg,
+ void *devptr);
#else
static inline struct dvb_frontend* xc5000_attach(struct dvb_frontend *fe,
struct i2c_adapter *i2c,
- struct xc5000_config *cfg)
+ struct xc5000_config *cfg,
+ void *devptr)
{
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
return NULL;
diff --git a/drivers/media/common/tuners/xc5000_priv.h b/drivers/media/common/tuners/xc5000_priv.h
index 13b2d19..ecebfe4 100644
--- a/drivers/media/common/tuners/xc5000_priv.h
+++ b/drivers/media/common/tuners/xc5000_priv.h
@@ -31,6 +31,8 @@
u8 video_standard;
u8 rf_mode;
u8 fwloaded;
+
+ void *devptr;
};
#endif
diff --git a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
index 7b0ea3b..f9d0876 100644
--- a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
+++ b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
@@ -634,7 +634,7 @@
}
/* try the sky v2.3 (vp310/Samsung tbdu18132(tsa5059)) */
- fc->fe = dvb_attach(vp310_mt312_attach,
+ fc->fe = dvb_attach(mt312_attach,
&skystar23_samsung_tbdu18132_config, i2c);
if (fc->fe != NULL) {
ops = &fc->fe->ops;
diff --git a/drivers/media/dvb/b2c2/flexcop-usb.c b/drivers/media/dvb/b2c2/flexcop-usb.c
index 449fb5c..ae0d76a 100644
--- a/drivers/media/dvb/b2c2/flexcop-usb.c
+++ b/drivers/media/dvb/b2c2/flexcop-usb.c
@@ -379,7 +379,7 @@
static int flexcop_usb_transfer_init(struct flexcop_usb *fc_usb)
{
- u16 frame_size = fc_usb->uintf->cur_altsetting->endpoint[0].desc.wMaxPacketSize;
+ u16 frame_size = le16_to_cpu(fc_usb->uintf->cur_altsetting->endpoint[0].desc.wMaxPacketSize);
int bufsize = B2C2_USB_NUM_ISO_URB * B2C2_USB_FRAMES_PER_ISO * frame_size,i,j,ret;
int buffer_offset = 0;
diff --git a/drivers/media/dvb/bt8xx/Kconfig b/drivers/media/dvb/bt8xx/Kconfig
index d1239b8..7588db1 100644
--- a/drivers/media/dvb/bt8xx/Kconfig
+++ b/drivers/media/dvb/bt8xx/Kconfig
@@ -1,6 +1,7 @@
config DVB_BT8XX
tristate "BT8xx based PCI cards"
depends on DVB_CORE && PCI && I2C && VIDEO_BT848
+ depends on HOTPLUG # due to FW_LOADER
select DVB_MT352 if !DVB_FE_CUSTOMISE
select DVB_SP887X if !DVB_FE_CUSTOMISE
select DVB_NXT6000 if !DVB_FE_CUSTOMISE
diff --git a/drivers/media/dvb/cinergyT2/Kconfig b/drivers/media/dvb/cinergyT2/Kconfig
index 3d778c5..c03513b 100644
--- a/drivers/media/dvb/cinergyT2/Kconfig
+++ b/drivers/media/dvb/cinergyT2/Kconfig
@@ -1,6 +1,6 @@
config DVB_CINERGYT2
tristate "Terratec CinergyT2/qanu USB2 DVB-T receiver"
- depends on DVB_CORE && USB
+ depends on DVB_CORE && USB && INPUT
help
Support for "TerraTec CinergyT2" USB2.0 Highspeed DVB Receivers
diff --git a/drivers/media/dvb/cinergyT2/cinergyT2.c b/drivers/media/dvb/cinergyT2/cinergyT2.c
index f5010e8..a824f37 100644
--- a/drivers/media/dvb/cinergyT2/cinergyT2.c
+++ b/drivers/media/dvb/cinergyT2/cinergyT2.c
@@ -82,22 +82,22 @@
struct dvbt_set_parameters_msg {
uint8_t cmd;
- uint32_t freq;
+ __le32 freq;
uint8_t bandwidth;
- uint16_t tps;
+ __le16 tps;
uint8_t flags;
} __attribute__((packed));
struct dvbt_get_status_msg {
- uint32_t freq;
+ __le32 freq;
uint8_t bandwidth;
- uint16_t tps;
+ __le16 tps;
uint8_t flags;
- uint16_t gain;
+ __le16 gain;
uint8_t snr;
- uint32_t viterbi_error_rate;
- uint32_t rs_error_rate;
- uint32_t uncorrected_block_count;
+ __le32 viterbi_error_rate;
+ __le32 rs_error_rate;
+ __le32 uncorrected_block_count;
uint8_t lock_bits;
uint8_t prev_lock_bits;
} __attribute__((packed));
@@ -136,6 +136,7 @@
wait_queue_head_t poll_wq;
int pending_fe_events;
int disconnect_pending;
+ unsigned int uncorrected_block_count;
atomic_t inuse;
void *streambuf;
@@ -147,7 +148,7 @@
char phys[64];
struct delayed_work rc_query_work;
int rc_input_event;
- u32 rc_last_code;
+ __le32 rc_last_code;
unsigned long last_event_jiffies;
#endif
};
@@ -160,7 +161,7 @@
struct cinergyt2_rc_event {
char type;
- uint32_t value;
+ __le32 value;
} __attribute__((packed));
static const uint32_t rc_keys[] = {
@@ -619,8 +620,11 @@
{
uint32_t unc_count;
- unc_count = stat->uncorrected_block_count;
- stat->uncorrected_block_count = 0;
+ if (mutex_lock_interruptible(&cinergyt2->sem))
+ return -ERESTARTSYS;
+ unc_count = cinergyt2->uncorrected_block_count;
+ cinergyt2->uncorrected_block_count = 0;
+ mutex_unlock(&cinergyt2->sem);
/* UNC are already converted to host byte order... */
return put_user(unc_count,(__u32 __user *) arg);
@@ -769,7 +773,7 @@
input_sync(cinergyt2->rc_input_dev);
cinergyt2->rc_input_event = KEY_MAX;
}
- cinergyt2->rc_last_code = ~0;
+ cinergyt2->rc_last_code = cpu_to_le32(~0);
}
goto out;
}
@@ -780,7 +784,7 @@
n, le32_to_cpu(rc_events[n].value), rc_events[n].type);
if (rc_events[n].type == CINERGYT2_RC_EVENT_TYPE_NEC &&
- rc_events[n].value == ~0) {
+ rc_events[n].value == cpu_to_le32(~0)) {
/* keyrepeat bit -> just repeat last rc_input_event */
} else {
cinergyt2->rc_input_event = KEY_MAX;
@@ -795,7 +799,7 @@
if (cinergyt2->rc_input_event != KEY_MAX) {
if (rc_events[n].value == cinergyt2->rc_last_code &&
- cinergyt2->rc_last_code != ~0) {
+ cinergyt2->rc_last_code != cpu_to_le32(~0)) {
/* emit a key-up so the double event is recognized */
dprintk(1, "rc_input_event=%d UP\n", cinergyt2->rc_input_event);
input_report_key(cinergyt2->rc_input_dev,
@@ -829,7 +833,7 @@
usb_make_path(cinergyt2->udev, cinergyt2->phys, sizeof(cinergyt2->phys));
strlcat(cinergyt2->phys, "/input0", sizeof(cinergyt2->phys));
cinergyt2->rc_input_event = KEY_MAX;
- cinergyt2->rc_last_code = ~0;
+ cinergyt2->rc_last_code = cpu_to_le32(~0);
INIT_DELAYED_WORK(&cinergyt2->rc_query_work, cinergyt2_query_rc);
input_dev->name = DRIVER_NAME " remote control";
@@ -840,8 +844,8 @@
input_dev->keycodesize = 0;
input_dev->keycodemax = 0;
input_dev->id.bustype = BUS_USB;
- input_dev->id.vendor = cinergyt2->udev->descriptor.idVendor;
- input_dev->id.product = cinergyt2->udev->descriptor.idProduct;
+ input_dev->id.vendor = le16_to_cpu(cinergyt2->udev->descriptor.idVendor);
+ input_dev->id.product = le16_to_cpu(cinergyt2->udev->descriptor.idProduct);
input_dev->id.version = 1;
input_dev->dev.parent = &cinergyt2->udev->dev;
@@ -889,18 +893,16 @@
char cmd [] = { CINERGYT2_EP1_GET_TUNER_STATUS };
struct dvbt_get_status_msg *s = &cinergyt2->status;
uint8_t lock_bits;
- uint32_t unc;
if (cinergyt2->disconnect_pending || mutex_lock_interruptible(&cinergyt2->sem))
return;
- unc = s->uncorrected_block_count;
lock_bits = s->lock_bits;
cinergyt2_command(cinergyt2, cmd, sizeof(cmd), (char *) s, sizeof(*s));
- unc += le32_to_cpu(s->uncorrected_block_count);
- s->uncorrected_block_count = unc;
+ cinergyt2->uncorrected_block_count +=
+ le32_to_cpu(s->uncorrected_block_count);
if (lock_bits != s->lock_bits) {
wake_up_interruptible(&cinergyt2->poll_wq);
diff --git a/drivers/media/dvb/dvb-core/dvb_ca_en50221.c b/drivers/media/dvb/dvb-core/dvb_ca_en50221.c
index 8cbdb0e..588fbe1 100644
--- a/drivers/media/dvb/dvb-core/dvb_ca_en50221.c
+++ b/drivers/media/dvb/dvb-core/dvb_ca_en50221.c
@@ -910,15 +910,21 @@
int curdelay = 100000000;
int slot;
+ /* Beware of too high polling frequency, because one polling
+ * call might take several hundred milliseconds until timeout!
+ */
for (slot = 0; slot < ca->slot_count; slot++) {
switch (ca->slot_info[slot].slot_state) {
default:
case DVB_CA_SLOTSTATE_NONE:
+ delay = HZ * 60; /* 60s */
+ if (!(ca->flags & DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE))
+ delay = HZ * 5; /* 5s */
+ break;
case DVB_CA_SLOTSTATE_INVALID:
- delay = HZ * 60;
- if (!(ca->flags & DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE)) {
- delay = HZ / 10;
- }
+ delay = HZ * 60; /* 60s */
+ if (!(ca->flags & DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE))
+ delay = HZ / 10; /* 100ms */
break;
case DVB_CA_SLOTSTATE_UNINITIALISED:
@@ -926,19 +932,17 @@
case DVB_CA_SLOTSTATE_VALIDATE:
case DVB_CA_SLOTSTATE_WAITFR:
case DVB_CA_SLOTSTATE_LINKINIT:
- delay = HZ / 10;
+ delay = HZ / 10; /* 100ms */
break;
case DVB_CA_SLOTSTATE_RUNNING:
- delay = HZ * 60;
- if (!(ca->flags & DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE)) {
- delay = HZ / 10;
- }
+ delay = HZ * 60; /* 60s */
+ if (!(ca->flags & DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE))
+ delay = HZ / 10; /* 100ms */
if (ca->open) {
if ((!ca->slot_info[slot].da_irq_supported) ||
- (!(ca->flags & DVB_CA_EN50221_FLAG_IRQ_DA))) {
- delay = HZ / 10;
- }
+ (!(ca->flags & DVB_CA_EN50221_FLAG_IRQ_DA)))
+ delay = HZ / 10; /* 100ms */
}
break;
}
diff --git a/drivers/media/dvb/dvb-core/dvb_net.c b/drivers/media/dvb/dvb-core/dvb_net.c
index 56d871c..c2334ae 100644
--- a/drivers/media/dvb/dvb-core/dvb_net.c
+++ b/drivers/media/dvb/dvb-core/dvb_net.c
@@ -168,7 +168,7 @@
* stolen from eth.c out of the linux kernel, hacked for dvb-device
* by Michael Holzt <kju@debian.org>
*/
-static unsigned short dvb_net_eth_type_trans(struct sk_buff *skb,
+static __be16 dvb_net_eth_type_trans(struct sk_buff *skb,
struct net_device *dev)
{
struct ethhdr *eth;
@@ -277,10 +277,10 @@
if(ext_len >= 0) {
p->ule_next_hdr += ext_len;
if (!p->ule_bridged) {
- p->ule_sndu_type = ntohs(*(unsigned short *)p->ule_next_hdr);
+ p->ule_sndu_type = ntohs(*(__be16 *)p->ule_next_hdr);
p->ule_next_hdr += 2;
} else {
- p->ule_sndu_type = ntohs(*(unsigned short *)(p->ule_next_hdr + ((p->ule_dbit ? 2 : 3) * ETH_ALEN)));
+ p->ule_sndu_type = ntohs(*(__be16 *)(p->ule_next_hdr + ((p->ule_dbit ? 2 : 3) * ETH_ALEN)));
/* This assures the extension handling loop will terminate. */
}
}
@@ -294,7 +294,7 @@
if (ule_optional_ext_handlers[htype])
(void)ule_optional_ext_handlers[htype]( p );
p->ule_next_hdr += ext_len;
- p->ule_sndu_type = ntohs( *(unsigned short *)(p->ule_next_hdr-2) );
+ p->ule_sndu_type = ntohs( *(__be16 *)(p->ule_next_hdr-2) );
/*
* note: the length of the next header type is included in the
* length of THIS optional extension header
@@ -594,8 +594,8 @@
/* Check for complete payload. */
if (priv->ule_sndu_remain <= 0) {
/* Check CRC32, we've got it in our skb already. */
- unsigned short ulen = htons(priv->ule_sndu_len);
- unsigned short utype = htons(priv->ule_sndu_type);
+ __be16 ulen = htons(priv->ule_sndu_len);
+ __be16 utype = htons(priv->ule_sndu_type);
const u8 *tail;
struct kvec iov[3] = {
{ &ulen, sizeof ulen },
diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig
index 4c1cff9..f00a0eb 100644
--- a/drivers/media/dvb/dvb-usb/Kconfig
+++ b/drivers/media/dvb/dvb-usb/Kconfig
@@ -1,6 +1,7 @@
config DVB_USB
tristate "Support for various USB DVB devices"
- depends on DVB_CORE && USB && I2C
+ depends on DVB_CORE && USB && I2C && INPUT
+ depends on HOTPLUG # due to FW_LOADER
select FW_LOADER
help
By enabling this you will be able to choose the various supported
diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c
index 3462238..c4d40fe 100644
--- a/drivers/media/dvb/dvb-usb/dib0700_devices.c
+++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c
@@ -111,8 +111,8 @@
struct i2c_adapter *tun_i2c = dib3000mc_get_tuner_i2c_master(adap->fe, 1);
s8 a;
int if1=1220;
- if (adap->dev->udev->descriptor.idVendor == USB_VID_HAUPPAUGE &&
- adap->dev->udev->descriptor.idProduct == USB_PID_HAUPPAUGE_NOVA_T_500_2) {
+ if (adap->dev->udev->descriptor.idVendor == cpu_to_le16(USB_VID_HAUPPAUGE) &&
+ adap->dev->udev->descriptor.idProduct == cpu_to_le16(USB_PID_HAUPPAUGE_NOVA_T_500_2)) {
if (!eeprom_read(prim_i2c,0x59 + adap->id,&a)) if1=1220+a;
}
return dvb_attach(mt2060_attach,adap->fe, tun_i2c,&bristol_mt2060_config[adap->id],
@@ -402,8 +402,8 @@
{
struct usb_device_descriptor *desc = &adap->dev->udev->descriptor;
- if (desc->idVendor == USB_VID_PINNACLE &&
- desc->idProduct == USB_PID_PINNACLE_EXPRESSCARD_320CX)
+ if (desc->idVendor == cpu_to_le16(USB_VID_PINNACLE) &&
+ desc->idProduct == cpu_to_le16(USB_PID_PINNACLE_EXPRESSCARD_320CX))
dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
else
dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
@@ -845,8 +845,8 @@
struct i2c_adapter *tun_i2c;
s8 a;
int if1=1220;
- if (adap->dev->udev->descriptor.idVendor == USB_VID_HAUPPAUGE &&
- adap->dev->udev->descriptor.idProduct == USB_PID_HAUPPAUGE_NOVA_T_STICK) {
+ if (adap->dev->udev->descriptor.idVendor == cpu_to_le16(USB_VID_HAUPPAUGE) &&
+ adap->dev->udev->descriptor.idProduct == cpu_to_le16(USB_PID_HAUPPAUGE_NOVA_T_STICK)) {
if (!eeprom_read(prim_i2c,0x58,&a)) if1=1220+a;
}
if (st->is_dib7000pc)
@@ -990,11 +990,12 @@
/* STK7070P */
static int stk7070p_frontend_attach(struct dvb_usb_adapter *adap)
{
- if (adap->dev->udev->descriptor.idVendor == USB_VID_PINNACLE &&
- adap->dev->udev->descriptor.idProduct == USB_PID_PINNACLE_PCTV72E)
- dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
+ struct usb_device_descriptor *p = &adap->dev->udev->descriptor;
+ if (p->idVendor == cpu_to_le16(USB_VID_PINNACLE) &&
+ p->idProduct == cpu_to_le16(USB_PID_PINNACLE_PCTV72E))
+ dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0);
else
- dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
+ dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
msleep(10);
dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-firmware.c b/drivers/media/dvb/dvb-usb/dvb-usb-firmware.c
index e1112e3..733a7ff 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb-firmware.c
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-firmware.c
@@ -127,7 +127,7 @@
if ((*pos + hx->len + 4) >= fw->size)
return -EINVAL;
- hx->addr = le16_to_cpu( *((u16 *) &b[1]) );
+ hx->addr = b[1] | (b[2] << 8);
hx->type = b[3];
if (hx->type == 0x04) {
diff --git a/drivers/media/dvb/dvb-usb/gp8psk.c b/drivers/media/dvb/dvb-usb/gp8psk.c
index 9a942af..2653120 100644
--- a/drivers/media/dvb/dvb-usb/gp8psk.c
+++ b/drivers/media/dvb/dvb-usb/gp8psk.c
@@ -146,24 +146,24 @@
if (gp_product_id == USB_PID_GENPIX_8PSK_REV_1_WARM)
if (! (status & bm8pskFW_Loaded)) /* BCM4500 firmware loaded */
if(gp8psk_load_bcm4500fw(d))
- return EINVAL;
+ return -EINVAL;
if (! (status & bmIntersilOn)) /* LNB Power */
if (gp8psk_usb_in_op(d, START_INTERSIL, 1, 0,
&buf, 1))
- return EINVAL;
+ return -EINVAL;
/* Set DVB mode to 1 */
if (gp_product_id == USB_PID_GENPIX_8PSK_REV_1_WARM)
if (gp8psk_usb_out_op(d, SET_DVB_MODE, 1, 0, NULL, 0))
- return EINVAL;
+ return -EINVAL;
/* Abort possible TS (if previous tune crashed) */
if (gp8psk_usb_out_op(d, ARM_TRANSFER, 0, 0, NULL, 0))
- return EINVAL;
+ return -EINVAL;
} else {
/* Turn off LNB power */
if (gp8psk_usb_in_op(d, START_INTERSIL, 0, 0, &buf, 1))
- return EINVAL;
+ return -EINVAL;
/* Turn off 8psk power */
if (gp8psk_usb_in_op(d, BOOT_8PSK, 0, 0, &buf, 1))
return -EINVAL;
diff --git a/drivers/media/dvb/dvb-usb/m920x.c b/drivers/media/dvb/dvb-usb/m920x.c
index a12e6f7..54626a0 100644
--- a/drivers/media/dvb/dvb-usb/m920x.c
+++ b/drivers/media/dvb/dvb-usb/m920x.c
@@ -16,6 +16,7 @@
#include "qt1010.h"
#include "tda1004x.h"
#include "tda827x.h"
+#include <asm/unaligned.h>
/* debug */
static int dvb_usb_m920x_debug;
@@ -347,13 +348,13 @@
for (pass = 0; pass < 2; pass++) {
for (i = 0; i + (sizeof(u16) * 3) < fw->size;) {
- value = le16_to_cpu(*(u16 *)(fw->data + i));
+ value = get_unaligned_le16(fw->data + i);
i += sizeof(u16);
- index = le16_to_cpu(*(u16 *)(fw->data + i));
+ index = get_unaligned_le16(fw->data + i);
i += sizeof(u16);
- size = le16_to_cpu(*(u16 *)(fw->data + i));
+ size = get_unaligned_le16(fw->data + i);
i += sizeof(u16);
if (pass == 1) {
diff --git a/drivers/media/dvb/frontends/Kconfig b/drivers/media/dvb/frontends/Kconfig
index 6d23846..c20553c 100644
--- a/drivers/media/dvb/frontends/Kconfig
+++ b/drivers/media/dvb/frontends/Kconfig
@@ -30,7 +30,7 @@
A DVB-S tuner module. Say Y when you want to support this frontend.
config DVB_MT312
- tristate "Zarlink VP310/MT312 based"
+ tristate "Zarlink VP310/MT312/ZL10313 based"
depends on DVB_CORE && I2C
default m if DVB_FE_CUSTOMISE
help
@@ -97,7 +97,7 @@
config DVB_SP8870
tristate "Spase sp8870 based"
- depends on DVB_CORE && I2C
+ depends on DVB_CORE && I2C && HOTPLUG
default m if DVB_FE_CUSTOMISE
select FW_LOADER
help
@@ -110,7 +110,7 @@
config DVB_SP887X
tristate "Spase sp887x based"
- depends on DVB_CORE && I2C
+ depends on DVB_CORE && I2C && HOTPLUG
default m if DVB_FE_CUSTOMISE
select FW_LOADER
help
@@ -144,7 +144,7 @@
config DVB_TDA1004X
tristate "Philips TDA10045H/TDA10046H based"
- depends on DVB_CORE && I2C
+ depends on DVB_CORE && I2C && HOTPLUG
default m if DVB_FE_CUSTOMISE
select FW_LOADER
help
@@ -211,7 +211,7 @@
config DVB_TDA10048
tristate "Philips TDA10048HN based"
- depends on DVB_CORE && I2C
+ depends on DVB_CORE && I2C && HOTPLUG
default m if DVB_FE_CUSTOMISE
select FW_LOADER
help
@@ -253,7 +253,7 @@
config DVB_NXT200X
tristate "NxtWave Communications NXT2002/NXT2004 based"
- depends on DVB_CORE && I2C
+ depends on DVB_CORE && I2C && HOTPLUG
default m if DVB_FE_CUSTOMISE
select FW_LOADER
help
@@ -268,7 +268,7 @@
config DVB_OR51211
tristate "Oren OR51211 based"
- depends on DVB_CORE && I2C
+ depends on DVB_CORE && I2C && HOTPLUG
default m if DVB_FE_CUSTOMISE
select FW_LOADER
help
@@ -281,7 +281,7 @@
config DVB_OR51132
tristate "Oren OR51132 based"
- depends on DVB_CORE && I2C
+ depends on DVB_CORE && I2C && HOTPLUG
default m if DVB_FE_CUSTOMISE
select FW_LOADER
help
@@ -297,7 +297,7 @@
config DVB_BCM3510
tristate "Broadcom BCM3510"
- depends on DVB_CORE && I2C
+ depends on DVB_CORE && I2C && HOTPLUG
default m if DVB_FE_CUSTOMISE
select FW_LOADER
help
diff --git a/drivers/media/dvb/frontends/dib0070.h b/drivers/media/dvb/frontends/dib0070.h
index 786e37d..3eedfdf 100644
--- a/drivers/media/dvb/frontends/dib0070.h
+++ b/drivers/media/dvb/frontends/dib0070.h
@@ -37,7 +37,20 @@
u8 flip_chip;
};
-extern struct dvb_frontend * dib0070_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct dib0070_config *cfg);
+#if defined(CONFIG_DVB_TUNER_DIB0070) || (defined(CONFIG_DVB_TUNER_DIB0070_MODULE) && defined(MODULE))
+extern struct dvb_frontend *dib0070_attach(struct dvb_frontend *fe,
+ struct i2c_adapter *i2c,
+ struct dib0070_config *cfg);
+#else
+static inline struct dvb_frontend *dib0070_attach(struct dvb_frontend *fe,
+ struct i2c_adapter *i2c,
+ struct dib0070_config *cfg)
+{
+ printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+ return NULL;
+}
+#endif
+
extern void dib0070_ctrl_agc_filter(struct dvb_frontend *, uint8_t open);
extern u16 dib0070_wbd_offset(struct dvb_frontend *);
diff --git a/drivers/media/dvb/frontends/dib7000p.h b/drivers/media/dvb/frontends/dib7000p.h
index 081bd81..07c4d12 100644
--- a/drivers/media/dvb/frontends/dib7000p.h
+++ b/drivers/media/dvb/frontends/dib7000p.h
@@ -37,7 +37,20 @@
#define DEFAULT_DIB7000P_I2C_ADDRESS 18
-extern struct dvb_frontend * dib7000p_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, struct dib7000p_config *cfg);
+#if defined(CONFIG_DVB_DIB7000P) || (defined(CONFIG_DVB_DIB7000P_MODULE) && defined(MODULE))
+extern struct dvb_frontend *dib7000p_attach(struct i2c_adapter *i2c_adap,
+ u8 i2c_addr,
+ struct dib7000p_config *cfg);
+#else
+static inline struct dvb_frontend *dib7000p_attach(struct i2c_adapter *i2c_adap,
+ u8 i2c_addr,
+ struct dib7000p_config *cfg)
+{
+ printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
+ return NULL;
+}
+#endif
+
extern int dib7000p_i2c_enumeration(struct i2c_adapter *i2c, int no_of_demods, u8 default_addr, struct dib7000p_config cfg[]);
extern struct i2c_adapter * dib7000p_get_i2c_master(struct dvb_frontend *, enum dibx000_i2c_interface, int);
diff --git a/drivers/media/dvb/frontends/itd1000.c b/drivers/media/dvb/frontends/itd1000.c
index 04c562c..600dad6 100644
--- a/drivers/media/dvb/frontends/itd1000.c
+++ b/drivers/media/dvb/frontends/itd1000.c
@@ -195,7 +195,7 @@
}
}
-struct {
+static const struct {
u32 freq;
u8 values[10]; /* RFTR, RFST1 - RFST9 */
} itd1000_fre_values[] = {
diff --git a/drivers/media/dvb/frontends/mt312.c b/drivers/media/dvb/frontends/mt312.c
index 081ca33..5ac9b15 100644
--- a/drivers/media/dvb/frontends/mt312.c
+++ b/drivers/media/dvb/frontends/mt312.c
@@ -737,7 +737,7 @@
}
#define MT312_SYS_CLK 90000000UL /* 90 MHz */
-static struct dvb_frontend_ops vp310_mt312_ops = {
+static struct dvb_frontend_ops mt312_ops = {
.info = {
.name = "Zarlink ???? DVB-S",
@@ -776,7 +776,7 @@
.set_voltage = mt312_set_voltage,
};
-struct dvb_frontend *vp310_mt312_attach(const struct mt312_config *config,
+struct dvb_frontend *mt312_attach(const struct mt312_config *config,
struct i2c_adapter *i2c)
{
struct mt312_state *state = NULL;
@@ -795,7 +795,7 @@
goto error;
/* create dvb_frontend */
- memcpy(&state->frontend.ops, &vp310_mt312_ops,
+ memcpy(&state->frontend.ops, &mt312_ops,
sizeof(struct dvb_frontend_ops));
state->frontend.demodulator_priv = state;
@@ -827,12 +827,13 @@
kfree(state);
return NULL;
}
-EXPORT_SYMBOL(vp310_mt312_attach);
+EXPORT_SYMBOL(mt312_attach);
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
MODULE_DESCRIPTION("Zarlink VP310/MT312/ZL10313 DVB-S Demodulator driver");
MODULE_AUTHOR("Andreas Oberritter <obi@linuxtv.org>");
+MODULE_AUTHOR("Matthias Schwarzott <zzam@gentoo.org>");
MODULE_LICENSE("GPL");
diff --git a/drivers/media/dvb/frontends/mt312.h b/drivers/media/dvb/frontends/mt312.h
index de796ea..29e3bb54 100644
--- a/drivers/media/dvb/frontends/mt312.h
+++ b/drivers/media/dvb/frontends/mt312.h
@@ -37,10 +37,10 @@
};
#if defined(CONFIG_DVB_MT312) || (defined(CONFIG_DVB_MT312_MODULE) && defined(MODULE))
-struct dvb_frontend *vp310_mt312_attach(const struct mt312_config *config,
+struct dvb_frontend *mt312_attach(const struct mt312_config *config,
struct i2c_adapter *i2c);
#else
-static inline struct dvb_frontend *vp310_mt312_attach(
+static inline struct dvb_frontend *mt312_attach(
const struct mt312_config *config, struct i2c_adapter *i2c)
{
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
diff --git a/drivers/media/dvb/frontends/or51132.c b/drivers/media/dvb/frontends/or51132.c
index c7b5785..5ed3254 100644
--- a/drivers/media/dvb/frontends/or51132.c
+++ b/drivers/media/dvb/frontends/or51132.c
@@ -126,7 +126,7 @@
reg, err);
return -EREMOTEIO;
}
- return le16_to_cpup((u16*)buf);
+ return buf[0] | (buf[1] << 8);
}
static int or51132_load_firmware (struct dvb_frontend* fe, const struct firmware *fw)
@@ -140,9 +140,9 @@
dprintk("Firmware is %Zd bytes\n",fw->size);
/* Get size of firmware A and B */
- firmwareAsize = le32_to_cpu(*((u32*)fw->data));
+ firmwareAsize = le32_to_cpu(*((__le32*)fw->data));
dprintk("FirmwareA is %i bytes\n",firmwareAsize);
- firmwareBsize = le32_to_cpu(*((u32*)(fw->data+4)));
+ firmwareBsize = le32_to_cpu(*((__le32*)(fw->data+4)));
dprintk("FirmwareB is %i bytes\n",firmwareBsize);
/* Upload firmware */
diff --git a/drivers/media/dvb/ttpci/Kconfig b/drivers/media/dvb/ttpci/Kconfig
index ae882432..d4339b1 100644
--- a/drivers/media/dvb/ttpci/Kconfig
+++ b/drivers/media/dvb/ttpci/Kconfig
@@ -5,6 +5,7 @@
config DVB_AV7110
tristate "AV7110 cards"
depends on DVB_CORE && PCI && I2C
+ depends on HOTPLUG
select FW_LOADER if !DVB_AV7110_FIRMWARE
select TTPCI_EEPROM
select VIDEO_SAA7146_VV
@@ -123,6 +124,7 @@
depends on DVB_BUDGET_CORE && I2C
select VIDEO_SAA7146_VV
depends on VIDEO_DEV # dependencies of VIDEO_SAA7146_VV
+ depends on HOTPLUG # dependency of FW_LOADER
select DVB_PLL if !DVB_FE_CUSTOMISE
select DVB_STV0299 if !DVB_FE_CUSTOMISE
select DVB_TDA1004X if !DVB_FE_CUSTOMISE
diff --git a/drivers/media/dvb/ttpci/av7110.c b/drivers/media/dvb/ttpci/av7110.c
index 747e7f1..f05d43d 100644
--- a/drivers/media/dvb/ttpci/av7110.c
+++ b/drivers/media/dvb/ttpci/av7110.c
@@ -51,6 +51,7 @@
#include <linux/crc32.h>
#include <linux/i2c.h>
#include <linux/kthread.h>
+#include <asm/unaligned.h>
#include <asm/system.h>
@@ -1461,9 +1462,9 @@
ptr += 4;
/* check dpram file */
- crc = ntohl(*(u32*) ptr);
+ crc = get_unaligned_be32(ptr);
ptr += 4;
- len = ntohl(*(u32*) ptr);
+ len = get_unaligned_be32(ptr);
ptr += 4;
if (len >= 512) {
printk("dvb-ttpci: dpram file is way too big.\n");
@@ -1478,9 +1479,9 @@
ptr += len;
/* check root file */
- crc = ntohl(*(u32*) ptr);
+ crc = get_unaligned_be32(ptr);
ptr += 4;
- len = ntohl(*(u32*) ptr);
+ len = get_unaligned_be32(ptr);
ptr += 4;
if (len <= 200000 || len >= 300000 ||
diff --git a/drivers/media/dvb/ttpci/av7110_av.c b/drivers/media/dvb/ttpci/av7110_av.c
index 3e6b650..ec55a968 100644
--- a/drivers/media/dvb/ttpci/av7110_av.c
+++ b/drivers/media/dvb/ttpci/av7110_av.c
@@ -965,8 +965,9 @@
static int play_iframe(struct av7110 *av7110, char __user *buf, unsigned int len, int nonblock)
{
- int i, n;
+ unsigned i, n;
int progressive = 0;
+ int match = 0;
dprintk(2, "av7110:%p, \n", av7110);
@@ -975,12 +976,31 @@
return -EBUSY;
}
- for (i = 0; i < len - 5; i++) {
- /* get progressive flag from picture extension */
- if (buf[i] == 0x00 && buf[i+1] == 0x00 &&
- buf[i+2] == 0x01 && (unsigned char)buf[i+3] == 0xb5 &&
- (buf[i+4] & 0xf0) == 0x10)
- progressive = buf[i+5] & 0x08;
+ /* search in buf for instances of 00 00 01 b5 1? */
+ for (i = 0; i < len; i++) {
+ unsigned char c;
+ if (get_user(c, buf + i))
+ return -EFAULT;
+ if (match == 5) {
+ progressive = c & 0x08;
+ match = 0;
+ }
+ if (c == 0x00) {
+ match = (match == 1 || match == 2) ? 2 : 1;
+ continue;
+ }
+ switch (match++) {
+ case 2: if (c == 0x01)
+ continue;
+ break;
+ case 3: if (c == 0xb5)
+ continue;
+ break;
+ case 4: if ((c & 0xf0) == 0x10)
+ continue;
+ break;
+ }
+ match = 0;
}
/* setting n always > 1, fixes problems when playing stillframes
diff --git a/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c b/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c
index 732ce4d..5d2d81a 100644
--- a/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c
+++ b/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c
@@ -552,7 +552,7 @@
u16 csum = 0, cc;
int i;
for (i = 0; i < len; i += 2)
- csum ^= le16_to_cpup((u16 *) (muxpack + i));
+ csum ^= le16_to_cpup((__le16 *) (muxpack + i));
if (csum) {
printk("%s: muxpack with incorrect checksum, ignoring\n",
__func__);
diff --git a/drivers/media/dvb/ttusb-dec/Kconfig b/drivers/media/dvb/ttusb-dec/Kconfig
index 8361101..a23cc0a 100644
--- a/drivers/media/dvb/ttusb-dec/Kconfig
+++ b/drivers/media/dvb/ttusb-dec/Kconfig
@@ -1,6 +1,7 @@
config DVB_TTUSB_DEC
tristate "Technotrend/Hauppauge USB DEC devices"
- depends on DVB_CORE && USB
+ depends on DVB_CORE && USB && INPUT
+ depends on HOTPLUG # due to FW_LOADER
select FW_LOADER
select CRC32
help
diff --git a/drivers/media/dvb/ttusb-dec/ttusb_dec.c b/drivers/media/dvb/ttusb-dec/ttusb_dec.c
index 42eee04..fefdc05 100644
--- a/drivers/media/dvb/ttusb-dec/ttusb_dec.c
+++ b/drivers/media/dvb/ttusb-dec/ttusb_dec.c
@@ -343,7 +343,7 @@
u8 c[COMMAND_PACKET_SIZE];
int c_length;
int result;
- unsigned int tmp;
+ __be32 tmp;
dprintk("%s\n", __func__);
@@ -398,9 +398,9 @@
0x00, 0x00, 0xff, 0xff,
0xff, 0xff, 0xff, 0xff };
- u16 pcr = htons(dec->pid[DMX_PES_PCR]);
- u16 audio = htons(dec->pid[DMX_PES_AUDIO]);
- u16 video = htons(dec->pid[DMX_PES_VIDEO]);
+ __be16 pcr = htons(dec->pid[DMX_PES_PCR]);
+ __be16 audio = htons(dec->pid[DMX_PES_AUDIO]);
+ __be16 video = htons(dec->pid[DMX_PES_VIDEO]);
dprintk("%s\n", __func__);
@@ -435,7 +435,7 @@
case 0x01: { /* VideoStream */
int prebytes = pva[5] & 0x03;
int postbytes = (pva[5] & 0x0c) >> 2;
- u16 v_pes_payload_length;
+ __be16 v_pes_payload_length;
if (output_pva) {
dec->video_filter->feed->cb.ts(pva, length, NULL, 0,
@@ -1006,7 +1006,7 @@
0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00,
0x00 };
- u16 pid;
+ __be16 pid;
u8 c[COMMAND_PACKET_SIZE];
int c_length;
int result;
@@ -1278,9 +1278,10 @@
u8 *firmware = NULL;
size_t firmware_size = 0;
u16 firmware_csum = 0;
- u16 firmware_csum_ns;
- u32 firmware_size_nl;
- u32 crc32_csum, crc32_check, tmp;
+ __be16 firmware_csum_ns;
+ __be32 firmware_size_nl;
+ u32 crc32_csum, crc32_check;
+ __be32 tmp;
const struct firmware *fw_entry = NULL;
dprintk("%s\n", __func__);
@@ -1306,7 +1307,7 @@
valid. */
crc32_csum = crc32(~0L, firmware, 56) ^ ~0L;
memcpy(&tmp, &firmware[56], 4);
- crc32_check = htonl(tmp);
+ crc32_check = ntohl(tmp);
if (crc32_csum != crc32_check) {
printk("%s: crc32 check of DSP code failed (calculated "
"0x%08x != 0x%08x in file), file invalid.\n",
@@ -1627,7 +1628,7 @@
usb_set_intfdata(intf, (void *)dec);
- switch (le16_to_cpu(id->idProduct)) {
+ switch (id->idProduct) {
case 0x1006:
ttusb_dec_set_model(dec, TTUSB_DEC3000S);
break;
@@ -1652,7 +1653,7 @@
ttusb_dec_init_dvb(dec);
dec->adapter.priv = dec;
- switch (le16_to_cpu(id->idProduct)) {
+ switch (id->idProduct) {
case 0x1006:
dec->fe = ttusbdecfe_dvbs_attach(&fe_config);
break;
diff --git a/drivers/media/dvb/ttusb-dec/ttusbdecfe.c b/drivers/media/dvb/ttusb-dec/ttusbdecfe.c
index eb5eaec..443af24 100644
--- a/drivers/media/dvb/ttusb-dec/ttusbdecfe.c
+++ b/drivers/media/dvb/ttusb-dec/ttusbdecfe.c
@@ -86,7 +86,7 @@
0x00, 0x00, 0x00, 0xff,
0x00, 0x00, 0x00, 0xff };
- u32 freq = htonl(p->frequency / 1000);
+ __be32 freq = htonl(p->frequency / 1000);
memcpy(&b[4], &freq, sizeof (u32));
state->config->send_command(fe, 0x71, sizeof(b), b, NULL, NULL);
@@ -117,10 +117,10 @@
0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00, 0x00 };
- u32 freq;
- u32 sym_rate;
- u32 band;
- u32 lnb_voltage;
+ __be32 freq;
+ __be32 sym_rate;
+ __be32 band;
+ __be32 lnb_voltage;
freq = htonl(p->frequency +
(state->hi_band ? LOF_HI : LOF_LO));
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index fe743aa..3b26fbd3 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -44,6 +44,10 @@
tristate
depends on I2C
+config VIDEO_TUNER
+ tristate
+ depends on MEDIA_TUNER
+
#
# Multimedia Video device configuration
#
@@ -690,7 +694,7 @@
tristate "Siemens-Nixdorf 'Multimedia eXtension Board'"
depends on PCI && VIDEO_V4L1 && I2C
select VIDEO_SAA7146_VV
- select MEDIA_TUNER
+ select VIDEO_TUNER
select VIDEO_SAA7111 if VIDEO_HELPER_CHIPS_AUTO
select VIDEO_TDA9840 if VIDEO_HELPER_CHIPS_AUTO
select VIDEO_TEA6415C if VIDEO_HELPER_CHIPS_AUTO
@@ -897,7 +901,7 @@
config SOC_CAMERA
tristate "SoC camera support"
- depends on VIDEO_V4L2
+ depends on VIDEO_V4L2 && HAS_DMA
select VIDEOBUF_DMA_SG
help
SoC Camera is a common API to several cameras, not connecting
@@ -906,7 +910,7 @@
config SOC_CAMERA_MT9M001
tristate "mt9m001 support"
- depends on SOC_CAMERA
+ depends on SOC_CAMERA && I2C
select GPIO_PCA953X if MT9M001_PCA9536_SWITCH
help
This driver supports MT9M001 cameras from Micron, monochrome
@@ -921,7 +925,7 @@
config SOC_CAMERA_MT9V022
tristate "mt9v022 support"
- depends on SOC_CAMERA
+ depends on SOC_CAMERA && I2C
select GPIO_PCA953X if MT9V022_PCA9536_SWITCH
help
This driver supports MT9V022 cameras from Micron
diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile
index a352c6e..dff0d6a 100644
--- a/drivers/media/video/Makefile
+++ b/drivers/media/video/Makefile
@@ -84,7 +84,7 @@
obj-$(CONFIG_VIDEO_DPC) += dpc7146.o
obj-$(CONFIG_TUNER_3036) += tuner-3036.o
-obj-$(CONFIG_MEDIA_TUNER) += tuner.o
+obj-$(CONFIG_VIDEO_TUNER) += tuner.o
obj-$(CONFIG_VIDEOBUF_GEN) += videobuf-core.o
obj-$(CONFIG_VIDEOBUF_DMA_SG) += videobuf-dma-sg.o
diff --git a/drivers/media/video/au0828/Kconfig b/drivers/media/video/au0828/Kconfig
index cab277f..52b2491 100644
--- a/drivers/media/video/au0828/Kconfig
+++ b/drivers/media/video/au0828/Kconfig
@@ -1,8 +1,9 @@
config VIDEO_AU0828
tristate "Auvitek AU0828 support"
- depends on VIDEO_DEV && I2C && INPUT && DVB_CORE
+ depends on I2C && INPUT && DVB_CORE && USB
select I2C_ALGOBIT
+ select VIDEO_TVEEPROM
select DVB_AU8522 if !DVB_FE_CUSTOMIZE
select MEDIA_TUNER_XC5000 if !DVB_FE_CUSTOMIZE
---help---
diff --git a/drivers/media/video/au0828/au0828-dvb.c b/drivers/media/video/au0828/au0828-dvb.c
index 1371b4e..c6d4705 100644
--- a/drivers/media/video/au0828/au0828-dvb.c
+++ b/drivers/media/video/au0828/au0828-dvb.c
@@ -337,12 +337,10 @@
dvb->frontend = dvb_attach(au8522_attach,
&hauppauge_hvr950q_config,
&dev->i2c_adap);
- if (dvb->frontend != NULL) {
- hauppauge_hvr950q_tunerconfig.priv = dev;
+ if (dvb->frontend != NULL)
dvb_attach(xc5000_attach, dvb->frontend,
&dev->i2c_adap,
- &hauppauge_hvr950q_tunerconfig);
- }
+ &hauppauge_hvr950q_tunerconfig, dev);
break;
default:
printk(KERN_WARNING "The frontend of your DVB/ATSC card "
@@ -355,12 +353,6 @@
return -1;
}
- /* Put the analog decoder in standby to keep it quiet */
- au0828_call_i2c_clients(dev, TUNER_SET_STANDBY, NULL);
-
- if (dvb->frontend->ops.analog_ops.standby)
- dvb->frontend->ops.analog_ops.standby(dvb->frontend);
-
/* register everything */
ret = dvb_register(dev);
if (ret < 0) {
diff --git a/drivers/media/video/bt8xx/Kconfig b/drivers/media/video/bt8xx/Kconfig
index 7431ef6..24a34fc 100644
--- a/drivers/media/video/bt8xx/Kconfig
+++ b/drivers/media/video/bt8xx/Kconfig
@@ -1,12 +1,13 @@
config VIDEO_BT848
tristate "BT848 Video For Linux"
depends on VIDEO_DEV && PCI && I2C && VIDEO_V4L2 && INPUT
+ depends on HOTPLUG # due to FW_LOADER
select I2C_ALGOBIT
select FW_LOADER
select VIDEO_BTCX
select VIDEOBUF_DMA_SG
select VIDEO_IR
- select MEDIA_TUNER
+ select VIDEO_TUNER
select VIDEO_TVEEPROM
select VIDEO_MSP3400 if VIDEO_HELPER_CHIPS_AUTO
select VIDEO_TVAUDIO if VIDEO_HELPER_CHIPS_AUTO
diff --git a/drivers/media/video/bt8xx/bttv-cards.c b/drivers/media/video/bt8xx/bttv-cards.c
index f20a01c..8ef0424 100644
--- a/drivers/media/video/bt8xx/bttv-cards.c
+++ b/drivers/media/video/bt8xx/bttv-cards.c
@@ -34,6 +34,7 @@
#include <linux/firmware.h>
#include <net/checksum.h>
+#include <asm/unaligned.h>
#include <asm/io.h>
#include "bttvp.h"
@@ -3858,7 +3859,7 @@
ee += i;
/* found a valid descriptor */
- type = be16_to_cpup((u16*)(ee+4));
+ type = get_unaligned_be16((__be16 *)(ee+4));
switch(type) {
/* 848 based */
@@ -3918,7 +3919,7 @@
btv->c.nr, type);
break;
}
- serial = be32_to_cpup((u32*)(ee+6));
+ serial = get_unaligned_be32((__be32 *)(ee+6));
}
printk(KERN_INFO "bttv%d: osprey eeprom: card=%d '%s' serial=%u\n",
diff --git a/drivers/media/video/bt8xx/bttv-driver.c b/drivers/media/video/bt8xx/bttv-driver.c
index 2ca3e9c..0165aac 100644
--- a/drivers/media/video/bt8xx/bttv-driver.c
+++ b/drivers/media/video/bt8xx/bttv-driver.c
@@ -2613,7 +2613,7 @@
struct bttv_fh *fh = priv;
mutex_lock(&fh->cap.vb_lock);
- retval = videobuf_mmap_setup(&fh->cap, gbuffers, gbufsize,
+ retval = __videobuf_mmap_setup(&fh->cap, gbuffers, gbufsize,
V4L2_MEMORY_MMAP);
if (retval < 0) {
mutex_unlock(&fh->cap.vb_lock);
diff --git a/drivers/media/video/bt8xx/bttv-risc.c b/drivers/media/video/bt8xx/bttv-risc.c
index e5979f7..0af5868 100644
--- a/drivers/media/video/bt8xx/bttv-risc.c
+++ b/drivers/media/video/bt8xx/bttv-risc.c
@@ -48,7 +48,7 @@
{
u32 instructions,line,todo;
struct scatterlist *sg;
- u32 *rp;
+ __le32 *rp;
int rc;
/* estimate risc mem: worst case is one write per page border +
@@ -128,7 +128,8 @@
unsigned int cpadding)
{
unsigned int instructions,line,todo,ylen,chroma;
- u32 *rp,ri;
+ __le32 *rp;
+ u32 ri;
struct scatterlist *ysg;
struct scatterlist *usg;
struct scatterlist *vsg;
@@ -244,7 +245,8 @@
{
int dwords,rc,line,maxy,start,end,skip,nskips;
struct btcx_skiplist *skips;
- u32 *rp,ri,ra;
+ __le32 *rp;
+ u32 ri,ra;
u32 addr;
/* skip list for window clipping */
diff --git a/drivers/media/video/btcx-risc.c b/drivers/media/video/btcx-risc.c
index ce0840c..f42701f 100644
--- a/drivers/media/video/btcx-risc.c
+++ b/drivers/media/video/btcx-risc.c
@@ -63,7 +63,7 @@
struct btcx_riscmem *risc,
unsigned int size)
{
- u32 *cpu;
+ __le32 *cpu;
dma_addr_t dma;
if (NULL != risc->cpu && risc->size < size)
diff --git a/drivers/media/video/btcx-risc.h b/drivers/media/video/btcx-risc.h
index 503e6c6..861bc81 100644
--- a/drivers/media/video/btcx-risc.h
+++ b/drivers/media/video/btcx-risc.h
@@ -2,8 +2,8 @@
*/
struct btcx_riscmem {
unsigned int size;
- u32 *cpu;
- u32 *jmp;
+ __le32 *cpu;
+ __le32 *jmp;
dma_addr_t dma;
};
diff --git a/drivers/media/video/cs5345.c b/drivers/media/video/cs5345.c
index 2a429f9..0341150 100644
--- a/drivers/media/video/cs5345.c
+++ b/drivers/media/video/cs5345.c
@@ -160,10 +160,17 @@
/* ----------------------------------------------------------------------- */
+static const struct i2c_device_id cs5345_id[] = {
+ { "cs5345", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, cs5345_id);
+
static struct v4l2_i2c_driver_data v4l2_i2c_data = {
.name = "cs5345",
.driverid = I2C_DRIVERID_CS5345,
.command = cs5345_command,
.probe = cs5345_probe,
+ .id_table = cs5345_id,
};
diff --git a/drivers/media/video/cs53l32a.c b/drivers/media/video/cs53l32a.c
index 2dfd0af..d965af8 100644
--- a/drivers/media/video/cs53l32a.c
+++ b/drivers/media/video/cs53l32a.c
@@ -144,7 +144,8 @@
if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -EIO;
- snprintf(client->name, sizeof(client->name) - 1, "cs53l32a");
+ if (!id)
+ strlcpy(client->name, "cs53l32a", sizeof(client->name));
v4l_info(client, "chip found @ 0x%x (%s)\n",
client->addr << 1, client->adapter->name);
@@ -175,10 +176,17 @@
return 0;
}
+static const struct i2c_device_id cs53l32a_id[] = {
+ { "cs53l32a", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, cs53l32a_id);
+
static struct v4l2_i2c_driver_data v4l2_i2c_data = {
.name = "cs53l32a",
.driverid = I2C_DRIVERID_CS53L32A,
.command = cs53l32a_command,
.probe = cs53l32a_probe,
+ .id_table = cs53l32a_id,
};
diff --git a/drivers/media/video/cx18/Kconfig b/drivers/media/video/cx18/Kconfig
index acc4b47..5f94269 100644
--- a/drivers/media/video/cx18/Kconfig
+++ b/drivers/media/video/cx18/Kconfig
@@ -1,14 +1,17 @@
config VIDEO_CX18
tristate "Conexant cx23418 MPEG encoder support"
depends on VIDEO_V4L2 && DVB_CORE && PCI && I2C && EXPERIMENTAL
+ depends on INPUT # due to VIDEO_IR
+ depends on HOTPLUG # due to FW_LOADER
select I2C_ALGOBIT
select FW_LOADER
select VIDEO_IR
- select MEDIA_TUNER
+ select VIDEO_TUNER
select VIDEO_TVEEPROM
select VIDEO_CX2341X
select VIDEO_CS5345
select DVB_S5H1409
+ select MEDIA_TUNER_MXL5005S
---help---
This is a video4linux driver for Conexant cx23418 based
PCI combo video recorder devices.
diff --git a/drivers/media/video/cx18/cx18-av-core.c b/drivers/media/video/cx18/cx18-av-core.c
index 6686490..9a26751 100644
--- a/drivers/media/video/cx18/cx18-av-core.c
+++ b/drivers/media/video/cx18/cx18-av-core.c
@@ -182,14 +182,16 @@
if (std == V4L2_STD_NTSC_M_JP) {
/* Japan uses EIAJ audio standard */
cx18_av_write(cx, 0x808, 0xf7);
+ cx18_av_write(cx, 0x80b, 0x02);
} else if (std == V4L2_STD_NTSC_M_KR) {
/* South Korea uses A2 audio standard */
cx18_av_write(cx, 0x808, 0xf8);
+ cx18_av_write(cx, 0x80b, 0x03);
} else {
/* Others use the BTSC audio standard */
cx18_av_write(cx, 0x808, 0xf6);
+ cx18_av_write(cx, 0x80b, 0x01);
}
- cx18_av_write(cx, 0x80b, 0x00);
} else if (std & V4L2_STD_PAL) {
/* Follow tuner change procedure for PAL */
cx18_av_write(cx, 0x808, 0xff);
@@ -741,8 +743,8 @@
{
struct cx18_av_state *state = &cx->av_state;
u8 download_ctl = cx18_av_read(cx, 0x803);
- u8 mod_det_stat0 = cx18_av_read(cx, 0x805);
- u8 mod_det_stat1 = cx18_av_read(cx, 0x804);
+ u8 mod_det_stat0 = cx18_av_read(cx, 0x804);
+ u8 mod_det_stat1 = cx18_av_read(cx, 0x805);
u8 audio_config = cx18_av_read(cx, 0x808);
u8 pref_mode = cx18_av_read(cx, 0x809);
u8 afc0 = cx18_av_read(cx, 0x80b);
@@ -760,12 +762,12 @@
case 0x12: p = "dual with SAP"; break;
case 0x14: p = "tri with SAP"; break;
case 0xfe: p = "forced mode"; break;
- default: p = "not defined";
+ default: p = "not defined"; break;
}
CX18_INFO("Detected audio mode: %s\n", p);
switch (mod_det_stat1) {
- case 0x00: p = "BTSC"; break;
+ case 0x00: p = "not defined"; break;
case 0x01: p = "EIAJ"; break;
case 0x02: p = "A2-M"; break;
case 0x03: p = "A2-BG"; break;
@@ -779,8 +781,13 @@
case 0x0b: p = "NICAM-I"; break;
case 0x0c: p = "NICAM-L"; break;
case 0x0d: p = "BTSC/EIAJ/A2-M Mono (4.5 MHz FMMono)"; break;
+ case 0x0e: p = "IF FM Radio"; break;
+ case 0x0f: p = "BTSC"; break;
+ case 0x10: p = "detected chrominance"; break;
+ case 0xfd: p = "unknown audio standard"; break;
+ case 0xfe: p = "forced audio standard"; break;
case 0xff: p = "no detected audio standard"; break;
- default: p = "not defined";
+ default: p = "not defined"; break;
}
CX18_INFO("Detected audio standard: %s\n", p);
CX18_INFO("Audio muted: %s\n",
@@ -789,22 +796,23 @@
(download_ctl & 0x10) ? "running" : "stopped");
switch (audio_config >> 4) {
- case 0x00: p = "BTSC"; break;
- case 0x01: p = "EIAJ"; break;
- case 0x02: p = "A2-M"; break;
- case 0x03: p = "A2-BG"; break;
- case 0x04: p = "A2-DK1"; break;
- case 0x05: p = "A2-DK2"; break;
- case 0x06: p = "A2-DK3"; break;
- case 0x07: p = "A1 (6.0 MHz FM Mono)"; break;
- case 0x08: p = "AM-L"; break;
- case 0x09: p = "NICAM-BG"; break;
- case 0x0a: p = "NICAM-DK"; break;
- case 0x0b: p = "NICAM-I"; break;
- case 0x0c: p = "NICAM-L"; break;
- case 0x0d: p = "FM radio"; break;
+ case 0x00: p = "undefined"; break;
+ case 0x01: p = "BTSC"; break;
+ case 0x02: p = "EIAJ"; break;
+ case 0x03: p = "A2-M"; break;
+ case 0x04: p = "A2-BG"; break;
+ case 0x05: p = "A2-DK1"; break;
+ case 0x06: p = "A2-DK2"; break;
+ case 0x07: p = "A2-DK3"; break;
+ case 0x08: p = "A1 (6.0 MHz FM Mono)"; break;
+ case 0x09: p = "AM-L"; break;
+ case 0x0a: p = "NICAM-BG"; break;
+ case 0x0b: p = "NICAM-DK"; break;
+ case 0x0c: p = "NICAM-I"; break;
+ case 0x0d: p = "NICAM-L"; break;
+ case 0x0e: p = "FM radio"; break;
case 0x0f: p = "automatic detection"; break;
- default: p = "undefined";
+ default: p = "undefined"; break;
}
CX18_INFO("Configured audio standard: %s\n", p);
@@ -815,12 +823,9 @@
case 0x02: p = "MONO3 (STEREO forced MONO)"; break;
case 0x03: p = "MONO4 (NICAM ANALOG-Language C/Analog Fallback)"; break;
case 0x04: p = "STEREO"; break;
- case 0x05: p = "DUAL1 (AB)"; break;
- case 0x06: p = "DUAL2 (AC) (FM)"; break;
- case 0x07: p = "DUAL3 (BC) (FM)"; break;
- case 0x08: p = "DUAL4 (AC) (AM)"; break;
- case 0x09: p = "DUAL5 (BC) (AM)"; break;
- case 0x0a: p = "SAP"; break;
+ case 0x05: p = "DUAL1 (AC)"; break;
+ case 0x06: p = "DUAL2 (BC)"; break;
+ case 0x07: p = "DUAL3 (AB)"; break;
default: p = "undefined";
}
CX18_INFO("Configured audio mode: %s\n", p);
@@ -835,9 +840,11 @@
case 0x06: p = "BTSC"; break;
case 0x07: p = "EIAJ"; break;
case 0x08: p = "A2-M"; break;
- case 0x09: p = "FM Radio"; break;
+ case 0x09: p = "FM Radio (4.5 MHz)"; break;
+ case 0x0a: p = "FM Radio (5.5 MHz)"; break;
+ case 0x0b: p = "S-Video"; break;
case 0x0f: p = "automatic standard and mode detection"; break;
- default: p = "undefined";
+ default: p = "undefined"; break;
}
CX18_INFO("Configured audio system: %s\n", p);
}
@@ -857,22 +864,24 @@
case 5: p = "language AC"; break;
case 6: p = "language BC"; break;
case 7: p = "language AB"; break;
- default: p = "undefined";
+ default: p = "undefined"; break;
}
CX18_INFO("Preferred audio mode: %s\n", p);
if ((audio_config & 0xf) == 0xf) {
- switch ((afc0 >> 2) & 0x1) {
+ switch ((afc0 >> 3) & 0x1) {
case 0: p = "system DK"; break;
case 1: p = "system L"; break;
}
CX18_INFO("Selected 65 MHz format: %s\n", p);
- switch (afc0 & 0x3) {
- case 0: p = "BTSC"; break;
- case 1: p = "EIAJ"; break;
- case 2: p = "A2-M"; break;
- default: p = "undefined";
+ switch (afc0 & 0x7) {
+ case 0: p = "Chroma"; break;
+ case 1: p = "BTSC"; break;
+ case 2: p = "EIAJ"; break;
+ case 3: p = "A2-M"; break;
+ case 4: p = "autodetect"; break;
+ default: p = "undefined"; break;
}
CX18_INFO("Selected 45 MHz format: %s\n", p);
}
diff --git a/drivers/media/video/cx18/cx18-cards.c b/drivers/media/video/cx18/cx18-cards.c
index f5e3ba1..baccd07 100644
--- a/drivers/media/video/cx18/cx18-cards.c
+++ b/drivers/media/video/cx18/cx18-cards.c
@@ -47,11 +47,12 @@
static const struct cx18_card cx18_card_hvr1600_esmt = {
.type = CX18_CARD_HVR_1600_ESMT,
.name = "Hauppauge HVR-1600",
- .comment = "DVB & VBI are not yet supported\n",
+ .comment = "VBI is not yet supported\n",
.v4l2_capabilities = CX18_CAP_ENCODER,
.hw_audio_ctrl = CX18_HW_CX23418,
.hw_muxer = CX18_HW_CS5345,
- .hw_all = CX18_HW_TVEEPROM | CX18_HW_TUNER | CX18_HW_CS5345,
+ .hw_all = CX18_HW_TVEEPROM | CX18_HW_TUNER |
+ CX18_HW_CS5345 | CX18_HW_DVB,
.video_inputs = {
{ CX18_CARD_INPUT_VID_TUNER, 0, CX23418_COMPOSITE7 },
{ CX18_CARD_INPUT_SVIDEO1, 1, CX23418_SVIDEO1 },
@@ -86,11 +87,12 @@
static const struct cx18_card cx18_card_hvr1600_samsung = {
.type = CX18_CARD_HVR_1600_SAMSUNG,
.name = "Hauppauge HVR-1600 (Preproduction)",
- .comment = "DVB & VBI are not yet supported\n",
+ .comment = "VBI is not yet supported\n",
.v4l2_capabilities = CX18_CAP_ENCODER,
.hw_audio_ctrl = CX18_HW_CX23418,
.hw_muxer = CX18_HW_CS5345,
- .hw_all = CX18_HW_TVEEPROM | CX18_HW_TUNER | CX18_HW_CS5345,
+ .hw_all = CX18_HW_TVEEPROM | CX18_HW_TUNER |
+ CX18_HW_CS5345 | CX18_HW_DVB,
.video_inputs = {
{ CX18_CARD_INPUT_VID_TUNER, 0, CX23418_COMPOSITE7 },
{ CX18_CARD_INPUT_SVIDEO1, 1, CX23418_SVIDEO1 },
@@ -124,7 +126,7 @@
/* ------------------------------------------------------------------------- */
-/* Compro VideoMate H900: not working at the moment! */
+/* Compro VideoMate H900: note that this card is analog only! */
static const struct cx18_card_pci_info cx18_pci_h900[] = {
{ PCI_DEVICE_ID_CX23418, CX18_PCI_ID_COMPRO, 0xe100 },
@@ -134,14 +136,15 @@
static const struct cx18_card cx18_card_h900 = {
.type = CX18_CARD_COMPRO_H900,
.name = "Compro VideoMate H900",
- .comment = "Not yet supported!\n",
- .v4l2_capabilities = 0,
+ .comment = "VBI is not yet supported\n",
+ .v4l2_capabilities = CX18_CAP_ENCODER,
.hw_audio_ctrl = CX18_HW_CX23418,
.hw_all = CX18_HW_TUNER,
.video_inputs = {
- { CX18_CARD_INPUT_VID_TUNER, 0, CX23418_COMPOSITE7 },
- { CX18_CARD_INPUT_SVIDEO1, 1, CX23418_SVIDEO1 },
- { CX18_CARD_INPUT_COMPOSITE1, 1, CX23418_COMPOSITE3 },
+ { CX18_CARD_INPUT_VID_TUNER, 0, CX23418_COMPOSITE2 },
+ { CX18_CARD_INPUT_SVIDEO1, 1,
+ CX23418_SVIDEO_LUMA3 | CX23418_SVIDEO_CHROMA4 },
+ { CX18_CARD_INPUT_COMPOSITE1, 1, CX23418_COMPOSITE1 },
},
.audio_inputs = {
{ CX18_CARD_INPUT_AUD_TUNER,
@@ -163,6 +166,7 @@
.tune_lane = 0,
.initial_emrs = 0,
},
+ .xceive_pin = 15,
.pci_list = cx18_pci_h900,
.i2c = &cx18_i2c_std,
};
@@ -200,8 +204,6 @@
/* XC3028 tuner */
{ .std = V4L2_STD_ALL, .tuner = TUNER_XC2028 },
},
- /* tuner reset */
- .gpio_init = { .direction = 0x1000, .initial_value = 0x1000 },
.ddr = {
/* Probably Samsung K4D263238G-VC33 memory */
.chip_config = 0x003,
@@ -211,6 +213,7 @@
.tune_lane = 0,
.initial_emrs = 2,
},
+ .xceive_pin = 15,
.pci_list = cx18_pci_mpc718,
.i2c = &cx18_i2c_std,
};
diff --git a/drivers/media/video/cx18/cx18-cards.h b/drivers/media/video/cx18/cx18-cards.h
index bca249b..bccb67f 100644
--- a/drivers/media/video/cx18/cx18-cards.h
+++ b/drivers/media/video/cx18/cx18-cards.h
@@ -114,8 +114,8 @@
/* The mask is the set of bits used by the operation */
struct cx18_gpio_init { /* set initial GPIO DIR and OUT values */
- u16 direction; /* DIR setting. Leave to 0 if no init is needed */
- u16 initial_value;
+ u32 direction; /* DIR setting. Leave to 0 if no init is needed */
+ u32 initial_value;
};
struct cx18_card_tuner {
@@ -153,6 +153,7 @@
struct cx18_card_audio_input radio_input;
/* GPIO card-specific settings */
+ u8 xceive_pin; /* XCeive tuner GPIO reset pin */
struct cx18_gpio_init gpio_init;
struct cx18_card_tuner tuners[CX18_CARD_MAX_TUNERS];
diff --git a/drivers/media/video/cx18/cx18-controls.c b/drivers/media/video/cx18/cx18-controls.c
index 2bdac5e..87cf410 100644
--- a/drivers/media/video/cx18/cx18-controls.c
+++ b/drivers/media/video/cx18/cx18-controls.c
@@ -159,7 +159,7 @@
{
if (!(cx->v4l2_cap & V4L2_CAP_SLICED_VBI_CAPTURE))
return -EINVAL;
- if (atomic_read(&cx->capturing) > 0)
+ if (atomic_read(&cx->ana_capturing) > 0)
return -EBUSY;
/* First try to allocate sliced VBI buffers if needed. */
@@ -235,7 +235,7 @@
CX18_DEBUG_IOCTL("VIDIOC_S_EXT_CTRLS\n");
if (c->ctrl_class == V4L2_CTRL_CLASS_MPEG) {
struct cx2341x_mpeg_params p = cx->params;
- int err = cx2341x_ext_ctrls(&p, atomic_read(&cx->capturing), arg, cmd);
+ int err = cx2341x_ext_ctrls(&p, atomic_read(&cx->ana_capturing), arg, cmd);
if (err)
return err;
@@ -295,7 +295,7 @@
CX18_DEBUG_IOCTL("VIDIOC_TRY_EXT_CTRLS\n");
if (c->ctrl_class == V4L2_CTRL_CLASS_MPEG)
return cx2341x_ext_ctrls(&cx->params,
- atomic_read(&cx->capturing), arg, cmd);
+ atomic_read(&cx->ana_capturing), arg, cmd);
return -EINVAL;
}
diff --git a/drivers/media/video/cx18/cx18-driver.c b/drivers/media/video/cx18/cx18-driver.c
index 3f55d47..2b810bb 100644
--- a/drivers/media/video/cx18/cx18-driver.c
+++ b/drivers/media/video/cx18/cx18-driver.c
@@ -164,16 +164,6 @@
MODULE_VERSION(CX18_VERSION);
-int cx18_waitq(wait_queue_head_t *waitq)
-{
- DEFINE_WAIT(wait);
-
- prepare_to_wait(waitq, &wait, TASK_INTERRUPTIBLE);
- schedule();
- finish_wait(waitq, &wait);
- return signal_pending(current) ? -EINTR : 0;
-}
-
/* Generic utility functions */
int cx18_msleep_timeout(unsigned int msecs, int intr)
{
@@ -220,13 +210,13 @@
/* Many thanks to Steven Toth from Hauppauge for providing the
model numbers */
+ /* Note: the Samsung memory models cannot be reliably determined
+ from the model number. Use the cardtype module option if you
+ have one of these preproduction models. */
switch (tv.model) {
- case 74000 ... 74099:
+ case 74000 ... 74999:
cx->card = cx18_get_card(CX18_CARD_HVR_1600_ESMT);
break;
- case 74700 ... 74799:
- cx->card = cx18_get_card(CX18_CARD_HVR_1600_SAMSUNG);
- break;
case 0:
CX18_ERR("Invalid EEPROM\n");
return;
@@ -548,6 +538,7 @@
return 0;
}
+#ifdef MODULE
static u32 cx18_request_module(struct cx18 *cx, u32 hw,
const char *name, u32 id)
{
@@ -560,12 +551,14 @@
CX18_DEBUG_INFO("Loaded module %s\n", name);
return hw;
}
+#endif
static void cx18_load_and_init_modules(struct cx18 *cx)
{
u32 hw = cx->card->hw_all;
int i;
+#ifdef MODULE
/* load modules */
#ifndef CONFIG_MEDIA_TUNER
hw = cx18_request_module(cx, hw, "tuner", CX18_HW_TUNER);
@@ -573,6 +566,7 @@
#ifndef CONFIG_VIDEO_CS5345
hw = cx18_request_module(cx, hw, "cs5345", CX18_HW_CS5345);
#endif
+#endif
/* check which i2c devices are actually found */
for (i = 0; i < 32; i++) {
@@ -676,7 +670,7 @@
cx18_init_power(cx, 1);
cx18_init_memory(cx);
- cx->scb = (struct cx18_scb *)(cx->enc_mem + SCB_OFFSET);
+ cx->scb = (struct cx18_scb __iomem *)(cx->enc_mem + SCB_OFFSET);
cx18_init_scb(cx);
cx18_gpio_init(cx);
@@ -757,17 +751,6 @@
if (cx->options.radio > 0)
cx->v4l2_cap |= V4L2_CAP_RADIO;
- retval = cx18_streams_setup(cx);
- if (retval) {
- CX18_ERR("Error %d setting up streams\n", retval);
- goto free_irq;
- }
- retval = cx18_streams_register(cx);
- if (retval) {
- CX18_ERR("Error %d registering devices\n", retval);
- goto free_streams;
- }
-
if (cx->options.tuner > -1) {
struct tuner_setup setup;
@@ -794,14 +777,23 @@
are not. */
cx->tuner_std = cx->std;
- cx18_init_on_first_open(cx);
+ retval = cx18_streams_setup(cx);
+ if (retval) {
+ CX18_ERR("Error %d setting up streams\n", retval);
+ goto free_irq;
+ }
+ retval = cx18_streams_register(cx);
+ if (retval) {
+ CX18_ERR("Error %d registering devices\n", retval);
+ goto free_streams;
+ }
CX18_INFO("Initialized card #%d: %s\n", cx->num, cx->card_name);
return 0;
free_streams:
- cx18_streams_cleanup(cx);
+ cx18_streams_cleanup(cx, 1);
free_irq:
free_irq(cx->dev->irq, (void *)cx);
free_i2c:
@@ -895,7 +887,7 @@
/* Stop all captures */
CX18_DEBUG_INFO("Stopping all streams\n");
- if (atomic_read(&cx->capturing) > 0)
+ if (atomic_read(&cx->tot_capturing) > 0)
cx18_stop_all_captures(cx);
/* Interrupts */
@@ -904,14 +896,13 @@
cx18_halt_firmware(cx);
- cx18_streams_cleanup(cx);
+ cx18_streams_cleanup(cx, 1);
exit_cx18_i2c(cx);
free_irq(cx->dev->irq, (void *)cx);
- if (cx->dev)
- cx18_iounmap(cx);
+ cx18_iounmap(cx);
release_mem_region(cx->base_addr, CX18_MEM_SIZE);
diff --git a/drivers/media/video/cx18/cx18-driver.h b/drivers/media/video/cx18/cx18-driver.h
index 2ee9391..de14ab5 100644
--- a/drivers/media/video/cx18/cx18-driver.h
+++ b/drivers/media/video/cx18/cx18-driver.h
@@ -358,7 +358,7 @@
u32 v4l2_cap; /* V4L2 capabilities of card */
u32 hw_flags; /* Hardware description of the board */
unsigned mdl_offset;
- struct cx18_scb *scb; /* pointer to SCB */
+ struct cx18_scb __iomem *scb; /* pointer to SCB */
struct cx18_av_state av_state;
@@ -380,7 +380,8 @@
int stream_buf_size[CX18_MAX_STREAMS]; /* Stream buffer size */
struct cx18_stream streams[CX18_MAX_STREAMS]; /* Stream data */
unsigned long i_flags; /* global cx18 flags */
- atomic_t capturing; /* count number of active capture streams */
+ atomic_t ana_capturing; /* count number of active analog capture streams */
+ atomic_t tot_capturing; /* total count number of active capture streams */
spinlock_t lock; /* lock access to this struct */
int search_pack_header;
@@ -423,6 +424,10 @@
struct mutex i2c_bus_lock[2];
struct i2c_client *i2c_clients[I2C_CLIENTS_MAX];
+ /* gpio */
+ u32 gpio_dir;
+ u32 gpio_val;
+
/* v4l2 and User settings */
/* codec settings */
@@ -444,9 +449,6 @@
/* Return non-zero if a signal is pending */
int cx18_msleep_timeout(unsigned int msecs, int intr);
-/* Wait on queue, returns -EINTR if interrupted */
-int cx18_waitq(wait_queue_head_t *waitq);
-
/* Read Hauppauge eeprom */
struct tveeprom; /* forward reference */
void cx18_read_eeprom(struct cx18 *cx, struct tveeprom *tv);
diff --git a/drivers/media/video/cx18/cx18-dvb.c b/drivers/media/video/cx18/cx18-dvb.c
index 65efe69..c974417 100644
--- a/drivers/media/video/cx18/cx18-dvb.c
+++ b/drivers/media/video/cx18/cx18-dvb.c
@@ -24,25 +24,27 @@
#include "cx18-streams.h"
#include "cx18-cards.h"
#include "s5h1409.h"
-
-/* Wait until the MXL500X driver is merged */
-#ifdef HAVE_MXL500X
-#include "mxl500x.h"
-#endif
+#include "mxl5005s.h"
DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
#define CX18_REG_DMUX_NUM_PORT_0_CONTROL 0xd5a000
-#ifdef HAVE_MXL500X
-static struct mxl500x_config hauppauge_hvr1600_tuner = {
- .delsys = MXL500x_MODE_ATSC,
- .octf = MXL500x_OCTF_CH,
- .xtal_freq = 16000000,
- .iflo_freq = 5380000,
- .ref_freq = 322800000,
- .rssi_ena = MXL_RSSI_ENABLE,
- .addr = 0xC6 >> 1,
+static struct mxl5005s_config hauppauge_hvr1600_tuner = {
+ .i2c_address = 0xC6 >> 1,
+ .if_freq = IF_FREQ_5380000HZ,
+ .xtal_freq = CRYSTAL_FREQ_16000000HZ,
+ .agc_mode = MXL_SINGLE_AGC,
+ .tracking_filter = MXL_TF_C_H,
+ .rssi_enable = MXL_RSSI_ENABLE,
+ .cap_select = MXL_CAP_SEL_ENABLE,
+ .div_out = MXL_DIV_OUT_4,
+ .clock_out = MXL_CLOCK_OUT_DISABLE,
+ .output_load = MXL5005S_IF_OUTPUT_LOAD_200_OHM,
+ .top = MXL5005S_TOP_25P2,
+ .mod_mode = MXL_DIGITAL_MODE,
+ .if_mode = MXL_ZERO_IF,
+ .AgcMasterByte = 0x00,
};
static struct s5h1409_config hauppauge_hvr1600_config = {
@@ -55,7 +57,6 @@
.mpeg_timing = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK
};
-#endif
static int dvb_register(struct cx18_stream *stream);
@@ -252,21 +253,18 @@
int ret = 0;
switch (cx->card->type) {
-/* Wait until the MXL500X driver is merged */
-#ifdef HAVE_MXL500X
case CX18_CARD_HVR_1600_ESMT:
case CX18_CARD_HVR_1600_SAMSUNG:
dvb->fe = dvb_attach(s5h1409_attach,
&hauppauge_hvr1600_config,
&cx->i2c_adap[0]);
if (dvb->fe != NULL) {
- dvb_attach(mxl500x_attach, dvb->fe,
- &hauppauge_hvr1600_tuner,
- &cx->i2c_adap[0]);
+ dvb_attach(mxl5005s_attach, dvb->fe,
+ &cx->i2c_adap[0],
+ &hauppauge_hvr1600_tuner);
ret = 0;
}
break;
-#endif
default:
/* No Digital Tv Support */
break;
diff --git a/drivers/media/video/cx18/cx18-fileops.c b/drivers/media/video/cx18/cx18-fileops.c
index 6930306..1e537fe 100644
--- a/drivers/media/video/cx18/cx18-fileops.c
+++ b/drivers/media/video/cx18/cx18-fileops.c
@@ -39,7 +39,7 @@
associated VBI streams are also automatically claimed.
Possible error returns: -EBUSY if someone else has claimed
the stream or 0 on success. */
-int cx18_claim_stream(struct cx18_open_id *id, int type)
+static int cx18_claim_stream(struct cx18_open_id *id, int type)
{
struct cx18 *cx = id->cx;
struct cx18_stream *s = &cx->streams[type];
@@ -87,7 +87,7 @@
/* This function releases a previously claimed stream. It will take into
account associated VBI streams. */
-void cx18_release_stream(struct cx18_stream *s)
+static void cx18_release_stream(struct cx18_stream *s)
{
struct cx18 *cx = s->cx;
struct cx18_stream *s_vbi;
@@ -318,7 +318,7 @@
size_t tot_written = 0;
int single_frame = 0;
- if (atomic_read(&cx->capturing) == 0 && s->id == -1) {
+ if (atomic_read(&cx->ana_capturing) == 0 && s->id == -1) {
/* shouldn't happen */
CX18_DEBUG_WARN("Stream %s not initialized before read\n",
s->name);
@@ -361,7 +361,8 @@
cx18_enqueue(s, buf, &s->q_free);
cx18_vapi(cx, CX18_CPU_DE_SET_MDL, 5,
s->handle,
- (void *)&cx->scb->cpu_mdl[buf->id] - cx->enc_mem,
+ (void __iomem *)&cx->scb->cpu_mdl[buf->id] -
+ cx->enc_mem,
1, buf->id, s->buf_size);
} else
cx18_enqueue(s, buf, &s->q_io);
@@ -581,7 +582,7 @@
cx18_call_i2c_clients(cx, VIDIOC_S_STD, &cx->std);
/* Select correct audio input (i.e. TV tuner or Line in) */
cx18_audio_set_io(cx);
- if (atomic_read(&cx->capturing) > 0) {
+ if (atomic_read(&cx->ana_capturing) > 0) {
/* Undo video mute */
cx18_vapi(cx, CX18_CPU_SET_VIDEO_MUTE, 2, s->handle,
cx->params.video_mute |
@@ -627,7 +628,7 @@
}
if (!test_bit(CX18_F_I_RADIO_USER, &cx->i_flags)) {
- if (atomic_read(&cx->capturing) > 0) {
+ if (atomic_read(&cx->ana_capturing) > 0) {
/* switching to radio while capture is
in progress is not polite */
cx18_release_stream(s);
@@ -662,6 +663,8 @@
for (x = 0; cx == NULL && x < cx18_cards_active; x++) {
/* find out which stream this open was on */
for (y = 0; y < CX18_MAX_STREAMS; y++) {
+ if (cx18_cards[x] == NULL)
+ continue;
s = &cx18_cards[x]->streams[y];
if (s->v4l2dev && s->v4l2dev->minor == minor) {
cx = cx18_cards[x];
@@ -692,7 +695,7 @@
void cx18_mute(struct cx18 *cx)
{
- if (atomic_read(&cx->capturing))
+ if (atomic_read(&cx->ana_capturing))
cx18_vapi(cx, CX18_CPU_SET_AUDIO_MUTE, 2,
cx18_find_handle(cx), 1);
CX18_DEBUG_INFO("Mute\n");
@@ -700,7 +703,7 @@
void cx18_unmute(struct cx18 *cx)
{
- if (atomic_read(&cx->capturing)) {
+ if (atomic_read(&cx->ana_capturing)) {
cx18_msleep_timeout(100, 0);
cx18_vapi(cx, CX18_CPU_SET_MISC_PARAMETERS, 2,
cx18_find_handle(cx), 12);
diff --git a/drivers/media/video/cx18/cx18-fileops.h b/drivers/media/video/cx18/cx18-fileops.h
index 16cdafb..46da028 100644
--- a/drivers/media/video/cx18/cx18-fileops.h
+++ b/drivers/media/video/cx18/cx18-fileops.h
@@ -34,12 +34,3 @@
void cx18_mute(struct cx18 *cx);
void cx18_unmute(struct cx18 *cx);
-/* Utilities */
-
-/* Try to claim a stream for the filehandle. Return 0 on success,
- -EBUSY if stream already claimed. Once a stream is claimed, it
- remains claimed until the associated filehandle is closed. */
-int cx18_claim_stream(struct cx18_open_id *id, int type);
-
-/* Release a previously claimed stream. */
-void cx18_release_stream(struct cx18_stream *s);
diff --git a/drivers/media/video/cx18/cx18-gpio.c b/drivers/media/video/cx18/cx18-gpio.c
index 19253e6..ceb6365 100644
--- a/drivers/media/video/cx18/cx18-gpio.c
+++ b/drivers/media/video/cx18/cx18-gpio.c
@@ -44,31 +44,57 @@
* gpio13: cs5345 reset pin
*/
+static void gpio_write(struct cx18 *cx)
+{
+ u32 dir = cx->gpio_dir;
+ u32 val = cx->gpio_val;
+
+ write_reg((dir & 0xffff) << 16, CX18_REG_GPIO_DIR1);
+ write_reg(((dir & 0xffff) << 16) | (val & 0xffff),
+ CX18_REG_GPIO_OUT1);
+ write_reg(dir & 0xffff0000, CX18_REG_GPIO_DIR2);
+ write_reg((dir & 0xffff0000) | ((val & 0xffff0000) >> 16),
+ CX18_REG_GPIO_OUT2);
+}
+
void cx18_gpio_init(struct cx18 *cx)
{
- if (cx->card->gpio_init.direction == 0)
+ cx->gpio_dir = cx->card->gpio_init.direction;
+ cx->gpio_val = cx->card->gpio_init.initial_value;
+
+ if (cx->card->tuners[0].tuner == TUNER_XC2028) {
+ cx->gpio_dir |= 1 << cx->card->xceive_pin;
+ cx->gpio_val |= 1 << cx->card->xceive_pin;
+ }
+
+ if (cx->gpio_dir == 0)
return;
- CX18_DEBUG_INFO("GPIO initial dir: %08x out: %08x\n",
- read_reg(CX18_REG_GPIO_DIR1), read_reg(CX18_REG_GPIO_OUT1));
+ CX18_DEBUG_INFO("GPIO initial dir: %08x/%08x out: %08x/%08x\n",
+ read_reg(CX18_REG_GPIO_DIR1), read_reg(CX18_REG_GPIO_DIR2),
+ read_reg(CX18_REG_GPIO_OUT1), read_reg(CX18_REG_GPIO_OUT2));
- /* init output data then direction */
- write_reg(cx->card->gpio_init.direction << 16, CX18_REG_GPIO_DIR1);
- write_reg(0, CX18_REG_GPIO_DIR2);
- write_reg((cx->card->gpio_init.direction << 16) |
- cx->card->gpio_init.initial_value, CX18_REG_GPIO_OUT1);
- write_reg(0, CX18_REG_GPIO_OUT2);
+ gpio_write(cx);
}
/* Xceive tuner reset function */
int cx18_reset_tuner_gpio(void *dev, int cmd, int value)
{
struct i2c_algo_bit_data *algo = dev;
- struct cx18 *cx = algo->data;
-/* int curdir, curout;*/
+ struct cx18_i2c_algo_callback_data *cb_data = algo->data;
+ struct cx18 *cx = cb_data->cx;
if (cmd != XC2028_TUNER_RESET)
return 0;
CX18_DEBUG_INFO("Resetting tuner\n");
+
+ cx->gpio_val &= ~(1 << cx->card->xceive_pin);
+
+ gpio_write(cx);
+ schedule_timeout_interruptible(msecs_to_jiffies(1));
+
+ cx->gpio_val |= 1 << cx->card->xceive_pin;
+ gpio_write(cx);
+ schedule_timeout_interruptible(msecs_to_jiffies(1));
return 0;
}
diff --git a/drivers/media/video/cx18/cx18-i2c.c b/drivers/media/video/cx18/cx18-i2c.c
index 18c88d1..1d6c51a 100644
--- a/drivers/media/video/cx18/cx18-i2c.c
+++ b/drivers/media/video/cx18/cx18-i2c.c
@@ -25,6 +25,7 @@
#include "cx18-cards.h"
#include "cx18-gpio.h"
#include "cx18-av-core.h"
+#include "cx18-i2c.h"
#include <media/ir-kbd-i2c.h>
@@ -73,7 +74,7 @@
};
/* This array should match the CX18_HW_ defines */
-static const char * const hw_drivernames[] = {
+static const char * const hw_devicenames[] = {
"tuner",
"tveeprom",
"cs5345",
@@ -94,8 +95,7 @@
id = hw_driverids[idx];
bus = hw_bus[idx];
memset(&info, 0, sizeof(info));
- strlcpy(info.driver_name, hw_drivernames[idx],
- sizeof(info.driver_name));
+ strlcpy(info.type, hw_devicenames[idx], sizeof(info.type));
info.addr = hw_addrs[idx];
for (i = 0; i < I2C_CLIENTS_MAX; i++)
if (cx->i2c_clients[i] == NULL)
@@ -278,7 +278,7 @@
for (i = 0; i < ARRAY_SIZE(hw_driverids); i++)
if (hw_driverids[i] == id)
- return hw_drivernames[i];
+ return hw_devicenames[i];
return "unknown device";
}
@@ -289,7 +289,7 @@
for (i = 0; i < ARRAY_SIZE(hw_driverids); i++)
if (1 << i == hw)
- return hw_drivernames[i];
+ return hw_devicenames[i];
return "unknown device";
}
diff --git a/drivers/media/video/cx18/cx18-ioctl.c b/drivers/media/video/cx18/cx18-ioctl.c
index dbdcb86..4151f1e 100644
--- a/drivers/media/video/cx18/cx18-ioctl.c
+++ b/drivers/media/video/cx18/cx18-ioctl.c
@@ -247,7 +247,7 @@
if (!set_fmt || (cx->params.width == w && cx->params.height == h))
return 0;
- if (atomic_read(&cx->capturing) > 0)
+ if (atomic_read(&cx->ana_capturing) > 0)
return -EBUSY;
cx->params.width = w;
@@ -264,7 +264,7 @@
if (fmt->type == V4L2_BUF_TYPE_VBI_CAPTURE) {
if (set_fmt && streamtype == CX18_ENC_STREAM_TYPE_VBI &&
cx->vbi.sliced_in->service_set &&
- atomic_read(&cx->capturing) > 0)
+ atomic_read(&cx->ana_capturing) > 0)
return -EBUSY;
if (set_fmt) {
cx->vbi.sliced_in->service_set = 0;
@@ -293,7 +293,7 @@
return 0;
if (set == 0)
return -EINVAL;
- if (atomic_read(&cx->capturing) > 0 && cx->vbi.sliced_in->service_set == 0)
+ if (atomic_read(&cx->ana_capturing) > 0 && cx->vbi.sliced_in->service_set == 0)
return -EBUSY;
cx18_av_cmd(cx, VIDIOC_S_FMT, fmt);
memcpy(cx->vbi.sliced_in, vbifmt, sizeof(*cx->vbi.sliced_in));
@@ -581,7 +581,7 @@
break;
if (test_bit(CX18_F_I_RADIO_USER, &cx->i_flags) ||
- atomic_read(&cx->capturing) > 0) {
+ atomic_read(&cx->ana_capturing) > 0) {
/* Switching standard would turn off the radio or mess
with already running streams, prevent that by
returning EBUSY. */
@@ -677,7 +677,7 @@
enc->flags = 0;
if (try)
return 0;
- if (!atomic_read(&cx->capturing))
+ if (!atomic_read(&cx->ana_capturing))
return -EPERM;
if (test_and_set_bit(CX18_F_I_ENC_PAUSED, &cx->i_flags))
return 0;
@@ -689,7 +689,7 @@
enc->flags = 0;
if (try)
return 0;
- if (!atomic_read(&cx->capturing))
+ if (!atomic_read(&cx->ana_capturing))
return -EPERM;
if (!test_and_clear_bit(CX18_F_I_ENC_PAUSED, &cx->i_flags))
return 0;
diff --git a/drivers/media/video/cx18/cx18-irq.c b/drivers/media/video/cx18/cx18-irq.c
index 6e14f8b..25114a5 100644
--- a/drivers/media/video/cx18/cx18-irq.c
+++ b/drivers/media/video/cx18/cx18-irq.c
@@ -75,7 +75,7 @@
cx18_buf_sync_for_device(s, buf);
cx18_vapi(cx, CX18_CPU_DE_SET_MDL, 5, s->handle,
- (void *)&cx->scb->cpu_mdl[buf->id] - cx->enc_mem,
+ (void __iomem *)&cx->scb->cpu_mdl[buf->id] - cx->enc_mem,
1, buf->id, s->buf_size);
} else
set_bit(CX18_F_B_NEED_BUF_SWAP, &buf->b_flags);
@@ -161,13 +161,15 @@
*/
if (sw2) {
- if (sw2 & (cx->scb->cpu2hpu_irq_ack | cx->scb->cpu2epu_irq_ack))
+ if (sw2 & (readl(&cx->scb->cpu2hpu_irq_ack) |
+ readl(&cx->scb->cpu2epu_irq_ack)))
wake_up(&cx->mb_cpu_waitq);
- if (sw2 & (cx->scb->apu2hpu_irq_ack | cx->scb->apu2epu_irq_ack))
+ if (sw2 & (readl(&cx->scb->apu2hpu_irq_ack) |
+ readl(&cx->scb->apu2epu_irq_ack)))
wake_up(&cx->mb_apu_waitq);
- if (sw2 & cx->scb->epu2hpu_irq_ack)
+ if (sw2 & readl(&cx->scb->epu2hpu_irq_ack))
wake_up(&cx->mb_epu_waitq);
- if (sw2 & cx->scb->hpu2epu_irq_ack)
+ if (sw2 & readl(&cx->scb->hpu2epu_irq_ack))
wake_up(&cx->mb_hpu_waitq);
}
diff --git a/drivers/media/video/cx18/cx18-mailbox.c b/drivers/media/video/cx18/cx18-mailbox.c
index 0c5f328..2a5ccef 100644
--- a/drivers/media/video/cx18/cx18-mailbox.c
+++ b/drivers/media/video/cx18/cx18-mailbox.c
@@ -94,10 +94,10 @@
return NULL;
}
-static struct cx18_mailbox *cx18_mb_is_complete(struct cx18 *cx, int rpu,
+static struct cx18_mailbox __iomem *cx18_mb_is_complete(struct cx18 *cx, int rpu,
u32 *state, u32 *irq, u32 *req)
{
- struct cx18_mailbox *mb = NULL;
+ struct cx18_mailbox __iomem *mb = NULL;
int wait_count = 0;
u32 ack;
@@ -142,7 +142,7 @@
long cx18_mb_ack(struct cx18 *cx, const struct cx18_mailbox *mb)
{
const struct cx18_api_info *info = find_api_info(mb->cmd);
- struct cx18_mailbox *ack_mb;
+ struct cx18_mailbox __iomem *ack_mb;
u32 ack_irq;
u8 rpu = CPU;
@@ -182,7 +182,7 @@
{
const struct cx18_api_info *info = find_api_info(cmd);
u32 state = 0, irq = 0, req, oldreq, err;
- struct cx18_mailbox *mb;
+ struct cx18_mailbox __iomem *mb;
wait_queue_head_t *waitq;
int timeout = 100;
int cnt = 0;
diff --git a/drivers/media/video/cx18/cx18-queue.c b/drivers/media/video/cx18/cx18-queue.c
index 65af1bb..6990b77 100644
--- a/drivers/media/video/cx18/cx18-queue.c
+++ b/drivers/media/video/cx18/cx18-queue.c
@@ -26,17 +26,6 @@
#include "cx18-queue.h"
#include "cx18-scb.h"
-int cx18_buf_copy_from_user(struct cx18_stream *s, struct cx18_buffer *buf,
- const char __user *src, int copybytes)
-{
- if (s->buf_size - buf->bytesused < copybytes)
- copybytes = s->buf_size - buf->bytesused;
- if (copy_from_user(buf->buf + buf->bytesused, src, copybytes))
- return -EFAULT;
- buf->bytesused += copybytes;
- return copybytes;
-}
-
void cx18_buf_swap(struct cx18_buffer *buf)
{
int i;
@@ -159,8 +148,9 @@
-ENOMEM is returned if the buffers could not be obtained, 0 if all
buffers where obtained from the 'from' list and if non-zero then
the number of stolen buffers is returned. */
-int cx18_queue_move(struct cx18_stream *s, struct cx18_queue *from,
- struct cx18_queue *steal, struct cx18_queue *to, int needed_bytes)
+static int cx18_queue_move(struct cx18_stream *s, struct cx18_queue *from,
+ struct cx18_queue *steal, struct cx18_queue *to,
+ int needed_bytes)
{
unsigned long flags;
int rc = 0;
@@ -239,12 +229,12 @@
/* allocate stream buffers. Initially all buffers are in q_free. */
for (i = 0; i < s->buffers; i++) {
- struct cx18_buffer *buf =
- kzalloc(sizeof(struct cx18_buffer), GFP_KERNEL);
+ struct cx18_buffer *buf = kzalloc(sizeof(struct cx18_buffer),
+ GFP_KERNEL|__GFP_NOWARN);
if (buf == NULL)
break;
- buf->buf = kmalloc(s->buf_size, GFP_KERNEL);
+ buf->buf = kmalloc(s->buf_size, GFP_KERNEL|__GFP_NOWARN);
if (buf->buf == NULL) {
kfree(buf);
break;
diff --git a/drivers/media/video/cx18/cx18-queue.h b/drivers/media/video/cx18/cx18-queue.h
index f86c8a6..91423b9 100644
--- a/drivers/media/video/cx18/cx18-queue.h
+++ b/drivers/media/video/cx18/cx18-queue.h
@@ -39,8 +39,6 @@
s->buf_size, s->dma);
}
-int cx18_buf_copy_from_user(struct cx18_stream *s, struct cx18_buffer *buf,
- const char __user *src, int copybytes);
void cx18_buf_swap(struct cx18_buffer *buf);
/* cx18_queue utility functions */
@@ -48,8 +46,6 @@
void cx18_enqueue(struct cx18_stream *s, struct cx18_buffer *buf,
struct cx18_queue *q);
struct cx18_buffer *cx18_dequeue(struct cx18_stream *s, struct cx18_queue *q);
-int cx18_queue_move(struct cx18_stream *s, struct cx18_queue *from,
- struct cx18_queue *steal, struct cx18_queue *to, int needed_bytes);
struct cx18_buffer *cx18_queue_find_buf(struct cx18_stream *s, u32 id,
u32 bytesused);
void cx18_flush_queues(struct cx18_stream *s);
diff --git a/drivers/media/video/cx18/cx18-streams.c b/drivers/media/video/cx18/cx18-streams.c
index afb141b..1b921a3 100644
--- a/drivers/media/video/cx18/cx18-streams.c
+++ b/drivers/media/video/cx18/cx18-streams.c
@@ -36,12 +36,13 @@
#define CX18_DSP0_INTERRUPT_MASK 0xd0004C
static struct file_operations cx18_v4l2_enc_fops = {
- .owner = THIS_MODULE,
- .read = cx18_v4l2_read,
- .open = cx18_v4l2_open,
- .ioctl = cx18_v4l2_ioctl,
- .release = cx18_v4l2_close,
- .poll = cx18_v4l2_enc_poll,
+ .owner = THIS_MODULE,
+ .read = cx18_v4l2_read,
+ .open = cx18_v4l2_open,
+ .ioctl = cx18_v4l2_ioctl,
+ .compat_ioctl = v4l_compat_ioctl32,
+ .release = cx18_v4l2_close,
+ .poll = cx18_v4l2_enc_poll,
};
/* offset from 0 to register ts v4l2 minors on */
@@ -218,7 +219,7 @@
return 0;
/* One or more streams could not be initialized. Clean 'em all up. */
- cx18_streams_cleanup(cx);
+ cx18_streams_cleanup(cx, 0);
return -ENOMEM;
}
@@ -296,12 +297,12 @@
return 0;
/* One or more streams could not be initialized. Clean 'em all up. */
- cx18_streams_cleanup(cx);
+ cx18_streams_cleanup(cx, 1);
return -ENOMEM;
}
/* Unregister v4l2 devices */
-void cx18_streams_cleanup(struct cx18 *cx)
+void cx18_streams_cleanup(struct cx18 *cx, int unregister)
{
struct video_device *vdev;
int type;
@@ -319,8 +320,11 @@
cx18_stream_free(&cx->streams[type]);
- /* Unregister device */
- video_unregister_device(vdev);
+ /* Unregister or release device */
+ if (unregister)
+ video_unregister_device(vdev);
+ else
+ video_device_release(vdev);
}
}
@@ -440,7 +444,7 @@
s->handle = data[0];
cx18_vapi(cx, CX18_CPU_SET_CHANNEL_TYPE, 2, s->handle, captype);
- if (atomic_read(&cx->capturing) == 0 && !ts) {
+ if (atomic_read(&cx->ana_capturing) == 0 && !ts) {
/* Stuff from Windows, we don't know what it is */
cx18_vapi(cx, CX18_CPU_SET_VER_CROP_LINE, 2, s->handle, 0);
cx18_vapi(cx, CX18_CPU_SET_MISC_PARAMETERS, 3, s->handle, 3, 1);
@@ -463,14 +467,14 @@
cx2341x_update(cx, cx18_api_func, NULL, &cx->params);
}
- if (atomic_read(&cx->capturing) == 0) {
+ if (atomic_read(&cx->tot_capturing) == 0) {
clear_bit(CX18_F_I_EOS, &cx->i_flags);
write_reg(7, CX18_DSP0_INTERRUPT_MASK);
}
cx18_vapi(cx, CX18_CPU_DE_SET_MDL_ACK, 3, s->handle,
- (void *)&cx->scb->cpu_mdl_ack[s->type][0] - cx->enc_mem,
- (void *)&cx->scb->cpu_mdl_ack[s->type][1] - cx->enc_mem);
+ (void __iomem *)&cx->scb->cpu_mdl_ack[s->type][0] - cx->enc_mem,
+ (void __iomem *)&cx->scb->cpu_mdl_ack[s->type][1] - cx->enc_mem);
list_for_each(p, &s->q_free.list) {
struct cx18_buffer *buf = list_entry(p, struct cx18_buffer, list);
@@ -478,8 +482,8 @@
writel(buf->dma_handle, &cx->scb->cpu_mdl[buf->id].paddr);
writel(s->buf_size, &cx->scb->cpu_mdl[buf->id].length);
cx18_vapi(cx, CX18_CPU_DE_SET_MDL, 5, s->handle,
- (void *)&cx->scb->cpu_mdl[buf->id] - cx->enc_mem, 1,
- buf->id, s->buf_size);
+ (void __iomem *)&cx->scb->cpu_mdl[buf->id] - cx->enc_mem,
+ 1, buf->id, s->buf_size);
}
/* begin_capture */
if (cx18_vapi(cx, CX18_CPU_CAPTURE_START, 1, s->handle)) {
@@ -489,7 +493,9 @@
}
/* you're live! sit back and await interrupts :) */
- atomic_inc(&cx->capturing);
+ if (!ts)
+ atomic_inc(&cx->ana_capturing);
+ atomic_inc(&cx->tot_capturing);
return 0;
}
@@ -520,7 +526,7 @@
CX18_DEBUG_INFO("Stop Capture\n");
- if (atomic_read(&cx->capturing) == 0)
+ if (atomic_read(&cx->tot_capturing) == 0)
return 0;
if (s->type == CX18_ENC_STREAM_TYPE_MPG)
@@ -534,7 +540,9 @@
CX18_INFO("ignoring gop_end: not (yet?) supported by the firmware\n");
}
- atomic_dec(&cx->capturing);
+ if (s->type != CX18_ENC_STREAM_TYPE_TS)
+ atomic_dec(&cx->ana_capturing);
+ atomic_dec(&cx->tot_capturing);
/* Clear capture and no-read bits */
clear_bit(CX18_F_S_STREAMING, &s->s_flags);
@@ -542,7 +550,7 @@
cx18_vapi(cx, CX18_DESTROY_TASK, 1, s->handle);
s->handle = 0xffffffff;
- if (atomic_read(&cx->capturing) > 0)
+ if (atomic_read(&cx->tot_capturing) > 0)
return 0;
write_reg(5, CX18_DSP0_INTERRUPT_MASK);
diff --git a/drivers/media/video/cx18/cx18-streams.h b/drivers/media/video/cx18/cx18-streams.h
index 8c7ba7d..f327e94 100644
--- a/drivers/media/video/cx18/cx18-streams.h
+++ b/drivers/media/video/cx18/cx18-streams.h
@@ -24,7 +24,7 @@
u32 cx18_find_handle(struct cx18 *cx);
int cx18_streams_setup(struct cx18 *cx);
int cx18_streams_register(struct cx18 *cx);
-void cx18_streams_cleanup(struct cx18 *cx);
+void cx18_streams_cleanup(struct cx18 *cx, int unregister);
/* Capture related */
int cx18_start_v4l2_encode_stream(struct cx18_stream *s);
diff --git a/drivers/media/video/cx23885/Kconfig b/drivers/media/video/cx23885/Kconfig
index cadf936..7bf14c9 100644
--- a/drivers/media/video/cx23885/Kconfig
+++ b/drivers/media/video/cx23885/Kconfig
@@ -1,18 +1,20 @@
config VIDEO_CX23885
tristate "Conexant cx23885 (2388x successor) support"
depends on DVB_CORE && VIDEO_DEV && PCI && I2C && INPUT
+ depends on HOTPLUG # due to FW_LOADER
select I2C_ALGOBIT
select FW_LOADER
select VIDEO_BTCX
- select MEDIA_TUNER
+ select VIDEO_TUNER
select VIDEO_TVEEPROM
select VIDEO_IR
select VIDEOBUF_DVB
select VIDEO_CX25840
+ select VIDEO_CX2341X
+ select DVB_DIB7000P if !DVB_FE_CUSTOMISE
select MEDIA_TUNER_MT2131 if !DVB_FE_CUSTOMISE
select DVB_S5H1409 if !DVB_FE_CUSTOMISE
select DVB_LGDT330X if !DVB_FE_CUSTOMISE
- select DVB_PLL if !DVB_FE_CUSTOMISE
select MEDIA_TUNER_XC2028 if !DVB_FE_CUSTOMIZE
select MEDIA_TUNER_TDA8290 if !DVB_FE_CUSTOMIZE
select MEDIA_TUNER_TDA18271 if !DVB_FE_CUSTOMIZE
diff --git a/drivers/media/video/cx23885/cx23885-cards.c b/drivers/media/video/cx23885/cx23885-cards.c
index 6ebf587..20e05f2 100644
--- a/drivers/media/video/cx23885/cx23885-cards.c
+++ b/drivers/media/video/cx23885/cx23885-cards.c
@@ -200,6 +200,10 @@
.card = CX23885_BOARD_HAUPPAUGE_HVR1200,
}, {
.subvendor = 0x0070,
+ .subdevice = 0x71d3,
+ .card = CX23885_BOARD_HAUPPAUGE_HVR1200,
+ }, {
+ .subvendor = 0x0070,
.subdevice = 0x8101,
.card = CX23885_BOARD_HAUPPAUGE_HVR1700,
}, {
@@ -245,6 +249,33 @@
/* Make sure we support the board model */
switch (tv.model)
{
+ case 71009:
+ /* WinTV-HVR1200 (PCIe, Retail, full height)
+ * DVB-T and basic analog */
+ case 71359:
+ /* WinTV-HVR1200 (PCIe, OEM, half height)
+ * DVB-T and basic analog */
+ case 71439:
+ /* WinTV-HVR1200 (PCIe, OEM, half height)
+ * DVB-T and basic analog */
+ case 71449:
+ /* WinTV-HVR1200 (PCIe, OEM, full height)
+ * DVB-T and basic analog */
+ case 71939:
+ /* WinTV-HVR1200 (PCIe, OEM, half height)
+ * DVB-T and basic analog */
+ case 71949:
+ /* WinTV-HVR1200 (PCIe, OEM, full height)
+ * DVB-T and basic analog */
+ case 71959:
+ /* WinTV-HVR1200 (PCIe, OEM, full height)
+ * DVB-T and basic analog */
+ case 71979:
+ /* WinTV-HVR1200 (PCIe, OEM, half height)
+ * DVB-T and basic analog */
+ case 71999:
+ /* WinTV-HVR1200 (PCIe, OEM, full height)
+ * DVB-T and basic analog */
case 76601: /* WinTV-HVR1800lp (PCIe, Retail, No IR, Dual channel ATSC and MPEG2 HW Encoder */
case 77001: /* WinTV-HVR1500 (Express Card, OEM, No IR, ATSC and Basic analog */
case 77011: /* WinTV-HVR1500 (Express Card, Retail, No IR, ATSC and Basic analog */
@@ -263,8 +294,11 @@
case 80019:
/* WinTV-HVR1400 (Express Card, Retail, IR,
* DVB-T and Basic analog */
+ case 81509:
+ /* WinTV-HVR1700 (PCIe, OEM, No IR, half height)
+ * DVB-T and MPEG2 HW Encoder */
case 81519:
- /* WinTV-HVR1700 (PCIe, Retail, No IR, half height,
+ /* WinTV-HVR1700 (PCIe, OEM, No IR, full height)
* DVB-T and MPEG2 HW Encoder */
break;
default:
diff --git a/drivers/media/video/cx23885/cx23885-core.c b/drivers/media/video/cx23885/cx23885-core.c
index f24abcd..c4cc2f3 100644
--- a/drivers/media/video/cx23885/cx23885-core.c
+++ b/drivers/media/video/cx23885/cx23885-core.c
@@ -823,7 +823,7 @@
iounmap(dev->lmmio);
}
-static u32* cx23885_risc_field(u32 *rp, struct scatterlist *sglist,
+static __le32* cx23885_risc_field(__le32 *rp, struct scatterlist *sglist,
unsigned int offset, u32 sync_line,
unsigned int bpl, unsigned int padding,
unsigned int lines)
@@ -883,7 +883,7 @@
unsigned int padding, unsigned int lines)
{
u32 instructions, fields;
- u32 *rp;
+ __le32 *rp;
int rc;
fields = 0;
@@ -924,7 +924,7 @@
unsigned int lines)
{
u32 instructions;
- u32 *rp;
+ __le32 *rp;
int rc;
/* estimate risc mem: worst case is one write per page border +
@@ -951,7 +951,7 @@
int cx23885_risc_stopper(struct pci_dev *pci, struct btcx_riscmem *risc,
u32 reg, u32 mask, u32 value)
{
- u32 *rp;
+ __le32 *rp;
int rc;
if ((rc = btcx_riscmem_alloc(pci, risc, 4*16)) < 0)
diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c
index f056497..022aa39 100644
--- a/drivers/media/video/cx23885/cx23885-dvb.c
+++ b/drivers/media/video/cx23885/cx23885-dvb.c
@@ -37,7 +37,6 @@
#include "lgdt330x.h"
#include "xc5000.h"
#include "tda10048.h"
-#include "dvb-pll.h"
#include "tuner-xc2028.h"
#include "tuner-simple.h"
#include "dib7000p.h"
@@ -385,12 +384,10 @@
port->dvb.frontend = dvb_attach(s5h1409_attach,
&hauppauge_hvr1500q_config,
&dev->i2c_bus[0].i2c_adap);
- if (port->dvb.frontend != NULL) {
- hauppauge_hvr1500q_tunerconfig.priv = i2c_bus;
+ if (port->dvb.frontend != NULL)
dvb_attach(xc5000_attach, port->dvb.frontend,
&i2c_bus->i2c_adap,
- &hauppauge_hvr1500q_tunerconfig);
- }
+ &hauppauge_hvr1500q_tunerconfig, i2c_bus);
break;
case CX23885_BOARD_HAUPPAUGE_HVR1500:
i2c_bus = &dev->i2c_bus[1];
diff --git a/drivers/media/video/cx25840/Kconfig b/drivers/media/video/cx25840/Kconfig
index 7cf29a0..448f4cd 100644
--- a/drivers/media/video/cx25840/Kconfig
+++ b/drivers/media/video/cx25840/Kconfig
@@ -1,6 +1,7 @@
config VIDEO_CX25840
tristate "Conexant CX2584x audio/video decoders"
depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
+ depends on HOTPLUG # due to FW_LOADER
select FW_LOADER
---help---
Support for the Conexant CX2584x audio/video decoders.
diff --git a/drivers/media/video/cx25840/cx25840-core.c b/drivers/media/video/cx25840/cx25840-core.c
index 8882381..607efdc 100644
--- a/drivers/media/video/cx25840/cx25840-core.c
+++ b/drivers/media/video/cx25840/cx25840-core.c
@@ -1284,10 +1284,17 @@
return 0;
}
+static const struct i2c_device_id cx25840_id[] = {
+ { "cx25840", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, cx25840_id);
+
static struct v4l2_i2c_driver_data v4l2_i2c_data = {
.name = "cx25840",
.driverid = I2C_DRIVERID_CX25840,
.command = cx25840_command,
.probe = cx25840_probe,
.remove = cx25840_remove,
+ .id_table = cx25840_id,
};
diff --git a/drivers/media/video/cx88/Kconfig b/drivers/media/video/cx88/Kconfig
index b0d7d6a..10e20d8 100644
--- a/drivers/media/video/cx88/Kconfig
+++ b/drivers/media/video/cx88/Kconfig
@@ -2,10 +2,9 @@
tristate "Conexant 2388x (bt878 successor) support"
depends on VIDEO_DEV && PCI && I2C && INPUT
select I2C_ALGOBIT
- select FW_LOADER
select VIDEO_BTCX
select VIDEOBUF_DMA_SG
- select MEDIA_TUNER
+ select VIDEO_TUNER
select VIDEO_TVEEPROM
select VIDEO_IR
select VIDEO_WM8775 if VIDEO_HELPER_CHIPS_AUTO
@@ -34,8 +33,9 @@
config VIDEO_CX88_BLACKBIRD
tristate "Blackbird MPEG encoder support (cx2388x + cx23416)"
- depends on VIDEO_CX88
+ depends on VIDEO_CX88 && HOTPLUG
select VIDEO_CX2341X
+ select FW_LOADER
---help---
This adds support for MPEG encoder cards based on the
Blackbird reference design, using the Conexant 2388x
diff --git a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c
index aeba26d..fa6d398 100644
--- a/drivers/media/video/cx88/cx88-cards.c
+++ b/drivers/media/video/cx88/cx88-cards.c
@@ -1493,10 +1493,16 @@
},
},
[CX88_BOARD_POWERCOLOR_REAL_ANGEL] = {
- .name = "PowerColor Real Angel 330",
+ .name = "PowerColor RA330", /* Long names may confuse LIRC. */
.tuner_type = TUNER_XC2028,
.tuner_addr = 0x61,
.input = { {
+ .type = CX88_VMUX_DEBUG,
+ .vmux = 3, /* Due to the way the cx88 driver is written, */
+ .gpio0 = 0x00ff, /* there is no way to deactivate audio pass- */
+ .gpio1 = 0xf39d, /* through without this entry. Furthermore, if */
+ .gpio3 = 0x0000, /* the TV mux entry is first, you get audio */
+ }, { /* from the tuner on boot for a little while. */
.type = CX88_VMUX_TELEVISION,
.vmux = 0,
.gpio0 = 0x00ff,
@@ -2424,8 +2430,9 @@
switch (core->boardnr) {
case CX88_BOARD_POWERCOLOR_REAL_ANGEL:
- /* Doesn't work with firmware version 2.7 */
- ctl->fname = "xc3028-v25.fw";
+ /* Now works with firmware version 2.7 */
+ if (core->i2c_algo.udelay < 16)
+ core->i2c_algo.udelay = 16;
break;
case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PRO:
ctl->scode_table = XC3028_FE_ZARLINK456;
diff --git a/drivers/media/video/cx88/cx88-core.c b/drivers/media/video/cx88/cx88-core.c
index c4d1aff..60eeda3 100644
--- a/drivers/media/video/cx88/cx88-core.c
+++ b/drivers/media/video/cx88/cx88-core.c
@@ -70,7 +70,7 @@
/* @lpi: lines per IRQ, or 0 to not generate irqs. Note: IRQ to be
generated _after_ lpi lines are transferred. */
-static u32* cx88_risc_field(u32 *rp, struct scatterlist *sglist,
+static __le32* cx88_risc_field(__le32 *rp, struct scatterlist *sglist,
unsigned int offset, u32 sync_line,
unsigned int bpl, unsigned int padding,
unsigned int lines, unsigned int lpi)
@@ -130,7 +130,7 @@
unsigned int bpl, unsigned int padding, unsigned int lines)
{
u32 instructions,fields;
- u32 *rp;
+ __le32 *rp;
int rc;
fields = 0;
@@ -168,7 +168,7 @@
unsigned int lines, unsigned int lpi)
{
u32 instructions;
- u32 *rp;
+ __le32 *rp;
int rc;
/* estimate risc mem: worst case is one write per page border +
@@ -193,7 +193,7 @@
int cx88_risc_stopper(struct pci_dev *pci, struct btcx_riscmem *risc,
u32 reg, u32 mask, u32 value)
{
- u32 *rp;
+ __le32 *rp;
int rc;
if ((rc = btcx_riscmem_alloc(pci, risc, 4*16)) < 0)
diff --git a/drivers/media/video/cx88/cx88-dvb.c b/drivers/media/video/cx88/cx88-dvb.c
index 1c7fe68..d96173f 100644
--- a/drivers/media/video/cx88/cx88-dvb.c
+++ b/drivers/media/video/cx88/cx88-dvb.c
@@ -509,9 +509,6 @@
if (!fe) {
printk(KERN_ERR "%s/2: xc3028 attach failed\n",
dev->core->name);
- dvb_frontend_detach(dev->dvb.frontend);
- dvb_unregister_frontend(dev->dvb.frontend);
- dev->dvb.frontend = NULL;
return -EINVAL;
}
@@ -523,20 +520,23 @@
static int dvb_register(struct cx8802_dev *dev)
{
+ struct cx88_core *core = dev->core;
+
/* init struct videobuf_dvb */
- dev->dvb.name = dev->core->name;
+ dev->dvb.name = core->name;
dev->ts_gen_cntrl = 0x0c;
/* init frontend */
- switch (dev->core->boardnr) {
+ switch (core->boardnr) {
case CX88_BOARD_HAUPPAUGE_DVB_T1:
dev->dvb.frontend = dvb_attach(cx22702_attach,
&connexant_refboard_config,
- &dev->core->i2c_adap);
+ &core->i2c_adap);
if (dev->dvb.frontend != NULL) {
- dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61,
- &dev->core->i2c_adap,
- DVB_PLL_THOMSON_DTT759X);
+ if (!dvb_attach(dvb_pll_attach, dev->dvb.frontend,
+ 0x61, &core->i2c_adap,
+ DVB_PLL_THOMSON_DTT759X))
+ goto frontend_detach;
}
break;
case CX88_BOARD_TERRATEC_CINERGY_1400_DVB_T1:
@@ -545,11 +545,12 @@
case CX88_BOARD_WINFAST_DTV1000:
dev->dvb.frontend = dvb_attach(cx22702_attach,
&connexant_refboard_config,
- &dev->core->i2c_adap);
+ &core->i2c_adap);
if (dev->dvb.frontend != NULL) {
- dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x60,
- &dev->core->i2c_adap,
- DVB_PLL_THOMSON_DTT7579);
+ if (!dvb_attach(dvb_pll_attach, dev->dvb.frontend,
+ 0x60, &core->i2c_adap,
+ DVB_PLL_THOMSON_DTT7579))
+ goto frontend_detach;
}
break;
case CX88_BOARD_WINFAST_DTV2000H:
@@ -559,29 +560,32 @@
case CX88_BOARD_HAUPPAUGE_HVR3000:
dev->dvb.frontend = dvb_attach(cx22702_attach,
&hauppauge_hvr_config,
- &dev->core->i2c_adap);
+ &core->i2c_adap);
if (dev->dvb.frontend != NULL) {
- dvb_attach(simple_tuner_attach, dev->dvb.frontend,
- &dev->core->i2c_adap, 0x61,
- TUNER_PHILIPS_FMD1216ME_MK3);
+ if (!dvb_attach(simple_tuner_attach, dev->dvb.frontend,
+ &core->i2c_adap, 0x61,
+ TUNER_PHILIPS_FMD1216ME_MK3))
+ goto frontend_detach;
}
break;
case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PLUS:
dev->dvb.frontend = dvb_attach(mt352_attach,
&dvico_fusionhdtv,
- &dev->core->i2c_adap);
+ &core->i2c_adap);
if (dev->dvb.frontend != NULL) {
- dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x60,
- NULL, DVB_PLL_THOMSON_DTT7579);
+ if (!dvb_attach(dvb_pll_attach, dev->dvb.frontend,
+ 0x60, NULL, DVB_PLL_THOMSON_DTT7579))
+ goto frontend_detach;
break;
}
/* ZL10353 replaces MT352 on later cards */
dev->dvb.frontend = dvb_attach(zl10353_attach,
&dvico_fusionhdtv_plus_v1_1,
- &dev->core->i2c_adap);
+ &core->i2c_adap);
if (dev->dvb.frontend != NULL) {
- dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x60,
- NULL, DVB_PLL_THOMSON_DTT7579);
+ if (!dvb_attach(dvb_pll_attach, dev->dvb.frontend,
+ 0x60, NULL, DVB_PLL_THOMSON_DTT7579))
+ goto frontend_detach;
}
break;
case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL:
@@ -589,28 +593,31 @@
* compatible, with a slightly different MT352 AGC gain. */
dev->dvb.frontend = dvb_attach(mt352_attach,
&dvico_fusionhdtv_dual,
- &dev->core->i2c_adap);
+ &core->i2c_adap);
if (dev->dvb.frontend != NULL) {
- dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61,
- NULL, DVB_PLL_THOMSON_DTT7579);
+ if (!dvb_attach(dvb_pll_attach, dev->dvb.frontend,
+ 0x61, NULL, DVB_PLL_THOMSON_DTT7579))
+ goto frontend_detach;
break;
}
/* ZL10353 replaces MT352 on later cards */
dev->dvb.frontend = dvb_attach(zl10353_attach,
&dvico_fusionhdtv_plus_v1_1,
- &dev->core->i2c_adap);
+ &core->i2c_adap);
if (dev->dvb.frontend != NULL) {
- dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61,
- NULL, DVB_PLL_THOMSON_DTT7579);
+ if (!dvb_attach(dvb_pll_attach, dev->dvb.frontend,
+ 0x61, NULL, DVB_PLL_THOMSON_DTT7579))
+ goto frontend_detach;
}
break;
case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T1:
dev->dvb.frontend = dvb_attach(mt352_attach,
&dvico_fusionhdtv,
- &dev->core->i2c_adap);
+ &core->i2c_adap);
if (dev->dvb.frontend != NULL) {
- dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61,
- NULL, DVB_PLL_LG_Z201);
+ if (!dvb_attach(dvb_pll_attach, dev->dvb.frontend,
+ 0x61, NULL, DVB_PLL_LG_Z201))
+ goto frontend_detach;
}
break;
case CX88_BOARD_KWORLD_DVB_T:
@@ -618,10 +625,11 @@
case CX88_BOARD_ADSTECH_DVB_T_PCI:
dev->dvb.frontend = dvb_attach(mt352_attach,
&dntv_live_dvbt_config,
- &dev->core->i2c_adap);
+ &core->i2c_adap);
if (dev->dvb.frontend != NULL) {
- dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61,
- NULL, DVB_PLL_UNKNOWN_1);
+ if (!dvb_attach(dvb_pll_attach, dev->dvb.frontend,
+ 0x61, NULL, DVB_PLL_UNKNOWN_1))
+ goto frontend_detach;
}
break;
case CX88_BOARD_DNTV_LIVE_DVB_T_PRO:
@@ -630,32 +638,35 @@
dev->dvb.frontend = dvb_attach(mt352_attach, &dntv_live_dvbt_pro_config,
&dev->vp3054->adap);
if (dev->dvb.frontend != NULL) {
- dvb_attach(simple_tuner_attach, dev->dvb.frontend,
- &dev->core->i2c_adap, 0x61,
- TUNER_PHILIPS_FMD1216ME_MK3);
+ if (!dvb_attach(simple_tuner_attach, dev->dvb.frontend,
+ &core->i2c_adap, 0x61,
+ TUNER_PHILIPS_FMD1216ME_MK3))
+ goto frontend_detach;
}
#else
- printk(KERN_ERR "%s/2: built without vp3054 support\n", dev->core->name);
+ printk(KERN_ERR "%s/2: built without vp3054 support\n",
+ core->name);
#endif
break;
case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_HYBRID:
dev->dvb.frontend = dvb_attach(zl10353_attach,
&dvico_fusionhdtv_hybrid,
- &dev->core->i2c_adap);
+ &core->i2c_adap);
if (dev->dvb.frontend != NULL) {
- dvb_attach(simple_tuner_attach, dev->dvb.frontend,
- &dev->core->i2c_adap, 0x61,
- TUNER_THOMSON_FE6600);
+ if (!dvb_attach(simple_tuner_attach, dev->dvb.frontend,
+ &core->i2c_adap, 0x61,
+ TUNER_THOMSON_FE6600))
+ goto frontend_detach;
}
break;
case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PRO:
dev->dvb.frontend = dvb_attach(zl10353_attach,
&dvico_fusionhdtv_xc3028,
- &dev->core->i2c_adap);
+ &core->i2c_adap);
if (dev->dvb.frontend == NULL)
dev->dvb.frontend = dvb_attach(mt352_attach,
&dvico_fusionhdtv_mt352_xc3028,
- &dev->core->i2c_adap);
+ &core->i2c_adap);
/*
* On this board, the demod provides the I2C bus pullup.
* We must not permit gate_ctrl to be performed, or
@@ -668,19 +679,18 @@
break;
case CX88_BOARD_PCHDTV_HD3000:
dev->dvb.frontend = dvb_attach(or51132_attach, &pchdtv_hd3000,
- &dev->core->i2c_adap);
+ &core->i2c_adap);
if (dev->dvb.frontend != NULL) {
- dvb_attach(simple_tuner_attach, dev->dvb.frontend,
- &dev->core->i2c_adap, 0x61,
- TUNER_THOMSON_DTT761X);
+ if (!dvb_attach(simple_tuner_attach, dev->dvb.frontend,
+ &core->i2c_adap, 0x61,
+ TUNER_THOMSON_DTT761X))
+ goto frontend_detach;
}
break;
case CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_Q:
dev->ts_gen_cntrl = 0x08;
- {
- /* Do a hardware reset of chip before using it. */
- struct cx88_core *core = dev->core;
+ /* Do a hardware reset of chip before using it. */
cx_clear(MO_GP0_IO, 1);
mdelay(100);
cx_set(MO_GP0_IO, 1);
@@ -690,139 +700,137 @@
fusionhdtv_3_gold.pll_rf_set = lgdt330x_pll_rf_set;
dev->dvb.frontend = dvb_attach(lgdt330x_attach,
&fusionhdtv_3_gold,
- &dev->core->i2c_adap);
+ &core->i2c_adap);
if (dev->dvb.frontend != NULL) {
- dvb_attach(simple_tuner_attach, dev->dvb.frontend,
- &dev->core->i2c_adap, 0x61,
- TUNER_MICROTUNE_4042FI5);
- }
+ if (!dvb_attach(simple_tuner_attach, dev->dvb.frontend,
+ &core->i2c_adap, 0x61,
+ TUNER_MICROTUNE_4042FI5))
+ goto frontend_detach;
}
break;
case CX88_BOARD_DVICO_FUSIONHDTV_3_GOLD_T:
dev->ts_gen_cntrl = 0x08;
- {
- /* Do a hardware reset of chip before using it. */
- struct cx88_core *core = dev->core;
+ /* Do a hardware reset of chip before using it. */
cx_clear(MO_GP0_IO, 1);
mdelay(100);
cx_set(MO_GP0_IO, 9);
mdelay(200);
dev->dvb.frontend = dvb_attach(lgdt330x_attach,
&fusionhdtv_3_gold,
- &dev->core->i2c_adap);
+ &core->i2c_adap);
if (dev->dvb.frontend != NULL) {
- dvb_attach(simple_tuner_attach, dev->dvb.frontend,
- &dev->core->i2c_adap, 0x61,
- TUNER_THOMSON_DTT761X);
- }
+ if (!dvb_attach(simple_tuner_attach, dev->dvb.frontend,
+ &core->i2c_adap, 0x61,
+ TUNER_THOMSON_DTT761X))
+ goto frontend_detach;
}
break;
case CX88_BOARD_DVICO_FUSIONHDTV_5_GOLD:
dev->ts_gen_cntrl = 0x08;
- {
- /* Do a hardware reset of chip before using it. */
- struct cx88_core *core = dev->core;
+ /* Do a hardware reset of chip before using it. */
cx_clear(MO_GP0_IO, 1);
mdelay(100);
cx_set(MO_GP0_IO, 1);
mdelay(200);
dev->dvb.frontend = dvb_attach(lgdt330x_attach,
&fusionhdtv_5_gold,
- &dev->core->i2c_adap);
+ &core->i2c_adap);
if (dev->dvb.frontend != NULL) {
- dvb_attach(simple_tuner_attach, dev->dvb.frontend,
- &dev->core->i2c_adap, 0x61,
- TUNER_LG_TDVS_H06XF);
- dvb_attach(tda9887_attach, dev->dvb.frontend,
- &dev->core->i2c_adap, 0x43);
- }
+ if (!dvb_attach(simple_tuner_attach, dev->dvb.frontend,
+ &core->i2c_adap, 0x61,
+ TUNER_LG_TDVS_H06XF))
+ goto frontend_detach;
+ if (!dvb_attach(tda9887_attach, dev->dvb.frontend,
+ &core->i2c_adap, 0x43))
+ goto frontend_detach;
}
break;
case CX88_BOARD_PCHDTV_HD5500:
dev->ts_gen_cntrl = 0x08;
- {
- /* Do a hardware reset of chip before using it. */
- struct cx88_core *core = dev->core;
+ /* Do a hardware reset of chip before using it. */
cx_clear(MO_GP0_IO, 1);
mdelay(100);
cx_set(MO_GP0_IO, 1);
mdelay(200);
dev->dvb.frontend = dvb_attach(lgdt330x_attach,
&pchdtv_hd5500,
- &dev->core->i2c_adap);
+ &core->i2c_adap);
if (dev->dvb.frontend != NULL) {
- dvb_attach(simple_tuner_attach, dev->dvb.frontend,
- &dev->core->i2c_adap, 0x61,
- TUNER_LG_TDVS_H06XF);
- dvb_attach(tda9887_attach, dev->dvb.frontend,
- &dev->core->i2c_adap, 0x43);
- }
+ if (!dvb_attach(simple_tuner_attach, dev->dvb.frontend,
+ &core->i2c_adap, 0x61,
+ TUNER_LG_TDVS_H06XF))
+ goto frontend_detach;
+ if (!dvb_attach(tda9887_attach, dev->dvb.frontend,
+ &core->i2c_adap, 0x43))
+ goto frontend_detach;
}
break;
case CX88_BOARD_ATI_HDTVWONDER:
dev->dvb.frontend = dvb_attach(nxt200x_attach,
&ati_hdtvwonder,
- &dev->core->i2c_adap);
+ &core->i2c_adap);
if (dev->dvb.frontend != NULL) {
- dvb_attach(simple_tuner_attach, dev->dvb.frontend,
- &dev->core->i2c_adap, 0x61,
- TUNER_PHILIPS_TUV1236D);
+ if (!dvb_attach(simple_tuner_attach, dev->dvb.frontend,
+ &core->i2c_adap, 0x61,
+ TUNER_PHILIPS_TUV1236D))
+ goto frontend_detach;
}
break;
case CX88_BOARD_HAUPPAUGE_NOVASPLUS_S1:
case CX88_BOARD_HAUPPAUGE_NOVASE2_S1:
dev->dvb.frontend = dvb_attach(cx24123_attach,
&hauppauge_novas_config,
- &dev->core->i2c_adap);
+ &core->i2c_adap);
if (dev->dvb.frontend) {
- dvb_attach(isl6421_attach, dev->dvb.frontend,
- &dev->core->i2c_adap, 0x08, 0x00, 0x00);
+ if (!dvb_attach(isl6421_attach, dev->dvb.frontend,
+ &core->i2c_adap, 0x08, 0x00, 0x00))
+ goto frontend_detach;
}
break;
case CX88_BOARD_KWORLD_DVBS_100:
dev->dvb.frontend = dvb_attach(cx24123_attach,
&kworld_dvbs_100_config,
- &dev->core->i2c_adap);
+ &core->i2c_adap);
if (dev->dvb.frontend) {
- dev->core->prev_set_voltage = dev->dvb.frontend->ops.set_voltage;
+ core->prev_set_voltage = dev->dvb.frontend->ops.set_voltage;
dev->dvb.frontend->ops.set_voltage = kworld_dvbs_100_set_voltage;
}
break;
case CX88_BOARD_GENIATECH_DVBS:
dev->dvb.frontend = dvb_attach(cx24123_attach,
&geniatech_dvbs_config,
- &dev->core->i2c_adap);
+ &core->i2c_adap);
if (dev->dvb.frontend) {
- dev->core->prev_set_voltage = dev->dvb.frontend->ops.set_voltage;
+ core->prev_set_voltage = dev->dvb.frontend->ops.set_voltage;
dev->dvb.frontend->ops.set_voltage = geniatech_dvbs_set_voltage;
}
break;
case CX88_BOARD_PINNACLE_PCTV_HD_800i:
dev->dvb.frontend = dvb_attach(s5h1409_attach,
&pinnacle_pctv_hd_800i_config,
- &dev->core->i2c_adap);
+ &core->i2c_adap);
if (dev->dvb.frontend != NULL) {
/* tuner_config.video_dev must point to
* i2c_adap.algo_data
*/
- pinnacle_pctv_hd_800i_tuner_config.priv =
- dev->core->i2c_adap.algo_data;
- dvb_attach(xc5000_attach, dev->dvb.frontend,
- &dev->core->i2c_adap,
- &pinnacle_pctv_hd_800i_tuner_config);
+ if (!dvb_attach(xc5000_attach, dev->dvb.frontend,
+ &core->i2c_adap,
+ &pinnacle_pctv_hd_800i_tuner_config,
+ core->i2c_adap.algo_data))
+ goto frontend_detach;
}
break;
case CX88_BOARD_DVICO_FUSIONHDTV_5_PCI_NANO:
dev->dvb.frontend = dvb_attach(s5h1409_attach,
&dvico_hdtv5_pci_nano_config,
- &dev->core->i2c_adap);
+ &core->i2c_adap);
if (dev->dvb.frontend != NULL) {
struct dvb_frontend *fe;
struct xc2028_config cfg = {
- .i2c_adap = &dev->core->i2c_adap,
+ .i2c_adap = &core->i2c_adap,
.i2c_addr = 0x61,
.callback = cx88_pci_nano_callback,
};
@@ -841,50 +849,50 @@
case CX88_BOARD_PINNACLE_HYBRID_PCTV:
dev->dvb.frontend = dvb_attach(zl10353_attach,
&cx88_geniatech_x8000_mt,
- &dev->core->i2c_adap);
+ &core->i2c_adap);
if (attach_xc3028(0x61, dev) < 0)
- return -EINVAL;
+ goto frontend_detach;
break;
case CX88_BOARD_GENIATECH_X8000_MT:
dev->ts_gen_cntrl = 0x00;
dev->dvb.frontend = dvb_attach(zl10353_attach,
&cx88_geniatech_x8000_mt,
- &dev->core->i2c_adap);
+ &core->i2c_adap);
if (attach_xc3028(0x61, dev) < 0)
- return -EINVAL;
+ goto frontend_detach;
break;
case CX88_BOARD_KWORLD_ATSC_120:
dev->dvb.frontend = dvb_attach(s5h1409_attach,
&kworld_atsc_120_config,
- &dev->core->i2c_adap);
+ &core->i2c_adap);
if (attach_xc3028(0x61, dev) < 0)
- return -EINVAL;
+ goto frontend_detach;
break;
case CX88_BOARD_DVICO_FUSIONHDTV_7_GOLD:
dev->dvb.frontend = dvb_attach(s5h1411_attach,
&dvico_fusionhdtv7_config,
- &dev->core->i2c_adap);
+ &core->i2c_adap);
if (dev->dvb.frontend != NULL) {
/* tuner_config.video_dev must point to
* i2c_adap.algo_data
*/
- dvico_fusionhdtv7_tuner_config.priv =
- dev->core->i2c_adap.algo_data;
- dvb_attach(xc5000_attach, dev->dvb.frontend,
- &dev->core->i2c_adap,
- &dvico_fusionhdtv7_tuner_config);
+ if (!dvb_attach(xc5000_attach, dev->dvb.frontend,
+ &core->i2c_adap,
+ &dvico_fusionhdtv7_tuner_config,
+ core->i2c_adap.algo_data))
+ goto frontend_detach;
}
break;
default:
printk(KERN_ERR "%s/2: The frontend of your DVB/ATSC card isn't supported yet\n",
- dev->core->name);
+ core->name);
break;
}
if (NULL == dev->dvb.frontend) {
printk(KERN_ERR
"%s/2: frontend initialization failed\n",
- dev->core->name);
+ core->name);
return -EINVAL;
}
@@ -892,11 +900,18 @@
dev->dvb.frontend->ops.ts_bus_ctrl = cx88_dvb_bus_ctrl;
/* Put the analog decoder in standby to keep it quiet */
- cx88_call_i2c_clients (dev->core, TUNER_SET_STANDBY, NULL);
+ cx88_call_i2c_clients(core, TUNER_SET_STANDBY, NULL);
/* register everything */
return videobuf_dvb_register(&dev->dvb, THIS_MODULE, dev,
&dev->pci->dev, adapter_nr);
+
+frontend_detach:
+ if (dev->dvb.frontend) {
+ dvb_frontend_detach(dev->dvb.frontend);
+ dev->dvb.frontend = NULL;
+ }
+ return -EINVAL;
}
/* ----------------------------------------------------------- */
diff --git a/drivers/media/video/em28xx/Kconfig b/drivers/media/video/em28xx/Kconfig
index c7c2896..16a5af3 100644
--- a/drivers/media/video/em28xx/Kconfig
+++ b/drivers/media/video/em28xx/Kconfig
@@ -1,7 +1,7 @@
config VIDEO_EM28XX
tristate "Empia EM28xx USB video capture support"
depends on VIDEO_DEV && I2C && INPUT
- select MEDIA_TUNER
+ select VIDEO_TUNER
select VIDEO_TVEEPROM
select VIDEO_IR
select VIDEOBUF_VMALLOC
@@ -35,7 +35,6 @@
select DVB_LGDT330X if !DVB_FE_CUSTOMISE
select DVB_ZL10353 if !DVB_FE_CUSTOMISE
select VIDEOBUF_DVB
- select FW_LOADER
---help---
This adds support for DVB cards based on the
Empiatech em28xx chips.
diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c
index 50ccf37..3e4f3c7 100644
--- a/drivers/media/video/em28xx/em28xx-cards.c
+++ b/drivers/media/video/em28xx/em28xx-cards.c
@@ -420,7 +420,13 @@
.driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900 },
{ USB_DEVICE(0x2040, 0x6502),
.driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900 },
- { USB_DEVICE(0x2040, 0x6513),
+ { USB_DEVICE(0x2040, 0x6513), /* HCW HVR-980 */
+ .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_950 },
+ { USB_DEVICE(0x2040, 0x6517), /* HP HVR-950 */
+ .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_950 },
+ { USB_DEVICE(0x2040, 0x651b), /* RP HVR-950 */
+ .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_950 },
+ { USB_DEVICE(0x2040, 0x651f), /* HCW HVR-850 */
.driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_950 },
{ USB_DEVICE(0x0ccd, 0x0042),
.driver_info = EM2880_BOARD_TERRATEC_HYBRID_XS },
diff --git a/drivers/media/video/em28xx/em28xx-dvb.c b/drivers/media/video/em28xx/em28xx-dvb.c
index 7df81575..8cf4983 100644
--- a/drivers/media/video/em28xx/em28xx-dvb.c
+++ b/drivers/media/video/em28xx/em28xx-dvb.c
@@ -251,7 +251,6 @@
printk(KERN_ERR "%s/2: xc3028 attach failed\n",
dev->name);
dvb_frontend_detach(dev->dvb->frontend);
- dvb_unregister_frontend(dev->dvb->frontend);
dev->dvb->frontend = NULL;
return -EINVAL;
}
diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c
index 8996175..fb163ec 100644
--- a/drivers/media/video/em28xx/em28xx-video.c
+++ b/drivers/media/video/em28xx/em28xx-video.c
@@ -1166,13 +1166,13 @@
reg->val = ret;
} else {
- u64 val = 0;
+ __le64 val = 0;
ret = em28xx_read_reg_req_len(dev, USB_REQ_GET_STATUS,
reg->reg, (char *)&val, 2);
if (ret < 0)
return ret;
- reg->val = cpu_to_le64((__u64)val);
+ reg->val = le64_to_cpu(val);
}
return 0;
@@ -1183,9 +1183,9 @@
{
struct em28xx_fh *fh = priv;
struct em28xx *dev = fh->dev;
- u64 buf;
+ __le64 buf;
- buf = le64_to_cpu((__u64)reg->val);
+ buf = cpu_to_le64(reg->val);
return em28xx_write_regs(dev, reg->reg, (char *)&buf,
em28xx_reg_len(reg->reg));
diff --git a/drivers/media/video/et61x251/et61x251_core.c b/drivers/media/video/et61x251/et61x251_core.c
index 5e749c5..15d037a 100644
--- a/drivers/media/video/et61x251/et61x251_core.c
+++ b/drivers/media/video/et61x251/et61x251_core.c
@@ -34,7 +34,7 @@
#include <linux/mm.h>
#include <linux/vmalloc.h>
#include <linux/page-flags.h>
-#include <linux/byteorder/generic.h>
+#include <asm/byteorder.h>
#include <asm/page.h>
#include <asm/uaccess.h>
diff --git a/drivers/media/video/ivtv/Kconfig b/drivers/media/video/ivtv/Kconfig
index eec115b..5d7ee8f 100644
--- a/drivers/media/video/ivtv/Kconfig
+++ b/drivers/media/video/ivtv/Kconfig
@@ -1,10 +1,12 @@
config VIDEO_IVTV
tristate "Conexant cx23416/cx23415 MPEG encoder/decoder support"
depends on VIDEO_V4L1 && VIDEO_V4L2 && PCI && I2C && EXPERIMENTAL
+ depends on INPUT # due to VIDEO_IR
+ depends on HOTPLUG # due to FW_LOADER
select I2C_ALGOBIT
select FW_LOADER
select VIDEO_IR
- select MEDIA_TUNER
+ select VIDEO_TUNER
select VIDEO_TVEEPROM
select VIDEO_CX2341X
select VIDEO_CX25840
diff --git a/drivers/media/video/ivtv/ivtv-controls.c b/drivers/media/video/ivtv/ivtv-controls.c
index 8c02fa6..c7e449f 100644
--- a/drivers/media/video/ivtv/ivtv-controls.c
+++ b/drivers/media/video/ivtv/ivtv-controls.c
@@ -181,12 +181,12 @@
return 0;
}
/* Need sliced data for mpeg insertion */
- if (get_service_set(itv->vbi.sliced_in) == 0) {
+ if (ivtv_get_service_set(itv->vbi.sliced_in) == 0) {
if (itv->is_60hz)
itv->vbi.sliced_in->service_set = V4L2_SLICED_CAPTION_525;
else
itv->vbi.sliced_in->service_set = V4L2_SLICED_WSS_625;
- expand_service_set(itv->vbi.sliced_in, itv->is_50hz);
+ ivtv_expand_service_set(itv->vbi.sliced_in, itv->is_50hz);
}
return 0;
}
diff --git a/drivers/media/video/ivtv/ivtv-driver.c b/drivers/media/video/ivtv/ivtv-driver.c
index ed020f7..797e636 100644
--- a/drivers/media/video/ivtv/ivtv-driver.c
+++ b/drivers/media/video/ivtv/ivtv-driver.c
@@ -853,6 +853,7 @@
return 0;
}
+#ifdef MODULE
static u32 ivtv_request_module(struct ivtv *itv, u32 hw,
const char *name, u32 id)
{
@@ -865,12 +866,14 @@
IVTV_DEBUG_INFO("Loaded module %s\n", name);
return hw;
}
+#endif
static void ivtv_load_and_init_modules(struct ivtv *itv)
{
u32 hw = itv->card->hw_all;
unsigned i;
+#ifdef MODULE
/* load modules */
#ifndef CONFIG_MEDIA_TUNER
hw = ivtv_request_module(itv, hw, "tuner", IVTV_HW_TUNER);
@@ -911,6 +914,7 @@
#ifndef CONFIG_VIDEO_M52790
hw = ivtv_request_module(itv, hw, "m52790", IVTV_HW_M52790);
#endif
+#endif
/* check which i2c devices are actually found */
for (i = 0; i < 32; i++) {
@@ -1228,7 +1232,7 @@
return 0;
free_streams:
- ivtv_streams_cleanup(itv);
+ ivtv_streams_cleanup(itv, 1);
free_irq:
free_irq(itv->dev->irq, (void *)itv);
free_i2c:
@@ -1373,7 +1377,7 @@
flush_workqueue(itv->irq_work_queues);
destroy_workqueue(itv->irq_work_queues);
- ivtv_streams_cleanup(itv);
+ ivtv_streams_cleanup(itv, 1);
ivtv_udma_free(itv);
exit_ivtv_i2c(itv);
diff --git a/drivers/media/video/ivtv/ivtv-driver.h b/drivers/media/video/ivtv/ivtv-driver.h
index ba06e81..9d23b1e 100644
--- a/drivers/media/video/ivtv/ivtv-driver.h
+++ b/drivers/media/video/ivtv/ivtv-driver.h
@@ -259,6 +259,12 @@
/* Scatter-Gather array element, used in DMA transfers */
struct ivtv_sg_element {
+ __le32 src;
+ __le32 dst;
+ __le32 size;
+};
+
+struct ivtv_sg_host_element {
u32 src;
u32 dst;
u32 size;
@@ -349,8 +355,8 @@
u16 dma_xfer_cnt;
/* Base Dev SG Array for cx23415/6 */
- struct ivtv_sg_element *sg_pending;
- struct ivtv_sg_element *sg_processing;
+ struct ivtv_sg_host_element *sg_pending;
+ struct ivtv_sg_host_element *sg_processing;
struct ivtv_sg_element *sg_dma;
dma_addr_t sg_handle;
int sg_pending_size;
diff --git a/drivers/media/video/ivtv/ivtv-fileops.c b/drivers/media/video/ivtv/ivtv-fileops.c
index 2b74b0a..db813e0 100644
--- a/drivers/media/video/ivtv/ivtv-fileops.c
+++ b/drivers/media/video/ivtv/ivtv-fileops.c
@@ -587,7 +587,7 @@
since we may get here before the stream has been fully set-up */
if (mode == OUT_YUV && s->q_full.length == 0 && itv->dma_data_req_size) {
while (count >= itv->dma_data_req_size) {
- if (!ivtv_yuv_udma_stream_frame (itv, (void *)user_buf)) {
+ if (!ivtv_yuv_udma_stream_frame (itv, (void __user *)user_buf)) {
bytes_written += itv->dma_data_req_size;
user_buf += itv->dma_data_req_size;
count -= itv->dma_data_req_size;
@@ -987,6 +987,8 @@
/* Find which card this open was on */
spin_lock(&ivtv_cards_lock);
for (x = 0; itv == NULL && x < ivtv_cards_active; x++) {
+ if (ivtv_cards[x] == NULL)
+ continue;
/* find out which stream this open was on */
for (y = 0; y < IVTV_MAX_STREAMS; y++) {
s = &ivtv_cards[x]->streams[y];
diff --git a/drivers/media/video/ivtv/ivtv-i2c.c b/drivers/media/video/ivtv/ivtv-i2c.c
index 771adf4..32129f3 100644
--- a/drivers/media/video/ivtv/ivtv-i2c.c
+++ b/drivers/media/video/ivtv/ivtv-i2c.c
@@ -136,7 +136,7 @@
};
/* This array should match the IVTV_HW_ defines */
-static const char * const hw_drivernames[] = {
+static const char * const hw_devicenames[] = {
"cx25840",
"saa7115",
"saa7127",
@@ -145,7 +145,7 @@
"wm8775",
"cs53l32a",
"tveeprom",
- "saa7115",
+ "saa7114",
"upd64031a",
"upd64083",
"saa717x",
@@ -167,8 +167,7 @@
return -1;
id = hw_driverids[idx];
memset(&info, 0, sizeof(info));
- strlcpy(info.driver_name, hw_drivernames[idx],
- sizeof(info.driver_name));
+ strlcpy(info.type, hw_devicenames[idx], sizeof(info.type));
info.addr = hw_addrs[idx];
for (i = 0; itv->i2c_clients[i] && i < I2C_CLIENTS_MAX; i++) {}
@@ -657,7 +656,7 @@
for (i = 0; i < ARRAY_SIZE(hw_driverids); i++)
if (hw_driverids[i] == id)
- return hw_drivernames[i];
+ return hw_devicenames[i];
return "unknown device";
}
@@ -668,7 +667,7 @@
for (i = 0; i < ARRAY_SIZE(hw_driverids); i++)
if (1 << i == hw)
- return hw_drivernames[i];
+ return hw_devicenames[i];
return "unknown device";
}
@@ -770,7 +769,7 @@
* same size and GPIO must be the last entry.
*/
if (ARRAY_SIZE(hw_driverids) != ARRAY_SIZE(hw_addrs) ||
- ARRAY_SIZE(hw_drivernames) != ARRAY_SIZE(hw_addrs) ||
+ ARRAY_SIZE(hw_devicenames) != ARRAY_SIZE(hw_addrs) ||
IVTV_HW_GPIO != (1 << (ARRAY_SIZE(hw_addrs) - 1)) ||
hw_driverids[ARRAY_SIZE(hw_addrs) - 1]) {
IVTV_ERR("Mismatched I2C hardware arrays\n");
diff --git a/drivers/media/video/ivtv/ivtv-ioctl.c b/drivers/media/video/ivtv/ivtv-ioctl.c
index d508b5d..26cc0f6 100644
--- a/drivers/media/video/ivtv/ivtv-ioctl.c
+++ b/drivers/media/video/ivtv/ivtv-ioctl.c
@@ -38,7 +38,7 @@
#include <linux/dvb/audio.h>
#include <linux/i2c-id.h>
-u16 service2vbi(int type)
+u16 ivtv_service2vbi(int type)
{
switch (type) {
case V4L2_SLICED_TELETEXT_B:
@@ -88,7 +88,7 @@
return 0;
}
-void expand_service_set(struct v4l2_sliced_vbi_format *fmt, int is_pal)
+void ivtv_expand_service_set(struct v4l2_sliced_vbi_format *fmt, int is_pal)
{
u16 set = fmt->service_set;
int f, l;
@@ -115,7 +115,7 @@
return set != 0;
}
-u16 get_service_set(struct v4l2_sliced_vbi_format *fmt)
+u16 ivtv_get_service_set(struct v4l2_sliced_vbi_format *fmt)
{
int f, l;
u16 set = 0;
@@ -466,7 +466,7 @@
vbifmt->service_lines[0][23] = V4L2_SLICED_WSS_625;
vbifmt->service_lines[0][16] = V4L2_SLICED_VPS;
}
- vbifmt->service_set = get_service_set(vbifmt);
+ vbifmt->service_set = ivtv_get_service_set(vbifmt);
break;
}
@@ -481,12 +481,12 @@
if (streamtype == IVTV_DEC_STREAM_TYPE_VBI) {
vbifmt->service_set = itv->is_50hz ? V4L2_SLICED_VBI_625 :
V4L2_SLICED_VBI_525;
- expand_service_set(vbifmt, itv->is_50hz);
+ ivtv_expand_service_set(vbifmt, itv->is_50hz);
break;
}
itv->video_dec_func(itv, VIDIOC_G_FMT, fmt);
- vbifmt->service_set = get_service_set(vbifmt);
+ vbifmt->service_set = ivtv_get_service_set(vbifmt);
break;
}
case V4L2_BUF_TYPE_VBI_OUTPUT:
@@ -640,9 +640,9 @@
memset(vbifmt->reserved, 0, sizeof(vbifmt->reserved));
if (vbifmt->service_set)
- expand_service_set(vbifmt, itv->is_50hz);
+ ivtv_expand_service_set(vbifmt, itv->is_50hz);
set = check_service_set(vbifmt, itv->is_50hz);
- vbifmt->service_set = get_service_set(vbifmt);
+ vbifmt->service_set = ivtv_get_service_set(vbifmt);
if (!set_fmt)
return 0;
diff --git a/drivers/media/video/ivtv/ivtv-ioctl.h b/drivers/media/video/ivtv/ivtv-ioctl.h
index a03351b..4e67f0e 100644
--- a/drivers/media/video/ivtv/ivtv-ioctl.h
+++ b/drivers/media/video/ivtv/ivtv-ioctl.h
@@ -21,9 +21,9 @@
#ifndef IVTV_IOCTL_H
#define IVTV_IOCTL_H
-u16 service2vbi(int type);
-void expand_service_set(struct v4l2_sliced_vbi_format *fmt, int is_pal);
-u16 get_service_set(struct v4l2_sliced_vbi_format *fmt);
+u16 ivtv_service2vbi(int type);
+void ivtv_expand_service_set(struct v4l2_sliced_vbi_format *fmt, int is_pal);
+u16 ivtv_get_service_set(struct v4l2_sliced_vbi_format *fmt);
int ivtv_v4l2_ioctl(struct inode *inode, struct file *filp, unsigned int cmd,
unsigned long arg);
int ivtv_v4l2_ioctls(struct ivtv *itv, struct file *filp, unsigned int cmd, void *arg);
diff --git a/drivers/media/video/ivtv/ivtv-irq.c b/drivers/media/video/ivtv/ivtv-irq.c
index d8ba3a4..fba150a 100644
--- a/drivers/media/video/ivtv/ivtv-irq.c
+++ b/drivers/media/video/ivtv/ivtv-irq.c
@@ -231,14 +231,14 @@
struct ivtv_buffer *buf = NULL;
struct list_head *p;
u32 offset;
- u32 *u32buf;
+ __le32 *u32buf;
int x = 0;
IVTV_DEBUG_HI_DMA("%s %s completed (%x)\n", ivtv_use_pio(s) ? "PIO" : "DMA",
s->name, s->dma_offset);
list_for_each(p, &s->q_dma.list) {
buf = list_entry(p, struct ivtv_buffer, list);
- u32buf = (u32 *)buf->buf;
+ u32buf = (__le32 *)buf->buf;
/* Sync Buffer */
ivtv_buf_sync_for_cpu(s, buf);
@@ -444,7 +444,7 @@
}
s->dma_xfer_cnt++;
- memcpy(s->sg_processing, s->sg_pending, sizeof(struct ivtv_sg_element) * s->sg_pending_size);
+ memcpy(s->sg_processing, s->sg_pending, sizeof(struct ivtv_sg_host_element) * s->sg_pending_size);
s->sg_processing_size = s->sg_pending_size;
s->sg_pending_size = 0;
s->sg_processed = 0;
@@ -473,7 +473,7 @@
if (s->q_predma.bytesused)
ivtv_queue_move(s, &s->q_predma, NULL, &s->q_dma, s->q_predma.bytesused);
s->dma_xfer_cnt++;
- memcpy(s->sg_processing, s->sg_pending, sizeof(struct ivtv_sg_element) * s->sg_pending_size);
+ memcpy(s->sg_processing, s->sg_pending, sizeof(struct ivtv_sg_host_element) * s->sg_pending_size);
s->sg_processing_size = s->sg_pending_size;
s->sg_pending_size = 0;
s->sg_processed = 0;
diff --git a/drivers/media/video/ivtv/ivtv-queue.c b/drivers/media/video/ivtv/ivtv-queue.c
index 3e1deec..71bd13e 100644
--- a/drivers/media/video/ivtv/ivtv-queue.c
+++ b/drivers/media/video/ivtv/ivtv-queue.c
@@ -193,7 +193,7 @@
int ivtv_stream_alloc(struct ivtv_stream *s)
{
struct ivtv *itv = s->itv;
- int SGsize = sizeof(struct ivtv_sg_element) * s->buffers;
+ int SGsize = sizeof(struct ivtv_sg_host_element) * s->buffers;
int i;
if (s->buffers == 0)
@@ -203,14 +203,14 @@
s->dma != PCI_DMA_NONE ? "DMA " : "",
s->name, s->buffers, s->buf_size, s->buffers * s->buf_size / 1024);
- s->sg_pending = kzalloc(SGsize, GFP_KERNEL);
+ s->sg_pending = kzalloc(SGsize, GFP_KERNEL|__GFP_NOWARN);
if (s->sg_pending == NULL) {
IVTV_ERR("Could not allocate sg_pending for %s stream\n", s->name);
return -ENOMEM;
}
s->sg_pending_size = 0;
- s->sg_processing = kzalloc(SGsize, GFP_KERNEL);
+ s->sg_processing = kzalloc(SGsize, GFP_KERNEL|__GFP_NOWARN);
if (s->sg_processing == NULL) {
IVTV_ERR("Could not allocate sg_processing for %s stream\n", s->name);
kfree(s->sg_pending);
@@ -219,7 +219,8 @@
}
s->sg_processing_size = 0;
- s->sg_dma = kzalloc(sizeof(struct ivtv_sg_element), GFP_KERNEL);
+ s->sg_dma = kzalloc(sizeof(struct ivtv_sg_element),
+ GFP_KERNEL|__GFP_NOWARN);
if (s->sg_dma == NULL) {
IVTV_ERR("Could not allocate sg_dma for %s stream\n", s->name);
kfree(s->sg_pending);
@@ -235,11 +236,12 @@
/* allocate stream buffers. Initially all buffers are in q_free. */
for (i = 0; i < s->buffers; i++) {
- struct ivtv_buffer *buf = kzalloc(sizeof(struct ivtv_buffer), GFP_KERNEL);
+ struct ivtv_buffer *buf = kzalloc(sizeof(struct ivtv_buffer),
+ GFP_KERNEL|__GFP_NOWARN);
if (buf == NULL)
break;
- buf->buf = kmalloc(s->buf_size + 256, GFP_KERNEL);
+ buf->buf = kmalloc(s->buf_size + 256, GFP_KERNEL|__GFP_NOWARN);
if (buf->buf == NULL) {
kfree(buf);
break;
diff --git a/drivers/media/video/ivtv/ivtv-streams.c b/drivers/media/video/ivtv/ivtv-streams.c
index 4ab8d36..c854285 100644
--- a/drivers/media/video/ivtv/ivtv-streams.c
+++ b/drivers/media/video/ivtv/ivtv-streams.c
@@ -44,23 +44,25 @@
#include "ivtv-streams.h"
static const struct file_operations ivtv_v4l2_enc_fops = {
- .owner = THIS_MODULE,
- .read = ivtv_v4l2_read,
- .write = ivtv_v4l2_write,
- .open = ivtv_v4l2_open,
- .ioctl = ivtv_v4l2_ioctl,
- .release = ivtv_v4l2_close,
- .poll = ivtv_v4l2_enc_poll,
+ .owner = THIS_MODULE,
+ .read = ivtv_v4l2_read,
+ .write = ivtv_v4l2_write,
+ .open = ivtv_v4l2_open,
+ .ioctl = ivtv_v4l2_ioctl,
+ .compat_ioctl = v4l_compat_ioctl32,
+ .release = ivtv_v4l2_close,
+ .poll = ivtv_v4l2_enc_poll,
};
static const struct file_operations ivtv_v4l2_dec_fops = {
- .owner = THIS_MODULE,
- .read = ivtv_v4l2_read,
- .write = ivtv_v4l2_write,
- .open = ivtv_v4l2_open,
- .ioctl = ivtv_v4l2_ioctl,
- .release = ivtv_v4l2_close,
- .poll = ivtv_v4l2_dec_poll,
+ .owner = THIS_MODULE,
+ .read = ivtv_v4l2_read,
+ .write = ivtv_v4l2_write,
+ .open = ivtv_v4l2_open,
+ .ioctl = ivtv_v4l2_ioctl,
+ .compat_ioctl = v4l_compat_ioctl32,
+ .release = ivtv_v4l2_close,
+ .poll = ivtv_v4l2_dec_poll,
};
#define IVTV_V4L2_DEC_MPG_OFFSET 16 /* offset from 0 to register decoder mpg v4l2 minors on */
@@ -244,7 +246,7 @@
return 0;
/* One or more streams could not be initialized. Clean 'em all up. */
- ivtv_streams_cleanup(itv);
+ ivtv_streams_cleanup(itv, 0);
return -ENOMEM;
}
@@ -304,12 +306,12 @@
return 0;
/* One or more streams could not be initialized. Clean 'em all up. */
- ivtv_streams_cleanup(itv);
+ ivtv_streams_cleanup(itv, 1);
return -ENOMEM;
}
/* Unregister v4l2 devices */
-void ivtv_streams_cleanup(struct ivtv *itv)
+void ivtv_streams_cleanup(struct ivtv *itv, int unregister)
{
int type;
@@ -322,8 +324,11 @@
continue;
ivtv_stream_free(&itv->streams[type]);
- /* Unregister device */
- video_unregister_device(vdev);
+ /* Unregister or release device */
+ if (unregister)
+ video_unregister_device(vdev);
+ else
+ video_device_release(vdev);
}
}
diff --git a/drivers/media/video/ivtv/ivtv-streams.h b/drivers/media/video/ivtv/ivtv-streams.h
index 3d76a41..a653a513 100644
--- a/drivers/media/video/ivtv/ivtv-streams.h
+++ b/drivers/media/video/ivtv/ivtv-streams.h
@@ -23,7 +23,7 @@
int ivtv_streams_setup(struct ivtv *itv);
int ivtv_streams_register(struct ivtv *itv);
-void ivtv_streams_cleanup(struct ivtv *itv);
+void ivtv_streams_cleanup(struct ivtv *itv, int unregister);
/* Capture related */
int ivtv_start_v4l2_encode_stream(struct ivtv_stream *s);
diff --git a/drivers/media/video/ivtv/ivtv-vbi.c b/drivers/media/video/ivtv/ivtv-vbi.c
index c151bcf..71798f0 100644
--- a/drivers/media/video/ivtv/ivtv-vbi.c
+++ b/drivers/media/video/ivtv/ivtv-vbi.c
@@ -169,7 +169,8 @@
linemask[0] |= (1 << l);
else
linemask[1] |= (1 << (l - 32));
- dst[sd + 12 + line * 43] = service2vbi(itv->vbi.sliced_data[i].id);
+ dst[sd + 12 + line * 43] =
+ ivtv_service2vbi(itv->vbi.sliced_data[i].id);
memcpy(dst + sd + 12 + line * 43 + 1, itv->vbi.sliced_data[i].data, 42);
line++;
}
diff --git a/drivers/media/video/ivtv/ivtv-version.h b/drivers/media/video/ivtv/ivtv-version.h
index 02c5ab0..442f43f 100644
--- a/drivers/media/video/ivtv/ivtv-version.h
+++ b/drivers/media/video/ivtv/ivtv-version.h
@@ -22,8 +22,8 @@
#define IVTV_DRIVER_NAME "ivtv"
#define IVTV_DRIVER_VERSION_MAJOR 1
-#define IVTV_DRIVER_VERSION_MINOR 2
-#define IVTV_DRIVER_VERSION_PATCHLEVEL 1
+#define IVTV_DRIVER_VERSION_MINOR 3
+#define IVTV_DRIVER_VERSION_PATCHLEVEL 0
#define IVTV_VERSION __stringify(IVTV_DRIVER_VERSION_MAJOR) "." __stringify(IVTV_DRIVER_VERSION_MINOR) "." __stringify(IVTV_DRIVER_VERSION_PATCHLEVEL)
#define IVTV_DRIVER_VERSION KERNEL_VERSION(IVTV_DRIVER_VERSION_MAJOR,IVTV_DRIVER_VERSION_MINOR,IVTV_DRIVER_VERSION_PATCHLEVEL)
diff --git a/drivers/media/video/ivtv/ivtv-yuv.c b/drivers/media/video/ivtv/ivtv-yuv.c
index 62f70bd..3092ff1 100644
--- a/drivers/media/video/ivtv/ivtv-yuv.c
+++ b/drivers/media/video/ivtv/ivtv-yuv.c
@@ -908,7 +908,7 @@
}
/* We need a buffer for blanking when Y plane is offset - non-fatal if we can't get one */
- yi->blanking_ptr = kzalloc(720 * 16, GFP_KERNEL);
+ yi->blanking_ptr = kzalloc(720 * 16, GFP_KERNEL|__GFP_NOWARN);
if (yi->blanking_ptr) {
yi->blanking_dmaptr = pci_map_single(itv->dev, yi->blanking_ptr, 720*16, PCI_DMA_TODEVICE);
} else {
@@ -1116,7 +1116,7 @@
}
/* Attempt to dma a frame from a user buffer */
-int ivtv_yuv_udma_stream_frame(struct ivtv *itv, void *src)
+int ivtv_yuv_udma_stream_frame(struct ivtv *itv, void __user *src)
{
struct yuv_playback_info *yi = &itv->yuv_info;
struct ivtv_dma_frame dma_args;
diff --git a/drivers/media/video/ivtv/ivtv-yuv.h b/drivers/media/video/ivtv/ivtv-yuv.h
index 2fe5f12..ca5173f 100644
--- a/drivers/media/video/ivtv/ivtv-yuv.h
+++ b/drivers/media/video/ivtv/ivtv-yuv.h
@@ -35,7 +35,7 @@
int ivtv_yuv_filter_check(struct ivtv *itv);
void ivtv_yuv_setup_stream_frame(struct ivtv *itv);
-int ivtv_yuv_udma_stream_frame(struct ivtv *itv, void *src);
+int ivtv_yuv_udma_stream_frame(struct ivtv *itv, void __user *src);
void ivtv_yuv_frame_complete(struct ivtv *itv);
int ivtv_yuv_prep_frame(struct ivtv *itv, struct ivtv_dma_frame *args);
void ivtv_yuv_close(struct ivtv *itv);
diff --git a/drivers/media/video/ivtv/ivtvfb.c b/drivers/media/video/ivtv/ivtvfb.c
index df789f6..73be154 100644
--- a/drivers/media/video/ivtv/ivtvfb.c
+++ b/drivers/media/video/ivtv/ivtvfb.c
@@ -948,7 +948,8 @@
}
/* Allocate the pseudo palette */
- oi->ivtvfb_info.pseudo_palette = kmalloc(sizeof(u32) * 16, GFP_KERNEL);
+ oi->ivtvfb_info.pseudo_palette =
+ kmalloc(sizeof(u32) * 16, GFP_KERNEL|__GFP_NOWARN);
if (!oi->ivtvfb_info.pseudo_palette) {
IVTVFB_ERR("abort, unable to alloc pseudo pallete\n");
@@ -1056,7 +1057,8 @@
return -EBUSY;
}
- itv->osd_info = kzalloc(sizeof(struct osd_info), GFP_ATOMIC);
+ itv->osd_info = kzalloc(sizeof(struct osd_info),
+ GFP_ATOMIC|__GFP_NOWARN);
if (itv->osd_info == NULL) {
IVTVFB_ERR("Failed to allocate memory for osd_info\n");
return -ENOMEM;
diff --git a/drivers/media/video/m52790.c b/drivers/media/video/m52790.c
index 5b9dfa2..8e0160d 100644
--- a/drivers/media/video/m52790.c
+++ b/drivers/media/video/m52790.c
@@ -135,8 +135,6 @@
if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -EIO;
- snprintf(client->name, sizeof(client->name) - 1, "m52790");
-
v4l_info(client, "chip found @ 0x%x (%s)\n",
client->addr << 1, client->adapter->name);
@@ -159,11 +157,18 @@
/* ----------------------------------------------------------------------- */
+static const struct i2c_device_id m52790_id[] = {
+ { "m52790", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, m52790_id);
+
static struct v4l2_i2c_driver_data v4l2_i2c_data = {
.name = "m52790",
.driverid = I2C_DRIVERID_M52790,
.command = m52790_command,
.probe = m52790_probe,
.remove = m52790_remove,
+ .id_table = m52790_id,
};
diff --git a/drivers/media/video/msp3400-driver.c b/drivers/media/video/msp3400-driver.c
index e627316..310dbab 100644
--- a/drivers/media/video/msp3400-driver.c
+++ b/drivers/media/video/msp3400-driver.c
@@ -815,7 +815,8 @@
int msp_product, msp_prod_hi, msp_prod_lo;
int msp_rom;
- snprintf(client->name, sizeof(client->name) - 1, "msp3400");
+ if (!id)
+ strlcpy(client->name, "msp3400", sizeof(client->name));
if (msp_reset(client) == -1) {
v4l_dbg(1, msp_debug, client, "msp3400 not found\n");
@@ -864,9 +865,6 @@
msp_revision = (state->rev1 & 0x0f) + '@';
msp_hard = ((state->rev1 >> 8) & 0xff) + '@';
msp_rom = state->rev2 & 0x1f;
- snprintf(client->name, sizeof(client->name), "MSP%d4%02d%c-%c%d",
- msp_family, msp_product,
- msp_revision, msp_hard, msp_rom);
/* Rev B=2, C=3, D=4, G=7 */
state->ident = msp_family * 10000 + 4000 + msp_product * 10 +
msp_revision - '@';
@@ -931,7 +929,9 @@
}
/* hello world :-) */
- v4l_info(client, "%s found @ 0x%x (%s)\n", client->name,
+ v4l_info(client, "MSP%d4%02d%c-%c%d found @ 0x%x (%s)\n",
+ msp_family, msp_product,
+ msp_revision, msp_hard, msp_rom,
client->addr << 1, client->adapter->name);
v4l_info(client, "%s ", client->name);
if (state->has_nicam && state->has_radio)
@@ -987,6 +987,12 @@
/* ----------------------------------------------------------------------- */
+static const struct i2c_device_id msp_id[] = {
+ { "msp3400", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, msp_id);
+
static struct v4l2_i2c_driver_data v4l2_i2c_data = {
.name = "msp3400",
.driverid = I2C_DRIVERID_MSP3400,
@@ -995,6 +1001,7 @@
.remove = msp_remove,
.suspend = msp_suspend,
.resume = msp_resume,
+ .id_table = msp_id,
};
diff --git a/drivers/media/video/mt9m001.c b/drivers/media/video/mt9m001.c
index 179e470..ee43499 100644
--- a/drivers/media/video/mt9m001.c
+++ b/drivers/media/video/mt9m001.c
@@ -12,15 +12,12 @@
#include <linux/slab.h>
#include <linux/i2c.h>
#include <linux/log2.h>
+#include <linux/gpio.h>
#include <media/v4l2-common.h>
#include <media/v4l2-chip-ident.h>
#include <media/soc_camera.h>
-#ifdef CONFIG_MT9M001_PCA9536_SWITCH
-#include <asm/gpio.h>
-#endif
-
/* mt9m001 i2c address 0x5d
* The platform has to define i2c_board_info
* and call i2c_register_board_info() */
diff --git a/drivers/media/video/mt9v022.c b/drivers/media/video/mt9v022.c
index d1391ac..1658fe5 100644
--- a/drivers/media/video/mt9v022.c
+++ b/drivers/media/video/mt9v022.c
@@ -13,15 +13,12 @@
#include <linux/i2c.h>
#include <linux/delay.h>
#include <linux/log2.h>
+#include <linux/gpio.h>
#include <media/v4l2-common.h>
#include <media/v4l2-chip-ident.h>
#include <media/soc_camera.h>
-#ifdef CONFIG_MT9M001_PCA9536_SWITCH
-#include <asm/gpio.h>
-#endif
-
/* mt9v022 i2c address 0x48, 0x4c, 0x58, 0x5c
* The platform has to define i2c_board_info
* and call i2c_register_board_info() */
@@ -91,7 +88,7 @@
struct mt9v022 {
struct i2c_client *client;
struct soc_camera_device icd;
- int model; /* V4L2_IDENT_MT9M001* codes from v4l2-chip-ident.h */
+ int model; /* V4L2_IDENT_MT9V022* codes from v4l2-chip-ident.h */
int switch_gpio;
u16 chip_control;
unsigned char datawidth;
diff --git a/drivers/media/video/pvrusb2/Kconfig b/drivers/media/video/pvrusb2/Kconfig
index 9620c67..4482b2c 100644
--- a/drivers/media/video/pvrusb2/Kconfig
+++ b/drivers/media/video/pvrusb2/Kconfig
@@ -1,8 +1,10 @@
config VIDEO_PVRUSB2
tristate "Hauppauge WinTV-PVR USB2 support"
depends on VIDEO_V4L2 && I2C
+ depends on VIDEO_MEDIA # Avoids pvrusb = Y / DVB = M
+ depends on HOTPLUG # due to FW_LOADER
select FW_LOADER
- select MEDIA_TUNER
+ select VIDEO_TUNER
select VIDEO_TVEEPROM
select VIDEO_CX2341X
select VIDEO_SAA711X
diff --git a/drivers/media/video/saa7115.c b/drivers/media/video/saa7115.c
index e684108..435c083 100644
--- a/drivers/media/video/saa7115.c
+++ b/drivers/media/video/saa7115.c
@@ -1456,14 +1456,13 @@
struct saa711x_state *state;
int i;
char name[17];
- u8 chip_id;
+ char chip_id;
+ int autodetect = !id || id->driver_data == 1;
/* Check if the adapter supports the needed features */
if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -EIO;
- snprintf(client->name, sizeof(client->name) - 1, "saa7115");
-
for (i = 0; i < 0x0f; i++) {
saa711x_write(client, 0, i);
name[i] = (saa711x_read(client, 0) & 0x0f) + '0';
@@ -1472,8 +1471,7 @@
}
name[i] = '\0';
- saa711x_write(client, 0, 5);
- chip_id = saa711x_read(client, 0) & 0x0f;
+ chip_id = name[5];
/* Check whether this chip is part of the saa711x series */
if (memcmp(name, "1f711", 5)) {
@@ -1482,8 +1480,14 @@
return -ENODEV;
}
- snprintf(client->name, sizeof(client->name) - 1, "saa711%d",chip_id);
- v4l_info(client, "saa711%d found (%s) @ 0x%x (%s)\n", chip_id, name, client->addr << 1, client->adapter->name);
+ /* Safety check */
+ if (!autodetect && id->name[6] != chip_id) {
+ v4l_warn(client, "found saa711%c while %s was expected\n",
+ chip_id, id->name);
+ }
+ snprintf(client->name, sizeof(client->name), "saa711%c", chip_id);
+ v4l_info(client, "saa711%c found (%s) @ 0x%x (%s)\n", chip_id, name,
+ client->addr << 1, client->adapter->name);
state = kzalloc(sizeof(struct saa711x_state), GFP_KERNEL);
i2c_set_clientdata(client, state);
@@ -1499,19 +1503,19 @@
state->hue = 0;
state->sat = 64;
switch (chip_id) {
- case 1:
+ case '1':
state->ident = V4L2_IDENT_SAA7111;
break;
- case 3:
+ case '3':
state->ident = V4L2_IDENT_SAA7113;
break;
- case 4:
+ case '4':
state->ident = V4L2_IDENT_SAA7114;
break;
- case 5:
+ case '5':
state->ident = V4L2_IDENT_SAA7115;
break;
- case 8:
+ case '8':
state->ident = V4L2_IDENT_SAA7118;
break;
default:
@@ -1553,6 +1557,17 @@
return 0;
}
+static const struct i2c_device_id saa7115_id[] = {
+ { "saa711x", 1 }, /* autodetect */
+ { "saa7111", 0 },
+ { "saa7113", 0 },
+ { "saa7114", 0 },
+ { "saa7115", 0 },
+ { "saa7118", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, saa7115_id);
+
static struct v4l2_i2c_driver_data v4l2_i2c_data = {
.name = "saa7115",
.driverid = I2C_DRIVERID_SAA711X,
@@ -1560,5 +1575,6 @@
.probe = saa7115_probe,
.remove = saa7115_remove,
.legacy_class = I2C_CLASS_TV_ANALOG | I2C_CLASS_TV_DIGITAL,
+ .id_table = saa7115_id,
};
diff --git a/drivers/media/video/saa7127.c b/drivers/media/video/saa7127.c
index e750cd6..79d11a6 100644
--- a/drivers/media/video/saa7127.c
+++ b/drivers/media/video/saa7127.c
@@ -672,8 +672,6 @@
if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -EIO;
- snprintf(client->name, sizeof(client->name) - 1, "saa7127");
-
v4l_dbg(1, debug, client, "detecting saa7127 client on address 0x%x\n",
client->addr << 1);
@@ -741,11 +739,18 @@
/* ----------------------------------------------------------------------- */
+static struct i2c_device_id saa7127_id[] = {
+ { "saa7127", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, saa7127_id);
+
static struct v4l2_i2c_driver_data v4l2_i2c_data = {
.name = "saa7127",
.driverid = I2C_DRIVERID_SAA7127,
.command = saa7127_command,
.probe = saa7127_probe,
.remove = saa7127_remove,
+ .id_table = saa7127_id,
};
diff --git a/drivers/media/video/saa7134/Kconfig b/drivers/media/video/saa7134/Kconfig
index 40e4c3b..83f076a 100644
--- a/drivers/media/video/saa7134/Kconfig
+++ b/drivers/media/video/saa7134/Kconfig
@@ -3,7 +3,7 @@
depends on VIDEO_DEV && PCI && I2C && INPUT
select VIDEOBUF_DMA_SG
select VIDEO_IR
- select MEDIA_TUNER
+ select VIDEO_TUNER
select VIDEO_TVEEPROM
select CRC32
---help---
@@ -27,6 +27,7 @@
config VIDEO_SAA7134_DVB
tristate "DVB/ATSC Support for saa7134 based TV cards"
depends on VIDEO_SAA7134 && DVB_CORE
+ depends on HOTPLUG # due to FW_LOADER
select VIDEOBUF_DVB
select FW_LOADER
select DVB_PLL if !DVB_FE_CUSTOMISE
diff --git a/drivers/media/video/saa7134/saa7134-core.c b/drivers/media/video/saa7134/saa7134-core.c
index eec1278..2c19cd0 100644
--- a/drivers/media/video/saa7134/saa7134-core.c
+++ b/drivers/media/video/saa7134/saa7134-core.c
@@ -864,7 +864,6 @@
struct saa7134_dev *dev;
struct saa7134_mpeg_ops *mops;
int err;
- int mask;
if (saa7134_devcount == SAA7134_MAXBOARDS)
return -ENOMEM;
@@ -1065,11 +1064,6 @@
if (TUNER_ABSENT != dev->tuner_type)
saa7134_i2c_call_clients(dev, TUNER_SET_STANDBY, NULL);
- if (card(dev).gpiomask != 0) {
- mask = card(dev).gpiomask;
- saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, mask, mask);
- saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, mask, 0);
- }
return 0;
fail4:
diff --git a/drivers/media/video/saa7134/saa7134-dvb.c b/drivers/media/video/saa7134/saa7134-dvb.c
index 2d16be2..469f93a 100644
--- a/drivers/media/video/saa7134/saa7134-dvb.c
+++ b/drivers/media/video/saa7134/saa7134-dvb.c
@@ -538,19 +538,23 @@
return 0;
}
-static void configure_tda827x_fe(struct saa7134_dev *dev, struct tda1004x_config *cdec_conf,
- struct tda827x_config *tuner_conf)
+static int configure_tda827x_fe(struct saa7134_dev *dev,
+ struct tda1004x_config *cdec_conf,
+ struct tda827x_config *tuner_conf)
{
dev->dvb.frontend = dvb_attach(tda10046_attach, cdec_conf, &dev->i2c_adap);
if (dev->dvb.frontend) {
if (cdec_conf->i2c_gate)
dev->dvb.frontend->ops.i2c_gate_ctrl = tda8290_i2c_gate_ctrl;
- if (dvb_attach(tda827x_attach, dev->dvb.frontend, cdec_conf->tuner_address,
- &dev->i2c_adap, tuner_conf) == NULL) {
- wprintk("no tda827x tuner found at addr: %02x\n",
+ if (dvb_attach(tda827x_attach, dev->dvb.frontend,
+ cdec_conf->tuner_address,
+ &dev->i2c_adap, tuner_conf))
+ return 0;
+
+ wprintk("no tda827x tuner found at addr: %02x\n",
cdec_conf->tuner_address);
- }
}
+ return -EINVAL;
}
/* ------------------------------------------------------------------ */
@@ -997,7 +1001,9 @@
break;
case SAA7134_BOARD_FLYDVBTDUO:
case SAA7134_BOARD_FLYDVBT_DUO_CARDBUS:
- configure_tda827x_fe(dev, &tda827x_lifeview_config, &tda827x_cfg_0);
+ if (configure_tda827x_fe(dev, &tda827x_lifeview_config,
+ &tda827x_cfg_0) < 0)
+ goto dettach_frontend;
break;
case SAA7134_BOARD_PHILIPS_EUROPA:
case SAA7134_BOARD_VIDEOMATE_DVBT_300:
@@ -1022,36 +1028,52 @@
}
break;
case SAA7134_BOARD_KWORLD_DVBT_210:
- configure_tda827x_fe(dev, &kworld_dvb_t_210_config, &tda827x_cfg_2);
+ if (configure_tda827x_fe(dev, &kworld_dvb_t_210_config,
+ &tda827x_cfg_2) < 0)
+ goto dettach_frontend;
break;
case SAA7134_BOARD_PHILIPS_TIGER:
- configure_tda827x_fe(dev, &philips_tiger_config, &tda827x_cfg_0);
+ if (configure_tda827x_fe(dev, &philips_tiger_config,
+ &tda827x_cfg_0) < 0)
+ goto dettach_frontend;
break;
case SAA7134_BOARD_PINNACLE_PCTV_310i:
- configure_tda827x_fe(dev, &pinnacle_pctv_310i_config, &tda827x_cfg_1);
+ if (configure_tda827x_fe(dev, &pinnacle_pctv_310i_config,
+ &tda827x_cfg_1) < 0)
+ goto dettach_frontend;
break;
case SAA7134_BOARD_HAUPPAUGE_HVR1110:
- configure_tda827x_fe(dev, &hauppauge_hvr_1110_config, &tda827x_cfg_1);
+ if (configure_tda827x_fe(dev, &hauppauge_hvr_1110_config,
+ &tda827x_cfg_1) < 0)
+ goto dettach_frontend;
break;
case SAA7134_BOARD_ASUSTeK_P7131_DUAL:
- configure_tda827x_fe(dev, &asus_p7131_dual_config, &tda827x_cfg_0);
+ if (configure_tda827x_fe(dev, &asus_p7131_dual_config,
+ &tda827x_cfg_0) < 0)
+ goto dettach_frontend;
break;
case SAA7134_BOARD_FLYDVBT_LR301:
- configure_tda827x_fe(dev, &tda827x_lifeview_config, &tda827x_cfg_0);
+ if (configure_tda827x_fe(dev, &tda827x_lifeview_config,
+ &tda827x_cfg_0) < 0)
+ goto dettach_frontend;
break;
case SAA7134_BOARD_FLYDVB_TRIO:
- if(! use_frontend) { /* terrestrial */
- configure_tda827x_fe(dev, &lifeview_trio_config, &tda827x_cfg_0);
+ if (!use_frontend) { /* terrestrial */
+ if (configure_tda827x_fe(dev, &lifeview_trio_config,
+ &tda827x_cfg_0) < 0)
+ goto dettach_frontend;
} else { /* satellite */
dev->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs, &dev->i2c_adap);
if (dev->dvb.frontend) {
if (dvb_attach(tda826x_attach, dev->dvb.frontend, 0x63,
&dev->i2c_adap, 0) == NULL) {
wprintk("%s: Lifeview Trio, No tda826x found!\n", __func__);
+ goto dettach_frontend;
}
if (dvb_attach(isl6421_attach, dev->dvb.frontend, &dev->i2c_adap,
0x08, 0, 0) == NULL) {
wprintk("%s: Lifeview Trio, No ISL6421 found!\n", __func__);
+ goto dettach_frontend;
}
}
}
@@ -1067,15 +1089,20 @@
&ads_duo_cfg) == NULL) {
wprintk("no tda827x tuner found at addr: %02x\n",
ads_tech_duo_config.tuner_address);
+ goto dettach_frontend;
}
}
break;
case SAA7134_BOARD_TEVION_DVBT_220RF:
- configure_tda827x_fe(dev, &tevion_dvbt220rf_config, &tda827x_cfg_0);
+ if (configure_tda827x_fe(dev, &tevion_dvbt220rf_config,
+ &tda827x_cfg_0) < 0)
+ goto dettach_frontend;
break;
case SAA7134_BOARD_MEDION_MD8800_QUADRO:
if (!use_frontend) { /* terrestrial */
- configure_tda827x_fe(dev, &md8800_dvbt_config, &tda827x_cfg_0);
+ if (configure_tda827x_fe(dev, &md8800_dvbt_config,
+ &tda827x_cfg_0) < 0)
+ goto dettach_frontend;
} else { /* satellite */
dev->dvb.frontend = dvb_attach(tda10086_attach,
&flydvbs, &dev->i2c_adap);
@@ -1086,16 +1113,20 @@
struct i2c_msg msg = {.addr = 0x08, .flags = 0, .len = 1};
if (dvb_attach(tda826x_attach, dev->dvb.frontend,
- 0x60, &dev->i2c_adap, 0) == NULL)
+ 0x60, &dev->i2c_adap, 0) == NULL) {
wprintk("%s: Medion Quadro, no tda826x "
"found !\n", __func__);
+ goto dettach_frontend;
+ }
if (dev_id != 0x08) {
/* we need to open the i2c gate (we know it exists) */
fe->ops.i2c_gate_ctrl(fe, 1);
if (dvb_attach(isl6405_attach, fe,
- &dev->i2c_adap, 0x08, 0, 0) == NULL)
+ &dev->i2c_adap, 0x08, 0, 0) == NULL) {
wprintk("%s: Medion Quadro, no ISL6405 "
"found !\n", __func__);
+ goto dettach_frontend;
+ }
if (dev_id == 0x07) {
/* fire up the 2nd section of the LNB supply since
we can't do this from the other section */
@@ -1117,19 +1148,17 @@
case SAA7134_BOARD_AVERMEDIA_AVERTVHD_A180:
dev->dvb.frontend = dvb_attach(nxt200x_attach, &avertvhda180,
&dev->i2c_adap);
- if (dev->dvb.frontend) {
+ if (dev->dvb.frontend)
dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x61,
NULL, DVB_PLL_TDHU2);
- }
break;
case SAA7134_BOARD_KWORLD_ATSC110:
dev->dvb.frontend = dvb_attach(nxt200x_attach, &kworldatsc110,
&dev->i2c_adap);
- if (dev->dvb.frontend) {
+ if (dev->dvb.frontend)
dvb_attach(simple_tuner_attach, dev->dvb.frontend,
&dev->i2c_adap, 0x61,
TUNER_PHILIPS_TUV1236D);
- }
break;
case SAA7134_BOARD_FLYDVBS_LR300:
dev->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs,
@@ -1138,10 +1167,12 @@
if (dvb_attach(tda826x_attach, dev->dvb.frontend, 0x60,
&dev->i2c_adap, 0) == NULL) {
wprintk("%s: No tda826x found!\n", __func__);
+ goto dettach_frontend;
}
if (dvb_attach(isl6421_attach, dev->dvb.frontend,
&dev->i2c_adap, 0x08, 0, 0) == NULL) {
wprintk("%s: No ISL6421 found!\n", __func__);
+ goto dettach_frontend;
}
}
break;
@@ -1168,43 +1199,65 @@
}
break;
case SAA7134_BOARD_CINERGY_HT_PCMCIA:
- configure_tda827x_fe(dev, &cinergy_ht_config, &tda827x_cfg_0);
+ if (configure_tda827x_fe(dev, &cinergy_ht_config,
+ &tda827x_cfg_0) < 0)
+ goto dettach_frontend;
break;
case SAA7134_BOARD_CINERGY_HT_PCI:
- configure_tda827x_fe(dev, &cinergy_ht_pci_config, &tda827x_cfg_0);
+ if (configure_tda827x_fe(dev, &cinergy_ht_pci_config,
+ &tda827x_cfg_0) < 0)
+ goto dettach_frontend;
break;
case SAA7134_BOARD_PHILIPS_TIGER_S:
- configure_tda827x_fe(dev, &philips_tiger_s_config, &tda827x_cfg_2);
+ if (configure_tda827x_fe(dev, &philips_tiger_s_config,
+ &tda827x_cfg_2) < 0)
+ goto dettach_frontend;
break;
case SAA7134_BOARD_ASUS_P7131_4871:
- configure_tda827x_fe(dev, &asus_p7131_4871_config, &tda827x_cfg_2);
+ if (configure_tda827x_fe(dev, &asus_p7131_4871_config,
+ &tda827x_cfg_2) < 0)
+ goto dettach_frontend;
break;
case SAA7134_BOARD_ASUSTeK_P7131_HYBRID_LNA:
- configure_tda827x_fe(dev, &asus_p7131_hybrid_lna_config, &tda827x_cfg_2);
+ if (configure_tda827x_fe(dev, &asus_p7131_hybrid_lna_config,
+ &tda827x_cfg_2) < 0)
+ goto dettach_frontend;
break;
case SAA7134_BOARD_AVERMEDIA_SUPER_007:
- configure_tda827x_fe(dev, &avermedia_super_007_config, &tda827x_cfg_0);
+ if (configure_tda827x_fe(dev, &avermedia_super_007_config,
+ &tda827x_cfg_0) < 0)
+ goto dettach_frontend;
break;
case SAA7134_BOARD_TWINHAN_DTV_DVB_3056:
- configure_tda827x_fe(dev, &twinhan_dtv_dvb_3056_config, &tda827x_cfg_2_sw42);
+ if (configure_tda827x_fe(dev, &twinhan_dtv_dvb_3056_config,
+ &tda827x_cfg_2_sw42) < 0)
+ goto dettach_frontend;
break;
case SAA7134_BOARD_PHILIPS_SNAKE:
dev->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs,
&dev->i2c_adap);
if (dev->dvb.frontend) {
if (dvb_attach(tda826x_attach, dev->dvb.frontend, 0x60,
- &dev->i2c_adap, 0) == NULL)
+ &dev->i2c_adap, 0) == NULL) {
wprintk("%s: No tda826x found!\n", __func__);
+ goto dettach_frontend;
+ }
if (dvb_attach(lnbp21_attach, dev->dvb.frontend,
- &dev->i2c_adap, 0, 0) == NULL)
+ &dev->i2c_adap, 0, 0) == NULL) {
wprintk("%s: No lnbp21 found!\n", __func__);
+ goto dettach_frontend;
+ }
}
break;
case SAA7134_BOARD_CREATIX_CTX953:
- configure_tda827x_fe(dev, &md8800_dvbt_config, &tda827x_cfg_0);
+ if (configure_tda827x_fe(dev, &md8800_dvbt_config,
+ &tda827x_cfg_0) < 0)
+ goto dettach_frontend;
break;
case SAA7134_BOARD_MSI_TVANYWHERE_AD11:
- configure_tda827x_fe(dev, &philips_tiger_s_config, &tda827x_cfg_2);
+ if (configure_tda827x_fe(dev, &philips_tiger_s_config,
+ &tda827x_cfg_2) < 0)
+ goto dettach_frontend;
break;
case SAA7134_BOARD_AVERMEDIA_CARDBUS_506:
dev->dvb.frontend = dvb_attach(mt352_attach,
@@ -1218,16 +1271,20 @@
if (dev->dvb.frontend) {
struct dvb_frontend *fe;
if (dvb_attach(dvb_pll_attach, dev->dvb.frontend, 0x60,
- &dev->i2c_adap, DVB_PLL_PHILIPS_SD1878_TDA8261) == NULL)
+ &dev->i2c_adap, DVB_PLL_PHILIPS_SD1878_TDA8261) == NULL) {
wprintk("%s: MD7134 DVB-S, no SD1878 "
"found !\n", __func__);
+ goto dettach_frontend;
+ }
/* we need to open the i2c gate (we know it exists) */
fe = dev->dvb.frontend;
fe->ops.i2c_gate_ctrl(fe, 1);
if (dvb_attach(isl6405_attach, fe,
- &dev->i2c_adap, 0x08, 0, 0) == NULL)
+ &dev->i2c_adap, 0x08, 0, 0) == NULL) {
wprintk("%s: MD7134 DVB-S, no ISL6405 "
"found !\n", __func__);
+ goto dettach_frontend;
+ }
fe->ops.i2c_gate_ctrl(fe, 0);
dev->original_set_voltage = fe->ops.set_voltage;
fe->ops.set_voltage = md8800_set_voltage;
@@ -1254,10 +1311,7 @@
if (!fe) {
printk(KERN_ERR "%s/2: xc3028 attach failed\n",
dev->name);
- dvb_frontend_detach(dev->dvb.frontend);
- dvb_unregister_frontend(dev->dvb.frontend);
- dev->dvb.frontend = NULL;
- return -1;
+ goto dettach_frontend;
}
}
@@ -1282,6 +1336,12 @@
dev->dvb.frontend->ops.tuner_ops.sleep(dev->dvb.frontend);
}
return ret;
+
+dettach_frontend:
+ dvb_frontend_detach(dev->dvb.frontend);
+ dev->dvb.frontend = NULL;
+
+ return -1;
}
static int dvb_fini(struct saa7134_dev *dev)
diff --git a/drivers/media/video/saa7134/saa7134-empress.c b/drivers/media/video/saa7134/saa7134-empress.c
index 1314522..81431ee 100644
--- a/drivers/media/video/saa7134/saa7134-empress.c
+++ b/drivers/media/video/saa7134/saa7134-empress.c
@@ -163,8 +163,7 @@
static int empress_querycap(struct file *file, void *priv,
struct v4l2_capability *cap)
{
- struct saa7134_fh *fh = priv;
- struct saa7134_dev *dev = fh->dev;
+ struct saa7134_dev *dev = file->private_data;
strcpy(cap->driver, "saa7134");
strlcpy(cap->card, saa7134_boards[dev->board].name,
diff --git a/drivers/media/video/saa717x.c b/drivers/media/video/saa717x.c
index 72c4081..2220f95 100644
--- a/drivers/media/video/saa717x.c
+++ b/drivers/media/video/saa717x.c
@@ -1429,8 +1429,6 @@
if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -EIO;
- snprintf(client->name, sizeof(client->name) - 1, "saa717x");
-
if (saa717x_write(client, 0x5a4, 0xfe) &&
saa717x_write(client, 0x5a5, 0x0f) &&
saa717x_write(client, 0x5a6, 0x00) &&
@@ -1507,6 +1505,12 @@
/* ----------------------------------------------------------------------- */
+static const struct i2c_device_id saa717x_id[] = {
+ { "saa717x", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, saa717x_id);
+
static struct v4l2_i2c_driver_data v4l2_i2c_data = {
.name = "saa717x",
.driverid = I2C_DRIVERID_SAA717X,
@@ -1514,4 +1518,5 @@
.probe = saa717x_probe,
.remove = saa717x_remove,
.legacy_class = I2C_CLASS_TV_ANALOG | I2C_CLASS_TV_DIGITAL,
+ .id_table = saa717x_id,
};
diff --git a/drivers/media/video/sn9c102/sn9c102_core.c b/drivers/media/video/sn9c102/sn9c102_core.c
index 5748b1e..7f9c7bc 100644
--- a/drivers/media/video/sn9c102/sn9c102_core.c
+++ b/drivers/media/video/sn9c102/sn9c102_core.c
@@ -34,7 +34,7 @@
#include <linux/mm.h>
#include <linux/vmalloc.h>
#include <linux/page-flags.h>
-#include <linux/byteorder/generic.h>
+#include <asm/byteorder.h>
#include <asm/page.h>
#include <asm/uaccess.h>
diff --git a/drivers/media/video/stk-webcam.c b/drivers/media/video/stk-webcam.c
index 9276ed9..b12c60c 100644
--- a/drivers/media/video/stk-webcam.c
+++ b/drivers/media/video/stk-webcam.c
@@ -30,6 +30,7 @@
#include <linux/kref.h>
#include <linux/usb.h>
+#include <linux/mm.h>
#include <linux/vmalloc.h>
#include <linux/videodev2.h>
#include <media/v4l2-common.h>
@@ -245,6 +246,8 @@
return -1;
}
+#ifdef CONFIG_VIDEO_V4L1_COMPAT
+
/* sysfs functions */
/*FIXME cleanup this */
@@ -350,6 +353,10 @@
video_device_remove_file(vdev, &dev_attr_vflip);
}
+#else
+#define stk_create_sysfs_files(a)
+#define stk_remove_sysfs_files(a)
+#endif
/* *********************************************** */
/*
diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c
index 6bf104e..0d12ace 100644
--- a/drivers/media/video/tuner-core.c
+++ b/drivers/media/video/tuner-core.c
@@ -40,11 +40,11 @@
typeof(&FUNCTION) __a = symbol_request(FUNCTION); \
if (__a) { \
__r = (int) __a(ARGS); \
+ symbol_put(FUNCTION); \
} else { \
printk(KERN_ERR "TUNER: Unable to find " \
"symbol "#FUNCTION"()\n"); \
} \
- symbol_put(FUNCTION); \
__r; \
})
@@ -92,6 +92,7 @@
unsigned int type; /* chip type id */
unsigned int config;
int (*tuner_callback) (void *dev, int command, int arg);
+ const char *name;
};
/* standard i2c insmod options */
@@ -330,26 +331,16 @@
tuner_warn("Support for tuners in i2c address range 0x64 thru 0x6f\n");
tuner_warn("will soon be dropped. This message indicates that your\n");
tuner_warn("hardware has a %s tuner at i2c address 0x%02x.\n",
- t->i2c->name, t->i2c->addr);
+ t->name, t->i2c->addr);
tuner_warn("To ensure continued support for your device, please\n");
tuner_warn("send a copy of this message, along with full dmesg\n");
tuner_warn("output to v4l-dvb-maintainer@linuxtv.org\n");
tuner_warn("Please use subject line: \"obsolete tuner i2c address.\"\n");
tuner_warn("driver: %s, addr: 0x%02x, type: %d (%s)\n",
- t->i2c->adapter->name, t->i2c->addr, t->type, t->i2c->name);
+ t->i2c->adapter->name, t->i2c->addr, t->type, t->name);
tuner_warn("====================== WARNING! ======================\n");
}
-static void attach_tda829x(struct tuner *t)
-{
- struct tda829x_config cfg = {
- .lna_cfg = t->config,
- .tuner_callback = t->tuner_callback,
- };
- dvb_attach(tda829x_attach,
- &t->fe, t->i2c->adapter, t->i2c->addr, &cfg);
-}
-
static struct xc5000_config xc5000_cfg;
static void set_type(struct i2c_client *c, unsigned int type,
@@ -385,12 +376,19 @@
switch (t->type) {
case TUNER_MT2032:
- dvb_attach(microtune_attach,
- &t->fe, t->i2c->adapter, t->i2c->addr);
+ if (!dvb_attach(microtune_attach,
+ &t->fe, t->i2c->adapter, t->i2c->addr))
+ goto attach_failed;
break;
case TUNER_PHILIPS_TDA8290:
{
- attach_tda829x(t);
+ struct tda829x_config cfg = {
+ .lna_cfg = t->config,
+ .tuner_callback = t->tuner_callback,
+ };
+ if (!dvb_attach(tda829x_attach, &t->fe, t->i2c->adapter,
+ t->i2c->addr, &cfg))
+ goto attach_failed;
break;
}
case TUNER_TEA5767:
@@ -441,8 +439,9 @@
break;
}
case TUNER_TDA9887:
- dvb_attach(tda9887_attach,
- &t->fe, t->i2c->adapter, t->i2c->addr);
+ if (!dvb_attach(tda9887_attach,
+ &t->fe, t->i2c->adapter, t->i2c->addr))
+ goto attach_failed;
break;
case TUNER_XC5000:
{
@@ -450,10 +449,10 @@
xc5000_cfg.i2c_address = t->i2c->addr;
xc5000_cfg.if_khz = 5380;
- xc5000_cfg.priv = c->adapter->algo_data;
xc5000_cfg.tuner_callback = t->tuner_callback;
if (!dvb_attach(xc5000_attach,
- &t->fe, t->i2c->adapter, &xc5000_cfg))
+ &t->fe, t->i2c->adapter, &xc5000_cfg,
+ c->adapter->algo_data))
goto attach_failed;
xc_tuner_ops = &t->fe.ops.tuner_ops;
@@ -472,19 +471,17 @@
if ((NULL == analog_ops->set_params) &&
(fe_tuner_ops->set_analog_params)) {
- strlcpy(t->i2c->name, fe_tuner_ops->info.name,
- sizeof(t->i2c->name));
+ t->name = fe_tuner_ops->info.name;
t->fe.analog_demod_priv = t;
memcpy(analog_ops, &tuner_core_ops,
sizeof(struct analog_demod_ops));
} else {
- strlcpy(t->i2c->name, analog_ops->info.name,
- sizeof(t->i2c->name));
+ t->name = analog_ops->info.name;
}
- tuner_dbg("type set to %s\n", t->i2c->name);
+ tuner_dbg("type set to %s\n", t->name);
if (t->mode_mask == T_UNINITIALIZED)
t->mode_mask = new_mode_mask;
@@ -539,7 +536,7 @@
static inline int check_mode(struct tuner *t, char *cmd)
{
if ((1 << t->mode & t->mode_mask) == 0) {
- return EINVAL;
+ return -EINVAL;
}
switch (t->mode) {
@@ -733,11 +730,11 @@
t->mode = mode;
- if (check_mode(t, cmd) == EINVAL) {
+ if (check_mode(t, cmd) == -EINVAL) {
t->mode = T_STANDBY;
if (analog_ops->standby)
analog_ops->standby(&t->fe);
- return EINVAL;
+ return -EINVAL;
}
return 0;
}
@@ -779,13 +776,13 @@
break;
case AUDC_SET_RADIO:
if (set_mode(client, t, V4L2_TUNER_RADIO, "AUDC_SET_RADIO")
- == EINVAL)
+ == -EINVAL)
return 0;
if (t->radio_freq)
set_freq(client, t->radio_freq);
break;
case TUNER_SET_STANDBY:
- if (check_mode(t, "TUNER_SET_STANDBY") == EINVAL)
+ if (check_mode(t, "TUNER_SET_STANDBY") == -EINVAL)
return 0;
t->mode = T_STANDBY;
if (analog_ops->standby)
@@ -793,9 +790,9 @@
break;
#ifdef CONFIG_VIDEO_ALLOW_V4L1
case VIDIOCSAUDIO:
- if (check_mode(t, "VIDIOCSAUDIO") == EINVAL)
+ if (check_mode(t, "VIDIOCSAUDIO") == -EINVAL)
return 0;
- if (check_v4l2(t) == EINVAL)
+ if (check_v4l2(t) == -EINVAL)
return 0;
/* Should be implemented, since bttv calls it */
@@ -813,10 +810,10 @@
};
struct video_channel *vc = arg;
- if (check_v4l2(t) == EINVAL)
+ if (check_v4l2(t) == -EINVAL)
return 0;
- if (set_mode(client,t,V4L2_TUNER_ANALOG_TV, "VIDIOCSCHAN")==EINVAL)
+ if (set_mode(client,t,V4L2_TUNER_ANALOG_TV, "VIDIOCSCHAN")==-EINVAL)
return 0;
if (vc->norm < ARRAY_SIZE(map))
@@ -830,9 +827,9 @@
{
unsigned long *v = arg;
- if (check_mode(t, "VIDIOCSFREQ") == EINVAL)
+ if (check_mode(t, "VIDIOCSFREQ") == -EINVAL)
return 0;
- if (check_v4l2(t) == EINVAL)
+ if (check_v4l2(t) == -EINVAL)
return 0;
set_freq(client, *v);
@@ -842,9 +839,9 @@
{
struct video_tuner *vt = arg;
- if (check_mode(t, "VIDIOCGTUNER") == EINVAL)
+ if (check_mode(t, "VIDIOCGTUNER") == -EINVAL)
return 0;
- if (check_v4l2(t) == EINVAL)
+ if (check_v4l2(t) == -EINVAL)
return 0;
if (V4L2_TUNER_RADIO == t->mode) {
@@ -886,9 +883,9 @@
{
struct video_audio *va = arg;
- if (check_mode(t, "VIDIOCGAUDIO") == EINVAL)
+ if (check_mode(t, "VIDIOCGAUDIO") == -EINVAL)
return 0;
- if (check_v4l2(t) == EINVAL)
+ if (check_v4l2(t) == -EINVAL)
return 0;
if (V4L2_TUNER_RADIO == t->mode) {
@@ -928,7 +925,7 @@
v4l2_std_id *id = arg;
if (set_mode (client, t, V4L2_TUNER_ANALOG_TV, "VIDIOC_S_STD")
- == EINVAL)
+ == -EINVAL)
return 0;
switch_v4l2();
@@ -944,7 +941,7 @@
struct v4l2_frequency *f = arg;
if (set_mode (client, t, f->type, "VIDIOC_S_FREQUENCY")
- == EINVAL)
+ == -EINVAL)
return 0;
switch_v4l2();
set_freq(client,f->frequency);
@@ -955,7 +952,7 @@
{
struct v4l2_frequency *f = arg;
- if (check_mode(t, "VIDIOC_G_FREQUENCY") == EINVAL)
+ if (check_mode(t, "VIDIOC_G_FREQUENCY") == -EINVAL)
return 0;
switch_v4l2();
f->type = t->mode;
@@ -976,7 +973,7 @@
{
struct v4l2_tuner *tuner = arg;
- if (check_mode(t, "VIDIOC_G_TUNER") == EINVAL)
+ if (check_mode(t, "VIDIOC_G_TUNER") == -EINVAL)
return 0;
switch_v4l2();
@@ -1023,7 +1020,7 @@
{
struct v4l2_tuner *tuner = arg;
- if (check_mode(t, "VIDIOC_S_TUNER") == EINVAL)
+ if (check_mode(t, "VIDIOC_S_TUNER") == -EINVAL)
return 0;
switch_v4l2();
@@ -1117,7 +1114,7 @@
if (NULL == t)
return -ENOMEM;
t->i2c = client;
- strlcpy(client->name, "(tuner unset)", sizeof(client->name));
+ t->name = "(tuner unset)";
i2c_set_clientdata(client, t);
t->type = UNSET;
t->audmode = V4L2_TUNER_MODE_STEREO;
@@ -1167,7 +1164,7 @@
/* If chip is not tda8290, don't register.
since it can be tda9887*/
if (tuner_symbol_probe(tda829x_probe, t->i2c->adapter,
- t->i2c->addr) == 0) {
+ t->i2c->addr) >= 0) {
tuner_dbg("tda829x detected\n");
} else {
/* Default is being tda9887 */
@@ -1181,7 +1178,7 @@
case 0x60:
if (tuner_symbol_probe(tea5767_autodetection,
t->i2c->adapter, t->i2c->addr)
- != EINVAL) {
+ >= 0) {
t->type = TUNER_TEA5767;
t->mode_mask = T_RADIO;
t->mode = T_STANDBY;
@@ -1280,6 +1277,15 @@
/* ----------------------------------------------------------------------- */
+/* This driver supports many devices and the idea is to let the driver
+ detect which device is present. So rather than listing all supported
+ devices here, we pretend to support a single, fake device type. */
+static const struct i2c_device_id tuner_id[] = {
+ { "tuner", }, /* autodetect */
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, tuner_id);
+
static struct v4l2_i2c_driver_data v4l2_i2c_data = {
.name = "tuner",
.driverid = I2C_DRIVERID_TUNER,
@@ -1289,6 +1295,7 @@
.suspend = tuner_suspend,
.resume = tuner_resume,
.legacy_probe = tuner_legacy_probe,
+ .id_table = tuner_id,
};
diff --git a/drivers/media/video/tveeprom.c b/drivers/media/video/tveeprom.c
index 3cf8a8e..9da0e18 100644
--- a/drivers/media/video/tveeprom.c
+++ b/drivers/media/video/tveeprom.c
@@ -319,10 +319,12 @@
{AUDIO_CHIP_INTERNAL, "CX25843"},
{AUDIO_CHIP_INTERNAL, "CX23418"},
{AUDIO_CHIP_INTERNAL, "CX23885"},
- /* 40-42 */
+ /* 40-44 */
{AUDIO_CHIP_INTERNAL, "CX23888"},
{AUDIO_CHIP_INTERNAL, "SAA7131"},
{AUDIO_CHIP_INTERNAL, "CX23887"},
+ {AUDIO_CHIP_INTERNAL, "SAA7164"},
+ {AUDIO_CHIP_INTERNAL, "AU8522"},
};
/* This list is supplied by Hauppauge. Thanks! */
@@ -341,8 +343,10 @@
"CX882", "TVP5150A", "CX25840", "CX25841", "CX25842",
/* 30-34 */
"CX25843", "CX23418", "NEC61153", "CX23885", "CX23888",
- /* 35-37 */
- "SAA7131", "CX25837", "CX23887"
+ /* 35-39 */
+ "SAA7131", "CX25837", "CX23887", "CX23885A", "CX23887A",
+ /* 40-42 */
+ "SAA7164", "CX23885B", "AU8522"
};
static int hasRadioTuner(int tunerType)
diff --git a/drivers/media/video/upd64031a.c b/drivers/media/video/upd64031a.c
index 93bfd19d..b462887 100644
--- a/drivers/media/video/upd64031a.c
+++ b/drivers/media/video/upd64031a.c
@@ -228,6 +228,11 @@
/* ----------------------------------------------------------------------- */
+static const struct i2c_device_id upd64031a_id[] = {
+ { "upd64031a", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, upd64031a_id);
static struct v4l2_i2c_driver_data v4l2_i2c_data = {
.name = "upd64031a",
@@ -235,4 +240,5 @@
.command = upd64031a_command,
.probe = upd64031a_probe,
.remove = upd64031a_remove,
+ .id_table = upd64031a_id,
};
diff --git a/drivers/media/video/upd64083.c b/drivers/media/video/upd64083.c
index 9ab712a..9521ce0 100644
--- a/drivers/media/video/upd64083.c
+++ b/drivers/media/video/upd64083.c
@@ -205,6 +205,11 @@
/* ----------------------------------------------------------------------- */
+static const struct i2c_device_id upd64083_id[] = {
+ { "upd64083", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, upd64083_id);
static struct v4l2_i2c_driver_data v4l2_i2c_data = {
.name = "upd64083",
@@ -212,4 +217,5 @@
.command = upd64083_command,
.probe = upd64083_probe,
.remove = upd64083_remove,
+ .id_table = upd64083_id,
};
diff --git a/drivers/media/video/usbvideo/quickcam_messenger.c b/drivers/media/video/usbvideo/quickcam_messenger.c
index 32e536e..3d26a30 100644
--- a/drivers/media/video/usbvideo/quickcam_messenger.c
+++ b/drivers/media/video/usbvideo/quickcam_messenger.c
@@ -210,7 +210,7 @@
return ret;
}
-static int qcm_stv_setw(struct usb_device *dev, u16 reg, u16 val)
+static int qcm_stv_setw(struct usb_device *dev, u16 reg, __le16 val)
{
int ret;
diff --git a/drivers/media/video/usbvision/Kconfig b/drivers/media/video/usbvision/Kconfig
index 74e1d30..fc24ef0 100644
--- a/drivers/media/video/usbvision/Kconfig
+++ b/drivers/media/video/usbvision/Kconfig
@@ -1,7 +1,7 @@
config VIDEO_USBVISION
tristate "USB video devices based on Nogatech NT1003/1004/1005"
depends on I2C && VIDEO_V4L2
- select MEDIA_TUNER
+ select VIDEO_TUNER
select VIDEO_SAA711X if VIDEO_HELPER_CHIPS_AUTO
---help---
There are more than 50 different USB video devices based on
diff --git a/drivers/media/video/videobuf-core.c b/drivers/media/video/videobuf-core.c
index 982f446..0a88c44 100644
--- a/drivers/media/video/videobuf-core.c
+++ b/drivers/media/video/videobuf-core.c
@@ -331,7 +331,7 @@
}
/* Locking: Caller holds q->vb_lock */
-static int __videobuf_mmap_setup(struct videobuf_queue *q,
+int __videobuf_mmap_setup(struct videobuf_queue *q,
unsigned int bcount, unsigned int bsize,
enum v4l2_memory memory)
{
@@ -1129,6 +1129,7 @@
EXPORT_SYMBOL_GPL(videobuf_read_one);
EXPORT_SYMBOL_GPL(videobuf_poll_stream);
+EXPORT_SYMBOL_GPL(__videobuf_mmap_setup);
EXPORT_SYMBOL_GPL(videobuf_mmap_setup);
EXPORT_SYMBOL_GPL(videobuf_mmap_free);
EXPORT_SYMBOL_GPL(videobuf_mmap_mapper);
diff --git a/drivers/media/video/vp27smpx.c b/drivers/media/video/vp27smpx.c
index fac0deb..a1f76ee 100644
--- a/drivers/media/video/vp27smpx.c
+++ b/drivers/media/video/vp27smpx.c
@@ -130,8 +130,6 @@
if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -EIO;
- snprintf(client->name, sizeof(client->name) - 1, "vp27smpx");
-
v4l_info(client, "chip found @ 0x%x (%s)\n",
client->addr << 1, client->adapter->name);
@@ -154,11 +152,18 @@
/* ----------------------------------------------------------------------- */
+static const struct i2c_device_id vp27smpx_id[] = {
+ { "vp27smpx", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, vp27smpx_id);
+
static struct v4l2_i2c_driver_data v4l2_i2c_data = {
.name = "vp27smpx",
.driverid = I2C_DRIVERID_VP27SMPX,
.command = vp27smpx_command,
.probe = vp27smpx_probe,
.remove = vp27smpx_remove,
+ .id_table = vp27smpx_id,
};
diff --git a/drivers/media/video/wm8739.c b/drivers/media/video/wm8739.c
index 0f8ed84..fc50299 100644
--- a/drivers/media/video/wm8739.c
+++ b/drivers/media/video/wm8739.c
@@ -313,11 +313,18 @@
return 0;
}
+static const struct i2c_device_id wm8739_id[] = {
+ { "wm8739", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, wm8739_id);
+
static struct v4l2_i2c_driver_data v4l2_i2c_data = {
.name = "wm8739",
.driverid = I2C_DRIVERID_WM8739,
.command = wm8739_command,
.probe = wm8739_probe,
.remove = wm8739_remove,
+ .id_table = wm8739_id,
};
diff --git a/drivers/media/video/wm8775.c b/drivers/media/video/wm8775.c
index 67a409e..506378a5 100644
--- a/drivers/media/video/wm8775.c
+++ b/drivers/media/video/wm8775.c
@@ -216,11 +216,18 @@
return 0;
}
+static const struct i2c_device_id wm8775_id[] = {
+ { "wm8775", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, wm8775_id);
+
static struct v4l2_i2c_driver_data v4l2_i2c_data = {
.name = "wm8775",
.driverid = I2C_DRIVERID_WM8775,
.command = wm8775_command,
.probe = wm8775_probe,
.remove = wm8775_remove,
+ .id_table = wm8775_id,
};
diff --git a/drivers/media/video/zc0301/zc0301_core.c b/drivers/media/video/zc0301/zc0301_core.c
index 363dd2b..e5c4e9f 100644
--- a/drivers/media/video/zc0301/zc0301_core.c
+++ b/drivers/media/video/zc0301/zc0301_core.c
@@ -38,7 +38,7 @@
#include <linux/mm.h>
#include <linux/vmalloc.h>
#include <linux/page-flags.h>
-#include <linux/byteorder/generic.h>
+#include <asm/byteorder.h>
#include <asm/page.h>
#include <asm/uaccess.h>
diff --git a/drivers/media/video/zoran.h b/drivers/media/video/zoran.h
index 81cc3b0..46b7ad4 100644
--- a/drivers/media/video/zoran.h
+++ b/drivers/media/video/zoran.h
@@ -285,7 +285,7 @@
struct zoran_jpg_buffer {
struct zoran_mapping *map;
- u32 *frag_tab; /* addresses of frag table */
+ __le32 *frag_tab; /* addresses of frag table */
u32 frag_tab_bus; /* same value cached to save time in ISR */
enum zoran_buffer_state state; /* non-zero if corresponding buffer is in use in grab queue */
struct zoran_sync bs; /* DONE: info to return to application */
@@ -450,7 +450,7 @@
unsigned long jpg_queued_num; /* count of frames queued since grab/play started */
/* zr36057's code buffer table */
- u32 *stat_com; /* stat_com[i] is indexed by dma_head/tail & BUZ_MASK_STAT_COM */
+ __le32 *stat_com; /* stat_com[i] is indexed by dma_head/tail & BUZ_MASK_STAT_COM */
/* (value & BUZ_MASK_FRAME) corresponds to index in pend[] queue */
int jpg_pend[BUZ_MAX_FRAME];
diff --git a/drivers/media/video/zoran_device.c b/drivers/media/video/zoran_device.c
index 7b60533..88d3697 100644
--- a/drivers/media/video/zoran_device.c
+++ b/drivers/media/video/zoran_device.c
@@ -31,7 +31,6 @@
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/vmalloc.h>
-#include <linux/byteorder/generic.h>
#include <linux/interrupt.h>
#include <linux/proc_fs.h>
@@ -47,6 +46,7 @@
#include <linux/delay.h>
#include <linux/wait.h>
+#include <asm/byteorder.h>
#include <asm/io.h>
#include "videocodec.h"
@@ -1320,7 +1320,7 @@
if (i) {
/* Rotate stat_comm entries to make current entry first */
int j;
- u32 bus_addr[BUZ_NUM_STAT_COM];
+ __le32 bus_addr[BUZ_NUM_STAT_COM];
/* Here we are copying the stat_com array, which
* is already in little endian format, so
diff --git a/drivers/media/video/zoran_driver.c b/drivers/media/video/zoran_driver.c
index 0134bec..5394d7a 100644
--- a/drivers/media/video/zoran_driver.c
+++ b/drivers/media/video/zoran_driver.c
@@ -52,7 +52,6 @@
#include <linux/pci.h>
#include <linux/vmalloc.h>
#include <linux/wait.h>
-#include <linux/byteorder/generic.h>
#include <linux/interrupt.h>
#include <linux/i2c.h>
@@ -74,6 +73,7 @@
#include <media/v4l2-common.h>
#include "videocodec.h"
+#include <asm/byteorder.h>
#include <asm/io.h>
#include <asm/uaccess.h>
#include <linux/proc_fs.h>
@@ -495,7 +495,7 @@
jpg_fbuffer_free(file);
return -ENOBUFS;
}
- fh->jpg_buffers.buffer[i].frag_tab = (u32 *) mem;
+ fh->jpg_buffers.buffer[i].frag_tab = (__le32 *) mem;
fh->jpg_buffers.buffer[i].frag_tab_bus =
virt_to_bus((void *) mem);
@@ -1167,7 +1167,7 @@
/* v4l capture */
if (fh->v4l_buffers.active != ZORAN_FREE) {
- long flags;
+ unsigned long flags;
spin_lock_irqsave(&zr->spinlock, flags);
zr36057_set_memgrab(zr, 0);
@@ -3436,7 +3436,7 @@
/* unload capture */
if (zr->v4l_memgrab_active) {
- long flags;
+ unsigned long flags;
spin_lock_irqsave(&zr->spinlock, flags);
zr36057_set_memgrab(zr, 0);
@@ -4375,7 +4375,7 @@
mutex_lock(&zr->resource_lock);
if (fh->v4l_buffers.active != ZORAN_FREE) {
- long flags;
+ unsigned long flags;
spin_lock_irqsave(&zr->spinlock, flags);
zr36057_set_memgrab(zr, 0);
@@ -4506,7 +4506,7 @@
if (todo > fraglen)
todo = fraglen;
pos =
- le32_to_cpu((unsigned long) fh->jpg_buffers.
+ le32_to_cpu(fh->jpg_buffers.
buffer[i].frag_tab[2 * j]);
/* should just be pos on i386 */
page = virt_to_phys(bus_to_virt(pos))
diff --git a/drivers/message/fusion/mptfc.c b/drivers/message/fusion/mptfc.c
index 3cdd4e9..1e24ab4 100644
--- a/drivers/message/fusion/mptfc.c
+++ b/drivers/message/fusion/mptfc.c
@@ -1238,8 +1238,6 @@
sh->max_id = ioc->pfacts->MaxDevices;
sh->max_lun = max_lun;
- sh->this_id = ioc->pfacts[0].PortSCSIID;
-
/* Required entry.
*/
sh->unique_id = ioc->id;
diff --git a/drivers/message/fusion/mptsas.c b/drivers/message/fusion/mptsas.c
index 4684807..4d492ba 100644
--- a/drivers/message/fusion/mptsas.c
+++ b/drivers/message/fusion/mptsas.c
@@ -3193,8 +3193,6 @@
sh->transportt = mptsas_transport_template;
- sh->this_id = ioc->pfacts[0].PortSCSIID;
-
/* Required entry.
*/
sh->unique_id = ioc->id;
diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c
index b109bd8..c68ef00 100644
--- a/drivers/message/fusion/mptscsih.c
+++ b/drivers/message/fusion/mptscsih.c
@@ -2451,12 +2451,6 @@
ioc->name, sdev->sdtr, sdev->wdtr,
sdev->ppr, sdev->inquiry_len));
- if (sdev->id > sh->max_id) {
- /* error case, should never happen */
- scsi_adjust_queue_depth(sdev, 0, 1);
- goto slave_configure_exit;
- }
-
vdevice->configured_lun = 1;
mptscsih_change_queue_depth(sdev, MPT_SCSI_CMD_PER_DEV_HIGH);
@@ -2470,8 +2464,6 @@
ioc->name, vtarget->negoFlags, vtarget->maxOffset,
vtarget->minSyncFactor));
-slave_configure_exit:
-
dsprintk(ioc, printk(MYIOC_s_DEBUG_FMT
"tagged %d, simple %d, ordered %d\n",
ioc->name,sdev->tagged_supported, sdev->simple_tags,
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 2566479..ae96bd6 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -24,7 +24,7 @@
config HTC_EGPIO
bool "HTC EGPIO support"
- depends on GENERIC_HARDIRQS && HAVE_GPIO_LIB
+ depends on GENERIC_HARDIRQS && HAVE_GPIO_LIB && ARM
help
This driver supports the CPLD egpio chip present on
several HTC phones. It provides basic support for input
diff --git a/drivers/misc/fujitsu-laptop.c b/drivers/misc/fujitsu-laptop.c
index e2e7c05..6d14e8f 100644
--- a/drivers/misc/fujitsu-laptop.c
+++ b/drivers/misc/fujitsu-laptop.c
@@ -352,3 +352,9 @@
MODULE_DESCRIPTION("Fujitsu laptop extras support");
MODULE_VERSION(FUJITSU_DRIVER_VERSION);
MODULE_LICENSE("GPL");
+
+static struct pnp_device_id pnp_ids[] = {
+ { .id = "FUJ02bf" },
+ { .id = "" }
+};
+MODULE_DEVICE_TABLE(pnp, pnp_ids);
diff --git a/drivers/misc/kgdbts.c b/drivers/misc/kgdbts.c
index fa39410..e4ff50b 100644
--- a/drivers/misc/kgdbts.c
+++ b/drivers/misc/kgdbts.c
@@ -102,7 +102,6 @@
#include <linux/nmi.h>
#include <linux/delay.h>
#include <linux/kthread.h>
-#include <linux/delay.h>
#define v1printk(a...) do { \
if (verbose) \
@@ -119,7 +118,6 @@
} while (0)
#define MAX_CONFIG_LEN 40
-static const char hexchars[] = "0123456789abcdef";
static struct kgdb_io kgdbts_io_ops;
static char get_buf[BUFMAX];
static int get_buf_cnt;
@@ -131,6 +129,8 @@
static int test_complete;
static int send_ack;
static int final_ack;
+static int force_hwbrks;
+static int hwbreaks_ok;
static int hw_break_val;
static int hw_break_val2;
#if defined(CONFIG_ARM) || defined(CONFIG_MIPS) || defined(CONFIG_SPARC)
@@ -234,12 +234,12 @@
static void sw_break(char *arg)
{
- break_helper("Z0", arg, 0);
+ break_helper(force_hwbrks ? "Z1" : "Z0", arg, 0);
}
static void sw_rem_break(char *arg)
{
- break_helper("z0", arg, 0);
+ break_helper(force_hwbrks ? "z1" : "z0", arg, 0);
}
static void hw_break(char *arg)
@@ -619,8 +619,8 @@
count++;
}
strcat(get_buf, "#");
- get_buf[count + 2] = hexchars[checksum >> 4];
- get_buf[count + 3] = hexchars[checksum & 0xf];
+ get_buf[count + 2] = hex_asc_hi(checksum);
+ get_buf[count + 3] = hex_asc_lo(checksum);
get_buf[count + 4] = '\0';
v2printk("get%i: %s\n", ts.idx, get_buf);
}
@@ -781,6 +781,8 @@
return;
eprintk("kgdbts: ERROR %s test failed\n", ts.name);
+ if (is_hw_breakpoint)
+ hwbreaks_ok = 0;
}
static void run_hw_break_test(int is_write_test)
@@ -798,9 +800,11 @@
kgdb_breakpoint();
hw_break_val_access();
if (is_write_test) {
- if (test_complete == 2)
+ if (test_complete == 2) {
eprintk("kgdbts: ERROR %s broke on access\n",
ts.name);
+ hwbreaks_ok = 0;
+ }
hw_break_val_write();
}
kgdb_breakpoint();
@@ -809,6 +813,7 @@
return;
eprintk("kgdbts: ERROR %s test failed\n", ts.name);
+ hwbreaks_ok = 0;
}
static void run_nmi_sleep_test(int nmi_sleep)
@@ -912,6 +917,7 @@
/* All HW break point tests */
if (arch_kgdb_ops.flags & KGDB_HW_BREAKPOINT) {
+ hwbreaks_ok = 1;
v1printk("kgdbts:RUN hw breakpoint test\n");
run_breakpoint_test(1);
v1printk("kgdbts:RUN hw write breakpoint test\n");
@@ -925,6 +931,19 @@
run_nmi_sleep_test(nmi_sleep);
}
+#ifdef CONFIG_DEBUG_RODATA
+ /* Until there is an api to write to read-only text segments, use
+ * HW breakpoints for the remainder of any tests, else print a
+ * failure message if hw breakpoints do not work.
+ */
+ if (!(arch_kgdb_ops.flags & KGDB_HW_BREAKPOINT && hwbreaks_ok)) {
+ eprintk("kgdbts: HW breakpoints do not work,"
+ "skipping remaining tests\n");
+ return;
+ }
+ force_hwbrks = 1;
+#endif /* CONFIG_DEBUG_RODATA */
+
/* If the do_fork test is run it will be the last test that is
* executed because a kernel thread will be spawned at the very
* end to unregister the debug hooks.
diff --git a/drivers/misc/sgi-xp/xp.h b/drivers/misc/sgi-xp/xp.h
index 5515234..03a87a3 100644
--- a/drivers/misc/sgi-xp/xp.h
+++ b/drivers/misc/sgi-xp/xp.h
@@ -157,215 +157,136 @@
/*
* Define the return values and values passed to user's callout functions.
* (It is important to add new value codes at the end just preceding
- * xpcUnknownReason, which must have the highest numerical value.)
+ * xpUnknownReason, which must have the highest numerical value.)
*/
-enum xpc_retval {
- xpcSuccess = 0,
+enum xp_retval {
+ xpSuccess = 0,
- xpcNotConnected, /* 1: channel is not connected */
- xpcConnected, /* 2: channel connected (opened) */
- xpcRETIRED1, /* 3: (formerly xpcDisconnected) */
+ xpNotConnected, /* 1: channel is not connected */
+ xpConnected, /* 2: channel connected (opened) */
+ xpRETIRED1, /* 3: (formerly xpDisconnected) */
- xpcMsgReceived, /* 4: message received */
- xpcMsgDelivered, /* 5: message delivered and acknowledged */
+ xpMsgReceived, /* 4: message received */
+ xpMsgDelivered, /* 5: message delivered and acknowledged */
- xpcRETIRED2, /* 6: (formerly xpcTransferFailed) */
+ xpRETIRED2, /* 6: (formerly xpTransferFailed) */
- xpcNoWait, /* 7: operation would require wait */
- xpcRetry, /* 8: retry operation */
- xpcTimeout, /* 9: timeout in xpc_allocate_msg_wait() */
- xpcInterrupted, /* 10: interrupted wait */
+ xpNoWait, /* 7: operation would require wait */
+ xpRetry, /* 8: retry operation */
+ xpTimeout, /* 9: timeout in xpc_allocate_msg_wait() */
+ xpInterrupted, /* 10: interrupted wait */
- xpcUnequalMsgSizes, /* 11: message size disparity between sides */
- xpcInvalidAddress, /* 12: invalid address */
+ xpUnequalMsgSizes, /* 11: message size disparity between sides */
+ xpInvalidAddress, /* 12: invalid address */
- xpcNoMemory, /* 13: no memory available for XPC structures */
- xpcLackOfResources, /* 14: insufficient resources for operation */
- xpcUnregistered, /* 15: channel is not registered */
- xpcAlreadyRegistered, /* 16: channel is already registered */
+ xpNoMemory, /* 13: no memory available for XPC structures */
+ xpLackOfResources, /* 14: insufficient resources for operation */
+ xpUnregistered, /* 15: channel is not registered */
+ xpAlreadyRegistered, /* 16: channel is already registered */
- xpcPartitionDown, /* 17: remote partition is down */
- xpcNotLoaded, /* 18: XPC module is not loaded */
- xpcUnloading, /* 19: this side is unloading XPC module */
+ xpPartitionDown, /* 17: remote partition is down */
+ xpNotLoaded, /* 18: XPC module is not loaded */
+ xpUnloading, /* 19: this side is unloading XPC module */
- xpcBadMagic, /* 20: XPC MAGIC string not found */
+ xpBadMagic, /* 20: XPC MAGIC string not found */
- xpcReactivating, /* 21: remote partition was reactivated */
+ xpReactivating, /* 21: remote partition was reactivated */
- xpcUnregistering, /* 22: this side is unregistering channel */
- xpcOtherUnregistering, /* 23: other side is unregistering channel */
+ xpUnregistering, /* 22: this side is unregistering channel */
+ xpOtherUnregistering, /* 23: other side is unregistering channel */
- xpcCloneKThread, /* 24: cloning kernel thread */
- xpcCloneKThreadFailed, /* 25: cloning kernel thread failed */
+ xpCloneKThread, /* 24: cloning kernel thread */
+ xpCloneKThreadFailed, /* 25: cloning kernel thread failed */
- xpcNoHeartbeat, /* 26: remote partition has no heartbeat */
+ xpNoHeartbeat, /* 26: remote partition has no heartbeat */
- xpcPioReadError, /* 27: PIO read error */
- xpcPhysAddrRegFailed, /* 28: registration of phys addr range failed */
+ xpPioReadError, /* 27: PIO read error */
+ xpPhysAddrRegFailed, /* 28: registration of phys addr range failed */
- xpcBteDirectoryError, /* 29: maps to BTEFAIL_DIR */
- xpcBtePoisonError, /* 30: maps to BTEFAIL_POISON */
- xpcBteWriteError, /* 31: maps to BTEFAIL_WERR */
- xpcBteAccessError, /* 32: maps to BTEFAIL_ACCESS */
- xpcBtePWriteError, /* 33: maps to BTEFAIL_PWERR */
- xpcBtePReadError, /* 34: maps to BTEFAIL_PRERR */
- xpcBteTimeOutError, /* 35: maps to BTEFAIL_TOUT */
- xpcBteXtalkError, /* 36: maps to BTEFAIL_XTERR */
- xpcBteNotAvailable, /* 37: maps to BTEFAIL_NOTAVAIL */
- xpcBteUnmappedError, /* 38: unmapped BTEFAIL_ error */
+ xpRETIRED3, /* 29: (formerly xpBteDirectoryError) */
+ xpRETIRED4, /* 30: (formerly xpBtePoisonError) */
+ xpRETIRED5, /* 31: (formerly xpBteWriteError) */
+ xpRETIRED6, /* 32: (formerly xpBteAccessError) */
+ xpRETIRED7, /* 33: (formerly xpBtePWriteError) */
+ xpRETIRED8, /* 34: (formerly xpBtePReadError) */
+ xpRETIRED9, /* 35: (formerly xpBteTimeOutError) */
+ xpRETIRED10, /* 36: (formerly xpBteXtalkError) */
+ xpRETIRED11, /* 37: (formerly xpBteNotAvailable) */
+ xpRETIRED12, /* 38: (formerly xpBteUnmappedError) */
- xpcBadVersion, /* 39: bad version number */
- xpcVarsNotSet, /* 40: the XPC variables are not set up */
- xpcNoRsvdPageAddr, /* 41: unable to get rsvd page's phys addr */
- xpcInvalidPartid, /* 42: invalid partition ID */
- xpcLocalPartid, /* 43: local partition ID */
+ xpBadVersion, /* 39: bad version number */
+ xpVarsNotSet, /* 40: the XPC variables are not set up */
+ xpNoRsvdPageAddr, /* 41: unable to get rsvd page's phys addr */
+ xpInvalidPartid, /* 42: invalid partition ID */
+ xpLocalPartid, /* 43: local partition ID */
- xpcOtherGoingDown, /* 44: other side going down, reason unknown */
- xpcSystemGoingDown, /* 45: system is going down, reason unknown */
- xpcSystemHalt, /* 46: system is being halted */
- xpcSystemReboot, /* 47: system is being rebooted */
- xpcSystemPoweroff, /* 48: system is being powered off */
+ xpOtherGoingDown, /* 44: other side going down, reason unknown */
+ xpSystemGoingDown, /* 45: system is going down, reason unknown */
+ xpSystemHalt, /* 46: system is being halted */
+ xpSystemReboot, /* 47: system is being rebooted */
+ xpSystemPoweroff, /* 48: system is being powered off */
- xpcDisconnecting, /* 49: channel disconnecting (closing) */
+ xpDisconnecting, /* 49: channel disconnecting (closing) */
- xpcOpenCloseError, /* 50: channel open/close protocol error */
+ xpOpenCloseError, /* 50: channel open/close protocol error */
- xpcDisconnected, /* 51: channel disconnected (closed) */
+ xpDisconnected, /* 51: channel disconnected (closed) */
- xpcBteSh2Start, /* 52: BTE CRB timeout */
+ xpBteCopyError, /* 52: bte_copy() returned error */
- /* 53: 0x1 BTE Error Response Short */
- xpcBteSh2RspShort = xpcBteSh2Start + BTEFAIL_SH2_RESP_SHORT,
-
- /* 54: 0x2 BTE Error Response Long */
- xpcBteSh2RspLong = xpcBteSh2Start + BTEFAIL_SH2_RESP_LONG,
-
- /* 56: 0x4 BTE Error Response DSB */
- xpcBteSh2RspDSB = xpcBteSh2Start + BTEFAIL_SH2_RESP_DSP,
-
- /* 60: 0x8 BTE Error Response Access */
- xpcBteSh2RspAccess = xpcBteSh2Start + BTEFAIL_SH2_RESP_ACCESS,
-
- /* 68: 0x10 BTE Error CRB timeout */
- xpcBteSh2CRBTO = xpcBteSh2Start + BTEFAIL_SH2_CRB_TO,
-
- /* 84: 0x20 BTE Error NACK limit */
- xpcBteSh2NACKLimit = xpcBteSh2Start + BTEFAIL_SH2_NACK_LIMIT,
-
- /* 115: BTE end */
- xpcBteSh2End = xpcBteSh2Start + BTEFAIL_SH2_ALL,
-
- xpcUnknownReason /* 116: unknown reason - must be last in enum */
+ xpUnknownReason /* 53: unknown reason - must be last in enum */
};
/*
- * Define the callout function types used by XPC to update the user on
- * connection activity and state changes (via the user function registered by
- * xpc_connect()) and to notify them of messages received and delivered (via
- * the user function registered by xpc_send_notify()).
- *
- * The two function types are xpc_channel_func and xpc_notify_func and
- * both share the following arguments, with the exception of "data", which
- * only xpc_channel_func has.
+ * Define the callout function type used by XPC to update the user on
+ * connection activity and state changes via the user function registered
+ * by xpc_connect().
*
* Arguments:
*
- * reason - reason code. (See following table.)
+ * reason - reason code.
* partid - partition ID associated with condition.
* ch_number - channel # associated with condition.
- * data - pointer to optional data. (See following table.)
+ * data - pointer to optional data.
* key - pointer to optional user-defined value provided as the "key"
- * argument to xpc_connect() or xpc_send_notify().
+ * argument to xpc_connect().
*
- * In the following table the "Optional Data" column applies to callouts made
- * to functions registered by xpc_connect(). A "NA" in that column indicates
- * that this reason code can be passed to functions registered by
- * xpc_send_notify() (i.e. they don't have data arguments).
+ * A reason code of xpConnected indicates that a connection has been
+ * established to the specified partition on the specified channel. The data
+ * argument indicates the max number of entries allowed in the message queue.
*
- * Also, the first three reason codes in the following table indicate
- * success, whereas the others indicate failure. When a failure reason code
- * is received, one can assume that the channel is not connected.
+ * A reason code of xpMsgReceived indicates that a XPC message arrived from
+ * the specified partition on the specified channel. The data argument
+ * specifies the address of the message's payload. The user must call
+ * xpc_received() when finished with the payload.
*
- *
- * Reason Code | Cause | Optional Data
- * =====================+================================+=====================
- * xpcConnected | connection has been established| max #of entries
- * | to the specified partition on | allowed in message
- * | the specified channel | queue
- * ---------------------+--------------------------------+---------------------
- * xpcMsgReceived | an XPC message arrived from | address of payload
- * | the specified partition on the |
- * | specified channel | [the user must call
- * | | xpc_received() when
- * | | finished with the
- * | | payload]
- * ---------------------+--------------------------------+---------------------
- * xpcMsgDelivered | notification that the message | NA
- * | was delivered to the intended |
- * | recipient and that they have |
- * | acknowledged its receipt by |
- * | calling xpc_received() |
- * =====================+================================+=====================
- * xpcUnequalMsgSizes | can't connect to the specified | NULL
- * | partition on the specified |
- * | channel because of mismatched |
- * | message sizes |
- * ---------------------+--------------------------------+---------------------
- * xpcNoMemory | insufficient memory avaiable | NULL
- * | to allocate message queue |
- * ---------------------+--------------------------------+---------------------
- * xpcLackOfResources | lack of resources to create | NULL
- * | the necessary kthreads to |
- * | support the channel |
- * ---------------------+--------------------------------+---------------------
- * xpcUnregistering | this side's user has | NULL or NA
- * | unregistered by calling |
- * | xpc_disconnect() |
- * ---------------------+--------------------------------+---------------------
- * xpcOtherUnregistering| the other side's user has | NULL or NA
- * | unregistered by calling |
- * | xpc_disconnect() |
- * ---------------------+--------------------------------+---------------------
- * xpcNoHeartbeat | the other side's XPC is no | NULL or NA
- * | longer heartbeating |
- * | |
- * ---------------------+--------------------------------+---------------------
- * xpcUnloading | this side's XPC module is | NULL or NA
- * | being unloaded |
- * | |
- * ---------------------+--------------------------------+---------------------
- * xpcOtherUnloading | the other side's XPC module is | NULL or NA
- * | is being unloaded |
- * | |
- * ---------------------+--------------------------------+---------------------
- * xpcPioReadError | xp_nofault_PIOR() returned an | NULL or NA
- * | error while sending an IPI |
- * | |
- * ---------------------+--------------------------------+---------------------
- * xpcInvalidAddress | the address either received or | NULL or NA
- * | sent by the specified partition|
- * | is invalid |
- * ---------------------+--------------------------------+---------------------
- * xpcBteNotAvailable | attempt to pull data from the | NULL or NA
- * xpcBtePoisonError | specified partition over the |
- * xpcBteWriteError | specified channel via a |
- * xpcBteAccessError | bte_copy() failed |
- * xpcBteTimeOutError | |
- * xpcBteXtalkError | |
- * xpcBteDirectoryError | |
- * xpcBteGenericError | |
- * xpcBteUnmappedError | |
- * ---------------------+--------------------------------+---------------------
- * xpcUnknownReason | the specified channel to the | NULL or NA
- * | specified partition was |
- * | unavailable for unknown reasons|
- * =====================+================================+=====================
+ * All other reason codes indicate failure. The data argmument is NULL.
+ * When a failure reason code is received, one can assume that the channel
+ * is not connected.
*/
-
-typedef void (*xpc_channel_func) (enum xpc_retval reason, partid_t partid,
+typedef void (*xpc_channel_func) (enum xp_retval reason, short partid,
int ch_number, void *data, void *key);
-typedef void (*xpc_notify_func) (enum xpc_retval reason, partid_t partid,
+/*
+ * Define the callout function type used by XPC to notify the user of
+ * messages received and delivered via the user function registered by
+ * xpc_send_notify().
+ *
+ * Arguments:
+ *
+ * reason - reason code.
+ * partid - partition ID associated with condition.
+ * ch_number - channel # associated with condition.
+ * key - pointer to optional user-defined value provided as the "key"
+ * argument to xpc_send_notify().
+ *
+ * A reason code of xpMsgDelivered indicates that the message was delivered
+ * to the intended recipient and that they have acknowledged its receipt by
+ * calling xpc_received().
+ *
+ * All other reason codes indicate failure.
+ */
+typedef void (*xpc_notify_func) (enum xp_retval reason, short partid,
int ch_number, void *key);
/*
@@ -401,57 +322,57 @@
struct xpc_interface {
void (*connect) (int);
void (*disconnect) (int);
- enum xpc_retval (*allocate) (partid_t, int, u32, void **);
- enum xpc_retval (*send) (partid_t, int, void *);
- enum xpc_retval (*send_notify) (partid_t, int, void *,
+ enum xp_retval (*allocate) (short, int, u32, void **);
+ enum xp_retval (*send) (short, int, void *);
+ enum xp_retval (*send_notify) (short, int, void *,
xpc_notify_func, void *);
- void (*received) (partid_t, int, void *);
- enum xpc_retval (*partid_to_nasids) (partid_t, void *);
+ void (*received) (short, int, void *);
+ enum xp_retval (*partid_to_nasids) (short, void *);
};
extern struct xpc_interface xpc_interface;
extern void xpc_set_interface(void (*)(int),
void (*)(int),
- enum xpc_retval (*)(partid_t, int, u32, void **),
- enum xpc_retval (*)(partid_t, int, void *),
- enum xpc_retval (*)(partid_t, int, void *,
+ enum xp_retval (*)(short, int, u32, void **),
+ enum xp_retval (*)(short, int, void *),
+ enum xp_retval (*)(short, int, void *,
xpc_notify_func, void *),
- void (*)(partid_t, int, void *),
- enum xpc_retval (*)(partid_t, void *));
+ void (*)(short, int, void *),
+ enum xp_retval (*)(short, void *));
extern void xpc_clear_interface(void);
-extern enum xpc_retval xpc_connect(int, xpc_channel_func, void *, u16,
+extern enum xp_retval xpc_connect(int, xpc_channel_func, void *, u16,
u16, u32, u32);
extern void xpc_disconnect(int);
-static inline enum xpc_retval
-xpc_allocate(partid_t partid, int ch_number, u32 flags, void **payload)
+static inline enum xp_retval
+xpc_allocate(short partid, int ch_number, u32 flags, void **payload)
{
return xpc_interface.allocate(partid, ch_number, flags, payload);
}
-static inline enum xpc_retval
-xpc_send(partid_t partid, int ch_number, void *payload)
+static inline enum xp_retval
+xpc_send(short partid, int ch_number, void *payload)
{
return xpc_interface.send(partid, ch_number, payload);
}
-static inline enum xpc_retval
-xpc_send_notify(partid_t partid, int ch_number, void *payload,
+static inline enum xp_retval
+xpc_send_notify(short partid, int ch_number, void *payload,
xpc_notify_func func, void *key)
{
return xpc_interface.send_notify(partid, ch_number, payload, func, key);
}
static inline void
-xpc_received(partid_t partid, int ch_number, void *payload)
+xpc_received(short partid, int ch_number, void *payload)
{
return xpc_interface.received(partid, ch_number, payload);
}
-static inline enum xpc_retval
-xpc_partid_to_nasids(partid_t partid, void *nasids)
+static inline enum xp_retval
+xpc_partid_to_nasids(short partid, void *nasids)
{
return xpc_interface.partid_to_nasids(partid, nasids);
}
diff --git a/drivers/misc/sgi-xp/xp_main.c b/drivers/misc/sgi-xp/xp_main.c
index 1fbf99b..196480b 100644
--- a/drivers/misc/sgi-xp/xp_main.c
+++ b/drivers/misc/sgi-xp/xp_main.c
@@ -42,21 +42,21 @@
/*
* Initialize the XPC interface to indicate that XPC isn't loaded.
*/
-static enum xpc_retval
+static enum xp_retval
xpc_notloaded(void)
{
- return xpcNotLoaded;
+ return xpNotLoaded;
}
struct xpc_interface xpc_interface = {
(void (*)(int))xpc_notloaded,
(void (*)(int))xpc_notloaded,
- (enum xpc_retval(*)(partid_t, int, u32, void **))xpc_notloaded,
- (enum xpc_retval(*)(partid_t, int, void *))xpc_notloaded,
- (enum xpc_retval(*)(partid_t, int, void *, xpc_notify_func, void *))
+ (enum xp_retval(*)(short, int, u32, void **))xpc_notloaded,
+ (enum xp_retval(*)(short, int, void *))xpc_notloaded,
+ (enum xp_retval(*)(short, int, void *, xpc_notify_func, void *))
xpc_notloaded,
- (void (*)(partid_t, int, void *))xpc_notloaded,
- (enum xpc_retval(*)(partid_t, void *))xpc_notloaded
+ (void (*)(short, int, void *))xpc_notloaded,
+ (enum xp_retval(*)(short, void *))xpc_notloaded
};
EXPORT_SYMBOL_GPL(xpc_interface);
@@ -66,12 +66,12 @@
void
xpc_set_interface(void (*connect) (int),
void (*disconnect) (int),
- enum xpc_retval (*allocate) (partid_t, int, u32, void **),
- enum xpc_retval (*send) (partid_t, int, void *),
- enum xpc_retval (*send_notify) (partid_t, int, void *,
+ enum xp_retval (*allocate) (short, int, u32, void **),
+ enum xp_retval (*send) (short, int, void *),
+ enum xp_retval (*send_notify) (short, int, void *,
xpc_notify_func, void *),
- void (*received) (partid_t, int, void *),
- enum xpc_retval (*partid_to_nasids) (partid_t, void *))
+ void (*received) (short, int, void *),
+ enum xp_retval (*partid_to_nasids) (short, void *))
{
xpc_interface.connect = connect;
xpc_interface.disconnect = disconnect;
@@ -91,16 +91,16 @@
{
xpc_interface.connect = (void (*)(int))xpc_notloaded;
xpc_interface.disconnect = (void (*)(int))xpc_notloaded;
- xpc_interface.allocate = (enum xpc_retval(*)(partid_t, int, u32,
+ xpc_interface.allocate = (enum xp_retval(*)(short, int, u32,
void **))xpc_notloaded;
- xpc_interface.send = (enum xpc_retval(*)(partid_t, int, void *))
+ xpc_interface.send = (enum xp_retval(*)(short, int, void *))
xpc_notloaded;
- xpc_interface.send_notify = (enum xpc_retval(*)(partid_t, int, void *,
+ xpc_interface.send_notify = (enum xp_retval(*)(short, int, void *,
xpc_notify_func,
void *))xpc_notloaded;
- xpc_interface.received = (void (*)(partid_t, int, void *))
+ xpc_interface.received = (void (*)(short, int, void *))
xpc_notloaded;
- xpc_interface.partid_to_nasids = (enum xpc_retval(*)(partid_t, void *))
+ xpc_interface.partid_to_nasids = (enum xp_retval(*)(short, void *))
xpc_notloaded;
}
EXPORT_SYMBOL_GPL(xpc_clear_interface);
@@ -123,13 +123,13 @@
* nentries - max #of XPC message entries a message queue can contain.
* The actual number, which is determined when a connection
* is established and may be less then requested, will be
- * passed to the user via the xpcConnected callout.
+ * passed to the user via the xpConnected callout.
* assigned_limit - max number of kthreads allowed to be processing
* messages (per connection) at any given instant.
* idle_limit - max number of kthreads allowed to be idle at any given
* instant.
*/
-enum xpc_retval
+enum xp_retval
xpc_connect(int ch_number, xpc_channel_func func, void *key, u16 payload_size,
u16 nentries, u32 assigned_limit, u32 idle_limit)
{
@@ -143,12 +143,12 @@
registration = &xpc_registrations[ch_number];
if (mutex_lock_interruptible(®istration->mutex) != 0)
- return xpcInterrupted;
+ return xpInterrupted;
/* if XPC_CHANNEL_REGISTERED(ch_number) */
if (registration->func != NULL) {
mutex_unlock(®istration->mutex);
- return xpcAlreadyRegistered;
+ return xpAlreadyRegistered;
}
/* register the channel for connection */
@@ -163,7 +163,7 @@
xpc_interface.connect(ch_number);
- return xpcSuccess;
+ return xpSuccess;
}
EXPORT_SYMBOL_GPL(xpc_connect);
diff --git a/drivers/misc/sgi-xp/xpc.h b/drivers/misc/sgi-xp/xpc.h
index 9eb6d4a..11ac267 100644
--- a/drivers/misc/sgi-xp/xpc.h
+++ b/drivers/misc/sgi-xp/xpc.h
@@ -172,13 +172,13 @@
(_version >= _XPC_VERSION(3, 1))
static inline int
-xpc_hb_allowed(partid_t partid, struct xpc_vars *vars)
+xpc_hb_allowed(short partid, struct xpc_vars *vars)
{
return ((vars->heartbeating_to_mask & (1UL << partid)) != 0);
}
static inline void
-xpc_allow_hb(partid_t partid, struct xpc_vars *vars)
+xpc_allow_hb(short partid, struct xpc_vars *vars)
{
u64 old_mask, new_mask;
@@ -190,7 +190,7 @@
}
static inline void
-xpc_disallow_hb(partid_t partid, struct xpc_vars *vars)
+xpc_disallow_hb(short partid, struct xpc_vars *vars)
{
u64 old_mask, new_mask;
@@ -408,11 +408,11 @@
* messages.
*/
struct xpc_channel {
- partid_t partid; /* ID of remote partition connected */
+ short partid; /* ID of remote partition connected */
spinlock_t lock; /* lock for updating this structure */
u32 flags; /* general flags */
- enum xpc_retval reason; /* reason why channel is disconnect'g */
+ enum xp_retval reason; /* reason why channel is disconnect'g */
int reason_line; /* line# disconnect initiated from */
u16 number; /* channel # */
@@ -522,7 +522,7 @@
spinlock_t act_lock; /* protect updating of act_state */
u8 act_state; /* from XPC HB viewpoint */
u8 remote_vars_version; /* version# of partition's vars */
- enum xpc_retval reason; /* reason partition is deactivating */
+ enum xp_retval reason; /* reason partition is deactivating */
int reason_line; /* line# deactivation initiated from */
int reactivate_nasid; /* nasid in partition to reactivate */
@@ -615,7 +615,7 @@
/* interval in seconds to print 'waiting disengagement' messages */
#define XPC_DISENGAGE_PRINTMSG_INTERVAL 10
-#define XPC_PARTID(_p) ((partid_t) ((_p) - &xpc_partitions[0]))
+#define XPC_PARTID(_p) ((short)((_p) - &xpc_partitions[0]))
/* found in xp_main.c */
extern struct xpc_registration xpc_registrations[];
@@ -646,31 +646,31 @@
extern void xpc_restrict_IPI_ops(void);
extern int xpc_identify_act_IRQ_sender(void);
extern int xpc_partition_disengaged(struct xpc_partition *);
-extern enum xpc_retval xpc_mark_partition_active(struct xpc_partition *);
+extern enum xp_retval xpc_mark_partition_active(struct xpc_partition *);
extern void xpc_mark_partition_inactive(struct xpc_partition *);
extern void xpc_discovery(void);
extern void xpc_check_remote_hb(void);
extern void xpc_deactivate_partition(const int, struct xpc_partition *,
- enum xpc_retval);
-extern enum xpc_retval xpc_initiate_partid_to_nasids(partid_t, void *);
+ enum xp_retval);
+extern enum xp_retval xpc_initiate_partid_to_nasids(short, void *);
/* found in xpc_channel.c */
extern void xpc_initiate_connect(int);
extern void xpc_initiate_disconnect(int);
-extern enum xpc_retval xpc_initiate_allocate(partid_t, int, u32, void **);
-extern enum xpc_retval xpc_initiate_send(partid_t, int, void *);
-extern enum xpc_retval xpc_initiate_send_notify(partid_t, int, void *,
- xpc_notify_func, void *);
-extern void xpc_initiate_received(partid_t, int, void *);
-extern enum xpc_retval xpc_setup_infrastructure(struct xpc_partition *);
-extern enum xpc_retval xpc_pull_remote_vars_part(struct xpc_partition *);
+extern enum xp_retval xpc_initiate_allocate(short, int, u32, void **);
+extern enum xp_retval xpc_initiate_send(short, int, void *);
+extern enum xp_retval xpc_initiate_send_notify(short, int, void *,
+ xpc_notify_func, void *);
+extern void xpc_initiate_received(short, int, void *);
+extern enum xp_retval xpc_setup_infrastructure(struct xpc_partition *);
+extern enum xp_retval xpc_pull_remote_vars_part(struct xpc_partition *);
extern void xpc_process_channel_activity(struct xpc_partition *);
extern void xpc_connected_callout(struct xpc_channel *);
extern void xpc_deliver_msg(struct xpc_channel *);
extern void xpc_disconnect_channel(const int, struct xpc_channel *,
- enum xpc_retval, unsigned long *);
-extern void xpc_disconnect_callout(struct xpc_channel *, enum xpc_retval);
-extern void xpc_partition_going_down(struct xpc_partition *, enum xpc_retval);
+ enum xp_retval, unsigned long *);
+extern void xpc_disconnect_callout(struct xpc_channel *, enum xp_retval);
+extern void xpc_partition_going_down(struct xpc_partition *, enum xp_retval);
extern void xpc_teardown_infrastructure(struct xpc_partition *);
static inline void
@@ -901,7 +901,7 @@
return FETCHOP_LOAD_OP(TO_AMO((u64)&amo->variable), FETCHOP_CLEAR);
}
-static inline enum xpc_retval
+static inline enum xp_retval
xpc_IPI_send(AMO_t *amo, u64 flag, int nasid, int phys_cpuid, int vector)
{
int ret = 0;
@@ -923,7 +923,7 @@
local_irq_restore(irq_flags);
- return ((ret == 0) ? xpcSuccess : xpcPioReadError);
+ return ((ret == 0) ? xpSuccess : xpPioReadError);
}
/*
@@ -992,7 +992,7 @@
unsigned long *irq_flags)
{
struct xpc_partition *part = &xpc_partitions[ch->partid];
- enum xpc_retval ret;
+ enum xp_retval ret;
if (likely(part->act_state != XPC_P_DEACTIVATING)) {
ret = xpc_IPI_send(part->remote_IPI_amo_va,
@@ -1001,7 +1001,7 @@
part->remote_IPI_phys_cpuid, SGI_XPC_NOTIFY);
dev_dbg(xpc_chan, "%s sent to partid=%d, channel=%d, ret=%d\n",
ipi_flag_string, ch->partid, ch->number, ret);
- if (unlikely(ret != xpcSuccess)) {
+ if (unlikely(ret != xpSuccess)) {
if (irq_flags != NULL)
spin_unlock_irqrestore(&ch->lock, *irq_flags);
XPC_DEACTIVATE_PARTITION(part, ret);
@@ -1123,41 +1123,10 @@
return amo;
}
-static inline enum xpc_retval
+static inline enum xp_retval
xpc_map_bte_errors(bte_result_t error)
{
- if (error == BTE_SUCCESS)
- return xpcSuccess;
-
- if (is_shub2()) {
- if (BTE_VALID_SH2_ERROR(error))
- return xpcBteSh2Start + error;
- return xpcBteUnmappedError;
- }
- switch (error) {
- case BTE_SUCCESS:
- return xpcSuccess;
- case BTEFAIL_DIR:
- return xpcBteDirectoryError;
- case BTEFAIL_POISON:
- return xpcBtePoisonError;
- case BTEFAIL_WERR:
- return xpcBteWriteError;
- case BTEFAIL_ACCESS:
- return xpcBteAccessError;
- case BTEFAIL_PWERR:
- return xpcBtePWriteError;
- case BTEFAIL_PRERR:
- return xpcBtePReadError;
- case BTEFAIL_TOUT:
- return xpcBteTimeOutError;
- case BTEFAIL_XTERR:
- return xpcBteXtalkError;
- case BTEFAIL_NOTAVAIL:
- return xpcBteNotAvailable;
- default:
- return xpcBteUnmappedError;
- }
+ return ((error == BTE_SUCCESS) ? xpSuccess : xpBteCopyError);
}
/*
diff --git a/drivers/misc/sgi-xp/xpc_channel.c b/drivers/misc/sgi-xp/xpc_channel.c
index bfcb9ea..9c90c2d 100644
--- a/drivers/misc/sgi-xp/xpc_channel.c
+++ b/drivers/misc/sgi-xp/xpc_channel.c
@@ -53,7 +53,7 @@
* Set up the initial values for the XPartition Communication channels.
*/
static void
-xpc_initialize_channels(struct xpc_partition *part, partid_t partid)
+xpc_initialize_channels(struct xpc_partition *part, short partid)
{
int ch_number;
struct xpc_channel *ch;
@@ -90,12 +90,12 @@
* Setup the infrastructure necessary to support XPartition Communication
* between the specified remote partition and the local one.
*/
-enum xpc_retval
+enum xp_retval
xpc_setup_infrastructure(struct xpc_partition *part)
{
int ret, cpuid;
struct timer_list *timer;
- partid_t partid = XPC_PARTID(part);
+ short partid = XPC_PARTID(part);
/*
* Zero out MOST of the entry for this partition. Only the fields
@@ -114,7 +114,7 @@
GFP_KERNEL);
if (part->channels == NULL) {
dev_err(xpc_chan, "can't get memory for channels\n");
- return xpcNoMemory;
+ return xpNoMemory;
}
part->nchannels = XPC_NCHANNELS;
@@ -129,7 +129,7 @@
part->channels = NULL;
dev_err(xpc_chan, "can't get memory for local get/put "
"values\n");
- return xpcNoMemory;
+ return xpNoMemory;
}
part->remote_GPs = xpc_kzalloc_cacheline_aligned(XPC_GP_SIZE,
@@ -143,7 +143,7 @@
part->local_GPs = NULL;
kfree(part->channels);
part->channels = NULL;
- return xpcNoMemory;
+ return xpNoMemory;
}
/* allocate all the required open and close args */
@@ -159,7 +159,7 @@
part->local_GPs = NULL;
kfree(part->channels);
part->channels = NULL;
- return xpcNoMemory;
+ return xpNoMemory;
}
part->remote_openclose_args =
@@ -175,7 +175,7 @@
part->local_GPs = NULL;
kfree(part->channels);
part->channels = NULL;
- return xpcNoMemory;
+ return xpNoMemory;
}
xpc_initialize_channels(part, partid);
@@ -209,7 +209,7 @@
part->local_GPs = NULL;
kfree(part->channels);
part->channels = NULL;
- return xpcLackOfResources;
+ return xpLackOfResources;
}
/* Setup a timer to check for dropped IPIs */
@@ -243,7 +243,7 @@
xpc_vars_part[partid].nchannels = part->nchannels;
xpc_vars_part[partid].magic = XPC_VP_MAGIC1;
- return xpcSuccess;
+ return xpSuccess;
}
/*
@@ -254,7 +254,7 @@
* dst must be a cacheline aligned virtual address on this partition.
* cnt must be an cacheline sized
*/
-static enum xpc_retval
+static enum xp_retval
xpc_pull_remote_cachelines(struct xpc_partition *part, void *dst,
const void *src, size_t cnt)
{
@@ -270,7 +270,7 @@
bte_ret = xp_bte_copy((u64)src, (u64)dst, (u64)cnt,
(BTE_NORMAL | BTE_WACQUIRE), NULL);
if (bte_ret == BTE_SUCCESS)
- return xpcSuccess;
+ return xpSuccess;
dev_dbg(xpc_chan, "xp_bte_copy() from partition %d failed, ret=%d\n",
XPC_PARTID(part), bte_ret);
@@ -282,7 +282,7 @@
* Pull the remote per partition specific variables from the specified
* partition.
*/
-enum xpc_retval
+enum xp_retval
xpc_pull_remote_vars_part(struct xpc_partition *part)
{
u8 buffer[L1_CACHE_BYTES * 2];
@@ -290,8 +290,8 @@
(struct xpc_vars_part *)L1_CACHE_ALIGN((u64)buffer);
struct xpc_vars_part *pulled_entry;
u64 remote_entry_cacheline_pa, remote_entry_pa;
- partid_t partid = XPC_PARTID(part);
- enum xpc_retval ret;
+ short partid = XPC_PARTID(part);
+ enum xp_retval ret;
/* pull the cacheline that contains the variables we're interested in */
@@ -311,7 +311,7 @@
ret = xpc_pull_remote_cachelines(part, pulled_entry_cacheline,
(void *)remote_entry_cacheline_pa,
L1_CACHE_BYTES);
- if (ret != xpcSuccess) {
+ if (ret != xpSuccess) {
dev_dbg(xpc_chan, "failed to pull XPC vars_part from "
"partition %d, ret=%d\n", partid, ret);
return ret;
@@ -326,11 +326,11 @@
dev_dbg(xpc_chan, "partition %d's XPC vars_part for "
"partition %d has bad magic value (=0x%lx)\n",
partid, sn_partition_id, pulled_entry->magic);
- return xpcBadMagic;
+ return xpBadMagic;
}
/* they've not been initialized yet */
- return xpcRetry;
+ return xpRetry;
}
if (xpc_vars_part[partid].magic == XPC_VP_MAGIC1) {
@@ -344,7 +344,7 @@
dev_err(xpc_chan, "partition %d's XPC vars_part for "
"partition %d are not valid\n", partid,
sn_partition_id);
- return xpcInvalidAddress;
+ return xpInvalidAddress;
}
/* the variables we imported look to be valid */
@@ -366,9 +366,9 @@
}
if (pulled_entry->magic == XPC_VP_MAGIC1)
- return xpcRetry;
+ return xpRetry;
- return xpcSuccess;
+ return xpSuccess;
}
/*
@@ -379,7 +379,7 @@
{
unsigned long irq_flags;
u64 IPI_amo;
- enum xpc_retval ret;
+ enum xp_retval ret;
/*
* See if there are any IPI flags to be handled.
@@ -398,7 +398,7 @@
(void *)part->
remote_openclose_args_pa,
XPC_OPENCLOSE_ARGS_SIZE);
- if (ret != xpcSuccess) {
+ if (ret != xpSuccess) {
XPC_DEACTIVATE_PARTITION(part, ret);
dev_dbg(xpc_chan, "failed to pull openclose args from "
@@ -414,7 +414,7 @@
ret = xpc_pull_remote_cachelines(part, part->remote_GPs,
(void *)part->remote_GPs_pa,
XPC_GP_SIZE);
- if (ret != xpcSuccess) {
+ if (ret != xpSuccess) {
XPC_DEACTIVATE_PARTITION(part, ret);
dev_dbg(xpc_chan, "failed to pull GPs from partition "
@@ -431,7 +431,7 @@
/*
* Allocate the local message queue and the notify queue.
*/
-static enum xpc_retval
+static enum xp_retval
xpc_allocate_local_msgqueue(struct xpc_channel *ch)
{
unsigned long irq_flags;
@@ -464,18 +464,18 @@
ch->local_nentries = nentries;
}
spin_unlock_irqrestore(&ch->lock, irq_flags);
- return xpcSuccess;
+ return xpSuccess;
}
dev_dbg(xpc_chan, "can't get memory for local message queue and notify "
"queue, partid=%d, channel=%d\n", ch->partid, ch->number);
- return xpcNoMemory;
+ return xpNoMemory;
}
/*
* Allocate the cached remote message queue.
*/
-static enum xpc_retval
+static enum xp_retval
xpc_allocate_remote_msgqueue(struct xpc_channel *ch)
{
unsigned long irq_flags;
@@ -502,12 +502,12 @@
ch->remote_nentries = nentries;
}
spin_unlock_irqrestore(&ch->lock, irq_flags);
- return xpcSuccess;
+ return xpSuccess;
}
dev_dbg(xpc_chan, "can't get memory for cached remote message queue, "
"partid=%d, channel=%d\n", ch->partid, ch->number);
- return xpcNoMemory;
+ return xpNoMemory;
}
/*
@@ -515,20 +515,20 @@
*
* Note: Assumes all of the channel sizes are filled in.
*/
-static enum xpc_retval
+static enum xp_retval
xpc_allocate_msgqueues(struct xpc_channel *ch)
{
unsigned long irq_flags;
- enum xpc_retval ret;
+ enum xp_retval ret;
DBUG_ON(ch->flags & XPC_C_SETUP);
ret = xpc_allocate_local_msgqueue(ch);
- if (ret != xpcSuccess)
+ if (ret != xpSuccess)
return ret;
ret = xpc_allocate_remote_msgqueue(ch);
- if (ret != xpcSuccess) {
+ if (ret != xpSuccess) {
kfree(ch->local_msgqueue_base);
ch->local_msgqueue = NULL;
kfree(ch->notify_queue);
@@ -540,7 +540,7 @@
ch->flags |= XPC_C_SETUP;
spin_unlock_irqrestore(&ch->lock, irq_flags);
- return xpcSuccess;
+ return xpSuccess;
}
/*
@@ -552,7 +552,7 @@
static void
xpc_process_connect(struct xpc_channel *ch, unsigned long *irq_flags)
{
- enum xpc_retval ret;
+ enum xp_retval ret;
DBUG_ON(!spin_is_locked(&ch->lock));
@@ -568,7 +568,7 @@
ret = xpc_allocate_msgqueues(ch);
spin_lock_irqsave(&ch->lock, *irq_flags);
- if (ret != xpcSuccess)
+ if (ret != xpSuccess)
XPC_DISCONNECT_CHANNEL(ch, ret, irq_flags);
if (ch->flags & (XPC_C_CONNECTED | XPC_C_DISCONNECTING))
@@ -603,7 +603,7 @@
* Notify those who wanted to be notified upon delivery of their message.
*/
static void
-xpc_notify_senders(struct xpc_channel *ch, enum xpc_retval reason, s64 put)
+xpc_notify_senders(struct xpc_channel *ch, enum xp_retval reason, s64 put)
{
struct xpc_notify *notify;
u8 notify_type;
@@ -748,7 +748,7 @@
if (ch->flags & XPC_C_DISCONNECTINGCALLOUT_MADE) {
spin_unlock_irqrestore(&ch->lock, *irq_flags);
- xpc_disconnect_callout(ch, xpcDisconnected);
+ xpc_disconnect_callout(ch, xpDisconnected);
spin_lock_irqsave(&ch->lock, *irq_flags);
}
@@ -791,7 +791,7 @@
struct xpc_openclose_args *args =
&part->remote_openclose_args[ch_number];
struct xpc_channel *ch = &part->channels[ch_number];
- enum xpc_retval reason;
+ enum xp_retval reason;
spin_lock_irqsave(&ch->lock, irq_flags);
@@ -871,10 +871,10 @@
if (!(ch->flags & XPC_C_DISCONNECTING)) {
reason = args->reason;
- if (reason <= xpcSuccess || reason > xpcUnknownReason)
- reason = xpcUnknownReason;
- else if (reason == xpcUnregistering)
- reason = xpcOtherUnregistering;
+ if (reason <= xpSuccess || reason > xpUnknownReason)
+ reason = xpUnknownReason;
+ else if (reason == xpUnregistering)
+ reason = xpOtherUnregistering;
XPC_DISCONNECT_CHANNEL(ch, reason, &irq_flags);
@@ -961,7 +961,7 @@
if (ch->flags & XPC_C_OPENREQUEST) {
if (args->msg_size != ch->msg_size) {
- XPC_DISCONNECT_CHANNEL(ch, xpcUnequalMsgSizes,
+ XPC_DISCONNECT_CHANNEL(ch, xpUnequalMsgSizes,
&irq_flags);
spin_unlock_irqrestore(&ch->lock, irq_flags);
return;
@@ -991,7 +991,7 @@
return;
}
if (!(ch->flags & XPC_C_OPENREQUEST)) {
- XPC_DISCONNECT_CHANNEL(ch, xpcOpenCloseError,
+ XPC_DISCONNECT_CHANNEL(ch, xpOpenCloseError,
&irq_flags);
spin_unlock_irqrestore(&ch->lock, irq_flags);
return;
@@ -1042,18 +1042,18 @@
/*
* Attempt to establish a channel connection to a remote partition.
*/
-static enum xpc_retval
+static enum xp_retval
xpc_connect_channel(struct xpc_channel *ch)
{
unsigned long irq_flags;
struct xpc_registration *registration = &xpc_registrations[ch->number];
if (mutex_trylock(®istration->mutex) == 0)
- return xpcRetry;
+ return xpRetry;
if (!XPC_CHANNEL_REGISTERED(ch->number)) {
mutex_unlock(®istration->mutex);
- return xpcUnregistered;
+ return xpUnregistered;
}
spin_lock_irqsave(&ch->lock, irq_flags);
@@ -1095,10 +1095,10 @@
* the channel lock as needed.
*/
mutex_unlock(®istration->mutex);
- XPC_DISCONNECT_CHANNEL(ch, xpcUnequalMsgSizes,
+ XPC_DISCONNECT_CHANNEL(ch, xpUnequalMsgSizes,
&irq_flags);
spin_unlock_irqrestore(&ch->lock, irq_flags);
- return xpcUnequalMsgSizes;
+ return xpUnequalMsgSizes;
}
} else {
ch->msg_size = registration->msg_size;
@@ -1120,7 +1120,7 @@
spin_unlock_irqrestore(&ch->lock, irq_flags);
- return xpcSuccess;
+ return xpSuccess;
}
/*
@@ -1203,7 +1203,7 @@
* Notify senders that messages sent have been
* received and delivered by the other side.
*/
- xpc_notify_senders(ch, xpcMsgDelivered,
+ xpc_notify_senders(ch, xpMsgDelivered,
ch->remote_GP.get);
}
@@ -1335,7 +1335,7 @@
* at the same time.
*/
void
-xpc_partition_going_down(struct xpc_partition *part, enum xpc_retval reason)
+xpc_partition_going_down(struct xpc_partition *part, enum xp_retval reason)
{
unsigned long irq_flags;
int ch_number;
@@ -1375,7 +1375,7 @@
void
xpc_teardown_infrastructure(struct xpc_partition *part)
{
- partid_t partid = XPC_PARTID(part);
+ short partid = XPC_PARTID(part);
/*
* We start off by making this partition inaccessible to local
@@ -1428,7 +1428,7 @@
void
xpc_initiate_connect(int ch_number)
{
- partid_t partid;
+ short partid;
struct xpc_partition *part;
struct xpc_channel *ch;
@@ -1456,13 +1456,13 @@
/* let the registerer know that a connection has been established */
if (ch->func != NULL) {
- dev_dbg(xpc_chan, "ch->func() called, reason=xpcConnected, "
+ dev_dbg(xpc_chan, "ch->func() called, reason=xpConnected, "
"partid=%d, channel=%d\n", ch->partid, ch->number);
- ch->func(xpcConnected, ch->partid, ch->number,
+ ch->func(xpConnected, ch->partid, ch->number,
(void *)(u64)ch->local_nentries, ch->key);
- dev_dbg(xpc_chan, "ch->func() returned, reason=xpcConnected, "
+ dev_dbg(xpc_chan, "ch->func() returned, reason=xpConnected, "
"partid=%d, channel=%d\n", ch->partid, ch->number);
}
}
@@ -1484,7 +1484,7 @@
xpc_initiate_disconnect(int ch_number)
{
unsigned long irq_flags;
- partid_t partid;
+ short partid;
struct xpc_partition *part;
struct xpc_channel *ch;
@@ -1503,7 +1503,7 @@
if (!(ch->flags & XPC_C_DISCONNECTED)) {
ch->flags |= XPC_C_WDISCONNECT;
- XPC_DISCONNECT_CHANNEL(ch, xpcUnregistering,
+ XPC_DISCONNECT_CHANNEL(ch, xpUnregistering,
&irq_flags);
}
@@ -1528,7 +1528,7 @@
*/
void
xpc_disconnect_channel(const int line, struct xpc_channel *ch,
- enum xpc_retval reason, unsigned long *irq_flags)
+ enum xp_retval reason, unsigned long *irq_flags)
{
u32 channel_was_connected = (ch->flags & XPC_C_CONNECTED);
@@ -1563,7 +1563,7 @@
} else if ((ch->flags & XPC_C_CONNECTEDCALLOUT_MADE) &&
!(ch->flags & XPC_C_DISCONNECTINGCALLOUT)) {
- /* start a kthread that will do the xpcDisconnecting callout */
+ /* start a kthread that will do the xpDisconnecting callout */
xpc_create_kthreads(ch, 1, 1);
}
@@ -1575,7 +1575,7 @@
}
void
-xpc_disconnect_callout(struct xpc_channel *ch, enum xpc_retval reason)
+xpc_disconnect_callout(struct xpc_channel *ch, enum xp_retval reason)
{
/*
* Let the channel's registerer know that the channel is being
@@ -1598,13 +1598,13 @@
* Wait for a message entry to become available for the specified channel,
* but don't wait any longer than 1 jiffy.
*/
-static enum xpc_retval
+static enum xp_retval
xpc_allocate_msg_wait(struct xpc_channel *ch)
{
- enum xpc_retval ret;
+ enum xp_retval ret;
if (ch->flags & XPC_C_DISCONNECTING) {
- DBUG_ON(ch->reason == xpcInterrupted);
+ DBUG_ON(ch->reason == xpInterrupted);
return ch->reason;
}
@@ -1614,11 +1614,11 @@
if (ch->flags & XPC_C_DISCONNECTING) {
ret = ch->reason;
- DBUG_ON(ch->reason == xpcInterrupted);
+ DBUG_ON(ch->reason == xpInterrupted);
} else if (ret == 0) {
- ret = xpcTimeout;
+ ret = xpTimeout;
} else {
- ret = xpcInterrupted;
+ ret = xpInterrupted;
}
return ret;
@@ -1628,12 +1628,12 @@
* Allocate an entry for a message from the message queue associated with the
* specified channel.
*/
-static enum xpc_retval
+static enum xp_retval
xpc_allocate_msg(struct xpc_channel *ch, u32 flags,
struct xpc_msg **address_of_msg)
{
struct xpc_msg *msg;
- enum xpc_retval ret;
+ enum xp_retval ret;
s64 put;
/* this reference will be dropped in xpc_send_msg() */
@@ -1645,7 +1645,7 @@
}
if (!(ch->flags & XPC_C_CONNECTED)) {
xpc_msgqueue_deref(ch);
- return xpcNotConnected;
+ return xpNotConnected;
}
/*
@@ -1653,7 +1653,7 @@
* If none are available, we'll make sure that we grab the latest
* GP values.
*/
- ret = xpcTimeout;
+ ret = xpTimeout;
while (1) {
@@ -1683,16 +1683,16 @@
* that will cause the IPI handler to fetch the latest
* GP values as if an IPI was sent by the other side.
*/
- if (ret == xpcTimeout)
+ if (ret == xpTimeout)
xpc_IPI_send_local_msgrequest(ch);
if (flags & XPC_NOWAIT) {
xpc_msgqueue_deref(ch);
- return xpcNoWait;
+ return xpNoWait;
}
ret = xpc_allocate_msg_wait(ch);
- if (ret != xpcInterrupted && ret != xpcTimeout) {
+ if (ret != xpInterrupted && ret != xpTimeout) {
xpc_msgqueue_deref(ch);
return ret;
}
@@ -1711,7 +1711,7 @@
*address_of_msg = msg;
- return xpcSuccess;
+ return xpSuccess;
}
/*
@@ -1727,11 +1727,11 @@
* payload - address of the allocated payload area pointer (filled in on
* return) in which the user-defined message is constructed.
*/
-enum xpc_retval
-xpc_initiate_allocate(partid_t partid, int ch_number, u32 flags, void **payload)
+enum xp_retval
+xpc_initiate_allocate(short partid, int ch_number, u32 flags, void **payload)
{
struct xpc_partition *part = &xpc_partitions[partid];
- enum xpc_retval ret = xpcUnknownReason;
+ enum xp_retval ret = xpUnknownReason;
struct xpc_msg *msg = NULL;
DBUG_ON(partid <= 0 || partid >= XP_MAX_PARTITIONS);
@@ -1814,11 +1814,11 @@
* local message queue's Put value and sends an IPI to the partition the
* message is being sent to.
*/
-static enum xpc_retval
+static enum xp_retval
xpc_send_msg(struct xpc_channel *ch, struct xpc_msg *msg, u8 notify_type,
xpc_notify_func func, void *key)
{
- enum xpc_retval ret = xpcSuccess;
+ enum xp_retval ret = xpSuccess;
struct xpc_notify *notify = notify;
s64 put, msg_number = msg->number;
@@ -1908,12 +1908,12 @@
* payload - pointer to the payload area allocated via
* xpc_initiate_allocate().
*/
-enum xpc_retval
-xpc_initiate_send(partid_t partid, int ch_number, void *payload)
+enum xp_retval
+xpc_initiate_send(short partid, int ch_number, void *payload)
{
struct xpc_partition *part = &xpc_partitions[partid];
struct xpc_msg *msg = XPC_MSG_ADDRESS(payload);
- enum xpc_retval ret;
+ enum xp_retval ret;
dev_dbg(xpc_chan, "msg=0x%p, partid=%d, channel=%d\n", (void *)msg,
partid, ch_number);
@@ -1957,13 +1957,13 @@
* receipt. THIS FUNCTION MUST BE NON-BLOCKING.
* key - user-defined key to be passed to the function when it's called.
*/
-enum xpc_retval
-xpc_initiate_send_notify(partid_t partid, int ch_number, void *payload,
+enum xp_retval
+xpc_initiate_send_notify(short partid, int ch_number, void *payload,
xpc_notify_func func, void *key)
{
struct xpc_partition *part = &xpc_partitions[partid];
struct xpc_msg *msg = XPC_MSG_ADDRESS(payload);
- enum xpc_retval ret;
+ enum xp_retval ret;
dev_dbg(xpc_chan, "msg=0x%p, partid=%d, channel=%d\n", (void *)msg,
partid, ch_number);
@@ -1985,7 +1985,7 @@
struct xpc_msg *remote_msg, *msg;
u32 msg_index, nmsgs;
u64 msg_offset;
- enum xpc_retval ret;
+ enum xp_retval ret;
if (mutex_lock_interruptible(&ch->msg_to_pull_mutex) != 0) {
/* we were interrupted by a signal */
@@ -2012,7 +2012,7 @@
ret = xpc_pull_remote_cachelines(part, msg, remote_msg,
nmsgs * ch->msg_size);
- if (ret != xpcSuccess) {
+ if (ret != xpSuccess) {
dev_dbg(xpc_chan, "failed to pull %d msgs starting with"
" msg %ld from partition %d, channel=%d, "
@@ -2112,7 +2112,7 @@
ch->number);
/* deliver the message to its intended recipient */
- ch->func(xpcMsgReceived, ch->partid, ch->number,
+ ch->func(xpMsgReceived, ch->partid, ch->number,
&msg->payload, ch->key);
dev_dbg(xpc_chan, "ch->func() returned, msg=0x%p, "
@@ -2203,7 +2203,7 @@
* xpc_initiate_allocate().
*/
void
-xpc_initiate_received(partid_t partid, int ch_number, void *payload)
+xpc_initiate_received(short partid, int ch_number, void *payload)
{
struct xpc_partition *part = &xpc_partitions[partid];
struct xpc_channel *ch;
diff --git a/drivers/misc/sgi-xp/xpc_main.c b/drivers/misc/sgi-xp/xpc_main.c
index f673ba9..08256ed 100644
--- a/drivers/misc/sgi-xp/xpc_main.c
+++ b/drivers/misc/sgi-xp/xpc_main.c
@@ -315,13 +315,13 @@
* the XPC per partition variables from the remote partition and waiting for
* the remote partition to pull ours.
*/
-static enum xpc_retval
+static enum xp_retval
xpc_make_first_contact(struct xpc_partition *part)
{
- enum xpc_retval ret;
+ enum xp_retval ret;
- while ((ret = xpc_pull_remote_vars_part(part)) != xpcSuccess) {
- if (ret != xpcRetry) {
+ while ((ret = xpc_pull_remote_vars_part(part)) != xpSuccess) {
+ if (ret != xpRetry) {
XPC_DEACTIVATE_PARTITION(part, ret);
return ret;
}
@@ -406,7 +406,7 @@
dev_dbg(xpc_chan, "activating partition %d\n", XPC_PARTID(part));
- if (xpc_setup_infrastructure(part) != xpcSuccess)
+ if (xpc_setup_infrastructure(part) != xpSuccess)
return;
/*
@@ -418,7 +418,7 @@
(void)xpc_part_ref(part); /* this will always succeed */
- if (xpc_make_first_contact(part) == xpcSuccess)
+ if (xpc_make_first_contact(part) == xpSuccess)
xpc_channel_mgr(part);
xpc_part_deref(part);
@@ -429,7 +429,7 @@
static int
xpc_activating(void *__partid)
{
- partid_t partid = (u64)__partid;
+ short partid = (u64)__partid;
struct xpc_partition *part = &xpc_partitions[partid];
unsigned long irq_flags;
@@ -470,7 +470,7 @@
spin_lock_irqsave(&part->act_lock, irq_flags);
part->act_state = XPC_P_INACTIVE;
- XPC_SET_REASON(part, xpcPhysAddrRegFailed, __LINE__);
+ XPC_SET_REASON(part, xpPhysAddrRegFailed, __LINE__);
spin_unlock_irqrestore(&part->act_lock, irq_flags);
part->remote_rp_pa = 0;
return 0;
@@ -488,7 +488,7 @@
xpc_disallow_hb(partid, xpc_vars);
xpc_mark_partition_inactive(part);
- if (part->reason == xpcReactivating) {
+ if (part->reason == xpReactivating) {
/* interrupting ourselves results in activating partition */
xpc_IPI_send_reactivate(part);
}
@@ -499,7 +499,7 @@
void
xpc_activate_partition(struct xpc_partition *part)
{
- partid_t partid = XPC_PARTID(part);
+ short partid = XPC_PARTID(part);
unsigned long irq_flags;
struct task_struct *kthread;
@@ -508,7 +508,7 @@
DBUG_ON(part->act_state != XPC_P_INACTIVE);
part->act_state = XPC_P_ACTIVATION_REQ;
- XPC_SET_REASON(part, xpcCloneKThread, __LINE__);
+ XPC_SET_REASON(part, xpCloneKThread, __LINE__);
spin_unlock_irqrestore(&part->act_lock, irq_flags);
@@ -517,7 +517,7 @@
if (IS_ERR(kthread)) {
spin_lock_irqsave(&part->act_lock, irq_flags);
part->act_state = XPC_P_INACTIVE;
- XPC_SET_REASON(part, xpcCloneKThreadFailed, __LINE__);
+ XPC_SET_REASON(part, xpCloneKThreadFailed, __LINE__);
spin_unlock_irqrestore(&part->act_lock, irq_flags);
}
}
@@ -541,7 +541,7 @@
irqreturn_t
xpc_notify_IRQ_handler(int irq, void *dev_id)
{
- partid_t partid = (partid_t) (u64)dev_id;
+ short partid = (short)(u64)dev_id;
struct xpc_partition *part = &xpc_partitions[partid];
DBUG_ON(partid <= 0 || partid >= XP_MAX_PARTITIONS);
@@ -643,7 +643,7 @@
static int
xpc_kthread_start(void *args)
{
- partid_t partid = XPC_UNPACK_ARG1(args);
+ short partid = XPC_UNPACK_ARG1(args);
u16 ch_number = XPC_UNPACK_ARG2(args);
struct xpc_partition *part = &xpc_partitions[partid];
struct xpc_channel *ch;
@@ -696,7 +696,7 @@
ch->flags |= XPC_C_DISCONNECTINGCALLOUT;
spin_unlock_irqrestore(&ch->lock, irq_flags);
- xpc_disconnect_callout(ch, xpcDisconnecting);
+ xpc_disconnect_callout(ch, xpDisconnecting);
spin_lock_irqsave(&ch->lock, irq_flags);
ch->flags |= XPC_C_DISCONNECTINGCALLOUT_MADE;
@@ -776,7 +776,7 @@
* then we'll deadlock if all other kthreads assigned
* to this channel are blocked in the channel's
* registerer, because the only thing that will unblock
- * them is the xpcDisconnecting callout that this
+ * them is the xpDisconnecting callout that this
* failed kthread_run() would have made.
*/
@@ -796,7 +796,7 @@
* to function.
*/
spin_lock_irqsave(&ch->lock, irq_flags);
- XPC_DISCONNECT_CHANNEL(ch, xpcLackOfResources,
+ XPC_DISCONNECT_CHANNEL(ch, xpLackOfResources,
&irq_flags);
spin_unlock_irqrestore(&ch->lock, irq_flags);
}
@@ -809,7 +809,7 @@
xpc_disconnect_wait(int ch_number)
{
unsigned long irq_flags;
- partid_t partid;
+ short partid;
struct xpc_partition *part;
struct xpc_channel *ch;
int wakeup_channel_mgr;
@@ -857,9 +857,9 @@
}
static void
-xpc_do_exit(enum xpc_retval reason)
+xpc_do_exit(enum xp_retval reason)
{
- partid_t partid;
+ short partid;
int active_part_count, printed_waiting_msg = 0;
struct xpc_partition *part;
unsigned long printmsg_time, disengage_request_timeout = 0;
@@ -955,7 +955,7 @@
del_timer_sync(&xpc_hb_timer);
DBUG_ON(xpc_vars->heartbeating_to_mask != 0);
- if (reason == xpcUnloading) {
+ if (reason == xpUnloading) {
/* take ourselves off of the reboot_notifier_list */
(void)unregister_reboot_notifier(&xpc_reboot_notifier);
@@ -981,20 +981,20 @@
static int
xpc_system_reboot(struct notifier_block *nb, unsigned long event, void *unused)
{
- enum xpc_retval reason;
+ enum xp_retval reason;
switch (event) {
case SYS_RESTART:
- reason = xpcSystemReboot;
+ reason = xpSystemReboot;
break;
case SYS_HALT:
- reason = xpcSystemHalt;
+ reason = xpSystemHalt;
break;
case SYS_POWER_OFF:
- reason = xpcSystemPoweroff;
+ reason = xpSystemPoweroff;
break;
default:
- reason = xpcSystemGoingDown;
+ reason = xpSystemGoingDown;
}
xpc_do_exit(reason);
@@ -1008,7 +1008,7 @@
xpc_die_disengage(void)
{
struct xpc_partition *part;
- partid_t partid;
+ short partid;
unsigned long engaged;
long time, printmsg_time, disengage_request_timeout;
@@ -1124,7 +1124,7 @@
xpc_init(void)
{
int ret;
- partid_t partid;
+ short partid;
struct xpc_partition *part;
struct task_struct *kthread;
size_t buf_size;
@@ -1279,7 +1279,7 @@
/* mark this new thread as a non-starter */
complete(&xpc_discovery_exited);
- xpc_do_exit(xpcUnloading);
+ xpc_do_exit(xpUnloading);
return -EBUSY;
}
@@ -1297,7 +1297,7 @@
void __exit
xpc_exit(void)
{
- xpc_do_exit(xpcUnloading);
+ xpc_do_exit(xpUnloading);
}
module_exit(xpc_exit);
diff --git a/drivers/misc/sgi-xp/xpc_partition.c b/drivers/misc/sgi-xp/xpc_partition.c
index acd3fd4..7dd4b58 100644
--- a/drivers/misc/sgi-xp/xpc_partition.c
+++ b/drivers/misc/sgi-xp/xpc_partition.c
@@ -403,7 +403,7 @@
{
struct xpc_vars *remote_vars;
struct xpc_partition *part;
- partid_t partid;
+ short partid;
bte_result_t bres;
remote_vars = (struct xpc_vars *)xpc_remote_copy_buffer;
@@ -444,7 +444,7 @@
(remote_vars->heartbeat_offline == 0)) ||
!xpc_hb_allowed(sn_partition_id, remote_vars)) {
- XPC_DEACTIVATE_PARTITION(part, xpcNoHeartbeat);
+ XPC_DEACTIVATE_PARTITION(part, xpNoHeartbeat);
continue;
}
@@ -459,7 +459,7 @@
* is large enough to contain a copy of their reserved page header and
* part_nasids mask.
*/
-static enum xpc_retval
+static enum xp_retval
xpc_get_remote_rp(int nasid, u64 *discovered_nasids,
struct xpc_rsvd_page *remote_rp, u64 *remote_rp_pa)
{
@@ -469,7 +469,7 @@
*remote_rp_pa = xpc_get_rsvd_page_pa(nasid);
if (*remote_rp_pa == 0)
- return xpcNoRsvdPageAddr;
+ return xpNoRsvdPageAddr;
/* pull over the reserved page header and part_nasids mask */
bres = xp_bte_copy(*remote_rp_pa, (u64)remote_rp,
@@ -489,18 +489,18 @@
if (remote_rp->partid < 1 ||
remote_rp->partid > (XP_MAX_PARTITIONS - 1)) {
- return xpcInvalidPartid;
+ return xpInvalidPartid;
}
if (remote_rp->partid == sn_partition_id)
- return xpcLocalPartid;
+ return xpLocalPartid;
if (XPC_VERSION_MAJOR(remote_rp->version) !=
XPC_VERSION_MAJOR(XPC_RP_VERSION)) {
- return xpcBadVersion;
+ return xpBadVersion;
}
- return xpcSuccess;
+ return xpSuccess;
}
/*
@@ -509,13 +509,13 @@
* remote_vars points to a buffer that is cacheline aligned for BTE copies and
* assumed to be of size XPC_RP_VARS_SIZE.
*/
-static enum xpc_retval
+static enum xp_retval
xpc_get_remote_vars(u64 remote_vars_pa, struct xpc_vars *remote_vars)
{
int bres;
if (remote_vars_pa == 0)
- return xpcVarsNotSet;
+ return xpVarsNotSet;
/* pull over the cross partition variables */
bres = xp_bte_copy(remote_vars_pa, (u64)remote_vars, XPC_RP_VARS_SIZE,
@@ -525,10 +525,10 @@
if (XPC_VERSION_MAJOR(remote_vars->version) !=
XPC_VERSION_MAJOR(XPC_V_VERSION)) {
- return xpcBadVersion;
+ return xpBadVersion;
}
- return xpcSuccess;
+ return xpSuccess;
}
/*
@@ -604,16 +604,16 @@
int reactivate = 0;
int stamp_diff;
struct timespec remote_rp_stamp = { 0, 0 };
- partid_t partid;
+ short partid;
struct xpc_partition *part;
- enum xpc_retval ret;
+ enum xp_retval ret;
/* pull over the reserved page structure */
remote_rp = (struct xpc_rsvd_page *)xpc_remote_copy_buffer;
ret = xpc_get_remote_rp(nasid, NULL, remote_rp, &remote_rp_pa);
- if (ret != xpcSuccess) {
+ if (ret != xpSuccess) {
dev_warn(xpc_part, "unable to get reserved page from nasid %d, "
"which sent interrupt, reason=%d\n", nasid, ret);
return;
@@ -632,7 +632,7 @@
remote_vars = (struct xpc_vars *)xpc_remote_copy_buffer;
ret = xpc_get_remote_vars(remote_vars_pa, remote_vars);
- if (ret != xpcSuccess) {
+ if (ret != xpSuccess) {
dev_warn(xpc_part, "unable to get XPC variables from nasid %d, "
"which sent interrupt, reason=%d\n", nasid, ret);
@@ -699,7 +699,7 @@
&remote_rp_stamp, remote_rp_pa,
remote_vars_pa, remote_vars);
part->reactivate_nasid = nasid;
- XPC_DEACTIVATE_PARTITION(part, xpcReactivating);
+ XPC_DEACTIVATE_PARTITION(part, xpReactivating);
return;
}
@@ -754,11 +754,11 @@
if (reactivate) {
part->reactivate_nasid = nasid;
- XPC_DEACTIVATE_PARTITION(part, xpcReactivating);
+ XPC_DEACTIVATE_PARTITION(part, xpReactivating);
} else if (XPC_SUPPORTS_DISENGAGE_REQUEST(part->remote_vars_version) &&
xpc_partition_disengage_requested(1UL << partid)) {
- XPC_DEACTIVATE_PARTITION(part, xpcOtherGoingDown);
+ XPC_DEACTIVATE_PARTITION(part, xpOtherGoingDown);
}
}
@@ -825,7 +825,7 @@
int
xpc_partition_disengaged(struct xpc_partition *part)
{
- partid_t partid = XPC_PARTID(part);
+ short partid = XPC_PARTID(part);
int disengaged;
disengaged = (xpc_partition_engaged(1UL << partid) == 0);
@@ -870,20 +870,20 @@
/*
* Mark specified partition as active.
*/
-enum xpc_retval
+enum xp_retval
xpc_mark_partition_active(struct xpc_partition *part)
{
unsigned long irq_flags;
- enum xpc_retval ret;
+ enum xp_retval ret;
dev_dbg(xpc_part, "setting partition %d to ACTIVE\n", XPC_PARTID(part));
spin_lock_irqsave(&part->act_lock, irq_flags);
if (part->act_state == XPC_P_ACTIVATING) {
part->act_state = XPC_P_ACTIVE;
- ret = xpcSuccess;
+ ret = xpSuccess;
} else {
- DBUG_ON(part->reason == xpcSuccess);
+ DBUG_ON(part->reason == xpSuccess);
ret = part->reason;
}
spin_unlock_irqrestore(&part->act_lock, irq_flags);
@@ -896,7 +896,7 @@
*/
void
xpc_deactivate_partition(const int line, struct xpc_partition *part,
- enum xpc_retval reason)
+ enum xp_retval reason)
{
unsigned long irq_flags;
@@ -905,15 +905,15 @@
if (part->act_state == XPC_P_INACTIVE) {
XPC_SET_REASON(part, reason, line);
spin_unlock_irqrestore(&part->act_lock, irq_flags);
- if (reason == xpcReactivating) {
+ if (reason == xpReactivating) {
/* we interrupt ourselves to reactivate partition */
xpc_IPI_send_reactivate(part);
}
return;
}
if (part->act_state == XPC_P_DEACTIVATING) {
- if ((part->reason == xpcUnloading && reason != xpcUnloading) ||
- reason == xpcReactivating) {
+ if ((part->reason == xpUnloading && reason != xpUnloading) ||
+ reason == xpReactivating) {
XPC_SET_REASON(part, reason, line);
}
spin_unlock_irqrestore(&part->act_lock, irq_flags);
@@ -982,10 +982,10 @@
int max_regions;
int nasid;
struct xpc_rsvd_page *rp;
- partid_t partid;
+ short partid;
struct xpc_partition *part;
u64 *discovered_nasids;
- enum xpc_retval ret;
+ enum xp_retval ret;
remote_rp = xpc_kmalloc_cacheline_aligned(XPC_RP_HEADER_SIZE +
xp_nasid_mask_bytes,
@@ -1063,12 +1063,12 @@
ret = xpc_get_remote_rp(nasid, discovered_nasids,
remote_rp, &remote_rp_pa);
- if (ret != xpcSuccess) {
+ if (ret != xpSuccess) {
dev_dbg(xpc_part, "unable to get reserved page "
"from nasid %d, reason=%d\n", nasid,
ret);
- if (ret == xpcLocalPartid)
+ if (ret == xpLocalPartid)
break;
continue;
@@ -1082,7 +1082,7 @@
/* pull over the cross partition variables */
ret = xpc_get_remote_vars(remote_vars_pa, remote_vars);
- if (ret != xpcSuccess) {
+ if (ret != xpSuccess) {
dev_dbg(xpc_part, "unable to get XPC variables "
"from nasid %d, reason=%d\n", nasid,
ret);
@@ -1116,7 +1116,7 @@
"register xp_addr region 0x%016lx\n",
partid, remote_vars->amos_page_pa);
- XPC_SET_REASON(part, xpcPhysAddrRegFailed,
+ XPC_SET_REASON(part, xpPhysAddrRegFailed,
__LINE__);
break;
}
@@ -1151,8 +1151,8 @@
* Given a partid, get the nasids owned by that partition from the
* remote partition's reserved page.
*/
-enum xpc_retval
-xpc_initiate_partid_to_nasids(partid_t partid, void *nasid_mask)
+enum xp_retval
+xpc_initiate_partid_to_nasids(short partid, void *nasid_mask)
{
struct xpc_partition *part;
u64 part_nasid_pa;
@@ -1160,7 +1160,7 @@
part = &xpc_partitions[partid];
if (part->remote_rp_pa == 0)
- return xpcPartitionDown;
+ return xpPartitionDown;
memset(nasid_mask, 0, XP_NASID_MASK_BYTES);
diff --git a/drivers/misc/sgi-xp/xpnet.c b/drivers/misc/sgi-xp/xpnet.c
index a9543c6..822dc8e 100644
--- a/drivers/misc/sgi-xp/xpnet.c
+++ b/drivers/misc/sgi-xp/xpnet.c
@@ -166,7 +166,7 @@
* Packet was recevied by XPC and forwarded to us.
*/
static void
-xpnet_receive(partid_t partid, int channel, struct xpnet_message *msg)
+xpnet_receive(short partid, int channel, struct xpnet_message *msg)
{
struct sk_buff *skb;
bte_result_t bret;
@@ -282,7 +282,7 @@
* state or message reception on a connection.
*/
static void
-xpnet_connection_activity(enum xpc_retval reason, partid_t partid, int channel,
+xpnet_connection_activity(enum xp_retval reason, short partid, int channel,
void *data, void *key)
{
long bp;
@@ -291,13 +291,13 @@
DBUG_ON(channel != XPC_NET_CHANNEL);
switch (reason) {
- case xpcMsgReceived: /* message received */
+ case xpMsgReceived: /* message received */
DBUG_ON(data == NULL);
xpnet_receive(partid, channel, (struct xpnet_message *)data);
break;
- case xpcConnected: /* connection completed to a partition */
+ case xpConnected: /* connection completed to a partition */
spin_lock_bh(&xpnet_broadcast_lock);
xpnet_broadcast_partitions |= 1UL << (partid - 1);
bp = xpnet_broadcast_partitions;
@@ -330,7 +330,7 @@
static int
xpnet_dev_open(struct net_device *dev)
{
- enum xpc_retval ret;
+ enum xp_retval ret;
dev_dbg(xpnet, "calling xpc_connect(%d, 0x%p, NULL, %ld, %ld, %ld, "
"%ld)\n", XPC_NET_CHANNEL, xpnet_connection_activity,
@@ -340,7 +340,7 @@
ret = xpc_connect(XPC_NET_CHANNEL, xpnet_connection_activity, NULL,
XPNET_MSG_SIZE, XPNET_MSG_NENTRIES,
XPNET_MAX_KTHREADS, XPNET_MAX_IDLE_KTHREADS);
- if (ret != xpcSuccess) {
+ if (ret != xpSuccess) {
dev_err(xpnet, "ifconfig up of %s failed on XPC connect, "
"ret=%d\n", dev->name, ret);
@@ -407,7 +407,7 @@
* release the skb and then release our pending message structure.
*/
static void
-xpnet_send_completed(enum xpc_retval reason, partid_t partid, int channel,
+xpnet_send_completed(enum xp_retval reason, short partid, int channel,
void *__qm)
{
struct xpnet_pending_msg *queued_msg = (struct xpnet_pending_msg *)__qm;
@@ -439,12 +439,12 @@
xpnet_dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct xpnet_pending_msg *queued_msg;
- enum xpc_retval ret;
+ enum xp_retval ret;
struct xpnet_message *msg;
u64 start_addr, end_addr;
long dp;
u8 second_mac_octet;
- partid_t dest_partid;
+ short dest_partid;
struct xpnet_dev_private *priv;
u16 embedded_bytes;
@@ -528,7 +528,7 @@
ret = xpc_allocate(dest_partid, XPC_NET_CHANNEL,
XPC_NOWAIT, (void **)&msg);
- if (unlikely(ret != xpcSuccess))
+ if (unlikely(ret != xpSuccess))
continue;
msg->embedded_bytes = embedded_bytes;
@@ -557,7 +557,7 @@
ret = xpc_send_notify(dest_partid, XPC_NET_CHANNEL, msg,
xpnet_send_completed, queued_msg);
- if (unlikely(ret != xpcSuccess)) {
+ if (unlikely(ret != xpSuccess)) {
atomic_dec(&queued_msg->use_count);
continue;
}
diff --git a/drivers/misc/thinkpad_acpi.c b/drivers/misc/thinkpad_acpi.c
index 3f28f6e..b596929 100644
--- a/drivers/misc/thinkpad_acpi.c
+++ b/drivers/misc/thinkpad_acpi.c
@@ -1293,7 +1293,7 @@
mutex_lock(&tpacpi_inputdev_send_mutex);
input_report_switch(tpacpi_inputdev,
- SW_RADIO, !!wlsw);
+ SW_RFKILL_ALL, !!wlsw);
input_sync(tpacpi_inputdev);
mutex_unlock(&tpacpi_inputdev_send_mutex);
@@ -1921,6 +1921,29 @@
&dev_attr_hotkey_wakeup_hotunplug_complete.attr,
};
+static void hotkey_exit(void)
+{
+#ifdef CONFIG_THINKPAD_ACPI_HOTKEY_POLL
+ hotkey_poll_stop_sync();
+#endif
+
+ if (hotkey_dev_attributes)
+ delete_attr_set(hotkey_dev_attributes, &tpacpi_pdev->dev.kobj);
+
+ kfree(hotkey_keycode_map);
+
+ if (tp_features.hotkey) {
+ dbg_printk(TPACPI_DBG_EXIT,
+ "restoring original hot key mask\n");
+ /* no short-circuit boolean operator below! */
+ if ((hotkey_mask_set(hotkey_orig_mask) |
+ hotkey_status_set(hotkey_orig_status)) != 0)
+ printk(TPACPI_ERR
+ "failed to restore hot key mask "
+ "to BIOS defaults\n");
+ }
+}
+
static int __init hotkey_init(struct ibm_init_struct *iibm)
{
/* Requirements for changing the default keymaps:
@@ -2060,226 +2083,220 @@
vdbg_printk(TPACPI_DBG_INIT, "hotkeys are %s\n",
str_supported(tp_features.hotkey));
- if (tp_features.hotkey) {
- hotkey_dev_attributes = create_attr_set(13, NULL);
- if (!hotkey_dev_attributes)
- return -ENOMEM;
- res = add_many_to_attr_set(hotkey_dev_attributes,
- hotkey_attributes,
- ARRAY_SIZE(hotkey_attributes));
+ if (!tp_features.hotkey)
+ return 1;
+
+ hotkey_dev_attributes = create_attr_set(13, NULL);
+ if (!hotkey_dev_attributes)
+ return -ENOMEM;
+ res = add_many_to_attr_set(hotkey_dev_attributes,
+ hotkey_attributes,
+ ARRAY_SIZE(hotkey_attributes));
+ if (res)
+ goto err_exit;
+
+ /* mask not supported on 570, 600e/x, 770e, 770x, A21e, A2xm/p,
+ A30, R30, R31, T20-22, X20-21, X22-24. Detected by checking
+ for HKEY interface version 0x100 */
+ if (acpi_evalf(hkey_handle, &hkeyv, "MHKV", "qd")) {
+ if ((hkeyv >> 8) != 1) {
+ printk(TPACPI_ERR "unknown version of the "
+ "HKEY interface: 0x%x\n", hkeyv);
+ printk(TPACPI_ERR "please report this to %s\n",
+ TPACPI_MAIL);
+ } else {
+ /*
+ * MHKV 0x100 in A31, R40, R40e,
+ * T4x, X31, and later
+ */
+ tp_features.hotkey_mask = 1;
+ }
+ }
+
+ vdbg_printk(TPACPI_DBG_INIT, "hotkey masks are %s\n",
+ str_supported(tp_features.hotkey_mask));
+
+ if (tp_features.hotkey_mask) {
+ if (!acpi_evalf(hkey_handle, &hotkey_all_mask,
+ "MHKA", "qd")) {
+ printk(TPACPI_ERR
+ "missing MHKA handler, "
+ "please report this to %s\n",
+ TPACPI_MAIL);
+ /* FN+F12, FN+F4, FN+F3 */
+ hotkey_all_mask = 0x080cU;
+ }
+ }
+
+ /* hotkey_source_mask *must* be zero for
+ * the first hotkey_mask_get */
+ res = hotkey_status_get(&hotkey_orig_status);
+ if (res)
+ goto err_exit;
+
+ if (tp_features.hotkey_mask) {
+ res = hotkey_mask_get();
if (res)
- return res;
+ goto err_exit;
- /* mask not supported on 570, 600e/x, 770e, 770x, A21e, A2xm/p,
- A30, R30, R31, T20-22, X20-21, X22-24. Detected by checking
- for HKEY interface version 0x100 */
- if (acpi_evalf(hkey_handle, &hkeyv, "MHKV", "qd")) {
- if ((hkeyv >> 8) != 1) {
- printk(TPACPI_ERR "unknown version of the "
- "HKEY interface: 0x%x\n", hkeyv);
- printk(TPACPI_ERR "please report this to %s\n",
- TPACPI_MAIL);
- } else {
- /*
- * MHKV 0x100 in A31, R40, R40e,
- * T4x, X31, and later
- */
- tp_features.hotkey_mask = 1;
- }
- }
-
- vdbg_printk(TPACPI_DBG_INIT, "hotkey masks are %s\n",
- str_supported(tp_features.hotkey_mask));
-
- if (tp_features.hotkey_mask) {
- if (!acpi_evalf(hkey_handle, &hotkey_all_mask,
- "MHKA", "qd")) {
- printk(TPACPI_ERR
- "missing MHKA handler, "
- "please report this to %s\n",
- TPACPI_MAIL);
- /* FN+F12, FN+F4, FN+F3 */
- hotkey_all_mask = 0x080cU;
- }
- }
-
- /* hotkey_source_mask *must* be zero for
- * the first hotkey_mask_get */
- res = hotkey_status_get(&hotkey_orig_status);
- if (!res && tp_features.hotkey_mask) {
- res = hotkey_mask_get();
- hotkey_orig_mask = hotkey_mask;
- if (!res) {
- res = add_many_to_attr_set(
- hotkey_dev_attributes,
- hotkey_mask_attributes,
- ARRAY_SIZE(hotkey_mask_attributes));
- }
- }
+ hotkey_orig_mask = hotkey_mask;
+ res = add_many_to_attr_set(
+ hotkey_dev_attributes,
+ hotkey_mask_attributes,
+ ARRAY_SIZE(hotkey_mask_attributes));
+ if (res)
+ goto err_exit;
+ }
#ifdef CONFIG_THINKPAD_ACPI_HOTKEY_POLL
- if (tp_features.hotkey_mask) {
- hotkey_source_mask = TPACPI_HKEY_NVRAM_GOOD_MASK
- & ~hotkey_all_mask;
- } else {
- hotkey_source_mask = TPACPI_HKEY_NVRAM_GOOD_MASK;
- }
+ if (tp_features.hotkey_mask) {
+ hotkey_source_mask = TPACPI_HKEY_NVRAM_GOOD_MASK
+ & ~hotkey_all_mask;
+ } else {
+ hotkey_source_mask = TPACPI_HKEY_NVRAM_GOOD_MASK;
+ }
- vdbg_printk(TPACPI_DBG_INIT,
- "hotkey source mask 0x%08x, polling freq %d\n",
- hotkey_source_mask, hotkey_poll_freq);
+ vdbg_printk(TPACPI_DBG_INIT,
+ "hotkey source mask 0x%08x, polling freq %d\n",
+ hotkey_source_mask, hotkey_poll_freq);
#endif
- /* Not all thinkpads have a hardware radio switch */
- if (!res && acpi_evalf(hkey_handle, &status, "WLSW", "qd")) {
- tp_features.hotkey_wlsw = 1;
- printk(TPACPI_INFO
- "radio switch found; radios are %s\n",
- enabled(status, 0));
- res = add_to_attr_set(hotkey_dev_attributes,
- &dev_attr_hotkey_radio_sw.attr);
- }
+ /* Not all thinkpads have a hardware radio switch */
+ if (acpi_evalf(hkey_handle, &status, "WLSW", "qd")) {
+ tp_features.hotkey_wlsw = 1;
+ printk(TPACPI_INFO
+ "radio switch found; radios are %s\n",
+ enabled(status, 0));
+ res = add_to_attr_set(hotkey_dev_attributes,
+ &dev_attr_hotkey_radio_sw.attr);
+ }
- /* For X41t, X60t, X61t Tablets... */
- if (!res && acpi_evalf(hkey_handle, &status, "MHKG", "qd")) {
- tp_features.hotkey_tablet = 1;
- printk(TPACPI_INFO
- "possible tablet mode switch found; "
- "ThinkPad in %s mode\n",
- (status & TP_HOTKEY_TABLET_MASK)?
- "tablet" : "laptop");
- res = add_to_attr_set(hotkey_dev_attributes,
- &dev_attr_hotkey_tablet_mode.attr);
- }
+ /* For X41t, X60t, X61t Tablets... */
+ if (!res && acpi_evalf(hkey_handle, &status, "MHKG", "qd")) {
+ tp_features.hotkey_tablet = 1;
+ printk(TPACPI_INFO
+ "possible tablet mode switch found; "
+ "ThinkPad in %s mode\n",
+ (status & TP_HOTKEY_TABLET_MASK)?
+ "tablet" : "laptop");
+ res = add_to_attr_set(hotkey_dev_attributes,
+ &dev_attr_hotkey_tablet_mode.attr);
+ }
- if (!res)
- res = register_attr_set_with_sysfs(
- hotkey_dev_attributes,
- &tpacpi_pdev->dev.kobj);
- if (res)
- return res;
+ if (!res)
+ res = register_attr_set_with_sysfs(
+ hotkey_dev_attributes,
+ &tpacpi_pdev->dev.kobj);
+ if (res)
+ goto err_exit;
- /* Set up key map */
+ /* Set up key map */
- hotkey_keycode_map = kmalloc(TPACPI_HOTKEY_MAP_SIZE,
- GFP_KERNEL);
- if (!hotkey_keycode_map) {
- printk(TPACPI_ERR
- "failed to allocate memory for key map\n");
- return -ENOMEM;
- }
+ hotkey_keycode_map = kmalloc(TPACPI_HOTKEY_MAP_SIZE,
+ GFP_KERNEL);
+ if (!hotkey_keycode_map) {
+ printk(TPACPI_ERR
+ "failed to allocate memory for key map\n");
+ res = -ENOMEM;
+ goto err_exit;
+ }
- if (thinkpad_id.vendor == PCI_VENDOR_ID_LENOVO) {
- dbg_printk(TPACPI_DBG_INIT,
- "using Lenovo default hot key map\n");
- memcpy(hotkey_keycode_map, &lenovo_keycode_map,
- TPACPI_HOTKEY_MAP_SIZE);
+ if (thinkpad_id.vendor == PCI_VENDOR_ID_LENOVO) {
+ dbg_printk(TPACPI_DBG_INIT,
+ "using Lenovo default hot key map\n");
+ memcpy(hotkey_keycode_map, &lenovo_keycode_map,
+ TPACPI_HOTKEY_MAP_SIZE);
+ } else {
+ dbg_printk(TPACPI_DBG_INIT,
+ "using IBM default hot key map\n");
+ memcpy(hotkey_keycode_map, &ibm_keycode_map,
+ TPACPI_HOTKEY_MAP_SIZE);
+ }
+
+ set_bit(EV_KEY, tpacpi_inputdev->evbit);
+ set_bit(EV_MSC, tpacpi_inputdev->evbit);
+ set_bit(MSC_SCAN, tpacpi_inputdev->mscbit);
+ tpacpi_inputdev->keycodesize = TPACPI_HOTKEY_MAP_TYPESIZE;
+ tpacpi_inputdev->keycodemax = TPACPI_HOTKEY_MAP_LEN;
+ tpacpi_inputdev->keycode = hotkey_keycode_map;
+ for (i = 0; i < TPACPI_HOTKEY_MAP_LEN; i++) {
+ if (hotkey_keycode_map[i] != KEY_RESERVED) {
+ set_bit(hotkey_keycode_map[i],
+ tpacpi_inputdev->keybit);
} else {
- dbg_printk(TPACPI_DBG_INIT,
- "using IBM default hot key map\n");
- memcpy(hotkey_keycode_map, &ibm_keycode_map,
- TPACPI_HOTKEY_MAP_SIZE);
+ if (i < sizeof(hotkey_reserved_mask)*8)
+ hotkey_reserved_mask |= 1 << i;
}
-
- set_bit(EV_KEY, tpacpi_inputdev->evbit);
- set_bit(EV_MSC, tpacpi_inputdev->evbit);
- set_bit(MSC_SCAN, tpacpi_inputdev->mscbit);
- tpacpi_inputdev->keycodesize = TPACPI_HOTKEY_MAP_TYPESIZE;
- tpacpi_inputdev->keycodemax = TPACPI_HOTKEY_MAP_LEN;
- tpacpi_inputdev->keycode = hotkey_keycode_map;
- for (i = 0; i < TPACPI_HOTKEY_MAP_LEN; i++) {
- if (hotkey_keycode_map[i] != KEY_RESERVED) {
- set_bit(hotkey_keycode_map[i],
- tpacpi_inputdev->keybit);
- } else {
- if (i < sizeof(hotkey_reserved_mask)*8)
- hotkey_reserved_mask |= 1 << i;
- }
- }
-
- if (tp_features.hotkey_wlsw) {
- set_bit(EV_SW, tpacpi_inputdev->evbit);
- set_bit(SW_RADIO, tpacpi_inputdev->swbit);
- }
- if (tp_features.hotkey_tablet) {
- set_bit(EV_SW, tpacpi_inputdev->evbit);
- set_bit(SW_TABLET_MODE, tpacpi_inputdev->swbit);
- }
-
- /* Do not issue duplicate brightness change events to
- * userspace */
- if (!tp_features.bright_acpimode)
- /* update bright_acpimode... */
- tpacpi_check_std_acpi_brightness_support();
-
- if (tp_features.bright_acpimode) {
- printk(TPACPI_INFO
- "This ThinkPad has standard ACPI backlight "
- "brightness control, supported by the ACPI "
- "video driver\n");
- printk(TPACPI_NOTICE
- "Disabling thinkpad-acpi brightness events "
- "by default...\n");
-
- /* The hotkey_reserved_mask change below is not
- * necessary while the keys are at KEY_RESERVED in the
- * default map, but better safe than sorry, leave it
- * here as a marker of what we have to do, especially
- * when we finally become able to set this at runtime
- * on response to X.org requests */
- hotkey_reserved_mask |=
- (1 << TP_ACPI_HOTKEYSCAN_FNHOME)
- | (1 << TP_ACPI_HOTKEYSCAN_FNEND);
- }
-
- dbg_printk(TPACPI_DBG_INIT,
- "enabling hot key handling\n");
- res = hotkey_status_set(1);
- if (res)
- return res;
- res = hotkey_mask_set(((hotkey_all_mask | hotkey_source_mask)
- & ~hotkey_reserved_mask)
- | hotkey_orig_mask);
- if (res < 0 && res != -ENXIO)
- return res;
-
- dbg_printk(TPACPI_DBG_INIT,
- "legacy hot key reporting over procfs %s\n",
- (hotkey_report_mode < 2) ?
- "enabled" : "disabled");
-
- tpacpi_inputdev->open = &hotkey_inputdev_open;
- tpacpi_inputdev->close = &hotkey_inputdev_close;
-
- hotkey_poll_setup_safe(1);
- tpacpi_input_send_radiosw();
- tpacpi_input_send_tabletsw();
}
- return (tp_features.hotkey)? 0 : 1;
-}
-
-static void hotkey_exit(void)
-{
-#ifdef CONFIG_THINKPAD_ACPI_HOTKEY_POLL
- hotkey_poll_stop_sync();
-#endif
-
- if (tp_features.hotkey) {
- dbg_printk(TPACPI_DBG_EXIT,
- "restoring original hot key mask\n");
- /* no short-circuit boolean operator below! */
- if ((hotkey_mask_set(hotkey_orig_mask) |
- hotkey_status_set(hotkey_orig_status)) != 0)
- printk(TPACPI_ERR
- "failed to restore hot key mask "
- "to BIOS defaults\n");
+ if (tp_features.hotkey_wlsw) {
+ set_bit(EV_SW, tpacpi_inputdev->evbit);
+ set_bit(SW_RFKILL_ALL, tpacpi_inputdev->swbit);
+ }
+ if (tp_features.hotkey_tablet) {
+ set_bit(EV_SW, tpacpi_inputdev->evbit);
+ set_bit(SW_TABLET_MODE, tpacpi_inputdev->swbit);
}
- if (hotkey_dev_attributes) {
- delete_attr_set(hotkey_dev_attributes, &tpacpi_pdev->dev.kobj);
- hotkey_dev_attributes = NULL;
+ /* Do not issue duplicate brightness change events to
+ * userspace */
+ if (!tp_features.bright_acpimode)
+ /* update bright_acpimode... */
+ tpacpi_check_std_acpi_brightness_support();
+
+ if (tp_features.bright_acpimode) {
+ printk(TPACPI_INFO
+ "This ThinkPad has standard ACPI backlight "
+ "brightness control, supported by the ACPI "
+ "video driver\n");
+ printk(TPACPI_NOTICE
+ "Disabling thinkpad-acpi brightness events "
+ "by default...\n");
+
+ /* The hotkey_reserved_mask change below is not
+ * necessary while the keys are at KEY_RESERVED in the
+ * default map, but better safe than sorry, leave it
+ * here as a marker of what we have to do, especially
+ * when we finally become able to set this at runtime
+ * on response to X.org requests */
+ hotkey_reserved_mask |=
+ (1 << TP_ACPI_HOTKEYSCAN_FNHOME)
+ | (1 << TP_ACPI_HOTKEYSCAN_FNEND);
}
+
+ dbg_printk(TPACPI_DBG_INIT, "enabling hot key handling\n");
+ res = hotkey_status_set(1);
+ if (res) {
+ hotkey_exit();
+ return res;
+ }
+ res = hotkey_mask_set(((hotkey_all_mask | hotkey_source_mask)
+ & ~hotkey_reserved_mask)
+ | hotkey_orig_mask);
+ if (res < 0 && res != -ENXIO) {
+ hotkey_exit();
+ return res;
+ }
+
+ dbg_printk(TPACPI_DBG_INIT,
+ "legacy hot key reporting over procfs %s\n",
+ (hotkey_report_mode < 2) ?
+ "enabled" : "disabled");
+
+ tpacpi_inputdev->open = &hotkey_inputdev_open;
+ tpacpi_inputdev->close = &hotkey_inputdev_close;
+
+ hotkey_poll_setup_safe(1);
+ tpacpi_input_send_radiosw();
+ tpacpi_input_send_tabletsw();
+
+ return 0;
+
+err_exit:
+ delete_attr_set(hotkey_dev_attributes, &tpacpi_pdev->dev.kobj);
+ hotkey_dev_attributes = NULL;
+
+ return (res < 0)? res : 1;
}
static void hotkey_notify(struct ibm_struct *ibm, u32 event)
@@ -3319,7 +3336,7 @@
static int __init light_init(struct ibm_init_struct *iibm)
{
- int rc = 0;
+ int rc;
vdbg_printk(TPACPI_DBG_INIT, "initializing light subdriver\n");
@@ -3337,20 +3354,23 @@
tp_features.light_status =
acpi_evalf(ec_handle, NULL, "KBLT", "qv");
- vdbg_printk(TPACPI_DBG_INIT, "light is %s\n",
- str_supported(tp_features.light));
+ vdbg_printk(TPACPI_DBG_INIT, "light is %s, light status is %s\n",
+ str_supported(tp_features.light),
+ str_supported(tp_features.light_status));
- if (tp_features.light) {
- rc = led_classdev_register(&tpacpi_pdev->dev,
- &tpacpi_led_thinklight.led_classdev);
- }
+ if (!tp_features.light)
+ return 1;
+
+ rc = led_classdev_register(&tpacpi_pdev->dev,
+ &tpacpi_led_thinklight.led_classdev);
if (rc < 0) {
tp_features.light = 0;
tp_features.light_status = 0;
- } else {
- rc = (tp_features.light)? 0 : 1;
+ } else {
+ rc = 0;
}
+
return rc;
}
@@ -3821,7 +3841,7 @@
#define TPACPI_LED_NUMLEDS 8
static struct tpacpi_led_classdev *tpacpi_leds;
static enum led_status_t tpacpi_led_state_cache[TPACPI_LED_NUMLEDS];
-static const char const *tpacpi_led_names[TPACPI_LED_NUMLEDS] = {
+static const char * const tpacpi_led_names[TPACPI_LED_NUMLEDS] = {
/* there's a limit of 19 chars + NULL before 2.6.26 */
"tpacpi::power",
"tpacpi:orange:batt",
@@ -3833,7 +3853,7 @@
"tpacpi::standby",
};
-static int led_get_status(unsigned int led)
+static int led_get_status(const unsigned int led)
{
int status;
enum led_status_t led_s;
@@ -3857,41 +3877,42 @@
/* not reached */
}
-static int led_set_status(unsigned int led, enum led_status_t ledstatus)
+static int led_set_status(const unsigned int led,
+ const enum led_status_t ledstatus)
{
/* off, on, blink. Index is led_status_t */
- static const int const led_sled_arg1[] = { 0, 1, 3 };
- static const int const led_exp_hlbl[] = { 0, 0, 1 }; /* led# * */
- static const int const led_exp_hlcl[] = { 0, 1, 1 }; /* led# * */
- static const int const led_led_arg1[] = { 0, 0x80, 0xc0 };
+ static const unsigned int led_sled_arg1[] = { 0, 1, 3 };
+ static const unsigned int led_led_arg1[] = { 0, 0x80, 0xc0 };
int rc = 0;
switch (led_supported) {
case TPACPI_LED_570:
- /* 570 */
- led = 1 << led;
- if (!acpi_evalf(led_handle, NULL, NULL, "vdd",
- led, led_sled_arg1[ledstatus]))
- rc = -EIO;
- break;
+ /* 570 */
+ if (led > 7)
+ return -EINVAL;
+ if (!acpi_evalf(led_handle, NULL, NULL, "vdd",
+ (1 << led), led_sled_arg1[ledstatus]))
+ rc = -EIO;
+ break;
case TPACPI_LED_OLD:
- /* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20 */
- led = 1 << led;
- rc = ec_write(TPACPI_LED_EC_HLMS, led);
- if (rc >= 0)
- rc = ec_write(TPACPI_LED_EC_HLBL,
- led * led_exp_hlbl[ledstatus]);
- if (rc >= 0)
- rc = ec_write(TPACPI_LED_EC_HLCL,
- led * led_exp_hlcl[ledstatus]);
- break;
+ /* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20 */
+ if (led > 7)
+ return -EINVAL;
+ rc = ec_write(TPACPI_LED_EC_HLMS, (1 << led));
+ if (rc >= 0)
+ rc = ec_write(TPACPI_LED_EC_HLBL,
+ (ledstatus == TPACPI_LED_BLINK) << led);
+ if (rc >= 0)
+ rc = ec_write(TPACPI_LED_EC_HLCL,
+ (ledstatus != TPACPI_LED_OFF) << led);
+ break;
case TPACPI_LED_NEW:
- /* all others */
- if (!acpi_evalf(led_handle, NULL, NULL, "vdd",
- led, led_led_arg1[ledstatus]))
- rc = -EIO;
- break;
+ /* all others */
+ if (!acpi_evalf(led_handle, NULL, NULL, "vdd",
+ led, led_led_arg1[ledstatus]))
+ rc = -EIO;
+ break;
default:
rc = -ENXIO;
}
@@ -3978,7 +3999,6 @@
}
kfree(tpacpi_leds);
- tpacpi_leds = NULL;
}
static int __init led_init(struct ibm_init_struct *iibm)
@@ -4802,7 +4822,6 @@
vdbg_printk(TPACPI_DBG_EXIT,
"calling backlight_device_unregister()\n");
backlight_device_unregister(ibm_backlight_device);
- ibm_backlight_device = NULL;
}
}
@@ -5764,11 +5783,16 @@
fan_control_access_mode != TPACPI_FAN_WR_NONE) {
rc = sysfs_create_group(&tpacpi_sensors_pdev->dev.kobj,
&fan_attr_group);
- if (!(rc < 0))
- rc = driver_create_file(&tpacpi_hwmon_pdriver.driver,
- &driver_attr_fan_watchdog);
if (rc < 0)
return rc;
+
+ rc = driver_create_file(&tpacpi_hwmon_pdriver.driver,
+ &driver_attr_fan_watchdog);
+ if (rc < 0) {
+ sysfs_remove_group(&tpacpi_sensors_pdev->dev.kobj,
+ &fan_attr_group);
+ return rc;
+ }
return 0;
} else
return 1;
diff --git a/drivers/mmc/card/Kconfig b/drivers/mmc/card/Kconfig
index aa8a4e4..dd0f398 100644
--- a/drivers/mmc/card/Kconfig
+++ b/drivers/mmc/card/Kconfig
@@ -39,3 +39,15 @@
SDIO function driver for SDIO cards that implements the UART
class, as well as the GPS class which appears like a UART.
+config MMC_TEST
+ tristate "MMC host test driver"
+ default n
+ help
+ Development driver that performs a series of reads and writes
+ to a memory card in order to expose certain well known bugs
+ in host controllers. The tests are executed by writing to the
+ "test" file in sysfs under each card. Note that whatever is
+ on your card will be overwritten by these tests.
+
+ This driver is only of interest to those developing or
+ testing a host driver. Most people should say N here.
diff --git a/drivers/mmc/card/Makefile b/drivers/mmc/card/Makefile
index fc5a784..0d40751 100644
--- a/drivers/mmc/card/Makefile
+++ b/drivers/mmc/card/Makefile
@@ -8,6 +8,7 @@
obj-$(CONFIG_MMC_BLOCK) += mmc_block.o
mmc_block-objs := block.o queue.o
+obj-$(CONFIG_MMC_TEST) += mmc_test.o
obj-$(CONFIG_SDIO_UART) += sdio_uart.o
diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
index 91ded3e..f9ad960 100644
--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -46,7 +46,7 @@
#define MMC_SHIFT 3
#define MMC_NUM_MINORS (256 >> MMC_SHIFT)
-static unsigned long dev_use[MMC_NUM_MINORS/(8*sizeof(unsigned long))];
+static DECLARE_BITMAP(dev_use, MMC_NUM_MINORS);
/*
* There is one mmc_blk_data per slot.
diff --git a/drivers/mmc/card/mmc_test.c b/drivers/mmc/card/mmc_test.c
new file mode 100644
index 0000000..ffadee5
--- /dev/null
+++ b/drivers/mmc/card/mmc_test.c
@@ -0,0 +1,892 @@
+/*
+ * linux/drivers/mmc/card/mmc_test.c
+ *
+ * Copyright 2007 Pierre Ossman
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#include <linux/mmc/core.h>
+#include <linux/mmc/card.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/mmc.h>
+
+#include <linux/scatterlist.h>
+
+#define RESULT_OK 0
+#define RESULT_FAIL 1
+#define RESULT_UNSUP_HOST 2
+#define RESULT_UNSUP_CARD 3
+
+#define BUFFER_SIZE (PAGE_SIZE * 4)
+
+struct mmc_test_card {
+ struct mmc_card *card;
+
+ u8 *buffer;
+};
+
+/*******************************************************************/
+/* Helper functions */
+/*******************************************************************/
+
+static int mmc_test_set_blksize(struct mmc_test_card *test, unsigned size)
+{
+ struct mmc_command cmd;
+ int ret;
+
+ cmd.opcode = MMC_SET_BLOCKLEN;
+ cmd.arg = size;
+ cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
+ ret = mmc_wait_for_cmd(test->card->host, &cmd, 0);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int __mmc_test_transfer(struct mmc_test_card *test, int write,
+ unsigned broken_xfer, u8 *buffer, unsigned addr,
+ unsigned blocks, unsigned blksz)
+{
+ int ret, busy;
+
+ struct mmc_request mrq;
+ struct mmc_command cmd;
+ struct mmc_command stop;
+ struct mmc_data data;
+
+ struct scatterlist sg;
+
+ memset(&mrq, 0, sizeof(struct mmc_request));
+
+ mrq.cmd = &cmd;
+ mrq.data = &data;
+
+ memset(&cmd, 0, sizeof(struct mmc_command));
+
+ if (broken_xfer) {
+ if (blocks > 1) {
+ cmd.opcode = write ?
+ MMC_WRITE_BLOCK : MMC_READ_SINGLE_BLOCK;
+ } else {
+ cmd.opcode = MMC_SEND_STATUS;
+ }
+ } else {
+ if (blocks > 1) {
+ cmd.opcode = write ?
+ MMC_WRITE_MULTIPLE_BLOCK : MMC_READ_MULTIPLE_BLOCK;
+ } else {
+ cmd.opcode = write ?
+ MMC_WRITE_BLOCK : MMC_READ_SINGLE_BLOCK;
+ }
+ }
+
+ if (broken_xfer && blocks == 1)
+ cmd.arg = test->card->rca << 16;
+ else
+ cmd.arg = addr;
+ cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
+
+ memset(&stop, 0, sizeof(struct mmc_command));
+
+ if (!broken_xfer && (blocks > 1)) {
+ stop.opcode = MMC_STOP_TRANSMISSION;
+ stop.arg = 0;
+ stop.flags = MMC_RSP_R1B | MMC_CMD_AC;
+
+ mrq.stop = &stop;
+ }
+
+ memset(&data, 0, sizeof(struct mmc_data));
+
+ data.blksz = blksz;
+ data.blocks = blocks;
+ data.flags = write ? MMC_DATA_WRITE : MMC_DATA_READ;
+ data.sg = &sg;
+ data.sg_len = 1;
+
+ sg_init_one(&sg, buffer, blocks * blksz);
+
+ mmc_set_data_timeout(&data, test->card);
+
+ mmc_wait_for_req(test->card->host, &mrq);
+
+ ret = 0;
+
+ if (broken_xfer) {
+ if (!ret && cmd.error)
+ ret = cmd.error;
+ if (!ret && data.error == 0)
+ ret = RESULT_FAIL;
+ if (!ret && data.error != -ETIMEDOUT)
+ ret = data.error;
+ if (!ret && stop.error)
+ ret = stop.error;
+ if (blocks > 1) {
+ if (!ret && data.bytes_xfered > blksz)
+ ret = RESULT_FAIL;
+ } else {
+ if (!ret && data.bytes_xfered > 0)
+ ret = RESULT_FAIL;
+ }
+ } else {
+ if (!ret && cmd.error)
+ ret = cmd.error;
+ if (!ret && data.error)
+ ret = data.error;
+ if (!ret && stop.error)
+ ret = stop.error;
+ if (!ret && data.bytes_xfered != blocks * blksz)
+ ret = RESULT_FAIL;
+ }
+
+ if (ret == -EINVAL)
+ ret = RESULT_UNSUP_HOST;
+
+ busy = 0;
+ do {
+ int ret2;
+
+ memset(&cmd, 0, sizeof(struct mmc_command));
+
+ cmd.opcode = MMC_SEND_STATUS;
+ cmd.arg = test->card->rca << 16;
+ cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
+
+ ret2 = mmc_wait_for_cmd(test->card->host, &cmd, 0);
+ if (ret2)
+ break;
+
+ if (!busy && !(cmd.resp[0] & R1_READY_FOR_DATA)) {
+ busy = 1;
+ printk(KERN_INFO "%s: Warning: Host did not "
+ "wait for busy state to end.\n",
+ mmc_hostname(test->card->host));
+ }
+ } while (!(cmd.resp[0] & R1_READY_FOR_DATA));
+
+ return ret;
+}
+
+static int mmc_test_transfer(struct mmc_test_card *test, int write,
+ u8 *buffer, unsigned addr, unsigned blocks, unsigned blksz)
+{
+ return __mmc_test_transfer(test, write, 0, buffer,
+ addr, blocks, blksz);
+}
+
+static int mmc_test_prepare_verify(struct mmc_test_card *test, int write)
+{
+ int ret, i;
+
+ ret = mmc_test_set_blksize(test, 512);
+ if (ret)
+ return ret;
+
+ if (write)
+ memset(test->buffer, 0xDF, BUFFER_SIZE);
+ else {
+ for (i = 0;i < BUFFER_SIZE;i++)
+ test->buffer[i] = i;
+ }
+
+ for (i = 0;i < BUFFER_SIZE / 512;i++) {
+ ret = mmc_test_transfer(test, 1, test->buffer + i * 512,
+ i * 512, 1, 512);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int mmc_test_prepare_verify_write(struct mmc_test_card *test)
+{
+ return mmc_test_prepare_verify(test, 1);
+}
+
+static int mmc_test_prepare_verify_read(struct mmc_test_card *test)
+{
+ return mmc_test_prepare_verify(test, 0);
+}
+
+static int mmc_test_verified_transfer(struct mmc_test_card *test, int write,
+ u8 *buffer, unsigned addr, unsigned blocks, unsigned blksz)
+{
+ int ret, i, sectors;
+
+ /*
+ * It is assumed that the above preparation has been done.
+ */
+
+ memset(test->buffer, 0, BUFFER_SIZE);
+
+ if (write) {
+ for (i = 0;i < blocks * blksz;i++)
+ buffer[i] = i;
+ }
+
+ ret = mmc_test_set_blksize(test, blksz);
+ if (ret)
+ return ret;
+
+ ret = mmc_test_transfer(test, write, buffer, addr, blocks, blksz);
+ if (ret)
+ return ret;
+
+ if (write) {
+ ret = mmc_test_set_blksize(test, 512);
+ if (ret)
+ return ret;
+
+ sectors = (blocks * blksz + 511) / 512;
+ if ((sectors * 512) == (blocks * blksz))
+ sectors++;
+
+ if ((sectors * 512) > BUFFER_SIZE)
+ return -EINVAL;
+
+ memset(test->buffer, 0, sectors * 512);
+
+ for (i = 0;i < sectors;i++) {
+ ret = mmc_test_transfer(test, 0,
+ test->buffer + i * 512,
+ addr + i * 512, 1, 512);
+ if (ret)
+ return ret;
+ }
+
+ for (i = 0;i < blocks * blksz;i++) {
+ if (test->buffer[i] != (u8)i)
+ return RESULT_FAIL;
+ }
+
+ for (;i < sectors * 512;i++) {
+ if (test->buffer[i] != 0xDF)
+ return RESULT_FAIL;
+ }
+ } else {
+ for (i = 0;i < blocks * blksz;i++) {
+ if (buffer[i] != (u8)i)
+ return RESULT_FAIL;
+ }
+ }
+
+ return 0;
+}
+
+static int mmc_test_cleanup_verify(struct mmc_test_card *test)
+{
+ int ret, i;
+
+ ret = mmc_test_set_blksize(test, 512);
+ if (ret)
+ return ret;
+
+ memset(test->buffer, 0, BUFFER_SIZE);
+
+ for (i = 0;i < BUFFER_SIZE / 512;i++) {
+ ret = mmc_test_transfer(test, 1, test->buffer + i * 512,
+ i * 512, 1, 512);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+/*******************************************************************/
+/* Tests */
+/*******************************************************************/
+
+struct mmc_test_case {
+ const char *name;
+
+ int (*prepare)(struct mmc_test_card *);
+ int (*run)(struct mmc_test_card *);
+ int (*cleanup)(struct mmc_test_card *);
+};
+
+static int mmc_test_basic_write(struct mmc_test_card *test)
+{
+ int ret;
+
+ ret = mmc_test_set_blksize(test, 512);
+ if (ret)
+ return ret;
+
+ ret = mmc_test_transfer(test, 1, test->buffer, 0, 1, 512);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int mmc_test_basic_read(struct mmc_test_card *test)
+{
+ int ret;
+
+ ret = mmc_test_set_blksize(test, 512);
+ if (ret)
+ return ret;
+
+ ret = mmc_test_transfer(test, 0, test->buffer, 0, 1, 512);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int mmc_test_verify_write(struct mmc_test_card *test)
+{
+ int ret;
+
+ ret = mmc_test_verified_transfer(test, 1, test->buffer, 0, 1, 512);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int mmc_test_verify_read(struct mmc_test_card *test)
+{
+ int ret;
+
+ ret = mmc_test_verified_transfer(test, 0, test->buffer, 0, 1, 512);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int mmc_test_multi_write(struct mmc_test_card *test)
+{
+ int ret;
+ unsigned int size;
+
+ if (test->card->host->max_blk_count == 1)
+ return RESULT_UNSUP_HOST;
+
+ size = PAGE_SIZE * 2;
+ size = min(size, test->card->host->max_req_size);
+ size = min(size, test->card->host->max_seg_size);
+ size = min(size, test->card->host->max_blk_count * 512);
+
+ if (size < 1024)
+ return RESULT_UNSUP_HOST;
+
+ ret = mmc_test_verified_transfer(test, 1, test->buffer, 0,
+ size / 512, 512);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int mmc_test_multi_read(struct mmc_test_card *test)
+{
+ int ret;
+ unsigned int size;
+
+ if (test->card->host->max_blk_count == 1)
+ return RESULT_UNSUP_HOST;
+
+ size = PAGE_SIZE * 2;
+ size = min(size, test->card->host->max_req_size);
+ size = min(size, test->card->host->max_seg_size);
+ size = min(size, test->card->host->max_blk_count * 512);
+
+ if (size < 1024)
+ return RESULT_UNSUP_HOST;
+
+ ret = mmc_test_verified_transfer(test, 0, test->buffer, 0,
+ size / 512, 512);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int mmc_test_pow2_write(struct mmc_test_card *test)
+{
+ int ret, i;
+
+ if (!test->card->csd.write_partial)
+ return RESULT_UNSUP_CARD;
+
+ for (i = 1; i < 512;i <<= 1) {
+ ret = mmc_test_verified_transfer(test, 1,
+ test->buffer, 0, 1, i);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int mmc_test_pow2_read(struct mmc_test_card *test)
+{
+ int ret, i;
+
+ if (!test->card->csd.read_partial)
+ return RESULT_UNSUP_CARD;
+
+ for (i = 1; i < 512;i <<= 1) {
+ ret = mmc_test_verified_transfer(test, 0,
+ test->buffer, 0, 1, i);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int mmc_test_weird_write(struct mmc_test_card *test)
+{
+ int ret, i;
+
+ if (!test->card->csd.write_partial)
+ return RESULT_UNSUP_CARD;
+
+ for (i = 3; i < 512;i += 7) {
+ ret = mmc_test_verified_transfer(test, 1,
+ test->buffer, 0, 1, i);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int mmc_test_weird_read(struct mmc_test_card *test)
+{
+ int ret, i;
+
+ if (!test->card->csd.read_partial)
+ return RESULT_UNSUP_CARD;
+
+ for (i = 3; i < 512;i += 7) {
+ ret = mmc_test_verified_transfer(test, 0,
+ test->buffer, 0, 1, i);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int mmc_test_align_write(struct mmc_test_card *test)
+{
+ int ret, i;
+
+ for (i = 1;i < 4;i++) {
+ ret = mmc_test_verified_transfer(test, 1, test->buffer + i,
+ 0, 1, 512);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int mmc_test_align_read(struct mmc_test_card *test)
+{
+ int ret, i;
+
+ for (i = 1;i < 4;i++) {
+ ret = mmc_test_verified_transfer(test, 0, test->buffer + i,
+ 0, 1, 512);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int mmc_test_align_multi_write(struct mmc_test_card *test)
+{
+ int ret, i;
+ unsigned int size;
+
+ if (test->card->host->max_blk_count == 1)
+ return RESULT_UNSUP_HOST;
+
+ size = PAGE_SIZE * 2;
+ size = min(size, test->card->host->max_req_size);
+ size = min(size, test->card->host->max_seg_size);
+ size = min(size, test->card->host->max_blk_count * 512);
+
+ if (size < 1024)
+ return RESULT_UNSUP_HOST;
+
+ for (i = 1;i < 4;i++) {
+ ret = mmc_test_verified_transfer(test, 1, test->buffer + i,
+ 0, size / 512, 512);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int mmc_test_align_multi_read(struct mmc_test_card *test)
+{
+ int ret, i;
+ unsigned int size;
+
+ if (test->card->host->max_blk_count == 1)
+ return RESULT_UNSUP_HOST;
+
+ size = PAGE_SIZE * 2;
+ size = min(size, test->card->host->max_req_size);
+ size = min(size, test->card->host->max_seg_size);
+ size = min(size, test->card->host->max_blk_count * 512);
+
+ if (size < 1024)
+ return RESULT_UNSUP_HOST;
+
+ for (i = 1;i < 4;i++) {
+ ret = mmc_test_verified_transfer(test, 0, test->buffer + i,
+ 0, size / 512, 512);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int mmc_test_xfersize_write(struct mmc_test_card *test)
+{
+ int ret;
+
+ ret = mmc_test_set_blksize(test, 512);
+ if (ret)
+ return ret;
+
+ ret = __mmc_test_transfer(test, 1, 1, test->buffer, 0, 1, 512);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int mmc_test_xfersize_read(struct mmc_test_card *test)
+{
+ int ret;
+
+ ret = mmc_test_set_blksize(test, 512);
+ if (ret)
+ return ret;
+
+ ret = __mmc_test_transfer(test, 0, 1, test->buffer, 0, 1, 512);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int mmc_test_multi_xfersize_write(struct mmc_test_card *test)
+{
+ int ret;
+
+ if (test->card->host->max_blk_count == 1)
+ return RESULT_UNSUP_HOST;
+
+ ret = mmc_test_set_blksize(test, 512);
+ if (ret)
+ return ret;
+
+ ret = __mmc_test_transfer(test, 1, 1, test->buffer, 0, 2, 512);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static int mmc_test_multi_xfersize_read(struct mmc_test_card *test)
+{
+ int ret;
+
+ if (test->card->host->max_blk_count == 1)
+ return RESULT_UNSUP_HOST;
+
+ ret = mmc_test_set_blksize(test, 512);
+ if (ret)
+ return ret;
+
+ ret = __mmc_test_transfer(test, 0, 1, test->buffer, 0, 2, 512);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static const struct mmc_test_case mmc_test_cases[] = {
+ {
+ .name = "Basic write (no data verification)",
+ .run = mmc_test_basic_write,
+ },
+
+ {
+ .name = "Basic read (no data verification)",
+ .run = mmc_test_basic_read,
+ },
+
+ {
+ .name = "Basic write (with data verification)",
+ .prepare = mmc_test_prepare_verify_write,
+ .run = mmc_test_verify_write,
+ .cleanup = mmc_test_cleanup_verify,
+ },
+
+ {
+ .name = "Basic read (with data verification)",
+ .prepare = mmc_test_prepare_verify_read,
+ .run = mmc_test_verify_read,
+ .cleanup = mmc_test_cleanup_verify,
+ },
+
+ {
+ .name = "Multi-block write",
+ .prepare = mmc_test_prepare_verify_write,
+ .run = mmc_test_multi_write,
+ .cleanup = mmc_test_cleanup_verify,
+ },
+
+ {
+ .name = "Multi-block read",
+ .prepare = mmc_test_prepare_verify_read,
+ .run = mmc_test_multi_read,
+ .cleanup = mmc_test_cleanup_verify,
+ },
+
+ {
+ .name = "Power of two block writes",
+ .prepare = mmc_test_prepare_verify_write,
+ .run = mmc_test_pow2_write,
+ .cleanup = mmc_test_cleanup_verify,
+ },
+
+ {
+ .name = "Power of two block reads",
+ .prepare = mmc_test_prepare_verify_read,
+ .run = mmc_test_pow2_read,
+ .cleanup = mmc_test_cleanup_verify,
+ },
+
+ {
+ .name = "Weird sized block writes",
+ .prepare = mmc_test_prepare_verify_write,
+ .run = mmc_test_weird_write,
+ .cleanup = mmc_test_cleanup_verify,
+ },
+
+ {
+ .name = "Weird sized block reads",
+ .prepare = mmc_test_prepare_verify_read,
+ .run = mmc_test_weird_read,
+ .cleanup = mmc_test_cleanup_verify,
+ },
+
+ {
+ .name = "Badly aligned write",
+ .prepare = mmc_test_prepare_verify_write,
+ .run = mmc_test_align_write,
+ .cleanup = mmc_test_cleanup_verify,
+ },
+
+ {
+ .name = "Badly aligned read",
+ .prepare = mmc_test_prepare_verify_read,
+ .run = mmc_test_align_read,
+ .cleanup = mmc_test_cleanup_verify,
+ },
+
+ {
+ .name = "Badly aligned multi-block write",
+ .prepare = mmc_test_prepare_verify_write,
+ .run = mmc_test_align_multi_write,
+ .cleanup = mmc_test_cleanup_verify,
+ },
+
+ {
+ .name = "Badly aligned multi-block read",
+ .prepare = mmc_test_prepare_verify_read,
+ .run = mmc_test_align_multi_read,
+ .cleanup = mmc_test_cleanup_verify,
+ },
+
+ {
+ .name = "Correct xfer_size at write (start failure)",
+ .run = mmc_test_xfersize_write,
+ },
+
+ {
+ .name = "Correct xfer_size at read (start failure)",
+ .run = mmc_test_xfersize_read,
+ },
+
+ {
+ .name = "Correct xfer_size at write (midway failure)",
+ .run = mmc_test_multi_xfersize_write,
+ },
+
+ {
+ .name = "Correct xfer_size at read (midway failure)",
+ .run = mmc_test_multi_xfersize_read,
+ },
+};
+
+static struct mutex mmc_test_lock;
+
+static void mmc_test_run(struct mmc_test_card *test)
+{
+ int i, ret;
+
+ printk(KERN_INFO "%s: Starting tests of card %s...\n",
+ mmc_hostname(test->card->host), mmc_card_id(test->card));
+
+ mmc_claim_host(test->card->host);
+
+ for (i = 0;i < ARRAY_SIZE(mmc_test_cases);i++) {
+ printk(KERN_INFO "%s: Test case %d. %s...\n",
+ mmc_hostname(test->card->host), i + 1,
+ mmc_test_cases[i].name);
+
+ if (mmc_test_cases[i].prepare) {
+ ret = mmc_test_cases[i].prepare(test);
+ if (ret) {
+ printk(KERN_INFO "%s: Result: Prepare "
+ "stage failed! (%d)\n",
+ mmc_hostname(test->card->host),
+ ret);
+ continue;
+ }
+ }
+
+ ret = mmc_test_cases[i].run(test);
+ switch (ret) {
+ case RESULT_OK:
+ printk(KERN_INFO "%s: Result: OK\n",
+ mmc_hostname(test->card->host));
+ break;
+ case RESULT_FAIL:
+ printk(KERN_INFO "%s: Result: FAILED\n",
+ mmc_hostname(test->card->host));
+ break;
+ case RESULT_UNSUP_HOST:
+ printk(KERN_INFO "%s: Result: UNSUPPORTED "
+ "(by host)\n",
+ mmc_hostname(test->card->host));
+ break;
+ case RESULT_UNSUP_CARD:
+ printk(KERN_INFO "%s: Result: UNSUPPORTED "
+ "(by card)\n",
+ mmc_hostname(test->card->host));
+ break;
+ default:
+ printk(KERN_INFO "%s: Result: ERROR (%d)\n",
+ mmc_hostname(test->card->host), ret);
+ }
+
+ if (mmc_test_cases[i].cleanup) {
+ ret = mmc_test_cases[i].cleanup(test);
+ if (ret) {
+ printk(KERN_INFO "%s: Warning: Cleanup "
+ "stage failed! (%d)\n",
+ mmc_hostname(test->card->host),
+ ret);
+ }
+ }
+ }
+
+ mmc_release_host(test->card->host);
+
+ printk(KERN_INFO "%s: Tests completed.\n",
+ mmc_hostname(test->card->host));
+}
+
+static ssize_t mmc_test_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ mutex_lock(&mmc_test_lock);
+ mutex_unlock(&mmc_test_lock);
+
+ return 0;
+}
+
+static ssize_t mmc_test_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct mmc_card *card;
+ struct mmc_test_card *test;
+
+ card = container_of(dev, struct mmc_card, dev);
+
+ test = kzalloc(sizeof(struct mmc_test_card), GFP_KERNEL);
+ if (!test)
+ return -ENOMEM;
+
+ test->card = card;
+
+ test->buffer = kzalloc(BUFFER_SIZE, GFP_KERNEL);
+ if (test->buffer) {
+ mutex_lock(&mmc_test_lock);
+ mmc_test_run(test);
+ mutex_unlock(&mmc_test_lock);
+ }
+
+ kfree(test->buffer);
+ kfree(test);
+
+ return count;
+}
+
+static DEVICE_ATTR(test, S_IWUSR | S_IRUGO, mmc_test_show, mmc_test_store);
+
+static int mmc_test_probe(struct mmc_card *card)
+{
+ int ret;
+
+ mutex_init(&mmc_test_lock);
+
+ ret = device_create_file(&card->dev, &dev_attr_test);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static void mmc_test_remove(struct mmc_card *card)
+{
+ device_remove_file(&card->dev, &dev_attr_test);
+}
+
+static struct mmc_driver mmc_driver = {
+ .drv = {
+ .name = "mmc_test",
+ },
+ .probe = mmc_test_probe,
+ .remove = mmc_test_remove,
+};
+
+static int __init mmc_test_init(void)
+{
+ return mmc_register_driver(&mmc_driver);
+}
+
+static void __exit mmc_test_exit(void)
+{
+ mmc_unregister_driver(&mmc_driver);
+}
+
+module_init(mmc_test_init);
+module_exit(mmc_test_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Multimedia Card (MMC) host test driver");
+MODULE_AUTHOR("Pierre Ossman");
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 3b3cd0e..dead617 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -119,7 +119,7 @@
config MMC_SPI
tristate "MMC/SD over SPI"
- depends on MMC && SPI_MASTER && !HIGHMEM
+ depends on MMC && SPI_MASTER && !HIGHMEM && HAS_DMA
select CRC7
select CRC_ITU_T
help
diff --git a/drivers/mmc/host/at91_mci.c b/drivers/mmc/host/at91_mci.c
index a28fc2f..8979ad3 100644
--- a/drivers/mmc/host/at91_mci.c
+++ b/drivers/mmc/host/at91_mci.c
@@ -663,9 +663,12 @@
gpio_set_value(host->board->vcc_pin, 0);
break;
case MMC_POWER_UP:
- case MMC_POWER_ON:
gpio_set_value(host->board->vcc_pin, 1);
break;
+ case MMC_POWER_ON:
+ break;
+ default:
+ WARN_ON(1);
}
}
}
diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c
index 14759e9..549517c 100644
--- a/drivers/mmc/host/omap.c
+++ b/drivers/mmc/host/omap.c
@@ -1003,7 +1003,7 @@
static int mmc_omap_get_dma_channel(struct mmc_omap_host *host, struct mmc_data *data)
{
- const char *dev_name;
+ const char *dma_dev_name;
int sync_dev, dma_ch, is_read, r;
is_read = !(data->flags & MMC_DATA_WRITE);
@@ -1018,21 +1018,21 @@
if (is_read) {
if (host->id == 1) {
sync_dev = OMAP_DMA_MMC_RX;
- dev_name = "MMC1 read";
+ dma_dev_name = "MMC1 read";
} else {
sync_dev = OMAP_DMA_MMC2_RX;
- dev_name = "MMC2 read";
+ dma_dev_name = "MMC2 read";
}
} else {
if (host->id == 1) {
sync_dev = OMAP_DMA_MMC_TX;
- dev_name = "MMC1 write";
+ dma_dev_name = "MMC1 write";
} else {
sync_dev = OMAP_DMA_MMC2_TX;
- dev_name = "MMC2 write";
+ dma_dev_name = "MMC2 write";
}
}
- r = omap_request_dma(sync_dev, dev_name, mmc_omap_dma_cb,
+ r = omap_request_dma(sync_dev, dma_dev_name, mmc_omap_dma_cb,
host, &dma_ch);
if (r != 0) {
dev_dbg(mmc_dev(host->mmc), "omap_request_dma() failed with %d\n", r);
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 7fb02e1..299118d 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -187,7 +187,7 @@
struct mmc_request *mrq; /* Current request */
struct mmc_command *cmd; /* Current command */
struct mmc_data *data; /* Current data request */
- int data_early:1; /* Data finished before cmd */
+ unsigned int data_early:1; /* Data finished before cmd */
struct scatterlist *cur_sg; /* We're working on this */
int num_sg; /* Entries left */
diff --git a/drivers/mmc/host/wbsd.c b/drivers/mmc/host/wbsd.c
index be624a0..c303e7f 100644
--- a/drivers/mmc/host/wbsd.c
+++ b/drivers/mmc/host/wbsd.c
@@ -1457,17 +1457,7 @@
int ret;
/*
- * Allocate interrupt.
- */
-
- ret = request_irq(irq, wbsd_irq, IRQF_SHARED, DRIVER_NAME, host);
- if (ret)
- return ret;
-
- host->irq = irq;
-
- /*
- * Set up tasklets.
+ * Set up tasklets. Must be done before requesting interrupt.
*/
tasklet_init(&host->card_tasklet, wbsd_tasklet_card,
(unsigned long)host);
@@ -1480,6 +1470,15 @@
tasklet_init(&host->finish_tasklet, wbsd_tasklet_finish,
(unsigned long)host);
+ /*
+ * Allocate interrupt.
+ */
+ ret = request_irq(irq, wbsd_irq, IRQF_SHARED, DRIVER_NAME, host);
+ if (ret)
+ return ret;
+
+ host->irq = irq;
+
return 0;
}
diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index 25efd33..b402269 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -346,8 +346,10 @@
mutex_lock(&flash->lock);
/* Wait until finished previous write command. */
- if (wait_till_ready(flash))
+ if (wait_till_ready(flash)) {
+ mutex_unlock(&flash->lock);
return 1;
+ }
write_enable(flash);
diff --git a/drivers/mtd/maps/ck804xrom.c b/drivers/mtd/maps/ck804xrom.c
index 59d8fb4..effaf7cd 100644
--- a/drivers/mtd/maps/ck804xrom.c
+++ b/drivers/mtd/maps/ck804xrom.c
@@ -331,15 +331,15 @@
}
static struct pci_device_id ck804xrom_pci_tbl[] = {
- { PCI_VENDOR_ID_NVIDIA, 0x0051, PCI_ANY_ID, PCI_ANY_ID, DEV_CK804 },
- { PCI_VENDOR_ID_NVIDIA, 0x0360, PCI_ANY_ID, PCI_ANY_ID, DEV_MCP55 },
- { PCI_VENDOR_ID_NVIDIA, 0x0361, PCI_ANY_ID, PCI_ANY_ID, DEV_MCP55 },
- { PCI_VENDOR_ID_NVIDIA, 0x0362, PCI_ANY_ID, PCI_ANY_ID, DEV_MCP55 },
- { PCI_VENDOR_ID_NVIDIA, 0x0363, PCI_ANY_ID, PCI_ANY_ID, DEV_MCP55 },
- { PCI_VENDOR_ID_NVIDIA, 0x0364, PCI_ANY_ID, PCI_ANY_ID, DEV_MCP55 },
- { PCI_VENDOR_ID_NVIDIA, 0x0365, PCI_ANY_ID, PCI_ANY_ID, DEV_MCP55 },
- { PCI_VENDOR_ID_NVIDIA, 0x0366, PCI_ANY_ID, PCI_ANY_ID, DEV_MCP55 },
- { PCI_VENDOR_ID_NVIDIA, 0x0367, PCI_ANY_ID, PCI_ANY_ID, DEV_MCP55 },
+ { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, 0x0051), .driver_data = DEV_CK804 },
+ { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, 0x0360), .driver_data = DEV_MCP55 },
+ { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, 0x0361), .driver_data = DEV_MCP55 },
+ { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, 0x0362), .driver_data = DEV_MCP55 },
+ { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, 0x0363), .driver_data = DEV_MCP55 },
+ { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, 0x0364), .driver_data = DEV_MCP55 },
+ { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, 0x0365), .driver_data = DEV_MCP55 },
+ { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, 0x0366), .driver_data = DEV_MCP55 },
+ { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, 0x0367), .driver_data = DEV_MCP55 },
{ 0, }
};
diff --git a/drivers/mtd/maps/omap_nor.c b/drivers/mtd/maps/omap_nor.c
index 240b0e2..c12d805 100644
--- a/drivers/mtd/maps/omap_nor.c
+++ b/drivers/mtd/maps/omap_nor.c
@@ -110,7 +110,7 @@
err = parse_mtd_partitions(info->mtd, part_probes, &info->parts, 0);
if (err > 0)
add_mtd_partitions(info->mtd, info->parts, err);
- else if (err < 0 && pdata->parts)
+ else if (err <= 0 && pdata->parts)
add_mtd_partitions(info->mtd, pdata->parts, pdata->nr_parts);
else
#endif
diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
index fceb468..fe2bc7e 100644
--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -1216,7 +1216,7 @@
clk_enable(info->clk);
- return pxa3xx_nand_config_flash(info);
+ return pxa3xx_nand_config_flash(info, info->flash_info);
}
#else
#define pxa3xx_nand_suspend NULL
diff --git a/drivers/mtd/onenand/generic.c b/drivers/mtd/onenand/generic.c
index 3d44d04..ad81ab8 100644
--- a/drivers/mtd/onenand/generic.c
+++ b/drivers/mtd/onenand/generic.c
@@ -76,7 +76,7 @@
err = parse_mtd_partitions(&info->mtd, part_probes, &info->parts, 0);
if (err > 0)
add_mtd_partitions(&info->mtd, info->parts, err);
- else if (err < 0 && pdata->parts)
+ else if (err <= 0 && pdata->parts)
add_mtd_partitions(&info->mtd, pdata->parts, pdata->nr_parts);
else
#endif
diff --git a/drivers/mtd/redboot.c b/drivers/mtd/redboot.c
index 4747490..c5030f9 100644
--- a/drivers/mtd/redboot.c
+++ b/drivers/mtd/redboot.c
@@ -295,5 +295,5 @@
module_exit(redboot_parser_exit);
MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Red Hat, Inc. - David Woodhouse <dwmw2@cambridge.redhat.com>");
+MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>");
MODULE_DESCRIPTION("Parsing code for RedBoot Flash Image System (FIS) tables");
diff --git a/drivers/net/3c509.c b/drivers/net/3c509.c
index e6c545f..b9d097c 100644
--- a/drivers/net/3c509.c
+++ b/drivers/net/3c509.c
@@ -413,7 +413,7 @@
{
short i;
int ioaddr, irq, if_port;
- u16 phys_addr[3];
+ __be16 phys_addr[3];
struct net_device *dev = NULL;
int err;
@@ -605,7 +605,7 @@
short i;
int ioaddr, irq, if_port;
- u16 phys_addr[3];
+ __be16 phys_addr[3];
struct net_device *dev = NULL;
u_char pos4, pos5;
struct mca_device *mdev = to_mca_device(device);
@@ -635,14 +635,13 @@
printk(KERN_DEBUG "3c529: irq %d ioaddr 0x%x ifport %d\n", irq, ioaddr, if_port);
}
EL3WINDOW(0);
- for (i = 0; i < 3; i++) {
- phys_addr[i] = htons(read_eeprom(ioaddr, i));
- }
+ for (i = 0; i < 3; i++)
+ phys_addr[i] = htons(read_eeprom(ioaddr, i));
dev = alloc_etherdev(sizeof (struct el3_private));
if (dev == NULL) {
- release_region(ioaddr, EL3_IO_EXTENT);
- return -ENOMEM;
+ release_region(ioaddr, EL3_IO_EXTENT);
+ return -ENOMEM;
}
netdev_boot_setup_check(dev);
@@ -668,7 +667,7 @@
{
short i;
int ioaddr, irq, if_port;
- u16 phys_addr[3];
+ __be16 phys_addr[3];
struct net_device *dev = NULL;
struct eisa_device *edev;
int err;
@@ -1063,7 +1062,6 @@
struct sk_buff *skb;
skb = dev_alloc_skb(pkt_len+5);
- dev->stats.rx_bytes += pkt_len;
if (el3_debug > 4)
printk("Receiving packet size %d status %4.4x.\n",
pkt_len, rx_status);
@@ -1078,6 +1076,7 @@
skb->protocol = eth_type_trans(skb,dev);
netif_rx(skb);
dev->last_rx = jiffies;
+ dev->stats.rx_bytes += pkt_len;
dev->stats.rx_packets++;
continue;
}
diff --git a/drivers/net/7990.c b/drivers/net/7990.c
index 750a46f..ad6b8a5 100644
--- a/drivers/net/7990.c
+++ b/drivers/net/7990.c
@@ -506,6 +506,7 @@
return res;
}
+EXPORT_SYMBOL_GPL(lance_open);
int lance_close (struct net_device *dev)
{
@@ -521,6 +522,7 @@
return 0;
}
+EXPORT_SYMBOL_GPL(lance_close);
void lance_tx_timeout(struct net_device *dev)
{
@@ -529,7 +531,7 @@
dev->trans_start = jiffies;
netif_wake_queue (dev);
}
-
+EXPORT_SYMBOL_GPL(lance_tx_timeout);
int lance_start_xmit (struct sk_buff *skb, struct net_device *dev)
{
@@ -586,6 +588,7 @@
return 0;
}
+EXPORT_SYMBOL_GPL(lance_start_xmit);
/* taken from the depca driver via a2065.c */
static void lance_load_multicast (struct net_device *dev)
@@ -654,6 +657,7 @@
if (!stopped)
netif_start_queue (dev);
}
+EXPORT_SYMBOL_GPL(lance_set_multicast);
#ifdef CONFIG_NET_POLL_CONTROLLER
void lance_poll(struct net_device *dev)
diff --git a/drivers/net/82596.c b/drivers/net/82596.c
index 2797da7..da292e6 100644
--- a/drivers/net/82596.c
+++ b/drivers/net/82596.c
@@ -1162,6 +1162,7 @@
memcpy(eth_addr, (void *) 0xfffc1f2c, 6); /* YUCK! Get addr from NOVRAM */
dev->base_addr = MVME_I596_BASE;
dev->irq = (unsigned) MVME16x_IRQ_I596;
+ goto found;
}
#endif
#ifdef ENABLE_BVME6000_NET
@@ -1176,6 +1177,7 @@
rtc[3] = msr;
dev->base_addr = BVME_I596_BASE;
dev->irq = (unsigned) BVME_IRQ_I596;
+ goto found;
}
#endif
#ifdef ENABLE_APRICOT
@@ -1212,8 +1214,13 @@
}
dev->irq = 10;
+ goto found;
}
#endif
+ err = -ENODEV;
+ goto out;
+
+found:
dev->mem_start = (int)__get_free_pages(GFP_ATOMIC, 0);
if (!dev->mem_start) {
err = -ENOMEM;
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index d27f54a..f4182cf 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1353,7 +1353,7 @@
config B44
tristate "Broadcom 440x/47xx ethernet support"
- depends on SSB_POSSIBLE
+ depends on SSB_POSSIBLE && HAS_DMA
select SSB
select MII
help
diff --git a/drivers/net/apne.c b/drivers/net/apne.c
index 47a8275..867f6ff 100644
--- a/drivers/net/apne.c
+++ b/drivers/net/apne.c
@@ -127,6 +127,9 @@
#endif
int err;
+ if (!MACH_IS_AMIGA)
+ return ERR_PTR(-ENODEV);
+
if (apne_owned)
return ERR_PTR(-ENODEV);
diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c
index 0afe522..99e0b4c 100644
--- a/drivers/net/atlx/atl1.c
+++ b/drivers/net/atlx/atl1.c
@@ -1,7 +1,7 @@
/*
* Copyright(c) 2005 - 2006 Attansic Corporation. All rights reserved.
* Copyright(c) 2006 - 2007 Chris Snook <csnook@redhat.com>
- * Copyright(c) 2006 Jay Cliburn <jcliburn@gmail.com>
+ * Copyright(c) 2006 - 2008 Jay Cliburn <jcliburn@gmail.com>
*
* Derived from Intel e1000 driver
* Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
@@ -36,7 +36,6 @@
* A very incomplete list of things that need to be dealt with:
*
* TODO:
- * Wake on LAN.
* Add more ethtool functions.
* Fix abstruse irq enable/disable condition described here:
* http://marc.theaimsgroup.com/?l=linux-netdev&m=116398508500553&w=2
@@ -638,25 +637,6 @@
}
/*
- *TODO: do something or get rid of this
- */
-#ifdef CONFIG_PM
-static s32 atl1_phy_enter_power_saving(struct atl1_hw *hw)
-{
-/* s32 ret_val;
- * u16 phy_data;
- */
-
-/*
- ret_val = atl1_write_phy_reg(hw, ...);
- ret_val = atl1_write_phy_reg(hw, ...);
- ....
-*/
- return 0;
-}
-#endif
-
-/*
* Resets the PHY and make all config validate
* hw - Struct containing variables accessed by shared code
*
@@ -2027,6 +2007,7 @@
/* Good Receive */
pci_unmap_page(adapter->pdev, buffer_info->dma,
buffer_info->length, PCI_DMA_FROMDEVICE);
+ buffer_info->dma = 0;
skb = buffer_info->skb;
length = le16_to_cpu(rrd->xsz.xsum_sz.pkt_size);
@@ -2139,7 +2120,7 @@
return -1;
}
- if (skb->protocol == ntohs(ETH_P_IP)) {
+ if (skb->protocol == htons(ETH_P_IP)) {
struct iphdr *iph = ip_hdr(skb);
real_len = (((unsigned char *)iph - skb->data) +
@@ -2784,64 +2765,92 @@
struct atl1_hw *hw = &adapter->hw;
u32 ctrl = 0;
u32 wufc = adapter->wol;
+ u32 val;
+ int retval;
+ u16 speed;
+ u16 duplex;
netif_device_detach(netdev);
if (netif_running(netdev))
atl1_down(adapter);
+ retval = pci_save_state(pdev);
+ if (retval)
+ return retval;
+
atl1_read_phy_reg(hw, MII_BMSR, (u16 *) & ctrl);
atl1_read_phy_reg(hw, MII_BMSR, (u16 *) & ctrl);
- if (ctrl & BMSR_LSTATUS)
+ val = ctrl & BMSR_LSTATUS;
+ if (val)
wufc &= ~ATLX_WUFC_LNKC;
- /* reduce speed to 10/100M */
- if (wufc) {
- atl1_phy_enter_power_saving(hw);
- /* if resume, let driver to re- setup link */
- hw->phy_configured = false;
- atl1_set_mac_addr(hw);
- atlx_set_multi(netdev);
+ if (val && wufc) {
+ val = atl1_get_speed_and_duplex(hw, &speed, &duplex);
+ if (val) {
+ if (netif_msg_ifdown(adapter))
+ dev_printk(KERN_DEBUG, &pdev->dev,
+ "error getting speed/duplex\n");
+ goto disable_wol;
+ }
ctrl = 0;
- /* turn on magic packet wol */
+
+ /* enable magic packet WOL */
if (wufc & ATLX_WUFC_MAG)
- ctrl = WOL_MAGIC_EN | WOL_MAGIC_PME_EN;
-
- /* turn on Link change WOL */
- if (wufc & ATLX_WUFC_LNKC)
- ctrl |= (WOL_LINK_CHG_EN | WOL_LINK_CHG_PME_EN);
+ ctrl |= (WOL_MAGIC_EN | WOL_MAGIC_PME_EN);
iowrite32(ctrl, hw->hw_addr + REG_WOL_CTRL);
+ ioread32(hw->hw_addr + REG_WOL_CTRL);
- /* turn on all-multi mode if wake on multicast is enabled */
- ctrl = ioread32(hw->hw_addr + REG_MAC_CTRL);
- ctrl &= ~MAC_CTRL_DBG;
- ctrl &= ~MAC_CTRL_PROMIS_EN;
- if (wufc & ATLX_WUFC_MC)
- ctrl |= MAC_CTRL_MC_ALL_EN;
- else
- ctrl &= ~MAC_CTRL_MC_ALL_EN;
-
- /* turn on broadcast mode if wake on-BC is enabled */
- if (wufc & ATLX_WUFC_BC)
+ /* configure the mac */
+ ctrl = MAC_CTRL_RX_EN;
+ ctrl |= ((u32)((speed == SPEED_1000) ? MAC_CTRL_SPEED_1000 :
+ MAC_CTRL_SPEED_10_100) << MAC_CTRL_SPEED_SHIFT);
+ if (duplex == FULL_DUPLEX)
+ ctrl |= MAC_CTRL_DUPLX;
+ ctrl |= (((u32)adapter->hw.preamble_len &
+ MAC_CTRL_PRMLEN_MASK) << MAC_CTRL_PRMLEN_SHIFT);
+ if (adapter->vlgrp)
+ ctrl |= MAC_CTRL_RMV_VLAN;
+ if (wufc & ATLX_WUFC_MAG)
ctrl |= MAC_CTRL_BC_EN;
- else
- ctrl &= ~MAC_CTRL_BC_EN;
-
- /* enable RX */
- ctrl |= MAC_CTRL_RX_EN;
iowrite32(ctrl, hw->hw_addr + REG_MAC_CTRL);
- pci_enable_wake(pdev, PCI_D3hot, 1);
- pci_enable_wake(pdev, PCI_D3cold, 1);
- } else {
- iowrite32(0, hw->hw_addr + REG_WOL_CTRL);
- pci_enable_wake(pdev, PCI_D3hot, 0);
- pci_enable_wake(pdev, PCI_D3cold, 0);
+ ioread32(hw->hw_addr + REG_MAC_CTRL);
+
+ /* poke the PHY */
+ ctrl = ioread32(hw->hw_addr + REG_PCIE_PHYMISC);
+ ctrl |= PCIE_PHYMISC_FORCE_RCV_DET;
+ iowrite32(ctrl, hw->hw_addr + REG_PCIE_PHYMISC);
+ ioread32(hw->hw_addr + REG_PCIE_PHYMISC);
+
+ pci_enable_wake(pdev, pci_choose_state(pdev, state), 1);
+ goto exit;
}
- pci_save_state(pdev);
- pci_disable_device(pdev);
+ if (!val && wufc) {
+ ctrl |= (WOL_LINK_CHG_EN | WOL_LINK_CHG_PME_EN);
+ iowrite32(ctrl, hw->hw_addr + REG_WOL_CTRL);
+ ioread32(hw->hw_addr + REG_WOL_CTRL);
+ iowrite32(0, hw->hw_addr + REG_MAC_CTRL);
+ ioread32(hw->hw_addr + REG_MAC_CTRL);
+ hw->phy_configured = false;
+ pci_enable_wake(pdev, pci_choose_state(pdev, state), 1);
+ goto exit;
+ }
- pci_set_power_state(pdev, PCI_D3hot);
+disable_wol:
+ iowrite32(0, hw->hw_addr + REG_WOL_CTRL);
+ ioread32(hw->hw_addr + REG_WOL_CTRL);
+ ctrl = ioread32(hw->hw_addr + REG_PCIE_PHYMISC);
+ ctrl |= PCIE_PHYMISC_FORCE_RCV_DET;
+ iowrite32(ctrl, hw->hw_addr + REG_PCIE_PHYMISC);
+ ioread32(hw->hw_addr + REG_PCIE_PHYMISC);
+ hw->phy_configured = false;
+ pci_enable_wake(pdev, pci_choose_state(pdev, state), 0);
+exit:
+ if (netif_running(netdev))
+ pci_disable_msi(adapter->pdev);
+ pci_disable_device(pdev);
+ pci_set_power_state(pdev, pci_choose_state(pdev, state));
return 0;
}
@@ -2855,20 +2864,26 @@
pci_set_power_state(pdev, PCI_D0);
pci_restore_state(pdev);
- /* FIXME: check and handle */
err = pci_enable_device(pdev);
+ if (err) {
+ if (netif_msg_ifup(adapter))
+ dev_printk(KERN_DEBUG, &pdev->dev,
+ "error enabling pci device\n");
+ return err;
+ }
+
+ pci_set_master(pdev);
+ iowrite32(0, adapter->hw.hw_addr + REG_WOL_CTRL);
pci_enable_wake(pdev, PCI_D3hot, 0);
pci_enable_wake(pdev, PCI_D3cold, 0);
- iowrite32(0, adapter->hw.hw_addr + REG_WOL_CTRL);
- atl1_reset(adapter);
+ atl1_reset_hw(&adapter->hw);
+ adapter->cmb.cmb->int_stats = 0;
if (netif_running(netdev))
atl1_up(adapter);
netif_device_attach(netdev);
- atl1_via_workaround(adapter);
-
return 0;
}
#else
@@ -2876,6 +2891,13 @@
#define atl1_resume NULL
#endif
+static void atl1_shutdown(struct pci_dev *pdev)
+{
+#ifdef CONFIG_PM
+ atl1_suspend(pdev, PMSG_SUSPEND);
+#endif
+}
+
#ifdef CONFIG_NET_POLL_CONTROLLER
static void atl1_poll_controller(struct net_device *netdev)
{
@@ -3122,7 +3144,8 @@
.probe = atl1_probe,
.remove = __devexit_p(atl1_remove),
.suspend = atl1_suspend,
- .resume = atl1_resume
+ .resume = atl1_resume,
+ .shutdown = atl1_shutdown
};
/*
diff --git a/drivers/net/atlx/atl1.h b/drivers/net/atlx/atl1.h
index 51893d6..a5015b1 100644
--- a/drivers/net/atlx/atl1.h
+++ b/drivers/net/atlx/atl1.h
@@ -1,7 +1,7 @@
/*
* Copyright(c) 2005 - 2006 Attansic Corporation. All rights reserved.
* Copyright(c) 2006 - 2007 Chris Snook <csnook@redhat.com>
- * Copyright(c) 2006 Jay Cliburn <jcliburn@gmail.com>
+ * Copyright(c) 2006 - 2008 Jay Cliburn <jcliburn@gmail.com>
*
* Derived from Intel e1000 driver
* Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
diff --git a/drivers/net/atlx/atlx.c b/drivers/net/atlx/atlx.c
index f06b854..b3e7fcf 100644
--- a/drivers/net/atlx/atlx.c
+++ b/drivers/net/atlx/atlx.c
@@ -2,7 +2,7 @@
*
* Copyright(c) 2005 - 2006 Attansic Corporation. All rights reserved.
* Copyright(c) 2006 - 2007 Chris Snook <csnook@redhat.com>
- * Copyright(c) 2006 Jay Cliburn <jcliburn@gmail.com>
+ * Copyright(c) 2006 - 2008 Jay Cliburn <jcliburn@gmail.com>
* Copyright(c) 2007 Atheros Corporation. All rights reserved.
*
* Derived from Intel e1000 driver
diff --git a/drivers/net/atlx/atlx.h b/drivers/net/atlx/atlx.h
index 3be7c09..297a03d 100644
--- a/drivers/net/atlx/atlx.h
+++ b/drivers/net/atlx/atlx.h
@@ -2,7 +2,7 @@
*
* Copyright(c) 2005 - 2006 Attansic Corporation. All rights reserved.
* Copyright(c) 2006 - 2007 Chris Snook <csnook@redhat.com>
- * Copyright(c) 2006 Jay Cliburn <jcliburn@gmail.com>
+ * Copyright(c) 2006 - 2008 Jay Cliburn <jcliburn@gmail.com>
* Copyright(c) 2007 Atheros Corporation. All rights reserved.
*
* Derived from Intel e1000 driver
@@ -29,7 +29,7 @@
#include <linux/module.h>
#include <linux/types.h>
-#define ATLX_DRIVER_VERSION "2.1.1"
+#define ATLX_DRIVER_VERSION "2.1.3"
MODULE_AUTHOR("Xiong Huang <xiong.huang@atheros.com>, \
Chris Snook <csnook@redhat.com>, Jay Cliburn <jcliburn@gmail.com>");
MODULE_LICENSE("GPL");
@@ -460,6 +460,9 @@
#define MII_ATLX_PSSR_100MBS 0x4000 /* 01=100Mbs */
#define MII_ATLX_PSSR_1000MBS 0x8000 /* 10=1000Mbs */
+#define MII_DBG_ADDR 0x1D
+#define MII_DBG_DATA 0x1E
+
/* PCI Command Register Bit Definitions */
#define PCI_REG_COMMAND 0x04 /* PCI Command Register */
#define CMD_IO_SPACE 0x0001
diff --git a/drivers/net/au1000_eth.c b/drivers/net/au1000_eth.c
index 3634b5f..7023d77 100644
--- a/drivers/net/au1000_eth.c
+++ b/drivers/net/au1000_eth.c
@@ -1239,12 +1239,7 @@
*/
static irqreturn_t au1000_interrupt(int irq, void *dev_id)
{
- struct net_device *dev = (struct net_device *) dev_id;
-
- if (dev == NULL) {
- printk(KERN_ERR "%s: isr: null dev ptr\n", dev->name);
- return IRQ_RETVAL(1);
- }
+ struct net_device *dev = dev_id;
/* Handle RX interrupts first to minimize chance of overrun */
diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c
index 89c0018..4144343 100644
--- a/drivers/net/bfin_mac.c
+++ b/drivers/net/bfin_mac.c
@@ -22,7 +22,6 @@
#include <linux/crc32.h>
#include <linux/device.h>
#include <linux/spinlock.h>
-#include <linux/ethtool.h>
#include <linux/mii.h>
#include <linux/phy.h>
#include <linux/netdevice.h>
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index 4b46e68..367b6d4 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -5724,14 +5724,12 @@
if (!netif_running(bp->dev))
return;
- bp->in_reset_task = 1;
bnx2_netif_stop(bp);
bnx2_init_nic(bp);
atomic_set(&bp->intr_sem, 1);
bnx2_netif_start(bp);
- bp->in_reset_task = 0;
}
static void
@@ -5907,12 +5905,7 @@
struct bnx2 *bp = netdev_priv(dev);
u32 reset_code;
- /* Calling flush_scheduled_work() may deadlock because
- * linkwatch_event() may be on the workqueue and it will try to get
- * the rtnl_lock which we are holding.
- */
- while (bp->in_reset_task)
- msleep(1);
+ cancel_work_sync(&bp->reset_task);
bnx2_disable_int_sync(bp);
bnx2_napi_disable(bp);
diff --git a/drivers/net/bnx2.h b/drivers/net/bnx2.h
index 1eaf5bb..2377cc1 100644
--- a/drivers/net/bnx2.h
+++ b/drivers/net/bnx2.h
@@ -6656,7 +6656,6 @@
int current_interval;
struct timer_list timer;
struct work_struct reset_task;
- int in_reset_task;
/* Used to synchronize phy accesses. */
spinlock_t phy_lock;
diff --git a/drivers/net/bnx2x.c b/drivers/net/bnx2x.c
index 7bdb5af..70cba64 100644
--- a/drivers/net/bnx2x.c
+++ b/drivers/net/bnx2x.c
@@ -6,7 +6,8 @@
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation.
*
- * Written by: Eliezer Tamir <eliezert@broadcom.com>
+ * Maintained by: Eilon Greenstein <eilong@broadcom.com>
+ * Written by: Eliezer Tamir
* Based on code from Michael Chan's bnx2 driver
* UDP CSUM errata workaround by Arik Gendelman
* Slowpath rework by Vladislav Zolotarov
@@ -74,7 +75,7 @@
"Broadcom NetXtreme II 5771X 10Gigabit Ethernet Driver "
DRV_MODULE_NAME " " DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n";
-MODULE_AUTHOR("Eliezer Tamir <eliezert@broadcom.com>");
+MODULE_AUTHOR("Eliezer Tamir");
MODULE_DESCRIPTION("Broadcom NetXtreme II BCM57710 Driver");
MODULE_LICENSE("GPL");
MODULE_VERSION(DRV_MODULE_VERSION);
diff --git a/drivers/net/bnx2x.h b/drivers/net/bnx2x.h
index 4f0c0d3..8e68d06 100644
--- a/drivers/net/bnx2x.h
+++ b/drivers/net/bnx2x.h
@@ -6,7 +6,8 @@
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation.
*
- * Written by: Eliezer Tamir <eliezert@broadcom.com>
+ * Maintained by: Eilon Greenstein <eilong@broadcom.com>
+ * Written by: Eliezer Tamir
* Based on code from Michael Chan's bnx2 driver
*/
diff --git a/drivers/net/bnx2x_init.h b/drivers/net/bnx2x_init.h
index dcaecc5..370686e 100644
--- a/drivers/net/bnx2x_init.h
+++ b/drivers/net/bnx2x_init.h
@@ -6,7 +6,8 @@
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation.
*
- * Written by: Eliezer Tamir <eliezert@broadcom.com>
+ * Maintained by: Eilon Greenstein <eilong@broadcom.com>
+ * Written by: Eliezer Tamir
*/
#ifndef BNX2X_INIT_H
diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c
index 68c41a0..08f3d39 100644
--- a/drivers/net/bonding/bond_sysfs.c
+++ b/drivers/net/bonding/bond_sysfs.c
@@ -1437,8 +1437,16 @@
* configure multiple bonding devices.
*/
if (ret == -EEXIST) {
- netdev_class = NULL;
- return 0;
+ /* Is someone being kinky and naming a device bonding_master? */
+ if (__dev_get_by_name(&init_net,
+ class_attr_bonding_masters.attr.name))
+ printk(KERN_ERR
+ "network device named %s already exists in sysfs",
+ class_attr_bonding_masters.attr.name);
+ else {
+ netdev_class = NULL;
+ return 0;
+ }
}
return ret;
diff --git a/drivers/net/cassini.c b/drivers/net/cassini.c
index 93e1363..83768df 100644
--- a/drivers/net/cassini.c
+++ b/drivers/net/cassini.c
@@ -142,8 +142,8 @@
#define DRV_MODULE_NAME "cassini"
#define PFX DRV_MODULE_NAME ": "
-#define DRV_MODULE_VERSION "1.5"
-#define DRV_MODULE_RELDATE "4 Jan 2008"
+#define DRV_MODULE_VERSION "1.6"
+#define DRV_MODULE_RELDATE "21 May 2008"
#define CAS_DEF_MSG_ENABLE \
(NETIF_MSG_DRV | \
@@ -2136,9 +2136,12 @@
if (addr)
cas_page_unmap(addr);
}
- skb->csum = csum_unfold(~csum);
- skb->ip_summed = CHECKSUM_COMPLETE;
skb->protocol = eth_type_trans(skb, cp->dev);
+ if (skb->protocol == htons(ETH_P_IP)) {
+ skb->csum = csum_unfold(~csum);
+ skb->ip_summed = CHECKSUM_COMPLETE;
+ } else
+ skb->ip_summed = CHECKSUM_NONE;
return len;
}
diff --git a/drivers/net/cpmac.c b/drivers/net/cpmac.c
index 2b5740b..7f3f62e 100644
--- a/drivers/net/cpmac.c
+++ b/drivers/net/cpmac.c
@@ -38,6 +38,7 @@
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <asm/gpio.h>
+#include <asm/atomic.h>
MODULE_AUTHOR("Eugene Konev <ejka@imfi.kspu.ru>");
MODULE_DESCRIPTION("TI AR7 ethernet driver (CPMAC)");
@@ -187,6 +188,7 @@
#define CPMAC_EOQ 0x1000
struct sk_buff *skb;
struct cpmac_desc *next;
+ struct cpmac_desc *prev;
dma_addr_t mapping;
dma_addr_t data_mapping;
};
@@ -208,6 +210,7 @@
struct work_struct reset_work;
struct platform_device *pdev;
struct napi_struct napi;
+ atomic_t reset_pending;
};
static irqreturn_t cpmac_irq(int, void *);
@@ -241,6 +244,16 @@
printk("\n");
}
+static void cpmac_dump_all_desc(struct net_device *dev)
+{
+ struct cpmac_priv *priv = netdev_priv(dev);
+ struct cpmac_desc *dump = priv->rx_head;
+ do {
+ cpmac_dump_desc(dev, dump);
+ dump = dump->next;
+ } while (dump != priv->rx_head);
+}
+
static void cpmac_dump_skb(struct net_device *dev, struct sk_buff *skb)
{
int i;
@@ -412,21 +425,42 @@
static int cpmac_poll(struct napi_struct *napi, int budget)
{
struct sk_buff *skb;
- struct cpmac_desc *desc;
- int received = 0;
+ struct cpmac_desc *desc, *restart;
struct cpmac_priv *priv = container_of(napi, struct cpmac_priv, napi);
+ int received = 0, processed = 0;
spin_lock(&priv->rx_lock);
if (unlikely(!priv->rx_head)) {
if (netif_msg_rx_err(priv) && net_ratelimit())
printk(KERN_WARNING "%s: rx: polling, but no queue\n",
priv->dev->name);
+ spin_unlock(&priv->rx_lock);
netif_rx_complete(priv->dev, napi);
return 0;
}
desc = priv->rx_head;
+ restart = NULL;
while (((desc->dataflags & CPMAC_OWN) == 0) && (received < budget)) {
+ processed++;
+
+ if ((desc->dataflags & CPMAC_EOQ) != 0) {
+ /* The last update to eoq->hw_next didn't happen
+ * soon enough, and the receiver stopped here.
+ *Remember this descriptor so we can restart
+ * the receiver after freeing some space.
+ */
+ if (unlikely(restart)) {
+ if (netif_msg_rx_err(priv))
+ printk(KERN_ERR "%s: poll found a"
+ " duplicate EOQ: %p and %p\n",
+ priv->dev->name, restart, desc);
+ goto fatal_error;
+ }
+
+ restart = desc->next;
+ }
+
skb = cpmac_rx_one(priv, desc);
if (likely(skb)) {
netif_receive_skb(skb);
@@ -435,19 +469,90 @@
desc = desc->next;
}
+ if (desc != priv->rx_head) {
+ /* We freed some buffers, but not the whole ring,
+ * add what we did free to the rx list */
+ desc->prev->hw_next = (u32)0;
+ priv->rx_head->prev->hw_next = priv->rx_head->mapping;
+ }
+
+ /* Optimization: If we did not actually process an EOQ (perhaps because
+ * of quota limits), check to see if the tail of the queue has EOQ set.
+ * We should immediately restart in that case so that the receiver can
+ * restart and run in parallel with more packet processing.
+ * This lets us handle slightly larger bursts before running
+ * out of ring space (assuming dev->weight < ring_size) */
+
+ if (!restart &&
+ (priv->rx_head->prev->dataflags & (CPMAC_OWN|CPMAC_EOQ))
+ == CPMAC_EOQ &&
+ (priv->rx_head->dataflags & CPMAC_OWN) != 0) {
+ /* reset EOQ so the poll loop (above) doesn't try to
+ * restart this when it eventually gets to this descriptor.
+ */
+ priv->rx_head->prev->dataflags &= ~CPMAC_EOQ;
+ restart = priv->rx_head;
+ }
+
+ if (restart) {
+ priv->dev->stats.rx_errors++;
+ priv->dev->stats.rx_fifo_errors++;
+ if (netif_msg_rx_err(priv) && net_ratelimit())
+ printk(KERN_WARNING "%s: rx dma ring overrun\n",
+ priv->dev->name);
+
+ if (unlikely((restart->dataflags & CPMAC_OWN) == 0)) {
+ if (netif_msg_drv(priv))
+ printk(KERN_ERR "%s: cpmac_poll is trying to "
+ "restart rx from a descriptor that's "
+ "not free: %p\n",
+ priv->dev->name, restart);
+ goto fatal_error;
+ }
+
+ cpmac_write(priv->regs, CPMAC_RX_PTR(0), restart->mapping);
+ }
+
priv->rx_head = desc;
spin_unlock(&priv->rx_lock);
if (unlikely(netif_msg_rx_status(priv)))
printk(KERN_DEBUG "%s: poll processed %d packets\n",
priv->dev->name, received);
- if (desc->dataflags & CPMAC_OWN) {
+ if (processed == 0) {
+ /* we ran out of packets to read,
+ * revert to interrupt-driven mode */
netif_rx_complete(priv->dev, napi);
- cpmac_write(priv->regs, CPMAC_RX_PTR(0), (u32)desc->mapping);
cpmac_write(priv->regs, CPMAC_RX_INT_ENABLE, 1);
return 0;
}
return 1;
+
+fatal_error:
+ /* Something went horribly wrong.
+ * Reset hardware to try to recover rather than wedging. */
+
+ if (netif_msg_drv(priv)) {
+ printk(KERN_ERR "%s: cpmac_poll is confused. "
+ "Resetting hardware\n", priv->dev->name);
+ cpmac_dump_all_desc(priv->dev);
+ printk(KERN_DEBUG "%s: RX_PTR(0)=0x%08x RX_ACK(0)=0x%08x\n",
+ priv->dev->name,
+ cpmac_read(priv->regs, CPMAC_RX_PTR(0)),
+ cpmac_read(priv->regs, CPMAC_RX_ACK(0)));
+ }
+
+ spin_unlock(&priv->rx_lock);
+ netif_rx_complete(priv->dev, napi);
+ netif_stop_queue(priv->dev);
+ napi_disable(&priv->napi);
+
+ atomic_inc(&priv->reset_pending);
+ cpmac_hw_stop(priv->dev);
+ if (!schedule_work(&priv->reset_work))
+ atomic_dec(&priv->reset_pending);
+ return 0;
+
}
static int cpmac_start_xmit(struct sk_buff *skb, struct net_device *dev)
@@ -456,6 +561,9 @@
struct cpmac_desc *desc;
struct cpmac_priv *priv = netdev_priv(dev);
+ if (unlikely(atomic_read(&priv->reset_pending)))
+ return NETDEV_TX_BUSY;
+
if (unlikely(skb_padto(skb, ETH_ZLEN)))
return NETDEV_TX_OK;
@@ -621,8 +729,10 @@
desc->dataflags = CPMAC_OWN;
dev->stats.rx_dropped++;
}
+ desc->hw_next = desc->next->mapping;
desc = desc->next;
}
+ priv->rx_head->prev->hw_next = 0;
}
static void cpmac_clear_tx(struct net_device *dev)
@@ -635,14 +745,14 @@
priv->desc_ring[i].dataflags = 0;
if (priv->desc_ring[i].skb) {
dev_kfree_skb_any(priv->desc_ring[i].skb);
- if (netif_subqueue_stopped(dev, i))
- netif_wake_subqueue(dev, i);
+ priv->desc_ring[i].skb = NULL;
}
}
}
static void cpmac_hw_error(struct work_struct *work)
{
+ int i;
struct cpmac_priv *priv =
container_of(work, struct cpmac_priv, reset_work);
@@ -651,8 +761,48 @@
spin_unlock(&priv->rx_lock);
cpmac_clear_tx(priv->dev);
cpmac_hw_start(priv->dev);
- napi_enable(&priv->napi);
- netif_start_queue(priv->dev);
+ barrier();
+ atomic_dec(&priv->reset_pending);
+
+ for (i = 0; i < CPMAC_QUEUES; i++)
+ netif_wake_subqueue(priv->dev, i);
+ netif_wake_queue(priv->dev);
+ cpmac_write(priv->regs, CPMAC_MAC_INT_ENABLE, 3);
+}
+
+static void cpmac_check_status(struct net_device *dev)
+{
+ struct cpmac_priv *priv = netdev_priv(dev);
+
+ u32 macstatus = cpmac_read(priv->regs, CPMAC_MAC_STATUS);
+ int rx_channel = (macstatus >> 8) & 7;
+ int rx_code = (macstatus >> 12) & 15;
+ int tx_channel = (macstatus >> 16) & 7;
+ int tx_code = (macstatus >> 20) & 15;
+
+ if (rx_code || tx_code) {
+ if (netif_msg_drv(priv) && net_ratelimit()) {
+ /* Can't find any documentation on what these
+ *error codes actually are. So just log them and hope..
+ */
+ if (rx_code)
+ printk(KERN_WARNING "%s: host error %d on rx "
+ "channel %d (macstatus %08x), resetting\n",
+ dev->name, rx_code, rx_channel, macstatus);
+ if (tx_code)
+ printk(KERN_WARNING "%s: host error %d on tx "
+ "channel %d (macstatus %08x), resetting\n",
+ dev->name, tx_code, tx_channel, macstatus);
+ }
+
+ netif_stop_queue(dev);
+ cpmac_hw_stop(dev);
+ if (schedule_work(&priv->reset_work))
+ atomic_inc(&priv->reset_pending);
+ if (unlikely(netif_msg_hw(priv)))
+ cpmac_dump_regs(dev);
+ }
+ cpmac_write(priv->regs, CPMAC_MAC_INT_CLEAR, 0xff);
}
static irqreturn_t cpmac_irq(int irq, void *dev_id)
@@ -683,49 +833,32 @@
cpmac_write(priv->regs, CPMAC_MAC_EOI_VECTOR, 0);
- if (unlikely(status & (MAC_INT_HOST | MAC_INT_STATUS))) {
- if (netif_msg_drv(priv) && net_ratelimit())
- printk(KERN_ERR "%s: hw error, resetting...\n",
- dev->name);
- netif_stop_queue(dev);
- napi_disable(&priv->napi);
- cpmac_hw_stop(dev);
- schedule_work(&priv->reset_work);
- if (unlikely(netif_msg_hw(priv)))
- cpmac_dump_regs(dev);
- }
+ if (unlikely(status & (MAC_INT_HOST | MAC_INT_STATUS)))
+ cpmac_check_status(dev);
return IRQ_HANDLED;
}
static void cpmac_tx_timeout(struct net_device *dev)
{
- struct cpmac_priv *priv = netdev_priv(dev);
int i;
+ struct cpmac_priv *priv = netdev_priv(dev);
spin_lock(&priv->lock);
dev->stats.tx_errors++;
spin_unlock(&priv->lock);
if (netif_msg_tx_err(priv) && net_ratelimit())
printk(KERN_WARNING "%s: transmit timeout\n", dev->name);
- /*
- * FIXME: waking up random queue is not the best thing to
- * do... on the other hand why we got here at all?
- */
-#ifdef CONFIG_NETDEVICES_MULTIQUEUE
+
+ atomic_inc(&priv->reset_pending);
+ barrier();
+ cpmac_clear_tx(dev);
+ barrier();
+ atomic_dec(&priv->reset_pending);
+
+ netif_wake_queue(priv->dev);
for (i = 0; i < CPMAC_QUEUES; i++)
- if (priv->desc_ring[i].skb) {
- priv->desc_ring[i].dataflags = 0;
- dev_kfree_skb_any(priv->desc_ring[i].skb);
- netif_wake_subqueue(dev, i);
- break;
- }
-#else
- priv->desc_ring[0].dataflags = 0;
- if (priv->desc_ring[0].skb)
- dev_kfree_skb_any(priv->desc_ring[0].skb);
- netif_wake_queue(dev);
-#endif
+ netif_wake_subqueue(dev, i);
}
static int cpmac_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
@@ -901,9 +1034,12 @@
desc->buflen = CPMAC_SKB_SIZE;
desc->dataflags = CPMAC_OWN;
desc->next = &priv->rx_head[(i + 1) % priv->ring_size];
+ desc->next->prev = desc;
desc->hw_next = (u32)desc->next->mapping;
}
+ priv->rx_head->prev->hw_next = (u32)0;
+
if ((res = request_irq(dev->irq, cpmac_irq, IRQF_SHARED,
dev->name, dev))) {
if (netif_msg_drv(priv))
@@ -912,6 +1048,7 @@
goto fail_irq;
}
+ atomic_set(&priv->reset_pending, 0);
INIT_WORK(&priv->reset_work, cpmac_hw_error);
cpmac_hw_start(dev);
@@ -1007,21 +1144,10 @@
if (phy_id == PHY_MAX_ADDR) {
if (external_switch || dumb_switch) {
- struct fixed_phy_status status = {};
-
- /*
- * FIXME: this should be in the platform code!
- * Since there is not platform code at all (that is,
- * no mainline users of that driver), place it here
- * for now.
- */
- phy_id = 0;
- status.link = 1;
- status.duplex = 1;
- status.speed = 100;
- fixed_phy_add(PHY_POLL, phy_id, &status);
+ mdio_bus_id = 0; /* fixed phys bus */
+ phy_id = pdev->id;
} else {
- printk(KERN_ERR "cpmac: no PHY present\n");
+ dev_err(&pdev->dev, "no PHY present\n");
return -ENODEV;
}
}
@@ -1064,10 +1190,8 @@
priv->msg_enable = netif_msg_init(debug_level, 0xff);
memcpy(dev->dev_addr, pdata->dev_addr, sizeof(dev->dev_addr));
- snprintf(priv->phy_name, BUS_ID_SIZE, PHY_ID_FMT, mdio_bus_id, phy_id);
-
- priv->phy = phy_connect(dev, priv->phy_name, &cpmac_adjust_link, 0,
- PHY_INTERFACE_MODE_MII);
+ priv->phy = phy_connect(dev, cpmac_mii.phy_map[phy_id]->dev.bus_id,
+ &cpmac_adjust_link, 0, PHY_INTERFACE_MODE_MII);
if (IS_ERR(priv->phy)) {
if (netif_msg_drv(priv))
printk(KERN_ERR "%s: Could not attach to PHY\n",
diff --git a/drivers/net/cs89x0.c b/drivers/net/cs89x0.c
index 348371f..fba87ab 100644
--- a/drivers/net/cs89x0.c
+++ b/drivers/net/cs89x0.c
@@ -1394,7 +1394,11 @@
#endif
if (!result) {
printk(KERN_ERR "%s: EEPROM is configured for unavailable media\n", dev->name);
- release_irq:
+release_dma:
+#if ALLOW_DMA
+ free_dma(dev->dma);
+#endif
+release_irq:
#if ALLOW_DMA
release_dma_buff(lp);
#endif
@@ -1442,12 +1446,12 @@
if ((result = detect_bnc(dev)) != DETECTED_NONE)
break;
printk(KERN_ERR "%s: no media detected\n", dev->name);
- goto release_irq;
+ goto release_dma;
}
switch(result) {
case DETECTED_NONE:
printk(KERN_ERR "%s: no network cable attached to configured media\n", dev->name);
- goto release_irq;
+ goto release_dma;
case DETECTED_RJ45H:
printk(KERN_INFO "%s: using half-duplex 10Base-T (RJ-45)\n", dev->name);
break;
diff --git a/drivers/net/cxgb3/adapter.h b/drivers/net/cxgb3/adapter.h
index 4fdb13f..acebe43 100644
--- a/drivers/net/cxgb3/adapter.h
+++ b/drivers/net/cxgb3/adapter.h
@@ -71,6 +71,7 @@
USING_MSIX = (1 << 2),
QUEUES_BOUND = (1 << 3),
TP_PARITY_INIT = (1 << 4),
+ NAPI_INIT = (1 << 5),
};
struct fl_pg_chunk {
diff --git a/drivers/net/cxgb3/common.h b/drivers/net/cxgb3/common.h
index 91ee727..579bee4 100644
--- a/drivers/net/cxgb3/common.h
+++ b/drivers/net/cxgb3/common.h
@@ -698,6 +698,7 @@
void early_hw_init(struct adapter *adapter, const struct adapter_info *ai);
int t3_prep_adapter(struct adapter *adapter, const struct adapter_info *ai,
int reset);
+int t3_replay_prep_adapter(struct adapter *adapter);
void t3_led_ready(struct adapter *adapter);
void t3_fatal_err(struct adapter *adapter);
void t3_set_vlan_accel(struct adapter *adapter, unsigned int ports, int on);
diff --git a/drivers/net/cxgb3/cxgb3_main.c b/drivers/net/cxgb3/cxgb3_main.c
index ce949d5..3a31272 100644
--- a/drivers/net/cxgb3/cxgb3_main.c
+++ b/drivers/net/cxgb3/cxgb3_main.c
@@ -421,6 +421,13 @@
netif_napi_add(qs->netdev, &qs->napi, qs->napi.poll,
64);
}
+
+ /*
+ * netif_napi_add() can be called only once per napi_struct because it
+ * adds each new napi_struct to a list. Be careful not to call it a
+ * second time, e.g., during EEH recovery, by making a note of it.
+ */
+ adap->flags |= NAPI_INIT;
}
/*
@@ -896,7 +903,8 @@
goto out;
setup_rss(adap);
- init_napi(adap);
+ if (!(adap->flags & NAPI_INIT))
+ init_napi(adap);
adap->flags |= FULL_INIT_DONE;
}
@@ -999,7 +1007,7 @@
return 0;
if (!adap_up && (err = cxgb_up(adapter)) < 0)
- return err;
+ goto out;
t3_tp_set_offload_mode(adapter, 1);
tdev->lldev = adapter->port[0];
@@ -1061,10 +1069,8 @@
int other_ports = adapter->open_device_map & PORT_MASK;
int err;
- if (!adapter->open_device_map && (err = cxgb_up(adapter)) < 0) {
- quiesce_rx(adapter);
+ if (!adapter->open_device_map && (err = cxgb_up(adapter)) < 0)
return err;
- }
set_bit(pi->port_id, &adapter->open_device_map);
if (is_offload(adapter) && !ofld_disable) {
@@ -2424,14 +2430,11 @@
test_bit(OFFLOAD_DEVMAP_BIT, &adapter->open_device_map))
offload_close(&adapter->tdev);
- /* Free sge resources */
- t3_free_sge_resources(adapter);
-
adapter->flags &= ~FULL_INIT_DONE;
pci_disable_device(pdev);
- /* Request a slot slot reset. */
+ /* Request a slot reset. */
return PCI_ERS_RESULT_NEED_RESET;
}
@@ -2448,13 +2451,20 @@
if (pci_enable_device(pdev)) {
dev_err(&pdev->dev,
"Cannot re-enable PCI device after reset.\n");
- return PCI_ERS_RESULT_DISCONNECT;
+ goto err;
}
pci_set_master(pdev);
+ pci_restore_state(pdev);
- t3_prep_adapter(adapter, adapter->params.info, 1);
+ /* Free sge resources */
+ t3_free_sge_resources(adapter);
+
+ if (t3_replay_prep_adapter(adapter))
+ goto err;
return PCI_ERS_RESULT_RECOVERED;
+err:
+ return PCI_ERS_RESULT_DISCONNECT;
}
/**
@@ -2483,13 +2493,6 @@
netif_device_attach(netdev);
}
}
-
- if (is_offload(adapter)) {
- __set_bit(OFFLOAD_DEVMAP_BIT, &adapter->registered_device_map);
- if (offload_open(adapter->port[0]))
- printk(KERN_WARNING
- "Could not bring back offload capabilities\n");
- }
}
static struct pci_error_handlers t3_err_handler = {
@@ -2608,6 +2611,7 @@
}
pci_set_master(pdev);
+ pci_save_state(pdev);
mmio_start = pci_resource_start(pdev, 0);
mmio_len = pci_resource_len(pdev, 0);
diff --git a/drivers/net/cxgb3/regs.h b/drivers/net/cxgb3/regs.h
index 02dbbb3..5671788 100644
--- a/drivers/net/cxgb3/regs.h
+++ b/drivers/net/cxgb3/regs.h
@@ -444,6 +444,14 @@
#define A_PCIE_CFG 0x88
+#define S_ENABLELINKDWNDRST 21
+#define V_ENABLELINKDWNDRST(x) ((x) << S_ENABLELINKDWNDRST)
+#define F_ENABLELINKDWNDRST V_ENABLELINKDWNDRST(1U)
+
+#define S_ENABLELINKDOWNRST 20
+#define V_ENABLELINKDOWNRST(x) ((x) << S_ENABLELINKDOWNRST)
+#define F_ENABLELINKDOWNRST V_ENABLELINKDOWNRST(1U)
+
#define S_PCIE_CLIDECEN 16
#define V_PCIE_CLIDECEN(x) ((x) << S_PCIE_CLIDECEN)
#define F_PCIE_CLIDECEN V_PCIE_CLIDECEN(1U)
diff --git a/drivers/net/cxgb3/sge.c b/drivers/net/cxgb3/sge.c
index 98a6bbd..796eb30 100644
--- a/drivers/net/cxgb3/sge.c
+++ b/drivers/net/cxgb3/sge.c
@@ -539,6 +539,31 @@
}
/**
+ * t3_reset_qset - reset a sge qset
+ * @q: the queue set
+ *
+ * Reset the qset structure.
+ * the NAPI structure is preserved in the event of
+ * the qset's reincarnation, for example during EEH recovery.
+ */
+static void t3_reset_qset(struct sge_qset *q)
+{
+ if (q->adap &&
+ !(q->adap->flags & NAPI_INIT)) {
+ memset(q, 0, sizeof(*q));
+ return;
+ }
+
+ q->adap = NULL;
+ memset(&q->rspq, 0, sizeof(q->rspq));
+ memset(q->fl, 0, sizeof(struct sge_fl) * SGE_RXQ_PER_SET);
+ memset(q->txq, 0, sizeof(struct sge_txq) * SGE_TXQ_PER_SET);
+ q->txq_stopped = 0;
+ memset(&q->tx_reclaim_timer, 0, sizeof(q->tx_reclaim_timer));
+}
+
+
+/**
* free_qset - free the resources of an SGE queue set
* @adapter: the adapter owning the queue set
* @q: the queue set
@@ -594,7 +619,7 @@
q->rspq.desc, q->rspq.phys_addr);
}
- memset(q, 0, sizeof(*q));
+ t3_reset_qset(q);
}
/**
@@ -1365,7 +1390,7 @@
*/
int t3_mgmt_tx(struct adapter *adap, struct sk_buff *skb)
{
- int ret;
+ int ret;
local_bh_disable();
ret = ctrl_xmit(adap, &adap->sge.qs[0].txq[TXQ_CTRL], skb);
local_bh_enable();
diff --git a/drivers/net/cxgb3/t3_hw.c b/drivers/net/cxgb3/t3_hw.c
index a99496a..d405a93 100644
--- a/drivers/net/cxgb3/t3_hw.c
+++ b/drivers/net/cxgb3/t3_hw.c
@@ -3264,6 +3264,7 @@
t3_write_reg(adap, A_PCIE_PEX_ERR, 0xffffffff);
t3_set_reg_field(adap, A_PCIE_CFG, 0,
+ F_ENABLELINKDWNDRST | F_ENABLELINKDOWNRST |
F_PCIE_DMASTOPEN | F_PCIE_CLIDECEN);
}
@@ -3655,3 +3656,30 @@
t3_set_reg_field(adapter, A_T3DBG_GPIO_EN, F_GPIO0_OUT_VAL,
F_GPIO0_OUT_VAL);
}
+
+int t3_replay_prep_adapter(struct adapter *adapter)
+{
+ const struct adapter_info *ai = adapter->params.info;
+ unsigned int i, j = 0;
+ int ret;
+
+ early_hw_init(adapter, ai);
+ ret = init_parity(adapter);
+ if (ret)
+ return ret;
+
+ for_each_port(adapter, i) {
+ struct port_info *p = adap2pinfo(adapter, i);
+ while (!adapter->params.vpd.port_type[j])
+ ++j;
+
+ p->port_type->phy_prep(&p->phy, adapter, ai->phy_base_addr + j,
+ ai->mdio_ops);
+
+ p->phy.ops->power_down(&p->phy, 1);
+ ++j;
+ }
+
+return 0;
+}
+
diff --git a/drivers/net/dm9000.c b/drivers/net/dm9000.c
index e6fe261..864295e 100644
--- a/drivers/net/dm9000.c
+++ b/drivers/net/dm9000.c
@@ -117,6 +117,9 @@
struct mutex addr_lock; /* phy and eeprom access lock */
+ struct delayed_work phy_poll;
+ struct net_device *ndev;
+
spinlock_t lock;
struct mii_if_info mii;
@@ -297,6 +300,10 @@
}
}
+static void dm9000_schedule_poll(board_info_t *db)
+{
+ schedule_delayed_work(&db->phy_poll, HZ * 2);
+}
/* Our watchdog timed out. Called by the networking layer */
static void dm9000_timeout(struct net_device *dev)
@@ -465,6 +472,17 @@
.set_eeprom = dm9000_set_eeprom,
};
+static void
+dm9000_poll_work(struct work_struct *w)
+{
+ struct delayed_work *dw = container_of(w, struct delayed_work, work);
+ board_info_t *db = container_of(dw, board_info_t, phy_poll);
+
+ mii_check_media(&db->mii, netif_msg_link(db), 0);
+
+ if (netif_running(db->ndev))
+ dm9000_schedule_poll(db);
+}
/* dm9000_release_board
*
@@ -503,7 +521,7 @@
/*
* Search DM9000 board, allocate space and register it
*/
-static int
+static int __devinit
dm9000_probe(struct platform_device *pdev)
{
struct dm9000_plat_data *pdata = pdev->dev.platform_data;
@@ -525,17 +543,21 @@
SET_NETDEV_DEV(ndev, &pdev->dev);
- dev_dbg(&pdev->dev, "dm9000_probe()");
+ dev_dbg(&pdev->dev, "dm9000_probe()\n");
/* setup board info structure */
db = (struct board_info *) ndev->priv;
memset(db, 0, sizeof (*db));
db->dev = &pdev->dev;
+ db->ndev = ndev;
spin_lock_init(&db->lock);
mutex_init(&db->addr_lock);
+ INIT_DELAYED_WORK(&db->phy_poll, dm9000_poll_work);
+
+
if (pdev->num_resources < 2) {
ret = -ENODEV;
goto out;
@@ -761,6 +783,8 @@
mii_check_media(&db->mii, netif_msg_link(db), 1);
netif_start_queue(dev);
+
+ dm9000_schedule_poll(db);
return 0;
}
@@ -879,6 +903,8 @@
if (netif_msg_ifdown(db))
dev_dbg(db->dev, "shutting down %s\n", ndev->name);
+ cancel_delayed_work_sync(&db->phy_poll);
+
netif_stop_queue(ndev);
netif_carrier_off(ndev);
@@ -1288,6 +1314,8 @@
spin_unlock_irqrestore(&db->lock,flags);
mutex_unlock(&db->addr_lock);
+
+ dm9000_dbg(db, 5, "phy_read[%02x] -> %04x\n", reg, ret);
return ret;
}
@@ -1301,6 +1329,7 @@
unsigned long flags;
unsigned long reg_save;
+ dm9000_dbg(db, 5, "phy_write[%02x] = %04x\n", reg, value);
mutex_lock(&db->addr_lock);
spin_lock_irqsave(&db->lock,flags);
@@ -1372,7 +1401,7 @@
return 0;
}
-static int
+static int __devexit
dm9000_drv_remove(struct platform_device *pdev)
{
struct net_device *ndev = platform_get_drvdata(pdev);
@@ -1393,7 +1422,7 @@
.owner = THIS_MODULE,
},
.probe = dm9000_probe,
- .remove = dm9000_drv_remove,
+ .remove = __devexit_p(dm9000_drv_remove),
.suspend = dm9000_drv_suspend,
.resume = dm9000_drv_resume,
};
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c
index 8cbb40f..cab1835 100644
--- a/drivers/net/e1000e/netdev.c
+++ b/drivers/net/e1000e/netdev.c
@@ -4201,8 +4201,8 @@
struct e1000_adapter *adapter;
struct e1000_hw *hw;
const struct e1000_info *ei = e1000_info_tbl[ent->driver_data];
- unsigned long mmio_start, mmio_len;
- unsigned long flash_start, flash_len;
+ resource_size_t mmio_start, mmio_len;
+ resource_size_t flash_start, flash_len;
static int cards_found;
int i, err, pci_using_dac;
diff --git a/drivers/net/ehea/ehea.h b/drivers/net/ehea/ehea.h
index f5dacce..fe872fb 100644
--- a/drivers/net/ehea/ehea.h
+++ b/drivers/net/ehea/ehea.h
@@ -40,7 +40,7 @@
#include <asm/io.h>
#define DRV_NAME "ehea"
-#define DRV_VERSION "EHEA_0090"
+#define DRV_VERSION "EHEA_0091"
/* eHEA capability flags */
#define DLPAR_PORT_ADD_REM 1
@@ -118,6 +118,13 @@
#define EHEA_MR_ACC_CTRL 0x00800000
#define EHEA_BUSMAP_START 0x8000000000000000ULL
+#define EHEA_INVAL_ADDR 0xFFFFFFFFFFFFFFFFULL
+#define EHEA_DIR_INDEX_SHIFT 13 /* 8k Entries in 64k block */
+#define EHEA_TOP_INDEX_SHIFT (EHEA_DIR_INDEX_SHIFT * 2)
+#define EHEA_MAP_ENTRIES (1 << EHEA_DIR_INDEX_SHIFT)
+#define EHEA_MAP_SIZE (0x10000) /* currently fixed map size */
+#define EHEA_INDEX_MASK (EHEA_MAP_ENTRIES - 1)
+
#define EHEA_WATCH_DOG_TIMEOUT 10*HZ
@@ -192,10 +199,20 @@
set to 0 if unused */
};
-struct ehea_busmap {
- unsigned int entries; /* total number of entries */
- unsigned int valid_sections; /* number of valid sections */
- u64 *vaddr;
+/*
+ * Memory map data structures
+ */
+struct ehea_dir_bmap
+{
+ u64 ent[EHEA_MAP_ENTRIES];
+};
+struct ehea_top_bmap
+{
+ struct ehea_dir_bmap *dir[EHEA_MAP_ENTRIES];
+};
+struct ehea_bmap
+{
+ struct ehea_top_bmap *top[EHEA_MAP_ENTRIES];
};
struct ehea_qp;
diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c
index f9bc21c..075fd54 100644
--- a/drivers/net/ehea/ehea_main.c
+++ b/drivers/net/ehea/ehea_main.c
@@ -35,6 +35,7 @@
#include <linux/if_ether.h>
#include <linux/notifier.h>
#include <linux/reboot.h>
+#include <linux/memory.h>
#include <asm/kexec.h>
#include <linux/mutex.h>
@@ -1765,16 +1766,20 @@
mutex_lock(&ehea_bcmc_regs.lock);
/* Deregister old MAC in pHYP */
- ret = ehea_broadcast_reg_helper(port, H_DEREG_BCMC);
- if (ret)
- goto out_upregs;
+ if (port->state == EHEA_PORT_UP) {
+ ret = ehea_broadcast_reg_helper(port, H_DEREG_BCMC);
+ if (ret)
+ goto out_upregs;
+ }
port->mac_addr = cb0->port_mac_addr << 16;
/* Register new MAC in pHYP */
- ret = ehea_broadcast_reg_helper(port, H_REG_BCMC);
- if (ret)
- goto out_upregs;
+ if (port->state == EHEA_PORT_UP) {
+ ret = ehea_broadcast_reg_helper(port, H_REG_BCMC);
+ if (ret)
+ goto out_upregs;
+ }
ret = 0;
@@ -2212,8 +2217,6 @@
goto out;
}
- memset(cb1->vlan_filter, 0, sizeof(cb1->vlan_filter));
-
hret = ehea_h_modify_ehea_port(adapter->handle, port->logical_port_id,
H_PORT_CB1, H_PORT_CB1_ALL, cb1);
if (hret != H_SUCCESS)
@@ -2602,7 +2605,8 @@
if (netif_msg_ifdown(port))
ehea_info("disabling port %s", dev->name);
- flush_scheduled_work();
+ cancel_work_sync(&port->reset_task);
+
mutex_lock(&port->port_lock);
netif_stop_queue(dev);
port_napi_disable(port);
@@ -3177,11 +3181,12 @@
static void ehea_shutdown_single_port(struct ehea_port *port)
{
+ struct ehea_adapter *adapter = port->adapter;
unregister_netdev(port->netdev);
ehea_unregister_port(port);
kfree(port->mc_list);
free_netdev(port->netdev);
- port->adapter->active_ports--;
+ adapter->active_ports--;
}
static int ehea_setup_ports(struct ehea_adapter *adapter)
@@ -3503,6 +3508,24 @@
0, H_DEREG_BCMC);
}
+static int ehea_mem_notifier(struct notifier_block *nb,
+ unsigned long action, void *data)
+{
+ switch (action) {
+ case MEM_OFFLINE:
+ ehea_info("memory has been removed");
+ ehea_rereg_mrs(NULL);
+ break;
+ default:
+ break;
+ }
+ return NOTIFY_OK;
+}
+
+static struct notifier_block ehea_mem_nb = {
+ .notifier_call = ehea_mem_notifier,
+};
+
static int ehea_reboot_notifier(struct notifier_block *nb,
unsigned long action, void *unused)
{
@@ -3581,6 +3604,10 @@
if (ret)
ehea_info("failed registering reboot notifier");
+ ret = register_memory_notifier(&ehea_mem_nb);
+ if (ret)
+ ehea_info("failed registering memory remove notifier");
+
ret = crash_shutdown_register(&ehea_crash_handler);
if (ret)
ehea_info("failed registering crash handler");
@@ -3604,6 +3631,7 @@
out3:
ibmebus_unregister_driver(&ehea_driver);
out2:
+ unregister_memory_notifier(&ehea_mem_nb);
unregister_reboot_notifier(&ehea_reboot_nb);
crash_shutdown_unregister(&ehea_crash_handler);
out:
@@ -3621,6 +3649,7 @@
ret = crash_shutdown_unregister(&ehea_crash_handler);
if (ret)
ehea_info("failed unregistering crash handler");
+ unregister_memory_notifier(&ehea_mem_nb);
kfree(ehea_fw_handles.arr);
kfree(ehea_bcmc_regs.arr);
ehea_destroy_busmap();
diff --git a/drivers/net/ehea/ehea_qmr.c b/drivers/net/ehea/ehea_qmr.c
index d522e90..140f05b 100644
--- a/drivers/net/ehea/ehea_qmr.c
+++ b/drivers/net/ehea/ehea_qmr.c
@@ -31,8 +31,8 @@
#include "ehea_phyp.h"
#include "ehea_qmr.h"
+struct ehea_bmap *ehea_bmap = NULL;
-struct ehea_busmap ehea_bmap = { 0, 0, NULL };
static void *hw_qpageit_get_inc(struct hw_queue *queue)
@@ -559,125 +559,253 @@
return 0;
}
-int ehea_create_busmap(void)
+static inline int ehea_calc_index(unsigned long i, unsigned long s)
{
- u64 vaddr = EHEA_BUSMAP_START;
- unsigned long high_section_index = 0;
- int i;
+ return (i >> s) & EHEA_INDEX_MASK;
+}
- /*
- * Sections are not in ascending order -> Loop over all sections and
- * find the highest PFN to compute the required map size.
- */
- ehea_bmap.valid_sections = 0;
+static inline int ehea_init_top_bmap(struct ehea_top_bmap *ehea_top_bmap,
+ int dir)
+{
+ if(!ehea_top_bmap->dir[dir]) {
+ ehea_top_bmap->dir[dir] =
+ kzalloc(sizeof(struct ehea_dir_bmap), GFP_KERNEL);
+ if (!ehea_top_bmap->dir[dir])
+ return -ENOMEM;
+ }
+ return 0;
+}
- for (i = 0; i < NR_MEM_SECTIONS; i++)
- if (valid_section_nr(i))
- high_section_index = i;
+static inline int ehea_init_bmap(struct ehea_bmap *ehea_bmap, int top, int dir)
+{
+ if(!ehea_bmap->top[top]) {
+ ehea_bmap->top[top] =
+ kzalloc(sizeof(struct ehea_top_bmap), GFP_KERNEL);
+ if (!ehea_bmap->top[top])
+ return -ENOMEM;
+ }
+ return ehea_init_top_bmap(ehea_bmap->top[top], dir);
+}
- ehea_bmap.entries = high_section_index + 1;
- ehea_bmap.vaddr = vmalloc(ehea_bmap.entries * sizeof(*ehea_bmap.vaddr));
+static int ehea_create_busmap_callback(unsigned long pfn,
+ unsigned long nr_pages, void *arg)
+{
+ unsigned long i, mr_len, start_section, end_section;
+ start_section = (pfn * PAGE_SIZE) / EHEA_SECTSIZE;
+ end_section = start_section + ((nr_pages * PAGE_SIZE) / EHEA_SECTSIZE);
+ mr_len = *(unsigned long *)arg;
- if (!ehea_bmap.vaddr)
+ ehea_bmap = kzalloc(sizeof(struct ehea_bmap), GFP_KERNEL);
+ if (!ehea_bmap)
return -ENOMEM;
- for (i = 0 ; i < ehea_bmap.entries; i++) {
- unsigned long pfn = section_nr_to_pfn(i);
+ for (i = start_section; i < end_section; i++) {
+ int ret;
+ int top, dir, idx;
+ u64 vaddr;
- if (pfn_valid(pfn)) {
- ehea_bmap.vaddr[i] = vaddr;
- vaddr += EHEA_SECTSIZE;
- ehea_bmap.valid_sections++;
- } else
- ehea_bmap.vaddr[i] = 0;
+ top = ehea_calc_index(i, EHEA_TOP_INDEX_SHIFT);
+ dir = ehea_calc_index(i, EHEA_DIR_INDEX_SHIFT);
+
+ ret = ehea_init_bmap(ehea_bmap, top, dir);
+ if(ret)
+ return ret;
+
+ idx = i & EHEA_INDEX_MASK;
+ vaddr = EHEA_BUSMAP_START + mr_len + i * EHEA_SECTSIZE;
+
+ ehea_bmap->top[top]->dir[dir]->ent[idx] = vaddr;
}
+ mr_len += nr_pages * PAGE_SIZE;
+ *(unsigned long *)arg = mr_len;
+
return 0;
}
+static unsigned long ehea_mr_len;
+
+static DEFINE_MUTEX(ehea_busmap_mutex);
+
+int ehea_create_busmap(void)
+{
+ int ret;
+ mutex_lock(&ehea_busmap_mutex);
+ ehea_mr_len = 0;
+ ret = walk_memory_resource(0, 1ULL << MAX_PHYSMEM_BITS, &ehea_mr_len,
+ ehea_create_busmap_callback);
+ mutex_unlock(&ehea_busmap_mutex);
+ return ret;
+}
+
void ehea_destroy_busmap(void)
{
- vfree(ehea_bmap.vaddr);
+ int top, dir;
+ mutex_lock(&ehea_busmap_mutex);
+ if (!ehea_bmap)
+ goto out_destroy;
+
+ for (top = 0; top < EHEA_MAP_ENTRIES; top++) {
+ if (!ehea_bmap->top[top])
+ continue;
+
+ for (dir = 0; dir < EHEA_MAP_ENTRIES; dir++) {
+ if (!ehea_bmap->top[top]->dir[dir])
+ continue;
+
+ kfree(ehea_bmap->top[top]->dir[dir]);
+ }
+
+ kfree(ehea_bmap->top[top]);
+ }
+
+ kfree(ehea_bmap);
+ ehea_bmap = NULL;
+out_destroy:
+ mutex_unlock(&ehea_busmap_mutex);
}
u64 ehea_map_vaddr(void *caddr)
{
- u64 mapped_addr;
- unsigned long index = __pa(caddr) >> SECTION_SIZE_BITS;
+ int top, dir, idx;
+ unsigned long index, offset;
- if (likely(index < ehea_bmap.entries)) {
- mapped_addr = ehea_bmap.vaddr[index];
- if (likely(mapped_addr))
- mapped_addr |= (((unsigned long)caddr)
- & (EHEA_SECTSIZE - 1));
- else
- mapped_addr = -1;
- } else
- mapped_addr = -1;
+ if (!ehea_bmap)
+ return EHEA_INVAL_ADDR;
- if (unlikely(mapped_addr == -1))
- if (!test_and_set_bit(__EHEA_STOP_XFER, &ehea_driver_flags))
- schedule_work(&ehea_rereg_mr_task);
+ index = virt_to_abs(caddr) >> SECTION_SIZE_BITS;
+ top = (index >> EHEA_TOP_INDEX_SHIFT) & EHEA_INDEX_MASK;
+ if (!ehea_bmap->top[top])
+ return EHEA_INVAL_ADDR;
- return mapped_addr;
+ dir = (index >> EHEA_DIR_INDEX_SHIFT) & EHEA_INDEX_MASK;
+ if (!ehea_bmap->top[top]->dir[dir])
+ return EHEA_INVAL_ADDR;
+
+ idx = index & EHEA_INDEX_MASK;
+ if (!ehea_bmap->top[top]->dir[dir]->ent[idx])
+ return EHEA_INVAL_ADDR;
+
+ offset = (unsigned long)caddr & (EHEA_SECTSIZE - 1);
+ return ehea_bmap->top[top]->dir[dir]->ent[idx] | offset;
+}
+
+static inline void *ehea_calc_sectbase(int top, int dir, int idx)
+{
+ unsigned long ret = idx;
+ ret |= dir << EHEA_DIR_INDEX_SHIFT;
+ ret |= top << EHEA_TOP_INDEX_SHIFT;
+ return abs_to_virt(ret << SECTION_SIZE_BITS);
+}
+
+static u64 ehea_reg_mr_section(int top, int dir, int idx, u64 *pt,
+ struct ehea_adapter *adapter,
+ struct ehea_mr *mr)
+{
+ void *pg;
+ u64 j, m, hret;
+ unsigned long k = 0;
+ u64 pt_abs = virt_to_abs(pt);
+
+ void *sectbase = ehea_calc_sectbase(top, dir, idx);
+
+ for (j = 0; j < (EHEA_PAGES_PER_SECTION / EHEA_MAX_RPAGE); j++) {
+
+ for (m = 0; m < EHEA_MAX_RPAGE; m++) {
+ pg = sectbase + ((k++) * EHEA_PAGESIZE);
+ pt[m] = virt_to_abs(pg);
+ }
+ hret = ehea_h_register_rpage_mr(adapter->handle, mr->handle, 0,
+ 0, pt_abs, EHEA_MAX_RPAGE);
+
+ if ((hret != H_SUCCESS)
+ && (hret != H_PAGE_REGISTERED)) {
+ ehea_h_free_resource(adapter->handle, mr->handle,
+ FORCE_FREE);
+ ehea_error("register_rpage_mr failed");
+ return hret;
+ }
+ }
+ return hret;
+}
+
+static u64 ehea_reg_mr_sections(int top, int dir, u64 *pt,
+ struct ehea_adapter *adapter,
+ struct ehea_mr *mr)
+{
+ u64 hret = H_SUCCESS;
+ int idx;
+
+ for (idx = 0; idx < EHEA_MAP_ENTRIES; idx++) {
+ if (!ehea_bmap->top[top]->dir[dir]->ent[idx])
+ continue;
+
+ hret = ehea_reg_mr_section(top, dir, idx, pt, adapter, mr);
+ if ((hret != H_SUCCESS) && (hret != H_PAGE_REGISTERED))
+ return hret;
+ }
+ return hret;
+}
+
+static u64 ehea_reg_mr_dir_sections(int top, u64 *pt,
+ struct ehea_adapter *adapter,
+ struct ehea_mr *mr)
+{
+ u64 hret = H_SUCCESS;
+ int dir;
+
+ for (dir = 0; dir < EHEA_MAP_ENTRIES; dir++) {
+ if (!ehea_bmap->top[top]->dir[dir])
+ continue;
+
+ hret = ehea_reg_mr_sections(top, dir, pt, adapter, mr);
+ if ((hret != H_SUCCESS) && (hret != H_PAGE_REGISTERED))
+ return hret;
+ }
+ return hret;
}
int ehea_reg_kernel_mr(struct ehea_adapter *adapter, struct ehea_mr *mr)
{
int ret;
u64 *pt;
- void *pg;
- u64 hret, pt_abs, i, j, m, mr_len;
+ u64 hret;
u32 acc_ctrl = EHEA_MR_ACC_CTRL;
- mr_len = ehea_bmap.valid_sections * EHEA_SECTSIZE;
+ unsigned long top;
- pt = kzalloc(PAGE_SIZE, GFP_KERNEL);
+ pt = kzalloc(PAGE_SIZE, GFP_KERNEL);
if (!pt) {
ehea_error("no mem");
ret = -ENOMEM;
goto out;
}
- pt_abs = virt_to_abs(pt);
- hret = ehea_h_alloc_resource_mr(adapter->handle,
- EHEA_BUSMAP_START, mr_len,
- acc_ctrl, adapter->pd,
+ hret = ehea_h_alloc_resource_mr(adapter->handle, EHEA_BUSMAP_START,
+ ehea_mr_len, acc_ctrl, adapter->pd,
&mr->handle, &mr->lkey);
+
if (hret != H_SUCCESS) {
ehea_error("alloc_resource_mr failed");
ret = -EIO;
goto out;
}
- for (i = 0 ; i < ehea_bmap.entries; i++)
- if (ehea_bmap.vaddr[i]) {
- void *sectbase = __va(i << SECTION_SIZE_BITS);
- unsigned long k = 0;
+ if (!ehea_bmap) {
+ ehea_h_free_resource(adapter->handle, mr->handle, FORCE_FREE);
+ ehea_error("no busmap available");
+ ret = -EIO;
+ goto out;
+ }
- for (j = 0; j < (EHEA_PAGES_PER_SECTION /
- EHEA_MAX_RPAGE); j++) {
+ for (top = 0; top < EHEA_MAP_ENTRIES; top++) {
+ if (!ehea_bmap->top[top])
+ continue;
- for (m = 0; m < EHEA_MAX_RPAGE; m++) {
- pg = sectbase + ((k++) * EHEA_PAGESIZE);
- pt[m] = virt_to_abs(pg);
- }
-
- hret = ehea_h_register_rpage_mr(adapter->handle,
- mr->handle,
- 0, 0, pt_abs,
- EHEA_MAX_RPAGE);
- if ((hret != H_SUCCESS)
- && (hret != H_PAGE_REGISTERED)) {
- ehea_h_free_resource(adapter->handle,
- mr->handle,
- FORCE_FREE);
- ehea_error("register_rpage_mr failed");
- ret = -EIO;
- goto out;
- }
- }
- }
+ hret = ehea_reg_mr_dir_sections(top, pt, adapter, mr);
+ if((hret != H_PAGE_REGISTERED) && (hret != H_SUCCESS))
+ break;
+ }
if (hret != H_SUCCESS) {
ehea_h_free_resource(adapter->handle, mr->handle, FORCE_FREE);
diff --git a/drivers/net/fec_mpc52xx.c b/drivers/net/fec_mpc52xx.c
index 5f9c42e..329edd9 100644
--- a/drivers/net/fec_mpc52xx.c
+++ b/drivers/net/fec_mpc52xx.c
@@ -78,7 +78,7 @@
MODULE_PARM_DESC(mac, "six hex digits, ie. 0x1,0x2,0xc0,0x01,0xba,0xbe");
#define MPC52xx_MESSAGES_DEFAULT ( NETIF_MSG_DRV | NETIF_MSG_PROBE | \
- NETIF_MSG_LINK | NETIF_MSG_IFDOWN | NETIF_MSG_IFDOWN )
+ NETIF_MSG_LINK | NETIF_MSG_IFDOWN | NETIF_MSG_IFUP)
static int debug = -1; /* the above default */
module_param(debug, int, 0);
MODULE_PARM_DESC(debug, "debugging messages level");
diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c
index 35f66d4..2cb2447 100644
--- a/drivers/net/forcedeth.c
+++ b/drivers/net/forcedeth.c
@@ -3273,6 +3273,20 @@
dprintk(KERN_DEBUG "%s: link change notification done.\n", dev->name);
}
+static void nv_msi_workaround(struct fe_priv *np)
+{
+
+ /* Need to toggle the msi irq mask within the ethernet device,
+ * otherwise, future interrupts will not be detected.
+ */
+ if (np->msi_flags & NV_MSI_ENABLED) {
+ u8 __iomem *base = np->base;
+
+ writel(0, base + NvRegMSIIrqMask);
+ writel(NVREG_MSI_VECTOR_0_ENABLED, base + NvRegMSIIrqMask);
+ }
+}
+
static irqreturn_t nv_nic_irq(int foo, void *data)
{
struct net_device *dev = (struct net_device *) data;
@@ -3295,6 +3309,8 @@
if (!(events & np->irqmask))
break;
+ nv_msi_workaround(np);
+
spin_lock(&np->lock);
nv_tx_done(dev);
spin_unlock(&np->lock);
@@ -3410,6 +3426,8 @@
if (!(events & np->irqmask))
break;
+ nv_msi_workaround(np);
+
spin_lock(&np->lock);
nv_tx_done_optimized(dev, TX_WORK_PER_LOOP);
spin_unlock(&np->lock);
@@ -3750,6 +3768,8 @@
if (!(events & NVREG_IRQ_TIMER))
return IRQ_RETVAL(0);
+ nv_msi_workaround(np);
+
spin_lock(&np->lock);
np->intr_test = 1;
spin_unlock(&np->lock);
@@ -5823,6 +5843,7 @@
writel(txreg, base + NvRegTransmitPoll);
rc = nv_open(dev);
+ nv_set_multicast(dev);
out:
return rc;
}
diff --git a/drivers/net/fs_enet/fs_enet-main.c b/drivers/net/fs_enet/fs_enet-main.c
index 67b4b07..a5baaf5 100644
--- a/drivers/net/fs_enet/fs_enet-main.c
+++ b/drivers/net/fs_enet/fs_enet-main.c
@@ -1093,7 +1093,7 @@
if (registered)
unregister_netdev(ndev);
- if (fep != NULL) {
+ if (fep && fep->ops) {
(*fep->ops->free_bd)(ndev);
(*fep->ops->cleanup_data)(ndev);
}
diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
index 6f22f06..25bdd08 100644
--- a/drivers/net/gianfar.c
+++ b/drivers/net/gianfar.c
@@ -635,6 +635,8 @@
dev_kfree_skb_any(priv->tx_skbuff[i]);
priv->tx_skbuff[i] = NULL;
}
+
+ txbdp++;
}
kfree(priv->tx_skbuff);
diff --git a/drivers/net/hamradio/baycom_epp.c b/drivers/net/hamradio/baycom_epp.c
index dde9c7e..00bc7fb 100644
--- a/drivers/net/hamradio/baycom_epp.c
+++ b/drivers/net/hamradio/baycom_epp.c
@@ -959,7 +959,7 @@
unsigned char tmp[1];
bc->work_running = 0;
- flush_scheduled_work();
+ cancel_delayed_work_sync(&bc->run_work);
bc->stat = EPP_DCDBIT;
tmp[0] = 0;
pp->ops->epp_write_addr(pp, tmp, 1, 0);
diff --git a/drivers/net/hamradio/scc.c b/drivers/net/hamradio/scc.c
index f905159..45ae9d1 100644
--- a/drivers/net/hamradio/scc.c
+++ b/drivers/net/hamradio/scc.c
@@ -1340,9 +1340,10 @@
case PARAM_RTS:
if ( !(scc->wreg[R5] & RTS) )
{
- if (arg != TX_OFF)
+ if (arg != TX_OFF) {
scc_key_trx(scc, TX_ON);
scc_start_tx_timer(scc, t_txdelay, scc->kiss.txdelay);
+ }
} else {
if (arg == TX_OFF)
{
diff --git a/drivers/net/ipg.c b/drivers/net/ipg.c
index 9b358f6..679a082 100644
--- a/drivers/net/ipg.c
+++ b/drivers/net/ipg.c
@@ -577,12 +577,12 @@
/* NIC to be configured in promiscuous mode. */
receivemode = IPG_RM_RECEIVEALLFRAMES;
} else if ((dev->flags & IFF_ALLMULTI) ||
- (dev->flags & IFF_MULTICAST &
+ ((dev->flags & IFF_MULTICAST) &&
(dev->mc_count > IPG_MULTICAST_HASHTABLE_SIZE))) {
/* NIC to be configured to receive all multicast
* frames. */
receivemode |= IPG_RM_RECEIVEMULTICAST;
- } else if (dev->flags & IFF_MULTICAST & (dev->mc_count > 0)) {
+ } else if ((dev->flags & IFF_MULTICAST) && (dev->mc_count > 0)) {
/* NIC to be configured to receive selected
* multicast addresses. */
receivemode |= IPG_RM_RECEIVEMULTICASTHASH;
diff --git a/drivers/net/irda/Kconfig b/drivers/net/irda/Kconfig
index ce816ba..e631755 100644
--- a/drivers/net/irda/Kconfig
+++ b/drivers/net/irda/Kconfig
@@ -329,6 +329,7 @@
config MCS_FIR
tristate "MosChip MCS7780 IrDA-USB dongle"
depends on IRDA && USB && EXPERIMENTAL
+ select CRC32
help
Say Y or M here if you want to build support for the MosChip
MCS7780 IrDA-USB bridge device driver.
diff --git a/drivers/net/irda/irda-usb.c b/drivers/net/irda/irda-usb.c
index 9081234..6f50ed7 100644
--- a/drivers/net/irda/irda-usb.c
+++ b/drivers/net/irda/irda-usb.c
@@ -1120,7 +1120,7 @@
}
}
- if (self->usbdev->descriptor.bcdDevice == fw_version) {
+ if (self->usbdev->descriptor.bcdDevice == cpu_to_le16(fw_version)) {
/*
* If we're here, we've found a correct patch
* The actual image starts after the "STMP" keyword
diff --git a/drivers/net/irda/irda-usb.h b/drivers/net/irda/irda-usb.h
index e846c38..a0ca9c1 100644
--- a/drivers/net/irda/irda-usb.h
+++ b/drivers/net/irda/irda-usb.h
@@ -117,11 +117,11 @@
struct irda_class_desc {
__u8 bLength;
__u8 bDescriptorType;
- __u16 bcdSpecRevision;
+ __le16 bcdSpecRevision;
__u8 bmDataSize;
__u8 bmWindowSize;
__u8 bmMinTurnaroundTime;
- __u16 wBaudRate;
+ __le16 wBaudRate;
__u8 bmAdditionalBOFs;
__u8 bIrdaRateSniff;
__u8 bMaxUnicastList;
diff --git a/drivers/net/ixgbe/ixgbe_82598.c b/drivers/net/ixgbe/ixgbe_82598.c
index 6321b05..2f38e84 100644
--- a/drivers/net/ixgbe/ixgbe_82598.c
+++ b/drivers/net/ixgbe/ixgbe_82598.c
@@ -58,8 +58,8 @@
static s32 ixgbe_get_invariants_82598(struct ixgbe_hw *hw)
{
- hw->mac.num_rx_queues = IXGBE_82598_MAX_TX_QUEUES;
- hw->mac.num_tx_queues = IXGBE_82598_MAX_RX_QUEUES;
+ hw->mac.num_rx_queues = IXGBE_82598_MAX_RX_QUEUES;
+ hw->mac.num_tx_queues = IXGBE_82598_MAX_TX_QUEUES;
hw->mac.num_rx_addrs = IXGBE_82598_RAR_ENTRIES;
/* PHY ops are filled in by default properly for Fiber only */
diff --git a/drivers/net/mac89x0.c b/drivers/net/mac89x0.c
index 2a66e5b..4ce8afd 100644
--- a/drivers/net/mac89x0.c
+++ b/drivers/net/mac89x0.c
@@ -183,6 +183,9 @@
int err = -ENODEV;
DECLARE_MAC_BUF(mac);
+ if (!MACH_IS_MAC)
+ return ERR_PTR(-ENODEV);
+
dev = alloc_etherdev(sizeof(struct net_local));
if (!dev)
return ERR_PTR(-ENOMEM);
diff --git a/drivers/net/macmace.c b/drivers/net/macmace.c
index 1877052..51ad376 100644
--- a/drivers/net/macmace.c
+++ b/drivers/net/macmace.c
@@ -781,6 +781,9 @@
{
int err;
+ if (!MACH_IS_MAC)
+ return -ENODEV;
+
if ((err = platform_driver_register(&mac_mace_driver))) {
printk(KERN_ERR "Driver registration failed\n");
return err;
diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c
index ef63c8d..e0d76c7 100644
--- a/drivers/net/myri10ge/myri10ge.c
+++ b/drivers/net/myri10ge/myri10ge.c
@@ -75,7 +75,7 @@
#include "myri10ge_mcp.h"
#include "myri10ge_mcp_gen_header.h"
-#define MYRI10GE_VERSION_STR "1.3.2-1.287"
+#define MYRI10GE_VERSION_STR "1.3.99-1.347"
MODULE_DESCRIPTION("Myricom 10G driver (10GbE)");
MODULE_AUTHOR("Maintainer: help@myri.com");
@@ -144,11 +144,13 @@
char *req_bytes;
struct myri10ge_tx_buffer_state *info;
int mask; /* number of transmit slots -1 */
- int boundary; /* boundary transmits cannot cross */
int req ____cacheline_aligned; /* transmit slots submitted */
int pkt_start; /* packets started */
+ int stop_queue;
+ int linearized;
int done ____cacheline_aligned; /* transmit slots completed */
int pkt_done; /* packets completed */
+ int wake_queue;
};
struct myri10ge_rx_done {
@@ -160,29 +162,50 @@
struct net_lro_desc lro_desc[MYRI10GE_MAX_LRO_DESCRIPTORS];
};
-struct myri10ge_priv {
- int running; /* running? */
- int csum_flag; /* rx_csums? */
+struct myri10ge_slice_netstats {
+ unsigned long rx_packets;
+ unsigned long tx_packets;
+ unsigned long rx_bytes;
+ unsigned long tx_bytes;
+ unsigned long rx_dropped;
+ unsigned long tx_dropped;
+};
+
+struct myri10ge_slice_state {
struct myri10ge_tx_buf tx; /* transmit ring */
struct myri10ge_rx_buf rx_small;
struct myri10ge_rx_buf rx_big;
struct myri10ge_rx_done rx_done;
- int small_bytes;
- int big_bytes;
struct net_device *dev;
struct napi_struct napi;
+ struct myri10ge_priv *mgp;
+ struct myri10ge_slice_netstats stats;
+ __be32 __iomem *irq_claim;
+ struct mcp_irq_data *fw_stats;
+ dma_addr_t fw_stats_bus;
+ int watchdog_tx_done;
+ int watchdog_tx_req;
+};
+
+struct myri10ge_priv {
+ struct myri10ge_slice_state ss;
+ int tx_boundary; /* boundary transmits cannot cross */
+ int running; /* running? */
+ int csum_flag; /* rx_csums? */
+ int small_bytes;
+ int big_bytes;
+ int max_intr_slots;
+ struct net_device *dev;
struct net_device_stats stats;
+ spinlock_t stats_lock;
u8 __iomem *sram;
int sram_size;
unsigned long board_span;
unsigned long iomem_base;
- __be32 __iomem *irq_claim;
__be32 __iomem *irq_deassert;
char *mac_addr_string;
struct mcp_cmd_response *cmd;
dma_addr_t cmd_bus;
- struct mcp_irq_data *fw_stats;
- dma_addr_t fw_stats_bus;
struct pci_dev *pdev;
int msi_enabled;
u32 link_state;
@@ -191,20 +214,16 @@
__be32 __iomem *intr_coal_delay_ptr;
int mtrr;
int wc_enabled;
- int wake_queue;
- int stop_queue;
int down_cnt;
wait_queue_head_t down_wq;
struct work_struct watchdog_work;
struct timer_list watchdog_timer;
- int watchdog_tx_done;
- int watchdog_tx_req;
- int watchdog_pause;
int watchdog_resets;
- int tx_linearized;
+ int watchdog_pause;
int pause;
char *fw_name;
char eeprom_strings[MYRI10GE_EEPROM_STRINGS_SIZE];
+ char *product_code_string;
char fw_version[128];
int fw_ver_major;
int fw_ver_minor;
@@ -228,58 +247,54 @@
static char *myri10ge_fw_name = NULL;
module_param(myri10ge_fw_name, charp, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(myri10ge_fw_name, "Firmware image name\n");
+MODULE_PARM_DESC(myri10ge_fw_name, "Firmware image name");
static int myri10ge_ecrc_enable = 1;
module_param(myri10ge_ecrc_enable, int, S_IRUGO);
-MODULE_PARM_DESC(myri10ge_ecrc_enable, "Enable Extended CRC on PCI-E\n");
-
-static int myri10ge_max_intr_slots = 1024;
-module_param(myri10ge_max_intr_slots, int, S_IRUGO);
-MODULE_PARM_DESC(myri10ge_max_intr_slots, "Interrupt queue slots\n");
+MODULE_PARM_DESC(myri10ge_ecrc_enable, "Enable Extended CRC on PCI-E");
static int myri10ge_small_bytes = -1; /* -1 == auto */
module_param(myri10ge_small_bytes, int, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(myri10ge_small_bytes, "Threshold of small packets\n");
+MODULE_PARM_DESC(myri10ge_small_bytes, "Threshold of small packets");
static int myri10ge_msi = 1; /* enable msi by default */
module_param(myri10ge_msi, int, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(myri10ge_msi, "Enable Message Signalled Interrupts\n");
+MODULE_PARM_DESC(myri10ge_msi, "Enable Message Signalled Interrupts");
static int myri10ge_intr_coal_delay = 75;
module_param(myri10ge_intr_coal_delay, int, S_IRUGO);
-MODULE_PARM_DESC(myri10ge_intr_coal_delay, "Interrupt coalescing delay\n");
+MODULE_PARM_DESC(myri10ge_intr_coal_delay, "Interrupt coalescing delay");
static int myri10ge_flow_control = 1;
module_param(myri10ge_flow_control, int, S_IRUGO);
-MODULE_PARM_DESC(myri10ge_flow_control, "Pause parameter\n");
+MODULE_PARM_DESC(myri10ge_flow_control, "Pause parameter");
static int myri10ge_deassert_wait = 1;
module_param(myri10ge_deassert_wait, int, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(myri10ge_deassert_wait,
- "Wait when deasserting legacy interrupts\n");
+ "Wait when deasserting legacy interrupts");
static int myri10ge_force_firmware = 0;
module_param(myri10ge_force_firmware, int, S_IRUGO);
MODULE_PARM_DESC(myri10ge_force_firmware,
- "Force firmware to assume aligned completions\n");
+ "Force firmware to assume aligned completions");
static int myri10ge_initial_mtu = MYRI10GE_MAX_ETHER_MTU - ETH_HLEN;
module_param(myri10ge_initial_mtu, int, S_IRUGO);
-MODULE_PARM_DESC(myri10ge_initial_mtu, "Initial MTU\n");
+MODULE_PARM_DESC(myri10ge_initial_mtu, "Initial MTU");
static int myri10ge_napi_weight = 64;
module_param(myri10ge_napi_weight, int, S_IRUGO);
-MODULE_PARM_DESC(myri10ge_napi_weight, "Set NAPI weight\n");
+MODULE_PARM_DESC(myri10ge_napi_weight, "Set NAPI weight");
static int myri10ge_watchdog_timeout = 1;
module_param(myri10ge_watchdog_timeout, int, S_IRUGO);
-MODULE_PARM_DESC(myri10ge_watchdog_timeout, "Set watchdog timeout\n");
+MODULE_PARM_DESC(myri10ge_watchdog_timeout, "Set watchdog timeout");
static int myri10ge_max_irq_loops = 1048576;
module_param(myri10ge_max_irq_loops, int, S_IRUGO);
MODULE_PARM_DESC(myri10ge_max_irq_loops,
- "Set stuck legacy IRQ detection threshold\n");
+ "Set stuck legacy IRQ detection threshold");
#define MYRI10GE_MSG_DEFAULT NETIF_MSG_LINK
@@ -289,21 +304,22 @@
static int myri10ge_lro = 1;
module_param(myri10ge_lro, int, S_IRUGO);
-MODULE_PARM_DESC(myri10ge_lro, "Enable large receive offload\n");
+MODULE_PARM_DESC(myri10ge_lro, "Enable large receive offload");
static int myri10ge_lro_max_pkts = MYRI10GE_LRO_MAX_PKTS;
module_param(myri10ge_lro_max_pkts, int, S_IRUGO);
-MODULE_PARM_DESC(myri10ge_lro, "Number of LRO packets to be aggregated\n");
+MODULE_PARM_DESC(myri10ge_lro_max_pkts,
+ "Number of LRO packets to be aggregated");
static int myri10ge_fill_thresh = 256;
module_param(myri10ge_fill_thresh, int, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(myri10ge_fill_thresh, "Number of empty rx slots allowed\n");
+MODULE_PARM_DESC(myri10ge_fill_thresh, "Number of empty rx slots allowed");
static int myri10ge_reset_recover = 1;
static int myri10ge_wcfifo = 0;
module_param(myri10ge_wcfifo, int, S_IRUGO);
-MODULE_PARM_DESC(myri10ge_wcfifo, "Enable WC Fifo when WC is enabled\n");
+MODULE_PARM_DESC(myri10ge_wcfifo, "Enable WC Fifo when WC is enabled");
#define MYRI10GE_FW_OFFSET 1024*1024
#define MYRI10GE_HIGHPART_TO_U32(X) \
@@ -359,8 +375,10 @@
for (sleep_total = 0;
sleep_total < 1000
&& response->result == htonl(MYRI10GE_NO_RESPONSE_RESULT);
- sleep_total += 10)
+ sleep_total += 10) {
udelay(10);
+ mb();
+ }
} else {
/* use msleep for most command */
for (sleep_total = 0;
@@ -420,6 +438,10 @@
ptr += 1;
}
}
+ if (memcmp(ptr, "PC=", 3) == 0) {
+ ptr += 3;
+ mgp->product_code_string = ptr;
+ }
if (memcmp((const void *)ptr, "SN=", 3) == 0) {
ptr += 3;
mgp->serial_number = simple_strtoul(ptr, &ptr, 10);
@@ -442,7 +464,7 @@
static void myri10ge_dummy_rdma(struct myri10ge_priv *mgp, int enable)
{
char __iomem *submit;
- __be32 buf[16];
+ __be32 buf[16] __attribute__ ((__aligned__(8)));
u32 dma_low, dma_high;
int i;
@@ -609,13 +631,38 @@
return status;
}
+static int myri10ge_get_firmware_capabilities(struct myri10ge_priv *mgp)
+{
+ struct myri10ge_cmd cmd;
+ int status;
+
+ /* probe for IPv6 TSO support */
+ mgp->features = NETIF_F_SG | NETIF_F_HW_CSUM | NETIF_F_TSO;
+ status = myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_MAX_TSO6_HDR_SIZE,
+ &cmd, 0);
+ if (status == 0) {
+ mgp->max_tso6 = cmd.data0;
+ mgp->features |= NETIF_F_TSO6;
+ }
+
+ status = myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_RX_RING_SIZE, &cmd, 0);
+ if (status != 0) {
+ dev_err(&mgp->pdev->dev,
+ "failed MXGEFW_CMD_GET_RX_RING_SIZE\n");
+ return -ENXIO;
+ }
+
+ mgp->max_intr_slots = 2 * (cmd.data0 / sizeof(struct mcp_dma_addr));
+
+ return 0;
+}
+
static int myri10ge_load_firmware(struct myri10ge_priv *mgp)
{
char __iomem *submit;
- __be32 buf[16];
+ __be32 buf[16] __attribute__ ((__aligned__(8)));
u32 dma_low, dma_high, size;
int status, i;
- struct myri10ge_cmd cmd;
size = 0;
status = myri10ge_load_hotplug_firmware(mgp, &size);
@@ -635,7 +682,7 @@
}
dev_info(&mgp->pdev->dev,
"Successfully adopted running firmware\n");
- if (mgp->tx.boundary == 4096) {
+ if (mgp->tx_boundary == 4096) {
dev_warn(&mgp->pdev->dev,
"Using firmware currently running on NIC"
". For optimal\n");
@@ -646,7 +693,9 @@
}
mgp->fw_name = "adopted";
- mgp->tx.boundary = 2048;
+ mgp->tx_boundary = 2048;
+ myri10ge_dummy_rdma(mgp, 1);
+ status = myri10ge_get_firmware_capabilities(mgp);
return status;
}
@@ -681,26 +730,18 @@
msleep(1);
mb();
i = 0;
- while (mgp->cmd->data != MYRI10GE_NO_CONFIRM_DATA && i < 20) {
- msleep(1);
+ while (mgp->cmd->data != MYRI10GE_NO_CONFIRM_DATA && i < 9) {
+ msleep(1 << i);
i++;
}
if (mgp->cmd->data != MYRI10GE_NO_CONFIRM_DATA) {
dev_err(&mgp->pdev->dev, "handoff failed\n");
return -ENXIO;
}
- dev_info(&mgp->pdev->dev, "handoff confirmed\n");
myri10ge_dummy_rdma(mgp, 1);
+ status = myri10ge_get_firmware_capabilities(mgp);
- /* probe for IPv6 TSO support */
- mgp->features = NETIF_F_SG | NETIF_F_HW_CSUM | NETIF_F_TSO;
- status = myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_MAX_TSO6_HDR_SIZE,
- &cmd, 0);
- if (status == 0) {
- mgp->max_tso6 = cmd.data0;
- mgp->features |= NETIF_F_TSO6;
- }
- return 0;
+ return status;
}
static int myri10ge_update_mac_address(struct myri10ge_priv *mgp, u8 * addr)
@@ -772,7 +813,7 @@
* transfers took to complete.
*/
- len = mgp->tx.boundary;
+ len = mgp->tx_boundary;
cmd.data0 = MYRI10GE_LOWPART_TO_U32(dmatest_bus);
cmd.data1 = MYRI10GE_HIGHPART_TO_U32(dmatest_bus);
@@ -834,17 +875,17 @@
/* Now exchange information about interrupts */
- bytes = myri10ge_max_intr_slots * sizeof(*mgp->rx_done.entry);
- memset(mgp->rx_done.entry, 0, bytes);
+ bytes = mgp->max_intr_slots * sizeof(*mgp->ss.rx_done.entry);
+ memset(mgp->ss.rx_done.entry, 0, bytes);
cmd.data0 = (u32) bytes;
status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_INTRQ_SIZE, &cmd, 0);
- cmd.data0 = MYRI10GE_LOWPART_TO_U32(mgp->rx_done.bus);
- cmd.data1 = MYRI10GE_HIGHPART_TO_U32(mgp->rx_done.bus);
+ cmd.data0 = MYRI10GE_LOWPART_TO_U32(mgp->ss.rx_done.bus);
+ cmd.data1 = MYRI10GE_HIGHPART_TO_U32(mgp->ss.rx_done.bus);
status |= myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_INTRQ_DMA, &cmd, 0);
status |=
myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_IRQ_ACK_OFFSET, &cmd, 0);
- mgp->irq_claim = (__iomem __be32 *) (mgp->sram + cmd.data0);
+ mgp->ss.irq_claim = (__iomem __be32 *) (mgp->sram + cmd.data0);
status |= myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_IRQ_DEASSERT_OFFSET,
&cmd, 0);
mgp->irq_deassert = (__iomem __be32 *) (mgp->sram + cmd.data0);
@@ -858,17 +899,17 @@
}
put_be32(htonl(mgp->intr_coal_delay), mgp->intr_coal_delay_ptr);
- memset(mgp->rx_done.entry, 0, bytes);
+ memset(mgp->ss.rx_done.entry, 0, bytes);
/* reset mcp/driver shared state back to 0 */
- mgp->tx.req = 0;
- mgp->tx.done = 0;
- mgp->tx.pkt_start = 0;
- mgp->tx.pkt_done = 0;
- mgp->rx_big.cnt = 0;
- mgp->rx_small.cnt = 0;
- mgp->rx_done.idx = 0;
- mgp->rx_done.cnt = 0;
+ mgp->ss.tx.req = 0;
+ mgp->ss.tx.done = 0;
+ mgp->ss.tx.pkt_start = 0;
+ mgp->ss.tx.pkt_done = 0;
+ mgp->ss.rx_big.cnt = 0;
+ mgp->ss.rx_small.cnt = 0;
+ mgp->ss.rx_done.idx = 0;
+ mgp->ss.rx_done.cnt = 0;
mgp->link_changes = 0;
status = myri10ge_update_mac_address(mgp, mgp->dev->dev_addr);
myri10ge_change_pause(mgp, mgp->pause);
@@ -1020,9 +1061,10 @@
* page into an skb */
static inline int
-myri10ge_rx_done(struct myri10ge_priv *mgp, struct myri10ge_rx_buf *rx,
+myri10ge_rx_done(struct myri10ge_slice_state *ss, struct myri10ge_rx_buf *rx,
int bytes, int len, __wsum csum)
{
+ struct myri10ge_priv *mgp = ss->mgp;
struct sk_buff *skb;
struct skb_frag_struct rx_frags[MYRI10GE_MAX_FRAGS_PER_FRAME];
int i, idx, hlen, remainder;
@@ -1052,11 +1094,10 @@
rx_frags[0].page_offset += MXGEFW_PAD;
rx_frags[0].size -= MXGEFW_PAD;
len -= MXGEFW_PAD;
- lro_receive_frags(&mgp->rx_done.lro_mgr, rx_frags,
+ lro_receive_frags(&ss->rx_done.lro_mgr, rx_frags,
len, len,
- /* opaque, will come back in get_frag_header */
- (void *)(__force unsigned long)csum,
- csum);
+ /* opaque, will come back in get_frag_header */
+ (void *)(__force unsigned long)csum, csum);
return 1;
}
@@ -1096,10 +1137,11 @@
return 1;
}
-static inline void myri10ge_tx_done(struct myri10ge_priv *mgp, int mcp_index)
+static inline void
+myri10ge_tx_done(struct myri10ge_slice_state *ss, int mcp_index)
{
- struct pci_dev *pdev = mgp->pdev;
- struct myri10ge_tx_buf *tx = &mgp->tx;
+ struct pci_dev *pdev = ss->mgp->pdev;
+ struct myri10ge_tx_buf *tx = &ss->tx;
struct sk_buff *skb;
int idx, len;
@@ -1117,8 +1159,8 @@
len = pci_unmap_len(&tx->info[idx], len);
pci_unmap_len_set(&tx->info[idx], len, 0);
if (skb) {
- mgp->stats.tx_bytes += skb->len;
- mgp->stats.tx_packets++;
+ ss->stats.tx_bytes += skb->len;
+ ss->stats.tx_packets++;
dev_kfree_skb_irq(skb);
if (len)
pci_unmap_single(pdev,
@@ -1134,16 +1176,18 @@
}
}
/* start the queue if we've stopped it */
- if (netif_queue_stopped(mgp->dev)
+ if (netif_queue_stopped(ss->dev)
&& tx->req - tx->done < (tx->mask >> 1)) {
- mgp->wake_queue++;
- netif_wake_queue(mgp->dev);
+ tx->wake_queue++;
+ netif_wake_queue(ss->dev);
}
}
-static inline int myri10ge_clean_rx_done(struct myri10ge_priv *mgp, int budget)
+static inline int
+myri10ge_clean_rx_done(struct myri10ge_slice_state *ss, int budget)
{
- struct myri10ge_rx_done *rx_done = &mgp->rx_done;
+ struct myri10ge_rx_done *rx_done = &ss->rx_done;
+ struct myri10ge_priv *mgp = ss->mgp;
unsigned long rx_bytes = 0;
unsigned long rx_packets = 0;
unsigned long rx_ok;
@@ -1159,40 +1203,40 @@
rx_done->entry[idx].length = 0;
checksum = csum_unfold(rx_done->entry[idx].checksum);
if (length <= mgp->small_bytes)
- rx_ok = myri10ge_rx_done(mgp, &mgp->rx_small,
+ rx_ok = myri10ge_rx_done(ss, &ss->rx_small,
mgp->small_bytes,
length, checksum);
else
- rx_ok = myri10ge_rx_done(mgp, &mgp->rx_big,
+ rx_ok = myri10ge_rx_done(ss, &ss->rx_big,
mgp->big_bytes,
length, checksum);
rx_packets += rx_ok;
rx_bytes += rx_ok * (unsigned long)length;
cnt++;
- idx = cnt & (myri10ge_max_intr_slots - 1);
+ idx = cnt & (mgp->max_intr_slots - 1);
work_done++;
}
rx_done->idx = idx;
rx_done->cnt = cnt;
- mgp->stats.rx_packets += rx_packets;
- mgp->stats.rx_bytes += rx_bytes;
+ ss->stats.rx_packets += rx_packets;
+ ss->stats.rx_bytes += rx_bytes;
if (myri10ge_lro)
lro_flush_all(&rx_done->lro_mgr);
/* restock receive rings if needed */
- if (mgp->rx_small.fill_cnt - mgp->rx_small.cnt < myri10ge_fill_thresh)
- myri10ge_alloc_rx_pages(mgp, &mgp->rx_small,
+ if (ss->rx_small.fill_cnt - ss->rx_small.cnt < myri10ge_fill_thresh)
+ myri10ge_alloc_rx_pages(mgp, &ss->rx_small,
mgp->small_bytes + MXGEFW_PAD, 0);
- if (mgp->rx_big.fill_cnt - mgp->rx_big.cnt < myri10ge_fill_thresh)
- myri10ge_alloc_rx_pages(mgp, &mgp->rx_big, mgp->big_bytes, 0);
+ if (ss->rx_big.fill_cnt - ss->rx_big.cnt < myri10ge_fill_thresh)
+ myri10ge_alloc_rx_pages(mgp, &ss->rx_big, mgp->big_bytes, 0);
return work_done;
}
static inline void myri10ge_check_statblock(struct myri10ge_priv *mgp)
{
- struct mcp_irq_data *stats = mgp->fw_stats;
+ struct mcp_irq_data *stats = mgp->ss.fw_stats;
if (unlikely(stats->stats_updated)) {
unsigned link_up = ntohl(stats->link_up);
@@ -1219,9 +1263,9 @@
}
}
if (mgp->rdma_tags_available !=
- ntohl(mgp->fw_stats->rdma_tags_available)) {
+ ntohl(stats->rdma_tags_available)) {
mgp->rdma_tags_available =
- ntohl(mgp->fw_stats->rdma_tags_available);
+ ntohl(stats->rdma_tags_available);
printk(KERN_WARNING "myri10ge: %s: RDMA timed out! "
"%d tags left\n", mgp->dev->name,
mgp->rdma_tags_available);
@@ -1234,26 +1278,27 @@
static int myri10ge_poll(struct napi_struct *napi, int budget)
{
- struct myri10ge_priv *mgp =
- container_of(napi, struct myri10ge_priv, napi);
- struct net_device *netdev = mgp->dev;
+ struct myri10ge_slice_state *ss =
+ container_of(napi, struct myri10ge_slice_state, napi);
+ struct net_device *netdev = ss->mgp->dev;
int work_done;
/* process as many rx events as NAPI will allow */
- work_done = myri10ge_clean_rx_done(mgp, budget);
+ work_done = myri10ge_clean_rx_done(ss, budget);
if (work_done < budget) {
netif_rx_complete(netdev, napi);
- put_be32(htonl(3), mgp->irq_claim);
+ put_be32(htonl(3), ss->irq_claim);
}
return work_done;
}
static irqreturn_t myri10ge_intr(int irq, void *arg)
{
- struct myri10ge_priv *mgp = arg;
- struct mcp_irq_data *stats = mgp->fw_stats;
- struct myri10ge_tx_buf *tx = &mgp->tx;
+ struct myri10ge_slice_state *ss = arg;
+ struct myri10ge_priv *mgp = ss->mgp;
+ struct mcp_irq_data *stats = ss->fw_stats;
+ struct myri10ge_tx_buf *tx = &ss->tx;
u32 send_done_count;
int i;
@@ -1264,7 +1309,7 @@
/* low bit indicates receives are present, so schedule
* napi poll handler */
if (stats->valid & 1)
- netif_rx_schedule(mgp->dev, &mgp->napi);
+ netif_rx_schedule(ss->dev, &ss->napi);
if (!mgp->msi_enabled) {
put_be32(0, mgp->irq_deassert);
@@ -1281,7 +1326,7 @@
/* check for transmit completes and receives */
send_done_count = ntohl(stats->send_done_count);
if (send_done_count != tx->pkt_done)
- myri10ge_tx_done(mgp, (int)send_done_count);
+ myri10ge_tx_done(ss, (int)send_done_count);
if (unlikely(i > myri10ge_max_irq_loops)) {
printk(KERN_WARNING "myri10ge: %s: irq stuck?\n",
mgp->dev->name);
@@ -1296,16 +1341,46 @@
myri10ge_check_statblock(mgp);
- put_be32(htonl(3), mgp->irq_claim + 1);
+ put_be32(htonl(3), ss->irq_claim + 1);
return (IRQ_HANDLED);
}
static int
myri10ge_get_settings(struct net_device *netdev, struct ethtool_cmd *cmd)
{
+ struct myri10ge_priv *mgp = netdev_priv(netdev);
+ char *ptr;
+ int i;
+
cmd->autoneg = AUTONEG_DISABLE;
cmd->speed = SPEED_10000;
cmd->duplex = DUPLEX_FULL;
+
+ /*
+ * parse the product code to deterimine the interface type
+ * (CX4, XFP, Quad Ribbon Fiber) by looking at the character
+ * after the 3rd dash in the driver's cached copy of the
+ * EEPROM's product code string.
+ */
+ ptr = mgp->product_code_string;
+ if (ptr == NULL) {
+ printk(KERN_ERR "myri10ge: %s: Missing product code\n",
+ netdev->name);
+ return 0;
+ }
+ for (i = 0; i < 3; i++, ptr++) {
+ ptr = strchr(ptr, '-');
+ if (ptr == NULL) {
+ printk(KERN_ERR "myri10ge: %s: Invalid product "
+ "code %s\n", netdev->name,
+ mgp->product_code_string);
+ return 0;
+ }
+ }
+ if (*ptr == 'R' || *ptr == 'Q') {
+ /* We've found either an XFP or quad ribbon fiber */
+ cmd->port = PORT_FIBRE;
+ }
return 0;
}
@@ -1324,6 +1399,7 @@
myri10ge_get_coalesce(struct net_device *netdev, struct ethtool_coalesce *coal)
{
struct myri10ge_priv *mgp = netdev_priv(netdev);
+
coal->rx_coalesce_usecs = mgp->intr_coal_delay;
return 0;
}
@@ -1370,10 +1446,10 @@
{
struct myri10ge_priv *mgp = netdev_priv(netdev);
- ring->rx_mini_max_pending = mgp->rx_small.mask + 1;
- ring->rx_max_pending = mgp->rx_big.mask + 1;
+ ring->rx_mini_max_pending = mgp->ss.rx_small.mask + 1;
+ ring->rx_max_pending = mgp->ss.rx_big.mask + 1;
ring->rx_jumbo_max_pending = 0;
- ring->tx_max_pending = mgp->rx_small.mask + 1;
+ ring->tx_max_pending = mgp->ss.rx_small.mask + 1;
ring->rx_mini_pending = ring->rx_mini_max_pending;
ring->rx_pending = ring->rx_max_pending;
ring->rx_jumbo_pending = ring->rx_jumbo_max_pending;
@@ -1383,6 +1459,7 @@
static u32 myri10ge_get_rx_csum(struct net_device *netdev)
{
struct myri10ge_priv *mgp = netdev_priv(netdev);
+
if (mgp->csum_flag)
return 1;
else
@@ -1392,6 +1469,7 @@
static int myri10ge_set_rx_csum(struct net_device *netdev, u32 csum_enabled)
{
struct myri10ge_priv *mgp = netdev_priv(netdev);
+
if (csum_enabled)
mgp->csum_flag = MXGEFW_FLAGS_CKSUM;
else
@@ -1411,7 +1489,7 @@
return 0;
}
-static const char myri10ge_gstrings_stats[][ETH_GSTRING_LEN] = {
+static const char myri10ge_gstrings_main_stats[][ETH_GSTRING_LEN] = {
"rx_packets", "tx_packets", "rx_bytes", "tx_bytes", "rx_errors",
"tx_errors", "rx_dropped", "tx_dropped", "multicast", "collisions",
"rx_length_errors", "rx_over_errors", "rx_crc_errors",
@@ -1421,28 +1499,39 @@
/* device-specific stats */
"tx_boundary", "WC", "irq", "MSI",
"read_dma_bw_MBs", "write_dma_bw_MBs", "read_write_dma_bw_MBs",
- "serial_number", "tx_pkt_start", "tx_pkt_done",
- "tx_req", "tx_done", "rx_small_cnt", "rx_big_cnt",
- "wake_queue", "stop_queue", "watchdog_resets", "tx_linearized",
+ "serial_number", "watchdog_resets",
"link_changes", "link_up", "dropped_link_overflow",
"dropped_link_error_or_filtered",
"dropped_pause", "dropped_bad_phy", "dropped_bad_crc32",
"dropped_unicast_filtered", "dropped_multicast_filtered",
"dropped_runt", "dropped_overrun", "dropped_no_small_buffer",
- "dropped_no_big_buffer", "LRO aggregated", "LRO flushed",
+ "dropped_no_big_buffer"
+};
+
+static const char myri10ge_gstrings_slice_stats[][ETH_GSTRING_LEN] = {
+ "----------- slice ---------",
+ "tx_pkt_start", "tx_pkt_done", "tx_req", "tx_done",
+ "rx_small_cnt", "rx_big_cnt",
+ "wake_queue", "stop_queue", "tx_linearized", "LRO aggregated",
+ "LRO flushed",
"LRO avg aggr", "LRO no_desc"
};
#define MYRI10GE_NET_STATS_LEN 21
-#define MYRI10GE_STATS_LEN ARRAY_SIZE(myri10ge_gstrings_stats)
+#define MYRI10GE_MAIN_STATS_LEN ARRAY_SIZE(myri10ge_gstrings_main_stats)
+#define MYRI10GE_SLICE_STATS_LEN ARRAY_SIZE(myri10ge_gstrings_slice_stats)
static void
myri10ge_get_strings(struct net_device *netdev, u32 stringset, u8 * data)
{
switch (stringset) {
case ETH_SS_STATS:
- memcpy(data, *myri10ge_gstrings_stats,
- sizeof(myri10ge_gstrings_stats));
+ memcpy(data, *myri10ge_gstrings_main_stats,
+ sizeof(myri10ge_gstrings_main_stats));
+ data += sizeof(myri10ge_gstrings_main_stats);
+ memcpy(data, *myri10ge_gstrings_slice_stats,
+ sizeof(myri10ge_gstrings_slice_stats));
+ data += sizeof(myri10ge_gstrings_slice_stats);
break;
}
}
@@ -1451,7 +1540,7 @@
{
switch (sset) {
case ETH_SS_STATS:
- return MYRI10GE_STATS_LEN;
+ return MYRI10GE_MAIN_STATS_LEN + MYRI10GE_SLICE_STATS_LEN;
default:
return -EOPNOTSUPP;
}
@@ -1462,12 +1551,13 @@
struct ethtool_stats *stats, u64 * data)
{
struct myri10ge_priv *mgp = netdev_priv(netdev);
+ struct myri10ge_slice_state *ss;
int i;
for (i = 0; i < MYRI10GE_NET_STATS_LEN; i++)
data[i] = ((unsigned long *)&mgp->stats)[i];
- data[i++] = (unsigned int)mgp->tx.boundary;
+ data[i++] = (unsigned int)mgp->tx_boundary;
data[i++] = (unsigned int)mgp->wc_enabled;
data[i++] = (unsigned int)mgp->pdev->irq;
data[i++] = (unsigned int)mgp->msi_enabled;
@@ -1475,40 +1565,44 @@
data[i++] = (unsigned int)mgp->write_dma;
data[i++] = (unsigned int)mgp->read_write_dma;
data[i++] = (unsigned int)mgp->serial_number;
- data[i++] = (unsigned int)mgp->tx.pkt_start;
- data[i++] = (unsigned int)mgp->tx.pkt_done;
- data[i++] = (unsigned int)mgp->tx.req;
- data[i++] = (unsigned int)mgp->tx.done;
- data[i++] = (unsigned int)mgp->rx_small.cnt;
- data[i++] = (unsigned int)mgp->rx_big.cnt;
- data[i++] = (unsigned int)mgp->wake_queue;
- data[i++] = (unsigned int)mgp->stop_queue;
data[i++] = (unsigned int)mgp->watchdog_resets;
- data[i++] = (unsigned int)mgp->tx_linearized;
data[i++] = (unsigned int)mgp->link_changes;
- data[i++] = (unsigned int)ntohl(mgp->fw_stats->link_up);
- data[i++] = (unsigned int)ntohl(mgp->fw_stats->dropped_link_overflow);
+
+ /* firmware stats are useful only in the first slice */
+ ss = &mgp->ss;
+ data[i++] = (unsigned int)ntohl(ss->fw_stats->link_up);
+ data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_link_overflow);
data[i++] =
- (unsigned int)ntohl(mgp->fw_stats->dropped_link_error_or_filtered);
- data[i++] = (unsigned int)ntohl(mgp->fw_stats->dropped_pause);
- data[i++] = (unsigned int)ntohl(mgp->fw_stats->dropped_bad_phy);
- data[i++] = (unsigned int)ntohl(mgp->fw_stats->dropped_bad_crc32);
+ (unsigned int)ntohl(ss->fw_stats->dropped_link_error_or_filtered);
+ data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_pause);
+ data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_bad_phy);
+ data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_bad_crc32);
+ data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_unicast_filtered);
data[i++] =
- (unsigned int)ntohl(mgp->fw_stats->dropped_unicast_filtered);
- data[i++] =
- (unsigned int)ntohl(mgp->fw_stats->dropped_multicast_filtered);
- data[i++] = (unsigned int)ntohl(mgp->fw_stats->dropped_runt);
- data[i++] = (unsigned int)ntohl(mgp->fw_stats->dropped_overrun);
- data[i++] = (unsigned int)ntohl(mgp->fw_stats->dropped_no_small_buffer);
- data[i++] = (unsigned int)ntohl(mgp->fw_stats->dropped_no_big_buffer);
- data[i++] = mgp->rx_done.lro_mgr.stats.aggregated;
- data[i++] = mgp->rx_done.lro_mgr.stats.flushed;
- if (mgp->rx_done.lro_mgr.stats.flushed)
- data[i++] = mgp->rx_done.lro_mgr.stats.aggregated /
- mgp->rx_done.lro_mgr.stats.flushed;
+ (unsigned int)ntohl(ss->fw_stats->dropped_multicast_filtered);
+ data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_runt);
+ data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_overrun);
+ data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_no_small_buffer);
+ data[i++] = (unsigned int)ntohl(ss->fw_stats->dropped_no_big_buffer);
+
+ data[i++] = 0;
+ data[i++] = (unsigned int)ss->tx.pkt_start;
+ data[i++] = (unsigned int)ss->tx.pkt_done;
+ data[i++] = (unsigned int)ss->tx.req;
+ data[i++] = (unsigned int)ss->tx.done;
+ data[i++] = (unsigned int)ss->rx_small.cnt;
+ data[i++] = (unsigned int)ss->rx_big.cnt;
+ data[i++] = (unsigned int)ss->tx.wake_queue;
+ data[i++] = (unsigned int)ss->tx.stop_queue;
+ data[i++] = (unsigned int)ss->tx.linearized;
+ data[i++] = ss->rx_done.lro_mgr.stats.aggregated;
+ data[i++] = ss->rx_done.lro_mgr.stats.flushed;
+ if (ss->rx_done.lro_mgr.stats.flushed)
+ data[i++] = ss->rx_done.lro_mgr.stats.aggregated /
+ ss->rx_done.lro_mgr.stats.flushed;
else
data[i++] = 0;
- data[i++] = mgp->rx_done.lro_mgr.stats.no_desc;
+ data[i++] = ss->rx_done.lro_mgr.stats.no_desc;
}
static void myri10ge_set_msglevel(struct net_device *netdev, u32 value)
@@ -1544,19 +1638,17 @@
.get_msglevel = myri10ge_get_msglevel
};
-static int myri10ge_allocate_rings(struct net_device *dev)
+static int myri10ge_allocate_rings(struct myri10ge_slice_state *ss)
{
- struct myri10ge_priv *mgp;
+ struct myri10ge_priv *mgp = ss->mgp;
struct myri10ge_cmd cmd;
+ struct net_device *dev = mgp->dev;
int tx_ring_size, rx_ring_size;
int tx_ring_entries, rx_ring_entries;
int i, status;
size_t bytes;
- mgp = netdev_priv(dev);
-
/* get ring sizes */
-
status = myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_SEND_RING_SIZE, &cmd, 0);
tx_ring_size = cmd.data0;
status |= myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_RX_RING_SIZE, &cmd, 0);
@@ -1566,144 +1658,142 @@
tx_ring_entries = tx_ring_size / sizeof(struct mcp_kreq_ether_send);
rx_ring_entries = rx_ring_size / sizeof(struct mcp_dma_addr);
- mgp->tx.mask = tx_ring_entries - 1;
- mgp->rx_small.mask = mgp->rx_big.mask = rx_ring_entries - 1;
+ ss->tx.mask = tx_ring_entries - 1;
+ ss->rx_small.mask = ss->rx_big.mask = rx_ring_entries - 1;
status = -ENOMEM;
/* allocate the host shadow rings */
bytes = 8 + (MYRI10GE_MAX_SEND_DESC_TSO + 4)
- * sizeof(*mgp->tx.req_list);
- mgp->tx.req_bytes = kzalloc(bytes, GFP_KERNEL);
- if (mgp->tx.req_bytes == NULL)
+ * sizeof(*ss->tx.req_list);
+ ss->tx.req_bytes = kzalloc(bytes, GFP_KERNEL);
+ if (ss->tx.req_bytes == NULL)
goto abort_with_nothing;
/* ensure req_list entries are aligned to 8 bytes */
- mgp->tx.req_list = (struct mcp_kreq_ether_send *)
- ALIGN((unsigned long)mgp->tx.req_bytes, 8);
+ ss->tx.req_list = (struct mcp_kreq_ether_send *)
+ ALIGN((unsigned long)ss->tx.req_bytes, 8);
- bytes = rx_ring_entries * sizeof(*mgp->rx_small.shadow);
- mgp->rx_small.shadow = kzalloc(bytes, GFP_KERNEL);
- if (mgp->rx_small.shadow == NULL)
+ bytes = rx_ring_entries * sizeof(*ss->rx_small.shadow);
+ ss->rx_small.shadow = kzalloc(bytes, GFP_KERNEL);
+ if (ss->rx_small.shadow == NULL)
goto abort_with_tx_req_bytes;
- bytes = rx_ring_entries * sizeof(*mgp->rx_big.shadow);
- mgp->rx_big.shadow = kzalloc(bytes, GFP_KERNEL);
- if (mgp->rx_big.shadow == NULL)
+ bytes = rx_ring_entries * sizeof(*ss->rx_big.shadow);
+ ss->rx_big.shadow = kzalloc(bytes, GFP_KERNEL);
+ if (ss->rx_big.shadow == NULL)
goto abort_with_rx_small_shadow;
/* allocate the host info rings */
- bytes = tx_ring_entries * sizeof(*mgp->tx.info);
- mgp->tx.info = kzalloc(bytes, GFP_KERNEL);
- if (mgp->tx.info == NULL)
+ bytes = tx_ring_entries * sizeof(*ss->tx.info);
+ ss->tx.info = kzalloc(bytes, GFP_KERNEL);
+ if (ss->tx.info == NULL)
goto abort_with_rx_big_shadow;
- bytes = rx_ring_entries * sizeof(*mgp->rx_small.info);
- mgp->rx_small.info = kzalloc(bytes, GFP_KERNEL);
- if (mgp->rx_small.info == NULL)
+ bytes = rx_ring_entries * sizeof(*ss->rx_small.info);
+ ss->rx_small.info = kzalloc(bytes, GFP_KERNEL);
+ if (ss->rx_small.info == NULL)
goto abort_with_tx_info;
- bytes = rx_ring_entries * sizeof(*mgp->rx_big.info);
- mgp->rx_big.info = kzalloc(bytes, GFP_KERNEL);
- if (mgp->rx_big.info == NULL)
+ bytes = rx_ring_entries * sizeof(*ss->rx_big.info);
+ ss->rx_big.info = kzalloc(bytes, GFP_KERNEL);
+ if (ss->rx_big.info == NULL)
goto abort_with_rx_small_info;
/* Fill the receive rings */
- mgp->rx_big.cnt = 0;
- mgp->rx_small.cnt = 0;
- mgp->rx_big.fill_cnt = 0;
- mgp->rx_small.fill_cnt = 0;
- mgp->rx_small.page_offset = MYRI10GE_ALLOC_SIZE;
- mgp->rx_big.page_offset = MYRI10GE_ALLOC_SIZE;
- mgp->rx_small.watchdog_needed = 0;
- mgp->rx_big.watchdog_needed = 0;
- myri10ge_alloc_rx_pages(mgp, &mgp->rx_small,
+ ss->rx_big.cnt = 0;
+ ss->rx_small.cnt = 0;
+ ss->rx_big.fill_cnt = 0;
+ ss->rx_small.fill_cnt = 0;
+ ss->rx_small.page_offset = MYRI10GE_ALLOC_SIZE;
+ ss->rx_big.page_offset = MYRI10GE_ALLOC_SIZE;
+ ss->rx_small.watchdog_needed = 0;
+ ss->rx_big.watchdog_needed = 0;
+ myri10ge_alloc_rx_pages(mgp, &ss->rx_small,
mgp->small_bytes + MXGEFW_PAD, 0);
- if (mgp->rx_small.fill_cnt < mgp->rx_small.mask + 1) {
+ if (ss->rx_small.fill_cnt < ss->rx_small.mask + 1) {
printk(KERN_ERR "myri10ge: %s: alloced only %d small bufs\n",
- dev->name, mgp->rx_small.fill_cnt);
+ dev->name, ss->rx_small.fill_cnt);
goto abort_with_rx_small_ring;
}
- myri10ge_alloc_rx_pages(mgp, &mgp->rx_big, mgp->big_bytes, 0);
- if (mgp->rx_big.fill_cnt < mgp->rx_big.mask + 1) {
+ myri10ge_alloc_rx_pages(mgp, &ss->rx_big, mgp->big_bytes, 0);
+ if (ss->rx_big.fill_cnt < ss->rx_big.mask + 1) {
printk(KERN_ERR "myri10ge: %s: alloced only %d big bufs\n",
- dev->name, mgp->rx_big.fill_cnt);
+ dev->name, ss->rx_big.fill_cnt);
goto abort_with_rx_big_ring;
}
return 0;
abort_with_rx_big_ring:
- for (i = mgp->rx_big.cnt; i < mgp->rx_big.fill_cnt; i++) {
- int idx = i & mgp->rx_big.mask;
- myri10ge_unmap_rx_page(mgp->pdev, &mgp->rx_big.info[idx],
+ for (i = ss->rx_big.cnt; i < ss->rx_big.fill_cnt; i++) {
+ int idx = i & ss->rx_big.mask;
+ myri10ge_unmap_rx_page(mgp->pdev, &ss->rx_big.info[idx],
mgp->big_bytes);
- put_page(mgp->rx_big.info[idx].page);
+ put_page(ss->rx_big.info[idx].page);
}
abort_with_rx_small_ring:
- for (i = mgp->rx_small.cnt; i < mgp->rx_small.fill_cnt; i++) {
- int idx = i & mgp->rx_small.mask;
- myri10ge_unmap_rx_page(mgp->pdev, &mgp->rx_small.info[idx],
+ for (i = ss->rx_small.cnt; i < ss->rx_small.fill_cnt; i++) {
+ int idx = i & ss->rx_small.mask;
+ myri10ge_unmap_rx_page(mgp->pdev, &ss->rx_small.info[idx],
mgp->small_bytes + MXGEFW_PAD);
- put_page(mgp->rx_small.info[idx].page);
+ put_page(ss->rx_small.info[idx].page);
}
- kfree(mgp->rx_big.info);
+ kfree(ss->rx_big.info);
abort_with_rx_small_info:
- kfree(mgp->rx_small.info);
+ kfree(ss->rx_small.info);
abort_with_tx_info:
- kfree(mgp->tx.info);
+ kfree(ss->tx.info);
abort_with_rx_big_shadow:
- kfree(mgp->rx_big.shadow);
+ kfree(ss->rx_big.shadow);
abort_with_rx_small_shadow:
- kfree(mgp->rx_small.shadow);
+ kfree(ss->rx_small.shadow);
abort_with_tx_req_bytes:
- kfree(mgp->tx.req_bytes);
- mgp->tx.req_bytes = NULL;
- mgp->tx.req_list = NULL;
+ kfree(ss->tx.req_bytes);
+ ss->tx.req_bytes = NULL;
+ ss->tx.req_list = NULL;
abort_with_nothing:
return status;
}
-static void myri10ge_free_rings(struct net_device *dev)
+static void myri10ge_free_rings(struct myri10ge_slice_state *ss)
{
- struct myri10ge_priv *mgp;
+ struct myri10ge_priv *mgp = ss->mgp;
struct sk_buff *skb;
struct myri10ge_tx_buf *tx;
int i, len, idx;
- mgp = netdev_priv(dev);
-
- for (i = mgp->rx_big.cnt; i < mgp->rx_big.fill_cnt; i++) {
- idx = i & mgp->rx_big.mask;
- if (i == mgp->rx_big.fill_cnt - 1)
- mgp->rx_big.info[idx].page_offset = MYRI10GE_ALLOC_SIZE;
- myri10ge_unmap_rx_page(mgp->pdev, &mgp->rx_big.info[idx],
+ for (i = ss->rx_big.cnt; i < ss->rx_big.fill_cnt; i++) {
+ idx = i & ss->rx_big.mask;
+ if (i == ss->rx_big.fill_cnt - 1)
+ ss->rx_big.info[idx].page_offset = MYRI10GE_ALLOC_SIZE;
+ myri10ge_unmap_rx_page(mgp->pdev, &ss->rx_big.info[idx],
mgp->big_bytes);
- put_page(mgp->rx_big.info[idx].page);
+ put_page(ss->rx_big.info[idx].page);
}
- for (i = mgp->rx_small.cnt; i < mgp->rx_small.fill_cnt; i++) {
- idx = i & mgp->rx_small.mask;
- if (i == mgp->rx_small.fill_cnt - 1)
- mgp->rx_small.info[idx].page_offset =
+ for (i = ss->rx_small.cnt; i < ss->rx_small.fill_cnt; i++) {
+ idx = i & ss->rx_small.mask;
+ if (i == ss->rx_small.fill_cnt - 1)
+ ss->rx_small.info[idx].page_offset =
MYRI10GE_ALLOC_SIZE;
- myri10ge_unmap_rx_page(mgp->pdev, &mgp->rx_small.info[idx],
+ myri10ge_unmap_rx_page(mgp->pdev, &ss->rx_small.info[idx],
mgp->small_bytes + MXGEFW_PAD);
- put_page(mgp->rx_small.info[idx].page);
+ put_page(ss->rx_small.info[idx].page);
}
- tx = &mgp->tx;
+ tx = &ss->tx;
while (tx->done != tx->req) {
idx = tx->done & tx->mask;
skb = tx->info[idx].skb;
@@ -1714,7 +1804,7 @@
len = pci_unmap_len(&tx->info[idx], len);
pci_unmap_len_set(&tx->info[idx], len, 0);
if (skb) {
- mgp->stats.tx_dropped++;
+ ss->stats.tx_dropped++;
dev_kfree_skb_any(skb);
if (len)
pci_unmap_single(mgp->pdev,
@@ -1729,19 +1819,19 @@
PCI_DMA_TODEVICE);
}
}
- kfree(mgp->rx_big.info);
+ kfree(ss->rx_big.info);
- kfree(mgp->rx_small.info);
+ kfree(ss->rx_small.info);
- kfree(mgp->tx.info);
+ kfree(ss->tx.info);
- kfree(mgp->rx_big.shadow);
+ kfree(ss->rx_big.shadow);
- kfree(mgp->rx_small.shadow);
+ kfree(ss->rx_small.shadow);
- kfree(mgp->tx.req_bytes);
- mgp->tx.req_bytes = NULL;
- mgp->tx.req_list = NULL;
+ kfree(ss->tx.req_bytes);
+ ss->tx.req_bytes = NULL;
+ ss->tx.req_list = NULL;
}
static int myri10ge_request_irq(struct myri10ge_priv *mgp)
@@ -1840,13 +1930,11 @@
static int myri10ge_open(struct net_device *dev)
{
- struct myri10ge_priv *mgp;
+ struct myri10ge_priv *mgp = netdev_priv(dev);
struct myri10ge_cmd cmd;
struct net_lro_mgr *lro_mgr;
int status, big_pow2;
- mgp = netdev_priv(dev);
-
if (mgp->running != MYRI10GE_ETH_STOPPED)
return -EBUSY;
@@ -1883,16 +1971,16 @@
/* get the lanai pointers to the send and receive rings */
status |= myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_SEND_OFFSET, &cmd, 0);
- mgp->tx.lanai =
+ mgp->ss.tx.lanai =
(struct mcp_kreq_ether_send __iomem *)(mgp->sram + cmd.data0);
status |=
myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_SMALL_RX_OFFSET, &cmd, 0);
- mgp->rx_small.lanai =
+ mgp->ss.rx_small.lanai =
(struct mcp_kreq_ether_recv __iomem *)(mgp->sram + cmd.data0);
status |= myri10ge_send_cmd(mgp, MXGEFW_CMD_GET_BIG_RX_OFFSET, &cmd, 0);
- mgp->rx_big.lanai =
+ mgp->ss.rx_big.lanai =
(struct mcp_kreq_ether_recv __iomem *)(mgp->sram + cmd.data0);
if (status != 0) {
@@ -1904,15 +1992,15 @@
}
if (myri10ge_wcfifo && mgp->wc_enabled) {
- mgp->tx.wc_fifo = (u8 __iomem *) mgp->sram + MXGEFW_ETH_SEND_4;
- mgp->rx_small.wc_fifo =
+ mgp->ss.tx.wc_fifo = (u8 __iomem *) mgp->sram + MXGEFW_ETH_SEND_4;
+ mgp->ss.rx_small.wc_fifo =
(u8 __iomem *) mgp->sram + MXGEFW_ETH_RECV_SMALL;
- mgp->rx_big.wc_fifo =
+ mgp->ss.rx_big.wc_fifo =
(u8 __iomem *) mgp->sram + MXGEFW_ETH_RECV_BIG;
} else {
- mgp->tx.wc_fifo = NULL;
- mgp->rx_small.wc_fifo = NULL;
- mgp->rx_big.wc_fifo = NULL;
+ mgp->ss.tx.wc_fifo = NULL;
+ mgp->ss.rx_small.wc_fifo = NULL;
+ mgp->ss.rx_big.wc_fifo = NULL;
}
/* Firmware needs the big buff size as a power of 2. Lie and
@@ -1929,7 +2017,7 @@
mgp->big_bytes = big_pow2;
}
- status = myri10ge_allocate_rings(dev);
+ status = myri10ge_allocate_rings(&mgp->ss);
if (status != 0)
goto abort_with_irq;
@@ -1948,12 +2036,12 @@
goto abort_with_rings;
}
- cmd.data0 = MYRI10GE_LOWPART_TO_U32(mgp->fw_stats_bus);
- cmd.data1 = MYRI10GE_HIGHPART_TO_U32(mgp->fw_stats_bus);
+ cmd.data0 = MYRI10GE_LOWPART_TO_U32(mgp->ss.fw_stats_bus);
+ cmd.data1 = MYRI10GE_HIGHPART_TO_U32(mgp->ss.fw_stats_bus);
cmd.data2 = sizeof(struct mcp_irq_data);
status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_STATS_DMA_V2, &cmd, 0);
if (status == -ENOSYS) {
- dma_addr_t bus = mgp->fw_stats_bus;
+ dma_addr_t bus = mgp->ss.fw_stats_bus;
bus += offsetof(struct mcp_irq_data, send_done_count);
cmd.data0 = MYRI10GE_LOWPART_TO_U32(bus);
cmd.data1 = MYRI10GE_HIGHPART_TO_U32(bus);
@@ -1974,20 +2062,20 @@
mgp->link_state = ~0U;
mgp->rdma_tags_available = 15;
- lro_mgr = &mgp->rx_done.lro_mgr;
+ lro_mgr = &mgp->ss.rx_done.lro_mgr;
lro_mgr->dev = dev;
lro_mgr->features = LRO_F_NAPI;
lro_mgr->ip_summed = CHECKSUM_COMPLETE;
lro_mgr->ip_summed_aggr = CHECKSUM_UNNECESSARY;
lro_mgr->max_desc = MYRI10GE_MAX_LRO_DESCRIPTORS;
- lro_mgr->lro_arr = mgp->rx_done.lro_desc;
+ lro_mgr->lro_arr = mgp->ss.rx_done.lro_desc;
lro_mgr->get_frag_header = myri10ge_get_frag_header;
lro_mgr->max_aggr = myri10ge_lro_max_pkts;
lro_mgr->frag_align_pad = 2;
if (lro_mgr->max_aggr > MAX_SKB_FRAGS)
lro_mgr->max_aggr = MAX_SKB_FRAGS;
- napi_enable(&mgp->napi); /* must happen prior to any irq */
+ napi_enable(&mgp->ss.napi); /* must happen prior to any irq */
status = myri10ge_send_cmd(mgp, MXGEFW_CMD_ETHERNET_UP, &cmd, 0);
if (status) {
@@ -1996,8 +2084,8 @@
goto abort_with_rings;
}
- mgp->wake_queue = 0;
- mgp->stop_queue = 0;
+ mgp->ss.tx.wake_queue = 0;
+ mgp->ss.tx.stop_queue = 0;
mgp->running = MYRI10GE_ETH_RUNNING;
mgp->watchdog_timer.expires = jiffies + myri10ge_watchdog_timeout * HZ;
add_timer(&mgp->watchdog_timer);
@@ -2005,7 +2093,7 @@
return 0;
abort_with_rings:
- myri10ge_free_rings(dev);
+ myri10ge_free_rings(&mgp->ss);
abort_with_irq:
myri10ge_free_irq(mgp);
@@ -2017,21 +2105,19 @@
static int myri10ge_close(struct net_device *dev)
{
- struct myri10ge_priv *mgp;
+ struct myri10ge_priv *mgp = netdev_priv(dev);
struct myri10ge_cmd cmd;
int status, old_down_cnt;
- mgp = netdev_priv(dev);
-
if (mgp->running != MYRI10GE_ETH_RUNNING)
return 0;
- if (mgp->tx.req_bytes == NULL)
+ if (mgp->ss.tx.req_bytes == NULL)
return 0;
del_timer_sync(&mgp->watchdog_timer);
mgp->running = MYRI10GE_ETH_STOPPING;
- napi_disable(&mgp->napi);
+ napi_disable(&mgp->ss.napi);
netif_carrier_off(dev);
netif_stop_queue(dev);
old_down_cnt = mgp->down_cnt;
@@ -2047,7 +2133,7 @@
netif_tx_disable(dev);
myri10ge_free_irq(mgp);
- myri10ge_free_rings(dev);
+ myri10ge_free_rings(&mgp->ss);
mgp->running = MYRI10GE_ETH_STOPPED;
return 0;
@@ -2143,7 +2229,7 @@
/*
* Transmit a packet. We need to split the packet so that a single
- * segment does not cross myri10ge->tx.boundary, so this makes segment
+ * segment does not cross myri10ge->tx_boundary, so this makes segment
* counting tricky. So rather than try to count segments up front, we
* just give up if there are too few segments to hold a reasonably
* fragmented packet currently available. If we run
@@ -2154,8 +2240,9 @@
static int myri10ge_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct myri10ge_priv *mgp = netdev_priv(dev);
+ struct myri10ge_slice_state *ss;
struct mcp_kreq_ether_send *req;
- struct myri10ge_tx_buf *tx = &mgp->tx;
+ struct myri10ge_tx_buf *tx;
struct skb_frag_struct *frag;
dma_addr_t bus;
u32 low;
@@ -2166,6 +2253,9 @@
int cum_len, seglen, boundary, rdma_count;
u8 flags, odd_flag;
+ /* always transmit through slot 0 */
+ ss = &mgp->ss;
+ tx = &ss->tx;
again:
req = tx->req_list;
avail = tx->mask - 1 - (tx->req - tx->done);
@@ -2180,7 +2270,7 @@
if ((unlikely(avail < max_segments))) {
/* we are out of transmit resources */
- mgp->stop_queue++;
+ tx->stop_queue++;
netif_stop_queue(dev);
return 1;
}
@@ -2242,7 +2332,7 @@
if (skb_padto(skb, ETH_ZLEN)) {
/* The packet is gone, so we must
* return 0 */
- mgp->stats.tx_dropped += 1;
+ ss->stats.tx_dropped += 1;
return 0;
}
/* adjust the len to account for the zero pad
@@ -2284,7 +2374,7 @@
while (1) {
/* Break the SKB or Fragment up into pieces which
- * do not cross mgp->tx.boundary */
+ * do not cross mgp->tx_boundary */
low = MYRI10GE_LOWPART_TO_U32(bus);
high_swapped = htonl(MYRI10GE_HIGHPART_TO_U32(bus));
while (len) {
@@ -2294,7 +2384,8 @@
if (unlikely(count == max_segments))
goto abort_linearize;
- boundary = (low + tx->boundary) & ~(tx->boundary - 1);
+ boundary =
+ (low + mgp->tx_boundary) & ~(mgp->tx_boundary - 1);
seglen = boundary - low;
if (seglen > len)
seglen = len;
@@ -2378,7 +2469,7 @@
myri10ge_submit_req_wc(tx, tx->req_list, count);
tx->pkt_start++;
if ((avail - count) < MXGEFW_MAX_SEND_DESC) {
- mgp->stop_queue++;
+ tx->stop_queue++;
netif_stop_queue(dev);
}
dev->trans_start = jiffies;
@@ -2420,12 +2511,12 @@
if (skb_linearize(skb))
goto drop;
- mgp->tx_linearized++;
+ tx->linearized++;
goto again;
drop:
dev_kfree_skb_any(skb);
- mgp->stats.tx_dropped += 1;
+ ss->stats.tx_dropped += 1;
return 0;
}
@@ -2433,7 +2524,7 @@
static int myri10ge_sw_tso(struct sk_buff *skb, struct net_device *dev)
{
struct sk_buff *segs, *curr;
- struct myri10ge_priv *mgp = dev->priv;
+ struct myri10ge_priv *mgp = netdev_priv(dev);
int status;
segs = skb_gso_segment(skb, dev->features & ~NETIF_F_TSO6);
@@ -2473,14 +2564,13 @@
static void myri10ge_set_multicast_list(struct net_device *dev)
{
+ struct myri10ge_priv *mgp = netdev_priv(dev);
struct myri10ge_cmd cmd;
- struct myri10ge_priv *mgp;
struct dev_mc_list *mc_list;
__be32 data[2] = { 0, 0 };
int err;
DECLARE_MAC_BUF(mac);
- mgp = netdev_priv(dev);
/* can be called from atomic contexts,
* pass 1 to force atomicity in myri10ge_send_cmd() */
myri10ge_change_promisc(mgp, dev->flags & IFF_PROMISC, 1);
@@ -2616,13 +2706,14 @@
ext_type = (val & PCI_EXP_FLAGS_TYPE) >> 4;
if (ext_type != PCI_EXP_TYPE_ROOT_PORT) {
if (myri10ge_ecrc_enable > 1) {
- struct pci_dev *old_bridge = bridge;
+ struct pci_dev *prev_bridge, *old_bridge = bridge;
/* Walk the hierarchy up to the root port
* where ECRC has to be enabled */
do {
+ prev_bridge = bridge;
bridge = bridge->bus->self;
- if (!bridge) {
+ if (!bridge || prev_bridge == bridge) {
dev_err(dev,
"Failed to find root port"
" to force ECRC\n");
@@ -2681,9 +2772,9 @@
* already been enabled, then it must use a firmware image which works
* around unaligned completion packets (myri10ge_ethp_z8e.dat), and it
* should also ensure that it never gives the device a Read-DMA which is
- * larger than 2KB by setting the tx.boundary to 2KB. If ECRC is
+ * larger than 2KB by setting the tx_boundary to 2KB. If ECRC is
* enabled, then the driver should use the aligned (myri10ge_eth_z8e.dat)
- * firmware image, and set tx.boundary to 4KB.
+ * firmware image, and set tx_boundary to 4KB.
*/
static void myri10ge_firmware_probe(struct myri10ge_priv *mgp)
@@ -2692,7 +2783,7 @@
struct device *dev = &pdev->dev;
int status;
- mgp->tx.boundary = 4096;
+ mgp->tx_boundary = 4096;
/*
* Verify the max read request size was set to 4KB
* before trying the test with 4KB.
@@ -2704,7 +2795,7 @@
}
if (status != 4096) {
dev_warn(dev, "Max Read Request size != 4096 (%d)\n", status);
- mgp->tx.boundary = 2048;
+ mgp->tx_boundary = 2048;
}
/*
* load the optimized firmware (which assumes aligned PCIe
@@ -2737,7 +2828,7 @@
"Please install up to date fw\n");
abort:
/* fall back to using the unaligned firmware */
- mgp->tx.boundary = 2048;
+ mgp->tx_boundary = 2048;
mgp->fw_name = myri10ge_fw_unaligned;
}
@@ -2758,7 +2849,7 @@
if (link_width < 8) {
dev_info(&mgp->pdev->dev, "PCIE x%d Link\n",
link_width);
- mgp->tx.boundary = 4096;
+ mgp->tx_boundary = 4096;
mgp->fw_name = myri10ge_fw_aligned;
} else {
myri10ge_firmware_probe(mgp);
@@ -2767,12 +2858,12 @@
if (myri10ge_force_firmware == 1) {
dev_info(&mgp->pdev->dev,
"Assuming aligned completions (forced)\n");
- mgp->tx.boundary = 4096;
+ mgp->tx_boundary = 4096;
mgp->fw_name = myri10ge_fw_aligned;
} else {
dev_info(&mgp->pdev->dev,
"Assuming unaligned completions (forced)\n");
- mgp->tx.boundary = 2048;
+ mgp->tx_boundary = 2048;
mgp->fw_name = myri10ge_fw_unaligned;
}
}
@@ -2889,6 +2980,7 @@
{
struct myri10ge_priv *mgp =
container_of(work, struct myri10ge_priv, watchdog_work);
+ struct myri10ge_tx_buf *tx;
u32 reboot;
int status;
u16 cmd, vendor;
@@ -2938,15 +3030,16 @@
printk(KERN_ERR "myri10ge: %s: device timeout, resetting\n",
mgp->dev->name);
+ tx = &mgp->ss.tx;
printk(KERN_INFO "myri10ge: %s: %d %d %d %d %d\n",
- mgp->dev->name, mgp->tx.req, mgp->tx.done,
- mgp->tx.pkt_start, mgp->tx.pkt_done,
- (int)ntohl(mgp->fw_stats->send_done_count));
+ mgp->dev->name, tx->req, tx->done,
+ tx->pkt_start, tx->pkt_done,
+ (int)ntohl(mgp->ss.fw_stats->send_done_count));
msleep(2000);
printk(KERN_INFO "myri10ge: %s: %d %d %d %d %d\n",
- mgp->dev->name, mgp->tx.req, mgp->tx.done,
- mgp->tx.pkt_start, mgp->tx.pkt_done,
- (int)ntohl(mgp->fw_stats->send_done_count));
+ mgp->dev->name, tx->req, tx->done,
+ tx->pkt_start, tx->pkt_done,
+ (int)ntohl(mgp->ss.fw_stats->send_done_count));
}
rtnl_lock();
myri10ge_close(mgp->dev);
@@ -2969,28 +3062,31 @@
static void myri10ge_watchdog_timer(unsigned long arg)
{
struct myri10ge_priv *mgp;
+ struct myri10ge_slice_state *ss;
u32 rx_pause_cnt;
mgp = (struct myri10ge_priv *)arg;
- if (mgp->rx_small.watchdog_needed) {
- myri10ge_alloc_rx_pages(mgp, &mgp->rx_small,
- mgp->small_bytes + MXGEFW_PAD, 1);
- if (mgp->rx_small.fill_cnt - mgp->rx_small.cnt >=
- myri10ge_fill_thresh)
- mgp->rx_small.watchdog_needed = 0;
- }
- if (mgp->rx_big.watchdog_needed) {
- myri10ge_alloc_rx_pages(mgp, &mgp->rx_big, mgp->big_bytes, 1);
- if (mgp->rx_big.fill_cnt - mgp->rx_big.cnt >=
- myri10ge_fill_thresh)
- mgp->rx_big.watchdog_needed = 0;
- }
- rx_pause_cnt = ntohl(mgp->fw_stats->dropped_pause);
+ rx_pause_cnt = ntohl(mgp->ss.fw_stats->dropped_pause);
- if (mgp->tx.req != mgp->tx.done &&
- mgp->tx.done == mgp->watchdog_tx_done &&
- mgp->watchdog_tx_req != mgp->watchdog_tx_done) {
+ ss = &mgp->ss;
+ if (ss->rx_small.watchdog_needed) {
+ myri10ge_alloc_rx_pages(mgp, &ss->rx_small,
+ mgp->small_bytes + MXGEFW_PAD, 1);
+ if (ss->rx_small.fill_cnt - ss->rx_small.cnt >=
+ myri10ge_fill_thresh)
+ ss->rx_small.watchdog_needed = 0;
+ }
+ if (ss->rx_big.watchdog_needed) {
+ myri10ge_alloc_rx_pages(mgp, &ss->rx_big, mgp->big_bytes, 1);
+ if (ss->rx_big.fill_cnt - ss->rx_big.cnt >=
+ myri10ge_fill_thresh)
+ ss->rx_big.watchdog_needed = 0;
+ }
+
+ if (ss->tx.req != ss->tx.done &&
+ ss->tx.done == ss->watchdog_tx_done &&
+ ss->watchdog_tx_req != ss->watchdog_tx_done) {
/* nic seems like it might be stuck.. */
if (rx_pause_cnt != mgp->watchdog_pause) {
if (net_ratelimit())
@@ -3005,8 +3101,8 @@
/* rearm timer */
mod_timer(&mgp->watchdog_timer,
jiffies + myri10ge_watchdog_timeout * HZ);
- mgp->watchdog_tx_done = mgp->tx.done;
- mgp->watchdog_tx_req = mgp->tx.req;
+ ss->watchdog_tx_done = ss->tx.done;
+ ss->watchdog_tx_req = ss->tx.req;
mgp->watchdog_pause = rx_pause_cnt;
}
@@ -3030,7 +3126,7 @@
mgp = netdev_priv(netdev);
mgp->dev = netdev;
- netif_napi_add(netdev, &mgp->napi, myri10ge_poll, myri10ge_napi_weight);
+ netif_napi_add(netdev, &mgp->ss.napi, myri10ge_poll, myri10ge_napi_weight);
mgp->pdev = pdev;
mgp->csum_flag = MXGEFW_FLAGS_CKSUM;
mgp->pause = myri10ge_flow_control;
@@ -3076,9 +3172,9 @@
if (mgp->cmd == NULL)
goto abort_with_netdev;
- mgp->fw_stats = dma_alloc_coherent(&pdev->dev, sizeof(*mgp->fw_stats),
- &mgp->fw_stats_bus, GFP_KERNEL);
- if (mgp->fw_stats == NULL)
+ mgp->ss.fw_stats = dma_alloc_coherent(&pdev->dev, sizeof(*mgp->ss.fw_stats),
+ &mgp->ss.fw_stats_bus, GFP_KERNEL);
+ if (mgp->ss.fw_stats == NULL)
goto abort_with_cmd;
mgp->board_span = pci_resource_len(pdev, 0);
@@ -3118,12 +3214,12 @@
netdev->dev_addr[i] = mgp->mac_addr[i];
/* allocate rx done ring */
- bytes = myri10ge_max_intr_slots * sizeof(*mgp->rx_done.entry);
- mgp->rx_done.entry = dma_alloc_coherent(&pdev->dev, bytes,
- &mgp->rx_done.bus, GFP_KERNEL);
- if (mgp->rx_done.entry == NULL)
+ bytes = mgp->max_intr_slots * sizeof(*mgp->ss.rx_done.entry);
+ mgp->ss.rx_done.entry = dma_alloc_coherent(&pdev->dev, bytes,
+ &mgp->ss.rx_done.bus, GFP_KERNEL);
+ if (mgp->ss.rx_done.entry == NULL)
goto abort_with_ioremap;
- memset(mgp->rx_done.entry, 0, bytes);
+ memset(mgp->ss.rx_done.entry, 0, bytes);
myri10ge_select_firmware(mgp);
@@ -3183,7 +3279,7 @@
}
dev_info(dev, "%s IRQ %d, tx bndry %d, fw %s, WC %s\n",
(mgp->msi_enabled ? "MSI" : "xPIC"),
- netdev->irq, mgp->tx.boundary, mgp->fw_name,
+ netdev->irq, mgp->tx_boundary, mgp->fw_name,
(mgp->wc_enabled ? "Enabled" : "Disabled"));
return 0;
@@ -3195,9 +3291,9 @@
myri10ge_dummy_rdma(mgp, 0);
abort_with_rx_done:
- bytes = myri10ge_max_intr_slots * sizeof(*mgp->rx_done.entry);
+ bytes = mgp->max_intr_slots * sizeof(*mgp->ss.rx_done.entry);
dma_free_coherent(&pdev->dev, bytes,
- mgp->rx_done.entry, mgp->rx_done.bus);
+ mgp->ss.rx_done.entry, mgp->ss.rx_done.bus);
abort_with_ioremap:
iounmap(mgp->sram);
@@ -3207,8 +3303,8 @@
if (mgp->mtrr >= 0)
mtrr_del(mgp->mtrr, mgp->iomem_base, mgp->board_span);
#endif
- dma_free_coherent(&pdev->dev, sizeof(*mgp->fw_stats),
- mgp->fw_stats, mgp->fw_stats_bus);
+ dma_free_coherent(&pdev->dev, sizeof(*mgp->ss.fw_stats),
+ mgp->ss.fw_stats, mgp->ss.fw_stats_bus);
abort_with_cmd:
dma_free_coherent(&pdev->dev, sizeof(*mgp->cmd),
@@ -3246,9 +3342,9 @@
/* avoid a memory leak */
pci_restore_state(pdev);
- bytes = myri10ge_max_intr_slots * sizeof(*mgp->rx_done.entry);
+ bytes = mgp->max_intr_slots * sizeof(*mgp->ss.rx_done.entry);
dma_free_coherent(&pdev->dev, bytes,
- mgp->rx_done.entry, mgp->rx_done.bus);
+ mgp->ss.rx_done.entry, mgp->ss.rx_done.bus);
iounmap(mgp->sram);
@@ -3256,8 +3352,8 @@
if (mgp->mtrr >= 0)
mtrr_del(mgp->mtrr, mgp->iomem_base, mgp->board_span);
#endif
- dma_free_coherent(&pdev->dev, sizeof(*mgp->fw_stats),
- mgp->fw_stats, mgp->fw_stats_bus);
+ dma_free_coherent(&pdev->dev, sizeof(*mgp->ss.fw_stats),
+ mgp->ss.fw_stats, mgp->ss.fw_stats_bus);
dma_free_coherent(&pdev->dev, sizeof(*mgp->cmd),
mgp->cmd, mgp->cmd_bus);
diff --git a/drivers/net/myri10ge/myri10ge_mcp.h b/drivers/net/myri10ge/myri10ge_mcp.h
index 58e5717..fdbeeee 100644
--- a/drivers/net/myri10ge/myri10ge_mcp.h
+++ b/drivers/net/myri10ge/myri10ge_mcp.h
@@ -10,7 +10,7 @@
__be32 low;
};
-/* 4 Bytes. 8 Bytes for NDIS drivers. */
+/* 4 Bytes */
struct mcp_slot {
__sum16 checksum;
__be16 length;
@@ -144,6 +144,7 @@
* a power of 2 number of entries. */
MXGEFW_CMD_SET_INTRQ_SIZE, /* in bytes */
+#define MXGEFW_CMD_SET_INTRQ_SIZE_FLAG_NO_STRICT_SIZE_CHECK (1 << 31)
/* command to bring ethernet interface up. Above parameters
* (plus mtu & mac address) must have been exchanged prior
@@ -221,10 +222,14 @@
MXGEFW_CMD_GET_MAX_RSS_QUEUES,
MXGEFW_CMD_ENABLE_RSS_QUEUES,
/* data0 = number of slices n (0, 1, ..., n-1) to enable
- * data1 = interrupt mode. 0=share one INTx/MSI, 1=use one MSI-X per queue.
+ * data1 = interrupt mode.
+ * 0=share one INTx/MSI, 1=use one MSI-X per queue.
* If all queues share one interrupt, the driver must have set
* RSS_SHARED_INTERRUPT_DMA before enabling queues.
*/
+#define MXGEFW_SLICE_INTR_MODE_SHARED 0
+#define MXGEFW_SLICE_INTR_MODE_ONE_PER_SLICE 1
+
MXGEFW_CMD_GET_RSS_SHARED_INTERRUPT_MASK_OFFSET,
MXGEFW_CMD_SET_RSS_SHARED_INTERRUPT_DMA,
/* data0, data1 = bus address lsw, msw */
@@ -241,10 +246,14 @@
* 0: disable rss. nic does not distribute receive packets.
* 1: enable rss. nic distributes receive packets among queues.
* data1 = hash type
- * 1: IPV4
- * 2: TCP_IPV4
- * 3: IPV4 | TCP_IPV4
+ * 1: IPV4 (required by RSS)
+ * 2: TCP_IPV4 (required by RSS)
+ * 3: IPV4 | TCP_IPV4 (required by RSS)
+ * 4: source port
*/
+#define MXGEFW_RSS_HASH_TYPE_IPV4 0x1
+#define MXGEFW_RSS_HASH_TYPE_TCP_IPV4 0x2
+#define MXGEFW_RSS_HASH_TYPE_SRC_PORT 0x4
MXGEFW_CMD_GET_MAX_TSO6_HDR_SIZE,
/* Return data = the max. size of the entire headers of a IPv6 TSO packet.
@@ -260,6 +269,8 @@
* 0: Linux/FreeBSD style (NIC default)
* 1: NDIS/NetBSD style
*/
+#define MXGEFW_TSO_MODE_LINUX 0
+#define MXGEFW_TSO_MODE_NDIS 1
MXGEFW_CMD_MDIO_READ,
/* data0 = dev_addr (PMA/PMD or PCS ...), data1 = register/addr */
@@ -286,6 +297,38 @@
/* Return data = NIC memory offset of mcp_vpump_public_global */
MXGEFW_CMD_RESET_VPUMP,
/* Resets the VPUMP state */
+
+ MXGEFW_CMD_SET_RSS_MCP_SLOT_TYPE,
+ /* data0 = mcp_slot type to use.
+ * 0 = the default 4B mcp_slot
+ * 1 = 8B mcp_slot_8
+ */
+#define MXGEFW_RSS_MCP_SLOT_TYPE_MIN 0
+#define MXGEFW_RSS_MCP_SLOT_TYPE_WITH_HASH 1
+
+ MXGEFW_CMD_SET_THROTTLE_FACTOR,
+ /* set the throttle factor for ethp_z8e
+ * data0 = throttle_factor
+ * throttle_factor = 256 * pcie-raw-speed / tx_speed
+ * tx_speed = 256 * pcie-raw-speed / throttle_factor
+ *
+ * For PCI-E x8: pcie-raw-speed == 16Gb/s
+ * For PCI-E x4: pcie-raw-speed == 8Gb/s
+ *
+ * ex1: throttle_factor == 0x1a0 (416), tx_speed == 1.23GB/s == 9.846 Gb/s
+ * ex2: throttle_factor == 0x200 (512), tx_speed == 1.0GB/s == 8 Gb/s
+ *
+ * with tx_boundary == 2048, max-throttle-factor == 8191 => min-speed == 500Mb/s
+ * with tx_boundary == 4096, max-throttle-factor == 4095 => min-speed == 1Gb/s
+ */
+
+ MXGEFW_CMD_VPUMP_UP,
+ /* Allocates VPump Connection, Send Request and Zero copy buffer address tables */
+ MXGEFW_CMD_GET_VPUMP_CLK,
+ /* Get the lanai clock */
+
+ MXGEFW_CMD_GET_DCA_OFFSET,
+ /* offset of dca control for WDMAs */
};
enum myri10ge_mcp_cmd_status {
@@ -302,7 +345,8 @@
MXGEFW_CMD_ERROR_UNALIGNED,
MXGEFW_CMD_ERROR_NO_MDIO,
MXGEFW_CMD_ERROR_XFP_FAILURE,
- MXGEFW_CMD_ERROR_XFP_ABSENT
+ MXGEFW_CMD_ERROR_XFP_ABSENT,
+ MXGEFW_CMD_ERROR_BAD_PCIE_LINK
};
#define MXGEFW_OLD_IRQ_DATA_LEN 40
diff --git a/drivers/net/myri10ge/myri10ge_mcp_gen_header.h b/drivers/net/myri10ge/myri10ge_mcp_gen_header.h
index 16a810d..07d65c2 100644
--- a/drivers/net/myri10ge/myri10ge_mcp_gen_header.h
+++ b/drivers/net/myri10ge/myri10ge_mcp_gen_header.h
@@ -1,30 +1,6 @@
#ifndef __MYRI10GE_MCP_GEN_HEADER_H__
#define __MYRI10GE_MCP_GEN_HEADER_H__
-/* this file define a standard header used as a first entry point to
- * exchange information between firmware/driver and driver. The
- * header structure can be anywhere in the mcp. It will usually be in
- * the .data section, because some fields needs to be initialized at
- * compile time.
- * The 32bit word at offset MX_HEADER_PTR_OFFSET in the mcp must
- * contains the location of the header.
- *
- * Typically a MCP will start with the following:
- * .text
- * .space 52 ! to help catch MEMORY_INT errors
- * bt start ! jump to real code
- * nop
- * .long _gen_mcp_header
- *
- * The source will have a definition like:
- *
- * mcp_gen_header_t gen_mcp_header = {
- * .header_length = sizeof(mcp_gen_header_t),
- * .mcp_type = MCP_TYPE_XXX,
- * .version = "something $Id: mcp_gen_header.h,v 1.2 2006/05/13 10:04:35 bgoglin Exp $",
- * .mcp_globals = (unsigned)&Globals
- * };
- */
#define MCP_HEADER_PTR_OFFSET 0x3c
@@ -32,13 +8,14 @@
#define MCP_TYPE_PCIE 0x70636965 /* "PCIE" pcie-only MCP */
#define MCP_TYPE_ETH 0x45544820 /* "ETH " */
#define MCP_TYPE_MCP0 0x4d435030 /* "MCP0" */
+#define MCP_TYPE_DFLT 0x20202020 /* " " */
struct mcp_gen_header {
/* the first 4 fields are filled at compile time */
unsigned header_length;
__be32 mcp_type;
char version[128];
- unsigned mcp_globals; /* pointer to mcp-type specific structure */
+ unsigned mcp_private; /* pointer to mcp-type specific structure */
/* filled by the MCP at run-time */
unsigned sram_size;
@@ -53,6 +30,18 @@
*
* Never remove any field. Keep everything naturally align.
*/
+
+ /* Specifies if the running mcp is mcp0, 1, or 2. */
+ unsigned char mcp_index;
+ unsigned char disable_rabbit;
+ unsigned char unaligned_tlp;
+ unsigned char pad1;
+ unsigned counters_addr;
+ unsigned copy_block_info; /* for small mcps loaded with "lload -d" */
+ unsigned short handoff_id_major; /* must be equal */
+ unsigned short handoff_id_caps; /* bitfield: new mcp must have superset */
+ unsigned msix_table_addr; /* start address of msix table in firmware */
+ /* 8 */
};
#endif /* __MYRI10GE_MCP_GEN_HEADER_H__ */
diff --git a/drivers/net/niu.c b/drivers/net/niu.c
index 57cfd72..918f802 100644
--- a/drivers/net/niu.c
+++ b/drivers/net/niu.c
@@ -865,7 +865,6 @@
return 0;
}
-
static int link_status_10g_serdes(struct niu *np, int *link_up_p)
{
unsigned long flags;
@@ -900,7 +899,6 @@
return 0;
}
-
static int link_status_1g_rgmii(struct niu *np, int *link_up_p)
{
struct niu_link_config *lp = &np->link_config;
@@ -957,7 +955,6 @@
return err;
}
-
static int bcm8704_reset(struct niu *np)
{
int err, limit;
@@ -1357,8 +1354,6 @@
return 0;
}
-
-
static int xcvr_init_1g_rgmii(struct niu *np)
{
int err;
@@ -1419,7 +1414,6 @@
return 0;
}
-
static int mii_init_common(struct niu *np)
{
struct niu_link_config *lp = &np->link_config;
@@ -7008,31 +7002,20 @@
return 0;
}
-/* niu board models have a trailing dash version incremented
- * with HW rev change. Need to ingnore the dash version while
- * checking for match
- *
- * for example, for the 10G card the current vpd.board_model
- * is 501-5283-04, of which -04 is the dash version and have
- * to be ignored
- */
-static int niu_board_model_match(struct niu *np, const char *model)
-{
- return !strncmp(np->vpd.board_model, model, strlen(model));
-}
-
static int niu_pci_vpd_get_nports(struct niu *np)
{
int ports = 0;
- if ((niu_board_model_match(np, NIU_QGC_LP_BM_STR)) ||
- (niu_board_model_match(np, NIU_QGC_PEM_BM_STR)) ||
- (niu_board_model_match(np, NIU_ALONSO_BM_STR))) {
+ if ((!strcmp(np->vpd.model, NIU_QGC_LP_MDL_STR)) ||
+ (!strcmp(np->vpd.model, NIU_QGC_PEM_MDL_STR)) ||
+ (!strcmp(np->vpd.model, NIU_MARAMBA_MDL_STR)) ||
+ (!strcmp(np->vpd.model, NIU_KIMI_MDL_STR)) ||
+ (!strcmp(np->vpd.model, NIU_ALONSO_MDL_STR))) {
ports = 4;
- } else if ((niu_board_model_match(np, NIU_2XGF_LP_BM_STR)) ||
- (niu_board_model_match(np, NIU_2XGF_PEM_BM_STR)) ||
- (niu_board_model_match(np, NIU_FOXXY_BM_STR)) ||
- (niu_board_model_match(np, NIU_2XGF_MRVL_BM_STR))) {
+ } else if ((!strcmp(np->vpd.model, NIU_2XGF_LP_MDL_STR)) ||
+ (!strcmp(np->vpd.model, NIU_2XGF_PEM_MDL_STR)) ||
+ (!strcmp(np->vpd.model, NIU_FOXXY_MDL_STR)) ||
+ (!strcmp(np->vpd.model, NIU_2XGF_MRVL_MDL_STR))) {
ports = 2;
}
@@ -7053,8 +7036,8 @@
return;
}
- if (!strcmp(np->vpd.model, "SUNW,CP3220") ||
- !strcmp(np->vpd.model, "SUNW,CP3260")) {
+ if (!strcmp(np->vpd.model, NIU_ALONSO_MDL_STR) ||
+ !strcmp(np->vpd.model, NIU_KIMI_MDL_STR)) {
np->flags |= NIU_FLAGS_10G;
np->flags &= ~NIU_FLAGS_FIBER;
np->flags |= NIU_FLAGS_XCVR_SERDES;
@@ -7065,7 +7048,7 @@
}
if (np->flags & NIU_FLAGS_10G)
np->mac_xcvr = MAC_XCVR_XPCS;
- } else if (niu_board_model_match(np, NIU_FOXXY_BM_STR)) {
+ } else if (!strcmp(np->vpd.model, NIU_FOXXY_MDL_STR)) {
np->flags |= (NIU_FLAGS_10G | NIU_FLAGS_FIBER |
NIU_FLAGS_HOTPLUG_PHY);
} else if (niu_phy_type_prop_decode(np, np->vpd.phy_type)) {
@@ -7541,8 +7524,8 @@
u32 val;
int err;
- if (!strcmp(np->vpd.model, "SUNW,CP3220") ||
- !strcmp(np->vpd.model, "SUNW,CP3260")) {
+ if (!strcmp(np->vpd.model, NIU_ALONSO_MDL_STR) ||
+ !strcmp(np->vpd.model, NIU_KIMI_MDL_STR)) {
num_10g = 0;
num_1g = 2;
parent->plat_type = PLAT_TYPE_ATCA_CP3220;
@@ -7551,7 +7534,7 @@
phy_encode(PORT_TYPE_1G, 1) |
phy_encode(PORT_TYPE_1G, 2) |
phy_encode(PORT_TYPE_1G, 3));
- } else if (niu_board_model_match(np, NIU_FOXXY_BM_STR)) {
+ } else if (!strcmp(np->vpd.model, NIU_FOXXY_MDL_STR)) {
num_10g = 2;
num_1g = 0;
parent->num_ports = 2;
@@ -7946,6 +7929,7 @@
struct device_node *dp;
const char *phy_type;
const u8 *mac_addr;
+ const char *model;
int prop_len;
if (np->parent->plat_type == PLAT_TYPE_NIU)
@@ -8000,6 +7984,11 @@
memcpy(dev->dev_addr, dev->perm_addr, dev->addr_len);
+ model = of_get_property(dp, "model", &prop_len);
+
+ if (model)
+ strcpy(np->vpd.model, model);
+
return 0;
#else
return -EINVAL;
diff --git a/drivers/net/niu.h b/drivers/net/niu.h
index 97ffbe1..12fd570 100644
--- a/drivers/net/niu.h
+++ b/drivers/net/niu.h
@@ -2946,6 +2946,15 @@
#define NIU_ALONSO_BM_STR "373-0202"
#define NIU_FOXXY_BM_STR "501-7961"
#define NIU_2XGF_MRVL_BM_STR "SK-6E82"
+#define NIU_QGC_LP_MDL_STR "SUNW,pcie-qgc"
+#define NIU_2XGF_LP_MDL_STR "SUNW,pcie-2xgf"
+#define NIU_QGC_PEM_MDL_STR "SUNW,pcie-qgc-pem"
+#define NIU_2XGF_PEM_MDL_STR "SUNW,pcie-2xgf-pem"
+#define NIU_ALONSO_MDL_STR "SUNW,CP3220"
+#define NIU_KIMI_MDL_STR "SUNW,CP3260"
+#define NIU_MARAMBA_MDL_STR "SUNW,pcie-neptune"
+#define NIU_FOXXY_MDL_STR "SUNW,pcie-rfem"
+#define NIU_2XGF_MRVL_MDL_STR "SysKonnect,pcie-2xgf"
#define NIU_VPD_MIN_MAJOR 3
#define NIU_VPD_MIN_MINOR 4
diff --git a/drivers/net/pcmcia/fmvj18x_cs.c b/drivers/net/pcmcia/fmvj18x_cs.c
index 8f328a0..a550c9b 100644
--- a/drivers/net/pcmcia/fmvj18x_cs.c
+++ b/drivers/net/pcmcia/fmvj18x_cs.c
@@ -391,7 +391,9 @@
cardtype = CONTEC;
break;
case MANFID_FUJITSU:
- if (link->card_id == PRODID_FUJITSU_MBH10302)
+ if (link->conf.ConfigBase == 0x0fe0)
+ cardtype = MBH10302;
+ else if (link->card_id == PRODID_FUJITSU_MBH10302)
/* RATOC REX-5588/9822/4886's PRODID are 0004(=MBH10302),
but these are MBH10304 based card. */
cardtype = MBH10304;
diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c
index d041f83..f6c4698 100644
--- a/drivers/net/pcmcia/xirc2ps_cs.c
+++ b/drivers/net/pcmcia/xirc2ps_cs.c
@@ -1461,22 +1461,25 @@
set_multicast_list(struct net_device *dev)
{
unsigned int ioaddr = dev->base_addr;
+ unsigned value;
SelectPage(0x42);
+ value = GetByte(XIRCREG42_SWC1) & 0xC0;
+
if (dev->flags & IFF_PROMISC) { /* snoop */
- PutByte(XIRCREG42_SWC1, 0x06); /* set MPE and PME */
+ PutByte(XIRCREG42_SWC1, value | 0x06); /* set MPE and PME */
} else if (dev->mc_count > 9 || (dev->flags & IFF_ALLMULTI)) {
- PutByte(XIRCREG42_SWC1, 0x02); /* set MPE */
+ PutByte(XIRCREG42_SWC1, value | 0x02); /* set MPE */
} else if (dev->mc_count) {
/* the chip can filter 9 addresses perfectly */
- PutByte(XIRCREG42_SWC1, 0x01);
+ PutByte(XIRCREG42_SWC1, value | 0x01);
SelectPage(0x40);
PutByte(XIRCREG40_CMD0, Offline);
set_addresses(dev);
SelectPage(0x40);
PutByte(XIRCREG40_CMD0, EnableRecv | Online);
} else { /* standard usage */
- PutByte(XIRCREG42_SWC1, 0x00);
+ PutByte(XIRCREG42_SWC1, value | 0x00);
}
SelectPage(0);
}
@@ -1722,6 +1725,7 @@
/* enable receiver and put the mac online */
if (full) {
+ set_multicast_list(dev);
SelectPage(0x40);
PutByte(XIRCREG40_CMD0, EnableRecv | Online);
}
diff --git a/drivers/net/pcnet32.c b/drivers/net/pcnet32.c
index a1c454d..1c89b97 100644
--- a/drivers/net/pcnet32.c
+++ b/drivers/net/pcnet32.c
@@ -325,7 +325,7 @@
static void pcnet32_get_regs(struct net_device *dev, struct ethtool_regs *regs,
void *ptr);
static void pcnet32_purge_tx_ring(struct net_device *dev);
-static int pcnet32_alloc_ring(struct net_device *dev, char *name);
+static int pcnet32_alloc_ring(struct net_device *dev, const char *name);
static void pcnet32_free_ring(struct net_device *dev);
static void pcnet32_check_media(struct net_device *dev, int verbose);
@@ -1983,7 +1983,7 @@
}
/* if any allocation fails, caller must also call pcnet32_free_ring */
-static int pcnet32_alloc_ring(struct net_device *dev, char *name)
+static int pcnet32_alloc_ring(struct net_device *dev, const char *name)
{
struct pcnet32_private *lp = netdev_priv(dev);
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
index 6bf9e76..6eb2d31 100644
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -5,7 +5,7 @@
menuconfig PHYLIB
tristate "PHY Device support and infrastructure"
depends on !S390
- depends on NET_ETHERNET && (BROKEN || !S390)
+ depends on NET_ETHERNET
help
Ethernet controllers are usually attached to PHY
devices. This option provides infrastructure for
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index ac3c01d..16a0e7d 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -207,6 +207,7 @@
return 0;
}
+EXPORT_SYMBOL(get_phy_id);
/**
* get_phy_device - reads the specified PHY device and returns its @phy_device struct
diff --git a/drivers/net/ppp_generic.c b/drivers/net/ppp_generic.c
index d3207c0..1f4ca2b 100644
--- a/drivers/net/ppp_generic.c
+++ b/drivers/net/ppp_generic.c
@@ -2458,6 +2458,7 @@
out3:
atomic_dec(&ppp_unit_count);
+ unregister_netdev(dev);
out2:
mutex_unlock(&all_ppp_mutex);
free_netdev(dev);
diff --git a/drivers/net/pppoe.c b/drivers/net/pppoe.c
index 58a26a4..bafb69b 100644
--- a/drivers/net/pppoe.c
+++ b/drivers/net/pppoe.c
@@ -341,12 +341,6 @@
struct pppox_sock *relay_po;
if (sk->sk_state & PPPOX_BOUND) {
- struct pppoe_hdr *ph = pppoe_hdr(skb);
- int len = ntohs(ph->length);
- skb_pull_rcsum(skb, sizeof(struct pppoe_hdr));
- if (pskb_trim_rcsum(skb, len))
- goto abort_kfree;
-
ppp_input(&po->chan, skb);
} else if (sk->sk_state & PPPOX_RELAY) {
relay_po = get_item_by_addr(&po->pppoe_relay);
@@ -357,7 +351,6 @@
if ((sk_pppox(relay_po)->sk_state & PPPOX_CONNECTED) == 0)
goto abort_put;
- skb_pull(skb, sizeof(struct pppoe_hdr));
if (!__pppoe_xmit(sk_pppox(relay_po), skb))
goto abort_put;
} else {
@@ -388,6 +381,7 @@
{
struct pppoe_hdr *ph;
struct pppox_sock *po;
+ int len;
if (!(skb = skb_share_check(skb, GFP_ATOMIC)))
goto out;
@@ -399,10 +393,21 @@
goto drop;
ph = pppoe_hdr(skb);
+ len = ntohs(ph->length);
+
+ skb_pull_rcsum(skb, sizeof(*ph));
+ if (skb->len < len)
+ goto drop;
po = get_item(ph->sid, eth_hdr(skb)->h_source, dev->ifindex);
- if (po != NULL)
- return sk_receive_skb(sk_pppox(po), skb, 0);
+ if (!po)
+ goto drop;
+
+ if (pskb_trim_rcsum(skb, len))
+ goto drop;
+
+ return sk_receive_skb(sk_pppox(po), skb, 0);
+
drop:
kfree_skb(skb);
out:
@@ -427,12 +432,12 @@
if (dev_net(dev) != &init_net)
goto abort;
- if (!pskb_may_pull(skb, sizeof(struct pppoe_hdr)))
- goto abort;
-
if (!(skb = skb_share_check(skb, GFP_ATOMIC)))
goto out;
+ if (!pskb_may_pull(skb, sizeof(struct pppoe_hdr)))
+ goto abort;
+
ph = pppoe_hdr(skb);
if (ph->code != PADT_CODE)
goto abort;
@@ -937,12 +942,10 @@
m->msg_namelen = 0;
if (skb) {
- struct pppoe_hdr *ph = pppoe_hdr(skb);
- const int len = ntohs(ph->length);
-
- error = memcpy_toiovec(m->msg_iov, (unsigned char *) &ph->tag[0], len);
+ total_len = min(total_len, skb->len);
+ error = skb_copy_datagram_iovec(skb, 0, m->msg_iov, total_len);
if (error == 0)
- error = len;
+ error = total_len;
}
kfree_skb(skb);
diff --git a/drivers/net/pppol2tp.c b/drivers/net/pppol2tp.c
index 244d783..f929882 100644
--- a/drivers/net/pppol2tp.c
+++ b/drivers/net/pppol2tp.c
@@ -240,12 +240,15 @@
if (sk == NULL)
return NULL;
+ sock_hold(sk);
session = (struct pppol2tp_session *)(sk->sk_user_data);
- if (session == NULL)
- return NULL;
+ if (session == NULL) {
+ sock_put(sk);
+ goto out;
+ }
BUG_ON(session->magic != L2TP_SESSION_MAGIC);
-
+out:
return session;
}
@@ -256,12 +259,15 @@
if (sk == NULL)
return NULL;
+ sock_hold(sk);
tunnel = (struct pppol2tp_tunnel *)(sk->sk_user_data);
- if (tunnel == NULL)
- return NULL;
+ if (tunnel == NULL) {
+ sock_put(sk);
+ goto out;
+ }
BUG_ON(tunnel->magic != L2TP_TUNNEL_MAGIC);
-
+out:
return tunnel;
}
@@ -716,12 +722,14 @@
session->stats.rx_errors++;
kfree_skb(skb);
sock_put(session->sock);
+ sock_put(sock);
return 0;
error:
/* Put UDP header back */
__skb_push(skb, sizeof(struct udphdr));
+ sock_put(sock);
no_tunnel:
return 1;
@@ -745,10 +753,13 @@
"%s: received %d bytes\n", tunnel->name, skb->len);
if (pppol2tp_recv_core(sk, skb))
- goto pass_up;
+ goto pass_up_put;
+ sock_put(sk);
return 0;
+pass_up_put:
+ sock_put(sk);
pass_up:
return 1;
}
@@ -772,14 +783,18 @@
err = 0;
skb = skb_recv_datagram(sk, flags & ~MSG_DONTWAIT,
flags & MSG_DONTWAIT, &err);
- if (skb) {
- err = memcpy_toiovec(msg->msg_iov, (unsigned char *) skb->data,
- skb->len);
- if (err < 0)
- goto do_skb_free;
- err = skb->len;
- }
-do_skb_free:
+ if (!skb)
+ goto end;
+
+ if (len > skb->len)
+ len = skb->len;
+ else if (len < skb->len)
+ msg->msg_flags |= MSG_TRUNC;
+
+ err = skb_copy_datagram_iovec(skb, 0, msg->msg_iov, len);
+ if (likely(err == 0))
+ err = len;
+
kfree_skb(skb);
end:
return err;
@@ -858,7 +873,7 @@
tunnel = pppol2tp_sock_to_tunnel(session->tunnel_sock);
if (tunnel == NULL)
- goto error;
+ goto error_put_sess;
/* What header length is configured for this session? */
hdr_len = pppol2tp_l2tp_header_len(session);
@@ -870,7 +885,7 @@
sizeof(ppph) + total_len,
0, GFP_KERNEL);
if (!skb)
- goto error;
+ goto error_put_sess_tun;
/* Reserve space for headers. */
skb_reserve(skb, NET_SKB_PAD);
@@ -900,7 +915,7 @@
error = memcpy_fromiovec(skb->data, m->msg_iov, total_len);
if (error < 0) {
kfree_skb(skb);
- goto error;
+ goto error_put_sess_tun;
}
skb_put(skb, total_len);
@@ -947,10 +962,33 @@
session->stats.tx_errors++;
}
+ return error;
+
+error_put_sess_tun:
+ sock_put(session->tunnel_sock);
+error_put_sess:
+ sock_put(sk);
error:
return error;
}
+/* Automatically called when the skb is freed.
+ */
+static void pppol2tp_sock_wfree(struct sk_buff *skb)
+{
+ sock_put(skb->sk);
+}
+
+/* For data skbs that we transmit, we associate with the tunnel socket
+ * but don't do accounting.
+ */
+static inline void pppol2tp_skb_set_owner_w(struct sk_buff *skb, struct sock *sk)
+{
+ sock_hold(sk);
+ skb->sk = sk;
+ skb->destructor = pppol2tp_sock_wfree;
+}
+
/* Transmit function called by generic PPP driver. Sends PPP frame
* over PPPoL2TP socket.
*
@@ -980,6 +1018,8 @@
__wsum csum = 0;
struct udphdr *uh;
unsigned int len;
+ int old_headroom;
+ int new_headroom;
if (sock_flag(sk, SOCK_DEAD) || !(sk->sk_state & PPPOX_CONNECTED))
goto abort;
@@ -991,25 +1031,27 @@
sk_tun = session->tunnel_sock;
if (sk_tun == NULL)
- goto abort;
+ goto abort_put_sess;
tunnel = pppol2tp_sock_to_tunnel(sk_tun);
if (tunnel == NULL)
- goto abort;
+ goto abort_put_sess;
/* What header length is configured for this session? */
hdr_len = pppol2tp_l2tp_header_len(session);
/* Check that there's enough headroom in the skb to insert IP,
* UDP and L2TP and PPP headers. If not enough, expand it to
- * make room. Note that a new skb (or a clone) is
- * allocated. If we return an error from this point on, make
- * sure we free the new skb but do not free the original skb
- * since that is done by the caller for the error case.
+ * make room. Adjust truesize.
*/
headroom = NET_SKB_PAD + sizeof(struct iphdr) +
sizeof(struct udphdr) + hdr_len + sizeof(ppph);
+ old_headroom = skb_headroom(skb);
if (skb_cow_head(skb, headroom))
- goto abort;
+ goto abort_put_sess_tun;
+
+ new_headroom = skb_headroom(skb);
+ skb_orphan(skb);
+ skb->truesize += new_headroom - old_headroom;
/* Setup PPP header */
__skb_push(skb, sizeof(ppph));
@@ -1065,8 +1107,7 @@
/* Get routing info from the tunnel socket */
dst_release(skb->dst);
skb->dst = dst_clone(__sk_dst_get(sk_tun));
- skb_orphan(skb);
- skb->sk = sk_tun;
+ pppol2tp_skb_set_owner_w(skb, sk_tun);
/* Queue the packet to IP for output */
len = skb->len;
@@ -1083,8 +1124,14 @@
session->stats.tx_errors++;
}
+ sock_put(sk_tun);
+ sock_put(sk);
return 1;
+abort_put_sess_tun:
+ sock_put(sk_tun);
+abort_put_sess:
+ sock_put(sk);
abort:
/* Free the original skb */
kfree_skb(skb);
@@ -1188,7 +1235,7 @@
{
struct pppol2tp_tunnel *tunnel;
- tunnel = pppol2tp_sock_to_tunnel(sk);
+ tunnel = sk->sk_user_data;
if (tunnel == NULL)
goto end;
@@ -1227,10 +1274,12 @@
if (sk->sk_user_data != NULL) {
struct pppol2tp_tunnel *tunnel;
- session = pppol2tp_sock_to_session(sk);
+ session = sk->sk_user_data;
if (session == NULL)
goto out;
+ BUG_ON(session->magic != L2TP_SESSION_MAGIC);
+
/* Don't use pppol2tp_sock_to_tunnel() here to
* get the tunnel context because the tunnel
* socket might have already been closed (its
@@ -1276,6 +1325,7 @@
static int pppol2tp_release(struct socket *sock)
{
struct sock *sk = sock->sk;
+ struct pppol2tp_session *session;
int error;
if (!sk)
@@ -1293,9 +1343,18 @@
sock_orphan(sk);
sock->sk = NULL;
+ session = pppol2tp_sock_to_session(sk);
+
/* Purge any queued data */
skb_queue_purge(&sk->sk_receive_queue);
skb_queue_purge(&sk->sk_write_queue);
+ if (session != NULL) {
+ struct sk_buff *skb;
+ while ((skb = skb_dequeue(&session->reorder_q))) {
+ kfree_skb(skb);
+ sock_put(sk);
+ }
+ }
release_sock(sk);
@@ -1598,7 +1657,7 @@
error = ppp_register_channel(&po->chan);
if (error)
- goto end;
+ goto end_put_tun;
/* This is how we get the session context from the socket. */
sk->sk_user_data = session;
@@ -1618,12 +1677,21 @@
PRINTK(session->debug, PPPOL2TP_MSG_CONTROL, KERN_INFO,
"%s: created\n", session->name);
+end_put_tun:
+ sock_put(tunnel_sock);
end:
release_sock(sk);
- if (error != 0)
- PRINTK(session ? session->debug : -1, PPPOL2TP_MSG_CONTROL, KERN_WARNING,
- "%s: connect failed: %d\n", session->name, error);
+ if (error != 0) {
+ if (session)
+ PRINTK(session->debug,
+ PPPOL2TP_MSG_CONTROL, KERN_WARNING,
+ "%s: connect failed: %d\n",
+ session->name, error);
+ else
+ PRINTK(-1, PPPOL2TP_MSG_CONTROL, KERN_WARNING,
+ "connect failed: %d\n", error);
+ }
return error;
}
@@ -1658,6 +1726,7 @@
*usockaddr_len = len;
error = 0;
+ sock_put(sock->sk);
end:
return error;
@@ -1896,14 +1965,17 @@
err = -EBADF;
tunnel = pppol2tp_sock_to_tunnel(session->tunnel_sock);
if (tunnel == NULL)
- goto end;
+ goto end_put_sess;
err = pppol2tp_tunnel_ioctl(tunnel, cmd, arg);
- goto end;
+ sock_put(session->tunnel_sock);
+ goto end_put_sess;
}
err = pppol2tp_session_ioctl(session, cmd, arg);
+end_put_sess:
+ sock_put(sk);
end:
return err;
}
@@ -2049,14 +2121,17 @@
err = -EBADF;
tunnel = pppol2tp_sock_to_tunnel(session->tunnel_sock);
if (tunnel == NULL)
- goto end;
+ goto end_put_sess;
err = pppol2tp_tunnel_setsockopt(sk, tunnel, optname, val);
+ sock_put(session->tunnel_sock);
} else
err = pppol2tp_session_setsockopt(sk, session, optname, val);
err = 0;
+end_put_sess:
+ sock_put(sk);
end:
return err;
}
@@ -2171,20 +2246,24 @@
err = -EBADF;
tunnel = pppol2tp_sock_to_tunnel(session->tunnel_sock);
if (tunnel == NULL)
- goto end;
+ goto end_put_sess;
err = pppol2tp_tunnel_getsockopt(sk, tunnel, optname, &val);
+ sock_put(session->tunnel_sock);
} else
err = pppol2tp_session_getsockopt(sk, session, optname, &val);
err = -EFAULT;
if (put_user(len, (int __user *) optlen))
- goto end;
+ goto end_put_sess;
if (copy_to_user((void __user *) optval, &val, len))
- goto end;
+ goto end_put_sess;
err = 0;
+
+end_put_sess:
+ sock_put(sk);
end:
return err;
}
diff --git a/drivers/net/ps3_gelic_wireless.c b/drivers/net/ps3_gelic_wireless.c
index 0d32123..1dae1f2 100644
--- a/drivers/net/ps3_gelic_wireless.c
+++ b/drivers/net/ps3_gelic_wireless.c
@@ -2474,6 +2474,8 @@
pr_debug("%s: <-\n", __func__);
+ free_page((unsigned long)wl->buf);
+
pr_debug("%s: destroy queues\n", __func__);
destroy_workqueue(wl->eurus_cmd_queue);
destroy_workqueue(wl->event_queue);
diff --git a/drivers/net/r6040.c b/drivers/net/r6040.c
index 169edc1..858b191 100644
--- a/drivers/net/r6040.c
+++ b/drivers/net/r6040.c
@@ -733,7 +733,7 @@
}
/* Timer active again */
- mod_timer(&lp->timer, jiffies + round_jiffies(HZ));
+ mod_timer(&lp->timer, round_jiffies(jiffies + HZ));
}
/* Read/set MAC address routines */
diff --git a/drivers/net/s2io-regs.h b/drivers/net/s2io-regs.h
index 2109508..f8274f8 100644
--- a/drivers/net/s2io-regs.h
+++ b/drivers/net/s2io-regs.h
@@ -250,7 +250,7 @@
u64 tx_mat0_n[0x8];
#define TX_MAT_SET(fifo, msi) vBIT(msi, (8 * fifo), 8)
- u8 unused_1[0x8];
+ u64 xmsi_mask_reg;
u64 stat_byte_cnt;
#define STAT_BC(n) vBIT(n,4,12)
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index 523478e..b5c1e66 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -86,7 +86,7 @@
#include "s2io.h"
#include "s2io-regs.h"
-#define DRV_VERSION "2.0.26.23"
+#define DRV_VERSION "2.0.26.24"
/* S2io Driver name & version. */
static char s2io_driver_name[] = "Neterion";
@@ -1113,9 +1113,10 @@
struct pci_dev *tdev = NULL;
while ((tdev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, tdev)) != NULL) {
if (tdev->vendor == NEC_VENID && tdev->device == NEC_DEVID) {
- if (tdev->bus == s2io_pdev->bus->parent)
+ if (tdev->bus == s2io_pdev->bus->parent) {
pci_dev_put(tdev);
return 1;
+ }
}
}
return 0;
@@ -1219,15 +1220,33 @@
TTI_DATA1_MEM_TX_URNG_B(0x10) |
TTI_DATA1_MEM_TX_URNG_C(0x30) |
TTI_DATA1_MEM_TX_TIMER_AC_EN;
-
- if (use_continuous_tx_intrs && (link == LINK_UP))
- val64 |= TTI_DATA1_MEM_TX_TIMER_CI_EN;
+ if (i == 0)
+ if (use_continuous_tx_intrs && (link == LINK_UP))
+ val64 |= TTI_DATA1_MEM_TX_TIMER_CI_EN;
writeq(val64, &bar0->tti_data1_mem);
- val64 = TTI_DATA2_MEM_TX_UFC_A(0x10) |
- TTI_DATA2_MEM_TX_UFC_B(0x20) |
- TTI_DATA2_MEM_TX_UFC_C(0x40) |
- TTI_DATA2_MEM_TX_UFC_D(0x80);
+ if (nic->config.intr_type == MSI_X) {
+ val64 = TTI_DATA2_MEM_TX_UFC_A(0x10) |
+ TTI_DATA2_MEM_TX_UFC_B(0x100) |
+ TTI_DATA2_MEM_TX_UFC_C(0x200) |
+ TTI_DATA2_MEM_TX_UFC_D(0x300);
+ } else {
+ if ((nic->config.tx_steering_type ==
+ TX_DEFAULT_STEERING) &&
+ (config->tx_fifo_num > 1) &&
+ (i >= nic->udp_fifo_idx) &&
+ (i < (nic->udp_fifo_idx +
+ nic->total_udp_fifos)))
+ val64 = TTI_DATA2_MEM_TX_UFC_A(0x50) |
+ TTI_DATA2_MEM_TX_UFC_B(0x80) |
+ TTI_DATA2_MEM_TX_UFC_C(0x100) |
+ TTI_DATA2_MEM_TX_UFC_D(0x120);
+ else
+ val64 = TTI_DATA2_MEM_TX_UFC_A(0x10) |
+ TTI_DATA2_MEM_TX_UFC_B(0x20) |
+ TTI_DATA2_MEM_TX_UFC_C(0x40) |
+ TTI_DATA2_MEM_TX_UFC_D(0x80);
+ }
writeq(val64, &bar0->tti_data2_mem);
@@ -2813,6 +2832,15 @@
}
}
+static int s2io_chk_rx_buffers(struct ring_info *ring)
+{
+ if (fill_rx_buffers(ring) == -ENOMEM) {
+ DBG_PRINT(INFO_DBG, "%s:Out of memory", ring->dev->name);
+ DBG_PRINT(INFO_DBG, " in Rx Intr!!\n");
+ }
+ return 0;
+}
+
/**
* s2io_poll - Rx interrupt handler for NAPI support
* @napi : pointer to the napi structure.
@@ -2826,57 +2854,73 @@
* 0 on success and 1 if there are No Rx packets to be processed.
*/
-static int s2io_poll(struct napi_struct *napi, int budget)
+static int s2io_poll_msix(struct napi_struct *napi, int budget)
+{
+ struct ring_info *ring = container_of(napi, struct ring_info, napi);
+ struct net_device *dev = ring->dev;
+ struct config_param *config;
+ struct mac_info *mac_control;
+ int pkts_processed = 0;
+ u8 __iomem *addr = NULL;
+ u8 val8 = 0;
+ struct s2io_nic *nic = dev->priv;
+ struct XENA_dev_config __iomem *bar0 = nic->bar0;
+ int budget_org = budget;
+
+ config = &nic->config;
+ mac_control = &nic->mac_control;
+
+ if (unlikely(!is_s2io_card_up(nic)))
+ return 0;
+
+ pkts_processed = rx_intr_handler(ring, budget);
+ s2io_chk_rx_buffers(ring);
+
+ if (pkts_processed < budget_org) {
+ netif_rx_complete(dev, napi);
+ /*Re Enable MSI-Rx Vector*/
+ addr = (u8 __iomem *)&bar0->xmsi_mask_reg;
+ addr += 7 - ring->ring_no;
+ val8 = (ring->ring_no == 0) ? 0x3f : 0xbf;
+ writeb(val8, addr);
+ val8 = readb(addr);
+ }
+ return pkts_processed;
+}
+static int s2io_poll_inta(struct napi_struct *napi, int budget)
{
struct s2io_nic *nic = container_of(napi, struct s2io_nic, napi);
+ struct ring_info *ring;
struct net_device *dev = nic->dev;
- int pkt_cnt = 0, org_pkts_to_process;
- struct mac_info *mac_control;
struct config_param *config;
+ struct mac_info *mac_control;
+ int pkts_processed = 0;
+ int ring_pkts_processed, i;
struct XENA_dev_config __iomem *bar0 = nic->bar0;
- int i;
+ int budget_org = budget;
- mac_control = &nic->mac_control;
config = &nic->config;
+ mac_control = &nic->mac_control;
- nic->pkts_to_process = budget;
- org_pkts_to_process = nic->pkts_to_process;
-
- writeq(S2IO_MINUS_ONE, &bar0->rx_traffic_int);
- readl(&bar0->rx_traffic_int);
+ if (unlikely(!is_s2io_card_up(nic)))
+ return 0;
for (i = 0; i < config->rx_ring_num; i++) {
- rx_intr_handler(&mac_control->rings[i]);
- pkt_cnt = org_pkts_to_process - nic->pkts_to_process;
- if (!nic->pkts_to_process) {
- /* Quota for the current iteration has been met */
- goto no_rx;
- }
- }
-
- netif_rx_complete(dev, napi);
-
- for (i = 0; i < config->rx_ring_num; i++) {
- if (fill_rx_buffers(&mac_control->rings[i]) == -ENOMEM) {
- DBG_PRINT(INFO_DBG, "%s:Out of memory", dev->name);
- DBG_PRINT(INFO_DBG, " in Rx Poll!!\n");
+ ring = &mac_control->rings[i];
+ ring_pkts_processed = rx_intr_handler(ring, budget);
+ s2io_chk_rx_buffers(ring);
+ pkts_processed += ring_pkts_processed;
+ budget -= ring_pkts_processed;
+ if (budget <= 0)
break;
- }
}
- /* Re enable the Rx interrupts. */
- writeq(0x0, &bar0->rx_traffic_mask);
- readl(&bar0->rx_traffic_mask);
- return pkt_cnt;
-
-no_rx:
- for (i = 0; i < config->rx_ring_num; i++) {
- if (fill_rx_buffers(&mac_control->rings[i]) == -ENOMEM) {
- DBG_PRINT(INFO_DBG, "%s:Out of memory", dev->name);
- DBG_PRINT(INFO_DBG, " in Rx Poll!!\n");
- break;
- }
+ if (pkts_processed < budget_org) {
+ netif_rx_complete(dev, napi);
+ /* Re enable the Rx interrupts for the ring */
+ writeq(0, &bar0->rx_traffic_mask);
+ readl(&bar0->rx_traffic_mask);
}
- return pkt_cnt;
+ return pkts_processed;
}
#ifdef CONFIG_NET_POLL_CONTROLLER
@@ -2918,7 +2962,7 @@
/* check for received packet and indicate up to network */
for (i = 0; i < config->rx_ring_num; i++)
- rx_intr_handler(&mac_control->rings[i]);
+ rx_intr_handler(&mac_control->rings[i], 0);
for (i = 0; i < config->rx_ring_num; i++) {
if (fill_rx_buffers(&mac_control->rings[i]) == -ENOMEM) {
@@ -2934,7 +2978,8 @@
/**
* rx_intr_handler - Rx interrupt handler
- * @nic: device private variable.
+ * @ring_info: per ring structure.
+ * @budget: budget for napi processing.
* Description:
* If the interrupt is because of a received frame or if the
* receive ring contains fresh as yet un-processed frames,this function is
@@ -2942,15 +2987,15 @@
* stopped and sends the skb to the OSM's Rx handler and then increments
* the offset.
* Return Value:
- * NONE.
+ * No. of napi packets processed.
*/
-static void rx_intr_handler(struct ring_info *ring_data)
+static int rx_intr_handler(struct ring_info *ring_data, int budget)
{
int get_block, put_block;
struct rx_curr_get_info get_info, put_info;
struct RxD_t *rxdp;
struct sk_buff *skb;
- int pkt_cnt = 0;
+ int pkt_cnt = 0, napi_pkts = 0;
int i;
struct RxD1* rxdp1;
struct RxD3* rxdp3;
@@ -2977,7 +3022,7 @@
DBG_PRINT(ERR_DBG, "%s: The skb is ",
ring_data->dev->name);
DBG_PRINT(ERR_DBG, "Null in Rx Intr\n");
- return;
+ return 0;
}
if (ring_data->rxd_mode == RXD_MODE_1) {
rxdp1 = (struct RxD1*)rxdp;
@@ -3014,9 +3059,10 @@
rxdp = ring_data->rx_blocks[get_block].block_virt_addr;
}
- if(ring_data->nic->config.napi){
- ring_data->nic->pkts_to_process -= 1;
- if (!ring_data->nic->pkts_to_process)
+ if (ring_data->nic->config.napi) {
+ budget--;
+ napi_pkts++;
+ if (!budget)
break;
}
pkt_cnt++;
@@ -3034,6 +3080,7 @@
}
}
}
+ return(napi_pkts);
}
/**
@@ -3730,14 +3777,19 @@
{
struct XENA_dev_config __iomem *bar0 = nic->bar0;
u64 val64;
- int i;
+ int i, msix_index;
+
+
+ if (nic->device_type == XFRAME_I_DEVICE)
+ return;
for (i=0; i < MAX_REQUESTED_MSI_X; i++) {
+ msix_index = (i) ? ((i-1) * 8 + 1): 0;
writeq(nic->msix_info[i].addr, &bar0->xmsi_address);
writeq(nic->msix_info[i].data, &bar0->xmsi_data);
- val64 = (s2BIT(7) | s2BIT(15) | vBIT(i, 26, 6));
+ val64 = (s2BIT(7) | s2BIT(15) | vBIT(msix_index, 26, 6));
writeq(val64, &bar0->xmsi_access);
- if (wait_for_msix_trans(nic, i)) {
+ if (wait_for_msix_trans(nic, msix_index)) {
DBG_PRINT(ERR_DBG, "failed in %s\n", __FUNCTION__);
continue;
}
@@ -3748,13 +3800,17 @@
{
struct XENA_dev_config __iomem *bar0 = nic->bar0;
u64 val64, addr, data;
- int i;
+ int i, msix_index;
+
+ if (nic->device_type == XFRAME_I_DEVICE)
+ return;
/* Store and display */
for (i=0; i < MAX_REQUESTED_MSI_X; i++) {
- val64 = (s2BIT(15) | vBIT(i, 26, 6));
+ msix_index = (i) ? ((i-1) * 8 + 1): 0;
+ val64 = (s2BIT(15) | vBIT(msix_index, 26, 6));
writeq(val64, &bar0->xmsi_access);
- if (wait_for_msix_trans(nic, i)) {
+ if (wait_for_msix_trans(nic, msix_index)) {
DBG_PRINT(ERR_DBG, "failed in %s\n", __FUNCTION__);
continue;
}
@@ -3770,11 +3826,11 @@
static int s2io_enable_msi_x(struct s2io_nic *nic)
{
struct XENA_dev_config __iomem *bar0 = nic->bar0;
- u64 tx_mat, rx_mat;
+ u64 rx_mat;
u16 msi_control; /* Temp variable */
int ret, i, j, msix_indx = 1;
- nic->entries = kcalloc(MAX_REQUESTED_MSI_X, sizeof(struct msix_entry),
+ nic->entries = kmalloc(nic->num_entries * sizeof(struct msix_entry),
GFP_KERNEL);
if (!nic->entries) {
DBG_PRINT(INFO_DBG, "%s: Memory allocation failed\n", \
@@ -3783,10 +3839,12 @@
return -ENOMEM;
}
nic->mac_control.stats_info->sw_stat.mem_allocated
- += (MAX_REQUESTED_MSI_X * sizeof(struct msix_entry));
+ += (nic->num_entries * sizeof(struct msix_entry));
+
+ memset(nic->entries, 0, nic->num_entries * sizeof(struct msix_entry));
nic->s2io_entries =
- kcalloc(MAX_REQUESTED_MSI_X, sizeof(struct s2io_msix_entry),
+ kmalloc(nic->num_entries * sizeof(struct s2io_msix_entry),
GFP_KERNEL);
if (!nic->s2io_entries) {
DBG_PRINT(INFO_DBG, "%s: Memory allocation failed\n",
@@ -3794,60 +3852,52 @@
nic->mac_control.stats_info->sw_stat.mem_alloc_fail_cnt++;
kfree(nic->entries);
nic->mac_control.stats_info->sw_stat.mem_freed
- += (MAX_REQUESTED_MSI_X * sizeof(struct msix_entry));
+ += (nic->num_entries * sizeof(struct msix_entry));
return -ENOMEM;
}
nic->mac_control.stats_info->sw_stat.mem_allocated
- += (MAX_REQUESTED_MSI_X * sizeof(struct s2io_msix_entry));
+ += (nic->num_entries * sizeof(struct s2io_msix_entry));
+ memset(nic->s2io_entries, 0,
+ nic->num_entries * sizeof(struct s2io_msix_entry));
- for (i=0; i< MAX_REQUESTED_MSI_X; i++) {
- nic->entries[i].entry = i;
- nic->s2io_entries[i].entry = i;
+ nic->entries[0].entry = 0;
+ nic->s2io_entries[0].entry = 0;
+ nic->s2io_entries[0].in_use = MSIX_FLG;
+ nic->s2io_entries[0].type = MSIX_ALARM_TYPE;
+ nic->s2io_entries[0].arg = &nic->mac_control.fifos;
+
+ for (i = 1; i < nic->num_entries; i++) {
+ nic->entries[i].entry = ((i - 1) * 8) + 1;
+ nic->s2io_entries[i].entry = ((i - 1) * 8) + 1;
nic->s2io_entries[i].arg = NULL;
nic->s2io_entries[i].in_use = 0;
}
- tx_mat = readq(&bar0->tx_mat0_n[0]);
- for (i=0; i<nic->config.tx_fifo_num; i++, msix_indx++) {
- tx_mat |= TX_MAT_SET(i, msix_indx);
- nic->s2io_entries[msix_indx].arg = &nic->mac_control.fifos[i];
- nic->s2io_entries[msix_indx].type = MSIX_FIFO_TYPE;
- nic->s2io_entries[msix_indx].in_use = MSIX_FLG;
- }
- writeq(tx_mat, &bar0->tx_mat0_n[0]);
-
rx_mat = readq(&bar0->rx_mat);
- for (j = 0; j < nic->config.rx_ring_num; j++, msix_indx++) {
+ for (j = 0; j < nic->config.rx_ring_num; j++) {
rx_mat |= RX_MAT_SET(j, msix_indx);
- nic->s2io_entries[msix_indx].arg
- = &nic->mac_control.rings[j];
- nic->s2io_entries[msix_indx].type = MSIX_RING_TYPE;
- nic->s2io_entries[msix_indx].in_use = MSIX_FLG;
+ nic->s2io_entries[j+1].arg = &nic->mac_control.rings[j];
+ nic->s2io_entries[j+1].type = MSIX_RING_TYPE;
+ nic->s2io_entries[j+1].in_use = MSIX_FLG;
+ msix_indx += 8;
}
writeq(rx_mat, &bar0->rx_mat);
+ readq(&bar0->rx_mat);
- nic->avail_msix_vectors = 0;
- ret = pci_enable_msix(nic->pdev, nic->entries, MAX_REQUESTED_MSI_X);
+ ret = pci_enable_msix(nic->pdev, nic->entries, nic->num_entries);
/* We fail init if error or we get less vectors than min required */
- if (ret >= (nic->config.tx_fifo_num + nic->config.rx_ring_num + 1)) {
- nic->avail_msix_vectors = ret;
- ret = pci_enable_msix(nic->pdev, nic->entries, ret);
- }
if (ret) {
DBG_PRINT(ERR_DBG, "%s: Enabling MSIX failed\n", nic->dev->name);
kfree(nic->entries);
nic->mac_control.stats_info->sw_stat.mem_freed
- += (MAX_REQUESTED_MSI_X * sizeof(struct msix_entry));
+ += (nic->num_entries * sizeof(struct msix_entry));
kfree(nic->s2io_entries);
nic->mac_control.stats_info->sw_stat.mem_freed
- += (MAX_REQUESTED_MSI_X * sizeof(struct s2io_msix_entry));
+ += (nic->num_entries * sizeof(struct s2io_msix_entry));
nic->entries = NULL;
nic->s2io_entries = NULL;
- nic->avail_msix_vectors = 0;
return -ENOMEM;
}
- if (!nic->avail_msix_vectors)
- nic->avail_msix_vectors = MAX_REQUESTED_MSI_X;
/*
* To enable MSI-X, MSI also needs to be enabled, due to a bug
@@ -3919,7 +3969,7 @@
int i;
u16 msi_control;
- for (i = 0; i < MAX_REQUESTED_MSI_X; i++) {
+ for (i = 0; i < sp->num_entries; i++) {
if (sp->s2io_entries[i].in_use ==
MSIX_REGISTERED_SUCCESS) {
int vector = sp->entries[i].vector;
@@ -3975,29 +4025,6 @@
netif_carrier_off(dev);
sp->last_link_state = 0;
- if (sp->config.intr_type == MSI_X) {
- int ret = s2io_enable_msi_x(sp);
-
- if (!ret) {
- ret = s2io_test_msi(sp);
- /* rollback MSI-X, will re-enable during add_isr() */
- remove_msix_isr(sp);
- }
- if (ret) {
-
- DBG_PRINT(ERR_DBG,
- "%s: MSI-X requested but failed to enable\n",
- dev->name);
- sp->config.intr_type = INTA;
- }
- }
-
- /* NAPI doesn't work well with MSI(X) */
- if (sp->config.intr_type != INTA) {
- if(sp->config.napi)
- sp->config.napi = 0;
- }
-
/* Initialize H/W and enable interrupts */
err = s2io_card_up(sp);
if (err) {
@@ -4020,12 +4047,12 @@
if (sp->entries) {
kfree(sp->entries);
sp->mac_control.stats_info->sw_stat.mem_freed
- += (MAX_REQUESTED_MSI_X * sizeof(struct msix_entry));
+ += (sp->num_entries * sizeof(struct msix_entry));
}
if (sp->s2io_entries) {
kfree(sp->s2io_entries);
sp->mac_control.stats_info->sw_stat.mem_freed
- += (MAX_REQUESTED_MSI_X * sizeof(struct s2io_msix_entry));
+ += (sp->num_entries * sizeof(struct s2io_msix_entry));
}
}
return err;
@@ -4327,40 +4354,65 @@
mod_timer(&sp->alarm_timer, jiffies + HZ / 2);
}
-static int s2io_chk_rx_buffers(struct ring_info *ring)
-{
- if (fill_rx_buffers(ring) == -ENOMEM) {
- DBG_PRINT(INFO_DBG, "%s:Out of memory", ring->dev->name);
- DBG_PRINT(INFO_DBG, " in Rx Intr!!\n");
- }
- return 0;
-}
-
static irqreturn_t s2io_msix_ring_handle(int irq, void *dev_id)
{
struct ring_info *ring = (struct ring_info *)dev_id;
struct s2io_nic *sp = ring->nic;
+ struct XENA_dev_config __iomem *bar0 = sp->bar0;
+ struct net_device *dev = sp->dev;
- if (!is_s2io_card_up(sp))
+ if (unlikely(!is_s2io_card_up(sp)))
return IRQ_HANDLED;
- rx_intr_handler(ring);
- s2io_chk_rx_buffers(ring);
+ if (sp->config.napi) {
+ u8 __iomem *addr = NULL;
+ u8 val8 = 0;
+
+ addr = (u8 __iomem *)&bar0->xmsi_mask_reg;
+ addr += (7 - ring->ring_no);
+ val8 = (ring->ring_no == 0) ? 0x7f : 0xff;
+ writeb(val8, addr);
+ val8 = readb(addr);
+ netif_rx_schedule(dev, &ring->napi);
+ } else {
+ rx_intr_handler(ring, 0);
+ s2io_chk_rx_buffers(ring);
+ }
return IRQ_HANDLED;
}
static irqreturn_t s2io_msix_fifo_handle(int irq, void *dev_id)
{
- struct fifo_info *fifo = (struct fifo_info *)dev_id;
- struct s2io_nic *sp = fifo->nic;
+ int i;
+ struct fifo_info *fifos = (struct fifo_info *)dev_id;
+ struct s2io_nic *sp = fifos->nic;
+ struct XENA_dev_config __iomem *bar0 = sp->bar0;
+ struct config_param *config = &sp->config;
+ u64 reason;
- if (!is_s2io_card_up(sp))
+ if (unlikely(!is_s2io_card_up(sp)))
+ return IRQ_NONE;
+
+ reason = readq(&bar0->general_int_status);
+ if (unlikely(reason == S2IO_MINUS_ONE))
+ /* Nothing much can be done. Get out */
return IRQ_HANDLED;
- tx_intr_handler(fifo);
+ writeq(S2IO_MINUS_ONE, &bar0->general_int_mask);
+
+ if (reason & GEN_INTR_TXTRAFFIC)
+ writeq(S2IO_MINUS_ONE, &bar0->tx_traffic_int);
+
+ for (i = 0; i < config->tx_fifo_num; i++)
+ tx_intr_handler(&fifos[i]);
+
+ writeq(sp->general_int_mask, &bar0->general_int_mask);
+ readl(&bar0->general_int_status);
+
return IRQ_HANDLED;
}
+
static void s2io_txpic_intr_handle(struct s2io_nic *sp)
{
struct XENA_dev_config __iomem *bar0 = sp->bar0;
@@ -4762,14 +4814,10 @@
if (config->napi) {
if (reason & GEN_INTR_RXTRAFFIC) {
- if (likely(netif_rx_schedule_prep(dev,
- &sp->napi))) {
- __netif_rx_schedule(dev, &sp->napi);
- writeq(S2IO_MINUS_ONE,
- &bar0->rx_traffic_mask);
- } else
- writeq(S2IO_MINUS_ONE,
- &bar0->rx_traffic_int);
+ netif_rx_schedule(dev, &sp->napi);
+ writeq(S2IO_MINUS_ONE, &bar0->rx_traffic_mask);
+ writeq(S2IO_MINUS_ONE, &bar0->rx_traffic_int);
+ readl(&bar0->rx_traffic_int);
}
} else {
/*
@@ -4781,7 +4829,7 @@
writeq(S2IO_MINUS_ONE, &bar0->rx_traffic_int);
for (i = 0; i < config->rx_ring_num; i++)
- rx_intr_handler(&mac_control->rings[i]);
+ rx_intr_handler(&mac_control->rings[i], 0);
}
/*
@@ -6984,62 +7032,62 @@
/* After proper initialization of H/W, register ISR */
if (sp->config.intr_type == MSI_X) {
- int i, msix_tx_cnt=0,msix_rx_cnt=0;
+ int i, msix_rx_cnt = 0;
- for (i=1; (sp->s2io_entries[i].in_use == MSIX_FLG); i++) {
- if (sp->s2io_entries[i].type == MSIX_FIFO_TYPE) {
- sprintf(sp->desc[i], "%s:MSI-X-%d-TX",
+ for (i = 0; i < sp->num_entries; i++) {
+ if (sp->s2io_entries[i].in_use == MSIX_FLG) {
+ if (sp->s2io_entries[i].type ==
+ MSIX_RING_TYPE) {
+ sprintf(sp->desc[i], "%s:MSI-X-%d-RX",
+ dev->name, i);
+ err = request_irq(sp->entries[i].vector,
+ s2io_msix_ring_handle, 0,
+ sp->desc[i],
+ sp->s2io_entries[i].arg);
+ } else if (sp->s2io_entries[i].type ==
+ MSIX_ALARM_TYPE) {
+ sprintf(sp->desc[i], "%s:MSI-X-%d-TX",
dev->name, i);
- err = request_irq(sp->entries[i].vector,
- s2io_msix_fifo_handle, 0, sp->desc[i],
- sp->s2io_entries[i].arg);
- /* If either data or addr is zero print it */
- if(!(sp->msix_info[i].addr &&
- sp->msix_info[i].data)) {
- DBG_PRINT(ERR_DBG, "%s @ Addr:0x%llx "
- "Data:0x%llx\n",sp->desc[i],
- (unsigned long long)
- sp->msix_info[i].addr,
- (unsigned long long)
- sp->msix_info[i].data);
- } else {
- msix_tx_cnt++;
+ err = request_irq(sp->entries[i].vector,
+ s2io_msix_fifo_handle, 0,
+ sp->desc[i],
+ sp->s2io_entries[i].arg);
+
}
- } else {
- sprintf(sp->desc[i], "%s:MSI-X-%d-RX",
- dev->name, i);
- err = request_irq(sp->entries[i].vector,
- s2io_msix_ring_handle, 0, sp->desc[i],
- sp->s2io_entries[i].arg);
- /* If either data or addr is zero print it */
- if(!(sp->msix_info[i].addr &&
+ /* if either data or addr is zero print it. */
+ if (!(sp->msix_info[i].addr &&
sp->msix_info[i].data)) {
- DBG_PRINT(ERR_DBG, "%s @ Addr:0x%llx "
- "Data:0x%llx\n",sp->desc[i],
+ DBG_PRINT(ERR_DBG,
+ "%s @Addr:0x%llx Data:0x%llx\n",
+ sp->desc[i],
(unsigned long long)
sp->msix_info[i].addr,
(unsigned long long)
- sp->msix_info[i].data);
- } else {
+ ntohl(sp->msix_info[i].data));
+ } else
msix_rx_cnt++;
+ if (err) {
+ remove_msix_isr(sp);
+
+ DBG_PRINT(ERR_DBG,
+ "%s:MSI-X-%d registration "
+ "failed\n", dev->name, i);
+
+ DBG_PRINT(ERR_DBG,
+ "%s: Defaulting to INTA\n",
+ dev->name);
+ sp->config.intr_type = INTA;
+ break;
}
+ sp->s2io_entries[i].in_use =
+ MSIX_REGISTERED_SUCCESS;
}
- if (err) {
- remove_msix_isr(sp);
- DBG_PRINT(ERR_DBG,"%s:MSI-X-%d registration "
- "failed\n", dev->name, i);
- DBG_PRINT(ERR_DBG, "%s: defaulting to INTA\n",
- dev->name);
- sp->config.intr_type = INTA;
- break;
- }
- sp->s2io_entries[i].in_use = MSIX_REGISTERED_SUCCESS;
}
if (!err) {
- printk(KERN_INFO "MSI-X-TX %d entries enabled\n",
- msix_tx_cnt);
printk(KERN_INFO "MSI-X-RX %d entries enabled\n",
- msix_rx_cnt);
+ --msix_rx_cnt);
+ DBG_PRINT(INFO_DBG, "MSI-X-TX entries enabled"
+ " through alarm vector\n");
}
}
if (sp->config.intr_type == INTA) {
@@ -7080,8 +7128,15 @@
clear_bit(__S2IO_STATE_CARD_UP, &sp->state);
/* Disable napi */
- if (config->napi)
- napi_disable(&sp->napi);
+ if (sp->config.napi) {
+ int off = 0;
+ if (config->intr_type == MSI_X) {
+ for (; off < sp->config.rx_ring_num; off++)
+ napi_disable(&sp->mac_control.rings[off].napi);
+ }
+ else
+ napi_disable(&sp->napi);
+ }
/* disable Tx and Rx traffic on the NIC */
if (do_io)
@@ -7173,8 +7228,15 @@
}
/* Initialise napi */
- if (config->napi)
- napi_enable(&sp->napi);
+ if (config->napi) {
+ int i;
+ if (config->intr_type == MSI_X) {
+ for (i = 0; i < sp->config.rx_ring_num; i++)
+ napi_enable(&sp->mac_control.rings[i].napi);
+ } else {
+ napi_enable(&sp->napi);
+ }
+ }
/* Maintain the state prior to the open */
if (sp->promisc_flg)
@@ -7217,7 +7279,7 @@
/* Enable select interrupts */
en_dis_err_alarms(sp, ENA_ALL_INTRS, ENABLE_INTRS);
if (sp->config.intr_type != INTA)
- en_dis_able_nic_intrs(sp, ENA_ALL_INTRS, DISABLE_INTRS);
+ en_dis_able_nic_intrs(sp, TX_TRAFFIC_INTR, ENABLE_INTRS);
else {
interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR;
interruptible |= TX_PIC_INTR;
@@ -7615,9 +7677,6 @@
rx_ring_num = MAX_RX_RINGS;
}
- if (*dev_intr_type != INTA)
- napi = 0;
-
if ((*dev_intr_type != INTA) && (*dev_intr_type != MSI_X)) {
DBG_PRINT(ERR_DBG, "s2io: Wrong intr_type requested. "
"Defaulting to INTA\n");
@@ -7918,8 +7977,6 @@
* will use eth_mac_addr() for dev->set_mac_address
* mac address will be set every time dev->open() is called
*/
- netif_napi_add(dev, &sp->napi, s2io_poll, 32);
-
#ifdef CONFIG_NET_POLL_CONTROLLER
dev->poll_controller = s2io_netpoll;
#endif
@@ -7963,6 +8020,32 @@
}
}
+ if (sp->config.intr_type == MSI_X) {
+ sp->num_entries = config->rx_ring_num + 1;
+ ret = s2io_enable_msi_x(sp);
+
+ if (!ret) {
+ ret = s2io_test_msi(sp);
+ /* rollback MSI-X, will re-enable during add_isr() */
+ remove_msix_isr(sp);
+ }
+ if (ret) {
+
+ DBG_PRINT(ERR_DBG,
+ "%s: MSI-X requested but failed to enable\n",
+ dev->name);
+ sp->config.intr_type = INTA;
+ }
+ }
+
+ if (config->intr_type == MSI_X) {
+ for (i = 0; i < config->rx_ring_num ; i++)
+ netif_napi_add(dev, &mac_control->rings[i].napi,
+ s2io_poll_msix, 64);
+ } else {
+ netif_napi_add(dev, &sp->napi, s2io_poll_inta, 64);
+ }
+
/* Not needed for Herc */
if (sp->device_type & XFRAME_I_DEVICE) {
/*
@@ -8013,6 +8096,11 @@
/* store mac addresses from CAM to s2io_nic structure */
do_s2io_store_unicast_mc(sp);
+ /* Configure MSIX vector for number of rings configured plus one */
+ if ((sp->device_type == XFRAME_II_DEVICE) &&
+ (config->intr_type == MSI_X))
+ sp->num_entries = config->rx_ring_num + 1;
+
/* Store the values of the MSIX table in the s2io_nic structure */
store_xmsi_data(sp);
/* reset Nic and bring it to known state */
@@ -8078,8 +8166,14 @@
break;
}
- if (napi)
+ switch (sp->config.napi) {
+ case 0:
+ DBG_PRINT(ERR_DBG, "%s: NAPI disabled\n", dev->name);
+ break;
+ case 1:
DBG_PRINT(ERR_DBG, "%s: NAPI enabled\n", dev->name);
+ break;
+ }
DBG_PRINT(ERR_DBG, "%s: Using %d Tx fifo(s)\n", dev->name,
sp->config.tx_fifo_num);
diff --git a/drivers/net/s2io.h b/drivers/net/s2io.h
index 0709ebae..4706f7f 100644
--- a/drivers/net/s2io.h
+++ b/drivers/net/s2io.h
@@ -706,7 +706,7 @@
/* per-ring buffer counter */
u32 rx_bufs_left;
- #define MAX_LRO_SESSIONS 32
+#define MAX_LRO_SESSIONS 32
struct lro lro0_n[MAX_LRO_SESSIONS];
u8 lro;
@@ -725,6 +725,11 @@
/* copy of sp->pdev pointer */
struct pci_dev *pdev;
+ /* Per ring napi struct */
+ struct napi_struct napi;
+
+ unsigned long interrupt_count;
+
/*
* Place holders for the virtual and physical addresses of
* all the Rx Blocks
@@ -841,7 +846,7 @@
* Structure to keep track of the MSI-X vectors and the corresponding
* argument registered against each vector
*/
-#define MAX_REQUESTED_MSI_X 17
+#define MAX_REQUESTED_MSI_X 9
struct s2io_msix_entry
{
u16 vector;
@@ -849,8 +854,8 @@
void *arg;
u8 type;
-#define MSIX_FIFO_TYPE 1
-#define MSIX_RING_TYPE 2
+#define MSIX_ALARM_TYPE 1
+#define MSIX_RING_TYPE 2
u8 in_use;
#define MSIX_REGISTERED_SUCCESS 0xAA
@@ -877,7 +882,6 @@
*/
int pkts_to_process;
struct net_device *dev;
- struct napi_struct napi;
struct mac_info mac_control;
struct config_param config;
struct pci_dev *pdev;
@@ -948,6 +952,7 @@
*/
u8 other_fifo_idx;
+ struct napi_struct napi;
/* after blink, the adapter must be restored with original
* values.
*/
@@ -962,6 +967,7 @@
unsigned long long start_time;
struct vlan_group *vlgrp;
#define MSIX_FLG 0xA5
+ int num_entries;
struct msix_entry *entries;
int msi_detected;
wait_queue_head_t msi_wait;
@@ -982,6 +988,7 @@
u16 lro_max_aggr_per_sess;
volatile unsigned long state;
u64 general_int_mask;
+
#define VPD_STRING_LEN 80
u8 product_name[VPD_STRING_LEN];
u8 serial_num[VPD_STRING_LEN];
@@ -1103,7 +1110,7 @@
static int init_shared_mem(struct s2io_nic *sp);
static void free_shared_mem(struct s2io_nic *sp);
static int init_nic(struct s2io_nic *nic);
-static void rx_intr_handler(struct ring_info *ring_data);
+static int rx_intr_handler(struct ring_info *ring_data, int budget);
static void tx_intr_handler(struct fifo_info *fifo_data);
static void s2io_handle_errors(void * dev_id);
@@ -1114,7 +1121,8 @@
static int rx_osm_handler(struct ring_info *ring_data, struct RxD_t * rxdp);
static void s2io_link(struct s2io_nic * sp, int link);
static void s2io_reset(struct s2io_nic * sp);
-static int s2io_poll(struct napi_struct *napi, int budget);
+static int s2io_poll_msix(struct napi_struct *napi, int budget);
+static int s2io_poll_inta(struct napi_struct *napi, int budget);
static void s2io_init_pci(struct s2io_nic * sp);
static int do_s2io_prog_unicast(struct net_device *dev, u8 *addr);
static void s2io_alarm_handle(unsigned long data);
diff --git a/drivers/net/sb1250-mac.c b/drivers/net/sb1250-mac.c
index 888b7de..33bb18f 100644
--- a/drivers/net/sb1250-mac.c
+++ b/drivers/net/sb1250-mac.c
@@ -179,8 +179,7 @@
#define SBMAC_MAX_TXDESCR 256
#define SBMAC_MAX_RXDESCR 256
-#define ETHER_ALIGN 2
-#define ETHER_ADDR_LEN 6
+#define ETHER_ADDR_LEN 6
#define ENET_PACKET_SIZE 1518
/*#define ENET_PACKET_SIZE 9216 */
@@ -262,8 +261,6 @@
spinlock_t sbm_lock; /* spin lock */
int sbm_devflags; /* current device flags */
- int sbm_buffersize;
-
/*
* Controller-specific things
*/
@@ -305,10 +302,11 @@
static void sbdma_initctx(struct sbmacdma *d, struct sbmac_softc *s, int chan,
int txrx, int maxdescr);
static void sbdma_channel_start(struct sbmacdma *d, int rxtx);
-static int sbdma_add_rcvbuffer(struct sbmacdma *d, struct sk_buff *m);
+static int sbdma_add_rcvbuffer(struct sbmac_softc *sc, struct sbmacdma *d,
+ struct sk_buff *m);
static int sbdma_add_txbuffer(struct sbmacdma *d, struct sk_buff *m);
static void sbdma_emptyring(struct sbmacdma *d);
-static void sbdma_fillring(struct sbmacdma *d);
+static void sbdma_fillring(struct sbmac_softc *sc, struct sbmacdma *d);
static int sbdma_rx_process(struct sbmac_softc *sc, struct sbmacdma *d,
int work_to_do, int poll);
static void sbdma_tx_process(struct sbmac_softc *sc, struct sbmacdma *d,
@@ -777,16 +775,13 @@
d->sbdma_remptr = NULL;
}
-static void sbdma_align_skb(struct sk_buff *skb,int power2,int offset)
+static inline void sbdma_align_skb(struct sk_buff *skb,
+ unsigned int power2, unsigned int offset)
{
- unsigned long addr;
- unsigned long newaddr;
+ unsigned char *addr = skb->data;
+ unsigned char *newaddr = PTR_ALIGN(addr, power2);
- addr = (unsigned long) skb->data;
-
- newaddr = (addr + power2 - 1) & ~(power2 - 1);
-
- skb_reserve(skb,newaddr-addr+offset);
+ skb_reserve(skb, newaddr - addr + offset);
}
@@ -797,7 +792,8 @@
* this queues a buffer for inbound packets.
*
* Input parameters:
- * d - DMA channel descriptor
+ * sc - softc structure
+ * d - DMA channel descriptor
* sb - sk_buff to add, or NULL if we should allocate one
*
* Return value:
@@ -806,8 +802,10 @@
********************************************************************* */
-static int sbdma_add_rcvbuffer(struct sbmacdma *d, struct sk_buff *sb)
+static int sbdma_add_rcvbuffer(struct sbmac_softc *sc, struct sbmacdma *d,
+ struct sk_buff *sb)
{
+ struct net_device *dev = sc->sbm_dev;
struct sbdmadscr *dsc;
struct sbdmadscr *nextdsc;
struct sk_buff *sb_new = NULL;
@@ -848,14 +846,16 @@
*/
if (sb == NULL) {
- sb_new = dev_alloc_skb(ENET_PACKET_SIZE + SMP_CACHE_BYTES * 2 + ETHER_ALIGN);
+ sb_new = netdev_alloc_skb(dev, ENET_PACKET_SIZE +
+ SMP_CACHE_BYTES * 2 +
+ NET_IP_ALIGN);
if (sb_new == NULL) {
pr_info("%s: sk_buff allocation failed\n",
d->sbdma_eth->sbm_dev->name);
return -ENOBUFS;
}
- sbdma_align_skb(sb_new, SMP_CACHE_BYTES, ETHER_ALIGN);
+ sbdma_align_skb(sb_new, SMP_CACHE_BYTES, NET_IP_ALIGN);
}
else {
sb_new = sb;
@@ -874,10 +874,10 @@
* Do not interrupt per DMA transfer.
*/
dsc->dscr_a = virt_to_phys(sb_new->data) |
- V_DMA_DSCRA_A_SIZE(NUMCACHEBLKS(pktsize+ETHER_ALIGN)) | 0;
+ V_DMA_DSCRA_A_SIZE(NUMCACHEBLKS(pktsize + NET_IP_ALIGN)) | 0;
#else
dsc->dscr_a = virt_to_phys(sb_new->data) |
- V_DMA_DSCRA_A_SIZE(NUMCACHEBLKS(pktsize+ETHER_ALIGN)) |
+ V_DMA_DSCRA_A_SIZE(NUMCACHEBLKS(pktsize + NET_IP_ALIGN)) |
M_DMA_DSCRA_INTERRUPT;
#endif
@@ -1032,18 +1032,19 @@
* with sk_buffs
*
* Input parameters:
- * d - DMA channel
+ * sc - softc structure
+ * d - DMA channel
*
* Return value:
* nothing
********************************************************************* */
-static void sbdma_fillring(struct sbmacdma *d)
+static void sbdma_fillring(struct sbmac_softc *sc, struct sbmacdma *d)
{
int idx;
- for (idx = 0; idx < SBMAC_MAX_RXDESCR-1; idx++) {
- if (sbdma_add_rcvbuffer(d,NULL) != 0)
+ for (idx = 0; idx < SBMAC_MAX_RXDESCR - 1; idx++) {
+ if (sbdma_add_rcvbuffer(sc, d, NULL) != 0)
break;
}
}
@@ -1159,10 +1160,11 @@
* packet and put it right back on the receive ring.
*/
- if (unlikely (sbdma_add_rcvbuffer(d,NULL) ==
- -ENOBUFS)) {
+ if (unlikely(sbdma_add_rcvbuffer(sc, d, NULL) ==
+ -ENOBUFS)) {
dev->stats.rx_dropped++;
- sbdma_add_rcvbuffer(d,sb); /* re-add old buffer */
+ /* Re-add old buffer */
+ sbdma_add_rcvbuffer(sc, d, sb);
/* No point in continuing at the moment */
printk(KERN_ERR "dropped packet (1)\n");
d->sbdma_remptr = SBDMA_NEXTBUF(d,sbdma_remptr);
@@ -1212,7 +1214,7 @@
* put it back on the receive ring.
*/
dev->stats.rx_errors++;
- sbdma_add_rcvbuffer(d,sb);
+ sbdma_add_rcvbuffer(sc, d, sb);
}
@@ -1570,7 +1572,7 @@
* Fill the receive ring
*/
- sbdma_fillring(&(s->sbm_rxdma));
+ sbdma_fillring(s, &(s->sbm_rxdma));
/*
* Turn on the rest of the bits in the enable register
@@ -2312,13 +2314,6 @@
dev->dev_addr[i] = eaddr[i];
}
-
- /*
- * Init packet size
- */
-
- sc->sbm_buffersize = ENET_PACKET_SIZE + SMP_CACHE_BYTES * 2 + ETHER_ALIGN;
-
/*
* Initialize context (get pointers to registers and stuff), then
* allocate the memory for the descriptor tables.
diff --git a/drivers/net/sc92031.c b/drivers/net/sc92031.c
index f64a860..61955f8 100644
--- a/drivers/net/sc92031.c
+++ b/drivers/net/sc92031.c
@@ -953,9 +953,6 @@
unsigned entry;
u32 tx_status;
- if (skb_padto(skb, ETH_ZLEN))
- return NETDEV_TX_OK;
-
if (unlikely(skb->len > TX_BUF_SIZE)) {
dev->stats.tx_dropped++;
goto out;
@@ -975,6 +972,11 @@
skb_copy_and_csum_dev(skb, priv->tx_bufs + entry * TX_BUF_SIZE);
len = skb->len;
+ if (len < ETH_ZLEN) {
+ memset(priv->tx_bufs + entry * TX_BUF_SIZE + len,
+ 0, ETH_ZLEN - len);
+ len = ETH_ZLEN;
+ }
wmb();
diff --git a/drivers/net/sfc/Makefile b/drivers/net/sfc/Makefile
index 0f02344..1d2daee 100644
--- a/drivers/net/sfc/Makefile
+++ b/drivers/net/sfc/Makefile
@@ -1,5 +1,5 @@
sfc-y += efx.o falcon.o tx.o rx.o falcon_xmac.o \
- i2c-direct.o ethtool.o xfp_phy.o mdio_10g.o \
- tenxpress.o boards.o sfe4001.o
+ i2c-direct.o selftest.o ethtool.o xfp_phy.o \
+ mdio_10g.o tenxpress.o boards.o sfe4001.o
obj-$(CONFIG_SFC) += sfc.o
diff --git a/drivers/net/sfc/bitfield.h b/drivers/net/sfc/bitfield.h
index 2806201..2c79d27 100644
--- a/drivers/net/sfc/bitfield.h
+++ b/drivers/net/sfc/bitfield.h
@@ -483,7 +483,7 @@
#endif
#define EFX_SET_OWORD_FIELD_VER(efx, oword, field, value) do { \
- if (FALCON_REV(efx) >= FALCON_REV_B0) { \
+ if (falcon_rev(efx) >= FALCON_REV_B0) { \
EFX_SET_OWORD_FIELD((oword), field##_B0, (value)); \
} else { \
EFX_SET_OWORD_FIELD((oword), field##_A1, (value)); \
@@ -491,7 +491,7 @@
} while (0)
#define EFX_QWORD_FIELD_VER(efx, qword, field) \
- (FALCON_REV(efx) >= FALCON_REV_B0 ? \
+ (falcon_rev(efx) >= FALCON_REV_B0 ? \
EFX_QWORD_FIELD((qword), field##_B0) : \
EFX_QWORD_FIELD((qword), field##_A1))
@@ -501,8 +501,5 @@
#define DMA_ADDR_T_WIDTH (8 * sizeof(dma_addr_t))
#define EFX_DMA_TYPE_WIDTH(width) \
(((width) < DMA_ADDR_T_WIDTH) ? (width) : DMA_ADDR_T_WIDTH)
-#define EFX_DMA_MAX_MASK ((DMA_ADDR_T_WIDTH == 64) ? \
- ~((u64) 0) : ~((u32) 0))
-#define EFX_DMA_MASK(mask) ((mask) & EFX_DMA_MAX_MASK)
#endif /* EFX_BITFIELD_H */
diff --git a/drivers/net/sfc/boards.c b/drivers/net/sfc/boards.c
index eecaa6d..7fc0328 100644
--- a/drivers/net/sfc/boards.c
+++ b/drivers/net/sfc/boards.c
@@ -27,10 +27,8 @@
struct efx_blinker *bl = &efx->board_info.blinker;
efx->board_info.set_fault_led(efx, bl->state);
bl->state = !bl->state;
- if (bl->resubmit) {
- bl->timer.expires = jiffies + BLINK_INTERVAL;
- add_timer(&bl->timer);
- }
+ if (bl->resubmit)
+ mod_timer(&bl->timer, jiffies + BLINK_INTERVAL);
}
static void board_blink(struct efx_nic *efx, int blink)
@@ -44,8 +42,7 @@
blinker->state = 0;
setup_timer(&blinker->timer, blink_led_timer,
(unsigned long)efx);
- blinker->timer.expires = jiffies + BLINK_INTERVAL;
- add_timer(&blinker->timer);
+ mod_timer(&blinker->timer, jiffies + BLINK_INTERVAL);
} else {
blinker->resubmit = 0;
if (blinker->timer.function)
diff --git a/drivers/net/sfc/boards.h b/drivers/net/sfc/boards.h
index f56341d..695764d 100644
--- a/drivers/net/sfc/boards.h
+++ b/drivers/net/sfc/boards.h
@@ -22,5 +22,7 @@
extern int efx_set_board_info(struct efx_nic *efx, u16 revision_info);
extern int sfe4001_poweron(struct efx_nic *efx);
extern void sfe4001_poweroff(struct efx_nic *efx);
+/* Are we putting the PHY into flash config mode */
+extern unsigned int sfe4001_phy_flash_cfg;
#endif
diff --git a/drivers/net/sfc/efx.c b/drivers/net/sfc/efx.c
index 59edcf7..4497606 100644
--- a/drivers/net/sfc/efx.c
+++ b/drivers/net/sfc/efx.c
@@ -199,11 +199,12 @@
*/
static inline void efx_channel_processed(struct efx_channel *channel)
{
- /* Write to EVQ_RPTR_REG. If a new event arrived in a race
- * with finishing processing, a new interrupt will be raised.
- */
+ /* The interrupt handler for this channel may set work_pending
+ * as soon as we acknowledge the events we've seen. Make sure
+ * it's cleared before then. */
channel->work_pending = 0;
- smp_wmb(); /* Ensure channel updated before any new interrupt. */
+ smp_wmb();
+
falcon_eventq_read_ack(channel);
}
@@ -265,7 +266,7 @@
napi_disable(&channel->napi_str);
/* Poll the channel */
- (void) efx_process_channel(channel, efx->type->evq_size);
+ efx_process_channel(channel, efx->type->evq_size);
/* Ack the eventq. This may cause an interrupt to be generated
* when they are reenabled */
@@ -317,26 +318,6 @@
*
*************************************************************************/
-/* Setup per-NIC RX buffer parameters.
- * Calculate the rx buffer allocation parameters required to support
- * the current MTU, including padding for header alignment and overruns.
- */
-static void efx_calc_rx_buffer_params(struct efx_nic *efx)
-{
- unsigned int order, len;
-
- len = (max(EFX_PAGE_IP_ALIGN, NET_IP_ALIGN) +
- EFX_MAX_FRAME_LEN(efx->net_dev->mtu) +
- efx->type->rx_buffer_padding);
-
- /* Calculate page-order */
- for (order = 0; ((1u << order) * PAGE_SIZE) < len; ++order)
- ;
-
- efx->rx_buffer_len = len;
- efx->rx_buffer_order = order;
-}
-
static int efx_probe_channel(struct efx_channel *channel)
{
struct efx_tx_queue *tx_queue;
@@ -387,7 +368,14 @@
struct efx_channel *channel;
int rc = 0;
- efx_calc_rx_buffer_params(efx);
+ /* Calculate the rx buffer allocation parameters required to
+ * support the current MTU, including padding for header
+ * alignment and overruns.
+ */
+ efx->rx_buffer_len = (max(EFX_PAGE_IP_ALIGN, NET_IP_ALIGN) +
+ EFX_MAX_FRAME_LEN(efx->net_dev->mtu) +
+ efx->type->rx_buffer_padding);
+ efx->rx_buffer_order = get_order(efx->rx_buffer_len);
/* Initialise the channels */
efx_for_each_channel(channel, efx) {
@@ -440,9 +428,12 @@
netif_napi_add(channel->napi_dev, &channel->napi_str,
efx_poll, napi_weight);
+ /* The interrupt handler for this channel may set work_pending
+ * as soon as we enable it. Make sure it's cleared before
+ * then. Similarly, make sure it sees the enabled flag set. */
channel->work_pending = 0;
channel->enabled = 1;
- smp_wmb(); /* ensure channel updated before first interrupt */
+ smp_wmb();
napi_enable(&channel->napi_str);
@@ -704,7 +695,7 @@
mutex_unlock(&efx->mac_lock);
/* Serialise against efx_set_multicast_list() */
- if (NET_DEV_REGISTERED(efx)) {
+ if (efx_dev_registered(efx)) {
netif_tx_lock_bh(efx->net_dev);
netif_tx_unlock_bh(efx->net_dev);
}
@@ -791,22 +782,23 @@
efx->membase = ioremap_nocache(efx->membase_phys,
efx->type->mem_map_size);
if (!efx->membase) {
- EFX_ERR(efx, "could not map memory BAR %d at %lx+%x\n",
- efx->type->mem_bar, efx->membase_phys,
+ EFX_ERR(efx, "could not map memory BAR %d at %llx+%x\n",
+ efx->type->mem_bar,
+ (unsigned long long)efx->membase_phys,
efx->type->mem_map_size);
rc = -ENOMEM;
goto fail4;
}
- EFX_LOG(efx, "memory BAR %u at %lx+%x (virtual %p)\n",
- efx->type->mem_bar, efx->membase_phys, efx->type->mem_map_size,
- efx->membase);
+ EFX_LOG(efx, "memory BAR %u at %llx+%x (virtual %p)\n",
+ efx->type->mem_bar, (unsigned long long)efx->membase_phys,
+ efx->type->mem_map_size, efx->membase);
return 0;
fail4:
release_mem_region(efx->membase_phys, efx->type->mem_map_size);
fail3:
- efx->membase_phys = 0UL;
+ efx->membase_phys = 0;
fail2:
pci_disable_device(efx->pci_dev);
fail1:
@@ -824,7 +816,7 @@
if (efx->membase_phys) {
pci_release_region(efx->pci_dev, efx->type->mem_bar);
- efx->membase_phys = 0UL;
+ efx->membase_phys = 0;
}
pci_disable_device(efx->pci_dev);
@@ -1043,7 +1035,7 @@
return;
if ((efx->state != STATE_RUNNING) && (efx->state != STATE_INIT))
return;
- if (NET_DEV_REGISTERED(efx) && !netif_running(efx->net_dev))
+ if (efx_dev_registered(efx) && !netif_running(efx->net_dev))
return;
/* Mark the port as enabled so port reconfigurations can start, then
@@ -1073,9 +1065,8 @@
cancel_delayed_work_sync(&efx->monitor_work);
/* Ensure that all RX slow refills are complete. */
- efx_for_each_rx_queue(rx_queue, efx) {
+ efx_for_each_rx_queue(rx_queue, efx)
cancel_delayed_work_sync(&rx_queue->work);
- }
/* Stop scheduled port reconfigurations */
cancel_work_sync(&efx->reconfigure_work);
@@ -1101,9 +1092,10 @@
falcon_disable_interrupts(efx);
if (efx->legacy_irq)
synchronize_irq(efx->legacy_irq);
- efx_for_each_channel_with_interrupt(channel, efx)
+ efx_for_each_channel_with_interrupt(channel, efx) {
if (channel->irq)
synchronize_irq(channel->irq);
+ }
/* Stop all NAPI processing and synchronous rx refills */
efx_for_each_channel(channel, efx)
@@ -1125,7 +1117,7 @@
/* Stop the kernel transmit interface late, so the watchdog
* timer isn't ticking over the flush */
efx_stop_queue(efx);
- if (NET_DEV_REGISTERED(efx)) {
+ if (efx_dev_registered(efx)) {
netif_tx_lock_bh(efx->net_dev);
netif_tx_unlock_bh(efx->net_dev);
}
@@ -1344,13 +1336,17 @@
return 0;
}
-/* Context: process, dev_base_lock held, non-blocking. */
+/* Context: process, dev_base_lock or RTNL held, non-blocking. */
static struct net_device_stats *efx_net_stats(struct net_device *net_dev)
{
struct efx_nic *efx = net_dev->priv;
struct efx_mac_stats *mac_stats = &efx->mac_stats;
struct net_device_stats *stats = &net_dev->stats;
+ /* Update stats if possible, but do not wait if another thread
+ * is updating them (or resetting the NIC); slightly stale
+ * stats are acceptable.
+ */
if (!spin_trylock(&efx->stats_lock))
return stats;
if (efx->state == STATE_RUNNING) {
@@ -1494,7 +1490,7 @@
static int efx_netdev_event(struct notifier_block *this,
unsigned long event, void *ptr)
{
- struct net_device *net_dev = (struct net_device *)ptr;
+ struct net_device *net_dev = ptr;
if (net_dev->open == efx_net_open && event == NETDEV_CHANGENAME) {
struct efx_nic *efx = net_dev->priv;
@@ -1563,7 +1559,7 @@
efx_for_each_tx_queue(tx_queue, efx)
efx_release_tx_buffers(tx_queue);
- if (NET_DEV_REGISTERED(efx)) {
+ if (efx_dev_registered(efx)) {
strlcpy(efx->name, pci_name(efx->pci_dev), sizeof(efx->name));
unregister_netdev(efx->net_dev);
}
@@ -1688,7 +1684,7 @@
if (method == RESET_TYPE_DISABLE) {
/* Reinitialise the device anyway so the driver unload sequence
* can talk to the external SRAM */
- (void) falcon_init_nic(efx);
+ falcon_init_nic(efx);
rc = -EIO;
goto fail4;
}
@@ -1873,6 +1869,7 @@
tx_queue->queue = i;
tx_queue->buffer = NULL;
tx_queue->channel = &efx->channel[0]; /* for safety */
+ tx_queue->tso_headers_free = NULL;
}
for (i = 0; i < EFX_MAX_RX_QUEUES; i++) {
rx_queue = &efx->rx_queue[i];
@@ -2071,7 +2068,8 @@
net_dev = alloc_etherdev(sizeof(*efx));
if (!net_dev)
return -ENOMEM;
- net_dev->features |= NETIF_F_IP_CSUM | NETIF_F_SG | NETIF_F_HIGHDMA;
+ net_dev->features |= (NETIF_F_IP_CSUM | NETIF_F_SG |
+ NETIF_F_HIGHDMA | NETIF_F_TSO);
if (lro)
net_dev->features |= NETIF_F_LRO;
efx = net_dev->priv;
diff --git a/drivers/net/sfc/enum.h b/drivers/net/sfc/enum.h
index 43663a4..c53290d 100644
--- a/drivers/net/sfc/enum.h
+++ b/drivers/net/sfc/enum.h
@@ -10,6 +10,55 @@
#ifndef EFX_ENUM_H
#define EFX_ENUM_H
+/**
+ * enum efx_loopback_mode - loopback modes
+ * @LOOPBACK_NONE: no loopback
+ * @LOOPBACK_XGMII: loopback within MAC at XGMII level
+ * @LOOPBACK_XGXS: loopback within MAC at XGXS level
+ * @LOOPBACK_XAUI: loopback within MAC at XAUI level
+ * @LOOPBACK_PHYXS: loopback within PHY at PHYXS level
+ * @LOOPBACK_PCS: loopback within PHY at PCS level
+ * @LOOPBACK_PMAPMD: loopback within PHY at PMAPMD level
+ * @LOOPBACK_NETWORK: reflecting loopback (even further than furthest!)
+ */
+/* Please keep in order and up-to-date w.r.t the following two #defines */
+enum efx_loopback_mode {
+ LOOPBACK_NONE = 0,
+ LOOPBACK_MAC = 1,
+ LOOPBACK_XGMII = 2,
+ LOOPBACK_XGXS = 3,
+ LOOPBACK_XAUI = 4,
+ LOOPBACK_PHY = 5,
+ LOOPBACK_PHYXS = 6,
+ LOOPBACK_PCS = 7,
+ LOOPBACK_PMAPMD = 8,
+ LOOPBACK_NETWORK = 9,
+ LOOPBACK_MAX
+};
+
+#define LOOPBACK_TEST_MAX LOOPBACK_PMAPMD
+
+extern const char *efx_loopback_mode_names[];
+#define LOOPBACK_MODE_NAME(mode) \
+ STRING_TABLE_LOOKUP(mode, efx_loopback_mode)
+#define LOOPBACK_MODE(efx) \
+ LOOPBACK_MODE_NAME(efx->loopback_mode)
+
+/* These loopbacks occur within the controller */
+#define LOOPBACKS_10G_INTERNAL ((1 << LOOPBACK_XGMII)| \
+ (1 << LOOPBACK_XGXS) | \
+ (1 << LOOPBACK_XAUI))
+
+#define LOOPBACK_MASK(_efx) \
+ (1 << (_efx)->loopback_mode)
+
+#define LOOPBACK_INTERNAL(_efx) \
+ ((LOOPBACKS_10G_INTERNAL & LOOPBACK_MASK(_efx)) ? 1 : 0)
+
+#define LOOPBACK_OUT_OF(_from, _to, _mask) \
+ (((LOOPBACK_MASK(_from) & (_mask)) && \
+ ((LOOPBACK_MASK(_to) & (_mask)) == 0)) ? 1 : 0)
+
/*****************************************************************************/
/**
diff --git a/drivers/net/sfc/ethtool.c b/drivers/net/sfc/ethtool.c
index ad541ba..e2c75d1 100644
--- a/drivers/net/sfc/ethtool.c
+++ b/drivers/net/sfc/ethtool.c
@@ -12,12 +12,26 @@
#include <linux/ethtool.h>
#include <linux/rtnetlink.h>
#include "net_driver.h"
+#include "selftest.h"
#include "efx.h"
#include "ethtool.h"
#include "falcon.h"
#include "gmii.h"
#include "mac.h"
+const char *efx_loopback_mode_names[] = {
+ [LOOPBACK_NONE] = "NONE",
+ [LOOPBACK_MAC] = "MAC",
+ [LOOPBACK_XGMII] = "XGMII",
+ [LOOPBACK_XGXS] = "XGXS",
+ [LOOPBACK_XAUI] = "XAUI",
+ [LOOPBACK_PHY] = "PHY",
+ [LOOPBACK_PHYXS] = "PHY(XS)",
+ [LOOPBACK_PCS] = "PHY(PCS)",
+ [LOOPBACK_PMAPMD] = "PHY(PMAPMD)",
+ [LOOPBACK_NETWORK] = "NETWORK",
+};
+
static int efx_ethtool_set_tx_csum(struct net_device *net_dev, u32 enable);
struct ethtool_string {
@@ -217,23 +231,179 @@
strlcpy(info->bus_info, pci_name(efx->pci_dev), sizeof(info->bus_info));
}
+/**
+ * efx_fill_test - fill in an individual self-test entry
+ * @test_index: Index of the test
+ * @strings: Ethtool strings, or %NULL
+ * @data: Ethtool test results, or %NULL
+ * @test: Pointer to test result (used only if data != %NULL)
+ * @unit_format: Unit name format (e.g. "channel\%d")
+ * @unit_id: Unit id (e.g. 0 for "channel0")
+ * @test_format: Test name format (e.g. "loopback.\%s.tx.sent")
+ * @test_id: Test id (e.g. "PHY" for "loopback.PHY.tx_sent")
+ *
+ * Fill in an individual self-test entry.
+ */
+static void efx_fill_test(unsigned int test_index,
+ struct ethtool_string *strings, u64 *data,
+ int *test, const char *unit_format, int unit_id,
+ const char *test_format, const char *test_id)
+{
+ struct ethtool_string unit_str, test_str;
+
+ /* Fill data value, if applicable */
+ if (data)
+ data[test_index] = *test;
+
+ /* Fill string, if applicable */
+ if (strings) {
+ snprintf(unit_str.name, sizeof(unit_str.name),
+ unit_format, unit_id);
+ snprintf(test_str.name, sizeof(test_str.name),
+ test_format, test_id);
+ snprintf(strings[test_index].name,
+ sizeof(strings[test_index].name),
+ "%-9s%-17s", unit_str.name, test_str.name);
+ }
+}
+
+#define EFX_PORT_NAME "port%d", 0
+#define EFX_CHANNEL_NAME(_channel) "channel%d", _channel->channel
+#define EFX_TX_QUEUE_NAME(_tx_queue) "txq%d", _tx_queue->queue
+#define EFX_RX_QUEUE_NAME(_rx_queue) "rxq%d", _rx_queue->queue
+#define EFX_LOOPBACK_NAME(_mode, _counter) \
+ "loopback.%s." _counter, LOOPBACK_MODE_NAME(mode)
+
+/**
+ * efx_fill_loopback_test - fill in a block of loopback self-test entries
+ * @efx: Efx NIC
+ * @lb_tests: Efx loopback self-test results structure
+ * @mode: Loopback test mode
+ * @test_index: Starting index of the test
+ * @strings: Ethtool strings, or %NULL
+ * @data: Ethtool test results, or %NULL
+ */
+static int efx_fill_loopback_test(struct efx_nic *efx,
+ struct efx_loopback_self_tests *lb_tests,
+ enum efx_loopback_mode mode,
+ unsigned int test_index,
+ struct ethtool_string *strings, u64 *data)
+{
+ struct efx_tx_queue *tx_queue;
+
+ efx_for_each_tx_queue(tx_queue, efx) {
+ efx_fill_test(test_index++, strings, data,
+ &lb_tests->tx_sent[tx_queue->queue],
+ EFX_TX_QUEUE_NAME(tx_queue),
+ EFX_LOOPBACK_NAME(mode, "tx_sent"));
+ efx_fill_test(test_index++, strings, data,
+ &lb_tests->tx_done[tx_queue->queue],
+ EFX_TX_QUEUE_NAME(tx_queue),
+ EFX_LOOPBACK_NAME(mode, "tx_done"));
+ }
+ efx_fill_test(test_index++, strings, data,
+ &lb_tests->rx_good,
+ EFX_PORT_NAME,
+ EFX_LOOPBACK_NAME(mode, "rx_good"));
+ efx_fill_test(test_index++, strings, data,
+ &lb_tests->rx_bad,
+ EFX_PORT_NAME,
+ EFX_LOOPBACK_NAME(mode, "rx_bad"));
+
+ return test_index;
+}
+
+/**
+ * efx_ethtool_fill_self_tests - get self-test details
+ * @efx: Efx NIC
+ * @tests: Efx self-test results structure, or %NULL
+ * @strings: Ethtool strings, or %NULL
+ * @data: Ethtool test results, or %NULL
+ */
+static int efx_ethtool_fill_self_tests(struct efx_nic *efx,
+ struct efx_self_tests *tests,
+ struct ethtool_string *strings,
+ u64 *data)
+{
+ struct efx_channel *channel;
+ unsigned int n = 0;
+ enum efx_loopback_mode mode;
+
+ /* Interrupt */
+ efx_fill_test(n++, strings, data, &tests->interrupt,
+ "core", 0, "interrupt", NULL);
+
+ /* Event queues */
+ efx_for_each_channel(channel, efx) {
+ efx_fill_test(n++, strings, data,
+ &tests->eventq_dma[channel->channel],
+ EFX_CHANNEL_NAME(channel),
+ "eventq.dma", NULL);
+ efx_fill_test(n++, strings, data,
+ &tests->eventq_int[channel->channel],
+ EFX_CHANNEL_NAME(channel),
+ "eventq.int", NULL);
+ efx_fill_test(n++, strings, data,
+ &tests->eventq_poll[channel->channel],
+ EFX_CHANNEL_NAME(channel),
+ "eventq.poll", NULL);
+ }
+
+ /* PHY presence */
+ efx_fill_test(n++, strings, data, &tests->phy_ok,
+ EFX_PORT_NAME, "phy_ok", NULL);
+
+ /* Loopback tests */
+ efx_fill_test(n++, strings, data, &tests->loopback_speed,
+ EFX_PORT_NAME, "loopback.speed", NULL);
+ efx_fill_test(n++, strings, data, &tests->loopback_full_duplex,
+ EFX_PORT_NAME, "loopback.full_duplex", NULL);
+ for (mode = LOOPBACK_NONE; mode < LOOPBACK_TEST_MAX; mode++) {
+ if (!(efx->loopback_modes & (1 << mode)))
+ continue;
+ n = efx_fill_loopback_test(efx,
+ &tests->loopback[mode], mode, n,
+ strings, data);
+ }
+
+ return n;
+}
+
static int efx_ethtool_get_stats_count(struct net_device *net_dev)
{
return EFX_ETHTOOL_NUM_STATS;
}
+static int efx_ethtool_self_test_count(struct net_device *net_dev)
+{
+ struct efx_nic *efx = net_dev->priv;
+
+ return efx_ethtool_fill_self_tests(efx, NULL, NULL, NULL);
+}
+
static void efx_ethtool_get_strings(struct net_device *net_dev,
u32 string_set, u8 *strings)
{
+ struct efx_nic *efx = net_dev->priv;
struct ethtool_string *ethtool_strings =
(struct ethtool_string *)strings;
int i;
- if (string_set == ETH_SS_STATS)
+ switch (string_set) {
+ case ETH_SS_STATS:
for (i = 0; i < EFX_ETHTOOL_NUM_STATS; i++)
strncpy(ethtool_strings[i].name,
efx_ethtool_stats[i].name,
sizeof(ethtool_strings[i].name));
+ break;
+ case ETH_SS_TEST:
+ efx_ethtool_fill_self_tests(efx, NULL,
+ ethtool_strings, NULL);
+ break;
+ default:
+ /* No other string sets */
+ break;
+ }
}
static void efx_ethtool_get_stats(struct net_device *net_dev,
@@ -272,6 +442,22 @@
}
}
+static int efx_ethtool_set_tso(struct net_device *net_dev, u32 enable)
+{
+ int rc;
+
+ /* Our TSO requires TX checksumming, so force TX checksumming
+ * on when TSO is enabled.
+ */
+ if (enable) {
+ rc = efx_ethtool_set_tx_csum(net_dev, 1);
+ if (rc)
+ return rc;
+ }
+
+ return ethtool_op_set_tso(net_dev, enable);
+}
+
static int efx_ethtool_set_tx_csum(struct net_device *net_dev, u32 enable)
{
struct efx_nic *efx = net_dev->priv;
@@ -283,6 +469,15 @@
efx_flush_queues(efx);
+ /* Our TSO requires TX checksumming, so disable TSO when
+ * checksumming is disabled
+ */
+ if (!enable) {
+ rc = efx_ethtool_set_tso(net_dev, 0);
+ if (rc)
+ return rc;
+ }
+
return 0;
}
@@ -305,6 +500,64 @@
return efx->rx_checksum_enabled;
}
+static void efx_ethtool_self_test(struct net_device *net_dev,
+ struct ethtool_test *test, u64 *data)
+{
+ struct efx_nic *efx = net_dev->priv;
+ struct efx_self_tests efx_tests;
+ int offline, already_up;
+ int rc;
+
+ ASSERT_RTNL();
+ if (efx->state != STATE_RUNNING) {
+ rc = -EIO;
+ goto fail1;
+ }
+
+ /* We need rx buffers and interrupts. */
+ already_up = (efx->net_dev->flags & IFF_UP);
+ if (!already_up) {
+ rc = dev_open(efx->net_dev);
+ if (rc) {
+ EFX_ERR(efx, "failed opening device.\n");
+ goto fail2;
+ }
+ }
+
+ memset(&efx_tests, 0, sizeof(efx_tests));
+ offline = (test->flags & ETH_TEST_FL_OFFLINE);
+
+ /* Perform online self tests first */
+ rc = efx_online_test(efx, &efx_tests);
+ if (rc)
+ goto out;
+
+ /* Perform offline tests only if online tests passed */
+ if (offline) {
+ /* Stop the kernel from sending packets during the test. */
+ efx_stop_queue(efx);
+ rc = efx_flush_queues(efx);
+ if (!rc)
+ rc = efx_offline_test(efx, &efx_tests,
+ efx->loopback_modes);
+ efx_wake_queue(efx);
+ }
+
+ out:
+ if (!already_up)
+ dev_close(efx->net_dev);
+
+ EFX_LOG(efx, "%s all %sline self-tests\n",
+ rc == 0 ? "passed" : "failed", offline ? "off" : "on");
+
+ fail2:
+ fail1:
+ /* Fill ethtool results structures */
+ efx_ethtool_fill_self_tests(efx, &efx_tests, NULL, data);
+ if (rc)
+ test->flags |= ETH_TEST_FL_FAILED;
+}
+
/* Restart autonegotiation */
static int efx_ethtool_nway_reset(struct net_device *net_dev)
{
@@ -451,8 +704,12 @@
.set_tx_csum = efx_ethtool_set_tx_csum,
.get_sg = ethtool_op_get_sg,
.set_sg = ethtool_op_set_sg,
+ .get_tso = ethtool_op_get_tso,
+ .set_tso = efx_ethtool_set_tso,
.get_flags = ethtool_op_get_flags,
.set_flags = ethtool_op_set_flags,
+ .self_test_count = efx_ethtool_self_test_count,
+ .self_test = efx_ethtool_self_test,
.get_strings = efx_ethtool_get_strings,
.phys_id = efx_ethtool_phys_id,
.get_stats_count = efx_ethtool_get_stats_count,
diff --git a/drivers/net/sfc/falcon.c b/drivers/net/sfc/falcon.c
index 46db549..790db89 100644
--- a/drivers/net/sfc/falcon.c
+++ b/drivers/net/sfc/falcon.c
@@ -116,17 +116,8 @@
**************************************************************************
*/
-/* DMA address mask (up to 46-bit, avoiding compiler warnings)
- *
- * Note that it is possible to have a platform with 64-bit longs and
- * 32-bit DMA addresses, or vice versa. EFX_DMA_MASK takes care of the
- * platform DMA mask.
- */
-#if BITS_PER_LONG == 64
-#define FALCON_DMA_MASK EFX_DMA_MASK(0x00003fffffffffffUL)
-#else
-#define FALCON_DMA_MASK EFX_DMA_MASK(0x00003fffffffffffULL)
-#endif
+/* DMA address mask */
+#define FALCON_DMA_MASK DMA_BIT_MASK(46)
/* TX DMA length mask (13-bit) */
#define FALCON_TX_DMA_MASK (4096 - 1)
@@ -145,7 +136,7 @@
#define PCI_EXP_LNKSTA_LNK_WID_LBN 4
#define FALCON_IS_DUAL_FUNC(efx) \
- (FALCON_REV(efx) < FALCON_REV_B0)
+ (falcon_rev(efx) < FALCON_REV_B0)
/**************************************************************************
*
@@ -465,7 +456,7 @@
TX_DESCQ_TYPE, 0,
TX_NON_IP_DROP_DIS_B0, 1);
- if (FALCON_REV(efx) >= FALCON_REV_B0) {
+ if (falcon_rev(efx) >= FALCON_REV_B0) {
int csum = !(efx->net_dev->features & NETIF_F_IP_CSUM);
EFX_SET_OWORD_FIELD(tx_desc_ptr, TX_IP_CHKSM_DIS_B0, csum);
EFX_SET_OWORD_FIELD(tx_desc_ptr, TX_TCP_CHKSM_DIS_B0, csum);
@@ -474,7 +465,7 @@
falcon_write_table(efx, &tx_desc_ptr, efx->type->txd_ptr_tbl_base,
tx_queue->queue);
- if (FALCON_REV(efx) < FALCON_REV_B0) {
+ if (falcon_rev(efx) < FALCON_REV_B0) {
efx_oword_t reg;
BUG_ON(tx_queue->queue >= 128); /* HW limit */
@@ -635,7 +626,7 @@
efx_oword_t rx_desc_ptr;
struct efx_nic *efx = rx_queue->efx;
int rc;
- int is_b0 = FALCON_REV(efx) >= FALCON_REV_B0;
+ int is_b0 = falcon_rev(efx) >= FALCON_REV_B0;
int iscsi_digest_en = is_b0;
EFX_LOG(efx, "RX queue %d ring in special buffers %d-%d\n",
@@ -742,8 +733,10 @@
continue;
break;
}
- if (rc)
+ if (rc) {
EFX_ERR(efx, "failed to flush rx queue %d\n", rx_queue->queue);
+ efx_schedule_reset(efx, RESET_TYPE_INVISIBLE);
+ }
/* Remove RX descriptor ring from card */
EFX_ZERO_OWORD(rx_desc_ptr);
@@ -822,10 +815,10 @@
tx_ev_q_label = EFX_QWORD_FIELD(*event, TX_EV_Q_LABEL);
tx_queue = &efx->tx_queue[tx_ev_q_label];
- if (NET_DEV_REGISTERED(efx))
+ if (efx_dev_registered(efx))
netif_tx_lock(efx->net_dev);
falcon_notify_tx_desc(tx_queue);
- if (NET_DEV_REGISTERED(efx))
+ if (efx_dev_registered(efx))
netif_tx_unlock(efx->net_dev);
} else if (EFX_QWORD_FIELD(*event, TX_EV_PKT_ERR) &&
EFX_WORKAROUND_10727(efx)) {
@@ -884,7 +877,7 @@
RX_EV_TCP_UDP_CHKSUM_ERR);
rx_ev_eth_crc_err = EFX_QWORD_FIELD(*event, RX_EV_ETH_CRC_ERR);
rx_ev_frm_trunc = EFX_QWORD_FIELD(*event, RX_EV_FRM_TRUNC);
- rx_ev_drib_nib = ((FALCON_REV(efx) >= FALCON_REV_B0) ?
+ rx_ev_drib_nib = ((falcon_rev(efx) >= FALCON_REV_B0) ?
0 : EFX_QWORD_FIELD(*event, RX_EV_DRIB_NIB));
rx_ev_pause_frm = EFX_QWORD_FIELD(*event, RX_EV_PAUSE_FRM_ERR);
@@ -1065,7 +1058,7 @@
EFX_QWORD_FIELD(*event, XG_PHY_INTR))
is_phy_event = 1;
- if ((FALCON_REV(efx) >= FALCON_REV_B0) &&
+ if ((falcon_rev(efx) >= FALCON_REV_B0) &&
EFX_OWORD_FIELD(*event, XG_MNT_INTR_B0))
is_phy_event = 1;
@@ -1129,6 +1122,7 @@
case RX_RECOVERY_EV_DECODE:
EFX_ERR(efx, "channel %d seen DRIVER RX_RESET event. "
"Resetting.\n", channel->channel);
+ atomic_inc(&efx->rx_reset);
efx_schedule_reset(efx,
EFX_WORKAROUND_6555(efx) ?
RESET_TYPE_RX_RECOVERY :
@@ -1404,7 +1398,7 @@
static irqreturn_t falcon_fatal_interrupt(struct efx_nic *efx)
{
struct falcon_nic_data *nic_data = efx->nic_data;
- efx_oword_t *int_ker = (efx_oword_t *) efx->irq_status.addr;
+ efx_oword_t *int_ker = efx->irq_status.addr;
efx_oword_t fatal_intr;
int error, mem_perr;
static int n_int_errors;
@@ -1450,8 +1444,8 @@
*/
static irqreturn_t falcon_legacy_interrupt_b0(int irq, void *dev_id)
{
- struct efx_nic *efx = (struct efx_nic *)dev_id;
- efx_oword_t *int_ker = (efx_oword_t *) efx->irq_status.addr;
+ struct efx_nic *efx = dev_id;
+ efx_oword_t *int_ker = efx->irq_status.addr;
struct efx_channel *channel;
efx_dword_t reg;
u32 queues;
@@ -1488,8 +1482,8 @@
static irqreturn_t falcon_legacy_interrupt_a1(int irq, void *dev_id)
{
- struct efx_nic *efx = (struct efx_nic *)dev_id;
- efx_oword_t *int_ker = (efx_oword_t *) efx->irq_status.addr;
+ struct efx_nic *efx = dev_id;
+ efx_oword_t *int_ker = efx->irq_status.addr;
struct efx_channel *channel;
int syserr;
int queues;
@@ -1541,9 +1535,9 @@
*/
static irqreturn_t falcon_msi_interrupt(int irq, void *dev_id)
{
- struct efx_channel *channel = (struct efx_channel *)dev_id;
+ struct efx_channel *channel = dev_id;
struct efx_nic *efx = channel->efx;
- efx_oword_t *int_ker = (efx_oword_t *) efx->irq_status.addr;
+ efx_oword_t *int_ker = efx->irq_status.addr;
int syserr;
efx->last_irq_cpu = raw_smp_processor_id();
@@ -1571,7 +1565,7 @@
unsigned long offset;
efx_dword_t dword;
- if (FALCON_REV(efx) < FALCON_REV_B0)
+ if (falcon_rev(efx) < FALCON_REV_B0)
return;
for (offset = RX_RSS_INDIR_TBL_B0;
@@ -1594,7 +1588,7 @@
if (!EFX_INT_MODE_USE_MSI(efx)) {
irq_handler_t handler;
- if (FALCON_REV(efx) >= FALCON_REV_B0)
+ if (falcon_rev(efx) >= FALCON_REV_B0)
handler = falcon_legacy_interrupt_b0;
else
handler = falcon_legacy_interrupt_a1;
@@ -1635,12 +1629,13 @@
efx_oword_t reg;
/* Disable MSI/MSI-X interrupts */
- efx_for_each_channel_with_interrupt(channel, efx)
+ efx_for_each_channel_with_interrupt(channel, efx) {
if (channel->irq)
free_irq(channel->irq, channel);
+ }
/* ACK legacy interrupt */
- if (FALCON_REV(efx) >= FALCON_REV_B0)
+ if (falcon_rev(efx) >= FALCON_REV_B0)
falcon_read(efx, ®, INT_ISR0_B0);
else
falcon_irq_ack_a1(efx);
@@ -1731,7 +1726,8 @@
efx_oword_t temp;
int count;
- if (FALCON_REV(efx) < FALCON_REV_B0)
+ if ((falcon_rev(efx) < FALCON_REV_B0) ||
+ (efx->loopback_mode != LOOPBACK_NONE))
return;
falcon_read(efx, &temp, MAC0_CTRL_REG_KER);
@@ -1783,7 +1779,7 @@
{
efx_oword_t temp;
- if (FALCON_REV(efx) < FALCON_REV_B0)
+ if (falcon_rev(efx) < FALCON_REV_B0)
return;
/* Isolate the MAC -> RX */
@@ -1821,7 +1817,7 @@
MAC_SPEED, link_speed);
/* On B0, MAC backpressure can be disabled and packets get
* discarded. */
- if (FALCON_REV(efx) >= FALCON_REV_B0) {
+ if (falcon_rev(efx) >= FALCON_REV_B0) {
EFX_SET_OWORD_FIELD(reg, TXFIFO_DRAIN_EN_B0,
!efx->link_up);
}
@@ -1839,7 +1835,7 @@
EFX_SET_OWORD_FIELD_VER(efx, reg, RX_XOFF_MAC_EN, tx_fc);
/* Unisolate the MAC -> RX */
- if (FALCON_REV(efx) >= FALCON_REV_B0)
+ if (falcon_rev(efx) >= FALCON_REV_B0)
EFX_SET_OWORD_FIELD(reg, RX_INGR_EN_B0, 1);
falcon_write(efx, ®, RX_CFG_REG_KER);
}
@@ -1854,7 +1850,7 @@
return 0;
/* Statistics fetch will fail if the MAC is in TX drain */
- if (FALCON_REV(efx) >= FALCON_REV_B0) {
+ if (falcon_rev(efx) >= FALCON_REV_B0) {
efx_oword_t temp;
falcon_read(efx, &temp, MAC0_CTRL_REG_KER);
if (EFX_OWORD_FIELD(temp, TXFIFO_DRAIN_EN_B0))
@@ -1938,7 +1934,7 @@
static void falcon_mdio_write(struct net_device *net_dev, int phy_id,
int addr, int value)
{
- struct efx_nic *efx = (struct efx_nic *)net_dev->priv;
+ struct efx_nic *efx = net_dev->priv;
unsigned int phy_id2 = phy_id & FALCON_PHY_ID_ID_MASK;
efx_oword_t reg;
@@ -2006,7 +2002,7 @@
* could be read, -1 will be returned. */
static int falcon_mdio_read(struct net_device *net_dev, int phy_id, int addr)
{
- struct efx_nic *efx = (struct efx_nic *)net_dev->priv;
+ struct efx_nic *efx = net_dev->priv;
unsigned int phy_addr = phy_id & FALCON_PHY_ID_ID_MASK;
efx_oword_t reg;
int value = -1;
@@ -2091,6 +2087,8 @@
efx->phy_type);
return -1;
}
+
+ efx->loopback_modes = LOOPBACKS_10G_INTERNAL | efx->phy_op->loopbacks;
return 0;
}
@@ -2109,7 +2107,7 @@
falcon_init_mdio(&efx->mii);
/* Hardware flow ctrl. FalconA RX FIFO too small for pause generation */
- if (FALCON_REV(efx) >= FALCON_REV_B0)
+ if (falcon_rev(efx) >= FALCON_REV_B0)
efx->flow_control = EFX_FC_RX | EFX_FC_TX;
else
efx->flow_control = EFX_FC_RX;
@@ -2369,7 +2367,7 @@
return -ENODEV;
}
- switch (FALCON_REV(efx)) {
+ switch (falcon_rev(efx)) {
case FALCON_REV_A0:
case 0xff:
EFX_ERR(efx, "Falcon rev A0 not supported\n");
@@ -2395,7 +2393,7 @@
break;
default:
- EFX_ERR(efx, "Unknown Falcon rev %d\n", FALCON_REV(efx));
+ EFX_ERR(efx, "Unknown Falcon rev %d\n", falcon_rev(efx));
return -ENODEV;
}
@@ -2415,7 +2413,7 @@
/* Allocate storage for hardware specific data */
nic_data = kzalloc(sizeof(*nic_data), GFP_KERNEL);
- efx->nic_data = (void *) nic_data;
+ efx->nic_data = nic_data;
/* Determine number of ports etc. */
rc = falcon_probe_nic_variant(efx);
@@ -2468,14 +2466,12 @@
fail5:
falcon_free_buffer(efx, &efx->irq_status);
fail4:
- /* fall-thru */
fail3:
if (nic_data->pci_dev2) {
pci_dev_put(nic_data->pci_dev2);
nic_data->pci_dev2 = NULL;
}
fail2:
- /* fall-thru */
fail1:
kfree(efx->nic_data);
return rc;
@@ -2487,13 +2483,10 @@
*/
int falcon_init_nic(struct efx_nic *efx)
{
- struct falcon_nic_data *data;
efx_oword_t temp;
unsigned thresh;
int rc;
- data = (struct falcon_nic_data *)efx->nic_data;
-
/* Set up the address region register. This is only needed
* for the B0 FPGA, but since we are just pushing in the
* reset defaults this may as well be unconditional. */
@@ -2560,7 +2553,7 @@
/* Set number of RSS queues for receive path. */
falcon_read(efx, &temp, RX_FILTER_CTL_REG);
- if (FALCON_REV(efx) >= FALCON_REV_B0)
+ if (falcon_rev(efx) >= FALCON_REV_B0)
EFX_SET_OWORD_FIELD(temp, NUM_KER, 0);
else
EFX_SET_OWORD_FIELD(temp, NUM_KER, efx->rss_queues - 1);
@@ -2598,7 +2591,7 @@
/* Prefetch threshold 2 => fetch when descriptor cache half empty */
EFX_SET_OWORD_FIELD(temp, TX_PREF_THRESHOLD, 2);
/* Squash TX of packets of 16 bytes or less */
- if (FALCON_REV(efx) >= FALCON_REV_B0 && EFX_WORKAROUND_9141(efx))
+ if (falcon_rev(efx) >= FALCON_REV_B0 && EFX_WORKAROUND_9141(efx))
EFX_SET_OWORD_FIELD(temp, TX_FLUSH_MIN_LEN_EN_B0, 1);
falcon_write(efx, &temp, TX_CFG2_REG_KER);
@@ -2615,7 +2608,7 @@
if (EFX_WORKAROUND_7575(efx))
EFX_SET_OWORD_FIELD_VER(efx, temp, RX_USR_BUF_SIZE,
(3 * 4096) / 32);
- if (FALCON_REV(efx) >= FALCON_REV_B0)
+ if (falcon_rev(efx) >= FALCON_REV_B0)
EFX_SET_OWORD_FIELD(temp, RX_INGR_EN_B0, 1);
/* RX FIFO flow control thresholds */
@@ -2631,7 +2624,7 @@
falcon_write(efx, &temp, RX_CFG_REG_KER);
/* Set destination of both TX and RX Flush events */
- if (FALCON_REV(efx) >= FALCON_REV_B0) {
+ if (falcon_rev(efx) >= FALCON_REV_B0) {
EFX_POPULATE_OWORD_1(temp, FLS_EVQ_ID, 0);
falcon_write(efx, &temp, DP_CTRL_REG);
}
@@ -2645,7 +2638,7 @@
falcon_free_buffer(efx, &efx->irq_status);
- (void) falcon_reset_hw(efx, RESET_TYPE_ALL);
+ falcon_reset_hw(efx, RESET_TYPE_ALL);
/* Release the second function after the reset */
if (nic_data->pci_dev2) {
diff --git a/drivers/net/sfc/falcon.h b/drivers/net/sfc/falcon.h
index 6117403..492f9bc 100644
--- a/drivers/net/sfc/falcon.h
+++ b/drivers/net/sfc/falcon.h
@@ -23,7 +23,10 @@
FALCON_REV_B0 = 2,
};
-#define FALCON_REV(efx) ((efx)->pci_dev->revision)
+static inline int falcon_rev(struct efx_nic *efx)
+{
+ return efx->pci_dev->revision;
+}
extern struct efx_nic_type falcon_a_nic_type;
extern struct efx_nic_type falcon_b_nic_type;
diff --git a/drivers/net/sfc/falcon_hwdefs.h b/drivers/net/sfc/falcon_hwdefs.h
index 0485a63..6d00311 100644
--- a/drivers/net/sfc/falcon_hwdefs.h
+++ b/drivers/net/sfc/falcon_hwdefs.h
@@ -636,6 +636,14 @@
#define XX_HIDRVA_WIDTH 1
#define XX_LODRVA_LBN 8
#define XX_LODRVA_WIDTH 1
+#define XX_LPBKD_LBN 3
+#define XX_LPBKD_WIDTH 1
+#define XX_LPBKC_LBN 2
+#define XX_LPBKC_WIDTH 1
+#define XX_LPBKB_LBN 1
+#define XX_LPBKB_WIDTH 1
+#define XX_LPBKA_LBN 0
+#define XX_LPBKA_WIDTH 1
#define XX_TXDRV_CTL_REG_MAC 0x12
#define XX_DEQD_LBN 28
@@ -656,8 +664,14 @@
#define XX_DTXA_WIDTH 4
/* XAUI XGXS core status register */
-#define XX_FORCE_SIG_DECODE_FORCED 0xff
#define XX_CORE_STAT_REG_MAC 0x16
+#define XX_FORCE_SIG_LBN 24
+#define XX_FORCE_SIG_WIDTH 8
+#define XX_FORCE_SIG_DECODE_FORCED 0xff
+#define XX_XGXS_LB_EN_LBN 23
+#define XX_XGXS_LB_EN_WIDTH 1
+#define XX_XGMII_LB_EN_LBN 22
+#define XX_XGMII_LB_EN_WIDTH 1
#define XX_ALIGN_DONE_LBN 20
#define XX_ALIGN_DONE_WIDTH 1
#define XX_SYNC_STAT_LBN 16
@@ -1111,7 +1125,7 @@
u8 port1_phy_type;
__le16 asic_sub_revision;
__le16 board_revision;
-} __attribute__ ((packed));
+} __packed;
#define NVCONFIG_BASE 0x300
#define NVCONFIG_BOARD_MAGIC_NUM 0xFA1C
@@ -1130,6 +1144,6 @@
__le16 board_struct_ver;
__le16 board_checksum;
struct falcon_nvconfig_board_v2 board_v2;
-} __attribute__ ((packed));
+} __packed;
#endif /* EFX_FALCON_HWDEFS_H */
diff --git a/drivers/net/sfc/falcon_io.h b/drivers/net/sfc/falcon_io.h
index ea08184..6670cdf 100644
--- a/drivers/net/sfc/falcon_io.h
+++ b/drivers/net/sfc/falcon_io.h
@@ -56,14 +56,27 @@
#define FALCON_USE_QWORD_IO 1
#endif
-#define _falcon_writeq(efx, value, reg) \
- __raw_writeq((__force u64) (value), (efx)->membase + (reg))
-#define _falcon_writel(efx, value, reg) \
- __raw_writel((__force u32) (value), (efx)->membase + (reg))
-#define _falcon_readq(efx, reg) \
- ((__force __le64) __raw_readq((efx)->membase + (reg)))
-#define _falcon_readl(efx, reg) \
- ((__force __le32) __raw_readl((efx)->membase + (reg)))
+#ifdef FALCON_USE_QWORD_IO
+static inline void _falcon_writeq(struct efx_nic *efx, __le64 value,
+ unsigned int reg)
+{
+ __raw_writeq((__force u64)value, efx->membase + reg);
+}
+static inline __le64 _falcon_readq(struct efx_nic *efx, unsigned int reg)
+{
+ return (__force __le64)__raw_readq(efx->membase + reg);
+}
+#endif
+
+static inline void _falcon_writel(struct efx_nic *efx, __le32 value,
+ unsigned int reg)
+{
+ __raw_writel((__force u32)value, efx->membase + reg);
+}
+static inline __le32 _falcon_readl(struct efx_nic *efx, unsigned int reg)
+{
+ return (__force __le32)__raw_readl(efx->membase + reg);
+}
/* Writes to a normal 16-byte Falcon register, locking as appropriate. */
static inline void falcon_write(struct efx_nic *efx, efx_oword_t *value,
diff --git a/drivers/net/sfc/falcon_xmac.c b/drivers/net/sfc/falcon_xmac.c
index aa7521b..55c0d97 100644
--- a/drivers/net/sfc/falcon_xmac.c
+++ b/drivers/net/sfc/falcon_xmac.c
@@ -32,7 +32,7 @@
(FALCON_XMAC_REGBANK + ((mac_reg) * FALCON_XMAC_REG_SIZE))
void falcon_xmac_writel(struct efx_nic *efx,
- efx_dword_t *value, unsigned int mac_reg)
+ efx_dword_t *value, unsigned int mac_reg)
{
efx_oword_t temp;
@@ -69,6 +69,10 @@
udelay(10);
}
+ /* This often fails when DSP is disabled, ignore it */
+ if (sfe4001_phy_flash_cfg != 0)
+ return 0;
+
EFX_ERR(efx, "timed out waiting for XMAC core reset\n");
return -ETIMEDOUT;
}
@@ -217,13 +221,13 @@
{
efx_dword_t reg;
- if (FALCON_REV(efx) < FALCON_REV_B0)
+ if (falcon_rev(efx) < FALCON_REV_B0)
return 1;
/* The ISR latches, so clear it and re-read */
falcon_xmac_readl(efx, ®, XM_MGT_INT_REG_MAC_B0);
falcon_xmac_readl(efx, ®, XM_MGT_INT_REG_MAC_B0);
-
+
if (EFX_DWORD_FIELD(reg, XM_LCLFLT) ||
EFX_DWORD_FIELD(reg, XM_RMTFLT)) {
EFX_INFO(efx, "MGT_INT: "EFX_DWORD_FMT"\n", EFX_DWORD_VAL(reg));
@@ -237,7 +241,7 @@
{
efx_dword_t reg;
- if (FALCON_REV(efx) < FALCON_REV_B0)
+ if ((falcon_rev(efx) < FALCON_REV_B0) || LOOPBACK_INTERNAL(efx))
return;
/* Flush the ISR */
@@ -284,6 +288,9 @@
efx_dword_t reg;
int align_done, sync_status, link_ok = 0;
+ if (LOOPBACK_INTERNAL(efx))
+ return 1;
+
/* Read link status */
falcon_xmac_readl(efx, ®, XX_CORE_STAT_REG_MAC);
@@ -374,6 +381,61 @@
falcon_xmac_writel(efx, ®, XM_ADR_HI_REG_MAC);
}
+static void falcon_reconfigure_xgxs_core(struct efx_nic *efx)
+{
+ efx_dword_t reg;
+ int xgxs_loopback = (efx->loopback_mode == LOOPBACK_XGXS) ? 1 : 0;
+ int xaui_loopback = (efx->loopback_mode == LOOPBACK_XAUI) ? 1 : 0;
+ int xgmii_loopback =
+ (efx->loopback_mode == LOOPBACK_XGMII) ? 1 : 0;
+
+ /* XGXS block is flaky and will need to be reset if moving
+ * into our out of XGMII, XGXS or XAUI loopbacks. */
+ if (EFX_WORKAROUND_5147(efx)) {
+ int old_xgmii_loopback, old_xgxs_loopback, old_xaui_loopback;
+ int reset_xgxs;
+
+ falcon_xmac_readl(efx, ®, XX_CORE_STAT_REG_MAC);
+ old_xgxs_loopback = EFX_DWORD_FIELD(reg, XX_XGXS_LB_EN);
+ old_xgmii_loopback = EFX_DWORD_FIELD(reg, XX_XGMII_LB_EN);
+
+ falcon_xmac_readl(efx, ®, XX_SD_CTL_REG_MAC);
+ old_xaui_loopback = EFX_DWORD_FIELD(reg, XX_LPBKA);
+
+ /* The PHY driver may have turned XAUI off */
+ reset_xgxs = ((xgxs_loopback != old_xgxs_loopback) ||
+ (xaui_loopback != old_xaui_loopback) ||
+ (xgmii_loopback != old_xgmii_loopback));
+ if (reset_xgxs) {
+ falcon_xmac_readl(efx, ®, XX_PWR_RST_REG_MAC);
+ EFX_SET_DWORD_FIELD(reg, XX_RSTXGXSTX_EN, 1);
+ EFX_SET_DWORD_FIELD(reg, XX_RSTXGXSRX_EN, 1);
+ falcon_xmac_writel(efx, ®, XX_PWR_RST_REG_MAC);
+ udelay(1);
+ EFX_SET_DWORD_FIELD(reg, XX_RSTXGXSTX_EN, 0);
+ EFX_SET_DWORD_FIELD(reg, XX_RSTXGXSRX_EN, 0);
+ falcon_xmac_writel(efx, ®, XX_PWR_RST_REG_MAC);
+ udelay(1);
+ }
+ }
+
+ falcon_xmac_readl(efx, ®, XX_CORE_STAT_REG_MAC);
+ EFX_SET_DWORD_FIELD(reg, XX_FORCE_SIG,
+ (xgxs_loopback || xaui_loopback) ?
+ XX_FORCE_SIG_DECODE_FORCED : 0);
+ EFX_SET_DWORD_FIELD(reg, XX_XGXS_LB_EN, xgxs_loopback);
+ EFX_SET_DWORD_FIELD(reg, XX_XGMII_LB_EN, xgmii_loopback);
+ falcon_xmac_writel(efx, ®, XX_CORE_STAT_REG_MAC);
+
+ falcon_xmac_readl(efx, ®, XX_SD_CTL_REG_MAC);
+ EFX_SET_DWORD_FIELD(reg, XX_LPBKD, xaui_loopback);
+ EFX_SET_DWORD_FIELD(reg, XX_LPBKC, xaui_loopback);
+ EFX_SET_DWORD_FIELD(reg, XX_LPBKB, xaui_loopback);
+ EFX_SET_DWORD_FIELD(reg, XX_LPBKA, xaui_loopback);
+ falcon_xmac_writel(efx, ®, XX_SD_CTL_REG_MAC);
+}
+
+
/* Try and bring the Falcon side of the Falcon-Phy XAUI link fails
* to come back up. Bash it until it comes back up */
static int falcon_check_xaui_link_up(struct efx_nic *efx)
@@ -382,7 +444,8 @@
tries = EFX_WORKAROUND_5147(efx) ? 5 : 1;
max_tries = tries;
- if (efx->phy_type == PHY_TYPE_NONE)
+ if ((efx->loopback_mode == LOOPBACK_NETWORK) ||
+ (efx->phy_type == PHY_TYPE_NONE))
return 0;
while (tries) {
@@ -391,12 +454,12 @@
EFX_LOG(efx, "%s Clobbering XAUI (%d tries left).\n",
__func__, tries);
- (void) falcon_reset_xaui(efx);
+ falcon_reset_xaui(efx);
udelay(200);
tries--;
}
- EFX_ERR(efx, "Failed to bring XAUI link back up in %d tries!\n",
+ EFX_LOG(efx, "Failed to bring XAUI link back up in %d tries!\n",
max_tries);
return 0;
}
@@ -408,8 +471,13 @@
falcon_mask_status_intr(efx, 0);
falcon_deconfigure_mac_wrapper(efx);
+
+ efx->tx_disabled = LOOPBACK_INTERNAL(efx);
efx->phy_op->reconfigure(efx);
+
+ falcon_reconfigure_xgxs_core(efx);
falcon_reconfigure_xmac_core(efx);
+
falcon_reconfigure_mac_wrapper(efx);
/* Ensure XAUI link is up */
@@ -491,18 +559,20 @@
(mac_stats->rx_bytes - mac_stats->rx_good_bytes);
}
-#define EFX_XAUI_RETRAIN_MAX 8
-
int falcon_check_xmac(struct efx_nic *efx)
{
unsigned xaui_link_ok;
int rc;
+ if ((efx->loopback_mode == LOOPBACK_NETWORK) ||
+ (efx->phy_type == PHY_TYPE_NONE))
+ return 0;
+
falcon_mask_status_intr(efx, 0);
xaui_link_ok = falcon_xaui_link_ok(efx);
if (EFX_WORKAROUND_5147(efx) && !xaui_link_ok)
- (void) falcon_reset_xaui(efx);
+ falcon_reset_xaui(efx);
/* Call the PHY check_hw routine */
rc = efx->phy_op->check_hw(efx);
@@ -569,7 +639,7 @@
reset = ((flow_control & EFX_FC_TX) &&
!(efx->flow_control & EFX_FC_TX));
if (EFX_WORKAROUND_11482(efx) && reset) {
- if (FALCON_REV(efx) >= FALCON_REV_B0) {
+ if (falcon_rev(efx) >= FALCON_REV_B0) {
/* Recover by resetting the EM block */
if (efx->link_up)
falcon_drain_tx_fifo(efx);
diff --git a/drivers/net/sfc/mdio_10g.c b/drivers/net/sfc/mdio_10g.c
index dc06bb0..c4f540e 100644
--- a/drivers/net/sfc/mdio_10g.c
+++ b/drivers/net/sfc/mdio_10g.c
@@ -44,6 +44,9 @@
int status;
int phy_id = efx->mii.phy_id;
+ if (LOOPBACK_INTERNAL(efx))
+ return 0;
+
/* Read MMD STATUS2 to check it is responding. */
status = mdio_clause45_read(efx, phy_id, mmd, MDIO_MMDREG_STAT2);
if (((status >> MDIO_MMDREG_STAT2_PRESENT_LBN) &
@@ -164,6 +167,22 @@
int mmd = 0;
int good;
+ /* If the port is in loopback, then we should only consider a subset
+ * of mmd's */
+ if (LOOPBACK_INTERNAL(efx))
+ return 1;
+ else if (efx->loopback_mode == LOOPBACK_NETWORK)
+ return 0;
+ else if (efx->loopback_mode == LOOPBACK_PHYXS)
+ mmd_mask &= ~(MDIO_MMDREG_DEVS0_PHYXS |
+ MDIO_MMDREG_DEVS0_PCS |
+ MDIO_MMDREG_DEVS0_PMAPMD);
+ else if (efx->loopback_mode == LOOPBACK_PCS)
+ mmd_mask &= ~(MDIO_MMDREG_DEVS0_PCS |
+ MDIO_MMDREG_DEVS0_PMAPMD);
+ else if (efx->loopback_mode == LOOPBACK_PMAPMD)
+ mmd_mask &= ~MDIO_MMDREG_DEVS0_PMAPMD;
+
while (mmd_mask) {
if (mmd_mask & 1) {
/* Double reads because link state is latched, and a
@@ -182,6 +201,65 @@
return ok;
}
+void mdio_clause45_transmit_disable(struct efx_nic *efx)
+{
+ int phy_id = efx->mii.phy_id;
+ int ctrl1, ctrl2;
+
+ ctrl1 = ctrl2 = mdio_clause45_read(efx, phy_id, MDIO_MMD_PMAPMD,
+ MDIO_MMDREG_TXDIS);
+ if (efx->tx_disabled)
+ ctrl2 |= (1 << MDIO_MMDREG_TXDIS_GLOBAL_LBN);
+ else
+ ctrl1 &= ~(1 << MDIO_MMDREG_TXDIS_GLOBAL_LBN);
+ if (ctrl1 != ctrl2)
+ mdio_clause45_write(efx, phy_id, MDIO_MMD_PMAPMD,
+ MDIO_MMDREG_TXDIS, ctrl2);
+}
+
+void mdio_clause45_phy_reconfigure(struct efx_nic *efx)
+{
+ int phy_id = efx->mii.phy_id;
+ int ctrl1, ctrl2;
+
+ /* Handle (with debouncing) PMA/PMD loopback */
+ ctrl1 = ctrl2 = mdio_clause45_read(efx, phy_id, MDIO_MMD_PMAPMD,
+ MDIO_MMDREG_CTRL1);
+
+ if (efx->loopback_mode == LOOPBACK_PMAPMD)
+ ctrl2 |= (1 << MDIO_PMAPMD_CTRL1_LBACK_LBN);
+ else
+ ctrl2 &= ~(1 << MDIO_PMAPMD_CTRL1_LBACK_LBN);
+
+ if (ctrl1 != ctrl2)
+ mdio_clause45_write(efx, phy_id, MDIO_MMD_PMAPMD,
+ MDIO_MMDREG_CTRL1, ctrl2);
+
+ /* Handle (with debouncing) PCS loopback */
+ ctrl1 = ctrl2 = mdio_clause45_read(efx, phy_id, MDIO_MMD_PCS,
+ MDIO_MMDREG_CTRL1);
+ if (efx->loopback_mode == LOOPBACK_PCS)
+ ctrl2 |= (1 << MDIO_MMDREG_CTRL1_LBACK_LBN);
+ else
+ ctrl2 &= ~(1 << MDIO_MMDREG_CTRL1_LBACK_LBN);
+
+ if (ctrl1 != ctrl2)
+ mdio_clause45_write(efx, phy_id, MDIO_MMD_PCS,
+ MDIO_MMDREG_CTRL1, ctrl2);
+
+ /* Handle (with debouncing) PHYXS network loopback */
+ ctrl1 = ctrl2 = mdio_clause45_read(efx, phy_id, MDIO_MMD_PHYXS,
+ MDIO_MMDREG_CTRL1);
+ if (efx->loopback_mode == LOOPBACK_NETWORK)
+ ctrl2 |= (1 << MDIO_MMDREG_CTRL1_LBACK_LBN);
+ else
+ ctrl2 &= ~(1 << MDIO_MMDREG_CTRL1_LBACK_LBN);
+
+ if (ctrl1 != ctrl2)
+ mdio_clause45_write(efx, phy_id, MDIO_MMD_PHYXS,
+ MDIO_MMDREG_CTRL1, ctrl2);
+}
+
/**
* mdio_clause45_get_settings - Read (some of) the PHY settings over MDIO.
* @efx: Efx NIC
diff --git a/drivers/net/sfc/mdio_10g.h b/drivers/net/sfc/mdio_10g.h
index 2214b6d..cb99f3f 100644
--- a/drivers/net/sfc/mdio_10g.h
+++ b/drivers/net/sfc/mdio_10g.h
@@ -44,11 +44,16 @@
#define MDIO_MMDREG_DEVS1 (6)
#define MDIO_MMDREG_CTRL2 (7)
#define MDIO_MMDREG_STAT2 (8)
+#define MDIO_MMDREG_TXDIS (9)
/* Bits in MMDREG_CTRL1 */
/* Reset */
#define MDIO_MMDREG_CTRL1_RESET_LBN (15)
#define MDIO_MMDREG_CTRL1_RESET_WIDTH (1)
+/* Loopback */
+/* Loopback bit for WIS, PCS, PHYSX and DTEXS */
+#define MDIO_MMDREG_CTRL1_LBACK_LBN (14)
+#define MDIO_MMDREG_CTRL1_LBACK_WIDTH (1)
/* Bits in MMDREG_STAT1 */
#define MDIO_MMDREG_STAT1_FAULT_LBN (7)
@@ -56,6 +61,9 @@
/* Link state */
#define MDIO_MMDREG_STAT1_LINK_LBN (2)
#define MDIO_MMDREG_STAT1_LINK_WIDTH (1)
+/* Low power ability */
+#define MDIO_MMDREG_STAT1_LPABLE_LBN (1)
+#define MDIO_MMDREG_STAT1_LPABLE_WIDTH (1)
/* Bits in ID reg */
#define MDIO_ID_REV(_id32) (_id32 & 0xf)
@@ -76,6 +84,14 @@
#define MDIO_MMDREG_STAT2_PRESENT_LBN (14)
#define MDIO_MMDREG_STAT2_PRESENT_WIDTH (2)
+/* Bits in MMDREG_TXDIS */
+#define MDIO_MMDREG_TXDIS_GLOBAL_LBN (0)
+#define MDIO_MMDREG_TXDIS_GLOBAL_WIDTH (1)
+
+/* MMD-specific bits, ordered by MMD, then register */
+#define MDIO_PMAPMD_CTRL1_LBACK_LBN (0)
+#define MDIO_PMAPMD_CTRL1_LBACK_WIDTH (1)
+
/* PMA type (4 bits) */
#define MDIO_PMAPMD_CTRL2_10G_CX4 (0x0)
#define MDIO_PMAPMD_CTRL2_10G_EW (0x1)
@@ -95,7 +111,7 @@
#define MDIO_PMAPMD_CTRL2_10_BT (0xf)
#define MDIO_PMAPMD_CTRL2_TYPE_MASK (0xf)
-/* /\* PHY XGXS lane state *\/ */
+/* PHY XGXS lane state */
#define MDIO_PHYXS_LANE_STATE (0x18)
#define MDIO_PHYXS_LANE_ALIGNED_LBN (12)
@@ -217,6 +233,12 @@
extern int mdio_clause45_links_ok(struct efx_nic *efx,
unsigned int mmd_mask);
+/* Generic transmit disable support though PMAPMD */
+extern void mdio_clause45_transmit_disable(struct efx_nic *efx);
+
+/* Generic part of reconfigure: set/clear loopback bits */
+extern void mdio_clause45_phy_reconfigure(struct efx_nic *efx);
+
/* Read (some of) the PHY settings over MDIO */
extern void mdio_clause45_get_settings(struct efx_nic *efx,
struct ethtool_cmd *ecmd);
diff --git a/drivers/net/sfc/net_driver.h b/drivers/net/sfc/net_driver.h
index c505482..5e20e75 100644
--- a/drivers/net/sfc/net_driver.h
+++ b/drivers/net/sfc/net_driver.h
@@ -42,7 +42,7 @@
#ifndef EFX_DRIVER_NAME
#define EFX_DRIVER_NAME "sfc"
#endif
-#define EFX_DRIVER_VERSION "2.2.0136"
+#define EFX_DRIVER_VERSION "2.2"
#ifdef EFX_ENABLE_DEBUG
#define EFX_BUG_ON_PARANOID(x) BUG_ON(x)
@@ -52,28 +52,19 @@
#define EFX_WARN_ON_PARANOID(x) do {} while (0)
#endif
-#define NET_DEV_REGISTERED(efx) \
- ((efx)->net_dev->reg_state == NETREG_REGISTERED)
-
-/* Include net device name in log messages if it has been registered.
- * Use efx->name not efx->net_dev->name so that races with (un)registration
- * are harmless.
- */
-#define NET_DEV_NAME(efx) (NET_DEV_REGISTERED(efx) ? (efx)->name : "")
-
/* Un-rate-limited logging */
#define EFX_ERR(efx, fmt, args...) \
-dev_err(&((efx)->pci_dev->dev), "ERR: %s " fmt, NET_DEV_NAME(efx), ##args)
+dev_err(&((efx)->pci_dev->dev), "ERR: %s " fmt, efx_dev_name(efx), ##args)
#define EFX_INFO(efx, fmt, args...) \
-dev_info(&((efx)->pci_dev->dev), "INFO: %s " fmt, NET_DEV_NAME(efx), ##args)
+dev_info(&((efx)->pci_dev->dev), "INFO: %s " fmt, efx_dev_name(efx), ##args)
#ifdef EFX_ENABLE_DEBUG
#define EFX_LOG(efx, fmt, args...) \
-dev_info(&((efx)->pci_dev->dev), "DBG: %s " fmt, NET_DEV_NAME(efx), ##args)
+dev_info(&((efx)->pci_dev->dev), "DBG: %s " fmt, efx_dev_name(efx), ##args)
#else
#define EFX_LOG(efx, fmt, args...) \
-dev_dbg(&((efx)->pci_dev->dev), "DBG: %s " fmt, NET_DEV_NAME(efx), ##args)
+dev_dbg(&((efx)->pci_dev->dev), "DBG: %s " fmt, efx_dev_name(efx), ##args)
#endif
#define EFX_TRACE(efx, fmt, args...) do {} while (0)
@@ -90,11 +81,6 @@
#define EFX_LOG_RL(efx, fmt, args...) \
do {if (net_ratelimit()) EFX_LOG(efx, fmt, ##args); } while (0)
-/* Kernel headers may redefine inline anyway */
-#ifndef inline
-#define inline inline __attribute__ ((always_inline))
-#endif
-
/**************************************************************************
*
* Efx data structures
@@ -134,6 +120,8 @@
* Set only on the final fragment of a packet; %NULL for all other
* fragments. When this fragment completes, then we can free this
* skb.
+ * @tsoh: The associated TSO header structure, or %NULL if this
+ * buffer is not a TSO header.
* @dma_addr: DMA address of the fragment.
* @len: Length of this fragment.
* This field is zero when the queue slot is empty.
@@ -144,6 +132,7 @@
*/
struct efx_tx_buffer {
const struct sk_buff *skb;
+ struct efx_tso_header *tsoh;
dma_addr_t dma_addr;
unsigned short len;
unsigned char continuation;
@@ -187,6 +176,13 @@
* variable indicates that the queue is full. This is to
* avoid cache-line ping-pong between the xmit path and the
* completion path.
+ * @tso_headers_free: A list of TSO headers allocated for this TX queue
+ * that are not in use, and so available for new TSO sends. The list
+ * is protected by the TX queue lock.
+ * @tso_bursts: Number of times TSO xmit invoked by kernel
+ * @tso_long_headers: Number of packets with headers too long for standard
+ * blocks
+ * @tso_packets: Number of packets via the TSO xmit path
*/
struct efx_tx_queue {
/* Members which don't change on the fast path */
@@ -206,6 +202,10 @@
unsigned int insert_count ____cacheline_aligned_in_smp;
unsigned int write_count;
unsigned int old_read_count;
+ struct efx_tso_header *tso_headers_free;
+ unsigned int tso_bursts;
+ unsigned int tso_long_headers;
+ unsigned int tso_packets;
};
/**
@@ -434,6 +434,9 @@
struct efx_blinker blinker;
};
+#define STRING_TABLE_LOOKUP(val, member) \
+ member ## _names[val]
+
enum efx_int_mode {
/* Be careful if altering to correct macro below */
EFX_INT_MODE_MSIX = 0,
@@ -506,6 +509,7 @@
* @check_hw: Check hardware
* @reset_xaui: Reset XAUI side of PHY for (software sequenced reset)
* @mmds: MMD presence mask
+ * @loopbacks: Supported loopback modes mask
*/
struct efx_phy_operations {
int (*init) (struct efx_nic *efx);
@@ -515,6 +519,7 @@
int (*check_hw) (struct efx_nic *efx);
void (*reset_xaui) (struct efx_nic *efx);
int mmds;
+ unsigned loopbacks;
};
/*
@@ -653,7 +658,6 @@
* @phy_op: PHY interface
* @phy_data: PHY private data (including PHY-specific stats)
* @mii: PHY interface
- * @phy_powered: PHY power state
* @tx_disabled: PHY transmitter turned off
* @link_up: Link status
* @link_options: Link options (MII/GMII format)
@@ -662,6 +666,9 @@
* @multicast_hash: Multicast hash table
* @flow_control: Flow control flags - separate RX/TX so can't use link_options
* @reconfigure_work: work item for dealing with PHY events
+ * @loopback_mode: Loopback status
+ * @loopback_modes: Supported loopback mode bitmask
+ * @loopback_selftest: Offline self-test private state
*
* The @priv field of the corresponding &struct net_device points to
* this.
@@ -674,7 +681,7 @@
struct workqueue_struct *workqueue;
struct work_struct reset_work;
struct delayed_work monitor_work;
- unsigned long membase_phys;
+ resource_size_t membase_phys;
void __iomem *membase;
spinlock_t biu_lock;
enum efx_int_mode interrupt_mode;
@@ -698,7 +705,7 @@
unsigned n_rx_nodesc_drop_cnt;
- void *nic_data;
+ struct falcon_nic_data *nic_data;
struct mutex mac_lock;
int port_enabled;
@@ -721,6 +728,7 @@
struct efx_phy_operations *phy_op;
void *phy_data;
struct mii_if_info mii;
+ unsigned tx_disabled;
int link_up;
unsigned int link_options;
@@ -732,8 +740,26 @@
struct work_struct reconfigure_work;
atomic_t rx_reset;
+ enum efx_loopback_mode loopback_mode;
+ unsigned int loopback_modes;
+
+ void *loopback_selftest;
};
+static inline int efx_dev_registered(struct efx_nic *efx)
+{
+ return efx->net_dev->reg_state == NETREG_REGISTERED;
+}
+
+/* Net device name, for inclusion in log messages if it has been registered.
+ * Use efx->name not efx->net_dev->name so that races with (un)registration
+ * are harmless.
+ */
+static inline const char *efx_dev_name(struct efx_nic *efx)
+{
+ return efx_dev_registered(efx) ? efx->name : "";
+}
+
/**
* struct efx_nic_type - Efx device type definition
* @mem_bar: Memory BAR number
@@ -769,7 +795,7 @@
unsigned int txd_ring_mask;
unsigned int rxd_ring_mask;
unsigned int evq_size;
- dma_addr_t max_dma_mask;
+ u64 max_dma_mask;
unsigned int tx_dma_mask;
unsigned bug5391_mask;
diff --git a/drivers/net/sfc/rx.c b/drivers/net/sfc/rx.c
index 551299b..601b001 100644
--- a/drivers/net/sfc/rx.c
+++ b/drivers/net/sfc/rx.c
@@ -19,6 +19,7 @@
#include "rx.h"
#include "efx.h"
#include "falcon.h"
+#include "selftest.h"
#include "workarounds.h"
/* Number of RX descriptors pushed at once. */
@@ -85,14 +86,17 @@
*/
#define EFX_RXD_HEAD_ROOM 2
-/* Macros for zero-order pages (potentially) containing multiple RX buffers */
-#define RX_DATA_OFFSET(_data) \
- (((unsigned long) (_data)) & (PAGE_SIZE-1))
-#define RX_BUF_OFFSET(_rx_buf) \
- RX_DATA_OFFSET((_rx_buf)->data)
-
-#define RX_PAGE_SIZE(_efx) \
- (PAGE_SIZE * (1u << (_efx)->rx_buffer_order))
+static inline unsigned int efx_rx_buf_offset(struct efx_rx_buffer *buf)
+{
+ /* Offset is always within one page, so we don't need to consider
+ * the page order.
+ */
+ return (__force unsigned long) buf->data & (PAGE_SIZE - 1);
+}
+static inline unsigned int efx_rx_buf_size(struct efx_nic *efx)
+{
+ return PAGE_SIZE << efx->rx_buffer_order;
+}
/**************************************************************************
@@ -105,7 +109,7 @@
static int efx_lro_get_skb_hdr(struct sk_buff *skb, void **ip_hdr,
void **tcpudp_hdr, u64 *hdr_flags, void *priv)
{
- struct efx_channel *channel = (struct efx_channel *)priv;
+ struct efx_channel *channel = priv;
struct iphdr *iph;
struct tcphdr *th;
@@ -130,12 +134,12 @@
void **ip_hdr, void **tcpudp_hdr, u64 *hdr_flags,
void *priv)
{
- struct efx_channel *channel = (struct efx_channel *)priv;
+ struct efx_channel *channel = priv;
struct ethhdr *eh;
struct iphdr *iph;
/* We support EtherII and VLAN encapsulated IPv4 */
- eh = (struct ethhdr *)(page_address(frag->page) + frag->page_offset);
+ eh = page_address(frag->page) + frag->page_offset;
*mac_hdr = eh;
if (eh->h_proto == htons(ETH_P_IP)) {
@@ -268,7 +272,7 @@
return -ENOMEM;
dma_addr = pci_map_page(efx->pci_dev, rx_buf->page,
- 0, RX_PAGE_SIZE(efx),
+ 0, efx_rx_buf_size(efx),
PCI_DMA_FROMDEVICE);
if (unlikely(pci_dma_mapping_error(dma_addr))) {
@@ -279,14 +283,14 @@
rx_queue->buf_page = rx_buf->page;
rx_queue->buf_dma_addr = dma_addr;
- rx_queue->buf_data = ((char *) page_address(rx_buf->page) +
+ rx_queue->buf_data = (page_address(rx_buf->page) +
EFX_PAGE_IP_ALIGN);
}
- offset = RX_DATA_OFFSET(rx_queue->buf_data);
rx_buf->len = bytes;
- rx_buf->dma_addr = rx_queue->buf_dma_addr + offset;
rx_buf->data = rx_queue->buf_data;
+ offset = efx_rx_buf_offset(rx_buf);
+ rx_buf->dma_addr = rx_queue->buf_dma_addr + offset;
/* Try to pack multiple buffers per page */
if (efx->rx_buffer_order == 0) {
@@ -294,7 +298,7 @@
rx_queue->buf_data += ((bytes + 0x1ff) & ~0x1ff);
offset += ((bytes + 0x1ff) & ~0x1ff);
- space = RX_PAGE_SIZE(efx) - offset;
+ space = efx_rx_buf_size(efx) - offset;
if (space >= bytes) {
/* Refs dropped on kernel releasing each skb */
get_page(rx_queue->buf_page);
@@ -343,7 +347,8 @@
EFX_BUG_ON_PARANOID(rx_buf->skb);
if (rx_buf->unmap_addr) {
pci_unmap_page(efx->pci_dev, rx_buf->unmap_addr,
- RX_PAGE_SIZE(efx), PCI_DMA_FROMDEVICE);
+ efx_rx_buf_size(efx),
+ PCI_DMA_FROMDEVICE);
rx_buf->unmap_addr = 0;
}
} else if (likely(rx_buf->skb)) {
@@ -399,9 +404,10 @@
return 0;
/* Record minimum fill level */
- if (unlikely(fill_level < rx_queue->min_fill))
+ if (unlikely(fill_level < rx_queue->min_fill)) {
if (fill_level)
rx_queue->min_fill = fill_level;
+ }
/* Acquire RX add lock. If this lock is contended, then a fast
* fill must already be in progress (e.g. in the refill
@@ -551,7 +557,7 @@
struct skb_frag_struct frags;
frags.page = rx_buf->page;
- frags.page_offset = RX_BUF_OFFSET(rx_buf);
+ frags.page_offset = efx_rx_buf_offset(rx_buf);
frags.size = rx_buf->len;
lro_receive_frags(lro_mgr, &frags, rx_buf->len,
@@ -596,7 +602,7 @@
if (unlikely(rx_buf->len > hdr_len)) {
struct skb_frag_struct *frag = skb_shinfo(skb)->frags;
frag->page = rx_buf->page;
- frag->page_offset = RX_BUF_OFFSET(rx_buf) + hdr_len;
+ frag->page_offset = efx_rx_buf_offset(rx_buf) + hdr_len;
frag->size = skb->len - hdr_len;
skb_shinfo(skb)->nr_frags = 1;
skb->data_len = frag->size;
@@ -683,6 +689,15 @@
struct sk_buff *skb;
int lro = efx->net_dev->features & NETIF_F_LRO;
+ /* If we're in loopback test, then pass the packet directly to the
+ * loopback layer, and free the rx_buf here
+ */
+ if (unlikely(efx->loopback_selftest)) {
+ efx_loopback_rx_packet(efx, rx_buf->data, rx_buf->len);
+ efx_free_rx_buffer(efx, rx_buf);
+ goto done;
+ }
+
if (rx_buf->skb) {
prefetch(skb_shinfo(rx_buf->skb));
@@ -736,7 +751,6 @@
/* Update allocation strategy method */
channel->rx_alloc_level += RX_ALLOC_FACTOR_SKB;
- /* fall-thru */
done:
efx->net_dev->last_rx = jiffies;
}
@@ -842,7 +856,8 @@
/* For a page that is part-way through splitting into RX buffers */
if (rx_queue->buf_page != NULL) {
pci_unmap_page(rx_queue->efx->pci_dev, rx_queue->buf_dma_addr,
- RX_PAGE_SIZE(rx_queue->efx), PCI_DMA_FROMDEVICE);
+ efx_rx_buf_size(rx_queue->efx),
+ PCI_DMA_FROMDEVICE);
__free_pages(rx_queue->buf_page,
rx_queue->efx->rx_buffer_order);
rx_queue->buf_page = NULL;
diff --git a/drivers/net/sfc/selftest.c b/drivers/net/sfc/selftest.c
new file mode 100644
index 0000000..3b2de9f
--- /dev/null
+++ b/drivers/net/sfc/selftest.c
@@ -0,0 +1,719 @@
+/****************************************************************************
+ * Driver for Solarflare Solarstorm network controllers and boards
+ * Copyright 2005-2006 Fen Systems Ltd.
+ * Copyright 2006-2008 Solarflare Communications Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation, incorporated herein by reference.
+ */
+
+#include <linux/netdevice.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/kernel_stat.h>
+#include <linux/pci.h>
+#include <linux/ethtool.h>
+#include <linux/ip.h>
+#include <linux/in.h>
+#include <linux/udp.h>
+#include <linux/rtnetlink.h>
+#include <asm/io.h>
+#include "net_driver.h"
+#include "ethtool.h"
+#include "efx.h"
+#include "falcon.h"
+#include "selftest.h"
+#include "boards.h"
+#include "workarounds.h"
+#include "mac.h"
+
+/*
+ * Loopback test packet structure
+ *
+ * The self-test should stress every RSS vector, and unfortunately
+ * Falcon only performs RSS on TCP/UDP packets.
+ */
+struct efx_loopback_payload {
+ struct ethhdr header;
+ struct iphdr ip;
+ struct udphdr udp;
+ __be16 iteration;
+ const char msg[64];
+} __attribute__ ((packed));
+
+/* Loopback test source MAC address */
+static const unsigned char payload_source[ETH_ALEN] = {
+ 0x00, 0x0f, 0x53, 0x1b, 0x1b, 0x1b,
+};
+
+static const char *payload_msg =
+ "Hello world! This is an Efx loopback test in progress!";
+
+/**
+ * efx_selftest_state - persistent state during a selftest
+ * @flush: Drop all packets in efx_loopback_rx_packet
+ * @packet_count: Number of packets being used in this test
+ * @skbs: An array of skbs transmitted
+ * @rx_good: RX good packet count
+ * @rx_bad: RX bad packet count
+ * @payload: Payload used in tests
+ */
+struct efx_selftest_state {
+ int flush;
+ int packet_count;
+ struct sk_buff **skbs;
+ atomic_t rx_good;
+ atomic_t rx_bad;
+ struct efx_loopback_payload payload;
+};
+
+/**************************************************************************
+ *
+ * Configurable values
+ *
+ **************************************************************************/
+
+/* Level of loopback testing
+ *
+ * The maximum packet burst length is 16**(n-1), i.e.
+ *
+ * - Level 0 : no packets
+ * - Level 1 : 1 packet
+ * - Level 2 : 17 packets (1 * 1 packet, 1 * 16 packets)
+ * - Level 3 : 273 packets (1 * 1 packet, 1 * 16 packet, 1 * 256 packets)
+ *
+ */
+static unsigned int loopback_test_level = 3;
+
+/**************************************************************************
+ *
+ * Interrupt and event queue testing
+ *
+ **************************************************************************/
+
+/* Test generation and receipt of interrupts */
+static int efx_test_interrupts(struct efx_nic *efx,
+ struct efx_self_tests *tests)
+{
+ struct efx_channel *channel;
+
+ EFX_LOG(efx, "testing interrupts\n");
+ tests->interrupt = -1;
+
+ /* Reset interrupt flag */
+ efx->last_irq_cpu = -1;
+ smp_wmb();
+
+ /* ACK each interrupting event queue. Receiving an interrupt due to
+ * traffic before a test event is raised is considered a pass */
+ efx_for_each_channel_with_interrupt(channel, efx) {
+ if (channel->work_pending)
+ efx_process_channel_now(channel);
+ if (efx->last_irq_cpu >= 0)
+ goto success;
+ }
+
+ falcon_generate_interrupt(efx);
+
+ /* Wait for arrival of test interrupt. */
+ EFX_LOG(efx, "waiting for test interrupt\n");
+ schedule_timeout_uninterruptible(HZ / 10);
+ if (efx->last_irq_cpu >= 0)
+ goto success;
+
+ EFX_ERR(efx, "timed out waiting for interrupt\n");
+ return -ETIMEDOUT;
+
+ success:
+ EFX_LOG(efx, "test interrupt (mode %d) seen on CPU%d\n",
+ efx->interrupt_mode, efx->last_irq_cpu);
+ tests->interrupt = 1;
+ return 0;
+}
+
+/* Test generation and receipt of non-interrupting events */
+static int efx_test_eventq(struct efx_channel *channel,
+ struct efx_self_tests *tests)
+{
+ unsigned int magic;
+
+ /* Channel specific code, limited to 20 bits */
+ magic = (0x00010150 + channel->channel);
+ EFX_LOG(channel->efx, "channel %d testing event queue with code %x\n",
+ channel->channel, magic);
+
+ tests->eventq_dma[channel->channel] = -1;
+ tests->eventq_int[channel->channel] = 1; /* fake pass */
+ tests->eventq_poll[channel->channel] = 1; /* fake pass */
+
+ /* Reset flag and zero magic word */
+ channel->efx->last_irq_cpu = -1;
+ channel->eventq_magic = 0;
+ smp_wmb();
+
+ falcon_generate_test_event(channel, magic);
+ udelay(1);
+
+ efx_process_channel_now(channel);
+ if (channel->eventq_magic != magic) {
+ EFX_ERR(channel->efx, "channel %d failed to see test event\n",
+ channel->channel);
+ return -ETIMEDOUT;
+ } else {
+ tests->eventq_dma[channel->channel] = 1;
+ }
+
+ return 0;
+}
+
+/* Test generation and receipt of interrupting events */
+static int efx_test_eventq_irq(struct efx_channel *channel,
+ struct efx_self_tests *tests)
+{
+ unsigned int magic, count;
+
+ /* Channel specific code, limited to 20 bits */
+ magic = (0x00010150 + channel->channel);
+ EFX_LOG(channel->efx, "channel %d testing event queue with code %x\n",
+ channel->channel, magic);
+
+ tests->eventq_dma[channel->channel] = -1;
+ tests->eventq_int[channel->channel] = -1;
+ tests->eventq_poll[channel->channel] = -1;
+
+ /* Reset flag and zero magic word */
+ channel->efx->last_irq_cpu = -1;
+ channel->eventq_magic = 0;
+ smp_wmb();
+
+ falcon_generate_test_event(channel, magic);
+
+ /* Wait for arrival of interrupt */
+ count = 0;
+ do {
+ schedule_timeout_uninterruptible(HZ / 100);
+
+ if (channel->work_pending)
+ efx_process_channel_now(channel);
+
+ if (channel->eventq_magic == magic)
+ goto eventq_ok;
+ } while (++count < 2);
+
+ EFX_ERR(channel->efx, "channel %d timed out waiting for event queue\n",
+ channel->channel);
+
+ /* See if interrupt arrived */
+ if (channel->efx->last_irq_cpu >= 0) {
+ EFX_ERR(channel->efx, "channel %d saw interrupt on CPU%d "
+ "during event queue test\n", channel->channel,
+ raw_smp_processor_id());
+ tests->eventq_int[channel->channel] = 1;
+ }
+
+ /* Check to see if event was received even if interrupt wasn't */
+ efx_process_channel_now(channel);
+ if (channel->eventq_magic == magic) {
+ EFX_ERR(channel->efx, "channel %d event was generated, but "
+ "failed to trigger an interrupt\n", channel->channel);
+ tests->eventq_dma[channel->channel] = 1;
+ }
+
+ return -ETIMEDOUT;
+ eventq_ok:
+ EFX_LOG(channel->efx, "channel %d event queue passed\n",
+ channel->channel);
+ tests->eventq_dma[channel->channel] = 1;
+ tests->eventq_int[channel->channel] = 1;
+ tests->eventq_poll[channel->channel] = 1;
+ return 0;
+}
+
+/**************************************************************************
+ *
+ * PHY testing
+ *
+ **************************************************************************/
+
+/* Check PHY presence by reading the PHY ID registers */
+static int efx_test_phy(struct efx_nic *efx,
+ struct efx_self_tests *tests)
+{
+ u16 physid1, physid2;
+ struct mii_if_info *mii = &efx->mii;
+ struct net_device *net_dev = efx->net_dev;
+
+ if (efx->phy_type == PHY_TYPE_NONE)
+ return 0;
+
+ EFX_LOG(efx, "testing PHY presence\n");
+ tests->phy_ok = -1;
+
+ physid1 = mii->mdio_read(net_dev, mii->phy_id, MII_PHYSID1);
+ physid2 = mii->mdio_read(net_dev, mii->phy_id, MII_PHYSID2);
+
+ if ((physid1 != 0x0000) && (physid1 != 0xffff) &&
+ (physid2 != 0x0000) && (physid2 != 0xffff)) {
+ EFX_LOG(efx, "found MII PHY %d ID 0x%x:%x\n",
+ mii->phy_id, physid1, physid2);
+ tests->phy_ok = 1;
+ return 0;
+ }
+
+ EFX_ERR(efx, "no MII PHY present with ID %d\n", mii->phy_id);
+ return -ENODEV;
+}
+
+/**************************************************************************
+ *
+ * Loopback testing
+ * NB Only one loopback test can be executing concurrently.
+ *
+ **************************************************************************/
+
+/* Loopback test RX callback
+ * This is called for each received packet during loopback testing.
+ */
+void efx_loopback_rx_packet(struct efx_nic *efx,
+ const char *buf_ptr, int pkt_len)
+{
+ struct efx_selftest_state *state = efx->loopback_selftest;
+ struct efx_loopback_payload *received;
+ struct efx_loopback_payload *payload;
+
+ BUG_ON(!buf_ptr);
+
+ /* If we are just flushing, then drop the packet */
+ if ((state == NULL) || state->flush)
+ return;
+
+ payload = &state->payload;
+
+ received = (struct efx_loopback_payload *) buf_ptr;
+ received->ip.saddr = payload->ip.saddr;
+ received->ip.check = payload->ip.check;
+
+ /* Check that header exists */
+ if (pkt_len < sizeof(received->header)) {
+ EFX_ERR(efx, "saw runt RX packet (length %d) in %s loopback "
+ "test\n", pkt_len, LOOPBACK_MODE(efx));
+ goto err;
+ }
+
+ /* Check that the ethernet header exists */
+ if (memcmp(&received->header, &payload->header, ETH_HLEN) != 0) {
+ EFX_ERR(efx, "saw non-loopback RX packet in %s loopback test\n",
+ LOOPBACK_MODE(efx));
+ goto err;
+ }
+
+ /* Check packet length */
+ if (pkt_len != sizeof(*payload)) {
+ EFX_ERR(efx, "saw incorrect RX packet length %d (wanted %d) in "
+ "%s loopback test\n", pkt_len, (int)sizeof(*payload),
+ LOOPBACK_MODE(efx));
+ goto err;
+ }
+
+ /* Check that IP header matches */
+ if (memcmp(&received->ip, &payload->ip, sizeof(payload->ip)) != 0) {
+ EFX_ERR(efx, "saw corrupted IP header in %s loopback test\n",
+ LOOPBACK_MODE(efx));
+ goto err;
+ }
+
+ /* Check that msg and padding matches */
+ if (memcmp(&received->msg, &payload->msg, sizeof(received->msg)) != 0) {
+ EFX_ERR(efx, "saw corrupted RX packet in %s loopback test\n",
+ LOOPBACK_MODE(efx));
+ goto err;
+ }
+
+ /* Check that iteration matches */
+ if (received->iteration != payload->iteration) {
+ EFX_ERR(efx, "saw RX packet from iteration %d (wanted %d) in "
+ "%s loopback test\n", ntohs(received->iteration),
+ ntohs(payload->iteration), LOOPBACK_MODE(efx));
+ goto err;
+ }
+
+ /* Increase correct RX count */
+ EFX_TRACE(efx, "got loopback RX in %s loopback test\n",
+ LOOPBACK_MODE(efx));
+
+ atomic_inc(&state->rx_good);
+ return;
+
+ err:
+#ifdef EFX_ENABLE_DEBUG
+ if (atomic_read(&state->rx_bad) == 0) {
+ EFX_ERR(efx, "received packet:\n");
+ print_hex_dump(KERN_ERR, "", DUMP_PREFIX_OFFSET, 0x10, 1,
+ buf_ptr, pkt_len, 0);
+ EFX_ERR(efx, "expected packet:\n");
+ print_hex_dump(KERN_ERR, "", DUMP_PREFIX_OFFSET, 0x10, 1,
+ &state->payload, sizeof(state->payload), 0);
+ }
+#endif
+ atomic_inc(&state->rx_bad);
+}
+
+/* Initialise an efx_selftest_state for a new iteration */
+static void efx_iterate_state(struct efx_nic *efx)
+{
+ struct efx_selftest_state *state = efx->loopback_selftest;
+ struct net_device *net_dev = efx->net_dev;
+ struct efx_loopback_payload *payload = &state->payload;
+
+ /* Initialise the layerII header */
+ memcpy(&payload->header.h_dest, net_dev->dev_addr, ETH_ALEN);
+ memcpy(&payload->header.h_source, &payload_source, ETH_ALEN);
+ payload->header.h_proto = htons(ETH_P_IP);
+
+ /* saddr set later and used as incrementing count */
+ payload->ip.daddr = htonl(INADDR_LOOPBACK);
+ payload->ip.ihl = 5;
+ payload->ip.check = htons(0xdead);
+ payload->ip.tot_len = htons(sizeof(*payload) - sizeof(struct ethhdr));
+ payload->ip.version = IPVERSION;
+ payload->ip.protocol = IPPROTO_UDP;
+
+ /* Initialise udp header */
+ payload->udp.source = 0;
+ payload->udp.len = htons(sizeof(*payload) - sizeof(struct ethhdr) -
+ sizeof(struct iphdr));
+ payload->udp.check = 0; /* checksum ignored */
+
+ /* Fill out payload */
+ payload->iteration = htons(ntohs(payload->iteration) + 1);
+ memcpy(&payload->msg, payload_msg, sizeof(payload_msg));
+
+ /* Fill out remaining state members */
+ atomic_set(&state->rx_good, 0);
+ atomic_set(&state->rx_bad, 0);
+ smp_wmb();
+}
+
+static int efx_tx_loopback(struct efx_tx_queue *tx_queue)
+{
+ struct efx_nic *efx = tx_queue->efx;
+ struct efx_selftest_state *state = efx->loopback_selftest;
+ struct efx_loopback_payload *payload;
+ struct sk_buff *skb;
+ int i, rc;
+
+ /* Transmit N copies of buffer */
+ for (i = 0; i < state->packet_count; i++) {
+ /* Allocate an skb, holding an extra reference for
+ * transmit completion counting */
+ skb = alloc_skb(sizeof(state->payload), GFP_KERNEL);
+ if (!skb)
+ return -ENOMEM;
+ state->skbs[i] = skb;
+ skb_get(skb);
+
+ /* Copy the payload in, incrementing the source address to
+ * exercise the rss vectors */
+ payload = ((struct efx_loopback_payload *)
+ skb_put(skb, sizeof(state->payload)));
+ memcpy(payload, &state->payload, sizeof(state->payload));
+ payload->ip.saddr = htonl(INADDR_LOOPBACK | (i << 2));
+
+ /* Ensure everything we've written is visible to the
+ * interrupt handler. */
+ smp_wmb();
+
+ if (efx_dev_registered(efx))
+ netif_tx_lock_bh(efx->net_dev);
+ rc = efx_xmit(efx, tx_queue, skb);
+ if (efx_dev_registered(efx))
+ netif_tx_unlock_bh(efx->net_dev);
+
+ if (rc != NETDEV_TX_OK) {
+ EFX_ERR(efx, "TX queue %d could not transmit packet %d "
+ "of %d in %s loopback test\n", tx_queue->queue,
+ i + 1, state->packet_count, LOOPBACK_MODE(efx));
+
+ /* Defer cleaning up the other skbs for the caller */
+ kfree_skb(skb);
+ return -EPIPE;
+ }
+ }
+
+ return 0;
+}
+
+static int efx_rx_loopback(struct efx_tx_queue *tx_queue,
+ struct efx_loopback_self_tests *lb_tests)
+{
+ struct efx_nic *efx = tx_queue->efx;
+ struct efx_selftest_state *state = efx->loopback_selftest;
+ struct sk_buff *skb;
+ int tx_done = 0, rx_good, rx_bad;
+ int i, rc = 0;
+
+ if (efx_dev_registered(efx))
+ netif_tx_lock_bh(efx->net_dev);
+
+ /* Count the number of tx completions, and decrement the refcnt. Any
+ * skbs not already completed will be free'd when the queue is flushed */
+ for (i=0; i < state->packet_count; i++) {
+ skb = state->skbs[i];
+ if (skb && !skb_shared(skb))
+ ++tx_done;
+ dev_kfree_skb_any(skb);
+ }
+
+ if (efx_dev_registered(efx))
+ netif_tx_unlock_bh(efx->net_dev);
+
+ /* Check TX completion and received packet counts */
+ rx_good = atomic_read(&state->rx_good);
+ rx_bad = atomic_read(&state->rx_bad);
+ if (tx_done != state->packet_count) {
+ /* Don't free the skbs; they will be picked up on TX
+ * overflow or channel teardown.
+ */
+ EFX_ERR(efx, "TX queue %d saw only %d out of an expected %d "
+ "TX completion events in %s loopback test\n",
+ tx_queue->queue, tx_done, state->packet_count,
+ LOOPBACK_MODE(efx));
+ rc = -ETIMEDOUT;
+ /* Allow to fall through so we see the RX errors as well */
+ }
+
+ /* We may always be up to a flush away from our desired packet total */
+ if (rx_good != state->packet_count) {
+ EFX_LOG(efx, "TX queue %d saw only %d out of an expected %d "
+ "received packets in %s loopback test\n",
+ tx_queue->queue, rx_good, state->packet_count,
+ LOOPBACK_MODE(efx));
+ rc = -ETIMEDOUT;
+ /* Fall through */
+ }
+
+ /* Update loopback test structure */
+ lb_tests->tx_sent[tx_queue->queue] += state->packet_count;
+ lb_tests->tx_done[tx_queue->queue] += tx_done;
+ lb_tests->rx_good += rx_good;
+ lb_tests->rx_bad += rx_bad;
+
+ return rc;
+}
+
+static int
+efx_test_loopback(struct efx_tx_queue *tx_queue,
+ struct efx_loopback_self_tests *lb_tests)
+{
+ struct efx_nic *efx = tx_queue->efx;
+ struct efx_selftest_state *state = efx->loopback_selftest;
+ struct efx_channel *channel;
+ int i, rc = 0;
+
+ for (i = 0; i < loopback_test_level; i++) {
+ /* Determine how many packets to send */
+ state->packet_count = (efx->type->txd_ring_mask + 1) / 3;
+ state->packet_count = min(1 << (i << 2), state->packet_count);
+ state->skbs = kzalloc(sizeof(state->skbs[0]) *
+ state->packet_count, GFP_KERNEL);
+ if (!state->skbs)
+ return -ENOMEM;
+ state->flush = 0;
+
+ EFX_LOG(efx, "TX queue %d testing %s loopback with %d "
+ "packets\n", tx_queue->queue, LOOPBACK_MODE(efx),
+ state->packet_count);
+
+ efx_iterate_state(efx);
+ rc = efx_tx_loopback(tx_queue);
+
+ /* NAPI polling is not enabled, so process channels synchronously */
+ schedule_timeout_uninterruptible(HZ / 50);
+ efx_for_each_channel_with_interrupt(channel, efx) {
+ if (channel->work_pending)
+ efx_process_channel_now(channel);
+ }
+
+ rc |= efx_rx_loopback(tx_queue, lb_tests);
+ kfree(state->skbs);
+
+ if (rc) {
+ /* Wait a while to ensure there are no packets
+ * floating around after a failure. */
+ schedule_timeout_uninterruptible(HZ / 10);
+ return rc;
+ }
+ }
+
+ EFX_LOG(efx, "TX queue %d passed %s loopback test with a burst length "
+ "of %d packets\n", tx_queue->queue, LOOPBACK_MODE(efx),
+ state->packet_count);
+
+ return rc;
+}
+
+static int efx_test_loopbacks(struct efx_nic *efx,
+ struct efx_self_tests *tests,
+ unsigned int loopback_modes)
+{
+ struct efx_selftest_state *state = efx->loopback_selftest;
+ struct ethtool_cmd ecmd, ecmd_loopback;
+ struct efx_tx_queue *tx_queue;
+ enum efx_loopback_mode old_mode, mode;
+ int count, rc = 0, link_up;
+
+ rc = efx_ethtool_get_settings(efx->net_dev, &ecmd);
+ if (rc) {
+ EFX_ERR(efx, "could not get GMII settings\n");
+ return rc;
+ }
+ old_mode = efx->loopback_mode;
+
+ /* Disable autonegotiation for the purposes of loopback */
+ memcpy(&ecmd_loopback, &ecmd, sizeof(ecmd_loopback));
+ if (ecmd_loopback.autoneg == AUTONEG_ENABLE) {
+ ecmd_loopback.autoneg = AUTONEG_DISABLE;
+ ecmd_loopback.duplex = DUPLEX_FULL;
+ ecmd_loopback.speed = SPEED_10000;
+ }
+
+ rc = efx_ethtool_set_settings(efx->net_dev, &ecmd_loopback);
+ if (rc) {
+ EFX_ERR(efx, "could not disable autonegotiation\n");
+ goto out;
+ }
+ tests->loopback_speed = ecmd_loopback.speed;
+ tests->loopback_full_duplex = ecmd_loopback.duplex;
+
+ /* Test all supported loopback modes */
+ for (mode = LOOPBACK_NONE; mode < LOOPBACK_TEST_MAX; mode++) {
+ if (!(loopback_modes & (1 << mode)))
+ continue;
+
+ /* Move the port into the specified loopback mode. */
+ state->flush = 1;
+ efx->loopback_mode = mode;
+ efx_reconfigure_port(efx);
+
+ /* Wait for the PHY to signal the link is up */
+ count = 0;
+ do {
+ struct efx_channel *channel = &efx->channel[0];
+
+ falcon_check_xmac(efx);
+ schedule_timeout_uninterruptible(HZ / 10);
+ if (channel->work_pending)
+ efx_process_channel_now(channel);
+ /* Wait for PHY events to be processed */
+ flush_workqueue(efx->workqueue);
+ rmb();
+
+ /* efx->link_up can be 1 even if the XAUI link is down,
+ * (bug5762). Usually, it's not worth bothering with the
+ * difference, but for selftests, we need that extra
+ * guarantee that the link is really, really, up.
+ */
+ link_up = efx->link_up;
+ if (!falcon_xaui_link_ok(efx))
+ link_up = 0;
+
+ } while ((++count < 20) && !link_up);
+
+ /* The link should now be up. If it isn't, there is no point
+ * in attempting a loopback test */
+ if (!link_up) {
+ EFX_ERR(efx, "loopback %s never came up\n",
+ LOOPBACK_MODE(efx));
+ rc = -EIO;
+ goto out;
+ }
+
+ EFX_LOG(efx, "link came up in %s loopback in %d iterations\n",
+ LOOPBACK_MODE(efx), count);
+
+ /* Test every TX queue */
+ efx_for_each_tx_queue(tx_queue, efx) {
+ rc |= efx_test_loopback(tx_queue,
+ &tests->loopback[mode]);
+ if (rc)
+ goto out;
+ }
+ }
+
+ out:
+ /* Take out of loopback and restore PHY settings */
+ state->flush = 1;
+ efx->loopback_mode = old_mode;
+ efx_ethtool_set_settings(efx->net_dev, &ecmd);
+
+ return rc;
+}
+
+/**************************************************************************
+ *
+ * Entry points
+ *
+ *************************************************************************/
+
+/* Online (i.e. non-disruptive) testing
+ * This checks interrupt generation, event delivery and PHY presence. */
+int efx_online_test(struct efx_nic *efx, struct efx_self_tests *tests)
+{
+ struct efx_channel *channel;
+ int rc = 0;
+
+ EFX_LOG(efx, "performing online self-tests\n");
+
+ rc |= efx_test_interrupts(efx, tests);
+ efx_for_each_channel(channel, efx) {
+ if (channel->has_interrupt)
+ rc |= efx_test_eventq_irq(channel, tests);
+ else
+ rc |= efx_test_eventq(channel, tests);
+ }
+ rc |= efx_test_phy(efx, tests);
+
+ if (rc)
+ EFX_ERR(efx, "failed online self-tests\n");
+
+ return rc;
+}
+
+/* Offline (i.e. disruptive) testing
+ * This checks MAC and PHY loopback on the specified port. */
+int efx_offline_test(struct efx_nic *efx,
+ struct efx_self_tests *tests, unsigned int loopback_modes)
+{
+ struct efx_selftest_state *state;
+ int rc = 0;
+
+ EFX_LOG(efx, "performing offline self-tests\n");
+
+ /* Create a selftest_state structure to hold state for the test */
+ state = kzalloc(sizeof(*state), GFP_KERNEL);
+ if (state == NULL) {
+ rc = -ENOMEM;
+ goto out;
+ }
+
+ /* Set the port loopback_selftest member. From this point on
+ * all received packets will be dropped. Mark the state as
+ * "flushing" so all inflight packets are dropped */
+ BUG_ON(efx->loopback_selftest);
+ state->flush = 1;
+ efx->loopback_selftest = state;
+
+ rc = efx_test_loopbacks(efx, tests, loopback_modes);
+
+ efx->loopback_selftest = NULL;
+ wmb();
+ kfree(state);
+
+ out:
+ if (rc)
+ EFX_ERR(efx, "failed offline self-tests\n");
+
+ return rc;
+}
+
diff --git a/drivers/net/sfc/selftest.h b/drivers/net/sfc/selftest.h
new file mode 100644
index 0000000..f6999c2
--- /dev/null
+++ b/drivers/net/sfc/selftest.h
@@ -0,0 +1,50 @@
+/****************************************************************************
+ * Driver for Solarflare Solarstorm network controllers and boards
+ * Copyright 2005-2006 Fen Systems Ltd.
+ * Copyright 2006-2008 Solarflare Communications Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation, incorporated herein by reference.
+ */
+
+#ifndef EFX_SELFTEST_H
+#define EFX_SELFTEST_H
+
+#include "net_driver.h"
+
+/*
+ * Self tests
+ */
+
+struct efx_loopback_self_tests {
+ int tx_sent[EFX_MAX_TX_QUEUES];
+ int tx_done[EFX_MAX_TX_QUEUES];
+ int rx_good;
+ int rx_bad;
+};
+
+/* Efx self test results
+ * For fields which are not counters, 1 indicates success and -1
+ * indicates failure.
+ */
+struct efx_self_tests {
+ int interrupt;
+ int eventq_dma[EFX_MAX_CHANNELS];
+ int eventq_int[EFX_MAX_CHANNELS];
+ int eventq_poll[EFX_MAX_CHANNELS];
+ int phy_ok;
+ int loopback_speed;
+ int loopback_full_duplex;
+ struct efx_loopback_self_tests loopback[LOOPBACK_TEST_MAX];
+};
+
+extern void efx_loopback_rx_packet(struct efx_nic *efx,
+ const char *buf_ptr, int pkt_len);
+extern int efx_online_test(struct efx_nic *efx,
+ struct efx_self_tests *tests);
+extern int efx_offline_test(struct efx_nic *efx,
+ struct efx_self_tests *tests,
+ unsigned int loopback_modes);
+
+#endif /* EFX_SELFTEST_H */
diff --git a/drivers/net/sfc/sfe4001.c b/drivers/net/sfc/sfe4001.c
index 11fa9fb..66a0d14 100644
--- a/drivers/net/sfc/sfe4001.c
+++ b/drivers/net/sfc/sfe4001.c
@@ -116,20 +116,29 @@
/* Turn off all power rails */
out = 0xff;
- (void) efx_i2c_write(i2c, PCA9539, P0_OUT, &out, 1);
+ efx_i2c_write(i2c, PCA9539, P0_OUT, &out, 1);
/* Disable port 1 outputs on IO expander */
cfg = 0xff;
- (void) efx_i2c_write(i2c, PCA9539, P1_CONFIG, &cfg, 1);
+ efx_i2c_write(i2c, PCA9539, P1_CONFIG, &cfg, 1);
/* Disable port 0 outputs on IO expander */
cfg = 0xff;
- (void) efx_i2c_write(i2c, PCA9539, P0_CONFIG, &cfg, 1);
+ efx_i2c_write(i2c, PCA9539, P0_CONFIG, &cfg, 1);
/* Clear any over-temperature alert */
- (void) efx_i2c_read(i2c, MAX6647, RSL, &in, 1);
+ efx_i2c_read(i2c, MAX6647, RSL, &in, 1);
}
+/* The P0_EN_3V3X line on SFE4001 boards (from A2 onward) is connected
+ * to the FLASH_CFG_1 input on the DSP. We must keep it high at power-
+ * up to allow writing the flash (done through MDIO from userland).
+ */
+unsigned int sfe4001_phy_flash_cfg;
+module_param_named(phy_flash_cfg, sfe4001_phy_flash_cfg, uint, 0444);
+MODULE_PARM_DESC(phy_flash_cfg,
+ "Force PHY to enter flash configuration mode");
+
/* This board uses an I2C expander to provider power to the PHY, which needs to
* be turned on before the PHY can be used.
* Context: Process context, rtnl lock held
@@ -203,6 +212,8 @@
out = 0xff & ~((1 << P0_EN_1V2_LBN) | (1 << P0_EN_2V5_LBN) |
(1 << P0_EN_3V3X_LBN) | (1 << P0_EN_5V_LBN) |
(1 << P0_X_TRST_LBN));
+ if (sfe4001_phy_flash_cfg)
+ out |= 1 << P0_EN_3V3X_LBN;
rc = efx_i2c_write(i2c, PCA9539, P0_OUT, &out, 1);
if (rc)
@@ -226,6 +237,9 @@
if (in & (1 << P1_AFE_PWD_LBN))
goto done;
+ /* DSP doesn't look powered in flash config mode */
+ if (sfe4001_phy_flash_cfg)
+ goto done;
} while (++count < 20);
EFX_INFO(efx, "timed out waiting for power\n");
@@ -239,14 +253,14 @@
fail3:
/* Turn off all power rails */
out = 0xff;
- (void) efx_i2c_write(i2c, PCA9539, P0_OUT, &out, 1);
+ efx_i2c_write(i2c, PCA9539, P0_OUT, &out, 1);
/* Disable port 1 outputs on IO expander */
out = 0xff;
- (void) efx_i2c_write(i2c, PCA9539, P1_CONFIG, &out, 1);
+ efx_i2c_write(i2c, PCA9539, P1_CONFIG, &out, 1);
fail2:
/* Disable port 0 outputs on IO expander */
out = 0xff;
- (void) efx_i2c_write(i2c, PCA9539, P0_CONFIG, &out, 1);
+ efx_i2c_write(i2c, PCA9539, P0_CONFIG, &out, 1);
fail1:
return rc;
}
diff --git a/drivers/net/sfc/tenxpress.c b/drivers/net/sfc/tenxpress.c
index a2e9f79..c014606 100644
--- a/drivers/net/sfc/tenxpress.c
+++ b/drivers/net/sfc/tenxpress.c
@@ -24,6 +24,11 @@
MDIO_MMDREG_DEVS0_PCS | \
MDIO_MMDREG_DEVS0_PHYXS)
+#define TENXPRESS_LOOPBACKS ((1 << LOOPBACK_PHYXS) | \
+ (1 << LOOPBACK_PCS) | \
+ (1 << LOOPBACK_PMAPMD) | \
+ (1 << LOOPBACK_NETWORK))
+
/* We complain if we fail to see the link partner as 10G capable this many
* times in a row (must be > 1 as sampling the autoneg. registers is racy)
*/
@@ -72,6 +77,10 @@
#define PMA_PMD_BIST_RXD_LBN (1)
#define PMA_PMD_BIST_AFE_LBN (0)
+/* Special Software reset register */
+#define PMA_PMD_EXT_CTRL_REG 49152
+#define PMA_PMD_EXT_SSR_LBN 15
+
#define BIST_MAX_DELAY (1000)
#define BIST_POLL_DELAY (10)
@@ -86,6 +95,11 @@
#define PCS_TEST_SELECT_REG 0xd807 /* PRM 10.5.8 */
#define CLK312_EN_LBN 3
+/* PHYXS registers */
+#define PHYXS_TEST1 (49162)
+#define LOOPBACK_NEAR_LBN (8)
+#define LOOPBACK_NEAR_WIDTH (1)
+
/* Boot status register */
#define PCS_BOOT_STATUS_REG (0xd000)
#define PCS_BOOT_FATAL_ERR_LBN (0)
@@ -106,7 +120,9 @@
struct tenxpress_phy_data {
enum tenxpress_state state;
+ enum efx_loopback_mode loopback_mode;
atomic_t bad_crc_count;
+ int tx_disabled;
int bad_lp_tries;
};
@@ -195,14 +211,18 @@
int rc = 0;
phy_data = kzalloc(sizeof(*phy_data), GFP_KERNEL);
+ if (!phy_data)
+ return -ENOMEM;
efx->phy_data = phy_data;
tenxpress_set_state(efx, TENXPRESS_STATUS_NORMAL);
- rc = mdio_clause45_wait_reset_mmds(efx,
- TENXPRESS_REQUIRED_DEVS);
- if (rc < 0)
- goto fail;
+ if (!sfe4001_phy_flash_cfg) {
+ rc = mdio_clause45_wait_reset_mmds(efx,
+ TENXPRESS_REQUIRED_DEVS);
+ if (rc < 0)
+ goto fail;
+ }
rc = mdio_clause45_check_mmds(efx, TENXPRESS_REQUIRED_DEVS, 0);
if (rc < 0)
@@ -225,6 +245,35 @@
return rc;
}
+static int tenxpress_special_reset(struct efx_nic *efx)
+{
+ int rc, reg;
+
+ EFX_TRACE(efx, "%s\n", __func__);
+
+ /* Initiate reset */
+ reg = mdio_clause45_read(efx, efx->mii.phy_id,
+ MDIO_MMD_PMAPMD, PMA_PMD_EXT_CTRL_REG);
+ reg |= (1 << PMA_PMD_EXT_SSR_LBN);
+ mdio_clause45_write(efx, efx->mii.phy_id, MDIO_MMD_PMAPMD,
+ PMA_PMD_EXT_CTRL_REG, reg);
+
+ msleep(200);
+
+ /* Wait for the blocks to come out of reset */
+ rc = mdio_clause45_wait_reset_mmds(efx,
+ TENXPRESS_REQUIRED_DEVS);
+ if (rc < 0)
+ return rc;
+
+ /* Try and reconfigure the device */
+ rc = tenxpress_init(efx);
+ if (rc < 0)
+ return rc;
+
+ return 0;
+}
+
static void tenxpress_set_bad_lp(struct efx_nic *efx, int bad_lp)
{
struct tenxpress_phy_data *pd = efx->phy_data;
@@ -299,11 +348,46 @@
return ok;
}
+static void tenxpress_phyxs_loopback(struct efx_nic *efx)
+{
+ int phy_id = efx->mii.phy_id;
+ int ctrl1, ctrl2;
+
+ ctrl1 = ctrl2 = mdio_clause45_read(efx, phy_id, MDIO_MMD_PHYXS,
+ PHYXS_TEST1);
+ if (efx->loopback_mode == LOOPBACK_PHYXS)
+ ctrl2 |= (1 << LOOPBACK_NEAR_LBN);
+ else
+ ctrl2 &= ~(1 << LOOPBACK_NEAR_LBN);
+ if (ctrl1 != ctrl2)
+ mdio_clause45_write(efx, phy_id, MDIO_MMD_PHYXS,
+ PHYXS_TEST1, ctrl2);
+}
+
static void tenxpress_phy_reconfigure(struct efx_nic *efx)
{
+ struct tenxpress_phy_data *phy_data = efx->phy_data;
+ int loop_change = LOOPBACK_OUT_OF(phy_data, efx,
+ TENXPRESS_LOOPBACKS);
+
if (!tenxpress_state_is(efx, TENXPRESS_STATUS_NORMAL))
return;
+ /* When coming out of transmit disable, coming out of low power
+ * mode, or moving out of any PHY internal loopback mode,
+ * perform a special software reset */
+ if ((phy_data->tx_disabled && !efx->tx_disabled) ||
+ loop_change) {
+ tenxpress_special_reset(efx);
+ falcon_reset_xaui(efx);
+ }
+
+ mdio_clause45_transmit_disable(efx);
+ mdio_clause45_phy_reconfigure(efx);
+ tenxpress_phyxs_loopback(efx);
+
+ phy_data->tx_disabled = efx->tx_disabled;
+ phy_data->loopback_mode = efx->loopback_mode;
efx->link_up = tenxpress_link_ok(efx, 0);
efx->link_options = GM_LPA_10000FULL;
}
@@ -431,4 +515,5 @@
.clear_interrupt = tenxpress_phy_clear_interrupt,
.reset_xaui = tenxpress_reset_xaui,
.mmds = TENXPRESS_REQUIRED_DEVS,
+ .loopbacks = TENXPRESS_LOOPBACKS,
};
diff --git a/drivers/net/sfc/tx.c b/drivers/net/sfc/tx.c
index fbb866b..5cdd082 100644
--- a/drivers/net/sfc/tx.c
+++ b/drivers/net/sfc/tx.c
@@ -82,6 +82,46 @@
}
}
+/**
+ * struct efx_tso_header - a DMA mapped buffer for packet headers
+ * @next: Linked list of free ones.
+ * The list is protected by the TX queue lock.
+ * @dma_unmap_len: Length to unmap for an oversize buffer, or 0.
+ * @dma_addr: The DMA address of the header below.
+ *
+ * This controls the memory used for a TSO header. Use TSOH_DATA()
+ * to find the packet header data. Use TSOH_SIZE() to calculate the
+ * total size required for a given packet header length. TSO headers
+ * in the free list are exactly %TSOH_STD_SIZE bytes in size.
+ */
+struct efx_tso_header {
+ union {
+ struct efx_tso_header *next;
+ size_t unmap_len;
+ };
+ dma_addr_t dma_addr;
+};
+
+static int efx_enqueue_skb_tso(struct efx_tx_queue *tx_queue,
+ const struct sk_buff *skb);
+static void efx_fini_tso(struct efx_tx_queue *tx_queue);
+static void efx_tsoh_heap_free(struct efx_tx_queue *tx_queue,
+ struct efx_tso_header *tsoh);
+
+static inline void efx_tsoh_free(struct efx_tx_queue *tx_queue,
+ struct efx_tx_buffer *buffer)
+{
+ if (buffer->tsoh) {
+ if (likely(!buffer->tsoh->unmap_len)) {
+ buffer->tsoh->next = tx_queue->tso_headers_free;
+ tx_queue->tso_headers_free = buffer->tsoh;
+ } else {
+ efx_tsoh_heap_free(tx_queue, buffer->tsoh);
+ }
+ buffer->tsoh = NULL;
+ }
+}
+
/*
* Add a socket buffer to a TX queue
@@ -114,6 +154,9 @@
EFX_BUG_ON_PARANOID(tx_queue->write_count != tx_queue->insert_count);
+ if (skb_shinfo((struct sk_buff *)skb)->gso_size)
+ return efx_enqueue_skb_tso(tx_queue, skb);
+
/* Get size of the initial fragment */
len = skb_headlen(skb);
@@ -166,6 +209,8 @@
insert_ptr = (tx_queue->insert_count &
efx->type->txd_ring_mask);
buffer = &tx_queue->buffer[insert_ptr];
+ efx_tsoh_free(tx_queue, buffer);
+ EFX_BUG_ON_PARANOID(buffer->tsoh);
EFX_BUG_ON_PARANOID(buffer->skb);
EFX_BUG_ON_PARANOID(buffer->len);
EFX_BUG_ON_PARANOID(buffer->continuation != 1);
@@ -342,7 +387,7 @@
if (unlikely(tx_queue->stopped)) {
fill_level = tx_queue->insert_count - tx_queue->read_count;
if (fill_level < EFX_NETDEV_TX_THRESHOLD(tx_queue)) {
- EFX_BUG_ON_PARANOID(!NET_DEV_REGISTERED(efx));
+ EFX_BUG_ON_PARANOID(!efx_dev_registered(efx));
/* Do this under netif_tx_lock(), to avoid racing
* with efx_xmit(). */
@@ -432,6 +477,9 @@
efx_release_tx_buffers(tx_queue);
+ /* Free up TSO header cache */
+ efx_fini_tso(tx_queue);
+
/* Release queue's stop on port, if any */
if (tx_queue->stopped) {
tx_queue->stopped = 0;
@@ -450,3 +498,622 @@
}
+/* Efx TCP segmentation acceleration.
+ *
+ * Why? Because by doing it here in the driver we can go significantly
+ * faster than the GSO.
+ *
+ * Requires TX checksum offload support.
+ */
+
+/* Number of bytes inserted at the start of a TSO header buffer,
+ * similar to NET_IP_ALIGN.
+ */
+#if defined(__i386__) || defined(__x86_64__)
+#define TSOH_OFFSET 0
+#else
+#define TSOH_OFFSET NET_IP_ALIGN
+#endif
+
+#define TSOH_BUFFER(tsoh) ((u8 *)(tsoh + 1) + TSOH_OFFSET)
+
+/* Total size of struct efx_tso_header, buffer and padding */
+#define TSOH_SIZE(hdr_len) \
+ (sizeof(struct efx_tso_header) + TSOH_OFFSET + hdr_len)
+
+/* Size of blocks on free list. Larger blocks must be allocated from
+ * the heap.
+ */
+#define TSOH_STD_SIZE 128
+
+#define PTR_DIFF(p1, p2) ((u8 *)(p1) - (u8 *)(p2))
+#define ETH_HDR_LEN(skb) (skb_network_header(skb) - (skb)->data)
+#define SKB_TCP_OFF(skb) PTR_DIFF(tcp_hdr(skb), (skb)->data)
+#define SKB_IPV4_OFF(skb) PTR_DIFF(ip_hdr(skb), (skb)->data)
+
+/**
+ * struct tso_state - TSO state for an SKB
+ * @remaining_len: Bytes of data we've yet to segment
+ * @seqnum: Current sequence number
+ * @packet_space: Remaining space in current packet
+ * @ifc: Input fragment cursor.
+ * Where we are in the current fragment of the incoming SKB. These
+ * values get updated in place when we split a fragment over
+ * multiple packets.
+ * @p: Parameters.
+ * These values are set once at the start of the TSO send and do
+ * not get changed as the routine progresses.
+ *
+ * The state used during segmentation. It is put into this data structure
+ * just to make it easy to pass into inline functions.
+ */
+struct tso_state {
+ unsigned remaining_len;
+ unsigned seqnum;
+ unsigned packet_space;
+
+ struct {
+ /* DMA address of current position */
+ dma_addr_t dma_addr;
+ /* Remaining length */
+ unsigned int len;
+ /* DMA address and length of the whole fragment */
+ unsigned int unmap_len;
+ dma_addr_t unmap_addr;
+ struct page *page;
+ unsigned page_off;
+ } ifc;
+
+ struct {
+ /* The number of bytes of header */
+ unsigned int header_length;
+
+ /* The number of bytes to put in each outgoing segment. */
+ int full_packet_size;
+
+ /* Current IPv4 ID, host endian. */
+ unsigned ipv4_id;
+ } p;
+};
+
+
+/*
+ * Verify that our various assumptions about sk_buffs and the conditions
+ * under which TSO will be attempted hold true.
+ */
+static inline void efx_tso_check_safe(const struct sk_buff *skb)
+{
+ EFX_BUG_ON_PARANOID(skb->protocol != htons(ETH_P_IP));
+ EFX_BUG_ON_PARANOID(((struct ethhdr *)skb->data)->h_proto !=
+ skb->protocol);
+ EFX_BUG_ON_PARANOID(ip_hdr(skb)->protocol != IPPROTO_TCP);
+ EFX_BUG_ON_PARANOID((PTR_DIFF(tcp_hdr(skb), skb->data)
+ + (tcp_hdr(skb)->doff << 2u)) >
+ skb_headlen(skb));
+}
+
+
+/*
+ * Allocate a page worth of efx_tso_header structures, and string them
+ * into the tx_queue->tso_headers_free linked list. Return 0 or -ENOMEM.
+ */
+static int efx_tsoh_block_alloc(struct efx_tx_queue *tx_queue)
+{
+
+ struct pci_dev *pci_dev = tx_queue->efx->pci_dev;
+ struct efx_tso_header *tsoh;
+ dma_addr_t dma_addr;
+ u8 *base_kva, *kva;
+
+ base_kva = pci_alloc_consistent(pci_dev, PAGE_SIZE, &dma_addr);
+ if (base_kva == NULL) {
+ EFX_ERR(tx_queue->efx, "Unable to allocate page for TSO"
+ " headers\n");
+ return -ENOMEM;
+ }
+
+ /* pci_alloc_consistent() allocates pages. */
+ EFX_BUG_ON_PARANOID(dma_addr & (PAGE_SIZE - 1u));
+
+ for (kva = base_kva; kva < base_kva + PAGE_SIZE; kva += TSOH_STD_SIZE) {
+ tsoh = (struct efx_tso_header *)kva;
+ tsoh->dma_addr = dma_addr + (TSOH_BUFFER(tsoh) - base_kva);
+ tsoh->next = tx_queue->tso_headers_free;
+ tx_queue->tso_headers_free = tsoh;
+ }
+
+ return 0;
+}
+
+
+/* Free up a TSO header, and all others in the same page. */
+static void efx_tsoh_block_free(struct efx_tx_queue *tx_queue,
+ struct efx_tso_header *tsoh,
+ struct pci_dev *pci_dev)
+{
+ struct efx_tso_header **p;
+ unsigned long base_kva;
+ dma_addr_t base_dma;
+
+ base_kva = (unsigned long)tsoh & PAGE_MASK;
+ base_dma = tsoh->dma_addr & PAGE_MASK;
+
+ p = &tx_queue->tso_headers_free;
+ while (*p != NULL) {
+ if (((unsigned long)*p & PAGE_MASK) == base_kva)
+ *p = (*p)->next;
+ else
+ p = &(*p)->next;
+ }
+
+ pci_free_consistent(pci_dev, PAGE_SIZE, (void *)base_kva, base_dma);
+}
+
+static struct efx_tso_header *
+efx_tsoh_heap_alloc(struct efx_tx_queue *tx_queue, size_t header_len)
+{
+ struct efx_tso_header *tsoh;
+
+ tsoh = kmalloc(TSOH_SIZE(header_len), GFP_ATOMIC | GFP_DMA);
+ if (unlikely(!tsoh))
+ return NULL;
+
+ tsoh->dma_addr = pci_map_single(tx_queue->efx->pci_dev,
+ TSOH_BUFFER(tsoh), header_len,
+ PCI_DMA_TODEVICE);
+ if (unlikely(pci_dma_mapping_error(tsoh->dma_addr))) {
+ kfree(tsoh);
+ return NULL;
+ }
+
+ tsoh->unmap_len = header_len;
+ return tsoh;
+}
+
+static void
+efx_tsoh_heap_free(struct efx_tx_queue *tx_queue, struct efx_tso_header *tsoh)
+{
+ pci_unmap_single(tx_queue->efx->pci_dev,
+ tsoh->dma_addr, tsoh->unmap_len,
+ PCI_DMA_TODEVICE);
+ kfree(tsoh);
+}
+
+/**
+ * efx_tx_queue_insert - push descriptors onto the TX queue
+ * @tx_queue: Efx TX queue
+ * @dma_addr: DMA address of fragment
+ * @len: Length of fragment
+ * @skb: Only non-null for end of last segment
+ * @end_of_packet: True if last fragment in a packet
+ * @unmap_addr: DMA address of fragment for unmapping
+ * @unmap_len: Only set this in last segment of a fragment
+ *
+ * Push descriptors onto the TX queue. Return 0 on success or 1 if
+ * @tx_queue full.
+ */
+static int efx_tx_queue_insert(struct efx_tx_queue *tx_queue,
+ dma_addr_t dma_addr, unsigned len,
+ const struct sk_buff *skb, int end_of_packet,
+ dma_addr_t unmap_addr, unsigned unmap_len)
+{
+ struct efx_tx_buffer *buffer;
+ struct efx_nic *efx = tx_queue->efx;
+ unsigned dma_len, fill_level, insert_ptr, misalign;
+ int q_space;
+
+ EFX_BUG_ON_PARANOID(len <= 0);
+
+ fill_level = tx_queue->insert_count - tx_queue->old_read_count;
+ /* -1 as there is no way to represent all descriptors used */
+ q_space = efx->type->txd_ring_mask - 1 - fill_level;
+
+ while (1) {
+ if (unlikely(q_space-- <= 0)) {
+ /* It might be that completions have happened
+ * since the xmit path last checked. Update
+ * the xmit path's copy of read_count.
+ */
+ ++tx_queue->stopped;
+ /* This memory barrier protects the change of
+ * stopped from the access of read_count. */
+ smp_mb();
+ tx_queue->old_read_count =
+ *(volatile unsigned *)&tx_queue->read_count;
+ fill_level = (tx_queue->insert_count
+ - tx_queue->old_read_count);
+ q_space = efx->type->txd_ring_mask - 1 - fill_level;
+ if (unlikely(q_space-- <= 0))
+ return 1;
+ smp_mb();
+ --tx_queue->stopped;
+ }
+
+ insert_ptr = tx_queue->insert_count & efx->type->txd_ring_mask;
+ buffer = &tx_queue->buffer[insert_ptr];
+ ++tx_queue->insert_count;
+
+ EFX_BUG_ON_PARANOID(tx_queue->insert_count -
+ tx_queue->read_count >
+ efx->type->txd_ring_mask);
+
+ efx_tsoh_free(tx_queue, buffer);
+ EFX_BUG_ON_PARANOID(buffer->len);
+ EFX_BUG_ON_PARANOID(buffer->unmap_len);
+ EFX_BUG_ON_PARANOID(buffer->skb);
+ EFX_BUG_ON_PARANOID(buffer->continuation != 1);
+ EFX_BUG_ON_PARANOID(buffer->tsoh);
+
+ buffer->dma_addr = dma_addr;
+
+ /* Ensure we do not cross a boundary unsupported by H/W */
+ dma_len = (~dma_addr & efx->type->tx_dma_mask) + 1;
+
+ misalign = (unsigned)dma_addr & efx->type->bug5391_mask;
+ if (misalign && dma_len + misalign > 512)
+ dma_len = 512 - misalign;
+
+ /* If there is enough space to send then do so */
+ if (dma_len >= len)
+ break;
+
+ buffer->len = dma_len; /* Don't set the other members */
+ dma_addr += dma_len;
+ len -= dma_len;
+ }
+
+ EFX_BUG_ON_PARANOID(!len);
+ buffer->len = len;
+ buffer->skb = skb;
+ buffer->continuation = !end_of_packet;
+ buffer->unmap_addr = unmap_addr;
+ buffer->unmap_len = unmap_len;
+ return 0;
+}
+
+
+/*
+ * Put a TSO header into the TX queue.
+ *
+ * This is special-cased because we know that it is small enough to fit in
+ * a single fragment, and we know it doesn't cross a page boundary. It
+ * also allows us to not worry about end-of-packet etc.
+ */
+static inline void efx_tso_put_header(struct efx_tx_queue *tx_queue,
+ struct efx_tso_header *tsoh, unsigned len)
+{
+ struct efx_tx_buffer *buffer;
+
+ buffer = &tx_queue->buffer[tx_queue->insert_count &
+ tx_queue->efx->type->txd_ring_mask];
+ efx_tsoh_free(tx_queue, buffer);
+ EFX_BUG_ON_PARANOID(buffer->len);
+ EFX_BUG_ON_PARANOID(buffer->unmap_len);
+ EFX_BUG_ON_PARANOID(buffer->skb);
+ EFX_BUG_ON_PARANOID(buffer->continuation != 1);
+ EFX_BUG_ON_PARANOID(buffer->tsoh);
+ buffer->len = len;
+ buffer->dma_addr = tsoh->dma_addr;
+ buffer->tsoh = tsoh;
+
+ ++tx_queue->insert_count;
+}
+
+
+/* Remove descriptors put into a tx_queue. */
+static void efx_enqueue_unwind(struct efx_tx_queue *tx_queue)
+{
+ struct efx_tx_buffer *buffer;
+
+ /* Work backwards until we hit the original insert pointer value */
+ while (tx_queue->insert_count != tx_queue->write_count) {
+ --tx_queue->insert_count;
+ buffer = &tx_queue->buffer[tx_queue->insert_count &
+ tx_queue->efx->type->txd_ring_mask];
+ efx_tsoh_free(tx_queue, buffer);
+ EFX_BUG_ON_PARANOID(buffer->skb);
+ buffer->len = 0;
+ buffer->continuation = 1;
+ if (buffer->unmap_len) {
+ pci_unmap_page(tx_queue->efx->pci_dev,
+ buffer->unmap_addr,
+ buffer->unmap_len, PCI_DMA_TODEVICE);
+ buffer->unmap_len = 0;
+ }
+ }
+}
+
+
+/* Parse the SKB header and initialise state. */
+static inline void tso_start(struct tso_state *st, const struct sk_buff *skb)
+{
+ /* All ethernet/IP/TCP headers combined size is TCP header size
+ * plus offset of TCP header relative to start of packet.
+ */
+ st->p.header_length = ((tcp_hdr(skb)->doff << 2u)
+ + PTR_DIFF(tcp_hdr(skb), skb->data));
+ st->p.full_packet_size = (st->p.header_length
+ + skb_shinfo(skb)->gso_size);
+
+ st->p.ipv4_id = ntohs(ip_hdr(skb)->id);
+ st->seqnum = ntohl(tcp_hdr(skb)->seq);
+
+ EFX_BUG_ON_PARANOID(tcp_hdr(skb)->urg);
+ EFX_BUG_ON_PARANOID(tcp_hdr(skb)->syn);
+ EFX_BUG_ON_PARANOID(tcp_hdr(skb)->rst);
+
+ st->packet_space = st->p.full_packet_size;
+ st->remaining_len = skb->len - st->p.header_length;
+}
+
+
+/**
+ * tso_get_fragment - record fragment details and map for DMA
+ * @st: TSO state
+ * @efx: Efx NIC
+ * @data: Pointer to fragment data
+ * @len: Length of fragment
+ *
+ * Record fragment details and map for DMA. Return 0 on success, or
+ * -%ENOMEM if DMA mapping fails.
+ */
+static inline int tso_get_fragment(struct tso_state *st, struct efx_nic *efx,
+ int len, struct page *page, int page_off)
+{
+
+ st->ifc.unmap_addr = pci_map_page(efx->pci_dev, page, page_off,
+ len, PCI_DMA_TODEVICE);
+ if (likely(!pci_dma_mapping_error(st->ifc.unmap_addr))) {
+ st->ifc.unmap_len = len;
+ st->ifc.len = len;
+ st->ifc.dma_addr = st->ifc.unmap_addr;
+ st->ifc.page = page;
+ st->ifc.page_off = page_off;
+ return 0;
+ }
+ return -ENOMEM;
+}
+
+
+/**
+ * tso_fill_packet_with_fragment - form descriptors for the current fragment
+ * @tx_queue: Efx TX queue
+ * @skb: Socket buffer
+ * @st: TSO state
+ *
+ * Form descriptors for the current fragment, until we reach the end
+ * of fragment or end-of-packet. Return 0 on success, 1 if not enough
+ * space in @tx_queue.
+ */
+static inline int tso_fill_packet_with_fragment(struct efx_tx_queue *tx_queue,
+ const struct sk_buff *skb,
+ struct tso_state *st)
+{
+
+ int n, end_of_packet, rc;
+
+ if (st->ifc.len == 0)
+ return 0;
+ if (st->packet_space == 0)
+ return 0;
+
+ EFX_BUG_ON_PARANOID(st->ifc.len <= 0);
+ EFX_BUG_ON_PARANOID(st->packet_space <= 0);
+
+ n = min(st->ifc.len, st->packet_space);
+
+ st->packet_space -= n;
+ st->remaining_len -= n;
+ st->ifc.len -= n;
+ st->ifc.page_off += n;
+ end_of_packet = st->remaining_len == 0 || st->packet_space == 0;
+
+ rc = efx_tx_queue_insert(tx_queue, st->ifc.dma_addr, n,
+ st->remaining_len ? NULL : skb,
+ end_of_packet, st->ifc.unmap_addr,
+ st->ifc.len ? 0 : st->ifc.unmap_len);
+
+ st->ifc.dma_addr += n;
+
+ return rc;
+}
+
+
+/**
+ * tso_start_new_packet - generate a new header and prepare for the new packet
+ * @tx_queue: Efx TX queue
+ * @skb: Socket buffer
+ * @st: TSO state
+ *
+ * Generate a new header and prepare for the new packet. Return 0 on
+ * success, or -1 if failed to alloc header.
+ */
+static inline int tso_start_new_packet(struct efx_tx_queue *tx_queue,
+ const struct sk_buff *skb,
+ struct tso_state *st)
+{
+ struct efx_tso_header *tsoh;
+ struct iphdr *tsoh_iph;
+ struct tcphdr *tsoh_th;
+ unsigned ip_length;
+ u8 *header;
+
+ /* Allocate a DMA-mapped header buffer. */
+ if (likely(TSOH_SIZE(st->p.header_length) <= TSOH_STD_SIZE)) {
+ if (tx_queue->tso_headers_free == NULL) {
+ if (efx_tsoh_block_alloc(tx_queue))
+ return -1;
+ }
+ EFX_BUG_ON_PARANOID(!tx_queue->tso_headers_free);
+ tsoh = tx_queue->tso_headers_free;
+ tx_queue->tso_headers_free = tsoh->next;
+ tsoh->unmap_len = 0;
+ } else {
+ tx_queue->tso_long_headers++;
+ tsoh = efx_tsoh_heap_alloc(tx_queue, st->p.header_length);
+ if (unlikely(!tsoh))
+ return -1;
+ }
+
+ header = TSOH_BUFFER(tsoh);
+ tsoh_th = (struct tcphdr *)(header + SKB_TCP_OFF(skb));
+ tsoh_iph = (struct iphdr *)(header + SKB_IPV4_OFF(skb));
+
+ /* Copy and update the headers. */
+ memcpy(header, skb->data, st->p.header_length);
+
+ tsoh_th->seq = htonl(st->seqnum);
+ st->seqnum += skb_shinfo(skb)->gso_size;
+ if (st->remaining_len > skb_shinfo(skb)->gso_size) {
+ /* This packet will not finish the TSO burst. */
+ ip_length = st->p.full_packet_size - ETH_HDR_LEN(skb);
+ tsoh_th->fin = 0;
+ tsoh_th->psh = 0;
+ } else {
+ /* This packet will be the last in the TSO burst. */
+ ip_length = (st->p.header_length - ETH_HDR_LEN(skb)
+ + st->remaining_len);
+ tsoh_th->fin = tcp_hdr(skb)->fin;
+ tsoh_th->psh = tcp_hdr(skb)->psh;
+ }
+ tsoh_iph->tot_len = htons(ip_length);
+
+ /* Linux leaves suitable gaps in the IP ID space for us to fill. */
+ tsoh_iph->id = htons(st->p.ipv4_id);
+ st->p.ipv4_id++;
+
+ st->packet_space = skb_shinfo(skb)->gso_size;
+ ++tx_queue->tso_packets;
+
+ /* Form a descriptor for this header. */
+ efx_tso_put_header(tx_queue, tsoh, st->p.header_length);
+
+ return 0;
+}
+
+
+/**
+ * efx_enqueue_skb_tso - segment and transmit a TSO socket buffer
+ * @tx_queue: Efx TX queue
+ * @skb: Socket buffer
+ *
+ * Context: You must hold netif_tx_lock() to call this function.
+ *
+ * Add socket buffer @skb to @tx_queue, doing TSO or return != 0 if
+ * @skb was not enqueued. In all cases @skb is consumed. Return
+ * %NETDEV_TX_OK or %NETDEV_TX_BUSY.
+ */
+static int efx_enqueue_skb_tso(struct efx_tx_queue *tx_queue,
+ const struct sk_buff *skb)
+{
+ int frag_i, rc, rc2 = NETDEV_TX_OK;
+ struct tso_state state;
+ skb_frag_t *f;
+
+ /* Verify TSO is safe - these checks should never fail. */
+ efx_tso_check_safe(skb);
+
+ EFX_BUG_ON_PARANOID(tx_queue->write_count != tx_queue->insert_count);
+
+ tso_start(&state, skb);
+
+ /* Assume that skb header area contains exactly the headers, and
+ * all payload is in the frag list.
+ */
+ if (skb_headlen(skb) == state.p.header_length) {
+ /* Grab the first payload fragment. */
+ EFX_BUG_ON_PARANOID(skb_shinfo(skb)->nr_frags < 1);
+ frag_i = 0;
+ f = &skb_shinfo(skb)->frags[frag_i];
+ rc = tso_get_fragment(&state, tx_queue->efx,
+ f->size, f->page, f->page_offset);
+ if (rc)
+ goto mem_err;
+ } else {
+ /* It may look like this code fragment assumes that the
+ * skb->data portion does not cross a page boundary, but
+ * that is not the case. It is guaranteed to be direct
+ * mapped memory, and therefore is physically contiguous,
+ * and so DMA will work fine. kmap_atomic() on this region
+ * will just return the direct mapping, so that will work
+ * too.
+ */
+ int page_off = (unsigned long)skb->data & (PAGE_SIZE - 1);
+ int hl = state.p.header_length;
+ rc = tso_get_fragment(&state, tx_queue->efx,
+ skb_headlen(skb) - hl,
+ virt_to_page(skb->data), page_off + hl);
+ if (rc)
+ goto mem_err;
+ frag_i = -1;
+ }
+
+ if (tso_start_new_packet(tx_queue, skb, &state) < 0)
+ goto mem_err;
+
+ while (1) {
+ rc = tso_fill_packet_with_fragment(tx_queue, skb, &state);
+ if (unlikely(rc))
+ goto stop;
+
+ /* Move onto the next fragment? */
+ if (state.ifc.len == 0) {
+ if (++frag_i >= skb_shinfo(skb)->nr_frags)
+ /* End of payload reached. */
+ break;
+ f = &skb_shinfo(skb)->frags[frag_i];
+ rc = tso_get_fragment(&state, tx_queue->efx,
+ f->size, f->page, f->page_offset);
+ if (rc)
+ goto mem_err;
+ }
+
+ /* Start at new packet? */
+ if (state.packet_space == 0 &&
+ tso_start_new_packet(tx_queue, skb, &state) < 0)
+ goto mem_err;
+ }
+
+ /* Pass off to hardware */
+ falcon_push_buffers(tx_queue);
+
+ tx_queue->tso_bursts++;
+ return NETDEV_TX_OK;
+
+ mem_err:
+ EFX_ERR(tx_queue->efx, "Out of memory for TSO headers, or PCI mapping"
+ " error\n");
+ dev_kfree_skb_any((struct sk_buff *)skb);
+ goto unwind;
+
+ stop:
+ rc2 = NETDEV_TX_BUSY;
+
+ /* Stop the queue if it wasn't stopped before. */
+ if (tx_queue->stopped == 1)
+ efx_stop_queue(tx_queue->efx);
+
+ unwind:
+ efx_enqueue_unwind(tx_queue);
+ return rc2;
+}
+
+
+/*
+ * Free up all TSO datastructures associated with tx_queue. This
+ * routine should be called only once the tx_queue is both empty and
+ * will no longer be used.
+ */
+static void efx_fini_tso(struct efx_tx_queue *tx_queue)
+{
+ unsigned i;
+
+ if (tx_queue->buffer) {
+ for (i = 0; i <= tx_queue->efx->type->txd_ring_mask; ++i)
+ efx_tsoh_free(tx_queue, &tx_queue->buffer[i]);
+ }
+
+ while (tx_queue->tso_headers_free != NULL)
+ efx_tsoh_block_free(tx_queue, tx_queue->tso_headers_free,
+ tx_queue->efx->pci_dev);
+}
diff --git a/drivers/net/sfc/workarounds.h b/drivers/net/sfc/workarounds.h
index dca62f1..35ab19c2 100644
--- a/drivers/net/sfc/workarounds.h
+++ b/drivers/net/sfc/workarounds.h
@@ -16,7 +16,7 @@
*/
#define EFX_WORKAROUND_ALWAYS(efx) 1
-#define EFX_WORKAROUND_FALCON_A(efx) (FALCON_REV(efx) <= FALCON_REV_A1)
+#define EFX_WORKAROUND_FALCON_A(efx) (falcon_rev(efx) <= FALCON_REV_A1)
/* XAUI resets if link not detected */
#define EFX_WORKAROUND_5147 EFX_WORKAROUND_ALWAYS
diff --git a/drivers/net/sfc/xfp_phy.c b/drivers/net/sfc/xfp_phy.c
index 66dd5bf..f3684ad 100644
--- a/drivers/net/sfc/xfp_phy.c
+++ b/drivers/net/sfc/xfp_phy.c
@@ -24,6 +24,10 @@
MDIO_MMDREG_DEVS0_PMAPMD | \
MDIO_MMDREG_DEVS0_PHYXS)
+#define XFP_LOOPBACKS ((1 << LOOPBACK_PCS) | \
+ (1 << LOOPBACK_PMAPMD) | \
+ (1 << LOOPBACK_NETWORK))
+
/****************************************************************************/
/* Quake-specific MDIO registers */
#define MDIO_QUAKE_LED0_REG (0xD006)
@@ -35,6 +39,10 @@
mode);
}
+struct xfp_phy_data {
+ int tx_disabled;
+};
+
#define XFP_MAX_RESET_TIME 500
#define XFP_RESET_WAIT 10
@@ -72,18 +80,33 @@
static int xfp_phy_init(struct efx_nic *efx)
{
+ struct xfp_phy_data *phy_data;
u32 devid = mdio_clause45_read_id(efx, MDIO_MMD_PHYXS);
int rc;
+ phy_data = kzalloc(sizeof(struct xfp_phy_data), GFP_KERNEL);
+ if (!phy_data)
+ return -ENOMEM;
+ efx->phy_data = phy_data;
+
EFX_INFO(efx, "XFP: PHY ID reg %x (OUI %x model %x revision"
" %x)\n", devid, MDIO_ID_OUI(devid), MDIO_ID_MODEL(devid),
MDIO_ID_REV(devid));
+ phy_data->tx_disabled = efx->tx_disabled;
+
rc = xfp_reset_phy(efx);
EFX_INFO(efx, "XFP: PHY init %s.\n",
rc ? "failed" : "successful");
+ if (rc < 0)
+ goto fail;
+ return 0;
+
+ fail:
+ kfree(efx->phy_data);
+ efx->phy_data = NULL;
return rc;
}
@@ -110,6 +133,16 @@
static void xfp_phy_reconfigure(struct efx_nic *efx)
{
+ struct xfp_phy_data *phy_data = efx->phy_data;
+
+ /* Reset the PHY when moving from tx off to tx on */
+ if (phy_data->tx_disabled && !efx->tx_disabled)
+ xfp_reset_phy(efx);
+
+ mdio_clause45_transmit_disable(efx);
+ mdio_clause45_phy_reconfigure(efx);
+
+ phy_data->tx_disabled = efx->tx_disabled;
efx->link_up = xfp_link_ok(efx);
efx->link_options = GM_LPA_10000FULL;
}
@@ -119,6 +152,10 @@
{
/* Clobber the LED if it was blinking */
efx->board_info.blink(efx, 0);
+
+ /* Free the context block */
+ kfree(efx->phy_data);
+ efx->phy_data = NULL;
}
struct efx_phy_operations falcon_xfp_phy_ops = {
@@ -129,4 +166,5 @@
.clear_interrupt = xfp_phy_clear_interrupt,
.reset_xaui = efx_port_dummy_op_void,
.mmds = XFP_REQUIRED_DEVS,
+ .loopbacks = XFP_LOOPBACKS,
};
diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index f226bca..62436b3 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -1159,17 +1159,9 @@
}
#ifdef SKY2_VLAN_TAG_USED
-static void sky2_vlan_rx_register(struct net_device *dev, struct vlan_group *grp)
+static void sky2_set_vlan_mode(struct sky2_hw *hw, u16 port, bool onoff)
{
- struct sky2_port *sky2 = netdev_priv(dev);
- struct sky2_hw *hw = sky2->hw;
- u16 port = sky2->port;
-
- netif_tx_lock_bh(dev);
- napi_disable(&hw->napi);
-
- sky2->vlgrp = grp;
- if (grp) {
+ if (onoff) {
sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T),
RX_VLAN_STRIP_ON);
sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T),
@@ -1180,6 +1172,19 @@
sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T),
TX_VLAN_TAG_OFF);
}
+}
+
+static void sky2_vlan_rx_register(struct net_device *dev, struct vlan_group *grp)
+{
+ struct sky2_port *sky2 = netdev_priv(dev);
+ struct sky2_hw *hw = sky2->hw;
+ u16 port = sky2->port;
+
+ netif_tx_lock_bh(dev);
+ napi_disable(&hw->napi);
+
+ sky2->vlgrp = grp;
+ sky2_set_vlan_mode(hw, port, grp != NULL);
sky2_read32(hw, B0_Y2_SP_LISR);
napi_enable(&hw->napi);
@@ -1418,6 +1423,10 @@
sky2_prefetch_init(hw, txqaddr[port], sky2->tx_le_map,
TX_RING_SIZE - 1);
+#ifdef SKY2_VLAN_TAG_USED
+ sky2_set_vlan_mode(hw, port, sky2->vlgrp != NULL);
+#endif
+
err = sky2_rx_start(sky2);
if (err)
goto err_out;
@@ -4395,7 +4404,9 @@
if (err) {
printk(KERN_ERR PFX "%s: could not up: %d\n",
dev->name, err);
+ rtnl_lock();
dev_close(dev);
+ rtnl_unlock();
goto out;
}
}
diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h
index 7bb3ba9..c0a5eea 100644
--- a/drivers/net/sky2.h
+++ b/drivers/net/sky2.h
@@ -1966,13 +1966,13 @@
struct tx_ring_info {
struct sk_buff *skb;
DECLARE_PCI_UNMAP_ADDR(mapaddr);
- DECLARE_PCI_UNMAP_ADDR(maplen);
+ DECLARE_PCI_UNMAP_LEN(maplen);
};
struct rx_ring_info {
struct sk_buff *skb;
dma_addr_t data_addr;
- DECLARE_PCI_UNMAP_ADDR(data_size);
+ DECLARE_PCI_UNMAP_LEN(data_size);
dma_addr_t frag_addr[ETH_JUMBO_MTU >> PAGE_SHIFT];
};
diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c
index 4e28002..e2ee91a 100644
--- a/drivers/net/smc911x.c
+++ b/drivers/net/smc911x.c
@@ -136,7 +136,6 @@
/* work queue */
struct work_struct phy_configure;
- int work_pending;
int tx_throttle;
spinlock_t lock;
@@ -960,11 +959,11 @@
* We should not be called if phy_type is zero.
*/
if (lp->phy_type == 0)
- goto smc911x_phy_configure_exit_nolock;
+ return;
if (smc911x_phy_reset(dev, phyaddr)) {
printk("%s: PHY reset timed out\n", dev->name);
- goto smc911x_phy_configure_exit_nolock;
+ return;
}
spin_lock_irqsave(&lp->lock, flags);
@@ -1033,8 +1032,6 @@
smc911x_phy_configure_exit:
spin_unlock_irqrestore(&lp->lock, flags);
-smc911x_phy_configure_exit_nolock:
- lp->work_pending = 0;
}
/*
@@ -1356,11 +1353,8 @@
* smc911x_phy_configure() calls msleep() which calls schedule_timeout()
* which calls schedule(). Hence we use a work queue.
*/
- if (lp->phy_type != 0) {
- if (schedule_work(&lp->phy_configure)) {
- lp->work_pending = 1;
- }
- }
+ if (lp->phy_type != 0)
+ schedule_work(&lp->phy_configure);
/* We can accept TX packets again */
dev->trans_start = jiffies;
@@ -1531,16 +1525,8 @@
if (lp->phy_type != 0) {
/* We need to ensure that no calls to
* smc911x_phy_configure are pending.
-
- * flush_scheduled_work() cannot be called because we
- * are running with the netlink semaphore held (from
- * devinet_ioctl()) and the pending work queue
- * contains linkwatch_event() (scheduled by
- * netif_carrier_off() above). linkwatch_event() also
- * wants the netlink semaphore.
*/
- while (lp->work_pending)
- schedule();
+ cancel_work_sync(&lp->phy_configure);
smc911x_phy_powerdown(dev, lp->mii.phy_id);
}
diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c
index a188e33..f2051b2 100644
--- a/drivers/net/smc91x.c
+++ b/drivers/net/smc91x.c
@@ -1016,15 +1016,8 @@
/* We need to ensure that no calls to smc_phy_configure are
pending.
-
- flush_scheduled_work() cannot be called because we are
- running with the netlink semaphore held (from
- devinet_ioctl()) and the pending work queue contains
- linkwatch_event() (scheduled by netif_carrier_off()
- above). linkwatch_event() also wants the netlink semaphore.
*/
- while(lp->work_pending)
- yield();
+ cancel_work_sync(&lp->phy_configure);
bmcr = smc_phy_read(dev, phy, MII_BMCR);
smc_phy_write(dev, phy, MII_BMCR, bmcr | BMCR_PDOWN);
@@ -1161,7 +1154,6 @@
smc_phy_configure_exit:
SMC_SELECT_BANK(lp, 2);
spin_unlock_irq(&lp->lock);
- lp->work_pending = 0;
}
/*
@@ -1389,11 +1381,8 @@
* smc_phy_configure() calls msleep() which calls schedule_timeout()
* which calls schedule(). Hence we use a work queue.
*/
- if (lp->phy_type != 0) {
- if (schedule_work(&lp->phy_configure)) {
- lp->work_pending = 1;
- }
- }
+ if (lp->phy_type != 0)
+ schedule_work(&lp->phy_configure);
/* We can accept TX packets again */
dev->trans_start = jiffies;
diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h
index 69e97a1..86068186 100644
--- a/drivers/net/smc91x.h
+++ b/drivers/net/smc91x.h
@@ -93,14 +93,14 @@
#define SMC_insw(a, r, p, l) insw ((unsigned long *)((a) + (r)), p, l)
# endif
/* check if the mac in reg is valid */
-#define SMC_GET_MAC_ADDR(addr) \
+#define SMC_GET_MAC_ADDR(lp, addr) \
do { \
unsigned int __v; \
- __v = SMC_inw(ioaddr, ADDR0_REG); \
+ __v = SMC_inw(ioaddr, ADDR0_REG(lp)); \
addr[0] = __v; addr[1] = __v >> 8; \
- __v = SMC_inw(ioaddr, ADDR1_REG); \
+ __v = SMC_inw(ioaddr, ADDR1_REG(lp)); \
addr[2] = __v; addr[3] = __v >> 8; \
- __v = SMC_inw(ioaddr, ADDR2_REG); \
+ __v = SMC_inw(ioaddr, ADDR2_REG(lp)); \
addr[4] = __v; addr[5] = __v >> 8; \
if (*(u32 *)(&addr[0]) == 0xFFFFFFFF) { \
random_ether_addr(addr); \
diff --git a/drivers/net/sun3lance.c b/drivers/net/sun3lance.c
index f8d4613..359452a 100644
--- a/drivers/net/sun3lance.c
+++ b/drivers/net/sun3lance.c
@@ -250,6 +250,9 @@
static int found;
int err = -ENODEV;
+ if (!MACH_IS_SUN3 && !MACH_IS_SUN3X)
+ return ERR_PTR(-ENODEV);
+
/* check that this machine has an onboard lance */
switch(idprom->id_machtype) {
case SM_SUN3|SM_3_50:
diff --git a/drivers/net/sunhme.c b/drivers/net/sunhme.c
index b4e7f30..1aa425b 100644
--- a/drivers/net/sunhme.c
+++ b/drivers/net/sunhme.c
@@ -111,7 +111,7 @@
struct hme_tx_logent *tlp;
unsigned long flags;
- save_and_cli(flags);
+ local_irq_save(flags);
tlp = &tx_log[txlog_cur_entry];
tlp->tstamp = (unsigned int)jiffies;
tlp->tx_new = hp->tx_new;
@@ -119,7 +119,7 @@
tlp->action = a;
tlp->status = s;
txlog_cur_entry = (txlog_cur_entry + 1) & (TX_LOG_LEN - 1);
- restore_flags(flags);
+ local_irq_restore(flags);
}
static __inline__ void tx_dump_log(void)
{
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 07b3f77..cc4bde8 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -64,8 +64,8 @@
#define DRV_MODULE_NAME "tg3"
#define PFX DRV_MODULE_NAME ": "
-#define DRV_MODULE_VERSION "3.92"
-#define DRV_MODULE_RELDATE "May 2, 2008"
+#define DRV_MODULE_VERSION "3.92.1"
+#define DRV_MODULE_RELDATE "June 9, 2008"
#define TG3_DEF_MAC_MODE 0
#define TG3_DEF_RX_MODE 0
@@ -1295,6 +1295,21 @@
GRC_LCLCTRL_GPIO_OUTPUT0 |
GRC_LCLCTRL_GPIO_OUTPUT1),
100);
+ } else if (tp->pdev->device == PCI_DEVICE_ID_TIGON3_5761) {
+ /* The 5761 non-e device swaps GPIO 0 and GPIO 2. */
+ u32 grc_local_ctrl = GRC_LCLCTRL_GPIO_OE0 |
+ GRC_LCLCTRL_GPIO_OE1 |
+ GRC_LCLCTRL_GPIO_OE2 |
+ GRC_LCLCTRL_GPIO_OUTPUT0 |
+ GRC_LCLCTRL_GPIO_OUTPUT1 |
+ tp->grc_local_ctrl;
+ tw32_wait_f(GRC_LOCAL_CTRL, grc_local_ctrl, 100);
+
+ grc_local_ctrl |= GRC_LCLCTRL_GPIO_OUTPUT2;
+ tw32_wait_f(GRC_LOCAL_CTRL, grc_local_ctrl, 100);
+
+ grc_local_ctrl &= ~GRC_LCLCTRL_GPIO_OUTPUT0;
+ tw32_wait_f(GRC_LOCAL_CTRL, grc_local_ctrl, 100);
} else {
u32 no_gpio2;
u32 grc_local_ctrl = 0;
@@ -3168,8 +3183,7 @@
err |= tg3_readphy(tp, MII_BMCR, &bmcr);
if ((tp->link_config.autoneg == AUTONEG_ENABLE) && !force_reset &&
- (tp->tg3_flags2 & TG3_FLG2_PARALLEL_DETECT) &&
- tp->link_config.flowctrl == tp->link_config.active_flowctrl) {
+ (tp->tg3_flags2 & TG3_FLG2_PARALLEL_DETECT)) {
/* do nothing, just check for link up at the end */
} else if (tp->link_config.autoneg == AUTONEG_ENABLE) {
u32 adv, new_adv;
@@ -8599,7 +8613,7 @@
(cmd->speed == SPEED_1000))
return -EINVAL;
else if ((cmd->speed == SPEED_1000) &&
- (tp->tg3_flags2 & TG3_FLAG_10_100_ONLY))
+ (tp->tg3_flags & TG3_FLAG_10_100_ONLY))
return -EINVAL;
tg3_full_lock(tp, 0);
@@ -11768,6 +11782,15 @@
if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5755)
tp->grc_local_ctrl |= GRC_LCLCTRL_GPIO_UART_SEL;
+ if (tp->pdev->device == PCI_DEVICE_ID_TIGON3_5761) {
+ /* Turn off the debug UART. */
+ tp->grc_local_ctrl |= GRC_LCLCTRL_GPIO_UART_SEL;
+ if (tp->tg3_flags2 & TG3_FLG2_IS_NIC)
+ /* Keep VMain power. */
+ tp->grc_local_ctrl |= GRC_LCLCTRL_GPIO_OE0 |
+ GRC_LCLCTRL_GPIO_OUTPUT0;
+ }
+
/* Force the chip into D0. */
err = tg3_set_power_state(tp, PCI_D0);
if (err) {
diff --git a/drivers/net/tokenring/3c359.h b/drivers/net/tokenring/3c359.h
index b880cba..74cf8e1 100644
--- a/drivers/net/tokenring/3c359.h
+++ b/drivers/net/tokenring/3c359.h
@@ -264,7 +264,7 @@
u16 asb;
u8 __iomem *xl_mmio;
- char *xl_card_name;
+ const char *xl_card_name;
struct pci_dev *pdev ;
spinlock_t xl_lock ;
diff --git a/drivers/net/tokenring/olympic.h b/drivers/net/tokenring/olympic.h
index c919563..10fbba0 100644
--- a/drivers/net/tokenring/olympic.h
+++ b/drivers/net/tokenring/olympic.h
@@ -254,7 +254,7 @@
u8 __iomem *olympic_mmio;
u8 __iomem *olympic_lap;
struct pci_dev *pdev ;
- char *olympic_card_name ;
+ const char *olympic_card_name;
spinlock_t olympic_lock ;
diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/tulip/tulip_core.c
index f9d13fa..af8d2c4 100644
--- a/drivers/net/tulip/tulip_core.c
+++ b/drivers/net/tulip/tulip_core.c
@@ -731,7 +731,7 @@
void __iomem *ioaddr = tp->base_addr;
unsigned long flags;
- flush_scheduled_work();
+ cancel_work_sync(&tp->media_work);
#ifdef CONFIG_TULIP_NAPI
napi_disable(&tp->napi);
@@ -1729,12 +1729,15 @@
if (!dev)
return -EINVAL;
- if (netif_running(dev))
- tulip_down(dev);
+ if (!netif_running(dev))
+ goto save_state;
+
+ tulip_down(dev);
netif_device_detach(dev);
free_irq(dev->irq, dev);
+save_state:
pci_save_state(pdev);
pci_disable_device(pdev);
pci_set_power_state(pdev, pci_choose_state(pdev, state));
@@ -1754,6 +1757,9 @@
pci_set_power_state(pdev, PCI_D0);
pci_restore_state(pdev);
+ if (!netif_running(dev))
+ return 0;
+
if ((retval = pci_enable_device(pdev))) {
printk (KERN_ERR "tulip: pci_enable_device failed in resume\n");
return retval;
diff --git a/drivers/net/tulip/uli526x.c b/drivers/net/tulip/uli526x.c
index 2511ca7..e9e62862 100644
--- a/drivers/net/tulip/uli526x.c
+++ b/drivers/net/tulip/uli526x.c
@@ -225,6 +225,9 @@
static const struct ethtool_ops netdev_ethtool_ops;
static u16 read_srom_word(long, int);
static irqreturn_t uli526x_interrupt(int, void *);
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void uli526x_poll(struct net_device *dev);
+#endif
static void uli526x_descriptor_init(struct uli526x_board_info *, unsigned long);
static void allocate_rx_buffer(struct uli526x_board_info *);
static void update_cr6(u32, unsigned long);
@@ -339,6 +342,9 @@
dev->get_stats = &uli526x_get_stats;
dev->set_multicast_list = &uli526x_set_filter_mode;
dev->ethtool_ops = &netdev_ethtool_ops;
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ dev->poll_controller = &uli526x_poll;
+#endif
spin_lock_init(&db->lock);
@@ -681,8 +687,9 @@
db->cr5_data = inl(ioaddr + DCR5);
outl(db->cr5_data, ioaddr + DCR5);
if ( !(db->cr5_data & 0x180c1) ) {
- spin_unlock_irqrestore(&db->lock, flags);
+ /* Restore CR7 to enable interrupt mask */
outl(db->cr7_data, ioaddr + DCR7);
+ spin_unlock_irqrestore(&db->lock, flags);
return IRQ_HANDLED;
}
@@ -715,6 +722,13 @@
return IRQ_HANDLED;
}
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void uli526x_poll(struct net_device *dev)
+{
+ /* ISR grabs the irqsave lock, so this should be safe */
+ uli526x_interrupt(dev->irq, dev);
+}
+#endif
/*
* Free TX resource after TX complete
diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c
index ca0bdac..fb0b918 100644
--- a/drivers/net/ucc_geth.c
+++ b/drivers/net/ucc_geth.c
@@ -237,7 +237,7 @@
skb->dev = ugeth->dev;
out_be32(&((struct qe_bd __iomem *)bd)->buf,
- dma_map_single(NULL,
+ dma_map_single(&ugeth->dev->dev,
skb->data,
ugeth->ug_info->uf_info.max_rx_buf_length +
UCC_GETH_RX_DATA_BUF_ALIGNMENT,
@@ -2158,7 +2158,7 @@
continue;
for (j = 0; j < ugeth->ug_info->bdRingLenTx[i]; j++) {
if (ugeth->tx_skbuff[i][j]) {
- dma_unmap_single(NULL,
+ dma_unmap_single(&ugeth->dev->dev,
in_be32(&((struct qe_bd __iomem *)bd)->buf),
(in_be32((u32 __iomem *)bd) &
BD_LENGTH_MASK),
@@ -2186,7 +2186,7 @@
bd = ugeth->p_rx_bd_ring[i];
for (j = 0; j < ugeth->ug_info->bdRingLenRx[i]; j++) {
if (ugeth->rx_skbuff[i][j]) {
- dma_unmap_single(NULL,
+ dma_unmap_single(&ugeth->dev->dev,
in_be32(&((struct qe_bd __iomem *)bd)->buf),
ugeth->ug_info->
uf_info.max_rx_buf_length +
@@ -3406,7 +3406,8 @@
/* set up the buffer descriptor */
out_be32(&((struct qe_bd __iomem *)bd)->buf,
- dma_map_single(NULL, skb->data, skb->len, DMA_TO_DEVICE));
+ dma_map_single(&ugeth->dev->dev, skb->data,
+ skb->len, DMA_TO_DEVICE));
/* printk(KERN_DEBUG"skb->data is 0x%x\n",skb->data); */
diff --git a/drivers/net/ucc_geth_ethtool.c b/drivers/net/ucc_geth_ethtool.c
index 299b7f1..f5839c4 100644
--- a/drivers/net/ucc_geth_ethtool.c
+++ b/drivers/net/ucc_geth_ethtool.c
@@ -73,6 +73,7 @@
"tx-frames-ok",
"tx-excessive-differ-frames",
"tx-256-511-frames",
+ "tx-512-1023-frames",
"tx-1024-1518-frames",
"tx-jumbo-frames",
};
@@ -308,7 +309,7 @@
buf += UEC_TX_FW_STATS_LEN * ETH_GSTRING_LEN;
}
if (stats_mode & UCC_GETH_STATISTICS_GATHERING_MODE_FIRMWARE_RX)
- memcpy(buf, tx_fw_stat_gstrings, UEC_RX_FW_STATS_LEN *
+ memcpy(buf, rx_fw_stat_gstrings, UEC_RX_FW_STATS_LEN *
ETH_GSTRING_LEN);
}
diff --git a/drivers/net/usb/asix.c b/drivers/net/usb/asix.c
index dc6f097..37ecf84 100644
--- a/drivers/net/usb/asix.c
+++ b/drivers/net/usb/asix.c
@@ -1440,6 +1440,10 @@
// Belkin F5D5055
USB_DEVICE(0x050d, 0x5055),
.driver_info = (unsigned long) &ax88178_info,
+}, {
+ // Apple USB Ethernet Adapter
+ USB_DEVICE(0x05ac, 0x1402),
+ .driver_info = (unsigned long) &ax88772_info,
},
{ }, // END
};
diff --git a/drivers/net/usb/catc.c b/drivers/net/usb/catc.c
index 76752d84..22c17bb 100644
--- a/drivers/net/usb/catc.c
+++ b/drivers/net/usb/catc.c
@@ -423,7 +423,10 @@
catc->tx_ptr = (((catc->tx_ptr - 1) >> 6) + 1) << 6;
tx_buf = catc->tx_buf[catc->tx_idx] + catc->tx_ptr;
- *((u16*)tx_buf) = (catc->is_f5u011) ? cpu_to_be16((u16)skb->len) : cpu_to_le16((u16)skb->len);
+ if (catc->is_f5u011)
+ *(__be16 *)tx_buf = cpu_to_be16(skb->len);
+ else
+ *(__le16 *)tx_buf = cpu_to_le16(skb->len);
skb_copy_from_linear_data(skb, tx_buf + 2, skb->len);
catc->tx_ptr += skb->len + 2;
diff --git a/drivers/net/usb/cdc_subset.c b/drivers/net/usb/cdc_subset.c
index 0ec7936..c66b9c3 100644
--- a/drivers/net/usb/cdc_subset.c
+++ b/drivers/net/usb/cdc_subset.c
@@ -218,7 +218,7 @@
/*-------------------------------------------------------------------------*/
#ifndef HAVE_HARDWARE
-#error You need to configure some hardware for this driver
+#warning You need to configure some hardware for this driver
#endif
/*
diff --git a/drivers/net/usb/kaweth.c b/drivers/net/usb/kaweth.c
index 0dcfc03..7c66b05 100644
--- a/drivers/net/usb/kaweth.c
+++ b/drivers/net/usb/kaweth.c
@@ -706,7 +706,7 @@
usb_kill_urb(kaweth->rx_urb);
usb_kill_urb(kaweth->tx_urb);
- flush_scheduled_work();
+ cancel_delayed_work_sync(&kaweth->lowmem_work);
/* a scheduled work may have resubmitted,
we hit them again */
diff --git a/drivers/net/usb/rndis_host.c b/drivers/net/usb/rndis_host.c
index 21a7785..ae467f1 100644
--- a/drivers/net/usb/rndis_host.c
+++ b/drivers/net/usb/rndis_host.c
@@ -194,7 +194,7 @@
dev_dbg(&info->control->dev,
"rndis response error, code %d\n", retval);
}
- msleep(2);
+ msleep(20);
}
dev_dbg(&info->control->dev, "rndis response timeout\n");
return -ETIMEDOUT;
@@ -283,8 +283,8 @@
struct rndis_set_c *set_c;
struct rndis_halt *halt;
} u;
- u32 tmp, phym_unspec;
- __le32 *phym;
+ u32 tmp;
+ __le32 phym_unspec, *phym;
int reply_len;
unsigned char *bp;
diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index f926b5a..4452306 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -44,9 +44,16 @@
/* The skb we couldn't send because buffers were full. */
struct sk_buff *last_xmit_skb;
+ /* If we need to free in a timer, this is it. */
+ struct timer_list xmit_free_timer;
+
/* Number of input buffers, and max we've ever had. */
unsigned int num, max;
+ /* For cleaning up after transmission. */
+ struct tasklet_struct tasklet;
+ bool free_in_tasklet;
+
/* Receive & send queues. */
struct sk_buff_head recv;
struct sk_buff_head send;
@@ -68,8 +75,13 @@
/* Suppress further interrupts. */
svq->vq_ops->disable_cb(svq);
- /* We were waiting for more output buffers. */
+
+ /* We were probably waiting for more output buffers. */
netif_wake_queue(vi->dev);
+
+ /* Make sure we re-xmit last_xmit_skb: if there are no more packets
+ * queued, start_xmit won't be called. */
+ tasklet_schedule(&vi->tasklet);
}
static void receive_skb(struct net_device *dev, struct sk_buff *skb,
@@ -86,9 +98,7 @@
BUG_ON(len > MAX_PACKET_LEN);
skb_trim(skb, len);
- skb->protocol = eth_type_trans(skb, dev);
- pr_debug("Receiving skb proto 0x%04x len %i type %i\n",
- ntohs(skb->protocol), skb->len, skb->pkt_type);
+
dev->stats.rx_bytes += skb->len;
dev->stats.rx_packets++;
@@ -98,6 +108,10 @@
goto frame_err;
}
+ skb->protocol = eth_type_trans(skb, dev);
+ pr_debug("Receiving skb proto 0x%04x len %i type %i\n",
+ ntohs(skb->protocol), skb->len, skb->pkt_type);
+
if (hdr->gso_type != VIRTIO_NET_HDR_GSO_NONE) {
pr_debug("GSO!\n");
switch (hdr->gso_type & ~VIRTIO_NET_HDR_GSO_ECN) {
@@ -230,9 +244,25 @@
}
}
+/* If the virtio transport doesn't always notify us when all in-flight packets
+ * are consumed, we fall back to using this function on a timer to free them. */
+static void xmit_free(unsigned long data)
+{
+ struct virtnet_info *vi = (void *)data;
+
+ netif_tx_lock(vi->dev);
+
+ free_old_xmit_skbs(vi);
+
+ if (!skb_queue_empty(&vi->send))
+ mod_timer(&vi->xmit_free_timer, jiffies + (HZ/10));
+
+ netif_tx_unlock(vi->dev);
+}
+
static int xmit_skb(struct virtnet_info *vi, struct sk_buff *skb)
{
- int num;
+ int num, err;
struct scatterlist sg[2+MAX_SKB_FRAGS];
struct virtio_net_hdr *hdr;
const unsigned char *dest = ((struct ethhdr *)skb->data)->h_dest;
@@ -275,7 +305,25 @@
vnet_hdr_to_sg(sg, skb);
num = skb_to_sgvec(skb, sg+1, 0, skb->len) + 1;
- return vi->svq->vq_ops->add_buf(vi->svq, sg, num, 0, skb);
+ err = vi->svq->vq_ops->add_buf(vi->svq, sg, num, 0, skb);
+ if (!err && !vi->free_in_tasklet)
+ mod_timer(&vi->xmit_free_timer, jiffies + (HZ/10));
+
+ return err;
+}
+
+static void xmit_tasklet(unsigned long data)
+{
+ struct virtnet_info *vi = (void *)data;
+
+ netif_tx_lock_bh(vi->dev);
+ if (vi->last_xmit_skb && xmit_skb(vi, vi->last_xmit_skb) == 0) {
+ vi->svq->vq_ops->kick(vi->svq);
+ vi->last_xmit_skb = NULL;
+ }
+ if (vi->free_in_tasklet)
+ free_old_xmit_skbs(vi);
+ netif_tx_unlock_bh(vi->dev);
}
static int start_xmit(struct sk_buff *skb, struct net_device *dev)
@@ -287,21 +335,25 @@
free_old_xmit_skbs(vi);
/* If we has a buffer left over from last time, send it now. */
- if (vi->last_xmit_skb) {
+ if (unlikely(vi->last_xmit_skb)) {
if (xmit_skb(vi, vi->last_xmit_skb) != 0) {
/* Drop this skb: we only queue one. */
vi->dev->stats.tx_dropped++;
kfree_skb(skb);
+ skb = NULL;
goto stop_queue;
}
vi->last_xmit_skb = NULL;
}
/* Put new one in send queue and do transmit */
- __skb_queue_head(&vi->send, skb);
- if (xmit_skb(vi, skb) != 0) {
- vi->last_xmit_skb = skb;
- goto stop_queue;
+ if (likely(skb)) {
+ __skb_queue_head(&vi->send, skb);
+ if (xmit_skb(vi, skb) != 0) {
+ vi->last_xmit_skb = skb;
+ skb = NULL;
+ goto stop_queue;
+ }
}
done:
vi->svq->vq_ops->kick(vi->svq);
@@ -411,6 +463,10 @@
vi->vdev = vdev;
vdev->priv = vi;
+ /* If they give us a callback when all buffers are done, we don't need
+ * the timer. */
+ vi->free_in_tasklet = virtio_has_feature(vdev,VIRTIO_F_NOTIFY_ON_EMPTY);
+
/* We expect two virtqueues, receive then send. */
vi->rvq = vdev->config->find_vq(vdev, 0, skb_recv_done);
if (IS_ERR(vi->rvq)) {
@@ -428,6 +484,11 @@
skb_queue_head_init(&vi->recv);
skb_queue_head_init(&vi->send);
+ tasklet_init(&vi->tasklet, xmit_tasklet, (unsigned long)vi);
+
+ if (!vi->free_in_tasklet)
+ setup_timer(&vi->xmit_free_timer, xmit_free, (unsigned long)vi);
+
err = register_netdev(dev);
if (err) {
pr_debug("virtio_net: registering device failed\n");
@@ -465,13 +526,15 @@
/* Stop all the virtqueues. */
vdev->config->reset(vdev);
+ if (!vi->free_in_tasklet)
+ del_timer_sync(&vi->xmit_free_timer);
+
/* Free our skbs in send and recv queues, if any. */
while ((skb = __skb_dequeue(&vi->recv)) != NULL) {
kfree_skb(skb);
vi->num--;
}
- while ((skb = __skb_dequeue(&vi->send)) != NULL)
- kfree_skb(skb);
+ __skb_queue_purge(&vi->send);
BUG_ON(vi->num != 0);
@@ -489,7 +552,7 @@
static unsigned int features[] = {
VIRTIO_NET_F_CSUM, VIRTIO_NET_F_GSO, VIRTIO_NET_F_MAC,
VIRTIO_NET_F_HOST_TSO4, VIRTIO_NET_F_HOST_UFO, VIRTIO_NET_F_HOST_TSO6,
- VIRTIO_NET_F_HOST_ECN,
+ VIRTIO_NET_F_HOST_ECN, VIRTIO_F_NOTIFY_ON_EMPTY,
};
static struct virtio_driver virtio_net = {
diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig
index 8005dd1..d5140ae 100644
--- a/drivers/net/wan/Kconfig
+++ b/drivers/net/wan/Kconfig
@@ -150,11 +150,9 @@
config HDLC_PPP
tristate "Synchronous Point-to-Point Protocol (PPP) support"
- depends on HDLC && BROKEN
+ depends on HDLC
help
Generic HDLC driver supporting PPP over WAN connections.
- This module is currently broken and will cause a kernel panic
- when a device configured in PPP mode is activated.
It will be replaced by new PPP implementation in Linux 2.6.26.
diff --git a/drivers/net/wan/cosa.c b/drivers/net/wan/cosa.c
index 45ddfc9..b0fce13 100644
--- a/drivers/net/wan/cosa.c
+++ b/drivers/net/wan/cosa.c
@@ -629,7 +629,7 @@
d->base_addr = chan->cosa->datareg;
d->irq = chan->cosa->irq;
d->dma = chan->cosa->dma;
- d->priv = chan;
+ d->ml_priv = chan;
sppp_attach(&chan->pppdev);
if (register_netdev(d)) {
printk(KERN_WARNING "%s: register_netdev failed.\n", d->name);
@@ -650,7 +650,7 @@
static int cosa_sppp_open(struct net_device *d)
{
- struct channel_data *chan = d->priv;
+ struct channel_data *chan = d->ml_priv;
int err;
unsigned long flags;
@@ -690,7 +690,7 @@
static int cosa_sppp_tx(struct sk_buff *skb, struct net_device *dev)
{
- struct channel_data *chan = dev->priv;
+ struct channel_data *chan = dev->ml_priv;
netif_stop_queue(dev);
@@ -701,7 +701,7 @@
static void cosa_sppp_timeout(struct net_device *dev)
{
- struct channel_data *chan = dev->priv;
+ struct channel_data *chan = dev->ml_priv;
if (test_bit(RXBIT, &chan->cosa->rxtx)) {
chan->stats.rx_errors++;
@@ -720,7 +720,7 @@
static int cosa_sppp_close(struct net_device *d)
{
- struct channel_data *chan = d->priv;
+ struct channel_data *chan = d->ml_priv;
unsigned long flags;
netif_stop_queue(d);
@@ -800,7 +800,7 @@
static struct net_device_stats *cosa_net_stats(struct net_device *dev)
{
- struct channel_data *chan = dev->priv;
+ struct channel_data *chan = dev->ml_priv;
return &chan->stats;
}
@@ -1217,7 +1217,7 @@
int cmd)
{
int rv;
- struct channel_data *chan = dev->priv;
+ struct channel_data *chan = dev->ml_priv;
rv = cosa_ioctl_common(chan->cosa, chan, cmd, (unsigned long)ifr->ifr_data);
if (rv == -ENOIOCTLCMD) {
return sppp_do_ioctl(dev, ifr, cmd);
diff --git a/drivers/net/wan/hdlc.c b/drivers/net/wan/hdlc.c
index 9a83c9d..7f98489 100644
--- a/drivers/net/wan/hdlc.c
+++ b/drivers/net/wan/hdlc.c
@@ -43,8 +43,7 @@
#undef DEBUG_LINK
-static struct hdlc_proto *first_proto = NULL;
-
+static struct hdlc_proto *first_proto;
static int hdlc_change_mtu(struct net_device *dev, int new_mtu)
{
@@ -314,21 +313,25 @@
void register_hdlc_protocol(struct hdlc_proto *proto)
{
+ rtnl_lock();
proto->next = first_proto;
first_proto = proto;
+ rtnl_unlock();
}
void unregister_hdlc_protocol(struct hdlc_proto *proto)
{
- struct hdlc_proto **p = &first_proto;
- while (*p) {
- if (*p == proto) {
- *p = proto->next;
- return;
- }
+ struct hdlc_proto **p;
+
+ rtnl_lock();
+ p = &first_proto;
+ while (*p != proto) {
+ BUG_ON(!*p);
p = &((*p)->next);
}
+ *p = proto->next;
+ rtnl_unlock();
}
diff --git a/drivers/net/wan/hdlc_cisco.c b/drivers/net/wan/hdlc_cisco.c
index 7133c68..762d21c 100644
--- a/drivers/net/wan/hdlc_cisco.c
+++ b/drivers/net/wan/hdlc_cisco.c
@@ -56,6 +56,7 @@
cisco_proto settings;
struct timer_list timer;
+ spinlock_t lock;
unsigned long last_poll;
int up;
int request_sent;
@@ -158,6 +159,7 @@
{
struct net_device *dev = skb->dev;
hdlc_device *hdlc = dev_to_hdlc(dev);
+ struct cisco_state *st = state(hdlc);
struct hdlc_header *data = (struct hdlc_header*)skb->data;
struct cisco_packet *cisco_data;
struct in_device *in_dev;
@@ -220,11 +222,12 @@
goto rx_error;
case CISCO_KEEPALIVE_REQ:
- state(hdlc)->rxseq = ntohl(cisco_data->par1);
- if (state(hdlc)->request_sent &&
- ntohl(cisco_data->par2) == state(hdlc)->txseq) {
- state(hdlc)->last_poll = jiffies;
- if (!state(hdlc)->up) {
+ spin_lock(&st->lock);
+ st->rxseq = ntohl(cisco_data->par1);
+ if (st->request_sent &&
+ ntohl(cisco_data->par2) == st->txseq) {
+ st->last_poll = jiffies;
+ if (!st->up) {
u32 sec, min, hrs, days;
sec = ntohl(cisco_data->time) / 1000;
min = sec / 60; sec -= min * 60;
@@ -232,12 +235,12 @@
days = hrs / 24; hrs -= days * 24;
printk(KERN_INFO "%s: Link up (peer "
"uptime %ud%uh%um%us)\n",
- dev->name, days, hrs,
- min, sec);
+ dev->name, days, hrs, min, sec);
netif_dormant_off(dev);
- state(hdlc)->up = 1;
+ st->up = 1;
}
}
+ spin_unlock(&st->lock);
dev_kfree_skb_any(skb);
return NET_RX_SUCCESS;
@@ -261,24 +264,25 @@
{
struct net_device *dev = (struct net_device *)arg;
hdlc_device *hdlc = dev_to_hdlc(dev);
+ struct cisco_state *st = state(hdlc);
- if (state(hdlc)->up &&
- time_after(jiffies, state(hdlc)->last_poll +
- state(hdlc)->settings.timeout * HZ)) {
- state(hdlc)->up = 0;
+ spin_lock(&st->lock);
+ if (st->up &&
+ time_after(jiffies, st->last_poll + st->settings.timeout * HZ)) {
+ st->up = 0;
printk(KERN_INFO "%s: Link down\n", dev->name);
netif_dormant_on(dev);
}
- cisco_keepalive_send(dev, CISCO_KEEPALIVE_REQ,
- htonl(++state(hdlc)->txseq),
- htonl(state(hdlc)->rxseq));
- state(hdlc)->request_sent = 1;
- state(hdlc)->timer.expires = jiffies +
- state(hdlc)->settings.interval * HZ;
- state(hdlc)->timer.function = cisco_timer;
- state(hdlc)->timer.data = arg;
- add_timer(&state(hdlc)->timer);
+ cisco_keepalive_send(dev, CISCO_KEEPALIVE_REQ, htonl(++st->txseq),
+ htonl(st->rxseq));
+ st->request_sent = 1;
+ spin_unlock(&st->lock);
+
+ st->timer.expires = jiffies + st->settings.interval * HZ;
+ st->timer.function = cisco_timer;
+ st->timer.data = arg;
+ add_timer(&st->timer);
}
@@ -286,15 +290,20 @@
static void cisco_start(struct net_device *dev)
{
hdlc_device *hdlc = dev_to_hdlc(dev);
- state(hdlc)->up = 0;
- state(hdlc)->request_sent = 0;
- state(hdlc)->txseq = state(hdlc)->rxseq = 0;
+ struct cisco_state *st = state(hdlc);
+ unsigned long flags;
- init_timer(&state(hdlc)->timer);
- state(hdlc)->timer.expires = jiffies + HZ; /*First poll after 1s*/
- state(hdlc)->timer.function = cisco_timer;
- state(hdlc)->timer.data = (unsigned long)dev;
- add_timer(&state(hdlc)->timer);
+ spin_lock_irqsave(&st->lock, flags);
+ st->up = 0;
+ st->request_sent = 0;
+ st->txseq = st->rxseq = 0;
+ spin_unlock_irqrestore(&st->lock, flags);
+
+ init_timer(&st->timer);
+ st->timer.expires = jiffies + HZ; /* First poll after 1 s */
+ st->timer.function = cisco_timer;
+ st->timer.data = (unsigned long)dev;
+ add_timer(&st->timer);
}
@@ -302,10 +311,16 @@
static void cisco_stop(struct net_device *dev)
{
hdlc_device *hdlc = dev_to_hdlc(dev);
- del_timer_sync(&state(hdlc)->timer);
+ struct cisco_state *st = state(hdlc);
+ unsigned long flags;
+
+ del_timer_sync(&st->timer);
+
+ spin_lock_irqsave(&st->lock, flags);
netif_dormant_on(dev);
- state(hdlc)->up = 0;
- state(hdlc)->request_sent = 0;
+ st->up = 0;
+ st->request_sent = 0;
+ spin_unlock_irqrestore(&st->lock, flags);
}
@@ -367,6 +382,7 @@
return result;
memcpy(&state(hdlc)->settings, &new_settings, size);
+ spin_lock_init(&state(hdlc)->lock);
dev->hard_start_xmit = hdlc->xmit;
dev->header_ops = &cisco_header_ops;
dev->type = ARPHRD_CISCO;
diff --git a/drivers/net/wan/hdlc_ppp.c b/drivers/net/wan/hdlc_ppp.c
index 10396d9..0030833 100644
--- a/drivers/net/wan/hdlc_ppp.c
+++ b/drivers/net/wan/hdlc_ppp.c
@@ -45,7 +45,7 @@
int (*old_ioctl)(struct net_device *, struct ifreq *, int);
int result;
- dev->priv = &state(hdlc)->syncppp_ptr;
+ dev->ml_priv = &state(hdlc)->syncppp_ptr;
state(hdlc)->syncppp_ptr = &state(hdlc)->pppdev;
state(hdlc)->pppdev.dev = dev;
diff --git a/drivers/net/wan/hostess_sv11.c b/drivers/net/wan/hostess_sv11.c
index 83dbc92..f3065d3 100644
--- a/drivers/net/wan/hostess_sv11.c
+++ b/drivers/net/wan/hostess_sv11.c
@@ -75,7 +75,7 @@
static int hostess_open(struct net_device *d)
{
- struct sv11_device *sv11=d->priv;
+ struct sv11_device *sv11=d->ml_priv;
int err = -1;
/*
@@ -128,7 +128,7 @@
static int hostess_close(struct net_device *d)
{
- struct sv11_device *sv11=d->priv;
+ struct sv11_device *sv11=d->ml_priv;
/*
* Discard new frames
*/
@@ -159,14 +159,14 @@
static int hostess_ioctl(struct net_device *d, struct ifreq *ifr, int cmd)
{
- /* struct sv11_device *sv11=d->priv;
+ /* struct sv11_device *sv11=d->ml_priv;
z8530_ioctl(d,&sv11->sync.chanA,ifr,cmd) */
return sppp_do_ioctl(d, ifr,cmd);
}
static struct net_device_stats *hostess_get_stats(struct net_device *d)
{
- struct sv11_device *sv11=d->priv;
+ struct sv11_device *sv11=d->ml_priv;
if(sv11)
return z8530_get_stats(&sv11->sync.chanA);
else
@@ -179,7 +179,7 @@
static int hostess_queue_xmit(struct sk_buff *skb, struct net_device *d)
{
- struct sv11_device *sv11=d->priv;
+ struct sv11_device *sv11=d->ml_priv;
return z8530_queue_xmit(&sv11->sync.chanA, skb);
}
@@ -325,6 +325,7 @@
/*
* Initialise the PPP components
*/
+ d->ml_priv = sv;
sppp_attach(&sv->netdev);
/*
@@ -333,7 +334,6 @@
d->base_addr = iobase;
d->irq = irq;
- d->priv = sv;
if(register_netdev(d))
{
diff --git a/drivers/net/wan/lmc/lmc_main.c b/drivers/net/wan/lmc/lmc_main.c
index 6635ece..62133ce 100644
--- a/drivers/net/wan/lmc/lmc_main.c
+++ b/drivers/net/wan/lmc/lmc_main.c
@@ -891,6 +891,7 @@
/* Initialize the sppp layer */
/* An ioctl can cause a subsequent detach for raw frame interface */
+ dev->ml_priv = sc;
sc->if_type = LMC_PPP;
sc->check = 0xBEAFCAFE;
dev->base_addr = pci_resource_start(pdev, 0);
diff --git a/drivers/net/wan/sealevel.c b/drivers/net/wan/sealevel.c
index 11276bf..44a89df 100644
--- a/drivers/net/wan/sealevel.c
+++ b/drivers/net/wan/sealevel.c
@@ -241,6 +241,7 @@
return NULL;
sv = d->priv;
+ d->ml_priv = sv;
sv->if_ptr = &sv->pppdev;
sv->pppdev.dev = d;
d->base_addr = iobase;
diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c
index 45f47c1..32019fb 100644
--- a/drivers/net/wireless/airo.c
+++ b/drivers/net/wireless/airo.c
@@ -2668,6 +2668,7 @@
dev->irq = ethdev->irq;
dev->base_addr = ethdev->base_addr;
dev->wireless_data = ethdev->wireless_data;
+ SET_NETDEV_DEV(dev, ethdev->dev.parent);
memcpy(dev->dev_addr, ethdev->dev_addr, dev->addr_len);
err = register_netdev(dev);
if (err<0) {
@@ -2904,7 +2905,7 @@
static int waitbusy (struct airo_info *ai) {
int delay = 0;
- while ((IN4500 (ai, COMMAND) & COMMAND_BUSY) & (delay < 10000)) {
+ while ((IN4500(ai, COMMAND) & COMMAND_BUSY) && (delay < 10000)) {
udelay (10);
if ((++delay % 20) == 0)
OUT4500(ai, EVACK, EV_CLEARCOMMANDBUSY);
diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c
index 4e5c8fc..635b9ac 100644
--- a/drivers/net/wireless/ath5k/base.c
+++ b/drivers/net/wireless/ath5k/base.c
@@ -1787,6 +1787,8 @@
spin_lock(&sc->rxbuflock);
do {
+ rxs.flag = 0;
+
if (unlikely(list_empty(&sc->rxbuf))) {
ATH5K_WARN(sc, "empty rx buf pool\n");
break;
diff --git a/drivers/net/wireless/ath5k/hw.c b/drivers/net/wireless/ath5k/hw.c
index 5fb1ae6..77990b5 100644
--- a/drivers/net/wireless/ath5k/hw.c
+++ b/drivers/net/wireless/ath5k/hw.c
@@ -4119,6 +4119,7 @@
rs->rs_tstamp = AR5K_REG_MS(rx_status->rx_status_1,
AR5K_5210_RX_DESC_STATUS1_RECEIVE_TIMESTAMP);
rs->rs_status = 0;
+ rs->rs_phyerr = 0;
/*
* Key table status
@@ -4145,7 +4146,7 @@
if (rx_status->rx_status_1 &
AR5K_5210_RX_DESC_STATUS1_PHY_ERROR) {
rs->rs_status |= AR5K_RXERR_PHY;
- rs->rs_phyerr = AR5K_REG_MS(rx_status->rx_status_1,
+ rs->rs_phyerr |= AR5K_REG_MS(rx_status->rx_status_1,
AR5K_5210_RX_DESC_STATUS1_PHY_ERROR);
}
@@ -4193,6 +4194,7 @@
rs->rs_tstamp = AR5K_REG_MS(rx_status->rx_status_1,
AR5K_5212_RX_DESC_STATUS1_RECEIVE_TIMESTAMP);
rs->rs_status = 0;
+ rs->rs_phyerr = 0;
/*
* Key table status
@@ -4215,7 +4217,7 @@
if (rx_status->rx_status_1 &
AR5K_5212_RX_DESC_STATUS1_PHY_ERROR) {
rs->rs_status |= AR5K_RXERR_PHY;
- rs->rs_phyerr = AR5K_REG_MS(rx_err->rx_error_1,
+ rs->rs_phyerr |= AR5K_REG_MS(rx_err->rx_error_1,
AR5K_RX_DESC_ERROR1_PHY_ERROR_CODE);
}
diff --git a/drivers/net/wireless/atmel.c b/drivers/net/wireless/atmel.c
index ef2da40..438e63e 100644
--- a/drivers/net/wireless/atmel.c
+++ b/drivers/net/wireless/atmel.c
@@ -47,6 +47,7 @@
#include <linux/string.h>
#include <linux/ctype.h>
#include <linux/timer.h>
+#include <asm/byteorder.h>
#include <asm/io.h>
#include <asm/system.h>
#include <asm/uaccess.h>
@@ -60,7 +61,6 @@
#include <linux/delay.h>
#include <linux/wireless.h>
#include <net/iw_handler.h>
-#include <linux/byteorder/generic.h>
#include <linux/crc32.h>
#include <linux/proc_fs.h>
#include <linux/device.h>
diff --git a/drivers/net/wireless/b43/Kconfig b/drivers/net/wireless/b43/Kconfig
index f51b2d9..1fa043d 100644
--- a/drivers/net/wireless/b43/Kconfig
+++ b/drivers/net/wireless/b43/Kconfig
@@ -1,6 +1,6 @@
config B43
tristate "Broadcom 43xx wireless support (mac80211 stack)"
- depends on SSB_POSSIBLE && MAC80211 && WLAN_80211
+ depends on SSB_POSSIBLE && MAC80211 && WLAN_80211 && HAS_DMA
select SSB
select FW_LOADER
select HW_RANDOM
diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h
index 37783cd..dfa4bdd 100644
--- a/drivers/net/wireless/b43/b43.h
+++ b/drivers/net/wireless/b43/b43.h
@@ -737,6 +737,7 @@
struct ieee80211_tx_control beacon_txctl;
bool beacon0_uploaded;
bool beacon1_uploaded;
+ bool beacon_templates_virgin; /* Never wrote the templates? */
struct work_struct beacon_update_trigger;
/* The current QOS parameters for the 4 queues.
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 8fdba94..6c3d9ea 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -1544,6 +1544,30 @@
kfree(probe_resp_data);
}
+static void b43_upload_beacon0(struct b43_wldev *dev)
+{
+ struct b43_wl *wl = dev->wl;
+
+ if (wl->beacon0_uploaded)
+ return;
+ b43_write_beacon_template(dev, 0x68, 0x18);
+ /* FIXME: Probe resp upload doesn't really belong here,
+ * but we don't use that feature anyway. */
+ b43_write_probe_resp_template(dev, 0x268, 0x4A,
+ &__b43_ratetable[3]);
+ wl->beacon0_uploaded = 1;
+}
+
+static void b43_upload_beacon1(struct b43_wldev *dev)
+{
+ struct b43_wl *wl = dev->wl;
+
+ if (wl->beacon1_uploaded)
+ return;
+ b43_write_beacon_template(dev, 0x468, 0x1A);
+ wl->beacon1_uploaded = 1;
+}
+
static void handle_irq_beacon(struct b43_wldev *dev)
{
struct b43_wl *wl = dev->wl;
@@ -1568,24 +1592,27 @@
return;
}
- if (!beacon0_valid) {
- if (!wl->beacon0_uploaded) {
- b43_write_beacon_template(dev, 0x68, 0x18);
- b43_write_probe_resp_template(dev, 0x268, 0x4A,
- &__b43_ratetable[3]);
- wl->beacon0_uploaded = 1;
- }
+ if (unlikely(wl->beacon_templates_virgin)) {
+ /* We never uploaded a beacon before.
+ * Upload both templates now, but only mark one valid. */
+ wl->beacon_templates_virgin = 0;
+ b43_upload_beacon0(dev);
+ b43_upload_beacon1(dev);
cmd = b43_read32(dev, B43_MMIO_MACCMD);
cmd |= B43_MACCMD_BEACON0_VALID;
b43_write32(dev, B43_MMIO_MACCMD, cmd);
- } else if (!beacon1_valid) {
- if (!wl->beacon1_uploaded) {
- b43_write_beacon_template(dev, 0x468, 0x1A);
- wl->beacon1_uploaded = 1;
+ } else {
+ if (!beacon0_valid) {
+ b43_upload_beacon0(dev);
+ cmd = b43_read32(dev, B43_MMIO_MACCMD);
+ cmd |= B43_MACCMD_BEACON0_VALID;
+ b43_write32(dev, B43_MMIO_MACCMD, cmd);
+ } else if (!beacon1_valid) {
+ b43_upload_beacon1(dev);
+ cmd = b43_read32(dev, B43_MMIO_MACCMD);
+ cmd |= B43_MACCMD_BEACON1_VALID;
+ b43_write32(dev, B43_MMIO_MACCMD, cmd);
}
- cmd = b43_read32(dev, B43_MMIO_MACCMD);
- cmd |= B43_MACCMD_BEACON1_VALID;
- b43_write32(dev, B43_MMIO_MACCMD, cmd);
}
}
@@ -4073,6 +4100,9 @@
wl->filter_flags = 0;
wl->radiotap_enabled = 0;
b43_qos_clear(wl);
+ wl->beacon0_uploaded = 0;
+ wl->beacon1_uploaded = 0;
+ wl->beacon_templates_virgin = 1;
/* First register RFkill.
* LEDs that are registered later depend on it. */
@@ -4241,7 +4271,9 @@
goto out;
}
}
- out:
+out:
+ if (err)
+ wl->current_dev = NULL; /* Failed to init the dev. */
mutex_unlock(&wl->mutex);
if (err)
b43err(wl, "Controller restart FAILED\n");
@@ -4382,9 +4414,11 @@
struct b43_wldev *wldev;
struct b43_wl *wl;
+ /* Do not cancel ieee80211-workqueue based work here.
+ * See comment in b43_remove(). */
+
wldev = ssb_get_drvdata(dev);
wl = wldev->wl;
- cancel_work_sync(&wldev->restart_work);
b43_debugfs_remove_device(wldev);
b43_wireless_core_detach(wldev);
list_del(&wldev->list);
@@ -4569,6 +4603,10 @@
struct b43_wl *wl = ssb_get_devtypedata(dev);
struct b43_wldev *wldev = ssb_get_drvdata(dev);
+ /* We must cancel any work here before unregistering from ieee80211,
+ * as the ieee80211 unreg will destroy the workqueue. */
+ cancel_work_sync(&wldev->restart_work);
+
B43_WARN_ON(!wl);
if (wl->current_dev == wldev)
ieee80211_unregister_hw(wl->hw);
diff --git a/drivers/net/wireless/b43legacy/Kconfig b/drivers/net/wireless/b43legacy/Kconfig
index 13c65fa..aef2298 100644
--- a/drivers/net/wireless/b43legacy/Kconfig
+++ b/drivers/net/wireless/b43legacy/Kconfig
@@ -1,6 +1,6 @@
config B43LEGACY
tristate "Broadcom 43xx-legacy wireless support (mac80211 stack)"
- depends on SSB_POSSIBLE && MAC80211 && WLAN_80211
+ depends on SSB_POSSIBLE && MAC80211 && WLAN_80211 && HAS_DMA
select SSB
select FW_LOADER
select HW_RANDOM
diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c
index 14a5eea..204077c 100644
--- a/drivers/net/wireless/b43legacy/main.c
+++ b/drivers/net/wireless/b43legacy/main.c
@@ -3039,7 +3039,6 @@
/* Locking: wl->mutex */
static void b43legacy_wireless_core_exit(struct b43legacy_wldev *dev)
{
- struct b43legacy_wl *wl = dev->wl;
struct b43legacy_phy *phy = &dev->phy;
u32 macctl;
@@ -3054,12 +3053,6 @@
macctl |= B43legacy_MACCTL_PSM_JMP0;
b43legacy_write32(dev, B43legacy_MMIO_MACCTL, macctl);
- mutex_unlock(&wl->mutex);
- /* Must unlock as it would otherwise deadlock. No races here.
- * Cancel possibly pending workqueues. */
- cancel_work_sync(&dev->restart_work);
- mutex_lock(&wl->mutex);
-
b43legacy_leds_exit(dev);
b43legacy_rng_exit(dev->wl);
b43legacy_pio_free(dev);
@@ -3486,6 +3479,8 @@
}
}
out:
+ if (err)
+ wl->current_dev = NULL; /* Failed to init the dev. */
mutex_unlock(&wl->mutex);
if (err)
b43legacyerr(wl, "Controller restart FAILED\n");
@@ -3618,9 +3613,11 @@
struct b43legacy_wldev *wldev;
struct b43legacy_wl *wl;
+ /* Do not cancel ieee80211-workqueue based work here.
+ * See comment in b43legacy_remove(). */
+
wldev = ssb_get_drvdata(dev);
wl = wldev->wl;
- cancel_work_sync(&wldev->restart_work);
b43legacy_debugfs_remove_device(wldev);
b43legacy_wireless_core_detach(wldev);
list_del(&wldev->list);
@@ -3789,6 +3786,10 @@
struct b43legacy_wl *wl = ssb_get_devtypedata(dev);
struct b43legacy_wldev *wldev = ssb_get_drvdata(dev);
+ /* We must cancel any work here before unregistering from ieee80211,
+ * as the ieee80211 unreg will destroy the workqueue. */
+ cancel_work_sync(&wldev->restart_work);
+
B43legacy_WARN_ON(!wl);
if (wl->current_dev == wldev)
ieee80211_unregister_hw(wl->hw);
diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c
index 437a9bc..ed4317a1 100644
--- a/drivers/net/wireless/hostap/hostap_cs.c
+++ b/drivers/net/wireless/hostap/hostap_cs.c
@@ -833,6 +833,7 @@
PCMCIA_DEVICE_MANF_CARD(0x50c2, 0x0001),
PCMCIA_DEVICE_MANF_CARD(0x50c2, 0x7300),
/* PCMCIA_DEVICE_MANF_CARD(0xc00f, 0x0000), conflict with pcnet_cs */
+ PCMCIA_DEVICE_MANF_CARD(0xc250, 0x0002),
PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0002),
PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0005),
PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0010),
diff --git a/drivers/net/wireless/hostap/hostap_hw.c b/drivers/net/wireless/hostap/hostap_hw.c
index 7be68db..cdf90c4 100644
--- a/drivers/net/wireless/hostap/hostap_hw.c
+++ b/drivers/net/wireless/hostap/hostap_hw.c
@@ -3276,11 +3276,6 @@
}
printk(KERN_INFO "%s: Registered netdevice %s\n", dev_info, dev->name);
-#ifndef PRISM2_NO_PROCFS_DEBUG
- create_proc_read_entry("registers", 0, local->proc,
- prism2_registers_proc_read, local);
-#endif /* PRISM2_NO_PROCFS_DEBUG */
-
hostap_init_data(local);
return dev;
@@ -3307,6 +3302,10 @@
netif_carrier_off(local->ddev);
}
hostap_init_proc(local);
+#ifndef PRISM2_NO_PROCFS_DEBUG
+ create_proc_read_entry("registers", 0, local->proc,
+ prism2_registers_proc_read, local);
+#endif /* PRISM2_NO_PROCFS_DEBUG */
hostap_init_ap_proc(local);
return 0;
}
diff --git a/drivers/net/wireless/hostap/hostap_main.c b/drivers/net/wireless/hostap/hostap_main.c
index 20d387f..f7aec93 100644
--- a/drivers/net/wireless/hostap/hostap_main.c
+++ b/drivers/net/wireless/hostap/hostap_main.c
@@ -682,7 +682,13 @@
netif_device_detach(dev);
}
- flush_scheduled_work();
+ cancel_work_sync(&local->reset_queue);
+ cancel_work_sync(&local->set_multicast_list_queue);
+ cancel_work_sync(&local->set_tim_queue);
+#ifndef PRISM2_NO_STATION_MODES
+ cancel_work_sync(&local->info_queue);
+#endif
+ cancel_work_sync(&local->comms_qual_update);
module_put(local->hw_module);
diff --git a/drivers/net/wireless/ipw2200.c b/drivers/net/wireless/ipw2200.c
index fa87c5c..6e70460 100644
--- a/drivers/net/wireless/ipw2200.c
+++ b/drivers/net/wireless/ipw2200.c
@@ -1753,6 +1753,8 @@
if (priv->workqueue) {
cancel_delayed_work(&priv->request_scan);
+ cancel_delayed_work(&priv->request_direct_scan);
+ cancel_delayed_work(&priv->request_passive_scan);
cancel_delayed_work(&priv->scan_event);
}
queue_work(priv->workqueue, &priv->down);
@@ -2005,6 +2007,8 @@
wake_up_interruptible(&priv->wait_command_queue);
priv->status &= ~(STATUS_ASSOCIATED | STATUS_ASSOCIATING);
cancel_delayed_work(&priv->request_scan);
+ cancel_delayed_work(&priv->request_direct_scan);
+ cancel_delayed_work(&priv->request_passive_scan);
cancel_delayed_work(&priv->scan_event);
schedule_work(&priv->link_down);
queue_delayed_work(priv->workqueue, &priv->rf_kill, 2 * HZ);
@@ -4712,6 +4716,12 @@
priv->status &= ~STATUS_SCAN_FORCED;
#endif /* CONFIG_IPW2200_MONITOR */
+ /* Do queued direct scans first */
+ if (priv->status & STATUS_DIRECT_SCAN_PENDING) {
+ queue_delayed_work(priv->workqueue,
+ &priv->request_direct_scan, 0);
+ }
+
if (!(priv->status & (STATUS_ASSOCIATED |
STATUS_ASSOCIATING |
STATUS_ROAMING |
@@ -6267,7 +6277,7 @@
}
}
-static int ipw_request_scan_helper(struct ipw_priv *priv, int type)
+static int ipw_request_scan_helper(struct ipw_priv *priv, int type, int direct)
{
struct ipw_scan_request_ext scan;
int err = 0, scan_type;
@@ -6278,22 +6288,31 @@
mutex_lock(&priv->mutex);
+ if (direct && (priv->direct_scan_ssid_len == 0)) {
+ IPW_DEBUG_HC("Direct scan requested but no SSID to scan for\n");
+ priv->status &= ~STATUS_DIRECT_SCAN_PENDING;
+ goto done;
+ }
+
if (priv->status & STATUS_SCANNING) {
- IPW_DEBUG_HC("Concurrent scan requested. Ignoring.\n");
- priv->status |= STATUS_SCAN_PENDING;
+ IPW_DEBUG_HC("Concurrent scan requested. Queuing.\n");
+ priv->status |= direct ? STATUS_DIRECT_SCAN_PENDING :
+ STATUS_SCAN_PENDING;
goto done;
}
if (!(priv->status & STATUS_SCAN_FORCED) &&
priv->status & STATUS_SCAN_ABORTING) {
IPW_DEBUG_HC("Scan request while abort pending. Queuing.\n");
- priv->status |= STATUS_SCAN_PENDING;
+ priv->status |= direct ? STATUS_DIRECT_SCAN_PENDING :
+ STATUS_SCAN_PENDING;
goto done;
}
if (priv->status & STATUS_RF_KILL_MASK) {
- IPW_DEBUG_HC("Aborting scan due to RF Kill activation\n");
- priv->status |= STATUS_SCAN_PENDING;
+ IPW_DEBUG_HC("Queuing scan due to RF Kill activation\n");
+ priv->status |= direct ? STATUS_DIRECT_SCAN_PENDING :
+ STATUS_SCAN_PENDING;
goto done;
}
@@ -6321,6 +6340,7 @@
cpu_to_le16(20);
scan.dwell_time[IPW_SCAN_PASSIVE_FULL_DWELL_SCAN] = cpu_to_le16(120);
+ scan.dwell_time[IPW_SCAN_ACTIVE_DIRECT_SCAN] = cpu_to_le16(20);
#ifdef CONFIG_IPW2200_MONITOR
if (priv->ieee->iw_mode == IW_MODE_MONITOR) {
@@ -6360,13 +6380,23 @@
cpu_to_le16(2000);
} else {
#endif /* CONFIG_IPW2200_MONITOR */
- /* If we are roaming, then make this a directed scan for the
- * current network. Otherwise, ensure that every other scan
- * is a fast channel hop scan */
- if ((priv->status & STATUS_ROAMING)
- || (!(priv->status & STATUS_ASSOCIATED)
- && (priv->config & CFG_STATIC_ESSID)
- && (le32_to_cpu(scan.full_scan_index) % 2))) {
+ /* Honor direct scans first, otherwise if we are roaming make
+ * this a direct scan for the current network. Finally,
+ * ensure that every other scan is a fast channel hop scan */
+ if (direct) {
+ err = ipw_send_ssid(priv, priv->direct_scan_ssid,
+ priv->direct_scan_ssid_len);
+ if (err) {
+ IPW_DEBUG_HC("Attempt to send SSID command "
+ "failed\n");
+ goto done;
+ }
+
+ scan_type = IPW_SCAN_ACTIVE_BROADCAST_AND_DIRECT_SCAN;
+ } else if ((priv->status & STATUS_ROAMING)
+ || (!(priv->status & STATUS_ASSOCIATED)
+ && (priv->config & CFG_STATIC_ESSID)
+ && (le32_to_cpu(scan.full_scan_index) % 2))) {
err = ipw_send_ssid(priv, priv->essid, priv->essid_len);
if (err) {
IPW_DEBUG_HC("Attempt to send SSID command "
@@ -6391,7 +6421,12 @@
}
priv->status |= STATUS_SCANNING;
- priv->status &= ~STATUS_SCAN_PENDING;
+ if (direct) {
+ priv->status &= ~STATUS_DIRECT_SCAN_PENDING;
+ priv->direct_scan_ssid_len = 0;
+ } else
+ priv->status &= ~STATUS_SCAN_PENDING;
+
queue_delayed_work(priv->workqueue, &priv->scan_check,
IPW_SCAN_CHECK_WATCHDOG);
done:
@@ -6402,15 +6437,22 @@
static void ipw_request_passive_scan(struct work_struct *work)
{
struct ipw_priv *priv =
- container_of(work, struct ipw_priv, request_passive_scan);
- ipw_request_scan_helper(priv, IW_SCAN_TYPE_PASSIVE);
+ container_of(work, struct ipw_priv, request_passive_scan.work);
+ ipw_request_scan_helper(priv, IW_SCAN_TYPE_PASSIVE, 0);
}
static void ipw_request_scan(struct work_struct *work)
{
struct ipw_priv *priv =
container_of(work, struct ipw_priv, request_scan.work);
- ipw_request_scan_helper(priv, IW_SCAN_TYPE_ACTIVE);
+ ipw_request_scan_helper(priv, IW_SCAN_TYPE_ACTIVE, 0);
+}
+
+static void ipw_request_direct_scan(struct work_struct *work)
+{
+ struct ipw_priv *priv =
+ container_of(work, struct ipw_priv, request_direct_scan.work);
+ ipw_request_scan_helper(priv, IW_SCAN_TYPE_ACTIVE, 1);
}
static void ipw_bg_abort_scan(struct work_struct *work)
@@ -7558,8 +7600,31 @@
priv->ieee->iw_mode == IW_MODE_ADHOC &&
priv->config & CFG_ADHOC_CREATE &&
priv->config & CFG_STATIC_ESSID &&
- priv->config & CFG_STATIC_CHANNEL &&
- !list_empty(&priv->ieee->network_free_list)) {
+ priv->config & CFG_STATIC_CHANNEL) {
+ /* Use oldest network if the free list is empty */
+ if (list_empty(&priv->ieee->network_free_list)) {
+ struct ieee80211_network *oldest = NULL;
+ struct ieee80211_network *target;
+ DECLARE_MAC_BUF(mac);
+
+ list_for_each_entry(target, &priv->ieee->network_list, list) {
+ if ((oldest == NULL) ||
+ (target->last_scanned < oldest->last_scanned))
+ oldest = target;
+ }
+
+ /* If there are no more slots, expire the oldest */
+ list_del(&oldest->list);
+ target = oldest;
+ IPW_DEBUG_ASSOC("Expired '%s' (%s) from "
+ "network list.\n",
+ escape_essid(target->ssid,
+ target->ssid_len),
+ print_mac(mac, target->bssid));
+ list_add_tail(&target->list,
+ &priv->ieee->network_free_list);
+ }
+
element = priv->ieee->network_free_list.next;
network = list_entry(element, struct ieee80211_network, list);
ipw_adhoc_create(priv, network);
@@ -9454,99 +9519,38 @@
return 0;
}
-static int ipw_request_direct_scan(struct ipw_priv *priv, char *essid,
- int essid_len)
-{
- struct ipw_scan_request_ext scan;
- int err = 0, scan_type;
-
- if (!(priv->status & STATUS_INIT) ||
- (priv->status & STATUS_EXIT_PENDING))
- return 0;
-
- mutex_lock(&priv->mutex);
-
- if (priv->status & STATUS_RF_KILL_MASK) {
- IPW_DEBUG_HC("Aborting scan due to RF kill activation\n");
- priv->status |= STATUS_SCAN_PENDING;
- goto done;
- }
-
- IPW_DEBUG_HC("starting request direct scan!\n");
-
- if (priv->status & (STATUS_SCANNING | STATUS_SCAN_ABORTING)) {
- /* We should not sleep here; otherwise we will block most
- * of the system (for instance, we hold rtnl_lock when we
- * get here).
- */
- err = -EAGAIN;
- goto done;
- }
- memset(&scan, 0, sizeof(scan));
-
- if (priv->config & CFG_SPEED_SCAN)
- scan.dwell_time[IPW_SCAN_ACTIVE_BROADCAST_SCAN] =
- cpu_to_le16(30);
- else
- scan.dwell_time[IPW_SCAN_ACTIVE_BROADCAST_SCAN] =
- cpu_to_le16(20);
-
- scan.dwell_time[IPW_SCAN_ACTIVE_BROADCAST_AND_DIRECT_SCAN] =
- cpu_to_le16(20);
- scan.dwell_time[IPW_SCAN_PASSIVE_FULL_DWELL_SCAN] = cpu_to_le16(120);
- scan.dwell_time[IPW_SCAN_ACTIVE_DIRECT_SCAN] = cpu_to_le16(20);
-
- scan.full_scan_index = cpu_to_le32(ieee80211_get_scans(priv->ieee));
-
- err = ipw_send_ssid(priv, essid, essid_len);
- if (err) {
- IPW_DEBUG_HC("Attempt to send SSID command failed\n");
- goto done;
- }
- scan_type = IPW_SCAN_ACTIVE_BROADCAST_AND_DIRECT_SCAN;
-
- ipw_add_scan_channels(priv, &scan, scan_type);
-
- err = ipw_send_scan_request_ext(priv, &scan);
- if (err) {
- IPW_DEBUG_HC("Sending scan command failed: %08X\n", err);
- goto done;
- }
-
- priv->status |= STATUS_SCANNING;
-
- done:
- mutex_unlock(&priv->mutex);
- return err;
-}
-
static int ipw_wx_set_scan(struct net_device *dev,
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra)
{
struct ipw_priv *priv = ieee80211_priv(dev);
struct iw_scan_req *req = (struct iw_scan_req *)extra;
+ struct delayed_work *work = NULL;
mutex_lock(&priv->mutex);
+
priv->user_requested_scan = 1;
- mutex_unlock(&priv->mutex);
if (wrqu->data.length == sizeof(struct iw_scan_req)) {
if (wrqu->data.flags & IW_SCAN_THIS_ESSID) {
- ipw_request_direct_scan(priv, req->essid,
- req->essid_len);
- return 0;
+ int len = min((int)req->essid_len,
+ (int)sizeof(priv->direct_scan_ssid));
+ memcpy(priv->direct_scan_ssid, req->essid, len);
+ priv->direct_scan_ssid_len = len;
+ work = &priv->request_direct_scan;
+ } else if (req->scan_type == IW_SCAN_TYPE_PASSIVE) {
+ work = &priv->request_passive_scan;
}
- if (req->scan_type == IW_SCAN_TYPE_PASSIVE) {
- queue_work(priv->workqueue,
- &priv->request_passive_scan);
- return 0;
- }
+ } else {
+ /* Normal active broadcast scan */
+ work = &priv->request_scan;
}
+ mutex_unlock(&priv->mutex);
+
IPW_DEBUG_WX("Start scan\n");
- queue_delayed_work(priv->workqueue, &priv->request_scan, 0);
+ queue_delayed_work(priv->workqueue, work, 0);
return 0;
}
@@ -10708,6 +10712,8 @@
}
cancel_delayed_work(&priv->request_scan);
+ cancel_delayed_work(&priv->request_direct_scan);
+ cancel_delayed_work(&priv->request_passive_scan);
cancel_delayed_work(&priv->scan_event);
ipw_reset_stats(priv);
/* Ensure the rate is updated immediately */
@@ -10738,6 +10744,8 @@
/* Cancel any queued work ... */
cancel_delayed_work(&priv->request_scan);
+ cancel_delayed_work(&priv->request_direct_scan);
+ cancel_delayed_work(&priv->request_passive_scan);
cancel_delayed_work(&priv->adhoc_check);
cancel_delayed_work(&priv->gather_stats);
@@ -10777,8 +10785,9 @@
INIT_WORK(&priv->up, ipw_bg_up);
INIT_WORK(&priv->down, ipw_bg_down);
INIT_DELAYED_WORK(&priv->request_scan, ipw_request_scan);
+ INIT_DELAYED_WORK(&priv->request_direct_scan, ipw_request_direct_scan);
+ INIT_DELAYED_WORK(&priv->request_passive_scan, ipw_request_passive_scan);
INIT_DELAYED_WORK(&priv->scan_event, ipw_scan_event);
- INIT_WORK(&priv->request_passive_scan, ipw_request_passive_scan);
INIT_DELAYED_WORK(&priv->gather_stats, ipw_bg_gather_stats);
INIT_WORK(&priv->abort_scan, ipw_bg_abort_scan);
INIT_WORK(&priv->roam, ipw_bg_roam);
@@ -11584,6 +11593,7 @@
priv->prom_net_dev->hard_start_xmit = ipw_prom_hard_start_xmit;
priv->prom_priv->ieee->iw_mode = IW_MODE_MONITOR;
+ SET_NETDEV_DEV(priv->prom_net_dev, &priv->pci_dev->dev);
rc = register_netdev(priv->prom_net_dev);
if (rc) {
@@ -11811,6 +11821,8 @@
cancel_delayed_work(&priv->adhoc_check);
cancel_delayed_work(&priv->gather_stats);
cancel_delayed_work(&priv->request_scan);
+ cancel_delayed_work(&priv->request_direct_scan);
+ cancel_delayed_work(&priv->request_passive_scan);
cancel_delayed_work(&priv->scan_event);
cancel_delayed_work(&priv->rf_kill);
cancel_delayed_work(&priv->scan_check);
diff --git a/drivers/net/wireless/ipw2200.h b/drivers/net/wireless/ipw2200.h
index cd3295b..d4ab28b 100644
--- a/drivers/net/wireless/ipw2200.h
+++ b/drivers/net/wireless/ipw2200.h
@@ -1037,6 +1037,7 @@
#define STATUS_DISASSOC_PENDING (1<<12)
#define STATUS_STATE_PENDING (1<<13)
+#define STATUS_DIRECT_SCAN_PENDING (1<<19)
#define STATUS_SCAN_PENDING (1<<20)
#define STATUS_SCANNING (1<<21)
#define STATUS_SCAN_ABORTING (1<<22)
@@ -1292,6 +1293,8 @@
struct iw_public_data wireless_data;
int user_requested_scan;
+ u8 direct_scan_ssid[IW_ESSID_MAX_SIZE];
+ u8 direct_scan_ssid_len;
struct workqueue_struct *workqueue;
@@ -1301,8 +1304,9 @@
struct work_struct system_config;
struct work_struct rx_replenish;
struct delayed_work request_scan;
+ struct delayed_work request_direct_scan;
+ struct delayed_work request_passive_scan;
struct delayed_work scan_event;
- struct work_struct request_passive_scan;
struct work_struct adapter_restart;
struct delayed_work rf_kill;
struct work_struct up;
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-led.c b/drivers/net/wireless/iwlwifi/iwl-3945-led.c
index d200d08..8b1528e 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945-led.c
+++ b/drivers/net/wireless/iwlwifi/iwl-3945-led.c
@@ -229,14 +229,15 @@
led->led_dev.brightness_set = iwl3945_led_brightness_set;
led->led_dev.default_trigger = trigger;
+ led->priv = priv;
+ led->type = type;
+
ret = led_classdev_register(device, &led->led_dev);
if (ret) {
IWL_ERROR("Error: failed to register led handler.\n");
return ret;
}
- led->priv = priv;
- led->type = type;
led->registered = 1;
if (set_led && led->led_on)
diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c
index d340683..62a3d8f 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945.c
+++ b/drivers/net/wireless/iwlwifi/iwl-3945.c
@@ -666,7 +666,7 @@
rx_status.flag = 0;
rx_status.mactime = le64_to_cpu(rx_end->timestamp);
rx_status.freq =
- ieee80211_frequency_to_channel(le16_to_cpu(rx_hdr->channel));
+ ieee80211_channel_to_frequency(le16_to_cpu(rx_hdr->channel));
rx_status.band = (rx_hdr->phy_flags & RX_RES_PHY_FLAGS_BAND_24_MSK) ?
IEEE80211_BAND_2GHZ : IEEE80211_BAND_5GHZ;
diff --git a/drivers/net/wireless/iwlwifi/iwl-4965-rs.c b/drivers/net/wireless/iwlwifi/iwl-4965-rs.c
index b608e1c..3a7f0cb 100644
--- a/drivers/net/wireless/iwlwifi/iwl-4965-rs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-4965-rs.c
@@ -163,8 +163,8 @@
struct dentry *rs_sta_dbgfs_tx_agg_tid_en_file;
#endif
struct iwl4965_rate dbg_fixed;
- struct iwl_priv *drv;
#endif
+ struct iwl_priv *drv;
};
static void rs_rate_scale_perform(struct iwl_priv *priv,
@@ -1162,7 +1162,6 @@
/* Higher rate not available, use the original */
} else {
- new_rate = rate;
break;
}
}
@@ -2009,7 +2008,7 @@
* 2) Not just finishing up a search
* 3) Allowing a new search
*/
- if (!update_lq && !done_search && !lq_sta->stay_in_tbl) {
+ if (!update_lq && !done_search && !lq_sta->stay_in_tbl && window->counter) {
/* Save current throughput to compare with "search" throughput*/
lq_sta->last_tpt = current_tpt;
diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c
index 17f629f..bf19eb8 100644
--- a/drivers/net/wireless/iwlwifi/iwl-4965.c
+++ b/drivers/net/wireless/iwlwifi/iwl-4965.c
@@ -3978,7 +3978,7 @@
rx_status.mactime = le64_to_cpu(rx_start->timestamp);
rx_status.freq =
- ieee80211_frequency_to_channel(le16_to_cpu(rx_start->channel));
+ ieee80211_channel_to_frequency(le16_to_cpu(rx_start->channel));
rx_status.band = (rx_start->phy_flags & RX_RES_PHY_FLAGS_BAND_24_MSK) ?
IEEE80211_BAND_2GHZ : IEEE80211_BAND_5GHZ;
rx_status.rate_idx =
diff --git a/drivers/net/wireless/libertas/cmd.c b/drivers/net/wireless/libertas/cmd.c
index 6328b95..8124fd9 100644
--- a/drivers/net/wireless/libertas/cmd.c
+++ b/drivers/net/wireless/libertas/cmd.c
@@ -1842,6 +1842,9 @@
spin_lock_irqsave(&priv->driver_lock, flags);
+ /* We don't get a response on the sleep-confirmation */
+ priv->dnld_sent = DNLD_RES_RECEIVED;
+
/* If nothing to do, go back to sleep (?) */
if (!__kfifo_len(priv->event_fifo) && !priv->resp_len[priv->resp_idx])
priv->psstate = PS_STATE_SLEEP;
@@ -1904,12 +1907,12 @@
lbs_deb_enter(LBS_DEB_HOST);
+ spin_lock_irqsave(&priv->driver_lock, flags);
if (priv->dnld_sent) {
allowed = 0;
lbs_deb_host("dnld_sent was set\n");
}
- spin_lock_irqsave(&priv->driver_lock, flags);
/* In-progress command? */
if (priv->cur_cmd) {
allowed = 0;
diff --git a/drivers/net/wireless/libertas/debugfs.c b/drivers/net/wireless/libertas/debugfs.c
index ad2fabc..0aa0ce3 100644
--- a/drivers/net/wireless/libertas/debugfs.c
+++ b/drivers/net/wireless/libertas/debugfs.c
@@ -312,8 +312,8 @@
if (tlv_type != TLV_TYPE_BCNMISS)
tlv->freq = freq;
- /* The command header, the event mask, and the one TLV */
- events->hdr.size = cpu_to_le16(sizeof(events->hdr) + 2 + sizeof(*tlv));
+ /* The command header, the action, the event mask, and one TLV */
+ events->hdr.size = cpu_to_le16(sizeof(events->hdr) + 4 + sizeof(*tlv));
ret = lbs_cmd_with_response(priv, CMD_802_11_SUBSCRIBE_EVENT, events);
diff --git a/drivers/net/wireless/libertas/ethtool.c b/drivers/net/wireless/libertas/ethtool.c
index dcfdb40..688d60d 100644
--- a/drivers/net/wireless/libertas/ethtool.c
+++ b/drivers/net/wireless/libertas/ethtool.c
@@ -73,8 +73,8 @@
return ret;
}
-static void lbs_ethtool_get_stats(struct net_device * dev,
- struct ethtool_stats * stats, u64 * data)
+static void lbs_ethtool_get_stats(struct net_device *dev,
+ struct ethtool_stats *stats, uint64_t *data)
{
struct lbs_private *priv = dev->priv;
struct cmd_ds_mesh_access mesh_access;
@@ -83,12 +83,12 @@
lbs_deb_enter(LBS_DEB_ETHTOOL);
/* Get Mesh Statistics */
- ret = lbs_prepare_and_send_command(priv,
- CMD_MESH_ACCESS, CMD_ACT_MESH_GET_STATS,
- CMD_OPTION_WAITFORRSP, 0, &mesh_access);
+ ret = lbs_mesh_access(priv, CMD_ACT_MESH_GET_STATS, &mesh_access);
- if (ret)
+ if (ret) {
+ memset(data, 0, MESH_STATS_NUM*(sizeof(uint64_t)));
return;
+ }
priv->mstats.fwd_drop_rbt = le32_to_cpu(mesh_access.data[0]);
priv->mstats.fwd_drop_ttl = le32_to_cpu(mesh_access.data[1]);
@@ -111,19 +111,18 @@
lbs_deb_enter(LBS_DEB_ETHTOOL);
}
-static int lbs_ethtool_get_sset_count(struct net_device * dev, int sset)
+static int lbs_ethtool_get_sset_count(struct net_device *dev, int sset)
{
- switch (sset) {
- case ETH_SS_STATS:
+ struct lbs_private *priv = dev->priv;
+
+ if (sset == ETH_SS_STATS && dev == priv->mesh_dev)
return MESH_STATS_NUM;
- default:
- return -EOPNOTSUPP;
- }
+
+ return -EOPNOTSUPP;
}
static void lbs_ethtool_get_strings(struct net_device *dev,
- u32 stringset,
- u8 * s)
+ uint32_t stringset, uint8_t *s)
{
int i;
diff --git a/drivers/net/wireless/libertas/main.c b/drivers/net/wireless/libertas/main.c
index 406f54d..acfc4bf 100644
--- a/drivers/net/wireless/libertas/main.c
+++ b/drivers/net/wireless/libertas/main.c
@@ -732,8 +732,8 @@
lbs_deb_thread("4: currenttxskb %p, dnld_sent %d\n",
priv->currenttxskb, priv->dnld_sent);
- spin_lock_irq(&priv->driver_lock);
/* Process any pending command response */
+ spin_lock_irq(&priv->driver_lock);
resp_idx = priv->resp_idx;
if (priv->resp_len[resp_idx]) {
spin_unlock_irq(&priv->driver_lock);
@@ -756,6 +756,7 @@
priv->nr_retries = 0;
} else {
priv->cur_cmd = NULL;
+ priv->dnld_sent = DNLD_RES_RECEIVED;
lbs_pr_info("requeueing command %x due to timeout (#%d)\n",
le16_to_cpu(cmdnode->cmdbuf->command), priv->nr_retries);
@@ -1564,6 +1565,7 @@
rtap_dev->hard_start_xmit = lbs_rtap_hard_start_xmit;
rtap_dev->set_multicast_list = lbs_set_multicast_list;
rtap_dev->priv = priv;
+ SET_NETDEV_DEV(rtap_dev, priv->dev->dev.parent);
ret = register_netdev(rtap_dev);
if (ret) {
diff --git a/drivers/net/wireless/orinoco_cs.c b/drivers/net/wireless/orinoco_cs.c
index 8b7f576..1c216e0 100644
--- a/drivers/net/wireless/orinoco_cs.c
+++ b/drivers/net/wireless/orinoco_cs.c
@@ -461,6 +461,7 @@
PCMCIA_DEVICE_MANF_CARD(0x028a, 0x0673), /* Linksys WCF12 Wireless CompactFlash Card */
PCMCIA_DEVICE_MANF_CARD(0x02aa, 0x0002), /* ASUS SpaceLink WL-100 */
PCMCIA_DEVICE_MANF_CARD(0x02ac, 0x0002), /* SpeedStream SS1021 Wireless Adapter */
+ PCMCIA_DEVICE_MANF_CARD(0x02ac, 0x3021), /* SpeedStream Wireless Adapter */
PCMCIA_DEVICE_MANF_CARD(0x14ea, 0xb001), /* PLANEX RoadLannerWave GW-NS11H */
PCMCIA_DEVICE_MANF_CARD(0x50c2, 0x7300), /* Airvast WN-100 */
PCMCIA_DEVICE_MANF_CARD(0x9005, 0x0021), /* Adaptec Ultra Wireless ANW-8030 */
diff --git a/drivers/net/wireless/p54/p54usb.c b/drivers/net/wireless/p54/p54usb.c
index 98ddbb3..1610a730 100644
--- a/drivers/net/wireless/p54/p54usb.c
+++ b/drivers/net/wireless/p54/p54usb.c
@@ -49,6 +49,7 @@
{USB_DEVICE(0x5041, 0x2235)}, /* Linksys WUSB54G Portable */
/* Version 2 devices (3887) */
+ {USB_DEVICE(0x0471, 0x1230)}, /* Philips CPWUA054/00 */
{USB_DEVICE(0x050d, 0x7050)}, /* Belkin F5D7050 ver 1000 */
{USB_DEVICE(0x0572, 0x2000)}, /* Cohiba Proto board */
{USB_DEVICE(0x0572, 0x2002)}, /* Cohiba Proto board */
diff --git a/drivers/net/wireless/prism54/islpci_dev.c b/drivers/net/wireless/prism54/islpci_dev.c
index 04c2638..9196825 100644
--- a/drivers/net/wireless/prism54/islpci_dev.c
+++ b/drivers/net/wireless/prism54/islpci_dev.c
@@ -388,8 +388,15 @@
netif_start_queue(ndev);
- /* Turn off carrier unless we know we have associated */
- netif_carrier_off(ndev);
+ /* Turn off carrier if in STA or Ad-hoc mode. It will be turned on
+ * once the firmware receives a trap of being associated
+ * (GEN_OID_LINKSTATE). In other modes (AP or WDS or monitor) we
+ * should just leave the carrier on as its expected the firmware
+ * won't send us a trigger. */
+ if (priv->iw_mode == IW_MODE_INFRA || priv->iw_mode == IW_MODE_ADHOC)
+ netif_carrier_off(ndev);
+ else
+ netif_carrier_on(ndev);
return 0;
}
diff --git a/drivers/net/wireless/rndis_wlan.c b/drivers/net/wireless/rndis_wlan.c
index d0b1fb1..18c9931 100644
--- a/drivers/net/wireless/rndis_wlan.c
+++ b/drivers/net/wireless/rndis_wlan.c
@@ -116,6 +116,7 @@
#define OID_802_11_ENCRYPTION_STATUS ccpu2(0x0d01011b)
#define OID_802_11_ADD_KEY ccpu2(0x0d01011d)
#define OID_802_11_REMOVE_KEY ccpu2(0x0d01011e)
+#define OID_802_11_ASSOCIATION_INFORMATION ccpu2(0x0d01011f)
#define OID_802_11_PMKID ccpu2(0x0d010123)
#define OID_802_11_NETWORK_TYPES_SUPPORTED ccpu2(0x0d010203)
#define OID_802_11_NETWORK_TYPE_IN_USE ccpu2(0x0d010204)
@@ -271,6 +272,26 @@
__le32 value_length;
} __attribute__((packed));
+struct ndis_80211_assoc_info {
+ __le32 length;
+ __le16 req_ies;
+ struct req_ie {
+ __le16 capa;
+ __le16 listen_interval;
+ u8 cur_ap_address[6];
+ } req_ie;
+ __le32 req_ie_length;
+ __le32 offset_req_ies;
+ __le16 resp_ies;
+ struct resp_ie {
+ __le16 capa;
+ __le16 status_code;
+ __le16 assoc_id;
+ } resp_ie;
+ __le32 resp_ie_length;
+ __le32 offset_resp_ies;
+} __attribute__((packed));
+
/* these have to match what is in wpa_supplicant */
enum wpa_alg { WPA_ALG_NONE, WPA_ALG_WEP, WPA_ALG_TKIP, WPA_ALG_CCMP };
enum wpa_cipher { CIPHER_NONE, CIPHER_WEP40, CIPHER_TKIP, CIPHER_CCMP,
@@ -674,6 +695,12 @@
return ret;
}
+static int get_association_info(struct usbnet *usbdev,
+ struct ndis_80211_assoc_info *info, int len)
+{
+ return rndis_query_oid(usbdev, OID_802_11_ASSOCIATION_INFORMATION,
+ info, &len);
+}
static int is_associated(struct usbnet *usbdev)
{
@@ -2182,11 +2209,40 @@
struct usbnet *usbdev = priv->usbdev;
union iwreq_data evt;
unsigned char bssid[ETH_ALEN];
- int ret;
+ struct ndis_80211_assoc_info *info;
+ int assoc_size = sizeof(*info) + IW_CUSTOM_MAX + 32;
+ int ret, offset;
if (test_and_clear_bit(WORK_CONNECTION_EVENT, &priv->work_pending)) {
- ret = get_bssid(usbdev, bssid);
+ info = kzalloc(assoc_size, GFP_KERNEL);
+ if (!info)
+ goto get_bssid;
+ /* Get association info IEs from device and send them back to
+ * userspace. */
+ ret = get_association_info(usbdev, info, assoc_size);
+ if (!ret) {
+ evt.data.length = le32_to_cpu(info->req_ie_length);
+ if (evt.data.length > 0) {
+ offset = le32_to_cpu(info->offset_req_ies);
+ wireless_send_event(usbdev->net,
+ IWEVASSOCREQIE, &evt,
+ (char *)info + offset);
+ }
+
+ evt.data.length = le32_to_cpu(info->resp_ie_length);
+ if (evt.data.length > 0) {
+ offset = le32_to_cpu(info->offset_resp_ies);
+ wireless_send_event(usbdev->net,
+ IWEVASSOCRESPIE, &evt,
+ (char *)info + offset);
+ }
+ }
+
+ kfree(info);
+
+get_bssid:
+ ret = get_bssid(usbdev, bssid);
if (!ret) {
evt.data.flags = 0;
evt.data.length = 0;
@@ -2414,6 +2470,11 @@
else if (priv->param_power_save > 2)
priv->param_power_save = 2;
+ if (priv->param_power_output < 0)
+ priv->param_power_output = 0;
+ else if (priv->param_power_output > 3)
+ priv->param_power_output = 3;
+
if (priv->param_roamtrigger < -80)
priv->param_roamtrigger = -80;
else if (priv->param_roamtrigger > -60)
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index 57bdc15..611d983 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -328,6 +328,11 @@
return DEFAULT_RSSI;
}
+static inline void rt2x00_reset_link_ant_rssi(struct link *link)
+{
+ link->ant.rssi_ant = 0;
+}
+
static inline int rt2x00_get_link_ant_rssi_history(struct link *link,
enum antenna ant)
{
diff --git a/drivers/net/wireless/rt2x00/rt2x00config.c b/drivers/net/wireless/rt2x00/rt2x00config.c
index a9930a0..48608e8 100644
--- a/drivers/net/wireless/rt2x00/rt2x00config.c
+++ b/drivers/net/wireless/rt2x00/rt2x00config.c
@@ -129,6 +129,7 @@
*/
rt2x00dev->ops->lib->config(rt2x00dev, &libconf, CONFIG_UPDATE_ANTENNA);
rt2x00lib_reset_link_tuner(rt2x00dev);
+ rt2x00_reset_link_ant_rssi(&rt2x00dev->link);
rt2x00dev->link.ant.active.rx = libconf.ant.rx;
rt2x00dev->link.ant.active.tx = libconf.ant.tx;
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index 8d8657f..2673d56 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -483,9 +483,9 @@
if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags))
return;
- ieee80211_iterate_active_interfaces(rt2x00dev->hw,
- rt2x00lib_beacondone_iter,
- rt2x00dev);
+ ieee80211_iterate_active_interfaces_atomic(rt2x00dev->hw,
+ rt2x00lib_beacondone_iter,
+ rt2x00dev);
queue_work(rt2x00dev->hw->workqueue, &rt2x00dev->intf_work);
}
@@ -507,7 +507,7 @@
* Update TX statistics.
*/
rt2x00dev->link.qual.tx_success += success;
- rt2x00dev->link.qual.tx_failed += txdesc->retry + fail;
+ rt2x00dev->link.qual.tx_failed += fail;
/*
* Initialize TX status
@@ -1032,8 +1032,10 @@
* Initialize the device.
*/
status = rt2x00dev->ops->lib->initialize(rt2x00dev);
- if (status)
- goto exit;
+ if (status) {
+ rt2x00queue_uninitialize(rt2x00dev);
+ return status;
+ }
__set_bit(DEVICE_INITIALIZED, &rt2x00dev->flags);
@@ -1043,11 +1045,6 @@
rt2x00rfkill_register(rt2x00dev);
return 0;
-
-exit:
- rt2x00lib_uninitialize(rt2x00dev);
-
- return status;
}
int rt2x00lib_start(struct rt2x00_dev *rt2x00dev)
diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c
index c206b50..87e280a 100644
--- a/drivers/net/wireless/rt2x00/rt2x00mac.c
+++ b/drivers/net/wireless/rt2x00/rt2x00mac.c
@@ -93,6 +93,7 @@
*/
if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags)) {
ieee80211_stop_queues(hw);
+ dev_kfree_skb_any(skb);
return NETDEV_TX_OK;
}
diff --git a/drivers/net/wireless/rt2x00/rt2x00pci.c b/drivers/net/wireless/rt2x00/rt2x00pci.c
index 7867ec6..971af25 100644
--- a/drivers/net/wireless/rt2x00/rt2x00pci.c
+++ b/drivers/net/wireless/rt2x00/rt2x00pci.c
@@ -314,13 +314,14 @@
if (status) {
ERROR(rt2x00dev, "IRQ %d allocation failed (error %d).\n",
pci_dev->irq, status);
- return status;
+ goto exit;
}
return 0;
exit:
- rt2x00pci_uninitialize(rt2x00dev);
+ queue_for_each(rt2x00dev, queue)
+ rt2x00pci_free_queue_dma(rt2x00dev, queue);
return status;
}
diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c
index ae12dcd..14bc7b2 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.c
+++ b/drivers/net/wireless/rt2x00/rt61pci.c
@@ -2366,6 +2366,7 @@
{
struct rt2x00_dev *rt2x00dev = hw->priv;
struct rt2x00_intf *intf = vif_to_intf(control->vif);
+ struct queue_entry_priv_pci_tx *priv_tx;
struct skb_frame_desc *skbdesc;
unsigned int beacon_base;
u32 reg;
@@ -2373,21 +2374,8 @@
if (unlikely(!intf->beacon))
return -ENOBUFS;
- /*
- * We need to append the descriptor in front of the
- * beacon frame.
- */
- if (skb_headroom(skb) < intf->beacon->queue->desc_size) {
- if (pskb_expand_head(skb, intf->beacon->queue->desc_size,
- 0, GFP_ATOMIC))
- return -ENOMEM;
- }
-
- /*
- * Add the descriptor in front of the skb.
- */
- skb_push(skb, intf->beacon->queue->desc_size);
- memset(skb->data, 0, intf->beacon->queue->desc_size);
+ priv_tx = intf->beacon->priv_data;
+ memset(priv_tx->desc, 0, intf->beacon->queue->desc_size);
/*
* Fill in skb descriptor
@@ -2395,9 +2383,9 @@
skbdesc = get_skb_frame_desc(skb);
memset(skbdesc, 0, sizeof(*skbdesc));
skbdesc->flags |= FRAME_DESC_DRIVER_GENERATED;
- skbdesc->data = skb->data + intf->beacon->queue->desc_size;
- skbdesc->data_len = skb->len - intf->beacon->queue->desc_size;
- skbdesc->desc = skb->data;
+ skbdesc->data = skb->data;
+ skbdesc->data_len = skb->len;
+ skbdesc->desc = priv_tx->desc;
skbdesc->desc_len = intf->beacon->queue->desc_size;
skbdesc->entry = intf->beacon;
@@ -2425,7 +2413,10 @@
*/
beacon_base = HW_BEACON_OFFSET(intf->beacon->entry_idx);
rt2x00pci_register_multiwrite(rt2x00dev, beacon_base,
- skb->data, skb->len);
+ skbdesc->desc, skbdesc->desc_len);
+ rt2x00pci_register_multiwrite(rt2x00dev,
+ beacon_base + skbdesc->desc_len,
+ skbdesc->data, skbdesc->data_len);
rt61pci_kick_tx_queue(rt2x00dev, control->queue);
return 0;
@@ -2490,7 +2481,7 @@
static const struct data_queue_desc rt61pci_queue_bcn = {
.entry_num = 4 * BEACON_ENTRIES,
- .data_size = MGMT_FRAME_SIZE,
+ .data_size = 0, /* No DMA required for beacons */
.desc_size = TXINFO_SIZE,
.priv_size = sizeof(struct queue_entry_priv_pci_tx),
};
diff --git a/drivers/net/wireless/rtl8180_grf5101.c b/drivers/net/wireless/rtl8180_grf5101.c
index 5d47935..947ee55 100644
--- a/drivers/net/wireless/rtl8180_grf5101.c
+++ b/drivers/net/wireless/rtl8180_grf5101.c
@@ -88,7 +88,7 @@
write_grf5101(dev, 0x0B, chan);
write_grf5101(dev, 0x07, 0x1000);
- grf5101_write_phy_antenna(dev, chan);
+ grf5101_write_phy_antenna(dev, channel);
}
static void grf5101_rf_stop(struct ieee80211_hw *dev)
diff --git a/drivers/net/wireless/rtl8180_max2820.c b/drivers/net/wireless/rtl8180_max2820.c
index a34dfd3..6c825fd 100644
--- a/drivers/net/wireless/rtl8180_max2820.c
+++ b/drivers/net/wireless/rtl8180_max2820.c
@@ -78,7 +78,8 @@
struct ieee80211_conf *conf)
{
struct rtl8180_priv *priv = dev->priv;
- int channel = ieee80211_frequency_to_channel(conf->channel->center_freq);
+ int channel = conf ?
+ ieee80211_frequency_to_channel(conf->channel->center_freq) : 1;
unsigned int chan_idx = channel - 1;
u32 txpw = priv->channels[chan_idx].hw_value & 0xFF;
u32 chan = max2820_chan[chan_idx];
@@ -87,7 +88,7 @@
* sa2400, for MAXIM we do this directly from BB */
rtl8180_write_phy(dev, 3, txpw);
- max2820_write_phy_antenna(dev, chan);
+ max2820_write_phy_antenna(dev, channel);
write_max2820(dev, 3, chan);
}
diff --git a/drivers/net/wireless/rtl8180_sa2400.c b/drivers/net/wireless/rtl8180_sa2400.c
index 0311b4e..cea4e0c 100644
--- a/drivers/net/wireless/rtl8180_sa2400.c
+++ b/drivers/net/wireless/rtl8180_sa2400.c
@@ -86,7 +86,7 @@
write_sa2400(dev, 7, txpw);
- sa2400_write_phy_antenna(dev, chan);
+ sa2400_write_phy_antenna(dev, channel);
write_sa2400(dev, 0, chan);
write_sa2400(dev, 1, 0xbb50);
diff --git a/drivers/net/wireless/rtl8187_dev.c b/drivers/net/wireless/rtl8187_dev.c
index d5787b3..9223ada 100644
--- a/drivers/net/wireless/rtl8187_dev.c
+++ b/drivers/net/wireless/rtl8187_dev.c
@@ -92,6 +92,7 @@
u8 data[4];
struct usb_ctrlrequest dr;
} *buf;
+ int rc;
buf = kmalloc(sizeof(*buf), GFP_ATOMIC);
if (!buf)
@@ -116,7 +117,11 @@
usb_fill_control_urb(urb, priv->udev, usb_sndctrlpipe(priv->udev, 0),
(unsigned char *)dr, buf, len,
rtl8187_iowrite_async_cb, buf);
- usb_submit_urb(urb, GFP_ATOMIC);
+ rc = usb_submit_urb(urb, GFP_ATOMIC);
+ if (rc < 0) {
+ kfree(buf);
+ usb_free_urb(urb);
+ }
}
static inline void rtl818x_iowrite32_async(struct rtl8187_priv *priv,
@@ -169,6 +174,7 @@
struct urb *urb;
__le16 rts_dur = 0;
u32 flags;
+ int rc;
urb = usb_alloc_urb(0, GFP_ATOMIC);
if (!urb) {
@@ -208,7 +214,11 @@
info->dev = dev;
usb_fill_bulk_urb(urb, priv->udev, usb_sndbulkpipe(priv->udev, 2),
hdr, skb->len, rtl8187_tx_cb, skb);
- usb_submit_urb(urb, GFP_ATOMIC);
+ rc = usb_submit_urb(urb, GFP_ATOMIC);
+ if (rc < 0) {
+ usb_free_urb(urb);
+ kfree_skb(skb);
+ }
return 0;
}
diff --git a/drivers/net/wireless/strip.c b/drivers/net/wireless/strip.c
index 5dd23c9..883af89 100644
--- a/drivers/net/wireless/strip.c
+++ b/drivers/net/wireless/strip.c
@@ -2611,7 +2611,7 @@
* We need a write method.
*/
- if (tty->ops->write == NULL)
+ if (tty->ops->write == NULL || tty->ops->set_termios == NULL)
return -EOPNOTSUPP;
/*
diff --git a/drivers/net/wireless/wavelan.c b/drivers/net/wireless/wavelan.c
index 03384a4..49ae970 100644
--- a/drivers/net/wireless/wavelan.c
+++ b/drivers/net/wireless/wavelan.c
@@ -908,9 +908,9 @@
p->psa_call_code[3], p->psa_call_code[4], p->psa_call_code[5],
p->psa_call_code[6], p->psa_call_code[7]);
#ifdef DEBUG_SHOW_UNUSED
- printk(KERN_DEBUG "psa_reserved[]: %02X:%02X:%02X:%02X\n",
+ printk(KERN_DEBUG "psa_reserved[]: %02X:%02X\n",
p->psa_reserved[0],
- p->psa_reserved[1], p->psa_reserved[2], p->psa_reserved[3]);
+ p->psa_reserved[1]);
#endif /* DEBUG_SHOW_UNUSED */
printk(KERN_DEBUG "psa_conf_status: %d, ", p->psa_conf_status);
printk("psa_crc: 0x%02x%02x, ", p->psa_crc[0], p->psa_crc[1]);
diff --git a/drivers/net/wireless/wavelan_cs.c b/drivers/net/wireless/wavelan_cs.c
index baf7401..b584c0e 100644
--- a/drivers/net/wireless/wavelan_cs.c
+++ b/drivers/net/wireless/wavelan_cs.c
@@ -1074,11 +1074,9 @@
p->psa_call_code[6],
p->psa_call_code[7]);
#ifdef DEBUG_SHOW_UNUSED
- printk(KERN_DEBUG "psa_reserved[]: %02X:%02X:%02X:%02X\n",
+ printk(KERN_DEBUG "psa_reserved[]: %02X:%02X\n",
p->psa_reserved[0],
- p->psa_reserved[1],
- p->psa_reserved[2],
- p->psa_reserved[3]);
+ p->psa_reserved[1]);
#endif /* DEBUG_SHOW_UNUSED */
printk(KERN_DEBUG "psa_conf_status: %d, ", p->psa_conf_status);
printk("psa_crc: 0x%02x%02x, ", p->psa_crc[0], p->psa_crc[1]);
diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c
index 69c45ca..418606a 100644
--- a/drivers/net/wireless/zd1211rw/zd_mac.c
+++ b/drivers/net/wireless/zd1211rw/zd_mac.c
@@ -719,7 +719,7 @@
fc = le16_to_cpu(*((__le16 *) buffer));
is_qos = ((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_DATA) &&
- ((fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_QOS_DATA);
+ (fc & IEEE80211_STYPE_QOS_DATA);
is_4addr = (fc & (IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS)) ==
(IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS);
need_padding = is_qos ^ is_4addr;
@@ -805,7 +805,7 @@
u16 int_status;
struct zd_mac *mac = container_of(work, struct zd_mac, process_intr);
- int_status = le16_to_cpu(*(u16 *)(mac->intr_buffer+4));
+ int_status = le16_to_cpu(*(__le16 *)(mac->intr_buffer+4));
if (int_status & INT_CFG_NEXT_BCN) {
if (net_ratelimit())
dev_dbg_f(zd_mac_dev(mac), "INT_CFG_NEXT_BCN\n");
diff --git a/drivers/net/wireless/zd1211rw/zd_usb.c b/drivers/net/wireless/zd1211rw/zd_usb.c
index 5316074..8941f5e 100644
--- a/drivers/net/wireless/zd1211rw/zd_usb.c
+++ b/drivers/net/wireless/zd1211rw/zd_usb.c
@@ -342,7 +342,7 @@
ZD_ASSERT(in_interrupt());
spin_lock(&intr->lock);
- int_num = le16_to_cpu(*(u16 *)(urb->transfer_buffer+2));
+ int_num = le16_to_cpu(*(__le16 *)(urb->transfer_buffer+2));
if (int_num == CR_INTERRUPT) {
struct zd_mac *mac = zd_hw_mac(zd_usb_to_hw(urb->context));
memcpy(&mac->intr_buffer, urb->transfer_buffer,
@@ -889,9 +889,13 @@
}
free_urb:
skb = (struct sk_buff *)urb->context;
- zd_mac_tx_to_dev(skb, urb->status);
+ /*
+ * grab 'usb' pointer before handing off the skb (since
+ * it might be freed by zd_mac_tx_to_dev or mac80211)
+ */
cb = (struct zd_tx_skb_control_block *)skb->cb;
usb = &zd_hw_mac(cb->hw)->chip.usb;
+ zd_mac_tx_to_dev(skb, urb->status);
free_tx_urb(usb, urb);
tx_dec_submitted_urbs(usb);
return;
diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c
index 8bddff1..d26f69b 100644
--- a/drivers/net/xen-netfront.c
+++ b/drivers/net/xen-netfront.c
@@ -946,8 +946,7 @@
work_done++;
}
- while ((skb = __skb_dequeue(&errq)))
- kfree_skb(skb);
+ __skb_queue_purge(&errq);
work_done -= handle_incoming_queue(dev, &rxq);
@@ -1079,8 +1078,7 @@
}
}
- while ((skb = __skb_dequeue(&free_list)) != NULL)
- dev_kfree_skb(skb);
+ __skb_queue_purge(&free_list);
spin_unlock_bh(&np->rx_lock);
}
diff --git a/drivers/of/base.c b/drivers/of/base.c
index 9bd7c4a..23ffb7c 100644
--- a/drivers/of/base.c
+++ b/drivers/of/base.c
@@ -65,6 +65,9 @@
{
struct property *pp;
+ if (!np)
+ return NULL;
+
read_lock(&devtree_lock);
for (pp = np->properties; pp != 0; pp = pp->next) {
if (of_prop_cmp(pp->name, name) == 0) {
diff --git a/drivers/of/of_i2c.c b/drivers/of/of_i2c.c
index 715a444..b2ccdcb 100644
--- a/drivers/of/of_i2c.c
+++ b/drivers/of/of_i2c.c
@@ -21,7 +21,6 @@
};
static struct i2c_driver_device i2c_devices[] = {
- { "dallas,ds1374", "rtc-ds1374" },
};
static int of_find_i2c_driver(struct device_node *node,
diff --git a/drivers/oprofile/cpu_buffer.c b/drivers/oprofile/cpu_buffer.c
index efcbf4b..2450b3a3 100644
--- a/drivers/oprofile/cpu_buffer.c
+++ b/drivers/oprofile/cpu_buffer.c
@@ -27,7 +27,7 @@
#include "buffer_sync.h"
#include "oprof.h"
-DEFINE_PER_CPU_SHARED_ALIGNED(struct oprofile_cpu_buffer, cpu_buffer);
+DEFINE_PER_CPU(struct oprofile_cpu_buffer, cpu_buffer);
static void wq_sync_buffer(struct work_struct *work);
diff --git a/drivers/oprofile/cpu_buffer.h b/drivers/oprofile/cpu_buffer.h
index 1358817..c3e366b 100644
--- a/drivers/oprofile/cpu_buffer.h
+++ b/drivers/oprofile/cpu_buffer.h
@@ -46,7 +46,7 @@
unsigned long sample_invalid_eip;
int cpu;
struct delayed_work work;
-} ____cacheline_aligned;
+};
DECLARE_PER_CPU(struct oprofile_cpu_buffer, cpu_buffer);
diff --git a/drivers/parisc/asp.c b/drivers/parisc/asp.c
index 558420b..8213691 100644
--- a/drivers/parisc/asp.c
+++ b/drivers/parisc/asp.c
@@ -88,7 +88,7 @@
ret = -EBUSY;
dev->irq = gsc_claim_irq(&gsc_irq, ASP_GSC_IRQ);
if (dev->irq < 0) {
- printk(KERN_ERR "%s(): cannot get GSC irq\n", __FUNCTION__);
+ printk(KERN_ERR "%s(): cannot get GSC irq\n", __func__);
goto out;
}
diff --git a/drivers/parisc/ccio-dma.c b/drivers/parisc/ccio-dma.c
index 07d2a8d..b30e38f 100644
--- a/drivers/parisc/ccio-dma.c
+++ b/drivers/parisc/ccio-dma.c
@@ -359,7 +359,7 @@
BUG_ON((pages_needed * IOVP_SIZE) > DMA_CHUNK_SIZE);
DBG_RES("%s() size: %d pages_needed %d\n",
- __FUNCTION__, size, pages_needed);
+ __func__, size, pages_needed);
/*
** "seek and ye shall find"...praying never hurts either...
@@ -395,16 +395,16 @@
#endif
} else {
panic("%s: %s() Too many pages to map. pages_needed: %u\n",
- __FILE__, __FUNCTION__, pages_needed);
+ __FILE__, __func__, pages_needed);
}
panic("%s: %s() I/O MMU is out of mapping resources.\n", __FILE__,
- __FUNCTION__);
+ __func__);
resource_found:
DBG_RES("%s() res_idx %d res_hint: %d\n",
- __FUNCTION__, res_idx, ioc->res_hint);
+ __func__, res_idx, ioc->res_hint);
#ifdef CCIO_SEARCH_TIME
{
@@ -450,7 +450,7 @@
BUG_ON(pages_mapped > BITS_PER_LONG);
DBG_RES("%s(): res_idx: %d pages_mapped %d\n",
- __FUNCTION__, res_idx, pages_mapped);
+ __func__, res_idx, pages_mapped);
#ifdef CCIO_MAP_STATS
ioc->used_pages -= pages_mapped;
@@ -474,7 +474,7 @@
#endif
} else {
panic("%s:%s() Too many pages to unmap.\n", __FILE__,
- __FUNCTION__);
+ __func__);
}
}
@@ -775,7 +775,7 @@
pdir_start = &(ioc->pdir_base[idx]);
DBG_RUN("%s() 0x%p -> 0x%lx size: %0x%x\n",
- __FUNCTION__, addr, (long)iovp | offset, size);
+ __func__, addr, (long)iovp | offset, size);
/* If not cacheline aligned, force SAFE_DMA on the whole mess */
if((size % L1_CACHE_BYTES) || ((unsigned long)addr % L1_CACHE_BYTES))
@@ -820,7 +820,7 @@
ioc = GET_IOC(dev);
DBG_RUN("%s() iovp 0x%lx/%x\n",
- __FUNCTION__, (long)iova, size);
+ __func__, (long)iova, size);
iova ^= offset; /* clear offset bits */
size += offset;
@@ -922,7 +922,7 @@
BUG_ON(!dev);
ioc = GET_IOC(dev);
- DBG_RUN_SG("%s() START %d entries\n", __FUNCTION__, nents);
+ DBG_RUN_SG("%s() START %d entries\n", __func__, nents);
/* Fast path single entry scatterlists. */
if (nents == 1) {
@@ -966,7 +966,7 @@
BUG_ON(coalesced != filled);
- DBG_RUN_SG("%s() DONE %d mappings\n", __FUNCTION__, filled);
+ DBG_RUN_SG("%s() DONE %d mappings\n", __func__, filled);
for (i = 0; i < filled; i++)
current_len += sg_dma_len(sglist + i);
@@ -995,7 +995,7 @@
ioc = GET_IOC(dev);
DBG_RUN_SG("%s() START %d entries, %08lx,%x\n",
- __FUNCTION__, nents, sg_virt_addr(sglist), sglist->length);
+ __func__, nents, sg_virt_addr(sglist), sglist->length);
#ifdef CCIO_MAP_STATS
ioc->usg_calls++;
@@ -1011,7 +1011,7 @@
++sglist;
}
- DBG_RUN_SG("%s() DONE (nents %d)\n", __FUNCTION__, nents);
+ DBG_RUN_SG("%s() DONE (nents %d)\n", __func__, nents);
}
static struct hppa_dma_ops ccio_ops = {
@@ -1225,7 +1225,7 @@
ccio_get_iotlb_size(struct parisc_device *dev)
{
if (dev->spa_shift == 0) {
- panic("%s() : Can't determine I/O TLB size.\n", __FUNCTION__);
+ panic("%s() : Can't determine I/O TLB size.\n", __func__);
}
return (1 << dev->spa_shift);
}
@@ -1315,7 +1315,7 @@
BUG_ON((1 << get_order(ioc->pdir_size)) != (ioc->pdir_size >> PAGE_SHIFT));
DBG_INIT("%s() hpa 0x%p mem %luMB IOV %dMB (%d bits)\n",
- __FUNCTION__, ioc->ioc_regs,
+ __func__, ioc->ioc_regs,
(unsigned long) num_physpages >> (20 - PAGE_SHIFT),
iova_space_size>>20,
iov_order + PAGE_SHIFT);
@@ -1323,7 +1323,7 @@
ioc->pdir_base = (u64 *)__get_free_pages(GFP_KERNEL,
get_order(ioc->pdir_size));
if(NULL == ioc->pdir_base) {
- panic("%s() could not allocate I/O Page Table\n", __FUNCTION__);
+ panic("%s() could not allocate I/O Page Table\n", __func__);
}
memset(ioc->pdir_base, 0, ioc->pdir_size);
@@ -1332,12 +1332,12 @@
/* resource map size dictated by pdir_size */
ioc->res_size = (ioc->pdir_size / sizeof(u64)) >> 3;
- DBG_INIT("%s() res_size 0x%x\n", __FUNCTION__, ioc->res_size);
+ DBG_INIT("%s() res_size 0x%x\n", __func__, ioc->res_size);
ioc->res_map = (u8 *)__get_free_pages(GFP_KERNEL,
get_order(ioc->res_size));
if(NULL == ioc->res_map) {
- panic("%s() could not allocate resource map\n", __FUNCTION__);
+ panic("%s() could not allocate resource map\n", __func__);
}
memset(ioc->res_map, 0, ioc->res_size);
@@ -1409,7 +1409,7 @@
result = insert_resource(&iomem_resource, res);
if (result < 0) {
printk(KERN_ERR "%s() failed to claim CCIO bus address space (%08lx,%08lx)\n",
- __FUNCTION__, res->start, res->end);
+ __func__, res->start, res->end);
}
}
diff --git a/drivers/parisc/dino.c b/drivers/parisc/dino.c
index d9c6322..fd56128 100644
--- a/drivers/parisc/dino.c
+++ b/drivers/parisc/dino.c
@@ -180,7 +180,7 @@
void __iomem *base_addr = d->hba.base_addr;
unsigned long flags;
- DBG("%s: %p, %d, %d, %d\n", __FUNCTION__, base_addr, devfn, where,
+ DBG("%s: %p, %d, %d, %d\n", __func__, base_addr, devfn, where,
size);
spin_lock_irqsave(&d->dinosaur_pen, flags);
@@ -215,7 +215,7 @@
void __iomem *base_addr = d->hba.base_addr;
unsigned long flags;
- DBG("%s: %p, %d, %d, %d\n", __FUNCTION__, base_addr, devfn, where,
+ DBG("%s: %p, %d, %d, %d\n", __func__, base_addr, devfn, where,
size);
spin_lock_irqsave(&d->dinosaur_pen, flags);
@@ -301,7 +301,7 @@
struct dino_device *dino_dev = irq_desc[irq].chip_data;
int local_irq = gsc_find_local_irq(irq, dino_dev->global_irq, DINO_LOCAL_IRQS);
- DBG(KERN_WARNING "%s(0x%p, %d)\n", __FUNCTION__, dino_dev, irq);
+ DBG(KERN_WARNING "%s(0x%p, %d)\n", __func__, dino_dev, irq);
/* Clear the matching bit in the IMR register */
dino_dev->imr &= ~(DINO_MASK_IRQ(local_irq));
@@ -314,7 +314,7 @@
int local_irq = gsc_find_local_irq(irq, dino_dev->global_irq, DINO_LOCAL_IRQS);
u32 tmp;
- DBG(KERN_WARNING "%s(0x%p, %d)\n", __FUNCTION__, dino_dev, irq);
+ DBG(KERN_WARNING "%s(0x%p, %d)\n", __func__, dino_dev, irq);
/*
** clear pending IRQ bits
@@ -340,7 +340,7 @@
tmp = __raw_readl(dino_dev->hba.base_addr+DINO_ILR);
if (tmp & DINO_MASK_IRQ(local_irq)) {
DBG(KERN_WARNING "%s(): IRQ asserted! (ILR 0x%x)\n",
- __FUNCTION__, tmp);
+ __func__, tmp);
gsc_writel(dino_dev->txn_data, dino_dev->txn_addr);
}
}
@@ -388,7 +388,7 @@
int local_irq = __ffs(mask);
int irq = dino_dev->global_irq[local_irq];
DBG(KERN_DEBUG "%s(%d, %p) mask 0x%x\n",
- __FUNCTION__, irq, intr_dev, mask);
+ __func__, irq, intr_dev, mask);
__do_IRQ(irq);
mask &= ~(1 << local_irq);
} while (mask);
@@ -566,7 +566,7 @@
int port_base = HBA_PORT_BASE(dino_dev->hba.hba_num);
DBG(KERN_WARNING "%s(0x%p) bus %d platform_data 0x%p\n",
- __FUNCTION__, bus, bus->secondary,
+ __func__, bus, bus->secondary,
bus->bridge->platform_data);
/* Firmware doesn't set up card-mode dino, so we have to */
diff --git a/drivers/parisc/gsc.c b/drivers/parisc/gsc.c
index 1b3e3fd..f7d088b 100644
--- a/drivers/parisc/gsc.c
+++ b/drivers/parisc/gsc.c
@@ -112,7 +112,7 @@
int local_irq = gsc_find_local_irq(irq, irq_dev->global_irq, 32);
u32 imr;
- DEBPRINTK(KERN_DEBUG "%s(%d) %s: IMR 0x%x\n", __FUNCTION__, irq,
+ DEBPRINTK(KERN_DEBUG "%s(%d) %s: IMR 0x%x\n", __func__, irq,
irq_dev->name, imr);
/* Disable the IRQ line by clearing the bit in the IMR */
@@ -127,7 +127,7 @@
int local_irq = gsc_find_local_irq(irq, irq_dev->global_irq, 32);
u32 imr;
- DEBPRINTK(KERN_DEBUG "%s(%d) %s: IMR 0x%x\n", __FUNCTION__, irq,
+ DEBPRINTK(KERN_DEBUG "%s(%d) %s: IMR 0x%x\n", __func__, irq,
irq_dev->name, imr);
/* Enable the IRQ line by setting the bit in the IMR */
diff --git a/drivers/parisc/lasi.c b/drivers/parisc/lasi.c
index cb3d281..bee5100 100644
--- a/drivers/parisc/lasi.c
+++ b/drivers/parisc/lasi.c
@@ -193,7 +193,7 @@
dev->irq = gsc_alloc_irq(&gsc_irq);
if (dev->irq < 0) {
printk(KERN_ERR "%s(): cannot get GSC irq\n",
- __FUNCTION__);
+ __func__);
kfree(lasi);
return -EBUSY;
}
diff --git a/drivers/parisc/lba_pci.c b/drivers/parisc/lba_pci.c
index 66ce610..a28c894 100644
--- a/drivers/parisc/lba_pci.c
+++ b/drivers/parisc/lba_pci.c
@@ -377,12 +377,12 @@
/* original - Generate config cycle on broken elroy
with risk we will miss PCI bus errors. */
*data = lba_rd_cfg(d, tok, pos, size);
- DBG_CFG("%s(%x+%2x) -> 0x%x (a)\n", __FUNCTION__, tok, pos, *data);
+ DBG_CFG("%s(%x+%2x) -> 0x%x (a)\n", __func__, tok, pos, *data);
return 0;
}
if (LBA_SKIP_PROBE(d) && !lba_device_present(bus->secondary, devfn, d)) {
- DBG_CFG("%s(%x+%2x) -> -1 (b)\n", __FUNCTION__, tok, pos);
+ DBG_CFG("%s(%x+%2x) -> -1 (b)\n", __func__, tok, pos);
/* either don't want to look or know device isn't present. */
*data = ~0U;
return(0);
@@ -398,7 +398,7 @@
case 2: *data = READ_REG16(data_reg + (pos & 2)); break;
case 4: *data = READ_REG32(data_reg); break;
}
- DBG_CFG("%s(%x+%2x) -> 0x%x (c)\n", __FUNCTION__, tok, pos, *data);
+ DBG_CFG("%s(%x+%2x) -> 0x%x (c)\n", __func__, tok, pos, *data);
return 0;
}
@@ -441,16 +441,16 @@
if (!LBA_SKIP_PROBE(d)) {
/* Original Workaround */
lba_wr_cfg(d, tok, pos, (u32) data, size);
- DBG_CFG("%s(%x+%2x) = 0x%x (a)\n", __FUNCTION__, tok, pos,data);
+ DBG_CFG("%s(%x+%2x) = 0x%x (a)\n", __func__, tok, pos,data);
return 0;
}
if (LBA_SKIP_PROBE(d) && (!lba_device_present(bus->secondary, devfn, d))) {
- DBG_CFG("%s(%x+%2x) = 0x%x (b)\n", __FUNCTION__, tok, pos,data);
+ DBG_CFG("%s(%x+%2x) = 0x%x (b)\n", __func__, tok, pos,data);
return 1; /* New Workaround */
}
- DBG_CFG("%s(%x+%2x) = 0x%x (c)\n", __FUNCTION__, tok, pos, data);
+ DBG_CFG("%s(%x+%2x) = 0x%x (c)\n", __func__, tok, pos, data);
/* Basic Algorithm */
LBA_CFG_ADDR_SETUP(d, tok | pos);
@@ -521,7 +521,7 @@
if ((pos > 255) || (devfn > 255))
return -EINVAL;
- DBG_CFG("%s(%x+%2x) <- 0x%x (c)\n", __FUNCTION__, tok, pos, data);
+ DBG_CFG("%s(%x+%2x) <- 0x%x (c)\n", __func__, tok, pos, data);
LBA_CFG_TR4_ADDR_SETUP(d, tok | pos);
switch(size) {
@@ -890,7 +890,7 @@
#define LBA_PORT_OUT(size, mask) \
static void lba_astro_out##size (struct pci_hba_data *d, u16 addr, u##size val) \
{ \
- DBG_PORT("%s(0x%p, 0x%x, 0x%x)\n", __FUNCTION__, d, addr, val); \
+ DBG_PORT("%s(0x%p, 0x%x, 0x%x)\n", __func__, d, addr, val); \
WRITE_REG##size(val, astro_iop_base + addr); \
if (LBA_DEV(d)->hw_rev < 3) \
lba_t32 = READ_U32(d->base_addr + LBA_FUNC_ID); \
@@ -932,7 +932,7 @@
static u##size lba_pat_in##size (struct pci_hba_data *l, u16 addr) \
{ \
u##size t; \
- DBG_PORT("%s(0x%p, 0x%x) ->", __FUNCTION__, l, addr); \
+ DBG_PORT("%s(0x%p, 0x%x) ->", __func__, l, addr); \
t = READ_REG##size(PIOP_TO_GMMIO(LBA_DEV(l), addr)); \
DBG_PORT(" 0x%x\n", t); \
return (t); \
@@ -948,7 +948,7 @@
static void lba_pat_out##size (struct pci_hba_data *l, u16 addr, u##size val) \
{ \
void __iomem *where = PIOP_TO_GMMIO(LBA_DEV(l), addr); \
- DBG_PORT("%s(0x%p, 0x%x, 0x%x)\n", __FUNCTION__, l, addr, val); \
+ DBG_PORT("%s(0x%p, 0x%x, 0x%x)\n", __func__, l, addr, val); \
WRITE_REG##size(val, where); \
/* flush the I/O down to the elroy at least */ \
lba_t32 = READ_U32(l->base_addr + LBA_FUNC_ID); \
@@ -1584,7 +1584,7 @@
WARN_ON((ibase & 0x001fffff) != 0);
WARN_ON((imask & 0x001fffff) != 0);
- DBG("%s() ibase 0x%x imask 0x%x\n", __FUNCTION__, ibase, imask);
+ DBG("%s() ibase 0x%x imask 0x%x\n", __func__, ibase, imask);
WRITE_REG32( imask, base_addr + LBA_IMASK);
WRITE_REG32( ibase, base_addr + LBA_IBASE);
iounmap(base_addr);
diff --git a/drivers/parisc/led.c b/drivers/parisc/led.c
index 703b85e..f9b1266 100644
--- a/drivers/parisc/led.c
+++ b/drivers/parisc/led.c
@@ -569,7 +569,7 @@
default:
printk(KERN_ERR "%s: Wrong LCD/LED model %d !\n",
- __FUNCTION__, lcd_info.model);
+ __func__, lcd_info.model);
return 1;
}
diff --git a/drivers/parisc/sba_iommu.c b/drivers/parisc/sba_iommu.c
index afc849b..bc73b96 100644
--- a/drivers/parisc/sba_iommu.c
+++ b/drivers/parisc/sba_iommu.c
@@ -384,7 +384,7 @@
}
mask = RESMAP_MASK(bits_wanted) >> bitshiftcnt;
- DBG_RES("%s() o %ld %p", __FUNCTION__, o, res_ptr);
+ DBG_RES("%s() o %ld %p", __func__, o, res_ptr);
while(res_ptr < res_end)
{
DBG_RES(" %p %lx %lx\n", res_ptr, mask, *res_ptr);
@@ -454,7 +454,7 @@
#endif
DBG_RES("%s(%x) %d -> %lx hint %x/%x\n",
- __FUNCTION__, size, pages_needed, pide,
+ __func__, size, pages_needed, pide,
(uint) ((unsigned long) ioc->res_hint - (unsigned long) ioc->res_map),
ioc->res_bitshift );
@@ -497,7 +497,7 @@
unsigned long m = RESMAP_MASK(bits_not_wanted) >> (pide & (BITS_PER_LONG - 1));
DBG_RES("%s( ,%x,%x) %x/%lx %x %p %lx\n",
- __FUNCTION__, (uint) iova, size,
+ __func__, (uint) iova, size,
bits_not_wanted, m, pide, res_ptr, *res_ptr);
#ifdef SBA_COLLECT_STATS
@@ -740,7 +740,7 @@
iovp = (dma_addr_t) pide << IOVP_SHIFT;
DBG_RUN("%s() 0x%p -> 0x%lx\n",
- __FUNCTION__, addr, (long) iovp | offset);
+ __func__, addr, (long) iovp | offset);
pdir_start = &(ioc->pdir_base[pide]);
@@ -798,7 +798,7 @@
unsigned long flags;
dma_addr_t offset;
- DBG_RUN("%s() iovp 0x%lx/%x\n", __FUNCTION__, (long) iova, size);
+ DBG_RUN("%s() iovp 0x%lx/%x\n", __func__, (long) iova, size);
ioc = GET_IOC(dev);
offset = iova & ~IOVP_MASK;
@@ -937,7 +937,7 @@
int coalesced, filled = 0;
unsigned long flags;
- DBG_RUN_SG("%s() START %d entries\n", __FUNCTION__, nents);
+ DBG_RUN_SG("%s() START %d entries\n", __func__, nents);
ioc = GET_IOC(dev);
@@ -998,7 +998,7 @@
spin_unlock_irqrestore(&ioc->res_lock, flags);
- DBG_RUN_SG("%s() DONE %d mappings\n", __FUNCTION__, filled);
+ DBG_RUN_SG("%s() DONE %d mappings\n", __func__, filled);
return filled;
}
@@ -1023,7 +1023,7 @@
#endif
DBG_RUN_SG("%s() START %d entries, %p,%x\n",
- __FUNCTION__, nents, sg_virt_addr(sglist), sglist->length);
+ __func__, nents, sg_virt_addr(sglist), sglist->length);
ioc = GET_IOC(dev);
@@ -1047,7 +1047,7 @@
++sglist;
}
- DBG_RUN_SG("%s() DONE (nents %d)\n", __FUNCTION__, nents);
+ DBG_RUN_SG("%s() DONE (nents %d)\n", __func__, nents);
#ifdef ASSERT_PDIR_SANITY
spin_lock_irqsave(&ioc->res_lock, flags);
@@ -1118,7 +1118,7 @@
pdir_base = __get_free_pages(GFP_KERNEL, pdir_order);
if (NULL == (void *) pdir_base) {
panic("%s() could not allocate I/O Page Table\n",
- __FUNCTION__);
+ __func__);
}
/* If this is not PA8700 (PCX-W2)
@@ -1261,7 +1261,7 @@
ioc->pdir_size = (iova_space_size / IOVP_SIZE) * sizeof(u64);
DBG_INIT("%s() hpa 0x%p IOV %dMB (%d bits)\n",
- __FUNCTION__, ioc->ioc_hpa, iova_space_size >> 20,
+ __func__, ioc->ioc_hpa, iova_space_size >> 20,
iov_order + PAGE_SHIFT);
ioc->pdir_base = (void *) __get_free_pages(GFP_KERNEL,
@@ -1272,7 +1272,7 @@
memset(ioc->pdir_base, 0, ioc->pdir_size);
DBG_INIT("%s() pdir %p size %x\n",
- __FUNCTION__, ioc->pdir_base, ioc->pdir_size);
+ __func__, ioc->pdir_base, ioc->pdir_size);
#ifdef SBA_HINT_SUPPORT
ioc->hint_shift_pdir = iov_order + PAGE_SHIFT;
@@ -1354,7 +1354,7 @@
if (agp_found && sba_reserve_agpgart) {
printk(KERN_INFO "%s: reserving %dMb of IOVA space for agpgart\n",
- __FUNCTION__, (iova_space_size/2) >> 20);
+ __func__, (iova_space_size/2) >> 20);
ioc->pdir_size /= 2;
ioc->pdir_base[PDIR_INDEX(iova_space_size/2)] = SBA_AGPGART_COOKIE;
}
@@ -1406,7 +1406,7 @@
ioc->pdir_size = pdir_size = (iova_space_size/IOVP_SIZE) * sizeof(u64);
DBG_INIT("%s() hpa 0x%lx mem %ldMB IOV %dMB (%d bits)\n",
- __FUNCTION__,
+ __func__,
ioc->ioc_hpa,
(unsigned long) num_physpages >> (20 - PAGE_SHIFT),
iova_space_size>>20,
@@ -1415,7 +1415,7 @@
ioc->pdir_base = sba_alloc_pdir(pdir_size);
DBG_INIT("%s() pdir %p size %x\n",
- __FUNCTION__, ioc->pdir_base, pdir_size);
+ __func__, ioc->pdir_base, pdir_size);
#ifdef SBA_HINT_SUPPORT
/* FIXME : DMA HINTs not used */
@@ -1443,7 +1443,7 @@
#endif
DBG_INIT("%s() IOV base 0x%lx mask 0x%0lx\n",
- __FUNCTION__, ioc->ibase, ioc->imask);
+ __func__, ioc->ibase, ioc->imask);
/*
** FIXME: Hint registers are programmed with default hint
@@ -1470,7 +1470,7 @@
ioc->ibase = 0; /* used by SBA_IOVA and related macros */
- DBG_INIT("%s() DONE\n", __FUNCTION__);
+ DBG_INIT("%s() DONE\n", __func__);
}
@@ -1544,7 +1544,7 @@
if (!IS_PLUTO(sba_dev->dev)) {
ioc_ctl = READ_REG(sba_dev->sba_hpa+IOC_CTRL);
DBG_INIT("%s() hpa 0x%lx ioc_ctl 0x%Lx ->",
- __FUNCTION__, sba_dev->sba_hpa, ioc_ctl);
+ __func__, sba_dev->sba_hpa, ioc_ctl);
ioc_ctl &= ~(IOC_CTRL_RM | IOC_CTRL_NC | IOC_CTRL_CE);
ioc_ctl |= IOC_CTRL_DD | IOC_CTRL_D4 | IOC_CTRL_TC;
/* j6700 v1.6 firmware sets 0x294f */
@@ -1675,7 +1675,7 @@
res_size >>= 3; /* convert bit count to byte count */
DBG_INIT("%s() res_size 0x%x\n",
- __FUNCTION__, res_size);
+ __func__, res_size);
sba_dev->ioc[i].res_size = res_size;
sba_dev->ioc[i].res_map = (char *) __get_free_pages(GFP_KERNEL, get_order(res_size));
@@ -1688,7 +1688,7 @@
if (NULL == sba_dev->ioc[i].res_map)
{
panic("%s:%s() could not allocate resource map\n",
- __FILE__, __FUNCTION__ );
+ __FILE__, __func__ );
}
memset(sba_dev->ioc[i].res_map, 0, res_size);
@@ -1725,7 +1725,7 @@
#endif
DBG_INIT("%s() %d res_map %x %p\n",
- __FUNCTION__, i, res_size, sba_dev->ioc[i].res_map);
+ __func__, i, res_size, sba_dev->ioc[i].res_map);
}
spin_lock_init(&sba_dev->sba_lock);
diff --git a/drivers/parisc/wax.c b/drivers/parisc/wax.c
index 813c2c2..892a83b 100644
--- a/drivers/parisc/wax.c
+++ b/drivers/parisc/wax.c
@@ -93,7 +93,7 @@
dev->irq = gsc_claim_irq(&gsc_irq, WAX_GSC_IRQ);
if (dev->irq < 0) {
printk(KERN_ERR "%s(): cannot get GSC irq\n",
- __FUNCTION__);
+ __func__);
kfree(wax);
return -EBUSY;
}
diff --git a/drivers/pci/hotplug/pci_hotplug_core.c b/drivers/pci/hotplug/pci_hotplug_core.c
index 925ba16..a11021e 100644
--- a/drivers/pci/hotplug/pci_hotplug_core.c
+++ b/drivers/pci/hotplug/pci_hotplug_core.c
@@ -619,6 +619,7 @@
int pci_hp_register (struct hotplug_slot *slot)
{
int result;
+ struct hotplug_slot *tmp;
if (slot == NULL)
return -ENODEV;
@@ -630,7 +631,11 @@
return -EINVAL;
}
- /* this can fail if we have already registered a slot with the same name */
+ /* Check if we have already registered a slot with the same name. */
+ tmp = get_slot_from_name(slot->name);
+ if (tmp)
+ return -EEXIST;
+
slot->kobj.kset = pci_hotplug_slots_kset;
result = kobject_init_and_add(&slot->kobj, &hotplug_slot_ktype, NULL,
"%s", slot->name);
diff --git a/drivers/pci/hotplug/pciehp.h b/drivers/pci/hotplug/pciehp.h
index 8264a76..79c9dda 100644
--- a/drivers/pci/hotplug/pciehp.h
+++ b/drivers/pci/hotplug/pciehp.h
@@ -97,6 +97,7 @@
u8 cap_base;
struct timer_list poll_timer;
volatile int cmd_busy;
+ unsigned int no_cmd_complete:1;
};
#define INT_BUTTON_IGNORE 0
@@ -135,6 +136,7 @@
#define PWR_LED_PRSN 0x00000010
#define HP_SUPR_RM_SUP 0x00000020
#define EMI_PRSN 0x00020000
+#define NO_CMD_CMPL_SUP 0x00040000
#define ATTN_BUTTN(ctrl) ((ctrl)->slot_cap & ATTN_BUTTN_PRSN)
#define POWER_CTRL(ctrl) ((ctrl)->slot_cap & PWR_CTRL_PRSN)
@@ -143,13 +145,14 @@
#define PWR_LED(ctrl) ((ctrl)->slot_cap & PWR_LED_PRSN)
#define HP_SUPR_RM(ctrl) ((ctrl)->slot_cap & HP_SUPR_RM_SUP)
#define EMI(ctrl) ((ctrl)->slot_cap & EMI_PRSN)
+#define NO_CMD_CMPL(ctrl) ((ctrl)->slot_cap & NO_CMD_CMPL_SUP)
extern int pciehp_sysfs_enable_slot(struct slot *slot);
extern int pciehp_sysfs_disable_slot(struct slot *slot);
-extern u8 pciehp_handle_attention_button(u8 hp_slot, struct controller *ctrl);
-extern u8 pciehp_handle_switch_change(u8 hp_slot, struct controller *ctrl);
-extern u8 pciehp_handle_presence_change(u8 hp_slot, struct controller *ctrl);
-extern u8 pciehp_handle_power_fault(u8 hp_slot, struct controller *ctrl);
+extern u8 pciehp_handle_attention_button(struct slot *p_slot);
+ extern u8 pciehp_handle_switch_change(struct slot *p_slot);
+extern u8 pciehp_handle_presence_change(struct slot *p_slot);
+extern u8 pciehp_handle_power_fault(struct slot *p_slot);
extern int pciehp_configure_device(struct slot *p_slot);
extern int pciehp_unconfigure_device(struct slot *p_slot);
extern void pciehp_queue_pushbutton_work(struct work_struct *work);
diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c
index 43d8ddb..48a2ed3 100644
--- a/drivers/pci/hotplug/pciehp_core.c
+++ b/drivers/pci/hotplug/pciehp_core.c
@@ -254,7 +254,11 @@
slot->hp_slot, slot->number, ctrl->slot_device_offset);
retval = pci_hp_register(hotplug_slot);
if (retval) {
- err ("pci_hp_register failed with error %d\n", retval);
+ err("pci_hp_register failed with error %d\n", retval);
+ if (retval == -EEXIST)
+ err("Failed to register slot because of name "
+ "collision. Try \'pciehp_slot_with_bus\' "
+ "module option.\n");
goto error_info;
}
/* create additional sysfs entries */
diff --git a/drivers/pci/hotplug/pciehp_ctrl.c b/drivers/pci/hotplug/pciehp_ctrl.c
index 0a7aa62..96a5d55 100644
--- a/drivers/pci/hotplug/pciehp_ctrl.c
+++ b/drivers/pci/hotplug/pciehp_ctrl.c
@@ -55,16 +55,13 @@
return 0;
}
-u8 pciehp_handle_attention_button(u8 hp_slot, struct controller *ctrl)
+u8 pciehp_handle_attention_button(struct slot *p_slot)
{
- struct slot *p_slot;
u32 event_type;
/* Attention Button Change */
dbg("pciehp: Attention button interrupt received.\n");
- p_slot = pciehp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
-
/*
* Button pressed - See if need to TAKE ACTION!!!
*/
@@ -76,18 +73,15 @@
return 0;
}
-u8 pciehp_handle_switch_change(u8 hp_slot, struct controller *ctrl)
+u8 pciehp_handle_switch_change(struct slot *p_slot)
{
- struct slot *p_slot;
u8 getstatus;
u32 event_type;
/* Switch Change */
dbg("pciehp: Switch interrupt received.\n");
- p_slot = pciehp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
p_slot->hpc_ops->get_latch_status(p_slot, &getstatus);
-
if (getstatus) {
/*
* Switch opened
@@ -107,17 +101,14 @@
return 1;
}
-u8 pciehp_handle_presence_change(u8 hp_slot, struct controller *ctrl)
+u8 pciehp_handle_presence_change(struct slot *p_slot)
{
- struct slot *p_slot;
u32 event_type;
u8 presence_save;
/* Presence Change */
dbg("pciehp: Presence/Notify input change.\n");
- p_slot = pciehp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
-
/* Switch is open, assume a presence change
* Save the presence state
*/
@@ -141,16 +132,13 @@
return 1;
}
-u8 pciehp_handle_power_fault(u8 hp_slot, struct controller *ctrl)
+u8 pciehp_handle_power_fault(struct slot *p_slot)
{
- struct slot *p_slot;
u32 event_type;
/* power fault */
dbg("pciehp: Power fault interrupt received.\n");
- p_slot = pciehp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
-
if ( !(p_slot->hpc_ops->query_power_fault(p_slot))) {
/*
* power fault Cleared
@@ -163,7 +151,7 @@
*/
info("Power fault on Slot(%s)\n", p_slot->name);
event_type = INT_POWER_FAULT;
- info("power fault bit %x set\n", hp_slot);
+ info("power fault bit %x set\n", 0);
}
queue_interrupt_event(p_slot, event_type);
@@ -186,6 +174,13 @@
}
}
+ /*
+ * After turning power off, we must wait for at least 1 second
+ * before taking any action that relies on power having been
+ * removed from the slot/adapter.
+ */
+ msleep(1000);
+
if (PWR_LED(ctrl))
pslot->hpc_ops->green_led_off(pslot);
@@ -289,6 +284,13 @@
}
}
+ /*
+ * After turning power off, we must wait for at least 1 second
+ * before taking any action that relies on power having been
+ * removed from the slot/adapter.
+ */
+ msleep(1000);
+
if (PWR_LED(ctrl))
/* turn off Green LED */
p_slot->hpc_ops->green_led_off(p_slot);
diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
index 891f81a..79f1049 100644
--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -247,14 +247,38 @@
free_irq(ctrl->pci_dev->irq, ctrl);
}
-static inline int pcie_wait_cmd(struct controller *ctrl)
+static inline int pcie_poll_cmd(struct controller *ctrl)
+{
+ u16 slot_status;
+ int timeout = 1000;
+
+ if (!pciehp_readw(ctrl, SLOTSTATUS, &slot_status))
+ if (slot_status & CMD_COMPLETED)
+ goto completed;
+ for (timeout = 1000; timeout > 0; timeout -= 100) {
+ msleep(100);
+ if (!pciehp_readw(ctrl, SLOTSTATUS, &slot_status))
+ if (slot_status & CMD_COMPLETED)
+ goto completed;
+ }
+ return 0; /* timeout */
+
+completed:
+ pciehp_writew(ctrl, SLOTSTATUS, CMD_COMPLETED);
+ return timeout;
+}
+
+static inline int pcie_wait_cmd(struct controller *ctrl, int poll)
{
int retval = 0;
unsigned int msecs = pciehp_poll_mode ? 2500 : 1000;
unsigned long timeout = msecs_to_jiffies(msecs);
int rc;
- rc = wait_event_interruptible_timeout(ctrl->queue,
+ if (poll)
+ rc = pcie_poll_cmd(ctrl);
+ else
+ rc = wait_event_interruptible_timeout(ctrl->queue,
!ctrl->cmd_busy, timeout);
if (!rc)
dbg("Command not completed in 1000 msec\n");
@@ -286,12 +310,28 @@
goto out;
}
- if ((slot_status & CMD_COMPLETED) == CMD_COMPLETED ) {
- /* After 1 sec and CMD_COMPLETED still not set, just
- proceed forward to issue the next command according
- to spec. Just print out the error message */
- dbg("%s: CMD_COMPLETED not clear after 1 sec.\n",
- __func__);
+ if (slot_status & CMD_COMPLETED) {
+ if (!ctrl->no_cmd_complete) {
+ /*
+ * After 1 sec and CMD_COMPLETED still not set, just
+ * proceed forward to issue the next command according
+ * to spec. Just print out the error message.
+ */
+ dbg("%s: CMD_COMPLETED not clear after 1 sec.\n",
+ __func__);
+ } else if (!NO_CMD_CMPL(ctrl)) {
+ /*
+ * This controller semms to notify of command completed
+ * event even though it supports none of power
+ * controller, attention led, power led and EMI.
+ */
+ dbg("%s: Unexpected CMD_COMPLETED. Need to wait for "
+ "command completed event.\n", __func__);
+ ctrl->no_cmd_complete = 0;
+ } else {
+ dbg("%s: Unexpected CMD_COMPLETED. Maybe the "
+ "controller is broken.\n", __func__);
+ }
}
retval = pciehp_readw(ctrl, SLOTCTRL, &slot_ctrl);
@@ -315,8 +355,18 @@
/*
* Wait for command completion.
*/
- if (!retval)
- retval = pcie_wait_cmd(ctrl);
+ if (!retval && !ctrl->no_cmd_complete) {
+ int poll = 0;
+ /*
+ * if hotplug interrupt is not enabled or command
+ * completed interrupt is not enabled, we need to poll
+ * command completed event.
+ */
+ if (!(slot_ctrl & HP_INTR_ENABLE) ||
+ !(slot_ctrl & CMD_CMPL_INTR_ENABLE))
+ poll = 1;
+ retval = pcie_wait_cmd(ctrl, poll);
+ }
out:
mutex_unlock(&ctrl->ctrl_lock);
return retval;
@@ -704,13 +754,6 @@
}
dbg("%s: SLOTCTRL %x write cmd %x\n",
__func__, ctrl->cap_base + SLOTCTRL, slot_cmd);
-
- /*
- * After turning power off, we must wait for at least 1 second
- * before taking any action that relies on power having been
- * removed from the slot/adapter.
- */
- msleep(1000);
out:
if (changed)
pcie_unmask_bad_dllp(ctrl);
@@ -722,6 +765,7 @@
{
struct controller *ctrl = (struct controller *)dev_id;
u16 detected, intr_loc;
+ struct slot *p_slot;
/*
* In order to guarantee that all interrupt events are
@@ -756,21 +800,38 @@
wake_up_interruptible(&ctrl->queue);
}
+ if (!(intr_loc & ~CMD_COMPLETED))
+ return IRQ_HANDLED;
+
+ /*
+ * Return without handling events if this handler routine is
+ * called before controller initialization is done. This may
+ * happen if hotplug event or another interrupt that shares
+ * the IRQ with pciehp arrives before slot initialization is
+ * done after interrupt handler is registered.
+ *
+ * FIXME - Need more structural fixes. We need to be ready to
+ * handle the event before installing interrupt handler.
+ */
+ p_slot = pciehp_find_slot(ctrl, ctrl->slot_device_offset);
+ if (!p_slot || !p_slot->hpc_ops)
+ return IRQ_HANDLED;
+
/* Check MRL Sensor Changed */
if (intr_loc & MRL_SENS_CHANGED)
- pciehp_handle_switch_change(0, ctrl);
+ pciehp_handle_switch_change(p_slot);
/* Check Attention Button Pressed */
if (intr_loc & ATTN_BUTTN_PRESSED)
- pciehp_handle_attention_button(0, ctrl);
+ pciehp_handle_attention_button(p_slot);
/* Check Presence Detect Changed */
if (intr_loc & PRSN_DETECT_CHANGED)
- pciehp_handle_presence_change(0, ctrl);
+ pciehp_handle_presence_change(p_slot);
/* Check Power Fault Detected */
if (intr_loc & PWR_FAULT_DETECTED)
- pciehp_handle_power_fault(0, ctrl);
+ pciehp_handle_power_fault(p_slot);
return IRQ_HANDLED;
}
@@ -1028,6 +1089,12 @@
static int pcie_init_hardware_part1(struct controller *ctrl,
struct pcie_device *dev)
{
+ /* Clear all remaining event bits in Slot Status register */
+ if (pciehp_writew(ctrl, SLOTSTATUS, 0x1f)) {
+ err("%s: Cannot write to SLOTSTATUS register\n", __func__);
+ return -1;
+ }
+
/* Mask Hot-plug Interrupt Enable */
if (pcie_write_cmd(ctrl, 0, HP_INTR_ENABLE | CMD_CMPL_INTR_ENABLE)) {
err("%s: Cannot mask hotplug interrupt enable\n", __func__);
@@ -1040,16 +1107,6 @@
{
u16 cmd, mask;
- /*
- * We need to clear all events before enabling hotplug interrupt
- * notification mechanism in order for hotplug controler to
- * generate interrupts.
- */
- if (pciehp_writew(ctrl, SLOTSTATUS, 0x1f)) {
- err("%s: Cannot write to SLOTSTATUS register\n", __FUNCTION__);
- return -1;
- }
-
cmd = PRSN_DETECT_ENABLE;
if (ATTN_BUTTN(ctrl))
cmd |= ATTN_BUTTN_ENABLE;
@@ -1116,6 +1173,7 @@
dbg(" Power Indicator : %3s\n", PWR_LED(ctrl) ? "yes" : "no");
dbg(" Hot-Plug Surprise : %3s\n", HP_SUPR_RM(ctrl) ? "yes" : "no");
dbg(" EMI Present : %3s\n", EMI(ctrl) ? "yes" : "no");
+ dbg(" Comamnd Completed : %3s\n", NO_CMD_CMPL(ctrl)? "no" : "yes");
pciehp_readw(ctrl, SLOTSTATUS, ®16);
dbg("Slot Status : 0x%04x\n", reg16);
pciehp_readw(ctrl, SLOTSTATUS, ®16);
@@ -1147,6 +1205,15 @@
mutex_init(&ctrl->ctrl_lock);
init_waitqueue_head(&ctrl->queue);
dbg_ctrl(ctrl);
+ /*
+ * Controller doesn't notify of command completion if the "No
+ * Command Completed Support" bit is set in Slot Capability
+ * register or the controller supports none of power
+ * controller, attention led, power led and EMI.
+ */
+ if (NO_CMD_CMPL(ctrl) ||
+ !(POWER_CTRL(ctrl) | ATTN_LED(ctrl) | PWR_LED(ctrl) | EMI(ctrl)))
+ ctrl->no_cmd_complete = 1;
info("HPC vendor_id %x device_id %x ss_vid %x ss_did %x\n",
pdev->vendor, pdev->device,
diff --git a/drivers/pci/hotplug/rpadlpar_sysfs.c b/drivers/pci/hotplug/rpadlpar_sysfs.c
index e32148a..779c5db 100644
--- a/drivers/pci/hotplug/rpadlpar_sysfs.c
+++ b/drivers/pci/hotplug/rpadlpar_sysfs.c
@@ -18,8 +18,12 @@
#include "rpadlpar.h"
#define DLPAR_KOBJ_NAME "control"
-#define ADD_SLOT_ATTR_NAME "add_slot"
-#define REMOVE_SLOT_ATTR_NAME "remove_slot"
+
+/* Those two have no quotes because they are passed to __ATTR() which
+ * stringifies the argument (yuck !)
+ */
+#define ADD_SLOT_ATTR_NAME add_slot
+#define REMOVE_SLOT_ATTR_NAME remove_slot
#define MAX_DRC_NAME_LEN 64
diff --git a/drivers/pci/hotplug/shpchp_core.c b/drivers/pci/hotplug/shpchp_core.c
index 1648076..9784865 100644
--- a/drivers/pci/hotplug/shpchp_core.c
+++ b/drivers/pci/hotplug/shpchp_core.c
@@ -162,6 +162,10 @@
retval = pci_hp_register(slot->hotplug_slot);
if (retval) {
err("pci_hp_register failed with error %d\n", retval);
+ if (retval == -EEXIST)
+ err("Failed to register slot because of name "
+ "collision. Try \'shpchp_slot_with_bus\' "
+ "module option.\n");
goto error_info;
}
diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c
index 1fd8bb7..66c0fd2 100644
--- a/drivers/pci/intel-iommu.c
+++ b/drivers/pci/intel-iommu.c
@@ -49,7 +49,7 @@
#define DEFAULT_DOMAIN_ADDRESS_WIDTH 48
-#define DMAR_OPERATION_TIMEOUT (HZ*60) /* 1m */
+#define DMAR_OPERATION_TIMEOUT ((cycles_t) tsc_khz*10*1000) /* 10sec */
#define DOMAIN_MAX_ADDR(gaw) ((((u64)1) << gaw) - 1)
@@ -490,12 +490,12 @@
#define IOMMU_WAIT_OP(iommu, offset, op, cond, sts) \
{\
- unsigned long start_time = jiffies;\
+ cycles_t start_time = get_cycles();\
while (1) {\
sts = op (iommu->reg + offset);\
if (cond)\
break;\
- if (time_after(jiffies, start_time + DMAR_OPERATION_TIMEOUT))\
+ if (DMAR_OPERATION_TIMEOUT < (get_cycles() - start_time))\
panic("DMAR hardware is malfunctioning\n");\
cpu_relax();\
}\
diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
index 72f7476..9d6fc8e 100644
--- a/drivers/pci/pci-acpi.c
+++ b/drivers/pci/pci-acpi.c
@@ -19,8 +19,31 @@
#include <linux/pci-acpi.h>
#include "pci.h"
-static u32 ctrlset_buf[3] = {0, 0, 0};
-static u32 global_ctrlsets = 0;
+struct acpi_osc_data {
+ acpi_handle handle;
+ u32 ctrlset_buf[3];
+ u32 global_ctrlsets;
+ struct list_head sibiling;
+};
+static LIST_HEAD(acpi_osc_data_list);
+
+static struct acpi_osc_data *acpi_get_osc_data(acpi_handle handle)
+{
+ struct acpi_osc_data *data;
+
+ list_for_each_entry(data, &acpi_osc_data_list, sibiling) {
+ if (data->handle == handle)
+ return data;
+ }
+ data = kzalloc(sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return NULL;
+ INIT_LIST_HEAD(&data->sibiling);
+ data->handle = handle;
+ list_add_tail(&data->sibiling, &acpi_osc_data_list);
+ return data;
+}
+
static u8 OSC_UUID[16] = {0x5B, 0x4D, 0xDB, 0x33, 0xF7, 0x1F, 0x1C, 0x40, 0x96, 0x57, 0x74, 0x41, 0xC0, 0x3D, 0xD7, 0x66};
static acpi_status
@@ -37,8 +60,27 @@
union acpi_object *out_obj;
u32 osc_dw0;
acpi_status *ret_status = (acpi_status *)retval;
+ struct acpi_osc_data *osc_data;
+ u32 flags = (unsigned long)context, temp;
+ acpi_handle tmp;
-
+ status = acpi_get_handle(handle, "_OSC", &tmp);
+ if (ACPI_FAILURE(status))
+ return status;
+
+ osc_data = acpi_get_osc_data(handle);
+ if (!osc_data) {
+ printk(KERN_ERR "acpi osc data array is full\n");
+ return AE_ERROR;
+ }
+
+ osc_data->ctrlset_buf[OSC_SUPPORT_TYPE] |= (flags & OSC_SUPPORT_MASKS);
+
+ /* do _OSC query for all possible controls */
+ temp = osc_data->ctrlset_buf[OSC_CONTROL_TYPE];
+ osc_data->ctrlset_buf[OSC_QUERY_TYPE] = OSC_QUERY_ENABLE;
+ osc_data->ctrlset_buf[OSC_CONTROL_TYPE] = OSC_CONTROL_MASKS;
+
/* Setting up input parameters */
input.count = 4;
input.pointer = in_params;
@@ -51,13 +93,11 @@
in_params[2].integer.value = 3;
in_params[3].type = ACPI_TYPE_BUFFER;
in_params[3].buffer.length = 12;
- in_params[3].buffer.pointer = (u8 *)context;
+ in_params[3].buffer.pointer = (u8 *)osc_data->ctrlset_buf;
status = acpi_evaluate_object(handle, "_OSC", &input, &output);
- if (ACPI_FAILURE (status)) {
- *ret_status = status;
- return status;
- }
+ if (ACPI_FAILURE(status))
+ goto out_nofree;
out_obj = output.pointer;
if (out_obj->type != ACPI_TYPE_BUFFER) {
@@ -76,7 +116,8 @@
printk(KERN_DEBUG "_OSC invalid revision\n");
if (osc_dw0 & OSC_CAPABILITIES_MASK_ERROR) {
/* Update Global Control Set */
- global_ctrlsets = *((u32 *)(out_obj->buffer.pointer+8));
+ osc_data->global_ctrlsets =
+ *((u32 *)(out_obj->buffer.pointer + 8));
status = AE_OK;
goto query_osc_out;
}
@@ -85,12 +126,21 @@
}
/* Update Global Control Set */
- global_ctrlsets = *((u32 *)(out_obj->buffer.pointer + 8));
+ osc_data->global_ctrlsets = *((u32 *)(out_obj->buffer.pointer + 8));
status = AE_OK;
query_osc_out:
kfree(output.pointer);
+out_nofree:
*ret_status = status;
+
+ osc_data->ctrlset_buf[OSC_QUERY_TYPE] = !OSC_QUERY_ENABLE;
+ osc_data->ctrlset_buf[OSC_CONTROL_TYPE] = temp;
+ if (ACPI_FAILURE(status)) {
+ /* no osc support at all */
+ osc_data->ctrlset_buf[OSC_SUPPORT_TYPE] = 0;
+ }
+
return status;
}
@@ -165,28 +215,15 @@
**/
acpi_status __pci_osc_support_set(u32 flags, const char *hid)
{
- u32 temp;
- acpi_status retval;
+ acpi_status retval = AE_NOT_FOUND;
if (!(flags & OSC_SUPPORT_MASKS)) {
return AE_TYPE;
}
- ctrlset_buf[OSC_SUPPORT_TYPE] |= (flags & OSC_SUPPORT_MASKS);
-
- /* do _OSC query for all possible controls */
- temp = ctrlset_buf[OSC_CONTROL_TYPE];
- ctrlset_buf[OSC_QUERY_TYPE] = OSC_QUERY_ENABLE;
- ctrlset_buf[OSC_CONTROL_TYPE] = OSC_CONTROL_MASKS;
acpi_get_devices(hid,
acpi_query_osc,
- ctrlset_buf,
+ (void *)(unsigned long)flags,
(void **) &retval );
- ctrlset_buf[OSC_QUERY_TYPE] = !OSC_QUERY_ENABLE;
- ctrlset_buf[OSC_CONTROL_TYPE] = temp;
- if (ACPI_FAILURE(retval)) {
- /* no osc support at all */
- ctrlset_buf[OSC_SUPPORT_TYPE] = 0;
- }
return AE_OK;
}
@@ -201,19 +238,31 @@
{
acpi_status status;
u32 ctrlset;
+ acpi_handle tmp;
+ struct acpi_osc_data *osc_data;
+
+ status = acpi_get_handle(handle, "_OSC", &tmp);
+ if (ACPI_FAILURE(status))
+ return status;
+
+ osc_data = acpi_get_osc_data(handle);
+ if (!osc_data) {
+ printk(KERN_ERR "acpi osc data array is full\n");
+ return AE_ERROR;
+ }
ctrlset = (flags & OSC_CONTROL_MASKS);
if (!ctrlset) {
return AE_TYPE;
}
- if (ctrlset_buf[OSC_SUPPORT_TYPE] &&
- ((global_ctrlsets & ctrlset) != ctrlset)) {
+ if (osc_data->ctrlset_buf[OSC_SUPPORT_TYPE] &&
+ ((osc_data->global_ctrlsets & ctrlset) != ctrlset)) {
return AE_SUPPORT;
}
- ctrlset_buf[OSC_CONTROL_TYPE] |= ctrlset;
- status = acpi_run_osc(handle, ctrlset_buf);
+ osc_data->ctrlset_buf[OSC_CONTROL_TYPE] |= ctrlset;
+ status = acpi_run_osc(handle, osc_data->ctrlset_buf);
if (ACPI_FAILURE (status)) {
- ctrlset_buf[OSC_CONTROL_TYPE] &= ~ctrlset;
+ osc_data->ctrlset_buf[OSC_CONTROL_TYPE] &= ~ctrlset;
}
return status;
diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c
index 72cf61e..e1637bd 100644
--- a/drivers/pci/pci-driver.c
+++ b/drivers/pci/pci-driver.c
@@ -181,7 +181,7 @@
any need to change it. */
struct mempolicy *oldpol;
cpumask_t oldmask = current->cpus_allowed;
- int node = pcibus_to_node(dev->bus);
+ int node = dev_to_node(&dev->dev);
if (node >= 0) {
node_to_cpumask_ptr(nodecpumask, node);
diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
index 271d41c..6f3c744 100644
--- a/drivers/pci/pci-sysfs.c
+++ b/drivers/pci/pci-sysfs.c
@@ -489,13 +489,13 @@
* @kobj: kobject for mapping
* @attr: struct bin_attribute for the file being mapped
* @vma: struct vm_area_struct passed into the mmap
+ * @write_combine: 1 for write_combine mapping
*
* Use the regular PCI mapping routines to map a PCI resource into userspace.
- * FIXME: write combining? maybe automatic for prefetchable regions?
*/
static int
pci_mmap_resource(struct kobject *kobj, struct bin_attribute *attr,
- struct vm_area_struct *vma)
+ struct vm_area_struct *vma, int write_combine)
{
struct pci_dev *pdev = to_pci_dev(container_of(kobj,
struct device, kobj));
@@ -518,7 +518,21 @@
vma->vm_pgoff += start >> PAGE_SHIFT;
mmap_type = res->flags & IORESOURCE_MEM ? pci_mmap_mem : pci_mmap_io;
- return pci_mmap_page_range(pdev, vma, mmap_type, 0);
+ return pci_mmap_page_range(pdev, vma, mmap_type, write_combine);
+}
+
+static int
+pci_mmap_resource_uc(struct kobject *kobj, struct bin_attribute *attr,
+ struct vm_area_struct *vma)
+{
+ return pci_mmap_resource(kobj, attr, vma, 0);
+}
+
+static int
+pci_mmap_resource_wc(struct kobject *kobj, struct bin_attribute *attr,
+ struct vm_area_struct *vma)
+{
+ return pci_mmap_resource(kobj, attr, vma, 1);
}
/**
@@ -541,9 +555,46 @@
sysfs_remove_bin_file(&pdev->dev.kobj, res_attr);
kfree(res_attr);
}
+
+ res_attr = pdev->res_attr_wc[i];
+ if (res_attr) {
+ sysfs_remove_bin_file(&pdev->dev.kobj, res_attr);
+ kfree(res_attr);
+ }
}
}
+static int pci_create_attr(struct pci_dev *pdev, int num, int write_combine)
+{
+ /* allocate attribute structure, piggyback attribute name */
+ int name_len = write_combine ? 13 : 10;
+ struct bin_attribute *res_attr;
+ int retval;
+
+ res_attr = kzalloc(sizeof(*res_attr) + name_len, GFP_ATOMIC);
+ if (res_attr) {
+ char *res_attr_name = (char *)(res_attr + 1);
+
+ if (write_combine) {
+ pdev->res_attr_wc[num] = res_attr;
+ sprintf(res_attr_name, "resource%d_wc", num);
+ res_attr->mmap = pci_mmap_resource_wc;
+ } else {
+ pdev->res_attr[num] = res_attr;
+ sprintf(res_attr_name, "resource%d", num);
+ res_attr->mmap = pci_mmap_resource_uc;
+ }
+ res_attr->attr.name = res_attr_name;
+ res_attr->attr.mode = S_IRUSR | S_IWUSR;
+ res_attr->size = pci_resource_len(pdev, num);
+ res_attr->private = &pdev->resource[num];
+ retval = sysfs_create_bin_file(&pdev->dev.kobj, res_attr);
+ } else
+ retval = -ENOMEM;
+
+ return retval;
+}
+
/**
* pci_create_resource_files - create resource files in sysfs for @dev
* @dev: dev in question
@@ -557,31 +608,19 @@
/* Expose the PCI resources from this device as files */
for (i = 0; i < PCI_ROM_RESOURCE; i++) {
- struct bin_attribute *res_attr;
/* skip empty resources */
if (!pci_resource_len(pdev, i))
continue;
- /* allocate attribute structure, piggyback attribute name */
- res_attr = kzalloc(sizeof(*res_attr) + 10, GFP_ATOMIC);
- if (res_attr) {
- char *res_attr_name = (char *)(res_attr + 1);
+ retval = pci_create_attr(pdev, i, 0);
+ /* for prefetchable resources, create a WC mappable file */
+ if (!retval && pdev->resource[i].flags & IORESOURCE_PREFETCH)
+ retval = pci_create_attr(pdev, i, 1);
- pdev->res_attr[i] = res_attr;
- sprintf(res_attr_name, "resource%d", i);
- res_attr->attr.name = res_attr_name;
- res_attr->attr.mode = S_IRUSR | S_IWUSR;
- res_attr->size = pci_resource_len(pdev, i);
- res_attr->mmap = pci_mmap_resource;
- res_attr->private = &pdev->resource[i];
- retval = sysfs_create_bin_file(&pdev->dev.kobj, res_attr);
- if (retval) {
- pci_remove_resource_files(pdev);
- return retval;
- }
- } else {
- return -ENOMEM;
+ if (retval) {
+ pci_remove_resource_files(pdev);
+ return retval;
}
}
return 0;
diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c
index 61fedb24..f824955 100644
--- a/drivers/pci/pcie/aspm.c
+++ b/drivers/pci/pcie/aspm.c
@@ -506,6 +506,23 @@
pdev->link_state = NULL;
}
+static int pcie_aspm_sanity_check(struct pci_dev *pdev)
+{
+ struct pci_dev *child_dev;
+ int child_pos;
+
+ /*
+ * Some functions in a slot might not all be PCIE functions, very
+ * strange. Disable ASPM for the whole slot
+ */
+ list_for_each_entry(child_dev, &pdev->subordinate->devices, bus_list) {
+ child_pos = pci_find_capability(child_dev, PCI_CAP_ID_EXP);
+ if (!child_pos)
+ return -EINVAL;
+ }
+ return 0;
+}
+
/*
* pcie_aspm_init_link_state: Initiate PCI express link state.
* It is called after the pcie and its children devices are scaned.
@@ -526,6 +543,9 @@
if (list_empty(&pdev->subordinate->devices))
goto out;
+ if (pcie_aspm_sanity_check(pdev))
+ goto out;
+
mutex_lock(&aspm_lock);
link_state = kzalloc(sizeof(*link_state), GFP_KERNEL);
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index afd914e..dabb563 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -1503,8 +1503,7 @@
(f->device == dev->device || f->device == (u16) PCI_ANY_ID)) {
#ifdef DEBUG
dev_dbg(&dev->dev, "calling ");
- print_fn_descriptor_symbol("%s()\n",
- (unsigned long) f->hook);
+ print_fn_descriptor_symbol("%s\n", f->hook);
#endif
f->hook(dev);
}
@@ -1826,6 +1825,7 @@
}
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, nv_msi_ht_cap_quirk);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_ANY_ID, nv_msi_ht_cap_quirk);
static void __devinit quirk_msi_intx_disable_bug(struct pci_dev *dev)
{
diff --git a/drivers/pcmcia/electra_cf.c b/drivers/pcmcia/electra_cf.c
index 0a6cea1..52d0aa8 100644
--- a/drivers/pcmcia/electra_cf.c
+++ b/drivers/pcmcia/electra_cf.c
@@ -352,6 +352,7 @@
},
{},
};
+MODULE_DEVICE_TABLE(of, electra_cf_match);
static struct of_platform_driver electra_cf_driver = {
.name = (char *)driver_name,
diff --git a/drivers/pnp/base.h b/drivers/pnp/base.h
index 4fe7c58..886dac8 100644
--- a/drivers/pnp/base.h
+++ b/drivers/pnp/base.h
@@ -19,6 +19,7 @@
int pnp_add_card_device(struct pnp_card *card, struct pnp_dev *dev);
void pnp_remove_card_device(struct pnp_dev *dev);
+struct pnp_option *pnp_build_option(int priority);
struct pnp_option *pnp_register_independent_option(struct pnp_dev *dev);
struct pnp_option *pnp_register_dependent_option(struct pnp_dev *dev,
int priority);
diff --git a/drivers/pnp/interface.c b/drivers/pnp/interface.c
index 5d9301de..5695a79 100644
--- a/drivers/pnp/interface.c
+++ b/drivers/pnp/interface.c
@@ -424,7 +424,7 @@
start = simple_strtoul(buf, &buf, 0);
pnp_res = pnp_add_irq_resource(dev, start, 0);
if (pnp_res)
- nirq++;
+ pnp_res->index = nirq++;
continue;
}
if (!strnicmp(buf, "dma", 3)) {
diff --git a/drivers/pnp/pnpacpi/rsparser.c b/drivers/pnp/pnpacpi/rsparser.c
index 0201c8a..46c791a 100644
--- a/drivers/pnp/pnpacpi/rsparser.c
+++ b/drivers/pnp/pnpacpi/rsparser.c
@@ -50,15 +50,17 @@
flags = IORESOURCE_IRQ_HIGHEDGE;
}
- if (shareable)
+ if (shareable == ACPI_SHARED)
flags |= IORESOURCE_IRQ_SHAREABLE;
return flags;
}
-static void decode_irq_flags(int flag, int *triggering, int *polarity)
+static void decode_irq_flags(struct pnp_dev *dev, int flags, int *triggering,
+ int *polarity, int *shareable)
{
- switch (flag) {
+ switch (flags & (IORESOURCE_IRQ_LOWLEVEL | IORESOURCE_IRQ_HIGHLEVEL |
+ IORESOURCE_IRQ_LOWEDGE | IORESOURCE_IRQ_HIGHEDGE)) {
case IORESOURCE_IRQ_LOWLEVEL:
*triggering = ACPI_LEVEL_SENSITIVE;
*polarity = ACPI_ACTIVE_LOW;
@@ -75,7 +77,18 @@
*triggering = ACPI_EDGE_SENSITIVE;
*polarity = ACPI_ACTIVE_HIGH;
break;
+ default:
+ dev_err(&dev->dev, "can't encode invalid IRQ mode %#x\n",
+ flags);
+ *triggering = ACPI_EDGE_SENSITIVE;
+ *polarity = ACPI_ACTIVE_HIGH;
+ break;
}
+
+ if (flags & IORESOURCE_IRQ_SHAREABLE)
+ *shareable = ACPI_SHARED;
+ else
+ *shareable = ACPI_EXCLUSIVE;
}
static void pnpacpi_parse_allocated_irqresource(struct pnp_dev *dev,
@@ -742,6 +755,9 @@
if (pnpacpi_supported_resource(res)) {
(*resource)->type = res->type;
(*resource)->length = sizeof(struct acpi_resource);
+ if (res->type == ACPI_RESOURCE_TYPE_IRQ)
+ (*resource)->data.irq.descriptor_length =
+ res->data.irq.descriptor_length;
(*resource)++;
}
@@ -788,22 +804,21 @@
struct resource *p)
{
struct acpi_resource_irq *irq = &resource->data.irq;
- int triggering, polarity;
+ int triggering, polarity, shareable;
- decode_irq_flags(p->flags & IORESOURCE_BITS, &triggering, &polarity);
+ decode_irq_flags(dev, p->flags, &triggering, &polarity, &shareable);
irq->triggering = triggering;
irq->polarity = polarity;
- if (triggering == ACPI_EDGE_SENSITIVE)
- irq->sharable = ACPI_EXCLUSIVE;
- else
- irq->sharable = ACPI_SHARED;
+ irq->sharable = shareable;
irq->interrupt_count = 1;
irq->interrupts[0] = p->start;
- dev_dbg(&dev->dev, " encode irq %d %s %s %s\n", (int) p->start,
+ dev_dbg(&dev->dev, " encode irq %d %s %s %s (%d-byte descriptor)\n",
+ (int) p->start,
triggering == ACPI_LEVEL_SENSITIVE ? "level" : "edge",
polarity == ACPI_ACTIVE_LOW ? "low" : "high",
- irq->sharable == ACPI_SHARED ? "shared" : "exclusive");
+ irq->sharable == ACPI_SHARED ? "shared" : "exclusive",
+ irq->descriptor_length);
}
static void pnpacpi_encode_ext_irq(struct pnp_dev *dev,
@@ -811,16 +826,13 @@
struct resource *p)
{
struct acpi_resource_extended_irq *extended_irq = &resource->data.extended_irq;
- int triggering, polarity;
+ int triggering, polarity, shareable;
- decode_irq_flags(p->flags & IORESOURCE_BITS, &triggering, &polarity);
+ decode_irq_flags(dev, p->flags, &triggering, &polarity, &shareable);
extended_irq->producer_consumer = ACPI_CONSUMER;
extended_irq->triggering = triggering;
extended_irq->polarity = polarity;
- if (triggering == ACPI_EDGE_SENSITIVE)
- extended_irq->sharable = ACPI_EXCLUSIVE;
- else
- extended_irq->sharable = ACPI_SHARED;
+ extended_irq->sharable = shareable;
extended_irq->interrupt_count = 1;
extended_irq->interrupts[0] = p->start;
diff --git a/drivers/pnp/quirks.c b/drivers/pnp/quirks.c
index d049a22..1ff3bb5 100644
--- a/drivers/pnp/quirks.c
+++ b/drivers/pnp/quirks.c
@@ -111,6 +111,113 @@
dev_info(&dev->dev, "SB audio device quirk - increased port range\n");
}
+static struct pnp_option *quirk_isapnp_mpu_options(struct pnp_dev *dev)
+{
+ struct pnp_option *head = NULL;
+ struct pnp_option *prev = NULL;
+ struct pnp_option *res;
+
+ /*
+ * Build a functional IRQ-less variant of each MPU option.
+ */
+
+ for (res = dev->dependent; res; res = res->next) {
+ struct pnp_option *curr;
+ struct pnp_port *port;
+ struct pnp_port *copy;
+
+ port = res->port;
+ if (!port || !res->irq)
+ continue;
+
+ copy = pnp_alloc(sizeof *copy);
+ if (!copy)
+ break;
+
+ copy->min = port->min;
+ copy->max = port->max;
+ copy->align = port->align;
+ copy->size = port->size;
+ copy->flags = port->flags;
+
+ curr = pnp_build_option(PNP_RES_PRIORITY_FUNCTIONAL);
+ if (!curr) {
+ kfree(copy);
+ break;
+ }
+ curr->port = copy;
+
+ if (prev)
+ prev->next = curr;
+ else
+ head = curr;
+ prev = curr;
+ }
+ if (head)
+ dev_info(&dev->dev, "adding IRQ-less MPU options\n");
+
+ return head;
+}
+
+static void quirk_ad1815_mpu_resources(struct pnp_dev *dev)
+{
+ struct pnp_option *res;
+ struct pnp_irq *irq;
+
+ /*
+ * Distribute the independent IRQ over the dependent options
+ */
+
+ res = dev->independent;
+ if (!res)
+ return;
+
+ irq = res->irq;
+ if (!irq || irq->next)
+ return;
+
+ res = dev->dependent;
+ if (!res)
+ return;
+
+ while (1) {
+ struct pnp_irq *copy;
+
+ copy = pnp_alloc(sizeof *copy);
+ if (!copy)
+ break;
+
+ memcpy(copy->map, irq->map, sizeof copy->map);
+ copy->flags = irq->flags;
+
+ copy->next = res->irq; /* Yes, this is NULL */
+ res->irq = copy;
+
+ if (!res->next)
+ break;
+ res = res->next;
+ }
+ kfree(irq);
+
+ res->next = quirk_isapnp_mpu_options(dev);
+
+ res = dev->independent;
+ res->irq = NULL;
+}
+
+static void quirk_isapnp_mpu_resources(struct pnp_dev *dev)
+{
+ struct pnp_option *res;
+
+ res = dev->dependent;
+ if (!res)
+ return;
+
+ while (res->next)
+ res = res->next;
+
+ res->next = quirk_isapnp_mpu_options(dev);
+}
#include <linux/pci.h>
@@ -179,7 +286,7 @@
pci_name(pdev), i,
(unsigned long long) pci_start,
(unsigned long long) pci_end);
- res->flags = 0;
+ res->flags |= IORESOURCE_DISABLED;
}
}
}
@@ -205,6 +312,11 @@
{"CTL0043", quirk_sb16audio_resources},
{"CTL0044", quirk_sb16audio_resources},
{"CTL0045", quirk_sb16audio_resources},
+ /* Add IRQ-less MPU options */
+ {"ADS7151", quirk_ad1815_mpu_resources},
+ {"ADS7181", quirk_isapnp_mpu_resources},
+ {"AZT0002", quirk_isapnp_mpu_resources},
+ /* PnP resources that might overlap PCI BARs */
{"PNP0c01", quirk_system_pci_resources},
{"PNP0c02", quirk_system_pci_resources},
{""}
@@ -212,20 +324,15 @@
void pnp_fixup_device(struct pnp_dev *dev)
{
- int i = 0;
- void (*quirk)(struct pnp_dev *);
+ struct pnp_fixup *f;
- while (*pnp_fixups[i].id) {
- if (compare_pnp_id(dev->id, pnp_fixups[i].id)) {
- quirk = pnp_fixups[i].quirk_function;
-
+ for (f = pnp_fixups; *f->id; f++) {
+ if (!compare_pnp_id(dev->id, f->id))
+ continue;
#ifdef DEBUG
- dev_dbg(&dev->dev, "calling ");
- print_fn_descriptor_symbol("%s()\n",
- (unsigned long) *quirk);
+ dev_dbg(&dev->dev, "%s: calling ", f->id);
+ print_fn_descriptor_symbol("%s\n", f->quirk_function);
#endif
- (*quirk)(dev);
- }
- i++;
+ f->quirk_function(dev);
}
}
diff --git a/drivers/pnp/resource.c b/drivers/pnp/resource.c
index 2041620..390b500 100644
--- a/drivers/pnp/resource.c
+++ b/drivers/pnp/resource.c
@@ -28,7 +28,7 @@
* option registration
*/
-static struct pnp_option *pnp_build_option(int priority)
+struct pnp_option *pnp_build_option(int priority)
{
struct pnp_option *option = pnp_alloc(sizeof(struct pnp_option));
diff --git a/drivers/pnp/support.c b/drivers/pnp/support.c
index 3eba85e..95b076c 100644
--- a/drivers/pnp/support.c
+++ b/drivers/pnp/support.c
@@ -45,10 +45,10 @@
str[0] = 'A' + ((id >> 26) & 0x3f) - 1;
str[1] = 'A' + ((id >> 21) & 0x1f) - 1;
str[2] = 'A' + ((id >> 16) & 0x1f) - 1;
- str[3] = hex_asc((id >> 12) & 0xf);
- str[4] = hex_asc((id >> 8) & 0xf);
- str[5] = hex_asc((id >> 4) & 0xf);
- str[6] = hex_asc((id >> 0) & 0xf);
+ str[3] = hex_asc_hi(id >> 8);
+ str[4] = hex_asc_lo(id >> 8);
+ str[5] = hex_asc_hi(id);
+ str[6] = hex_asc_lo(id);
str[7] = '\0';
}
diff --git a/drivers/pnp/system.c b/drivers/pnp/system.c
index 9c2496d..cf4e07b 100644
--- a/drivers/pnp/system.c
+++ b/drivers/pnp/system.c
@@ -81,7 +81,7 @@
}
for (i = 0; (res = pnp_get_resource(dev, IORESOURCE_MEM, i)); i++) {
- if (res->flags & IORESOURCE_UNSET)
+ if (res->flags & (IORESOURCE_UNSET | IORESOURCE_DISABLED))
continue;
reserve_range(dev, res->start, res->end, 0);
diff --git a/drivers/power/power_supply_core.c b/drivers/power/power_supply_core.c
index 138dd76..af1633e 100644
--- a/drivers/power/power_supply_core.c
+++ b/drivers/power/power_supply_core.c
@@ -91,15 +91,13 @@
{
int rc = 0;
- psy->dev = device_create(power_supply_class, parent, 0,
- "%s", psy->name);
+ psy->dev = device_create_drvdata(power_supply_class, parent, 0,
+ psy, "%s", psy->name);
if (IS_ERR(psy->dev)) {
rc = PTR_ERR(psy->dev);
goto dev_create_failed;
}
- dev_set_drvdata(psy->dev, psy);
-
INIT_WORK(&psy->changed_work, power_supply_changed_work);
rc = power_supply_create_attrs(psy);
diff --git a/drivers/power/power_supply_sysfs.c b/drivers/power/power_supply_sysfs.c
index c444d6b..49215da 100644
--- a/drivers/power/power_supply_sysfs.c
+++ b/drivers/power/power_supply_sysfs.c
@@ -201,7 +201,7 @@
dev_dbg(dev, "uevent\n");
- if (!psy) {
+ if (!psy || !psy->dev) {
dev_dbg(dev, "No power supply yet\n");
return ret;
}
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 6cc2c03..4949dc4 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -256,6 +256,17 @@
This driver can also be built as a module. If so the module
will be called rtc-s35390a.
+config RTC_DRV_FM3130
+ tristate "Ramtron FM3130"
+ help
+ If you say Y here you will get support for the
+ Ramtron FM3130 RTC chips.
+ Ramtron FM3130 is a chip with two separate devices inside,
+ RTC clock and FRAM. This driver provides only RTC functionality.
+
+ This driver can also be built as a module. If so the module
+ will be called rtc-fm3130.
+
endif # I2C
comment "SPI RTC drivers"
@@ -534,4 +545,12 @@
help
If you say yes here you get support for the Ricoh RS5C313 RTC chips.
+config RTC_DRV_PPC
+ tristate "PowerPC machine dependent RTC support"
+ depends on PPC_MERGE
+ help
+ The PowerPC kernel has machine-specific functions for accessing
+ the RTC. This exposes that functionality through the generic RTC
+ class.
+
endif # RTC_CLASS
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index 872f1218f..b6e14d5 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -31,6 +31,7 @@
obj-$(CONFIG_RTC_DRV_DS1672) += rtc-ds1672.o
obj-$(CONFIG_RTC_DRV_DS1742) += rtc-ds1742.o
obj-$(CONFIG_RTC_DRV_EP93XX) += rtc-ep93xx.o
+obj-$(CONFIG_RTC_DRV_FM3130) += rtc-fm3130.o
obj-$(CONFIG_RTC_DRV_ISL1208) += rtc-isl1208.o
obj-$(CONFIG_RTC_DRV_M41T80) += rtc-m41t80.o
obj-$(CONFIG_RTC_DRV_M48T59) += rtc-m48t59.o
@@ -41,6 +42,7 @@
obj-$(CONFIG_RTC_DRV_PCF8563) += rtc-pcf8563.o
obj-$(CONFIG_RTC_DRV_PCF8583) += rtc-pcf8583.o
obj-$(CONFIG_RTC_DRV_PL031) += rtc-pl031.o
+obj-$(CONFIG_RTC_DRV_PPC) += rtc-ppc.o
obj-$(CONFIG_RTC_DRV_R9701) += rtc-r9701.o
obj-$(CONFIG_RTC_DRV_RS5C313) += rtc-rs5c313.o
obj-$(CONFIG_RTC_DRV_RS5C348) += rtc-rs5c348.o
diff --git a/drivers/rtc/rtc-at32ap700x.c b/drivers/rtc/rtc-at32ap700x.c
index 42244f1..2ef8cdf 100644
--- a/drivers/rtc/rtc-at32ap700x.c
+++ b/drivers/rtc/rtc-at32ap700x.c
@@ -94,8 +94,11 @@
{
struct rtc_at32ap700x *rtc = dev_get_drvdata(dev);
+ spin_lock_irq(&rtc->lock);
rtc_time_to_tm(rtc->alarm_time, &alrm->time);
- alrm->pending = rtc_readl(rtc, IMR) & RTC_BIT(IMR_TOPI) ? 1 : 0;
+ alrm->enabled = rtc_readl(rtc, IMR) & RTC_BIT(IMR_TOPI) ? 1 : 0;
+ alrm->pending = rtc_readl(rtc, ISR) & RTC_BIT(ISR_TOPI) ? 1 : 0;
+ spin_unlock_irq(&rtc->lock);
return 0;
}
@@ -119,7 +122,7 @@
spin_lock_irq(&rtc->lock);
rtc->alarm_time = alarm_unix_time;
rtc_writel(rtc, TOP, rtc->alarm_time);
- if (alrm->pending)
+ if (alrm->enabled)
rtc_writel(rtc, CTRL, rtc_readl(rtc, CTRL)
| RTC_BIT(CTRL_TOPEN));
else
diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c
index d060a06..d7bb9ba 100644
--- a/drivers/rtc/rtc-cmos.c
+++ b/drivers/rtc/rtc-cmos.c
@@ -905,19 +905,7 @@
.resume = cmos_pnp_resume,
};
-static int __init cmos_init(void)
-{
- return pnp_register_driver(&cmos_pnp_driver);
-}
-module_init(cmos_init);
-
-static void __exit cmos_exit(void)
-{
- pnp_unregister_driver(&cmos_pnp_driver);
-}
-module_exit(cmos_exit);
-
-#else /* no PNP */
+#endif /* CONFIG_PNP */
/*----------------------------------------------------------------*/
@@ -958,20 +946,33 @@
static int __init cmos_init(void)
{
+#ifdef CONFIG_PNP
+ if (pnp_platform_devices)
+ return pnp_register_driver(&cmos_pnp_driver);
+ else
+ return platform_driver_probe(&cmos_platform_driver,
+ cmos_platform_probe);
+#else
return platform_driver_probe(&cmos_platform_driver,
cmos_platform_probe);
+#endif /* CONFIG_PNP */
}
module_init(cmos_init);
static void __exit cmos_exit(void)
{
+#ifdef CONFIG_PNP
+ if (pnp_platform_devices)
+ pnp_unregister_driver(&cmos_pnp_driver);
+ else
+ platform_driver_unregister(&cmos_platform_driver);
+#else
platform_driver_unregister(&cmos_platform_driver);
+#endif /* CONFIG_PNP */
}
module_exit(cmos_exit);
-#endif /* !PNP */
-
MODULE_AUTHOR("David Brownell");
MODULE_DESCRIPTION("Driver for PC-style 'CMOS' RTCs");
MODULE_LICENSE("GPL");
diff --git a/drivers/rtc/rtc-ds1374.c b/drivers/rtc/rtc-ds1374.c
index fa2d2f8..640acd2 100644
--- a/drivers/rtc/rtc-ds1374.c
+++ b/drivers/rtc/rtc-ds1374.c
@@ -42,7 +42,7 @@
#define DS1374_REG_TCR 0x09 /* Trickle Charge */
static const struct i2c_device_id ds1374_id[] = {
- { "rtc-ds1374", 0 },
+ { "ds1374", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, ds1374_id);
diff --git a/drivers/rtc/rtc-fm3130.c b/drivers/rtc/rtc-fm3130.c
new file mode 100644
index 0000000..11644c8
--- /dev/null
+++ b/drivers/rtc/rtc-fm3130.c
@@ -0,0 +1,501 @@
+/*
+ * rtc-fm3130.c - RTC driver for Ramtron FM3130 I2C chip.
+ *
+ * Copyright (C) 2008 Sergey Lapin
+ * Based on ds1307 driver by James Chapman and David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/rtc.h>
+#include <linux/bcd.h>
+
+#define FM3130_RTC_CONTROL (0x0)
+#define FM3130_CAL_CONTROL (0x1)
+#define FM3130_RTC_SECONDS (0x2)
+#define FM3130_RTC_MINUTES (0x3)
+#define FM3130_RTC_HOURS (0x4)
+#define FM3130_RTC_DAY (0x5)
+#define FM3130_RTC_DATE (0x6)
+#define FM3130_RTC_MONTHS (0x7)
+#define FM3130_RTC_YEARS (0x8)
+
+#define FM3130_ALARM_SECONDS (0x9)
+#define FM3130_ALARM_MINUTES (0xa)
+#define FM3130_ALARM_HOURS (0xb)
+#define FM3130_ALARM_DATE (0xc)
+#define FM3130_ALARM_MONTHS (0xd)
+#define FM3130_ALARM_WP_CONTROL (0xe)
+
+#define FM3130_CAL_CONTROL_BIT_nOSCEN (1 << 7) /* Osciallator enabled */
+#define FM3130_RTC_CONTROL_BIT_LB (1 << 7) /* Low battery */
+#define FM3130_RTC_CONTROL_BIT_AF (1 << 6) /* Alarm flag */
+#define FM3130_RTC_CONTROL_BIT_CF (1 << 5) /* Century overflow */
+#define FM3130_RTC_CONTROL_BIT_POR (1 << 4) /* Power on reset */
+#define FM3130_RTC_CONTROL_BIT_AEN (1 << 3) /* Alarm enable */
+#define FM3130_RTC_CONTROL_BIT_CAL (1 << 2) /* Calibration mode */
+#define FM3130_RTC_CONTROL_BIT_WRITE (1 << 1) /* W=1 -> write mode W=0 normal */
+#define FM3130_RTC_CONTROL_BIT_READ (1 << 0) /* R=1 -> read mode R=0 normal */
+
+#define FM3130_CLOCK_REGS 7
+#define FM3130_ALARM_REGS 5
+
+struct fm3130 {
+ u8 reg_addr_time;
+ u8 reg_addr_alarm;
+ u8 regs[15];
+ struct i2c_msg msg[4];
+ struct i2c_client *client;
+ struct rtc_device *rtc;
+ int data_valid;
+ int alarm;
+};
+static const struct i2c_device_id fm3130_id[] = {
+ { "fm3130-rtc", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, fm3130_id);
+
+#define FM3130_MODE_NORMAL 0
+#define FM3130_MODE_WRITE 1
+#define FM3130_MODE_READ 2
+
+static void fm3130_rtc_mode(struct device *dev, int mode)
+{
+ struct fm3130 *fm3130 = dev_get_drvdata(dev);
+
+ fm3130->regs[FM3130_RTC_CONTROL] =
+ i2c_smbus_read_byte_data(fm3130->client, FM3130_RTC_CONTROL);
+ switch (mode) {
+ case FM3130_MODE_NORMAL:
+ fm3130->regs[FM3130_RTC_CONTROL] &=
+ ~(FM3130_RTC_CONTROL_BIT_WRITE |
+ FM3130_RTC_CONTROL_BIT_READ);
+ break;
+ case FM3130_MODE_WRITE:
+ fm3130->regs[FM3130_RTC_CONTROL] |= FM3130_RTC_CONTROL_BIT_WRITE;
+ break;
+ case FM3130_MODE_READ:
+ fm3130->regs[FM3130_RTC_CONTROL] |= FM3130_RTC_CONTROL_BIT_READ;
+ break;
+ default:
+ dev_dbg(dev, "invalid mode %d\n", mode);
+ break;
+ }
+ /* Checking for alarm */
+ if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_AF) {
+ fm3130->alarm = 1;
+ fm3130->regs[FM3130_RTC_CONTROL] &= ~FM3130_RTC_CONTROL_BIT_AF;
+ }
+ i2c_smbus_write_byte_data(fm3130->client,
+ FM3130_RTC_CONTROL, fm3130->regs[FM3130_RTC_CONTROL]);
+}
+
+static int fm3130_get_time(struct device *dev, struct rtc_time *t)
+{
+ struct fm3130 *fm3130 = dev_get_drvdata(dev);
+ int tmp;
+
+ if (!fm3130->data_valid) {
+ /* We have invalid data in RTC, probably due
+ to battery faults or other problems. Return EIO
+ for now, it will allow us to set data later insted
+ of error during probing which disables device */
+ return -EIO;
+ }
+ fm3130_rtc_mode(dev, FM3130_MODE_READ);
+
+ /* read the RTC date and time registers all at once */
+ tmp = i2c_transfer(to_i2c_adapter(fm3130->client->dev.parent),
+ fm3130->msg, 2);
+ if (tmp != 2) {
+ dev_err(dev, "%s error %d\n", "read", tmp);
+ return -EIO;
+ }
+
+ fm3130_rtc_mode(dev, FM3130_MODE_NORMAL);
+
+ dev_dbg(dev, "%s: %02x %02x %02x %02x %02x %02x %02x %02x"
+ "%02x %02x %02x %02x %02x %02x %02x\n",
+ "read",
+ fm3130->regs[0], fm3130->regs[1],
+ fm3130->regs[2], fm3130->regs[3],
+ fm3130->regs[4], fm3130->regs[5],
+ fm3130->regs[6], fm3130->regs[7],
+ fm3130->regs[8], fm3130->regs[9],
+ fm3130->regs[0xa], fm3130->regs[0xb],
+ fm3130->regs[0xc], fm3130->regs[0xd],
+ fm3130->regs[0xe]);
+
+ t->tm_sec = BCD2BIN(fm3130->regs[FM3130_RTC_SECONDS] & 0x7f);
+ t->tm_min = BCD2BIN(fm3130->regs[FM3130_RTC_MINUTES] & 0x7f);
+ tmp = fm3130->regs[FM3130_RTC_HOURS] & 0x3f;
+ t->tm_hour = BCD2BIN(tmp);
+ t->tm_wday = BCD2BIN(fm3130->regs[FM3130_RTC_DAY] & 0x07) - 1;
+ t->tm_mday = BCD2BIN(fm3130->regs[FM3130_RTC_DATE] & 0x3f);
+ tmp = fm3130->regs[FM3130_RTC_MONTHS] & 0x1f;
+ t->tm_mon = BCD2BIN(tmp) - 1;
+
+ /* assume 20YY not 19YY, and ignore CF bit */
+ t->tm_year = BCD2BIN(fm3130->regs[FM3130_RTC_YEARS]) + 100;
+
+ dev_dbg(dev, "%s secs=%d, mins=%d, "
+ "hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n",
+ "read", t->tm_sec, t->tm_min,
+ t->tm_hour, t->tm_mday,
+ t->tm_mon, t->tm_year, t->tm_wday);
+
+ /* initial clock setting can be undefined */
+ return rtc_valid_tm(t);
+}
+
+
+static int fm3130_set_time(struct device *dev, struct rtc_time *t)
+{
+ struct fm3130 *fm3130 = dev_get_drvdata(dev);
+ int tmp, i;
+ u8 *buf = fm3130->regs;
+
+ dev_dbg(dev, "%s secs=%d, mins=%d, "
+ "hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n",
+ "write", t->tm_sec, t->tm_min,
+ t->tm_hour, t->tm_mday,
+ t->tm_mon, t->tm_year, t->tm_wday);
+
+ /* first register addr */
+ buf[FM3130_RTC_SECONDS] = BIN2BCD(t->tm_sec);
+ buf[FM3130_RTC_MINUTES] = BIN2BCD(t->tm_min);
+ buf[FM3130_RTC_HOURS] = BIN2BCD(t->tm_hour);
+ buf[FM3130_RTC_DAY] = BIN2BCD(t->tm_wday + 1);
+ buf[FM3130_RTC_DATE] = BIN2BCD(t->tm_mday);
+ buf[FM3130_RTC_MONTHS] = BIN2BCD(t->tm_mon + 1);
+
+ /* assume 20YY not 19YY */
+ tmp = t->tm_year - 100;
+ buf[FM3130_RTC_YEARS] = BIN2BCD(tmp);
+
+ dev_dbg(dev, "%s: %02x %02x %02x %02x %02x %02x %02x"
+ "%02x %02x %02x %02x %02x %02x %02x %02x\n",
+ "write", buf[0], buf[1], buf[2], buf[3],
+ buf[4], buf[5], buf[6], buf[7],
+ buf[8], buf[9], buf[0xa], buf[0xb],
+ buf[0xc], buf[0xd], buf[0xe]);
+
+ fm3130_rtc_mode(dev, FM3130_MODE_WRITE);
+
+ /* Writing time registers, we don't support multibyte transfers */
+ for (i = 0; i < FM3130_CLOCK_REGS; i++) {
+ i2c_smbus_write_byte_data(fm3130->client,
+ FM3130_RTC_SECONDS + i,
+ fm3130->regs[FM3130_RTC_SECONDS + i]);
+ }
+
+ fm3130_rtc_mode(dev, FM3130_MODE_NORMAL);
+
+ /* We assume here that data are valid once written */
+ if (!fm3130->data_valid)
+ fm3130->data_valid = 1;
+ return 0;
+}
+
+static int fm3130_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+ struct fm3130 *fm3130 = dev_get_drvdata(dev);
+ int tmp;
+ struct rtc_time *tm = &alrm->time;
+ /* read the RTC alarm registers all at once */
+ tmp = i2c_transfer(to_i2c_adapter(fm3130->client->dev.parent),
+ &fm3130->msg[2], 2);
+ if (tmp != 2) {
+ dev_err(dev, "%s error %d\n", "read", tmp);
+ return -EIO;
+ }
+ dev_dbg(dev, "alarm read %02x %02x %02x %02x %02x\n",
+ fm3130->regs[FM3130_ALARM_SECONDS],
+ fm3130->regs[FM3130_ALARM_MINUTES],
+ fm3130->regs[FM3130_ALARM_HOURS],
+ fm3130->regs[FM3130_ALARM_DATE],
+ fm3130->regs[FM3130_ALARM_MONTHS]);
+
+
+ tm->tm_sec = BCD2BIN(fm3130->regs[FM3130_ALARM_SECONDS] & 0x7F);
+ tm->tm_min = BCD2BIN(fm3130->regs[FM3130_ALARM_MINUTES] & 0x7F);
+ tm->tm_hour = BCD2BIN(fm3130->regs[FM3130_ALARM_HOURS] & 0x3F);
+ tm->tm_mday = BCD2BIN(fm3130->regs[FM3130_ALARM_DATE] & 0x3F);
+ tm->tm_mon = BCD2BIN(fm3130->regs[FM3130_ALARM_MONTHS] & 0x1F);
+ if (tm->tm_mon > 0)
+ tm->tm_mon -= 1; /* RTC is 1-12, tm_mon is 0-11 */
+ dev_dbg(dev, "%s secs=%d, mins=%d, "
+ "hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n",
+ "read alarm", tm->tm_sec, tm->tm_min,
+ tm->tm_hour, tm->tm_mday,
+ tm->tm_mon, tm->tm_year, tm->tm_wday);
+
+ return 0;
+}
+
+static int fm3130_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+ struct fm3130 *fm3130 = dev_get_drvdata(dev);
+ struct rtc_time *tm = &alrm->time;
+ int i;
+
+ dev_dbg(dev, "%s secs=%d, mins=%d, "
+ "hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n",
+ "write alarm", tm->tm_sec, tm->tm_min,
+ tm->tm_hour, tm->tm_mday,
+ tm->tm_mon, tm->tm_year, tm->tm_wday);
+
+ if (tm->tm_sec != -1)
+ fm3130->regs[FM3130_ALARM_SECONDS] =
+ BIN2BCD(tm->tm_sec) | 0x80;
+
+ if (tm->tm_min != -1)
+ fm3130->regs[FM3130_ALARM_MINUTES] =
+ BIN2BCD(tm->tm_min) | 0x80;
+
+ if (tm->tm_hour != -1)
+ fm3130->regs[FM3130_ALARM_HOURS] =
+ BIN2BCD(tm->tm_hour) | 0x80;
+
+ if (tm->tm_mday != -1)
+ fm3130->regs[FM3130_ALARM_DATE] =
+ BIN2BCD(tm->tm_mday) | 0x80;
+
+ if (tm->tm_mon != -1)
+ fm3130->regs[FM3130_ALARM_MONTHS] =
+ BIN2BCD(tm->tm_mon + 1) | 0x80;
+
+ dev_dbg(dev, "alarm write %02x %02x %02x %02x %02x\n",
+ fm3130->regs[FM3130_ALARM_SECONDS],
+ fm3130->regs[FM3130_ALARM_MINUTES],
+ fm3130->regs[FM3130_ALARM_HOURS],
+ fm3130->regs[FM3130_ALARM_DATE],
+ fm3130->regs[FM3130_ALARM_MONTHS]);
+ /* Writing time registers, we don't support multibyte transfers */
+ for (i = 0; i < FM3130_ALARM_REGS; i++) {
+ i2c_smbus_write_byte_data(fm3130->client,
+ FM3130_ALARM_SECONDS + i,
+ fm3130->regs[FM3130_ALARM_SECONDS + i]);
+ }
+ fm3130->regs[FM3130_RTC_CONTROL] =
+ i2c_smbus_read_byte_data(fm3130->client, FM3130_RTC_CONTROL);
+ /* Checking for alarm */
+ if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_AF) {
+ fm3130->alarm = 1;
+ fm3130->regs[FM3130_RTC_CONTROL] &= ~FM3130_RTC_CONTROL_BIT_AF;
+ }
+ if (alrm->enabled) {
+ i2c_smbus_write_byte_data(fm3130->client, FM3130_RTC_CONTROL,
+ (fm3130->regs[FM3130_RTC_CONTROL] &
+ ~(FM3130_RTC_CONTROL_BIT_CAL)) |
+ FM3130_RTC_CONTROL_BIT_AEN);
+ } else {
+ i2c_smbus_write_byte_data(fm3130->client, FM3130_RTC_CONTROL,
+ fm3130->regs[FM3130_RTC_CONTROL] &
+ ~(FM3130_RTC_CONTROL_BIT_AEN));
+ }
+ return 0;
+}
+
+static const struct rtc_class_ops fm3130_rtc_ops = {
+ .read_time = fm3130_get_time,
+ .set_time = fm3130_set_time,
+ .read_alarm = fm3130_read_alarm,
+ .set_alarm = fm3130_set_alarm,
+};
+
+static struct i2c_driver fm3130_driver;
+
+static int __devinit fm3130_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct fm3130 *fm3130;
+ int err = -ENODEV;
+ int tmp;
+ struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
+
+ if (!i2c_check_functionality(adapter,
+ I2C_FUNC_I2C | I2C_FUNC_SMBUS_WRITE_BYTE_DATA))
+ return -EIO;
+
+ fm3130 = kzalloc(sizeof(struct fm3130), GFP_KERNEL);
+
+ if (!fm3130)
+ return -ENOMEM;
+
+ fm3130->client = client;
+ i2c_set_clientdata(client, fm3130);
+ fm3130->reg_addr_time = FM3130_RTC_SECONDS;
+ fm3130->reg_addr_alarm = FM3130_ALARM_SECONDS;
+
+ /* Messages to read time */
+ fm3130->msg[0].addr = client->addr;
+ fm3130->msg[0].flags = 0;
+ fm3130->msg[0].len = 1;
+ fm3130->msg[0].buf = &fm3130->reg_addr_time;
+
+ fm3130->msg[1].addr = client->addr;
+ fm3130->msg[1].flags = I2C_M_RD;
+ fm3130->msg[1].len = FM3130_CLOCK_REGS;
+ fm3130->msg[1].buf = &fm3130->regs[FM3130_RTC_SECONDS];
+
+ /* Messages to read alarm */
+ fm3130->msg[2].addr = client->addr;
+ fm3130->msg[2].flags = 0;
+ fm3130->msg[2].len = 1;
+ fm3130->msg[2].buf = &fm3130->reg_addr_alarm;
+
+ fm3130->msg[3].addr = client->addr;
+ fm3130->msg[3].flags = I2C_M_RD;
+ fm3130->msg[3].len = FM3130_ALARM_REGS;
+ fm3130->msg[3].buf = &fm3130->regs[FM3130_ALARM_SECONDS];
+
+ fm3130->data_valid = 0;
+
+ tmp = i2c_transfer(adapter, fm3130->msg, 4);
+ if (tmp != 4) {
+ pr_debug("read error %d\n", tmp);
+ err = -EIO;
+ goto exit_free;
+ }
+
+ fm3130->regs[FM3130_RTC_CONTROL] =
+ i2c_smbus_read_byte_data(client, FM3130_RTC_CONTROL);
+ fm3130->regs[FM3130_CAL_CONTROL] =
+ i2c_smbus_read_byte_data(client, FM3130_CAL_CONTROL);
+
+ /* Checking for alarm */
+ if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_AF) {
+ fm3130->alarm = 1;
+ fm3130->regs[FM3130_RTC_CONTROL] &= ~FM3130_RTC_CONTROL_BIT_AF;
+ }
+
+ /* Disabling calibration mode */
+ if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_CAL)
+ i2c_smbus_write_byte_data(client, FM3130_RTC_CONTROL,
+ fm3130->regs[FM3130_RTC_CONTROL] &
+ ~(FM3130_RTC_CONTROL_BIT_CAL));
+ dev_warn(&client->dev, "Disabling calibration mode!\n");
+
+ /* Disabling read and write modes */
+ if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_WRITE ||
+ fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_READ)
+ i2c_smbus_write_byte_data(client, FM3130_RTC_CONTROL,
+ fm3130->regs[FM3130_RTC_CONTROL] &
+ ~(FM3130_RTC_CONTROL_BIT_READ |
+ FM3130_RTC_CONTROL_BIT_WRITE));
+ dev_warn(&client->dev, "Disabling READ or WRITE mode!\n");
+
+ /* oscillator off? turn it on, so clock can tick. */
+ if (fm3130->regs[FM3130_CAL_CONTROL] & FM3130_CAL_CONTROL_BIT_nOSCEN)
+ i2c_smbus_write_byte_data(client, FM3130_CAL_CONTROL,
+ fm3130->regs[FM3130_CAL_CONTROL] &
+ ~(FM3130_CAL_CONTROL_BIT_nOSCEN));
+
+ /* oscillator fault? clear flag, and warn */
+ if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_LB)
+ dev_warn(&client->dev, "Low battery!\n");
+
+ /* oscillator fault? clear flag, and warn */
+ if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_POR) {
+ i2c_smbus_write_byte_data(client, FM3130_RTC_CONTROL,
+ fm3130->regs[FM3130_RTC_CONTROL] &
+ ~FM3130_RTC_CONTROL_BIT_POR);
+ dev_warn(&client->dev, "SET TIME!\n");
+ }
+ /* ACS is controlled by alarm */
+ i2c_smbus_write_byte_data(client, FM3130_ALARM_WP_CONTROL, 0x80);
+
+ /* TODO */
+ /* TODO need to sanity check alarm */
+ tmp = fm3130->regs[FM3130_RTC_SECONDS];
+ tmp = BCD2BIN(tmp & 0x7f);
+ if (tmp > 60)
+ goto exit_bad;
+ tmp = BCD2BIN(fm3130->regs[FM3130_RTC_MINUTES] & 0x7f);
+ if (tmp > 60)
+ goto exit_bad;
+
+ tmp = BCD2BIN(fm3130->regs[FM3130_RTC_DATE] & 0x3f);
+ if (tmp == 0 || tmp > 31)
+ goto exit_bad;
+
+ tmp = BCD2BIN(fm3130->regs[FM3130_RTC_MONTHS] & 0x1f);
+ if (tmp == 0 || tmp > 12)
+ goto exit_bad;
+
+ tmp = fm3130->regs[FM3130_RTC_HOURS];
+
+ fm3130->data_valid = 1;
+
+exit_bad:
+ if (!fm3130->data_valid)
+ dev_dbg(&client->dev,
+ "%s: %02x %02x %02x %02x %02x %02x %02x %02x"
+ "%02x %02x %02x %02x %02x %02x %02x\n",
+ "bogus registers",
+ fm3130->regs[0], fm3130->regs[1],
+ fm3130->regs[2], fm3130->regs[3],
+ fm3130->regs[4], fm3130->regs[5],
+ fm3130->regs[6], fm3130->regs[7],
+ fm3130->regs[8], fm3130->regs[9],
+ fm3130->regs[0xa], fm3130->regs[0xb],
+ fm3130->regs[0xc], fm3130->regs[0xd],
+ fm3130->regs[0xe]);
+
+ /* We won't bail out here because we just got invalid data.
+ Time setting from u-boot doesn't work anyway */
+ fm3130->rtc = rtc_device_register(client->name, &client->dev,
+ &fm3130_rtc_ops, THIS_MODULE);
+ if (IS_ERR(fm3130->rtc)) {
+ err = PTR_ERR(fm3130->rtc);
+ dev_err(&client->dev,
+ "unable to register the class device\n");
+ goto exit_free;
+ }
+ return 0;
+exit_free:
+ kfree(fm3130);
+ return err;
+}
+
+static int __devexit fm3130_remove(struct i2c_client *client)
+{
+ struct fm3130 *fm3130 = i2c_get_clientdata(client);
+
+ rtc_device_unregister(fm3130->rtc);
+ kfree(fm3130);
+ return 0;
+}
+
+static struct i2c_driver fm3130_driver = {
+ .driver = {
+ .name = "rtc-fm3130",
+ .owner = THIS_MODULE,
+ },
+ .probe = fm3130_probe,
+ .remove = __devexit_p(fm3130_remove),
+ .id_table = fm3130_id,
+};
+
+static int __init fm3130_init(void)
+{
+ return i2c_add_driver(&fm3130_driver);
+}
+module_init(fm3130_init);
+
+static void __exit fm3130_exit(void)
+{
+ i2c_del_driver(&fm3130_driver);
+}
+module_exit(fm3130_exit);
+
+MODULE_DESCRIPTION("RTC driver for FM3130");
+MODULE_AUTHOR("Sergey Lapin <slapin@ossfans.org>");
+MODULE_LICENSE("GPL");
+
diff --git a/drivers/rtc/rtc-lib.c b/drivers/rtc/rtc-lib.c
index ba795a4..9f996ec 100644
--- a/drivers/rtc/rtc-lib.c
+++ b/drivers/rtc/rtc-lib.c
@@ -51,7 +51,7 @@
*/
void rtc_time_to_tm(unsigned long time, struct rtc_time *tm)
{
- register int days, month, year;
+ unsigned int days, month, year;
days = time / 86400;
time -= days * 86400;
diff --git a/drivers/rtc/rtc-m41t80.c b/drivers/rtc/rtc-m41t80.c
index 316bfaa..a3e0880 100644
--- a/drivers/rtc/rtc-m41t80.c
+++ b/drivers/rtc/rtc-m41t80.c
@@ -15,6 +15,7 @@
#include <linux/module.h>
#include <linux/init.h>
+#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/i2c.h>
@@ -803,6 +804,7 @@
#ifdef CONFIG_RTC_DRV_M41T80_WDT
if (clientdata->features & M41T80_FEATURE_HT) {
+ save_client = client;
rc = misc_register(&wdt_dev);
if (rc)
goto exit;
@@ -811,7 +813,6 @@
misc_deregister(&wdt_dev);
goto exit;
}
- save_client = client;
}
#endif
return 0;
diff --git a/drivers/rtc/rtc-ppc.c b/drivers/rtc/rtc-ppc.c
new file mode 100644
index 0000000..c8e97e2
--- /dev/null
+++ b/drivers/rtc/rtc-ppc.c
@@ -0,0 +1,69 @@
+/*
+ * RTC driver for ppc_md RTC functions
+ *
+ * © 2007 Red Hat, Inc.
+ *
+ * Author: David Woodhouse <dwmw2@infradead.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/rtc.h>
+#include <linux/platform_device.h>
+#include <asm/machdep.h>
+
+static int ppc_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+ ppc_md.get_rtc_time(tm);
+ return 0;
+}
+
+static int ppc_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+ return ppc_md.set_rtc_time(tm);
+}
+
+static const struct rtc_class_ops ppc_rtc_ops = {
+ .set_time = ppc_rtc_set_time,
+ .read_time = ppc_rtc_read_time,
+};
+
+static struct rtc_device *rtc;
+static struct platform_device *ppc_rtc_pdev;
+
+static int __init ppc_rtc_init(void)
+{
+ if (!ppc_md.get_rtc_time || !ppc_md.set_rtc_time)
+ return -ENODEV;
+
+ ppc_rtc_pdev = platform_device_register_simple("ppc-rtc", 0, NULL, 0);
+ if (IS_ERR(ppc_rtc_pdev))
+ return PTR_ERR(ppc_rtc_pdev);
+
+ rtc = rtc_device_register("ppc_md", &ppc_rtc_pdev->dev,
+ &ppc_rtc_ops, THIS_MODULE);
+ if (IS_ERR(rtc)) {
+ platform_device_unregister(ppc_rtc_pdev);
+ return PTR_ERR(rtc);
+ }
+
+ return 0;
+}
+
+static void __exit ppc_rtc_exit(void)
+{
+ rtc_device_unregister(rtc);
+ platform_device_unregister(ppc_rtc_pdev);
+}
+
+module_init(ppc_rtc_init);
+module_exit(ppc_rtc_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>");
+MODULE_DESCRIPTION("Generic RTC class driver for PowerPC");
diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c
index ac6d4d3..1a40256 100644
--- a/drivers/s390/block/dasd.c
+++ b/drivers/s390/block/dasd.c
@@ -63,6 +63,7 @@
*/
static wait_queue_head_t dasd_init_waitq;
static wait_queue_head_t dasd_flush_wq;
+static wait_queue_head_t generic_waitq;
/*
* Allocate memory for a new device structure.
@@ -925,6 +926,8 @@
struct dasd_ccw_req *cqr;
struct dasd_device *device;
+ if (!intparm)
+ return;
cqr = (struct dasd_ccw_req *) intparm;
if (cqr->status != DASD_CQR_IN_IO) {
MESSAGE(KERN_DEBUG,
@@ -976,17 +979,16 @@
if (IS_ERR(irb)) {
switch (PTR_ERR(irb)) {
case -EIO:
- dasd_handle_killed_request(cdev, intparm);
break;
case -ETIMEDOUT:
printk(KERN_WARNING"%s(%s): request timed out\n",
__func__, cdev->dev.bus_id);
- //FIXME - dasd uses own timeout interface...
break;
default:
printk(KERN_WARNING"%s(%s): unknown error %ld\n",
__func__, cdev->dev.bus_id, PTR_ERR(irb));
}
+ dasd_handle_killed_request(cdev, intparm);
return;
}
@@ -1150,11 +1152,15 @@
struct list_head *l, *n;
struct dasd_ccw_req *cqr;
struct dasd_block *block;
+ void (*callback)(struct dasd_ccw_req *, void *data);
+ void *callback_data;
list_for_each_safe(l, n, final_queue) {
cqr = list_entry(l, struct dasd_ccw_req, devlist);
list_del_init(&cqr->devlist);
block = cqr->block;
+ callback = cqr->callback;
+ callback_data = cqr->callback_data;
if (block)
spin_lock_bh(&block->queue_lock);
switch (cqr->status) {
@@ -1175,7 +1181,7 @@
BUG();
}
if (cqr->callback != NULL)
- (cqr->callback)(cqr, cqr->callback_data);
+ (callback)(cqr, callback_data);
if (block)
spin_unlock_bh(&block->queue_lock);
}
@@ -1405,17 +1411,15 @@
*/
int dasd_sleep_on(struct dasd_ccw_req *cqr)
{
- wait_queue_head_t wait_q;
struct dasd_device *device;
int rc;
device = cqr->startdev;
- init_waitqueue_head (&wait_q);
cqr->callback = dasd_wakeup_cb;
- cqr->callback_data = (void *) &wait_q;
+ cqr->callback_data = (void *) &generic_waitq;
dasd_add_request_tail(cqr);
- wait_event(wait_q, _wait_for_wakeup(cqr));
+ wait_event(generic_waitq, _wait_for_wakeup(cqr));
/* Request status is either done or failed. */
rc = (cqr->status == DASD_CQR_DONE) ? 0 : -EIO;
@@ -1428,20 +1432,18 @@
*/
int dasd_sleep_on_interruptible(struct dasd_ccw_req *cqr)
{
- wait_queue_head_t wait_q;
struct dasd_device *device;
int rc;
device = cqr->startdev;
- init_waitqueue_head (&wait_q);
cqr->callback = dasd_wakeup_cb;
- cqr->callback_data = (void *) &wait_q;
+ cqr->callback_data = (void *) &generic_waitq;
dasd_add_request_tail(cqr);
- rc = wait_event_interruptible(wait_q, _wait_for_wakeup(cqr));
+ rc = wait_event_interruptible(generic_waitq, _wait_for_wakeup(cqr));
if (rc == -ERESTARTSYS) {
dasd_cancel_req(cqr);
/* wait (non-interruptible) for final status */
- wait_event(wait_q, _wait_for_wakeup(cqr));
+ wait_event(generic_waitq, _wait_for_wakeup(cqr));
}
rc = (cqr->status == DASD_CQR_DONE) ? 0 : -EIO;
return rc;
@@ -1465,7 +1467,6 @@
int dasd_sleep_on_immediatly(struct dasd_ccw_req *cqr)
{
- wait_queue_head_t wait_q;
struct dasd_device *device;
int rc;
@@ -1477,9 +1478,8 @@
return rc;
}
- init_waitqueue_head (&wait_q);
cqr->callback = dasd_wakeup_cb;
- cqr->callback_data = (void *) &wait_q;
+ cqr->callback_data = (void *) &generic_waitq;
cqr->status = DASD_CQR_QUEUED;
list_add(&cqr->devlist, &device->ccw_queue);
@@ -1488,7 +1488,7 @@
spin_unlock_irq(get_ccwdev_lock(device->cdev));
- wait_event(wait_q, _wait_for_wakeup(cqr));
+ wait_event(generic_waitq, _wait_for_wakeup(cqr));
/* Request status is either done or failed. */
rc = (cqr->status == DASD_CQR_DONE) ? 0 : -EIO;
@@ -2429,6 +2429,7 @@
init_waitqueue_head(&dasd_init_waitq);
init_waitqueue_head(&dasd_flush_wq);
+ init_waitqueue_head(&generic_waitq);
/* register 'common' DASD debug area, used for all DBF_XXX calls */
dasd_debug_area = debug_register("dasd", 1, 1, 8 * sizeof(long));
diff --git a/drivers/s390/block/dasd_devmap.c b/drivers/s390/block/dasd_devmap.c
index f4fb402..d774e79 100644
--- a/drivers/s390/block/dasd_devmap.c
+++ b/drivers/s390/block/dasd_devmap.c
@@ -86,10 +86,10 @@
static struct list_head dasd_hashlists[256];
int dasd_max_devindex;
-static struct dasd_devmap *dasd_add_busid(char *, int);
+static struct dasd_devmap *dasd_add_busid(const char *, int);
static inline int
-dasd_hash_busid(char *bus_id)
+dasd_hash_busid(const char *bus_id)
{
int hash, i;
@@ -394,7 +394,7 @@
* devices.
*/
static struct dasd_devmap *
-dasd_add_busid(char *bus_id, int features)
+dasd_add_busid(const char *bus_id, int features)
{
struct dasd_devmap *devmap, *new, *tmp;
int hash;
@@ -430,7 +430,7 @@
* Find devmap for device with given bus_id.
*/
static struct dasd_devmap *
-dasd_find_busid(char *bus_id)
+dasd_find_busid(const char *bus_id)
{
struct dasd_devmap *devmap, *tmp;
int hash;
@@ -452,7 +452,7 @@
* Check if busid has been added to the list of dasd ranges.
*/
int
-dasd_busid_known(char *bus_id)
+dasd_busid_known(const char *bus_id)
{
return IS_ERR(dasd_find_busid(bus_id)) ? -ENOENT : 0;
}
diff --git a/drivers/s390/block/dasd_int.h b/drivers/s390/block/dasd_int.h
index 6c624bf..fb2f931 100644
--- a/drivers/s390/block/dasd_int.h
+++ b/drivers/s390/block/dasd_int.h
@@ -598,7 +598,7 @@
struct dasd_device *dasd_device_from_devindex(int);
int dasd_parse(void);
-int dasd_busid_known(char *);
+int dasd_busid_known(const char *);
/* externals in dasd_gendisk.c */
int dasd_gendisk_init(void);
diff --git a/drivers/s390/char/raw3270.c b/drivers/s390/char/raw3270.c
index 0d98f1f..848ef7e 100644
--- a/drivers/s390/char/raw3270.c
+++ b/drivers/s390/char/raw3270.c
@@ -549,7 +549,6 @@
struct raw3270_request *rq)
{
unsigned long flags;
- wait_queue_head_t wq;
int rc;
#ifdef CONFIG_TN3270_CONSOLE
@@ -566,20 +565,20 @@
return rq->rc;
}
#endif
- init_waitqueue_head(&wq);
rq->callback = raw3270_wake_init;
- rq->callback_data = &wq;
+ rq->callback_data = &raw3270_wait_queue;
spin_lock_irqsave(get_ccwdev_lock(view->dev->cdev), flags);
rc = __raw3270_start(rp, view, rq);
spin_unlock_irqrestore(get_ccwdev_lock(view->dev->cdev), flags);
if (rc)
return rc;
/* Now wait for the completion. */
- rc = wait_event_interruptible(wq, raw3270_request_final(rq));
+ rc = wait_event_interruptible(raw3270_wait_queue,
+ raw3270_request_final(rq));
if (rc == -ERESTARTSYS) { /* Interrupted by a signal. */
raw3270_halt_io(view->dev, rq);
/* No wait for the halt to complete. */
- wait_event(wq, raw3270_request_final(rq));
+ wait_event(raw3270_wait_queue, raw3270_request_final(rq));
return -ERESTARTSYS;
}
return rq->rc;
diff --git a/drivers/s390/char/sclp_config.c b/drivers/s390/char/sclp_config.c
index 9e784d5..ad05a87 100644
--- a/drivers/s390/char/sclp_config.c
+++ b/drivers/s390/char/sclp_config.c
@@ -40,7 +40,7 @@
put_online_cpus();
}
-static void sclp_cpu_change_notify(struct work_struct *work)
+static void __ref sclp_cpu_change_notify(struct work_struct *work)
{
smp_rescan_cpus();
}
diff --git a/drivers/s390/char/sclp_vt220.c b/drivers/s390/char/sclp_vt220.c
index 35707c0..3e577f6 100644
--- a/drivers/s390/char/sclp_vt220.c
+++ b/drivers/s390/char/sclp_vt220.c
@@ -71,9 +71,6 @@
/* Number of requests in outqueue */
static int sclp_vt220_outqueue_count;
-/* Wait queue used to delay write requests while we've run out of buffers */
-static wait_queue_head_t sclp_vt220_waitq;
-
/* Timer used for delaying write requests to merge subsequent messages into
* a single buffer */
static struct timer_list sclp_vt220_timer;
@@ -133,7 +130,6 @@
} while (request && __sclp_vt220_emit(request));
if (request == NULL && sclp_vt220_flush_later)
sclp_vt220_emit_current();
- wake_up(&sclp_vt220_waitq);
/* Check if the tty needs a wake up call */
if (sclp_vt220_tty != NULL) {
tty_wakeup(sclp_vt220_tty);
@@ -383,7 +379,7 @@
*/
static int
__sclp_vt220_write(const unsigned char *buf, int count, int do_schedule,
- int convertlf, int may_schedule)
+ int convertlf, int may_fail)
{
unsigned long flags;
void *page;
@@ -395,15 +391,14 @@
overall_written = 0;
spin_lock_irqsave(&sclp_vt220_lock, flags);
do {
- /* Create a sclp output buffer if none exists yet */
+ /* Create an sclp output buffer if none exists yet */
if (sclp_vt220_current_request == NULL) {
while (list_empty(&sclp_vt220_empty)) {
spin_unlock_irqrestore(&sclp_vt220_lock, flags);
- if (in_interrupt() || !may_schedule)
- sclp_sync_wait();
+ if (may_fail)
+ goto out;
else
- wait_event(sclp_vt220_waitq,
- !list_empty(&sclp_vt220_empty));
+ sclp_sync_wait();
spin_lock_irqsave(&sclp_vt220_lock, flags);
}
page = (void *) sclp_vt220_empty.next;
@@ -437,6 +432,7 @@
add_timer(&sclp_vt220_timer);
}
spin_unlock_irqrestore(&sclp_vt220_lock, flags);
+out:
return overall_written;
}
@@ -520,19 +516,11 @@
* character to the tty device. If the kernel uses this routine,
* it must call the flush_chars() routine (if defined) when it is
* done stuffing characters into the driver.
- *
- * NOTE: include/linux/tty_driver.h specifies that a character should be
- * ignored if there is no room in the queue. This driver implements a different
- * semantic in that it will block when there is no more room left.
- *
- * FIXME: putchar can currently be called from BH and other non blocking
- * handlers so this semantic isn't a good idea.
*/
static int
sclp_vt220_put_char(struct tty_struct *tty, unsigned char ch)
{
- __sclp_vt220_write(&ch, 1, 0, 0, 1);
- return 1;
+ return __sclp_vt220_write(&ch, 1, 0, 0, 1);
}
/*
@@ -653,7 +641,6 @@
spin_lock_init(&sclp_vt220_lock);
INIT_LIST_HEAD(&sclp_vt220_empty);
INIT_LIST_HEAD(&sclp_vt220_outqueue);
- init_waitqueue_head(&sclp_vt220_waitq);
init_timer(&sclp_vt220_timer);
sclp_vt220_current_request = NULL;
sclp_vt220_buffered_chars = 0;
@@ -786,6 +773,7 @@
{
int rc;
+ INIT_LIST_HEAD(&sclp_vt220_register.list);
if (!CONSOLE_IS_SCLP)
return 0;
rc = __sclp_vt220_init();
diff --git a/drivers/s390/char/tape.h b/drivers/s390/char/tape.h
index dddf8d6..d0d565a 100644
--- a/drivers/s390/char/tape.h
+++ b/drivers/s390/char/tape.h
@@ -231,6 +231,9 @@
/* Request queue. */
struct list_head req_queue;
+ /* Request wait queue. */
+ wait_queue_head_t wait_queue;
+
/* Each tape device has (currently) two minor numbers. */
int first_minor;
diff --git a/drivers/s390/char/tape_3590.c b/drivers/s390/char/tape_3590.c
index 8246ef3..42ce791 100644
--- a/drivers/s390/char/tape_3590.c
+++ b/drivers/s390/char/tape_3590.c
@@ -1598,7 +1598,7 @@
rc = tape_3590_read_dev_chars(device, rdc_data);
if (rc) {
DBF_LH(3, "Read device characteristics failed!\n");
- goto fail_kmalloc;
+ goto fail_rdc_data;
}
rc = tape_std_assign(device);
if (rc)
diff --git a/drivers/s390/char/tape_block.c b/drivers/s390/char/tape_block.c
index ddc4a11..95da72b 100644
--- a/drivers/s390/char/tape_block.c
+++ b/drivers/s390/char/tape_block.c
@@ -179,11 +179,11 @@
tapeblock_end_request(req, -EIO);
continue;
}
+ blkdev_dequeue_request(req);
+ nr_queued++;
spin_unlock_irq(&device->blk_data.request_queue_lock);
rc = tapeblock_start_request(device, req);
spin_lock_irq(&device->blk_data.request_queue_lock);
- blkdev_dequeue_request(req);
- nr_queued++;
}
spin_unlock_irq(&device->blk_data.request_queue_lock);
atomic_set(&device->blk_data.requeue_scheduled, 0);
diff --git a/drivers/s390/char/tape_core.c b/drivers/s390/char/tape_core.c
index 7ad8cf1..c20e3c5 100644
--- a/drivers/s390/char/tape_core.c
+++ b/drivers/s390/char/tape_core.c
@@ -76,32 +76,9 @@
[TO_KEKL_QUERY] = "KLQ",[TO_RDC] = "RDC",
};
-static int
-busid_to_int(char *bus_id)
+static int devid_to_int(struct ccw_dev_id *dev_id)
{
- int dec;
- int d;
- char * s;
-
- for(s = bus_id, d = 0; *s != '\0' && *s != '.'; s++)
- d = (d * 10) + (*s - '0');
- dec = d;
- for(s++, d = 0; *s != '\0' && *s != '.'; s++)
- d = (d * 10) + (*s - '0');
- dec = (dec << 8) + d;
-
- for(s++; *s != '\0'; s++) {
- if (*s >= '0' && *s <= '9') {
- d = *s - '0';
- } else if (*s >= 'a' && *s <= 'f') {
- d = *s - 'a' + 10;
- } else {
- d = *s - 'A' + 10;
- }
- dec = (dec << 4) + d;
- }
-
- return dec;
+ return dev_id->devno + (dev_id->ssid << 16);
}
/*
@@ -472,6 +449,7 @@
INIT_LIST_HEAD(&device->req_queue);
INIT_LIST_HEAD(&device->node);
init_waitqueue_head(&device->state_change_wq);
+ init_waitqueue_head(&device->wait_queue);
device->tape_state = TS_INIT;
device->medium_state = MS_UNKNOWN;
*device->modeset_byte = 0;
@@ -551,6 +529,7 @@
{
struct tape_device *device;
int ret;
+ struct ccw_dev_id dev_id;
device = tape_alloc_device();
if (IS_ERR(device))
@@ -565,7 +544,8 @@
cdev->dev.driver_data = device;
cdev->handler = __tape_do_irq;
device->cdev = cdev;
- device->cdev_id = busid_to_int(cdev->dev.bus_id);
+ ccw_device_get_id(cdev, &dev_id);
+ device->cdev_id = devid_to_int(&dev_id);
PRINT_INFO("tape device %s found\n", cdev->dev.bus_id);
return ret;
}
@@ -975,21 +955,19 @@
int
tape_do_io(struct tape_device *device, struct tape_request *request)
{
- wait_queue_head_t wq;
int rc;
- init_waitqueue_head(&wq);
spin_lock_irq(get_ccwdev_lock(device->cdev));
/* Setup callback */
request->callback = __tape_wake_up;
- request->callback_data = &wq;
+ request->callback_data = &device->wait_queue;
/* Add request to request queue and try to start it. */
rc = __tape_start_request(device, request);
spin_unlock_irq(get_ccwdev_lock(device->cdev));
if (rc)
return rc;
/* Request added to the queue. Wait for its completion. */
- wait_event(wq, (request->callback == NULL));
+ wait_event(device->wait_queue, (request->callback == NULL));
/* Get rc from request */
return request->rc;
}
@@ -1010,20 +988,19 @@
tape_do_io_interruptible(struct tape_device *device,
struct tape_request *request)
{
- wait_queue_head_t wq;
int rc;
- init_waitqueue_head(&wq);
spin_lock_irq(get_ccwdev_lock(device->cdev));
/* Setup callback */
request->callback = __tape_wake_up_interruptible;
- request->callback_data = &wq;
+ request->callback_data = &device->wait_queue;
rc = __tape_start_request(device, request);
spin_unlock_irq(get_ccwdev_lock(device->cdev));
if (rc)
return rc;
/* Request added to the queue. Wait for its completion. */
- rc = wait_event_interruptible(wq, (request->callback == NULL));
+ rc = wait_event_interruptible(device->wait_queue,
+ (request->callback == NULL));
if (rc != -ERESTARTSYS)
/* Request finished normally. */
return request->rc;
@@ -1036,7 +1013,7 @@
/* Wait for the interrupt that acknowledges the halt. */
do {
rc = wait_event_interruptible(
- wq,
+ device->wait_queue,
(request->callback == NULL)
);
} while (rc == -ERESTARTSYS);
diff --git a/drivers/s390/char/vmlogrdr.c b/drivers/s390/char/vmlogrdr.c
index d364e0b..2c2428c 100644
--- a/drivers/s390/char/vmlogrdr.c
+++ b/drivers/s390/char/vmlogrdr.c
@@ -762,10 +762,10 @@
device_unregister(dev);
return ret;
}
- priv->class_device = device_create(vmlogrdr_class, dev,
- MKDEV(vmlogrdr_major,
- priv->minor_num),
- "%s", dev->bus_id);
+ priv->class_device = device_create_drvdata(vmlogrdr_class, dev,
+ MKDEV(vmlogrdr_major,
+ priv->minor_num),
+ priv, "%s", dev->bus_id);
if (IS_ERR(priv->class_device)) {
ret = PTR_ERR(priv->class_device);
priv->class_device=NULL;
@@ -773,7 +773,6 @@
device_unregister(dev);
return ret;
}
- dev->driver_data = priv;
priv->device = dev;
return 0;
}
@@ -858,7 +857,7 @@
for (i=0; i < MAXMINOR; ++i ) {
sys_ser[i].buffer = (char *) get_zeroed_page(GFP_KERNEL);
if (!sys_ser[i].buffer) {
- rc = ENOMEM;
+ rc = -ENOMEM;
break;
}
sys_ser[i].current_position = sys_ser[i].buffer;
diff --git a/drivers/s390/cio/blacklist.c b/drivers/s390/cio/blacklist.c
index 9c21b8f..0bfcbbe 100644
--- a/drivers/s390/cio/blacklist.c
+++ b/drivers/s390/cio/blacklist.c
@@ -19,7 +19,6 @@
#include <asm/cio.h>
#include <asm/uaccess.h>
-#include <asm/cio.h>
#include "blacklist.h"
#include "cio.h"
@@ -98,8 +97,8 @@
return 0;
}
-static int parse_busid(char *str, int *cssid, int *ssid, int *devno,
- int msgtrigger)
+static int parse_busid(char *str, unsigned int *cssid, unsigned int *ssid,
+ unsigned int *devno, int msgtrigger)
{
char *str_work;
int val, rc, ret;
@@ -149,7 +148,7 @@
static int blacklist_parse_parameters(char *str, range_action action,
int msgtrigger)
{
- int from_cssid, to_cssid, from_ssid, to_ssid, from, to;
+ unsigned int from_cssid, to_cssid, from_ssid, to_ssid, from, to;
int rc, totalrc;
char *parm;
range_action ra;
diff --git a/drivers/s390/cio/cio.c b/drivers/s390/cio/cio.c
index 82c6a2d..b32d7eb 100644
--- a/drivers/s390/cio/cio.c
+++ b/drivers/s390/cio/cio.c
@@ -576,12 +576,14 @@
err = -ENODEV;
goto out;
}
- if (cio_is_console(sch->schid))
+ if (cio_is_console(sch->schid)) {
sch->opm = 0xff;
- else
+ sch->isc = 1;
+ } else {
sch->opm = chp_get_sch_opm(sch);
+ sch->isc = 3;
+ }
sch->lpm = sch->schib.pmcw.pam & sch->opm;
- sch->isc = 3;
CIO_MSG_EVENT(6, "Detected device %04x on subchannel 0.%x.%04X "
"- PIM = %02X, PAM = %02X, POM = %02X\n",
@@ -704,9 +706,9 @@
if (!console_subchannel_in_use)
return;
- /* disable all but isc 7 (console device) */
+ /* disable all but isc 1 (console device) */
__ctl_store (save_cr6, 6, 6);
- cr6 = 0x01000000;
+ cr6 = 0x40000000;
__ctl_load (cr6, 6, 6);
do {
@@ -788,11 +790,11 @@
}
/*
- * enable console I/O-interrupt subclass 7
+ * enable console I/O-interrupt subclass 1
*/
- ctl_set_bit(6, 24);
- console_subchannel.isc = 7;
- console_subchannel.schib.pmcw.isc = 7;
+ ctl_set_bit(6, 30);
+ console_subchannel.isc = 1;
+ console_subchannel.schib.pmcw.isc = 1;
console_subchannel.schib.pmcw.intparm =
(u32)(addr_t)&console_subchannel;
ret = cio_modify(&console_subchannel);
diff --git a/drivers/s390/cio/device_pgid.c b/drivers/s390/cio/device_pgid.c
index ba55905..5cf7be0 100644
--- a/drivers/s390/cio/device_pgid.c
+++ b/drivers/s390/cio/device_pgid.c
@@ -243,16 +243,10 @@
/* Setup sense path group id channel program. */
cdev->private->pgid[0].inf.fc = func;
ccw = cdev->private->iccws;
- if (!cdev->private->flags.pgid_single) {
- cdev->private->pgid[0].inf.fc |= SPID_FUNC_MULTI_PATH;
- ccw->cmd_code = CCW_CMD_SUSPEND_RECONN;
- ccw->cda = 0;
- ccw->count = 0;
- ccw->flags = CCW_FLAG_SLI | CCW_FLAG_CC;
- ccw++;
- } else
+ if (cdev->private->flags.pgid_single)
cdev->private->pgid[0].inf.fc |= SPID_FUNC_SINGLE_PATH;
-
+ else
+ cdev->private->pgid[0].inf.fc |= SPID_FUNC_MULTI_PATH;
ccw->cmd_code = CCW_CMD_SET_PGID;
ccw->cda = (__u32) __pa (&cdev->private->pgid[0]);
ccw->count = sizeof (struct pgid);
diff --git a/drivers/s390/kvm/kvm_virtio.c b/drivers/s390/kvm/kvm_virtio.c
index 47a7e62..5ab3434 100644
--- a/drivers/s390/kvm/kvm_virtio.c
+++ b/drivers/s390/kvm/kvm_virtio.c
@@ -31,11 +31,6 @@
*/
static void *kvm_devices;
-/*
- * Unique numbering for kvm devices.
- */
-static unsigned int dev_index;
-
struct kvm_device {
struct virtio_device vdev;
struct kvm_device_desc *desc;
@@ -78,27 +73,32 @@
+ desc->config_len;
}
-/*
- * This tests (and acknowleges) a feature bit.
- */
-static bool kvm_feature(struct virtio_device *vdev, unsigned fbit)
+/* This gets the device's feature bits. */
+static u32 kvm_get_features(struct virtio_device *vdev)
{
+ unsigned int i;
+ u32 features = 0;
struct kvm_device_desc *desc = to_kvmdev(vdev)->desc;
- u8 *features;
+ u8 *in_features = kvm_vq_features(desc);
- if (fbit / 8 > desc->feature_len)
- return false;
+ for (i = 0; i < min(desc->feature_len * 8, 32); i++)
+ if (in_features[i / 8] & (1 << (i % 8)))
+ features |= (1 << i);
+ return features;
+}
- features = kvm_vq_features(desc);
- if (!(features[fbit / 8] & (1 << (fbit % 8))))
- return false;
+static void kvm_set_features(struct virtio_device *vdev, u32 features)
+{
+ unsigned int i;
+ struct kvm_device_desc *desc = to_kvmdev(vdev)->desc;
+ /* Second half of bitmap is features we accept. */
+ u8 *out_features = kvm_vq_features(desc) + desc->feature_len;
- /*
- * We set the matching bit in the other half of the bitmap to tell the
- * Host we want to use this feature.
- */
- features[desc->feature_len + fbit / 8] |= (1 << (fbit % 8));
- return true;
+ memset(out_features, 0, desc->feature_len);
+ for (i = 0; i < min(desc->feature_len * 8, 32); i++) {
+ if (features & (1 << i))
+ out_features[i / 8] |= (1 << (i % 8));
+ }
}
/*
@@ -221,7 +221,8 @@
* The config ops structure as defined by virtio config
*/
static struct virtio_config_ops kvm_vq_configspace_ops = {
- .feature = kvm_feature,
+ .get_features = kvm_get_features,
+ .set_features = kvm_set_features,
.get = kvm_get,
.set = kvm_set,
.get_status = kvm_get_status,
@@ -244,26 +245,25 @@
* adds a new device and register it with virtio
* appropriate drivers are loaded by the device model
*/
-static void add_kvm_device(struct kvm_device_desc *d)
+static void add_kvm_device(struct kvm_device_desc *d, unsigned int offset)
{
struct kvm_device *kdev;
kdev = kzalloc(sizeof(*kdev), GFP_KERNEL);
if (!kdev) {
- printk(KERN_EMERG "Cannot allocate kvm dev %u\n",
- dev_index++);
+ printk(KERN_EMERG "Cannot allocate kvm dev %u type %u\n",
+ offset, d->type);
return;
}
kdev->vdev.dev.parent = &kvm_root;
- kdev->vdev.index = dev_index++;
kdev->vdev.id.device = d->type;
kdev->vdev.config = &kvm_vq_configspace_ops;
kdev->desc = d;
if (register_virtio_device(&kdev->vdev) != 0) {
- printk(KERN_ERR "Failed to register kvm device %u\n",
- kdev->vdev.index);
+ printk(KERN_ERR "Failed to register kvm device %u type %u\n",
+ offset, d->type);
kfree(kdev);
}
}
@@ -283,7 +283,7 @@
if (d->type == 0)
break;
- add_kvm_device(d);
+ add_kvm_device(d, i);
}
}
diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c
index 436bf1f..9a71dae 100644
--- a/drivers/s390/net/qeth_core_main.c
+++ b/drivers/s390/net/qeth_core_main.c
@@ -290,9 +290,6 @@
card->dev->features |= NETIF_F_TSO | NETIF_F_SG |
NETIF_F_HW_CSUM;
} else {
- PRINT_WARN("TSO not supported on %s. "
- "large_send set to 'no'.\n",
- card->dev->name);
card->dev->features &= ~(NETIF_F_TSO | NETIF_F_SG |
NETIF_F_HW_CSUM);
card->options.large_send = QETH_LARGE_SEND_NO;
@@ -1407,12 +1404,6 @@
}
}
-static inline __u16 qeth_raw_devno_from_bus_id(char *id)
-{
- id += (strlen(id) - 4);
- return (__u16) simple_strtoul(id, &id, 16);
-}
-
static int qeth_idx_activate_get_answer(struct qeth_channel *channel,
void (*idx_reply_cb)(struct qeth_channel *,
struct qeth_cmd_buffer *))
@@ -1439,7 +1430,7 @@
spin_unlock_irqrestore(get_ccwdev_lock(channel->ccwdev), flags);
if (rc) {
- PRINT_ERR("Error2 in activating channel rc=%d\n", rc);
+ QETH_DBF_MESSAGE(2, "Error2 in activating channel rc=%d\n", rc);
QETH_DBF_TEXT_(SETUP, 2, "2err%d", rc);
atomic_set(&channel->irq_pending, 0);
wake_up(&card->wait_q);
@@ -1468,6 +1459,7 @@
__u16 temp;
__u8 tmp;
int rc;
+ struct ccw_dev_id temp_devid;
card = CARD_FROM_CDEV(channel->ccwdev);
@@ -1494,8 +1486,8 @@
&card->token.issuer_rm_w, QETH_MPC_TOKEN_LENGTH);
memcpy(QETH_IDX_ACT_FUNC_LEVEL(iob->data),
&card->info.func_level, sizeof(__u16));
- temp = qeth_raw_devno_from_bus_id(CARD_DDEV_ID(card));
- memcpy(QETH_IDX_ACT_QDIO_DEV_CUA(iob->data), &temp, 2);
+ ccw_device_get_id(CARD_DDEV(card), &temp_devid);
+ memcpy(QETH_IDX_ACT_QDIO_DEV_CUA(iob->data), &temp_devid.devno, 2);
temp = (card->info.cula << 8) + card->info.unit_addr2;
memcpy(QETH_IDX_ACT_QDIO_DEV_REALADDR(iob->data), &temp, 2);
@@ -1508,7 +1500,8 @@
spin_unlock_irqrestore(get_ccwdev_lock(channel->ccwdev), flags);
if (rc) {
- PRINT_ERR("Error1 in activating channel. rc=%d\n", rc);
+ QETH_DBF_MESSAGE(2, "Error1 in activating channel. rc=%d\n",
+ rc);
QETH_DBF_TEXT_(SETUP, 2, "1err%d", rc);
atomic_set(&channel->irq_pending, 0);
wake_up(&card->wait_q);
@@ -1658,7 +1651,6 @@
reply = qeth_alloc_reply(card);
if (!reply) {
- PRINT_WARN("Could not alloc qeth_reply!\n");
return -ENOMEM;
}
reply->callback = reply_cb;
@@ -2612,15 +2604,9 @@
if (newcount < count) {
/* we are in memory shortage so we switch back to
traditional skb allocation and drop packages */
- if (!atomic_read(&card->force_alloc_skb) &&
- net_ratelimit())
- PRINT_WARN("Switch to alloc skb\n");
atomic_set(&card->force_alloc_skb, 3);
count = newcount;
} else {
- if ((atomic_read(&card->force_alloc_skb) == 1) &&
- net_ratelimit())
- PRINT_WARN("Switch to sg\n");
atomic_add_unless(&card->force_alloc_skb, -1, 0);
}
@@ -3034,7 +3020,7 @@
elements_needed = 1 + (((((unsigned long) hdr) % PAGE_SIZE)
+ skb->len) >> PAGE_SHIFT);
if ((elements_needed + elems) > QETH_MAX_BUFFER_ELEMENTS(card)) {
- PRINT_ERR("Invalid size of IP packet "
+ QETH_DBF_MESSAGE(2, "Invalid size of IP packet "
"(Number=%d / Length=%d). Discarded.\n",
(elements_needed+elems), skb->len);
return 0;
@@ -3247,8 +3233,6 @@
* free buffers) to handle eddp context */
if (qeth_eddp_check_buffers_for_context(queue, ctx)
< 0) {
- if (net_ratelimit())
- PRINT_WARN("eddp tx_dropped 1\n");
rc = -EBUSY;
goto out;
}
@@ -3260,7 +3244,6 @@
tmp = qeth_eddp_fill_buffer(queue, ctx,
queue->next_buf_to_fill);
if (tmp < 0) {
- PRINT_ERR("eddp tx_dropped 2\n");
rc = -EBUSY;
goto out;
}
@@ -3602,8 +3585,6 @@
if ((!qeth_adp_supported(card, IPA_SETADP_SET_SNMP_CONTROL)) &&
(!card->options.layer2)) {
- PRINT_WARN("SNMP Query MIBS not supported "
- "on %s!\n", QETH_CARD_IFNAME(card));
return -EOPNOTSUPP;
}
/* skip 4 bytes (data_len struct member) to get req_len */
@@ -3634,7 +3615,7 @@
rc = qeth_send_ipa_snmp_cmd(card, iob, QETH_SETADP_BASE_LEN + req_len,
qeth_snmp_command_cb, (void *)&qinfo);
if (rc)
- PRINT_WARN("SNMP command failed on %s: (0x%x)\n",
+ QETH_DBF_MESSAGE(2, "SNMP command failed on %s: (0x%x)\n",
QETH_CARD_IFNAME(card), rc);
else {
if (copy_to_user(udata, qinfo.udata, qinfo.udata_len))
@@ -3807,8 +3788,8 @@
if (mpno)
mpno = min(mpno - 1, QETH_MAX_PORTNO);
if (card->info.portno > mpno) {
- PRINT_ERR("Device %s does not offer port number %d \n.",
- CARD_BUS_ID(card), card->info.portno);
+ QETH_DBF_MESSAGE(2, "Device %s does not offer port number %d"
+ "\n.", CARD_BUS_ID(card), card->info.portno);
rc = -ENODEV;
goto out;
}
@@ -3985,8 +3966,6 @@
return skb;
no_mem:
if (net_ratelimit()) {
- PRINT_WARN("No memory for packet received on %s.\n",
- QETH_CARD_IFNAME(card));
QETH_DBF_TEXT(TRACE, 2, "noskbmem");
QETH_DBF_TEXT_(TRACE, 2, "%s", CARD_BUS_ID(card));
}
@@ -4004,15 +3983,17 @@
}
}
-void qeth_dbf_longtext(enum qeth_dbf_names dbf_nix, int level, char *text, ...)
+void qeth_dbf_longtext(enum qeth_dbf_names dbf_nix, int level, char *fmt, ...)
{
char dbf_txt_buf[32];
+ va_list args;
if (level > (qeth_dbf[dbf_nix].id)->level)
return;
- snprintf(dbf_txt_buf, sizeof(dbf_txt_buf), text);
+ va_start(args, fmt);
+ vsnprintf(dbf_txt_buf, sizeof(dbf_txt_buf), fmt, args);
+ va_end(args);
debug_text_event(qeth_dbf[dbf_nix].id, level, dbf_txt_buf);
-
}
EXPORT_SYMBOL_GPL(qeth_dbf_longtext);
diff --git a/drivers/s390/net/qeth_core_offl.c b/drivers/s390/net/qeth_core_offl.c
index 822df83..452874e 100644
--- a/drivers/s390/net/qeth_core_offl.c
+++ b/drivers/s390/net/qeth_core_offl.c
@@ -122,8 +122,8 @@
if (element == 0)
return -EBUSY;
else {
- PRINT_WARN("could only partially fill eddp "
- "buffer!\n");
+ QETH_DBF_MESSAGE(2, "could only partially fill"
+ "eddp buffer!\n");
goto out;
}
}
@@ -143,8 +143,6 @@
if (must_refcnt) {
must_refcnt = 0;
if (qeth_eddp_buf_ref_context(buf, ctx)) {
- PRINT_WARN("no memory to create eddp context "
- "reference\n");
goto out_check;
}
}
diff --git a/drivers/s390/net/qeth_core_sys.c b/drivers/s390/net/qeth_core_sys.c
index 08a50f0..c26e842 100644
--- a/drivers/s390/net/qeth_core_sys.c
+++ b/drivers/s390/net/qeth_core_sys.c
@@ -129,7 +129,6 @@
portno = simple_strtoul(buf, &tmp, 16);
if (portno > QETH_MAX_PORTNO) {
- PRINT_WARN("portno 0x%X is out of range\n", portno);
return -EINVAL;
}
@@ -223,8 +222,6 @@
* if though we have to permit priority queueing
*/
if (card->qdio.no_out_queues == 1) {
- PRINT_WARN("Priority queueing disabled due "
- "to hardware limitations!\n");
card->qdio.do_prio_queueing = QETH_PRIOQ_DEFAULT;
return -EPERM;
}
@@ -250,7 +247,6 @@
card->qdio.do_prio_queueing = QETH_NO_PRIO_QUEUEING;
card->qdio.default_out_queue = QETH_DEFAULT_QUEUE;
} else {
- PRINT_WARN("Unknown queueing type '%s'\n", tmp);
return -EINVAL;
}
return count;
@@ -291,9 +287,6 @@
((cnt > QETH_IN_BUF_COUNT_MAX) ? QETH_IN_BUF_COUNT_MAX : cnt);
if (old_cnt != cnt) {
rc = qeth_realloc_buffer_pool(card, cnt);
- if (rc)
- PRINT_WARN("Error (%d) while setting "
- "buffer count.\n", rc);
}
return count;
}
@@ -355,7 +348,6 @@
card->perf_stats.initial_rx_packets = card->stats.rx_packets;
card->perf_stats.initial_tx_packets = card->stats.tx_packets;
} else {
- PRINT_WARN("performance_stats: write 0 or 1 to this file!\n");
return -EINVAL;
}
return count;
@@ -399,7 +391,6 @@
newdis = QETH_DISCIPLINE_LAYER2;
break;
default:
- PRINT_WARN("layer2: write 0 or 1 to this file!\n");
return -EINVAL;
}
@@ -463,7 +454,6 @@
} else if (!strcmp(tmp, "TSO")) {
type = QETH_LARGE_SEND_TSO;
} else {
- PRINT_WARN("large_send: invalid mode %s!\n", tmp);
return -EINVAL;
}
if (card->options.large_send == type)
@@ -503,8 +493,6 @@
if (i <= max_value) {
*value = i;
} else {
- PRINT_WARN("blkt total time: write values between"
- " 0 and %d to this file!\n", max_value);
return -EINVAL;
}
return count;
diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c
index 86ec50d..f682f7b 100644
--- a/drivers/s390/net/qeth_l2_main.c
+++ b/drivers/s390/net/qeth_l2_main.c
@@ -101,19 +101,16 @@
{
struct qeth_card *card;
struct net_device *ndev;
- unsigned char *readno;
- __u16 temp_dev_no, card_dev_no;
- char *endp;
+ __u16 temp_dev_no;
unsigned long flags;
+ struct ccw_dev_id read_devid;
ndev = NULL;
memcpy(&temp_dev_no, read_dev_no, 2);
read_lock_irqsave(&qeth_core_card_list.rwlock, flags);
list_for_each_entry(card, &qeth_core_card_list.list, list) {
- readno = CARD_RDEV_ID(card);
- readno += (strlen(readno) - 4);
- card_dev_no = simple_strtoul(readno, &endp, 16);
- if (card_dev_no == temp_dev_no) {
+ ccw_device_get_id(CARD_RDEV(card), &read_devid);
+ if (read_devid.devno == temp_dev_no) {
ndev = card->dev;
break;
}
@@ -134,14 +131,14 @@
mac = &cmd->data.setdelmac.mac[0];
/* MAC already registered, needed in couple/uncouple case */
if (cmd->hdr.return_code == 0x2005) {
- PRINT_WARN("Group MAC %02x:%02x:%02x:%02x:%02x:%02x " \
+ QETH_DBF_MESSAGE(2, "Group MAC %02x:%02x:%02x:%02x:%02x:%02x "
"already existing on %s \n",
mac[0], mac[1], mac[2], mac[3], mac[4], mac[5],
QETH_CARD_IFNAME(card));
cmd->hdr.return_code = 0;
}
if (cmd->hdr.return_code)
- PRINT_ERR("Could not set group MAC " \
+ QETH_DBF_MESSAGE(2, "Could not set group MAC "
"%02x:%02x:%02x:%02x:%02x:%02x on %s: %x\n",
mac[0], mac[1], mac[2], mac[3], mac[4], mac[5],
QETH_CARD_IFNAME(card), cmd->hdr.return_code);
@@ -166,7 +163,7 @@
cmd = (struct qeth_ipa_cmd *) data;
mac = &cmd->data.setdelmac.mac[0];
if (cmd->hdr.return_code)
- PRINT_ERR("Could not delete group MAC " \
+ QETH_DBF_MESSAGE(2, "Could not delete group MAC "
"%02x:%02x:%02x:%02x:%02x:%02x on %s: %x\n",
mac[0], mac[1], mac[2], mac[3], mac[4], mac[5],
QETH_CARD_IFNAME(card), cmd->hdr.return_code);
@@ -186,10 +183,8 @@
mc = kmalloc(sizeof(struct qeth_mc_mac), GFP_ATOMIC);
- if (!mc) {
- PRINT_ERR("no mem vor mc mac address\n");
+ if (!mc)
return;
- }
memcpy(mc->mc_addr, mac, OSA_ADDR_LEN);
mc->mc_addrlen = OSA_ADDR_LEN;
@@ -280,7 +275,7 @@
QETH_DBF_TEXT(TRACE, 2, "L2sdvcb");
cmd = (struct qeth_ipa_cmd *) data;
if (cmd->hdr.return_code) {
- PRINT_ERR("Error in processing VLAN %i on %s: 0x%x. "
+ QETH_DBF_MESSAGE(2, "Error in processing VLAN %i on %s: 0x%x. "
"Continuing\n", cmd->data.setdelvlan.vlan_id,
QETH_CARD_IFNAME(card), cmd->hdr.return_code);
QETH_DBF_TEXT_(TRACE, 2, "L2VL%4x", cmd->hdr.command);
@@ -333,8 +328,6 @@
spin_lock_bh(&card->vlanlock);
list_add_tail(&id->list, &card->vid_list);
spin_unlock_bh(&card->vlanlock);
- } else {
- PRINT_ERR("no memory for vid\n");
}
}
@@ -550,16 +543,15 @@
rc = qeth_query_setadapterparms(card);
if (rc) {
- PRINT_WARN("could not query adapter parameters on device %s: "
- "x%x\n", CARD_BUS_ID(card), rc);
+ QETH_DBF_MESSAGE(2, "could not query adapter parameters on "
+ "device %s: x%x\n", CARD_BUS_ID(card), rc);
}
if (card->info.guestlan) {
rc = qeth_setadpparms_change_macaddr(card);
if (rc) {
- PRINT_WARN("couldn't get MAC address on "
- "device %s: x%x\n",
- CARD_BUS_ID(card), rc);
+ QETH_DBF_MESSAGE(2, "couldn't get MAC address on "
+ "device %s: x%x\n", CARD_BUS_ID(card), rc);
QETH_DBF_TEXT_(SETUP, 2, "1err%d", rc);
return rc;
}
@@ -585,8 +577,6 @@
}
if (card->info.type == QETH_CARD_TYPE_OSN) {
- PRINT_WARN("Setting MAC address on %s is not supported.\n",
- dev->name);
QETH_DBF_TEXT(TRACE, 3, "setmcOSN");
return -EOPNOTSUPP;
}
@@ -666,7 +656,7 @@
ctx = qeth_eddp_create_context(card, new_skb, hdr,
skb->sk->sk_protocol);
if (ctx == NULL) {
- PRINT_WARN("could not create eddp context\n");
+ QETH_DBF_MESSAGE(2, "could not create eddp context\n");
goto tx_drop;
}
} else {
@@ -731,6 +721,7 @@
if ((new_skb != skb) && new_skb)
dev_kfree_skb_any(new_skb);
dev_kfree_skb_any(skb);
+ netif_wake_queue(dev);
return NETDEV_TX_OK;
}
@@ -1155,7 +1146,7 @@
(addr_t) iob, 0, 0);
spin_unlock_irqrestore(get_ccwdev_lock(card->write.ccwdev), flags);
if (rc) {
- PRINT_WARN("qeth_osn_send_control_data: "
+ QETH_DBF_MESSAGE(2, "qeth_osn_send_control_data: "
"ccw_device_start rc = %i\n", rc);
QETH_DBF_TEXT_(TRACE, 2, " err%d", rc);
qeth_release_buffer(iob->channel, iob);
diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c
index 94a8ead..999552c 100644
--- a/drivers/s390/net/qeth_l3_main.c
+++ b/drivers/s390/net/qeth_l3_main.c
@@ -311,7 +311,6 @@
addr = kzalloc(sizeof(struct qeth_ipaddr), GFP_ATOMIC);
if (addr == NULL) {
- PRINT_WARN("Not enough memory to add address\n");
return NULL;
}
addr->type = QETH_IP_TYPE_NORMAL;
@@ -649,15 +648,6 @@
}
}
out_inval:
- PRINT_WARN("Routing type '%s' not supported for interface %s.\n"
- "Router status set to 'no router'.\n",
- ((*type == PRIMARY_ROUTER)? "primary router" :
- (*type == SECONDARY_ROUTER)? "secondary router" :
- (*type == PRIMARY_CONNECTOR)? "primary connector" :
- (*type == SECONDARY_CONNECTOR)? "secondary connector" :
- (*type == MULTICAST_ROUTER)? "multicast router" :
- "unknown"),
- card->dev->name);
*type = NO_ROUTER;
}
@@ -674,9 +664,9 @@
QETH_PROT_IPV4);
if (rc) {
card->options.route4.type = NO_ROUTER;
- PRINT_WARN("Error (0x%04x) while setting routing type on %s. "
- "Type set to 'no router'.\n",
- rc, QETH_CARD_IFNAME(card));
+ QETH_DBF_MESSAGE(2, "Error (0x%04x) while setting routing type"
+ " on %s. Type set to 'no router'.\n", rc,
+ QETH_CARD_IFNAME(card));
}
return rc;
}
@@ -697,9 +687,9 @@
QETH_PROT_IPV6);
if (rc) {
card->options.route6.type = NO_ROUTER;
- PRINT_WARN("Error (0x%04x) while setting routing type on %s. "
- "Type set to 'no router'.\n",
- rc, QETH_CARD_IFNAME(card));
+ QETH_DBF_MESSAGE(2, "Error (0x%04x) while setting routing type"
+ " on %s. Type set to 'no router'.\n", rc,
+ QETH_CARD_IFNAME(card));
}
#endif
return rc;
@@ -737,7 +727,6 @@
if (!memcmp(ipatoe->addr, new->addr,
(ipatoe->proto == QETH_PROT_IPV4)? 4:16) &&
(ipatoe->mask_bits == new->mask_bits)) {
- PRINT_WARN("ipato entry already exists!\n");
rc = -EEXIST;
break;
}
@@ -802,7 +791,6 @@
rc = -EEXIST;
spin_unlock_irqrestore(&card->ip_lock, flags);
if (rc) {
- PRINT_WARN("Cannot add VIPA. Address already exists!\n");
return rc;
}
if (!qeth_l3_add_ip(card, ipaddr))
@@ -867,7 +855,6 @@
rc = -EEXIST;
spin_unlock_irqrestore(&card->ip_lock, flags);
if (rc) {
- PRINT_WARN("Cannot add RXIP. Address already exists!\n");
return rc;
}
if (!qeth_l3_add_ip(card, ipaddr))
@@ -1020,23 +1007,23 @@
IPA_SETADP_SET_BROADCAST_MODE,
card->options.broadcast_mode);
if (rc)
- PRINT_WARN("couldn't set broadcast mode on "
+ QETH_DBF_MESSAGE(2, "couldn't set broadcast mode on "
"device %s: x%x\n",
CARD_BUS_ID(card), rc);
rc = qeth_l3_send_setadp_mode(card,
IPA_SETADP_ALTER_MAC_ADDRESS,
card->options.macaddr_mode);
if (rc)
- PRINT_WARN("couldn't set macaddr mode on "
+ QETH_DBF_MESSAGE(2, "couldn't set macaddr mode on "
"device %s: x%x\n", CARD_BUS_ID(card), rc);
return rc;
}
if (card->options.broadcast_mode == QETH_TR_BROADCAST_LOCAL)
- PRINT_WARN("set adapter parameters not available "
+ QETH_DBF_MESSAGE(2, "set adapter parameters not available "
"to set broadcast mode, using ALLRINGS "
"on device %s:\n", CARD_BUS_ID(card));
if (card->options.macaddr_mode == QETH_TR_MACADDR_CANONICAL)
- PRINT_WARN("set adapter parameters not available "
+ QETH_DBF_MESSAGE(2, "set adapter parameters not available "
"to set macaddr mode, using NONCANONICAL "
"on device %s:\n", CARD_BUS_ID(card));
return 0;
@@ -2070,7 +2057,7 @@
card = netdev_priv(dev);
else if (rc == QETH_VLAN_CARD)
card = netdev_priv(vlan_dev_info(dev)->real_dev);
- if (card->options.layer2)
+ if (card && card->options.layer2)
card = NULL;
QETH_DBF_TEXT_(TRACE, 4, "%d", rc);
return card ;
@@ -2182,8 +2169,6 @@
if (card->info.guestlan)
return -EOPNOTSUPP;
if (!qeth_is_supported(card, IPA_ARP_PROCESSING)) {
- PRINT_WARN("ARP processing not supported "
- "on %s!\n", QETH_CARD_IFNAME(card));
return -EOPNOTSUPP;
}
rc = qeth_l3_send_simple_setassparms(card, IPA_ARP_PROCESSING,
@@ -2191,8 +2176,8 @@
no_entries);
if (rc) {
tmp = rc;
- PRINT_WARN("Could not set number of ARP entries on %s: "
- "%s (0x%x/%d)\n", QETH_CARD_IFNAME(card),
+ QETH_DBF_MESSAGE(2, "Could not set number of ARP entries on "
+ "%s: %s (0x%x/%d)\n", QETH_CARD_IFNAME(card),
qeth_l3_arp_get_error_cause(&rc), tmp, tmp);
}
return rc;
@@ -2260,9 +2245,6 @@
qdata->no_entries * uentry_size){
QETH_DBF_TEXT_(TRACE, 4, "qaer3%i", -ENOMEM);
cmd->hdr.return_code = -ENOMEM;
- PRINT_WARN("query ARP user space buffer is too small for "
- "the returned number of ARP entries. "
- "Aborting query!\n");
goto out_error;
}
QETH_DBF_TEXT_(TRACE, 4, "anore%i",
@@ -2324,8 +2306,6 @@
if (!qeth_is_supported(card,/*IPA_QUERY_ARP_ADDR_INFO*/
IPA_ARP_PROCESSING)) {
- PRINT_WARN("ARP processing not supported "
- "on %s!\n", QETH_CARD_IFNAME(card));
return -EOPNOTSUPP;
}
/* get size of userspace buffer and mask_bits -> 6 bytes */
@@ -2344,7 +2324,7 @@
qeth_l3_arp_query_cb, (void *)&qinfo);
if (rc) {
tmp = rc;
- PRINT_WARN("Error while querying ARP cache on %s: %s "
+ QETH_DBF_MESSAGE(2, "Error while querying ARP cache on %s: %s "
"(0x%x/%d)\n", QETH_CARD_IFNAME(card),
qeth_l3_arp_get_error_cause(&rc), tmp, tmp);
if (copy_to_user(udata, qinfo.udata, 4))
@@ -2375,8 +2355,6 @@
if (card->info.guestlan)
return -EOPNOTSUPP;
if (!qeth_is_supported(card, IPA_ARP_PROCESSING)) {
- PRINT_WARN("ARP processing not supported "
- "on %s!\n", QETH_CARD_IFNAME(card));
return -EOPNOTSUPP;
}
@@ -2391,10 +2369,9 @@
if (rc) {
tmp = rc;
qeth_l3_ipaddr4_to_string((u8 *)entry->ipaddr, buf);
- PRINT_WARN("Could not add ARP entry for address %s on %s: "
- "%s (0x%x/%d)\n",
- buf, QETH_CARD_IFNAME(card),
- qeth_l3_arp_get_error_cause(&rc), tmp, tmp);
+ QETH_DBF_MESSAGE(2, "Could not add ARP entry for address %s "
+ "on %s: %s (0x%x/%d)\n", buf, QETH_CARD_IFNAME(card),
+ qeth_l3_arp_get_error_cause(&rc), tmp, tmp);
}
return rc;
}
@@ -2417,8 +2394,6 @@
if (card->info.guestlan)
return -EOPNOTSUPP;
if (!qeth_is_supported(card, IPA_ARP_PROCESSING)) {
- PRINT_WARN("ARP processing not supported "
- "on %s!\n", QETH_CARD_IFNAME(card));
return -EOPNOTSUPP;
}
memcpy(buf, entry, 12);
@@ -2433,10 +2408,9 @@
tmp = rc;
memset(buf, 0, 16);
qeth_l3_ipaddr4_to_string((u8 *)entry->ipaddr, buf);
- PRINT_WARN("Could not delete ARP entry for address %s on %s: "
- "%s (0x%x/%d)\n",
- buf, QETH_CARD_IFNAME(card),
- qeth_l3_arp_get_error_cause(&rc), tmp, tmp);
+ QETH_DBF_MESSAGE(2, "Could not delete ARP entry for address %s"
+ " on %s: %s (0x%x/%d)\n", buf, QETH_CARD_IFNAME(card),
+ qeth_l3_arp_get_error_cause(&rc), tmp, tmp);
}
return rc;
}
@@ -2456,16 +2430,14 @@
if (card->info.guestlan || (card->info.type == QETH_CARD_TYPE_IQD))
return -EOPNOTSUPP;
if (!qeth_is_supported(card, IPA_ARP_PROCESSING)) {
- PRINT_WARN("ARP processing not supported "
- "on %s!\n", QETH_CARD_IFNAME(card));
return -EOPNOTSUPP;
}
rc = qeth_l3_send_simple_setassparms(card, IPA_ARP_PROCESSING,
IPA_CMD_ASS_ARP_FLUSH_CACHE, 0);
if (rc) {
tmp = rc;
- PRINT_WARN("Could not flush ARP cache on %s: %s (0x%x/%d)\n",
- QETH_CARD_IFNAME(card),
+ QETH_DBF_MESSAGE(2, "Could not flush ARP cache on %s: %s "
+ "(0x%x/%d)\n", QETH_CARD_IFNAME(card),
qeth_l3_arp_get_error_cause(&rc), tmp, tmp);
}
return rc;
@@ -2724,7 +2696,7 @@
ctx = qeth_eddp_create_context(card, new_skb, hdr,
skb->sk->sk_protocol);
if (ctx == NULL) {
- PRINT_WARN("could not create eddp context\n");
+ QETH_DBF_MESSAGE(2, "could not create eddp context\n");
goto tx_drop;
}
} else {
@@ -2792,6 +2764,7 @@
if ((new_skb != skb) && new_skb)
dev_kfree_skb_any(new_skb);
dev_kfree_skb_any(skb);
+ netif_wake_queue(dev);
return NETDEV_TX_OK;
}
diff --git a/drivers/s390/net/qeth_l3_sys.c b/drivers/s390/net/qeth_l3_sys.c
index 08f51fd..ac19937 100644
--- a/drivers/s390/net/qeth_l3_sys.c
+++ b/drivers/s390/net/qeth_l3_sys.c
@@ -85,7 +85,6 @@
} else if (!strcmp(tmp, "multicast_router")) {
route->type = MULTICAST_ROUTER;
} else {
- PRINT_WARN("Invalid routing type '%s'.\n", tmp);
return -EINVAL;
}
if (((card->state == CARD_STATE_SOFTSETUP) ||
@@ -137,9 +136,6 @@
return -EINVAL;
if (!qeth_is_supported(card, IPA_IPV6)) {
- PRINT_WARN("IPv6 not supported for interface %s.\n"
- "Routing status no changed.\n",
- QETH_CARD_IFNAME(card));
return -ENOTSUPP;
}
@@ -179,7 +175,6 @@
if ((i == 0) || (i == 1))
card->options.fake_broadcast = i;
else {
- PRINT_WARN("fake_broadcast: write 0 or 1 to this file!\n");
return -EINVAL;
}
return count;
@@ -220,7 +215,6 @@
if (!((card->info.link_type == QETH_LINK_TYPE_HSTR) ||
(card->info.link_type == QETH_LINK_TYPE_LANE_TR))) {
- PRINT_WARN("Device is not a tokenring device!\n");
return -EINVAL;
}
@@ -233,8 +227,6 @@
card->options.broadcast_mode = QETH_TR_BROADCAST_ALLRINGS;
return count;
} else {
- PRINT_WARN("broadcast_mode: invalid mode %s!\n",
- tmp);
return -EINVAL;
}
return count;
@@ -275,7 +267,6 @@
if (!((card->info.link_type == QETH_LINK_TYPE_HSTR) ||
(card->info.link_type == QETH_LINK_TYPE_LANE_TR))) {
- PRINT_WARN("Device is not a tokenring device!\n");
return -EINVAL;
}
@@ -285,7 +276,6 @@
QETH_TR_MACADDR_CANONICAL :
QETH_TR_MACADDR_NONCANONICAL;
else {
- PRINT_WARN("canonical_macaddr: write 0 or 1 to this file!\n");
return -EINVAL;
}
return count;
@@ -327,7 +317,6 @@
else if (!strcmp(tmp, "no_checksumming"))
card->options.checksum_type = NO_CHECKSUMMING;
else {
- PRINT_WARN("Unknown checksumming type '%s'\n", tmp);
return -EINVAL;
}
return count;
@@ -382,8 +371,6 @@
} else if (!strcmp(tmp, "0")) {
card->ipato.enabled = 0;
} else {
- PRINT_WARN("ipato_enable: write 0, 1 or 'toggle' to "
- "this file\n");
return -EINVAL;
}
return count;
@@ -422,8 +409,6 @@
} else if (!strcmp(tmp, "0")) {
card->ipato.invert4 = 0;
} else {
- PRINT_WARN("ipato_invert4: write 0, 1 or 'toggle' to "
- "this file\n");
return -EINVAL;
}
return count;
@@ -486,13 +471,10 @@
/* get address string */
end = strchr(start, '/');
if (!end || (end - start >= 40)) {
- PRINT_WARN("Invalid format for ipato_addx/delx. "
- "Use <ip addr>/<mask bits>\n");
return -EINVAL;
}
strncpy(buffer, start, end - start);
if (qeth_l3_string_to_ipaddr(buffer, proto, addr)) {
- PRINT_WARN("Invalid IP address format!\n");
return -EINVAL;
}
start = end + 1;
@@ -500,7 +482,6 @@
if (!strlen(start) ||
(tmp == start) ||
(*mask_bits > ((proto == QETH_PROT_IPV4) ? 32 : 128))) {
- PRINT_WARN("Invalid mask bits for ipato_addx/delx !\n");
return -EINVAL;
}
return 0;
@@ -520,7 +501,6 @@
ipatoe = kzalloc(sizeof(struct qeth_ipato_entry), GFP_KERNEL);
if (!ipatoe) {
- PRINT_WARN("No memory to allocate ipato entry\n");
return -ENOMEM;
}
ipatoe->proto = proto;
@@ -609,8 +589,6 @@
} else if (!strcmp(tmp, "0")) {
card->ipato.invert6 = 0;
} else {
- PRINT_WARN("ipato_invert6: write 0, 1 or 'toggle' to "
- "this file\n");
return -EINVAL;
}
return count;
@@ -724,7 +702,6 @@
u8 *addr)
{
if (qeth_l3_string_to_ipaddr(buf, proto, addr)) {
- PRINT_WARN("Invalid IP address format!\n");
return -EINVAL;
}
return 0;
@@ -891,7 +868,6 @@
u8 *addr)
{
if (qeth_l3_string_to_ipaddr(buf, proto, addr)) {
- PRINT_WARN("Invalid IP address format!\n");
return -EINVAL;
}
return 0;
diff --git a/drivers/s390/s390mach.c b/drivers/s390/s390mach.c
index 5080f34..5bfbe76 100644
--- a/drivers/s390/s390mach.c
+++ b/drivers/s390/s390mach.c
@@ -207,6 +207,7 @@
do_exit(SIGSEGV);
}
}
+EXPORT_SYMBOL_GPL(s390_handle_mcck);
/*
* returns 0 if all registers could be validated
diff --git a/drivers/sbus/char/bpp.c b/drivers/sbus/char/bpp.c
index b87037e..03c9660 100644
--- a/drivers/sbus/char/bpp.c
+++ b/drivers/sbus/char/bpp.c
@@ -869,7 +869,7 @@
instances[idx].mode = COMPATIBILITY;
instances[idx].run_length = 0;
instances[idx].run_flag = 0;
- if (!request_region(lpAddr,3, dev_name)) return;
+ if (!request_region(lpAddr,3, bpp_dev_name)) return;
/*
* First, make sure the instance exists. Do this by writing to
@@ -1021,7 +1021,7 @@
if (rc == 0)
return -ENODEV;
- rc = register_chrdev(BPP_MAJOR, dev_name, &bpp_fops);
+ rc = register_chrdev(BPP_MAJOR, bpp_dev_name, &bpp_fops);
if (rc < 0)
return rc;
@@ -1037,7 +1037,7 @@
{
unsigned idx;
- unregister_chrdev(BPP_MAJOR, dev_name);
+ unregister_chrdev(BPP_MAJOR, bpp_dev_name);
for (idx = 0; idx < BPP_NO; idx++) {
if (instances[idx].present)
diff --git a/drivers/scsi/3w-9xxx.c b/drivers/scsi/3w-9xxx.c
index b31faec..867f6fd 100644
--- a/drivers/scsi/3w-9xxx.c
+++ b/drivers/scsi/3w-9xxx.c
@@ -1278,7 +1278,7 @@
error = 0;
/* Check for command packet errors */
if (full_command_packet->command.newcommand.status != 0) {
- if (tw_dev->srb[request_id] != 0) {
+ if (tw_dev->srb[request_id] != NULL) {
error = twa_fill_sense(tw_dev, request_id, 1, 1);
} else {
/* Skip ioctl error prints */
@@ -1290,7 +1290,7 @@
/* Check for correct state */
if (tw_dev->state[request_id] != TW_S_POSTED) {
- if (tw_dev->srb[request_id] != 0) {
+ if (tw_dev->srb[request_id] != NULL) {
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1a, "Received a request id that wasn't posted");
TW_CLEAR_ALL_INTERRUPTS(tw_dev);
goto twa_interrupt_bail;
@@ -1298,7 +1298,7 @@
}
/* Check for internal command completion */
- if (tw_dev->srb[request_id] == 0) {
+ if (tw_dev->srb[request_id] == NULL) {
if (request_id != tw_dev->chrdev_request_id) {
if (twa_aen_complete(tw_dev, request_id))
TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1b, "Error completing AEN during attention interrupt");
diff --git a/drivers/scsi/aha152x.c b/drivers/scsi/aha152x.c
index f5215fd..0899cb6 100644
--- a/drivers/scsi/aha152x.c
+++ b/drivers/scsi/aha152x.c
@@ -3582,7 +3582,7 @@
if (i == ARRAY_SIZE(ports))
return 0;
- if ( request_region(setup->io_port, IO_RANGE, "aha152x")==0 ) {
+ if (!request_region(setup->io_port, IO_RANGE, "aha152x")) {
printk(KERN_ERR "aha152x: io port 0x%x busy.\n", setup->io_port);
return 0;
}
@@ -3830,7 +3830,7 @@
iounmap(p);
}
if (!ok && setup_count == 0)
- return 0;
+ return -ENODEV;
printk(KERN_INFO "aha152x: BIOS test: passed, ");
#else
@@ -3842,7 +3842,7 @@
if ((setup_count == 1) && (setup[0].io_port == ports[i]))
continue;
- if ( request_region(ports[i], IO_RANGE, "aha152x")==0 ) {
+ if (!request_region(ports[i], IO_RANGE, "aha152x")) {
printk(KERN_ERR "aha152x: io port 0x%x busy.\n", ports[i]);
continue;
}
@@ -3909,14 +3909,14 @@
#endif
}
- return 1;
+ return 0;
}
static void __exit aha152x_exit(void)
{
- struct aha152x_hostdata *hd;
+ struct aha152x_hostdata *hd, *tmp;
- list_for_each_entry(hd, &aha152x_host_list, host_list) {
+ list_for_each_entry_safe(hd, tmp, &aha152x_host_list, host_list) {
struct Scsi_Host *shost = container_of((void *)hd, struct Scsi_Host, hostdata);
aha152x_release(shost);
diff --git a/drivers/scsi/atp870u.c b/drivers/scsi/atp870u.c
index db6de5e..7d31154 100644
--- a/drivers/scsi/atp870u.c
+++ b/drivers/scsi/atp870u.c
@@ -747,7 +747,7 @@
dev->quhd[c] = 0;
}
workreq = dev->quereq[c][dev->quhd[c]];
- if (dev->id[c][scmd_id(workreq)].curr_req == 0) {
+ if (dev->id[c][scmd_id(workreq)].curr_req == NULL) {
dev->id[c][scmd_id(workreq)].curr_req = workreq;
dev->last_cmd[c] = scmd_id(workreq);
goto cmd_subp;
diff --git a/drivers/scsi/ch.c b/drivers/scsi/ch.c
index 75c84d7..c4b938b 100644
--- a/drivers/scsi/ch.c
+++ b/drivers/scsi/ch.c
@@ -910,9 +910,9 @@
ch->minor = minor;
sprintf(ch->name,"ch%d",ch->minor);
- class_dev = device_create(ch_sysfs_class, dev,
- MKDEV(SCSI_CHANGER_MAJOR,ch->minor),
- "s%s", ch->name);
+ class_dev = device_create_drvdata(ch_sysfs_class, dev,
+ MKDEV(SCSI_CHANGER_MAJOR, ch->minor),
+ ch, "s%s", ch->name);
if (IS_ERR(class_dev)) {
printk(KERN_WARNING "ch%d: device_create failed\n",
ch->minor);
@@ -926,7 +926,6 @@
if (init)
ch_init_elem(ch);
- dev_set_drvdata(dev, ch);
sdev_printk(KERN_INFO, sd, "Attached scsi changer %s\n", ch->name);
return 0;
diff --git a/drivers/scsi/gdth.c b/drivers/scsi/gdth.c
index 8e2e964..46771d4 100644
--- a/drivers/scsi/gdth.c
+++ b/drivers/scsi/gdth.c
@@ -550,7 +550,6 @@
#endif /* CONFIG_ISA */
#ifdef CONFIG_PCI
-static bool gdth_pci_registered;
static bool gdth_search_vortex(ushort device)
{
@@ -3724,6 +3723,8 @@
}
#ifdef GDTH_STATISTICS
+static unchar gdth_timer_running;
+
static void gdth_timeout(ulong data)
{
ulong32 i;
@@ -3731,7 +3732,10 @@
gdth_ha_str *ha;
ulong flags;
- BUG_ON(list_empty(&gdth_instances));
+ if(unlikely(list_empty(&gdth_instances))) {
+ gdth_timer_running = 0;
+ return;
+ }
ha = list_first_entry(&gdth_instances, gdth_ha_str, list);
spin_lock_irqsave(&ha->smp_lock, flags);
@@ -3751,6 +3755,22 @@
add_timer(&gdth_timer);
spin_unlock_irqrestore(&ha->smp_lock, flags);
}
+
+static void gdth_timer_init(void)
+{
+ if (gdth_timer_running)
+ return;
+ gdth_timer_running = 1;
+ TRACE2(("gdth_detect(): Initializing timer !\n"));
+ gdth_timer.expires = jiffies + HZ;
+ gdth_timer.data = 0L;
+ gdth_timer.function = gdth_timeout;
+ add_timer(&gdth_timer);
+}
+#else
+static inline void gdth_timer_init(void)
+{
+}
#endif
static void __init internal_setup(char *str,int *ints)
@@ -4735,6 +4755,7 @@
if (error)
goto out_free_coal_stat;
list_add_tail(&ha->list, &gdth_instances);
+ gdth_timer_init();
scsi_scan_host(shp);
@@ -4865,6 +4886,7 @@
if (error)
goto out_free_coal_stat;
list_add_tail(&ha->list, &gdth_instances);
+ gdth_timer_init();
scsi_scan_host(shp);
@@ -5011,6 +5033,7 @@
list_add_tail(&ha->list, &gdth_instances);
pci_set_drvdata(ha->pdev, ha);
+ gdth_timer_init();
scsi_scan_host(shp);
@@ -5110,6 +5133,7 @@
/* initializations */
gdth_polling = TRUE;
gdth_clear_events();
+ init_timer(&gdth_timer);
/* As default we do not probe for EISA or ISA controllers */
if (probe_eisa_isa) {
@@ -5132,23 +5156,17 @@
#ifdef CONFIG_PCI
/* scanning for PCI controllers */
- if (pci_register_driver(&gdth_pci_driver) == 0)
- gdth_pci_registered = true;
+ if (pci_register_driver(&gdth_pci_driver)) {
+ gdth_ha_str *ha;
+
+ list_for_each_entry(ha, &gdth_instances, list)
+ gdth_remove_one(ha);
+ return -ENODEV;
+ }
#endif /* CONFIG_PCI */
TRACE2(("gdth_detect() %d controller detected\n", gdth_ctr_count));
- if (list_empty(&gdth_instances))
- return -ENODEV;
-
-#ifdef GDTH_STATISTICS
- TRACE2(("gdth_detect(): Initializing timer !\n"));
- init_timer(&gdth_timer);
- gdth_timer.expires = jiffies + HZ;
- gdth_timer.data = 0L;
- gdth_timer.function = gdth_timeout;
- add_timer(&gdth_timer);
-#endif
major = register_chrdev(0,"gdth", &gdth_fops);
register_reboot_notifier(&gdth_notifier);
gdth_polling = FALSE;
@@ -5167,8 +5185,7 @@
#endif
#ifdef CONFIG_PCI
- if (gdth_pci_registered)
- pci_unregister_driver(&gdth_pci_driver);
+ pci_unregister_driver(&gdth_pci_driver);
#endif
list_for_each_entry(ha, &gdth_instances, list)
diff --git a/drivers/scsi/hptiop.c b/drivers/scsi/hptiop.c
index aaa48e0..da876d3 100644
--- a/drivers/scsi/hptiop.c
+++ b/drivers/scsi/hptiop.c
@@ -444,7 +444,7 @@
if (!(pci_resource_flags(pcidev, index) & IORESOURCE_MEM)) {
printk(KERN_ERR "scsi%d: pci resource invalid\n",
hba->host->host_no);
- return 0;
+ return NULL;
}
mem_base_phy = pci_resource_start(pcidev, index);
@@ -454,7 +454,7 @@
if (!mem_base_virt) {
printk(KERN_ERR "scsi%d: Fail to ioremap memory space\n",
hba->host->host_no);
- return 0;
+ return NULL;
}
return mem_base_virt;
}
@@ -476,11 +476,11 @@
static int hptiop_map_pci_bar_mv(struct hptiop_hba *hba)
{
hba->u.mv.regs = hptiop_map_pci_bar(hba, 0);
- if (hba->u.mv.regs == 0)
+ if (hba->u.mv.regs == NULL)
return -1;
hba->u.mv.mu = hptiop_map_pci_bar(hba, 2);
- if (hba->u.mv.mu == 0) {
+ if (hba->u.mv.mu == NULL) {
iounmap(hba->u.mv.regs);
return -1;
}
@@ -1210,8 +1210,8 @@
static struct hptiop_adapter_ops hptiop_itl_ops = {
.iop_wait_ready = iop_wait_ready_itl,
- .internal_memalloc = 0,
- .internal_memfree = 0,
+ .internal_memalloc = NULL,
+ .internal_memfree = NULL,
.map_pci_bar = hptiop_map_pci_bar_itl,
.unmap_pci_bar = hptiop_unmap_pci_bar_itl,
.enable_intr = hptiop_enable_intr_itl,
diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c
index ccfd8ac..5d23368 100644
--- a/drivers/scsi/ibmvscsi/ibmvscsi.c
+++ b/drivers/scsi/ibmvscsi/ibmvscsi.c
@@ -1348,7 +1348,7 @@
del_timer(&evt_struct->timer);
- if (crq->status != VIOSRP_OK && evt_struct->cmnd)
+ if ((crq->status != VIOSRP_OK && crq->status != VIOSRP_OK2) && evt_struct->cmnd)
evt_struct->cmnd->result = DID_ERROR << 16;
if (evt_struct->done)
evt_struct->done(evt_struct);
diff --git a/drivers/scsi/ibmvscsi/viosrp.h b/drivers/scsi/ibmvscsi/viosrp.h
index 4c4aadb..2046045 100644
--- a/drivers/scsi/ibmvscsi/viosrp.h
+++ b/drivers/scsi/ibmvscsi/viosrp.h
@@ -65,7 +65,8 @@
VIOSRP_VIOLATES_MAX_XFER = 0x2,
VIOSRP_PARTNER_PANIC = 0x3,
VIOSRP_DEVICE_BUSY = 0x8,
- VIOSRP_ADAPTER_FAIL = 0x10
+ VIOSRP_ADAPTER_FAIL = 0x10,
+ VIOSRP_OK2 = 0x99,
};
struct viosrp_crq {
diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c
index 010c1b9..b43bf1d 100644
--- a/drivers/scsi/libiscsi.c
+++ b/drivers/scsi/libiscsi.c
@@ -730,7 +730,9 @@
if (iscsi_recv_pdu(conn->cls_conn, hdr, data,
datalen))
rc = ISCSI_ERR_CONN_FAILED;
- }
+ } else
+ mod_timer(&conn->transport_timer,
+ jiffies + conn->recv_timeout);
iscsi_free_mgmt_task(conn, mtask);
break;
default:
@@ -1453,19 +1455,20 @@
{
struct iscsi_conn *conn = (struct iscsi_conn *)data;
struct iscsi_session *session = conn->session;
- unsigned long timeout, next_timeout = 0, last_recv;
+ unsigned long recv_timeout, next_timeout = 0, last_recv;
spin_lock(&session->lock);
if (session->state != ISCSI_STATE_LOGGED_IN)
goto done;
- timeout = conn->recv_timeout;
- if (!timeout)
+ recv_timeout = conn->recv_timeout;
+ if (!recv_timeout)
goto done;
- timeout *= HZ;
+ recv_timeout *= HZ;
last_recv = conn->last_recv;
- if (time_before_eq(last_recv + timeout + (conn->ping_timeout * HZ),
+ if (conn->ping_mtask &&
+ time_before_eq(conn->last_ping + (conn->ping_timeout * HZ),
jiffies)) {
iscsi_conn_printk(KERN_ERR, conn, "ping timeout of %d secs "
"expired, last rx %lu, last ping %lu, "
@@ -1476,15 +1479,13 @@
return;
}
- if (time_before_eq(last_recv + timeout, jiffies)) {
- if (time_before_eq(conn->last_ping, last_recv)) {
- /* send a ping to try to provoke some traffic */
- debug_scsi("Sending nopout as ping on conn %p\n", conn);
- iscsi_send_nopout(conn, NULL);
- }
- next_timeout = last_recv + timeout + (conn->ping_timeout * HZ);
+ if (time_before_eq(last_recv + recv_timeout, jiffies)) {
+ /* send a ping to try to provoke some traffic */
+ debug_scsi("Sending nopout as ping on conn %p\n", conn);
+ iscsi_send_nopout(conn, NULL);
+ next_timeout = conn->last_ping + (conn->ping_timeout * HZ);
} else
- next_timeout = last_recv + timeout;
+ next_timeout = last_recv + recv_timeout;
debug_scsi("Setting next tmo %lu\n", next_timeout);
mod_timer(&conn->transport_timer, next_timeout);
diff --git a/drivers/scsi/mac_esp.c b/drivers/scsi/mac_esp.c
index cd37bd6..887682a 100644
--- a/drivers/scsi/mac_esp.c
+++ b/drivers/scsi/mac_esp.c
@@ -650,7 +650,7 @@
MODULE_DESCRIPTION("Mac ESP SCSI driver");
MODULE_AUTHOR("Finn Thain <fthain@telegraphics.com.au>");
-MODULE_LICENSE("GPLv2");
+MODULE_LICENSE("GPL v2");
MODULE_VERSION(DRV_VERSION);
module_init(mac_esp_init);
diff --git a/drivers/scsi/osst.c b/drivers/scsi/osst.c
index 31f7aec..243d8be 100644
--- a/drivers/scsi/osst.c
+++ b/drivers/scsi/osst.c
@@ -5695,13 +5695,12 @@
struct device *osst_member;
int err;
- osst_member = device_create(osst_sysfs_class, device, dev, "%s", name);
+ osst_member = device_create_drvdata(osst_sysfs_class, device, dev, STp, "%s", name);
if (IS_ERR(osst_member)) {
printk(KERN_WARNING "osst :W: Unable to add sysfs class member %s\n", name);
return PTR_ERR(osst_member);
}
- dev_set_drvdata(osst_member, STp);
err = device_create_file(osst_member, &dev_attr_ADR_rev);
if (err)
goto err_out;
diff --git a/drivers/scsi/qla1280.c b/drivers/scsi/qla1280.c
index fa06093..3754ab8 100644
--- a/drivers/scsi/qla1280.c
+++ b/drivers/scsi/qla1280.c
@@ -2007,7 +2007,7 @@
nv->bus[bus].config_2.req_ack_active_negation = 1;
nv->bus[bus].config_2.data_line_active_negation = 1;
nv->bus[bus].selection_timeout = 250;
- nv->bus[bus].max_queue_depth = 256;
+ nv->bus[bus].max_queue_depth = 32;
if (IS_ISP1040(ha)) {
nv->bus[bus].bus_reset_delay = 3;
@@ -2051,7 +2051,7 @@
status = qla1280_mailbox_command(ha, 0x0f, mb);
/* Save Tag queuing enable flag. */
- flag = (BIT_0 << target) & mb[0];
+ flag = (BIT_0 << target);
if (nv->bus[bus].target[target].parameter.tag_queuing)
ha->bus_settings[bus].qtag_enables |= flag;
@@ -2811,7 +2811,7 @@
/* Check for room in outstanding command list. */
for (cnt = 0; cnt < MAX_OUTSTANDING_COMMANDS &&
- ha->outstanding_cmds[cnt] != 0; cnt++);
+ ha->outstanding_cmds[cnt] != NULL; cnt++);
if (cnt >= MAX_OUTSTANDING_COMMANDS) {
status = 1;
diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c
index 2876908..8dd88fc 100644
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -70,6 +70,9 @@
case 2:
qla2x00_alloc_fw_dump(ha);
break;
+ case 3:
+ qla2x00_system_error(ha);
+ break;
}
return (count);
}
@@ -886,9 +889,13 @@
static void
qla2x00_get_host_port_type(struct Scsi_Host *shost)
{
- scsi_qla_host_t *ha = to_qla_parent(shost_priv(shost));
+ scsi_qla_host_t *ha = shost_priv(shost);
uint32_t port_type = FC_PORTTYPE_UNKNOWN;
+ if (ha->parent) {
+ fc_host_port_type(shost) = FC_PORTTYPE_NPIV;
+ return;
+ }
switch (ha->current_topology) {
case ISP_CFG_NL:
port_type = FC_PORTTYPE_LPORT;
@@ -1172,10 +1179,10 @@
qla24xx_disable_vp(vha);
qla24xx_deallocate_vp_id(vha);
- down(&ha->vport_sem);
+ mutex_lock(&ha->vport_lock);
ha->cur_vport_count--;
clear_bit(vha->vp_idx, ha->vp_idx_map);
- up(&ha->vport_sem);
+ mutex_unlock(&ha->vport_lock);
kfree(vha->node_name);
kfree(vha->port_name);
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index 299eccf..8dd60001 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -2457,7 +2457,7 @@
#define MBX_INTR_WAIT 2
#define MBX_UPDATE_FLASH_ACTIVE 3
- struct semaphore vport_sem; /* Virtual port synchronization */
+ struct mutex vport_lock; /* Virtual port synchronization */
struct completion mbx_cmd_comp; /* Serialize mbx access */
struct completion mbx_intr_comp; /* Used for completion notification */
diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h
index f882706..9b4bebe 100644
--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -228,6 +228,9 @@
extern int qla24xx_lun_reset(struct fc_port *, unsigned int);
extern int
+qla2x00_system_error(scsi_qla_host_t *);
+
+extern int
qla2x00_set_serdes_params(scsi_qla_host_t *, uint16_t, uint16_t, uint16_t);
extern int
diff --git a/drivers/scsi/qla2xxx/qla_inline.h b/drivers/scsi/qla2xxx/qla_inline.h
index e9bae27..92fafbd 100644
--- a/drivers/scsi/qla2xxx/qla_inline.h
+++ b/drivers/scsi/qla2xxx/qla_inline.h
@@ -34,7 +34,11 @@
static inline void
qla2x00_poll(scsi_qla_host_t *ha)
{
+ unsigned long flags;
+
+ local_irq_save(flags);
ha->isp_ops->intr_handler(0, ha);
+ local_irq_restore(flags);
}
static __inline__ scsi_qla_host_t *
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index 5d9a64a..ec63b79 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -272,8 +272,6 @@
uint32_t rscn_entry, host_pid;
uint8_t rscn_queue_index;
unsigned long flags;
- scsi_qla_host_t *vha;
- int i;
/* Setup to process RIO completion. */
handle_cnt = 0;
@@ -544,18 +542,10 @@
break;
case MBA_PORT_UPDATE: /* Port database update */
- if ((ha->flags.npiv_supported) && (ha->num_vhosts)) {
- for_each_mapped_vp_idx(ha, i) {
- list_for_each_entry(vha, &ha->vp_list,
- vp_list) {
- if ((mb[3] & 0xff)
- == vha->vp_idx) {
- ha = vha;
- break;
- }
- }
- }
- }
+ /* Only handle SCNs for our Vport index. */
+ if (ha->parent && ha->vp_idx != (mb[3] & 0xff))
+ break;
+
/*
* If PORT UPDATE is global (recieved LIP_OCCURED/LIP_RESET
* event etc. earlier indicating loop is down) then process
@@ -590,18 +580,12 @@
break;
case MBA_RSCN_UPDATE: /* State Change Registration */
- if ((ha->flags.npiv_supported) && (ha->num_vhosts)) {
- for_each_mapped_vp_idx(ha, i) {
- list_for_each_entry(vha, &ha->vp_list,
- vp_list) {
- if ((mb[3] & 0xff)
- == vha->vp_idx) {
- ha = vha;
- break;
- }
- }
- }
- }
+ /* Check if the Vport has issued a SCR */
+ if (ha->parent && test_bit(VP_SCR_NEEDED, &ha->vp_flags))
+ break;
+ /* Only handle SCNs for our Vport index. */
+ if (ha->parent && ha->vp_idx != (mb[3] & 0xff))
+ break;
DEBUG2(printk("scsi(%ld): Asynchronous RSCR UPDATE.\n",
ha->host_no));
@@ -1132,25 +1116,6 @@
break;
qla2x00_handle_sense(sp, sense_data, sense_len);
-
- /*
- * In case of a Underrun condition, set both the lscsi
- * status and the completion status to appropriate
- * values.
- */
- if (resid &&
- ((unsigned)(scsi_bufflen(cp) - resid) <
- cp->underflow)) {
- DEBUG2(qla_printk(KERN_INFO, ha,
- "scsi(%ld:%d:%d:%d): Mid-layer underflow "
- "detected (%x of %x bytes)...returning "
- "error status.\n", ha->host_no,
- cp->device->channel, cp->device->id,
- cp->device->lun, resid,
- scsi_bufflen(cp)));
-
- cp->result = DID_ERROR << 16 | lscsi_status;
- }
} else {
/*
* If RISC reports underrun and target does not report
@@ -1639,12 +1604,12 @@
ha = dev_id;
reg = &ha->iobase->isp24;
- spin_lock(&ha->hardware_lock);
+ spin_lock_irq(&ha->hardware_lock);
qla24xx_process_response_queue(ha);
WRT_REG_DWORD(®->hccr, HCCRX_CLR_RISC_INT);
- spin_unlock(&ha->hardware_lock);
+ spin_unlock_irq(&ha->hardware_lock);
return IRQ_HANDLED;
}
@@ -1663,7 +1628,7 @@
reg = &ha->iobase->isp24;
status = 0;
- spin_lock(&ha->hardware_lock);
+ spin_lock_irq(&ha->hardware_lock);
do {
stat = RD_REG_DWORD(®->host_status);
if (stat & HSRX_RISC_PAUSED) {
@@ -1716,7 +1681,7 @@
}
WRT_REG_DWORD(®->hccr, HCCRX_CLR_RISC_INT);
} while (0);
- spin_unlock(&ha->hardware_lock);
+ spin_unlock_irq(&ha->hardware_lock);
if (test_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags) &&
(status & MBX_INTERRUPT) && ha->flags.mbox_int) {
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index 2100604..250d2f6 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -2303,8 +2303,6 @@
return __qla24xx_issue_tmf("Lun", TCF_LUN_RESET, fcport, l);
}
-#if 0
-
int
qla2x00_system_error(scsi_qla_host_t *ha)
{
@@ -2312,7 +2310,7 @@
mbx_cmd_t mc;
mbx_cmd_t *mcp = &mc;
- if (!IS_FWI2_CAPABLE(ha))
+ if (!IS_QLA23XX(ha) && !IS_FWI2_CAPABLE(ha))
return QLA_FUNCTION_FAILED;
DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no));
@@ -2334,8 +2332,6 @@
return rval;
}
-#endif /* 0 */
-
/**
* qla2x00_set_serdes_params() -
* @ha: HA context
@@ -2508,7 +2504,7 @@
if (mb)
memcpy(mb, mcp->mb, 8 * sizeof(*mb));
if (dwords)
- *dwords = mcp->mb[6];
+ *dwords = buffers;
}
return rval;
@@ -2807,9 +2803,9 @@
*/
map = (vp_index - 1) / 8;
pos = (vp_index - 1) & 7;
- down(&ha->vport_sem);
+ mutex_lock(&ha->vport_lock);
vce->vp_idx_map[map] |= 1 << pos;
- up(&ha->vport_sem);
+ mutex_unlock(&ha->vport_lock);
rval = qla2x00_issue_iocb(ha, vce, vce_dma, 0);
if (rval != QLA_SUCCESS) {
diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c
index f2b0497..62a3ad6 100644
--- a/drivers/scsi/qla2xxx/qla_mid.c
+++ b/drivers/scsi/qla2xxx/qla_mid.c
@@ -32,12 +32,12 @@
scsi_qla_host_t *ha = vha->parent;
/* Find an empty slot and assign an vp_id */
- down(&ha->vport_sem);
+ mutex_lock(&ha->vport_lock);
vp_id = find_first_zero_bit(ha->vp_idx_map, ha->max_npiv_vports + 1);
if (vp_id > ha->max_npiv_vports) {
DEBUG15(printk ("vp_id %d is bigger than max-supported %d.\n",
vp_id, ha->max_npiv_vports));
- up(&ha->vport_sem);
+ mutex_unlock(&ha->vport_lock);
return vp_id;
}
@@ -45,7 +45,7 @@
ha->num_vhosts++;
vha->vp_idx = vp_id;
list_add_tail(&vha->vp_list, &ha->vp_list);
- up(&ha->vport_sem);
+ mutex_unlock(&ha->vport_lock);
return vp_id;
}
@@ -55,12 +55,12 @@
uint16_t vp_id;
scsi_qla_host_t *ha = vha->parent;
- down(&ha->vport_sem);
+ mutex_lock(&ha->vport_lock);
vp_id = vha->vp_idx;
ha->num_vhosts--;
clear_bit(vp_id, ha->vp_idx_map);
list_del(&vha->vp_list);
- up(&ha->vport_sem);
+ mutex_unlock(&ha->vport_lock);
}
static scsi_qla_host_t *
@@ -145,9 +145,9 @@
}
/* Initialize the new vport unless it is a persistent port */
- down(&ha->vport_sem);
+ mutex_lock(&ha->vport_lock);
ret = qla24xx_modify_vp_config(vha);
- up(&ha->vport_sem);
+ mutex_unlock(&ha->vport_lock);
if (ret != QLA_SUCCESS) {
fc_vport_set_state(vha->fc_vport, FC_VPORT_FAILED);
@@ -406,6 +406,7 @@
INIT_LIST_HEAD(&vha->list);
INIT_LIST_HEAD(&vha->fcports);
INIT_LIST_HEAD(&vha->vp_fcports);
+ INIT_LIST_HEAD(&vha->work_list);
vha->dpc_flags = 0L;
set_bit(REGISTER_FDMI_NEEDED, &vha->dpc_flags);
@@ -437,10 +438,10 @@
vha->flags.init_done = 1;
num_hosts++;
- down(&ha->vport_sem);
+ mutex_lock(&ha->vport_lock);
set_bit(vha->vp_idx, ha->vp_idx_map);
ha->cur_vport_count++;
- up(&ha->vport_sem);
+ mutex_unlock(&ha->vport_lock);
return vha;
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 3223fd1..48eaa3b 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -10,6 +10,7 @@
#include <linux/vmalloc.h>
#include <linux/delay.h>
#include <linux/kthread.h>
+#include <linux/mutex.h>
#include <scsi/scsi_tcq.h>
#include <scsi/scsicam.h>
@@ -1631,7 +1632,7 @@
/* load the F/W, read paramaters, and init the H/W */
ha->instance = num_hosts;
- init_MUTEX(&ha->vport_sem);
+ mutex_init(&ha->vport_lock);
init_completion(&ha->mbx_cmd_comp);
complete(&ha->mbx_cmd_comp);
init_completion(&ha->mbx_intr_comp);
@@ -2156,13 +2157,14 @@
qla2x00_post_work(struct scsi_qla_host *ha, struct qla_work_evt *e, int locked)
{
unsigned long flags;
+ scsi_qla_host_t *pha = to_qla_parent(ha);
if (!locked)
- spin_lock_irqsave(&ha->hardware_lock, flags);
+ spin_lock_irqsave(&pha->hardware_lock, flags);
list_add_tail(&e->list, &ha->work_list);
qla2xxx_wake_dpc(ha);
if (!locked)
- spin_unlock_irqrestore(&ha->hardware_lock, flags);
+ spin_unlock_irqrestore(&pha->hardware_lock, flags);
return QLA_SUCCESS;
}
@@ -2202,12 +2204,13 @@
qla2x00_do_work(struct scsi_qla_host *ha)
{
struct qla_work_evt *e;
+ scsi_qla_host_t *pha = to_qla_parent(ha);
- spin_lock_irq(&ha->hardware_lock);
+ spin_lock_irq(&pha->hardware_lock);
while (!list_empty(&ha->work_list)) {
e = list_entry(ha->work_list.next, struct qla_work_evt, list);
list_del_init(&e->list);
- spin_unlock_irq(&ha->hardware_lock);
+ spin_unlock_irq(&pha->hardware_lock);
switch (e->type) {
case QLA_EVT_AEN:
@@ -2221,9 +2224,9 @@
}
if (e->flags & QLA_EVT_FLAG_FREE)
kfree(e);
- spin_lock_irq(&ha->hardware_lock);
+ spin_lock_irq(&pha->hardware_lock);
}
- spin_unlock_irq(&ha->hardware_lock);
+ spin_unlock_irq(&pha->hardware_lock);
}
/**************************************************************************
@@ -2634,7 +2637,7 @@
#define FW_FILE_ISP24XX "ql2400_fw.bin"
#define FW_FILE_ISP25XX "ql2500_fw.bin"
-static DECLARE_MUTEX(qla_fw_lock);
+static DEFINE_MUTEX(qla_fw_lock);
static struct fw_blob qla_fw_blobs[FW_BLOBS] = {
{ .name = FW_FILE_ISP21XX, .segs = { 0x1000, 0 }, },
@@ -2665,7 +2668,7 @@
blob = &qla_fw_blobs[FW_ISP25XX];
}
- down(&qla_fw_lock);
+ mutex_lock(&qla_fw_lock);
if (blob->fw)
goto out;
@@ -2678,7 +2681,7 @@
}
out:
- up(&qla_fw_lock);
+ mutex_unlock(&qla_fw_lock);
return blob;
}
@@ -2687,11 +2690,11 @@
{
int idx;
- down(&qla_fw_lock);
+ mutex_lock(&qla_fw_lock);
for (idx = 0; idx < FW_BLOBS; idx++)
if (qla_fw_blobs[idx].fw)
release_firmware(qla_fw_blobs[idx].fw);
- up(&qla_fw_lock);
+ mutex_unlock(&qla_fw_lock);
}
static pci_ers_result_t
@@ -2864,7 +2867,8 @@
return -ENODEV;
}
- printk(KERN_INFO "QLogic Fibre Channel HBA Driver\n");
+ printk(KERN_INFO "QLogic Fibre Channel HBA Driver: %s\n",
+ qla2x00_version_str);
ret = pci_register_driver(&qla2xxx_pci_driver);
if (ret) {
kmem_cache_destroy(srb_cachep);
diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h
index afeae2b..d058c88 100644
--- a/drivers/scsi/qla2xxx/qla_version.h
+++ b/drivers/scsi/qla2xxx/qla_version.h
@@ -7,7 +7,7 @@
/*
* Driver version
*/
-#define QLA2XXX_VERSION "8.02.01-k2"
+#define QLA2XXX_VERSION "8.02.01-k4"
#define QLA_DRIVER_MAJOR_VER 8
#define QLA_DRIVER_MINOR_VER 2
diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c
index 049103f..93d2b67 100644
--- a/drivers/scsi/scsi_sysfs.c
+++ b/drivers/scsi/scsi_sysfs.c
@@ -359,7 +359,12 @@
static int scsi_bus_uevent(struct device *dev, struct kobj_uevent_env *env)
{
- struct scsi_device *sdev = to_scsi_device(dev);
+ struct scsi_device *sdev;
+
+ if (dev->type != &scsi_dev_type)
+ return 0;
+
+ sdev = to_scsi_device(dev);
add_uevent_var(env, "MODALIAS=" SCSI_DEVICE_MODALIAS_FMT, sdev->type);
return 0;
diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c
index c9d7f72..ea0edd1 100644
--- a/drivers/scsi/sg.c
+++ b/drivers/scsi/sg.c
@@ -1441,17 +1441,18 @@
if (sg_sysfs_valid) {
struct device *sg_class_member;
- sg_class_member = device_create(sg_sysfs_class, cl_dev->parent,
- MKDEV(SCSI_GENERIC_MAJOR,
- sdp->index),
- "%s", disk->disk_name);
+ sg_class_member = device_create_drvdata(sg_sysfs_class,
+ cl_dev->parent,
+ MKDEV(SCSI_GENERIC_MAJOR,
+ sdp->index),
+ sdp,
+ "%s", disk->disk_name);
if (IS_ERR(sg_class_member)) {
printk(KERN_ERR "sg_add: "
"device_create failed\n");
error = PTR_ERR(sg_class_member);
goto cdev_add_err;
}
- dev_set_drvdata(sg_class_member, sdp);
error = sysfs_create_link(&scsidp->sdev_gendev.kobj,
&sg_class_member->kobj, "generic");
if (error)
diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c
index e8db66a..6e5a5bb 100644
--- a/drivers/scsi/st.c
+++ b/drivers/scsi/st.c
@@ -4424,17 +4424,19 @@
snprintf(name, 10, "%s%s%s", rew ? "n" : "",
STp->disk->disk_name, st_formats[i]);
st_class_member =
- device_create(st_sysfs_class, &STp->device->sdev_gendev,
- MKDEV(SCSI_TAPE_MAJOR,
- TAPE_MINOR(dev_num, mode, rew)),
- "%s", name);
+ device_create_drvdata(st_sysfs_class,
+ &STp->device->sdev_gendev,
+ MKDEV(SCSI_TAPE_MAJOR,
+ TAPE_MINOR(dev_num,
+ mode, rew)),
+ &STp->modes[mode],
+ "%s", name);
if (IS_ERR(st_class_member)) {
printk(KERN_WARNING "st%d: device_create failed\n",
dev_num);
error = PTR_ERR(st_class_member);
goto out;
}
- dev_set_drvdata(st_class_member, &STp->modes[mode]);
error = device_create_file(st_class_member,
&dev_attr_defined);
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index a1ca9b7..1bc00b7 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -93,7 +93,6 @@
#define CONFIG_HUB6 1
#include <asm/serial.h>
-
/*
* SERIAL_PORT_DFNS tells us about built-in ports that have no
* standard enumeration mechanism. Platforms that can find all
diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c
index 53fa19c..788c3559 100644
--- a/drivers/serial/8250_pci.c
+++ b/drivers/serial/8250_pci.c
@@ -2602,7 +2602,12 @@
{ PCI_VENDOR_ID_INTASHIELD, PCI_DEVICE_ID_INTASHIELD_IS200,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, /* 135a.0811 */
pbn_b2_2_115200 },
-
+ /*
+ * IntaShield IS-400
+ */
+ { PCI_VENDOR_ID_INTASHIELD, PCI_DEVICE_ID_INTASHIELD_IS400,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, /* 135a.0dc0 */
+ pbn_b2_4_115200 },
/*
* Perle PCI-RAS cards
*/
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 36acbcc..9bc4276 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -976,11 +976,15 @@
depends on SERIAL_68328
config SERIAL_COLDFIRE
- bool "ColdFire serial support"
+ bool "ColdFire serial support (DEPRECATED)"
depends on COLDFIRE
help
This driver supports the built-in serial ports of the Motorola ColdFire
family of CPUs.
+ This driver is deprecated because it supports only the old interface
+ for serial drivers and features like magic keys are not working.
+ Please switch to the new style driver because this driver will be
+ removed soon.
config SERIAL_MCF
bool "Coldfire serial support (new style driver)"
@@ -1357,7 +1361,7 @@
config SERIAL_BFIN_SPORT
tristate "Blackfin SPORT emulate UART (EXPERIMENTAL)"
- depends on BFIN && EXPERIMENTAL
+ depends on BLACKFIN && EXPERIMENTAL
select SERIAL_CORE
help
Enble support SPORT emulate UART on Blackfin series.
diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c
index c065a70..42be8b01 100644
--- a/drivers/serial/atmel_serial.c
+++ b/drivers/serial/atmel_serial.c
@@ -1318,7 +1318,7 @@
* If the baud rate generator isn't running, the port wasn't
* initialized by the boot loader.
*/
- quot = UART_GET_BRGR(port);
+ quot = UART_GET_BRGR(port) & ATMEL_US_CD;
if (!quot)
return;
diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index d6b4ead..f20952c 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -530,11 +530,7 @@
if (uart->cts_pin < 0)
return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
-# ifdef BF54x
- if (UART_GET_MSR(uart) & CTS)
-# else
- if (gpio_get_value(uart->cts_pin))
-# endif
+ if (UART_GET_CTS(uart))
return TIOCM_DSR | TIOCM_CAR;
else
#endif
@@ -549,17 +545,9 @@
return;
if (mctrl & TIOCM_RTS)
-# ifdef BF54x
- UART_PUT_MCR(uart, UART_GET_MCR(uart) & ~MRTS);
-# else
- gpio_set_value(uart->rts_pin, 0);
-# endif
+ UART_CLEAR_RTS(uart);
else
-# ifdef BF54x
- UART_PUT_MCR(uart, UART_GET_MCR(uart) | MRTS);
-# else
- gpio_set_value(uart->rts_pin, 1);
-# endif
+ UART_SET_RTS(uart);
#endif
}
@@ -752,11 +740,7 @@
/* Disable UART */
ier = UART_GET_IER(uart);
-#ifdef CONFIG_BF54x
- UART_CLEAR_IER(uart, 0xF);
-#else
- UART_PUT_IER(uart, 0);
-#endif
+ UART_DISABLE_INTS(uart);
/* Set DLAB in LCR to Access DLL and DLH */
UART_SET_DLAB(uart);
@@ -771,11 +755,7 @@
UART_PUT_LCR(uart, lcr);
/* Enable UART */
-#ifdef CONFIG_BF54x
- UART_SET_IER(uart, ier);
-#else
- UART_PUT_IER(uart, ier);
-#endif
+ UART_ENABLE_INTS(uart, ier);
val = UART_GET_GCTL(uart);
val |= UCEN;
@@ -833,15 +813,15 @@
* Enable the IrDA function if tty->ldisc.num is N_IRDA.
* In other cases, disable IrDA function.
*/
-static void bfin_set_ldisc(struct tty_struct *tty)
+static void bfin_serial_set_ldisc(struct uart_port *port)
{
- int line = tty->index;
+ int line = port->line;
unsigned short val;
- if (line >= tty->driver->num)
+ if (line >= port->info->tty->driver->num)
return;
- switch (tty->ldisc.num) {
+ switch (port->info->tty->ldisc.num) {
case N_IRDA:
val = UART_GET_GCTL(&bfin_serial_ports[line]);
val |= (IREN | RPOLC);
@@ -866,6 +846,7 @@
.startup = bfin_serial_startup,
.shutdown = bfin_serial_shutdown,
.set_termios = bfin_serial_set_termios,
+ .set_ldisc = bfin_serial_set_ldisc,
.type = bfin_serial_type,
.release_port = bfin_serial_release_port,
.request_port = bfin_serial_request_port,
@@ -1206,7 +1187,6 @@
ret = uart_register_driver(&bfin_serial_reg);
if (ret == 0) {
- bfin_serial_reg.tty_driver->set_ldisc = bfin_set_ldisc;
ret = platform_driver_register(&bfin_serial_driver);
if (ret) {
pr_debug("uart register failed\n");
diff --git a/drivers/serial/crisv10.c b/drivers/serial/crisv10.c
index f9fa237..3e0366e 100644
--- a/drivers/serial/crisv10.c
+++ b/drivers/serial/crisv10.c
@@ -3808,7 +3808,7 @@
shutdown(info);
rs_flush_buffer(tty);
- tty_ldisc_flush_buffer(tty);
+ tty_ldisc_flush(tty);
tty->closing = 0;
info->event = 0;
info->tty = 0;
diff --git a/drivers/serial/mcfserial.c b/drivers/serial/mcfserial.c
index 43af40d..56007cc 100644
--- a/drivers/serial/mcfserial.c
+++ b/drivers/serial/mcfserial.c
@@ -1,3 +1,4 @@
+#warning This driver is deprecated. Check Kconfig for details.
/*
* mcfserial.c -- serial driver for ColdFire internal UARTS.
*
diff --git a/drivers/serial/sb1250-duart.c b/drivers/serial/sb1250-duart.c
index 2d6c08b..f8e1447 100644
--- a/drivers/serial/sb1250-duart.c
+++ b/drivers/serial/sb1250-duart.c
@@ -924,7 +924,7 @@
static struct uart_driver sbd_reg = {
.owner = THIS_MODULE,
- .driver_name = "serial",
+ .driver_name = "sb1250_duart",
.dev_name = "duart",
.major = TTY_MAJOR,
.minor = SB1250_DUART_MINOR_BASE,
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index eab0327..c9b64e7 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -1165,6 +1165,15 @@
return ret;
}
+static void uart_set_ldisc(struct tty_struct *tty)
+{
+ struct uart_state *state = tty->driver_data;
+ struct uart_port *port = state->port;
+
+ if (port->ops->set_ldisc)
+ port->ops->set_ldisc(port);
+}
+
static void uart_set_termios(struct tty_struct *tty,
struct ktermios *old_termios)
{
@@ -2054,6 +2063,8 @@
int uart_resume_port(struct uart_driver *drv, struct uart_port *port)
{
struct uart_state *state = drv->state + port->line;
+ struct device *tty_dev;
+ struct uart_match match = {port, drv};
mutex_lock(&state->mutex);
@@ -2063,7 +2074,8 @@
return 0;
}
- if (!port->suspended) {
+ tty_dev = device_find_child(port->dev, &match, serial_match_port);
+ if (!port->suspended && device_may_wakeup(tty_dev)) {
disable_irq_wake(port->irq);
mutex_unlock(&state->mutex);
return 0;
@@ -2285,6 +2297,7 @@
.unthrottle = uart_unthrottle,
.send_xchar = uart_send_xchar,
.set_termios = uart_set_termios,
+ .set_ldisc = uart_set_ldisc,
.stop = uart_stop,
.start = uart_start,
.hangup = uart_hangup,
diff --git a/drivers/serial/sh-sci.c b/drivers/serial/sh-sci.c
index 8fdafc2..ce6ee92 100644
--- a/drivers/serial/sh-sci.c
+++ b/drivers/serial/sh-sci.c
@@ -184,15 +184,15 @@
int h, l;
c = *p++;
- h = highhex(c);
- l = lowhex(c);
+ h = hex_asc_hi(c);
+ l = hex_asc_lo(c);
put_char(port, h);
put_char(port, l);
checksum += h + l;
}
put_char(port, '#');
- put_char(port, highhex(checksum));
- put_char(port, lowhex(checksum));
+ put_char(port, hex_asc_hi(checksum));
+ put_char(port, hex_asc_lo(checksum));
} while (get_char(port) != '+');
} else
#endif /* CONFIG_SH_STANDARD_BIOS || CONFIG_SH_KGDB */
diff --git a/drivers/serial/sunhv.c b/drivers/serial/sunhv.c
index 145c028..2847336 100644
--- a/drivers/serial/sunhv.c
+++ b/drivers/serial/sunhv.c
@@ -499,7 +499,6 @@
} else
spin_lock(&port->lock);
- spin_lock_irqsave(&port->lock, flags);
for (i = 0; i < n; i++) {
if (*s == '\n')
sunhv_console_putchar(port, '\r');
diff --git a/drivers/serial/ucc_uart.c b/drivers/serial/ucc_uart.c
index 01917c4..566a8b4 100644
--- a/drivers/serial/ucc_uart.c
+++ b/drivers/serial/ucc_uart.c
@@ -195,7 +195,7 @@
static struct uart_driver ucc_uart_driver = {
.owner = THIS_MODULE,
- .driver_name = "serial",
+ .driver_name = "ucc_uart",
.dev_name = "ttyQE",
.major = SERIAL_QE_MAJOR,
.minor = SERIAL_QE_MINOR,
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index fae9e8f..66ec5d8 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -126,7 +126,6 @@
config SPI_MPC83xx
tristate "Freescale MPC83xx/QUICC Engine SPI controller"
depends on SPI_MASTER && (PPC_83xx || QUICC_ENGINE) && EXPERIMENTAL
- select SPI_BITBANG
help
This enables using the Freescale MPC83xx and QUICC Engine SPI
controllers in master mode.
diff --git a/drivers/spi/mpc52xx_psc_spi.c b/drivers/spi/mpc52xx_psc_spi.c
index 90729469..681d623 100644
--- a/drivers/spi/mpc52xx_psc_spi.c
+++ b/drivers/spi/mpc52xx_psc_spi.c
@@ -1,5 +1,5 @@
/*
- * MPC52xx SPC in SPI mode driver.
+ * MPC52xx PSC in SPI mode driver.
*
* Maintainer: Dragos Carp
*
diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c
index 654bb58..0c452c4 100644
--- a/drivers/spi/pxa2xx_spi.c
+++ b/drivers/spi/pxa2xx_spi.c
@@ -1567,7 +1567,7 @@
int status = 0;
/* Enable the SSP clock */
- clk_disable(ssp->clk);
+ clk_enable(ssp->clk);
/* Start the queue running */
status = start_queue(drv_data);
diff --git a/drivers/spi/spi_mpc83xx.c b/drivers/spi/spi_mpc83xx.c
index 189f706..6832da6 100644
--- a/drivers/spi/spi_mpc83xx.c
+++ b/drivers/spi/spi_mpc83xx.c
@@ -49,6 +49,7 @@
#define SPMODE_LEN(x) ((x) << 20)
#define SPMODE_PM(x) ((x) << 16)
#define SPMODE_OP (1 << 14)
+#define SPMODE_CG(x) ((x) << 7)
/*
* Default for SPI Mode:
@@ -67,10 +68,6 @@
/* SPI Controller driver's private data. */
struct mpc83xx_spi {
- /* bitbang has to be first */
- struct spi_bitbang bitbang;
- struct completion done;
-
struct mpc83xx_spi_reg __iomem *base;
/* rx & tx bufs from the spi_transfer */
@@ -82,7 +79,7 @@
u32(*get_tx) (struct mpc83xx_spi *);
unsigned int count;
- u32 irq;
+ int irq;
unsigned nsecs; /* (clock cycle time)/2 */
@@ -94,6 +91,25 @@
void (*activate_cs) (u8 cs, u8 polarity);
void (*deactivate_cs) (u8 cs, u8 polarity);
+
+ u8 busy;
+
+ struct workqueue_struct *workqueue;
+ struct work_struct work;
+
+ struct list_head queue;
+ spinlock_t lock;
+
+ struct completion done;
+};
+
+struct spi_mpc83xx_cs {
+ /* functions to deal with different sized buffers */
+ void (*get_rx) (u32 rx_data, struct mpc83xx_spi *);
+ u32 (*get_tx) (struct mpc83xx_spi *);
+ u32 rx_shift; /* RX data reg shift when in qe mode */
+ u32 tx_shift; /* TX data reg shift when in qe mode */
+ u32 hw_mode; /* Holds HW mode register settings */
};
static inline void mpc83xx_spi_write_reg(__be32 __iomem * reg, u32 val)
@@ -137,6 +153,7 @@
{
struct mpc83xx_spi *mpc83xx_spi;
u8 pol = spi->mode & SPI_CS_HIGH ? 1 : 0;
+ struct spi_mpc83xx_cs *cs = spi->controller_state;
mpc83xx_spi = spi_master_get_devdata(spi->master);
@@ -147,50 +164,26 @@
if (value == BITBANG_CS_ACTIVE) {
u32 regval = mpc83xx_spi_read_reg(&mpc83xx_spi->base->mode);
- u32 len = spi->bits_per_word;
- u8 pm;
- if (len == 32)
- len = 0;
- else
- len = len - 1;
+ mpc83xx_spi->rx_shift = cs->rx_shift;
+ mpc83xx_spi->tx_shift = cs->tx_shift;
+ mpc83xx_spi->get_rx = cs->get_rx;
+ mpc83xx_spi->get_tx = cs->get_tx;
- /* mask out bits we are going to set */
- regval &= ~(SPMODE_CP_BEGIN_EDGECLK | SPMODE_CI_INACTIVEHIGH
- | SPMODE_LEN(0xF) | SPMODE_DIV16
- | SPMODE_PM(0xF) | SPMODE_REV | SPMODE_LOOP);
+ if (cs->hw_mode != regval) {
+ unsigned long flags;
+ void *tmp_ptr = &mpc83xx_spi->base->mode;
- if (spi->mode & SPI_CPHA)
- regval |= SPMODE_CP_BEGIN_EDGECLK;
- if (spi->mode & SPI_CPOL)
- regval |= SPMODE_CI_INACTIVEHIGH;
- if (!(spi->mode & SPI_LSB_FIRST))
- regval |= SPMODE_REV;
- if (spi->mode & SPI_LOOP)
- regval |= SPMODE_LOOP;
-
- regval |= SPMODE_LEN(len);
-
- if ((mpc83xx_spi->spibrg / spi->max_speed_hz) >= 64) {
- pm = mpc83xx_spi->spibrg / (spi->max_speed_hz * 64) - 1;
- if (pm > 0x0f) {
- dev_err(&spi->dev, "Requested speed is too "
- "low: %d Hz. Will use %d Hz instead.\n",
- spi->max_speed_hz,
- mpc83xx_spi->spibrg / 1024);
- pm = 0x0f;
- }
- regval |= SPMODE_PM(pm) | SPMODE_DIV16;
- } else {
- pm = mpc83xx_spi->spibrg / (spi->max_speed_hz * 4);
- if (pm)
- pm--;
- regval |= SPMODE_PM(pm);
+ regval = cs->hw_mode;
+ /* Turn off IRQs locally to minimize time that
+ * SPI is disabled
+ */
+ local_irq_save(flags);
+ /* Turn off SPI unit prior changing mode */
+ mpc83xx_spi_write_reg(tmp_ptr, regval & ~SPMODE_ENABLE);
+ mpc83xx_spi_write_reg(tmp_ptr, regval);
+ local_irq_restore(flags);
}
-
- /* Turn off SPI unit prior changing mode */
- mpc83xx_spi_write_reg(&mpc83xx_spi->base->mode, 0);
- mpc83xx_spi_write_reg(&mpc83xx_spi->base->mode, regval);
if (mpc83xx_spi->activate_cs)
mpc83xx_spi->activate_cs(spi->chip_select, pol);
}
@@ -201,8 +194,9 @@
{
struct mpc83xx_spi *mpc83xx_spi;
u32 regval;
- u8 bits_per_word;
+ u8 bits_per_word, pm;
u32 hz;
+ struct spi_mpc83xx_cs *cs = spi->controller_state;
mpc83xx_spi = spi_master_get_devdata(spi->master);
@@ -223,122 +217,106 @@
|| ((bits_per_word > 16) && (bits_per_word != 32)))
return -EINVAL;
- mpc83xx_spi->rx_shift = 0;
- mpc83xx_spi->tx_shift = 0;
+ if (!hz)
+ hz = spi->max_speed_hz;
+
+ cs->rx_shift = 0;
+ cs->tx_shift = 0;
if (bits_per_word <= 8) {
- mpc83xx_spi->get_rx = mpc83xx_spi_rx_buf_u8;
- mpc83xx_spi->get_tx = mpc83xx_spi_tx_buf_u8;
+ cs->get_rx = mpc83xx_spi_rx_buf_u8;
+ cs->get_tx = mpc83xx_spi_tx_buf_u8;
if (mpc83xx_spi->qe_mode) {
- mpc83xx_spi->rx_shift = 16;
- mpc83xx_spi->tx_shift = 24;
+ cs->rx_shift = 16;
+ cs->tx_shift = 24;
}
} else if (bits_per_word <= 16) {
- mpc83xx_spi->get_rx = mpc83xx_spi_rx_buf_u16;
- mpc83xx_spi->get_tx = mpc83xx_spi_tx_buf_u16;
+ cs->get_rx = mpc83xx_spi_rx_buf_u16;
+ cs->get_tx = mpc83xx_spi_tx_buf_u16;
if (mpc83xx_spi->qe_mode) {
- mpc83xx_spi->rx_shift = 16;
- mpc83xx_spi->tx_shift = 16;
+ cs->rx_shift = 16;
+ cs->tx_shift = 16;
}
} else if (bits_per_word <= 32) {
- mpc83xx_spi->get_rx = mpc83xx_spi_rx_buf_u32;
- mpc83xx_spi->get_tx = mpc83xx_spi_tx_buf_u32;
+ cs->get_rx = mpc83xx_spi_rx_buf_u32;
+ cs->get_tx = mpc83xx_spi_tx_buf_u32;
} else
return -EINVAL;
if (mpc83xx_spi->qe_mode && spi->mode & SPI_LSB_FIRST) {
- mpc83xx_spi->tx_shift = 0;
+ cs->tx_shift = 0;
if (bits_per_word <= 8)
- mpc83xx_spi->rx_shift = 8;
+ cs->rx_shift = 8;
else
- mpc83xx_spi->rx_shift = 0;
+ cs->rx_shift = 0;
}
- /* nsecs = (clock period)/2 */
- if (!hz)
- hz = spi->max_speed_hz;
- mpc83xx_spi->nsecs = (1000000000 / 2) / hz;
- if (mpc83xx_spi->nsecs > MAX_UDELAY_MS * 1000)
- return -EINVAL;
+ mpc83xx_spi->rx_shift = cs->rx_shift;
+ mpc83xx_spi->tx_shift = cs->tx_shift;
+ mpc83xx_spi->get_rx = cs->get_rx;
+ mpc83xx_spi->get_tx = cs->get_tx;
if (bits_per_word == 32)
bits_per_word = 0;
else
bits_per_word = bits_per_word - 1;
- regval = mpc83xx_spi_read_reg(&mpc83xx_spi->base->mode);
-
/* mask out bits we are going to set */
- regval &= ~(SPMODE_LEN(0xF) | SPMODE_REV);
- regval |= SPMODE_LEN(bits_per_word);
- if (!(spi->mode & SPI_LSB_FIRST))
- regval |= SPMODE_REV;
+ cs->hw_mode &= ~(SPMODE_LEN(0xF) | SPMODE_DIV16
+ | SPMODE_PM(0xF));
- /* Turn off SPI unit prior changing mode */
- mpc83xx_spi_write_reg(&mpc83xx_spi->base->mode, 0);
- mpc83xx_spi_write_reg(&mpc83xx_spi->base->mode, regval);
+ cs->hw_mode |= SPMODE_LEN(bits_per_word);
- return 0;
-}
-
-/* the spi->mode bits understood by this driver: */
-#define MODEBITS (SPI_CPOL | SPI_CPHA | SPI_CS_HIGH \
- | SPI_LSB_FIRST | SPI_LOOP)
-
-static int mpc83xx_spi_setup(struct spi_device *spi)
-{
- struct spi_bitbang *bitbang;
- struct mpc83xx_spi *mpc83xx_spi;
- int retval;
-
- if (spi->mode & ~MODEBITS) {
- dev_dbg(&spi->dev, "setup: unsupported mode bits %x\n",
- spi->mode & ~MODEBITS);
- return -EINVAL;
+ if ((mpc83xx_spi->spibrg / hz) >= 64) {
+ pm = mpc83xx_spi->spibrg / (hz * 64) - 1;
+ if (pm > 0x0f) {
+ dev_err(&spi->dev, "Requested speed is too "
+ "low: %d Hz. Will use %d Hz instead.\n",
+ hz, mpc83xx_spi->spibrg / 1024);
+ pm = 0x0f;
+ }
+ cs->hw_mode |= SPMODE_PM(pm) | SPMODE_DIV16;
+ } else {
+ pm = mpc83xx_spi->spibrg / (hz * 4);
+ if (pm)
+ pm--;
+ cs->hw_mode |= SPMODE_PM(pm);
}
+ regval = mpc83xx_spi_read_reg(&mpc83xx_spi->base->mode);
+ if (cs->hw_mode != regval) {
+ unsigned long flags;
+ void *tmp_ptr = &mpc83xx_spi->base->mode;
- if (!spi->max_speed_hz)
- return -EINVAL;
-
- bitbang = spi_master_get_devdata(spi->master);
- mpc83xx_spi = spi_master_get_devdata(spi->master);
-
- if (!spi->bits_per_word)
- spi->bits_per_word = 8;
-
- retval = mpc83xx_spi_setup_transfer(spi, NULL);
- if (retval < 0)
- return retval;
-
- dev_dbg(&spi->dev, "%s, mode %d, %u bits/w, %u nsec\n",
- __func__, spi->mode & (SPI_CPOL | SPI_CPHA),
- spi->bits_per_word, 2 * mpc83xx_spi->nsecs);
-
- /* NOTE we _need_ to call chipselect() early, ideally with adapter
- * setup, unless the hardware defaults cooperate to avoid confusion
- * between normal (active low) and inverted chipselects.
- */
-
- /* deselect chip (low or high) */
- spin_lock(&bitbang->lock);
- if (!bitbang->busy) {
- bitbang->chipselect(spi, BITBANG_CS_INACTIVE);
- ndelay(mpc83xx_spi->nsecs);
+ regval = cs->hw_mode;
+ /* Turn off IRQs locally to minimize time
+ * that SPI is disabled
+ */
+ local_irq_save(flags);
+ /* Turn off SPI unit prior changing mode */
+ mpc83xx_spi_write_reg(tmp_ptr, regval & ~SPMODE_ENABLE);
+ mpc83xx_spi_write_reg(tmp_ptr, regval);
+ local_irq_restore(flags);
}
- spin_unlock(&bitbang->lock);
-
return 0;
}
static int mpc83xx_spi_bufs(struct spi_device *spi, struct spi_transfer *t)
{
struct mpc83xx_spi *mpc83xx_spi;
- u32 word;
+ u32 word, len, bits_per_word;
mpc83xx_spi = spi_master_get_devdata(spi->master);
mpc83xx_spi->tx = t->tx_buf;
mpc83xx_spi->rx = t->rx_buf;
- mpc83xx_spi->count = t->len;
+ bits_per_word = spi->bits_per_word;
+ if (t->bits_per_word)
+ bits_per_word = t->bits_per_word;
+ len = t->len;
+ if (bits_per_word > 8)
+ len /= 2;
+ if (bits_per_word > 16)
+ len /= 2;
+ mpc83xx_spi->count = len;
INIT_COMPLETION(mpc83xx_spi->done);
/* enable rx ints */
@@ -353,7 +331,147 @@
/* disable rx ints */
mpc83xx_spi_write_reg(&mpc83xx_spi->base->mask, 0);
- return t->len - mpc83xx_spi->count;
+ return mpc83xx_spi->count;
+}
+
+static void mpc83xx_spi_work(struct work_struct *work)
+{
+ struct mpc83xx_spi *mpc83xx_spi =
+ container_of(work, struct mpc83xx_spi, work);
+
+ spin_lock_irq(&mpc83xx_spi->lock);
+ mpc83xx_spi->busy = 1;
+ while (!list_empty(&mpc83xx_spi->queue)) {
+ struct spi_message *m;
+ struct spi_device *spi;
+ struct spi_transfer *t = NULL;
+ unsigned cs_change;
+ int status, nsecs = 50;
+
+ m = container_of(mpc83xx_spi->queue.next,
+ struct spi_message, queue);
+ list_del_init(&m->queue);
+ spin_unlock_irq(&mpc83xx_spi->lock);
+
+ spi = m->spi;
+ cs_change = 1;
+ status = 0;
+ list_for_each_entry(t, &m->transfers, transfer_list) {
+ if (t->bits_per_word || t->speed_hz) {
+ /* Don't allow changes if CS is active */
+ status = -EINVAL;
+
+ if (cs_change)
+ status = mpc83xx_spi_setup_transfer(spi, t);
+ if (status < 0)
+ break;
+ }
+
+ if (cs_change)
+ mpc83xx_spi_chipselect(spi, BITBANG_CS_ACTIVE);
+ cs_change = t->cs_change;
+ if (t->len)
+ status = mpc83xx_spi_bufs(spi, t);
+ if (status) {
+ status = -EMSGSIZE;
+ break;
+ }
+ m->actual_length += t->len;
+
+ if (t->delay_usecs)
+ udelay(t->delay_usecs);
+
+ if (cs_change) {
+ ndelay(nsecs);
+ mpc83xx_spi_chipselect(spi, BITBANG_CS_INACTIVE);
+ ndelay(nsecs);
+ }
+ }
+
+ m->status = status;
+ m->complete(m->context);
+
+ if (status || !cs_change) {
+ ndelay(nsecs);
+ mpc83xx_spi_chipselect(spi, BITBANG_CS_INACTIVE);
+ }
+
+ mpc83xx_spi_setup_transfer(spi, NULL);
+
+ spin_lock_irq(&mpc83xx_spi->lock);
+ }
+ mpc83xx_spi->busy = 0;
+ spin_unlock_irq(&mpc83xx_spi->lock);
+}
+
+/* the spi->mode bits understood by this driver: */
+#define MODEBITS (SPI_CPOL | SPI_CPHA | SPI_CS_HIGH \
+ | SPI_LSB_FIRST | SPI_LOOP)
+
+static int mpc83xx_spi_setup(struct spi_device *spi)
+{
+ struct mpc83xx_spi *mpc83xx_spi;
+ int retval;
+ u32 hw_mode;
+ struct spi_mpc83xx_cs *cs = spi->controller_state;
+
+ if (spi->mode & ~MODEBITS) {
+ dev_dbg(&spi->dev, "setup: unsupported mode bits %x\n",
+ spi->mode & ~MODEBITS);
+ return -EINVAL;
+ }
+
+ if (!spi->max_speed_hz)
+ return -EINVAL;
+
+ if (!cs) {
+ cs = kzalloc(sizeof *cs, GFP_KERNEL);
+ if (!cs)
+ return -ENOMEM;
+ spi->controller_state = cs;
+ }
+ mpc83xx_spi = spi_master_get_devdata(spi->master);
+
+ if (!spi->bits_per_word)
+ spi->bits_per_word = 8;
+
+ hw_mode = cs->hw_mode; /* Save orginal settings */
+ cs->hw_mode = mpc83xx_spi_read_reg(&mpc83xx_spi->base->mode);
+ /* mask out bits we are going to set */
+ cs->hw_mode &= ~(SPMODE_CP_BEGIN_EDGECLK | SPMODE_CI_INACTIVEHIGH
+ | SPMODE_REV | SPMODE_LOOP);
+
+ if (spi->mode & SPI_CPHA)
+ cs->hw_mode |= SPMODE_CP_BEGIN_EDGECLK;
+ if (spi->mode & SPI_CPOL)
+ cs->hw_mode |= SPMODE_CI_INACTIVEHIGH;
+ if (!(spi->mode & SPI_LSB_FIRST))
+ cs->hw_mode |= SPMODE_REV;
+ if (spi->mode & SPI_LOOP)
+ cs->hw_mode |= SPMODE_LOOP;
+
+ retval = mpc83xx_spi_setup_transfer(spi, NULL);
+ if (retval < 0) {
+ cs->hw_mode = hw_mode; /* Restore settings */
+ return retval;
+ }
+
+ dev_dbg(&spi->dev, "%s, mode %d, %u bits/w, %u Hz\n",
+ __func__, spi->mode & (SPI_CPOL | SPI_CPHA),
+ spi->bits_per_word, spi->max_speed_hz);
+#if 0 /* Don't think this is needed */
+ /* NOTE we _need_ to call chipselect() early, ideally with adapter
+ * setup, unless the hardware defaults cooperate to avoid confusion
+ * between normal (active low) and inverted chipselects.
+ */
+
+ /* deselect chip (low or high) */
+ spin_lock(&mpc83xx_spi->lock);
+ if (!mpc83xx_spi->busy)
+ mpc83xx_spi_chipselect(spi, BITBANG_CS_INACTIVE);
+ spin_unlock(&mpc83xx_spi->lock);
+#endif
+ return 0;
}
irqreturn_t mpc83xx_spi_irq(s32 irq, void *context_data)
@@ -395,6 +513,28 @@
return ret;
}
+static int mpc83xx_spi_transfer(struct spi_device *spi,
+ struct spi_message *m)
+{
+ struct mpc83xx_spi *mpc83xx_spi = spi_master_get_devdata(spi->master);
+ unsigned long flags;
+
+ m->actual_length = 0;
+ m->status = -EINPROGRESS;
+
+ spin_lock_irqsave(&mpc83xx_spi->lock, flags);
+ list_add_tail(&m->queue, &mpc83xx_spi->queue);
+ queue_work(mpc83xx_spi->workqueue, &mpc83xx_spi->work);
+ spin_unlock_irqrestore(&mpc83xx_spi->lock, flags);
+
+ return 0;
+}
+
+
+static void mpc83xx_spi_cleanup(struct spi_device *spi)
+{
+ kfree(spi->controller_state);
+}
static int __init mpc83xx_spi_probe(struct platform_device *dev)
{
@@ -426,11 +566,11 @@
ret = -ENODEV;
goto free_master;
}
+ master->setup = mpc83xx_spi_setup;
+ master->transfer = mpc83xx_spi_transfer;
+ master->cleanup = mpc83xx_spi_cleanup;
+
mpc83xx_spi = spi_master_get_devdata(master);
- mpc83xx_spi->bitbang.master = spi_master_get(master);
- mpc83xx_spi->bitbang.chipselect = mpc83xx_spi_chipselect;
- mpc83xx_spi->bitbang.setup_transfer = mpc83xx_spi_setup_transfer;
- mpc83xx_spi->bitbang.txrx_bufs = mpc83xx_spi_bufs;
mpc83xx_spi->activate_cs = pdata->activate_cs;
mpc83xx_spi->deactivate_cs = pdata->deactivate_cs;
mpc83xx_spi->qe_mode = pdata->qe_mode;
@@ -445,7 +585,6 @@
mpc83xx_spi->tx_shift = 24;
}
- mpc83xx_spi->bitbang.master->setup = mpc83xx_spi_setup;
init_completion(&mpc83xx_spi->done);
mpc83xx_spi->base = ioremap(r->start, r->end - r->start + 1);
@@ -483,11 +622,21 @@
regval |= SPMODE_OP;
mpc83xx_spi_write_reg(&mpc83xx_spi->base->mode, regval);
+ spin_lock_init(&mpc83xx_spi->lock);
+ init_completion(&mpc83xx_spi->done);
+ INIT_WORK(&mpc83xx_spi->work, mpc83xx_spi_work);
+ INIT_LIST_HEAD(&mpc83xx_spi->queue);
- ret = spi_bitbang_start(&mpc83xx_spi->bitbang);
-
- if (ret != 0)
+ mpc83xx_spi->workqueue = create_singlethread_workqueue(
+ master->dev.parent->bus_id);
+ if (mpc83xx_spi->workqueue == NULL) {
+ ret = -EBUSY;
goto free_irq;
+ }
+
+ ret = spi_register_master(master);
+ if (ret < 0)
+ goto unreg_master;
printk(KERN_INFO
"%s: MPC83xx SPI Controller driver at 0x%p (irq = %d)\n",
@@ -495,6 +644,8 @@
return ret;
+unreg_master:
+ destroy_workqueue(mpc83xx_spi->workqueue);
free_irq:
free_irq(mpc83xx_spi->irq, mpc83xx_spi);
unmap_io:
@@ -515,10 +666,12 @@
master = platform_get_drvdata(dev);
mpc83xx_spi = spi_master_get_devdata(master);
- spi_bitbang_stop(&mpc83xx_spi->bitbang);
+ flush_workqueue(mpc83xx_spi->workqueue);
+ destroy_workqueue(mpc83xx_spi->workqueue);
+ spi_unregister_master(master);
+
free_irq(mpc83xx_spi->irq, mpc83xx_spi);
iounmap(mpc83xx_spi->base);
- spi_master_put(mpc83xx_spi->bitbang.master);
return 0;
}
diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c
index b3518ca..799337f 100644
--- a/drivers/spi/spidev.c
+++ b/drivers/spi/spidev.c
@@ -25,6 +25,7 @@
#include <linux/ioctl.h>
#include <linux/fs.h>
#include <linux/device.h>
+#include <linux/err.h>
#include <linux/list.h>
#include <linux/errno.h>
#include <linux/mutex.h>
@@ -67,10 +68,12 @@
| SPI_LSB_FIRST | SPI_3WIRE | SPI_LOOP)
struct spidev_data {
- struct device dev;
+ dev_t devt;
+ spinlock_t spi_lock;
struct spi_device *spi;
struct list_head device_entry;
+ /* buffer is NULL unless this device is open (users > 0) */
struct mutex buf_lock;
unsigned users;
u8 *buffer;
@@ -85,12 +88,75 @@
/*-------------------------------------------------------------------------*/
+/*
+ * We can't use the standard synchronous wrappers for file I/O; we
+ * need to protect against async removal of the underlying spi_device.
+ */
+static void spidev_complete(void *arg)
+{
+ complete(arg);
+}
+
+static ssize_t
+spidev_sync(struct spidev_data *spidev, struct spi_message *message)
+{
+ DECLARE_COMPLETION_ONSTACK(done);
+ int status;
+
+ message->complete = spidev_complete;
+ message->context = &done;
+
+ spin_lock_irq(&spidev->spi_lock);
+ if (spidev->spi == NULL)
+ status = -ESHUTDOWN;
+ else
+ status = spi_async(spidev->spi, message);
+ spin_unlock_irq(&spidev->spi_lock);
+
+ if (status == 0) {
+ wait_for_completion(&done);
+ status = message->status;
+ if (status == 0)
+ status = message->actual_length;
+ }
+ return status;
+}
+
+static inline ssize_t
+spidev_sync_write(struct spidev_data *spidev, size_t len)
+{
+ struct spi_transfer t = {
+ .tx_buf = spidev->buffer,
+ .len = len,
+ };
+ struct spi_message m;
+
+ spi_message_init(&m);
+ spi_message_add_tail(&t, &m);
+ return spidev_sync(spidev, &m);
+}
+
+static inline ssize_t
+spidev_sync_read(struct spidev_data *spidev, size_t len)
+{
+ struct spi_transfer t = {
+ .rx_buf = spidev->buffer,
+ .len = len,
+ };
+ struct spi_message m;
+
+ spi_message_init(&m);
+ spi_message_add_tail(&t, &m);
+ return spidev_sync(spidev, &m);
+}
+
+/*-------------------------------------------------------------------------*/
+
/* Read-only message with current device setup */
static ssize_t
spidev_read(struct file *filp, char __user *buf, size_t count, loff_t *f_pos)
{
struct spidev_data *spidev;
- struct spi_device *spi;
ssize_t status = 0;
/* chipselect only toggles at start or end of operation */
@@ -98,10 +164,9 @@
return -EMSGSIZE;
spidev = filp->private_data;
- spi = spidev->spi;
mutex_lock(&spidev->buf_lock);
- status = spi_read(spi, spidev->buffer, count);
+ status = spidev_sync_read(spidev, count);
if (status == 0) {
unsigned long missing;
@@ -122,7 +187,6 @@
size_t count, loff_t *f_pos)
{
struct spidev_data *spidev;
- struct spi_device *spi;
ssize_t status = 0;
unsigned long missing;
@@ -131,12 +195,11 @@
return -EMSGSIZE;
spidev = filp->private_data;
- spi = spidev->spi;
mutex_lock(&spidev->buf_lock);
missing = copy_from_user(spidev->buffer, buf, count);
if (missing == 0) {
- status = spi_write(spi, spidev->buffer, count);
+ status = spidev_sync_write(spidev, count);
if (status == 0)
status = count;
} else
@@ -153,7 +216,6 @@
struct spi_transfer *k_xfers;
struct spi_transfer *k_tmp;
struct spi_ioc_transfer *u_tmp;
- struct spi_device *spi = spidev->spi;
unsigned n, total;
u8 *buf;
int status = -EFAULT;
@@ -215,7 +277,7 @@
spi_message_add_tail(k_tmp, &msg);
}
- status = spi_sync(spi, &msg);
+ status = spidev_sync(spidev, &msg);
if (status < 0)
goto done;
@@ -269,8 +331,16 @@
if (err)
return -EFAULT;
+ /* guard against device removal before, or while,
+ * we issue this ioctl.
+ */
spidev = filp->private_data;
- spi = spidev->spi;
+ spin_lock_irq(&spidev->spi_lock);
+ spi = spi_dev_get(spidev->spi);
+ spin_unlock_irq(&spidev->spi_lock);
+
+ if (spi == NULL)
+ return -ESHUTDOWN;
switch (cmd) {
/* read requests */
@@ -356,8 +426,10 @@
default:
/* segmented and/or full-duplex I/O request */
if (_IOC_NR(cmd) != _IOC_NR(SPI_IOC_MESSAGE(0))
- || _IOC_DIR(cmd) != _IOC_WRITE)
- return -ENOTTY;
+ || _IOC_DIR(cmd) != _IOC_WRITE) {
+ retval = -ENOTTY;
+ break;
+ }
tmp = _IOC_SIZE(cmd);
if ((tmp % sizeof(struct spi_ioc_transfer)) != 0) {
@@ -385,6 +457,7 @@
kfree(ioc);
break;
}
+ spi_dev_put(spi);
return retval;
}
@@ -396,7 +469,7 @@
mutex_lock(&device_list_lock);
list_for_each_entry(spidev, &device_list, device_entry) {
- if (spidev->dev.devt == inode->i_rdev) {
+ if (spidev->devt == inode->i_rdev) {
status = 0;
break;
}
@@ -429,10 +502,22 @@
mutex_lock(&device_list_lock);
spidev = filp->private_data;
filp->private_data = NULL;
+
+ /* last close? */
spidev->users--;
if (!spidev->users) {
+ int dofree;
+
kfree(spidev->buffer);
spidev->buffer = NULL;
+
+ /* ... after we unbound from the underlying device? */
+ spin_lock_irq(&spidev->spi_lock);
+ dofree = (spidev->spi == NULL);
+ spin_unlock_irq(&spidev->spi_lock);
+
+ if (dofree)
+ kfree(spidev);
}
mutex_unlock(&device_list_lock);
@@ -459,19 +544,7 @@
* It also simplifies memory management.
*/
-static void spidev_classdev_release(struct device *dev)
-{
- struct spidev_data *spidev;
-
- spidev = container_of(dev, struct spidev_data, dev);
- kfree(spidev);
-}
-
-static struct class spidev_class = {
- .name = "spidev",
- .owner = THIS_MODULE,
- .dev_release = spidev_classdev_release,
-};
+static struct class *spidev_class;
/*-------------------------------------------------------------------------*/
@@ -488,6 +561,7 @@
/* Initialize the driver data */
spidev->spi = spi;
+ spin_lock_init(&spidev->spi_lock);
mutex_init(&spidev->buf_lock);
INIT_LIST_HEAD(&spidev->device_entry);
@@ -498,20 +572,20 @@
mutex_lock(&device_list_lock);
minor = find_first_zero_bit(minors, N_SPI_MINORS);
if (minor < N_SPI_MINORS) {
- spidev->dev.parent = &spi->dev;
- spidev->dev.class = &spidev_class;
- spidev->dev.devt = MKDEV(SPIDEV_MAJOR, minor);
- snprintf(spidev->dev.bus_id, sizeof spidev->dev.bus_id,
+ struct device *dev;
+
+ spidev->devt = MKDEV(SPIDEV_MAJOR, minor);
+ dev = device_create(spidev_class, &spi->dev, spidev->devt,
"spidev%d.%d",
spi->master->bus_num, spi->chip_select);
- status = device_register(&spidev->dev);
+ status = IS_ERR(dev) ? PTR_ERR(dev) : 0;
} else {
dev_dbg(&spi->dev, "no minor number available!\n");
status = -ENODEV;
}
if (status == 0) {
set_bit(minor, minors);
- dev_set_drvdata(&spi->dev, spidev);
+ spi_set_drvdata(spi, spidev);
list_add(&spidev->device_entry, &device_list);
}
mutex_unlock(&device_list_lock);
@@ -524,15 +598,21 @@
static int spidev_remove(struct spi_device *spi)
{
- struct spidev_data *spidev = dev_get_drvdata(&spi->dev);
+ struct spidev_data *spidev = spi_get_drvdata(spi);
+ /* make sure ops on existing fds can abort cleanly */
+ spin_lock_irq(&spidev->spi_lock);
+ spidev->spi = NULL;
+ spi_set_drvdata(spi, NULL);
+ spin_unlock_irq(&spidev->spi_lock);
+
+ /* prevent new opens */
mutex_lock(&device_list_lock);
-
list_del(&spidev->device_entry);
- dev_set_drvdata(&spi->dev, NULL);
- clear_bit(MINOR(spidev->dev.devt), minors);
- device_unregister(&spidev->dev);
-
+ device_destroy(spidev_class, spidev->devt);
+ clear_bit(MINOR(spidev->devt), minors);
+ if (spidev->users == 0)
+ kfree(spidev);
mutex_unlock(&device_list_lock);
return 0;
@@ -568,15 +648,15 @@
if (status < 0)
return status;
- status = class_register(&spidev_class);
- if (status < 0) {
+ spidev_class = class_create(THIS_MODULE, "spidev");
+ if (IS_ERR(spidev_class)) {
unregister_chrdev(SPIDEV_MAJOR, spidev_spi.driver.name);
- return status;
+ return PTR_ERR(spidev_class);
}
status = spi_register_driver(&spidev_spi);
if (status < 0) {
- class_unregister(&spidev_class);
+ class_destroy(spidev_class);
unregister_chrdev(SPIDEV_MAJOR, spidev_spi.driver.name);
}
return status;
@@ -586,7 +666,7 @@
static void __exit spidev_exit(void)
{
spi_unregister_driver(&spidev_spi);
- class_unregister(&spidev_class);
+ class_destroy(spidev_class);
unregister_chrdev(SPIDEV_MAJOR, spidev_spi.driver.name);
}
module_exit(spidev_exit);
diff --git a/drivers/ssb/driver_pcicore.c b/drivers/ssb/driver_pcicore.c
index 75def13..d28c538 100644
--- a/drivers/ssb/driver_pcicore.c
+++ b/drivers/ssb/driver_pcicore.c
@@ -537,12 +537,12 @@
int err = 0;
u32 tmp;
- might_sleep();
-
if (!pdev)
goto out;
bus = pdev->bus;
+ might_sleep_if(pdev->id.coreid != SSB_DEV_PCI);
+
/* Enable interrupts for this device. */
if (bus->host_pci &&
((pdev->id.revision >= 6) || (pdev->id.coreid == SSB_DEV_PCIE))) {
diff --git a/drivers/uio/uio.c b/drivers/uio/uio.c
index 55cc7b8..0a12e90 100644
--- a/drivers/uio/uio.c
+++ b/drivers/uio/uio.c
@@ -649,15 +649,14 @@
if (ret)
goto err_get_minor;
- idev->dev = device_create(uio_class->class, parent,
- MKDEV(uio_major, idev->minor),
- "uio%d", idev->minor);
+ idev->dev = device_create_drvdata(uio_class->class, parent,
+ MKDEV(uio_major, idev->minor), idev,
+ "uio%d", idev->minor);
if (IS_ERR(idev->dev)) {
printk(KERN_ERR "UIO: device register failed\n");
ret = PTR_ERR(idev->dev);
goto err_device_create;
}
- dev_set_drvdata(idev->dev, idev);
ret = uio_dev_add_attributes(idev);
if (ret)
diff --git a/drivers/usb/c67x00/c67x00-ll-hpi.c b/drivers/usb/c67x00/c67x00-ll-hpi.c
index f3430b3..a9636f4 100644
--- a/drivers/usb/c67x00/c67x00-ll-hpi.c
+++ b/drivers/usb/c67x00/c67x00-ll-hpi.c
@@ -23,6 +23,7 @@
#include <asm/byteorder.h>
#include <linux/io.h>
+#include <linux/jiffies.h>
#include <linux/usb/c67x00.h>
#include "c67x00.h"
@@ -119,7 +120,7 @@
* Only data is little endian, addr has cpu endianess
*/
static void hpi_write_words_le16(struct c67x00_device *dev, u16 addr,
- u16 *data, u16 count)
+ __le16 *data, u16 count)
{
unsigned long flags;
int i;
@@ -128,7 +129,7 @@
hpi_write_reg(dev, HPI_ADDR, addr);
for (i = 0; i < count; i++)
- hpi_write_reg(dev, HPI_DATA, cpu_to_le16(*data++));
+ hpi_write_reg(dev, HPI_DATA, le16_to_cpu(*data++));
spin_unlock_irqrestore(&dev->hpi.lock, flags);
}
@@ -137,7 +138,7 @@
* Only data is little endian, addr has cpu endianess
*/
static void hpi_read_words_le16(struct c67x00_device *dev, u16 addr,
- u16 *data, u16 count)
+ __le16 *data, u16 count)
{
unsigned long flags;
int i;
@@ -145,7 +146,7 @@
spin_lock_irqsave(&dev->hpi.lock, flags);
hpi_write_reg(dev, HPI_ADDR, addr);
for (i = 0; i < count; i++)
- *data++ = le16_to_cpu(hpi_read_reg(dev, HPI_DATA));
+ *data++ = cpu_to_le16(hpi_read_reg(dev, HPI_DATA));
spin_unlock_irqrestore(&dev->hpi.lock, flags);
}
@@ -424,7 +425,7 @@
len--;
}
- hpi_write_words_le16(dev, addr, (u16 *)buf, len / 2);
+ hpi_write_words_le16(dev, addr, (__le16 *)buf, len / 2);
buf += len & ~0x01;
addr += len & ~0x01;
len &= 0x01;
@@ -455,7 +456,7 @@
len--;
}
- hpi_read_words_le16(dev, addr, (u16 *)buf, len / 2);
+ hpi_read_words_le16(dev, addr, (__le16 *)buf, len / 2);
buf += len & ~0x01;
addr += len & ~0x01;
len &= 0x01;
diff --git a/drivers/usb/class/Kconfig b/drivers/usb/class/Kconfig
index 3a9102d..66f17ed 100644
--- a/drivers/usb/class/Kconfig
+++ b/drivers/usb/class/Kconfig
@@ -29,3 +29,14 @@
To compile this driver as a module, choose M here: the
module will be called usblp.
+config USB_WDM
+ tristate "USB Wireless Device Management support"
+ depends on USB
+ ---help---
+ This driver supports the WMC Device Management functionality
+ of cell phones compliant to the CDC WMC specification. You can use
+ AT commands over this device.
+
+ To compile this driver as a module, choose M here: the
+ module will be called cdc-wdm.
+
diff --git a/drivers/usb/class/Makefile b/drivers/usb/class/Makefile
index cc391e6..535d59a 100644
--- a/drivers/usb/class/Makefile
+++ b/drivers/usb/class/Makefile
@@ -5,3 +5,4 @@
obj-$(CONFIG_USB_ACM) += cdc-acm.o
obj-$(CONFIG_USB_PRINTER) += usblp.o
+obj-$(CONFIG_USB_WDM) += cdc-wdm.o
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index cefe7f2..63c3404 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -1248,6 +1248,9 @@
{ USB_DEVICE(0x22b8, 0x7000), /* Motorola Q Phone */
.driver_info = NO_UNION_NORMAL, /* has no union descriptor */
},
+ { USB_DEVICE(0x0803, 0x3095), /* Zoom Telephonics Model 3095F USB MODEM */
+ .driver_info = NO_UNION_NORMAL, /* has no union descriptor */
+ },
/* control interfaces with various AT-command sets */
{ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM,
diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c
new file mode 100644
index 0000000..731db05
--- /dev/null
+++ b/drivers/usb/class/cdc-wdm.c
@@ -0,0 +1,740 @@
+/*
+ * cdc-wdm.c
+ *
+ * This driver supports USB CDC WCM Device Management.
+ *
+ * Copyright (c) 2007-2008 Oliver Neukum
+ *
+ * Some code taken from cdc-acm.c
+ *
+ * Released under the GPLv2.
+ *
+ * Many thanks to Carl Nordbeck
+ */
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/smp_lock.h>
+#include <linux/mutex.h>
+#include <linux/uaccess.h>
+#include <linux/bitops.h>
+#include <linux/poll.h>
+#include <linux/usb.h>
+#include <linux/usb/cdc.h>
+#include <asm/byteorder.h>
+#include <asm/unaligned.h>
+
+/*
+ * Version Information
+ */
+#define DRIVER_VERSION "v0.02"
+#define DRIVER_AUTHOR "Oliver Neukum"
+
+static struct usb_device_id wdm_ids[] = {
+ {
+ .match_flags = USB_DEVICE_ID_MATCH_INT_CLASS |
+ USB_DEVICE_ID_MATCH_INT_SUBCLASS,
+ .bInterfaceClass = USB_CLASS_COMM,
+ .bInterfaceSubClass = USB_CDC_SUBCLASS_DMM
+ },
+ { }
+};
+
+#define WDM_MINOR_BASE 176
+
+
+#define WDM_IN_USE 1
+#define WDM_DISCONNECTING 2
+#define WDM_RESULT 3
+#define WDM_READ 4
+#define WDM_INT_STALL 5
+#define WDM_POLL_RUNNING 6
+
+
+#define WDM_MAX 16
+
+
+static DEFINE_MUTEX(wdm_mutex);
+
+/* --- method tables --- */
+
+struct wdm_device {
+ u8 *inbuf; /* buffer for response */
+ u8 *outbuf; /* buffer for command */
+ u8 *sbuf; /* buffer for status */
+ u8 *ubuf; /* buffer for copy to user space */
+
+ struct urb *command;
+ struct urb *response;
+ struct urb *validity;
+ struct usb_interface *intf;
+ struct usb_ctrlrequest *orq;
+ struct usb_ctrlrequest *irq;
+ spinlock_t iuspin;
+
+ unsigned long flags;
+ u16 bufsize;
+ u16 wMaxCommand;
+ u16 wMaxPacketSize;
+ u16 bMaxPacketSize0;
+ __le16 inum;
+ int reslength;
+ int length;
+ int read;
+ int count;
+ dma_addr_t shandle;
+ dma_addr_t ihandle;
+ struct mutex wlock;
+ struct mutex rlock;
+ wait_queue_head_t wait;
+ struct work_struct rxwork;
+ int werr;
+ int rerr;
+};
+
+static struct usb_driver wdm_driver;
+
+/* --- callbacks --- */
+static void wdm_out_callback(struct urb *urb)
+{
+ struct wdm_device *desc;
+ desc = urb->context;
+ spin_lock(&desc->iuspin);
+ desc->werr = urb->status;
+ spin_unlock(&desc->iuspin);
+ clear_bit(WDM_IN_USE, &desc->flags);
+ kfree(desc->outbuf);
+ wake_up(&desc->wait);
+}
+
+static void wdm_in_callback(struct urb *urb)
+{
+ struct wdm_device *desc = urb->context;
+ int status = urb->status;
+
+ spin_lock(&desc->iuspin);
+
+ if (status) {
+ switch (status) {
+ case -ENOENT:
+ dev_dbg(&desc->intf->dev,
+ "nonzero urb status received: -ENOENT");
+ break;
+ case -ECONNRESET:
+ dev_dbg(&desc->intf->dev,
+ "nonzero urb status received: -ECONNRESET");
+ break;
+ case -ESHUTDOWN:
+ dev_dbg(&desc->intf->dev,
+ "nonzero urb status received: -ESHUTDOWN");
+ break;
+ case -EPIPE:
+ err("nonzero urb status received: -EPIPE");
+ break;
+ default:
+ err("Unexpected error %d", status);
+ break;
+ }
+ }
+
+ desc->rerr = status;
+ desc->reslength = urb->actual_length;
+ memmove(desc->ubuf + desc->length, desc->inbuf, desc->reslength);
+ desc->length += desc->reslength;
+ wake_up(&desc->wait);
+
+ set_bit(WDM_READ, &desc->flags);
+ spin_unlock(&desc->iuspin);
+}
+
+static void wdm_int_callback(struct urb *urb)
+{
+ int rv = 0;
+ int status = urb->status;
+ struct wdm_device *desc;
+ struct usb_ctrlrequest *req;
+ struct usb_cdc_notification *dr;
+
+ desc = urb->context;
+ req = desc->irq;
+ dr = (struct usb_cdc_notification *)desc->sbuf;
+
+ if (status) {
+ switch (status) {
+ case -ESHUTDOWN:
+ case -ENOENT:
+ case -ECONNRESET:
+ return; /* unplug */
+ case -EPIPE:
+ set_bit(WDM_INT_STALL, &desc->flags);
+ err("Stall on int endpoint");
+ goto sw; /* halt is cleared in work */
+ default:
+ err("nonzero urb status received: %d", status);
+ break;
+ }
+ }
+
+ if (urb->actual_length < sizeof(struct usb_cdc_notification)) {
+ err("wdm_int_callback - %d bytes", urb->actual_length);
+ goto exit;
+ }
+
+ switch (dr->bNotificationType) {
+ case USB_CDC_NOTIFY_RESPONSE_AVAILABLE:
+ dev_dbg(&desc->intf->dev,
+ "NOTIFY_RESPONSE_AVAILABLE received: index %d len %d",
+ dr->wIndex, dr->wLength);
+ break;
+
+ case USB_CDC_NOTIFY_NETWORK_CONNECTION:
+
+ dev_dbg(&desc->intf->dev,
+ "NOTIFY_NETWORK_CONNECTION %s network",
+ dr->wValue ? "connected to" : "disconnected from");
+ goto exit;
+ default:
+ clear_bit(WDM_POLL_RUNNING, &desc->flags);
+ err("unknown notification %d received: index %d len %d",
+ dr->bNotificationType, dr->wIndex, dr->wLength);
+ goto exit;
+ }
+
+ req->bRequestType = (USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE);
+ req->bRequest = USB_CDC_GET_ENCAPSULATED_RESPONSE;
+ req->wValue = 0;
+ req->wIndex = desc->inum;
+ req->wLength = cpu_to_le16(desc->bMaxPacketSize0);
+
+ usb_fill_control_urb(
+ desc->response,
+ interface_to_usbdev(desc->intf),
+ /* using common endpoint 0 */
+ usb_rcvctrlpipe(interface_to_usbdev(desc->intf), 0),
+ (unsigned char *)req,
+ desc->inbuf,
+ desc->bMaxPacketSize0,
+ wdm_in_callback,
+ desc
+ );
+ desc->response->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+ spin_lock(&desc->iuspin);
+ clear_bit(WDM_READ, &desc->flags);
+ if (!test_bit(WDM_DISCONNECTING, &desc->flags)) {
+ rv = usb_submit_urb(desc->response, GFP_ATOMIC);
+ dev_dbg(&desc->intf->dev, "%s: usb_submit_urb %d",
+ __func__, rv);
+ }
+ spin_unlock(&desc->iuspin);
+ if (rv < 0) {
+ if (rv == -EPERM)
+ return;
+ if (rv == -ENOMEM) {
+sw:
+ rv = schedule_work(&desc->rxwork);
+ if (rv)
+ err("Cannot schedule work");
+ }
+ }
+exit:
+ rv = usb_submit_urb(urb, GFP_ATOMIC);
+ if (rv)
+ err("%s - usb_submit_urb failed with result %d",
+ __func__, rv);
+
+}
+
+static void kill_urbs(struct wdm_device *desc)
+{
+ usb_kill_urb(desc->command);
+ usb_kill_urb(desc->validity);
+ usb_kill_urb(desc->response);
+}
+
+static void free_urbs(struct wdm_device *desc)
+{
+ usb_free_urb(desc->validity);
+ usb_free_urb(desc->response);
+ usb_free_urb(desc->command);
+}
+
+static void cleanup(struct wdm_device *desc)
+{
+ usb_buffer_free(interface_to_usbdev(desc->intf),
+ desc->wMaxPacketSize,
+ desc->sbuf,
+ desc->validity->transfer_dma);
+ usb_buffer_free(interface_to_usbdev(desc->intf),
+ desc->wMaxPacketSize,
+ desc->inbuf,
+ desc->response->transfer_dma);
+ kfree(desc->orq);
+ kfree(desc->irq);
+ kfree(desc->ubuf);
+ free_urbs(desc);
+ kfree(desc);
+}
+
+static ssize_t wdm_write
+(struct file *file, const char __user *buffer, size_t count, loff_t *ppos)
+{
+ u8 *buf;
+ int rv = -EMSGSIZE, r, we;
+ struct wdm_device *desc = file->private_data;
+ struct usb_ctrlrequest *req;
+
+ if (count > desc->wMaxCommand)
+ count = desc->wMaxCommand;
+
+ spin_lock_irq(&desc->iuspin);
+ we = desc->werr;
+ desc->werr = 0;
+ spin_unlock_irq(&desc->iuspin);
+ if (we < 0)
+ return -EIO;
+
+ r = mutex_lock_interruptible(&desc->wlock); /* concurrent writes */
+ rv = -ERESTARTSYS;
+ if (r)
+ goto outnl;
+
+ r = wait_event_interruptible(desc->wait, !test_bit(WDM_IN_USE,
+ &desc->flags));
+ if (r < 0)
+ goto out;
+
+ if (test_bit(WDM_DISCONNECTING, &desc->flags)) {
+ rv = -ENODEV;
+ goto out;
+ }
+
+ desc->outbuf = buf = kmalloc(count, GFP_KERNEL);
+ if (!buf) {
+ rv = -ENOMEM;
+ goto out;
+ }
+
+ r = copy_from_user(buf, buffer, count);
+ if (r > 0) {
+ kfree(buf);
+ rv = -EFAULT;
+ goto out;
+ }
+
+ req = desc->orq;
+ usb_fill_control_urb(
+ desc->command,
+ interface_to_usbdev(desc->intf),
+ /* using common endpoint 0 */
+ usb_sndctrlpipe(interface_to_usbdev(desc->intf), 0),
+ (unsigned char *)req,
+ buf,
+ count,
+ wdm_out_callback,
+ desc
+ );
+
+ req->bRequestType = (USB_DIR_OUT | USB_TYPE_CLASS |
+ USB_RECIP_INTERFACE);
+ req->bRequest = USB_CDC_SEND_ENCAPSULATED_COMMAND;
+ req->wValue = 0;
+ req->wIndex = desc->inum;
+ req->wLength = cpu_to_le16(count);
+ set_bit(WDM_IN_USE, &desc->flags);
+
+ rv = usb_submit_urb(desc->command, GFP_KERNEL);
+ if (rv < 0) {
+ kfree(buf);
+ clear_bit(WDM_IN_USE, &desc->flags);
+ } else {
+ dev_dbg(&desc->intf->dev, "Tx URB has been submitted index=%d",
+ req->wIndex);
+ }
+out:
+ mutex_unlock(&desc->wlock);
+outnl:
+ return rv < 0 ? rv : count;
+}
+
+static ssize_t wdm_read
+(struct file *file, char __user *buffer, size_t count, loff_t *ppos)
+{
+ int rv, cntr;
+ int i = 0;
+ struct wdm_device *desc = file->private_data;
+
+
+ rv = mutex_lock_interruptible(&desc->rlock); /*concurrent reads */
+ if (rv < 0)
+ return -ERESTARTSYS;
+
+ if (desc->length == 0) {
+ desc->read = 0;
+retry:
+ i++;
+ rv = wait_event_interruptible(desc->wait,
+ test_bit(WDM_READ, &desc->flags));
+
+ if (rv < 0) {
+ rv = -ERESTARTSYS;
+ goto err;
+ }
+
+ spin_lock_irq(&desc->iuspin);
+
+ if (desc->rerr) { /* read completed, error happened */
+ int t = desc->rerr;
+ desc->rerr = 0;
+ spin_unlock_irq(&desc->iuspin);
+ err("reading had resulted in %d", t);
+ rv = -EIO;
+ goto err;
+ }
+ /*
+ * recheck whether we've lost the race
+ * against the completion handler
+ */
+ if (!test_bit(WDM_READ, &desc->flags)) { /* lost race */
+ spin_unlock_irq(&desc->iuspin);
+ goto retry;
+ }
+ if (!desc->reslength) { /* zero length read */
+ spin_unlock_irq(&desc->iuspin);
+ goto retry;
+ }
+ clear_bit(WDM_READ, &desc->flags);
+ spin_unlock_irq(&desc->iuspin);
+ }
+
+ cntr = count > desc->length ? desc->length : count;
+ rv = copy_to_user(buffer, desc->ubuf, cntr);
+ if (rv > 0) {
+ rv = -EFAULT;
+ goto err;
+ }
+
+ for (i = 0; i < desc->length - cntr; i++)
+ desc->ubuf[i] = desc->ubuf[i + cntr];
+
+ desc->length -= cntr;
+ rv = cntr;
+
+err:
+ mutex_unlock(&desc->rlock);
+ if (rv < 0)
+ err("wdm_read: exit error");
+ return rv;
+}
+
+static int wdm_flush(struct file *file, fl_owner_t id)
+{
+ struct wdm_device *desc = file->private_data;
+
+ wait_event(desc->wait, !test_bit(WDM_IN_USE, &desc->flags));
+ if (desc->werr < 0)
+ err("Error in flush path: %d", desc->werr);
+
+ return desc->werr;
+}
+
+static unsigned int wdm_poll(struct file *file, struct poll_table_struct *wait)
+{
+ struct wdm_device *desc = file->private_data;
+ unsigned long flags;
+ unsigned int mask = 0;
+
+ spin_lock_irqsave(&desc->iuspin, flags);
+ if (test_bit(WDM_DISCONNECTING, &desc->flags)) {
+ mask = POLLERR;
+ spin_unlock_irqrestore(&desc->iuspin, flags);
+ goto desc_out;
+ }
+ if (test_bit(WDM_READ, &desc->flags))
+ mask = POLLIN | POLLRDNORM;
+ if (desc->rerr || desc->werr)
+ mask |= POLLERR;
+ if (!test_bit(WDM_IN_USE, &desc->flags))
+ mask |= POLLOUT | POLLWRNORM;
+ spin_unlock_irqrestore(&desc->iuspin, flags);
+
+ poll_wait(file, &desc->wait, wait);
+
+desc_out:
+ return mask;
+}
+
+static int wdm_open(struct inode *inode, struct file *file)
+{
+ int minor = iminor(inode);
+ int rv = -ENODEV;
+ struct usb_interface *intf;
+ struct wdm_device *desc;
+
+ mutex_lock(&wdm_mutex);
+ intf = usb_find_interface(&wdm_driver, minor);
+ if (!intf)
+ goto out;
+
+ desc = usb_get_intfdata(intf);
+ if (test_bit(WDM_DISCONNECTING, &desc->flags))
+ goto out;
+
+ desc->count++;
+ file->private_data = desc;
+
+ rv = usb_submit_urb(desc->validity, GFP_KERNEL);
+
+ if (rv < 0) {
+ desc->count--;
+ err("Error submitting int urb - %d", rv);
+ goto out;
+ }
+ rv = 0;
+
+out:
+ mutex_unlock(&wdm_mutex);
+ return rv;
+}
+
+static int wdm_release(struct inode *inode, struct file *file)
+{
+ struct wdm_device *desc = file->private_data;
+
+ mutex_lock(&wdm_mutex);
+ desc->count--;
+ if (!desc->count) {
+ dev_dbg(&desc->intf->dev, "wdm_release: cleanup");
+ kill_urbs(desc);
+ }
+ mutex_unlock(&wdm_mutex);
+ return 0;
+}
+
+static const struct file_operations wdm_fops = {
+ .owner = THIS_MODULE,
+ .read = wdm_read,
+ .write = wdm_write,
+ .open = wdm_open,
+ .flush = wdm_flush,
+ .release = wdm_release,
+ .poll = wdm_poll
+};
+
+static struct usb_class_driver wdm_class = {
+ .name = "cdc-wdm%d",
+ .fops = &wdm_fops,
+ .minor_base = WDM_MINOR_BASE,
+};
+
+/* --- error handling --- */
+static void wdm_rxwork(struct work_struct *work)
+{
+ struct wdm_device *desc = container_of(work, struct wdm_device, rxwork);
+ unsigned long flags;
+ int rv;
+
+ spin_lock_irqsave(&desc->iuspin, flags);
+ if (test_bit(WDM_DISCONNECTING, &desc->flags)) {
+ spin_unlock_irqrestore(&desc->iuspin, flags);
+ } else {
+ spin_unlock_irqrestore(&desc->iuspin, flags);
+ rv = usb_submit_urb(desc->response, GFP_KERNEL);
+ if (rv < 0 && rv != -EPERM) {
+ spin_lock_irqsave(&desc->iuspin, flags);
+ if (!test_bit(WDM_DISCONNECTING, &desc->flags))
+ schedule_work(&desc->rxwork);
+ spin_unlock_irqrestore(&desc->iuspin, flags);
+ }
+ }
+}
+
+/* --- hotplug --- */
+
+static int wdm_probe(struct usb_interface *intf, const struct usb_device_id *id)
+{
+ int rv = -EINVAL;
+ struct usb_device *udev = interface_to_usbdev(intf);
+ struct wdm_device *desc;
+ struct usb_host_interface *iface;
+ struct usb_endpoint_descriptor *ep;
+ struct usb_cdc_dmm_desc *dmhd;
+ u8 *buffer = intf->altsetting->extra;
+ int buflen = intf->altsetting->extralen;
+ u16 maxcom = 0;
+
+ if (!buffer)
+ goto out;
+
+ while (buflen > 0) {
+ if (buffer [1] != USB_DT_CS_INTERFACE) {
+ err("skipping garbage");
+ goto next_desc;
+ }
+
+ switch (buffer [2]) {
+ case USB_CDC_HEADER_TYPE:
+ break;
+ case USB_CDC_DMM_TYPE:
+ dmhd = (struct usb_cdc_dmm_desc *)buffer;
+ maxcom = le16_to_cpu(dmhd->wMaxCommand);
+ dev_dbg(&intf->dev,
+ "Finding maximum buffer length: %d", maxcom);
+ break;
+ default:
+ err("Ignoring extra header, type %d, length %d",
+ buffer[2], buffer[0]);
+ break;
+ }
+next_desc:
+ buflen -= buffer[0];
+ buffer += buffer[0];
+ }
+
+ rv = -ENOMEM;
+ desc = kzalloc(sizeof(struct wdm_device), GFP_KERNEL);
+ if (!desc)
+ goto out;
+ mutex_init(&desc->wlock);
+ mutex_init(&desc->rlock);
+ spin_lock_init(&desc->iuspin);
+ init_waitqueue_head(&desc->wait);
+ desc->wMaxCommand = maxcom;
+ desc->inum = cpu_to_le16((u16)intf->cur_altsetting->desc.bInterfaceNumber);
+ desc->intf = intf;
+ INIT_WORK(&desc->rxwork, wdm_rxwork);
+
+ iface = &intf->altsetting[0];
+ ep = &iface->endpoint[0].desc;
+ if (!usb_endpoint_is_int_in(ep)) {
+ rv = -EINVAL;
+ goto err;
+ }
+
+ desc->wMaxPacketSize = le16_to_cpu(ep->wMaxPacketSize);
+ desc->bMaxPacketSize0 = udev->descriptor.bMaxPacketSize0;
+
+ desc->orq = kmalloc(sizeof(struct usb_ctrlrequest), GFP_KERNEL);
+ if (!desc->orq)
+ goto err;
+ desc->irq = kmalloc(sizeof(struct usb_ctrlrequest), GFP_KERNEL);
+ if (!desc->irq)
+ goto err;
+
+ desc->validity = usb_alloc_urb(0, GFP_KERNEL);
+ if (!desc->validity)
+ goto err;
+
+ desc->response = usb_alloc_urb(0, GFP_KERNEL);
+ if (!desc->response)
+ goto err;
+
+ desc->command = usb_alloc_urb(0, GFP_KERNEL);
+ if (!desc->command)
+ goto err;
+
+ desc->ubuf = kmalloc(desc->wMaxCommand, GFP_KERNEL);
+ if (!desc->ubuf)
+ goto err;
+
+ desc->sbuf = usb_buffer_alloc(interface_to_usbdev(intf),
+ desc->wMaxPacketSize,
+ GFP_KERNEL,
+ &desc->validity->transfer_dma);
+ if (!desc->sbuf)
+ goto err;
+
+ desc->inbuf = usb_buffer_alloc(interface_to_usbdev(intf),
+ desc->bMaxPacketSize0,
+ GFP_KERNEL,
+ &desc->response->transfer_dma);
+ if (!desc->inbuf)
+ goto err2;
+
+ usb_fill_int_urb(
+ desc->validity,
+ interface_to_usbdev(intf),
+ usb_rcvintpipe(interface_to_usbdev(intf), ep->bEndpointAddress),
+ desc->sbuf,
+ desc->wMaxPacketSize,
+ wdm_int_callback,
+ desc,
+ ep->bInterval
+ );
+ desc->validity->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+ usb_set_intfdata(intf, desc);
+ rv = usb_register_dev(intf, &wdm_class);
+ dev_info(&intf->dev, "cdc-wdm%d: USB WDM device\n",
+ intf->minor - WDM_MINOR_BASE);
+ if (rv < 0)
+ goto err;
+out:
+ return rv;
+err2:
+ usb_buffer_free(interface_to_usbdev(desc->intf),
+ desc->wMaxPacketSize,
+ desc->sbuf,
+ desc->validity->transfer_dma);
+err:
+ free_urbs(desc);
+ kfree(desc->ubuf);
+ kfree(desc->orq);
+ kfree(desc->irq);
+ kfree(desc);
+ return rv;
+}
+
+static void wdm_disconnect(struct usb_interface *intf)
+{
+ struct wdm_device *desc;
+ unsigned long flags;
+
+ usb_deregister_dev(intf, &wdm_class);
+ mutex_lock(&wdm_mutex);
+ desc = usb_get_intfdata(intf);
+
+ /* the spinlock makes sure no new urbs are generated in the callbacks */
+ spin_lock_irqsave(&desc->iuspin, flags);
+ set_bit(WDM_DISCONNECTING, &desc->flags);
+ set_bit(WDM_READ, &desc->flags);
+ clear_bit(WDM_IN_USE, &desc->flags);
+ spin_unlock_irqrestore(&desc->iuspin, flags);
+ cancel_work_sync(&desc->rxwork);
+ kill_urbs(desc);
+ wake_up_all(&desc->wait);
+ if (!desc->count)
+ cleanup(desc);
+ mutex_unlock(&wdm_mutex);
+}
+
+static struct usb_driver wdm_driver = {
+ .name = "cdc_wdm",
+ .probe = wdm_probe,
+ .disconnect = wdm_disconnect,
+ .id_table = wdm_ids,
+};
+
+/* --- low level module stuff --- */
+
+static int __init wdm_init(void)
+{
+ int rv;
+
+ rv = usb_register(&wdm_driver);
+
+ return rv;
+}
+
+static void __exit wdm_exit(void)
+{
+ usb_deregister(&wdm_driver);
+}
+
+module_init(wdm_init);
+module_exit(wdm_exit);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION("USB Abstract Control Model driver for "
+ "USB WCM Device Management");
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/core/endpoint.c b/drivers/usb/core/endpoint.c
index 99e5a68..fae55a3 100644
--- a/drivers/usb/core/endpoint.c
+++ b/drivers/usb/core/endpoint.c
@@ -156,6 +156,10 @@
static struct attribute_group ep_dev_attr_grp = {
.attrs = ep_dev_attrs,
};
+static struct attribute_group *ep_dev_groups[] = {
+ &ep_dev_attr_grp,
+ NULL
+};
static int usb_endpoint_major_init(void)
{
@@ -298,6 +302,7 @@
ep_dev->desc = &endpoint->desc;
ep_dev->udev = udev;
+ ep_dev->dev.groups = ep_dev_groups;
ep_dev->dev.devt = MKDEV(usb_endpoint_major, ep_dev->minor);
ep_dev->dev.class = ep_class->class;
ep_dev->dev.parent = parent;
@@ -309,9 +314,6 @@
retval = device_register(&ep_dev->dev);
if (retval)
goto error_chrdev;
- retval = sysfs_create_group(&ep_dev->dev.kobj, &ep_dev_attr_grp);
- if (retval)
- goto error_group;
/* create the symlink to the old-style "ep_XX" directory */
sprintf(name, "ep_%02x", endpoint->desc.bEndpointAddress);
@@ -322,8 +324,6 @@
return retval;
error_link:
- sysfs_remove_group(&ep_dev->dev.kobj, &ep_dev_attr_grp);
-error_group:
device_unregister(&ep_dev->dev);
destroy_endpoint_class();
return retval;
@@ -348,7 +348,6 @@
sprintf(name, "ep_%02x", endpoint->desc.bEndpointAddress);
sysfs_remove_link(&ep_dev->dev.parent->kobj, name);
- sysfs_remove_group(&ep_dev->dev.kobj, &ep_dev_attr_grp);
device_unregister(&ep_dev->dev);
endpoint->ep_dev = NULL;
destroy_endpoint_class();
diff --git a/drivers/usb/core/generic.c b/drivers/usb/core/generic.c
index c1cb94e..7e912f2 100644
--- a/drivers/usb/core/generic.c
+++ b/drivers/usb/core/generic.c
@@ -155,9 +155,6 @@
{
int err, c;
- /* put device-specific files into sysfs */
- usb_create_sysfs_dev_files(udev);
-
/* Choose and set the configuration. This registers the interfaces
* with the driver core and lets interface drivers bind to them.
*/
@@ -189,8 +186,6 @@
* unconfigure the device */
if (udev->actconfig)
usb_set_configuration(udev, -1);
-
- usb_remove_sysfs_dev_files(udev);
}
#ifdef CONFIG_PM
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index bf10e9c..09a53e7 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -818,12 +818,12 @@
set_bit (busnum, busmap.busmap);
bus->busnum = busnum;
- bus->dev = device_create(usb_host_class, bus->controller, MKDEV(0, 0),
- "usb_host%d", busnum);
+ bus->dev = device_create_drvdata(usb_host_class, bus->controller,
+ MKDEV(0, 0), bus,
+ "usb_host%d", busnum);
result = PTR_ERR(bus->dev);
if (IS_ERR(bus->dev))
goto error_create_class_dev;
- dev_set_drvdata(bus->dev, bus);
/* Add it to the local list of buses */
list_add (&bus->bus_list, &usb_bus_list);
diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h
index 1e4b81e..a0bf5df 100644
--- a/drivers/usb/core/hcd.h
+++ b/drivers/usb/core/hcd.h
@@ -213,6 +213,8 @@
/* force handover of high-speed port to full-speed companion */
void (*relinquish_port)(struct usb_hcd *, int);
+ /* has a port been handed over to a companion? */
+ int (*port_handed_over)(struct usb_hcd *, int);
};
extern int usb_hcd_link_urb_to_ep(struct usb_hcd *hcd, struct urb *urb);
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index eb57fcc..94789be 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -644,6 +644,48 @@
#ifdef CONFIG_PM
+/* Try to identify which devices need USB-PERSIST handling */
+static int persistent_device(struct usb_device *udev)
+{
+ int i;
+ int retval;
+ struct usb_host_config *actconfig;
+
+ /* Explicitly not marked persistent? */
+ if (!udev->persist_enabled)
+ return 0;
+
+ /* No active config? */
+ actconfig = udev->actconfig;
+ if (!actconfig)
+ return 0;
+
+ /* FIXME! We should check whether it's open here or not! */
+
+ /*
+ * Check that all the interface drivers have a
+ * 'reset_resume' entrypoint
+ */
+ retval = 0;
+ for (i = 0; i < actconfig->desc.bNumInterfaces; i++) {
+ struct usb_interface *intf;
+ struct usb_driver *driver;
+
+ intf = actconfig->interface[i];
+ if (!intf->dev.driver)
+ continue;
+ driver = to_usb_driver(intf->dev.driver);
+ if (!driver->reset_resume)
+ return 0;
+ /*
+ * We have at least one driver, and that one
+ * has a reset_resume method.
+ */
+ retval = 1;
+ }
+ return retval;
+}
+
static void hub_restart(struct usb_hub *hub, int type)
{
struct usb_device *hdev = hub->hdev;
@@ -689,8 +731,8 @@
* turn off the various status changes to prevent
* khubd from disconnecting it later.
*/
- if (udev->persist_enabled && status == 0 &&
- !(portstatus & USB_PORT_STAT_ENABLE)) {
+ if (status == 0 && !(portstatus & USB_PORT_STAT_ENABLE) &&
+ persistent_device(udev)) {
if (portchange & USB_PORT_STAT_C_ENABLE)
clear_port_feature(hub->hdev, port1,
USB_PORT_FEAT_C_ENABLE);
@@ -1326,6 +1368,12 @@
usb_unlock_device(udev);
+ /* Remove the device-specific files from sysfs. This must be
+ * done with udev unlocked, because some of the attribute
+ * routines try to acquire the device lock.
+ */
+ usb_remove_sysfs_dev_files(udev);
+
/* Unregister the device. The device driver is responsible
* for removing the device files from usbfs and sysfs and for
* de-configuring the device.
@@ -1541,6 +1589,9 @@
goto fail;
}
+ /* put device-specific files into sysfs */
+ usb_create_sysfs_dev_files(udev);
+
/* Tell the world! */
announce_device(udev);
return err;
@@ -2744,7 +2795,11 @@
if ((status == -ENOTCONN) || (status == -ENOTSUPP))
break;
}
- dev_err(hub_dev, "unable to enumerate USB device on port %d\n", port1);
+ if (hub->hdev->parent ||
+ !hcd->driver->port_handed_over ||
+ !(hcd->driver->port_handed_over)(hcd, port1))
+ dev_err(hub_dev, "unable to enumerate USB device on port %d\n",
+ port1);
done:
hub_port_disable(hub, port1, 1);
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index 3e69266..fe47d14 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -1607,6 +1607,7 @@
intf->dev.driver = NULL;
intf->dev.bus = &usb_bus_type;
intf->dev.type = &usb_if_device_type;
+ intf->dev.groups = usb_interface_groups;
intf->dev.dma_mask = dev->dev.dma_mask;
device_initialize(&intf->dev);
mark_quiesced(intf);
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index 2e20193..3da1ab4 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -47,6 +47,10 @@
/* Edirol SD-20 */
{ USB_DEVICE(0x0582, 0x0027), .driver_info = USB_QUIRK_RESET_RESUME },
+ /* Avision AV600U */
+ { USB_DEVICE(0x0638, 0x0a13), .driver_info =
+ USB_QUIRK_STRING_FETCH_255 },
+
/* M-Systems Flash Disk Pioneers */
{ USB_DEVICE(0x08ec, 0x1000), .driver_info = USB_QUIRK_RESET_RESUME },
diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c
index 5b20a60..5e1f5d5 100644
--- a/drivers/usb/core/sysfs.c
+++ b/drivers/usb/core/sysfs.c
@@ -538,6 +538,46 @@
.attrs = dev_attrs,
};
+/* When modifying this list, be sure to modify dev_string_attrs_are_visible()
+ * accordingly.
+ */
+static struct attribute *dev_string_attrs[] = {
+ &dev_attr_manufacturer.attr,
+ &dev_attr_product.attr,
+ &dev_attr_serial.attr,
+ NULL
+};
+
+static mode_t dev_string_attrs_are_visible(struct kobject *kobj,
+ struct attribute *a, int n)
+{
+ struct usb_device *udev = to_usb_device(
+ container_of(kobj, struct device, kobj));
+
+ if (a == &dev_attr_manufacturer.attr) {
+ if (udev->manufacturer == NULL)
+ return 0;
+ } else if (a == &dev_attr_product.attr) {
+ if (udev->product == NULL)
+ return 0;
+ } else if (a == &dev_attr_serial.attr) {
+ if (udev->serial == NULL)
+ return 0;
+ }
+ return a->mode;
+}
+
+static struct attribute_group dev_string_attr_grp = {
+ .attrs = dev_string_attrs,
+ .is_visible = dev_string_attrs_are_visible,
+};
+
+struct attribute_group *usb_device_groups[] = {
+ &dev_attr_grp,
+ &dev_string_attr_grp,
+ NULL
+};
+
/* Binary descriptors */
static ssize_t
@@ -548,35 +588,33 @@
container_of(kobj, struct device, kobj));
size_t nleft = count;
size_t srclen, n;
+ int cfgno;
+ void *src;
- usb_lock_device(udev);
-
- /* The binary attribute begins with the device descriptor */
- srclen = sizeof(struct usb_device_descriptor);
- if (off < srclen) {
- n = min_t(size_t, nleft, srclen - off);
- memcpy(buf, off + (char *) &udev->descriptor, n);
- nleft -= n;
- buf += n;
- off = 0;
- } else {
- off -= srclen;
- }
-
- /* Then follows the raw descriptor entry for the current
- * configuration (config plus subsidiary descriptors).
+ /* The binary attribute begins with the device descriptor.
+ * Following that are the raw descriptor entries for all the
+ * configurations (config plus subsidiary descriptors).
*/
- if (udev->actconfig) {
- int cfgno = udev->actconfig - udev->config;
-
- srclen = __le16_to_cpu(udev->actconfig->desc.wTotalLength);
+ for (cfgno = -1; cfgno < udev->descriptor.bNumConfigurations &&
+ nleft > 0; ++cfgno) {
+ if (cfgno < 0) {
+ src = &udev->descriptor;
+ srclen = sizeof(struct usb_device_descriptor);
+ } else {
+ src = udev->rawdescriptors[cfgno];
+ srclen = __le16_to_cpu(udev->config[cfgno].desc.
+ wTotalLength);
+ }
if (off < srclen) {
- n = min_t(size_t, nleft, srclen - off);
- memcpy(buf, off + udev->rawdescriptors[cfgno], n);
+ n = min(nleft, srclen - (size_t) off);
+ memcpy(buf, src + off, n);
nleft -= n;
+ buf += n;
+ off = 0;
+ } else {
+ off -= srclen;
}
}
- usb_unlock_device(udev);
return count - nleft;
}
@@ -591,10 +629,9 @@
struct device *dev = &udev->dev;
int retval;
- retval = sysfs_create_group(&dev->kobj, &dev_attr_grp);
- if (retval)
- return retval;
-
+ /* Unforunately these attributes cannot be created before
+ * the uevent is broadcast.
+ */
retval = device_create_bin_file(dev, &dev_bin_attr_descriptors);
if (retval)
goto error;
@@ -607,21 +644,6 @@
if (retval)
goto error;
- if (udev->manufacturer) {
- retval = device_create_file(dev, &dev_attr_manufacturer);
- if (retval)
- goto error;
- }
- if (udev->product) {
- retval = device_create_file(dev, &dev_attr_product);
- if (retval)
- goto error;
- }
- if (udev->serial) {
- retval = device_create_file(dev, &dev_attr_serial);
- if (retval)
- goto error;
- }
retval = usb_create_ep_files(dev, &udev->ep0, udev);
if (retval)
goto error;
@@ -636,13 +658,9 @@
struct device *dev = &udev->dev;
usb_remove_ep_files(&udev->ep0);
- device_remove_file(dev, &dev_attr_manufacturer);
- device_remove_file(dev, &dev_attr_product);
- device_remove_file(dev, &dev_attr_serial);
remove_power_attributes(dev);
remove_persist_attributes(dev);
device_remove_bin_file(dev, &dev_bin_attr_descriptors);
- sysfs_remove_group(&dev->kobj, &dev_attr_grp);
}
/* Interface Accociation Descriptor fields */
@@ -688,17 +706,15 @@
struct device_attribute *attr, char *buf)
{
struct usb_interface *intf;
- struct usb_device *udev;
- int len;
+ char *string;
intf = to_usb_interface(dev);
- udev = interface_to_usbdev(intf);
- len = snprintf(buf, 256, "%s", intf->cur_altsetting->string);
- if (len < 0)
+ string = intf->cur_altsetting->string;
+ barrier(); /* The altsetting might change! */
+
+ if (!string)
return 0;
- buf[len] = '\n';
- buf[len+1] = 0;
- return len+1;
+ return sprintf(buf, "%s\n", string);
}
static DEVICE_ATTR(interface, S_IRUGO, show_interface_string, NULL);
@@ -727,18 +743,6 @@
}
static DEVICE_ATTR(modalias, S_IRUGO, show_modalias, NULL);
-static struct attribute *intf_assoc_attrs[] = {
- &dev_attr_iad_bFirstInterface.attr,
- &dev_attr_iad_bInterfaceCount.attr,
- &dev_attr_iad_bFunctionClass.attr,
- &dev_attr_iad_bFunctionSubClass.attr,
- &dev_attr_iad_bFunctionProtocol.attr,
- NULL,
-};
-static struct attribute_group intf_assoc_attr_grp = {
- .attrs = intf_assoc_attrs,
-};
-
static struct attribute *intf_attrs[] = {
&dev_attr_bInterfaceNumber.attr,
&dev_attr_bAlternateSetting.attr,
@@ -753,6 +757,37 @@
.attrs = intf_attrs,
};
+static struct attribute *intf_assoc_attrs[] = {
+ &dev_attr_iad_bFirstInterface.attr,
+ &dev_attr_iad_bInterfaceCount.attr,
+ &dev_attr_iad_bFunctionClass.attr,
+ &dev_attr_iad_bFunctionSubClass.attr,
+ &dev_attr_iad_bFunctionProtocol.attr,
+ NULL,
+};
+
+static mode_t intf_assoc_attrs_are_visible(struct kobject *kobj,
+ struct attribute *a, int n)
+{
+ struct usb_interface *intf = to_usb_interface(
+ container_of(kobj, struct device, kobj));
+
+ if (intf->intf_assoc == NULL)
+ return 0;
+ return a->mode;
+}
+
+static struct attribute_group intf_assoc_attr_grp = {
+ .attrs = intf_assoc_attrs,
+ .is_visible = intf_assoc_attrs_are_visible,
+};
+
+struct attribute_group *usb_interface_groups[] = {
+ &intf_attr_grp,
+ &intf_assoc_attr_grp,
+ NULL
+};
+
static inline void usb_create_intf_ep_files(struct usb_interface *intf,
struct usb_device *udev)
{
@@ -777,23 +812,21 @@
int usb_create_sysfs_intf_files(struct usb_interface *intf)
{
- struct device *dev = &intf->dev;
struct usb_device *udev = interface_to_usbdev(intf);
struct usb_host_interface *alt = intf->cur_altsetting;
int retval;
if (intf->sysfs_files_created)
return 0;
- retval = sysfs_create_group(&dev->kobj, &intf_attr_grp);
- if (retval)
- return retval;
+ /* The interface string may be present in some altsettings
+ * and missing in others. Hence its attribute cannot be created
+ * before the uevent is broadcast.
+ */
if (alt->string == NULL)
alt->string = usb_cache_string(udev, alt->desc.iInterface);
if (alt->string)
- retval = device_create_file(dev, &dev_attr_interface);
- if (intf->intf_assoc)
- retval = sysfs_create_group(&dev->kobj, &intf_assoc_attr_grp);
+ retval = device_create_file(&intf->dev, &dev_attr_interface);
usb_create_intf_ep_files(intf, udev);
intf->sysfs_files_created = 1;
return 0;
@@ -807,7 +840,5 @@
return;
usb_remove_intf_ep_files(intf);
device_remove_file(dev, &dev_attr_interface);
- sysfs_remove_group(&dev->kobj, &intf_attr_grp);
- sysfs_remove_group(&intf->dev.kobj, &intf_assoc_attr_grp);
intf->sysfs_files_created = 0;
}
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index 1f0db51..3257743 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -291,6 +291,7 @@
device_initialize(&dev->dev);
dev->dev.bus = &usb_bus_type;
dev->dev.type = &usb_device_type;
+ dev->dev.groups = usb_device_groups;
dev->dev.dma_mask = bus->controller->dma_mask;
set_dev_node(&dev->dev, dev_to_node(bus->controller));
dev->state = USB_STATE_ATTACHED;
diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h
index 1bf8ccb..1a8bc21 100644
--- a/drivers/usb/core/usb.h
+++ b/drivers/usb/core/usb.h
@@ -130,6 +130,10 @@
/* for labeling diagnostics */
extern const char *usbcore_name;
+/* sysfs stuff */
+extern struct attribute_group *usb_device_groups[];
+extern struct attribute_group *usb_interface_groups[];
+
/* usbfs stuff */
extern struct mutex usbfs_mutex;
extern struct usb_driver usbfs_driver;
diff --git a/drivers/usb/gadget/amd5536udc.c b/drivers/usb/gadget/amd5536udc.c
index ce337cb..f261d2a 100644
--- a/drivers/usb/gadget/amd5536udc.c
+++ b/drivers/usb/gadget/amd5536udc.c
@@ -3251,7 +3251,7 @@
/* pci setup */
if (pci_enable_device(pdev) < 0) {
kfree(dev);
- dev = 0;
+ dev = NULL;
retval = -ENODEV;
goto finished;
}
@@ -3264,7 +3264,7 @@
if (!request_mem_region(resource, len, name)) {
dev_dbg(&pdev->dev, "pci device used already\n");
kfree(dev);
- dev = 0;
+ dev = NULL;
retval = -EBUSY;
goto finished;
}
@@ -3274,7 +3274,7 @@
if (dev->virt_addr == NULL) {
dev_dbg(&pdev->dev, "start address cannot be mapped\n");
kfree(dev);
- dev = 0;
+ dev = NULL;
retval = -EFAULT;
goto finished;
}
@@ -3282,7 +3282,7 @@
if (!pdev->irq) {
dev_err(&dev->pdev->dev, "irq not set\n");
kfree(dev);
- dev = 0;
+ dev = NULL;
retval = -ENODEV;
goto finished;
}
@@ -3290,7 +3290,7 @@
if (request_irq(pdev->irq, udc_irq, IRQF_SHARED, name, dev) != 0) {
dev_dbg(&dev->pdev->dev, "request_irq(%d) fail\n", pdev->irq);
kfree(dev);
- dev = 0;
+ dev = NULL;
retval = -EBUSY;
goto finished;
}
diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c
index e756023..07e5a0b 100644
--- a/drivers/usb/gadget/atmel_usba_udc.c
+++ b/drivers/usb/gadget/atmel_usba_udc.c
@@ -649,7 +649,13 @@
if (!ep->desc) {
spin_unlock_irqrestore(&udc->lock, flags);
- DBG(DBG_ERR, "ep_disable: %s not enabled\n", ep->ep.name);
+ /* REVISIT because this driver disables endpoints in
+ * reset_all_endpoints() before calling disconnect(),
+ * most gadget drivers would trigger this non-error ...
+ */
+ if (udc->gadget.speed != USB_SPEED_UNKNOWN)
+ DBG(DBG_ERR, "ep_disable: %s not enabled\n",
+ ep->ep.name);
return -EINVAL;
}
ep->desc = NULL;
@@ -1032,8 +1038,6 @@
.release = nop_release,
},
},
-
- .lock = SPIN_LOCK_UNLOCKED,
};
/*
@@ -1052,6 +1056,12 @@
request_complete(ep, req, -ECONNRESET);
}
+ /* NOTE: normally, the next call to the gadget driver is in
+ * charge of disabling endpoints... usually disconnect().
+ * The exception would be entering a high speed test mode.
+ *
+ * FIXME remove this code ... and retest thoroughly.
+ */
list_for_each_entry(ep, &udc->gadget.ep_list, ep.ep_list) {
if (ep->desc) {
spin_unlock(&udc->lock);
@@ -1219,7 +1229,7 @@
static int handle_ep0_setup(struct usba_udc *udc, struct usba_ep *ep,
struct usb_ctrlrequest *crq)
{
- int retval = 0;;
+ int retval = 0;
switch (crq->bRequest) {
case USB_REQ_GET_STATUS: {
@@ -1693,6 +1703,14 @@
usba_writel(udc, INT_CLR, USBA_END_OF_RESET);
reset_all_endpoints(udc);
+ if (udc->gadget.speed != USB_SPEED_UNKNOWN
+ && udc->driver->disconnect) {
+ udc->gadget.speed = USB_SPEED_UNKNOWN;
+ spin_unlock(&udc->lock);
+ udc->driver->disconnect(&udc->gadget);
+ spin_lock(&udc->lock);
+ }
+
if (status & USBA_HIGH_SPEED) {
DBG(DBG_BUS, "High-speed bus reset detected\n");
udc->gadget.speed = USB_SPEED_HIGH;
@@ -1716,9 +1734,13 @@
| USBA_DET_SUSPEND
| USBA_END_OF_RESUME));
+ /*
+ * Unclear why we hit this irregularly, e.g. in usbtest,
+ * but it's clearly harmless...
+ */
if (!(usba_ep_readl(ep0, CFG) & USBA_EPT_MAPPED))
- dev_warn(&udc->pdev->dev,
- "WARNING: EP0 configuration is invalid!\n");
+ dev_dbg(&udc->pdev->dev,
+ "ODD: EP0 configuration is invalid!\n");
}
spin_unlock(&udc->lock);
@@ -1751,9 +1773,11 @@
reset_all_endpoints(udc);
toggle_bias(0);
usba_writel(udc, CTRL, USBA_DISABLE_MASK);
- spin_unlock(&udc->lock);
- udc->driver->disconnect(&udc->gadget);
- spin_lock(&udc->lock);
+ if (udc->driver->disconnect) {
+ spin_unlock(&udc->lock);
+ udc->driver->disconnect(&udc->gadget);
+ spin_lock(&udc->lock);
+ }
}
udc->vbus_prev = vbus;
}
@@ -1825,7 +1849,7 @@
if (!udc->pdev)
return -ENODEV;
- if (driver != udc->driver)
+ if (driver != udc->driver || !driver->unbind)
return -EINVAL;
if (udc->vbus_pin != -1)
@@ -1840,6 +1864,9 @@
toggle_bias(0);
usba_writel(udc, CTRL, USBA_DISABLE_MASK);
+ if (udc->driver->disconnect)
+ udc->driver->disconnect(&udc->gadget);
+
driver->unbind(&udc->gadget);
udc->gadget.dev.driver = NULL;
udc->driver = NULL;
@@ -1879,6 +1906,7 @@
goto err_get_hclk;
}
+ spin_lock_init(&udc->lock);
udc->pdev = pdev;
udc->pclk = pclk;
udc->hclk = hclk;
diff --git a/drivers/usb/gadget/fsl_usb2_udc.c b/drivers/usb/gadget/fsl_usb2_udc.c
index 651b827..1868754 100644
--- a/drivers/usb/gadget/fsl_usb2_udc.c
+++ b/drivers/usb/gadget/fsl_usb2_udc.c
@@ -1627,7 +1627,9 @@
udc_reset_ep_queue(udc, pipe);
/* report disconnect; the driver is already quiesced */
+ spin_unlock(&udc->lock);
udc->driver->disconnect(&udc->gadget);
+ spin_lock(&udc->lock);
return 0;
}
diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c
index 75eba20..e02bfd4 100644
--- a/drivers/usb/gadget/pxa27x_udc.c
+++ b/drivers/usb/gadget/pxa27x_udc.c
@@ -1526,7 +1526,8 @@
ep0_idle(udc);
udc->gadget.speed = USB_SPEED_UNKNOWN;
- udc->mach->udc_command(PXA2XX_UDC_CMD_DISCONNECT);
+ if (udc->mach->udc_command)
+ udc->mach->udc_command(PXA2XX_UDC_CMD_DISCONNECT);
}
/**
@@ -1546,7 +1547,6 @@
INIT_LIST_HEAD(&dev->gadget.ep0->ep_list);
dev->udc_usb_ep[0].pxa_ep = &dev->pxa_ep[0];
ep0_idle(dev);
- strcpy(dev->dev->bus_id, "");
/* PXA endpoints init */
for (i = 0; i < NR_PXA_ENDPOINTS; i++) {
@@ -1746,13 +1746,10 @@
ep_err(ep, "wrong to have extra bytes for setup : 0x%08x\n", i);
}
- le16_to_cpus(&u.r.wValue);
- le16_to_cpus(&u.r.wIndex);
- le16_to_cpus(&u.r.wLength);
-
ep_dbg(ep, "SETUP %02x.%02x v%04x i%04x l%04x\n",
u.r.bRequestType, u.r.bRequest,
- u.r.wValue, u.r.wIndex, u.r.wLength);
+ le16_to_cpu(u.r.wValue), le16_to_cpu(u.r.wIndex),
+ le16_to_cpu(u.r.wLength));
if (unlikely(have_extrabytes))
goto stall;
@@ -2296,7 +2293,8 @@
{
struct pxa_udc *udc = platform_get_drvdata(_dev);
- udc_disable(udc);
+ if (udc_readl(udc, UDCCR) & UDCCR_UDE)
+ udc_disable(udc);
}
#ifdef CONFIG_PM
@@ -2361,9 +2359,8 @@
* Upon exit from sleep mode and before clearing OTGPH,
* Software must configure the USB OTG pad, UDC, and UHC
* to the state they were in before entering sleep mode.
- *
- * Should be : PSSR |= PSSR_OTGPH;
*/
+ PSSR |= PSSR_OTGPH;
return 0;
}
@@ -2387,6 +2384,9 @@
static int __init udc_init(void)
{
+ if (!cpu_is_pxa27x())
+ return -ENODEV;
+
printk(KERN_INFO "%s: version %s\n", driver_name, DRIVER_VERSION);
return platform_driver_probe(&udc_driver, pxa_udc_probe);
}
diff --git a/drivers/usb/gadget/pxa27x_udc.h b/drivers/usb/gadget/pxa27x_udc.h
index 1d1b7936..97453db 100644
--- a/drivers/usb/gadget/pxa27x_udc.h
+++ b/drivers/usb/gadget/pxa27x_udc.h
@@ -484,4 +484,12 @@
#define ep_warn(ep, fmt, arg...) \
dev_warn(ep->dev->dev, "%s:%s:" fmt, EPNAME(ep), __func__, ## arg)
+/*
+ * Cannot include pxa-regs.h, as register names are similar.
+ * So PSSR is redefined here. This should be removed once UDC registers will
+ * be gone from pxa-regs.h.
+ */
+#define PSSR __REG(0x40F00004) /* Power Manager Sleep Status */
+#define PSSR_OTGPH (1 << 6) /* OTG Peripheral Hold */
+
#endif /* __LINUX_USB_GADGET_PXA27X_H */
diff --git a/drivers/usb/gadget/serial.c b/drivers/usb/gadget/serial.c
index 54cdd6f..fa019fa 100644
--- a/drivers/usb/gadget/serial.c
+++ b/drivers/usb/gadget/serial.c
@@ -14,7 +14,6 @@
* This software is distributed under the terms of the GNU General
* Public License ("GPL") as published by the Free Software Foundation,
* either version 2 of that License or (at your option) any later version.
- *
*/
#include <linux/kernel.h>
@@ -33,7 +32,7 @@
/* Defines */
#define GS_VERSION_STR "v2.2"
-#define GS_VERSION_NUM 0x0202
+#define GS_VERSION_NUM 0x2200
#define GS_LONG_NAME "Gadget Serial"
#define GS_SHORT_NAME "g_serial"
@@ -41,7 +40,11 @@
#define GS_MAJOR 127
#define GS_MINOR_START 0
-#define GS_NUM_PORTS 16
+/* REVISIT only one port is supported for now;
+ * see gs_{send,recv}_packet() ... no multiplexing,
+ * and no support for multiple ACM devices.
+ */
+#define GS_NUM_PORTS 1
#define GS_NUM_CONFIGS 1
#define GS_NO_CONFIG_ID 0
@@ -65,6 +68,9 @@
#define GS_DEFAULT_USE_ACM 0
+/* 9600-8-N-1 ... matches init_termios.c_cflag and defaults
+ * expected by "usbser.sys" on MS-Windows.
+ */
#define GS_DEFAULT_DTE_RATE 9600
#define GS_DEFAULT_DATA_BITS 8
#define GS_DEFAULT_PARITY USB_CDC_NO_PARITY
@@ -107,10 +113,6 @@
#define GS_NOTIFY_MAXPACKET 8
-/* Structures */
-
-struct gs_dev;
-
/* circular buffer */
struct gs_buf {
unsigned int buf_size;
@@ -119,12 +121,6 @@
char *buf_put;
};
-/* list of requests */
-struct gs_req_entry {
- struct list_head re_entry;
- struct usb_request *re_req;
-};
-
/* the port structure holds info for each port, one for each minor number */
struct gs_port {
struct gs_dev *port_dev; /* pointer to device struct */
@@ -164,26 +160,7 @@
/* Functions */
-/* module */
-static int __init gs_module_init(void);
-static void __exit gs_module_exit(void);
-
-/* tty driver */
-static int gs_open(struct tty_struct *tty, struct file *file);
-static void gs_close(struct tty_struct *tty, struct file *file);
-static int gs_write(struct tty_struct *tty,
- const unsigned char *buf, int count);
-static int gs_put_char(struct tty_struct *tty, unsigned char ch);
-static void gs_flush_chars(struct tty_struct *tty);
-static int gs_write_room(struct tty_struct *tty);
-static int gs_chars_in_buffer(struct tty_struct *tty);
-static void gs_throttle(struct tty_struct * tty);
-static void gs_unthrottle(struct tty_struct * tty);
-static void gs_break(struct tty_struct *tty, int break_state);
-static int gs_ioctl(struct tty_struct *tty, struct file *file,
- unsigned int cmd, unsigned long arg);
-static void gs_set_termios(struct tty_struct *tty, struct ktermios *old);
-
+/* tty driver internals */
static int gs_send(struct gs_dev *dev);
static int gs_send_packet(struct gs_dev *dev, char *packet,
unsigned int size);
@@ -192,19 +169,7 @@
static void gs_read_complete(struct usb_ep *ep, struct usb_request *req);
static void gs_write_complete(struct usb_ep *ep, struct usb_request *req);
-/* gadget driver */
-static int gs_bind(struct usb_gadget *gadget);
-static void gs_unbind(struct usb_gadget *gadget);
-static int gs_setup(struct usb_gadget *gadget,
- const struct usb_ctrlrequest *ctrl);
-static int gs_setup_standard(struct usb_gadget *gadget,
- const struct usb_ctrlrequest *ctrl);
-static int gs_setup_class(struct usb_gadget *gadget,
- const struct usb_ctrlrequest *ctrl);
-static void gs_setup_complete(struct usb_ep *ep, struct usb_request *req);
-static void gs_setup_complete_set_line_coding(struct usb_ep *ep,
- struct usb_request *req);
-static void gs_disconnect(struct usb_gadget *gadget);
+/* gadget driver internals */
static int gs_set_config(struct gs_dev *dev, unsigned config);
static void gs_reset_config(struct gs_dev *dev);
static int gs_build_config_buf(u8 *buf, struct usb_gadget *g,
@@ -214,10 +179,6 @@
gfp_t kmalloc_flags);
static void gs_free_req(struct usb_ep *ep, struct usb_request *req);
-static struct gs_req_entry *gs_alloc_req_entry(struct usb_ep *ep, unsigned len,
- gfp_t kmalloc_flags);
-static void gs_free_req_entry(struct usb_ep *ep, struct gs_req_entry *req);
-
static int gs_alloc_ports(struct gs_dev *dev, gfp_t kmalloc_flags);
static void gs_free_ports(struct gs_dev *dev);
@@ -232,62 +193,15 @@
static unsigned int gs_buf_get(struct gs_buf *gb, char *buf,
unsigned int count);
-/* external functions */
-extern int net2280_set_fifo_mode(struct usb_gadget *gadget, int mode);
-
/* Globals */
static struct gs_dev *gs_device;
-static const char *EP_IN_NAME;
-static const char *EP_OUT_NAME;
-static const char *EP_NOTIFY_NAME;
-
static struct mutex gs_open_close_lock[GS_NUM_PORTS];
-static unsigned int read_q_size = GS_DEFAULT_READ_Q_SIZE;
-static unsigned int write_q_size = GS_DEFAULT_WRITE_Q_SIZE;
-static unsigned int write_buf_size = GS_DEFAULT_WRITE_BUF_SIZE;
-
-static unsigned int use_acm = GS_DEFAULT_USE_ACM;
-
-
-/* tty driver struct */
-static const struct tty_operations gs_tty_ops = {
- .open = gs_open,
- .close = gs_close,
- .write = gs_write,
- .put_char = gs_put_char,
- .flush_chars = gs_flush_chars,
- .write_room = gs_write_room,
- .ioctl = gs_ioctl,
- .set_termios = gs_set_termios,
- .throttle = gs_throttle,
- .unthrottle = gs_unthrottle,
- .break_ctl = gs_break,
- .chars_in_buffer = gs_chars_in_buffer,
-};
-static struct tty_driver *gs_tty_driver;
-
-/* gadget driver struct */
-static struct usb_gadget_driver gs_gadget_driver = {
-#ifdef CONFIG_USB_GADGET_DUALSPEED
- .speed = USB_SPEED_HIGH,
-#else
- .speed = USB_SPEED_FULL,
-#endif /* CONFIG_USB_GADGET_DUALSPEED */
- .function = GS_LONG_NAME,
- .bind = gs_bind,
- .unbind = gs_unbind,
- .setup = gs_setup,
- .disconnect = gs_disconnect,
- .driver = {
- .name = GS_SHORT_NAME,
- },
-};
-
+/*-------------------------------------------------------------------------*/
/* USB descriptors */
@@ -304,7 +218,6 @@
static struct usb_string gs_strings[] = {
{ GS_MANUFACTURER_STR_ID, manufacturer },
{ GS_PRODUCT_STR_ID, GS_LONG_NAME },
- { GS_SERIAL_STR_ID, "0" },
{ GS_BULK_CONFIG_STR_ID, "Gadget Serial Bulk" },
{ GS_ACM_CONFIG_STR_ID, "Gadget Serial CDC ACM" },
{ GS_CONTROL_STR_ID, "Gadget Serial Control" },
@@ -327,7 +240,6 @@
.idProduct = __constant_cpu_to_le16(GS_PRODUCT_ID),
.iManufacturer = GS_MANUFACTURER_STR_ID,
.iProduct = GS_PRODUCT_STR_ID,
- .iSerialNumber = GS_SERIAL_STR_ID,
.bNumConfigurations = GS_NUM_CONFIGS,
};
@@ -364,7 +276,7 @@
.bDescriptorType = USB_DT_INTERFACE,
.bInterfaceNumber = GS_BULK_INTERFACE_ID,
.bNumEndpoints = 2,
- .bInterfaceClass = USB_CLASS_CDC_DATA,
+ .bInterfaceClass = USB_CLASS_VENDOR_SPEC,
.bInterfaceSubClass = 0,
.bInterfaceProtocol = 0,
.iInterface = GS_DATA_STR_ID,
@@ -521,6 +433,8 @@
};
+/*-------------------------------------------------------------------------*/
+
/* Module */
MODULE_DESCRIPTION(GS_LONG_NAME);
MODULE_AUTHOR("Al Borchers");
@@ -531,84 +445,23 @@
MODULE_PARM_DESC(debug, "Enable debugging, 0=off, 1=on");
#endif
+static unsigned int read_q_size = GS_DEFAULT_READ_Q_SIZE;
module_param(read_q_size, uint, S_IRUGO);
MODULE_PARM_DESC(read_q_size, "Read request queue size, default=32");
+static unsigned int write_q_size = GS_DEFAULT_WRITE_Q_SIZE;
module_param(write_q_size, uint, S_IRUGO);
MODULE_PARM_DESC(write_q_size, "Write request queue size, default=32");
+static unsigned int write_buf_size = GS_DEFAULT_WRITE_BUF_SIZE;
module_param(write_buf_size, uint, S_IRUGO);
MODULE_PARM_DESC(write_buf_size, "Write buffer size, default=8192");
+static unsigned int use_acm = GS_DEFAULT_USE_ACM;
module_param(use_acm, uint, S_IRUGO);
MODULE_PARM_DESC(use_acm, "Use CDC ACM, 0=no, 1=yes, default=no");
-module_init(gs_module_init);
-module_exit(gs_module_exit);
-
-/*
-* gs_module_init
-*
-* Register as a USB gadget driver and a tty driver.
-*/
-static int __init gs_module_init(void)
-{
- int i;
- int retval;
-
- retval = usb_gadget_register_driver(&gs_gadget_driver);
- if (retval) {
- pr_err("gs_module_init: cannot register gadget driver, "
- "ret=%d\n", retval);
- return retval;
- }
-
- gs_tty_driver = alloc_tty_driver(GS_NUM_PORTS);
- if (!gs_tty_driver)
- return -ENOMEM;
- gs_tty_driver->owner = THIS_MODULE;
- gs_tty_driver->driver_name = GS_SHORT_NAME;
- gs_tty_driver->name = "ttygs";
- gs_tty_driver->major = GS_MAJOR;
- gs_tty_driver->minor_start = GS_MINOR_START;
- gs_tty_driver->type = TTY_DRIVER_TYPE_SERIAL;
- gs_tty_driver->subtype = SERIAL_TYPE_NORMAL;
- gs_tty_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
- gs_tty_driver->init_termios = tty_std_termios;
- gs_tty_driver->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
- tty_set_operations(gs_tty_driver, &gs_tty_ops);
-
- for (i=0; i < GS_NUM_PORTS; i++)
- mutex_init(&gs_open_close_lock[i]);
-
- retval = tty_register_driver(gs_tty_driver);
- if (retval) {
- usb_gadget_unregister_driver(&gs_gadget_driver);
- put_tty_driver(gs_tty_driver);
- pr_err("gs_module_init: cannot register tty driver, "
- "ret=%d\n", retval);
- return retval;
- }
-
- pr_info("gs_module_init: %s %s loaded\n",
- GS_LONG_NAME, GS_VERSION_STR);
- return 0;
-}
-
-/*
-* gs_module_exit
-*
-* Unregister as a tty driver and a USB gadget driver.
-*/
-static void __exit gs_module_exit(void)
-{
- tty_unregister_driver(gs_tty_driver);
- put_tty_driver(gs_tty_driver);
- usb_gadget_unregister_driver(&gs_gadget_driver);
-
- pr_info("gs_module_exit: %s %s unloaded\n",
- GS_LONG_NAME, GS_VERSION_STR);
-}
+/*-------------------------------------------------------------------------*/
/* TTY Driver */
@@ -753,15 +606,15 @@
* gs_close
*/
-#define GS_WRITE_FINISHED_EVENT_SAFELY(p) \
-({ \
- int cond; \
- \
- spin_lock_irq(&(p)->port_lock); \
- cond = !(p)->port_dev || !gs_buf_data_avail((p)->port_write_buf); \
- spin_unlock_irq(&(p)->port_lock); \
- cond; \
-})
+static int gs_write_finished_event_safely(struct gs_port *p)
+{
+ int cond;
+
+ spin_lock_irq(&(p)->port_lock);
+ cond = !(p)->port_dev || !gs_buf_data_avail((p)->port_write_buf);
+ spin_unlock_irq(&(p)->port_lock);
+ return cond;
+}
static void gs_close(struct tty_struct *tty, struct file *file)
{
@@ -807,7 +660,7 @@
if (gs_buf_data_avail(port->port_write_buf) > 0) {
spin_unlock_irq(&port->port_lock);
wait_event_interruptible_timeout(port->port_write_wait,
- GS_WRITE_FINISHED_EVENT_SAFELY(port),
+ gs_write_finished_event_safely(port),
GS_CLOSE_TIMEOUT * HZ);
spin_lock_irq(&port->port_lock);
}
@@ -1065,6 +918,23 @@
{
}
+static const struct tty_operations gs_tty_ops = {
+ .open = gs_open,
+ .close = gs_close,
+ .write = gs_write,
+ .put_char = gs_put_char,
+ .flush_chars = gs_flush_chars,
+ .write_room = gs_write_room,
+ .ioctl = gs_ioctl,
+ .set_termios = gs_set_termios,
+ .throttle = gs_throttle,
+ .unthrottle = gs_unthrottle,
+ .break_ctl = gs_break,
+ .chars_in_buffer = gs_chars_in_buffer,
+};
+
+/*-------------------------------------------------------------------------*/
+
/*
* gs_send
*
@@ -1080,7 +950,6 @@
unsigned long flags;
struct usb_ep *ep;
struct usb_request *req;
- struct gs_req_entry *req_entry;
if (dev == NULL) {
pr_err("gs_send: NULL device pointer\n");
@@ -1093,10 +962,8 @@
while(!list_empty(&dev->dev_req_list)) {
- req_entry = list_entry(dev->dev_req_list.next,
- struct gs_req_entry, re_entry);
-
- req = req_entry->re_req;
+ req = list_entry(dev->dev_req_list.next,
+ struct usb_request, list);
len = gs_send_packet(dev, req->buf, ep->maxpacket);
@@ -1106,7 +973,7 @@
*((unsigned char *)req->buf),
*((unsigned char *)req->buf+1),
*((unsigned char *)req->buf+2));
- list_del(&req_entry->re_entry);
+ list_del(&req->list);
req->length = len;
spin_unlock_irqrestore(&dev->dev_lock, flags);
if ((ret=usb_ep_queue(ep, req, GFP_ATOMIC))) {
@@ -1289,7 +1156,6 @@
static void gs_write_complete(struct usb_ep *ep, struct usb_request *req)
{
struct gs_dev *dev = ep->driver_data;
- struct gs_req_entry *gs_req = req->context;
if (dev == NULL) {
pr_err("gs_write_complete: NULL device pointer\n");
@@ -1300,13 +1166,8 @@
case 0:
/* normal completion */
requeue:
- if (gs_req == NULL) {
- pr_err("gs_write_complete: NULL request pointer\n");
- return;
- }
-
spin_lock(&dev->dev_lock);
- list_add(&gs_req->re_entry, &dev->dev_req_list);
+ list_add(&req->list, &dev->dev_req_list);
spin_unlock(&dev->dev_lock);
gs_send(dev);
@@ -1328,9 +1189,39 @@
}
}
+/*-------------------------------------------------------------------------*/
+
/* Gadget Driver */
/*
+ * gs_unbind
+ *
+ * Called on module unload. Frees the control request and device
+ * structure.
+ */
+static void /* __init_or_exit */ gs_unbind(struct usb_gadget *gadget)
+{
+ struct gs_dev *dev = get_gadget_data(gadget);
+
+ gs_device = NULL;
+
+ /* read/write requests already freed, only control request remains */
+ if (dev != NULL) {
+ if (dev->dev_ctrl_req != NULL) {
+ gs_free_req(gadget->ep0, dev->dev_ctrl_req);
+ dev->dev_ctrl_req = NULL;
+ }
+ gs_reset_config(dev);
+ gs_free_ports(dev);
+ kfree(dev);
+ set_gadget_data(gadget, NULL);
+ }
+
+ pr_info("gs_unbind: %s %s unbound\n", GS_LONG_NAME,
+ GS_VERSION_STR);
+}
+
+/*
* gs_bind
*
* Called on module load. Allocates and initializes the device
@@ -1362,19 +1253,23 @@
__constant_cpu_to_le16(GS_VERSION_NUM|0x0099);
}
+ dev = kzalloc(sizeof(struct gs_dev), GFP_KERNEL);
+ if (dev == NULL)
+ return -ENOMEM;
+
usb_ep_autoconfig_reset(gadget);
ep = usb_ep_autoconfig(gadget, &gs_fullspeed_in_desc);
if (!ep)
goto autoconf_fail;
- EP_IN_NAME = ep->name;
- ep->driver_data = ep; /* claim the endpoint */
+ dev->dev_in_ep = ep;
+ ep->driver_data = dev; /* claim the endpoint */
ep = usb_ep_autoconfig(gadget, &gs_fullspeed_out_desc);
if (!ep)
goto autoconf_fail;
- EP_OUT_NAME = ep->name;
- ep->driver_data = ep; /* claim the endpoint */
+ dev->dev_out_ep = ep;
+ ep->driver_data = dev; /* claim the endpoint */
if (use_acm) {
ep = usb_ep_autoconfig(gadget, &gs_fullspeed_notify_desc);
@@ -1384,8 +1279,8 @@
}
gs_device_desc.idProduct = __constant_cpu_to_le16(
GS_CDC_PRODUCT_ID),
- EP_NOTIFY_NAME = ep->name;
- ep->driver_data = ep; /* claim the endpoint */
+ dev->dev_notify_ep = ep;
+ ep->driver_data = dev; /* claim the endpoint */
}
gs_device_desc.bDeviceClass = use_acm
@@ -1415,9 +1310,7 @@
gs_acm_config_desc.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
}
- gs_device = dev = kzalloc(sizeof(struct gs_dev), GFP_KERNEL);
- if (dev == NULL)
- return -ENOMEM;
+ gs_device = dev;
snprintf(manufacturer, sizeof(manufacturer), "%s %s with %s",
init_utsname()->sysname, init_utsname()->release,
@@ -1441,8 +1334,6 @@
gs_unbind(gadget);
return -ENOMEM;
}
- dev->dev_ctrl_req->complete = gs_setup_complete;
-
gadget->ep0->driver_data = dev;
pr_info("gs_bind: %s %s bound\n",
@@ -1451,99 +1342,11 @@
return 0;
autoconf_fail:
+ kfree(dev);
pr_err("gs_bind: cannot autoconfigure on %s\n", gadget->name);
return -ENODEV;
}
-/*
- * gs_unbind
- *
- * Called on module unload. Frees the control request and device
- * structure.
- */
-static void /* __init_or_exit */ gs_unbind(struct usb_gadget *gadget)
-{
- struct gs_dev *dev = get_gadget_data(gadget);
-
- gs_device = NULL;
-
- /* read/write requests already freed, only control request remains */
- if (dev != NULL) {
- if (dev->dev_ctrl_req != NULL) {
- gs_free_req(gadget->ep0, dev->dev_ctrl_req);
- dev->dev_ctrl_req = NULL;
- }
- gs_free_ports(dev);
- if (dev->dev_notify_ep)
- usb_ep_disable(dev->dev_notify_ep);
- if (dev->dev_in_ep)
- usb_ep_disable(dev->dev_in_ep);
- if (dev->dev_out_ep)
- usb_ep_disable(dev->dev_out_ep);
- kfree(dev);
- set_gadget_data(gadget, NULL);
- }
-
- pr_info("gs_unbind: %s %s unbound\n", GS_LONG_NAME,
- GS_VERSION_STR);
-}
-
-/*
- * gs_setup
- *
- * Implements all the control endpoint functionality that's not
- * handled in hardware or the hardware driver.
- *
- * Returns the size of the data sent to the host, or a negative
- * error number.
- */
-static int gs_setup(struct usb_gadget *gadget,
- const struct usb_ctrlrequest *ctrl)
-{
- int ret = -EOPNOTSUPP;
- struct gs_dev *dev = get_gadget_data(gadget);
- struct usb_request *req = dev->dev_ctrl_req;
- u16 wIndex = le16_to_cpu(ctrl->wIndex);
- u16 wValue = le16_to_cpu(ctrl->wValue);
- u16 wLength = le16_to_cpu(ctrl->wLength);
-
- req->complete = gs_setup_complete;
-
- switch (ctrl->bRequestType & USB_TYPE_MASK) {
- case USB_TYPE_STANDARD:
- ret = gs_setup_standard(gadget,ctrl);
- break;
-
- case USB_TYPE_CLASS:
- ret = gs_setup_class(gadget,ctrl);
- break;
-
- default:
- pr_err("gs_setup: unknown request, type=%02x, request=%02x, "
- "value=%04x, index=%04x, length=%d\n",
- ctrl->bRequestType, ctrl->bRequest,
- wValue, wIndex, wLength);
- break;
- }
-
- /* respond with data transfer before status phase? */
- if (ret >= 0) {
- req->length = ret;
- req->zero = ret < wLength
- && (ret % gadget->ep0->maxpacket) == 0;
- ret = usb_ep_queue(gadget->ep0, req, GFP_ATOMIC);
- if (ret < 0) {
- pr_err("gs_setup: cannot queue response, ret=%d\n",
- ret);
- req->status = 0;
- gs_setup_complete(gadget->ep0, req);
- }
- }
-
- /* device either stalls (ret < 0) or reports success */
- return ret;
-}
-
static int gs_setup_standard(struct usb_gadget *gadget,
const struct usb_ctrlrequest *ctrl)
{
@@ -1673,6 +1476,42 @@
return ret;
}
+static void gs_setup_complete_set_line_coding(struct usb_ep *ep,
+ struct usb_request *req)
+{
+ struct gs_dev *dev = ep->driver_data;
+ struct gs_port *port = dev->dev_port[0]; /* ACM only has one port */
+
+ switch (req->status) {
+ case 0:
+ /* normal completion */
+ if (req->actual != sizeof(port->port_line_coding))
+ usb_ep_set_halt(ep);
+ else if (port) {
+ struct usb_cdc_line_coding *value = req->buf;
+
+ /* REVISIT: we currently just remember this data.
+ * If we change that, (a) validate it first, then
+ * (b) update whatever hardware needs updating.
+ */
+ spin_lock(&port->port_lock);
+ port->port_line_coding = *value;
+ spin_unlock(&port->port_lock);
+ }
+ break;
+
+ case -ESHUTDOWN:
+ /* disconnect */
+ gs_free_req(ep, req);
+ break;
+
+ default:
+ /* unexpected */
+ break;
+ }
+ return;
+}
+
static int gs_setup_class(struct usb_gadget *gadget,
const struct usb_ctrlrequest *ctrl)
{
@@ -1734,42 +1573,6 @@
return ret;
}
-static void gs_setup_complete_set_line_coding(struct usb_ep *ep,
- struct usb_request *req)
-{
- struct gs_dev *dev = ep->driver_data;
- struct gs_port *port = dev->dev_port[0]; /* ACM only has one port */
-
- switch (req->status) {
- case 0:
- /* normal completion */
- if (req->actual != sizeof(port->port_line_coding))
- usb_ep_set_halt(ep);
- else if (port) {
- struct usb_cdc_line_coding *value = req->buf;
-
- /* REVISIT: we currently just remember this data.
- * If we change that, (a) validate it first, then
- * (b) update whatever hardware needs updating.
- */
- spin_lock(&port->port_lock);
- port->port_line_coding = *value;
- spin_unlock(&port->port_lock);
- }
- break;
-
- case -ESHUTDOWN:
- /* disconnect */
- gs_free_req(ep, req);
- break;
-
- default:
- /* unexpected */
- break;
- }
- return;
-}
-
/*
* gs_setup_complete
*/
@@ -1783,6 +1586,62 @@
}
/*
+ * gs_setup
+ *
+ * Implements all the control endpoint functionality that's not
+ * handled in hardware or the hardware driver.
+ *
+ * Returns the size of the data sent to the host, or a negative
+ * error number.
+ */
+static int gs_setup(struct usb_gadget *gadget,
+ const struct usb_ctrlrequest *ctrl)
+{
+ int ret = -EOPNOTSUPP;
+ struct gs_dev *dev = get_gadget_data(gadget);
+ struct usb_request *req = dev->dev_ctrl_req;
+ u16 wIndex = le16_to_cpu(ctrl->wIndex);
+ u16 wValue = le16_to_cpu(ctrl->wValue);
+ u16 wLength = le16_to_cpu(ctrl->wLength);
+
+ req->complete = gs_setup_complete;
+
+ switch (ctrl->bRequestType & USB_TYPE_MASK) {
+ case USB_TYPE_STANDARD:
+ ret = gs_setup_standard(gadget, ctrl);
+ break;
+
+ case USB_TYPE_CLASS:
+ ret = gs_setup_class(gadget, ctrl);
+ break;
+
+ default:
+ pr_err("gs_setup: unknown request, type=%02x, request=%02x, "
+ "value=%04x, index=%04x, length=%d\n",
+ ctrl->bRequestType, ctrl->bRequest,
+ wValue, wIndex, wLength);
+ break;
+ }
+
+ /* respond with data transfer before status phase? */
+ if (ret >= 0) {
+ req->length = ret;
+ req->zero = ret < wLength
+ && (ret % gadget->ep0->maxpacket) == 0;
+ ret = usb_ep_queue(gadget->ep0, req, GFP_ATOMIC);
+ if (ret < 0) {
+ pr_err("gs_setup: cannot queue response, ret=%d\n",
+ ret);
+ req->status = 0;
+ gs_setup_complete(gadget->ep0, req);
+ }
+ }
+
+ /* device either stalls (ret < 0) or reports success */
+ return ret;
+}
+
+/*
* gs_disconnect
*
* Called when the device is disconnected. Frees the closed
@@ -1811,6 +1670,23 @@
pr_info("gs_disconnect: %s disconnected\n", GS_LONG_NAME);
}
+static struct usb_gadget_driver gs_gadget_driver = {
+#ifdef CONFIG_USB_GADGET_DUALSPEED
+ .speed = USB_SPEED_HIGH,
+#else
+ .speed = USB_SPEED_FULL,
+#endif /* CONFIG_USB_GADGET_DUALSPEED */
+ .function = GS_LONG_NAME,
+ .bind = gs_bind,
+ .unbind = gs_unbind,
+ .setup = gs_setup,
+ .disconnect = gs_disconnect,
+ .driver = {
+ .name = GS_SHORT_NAME,
+ .owner = THIS_MODULE,
+ },
+};
+
/*
* gs_set_config
*
@@ -1826,9 +1702,8 @@
int ret = 0;
struct usb_gadget *gadget = dev->dev_gadget;
struct usb_ep *ep;
- struct usb_endpoint_descriptor *ep_desc;
+ struct usb_endpoint_descriptor *out, *in, *notify;
struct usb_request *req;
- struct gs_req_entry *req_entry;
if (dev == NULL) {
pr_err("gs_set_config: NULL device pointer\n");
@@ -1846,86 +1721,62 @@
case GS_BULK_CONFIG_ID:
if (use_acm)
return -EINVAL;
- /* device specific optimizations */
- if (gadget_is_net2280(gadget))
- net2280_set_fifo_mode(gadget, 1);
break;
case GS_ACM_CONFIG_ID:
if (!use_acm)
return -EINVAL;
- /* device specific optimizations */
- if (gadget_is_net2280(gadget))
- net2280_set_fifo_mode(gadget, 1);
break;
default:
return -EINVAL;
}
- dev->dev_config = config;
-
- gadget_for_each_ep(ep, gadget) {
-
- if (EP_NOTIFY_NAME
- && strcmp(ep->name, EP_NOTIFY_NAME) == 0) {
- ep_desc = choose_ep_desc(gadget,
+ in = choose_ep_desc(gadget,
+ &gs_highspeed_in_desc,
+ &gs_fullspeed_in_desc);
+ out = choose_ep_desc(gadget,
+ &gs_highspeed_out_desc,
+ &gs_fullspeed_out_desc);
+ notify = dev->dev_notify_ep
+ ? choose_ep_desc(gadget,
&gs_highspeed_notify_desc,
- &gs_fullspeed_notify_desc);
- ret = usb_ep_enable(ep,ep_desc);
- if (ret == 0) {
- ep->driver_data = dev;
- dev->dev_notify_ep = ep;
- dev->dev_notify_ep_desc = ep_desc;
- } else {
- pr_err("gs_set_config: cannot enable NOTIFY "
- "endpoint %s, ret=%d\n",
- ep->name, ret);
- goto exit_reset_config;
- }
- }
+ &gs_fullspeed_notify_desc)
+ : NULL;
- else if (strcmp(ep->name, EP_IN_NAME) == 0) {
- ep_desc = choose_ep_desc(gadget,
- &gs_highspeed_in_desc,
- &gs_fullspeed_in_desc);
- ret = usb_ep_enable(ep,ep_desc);
- if (ret == 0) {
- ep->driver_data = dev;
- dev->dev_in_ep = ep;
- dev->dev_in_ep_desc = ep_desc;
- } else {
- pr_err("gs_set_config: cannot enable IN "
- "endpoint %s, ret=%d\n",
- ep->name, ret);
- goto exit_reset_config;
- }
- }
-
- else if (strcmp(ep->name, EP_OUT_NAME) == 0) {
- ep_desc = choose_ep_desc(gadget,
- &gs_highspeed_out_desc,
- &gs_fullspeed_out_desc);
- ret = usb_ep_enable(ep,ep_desc);
- if (ret == 0) {
- ep->driver_data = dev;
- dev->dev_out_ep = ep;
- dev->dev_out_ep_desc = ep_desc;
- } else {
- pr_err("gs_set_config: cannot enable OUT "
- "endpoint %s, ret=%d\n",
- ep->name, ret);
- goto exit_reset_config;
- }
- }
-
+ ret = usb_ep_enable(dev->dev_in_ep, in);
+ if (ret == 0) {
+ dev->dev_in_ep_desc = in;
+ } else {
+ pr_debug("%s: cannot enable %s %s, ret=%d\n",
+ __func__, "IN", dev->dev_in_ep->name, ret);
+ return ret;
}
- if (dev->dev_in_ep == NULL || dev->dev_out_ep == NULL
- || (config != GS_BULK_CONFIG_ID && dev->dev_notify_ep == NULL)) {
- pr_err("gs_set_config: cannot find endpoints\n");
- ret = -ENODEV;
- goto exit_reset_config;
+ ret = usb_ep_enable(dev->dev_out_ep, out);
+ if (ret == 0) {
+ dev->dev_out_ep_desc = out;
+ } else {
+ pr_debug("%s: cannot enable %s %s, ret=%d\n",
+ __func__, "OUT", dev->dev_out_ep->name, ret);
+fail0:
+ usb_ep_disable(dev->dev_in_ep);
+ return ret;
}
+ if (notify) {
+ ret = usb_ep_enable(dev->dev_notify_ep, notify);
+ if (ret == 0) {
+ dev->dev_notify_ep_desc = notify;
+ } else {
+ pr_debug("%s: cannot enable %s %s, ret=%d\n",
+ __func__, "NOTIFY",
+ dev->dev_notify_ep->name, ret);
+ usb_ep_disable(dev->dev_out_ep);
+ goto fail0;
+ }
+ }
+
+ dev->dev_config = config;
+
/* allocate and queue read requests */
ep = dev->dev_out_ep;
for (i=0; i<read_q_size && ret == 0; i++) {
@@ -1946,9 +1797,10 @@
/* allocate write requests, and put on free list */
ep = dev->dev_in_ep;
for (i=0; i<write_q_size; i++) {
- if ((req_entry=gs_alloc_req_entry(ep, ep->maxpacket, GFP_ATOMIC))) {
- req_entry->re_req->complete = gs_write_complete;
- list_add(&req_entry->re_entry, &dev->dev_req_list);
+ req = gs_alloc_req(ep, ep->maxpacket, GFP_ATOMIC);
+ if (req) {
+ req->complete = gs_write_complete;
+ list_add(&req->list, &dev->dev_req_list);
} else {
pr_err("gs_set_config: cannot allocate "
"write requests\n");
@@ -1986,7 +1838,7 @@
*/
static void gs_reset_config(struct gs_dev *dev)
{
- struct gs_req_entry *req_entry;
+ struct usb_request *req;
if (dev == NULL) {
pr_err("gs_reset_config: NULL device pointer\n");
@@ -2000,26 +1852,18 @@
/* free write requests on the free list */
while(!list_empty(&dev->dev_req_list)) {
- req_entry = list_entry(dev->dev_req_list.next,
- struct gs_req_entry, re_entry);
- list_del(&req_entry->re_entry);
- gs_free_req_entry(dev->dev_in_ep, req_entry);
+ req = list_entry(dev->dev_req_list.next,
+ struct usb_request, list);
+ list_del(&req->list);
+ gs_free_req(dev->dev_in_ep, req);
}
/* disable endpoints, forcing completion of pending i/o; */
/* completion handlers free their requests in this case */
- if (dev->dev_notify_ep) {
+ if (dev->dev_notify_ep)
usb_ep_disable(dev->dev_notify_ep);
- dev->dev_notify_ep = NULL;
- }
- if (dev->dev_in_ep) {
- usb_ep_disable(dev->dev_in_ep);
- dev->dev_in_ep = NULL;
- }
- if (dev->dev_out_ep) {
- usb_ep_disable(dev->dev_out_ep);
- dev->dev_out_ep = NULL;
- }
+ usb_ep_disable(dev->dev_in_ep);
+ usb_ep_disable(dev->dev_out_ep);
}
/*
@@ -2113,46 +1957,6 @@
}
/*
- * gs_alloc_req_entry
- *
- * Allocates a request and its buffer, using the given
- * endpoint, buffer len, and kmalloc flags.
- */
-static struct gs_req_entry *
-gs_alloc_req_entry(struct usb_ep *ep, unsigned len, gfp_t kmalloc_flags)
-{
- struct gs_req_entry *req;
-
- req = kmalloc(sizeof(struct gs_req_entry), kmalloc_flags);
- if (req == NULL)
- return NULL;
-
- req->re_req = gs_alloc_req(ep, len, kmalloc_flags);
- if (req->re_req == NULL) {
- kfree(req);
- return NULL;
- }
-
- req->re_req->context = req;
-
- return req;
-}
-
-/*
- * gs_free_req_entry
- *
- * Frees a request and its buffer.
- */
-static void gs_free_req_entry(struct usb_ep *ep, struct gs_req_entry *req)
-{
- if (ep != NULL && req != NULL) {
- if (req->re_req != NULL)
- gs_free_req(ep, req->re_req);
- kfree(req);
- }
-}
-
-/*
* gs_alloc_ports
*
* Allocate all ports and set the gs_dev struct to point to them.
@@ -2233,6 +2037,8 @@
}
}
+/*-------------------------------------------------------------------------*/
+
/* Circular Buffer */
/*
@@ -2393,3 +2199,77 @@
return count;
}
+
+/*-------------------------------------------------------------------------*/
+
+static struct tty_driver *gs_tty_driver;
+
+/*
+ * gs_module_init
+ *
+ * Register as a USB gadget driver and a tty driver.
+ */
+static int __init gs_module_init(void)
+{
+ int i;
+ int retval;
+
+ retval = usb_gadget_register_driver(&gs_gadget_driver);
+ if (retval) {
+ pr_err("gs_module_init: cannot register gadget driver, "
+ "ret=%d\n", retval);
+ return retval;
+ }
+
+ gs_tty_driver = alloc_tty_driver(GS_NUM_PORTS);
+ if (!gs_tty_driver)
+ return -ENOMEM;
+ gs_tty_driver->owner = THIS_MODULE;
+ gs_tty_driver->driver_name = GS_SHORT_NAME;
+ gs_tty_driver->name = "ttygs";
+ gs_tty_driver->major = GS_MAJOR;
+ gs_tty_driver->minor_start = GS_MINOR_START;
+ gs_tty_driver->type = TTY_DRIVER_TYPE_SERIAL;
+ gs_tty_driver->subtype = SERIAL_TYPE_NORMAL;
+ gs_tty_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
+ gs_tty_driver->init_termios = tty_std_termios;
+ /* must match GS_DEFAULT_DTE_RATE and friends */
+ gs_tty_driver->init_termios.c_cflag =
+ B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+ gs_tty_driver->init_termios.c_ispeed = GS_DEFAULT_DTE_RATE;
+ gs_tty_driver->init_termios.c_ospeed = GS_DEFAULT_DTE_RATE;
+ tty_set_operations(gs_tty_driver, &gs_tty_ops);
+
+ for (i = 0; i < GS_NUM_PORTS; i++)
+ mutex_init(&gs_open_close_lock[i]);
+
+ retval = tty_register_driver(gs_tty_driver);
+ if (retval) {
+ usb_gadget_unregister_driver(&gs_gadget_driver);
+ put_tty_driver(gs_tty_driver);
+ pr_err("gs_module_init: cannot register tty driver, "
+ "ret=%d\n", retval);
+ return retval;
+ }
+
+ pr_info("gs_module_init: %s %s loaded\n",
+ GS_LONG_NAME, GS_VERSION_STR);
+ return 0;
+}
+module_init(gs_module_init);
+
+/*
+ * gs_module_exit
+ *
+ * Unregister as a tty driver and a USB gadget driver.
+ */
+static void __exit gs_module_exit(void)
+{
+ tty_unregister_driver(gs_tty_driver);
+ put_tty_driver(gs_tty_driver);
+ usb_gadget_unregister_driver(&gs_gadget_driver);
+
+ pr_info("gs_module_exit: %s %s unloaded\n",
+ GS_LONG_NAME, GS_VERSION_STR);
+}
+module_exit(gs_module_exit);
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 1ef6df3..228797e 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -300,8 +300,8 @@
module will be called r8a66597-hcd.
config SUPERH_ON_CHIP_R8A66597
- boolean "Enable SuperH on-chip USB like the R8A66597"
- depends on USB_R8A66597_HCD && CPU_SUBTYPE_SH7366
+ boolean "Enable SuperH on-chip R8A66597 USB"
+ depends on USB_R8A66597_HCD && (CPU_SUBTYPE_SH7366 || CPU_SUBTYPE_SH7723)
help
- Renesas SuperH processor has USB like the R8A66597.
- This driver supported processor is SH7366.
+ This driver enables support for the on-chip R8A66597 in the
+ SH7366 and SH7723 processors.
diff --git a/drivers/usb/host/ehci-au1xxx.c b/drivers/usb/host/ehci-au1xxx.c
index 8b5f991..08a4335 100644
--- a/drivers/usb/host/ehci-au1xxx.c
+++ b/drivers/usb/host/ehci-au1xxx.c
@@ -223,6 +223,7 @@
.bus_suspend = ehci_bus_suspend,
.bus_resume = ehci_bus_resume,
.relinquish_port = ehci_relinquish_port,
+ .port_handed_over = ehci_port_handed_over,
};
/*-------------------------------------------------------------------------*/
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index 6d9bed6..7370d61 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -269,7 +269,7 @@
if (retval)
return retval;
- ehci->is_tdi_rh_tt = 1;
+ hcd->has_tt = 1;
ehci->sbrn = 0x20;
@@ -295,10 +295,6 @@
*/
.reset = ehci_fsl_setup,
.start = ehci_run,
-#ifdef CONFIG_PM
- .suspend = ehci_bus_suspend,
- .resume = ehci_bus_resume,
-#endif
.stop = ehci_stop,
.shutdown = ehci_shutdown,
@@ -322,6 +318,7 @@
.bus_suspend = ehci_bus_suspend,
.bus_resume = ehci_bus_resume,
.relinquish_port = ehci_relinquish_port,
+ .port_handed_over = ehci_port_handed_over,
};
static int ehci_fsl_drv_probe(struct platform_device *pdev)
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index 382587c..740835b 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -609,7 +609,7 @@
}
break;
case USB_PORT_FEAT_C_SUSPEND:
- /* we auto-clear this feature */
+ clear_bit(wIndex, &ehci->port_c_suspend);
break;
case USB_PORT_FEAT_POWER:
if (HCS_PPC (ehci->hcs_params))
@@ -688,7 +688,7 @@
/* resume completed? */
else if (time_after_eq(jiffies,
ehci->reset_done[wIndex])) {
- status |= 1 << USB_PORT_FEAT_C_SUSPEND;
+ set_bit(wIndex, &ehci->port_c_suspend);
ehci->reset_done[wIndex] = 0;
/* stop resume signaling */
@@ -765,6 +765,8 @@
status |= 1 << USB_PORT_FEAT_RESET;
if (temp & PORT_POWER)
status |= 1 << USB_PORT_FEAT_POWER;
+ if (test_bit(wIndex, &ehci->port_c_suspend))
+ status |= 1 << USB_PORT_FEAT_C_SUSPEND;
#ifndef VERBOSE_DEBUG
if (status & ~0xffff) /* only if wPortChange is interesting */
@@ -875,3 +877,13 @@
set_owner(ehci, --portnum, PORT_OWNER);
}
+static int ehci_port_handed_over(struct usb_hcd *hcd, int portnum)
+{
+ struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+ u32 __iomem *reg;
+
+ if (ehci_is_TDI(ehci))
+ return 0;
+ reg = &ehci->regs->port_status[portnum - 1];
+ return ehci_readl(ehci, reg) & PORT_OWNER;
+}
diff --git a/drivers/usb/host/ehci-ixp4xx.c b/drivers/usb/host/ehci-ixp4xx.c
index 601c879..9d042f2 100644
--- a/drivers/usb/host/ehci-ixp4xx.c
+++ b/drivers/usb/host/ehci-ixp4xx.c
@@ -26,7 +26,7 @@
+ HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase));
ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
- ehci->is_tdi_rh_tt = 1;
+ hcd->has_tt = 1;
ehci_reset(ehci);
retval = ehci_init(hcd);
@@ -58,6 +58,8 @@
.bus_suspend = ehci_bus_suspend,
.bus_resume = ehci_bus_resume,
#endif
+ .relinquish_port = ehci_relinquish_port,
+ .port_handed_over = ehci_port_handed_over,
};
static int ixp4xx_ehci_probe(struct platform_device *pdev)
diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c
index d187d03..ab625f0 100644
--- a/drivers/usb/host/ehci-orion.c
+++ b/drivers/usb/host/ehci-orion.c
@@ -115,6 +115,8 @@
if (retval)
return retval;
+ hcd->has_tt = 1;
+
ehci_reset(ehci);
ehci_port_power(ehci, 0);
@@ -137,10 +139,6 @@
*/
.reset = ehci_orion_setup,
.start = ehci_run,
-#ifdef CONFIG_PM
- .suspend = ehci_bus_suspend,
- .resume = ehci_bus_resume,
-#endif
.stop = ehci_stop,
.shutdown = ehci_shutdown,
@@ -163,6 +161,8 @@
.hub_control = ehci_hub_control,
.bus_suspend = ehci_bus_suspend,
.bus_resume = ehci_bus_resume,
+ .relinquish_port = ehci_relinquish_port,
+ .port_handed_over = ehci_port_handed_over,
};
static void __init
@@ -248,7 +248,7 @@
ehci->regs = hcd->regs + 0x100 +
HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase));
ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
- ehci->is_tdi_rh_tt = 1;
+ hcd->has_tt = 1;
ehci->sbrn = 0x20;
/*
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index 5bb7f6b..c46a58f 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -129,7 +129,6 @@
switch (pdev->vendor) {
case PCI_VENDOR_ID_TDI:
if (pdev->device == PCI_DEVICE_ID_TDI_EHCI) {
- ehci->is_tdi_rh_tt = 1;
hcd->has_tt = 1;
tdi_reset(ehci);
}
@@ -379,7 +378,8 @@
.hub_control = ehci_hub_control,
.bus_suspend = ehci_bus_suspend,
.bus_resume = ehci_bus_resume,
- .relinquish_port = ehci_relinquish_port,
+ .relinquish_port = ehci_relinquish_port,
+ .port_handed_over = ehci_port_handed_over,
};
/*-------------------------------------------------------------------------*/
diff --git a/drivers/usb/host/ehci-ppc-of.c b/drivers/usb/host/ehci-ppc-of.c
index ee305b1..b018dee 100644
--- a/drivers/usb/host/ehci-ppc-of.c
+++ b/drivers/usb/host/ehci-ppc-of.c
@@ -76,6 +76,8 @@
.bus_suspend = ehci_bus_suspend,
.bus_resume = ehci_bus_resume,
#endif
+ .relinquish_port = ehci_relinquish_port,
+ .port_handed_over = ehci_port_handed_over,
};
diff --git a/drivers/usb/host/ehci-ppc-soc.c b/drivers/usb/host/ehci-ppc-soc.c
index 6c76036..529590e 100644
--- a/drivers/usb/host/ehci-ppc-soc.c
+++ b/drivers/usb/host/ehci-ppc-soc.c
@@ -163,6 +163,7 @@
.bus_suspend = ehci_bus_suspend,
.bus_resume = ehci_bus_resume,
.relinquish_port = ehci_relinquish_port,
+ .port_handed_over = ehci_port_handed_over,
};
static int ehci_hcd_ppc_soc_drv_probe(struct platform_device *pdev)
diff --git a/drivers/usb/host/ehci-ps3.c b/drivers/usb/host/ehci-ps3.c
index 69782221..37e6abe 100644
--- a/drivers/usb/host/ehci-ps3.c
+++ b/drivers/usb/host/ehci-ps3.c
@@ -73,6 +73,7 @@
.bus_resume = ehci_bus_resume,
#endif
.relinquish_port = ehci_relinquish_port,
+ .port_handed_over = ehci_port_handed_over,
};
static int ps3_ehci_probe(struct ps3_system_bus_device *dev)
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index be575e4..b7853c8 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -1349,18 +1349,27 @@
/* when's the last uframe this urb could start? */
max = now + mod;
- /* typical case: reuse current schedule. stream is still active,
- * and no gaps from host falling behind (irq delays etc)
+ /* Typical case: reuse current schedule, stream is still active.
+ * Hopefully there are no gaps from the host falling behind
+ * (irq delays etc), but if there are we'll take the next
+ * slot in the schedule, implicitly assuming URB_ISO_ASAP.
*/
if (likely (!list_empty (&stream->td_list))) {
start = stream->next_uframe;
if (start < now)
start += mod;
- if (likely ((start + sched->span) < max))
- goto ready;
- /* else fell behind; someday, try to reschedule */
- status = -EL2NSYNC;
- goto fail;
+
+ /* Fell behind (by up to twice the slop amount)? */
+ if (start >= max - 2 * 8 * SCHEDULE_SLOP)
+ start += stream->interval * DIV_ROUND_UP(
+ max - start, stream->interval) - mod;
+
+ /* Tried to schedule too far into the future? */
+ if (unlikely((start + sched->span) >= max)) {
+ status = -EFBIG;
+ goto fail;
+ }
+ goto ready;
}
/* need to schedule; when's the next (u)frame we could start?
@@ -1613,6 +1622,9 @@
} else if (likely ((t & EHCI_ISOC_ACTIVE) == 0)) {
desc->status = 0;
desc->actual_length = EHCI_ITD_LENGTH (t);
+ } else {
+ /* URB was too late */
+ desc->status = -EXDEV;
}
}
@@ -2095,7 +2107,7 @@
static void
scan_periodic (struct ehci_hcd *ehci)
{
- unsigned frame, clock, now_uframe, mod;
+ unsigned now_uframe, frame, clock, clock_frame, mod;
unsigned modified;
mod = ehci->periodic_size << 3;
@@ -2111,6 +2123,7 @@
else
clock = now_uframe + mod - 1;
clock %= mod;
+ clock_frame = clock >> 3;
for (;;) {
union ehci_shadow q, *q_p;
@@ -2157,22 +2170,26 @@
case Q_TYPE_ITD:
/* If this ITD is still active, leave it for
* later processing ... check the next entry.
+ * No need to check for activity unless the
+ * frame is current.
*/
- rmb ();
- for (uf = 0; uf < 8 && live; uf++) {
- if (0 == (q.itd->hw_transaction [uf]
- & ITD_ACTIVE(ehci)))
- continue;
- incomplete = true;
- q_p = &q.itd->itd_next;
- hw_p = &q.itd->hw_next;
- type = Q_NEXT_TYPE(ehci,
+ if (frame == clock_frame && live) {
+ rmb();
+ for (uf = 0; uf < 8; uf++) {
+ if (q.itd->hw_transaction[uf] &
+ ITD_ACTIVE(ehci))
+ break;
+ }
+ if (uf < 8) {
+ incomplete = true;
+ q_p = &q.itd->itd_next;
+ hw_p = &q.itd->hw_next;
+ type = Q_NEXT_TYPE(ehci,
q.itd->hw_next);
- q = *q_p;
- break;
+ q = *q_p;
+ break;
+ }
}
- if (uf < 8 && live)
- break;
/* Take finished ITDs out of the schedule
* and process them: recycle, maybe report
@@ -2189,9 +2206,12 @@
case Q_TYPE_SITD:
/* If this SITD is still active, leave it for
* later processing ... check the next entry.
+ * No need to check for activity unless the
+ * frame is current.
*/
- if ((q.sitd->hw_results & SITD_ACTIVE(ehci))
- && live) {
+ if (frame == clock_frame && live &&
+ (q.sitd->hw_results &
+ SITD_ACTIVE(ehci))) {
incomplete = true;
q_p = &q.sitd->sitd_next;
hw_p = &q.sitd->hw_next;
@@ -2260,6 +2280,7 @@
/* rescan the rest of this frame, then ... */
clock = now;
+ clock_frame = clock >> 3;
} else {
now_uframe++;
now_uframe %= mod;
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index bf92d20..35a0309 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -97,6 +97,8 @@
dedicated to the companion controller */
unsigned long owned_ports; /* which ports are
owned by the companion during a bus suspend */
+ unsigned long port_c_suspend; /* which ports have
+ the change-suspend feature turned on */
/* per-HC memory pools (could be per-bus, but ...) */
struct dma_pool *qh_pool; /* qh per active urb */
@@ -112,7 +114,6 @@
u32 command;
/* SILICON QUIRKS */
- unsigned is_tdi_rh_tt:1; /* TDI roothub with TT */
unsigned no_selective_suspend:1;
unsigned has_fsl_port_bug:1; /* FreeScale */
unsigned big_endian_mmio:1;
@@ -678,7 +679,7 @@
* needed (mostly in root hub code).
*/
-#define ehci_is_TDI(e) ((e)->is_tdi_rh_tt)
+#define ehci_is_TDI(e) (ehci_to_hcd(e)->has_tt)
/* Returns the speed of a device attached to a port on the root hub. */
static inline unsigned int
diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c
index 4ba96c1..65aa5ec 100644
--- a/drivers/usb/host/isp1760-hcd.c
+++ b/drivers/usb/host/isp1760-hcd.c
@@ -988,7 +988,7 @@
* This did not trigger for a long time now.
*/
printk(KERN_ERR "Reloading ptd %p/%p... qh %p readed: "
- "%d of %d done: %08x cur: %08x\n", qtd,
+ "%d of %zu done: %08x cur: %08x\n", qtd,
urb, qh, PTD_XFERRED_LENGTH(dw3),
qtd->length, done_map,
(1 << queue_entry));
@@ -1088,7 +1088,7 @@
} else if (usb_pipebulk(urb->pipe) && (length < qtd->length)) {
/* short BULK received */
- printk(KERN_ERR "short bulk, %d instead %d\n", length,
+ printk(KERN_ERR "short bulk, %d instead %zu\n", length,
qtd->length);
if (urb->transfer_flags & URB_SHORT_NOT_OK) {
urb->status = -EREMOTEIO;
@@ -2207,14 +2207,14 @@
goto err_put;
}
- ret = usb_add_hcd(hcd, irq, irqflags);
- if (ret)
- goto err_unmap;
-
hcd->irq = irq;
hcd->rsrc_start = res_start;
hcd->rsrc_len = res_len;
+ ret = usb_add_hcd(hcd, irq, irqflags);
+ if (ret)
+ goto err_unmap;
+
return hcd;
err_unmap:
diff --git a/drivers/usb/host/isp1760-if.c b/drivers/usb/host/isp1760-if.c
index 73fb2a3..c9db3fe 100644
--- a/drivers/usb/host/isp1760-if.c
+++ b/drivers/usb/host/isp1760-if.c
@@ -104,8 +104,8 @@
static u32 iolength;
static u32 pci_mem_phy0;
static u32 length;
-static u8 *chip_addr;
-static u8 *iobase;
+static u8 __iomem *chip_addr;
+static u8 __iomem *iobase;
static int __devinit isp1761_pci_probe(struct pci_dev *dev,
const struct pci_device_id *id)
@@ -256,7 +256,7 @@
static int __init isp1760_init(void)
{
- int ret;
+ int ret = -ENODEV;
init_kmem_once();
diff --git a/drivers/usb/host/ohci-sm501.c b/drivers/usb/host/ohci-sm501.c
index 77204f0..e899a77 100644
--- a/drivers/usb/host/ohci-sm501.c
+++ b/drivers/usb/host/ohci-sm501.c
@@ -90,7 +90,7 @@
struct device *dev = &pdev->dev;
struct resource *res, *mem;
int retval, irq;
- struct usb_hcd *hcd = 0;
+ struct usb_hcd *hcd = NULL;
irq = retval = platform_get_irq(pdev, 0);
if (retval < 0)
diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig
index a53db1d..001789c 100644
--- a/drivers/usb/misc/Kconfig
+++ b/drivers/usb/misc/Kconfig
@@ -269,3 +269,15 @@
See <http://www.linux-usb.org/usbtest/> for more information,
including sample test device firmware and "how to use it".
+config USB_ISIGHTFW
+ tristate "iSight firmware loading support"
+ depends on USB
+ select FW_LOADER
+ help
+ This driver loads firmware for USB Apple iSight cameras, allowing
+ them to be driven by the USB video class driver available at
+ http://linux-uvc.berlios.de
+
+ The firmware for this driver must be extracted from the MacOS
+ driver beforehand. Tools for doing so are available at
+ http://bersace03.free.fr
diff --git a/drivers/usb/misc/Makefile b/drivers/usb/misc/Makefile
index b68e6b7..aba091c 100644
--- a/drivers/usb/misc/Makefile
+++ b/drivers/usb/misc/Makefile
@@ -14,6 +14,7 @@
obj-$(CONFIG_USB_FTDI_ELAN) += ftdi-elan.o
obj-$(CONFIG_USB_IDMOUSE) += idmouse.o
obj-$(CONFIG_USB_IOWARRIOR) += iowarrior.o
+obj-$(CONFIG_USB_ISIGHTFW) += isight_firmware.o
obj-$(CONFIG_USB_LCD) += usblcd.o
obj-$(CONFIG_USB_LD) += ldusb.o
obj-$(CONFIG_USB_LED) += usbled.o
diff --git a/drivers/usb/misc/isight_firmware.c b/drivers/usb/misc/isight_firmware.c
new file mode 100644
index 0000000..9f30aa1
--- /dev/null
+++ b/drivers/usb/misc/isight_firmware.c
@@ -0,0 +1,140 @@
+/*
+ * Driver for loading USB isight firmware
+ *
+ * Copyright (C) 2008 Matthew Garrett <mjg@redhat.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation, version 2.
+ *
+ * The USB isight cameras in recent Apples are roughly compatible with the USB
+ * video class specification, and can be driven by uvcvideo. However, they
+ * need firmware to be loaded beforehand. After firmware loading, the device
+ * detaches from the USB bus and reattaches with a new device ID. It can then
+ * be claimed by the uvc driver.
+ *
+ * The firmware is non-free and must be extracted by the user. Tools to do this
+ * are available at http://bersace03.free.fr/ift/
+ *
+ * The isight firmware loading was reverse engineered by Johannes Berg
+ * <johannes@sipsolutions.de>, and this driver is based on code by Ronald
+ * Bultje <rbultje@ronald.bitfreak.net>
+ */
+
+#include <linux/usb.h>
+#include <linux/firmware.h>
+#include <linux/errno.h>
+#include <linux/module.h>
+
+static struct usb_device_id id_table[] = {
+ {USB_DEVICE(0x05ac, 0x8300)},
+ {},
+};
+
+MODULE_DEVICE_TABLE(usb, id_table);
+
+static int isight_firmware_load(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ struct usb_device *dev = interface_to_usbdev(intf);
+ int llen, len, req, ret = 0;
+ const struct firmware *firmware;
+ unsigned char *buf = kmalloc(50, GFP_KERNEL);
+ unsigned char data[4];
+ u8 *ptr;
+
+ if (!buf)
+ return -ENOMEM;
+
+ if (request_firmware(&firmware, "isight.fw", &dev->dev) != 0) {
+ printk(KERN_ERR "Unable to load isight firmware\n");
+ return -ENODEV;
+ }
+
+ ptr = firmware->data;
+
+ if (usb_control_msg
+ (dev, usb_sndctrlpipe(dev, 0), 0xa0, 0x40, 0xe600, 0, "\1", 1,
+ 300) != 1) {
+ printk(KERN_ERR
+ "Failed to initialise isight firmware loader\n");
+ ret = -ENODEV;
+ goto out;
+ }
+
+ while (ptr+4 <= firmware->data+firmware->size) {
+ memcpy(data, ptr, 4);
+ len = (data[0] << 8 | data[1]);
+ req = (data[2] << 8 | data[3]);
+ ptr += 4;
+
+ if (len == 0x8001)
+ break; /* success */
+ else if (len == 0)
+ continue;
+
+ for (; len > 0; req += 50) {
+ llen = min(len, 50);
+ len -= llen;
+ if (ptr+llen > firmware->data+firmware->size) {
+ printk(KERN_ERR
+ "Malformed isight firmware");
+ ret = -ENODEV;
+ goto out;
+ }
+ memcpy(buf, ptr, llen);
+
+ ptr += llen;
+
+ if (usb_control_msg
+ (dev, usb_sndctrlpipe(dev, 0), 0xa0, 0x40, req, 0,
+ buf, llen, 300) != llen) {
+ printk(KERN_ERR
+ "Failed to load isight firmware\n");
+ kfree(buf);
+ ret = -ENODEV;
+ goto out;
+ }
+
+ }
+ }
+
+ if (usb_control_msg
+ (dev, usb_sndctrlpipe(dev, 0), 0xa0, 0x40, 0xe600, 0, "\0", 1,
+ 300) != 1) {
+ printk(KERN_ERR "isight firmware loading completion failed\n");
+ ret = -ENODEV;
+ }
+
+out:
+ kfree(buf);
+ release_firmware(firmware);
+ return ret;
+}
+
+static void isight_firmware_disconnect(struct usb_interface *intf)
+{
+}
+
+static struct usb_driver isight_firmware_driver = {
+ .name = "isight_firmware",
+ .probe = isight_firmware_load,
+ .disconnect = isight_firmware_disconnect,
+ .id_table = id_table,
+};
+
+static int __init isight_firmware_init(void)
+{
+ return usb_register(&isight_firmware_driver);
+}
+
+static void __exit isight_firmware_exit(void)
+{
+ usb_deregister(&isight_firmware_driver);
+}
+
+module_init(isight_firmware_init);
+module_exit(isight_firmware_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Matthew Garrett <mjg@redhat.com>");
diff --git a/drivers/usb/misc/ldusb.c b/drivers/usb/misc/ldusb.c
index 7aafd53..189a9db 100644
--- a/drivers/usb/misc/ldusb.c
+++ b/drivers/usb/misc/ldusb.c
@@ -63,9 +63,6 @@
#define USB_DEVICE_ID_VERNIER_CYCLOPS 0x0004
#define USB_DEVICE_ID_VERNIER_LCSPEC 0x0006
-#define USB_VENDOR_ID_MICROCHIP 0x04d8
-#define USB_DEVICE_ID_PICDEM 0x000c
-
#ifdef CONFIG_USB_DYNAMIC_MINORS
#define USB_LD_MINOR_BASE 0
#else
@@ -92,7 +89,6 @@
{ USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_GOTEMP) },
{ USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_SKIP) },
{ USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_CYCLOPS) },
- { USB_DEVICE(USB_VENDOR_ID_MICROCHIP, USB_DEVICE_ID_PICDEM) },
{ USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_LCSPEC) },
{ } /* Terminating entry */
};
diff --git a/drivers/usb/misc/phidgetkit.c b/drivers/usb/misc/phidgetkit.c
index 24230c6..4cfa25b 100644
--- a/drivers/usb/misc/phidgetkit.c
+++ b/drivers/usb/misc/phidgetkit.c
@@ -595,14 +595,14 @@
} while(value);
kit->dev_no = bit;
- kit->dev = device_create(phidget_class, &kit->udev->dev, 0,
- "interfacekit%d", kit->dev_no);
+ kit->dev = device_create_drvdata(phidget_class, &kit->udev->dev,
+ MKDEV(0, 0), kit,
+ "interfacekit%d", kit->dev_no);
if (IS_ERR(kit->dev)) {
rc = PTR_ERR(kit->dev);
kit->dev = NULL;
goto out;
}
- dev_set_drvdata(kit->dev, kit);
if (usb_submit_urb(kit->irq, GFP_KERNEL)) {
rc = -EIO;
diff --git a/drivers/usb/misc/phidgetmotorcontrol.c b/drivers/usb/misc/phidgetmotorcontrol.c
index f0113c1..9b4696f 100644
--- a/drivers/usb/misc/phidgetmotorcontrol.c
+++ b/drivers/usb/misc/phidgetmotorcontrol.c
@@ -365,16 +365,15 @@
} while(value);
mc->dev_no = bit;
- mc->dev = device_create(phidget_class, &mc->udev->dev, 0,
- "motorcontrol%d", mc->dev_no);
+ mc->dev = device_create_drvdata(phidget_class, &mc->udev->dev,
+ MKDEV(0, 0), mc,
+ "motorcontrol%d", mc->dev_no);
if (IS_ERR(mc->dev)) {
rc = PTR_ERR(mc->dev);
mc->dev = NULL;
goto out;
}
- dev_set_drvdata(mc->dev, mc);
-
if (usb_submit_urb(mc->irq, GFP_KERNEL)) {
rc = -EIO;
goto out;
diff --git a/drivers/usb/misc/phidgetservo.c b/drivers/usb/misc/phidgetservo.c
index 7d590c0..1ca7ddb 100644
--- a/drivers/usb/misc/phidgetservo.c
+++ b/drivers/usb/misc/phidgetservo.c
@@ -275,14 +275,14 @@
} while (value);
dev->dev_no = bit;
- dev->dev = device_create(phidget_class, &dev->udev->dev, 0,
- "servo%d", dev->dev_no);
+ dev->dev = device_create_drvdata(phidget_class, &dev->udev->dev,
+ MKDEV(0, 0), dev,
+ "servo%d", dev->dev_no);
if (IS_ERR(dev->dev)) {
rc = PTR_ERR(dev->dev);
dev->dev = NULL;
goto out;
}
- dev_set_drvdata(dev->dev, dev);
servo_count = dev->type & SERVO_COUNT_QUAD ? 4 : 1;
diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c
index 742be3c..054dedd 100644
--- a/drivers/usb/misc/usbtest.c
+++ b/drivers/usb/misc/usbtest.c
@@ -856,6 +856,11 @@
struct urb *u;
struct usb_ctrlrequest req;
struct subcase *reqp;
+
+ /* sign of this variable means:
+ * -: tested code must return this (negative) error code
+ * +: tested code may return this (negative too) error code
+ */
int expected = 0;
/* requests here are mostly expected to succeed on any
diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index 2cffec8..9ba64cc 100644
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -447,6 +447,15 @@
To compile this driver as a module, choose M here: the
module will be called mos7840. If unsure, choose N.
+config USB_SERIAL_MOTOROLA
+ tristate "USB Motorola Phone modem driver"
+ ---help---
+ Say Y here if you want to use a Motorola phone with a USB
+ connector as a modem link.
+
+ To compile this driver as a module, choose M here: the
+ module will be called moto_modem. If unsure, choose N.
+
config USB_SERIAL_NAVMAN
tristate "USB Navman GPS device"
help
diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile
index 7568595..17a762a 100644
--- a/drivers/usb/serial/Makefile
+++ b/drivers/usb/serial/Makefile
@@ -39,6 +39,7 @@
obj-$(CONFIG_USB_SERIAL_MCT_U232) += mct_u232.o
obj-$(CONFIG_USB_SERIAL_MOS7720) += mos7720.o
obj-$(CONFIG_USB_SERIAL_MOS7840) += mos7840.o
+obj-$(CONFIG_USB_SERIAL_MOTOROLA) += moto_modem.o
obj-$(CONFIG_USB_SERIAL_NAVMAN) += navman.o
obj-$(CONFIG_USB_SERIAL_OMNINET) += omninet.o
obj-$(CONFIG_USB_SERIAL_OPTION) += option.o
diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c
index ba28fdc..1f7c86b 100644
--- a/drivers/usb/serial/ch341.c
+++ b/drivers/usb/serial/ch341.c
@@ -28,6 +28,7 @@
static struct usb_device_id id_table [] = {
{ USB_DEVICE(0x4348, 0x5523) },
+ { USB_DEVICE(0x1a86, 0x7523) },
{ },
};
MODULE_DEVICE_TABLE(usb, id_table);
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 5b349ec..5234e7a 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -174,8 +174,270 @@
{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_4_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_5_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_6_PID) },
- { USB_DEVICE(MTXORB_VK_VID, MTXORB_VK_PID),
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0100_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0101_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0102_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0103_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0104_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0105_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0106_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0107_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0108_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0109_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_010A_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_010B_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_010C_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_010D_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_010E_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_010F_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0110_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0111_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0112_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0113_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0114_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0115_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0116_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0117_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0118_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0119_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_011A_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_011B_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_011C_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_011D_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_011E_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_011F_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0120_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0121_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0122_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0123_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0124_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0125_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0126_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0127_PID),
.driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0128_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0129_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_012A_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_012B_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_012C_PID),
+ .driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_012D_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_012E_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_012F_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0130_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0131_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0132_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0133_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0134_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0135_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0136_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0137_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0138_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0139_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_013A_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_013B_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_013C_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_013D_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_013E_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_013F_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0140_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0141_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0142_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0143_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0144_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0145_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0146_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0147_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0148_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0149_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_014A_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_014B_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_014C_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_014D_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_014E_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_014F_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0150_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0151_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0152_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0153_PID),
+ .driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0154_PID),
+ .driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0155_PID),
+ .driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0156_PID),
+ .driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0157_PID),
+ .driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0158_PID),
+ .driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0159_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_015A_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_015B_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_015C_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_015D_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_015E_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_015F_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0160_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0161_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0162_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0163_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0164_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0165_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0166_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0167_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0168_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0169_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_016A_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_016B_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_016C_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_016D_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_016E_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_016F_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0170_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0171_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0172_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0173_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0174_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0175_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0176_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0177_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0178_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0179_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_017A_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_017B_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_017C_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_017D_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_017E_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_017F_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0180_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0181_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0182_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0183_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0184_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0185_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0186_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0187_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0188_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0189_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_018A_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_018B_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_018C_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_018D_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_018E_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_018F_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0190_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0191_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0192_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0193_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0194_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0195_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0196_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0197_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0198_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0199_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_019A_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_019B_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_019C_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_019D_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_019E_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_019F_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01A0_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01A1_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01A2_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01A3_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01A4_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01A5_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01A6_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01A7_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01A8_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01A9_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01AA_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01AB_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01AC_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01AD_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01AE_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01AF_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01B0_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01B1_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01B2_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01B3_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01B4_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01B5_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01B6_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01B7_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01B8_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01B9_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01BA_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01BB_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01BC_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01BD_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01BE_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01BF_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01C0_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01C1_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01C2_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01C3_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01C4_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01C5_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01C6_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01C7_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01C8_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01C9_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01CA_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01CB_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01CC_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01CD_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01CE_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01CF_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01D0_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01D1_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01D2_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01D3_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01D4_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01D5_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01D6_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01D7_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01D8_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01D9_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01DA_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01DB_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01DC_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01DD_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01DE_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01DF_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01E0_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01E1_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01E2_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01E3_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01E4_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01E5_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01E6_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01E7_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01E8_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01E9_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01EA_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01EB_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01EC_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01ED_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01EE_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01EF_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01F0_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01F1_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01F2_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01F3_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01F4_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01F5_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01F6_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01F7_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01F8_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01F9_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01FA_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01FB_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01FC_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01FD_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01FE_PID) },
+ { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01FF_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_PERLE_ULTRAPORT_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_PIEGROUP_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_TNC_X_PID) },
@@ -374,6 +636,7 @@
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(FTDI_VID, FTDI_OOCDLINK_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+ { USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_USB60F) },
{ }, /* Optional parameter entry */
{ } /* Terminating entry */
};
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index 504edf8..06e0eca 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -114,11 +114,268 @@
#define FTDI_OOCDLINK_PID 0xbaf8 /* Amontec JTAGkey */
/*
- * The following are the values for the Matrix Orbital VK204-25-USB
- * display, which use the FT232RL.
+ * The following are the values for the Matrix Orbital FTDI Range
+ * Anything in this range will use an FT232RL.
*/
-#define MTXORB_VK_VID 0x1b3d
-#define MTXORB_VK_PID 0x0158
+#define MTXORB_VID 0x1B3D
+#define MTXORB_FTDI_RANGE_0100_PID 0x0100
+#define MTXORB_FTDI_RANGE_0101_PID 0x0101
+#define MTXORB_FTDI_RANGE_0102_PID 0x0102
+#define MTXORB_FTDI_RANGE_0103_PID 0x0103
+#define MTXORB_FTDI_RANGE_0104_PID 0x0104
+#define MTXORB_FTDI_RANGE_0105_PID 0x0105
+#define MTXORB_FTDI_RANGE_0106_PID 0x0106
+#define MTXORB_FTDI_RANGE_0107_PID 0x0107
+#define MTXORB_FTDI_RANGE_0108_PID 0x0108
+#define MTXORB_FTDI_RANGE_0109_PID 0x0109
+#define MTXORB_FTDI_RANGE_010A_PID 0x010A
+#define MTXORB_FTDI_RANGE_010B_PID 0x010B
+#define MTXORB_FTDI_RANGE_010C_PID 0x010C
+#define MTXORB_FTDI_RANGE_010D_PID 0x010D
+#define MTXORB_FTDI_RANGE_010E_PID 0x010E
+#define MTXORB_FTDI_RANGE_010F_PID 0x010F
+#define MTXORB_FTDI_RANGE_0110_PID 0x0110
+#define MTXORB_FTDI_RANGE_0111_PID 0x0111
+#define MTXORB_FTDI_RANGE_0112_PID 0x0112
+#define MTXORB_FTDI_RANGE_0113_PID 0x0113
+#define MTXORB_FTDI_RANGE_0114_PID 0x0114
+#define MTXORB_FTDI_RANGE_0115_PID 0x0115
+#define MTXORB_FTDI_RANGE_0116_PID 0x0116
+#define MTXORB_FTDI_RANGE_0117_PID 0x0117
+#define MTXORB_FTDI_RANGE_0118_PID 0x0118
+#define MTXORB_FTDI_RANGE_0119_PID 0x0119
+#define MTXORB_FTDI_RANGE_011A_PID 0x011A
+#define MTXORB_FTDI_RANGE_011B_PID 0x011B
+#define MTXORB_FTDI_RANGE_011C_PID 0x011C
+#define MTXORB_FTDI_RANGE_011D_PID 0x011D
+#define MTXORB_FTDI_RANGE_011E_PID 0x011E
+#define MTXORB_FTDI_RANGE_011F_PID 0x011F
+#define MTXORB_FTDI_RANGE_0120_PID 0x0120
+#define MTXORB_FTDI_RANGE_0121_PID 0x0121
+#define MTXORB_FTDI_RANGE_0122_PID 0x0122
+#define MTXORB_FTDI_RANGE_0123_PID 0x0123
+#define MTXORB_FTDI_RANGE_0124_PID 0x0124
+#define MTXORB_FTDI_RANGE_0125_PID 0x0125
+#define MTXORB_FTDI_RANGE_0126_PID 0x0126
+#define MTXORB_FTDI_RANGE_0127_PID 0x0127
+#define MTXORB_FTDI_RANGE_0128_PID 0x0128
+#define MTXORB_FTDI_RANGE_0129_PID 0x0129
+#define MTXORB_FTDI_RANGE_012A_PID 0x012A
+#define MTXORB_FTDI_RANGE_012B_PID 0x012B
+#define MTXORB_FTDI_RANGE_012C_PID 0x012C
+#define MTXORB_FTDI_RANGE_012D_PID 0x012D
+#define MTXORB_FTDI_RANGE_012E_PID 0x012E
+#define MTXORB_FTDI_RANGE_012F_PID 0x012F
+#define MTXORB_FTDI_RANGE_0130_PID 0x0130
+#define MTXORB_FTDI_RANGE_0131_PID 0x0131
+#define MTXORB_FTDI_RANGE_0132_PID 0x0132
+#define MTXORB_FTDI_RANGE_0133_PID 0x0133
+#define MTXORB_FTDI_RANGE_0134_PID 0x0134
+#define MTXORB_FTDI_RANGE_0135_PID 0x0135
+#define MTXORB_FTDI_RANGE_0136_PID 0x0136
+#define MTXORB_FTDI_RANGE_0137_PID 0x0137
+#define MTXORB_FTDI_RANGE_0138_PID 0x0138
+#define MTXORB_FTDI_RANGE_0139_PID 0x0139
+#define MTXORB_FTDI_RANGE_013A_PID 0x013A
+#define MTXORB_FTDI_RANGE_013B_PID 0x013B
+#define MTXORB_FTDI_RANGE_013C_PID 0x013C
+#define MTXORB_FTDI_RANGE_013D_PID 0x013D
+#define MTXORB_FTDI_RANGE_013E_PID 0x013E
+#define MTXORB_FTDI_RANGE_013F_PID 0x013F
+#define MTXORB_FTDI_RANGE_0140_PID 0x0140
+#define MTXORB_FTDI_RANGE_0141_PID 0x0141
+#define MTXORB_FTDI_RANGE_0142_PID 0x0142
+#define MTXORB_FTDI_RANGE_0143_PID 0x0143
+#define MTXORB_FTDI_RANGE_0144_PID 0x0144
+#define MTXORB_FTDI_RANGE_0145_PID 0x0145
+#define MTXORB_FTDI_RANGE_0146_PID 0x0146
+#define MTXORB_FTDI_RANGE_0147_PID 0x0147
+#define MTXORB_FTDI_RANGE_0148_PID 0x0148
+#define MTXORB_FTDI_RANGE_0149_PID 0x0149
+#define MTXORB_FTDI_RANGE_014A_PID 0x014A
+#define MTXORB_FTDI_RANGE_014B_PID 0x014B
+#define MTXORB_FTDI_RANGE_014C_PID 0x014C
+#define MTXORB_FTDI_RANGE_014D_PID 0x014D
+#define MTXORB_FTDI_RANGE_014E_PID 0x014E
+#define MTXORB_FTDI_RANGE_014F_PID 0x014F
+#define MTXORB_FTDI_RANGE_0150_PID 0x0150
+#define MTXORB_FTDI_RANGE_0151_PID 0x0151
+#define MTXORB_FTDI_RANGE_0152_PID 0x0152
+#define MTXORB_FTDI_RANGE_0153_PID 0x0153
+#define MTXORB_FTDI_RANGE_0154_PID 0x0154
+#define MTXORB_FTDI_RANGE_0155_PID 0x0155
+#define MTXORB_FTDI_RANGE_0156_PID 0x0156
+#define MTXORB_FTDI_RANGE_0157_PID 0x0157
+#define MTXORB_FTDI_RANGE_0158_PID 0x0158
+#define MTXORB_FTDI_RANGE_0159_PID 0x0159
+#define MTXORB_FTDI_RANGE_015A_PID 0x015A
+#define MTXORB_FTDI_RANGE_015B_PID 0x015B
+#define MTXORB_FTDI_RANGE_015C_PID 0x015C
+#define MTXORB_FTDI_RANGE_015D_PID 0x015D
+#define MTXORB_FTDI_RANGE_015E_PID 0x015E
+#define MTXORB_FTDI_RANGE_015F_PID 0x015F
+#define MTXORB_FTDI_RANGE_0160_PID 0x0160
+#define MTXORB_FTDI_RANGE_0161_PID 0x0161
+#define MTXORB_FTDI_RANGE_0162_PID 0x0162
+#define MTXORB_FTDI_RANGE_0163_PID 0x0163
+#define MTXORB_FTDI_RANGE_0164_PID 0x0164
+#define MTXORB_FTDI_RANGE_0165_PID 0x0165
+#define MTXORB_FTDI_RANGE_0166_PID 0x0166
+#define MTXORB_FTDI_RANGE_0167_PID 0x0167
+#define MTXORB_FTDI_RANGE_0168_PID 0x0168
+#define MTXORB_FTDI_RANGE_0169_PID 0x0169
+#define MTXORB_FTDI_RANGE_016A_PID 0x016A
+#define MTXORB_FTDI_RANGE_016B_PID 0x016B
+#define MTXORB_FTDI_RANGE_016C_PID 0x016C
+#define MTXORB_FTDI_RANGE_016D_PID 0x016D
+#define MTXORB_FTDI_RANGE_016E_PID 0x016E
+#define MTXORB_FTDI_RANGE_016F_PID 0x016F
+#define MTXORB_FTDI_RANGE_0170_PID 0x0170
+#define MTXORB_FTDI_RANGE_0171_PID 0x0171
+#define MTXORB_FTDI_RANGE_0172_PID 0x0172
+#define MTXORB_FTDI_RANGE_0173_PID 0x0173
+#define MTXORB_FTDI_RANGE_0174_PID 0x0174
+#define MTXORB_FTDI_RANGE_0175_PID 0x0175
+#define MTXORB_FTDI_RANGE_0176_PID 0x0176
+#define MTXORB_FTDI_RANGE_0177_PID 0x0177
+#define MTXORB_FTDI_RANGE_0178_PID 0x0178
+#define MTXORB_FTDI_RANGE_0179_PID 0x0179
+#define MTXORB_FTDI_RANGE_017A_PID 0x017A
+#define MTXORB_FTDI_RANGE_017B_PID 0x017B
+#define MTXORB_FTDI_RANGE_017C_PID 0x017C
+#define MTXORB_FTDI_RANGE_017D_PID 0x017D
+#define MTXORB_FTDI_RANGE_017E_PID 0x017E
+#define MTXORB_FTDI_RANGE_017F_PID 0x017F
+#define MTXORB_FTDI_RANGE_0180_PID 0x0180
+#define MTXORB_FTDI_RANGE_0181_PID 0x0181
+#define MTXORB_FTDI_RANGE_0182_PID 0x0182
+#define MTXORB_FTDI_RANGE_0183_PID 0x0183
+#define MTXORB_FTDI_RANGE_0184_PID 0x0184
+#define MTXORB_FTDI_RANGE_0185_PID 0x0185
+#define MTXORB_FTDI_RANGE_0186_PID 0x0186
+#define MTXORB_FTDI_RANGE_0187_PID 0x0187
+#define MTXORB_FTDI_RANGE_0188_PID 0x0188
+#define MTXORB_FTDI_RANGE_0189_PID 0x0189
+#define MTXORB_FTDI_RANGE_018A_PID 0x018A
+#define MTXORB_FTDI_RANGE_018B_PID 0x018B
+#define MTXORB_FTDI_RANGE_018C_PID 0x018C
+#define MTXORB_FTDI_RANGE_018D_PID 0x018D
+#define MTXORB_FTDI_RANGE_018E_PID 0x018E
+#define MTXORB_FTDI_RANGE_018F_PID 0x018F
+#define MTXORB_FTDI_RANGE_0190_PID 0x0190
+#define MTXORB_FTDI_RANGE_0191_PID 0x0191
+#define MTXORB_FTDI_RANGE_0192_PID 0x0192
+#define MTXORB_FTDI_RANGE_0193_PID 0x0193
+#define MTXORB_FTDI_RANGE_0194_PID 0x0194
+#define MTXORB_FTDI_RANGE_0195_PID 0x0195
+#define MTXORB_FTDI_RANGE_0196_PID 0x0196
+#define MTXORB_FTDI_RANGE_0197_PID 0x0197
+#define MTXORB_FTDI_RANGE_0198_PID 0x0198
+#define MTXORB_FTDI_RANGE_0199_PID 0x0199
+#define MTXORB_FTDI_RANGE_019A_PID 0x019A
+#define MTXORB_FTDI_RANGE_019B_PID 0x019B
+#define MTXORB_FTDI_RANGE_019C_PID 0x019C
+#define MTXORB_FTDI_RANGE_019D_PID 0x019D
+#define MTXORB_FTDI_RANGE_019E_PID 0x019E
+#define MTXORB_FTDI_RANGE_019F_PID 0x019F
+#define MTXORB_FTDI_RANGE_01A0_PID 0x01A0
+#define MTXORB_FTDI_RANGE_01A1_PID 0x01A1
+#define MTXORB_FTDI_RANGE_01A2_PID 0x01A2
+#define MTXORB_FTDI_RANGE_01A3_PID 0x01A3
+#define MTXORB_FTDI_RANGE_01A4_PID 0x01A4
+#define MTXORB_FTDI_RANGE_01A5_PID 0x01A5
+#define MTXORB_FTDI_RANGE_01A6_PID 0x01A6
+#define MTXORB_FTDI_RANGE_01A7_PID 0x01A7
+#define MTXORB_FTDI_RANGE_01A8_PID 0x01A8
+#define MTXORB_FTDI_RANGE_01A9_PID 0x01A9
+#define MTXORB_FTDI_RANGE_01AA_PID 0x01AA
+#define MTXORB_FTDI_RANGE_01AB_PID 0x01AB
+#define MTXORB_FTDI_RANGE_01AC_PID 0x01AC
+#define MTXORB_FTDI_RANGE_01AD_PID 0x01AD
+#define MTXORB_FTDI_RANGE_01AE_PID 0x01AE
+#define MTXORB_FTDI_RANGE_01AF_PID 0x01AF
+#define MTXORB_FTDI_RANGE_01B0_PID 0x01B0
+#define MTXORB_FTDI_RANGE_01B1_PID 0x01B1
+#define MTXORB_FTDI_RANGE_01B2_PID 0x01B2
+#define MTXORB_FTDI_RANGE_01B3_PID 0x01B3
+#define MTXORB_FTDI_RANGE_01B4_PID 0x01B4
+#define MTXORB_FTDI_RANGE_01B5_PID 0x01B5
+#define MTXORB_FTDI_RANGE_01B6_PID 0x01B6
+#define MTXORB_FTDI_RANGE_01B7_PID 0x01B7
+#define MTXORB_FTDI_RANGE_01B8_PID 0x01B8
+#define MTXORB_FTDI_RANGE_01B9_PID 0x01B9
+#define MTXORB_FTDI_RANGE_01BA_PID 0x01BA
+#define MTXORB_FTDI_RANGE_01BB_PID 0x01BB
+#define MTXORB_FTDI_RANGE_01BC_PID 0x01BC
+#define MTXORB_FTDI_RANGE_01BD_PID 0x01BD
+#define MTXORB_FTDI_RANGE_01BE_PID 0x01BE
+#define MTXORB_FTDI_RANGE_01BF_PID 0x01BF
+#define MTXORB_FTDI_RANGE_01C0_PID 0x01C0
+#define MTXORB_FTDI_RANGE_01C1_PID 0x01C1
+#define MTXORB_FTDI_RANGE_01C2_PID 0x01C2
+#define MTXORB_FTDI_RANGE_01C3_PID 0x01C3
+#define MTXORB_FTDI_RANGE_01C4_PID 0x01C4
+#define MTXORB_FTDI_RANGE_01C5_PID 0x01C5
+#define MTXORB_FTDI_RANGE_01C6_PID 0x01C6
+#define MTXORB_FTDI_RANGE_01C7_PID 0x01C7
+#define MTXORB_FTDI_RANGE_01C8_PID 0x01C8
+#define MTXORB_FTDI_RANGE_01C9_PID 0x01C9
+#define MTXORB_FTDI_RANGE_01CA_PID 0x01CA
+#define MTXORB_FTDI_RANGE_01CB_PID 0x01CB
+#define MTXORB_FTDI_RANGE_01CC_PID 0x01CC
+#define MTXORB_FTDI_RANGE_01CD_PID 0x01CD
+#define MTXORB_FTDI_RANGE_01CE_PID 0x01CE
+#define MTXORB_FTDI_RANGE_01CF_PID 0x01CF
+#define MTXORB_FTDI_RANGE_01D0_PID 0x01D0
+#define MTXORB_FTDI_RANGE_01D1_PID 0x01D1
+#define MTXORB_FTDI_RANGE_01D2_PID 0x01D2
+#define MTXORB_FTDI_RANGE_01D3_PID 0x01D3
+#define MTXORB_FTDI_RANGE_01D4_PID 0x01D4
+#define MTXORB_FTDI_RANGE_01D5_PID 0x01D5
+#define MTXORB_FTDI_RANGE_01D6_PID 0x01D6
+#define MTXORB_FTDI_RANGE_01D7_PID 0x01D7
+#define MTXORB_FTDI_RANGE_01D8_PID 0x01D8
+#define MTXORB_FTDI_RANGE_01D9_PID 0x01D9
+#define MTXORB_FTDI_RANGE_01DA_PID 0x01DA
+#define MTXORB_FTDI_RANGE_01DB_PID 0x01DB
+#define MTXORB_FTDI_RANGE_01DC_PID 0x01DC
+#define MTXORB_FTDI_RANGE_01DD_PID 0x01DD
+#define MTXORB_FTDI_RANGE_01DE_PID 0x01DE
+#define MTXORB_FTDI_RANGE_01DF_PID 0x01DF
+#define MTXORB_FTDI_RANGE_01E0_PID 0x01E0
+#define MTXORB_FTDI_RANGE_01E1_PID 0x01E1
+#define MTXORB_FTDI_RANGE_01E2_PID 0x01E2
+#define MTXORB_FTDI_RANGE_01E3_PID 0x01E3
+#define MTXORB_FTDI_RANGE_01E4_PID 0x01E4
+#define MTXORB_FTDI_RANGE_01E5_PID 0x01E5
+#define MTXORB_FTDI_RANGE_01E6_PID 0x01E6
+#define MTXORB_FTDI_RANGE_01E7_PID 0x01E7
+#define MTXORB_FTDI_RANGE_01E8_PID 0x01E8
+#define MTXORB_FTDI_RANGE_01E9_PID 0x01E9
+#define MTXORB_FTDI_RANGE_01EA_PID 0x01EA
+#define MTXORB_FTDI_RANGE_01EB_PID 0x01EB
+#define MTXORB_FTDI_RANGE_01EC_PID 0x01EC
+#define MTXORB_FTDI_RANGE_01ED_PID 0x01ED
+#define MTXORB_FTDI_RANGE_01EE_PID 0x01EE
+#define MTXORB_FTDI_RANGE_01EF_PID 0x01EF
+#define MTXORB_FTDI_RANGE_01F0_PID 0x01F0
+#define MTXORB_FTDI_RANGE_01F1_PID 0x01F1
+#define MTXORB_FTDI_RANGE_01F2_PID 0x01F2
+#define MTXORB_FTDI_RANGE_01F3_PID 0x01F3
+#define MTXORB_FTDI_RANGE_01F4_PID 0x01F4
+#define MTXORB_FTDI_RANGE_01F5_PID 0x01F5
+#define MTXORB_FTDI_RANGE_01F6_PID 0x01F6
+#define MTXORB_FTDI_RANGE_01F7_PID 0x01F7
+#define MTXORB_FTDI_RANGE_01F8_PID 0x01F8
+#define MTXORB_FTDI_RANGE_01F9_PID 0x01F9
+#define MTXORB_FTDI_RANGE_01FA_PID 0x01FA
+#define MTXORB_FTDI_RANGE_01FB_PID 0x01FB
+#define MTXORB_FTDI_RANGE_01FC_PID 0x01FC
+#define MTXORB_FTDI_RANGE_01FD_PID 0x01FD
+#define MTXORB_FTDI_RANGE_01FE_PID 0x01FE
+#define MTXORB_FTDI_RANGE_01FF_PID 0x01FF
+
+
/* Interbiometrics USB I/O Board */
/* Developed for Interbiometrics by Rudolf Gugler */
@@ -592,6 +849,12 @@
#define FIC_NEO1973_DEBUG_PID 0x5118
/*
+ * RATOC REX-USB60F
+ */
+#define RATOC_VENDOR_ID 0x0584
+#define RATOC_PRODUCT_ID_USB60F 0xb020
+
+/*
* BmRequestType: 1100 0000b
* bRequest: FTDI_E2_READ
* wValue: 0
diff --git a/drivers/usb/serial/moto_modem.c b/drivers/usb/serial/moto_modem.c
new file mode 100644
index 0000000..2e8e0546
--- /dev/null
+++ b/drivers/usb/serial/moto_modem.c
@@ -0,0 +1,70 @@
+/*
+ * Motorola USB Phone driver
+ *
+ * Copyright (C) 2008 Greg Kroah-Hartman <greg@kroah.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * {sigh}
+ * Mororola should be using the CDC ACM USB spec, but instead
+ * they try to just "do their own thing"... This driver should handle a
+ * few phones in which a basic "dumb serial connection" is needed to be
+ * able to get a connection through to them.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/tty.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+
+static struct usb_device_id id_table [] = {
+ { USB_DEVICE(0x05c6, 0x3197) }, /* unknown Motorola phone */
+ { USB_DEVICE(0x0c44, 0x0022) }, /* unknown Mororola phone */
+ { USB_DEVICE(0x22b8, 0x2a64) }, /* Motorola KRZR K1m */
+ { },
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+static struct usb_driver moto_driver = {
+ .name = "moto-modem",
+ .probe = usb_serial_probe,
+ .disconnect = usb_serial_disconnect,
+ .id_table = id_table,
+ .no_dynamic_id = 1,
+};
+
+static struct usb_serial_driver moto_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "moto-modem",
+ },
+ .id_table = id_table,
+ .num_ports = 1,
+};
+
+static int __init moto_init(void)
+{
+ int retval;
+
+ retval = usb_serial_register(&moto_device);
+ if (retval)
+ return retval;
+ retval = usb_register(&moto_driver);
+ if (retval)
+ usb_serial_deregister(&moto_device);
+ return retval;
+}
+
+static void __exit moto_exit(void)
+{
+ usb_deregister(&moto_driver);
+ usb_serial_deregister(&moto_device);
+}
+
+module_init(moto_init);
+module_exit(moto_exit);
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index e4be2d4..43cfde8 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -154,8 +154,6 @@
#define NOVATELWIRELESS_PRODUCT_MC727 0x4100
#define NOVATELWIRELESS_PRODUCT_MC950D 0x4400
-#define NOVATELWIRELESS_PRODUCT_U727 0x5010
-
/* FUTURE NOVATEL PRODUCTS */
#define NOVATELWIRELESS_PRODUCT_EVDO_1 0x6000
#define NOVATELWIRELESS_PRODUCT_HSPA_1 0x7000
@@ -184,6 +182,10 @@
#define AXESSTEL_VENDOR_ID 0x1726
#define AXESSTEL_PRODUCT_MV110H 0x1000
+#define ONDA_VENDOR_ID 0x19d2
+#define ONDA_PRODUCT_MSA501HS 0x0001
+#define ONDA_PRODUCT_ET502HS 0x0002
+
#define BANDRICH_VENDOR_ID 0x1A8D
#define BANDRICH_PRODUCT_C100_1 0x1002
#define BANDRICH_PRODUCT_C100_2 0x1003
@@ -195,6 +197,9 @@
#define MAXON_VENDOR_ID 0x16d8
+#define TELIT_VENDOR_ID 0x1bc7
+#define TELIT_PRODUCT_UC864E 0x1003
+
static struct usb_device_id option_ids[] = {
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) },
@@ -231,25 +236,25 @@
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_NETWORK_EX) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_KOI_MODEM) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_KOI_NETWORK) },
- { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600) },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220, 0xff, 0xff, 0xff) },
{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220BIS, 0xff, 0xff, 0xff) },
- { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1401) },
- { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1403) },
- { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1405) },
- { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1406) },
- { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1408) },
- { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1409) },
- { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1410) },
- { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1411) },
- { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1412) },
- { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1413) },
- { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1414) },
- { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1415) },
- { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1416) },
- { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1417) },
- { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1418) },
- { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1419) },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1401, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1403, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1405, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1406, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1408, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1409, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1410, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1411, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1412, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1413, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1414, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1415, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1416, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1417, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1418, 0xff, 0xff, 0xff) },
+ { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1419, 0xff, 0xff, 0xff) },
{ USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_9508) },
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V640) }, /* Novatel Merlin V640/XV620 */
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V620) }, /* Novatel Merlin V620/S620 */
@@ -269,7 +274,6 @@
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EU870D) }, /* Novatel EU850D/EU860D/EU870D */
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC950D) }, /* Novatel MC930D/MC950D */
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC727) }, /* Novatel MC727/U727/USB727 */
- { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_U727) }, /* Novatel U727 */
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EVDO_1) }, /* Novatel EVDO product */
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_1) }, /* Novatel HSPA product */
{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EMBEDDED_1) }, /* Novatel Embedded product */
@@ -293,14 +297,18 @@
{ USB_DEVICE(DELL_VENDOR_ID, 0x8133) }, /* Dell Wireless 5720 == Novatel EV620 CDMA/EV-DO */
{ USB_DEVICE(DELL_VENDOR_ID, 0x8136) }, /* Dell Wireless HSDPA 5520 == Novatel Expedite EU860D */
{ USB_DEVICE(DELL_VENDOR_ID, 0x8137) }, /* Dell Wireless HSDPA 5520 */
+ { USB_DEVICE(DELL_VENDOR_ID, 0x8138) }, /* Dell Wireless 5520 Voda I Mobile Broadband (3G HSDPA) Minicard */
{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_E100A) },
{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_500A) },
{ USB_DEVICE(AXESSTEL_VENDOR_ID, AXESSTEL_PRODUCT_MV110H) },
+ { USB_DEVICE(ONDA_VENDOR_ID, ONDA_PRODUCT_MSA501HS) },
+ { USB_DEVICE(ONDA_VENDOR_ID, ONDA_PRODUCT_ET502HS) },
{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_1) },
{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_2) },
{ USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC680) },
{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */
{ USB_DEVICE(MAXON_VENDOR_ID, 0x6280) }, /* BP3-USB & BP3-EXT HSDPA */
+ { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864E) },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, option_ids);
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index c605fb6..103195a 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -56,6 +56,7 @@
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_RSAQ3) },
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_PHAROS) },
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_ALDIGA) },
+ { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_MMX) },
{ USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID) },
{ USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID_RSAQ5) },
{ USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID) },
@@ -66,7 +67,6 @@
{ USB_DEVICE(ITEGNO_VENDOR_ID, ITEGNO_PRODUCT_ID_2080) },
{ USB_DEVICE(MA620_VENDOR_ID, MA620_PRODUCT_ID) },
{ USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID) },
- { USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_USB60F) },
{ USB_DEVICE(TRIPP_VENDOR_ID, TRIPP_PRODUCT_ID) },
{ USB_DEVICE(RADIOSHACK_VENDOR_ID, RADIOSHACK_PRODUCT_ID) },
{ USB_DEVICE(DCU10_VENDOR_ID, DCU10_PRODUCT_ID) },
diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h
index 10cf872..cff160a 100644
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -14,6 +14,7 @@
#define PL2303_PRODUCT_ID_PHAROS 0xaaa0
#define PL2303_PRODUCT_ID_RSAQ3 0xaaa2
#define PL2303_PRODUCT_ID_ALDIGA 0x0611
+#define PL2303_PRODUCT_ID_MMX 0x0612
#define ATEN_VENDOR_ID 0x0557
#define ATEN_VENDOR_ID2 0x0547
@@ -36,7 +37,6 @@
#define RATOC_VENDOR_ID 0x0584
#define RATOC_PRODUCT_ID 0xb000
-#define RATOC_PRODUCT_ID_USB60F 0xb020
#define TRIPP_VENDOR_ID 0x2478
#define TRIPP_PRODUCT_ID 0x2008
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index a0ed889..45fe366 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -401,6 +401,14 @@
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
+#ifdef CONFIG_USB_STORAGE_CYPRESS_ATACB
+UNUSUAL_DEV( 0x04b4, 0x6830, 0x0000, 0x9999,
+ "Cypress",
+ "Cypress AT2LP",
+ US_SC_CYP_ATACB, US_PR_DEVICE, NULL,
+ 0),
+#endif
+
/* Reported by Simon Levitt <simon@whattf.com>
* This entry needs Sub and Proto fields */
UNUSUAL_DEV( 0x04b8, 0x0601, 0x0100, 0x0100,
@@ -539,17 +547,6 @@
"CD-RW Device",
US_SC_8020, US_PR_CB, NULL, 0),
-/* Entry and supporting patch by Theodore Kilgore <kilgota@auburn.edu>.
- * Device uses standards-violating 32-byte Bulk Command Block Wrappers and
- * reports itself as "Proprietary SCSI Bulk." Cf. device entry 0x084d:0x0011.
- */
-
-UNUSUAL_DEV( 0x04fc, 0x80c2, 0x0100, 0x0100,
- "Kobian Mercury",
- "Binocam DCB-132",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
- US_FL_BULK32),
-
#ifdef CONFIG_USB_STORAGE_USBAT
UNUSUAL_DEV( 0x04e6, 0x1010, 0x0000, 0x9999,
"Shuttle/SCM",
@@ -565,6 +562,16 @@
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_MAX_SECTORS_64),
+/* Entry and supporting patch by Theodore Kilgore <kilgota@auburn.edu>.
+ * Device uses standards-violating 32-byte Bulk Command Block Wrappers and
+ * reports itself as "Proprietary SCSI Bulk." Cf. device entry 0x084d:0x0011.
+ */
+UNUSUAL_DEV( 0x04fc, 0x80c2, 0x0100, 0x0100,
+ "Kobian Mercury",
+ "Binocam DCB-132",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_BULK32),
+
/* Reported by Bob Sass <rls@vectordb.com> -- only rev 1.33 tested */
UNUSUAL_DEV( 0x050d, 0x0115, 0x0133, 0x0133,
"Belkin",
@@ -1304,6 +1311,16 @@
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_IGNORE_DEVICE ),
+/* Reported by F. Aben <f.aben@option.com>
+ * This device (wrongly) has a vendor-specific device descriptor.
+ * The entry is needed so usb-storage can bind to it's mass-storage
+ * interface as an interface driver */
+UNUSUAL_DEV( 0x0af0, 0x7401, 0x0000, 0x0000,
+ "Option",
+ "GI 0401 SD-Card",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ 0 ),
+
#ifdef CONFIG_USB_STORAGE_ISD200
UNUSUAL_DEV( 0x0bf6, 0xa001, 0x0100, 0x0110,
"ATI",
@@ -1361,13 +1378,6 @@
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_INQUIRY),
-/* Reported by Rohan Hart <rohan.hart17@gmail.com> */
-UNUSUAL_DEV( 0x2770, 0x915d, 0x0010, 0x0010,
- "INTOVA",
- "Pixtreme",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
- US_FL_FIX_CAPACITY ),
-
/*
* Entry for Jenoptik JD 5200z3
*
@@ -1512,7 +1522,7 @@
"Sony Ericsson",
"M600i",
US_SC_DEVICE, US_PR_DEVICE, NULL,
- US_FL_FIX_CAPACITY ),
+ US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ),
/* Reported by Kevin Cernekee <kpc-usbdev@gelato.uiuc.edu>
* Tested on hardware version 1.10.
@@ -1684,6 +1694,16 @@
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
+/* Reported by Mauro Andreolini <andreoli@weblab.ing.unimo.it>
+ * This entry is needed to bypass the ZeroCD mechanism
+ * and to properly load as a modem device.
+ */
+UNUSUAL_DEV( 0x19d2, 0x2000, 0x0000, 0x0000,
+ "Onda ET502HS",
+ "USB MMC Storage",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_IGNORE_DEVICE),
+
/* patch submitted by Davide Perini <perini.davide@dpsoftware.org>
* and Renato Perini <rperini@email.it>
*/
@@ -1696,10 +1716,12 @@
/*
* Patch by Pete Zaitcev <zaitcev@redhat.com>
* Report by Mark Patton. Red Hat bz#208928.
+ * Added support for rev 0x0002 (Motorola ROKR W5)
+ * by Javier Smaldone <javier@smaldone.com.ar>
*/
-UNUSUAL_DEV( 0x22b8, 0x4810, 0x0001, 0x0001,
+UNUSUAL_DEV( 0x22b8, 0x4810, 0x0001, 0x0002,
"Motorola",
- "RAZR V3i",
+ "RAZR V3i/ROKR W5",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY),
@@ -1721,6 +1743,13 @@
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_GO_SLOW ),
+/* Reported by Rohan Hart <rohan.hart17@gmail.com> */
+UNUSUAL_DEV( 0x2770, 0x915d, 0x0010, 0x0010,
+ "INTOVA",
+ "Pixtreme",
+ US_SC_DEVICE, US_PR_DEVICE, NULL,
+ US_FL_FIX_CAPACITY ),
+
/*
* David Härdeman <david@2gen.com>
* The key makes the SCSI stack print confusing (but harmless) messages
@@ -1745,14 +1774,6 @@
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_CAPACITY_HEURISTICS),
-#ifdef CONFIG_USB_STORAGE_CYPRESS_ATACB
-UNUSUAL_DEV( 0x04b4, 0x6830, 0x0000, 0x9999,
- "Cypress",
- "Cypress AT2LP",
- US_SC_CYP_ATACB, US_PR_BULK, NULL,
- 0),
-#endif
-
/* Control/Bulk transport for all SubClass values */
USUAL_DEV(US_SC_RBC, US_PR_CB, USB_US_TYPE_STOR),
USUAL_DEV(US_SC_8020, US_PR_CB, USB_US_TYPE_STOR),
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index bb1dada..002b61b 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -171,7 +171,6 @@
config FB_DEFERRED_IO
bool
depends on FB
- default y
config FB_METRONOME
tristate
@@ -628,11 +627,9 @@
select FB_CFB_IMAGEBLIT
select FB_MACMODES
-# bool ' Apple DAFB display support' CONFIG_FB_DAFB
config FB_HP300
bool
- depends on (FB = y) && HP300
- select FB_CFB_FILLRECT
+ depends on (FB = y) && DIO
select FB_CFB_IMAGEBLIT
default y
diff --git a/drivers/video/amifb.c b/drivers/video/amifb.c
index e6492c1..05a328c 100644
--- a/drivers/video/amifb.c
+++ b/drivers/video/amifb.c
@@ -2261,7 +2261,7 @@
amifb_setup(option);
#endif
if (!MACH_IS_AMIGA || !AMIGAHW_PRESENT(AMI_VIDEO))
- return -ENXIO;
+ return -ENODEV;
/*
* We request all registers starting from bplpt[0]
@@ -2333,7 +2333,7 @@
strcat(fb_info.fix.id, "Unknown");
goto default_chipset;
#else /* CONFIG_FB_AMIGA_OCS */
- err = -ENXIO;
+ err = -ENODEV;
goto amifb_error;
#endif /* CONFIG_FB_AMIGA_OCS */
break;
diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c
index 8ffdf35..b004036 100644
--- a/drivers/video/atmel_lcdfb.c
+++ b/drivers/video/atmel_lcdfb.c
@@ -441,14 +441,15 @@
value = DIV_ROUND_UP(clk_value_khz, PICOS2KHZ(info->var.pixclock));
- value = (value / 2) - 1;
- dev_dbg(info->device, " * programming CLKVAL = 0x%08lx\n", value);
-
- if (value <= 0) {
+ if (value < 2) {
dev_notice(info->device, "Bypassing pixel clock divider\n");
lcdc_writel(sinfo, ATMEL_LCDC_LCDCON1, ATMEL_LCDC_BYPASS);
} else {
- lcdc_writel(sinfo, ATMEL_LCDC_LCDCON1, value << ATMEL_LCDC_CLKVAL_OFFSET);
+ value = (value / 2) - 1;
+ dev_dbg(info->device, " * programming CLKVAL = 0x%08lx\n",
+ value);
+ lcdc_writel(sinfo, ATMEL_LCDC_LCDCON1,
+ value << ATMEL_LCDC_CLKVAL_OFFSET);
info->var.pixclock = KHZ2PICOS(clk_value_khz / (2 * (value + 1)));
dev_dbg(info->device, " updated pixclk: %lu KHz\n",
PICOS2KHZ(info->var.pixclock));
diff --git a/drivers/video/aty/atyfb_base.c b/drivers/video/aty/atyfb_base.c
index e4bcf53..bd4ac0b 100644
--- a/drivers/video/aty/atyfb_base.c
+++ b/drivers/video/aty/atyfb_base.c
@@ -3356,7 +3356,7 @@
info->fix.mmio_start = raddr;
par->ati_regbase = ioremap(info->fix.mmio_start, 0x1000);
- if (par->ati_regbase == 0)
+ if (par->ati_regbase == NULL)
return -ENOMEM;
info->fix.mmio_start += par->aux_start ? 0x400 : 0xc00;
diff --git a/drivers/video/aty/radeon_base.c b/drivers/video/aty/radeon_base.c
index 72cd0d2..400e926 100644
--- a/drivers/video/aty/radeon_base.c
+++ b/drivers/video/aty/radeon_base.c
@@ -2277,8 +2277,8 @@
do {
rinfo->fb_base = ioremap (rinfo->fb_base_phys,
rinfo->mapped_vram);
- } while ( rinfo->fb_base == 0 &&
- ((rinfo->mapped_vram /=2) >= MIN_MAPPED_VRAM) );
+ } while (rinfo->fb_base == NULL &&
+ ((rinfo->mapped_vram /= 2) >= MIN_MAPPED_VRAM));
if (rinfo->fb_base == NULL) {
printk (KERN_ERR "radeonfb (%s): cannot map FB\n",
diff --git a/drivers/video/cirrusfb.c b/drivers/video/cirrusfb.c
index 35ac9d9..c14b243 100644
--- a/drivers/video/cirrusfb.c
+++ b/drivers/video/cirrusfb.c
@@ -2432,9 +2432,9 @@
info->screen_size = board_size;
cinfo->unmap = cirrusfb_pci_unmap;
- printk(KERN_INFO " RAM (%lu kB) at 0xx%lx, ",
- info->screen_size >> 10, board_addr);
- printk(KERN_INFO "Cirrus Logic chipset on PCI bus\n");
+ printk(KERN_INFO "RAM (%lu kB) at 0x%lx, Cirrus "
+ "Logic chipset on PCI bus\n",
+ info->screen_size >> 10, board_addr);
pci_set_drvdata(pdev, info);
ret = cirrusfb_register(info);
diff --git a/drivers/video/console/fbcon.c b/drivers/video/console/fbcon.c
index ad31983..97aff8d 100644
--- a/drivers/video/console/fbcon.c
+++ b/drivers/video/console/fbcon.c
@@ -1853,6 +1853,8 @@
struct fb_info *info = registered_fb[con2fb_map[vc->vc_num]];
struct display *p = &fb_display[vc->vc_num];
int scroll_partial = info->flags & FBINFO_PARTIAL_PAN_OK;
+ unsigned short saved_ec;
+ int ret;
if (fbcon_is_inactive(vc, info))
return -EINVAL;
@@ -1865,6 +1867,11 @@
* whole screen (prevents flicker).
*/
+ saved_ec = vc->vc_video_erase_char;
+ vc->vc_video_erase_char = vc->vc_scrl_erase_char;
+
+ ret = 0;
+
switch (dir) {
case SM_UP:
if (count > vc->vc_rows) /* Maximum realistic size */
@@ -1883,7 +1890,7 @@
(b - count)),
vc->vc_scrl_erase_char,
vc->vc_size_row * count);
- return 1;
+ ret = 1;
break;
case SCROLL_WRAP_MOVE:
@@ -1955,7 +1962,8 @@
(b - count)),
vc->vc_scrl_erase_char,
vc->vc_size_row * count);
- return 1;
+ ret = 1;
+ break;
}
break;
@@ -1974,7 +1982,7 @@
t),
vc->vc_scrl_erase_char,
vc->vc_size_row * count);
- return 1;
+ ret = 1;
break;
case SCROLL_WRAP_MOVE:
@@ -2044,10 +2052,13 @@
t),
vc->vc_scrl_erase_char,
vc->vc_size_row * count);
- return 1;
+ ret = 1;
+ break;
}
+ break;
}
- return 0;
+ vc->vc_video_erase_char = saved_ec;
+ return ret;
}
@@ -2264,9 +2275,7 @@
* in fb_set_var()
*/
info->var.activate = var.activate;
- var.yoffset = info->var.yoffset;
- var.xoffset = info->var.xoffset;
- var.vmode = info->var.vmode;
+ var.vmode |= info->var.vmode & ~FB_VMODE_MASK;
fb_set_var(info, &var);
ops->var = info->var;
@@ -2507,6 +2516,9 @@
c = vc->vc_video_erase_char;
vc->vc_video_erase_char =
((c & 0xfe00) >> 1) | (c & 0xff);
+ c = vc->vc_def_color;
+ vc->vc_scrl_erase_char =
+ ((c & 0xFE00) >> 1) | (c & 0xFF);
vc->vc_attr >>= 1;
}
} else if (!vc->vc_hi_font_mask && cnt == 512) {
@@ -2537,9 +2549,14 @@
if (vc->vc_can_do_color) {
vc->vc_video_erase_char =
((c & 0xff00) << 1) | (c & 0xff);
+ c = vc->vc_def_color;
+ vc->vc_scrl_erase_char =
+ ((c & 0xFF00) << 1) | (c & 0xFF);
vc->vc_attr <<= 1;
- } else
+ } else {
vc->vc_video_erase_char = c & ~0x100;
+ vc->vc_scrl_erase_char = c & ~0x100;
+ }
}
}
diff --git a/drivers/video/display/display-sysfs.c b/drivers/video/display/display-sysfs.c
index 3547717..6ef800b 100644
--- a/drivers/video/display/display-sysfs.c
+++ b/drivers/video/display/display-sysfs.c
@@ -26,6 +26,7 @@
#include <linux/ctype.h>
#include <linux/idr.h>
#include <linux/err.h>
+#include <linux/kdev_t.h>
static ssize_t display_show_name(struct device *dev,
struct device_attribute *attr, char *buf)
@@ -152,10 +153,13 @@
mutex_unlock(&allocated_dsp_lock);
if (!ret) {
- new_dev->dev = device_create(display_class, parent, 0,
- "display%d", new_dev->idx);
+ new_dev->dev = device_create_drvdata(display_class,
+ parent,
+ MKDEV(0,0),
+ new_dev,
+ "display%d",
+ new_dev->idx);
if (!IS_ERR(new_dev->dev)) {
- dev_set_drvdata(new_dev->dev, new_dev);
new_dev->parent = parent;
new_dev->driver = driver;
mutex_init(&new_dev->lock);
diff --git a/drivers/video/dnfb.c b/drivers/video/dnfb.c
index b083ea7..606da04 100644
--- a/drivers/video/dnfb.c
+++ b/drivers/video/dnfb.c
@@ -284,6 +284,9 @@
{
int ret;
+ if (!MACH_IS_APOLLO)
+ return -ENODEV;
+
if (fb_get_options("dnfb", NULL))
return -ENODEV;
diff --git a/drivers/video/fsl-diu-fb.c b/drivers/video/fsl-diu-fb.c
index b50bb03..0a27853 100644
--- a/drivers/video/fsl-diu-fb.c
+++ b/drivers/video/fsl-diu-fb.c
@@ -1320,7 +1320,7 @@
* Power management hooks. Note that we won't be called from IRQ context,
* unlike the blank functions above, so we may sleep.
*/
-static int fsl_diu_suspend(struct of_device *dev, pm_message_t state)
+static int fsl_diu_suspend(struct of_device *ofdev, pm_message_t state)
{
struct fsl_diu_data *machine_data;
@@ -1330,7 +1330,7 @@
return 0;
}
-static int fsl_diu_resume(struct of_device *dev)
+static int fsl_diu_resume(struct of_device *ofdev)
{
struct fsl_diu_data *machine_data;
diff --git a/drivers/video/geode/lxfb_ops.c b/drivers/video/geode/lxfb_ops.c
index cd9d4cc..aaef916 100644
--- a/drivers/video/geode/lxfb_ops.c
+++ b/drivers/video/geode/lxfb_ops.c
@@ -63,54 +63,32 @@
{ 0x00014284, 19688 },
{ 0x00011104, 20400 },
{ 0x00016363, 23625 },
- { 0x00015303, 24380 },
{ 0x000031AC, 24923 },
{ 0x0000215D, 25175 },
{ 0x00001087, 27000 },
{ 0x0000216C, 28322 },
{ 0x0000218D, 28560 },
- { 0x00010041, 29913 },
{ 0x000010C9, 31200 },
{ 0x00003147, 31500 },
- { 0x000141A1, 32400 },
{ 0x000010A7, 33032 },
- { 0x00012182, 33375 },
- { 0x000141B1, 33750 },
{ 0x00002159, 35112 },
{ 0x00004249, 35500 },
{ 0x00000057, 36000 },
- { 0x000141E1, 37125 },
{ 0x0000219A, 37889 },
{ 0x00002158, 39168 },
{ 0x00000045, 40000 },
- { 0x000131A1, 40500 },
- { 0x00010061, 42301 },
{ 0x00000089, 43163 },
- { 0x00012151, 43875 },
{ 0x000010E7, 44900 },
{ 0x00002136, 45720 },
- { 0x000152E1, 47250 },
- { 0x00010071, 48000 },
{ 0x00003207, 49500 },
{ 0x00002187, 50000 },
- { 0x00014291, 50625 },
- { 0x00011101, 51188 },
- { 0x00017481, 54563 },
{ 0x00004286, 56250 },
- { 0x00014170, 57375 },
- { 0x00016210, 58500 },
{ 0x000010E5, 60065 },
- { 0x00013140, 62796 },
{ 0x00004214, 65000 },
- { 0x00016250, 65250 },
{ 0x00001105, 68179 },
- { 0x000141C0, 69600 },
- { 0x00015220, 70160 },
- { 0x00010050, 72000 },
{ 0x000031E4, 74250 },
{ 0x00003183, 75000 },
{ 0x00004284, 78750 },
- { 0x00012130, 80052 },
{ 0x00001104, 81600 },
{ 0x00006363, 94500 },
{ 0x00005303, 97520 },
diff --git a/drivers/video/hgafb.c b/drivers/video/hgafb.c
index fb9e672..c18880d 100644
--- a/drivers/video/hgafb.c
+++ b/drivers/video/hgafb.c
@@ -279,7 +279,7 @@
static int __init hga_card_detect(void)
{
- int count=0;
+ int count = 0;
void __iomem *p, *q;
unsigned short p_save, q_save;
@@ -303,20 +303,18 @@
writew(0x55aa, p); if (readw(p) == 0x55aa) count++;
writew(p_save, p);
- if (count != 2) {
- return 0;
- }
+ if (count != 2)
+ goto error;
/* Ok, there is definitely a card registering at the correct
* memory location, so now we do an I/O port test.
*/
- if (!test_hga_b(0x66, 0x0f)) { /* cursor low register */
- return 0;
- }
- if (!test_hga_b(0x99, 0x0f)) { /* cursor low register */
- return 0;
- }
+ if (!test_hga_b(0x66, 0x0f)) /* cursor low register */
+ goto error;
+
+ if (!test_hga_b(0x99, 0x0f)) /* cursor low register */
+ goto error;
/* See if the card is a Hercules, by checking whether the vsync
* bit of the status register is changing. This test lasts for
@@ -331,7 +329,7 @@
}
if (p_save == q_save)
- return 0;
+ goto error;
switch (inb_p(HGA_STATUS_PORT) & 0x70) {
case 0x10:
@@ -348,6 +346,12 @@
break;
}
return 1;
+error:
+ if (release_io_ports)
+ release_region(0x3b0, 12);
+ if (release_io_port)
+ release_region(0x3bf, 1);
+ return 0;
}
/**
diff --git a/drivers/video/hpfb.c b/drivers/video/hpfb.c
index 2eb4fb1..b8ebff1 100644
--- a/drivers/video/hpfb.c
+++ b/drivers/video/hpfb.c
@@ -382,7 +382,7 @@
#define INTFBPADDR 0x560000
if (!MACH_IS_HP300)
- return -ENXIO;
+ return -ENODEV;
if (fb_get_options("hpfb", NULL))
return -ENODEV;
diff --git a/drivers/video/leo.c b/drivers/video/leo.c
index 8bc46e9..13fea61 100644
--- a/drivers/video/leo.c
+++ b/drivers/video/leo.c
@@ -17,8 +17,8 @@
#include <linux/fb.h>
#include <linux/mm.h>
#include <linux/of_device.h>
+#include <linux/io.h>
-#include <asm/io.h>
#include <asm/fbio.h>
#include "sbuslib.h"
@@ -33,7 +33,6 @@
static int leo_mmap(struct fb_info *, struct vm_area_struct *);
static int leo_ioctl(struct fb_info *, unsigned int, unsigned long);
-static int leo_pan_display(struct fb_var_screeninfo *, struct fb_info *);
/*
* Frame buffer operations
@@ -43,7 +42,6 @@
.owner = THIS_MODULE,
.fb_setcolreg = leo_setcolreg,
.fb_blank = leo_blank,
- .fb_pan_display = leo_pan_display,
.fb_fillrect = cfb_fillrect,
.fb_copyarea = cfb_copyarea,
.fb_imageblit = cfb_imageblit,
@@ -78,7 +76,7 @@
#define LEO_CUR_TYPE_CMAP 0x00000050
struct leo_cursor {
- u8 xxx0[16];
+ u8 xxx0[16];
u32 cur_type;
u32 cur_misc;
u32 cur_cursxy;
@@ -105,7 +103,7 @@
struct leo_lc_ss0_krn {
u32 misc;
- u8 xxx0[0x800-4];
+ u8 xxx0[0x800-4];
u32 rev;
};
@@ -116,7 +114,7 @@
u32 fontt;
u32 extent;
u32 src;
- u32 dst;
+ u32 dst;
u32 copy;
u32 fill;
};
@@ -129,8 +127,8 @@
u8 unknown;
};
-struct leo_ld {
- u8 xxx0[0xe00];
+struct leo_ld_ss0 {
+ u8 xxx0[0xe00];
u32 csr;
u32 wid;
u32 wmask;
@@ -144,13 +142,13 @@
u32 src; /* Copy/Scroll (SS0 only) */
u32 dst; /* Copy/Scroll/Fill (SS0 only) */
u32 extent; /* Copy/Scroll/Fill size (SS0 only) */
- u32 xxx1[3];
+ u32 xxx1[3];
u32 setsem; /* SS1 only */
u32 clrsem; /* SS1 only */
u32 clrpick; /* SS1 only */
u32 clrdat; /* SS1 only */
u32 alpha; /* SS1 only */
- u8 xxx2[0x2c];
+ u8 xxx2[0x2c];
u32 winbg;
u32 planemask;
u32 rop;
@@ -199,11 +197,12 @@
static void leo_wait(struct leo_lx_krn __iomem *lx_krn)
{
int i;
-
+
for (i = 0;
- (sbus_readl(&lx_krn->krn_csr) & LEO_KRN_CSR_PROGRESS) && i < 300000;
+ (sbus_readl(&lx_krn->krn_csr) & LEO_KRN_CSR_PROGRESS) &&
+ i < 300000;
i++)
- udelay (1); /* Busy wait at most 0.3 sec */
+ udelay(1); /* Busy wait at most 0.3 sec */
return;
}
@@ -221,7 +220,7 @@
unsigned transp, struct fb_info *info)
{
struct leo_par *par = (struct leo_par *) info->par;
- struct leo_lx_krn __iomem *lx_krn = par->lx_krn;
+ struct leo_lx_krn __iomem *lx_krn = par->lx_krn;
unsigned long flags;
u32 val;
int i;
@@ -408,7 +407,7 @@
leo_wait(lx_krn);
for (i = 0, wi = wl->wl_list; i < wl->wl_count; i++, wi++) {
- switch(wi->wi_type) {
+ switch (wi->wi_type) {
case FB_WID_DBL_8:
j = (wi->wi_index & 0xf) + 0x40;
break;
@@ -453,13 +452,12 @@
wi.wi_index = 1;
wi.wi_values [0] = 0x30;
leo_wid_put(info, &wl);
-
}
static void leo_switch_from_graph(struct fb_info *info)
{
struct leo_par *par = (struct leo_par *) info->par;
- struct leo_ld __iomem *ss = (struct leo_ld __iomem *) par->ld_ss0;
+ struct leo_ld_ss0 __iomem *ss = par->ld_ss0;
unsigned long flags;
u32 val;
@@ -485,21 +483,15 @@
val = sbus_readl(&par->lc_ss0_usr->csr);
} while (val & 0x20000000);
+ /* setup screen buffer for cfb_* functions */
+ sbus_writel(1, &ss->wid);
+ sbus_writel(0x00ffffff, &ss->planemask);
+ sbus_writel(0x310b90, &ss->rop);
+ sbus_writel(0, &par->lc_ss0_usr->addrspace);
+
spin_unlock_irqrestore(&par->lock, flags);
}
-static int leo_pan_display(struct fb_var_screeninfo *var, struct fb_info *info)
-{
- /* We just use this to catch switches out of
- * graphics mode.
- */
- leo_switch_from_graph(info);
-
- if (var->xoffset || var->yoffset || var->vmode)
- return -EINVAL;
- return 0;
-}
-
static void leo_init_hw(struct fb_info *info)
{
struct leo_par *par = (struct leo_par *) info->par;
@@ -542,7 +534,8 @@
of_iounmap(&op->resource[0], info->screen_base, 0x800000);
}
-static int __devinit leo_probe(struct of_device *op, const struct of_device_id *match)
+static int __devinit leo_probe(struct of_device *op,
+ const struct of_device_id *match)
{
struct device_node *dp = op->node;
struct fb_info *info;
@@ -594,8 +587,9 @@
!info->screen_base)
goto out_unmap_regs;
- info->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN;
+ info->flags = FBINFO_DEFAULT;
info->fbops = &leo_ops;
+ info->pseudo_palette = par->clut_data;
leo_init_wids(info);
leo_init_hw(info);
@@ -649,7 +643,7 @@
static struct of_device_id leo_match[] = {
{
- .name = "leo",
+ .name = "SUNW,leo",
},
{},
};
diff --git a/drivers/video/logo/Kconfig b/drivers/video/logo/Kconfig
index 9de1c11..39ac49e 100644
--- a/drivers/video/logo/Kconfig
+++ b/drivers/video/logo/Kconfig
@@ -27,6 +27,16 @@
bool "Standard 224-color Linux logo"
default y
+config LOGO_BLACKFIN_VGA16
+ bool "16-colour Blackfin Processor Linux logo"
+ depends on BLACKFIN
+ default y
+
+config LOGO_BLACKFIN_CLUT224
+ bool "224-colour Blackfin Processor Linux logo"
+ depends on BLACKFIN
+ default y
+
config LOGO_DEC_CLUT224
bool "224-color Digital Equipment Corporation Linux logo"
depends on MACH_DECSTATION || ALPHA
diff --git a/drivers/video/logo/Makefile b/drivers/video/logo/Makefile
index a5fc4ed..b91251d 100644
--- a/drivers/video/logo/Makefile
+++ b/drivers/video/logo/Makefile
@@ -4,6 +4,8 @@
obj-$(CONFIG_LOGO_LINUX_MONO) += logo_linux_mono.o
obj-$(CONFIG_LOGO_LINUX_VGA16) += logo_linux_vga16.o
obj-$(CONFIG_LOGO_LINUX_CLUT224) += logo_linux_clut224.o
+obj-$(CONFIG_LOGO_BLACKFIN_CLUT224) += logo_blackfin_clut224.o
+obj-$(CONFIG_LOGO_BLACKFIN_VGA16) += logo_blackfin_vga16.o
obj-$(CONFIG_LOGO_DEC_CLUT224) += logo_dec_clut224.o
obj-$(CONFIG_LOGO_MAC_CLUT224) += logo_mac_clut224.o
obj-$(CONFIG_LOGO_PARISC_CLUT224) += logo_parisc_clut224.o
diff --git a/drivers/video/logo/logo.c b/drivers/video/logo/logo.c
index fc72684..2e85a2b 100644
--- a/drivers/video/logo/logo.c
+++ b/drivers/video/logo/logo.c
@@ -24,6 +24,8 @@
extern const struct linux_logo logo_linux_mono;
extern const struct linux_logo logo_linux_vga16;
extern const struct linux_logo logo_linux_clut224;
+extern const struct linux_logo logo_blackfin_vga16;
+extern const struct linux_logo logo_blackfin_clut224;
extern const struct linux_logo logo_dec_clut224;
extern const struct linux_logo logo_mac_clut224;
extern const struct linux_logo logo_parisc_clut224;
@@ -65,6 +67,10 @@
/* Generic Linux logo */
logo = &logo_linux_vga16;
#endif
+#ifdef CONFIG_LOGO_BLACKFIN_VGA16
+ /* Blackfin processor logo */
+ logo = &logo_blackfin_vga16;
+#endif
#ifdef CONFIG_LOGO_SUPERH_VGA16
/* SuperH Linux logo */
logo = &logo_superh_vga16;
@@ -76,6 +82,10 @@
/* Generic Linux logo */
logo = &logo_linux_clut224;
#endif
+#ifdef CONFIG_LOGO_BLACKFIN_CLUT224
+ /* Blackfin Linux logo */
+ logo = &logo_blackfin_clut224;
+#endif
#ifdef CONFIG_LOGO_DEC_CLUT224
/* DEC Linux logo on MIPS/MIPS64 or ALPHA */
logo = &logo_dec_clut224;
diff --git a/drivers/video/logo/logo_blackfin_clut224.ppm b/drivers/video/logo/logo_blackfin_clut224.ppm
new file mode 100644
index 0000000..dc9a50a
--- /dev/null
+++ b/drivers/video/logo/logo_blackfin_clut224.ppm
@@ -0,0 +1,1127 @@
+P3
+# This was generated by the GIMP & Netpbm tools
+# gimp linux_bf.svg (create 80x80 save as linux_bf.ppm)
+# pnmquant 224 linux_bf.ppm | pnmnoraw > logo_blackfin_clut224.ppm
+#
+80 80
+255
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+1 1 1 3 3 3 4 6 6 6 6 6 4 6 6 3 3 3
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 2 2 2 10 10 10 26 26 27
+44 44 45 66 66 66 78 81 81 78 81 81 75 75 76 60 60 60
+39 39 39 20 20 20 6 6 6 1 1 1 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 2 2 2 14 14 14 47 47 47 84 84 84 75 75 76
+47 47 47 12 12 12 0 0 0 0 0 0 0 0 0 20 20 20
+53 54 54 81 81 82 74 74 74 31 31 31 6 6 6 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+4 4 4 34 34 35 84 84 84 60 60 60 4 4 4 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 17 18 18 75 75 76 66 66 66 17 18 18
+1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 3 3 3
+42 42 43 84 84 84 8 8 8 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 3 3 36 40 40 10 16 16 0 0 0 31 31 31 84 84 84
+29 29 30 2 2 2 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 26 27 27
+84 84 84 3 3 3 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+15 19 19 114 115 115 110 114 114 44 46 46 0 0 0 12 12 12
+90 87 86 24 24 24 1 1 1 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 8 8 8 75 75 76
+14 14 14 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+30 40 40 133 133 133 129 130 130 78 85 85 23 31 30 0 0 0
+19 19 19 78 81 81 13 13 13 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 26 27 27 81 81 82
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+36 40 40 89 90 91 55 63 63 23 31 30 4 6 6 0 0 0
+0 0 0 60 60 60 47 47 47 2 2 2 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 2 2 2 53 54 54 34 34 35
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+4 10 10 7 9 9 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 1 1 1 84 84 84 13 13 13 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 4 6 6 78 81 81 2 2 2
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 65 64 64 36 36 36 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 10 11 11 81 81 82 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 12 12 12 67 70 70 4 4 4 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 16 16 16 81 81 82 0 0 0
+0 0 0 0 0 0 4 10 10 44 50 50 18 21 21 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 1 1 78 85 85 120 121 122 7 9 9 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 82 82 81 12 12 12 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 19 19 19 81 81 82 0 0 0
+0 0 0 2 2 2 8 8 8 55 63 63 108 110 110 52 58 58
+0 0 0 0 0 0 0 0 0 0 0 0 42 42 43 129 130 130
+140 142 143 114 115 115 110 114 114 129 130 130 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 75 75 76 24 24 24 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 19 19 19 74 74 74 0 0 0
+4 6 6 167 168 167 196 196 197 196 196 197 61 65 66 78 85 85
+0 0 0 0 0 0 0 0 0 118 118 118 202 202 203 219 219 219
+219 219 219 214 214 215 187 187 188 78 85 85 29 33 34 0 0 0
+0 0 0 0 0 0 0 0 0 60 60 60 39 39 39 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 19 19 19 72 71 71 0 0 0
+185 185 184 244 245 245 250 251 252 251 251 252 247 248 249 36 36 36
+0 0 0 0 0 0 13 13 13 243 243 241 252 252 252 253 253 253
+253 253 253 252 252 252 247 247 246 193 193 194 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 42 42 43 50 51 51 1 1 1
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 19 19 19 78 81 81 0 0 0
+247 247 246 193 193 194 95 97 97 193 193 194 255 255 255 237 237 238
+0 0 0 0 0 0 202 202 203 255 255 255 247 247 246 108 107 107
+82 85 86 167 168 167 255 255 255 248 248 249 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 34 34 35 56 56 56 2 2 2
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 19 19 19 78 81 81 0 0 0
+250 250 251 50 51 51 153 154 155 150 151 151 244 245 245 244 245 245
+44 50 50 84 89 89 153 154 155 255 255 255 140 142 143 0 0 0
+149 149 150 156 155 156 237 237 238 254 254 254 67 70 70 0 0 0
+0 0 0 0 0 0 0 0 0 39 39 39 47 47 47 1 1 1
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 19 19 19 81 81 82 0 0 0
+248 248 249 34 34 35 72 71 71 165 165 165 202 202 203 244 245 245
+10 16 16 82 85 86 89 90 91 255 255 255 95 97 97 0 0 0
+0 0 0 53 54 54 177 177 174 255 255 255 127 127 126 0 0 0
+0 0 0 0 0 0 0 0 0 39 39 39 36 36 36 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 14 14 14 78 81 81 0 0 0
+243 243 243 89 90 91 0 0 0 36 40 40 201 147 55 241 205 27
+241 205 27 241 205 27 241 205 27 238 192 33 108 110 110 0 0 0
+0 0 0 0 0 0 191 190 190 254 254 254 34 34 35 0 0 0
+0 0 0 0 0 0 0 0 0 42 42 43 42 42 43 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 10 10 10 75 75 76 0 0 0
+202 202 203 218 217 217 21 19 17 230 165 41 199 129 48 213 157 40
+244 212 23 243 206 27 180 121 62 243 206 27 244 209 25 226 179 40
+15 10 7 103 103 103 254 254 254 251 251 252 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 17 18 18 58 58 58 2 2 2
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 9 9 9 84 84 84 0 0 0
+0 0 0 226 226 219 213 157 40 244 209 25 245 211 23 245 211 23
+245 214 38 245 214 38 245 211 23 245 211 23 245 211 23 244 212 23
+244 212 23 241 205 27 226 179 40 196 196 197 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 74 74 74 4 6 6
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 7 7 7 84 84 84 0 0 0
+54 42 32 213 157 40 243 206 27 245 211 23 245 211 23 245 211 23
+245 215 41 245 214 35 245 211 23 245 211 23 245 214 35 245 215 41
+245 214 35 245 211 23 245 211 23 238 204 29 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 81 81 82 12 12 12
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 4 6 6 74 74 74 0 0 0
+201 147 55 241 205 27 245 211 23 245 211 23 245 211 23 245 213 29
+245 214 38 245 211 23 245 211 23 245 214 35 245 215 41 245 215 41
+245 213 29 142 83 36 142 83 36 244 209 25 1 1 1 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 74 74 74 25 25 26
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 4 4 4 72 71 71 6 6 6
+213 157 40 244 209 25 245 211 23 245 211 23 245 211 23 245 213 29
+244 212 23 245 211 23 245 214 35 245 215 41 245 215 41 245 213 29
+142 83 36 142 83 36 238 192 33 241 205 27 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 44 44 44 49 50 50
+2 2 2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 3 3 3 65 64 64 17 18 18
+199 129 48 199 129 48 245 211 23 245 211 23 245 211 23 245 211 23
+245 211 23 244 212 23 245 214 38 245 214 38 142 83 36 142 83 36
+142 83 36 245 211 23 244 210 23 230 165 41 0 0 0 0 0 0
+78 81 81 114 115 115 73 79 79 0 0 0 3 3 3 81 81 82
+9 9 9 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 1 1 1 49 50 50 29 29 30
+90 87 86 199 129 48 173 101 51 173 101 51 245 211 23 245 211 23
+245 211 23 230 165 41 142 83 36 142 83 36 142 83 36 245 211 23
+244 210 23 241 205 27 230 165 41 175 173 165 3 3 3 0 0 0
+44 46 46 118 118 118 118 118 118 108 110 110 0 0 0 75 75 76
+28 28 28 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 1 1 1 52 53 53 26 26 27
+118 118 118 175 173 165 199 129 48 173 101 51 173 101 51 173 101 51
+173 101 51 142 83 36 173 101 51 245 211 23 244 209 25 238 204 29
+213 157 40 214 196 166 227 227 227 214 214 215 120 121 122 0 0 0
+0 0 0 108 110 110 118 118 118 118 118 118 0 0 0 23 23 23
+66 66 66 4 6 6 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 7 7 7 75 75 76 4 4 4
+127 127 126 205 205 205 181 181 181 199 129 48 226 179 40 244 209 25
+244 209 25 244 209 25 243 206 27 238 192 33 213 157 40 187 166 103
+234 234 234 248 248 249 251 252 252 248 248 249 214 214 215 0 0 0
+0 0 0 0 0 0 103 103 103 100 103 103 0 0 0 0 0 0
+78 81 81 24 24 24 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 26 27 27 82 82 81 0 0 0
+146 146 147 234 234 234 222 221 221 178 178 179 180 121 62 213 157 40
+213 157 40 213 157 40 201 147 55 180 121 62 219 219 219 243 243 241
+253 253 253 255 255 255 255 255 255 255 255 255 250 250 251 120 121 122
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+20 20 20 72 71 71 8 8 8 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 10 10 10 75 75 76 22 22 22 0 0 0
+205 205 205 253 253 253 247 248 249 212 211 212 178 178 179 161 161 162
+165 165 165 181 181 181 205 205 205 227 227 227 244 245 245 254 254 254
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 239 239 240
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 67 70 70 39 39 39 2 2 2 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 4 4 4 50 51 51 60 60 60 0 0 0 16 16 16
+249 250 251 255 255 255 255 255 255 240 240 240 209 210 210 193 193 194
+200 200 197 212 211 212 231 231 231 246 247 248 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 253 253 253
+153 154 155 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 3 3 3 84 84 84 20 20 20 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+2 2 2 33 33 34 81 81 82 0 0 0 0 0 0 231 231 231
+255 255 255 255 255 255 255 255 255 253 253 253 234 234 234 222 221 221
+227 227 227 237 237 238 250 250 251 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
+240 240 240 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 26 27 27 72 71 71 8 8 8 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1
+21 21 22 84 84 84 7 7 7 0 0 0 150 151 151 252 252 252
+255 255 255 255 255 255 255 255 255 255 255 255 252 252 252 244 245 245
+246 247 248 253 253 253 255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
+251 251 252 9 9 9 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 65 64 64 47 47 47 3 3 3
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 12 12 12
+75 75 76 26 26 27 0 0 0 1 1 1 239 239 240 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 202 202 203 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 84 84 84 28 28 29
+1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 4 4 4 55 55 55
+60 60 60 0 0 0 0 0 0 95 97 97 248 248 249 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 244 245 245 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 14 14 14 82 82 81
+15 15 15 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 1 1 1 29 29 30 84 84 84
+0 0 0 0 0 0 0 0 0 156 155 156 247 247 246 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 247 247 246 240 240 240 232 232 233 232 232 233
+243 243 243 253 253 253 53 54 54 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 44 44 44
+60 60 60 6 6 6 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 10 10 10 81 81 82 14 14 14
+0 0 0 0 0 0 6 6 6 150 151 151 214 214 215 250 251 252
+255 255 255 255 255 255 255 255 255 246 247 248 218 217 217 214 214 215
+218 217 217 244 245 245 255 255 255 255 255 255 255 255 255 250 248 249
+232 232 233 214 214 215 196 196 197 182 183 184 181 181 181 181 181 181
+187 187 188 240 240 240 232 232 233 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+78 81 81 34 34 35 1 1 1 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 1 1 1 39 39 39 74 74 74 0 0 0
+0 0 0 0 0 0 60 60 60 161 161 162 200 200 197 229 229 230
+251 251 252 255 255 255 255 255 255 255 255 255 243 243 241 214 214 215
+248 248 249 255 255 255 255 255 255 255 255 255 255 255 255 254 254 254
+239 239 240 214 214 215 193 193 194 182 183 184 178 178 179 176 177 177
+176 177 177 182 183 184 248 248 249 14 14 14 0 0 0 61 65 66
+10 16 16 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+10 10 10 84 84 84 13 13 13 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 10 11 11 82 82 81 7 7 7 0 0 0
+0 0 0 0 0 0 165 165 165 229 229 230 249 250 251 254 254 254
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 253 253 253 240 240 240 227 227 227 205 205 205
+181 181 181 176 177 177 191 190 190 227 227 227 0 0 0 44 50 50
+84 89 89 61 65 66 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 58 58 58 49 50 50 3 3 3 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 1 1 1 36 36 36 66 66 66 0 0 0 29 33 34
+0 3 3 26 27 27 234 234 234 254 254 254 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
+254 254 254 253 253 254 252 253 253 253 253 254 253 254 254 253 254 254
+254 254 254 255 255 255 255 255 255 255 255 255 255 255 255 251 251 252
+227 227 227 187 187 188 176 177 177 222 221 221 13 13 13 0 0 0
+12 15 14 73 79 79 36 40 40 0 0 0 0 0 0 0 0 0
+0 0 0 1 1 1 90 87 86 17 18 18 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 7 7 7 78 81 81 12 12 12 23 31 30 52 58 58
+0 0 0 209 210 210 253 253 253 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 254 254 254
+251 251 252 150 151 151 103 103 103 129 130 130 196 196 197 250 250 251
+252 252 253 254 254 254 255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 240 240 240 193 193 194 196 196 197 229 229 230 0 0 0
+0 0 0 4 10 10 30 40 40 0 3 3 0 0 0 0 0 0
+0 0 0 0 0 0 47 47 47 53 54 54 3 3 3 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 23 23 23 81 81 82 0 0 0 52 58 58 36 40 40
+42 42 43 250 250 251 255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 254 254 254
+227 227 227 7 7 7 7 7 7 7 7 7 7 7 7 44 44 45
+156 155 156 249 250 251 253 253 253 254 254 254 255 255 255 255 255 255
+255 255 255 255 255 255 247 247 246 222 221 221 239 239 240 0 0 0
+30 40 40 44 50 50 23 31 30 29 33 34 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 90 87 86 16 16 16 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+2 2 2 50 51 51 42 42 43 29 33 34 52 58 58 0 0 0
+232 232 233 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 254 254 254
+250 251 252 44 44 44 7 7 7 7 7 7 7 7 7 7 7 7
+7 7 7 56 56 56 209 210 210 252 252 253 254 254 254 255 255 255
+255 255 255 255 255 255 255 255 255 254 253 253 249 250 251 146 146 147
+36 40 40 44 50 50 36 40 40 67 70 70 61 65 66 0 0 0
+0 0 0 0 0 0 0 0 0 55 55 55 44 44 45 1 1 1
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+10 10 10 81 81 82 1 1 1 52 58 58 44 50 50 52 53 53
+251 251 252 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 254 254 254
+253 253 253 187 187 188 8 8 8 7 7 7 7 7 7 7 7 7
+7 7 7 7 7 7 19 19 19 178 178 179 252 252 253 254 254 254
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 237 237 238
+10 16 16 30 40 40 0 3 3 23 31 30 84 89 89 0 0 0
+0 0 0 0 0 0 0 0 0 3 3 3 81 81 82 9 9 9
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+29 29 30 72 71 71 10 16 16 52 58 58 0 0 0 222 221 221
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
+254 254 254 251 251 252 95 97 97 7 7 7 7 7 7 7 7 7
+7 7 7 7 7 7 7 7 7 10 10 10 161 161 162 251 252 252
+254 254 254 255 255 255 255 255 255 255 255 255 255 255 255 248 248 249
+0 0 0 0 0 0 0 0 0 0 0 0 84 89 89 0 3 3
+0 0 0 0 0 0 0 0 0 0 0 0 74 74 74 26 27 27
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 4 4 4
+65 64 64 20 20 20 20 25 25 30 40 40 0 0 0 247 247 246
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 253 253 254 222 221 221 9 9 9 7 7 7 7 7 7
+7 7 7 7 7 7 7 7 7 7 7 7 8 8 8 149 149 150
+252 252 253 254 254 254 255 255 255 255 255 255 255 255 255 252 252 252
+0 0 0 0 0 0 0 0 0 0 0 0 73 79 79 12 15 14
+0 0 0 0 0 0 0 0 0 0 0 0 36 36 36 58 58 58
+3 3 3 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 20 20 20
+74 74 74 0 0 0 4 10 10 4 10 10 36 36 36 252 252 252
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 227 227 227 253 253 253 255 255 255
+255 255 255 254 254 254 250 251 252 65 64 64 7 7 7 7 7 7
+7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 8 8 8
+146 146 147 251 252 252 254 254 254 255 255 255 255 255 255 253 254 254
+0 0 0 0 0 0 0 0 0 0 0 0 52 58 58 10 16 16
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 82 82 81
+9 9 9 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 4 6 6 65 64 64
+25 25 25 0 3 3 30 40 40 0 0 0 187 187 188 254 254 254
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 193 193 194 253 252 252 255 255 255
+255 255 255 255 255 255 252 253 253 129 130 130 7 7 7 7 7 7
+7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7
+8 8 8 149 149 150 252 252 253 254 254 254 255 255 255 254 254 254
+52 53 53 0 0 0 0 0 0 0 0 0 20 25 25 2 5 4
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 81 81 82
+20 20 20 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 26 26 27 81 81 82
+0 0 0 18 21 21 73 79 79 0 0 0 237 237 238 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 182 183 184 255 255 255 255 255 255
+255 255 255 255 255 255 253 253 253 176 177 177 7 7 7 7 7 7
+7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7
+7 7 7 8 8 8 153 154 155 251 252 252 254 254 254 255 255 255
+150 151 151 0 0 0 0 0 0 0 0 0 20 25 25 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 65 64 64
+33 33 34 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 6 6 6 67 70 70 20 20 20
+0 0 0 23 31 30 82 85 86 0 0 0 247 247 246 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 182 183 184 255 255 255 255 255 255
+255 255 255 255 255 255 253 254 254 214 214 215 7 7 7 7 7 7
+7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7
+7 7 7 7 7 7 8 8 8 156 155 156 252 252 253 254 254 254
+167 168 167 0 0 0 0 0 0 0 0 0 67 70 70 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 47 47 47
+44 44 44 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 21 21 22 75 75 76 0 0 0
+0 0 0 29 33 34 84 89 89 0 0 0 248 248 249 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 248 248 249 181 181 181 255 255 255 255 255 255
+255 255 255 255 255 255 254 254 254 240 240 240 7 7 7 7 7 7
+7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7
+7 7 7 7 7 7 7 7 7 8 8 8 161 161 162 251 252 252
+185 185 184 4 4 4 0 0 0 10 11 11 100 103 103 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 36 36 36
+55 55 55 2 2 2 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 33 33 34 50 51 51 0 0 0
+0 0 0 9 11 11 82 85 86 10 16 16 248 248 249 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 245 244 245 179 180 181 255 255 255 255 255 255
+255 255 255 255 255 255 254 254 254 251 252 252 20 20 20 7 7 7
+7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7
+7 7 7 7 7 7 7 7 7 7 7 7 10 10 10 161 161 162
+205 205 205 17 18 18 0 0 0 95 97 97 78 81 81 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 36 36 36
+53 54 54 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 31 31 31 58 58 58 0 0 0
+0 0 0 0 0 0 67 70 70 78 81 81 248 248 249 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 234 234 234 179 180 181 255 255 255 255 255 255
+255 255 255 255 255 255 254 254 254 251 252 252 23 23 23 7 7 7
+7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7
+10 11 11 84 84 84 161 161 162 209 210 210 229 229 230 237 237 238
+202 202 203 26 26 27 9 11 11 44 50 50 0 0 0 4 6 6
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 52 53 53
+39 39 39 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 23 23 23 78 81 81 213 157 40
+243 206 27 243 206 27 54 42 32 73 79 79 222 221 221 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 238 238 236 178 178 179 255 255 255 255 255 255
+255 255 255 255 255 255 254 254 254 251 252 253 36 36 36 7 7 7
+7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 84 84 84
+222 221 221 251 252 252 252 253 253 253 253 253 253 254 254 252 252 253
+146 146 147 140 142 143 156 155 156 110 114 114 26 27 27 82 85 86
+84 89 89 95 97 97 36 40 40 0 0 0 0 0 0 74 74 74
+23 23 23 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 2 2 2 14 14 14
+24 24 24 26 26 27 26 26 27 26 26 27 25 25 26 21 21 22
+7 7 7 0 0 0 1 1 1 34 34 35 238 192 33 244 210 23
+244 212 23 244 212 23 244 210 23 88 79 47 200 200 197 254 254 254
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 244 245 245 179 180 181 255 255 255 255 255 255
+255 255 255 255 255 255 254 254 254 252 252 253 36 36 36 7 7 7
+7 7 7 7 7 7 7 7 7 8 8 8 149 149 150 251 251 252
+252 252 253 253 253 253 253 253 253 250 248 249 239 223 156 239 223 156
+120 121 122 182 183 184 176 177 177 120 121 122 33 33 34 3 3 3
+0 0 0 67 70 70 146 146 147 20 25 25 1 1 1 82 82 81
+9 9 9 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 19 19 19 89 90 91
+146 146 147 150 151 151 150 151 151 150 151 151 150 151 151 129 130 130
+58 58 58 6 6 6 14 14 14 201 147 55 245 211 23 245 213 29
+245 214 35 245 215 41 245 213 29 244 210 23 142 83 36 232 232 233
+254 254 254 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 185 185 184 255 255 255 255 255 255
+255 255 255 255 255 255 254 254 254 251 252 252 50 51 51 7 7 7
+7 7 7 7 7 7 7 7 7 146 146 147 251 252 252 252 253 253
+251 252 253 239 239 240 171 168 154 129 130 130 137 136 134 175 173 165
+221 218 200 65 64 64 22 22 22 186 186 187 114 115 115 26 26 27
+2 2 2 0 0 0 61 65 66 31 33 27 238 192 33 108 96 91
+9 9 9 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 2 2 2 52 53 53 178 178 179
+21 21 22 7 7 7 7 7 7 7 7 7 7 7 7 118 118 118
+137 136 134 36 36 36 65 64 64 243 206 27 244 212 23 245 215 41
+245 215 41 245 215 41 245 215 41 244 209 25 244 209 25 1 1 1
+219 219 219 253 253 253 255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 214 214 215 255 255 255 255 255 255
+255 255 255 255 255 255 254 254 254 252 252 253 50 51 51 7 7 7
+7 7 7 7 7 7 84 84 84 250 251 252 252 253 253 251 251 252
+167 168 167 22 22 22 7 7 7 7 7 7 7 7 7 7 7 7
+7 7 7 7 7 7 7 7 7 34 34 35 187 187 188 103 103 103
+29 29 30 3 3 3 7 9 9 238 204 29 245 215 41 245 214 35
+28 28 28 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 7 7 7 90 87 86 178 178 179
+7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 16 16 16
+193 193 194 133 133 133 187 166 103 245 218 76 245 218 76 245 216 51
+245 216 51 245 218 76 246 224 96 245 218 76 245 218 76 245 218 76
+25 25 25 186 186 187 252 252 252 254 254 254 254 254 254 253 254 254
+254 254 254 254 254 254 254 254 254 246 247 248 254 254 254 253 254 254
+254 254 254 254 254 254 253 254 254 251 252 252 36 36 36 7 7 7
+7 7 7 20 20 20 229 229 230 253 253 253 252 253 253 178 178 179
+10 10 10 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7
+7 7 7 7 7 7 7 7 7 7 7 7 42 42 43 196 196 197
+118 118 118 33 33 34 238 204 29 245 215 41 245 215 41 245 215 41
+49 50 50 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 17 18 18 120 121 122 137 136 134
+7 7 7 7 7 7 34 34 35 20 20 20 7 7 7 7 7 7
+202 202 203 209 206 202 193 187 162 193 187 162 248 234 156 245 218 76
+245 218 76 248 234 156 193 187 162 193 187 162 193 187 162 214 196 166
+240 219 129 95 97 97 196 196 197 186 186 187 187 187 188 196 196 197
+252 252 253 251 252 253 212 211 212 187 187 188 196 196 197 251 252 252
+218 217 217 187 187 188 191 190 190 250 251 252 24 24 24 7 7 7
+7 7 7 110 114 114 252 252 253 253 254 254 250 251 252 89 90 91
+89 90 91 129 130 130 127 127 126 44 44 44 7 7 7 7 7 7
+7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 49 50 50
+202 202 203 214 196 166 245 216 51 245 214 38 245 214 35 245 214 38
+58 58 58 2 2 2 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 31 31 31 156 155 156 82 82 81
+7 7 7 10 10 10 237 237 238 66 66 66 7 7 7 25 25 25
+247 248 249 81 81 82 7 7 7 31 31 31 247 237 174 245 218 76
+246 226 108 200 200 197 7 7 7 7 7 7 7 7 7 137 136 134
+247 237 174 193 193 194 72 71 71 7 7 7 7 7 7 8 8 8
+196 196 197 250 251 252 67 70 70 7 7 7 84 84 84 244 245 245
+47 47 47 7 7 7 118 118 118 249 250 251 12 12 12 7 7 7
+9 9 9 218 217 217 253 253 253 254 254 254 252 253 253 251 251 252
+249 250 251 237 237 238 95 97 97 9 9 9 15 15 15 95 97 97
+47 47 47 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7
+66 66 66 240 230 197 246 226 108 245 214 38 245 211 23 244 212 23
+65 64 64 3 3 3 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 2 2 2 52 53 53 185 185 184 25 25 25
+7 7 7 60 60 60 240 240 240 14 14 14 7 7 7 84 84 84
+247 248 249 23 23 23 7 7 7 94 91 88 248 234 156 245 218 76
+248 234 156 127 127 126 7 7 7 7 7 7 7 7 7 167 168 167
+251 248 240 65 64 64 7 7 7 7 7 7 7 7 7 7 7 7
+84 84 84 243 243 243 15 15 15 7 7 7 140 142 143 146 146 147
+7 7 7 33 33 34 237 237 238 243 243 243 21 21 22 120 121 122
+218 217 217 252 252 253 254 254 254 253 253 254 252 253 253 251 252 252
+247 248 249 72 71 71 7 7 7 58 58 58 222 221 221 248 248 249
+75 75 76 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7
+7 7 7 82 82 81 246 239 193 246 226 108 245 216 51 245 214 38
+238 192 33 21 21 22 1 1 1 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 8 8 8 90 87 86 182 183 184 7 7 7
+7 7 7 120 121 122 187 187 188 7 7 7 7 7 7 146 146 147
+205 205 205 7 7 7 7 7 7 153 153 148 240 219 129 246 224 96
+246 239 193 39 39 39 60 60 60 108 110 110 7 7 7 202 202 203
+227 227 227 7 7 7 7 7 7 205 205 205 89 90 91 7 7 7
+120 121 122 193 193 194 7 7 7 7 7 7 186 186 187 25 25 25
+7 7 7 167 168 167 251 251 252 243 243 243 214 214 215 250 251 252
+251 252 253 254 254 254 253 253 253 219 219 219 140 140 139 140 140 139
+118 118 118 7 7 7 52 53 53 237 237 238 247 247 246 176 177 177
+8 8 8 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7
+7 7 7 7 7 7 95 97 97 246 239 193 246 226 108 245 216 51
+245 214 38 201 147 55 31 31 31 103 103 103 103 103 103 72 71 71
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 17 18 18 127 127 126 140 140 139 7 7 7
+7 7 7 17 18 18 17 18 18 7 7 7 95 97 97 244 245 245
+146 146 147 7 7 7 7 7 7 200 200 197 246 226 108 240 219 129
+194 194 184 7 7 7 140 140 139 89 90 91 7 7 7 232 232 233
+165 165 165 7 7 7 31 31 31 249 250 251 39 39 39 7 7 7
+176 177 177 133 133 133 7 7 7 22 22 22 108 110 110 7 7 7
+72 71 71 251 252 252 252 253 253 250 251 252 247 248 249 205 205 205
+251 252 253 254 254 254 252 252 253 84 84 84 7 7 7 7 7 7
+7 7 7 7 7 7 140 142 143 247 248 249 140 140 139 14 14 14
+7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 16 16 16
+14 14 14 7 7 7 7 7 7 114 115 115 246 239 193 246 224 96
+245 216 51 245 216 51 243 235 220 176 177 177 185 185 184 229 229 230
+47 47 47 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 31 31 31 156 155 156 90 87 86 7 7 7
+7 7 7 7 7 7 7 7 7 31 31 31 243 243 241 247 247 246
+84 84 84 7 7 7 26 27 27 246 239 193 246 226 108 248 234 156
+108 110 110 7 7 7 212 211 212 44 44 44 22 22 22 249 250 251
+108 107 107 7 7 7 89 90 91 238 238 236 114 115 115 118 118 118
+231 231 231 75 75 76 7 7 7 34 34 35 10 11 11 12 12 12
+214 214 215 253 253 253 253 253 253 200 200 197 31 31 31 103 103 103
+252 252 253 252 253 253 218 217 217 9 9 9 7 7 7 7 7 7
+7 7 7 7 7 7 25 25 25 39 39 39 7 7 7 7 7 7
+7 7 7 7 7 7 7 7 7 7 7 7 103 103 103 234 234 234
+181 181 181 7 7 7 7 7 7 7 7 7 133 133 133 247 237 174
+246 224 96 246 226 108 185 185 184 177 177 174 153 154 155 181 181 181
+140 140 139 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 1 1 1 49 50 50 186 186 187 28 28 28 7 7 7
+12 12 12 22 22 22 7 7 7 7 7 7 108 107 107 247 247 246
+25 25 25 7 7 7 90 87 86 247 237 174 246 226 108 246 239 193
+28 28 28 44 44 44 237 237 238 9 9 9 53 54 54 249 250 251
+49 50 50 7 7 7 153 153 148 249 241 199 214 196 166 185 185 184
+229 229 230 19 19 19 7 7 7 7 7 7 7 7 7 103 103 103
+251 252 253 254 254 254 253 253 253 150 151 151 7 7 7 187 187 188
+252 252 253 251 251 252 103 103 103 7 7 7 7 7 7 7 7 7
+7 7 7 23 23 23 17 18 18 7 7 7 7 7 7 7 7 7
+7 7 7 7 7 7 12 12 12 153 153 148 246 239 193 249 241 199
+161 161 162 9 9 9 84 84 84 108 110 110 25 25 25 153 153 148
+247 237 174 246 224 96 218 217 217 165 165 165 182 183 184 193 193 194
+114 115 115 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 4 4 4 74 74 74 181 181 181 7 7 7 7 7 7
+110 114 114 200 200 197 7 7 7 7 7 7 60 60 60 209 210 210
+7 7 7 7 7 7 146 146 147 248 234 156 248 234 156 177 177 174
+7 7 7 118 118 118 193 193 194 7 7 7 84 84 84 232 232 233
+8 8 8 7 7 7 209 210 210 221 218 200 193 187 162 219 219 219
+200 200 197 7 7 7 7 7 7 7 7 7 7 7 7 95 97 97
+251 252 252 254 254 254 252 253 253 118 118 118 29 29 30 247 248 249
+252 252 253 227 227 227 16 16 16 7 7 7 7 7 7 7 7 7
+100 103 103 218 217 217 219 218 214 7 7 7 7 7 7 7 7 7
+7 7 7 21 21 22 185 185 184 246 239 193 248 234 156 240 230 197
+60 60 60 194 194 184 246 239 193 249 241 199 137 136 134 10 10 10
+171 168 154 248 234 156 248 234 156 226 226 219 209 210 210 249 241 199
+28 28 28 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 13 13 13 108 110 110 146 146 147 7 7 7 7 7 7
+167 168 167 140 140 139 7 7 7 7 7 7 120 121 122 146 146 147
+7 7 7 7 7 7 194 194 184 240 219 129 247 237 174 95 97 97
+7 7 7 95 97 97 90 87 86 7 7 7 118 118 118 176 177 177
+7 7 7 28 28 28 248 248 249 44 44 45 7 7 7 167 168 167
+140 140 139 7 7 7 36 36 36 74 74 74 7 7 7 65 64 64
+251 252 253 254 254 254 251 252 252 81 81 82 108 110 110 251 252 252
+251 251 252 127 127 126 7 7 7 7 7 7 8 8 8 140 140 139
+181 181 181 140 140 139 221 218 200 7 7 7 7 7 7 7 7 7
+34 34 35 209 210 210 231 231 231 246 239 193 247 237 174 194 194 184
+227 227 227 249 241 199 240 219 129 248 234 156 153 153 148 7 7 7
+13 13 13 185 185 184 248 234 156 245 218 76 245 216 51 245 214 38
+31 31 31 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 31 31 31 153 154 155 89 90 91 7 7 7 8 8 8
+232 232 233 82 82 81 7 7 7 7 7 7 179 180 181 89 90 91
+7 7 7 24 24 24 243 235 220 248 234 156 240 230 197 20 20 20
+7 7 7 7 7 7 7 7 7 7 7 7 149 149 150 118 118 118
+7 7 7 90 87 86 229 229 230 7 7 7 7 7 7 229 229 230
+82 82 81 7 7 7 95 97 97 100 103 103 7 7 7 34 34 35
+251 252 252 253 253 254 251 251 252 47 47 47 193 193 194 251 252 252
+239 239 240 23 23 23 7 7 7 13 13 13 165 165 165 234 234 234
+149 149 150 146 114 101 200 200 197 7 7 7 7 7 7 52 53 53
+227 227 227 167 168 167 16 16 16 214 196 166 248 234 156 243 235 220
+219 219 219 156 155 156 247 237 174 246 239 193 75 75 76 7 7 7
+60 60 60 227 227 227 243 235 220 240 219 129 245 218 76 245 213 29
+16 16 16 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+1 1 1 49 50 50 185 185 184 33 33 34 7 7 7 10 11 11
+56 56 56 16 16 16 7 7 7 10 10 10 237 237 238 26 27 27
+7 7 7 55 55 55 185 185 184 221 218 200 167 168 167 7 7 7
+20 20 20 39 39 39 10 11 11 7 7 7 181 181 181 58 58 58
+7 7 7 103 103 103 133 133 133 7 7 7 44 44 44 247 248 249
+24 24 24 7 7 7 156 155 156 129 130 130 7 7 7 9 9 9
+244 245 245 252 253 253 237 237 238 34 34 35 248 248 249 251 251 252
+161 161 162 7 7 7 24 24 24 187 187 188 212 211 212 67 70 70
+187 187 188 173 170 143 209 206 202 10 10 10 95 97 97 237 237 238
+129 130 130 8 8 8 89 90 91 246 239 193 247 237 174 177 177 174
+17 18 18 137 136 134 249 241 199 219 218 214 10 10 10 95 97 97
+243 243 243 150 151 151 31 31 31 221 218 200 240 219 129 53 54 54
+3 3 3 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+4 4 4 72 71 71 182 183 184 7 7 7 7 7 7 7 7 7
+7 7 7 7 7 7 12 12 12 161 161 162 209 210 210 7 7 7
+7 7 7 7 7 7 7 7 7 187 187 188 82 82 81 7 7 7
+146 146 147 247 248 249 17 18 18 7 7 7 212 211 212 47 47 47
+7 7 7 7 7 7 7 7 7 8 8 8 146 146 147 205 205 205
+7 7 7 7 7 7 214 214 215 156 155 156 7 7 7 7 7 7
+218 217 217 251 252 252 186 186 187 110 114 114 249 250 251 248 248 249
+75 75 76 34 34 35 205 205 205 129 130 130 16 16 16 7 7 7
+156 155 156 214 196 166 240 230 197 243 243 241 227 227 227 74 74 74
+7 7 7 29 29 30 226 226 219 249 241 199 175 173 165 14 14 14
+9 9 9 221 218 200 246 239 193 153 153 148 146 146 147 246 247 248
+110 114 114 7 7 7 7 7 7 42 42 43 193 193 194 95 97 97
+19 19 19 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+6 6 6 84 84 84 140 142 143 7 7 7 7 7 7 7 7 7
+7 7 7 20 20 20 177 177 174 249 241 199 149 149 150 7 7 7
+7 7 7 7 7 7 10 11 11 226 226 219 13 13 13 8 8 8
+219 218 214 219 218 214 7 7 7 8 8 8 238 238 236 200 200 197
+13 13 13 7 7 7 13 13 13 161 161 162 243 235 220 146 146 147
+7 7 7 29 29 30 232 232 233 176 177 177 7 7 7 7 7 7
+182 183 184 237 237 238 129 130 130 167 168 167 176 177 177 202 202 203
+10 11 11 95 97 97 44 44 45 7 7 7 7 7 7 7 7 7
+75 75 76 226 226 219 243 235 220 156 155 156 24 24 24 7 7 7
+7 7 7 176 177 177 247 247 246 200 200 197 17 18 18 7 7 7
+49 50 50 246 239 193 248 234 156 251 248 240 239 239 240 84 84 84
+7 7 7 7 7 7 7 7 7 7 7 7 60 60 60 187 187 188
+84 84 84 14 14 14 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+4 4 4 53 54 54 137 136 134 156 155 156 161 161 162 161 161 162
+167 168 167 239 223 156 240 219 129 246 226 108 239 223 156 239 223 156
+239 223 156 239 223 156 214 196 166 239 223 156 193 187 162 193 187 162
+248 234 156 239 223 156 193 187 162 193 187 162 248 234 156 248 234 156
+214 196 166 193 187 162 214 196 166 248 234 156 240 219 129 214 196 166
+193 187 162 193 187 162 171 168 154 146 146 147 137 136 134 137 136 134
+161 161 162 209 210 210 65 64 64 202 202 203 179 180 181 140 140 139
+7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7
+7 7 7 60 60 60 39 39 39 7 7 7 7 7 7 7 7 7
+66 66 66 249 250 251 202 202 203 16 16 16 7 7 7 7 7 7
+23 23 23 243 235 220 246 239 193 226 226 219 52 53 53 7 7 7
+7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 75 75 76
+176 177 177 66 66 66 9 9 9 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 10 10 10 28 28 29 34 34 35 36 36 36 36 36 36
+44 44 45 146 114 101 241 207 50 241 207 50 241 207 50 241 211 63
+241 211 63 241 211 63 241 211 63 241 211 63 241 211 63 245 216 51
+245 216 51 245 216 51 241 211 63 241 211 63 245 216 51 241 211 63
+245 218 76 245 218 76 245 216 51 245 215 41 245 214 38 241 207 50
+241 211 63 201 147 55 88 79 47 29 29 30 34 34 35 42 42 43
+103 103 103 191 190 190 75 75 76 196 196 197 200 200 197 65 64 64
+7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7
+7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7
+90 87 86 146 146 147 19 19 19 7 7 7 7 7 7 7 7 7
+7 7 7 90 87 86 140 140 139 31 31 31 7 7 7 7 7 7
+7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7
+103 103 103 161 161 162 53 54 54 7 7 7 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 12 12 12 50 51 51 146 114 101 180 121 62 199 129 48
+201 147 55 213 157 40 213 157 40 230 165 41 226 179 40 226 179 40
+238 192 33 241 205 27 244 209 25 244 210 23 244 212 23 245 211 23
+245 211 23 245 211 23 245 211 23 244 209 25 238 204 29 226 179 40
+213 157 40 199 129 48 54 42 32 0 0 0 4 6 6 44 44 45
+150 151 151 129 130 130 137 136 134 205 205 205 202 202 203 8 8 8
+7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7
+7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7
+7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7
+7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7
+7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7
+7 7 7 129 130 130 146 146 147 47 47 47 4 4 4 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 2 2 2 12 12 12 28 28 29 49 50 50
+74 74 74 108 96 91 180 121 62 180 121 62 199 129 48 201 147 55
+213 157 40 230 165 41 226 179 40 238 192 33 241 205 27 241 205 27
+243 206 27 243 206 27 241 205 27 238 204 29 226 179 40 213 157 40
+199 129 48 199 129 48 21 19 17 65 64 64 103 103 103 167 168 167
+202 202 203 24 24 24 193 193 194 229 229 230 140 140 139 7 7 7
+7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7
+7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7
+7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7
+7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7
+7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7
+7 7 7 8 8 8 156 155 156 133 133 133 36 36 36 3 3 3
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1
+4 4 4 10 11 11 21 21 22 39 39 39 60 60 60 108 96 91
+180 121 62 199 129 48 199 129 48 213 157 40 230 165 41 226 179 40
+226 179 40 226 179 40 226 179 40 226 179 40 213 157 40 199 129 48
+180 121 62 99 91 79 72 71 71 56 56 56 129 130 130 167 168 167
+21 21 22 17 18 18 231 231 231 229 229 230 52 53 53 7 7 7
+7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7
+7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7
+7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7
+7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7
+7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7
+7 7 7 7 7 7 13 13 13 176 177 177 120 121 122 33 33 34
+2 2 2 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 2 2 2 8 8 8
+21 21 22 47 47 47 99 91 79 180 121 62 199 129 48 199 129 48
+201 147 55 213 157 40 213 157 40 201 147 55 199 129 48 180 121 62
+99 91 79 26 26 27 9 9 9 60 60 60 186 186 187 31 31 31
+7 7 7 60 60 60 243 243 243 209 210 210 7 7 7 7 7 7
+7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7
+7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7
+7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7
+7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7
+7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7 7
+7 7 7 7 7 7 7 7 7 26 27 27 193 193 194 108 110 110
+22 22 22 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 1 1 1 8 8 8 24 24 24 58 58 58 108 96 91
+180 121 62 180 121 62 180 121 62 180 121 62 180 121 62 72 71 71
+15 15 15 0 0 0 4 6 6 75 75 76 156 155 156 24 24 24
+24 24 24 108 107 107 232 232 233 137 136 134 24 24 24 24 24 24
+24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24
+24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24
+24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24
+24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24
+24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24
+24 24 24 24 24 24 24 24 24 24 24 24 58 58 58 176 177 177
+60 60 60 3 3 3
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 2 2 2 12 12 12
+26 27 27 44 44 44 55 55 55 50 51 51 29 29 30 8 8 8
+0 0 0 0 0 0 3 3 3 47 47 47 127 127 126 150 151 151
+150 151 151 140 142 143 129 130 130 140 142 143 150 151 151 150 151 151
+150 151 151 150 151 151 150 151 151 150 151 151 150 151 151 150 151 151
+150 151 151 150 151 151 153 154 155 161 161 162 165 165 165 167 168 167
+177 177 174 167 168 167 161 161 162 156 155 156 150 151 151 150 151 151
+150 151 151 150 151 151 150 151 151 150 151 151 150 151 151 150 151 151
+150 151 151 150 151 151 150 151 151 150 151 151 150 151 151 150 151 151
+150 151 151 150 151 151 150 151 151 150 151 151 149 149 150 127 127 126
+44 44 45 2 2 2
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 2 2 2 1 1 1 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 7 7 7 21 21 22 25 25 26
+25 25 26 24 24 24 20 20 20 23 23 24 25 25 26 26 26 27
+26 26 27 26 26 27 26 26 27 26 26 27 26 26 27 26 26 27
+26 26 27 26 26 27 26 26 27 26 26 27 26 26 27 26 27 27
+28 28 29 26 27 27 26 26 27 26 26 27 26 26 27 26 26 27
+26 26 27 26 26 27 26 26 27 26 26 27 26 26 27 26 26 27
+26 26 27 26 26 27 26 26 27 26 26 27 26 26 27 26 26 27
+26 26 27 26 26 27 26 26 27 26 26 27 25 25 26 21 21 22
+7 7 7 0 0 0
diff --git a/drivers/video/logo/logo_blackfin_vga16.ppm b/drivers/video/logo/logo_blackfin_vga16.ppm
new file mode 100644
index 0000000..1352b02
--- /dev/null
+++ b/drivers/video/logo/logo_blackfin_vga16.ppm
@@ -0,0 +1,1127 @@
+P3
+# This was generated by the GIMP & Netpbm tools
+# gimp linux_bf.svg (create 80x80 save as linux_bf.ppm)
+# ppmquant -mapfile clut_vga16.ppm linux_bf.ppm | pnmnoraw > logo_blackfin_vga16.ppm
+#
+80 80
+255
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85 85
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 85 85 85
+85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+85 85 85 85 85 85 85 85 85 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 85 85 85 85 85 85 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 85 85 85 85 85 85 85 85 85 0 0 0 0 0 0
+85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 170 170 170 170 170 170 85 85 85 0 0 0 0 0 0
+0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 85 85 85 85 85 85 0 0 0 0 0 0 0 0 0
+0 0 0 85 85 85 85 85 85 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 85 85 85 85 85 85 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 85 85 85
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 170 170 170
+170 170 170 85 85 85 85 85 85 170 170 170 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 170 170 170 170 170 170 170 170 170 85 85 85 85 85 85
+0 0 0 0 0 0 0 0 0 85 85 85 170 170 170 255 255 255
+255 255 255 255 255 255 170 170 170 85 85 85 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+170 170 170 255 255 255 255 255 255 255 255 255 255 255 255 0 0 0
+0 0 0 0 0 0 0 0 0 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 170 170 170 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+255 255 255 170 170 170 85 85 85 170 170 170 255 255 255 255 255 255
+0 0 0 0 0 0 170 170 170 255 255 255 255 255 255 85 85 85
+85 85 85 170 170 170 255 255 255 255 255 255 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+255 255 255 85 85 85 170 170 170 170 170 170 255 255 255 255 255 255
+85 85 85 85 85 85 170 170 170 255 255 255 170 170 170 0 0 0
+170 170 170 170 170 170 255 255 255 255 255 255 85 85 85 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+255 255 255 0 0 0 85 85 85 170 170 170 170 170 170 255 255 255
+0 0 0 85 85 85 85 85 85 255 255 255 85 85 85 0 0 0
+0 0 0 85 85 85 170 170 170 255 255 255 85 85 85 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+255 255 255 85 85 85 0 0 0 0 0 0 255 85 85 255 255 85
+255 255 85 255 255 85 255 255 85 255 255 85 85 85 85 0 0 0
+0 0 0 0 0 0 170 170 170 255 255 255 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+170 170 170 255 255 255 0 0 0 255 85 85 170 85 0 170 85 0
+255 255 85 255 255 85 170 85 0 255 255 85 255 255 85 255 255 85
+0 0 0 85 85 85 255 255 255 255 255 255 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 255 255 255 255 85 85 255 255 85 255 255 85 255 255 85
+255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 255 255 85
+255 255 85 255 255 85 255 255 85 170 170 170 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 255 85 85 255 255 85 255 255 85 255 255 85 255 255 85
+255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 255 255 85
+255 255 85 255 255 85 255 255 85 255 255 85 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+170 85 0 255 255 85 255 255 85 255 255 85 255 255 85 255 255 85
+255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 255 255 85
+255 255 85 170 85 0 85 85 85 255 255 85 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+255 85 85 255 255 85 255 255 85 255 255 85 255 255 85 255 255 85
+255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 255 255 85
+170 85 0 85 85 85 255 255 85 255 255 85 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 85 85 85
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+170 85 0 170 85 0 255 255 85 255 255 85 255 255 85 255 255 85
+255 255 85 255 255 85 255 255 85 255 255 85 170 85 0 170 85 0
+170 85 0 255 255 85 255 255 85 255 85 85 0 0 0 0 0 0
+85 85 85 85 85 85 85 85 85 0 0 0 0 0 0 85 85 85
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+85 85 85 170 85 0 170 85 0 170 85 0 255 255 85 255 255 85
+255 255 85 255 85 85 170 85 0 170 85 0 170 85 0 255 255 85
+255 255 85 255 255 85 255 85 85 170 170 170 0 0 0 0 0 0
+85 85 85 85 85 85 85 85 85 85 85 85 0 0 0 85 85 85
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+85 85 85 170 170 170 170 85 0 170 85 0 170 85 0 170 85 0
+170 85 0 170 85 0 170 85 0 255 255 85 255 255 85 255 255 85
+255 85 85 170 170 170 255 255 255 255 255 255 85 85 85 0 0 0
+0 0 0 85 85 85 85 85 85 85 85 85 0 0 0 0 0 0
+85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+170 170 170 170 170 170 170 170 170 170 85 0 255 255 85 255 255 85
+255 255 85 255 255 85 255 255 85 255 255 85 255 85 85 170 170 170
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 0 0 0
+0 0 0 0 0 0 85 85 85 85 85 85 0 0 0 0 0 0
+85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+170 170 170 255 255 255 255 255 255 170 170 170 170 85 0 255 85 85
+255 85 85 255 85 85 255 85 85 255 85 85 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 85 85 85
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
+170 170 170 255 255 255 255 255 255 170 170 170 170 170 170 170 170 170
+170 170 170 170 170 170 170 170 170 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 85 85 85 85 85 85 0 0 0 0 0 0
+255 255 255 255 255 255 255 255 255 255 255 255 170 170 170 170 170 170
+170 170 170 170 170 170 255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
+170 170 170 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 85 85 85 0 0 0 0 0 0 170 170 170 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+85 85 85 0 0 0 0 0 0 0 0 0 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 170 170 170 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
+85 85 85 0 0 0 0 0 0 85 85 85 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
+0 0 0 0 0 0 0 0 0 170 170 170 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 85 85 85 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
+85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 0 0 0 0 0 0 170 170 170 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 170 170 170 170 170 170 170 170 170 170 170 170
+170 170 170 255 255 255 255 255 255 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 0 0 0 85 85 85 170 170 170 170 170 170 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 170 170 170 170 170 170 170 170 170 170 170 170
+170 170 170 170 170 170 255 255 255 0 0 0 0 0 0 85 85 85
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
+0 0 0 0 0 0 170 170 170 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 170 170 170
+170 170 170 170 170 170 170 170 170 255 255 255 0 0 0 85 85 85
+85 85 85 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 85 85 85 85 85 85 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
+0 0 0 0 0 0 255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 170 170 170 170 170 170 255 255 255 0 0 0 0 0 0
+0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 85 85 85 0 0 0 0 0 0 85 85 85
+0 0 0 170 170 170 255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 170 170 170 85 85 85 170 170 170 170 170 170 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 170 170 170 170 170 170 255 255 255 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 85 85 85 85 85 85 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 85 85 85 0 0 0 85 85 85 0 0 0
+0 0 0 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
+170 170 170 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 0 0 0
+0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 85 85 85 0 0 0 0 0 0 85 85 85 0 0 0
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 85 85 85 170 170 170 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 170 170 170
+0 0 0 85 85 85 0 0 0 85 85 85 85 85 85 0 0 0
+0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 85 85 85 0 0 0 85 85 85 85 85 85 85 85 85
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 170 170 170 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 170 170 170 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 85 85 85 0 0 0 85 85 85 0 0 0 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 85 85 85 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 170 170 170 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 170 170 170
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 85 85 85 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+170 170 170 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
+0 0 0 0 0 0 0 0 0 0 0 0 170 170 170 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 170 170 170 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 170 170 170 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 170 170 170 255 255 255 255 255 255 255 255 255 255 255 255
+85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
+0 0 0 0 0 0 85 85 85 0 0 0 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 170 170 170 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 170 170 170 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 170 170 170 255 255 255 255 255 255 255 255 255
+170 170 170 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 0 0 0 85 85 85 0 0 0 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 170 170 170 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 170 170 170 255 255 255 255 255 255
+170 170 170 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
+85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 0 0 0 85 85 85 0 0 0 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 170 170 170 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 170 170 170 255 255 255
+170 170 170 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 0 0 0 85 85 85 0 0 0 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 170 170 170 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 170 170 170
+170 170 170 0 0 0 0 0 0 85 85 85 85 85 85 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 0 0 0
+0 0 0 0 0 0 85 85 85 85 85 85 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 170 170 170 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 85 85 85 170 170 170 170 170 170 255 255 255 255 255 255
+170 170 170 0 0 0 0 0 0 85 85 85 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 170 85 0
+255 255 85 255 255 85 0 0 0 85 85 85 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 170 170 170 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
+170 170 170 170 170 170 170 170 170 85 85 85 0 0 0 85 85 85
+85 85 85 85 85 85 0 0 0 0 0 0 0 0 0 85 85 85
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 255 255 85 255 255 85
+255 255 85 255 255 85 255 255 85 85 85 85 170 170 170 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 170 170 170 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 170 170 170 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 85 170 170 170
+85 85 85 170 170 170 170 170 170 85 85 85 0 0 0 0 0 0
+0 0 0 85 85 85 170 170 170 0 0 0 0 0 0 85 85 85
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
+170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170
+85 85 85 0 0 0 0 0 0 170 85 0 255 255 85 255 255 85
+255 255 85 255 255 85 255 255 85 255 255 85 170 85 0 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 170 170 170 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 85 85 85 0 0 0
+0 0 0 0 0 0 0 0 0 170 170 170 255 255 255 255 255 255
+255 255 255 255 255 255 170 170 170 170 170 170 170 170 170 170 170 170
+255 255 255 85 85 85 0 0 0 170 170 170 85 85 85 0 0 0
+0 0 0 0 0 0 85 85 85 0 0 0 255 255 85 85 85 85
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 170 170 170
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
+170 170 170 0 0 0 85 85 85 255 255 85 255 255 85 255 255 85
+255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 0 0 0
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 85 85 85 0 0 0
+0 0 0 0 0 0 85 85 85 255 255 255 255 255 255 255 255 255
+170 170 170 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 170 170 170 85 85 85
+0 0 0 0 0 0 0 0 0 255 255 85 255 255 85 255 255 85
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 170 170 170
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+170 170 170 170 170 170 255 255 85 255 255 85 255 255 85 255 255 85
+255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 255 255 85
+0 0 0 170 170 170 255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 0 0 0 0 0 0
+0 0 0 0 0 0 255 255 255 255 255 255 255 255 255 170 170 170
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 170 170 170
+85 85 85 0 0 0 255 255 85 255 255 85 255 255 85 255 255 85
+85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 170 170 170
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+170 170 170 170 170 170 170 170 170 170 170 170 255 255 85 255 255 85
+255 255 85 255 255 85 170 170 170 170 170 170 170 170 170 170 170 170
+255 255 85 85 85 85 170 170 170 170 170 170 170 170 170 170 170 170
+255 255 255 255 255 255 170 170 170 170 170 170 170 170 170 255 255 255
+255 255 255 170 170 170 170 170 170 255 255 255 0 0 0 0 0 0
+0 0 0 85 85 85 255 255 255 255 255 255 255 255 255 85 85 85
+85 85 85 170 170 170 170 170 170 85 85 85 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
+170 170 170 170 170 170 255 255 85 255 255 85 255 255 85 255 255 85
+85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 170 170 170 85 85 85
+0 0 0 0 0 0 255 255 255 85 85 85 0 0 0 0 0 0
+255 255 255 85 85 85 0 0 0 0 0 0 255 255 255 255 255 85
+255 255 85 170 170 170 0 0 0 0 0 0 0 0 0 170 170 170
+255 255 255 170 170 170 85 85 85 0 0 0 0 0 0 0 0 0
+170 170 170 255 255 255 85 85 85 0 0 0 85 85 85 255 255 255
+85 85 85 0 0 0 85 85 85 255 255 255 0 0 0 0 0 0
+0 0 0 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 85 85 85 0 0 0 0 0 0 85 85 85
+85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+85 85 85 255 255 255 255 255 85 255 255 85 255 255 85 255 255 85
+85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 85 85 85 170 170 170 0 0 0
+0 0 0 85 85 85 255 255 255 0 0 0 0 0 0 85 85 85
+255 255 255 0 0 0 0 0 0 85 85 85 255 255 85 255 255 85
+255 255 85 85 85 85 0 0 0 0 0 0 0 0 0 170 170 170
+255 255 255 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
+85 85 85 255 255 255 0 0 0 0 0 0 170 170 170 170 170 170
+0 0 0 0 0 0 255 255 255 255 255 255 0 0 0 85 85 85
+255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 85 85 85 0 0 0 85 85 85 255 255 255 255 255 255
+85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 85 85 85 255 255 255 255 255 85 255 255 85 255 255 85
+255 255 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 85 85 85 170 170 170 0 0 0
+0 0 0 85 85 85 170 170 170 0 0 0 0 0 0 170 170 170
+170 170 170 0 0 0 0 0 0 170 170 170 255 255 85 255 255 85
+255 255 255 0 0 0 85 85 85 85 85 85 0 0 0 170 170 170
+255 255 255 0 0 0 0 0 0 170 170 170 85 85 85 0 0 0
+85 85 85 170 170 170 0 0 0 0 0 0 170 170 170 0 0 0
+0 0 0 170 170 170 255 255 255 255 255 255 255 255 255 255 255 255
+255 255 255 255 255 255 255 255 255 255 255 255 170 170 170 170 170 170
+85 85 85 0 0 0 85 85 85 255 255 255 255 255 255 170 170 170
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 85 85 85 255 255 255 255 255 85 255 255 85
+255 255 85 170 85 0 0 0 0 85 85 85 85 85 85 85 85 85
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 85 85 85 170 170 170 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 255 255 255
+170 170 170 0 0 0 0 0 0 170 170 170 255 255 85 255 255 85
+170 170 170 0 0 0 170 170 170 85 85 85 0 0 0 255 255 255
+170 170 170 0 0 0 0 0 0 255 255 255 0 0 0 0 0 0
+170 170 170 170 170 170 0 0 0 0 0 0 85 85 85 0 0 0
+85 85 85 255 255 255 255 255 255 255 255 255 255 255 255 170 170 170
+255 255 255 255 255 255 255 255 255 85 85 85 0 0 0 0 0 0
+0 0 0 0 0 0 170 170 170 255 255 255 170 170 170 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 85 85 85 255 255 255 255 255 85
+255 255 85 255 255 85 255 255 255 170 170 170 170 170 170 255 255 255
+85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 170 170 170 85 85 85 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 255 255 255 255 255 255
+85 85 85 0 0 0 0 0 0 255 255 255 255 255 85 255 255 85
+85 85 85 0 0 0 255 255 255 85 85 85 0 0 0 255 255 255
+85 85 85 0 0 0 85 85 85 255 255 255 85 85 85 85 85 85
+255 255 255 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
+255 255 255 255 255 255 255 255 255 170 170 170 0 0 0 85 85 85
+255 255 255 255 255 255 255 255 255 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 255 255 255
+170 170 170 0 0 0 0 0 0 0 0 0 170 170 170 255 255 255
+255 255 85 255 255 85 170 170 170 170 170 170 170 170 170 170 170 170
+170 170 170 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 85 85 85 170 170 170 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 255 255 255
+0 0 0 0 0 0 85 85 85 255 255 85 255 255 85 255 255 255
+0 0 0 85 85 85 255 255 255 0 0 0 85 85 85 255 255 255
+85 85 85 0 0 0 170 170 170 255 255 255 170 170 170 170 170 170
+255 255 255 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
+255 255 255 255 255 255 255 255 255 170 170 170 0 0 0 170 170 170
+255 255 255 255 255 255 85 85 85 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 170 170 170 255 255 255 255 255 255
+170 170 170 0 0 0 85 85 85 85 85 85 0 0 0 170 170 170
+255 255 85 255 255 85 255 255 255 170 170 170 170 170 170 170 170 170
+85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 85 85 85 170 170 170 0 0 0 0 0 0
+85 85 85 170 170 170 0 0 0 0 0 0 85 85 85 170 170 170
+0 0 0 0 0 0 170 170 170 255 255 85 255 255 85 170 170 170
+0 0 0 85 85 85 170 170 170 0 0 0 85 85 85 255 255 255
+0 0 0 0 0 0 170 170 170 170 170 170 170 170 170 255 255 255
+170 170 170 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
+255 255 255 255 255 255 255 255 255 85 85 85 0 0 0 255 255 255
+255 255 255 255 255 255 0 0 0 0 0 0 0 0 0 0 0 0
+85 85 85 255 255 255 255 255 255 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 170 170 170 255 255 255 255 255 85 255 255 255
+85 85 85 170 170 170 255 255 255 255 255 255 170 170 170 0 0 0
+170 170 170 255 255 85 255 255 85 255 255 255 170 170 170 255 255 255
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 85 85 85 170 170 170 0 0 0 0 0 0
+170 170 170 170 170 170 0 0 0 0 0 0 85 85 85 170 170 170
+0 0 0 0 0 0 170 170 170 255 255 85 255 255 255 85 85 85
+0 0 0 85 85 85 85 85 85 0 0 0 85 85 85 170 170 170
+0 0 0 0 0 0 255 255 255 85 85 85 0 0 0 170 170 170
+170 170 170 0 0 0 0 0 0 85 85 85 0 0 0 85 85 85
+255 255 255 255 255 255 255 255 255 85 85 85 85 85 85 255 255 255
+255 255 255 85 85 85 0 0 0 0 0 0 0 0 0 170 170 170
+170 170 170 170 170 170 255 255 255 0 0 0 0 0 0 0 0 0
+0 0 0 170 170 170 255 255 255 255 255 255 255 255 85 170 170 170
+255 255 255 255 255 255 255 255 85 255 255 85 170 170 170 0 0 0
+0 0 0 170 170 170 255 255 85 255 255 85 255 255 85 255 255 85
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 170 170 170 85 85 85 0 0 0 0 0 0
+255 255 255 85 85 85 0 0 0 0 0 0 170 170 170 85 85 85
+0 0 0 0 0 0 255 255 255 255 255 85 255 255 255 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 170 170 170 85 85 85
+0 0 0 85 85 85 255 255 255 0 0 0 0 0 0 255 255 255
+85 85 85 0 0 0 85 85 85 85 85 85 0 0 0 0 0 0
+255 255 255 255 255 255 255 255 255 85 85 85 170 170 170 255 255 255
+255 255 255 0 0 0 0 0 0 0 0 0 170 170 170 255 255 255
+170 170 170 85 85 85 170 170 170 0 0 0 0 0 0 85 85 85
+255 255 255 170 170 170 0 0 0 170 170 170 255 255 85 255 255 255
+255 255 255 170 170 170 255 255 255 255 255 255 85 85 85 0 0 0
+85 85 85 255 255 255 255 255 255 255 255 85 255 255 85 255 255 85
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 85 85 85 170 170 170 0 0 0 0 0 0 0 0 0
+85 85 85 0 0 0 0 0 0 0 0 0 255 255 255 0 0 0
+0 0 0 85 85 85 170 170 170 255 255 255 170 170 170 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 170 170 170 85 85 85
+0 0 0 85 85 85 170 170 170 0 0 0 85 85 85 255 255 255
+0 0 0 0 0 0 170 170 170 170 170 170 0 0 0 0 0 0
+255 255 255 255 255 255 255 255 255 0 0 0 255 255 255 255 255 255
+170 170 170 0 0 0 0 0 0 170 170 170 255 255 255 85 85 85
+170 170 170 170 170 170 170 170 170 0 0 0 85 85 85 255 255 255
+170 170 170 0 0 0 85 85 85 255 255 255 255 255 85 170 170 170
+0 0 0 170 170 170 255 255 255 255 255 255 0 0 0 85 85 85
+255 255 255 170 170 170 0 0 0 170 170 170 255 255 85 85 85 85
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 85 85 85 170 170 170 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 170 170 170 170 170 170 0 0 0
+0 0 0 0 0 0 0 0 0 170 170 170 85 85 85 0 0 0
+170 170 170 255 255 255 0 0 0 0 0 0 170 170 170 85 85 85
+0 0 0 0 0 0 0 0 0 0 0 0 170 170 170 170 170 170
+0 0 0 0 0 0 255 255 255 170 170 170 0 0 0 0 0 0
+255 255 255 255 255 255 170 170 170 85 85 85 255 255 255 255 255 255
+85 85 85 0 0 0 170 170 170 170 170 170 0 0 0 0 0 0
+170 170 170 170 170 170 255 255 255 255 255 255 255 255 255 85 85 85
+0 0 0 0 0 0 255 255 255 255 255 255 170 170 170 0 0 0
+0 0 0 170 170 170 255 255 255 170 170 170 170 170 170 255 255 255
+85 85 85 0 0 0 0 0 0 0 0 0 170 170 170 85 85 85
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 85 85 85 170 170 170 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 170 170 170 255 255 255 170 170 170 0 0 0
+0 0 0 0 0 0 0 0 0 255 255 255 0 0 0 0 0 0
+255 255 255 255 255 255 0 0 0 0 0 0 255 255 255 170 170 170
+0 0 0 0 0 0 0 0 0 170 170 170 255 255 255 170 170 170
+0 0 0 0 0 0 255 255 255 170 170 170 0 0 0 0 0 0
+170 170 170 255 255 255 170 170 170 170 170 170 170 170 170 170 170 170
+0 0 0 85 85 85 85 85 85 0 0 0 0 0 0 0 0 0
+85 85 85 255 255 255 255 255 255 170 170 170 0 0 0 0 0 0
+0 0 0 170 170 170 255 255 255 170 170 170 0 0 0 0 0 0
+85 85 85 255 255 255 255 255 85 255 255 255 255 255 255 85 85 85
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 170 170 170
+85 85 85 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 85 85 85 170 170 170 170 170 170 170 170 170 170 170 170
+170 170 170 170 170 170 255 255 85 255 255 85 255 255 85 170 170 170
+170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170
+255 255 85 170 170 170 170 170 170 170 170 170 255 255 85 255 255 85
+170 170 170 170 170 170 170 170 170 255 255 85 255 255 85 170 170 170
+170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170
+170 170 170 170 170 170 85 85 85 170 170 170 170 170 170 170 170 170
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
+85 85 85 255 255 255 170 170 170 0 0 0 0 0 0 0 0 0
+0 0 0 255 255 255 255 255 255 255 255 255 85 85 85 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
+170 170 170 85 85 85 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+85 85 85 85 85 85 255 255 85 255 255 85 255 255 85 255 255 85
+255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 255 255 85
+255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 255 255 85
+255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 255 255 85
+255 255 85 255 85 85 85 85 85 0 0 0 0 0 0 0 0 0
+85 85 85 170 170 170 85 85 85 170 170 170 170 170 170 85 85 85
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+85 85 85 170 170 170 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 85 85 85 170 170 170 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+85 85 85 170 170 170 85 85 85 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 85 85 85 85 85 85 170 85 0 170 85 0
+170 85 0 255 85 85 255 85 85 255 85 85 255 255 85 255 255 85
+255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 255 255 85
+255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 255 255 85
+255 85 85 170 85 0 85 85 85 0 0 0 0 0 0 85 85 85
+170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 170 170 170 170 170 170 85 85 85 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 85 85 85
+85 85 85 85 85 85 170 85 0 170 85 0 170 85 0 170 85 0
+255 85 85 255 85 85 255 255 85 255 255 85 255 255 85 255 255 85
+255 255 85 255 255 85 255 255 85 255 255 85 255 255 85 255 85 85
+170 85 0 170 85 0 0 0 0 85 85 85 85 85 85 170 170 170
+170 170 170 0 0 0 170 170 170 255 255 255 170 170 170 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 170 170 170 170 170 170 0 0 0 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 85 85 85
+170 85 0 170 85 0 170 85 0 255 85 85 255 85 85 255 255 85
+255 255 85 255 255 85 255 255 85 255 255 85 255 85 85 170 85 0
+170 85 0 85 85 85 85 85 85 85 85 85 170 170 170 170 170 170
+0 0 0 0 0 0 255 255 255 255 255 255 85 85 85 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 170 170 170 85 85 85 0 0 0
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 85 85 85 85 85 85 170 85 0 170 85 0 170 85 0
+170 85 0 255 85 85 255 85 85 255 85 85 170 85 0 170 85 0
+85 85 85 0 0 0 0 0 0 85 85 85 170 170 170 0 0 0
+0 0 0 85 85 85 255 255 255 170 170 170 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 170 170 170 85 85 85
+0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 85 85 85
+170 85 0 170 85 0 170 85 0 170 85 0 170 85 0 85 85 85
+0 0 0 0 0 0 0 0 0 85 85 85 170 170 170 0 0 0
+0 0 0 85 85 85 255 255 255 170 170 170 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 85 85 85 170 170 170
+85 85 85 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 85 85 85 85 85 85 85 85 85 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 85 85 85 85 85 85 170 170 170
+170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170
+170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170
+170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170
+170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170
+170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170
+170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 170
+170 170 170 170 170 170 170 170 170 170 170 170 170 170 170 85 85 85
+85 85 85 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+0 0 0 0 0 0
diff --git a/drivers/video/matrox/matroxfb_base.h b/drivers/video/matrox/matroxfb_base.h
index f3107ad..9588323 100644
--- a/drivers/video/matrox/matroxfb_base.h
+++ b/drivers/video/matrox/matroxfb_base.h
@@ -200,7 +200,7 @@
virt->vaddr = ioremap_nocache(phys, size);
else
virt->vaddr = ioremap(phys, size);
- return (virt->vaddr == 0); /* 0, !0... 0, error_code in future */
+ return (virt->vaddr == NULL); /* 0, !0... 0, error_code in future */
}
static inline void mga_iounmap(vaddr_t va) {
diff --git a/drivers/video/modedb.c b/drivers/video/modedb.c
index 4735621..d3c3af5 100644
--- a/drivers/video/modedb.c
+++ b/drivers/video/modedb.c
@@ -28,6 +28,7 @@
#endif
const char *fb_mode_option;
+EXPORT_SYMBOL_GPL(fb_mode_option);
/*
* Standard video mode definitions (taken from XFree86)
@@ -590,6 +591,7 @@
"", (margins) ? " with margins" : "", (interlace) ?
" interlaced" : "");
+ memset(&cvt_mode, 0, sizeof(cvt_mode));
cvt_mode.xres = xres;
cvt_mode.yres = yres;
cvt_mode.refresh = (refresh) ? refresh : 60;
diff --git a/drivers/video/pnx4008/pnxrgbfb.c b/drivers/video/pnx4008/pnxrgbfb.c
index 685761a..4db6b48 100644
--- a/drivers/video/pnx4008/pnxrgbfb.c
+++ b/drivers/video/pnx4008/pnxrgbfb.c
@@ -100,7 +100,6 @@
fb_dealloc_cmap(&info->cmap);
framebuffer_release(info);
platform_set_drvdata(pdev, NULL);
- kfree(info);
}
pnx4008_free_dum_channel(channel_owned, pdev->id);
@@ -168,23 +167,21 @@
ret = fb_alloc_cmap(&info->cmap, 256, 0);
if (ret < 0)
- goto err2;
+ goto err1;
ret = register_framebuffer(info);
if (ret < 0)
- goto err3;
+ goto err2;
platform_set_drvdata(pdev, info);
return 0;
-err3:
- fb_dealloc_cmap(&info->cmap);
err2:
- framebuffer_release(info);
+ fb_dealloc_cmap(&info->cmap);
err1:
pnx4008_free_dum_channel(channel_owned, pdev->id);
err0:
- kfree(info);
+ framebuffer_release(info);
err:
return ret;
}
diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c
index 48aea39..7dcda18 100644
--- a/drivers/video/pxafb.c
+++ b/drivers/video/pxafb.c
@@ -355,9 +355,8 @@
}
#ifdef CONFIG_CPU_FREQ
- pr_debug("pxafb: dma period = %d ps, clock = %d kHz\n",
- pxafb_display_dma_period(var),
- get_clk_frequency_khz(0));
+ pr_debug("pxafb: dma period = %d ps\n",
+ pxafb_display_dma_period(var));
#endif
return 0;
@@ -574,8 +573,8 @@
dma_desc->fdadr = fbi->dma_buff_phys + dma_desc_off;
fbi->fdadr[dma] = fbi->dma_buff_phys + dma_desc_off;
} else {
- pal_desc = &fbi->dma_buff->pal_desc[dma];
- pal_desc_off = offsetof(struct pxafb_dma_buff, dma_desc[pal]);
+ pal_desc = &fbi->dma_buff->pal_desc[pal];
+ pal_desc_off = offsetof(struct pxafb_dma_buff, pal_desc[pal]);
pal_desc->fsadr = fbi->dma_buff_phys + pal * PALETTE_SIZE;
pal_desc->fidr = 0;
@@ -1277,6 +1276,8 @@
fbi->dma_buff_phys = fbi->map_dma;
fbi->palette_cpu = (u16 *) fbi->dma_buff->palette;
+ pr_debug("pxafb: palette_mem_size = 0x%08lx\n", fbi->palette_size*sizeof(u16));
+
#ifdef CONFIG_FB_PXA_SMARTPANEL
fbi->smart_cmds = (uint16_t *) fbi->dma_buff->cmd_buff;
fbi->n_smart_cmds = 0;
@@ -1352,7 +1353,6 @@
struct pxafb_info *fbi;
void *addr;
struct pxafb_mach_info *inf = dev->platform_data;
- struct pxafb_mode_info *mode = inf->modes;
/* Alloc the pxafb_info and pseudo_palette in one step */
fbi = kmalloc(sizeof(struct pxafb_info) + sizeof(u32) * 16, GFP_KERNEL);
diff --git a/drivers/video/s3c2410fb.c b/drivers/video/s3c2410fb.c
index 13b38cb..f059896 100644
--- a/drivers/video/s3c2410fb.c
+++ b/drivers/video/s3c2410fb.c
@@ -1,75 +1,15 @@
-/*
- * linux/drivers/video/s3c2410fb.c
- * Copyright (c) Arnaud Patard, Ben Dooks
+/* linux/drivers/video/s3c2410fb.c
+ * Copyright (c) 2004,2005 Arnaud Patard
+ * Copyright (c) 2004-2008 Ben Dooks
+ *
+ * S3C2410 LCD Framebuffer Driver
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive for
* more details.
*
- * S3C2410 LCD Controller Frame Buffer Driver
- * based on skeletonfb.c, sa1100fb.c and others
- *
- * ChangeLog
- * 2005-04-07: Arnaud Patard <arnaud.patard@rtp-net.org>
- * - u32 state -> pm_message_t state
- * - S3C2410_{VA,SZ}_LCD -> S3C24XX
- *
- * 2005-03-15: Arnaud Patard <arnaud.patard@rtp-net.org>
- * - Removed the ioctl
- * - use readl/writel instead of __raw_writel/__raw_readl
- *
- * 2004-12-04: Arnaud Patard <arnaud.patard@rtp-net.org>
- * - Added the possibility to set on or off the
- * debugging messages
- * - Replaced 0 and 1 by on or off when reading the
- * /sys files
- *
- * 2005-03-23: Ben Dooks <ben-linux@fluff.org>
- * - added non 16bpp modes
- * - updated platform information for range of x/y/bpp
- * - add code to ensure palette is written correctly
- * - add pixel clock divisor control
- *
- * 2004-11-11: Arnaud Patard <arnaud.patard@rtp-net.org>
- * - Removed the use of currcon as it no more exists
- * - Added LCD power sysfs interface
- *
- * 2004-11-03: Ben Dooks <ben-linux@fluff.org>
- * - minor cleanups
- * - add suspend/resume support
- * - s3c2410fb_setcolreg() not valid in >8bpp modes
- * - removed last CONFIG_FB_S3C2410_FIXED
- * - ensure lcd controller stopped before cleanup
- * - added sysfs interface for backlight power
- * - added mask for gpio configuration
- * - ensured IRQs disabled during GPIO configuration
- * - disable TPAL before enabling video
- *
- * 2004-09-20: Arnaud Patard <arnaud.patard@rtp-net.org>
- * - Suppress command line options
- *
- * 2004-09-15: Arnaud Patard <arnaud.patard@rtp-net.org>
- * - code cleanup
- *
- * 2004-09-07: Arnaud Patard <arnaud.patard@rtp-net.org>
- * - Renamed from h1940fb.c to s3c2410fb.c
- * - Add support for different devices
- * - Backlight support
- *
- * 2004-09-05: Herbert Pötzl <herbert@13thfloor.at>
- * - added clock (de-)allocation code
- * - added fixem fbmem option
- *
- * 2004-07-27: Arnaud Patard <arnaud.patard@rtp-net.org>
- * - code cleanup
- * - added a forgotten return in h1940fb_init
- *
- * 2004-07-19: Herbert Pötzl <herbert@13thfloor.at>
- * - code cleanup and extended debugging
- *
- * 2004-07-15: Arnaud Patard <arnaud.patard@rtp-net.org>
- * - First version
- */
+ * Driver based on skeletonfb.c, sa1100fb.c and others.
+*/
#include <linux/module.h>
#include <linux/kernel.h>
@@ -580,6 +520,27 @@
return 0;
}
+/* s3c2410fb_lcd_enable
+ *
+ * shutdown the lcd controller
+ */
+static void s3c2410fb_lcd_enable(struct s3c2410fb_info *fbi, int enable)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+
+ if (enable)
+ fbi->regs.lcdcon1 |= S3C2410_LCDCON1_ENVID;
+ else
+ fbi->regs.lcdcon1 &= ~S3C2410_LCDCON1_ENVID;
+
+ writel(fbi->regs.lcdcon1, fbi->io + S3C2410_LCDCON1);
+
+ local_irq_restore(flags);
+}
+
+
/*
* s3c2410fb_blank
* @blank_mode: the blank mode we want.
@@ -589,9 +550,6 @@
* blanking succeeded, != 0 if un-/blanking failed due to e.g. a
* video mode which doesn't support it. Implements VESA suspend
* and powerdown modes on hardware that supports disabling hsync/vsync:
- * blank_mode == 2: suspend vsync
- * blank_mode == 3: suspend hsync
- * blank_mode == 4: powerdown
*
* Returns negative errno on error, or zero on success.
*
@@ -605,6 +563,12 @@
tpal_reg += is_s3c2412(fbi) ? S3C2412_TPAL : S3C2410_TPAL;
+ if (blank_mode == FB_BLANK_POWERDOWN) {
+ s3c2410fb_lcd_enable(fbi, 0);
+ } else {
+ s3c2410fb_lcd_enable(fbi, 1);
+ }
+
if (blank_mode == FB_BLANK_UNBLANK)
writel(0x0, tpal_reg);
else {
@@ -948,7 +912,10 @@
}
/* create device files */
- device_create_file(&pdev->dev, &dev_attr_debug);
+ ret = device_create_file(&pdev->dev, &dev_attr_debug);
+ if (ret) {
+ printk(KERN_ERR "failed to add debug attribute\n");
+ }
printk(KERN_INFO "fb%d: %s frame buffer device\n",
fbinfo->node, fbinfo->fix.id);
@@ -983,21 +950,6 @@
return s3c24xxfb_probe(pdev, DRV_S3C2412);
}
-/* s3c2410fb_stop_lcd
- *
- * shutdown the lcd controller
- */
-static void s3c2410fb_stop_lcd(struct s3c2410fb_info *fbi)
-{
- unsigned long flags;
-
- local_irq_save(flags);
-
- fbi->regs.lcdcon1 &= ~S3C2410_LCDCON1_ENVID;
- writel(fbi->regs.lcdcon1, fbi->io + S3C2410_LCDCON1);
-
- local_irq_restore(flags);
-}
/*
* Cleanup
@@ -1010,7 +962,7 @@
unregister_framebuffer(fbinfo);
- s3c2410fb_stop_lcd(info);
+ s3c2410fb_lcd_enable(info, 0);
msleep(1);
s3c2410fb_unmap_video_memory(fbinfo);
@@ -1043,7 +995,7 @@
struct fb_info *fbinfo = platform_get_drvdata(dev);
struct s3c2410fb_info *info = fbinfo->par;
- s3c2410fb_stop_lcd(info);
+ s3c2410fb_lcd_enable(info, 0);
/* sleep before disabling the clock, we need to ensure
* the LCD DMA engine is not going to get back on the bus
@@ -1118,3 +1070,5 @@
"Ben Dooks <ben-linux@fluff.org>");
MODULE_DESCRIPTION("Framebuffer driver for the s3c2410");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:s3c2410-lcd");
+MODULE_ALIAS("platform:s3c2412-lcd");
diff --git a/drivers/video/s3c2410fb.h b/drivers/video/s3c2410fb.h
index dbb73b9..9a6ba3e 100644
--- a/drivers/video/s3c2410fb.h
+++ b/drivers/video/s3c2410fb.h
@@ -1,26 +1,14 @@
/*
* linux/drivers/video/s3c2410fb.h
- * Copyright (c) Arnaud Patard
+ * Copyright (c) 2004 Arnaud Patard
+ *
+ * S3C2410 LCD Framebuffer Driver
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive for
* more details.
*
- * S3C2410 LCD Controller Frame Buffer Driver
- * based on skeletonfb.c, sa1100fb.h
- *
- * ChangeLog
- *
- * 2004-12-04: Arnaud Patard <arnaud.patard@rtp-net.org>
- * - Moved dprintk to s3c2410fb.c
- *
- * 2004-09-07: Arnaud Patard <arnaud.patard@rtp-net.org>
- * - Renamed from h1940fb.h to s3c2410fb.h
- * - Changed h1940 to s3c2410
- *
- * 2004-07-15: Arnaud Patard <arnaud.patard@rtp-net.org>
- * - First version
- */
+*/
#ifndef __S3C2410FB_H
#define __S3C2410FB_H
diff --git a/drivers/video/sis/sis_main.c b/drivers/video/sis/sis_main.c
index 7380362..b934384 100644
--- a/drivers/video/sis/sis_main.c
+++ b/drivers/video/sis/sis_main.c
@@ -5787,7 +5787,7 @@
} else {
struct sis_video_info *countvideo = card_list;
ivideo->cardnumber = 1;
- while((countvideo = countvideo->next) != 0)
+ while((countvideo = countvideo->next) != NULL)
ivideo->cardnumber++;
}
diff --git a/drivers/video/sm501fb.c b/drivers/video/sm501fb.c
index 742b5c6..15d4a76 100644
--- a/drivers/video/sm501fb.c
+++ b/drivers/video/sm501fb.c
@@ -663,14 +663,14 @@
sm501fb_sync_regs(fbi);
mdelay(10);
- if (pd->flags & SM501FB_FLAG_PANEL_USE_VBIASEN) {
+ if (!(pd->flags & SM501FB_FLAG_PANEL_NO_VBIASEN)) {
control |= SM501_DC_PANEL_CONTROL_BIAS; /* VBIASEN */
writel(control, ctrl_reg);
sm501fb_sync_regs(fbi);
mdelay(10);
}
- if (pd->flags & SM501FB_FLAG_PANEL_USE_FPEN) {
+ if (!(pd->flags & SM501FB_FLAG_PANEL_NO_FPEN)) {
control |= SM501_DC_PANEL_CONTROL_FPEN;
writel(control, ctrl_reg);
sm501fb_sync_regs(fbi);
@@ -678,14 +678,14 @@
}
} else if (!to && (control & SM501_DC_PANEL_CONTROL_VDD) != 0) {
/* disable panel power */
- if (pd->flags & SM501FB_FLAG_PANEL_USE_FPEN) {
+ if (!(pd->flags & SM501FB_FLAG_PANEL_NO_FPEN)) {
control &= ~SM501_DC_PANEL_CONTROL_FPEN;
writel(control, ctrl_reg);
sm501fb_sync_regs(fbi);
mdelay(10);
}
- if (pd->flags & SM501FB_FLAG_PANEL_USE_VBIASEN) {
+ if (!(pd->flags & SM501FB_FLAG_PANEL_NO_VBIASEN)) {
control &= ~SM501_DC_PANEL_CONTROL_BIAS;
writel(control, ctrl_reg);
sm501fb_sync_regs(fbi);
diff --git a/drivers/video/tridentfb.c b/drivers/video/tridentfb.c
index bd54cd0..beefab2 100644
--- a/drivers/video/tridentfb.c
+++ b/drivers/video/tridentfb.c
@@ -27,7 +27,6 @@
#define VERSION "0.7.8-NEWAPI"
struct tridentfb_par {
- int vclk; /* in MHz */
void __iomem *io_virt; /* iospace virtual memory address */
};
@@ -669,27 +668,26 @@
(read3X4(CRTHiOrd) & 0xF8) | ((base & 0xE0000) >> 17));
}
-/* Use 20.12 fixed-point for NTSC value and frequency calculation */
-#define calc_freq(n, m, k) ( ((unsigned long)0xE517 * (n + 8) / ((m + 2) * (1 << k))) >> 12 )
-
/* Set dotclock frequency */
-static void set_vclk(int freq)
+static void set_vclk(unsigned long freq)
{
int m, n, k;
- int f, fi, d, di;
+ unsigned long f, fi, d, di;
unsigned char lo = 0, hi = 0;
- d = 20;
+ d = 20000;
for (k = 2; k >= 0; k--)
for (m = 0; m < 63; m++)
for (n = 0; n < 128; n++) {
- fi = calc_freq(n, m, k);
+ fi = ((14318l * (n + 8)) / (m + 2)) >> k;
if ((di = abs(fi - freq)) < d) {
d = di;
f = fi;
lo = n;
hi = (k << 6) | m;
}
+ if (fi > freq)
+ break;
}
if (chip3D) {
write3C4(ClockHigh, hi);
@@ -888,6 +886,8 @@
struct fb_var_screeninfo *var = &info->var;
int bpp = var->bits_per_pixel;
unsigned char tmp;
+ unsigned long vclk;
+
debug("enter\n");
hdispend = var->xres / 8 - 1;
hsyncstart = (var->xres + var->right_margin) / 8;
@@ -905,7 +905,6 @@
vblankstart = var->yres;
vblankend = vtotal + 2;
- enable_mmio();
crtc_unlock();
write3CE(CyberControl, 8);
@@ -1015,11 +1014,11 @@
write3X4(Performance, 0x92);
write3X4(PCIReg, 0x07); /* MMIO & PCI read and write burst enable */
- /* convert from picoseconds to MHz */
- par->vclk = 1000000 / info->var.pixclock;
+ /* convert from picoseconds to kHz */
+ vclk = PICOS2KHZ(info->var.pixclock);
if (bpp == 32)
- par->vclk *= 2;
- set_vclk(par->vclk);
+ vclk *= 2;
+ set_vclk(vclk);
write3C4(0, 3);
write3C4(1, 1); /* set char clock 8 dots wide */
diff --git a/drivers/virtio/virtio.c b/drivers/virtio/virtio.c
index 1386678..7084e7e 100644
--- a/drivers/virtio/virtio.c
+++ b/drivers/virtio/virtio.c
@@ -2,6 +2,9 @@
#include <linux/spinlock.h>
#include <linux/virtio_config.h>
+/* Unique numbering for virtio devices. */
+static unsigned int dev_index;
+
static ssize_t device_show(struct device *_d,
struct device_attribute *attr, char *buf)
{
@@ -121,9 +124,9 @@
if (err)
add_status(dev, VIRTIO_CONFIG_S_FAILED);
else {
- add_status(dev, VIRTIO_CONFIG_S_DRIVER_OK);
/* They should never have set feature bits beyond 32 */
dev->config->set_features(dev, dev->features[0]);
+ add_status(dev, VIRTIO_CONFIG_S_DRIVER_OK);
}
return err;
}
@@ -166,7 +169,10 @@
int err;
dev->dev.bus = &virtio_bus;
- sprintf(dev->dev.bus_id, "%u", dev->index);
+
+ /* Assign a unique device index and hence name. */
+ dev->index = dev_index++;
+ sprintf(dev->dev.bus_id, "virtio%u", dev->index);
/* We always start by resetting the device, in case a previous
* driver messed it up. This also tests that code path a little. */
diff --git a/drivers/virtio/virtio_pci.c b/drivers/virtio/virtio_pci.c
index 27e9fc9..eae72363 100644
--- a/drivers/virtio/virtio_pci.c
+++ b/drivers/virtio/virtio_pci.c
@@ -78,9 +78,6 @@
.bus_id = "virtio-pci",
};
-/* Unique numbering for devices under the kvm root */
-static unsigned int dev_index;
-
/* Convert a generic virtio device to our structure */
static struct virtio_pci_device *to_vp_device(struct virtio_device *vdev)
{
@@ -325,10 +322,6 @@
if (vp_dev == NULL)
return -ENOMEM;
- snprintf(vp_dev->vdev.dev.bus_id, BUS_ID_SIZE, "virtio%d", dev_index);
- vp_dev->vdev.index = dev_index;
- dev_index++;
-
vp_dev->vdev.dev.parent = &virtio_pci_root;
vp_dev->vdev.config = &virtio_pci_config_ops;
vp_dev->pci_dev = pci_dev;
diff --git a/drivers/virtio/virtio_ring.c b/drivers/virtio/virtio_ring.c
index 937a49d..72bf8bc 100644
--- a/drivers/virtio/virtio_ring.c
+++ b/drivers/virtio/virtio_ring.c
@@ -227,7 +227,6 @@
struct vring_virtqueue *vq = to_vvq(_vq);
START_USE(vq);
- BUG_ON(!(vq->vring.avail->flags & VRING_AVAIL_F_NO_INTERRUPT));
/* We optimistically turn back on interrupts, then check if there was
* more to do. */
@@ -254,13 +253,6 @@
if (unlikely(vq->broken))
return IRQ_HANDLED;
- /* Other side may have missed us turning off the interrupt,
- * but we should preserve disable semantic for virtio users. */
- if (unlikely(vq->vring.avail->flags & VRING_AVAIL_F_NO_INTERRUPT)) {
- pr_debug("virtqueue interrupt after disable for %p\n", vq);
- return IRQ_HANDLED;
- }
-
pr_debug("virtqueue callback for %p (%p)\n", vq, vq->vq.callback);
if (vq->vq.callback)
vq->vq.callback(&vq->vq);
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 254d115..ccb78f6 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -295,6 +295,19 @@
Most people will say N.
+config GEODE_WDT
+ tristate "AMD Geode CS5535/CS5536 Watchdog"
+ depends on MGEODE_LX
+ help
+ This driver enables a watchdog capability built into the
+ CS5535/CS5536 companion chips for the AMD Geode GX and LX
+ processors. This watchdog watches your kernel to make sure
+ it doesn't freeze, and if it does, it reboots your computer after
+ a certain amount of time.
+
+ You can compile this driver directly into the kernel, or use
+ it as a module. The module will be called geodewdt.
+
config SC520_WDT
tristate "AMD Elan SC520 processor Watchdog"
depends on X86
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index f3fb170..25b352b 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -59,6 +59,7 @@
obj-$(CONFIG_ADVANTECH_WDT) += advantechwdt.o
obj-$(CONFIG_ALIM1535_WDT) += alim1535_wdt.o
obj-$(CONFIG_ALIM7101_WDT) += alim7101_wdt.o
+obj-$(CONFIG_GEODE_WDT) += geodewdt.o
obj-$(CONFIG_SC520_WDT) += sc520_wdt.o
obj-$(CONFIG_EUROTECH_WDT) += eurotechwdt.o
obj-$(CONFIG_IB700_WDT) += ib700wdt.o
diff --git a/drivers/watchdog/bfin_wdt.c b/drivers/watchdog/bfin_wdt.c
index 1237113..03b3e3d 100644
--- a/drivers/watchdog/bfin_wdt.c
+++ b/drivers/watchdog/bfin_wdt.c
@@ -29,7 +29,8 @@
#define stamp(fmt, args...) pr_debug("%s:%i: " fmt "\n", __func__, __LINE__, ## args)
#define stampit() stamp("here i am")
-#define pr_init(fmt, args...) ({ static const __initdata char __fmt[] = fmt; printk(__fmt, ## args); })
+#define pr_devinit(fmt, args...) ({ static const __devinitconst char __fmt[] = fmt; printk(__fmt, ## args); })
+#define pr_init(fmt, args...) ({ static const __initconst char __fmt[] = fmt; printk(__fmt, ## args); })
#define WATCHDOG_NAME "bfin-wdt"
#define PFX WATCHDOG_NAME ": "
@@ -377,20 +378,6 @@
# define bfin_wdt_resume NULL
#endif
-static struct platform_device bfin_wdt_device = {
- .name = WATCHDOG_NAME,
- .id = -1,
-};
-
-static struct platform_driver bfin_wdt_driver = {
- .driver = {
- .name = WATCHDOG_NAME,
- .owner = THIS_MODULE,
- },
- .suspend = bfin_wdt_suspend,
- .resume = bfin_wdt_resume,
-};
-
static const struct file_operations bfin_wdt_fops = {
.owner = THIS_MODULE,
.llseek = no_llseek,
@@ -418,10 +405,66 @@
};
/**
+ * bfin_wdt_probe - Initialize module
+ *
+ * Registers the misc device and notifier handler. Actual device
+ * initialization is handled by bfin_wdt_open().
+ */
+static int __devinit bfin_wdt_probe(struct platform_device *pdev)
+{
+ int ret;
+
+ ret = register_reboot_notifier(&bfin_wdt_notifier);
+ if (ret) {
+ pr_devinit(KERN_ERR PFX "cannot register reboot notifier (err=%d)\n", ret);
+ return ret;
+ }
+
+ ret = misc_register(&bfin_wdt_miscdev);
+ if (ret) {
+ pr_devinit(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
+ WATCHDOG_MINOR, ret);
+ unregister_reboot_notifier(&bfin_wdt_notifier);
+ return ret;
+ }
+
+ pr_devinit(KERN_INFO PFX "initialized: timeout=%d sec (nowayout=%d)\n",
+ timeout, nowayout);
+
+ return 0;
+}
+
+/**
+ * bfin_wdt_remove - Initialize module
+ *
+ * Unregisters the misc device and notifier handler. Actual device
+ * deinitialization is handled by bfin_wdt_close().
+ */
+static int __devexit bfin_wdt_remove(struct platform_device *pdev)
+{
+ misc_deregister(&bfin_wdt_miscdev);
+ unregister_reboot_notifier(&bfin_wdt_notifier);
+ return 0;
+}
+
+static struct platform_device *bfin_wdt_device;
+
+static struct platform_driver bfin_wdt_driver = {
+ .probe = bfin_wdt_probe,
+ .remove = __devexit_p(bfin_wdt_remove),
+ .suspend = bfin_wdt_suspend,
+ .resume = bfin_wdt_resume,
+ .driver = {
+ .name = WATCHDOG_NAME,
+ .owner = THIS_MODULE,
+ },
+};
+
+/**
* bfin_wdt_init - Initialize module
*
- * Registers the device and notifier handler. Actual device
- * initialization is handled by bfin_wdt_open().
+ * Checks the module params and registers the platform device & driver.
+ * Real work is in the platform probe function.
*/
static int __init bfin_wdt_init(void)
{
@@ -436,44 +479,32 @@
/* Since this is an on-chip device and needs no board-specific
* resources, we'll handle all the platform device stuff here.
*/
- ret = platform_device_register(&bfin_wdt_device);
- if (ret)
- return ret;
-
- ret = platform_driver_probe(&bfin_wdt_driver, NULL);
- if (ret)
- return ret;
-
- ret = register_reboot_notifier(&bfin_wdt_notifier);
+ ret = platform_driver_register(&bfin_wdt_driver);
if (ret) {
- pr_init(KERN_ERR PFX "cannot register reboot notifier (err=%d)\n", ret);
+ pr_init(KERN_ERR PFX "unable to register driver\n");
return ret;
}
- ret = misc_register(&bfin_wdt_miscdev);
- if (ret) {
- pr_init(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n",
- WATCHDOG_MINOR, ret);
- unregister_reboot_notifier(&bfin_wdt_notifier);
- return ret;
+ bfin_wdt_device = platform_device_register_simple(WATCHDOG_NAME, -1, NULL, 0);
+ if (IS_ERR(bfin_wdt_device)) {
+ pr_init(KERN_ERR PFX "unable to register device\n");
+ platform_driver_unregister(&bfin_wdt_driver);
+ return PTR_ERR(bfin_wdt_device);
}
- pr_init(KERN_INFO PFX "initialized: timeout=%d sec (nowayout=%d)\n",
- timeout, nowayout);
-
return 0;
}
/**
* bfin_wdt_exit - Deinitialize module
*
- * Unregisters the device and notifier handler. Actual device
- * deinitialization is handled by bfin_wdt_close().
+ * Back out the platform device & driver steps. Real work is in the
+ * platform remove function.
*/
static void __exit bfin_wdt_exit(void)
{
- misc_deregister(&bfin_wdt_miscdev);
- unregister_reboot_notifier(&bfin_wdt_notifier);
+ platform_device_unregister(bfin_wdt_device);
+ platform_driver_unregister(&bfin_wdt_driver);
}
module_init(bfin_wdt_init);
diff --git a/drivers/watchdog/booke_wdt.c b/drivers/watchdog/booke_wdt.c
index d362f5b..c1ba0db 100644
--- a/drivers/watchdog/booke_wdt.c
+++ b/drivers/watchdog/booke_wdt.c
@@ -1,12 +1,10 @@
/*
- * drivers/char/watchdog/booke_wdt.c
- *
* Watchdog timer for PowerPC Book-E systems
*
* Author: Matthew McClintock
* Maintainer: Kumar Gala <galak@kernel.crashing.org>
*
- * Copyright 2005 Freescale Semiconductor Inc.
+ * Copyright 2005, 2008 Freescale Semiconductor Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -16,6 +14,7 @@
#include <linux/module.h>
#include <linux/fs.h>
+#include <linux/smp.h>
#include <linux/miscdevice.h>
#include <linux/notifier.h>
#include <linux/watchdog.h>
@@ -38,7 +37,7 @@
#define WDT_PERIOD_DEFAULT 3 /* Refer to the PPC40x and PPC4xx manuals */
#endif /* for timing information */
-u32 booke_wdt_enabled = 0;
+u32 booke_wdt_enabled;
u32 booke_wdt_period = WDT_PERIOD_DEFAULT;
#ifdef CONFIG_FSL_BOOKE
@@ -47,33 +46,31 @@
#define WDTP(x) (TCR_WP(x))
#endif
-/*
- * booke_wdt_ping:
- */
-static __inline__ void booke_wdt_ping(void)
+static DEFINE_SPINLOCK(booke_wdt_lock);
+
+static void __booke_wdt_ping(void *data)
{
mtspr(SPRN_TSR, TSR_ENW|TSR_WIS);
}
-/*
- * booke_wdt_enable:
- */
-static __inline__ void booke_wdt_enable(void)
+static void booke_wdt_ping(void)
+{
+ on_each_cpu(__booke_wdt_ping, NULL, 0, 0);
+}
+
+static void __booke_wdt_enable(void *data)
{
u32 val;
/* clear status before enabling watchdog */
- booke_wdt_ping();
+ __booke_wdt_ping(NULL);
val = mfspr(SPRN_TCR);
val |= (TCR_WIE|TCR_WRC(WRC_CHIP)|WDTP(booke_wdt_period));
mtspr(SPRN_TCR, val);
}
-/*
- * booke_wdt_write:
- */
-static ssize_t booke_wdt_write (struct file *file, const char __user *buf,
+static ssize_t booke_wdt_write(struct file *file, const char __user *buf,
size_t count, loff_t *ppos)
{
booke_wdt_ping();
@@ -81,15 +78,11 @@
}
static struct watchdog_info ident = {
- .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
- .firmware_version = 0,
- .identity = "PowerPC Book-E Watchdog",
+ .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
+ .identity = "PowerPC Book-E Watchdog",
};
-/*
- * booke_wdt_ioctl:
- */
-static int booke_wdt_ioctl (struct inode *inode, struct file *file,
+static int booke_wdt_ioctl(struct inode *inode, struct file *file,
unsigned int cmd, unsigned long arg)
{
u32 tmp = 0;
@@ -97,7 +90,7 @@
switch (cmd) {
case WDIOC_GETSUPPORT:
- if (copy_to_user ((struct watchdog_info __user *) arg, &ident,
+ if (copy_to_user((struct watchdog_info __user *)arg, &ident,
sizeof(struct watchdog_info)))
return -EFAULT;
case WDIOC_GETSTATUS:
@@ -132,33 +125,33 @@
return 0;
}
-/*
- * booke_wdt_open:
- */
-static int booke_wdt_open (struct inode *inode, struct file *file)
+
+static int booke_wdt_open(struct inode *inode, struct file *file)
{
+ spin_lock(&booke_wdt_lock);
if (booke_wdt_enabled == 0) {
booke_wdt_enabled = 1;
- booke_wdt_enable();
- printk (KERN_INFO "PowerPC Book-E Watchdog Timer Enabled (wdt_period=%d)\n",
- booke_wdt_period);
+ on_each_cpu(__booke_wdt_enable, NULL, 0, 0);
+ printk(KERN_INFO "PowerPC Book-E Watchdog Timer Enabled "
+ "(wdt_period=%d)\n", booke_wdt_period);
}
+ spin_unlock(&booke_wdt_lock);
return nonseekable_open(inode, file);
}
static const struct file_operations booke_wdt_fops = {
- .owner = THIS_MODULE,
- .llseek = no_llseek,
- .write = booke_wdt_write,
- .ioctl = booke_wdt_ioctl,
- .open = booke_wdt_open,
+ .owner = THIS_MODULE,
+ .llseek = no_llseek,
+ .write = booke_wdt_write,
+ .ioctl = booke_wdt_ioctl,
+ .open = booke_wdt_open,
};
static struct miscdevice booke_wdt_miscdev = {
- .minor = WATCHDOG_MINOR,
- .name = "watchdog",
- .fops = &booke_wdt_fops,
+ .minor = WATCHDOG_MINOR,
+ .name = "watchdog",
+ .fops = &booke_wdt_fops,
};
static void __exit booke_wdt_exit(void)
@@ -166,28 +159,27 @@
misc_deregister(&booke_wdt_miscdev);
}
-/*
- * booke_wdt_init:
- */
static int __init booke_wdt_init(void)
{
int ret = 0;
- printk (KERN_INFO "PowerPC Book-E Watchdog Timer Loaded\n");
+ printk(KERN_INFO "PowerPC Book-E Watchdog Timer Loaded\n");
ident.firmware_version = cur_cpu_spec->pvr_value;
ret = misc_register(&booke_wdt_miscdev);
if (ret) {
- printk (KERN_CRIT "Cannot register miscdev on minor=%d (err=%d)\n",
+ printk(KERN_CRIT "Cannot register miscdev on minor=%d: %d\n",
WATCHDOG_MINOR, ret);
return ret;
}
+ spin_lock(&booke_wdt_lock);
if (booke_wdt_enabled == 1) {
- printk (KERN_INFO "PowerPC Book-E Watchdog Timer Enabled (wdt_period=%d)\n",
- booke_wdt_period);
- booke_wdt_enable();
+ printk(KERN_INFO "PowerPC Book-E Watchdog Timer Enabled "
+ "(wdt_period=%d)\n", booke_wdt_period);
+ on_each_cpu(__booke_wdt_enable, NULL, 0, 0);
}
+ spin_unlock(&booke_wdt_lock);
return ret;
}
diff --git a/drivers/watchdog/geodewdt.c b/drivers/watchdog/geodewdt.c
new file mode 100644
index 0000000..30d09cb
--- /dev/null
+++ b/drivers/watchdog/geodewdt.c
@@ -0,0 +1,308 @@
+/* Watchdog timer for the Geode GX/LX with the CS5535/CS5536 companion chip
+ *
+ * Copyright (C) 2006-2007, Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/types.h>
+#include <linux/miscdevice.h>
+#include <linux/watchdog.h>
+#include <linux/fs.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+
+#include <asm/uaccess.h>
+#include <asm/geode.h>
+
+#define GEODEWDT_HZ 500
+#define GEODEWDT_SCALE 6
+#define GEODEWDT_MAX_SECONDS 131
+
+#define WDT_FLAGS_OPEN 1
+#define WDT_FLAGS_ORPHAN 2
+
+#define DRV_NAME "geodewdt"
+#define WATCHDOG_NAME "Geode GX/LX WDT"
+#define WATCHDOG_TIMEOUT 60
+
+static int timeout = WATCHDOG_TIMEOUT;
+module_param(timeout, int, 0);
+MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. 1<= timeout <=131, default=" __MODULE_STRING(WATCHDOG_TIMEOUT) ".");
+
+static int nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, int, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+static struct platform_device *geodewdt_platform_device;
+static unsigned long wdt_flags;
+static int wdt_timer;
+static int safe_close;
+
+static void geodewdt_ping(void)
+{
+ /* Stop the counter */
+ geode_mfgpt_write(wdt_timer, MFGPT_REG_SETUP, 0);
+
+ /* Reset the counter */
+ geode_mfgpt_write(wdt_timer, MFGPT_REG_COUNTER, 0);
+
+ /* Enable the counter */
+ geode_mfgpt_write(wdt_timer, MFGPT_REG_SETUP, MFGPT_SETUP_CNTEN);
+}
+
+static void geodewdt_disable(void)
+{
+ geode_mfgpt_write(wdt_timer, MFGPT_REG_SETUP, 0);
+ geode_mfgpt_write(wdt_timer, MFGPT_REG_COUNTER, 0);
+}
+
+static int geodewdt_set_heartbeat(int val)
+{
+ if (val < 1 || val > GEODEWDT_MAX_SECONDS)
+ return -EINVAL;
+
+ geode_mfgpt_write(wdt_timer, MFGPT_REG_SETUP, 0);
+ geode_mfgpt_write(wdt_timer, MFGPT_REG_CMP2, val * GEODEWDT_HZ);
+ geode_mfgpt_write(wdt_timer, MFGPT_REG_COUNTER, 0);
+ geode_mfgpt_write(wdt_timer, MFGPT_REG_SETUP, MFGPT_SETUP_CNTEN);
+
+ timeout = val;
+ return 0;
+}
+
+static int
+geodewdt_open(struct inode *inode, struct file *file)
+{
+ if (test_and_set_bit(WDT_FLAGS_OPEN, &wdt_flags))
+ return -EBUSY;
+
+ if (!test_and_clear_bit(WDT_FLAGS_ORPHAN, &wdt_flags))
+ __module_get(THIS_MODULE);
+
+ geodewdt_ping();
+ return nonseekable_open(inode, file);
+}
+
+static int
+geodewdt_release(struct inode *inode, struct file *file)
+{
+ if (safe_close) {
+ geodewdt_disable();
+ module_put(THIS_MODULE);
+ }
+ else {
+ printk(KERN_CRIT "Unexpected close - watchdog is not stopping.\n");
+ geodewdt_ping();
+
+ set_bit(WDT_FLAGS_ORPHAN, &wdt_flags);
+ }
+
+ clear_bit(WDT_FLAGS_OPEN, &wdt_flags);
+ safe_close = 0;
+ return 0;
+}
+
+static ssize_t
+geodewdt_write(struct file *file, const char __user *data, size_t len,
+ loff_t *ppos)
+{
+ if(len) {
+ if (!nowayout) {
+ size_t i;
+ safe_close = 0;
+
+ for (i = 0; i != len; i++) {
+ char c;
+
+ if (get_user(c, data + i))
+ return -EFAULT;
+
+ if (c == 'V')
+ safe_close = 1;
+ }
+ }
+
+ geodewdt_ping();
+ }
+ return len;
+}
+
+static int
+geodewdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
+ unsigned long arg)
+{
+ void __user *argp = (void __user *)arg;
+ int __user *p = argp;
+ int interval;
+
+ static struct watchdog_info ident = {
+ .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING
+ | WDIOF_MAGICCLOSE,
+ .firmware_version = 1,
+ .identity = WATCHDOG_NAME,
+ };
+
+ switch(cmd) {
+ case WDIOC_GETSUPPORT:
+ return copy_to_user(argp, &ident,
+ sizeof(ident)) ? -EFAULT : 0;
+ break;
+
+ case WDIOC_GETSTATUS:
+ case WDIOC_GETBOOTSTATUS:
+ return put_user(0, p);
+
+ case WDIOC_KEEPALIVE:
+ geodewdt_ping();
+ return 0;
+
+ case WDIOC_SETTIMEOUT:
+ if (get_user(interval, p))
+ return -EFAULT;
+
+ if (geodewdt_set_heartbeat(interval))
+ return -EINVAL;
+
+/* Fall through */
+
+ case WDIOC_GETTIMEOUT:
+ return put_user(timeout, p);
+
+ case WDIOC_SETOPTIONS:
+ {
+ int options, ret = -EINVAL;
+
+ if (get_user(options, p))
+ return -EFAULT;
+
+ if (options & WDIOS_DISABLECARD) {
+ geodewdt_disable();
+ ret = 0;
+ }
+
+ if (options & WDIOS_ENABLECARD) {
+ geodewdt_ping();
+ ret = 0;
+ }
+
+ return ret;
+ }
+ default:
+ return -ENOTTY;
+ }
+
+ return 0;
+}
+
+static const struct file_operations geodewdt_fops = {
+ .owner = THIS_MODULE,
+ .llseek = no_llseek,
+ .write = geodewdt_write,
+ .ioctl = geodewdt_ioctl,
+ .open = geodewdt_open,
+ .release = geodewdt_release,
+};
+
+static struct miscdevice geodewdt_miscdev = {
+ .minor = WATCHDOG_MINOR,
+ .name = "watchdog",
+ .fops = &geodewdt_fops
+};
+
+static int __devinit
+geodewdt_probe(struct platform_device *dev)
+{
+ int ret, timer;
+
+ timer = geode_mfgpt_alloc_timer(MFGPT_TIMER_ANY, MFGPT_DOMAIN_WORKING);
+
+ if (timer == -1) {
+ printk(KERN_ERR "geodewdt: No timers were available\n");
+ return -ENODEV;
+ }
+
+ wdt_timer = timer;
+
+ /* Set up the timer */
+
+ geode_mfgpt_write(wdt_timer, MFGPT_REG_SETUP,
+ GEODEWDT_SCALE | (3 << 8));
+
+ /* Set up comparator 2 to reset when the event fires */
+ geode_mfgpt_toggle_event(wdt_timer, MFGPT_CMP2, MFGPT_EVENT_RESET, 1);
+
+ /* Set up the initial timeout */
+
+ geode_mfgpt_write(wdt_timer, MFGPT_REG_CMP2,
+ timeout * GEODEWDT_HZ);
+
+ ret = misc_register(&geodewdt_miscdev);
+
+ return ret;
+}
+
+static int __devexit
+geodewdt_remove(struct platform_device *dev)
+{
+ misc_deregister(&geodewdt_miscdev);
+ return 0;
+}
+
+static void
+geodewdt_shutdown(struct platform_device *dev)
+{
+ geodewdt_disable();
+}
+
+static struct platform_driver geodewdt_driver = {
+ .probe = geodewdt_probe,
+ .remove = __devexit_p(geodewdt_remove),
+ .shutdown = geodewdt_shutdown,
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = DRV_NAME,
+ },
+};
+
+static int __init
+geodewdt_init(void)
+{
+ int ret;
+
+ ret = platform_driver_register(&geodewdt_driver);
+ if (ret)
+ return ret;
+
+ geodewdt_platform_device = platform_device_register_simple(DRV_NAME, -1, NULL, 0);
+ if (IS_ERR(geodewdt_platform_device)) {
+ ret = PTR_ERR(geodewdt_platform_device);
+ goto err;
+ }
+
+ return 0;
+err:
+ platform_driver_unregister(&geodewdt_driver);
+ return ret;
+}
+
+static void __exit
+geodewdt_exit(void)
+{
+ platform_device_unregister(geodewdt_platform_device);
+ platform_driver_unregister(&geodewdt_driver);
+}
+
+module_init(geodewdt_init);
+module_exit(geodewdt_exit);
+
+MODULE_AUTHOR("Advanced Micro Devices, Inc");
+MODULE_DESCRIPTION("Geode GX/LX Watchdog Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
diff --git a/drivers/watchdog/hpwdt.c b/drivers/watchdog/hpwdt.c
index 6483d10..6a63535 100644
--- a/drivers/watchdog/hpwdt.c
+++ b/drivers/watchdog/hpwdt.c
@@ -418,23 +418,20 @@
static unsigned long rom_pl;
static int die_nmi_called;
- if (ulReason != DIE_NMI && ulReason != DIE_NMI_IPI)
- return NOTIFY_OK;
-
- spin_lock_irqsave(&rom_lock, rom_pl);
- if (!die_nmi_called)
- asminline_call(&cmn_regs, cru_rom_addr);
- die_nmi_called = 1;
- spin_unlock_irqrestore(&rom_lock, rom_pl);
- if (cmn_regs.u1.ral == 0) {
- printk(KERN_WARNING "hpwdt: An NMI occurred, "
- "but unable to determine source.\n");
- } else {
- panic("An NMI occurred, please see the Integrated "
- "Management Log for details.\n");
+ if (ulReason == DIE_NMI || ulReason == DIE_NMI_IPI) {
+ spin_lock_irqsave(&rom_lock, rom_pl);
+ if (!die_nmi_called)
+ asminline_call(&cmn_regs, cru_rom_addr);
+ die_nmi_called = 1;
+ spin_unlock_irqrestore(&rom_lock, rom_pl);
+ if (cmn_regs.u1.ral != 0) {
+ panic("An NMI occurred, please see the Integrated "
+ "Management Log for details.\n");
+ }
}
- return NOTIFY_STOP;
+ die_nmi_called = 0;
+ return NOTIFY_DONE;
}
/*
diff --git a/drivers/watchdog/iTCO_wdt.c b/drivers/watchdog/iTCO_wdt.c
index a0e6809..95ba985 100644
--- a/drivers/watchdog/iTCO_wdt.c
+++ b/drivers/watchdog/iTCO_wdt.c
@@ -41,9 +41,10 @@
* 82801HH (ICH8DH) : document number 313056-003, 313057-009,
* 82801HO (ICH8DO) : document number 313056-003, 313057-009,
* 82801HEM (ICH8M-E) : document number 313056-003, 313057-009,
- * 82801IB (ICH9) : document number 316972-001, 316973-001,
- * 82801IR (ICH9R) : document number 316972-001, 316973-001,
- * 82801IH (ICH9DH) : document number 316972-001, 316973-001,
+ * 82801IB (ICH9) : document number 316972-001, 316973-006,
+ * 82801IR (ICH9R) : document number 316972-001, 316973-006,
+ * 82801IH (ICH9DH) : document number 316972-001, 316973-006,
+ * 82801IO (ICH9DO) : document number 316972-001, 316973-006,
* 6300ESB (6300ESB) : document number 300641-003, 300884-010,
* 631xESB (631xESB) : document number 313082-001, 313075-005,
* 632xESB (632xESB) : document number 313082-001, 313075-005
@@ -55,8 +56,8 @@
/* Module and version information */
#define DRV_NAME "iTCO_wdt"
-#define DRV_VERSION "1.02"
-#define DRV_RELDATE "26-Jul-2007"
+#define DRV_VERSION "1.03"
+#define DRV_RELDATE "30-Apr-2008"
#define PFX DRV_NAME ": "
/* Includes */
@@ -104,6 +105,7 @@
TCO_ICH9, /* ICH9 */
TCO_ICH9R, /* ICH9R */
TCO_ICH9DH, /* ICH9DH */
+ TCO_ICH9DO, /* ICH9DO */
TCO_631XESB, /* 631xESB/632xESB */
};
@@ -136,6 +138,7 @@
{"ICH9", 2},
{"ICH9R", 2},
{"ICH9DH", 2},
+ {"ICH9DO", 2},
{"631xESB/632xESB", 2},
{NULL,0}
};
@@ -181,6 +184,7 @@
{ ITCO_PCI_DEVICE(0x2918, TCO_ICH9 )},
{ ITCO_PCI_DEVICE(0x2916, TCO_ICH9R )},
{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH9_2, TCO_ICH9DH )},
+ { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH9_4, TCO_ICH9DO )},
{ ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ESB2_0, TCO_631XESB)},
{ ITCO_PCI_DEVICE(0x2671, TCO_631XESB)},
{ ITCO_PCI_DEVICE(0x2672, TCO_631XESB)},
diff --git a/drivers/watchdog/w83697hf_wdt.c b/drivers/watchdog/w83697hf_wdt.c
index c622a0e..528b882 100644
--- a/drivers/watchdog/w83697hf_wdt.c
+++ b/drivers/watchdog/w83697hf_wdt.c
@@ -44,6 +44,7 @@
#define WATCHDOG_NAME "w83697hf/hg WDT"
#define PFX WATCHDOG_NAME ": "
#define WATCHDOG_TIMEOUT 60 /* 60 sec default timeout */
+#define WATCHDOG_EARLY_DISABLE 1 /* Disable until userland kicks in */
static unsigned long wdt_is_open;
static char expect_close;
@@ -56,12 +57,16 @@
static int timeout = WATCHDOG_TIMEOUT; /* in seconds */
module_param(timeout, int, 0);
-MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. 1<= timeout <=255, default=" __MODULE_STRING(WATCHDOG_TIMEOUT) ".");
+MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. 1<= timeout <=255 (default=" __MODULE_STRING(WATCHDOG_TIMEOUT) ")");
static int nowayout = WATCHDOG_NOWAYOUT;
module_param(nowayout, int, 0);
MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+static int early_disable = WATCHDOG_EARLY_DISABLE;
+module_param(early_disable, int, 0);
+MODULE_PARM_DESC(early_disable, "Watchdog gets disabled at boot time (default=" __MODULE_STRING(WATCHDOG_EARLY_DISABLE) ")");
+
/*
* Kernel methods.
*/
@@ -140,7 +145,7 @@
w83697hf_deselect_wdt();
}
-static int
+static void
wdt_ping(void)
{
spin_lock(&io_lock);
@@ -150,10 +155,9 @@
w83697hf_deselect_wdt();
spin_unlock(&io_lock);
- return 0;
}
-static int
+static void
wdt_enable(void)
{
spin_lock(&io_lock);
@@ -164,10 +168,9 @@
w83697hf_deselect_wdt();
spin_unlock(&io_lock);
- return 0;
}
-static int
+static void
wdt_disable(void)
{
spin_lock(&io_lock);
@@ -178,7 +181,22 @@
w83697hf_deselect_wdt();
spin_unlock(&io_lock);
- return 0;
+}
+
+static unsigned char
+wdt_running(void)
+{
+ unsigned char t;
+
+ spin_lock(&io_lock);
+ w83697hf_select_wdt();
+
+ t = w83697hf_get_reg(0xF4); /* Read timer */
+
+ w83697hf_deselect_wdt();
+ spin_unlock(&io_lock);
+
+ return t;
}
static int
@@ -397,7 +415,11 @@
}
w83697hf_init();
- wdt_disable(); /* Disable watchdog until first use */
+ if (early_disable) {
+ if (wdt_running())
+ printk (KERN_WARNING PFX "Stopping previously enabled watchdog until userland kicks in\n");
+ wdt_disable();
+ }
if (wdt_set_heartbeat(timeout)) {
wdt_set_heartbeat(WATCHDOG_TIMEOUT);
diff --git a/fs/9p/fid.h b/fs/9p/fid.h
index 26e07df..c3bbd6a 100644
--- a/fs/9p/fid.h
+++ b/fs/9p/fid.h
@@ -22,6 +22,21 @@
#include <linux/list.h>
+/**
+ * struct v9fs_dentry - 9p private data stored in dentry d_fsdata
+ * @lock: protects the fidlist
+ * @fidlist: list of FIDs currently associated with this dentry
+ *
+ * This structure defines the 9p private data associated with
+ * a particular dentry. In particular, this private data is used
+ * to lookup which 9P FID handle should be used for a particular VFS
+ * operation. FID handles are associated with dentries instead of
+ * inodes in order to more closely map functionality to the Plan 9
+ * expected behavior for FID reclaimation and tracking.
+ *
+ * See Also: Mapping FIDs to Linux VFS model in
+ * Design and Implementation of the Linux 9P File System documentation
+ */
struct v9fs_dentry {
spinlock_t lock; /* protect fidlist */
struct list_head fidlist;
diff --git a/fs/9p/v9fs.c b/fs/9p/v9fs.c
index 9b0f022..047c791 100644
--- a/fs/9p/v9fs.c
+++ b/fs/9p/v9fs.c
@@ -71,19 +71,19 @@
/**
* v9fs_parse_options - parse mount options into session structure
- * @options: options string passed from mount
* @v9ses: existing v9fs session information
*
+ * Return 0 upon success, -ERRNO upon failure.
*/
-static void v9fs_parse_options(struct v9fs_session_info *v9ses)
+static int v9fs_parse_options(struct v9fs_session_info *v9ses)
{
char *options;
substring_t args[MAX_OPT_ARGS];
char *p;
int option = 0;
char *s, *e;
- int ret;
+ int ret = 0;
/* setup defaults */
v9ses->afid = ~0;
@@ -91,19 +91,26 @@
v9ses->cache = 0;
if (!v9ses->options)
- return;
+ return 0;
options = kstrdup(v9ses->options, GFP_KERNEL);
+ if (!options) {
+ P9_DPRINTK(P9_DEBUG_ERROR,
+ "failed to allocate copy of option string\n");
+ return -ENOMEM;
+ }
+
while ((p = strsep(&options, ",")) != NULL) {
int token;
if (!*p)
continue;
token = match_token(p, tokens, args);
if (token < Opt_uname) {
- ret = match_int(&args[0], &option);
- if (ret < 0) {
+ int r = match_int(&args[0], &option);
+ if (r < 0) {
P9_DPRINTK(P9_DEBUG_ERROR,
"integer field, but no integer?\n");
+ ret = r;
continue;
}
}
@@ -125,10 +132,10 @@
v9ses->afid = option;
break;
case Opt_uname:
- match_strcpy(v9ses->uname, &args[0]);
+ match_strlcpy(v9ses->uname, &args[0], PATH_MAX);
break;
case Opt_remotename:
- match_strcpy(v9ses->aname, &args[0]);
+ match_strlcpy(v9ses->aname, &args[0], PATH_MAX);
break;
case Opt_nodevmap:
v9ses->nodev = 1;
@@ -139,6 +146,13 @@
case Opt_access:
s = match_strdup(&args[0]);
+ if (!s) {
+ P9_DPRINTK(P9_DEBUG_ERROR,
+ "failed to allocate copy"
+ " of option argument\n");
+ ret = -ENOMEM;
+ break;
+ }
v9ses->flags &= ~V9FS_ACCESS_MASK;
if (strcmp(s, "user") == 0)
v9ses->flags |= V9FS_ACCESS_USER;
@@ -158,6 +172,7 @@
}
}
kfree(options);
+ return ret;
}
/**
@@ -173,6 +188,7 @@
{
int retval = -EINVAL;
struct p9_fid *fid;
+ int rc;
v9ses->uname = __getname();
if (!v9ses->uname)
@@ -190,8 +206,21 @@
v9ses->uid = ~0;
v9ses->dfltuid = V9FS_DEFUID;
v9ses->dfltgid = V9FS_DEFGID;
- v9ses->options = kstrdup(data, GFP_KERNEL);
- v9fs_parse_options(v9ses);
+ if (data) {
+ v9ses->options = kstrdup(data, GFP_KERNEL);
+ if (!v9ses->options) {
+ P9_DPRINTK(P9_DEBUG_ERROR,
+ "failed to allocate copy of option string\n");
+ retval = -ENOMEM;
+ goto error;
+ }
+ }
+
+ rc = v9fs_parse_options(v9ses);
+ if (rc < 0) {
+ retval = rc;
+ goto error;
+ }
v9ses->clnt = p9_client_create(dev_name, v9ses->options);
@@ -233,7 +262,6 @@
return fid;
error:
- v9fs_session_close(v9ses);
return ERR_PTR(retval);
}
@@ -256,9 +284,12 @@
}
/**
- * v9fs_session_cancel - mark transport as disconnected
- * and cancel all pending requests.
+ * v9fs_session_cancel - terminate a session
+ * @v9ses: session to terminate
+ *
+ * mark transport as disconnected and cancel all pending requests.
*/
+
void v9fs_session_cancel(struct v9fs_session_info *v9ses) {
P9_DPRINTK(P9_DEBUG_ERROR, "cancel session %p\n", v9ses);
p9_client_disconnect(v9ses->clnt);
diff --git a/fs/9p/v9fs.h b/fs/9p/v9fs.h
index 7d3a101..a7d5671 100644
--- a/fs/9p/v9fs.h
+++ b/fs/9p/v9fs.h
@@ -21,18 +21,69 @@
*
*/
-/*
- * Session structure provides information for an opened session
- *
- */
+/**
+ * enum p9_session_flags - option flags for each 9P session
+ * @V9FS_EXTENDED: whether or not to use 9P2000.u extensions
+ * @V9FS_ACCESS_SINGLE: only the mounting user can access the hierarchy
+ * @V9FS_ACCESS_USER: a new attach will be issued for every user (default)
+ * @V9FS_ACCESS_ANY: use a single attach for all users
+ * @V9FS_ACCESS_MASK: bit mask of different ACCESS options
+ *
+ * Session flags reflect options selected by users at mount time
+ */
+enum p9_session_flags {
+ V9FS_EXTENDED = 0x01,
+ V9FS_ACCESS_SINGLE = 0x02,
+ V9FS_ACCESS_USER = 0x04,
+ V9FS_ACCESS_ANY = 0x06,
+ V9FS_ACCESS_MASK = 0x06,
+};
+
+/* possible values of ->cache */
+/**
+ * enum p9_cache_modes - user specified cache preferences
+ * @CACHE_NONE: do not cache data, dentries, or directory contents (default)
+ * @CACHE_LOOSE: cache data, dentries, and directory contents w/no consistency
+ *
+ * eventually support loose, tight, time, session, default always none
+ */
+
+enum p9_cache_modes {
+ CACHE_NONE,
+ CACHE_LOOSE,
+};
+
+/**
+ * struct v9fs_session_info - per-instance session information
+ * @flags: session options of type &p9_session_flags
+ * @nodev: set to 1 to disable device mapping
+ * @debug: debug level
+ * @afid: authentication handle
+ * @cache: cache mode of type &p9_cache_modes
+ * @options: copy of options string given by user
+ * @uname: string user name to mount hierarchy as
+ * @aname: mount specifier for remote hierarchy
+ * @maxdata: maximum data to be sent/recvd per protocol message
+ * @dfltuid: default numeric userid to mount hierarchy as
+ * @dfltgid: default numeric groupid to mount hierarchy as
+ * @uid: if %V9FS_ACCESS_SINGLE, the numeric uid which mounted the hierarchy
+ * @clnt: reference to 9P network client instantiated for this session
+ * @debugfs_dir: reference to debugfs_dir which can be used for add'l debug
+ *
+ * This structure holds state for each session instance established during
+ * a sys_mount() .
+ *
+ * Bugs: there seems to be a lot of state which could be condensed and/or
+ * removed.
+ */
struct v9fs_session_info {
/* options */
- unsigned char flags; /* session flags */
- unsigned char nodev; /* set to 1 if no disable device mapping */
- unsigned short debug; /* debug level */
- unsigned int afid; /* authentication fid */
- unsigned int cache; /* cache mode */
+ unsigned char flags;
+ unsigned char nodev;
+ unsigned short debug;
+ unsigned int afid;
+ unsigned int cache;
char *options; /* copy of mount options */
char *uname; /* user name to mount as */
@@ -45,22 +96,6 @@
struct dentry *debugfs_dir;
};
-/* session flags */
-enum {
- V9FS_EXTENDED = 0x01, /* 9P2000.u */
- V9FS_ACCESS_MASK = 0x06, /* access mask */
- V9FS_ACCESS_SINGLE = 0x02, /* only one user can access the files */
- V9FS_ACCESS_USER = 0x04, /* attache per user */
- V9FS_ACCESS_ANY = 0x06, /* use the same attach for all users */
-};
-
-/* possible values of ->cache */
-/* eventually support loose, tight, time, session, default always none */
-enum {
- CACHE_NONE, /* default */
- CACHE_LOOSE, /* no consistency */
-};
-
extern struct dentry *v9fs_debugfs_root;
struct p9_fid *v9fs_session_init(struct v9fs_session_info *, const char *,
diff --git a/fs/9p/vfs_addr.c b/fs/9p/vfs_addr.c
index 6248f0e..97d3aed 100644
--- a/fs/9p/vfs_addr.c
+++ b/fs/9p/vfs_addr.c
@@ -43,7 +43,7 @@
/**
* v9fs_vfs_readpage - read an entire page in from 9P
*
- * @file: file being read
+ * @filp: file being read
* @page: structure to page
*
*/
diff --git a/fs/9p/vfs_dir.c b/fs/9p/vfs_dir.c
index 0924d44..88e3787 100644
--- a/fs/9p/vfs_dir.c
+++ b/fs/9p/vfs_dir.c
@@ -60,7 +60,7 @@
/**
* v9fs_dir_readdir - read a directory
- * @filep: opened file structure
+ * @filp: opened file structure
* @dirent: directory structure ???
* @filldir: function to populate directory structure ???
*
diff --git a/fs/9p/vfs_file.c b/fs/9p/vfs_file.c
index a616fff..0d55aff 100644
--- a/fs/9p/vfs_file.c
+++ b/fs/9p/vfs_file.c
@@ -90,10 +90,11 @@
/**
* v9fs_file_lock - lock a file (or directory)
- * @inode: inode to be opened
- * @file: file being opened
+ * @filp: file to be locked
+ * @cmd: lock command
+ * @fl: file lock structure
*
- * XXX - this looks like a local only lock, we should extend into 9P
+ * Bugs: this looks like a local only lock, we should extend into 9P
* by using open exclusive
*/
@@ -118,7 +119,7 @@
/**
* v9fs_file_read - read from a file
- * @filep: file pointer to read
+ * @filp: file pointer to read
* @data: data buffer to read data into
* @count: size of buffer
* @offset: offset at which to read data
@@ -142,7 +143,7 @@
/**
* v9fs_file_write - write to a file
- * @filep: file pointer to write
+ * @filp: file pointer to write
* @data: data buffer to write data from
* @count: size of buffer
* @offset: offset at which to write data
diff --git a/fs/9p/vfs_inode.c b/fs/9p/vfs_inode.c
index 6a28842..40fa807 100644
--- a/fs/9p/vfs_inode.c
+++ b/fs/9p/vfs_inode.c
@@ -129,6 +129,12 @@
return res;
}
+/**
+ * v9fs_uflags2omode- convert posix open flags to plan 9 mode bits
+ * @uflags: flags to convert
+ *
+ */
+
int v9fs_uflags2omode(int uflags)
{
int ret;
@@ -312,6 +318,14 @@
}
*/
+/**
+ * v9fs_inode_from_fid - populate an inode by issuing a attribute request
+ * @v9ses: session information
+ * @fid: fid to issue attribute request for
+ * @sb: superblock on which to create inode
+ *
+ */
+
static struct inode *
v9fs_inode_from_fid(struct v9fs_session_info *v9ses, struct p9_fid *fid,
struct super_block *sb)
@@ -384,9 +398,12 @@
/**
* v9fs_create - Create a file
+ * @v9ses: session information
+ * @dir: directory that dentry is being created in
* @dentry: dentry that is being created
* @perm: create permissions
* @mode: open mode
+ * @extension: 9p2000.u extension string to support devices, etc.
*
*/
static struct p9_fid *
@@ -461,7 +478,7 @@
/**
* v9fs_vfs_create - VFS hook to create files
- * @inode: directory inode that is being created
+ * @dir: directory inode that is being created
* @dentry: dentry that is being deleted
* @mode: create permissions
* @nd: path information
@@ -519,7 +536,7 @@
/**
* v9fs_vfs_mkdir - VFS mkdir hook to create a directory
- * @inode: inode that is being unlinked
+ * @dir: inode that is being unlinked
* @dentry: dentry that is being unlinked
* @mode: mode for new directory
*
@@ -703,9 +720,9 @@
/**
* v9fs_vfs_getattr - retrieve file metadata
- * @mnt - mount information
- * @dentry - file to get attributes on
- * @stat - metadata structure to populate
+ * @mnt: mount information
+ * @dentry: file to get attributes on
+ * @stat: metadata structure to populate
*
*/
@@ -928,7 +945,7 @@
/**
* v9fs_vfs_readlink - read a symlink's location
* @dentry: dentry for symlink
- * @buf: buffer to load symlink location into
+ * @buffer: buffer to load symlink location into
* @buflen: length of buffer
*
*/
@@ -996,10 +1013,12 @@
* v9fs_vfs_put_link - release a symlink path
* @dentry: dentry for symlink
* @nd: nameidata
+ * @p: unused
*
*/
-static void v9fs_vfs_put_link(struct dentry *dentry, struct nameidata *nd, void *p)
+static void
+v9fs_vfs_put_link(struct dentry *dentry, struct nameidata *nd, void *p)
{
char *s = nd_get_link(nd);
@@ -1008,6 +1027,15 @@
__putname(s);
}
+/**
+ * v9fs_vfs_mkspecial - create a special file
+ * @dir: inode to create special file in
+ * @dentry: dentry to create
+ * @mode: mode to create special file
+ * @extension: 9p2000.u format extension string representing special file
+ *
+ */
+
static int v9fs_vfs_mkspecial(struct inode *dir, struct dentry *dentry,
int mode, const char *extension)
{
@@ -1037,7 +1065,7 @@
* @dentry: dentry for symlink
* @symname: symlink data
*
- * See 9P2000.u RFC for more information
+ * See Also: 9P2000.u RFC for more information
*
*/
@@ -1058,10 +1086,6 @@
*
*/
-/* XXX - lots of code dup'd from symlink and creates,
- * figure out a better reuse strategy
- */
-
static int
v9fs_vfs_link(struct dentry *old_dentry, struct inode *dir,
struct dentry *dentry)
@@ -1098,7 +1122,7 @@
* @dir: inode destination for new link
* @dentry: dentry for file
* @mode: mode for creation
- * @dev_t: device associated with special file
+ * @rdev: device associated with special file
*
*/
diff --git a/fs/9p/vfs_super.c b/fs/9p/vfs_super.c
index a452ac6..bf59c39 100644
--- a/fs/9p/vfs_super.c
+++ b/fs/9p/vfs_super.c
@@ -75,6 +75,7 @@
* v9fs_fill_super - populate superblock with info
* @sb: superblock
* @v9ses: session information
+ * @flags: flags propagated from v9fs_get_sb()
*
*/
@@ -127,29 +128,26 @@
fid = v9fs_session_init(v9ses, dev_name, data);
if (IS_ERR(fid)) {
retval = PTR_ERR(fid);
- fid = NULL;
- kfree(v9ses);
- v9ses = NULL;
- goto error;
+ goto close_session;
}
st = p9_client_stat(fid);
if (IS_ERR(st)) {
retval = PTR_ERR(st);
- goto error;
+ goto clunk_fid;
}
sb = sget(fs_type, NULL, v9fs_set_super, v9ses);
if (IS_ERR(sb)) {
retval = PTR_ERR(sb);
- goto error;
+ goto free_stat;
}
v9fs_fill_super(sb, v9ses, flags);
inode = v9fs_get_inode(sb, S_IFDIR | mode);
if (IS_ERR(inode)) {
retval = PTR_ERR(inode);
- goto error;
+ goto release_sb;
}
inode->i_uid = uid;
@@ -158,7 +156,7 @@
root = d_alloc_root(inode);
if (!root) {
retval = -ENOMEM;
- goto error;
+ goto release_sb;
}
sb->s_root = root;
@@ -169,21 +167,22 @@
return simple_set_mnt(mnt, sb);
-error:
- kfree(st);
- if (fid)
- p9_client_clunk(fid);
-
- if (v9ses) {
- v9fs_session_close(v9ses);
- kfree(v9ses);
- }
-
+release_sb:
if (sb) {
up_write(&sb->s_umount);
deactivate_super(sb);
}
+free_stat:
+ kfree(st);
+
+clunk_fid:
+ p9_client_clunk(fid);
+
+close_session:
+ v9fs_session_close(v9ses);
+ kfree(v9ses);
+
return retval;
}
diff --git a/fs/Kconfig.binfmt b/fs/Kconfig.binfmt
index 55e8ee1..3263084 100644
--- a/fs/Kconfig.binfmt
+++ b/fs/Kconfig.binfmt
@@ -42,7 +42,7 @@
config BINFMT_FLAT
bool "Kernel support for flat binaries"
- depends on !MMU
+ depends on !MMU && (!FRV || BROKEN)
help
Support uClinux FLAT format binaries.
diff --git a/fs/afs/callback.c b/fs/afs/callback.c
index a78d5b2..587ef51 100644
--- a/fs/afs/callback.c
+++ b/fs/afs/callback.c
@@ -8,7 +8,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
- * Authors: David Woodhouse <dwmw2@cambridge.redhat.com>
+ * Authors: David Woodhouse <dwmw2@infradead.org>
* David Howells <dhowells@redhat.com>
*
*/
diff --git a/fs/afs/inode.c b/fs/afs/inode.c
index 08db82e..bb47217 100644
--- a/fs/afs/inode.c
+++ b/fs/afs/inode.c
@@ -8,7 +8,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
- * Authors: David Woodhouse <dwmw2@cambridge.redhat.com>
+ * Authors: David Woodhouse <dwmw2@infradead.org>
* David Howells <dhowells@redhat.com>
*
*/
diff --git a/fs/afs/super.c b/fs/afs/super.c
index 4b572b8..7e3faee 100644
--- a/fs/afs/super.c
+++ b/fs/afs/super.c
@@ -10,7 +10,7 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Authors: David Howells <dhowells@redhat.com>
- * David Woodhouse <dwmw2@redhat.com>
+ * David Woodhouse <dwmw2@infradead.org>
*
*/
diff --git a/fs/aio.c b/fs/aio.c
index b5253e7..0fb3117 100644
--- a/fs/aio.c
+++ b/fs/aio.c
@@ -591,10 +591,6 @@
atomic_inc(&mm->mm_count);
tsk->mm = mm;
tsk->active_mm = mm;
- /*
- * Note that on UML this *requires* PF_BORROWED_MM to be set, otherwise
- * it won't work. Update it accordingly if you change it here
- */
switch_mm(active_mm, mm, tsk);
task_unlock(tsk);
diff --git a/fs/befs/endian.h b/fs/befs/endian.h
index e254a20..6cb84d8 100644
--- a/fs/befs/endian.h
+++ b/fs/befs/endian.h
@@ -9,7 +9,7 @@
#ifndef LINUX_BEFS_ENDIAN
#define LINUX_BEFS_ENDIAN
-#include <linux/byteorder/generic.h>
+#include <asm/byteorder.h>
static inline u64
fs64_to_cpu(const struct super_block *sb, fs64 n)
diff --git a/fs/binfmt_elf.c b/fs/binfmt_elf.c
index b25707f..0fa95b1 100644
--- a/fs/binfmt_elf.c
+++ b/fs/binfmt_elf.c
@@ -256,7 +256,7 @@
return -EFAULT;
len = strnlen_user((void __user *)p, MAX_ARG_STRLEN);
if (!len || len > MAX_ARG_STRLEN)
- return 0;
+ return -EINVAL;
p += len;
}
if (__put_user(0, argv))
@@ -268,7 +268,7 @@
return -EFAULT;
len = strnlen_user((void __user *)p, MAX_ARG_STRLEN);
if (!len || len > MAX_ARG_STRLEN)
- return 0;
+ return -EINVAL;
p += len;
}
if (__put_user(0, envp))
@@ -1900,7 +1900,7 @@
/* alloc memory for large data structures: too large to be on stack */
elf = kmalloc(sizeof(*elf), GFP_KERNEL);
if (!elf)
- goto cleanup;
+ goto out;
segs = current->mm->map_count;
#ifdef ELF_CORE_EXTRA_PHDRS
@@ -2034,8 +2034,9 @@
set_fs(fs);
cleanup:
- kfree(elf);
free_note_info(&info);
+ kfree(elf);
+out:
return has_dumped;
}
diff --git a/fs/binfmt_elf_fdpic.c b/fs/binfmt_elf_fdpic.c
index ddd35d8..d051a32 100644
--- a/fs/binfmt_elf_fdpic.c
+++ b/fs/binfmt_elf_fdpic.c
@@ -390,7 +390,7 @@
}
/* expand the stack mapping to use up the entire allocation granule */
- fullsize = ksize((char *) current->mm->start_brk);
+ fullsize = kobjsize((char *) current->mm->start_brk);
if (!IS_ERR_VALUE(do_mremap(current->mm->start_brk, stack_size,
fullsize, 0, 0)))
stack_size = fullsize;
diff --git a/fs/binfmt_flat.c b/fs/binfmt_flat.c
index 3b40d45..2cb1acd 100644
--- a/fs/binfmt_flat.c
+++ b/fs/binfmt_flat.c
@@ -548,7 +548,7 @@
PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE, 0);
/* Remap to use all availabe slack region space */
if (realdatastart && (realdatastart < (unsigned long)-4096)) {
- reallen = ksize((void *)realdatastart);
+ reallen = kobjsize((void *)realdatastart);
if (reallen > len) {
realdatastart = do_mremap(realdatastart, len,
reallen, MREMAP_FIXED, realdatastart);
@@ -600,7 +600,7 @@
PROT_READ | PROT_EXEC | PROT_WRITE, MAP_PRIVATE, 0);
/* Remap to use all availabe slack region space */
if (textpos && (textpos < (unsigned long) -4096)) {
- reallen = ksize((void *)textpos);
+ reallen = kobjsize((void *)textpos);
if (reallen > len) {
textpos = do_mremap(textpos, len, reallen,
MREMAP_FIXED, textpos);
@@ -683,7 +683,7 @@
*/
current->mm->start_brk = datapos + data_len + bss_len;
current->mm->brk = (current->mm->start_brk + 3) & ~3;
- current->mm->context.end_brk = memp + ksize((void *) memp) - stack_len;
+ current->mm->context.end_brk = memp + kobjsize((void *) memp) - stack_len;
}
if (flags & FLAT_FLAG_KTRACE)
@@ -790,7 +790,7 @@
/* zero the BSS, BRK and stack areas */
memset((void*)(datapos + data_len), 0, bss_len +
- (memp + ksize((void *) memp) - stack_len - /* end brk */
+ (memp + kobjsize((void *) memp) - stack_len - /* end brk */
libinfo->lib_list[id].start_brk) + /* start brk */
stack_len);
diff --git a/fs/block_dev.c b/fs/block_dev.c
index 7d822fa..470c10c 100644
--- a/fs/block_dev.c
+++ b/fs/block_dev.c
@@ -12,6 +12,7 @@
#include <linux/kmod.h>
#include <linux/major.h>
#include <linux/smp_lock.h>
+#include <linux/device_cgroup.h>
#include <linux/highmem.h>
#include <linux/blkdev.h>
#include <linux/module.h>
@@ -928,9 +929,14 @@
{
struct module *owner = NULL;
struct gendisk *disk;
- int ret = -ENXIO;
+ int ret;
int part;
+ ret = devcgroup_inode_permission(bdev->bd_inode, file->f_mode);
+ if (ret != 0)
+ return ret;
+
+ ret = -ENXIO;
file->f_mapping = bdev->bd_inode->i_mapping;
lock_kernel();
disk = get_gendisk(bdev->bd_dev, &part);
diff --git a/fs/cifs/AUTHORS b/fs/cifs/AUTHORS
index 8848e4d..9c136d7 100644
--- a/fs/cifs/AUTHORS
+++ b/fs/cifs/AUTHORS
@@ -36,6 +36,7 @@
Kazeon team for various fixes especially for 2.4 version.
Asser Ferno (Change Notify support)
Shaggy (Dave Kleikamp) for inumerable small fs suggestions and some good cleanup
+Igor Mammedov (DFS support)
Test case and Bug Report contributors
-------------------------------------
diff --git a/fs/cifs/CHANGES b/fs/cifs/CHANGES
index 8355e91..1f34652 100644
--- a/fs/cifs/CHANGES
+++ b/fs/cifs/CHANGES
@@ -1,5 +1,12 @@
Version 1.53
------------
+DFS support added (Microsoft Distributed File System client support needed
+for referrals which enable a hierarchical name space among servers).
+Disable temporary caching of mode bits to servers which do not support
+storing of mode (e.g. Windows servers, when client mounts without cifsacl
+mount option) and add new "dynperm" mount option to enable temporary caching
+of mode (enable old behavior). Fix hang on mount caused when server crashes
+tcp session during negotiate protocol.
Version 1.52
------------
@@ -12,7 +19,8 @@
cifsacl flag). Fix prefixpath path separator so we can handle mounts
with prefixpaths longer than one directory (one path component) when
mounted to Windows servers. Fix slow file open when cifsacl
-enabled.
+enabled. Fix memory leak in FindNext when the SMB call returns -EBADF.
+
Version 1.51
------------
diff --git a/fs/cifs/README b/fs/cifs/README
index 621aa1a..2bd6fe5 100644
--- a/fs/cifs/README
+++ b/fs/cifs/README
@@ -483,6 +483,11 @@
sign Must use packet signing (helps avoid unwanted data modification
by intermediate systems in the route). Note that signing
does not work with lanman or plaintext authentication.
+ seal Must seal (encrypt) all data on this mounted share before
+ sending on the network. Requires support for Unix Extensions.
+ Note that this differs from the sign mount option in that it
+ causes encryption of data sent over this mounted share but other
+ shares mounted to the same server are unaffected.
sec Security mode. Allowed values are:
none attempt to connection as a null user (no name)
krb5 Use Kerberos version 5 authentication
diff --git a/fs/cifs/TODO b/fs/cifs/TODO
index 92c9fea..5aff46c 100644
--- a/fs/cifs/TODO
+++ b/fs/cifs/TODO
@@ -1,4 +1,4 @@
-Version 1.52 January 3, 2008
+Version 1.53 May 20, 2008
A Partial List of Missing Features
==================================
@@ -20,20 +20,21 @@
fs/cifs/connect.c and add back in NTLMSSP code if any servers
need it
-e) ms-dfs and ms-dfs host name resolution cleanup
-
-f) fix NTLMv2 signing when two mounts with different users to same
+e) fix NTLMv2 signing when two mounts with different users to same
server.
-g) Directory entry caching relies on a 1 second timer, rather than
+f) Directory entry caching relies on a 1 second timer, rather than
using FindNotify or equivalent. - (started)
-h) quota support (needs minor kernel change since quota calls
+g) quota support (needs minor kernel change since quota calls
to make it to network filesystems or deviceless filesystems)
-i) investigate sync behavior (including syncpage) and check
+h) investigate sync behavior (including syncpage) and check
for proper behavior of intr/nointr
+i) improve support for very old servers (OS/2 and Win9x for example)
+Including support for changing the time remotely (utimes command).
+
j) hook lower into the sockets api (as NFS/SunRPC does) to avoid the
extra copy in/out of the socket buffers in some cases.
diff --git a/fs/cifs/asn1.c b/fs/cifs/asn1.c
index cb52cbb..f58e41d 100644
--- a/fs/cifs/asn1.c
+++ b/fs/cifs/asn1.c
@@ -186,6 +186,11 @@
}
}
}
+
+ /* don't trust len bigger than ctx buffer */
+ if (*len > ctx->end - ctx->pointer)
+ return 0;
+
return 1;
}
@@ -203,6 +208,10 @@
if (!asn1_length_decode(ctx, &def, &len))
return 0;
+ /* primitive shall be definite, indefinite shall be constructed */
+ if (*con == ASN1_PRI && !def)
+ return 0;
+
if (def)
*eoc = ctx->pointer + len;
else
@@ -389,6 +398,11 @@
unsigned long *optr;
size = eoc - ctx->pointer + 1;
+
+ /* first subid actually encodes first two subids */
+ if (size < 2 || size > ULONG_MAX/sizeof(unsigned long))
+ return 0;
+
*oid = kmalloc(size * sizeof(unsigned long), GFP_ATOMIC);
if (*oid == NULL)
return 0;
diff --git a/fs/cifs/cifs_dfs_ref.c b/fs/cifs/cifs_dfs_ref.c
index f6fdecf..d82374c 100644
--- a/fs/cifs/cifs_dfs_ref.c
+++ b/fs/cifs/cifs_dfs_ref.c
@@ -219,53 +219,6 @@
}
-static char *build_full_dfs_path_from_dentry(struct dentry *dentry)
-{
- char *full_path = NULL;
- char *search_path;
- char *tmp_path;
- size_t l_max_len;
- struct cifs_sb_info *cifs_sb;
-
- if (dentry->d_inode == NULL)
- return NULL;
-
- cifs_sb = CIFS_SB(dentry->d_inode->i_sb);
-
- if (cifs_sb->tcon == NULL)
- return NULL;
-
- search_path = build_path_from_dentry(dentry);
- if (search_path == NULL)
- return NULL;
-
- if (cifs_sb->tcon->Flags & SMB_SHARE_IS_IN_DFS) {
- int i;
- /* we should use full path name for correct working with DFS */
- l_max_len = strnlen(cifs_sb->tcon->treeName, MAX_TREE_SIZE+1) +
- strnlen(search_path, MAX_PATHCONF) + 1;
- tmp_path = kmalloc(l_max_len, GFP_KERNEL);
- if (tmp_path == NULL) {
- kfree(search_path);
- return NULL;
- }
- strncpy(tmp_path, cifs_sb->tcon->treeName, l_max_len);
- tmp_path[l_max_len-1] = 0;
- if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_POSIX_PATHS)
- for (i = 0; i < l_max_len; i++) {
- if (tmp_path[i] == '\\')
- tmp_path[i] = '/';
- }
- strncat(tmp_path, search_path, l_max_len - strlen(tmp_path));
-
- full_path = tmp_path;
- kfree(search_path);
- } else {
- full_path = search_path;
- }
- return full_path;
-}
-
static int add_mount_helper(struct vfsmount *newmnt, struct nameidata *nd,
struct list_head *mntlist)
{
@@ -333,7 +286,7 @@
goto out_err;
}
- full_path = build_full_dfs_path_from_dentry(dentry);
+ full_path = build_path_from_dentry(dentry);
if (full_path == NULL) {
rc = -ENOMEM;
goto out_err;
diff --git a/fs/cifs/cifs_fs_sb.h b/fs/cifs/cifs_fs_sb.h
index 8ad2330..877c854 100644
--- a/fs/cifs/cifs_fs_sb.h
+++ b/fs/cifs/cifs_fs_sb.h
@@ -30,6 +30,7 @@
#define CIFS_MOUNT_CIFS_ACL 0x200 /* send ACL requests to non-POSIX srv */
#define CIFS_MOUNT_OVERR_UID 0x400 /* override uid returned from server */
#define CIFS_MOUNT_OVERR_GID 0x800 /* override gid returned from server */
+#define CIFS_MOUNT_DYNPERM 0x1000 /* allow in-memory only mode setting */
struct cifs_sb_info {
struct cifsTconInfo *tcon; /* primary mount */
diff --git a/fs/cifs/cifs_spnego.c b/fs/cifs/cifs_spnego.c
index 6653e29..7013aaf 100644
--- a/fs/cifs/cifs_spnego.c
+++ b/fs/cifs/cifs_spnego.c
@@ -119,6 +119,9 @@
dp = description + strlen(description);
sprintf(dp, ";uid=0x%x", sesInfo->linux_uid);
+ dp = description + strlen(description);
+ sprintf(dp, ";user=%s", sesInfo->userName);
+
cFYI(1, ("key description = %s", description));
spnego_key = request_key(&cifs_spnego_key_type, description, "");
diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c
index 427a7c6..86b4d5f 100644
--- a/fs/cifs/cifsfs.c
+++ b/fs/cifs/cifsfs.c
@@ -1,7 +1,7 @@
/*
* fs/cifs/cifsfs.c
*
- * Copyright (C) International Business Machines Corp., 2002,2007
+ * Copyright (C) International Business Machines Corp., 2002,2008
* Author(s): Steve French (sfrench@us.ibm.com)
*
* Common Internet FileSystem (CIFS) client
@@ -97,9 +97,6 @@
{
struct inode *inode;
struct cifs_sb_info *cifs_sb;
-#ifdef CONFIG_CIFS_DFS_UPCALL
- int len;
-#endif
int rc = 0;
/* BB should we make this contingent on mount parm? */
@@ -117,15 +114,17 @@
* complex operation (mount), and in case of fail
* just exit instead of doing mount and attempting
* undo it if this copy fails?*/
- len = strlen(data);
- cifs_sb->mountdata = kzalloc(len + 1, GFP_KERNEL);
- if (cifs_sb->mountdata == NULL) {
- kfree(sb->s_fs_info);
- sb->s_fs_info = NULL;
- return -ENOMEM;
+ if (data) {
+ int len = strlen(data);
+ cifs_sb->mountdata = kzalloc(len + 1, GFP_KERNEL);
+ if (cifs_sb->mountdata == NULL) {
+ kfree(sb->s_fs_info);
+ sb->s_fs_info = NULL;
+ return -ENOMEM;
+ }
+ strncpy(cifs_sb->mountdata, data, len + 1);
+ cifs_sb->mountdata[len] = '\0';
}
- strncpy(cifs_sb->mountdata, data, len + 1);
- cifs_sb->mountdata[len] = '\0';
#endif
rc = cifs_mount(sb, cifs_sb, data, devname);
@@ -353,9 +352,41 @@
if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_OVERR_GID) ||
!(cifs_sb->tcon->unix_ext))
seq_printf(s, ",gid=%d", cifs_sb->mnt_gid);
+ if (!cifs_sb->tcon->unix_ext) {
+ seq_printf(s, ",file_mode=0%o,dir_mode=0%o",
+ cifs_sb->mnt_file_mode,
+ cifs_sb->mnt_dir_mode);
+ }
+ if (cifs_sb->tcon->seal)
+ seq_printf(s, ",seal");
+ if (cifs_sb->tcon->nocase)
+ seq_printf(s, ",nocase");
+ if (cifs_sb->tcon->retry)
+ seq_printf(s, ",hard");
}
if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_POSIX_PATHS)
seq_printf(s, ",posixpaths");
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SET_UID)
+ seq_printf(s, ",setuids");
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM)
+ seq_printf(s, ",serverino");
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DIRECT_IO)
+ seq_printf(s, ",directio");
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_NO_XATTR)
+ seq_printf(s, ",nouser_xattr");
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR)
+ seq_printf(s, ",mapchars");
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL)
+ seq_printf(s, ",sfu");
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_NO_BRL)
+ seq_printf(s, ",nobrl");
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_ACL)
+ seq_printf(s, ",cifsacl");
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DYNPERM)
+ seq_printf(s, ",dynperm");
+ if (m->mnt_sb->s_flags & MS_POSIXACL)
+ seq_printf(s, ",acl");
+
seq_printf(s, ",rsize=%d", cifs_sb->rsize);
seq_printf(s, ",wsize=%d", cifs_sb->wsize);
}
@@ -657,7 +688,7 @@
.splice_read = generic_file_splice_read,
.llseek = cifs_llseek,
#ifdef CONFIG_CIFS_POSIX
- .ioctl = cifs_ioctl,
+ .unlocked_ioctl = cifs_ioctl,
#endif /* CONFIG_CIFS_POSIX */
#ifdef CONFIG_CIFS_EXPERIMENTAL
@@ -677,7 +708,7 @@
.flush = cifs_flush,
.splice_read = generic_file_splice_read,
#ifdef CONFIG_CIFS_POSIX
- .ioctl = cifs_ioctl,
+ .unlocked_ioctl = cifs_ioctl,
#endif /* CONFIG_CIFS_POSIX */
.llseek = cifs_llseek,
#ifdef CONFIG_CIFS_EXPERIMENTAL
@@ -697,7 +728,7 @@
.splice_read = generic_file_splice_read,
.llseek = cifs_llseek,
#ifdef CONFIG_CIFS_POSIX
- .ioctl = cifs_ioctl,
+ .unlocked_ioctl = cifs_ioctl,
#endif /* CONFIG_CIFS_POSIX */
#ifdef CONFIG_CIFS_EXPERIMENTAL
@@ -716,7 +747,7 @@
.flush = cifs_flush,
.splice_read = generic_file_splice_read,
#ifdef CONFIG_CIFS_POSIX
- .ioctl = cifs_ioctl,
+ .unlocked_ioctl = cifs_ioctl,
#endif /* CONFIG_CIFS_POSIX */
.llseek = cifs_llseek,
#ifdef CONFIG_CIFS_EXPERIMENTAL
@@ -731,7 +762,7 @@
#ifdef CONFIG_CIFS_EXPERIMENTAL
.dir_notify = cifs_dir_notify,
#endif /* CONFIG_CIFS_EXPERIMENTAL */
- .ioctl = cifs_ioctl,
+ .unlocked_ioctl = cifs_ioctl,
};
static void
diff --git a/fs/cifs/cifsfs.h b/fs/cifs/cifsfs.h
index cd1301a..25a6cbd 100644
--- a/fs/cifs/cifsfs.h
+++ b/fs/cifs/cifsfs.h
@@ -95,8 +95,7 @@
size_t, int);
extern ssize_t cifs_getxattr(struct dentry *, const char *, void *, size_t);
extern ssize_t cifs_listxattr(struct dentry *, char *, size_t);
-extern int cifs_ioctl(struct inode *inode, struct file *filep,
- unsigned int command, unsigned long arg);
+extern long cifs_ioctl(struct file *filep, unsigned int cmd, unsigned long arg);
#ifdef CONFIG_CIFS_EXPERIMENTAL
extern const struct export_operations cifs_export_ops;
diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h
index b7d9f69..9cfcf32 100644
--- a/fs/cifs/cifsglob.h
+++ b/fs/cifs/cifsglob.h
@@ -281,6 +281,7 @@
bool ipc:1; /* set if connection to IPC$ eg for RPC/PIPES */
bool retry:1;
bool nocase:1;
+ bool seal:1; /* transport encryption for this mounted share */
bool unix_ext:1; /* if false disable Linux extensions to CIFS protocol
for this mount even if server would support */
/* BB add field for back pointer to sb struct(s)? */
@@ -332,7 +333,6 @@
bool messageMode:1; /* for pipes: message vs byte mode */
atomic_t wrtPending; /* handle in use - defer close */
struct semaphore fh_sem; /* prevents reopen race after dead ses*/
- char *search_resume_name; /* BB removeme BB */
struct cifs_search_info srch_inf;
};
@@ -625,7 +625,7 @@
GLOBAL_EXTERN atomic_t tcpSesReconnectCount;
GLOBAL_EXTERN atomic_t tconInfoReconnectCount;
-/* Various Debug counters to remove someday (BB) */
+/* Various Debug counters */
GLOBAL_EXTERN atomic_t bufAllocCount; /* current number allocated */
#ifdef CONFIG_CIFS_STATS2
GLOBAL_EXTERN atomic_t totBufAllocCount; /* total allocated over all time */
diff --git a/fs/cifs/cifspdu.h b/fs/cifs/cifspdu.h
index a0d26b5..0f327c2 100644
--- a/fs/cifs/cifspdu.h
+++ b/fs/cifs/cifspdu.h
@@ -79,6 +79,19 @@
#define TRANS2_GET_DFS_REFERRAL 0x10
#define TRANS2_REPORT_DFS_INCOSISTENCY 0x11
+/* SMB Transact (Named Pipe) subcommand codes */
+#define TRANS_SET_NMPIPE_STATE 0x0001
+#define TRANS_RAW_READ_NMPIPE 0x0011
+#define TRANS_QUERY_NMPIPE_STATE 0x0021
+#define TRANS_QUERY_NMPIPE_INFO 0x0022
+#define TRANS_PEEK_NMPIPE 0x0023
+#define TRANS_TRANSACT_NMPIPE 0x0026
+#define TRANS_RAW_WRITE_NMPIPE 0x0031
+#define TRANS_READ_NMPIPE 0x0036
+#define TRANS_WRITE_NMPIPE 0x0037
+#define TRANS_WAIT_NMPIPE 0x0053
+#define TRANS_CALL_NMPIPE 0x0054
+
/* NT Transact subcommand codes */
#define NT_TRANSACT_CREATE 0x01
#define NT_TRANSACT_IOCTL 0x02
@@ -328,18 +341,20 @@
#define CREATE_COMPLETE_IF_OPLK 0x00000100 /* should be zero */
#define CREATE_NO_EA_KNOWLEDGE 0x00000200
#define CREATE_EIGHT_DOT_THREE 0x00000400 /* doc says this is obsolete
- open for recovery flag - should
- be zero */
+ "open for recovery" flag - should
+ be zero in any case */
+#define CREATE_OPEN_FOR_RECOVERY 0x00000400
#define CREATE_RANDOM_ACCESS 0x00000800
#define CREATE_DELETE_ON_CLOSE 0x00001000
#define CREATE_OPEN_BY_ID 0x00002000
-#define CREATE_OPEN_BACKUP_INTN 0x00004000
+#define CREATE_OPEN_BACKUP_INTENT 0x00004000
#define CREATE_NO_COMPRESSION 0x00008000
#define CREATE_RESERVE_OPFILTER 0x00100000 /* should be zero */
#define OPEN_REPARSE_POINT 0x00200000
#define OPEN_NO_RECALL 0x00400000
#define OPEN_FREE_SPACE_QUERY 0x00800000 /* should be zero */
#define CREATE_OPTIONS_MASK 0x007FFFFF
+#define CREATE_OPTION_READONLY 0x10000000
#define CREATE_OPTION_SPECIAL 0x20000000 /* system. NB not sent over wire */
/* ImpersonationLevel flags */
@@ -721,7 +736,6 @@
#define SMB_CSC_CACHE_AUTO_REINT 0x0004
#define SMB_CSC_CACHE_VDO 0x0008
#define SMB_CSC_NO_CACHING 0x000C
-
#define SMB_UNIQUE_FILE_NAME 0x0010
#define SMB_EXTENDED_SIGNATURES 0x0020
@@ -805,7 +819,7 @@
#define ICOUNT_MASK 0x00FF
#define PIPE_READ_MODE 0x0100
#define NAMED_PIPE_TYPE 0x0400
-#define PIPE_END_POINT 0x0800
+#define PIPE_END_POINT 0x4000
#define BLOCKING_NAMED_PIPE 0x8000
typedef struct smb_com_open_req { /* also handles create */
@@ -1903,19 +1917,26 @@
char RequestFileName[1];
} __attribute__((packed)) TRANSACTION2_GET_DFS_REFER_REQ;
+#define DFS_VERSION cpu_to_le16(0x0003)
+
+/* DFS server target type */
+#define DFS_TYPE_LINK 0x0000 /* also for sysvol targets */
+#define DFS_TYPE_ROOT 0x0001
+
+/* Referral Entry Flags */
+#define DFS_NAME_LIST_REF 0x0200
+
typedef struct dfs_referral_level_3 {
__le16 VersionNumber;
- __le16 ReferralSize;
- __le16 ServerType; /* 0x0001 = CIFS server */
- __le16 ReferralFlags; /* or proximity - not clear which since it is
- always set to zero - SNIA spec says 0x01
- means strip off PathConsumed chars before
- submitting RequestFileName to remote node */
- __le16 TimeToLive;
- __le16 Proximity;
+ __le16 Size;
+ __le16 ServerType; /* 0x0001 = root targets; 0x0000 = link targets */
+ __le16 ReferralEntryFlags; /* 0x0200 bit set only for domain
+ or DC referral responce */
+ __le32 TimeToLive;
__le16 DfsPathOffset;
__le16 DfsAlternatePathOffset;
- __le16 NetworkAddressOffset;
+ __le16 NetworkAddressOffset; /* offset of the link target */
+ __le16 ServiceSiteGuid;
} __attribute__((packed)) REFERRAL3;
typedef struct smb_com_transaction_get_dfs_refer_rsp {
diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h
index d481f6c..b9f5e93 100644
--- a/fs/cifs/cifsproto.h
+++ b/fs/cifs/cifsproto.h
@@ -93,7 +93,7 @@
extern int cifs_get_inode_info(struct inode **pinode,
const unsigned char *search_path,
- FILE_ALL_INFO * pfile_info,
+ FILE_ALL_INFO *pfile_info,
struct super_block *sb, int xid, const __u16 *pfid);
extern int cifs_get_inode_info_unix(struct inode **pinode,
const unsigned char *search_path,
@@ -130,7 +130,7 @@
extern int CIFSSMBQPathInfo(const int xid, struct cifsTconInfo *tcon,
const unsigned char *searchName,
- FILE_ALL_INFO * findData,
+ FILE_ALL_INFO *findData,
int legacy /* whether to use old info level */,
const struct nls_table *nls_codepage, int remap);
extern int SMBQueryInformation(const int xid, struct cifsTconInfo *tcon,
@@ -141,18 +141,15 @@
extern int CIFSSMBUnixQPathInfo(const int xid,
struct cifsTconInfo *tcon,
const unsigned char *searchName,
- FILE_UNIX_BASIC_INFO * pFindData,
+ FILE_UNIX_BASIC_INFO *pFindData,
const struct nls_table *nls_codepage, int remap);
extern int CIFSGetDFSRefer(const int xid, struct cifsSesInfo *ses,
const unsigned char *searchName,
- unsigned char **targetUNCs,
- unsigned int *number_of_UNC_in_array,
+ struct dfs_info3_param **target_nodes,
+ unsigned int *number_of_nodes_in_array,
const struct nls_table *nls_codepage, int remap);
-extern int connect_to_dfs_path(int xid, struct cifsSesInfo *pSesInfo,
- const char *old_path,
- const struct nls_table *nls_codepage, int remap);
extern int get_dfs_path(int xid, struct cifsSesInfo *pSesInfo,
const char *old_path,
const struct nls_table *nls_codepage,
diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c
index cfd9750..4511b70 100644
--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -81,6 +81,40 @@
#endif /* CONFIG_CIFS_WEAK_PW_HASH */
#endif /* CIFS_POSIX */
+/* Allocates buffer into dst and copies smb string from src to it.
+ * caller is responsible for freeing dst if function returned 0.
+ * returns:
+ * on success - 0
+ * on failure - errno
+ */
+static int
+cifs_strncpy_to_host(char **dst, const char *src, const int maxlen,
+ const bool is_unicode, const struct nls_table *nls_codepage)
+{
+ int plen;
+
+ if (is_unicode) {
+ plen = UniStrnlen((wchar_t *)src, maxlen);
+ *dst = kmalloc(plen + 2, GFP_KERNEL);
+ if (!*dst)
+ goto cifs_strncpy_to_host_ErrExit;
+ cifs_strfromUCS_le(*dst, (__le16 *)src, plen, nls_codepage);
+ } else {
+ plen = strnlen(src, maxlen);
+ *dst = kmalloc(plen + 2, GFP_KERNEL);
+ if (!*dst)
+ goto cifs_strncpy_to_host_ErrExit;
+ strncpy(*dst, src, plen);
+ }
+ (*dst)[plen] = 0;
+ (*dst)[plen+1] = 0; /* harmless for ASCII case, needed for Unicode */
+ return 0;
+
+cifs_strncpy_to_host_ErrExit:
+ cERROR(1, ("Failed to allocate buffer for string\n"));
+ return -ENOMEM;
+}
+
/* Mark as invalid, all open files on tree connections since they
were closed when session to server was lost */
@@ -1166,6 +1200,20 @@
return ofun;
}
+static int
+access_flags_to_smbopen_mode(const int access_flags)
+{
+ int masked_flags = access_flags & (GENERIC_READ | GENERIC_WRITE);
+
+ if (masked_flags == GENERIC_READ)
+ return SMBOPEN_READ;
+ else if (masked_flags == GENERIC_WRITE)
+ return SMBOPEN_WRITE;
+
+ /* just go for read/write */
+ return SMBOPEN_READWRITE;
+}
+
int
SMBLegacyOpen(const int xid, struct cifsTconInfo *tcon,
const char *fileName, const int openDisposition,
@@ -1207,13 +1255,7 @@
pSMB->OpenFlags = cpu_to_le16(REQ_BATCHOPLOCK);
pSMB->OpenFlags |= cpu_to_le16(REQ_MORE_INFO);
- /* BB fixme add conversion for access_flags to bits 0 - 2 of mode */
- /* 0 = read
- 1 = write
- 2 = rw
- 3 = execute
- */
- pSMB->Mode = cpu_to_le16(2);
+ pSMB->Mode = cpu_to_le16(access_flags_to_smbopen_mode(access_flags));
pSMB->Mode |= cpu_to_le16(0x40); /* deny none */
/* set file as system file if special file such
as fifo and server expecting SFU style and
@@ -1224,11 +1266,8 @@
else /* BB FIXME BB */
pSMB->FileAttributes = cpu_to_le16(0/*ATTR_NORMAL*/);
- /* if ((omode & S_IWUGO) == 0)
- pSMB->FileAttributes |= cpu_to_le32(ATTR_READONLY);*/
- /* Above line causes problems due to vfs splitting create into two
- pieces - need to set mode after file created not while it is
- being created */
+ if (create_options & CREATE_OPTION_READONLY)
+ pSMB->FileAttributes |= cpu_to_le16(ATTR_READONLY);
/* BB FIXME BB */
/* pSMB->CreateOptions = cpu_to_le32(create_options &
@@ -1250,7 +1289,7 @@
} else {
/* BB verify if wct == 15 */
-/* *pOplock = pSMBr->OplockLevel; */ /* BB take from action field BB */
+/* *pOplock = pSMBr->OplockLevel; */ /* BB take from action field*/
*netfid = pSMBr->Fid; /* cifs fid stays in le */
/* Let caller know file was created so we can set the mode. */
@@ -1331,17 +1370,16 @@
pSMB->FileAttributes = cpu_to_le32(ATTR_SYSTEM);
else
pSMB->FileAttributes = cpu_to_le32(ATTR_NORMAL);
+
/* XP does not handle ATTR_POSIX_SEMANTICS */
/* but it helps speed up case sensitive checks for other
servers such as Samba */
if (tcon->ses->capabilities & CAP_UNIX)
pSMB->FileAttributes |= cpu_to_le32(ATTR_POSIX_SEMANTICS);
- /* if ((omode & S_IWUGO) == 0)
- pSMB->FileAttributes |= cpu_to_le32(ATTR_READONLY);*/
- /* Above line causes problems due to vfs splitting create into two
- pieces - need to set mode after file created not while it is
- being created */
+ if (create_options & CREATE_OPTION_READONLY)
+ pSMB->FileAttributes |= cpu_to_le32(ATTR_READONLY);
+
pSMB->ShareAccess = cpu_to_le32(FILE_SHARE_ALL);
pSMB->CreateDisposition = cpu_to_le32(openDisposition);
pSMB->CreateOptions = cpu_to_le32(create_options & CREATE_OPTIONS_MASK);
@@ -1690,7 +1728,7 @@
{
int rc = 0;
LOCK_REQ *pSMB = NULL;
- LOCK_RSP *pSMBr = NULL;
+/* LOCK_RSP *pSMBr = NULL; */ /* No response data other than rc to parse */
int bytes_returned;
int timeout = 0;
__u16 count;
@@ -1701,8 +1739,6 @@
if (rc)
return rc;
- pSMBr = (LOCK_RSP *)pSMB; /* BB removeme BB */
-
if (lockType == LOCKING_ANDX_OPLOCK_RELEASE) {
timeout = CIFS_ASYNC_OP; /* no response expected */
pSMB->Timeout = 0;
@@ -1736,7 +1772,7 @@
if (waitFlag) {
rc = SendReceiveBlockingLock(xid, tcon, (struct smb_hdr *) pSMB,
- (struct smb_hdr *) pSMBr, &bytes_returned);
+ (struct smb_hdr *) pSMB, &bytes_returned);
cifs_small_buf_release(pSMB);
} else {
rc = SendReceiveNoRsp(xid, tcon->ses, (struct smb_hdr *)pSMB,
@@ -1771,7 +1807,7 @@
cFYI(1, ("Posix Lock"));
if (pLockData == NULL)
- return EINVAL;
+ return -EINVAL;
rc = small_smb_init(SMB_COM_TRANSACTION2, 15, tcon, (void **) &pSMB);
@@ -1948,7 +1984,7 @@
/* protocol requires ASCII signature byte on Unicode string */
pSMB->OldFileName[name_len + 1] = 0x00;
name_len2 =
- cifsConvertToUCS((__le16 *) &pSMB->OldFileName[name_len + 2],
+ cifsConvertToUCS((__le16 *)&pSMB->OldFileName[name_len + 2],
toName, PATH_MAX, nls_codepage, remap);
name_len2 += 1 /* trailing null */ + 1 /* Signature word */ ;
name_len2 *= 2; /* convert to bytes */
@@ -2121,8 +2157,7 @@
cFYI(1, ("Send error in copy = %d with %d files copied",
rc, le16_to_cpu(pSMBr->CopyCount)));
}
- if (pSMB)
- cifs_buf_release(pSMB);
+ cifs_buf_release(pSMB);
if (rc == -EAGAIN)
goto copyRetry;
@@ -2211,8 +2246,7 @@
if (rc)
cFYI(1, ("Send error in SetPathInfo create symlink = %d", rc));
- if (pSMB)
- cifs_buf_release(pSMB);
+ cifs_buf_release(pSMB);
if (rc == -EAGAIN)
goto createSymLinkRetry;
@@ -2929,7 +2963,8 @@
}
params = 6 + name_len;
pSMB->MaxParameterCount = cpu_to_le16(2);
- pSMB->MaxDataCount = cpu_to_le16(1000); /* BB find max SMB size from sess */
+ /* BB find max SMB size from sess */
+ pSMB->MaxDataCount = cpu_to_le16(1000);
pSMB->MaxSetupCount = 0;
pSMB->Reserved = 0;
pSMB->Flags = 0;
@@ -3326,7 +3361,8 @@
params = 2 /* level */ + 4 /* reserved */ + name_len /* includes NUL */;
pSMB->TotalDataCount = 0;
pSMB->MaxParameterCount = cpu_to_le16(2);
- pSMB->MaxDataCount = cpu_to_le16(4000); /* BB find exact max SMB PDU from sess structure BB */
+ /* BB find exact max SMB PDU from sess structure BB */
+ pSMB->MaxDataCount = cpu_to_le16(4000);
pSMB->MaxSetupCount = 0;
pSMB->Reserved = 0;
pSMB->Flags = 0;
@@ -3392,7 +3428,7 @@
int
CIFSSMBUnixQPathInfo(const int xid, struct cifsTconInfo *tcon,
const unsigned char *searchName,
- FILE_UNIX_BASIC_INFO * pFindData,
+ FILE_UNIX_BASIC_INFO *pFindData,
const struct nls_table *nls_codepage, int remap)
{
/* SMB_QUERY_FILE_UNIX_BASIC */
@@ -3683,6 +3719,7 @@
if (rc) {
if (rc == -EBADF) {
psrch_inf->endOfSearch = true;
+ cifs_buf_release(pSMB);
rc = 0; /* search probably was closed at end of search*/
} else
cFYI(1, ("FindNext returned = %d", rc));
@@ -3860,25 +3897,112 @@
return rc;
}
+/* parses DFS refferal V3 structure
+ * caller is responsible for freeing target_nodes
+ * returns:
+ * on success - 0
+ * on failure - errno
+ */
+static int
+parse_DFS_referrals(TRANSACTION2_GET_DFS_REFER_RSP *pSMBr,
+ unsigned int *num_of_nodes,
+ struct dfs_info3_param **target_nodes,
+ const struct nls_table *nls_codepage)
+{
+ int i, rc = 0;
+ char *data_end;
+ bool is_unicode;
+ struct dfs_referral_level_3 *ref;
+
+ is_unicode = pSMBr->hdr.Flags2 & SMBFLG2_UNICODE;
+ *num_of_nodes = le16_to_cpu(pSMBr->NumberOfReferrals);
+
+ if (*num_of_nodes < 1) {
+ cERROR(1, ("num_referrals: must be at least > 0,"
+ "but we get num_referrals = %d\n", *num_of_nodes));
+ rc = -EINVAL;
+ goto parse_DFS_referrals_exit;
+ }
+
+ ref = (struct dfs_referral_level_3 *) &(pSMBr->referrals);
+ if (ref->VersionNumber != cpu_to_le16(3)) {
+ cERROR(1, ("Referrals of V%d version are not supported,"
+ "should be V3", le16_to_cpu(ref->VersionNumber)));
+ rc = -EINVAL;
+ goto parse_DFS_referrals_exit;
+ }
+
+ /* get the upper boundary of the resp buffer */
+ data_end = (char *)(&(pSMBr->PathConsumed)) +
+ le16_to_cpu(pSMBr->t2.DataCount);
+
+ cFYI(1, ("num_referrals: %d dfs flags: 0x%x ... \n",
+ *num_of_nodes,
+ le16_to_cpu(pSMBr->DFSFlags)));
+
+ *target_nodes = kzalloc(sizeof(struct dfs_info3_param) *
+ *num_of_nodes, GFP_KERNEL);
+ if (*target_nodes == NULL) {
+ cERROR(1, ("Failed to allocate buffer for target_nodes\n"));
+ rc = -ENOMEM;
+ goto parse_DFS_referrals_exit;
+ }
+
+ /* collect neccessary data from referrals */
+ for (i = 0; i < *num_of_nodes; i++) {
+ char *temp;
+ int max_len;
+ struct dfs_info3_param *node = (*target_nodes)+i;
+
+ node->flags = le16_to_cpu(pSMBr->DFSFlags);
+ node->path_consumed = le16_to_cpu(pSMBr->PathConsumed);
+ node->server_type = le16_to_cpu(ref->ServerType);
+ node->ref_flag = le16_to_cpu(ref->ReferralEntryFlags);
+
+ /* copy DfsPath */
+ temp = (char *)ref + le16_to_cpu(ref->DfsPathOffset);
+ max_len = data_end - temp;
+ rc = cifs_strncpy_to_host(&(node->path_name), temp,
+ max_len, is_unicode, nls_codepage);
+ if (rc)
+ goto parse_DFS_referrals_exit;
+
+ /* copy link target UNC */
+ temp = (char *)ref + le16_to_cpu(ref->NetworkAddressOffset);
+ max_len = data_end - temp;
+ rc = cifs_strncpy_to_host(&(node->node_name), temp,
+ max_len, is_unicode, nls_codepage);
+ if (rc)
+ goto parse_DFS_referrals_exit;
+
+ ref += le16_to_cpu(ref->Size);
+ }
+
+parse_DFS_referrals_exit:
+ if (rc) {
+ free_dfs_info_array(*target_nodes, *num_of_nodes);
+ *target_nodes = NULL;
+ *num_of_nodes = 0;
+ }
+ return rc;
+}
+
int
CIFSGetDFSRefer(const int xid, struct cifsSesInfo *ses,
const unsigned char *searchName,
- unsigned char **targetUNCs,
- unsigned int *number_of_UNC_in_array,
+ struct dfs_info3_param **target_nodes,
+ unsigned int *num_of_nodes,
const struct nls_table *nls_codepage, int remap)
{
/* TRANS2_GET_DFS_REFERRAL */
TRANSACTION2_GET_DFS_REFER_REQ *pSMB = NULL;
TRANSACTION2_GET_DFS_REFER_RSP *pSMBr = NULL;
- struct dfs_referral_level_3 *referrals = NULL;
int rc = 0;
int bytes_returned;
int name_len;
- unsigned int i;
- char *temp;
__u16 params, byte_count;
- *number_of_UNC_in_array = 0;
- *targetUNCs = NULL;
+ *num_of_nodes = 0;
+ *target_nodes = NULL;
cFYI(1, ("In GetDFSRefer the path %s", searchName));
if (ses == NULL)
@@ -3925,7 +4049,8 @@
pSMB->DataCount = 0;
pSMB->DataOffset = 0;
pSMB->MaxParameterCount = 0;
- pSMB->MaxDataCount = cpu_to_le16(4000); /* BB find exact max SMB PDU from sess structure BB */
+ /* BB find exact max SMB PDU from sess structure BB */
+ pSMB->MaxDataCount = cpu_to_le16(4000);
pSMB->MaxSetupCount = 0;
pSMB->Reserved = 0;
pSMB->Flags = 0;
@@ -3947,103 +4072,26 @@
(struct smb_hdr *) pSMBr, &bytes_returned, 0);
if (rc) {
cFYI(1, ("Send error in GetDFSRefer = %d", rc));
- } else { /* decode response */
-/* BB Add logic to parse referrals here */
- rc = validate_t2((struct smb_t2_rsp *)pSMBr);
-
- /* BB Also check if enough total bytes returned? */
- if (rc || (pSMBr->ByteCount < 17))
- rc = -EIO; /* bad smb */
- else {
- __u16 data_offset = le16_to_cpu(pSMBr->t2.DataOffset);
- __u16 data_count = le16_to_cpu(pSMBr->t2.DataCount);
-
- cFYI(1,
- ("Decoding GetDFSRefer response BCC: %d Offset %d",
- pSMBr->ByteCount, data_offset));
- referrals =
- (struct dfs_referral_level_3 *)
- (8 /* sizeof start of data block */ +
- data_offset +
- (char *) &pSMBr->hdr.Protocol);
- cFYI(1, ("num_referrals: %d dfs flags: 0x%x ... \n"
- "for referral one refer size: 0x%x srv "
- "type: 0x%x refer flags: 0x%x ttl: 0x%x",
- le16_to_cpu(pSMBr->NumberOfReferrals),
- le16_to_cpu(pSMBr->DFSFlags),
- le16_to_cpu(referrals->ReferralSize),
- le16_to_cpu(referrals->ServerType),
- le16_to_cpu(referrals->ReferralFlags),
- le16_to_cpu(referrals->TimeToLive)));
- /* BB This field is actually two bytes in from start of
- data block so we could do safety check that DataBlock
- begins at address of pSMBr->NumberOfReferrals */
- *number_of_UNC_in_array =
- le16_to_cpu(pSMBr->NumberOfReferrals);
-
- /* BB Fix below so can return more than one referral */
- if (*number_of_UNC_in_array > 1)
- *number_of_UNC_in_array = 1;
-
- /* get the length of the strings describing refs */
- name_len = 0;
- for (i = 0; i < *number_of_UNC_in_array; i++) {
- /* make sure that DfsPathOffset not past end */
- __u16 offset =
- le16_to_cpu(referrals->DfsPathOffset);
- if (offset > data_count) {
- /* if invalid referral, stop here and do
- not try to copy any more */
- *number_of_UNC_in_array = i;
- break;
- }
- temp = ((char *)referrals) + offset;
-
- if (pSMBr->hdr.Flags2 & SMBFLG2_UNICODE) {
- name_len += UniStrnlen((wchar_t *)temp,
- data_count);
- } else {
- name_len += strnlen(temp, data_count);
- }
- referrals++;
- /* BB add check that referral pointer does
- not fall off end PDU */
- }
- /* BB add check for name_len bigger than bcc */
- *targetUNCs =
- kmalloc(name_len+1+(*number_of_UNC_in_array),
- GFP_KERNEL);
- if (*targetUNCs == NULL) {
- rc = -ENOMEM;
- goto GetDFSRefExit;
- }
- /* copy the ref strings */
- referrals = (struct dfs_referral_level_3 *)
- (8 /* sizeof data hdr */ + data_offset +
- (char *) &pSMBr->hdr.Protocol);
-
- for (i = 0; i < *number_of_UNC_in_array; i++) {
- temp = ((char *)referrals) +
- le16_to_cpu(referrals->DfsPathOffset);
- if (pSMBr->hdr.Flags2 & SMBFLG2_UNICODE) {
- cifs_strfromUCS_le(*targetUNCs,
- (__le16 *) temp,
- name_len,
- nls_codepage);
- } else {
- strncpy(*targetUNCs, temp, name_len);
- }
- /* BB update target_uncs pointers */
- referrals++;
- }
- temp = *targetUNCs;
- temp[name_len] = 0;
- }
-
+ goto GetDFSRefExit;
}
+ rc = validate_t2((struct smb_t2_rsp *)pSMBr);
+
+ /* BB Also check if enough total bytes returned? */
+ if (rc || (pSMBr->ByteCount < 17)) {
+ rc = -EIO; /* bad smb */
+ goto GetDFSRefExit;
+ }
+
+ cFYI(1, ("Decoding GetDFSRefer response BCC: %d Offset %d",
+ pSMBr->ByteCount,
+ le16_to_cpu(pSMBr->t2.DataOffset)));
+
+ /* parse returned result into more usable form */
+ rc = parse_DFS_referrals(pSMBr, num_of_nodes,
+ target_nodes, nls_codepage);
+
GetDFSRefExit:
- if (pSMB)
- cifs_buf_release(pSMB);
+ cifs_buf_release(pSMB);
if (rc == -EAGAIN)
goto getDFSRetry;
@@ -4233,7 +4281,8 @@
params = 2; /* level */
pSMB->TotalDataCount = 0;
pSMB->MaxParameterCount = cpu_to_le16(2);
- pSMB->MaxDataCount = cpu_to_le16(1000); /* BB find exact max SMB PDU from sess structure BB */
+ /* BB find exact max SMB PDU from sess structure BB */
+ pSMB->MaxDataCount = cpu_to_le16(1000);
pSMB->MaxSetupCount = 0;
pSMB->Reserved = 0;
pSMB->Flags = 0;
@@ -4302,7 +4351,8 @@
params = 2; /* level */
pSMB->TotalDataCount = 0;
pSMB->MaxParameterCount = cpu_to_le16(2);
- pSMB->MaxDataCount = cpu_to_le16(1000); /* BB find exact max SMB PDU from sess structure BB */
+ /* BB find exact max SMB PDU from sess structure BB */
+ pSMB->MaxDataCount = cpu_to_le16(1000);
pSMB->MaxSetupCount = 0;
pSMB->Reserved = 0;
pSMB->Flags = 0;
@@ -4373,7 +4423,8 @@
pSMB->DataCount = 0;
pSMB->DataOffset = 0;
pSMB->MaxParameterCount = cpu_to_le16(2);
- pSMB->MaxDataCount = cpu_to_le16(100); /* BB find exact max SMB PDU from sess structure BB */
+ /* BB find exact max SMB PDU from sess structure BB */
+ pSMB->MaxDataCount = cpu_to_le16(100);
pSMB->MaxSetupCount = 0;
pSMB->Reserved = 0;
pSMB->Flags = 0;
@@ -4448,7 +4499,8 @@
offset = param_offset + params;
pSMB->MaxParameterCount = cpu_to_le16(4);
- pSMB->MaxDataCount = cpu_to_le16(100); /* BB find exact max SMB PDU from sess structure BB */
+ /* BB find exact max SMB PDU from sess structure BB */
+ pSMB->MaxDataCount = cpu_to_le16(100);
pSMB->SetupCount = 1;
pSMB->Reserved3 = 0;
pSMB->SubCommand = cpu_to_le16(TRANS2_SET_FS_INFORMATION);
@@ -4516,7 +4568,8 @@
pSMB->DataCount = 0;
pSMB->DataOffset = 0;
pSMB->MaxParameterCount = cpu_to_le16(2);
- pSMB->MaxDataCount = cpu_to_le16(100); /* BB find exact max SMB PDU from sess structure BB */
+ /* BB find exact max SMB PDU from sess structure BB */
+ pSMB->MaxDataCount = cpu_to_le16(100);
pSMB->MaxSetupCount = 0;
pSMB->Reserved = 0;
pSMB->Flags = 0;
@@ -4706,7 +4759,8 @@
count = sizeof(struct file_end_of_file_info);
pSMB->MaxParameterCount = cpu_to_le16(2);
- pSMB->MaxDataCount = cpu_to_le16(1000); /* BB find max SMB PDU from sess */
+ /* BB find exact max SMB PDU from sess structure BB */
+ pSMB->MaxDataCount = cpu_to_le16(1000);
pSMB->SetupCount = 1;
pSMB->Reserved3 = 0;
pSMB->SubCommand = cpu_to_le16(TRANS2_SET_FILE_INFORMATION);
@@ -4793,7 +4847,8 @@
count = sizeof(FILE_BASIC_INFO);
pSMB->MaxParameterCount = cpu_to_le16(2);
- pSMB->MaxDataCount = cpu_to_le16(1000); /* BB find max SMB PDU from sess */
+ /* BB find max SMB PDU from sess */
+ pSMB->MaxDataCount = cpu_to_le16(1000);
pSMB->SetupCount = 1;
pSMB->Reserved3 = 0;
pSMB->SubCommand = cpu_to_le16(TRANS2_SET_FILE_INFORMATION);
@@ -4860,7 +4915,8 @@
params = 6 + name_len;
count = sizeof(FILE_BASIC_INFO);
pSMB->MaxParameterCount = cpu_to_le16(2);
- pSMB->MaxDataCount = cpu_to_le16(1000); /* BB find exact max SMB PDU from sess structure BB */
+ /* BB find max SMB PDU from sess structure BB */
+ pSMB->MaxDataCount = cpu_to_le16(1000);
pSMB->MaxSetupCount = 0;
pSMB->Reserved = 0;
pSMB->Flags = 0;
@@ -4990,7 +5046,8 @@
params = 6 + name_len;
count = sizeof(FILE_UNIX_BASIC_INFO);
pSMB->MaxParameterCount = cpu_to_le16(2);
- pSMB->MaxDataCount = cpu_to_le16(1000); /* BB find exact max SMB PDU from sess structure BB */
+ /* BB find max SMB PDU from sess structure BB */
+ pSMB->MaxDataCount = cpu_to_le16(1000);
pSMB->MaxSetupCount = 0;
pSMB->Reserved = 0;
pSMB->Flags = 0;
@@ -5055,8 +5112,7 @@
if (rc)
cFYI(1, ("SetPathInfo (perms) returned %d", rc));
- if (pSMB)
- cifs_buf_release(pSMB);
+ cifs_buf_release(pSMB);
if (rc == -EAGAIN)
goto setPermsRetry;
return rc;
@@ -5173,7 +5229,8 @@
params = 2 /* level */ + 4 /* reserved */ + name_len /* includes NUL */;
pSMB->TotalDataCount = 0;
pSMB->MaxParameterCount = cpu_to_le16(2);
- pSMB->MaxDataCount = cpu_to_le16(4000); /* BB find exact max SMB PDU from sess structure BB */
+ /* BB find exact max SMB PDU from sess structure BB */
+ pSMB->MaxDataCount = cpu_to_le16(4000);
pSMB->MaxSetupCount = 0;
pSMB->Reserved = 0;
pSMB->Flags = 0;
@@ -5277,8 +5334,7 @@
}
}
}
- if (pSMB)
- cifs_buf_release(pSMB);
+ cifs_buf_release(pSMB);
if (rc == -EAGAIN)
goto QAllEAsRetry;
@@ -5321,7 +5377,8 @@
params = 2 /* level */ + 4 /* reserved */ + name_len /* includes NUL */;
pSMB->TotalDataCount = 0;
pSMB->MaxParameterCount = cpu_to_le16(2);
- pSMB->MaxDataCount = cpu_to_le16(4000); /* BB find exact max SMB PDU from sess structure BB */
+ /* BB find exact max SMB PDU from sess structure BB */
+ pSMB->MaxDataCount = cpu_to_le16(4000);
pSMB->MaxSetupCount = 0;
pSMB->Reserved = 0;
pSMB->Flags = 0;
@@ -5426,8 +5483,7 @@
}
}
}
- if (pSMB)
- cifs_buf_release(pSMB);
+ cifs_buf_release(pSMB);
if (rc == -EAGAIN)
goto QEARetry;
@@ -5479,7 +5535,8 @@
count = sizeof(*parm_data) + ea_value_len + name_len;
pSMB->MaxParameterCount = cpu_to_le16(2);
- pSMB->MaxDataCount = cpu_to_le16(1000); /* BB find max SMB size from sess */
+ /* BB find max SMB PDU from sess */
+ pSMB->MaxDataCount = cpu_to_le16(1000);
pSMB->MaxSetupCount = 0;
pSMB->Reserved = 0;
pSMB->Flags = 0;
diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index 791ca5c..e8fa46c 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -60,7 +60,7 @@
char *domainname;
char *UNC;
char *UNCip;
- char *in6_addr; /* ipv6 address as human readable form of in6_addr */
+ char *in6_addr; /* ipv6 address as human readable form of in6_addr */
char *iocharset; /* local code page for mapping to and from Unicode */
char source_rfc1001_name[16]; /* netbios name of client */
char target_rfc1001_name[16]; /* netbios name of server for Win9x/ME */
@@ -75,19 +75,21 @@
bool setuids:1;
bool override_uid:1;
bool override_gid:1;
+ bool dynperm:1;
bool noperm:1;
bool no_psx_acl:1; /* set if posix acl support should be disabled */
bool cifs_acl:1;
bool no_xattr:1; /* set if xattr (EA) support should be disabled*/
bool server_ino:1; /* use inode numbers from server ie UniqueId */
bool direct_io:1;
- bool remap:1; /* set to remap seven reserved chars in filenames */
- bool posix_paths:1; /* unset to not ask for posix pathnames. */
+ bool remap:1; /* set to remap seven reserved chars in filenames */
+ bool posix_paths:1; /* unset to not ask for posix pathnames. */
bool no_linux_ext:1;
bool sfu_emul:1;
- bool nullauth:1; /* attempt to authenticate with null user */
- unsigned nocase; /* request case insensitive filenames */
- unsigned nobrl; /* disable sending byte range locks to srv */
+ bool nullauth:1; /* attempt to authenticate with null user */
+ bool nocase:1; /* request case insensitive filenames */
+ bool nobrl:1; /* disable sending byte range locks to srv */
+ bool seal:1; /* request transport encryption on share */
unsigned int rsize;
unsigned int wsize;
unsigned int sockopt;
@@ -348,7 +350,6 @@
int reconnect;
current->flags |= PF_MEMALLOC;
- server->tsk = current; /* save process info to wake at shutdown */
cFYI(1, ("Demultiplex PID: %d", task_pid_nr(current)));
write_lock(&GlobalSMBSeslock);
atomic_inc(&tcpSesAllocCount);
@@ -651,10 +652,21 @@
spin_lock(&GlobalMid_Lock);
server->tcpStatus = CifsExiting;
- server->tsk = NULL;
+ spin_unlock(&GlobalMid_Lock);
+ wake_up_all(&server->response_q);
+
+ /* don't exit until kthread_stop is called */
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ while (!kthread_should_stop()) {
+ schedule();
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ }
+ set_current_state(TASK_RUNNING);
+
/* check if we have blocked requests that need to free */
/* Note that cifs_max_pending is normally 50, but
can be set at module install time to as little as two */
+ spin_lock(&GlobalMid_Lock);
if (atomic_read(&server->inFlight) >= cifs_max_pending)
atomic_set(&server->inFlight, cifs_max_pending - 1);
/* We do not want to set the max_pending too low or we
@@ -1237,6 +1249,10 @@
vol->setuids = 1;
} else if (strnicmp(data, "nosetuids", 9) == 0) {
vol->setuids = 0;
+ } else if (strnicmp(data, "dynperm", 7) == 0) {
+ vol->dynperm = true;
+ } else if (strnicmp(data, "nodynperm", 9) == 0) {
+ vol->dynperm = false;
} else if (strnicmp(data, "nohard", 6) == 0) {
vol->retry = 0;
} else if (strnicmp(data, "nosoft", 6) == 0) {
@@ -1259,8 +1275,12 @@
vol->no_psx_acl = 1;
} else if (strnicmp(data, "sign", 4) == 0) {
vol->secFlg |= CIFSSEC_MUST_SIGN;
-/* } else if (strnicmp(data, "seal",4) == 0) {
- vol->secFlg |= CIFSSEC_MUST_SEAL; */
+ } else if (strnicmp(data, "seal", 4) == 0) {
+ /* we do not do the following in secFlags because seal
+ is a per tree connection (mount) not a per socket
+ or per-smb connection option in the protocol */
+ /* vol->secFlg |= CIFSSEC_MUST_SEAL; */
+ vol->seal = 1;
} else if (strnicmp(data, "direct", 6) == 0) {
vol->direct_io = 1;
} else if (strnicmp(data, "forcedirectio", 13) == 0) {
@@ -1318,42 +1338,43 @@
static struct cifsSesInfo *
cifs_find_tcp_session(struct in_addr *target_ip_addr,
- struct in6_addr *target_ip6_addr,
- char *userName, struct TCP_Server_Info **psrvTcp)
+ struct in6_addr *target_ip6_addr,
+ char *userName, struct TCP_Server_Info **psrvTcp)
{
struct list_head *tmp;
struct cifsSesInfo *ses;
- *psrvTcp = NULL;
- read_lock(&GlobalSMBSeslock);
+ *psrvTcp = NULL;
+
+ read_lock(&GlobalSMBSeslock);
list_for_each(tmp, &GlobalSMBSessionList) {
ses = list_entry(tmp, struct cifsSesInfo, cifsSessionList);
- if (ses->server) {
- if ((target_ip_addr &&
- (ses->server->addr.sockAddr.sin_addr.s_addr
- == target_ip_addr->s_addr)) || (target_ip6_addr
- && memcmp(&ses->server->addr.sockAddr6.sin6_addr,
- target_ip6_addr, sizeof(*target_ip6_addr)))) {
- /* BB lock server and tcp session and increment
- use count here?? */
+ if (!ses->server)
+ continue;
- /* found a match on the TCP session */
- *psrvTcp = ses->server;
+ if (target_ip_addr &&
+ ses->server->addr.sockAddr.sin_addr.s_addr != target_ip_addr->s_addr)
+ continue;
+ else if (target_ip6_addr &&
+ memcmp(&ses->server->addr.sockAddr6.sin6_addr,
+ target_ip6_addr, sizeof(*target_ip6_addr)))
+ continue;
+ /* BB lock server and tcp session; increment use count here?? */
- /* BB check if reconnection needed */
- if (strncmp
- (ses->userName, userName,
- MAX_USERNAME_SIZE) == 0){
- read_unlock(&GlobalSMBSeslock);
- /* Found exact match on both TCP and
- SMB sessions */
- return ses;
- }
- }
+ /* found a match on the TCP session */
+ *psrvTcp = ses->server;
+
+ /* BB check if reconnection needed */
+ if (strncmp(ses->userName, userName, MAX_USERNAME_SIZE) == 0) {
+ read_unlock(&GlobalSMBSeslock);
+ /* Found exact match on both TCP and
+ SMB sessions */
+ return ses;
}
/* else tcp and smb sessions need reconnection */
}
read_unlock(&GlobalSMBSeslock);
+
return NULL;
}
@@ -1404,34 +1425,12 @@
}
int
-connect_to_dfs_path(int xid, struct cifsSesInfo *pSesInfo,
- const char *old_path, const struct nls_table *nls_codepage,
- int remap)
-{
- struct dfs_info3_param *referrals = NULL;
- unsigned int num_referrals;
- int rc = 0;
-
- rc = get_dfs_path(xid, pSesInfo, old_path, nls_codepage,
- &num_referrals, &referrals, remap);
-
- /* BB Add in code to: if valid refrl, if not ip address contact
- the helper that resolves tcp names, mount to it, try to
- tcon to it unmount it if fail */
-
- kfree(referrals);
-
- return rc;
-}
-
-int
get_dfs_path(int xid, struct cifsSesInfo *pSesInfo, const char *old_path,
const struct nls_table *nls_codepage, unsigned int *pnum_referrals,
struct dfs_info3_param **preferrals, int remap)
{
char *temp_unc;
int rc = 0;
- unsigned char *targetUNCs;
*pnum_referrals = 0;
*preferrals = NULL;
@@ -1454,7 +1453,7 @@
kfree(temp_unc);
}
if (rc == 0)
- rc = CIFSGetDFSRefer(xid, pSesInfo, old_path, &targetUNCs,
+ rc = CIFSGetDFSRefer(xid, pSesInfo, old_path, preferrals,
pnum_referrals, nls_codepage, remap);
/* BB map targetUNCs to dfs_info3 structures, here or
in CIFSGetDFSRefer BB */
@@ -1805,7 +1804,7 @@
if (path == NULL)
return;
- if (delim == '/')
+ if (delim == '/')
old_delim = '\\';
else
old_delim = '/';
@@ -2115,11 +2114,17 @@
cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_OVERR_UID;
if (volume_info.override_gid)
cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_OVERR_GID;
+ if (volume_info.dynperm)
+ cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_DYNPERM;
if (volume_info.direct_io) {
cFYI(1, ("mounting share using direct i/o"));
cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_DIRECT_IO;
}
+ if ((volume_info.cifs_acl) && (volume_info.dynperm))
+ cERROR(1, ("mount option dynperm ignored if cifsacl "
+ "mount option supported"));
+
tcon =
find_unc(sin_server.sin_addr.s_addr, volume_info.UNC,
volume_info.username);
@@ -2131,6 +2136,9 @@
for the retry flag is used */
tcon->retry = volume_info.retry;
tcon->nocase = volume_info.nocase;
+ if (tcon->seal != volume_info.seal)
+ cERROR(1, ("transport encryption setting "
+ "conflicts with existing tid"));
} else {
tcon = tconInfoAlloc();
if (tcon == NULL)
@@ -2144,10 +2152,11 @@
if ((strchr(volume_info.UNC + 3, '\\') == NULL)
&& (strchr(volume_info.UNC + 3, '/') ==
NULL)) {
- rc = connect_to_dfs_path(xid, pSesInfo,
+/* rc = connect_to_dfs_path(xid, pSesInfo,
"", cifs_sb->local_nls,
cifs_sb->mnt_cifs_flags &
- CIFS_MOUNT_MAP_SPECIAL_CHR);
+ CIFS_MOUNT_MAP_SPECIAL_CHR);*/
+ cFYI(1, ("DFS root not supported"));
rc = -ENODEV;
goto out;
} else {
@@ -2163,6 +2172,7 @@
atomic_inc(&pSesInfo->inUse);
tcon->retry = volume_info.retry;
tcon->nocase = volume_info.nocase;
+ tcon->seal = volume_info.seal;
}
}
}
@@ -2186,15 +2196,12 @@
srvTcp->tcpStatus = CifsExiting;
spin_unlock(&GlobalMid_Lock);
if (srvTcp->tsk) {
- struct task_struct *tsk;
/* If we could verify that kthread_stop would
always wake up processes blocked in
tcp in recv_mesg then we could remove the
send_sig call */
force_sig(SIGKILL, srvTcp->tsk);
- tsk = srvTcp->tsk;
- if (tsk)
- kthread_stop(tsk);
+ kthread_stop(srvTcp->tsk);
}
}
/* If find_unc succeeded then rc == 0 so we can not end */
@@ -2210,23 +2217,17 @@
if ((temp_rc == -ESHUTDOWN) &&
(pSesInfo->server) &&
(pSesInfo->server->tsk)) {
- struct task_struct *tsk;
force_sig(SIGKILL,
pSesInfo->server->tsk);
- tsk = pSesInfo->server->tsk;
- if (tsk)
- kthread_stop(tsk);
+ kthread_stop(pSesInfo->server->tsk);
}
} else {
cFYI(1, ("No session or bad tcon"));
if ((pSesInfo->server) &&
(pSesInfo->server->tsk)) {
- struct task_struct *tsk;
force_sig(SIGKILL,
pSesInfo->server->tsk);
- tsk = pSesInfo->server->tsk;
- if (tsk)
- kthread_stop(tsk);
+ kthread_stop(pSesInfo->server->tsk);
}
}
sesInfoFree(pSesInfo);
@@ -2313,9 +2314,10 @@
user = ses->userName;
domain = ses->domainName;
smb_buffer = cifs_buf_get();
- if (smb_buffer == NULL) {
+
+ if (smb_buffer == NULL)
return -ENOMEM;
- }
+
smb_buffer_response = smb_buffer;
pSMBr = pSMB = (SESSION_SETUP_ANDX *) smb_buffer;
diff --git a/fs/cifs/dir.c b/fs/cifs/dir.c
index 6ed7759..fb69c1f 100644
--- a/fs/cifs/dir.c
+++ b/fs/cifs/dir.c
@@ -49,18 +49,25 @@
struct dentry *temp;
int namelen;
int pplen;
+ int dfsplen;
char *full_path;
char dirsep;
+ struct cifs_sb_info *cifs_sb;
if (direntry == NULL)
return NULL; /* not much we can do if dentry is freed and
we need to reopen the file after it was closed implicitly
when the server crashed */
- dirsep = CIFS_DIR_SEP(CIFS_SB(direntry->d_sb));
- pplen = CIFS_SB(direntry->d_sb)->prepathlen;
+ cifs_sb = CIFS_SB(direntry->d_sb);
+ dirsep = CIFS_DIR_SEP(cifs_sb);
+ pplen = cifs_sb->prepathlen;
+ if (cifs_sb->tcon && (cifs_sb->tcon->Flags & SMB_SHARE_IS_IN_DFS))
+ dfsplen = strnlen(cifs_sb->tcon->treeName, MAX_TREE_SIZE + 1);
+ else
+ dfsplen = 0;
cifs_bp_rename_retry:
- namelen = pplen;
+ namelen = pplen + dfsplen;
for (temp = direntry; !IS_ROOT(temp);) {
namelen += (1 + temp->d_name.len);
temp = temp->d_parent;
@@ -91,7 +98,7 @@
return NULL;
}
}
- if (namelen != pplen) {
+ if (namelen != pplen + dfsplen) {
cERROR(1,
("did not end path lookup where expected namelen is %d",
namelen));
@@ -107,7 +114,18 @@
since the '\' is a valid posix character so we can not switch
those safely to '/' if any are found in the middle of the prepath */
/* BB test paths to Windows with '/' in the midst of prepath */
- strncpy(full_path, CIFS_SB(direntry->d_sb)->prepath, pplen);
+
+ if (dfsplen) {
+ strncpy(full_path, cifs_sb->tcon->treeName, dfsplen);
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_POSIX_PATHS) {
+ int i;
+ for (i = 0; i < dfsplen; i++) {
+ if (full_path[i] == '\\')
+ full_path[i] = '/';
+ }
+ }
+ }
+ strncpy(full_path + dfsplen, CIFS_SB(direntry->d_sb)->prepath, pplen);
return full_path;
}
@@ -119,6 +137,7 @@
{
int rc = -ENOENT;
int xid;
+ int create_options = CREATE_NOT_DIR;
int oplock = 0;
int desiredAccess = GENERIC_READ | GENERIC_WRITE;
__u16 fileHandle;
@@ -176,9 +195,19 @@
FreeXid(xid);
return -ENOMEM;
}
+
+ mode &= ~current->fs->umask;
+
+ /*
+ * if we're not using unix extensions, see if we need to set
+ * ATTR_READONLY on the create call
+ */
+ if (!pTcon->unix_ext && (mode & S_IWUGO) == 0)
+ create_options |= CREATE_OPTION_READONLY;
+
if (cifs_sb->tcon->ses->capabilities & CAP_NT_SMBS)
rc = CIFSSMBOpen(xid, pTcon, full_path, disposition,
- desiredAccess, CREATE_NOT_DIR,
+ desiredAccess, create_options,
&fileHandle, &oplock, buf, cifs_sb->local_nls,
cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR);
else
@@ -187,7 +216,7 @@
if (rc == -EIO) {
/* old server, retry the open legacy style */
rc = SMBLegacyOpen(xid, pTcon, full_path, disposition,
- desiredAccess, CREATE_NOT_DIR,
+ desiredAccess, create_options,
&fileHandle, &oplock, buf, cifs_sb->local_nls,
cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR);
}
@@ -197,7 +226,6 @@
/* If Open reported that we actually created a file
then we now have to set the mode if possible */
if ((pTcon->unix_ext) && (oplock & CIFS_CREATE_ACTION)) {
- mode &= ~current->fs->umask;
if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SET_UID) {
CIFSSMBUnixSetPerms(xid, pTcon, full_path, mode,
(__u64)current->fsuid,
@@ -232,7 +260,9 @@
buf, inode->i_sb, xid,
&fileHandle);
if (newinode) {
- newinode->i_mode = mode;
+ if (cifs_sb->mnt_cifs_flags &
+ CIFS_MOUNT_DYNPERM)
+ newinode->i_mode = mode;
if ((oplock & CIFS_CREATE_ACTION) &&
(cifs_sb->mnt_cifs_flags &
CIFS_MOUNT_SET_UID)) {
@@ -580,7 +610,7 @@
* case take precedence. If a is not a negative dentry, this
* should have no side effects
*/
- memcpy(a->name, b->name, a->len);
+ memcpy((void *)a->name, b->name, a->len);
return 0;
}
return 1;
diff --git a/fs/cifs/dns_resolve.c b/fs/cifs/dns_resolve.c
index 939e256..f730ef3 100644
--- a/fs/cifs/dns_resolve.c
+++ b/fs/cifs/dns_resolve.c
@@ -134,10 +134,6 @@
rkey = request_key(&key_type_dns_resolver, name, "");
if (!IS_ERR(rkey)) {
data = rkey->payload.data;
- cFYI(1, ("%s: resolved: %s to %s", __func__,
- rkey->description,
- *ip_addr
- ));
} else {
cERROR(1, ("%s: unable to resolve: %s", __func__, name));
goto out;
@@ -150,6 +146,11 @@
if (*ip_addr) {
memcpy(*ip_addr, data, len);
(*ip_addr)[len] = '\0';
+ if (!IS_ERR(rkey))
+ cFYI(1, ("%s: resolved: %s to %s", __func__,
+ name,
+ *ip_addr
+ ));
rc = 0;
} else {
rc = -ENOMEM;
diff --git a/fs/cifs/file.c b/fs/cifs/file.c
index 31a0a33..0aac824 100644
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -75,7 +75,11 @@
return (GENERIC_READ | GENERIC_WRITE);
}
- return 0x20197;
+ return (READ_CONTROL | FILE_WRITE_ATTRIBUTES | FILE_READ_ATTRIBUTES |
+ FILE_WRITE_EA | FILE_APPEND_DATA | FILE_WRITE_DATA |
+ FILE_READ_DATA);
+
+
}
static inline int cifs_get_disposition(unsigned int flags)
@@ -542,7 +546,6 @@
msleep(timeout);
timeout *= 8;
}
- kfree(pSMBFile->search_resume_name);
kfree(file->private_data);
file->private_data = NULL;
} else
@@ -601,12 +604,6 @@
else
cifs_buf_release(ptmp);
}
- ptmp = pCFileStruct->search_resume_name;
- if (ptmp) {
- cFYI(1, ("closedir free resume name"));
- pCFileStruct->search_resume_name = NULL;
- kfree(ptmp);
- }
kfree(file->private_data);
file->private_data = NULL;
}
diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c
index 0d9d2e6d..722be54 100644
--- a/fs/cifs/inode.c
+++ b/fs/cifs/inode.c
@@ -161,118 +161,115 @@
spin_unlock(&inode->i_lock);
}
-static const unsigned char *cifs_get_search_path(struct cifs_sb_info *cifs_sb,
- const char *search_path)
+
+/*
+ * Needed to setup inode data for the directory which is the
+ * junction to the new submount (ie to setup the fake directory
+ * which represents a DFS referral)
+ */
+static void fill_fake_finddataunix(FILE_UNIX_BASIC_INFO *pfnd_dat,
+ struct super_block *sb)
{
- int tree_len;
- int path_len;
- int i;
- char *tmp_path;
- struct cifsTconInfo *pTcon = cifs_sb->tcon;
+ struct inode *pinode = NULL;
- if (!(pTcon->Flags & SMB_SHARE_IS_IN_DFS))
- return search_path;
+ memset(pfnd_dat, 0, sizeof(FILE_UNIX_BASIC_INFO));
- /* use full path name for working with DFS */
- tree_len = strnlen(pTcon->treeName, MAX_TREE_SIZE + 1);
- path_len = strnlen(search_path, MAX_PATHCONF);
+/* __le64 pfnd_dat->EndOfFile = cpu_to_le64(0);
+ __le64 pfnd_dat->NumOfBytes = cpu_to_le64(0);
+ __u64 UniqueId = 0; */
+ pfnd_dat->LastStatusChange =
+ cpu_to_le64(cifs_UnixTimeToNT(CURRENT_TIME));
+ pfnd_dat->LastAccessTime =
+ cpu_to_le64(cifs_UnixTimeToNT(CURRENT_TIME));
+ pfnd_dat->LastModificationTime =
+ cpu_to_le64(cifs_UnixTimeToNT(CURRENT_TIME));
+ pfnd_dat->Type = cpu_to_le32(UNIX_DIR);
+ pfnd_dat->Permissions = cpu_to_le64(S_IXUGO | S_IRWXU);
+ pfnd_dat->Nlinks = cpu_to_le64(2);
+ if (sb->s_root)
+ pinode = sb->s_root->d_inode;
+ if (pinode == NULL)
+ return;
- tmp_path = kmalloc(tree_len+path_len+1, GFP_KERNEL);
- if (tmp_path == NULL)
- return search_path;
-
- strncpy(tmp_path, pTcon->treeName, tree_len);
- if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_POSIX_PATHS)
- for (i = 0; i < tree_len; i++) {
- if (tmp_path[i] == '\\')
- tmp_path[i] = '/';
- }
- strncpy(tmp_path+tree_len, search_path, path_len);
- tmp_path[tree_len+path_len] = 0;
- return tmp_path;
+ /* fill in default values for the remaining based on root
+ inode since we can not query the server for this inode info */
+ pfnd_dat->DevMajor = cpu_to_le64(MAJOR(pinode->i_rdev));
+ pfnd_dat->DevMinor = cpu_to_le64(MINOR(pinode->i_rdev));
+ pfnd_dat->Uid = cpu_to_le64(pinode->i_uid);
+ pfnd_dat->Gid = cpu_to_le64(pinode->i_gid);
}
int cifs_get_inode_info_unix(struct inode **pinode,
- const unsigned char *search_path, struct super_block *sb, int xid)
+ const unsigned char *full_path, struct super_block *sb, int xid)
{
int rc = 0;
- FILE_UNIX_BASIC_INFO findData;
+ FILE_UNIX_BASIC_INFO find_data;
struct cifsTconInfo *pTcon;
struct inode *inode;
struct cifs_sb_info *cifs_sb = CIFS_SB(sb);
- const unsigned char *full_path;
bool is_dfs_referral = false;
+ struct cifsInodeInfo *cifsInfo;
+ __u64 num_of_bytes;
+ __u64 end_of_file;
pTcon = cifs_sb->tcon;
- cFYI(1, ("Getting info on %s", search_path));
+ cFYI(1, ("Getting info on %s", full_path));
- full_path = cifs_get_search_path(cifs_sb, search_path);
-
-try_again_CIFSSMBUnixQPathInfo:
/* could have done a find first instead but this returns more info */
- rc = CIFSSMBUnixQPathInfo(xid, pTcon, full_path, &findData,
+ rc = CIFSSMBUnixQPathInfo(xid, pTcon, full_path, &find_data,
cifs_sb->local_nls, cifs_sb->mnt_cifs_flags &
CIFS_MOUNT_MAP_SPECIAL_CHR);
-/* dump_mem("\nUnixQPathInfo return data", &findData,
- sizeof(findData)); */
if (rc) {
if (rc == -EREMOTE && !is_dfs_referral) {
is_dfs_referral = true;
- if (full_path != search_path) {
- kfree(full_path);
- full_path = search_path;
- }
- goto try_again_CIFSSMBUnixQPathInfo;
+ cFYI(DBG2, ("DFS ref"));
+ /* for DFS, server does not give us real inode data */
+ fill_fake_finddataunix(&find_data, sb);
+ rc = 0;
}
- goto cgiiu_exit;
- } else {
- struct cifsInodeInfo *cifsInfo;
- __u64 num_of_bytes = le64_to_cpu(findData.NumOfBytes);
- __u64 end_of_file = le64_to_cpu(findData.EndOfFile);
-
- /* get new inode */
- if (*pinode == NULL) {
- *pinode = new_inode(sb);
- if (*pinode == NULL) {
- rc = -ENOMEM;
- goto cgiiu_exit;
- }
- /* Is an i_ino of zero legal? */
- /* Are there sanity checks we can use to ensure that
- the server is really filling in that field? */
- if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM) {
- (*pinode)->i_ino =
- (unsigned long)findData.UniqueId;
- } /* note ino incremented to unique num in new_inode */
- if (sb->s_flags & MS_NOATIME)
- (*pinode)->i_flags |= S_NOATIME | S_NOCMTIME;
-
- insert_inode_hash(*pinode);
- }
-
- inode = *pinode;
- cifsInfo = CIFS_I(inode);
-
- cFYI(1, ("Old time %ld", cifsInfo->time));
- cifsInfo->time = jiffies;
- cFYI(1, ("New time %ld", cifsInfo->time));
- /* this is ok to set on every inode revalidate */
- atomic_set(&cifsInfo->inUse, 1);
-
- cifs_unix_info_to_inode(inode, &findData, 0);
-
-
- if (num_of_bytes < end_of_file)
- cFYI(1, ("allocation size less than end of file"));
- cFYI(1, ("Size %ld and blocks %llu",
- (unsigned long) inode->i_size,
- (unsigned long long)inode->i_blocks));
-
- cifs_set_ops(inode, is_dfs_referral);
}
+ num_of_bytes = le64_to_cpu(find_data.NumOfBytes);
+ end_of_file = le64_to_cpu(find_data.EndOfFile);
+
+ /* get new inode */
+ if (*pinode == NULL) {
+ *pinode = new_inode(sb);
+ if (*pinode == NULL) {
+ rc = -ENOMEM;
+ goto cgiiu_exit;
+ }
+ /* Is an i_ino of zero legal? */
+ /* note ino incremented to unique num in new_inode */
+ /* Are there sanity checks we can use to ensure that
+ the server is really filling in that field? */
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM)
+ (*pinode)->i_ino = (unsigned long)find_data.UniqueId;
+
+ if (sb->s_flags & MS_NOATIME)
+ (*pinode)->i_flags |= S_NOATIME | S_NOCMTIME;
+
+ insert_inode_hash(*pinode);
+ }
+
+ inode = *pinode;
+ cifsInfo = CIFS_I(inode);
+
+ cFYI(1, ("Old time %ld", cifsInfo->time));
+ cifsInfo->time = jiffies;
+ cFYI(1, ("New time %ld", cifsInfo->time));
+ /* this is ok to set on every inode revalidate */
+ atomic_set(&cifsInfo->inUse, 1);
+
+ cifs_unix_info_to_inode(inode, &find_data, 0);
+
+ if (num_of_bytes < end_of_file)
+ cFYI(1, ("allocation size less than end of file"));
+ cFYI(1, ("Size %ld and blocks %llu",
+ (unsigned long) inode->i_size,
+ (unsigned long long)inode->i_blocks));
+
+ cifs_set_ops(inode, is_dfs_referral);
cgiiu_exit:
- if (full_path != search_path)
- kfree(full_path);
return rc;
}
@@ -379,21 +376,52 @@
#endif
}
+/*
+ * Needed to setup inode data for the directory which is the
+ * junction to the new submount (ie to setup the fake directory
+ * which represents a DFS referral)
+ */
+static void fill_fake_finddata(FILE_ALL_INFO *pfnd_dat,
+ struct super_block *sb)
+{
+ memset(pfnd_dat, 0, sizeof(FILE_ALL_INFO));
+
+/* __le64 pfnd_dat->AllocationSize = cpu_to_le64(0);
+ __le64 pfnd_dat->EndOfFile = cpu_to_le64(0);
+ __u8 pfnd_dat->DeletePending = 0;
+ __u8 pfnd_data->Directory = 0;
+ __le32 pfnd_dat->EASize = 0;
+ __u64 pfnd_dat->IndexNumber = 0;
+ __u64 pfnd_dat->IndexNumber1 = 0; */
+ pfnd_dat->CreationTime =
+ cpu_to_le64(cifs_UnixTimeToNT(CURRENT_TIME));
+ pfnd_dat->LastAccessTime =
+ cpu_to_le64(cifs_UnixTimeToNT(CURRENT_TIME));
+ pfnd_dat->LastWriteTime =
+ cpu_to_le64(cifs_UnixTimeToNT(CURRENT_TIME));
+ pfnd_dat->ChangeTime =
+ cpu_to_le64(cifs_UnixTimeToNT(CURRENT_TIME));
+ pfnd_dat->Attributes = cpu_to_le32(ATTR_DIRECTORY);
+ pfnd_dat->NumberOfLinks = cpu_to_le32(2);
+}
+
int cifs_get_inode_info(struct inode **pinode,
- const unsigned char *search_path, FILE_ALL_INFO *pfindData,
+ const unsigned char *full_path, FILE_ALL_INFO *pfindData,
struct super_block *sb, int xid, const __u16 *pfid)
{
int rc = 0;
+ __u32 attr;
+ struct cifsInodeInfo *cifsInfo;
struct cifsTconInfo *pTcon;
struct inode *inode;
struct cifs_sb_info *cifs_sb = CIFS_SB(sb);
- const unsigned char *full_path = NULL;
char *buf = NULL;
bool adjustTZ = false;
bool is_dfs_referral = false;
+ umode_t default_mode;
pTcon = cifs_sb->tcon;
- cFYI(1, ("Getting info on %s", search_path));
+ cFYI(1, ("Getting info on %s", full_path));
if ((pfindData == NULL) && (*pinode != NULL)) {
if (CIFS_I(*pinode)->clientCanCacheRead) {
@@ -409,9 +437,6 @@
return -ENOMEM;
pfindData = (FILE_ALL_INFO *)buf;
- full_path = cifs_get_search_path(cifs_sb, search_path);
-
-try_again_CIFSSMBQPathInfo:
/* could do find first instead but this returns more info */
rc = CIFSSMBQPathInfo(xid, pTcon, full_path, pfindData,
0 /* not legacy */,
@@ -429,178 +454,163 @@
}
}
/* dump_mem("\nQPathInfo return data",&findData, sizeof(findData)); */
- if (rc) {
- if (rc == -EREMOTE && !is_dfs_referral) {
- is_dfs_referral = true;
- if (full_path != search_path) {
- kfree(full_path);
- full_path = search_path;
- }
- goto try_again_CIFSSMBQPathInfo;
- }
+ if (rc == -EREMOTE) {
+ is_dfs_referral = true;
+ fill_fake_finddata(pfindData, sb);
+ rc = 0;
+ } else if (rc)
goto cgii_exit;
- } else {
- struct cifsInodeInfo *cifsInfo;
- __u32 attr = le32_to_cpu(pfindData->Attributes);
- /* get new inode */
+ attr = le32_to_cpu(pfindData->Attributes);
+
+ /* get new inode */
+ if (*pinode == NULL) {
+ *pinode = new_inode(sb);
if (*pinode == NULL) {
- *pinode = new_inode(sb);
- if (*pinode == NULL) {
- rc = -ENOMEM;
- goto cgii_exit;
- }
- /* Is an i_ino of zero legal? Can we use that to check
- if the server supports returning inode numbers? Are
- there other sanity checks we can use to ensure that
- the server is really filling in that field? */
+ rc = -ENOMEM;
+ goto cgii_exit;
+ }
+ /* Is an i_ino of zero legal? Can we use that to check
+ if the server supports returning inode numbers? Are
+ there other sanity checks we can use to ensure that
+ the server is really filling in that field? */
- /* We can not use the IndexNumber field by default from
- Windows or Samba (in ALL_INFO buf) but we can request
- it explicitly. It may not be unique presumably if
- the server has multiple devices mounted under one
- share */
+ /* We can not use the IndexNumber field by default from
+ Windows or Samba (in ALL_INFO buf) but we can request
+ it explicitly. It may not be unique presumably if
+ the server has multiple devices mounted under one share */
- /* There may be higher info levels that work but are
- there Windows server or network appliances for which
- IndexNumber field is not guaranteed unique? */
+ /* There may be higher info levels that work but are
+ there Windows server or network appliances for which
+ IndexNumber field is not guaranteed unique? */
- if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM) {
- int rc1 = 0;
- __u64 inode_num;
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM) {
+ int rc1 = 0;
+ __u64 inode_num;
- rc1 = CIFSGetSrvInodeNumber(xid, pTcon,
- search_path, &inode_num,
+ rc1 = CIFSGetSrvInodeNumber(xid, pTcon,
+ full_path, &inode_num,
cifs_sb->local_nls,
cifs_sb->mnt_cifs_flags &
CIFS_MOUNT_MAP_SPECIAL_CHR);
- if (rc1) {
- cFYI(1, ("GetSrvInodeNum rc %d", rc1));
- /* BB EOPNOSUPP disable SERVER_INUM? */
- } else /* do we need cast or hash to ino? */
- (*pinode)->i_ino = inode_num;
- } /* else ino incremented to unique num in new_inode*/
- if (sb->s_flags & MS_NOATIME)
- (*pinode)->i_flags |= S_NOATIME | S_NOCMTIME;
- insert_inode_hash(*pinode);
- }
- inode = *pinode;
- cifsInfo = CIFS_I(inode);
- cifsInfo->cifsAttrs = attr;
- cFYI(1, ("Old time %ld", cifsInfo->time));
- cifsInfo->time = jiffies;
- cFYI(1, ("New time %ld", cifsInfo->time));
-
- /* blksize needs to be multiple of two. So safer to default to
- blksize and blkbits set in superblock so 2**blkbits and blksize
- will match rather than setting to:
- (pTcon->ses->server->maxBuf - MAX_CIFS_HDR_SIZE) & 0xFFFFFE00;*/
-
- /* Linux can not store file creation time so ignore it */
- if (pfindData->LastAccessTime)
- inode->i_atime = cifs_NTtimeToUnix
- (le64_to_cpu(pfindData->LastAccessTime));
- else /* do not need to use current_fs_time - time not stored */
- inode->i_atime = CURRENT_TIME;
- inode->i_mtime =
- cifs_NTtimeToUnix(le64_to_cpu(pfindData->LastWriteTime));
- inode->i_ctime =
- cifs_NTtimeToUnix(le64_to_cpu(pfindData->ChangeTime));
- cFYI(0, ("Attributes came in as 0x%x", attr));
- if (adjustTZ && (pTcon->ses) && (pTcon->ses->server)) {
- inode->i_ctime.tv_sec += pTcon->ses->server->timeAdj;
- inode->i_mtime.tv_sec += pTcon->ses->server->timeAdj;
- }
-
- /* set default mode. will override for dirs below */
- if (atomic_read(&cifsInfo->inUse) == 0)
- /* new inode, can safely set these fields */
- inode->i_mode = cifs_sb->mnt_file_mode;
- else /* since we set the inode type below we need to mask off
- to avoid strange results if type changes and both
- get orred in */
- inode->i_mode &= ~S_IFMT;
-/* if (attr & ATTR_REPARSE) */
- /* We no longer handle these as symlinks because we could not
- follow them due to the absolute path with drive letter */
- if (attr & ATTR_DIRECTORY) {
- /* override default perms since we do not do byte range locking
- on dirs */
- inode->i_mode = cifs_sb->mnt_dir_mode;
- inode->i_mode |= S_IFDIR;
- } else if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL) &&
- (cifsInfo->cifsAttrs & ATTR_SYSTEM) &&
- /* No need to le64 convert size of zero */
- (pfindData->EndOfFile == 0)) {
- inode->i_mode = cifs_sb->mnt_file_mode;
- inode->i_mode |= S_IFIFO;
-/* BB Finish for SFU style symlinks and devices */
- } else if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL) &&
- (cifsInfo->cifsAttrs & ATTR_SYSTEM)) {
- if (decode_sfu_inode(inode,
- le64_to_cpu(pfindData->EndOfFile),
- search_path,
- cifs_sb, xid))
- cFYI(1, ("Unrecognized sfu inode type"));
-
- cFYI(1, ("sfu mode 0%o", inode->i_mode));
- } else {
- inode->i_mode |= S_IFREG;
- /* treat the dos attribute of read-only as read-only
- mode e.g. 555 */
- if (cifsInfo->cifsAttrs & ATTR_READONLY)
- inode->i_mode &= ~(S_IWUGO);
- else if ((inode->i_mode & S_IWUGO) == 0)
- /* the ATTR_READONLY flag may have been */
- /* changed on server -- set any w bits */
- /* allowed by mnt_file_mode */
- inode->i_mode |= (S_IWUGO &
- cifs_sb->mnt_file_mode);
- /* BB add code here -
- validate if device or weird share or device type? */
- }
-
- spin_lock(&inode->i_lock);
- if (is_size_safe_to_change(cifsInfo,
- le64_to_cpu(pfindData->EndOfFile))) {
- /* can not safely shrink the file size here if the
- client is writing to it due to potential races */
- i_size_write(inode, le64_to_cpu(pfindData->EndOfFile));
-
- /* 512 bytes (2**9) is the fake blocksize that must be
- used for this calculation */
- inode->i_blocks = (512 - 1 + le64_to_cpu(
- pfindData->AllocationSize)) >> 9;
- }
- spin_unlock(&inode->i_lock);
-
- inode->i_nlink = le32_to_cpu(pfindData->NumberOfLinks);
-
- /* BB fill in uid and gid here? with help from winbind?
- or retrieve from NTFS stream extended attribute */
-#ifdef CONFIG_CIFS_EXPERIMENTAL
- /* fill in 0777 bits from ACL */
- if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_ACL) {
- cFYI(1, ("Getting mode bits from ACL"));
- acl_to_uid_mode(inode, search_path, pfid);
- }
-#endif
- if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL) {
- /* fill in remaining high mode bits e.g. SUID, VTX */
- get_sfu_mode(inode, search_path, cifs_sb, xid);
- } else if (atomic_read(&cifsInfo->inUse) == 0) {
- inode->i_uid = cifs_sb->mnt_uid;
- inode->i_gid = cifs_sb->mnt_gid;
- /* set so we do not keep refreshing these fields with
- bad data after user has changed them in memory */
- atomic_set(&cifsInfo->inUse, 1);
- }
-
- cifs_set_ops(inode, is_dfs_referral);
+ if (rc1) {
+ cFYI(1, ("GetSrvInodeNum rc %d", rc1));
+ /* BB EOPNOSUPP disable SERVER_INUM? */
+ } else /* do we need cast or hash to ino? */
+ (*pinode)->i_ino = inode_num;
+ } /* else ino incremented to unique num in new_inode*/
+ if (sb->s_flags & MS_NOATIME)
+ (*pinode)->i_flags |= S_NOATIME | S_NOCMTIME;
+ insert_inode_hash(*pinode);
}
+ inode = *pinode;
+ cifsInfo = CIFS_I(inode);
+ cifsInfo->cifsAttrs = attr;
+ cFYI(1, ("Old time %ld", cifsInfo->time));
+ cifsInfo->time = jiffies;
+ cFYI(1, ("New time %ld", cifsInfo->time));
+
+ /* blksize needs to be multiple of two. So safer to default to
+ blksize and blkbits set in superblock so 2**blkbits and blksize
+ will match rather than setting to:
+ (pTcon->ses->server->maxBuf - MAX_CIFS_HDR_SIZE) & 0xFFFFFE00;*/
+
+ /* Linux can not store file creation time so ignore it */
+ if (pfindData->LastAccessTime)
+ inode->i_atime = cifs_NTtimeToUnix
+ (le64_to_cpu(pfindData->LastAccessTime));
+ else /* do not need to use current_fs_time - time not stored */
+ inode->i_atime = CURRENT_TIME;
+ inode->i_mtime =
+ cifs_NTtimeToUnix(le64_to_cpu(pfindData->LastWriteTime));
+ inode->i_ctime =
+ cifs_NTtimeToUnix(le64_to_cpu(pfindData->ChangeTime));
+ cFYI(DBG2, ("Attributes came in as 0x%x", attr));
+ if (adjustTZ && (pTcon->ses) && (pTcon->ses->server)) {
+ inode->i_ctime.tv_sec += pTcon->ses->server->timeAdj;
+ inode->i_mtime.tv_sec += pTcon->ses->server->timeAdj;
+ }
+
+ /* get default inode mode */
+ if (attr & ATTR_DIRECTORY)
+ default_mode = cifs_sb->mnt_dir_mode;
+ else
+ default_mode = cifs_sb->mnt_file_mode;
+
+ /* set permission bits */
+ if (atomic_read(&cifsInfo->inUse) == 0 ||
+ (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DYNPERM) == 0)
+ inode->i_mode = default_mode;
+ else {
+ /* just reenable write bits if !ATTR_READONLY */
+ if ((inode->i_mode & S_IWUGO) == 0 &&
+ (attr & ATTR_READONLY) == 0)
+ inode->i_mode |= (S_IWUGO & default_mode);
+ inode->i_mode &= ~S_IFMT;
+ }
+ /* clear write bits if ATTR_READONLY is set */
+ if (attr & ATTR_READONLY)
+ inode->i_mode &= ~S_IWUGO;
+
+ /* set inode type */
+ if ((attr & ATTR_SYSTEM) &&
+ (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL)) {
+ /* no need to fix endianness on 0 */
+ if (pfindData->EndOfFile == 0)
+ inode->i_mode |= S_IFIFO;
+ else if (decode_sfu_inode(inode,
+ le64_to_cpu(pfindData->EndOfFile),
+ full_path, cifs_sb, xid))
+ cFYI(1, ("unknown SFU file type\n"));
+ } else {
+ if (attr & ATTR_DIRECTORY)
+ inode->i_mode |= S_IFDIR;
+ else
+ inode->i_mode |= S_IFREG;
+ }
+
+ spin_lock(&inode->i_lock);
+ if (is_size_safe_to_change(cifsInfo,
+ le64_to_cpu(pfindData->EndOfFile))) {
+ /* can not safely shrink the file size here if the
+ client is writing to it due to potential races */
+ i_size_write(inode, le64_to_cpu(pfindData->EndOfFile));
+
+ /* 512 bytes (2**9) is the fake blocksize that must be
+ used for this calculation */
+ inode->i_blocks = (512 - 1 + le64_to_cpu(
+ pfindData->AllocationSize)) >> 9;
+ }
+ spin_unlock(&inode->i_lock);
+
+ inode->i_nlink = le32_to_cpu(pfindData->NumberOfLinks);
+
+ /* BB fill in uid and gid here? with help from winbind?
+ or retrieve from NTFS stream extended attribute */
+#ifdef CONFIG_CIFS_EXPERIMENTAL
+ /* fill in 0777 bits from ACL */
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_ACL) {
+ cFYI(1, ("Getting mode bits from ACL"));
+ acl_to_uid_mode(inode, full_path, pfid);
+ }
+#endif
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL) {
+ /* fill in remaining high mode bits e.g. SUID, VTX */
+ get_sfu_mode(inode, full_path, cifs_sb, xid);
+ } else if (atomic_read(&cifsInfo->inUse) == 0) {
+ inode->i_uid = cifs_sb->mnt_uid;
+ inode->i_gid = cifs_sb->mnt_gid;
+ /* set so we do not keep refreshing these fields with
+ bad data after user has changed them in memory */
+ atomic_set(&cifsInfo->inUse, 1);
+ }
+
+ cifs_set_ops(inode, is_dfs_referral);
+
+
+
+
cgii_exit:
- if (full_path != search_path)
- kfree(full_path);
kfree(buf);
return rc;
}
@@ -974,8 +984,8 @@
* failed to get it from the server or was set bogus */
if ((direntry->d_inode) && (direntry->d_inode->i_nlink < 2))
direntry->d_inode->i_nlink = 2;
+ mode &= ~current->fs->umask;
if (pTcon->unix_ext) {
- mode &= ~current->fs->umask;
if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SET_UID) {
CIFSSMBUnixSetPerms(xid, pTcon, full_path,
mode,
@@ -994,12 +1004,22 @@
CIFS_MOUNT_MAP_SPECIAL_CHR);
}
} else {
- /* BB to be implemented via Windows secrty descriptors
- eg CIFSSMBWinSetPerms(xid, pTcon, full_path, mode,
- -1, -1, local_nls); */
+ if (!(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_ACL) &&
+ (mode & S_IWUGO) == 0) {
+ FILE_BASIC_INFO pInfo;
+ memset(&pInfo, 0, sizeof(pInfo));
+ pInfo.Attributes = cpu_to_le32(ATTR_READONLY);
+ CIFSSMBSetTimes(xid, pTcon, full_path,
+ &pInfo, cifs_sb->local_nls,
+ cifs_sb->mnt_cifs_flags &
+ CIFS_MOUNT_MAP_SPECIAL_CHR);
+ }
if (direntry->d_inode) {
- direntry->d_inode->i_mode = mode;
- direntry->d_inode->i_mode |= S_IFDIR;
+ if (cifs_sb->mnt_cifs_flags &
+ CIFS_MOUNT_DYNPERM)
+ direntry->d_inode->i_mode =
+ (mode | S_IFDIR);
+
if (cifs_sb->mnt_cifs_flags &
CIFS_MOUNT_SET_UID) {
direntry->d_inode->i_uid =
@@ -1408,18 +1428,19 @@
__u64 uid = 0xFFFFFFFFFFFFFFFFULL;
__u64 gid = 0xFFFFFFFFFFFFFFFFULL;
struct cifsInodeInfo *cifsInode;
+ struct inode *inode = direntry->d_inode;
xid = GetXid();
cFYI(1, ("setattr on file %s attrs->iavalid 0x%x",
direntry->d_name.name, attrs->ia_valid));
- cifs_sb = CIFS_SB(direntry->d_inode->i_sb);
+ cifs_sb = CIFS_SB(inode->i_sb);
pTcon = cifs_sb->tcon;
if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_NO_PERM) == 0) {
/* check if we have permission to change attrs */
- rc = inode_change_ok(direntry->d_inode, attrs);
+ rc = inode_change_ok(inode, attrs);
if (rc < 0) {
FreeXid(xid);
return rc;
@@ -1432,7 +1453,7 @@
FreeXid(xid);
return -ENOMEM;
}
- cifsInode = CIFS_I(direntry->d_inode);
+ cifsInode = CIFS_I(inode);
if ((attrs->ia_valid & ATTR_MTIME) || (attrs->ia_valid & ATTR_SIZE)) {
/*
@@ -1443,9 +1464,9 @@
will be truncated anyway? Also, should we error out here if
the flush returns error?
*/
- rc = filemap_write_and_wait(direntry->d_inode->i_mapping);
+ rc = filemap_write_and_wait(inode->i_mapping);
if (rc != 0) {
- CIFS_I(direntry->d_inode)->write_behind_rc = rc;
+ cifsInode->write_behind_rc = rc;
rc = 0;
}
}
@@ -1494,8 +1515,7 @@
int oplock = 0;
rc = SMBLegacyOpen(xid, pTcon, full_path,
- FILE_OPEN,
- SYNCHRONIZE | FILE_WRITE_ATTRIBUTES,
+ FILE_OPEN, GENERIC_WRITE,
CREATE_NOT_DIR, &netfid, &oplock,
NULL, cifs_sb->local_nls,
cifs_sb->mnt_cifs_flags &
@@ -1521,19 +1541,31 @@
*/
if (rc == 0) {
- rc = cifs_vmtruncate(direntry->d_inode, attrs->ia_size);
- cifs_truncate_page(direntry->d_inode->i_mapping,
- direntry->d_inode->i_size);
+ rc = cifs_vmtruncate(inode, attrs->ia_size);
+ cifs_truncate_page(inode->i_mapping, inode->i_size);
} else
goto cifs_setattr_exit;
}
- if (attrs->ia_valid & ATTR_UID) {
- cFYI(1, ("UID changed to %d", attrs->ia_uid));
- uid = attrs->ia_uid;
- }
- if (attrs->ia_valid & ATTR_GID) {
- cFYI(1, ("GID changed to %d", attrs->ia_gid));
- gid = attrs->ia_gid;
+
+ /*
+ * Without unix extensions we can't send ownership changes to the
+ * server, so silently ignore them. This is consistent with how
+ * local DOS/Windows filesystems behave (VFAT, NTFS, etc). With
+ * CIFSACL support + proper Windows to Unix idmapping, we may be
+ * able to support this in the future.
+ */
+ if (!pTcon->unix_ext &&
+ !(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SET_UID)) {
+ attrs->ia_valid &= ~(ATTR_UID | ATTR_GID);
+ } else {
+ if (attrs->ia_valid & ATTR_UID) {
+ cFYI(1, ("UID changed to %d", attrs->ia_uid));
+ uid = attrs->ia_uid;
+ }
+ if (attrs->ia_valid & ATTR_GID) {
+ cFYI(1, ("GID changed to %d", attrs->ia_gid));
+ gid = attrs->ia_gid;
+ }
}
time_buf.Attributes = 0;
@@ -1543,7 +1575,7 @@
attrs->ia_valid &= ~ATTR_MODE;
if (attrs->ia_valid & ATTR_MODE) {
- cFYI(1, ("Mode changed to 0x%x", attrs->ia_mode));
+ cFYI(1, ("Mode changed to 0%o", attrs->ia_mode));
mode = attrs->ia_mode;
}
@@ -1557,19 +1589,19 @@
rc = 0;
#ifdef CONFIG_CIFS_EXPERIMENTAL
if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_ACL)
- rc = mode_to_acl(direntry->d_inode, full_path, mode);
- else if ((mode & S_IWUGO) == 0) {
-#else
- if ((mode & S_IWUGO) == 0) {
+ rc = mode_to_acl(inode, full_path, mode);
+ else
#endif
- /* not writeable */
- if ((cifsInode->cifsAttrs & ATTR_READONLY) == 0) {
- set_dosattr = true;
- time_buf.Attributes =
- cpu_to_le32(cifsInode->cifsAttrs |
- ATTR_READONLY);
- }
- } else if (cifsInode->cifsAttrs & ATTR_READONLY) {
+ if (((mode & S_IWUGO) == 0) &&
+ (cifsInode->cifsAttrs & ATTR_READONLY) == 0) {
+ set_dosattr = true;
+ time_buf.Attributes = cpu_to_le32(cifsInode->cifsAttrs |
+ ATTR_READONLY);
+ /* fix up mode if we're not using dynperm */
+ if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DYNPERM) == 0)
+ attrs->ia_mode = inode->i_mode & ~S_IWUGO;
+ } else if ((mode & S_IWUGO) &&
+ (cifsInode->cifsAttrs & ATTR_READONLY)) {
/* If file is readonly on server, we would
not be able to write to it - so if any write
bit is enabled for user or group or other we
@@ -1580,6 +1612,20 @@
/* Windows ignores set to zero */
if (time_buf.Attributes == 0)
time_buf.Attributes |= cpu_to_le32(ATTR_NORMAL);
+
+ /* reset local inode permissions to normal */
+ if (!(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DYNPERM)) {
+ attrs->ia_mode &= ~(S_IALLUGO);
+ if (S_ISDIR(inode->i_mode))
+ attrs->ia_mode |=
+ cifs_sb->mnt_dir_mode;
+ else
+ attrs->ia_mode |=
+ cifs_sb->mnt_file_mode;
+ }
+ } else if (!(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DYNPERM)) {
+ /* ignore mode change - ATTR_READONLY hasn't changed */
+ attrs->ia_valid &= ~ATTR_MODE;
}
}
@@ -1665,7 +1711,7 @@
/* do not need local check to inode_check_ok since the server does
that */
if (!rc)
- rc = inode_setattr(direntry->d_inode, attrs);
+ rc = inode_setattr(inode, attrs);
cifs_setattr_exit:
kfree(full_path);
FreeXid(xid);
diff --git a/fs/cifs/ioctl.c b/fs/cifs/ioctl.c
index 5c792df..0088a5b 100644
--- a/fs/cifs/ioctl.c
+++ b/fs/cifs/ioctl.c
@@ -30,9 +30,9 @@
#define CIFS_IOC_CHECKUMOUNT _IO(0xCF, 2)
-int cifs_ioctl(struct inode *inode, struct file *filep,
- unsigned int command, unsigned long arg)
+long cifs_ioctl(struct file *filep, unsigned int command, unsigned long arg)
{
+ struct inode *inode = filep->f_dentry->d_inode;
int rc = -ENOTTY; /* strange error - but the precedent */
int xid;
struct cifs_sb_info *cifs_sb;
diff --git a/fs/cifs/link.c b/fs/cifs/link.c
index 1c2c3ce..63f6440 100644
--- a/fs/cifs/link.c
+++ b/fs/cifs/link.c
@@ -234,7 +234,6 @@
struct cifs_sb_info *cifs_sb;
struct cifsTconInfo *pTcon;
char *full_path = NULL;
- char *tmp_path = NULL;
char *tmpbuffer;
int len;
__u16 fid;
@@ -295,45 +294,9 @@
cFYI(1, ("Error closing junction point "
"(open for ioctl)"));
}
- /* BB unwind this long, nested function, or remove BB */
- if (rc == -EIO) {
- /* Query if DFS Junction */
- unsigned int num_referrals = 0;
- struct dfs_info3_param *refs = NULL;
- tmp_path =
- kmalloc(MAX_TREE_SIZE + MAX_PATHCONF + 1,
- GFP_KERNEL);
- if (tmp_path) {
- strncpy(tmp_path, pTcon->treeName,
- MAX_TREE_SIZE);
- strncat(tmp_path, full_path,
- MAX_PATHCONF);
- rc = get_dfs_path(xid, pTcon->ses,
- tmp_path,
- cifs_sb->local_nls,
- &num_referrals, &refs,
- cifs_sb->mnt_cifs_flags &
- CIFS_MOUNT_MAP_SPECIAL_CHR);
- cFYI(1, ("Get DFS for %s rc = %d ",
- tmp_path, rc));
- if ((num_referrals == 0) && (rc == 0))
- rc = -EACCES;
- else {
- cFYI(1, ("num referral: %d",
- num_referrals));
- if (refs && refs->path_name) {
- strncpy(tmpbuffer,
- refs->path_name,
- len-1);
- }
- }
- kfree(refs);
- kfree(tmp_path);
-}
- /* BB add code like else decode referrals
- then memcpy to tmpbuffer and free referrals
- string array BB */
- }
+ /* If it is a DFS junction earlier we would have gotten
+ PATH_NOT_COVERED returned from server so we do
+ not need to request the DFS info here */
}
}
/* BB Anything else to do to handle recursive links? */
diff --git a/fs/cifs/misc.c b/fs/cifs/misc.c
index 1d69b80..4b17f8f 100644
--- a/fs/cifs/misc.c
+++ b/fs/cifs/misc.c
@@ -519,8 +519,7 @@
pnotify = (struct file_notify_information *)
((char *)&pSMBr->hdr.Protocol + data_offset);
cFYI(1, ("dnotify on %s Action: 0x%x",
- pnotify->FileName,
- pnotify->Action)); /* BB removeme BB */
+ pnotify->FileName, pnotify->Action));
/* cifs_dump_mem("Rcvd notify Data: ",buf,
sizeof(struct smb_hdr)+60); */
return true;
diff --git a/fs/cifs/netmisc.c b/fs/cifs/netmisc.c
index 00f4cff..8703d68 100644
--- a/fs/cifs/netmisc.c
+++ b/fs/cifs/netmisc.c
@@ -141,11 +141,11 @@
int ret = 0;
/* calculate length by finding first slash or NULL */
- if (address_family == AF_INET) {
+ if (address_family == AF_INET)
ret = in4_pton(cp, -1 /* len */, dst, '\\', NULL);
- } else if (address_family == AF_INET6) {
+ else if (address_family == AF_INET6)
ret = in6_pton(cp, -1 /* len */, dst , '\\', NULL);
- }
+
cFYI(DBG2, ("address conversion returned %d for %s", ret, cp));
if (ret > 0)
ret = 1;
diff --git a/fs/cifs/ntlmssp.h b/fs/cifs/ntlmssp.h
index 7170a9b..c377d80 100644
--- a/fs/cifs/ntlmssp.h
+++ b/fs/cifs/ntlmssp.h
@@ -64,7 +64,7 @@
} __attribute__((packed)) SECURITY_BUFFER;
typedef struct _NEGOTIATE_MESSAGE {
- __u8 Signature[sizeof (NTLMSSP_SIGNATURE)];
+ __u8 Signature[sizeof(NTLMSSP_SIGNATURE)];
__le32 MessageType; /* 1 */
__le32 NegotiateFlags;
SECURITY_BUFFER DomainName; /* RFC 1001 style and ASCII */
@@ -74,7 +74,7 @@
} __attribute__((packed)) NEGOTIATE_MESSAGE, *PNEGOTIATE_MESSAGE;
typedef struct _CHALLENGE_MESSAGE {
- __u8 Signature[sizeof (NTLMSSP_SIGNATURE)];
+ __u8 Signature[sizeof(NTLMSSP_SIGNATURE)];
__le32 MessageType; /* 2 */
SECURITY_BUFFER TargetName;
__le32 NegotiateFlags;
diff --git a/fs/cifs/readdir.c b/fs/cifs/readdir.c
index 34ec3210..83f3069 100644
--- a/fs/cifs/readdir.c
+++ b/fs/cifs/readdir.c
@@ -132,6 +132,7 @@
__u32 attr;
__u64 allocation_size;
__u64 end_of_file;
+ umode_t default_mode;
/* save mtime and size */
local_mtime = tmp_inode->i_mtime;
@@ -187,48 +188,54 @@
if (atomic_read(&cifsInfo->inUse) == 0) {
tmp_inode->i_uid = cifs_sb->mnt_uid;
tmp_inode->i_gid = cifs_sb->mnt_gid;
- /* set default mode. will override for dirs below */
- tmp_inode->i_mode = cifs_sb->mnt_file_mode;
- } else {
- /* mask off the type bits since it gets set
- below and we do not want to get two type
- bits set */
+ }
+
+ if (attr & ATTR_DIRECTORY)
+ default_mode = cifs_sb->mnt_dir_mode;
+ else
+ default_mode = cifs_sb->mnt_file_mode;
+
+ /* set initial permissions */
+ if ((atomic_read(&cifsInfo->inUse) == 0) ||
+ (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DYNPERM) == 0)
+ tmp_inode->i_mode = default_mode;
+ else {
+ /* just reenable write bits if !ATTR_READONLY */
+ if ((tmp_inode->i_mode & S_IWUGO) == 0 &&
+ (attr & ATTR_READONLY) == 0)
+ tmp_inode->i_mode |= (S_IWUGO & default_mode);
+
tmp_inode->i_mode &= ~S_IFMT;
}
- if (attr & ATTR_DIRECTORY) {
- *pobject_type = DT_DIR;
- /* override default perms since we do not lock dirs */
- if (atomic_read(&cifsInfo->inUse) == 0)
- tmp_inode->i_mode = cifs_sb->mnt_dir_mode;
- tmp_inode->i_mode |= S_IFDIR;
- } else if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL) &&
- (attr & ATTR_SYSTEM)) {
+ /* clear write bits if ATTR_READONLY is set */
+ if (attr & ATTR_READONLY)
+ tmp_inode->i_mode &= ~S_IWUGO;
+
+ /* set inode type */
+ if ((attr & ATTR_SYSTEM) &&
+ (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL)) {
if (end_of_file == 0) {
- *pobject_type = DT_FIFO;
tmp_inode->i_mode |= S_IFIFO;
+ *pobject_type = DT_FIFO;
} else {
- /* rather than get the type here, we mark the
- inode as needing revalidate and get the real type
- (blk vs chr vs. symlink) later ie in lookup */
- *pobject_type = DT_REG;
+ /*
+ * trying to get the type can be slow, so just call
+ * this a regular file for now, and mark for reval
+ */
tmp_inode->i_mode |= S_IFREG;
+ *pobject_type = DT_REG;
cifsInfo->time = 0;
}
-/* we no longer mark these because we could not follow them */
-/* } else if (attr & ATTR_REPARSE) {
- *pobject_type = DT_LNK;
- tmp_inode->i_mode |= S_IFLNK; */
} else {
- *pobject_type = DT_REG;
- tmp_inode->i_mode |= S_IFREG;
- if (attr & ATTR_READONLY)
- tmp_inode->i_mode &= ~(S_IWUGO);
- else if ((tmp_inode->i_mode & S_IWUGO) == 0)
- /* the ATTR_READONLY flag may have been changed on */
- /* server -- set any w bits allowed by mnt_file_mode */
- tmp_inode->i_mode |= (S_IWUGO & cifs_sb->mnt_file_mode);
- } /* could add code here - to validate if device or weird share type? */
+ if (attr & ATTR_DIRECTORY) {
+ tmp_inode->i_mode |= S_IFDIR;
+ *pobject_type = DT_DIR;
+ } else {
+ tmp_inode->i_mode |= S_IFREG;
+ *pobject_type = DT_REG;
+ }
+ }
/* can not fill in nlink here as in qpathinfo version and Unx search */
if (atomic_read(&cifsInfo->inUse) == 0)
@@ -670,10 +677,11 @@
(index_to_find < first_entry_in_buffer)) {
/* close and restart search */
cFYI(1, ("search backing up - close and restart search"));
- cifsFile->invalidHandle = true;
- CIFSFindClose(xid, pTcon, cifsFile->netfid);
- kfree(cifsFile->search_resume_name);
- cifsFile->search_resume_name = NULL;
+ if (!cifsFile->srch_inf.endOfSearch &&
+ !cifsFile->invalidHandle) {
+ cifsFile->invalidHandle = true;
+ CIFSFindClose(xid, pTcon, cifsFile->netfid);
+ }
if (cifsFile->srch_inf.ntwrk_buf_start) {
cFYI(1, ("freeing SMB ff cache buf on search rewind"));
if (cifsFile->srch_inf.smallBuf)
@@ -1040,9 +1048,7 @@
} /* else {
cifsFile->invalidHandle = true;
CIFSFindClose(xid, pTcon, cifsFile->netfid);
- }
- kfree(cifsFile->search_resume_name);
- cifsFile->search_resume_name = NULL; */
+ } */
rc = find_cifs_entry(xid, pTcon, file,
¤t_entry, &num_to_fill);
diff --git a/fs/compat.c b/fs/compat.c
index 332a869..ed43e17 100644
--- a/fs/compat.c
+++ b/fs/compat.c
@@ -1405,7 +1405,7 @@
/* execve success */
security_bprm_free(bprm);
acct_update_integrals(current);
- kfree(bprm);
+ free_bprm(bprm);
return retval;
}
@@ -1424,7 +1424,7 @@
}
out_kfree:
- kfree(bprm);
+ free_bprm(bprm);
out_ret:
return retval;
diff --git a/fs/dlm/lowcomms.c b/fs/dlm/lowcomms.c
index 7c1e5e5..637018c 100644
--- a/fs/dlm/lowcomms.c
+++ b/fs/dlm/lowcomms.c
@@ -50,6 +50,7 @@
#include <linux/pagemap.h>
#include <linux/idr.h>
#include <linux/file.h>
+#include <linux/mutex.h>
#include <linux/sctp.h>
#include <net/sctp/user.h>
@@ -138,7 +139,7 @@
static struct workqueue_struct *send_workqueue;
static DEFINE_IDR(connections_idr);
-static DECLARE_MUTEX(connections_lock);
+static DEFINE_MUTEX(connections_lock);
static int max_nodeid;
static struct kmem_cache *con_cache;
@@ -205,9 +206,9 @@
{
struct connection *con;
- down(&connections_lock);
+ mutex_lock(&connections_lock);
con = __nodeid2con(nodeid, allocation);
- up(&connections_lock);
+ mutex_unlock(&connections_lock);
return con;
}
@@ -218,15 +219,15 @@
int i;
struct connection *con;
- down(&connections_lock);
+ mutex_lock(&connections_lock);
for (i=0; i<=max_nodeid; i++) {
con = __nodeid2con(i, 0);
if (con && con->sctp_assoc == assoc_id) {
- up(&connections_lock);
+ mutex_unlock(&connections_lock);
return con;
}
}
- up(&connections_lock);
+ mutex_unlock(&connections_lock);
return NULL;
}
@@ -381,7 +382,7 @@
int i;
struct connection *con;
- down(&connections_lock);
+ mutex_lock(&connections_lock);
for (i=1; i<=max_nodeid; i++) {
con = __nodeid2con(i, 0);
if (!con)
@@ -393,7 +394,7 @@
}
}
}
- up(&connections_lock);
+ mutex_unlock(&connections_lock);
}
/* Something happened to an association */
@@ -930,7 +931,7 @@
* errors we try again until the max number of retries is reached.
*/
if (result != -EHOSTUNREACH && result != -ENETUNREACH &&
- result != -ENETDOWN && result != EINVAL
+ result != -ENETDOWN && result != -EINVAL
&& result != -EPROTONOSUPPORT) {
lowcomms_connect_sock(con);
result = 0;
@@ -1417,7 +1418,7 @@
/* Set all the flags to prevent any
socket activity.
*/
- down(&connections_lock);
+ mutex_lock(&connections_lock);
for (i = 0; i <= max_nodeid; i++) {
con = __nodeid2con(i, 0);
if (con) {
@@ -1426,11 +1427,11 @@
con->sock->sk->sk_user_data = NULL;
}
}
- up(&connections_lock);
+ mutex_unlock(&connections_lock);
work_stop();
- down(&connections_lock);
+ mutex_lock(&connections_lock);
clean_writequeues();
for (i = 0; i <= max_nodeid; i++) {
@@ -1443,7 +1444,7 @@
}
}
max_nodeid = 0;
- up(&connections_lock);
+ mutex_unlock(&connections_lock);
kmem_cache_destroy(con_cache);
idr_init(&connections_idr);
}
diff --git a/fs/dlm/netlink.c b/fs/dlm/netlink.c
index 7145936..18bda83 100644
--- a/fs/dlm/netlink.c
+++ b/fs/dlm/netlink.c
@@ -95,7 +95,7 @@
return rv;
}
-void __exit dlm_netlink_exit(void)
+void dlm_netlink_exit(void)
{
genl_unregister_ops(&family, &dlm_nl_ops);
genl_unregister_family(&family);
diff --git a/fs/dlm/plock.c b/fs/dlm/plock.c
index d6d6e37..78878c5 100644
--- a/fs/dlm/plock.c
+++ b/fs/dlm/plock.c
@@ -379,7 +379,7 @@
struct plock_xop *xop;
xop = (struct plock_xop *)op;
if (xop->callback)
- count = dlm_plock_callback(op);
+ dlm_plock_callback(op);
else
wake_up(&recv_wq);
} else
diff --git a/fs/dquot.c b/fs/dquot.c
index dfba162..5ac77da 100644
--- a/fs/dquot.c
+++ b/fs/dquot.c
@@ -1491,6 +1491,16 @@
/* We need to serialize quota_off() for device */
mutex_lock(&dqopt->dqonoff_mutex);
+
+ /*
+ * Skip everything if there's nothing to do. We have to do this because
+ * sometimes we are called when fill_super() failed and calling
+ * sync_fs() in such cases does no good.
+ */
+ if (!sb_any_quota_enabled(sb) && !sb_any_quota_suspended(sb)) {
+ mutex_unlock(&dqopt->dqonoff_mutex);
+ return 0;
+ }
for (cnt = 0; cnt < MAXQUOTAS; cnt++) {
toputinode[cnt] = NULL;
if (type != -1 && cnt != type)
diff --git a/fs/ecryptfs/crypto.c b/fs/ecryptfs/crypto.c
index cd62d75..e2832bc 100644
--- a/fs/ecryptfs/crypto.c
+++ b/fs/ecryptfs/crypto.c
@@ -1906,9 +1906,9 @@
goto out;
}
}
- mutex_unlock(&key_tfm_list_mutex);
(*tfm) = key_tfm->key_tfm;
(*tfm_mutex) = &key_tfm->key_tfm_mutex;
out:
+ mutex_unlock(&key_tfm_list_mutex);
return rc;
}
diff --git a/fs/ecryptfs/ecryptfs_kernel.h b/fs/ecryptfs/ecryptfs_kernel.h
index 951ee33..c15c257 100644
--- a/fs/ecryptfs/ecryptfs_kernel.h
+++ b/fs/ecryptfs/ecryptfs_kernel.h
@@ -660,8 +660,6 @@
int ecryptfs_keyring_auth_tok_for_sig(struct key **auth_tok_key,
struct ecryptfs_auth_tok **auth_tok,
char *sig);
-int ecryptfs_write_zeros(struct file *file, pgoff_t index, int start,
- int num_zeros);
int ecryptfs_write_lower(struct inode *ecryptfs_inode, char *data,
loff_t offset, size_t size);
int ecryptfs_write_lower_page_segment(struct inode *ecryptfs_inode,
diff --git a/fs/ecryptfs/inode.c b/fs/ecryptfs/inode.c
index 0a13973..c92cc1c 100644
--- a/fs/ecryptfs/inode.c
+++ b/fs/ecryptfs/inode.c
@@ -37,17 +37,11 @@
{
struct dentry *dir;
- dir = dget(dentry->d_parent);
+ dir = dget_parent(dentry);
mutex_lock_nested(&(dir->d_inode->i_mutex), I_MUTEX_PARENT);
return dir;
}
-static void unlock_parent(struct dentry *dentry)
-{
- mutex_unlock(&(dentry->d_parent->d_inode->i_mutex));
- dput(dentry->d_parent);
-}
-
static void unlock_dir(struct dentry *dir)
{
mutex_unlock(&dir->d_inode->i_mutex);
@@ -426,8 +420,9 @@
int rc = 0;
struct dentry *lower_dentry = ecryptfs_dentry_to_lower(dentry);
struct inode *lower_dir_inode = ecryptfs_inode_to_lower(dir);
+ struct dentry *lower_dir_dentry;
- lock_parent(lower_dentry);
+ lower_dir_dentry = lock_parent(lower_dentry);
rc = vfs_unlink(lower_dir_inode, lower_dentry);
if (rc) {
printk(KERN_ERR "Error in vfs_unlink; rc = [%d]\n", rc);
@@ -439,7 +434,7 @@
dentry->d_inode->i_ctime = dir->i_ctime;
d_drop(dentry);
out_unlock:
- unlock_parent(lower_dentry);
+ unlock_dir(lower_dir_dentry);
return rc;
}
diff --git a/fs/ecryptfs/miscdev.c b/fs/ecryptfs/miscdev.c
index 788995e..50c994a 100644
--- a/fs/ecryptfs/miscdev.c
+++ b/fs/ecryptfs/miscdev.c
@@ -243,7 +243,6 @@
struct ecryptfs_daemon *daemon;
struct ecryptfs_msg_ctx *msg_ctx;
size_t packet_length_size;
- u32 counter_nbo;
char packet_length[3];
size_t i;
size_t total_length;
@@ -257,12 +256,14 @@
mutex_lock(&daemon->mux);
if (daemon->flags & ECRYPTFS_DAEMON_ZOMBIE) {
rc = 0;
+ mutex_unlock(&ecryptfs_daemon_hash_mux);
printk(KERN_WARNING "%s: Attempt to read from zombified "
"daemon\n", __func__);
goto out_unlock_daemon;
}
if (daemon->flags & ECRYPTFS_DAEMON_IN_READ) {
rc = 0;
+ mutex_unlock(&ecryptfs_daemon_hash_mux);
goto out_unlock_daemon;
}
/* This daemon will not go away so long as this flag is set */
@@ -326,20 +327,18 @@
"pending message\n", __func__, count, total_length);
goto out_unlock_msg_ctx;
}
- i = 0;
- buf[i++] = msg_ctx->type;
- counter_nbo = cpu_to_be32(msg_ctx->counter);
- memcpy(&buf[i], (char *)&counter_nbo, 4);
- i += 4;
+ rc = -EFAULT;
+ if (put_user(msg_ctx->type, buf))
+ goto out_unlock_msg_ctx;
+ if (put_user(cpu_to_be32(msg_ctx->counter), (__be32 __user *)(buf + 1)))
+ goto out_unlock_msg_ctx;
+ i = 5;
if (msg_ctx->msg) {
- memcpy(&buf[i], packet_length, packet_length_size);
- i += packet_length_size;
- rc = copy_to_user(&buf[i], msg_ctx->msg, msg_ctx->msg_size);
- if (rc) {
- printk(KERN_ERR "%s: copy_to_user returned error "
- "[%d]\n", __func__, rc);
+ if (copy_to_user(&buf[i], packet_length, packet_length_size))
goto out_unlock_msg_ctx;
- }
+ i += packet_length_size;
+ if (copy_to_user(&buf[i], msg_ctx->msg, msg_ctx->msg_size))
+ goto out_unlock_msg_ctx;
i += msg_ctx->msg_size;
}
rc = i;
@@ -450,7 +449,8 @@
ecryptfs_miscdev_write(struct file *file, const char __user *buf,
size_t count, loff_t *ppos)
{
- u32 counter_nbo, seq;
+ __be32 counter_nbo;
+ u32 seq;
size_t packet_size, packet_size_length, i;
ssize_t sz = 0;
char *data;
@@ -483,7 +483,7 @@
count);
goto out_free;
}
- memcpy((char *)&counter_nbo, &data[i], 4);
+ memcpy(&counter_nbo, &data[i], 4);
seq = be32_to_cpu(counter_nbo);
i += 4;
rc = ecryptfs_parse_packet_length(&data[i], &packet_size,
diff --git a/fs/ecryptfs/read_write.c b/fs/ecryptfs/read_write.c
index ebf5515..75c2ea9 100644
--- a/fs/ecryptfs/read_write.c
+++ b/fs/ecryptfs/read_write.c
@@ -157,20 +157,6 @@
ecryptfs_page_idx, rc);
goto out;
}
- if (start_offset_in_page) {
- /* Read in the page from the lower
- * into the eCryptfs inode page cache,
- * decrypting */
- rc = ecryptfs_decrypt_page(ecryptfs_page);
- if (rc) {
- printk(KERN_ERR "%s: Error decrypting "
- "page; rc = [%d]\n",
- __func__, rc);
- ClearPageUptodate(ecryptfs_page);
- page_cache_release(ecryptfs_page);
- goto out;
- }
- }
ecryptfs_page_virt = kmap_atomic(ecryptfs_page, KM_USER0);
/*
@@ -349,14 +335,6 @@
ecryptfs_page_idx, rc);
goto out;
}
- rc = ecryptfs_decrypt_page(ecryptfs_page);
- if (rc) {
- printk(KERN_ERR "%s: Error decrypting "
- "page; rc = [%d]\n", __func__, rc);
- ClearPageUptodate(ecryptfs_page);
- page_cache_release(ecryptfs_page);
- goto out;
- }
ecryptfs_page_virt = kmap_atomic(ecryptfs_page, KM_USER0);
memcpy((data + data_offset),
((char *)ecryptfs_page_virt + start_offset_in_page),
diff --git a/fs/exec.c b/fs/exec.c
index aeaa979..9448f1b 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -736,7 +736,7 @@
tsk->active_mm = mm;
activate_mm(active_mm, mm);
task_unlock(tsk);
- mm_update_next_owner(mm);
+ mm_update_next_owner(old_mm);
arch_pick_mmap_layout(mm);
if (old_mm) {
up_read(&old_mm->mmap_sem);
@@ -860,6 +860,7 @@
no_thread_group:
exit_itimers(sig);
+ flush_itimer_signals();
if (leader)
release_task(leader);
@@ -1251,6 +1252,12 @@
EXPORT_SYMBOL(search_binary_handler);
+void free_bprm(struct linux_binprm *bprm)
+{
+ free_arg_pages(bprm);
+ kfree(bprm);
+}
+
/*
* sys_execve() executes a new program.
*/
@@ -1320,17 +1327,15 @@
retval = search_binary_handler(bprm,regs);
if (retval >= 0) {
/* execve success */
- free_arg_pages(bprm);
security_bprm_free(bprm);
acct_update_integrals(current);
- kfree(bprm);
+ free_bprm(bprm);
if (displaced)
put_files_struct(displaced);
return retval;
}
out:
- free_arg_pages(bprm);
if (bprm->security)
security_bprm_free(bprm);
@@ -1344,7 +1349,7 @@
fput(bprm->file);
}
out_kfree:
- kfree(bprm);
+ free_bprm(bprm);
out_files:
if (displaced)
diff --git a/fs/ext3/resize.c b/fs/ext3/resize.c
index 28cfd0b..77278e9 100644
--- a/fs/ext3/resize.c
+++ b/fs/ext3/resize.c
@@ -580,7 +580,8 @@
}
blk = EXT3_SB(sb)->s_sbh->b_blocknr + 1 + EXT3_SB(sb)->s_gdb_count;
- data = (__le32 *)dind->b_data + EXT3_SB(sb)->s_gdb_count;
+ data = (__le32 *)dind->b_data + (EXT3_SB(sb)->s_gdb_count %
+ EXT3_ADDR_PER_BLOCK(sb));
end = (__le32 *)dind->b_data + EXT3_ADDR_PER_BLOCK(sb);
/* Get each reserved primary GDT block and verify it holds backups */
diff --git a/fs/ext3/xattr.c b/fs/ext3/xattr.c
index d4a4f0e..175414a 100644
--- a/fs/ext3/xattr.c
+++ b/fs/ext3/xattr.c
@@ -1000,6 +1000,11 @@
i.value = NULL;
error = ext3_xattr_block_set(handle, inode, &i, &bs);
} else if (error == -ENOSPC) {
+ if (EXT3_I(inode)->i_file_acl && !bs.s.base) {
+ error = ext3_xattr_block_find(inode, &i, &bs);
+ if (error)
+ goto cleanup;
+ }
error = ext3_xattr_block_set(handle, inode, &i, &bs);
if (error)
goto cleanup;
diff --git a/fs/ext4/balloc.c b/fs/ext4/balloc.c
index da99437..9cc80b9 100644
--- a/fs/ext4/balloc.c
+++ b/fs/ext4/balloc.c
@@ -43,6 +43,46 @@
}
+static int ext4_block_in_group(struct super_block *sb, ext4_fsblk_t block,
+ ext4_group_t block_group)
+{
+ ext4_group_t actual_group;
+ ext4_get_group_no_and_offset(sb, block, &actual_group, 0);
+ if (actual_group == block_group)
+ return 1;
+ return 0;
+}
+
+static int ext4_group_used_meta_blocks(struct super_block *sb,
+ ext4_group_t block_group)
+{
+ ext4_fsblk_t tmp;
+ struct ext4_sb_info *sbi = EXT4_SB(sb);
+ /* block bitmap, inode bitmap, and inode table blocks */
+ int used_blocks = sbi->s_itb_per_group + 2;
+
+ if (EXT4_HAS_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_FLEX_BG)) {
+ struct ext4_group_desc *gdp;
+ struct buffer_head *bh;
+
+ gdp = ext4_get_group_desc(sb, block_group, &bh);
+ if (!ext4_block_in_group(sb, ext4_block_bitmap(sb, gdp),
+ block_group))
+ used_blocks--;
+
+ if (!ext4_block_in_group(sb, ext4_inode_bitmap(sb, gdp),
+ block_group))
+ used_blocks--;
+
+ tmp = ext4_inode_table(sb, gdp);
+ for (; tmp < ext4_inode_table(sb, gdp) +
+ sbi->s_itb_per_group; tmp++) {
+ if (!ext4_block_in_group(sb, tmp, block_group))
+ used_blocks -= 1;
+ }
+ }
+ return used_blocks;
+}
/* Initializes an uninitialized block bitmap if given, and returns the
* number of blocks free in the group. */
unsigned ext4_init_block_bitmap(struct super_block *sb, struct buffer_head *bh,
@@ -105,20 +145,34 @@
free_blocks = group_blocks - bit_max;
if (bh) {
- ext4_fsblk_t start;
+ ext4_fsblk_t start, tmp;
+ int flex_bg = 0;
for (bit = 0; bit < bit_max; bit++)
ext4_set_bit(bit, bh->b_data);
start = ext4_group_first_block_no(sb, block_group);
- /* Set bits for block and inode bitmaps, and inode table */
- ext4_set_bit(ext4_block_bitmap(sb, gdp) - start, bh->b_data);
- ext4_set_bit(ext4_inode_bitmap(sb, gdp) - start, bh->b_data);
- for (bit = (ext4_inode_table(sb, gdp) - start),
- bit_max = bit + sbi->s_itb_per_group; bit < bit_max; bit++)
- ext4_set_bit(bit, bh->b_data);
+ if (EXT4_HAS_INCOMPAT_FEATURE(sb,
+ EXT4_FEATURE_INCOMPAT_FLEX_BG))
+ flex_bg = 1;
+ /* Set bits for block and inode bitmaps, and inode table */
+ tmp = ext4_block_bitmap(sb, gdp);
+ if (!flex_bg || ext4_block_in_group(sb, tmp, block_group))
+ ext4_set_bit(tmp - start, bh->b_data);
+
+ tmp = ext4_inode_bitmap(sb, gdp);
+ if (!flex_bg || ext4_block_in_group(sb, tmp, block_group))
+ ext4_set_bit(tmp - start, bh->b_data);
+
+ tmp = ext4_inode_table(sb, gdp);
+ for (; tmp < ext4_inode_table(sb, gdp) +
+ sbi->s_itb_per_group; tmp++) {
+ if (!flex_bg ||
+ ext4_block_in_group(sb, tmp, block_group))
+ ext4_set_bit(tmp - start, bh->b_data);
+ }
/*
* Also if the number of blocks within the group is
* less than the blocksize * 8 ( which is the size
@@ -126,8 +180,7 @@
*/
mark_bitmap_end(group_blocks, sb->s_blocksize * 8, bh->b_data);
}
-
- return free_blocks - sbi->s_itb_per_group - 2;
+ return free_blocks - ext4_group_used_meta_blocks(sb, block_group);
}
@@ -287,11 +340,11 @@
(int)block_group, (unsigned long long)bitmap_blk);
return NULL;
}
- if (!ext4_valid_block_bitmap(sb, desc, block_group, bh)) {
- put_bh(bh);
- return NULL;
- }
-
+ ext4_valid_block_bitmap(sb, desc, block_group, bh);
+ /*
+ * file system mounted not to panic on error,
+ * continue with corrupt bitmap
+ */
return bh;
}
/*
@@ -1770,7 +1823,12 @@
"Allocating block in system zone - "
"blocks from %llu, length %lu",
ret_block, num);
- goto out;
+ /*
+ * claim_block marked the blocks we allocated
+ * as in use. So we may want to selectively
+ * mark some of the blocks as free
+ */
+ goto retry_alloc;
}
performed_allocation = 1;
diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c
index fbec2ef..c9900aa 100644
--- a/fs/ext4/mballoc.c
+++ b/fs/ext4/mballoc.c
@@ -2639,8 +2639,7 @@
struct proc_dir_entry *proc;
char devname[64];
- snprintf(devname, sizeof(devname) - 1, "%s",
- bdevname(sb->s_bdev, devname));
+ bdevname(sb->s_bdev, devname);
sbi->s_mb_proc = proc_mkdir(devname, proc_root_ext4);
MB_PROC_HANDLER(EXT4_MB_STATS_NAME, stats);
@@ -2674,8 +2673,7 @@
if (sbi->s_mb_proc == NULL)
return -EINVAL;
- snprintf(devname, sizeof(devname) - 1, "%s",
- bdevname(sb->s_bdev, devname));
+ bdevname(sb->s_bdev, devname);
remove_proc_entry(EXT4_MB_GROUP_PREALLOC, sbi->s_mb_proc);
remove_proc_entry(EXT4_MB_STREAM_REQ, sbi->s_mb_proc);
remove_proc_entry(EXT4_MB_ORDER2_REQ, sbi->s_mb_proc);
@@ -2738,7 +2736,7 @@
struct ext4_sb_info *sbi;
struct super_block *sb;
ext4_fsblk_t block;
- int err;
+ int err, len;
BUG_ON(ac->ac_status != AC_STATUS_FOUND);
BUG_ON(ac->ac_b_ex.fe_len <= 0);
@@ -2747,8 +2745,6 @@
sbi = EXT4_SB(sb);
es = sbi->s_es;
- ext4_debug("using block group %lu(%d)\n", ac->ac_b_ex.fe_group,
- gdp->bg_free_blocks_count);
err = -EIO;
bitmap_bh = read_block_bitmap(sb, ac->ac_b_ex.fe_group);
@@ -2764,6 +2760,9 @@
if (!gdp)
goto out_err;
+ ext4_debug("using block group %lu(%d)\n", ac->ac_b_ex.fe_group,
+ gdp->bg_free_blocks_count);
+
err = ext4_journal_get_write_access(handle, gdp_bh);
if (err)
goto out_err;
@@ -2772,14 +2771,27 @@
+ ac->ac_b_ex.fe_start
+ le32_to_cpu(es->s_first_data_block);
- if (block == ext4_block_bitmap(sb, gdp) ||
- block == ext4_inode_bitmap(sb, gdp) ||
- in_range(block, ext4_inode_table(sb, gdp),
- EXT4_SB(sb)->s_itb_per_group)) {
-
+ len = ac->ac_b_ex.fe_len;
+ if (in_range(ext4_block_bitmap(sb, gdp), block, len) ||
+ in_range(ext4_inode_bitmap(sb, gdp), block, len) ||
+ in_range(block, ext4_inode_table(sb, gdp),
+ EXT4_SB(sb)->s_itb_per_group) ||
+ in_range(block + len - 1, ext4_inode_table(sb, gdp),
+ EXT4_SB(sb)->s_itb_per_group)) {
ext4_error(sb, __func__,
"Allocating block in system zone - block = %llu",
block);
+ /* File system mounted not to panic on error
+ * Fix the bitmap and repeat the block allocation
+ * We leak some of the blocks here.
+ */
+ mb_set_bits(sb_bgl_lock(sbi, ac->ac_b_ex.fe_group),
+ bitmap_bh->b_data, ac->ac_b_ex.fe_start,
+ ac->ac_b_ex.fe_len);
+ err = ext4_journal_dirty_metadata(handle, bitmap_bh);
+ if (!err)
+ err = -EAGAIN;
+ goto out_err;
}
#ifdef AGGRESSIVE_CHECK
{
@@ -2882,12 +2894,11 @@
if (size < i_size_read(ac->ac_inode))
size = i_size_read(ac->ac_inode);
- /* max available blocks in a free group */
- max = EXT4_BLOCKS_PER_GROUP(ac->ac_sb) - 1 - 1 -
- EXT4_SB(ac->ac_sb)->s_itb_per_group;
+ /* max size of free chunks */
+ max = 2 << bsbits;
-#define NRL_CHECK_SIZE(req, size, max,bits) \
- (req <= (size) || max <= ((size) >> bits))
+#define NRL_CHECK_SIZE(req, size, max, chunk_size) \
+ (req <= (size) || max <= (chunk_size))
/* first, try to predict filesize */
/* XXX: should this table be tunable? */
@@ -2906,16 +2917,16 @@
size = 512 * 1024;
} else if (size <= 1024 * 1024) {
size = 1024 * 1024;
- } else if (NRL_CHECK_SIZE(size, 4 * 1024 * 1024, max, bsbits)) {
+ } else if (NRL_CHECK_SIZE(size, 4 * 1024 * 1024, max, 2 * 1024)) {
start_off = ((loff_t)ac->ac_o_ex.fe_logical >>
- (20 - bsbits)) << 20;
- size = 1024 * 1024;
- } else if (NRL_CHECK_SIZE(size, 8 * 1024 * 1024, max, bsbits)) {
+ (21 - bsbits)) << 21;
+ size = 2 * 1024 * 1024;
+ } else if (NRL_CHECK_SIZE(size, 8 * 1024 * 1024, max, 4 * 1024)) {
start_off = ((loff_t)ac->ac_o_ex.fe_logical >>
(22 - bsbits)) << 22;
size = 4 * 1024 * 1024;
} else if (NRL_CHECK_SIZE(ac->ac_o_ex.fe_len,
- (8<<20)>>bsbits, max, bsbits)) {
+ (8<<20)>>bsbits, max, 8 * 1024)) {
start_off = ((loff_t)ac->ac_o_ex.fe_logical >>
(23 - bsbits)) << 23;
size = 8 * 1024 * 1024;
@@ -3084,8 +3095,7 @@
static void ext4_mb_use_group_pa(struct ext4_allocation_context *ac,
struct ext4_prealloc_space *pa)
{
- unsigned len = ac->ac_o_ex.fe_len;
-
+ unsigned int len = ac->ac_o_ex.fe_len;
ext4_get_group_no_and_offset(ac->ac_sb, pa->pa_pstart,
&ac->ac_b_ex.fe_group,
&ac->ac_b_ex.fe_start);
@@ -4035,7 +4045,6 @@
ac->ac_op = EXT4_MB_HISTORY_ALLOC;
ext4_mb_normalize_request(ac, ar);
-
repeat:
/* allocate space in core */
ext4_mb_regular_allocator(ac);
@@ -4049,10 +4058,21 @@
}
if (likely(ac->ac_status == AC_STATUS_FOUND)) {
- ext4_mb_mark_diskspace_used(ac, handle);
- *errp = 0;
- block = ext4_grp_offs_to_block(sb, &ac->ac_b_ex);
- ar->len = ac->ac_b_ex.fe_len;
+ *errp = ext4_mb_mark_diskspace_used(ac, handle);
+ if (*errp == -EAGAIN) {
+ ac->ac_b_ex.fe_group = 0;
+ ac->ac_b_ex.fe_start = 0;
+ ac->ac_b_ex.fe_len = 0;
+ ac->ac_status = AC_STATUS_CONTINUE;
+ goto repeat;
+ } else if (*errp) {
+ ac->ac_b_ex.fe_len = 0;
+ ar->len = 0;
+ ext4_mb_show_ac(ac);
+ } else {
+ block = ext4_grp_offs_to_block(sb, &ac->ac_b_ex);
+ ar->len = ac->ac_b_ex.fe_len;
+ }
} else {
freed = ext4_mb_discard_preallocations(sb, ac->ac_o_ex.fe_len);
if (freed)
@@ -4239,6 +4259,8 @@
ext4_error(sb, __func__,
"Freeing blocks in system zone - "
"Block = %lu, count = %lu", block, count);
+ /* err = 0. ext4_std_error should be a no op */
+ goto error_return;
}
BUFFER_TRACE(bitmap_bh, "getting write access");
diff --git a/fs/ext4/resize.c b/fs/ext4/resize.c
index 9f086a6..9ecb92f 100644
--- a/fs/ext4/resize.c
+++ b/fs/ext4/resize.c
@@ -563,7 +563,8 @@
}
blk = EXT4_SB(sb)->s_sbh->b_blocknr + 1 + EXT4_SB(sb)->s_gdb_count;
- data = (__le32 *)dind->b_data + EXT4_SB(sb)->s_gdb_count;
+ data = (__le32 *)dind->b_data + (EXT4_SB(sb)->s_gdb_count %
+ EXT4_ADDR_PER_BLOCK(sb));
end = (__le32 *)dind->b_data + EXT4_ADDR_PER_BLOCK(sb);
/* Get each reserved primary GDT block and verify it holds backups */
diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index 52dd067..cb96f127c 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -671,6 +671,7 @@
unsigned long def_mount_opts;
struct super_block *sb = vfs->mnt_sb;
struct ext4_sb_info *sbi = EXT4_SB(sb);
+ journal_t *journal = sbi->s_journal;
struct ext4_super_block *es = sbi->s_es;
def_mount_opts = le32_to_cpu(es->s_default_mount_opts);
@@ -729,8 +730,15 @@
seq_printf(seq, ",commit=%u",
(unsigned) (sbi->s_commit_interval / HZ));
}
- if (test_opt(sb, BARRIER))
- seq_puts(seq, ",barrier=1");
+ /*
+ * We're changing the default of barrier mount option, so
+ * let's always display its mount state so it's clear what its
+ * status is.
+ */
+ seq_puts(seq, ",barrier=");
+ seq_puts(seq, test_opt(sb, BARRIER) ? "1" : "0");
+ if (test_opt(sb, JOURNAL_ASYNC_COMMIT))
+ seq_puts(seq, ",journal_async_commit");
if (test_opt(sb, NOBH))
seq_puts(seq, ",nobh");
if (!test_opt(sb, EXTENTS))
@@ -979,7 +987,7 @@
int data_opt = 0;
int option;
#ifdef CONFIG_QUOTA
- int qtype;
+ int qtype, qfmt;
char *qname;
#endif
@@ -1162,9 +1170,11 @@
case Opt_grpjquota:
qtype = GRPQUOTA;
set_qf_name:
- if (sb_any_quota_enabled(sb)) {
+ if ((sb_any_quota_enabled(sb) ||
+ sb_any_quota_suspended(sb)) &&
+ !sbi->s_qf_names[qtype]) {
printk(KERN_ERR
- "EXT4-fs: Cannot change journalled "
+ "EXT4-fs: Cannot change journaled "
"quota options when quota turned on.\n");
return 0;
}
@@ -1200,9 +1210,11 @@
case Opt_offgrpjquota:
qtype = GRPQUOTA;
clear_qf_name:
- if (sb_any_quota_enabled(sb)) {
+ if ((sb_any_quota_enabled(sb) ||
+ sb_any_quota_suspended(sb)) &&
+ sbi->s_qf_names[qtype]) {
printk(KERN_ERR "EXT4-fs: Cannot change "
- "journalled quota options when "
+ "journaled quota options when "
"quota turned on.\n");
return 0;
}
@@ -1213,10 +1225,20 @@
sbi->s_qf_names[qtype] = NULL;
break;
case Opt_jqfmt_vfsold:
- sbi->s_jquota_fmt = QFMT_VFS_OLD;
- break;
+ qfmt = QFMT_VFS_OLD;
+ goto set_qf_format;
case Opt_jqfmt_vfsv0:
- sbi->s_jquota_fmt = QFMT_VFS_V0;
+ qfmt = QFMT_VFS_V0;
+set_qf_format:
+ if ((sb_any_quota_enabled(sb) ||
+ sb_any_quota_suspended(sb)) &&
+ sbi->s_jquota_fmt != qfmt) {
+ printk(KERN_ERR "EXT4-fs: Cannot change "
+ "journaled quota options when "
+ "quota turned on.\n");
+ return 0;
+ }
+ sbi->s_jquota_fmt = qfmt;
break;
case Opt_quota:
case Opt_usrquota:
@@ -1241,6 +1263,9 @@
case Opt_quota:
case Opt_usrquota:
case Opt_grpquota:
+ printk(KERN_ERR
+ "EXT4-fs: quota options not supported.\n");
+ break;
case Opt_usrjquota:
case Opt_grpjquota:
case Opt_offusrjquota:
@@ -1248,7 +1273,7 @@
case Opt_jqfmt_vfsold:
case Opt_jqfmt_vfsv0:
printk(KERN_ERR
- "EXT4-fs: journalled quota options not "
+ "EXT4-fs: journaled quota options not "
"supported.\n");
break;
case Opt_noquota:
@@ -1333,14 +1358,14 @@
}
if (!sbi->s_jquota_fmt) {
- printk(KERN_ERR "EXT4-fs: journalled quota format "
+ printk(KERN_ERR "EXT4-fs: journaled quota format "
"not specified.\n");
return 0;
}
} else {
if (sbi->s_jquota_fmt) {
- printk(KERN_ERR "EXT4-fs: journalled quota format "
- "specified with no journalling "
+ printk(KERN_ERR "EXT4-fs: journaled quota format "
+ "specified with no journaling "
"enabled.\n");
return 0;
}
@@ -1581,7 +1606,7 @@
int ret = ext4_quota_on_mount(sb, i);
if (ret < 0)
printk(KERN_ERR
- "EXT4-fs: Cannot turn on journalled "
+ "EXT4-fs: Cannot turn on journaled "
"quota: error %d\n", ret);
}
}
@@ -1890,6 +1915,7 @@
sbi->s_resgid = le16_to_cpu(es->s_def_resgid);
set_opt(sbi->s_mount_opt, RESERVATION);
+ set_opt(sbi->s_mount_opt, BARRIER);
/*
* turn on extents feature by default in ext4 filesystem
@@ -2172,6 +2198,29 @@
EXT4_HAS_COMPAT_FEATURE(sb, EXT4_FEATURE_COMPAT_HAS_JOURNAL)) {
if (ext4_load_journal(sb, es, journal_devnum))
goto failed_mount3;
+ if (!(sb->s_flags & MS_RDONLY) &&
+ EXT4_SB(sb)->s_journal->j_failed_commit) {
+ printk(KERN_CRIT "EXT4-fs error (device %s): "
+ "ext4_fill_super: Journal transaction "
+ "%u is corrupt\n", sb->s_id,
+ EXT4_SB(sb)->s_journal->j_failed_commit);
+ if (test_opt (sb, ERRORS_RO)) {
+ printk (KERN_CRIT
+ "Mounting filesystem read-only\n");
+ sb->s_flags |= MS_RDONLY;
+ EXT4_SB(sb)->s_mount_state |= EXT4_ERROR_FS;
+ es->s_state |= cpu_to_le16(EXT4_ERROR_FS);
+ }
+ if (test_opt(sb, ERRORS_PANIC)) {
+ EXT4_SB(sb)->s_mount_state |= EXT4_ERROR_FS;
+ es->s_state |= cpu_to_le16(EXT4_ERROR_FS);
+ ext4_commit_super(sb, es, 1);
+ printk(KERN_CRIT
+ "EXT4-fs (device %s): mount failed\n",
+ sb->s_id);
+ goto failed_mount4;
+ }
+ }
} else if (journal_inum) {
if (ext4_create_journal(sb, es, journal_inum))
goto failed_mount3;
@@ -3106,7 +3155,7 @@
static int ext4_mark_dquot_dirty(struct dquot *dquot)
{
- /* Are we journalling quotas? */
+ /* Are we journaling quotas? */
if (EXT4_SB(dquot->dq_sb)->s_qf_names[USRQUOTA] ||
EXT4_SB(dquot->dq_sb)->s_qf_names[GRPQUOTA]) {
dquot_mark_dquot_dirty(dquot);
@@ -3153,23 +3202,42 @@
if (!test_opt(sb, QUOTA))
return -EINVAL;
- /* Not journalling quota? */
- if ((!EXT4_SB(sb)->s_qf_names[USRQUOTA] &&
- !EXT4_SB(sb)->s_qf_names[GRPQUOTA]) || remount)
+ /* When remounting, no checks are needed and in fact, path is NULL */
+ if (remount)
return vfs_quota_on(sb, type, format_id, path, remount);
+
err = path_lookup(path, LOOKUP_FOLLOW, &nd);
if (err)
return err;
+
/* Quotafile not on the same filesystem? */
if (nd.path.mnt->mnt_sb != sb) {
path_put(&nd.path);
return -EXDEV;
}
- /* Quotafile not of fs root? */
- if (nd.path.dentry->d_parent->d_inode != sb->s_root->d_inode)
- printk(KERN_WARNING
- "EXT4-fs: Quota file not on filesystem root. "
- "Journalled quota will not work.\n");
+ /* Journaling quota? */
+ if (EXT4_SB(sb)->s_qf_names[type]) {
+ /* Quotafile not of fs root? */
+ if (nd.path.dentry->d_parent->d_inode != sb->s_root->d_inode)
+ printk(KERN_WARNING
+ "EXT4-fs: Quota file not on filesystem root. "
+ "Journaled quota will not work.\n");
+ }
+
+ /*
+ * When we journal data on quota file, we have to flush journal to see
+ * all updates to the file when we bypass pagecache...
+ */
+ if (ext4_should_journal_data(nd.path.dentry->d_inode)) {
+ /*
+ * We don't need to lock updates but journal_flush() could
+ * otherwise be livelocked...
+ */
+ jbd2_journal_lock_updates(EXT4_SB(sb)->s_journal);
+ jbd2_journal_flush(EXT4_SB(sb)->s_journal);
+ jbd2_journal_unlock_updates(EXT4_SB(sb)->s_journal);
+ }
+
path_put(&nd.path);
return vfs_quota_on(sb, type, format_id, path, remount);
}
diff --git a/fs/ext4/xattr.c b/fs/ext4/xattr.c
index 3fbc2c6..ff08633 100644
--- a/fs/ext4/xattr.c
+++ b/fs/ext4/xattr.c
@@ -1009,6 +1009,11 @@
i.value = NULL;
error = ext4_xattr_block_set(handle, inode, &i, &bs);
} else if (error == -ENOSPC) {
+ if (EXT4_I(inode)->i_file_acl && !bs.s.base) {
+ error = ext4_xattr_block_find(inode, &i, &bs);
+ if (error)
+ goto cleanup;
+ }
error = ext4_xattr_block_set(handle, inode, &i, &bs);
if (error)
goto cleanup;
diff --git a/fs/fat/file.c b/fs/fat/file.c
index 27cc116..771326b 100644
--- a/fs/fat/file.c
+++ b/fs/fat/file.c
@@ -257,26 +257,34 @@
}
EXPORT_SYMBOL_GPL(fat_getattr);
-static int fat_check_mode(const struct msdos_sb_info *sbi, struct inode *inode,
- mode_t mode)
+static int fat_sanitize_mode(const struct msdos_sb_info *sbi,
+ struct inode *inode, umode_t *mode_ptr)
{
- mode_t mask, req = mode & ~S_IFMT;
+ mode_t mask, perm;
- if (S_ISREG(mode))
+ /*
+ * Note, the basic check is already done by a caller of
+ * (attr->ia_mode & ~MSDOS_VALID_MODE)
+ */
+
+ if (S_ISREG(inode->i_mode))
mask = sbi->options.fs_fmask;
else
mask = sbi->options.fs_dmask;
+ perm = *mode_ptr & ~(S_IFMT | mask);
+
/*
* Of the r and x bits, all (subject to umask) must be present. Of the
* w bits, either all (subject to umask) or none must be present.
*/
- req &= ~mask;
- if ((req & (S_IRUGO | S_IXUGO)) != (inode->i_mode & (S_IRUGO|S_IXUGO)))
+ if ((perm & (S_IRUGO | S_IXUGO)) != (inode->i_mode & (S_IRUGO|S_IXUGO)))
return -EPERM;
- if ((req & S_IWUGO) && ((req & S_IWUGO) != (S_IWUGO & ~mask)))
+ if ((perm & S_IWUGO) && ((perm & S_IWUGO) != (S_IWUGO & ~mask)))
return -EPERM;
+ *mode_ptr &= S_IFMT | perm;
+
return 0;
}
@@ -299,7 +307,7 @@
{
struct msdos_sb_info *sbi = MSDOS_SB(dentry->d_sb);
struct inode *inode = dentry->d_inode;
- int mask, error = 0;
+ int error = 0;
unsigned int ia_valid;
lock_kernel();
@@ -332,12 +340,13 @@
error = 0;
goto out;
}
+
if (((attr->ia_valid & ATTR_UID) &&
(attr->ia_uid != sbi->options.fs_uid)) ||
((attr->ia_valid & ATTR_GID) &&
(attr->ia_gid != sbi->options.fs_gid)) ||
((attr->ia_valid & ATTR_MODE) &&
- fat_check_mode(sbi, inode, attr->ia_mode) < 0))
+ (attr->ia_mode & ~MSDOS_VALID_MODE)))
error = -EPERM;
if (error) {
@@ -346,15 +355,16 @@
goto out;
}
- error = inode_setattr(inode, attr);
- if (error)
- goto out;
+ /*
+ * We don't return -EPERM here. Yes, strange, but this is too
+ * old behavior.
+ */
+ if (attr->ia_valid & ATTR_MODE) {
+ if (fat_sanitize_mode(sbi, inode, &attr->ia_mode) < 0)
+ attr->ia_valid &= ~ATTR_MODE;
+ }
- if (S_ISDIR(inode->i_mode))
- mask = sbi->options.fs_dmask;
- else
- mask = sbi->options.fs_fmask;
- inode->i_mode &= S_IFMT | (S_IRWXUGO & ~mask);
+ error = inode_setattr(inode, attr);
out:
unlock_kernel();
return error;
diff --git a/fs/file.c b/fs/file.c
index 4c6f0ea..7b3887e 100644
--- a/fs/file.c
+++ b/fs/file.c
@@ -26,6 +26,8 @@
};
int sysctl_nr_open __read_mostly = 1024*1024;
+int sysctl_nr_open_min = BITS_PER_LONG;
+int sysctl_nr_open_max = 1024 * 1024; /* raised later */
/*
* We use this list to defer free fdtables that have vmalloced
@@ -119,8 +121,6 @@
unsigned int cpy, set;
BUG_ON(nfdt->max_fds < ofdt->max_fds);
- if (ofdt->max_fds == 0)
- return;
cpy = ofdt->max_fds * sizeof(struct file *);
set = (nfdt->max_fds - ofdt->max_fds) * sizeof(struct file *);
@@ -261,6 +261,139 @@
return expand_fdtable(files, nr);
}
+static int count_open_files(struct fdtable *fdt)
+{
+ int size = fdt->max_fds;
+ int i;
+
+ /* Find the last open fd */
+ for (i = size/(8*sizeof(long)); i > 0; ) {
+ if (fdt->open_fds->fds_bits[--i])
+ break;
+ }
+ i = (i+1) * 8 * sizeof(long);
+ return i;
+}
+
+/*
+ * Allocate a new files structure and copy contents from the
+ * passed in files structure.
+ * errorp will be valid only when the returned files_struct is NULL.
+ */
+struct files_struct *dup_fd(struct files_struct *oldf, int *errorp)
+{
+ struct files_struct *newf;
+ struct file **old_fds, **new_fds;
+ int open_files, size, i;
+ struct fdtable *old_fdt, *new_fdt;
+
+ *errorp = -ENOMEM;
+ newf = kmem_cache_alloc(files_cachep, GFP_KERNEL);
+ if (!newf)
+ goto out;
+
+ atomic_set(&newf->count, 1);
+
+ spin_lock_init(&newf->file_lock);
+ newf->next_fd = 0;
+ new_fdt = &newf->fdtab;
+ new_fdt->max_fds = NR_OPEN_DEFAULT;
+ new_fdt->close_on_exec = (fd_set *)&newf->close_on_exec_init;
+ new_fdt->open_fds = (fd_set *)&newf->open_fds_init;
+ new_fdt->fd = &newf->fd_array[0];
+ INIT_RCU_HEAD(&new_fdt->rcu);
+ new_fdt->next = NULL;
+
+ spin_lock(&oldf->file_lock);
+ old_fdt = files_fdtable(oldf);
+ open_files = count_open_files(old_fdt);
+
+ /*
+ * Check whether we need to allocate a larger fd array and fd set.
+ */
+ while (unlikely(open_files > new_fdt->max_fds)) {
+ spin_unlock(&oldf->file_lock);
+
+ if (new_fdt != &newf->fdtab) {
+ free_fdarr(new_fdt);
+ free_fdset(new_fdt);
+ kfree(new_fdt);
+ }
+
+ new_fdt = alloc_fdtable(open_files - 1);
+ if (!new_fdt) {
+ *errorp = -ENOMEM;
+ goto out_release;
+ }
+
+ /* beyond sysctl_nr_open; nothing to do */
+ if (unlikely(new_fdt->max_fds < open_files)) {
+ free_fdarr(new_fdt);
+ free_fdset(new_fdt);
+ kfree(new_fdt);
+ *errorp = -EMFILE;
+ goto out_release;
+ }
+
+ /*
+ * Reacquire the oldf lock and a pointer to its fd table
+ * who knows it may have a new bigger fd table. We need
+ * the latest pointer.
+ */
+ spin_lock(&oldf->file_lock);
+ old_fdt = files_fdtable(oldf);
+ open_files = count_open_files(old_fdt);
+ }
+
+ old_fds = old_fdt->fd;
+ new_fds = new_fdt->fd;
+
+ memcpy(new_fdt->open_fds->fds_bits,
+ old_fdt->open_fds->fds_bits, open_files/8);
+ memcpy(new_fdt->close_on_exec->fds_bits,
+ old_fdt->close_on_exec->fds_bits, open_files/8);
+
+ for (i = open_files; i != 0; i--) {
+ struct file *f = *old_fds++;
+ if (f) {
+ get_file(f);
+ } else {
+ /*
+ * The fd may be claimed in the fd bitmap but not yet
+ * instantiated in the files array if a sibling thread
+ * is partway through open(). So make sure that this
+ * fd is available to the new process.
+ */
+ FD_CLR(open_files - i, new_fdt->open_fds);
+ }
+ rcu_assign_pointer(*new_fds++, f);
+ }
+ spin_unlock(&oldf->file_lock);
+
+ /* compute the remainder to be cleared */
+ size = (new_fdt->max_fds - open_files) * sizeof(struct file *);
+
+ /* This is long word aligned thus could use a optimized version */
+ memset(new_fds, 0, size);
+
+ if (new_fdt->max_fds > open_files) {
+ int left = (new_fdt->max_fds-open_files)/8;
+ int start = open_files / (8 * sizeof(unsigned long));
+
+ memset(&new_fdt->open_fds->fds_bits[start], 0, left);
+ memset(&new_fdt->close_on_exec->fds_bits[start], 0, left);
+ }
+
+ rcu_assign_pointer(newf->fdt, new_fdt);
+
+ return newf;
+
+out_release:
+ kmem_cache_free(files_cachep, newf);
+out:
+ return NULL;
+}
+
static void __devinit fdtable_defer_list_init(int cpu)
{
struct fdtable_defer *fddef = &per_cpu(fdtable_defer_list, cpu);
@@ -274,4 +407,19 @@
int i;
for_each_possible_cpu(i)
fdtable_defer_list_init(i);
+ sysctl_nr_open_max = min((size_t)INT_MAX, ~(size_t)0/sizeof(void *)) &
+ -BITS_PER_LONG;
}
+
+struct files_struct init_files = {
+ .count = ATOMIC_INIT(1),
+ .fdt = &init_files.fdtab,
+ .fdtab = {
+ .max_fds = NR_OPEN_DEFAULT,
+ .fd = &init_files.fd_array[0],
+ .close_on_exec = (fd_set *)&init_files.close_on_exec_init,
+ .open_fds = (fd_set *)&init_files.open_fds_init,
+ .rcu = RCU_HEAD_INIT,
+ },
+ .file_lock = __SPIN_LOCK_UNLOCKED(init_task.file_lock),
+};
diff --git a/fs/fuse/file.c b/fs/fuse/file.c
index f28cf8b..8092f0d 100644
--- a/fs/fuse/file.c
+++ b/fs/fuse/file.c
@@ -804,6 +804,8 @@
if (offset == PAGE_CACHE_SIZE)
offset = 0;
+ if (!fc->big_writes)
+ break;
} while (iov_iter_count(ii) && count < fc->max_write &&
req->num_pages < FUSE_MAX_PAGES_PER_REQ && offset == 0);
diff --git a/fs/fuse/fuse_i.h b/fs/fuse/fuse_i.h
index dadffa2..bae9486 100644
--- a/fs/fuse/fuse_i.h
+++ b/fs/fuse/fuse_i.h
@@ -404,6 +404,9 @@
/** Is bmap not implemented by fs? */
unsigned no_bmap : 1;
+ /** Do multi-page cached writes */
+ unsigned big_writes : 1;
+
/** The number of requests waiting for completion */
atomic_t num_waiting;
diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c
index 79b6158..43e9951 100644
--- a/fs/fuse/inode.c
+++ b/fs/fuse/inode.c
@@ -488,7 +488,12 @@
err = bdi_init(&fc->bdi);
if (err)
goto error_kfree;
- err = bdi_register_dev(&fc->bdi, fc->dev);
+ if (sb->s_bdev) {
+ err = bdi_register(&fc->bdi, NULL, "%u:%u-fuseblk",
+ MAJOR(fc->dev), MINOR(fc->dev));
+ } else {
+ err = bdi_register_dev(&fc->bdi, fc->dev);
+ }
if (err)
goto error_bdi_destroy;
/*
@@ -576,6 +581,8 @@
fc->no_lock = 1;
if (arg->flags & FUSE_ATOMIC_O_TRUNC)
fc->atomic_o_trunc = 1;
+ if (arg->flags & FUSE_BIG_WRITES)
+ fc->big_writes = 1;
} else {
ra_pages = fc->max_read / PAGE_CACHE_SIZE;
fc->no_lock = 1;
@@ -599,7 +606,8 @@
arg->major = FUSE_KERNEL_VERSION;
arg->minor = FUSE_KERNEL_MINOR_VERSION;
arg->max_readahead = fc->bdi.ra_pages * PAGE_CACHE_SIZE;
- arg->flags |= FUSE_ASYNC_READ | FUSE_POSIX_LOCKS | FUSE_ATOMIC_O_TRUNC;
+ arg->flags |= FUSE_ASYNC_READ | FUSE_POSIX_LOCKS | FUSE_ATOMIC_O_TRUNC |
+ FUSE_BIG_WRITES;
req->in.h.opcode = FUSE_INIT;
req->in.numargs = 1;
req->in.args[0].size = sizeof(*arg);
diff --git a/fs/gfs2/glops.c b/fs/gfs2/glops.c
index d31bada..07d84d16 100644
--- a/fs/gfs2/glops.c
+++ b/fs/gfs2/glops.c
@@ -249,7 +249,7 @@
struct gfs2_inode *ip = gl->gl_object;
int error = 0;
- if (!ip)
+ if (!ip || (gh->gh_flags & GL_SKIP))
return 0;
if (test_bit(GIF_INVALID, &ip->i_flags)) {
diff --git a/fs/gfs2/incore.h b/fs/gfs2/incore.h
index 9c2c0b9..eabe5ea 100644
--- a/fs/gfs2/incore.h
+++ b/fs/gfs2/incore.h
@@ -236,6 +236,7 @@
GIF_INVALID = 0,
GIF_QD_LOCKED = 1,
GIF_SW_PAGED = 3,
+ GIF_USER = 4, /* user inode, not metadata addr space */
};
struct gfs2_dinode_host {
diff --git a/fs/gfs2/inode.c b/fs/gfs2/inode.c
index 3a9ef52..09453d0 100644
--- a/fs/gfs2/inode.c
+++ b/fs/gfs2/inode.c
@@ -47,8 +47,7 @@
struct gfs2_inode *ip = GFS2_I(inode);
u64 *no_addr = opaque;
- if (ip->i_no_addr == *no_addr &&
- inode->i_private != NULL)
+ if (ip->i_no_addr == *no_addr && test_bit(GIF_USER, &ip->i_flags))
return 1;
return 0;
@@ -61,6 +60,7 @@
inode->i_ino = (unsigned long)*no_addr;
ip->i_no_addr = *no_addr;
+ set_bit(GIF_USER, &ip->i_flags);
return 0;
}
@@ -86,7 +86,7 @@
struct gfs2_inode *ip = GFS2_I(inode);
struct gfs2_skip_data *data = opaque;
- if (ip->i_no_addr == data->no_addr && inode->i_private != NULL){
+ if (ip->i_no_addr == data->no_addr && test_bit(GIF_USER, &ip->i_flags)){
if (inode->i_state & (I_FREEING|I_CLEAR|I_WILL_FREE)){
data->skipped = 1;
return 0;
@@ -105,6 +105,7 @@
return 1;
inode->i_ino = (unsigned long)(data->no_addr);
ip->i_no_addr = data->no_addr;
+ set_bit(GIF_USER, &ip->i_flags);
return 0;
}
@@ -166,7 +167,7 @@
* Returns: A VFS inode, or an error
*/
-struct inode *gfs2_inode_lookup(struct super_block *sb,
+struct inode *gfs2_inode_lookup(struct super_block *sb,
unsigned int type,
u64 no_addr,
u64 no_formal_ino, int skip_freeing)
@@ -187,7 +188,6 @@
if (inode->i_state & I_NEW) {
struct gfs2_sbd *sdp = GFS2_SB(inode);
- inode->i_private = ip;
ip->i_no_formal_ino = no_formal_ino;
error = gfs2_glock_get(sdp, no_addr, &gfs2_inode_glops, CREATE, &ip->i_gl);
diff --git a/fs/gfs2/meta_io.c b/fs/gfs2/meta_io.c
index 85aea27..78d75f8 100644
--- a/fs/gfs2/meta_io.c
+++ b/fs/gfs2/meta_io.c
@@ -1,6 +1,6 @@
/*
* Copyright (C) Sistina Software, Inc. 1997-2003 All rights reserved.
- * Copyright (C) 2004-2006 Red Hat, Inc. All rights reserved.
+ * Copyright (C) 2004-2008 Red Hat, Inc. All rights reserved.
*
* This copyrighted material is made available to anyone wishing to use,
* modify, copy, or redistribute it subject to the terms and conditions
@@ -69,13 +69,15 @@
struct inode *gfs2_aspace_get(struct gfs2_sbd *sdp)
{
struct inode *aspace;
+ struct gfs2_inode *ip;
aspace = new_inode(sdp->sd_vfs);
if (aspace) {
mapping_set_gfp_mask(aspace->i_mapping, GFP_NOFS);
aspace->i_mapping->a_ops = &aspace_aops;
aspace->i_size = ~0ULL;
- aspace->i_private = NULL;
+ ip = GFS2_I(aspace);
+ clear_bit(GIF_USER, &ip->i_flags);
insert_inode_hash(aspace);
}
return aspace;
diff --git a/fs/gfs2/ops_fstype.c b/fs/gfs2/ops_fstype.c
index ef9c6c4..b2028c8 100644
--- a/fs/gfs2/ops_fstype.c
+++ b/fs/gfs2/ops_fstype.c
@@ -142,8 +142,8 @@
if (!table[0])
table = sdp->sd_vfs->s_id;
- snprintf(sdp->sd_proto_name, GFS2_FSNAME_LEN, "%s", proto);
- snprintf(sdp->sd_table_name, GFS2_FSNAME_LEN, "%s", table);
+ strlcpy(sdp->sd_proto_name, proto, GFS2_FSNAME_LEN);
+ strlcpy(sdp->sd_table_name, table, GFS2_FSNAME_LEN);
table = sdp->sd_table_name;
while ((table = strchr(table, '/')))
diff --git a/fs/gfs2/ops_super.c b/fs/gfs2/ops_super.c
index 2278c68..0b7cc92 100644
--- a/fs/gfs2/ops_super.c
+++ b/fs/gfs2/ops_super.c
@@ -1,6 +1,6 @@
/*
* Copyright (C) Sistina Software, Inc. 1997-2003 All rights reserved.
- * Copyright (C) 2004-2006 Red Hat, Inc. All rights reserved.
+ * Copyright (C) 2004-2008 Red Hat, Inc. All rights reserved.
*
* This copyrighted material is made available to anyone wishing to use,
* modify, copy, or redistribute it subject to the terms and conditions
@@ -52,7 +52,7 @@
struct gfs2_inode *ip = GFS2_I(inode);
/* Check this is a "normal" inode */
- if (inode->i_private) {
+ if (test_bit(GIF_USER, &ip->i_flags)) {
if (current->flags & PF_MEMALLOC)
return 0;
if (sync)
@@ -297,8 +297,9 @@
*/
static void gfs2_drop_inode(struct inode *inode)
{
- if (inode->i_private && inode->i_nlink) {
- struct gfs2_inode *ip = GFS2_I(inode);
+ struct gfs2_inode *ip = GFS2_I(inode);
+
+ if (test_bit(GIF_USER, &ip->i_flags) && inode->i_nlink) {
struct gfs2_glock *gl = ip->i_iopen_gh.gh_gl;
if (gl && test_bit(GLF_DEMOTE, &gl->gl_flags))
clear_nlink(inode);
@@ -314,12 +315,13 @@
static void gfs2_clear_inode(struct inode *inode)
{
+ struct gfs2_inode *ip = GFS2_I(inode);
+
/* This tells us its a "real" inode and not one which only
* serves to contain an address space (see rgrp.c, meta_io.c)
* which therefore doesn't have its own glocks.
*/
- if (inode->i_private) {
- struct gfs2_inode *ip = GFS2_I(inode);
+ if (test_bit(GIF_USER, &ip->i_flags)) {
ip->i_gl->gl_object = NULL;
gfs2_glock_schedule_for_reclaim(ip->i_gl);
gfs2_glock_put(ip->i_gl);
@@ -419,7 +421,7 @@
struct gfs2_holder gh;
int error;
- if (!inode->i_private)
+ if (!test_bit(GIF_USER, &ip->i_flags))
goto out;
error = gfs2_glock_nq_init(ip->i_gl, LM_ST_EXCLUSIVE, 0, &gh);
diff --git a/fs/gfs2/rgrp.c b/fs/gfs2/rgrp.c
index 7e8f0b1..6387523 100644
--- a/fs/gfs2/rgrp.c
+++ b/fs/gfs2/rgrp.c
@@ -1495,7 +1495,7 @@
al->al_alloced += *n;
- gfs2_statfs_change(sdp, 0, -*n, 0);
+ gfs2_statfs_change(sdp, 0, -(s64)*n, 0);
gfs2_quota_change(ip, *n, ip->i_inode.i_uid, ip->i_inode.i_gid);
spin_lock(&sdp->sd_rindex_spin);
diff --git a/fs/hfsplus/inode.c b/fs/hfsplus/inode.c
index d53b2af..67e1c8b 100644
--- a/fs/hfsplus/inode.c
+++ b/fs/hfsplus/inode.c
@@ -65,6 +65,8 @@
BUG();
return 0;
}
+ if (!tree)
+ return 0;
if (tree->node_size >= PAGE_CACHE_SIZE) {
nidx = page->index >> (tree->node_size_shift - PAGE_CACHE_SHIFT);
spin_lock(&tree->hash_lock);
diff --git a/fs/hppfs/Makefile b/fs/hppfs/Makefile
index 6890433..3a982bd 100644
--- a/fs/hppfs/Makefile
+++ b/fs/hppfs/Makefile
@@ -1,9 +1,6 @@
#
-# Copyright (C) 2002, 2003 Jeff Dike (jdike@karaya.com)
+# Copyright (C) 2002 - 2008 Jeff Dike (jdike@{addtoit,linux.intel}.com)
# Licensed under the GPL
#
-hppfs-objs := hppfs_kern.o
-
-obj-y =
obj-$(CONFIG_HPPFS) += hppfs.o
diff --git a/fs/hppfs/hppfs_kern.c b/fs/hppfs/hppfs.c
similarity index 91%
rename from fs/hppfs/hppfs_kern.c
rename to fs/hppfs/hppfs.c
index 8601d8e..65077aa 100644
--- a/fs/hppfs/hppfs_kern.c
+++ b/fs/hppfs/hppfs.c
@@ -33,7 +33,7 @@
};
struct hppfs_inode_info {
- struct dentry *proc_dentry;
+ struct dentry *proc_dentry;
struct inode vfs_inode;
};
@@ -52,7 +52,7 @@
int i;
sb = dentry->d_sb;
- if ((sb->s_op != &hppfs_sbops) || (dentry->d_parent != sb->s_root))
+ if (dentry->d_parent != sb->s_root)
return 0;
for (i = 0; i < dentry->d_name.len; i++) {
@@ -136,7 +136,7 @@
}
static struct dentry *hppfs_lookup(struct inode *ino, struct dentry *dentry,
- struct nameidata *nd)
+ struct nameidata *nd)
{
struct dentry *proc_dentry, *new, *parent;
struct inode *inode;
@@ -254,6 +254,8 @@
int err;
if (hppfs->contents != NULL) {
+ int rem;
+
if (*ppos >= hppfs->len)
return 0;
@@ -267,8 +269,10 @@
if (off + count > hppfs->len)
count = hppfs->len - off;
- copy_to_user(buf, &data->contents[off], count);
- *ppos += count;
+ rem = copy_to_user(buf, &data->contents[off], count);
+ *ppos += count - rem;
+ if (rem > 0)
+ return -EFAULT;
} else if (hppfs->host_fd != -1) {
err = os_seek_file(hppfs->host_fd, *ppos);
if (err) {
@@ -285,21 +289,15 @@
return count;
}
-static ssize_t hppfs_write(struct file *file, const char __user *buf, size_t len,
- loff_t *ppos)
+static ssize_t hppfs_write(struct file *file, const char __user *buf,
+ size_t len, loff_t *ppos)
{
struct hppfs_private *data = file->private_data;
struct file *proc_file = data->proc_file;
ssize_t (*write)(struct file *, const char __user *, size_t, loff_t *);
- int err;
write = proc_file->f_path.dentry->d_inode->i_fop->write;
-
- proc_file->f_pos = file->f_pos;
- err = (*write)(proc_file, buf, len, &proc_file->f_pos);
- file->f_pos = proc_file->f_pos;
-
- return err;
+ return (*write)(proc_file, buf, len, ppos);
}
static int open_host_sock(char *host_file, int *filter_out)
@@ -357,7 +355,7 @@
if (filter) {
while ((n = read_proc(proc_file, data->contents,
- sizeof(data->contents), NULL, 0)) > 0)
+ sizeof(data->contents), NULL, 0)) > 0)
os_write_file(fd, data->contents, n);
err = os_shutdown_socket(fd, 0, 1);
if (err) {
@@ -429,8 +427,8 @@
static int hppfs_open(struct inode *inode, struct file *file)
{
struct hppfs_private *data;
- struct dentry *proc_dentry;
struct vfsmount *proc_mnt;
+ struct dentry *proc_dentry;
char *host_file;
int err, fd, type, filter;
@@ -492,8 +490,8 @@
static int hppfs_dir_open(struct inode *inode, struct file *file)
{
struct hppfs_private *data;
- struct dentry *proc_dentry;
struct vfsmount *proc_mnt;
+ struct dentry *proc_dentry;
int err;
err = -ENOMEM;
@@ -620,6 +618,9 @@
void hppfs_delete_inode(struct inode *ino)
{
+ dput(HPPFS_I(ino)->proc_dentry);
+ mntput(ino->i_sb->s_fs_info);
+
clear_inode(ino);
}
@@ -628,69 +629,46 @@
kfree(HPPFS_I(inode));
}
-static void hppfs_put_super(struct super_block *sb)
-{
- mntput(sb->s_fs_info);
-}
-
static const struct super_operations hppfs_sbops = {
.alloc_inode = hppfs_alloc_inode,
.destroy_inode = hppfs_destroy_inode,
.delete_inode = hppfs_delete_inode,
.statfs = hppfs_statfs,
- .put_super = hppfs_put_super,
};
static int hppfs_readlink(struct dentry *dentry, char __user *buffer,
int buflen)
{
- struct file *proc_file;
struct dentry *proc_dentry;
- struct vfsmount *proc_mnt;
- int ret;
proc_dentry = HPPFS_I(dentry->d_inode)->proc_dentry;
- proc_mnt = dentry->d_sb->s_fs_info;
-
- proc_file = dentry_open(dget(proc_dentry), mntget(proc_mnt), O_RDONLY);
- if (IS_ERR(proc_file))
- return PTR_ERR(proc_file);
-
- ret = proc_dentry->d_inode->i_op->readlink(proc_dentry, buffer, buflen);
-
- fput(proc_file);
-
- return ret;
+ return proc_dentry->d_inode->i_op->readlink(proc_dentry, buffer,
+ buflen);
}
-static void* hppfs_follow_link(struct dentry *dentry, struct nameidata *nd)
+static void *hppfs_follow_link(struct dentry *dentry, struct nameidata *nd)
{
- struct file *proc_file;
struct dentry *proc_dentry;
- struct vfsmount *proc_mnt;
- void *ret;
proc_dentry = HPPFS_I(dentry->d_inode)->proc_dentry;
- proc_mnt = dentry->d_sb->s_fs_info;
- proc_file = dentry_open(dget(proc_dentry), mntget(proc_mnt), O_RDONLY);
- if (IS_ERR(proc_file))
- return proc_file;
+ return proc_dentry->d_inode->i_op->follow_link(proc_dentry, nd);
+}
- ret = proc_dentry->d_inode->i_op->follow_link(proc_dentry, nd);
-
- fput(proc_file);
-
- return ret;
+int hppfs_permission(struct inode *inode, int mask, struct nameidata *nd)
+{
+ return generic_permission(inode, mask, NULL);
}
static const struct inode_operations hppfs_dir_iops = {
.lookup = hppfs_lookup,
+ .permission = hppfs_permission,
};
static const struct inode_operations hppfs_link_iops = {
.readlink = hppfs_readlink,
.follow_link = hppfs_follow_link,
+ .permission = hppfs_permission,
};
static struct inode *get_inode(struct super_block *sb, struct dentry *dentry)
@@ -712,7 +690,7 @@
inode->i_fop = &hppfs_file_fops;
}
- HPPFS_I(inode)->proc_dentry = dentry;
+ HPPFS_I(inode)->proc_dentry = dget(dentry);
inode->i_uid = proc_ino->i_uid;
inode->i_gid = proc_ino->i_gid;
@@ -725,7 +703,7 @@
inode->i_size = proc_ino->i_size;
inode->i_blocks = proc_ino->i_blocks;
- return 0;
+ return inode;
}
static int hppfs_fill_super(struct super_block *sb, void *d, int silent)
diff --git a/fs/jbd/commit.c b/fs/jbd/commit.c
index cd931ef..5a8ca61 100644
--- a/fs/jbd/commit.c
+++ b/fs/jbd/commit.c
@@ -470,7 +470,9 @@
* transaction! Now comes the tricky part: we need to write out
* metadata. Loop over the transaction's entire buffer list:
*/
+ spin_lock(&journal->j_state_lock);
commit_transaction->t_state = T_COMMIT;
+ spin_unlock(&journal->j_state_lock);
J_ASSERT(commit_transaction->t_nr_buffers <=
commit_transaction->t_outstanding_credits);
diff --git a/fs/jbd2/commit.c b/fs/jbd2/commit.c
index e013978..a2ed72f 100644
--- a/fs/jbd2/commit.c
+++ b/fs/jbd2/commit.c
@@ -168,6 +168,7 @@
spin_unlock(&journal->j_state_lock);
/* And try again, without the barrier */
+ lock_buffer(bh);
set_buffer_uptodate(bh);
set_buffer_dirty(bh);
ret = submit_bh(WRITE, bh);
@@ -560,7 +561,9 @@
* transaction! Now comes the tricky part: we need to write out
* metadata. Loop over the transaction's entire buffer list:
*/
+ spin_lock(&journal->j_state_lock);
commit_transaction->t_state = T_COMMIT;
+ spin_unlock(&journal->j_state_lock);
stats.u.run.rs_logging = jiffies;
stats.u.run.rs_flushing = jbd2_time_diff(stats.u.run.rs_flushing,
diff --git a/fs/jbd2/journal.c b/fs/jbd2/journal.c
index 53632e3..2e24567 100644
--- a/fs/jbd2/journal.c
+++ b/fs/jbd2/journal.c
@@ -901,7 +901,7 @@
{
char name[BDEVNAME_SIZE];
- snprintf(name, sizeof(name) - 1, "%s", bdevname(journal->j_dev, name));
+ bdevname(journal->j_dev, name);
journal->j_proc_entry = proc_mkdir(name, proc_jbd2_stats);
if (journal->j_proc_entry) {
proc_create_data("history", S_IRUGO, journal->j_proc_entry,
@@ -915,7 +915,7 @@
{
char name[BDEVNAME_SIZE];
- snprintf(name, sizeof(name) - 1, "%s", bdevname(journal->j_dev, name));
+ bdevname(journal->j_dev, name);
remove_proc_entry("info", journal->j_proc_entry);
remove_proc_entry("history", journal->j_proc_entry);
remove_proc_entry(name, proc_jbd2_stats);
diff --git a/fs/jbd2/recovery.c b/fs/jbd2/recovery.c
index 5d0405a..058f50f 100644
--- a/fs/jbd2/recovery.c
+++ b/fs/jbd2/recovery.c
@@ -344,6 +344,7 @@
*crc32_sum = crc32_be(*crc32_sum, (void *)obh->b_data,
obh->b_size);
}
+ put_bh(obh);
}
return 0;
}
@@ -610,9 +611,8 @@
chksum_err = chksum_seen = 0;
if (info->end_transaction) {
- printk(KERN_ERR "JBD: Transaction %u "
- "found to be corrupt.\n",
- next_commit_ID - 1);
+ journal->j_failed_commit =
+ info->end_transaction;
brelse(bh);
break;
}
@@ -643,10 +643,8 @@
if (!JBD2_HAS_INCOMPAT_FEATURE(journal,
JBD2_FEATURE_INCOMPAT_ASYNC_COMMIT)){
- printk(KERN_ERR
- "JBD: Transaction %u "
- "found to be corrupt.\n",
- next_commit_ID);
+ journal->j_failed_commit =
+ next_commit_ID;
brelse(bh);
break;
}
diff --git a/fs/libfs.c b/fs/libfs.c
index b004dfa..892d41c 100644
--- a/fs/libfs.c
+++ b/fs/libfs.c
@@ -528,6 +528,23 @@
return count;
}
+ssize_t memory_read_from_buffer(void *to, size_t count, loff_t *ppos,
+ const void *from, size_t available)
+{
+ loff_t pos = *ppos;
+
+ if (pos < 0)
+ return -EINVAL;
+ if (pos >= available)
+ return 0;
+ if (count > available - pos)
+ count = available - pos;
+ memcpy(to, from + pos, count);
+ *ppos = pos + count;
+
+ return count;
+}
+
/*
* Transaction based IO.
* The file expects a single write which triggers the transaction, and then
@@ -800,6 +817,7 @@
EXPORT_SYMBOL(simple_sync_file);
EXPORT_SYMBOL(simple_unlink);
EXPORT_SYMBOL(simple_read_from_buffer);
+EXPORT_SYMBOL(memory_read_from_buffer);
EXPORT_SYMBOL(simple_transaction_get);
EXPORT_SYMBOL(simple_transaction_read);
EXPORT_SYMBOL(simple_transaction_release);
diff --git a/fs/namei.c b/fs/namei.c
index 32fd965..c7e4353 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -2003,18 +2003,22 @@
if (IS_ERR(dentry))
goto fail;
+ if (dentry->d_inode)
+ goto eexist;
/*
* Special case - lookup gave negative, but... we had foo/bar/
* From the vfs_mknod() POV we just have a negative dentry -
* all is fine. Let's be bastards - you had / on the end, you've
* been asking for (non-existent) directory. -ENOENT for you.
*/
- if (!is_dir && nd->last.name[nd->last.len] && !dentry->d_inode)
- goto enoent;
+ if (unlikely(!is_dir && nd->last.name[nd->last.len])) {
+ dput(dentry);
+ dentry = ERR_PTR(-ENOENT);
+ }
return dentry;
-enoent:
+eexist:
dput(dentry);
- dentry = ERR_PTR(-ENOENT);
+ dentry = ERR_PTR(-EEXIST);
fail:
return dentry;
}
diff --git a/fs/nfs/callback.c b/fs/nfs/callback.c
index 5606ae3..c1e7c83 100644
--- a/fs/nfs/callback.c
+++ b/fs/nfs/callback.c
@@ -182,7 +182,7 @@
if (clp == NULL)
return SVC_DROP;
- dprintk("%s: %s NFSv4 callback!\n", __FUNCTION__,
+ dprintk("%s: %s NFSv4 callback!\n", __func__,
svc_print_addr(rqstp, buf, sizeof(buf)));
nfs_put_client(clp);
diff --git a/fs/nfs/callback_proc.c b/fs/nfs/callback_proc.c
index 15f7785..f7e83e2 100644
--- a/fs/nfs/callback_proc.c
+++ b/fs/nfs/callback_proc.c
@@ -57,7 +57,7 @@
out_putclient:
nfs_put_client(clp);
out:
- dprintk("%s: exit with status = %d\n", __FUNCTION__, ntohl(res->status));
+ dprintk("%s: exit with status = %d\n", __func__, ntohl(res->status));
return res->status;
}
@@ -98,6 +98,6 @@
nfs_put_client(prev);
} while (clp != NULL);
out:
- dprintk("%s: exit with status = %d\n", __FUNCTION__, ntohl(res));
+ dprintk("%s: exit with status = %d\n", __func__, ntohl(res));
return res;
}
diff --git a/fs/nfs/callback_xdr.c b/fs/nfs/callback_xdr.c
index 13619d2..dd0ef34 100644
--- a/fs/nfs/callback_xdr.c
+++ b/fs/nfs/callback_xdr.c
@@ -141,7 +141,7 @@
/* We do not like overly long tags! */
if (hdr->taglen > CB_OP_TAGLEN_MAXSZ - 12) {
printk("NFSv4 CALLBACK %s: client sent tag of length %u\n",
- __FUNCTION__, hdr->taglen);
+ __func__, hdr->taglen);
return htonl(NFS4ERR_RESOURCE);
}
p = read_buf(xdr, 12);
@@ -151,7 +151,7 @@
/* Check minor version is zero. */
if (minor_version != 0) {
printk(KERN_WARNING "%s: NFSv4 server callback with illegal minor version %u!\n",
- __FUNCTION__, minor_version);
+ __func__, minor_version);
return htonl(NFS4ERR_MINOR_VERS_MISMATCH);
}
hdr->callback_ident = ntohl(*p++);
@@ -179,7 +179,7 @@
args->addr = svc_addr(rqstp);
status = decode_bitmap(xdr, args->bitmap);
out:
- dprintk("%s: exit with status = %d\n", __FUNCTION__, ntohl(status));
+ dprintk("%s: exit with status = %d\n", __func__, ntohl(status));
return status;
}
@@ -200,7 +200,7 @@
args->truncate = ntohl(*p);
status = decode_fh(xdr, &args->fh);
out:
- dprintk("%s: exit with status = %d\n", __FUNCTION__, ntohl(status));
+ dprintk("%s: exit with status = %d\n", __func__, ntohl(status));
return status;
}
@@ -349,7 +349,7 @@
status = encode_attr_mtime(xdr, res->bitmap, &res->mtime);
*savep = htonl((unsigned int)((char *)xdr->p - (char *)(savep+1)));
out:
- dprintk("%s: exit with status = %d\n", __FUNCTION__, ntohl(status));
+ dprintk("%s: exit with status = %d\n", __func__, ntohl(status));
return status;
}
@@ -363,7 +363,7 @@
long maxlen;
__be32 res;
- dprintk("%s: start\n", __FUNCTION__);
+ dprintk("%s: start\n", __func__);
status = decode_op_hdr(xdr_in, &op_nr);
if (likely(status == 0)) {
switch (op_nr) {
@@ -392,7 +392,7 @@
status = res;
if (op->encode_res != NULL && status == 0)
status = op->encode_res(rqstp, xdr_out, resp);
- dprintk("%s: done, status = %d\n", __FUNCTION__, ntohl(status));
+ dprintk("%s: done, status = %d\n", __func__, ntohl(status));
return status;
}
@@ -401,37 +401,37 @@
*/
static __be32 nfs4_callback_compound(struct svc_rqst *rqstp, void *argp, void *resp)
{
- struct cb_compound_hdr_arg hdr_arg;
- struct cb_compound_hdr_res hdr_res;
+ struct cb_compound_hdr_arg hdr_arg = { 0 };
+ struct cb_compound_hdr_res hdr_res = { NULL };
struct xdr_stream xdr_in, xdr_out;
__be32 *p;
__be32 status;
- unsigned int nops = 1;
+ unsigned int nops = 0;
- dprintk("%s: start\n", __FUNCTION__);
+ dprintk("%s: start\n", __func__);
xdr_init_decode(&xdr_in, &rqstp->rq_arg, rqstp->rq_arg.head[0].iov_base);
p = (__be32*)((char *)rqstp->rq_res.head[0].iov_base + rqstp->rq_res.head[0].iov_len);
xdr_init_encode(&xdr_out, &rqstp->rq_res, p);
- decode_compound_hdr_arg(&xdr_in, &hdr_arg);
+ status = decode_compound_hdr_arg(&xdr_in, &hdr_arg);
+ if (status == __constant_htonl(NFS4ERR_RESOURCE))
+ return rpc_garbage_args;
+
hdr_res.taglen = hdr_arg.taglen;
hdr_res.tag = hdr_arg.tag;
- hdr_res.nops = NULL;
- encode_compound_hdr_res(&xdr_out, &hdr_res);
+ if (encode_compound_hdr_res(&xdr_out, &hdr_res) != 0)
+ return rpc_system_err;
- for (;;) {
+ while (status == 0 && nops != hdr_arg.nops) {
status = process_op(rqstp, &xdr_in, argp, &xdr_out, resp);
- if (status != 0)
- break;
- if (nops == hdr_arg.nops)
- break;
nops++;
}
+
*hdr_res.status = status;
*hdr_res.nops = htonl(nops);
- dprintk("%s: done, status = %u\n", __FUNCTION__, ntohl(status));
+ dprintk("%s: done, status = %u\n", __func__, ntohl(status));
return rpc_success;
}
diff --git a/fs/nfs/client.c b/fs/nfs/client.c
index 89ac5bb..f2a092c 100644
--- a/fs/nfs/client.c
+++ b/fs/nfs/client.c
@@ -488,7 +488,7 @@
clnt = rpc_create(&args);
if (IS_ERR(clnt)) {
dprintk("%s: cannot create RPC client. Error = %ld\n",
- __FUNCTION__, PTR_ERR(clnt));
+ __func__, PTR_ERR(clnt));
return PTR_ERR(clnt);
}
@@ -576,7 +576,7 @@
server->client = rpc_clone_client(clp->cl_rpcclient);
if (IS_ERR(server->client)) {
- dprintk("%s: couldn't create rpc_client!\n", __FUNCTION__);
+ dprintk("%s: couldn't create rpc_client!\n", __func__);
return PTR_ERR(server->client);
}
@@ -590,7 +590,7 @@
auth = rpcauth_create(pseudoflavour, server->client);
if (IS_ERR(auth)) {
- dprintk("%s: couldn't create credcache!\n", __FUNCTION__);
+ dprintk("%s: couldn't create credcache!\n", __func__);
return PTR_ERR(auth);
}
}
@@ -985,7 +985,7 @@
error = nfs_idmap_new(clp);
if (error < 0) {
dprintk("%s: failed to create idmapper. Error = %d\n",
- __FUNCTION__, error);
+ __func__, error);
goto error;
}
__set_bit(NFS_CS_IDMAP, &clp->cl_res_state);
diff --git a/fs/nfs/delegation.c b/fs/nfs/delegation.c
index 00a5e44..cc563cf 100644
--- a/fs/nfs/delegation.c
+++ b/fs/nfs/delegation.c
@@ -60,7 +60,7 @@
switch (status) {
default:
printk(KERN_ERR "%s: unhandled error %d.\n",
- __FUNCTION__, status);
+ __func__, status);
case -NFS4ERR_EXPIRED:
/* kill_proc(fl->fl_pid, SIGLOST, 1); */
case -NFS4ERR_STALE_CLIENTID:
@@ -186,7 +186,7 @@
*/
dfprintk(FILE, "%s: server %s handed out "
"a duplicate delegation!\n",
- __FUNCTION__, clp->cl_hostname);
+ __func__, clp->cl_hostname);
if (delegation->type <= nfsi->delegation->type) {
freeme = delegation;
delegation = NULL;
diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c
index f288b3e..58d43da 100644
--- a/fs/nfs/dir.c
+++ b/fs/nfs/dir.c
@@ -180,7 +180,7 @@
int error;
dfprintk(DIRCACHE, "NFS: %s: reading cookie %Lu into page %lu\n",
- __FUNCTION__, (long long)desc->entry->cookie,
+ __func__, (long long)desc->entry->cookie,
page->index);
again:
@@ -256,7 +256,7 @@
while((status = dir_decode(desc)) == 0) {
dfprintk(DIRCACHE, "NFS: %s: examining cookie %Lu\n",
- __FUNCTION__, (unsigned long long)entry->cookie);
+ __func__, (unsigned long long)entry->cookie);
if (entry->prev_cookie == *desc->dir_cookie)
break;
if (loop_count++ > 200) {
@@ -315,7 +315,7 @@
int status;
dfprintk(DIRCACHE, "NFS: %s: searching page %ld for target %Lu\n",
- __FUNCTION__, desc->page_index,
+ __func__, desc->page_index,
(long long) *desc->dir_cookie);
/* If we find the page in the page_cache, we cannot be sure
@@ -339,7 +339,7 @@
if (status < 0)
dir_page_release(desc);
out:
- dfprintk(DIRCACHE, "NFS: %s: returns %d\n", __FUNCTION__, status);
+ dfprintk(DIRCACHE, "NFS: %s: returns %d\n", __func__, status);
return status;
}
@@ -380,7 +380,7 @@
}
}
- dfprintk(DIRCACHE, "NFS: %s: returns %d\n", __FUNCTION__, res);
+ dfprintk(DIRCACHE, "NFS: %s: returns %d\n", __func__, res);
return res;
}
@@ -506,7 +506,7 @@
desc->entry->eof = 0;
out:
dfprintk(DIRCACHE, "NFS: %s: returns %d\n",
- __FUNCTION__, status);
+ __func__, status);
return status;
out_release:
dir_page_release(desc);
@@ -780,7 +780,7 @@
if (is_bad_inode(inode)) {
dfprintk(LOOKUPCACHE, "%s: %s/%s has dud inode\n",
- __FUNCTION__, dentry->d_parent->d_name.name,
+ __func__, dentry->d_parent->d_name.name,
dentry->d_name.name);
goto out_bad;
}
@@ -808,7 +808,7 @@
unlock_kernel();
dput(parent);
dfprintk(LOOKUPCACHE, "NFS: %s(%s/%s) is valid\n",
- __FUNCTION__, dentry->d_parent->d_name.name,
+ __func__, dentry->d_parent->d_name.name,
dentry->d_name.name);
return 1;
out_zap_parent:
@@ -827,7 +827,7 @@
unlock_kernel();
dput(parent);
dfprintk(LOOKUPCACHE, "NFS: %s(%s/%s) is invalid\n",
- __FUNCTION__, dentry->d_parent->d_name.name,
+ __func__, dentry->d_parent->d_name.name,
dentry->d_name.name);
return 0;
}
diff --git a/fs/nfs/file.c b/fs/nfs/file.c
index 3536b01..d84a3d8 100644
--- a/fs/nfs/file.c
+++ b/fs/nfs/file.c
@@ -526,7 +526,7 @@
if (res < 0)
dprintk(KERN_WARNING "%s: VFS is out of sync with lock manager"
" - error %d!\n",
- __FUNCTION__, res);
+ __func__, res);
return res;
}
diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c
index 5cb3345..596c5d8 100644
--- a/fs/nfs/inode.c
+++ b/fs/nfs/inode.c
@@ -541,8 +541,7 @@
}
if (ctx->cred != NULL)
put_rpccred(ctx->cred);
- dput(ctx->path.dentry);
- mntput(ctx->path.mnt);
+ path_put(&ctx->path);
kfree(ctx);
}
@@ -707,6 +706,13 @@
if (nfs_have_delegation(inode, FMODE_READ))
return 0;
+ /*
+ * Special case: if the attribute timeout is set to 0, then always
+ * treat the cache as having expired (unless holding
+ * a delegation).
+ */
+ if (nfsi->attrtimeo == 0)
+ return 1;
return !time_in_range(jiffies, nfsi->read_cache_jiffies, nfsi->read_cache_jiffies + nfsi->attrtimeo);
}
@@ -995,7 +1001,7 @@
unsigned long now = jiffies;
dfprintk(VFS, "NFS: %s(%s/%ld ct=%d info=0x%x)\n",
- __FUNCTION__, inode->i_sb->s_id, inode->i_ino,
+ __func__, inode->i_sb->s_id, inode->i_ino,
atomic_read(&inode->i_count), fattr->valid);
if (nfsi->fileid != fattr->fileid)
@@ -1119,7 +1125,7 @@
* Big trouble! The inode has become a different object.
*/
printk(KERN_DEBUG "%s: inode %ld mode changed, %07o to %07o\n",
- __FUNCTION__, inode->i_ino, inode->i_mode, fattr->mode);
+ __func__, inode->i_ino, inode->i_mode, fattr->mode);
out_err:
/*
* No need to worry about unhashing the dentry, as the
diff --git a/fs/nfs/namespace.c b/fs/nfs/namespace.c
index af4d0f1..2f285ef 100644
--- a/fs/nfs/namespace.c
+++ b/fs/nfs/namespace.c
@@ -106,7 +106,7 @@
dprintk("--> nfs_follow_mountpoint()\n");
BUG_ON(IS_ROOT(dentry));
- dprintk("%s: enter\n", __FUNCTION__);
+ dprintk("%s: enter\n", __func__);
dput(nd->path.dentry);
nd->path.dentry = dget(dentry);
@@ -137,13 +137,12 @@
goto out_follow;
goto out_err;
}
- mntput(nd->path.mnt);
- dput(nd->path.dentry);
+ path_put(&nd->path);
nd->path.mnt = mnt;
nd->path.dentry = dget(mnt->mnt_root);
schedule_delayed_work(&nfs_automount_task, nfs_mountpoint_expiry_timeout);
out:
- dprintk("%s: done, returned %d\n", __FUNCTION__, err);
+ dprintk("%s: done, returned %d\n", __func__, err);
dprintk("<-- nfs_follow_mountpoint() = %d\n", err);
return ERR_PTR(err);
@@ -230,7 +229,7 @@
dprintk("--> nfs_do_submount()\n");
- dprintk("%s: submounting on %s/%s\n", __FUNCTION__,
+ dprintk("%s: submounting on %s/%s\n", __func__,
dentry->d_parent->d_name.name,
dentry->d_name.name);
if (page == NULL)
@@ -243,7 +242,7 @@
free_page:
free_page((unsigned long)page);
out:
- dprintk("%s: done\n", __FUNCTION__);
+ dprintk("%s: done\n", __func__);
dprintk("<-- nfs_do_submount() = %p\n", mnt);
return mnt;
diff --git a/fs/nfs/nfs3proc.c b/fs/nfs/nfs3proc.c
index 549dbce..c3523ad 100644
--- a/fs/nfs/nfs3proc.c
+++ b/fs/nfs/nfs3proc.c
@@ -63,15 +63,15 @@
};
int status;
- dprintk("%s: call fsinfo\n", __FUNCTION__);
+ dprintk("%s: call fsinfo\n", __func__);
nfs_fattr_init(info->fattr);
status = rpc_call_sync(client, &msg, 0);
- dprintk("%s: reply fsinfo: %d\n", __FUNCTION__, status);
+ dprintk("%s: reply fsinfo: %d\n", __func__, status);
if (!(info->fattr->valid & NFS_ATTR_FATTR)) {
msg.rpc_proc = &nfs3_procedures[NFS3PROC_GETATTR];
msg.rpc_resp = info->fattr;
status = rpc_call_sync(client, &msg, 0);
- dprintk("%s: reply getattr: %d\n", __FUNCTION__, status);
+ dprintk("%s: reply getattr: %d\n", __func__, status);
}
return status;
}
diff --git a/fs/nfs/nfs4_fs.h b/fs/nfs/nfs4_fs.h
index bd1b9d6..ea79064 100644
--- a/fs/nfs/nfs4_fs.h
+++ b/fs/nfs/nfs4_fs.h
@@ -206,7 +206,6 @@
extern struct nfs4_state_owner * nfs4_get_state_owner(struct nfs_server *, struct rpc_cred *);
extern void nfs4_put_state_owner(struct nfs4_state_owner *);
-extern void nfs4_drop_state_owner(struct nfs4_state_owner *);
extern struct nfs4_state * nfs4_get_open_state(struct inode *, struct nfs4_state_owner *);
extern void nfs4_put_open_state(struct nfs4_state *);
extern void nfs4_close_state(struct path *, struct nfs4_state *, mode_t);
diff --git a/fs/nfs/nfs4namespace.c b/fs/nfs/nfs4namespace.c
index 5f9ba41..b112857 100644
--- a/fs/nfs/nfs4namespace.c
+++ b/fs/nfs/nfs4namespace.c
@@ -86,7 +86,7 @@
if (strncmp(path, fs_path, strlen(fs_path)) != 0) {
dprintk("%s: path %s does not begin with fsroot %s\n",
- __FUNCTION__, path, fs_path);
+ __func__, path, fs_path);
return -ENOENT;
}
@@ -134,7 +134,7 @@
if (locations == NULL || locations->nlocations <= 0)
goto out;
- dprintk("%s: referral at %s/%s\n", __FUNCTION__,
+ dprintk("%s: referral at %s/%s\n", __func__,
dentry->d_parent->d_name.name, dentry->d_name.name);
page = (char *) __get_free_page(GFP_USER);
@@ -204,7 +204,7 @@
out:
free_page((unsigned long) page);
free_page((unsigned long) page2);
- dprintk("%s: done\n", __FUNCTION__);
+ dprintk("%s: done\n", __func__);
return mnt;
}
@@ -223,7 +223,7 @@
int err;
/* BUG_ON(IS_ROOT(dentry)); */
- dprintk("%s: enter\n", __FUNCTION__);
+ dprintk("%s: enter\n", __func__);
page = alloc_page(GFP_KERNEL);
if (page == NULL)
@@ -238,7 +238,7 @@
parent = dget_parent(dentry);
dprintk("%s: getting locations for %s/%s\n",
- __FUNCTION__, parent->d_name.name, dentry->d_name.name);
+ __func__, parent->d_name.name, dentry->d_name.name);
err = nfs4_proc_fs_locations(parent->d_inode, &dentry->d_name, fs_locations, page);
dput(parent);
@@ -252,6 +252,6 @@
__free_page(page);
kfree(fs_locations);
out:
- dprintk("%s: done\n", __FUNCTION__);
+ dprintk("%s: done\n", __func__);
return mnt;
}
diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c
index dbc0927..1293e0a 100644
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -73,7 +73,7 @@
{
if (err < -1000) {
dprintk("%s could not handle NFSv4 error %d\n",
- __FUNCTION__, -err);
+ __func__, -err);
return -EIO;
}
return err;
@@ -306,8 +306,7 @@
nfs4_put_open_state(p->state);
nfs4_put_state_owner(p->owner);
dput(p->dir);
- dput(p->path.dentry);
- mntput(p->path.mnt);
+ path_put(&p->path);
kfree(p);
}
@@ -1210,8 +1209,7 @@
nfs4_put_open_state(calldata->state);
nfs_free_seqid(calldata->arg.seqid);
nfs4_put_state_owner(sp);
- dput(calldata->path.dentry);
- mntput(calldata->path.mnt);
+ path_put(&calldata->path);
kfree(calldata);
}
@@ -1578,7 +1576,7 @@
goto out;
/* Make sure server returned a different fsid for the referral */
if (nfs_fsid_equal(&NFS_SERVER(dir)->fsid, &locations->fattr.fsid)) {
- dprintk("%s: server did not return a different fsid for a referral at %s\n", __FUNCTION__, name->name);
+ dprintk("%s: server did not return a different fsid for a referral at %s\n", __func__, name->name);
status = -EIO;
goto out;
}
@@ -2211,7 +2209,7 @@
};
int status;
- dprintk("%s: dentry = %s/%s, cookie = %Lu\n", __FUNCTION__,
+ dprintk("%s: dentry = %s/%s, cookie = %Lu\n", __func__,
dentry->d_parent->d_name.name,
dentry->d_name.name,
(unsigned long long)cookie);
@@ -2223,7 +2221,7 @@
nfs_invalidate_atime(dir);
- dprintk("%s: returns %d\n", __FUNCTION__, status);
+ dprintk("%s: returns %d\n", __func__, status);
return status;
}
@@ -3342,7 +3340,7 @@
struct nfs4_lockdata *data = calldata;
struct nfs4_state *state = data->lsp->ls_state;
- dprintk("%s: begin!\n", __FUNCTION__);
+ dprintk("%s: begin!\n", __func__);
if (nfs_wait_on_sequence(data->arg.lock_seqid, task) != 0)
return;
/* Do we need to do an open_to_lock_owner? */
@@ -3356,14 +3354,14 @@
data->arg.new_lock_owner = 0;
data->timestamp = jiffies;
rpc_call_start(task);
- dprintk("%s: done!, ret = %d\n", __FUNCTION__, data->rpc_status);
+ dprintk("%s: done!, ret = %d\n", __func__, data->rpc_status);
}
static void nfs4_lock_done(struct rpc_task *task, void *calldata)
{
struct nfs4_lockdata *data = calldata;
- dprintk("%s: begin!\n", __FUNCTION__);
+ dprintk("%s: begin!\n", __func__);
data->rpc_status = task->tk_status;
if (RPC_ASSASSINATED(task))
@@ -3381,14 +3379,14 @@
renew_lease(NFS_SERVER(data->ctx->path.dentry->d_inode), data->timestamp);
}
out:
- dprintk("%s: done, ret = %d!\n", __FUNCTION__, data->rpc_status);
+ dprintk("%s: done, ret = %d!\n", __func__, data->rpc_status);
}
static void nfs4_lock_release(void *calldata)
{
struct nfs4_lockdata *data = calldata;
- dprintk("%s: begin!\n", __FUNCTION__);
+ dprintk("%s: begin!\n", __func__);
nfs_free_seqid(data->arg.open_seqid);
if (data->cancelled != 0) {
struct rpc_task *task;
@@ -3396,13 +3394,13 @@
data->arg.lock_seqid);
if (!IS_ERR(task))
rpc_put_task(task);
- dprintk("%s: cancelling lock!\n", __FUNCTION__);
+ dprintk("%s: cancelling lock!\n", __func__);
} else
nfs_free_seqid(data->arg.lock_seqid);
nfs4_put_lock_state(data->lsp);
put_nfs_open_context(data->ctx);
kfree(data);
- dprintk("%s: done!\n", __FUNCTION__);
+ dprintk("%s: done!\n", __func__);
}
static const struct rpc_call_ops nfs4_lock_ops = {
@@ -3428,7 +3426,7 @@
};
int ret;
- dprintk("%s: begin!\n", __FUNCTION__);
+ dprintk("%s: begin!\n", __func__);
data = nfs4_alloc_lockdata(fl, nfs_file_open_context(fl->fl_file),
fl->fl_u.nfs4_fl.owner);
if (data == NULL)
@@ -3451,7 +3449,7 @@
} else
data->cancelled = 1;
rpc_put_task(task);
- dprintk("%s: done, ret = %d!\n", __FUNCTION__, ret);
+ dprintk("%s: done, ret = %d!\n", __func__, ret);
return ret;
}
@@ -3527,7 +3525,7 @@
/* Note: we always want to sleep here! */
request->fl_flags = fl_flags | FL_SLEEP;
if (do_vfs_lock(request->fl_file, request) < 0)
- printk(KERN_WARNING "%s: VFS is out of sync with lock manager!\n", __FUNCTION__);
+ printk(KERN_WARNING "%s: VFS is out of sync with lock manager!\n", __func__);
out_unlock:
up_read(&clp->cl_sem);
out:
@@ -3665,12 +3663,12 @@
};
int status;
- dprintk("%s: start\n", __FUNCTION__);
+ dprintk("%s: start\n", __func__);
nfs_fattr_init(&fs_locations->fattr);
fs_locations->server = server;
fs_locations->nlocations = 0;
status = rpc_call_sync(server->client, &msg, 0);
- dprintk("%s: returned status = %d\n", __FUNCTION__, status);
+ dprintk("%s: returned status = %d\n", __func__, status);
return status;
}
diff --git a/fs/nfs/nfs4renewd.c b/fs/nfs/nfs4renewd.c
index 5e2e4af..3305acb 100644
--- a/fs/nfs/nfs4renewd.c
+++ b/fs/nfs/nfs4renewd.c
@@ -66,7 +66,7 @@
unsigned long last, now;
down_read(&clp->cl_sem);
- dprintk("%s: start\n", __FUNCTION__);
+ dprintk("%s: start\n", __func__);
/* Are there any active superblocks? */
if (list_empty(&clp->cl_superblocks))
goto out;
@@ -92,17 +92,17 @@
spin_lock(&clp->cl_lock);
} else
dprintk("%s: failed to call renewd. Reason: lease not expired \n",
- __FUNCTION__);
+ __func__);
if (timeout < 5 * HZ) /* safeguard */
timeout = 5 * HZ;
dprintk("%s: requeueing work. Lease period = %ld\n",
- __FUNCTION__, (timeout + HZ - 1) / HZ);
+ __func__, (timeout + HZ - 1) / HZ);
cancel_delayed_work(&clp->cl_renewd);
schedule_delayed_work(&clp->cl_renewd, timeout);
spin_unlock(&clp->cl_lock);
out:
up_read(&clp->cl_sem);
- dprintk("%s: done\n", __FUNCTION__);
+ dprintk("%s: done\n", __func__);
}
/* Must be called with clp->cl_sem locked for writes */
@@ -117,7 +117,7 @@
if (timeout < 5 * HZ)
timeout = 5 * HZ;
dprintk("%s: requeueing work. Lease period = %ld\n",
- __FUNCTION__, (timeout + HZ - 1) / HZ);
+ __func__, (timeout + HZ - 1) / HZ);
cancel_delayed_work(&clp->cl_renewd);
schedule_delayed_work(&clp->cl_renewd, timeout);
set_bit(NFS_CS_RENEWD, &clp->cl_res_state);
diff --git a/fs/nfs/nfs4state.c b/fs/nfs/nfs4state.c
index 46eb624..856a893 100644
--- a/fs/nfs/nfs4state.c
+++ b/fs/nfs/nfs4state.c
@@ -282,7 +282,7 @@
return sp;
}
-void
+static void
nfs4_drop_state_owner(struct nfs4_state_owner *sp)
{
if (!RB_EMPTY_NODE(&sp->so_client_node)) {
@@ -828,7 +828,7 @@
switch (status) {
default:
printk(KERN_ERR "%s: unhandled error %d. Zeroing state\n",
- __FUNCTION__, status);
+ __func__, status);
case -NFS4ERR_EXPIRED:
case -NFS4ERR_NO_GRACE:
case -NFS4ERR_RECLAIM_BAD:
@@ -869,14 +869,14 @@
list_for_each_entry(lock, &state->lock_states, ls_locks) {
if (!(lock->ls_flags & NFS_LOCK_INITIALIZED))
printk("%s: Lock reclaim failed!\n",
- __FUNCTION__);
+ __func__);
}
continue;
}
switch (status) {
default:
printk(KERN_ERR "%s: unhandled error %d. Zeroing state\n",
- __FUNCTION__, status);
+ __func__, status);
case -ENOENT:
case -NFS4ERR_RECLAIM_BAD:
case -NFS4ERR_RECLAIM_CONFLICT:
diff --git a/fs/nfs/nfs4xdr.c b/fs/nfs/nfs4xdr.c
index 5a2d649..b916297 100644
--- a/fs/nfs/nfs4xdr.c
+++ b/fs/nfs/nfs4xdr.c
@@ -1831,7 +1831,7 @@
xdr_inline_pages(&req->rq_rcv_buf, replen, args->pages,
args->pgbase, args->count);
dprintk("%s: inlined page args = (%u, %p, %u, %u)\n",
- __FUNCTION__, replen, args->pages,
+ __func__, replen, args->pages,
args->pgbase, args->count);
out:
@@ -2192,9 +2192,9 @@
p = xdr_inline_decode(xdr, nbytes); \
if (unlikely(!p)) { \
dprintk("nfs: %s: prematurely hit end of receive" \
- " buffer\n", __FUNCTION__); \
+ " buffer\n", __func__); \
dprintk("nfs: %s: xdr->p=%p, bytes=%u, xdr->end=%p\n", \
- __FUNCTION__, xdr->p, nbytes, xdr->end); \
+ __func__, xdr->p, nbytes, xdr->end); \
return -EIO; \
} \
} while (0)
@@ -2306,12 +2306,12 @@
READ_BUF(4);
READ32(*type);
if (*type < NF4REG || *type > NF4NAMEDATTR) {
- dprintk("%s: bad type %d\n", __FUNCTION__, *type);
+ dprintk("%s: bad type %d\n", __func__, *type);
return -EIO;
}
bitmap[0] &= ~FATTR4_WORD0_TYPE;
}
- dprintk("%s: type=0%o\n", __FUNCTION__, nfs_type2fmt[*type].nfs2type);
+ dprintk("%s: type=0%o\n", __func__, nfs_type2fmt[*type].nfs2type);
return 0;
}
@@ -2327,7 +2327,7 @@
READ64(*change);
bitmap[0] &= ~FATTR4_WORD0_CHANGE;
}
- dprintk("%s: change attribute=%Lu\n", __FUNCTION__,
+ dprintk("%s: change attribute=%Lu\n", __func__,
(unsigned long long)*change);
return 0;
}
@@ -2344,7 +2344,7 @@
READ64(*size);
bitmap[0] &= ~FATTR4_WORD0_SIZE;
}
- dprintk("%s: file size=%Lu\n", __FUNCTION__, (unsigned long long)*size);
+ dprintk("%s: file size=%Lu\n", __func__, (unsigned long long)*size);
return 0;
}
@@ -2360,7 +2360,7 @@
READ32(*res);
bitmap[0] &= ~FATTR4_WORD0_LINK_SUPPORT;
}
- dprintk("%s: link support=%s\n", __FUNCTION__, *res == 0 ? "false" : "true");
+ dprintk("%s: link support=%s\n", __func__, *res == 0 ? "false" : "true");
return 0;
}
@@ -2376,7 +2376,7 @@
READ32(*res);
bitmap[0] &= ~FATTR4_WORD0_SYMLINK_SUPPORT;
}
- dprintk("%s: symlink support=%s\n", __FUNCTION__, *res == 0 ? "false" : "true");
+ dprintk("%s: symlink support=%s\n", __func__, *res == 0 ? "false" : "true");
return 0;
}
@@ -2394,7 +2394,7 @@
READ64(fsid->minor);
bitmap[0] &= ~FATTR4_WORD0_FSID;
}
- dprintk("%s: fsid=(0x%Lx/0x%Lx)\n", __FUNCTION__,
+ dprintk("%s: fsid=(0x%Lx/0x%Lx)\n", __func__,
(unsigned long long)fsid->major,
(unsigned long long)fsid->minor);
return 0;
@@ -2412,7 +2412,7 @@
READ32(*res);
bitmap[0] &= ~FATTR4_WORD0_LEASE_TIME;
}
- dprintk("%s: file size=%u\n", __FUNCTION__, (unsigned int)*res);
+ dprintk("%s: file size=%u\n", __func__, (unsigned int)*res);
return 0;
}
@@ -2428,7 +2428,7 @@
READ32(*res);
bitmap[0] &= ~FATTR4_WORD0_ACLSUPPORT;
}
- dprintk("%s: ACLs supported=%u\n", __FUNCTION__, (unsigned int)*res);
+ dprintk("%s: ACLs supported=%u\n", __func__, (unsigned int)*res);
return 0;
}
@@ -2444,7 +2444,7 @@
READ64(*fileid);
bitmap[0] &= ~FATTR4_WORD0_FILEID;
}
- dprintk("%s: fileid=%Lu\n", __FUNCTION__, (unsigned long long)*fileid);
+ dprintk("%s: fileid=%Lu\n", __func__, (unsigned long long)*fileid);
return 0;
}
@@ -2460,7 +2460,7 @@
READ64(*fileid);
bitmap[1] &= ~FATTR4_WORD1_MOUNTED_ON_FILEID;
}
- dprintk("%s: fileid=%Lu\n", __FUNCTION__, (unsigned long long)*fileid);
+ dprintk("%s: fileid=%Lu\n", __func__, (unsigned long long)*fileid);
return 0;
}
@@ -2477,7 +2477,7 @@
READ64(*res);
bitmap[0] &= ~FATTR4_WORD0_FILES_AVAIL;
}
- dprintk("%s: files avail=%Lu\n", __FUNCTION__, (unsigned long long)*res);
+ dprintk("%s: files avail=%Lu\n", __func__, (unsigned long long)*res);
return status;
}
@@ -2494,7 +2494,7 @@
READ64(*res);
bitmap[0] &= ~FATTR4_WORD0_FILES_FREE;
}
- dprintk("%s: files free=%Lu\n", __FUNCTION__, (unsigned long long)*res);
+ dprintk("%s: files free=%Lu\n", __func__, (unsigned long long)*res);
return status;
}
@@ -2511,7 +2511,7 @@
READ64(*res);
bitmap[0] &= ~FATTR4_WORD0_FILES_TOTAL;
}
- dprintk("%s: files total=%Lu\n", __FUNCTION__, (unsigned long long)*res);
+ dprintk("%s: files total=%Lu\n", __func__, (unsigned long long)*res);
return status;
}
@@ -2569,7 +2569,7 @@
status = 0;
if (unlikely(!(bitmap[0] & FATTR4_WORD0_FS_LOCATIONS)))
goto out;
- dprintk("%s: fsroot ", __FUNCTION__);
+ dprintk("%s: fsroot ", __func__);
status = decode_pathname(xdr, &res->fs_path);
if (unlikely(status != 0))
goto out;
@@ -2586,7 +2586,7 @@
READ32(m);
loc->nservers = 0;
- dprintk("%s: servers ", __FUNCTION__);
+ dprintk("%s: servers ", __func__);
while (loc->nservers < m) {
struct nfs4_string *server = &loc->servers[loc->nservers];
status = decode_opaque_inline(xdr, &server->len, &server->data);
@@ -2599,7 +2599,7 @@
unsigned int i;
dprintk("%s: using first %u of %u servers "
"returned for location %u\n",
- __FUNCTION__,
+ __func__,
NFS4_FS_LOCATION_MAXSERVERS,
m, res->nlocations);
for (i = loc->nservers; i < m; i++) {
@@ -2618,7 +2618,7 @@
res->nlocations++;
}
out:
- dprintk("%s: fs_locations done, error = %d\n", __FUNCTION__, status);
+ dprintk("%s: fs_locations done, error = %d\n", __func__, status);
return status;
out_eio:
status = -EIO;
@@ -2638,7 +2638,7 @@
READ64(*res);
bitmap[0] &= ~FATTR4_WORD0_MAXFILESIZE;
}
- dprintk("%s: maxfilesize=%Lu\n", __FUNCTION__, (unsigned long long)*res);
+ dprintk("%s: maxfilesize=%Lu\n", __func__, (unsigned long long)*res);
return status;
}
@@ -2655,7 +2655,7 @@
READ32(*maxlink);
bitmap[0] &= ~FATTR4_WORD0_MAXLINK;
}
- dprintk("%s: maxlink=%u\n", __FUNCTION__, *maxlink);
+ dprintk("%s: maxlink=%u\n", __func__, *maxlink);
return status;
}
@@ -2672,7 +2672,7 @@
READ32(*maxname);
bitmap[0] &= ~FATTR4_WORD0_MAXNAME;
}
- dprintk("%s: maxname=%u\n", __FUNCTION__, *maxname);
+ dprintk("%s: maxname=%u\n", __func__, *maxname);
return status;
}
@@ -2693,7 +2693,7 @@
*res = (uint32_t)maxread;
bitmap[0] &= ~FATTR4_WORD0_MAXREAD;
}
- dprintk("%s: maxread=%lu\n", __FUNCTION__, (unsigned long)*res);
+ dprintk("%s: maxread=%lu\n", __func__, (unsigned long)*res);
return status;
}
@@ -2714,7 +2714,7 @@
*res = (uint32_t)maxwrite;
bitmap[0] &= ~FATTR4_WORD0_MAXWRITE;
}
- dprintk("%s: maxwrite=%lu\n", __FUNCTION__, (unsigned long)*res);
+ dprintk("%s: maxwrite=%lu\n", __func__, (unsigned long)*res);
return status;
}
@@ -2731,7 +2731,7 @@
*mode &= ~S_IFMT;
bitmap[1] &= ~FATTR4_WORD1_MODE;
}
- dprintk("%s: file mode=0%o\n", __FUNCTION__, (unsigned int)*mode);
+ dprintk("%s: file mode=0%o\n", __func__, (unsigned int)*mode);
return 0;
}
@@ -2747,7 +2747,7 @@
READ32(*nlink);
bitmap[1] &= ~FATTR4_WORD1_NUMLINKS;
}
- dprintk("%s: nlink=%u\n", __FUNCTION__, (unsigned int)*nlink);
+ dprintk("%s: nlink=%u\n", __func__, (unsigned int)*nlink);
return 0;
}
@@ -2766,13 +2766,13 @@
if (len < XDR_MAX_NETOBJ) {
if (nfs_map_name_to_uid(clp, (char *)p, len, uid) != 0)
dprintk("%s: nfs_map_name_to_uid failed!\n",
- __FUNCTION__);
+ __func__);
} else
dprintk("%s: name too long (%u)!\n",
- __FUNCTION__, len);
+ __func__, len);
bitmap[1] &= ~FATTR4_WORD1_OWNER;
}
- dprintk("%s: uid=%d\n", __FUNCTION__, (int)*uid);
+ dprintk("%s: uid=%d\n", __func__, (int)*uid);
return 0;
}
@@ -2791,13 +2791,13 @@
if (len < XDR_MAX_NETOBJ) {
if (nfs_map_group_to_gid(clp, (char *)p, len, gid) != 0)
dprintk("%s: nfs_map_group_to_gid failed!\n",
- __FUNCTION__);
+ __func__);
} else
dprintk("%s: name too long (%u)!\n",
- __FUNCTION__, len);
+ __func__, len);
bitmap[1] &= ~FATTR4_WORD1_OWNER_GROUP;
}
- dprintk("%s: gid=%d\n", __FUNCTION__, (int)*gid);
+ dprintk("%s: gid=%d\n", __func__, (int)*gid);
return 0;
}
@@ -2820,7 +2820,7 @@
*rdev = tmp;
bitmap[1] &= ~ FATTR4_WORD1_RAWDEV;
}
- dprintk("%s: rdev=(0x%x:0x%x)\n", __FUNCTION__, major, minor);
+ dprintk("%s: rdev=(0x%x:0x%x)\n", __func__, major, minor);
return 0;
}
@@ -2837,7 +2837,7 @@
READ64(*res);
bitmap[1] &= ~FATTR4_WORD1_SPACE_AVAIL;
}
- dprintk("%s: space avail=%Lu\n", __FUNCTION__, (unsigned long long)*res);
+ dprintk("%s: space avail=%Lu\n", __func__, (unsigned long long)*res);
return status;
}
@@ -2854,7 +2854,7 @@
READ64(*res);
bitmap[1] &= ~FATTR4_WORD1_SPACE_FREE;
}
- dprintk("%s: space free=%Lu\n", __FUNCTION__, (unsigned long long)*res);
+ dprintk("%s: space free=%Lu\n", __func__, (unsigned long long)*res);
return status;
}
@@ -2871,7 +2871,7 @@
READ64(*res);
bitmap[1] &= ~FATTR4_WORD1_SPACE_TOTAL;
}
- dprintk("%s: space total=%Lu\n", __FUNCTION__, (unsigned long long)*res);
+ dprintk("%s: space total=%Lu\n", __func__, (unsigned long long)*res);
return status;
}
@@ -2887,7 +2887,7 @@
READ64(*used);
bitmap[1] &= ~FATTR4_WORD1_SPACE_USED;
}
- dprintk("%s: space used=%Lu\n", __FUNCTION__,
+ dprintk("%s: space used=%Lu\n", __func__,
(unsigned long long)*used);
return 0;
}
@@ -2918,7 +2918,7 @@
status = decode_attr_time(xdr, time);
bitmap[1] &= ~FATTR4_WORD1_TIME_ACCESS;
}
- dprintk("%s: atime=%ld\n", __FUNCTION__, (long)time->tv_sec);
+ dprintk("%s: atime=%ld\n", __func__, (long)time->tv_sec);
return status;
}
@@ -2934,7 +2934,7 @@
status = decode_attr_time(xdr, time);
bitmap[1] &= ~FATTR4_WORD1_TIME_METADATA;
}
- dprintk("%s: ctime=%ld\n", __FUNCTION__, (long)time->tv_sec);
+ dprintk("%s: ctime=%ld\n", __func__, (long)time->tv_sec);
return status;
}
@@ -2950,7 +2950,7 @@
status = decode_attr_time(xdr, time);
bitmap[1] &= ~FATTR4_WORD1_TIME_MODIFY;
}
- dprintk("%s: mtime=%ld\n", __FUNCTION__, (long)time->tv_sec);
+ dprintk("%s: mtime=%ld\n", __func__, (long)time->tv_sec);
return status;
}
@@ -2962,7 +2962,7 @@
if (unlikely(attrwords != nwords)) {
dprintk("%s: server returned incorrect attribute length: "
"%u %c %u\n",
- __FUNCTION__,
+ __func__,
attrwords << 2,
(attrwords < nwords) ? '<' : '>',
nwords << 2);
@@ -3067,7 +3067,7 @@
goto xdr_error;
status = verify_attr_len(xdr, savep, attrlen);
xdr_error:
- dprintk("%s: xdr returned %d!\n", __FUNCTION__, -status);
+ dprintk("%s: xdr returned %d!\n", __func__, -status);
return status;
}
@@ -3100,7 +3100,7 @@
status = verify_attr_len(xdr, savep, attrlen);
xdr_error:
- dprintk("%s: xdr returned %d!\n", __FUNCTION__, -status);
+ dprintk("%s: xdr returned %d!\n", __func__, -status);
return status;
}
@@ -3125,7 +3125,7 @@
status = verify_attr_len(xdr, savep, attrlen);
xdr_error:
- dprintk("%s: xdr returned %d!\n", __FUNCTION__, -status);
+ dprintk("%s: xdr returned %d!\n", __func__, -status);
return status;
}
@@ -3193,7 +3193,7 @@
if ((status = verify_attr_len(xdr, savep, attrlen)) == 0)
fattr->valid = NFS_ATTR_FATTR | NFS_ATTR_FATTR_V3 | NFS_ATTR_FATTR_V4;
xdr_error:
- dprintk("%s: xdr returned %d\n", __FUNCTION__, -status);
+ dprintk("%s: xdr returned %d\n", __func__, -status);
return status;
}
@@ -3226,7 +3226,7 @@
status = verify_attr_len(xdr, savep, attrlen);
xdr_error:
- dprintk("%s: xdr returned %d!\n", __FUNCTION__, -status);
+ dprintk("%s: xdr returned %d!\n", __func__, -status);
return status;
}
@@ -3418,7 +3418,7 @@
return decode_delegation(xdr, res);
xdr_error:
- dprintk("%s: Bitmap too large! Length = %u\n", __FUNCTION__, bmlen);
+ dprintk("%s: Bitmap too large! Length = %u\n", __func__, bmlen);
return -EIO;
}
@@ -3575,7 +3575,7 @@
* the call was successful, but incomplete. The caller can retry the
* readdir starting at the last cookie.
*/
- dprintk("%s: short packet at entry %d\n", __FUNCTION__, nr);
+ dprintk("%s: short packet at entry %d\n", __func__, nr);
entry[0] = entry[1] = 0;
if (nr)
goto out;
diff --git a/fs/nfs/proc.c b/fs/nfs/proc.c
index 5ccf7fa..03599bf 100644
--- a/fs/nfs/proc.c
+++ b/fs/nfs/proc.c
@@ -63,17 +63,17 @@
};
int status;
- dprintk("%s: call getattr\n", __FUNCTION__);
+ dprintk("%s: call getattr\n", __func__);
nfs_fattr_init(fattr);
status = rpc_call_sync(server->nfs_client->cl_rpcclient, &msg, 0);
- dprintk("%s: reply getattr: %d\n", __FUNCTION__, status);
+ dprintk("%s: reply getattr: %d\n", __func__, status);
if (status)
return status;
- dprintk("%s: call statfs\n", __FUNCTION__);
+ dprintk("%s: call statfs\n", __func__);
msg.rpc_proc = &nfs_procedures[NFSPROC_STATFS];
msg.rpc_resp = &fsinfo;
status = rpc_call_sync(server->nfs_client->cl_rpcclient, &msg, 0);
- dprintk("%s: reply statfs: %d\n", __FUNCTION__, status);
+ dprintk("%s: reply statfs: %d\n", __func__, status);
if (status)
return status;
info->rtmax = NFS_MAXDATA;
diff --git a/fs/nfs/read.c b/fs/nfs/read.c
index 16f57e0..40d1798 100644
--- a/fs/nfs/read.c
+++ b/fs/nfs/read.c
@@ -329,7 +329,7 @@
{
int status;
- dprintk("NFS: %s: %5u, (status %d)\n", __FUNCTION__, task->tk_pid,
+ dprintk("NFS: %s: %5u, (status %d)\n", __func__, task->tk_pid,
task->tk_status);
status = NFS_PROTO(data->inode)->read_done(task, data);
diff --git a/fs/nfs/super.c b/fs/nfs/super.c
index 7226a50..2a4a024 100644
--- a/fs/nfs/super.c
+++ b/fs/nfs/super.c
@@ -405,7 +405,7 @@
return 0;
out_err:
- dprintk("%s: statfs error = %d\n", __FUNCTION__, -error);
+ dprintk("%s: statfs error = %d\n", __func__, -error);
unlock_kernel();
return error;
}
@@ -2015,6 +2015,10 @@
goto error_splat_super;
}
+ error = security_sb_set_mnt_opts(s, &data.lsm_opts);
+ if (error)
+ goto error_splat_root;
+
s->s_flags |= MS_ACTIVE;
mnt->mnt_sb = s;
mnt->mnt_root = mntroot;
@@ -2031,6 +2035,8 @@
nfs_free_server(server);
goto out;
+error_splat_root:
+ dput(mntroot);
error_splat_super:
up_write(&s->s_umount);
deactivate_super(s);
@@ -2114,6 +2120,8 @@
mnt->mnt_sb = s;
mnt->mnt_root = mntroot;
+ security_sb_clone_mnt_opts(data->sb, s);
+
dprintk("<-- nfs4_xdev_get_sb() = 0\n");
return 0;
@@ -2197,6 +2205,8 @@
mnt->mnt_sb = s;
mnt->mnt_root = mntroot;
+ security_sb_clone_mnt_opts(data->sb, s);
+
dprintk("<-- nfs4_referral_get_sb() = 0\n");
return 0;
diff --git a/fs/nfs/write.c b/fs/nfs/write.c
index 1ade11d1..6d8ace3 100644
--- a/fs/nfs/write.c
+++ b/fs/nfs/write.c
@@ -415,7 +415,7 @@
if (page == NULL || test_bit(PG_NEED_COMMIT, &req->wb_flags))
return 0;
- return !PageWriteback(req->wb_page);
+ return !PageWriteback(page);
}
#if defined(CONFIG_NFS_V3) || defined(CONFIG_NFS_V4)
diff --git a/fs/nfsd/nfs4callback.c b/fs/nfsd/nfs4callback.c
index 0b3ffa9..4d4760e 100644
--- a/fs/nfsd/nfs4callback.c
+++ b/fs/nfsd/nfs4callback.c
@@ -419,9 +419,9 @@
out_release_client:
rpc_shutdown_client(client);
out_err:
- put_nfs4_client(clp);
dprintk("NFSD: warning: no callback path to client %.*s\n",
(int)clp->cl_name.len, clp->cl_name.data);
+ put_nfs4_client(clp);
return status;
}
diff --git a/fs/ntfs/upcase.c b/fs/ntfs/upcase.c
index 9101807..e2f72ca 100644
--- a/fs/ntfs/upcase.c
+++ b/fs/ntfs/upcase.c
@@ -77,11 +77,10 @@
uc[i] = cpu_to_le16(i);
for (r = 0; uc_run_table[r][0]; r++)
for (i = uc_run_table[r][0]; i < uc_run_table[r][1]; i++)
- uc[i] = cpu_to_le16(le16_to_cpu(uc[i]) +
- uc_run_table[r][2]);
+ le16_add_cpu(&uc[i], uc_run_table[r][2]);
for (r = 0; uc_dup_table[r][0]; r++)
for (i = uc_dup_table[r][0]; i < uc_dup_table[r][1]; i += 2)
- uc[i + 1] = cpu_to_le16(le16_to_cpu(uc[i + 1]) - 1);
+ le16_add_cpu(&uc[i + 1], -1);
for (r = 0; uc_word_table[r][0]; r++)
uc[uc_word_table[r][0]] = cpu_to_le16(uc_word_table[r][1]);
return uc;
diff --git a/fs/ocfs2/alloc.c b/fs/ocfs2/alloc.c
index 41f84c9..10bfb46 100644
--- a/fs/ocfs2/alloc.c
+++ b/fs/ocfs2/alloc.c
@@ -2788,7 +2788,7 @@
BUG_ON(index >= le16_to_cpu(el->l_next_free_rec));
left_rec = &el->l_recs[index];
- if (index == le16_to_cpu(el->l_next_free_rec - 1) &&
+ if (index == le16_to_cpu(el->l_next_free_rec) - 1 &&
le16_to_cpu(el->l_next_free_rec) == le16_to_cpu(el->l_count)) {
/* we meet with a cross extent block merge. */
ret = ocfs2_get_right_path(inode, left_path, &right_path);
@@ -2802,7 +2802,7 @@
BUG_ON(next_free <= 0);
right_rec = &right_el->l_recs[0];
if (ocfs2_is_empty_extent(right_rec)) {
- BUG_ON(le16_to_cpu(next_free) <= 1);
+ BUG_ON(next_free <= 1);
right_rec = &right_el->l_recs[1];
}
diff --git a/fs/ocfs2/cluster/tcp.c b/fs/ocfs2/cluster/tcp.c
index 1e44ad1..a27d615 100644
--- a/fs/ocfs2/cluster/tcp.c
+++ b/fs/ocfs2/cluster/tcp.c
@@ -142,53 +142,43 @@
static void o2net_sc_postpone_idle(struct o2net_sock_container *sc);
static void o2net_sc_reset_idle_timer(struct o2net_sock_container *sc);
-static void o2net_init_nst(struct o2net_send_tracking *nst, u32 msgtype,
- u32 msgkey, struct task_struct *task, u8 node)
-{
#ifdef CONFIG_DEBUG_FS
+void o2net_init_nst(struct o2net_send_tracking *nst, u32 msgtype,
+ u32 msgkey, struct task_struct *task, u8 node)
+{
INIT_LIST_HEAD(&nst->st_net_debug_item);
nst->st_task = task;
nst->st_msg_type = msgtype;
nst->st_msg_key = msgkey;
nst->st_node = node;
-#endif
}
-static void o2net_set_nst_sock_time(struct o2net_send_tracking *nst)
+void o2net_set_nst_sock_time(struct o2net_send_tracking *nst)
{
-#ifdef CONFIG_DEBUG_FS
do_gettimeofday(&nst->st_sock_time);
-#endif
}
-static void o2net_set_nst_send_time(struct o2net_send_tracking *nst)
+void o2net_set_nst_send_time(struct o2net_send_tracking *nst)
{
-#ifdef CONFIG_DEBUG_FS
do_gettimeofday(&nst->st_send_time);
-#endif
}
-static void o2net_set_nst_status_time(struct o2net_send_tracking *nst)
+void o2net_set_nst_status_time(struct o2net_send_tracking *nst)
{
-#ifdef CONFIG_DEBUG_FS
do_gettimeofday(&nst->st_status_time);
-#endif
}
-static void o2net_set_nst_sock_container(struct o2net_send_tracking *nst,
+void o2net_set_nst_sock_container(struct o2net_send_tracking *nst,
struct o2net_sock_container *sc)
{
-#ifdef CONFIG_DEBUG_FS
nst->st_sc = sc;
-#endif
}
-static void o2net_set_nst_msg_id(struct o2net_send_tracking *nst, u32 msg_id)
+void o2net_set_nst_msg_id(struct o2net_send_tracking *nst, u32 msg_id)
{
-#ifdef CONFIG_DEBUG_FS
nst->st_id = msg_id;
-#endif
}
+#endif /* CONFIG_DEBUG_FS */
static inline int o2net_reconnect_delay(void)
{
diff --git a/fs/ocfs2/cluster/tcp.h b/fs/ocfs2/cluster/tcp.h
index a705d5d..fd6179e 100644
--- a/fs/ocfs2/cluster/tcp.h
+++ b/fs/ocfs2/cluster/tcp.h
@@ -128,23 +128,23 @@
void o2net_debug_add_sc(struct o2net_sock_container *sc);
void o2net_debug_del_sc(struct o2net_sock_container *sc);
#else
-static int o2net_debugfs_init(void)
+static inline int o2net_debugfs_init(void)
{
return 0;
}
-static void o2net_debugfs_exit(void)
+static inline void o2net_debugfs_exit(void)
{
}
-static void o2net_debug_add_nst(struct o2net_send_tracking *nst)
+static inline void o2net_debug_add_nst(struct o2net_send_tracking *nst)
{
}
-static void o2net_debug_del_nst(struct o2net_send_tracking *nst)
+static inline void o2net_debug_del_nst(struct o2net_send_tracking *nst)
{
}
-static void o2net_debug_add_sc(struct o2net_sock_container *sc)
+static inline void o2net_debug_add_sc(struct o2net_sock_container *sc)
{
}
-static void o2net_debug_del_sc(struct o2net_sock_container *sc)
+static inline void o2net_debug_del_sc(struct o2net_sock_container *sc)
{
}
#endif /* CONFIG_DEBUG_FS */
diff --git a/fs/ocfs2/cluster/tcp_internal.h b/fs/ocfs2/cluster/tcp_internal.h
index 8d58cfe..18307ff 100644
--- a/fs/ocfs2/cluster/tcp_internal.h
+++ b/fs/ocfs2/cluster/tcp_internal.h
@@ -224,10 +224,42 @@
struct timeval st_send_time;
struct timeval st_status_time;
};
+
+void o2net_init_nst(struct o2net_send_tracking *nst, u32 msgtype,
+ u32 msgkey, struct task_struct *task, u8 node);
+void o2net_set_nst_sock_time(struct o2net_send_tracking *nst);
+void o2net_set_nst_send_time(struct o2net_send_tracking *nst);
+void o2net_set_nst_status_time(struct o2net_send_tracking *nst);
+void o2net_set_nst_sock_container(struct o2net_send_tracking *nst,
+ struct o2net_sock_container *sc);
+void o2net_set_nst_msg_id(struct o2net_send_tracking *nst, u32 msg_id);
+
#else
struct o2net_send_tracking {
u32 dummy;
};
+
+static inline void o2net_init_nst(struct o2net_send_tracking *nst, u32 msgtype,
+ u32 msgkey, struct task_struct *task, u8 node)
+{
+}
+static inline void o2net_set_nst_sock_time(struct o2net_send_tracking *nst)
+{
+}
+static inline void o2net_set_nst_send_time(struct o2net_send_tracking *nst)
+{
+}
+static inline void o2net_set_nst_status_time(struct o2net_send_tracking *nst)
+{
+}
+static inline void o2net_set_nst_sock_container(struct o2net_send_tracking *nst,
+ struct o2net_sock_container *sc)
+{
+}
+static inline void o2net_set_nst_msg_id(struct o2net_send_tracking *nst,
+ u32 msg_id)
+{
+}
#endif /* CONFIG_DEBUG_FS */
#endif /* O2CLUSTER_TCP_INTERNAL_H */
diff --git a/fs/ocfs2/dlm/dlmdebug.h b/fs/ocfs2/dlm/dlmdebug.h
index d34a62a..8c686d2 100644
--- a/fs/ocfs2/dlm/dlmdebug.h
+++ b/fs/ocfs2/dlm/dlmdebug.h
@@ -60,25 +60,25 @@
#else
-static int dlm_debug_init(struct dlm_ctxt *dlm)
+static inline int dlm_debug_init(struct dlm_ctxt *dlm)
{
return 0;
}
-static void dlm_debug_shutdown(struct dlm_ctxt *dlm)
+static inline void dlm_debug_shutdown(struct dlm_ctxt *dlm)
{
}
-static int dlm_create_debugfs_subroot(struct dlm_ctxt *dlm)
+static inline int dlm_create_debugfs_subroot(struct dlm_ctxt *dlm)
{
return 0;
}
-static void dlm_destroy_debugfs_subroot(struct dlm_ctxt *dlm)
+static inline void dlm_destroy_debugfs_subroot(struct dlm_ctxt *dlm)
{
}
-static int dlm_create_debugfs_root(void)
+static inline int dlm_create_debugfs_root(void)
{
return 0;
}
-static void dlm_destroy_debugfs_root(void)
+static inline void dlm_destroy_debugfs_root(void)
{
}
diff --git a/fs/ocfs2/stack_user.c b/fs/ocfs2/stack_user.c
index b503772..6b97d11 100644
--- a/fs/ocfs2/stack_user.c
+++ b/fs/ocfs2/stack_user.c
@@ -61,7 +61,7 @@
* negotiated by the client. The client negotiates based on the maximum
* version advertised in /sys/fs/ocfs2/max_locking_protocol. The major
* number from the "SETV" message must match
- * user_stack.sp_proto->lp_max_version.pv_major, and the minor number
+ * ocfs2_user_plugin.sp_proto->lp_max_version.pv_major, and the minor number
* must be less than or equal to ...->lp_max_version.pv_minor.
*
* Once this information has been set, mounts will be allowed. From this
@@ -153,7 +153,7 @@
struct ocfs2_control_message_down u_down;
};
-static struct ocfs2_stack_plugin user_stack;
+static struct ocfs2_stack_plugin ocfs2_user_plugin;
static atomic_t ocfs2_control_opened;
static int ocfs2_control_this_node = -1;
@@ -399,7 +399,7 @@
char *ptr = NULL;
struct ocfs2_control_private *p = file->private_data;
struct ocfs2_protocol_version *max =
- &user_stack.sp_proto->lp_max_version;
+ &ocfs2_user_plugin.sp_proto->lp_max_version;
if (ocfs2_control_get_handshake_state(file) !=
OCFS2_CONTROL_HANDSHAKE_PROTOCOL)
@@ -680,7 +680,7 @@
struct dlm_lksb *lksb = fsdlm_astarg_to_lksb(astarg);
int status = lksb->sb_status;
- BUG_ON(user_stack.sp_proto == NULL);
+ BUG_ON(ocfs2_user_plugin.sp_proto == NULL);
/*
* For now we're punting on the issue of other non-standard errors
@@ -693,16 +693,16 @@
*/
if (status == -DLM_EUNLOCK || status == -DLM_ECANCEL)
- user_stack.sp_proto->lp_unlock_ast(astarg, 0);
+ ocfs2_user_plugin.sp_proto->lp_unlock_ast(astarg, 0);
else
- user_stack.sp_proto->lp_lock_ast(astarg);
+ ocfs2_user_plugin.sp_proto->lp_lock_ast(astarg);
}
static void fsdlm_blocking_ast_wrapper(void *astarg, int level)
{
- BUG_ON(user_stack.sp_proto == NULL);
+ BUG_ON(ocfs2_user_plugin.sp_proto == NULL);
- user_stack.sp_proto->lp_blocking_ast(astarg, level);
+ ocfs2_user_plugin.sp_proto->lp_blocking_ast(astarg, level);
}
static int user_dlm_lock(struct ocfs2_cluster_connection *conn,
@@ -838,7 +838,7 @@
return 0;
}
-static struct ocfs2_stack_operations user_stack_ops = {
+static struct ocfs2_stack_operations ocfs2_user_plugin_ops = {
.connect = user_cluster_connect,
.disconnect = user_cluster_disconnect,
.this_node = user_cluster_this_node,
@@ -849,20 +849,20 @@
.dump_lksb = user_dlm_dump_lksb,
};
-static struct ocfs2_stack_plugin user_stack = {
+static struct ocfs2_stack_plugin ocfs2_user_plugin = {
.sp_name = "user",
- .sp_ops = &user_stack_ops,
+ .sp_ops = &ocfs2_user_plugin_ops,
.sp_owner = THIS_MODULE,
};
-static int __init user_stack_init(void)
+static int __init ocfs2_user_plugin_init(void)
{
int rc;
rc = ocfs2_control_init();
if (!rc) {
- rc = ocfs2_stack_glue_register(&user_stack);
+ rc = ocfs2_stack_glue_register(&ocfs2_user_plugin);
if (rc)
ocfs2_control_exit();
}
@@ -870,14 +870,14 @@
return rc;
}
-static void __exit user_stack_exit(void)
+static void __exit ocfs2_user_plugin_exit(void)
{
- ocfs2_stack_glue_unregister(&user_stack);
+ ocfs2_stack_glue_unregister(&ocfs2_user_plugin);
ocfs2_control_exit();
}
MODULE_AUTHOR("Oracle");
MODULE_DESCRIPTION("ocfs2 driver for userspace cluster stacks");
MODULE_LICENSE("GPL");
-module_init(user_stack_init);
-module_exit(user_stack_exit);
+module_init(ocfs2_user_plugin_init);
+module_exit(ocfs2_user_plugin_exit);
diff --git a/fs/proc/array.c b/fs/proc/array.c
index dca997a..797d775 100644
--- a/fs/proc/array.c
+++ b/fs/proc/array.c
@@ -288,7 +288,7 @@
seq_printf(m, "%s", header);
CAP_FOR_EACH_U32(__capi) {
seq_printf(m, "%08x",
- a->cap[(_LINUX_CAPABILITY_U32S-1) - __capi]);
+ a->cap[(_KERNEL_CAPABILITY_U32S-1) - __capi]);
}
seq_printf(m, "\n");
}
@@ -298,6 +298,7 @@
render_cap_t(m, "CapInh:\t", &p->cap_inheritable);
render_cap_t(m, "CapPrm:\t", &p->cap_permitted);
render_cap_t(m, "CapEff:\t", &p->cap_effective);
+ render_cap_t(m, "CapBnd:\t", &p->cap_bset);
}
static inline void task_context_switch_counts(struct seq_file *m,
diff --git a/fs/proc/base.c b/fs/proc/base.c
index 808cbdc..3b45537 100644
--- a/fs/proc/base.c
+++ b/fs/proc/base.c
@@ -127,6 +127,25 @@
NULL, &proc_single_file_operations, \
{ .proc_show = &proc_##OTYPE } )
+/*
+ * Count the number of hardlinks for the pid_entry table, excluding the .
+ * and .. links.
+ */
+static unsigned int pid_entry_count_dirs(const struct pid_entry *entries,
+ unsigned int n)
+{
+ unsigned int i;
+ unsigned int count;
+
+ count = 0;
+ for (i = 0; i < n; ++i) {
+ if (S_ISDIR(entries[i].mode))
+ ++count;
+ }
+
+ return count;
+}
+
int maps_protect;
EXPORT_SYMBOL(maps_protect);
@@ -2441,7 +2460,7 @@
REG("oom_adj", S_IRUGO|S_IWUSR, oom_adjust),
#ifdef CONFIG_AUDITSYSCALL
REG("loginuid", S_IWUSR|S_IRUGO, loginuid),
- REG("sessionid", S_IRUSR, sessionid),
+ REG("sessionid", S_IRUGO, sessionid),
#endif
#ifdef CONFIG_FAULT_INJECTION
REG("make-it-fail", S_IRUGO|S_IWUSR, fault_inject),
@@ -2585,10 +2604,9 @@
inode->i_op = &proc_tgid_base_inode_operations;
inode->i_fop = &proc_tgid_base_operations;
inode->i_flags|=S_IMMUTABLE;
- inode->i_nlink = 5;
-#ifdef CONFIG_SECURITY
- inode->i_nlink += 1;
-#endif
+
+ inode->i_nlink = 2 + pid_entry_count_dirs(tgid_base_stuff,
+ ARRAY_SIZE(tgid_base_stuff));
dentry->d_op = &pid_dentry_operations;
@@ -2816,10 +2834,9 @@
inode->i_op = &proc_tid_base_inode_operations;
inode->i_fop = &proc_tid_base_operations;
inode->i_flags|=S_IMMUTABLE;
- inode->i_nlink = 4;
-#ifdef CONFIG_SECURITY
- inode->i_nlink += 1;
-#endif
+
+ inode->i_nlink = 2 + pid_entry_count_dirs(tid_base_stuff,
+ ARRAY_SIZE(tid_base_stuff));
dentry->d_op = &pid_dentry_operations;
diff --git a/fs/proc/inode.c b/fs/proc/inode.c
index 6f4e8dc..b08d100 100644
--- a/fs/proc/inode.c
+++ b/fs/proc/inode.c
@@ -425,7 +425,8 @@
}
}
unlock_new_inode(inode);
- }
+ } else
+ module_put(de->owner);
return inode;
out_ino:
diff --git a/fs/proc/proc_misc.c b/fs/proc/proc_misc.c
index 74a323d..7e277f2 100644
--- a/fs/proc/proc_misc.c
+++ b/fs/proc/proc_misc.c
@@ -139,7 +139,7 @@
#define K(x) ((x) << (PAGE_SHIFT - 10))
si_meminfo(&i);
si_swapinfo(&i);
- committed = atomic_read(&vm_committed_space);
+ committed = atomic_long_read(&vm_committed_space);
allowed = ((totalram_pages - hugetlb_total_pages())
* sysctl_overcommit_ratio / 100) + total_swap_pages;
@@ -716,7 +716,7 @@
pfn = src / KPMSIZE;
count = min_t(size_t, count, (max_pfn * KPMSIZE) - src);
if (src & KPMMASK || count & KPMMASK)
- return -EIO;
+ return -EINVAL;
while (count > 0) {
ppage = NULL;
@@ -726,7 +726,7 @@
if (!ppage)
pcount = 0;
else
- pcount = atomic_read(&ppage->_count);
+ pcount = page_mapcount(ppage);
if (put_user(pcount, out++)) {
ret = -EFAULT;
@@ -782,7 +782,7 @@
pfn = src / KPMSIZE;
count = min_t(unsigned long, count, (max_pfn * KPMSIZE) - src);
if (src & KPMMASK || count & KPMMASK)
- return -EIO;
+ return -EINVAL;
while (count > 0) {
ppage = NULL;
diff --git a/fs/proc/task_mmu.c b/fs/proc/task_mmu.c
index 88717c0..ab8ccc9 100644
--- a/fs/proc/task_mmu.c
+++ b/fs/proc/task_mmu.c
@@ -315,9 +315,9 @@
};
static int smaps_pte_range(pmd_t *pmd, unsigned long addr, unsigned long end,
- void *private)
+ struct mm_walk *walk)
{
- struct mem_size_stats *mss = private;
+ struct mem_size_stats *mss = walk->private;
struct vm_area_struct *vma = mss->vma;
pte_t *pte, ptent;
spinlock_t *ptl;
@@ -365,19 +365,21 @@
return 0;
}
-static struct mm_walk smaps_walk = { .pmd_entry = smaps_pte_range };
-
static int show_smap(struct seq_file *m, void *v)
{
struct vm_area_struct *vma = v;
struct mem_size_stats mss;
int ret;
+ struct mm_walk smaps_walk = {
+ .pmd_entry = smaps_pte_range,
+ .mm = vma->vm_mm,
+ .private = &mss,
+ };
memset(&mss, 0, sizeof mss);
mss.vma = vma;
if (vma->vm_mm && !is_vm_hugetlb_page(vma))
- walk_page_range(vma->vm_mm, vma->vm_start, vma->vm_end,
- &smaps_walk, &mss);
+ walk_page_range(vma->vm_start, vma->vm_end, &smaps_walk);
ret = show_map(m, v);
if (ret)
@@ -426,9 +428,9 @@
};
static int clear_refs_pte_range(pmd_t *pmd, unsigned long addr,
- unsigned long end, void *private)
+ unsigned long end, struct mm_walk *walk)
{
- struct vm_area_struct *vma = private;
+ struct vm_area_struct *vma = walk->private;
pte_t *pte, ptent;
spinlock_t *ptl;
struct page *page;
@@ -452,8 +454,6 @@
return 0;
}
-static struct mm_walk clear_refs_walk = { .pmd_entry = clear_refs_pte_range };
-
static ssize_t clear_refs_write(struct file *file, const char __user *buf,
size_t count, loff_t *ppos)
{
@@ -476,11 +476,17 @@
return -ESRCH;
mm = get_task_mm(task);
if (mm) {
+ static struct mm_walk clear_refs_walk;
+ memset(&clear_refs_walk, 0, sizeof(clear_refs_walk));
+ clear_refs_walk.pmd_entry = clear_refs_pte_range;
+ clear_refs_walk.mm = mm;
down_read(&mm->mmap_sem);
- for (vma = mm->mmap; vma; vma = vma->vm_next)
+ for (vma = mm->mmap; vma; vma = vma->vm_next) {
+ clear_refs_walk.private = vma;
if (!is_vm_hugetlb_page(vma))
- walk_page_range(mm, vma->vm_start, vma->vm_end,
- &clear_refs_walk, vma);
+ walk_page_range(vma->vm_start, vma->vm_end,
+ &clear_refs_walk);
+ }
flush_tlb_mm(mm);
up_read(&mm->mmap_sem);
mmput(mm);
@@ -496,7 +502,7 @@
};
struct pagemapread {
- char __user *out, *end;
+ u64 __user *out, *end;
};
#define PM_ENTRY_BYTES sizeof(u64)
@@ -519,28 +525,18 @@
static int add_to_pagemap(unsigned long addr, u64 pfn,
struct pagemapread *pm)
{
- /*
- * Make sure there's room in the buffer for an
- * entire entry. Otherwise, only copy part of
- * the pfn.
- */
- if (pm->out + PM_ENTRY_BYTES >= pm->end) {
- if (copy_to_user(pm->out, &pfn, pm->end - pm->out))
- return -EFAULT;
- pm->out = pm->end;
- return PM_END_OF_BUFFER;
- }
-
if (put_user(pfn, pm->out))
return -EFAULT;
- pm->out += PM_ENTRY_BYTES;
+ pm->out++;
+ if (pm->out >= pm->end)
+ return PM_END_OF_BUFFER;
return 0;
}
static int pagemap_pte_hole(unsigned long start, unsigned long end,
- void *private)
+ struct mm_walk *walk)
{
- struct pagemapread *pm = private;
+ struct pagemapread *pm = walk->private;
unsigned long addr;
int err = 0;
for (addr = start; addr < end; addr += PAGE_SIZE) {
@@ -557,24 +553,45 @@
return swp_type(e) | (swp_offset(e) << MAX_SWAPFILES_SHIFT);
}
-static int pagemap_pte_range(pmd_t *pmd, unsigned long addr, unsigned long end,
- void *private)
+static unsigned long pte_to_pagemap_entry(pte_t pte)
{
- struct pagemapread *pm = private;
+ unsigned long pme = 0;
+ if (is_swap_pte(pte))
+ pme = PM_PFRAME(swap_pte_to_pagemap_entry(pte))
+ | PM_PSHIFT(PAGE_SHIFT) | PM_SWAP;
+ else if (pte_present(pte))
+ pme = PM_PFRAME(pte_pfn(pte))
+ | PM_PSHIFT(PAGE_SHIFT) | PM_PRESENT;
+ return pme;
+}
+
+static int pagemap_pte_range(pmd_t *pmd, unsigned long addr, unsigned long end,
+ struct mm_walk *walk)
+{
+ struct vm_area_struct *vma;
+ struct pagemapread *pm = walk->private;
pte_t *pte;
int err = 0;
+ /* find the first VMA at or above 'addr' */
+ vma = find_vma(walk->mm, addr);
for (; addr != end; addr += PAGE_SIZE) {
u64 pfn = PM_NOT_PRESENT;
- pte = pte_offset_map(pmd, addr);
- if (is_swap_pte(*pte))
- pfn = PM_PFRAME(swap_pte_to_pagemap_entry(*pte))
- | PM_PSHIFT(PAGE_SHIFT) | PM_SWAP;
- else if (pte_present(*pte))
- pfn = PM_PFRAME(pte_pfn(*pte))
- | PM_PSHIFT(PAGE_SHIFT) | PM_PRESENT;
- /* unmap so we're not in atomic when we copy to userspace */
- pte_unmap(pte);
+
+ /* check to see if we've left 'vma' behind
+ * and need a new, higher one */
+ if (vma && (addr >= vma->vm_end))
+ vma = find_vma(walk->mm, addr);
+
+ /* check that 'vma' actually covers this address,
+ * and that it isn't a huge page vma */
+ if (vma && (vma->vm_start <= addr) &&
+ !is_vm_hugetlb_page(vma)) {
+ pte = pte_offset_map(pmd, addr);
+ pfn = pte_to_pagemap_entry(*pte);
+ /* unmap before userspace copy */
+ pte_unmap(pte);
+ }
err = add_to_pagemap(addr, pfn, pm);
if (err)
return err;
@@ -634,7 +651,7 @@
ret = -EINVAL;
/* file position must be aligned */
- if (*ppos % PM_ENTRY_BYTES)
+ if ((*ppos % PM_ENTRY_BYTES) || (count % PM_ENTRY_BYTES))
goto out_task;
ret = 0;
@@ -664,8 +681,8 @@
goto out_pages;
}
- pm.out = buf;
- pm.end = buf + count;
+ pm.out = (u64 *)buf;
+ pm.end = (u64 *)(buf + count);
if (!ptrace_may_attach(task)) {
ret = -EIO;
@@ -685,14 +702,14 @@
* user buffer is tracked in "pm", and the walk
* will stop when we hit the end of the buffer.
*/
- ret = walk_page_range(mm, start_vaddr, end_vaddr,
- &pagemap_walk, &pm);
+ ret = walk_page_range(start_vaddr, end_vaddr,
+ &pagemap_walk);
if (ret == PM_END_OF_BUFFER)
ret = 0;
/* don't need mmap_sem for these, but this looks cleaner */
- *ppos += pm.out - buf;
+ *ppos += (char *)pm.out - buf;
if (!ret)
- ret = pm.out - buf;
+ ret = (char *)pm.out - buf;
}
out_pages:
diff --git a/fs/splice.c b/fs/splice.c
index 7815003..aa5f6f6 100644
--- a/fs/splice.c
+++ b/fs/splice.c
@@ -58,8 +58,8 @@
*/
wait_on_page_writeback(page);
- if (PagePrivate(page))
- try_to_release_page(page, GFP_KERNEL);
+ if (PagePrivate(page) && !try_to_release_page(page, GFP_KERNEL))
+ goto out_unlock;
/*
* If we succeeded in removing the mapping, set LRU flag
@@ -75,6 +75,7 @@
* Raced with truncate or failed to remove page from current
* address space, unlock and return failure.
*/
+out_unlock:
unlock_page(page);
return 1;
}
@@ -983,7 +984,7 @@
while (len) {
size_t read_len;
- loff_t pos = sd->pos;
+ loff_t pos = sd->pos, prev_pos = pos;
ret = do_splice_to(in, &pos, pipe, len, flags);
if (unlikely(ret <= 0))
@@ -998,15 +999,19 @@
* could get stuck data in the internal pipe:
*/
ret = actor(pipe, sd);
- if (unlikely(ret <= 0))
+ if (unlikely(ret <= 0)) {
+ sd->pos = prev_pos;
goto out_release;
+ }
bytes += ret;
len -= ret;
sd->pos = pos;
- if (ret < read_len)
+ if (ret < read_len) {
+ sd->pos = prev_pos + ret;
goto out_release;
+ }
}
done:
@@ -1072,7 +1077,7 @@
ret = splice_direct_to_actor(in, &sd, direct_splice_actor);
if (ret > 0)
- *ppos += ret;
+ *ppos = sd.pos;
return ret;
}
diff --git a/fs/sysfs/dir.c b/fs/sysfs/dir.c
index a1c3a1f..8c0e4b9 100644
--- a/fs/sysfs/dir.c
+++ b/fs/sysfs/dir.c
@@ -419,12 +419,8 @@
*/
int sysfs_add_one(struct sysfs_addrm_cxt *acxt, struct sysfs_dirent *sd)
{
- if (sysfs_find_dirent(acxt->parent_sd, sd->s_name)) {
- printk(KERN_WARNING "sysfs: duplicate filename '%s' "
- "can not be created\n", sd->s_name);
- WARN_ON(1);
+ if (sysfs_find_dirent(acxt->parent_sd, sd->s_name))
return -EEXIST;
- }
sd->s_parent = sysfs_get(acxt->parent_sd);
diff --git a/fs/ufs/ufs.h b/fs/ufs/ufs.h
index 244a1aa..11c0351 100644
--- a/fs/ufs/ufs.h
+++ b/fs/ufs/ufs.h
@@ -107,7 +107,6 @@
/* inode.c */
extern struct inode *ufs_iget(struct super_block *, unsigned long);
-extern void ufs_put_inode (struct inode *);
extern int ufs_write_inode (struct inode *, int);
extern int ufs_sync_inode (struct inode *);
extern void ufs_delete_inode (struct inode *);
diff --git a/fs/xfs/linux-2.6/xfs_buf.c b/fs/xfs/linux-2.6/xfs_buf.c
index 5105015..98e0e86 100644
--- a/fs/xfs/linux-2.6/xfs_buf.c
+++ b/fs/xfs/linux-2.6/xfs_buf.c
@@ -387,6 +387,8 @@
if (unlikely(page == NULL)) {
if (flags & XBF_READ_AHEAD) {
bp->b_page_count = i;
+ for (i = 0; i < bp->b_page_count; i++)
+ unlock_page(bp->b_pages[i]);
return -ENOMEM;
}
@@ -416,17 +418,24 @@
ASSERT(!PagePrivate(page));
if (!PageUptodate(page)) {
page_count--;
- if (blocksize < PAGE_CACHE_SIZE && !PagePrivate(page)) {
+ if (blocksize >= PAGE_CACHE_SIZE) {
+ if (flags & XBF_READ)
+ bp->b_flags |= _XBF_PAGE_LOCKED;
+ } else if (!PagePrivate(page)) {
if (test_page_region(page, offset, nbytes))
page_count++;
}
}
- unlock_page(page);
bp->b_pages[i] = page;
offset = 0;
}
+ if (!(bp->b_flags & _XBF_PAGE_LOCKED)) {
+ for (i = 0; i < bp->b_page_count; i++)
+ unlock_page(bp->b_pages[i]);
+ }
+
if (page_count == bp->b_page_count)
bp->b_flags |= XBF_DONE;
@@ -746,6 +755,7 @@
bp->b_count_desired = len;
bp->b_buffer_length = buflen;
bp->b_flags |= XBF_MAPPED;
+ bp->b_flags &= ~_XBF_PAGE_LOCKED;
return 0;
}
@@ -1093,8 +1103,10 @@
xfs_buf_t *bp,
int schedule)
{
- if (atomic_dec_and_test(&bp->b_io_remaining) == 1)
+ if (atomic_dec_and_test(&bp->b_io_remaining) == 1) {
+ bp->b_flags &= ~_XBF_PAGE_LOCKED;
xfs_buf_ioend(bp, schedule);
+ }
}
STATIC void
@@ -1125,6 +1137,9 @@
if (--bvec >= bio->bi_io_vec)
prefetchw(&bvec->bv_page->flags);
+
+ if (bp->b_flags & _XBF_PAGE_LOCKED)
+ unlock_page(page);
} while (bvec >= bio->bi_io_vec);
_xfs_buf_ioend(bp, 1);
@@ -1163,7 +1178,8 @@
* filesystem block size is not smaller than the page size.
*/
if ((bp->b_buffer_length < PAGE_CACHE_SIZE) &&
- (bp->b_flags & XBF_READ) &&
+ ((bp->b_flags & (XBF_READ|_XBF_PAGE_LOCKED)) ==
+ (XBF_READ|_XBF_PAGE_LOCKED)) &&
(blocksize >= PAGE_CACHE_SIZE)) {
bio = bio_alloc(GFP_NOIO, 1);
diff --git a/fs/xfs/linux-2.6/xfs_buf.h b/fs/xfs/linux-2.6/xfs_buf.h
index 841d788..f948ec7 100644
--- a/fs/xfs/linux-2.6/xfs_buf.h
+++ b/fs/xfs/linux-2.6/xfs_buf.h
@@ -66,6 +66,25 @@
_XBF_PAGES = (1 << 18), /* backed by refcounted pages */
_XBF_RUN_QUEUES = (1 << 19),/* run block device task queue */
_XBF_DELWRI_Q = (1 << 21), /* buffer on delwri queue */
+
+ /*
+ * Special flag for supporting metadata blocks smaller than a FSB.
+ *
+ * In this case we can have multiple xfs_buf_t on a single page and
+ * need to lock out concurrent xfs_buf_t readers as they only
+ * serialise access to the buffer.
+ *
+ * If the FSB size >= PAGE_CACHE_SIZE case, we have no serialisation
+ * between reads of the page. Hence we can have one thread read the
+ * page and modify it, but then race with another thread that thinks
+ * the page is not up-to-date and hence reads it again.
+ *
+ * The result is that the first modifcation to the page is lost.
+ * This sort of AGF/AGI reading race can happen when unlinking inodes
+ * that require truncation and results in the AGI unlinked list
+ * modifications being lost.
+ */
+ _XBF_PAGE_LOCKED = (1 << 22),
} xfs_buf_flags_t;
typedef enum {
diff --git a/fs/xfs/linux-2.6/xfs_file.c b/fs/xfs/linux-2.6/xfs_file.c
index 65e78c1..5f60363 100644
--- a/fs/xfs/linux-2.6/xfs_file.c
+++ b/fs/xfs/linux-2.6/xfs_file.c
@@ -184,19 +184,24 @@
return -xfs_release(XFS_I(inode));
}
+/*
+ * We ignore the datasync flag here because a datasync is effectively
+ * identical to an fsync. That is, datasync implies that we need to write
+ * only the metadata needed to be able to access the data that is written
+ * if we crash after the call completes. Hence if we are writing beyond
+ * EOF we have to log the inode size change as well, which makes it a
+ * full fsync. If we don't write beyond EOF, the inode core will be
+ * clean in memory and so we don't need to log the inode, just like
+ * fsync.
+ */
STATIC int
xfs_file_fsync(
struct file *filp,
struct dentry *dentry,
int datasync)
{
- int flags = FSYNC_WAIT;
-
- if (datasync)
- flags |= FSYNC_DATA;
xfs_iflags_clear(XFS_I(dentry->d_inode), XFS_ITRUNCATED);
- return -xfs_fsync(XFS_I(dentry->d_inode), flags,
- (xfs_off_t)0, (xfs_off_t)-1);
+ return -xfs_fsync(XFS_I(dentry->d_inode));
}
/*
diff --git a/fs/xfs/linux-2.6/xfs_vnode.h b/fs/xfs/linux-2.6/xfs_vnode.h
index 9d73cb5..25eb2a9 100644
--- a/fs/xfs/linux-2.6/xfs_vnode.h
+++ b/fs/xfs/linux-2.6/xfs_vnode.h
@@ -230,14 +230,6 @@
#define ATTR_NOSIZETOK 0x400 /* Don't get the SIZE token */
/*
- * Flags to vop_fsync/reclaim.
- */
-#define FSYNC_NOWAIT 0 /* asynchronous flush */
-#define FSYNC_WAIT 0x1 /* synchronous fsync or forced reclaim */
-#define FSYNC_INVAL 0x2 /* flush and invalidate cached data */
-#define FSYNC_DATA 0x4 /* synchronous fsync of data only */
-
-/*
* Tracking vnode activity.
*/
#if defined(XFS_INODE_TRACE)
diff --git a/fs/xfs/xfs_inode.c b/fs/xfs/xfs_inode.c
index cf0bb9c..e569bf5 100644
--- a/fs/xfs/xfs_inode.c
+++ b/fs/xfs/xfs_inode.c
@@ -2974,6 +2974,7 @@
xfs_mount_t *mp = ip->i_mount;
xfs_perag_t *pag = xfs_get_perag(mp, ip->i_ino);
unsigned long first_index, mask;
+ unsigned long inodes_per_cluster;
int ilist_size;
xfs_inode_t **ilist;
xfs_inode_t *iq;
@@ -2985,8 +2986,9 @@
ASSERT(pag->pagi_inodeok);
ASSERT(pag->pag_ici_init);
- ilist_size = XFS_INODE_CLUSTER_SIZE(mp) * sizeof(xfs_inode_t *);
- ilist = kmem_alloc(ilist_size, KM_MAYFAIL);
+ inodes_per_cluster = XFS_INODE_CLUSTER_SIZE(mp) >> mp->m_sb.sb_inodelog;
+ ilist_size = inodes_per_cluster * sizeof(xfs_inode_t *);
+ ilist = kmem_alloc(ilist_size, KM_MAYFAIL|KM_NOFS);
if (!ilist)
return 0;
@@ -2995,8 +2997,7 @@
read_lock(&pag->pag_ici_lock);
/* really need a gang lookup range call here */
nr_found = radix_tree_gang_lookup(&pag->pag_ici_root, (void**)ilist,
- first_index,
- XFS_INODE_CLUSTER_SIZE(mp));
+ first_index, inodes_per_cluster);
if (nr_found == 0)
goto out_free;
diff --git a/fs/xfs/xfs_vnodeops.c b/fs/xfs/xfs_vnodeops.c
index 70702a6..e475e37 100644
--- a/fs/xfs/xfs_vnodeops.c
+++ b/fs/xfs/xfs_vnodeops.c
@@ -856,18 +856,14 @@
/*
* xfs_fsync
*
- * This is called to sync the inode and its data out to disk.
- * We need to hold the I/O lock while flushing the data, and
- * the inode lock while flushing the inode. The inode lock CANNOT
- * be held while flushing the data, so acquire after we're done
- * with that.
+ * This is called to sync the inode and its data out to disk. We need to hold
+ * the I/O lock while flushing the data, and the inode lock while flushing the
+ * inode. The inode lock CANNOT be held while flushing the data, so acquire
+ * after we're done with that.
*/
int
xfs_fsync(
- xfs_inode_t *ip,
- int flag,
- xfs_off_t start,
- xfs_off_t stop)
+ xfs_inode_t *ip)
{
xfs_trans_t *tp;
int error;
@@ -875,103 +871,79 @@
xfs_itrace_entry(ip);
- ASSERT(start >= 0 && stop >= -1);
-
if (XFS_FORCED_SHUTDOWN(ip->i_mount))
return XFS_ERROR(EIO);
- if (flag & FSYNC_DATA)
- filemap_fdatawait(vn_to_inode(XFS_ITOV(ip))->i_mapping);
+ /* capture size updates in I/O completion before writing the inode. */
+ error = filemap_fdatawait(vn_to_inode(XFS_ITOV(ip))->i_mapping);
+ if (error)
+ return XFS_ERROR(error);
/*
- * We always need to make sure that the required inode state
- * is safe on disk. The vnode might be clean but because
- * of committed transactions that haven't hit the disk yet.
- * Likewise, there could be unflushed non-transactional
- * changes to the inode core that have to go to disk.
+ * We always need to make sure that the required inode state is safe on
+ * disk. The vnode might be clean but we still might need to force the
+ * log because of committed transactions that haven't hit the disk yet.
+ * Likewise, there could be unflushed non-transactional changes to the
+ * inode core that have to go to disk and this requires us to issue
+ * a synchronous transaction to capture these changes correctly.
*
- * The following code depends on one assumption: that
- * any transaction that changes an inode logs the core
- * because it has to change some field in the inode core
- * (typically nextents or nblocks). That assumption
- * implies that any transactions against an inode will
- * catch any non-transactional updates. If inode-altering
- * transactions exist that violate this assumption, the
- * code breaks. Right now, it figures that if the involved
- * update_* field is clear and the inode is unpinned, the
- * inode is clean. Either it's been flushed or it's been
- * committed and the commit has hit the disk unpinning the inode.
- * (Note that xfs_inode_item_format() called at commit clears
- * the update_* fields.)
+ * This code relies on the assumption that if the update_* fields
+ * of the inode are clear and the inode is unpinned then it is clean
+ * and no action is required.
*/
xfs_ilock(ip, XFS_ILOCK_SHARED);
- /* If we are flushing data then we care about update_size
- * being set, otherwise we care about update_core
- */
- if ((flag & FSYNC_DATA) ?
- (ip->i_update_size == 0) :
- (ip->i_update_core == 0)) {
+ if (!(ip->i_update_size || ip->i_update_core)) {
/*
- * Timestamps/size haven't changed since last inode
- * flush or inode transaction commit. That means
- * either nothing got written or a transaction
- * committed which caught the updates. If the
- * latter happened and the transaction hasn't
- * hit the disk yet, the inode will be still
- * be pinned. If it is, force the log.
+ * Timestamps/size haven't changed since last inode flush or
+ * inode transaction commit. That means either nothing got
+ * written or a transaction committed which caught the updates.
+ * If the latter happened and the transaction hasn't hit the
+ * disk yet, the inode will be still be pinned. If it is,
+ * force the log.
*/
xfs_iunlock(ip, XFS_ILOCK_SHARED);
if (xfs_ipincount(ip)) {
- _xfs_log_force(ip->i_mount, (xfs_lsn_t)0,
- XFS_LOG_FORCE |
- ((flag & FSYNC_WAIT)
- ? XFS_LOG_SYNC : 0),
+ error = _xfs_log_force(ip->i_mount, (xfs_lsn_t)0,
+ XFS_LOG_FORCE | XFS_LOG_SYNC,
&log_flushed);
} else {
/*
- * If the inode is not pinned and nothing
- * has changed we don't need to flush the
- * cache.
+ * If the inode is not pinned and nothing has changed
+ * we don't need to flush the cache.
*/
changed = 0;
}
- error = 0;
} else {
/*
- * Kick off a transaction to log the inode
- * core to get the updates. Make it
- * sync if FSYNC_WAIT is passed in (which
- * is done by everybody but specfs). The
- * sync transaction will also force the log.
+ * Kick off a transaction to log the inode core to get the
+ * updates. The sync transaction will also force the log.
*/
xfs_iunlock(ip, XFS_ILOCK_SHARED);
tp = xfs_trans_alloc(ip->i_mount, XFS_TRANS_FSYNC_TS);
- if ((error = xfs_trans_reserve(tp, 0,
- XFS_FSYNC_TS_LOG_RES(ip->i_mount),
- 0, 0, 0))) {
+ error = xfs_trans_reserve(tp, 0,
+ XFS_FSYNC_TS_LOG_RES(ip->i_mount), 0, 0, 0);
+ if (error) {
xfs_trans_cancel(tp, 0);
return error;
}
xfs_ilock(ip, XFS_ILOCK_EXCL);
/*
- * Note - it's possible that we might have pushed
- * ourselves out of the way during trans_reserve
- * which would flush the inode. But there's no
- * guarantee that the inode buffer has actually
- * gone out yet (it's delwri). Plus the buffer
- * could be pinned anyway if it's part of an
- * inode in another recent transaction. So we
- * play it safe and fire off the transaction anyway.
+ * Note - it's possible that we might have pushed ourselves out
+ * of the way during trans_reserve which would flush the inode.
+ * But there's no guarantee that the inode buffer has actually
+ * gone out yet (it's delwri). Plus the buffer could be pinned
+ * anyway if it's part of an inode in another recent
+ * transaction. So we play it safe and fire off the
+ * transaction anyway.
*/
xfs_trans_ijoin(tp, ip, XFS_ILOCK_EXCL);
xfs_trans_ihold(tp, ip);
xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE);
- if (flag & FSYNC_WAIT)
- xfs_trans_set_sync(tp);
+ xfs_trans_set_sync(tp);
error = _xfs_trans_commit(tp, 0, &log_flushed);
xfs_iunlock(ip, XFS_ILOCK_EXCL);
diff --git a/fs/xfs/xfs_vnodeops.h b/fs/xfs/xfs_vnodeops.h
index 8abe8f1..57335ba 100644
--- a/fs/xfs/xfs_vnodeops.h
+++ b/fs/xfs/xfs_vnodeops.h
@@ -18,8 +18,7 @@
int xfs_setattr(struct xfs_inode *ip, struct bhv_vattr *vap, int flags,
struct cred *credp);
int xfs_readlink(struct xfs_inode *ip, char *link);
-int xfs_fsync(struct xfs_inode *ip, int flag, xfs_off_t start,
- xfs_off_t stop);
+int xfs_fsync(struct xfs_inode *ip);
int xfs_release(struct xfs_inode *ip);
int xfs_inactive(struct xfs_inode *ip);
int xfs_lookup(struct xfs_inode *dp, struct xfs_name *name,
diff --git a/include/acpi/processor.h b/include/acpi/processor.h
index 06480bc..06ebb6e 100644
--- a/include/acpi/processor.h
+++ b/include/acpi/processor.h
@@ -319,6 +319,7 @@
#endif /* CONFIG_CPU_FREQ */
/* in processor_throttling.c */
+int acpi_processor_tstate_has_changed(struct acpi_processor *pr);
int acpi_processor_get_throttling_info(struct acpi_processor *pr);
extern int acpi_processor_set_throttling(struct acpi_processor *pr, int state);
extern struct file_operations acpi_processor_throttling_fops;
diff --git a/include/asm-alpha/barrier.h b/include/asm-alpha/barrier.h
index 384dc08d..ac78eba 100644
--- a/include/asm-alpha/barrier.h
+++ b/include/asm-alpha/barrier.h
@@ -24,7 +24,7 @@
#define smp_mb() barrier()
#define smp_rmb() barrier()
#define smp_wmb() barrier()
-#define smp_read_barrier_depends() barrier()
+#define smp_read_barrier_depends() do { } while (0)
#endif
#define set_mb(var, value) \
diff --git a/include/asm-alpha/param.h b/include/asm-alpha/param.h
index 0982f1d..e691ecf 100644
--- a/include/asm-alpha/param.h
+++ b/include/asm-alpha/param.h
@@ -5,8 +5,12 @@
hardware ignores reprogramming. We also need userland buy-in to the
change in HZ, since this is visible in the wait4 resources etc. */
+#ifdef __KERNEL__
#define HZ CONFIG_HZ
#define USER_HZ HZ
+#else
+#define HZ 1024
+#endif
#define EXEC_PAGESIZE 8192
diff --git a/include/asm-alpha/pgtable.h b/include/asm-alpha/pgtable.h
index 05ce5fb..3f0c59f6 100644
--- a/include/asm-alpha/pgtable.h
+++ b/include/asm-alpha/pgtable.h
@@ -287,17 +287,34 @@
#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1))
#define pgd_offset(mm, address) ((mm)->pgd+pgd_index(address))
+/*
+ * The smp_read_barrier_depends() in the following functions are required to
+ * order the load of *dir (the pointer in the top level page table) with any
+ * subsequent load of the returned pmd_t *ret (ret is data dependent on *dir).
+ *
+ * If this ordering is not enforced, the CPU might load an older value of
+ * *ret, which may be uninitialized data. See mm/memory.c:__pte_alloc for
+ * more details.
+ *
+ * Note that we never change the mm->pgd pointer after the task is running, so
+ * pgd_offset does not require such a barrier.
+ */
+
/* Find an entry in the second-level page table.. */
extern inline pmd_t * pmd_offset(pgd_t * dir, unsigned long address)
{
- return (pmd_t *) pgd_page_vaddr(*dir) + ((address >> PMD_SHIFT) & (PTRS_PER_PAGE - 1));
+ pmd_t *ret = (pmd_t *) pgd_page_vaddr(*dir) + ((address >> PMD_SHIFT) & (PTRS_PER_PAGE - 1));
+ smp_read_barrier_depends(); /* see above */
+ return ret;
}
/* Find an entry in the third-level page table.. */
extern inline pte_t * pte_offset_kernel(pmd_t * dir, unsigned long address)
{
- return (pte_t *) pmd_page_vaddr(*dir)
+ pte_t *ret = (pte_t *) pmd_page_vaddr(*dir)
+ ((address >> PAGE_SHIFT) & (PTRS_PER_PAGE - 1));
+ smp_read_barrier_depends(); /* see above */
+ return ret;
}
#define pte_offset_map(dir,addr) pte_offset_kernel((dir),(addr))
diff --git a/include/asm-arm/arch-at91/io.h b/include/asm-arm/arch-at91/io.h
index 80073fd..f8beaa2 100644
--- a/include/asm-arm/arch-at91/io.h
+++ b/include/asm-arm/arch-at91/io.h
@@ -21,8 +21,6 @@
#ifndef __ASM_ARCH_IO_H
#define __ASM_ARCH_IO_H
-#include <asm/io.h>
-
#define IO_SPACE_LIMIT 0xFFFFFFFF
#define __io(a) ((void __iomem *)(a))
diff --git a/include/asm-arm/arch-omap/board-palmte.h b/include/asm-arm/arch-omap/board-palmte.h
index cd22035..6fac2c8 100644
--- a/include/asm-arm/arch-omap/board-palmte.h
+++ b/include/asm-arm/arch-omap/board-palmte.h
@@ -14,8 +14,6 @@
#ifndef __OMAP_BOARD_PALMTE_H
#define __OMAP_BOARD_PALMTE_H
-#include <asm/arch/gpio.h>
-
#define PALMTE_USBDETECT_GPIO 0
#define PALMTE_USB_OR_DC_GPIO 1
#define PALMTE_TSC_GPIO 4
diff --git a/include/asm-arm/arch-omap/clock.h b/include/asm-arm/arch-omap/clock.h
index 57523bd..12a5e4d 100644
--- a/include/asm-arm/arch-omap/clock.h
+++ b/include/asm-arm/arch-omap/clock.h
@@ -73,6 +73,8 @@
#endif
};
+struct cpufreq_frequency_table;
+
struct clk_functions {
int (*clk_enable)(struct clk *clk);
void (*clk_disable)(struct clk *clk);
@@ -83,6 +85,9 @@
void (*clk_allow_idle)(struct clk *clk);
void (*clk_deny_idle)(struct clk *clk);
void (*clk_disable_unused)(struct clk *clk);
+#ifdef CONFIG_CPU_FREQ
+ void (*clk_init_cpufreq_table)(struct cpufreq_frequency_table **);
+#endif
};
extern unsigned int mpurate;
diff --git a/include/asm-arm/arch-omap/common.h b/include/asm-arm/arch-omap/common.h
index 224e009..36a3b62 100644
--- a/include/asm-arm/arch-omap/common.h
+++ b/include/asm-arm/arch-omap/common.h
@@ -47,4 +47,8 @@
}
#endif
+void omap2_set_globals_242x(void);
+void omap2_set_globals_243x(void);
+void omap2_set_globals_343x(void);
+
#endif /* __ARCH_ARM_MACH_OMAP_COMMON_H */
diff --git a/include/asm-arm/arch-omap/control.h b/include/asm-arm/arch-omap/control.h
index 9944bb5..59c0686 100644
--- a/include/asm-arm/arch-omap/control.h
+++ b/include/asm-arm/arch-omap/control.h
@@ -80,7 +80,7 @@
#define OMAP24XX_CONTROL_SEC_TAP (OMAP2_CONTROL_GENERAL + 0x0064)
#define OMAP24XX_CONTROL_OCM_PUB_RAM_ADD (OMAP2_CONTROL_GENERAL + 0x006c)
#define OMAP24XX_CONTROL_EXT_SEC_RAM_START_ADD (OMAP2_CONTROL_GENERAL + 0x0070)
-#define OMAP24XX_CONTROL_EXT_SEC_RAM_STOP_ADD (OMAP2_CONTROL_GENERAL + 0x0074
+#define OMAP24XX_CONTROL_EXT_SEC_RAM_STOP_ADD (OMAP2_CONTROL_GENERAL + 0x0074)
#define OMAP24XX_CONTROL_SEC_STATUS (OMAP2_CONTROL_GENERAL + 0x0080)
#define OMAP24XX_CONTROL_SEC_ERR_STATUS (OMAP2_CONTROL_GENERAL + 0x0084)
#define OMAP24XX_CONTROL_STATUS (OMAP2_CONTROL_GENERAL + 0x0088)
diff --git a/include/asm-arm/arch-omap/entry-macro.S b/include/asm-arm/arch-omap/entry-macro.S
index 74cd572..369093a 100644
--- a/include/asm-arm/arch-omap/entry-macro.S
+++ b/include/asm-arm/arch-omap/entry-macro.S
@@ -8,6 +8,7 @@
* warranty of any kind, whether express or implied.
*/
#include <asm/hardware.h>
+#include <asm/arch/io.h>
#include <asm/arch/irqs.h>
#if defined(CONFIG_ARCH_OMAP1)
diff --git a/include/asm-arm/arch-omap/gpio.h b/include/asm-arm/arch-omap/gpio.h
index 86621a0..5ee6a49 100644
--- a/include/asm-arm/arch-omap/gpio.h
+++ b/include/asm-arm/arch-omap/gpio.h
@@ -26,7 +26,6 @@
#ifndef __ASM_ARCH_OMAP_GPIO_H
#define __ASM_ARCH_OMAP_GPIO_H
-#include <asm/hardware.h>
#include <asm/arch/irqs.h>
#include <asm/io.h>
diff --git a/include/asm-arm/arch-omap/hardware.h b/include/asm-arm/arch-omap/hardware.h
index da57209..91d85b3 100644
--- a/include/asm-arm/arch-omap/hardware.h
+++ b/include/asm-arm/arch-omap/hardware.h
@@ -41,7 +41,6 @@
#include <asm/types.h>
#include <asm/arch/cpu.h>
#endif
-#include <asm/arch/io.h>
#include <asm/arch/serial.h>
/*
diff --git a/include/asm-arm/arch-omap/mmc.h b/include/asm-arm/arch-omap/mmc.h
index c9588f4..7cfc5f2 100644
--- a/include/asm-arm/arch-omap/mmc.h
+++ b/include/asm-arm/arch-omap/mmc.h
@@ -15,21 +15,16 @@
#include <linux/device.h>
#include <linux/mmc/host.h>
+#include <asm/arch/board.h>
+
#define OMAP_MMC_MAX_SLOTS 2
struct omap_mmc_platform_data {
struct omap_mmc_conf conf;
- unsigned enabled:1;
/* number of slots on board */
unsigned nr_slots:2;
- /* nomux means "standard" muxing is wrong on this board, and that
- * board-specific code handled it before common init logic.
- */
- unsigned nomux:1;
- /* 4 wire signaling is optional, and is only used for SD/SDIO and
- * MMCv4 */
- unsigned wire4:1;
+
/* set if your board has components or wiring that limits the
* maximum frequency on the MMC bus */
unsigned int max_freq;
@@ -40,6 +35,11 @@
* not supported */
int (* init)(struct device *dev);
void (* cleanup)(struct device *dev);
+ void (* shutdown)(struct device *dev);
+
+ /* To handle board related suspend/resume functionality for MMC */
+ int (*suspend)(struct device *dev, int slot);
+ int (*resume)(struct device *dev, int slot);
struct omap_mmc_slot_data {
int (* set_bus_mode)(struct device *dev, int slot, int bus_mode);
@@ -56,13 +56,19 @@
const char *name;
u32 ocr_mask;
+
+ /* Card detection IRQs */
+ int card_detect_irq;
+ int (* card_detect)(int irq);
+
+ unsigned int ban_openended:1;
+
} slots[OMAP_MMC_MAX_SLOTS];
};
extern void omap_set_mmc_info(int host, const struct omap_mmc_platform_data *info);
/* called from board-specific card detection service routine */
-extern void omap_mmc_notify_card_detect(struct device *dev, int slot, int detected);
extern void omap_mmc_notify_cover_event(struct device *dev, int slot, int is_closed);
#endif
diff --git a/include/asm-arm/arch-pxa/mfp-pxa27x.h b/include/asm-arm/arch-pxa/mfp-pxa27x.h
index eb6eaa1..bc73ab8 100644
--- a/include/asm-arm/arch-pxa/mfp-pxa27x.h
+++ b/include/asm-arm/arch-pxa/mfp-pxa27x.h
@@ -112,6 +112,7 @@
#define GPIO57_nIOIS16 MFP_CFG_IN(GPIO57, AF1)
#define GPIO56_nPWAIT MFP_CFG_IN(GPIO56, AF1)
#define GPIO79_PSKTSEL MFP_CFG_OUT(GPIO79, AF1, DRIVE_HIGH)
+#define GPIO104_PSKTSEL MFP_CFG_OUT(GPIO104, AF1, DRIVE_HIGH)
/* I2C */
#define GPIO117_I2C_SCL MFP_CFG_IN(GPIO117, AF1)
diff --git a/include/asm-arm/arch-pxa/pxa2xx-gpio.h b/include/asm-arm/arch-pxa/pxa2xx-gpio.h
index 763313c..b81cd63 100644
--- a/include/asm-arm/arch-pxa/pxa2xx-gpio.h
+++ b/include/asm-arm/arch-pxa/pxa2xx-gpio.h
@@ -134,7 +134,11 @@
#define GPIO93_CIF_DD_6 93 /* Camera data pin 6 */
#define GPIO94_CIF_DD_5 94 /* Camera data pin 5 */
#define GPIO95_CIF_DD_4 95 /* Camera data pin 4 */
+#define GPIO96_FFRXD 96 /* FFUART recieve */
+#define GPIO98_FFRTS 98 /* FFUART request to send */
#define GPIO98_CIF_DD_0 98 /* Camera data pin 0 */
+#define GPIO99_FFTXD 99 /* FFUART transmit data */
+#define GPIO100_FFCTS 100 /* FFUART Clear to send */
#define GPIO102_nPCE_1 102 /* PCMCIA (PXA27x) */
#define GPIO103_CIF_DD_3 103 /* Camera data pin 3 */
#define GPIO104_CIF_DD_2 104 /* Camera data pin 2 */
@@ -316,6 +320,8 @@
#define GPIO85_nPCE_1_MD (85 | GPIO_ALT_FN_1_OUT)
#define GPIO85_CIF_LV_MD (85 | GPIO_ALT_FN_3_IN)
#define GPIO86_nPCE_1_MD (86 | GPIO_ALT_FN_1_OUT)
+#define GPIO88_USBH1_PWR_MD (88 | GPIO_ALT_FN_1_IN)
+#define GPIO89_USBH1_PEN_MD (89 | GPIO_ALT_FN_2_OUT)
#define GPIO90_CIF_DD_4_MD (90 | GPIO_ALT_FN_3_IN)
#define GPIO91_CIF_DD_5_MD (91 | GPIO_ALT_FN_3_IN)
#define GPIO92_MMCDAT0_MD (92 | GPIO_ALT_FN_1_OUT)
@@ -324,8 +330,11 @@
#define GPIO95_CIF_DD_4_MD (95 | GPIO_ALT_FN_2_IN)
#define GPIO95_KP_MKIN6_MD (95 | GPIO_ALT_FN_3_IN)
#define GPIO96_KP_DKIN3_MD (96 | GPIO_ALT_FN_1_IN)
+#define GPIO96_FFRXD_MD (96 | GPIO_ALT_FN_3_IN)
#define GPIO97_KP_MKIN3_MD (97 | GPIO_ALT_FN_3_IN)
#define GPIO98_CIF_DD_0_MD (98 | GPIO_ALT_FN_2_IN)
+#define GPIO98_FFRTS_MD (98 | GPIO_ALT_FN_3_OUT)
+#define GPIO99_FFTXD_MD (99 | GPIO_ALT_FN_3_OUT)
#define GPIO100_KP_MKIN0_MD (100 | GPIO_ALT_FN_1_IN)
#define GPIO101_KP_MKIN1_MD (101 | GPIO_ALT_FN_1_IN)
#define GPIO102_nPCE_1_MD (102 | GPIO_ALT_FN_1_OUT)
diff --git a/include/asm-arm/arch-pxa/regs-lcd.h b/include/asm-arm/arch-pxa/regs-lcd.h
index f762493..3ba464c9 100644
--- a/include/asm-arm/arch-pxa/regs-lcd.h
+++ b/include/asm-arm/arch-pxa/regs-lcd.h
@@ -1,5 +1,8 @@
#ifndef __ASM_ARCH_REGS_LCD_H
#define __ASM_ARCH_REGS_LCD_H
+
+#include <asm/arch/bitfield.h>
+
/*
* LCD Controller Registers and Bits Definitions
*/
@@ -69,7 +72,7 @@
#define LCCR0_QDM (1 << 11) /* LCD Quick Disable mask */
#define LCCR0_PDD (0xff << 12) /* Palette DMA request delay */
#define LCCR0_PDD_S 12
-#define LCCR0_BM (1 << 20) /* Branch mask */
+#define LCCR0_BM (1 << 20) /* Branch mask */
#define LCCR0_OUM (1 << 21) /* Output FIFO underrun mask */
#define LCCR0_LCDT (1 << 22) /* LCD panel type */
#define LCCR0_RDSTM (1 << 23) /* Read status interrupt mask */
diff --git a/include/asm-arm/arch-sa1100/collie.h b/include/asm-arm/arch-sa1100/collie.h
index 14a344a..762eba53 100644
--- a/include/asm-arm/arch-sa1100/collie.h
+++ b/include/asm-arm/arch-sa1100/collie.h
@@ -34,9 +34,12 @@
#define COLLIE_GPIO_ON_KEY GPIO_GPIO (0)
#define COLLIE_GPIO_AC_IN GPIO_GPIO (1)
+#define COLLIE_GPIO_SDIO_INT GPIO_GPIO (11)
#define COLLIE_GPIO_CF_IRQ GPIO_GPIO (14)
#define COLLIE_GPIO_nREMOCON_INT GPIO_GPIO (15)
#define COLLIE_GPIO_UCB1x00_RESET GPIO_GPIO (16)
+#define COLLIE_GPIO_nMIC_ON GPIO_GPIO (17)
+#define COLLIE_GPIO_nREMOCON_ON GPIO_GPIO (18)
#define COLLIE_GPIO_CO GPIO_GPIO (20)
#define COLLIE_GPIO_MCP_CLK GPIO_GPIO (21)
#define COLLIE_GPIO_CF_CD GPIO_GPIO (22)
@@ -49,6 +52,7 @@
#define COLLIE_IRQ_GPIO_ON_KEY IRQ_GPIO0
#define COLLIE_IRQ_GPIO_AC_IN IRQ_GPIO1
+#define COLLIE_IRQ_GPIO_SDIO_IRQ IRQ_GPIO11
#define COLLIE_IRQ_GPIO_CF_IRQ IRQ_GPIO14
#define COLLIE_IRQ_GPIO_nREMOCON_INT IRQ_GPIO15
#define COLLIE_IRQ_GPIO_CO IRQ_GPIO20
diff --git a/include/asm-arm/arch-sa1100/irqs.h b/include/asm-arm/arch-sa1100/irqs.h
index d794068..7bf8048 100644
--- a/include/asm-arm/arch-sa1100/irqs.h
+++ b/include/asm-arm/arch-sa1100/irqs.h
@@ -141,7 +141,7 @@
#define IRQ_LOCOMO_LT (IRQ_BOARD_END + 17)
#define IRQ_LOCOMO_SPI_RFR (IRQ_BOARD_END + 18)
#define IRQ_LOCOMO_SPI_RFW (IRQ_BOARD_END + 19)
-#define IRQ_LOCOMO_SPI_OVRN (IRQ_BOARD_END + 20)
+#define IRQ_LOCOMO_SPI_REND (IRQ_BOARD_END + 20)
#define IRQ_LOCOMO_SPI_TEND (IRQ_BOARD_END + 21)
/*
diff --git a/include/asm-arm/hardware/locomo.h b/include/asm-arm/hardware/locomo.h
index adab777..fb0645d 100644
--- a/include/asm-arm/hardware/locomo.h
+++ b/include/asm-arm/hardware/locomo.h
@@ -58,6 +58,11 @@
#define LOCOMO_SPIMD 0x00 /* SPI mode setting */
#define LOCOMO_SPICT 0x04 /* SPI mode control */
#define LOCOMO_SPIST 0x08 /* SPI status */
+#define LOCOMO_SPI_TEND (1 << 3) /* Transfer end bit */
+#define LOCOMO_SPI_REND (1 << 2) /* Receive end bit */
+#define LOCOMO_SPI_RFW (1 << 1) /* write buffer bit */
+#define LOCOMO_SPI_RFR (1) /* read buffer bit */
+
#define LOCOMO_SPIIS 0x10 /* SPI interrupt status */
#define LOCOMO_SPIWE 0x14 /* SPI interrupt status write enable */
#define LOCOMO_SPIIE 0x18 /* SPI interrupt enable */
@@ -66,16 +71,12 @@
#define LOCOMO_SPIRD 0x24 /* SPI receive data read */
#define LOCOMO_SPITS 0x28 /* SPI transfer data shift */
#define LOCOMO_SPIRS 0x2C /* SPI receive data shift */
-#define LOCOMO_SPI_TEND (1 << 3) /* Transfer end bit */
-#define LOCOMO_SPI_OVRN (1 << 2) /* Over Run bit */
-#define LOCOMO_SPI_RFW (1 << 1) /* write buffer bit */
-#define LOCOMO_SPI_RFR (1) /* read buffer bit */
/* GPIO */
#define LOCOMO_GPD 0x90 /* GPIO direction */
#define LOCOMO_GPE 0x94 /* GPIO input enable */
#define LOCOMO_GPL 0x98 /* GPIO level */
-#define LOCOMO_GPO 0x9c /* GPIO out data setteing */
+#define LOCOMO_GPO 0x9c /* GPIO out data setting */
#define LOCOMO_GRIE 0xa0 /* GPIO rise detection */
#define LOCOMO_GFIE 0xa4 /* GPIO fall detection */
#define LOCOMO_GIS 0xa8 /* GPIO edge detection status */
@@ -96,6 +97,9 @@
#define LOCOMO_GPIO_DAC_SDATA LOCOMO_GPIO(10)
#define LOCOMO_GPIO_DAC_SCK LOCOMO_GPIO(11)
#define LOCOMO_GPIO_DAC_SLOAD LOCOMO_GPIO(12)
+#define LOCOMO_GPIO_CARD_DETECT LOCOMO_GPIO(13)
+#define LOCOMO_GPIO_WRITE_PROT LOCOMO_GPIO(14)
+#define LOCOMO_GPIO_CARD_POWER LOCOMO_GPIO(15)
/* Start the definitions of the devices. Each device has an initial
* base address and a series of offsets from that base address. */
@@ -122,7 +126,7 @@
/* Audio controller */
#define LOCOMO_AUDIO 0x54
#define LOCOMO_ACC 0x00 /* Audio clock */
-#define LOCOMO_PAIF 0x7C /* PCM audio interface */
+#define LOCOMO_PAIF 0xD0 /* PCM audio interface */
/* Audio clock */
#define LOCOMO_ACC_XON 0x80
#define LOCOMO_ACC_XEN 0x40
@@ -162,7 +166,7 @@
#define LOCOMO_DEVID_AUDIO 3
#define LOCOMO_DEVID_LED 4
#define LOCOMO_DEVID_UART 5
-#define LOCOMO_DEVID_SPI 6
+#define LOCOMO_DEVID_SPI 6
struct locomo_dev {
struct device dev;
@@ -204,7 +208,6 @@
int locomo_gpio_read_output(struct device *dev, unsigned int bits);
void locomo_gpio_write(struct device *dev, unsigned int bits, unsigned int set);
-
/* M62332 control function */
void locomo_m62332_senddata(struct locomo_dev *ldev, unsigned int dac_data, int channel);
diff --git a/include/asm-arm/page.h b/include/asm-arm/page.h
index 5c22b01..8e05bdb 100644
--- a/include/asm-arm/page.h
+++ b/include/asm-arm/page.h
@@ -179,10 +179,10 @@
#endif /* STRICT_MM_TYPECHECKS */
-typedef struct page *pgtable_t;
-
#endif /* CONFIG_MMU */
+typedef struct page *pgtable_t;
+
#include <asm/memory.h>
#endif /* !__ASSEMBLY__ */
diff --git a/include/asm-arm/pgtable-nommu.h b/include/asm-arm/pgtable-nommu.h
index 2e5868b..386fcc1 100644
--- a/include/asm-arm/pgtable-nommu.h
+++ b/include/asm-arm/pgtable-nommu.h
@@ -16,7 +16,6 @@
#include <linux/slab.h>
#include <asm/processor.h>
#include <asm/page.h>
-#include <asm/io.h>
/*
* Trivial page table functions.
diff --git a/include/asm-arm/spinlock.h b/include/asm-arm/spinlock.h
index 800ba52..2b41ebb 100644
--- a/include/asm-arm/spinlock.h
+++ b/include/asm-arm/spinlock.h
@@ -142,7 +142,7 @@
}
/* write_can_lock - would write_trylock() succeed? */
-#define __raw_write_can_lock(x) ((x)->lock == 0x80000000)
+#define __raw_write_can_lock(x) ((x)->lock == 0)
/*
* Read locks are a bit more hairy:
diff --git a/include/asm-arm/system.h b/include/asm-arm/system.h
index 6335de9..514af79 100644
--- a/include/asm-arm/system.h
+++ b/include/asm-arm/system.h
@@ -48,20 +48,6 @@
#define CPUID_TCM 2
#define CPUID_TLBTYPE 3
-#ifdef CONFIG_CPU_CP15
-#define read_cpuid(reg) \
- ({ \
- unsigned int __val; \
- asm("mrc p15, 0, %0, c0, c0, " __stringify(reg) \
- : "=r" (__val) \
- : \
- : "cc"); \
- __val; \
- })
-#else
-#define read_cpuid(reg) (processor_id)
-#endif
-
/*
* This is used to ensure the compiler did actually allocate the register we
* asked it for some inline assembly sequences. Apparently we can't trust
@@ -78,6 +64,21 @@
#include <linux/stringify.h>
#include <linux/irqflags.h>
+#ifdef CONFIG_CPU_CP15
+#define read_cpuid(reg) \
+ ({ \
+ unsigned int __val; \
+ asm("mrc p15, 0, %0, c0, c0, " __stringify(reg) \
+ : "=r" (__val) \
+ : \
+ : "cc"); \
+ __val; \
+ })
+#else
+extern unsigned int processor_id;
+#define read_cpuid(reg) (processor_id)
+#endif
+
/*
* The CPU ID never changes at run time, so we might as well tell the
* compiler that it's constant. Use this function to read the CPU ID
diff --git a/include/asm-blackfin/bfin-global.h b/include/asm-blackfin/bfin-global.h
index 716df7c..7603383 100644
--- a/include/asm-blackfin/bfin-global.h
+++ b/include/asm-blackfin/bfin-global.h
@@ -37,7 +37,9 @@
#include <linux/linkage.h>
#include <linux/types.h>
-#if defined(CONFIG_DMA_UNCACHED_2M)
+#if defined(CONFIG_DMA_UNCACHED_4M)
+# define DMA_UNCACHED_REGION (4 * 1024 * 1024)
+#elif defined(CONFIG_DMA_UNCACHED_2M)
# define DMA_UNCACHED_REGION (2 * 1024 * 1024)
#elif defined(CONFIG_DMA_UNCACHED_1M)
# define DMA_UNCACHED_REGION (1024 * 1024)
@@ -103,13 +105,6 @@
extern void *sram_alloc_with_lsl(size_t, unsigned long);
extern int sram_free_with_lsl(const void*);
-extern void led_on(int);
-extern void led_off(int);
-extern void led_toggle(int);
-extern void led_disp_num(int);
-extern void led_toggle_num(int);
-extern void init_leds(void);
-
extern const char bfin_board_name[];
extern unsigned long wall_jiffies;
diff --git a/include/asm-blackfin/checksum.h b/include/asm-blackfin/checksum.h
index 2638f25..6f6af2b 100644
--- a/include/asm-blackfin/checksum.h
+++ b/include/asm-blackfin/checksum.h
@@ -15,7 +15,7 @@
*
* it's best to have buff aligned on a 32-bit boundary
*/
-unsigned int csum_partial(const unsigned char *buff, int len, unsigned int sum);
+__wsum csum_partial(const void *buff, int len, __wsum sum);
/*
* the same as csum_partial, but copies from src while it
@@ -25,8 +25,8 @@
* better 64-bit) boundary
*/
-unsigned int csum_partial_copy(const unsigned char *src, unsigned char *dst,
- int len, int sum);
+__wsum csum_partial_copy(const void *src, void *dst,
+ int len, __wsum sum);
/*
* the same as csum_partial_copy, but copies from user space.
@@ -35,20 +35,19 @@
* better 64-bit) boundary
*/
-extern unsigned int csum_partial_copy_from_user(const unsigned char *src,
- unsigned char *dst, int len,
- int sum, int *csum_err);
+extern __wsum csum_partial_copy_from_user(const void __user *src, void *dst,
+ int len, __wsum sum, int *csum_err);
#define csum_partial_copy_nocheck(src, dst, len, sum) \
csum_partial_copy((src), (dst), (len), (sum))
-unsigned short ip_fast_csum(unsigned char *iph, unsigned int ihl);
+__sum16 ip_fast_csum(unsigned char *iph, unsigned int ihl);
/*
* Fold a partial checksum
*/
-static inline unsigned int csum_fold(unsigned int sum)
+static inline __sum16 csum_fold(__wsum sum)
{
while (sum >> 16)
sum = (sum & 0xffff) + (sum >> 16);
@@ -60,9 +59,9 @@
* returns a 16-bit checksum, already complemented
*/
-static inline unsigned int
-csum_tcpudp_nofold(unsigned long saddr, unsigned long daddr, unsigned short len,
- unsigned short proto, unsigned int sum)
+static inline __wsum
+csum_tcpudp_nofold(__be32 saddr, __be32 daddr, unsigned short len,
+ unsigned short proto, __wsum sum)
{
__asm__ ("%0 = %0 + %1;\n\t"
@@ -84,9 +83,9 @@
return (sum);
}
-static inline unsigned short int
-csum_tcpudp_magic(unsigned long saddr, unsigned long daddr, unsigned short len,
- unsigned short proto, unsigned int sum)
+static inline __sum16
+csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len,
+ unsigned short proto, __wsum sum)
{
return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum));
}
@@ -96,6 +95,6 @@
* in icmp.c
*/
-extern unsigned short ip_compute_csum(const unsigned char *buff, int len);
+extern __sum16 ip_compute_csum(const void *buff, int len);
#endif /* _BFIN_CHECKSUM_H */
diff --git a/include/asm-blackfin/gpio.h b/include/asm-blackfin/gpio.h
index 27ff532..ff95e9d 100644
--- a/include/asm-blackfin/gpio.h
+++ b/include/asm-blackfin/gpio.h
@@ -437,7 +437,6 @@
int gpio_get_value(unsigned gpio);
#ifndef BF548_FAMILY
-#define gpio_get_value(gpio) get_gpio_data(gpio)
#define gpio_set_value(gpio, value) set_gpio_data(gpio, value)
#endif
diff --git a/include/asm-blackfin/io.h b/include/asm-blackfin/io.h
index 574fe56..cbbf7ff 100644
--- a/include/asm-blackfin/io.h
+++ b/include/asm-blackfin/io.h
@@ -117,10 +117,12 @@
extern void outsb(unsigned long port, const void *addr, unsigned long count);
extern void outsw(unsigned long port, const void *addr, unsigned long count);
+extern void outsw_8(unsigned long port, const void *addr, unsigned long count);
extern void outsl(unsigned long port, const void *addr, unsigned long count);
extern void insb(unsigned long port, void *addr, unsigned long count);
extern void insw(unsigned long port, void *addr, unsigned long count);
+extern void insw_8(unsigned long port, void *addr, unsigned long count);
extern void insl(unsigned long port, void *addr, unsigned long count);
extern void insl_16(unsigned long port, void *addr, unsigned long count);
diff --git a/include/asm-blackfin/mach-bf527/anomaly.h b/include/asm-blackfin/mach-bf527/anomaly.h
index 735fa02..4725268 100644
--- a/include/asm-blackfin/mach-bf527/anomaly.h
+++ b/include/asm-blackfin/mach-bf527/anomaly.h
@@ -15,12 +15,16 @@
/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */
#define ANOMALY_05000074 (1)
+/* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */
+#define ANOMALY_05000119 (1)
/* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */
#define ANOMALY_05000122 (1)
/* Spurious Hardware Error from an Access in the Shadow of a Conditional Branch */
#define ANOMALY_05000245 (1)
/* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */
#define ANOMALY_05000265 (1)
+/* Errors when SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
+#define ANOMALY_05000312 (1)
/* Incorrect Access of OTP_STATUS During otp_write() Function */
#define ANOMALY_05000328 (1)
/* Disallowed Configuration Prevents Subsequent Allowed Configuration on Host DMA Port */
@@ -92,7 +96,6 @@
#define ANOMALY_05000266 (0)
#define ANOMALY_05000273 (0)
#define ANOMALY_05000311 (0)
-#define ANOMALY_05000312 (0)
#define ANOMALY_05000323 (0)
#define ANOMALY_05000363 (0)
diff --git a/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h
index 26e3c80..96bd09e 100644
--- a/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h
+++ b/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h
@@ -53,6 +53,12 @@
#define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
#define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
+#define UART_SET_RTS(x) gpio_set_value(x->rts_pin, 1)
+#define UART_CLEAR_RTS(x) gpio_set_value(x->rts_pin, 0)
+#define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
+#define UART_DISABLE_INTS(x) UART_PUT_IER(x, 0)
+
#if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS)
# define CONFIG_SERIAL_BFIN_CTSRTS
diff --git a/include/asm-blackfin/mach-bf527/blackfin.h b/include/asm-blackfin/mach-bf527/blackfin.h
index 2891727..297821e 100644
--- a/include/asm-blackfin/mach-bf527/blackfin.h
+++ b/include/asm-blackfin/mach-bf527/blackfin.h
@@ -39,22 +39,22 @@
#include "defBF522.h"
#include "anomaly.h"
-#if defined(CONFIG_BF527)
+#if defined(CONFIG_BF527) || defined(CONFIG_BF526)
#include "defBF527.h"
#endif
-#if defined(CONFIG_BF525)
+#if defined(CONFIG_BF525) || defined(CONFIG_BF524)
#include "defBF525.h"
#endif
#if !defined(__ASSEMBLY__)
#include "cdefBF522.h"
-#if defined(CONFIG_BF527)
+#if defined(CONFIG_BF527) || defined(CONFIG_BF526)
#include "cdefBF527.h"
#endif
-#if defined(CONFIG_BF525)
+#if defined(CONFIG_BF525) || defined(CONFIG_BF524)
#include "cdefBF525.h"
#endif
#endif
diff --git a/include/asm-blackfin/mach-bf533/anomaly.h b/include/asm-blackfin/mach-bf533/anomaly.h
index 5a6dcc5..8f7ea11 100644
--- a/include/asm-blackfin/mach-bf533/anomaly.h
+++ b/include/asm-blackfin/mach-bf533/anomaly.h
@@ -2,7 +2,7 @@
* File: include/asm-blackfin/mach-bf533/anomaly.h
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
- * Copyright (C) 2004-2007 Analog Devices Inc.
+ * Copyright (C) 2004-2008 Analog Devices Inc.
* Licensed under the GPL-2 or later.
*/
@@ -176,6 +176,21 @@
#define ANOMALY_05000315 (1)
/* Internal Voltage Regulator Values of 1.05V, 1.10V and 1.15V Not Allowed for LQFP Packages */
#define ANOMALY_05000319 (ANOMALY_BF531 || ANOMALY_BF532)
+/* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */
+#define ANOMALY_05000357 (1)
+/* UART Break Signal Issues */
+#define ANOMALY_05000363 (__SILICON_REVISION__ < 5)
+/* PPI Underflow Error Goes Undetected in ITU-R 656 Mode */
+#define ANOMALY_05000366 (1)
+/* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */
+#define ANOMALY_05000371 (1)
+/* PPI Does Not Start Properly In Specific Mode */
+#define ANOMALY_05000400 (__SILICON_REVISION__ >= 5)
+/* SSYNC Stalls Processor when Executed from Non-Cacheable Memory */
+#define ANOMALY_05000402 (__SILICON_REVISION__ >= 5)
+/* Level-Sensitive External GPIO Wakeups May Cause Indefinite Stall */
+#define ANOMALY_05000403 (1)
+
/* These anomalies have been "phased" out of analog.com anomaly sheets and are
* here to show running on older silicon just isn't feasible.
@@ -249,20 +264,6 @@
#define ANOMALY_05000192 (__SILICON_REVISION__ < 3)
/* Internal Voltage Regulator may not start up */
#define ANOMALY_05000206 (__SILICON_REVISION__ < 3)
-/* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */
-#define ANOMALY_05000357 (1)
-/* UART Break Signal Issues */
-#define ANOMALY_05000363 (__SILICON_REVISION__ < 5)
-/* PPI Underflow Error Goes Undetected in ITU-R 656 Mode */
-#define ANOMALY_05000366 (1)
-/* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */
-#define ANOMALY_05000371 (1)
-/* PPI Does Not Start Properly In Specific Mode */
-#define ANOMALY_05000400 (__SILICON_REVISION__ == 5)
-/* SSYNC Stalls Processor when Executed from Non-Cacheable Memory */
-#define ANOMALY_05000402 (__SILICON_REVISION__ == 5)
-/* Level-Sensitive External GPIO Wakeups May Cause Indefinite Stall */
-#define ANOMALY_05000403 (1)
/* Anomalies that don't exist on this proc */
#define ANOMALY_05000266 (0)
diff --git a/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h
index d016603..e924569 100644
--- a/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h
+++ b/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h
@@ -53,6 +53,12 @@
#define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
#define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
+#define UART_SET_RTS(x) gpio_set_value(x->rts_pin, 1)
+#define UART_CLEAR_RTS(x) gpio_set_value(x->rts_pin, 0)
+#define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
+#define UART_DISABLE_INTS(x) UART_PUT_IER(x, 0)
+
#ifdef CONFIG_BFIN_UART0_CTSRTS
# define CONFIG_SERIAL_BFIN_CTSRTS
# ifndef CONFIG_UART0_CTS_PIN
diff --git a/include/asm-blackfin/mach-bf537/anomaly.h b/include/asm-blackfin/mach-bf537/anomaly.h
index a6b08fa..8460ab9 100644
--- a/include/asm-blackfin/mach-bf537/anomaly.h
+++ b/include/asm-blackfin/mach-bf537/anomaly.h
@@ -2,7 +2,7 @@
* File: include/asm-blackfin/mach-bf537/anomaly.h
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
- * Copyright (C) 2004-2007 Analog Devices Inc.
+ * Copyright (C) 2004-2008 Analog Devices Inc.
* Licensed under the GPL-2 or later.
*/
@@ -132,8 +132,8 @@
#define ANOMALY_05000322 (1)
/* Ethernet MAC MDIO Reads Do Not Meet IEEE Specification */
#define ANOMALY_05000341 (__SILICON_REVISION__ >= 3)
-/* New Feature: UART Remains Enabled after UART Boot (Not Available on Older Silicon) */
-#define ANOMALY_05000350 (__SILICON_REVISION__ < 3)
+/* New Feature: UART Remains Enabled after UART Boot */
+#define ANOMALY_05000350 (__SILICON_REVISION__ >= 3)
/* Regulator Programming Blocked when Hibernate Wakeup Source Remains Active */
#define ANOMALY_05000355 (1)
/* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */
@@ -145,12 +145,10 @@
/* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */
#define ANOMALY_05000371 (1)
/* SSYNC Stalls Processor when Executed from Non-Cacheable Memory */
-#define ANOMALY_05000402 (__SILICON_REVISION__ >= 3)
+#define ANOMALY_05000402 (__SILICON_REVISION__ >= 5)
/* Level-Sensitive External GPIO Wakeups May Cause Indefinite Stall */
#define ANOMALY_05000403 (1)
-
-
/* Anomalies that don't exist on this proc */
#define ANOMALY_05000125 (0)
#define ANOMALY_05000158 (0)
diff --git a/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h
index f79d1a0..41d7b64 100644
--- a/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h
+++ b/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h
@@ -53,6 +53,12 @@
#define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
#define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
+#define UART_SET_RTS(x) gpio_set_value(x->rts_pin, 1)
+#define UART_CLEAR_RTS(x) gpio_set_value(x->rts_pin, 0)
+#define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
+#define UART_DISABLE_INTS(x) UART_PUT_IER(x, 0)
+
#if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS)
# define CONFIG_SERIAL_BFIN_CTSRTS
diff --git a/include/asm-blackfin/mach-bf548/anomaly.h b/include/asm-blackfin/mach-bf548/anomaly.h
index 49d3ceb..3ad5965 100644
--- a/include/asm-blackfin/mach-bf548/anomaly.h
+++ b/include/asm-blackfin/mach-bf548/anomaly.h
@@ -75,6 +75,8 @@
#define ANOMALY_05000365 (1)
/* Addressing Conflict between Boot ROM and Asynchronous Memory */
#define ANOMALY_05000369 (1)
+/* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */
+#define ANOMALY_05000371 (1)
/* Mobile DDR Operation Not Functional */
#define ANOMALY_05000377 (1)
/* Security/Authentication Speedpath Causes Authentication To Fail To Initiate */
diff --git a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h
index 5eb46a7..59b4ad4 100644
--- a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h
+++ b/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h
@@ -57,6 +57,12 @@
#define UART_SET_DLAB(uart) /* MMRs not muxed on BF54x */
#define UART_CLEAR_DLAB(uart) /* MMRs not muxed on BF54x */
+#define UART_GET_CTS(x) (UART_GET_MSR(x) & CTS)
+#define UART_SET_RTS(x) (UART_PUT_MCR(x, UART_GET_MCR(x) | MRTS))
+#define UART_CLEAR_RTS(x) (UART_PUT_MCR(x, UART_GET_MCR(x) & ~MRTS))
+#define UART_ENABLE_INTS(x, v) UART_SET_IER(x, v)
+#define UART_DISABLE_INTS(x) UART_CLEAR_IER(x, 0xF)
+
#if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS)
# define CONFIG_SERIAL_BFIN_CTSRTS
diff --git a/include/asm-blackfin/mach-bf561/anomaly.h b/include/asm-blackfin/mach-bf561/anomaly.h
index 82157ca..5c5d7d7 100644
--- a/include/asm-blackfin/mach-bf561/anomaly.h
+++ b/include/asm-blackfin/mach-bf561/anomaly.h
@@ -2,7 +2,7 @@
* File: include/asm-blackfin/mach-bf561/anomaly.h
* Bugs: Enter bugs at http://blackfin.uclinux.org/
*
- * Copyright (C) 2004-2007 Analog Devices Inc.
+ * Copyright (C) 2004-2008 Analog Devices Inc.
* Licensed under the GPL-2 or later.
*/
diff --git a/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h
index 7a96287..30d90b5 100644
--- a/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h
+++ b/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h
@@ -53,6 +53,12 @@
#define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
#define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
+#define UART_SET_RTS(x) gpio_set_value(x->rts_pin, 1)
+#define UART_CLEAR_RTS(x) gpio_set_value(x->rts_pin, 0)
+#define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
+#define UART_DISABLE_INTS(x) UART_PUT_IER(x, 0)
+
#ifdef CONFIG_BFIN_UART0_CTSRTS
# define CONFIG_SERIAL_BFIN_CTSRTS
# ifndef CONFIG_UART0_CTS_PIN
diff --git a/include/asm-blackfin/mach-bf561/dma.h b/include/asm-blackfin/mach-bf561/dma.h
index 21d9820..8bc46cd 100644
--- a/include/asm-blackfin/mach-bf561/dma.h
+++ b/include/asm-blackfin/mach-bf561/dma.h
@@ -25,11 +25,11 @@
#define CH_MEM_STREAM1_SRC 27 /* RX */
#define CH_MEM_STREAM2_DEST 28
#define CH_MEM_STREAM2_SRC 29
-#define CH_MEM_STREAM3_SRC 30
-#define CH_MEM_STREAM3_DEST 31
+#define CH_MEM_STREAM3_DEST 30
+#define CH_MEM_STREAM3_SRC 31
#define CH_IMEM_STREAM0_DEST 32
#define CH_IMEM_STREAM0_SRC 33
-#define CH_IMEM_STREAM1_SRC 34
-#define CH_IMEM_STREAM1_DEST 35
+#define CH_IMEM_STREAM1_DEST 34
+#define CH_IMEM_STREAM1_SRC 35
#endif
diff --git a/include/asm-blackfin/serial.h b/include/asm-blackfin/serial.h
new file mode 100644
index 0000000..994dd86
--- /dev/null
+++ b/include/asm-blackfin/serial.h
@@ -0,0 +1,5 @@
+/*
+ * include/asm-blackfin/serial.h
+ */
+
+#define SERIAL_EXTRA_IRQ_FLAGS IRQF_TRIGGER_HIGH
diff --git a/include/asm-frv/checksum.h b/include/asm-frv/checksum.h
index 9b16898..269da09 100644
--- a/include/asm-frv/checksum.h
+++ b/include/asm-frv/checksum.h
@@ -75,7 +75,7 @@
: "=r" (sum), "=r" (iph), "=r" (ihl), "=r" (inc), "=&r"(tmp)
: "0" (sum), "1" (iph), "2" (ihl), "3" (4),
"m"(*(volatile struct { int _[100]; } *)iph)
- : "icc0", "icc1"
+ : "icc0", "icc1", "memory"
);
return (__force __sum16)~sum;
diff --git a/include/asm-frv/mem-layout.h b/include/asm-frv/mem-layout.h
index 734a1d0..2947764 100644
--- a/include/asm-frv/mem-layout.h
+++ b/include/asm-frv/mem-layout.h
@@ -31,6 +31,13 @@
#define PAGE_MASK (~(PAGE_SIZE-1))
+/*
+ * the slab must be aligned such that load- and store-double instructions don't
+ * fault if used
+ */
+#define ARCH_KMALLOC_MINALIGN 8
+#define ARCH_SLAB_MINALIGN 8
+
/*****************************************************************************/
/*
* virtual memory layout from kernel's point of view
diff --git a/include/asm-frv/system.h b/include/asm-frv/system.h
index cb307f8..d3a12a9 100644
--- a/include/asm-frv/system.h
+++ b/include/asm-frv/system.h
@@ -179,7 +179,7 @@
#define mb() asm volatile ("membar" : : :"memory")
#define rmb() asm volatile ("membar" : : :"memory")
#define wmb() asm volatile ("membar" : : :"memory")
-#define read_barrier_depends() barrier()
+#define read_barrier_depends() do { } while (0)
#ifdef CONFIG_SMP
#define smp_mb() mb()
diff --git a/include/asm-generic/gpio.h b/include/asm-generic/gpio.h
index ecf675a..6be061d 100644
--- a/include/asm-generic/gpio.h
+++ b/include/asm-generic/gpio.h
@@ -1,8 +1,12 @@
#ifndef _ASM_GENERIC_GPIO_H
#define _ASM_GENERIC_GPIO_H
+#include <linux/types.h>
+
#ifdef CONFIG_HAVE_GPIO_LIB
+#include <linux/compiler.h>
+
/* Platforms may implement their GPIO interface with library code,
* at a small performance cost for non-inlined operations and some
* extra memory (for code and for per-GPIO table entries).
@@ -74,7 +78,7 @@
extern const char *gpiochip_is_requested(struct gpio_chip *chip,
unsigned offset);
-extern int __init __must_check gpiochip_reserve(int start, int ngpio);
+extern int __must_check gpiochip_reserve(int start, int ngpio);
/* add/remove chips */
extern int gpiochip_add(struct gpio_chip *chip);
diff --git a/include/asm-h8300/cacheflush.h b/include/asm-h8300/cacheflush.h
index 71210d1..5ffdca2 100644
--- a/include/asm-h8300/cacheflush.h
+++ b/include/asm-h8300/cacheflush.h
@@ -3,7 +3,7 @@
*/
#ifndef _ASM_H8300_CACHEFLUSH_H
-#define _AMS_H8300_CACHEFLUSH_H
+#define _ASM_H8300_CACHEFLUSH_H
/*
* Cache handling functions
diff --git a/include/asm-h8300/param.h b/include/asm-h8300/param.h
index 04f64f1..1c72fb8 100644
--- a/include/asm-h8300/param.h
+++ b/include/asm-h8300/param.h
@@ -1,14 +1,12 @@
#ifndef _H8300_PARAM_H
#define _H8300_PARAM_H
-
-#ifndef HZ
-#define HZ CONFIG_HZ
-#endif
-
#ifdef __KERNEL__
+#define HZ CONFIG_HZ
#define USER_HZ HZ
#define CLOCKS_PER_SEC (USER_HZ)
+#else
+#define HZ 100
#endif
#define EXEC_PAGESIZE 4096
diff --git a/include/asm-ia64/kvm.h b/include/asm-ia64/kvm.h
index eb2d355..3f6a090 100644
--- a/include/asm-ia64/kvm.h
+++ b/include/asm-ia64/kvm.h
@@ -22,14 +22,13 @@
*/
#include <asm/types.h>
-#include <asm/fpu.h>
#include <linux/ioctl.h>
/* Architectural interrupt line count. */
#define KVM_NR_INTERRUPTS 256
-#define KVM_IOAPIC_NUM_PINS 24
+#define KVM_IOAPIC_NUM_PINS 48
struct kvm_ioapic_state {
__u64 base_address;
@@ -61,6 +60,13 @@
#define KVM_CONTEXT_SIZE 8*1024
+struct kvm_fpreg {
+ union {
+ unsigned long bits[2];
+ long double __dummy; /* force 16-byte alignment */
+ } u;
+};
+
union context {
/* 8K size */
char dummy[KVM_CONTEXT_SIZE];
@@ -77,7 +83,7 @@
unsigned long ibr[8];
unsigned long dbr[8];
unsigned long pkr[8];
- struct ia64_fpreg fr[128];
+ struct kvm_fpreg fr[128];
};
};
diff --git a/include/asm-ia64/machvec.h b/include/asm-ia64/machvec.h
index 9f020eb..0721a5e 100644
--- a/include/asm-ia64/machvec.h
+++ b/include/asm-ia64/machvec.h
@@ -126,6 +126,8 @@
# include <asm/machvec_hpzx1_swiotlb.h>
# elif defined (CONFIG_IA64_SGI_SN2)
# include <asm/machvec_sn2.h>
+# elif defined (CONFIG_IA64_SGI_UV)
+# include <asm/machvec_uv.h>
# elif defined (CONFIG_IA64_GENERIC)
# ifdef MACHVEC_PLATFORM_HEADER
diff --git a/include/asm-ia64/machvec_uv.h b/include/asm-ia64/machvec_uv.h
new file mode 100644
index 0000000..2931447
--- /dev/null
+++ b/include/asm-ia64/machvec_uv.h
@@ -0,0 +1,26 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * SGI UV Core Functions
+ *
+ * Copyright (C) 2008 Silicon Graphics, Inc. All rights reserved.
+ */
+
+#ifndef _ASM_IA64_MACHVEC_UV_H
+#define _ASM_IA64_MACHVEC_UV_H
+
+extern ia64_mv_setup_t uv_setup;
+
+/*
+ * This stuff has dual use!
+ *
+ * For a generic kernel, the macros are used to initialize the
+ * platform's machvec structure. When compiling a non-generic kernel,
+ * the macros are used directly.
+ */
+#define platform_name "uv"
+#define platform_setup uv_setup
+
+#endif /* _ASM_IA64_MACHVEC_UV_H */
diff --git a/include/asm-ia64/patch.h b/include/asm-ia64/patch.h
index a715430..295fe6a 100644
--- a/include/asm-ia64/patch.h
+++ b/include/asm-ia64/patch.h
@@ -21,6 +21,7 @@
extern void ia64_patch_mckinley_e9 (unsigned long start, unsigned long end);
extern void ia64_patch_vtop (unsigned long start, unsigned long end);
extern void ia64_patch_phys_stack_reg(unsigned long val);
+extern void ia64_patch_rse (unsigned long start, unsigned long end);
extern void ia64_patch_gate (void);
#endif /* _ASM_IA64_PATCH_H */
diff --git a/include/asm-ia64/ptrace.h b/include/asm-ia64/ptrace.h
index 4b2a8d4..15f8dcf 100644
--- a/include/asm-ia64/ptrace.h
+++ b/include/asm-ia64/ptrace.h
@@ -76,7 +76,7 @@
# define KERNEL_STACK_SIZE_ORDER 0
#endif
-#define IA64_RBS_OFFSET ((IA64_TASK_SIZE + IA64_THREAD_INFO_SIZE + 15) & ~15)
+#define IA64_RBS_OFFSET ((IA64_TASK_SIZE + IA64_THREAD_INFO_SIZE + 31) & ~31)
#define IA64_STK_OFFSET ((1 << KERNEL_STACK_SIZE_ORDER)*PAGE_SIZE)
#define KERNEL_STACK_SIZE IA64_STK_OFFSET
diff --git a/include/asm-ia64/sections.h b/include/asm-ia64/sections.h
index dc42a35..7286e4a 100644
--- a/include/asm-ia64/sections.h
+++ b/include/asm-ia64/sections.h
@@ -10,6 +10,7 @@
extern char __per_cpu_start[], __per_cpu_end[], __phys_per_cpu_start[];
extern char __start___vtop_patchlist[], __end___vtop_patchlist[];
+extern char __start___rse_patchlist[], __end___rse_patchlist[];
extern char __start___mckinley_e9_bundles[], __end___mckinley_e9_bundles[];
extern char __start___phys_stack_reg_patchlist[], __end___phys_stack_reg_patchlist[];
extern char __start_gate_section[];
diff --git a/include/asm-ia64/uv/uv_hub.h b/include/asm-ia64/uv/uv_hub.h
new file mode 100644
index 0000000..f607018
--- /dev/null
+++ b/include/asm-ia64/uv/uv_hub.h
@@ -0,0 +1,309 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * SGI UV architectural definitions
+ *
+ * Copyright (C) 2008 Silicon Graphics, Inc. All rights reserved.
+ */
+
+#ifndef __ASM_IA64_UV_HUB_H__
+#define __ASM_IA64_UV_HUB_H__
+
+#include <linux/numa.h>
+#include <linux/percpu.h>
+#include <asm/types.h>
+#include <asm/percpu.h>
+
+
+/*
+ * Addressing Terminology
+ *
+ * M - The low M bits of a physical address represent the offset
+ * into the blade local memory. RAM memory on a blade is physically
+ * contiguous (although various IO spaces may punch holes in
+ * it)..
+ *
+ * N - Number of bits in the node portion of a socket physical
+ * address.
+ *
+ * NASID - network ID of a router, Mbrick or Cbrick. Nasid values of
+ * routers always have low bit of 1, C/MBricks have low bit
+ * equal to 0. Most addressing macros that target UV hub chips
+ * right shift the NASID by 1 to exclude the always-zero bit.
+ * NASIDs contain up to 15 bits.
+ *
+ * GNODE - NASID right shifted by 1 bit. Most mmrs contain gnodes instead
+ * of nasids.
+ *
+ * PNODE - the low N bits of the GNODE. The PNODE is the most useful variant
+ * of the nasid for socket usage.
+ *
+ *
+ * NumaLink Global Physical Address Format:
+ * +--------------------------------+---------------------+
+ * |00..000| GNODE | NodeOffset |
+ * +--------------------------------+---------------------+
+ * |<-------53 - M bits --->|<--------M bits ----->
+ *
+ * M - number of node offset bits (35 .. 40)
+ *
+ *
+ * Memory/UV-HUB Processor Socket Address Format:
+ * +----------------+---------------+---------------------+
+ * |00..000000000000| PNODE | NodeOffset |
+ * +----------------+---------------+---------------------+
+ * <--- N bits --->|<--------M bits ----->
+ *
+ * M - number of node offset bits (35 .. 40)
+ * N - number of PNODE bits (0 .. 10)
+ *
+ * Note: M + N cannot currently exceed 44 (x86_64) or 46 (IA64).
+ * The actual values are configuration dependent and are set at
+ * boot time. M & N values are set by the hardware/BIOS at boot.
+ */
+
+
+/*
+ * Maximum number of bricks in all partitions and in all coherency domains.
+ * This is the total number of bricks accessible in the numalink fabric. It
+ * includes all C & M bricks. Routers are NOT included.
+ *
+ * This value is also the value of the maximum number of non-router NASIDs
+ * in the numalink fabric.
+ *
+ * NOTE: a brick may contain 1 or 2 OS nodes. Don't get these confused.
+ */
+#define UV_MAX_NUMALINK_BLADES 16384
+
+/*
+ * Maximum number of C/Mbricks within a software SSI (hardware may support
+ * more).
+ */
+#define UV_MAX_SSI_BLADES 1
+
+/*
+ * The largest possible NASID of a C or M brick (+ 2)
+ */
+#define UV_MAX_NASID_VALUE (UV_MAX_NUMALINK_NODES * 2)
+
+/*
+ * The following defines attributes of the HUB chip. These attributes are
+ * frequently referenced and are kept in the per-cpu data areas of each cpu.
+ * They are kept together in a struct to minimize cache misses.
+ */
+struct uv_hub_info_s {
+ unsigned long global_mmr_base;
+ unsigned long gpa_mask;
+ unsigned long gnode_upper;
+ unsigned long lowmem_remap_top;
+ unsigned long lowmem_remap_base;
+ unsigned short pnode;
+ unsigned short pnode_mask;
+ unsigned short coherency_domain_number;
+ unsigned short numa_blade_id;
+ unsigned char blade_processor_id;
+ unsigned char m_val;
+ unsigned char n_val;
+};
+DECLARE_PER_CPU(struct uv_hub_info_s, __uv_hub_info);
+#define uv_hub_info (&__get_cpu_var(__uv_hub_info))
+#define uv_cpu_hub_info(cpu) (&per_cpu(__uv_hub_info, cpu))
+
+/*
+ * Local & Global MMR space macros.
+ * Note: macros are intended to be used ONLY by inline functions
+ * in this file - not by other kernel code.
+ * n - NASID (full 15-bit global nasid)
+ * g - GNODE (full 15-bit global nasid, right shifted 1)
+ * p - PNODE (local part of nsids, right shifted 1)
+ */
+#define UV_NASID_TO_PNODE(n) (((n) >> 1) & uv_hub_info->pnode_mask)
+#define UV_PNODE_TO_NASID(p) (((p) << 1) | uv_hub_info->gnode_upper)
+
+#define UV_LOCAL_MMR_BASE 0xf4000000UL
+#define UV_GLOBAL_MMR32_BASE 0xf8000000UL
+#define UV_GLOBAL_MMR64_BASE (uv_hub_info->global_mmr_base)
+
+#define UV_GLOBAL_MMR32_PNODE_SHIFT 15
+#define UV_GLOBAL_MMR64_PNODE_SHIFT 26
+
+#define UV_GLOBAL_MMR32_PNODE_BITS(p) ((p) << (UV_GLOBAL_MMR32_PNODE_SHIFT))
+
+#define UV_GLOBAL_MMR64_PNODE_BITS(p) \
+ ((unsigned long)(p) << UV_GLOBAL_MMR64_PNODE_SHIFT)
+
+/*
+ * Macros for converting between kernel virtual addresses, socket local physical
+ * addresses, and UV global physical addresses.
+ * Note: use the standard __pa() & __va() macros for converting
+ * between socket virtual and socket physical addresses.
+ */
+
+/* socket phys RAM --> UV global physical address */
+static inline unsigned long uv_soc_phys_ram_to_gpa(unsigned long paddr)
+{
+ if (paddr < uv_hub_info->lowmem_remap_top)
+ paddr += uv_hub_info->lowmem_remap_base;
+ return paddr | uv_hub_info->gnode_upper;
+}
+
+
+/* socket virtual --> UV global physical address */
+static inline unsigned long uv_gpa(void *v)
+{
+ return __pa(v) | uv_hub_info->gnode_upper;
+}
+
+/* socket virtual --> UV global physical address */
+static inline void *uv_vgpa(void *v)
+{
+ return (void *)uv_gpa(v);
+}
+
+/* UV global physical address --> socket virtual */
+static inline void *uv_va(unsigned long gpa)
+{
+ return __va(gpa & uv_hub_info->gpa_mask);
+}
+
+/* pnode, offset --> socket virtual */
+static inline void *uv_pnode_offset_to_vaddr(int pnode, unsigned long offset)
+{
+ return __va(((unsigned long)pnode << uv_hub_info->m_val) | offset);
+}
+
+
+/*
+ * Access global MMRs using the low memory MMR32 space. This region supports
+ * faster MMR access but not all MMRs are accessible in this space.
+ */
+static inline unsigned long *uv_global_mmr32_address(int pnode,
+ unsigned long offset)
+{
+ return __va(UV_GLOBAL_MMR32_BASE |
+ UV_GLOBAL_MMR32_PNODE_BITS(pnode) | offset);
+}
+
+static inline void uv_write_global_mmr32(int pnode, unsigned long offset,
+ unsigned long val)
+{
+ *uv_global_mmr32_address(pnode, offset) = val;
+}
+
+static inline unsigned long uv_read_global_mmr32(int pnode,
+ unsigned long offset)
+{
+ return *uv_global_mmr32_address(pnode, offset);
+}
+
+/*
+ * Access Global MMR space using the MMR space located at the top of physical
+ * memory.
+ */
+static inline unsigned long *uv_global_mmr64_address(int pnode,
+ unsigned long offset)
+{
+ return __va(UV_GLOBAL_MMR64_BASE |
+ UV_GLOBAL_MMR64_PNODE_BITS(pnode) | offset);
+}
+
+static inline void uv_write_global_mmr64(int pnode, unsigned long offset,
+ unsigned long val)
+{
+ *uv_global_mmr64_address(pnode, offset) = val;
+}
+
+static inline unsigned long uv_read_global_mmr64(int pnode,
+ unsigned long offset)
+{
+ return *uv_global_mmr64_address(pnode, offset);
+}
+
+/*
+ * Access hub local MMRs. Faster than using global space but only local MMRs
+ * are accessible.
+ */
+static inline unsigned long *uv_local_mmr_address(unsigned long offset)
+{
+ return __va(UV_LOCAL_MMR_BASE | offset);
+}
+
+static inline unsigned long uv_read_local_mmr(unsigned long offset)
+{
+ return *uv_local_mmr_address(offset);
+}
+
+static inline void uv_write_local_mmr(unsigned long offset, unsigned long val)
+{
+ *uv_local_mmr_address(offset) = val;
+}
+
+/*
+ * Structures and definitions for converting between cpu, node, pnode, and blade
+ * numbers.
+ */
+
+/* Blade-local cpu number of current cpu. Numbered 0 .. <# cpus on the blade> */
+static inline int uv_blade_processor_id(void)
+{
+ return smp_processor_id();
+}
+
+/* Blade number of current cpu. Numnbered 0 .. <#blades -1> */
+static inline int uv_numa_blade_id(void)
+{
+ return 0;
+}
+
+/* Convert a cpu number to the the UV blade number */
+static inline int uv_cpu_to_blade_id(int cpu)
+{
+ return 0;
+}
+
+/* Convert linux node number to the UV blade number */
+static inline int uv_node_to_blade_id(int nid)
+{
+ return 0;
+}
+
+/* Convert a blade id to the PNODE of the blade */
+static inline int uv_blade_to_pnode(int bid)
+{
+ return 0;
+}
+
+/* Determine the number of possible cpus on a blade */
+static inline int uv_blade_nr_possible_cpus(int bid)
+{
+ return num_possible_cpus();
+}
+
+/* Determine the number of online cpus on a blade */
+static inline int uv_blade_nr_online_cpus(int bid)
+{
+ return num_online_cpus();
+}
+
+/* Convert a cpu id to the PNODE of the blade containing the cpu */
+static inline int uv_cpu_to_pnode(int cpu)
+{
+ return 0;
+}
+
+/* Convert a linux node number to the PNODE of the blade */
+static inline int uv_node_to_pnode(int nid)
+{
+ return 0;
+}
+
+/* Maximum possible number of blades */
+static inline int uv_num_possible_blades(void)
+{
+ return 1;
+}
+
+#endif /* __ASM_IA64_UV_HUB__ */
+
diff --git a/include/asm-ia64/uv/uv_mmrs.h b/include/asm-ia64/uv/uv_mmrs.h
new file mode 100644
index 0000000..1cc1dbb
--- /dev/null
+++ b/include/asm-ia64/uv/uv_mmrs.h
@@ -0,0 +1,266 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * SGI UV MMR definitions
+ *
+ * Copyright (C) 2007-2008 Silicon Graphics, Inc. All rights reserved.
+ */
+
+#ifndef __ASM_IA64_UV_MMRS__
+#define __ASM_IA64_UV_MMRS__
+
+/*
+ * AUTO GENERATED - Do not edit
+ */
+
+ #define UV_MMR_ENABLE (1UL << 63)
+
+/* ========================================================================= */
+/* UVH_NODE_ID */
+/* ========================================================================= */
+#define UVH_NODE_ID 0x0UL
+
+#define UVH_NODE_ID_FORCE1_SHFT 0
+#define UVH_NODE_ID_FORCE1_MASK 0x0000000000000001UL
+#define UVH_NODE_ID_MANUFACTURER_SHFT 1
+#define UVH_NODE_ID_MANUFACTURER_MASK 0x0000000000000ffeUL
+#define UVH_NODE_ID_PART_NUMBER_SHFT 12
+#define UVH_NODE_ID_PART_NUMBER_MASK 0x000000000ffff000UL
+#define UVH_NODE_ID_REVISION_SHFT 28
+#define UVH_NODE_ID_REVISION_MASK 0x00000000f0000000UL
+#define UVH_NODE_ID_NODE_ID_SHFT 32
+#define UVH_NODE_ID_NODE_ID_MASK 0x00007fff00000000UL
+#define UVH_NODE_ID_NODES_PER_BIT_SHFT 48
+#define UVH_NODE_ID_NODES_PER_BIT_MASK 0x007f000000000000UL
+#define UVH_NODE_ID_NI_PORT_SHFT 56
+#define UVH_NODE_ID_NI_PORT_MASK 0x0f00000000000000UL
+
+union uvh_node_id_u {
+ unsigned long v;
+ struct uvh_node_id_s {
+ unsigned long force1 : 1; /* RO */
+ unsigned long manufacturer : 11; /* RO */
+ unsigned long part_number : 16; /* RO */
+ unsigned long revision : 4; /* RO */
+ unsigned long node_id : 15; /* RW */
+ unsigned long rsvd_47 : 1; /* */
+ unsigned long nodes_per_bit : 7; /* RW */
+ unsigned long rsvd_55 : 1; /* */
+ unsigned long ni_port : 4; /* RO */
+ unsigned long rsvd_60_63 : 4; /* */
+ } s;
+};
+
+/* ========================================================================= */
+/* UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR */
+/* ========================================================================= */
+#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR 0x16000d0UL
+
+#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR_DEST_BASE_SHFT 24
+#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_0_MMR_DEST_BASE_MASK 0x00003fffff000000UL
+
+union uvh_rh_gam_alias210_redirect_config_0_mmr_u {
+ unsigned long v;
+ struct uvh_rh_gam_alias210_redirect_config_0_mmr_s {
+ unsigned long rsvd_0_23 : 24; /* */
+ unsigned long dest_base : 22; /* RW */
+ unsigned long rsvd_46_63: 18; /* */
+ } s;
+};
+
+/* ========================================================================= */
+/* UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR */
+/* ========================================================================= */
+#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR 0x16000e0UL
+
+#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR_DEST_BASE_SHFT 24
+#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_1_MMR_DEST_BASE_MASK 0x00003fffff000000UL
+
+union uvh_rh_gam_alias210_redirect_config_1_mmr_u {
+ unsigned long v;
+ struct uvh_rh_gam_alias210_redirect_config_1_mmr_s {
+ unsigned long rsvd_0_23 : 24; /* */
+ unsigned long dest_base : 22; /* RW */
+ unsigned long rsvd_46_63: 18; /* */
+ } s;
+};
+
+/* ========================================================================= */
+/* UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR */
+/* ========================================================================= */
+#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR 0x16000f0UL
+
+#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR_DEST_BASE_SHFT 24
+#define UVH_RH_GAM_ALIAS210_REDIRECT_CONFIG_2_MMR_DEST_BASE_MASK 0x00003fffff000000UL
+
+union uvh_rh_gam_alias210_redirect_config_2_mmr_u {
+ unsigned long v;
+ struct uvh_rh_gam_alias210_redirect_config_2_mmr_s {
+ unsigned long rsvd_0_23 : 24; /* */
+ unsigned long dest_base : 22; /* RW */
+ unsigned long rsvd_46_63: 18; /* */
+ } s;
+};
+
+/* ========================================================================= */
+/* UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR */
+/* ========================================================================= */
+#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR 0x1600010UL
+
+#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_BASE_SHFT 28
+#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_BASE_MASK 0x00003ffff0000000UL
+#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_GR4_SHFT 46
+#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_GR4_MASK 0x0000400000000000UL
+#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_N_GRU_SHFT 52
+#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_N_GRU_MASK 0x00f0000000000000UL
+#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_ENABLE_SHFT 63
+#define UVH_RH_GAM_GRU_OVERLAY_CONFIG_MMR_ENABLE_MASK 0x8000000000000000UL
+
+union uvh_rh_gam_gru_overlay_config_mmr_u {
+ unsigned long v;
+ struct uvh_rh_gam_gru_overlay_config_mmr_s {
+ unsigned long rsvd_0_27: 28; /* */
+ unsigned long base : 18; /* RW */
+ unsigned long gr4 : 1; /* RW */
+ unsigned long rsvd_47_51: 5; /* */
+ unsigned long n_gru : 4; /* RW */
+ unsigned long rsvd_56_62: 7; /* */
+ unsigned long enable : 1; /* RW */
+ } s;
+};
+
+/* ========================================================================= */
+/* UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR */
+/* ========================================================================= */
+#define UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR 0x1600028UL
+
+#define UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR_BASE_SHFT 26
+#define UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR_BASE_MASK 0x00003ffffc000000UL
+#define UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR_DUAL_HUB_SHFT 46
+#define UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR_DUAL_HUB_MASK 0x0000400000000000UL
+#define UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR_ENABLE_SHFT 63
+#define UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR_ENABLE_MASK 0x8000000000000000UL
+
+union uvh_rh_gam_mmr_overlay_config_mmr_u {
+ unsigned long v;
+ struct uvh_rh_gam_mmr_overlay_config_mmr_s {
+ unsigned long rsvd_0_25: 26; /* */
+ unsigned long base : 20; /* RW */
+ unsigned long dual_hub : 1; /* RW */
+ unsigned long rsvd_47_62: 16; /* */
+ unsigned long enable : 1; /* RW */
+ } s;
+};
+
+/* ========================================================================= */
+/* UVH_RTC */
+/* ========================================================================= */
+#define UVH_RTC 0x28000UL
+
+#define UVH_RTC_REAL_TIME_CLOCK_SHFT 0
+#define UVH_RTC_REAL_TIME_CLOCK_MASK 0x00ffffffffffffffUL
+
+union uvh_rtc_u {
+ unsigned long v;
+ struct uvh_rtc_s {
+ unsigned long real_time_clock : 56; /* RW */
+ unsigned long rsvd_56_63 : 8; /* */
+ } s;
+};
+
+/* ========================================================================= */
+/* UVH_SI_ADDR_MAP_CONFIG */
+/* ========================================================================= */
+#define UVH_SI_ADDR_MAP_CONFIG 0xc80000UL
+
+#define UVH_SI_ADDR_MAP_CONFIG_M_SKT_SHFT 0
+#define UVH_SI_ADDR_MAP_CONFIG_M_SKT_MASK 0x000000000000003fUL
+#define UVH_SI_ADDR_MAP_CONFIG_N_SKT_SHFT 8
+#define UVH_SI_ADDR_MAP_CONFIG_N_SKT_MASK 0x0000000000000f00UL
+
+union uvh_si_addr_map_config_u {
+ unsigned long v;
+ struct uvh_si_addr_map_config_s {
+ unsigned long m_skt : 6; /* RW */
+ unsigned long rsvd_6_7: 2; /* */
+ unsigned long n_skt : 4; /* RW */
+ unsigned long rsvd_12_63: 52; /* */
+ } s;
+};
+
+/* ========================================================================= */
+/* UVH_SI_ALIAS0_OVERLAY_CONFIG */
+/* ========================================================================= */
+#define UVH_SI_ALIAS0_OVERLAY_CONFIG 0xc80008UL
+
+#define UVH_SI_ALIAS0_OVERLAY_CONFIG_BASE_SHFT 24
+#define UVH_SI_ALIAS0_OVERLAY_CONFIG_BASE_MASK 0x00000000ff000000UL
+#define UVH_SI_ALIAS0_OVERLAY_CONFIG_M_ALIAS_SHFT 48
+#define UVH_SI_ALIAS0_OVERLAY_CONFIG_M_ALIAS_MASK 0x001f000000000000UL
+#define UVH_SI_ALIAS0_OVERLAY_CONFIG_ENABLE_SHFT 63
+#define UVH_SI_ALIAS0_OVERLAY_CONFIG_ENABLE_MASK 0x8000000000000000UL
+
+union uvh_si_alias0_overlay_config_u {
+ unsigned long v;
+ struct uvh_si_alias0_overlay_config_s {
+ unsigned long rsvd_0_23: 24; /* */
+ unsigned long base : 8; /* RW */
+ unsigned long rsvd_32_47: 16; /* */
+ unsigned long m_alias : 5; /* RW */
+ unsigned long rsvd_53_62: 10; /* */
+ unsigned long enable : 1; /* RW */
+ } s;
+};
+
+/* ========================================================================= */
+/* UVH_SI_ALIAS1_OVERLAY_CONFIG */
+/* ========================================================================= */
+#define UVH_SI_ALIAS1_OVERLAY_CONFIG 0xc80010UL
+
+#define UVH_SI_ALIAS1_OVERLAY_CONFIG_BASE_SHFT 24
+#define UVH_SI_ALIAS1_OVERLAY_CONFIG_BASE_MASK 0x00000000ff000000UL
+#define UVH_SI_ALIAS1_OVERLAY_CONFIG_M_ALIAS_SHFT 48
+#define UVH_SI_ALIAS1_OVERLAY_CONFIG_M_ALIAS_MASK 0x001f000000000000UL
+#define UVH_SI_ALIAS1_OVERLAY_CONFIG_ENABLE_SHFT 63
+#define UVH_SI_ALIAS1_OVERLAY_CONFIG_ENABLE_MASK 0x8000000000000000UL
+
+union uvh_si_alias1_overlay_config_u {
+ unsigned long v;
+ struct uvh_si_alias1_overlay_config_s {
+ unsigned long rsvd_0_23: 24; /* */
+ unsigned long base : 8; /* RW */
+ unsigned long rsvd_32_47: 16; /* */
+ unsigned long m_alias : 5; /* RW */
+ unsigned long rsvd_53_62: 10; /* */
+ unsigned long enable : 1; /* RW */
+ } s;
+};
+
+/* ========================================================================= */
+/* UVH_SI_ALIAS2_OVERLAY_CONFIG */
+/* ========================================================================= */
+#define UVH_SI_ALIAS2_OVERLAY_CONFIG 0xc80018UL
+
+#define UVH_SI_ALIAS2_OVERLAY_CONFIG_BASE_SHFT 24
+#define UVH_SI_ALIAS2_OVERLAY_CONFIG_BASE_MASK 0x00000000ff000000UL
+#define UVH_SI_ALIAS2_OVERLAY_CONFIG_M_ALIAS_SHFT 48
+#define UVH_SI_ALIAS2_OVERLAY_CONFIG_M_ALIAS_MASK 0x001f000000000000UL
+#define UVH_SI_ALIAS2_OVERLAY_CONFIG_ENABLE_SHFT 63
+#define UVH_SI_ALIAS2_OVERLAY_CONFIG_ENABLE_MASK 0x8000000000000000UL
+
+union uvh_si_alias2_overlay_config_u {
+ unsigned long v;
+ struct uvh_si_alias2_overlay_config_s {
+ unsigned long rsvd_0_23: 24; /* */
+ unsigned long base : 8; /* RW */
+ unsigned long rsvd_32_47: 16; /* */
+ unsigned long m_alias : 5; /* RW */
+ unsigned long rsvd_53_62: 10; /* */
+ unsigned long enable : 1; /* RW */
+ } s;
+};
+
+
+#endif /* __ASM_IA64_UV_MMRS__ */
diff --git a/include/asm-m32r/uaccess.h b/include/asm-m32r/uaccess.h
index bd8c837..1c7047b 100644
--- a/include/asm-m32r/uaccess.h
+++ b/include/asm-m32r/uaccess.h
@@ -14,6 +14,7 @@
#include <linux/errno.h>
#include <linux/thread_info.h>
#include <asm/page.h>
+#include <asm/setup.h>
#define VERIFY_READ 0
#define VERIFY_WRITE 1
@@ -106,7 +107,6 @@
#else
static inline int access_ok(int type, const void *addr, unsigned long size)
{
- extern unsigned long memory_start, memory_end;
unsigned long val = (unsigned long)addr;
return ((val >= memory_start) && ((val + size) < memory_end));
diff --git a/include/asm-m68k/bitops.h b/include/asm-m68k/bitops.h
index 83d1f28..3e81064 100644
--- a/include/asm-m68k/bitops.h
+++ b/include/asm-m68k/bitops.h
@@ -410,8 +410,49 @@
res = ext2_find_first_zero_bit (p, size - 32 * (p - addr));
return (p - addr) * 32 + res;
}
-#define ext2_find_next_bit(addr, size, off) \
- generic_find_next_le_bit((unsigned long *)(addr), (size), (off))
+
+static inline int ext2_find_first_bit(const void *vaddr, unsigned size)
+{
+ const unsigned long *p = vaddr, *addr = vaddr;
+ int res;
+
+ if (!size)
+ return 0;
+
+ size = (size >> 5) + ((size & 31) > 0);
+ while (*p++ == 0UL) {
+ if (--size == 0)
+ return (p - addr) << 5;
+ }
+
+ --p;
+ for (res = 0; res < 32; res++)
+ if (ext2_test_bit(res, p))
+ break;
+ return (p - addr) * 32 + res;
+}
+
+static inline int ext2_find_next_bit(const void *vaddr, unsigned size,
+ unsigned offset)
+{
+ const unsigned long *addr = vaddr;
+ const unsigned long *p = addr + (offset >> 5);
+ int bit = offset & 31UL, res;
+
+ if (offset >= size)
+ return size;
+
+ if (bit) {
+ /* Look for one in first longword */
+ for (res = bit; res < 32; res++)
+ if (ext2_test_bit(res, p))
+ return (p - addr) * 32 + res;
+ p++;
+ }
+ /* No set bit yet, search remaining full bytes for a set bit */
+ res = ext2_find_first_bit(p, size - 32 * (p - addr));
+ return (p - addr) * 32 + res;
+}
#endif /* __KERNEL__ */
diff --git a/include/asm-m68k/bug.h b/include/asm-m68k/bug.h
index 7b60776c..e5b528d 100644
--- a/include/asm-m68k/bug.h
+++ b/include/asm-m68k/bug.h
@@ -7,7 +7,7 @@
#ifndef CONFIG_SUN3
#define BUG() do { \
printk("kernel BUG at %s:%d!\n", __FILE__, __LINE__); \
- asm volatile("illegal"); \
+ __builtin_trap(); \
} while (0)
#else
#define BUG() do { \
@@ -17,7 +17,7 @@
#endif
#else
#define BUG() do { \
- asm volatile("illegal"); \
+ __builtin_trap(); \
} while (0)
#endif
diff --git a/include/asm-m68k/io.h b/include/asm-m68k/io.h
index baf4f9b..657187f 100644
--- a/include/asm-m68k/io.h
+++ b/include/asm-m68k/io.h
@@ -91,20 +91,20 @@
#undef MULTI_ISA
#endif
-#define Q40_ISA (1)
-#define GG2_ISA (2)
-#define AG_ISA (3)
+#define ISA_TYPE_Q40 (1)
+#define ISA_TYPE_GG2 (2)
+#define ISA_TYPE_AG (3)
#if defined(CONFIG_Q40) && !defined(MULTI_ISA)
-#define ISA_TYPE Q40_ISA
+#define ISA_TYPE ISA_TYPE_Q40
#define ISA_SEX 0
#endif
#if defined(CONFIG_AMIGA_PCMCIA) && !defined(MULTI_ISA)
-#define ISA_TYPE AG_ISA
+#define ISA_TYPE ISA_TYPE_AG
#define ISA_SEX 1
#endif
#if defined(CONFIG_GG2) && !defined(MULTI_ISA)
-#define ISA_TYPE GG2_ISA
+#define ISA_TYPE ISA_TYPE_GG2
#define ISA_SEX 0
#endif
@@ -126,13 +126,13 @@
switch(ISA_TYPE)
{
#ifdef CONFIG_Q40
- case Q40_ISA: return (u8 __iomem *)Q40_ISA_IO_B(addr);
+ case ISA_TYPE_Q40: return (u8 __iomem *)Q40_ISA_IO_B(addr);
#endif
#ifdef CONFIG_GG2
- case GG2_ISA: return (u8 __iomem *)GG2_ISA_IO_B(addr);
+ case ISA_TYPE_GG2: return (u8 __iomem *)GG2_ISA_IO_B(addr);
#endif
#ifdef CONFIG_AMIGA_PCMCIA
- case AG_ISA: return (u8 __iomem *)AG_ISA_IO_B(addr);
+ case ISA_TYPE_AG: return (u8 __iomem *)AG_ISA_IO_B(addr);
#endif
default: return NULL; /* avoid warnings, just in case */
}
@@ -142,13 +142,13 @@
switch(ISA_TYPE)
{
#ifdef CONFIG_Q40
- case Q40_ISA: return (u16 __iomem *)Q40_ISA_IO_W(addr);
+ case ISA_TYPE_Q40: return (u16 __iomem *)Q40_ISA_IO_W(addr);
#endif
#ifdef CONFIG_GG2
- case GG2_ISA: return (u16 __iomem *)GG2_ISA_IO_W(addr);
+ case ISA_TYPE_GG2: return (u16 __iomem *)GG2_ISA_IO_W(addr);
#endif
#ifdef CONFIG_AMIGA_PCMCIA
- case AG_ISA: return (u16 __iomem *)AG_ISA_IO_W(addr);
+ case ISA_TYPE_AG: return (u16 __iomem *)AG_ISA_IO_W(addr);
#endif
default: return NULL; /* avoid warnings, just in case */
}
@@ -158,7 +158,7 @@
switch(ISA_TYPE)
{
#ifdef CONFIG_AMIGA_PCMCIA
- case AG_ISA: return (u32 __iomem *)AG_ISA_IO_W(addr);
+ case ISA_TYPE_AG: return (u32 __iomem *)AG_ISA_IO_W(addr);
#endif
default: return 0; /* avoid warnings, just in case */
}
@@ -168,13 +168,13 @@
switch(ISA_TYPE)
{
#ifdef CONFIG_Q40
- case Q40_ISA: return (u8 __iomem *)Q40_ISA_MEM_B(addr);
+ case ISA_TYPE_Q40: return (u8 __iomem *)Q40_ISA_MEM_B(addr);
#endif
#ifdef CONFIG_GG2
- case GG2_ISA: return (u8 __iomem *)GG2_ISA_MEM_B(addr);
+ case ISA_TYPE_GG2: return (u8 __iomem *)GG2_ISA_MEM_B(addr);
#endif
#ifdef CONFIG_AMIGA_PCMCIA
- case AG_ISA: return (u8 __iomem *)addr;
+ case ISA_TYPE_AG: return (u8 __iomem *)addr;
#endif
default: return NULL; /* avoid warnings, just in case */
}
@@ -184,13 +184,13 @@
switch(ISA_TYPE)
{
#ifdef CONFIG_Q40
- case Q40_ISA: return (u16 __iomem *)Q40_ISA_MEM_W(addr);
+ case ISA_TYPE_Q40: return (u16 __iomem *)Q40_ISA_MEM_W(addr);
#endif
#ifdef CONFIG_GG2
- case GG2_ISA: return (u16 __iomem *)GG2_ISA_MEM_W(addr);
+ case ISA_TYPE_GG2: return (u16 __iomem *)GG2_ISA_MEM_W(addr);
#endif
#ifdef CONFIG_AMIGA_PCMCIA
- case AG_ISA: return (u16 __iomem *)addr;
+ case ISA_TYPE_AG: return (u16 __iomem *)addr;
#endif
default: return NULL; /* avoid warnings, just in case */
}
@@ -218,13 +218,13 @@
switch(ISA_TYPE)
{
#ifdef CONFIG_Q40
- case Q40_ISA: isa_outb(0,0x80); break;
+ case ISA_TYPE_Q40: isa_outb(0,0x80); break;
#endif
#ifdef CONFIG_GG2
- case GG2_ISA: break;
+ case ISA_TYPE_GG2: break;
#endif
#ifdef CONFIG_AMIGA_PCMCIA
- case AG_ISA: break;
+ case ISA_TYPE_AG: break;
#endif
default: break; /* avoid warnings */
}
diff --git a/include/asm-m68k/setup.h b/include/asm-m68k/setup.h
index 2a8853c..4dfb395 100644
--- a/include/asm-m68k/setup.h
+++ b/include/asm-m68k/setup.h
@@ -248,7 +248,7 @@
#ifndef __ASSEMBLY__
extern unsigned long m68k_cputype;
extern unsigned long m68k_fputype;
-extern unsigned long m68k_mmutype; /* Not really used yet */
+extern unsigned long m68k_mmutype;
#ifdef CONFIG_VME
extern unsigned long vme_brdtype;
#endif
diff --git a/include/asm-m68k/uaccess.h b/include/asm-m68k/uaccess.h
index 5c1264c..7107f3fb 100644
--- a/include/asm-m68k/uaccess.h
+++ b/include/asm-m68k/uaccess.h
@@ -14,7 +14,11 @@
#define VERIFY_WRITE 1
/* We let the MMU do all checking */
-#define access_ok(type,addr,size) 1
+static inline int access_ok(int type, const void __user *addr,
+ unsigned long size)
+{
+ return 1;
+}
/*
* The exception table consists of pairs of addresses: the first is the
diff --git a/include/asm-mips/bitops.h b/include/asm-mips/bitops.h
index c2bd126..6427247 100644
--- a/include/asm-mips/bitops.h
+++ b/include/asm-mips/bitops.h
@@ -558,11 +558,13 @@
__clear_bit(nr, addr);
}
+#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64)
+
/*
* Return the bit position (0..63) of the most significant 1 bit in a word
* Returns -1 if no 1 bit exists
*/
-static inline int __ilog2(unsigned long x)
+static inline unsigned long __fls(unsigned long x)
{
int lz;
@@ -591,13 +593,6 @@
return 63 - lz;
}
-static inline unsigned long __fls(unsigned long x)
-{
- return __ilog2(x);
-}
-
-#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64)
-
/*
* __ffs - find first bit in word.
* @word: The word to search
@@ -607,7 +602,7 @@
*/
static inline unsigned long __ffs(unsigned long word)
{
- return __ilog2(word & -word);
+ return __fls(word & -word);
}
/*
@@ -654,6 +649,7 @@
#else
#include <asm-generic/bitops/__ffs.h>
+#include <asm-generic/bitops/__fls.h>
#include <asm-generic/bitops/ffs.h>
#include <asm-generic/bitops/fls.h>
#include <asm-generic/bitops/fls64.h>
diff --git a/include/asm-mips/compiler.h b/include/asm-mips/compiler.h
index aa6b876..71f5c5c 100644
--- a/include/asm-mips/compiler.h
+++ b/include/asm-mips/compiler.h
@@ -9,10 +9,10 @@
#define _ASM_COMPILER_H
#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ >= 4)
-#define GCC_IMM_ASM "n"
+#define GCC_IMM_ASM() "n"
#define GCC_REG_ACCUM "$0"
#else
-#define GCC_IMM_ASM "rn"
+#define GCC_IMM_ASM() "rn"
#define GCC_REG_ACCUM "accum"
#endif
diff --git a/include/asm-mips/gic.h b/include/asm-mips/gic.h
index 01b2f92..3a492f2 100644
--- a/include/asm-mips/gic.h
+++ b/include/asm-mips/gic.h
@@ -330,7 +330,7 @@
#define GIC_SH_RMASK_OFS 0x0300
#define GIC_CLR_INTR_MASK(intr, val) \
- GICWRITE(GIC_REG_ADDR(SHARED, GIC_SH_RMASK_OFS + 4 + (((((intr) / 32) ^ 1) - 1) * 4)), ((val) << ((intr) % 32))
+ GICWRITE(GIC_REG_ADDR(SHARED, GIC_SH_RMASK_OFS + 4 + (((((intr) / 32) ^ 1) - 1) * 4)), ((val) << ((intr) % 32)))
/* Register Map for Local Section */
#define GIC_VPE_CTL_OFS 0x0000
diff --git a/include/asm-mips/mach-au1x00/au1000.h b/include/asm-mips/mach-au1x00/au1000.h
index a0555516..1b5064d 100644
--- a/include/asm-mips/mach-au1x00/au1000.h
+++ b/include/asm-mips/mach-au1x00/au1000.h
@@ -40,8 +40,8 @@
#include <linux/delay.h>
#include <linux/types.h>
-#include <asm/io.h>
-#include <asm/irq.h>
+#include <linux/io.h>
+#include <linux/irq.h>
/* cpu pipeline flush */
void static inline au_sync(void)
@@ -63,32 +63,32 @@
void static inline au_writeb(u8 val, unsigned long reg)
{
- *(volatile u8 *)(reg) = val;
+ *(volatile u8 *)reg = val;
}
void static inline au_writew(u16 val, unsigned long reg)
{
- *(volatile u16 *)(reg) = val;
+ *(volatile u16 *)reg = val;
}
void static inline au_writel(u32 val, unsigned long reg)
{
- *(volatile u32 *)(reg) = val;
+ *(volatile u32 *)reg = val;
}
static inline u8 au_readb(unsigned long reg)
{
- return (*(volatile u8 *)reg);
+ return *(volatile u8 *)reg;
}
static inline u16 au_readw(unsigned long reg)
{
- return (*(volatile u16 *)reg);
+ return *(volatile u16 *)reg;
}
static inline u32 au_readl(unsigned long reg)
{
- return (*(volatile u32 *)reg);
+ return *(volatile u32 *)reg;
}
@@ -117,76 +117,77 @@
#endif /* !defined (_LANGUAGE_ASSEMBLY) */
/*
- * SDRAM Register Offsets
+ * SDRAM register offsets
*/
-#if defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1100)
-#define MEM_SDMODE0 (0x0000)
-#define MEM_SDMODE1 (0x0004)
-#define MEM_SDMODE2 (0x0008)
-#define MEM_SDADDR0 (0x000C)
-#define MEM_SDADDR1 (0x0010)
-#define MEM_SDADDR2 (0x0014)
-#define MEM_SDREFCFG (0x0018)
-#define MEM_SDPRECMD (0x001C)
-#define MEM_SDAUTOREF (0x0020)
-#define MEM_SDWRMD0 (0x0024)
-#define MEM_SDWRMD1 (0x0028)
-#define MEM_SDWRMD2 (0x002C)
-#define MEM_SDSLEEP (0x0030)
-#define MEM_SDSMCKE (0x0034)
+#if defined(CONFIG_SOC_AU1000) || defined(CONFIG_SOC_AU1500) || \
+ defined(CONFIG_SOC_AU1100)
+#define MEM_SDMODE0 0x0000
+#define MEM_SDMODE1 0x0004
+#define MEM_SDMODE2 0x0008
+#define MEM_SDADDR0 0x000C
+#define MEM_SDADDR1 0x0010
+#define MEM_SDADDR2 0x0014
+#define MEM_SDREFCFG 0x0018
+#define MEM_SDPRECMD 0x001C
+#define MEM_SDAUTOREF 0x0020
+#define MEM_SDWRMD0 0x0024
+#define MEM_SDWRMD1 0x0028
+#define MEM_SDWRMD2 0x002C
+#define MEM_SDSLEEP 0x0030
+#define MEM_SDSMCKE 0x0034
/*
* MEM_SDMODE register content definitions
*/
-#define MEM_SDMODE_F (1<<22)
-#define MEM_SDMODE_SR (1<<21)
-#define MEM_SDMODE_BS (1<<20)
-#define MEM_SDMODE_RS (3<<18)
-#define MEM_SDMODE_CS (7<<15)
-#define MEM_SDMODE_TRAS (15<<11)
-#define MEM_SDMODE_TMRD (3<<9)
-#define MEM_SDMODE_TWR (3<<7)
-#define MEM_SDMODE_TRP (3<<5)
-#define MEM_SDMODE_TRCD (3<<3)
-#define MEM_SDMODE_TCL (7<<0)
+#define MEM_SDMODE_F (1 << 22)
+#define MEM_SDMODE_SR (1 << 21)
+#define MEM_SDMODE_BS (1 << 20)
+#define MEM_SDMODE_RS (3 << 18)
+#define MEM_SDMODE_CS (7 << 15)
+#define MEM_SDMODE_TRAS (15 << 11)
+#define MEM_SDMODE_TMRD (3 << 9)
+#define MEM_SDMODE_TWR (3 << 7)
+#define MEM_SDMODE_TRP (3 << 5)
+#define MEM_SDMODE_TRCD (3 << 3)
+#define MEM_SDMODE_TCL (7 << 0)
-#define MEM_SDMODE_BS_2Bank (0<<20)
-#define MEM_SDMODE_BS_4Bank (1<<20)
-#define MEM_SDMODE_RS_11Row (0<<18)
-#define MEM_SDMODE_RS_12Row (1<<18)
-#define MEM_SDMODE_RS_13Row (2<<18)
-#define MEM_SDMODE_RS_N(N) ((N)<<18)
-#define MEM_SDMODE_CS_7Col (0<<15)
-#define MEM_SDMODE_CS_8Col (1<<15)
-#define MEM_SDMODE_CS_9Col (2<<15)
-#define MEM_SDMODE_CS_10Col (3<<15)
-#define MEM_SDMODE_CS_11Col (4<<15)
-#define MEM_SDMODE_CS_N(N) ((N)<<15)
-#define MEM_SDMODE_TRAS_N(N) ((N)<<11)
-#define MEM_SDMODE_TMRD_N(N) ((N)<<9)
-#define MEM_SDMODE_TWR_N(N) ((N)<<7)
-#define MEM_SDMODE_TRP_N(N) ((N)<<5)
-#define MEM_SDMODE_TRCD_N(N) ((N)<<3)
-#define MEM_SDMODE_TCL_N(N) ((N)<<0)
+#define MEM_SDMODE_BS_2Bank (0 << 20)
+#define MEM_SDMODE_BS_4Bank (1 << 20)
+#define MEM_SDMODE_RS_11Row (0 << 18)
+#define MEM_SDMODE_RS_12Row (1 << 18)
+#define MEM_SDMODE_RS_13Row (2 << 18)
+#define MEM_SDMODE_RS_N(N) ((N) << 18)
+#define MEM_SDMODE_CS_7Col (0 << 15)
+#define MEM_SDMODE_CS_8Col (1 << 15)
+#define MEM_SDMODE_CS_9Col (2 << 15)
+#define MEM_SDMODE_CS_10Col (3 << 15)
+#define MEM_SDMODE_CS_11Col (4 << 15)
+#define MEM_SDMODE_CS_N(N) ((N) << 15)
+#define MEM_SDMODE_TRAS_N(N) ((N) << 11)
+#define MEM_SDMODE_TMRD_N(N) ((N) << 9)
+#define MEM_SDMODE_TWR_N(N) ((N) << 7)
+#define MEM_SDMODE_TRP_N(N) ((N) << 5)
+#define MEM_SDMODE_TRCD_N(N) ((N) << 3)
+#define MEM_SDMODE_TCL_N(N) ((N) << 0)
/*
* MEM_SDADDR register contents definitions
*/
-#define MEM_SDADDR_E (1<<20)
-#define MEM_SDADDR_CSBA (0x03FF<<10)
-#define MEM_SDADDR_CSMASK (0x03FF<<0)
-#define MEM_SDADDR_CSBA_N(N) ((N)&(0x03FF<<22)>>12)
-#define MEM_SDADDR_CSMASK_N(N) ((N)&(0x03FF<<22)>>22)
+#define MEM_SDADDR_E (1 << 20)
+#define MEM_SDADDR_CSBA (0x03FF << 10)
+#define MEM_SDADDR_CSMASK (0x03FF << 0)
+#define MEM_SDADDR_CSBA_N(N) ((N) & (0x03FF << 22) >> 12)
+#define MEM_SDADDR_CSMASK_N(N) ((N)&(0x03FF << 22) >> 22)
/*
* MEM_SDREFCFG register content definitions
*/
-#define MEM_SDREFCFG_TRC (15<<28)
-#define MEM_SDREFCFG_TRPM (3<<26)
-#define MEM_SDREFCFG_E (1<<25)
-#define MEM_SDREFCFG_RE (0x1ffffff<<0)
-#define MEM_SDREFCFG_TRC_N(N) ((N)<<MEM_SDREFCFG_TRC)
-#define MEM_SDREFCFG_TRPM_N(N) ((N)<<MEM_SDREFCFG_TRPM)
+#define MEM_SDREFCFG_TRC (15 << 28)
+#define MEM_SDREFCFG_TRPM (3 << 26)
+#define MEM_SDREFCFG_E (1 << 25)
+#define MEM_SDREFCFG_RE (0x1ffffff << 0)
+#define MEM_SDREFCFG_TRC_N(N) ((N) << MEM_SDREFCFG_TRC)
+#define MEM_SDREFCFG_TRPM_N(N) ((N) << MEM_SDREFCFG_TRPM)
#define MEM_SDREFCFG_REF_N(N) (N)
#endif
@@ -199,25 +200,25 @@
/***********************************************************************/
#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200)
-#define MEM_SDMODE0 (0x0800)
-#define MEM_SDMODE1 (0x0808)
-#define MEM_SDMODE2 (0x0810)
-#define MEM_SDADDR0 (0x0820)
-#define MEM_SDADDR1 (0x0828)
-#define MEM_SDADDR2 (0x0830)
-#define MEM_SDCONFIGA (0x0840)
-#define MEM_SDCONFIGB (0x0848)
-#define MEM_SDSTAT (0x0850)
-#define MEM_SDERRADDR (0x0858)
-#define MEM_SDSTRIDE0 (0x0860)
-#define MEM_SDSTRIDE1 (0x0868)
-#define MEM_SDSTRIDE2 (0x0870)
-#define MEM_SDWRMD0 (0x0880)
-#define MEM_SDWRMD1 (0x0888)
-#define MEM_SDWRMD2 (0x0890)
-#define MEM_SDPRECMD (0x08C0)
-#define MEM_SDAUTOREF (0x08C8)
-#define MEM_SDSREF (0x08D0)
+#define MEM_SDMODE0 0x0800
+#define MEM_SDMODE1 0x0808
+#define MEM_SDMODE2 0x0810
+#define MEM_SDADDR0 0x0820
+#define MEM_SDADDR1 0x0828
+#define MEM_SDADDR2 0x0830
+#define MEM_SDCONFIGA 0x0840
+#define MEM_SDCONFIGB 0x0848
+#define MEM_SDSTAT 0x0850
+#define MEM_SDERRADDR 0x0858
+#define MEM_SDSTRIDE0 0x0860
+#define MEM_SDSTRIDE1 0x0868
+#define MEM_SDSTRIDE2 0x0870
+#define MEM_SDWRMD0 0x0880
+#define MEM_SDWRMD1 0x0888
+#define MEM_SDWRMD2 0x0890
+#define MEM_SDPRECMD 0x08C0
+#define MEM_SDAUTOREF 0x08C8
+#define MEM_SDSREF 0x08D0
#define MEM_SDSLEEP MEM_SDSREF
#endif
@@ -256,9 +257,9 @@
#define SSI0_PHYS_ADDR 0x11600000
#define SSI1_PHYS_ADDR 0x11680000
#define SYS_PHYS_ADDR 0x11900000
-#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL
-#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL
-#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL
+#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL
+#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL
+#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL
#endif
/********************************************************************/
@@ -290,13 +291,13 @@
#define UART3_PHYS_ADDR 0x11400000
#define GPIO2_PHYS_ADDR 0x11700000
#define SYS_PHYS_ADDR 0x11900000
-#define PCI_MEM_PHYS_ADDR 0x400000000ULL
-#define PCI_IO_PHYS_ADDR 0x500000000ULL
-#define PCI_CONFIG0_PHYS_ADDR 0x600000000ULL
-#define PCI_CONFIG1_PHYS_ADDR 0x680000000ULL
-#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL
-#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL
-#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL
+#define PCI_MEM_PHYS_ADDR 0x400000000ULL
+#define PCI_IO_PHYS_ADDR 0x500000000ULL
+#define PCI_CONFIG0_PHYS_ADDR 0x600000000ULL
+#define PCI_CONFIG1_PHYS_ADDR 0x680000000ULL
+#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL
+#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL
+#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL
#endif
/********************************************************************/
@@ -333,9 +334,9 @@
#define GPIO2_PHYS_ADDR 0x11700000
#define SYS_PHYS_ADDR 0x11900000
#define LCD_PHYS_ADDR 0x15000000
-#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL
-#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL
-#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL
+#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL
+#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL
+#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL
#endif
/***********************************************************************/
@@ -360,17 +361,17 @@
#define SYS_PHYS_ADDR 0x11900000
#define DDMA_PHYS_ADDR 0x14002000
#define PE_PHYS_ADDR 0x14008000
-#define PSC0_PHYS_ADDR 0x11A00000
-#define PSC1_PHYS_ADDR 0x11B00000
-#define PSC2_PHYS_ADDR 0x10A00000
-#define PSC3_PHYS_ADDR 0x10B00000
-#define PCI_MEM_PHYS_ADDR 0x400000000ULL
-#define PCI_IO_PHYS_ADDR 0x500000000ULL
-#define PCI_CONFIG0_PHYS_ADDR 0x600000000ULL
-#define PCI_CONFIG1_PHYS_ADDR 0x680000000ULL
-#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL
-#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL
-#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL
+#define PSC0_PHYS_ADDR 0x11A00000
+#define PSC1_PHYS_ADDR 0x11B00000
+#define PSC2_PHYS_ADDR 0x10A00000
+#define PSC3_PHYS_ADDR 0x10B00000
+#define PCI_MEM_PHYS_ADDR 0x400000000ULL
+#define PCI_IO_PHYS_ADDR 0x500000000ULL
+#define PCI_CONFIG0_PHYS_ADDR 0x600000000ULL
+#define PCI_CONFIG1_PHYS_ADDR 0x680000000ULL
+#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL
+#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL
+#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL
#endif
/***********************************************************************/
@@ -397,122 +398,121 @@
#define SWCNT_PHYS_ADDR 0x1110010C
#define MAEFE_PHYS_ADDR 0x14012000
#define MAEBE_PHYS_ADDR 0x14010000
-#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL
-#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL
-#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL
+#define PCMCIA_IO_PHYS_ADDR 0xF00000000ULL
+#define PCMCIA_ATTR_PHYS_ADDR 0xF40000000ULL
+#define PCMCIA_MEM_PHYS_ADDR 0xF80000000ULL
#endif
-
/* Static Bus Controller */
-#define MEM_STCFG0 0xB4001000
-#define MEM_STTIME0 0xB4001004
-#define MEM_STADDR0 0xB4001008
+#define MEM_STCFG0 0xB4001000
+#define MEM_STTIME0 0xB4001004
+#define MEM_STADDR0 0xB4001008
-#define MEM_STCFG1 0xB4001010
-#define MEM_STTIME1 0xB4001014
-#define MEM_STADDR1 0xB4001018
+#define MEM_STCFG1 0xB4001010
+#define MEM_STTIME1 0xB4001014
+#define MEM_STADDR1 0xB4001018
-#define MEM_STCFG2 0xB4001020
-#define MEM_STTIME2 0xB4001024
-#define MEM_STADDR2 0xB4001028
+#define MEM_STCFG2 0xB4001020
+#define MEM_STTIME2 0xB4001024
+#define MEM_STADDR2 0xB4001028
-#define MEM_STCFG3 0xB4001030
-#define MEM_STTIME3 0xB4001034
-#define MEM_STADDR3 0xB4001038
+#define MEM_STCFG3 0xB4001030
+#define MEM_STTIME3 0xB4001034
+#define MEM_STADDR3 0xB4001038
#if defined(CONFIG_SOC_AU1550) || defined(CONFIG_SOC_AU1200)
-#define MEM_STNDCTL 0xB4001100
-#define MEM_STSTAT 0xB4001104
+#define MEM_STNDCTL 0xB4001100
+#define MEM_STSTAT 0xB4001104
-#define MEM_STNAND_CMD (0x0)
-#define MEM_STNAND_ADDR (0x4)
-#define MEM_STNAND_DATA (0x20)
+#define MEM_STNAND_CMD 0x0
+#define MEM_STNAND_ADDR 0x4
+#define MEM_STNAND_DATA 0x20
#endif
/* Interrupt Controller 0 */
-#define IC0_CFG0RD 0xB0400040
-#define IC0_CFG0SET 0xB0400040
-#define IC0_CFG0CLR 0xB0400044
+#define IC0_CFG0RD 0xB0400040
+#define IC0_CFG0SET 0xB0400040
+#define IC0_CFG0CLR 0xB0400044
-#define IC0_CFG1RD 0xB0400048
-#define IC0_CFG1SET 0xB0400048
-#define IC0_CFG1CLR 0xB040004C
+#define IC0_CFG1RD 0xB0400048
+#define IC0_CFG1SET 0xB0400048
+#define IC0_CFG1CLR 0xB040004C
-#define IC0_CFG2RD 0xB0400050
-#define IC0_CFG2SET 0xB0400050
-#define IC0_CFG2CLR 0xB0400054
+#define IC0_CFG2RD 0xB0400050
+#define IC0_CFG2SET 0xB0400050
+#define IC0_CFG2CLR 0xB0400054
-#define IC0_REQ0INT 0xB0400054
-#define IC0_SRCRD 0xB0400058
-#define IC0_SRCSET 0xB0400058
-#define IC0_SRCCLR 0xB040005C
-#define IC0_REQ1INT 0xB040005C
+#define IC0_REQ0INT 0xB0400054
+#define IC0_SRCRD 0xB0400058
+#define IC0_SRCSET 0xB0400058
+#define IC0_SRCCLR 0xB040005C
+#define IC0_REQ1INT 0xB040005C
-#define IC0_ASSIGNRD 0xB0400060
-#define IC0_ASSIGNSET 0xB0400060
-#define IC0_ASSIGNCLR 0xB0400064
+#define IC0_ASSIGNRD 0xB0400060
+#define IC0_ASSIGNSET 0xB0400060
+#define IC0_ASSIGNCLR 0xB0400064
-#define IC0_WAKERD 0xB0400068
-#define IC0_WAKESET 0xB0400068
-#define IC0_WAKECLR 0xB040006C
+#define IC0_WAKERD 0xB0400068
+#define IC0_WAKESET 0xB0400068
+#define IC0_WAKECLR 0xB040006C
-#define IC0_MASKRD 0xB0400070
-#define IC0_MASKSET 0xB0400070
-#define IC0_MASKCLR 0xB0400074
+#define IC0_MASKRD 0xB0400070
+#define IC0_MASKSET 0xB0400070
+#define IC0_MASKCLR 0xB0400074
-#define IC0_RISINGRD 0xB0400078
-#define IC0_RISINGCLR 0xB0400078
-#define IC0_FALLINGRD 0xB040007C
-#define IC0_FALLINGCLR 0xB040007C
+#define IC0_RISINGRD 0xB0400078
+#define IC0_RISINGCLR 0xB0400078
+#define IC0_FALLINGRD 0xB040007C
+#define IC0_FALLINGCLR 0xB040007C
-#define IC0_TESTBIT 0xB0400080
+#define IC0_TESTBIT 0xB0400080
/* Interrupt Controller 1 */
-#define IC1_CFG0RD 0xB1800040
-#define IC1_CFG0SET 0xB1800040
-#define IC1_CFG0CLR 0xB1800044
+#define IC1_CFG0RD 0xB1800040
+#define IC1_CFG0SET 0xB1800040
+#define IC1_CFG0CLR 0xB1800044
-#define IC1_CFG1RD 0xB1800048
-#define IC1_CFG1SET 0xB1800048
-#define IC1_CFG1CLR 0xB180004C
+#define IC1_CFG1RD 0xB1800048
+#define IC1_CFG1SET 0xB1800048
+#define IC1_CFG1CLR 0xB180004C
-#define IC1_CFG2RD 0xB1800050
-#define IC1_CFG2SET 0xB1800050
-#define IC1_CFG2CLR 0xB1800054
+#define IC1_CFG2RD 0xB1800050
+#define IC1_CFG2SET 0xB1800050
+#define IC1_CFG2CLR 0xB1800054
-#define IC1_REQ0INT 0xB1800054
-#define IC1_SRCRD 0xB1800058
-#define IC1_SRCSET 0xB1800058
-#define IC1_SRCCLR 0xB180005C
-#define IC1_REQ1INT 0xB180005C
+#define IC1_REQ0INT 0xB1800054
+#define IC1_SRCRD 0xB1800058
+#define IC1_SRCSET 0xB1800058
+#define IC1_SRCCLR 0xB180005C
+#define IC1_REQ1INT 0xB180005C
-#define IC1_ASSIGNRD 0xB1800060
-#define IC1_ASSIGNSET 0xB1800060
-#define IC1_ASSIGNCLR 0xB1800064
+#define IC1_ASSIGNRD 0xB1800060
+#define IC1_ASSIGNSET 0xB1800060
+#define IC1_ASSIGNCLR 0xB1800064
-#define IC1_WAKERD 0xB1800068
-#define IC1_WAKESET 0xB1800068
-#define IC1_WAKECLR 0xB180006C
+#define IC1_WAKERD 0xB1800068
+#define IC1_WAKESET 0xB1800068
+#define IC1_WAKECLR 0xB180006C
-#define IC1_MASKRD 0xB1800070
-#define IC1_MASKSET 0xB1800070
-#define IC1_MASKCLR 0xB1800074
+#define IC1_MASKRD 0xB1800070
+#define IC1_MASKSET 0xB1800070
+#define IC1_MASKCLR 0xB1800074
-#define IC1_RISINGRD 0xB1800078
-#define IC1_RISINGCLR 0xB1800078
-#define IC1_FALLINGRD 0xB180007C
-#define IC1_FALLINGCLR 0xB180007C
+#define IC1_RISINGRD 0xB1800078
+#define IC1_RISINGCLR 0xB1800078
+#define IC1_FALLINGRD 0xB180007C
+#define IC1_FALLINGCLR 0xB180007C
-#define IC1_TESTBIT 0xB1800080
+#define IC1_TESTBIT 0xB1800080
/* Interrupt Configuration Modes */
-#define INTC_INT_DISABLED 0
-#define INTC_INT_RISE_EDGE 0x1
-#define INTC_INT_FALL_EDGE 0x2
-#define INTC_INT_RISE_AND_FALL_EDGE 0x3
-#define INTC_INT_HIGH_LEVEL 0x5
-#define INTC_INT_LOW_LEVEL 0x6
-#define INTC_INT_HIGH_AND_LOW_LEVEL 0x7
+#define INTC_INT_DISABLED 0x0
+#define INTC_INT_RISE_EDGE 0x1
+#define INTC_INT_FALL_EDGE 0x2
+#define INTC_INT_RISE_AND_FALL_EDGE 0x3
+#define INTC_INT_HIGH_LEVEL 0x5
+#define INTC_INT_LOW_LEVEL 0x6
+#define INTC_INT_HIGH_AND_LOW_LEVEL 0x7
/* Interrupt Numbers */
/* Au1000 */
@@ -579,18 +579,18 @@
AU1000_GPIO_31,
};
-#define UART0_ADDR 0xB1100000
-#define UART1_ADDR 0xB1200000
-#define UART2_ADDR 0xB1300000
-#define UART3_ADDR 0xB1400000
+#define UART0_ADDR 0xB1100000
+#define UART1_ADDR 0xB1200000
+#define UART2_ADDR 0xB1300000
+#define UART3_ADDR 0xB1400000
-#define USB_OHCI_BASE 0x10100000 // phys addr for ioremap
-#define USB_HOST_CONFIG 0xB017fffc
+#define USB_OHCI_BASE 0x10100000 /* phys addr for ioremap */
+#define USB_HOST_CONFIG 0xB017FFFC
-#define AU1000_ETH0_BASE 0xB0500000
-#define AU1000_ETH1_BASE 0xB0510000
-#define AU1000_MAC0_ENABLE 0xB0520000
-#define AU1000_MAC1_ENABLE 0xB0520004
+#define AU1000_ETH0_BASE 0xB0500000
+#define AU1000_ETH1_BASE 0xB0510000
+#define AU1000_MAC0_ENABLE 0xB0520000
+#define AU1000_MAC1_ENABLE 0xB0520004
#define NUM_ETH_INTERFACES 2
#endif /* CONFIG_SOC_AU1000 */
@@ -662,16 +662,16 @@
#define INTC AU1000_PCI_INTC
#define INTD AU1000_PCI_INTD
-#define UART0_ADDR 0xB1100000
-#define UART3_ADDR 0xB1400000
+#define UART0_ADDR 0xB1100000
+#define UART3_ADDR 0xB1400000
-#define USB_OHCI_BASE 0x10100000 // phys addr for ioremap
-#define USB_HOST_CONFIG 0xB017fffc
+#define USB_OHCI_BASE 0x10100000 /* phys addr for ioremap */
+#define USB_HOST_CONFIG 0xB017fffc
-#define AU1500_ETH0_BASE 0xB1500000
-#define AU1500_ETH1_BASE 0xB1510000
-#define AU1500_MAC0_ENABLE 0xB1520000
-#define AU1500_MAC1_ENABLE 0xB1520004
+#define AU1500_ETH0_BASE 0xB1500000
+#define AU1500_ETH1_BASE 0xB1510000
+#define AU1500_MAC0_ENABLE 0xB1520000
+#define AU1500_MAC1_ENABLE 0xB1520004
#define NUM_ETH_INTERFACES 2
#endif /* CONFIG_SOC_AU1500 */
@@ -739,15 +739,15 @@
AU1000_GPIO_31,
};
-#define UART0_ADDR 0xB1100000
-#define UART1_ADDR 0xB1200000
-#define UART3_ADDR 0xB1400000
+#define UART0_ADDR 0xB1100000
+#define UART1_ADDR 0xB1200000
+#define UART3_ADDR 0xB1400000
-#define USB_OHCI_BASE 0x10100000 // phys addr for ioremap
-#define USB_HOST_CONFIG 0xB017fffc
+#define USB_OHCI_BASE 0x10100000 /* phys addr for ioremap */
+#define USB_HOST_CONFIG 0xB017FFFC
-#define AU1100_ETH0_BASE 0xB0500000
-#define AU1100_MAC0_ENABLE 0xB0520000
+#define AU1100_ETH0_BASE 0xB0500000
+#define AU1100_MAC0_ENABLE 0xB0520000
#define NUM_ETH_INTERFACES 1
#endif /* CONFIG_SOC_AU1100 */
@@ -826,18 +826,18 @@
#define INTC AU1550_PCI_INTC
#define INTD AU1550_PCI_INTD
-#define UART0_ADDR 0xB1100000
-#define UART1_ADDR 0xB1200000
-#define UART3_ADDR 0xB1400000
+#define UART0_ADDR 0xB1100000
+#define UART1_ADDR 0xB1200000
+#define UART3_ADDR 0xB1400000
-#define USB_OHCI_BASE 0x14020000 // phys addr for ioremap
-#define USB_OHCI_LEN 0x00060000
-#define USB_HOST_CONFIG 0xB4027ffc
+#define USB_OHCI_BASE 0x14020000 /* phys addr for ioremap */
+#define USB_OHCI_LEN 0x00060000
+#define USB_HOST_CONFIG 0xB4027ffc
-#define AU1550_ETH0_BASE 0xB0500000
-#define AU1550_ETH1_BASE 0xB0510000
-#define AU1550_MAC0_ENABLE 0xB0520000
-#define AU1550_MAC1_ENABLE 0xB0520004
+#define AU1550_ETH0_BASE 0xB0500000
+#define AU1550_ETH1_BASE 0xB0510000
+#define AU1550_MAC0_ENABLE 0xB0520000
+#define AU1550_MAC1_ENABLE 0xB0520004
#define NUM_ETH_INTERFACES 2
#endif /* CONFIG_SOC_AU1550 */
@@ -911,32 +911,32 @@
AU1000_GPIO_31,
};
-#define UART0_ADDR 0xB1100000
-#define UART1_ADDR 0xB1200000
+#define UART0_ADDR 0xB1100000
+#define UART1_ADDR 0xB1200000
-#define USB_UOC_BASE 0x14020020
-#define USB_UOC_LEN 0x20
-#define USB_OHCI_BASE 0x14020100
-#define USB_OHCI_LEN 0x100
-#define USB_EHCI_BASE 0x14020200
-#define USB_EHCI_LEN 0x100
-#define USB_UDC_BASE 0x14022000
-#define USB_UDC_LEN 0x2000
-#define USB_MSR_BASE 0xB4020000
-#define USB_MSR_MCFG 4
-#define USBMSRMCFG_OMEMEN 0
-#define USBMSRMCFG_OBMEN 1
-#define USBMSRMCFG_EMEMEN 2
-#define USBMSRMCFG_EBMEN 3
-#define USBMSRMCFG_DMEMEN 4
-#define USBMSRMCFG_DBMEN 5
-#define USBMSRMCFG_GMEMEN 6
-#define USBMSRMCFG_OHCCLKEN 16
-#define USBMSRMCFG_EHCCLKEN 17
-#define USBMSRMCFG_UDCCLKEN 18
-#define USBMSRMCFG_PHYPLLEN 19
-#define USBMSRMCFG_RDCOMB 30
-#define USBMSRMCFG_PFEN 31
+#define USB_UOC_BASE 0x14020020
+#define USB_UOC_LEN 0x20
+#define USB_OHCI_BASE 0x14020100
+#define USB_OHCI_LEN 0x100
+#define USB_EHCI_BASE 0x14020200
+#define USB_EHCI_LEN 0x100
+#define USB_UDC_BASE 0x14022000
+#define USB_UDC_LEN 0x2000
+#define USB_MSR_BASE 0xB4020000
+#define USB_MSR_MCFG 4
+#define USBMSRMCFG_OMEMEN 0
+#define USBMSRMCFG_OBMEN 1
+#define USBMSRMCFG_EMEMEN 2
+#define USBMSRMCFG_EBMEN 3
+#define USBMSRMCFG_DMEMEN 4
+#define USBMSRMCFG_DBMEN 5
+#define USBMSRMCFG_GMEMEN 6
+#define USBMSRMCFG_OHCCLKEN 16
+#define USBMSRMCFG_EHCCLKEN 17
+#define USBMSRMCFG_UDCCLKEN 18
+#define USBMSRMCFG_PHYPLLEN 19
+#define USBMSRMCFG_RDCOMB 30
+#define USBMSRMCFG_PFEN 31
#endif /* CONFIG_SOC_AU1200 */
@@ -949,259 +949,258 @@
#define INTX 0xFF /* not valid */
/* Programmable Counters 0 and 1 */
-#define SYS_BASE 0xB1900000
-#define SYS_COUNTER_CNTRL (SYS_BASE + 0x14)
-# define SYS_CNTRL_E1S (1<<23)
-# define SYS_CNTRL_T1S (1<<20)
-# define SYS_CNTRL_M21 (1<<19)
-# define SYS_CNTRL_M11 (1<<18)
-# define SYS_CNTRL_M01 (1<<17)
-# define SYS_CNTRL_C1S (1<<16)
-# define SYS_CNTRL_BP (1<<14)
-# define SYS_CNTRL_EN1 (1<<13)
-# define SYS_CNTRL_BT1 (1<<12)
-# define SYS_CNTRL_EN0 (1<<11)
-# define SYS_CNTRL_BT0 (1<<10)
-# define SYS_CNTRL_E0 (1<<8)
-# define SYS_CNTRL_E0S (1<<7)
-# define SYS_CNTRL_32S (1<<5)
-# define SYS_CNTRL_T0S (1<<4)
-# define SYS_CNTRL_M20 (1<<3)
-# define SYS_CNTRL_M10 (1<<2)
-# define SYS_CNTRL_M00 (1<<1)
-# define SYS_CNTRL_C0S (1<<0)
+#define SYS_BASE 0xB1900000
+#define SYS_COUNTER_CNTRL (SYS_BASE + 0x14)
+# define SYS_CNTRL_E1S (1 << 23)
+# define SYS_CNTRL_T1S (1 << 20)
+# define SYS_CNTRL_M21 (1 << 19)
+# define SYS_CNTRL_M11 (1 << 18)
+# define SYS_CNTRL_M01 (1 << 17)
+# define SYS_CNTRL_C1S (1 << 16)
+# define SYS_CNTRL_BP (1 << 14)
+# define SYS_CNTRL_EN1 (1 << 13)
+# define SYS_CNTRL_BT1 (1 << 12)
+# define SYS_CNTRL_EN0 (1 << 11)
+# define SYS_CNTRL_BT0 (1 << 10)
+# define SYS_CNTRL_E0 (1 << 8)
+# define SYS_CNTRL_E0S (1 << 7)
+# define SYS_CNTRL_32S (1 << 5)
+# define SYS_CNTRL_T0S (1 << 4)
+# define SYS_CNTRL_M20 (1 << 3)
+# define SYS_CNTRL_M10 (1 << 2)
+# define SYS_CNTRL_M00 (1 << 1)
+# define SYS_CNTRL_C0S (1 << 0)
/* Programmable Counter 0 Registers */
-#define SYS_TOYTRIM (SYS_BASE + 0)
-#define SYS_TOYWRITE (SYS_BASE + 4)
-#define SYS_TOYMATCH0 (SYS_BASE + 8)
-#define SYS_TOYMATCH1 (SYS_BASE + 0xC)
-#define SYS_TOYMATCH2 (SYS_BASE + 0x10)
-#define SYS_TOYREAD (SYS_BASE + 0x40)
+#define SYS_TOYTRIM (SYS_BASE + 0)
+#define SYS_TOYWRITE (SYS_BASE + 4)
+#define SYS_TOYMATCH0 (SYS_BASE + 8)
+#define SYS_TOYMATCH1 (SYS_BASE + 0xC)
+#define SYS_TOYMATCH2 (SYS_BASE + 0x10)
+#define SYS_TOYREAD (SYS_BASE + 0x40)
/* Programmable Counter 1 Registers */
-#define SYS_RTCTRIM (SYS_BASE + 0x44)
-#define SYS_RTCWRITE (SYS_BASE + 0x48)
-#define SYS_RTCMATCH0 (SYS_BASE + 0x4C)
-#define SYS_RTCMATCH1 (SYS_BASE + 0x50)
-#define SYS_RTCMATCH2 (SYS_BASE + 0x54)
-#define SYS_RTCREAD (SYS_BASE + 0x58)
+#define SYS_RTCTRIM (SYS_BASE + 0x44)
+#define SYS_RTCWRITE (SYS_BASE + 0x48)
+#define SYS_RTCMATCH0 (SYS_BASE + 0x4C)
+#define SYS_RTCMATCH1 (SYS_BASE + 0x50)
+#define SYS_RTCMATCH2 (SYS_BASE + 0x54)
+#define SYS_RTCREAD (SYS_BASE + 0x58)
/* I2S Controller */
-#define I2S_DATA 0xB1000000
-# define I2S_DATA_MASK (0xffffff)
-#define I2S_CONFIG 0xB1000004
-# define I2S_CONFIG_XU (1<<25)
-# define I2S_CONFIG_XO (1<<24)
-# define I2S_CONFIG_RU (1<<23)
-# define I2S_CONFIG_RO (1<<22)
-# define I2S_CONFIG_TR (1<<21)
-# define I2S_CONFIG_TE (1<<20)
-# define I2S_CONFIG_TF (1<<19)
-# define I2S_CONFIG_RR (1<<18)
-# define I2S_CONFIG_RE (1<<17)
-# define I2S_CONFIG_RF (1<<16)
-# define I2S_CONFIG_PD (1<<11)
-# define I2S_CONFIG_LB (1<<10)
-# define I2S_CONFIG_IC (1<<9)
-# define I2S_CONFIG_FM_BIT 7
-# define I2S_CONFIG_FM_MASK (0x3 << I2S_CONFIG_FM_BIT)
-# define I2S_CONFIG_FM_I2S (0x0 << I2S_CONFIG_FM_BIT)
-# define I2S_CONFIG_FM_LJ (0x1 << I2S_CONFIG_FM_BIT)
-# define I2S_CONFIG_FM_RJ (0x2 << I2S_CONFIG_FM_BIT)
-# define I2S_CONFIG_TN (1<<6)
-# define I2S_CONFIG_RN (1<<5)
-# define I2S_CONFIG_SZ_BIT 0
-# define I2S_CONFIG_SZ_MASK (0x1F << I2S_CONFIG_SZ_BIT)
+#define I2S_DATA 0xB1000000
+# define I2S_DATA_MASK 0xffffff
+#define I2S_CONFIG 0xB1000004
+# define I2S_CONFIG_XU (1 << 25)
+# define I2S_CONFIG_XO (1 << 24)
+# define I2S_CONFIG_RU (1 << 23)
+# define I2S_CONFIG_RO (1 << 22)
+# define I2S_CONFIG_TR (1 << 21)
+# define I2S_CONFIG_TE (1 << 20)
+# define I2S_CONFIG_TF (1 << 19)
+# define I2S_CONFIG_RR (1 << 18)
+# define I2S_CONFIG_RE (1 << 17)
+# define I2S_CONFIG_RF (1 << 16)
+# define I2S_CONFIG_PD (1 << 11)
+# define I2S_CONFIG_LB (1 << 10)
+# define I2S_CONFIG_IC (1 << 9)
+# define I2S_CONFIG_FM_BIT 7
+# define I2S_CONFIG_FM_MASK (0x3 << I2S_CONFIG_FM_BIT)
+# define I2S_CONFIG_FM_I2S (0x0 << I2S_CONFIG_FM_BIT)
+# define I2S_CONFIG_FM_LJ (0x1 << I2S_CONFIG_FM_BIT)
+# define I2S_CONFIG_FM_RJ (0x2 << I2S_CONFIG_FM_BIT)
+# define I2S_CONFIG_TN (1 << 6)
+# define I2S_CONFIG_RN (1 << 5)
+# define I2S_CONFIG_SZ_BIT 0
+# define I2S_CONFIG_SZ_MASK (0x1F << I2S_CONFIG_SZ_BIT)
-#define I2S_CONTROL 0xB1000008
-# define I2S_CONTROL_D (1<<1)
-# define I2S_CONTROL_CE (1<<0)
+#define I2S_CONTROL 0xB1000008
+# define I2S_CONTROL_D (1 << 1)
+# define I2S_CONTROL_CE (1 << 0)
/* USB Host Controller */
#ifndef USB_OHCI_LEN
-#define USB_OHCI_LEN 0x00100000
+#define USB_OHCI_LEN 0x00100000
#endif
#ifndef CONFIG_SOC_AU1200
/* USB Device Controller */
-#define USBD_EP0RD 0xB0200000
-#define USBD_EP0WR 0xB0200004
-#define USBD_EP2WR 0xB0200008
-#define USBD_EP3WR 0xB020000C
-#define USBD_EP4RD 0xB0200010
-#define USBD_EP5RD 0xB0200014
-#define USBD_INTEN 0xB0200018
-#define USBD_INTSTAT 0xB020001C
-# define USBDEV_INT_SOF (1<<12)
-# define USBDEV_INT_HF_BIT 6
-# define USBDEV_INT_HF_MASK (0x3f << USBDEV_INT_HF_BIT)
-# define USBDEV_INT_CMPLT_BIT 0
+#define USBD_EP0RD 0xB0200000
+#define USBD_EP0WR 0xB0200004
+#define USBD_EP2WR 0xB0200008
+#define USBD_EP3WR 0xB020000C
+#define USBD_EP4RD 0xB0200010
+#define USBD_EP5RD 0xB0200014
+#define USBD_INTEN 0xB0200018
+#define USBD_INTSTAT 0xB020001C
+# define USBDEV_INT_SOF (1 << 12)
+# define USBDEV_INT_HF_BIT 6
+# define USBDEV_INT_HF_MASK (0x3f << USBDEV_INT_HF_BIT)
+# define USBDEV_INT_CMPLT_BIT 0
# define USBDEV_INT_CMPLT_MASK (0x3f << USBDEV_INT_CMPLT_BIT)
-#define USBD_CONFIG 0xB0200020
-#define USBD_EP0CS 0xB0200024
-#define USBD_EP2CS 0xB0200028
-#define USBD_EP3CS 0xB020002C
-#define USBD_EP4CS 0xB0200030
-#define USBD_EP5CS 0xB0200034
-# define USBDEV_CS_SU (1<<14)
-# define USBDEV_CS_NAK (1<<13)
-# define USBDEV_CS_ACK (1<<12)
-# define USBDEV_CS_BUSY (1<<11)
-# define USBDEV_CS_TSIZE_BIT 1
-# define USBDEV_CS_TSIZE_MASK (0x3ff << USBDEV_CS_TSIZE_BIT)
-# define USBDEV_CS_STALL (1<<0)
-#define USBD_EP0RDSTAT 0xB0200040
-#define USBD_EP0WRSTAT 0xB0200044
-#define USBD_EP2WRSTAT 0xB0200048
-#define USBD_EP3WRSTAT 0xB020004C
-#define USBD_EP4RDSTAT 0xB0200050
-#define USBD_EP5RDSTAT 0xB0200054
-# define USBDEV_FSTAT_FLUSH (1<<6)
-# define USBDEV_FSTAT_UF (1<<5)
-# define USBDEV_FSTAT_OF (1<<4)
-# define USBDEV_FSTAT_FCNT_BIT 0
+#define USBD_CONFIG 0xB0200020
+#define USBD_EP0CS 0xB0200024
+#define USBD_EP2CS 0xB0200028
+#define USBD_EP3CS 0xB020002C
+#define USBD_EP4CS 0xB0200030
+#define USBD_EP5CS 0xB0200034
+# define USBDEV_CS_SU (1 << 14)
+# define USBDEV_CS_NAK (1 << 13)
+# define USBDEV_CS_ACK (1 << 12)
+# define USBDEV_CS_BUSY (1 << 11)
+# define USBDEV_CS_TSIZE_BIT 1
+# define USBDEV_CS_TSIZE_MASK (0x3ff << USBDEV_CS_TSIZE_BIT)
+# define USBDEV_CS_STALL (1 << 0)
+#define USBD_EP0RDSTAT 0xB0200040
+#define USBD_EP0WRSTAT 0xB0200044
+#define USBD_EP2WRSTAT 0xB0200048
+#define USBD_EP3WRSTAT 0xB020004C
+#define USBD_EP4RDSTAT 0xB0200050
+#define USBD_EP5RDSTAT 0xB0200054
+# define USBDEV_FSTAT_FLUSH (1 << 6)
+# define USBDEV_FSTAT_UF (1 << 5)
+# define USBDEV_FSTAT_OF (1 << 4)
+# define USBDEV_FSTAT_FCNT_BIT 0
# define USBDEV_FSTAT_FCNT_MASK (0x0f << USBDEV_FSTAT_FCNT_BIT)
-#define USBD_ENABLE 0xB0200058
-# define USBDEV_ENABLE (1<<1)
-# define USBDEV_CE (1<<0)
+#define USBD_ENABLE 0xB0200058
+# define USBDEV_ENABLE (1 << 1)
+# define USBDEV_CE (1 << 0)
#endif /* !CONFIG_SOC_AU1200 */
/* Ethernet Controllers */
/* 4 byte offsets from AU1000_ETH_BASE */
-#define MAC_CONTROL 0x0
-# define MAC_RX_ENABLE (1<<2)
-# define MAC_TX_ENABLE (1<<3)
-# define MAC_DEF_CHECK (1<<5)
-# define MAC_SET_BL(X) (((X)&0x3)<<6)
-# define MAC_AUTO_PAD (1<<8)
-# define MAC_DISABLE_RETRY (1<<10)
-# define MAC_DISABLE_BCAST (1<<11)
-# define MAC_LATE_COL (1<<12)
-# define MAC_HASH_MODE (1<<13)
-# define MAC_HASH_ONLY (1<<15)
-# define MAC_PASS_ALL (1<<16)
-# define MAC_INVERSE_FILTER (1<<17)
-# define MAC_PROMISCUOUS (1<<18)
-# define MAC_PASS_ALL_MULTI (1<<19)
-# define MAC_FULL_DUPLEX (1<<20)
-# define MAC_NORMAL_MODE 0
-# define MAC_INT_LOOPBACK (1<<21)
-# define MAC_EXT_LOOPBACK (1<<22)
-# define MAC_DISABLE_RX_OWN (1<<23)
-# define MAC_BIG_ENDIAN (1<<30)
-# define MAC_RX_ALL (1<<31)
-#define MAC_ADDRESS_HIGH 0x4
-#define MAC_ADDRESS_LOW 0x8
-#define MAC_MCAST_HIGH 0xC
-#define MAC_MCAST_LOW 0x10
-#define MAC_MII_CNTRL 0x14
-# define MAC_MII_BUSY (1<<0)
-# define MAC_MII_READ 0
-# define MAC_MII_WRITE (1<<1)
-# define MAC_SET_MII_SELECT_REG(X) (((X)&0x1f)<<6)
-# define MAC_SET_MII_SELECT_PHY(X) (((X)&0x1f)<<11)
-#define MAC_MII_DATA 0x18
-#define MAC_FLOW_CNTRL 0x1C
-# define MAC_FLOW_CNTRL_BUSY (1<<0)
-# define MAC_FLOW_CNTRL_ENABLE (1<<1)
-# define MAC_PASS_CONTROL (1<<2)
-# define MAC_SET_PAUSE(X) (((X)&0xffff)<<16)
-#define MAC_VLAN1_TAG 0x20
-#define MAC_VLAN2_TAG 0x24
+#define MAC_CONTROL 0x0
+# define MAC_RX_ENABLE (1 << 2)
+# define MAC_TX_ENABLE (1 << 3)
+# define MAC_DEF_CHECK (1 << 5)
+# define MAC_SET_BL(X) (((X) & 0x3) << 6)
+# define MAC_AUTO_PAD (1 << 8)
+# define MAC_DISABLE_RETRY (1 << 10)
+# define MAC_DISABLE_BCAST (1 << 11)
+# define MAC_LATE_COL (1 << 12)
+# define MAC_HASH_MODE (1 << 13)
+# define MAC_HASH_ONLY (1 << 15)
+# define MAC_PASS_ALL (1 << 16)
+# define MAC_INVERSE_FILTER (1 << 17)
+# define MAC_PROMISCUOUS (1 << 18)
+# define MAC_PASS_ALL_MULTI (1 << 19)
+# define MAC_FULL_DUPLEX (1 << 20)
+# define MAC_NORMAL_MODE 0
+# define MAC_INT_LOOPBACK (1 << 21)
+# define MAC_EXT_LOOPBACK (1 << 22)
+# define MAC_DISABLE_RX_OWN (1 << 23)
+# define MAC_BIG_ENDIAN (1 << 30)
+# define MAC_RX_ALL (1 << 31)
+#define MAC_ADDRESS_HIGH 0x4
+#define MAC_ADDRESS_LOW 0x8
+#define MAC_MCAST_HIGH 0xC
+#define MAC_MCAST_LOW 0x10
+#define MAC_MII_CNTRL 0x14
+# define MAC_MII_BUSY (1 << 0)
+# define MAC_MII_READ 0
+# define MAC_MII_WRITE (1 << 1)
+# define MAC_SET_MII_SELECT_REG(X) (((X) & 0x1f) << 6)
+# define MAC_SET_MII_SELECT_PHY(X) (((X) & 0x1f) << 11)
+#define MAC_MII_DATA 0x18
+#define MAC_FLOW_CNTRL 0x1C
+# define MAC_FLOW_CNTRL_BUSY (1 << 0)
+# define MAC_FLOW_CNTRL_ENABLE (1 << 1)
+# define MAC_PASS_CONTROL (1 << 2)
+# define MAC_SET_PAUSE(X) (((X) & 0xffff) << 16)
+#define MAC_VLAN1_TAG 0x20
+#define MAC_VLAN2_TAG 0x24
/* Ethernet Controller Enable */
-# define MAC_EN_CLOCK_ENABLE (1<<0)
-# define MAC_EN_RESET0 (1<<1)
-# define MAC_EN_TOSS (0<<2)
-# define MAC_EN_CACHEABLE (1<<3)
-# define MAC_EN_RESET1 (1<<4)
-# define MAC_EN_RESET2 (1<<5)
-# define MAC_DMA_RESET (1<<6)
+# define MAC_EN_CLOCK_ENABLE (1 << 0)
+# define MAC_EN_RESET0 (1 << 1)
+# define MAC_EN_TOSS (0 << 2)
+# define MAC_EN_CACHEABLE (1 << 3)
+# define MAC_EN_RESET1 (1 << 4)
+# define MAC_EN_RESET2 (1 << 5)
+# define MAC_DMA_RESET (1 << 6)
/* Ethernet Controller DMA Channels */
-#define MAC0_TX_DMA_ADDR 0xB4004000
-#define MAC1_TX_DMA_ADDR 0xB4004200
+#define MAC0_TX_DMA_ADDR 0xB4004000
+#define MAC1_TX_DMA_ADDR 0xB4004200
/* offsets from MAC_TX_RING_ADDR address */
-#define MAC_TX_BUFF0_STATUS 0x0
-# define TX_FRAME_ABORTED (1<<0)
-# define TX_JAB_TIMEOUT (1<<1)
-# define TX_NO_CARRIER (1<<2)
-# define TX_LOSS_CARRIER (1<<3)
-# define TX_EXC_DEF (1<<4)
-# define TX_LATE_COLL_ABORT (1<<5)
-# define TX_EXC_COLL (1<<6)
-# define TX_UNDERRUN (1<<7)
-# define TX_DEFERRED (1<<8)
-# define TX_LATE_COLL (1<<9)
-# define TX_COLL_CNT_MASK (0xF<<10)
-# define TX_PKT_RETRY (1<<31)
-#define MAC_TX_BUFF0_ADDR 0x4
-# define TX_DMA_ENABLE (1<<0)
-# define TX_T_DONE (1<<1)
-# define TX_GET_DMA_BUFFER(X) (((X)>>2)&0x3)
-#define MAC_TX_BUFF0_LEN 0x8
-#define MAC_TX_BUFF1_STATUS 0x10
-#define MAC_TX_BUFF1_ADDR 0x14
-#define MAC_TX_BUFF1_LEN 0x18
-#define MAC_TX_BUFF2_STATUS 0x20
-#define MAC_TX_BUFF2_ADDR 0x24
-#define MAC_TX_BUFF2_LEN 0x28
-#define MAC_TX_BUFF3_STATUS 0x30
-#define MAC_TX_BUFF3_ADDR 0x34
-#define MAC_TX_BUFF3_LEN 0x38
+#define MAC_TX_BUFF0_STATUS 0x0
+# define TX_FRAME_ABORTED (1 << 0)
+# define TX_JAB_TIMEOUT (1 << 1)
+# define TX_NO_CARRIER (1 << 2)
+# define TX_LOSS_CARRIER (1 << 3)
+# define TX_EXC_DEF (1 << 4)
+# define TX_LATE_COLL_ABORT (1 << 5)
+# define TX_EXC_COLL (1 << 6)
+# define TX_UNDERRUN (1 << 7)
+# define TX_DEFERRED (1 << 8)
+# define TX_LATE_COLL (1 << 9)
+# define TX_COLL_CNT_MASK (0xF << 10)
+# define TX_PKT_RETRY (1 << 31)
+#define MAC_TX_BUFF0_ADDR 0x4
+# define TX_DMA_ENABLE (1 << 0)
+# define TX_T_DONE (1 << 1)
+# define TX_GET_DMA_BUFFER(X) (((X) >> 2) & 0x3)
+#define MAC_TX_BUFF0_LEN 0x8
+#define MAC_TX_BUFF1_STATUS 0x10
+#define MAC_TX_BUFF1_ADDR 0x14
+#define MAC_TX_BUFF1_LEN 0x18
+#define MAC_TX_BUFF2_STATUS 0x20
+#define MAC_TX_BUFF2_ADDR 0x24
+#define MAC_TX_BUFF2_LEN 0x28
+#define MAC_TX_BUFF3_STATUS 0x30
+#define MAC_TX_BUFF3_ADDR 0x34
+#define MAC_TX_BUFF3_LEN 0x38
-#define MAC0_RX_DMA_ADDR 0xB4004100
-#define MAC1_RX_DMA_ADDR 0xB4004300
+#define MAC0_RX_DMA_ADDR 0xB4004100
+#define MAC1_RX_DMA_ADDR 0xB4004300
/* offsets from MAC_RX_RING_ADDR */
-#define MAC_RX_BUFF0_STATUS 0x0
-# define RX_FRAME_LEN_MASK 0x3fff
-# define RX_WDOG_TIMER (1<<14)
-# define RX_RUNT (1<<15)
-# define RX_OVERLEN (1<<16)
-# define RX_COLL (1<<17)
-# define RX_ETHER (1<<18)
-# define RX_MII_ERROR (1<<19)
-# define RX_DRIBBLING (1<<20)
-# define RX_CRC_ERROR (1<<21)
-# define RX_VLAN1 (1<<22)
-# define RX_VLAN2 (1<<23)
-# define RX_LEN_ERROR (1<<24)
-# define RX_CNTRL_FRAME (1<<25)
-# define RX_U_CNTRL_FRAME (1<<26)
-# define RX_MCAST_FRAME (1<<27)
-# define RX_BCAST_FRAME (1<<28)
-# define RX_FILTER_FAIL (1<<29)
-# define RX_PACKET_FILTER (1<<30)
-# define RX_MISSED_FRAME (1<<31)
+#define MAC_RX_BUFF0_STATUS 0x0
+# define RX_FRAME_LEN_MASK 0x3fff
+# define RX_WDOG_TIMER (1 << 14)
+# define RX_RUNT (1 << 15)
+# define RX_OVERLEN (1 << 16)
+# define RX_COLL (1 << 17)
+# define RX_ETHER (1 << 18)
+# define RX_MII_ERROR (1 << 19)
+# define RX_DRIBBLING (1 << 20)
+# define RX_CRC_ERROR (1 << 21)
+# define RX_VLAN1 (1 << 22)
+# define RX_VLAN2 (1 << 23)
+# define RX_LEN_ERROR (1 << 24)
+# define RX_CNTRL_FRAME (1 << 25)
+# define RX_U_CNTRL_FRAME (1 << 26)
+# define RX_MCAST_FRAME (1 << 27)
+# define RX_BCAST_FRAME (1 << 28)
+# define RX_FILTER_FAIL (1 << 29)
+# define RX_PACKET_FILTER (1 << 30)
+# define RX_MISSED_FRAME (1 << 31)
# define RX_ERROR (RX_WDOG_TIMER | RX_RUNT | RX_OVERLEN | \
- RX_COLL | RX_MII_ERROR | RX_CRC_ERROR | \
- RX_LEN_ERROR | RX_U_CNTRL_FRAME | RX_MISSED_FRAME)
-#define MAC_RX_BUFF0_ADDR 0x4
-# define RX_DMA_ENABLE (1<<0)
-# define RX_T_DONE (1<<1)
-# define RX_GET_DMA_BUFFER(X) (((X)>>2)&0x3)
-# define RX_SET_BUFF_ADDR(X) ((X)&0xffffffc0)
-#define MAC_RX_BUFF1_STATUS 0x10
-#define MAC_RX_BUFF1_ADDR 0x14
-#define MAC_RX_BUFF2_STATUS 0x20
-#define MAC_RX_BUFF2_ADDR 0x24
-#define MAC_RX_BUFF3_STATUS 0x30
-#define MAC_RX_BUFF3_ADDR 0x34
-
+ RX_COLL | RX_MII_ERROR | RX_CRC_ERROR | \
+ RX_LEN_ERROR | RX_U_CNTRL_FRAME | RX_MISSED_FRAME)
+#define MAC_RX_BUFF0_ADDR 0x4
+# define RX_DMA_ENABLE (1 << 0)
+# define RX_T_DONE (1 << 1)
+# define RX_GET_DMA_BUFFER(X) (((X) >> 2) & 0x3)
+# define RX_SET_BUFF_ADDR(X) ((X) & 0xffffffc0)
+#define MAC_RX_BUFF1_STATUS 0x10
+#define MAC_RX_BUFF1_ADDR 0x14
+#define MAC_RX_BUFF2_STATUS 0x20
+#define MAC_RX_BUFF2_ADDR 0x24
+#define MAC_RX_BUFF3_STATUS 0x30
+#define MAC_RX_BUFF3_ADDR 0x34
/* UARTS 0-3 */
-#define UART_BASE UART0_ADDR
+#define UART_BASE UART0_ADDR
#ifdef CONFIG_SOC_AU1200
-#define UART_DEBUG_BASE UART1_ADDR
+#define UART_DEBUG_BASE UART1_ADDR
#else
-#define UART_DEBUG_BASE UART3_ADDR
+#define UART_DEBUG_BASE UART3_ADDR
#endif
#define UART_RX 0 /* Receive buffer */
@@ -1294,341 +1293,337 @@
#define UART_MSR_DCTS 0x01 /* Delta CTS */
#define UART_MSR_ANY_DELTA 0x0F /* Any of the delta bits! */
-
-
/* SSIO */
-#define SSI0_STATUS 0xB1600000
-# define SSI_STATUS_BF (1<<4)
-# define SSI_STATUS_OF (1<<3)
-# define SSI_STATUS_UF (1<<2)
-# define SSI_STATUS_D (1<<1)
-# define SSI_STATUS_B (1<<0)
-#define SSI0_INT 0xB1600004
-# define SSI_INT_OI (1<<3)
-# define SSI_INT_UI (1<<2)
-# define SSI_INT_DI (1<<1)
-#define SSI0_INT_ENABLE 0xB1600008
-# define SSI_INTE_OIE (1<<3)
-# define SSI_INTE_UIE (1<<2)
-# define SSI_INTE_DIE (1<<1)
-#define SSI0_CONFIG 0xB1600020
-# define SSI_CONFIG_AO (1<<24)
-# define SSI_CONFIG_DO (1<<23)
-# define SSI_CONFIG_ALEN_BIT 20
-# define SSI_CONFIG_ALEN_MASK (0x7<<20)
-# define SSI_CONFIG_DLEN_BIT 16
-# define SSI_CONFIG_DLEN_MASK (0x7<<16)
-# define SSI_CONFIG_DD (1<<11)
-# define SSI_CONFIG_AD (1<<10)
-# define SSI_CONFIG_BM_BIT 8
-# define SSI_CONFIG_BM_MASK (0x3<<8)
-# define SSI_CONFIG_CE (1<<7)
-# define SSI_CONFIG_DP (1<<6)
-# define SSI_CONFIG_DL (1<<5)
-# define SSI_CONFIG_EP (1<<4)
-#define SSI0_ADATA 0xB1600024
-# define SSI_AD_D (1<<24)
-# define SSI_AD_ADDR_BIT 16
-# define SSI_AD_ADDR_MASK (0xff<<16)
-# define SSI_AD_DATA_BIT 0
-# define SSI_AD_DATA_MASK (0xfff<<0)
-#define SSI0_CLKDIV 0xB1600028
-#define SSI0_CONTROL 0xB1600100
-# define SSI_CONTROL_CD (1<<1)
-# define SSI_CONTROL_E (1<<0)
+#define SSI0_STATUS 0xB1600000
+# define SSI_STATUS_BF (1 << 4)
+# define SSI_STATUS_OF (1 << 3)
+# define SSI_STATUS_UF (1 << 2)
+# define SSI_STATUS_D (1 << 1)
+# define SSI_STATUS_B (1 << 0)
+#define SSI0_INT 0xB1600004
+# define SSI_INT_OI (1 << 3)
+# define SSI_INT_UI (1 << 2)
+# define SSI_INT_DI (1 << 1)
+#define SSI0_INT_ENABLE 0xB1600008
+# define SSI_INTE_OIE (1 << 3)
+# define SSI_INTE_UIE (1 << 2)
+# define SSI_INTE_DIE (1 << 1)
+#define SSI0_CONFIG 0xB1600020
+# define SSI_CONFIG_AO (1 << 24)
+# define SSI_CONFIG_DO (1 << 23)
+# define SSI_CONFIG_ALEN_BIT 20
+# define SSI_CONFIG_ALEN_MASK (0x7 << 20)
+# define SSI_CONFIG_DLEN_BIT 16
+# define SSI_CONFIG_DLEN_MASK (0x7 << 16)
+# define SSI_CONFIG_DD (1 << 11)
+# define SSI_CONFIG_AD (1 << 10)
+# define SSI_CONFIG_BM_BIT 8
+# define SSI_CONFIG_BM_MASK (0x3 << 8)
+# define SSI_CONFIG_CE (1 << 7)
+# define SSI_CONFIG_DP (1 << 6)
+# define SSI_CONFIG_DL (1 << 5)
+# define SSI_CONFIG_EP (1 << 4)
+#define SSI0_ADATA 0xB1600024
+# define SSI_AD_D (1 << 24)
+# define SSI_AD_ADDR_BIT 16
+# define SSI_AD_ADDR_MASK (0xff << 16)
+# define SSI_AD_DATA_BIT 0
+# define SSI_AD_DATA_MASK (0xfff << 0)
+#define SSI0_CLKDIV 0xB1600028
+#define SSI0_CONTROL 0xB1600100
+# define SSI_CONTROL_CD (1 << 1)
+# define SSI_CONTROL_E (1 << 0)
/* SSI1 */
-#define SSI1_STATUS 0xB1680000
-#define SSI1_INT 0xB1680004
-#define SSI1_INT_ENABLE 0xB1680008
-#define SSI1_CONFIG 0xB1680020
-#define SSI1_ADATA 0xB1680024
-#define SSI1_CLKDIV 0xB1680028
-#define SSI1_ENABLE 0xB1680100
+#define SSI1_STATUS 0xB1680000
+#define SSI1_INT 0xB1680004
+#define SSI1_INT_ENABLE 0xB1680008
+#define SSI1_CONFIG 0xB1680020
+#define SSI1_ADATA 0xB1680024
+#define SSI1_CLKDIV 0xB1680028
+#define SSI1_ENABLE 0xB1680100
/*
* Register content definitions
*/
-#define SSI_STATUS_BF (1<<4)
-#define SSI_STATUS_OF (1<<3)
-#define SSI_STATUS_UF (1<<2)
-#define SSI_STATUS_D (1<<1)
-#define SSI_STATUS_B (1<<0)
+#define SSI_STATUS_BF (1 << 4)
+#define SSI_STATUS_OF (1 << 3)
+#define SSI_STATUS_UF (1 << 2)
+#define SSI_STATUS_D (1 << 1)
+#define SSI_STATUS_B (1 << 0)
/* SSI_INT */
-#define SSI_INT_OI (1<<3)
-#define SSI_INT_UI (1<<2)
-#define SSI_INT_DI (1<<1)
+#define SSI_INT_OI (1 << 3)
+#define SSI_INT_UI (1 << 2)
+#define SSI_INT_DI (1 << 1)
/* SSI_INTEN */
-#define SSI_INTEN_OIE (1<<3)
-#define SSI_INTEN_UIE (1<<2)
-#define SSI_INTEN_DIE (1<<1)
+#define SSI_INTEN_OIE (1 << 3)
+#define SSI_INTEN_UIE (1 << 2)
+#define SSI_INTEN_DIE (1 << 1)
-#define SSI_CONFIG_AO (1<<24)
-#define SSI_CONFIG_DO (1<<23)
-#define SSI_CONFIG_ALEN (7<<20)
-#define SSI_CONFIG_DLEN (15<<16)
-#define SSI_CONFIG_DD (1<<11)
-#define SSI_CONFIG_AD (1<<10)
-#define SSI_CONFIG_BM (3<<8)
-#define SSI_CONFIG_CE (1<<7)
-#define SSI_CONFIG_DP (1<<6)
-#define SSI_CONFIG_DL (1<<5)
-#define SSI_CONFIG_EP (1<<4)
-#define SSI_CONFIG_ALEN_N(N) ((N-1)<<20)
-#define SSI_CONFIG_DLEN_N(N) ((N-1)<<16)
-#define SSI_CONFIG_BM_HI (0<<8)
-#define SSI_CONFIG_BM_LO (1<<8)
-#define SSI_CONFIG_BM_CY (2<<8)
+#define SSI_CONFIG_AO (1 << 24)
+#define SSI_CONFIG_DO (1 << 23)
+#define SSI_CONFIG_ALEN (7 << 20)
+#define SSI_CONFIG_DLEN (15 << 16)
+#define SSI_CONFIG_DD (1 << 11)
+#define SSI_CONFIG_AD (1 << 10)
+#define SSI_CONFIG_BM (3 << 8)
+#define SSI_CONFIG_CE (1 << 7)
+#define SSI_CONFIG_DP (1 << 6)
+#define SSI_CONFIG_DL (1 << 5)
+#define SSI_CONFIG_EP (1 << 4)
+#define SSI_CONFIG_ALEN_N(N) ((N-1) << 20)
+#define SSI_CONFIG_DLEN_N(N) ((N-1) << 16)
+#define SSI_CONFIG_BM_HI (0 << 8)
+#define SSI_CONFIG_BM_LO (1 << 8)
+#define SSI_CONFIG_BM_CY (2 << 8)
-#define SSI_ADATA_D (1<<24)
-#define SSI_ADATA_ADDR (0xFF<<16)
-#define SSI_ADATA_DATA (0x0FFF)
-#define SSI_ADATA_ADDR_N(N) (N<<16)
+#define SSI_ADATA_D (1 << 24)
+#define SSI_ADATA_ADDR (0xFF << 16)
+#define SSI_ADATA_DATA 0x0FFF
+#define SSI_ADATA_ADDR_N(N) (N << 16)
-#define SSI_ENABLE_CD (1<<1)
-#define SSI_ENABLE_E (1<<0)
-
+#define SSI_ENABLE_CD (1 << 1)
+#define SSI_ENABLE_E (1 << 0)
/* IrDA Controller */
-#define IRDA_BASE 0xB0300000
-#define IR_RING_PTR_STATUS (IRDA_BASE+0x00)
-#define IR_RING_BASE_ADDR_H (IRDA_BASE+0x04)
-#define IR_RING_BASE_ADDR_L (IRDA_BASE+0x08)
-#define IR_RING_SIZE (IRDA_BASE+0x0C)
-#define IR_RING_PROMPT (IRDA_BASE+0x10)
-#define IR_RING_ADDR_CMPR (IRDA_BASE+0x14)
-#define IR_INT_CLEAR (IRDA_BASE+0x18)
-#define IR_CONFIG_1 (IRDA_BASE+0x20)
-# define IR_RX_INVERT_LED (1<<0)
-# define IR_TX_INVERT_LED (1<<1)
-# define IR_ST (1<<2)
-# define IR_SF (1<<3)
-# define IR_SIR (1<<4)
-# define IR_MIR (1<<5)
-# define IR_FIR (1<<6)
-# define IR_16CRC (1<<7)
-# define IR_TD (1<<8)
-# define IR_RX_ALL (1<<9)
-# define IR_DMA_ENABLE (1<<10)
-# define IR_RX_ENABLE (1<<11)
-# define IR_TX_ENABLE (1<<12)
-# define IR_LOOPBACK (1<<14)
-# define IR_SIR_MODE (IR_SIR | IR_DMA_ENABLE | \
- IR_RX_ALL | IR_RX_ENABLE | IR_SF | IR_16CRC)
-#define IR_SIR_FLAGS (IRDA_BASE+0x24)
-#define IR_ENABLE (IRDA_BASE+0x28)
-# define IR_RX_STATUS (1<<9)
-# define IR_TX_STATUS (1<<10)
-#define IR_READ_PHY_CONFIG (IRDA_BASE+0x2C)
-#define IR_WRITE_PHY_CONFIG (IRDA_BASE+0x30)
-#define IR_MAX_PKT_LEN (IRDA_BASE+0x34)
-#define IR_RX_BYTE_CNT (IRDA_BASE+0x38)
-#define IR_CONFIG_2 (IRDA_BASE+0x3C)
-# define IR_MODE_INV (1<<0)
-# define IR_ONE_PIN (1<<1)
-#define IR_INTERFACE_CONFIG (IRDA_BASE+0x40)
+#define IRDA_BASE 0xB0300000
+#define IR_RING_PTR_STATUS (IRDA_BASE + 0x00)
+#define IR_RING_BASE_ADDR_H (IRDA_BASE + 0x04)
+#define IR_RING_BASE_ADDR_L (IRDA_BASE + 0x08)
+#define IR_RING_SIZE (IRDA_BASE + 0x0C)
+#define IR_RING_PROMPT (IRDA_BASE + 0x10)
+#define IR_RING_ADDR_CMPR (IRDA_BASE + 0x14)
+#define IR_INT_CLEAR (IRDA_BASE + 0x18)
+#define IR_CONFIG_1 (IRDA_BASE + 0x20)
+# define IR_RX_INVERT_LED (1 << 0)
+# define IR_TX_INVERT_LED (1 << 1)
+# define IR_ST (1 << 2)
+# define IR_SF (1 << 3)
+# define IR_SIR (1 << 4)
+# define IR_MIR (1 << 5)
+# define IR_FIR (1 << 6)
+# define IR_16CRC (1 << 7)
+# define IR_TD (1 << 8)
+# define IR_RX_ALL (1 << 9)
+# define IR_DMA_ENABLE (1 << 10)
+# define IR_RX_ENABLE (1 << 11)
+# define IR_TX_ENABLE (1 << 12)
+# define IR_LOOPBACK (1 << 14)
+# define IR_SIR_MODE (IR_SIR | IR_DMA_ENABLE | \
+ IR_RX_ALL | IR_RX_ENABLE | IR_SF | IR_16CRC)
+#define IR_SIR_FLAGS (IRDA_BASE + 0x24)
+#define IR_ENABLE (IRDA_BASE + 0x28)
+# define IR_RX_STATUS (1 << 9)
+# define IR_TX_STATUS (1 << 10)
+#define IR_READ_PHY_CONFIG (IRDA_BASE + 0x2C)
+#define IR_WRITE_PHY_CONFIG (IRDA_BASE + 0x30)
+#define IR_MAX_PKT_LEN (IRDA_BASE + 0x34)
+#define IR_RX_BYTE_CNT (IRDA_BASE + 0x38)
+#define IR_CONFIG_2 (IRDA_BASE + 0x3C)
+# define IR_MODE_INV (1 << 0)
+# define IR_ONE_PIN (1 << 1)
+#define IR_INTERFACE_CONFIG (IRDA_BASE + 0x40)
/* GPIO */
-#define SYS_PINFUNC 0xB190002C
-# define SYS_PF_USB (1<<15) /* 2nd USB device/host */
-# define SYS_PF_U3 (1<<14) /* GPIO23/U3TXD */
-# define SYS_PF_U2 (1<<13) /* GPIO22/U2TXD */
-# define SYS_PF_U1 (1<<12) /* GPIO21/U1TXD */
-# define SYS_PF_SRC (1<<11) /* GPIO6/SROMCKE */
-# define SYS_PF_CK5 (1<<10) /* GPIO3/CLK5 */
-# define SYS_PF_CK4 (1<<9) /* GPIO2/CLK4 */
-# define SYS_PF_IRF (1<<8) /* GPIO15/IRFIRSEL */
-# define SYS_PF_UR3 (1<<7) /* GPIO[14:9]/UART3 */
-# define SYS_PF_I2D (1<<6) /* GPIO8/I2SDI */
-# define SYS_PF_I2S (1<<5) /* I2S/GPIO[29:31] */
-# define SYS_PF_NI2 (1<<4) /* NI2/GPIO[24:28] */
-# define SYS_PF_U0 (1<<3) /* U0TXD/GPIO20 */
-# define SYS_PF_RD (1<<2) /* IRTXD/GPIO19 */
-# define SYS_PF_A97 (1<<1) /* AC97/SSL1 */
-# define SYS_PF_S0 (1<<0) /* SSI_0/GPIO[16:18] */
+#define SYS_PINFUNC 0xB190002C
+# define SYS_PF_USB (1 << 15) /* 2nd USB device/host */
+# define SYS_PF_U3 (1 << 14) /* GPIO23/U3TXD */
+# define SYS_PF_U2 (1 << 13) /* GPIO22/U2TXD */
+# define SYS_PF_U1 (1 << 12) /* GPIO21/U1TXD */
+# define SYS_PF_SRC (1 << 11) /* GPIO6/SROMCKE */
+# define SYS_PF_CK5 (1 << 10) /* GPIO3/CLK5 */
+# define SYS_PF_CK4 (1 << 9) /* GPIO2/CLK4 */
+# define SYS_PF_IRF (1 << 8) /* GPIO15/IRFIRSEL */
+# define SYS_PF_UR3 (1 << 7) /* GPIO[14:9]/UART3 */
+# define SYS_PF_I2D (1 << 6) /* GPIO8/I2SDI */
+# define SYS_PF_I2S (1 << 5) /* I2S/GPIO[29:31] */
+# define SYS_PF_NI2 (1 << 4) /* NI2/GPIO[24:28] */
+# define SYS_PF_U0 (1 << 3) /* U0TXD/GPIO20 */
+# define SYS_PF_RD (1 << 2) /* IRTXD/GPIO19 */
+# define SYS_PF_A97 (1 << 1) /* AC97/SSL1 */
+# define SYS_PF_S0 (1 << 0) /* SSI_0/GPIO[16:18] */
-/* Au1100 Only */
-# define SYS_PF_PC (1<<18) /* PCMCIA/GPIO[207:204] */
-# define SYS_PF_LCD (1<<17) /* extern lcd/GPIO[203:200] */
-# define SYS_PF_CS (1<<16) /* EXTCLK0/32khz to gpio2 */
-# define SYS_PF_EX0 (1<<9) /* gpio2/clock */
+/* Au1100 only */
+# define SYS_PF_PC (1 << 18) /* PCMCIA/GPIO[207:204] */
+# define SYS_PF_LCD (1 << 17) /* extern lcd/GPIO[203:200] */
+# define SYS_PF_CS (1 << 16) /* EXTCLK0/32KHz to gpio2 */
+# define SYS_PF_EX0 (1 << 9) /* GPIO2/clock */
-/* Au1550 Only. Redefines lots of pins */
-# define SYS_PF_PSC2_MASK (7 << 17)
-# define SYS_PF_PSC2_AC97 (0)
-# define SYS_PF_PSC2_SPI (0)
-# define SYS_PF_PSC2_I2S (1 << 17)
-# define SYS_PF_PSC2_SMBUS (3 << 17)
-# define SYS_PF_PSC2_GPIO (7 << 17)
-# define SYS_PF_PSC3_MASK (7 << 20)
-# define SYS_PF_PSC3_AC97 (0)
-# define SYS_PF_PSC3_SPI (0)
-# define SYS_PF_PSC3_I2S (1 << 20)
-# define SYS_PF_PSC3_SMBUS (3 << 20)
-# define SYS_PF_PSC3_GPIO (7 << 20)
-# define SYS_PF_PSC1_S1 (1 << 1)
-# define SYS_PF_MUST_BE_SET ((1 << 5) | (1 << 2))
+/* Au1550 only. Redefines lots of pins */
+# define SYS_PF_PSC2_MASK (7 << 17)
+# define SYS_PF_PSC2_AC97 0
+# define SYS_PF_PSC2_SPI 0
+# define SYS_PF_PSC2_I2S (1 << 17)
+# define SYS_PF_PSC2_SMBUS (3 << 17)
+# define SYS_PF_PSC2_GPIO (7 << 17)
+# define SYS_PF_PSC3_MASK (7 << 20)
+# define SYS_PF_PSC3_AC97 0
+# define SYS_PF_PSC3_SPI 0
+# define SYS_PF_PSC3_I2S (1 << 20)
+# define SYS_PF_PSC3_SMBUS (3 << 20)
+# define SYS_PF_PSC3_GPIO (7 << 20)
+# define SYS_PF_PSC1_S1 (1 << 1)
+# define SYS_PF_MUST_BE_SET ((1 << 5) | (1 << 2))
-/* Au1200 Only */
+/* Au1200 only */
#ifdef CONFIG_SOC_AU1200
-#define SYS_PINFUNC_DMA (1<<31)
-#define SYS_PINFUNC_S0A (1<<30)
-#define SYS_PINFUNC_S1A (1<<29)
-#define SYS_PINFUNC_LP0 (1<<28)
-#define SYS_PINFUNC_LP1 (1<<27)
-#define SYS_PINFUNC_LD16 (1<<26)
-#define SYS_PINFUNC_LD8 (1<<25)
-#define SYS_PINFUNC_LD1 (1<<24)
-#define SYS_PINFUNC_LD0 (1<<23)
-#define SYS_PINFUNC_P1A (3<<21)
-#define SYS_PINFUNC_P1B (1<<20)
-#define SYS_PINFUNC_FS3 (1<<19)
-#define SYS_PINFUNC_P0A (3<<17)
-#define SYS_PINFUNC_CS (1<<16)
-#define SYS_PINFUNC_CIM (1<<15)
-#define SYS_PINFUNC_P1C (1<<14)
-#define SYS_PINFUNC_U1T (1<<12)
-#define SYS_PINFUNC_U1R (1<<11)
-#define SYS_PINFUNC_EX1 (1<<10)
-#define SYS_PINFUNC_EX0 (1<<9)
-#define SYS_PINFUNC_U0R (1<<8)
-#define SYS_PINFUNC_MC (1<<7)
-#define SYS_PINFUNC_S0B (1<<6)
-#define SYS_PINFUNC_S0C (1<<5)
-#define SYS_PINFUNC_P0B (1<<4)
-#define SYS_PINFUNC_U0T (1<<3)
-#define SYS_PINFUNC_S1B (1<<2)
+#define SYS_PINFUNC_DMA (1 << 31)
+#define SYS_PINFUNC_S0A (1 << 30)
+#define SYS_PINFUNC_S1A (1 << 29)
+#define SYS_PINFUNC_LP0 (1 << 28)
+#define SYS_PINFUNC_LP1 (1 << 27)
+#define SYS_PINFUNC_LD16 (1 << 26)
+#define SYS_PINFUNC_LD8 (1 << 25)
+#define SYS_PINFUNC_LD1 (1 << 24)
+#define SYS_PINFUNC_LD0 (1 << 23)
+#define SYS_PINFUNC_P1A (3 << 21)
+#define SYS_PINFUNC_P1B (1 << 20)
+#define SYS_PINFUNC_FS3 (1 << 19)
+#define SYS_PINFUNC_P0A (3 << 17)
+#define SYS_PINFUNC_CS (1 << 16)
+#define SYS_PINFUNC_CIM (1 << 15)
+#define SYS_PINFUNC_P1C (1 << 14)
+#define SYS_PINFUNC_U1T (1 << 12)
+#define SYS_PINFUNC_U1R (1 << 11)
+#define SYS_PINFUNC_EX1 (1 << 10)
+#define SYS_PINFUNC_EX0 (1 << 9)
+#define SYS_PINFUNC_U0R (1 << 8)
+#define SYS_PINFUNC_MC (1 << 7)
+#define SYS_PINFUNC_S0B (1 << 6)
+#define SYS_PINFUNC_S0C (1 << 5)
+#define SYS_PINFUNC_P0B (1 << 4)
+#define SYS_PINFUNC_U0T (1 << 3)
+#define SYS_PINFUNC_S1B (1 << 2)
#endif
-#define SYS_TRIOUTRD 0xB1900100
-#define SYS_TRIOUTCLR 0xB1900100
-#define SYS_OUTPUTRD 0xB1900108
-#define SYS_OUTPUTSET 0xB1900108
-#define SYS_OUTPUTCLR 0xB190010C
-#define SYS_PINSTATERD 0xB1900110
-#define SYS_PININPUTEN 0xB1900110
+#define SYS_TRIOUTRD 0xB1900100
+#define SYS_TRIOUTCLR 0xB1900100
+#define SYS_OUTPUTRD 0xB1900108
+#define SYS_OUTPUTSET 0xB1900108
+#define SYS_OUTPUTCLR 0xB190010C
+#define SYS_PINSTATERD 0xB1900110
+#define SYS_PININPUTEN 0xB1900110
/* GPIO2, Au1500, Au1550 only */
-#define GPIO2_BASE 0xB1700000
-#define GPIO2_DIR (GPIO2_BASE + 0)
-#define GPIO2_OUTPUT (GPIO2_BASE + 8)
-#define GPIO2_PINSTATE (GPIO2_BASE + 0xC)
-#define GPIO2_INTENABLE (GPIO2_BASE + 0x10)
-#define GPIO2_ENABLE (GPIO2_BASE + 0x14)
+#define GPIO2_BASE 0xB1700000
+#define GPIO2_DIR (GPIO2_BASE + 0)
+#define GPIO2_OUTPUT (GPIO2_BASE + 8)
+#define GPIO2_PINSTATE (GPIO2_BASE + 0xC)
+#define GPIO2_INTENABLE (GPIO2_BASE + 0x10)
+#define GPIO2_ENABLE (GPIO2_BASE + 0x14)
/* Power Management */
-#define SYS_SCRATCH0 0xB1900018
-#define SYS_SCRATCH1 0xB190001C
-#define SYS_WAKEMSK 0xB1900034
-#define SYS_ENDIAN 0xB1900038
-#define SYS_POWERCTRL 0xB190003C
-#define SYS_WAKESRC 0xB190005C
-#define SYS_SLPPWR 0xB1900078
-#define SYS_SLEEP 0xB190007C
+#define SYS_SCRATCH0 0xB1900018
+#define SYS_SCRATCH1 0xB190001C
+#define SYS_WAKEMSK 0xB1900034
+#define SYS_ENDIAN 0xB1900038
+#define SYS_POWERCTRL 0xB190003C
+#define SYS_WAKESRC 0xB190005C
+#define SYS_SLPPWR 0xB1900078
+#define SYS_SLEEP 0xB190007C
/* Clock Controller */
-#define SYS_FREQCTRL0 0xB1900020
-# define SYS_FC_FRDIV2_BIT 22
-# define SYS_FC_FRDIV2_MASK (0xff << SYS_FC_FRDIV2_BIT)
-# define SYS_FC_FE2 (1<<21)
-# define SYS_FC_FS2 (1<<20)
-# define SYS_FC_FRDIV1_BIT 12
-# define SYS_FC_FRDIV1_MASK (0xff << SYS_FC_FRDIV1_BIT)
-# define SYS_FC_FE1 (1<<11)
-# define SYS_FC_FS1 (1<<10)
-# define SYS_FC_FRDIV0_BIT 2
-# define SYS_FC_FRDIV0_MASK (0xff << SYS_FC_FRDIV0_BIT)
-# define SYS_FC_FE0 (1<<1)
-# define SYS_FC_FS0 (1<<0)
-#define SYS_FREQCTRL1 0xB1900024
-# define SYS_FC_FRDIV5_BIT 22
-# define SYS_FC_FRDIV5_MASK (0xff << SYS_FC_FRDIV5_BIT)
-# define SYS_FC_FE5 (1<<21)
-# define SYS_FC_FS5 (1<<20)
-# define SYS_FC_FRDIV4_BIT 12
-# define SYS_FC_FRDIV4_MASK (0xff << SYS_FC_FRDIV4_BIT)
-# define SYS_FC_FE4 (1<<11)
-# define SYS_FC_FS4 (1<<10)
-# define SYS_FC_FRDIV3_BIT 2
-# define SYS_FC_FRDIV3_MASK (0xff << SYS_FC_FRDIV3_BIT)
-# define SYS_FC_FE3 (1<<1)
-# define SYS_FC_FS3 (1<<0)
-#define SYS_CLKSRC 0xB1900028
-# define SYS_CS_ME1_BIT 27
-# define SYS_CS_ME1_MASK (0x7<<SYS_CS_ME1_BIT)
-# define SYS_CS_DE1 (1<<26)
-# define SYS_CS_CE1 (1<<25)
-# define SYS_CS_ME0_BIT 22
-# define SYS_CS_ME0_MASK (0x7<<SYS_CS_ME0_BIT)
-# define SYS_CS_DE0 (1<<21)
-# define SYS_CS_CE0 (1<<20)
-# define SYS_CS_MI2_BIT 17
-# define SYS_CS_MI2_MASK (0x7<<SYS_CS_MI2_BIT)
-# define SYS_CS_DI2 (1<<16)
-# define SYS_CS_CI2 (1<<15)
+#define SYS_FREQCTRL0 0xB1900020
+# define SYS_FC_FRDIV2_BIT 22
+# define SYS_FC_FRDIV2_MASK (0xff << SYS_FC_FRDIV2_BIT)
+# define SYS_FC_FE2 (1 << 21)
+# define SYS_FC_FS2 (1 << 20)
+# define SYS_FC_FRDIV1_BIT 12
+# define SYS_FC_FRDIV1_MASK (0xff << SYS_FC_FRDIV1_BIT)
+# define SYS_FC_FE1 (1 << 11)
+# define SYS_FC_FS1 (1 << 10)
+# define SYS_FC_FRDIV0_BIT 2
+# define SYS_FC_FRDIV0_MASK (0xff << SYS_FC_FRDIV0_BIT)
+# define SYS_FC_FE0 (1 << 1)
+# define SYS_FC_FS0 (1 << 0)
+#define SYS_FREQCTRL1 0xB1900024
+# define SYS_FC_FRDIV5_BIT 22
+# define SYS_FC_FRDIV5_MASK (0xff << SYS_FC_FRDIV5_BIT)
+# define SYS_FC_FE5 (1 << 21)
+# define SYS_FC_FS5 (1 << 20)
+# define SYS_FC_FRDIV4_BIT 12
+# define SYS_FC_FRDIV4_MASK (0xff << SYS_FC_FRDIV4_BIT)
+# define SYS_FC_FE4 (1 << 11)
+# define SYS_FC_FS4 (1 << 10)
+# define SYS_FC_FRDIV3_BIT 2
+# define SYS_FC_FRDIV3_MASK (0xff << SYS_FC_FRDIV3_BIT)
+# define SYS_FC_FE3 (1 << 1)
+# define SYS_FC_FS3 (1 << 0)
+#define SYS_CLKSRC 0xB1900028
+# define SYS_CS_ME1_BIT 27
+# define SYS_CS_ME1_MASK (0x7 << SYS_CS_ME1_BIT)
+# define SYS_CS_DE1 (1 << 26)
+# define SYS_CS_CE1 (1 << 25)
+# define SYS_CS_ME0_BIT 22
+# define SYS_CS_ME0_MASK (0x7 << SYS_CS_ME0_BIT)
+# define SYS_CS_DE0 (1 << 21)
+# define SYS_CS_CE0 (1 << 20)
+# define SYS_CS_MI2_BIT 17
+# define SYS_CS_MI2_MASK (0x7 << SYS_CS_MI2_BIT)
+# define SYS_CS_DI2 (1 << 16)
+# define SYS_CS_CI2 (1 << 15)
#ifdef CONFIG_SOC_AU1100
-# define SYS_CS_ML_BIT 7
-# define SYS_CS_ML_MASK (0x7<<SYS_CS_ML_BIT)
-# define SYS_CS_DL (1<<6)
-# define SYS_CS_CL (1<<5)
+# define SYS_CS_ML_BIT 7
+# define SYS_CS_ML_MASK (0x7 << SYS_CS_ML_BIT)
+# define SYS_CS_DL (1 << 6)
+# define SYS_CS_CL (1 << 5)
#else
-# define SYS_CS_MUH_BIT 12
-# define SYS_CS_MUH_MASK (0x7<<SYS_CS_MUH_BIT)
-# define SYS_CS_DUH (1<<11)
-# define SYS_CS_CUH (1<<10)
-# define SYS_CS_MUD_BIT 7
-# define SYS_CS_MUD_MASK (0x7<<SYS_CS_MUD_BIT)
-# define SYS_CS_DUD (1<<6)
-# define SYS_CS_CUD (1<<5)
+# define SYS_CS_MUH_BIT 12
+# define SYS_CS_MUH_MASK (0x7 << SYS_CS_MUH_BIT)
+# define SYS_CS_DUH (1 << 11)
+# define SYS_CS_CUH (1 << 10)
+# define SYS_CS_MUD_BIT 7
+# define SYS_CS_MUD_MASK (0x7 << SYS_CS_MUD_BIT)
+# define SYS_CS_DUD (1 << 6)
+# define SYS_CS_CUD (1 << 5)
#endif
-# define SYS_CS_MIR_BIT 2
-# define SYS_CS_MIR_MASK (0x7<<SYS_CS_MIR_BIT)
-# define SYS_CS_DIR (1<<1)
-# define SYS_CS_CIR (1<<0)
+# define SYS_CS_MIR_BIT 2
+# define SYS_CS_MIR_MASK (0x7 << SYS_CS_MIR_BIT)
+# define SYS_CS_DIR (1 << 1)
+# define SYS_CS_CIR (1 << 0)
-# define SYS_CS_MUX_AUX 0x1
-# define SYS_CS_MUX_FQ0 0x2
-# define SYS_CS_MUX_FQ1 0x3
-# define SYS_CS_MUX_FQ2 0x4
-# define SYS_CS_MUX_FQ3 0x5
-# define SYS_CS_MUX_FQ4 0x6
-# define SYS_CS_MUX_FQ5 0x7
-#define SYS_CPUPLL 0xB1900060
-#define SYS_AUXPLL 0xB1900064
+# define SYS_CS_MUX_AUX 0x1
+# define SYS_CS_MUX_FQ0 0x2
+# define SYS_CS_MUX_FQ1 0x3
+# define SYS_CS_MUX_FQ2 0x4
+# define SYS_CS_MUX_FQ3 0x5
+# define SYS_CS_MUX_FQ4 0x6
+# define SYS_CS_MUX_FQ5 0x7
+#define SYS_CPUPLL 0xB1900060
+#define SYS_AUXPLL 0xB1900064
/* AC97 Controller */
-#define AC97C_CONFIG 0xB0000000
-# define AC97C_RECV_SLOTS_BIT 13
+#define AC97C_CONFIG 0xB0000000
+# define AC97C_RECV_SLOTS_BIT 13
# define AC97C_RECV_SLOTS_MASK (0x3ff << AC97C_RECV_SLOTS_BIT)
-# define AC97C_XMIT_SLOTS_BIT 3
+# define AC97C_XMIT_SLOTS_BIT 3
# define AC97C_XMIT_SLOTS_MASK (0x3ff << AC97C_XMIT_SLOTS_BIT)
-# define AC97C_SG (1<<2)
-# define AC97C_SYNC (1<<1)
-# define AC97C_RESET (1<<0)
-#define AC97C_STATUS 0xB0000004
-# define AC97C_XU (1<<11)
-# define AC97C_XO (1<<10)
-# define AC97C_RU (1<<9)
-# define AC97C_RO (1<<8)
-# define AC97C_READY (1<<7)
-# define AC97C_CP (1<<6)
-# define AC97C_TR (1<<5)
-# define AC97C_TE (1<<4)
-# define AC97C_TF (1<<3)
-# define AC97C_RR (1<<2)
-# define AC97C_RE (1<<1)
-# define AC97C_RF (1<<0)
-#define AC97C_DATA 0xB0000008
-#define AC97C_CMD 0xB000000C
-# define AC97C_WD_BIT 16
-# define AC97C_READ (1<<7)
-# define AC97C_INDEX_MASK 0x7f
-#define AC97C_CNTRL 0xB0000010
-# define AC97C_RS (1<<1)
-# define AC97C_CE (1<<0)
-
+# define AC97C_SG (1 << 2)
+# define AC97C_SYNC (1 << 1)
+# define AC97C_RESET (1 << 0)
+#define AC97C_STATUS 0xB0000004
+# define AC97C_XU (1 << 11)
+# define AC97C_XO (1 << 10)
+# define AC97C_RU (1 << 9)
+# define AC97C_RO (1 << 8)
+# define AC97C_READY (1 << 7)
+# define AC97C_CP (1 << 6)
+# define AC97C_TR (1 << 5)
+# define AC97C_TE (1 << 4)
+# define AC97C_TF (1 << 3)
+# define AC97C_RR (1 << 2)
+# define AC97C_RE (1 << 1)
+# define AC97C_RF (1 << 0)
+#define AC97C_DATA 0xB0000008
+#define AC97C_CMD 0xB000000C
+# define AC97C_WD_BIT 16
+# define AC97C_READ (1 << 7)
+# define AC97C_INDEX_MASK 0x7f
+#define AC97C_CNTRL 0xB0000010
+# define AC97C_RS (1 << 1)
+# define AC97C_CE (1 << 0)
/* Secure Digital (SD) Controller */
#define SD0_XMIT_FIFO 0xB0600000
@@ -1638,73 +1633,74 @@
#if defined(CONFIG_SOC_AU1500) || defined(CONFIG_SOC_AU1550)
/* Au1500 PCI Controller */
-#define Au1500_CFG_BASE 0xB4005000 // virtual, kseg0 addr
-#define Au1500_PCI_CMEM (Au1500_CFG_BASE + 0)
-#define Au1500_PCI_CFG (Au1500_CFG_BASE + 4)
-# define PCI_ERROR ((1<<22) | (1<<23) | (1<<24) | (1<<25) | (1<<26) | (1<<27))
-#define Au1500_PCI_B2BMASK_CCH (Au1500_CFG_BASE + 8)
-#define Au1500_PCI_B2B0_VID (Au1500_CFG_BASE + 0xC)
-#define Au1500_PCI_B2B1_ID (Au1500_CFG_BASE + 0x10)
-#define Au1500_PCI_MWMASK_DEV (Au1500_CFG_BASE + 0x14)
+#define Au1500_CFG_BASE 0xB4005000 /* virtual, KSEG1 addr */
+#define Au1500_PCI_CMEM (Au1500_CFG_BASE + 0)
+#define Au1500_PCI_CFG (Au1500_CFG_BASE + 4)
+# define PCI_ERROR ((1 << 22) | (1 << 23) | (1 << 24) | \
+ (1 << 25) | (1 << 26) | (1 << 27))
+#define Au1500_PCI_B2BMASK_CCH (Au1500_CFG_BASE + 8)
+#define Au1500_PCI_B2B0_VID (Au1500_CFG_BASE + 0xC)
+#define Au1500_PCI_B2B1_ID (Au1500_CFG_BASE + 0x10)
+#define Au1500_PCI_MWMASK_DEV (Au1500_CFG_BASE + 0x14)
#define Au1500_PCI_MWBASE_REV_CCL (Au1500_CFG_BASE + 0x18)
-#define Au1500_PCI_ERR_ADDR (Au1500_CFG_BASE + 0x1C)
-#define Au1500_PCI_SPEC_INTACK (Au1500_CFG_BASE + 0x20)
-#define Au1500_PCI_ID (Au1500_CFG_BASE + 0x100)
-#define Au1500_PCI_STATCMD (Au1500_CFG_BASE + 0x104)
-#define Au1500_PCI_CLASSREV (Au1500_CFG_BASE + 0x108)
-#define Au1500_PCI_HDRTYPE (Au1500_CFG_BASE + 0x10C)
-#define Au1500_PCI_MBAR (Au1500_CFG_BASE + 0x110)
+#define Au1500_PCI_ERR_ADDR (Au1500_CFG_BASE + 0x1C)
+#define Au1500_PCI_SPEC_INTACK (Au1500_CFG_BASE + 0x20)
+#define Au1500_PCI_ID (Au1500_CFG_BASE + 0x100)
+#define Au1500_PCI_STATCMD (Au1500_CFG_BASE + 0x104)
+#define Au1500_PCI_CLASSREV (Au1500_CFG_BASE + 0x108)
+#define Au1500_PCI_HDRTYPE (Au1500_CFG_BASE + 0x10C)
+#define Au1500_PCI_MBAR (Au1500_CFG_BASE + 0x110)
-#define Au1500_PCI_HDR 0xB4005100 // virtual, kseg0 addr
+#define Au1500_PCI_HDR 0xB4005100 /* virtual, KSEG1 addr */
-/* All of our structures, like pci resource, have 32 bit members.
+/*
+ * All of our structures, like PCI resource, have 32-bit members.
* Drivers are expected to do an ioremap on the PCI MEM resource, but it's
- * hard to store 0x4 0000 0000 in a 32 bit type. We require a small patch
+ * hard to store 0x4 0000 0000 in a 32-bit type. We require a small patch
* to __ioremap to check for addresses between (u32)Au1500_PCI_MEM_START and
- * (u32)Au1500_PCI_MEM_END and change those to the full 36 bit PCI MEM
- * addresses. For PCI IO, it's simpler because we get to do the ioremap
+ * (u32)Au1500_PCI_MEM_END and change those to the full 36-bit PCI MEM
+ * addresses. For PCI I/O, it's simpler because we get to do the ioremap
* ourselves and then adjust the device's resources.
*/
-#define Au1500_EXT_CFG 0x600000000ULL
-#define Au1500_EXT_CFG_TYPE1 0x680000000ULL
-#define Au1500_PCI_IO_START 0x500000000ULL
-#define Au1500_PCI_IO_END 0x5000FFFFFULL
-#define Au1500_PCI_MEM_START 0x440000000ULL
-#define Au1500_PCI_MEM_END 0x44FFFFFFFULL
+#define Au1500_EXT_CFG 0x600000000ULL
+#define Au1500_EXT_CFG_TYPE1 0x680000000ULL
+#define Au1500_PCI_IO_START 0x500000000ULL
+#define Au1500_PCI_IO_END 0x5000FFFFFULL
+#define Au1500_PCI_MEM_START 0x440000000ULL
+#define Au1500_PCI_MEM_END 0x44FFFFFFFULL
#define PCI_IO_START 0x00001000
#define PCI_IO_END 0x000FFFFF
#define PCI_MEM_START 0x40000000
#define PCI_MEM_END 0x4FFFFFFF
-#define PCI_FIRST_DEVFN (0<<3)
-#define PCI_LAST_DEVFN (19<<3)
+#define PCI_FIRST_DEVFN (0 << 3)
+#define PCI_LAST_DEVFN (19 << 3)
-#define IOPORT_RESOURCE_START 0x00001000 /* skip legacy probing */
-#define IOPORT_RESOURCE_END 0xffffffff
-#define IOMEM_RESOURCE_START 0x10000000
-#define IOMEM_RESOURCE_END 0xffffffff
+#define IOPORT_RESOURCE_START 0x00001000 /* skip legacy probing */
+#define IOPORT_RESOURCE_END 0xffffffff
+#define IOMEM_RESOURCE_START 0x10000000
+#define IOMEM_RESOURCE_END 0xffffffff
#else /* Au1000 and Au1100 and Au1200 */
-/* don't allow any legacy ports probing */
-#define IOPORT_RESOURCE_START 0x10000000
-#define IOPORT_RESOURCE_END 0xffffffff
-#define IOMEM_RESOURCE_START 0x10000000
-#define IOMEM_RESOURCE_END 0xffffffff
+/* Don't allow any legacy ports probing */
+#define IOPORT_RESOURCE_START 0x10000000
+#define IOPORT_RESOURCE_END 0xffffffff
+#define IOMEM_RESOURCE_START 0x10000000
+#define IOMEM_RESOURCE_END 0xffffffff
-#define PCI_IO_START 0
-#define PCI_IO_END 0
-#define PCI_MEM_START 0
-#define PCI_MEM_END 0
+#define PCI_IO_START 0
+#define PCI_IO_END 0
+#define PCI_MEM_START 0
+#define PCI_MEM_END 0
#define PCI_FIRST_DEVFN 0
-#define PCI_LAST_DEVFN 0
+#define PCI_LAST_DEVFN 0
#endif
#ifndef _LANGUAGE_ASSEMBLY
-typedef volatile struct
-{
+typedef volatile struct {
/* 0x0000 */ u32 toytrim;
/* 0x0004 */ u32 toywrite;
/* 0x0008 */ u32 toymatch0;
@@ -1746,13 +1742,14 @@
/* 0x010C */ u32 outputclr;
/* 0x0110 */ u32 pinstaterd;
#define pininputen pinstaterd
-
} AU1X00_SYS;
-static AU1X00_SYS* const sys = (AU1X00_SYS *)SYS_BASE;
+static AU1X00_SYS * const sys = (AU1X00_SYS *)SYS_BASE;
#endif
-/* Processor information base on prid.
+
+/*
+ * Processor information based on PRID.
* Copied from PowerPC.
*/
#ifndef _LANGUAGE_ASSEMBLY
@@ -1767,9 +1764,8 @@
unsigned char cpu_pll_wo; /* sys_cpupll reg. write-only */
};
-extern struct cpu_spec cpu_specs[];
-extern struct cpu_spec *cur_cpu_spec[];
+extern struct cpu_spec cpu_specs[];
+extern struct cpu_spec *cur_cpu_spec[];
#endif
#endif
-
diff --git a/include/asm-mips/mach-au1x00/au1000_dma.h b/include/asm-mips/mach-au1x00/au1000_dma.h
index 9f29520..c333b4e 100644
--- a/include/asm-mips/mach-au1x00/au1000_dma.h
+++ b/include/asm-mips/mach-au1x00/au1000_dma.h
@@ -1,11 +1,10 @@
/*
* BRIEF MODULE DESCRIPTION
- * Defines for using and allocating dma channels on the Alchemy
- * Au1000 mips processor.
+ * Defines for using and allocating DMA channels on the Alchemy
+ * Au1x00 MIPS processors.
*
- * Copyright 2000 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * stevel@mvista.com or source@mvista.com
+ * Copyright 2000, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -31,7 +30,7 @@
#ifndef __ASM_AU1000_DMA_H
#define __ASM_AU1000_DMA_H
-#include <asm/io.h> /* need byte IO */
+#include <linux/io.h> /* need byte IO */
#include <linux/spinlock.h> /* And spinlocks */
#include <linux/delay.h>
#include <asm/system.h>
@@ -50,36 +49,36 @@
#define DMA_DAH_MASK (0x0f << 20)
#define DMA_DID_BIT 16
#define DMA_DID_MASK (0x0f << DMA_DID_BIT)
-#define DMA_DS (1<<15)
-#define DMA_BE (1<<13)
-#define DMA_DR (1<<12)
-#define DMA_TS8 (1<<11)
+#define DMA_DS (1 << 15)
+#define DMA_BE (1 << 13)
+#define DMA_DR (1 << 12)
+#define DMA_TS8 (1 << 11)
#define DMA_DW_BIT 9
#define DMA_DW_MASK (0x03 << DMA_DW_BIT)
#define DMA_DW8 (0 << DMA_DW_BIT)
#define DMA_DW16 (1 << DMA_DW_BIT)
#define DMA_DW32 (2 << DMA_DW_BIT)
-#define DMA_NC (1<<8)
-#define DMA_IE (1<<7)
-#define DMA_HALT (1<<6)
-#define DMA_GO (1<<5)
-#define DMA_AB (1<<4)
-#define DMA_D1 (1<<3)
-#define DMA_BE1 (1<<2)
-#define DMA_D0 (1<<1)
-#define DMA_BE0 (1<<0)
+#define DMA_NC (1 << 8)
+#define DMA_IE (1 << 7)
+#define DMA_HALT (1 << 6)
+#define DMA_GO (1 << 5)
+#define DMA_AB (1 << 4)
+#define DMA_D1 (1 << 3)
+#define DMA_BE1 (1 << 2)
+#define DMA_D0 (1 << 1)
+#define DMA_BE0 (1 << 0)
-#define DMA_PERIPHERAL_ADDR 0x00000008
-#define DMA_BUFFER0_START 0x0000000C
-#define DMA_BUFFER1_START 0x00000014
-#define DMA_BUFFER0_COUNT 0x00000010
-#define DMA_BUFFER1_COUNT 0x00000018
-#define DMA_BAH_BIT 16
-#define DMA_BAH_MASK (0x0f << DMA_BAH_BIT)
-#define DMA_COUNT_BIT 0
-#define DMA_COUNT_MASK (0xffff << DMA_COUNT_BIT)
+#define DMA_PERIPHERAL_ADDR 0x00000008
+#define DMA_BUFFER0_START 0x0000000C
+#define DMA_BUFFER1_START 0x00000014
+#define DMA_BUFFER0_COUNT 0x00000010
+#define DMA_BUFFER1_COUNT 0x00000018
+#define DMA_BAH_BIT 16
+#define DMA_BAH_MASK (0x0f << DMA_BAH_BIT)
+#define DMA_COUNT_BIT 0
+#define DMA_COUNT_MASK (0xffff << DMA_COUNT_BIT)
-/* DMA Device ID's follow */
+/* DMA Device IDs follow */
enum {
DMA_ID_UART0_TX = 0,
DMA_ID_UART0_RX,
@@ -110,7 +109,8 @@
};
struct dma_chan {
- int dev_id; // this channel is allocated if >=0, free otherwise
+ int dev_id; /* this channel is allocated if >= 0, */
+ /* free otherwise */
unsigned int io;
const char *dev_str;
int irq;
@@ -132,23 +132,23 @@
extern void dump_au1000_dma_channel(unsigned int dmanr);
extern spinlock_t au1000_dma_spin_lock;
-
-static __inline__ struct dma_chan *get_dma_chan(unsigned int dmanr)
+static inline struct dma_chan *get_dma_chan(unsigned int dmanr)
{
- if (dmanr >= NUM_AU1000_DMA_CHANNELS
- || au1000_dma_table[dmanr].dev_id < 0)
+ if (dmanr >= NUM_AU1000_DMA_CHANNELS ||
+ au1000_dma_table[dmanr].dev_id < 0)
return NULL;
return &au1000_dma_table[dmanr];
}
-static __inline__ unsigned long claim_dma_lock(void)
+static inline unsigned long claim_dma_lock(void)
{
unsigned long flags;
+
spin_lock_irqsave(&au1000_dma_spin_lock, flags);
return flags;
}
-static __inline__ void release_dma_lock(unsigned long flags)
+static inline void release_dma_lock(unsigned long flags)
{
spin_unlock_irqrestore(&au1000_dma_spin_lock, flags);
}
@@ -156,48 +156,53 @@
/*
* Set the DMA buffer enable bits in the mode register.
*/
-static __inline__ void enable_dma_buffer0(unsigned int dmanr)
+static inline void enable_dma_buffer0(unsigned int dmanr)
{
struct dma_chan *chan = get_dma_chan(dmanr);
+
if (!chan)
return;
au_writel(DMA_BE0, chan->io + DMA_MODE_SET);
}
-static __inline__ void enable_dma_buffer1(unsigned int dmanr)
+
+static inline void enable_dma_buffer1(unsigned int dmanr)
{
struct dma_chan *chan = get_dma_chan(dmanr);
+
if (!chan)
return;
au_writel(DMA_BE1, chan->io + DMA_MODE_SET);
}
-static __inline__ void enable_dma_buffers(unsigned int dmanr)
+static inline void enable_dma_buffers(unsigned int dmanr)
{
struct dma_chan *chan = get_dma_chan(dmanr);
+
if (!chan)
return;
au_writel(DMA_BE0 | DMA_BE1, chan->io + DMA_MODE_SET);
}
-static __inline__ void start_dma(unsigned int dmanr)
+static inline void start_dma(unsigned int dmanr)
{
struct dma_chan *chan = get_dma_chan(dmanr);
+
if (!chan)
return;
-
au_writel(DMA_GO, chan->io + DMA_MODE_SET);
}
#define DMA_HALT_POLL 0x5000
-static __inline__ void halt_dma(unsigned int dmanr)
+static inline void halt_dma(unsigned int dmanr)
{
struct dma_chan *chan = get_dma_chan(dmanr);
int i;
+
if (!chan)
return;
-
au_writel(DMA_GO, chan->io + DMA_MODE_CLEAR);
- // poll the halt bit
+
+ /* Poll the halt bit */
for (i = 0; i < DMA_HALT_POLL; i++)
if (au_readl(chan->io + DMA_MODE_READ) & DMA_HALT)
break;
@@ -205,55 +210,57 @@
printk(KERN_INFO "halt_dma: HALT poll expired!\n");
}
-
-static __inline__ void disable_dma(unsigned int dmanr)
+static inline void disable_dma(unsigned int dmanr)
{
struct dma_chan *chan = get_dma_chan(dmanr);
+
if (!chan)
return;
halt_dma(dmanr);
- // now we can disable the buffers
+ /* Now we can disable the buffers */
au_writel(~DMA_GO, chan->io + DMA_MODE_CLEAR);
}
-static __inline__ int dma_halted(unsigned int dmanr)
+static inline int dma_halted(unsigned int dmanr)
{
struct dma_chan *chan = get_dma_chan(dmanr);
+
if (!chan)
return 1;
return (au_readl(chan->io + DMA_MODE_READ) & DMA_HALT) ? 1 : 0;
}
-/* initialize a DMA channel */
-static __inline__ void init_dma(unsigned int dmanr)
+/* Initialize a DMA channel. */
+static inline void init_dma(unsigned int dmanr)
{
struct dma_chan *chan = get_dma_chan(dmanr);
u32 mode;
+
if (!chan)
return;
disable_dma(dmanr);
- // set device FIFO address
- au_writel(CPHYSADDR(chan->fifo_addr),
- chan->io + DMA_PERIPHERAL_ADDR);
+ /* Set device FIFO address */
+ au_writel(CPHYSADDR(chan->fifo_addr), chan->io + DMA_PERIPHERAL_ADDR);
mode = chan->mode | (chan->dev_id << DMA_DID_BIT);
if (chan->irq)
mode |= DMA_IE;
au_writel(~mode, chan->io + DMA_MODE_CLEAR);
- au_writel(mode, chan->io + DMA_MODE_SET);
+ au_writel(mode, chan->io + DMA_MODE_SET);
}
/*
- * set mode for a specific DMA channel
+ * Set mode for a specific DMA channel
*/
-static __inline__ void set_dma_mode(unsigned int dmanr, unsigned int mode)
+static inline void set_dma_mode(unsigned int dmanr, unsigned int mode)
{
struct dma_chan *chan = get_dma_chan(dmanr);
+
if (!chan)
return;
/*
@@ -266,36 +273,37 @@
chan->mode |= mode;
}
-static __inline__ unsigned int get_dma_mode(unsigned int dmanr)
+static inline unsigned int get_dma_mode(unsigned int dmanr)
{
struct dma_chan *chan = get_dma_chan(dmanr);
+
if (!chan)
return 0;
return chan->mode;
}
-static __inline__ int get_dma_active_buffer(unsigned int dmanr)
+static inline int get_dma_active_buffer(unsigned int dmanr)
{
struct dma_chan *chan = get_dma_chan(dmanr);
+
if (!chan)
return -1;
return (au_readl(chan->io + DMA_MODE_READ) & DMA_AB) ? 1 : 0;
}
-
/*
- * set the device FIFO address for a specific DMA channel - only
+ * Set the device FIFO address for a specific DMA channel - only
* applicable to GPO4 and GPO5. All the other devices have fixed
* FIFO addresses.
*/
-static __inline__ void set_dma_fifo_addr(unsigned int dmanr,
- unsigned int a)
+static inline void set_dma_fifo_addr(unsigned int dmanr, unsigned int a)
{
struct dma_chan *chan = get_dma_chan(dmanr);
+
if (!chan)
return;
- if (chan->mode & DMA_DS) /* second bank of device ids */
+ if (chan->mode & DMA_DS) /* second bank of device IDs */
return;
if (chan->dev_id != DMA_ID_GP04 && chan->dev_id != DMA_ID_GP05)
@@ -307,16 +315,19 @@
/*
* Clear the DMA buffer done bits in the mode register.
*/
-static __inline__ void clear_dma_done0(unsigned int dmanr)
+static inline void clear_dma_done0(unsigned int dmanr)
{
struct dma_chan *chan = get_dma_chan(dmanr);
+
if (!chan)
return;
au_writel(DMA_D0, chan->io + DMA_MODE_CLEAR);
}
-static __inline__ void clear_dma_done1(unsigned int dmanr)
+
+static inline void clear_dma_done1(unsigned int dmanr)
{
struct dma_chan *chan = get_dma_chan(dmanr);
+
if (!chan)
return;
au_writel(DMA_D1, chan->io + DMA_MODE_CLEAR);
@@ -325,16 +336,17 @@
/*
* This does nothing - not applicable to Au1000 DMA.
*/
-static __inline__ void set_dma_page(unsigned int dmanr, char pagenr)
+static inline void set_dma_page(unsigned int dmanr, char pagenr)
{
}
/*
* Set Buffer 0 transfer address for specific DMA channel.
*/
-static __inline__ void set_dma_addr0(unsigned int dmanr, unsigned int a)
+static inline void set_dma_addr0(unsigned int dmanr, unsigned int a)
{
struct dma_chan *chan = get_dma_chan(dmanr);
+
if (!chan)
return;
au_writel(a, chan->io + DMA_BUFFER0_START);
@@ -343,9 +355,10 @@
/*
* Set Buffer 1 transfer address for specific DMA channel.
*/
-static __inline__ void set_dma_addr1(unsigned int dmanr, unsigned int a)
+static inline void set_dma_addr1(unsigned int dmanr, unsigned int a)
{
struct dma_chan *chan = get_dma_chan(dmanr);
+
if (!chan)
return;
au_writel(a, chan->io + DMA_BUFFER1_START);
@@ -355,10 +368,10 @@
/*
* Set Buffer 0 transfer size (max 64k) for a specific DMA channel.
*/
-static __inline__ void set_dma_count0(unsigned int dmanr,
- unsigned int count)
+static inline void set_dma_count0(unsigned int dmanr, unsigned int count)
{
struct dma_chan *chan = get_dma_chan(dmanr);
+
if (!chan)
return;
count &= DMA_COUNT_MASK;
@@ -368,10 +381,10 @@
/*
* Set Buffer 1 transfer size (max 64k) for a specific DMA channel.
*/
-static __inline__ void set_dma_count1(unsigned int dmanr,
- unsigned int count)
+static inline void set_dma_count1(unsigned int dmanr, unsigned int count)
{
struct dma_chan *chan = get_dma_chan(dmanr);
+
if (!chan)
return;
count &= DMA_COUNT_MASK;
@@ -381,10 +394,10 @@
/*
* Set both buffer transfer sizes (max 64k) for a specific DMA channel.
*/
-static __inline__ void set_dma_count(unsigned int dmanr,
- unsigned int count)
+static inline void set_dma_count(unsigned int dmanr, unsigned int count)
{
struct dma_chan *chan = get_dma_chan(dmanr);
+
if (!chan)
return;
count &= DMA_COUNT_MASK;
@@ -396,35 +409,36 @@
* Returns which buffer has its done bit set in the mode register.
* Returns -1 if neither or both done bits set.
*/
-static __inline__ unsigned int get_dma_buffer_done(unsigned int dmanr)
+static inline unsigned int get_dma_buffer_done(unsigned int dmanr)
{
struct dma_chan *chan = get_dma_chan(dmanr);
+
if (!chan)
return 0;
-
- return au_readl(chan->io + DMA_MODE_READ) & (DMA_D0 | DMA_D1);
+ return au_readl(chan->io + DMA_MODE_READ) & (DMA_D0 | DMA_D1);
}
/*
* Returns the DMA channel's Buffer Done IRQ number.
*/
-static __inline__ int get_dma_done_irq(unsigned int dmanr)
+static inline int get_dma_done_irq(unsigned int dmanr)
{
struct dma_chan *chan = get_dma_chan(dmanr);
+
if (!chan)
return -1;
-
return chan->irq;
}
/*
* Get DMA residue count. Returns the number of _bytes_ left to transfer.
*/
-static __inline__ int get_dma_residue(unsigned int dmanr)
+static inline int get_dma_residue(unsigned int dmanr)
{
int curBufCntReg, count;
struct dma_chan *chan = get_dma_chan(dmanr);
+
if (!chan)
return 0;
@@ -442,4 +456,3 @@
}
#endif /* __ASM_AU1000_DMA_H */
-
diff --git a/include/asm-mips/mach-au1x00/au1000_gpio.h b/include/asm-mips/mach-au1x00/au1000_gpio.h
index 298f920..d8c96fd 100644
--- a/include/asm-mips/mach-au1x00/au1000_gpio.h
+++ b/include/asm-mips/mach-au1x00/au1000_gpio.h
@@ -2,12 +2,12 @@
* FILE NAME au1000_gpio.h
*
* BRIEF MODULE DESCRIPTION
- * API to Alchemy Au1000 GPIO device.
+ * API to Alchemy Au1xx0 GPIO device.
*
* Author: MontaVista Software, Inc. <source@mvista.com>
- * Steve Longerbeam <stevel@mvista.com>
+ * Steve Longerbeam
*
- * Copyright 2001 MontaVista Software Inc.
+ * Copyright 2001, 2008 MontaVista Software Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
@@ -37,12 +37,12 @@
#define AU1000GPIO_IOC_MAGIC 'A'
-#define AU1000GPIO_IN _IOR (AU1000GPIO_IOC_MAGIC, 0, int)
-#define AU1000GPIO_SET _IOW (AU1000GPIO_IOC_MAGIC, 1, int)
-#define AU1000GPIO_CLEAR _IOW (AU1000GPIO_IOC_MAGIC, 2, int)
-#define AU1000GPIO_OUT _IOW (AU1000GPIO_IOC_MAGIC, 3, int)
-#define AU1000GPIO_TRISTATE _IOW (AU1000GPIO_IOC_MAGIC, 4, int)
-#define AU1000GPIO_AVAIL_MASK _IOR (AU1000GPIO_IOC_MAGIC, 5, int)
+#define AU1000GPIO_IN _IOR(AU1000GPIO_IOC_MAGIC, 0, int)
+#define AU1000GPIO_SET _IOW(AU1000GPIO_IOC_MAGIC, 1, int)
+#define AU1000GPIO_CLEAR _IOW(AU1000GPIO_IOC_MAGIC, 2, int)
+#define AU1000GPIO_OUT _IOW(AU1000GPIO_IOC_MAGIC, 3, int)
+#define AU1000GPIO_TRISTATE _IOW(AU1000GPIO_IOC_MAGIC, 4, int)
+#define AU1000GPIO_AVAIL_MASK _IOR(AU1000GPIO_IOC_MAGIC, 5, int)
#ifdef __KERNEL__
extern u32 get_au1000_avail_gpio_mask(void);
diff --git a/include/asm-mips/mach-au1x00/au1550_spi.h b/include/asm-mips/mach-au1x00/au1550_spi.h
index c2f0466..40e6c48 100644
--- a/include/asm-mips/mach-au1x00/au1550_spi.h
+++ b/include/asm-mips/mach-au1x00/au1550_spi.h
@@ -1,5 +1,5 @@
/*
- * au1550_spi.h - au1550 psc spi controller driver - platform data struct
+ * au1550_spi.h - Au1550 PSC SPI controller driver - platform data structure
*/
#ifndef _AU1550_SPI_H_
diff --git a/include/asm-mips/mach-au1x00/au1xxx.h b/include/asm-mips/mach-au1x00/au1xxx.h
index 9471359..1b36550 100644
--- a/include/asm-mips/mach-au1x00/au1xxx.h
+++ b/include/asm-mips/mach-au1x00/au1xxx.h
@@ -23,10 +23,10 @@
#ifndef _AU1XXX_H_
#define _AU1XXX_H_
-
#include <asm/mach-au1x00/au1000.h>
-#if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) || defined(CONFIG_MIPS_DB1500) || defined(CONFIG_MIPS_DB1550)
+#if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) || \
+ defined(CONFIG_MIPS_DB1500) || defined(CONFIG_MIPS_DB1550)
#include <asm/mach-db1x00/db1x00.h>
#elif defined(CONFIG_MIPS_PB1550)
diff --git a/include/asm-mips/mach-au1x00/au1xxx_dbdma.h b/include/asm-mips/mach-au1x00/au1xxx_dbdma.h
index 93d507c..44a67bf 100644
--- a/include/asm-mips/mach-au1x00/au1xxx_dbdma.h
+++ b/include/asm-mips/mach-au1x00/au1xxx_dbdma.h
@@ -28,17 +28,18 @@
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-/* Specifics for the Au1xxx Descriptor-Based DMA Controllers, first
- * seen in the AU1550 part.
+/*
+ * Specifics for the Au1xxx Descriptor-Based DMA Controller,
+ * first seen in the AU1550 part.
*/
#ifndef _AU1000_DBDMA_H_
#define _AU1000_DBDMA_H_
-
#ifndef _LANGUAGE_ASSEMBLY
-/* The DMA base addresses.
- * The Channels are every 256 bytes (0x0100) from the channel 0 base.
+/*
+ * The DMA base addresses.
+ * The channels are every 256 bytes (0x0100) from the channel 0 base.
* Interrupt status/enable is bits 15:0 for channels 15 to zero.
*/
#define DDMA_GLOBAL_BASE 0xb4003000
@@ -51,16 +52,14 @@
u32 ddma_inten;
} dbdma_global_t;
-/* General Configuration.
-*/
+/* General Configuration. */
#define DDMA_CONFIG_AF (1 << 2)
#define DDMA_CONFIG_AH (1 << 1)
#define DDMA_CONFIG_AL (1 << 0)
#define DDMA_THROTTLE_EN (1 << 31)
-/* The structure of a DMA Channel.
-*/
+/* The structure of a DMA Channel. */
typedef volatile struct au1xxx_dma_channel {
u32 ddma_cfg; /* See below */
u32 ddma_desptr; /* 32-byte aligned pointer to descriptor */
@@ -69,8 +68,7 @@
u32 ddma_irq; /* If bit 0 set, interrupt pending */
u32 ddma_stat; /* See below */
u32 ddma_bytecnt; /* Byte count, valid only when chan idle */
- /* Remainder, up to the 256 byte boundary, is reserved.
- */
+ /* Remainder, up to the 256 byte boundary, is reserved. */
} au1x_dma_chan_t;
#define DDMA_CFG_SED (1 << 9) /* source DMA level/edge detect */
@@ -84,7 +82,8 @@
#define DDMA_CFG_DBE (1 << 1) /* Destination big endian */
#define DDMA_CFG_EN (1 << 0) /* Channel enable */
-/* Always set when descriptor processing done, regardless of
+/*
+ * Always set when descriptor processing done, regardless of
* interrupt enable state. Reflected in global intstat, don't
* clear this until global intstat is read/used.
*/
@@ -94,7 +93,8 @@
#define DDMA_STAT_V (1 << 1) /* Descriptor valid */
#define DDMA_STAT_H (1 << 0) /* Channel Halted */
-/* "Standard" DDMA Descriptor.
+/*
+ * "Standard" DDMA Descriptor.
* Must be 32-byte aligned.
*/
typedef volatile struct au1xxx_ddma_desc {
@@ -106,8 +106,9 @@
u32 dscr_dest1; /* See below */
u32 dscr_stat; /* completion status */
u32 dscr_nxtptr; /* Next descriptor pointer (mostly) */
- /* First 32bytes are HW specific!!!
- Lets have some SW data following.. make sure its 32bytes
+ /*
+ * First 32 bytes are HW specific!!!
+ * Lets have some SW data following -- make sure it's 32 bytes.
*/
u32 sw_status;
u32 sw_context;
@@ -130,10 +131,9 @@
#define DSCR_CMD0_CV (0x1 << 2) /* Clear Valid when done */
#define DSCR_CMD0_ST_MASK (0x3 << 0) /* Status instruction */
-#define SW_STATUS_INUSE (1<<0)
+#define SW_STATUS_INUSE (1 << 0)
-/* Command 0 device IDs.
-*/
+/* Command 0 device IDs. */
#ifdef CONFIG_SOC_AU1550
#define DSCR_CMD0_UART0_TX 0
#define DSCR_CMD0_UART0_RX 1
@@ -198,16 +198,15 @@
#define DSCR_CMD0_THROTTLE 30
#define DSCR_CMD0_ALWAYS 31
#define DSCR_NDEV_IDS 32
-/* THis macro is used to find/create custom device types */
-#define DSCR_DEV2CUSTOM_ID(x, d) (((((x)&0xFFFF)<<8)|0x32000000)|((d)&0xFF))
-#define DSCR_CUSTOM2DEV_ID(x) ((x)&0xFF)
-
+/* This macro is used to find/create custom device types */
+#define DSCR_DEV2CUSTOM_ID(x, d) (((((x) & 0xFFFF) << 8) | 0x32000000) | \
+ ((d) & 0xFF))
+#define DSCR_CUSTOM2DEV_ID(x) ((x) & 0xFF)
#define DSCR_CMD0_SID(x) (((x) & 0x1f) << 25)
#define DSCR_CMD0_DID(x) (((x) & 0x1f) << 20)
-/* Source/Destination transfer width.
-*/
+/* Source/Destination transfer width. */
#define DSCR_CMD0_BYTE 0
#define DSCR_CMD0_HALFWORD 1
#define DSCR_CMD0_WORD 2
@@ -215,16 +214,14 @@
#define DSCR_CMD0_SW(x) (((x) & 0x3) << 18)
#define DSCR_CMD0_DW(x) (((x) & 0x3) << 16)
-/* DDMA Descriptor Type.
-*/
+/* DDMA Descriptor Type. */
#define DSCR_CMD0_STANDARD 0
#define DSCR_CMD0_LITERAL 1
#define DSCR_CMD0_CMP_BRANCH 2
#define DSCR_CMD0_DT(x) (((x) & 0x3) << 13)
-/* Status Instruction.
-*/
+/* Status Instruction. */
#define DSCR_CMD0_ST_NOCHANGE 0 /* Don't change */
#define DSCR_CMD0_ST_CURRENT 1 /* Write current status */
#define DSCR_CMD0_ST_CMD0 2 /* Write cmd0 with V cleared */
@@ -232,23 +229,20 @@
#define DSCR_CMD0_ST(x) (((x) & 0x3) << 0)
-/* Descriptor Command 1
-*/
+/* Descriptor Command 1. */
#define DSCR_CMD1_SUPTR_MASK (0xf << 28) /* upper 4 bits of src addr */
#define DSCR_CMD1_DUPTR_MASK (0xf << 24) /* upper 4 bits of dest addr */
#define DSCR_CMD1_FL_MASK (0x3 << 22) /* Flag bits */
#define DSCR_CMD1_BC_MASK (0x3fffff) /* Byte count */
-/* Flag description.
-*/
+/* Flag description. */
#define DSCR_CMD1_FL_MEM_STRIDE0 0
#define DSCR_CMD1_FL_MEM_STRIDE1 1
#define DSCR_CMD1_FL_MEM_STRIDE2 2
#define DSCR_CMD1_FL(x) (((x) & 0x3) << 22)
-/* Source1, 1-dimensional stride.
-*/
+/* Source1, 1-dimensional stride. */
#define DSCR_SRC1_STS_MASK (3 << 30) /* Src xfer size */
#define DSCR_SRC1_SAM_MASK (3 << 28) /* Src xfer movement */
#define DSCR_SRC1_SB_MASK (0x3fff << 14) /* Block size */
@@ -256,8 +250,7 @@
#define DSCR_SRC1_SS_MASK (0x3fff << 0) /* Stride */
#define DSCR_SRC1_SS(x) (((x) & 0x3fff) << 0)
-/* Dest1, 1-dimensional stride.
-*/
+/* Dest1, 1-dimensional stride. */
#define DSCR_DEST1_DTS_MASK (3 << 30) /* Dest xfer size */
#define DSCR_DEST1_DAM_MASK (3 << 28) /* Dest xfer movement */
#define DSCR_DEST1_DB_MASK (0x3fff << 14) /* Block size */
@@ -279,29 +272,27 @@
#define DSCR_SRC1_SAM(x) (((x) & 3) << 28)
#define DSCR_DEST1_DAM(x) (((x) & 3) << 28)
-/* The next descriptor pointer.
-*/
+/* The next descriptor pointer. */
#define DSCR_NXTPTR_MASK (0x07ffffff)
#define DSCR_NXTPTR(x) ((x) >> 5)
#define DSCR_GET_NXTPTR(x) ((x) << 5)
#define DSCR_NXTPTR_MS (1 << 27)
-/* The number of DBDMA channels.
-*/
+/* The number of DBDMA channels. */
#define NUM_DBDMA_CHANS 16
/*
- * Ddma API definitions
+ * DDMA API definitions
* FIXME: may not fit to this header file
*/
typedef struct dbdma_device_table {
- u32 dev_id;
- u32 dev_flags;
- u32 dev_tsize;
- u32 dev_devwidth;
- u32 dev_physaddr; /* If FIFO */
- u32 dev_intlevel;
- u32 dev_intpolarity;
+ u32 dev_id;
+ u32 dev_flags;
+ u32 dev_tsize;
+ u32 dev_devwidth;
+ u32 dev_physaddr; /* If FIFO */
+ u32 dev_intlevel;
+ u32 dev_intpolarity;
} dbdev_tab_t;
@@ -316,44 +307,41 @@
au1x_ddma_desc_t *chan_desc_base;
au1x_ddma_desc_t *get_ptr, *put_ptr, *cur_ptr;
void *chan_callparam;
- void (*chan_callback)(int, void *);
+ void (*chan_callback)(int, void *);
} chan_tab_t;
#define DEV_FLAGS_INUSE (1 << 0)
#define DEV_FLAGS_ANYUSE (1 << 1)
#define DEV_FLAGS_OUT (1 << 2)
#define DEV_FLAGS_IN (1 << 3)
-#define DEV_FLAGS_BURSTABLE (1 << 4)
+#define DEV_FLAGS_BURSTABLE (1 << 4)
#define DEV_FLAGS_SYNC (1 << 5)
-/* end Ddma API definitions */
+/* end DDMA API definitions */
-/* External functions for drivers to use.
-*/
-/* Use this to allocate a dbdma channel. The device ids are one of the
- * DSCR_CMD0 devices IDs, which is usually redefined to a more
- * meaningful name. The 'callback' is called during dma completion
+/*
+ * External functions for drivers to use.
+ * Use this to allocate a DBDMA channel. The device IDs are one of
+ * the DSCR_CMD0 devices IDs, which is usually redefined to a more
+ * meaningful name. The 'callback' is called during DMA completion
* interrupt.
*/
extern u32 au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid,
- void (*callback)(int, void *), void *callparam);
+ void (*callback)(int, void *),
+ void *callparam);
#define DBDMA_MEM_CHAN DSCR_CMD0_ALWAYS
-/* Set the device width of a in/out fifo.
-*/
+/* Set the device width of an in/out FIFO. */
u32 au1xxx_dbdma_set_devwidth(u32 chanid, int bits);
-/* Allocate a ring of descriptors for dbdma.
-*/
+/* Allocate a ring of descriptors for DBDMA. */
u32 au1xxx_dbdma_ring_alloc(u32 chanid, int entries);
-/* Put buffers on source/destination descriptors.
-*/
+/* Put buffers on source/destination descriptors. */
u32 _au1xxx_dbdma_put_source(u32 chanid, void *buf, int nbytes, u32 flags);
u32 _au1xxx_dbdma_put_dest(u32 chanid, void *buf, int nbytes, u32 flags);
-/* Get a buffer from the destination descriptor.
-*/
+/* Get a buffer from the destination descriptor. */
u32 au1xxx_dbdma_get_dest(u32 chanid, void **buf, int *nbytes);
void au1xxx_dbdma_stop(u32 chanid);
@@ -364,29 +352,35 @@
void au1xxx_dbdma_chan_free(u32 chanid);
void au1xxx_dbdma_dump(u32 chanid);
-u32 au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr );
+u32 au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr);
-u32 au1xxx_ddma_add_device( dbdev_tab_t *dev );
-void * au1xxx_ddma_get_nextptr_virt(au1x_ddma_desc_t *dp);
+u32 au1xxx_ddma_add_device(dbdev_tab_t *dev);
+extern void au1xxx_ddma_del_device(u32 devid);
+void *au1xxx_ddma_get_nextptr_virt(au1x_ddma_desc_t *dp);
/*
- Some compatibilty macros --
- Needed to make changes to API without breaking existing drivers
-*/
-#define au1xxx_dbdma_put_source(chanid, buf, nbytes)_au1xxx_dbdma_put_source(chanid, buf, nbytes, DDMA_FLAGS_IE)
-#define au1xxx_dbdma_put_source_flags(chanid, buf, nbytes, flags) _au1xxx_dbdma_put_source(chanid, buf, nbytes, flags)
-#define put_source_flags(chanid, buf, nbytes, flags) au1xxx_dbdma_put_source_flags(chanid, buf, nbytes, flags)
+ * Some compatibilty macros -- needed to make changes to API
+ * without breaking existing drivers.
+ */
+#define au1xxx_dbdma_put_source(chanid, buf, nbytes) \
+ _au1xxx_dbdma_put_source(chanid, buf, nbytes, DDMA_FLAGS_IE)
+#define au1xxx_dbdma_put_source_flags(chanid, buf, nbytes, flags) \
+ _au1xxx_dbdma_put_source(chanid, buf, nbytes, flags)
+#define put_source_flags(chanid, buf, nbytes, flags) \
+ au1xxx_dbdma_put_source_flags(chanid, buf, nbytes, flags)
-
-#define au1xxx_dbdma_put_dest(chanid, buf, nbytes) _au1xxx_dbdma_put_dest(chanid, buf, nbytes, DDMA_FLAGS_IE)
-#define au1xxx_dbdma_put_dest_flags(chanid, buf, nbytes, flags) _au1xxx_dbdma_put_dest(chanid, buf, nbytes, flags)
-#define put_dest_flags(chanid, buf, nbytes, flags) au1xxx_dbdma_put_dest_flags(chanid, buf, nbytes, flags)
+#define au1xxx_dbdma_put_dest(chanid, buf, nbytes) \
+ _au1xxx_dbdma_put_dest(chanid, buf, nbytes, DDMA_FLAGS_IE)
+#define au1xxx_dbdma_put_dest_flags(chanid, buf, nbytes, flags) \
+ _au1xxx_dbdma_put_dest(chanid, buf, nbytes, flags)
+#define put_dest_flags(chanid, buf, nbytes, flags) \
+ au1xxx_dbdma_put_dest_flags(chanid, buf, nbytes, flags)
/*
* Flags for the put_source/put_dest functions.
*/
-#define DDMA_FLAGS_IE (1<<0)
-#define DDMA_FLAGS_NOIE (1<<1)
+#define DDMA_FLAGS_IE (1 << 0)
+#define DDMA_FLAGS_NOIE (1 << 1)
#endif /* _LANGUAGE_ASSEMBLY */
#endif /* _AU1000_DBDMA_H_ */
diff --git a/include/asm-mips/mach-au1x00/au1xxx_ide.h b/include/asm-mips/mach-au1x00/au1xxx_ide.h
index b493a5e..60638b8 100644
--- a/include/asm-mips/mach-au1x00/au1xxx_ide.h
+++ b/include/asm-mips/mach-au1x00/au1xxx_ide.h
@@ -31,167 +31,164 @@
*/
#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
- #define DMA_WAIT_TIMEOUT 100
- #define NUM_DESCRIPTORS PRD_ENTRIES
+#define DMA_WAIT_TIMEOUT 100
+#define NUM_DESCRIPTORS PRD_ENTRIES
#else /* CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA */
- #define NUM_DESCRIPTORS 2
+#define NUM_DESCRIPTORS 2
#endif
#ifndef AU1XXX_ATA_RQSIZE
- #define AU1XXX_ATA_RQSIZE 128
+#define AU1XXX_ATA_RQSIZE 128
#endif
/* Disable Burstable-Support for DBDMA */
#ifndef CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON
- #define CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON 0
+#define CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON 0
#endif
#ifdef CONFIG_PM
/*
-* This will enable the device to be powered up when write() or read()
-* is called. If this is not defined, the driver will return -EBUSY.
-*/
+ * This will enable the device to be powered up when write() or read()
+ * is called. If this is not defined, the driver will return -EBUSY.
+ */
#define WAKE_ON_ACCESS 1
-typedef struct
-{
- spinlock_t lock; /* Used to block on state transitions */
- au1xxx_power_dev_t *dev; /* Power Managers device structure */
- unsigned stopped; /* USed to signaling device is stopped */
+typedef struct {
+ spinlock_t lock; /* Used to block on state transitions */
+ au1xxx_power_dev_t *dev; /* Power Managers device structure */
+ unsigned stopped; /* Used to signal device is stopped */
} pm_state;
#endif
-
-typedef struct
-{
- u32 tx_dev_id, rx_dev_id, target_dev_id;
- u32 tx_chan, rx_chan;
- void *tx_desc_head, *rx_desc_head;
- ide_hwif_t *hwif;
+typedef struct {
+ u32 tx_dev_id, rx_dev_id, target_dev_id;
+ u32 tx_chan, rx_chan;
+ void *tx_desc_head, *rx_desc_head;
+ ide_hwif_t *hwif;
#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
- ide_drive_t *drive;
- struct dbdma_cmd *dma_table_cpu;
- dma_addr_t dma_table_dma;
+ ide_drive_t *drive;
+ struct dbdma_cmd *dma_table_cpu;
+ dma_addr_t dma_table_dma;
#endif
int irq;
u32 regbase;
#ifdef CONFIG_PM
- pm_state pm;
+ pm_state pm;
#endif
} _auide_hwif;
-/*******************************************************************************
-* PIO Mode timing calculation : *
-* *
-* Static Bus Spec ATA Spec *
-* Tcsoe = t1 *
-* Toecs = t9 *
-* Twcs = t9 *
-* Tcsh = t2i | t2 *
-* Tcsoff = t2i | t2 *
-* Twp = t2 *
-* Tcsw = t1 *
-* Tpm = 0 *
-* Ta = t1+t2 *
-*******************************************************************************/
+/******************************************************************************/
+/* PIO Mode timing calculation : */
+/* */
+/* Static Bus Spec ATA Spec */
+/* Tcsoe = t1 */
+/* Toecs = t9 */
+/* Twcs = t9 */
+/* Tcsh = t2i | t2 */
+/* Tcsoff = t2i | t2 */
+/* Twp = t2 */
+/* Tcsw = t1 */
+/* Tpm = 0 */
+/* Ta = t1+t2 */
+/******************************************************************************/
-#define TCSOE_MASK (0x07<<29)
-#define TOECS_MASK (0x07<<26)
-#define TWCS_MASK (0x07<<28)
-#define TCSH_MASK (0x0F<<24)
-#define TCSOFF_MASK (0x07<<20)
-#define TWP_MASK (0x3F<<14)
-#define TCSW_MASK (0x0F<<10)
-#define TPM_MASK (0x0F<<6)
-#define TA_MASK (0x3F<<0)
-#define TS_MASK (1<<8)
+#define TCSOE_MASK (0x07 << 29)
+#define TOECS_MASK (0x07 << 26)
+#define TWCS_MASK (0x07 << 28)
+#define TCSH_MASK (0x0F << 24)
+#define TCSOFF_MASK (0x07 << 20)
+#define TWP_MASK (0x3F << 14)
+#define TCSW_MASK (0x0F << 10)
+#define TPM_MASK (0x0F << 6)
+#define TA_MASK (0x3F << 0)
+#define TS_MASK (1 << 8)
/* Timing parameters PIO mode 0 */
-#define SBC_IDE_PIO0_TCSOE (0x04<<29)
-#define SBC_IDE_PIO0_TOECS (0x01<<26)
-#define SBC_IDE_PIO0_TWCS (0x02<<28)
-#define SBC_IDE_PIO0_TCSH (0x08<<24)
-#define SBC_IDE_PIO0_TCSOFF (0x07<<20)
-#define SBC_IDE_PIO0_TWP (0x10<<14)
-#define SBC_IDE_PIO0_TCSW (0x04<<10)
-#define SBC_IDE_PIO0_TPM (0x0<<6)
-#define SBC_IDE_PIO0_TA (0x15<<0)
+#define SBC_IDE_PIO0_TCSOE (0x04 << 29)
+#define SBC_IDE_PIO0_TOECS (0x01 << 26)
+#define SBC_IDE_PIO0_TWCS (0x02 << 28)
+#define SBC_IDE_PIO0_TCSH (0x08 << 24)
+#define SBC_IDE_PIO0_TCSOFF (0x07 << 20)
+#define SBC_IDE_PIO0_TWP (0x10 << 14)
+#define SBC_IDE_PIO0_TCSW (0x04 << 10)
+#define SBC_IDE_PIO0_TPM (0x00 << 6)
+#define SBC_IDE_PIO0_TA (0x15 << 0)
/* Timing parameters PIO mode 1 */
-#define SBC_IDE_PIO1_TCSOE (0x03<<29)
-#define SBC_IDE_PIO1_TOECS (0x01<<26)
-#define SBC_IDE_PIO1_TWCS (0x01<<28)
-#define SBC_IDE_PIO1_TCSH (0x06<<24)
-#define SBC_IDE_PIO1_TCSOFF (0x06<<20)
-#define SBC_IDE_PIO1_TWP (0x08<<14)
-#define SBC_IDE_PIO1_TCSW (0x03<<10)
-#define SBC_IDE_PIO1_TPM (0x00<<6)
-#define SBC_IDE_PIO1_TA (0x0B<<0)
+#define SBC_IDE_PIO1_TCSOE (0x03 << 29)
+#define SBC_IDE_PIO1_TOECS (0x01 << 26)
+#define SBC_IDE_PIO1_TWCS (0x01 << 28)
+#define SBC_IDE_PIO1_TCSH (0x06 << 24)
+#define SBC_IDE_PIO1_TCSOFF (0x06 << 20)
+#define SBC_IDE_PIO1_TWP (0x08 << 14)
+#define SBC_IDE_PIO1_TCSW (0x03 << 10)
+#define SBC_IDE_PIO1_TPM (0x00 << 6)
+#define SBC_IDE_PIO1_TA (0x0B << 0)
/* Timing parameters PIO mode 2 */
-#define SBC_IDE_PIO2_TCSOE (0x05<<29)
-#define SBC_IDE_PIO2_TOECS (0x01<<26)
-#define SBC_IDE_PIO2_TWCS (0x01<<28)
-#define SBC_IDE_PIO2_TCSH (0x07<<24)
-#define SBC_IDE_PIO2_TCSOFF (0x07<<20)
-#define SBC_IDE_PIO2_TWP (0x1F<<14)
-#define SBC_IDE_PIO2_TCSW (0x05<<10)
-#define SBC_IDE_PIO2_TPM (0x00<<6)
-#define SBC_IDE_PIO2_TA (0x22<<0)
+#define SBC_IDE_PIO2_TCSOE (0x05 << 29)
+#define SBC_IDE_PIO2_TOECS (0x01 << 26)
+#define SBC_IDE_PIO2_TWCS (0x01 << 28)
+#define SBC_IDE_PIO2_TCSH (0x07 << 24)
+#define SBC_IDE_PIO2_TCSOFF (0x07 << 20)
+#define SBC_IDE_PIO2_TWP (0x1F << 14)
+#define SBC_IDE_PIO2_TCSW (0x05 << 10)
+#define SBC_IDE_PIO2_TPM (0x00 << 6)
+#define SBC_IDE_PIO2_TA (0x22 << 0)
/* Timing parameters PIO mode 3 */
-#define SBC_IDE_PIO3_TCSOE (0x05<<29)
-#define SBC_IDE_PIO3_TOECS (0x01<<26)
-#define SBC_IDE_PIO3_TWCS (0x01<<28)
-#define SBC_IDE_PIO3_TCSH (0x0D<<24)
-#define SBC_IDE_PIO3_TCSOFF (0x0D<<20)
-#define SBC_IDE_PIO3_TWP (0x15<<14)
-#define SBC_IDE_PIO3_TCSW (0x05<<10)
-#define SBC_IDE_PIO3_TPM (0x00<<6)
-#define SBC_IDE_PIO3_TA (0x1A<<0)
+#define SBC_IDE_PIO3_TCSOE (0x05 << 29)
+#define SBC_IDE_PIO3_TOECS (0x01 << 26)
+#define SBC_IDE_PIO3_TWCS (0x01 << 28)
+#define SBC_IDE_PIO3_TCSH (0x0D << 24)
+#define SBC_IDE_PIO3_TCSOFF (0x0D << 20)
+#define SBC_IDE_PIO3_TWP (0x15 << 14)
+#define SBC_IDE_PIO3_TCSW (0x05 << 10)
+#define SBC_IDE_PIO3_TPM (0x00 << 6)
+#define SBC_IDE_PIO3_TA (0x1A << 0)
/* Timing parameters PIO mode 4 */
-#define SBC_IDE_PIO4_TCSOE (0x04<<29)
-#define SBC_IDE_PIO4_TOECS (0x01<<26)
-#define SBC_IDE_PIO4_TWCS (0x01<<28)
-#define SBC_IDE_PIO4_TCSH (0x04<<24)
-#define SBC_IDE_PIO4_TCSOFF (0x04<<20)
-#define SBC_IDE_PIO4_TWP (0x0D<<14)
-#define SBC_IDE_PIO4_TCSW (0x03<<10)
-#define SBC_IDE_PIO4_TPM (0x00<<6)
-#define SBC_IDE_PIO4_TA (0x12<<0)
+#define SBC_IDE_PIO4_TCSOE (0x04 << 29)
+#define SBC_IDE_PIO4_TOECS (0x01 << 26)
+#define SBC_IDE_PIO4_TWCS (0x01 << 28)
+#define SBC_IDE_PIO4_TCSH (0x04 << 24)
+#define SBC_IDE_PIO4_TCSOFF (0x04 << 20)
+#define SBC_IDE_PIO4_TWP (0x0D << 14)
+#define SBC_IDE_PIO4_TCSW (0x03 << 10)
+#define SBC_IDE_PIO4_TPM (0x00 << 6)
+#define SBC_IDE_PIO4_TA (0x12 << 0)
/* Timing parameters MDMA mode 0 */
-#define SBC_IDE_MDMA0_TCSOE (0x03<<29)
-#define SBC_IDE_MDMA0_TOECS (0x01<<26)
-#define SBC_IDE_MDMA0_TWCS (0x01<<28)
-#define SBC_IDE_MDMA0_TCSH (0x07<<24)
-#define SBC_IDE_MDMA0_TCSOFF (0x07<<20)
-#define SBC_IDE_MDMA0_TWP (0x0C<<14)
-#define SBC_IDE_MDMA0_TCSW (0x03<<10)
-#define SBC_IDE_MDMA0_TPM (0x00<<6)
-#define SBC_IDE_MDMA0_TA (0x0F<<0)
+#define SBC_IDE_MDMA0_TCSOE (0x03 << 29)
+#define SBC_IDE_MDMA0_TOECS (0x01 << 26)
+#define SBC_IDE_MDMA0_TWCS (0x01 << 28)
+#define SBC_IDE_MDMA0_TCSH (0x07 << 24)
+#define SBC_IDE_MDMA0_TCSOFF (0x07 << 20)
+#define SBC_IDE_MDMA0_TWP (0x0C << 14)
+#define SBC_IDE_MDMA0_TCSW (0x03 << 10)
+#define SBC_IDE_MDMA0_TPM (0x00 << 6)
+#define SBC_IDE_MDMA0_TA (0x0F << 0)
/* Timing parameters MDMA mode 1 */
-#define SBC_IDE_MDMA1_TCSOE (0x05<<29)
-#define SBC_IDE_MDMA1_TOECS (0x01<<26)
-#define SBC_IDE_MDMA1_TWCS (0x01<<28)
-#define SBC_IDE_MDMA1_TCSH (0x05<<24)
-#define SBC_IDE_MDMA1_TCSOFF (0x05<<20)
-#define SBC_IDE_MDMA1_TWP (0x0F<<14)
-#define SBC_IDE_MDMA1_TCSW (0x05<<10)
-#define SBC_IDE_MDMA1_TPM (0x00<<6)
-#define SBC_IDE_MDMA1_TA (0x15<<0)
+#define SBC_IDE_MDMA1_TCSOE (0x05 << 29)
+#define SBC_IDE_MDMA1_TOECS (0x01 << 26)
+#define SBC_IDE_MDMA1_TWCS (0x01 << 28)
+#define SBC_IDE_MDMA1_TCSH (0x05 << 24)
+#define SBC_IDE_MDMA1_TCSOFF (0x05 << 20)
+#define SBC_IDE_MDMA1_TWP (0x0F << 14)
+#define SBC_IDE_MDMA1_TCSW (0x05 << 10)
+#define SBC_IDE_MDMA1_TPM (0x00 << 6)
+#define SBC_IDE_MDMA1_TA (0x15 << 0)
/* Timing parameters MDMA mode 2 */
-#define SBC_IDE_MDMA2_TCSOE (0x04<<29)
-#define SBC_IDE_MDMA2_TOECS (0x01<<26)
-#define SBC_IDE_MDMA2_TWCS (0x01<<28)
-#define SBC_IDE_MDMA2_TCSH (0x04<<24)
-#define SBC_IDE_MDMA2_TCSOFF (0x04<<20)
-#define SBC_IDE_MDMA2_TWP (0x0D<<14)
-#define SBC_IDE_MDMA2_TCSW (0x04<<10)
-#define SBC_IDE_MDMA2_TPM (0x00<<6)
-#define SBC_IDE_MDMA2_TA (0x12<<0)
+#define SBC_IDE_MDMA2_TCSOE (0x04 << 29)
+#define SBC_IDE_MDMA2_TOECS (0x01 << 26)
+#define SBC_IDE_MDMA2_TWCS (0x01 << 28)
+#define SBC_IDE_MDMA2_TCSH (0x04 << 24)
+#define SBC_IDE_MDMA2_TCSOFF (0x04 << 20)
+#define SBC_IDE_MDMA2_TWP (0x0D << 14)
+#define SBC_IDE_MDMA2_TCSW (0x04 << 10)
+#define SBC_IDE_MDMA2_TPM (0x00 << 6)
+#define SBC_IDE_MDMA2_TA (0x12 << 0)
#define SBC_IDE_TIMING(mode) \
- SBC_IDE_##mode##_TWCS | \
- SBC_IDE_##mode##_TCSH | \
- SBC_IDE_##mode##_TCSOFF | \
- SBC_IDE_##mode##_TWP | \
- SBC_IDE_##mode##_TCSW | \
- SBC_IDE_##mode##_TPM | \
- SBC_IDE_##mode##_TA
+ (SBC_IDE_##mode##_TWCS | \
+ SBC_IDE_##mode##_TCSH | \
+ SBC_IDE_##mode##_TCSOFF | \
+ SBC_IDE_##mode##_TWP | \
+ SBC_IDE_##mode##_TCSW | \
+ SBC_IDE_##mode##_TPM | \
+ SBC_IDE_##mode##_TA)
diff --git a/include/asm-mips/mach-au1x00/au1xxx_psc.h b/include/asm-mips/mach-au1x00/au1xxx_psc.h
index 1bd4e27..dae4eca 100644
--- a/include/asm-mips/mach-au1x00/au1xxx_psc.h
+++ b/include/asm-mips/mach-au1x00/au1xxx_psc.h
@@ -33,7 +33,6 @@
#ifndef _AU1000_PSC_H_
#define _AU1000_PSC_H_
-
/* The PSC base addresses. */
#ifdef CONFIG_SOC_AU1550
#define PSC0_BASE_ADDR 0xb1a00000
@@ -47,8 +46,8 @@
#define PSC1_BASE_ADDR 0xb1b00000
#endif
-/* The PSC select and control registers are common to
- * all protocols.
+/*
+ * The PSC select and control registers are common to all protocols.
*/
#define PSC_SEL_OFFSET 0x00000000
#define PSC_CTRL_OFFSET 0x00000004
@@ -59,18 +58,17 @@
#define PSC_SEL_CLK_SERCLK (2 << 4)
#define PSC_SEL_PS_MASK 0x00000007
-#define PSC_SEL_PS_DISABLED (0)
-#define PSC_SEL_PS_SPIMODE (2)
-#define PSC_SEL_PS_I2SMODE (3)
-#define PSC_SEL_PS_AC97MODE (4)
-#define PSC_SEL_PS_SMBUSMODE (5)
+#define PSC_SEL_PS_DISABLED 0
+#define PSC_SEL_PS_SPIMODE 2
+#define PSC_SEL_PS_I2SMODE 3
+#define PSC_SEL_PS_AC97MODE 4
+#define PSC_SEL_PS_SMBUSMODE 5
-#define PSC_CTRL_DISABLE (0)
-#define PSC_CTRL_SUSPEND (2)
-#define PSC_CTRL_ENABLE (3)
+#define PSC_CTRL_DISABLE 0
+#define PSC_CTRL_SUSPEND 2
+#define PSC_CTRL_ENABLE 3
-/* AC97 Registers.
-*/
+/* AC97 Registers. */
#define PSC_AC97CFG_OFFSET 0x00000008
#define PSC_AC97MSK_OFFSET 0x0000000c
#define PSC_AC97PCR_OFFSET 0x00000010
@@ -95,8 +93,7 @@
#define PSC_AC97GPO (AC97_PSC_BASE + PSC_AC97GPO_OFFSET)
#define PSC_AC97GPI (AC97_PSC_BASE + PSC_AC97GPI_OFFSET)
-/* AC97 Config Register.
-*/
+/* AC97 Config Register. */
#define PSC_AC97CFG_RT_MASK (3 << 30)
#define PSC_AC97CFG_RT_FIFO1 (0 << 30)
#define PSC_AC97CFG_RT_FIFO2 (1 << 30)
@@ -118,20 +115,19 @@
#define PSC_AC97CFG_RXSLOT_MASK (0x3ff << 1)
#define PSC_AC97CFG_GE_ENABLE (1)
-/* Enable slots 3-12.
-*/
+/* Enable slots 3-12. */
#define PSC_AC97CFG_TXSLOT_ENA(x) (1 << (((x) - 3) + 11))
#define PSC_AC97CFG_RXSLOT_ENA(x) (1 << (((x) - 3) + 1))
-/* The word length equation is ((x) * 2) + 2, so choose 'x' appropriately.
+/*
+ * The word length equation is ((x) * 2) + 2, so choose 'x' appropriately.
* The only sensible numbers are 7, 9, or possibly 11. Nah, just do the
* arithmetic in the macro.
*/
-#define PSC_AC97CFG_SET_LEN(x) (((((x)-2)/2) & 0xf) << 21)
+#define PSC_AC97CFG_SET_LEN(x) (((((x) - 2) / 2) & 0xf) << 21)
#define PSC_AC97CFG_GET_LEN(x) (((((x) >> 21) & 0xf) * 2) + 2)
-/* AC97 Mask Register.
-*/
+/* AC97 Mask Register. */
#define PSC_AC97MSK_GR (1 << 25)
#define PSC_AC97MSK_CD (1 << 24)
#define PSC_AC97MSK_RR (1 << 13)
@@ -148,8 +144,7 @@
PSC_AC97MSK_TO | PSC_AC97MSK_TU | \
PSC_AC97MSK_RD | PSC_AC97MSK_TD)
-/* AC97 Protocol Control Register.
-*/
+/* AC97 Protocol Control Register. */
#define PSC_AC97PCR_RC (1 << 6)
#define PSC_AC97PCR_RP (1 << 5)
#define PSC_AC97PCR_RS (1 << 4)
@@ -157,8 +152,7 @@
#define PSC_AC97PCR_TP (1 << 1)
#define PSC_AC97PCR_TS (1 << 0)
-/* AC97 Status register (read only).
-*/
+/* AC97 Status register (read only). */
#define PSC_AC97STAT_CB (1 << 26)
#define PSC_AC97STAT_CP (1 << 25)
#define PSC_AC97STAT_CR (1 << 24)
@@ -174,8 +168,7 @@
#define PSC_AC97STAT_DR (1 << 1)
#define PSC_AC97STAT_SR (1 << 0)
-/* AC97 Event Register.
-*/
+/* AC97 Event Register. */
#define PSC_AC97EVNT_GR (1 << 25)
#define PSC_AC97EVNT_CD (1 << 24)
#define PSC_AC97EVNT_RR (1 << 13)
@@ -187,22 +180,18 @@
#define PSC_AC97EVNT_RD (1 << 5)
#define PSC_AC97EVNT_TD (1 << 4)
-/* CODEC Command Register.
-*/
+/* CODEC Command Register. */
#define PSC_AC97CDC_RD (1 << 25)
#define PSC_AC97CDC_ID_MASK (3 << 23)
#define PSC_AC97CDC_INDX_MASK (0x7f << 16)
-#define PSC_AC97CDC_ID(x) (((x) & 0x3) << 23)
+#define PSC_AC97CDC_ID(x) (((x) & 0x03) << 23)
#define PSC_AC97CDC_INDX(x) (((x) & 0x7f) << 16)
-/* AC97 Reset Control Register.
-*/
+/* AC97 Reset Control Register. */
#define PSC_AC97RST_RST (1 << 1)
#define PSC_AC97RST_SNC (1 << 0)
-
-/* PSC in I2S Mode.
-*/
+/* PSC in I2S Mode. */
typedef struct psc_i2s {
u32 psc_sel;
u32 psc_ctrl;
@@ -215,8 +204,7 @@
u32 psc_i2sudf;
} psc_i2s_t;
-/* I2S Config Register.
-*/
+/* I2S Config Register. */
#define PSC_I2SCFG_RT_MASK (3 << 30)
#define PSC_I2SCFG_RT_FIFO1 (0 << 30)
#define PSC_I2SCFG_RT_FIFO2 (1 << 30)
@@ -247,8 +235,7 @@
#define PSC_I2SCFG_MLJ (1 << 10)
#define PSC_I2SCFG_XM (1 << 9)
-/* The word length equation is simply LEN+1.
- */
+/* The word length equation is simply LEN+1. */
#define PSC_I2SCFG_SET_LEN(x) ((((x) - 1) & 0x1f) << 4)
#define PSC_I2SCFG_GET_LEN(x) ((((x) >> 4) & 0x1f) + 1)
@@ -256,8 +243,7 @@
#define PSC_I2SCFG_MLF (1 << 1)
#define PSC_I2SCFG_MS (1 << 0)
-/* I2S Mask Register.
-*/
+/* I2S Mask Register. */
#define PSC_I2SMSK_RR (1 << 13)
#define PSC_I2SMSK_RO (1 << 12)
#define PSC_I2SMSK_RU (1 << 11)
@@ -271,8 +257,7 @@
PSC_I2SMSK_TO | PSC_I2SMSK_TU | \
PSC_I2SMSK_RD | PSC_I2SMSK_TD)
-/* I2S Protocol Control Register.
-*/
+/* I2S Protocol Control Register. */
#define PSC_I2SPCR_RC (1 << 6)
#define PSC_I2SPCR_RP (1 << 5)
#define PSC_I2SPCR_RS (1 << 4)
@@ -280,8 +265,7 @@
#define PSC_I2SPCR_TP (1 << 1)
#define PSC_I2SPCR_TS (1 << 0)
-/* I2S Status register (read only).
-*/
+/* I2S Status register (read only). */
#define PSC_I2SSTAT_RF (1 << 13)
#define PSC_I2SSTAT_RE (1 << 12)
#define PSC_I2SSTAT_RR (1 << 11)
@@ -294,8 +278,7 @@
#define PSC_I2SSTAT_DR (1 << 1)
#define PSC_I2SSTAT_SR (1 << 0)
-/* I2S Event Register.
-*/
+/* I2S Event Register. */
#define PSC_I2SEVNT_RR (1 << 13)
#define PSC_I2SEVNT_RO (1 << 12)
#define PSC_I2SEVNT_RU (1 << 11)
@@ -305,8 +288,7 @@
#define PSC_I2SEVNT_RD (1 << 5)
#define PSC_I2SEVNT_TD (1 << 4)
-/* PSC in SPI Mode.
-*/
+/* PSC in SPI Mode. */
typedef struct psc_spi {
u32 psc_sel;
u32 psc_ctrl;
@@ -318,8 +300,7 @@
u32 psc_spitxrx;
} psc_spi_t;
-/* SPI Config Register.
-*/
+/* SPI Config Register. */
#define PSC_SPICFG_RT_MASK (3 << 30)
#define PSC_SPICFG_RT_FIFO1 (0 << 30)
#define PSC_SPICFG_RT_FIFO2 (1 << 30)
@@ -355,8 +336,7 @@
#define PSC_SPICFG_MLF (1 << 1)
#define PSC_SPICFG_MO (1 << 0)
-/* SPI Mask Register.
-*/
+/* SPI Mask Register. */
#define PSC_SPIMSK_MM (1 << 16)
#define PSC_SPIMSK_RR (1 << 13)
#define PSC_SPIMSK_RO (1 << 12)
@@ -371,16 +351,14 @@
PSC_SPIMSK_TU | PSC_SPIMSK_SD | \
PSC_SPIMSK_MD)
-/* SPI Protocol Control Register.
-*/
+/* SPI Protocol Control Register. */
#define PSC_SPIPCR_RC (1 << 6)
#define PSC_SPIPCR_SP (1 << 5)
#define PSC_SPIPCR_SS (1 << 4)
#define PSC_SPIPCR_TC (1 << 2)
#define PSC_SPIPCR_MS (1 << 0)
-/* SPI Status register (read only).
-*/
+/* SPI Status register (read only). */
#define PSC_SPISTAT_RF (1 << 13)
#define PSC_SPISTAT_RE (1 << 12)
#define PSC_SPISTAT_RR (1 << 11)
@@ -393,8 +371,7 @@
#define PSC_SPISTAT_DR (1 << 1)
#define PSC_SPISTAT_SR (1 << 0)
-/* SPI Event Register.
-*/
+/* SPI Event Register. */
#define PSC_SPIEVNT_MM (1 << 16)
#define PSC_SPIEVNT_RR (1 << 13)
#define PSC_SPIEVNT_RO (1 << 12)
@@ -405,13 +382,11 @@
#define PSC_SPIEVNT_SD (1 << 5)
#define PSC_SPIEVNT_MD (1 << 4)
-/* Transmit register control.
-*/
+/* Transmit register control. */
#define PSC_SPITXRX_LC (1 << 29)
#define PSC_SPITXRX_SR (1 << 28)
-/* PSC in SMBus (I2C) Mode.
-*/
+/* PSC in SMBus (I2C) Mode. */
typedef struct psc_smb {
u32 psc_sel;
u32 psc_ctrl;
@@ -424,8 +399,7 @@
u32 psc_smbtmr;
} psc_smb_t;
-/* SMBus Config Register.
-*/
+/* SMBus Config Register. */
#define PSC_SMBCFG_RT_MASK (3 << 30)
#define PSC_SMBCFG_RT_FIFO1 (0 << 30)
#define PSC_SMBCFG_RT_FIFO2 (1 << 30)
@@ -452,8 +426,7 @@
#define PSC_SMBCFG_SET_SLV(x) (((x) & 0x7f) << 1)
-/* SMBus Mask Register.
-*/
+/* SMBus Mask Register. */
#define PSC_SMBMSK_DN (1 << 30)
#define PSC_SMBMSK_AN (1 << 29)
#define PSC_SMBMSK_AL (1 << 28)
@@ -471,13 +444,11 @@
PSC_SMBMSK_TU | PSC_SMBMSK_SD | \
PSC_SMBMSK_MD)
-/* SMBus Protocol Control Register.
-*/
+/* SMBus Protocol Control Register. */
#define PSC_SMBPCR_DC (1 << 2)
#define PSC_SMBPCR_MS (1 << 0)
-/* SMBus Status register (read only).
-*/
+/* SMBus Status register (read only). */
#define PSC_SMBSTAT_BB (1 << 28)
#define PSC_SMBSTAT_RF (1 << 13)
#define PSC_SMBSTAT_RE (1 << 12)
@@ -491,8 +462,7 @@
#define PSC_SMBSTAT_DR (1 << 1)
#define PSC_SMBSTAT_SR (1 << 0)
-/* SMBus Event Register.
-*/
+/* SMBus Event Register. */
#define PSC_SMBEVNT_DN (1 << 30)
#define PSC_SMBEVNT_AN (1 << 29)
#define PSC_SMBEVNT_AL (1 << 28)
@@ -510,15 +480,13 @@
PSC_SMBEVNT_TU | PSC_SMBEVNT_SD | \
PSC_SMBEVNT_MD)
-/* Transmit register control.
-*/
+/* Transmit register control. */
#define PSC_SMBTXRX_RSR (1 << 28)
#define PSC_SMBTXRX_STP (1 << 29)
-#define PSC_SMBTXRX_DATAMASK (0xff)
+#define PSC_SMBTXRX_DATAMASK 0xff
-/* SMBus protocol timers register.
-*/
-#define PSC_SMBTMR_SET_TH(x) (((x) & 0x3) << 30)
+/* SMBus protocol timers register. */
+#define PSC_SMBTMR_SET_TH(x) (((x) & 0x03) << 30)
#define PSC_SMBTMR_SET_PS(x) (((x) & 0x1f) << 25)
#define PSC_SMBTMR_SET_PU(x) (((x) & 0x1f) << 20)
#define PSC_SMBTMR_SET_SH(x) (((x) & 0x1f) << 15)
@@ -526,5 +494,4 @@
#define PSC_SMBTMR_SET_CL(x) (((x) & 0x1f) << 5)
#define PSC_SMBTMR_SET_CH(x) (((x) & 0x1f) << 0)
-
#endif /* _AU1000_PSC_H_ */
diff --git a/include/asm-mips/mach-db1x00/db1200.h b/include/asm-mips/mach-db1x00/db1200.h
index eedd048..27f2610 100644
--- a/include/asm-mips/mach-db1x00/db1200.h
+++ b/include/asm-mips/mach-db1x00/db1200.h
@@ -1,6 +1,6 @@
/*
- * AMD Alchemy DB1200 Referrence Board
- * Board Registers defines.
+ * AMD Alchemy DBAu1200 Reference Board
+ * Board register defines.
*
* ########################################################################
*
@@ -27,26 +27,25 @@
#include <linux/types.h>
#include <asm/mach-au1x00/au1xxx_psc.h>
-// This is defined in au1000.h with bogus value
-#undef AU1X00_EXTERNAL_INT
+#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX
+#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX
+#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC1_TX
+#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC1_RX
-#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX
-#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX
-#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC1_TX
-#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC1_RX
-
-/* SPI and SMB are muxed on the Pb1200 board.
- Refer to board documentation.
+/*
+ * SPI and SMB are muxed on the DBAu1200 board.
+ * Refer to board documentation.
*/
-#define SPI_PSC_BASE PSC0_BASE_ADDR
-#define SMBUS_PSC_BASE PSC0_BASE_ADDR
-/* AC97 and I2S are muxed on the Pb1200 board.
- Refer to board documentation.
+#define SPI_PSC_BASE PSC0_BASE_ADDR
+#define SMBUS_PSC_BASE PSC0_BASE_ADDR
+/*
+ * AC'97 and I2S are muxed on the DBAu1200 board.
+ * Refer to board documentation.
*/
-#define AC97_PSC_BASE PSC1_BASE_ADDR
+#define AC97_PSC_BASE PSC1_BASE_ADDR
#define I2S_PSC_BASE PSC1_BASE_ADDR
-#define BCSR_KSEG1_ADDR 0xB9800000
+#define BCSR_KSEG1_ADDR 0xB9800000
typedef volatile struct
{
@@ -102,9 +101,9 @@
#define BCSR_STATUS_SWAPBOOT 0x0040
#define BCSR_STATUS_FLASHBUSY 0x0100
#define BCSR_STATUS_IDECBLID 0x0200
-#define BCSR_STATUS_SD0WP 0x0400
-#define BCSR_STATUS_U0RXD 0x1000
-#define BCSR_STATUS_U1RXD 0x2000
+#define BCSR_STATUS_SD0WP 0x0400
+#define BCSR_STATUS_U0RXD 0x1000
+#define BCSR_STATUS_U1RXD 0x2000
#define BCSR_SWITCHES_OCTAL 0x00FF
#define BCSR_SWITCHES_DIP_1 0x0080
@@ -122,8 +121,8 @@
#define BCSR_RESETS_DC 0x0004
#define BCSR_RESETS_IDE 0x0008
#define BCSR_RESETS_TV 0x0010
-/* not resets but in the same register */
-#define BCSR_RESETS_PWMR1mUX 0x0800
+/* Not resets but in the same register */
+#define BCSR_RESETS_PWMR1MUX 0x0800
#define BCSR_RESETS_PCS0MUX 0x1000
#define BCSR_RESETS_PCS1MUX 0x2000
#define BCSR_RESETS_SPISEL 0x4000
@@ -160,7 +159,7 @@
#define BCSR_INT_PC0STSCHG 0x0008
#define BCSR_INT_PC1 0x0010
#define BCSR_INT_PC1STSCHG 0x0020
-#define BCSR_INT_DC 0x0040
+#define BCSR_INT_DC 0x0040
#define BCSR_INT_FLASHBUSY 0x0080
#define BCSR_INT_PC0INSERT 0x0100
#define BCSR_INT_PC0EJECT 0x0200
@@ -179,10 +178,10 @@
#define IDE_DDMA_REQ DSCR_CMD0_DMA_REQ1
#define IDE_RQSIZE 128
-#define NAND_PHYS_ADDR 0x20000000
+#define NAND_PHYS_ADDR 0x20000000
/*
- * External Interrupts for Pb1200 as of 8/6/2004.
+ * External Interrupts for DBAu1200 as of 8/6/2004.
* Bit positions in the CPLD registers can be calculated by taking
* the interrupt define and subtracting the DB1200_INT_BEGIN value.
*
@@ -211,23 +210,21 @@
};
-/* For drivers/pcmcia/au1000_db1x00.c */
-
-/* PCMCIA Db1x00 specific defines */
-
-#define PCMCIA_MAX_SOCK 1
-#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK+1)
+/*
+ * DBAu1200 specific PCMCIA defines for drivers/pcmcia/au1000_db1x00.c
+ */
+#define PCMCIA_MAX_SOCK 1
+#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)
/* VPP/VCC */
-#define SET_VCC_VPP(VCC, VPP, SLOT)\
- ((((VCC)<<2) | ((VPP)<<0)) << ((SLOT)*8))
+#define SET_VCC_VPP(VCC, VPP, SLOT) \
+ ((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8))
-#define BOARD_PC0_INT DB1200_PC0_INT
-#define BOARD_PC1_INT DB1200_PC1_INT
-#define BOARD_CARD_INSERTED(SOCKET) bcsr->sig_status & (1<<(8+(2*SOCKET)))
+#define BOARD_PC0_INT DB1200_PC0_INT
+#define BOARD_PC1_INT DB1200_PC1_INT
+#define BOARD_CARD_INSERTED(SOCKET) bcsr->sig_status & (1 << (8 + (2 * SOCKET)))
-/* Nand chip select */
+/* NAND chip select */
#define NAND_CS 1
#endif /* __ASM_DB1200_H */
-
diff --git a/include/asm-mips/mach-db1x00/db1x00.h b/include/asm-mips/mach-db1x00/db1x00.h
index e7a88ba..612ae90 100644
--- a/include/asm-mips/mach-db1x00/db1x00.h
+++ b/include/asm-mips/mach-db1x00/db1x00.h
@@ -1,9 +1,8 @@
/*
- * AMD Alchemy DB1x00 Reference Boards
+ * AMD Alchemy DBAu1x00 Reference Boards
*
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2001, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
* Copyright (C) 2005 Ralf Baechle (ralf@linux-mips.org)
*
* ########################################################################
@@ -32,26 +31,26 @@
#ifdef CONFIG_MIPS_DB1550
-#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX
-#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX
-#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC3_TX
-#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC3_RX
+#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX
+#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX
+#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC3_TX
+#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC3_RX
-#define SPI_PSC_BASE PSC0_BASE_ADDR
-#define AC97_PSC_BASE PSC1_BASE_ADDR
-#define SMBUS_PSC_BASE PSC2_BASE_ADDR
-#define I2S_PSC_BASE PSC3_BASE_ADDR
+#define SPI_PSC_BASE PSC0_BASE_ADDR
+#define AC97_PSC_BASE PSC1_BASE_ADDR
+#define SMBUS_PSC_BASE PSC2_BASE_ADDR
+#define I2S_PSC_BASE PSC3_BASE_ADDR
-#define BCSR_KSEG1_ADDR 0xAF000000
-#define NAND_PHYS_ADDR 0x20000000
+#define BCSR_KSEG1_ADDR 0xAF000000
+#define NAND_PHYS_ADDR 0x20000000
#else
#define BCSR_KSEG1_ADDR 0xAE000000
#endif
/*
- * Overlay data structure of the Db1x00 board registers.
- * Registers located at physical 0E0000xx, KSEG1 0xAE0000xx
+ * Overlay data structure of the DBAu1x00 board registers.
+ * Registers are located at physical 0E0000xx, KSEG1 0xAE0000xx.
*/
typedef volatile struct
{
@@ -138,18 +137,19 @@
#define BCSR_SWRESET_RESET 0x0080
-/* PCMCIA Db1x00 specific defines */
-#define PCMCIA_MAX_SOCK 1
-#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK+1)
+/* PCMCIA DBAu1x00 specific defines */
+#define PCMCIA_MAX_SOCK 1
+#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)
/* VPP/VCC */
#define SET_VCC_VPP(VCC, VPP, SLOT)\
- ((((VCC)<<2) | ((VPP)<<0)) << ((SLOT)*8))
+ ((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8))
-/* SD controller macros */
/*
- * Detect card.
+ * SD controller macros
*/
+
+/* Detect card. */
#define mmc_card_inserted(_n_, _res_) \
do { \
BCSR * const bcsr = (BCSR *)0xAE000000; \
@@ -176,10 +176,10 @@
unsigned long mmc_pwr, mmc_wp, board_specific; \
if ((_n_)) { \
mmc_pwr = BCSR_BOARD_SD1_PWR; \
- mmc_wp = BCSR_BOARD_SD1_WP; \
+ mmc_wp = BCSR_BOARD_SD1_WP; \
} else { \
mmc_pwr = BCSR_BOARD_SD0_PWR; \
- mmc_wp = BCSR_BOARD_SD0_WP; \
+ mmc_wp = BCSR_BOARD_SD0_WP; \
} \
board_specific = au_readl((unsigned long)(&bcsr->specific)); \
if (!(board_specific & mmc_wp)) {/* low means card present */ \
@@ -190,17 +190,19 @@
} while (0)
-/* NAND defines */
-/* Timing values as described in databook, * ns value stripped of
+/*
+ * NAND defines
+ *
+ * Timing values as described in databook, * ns value stripped of the
* lower 2 bits.
- * These defines are here rather than an SOC1550 generic file because
+ * These defines are here rather than an Au1550 generic file because
* the parts chosen on another board may be different and may require
* different timings.
*/
-#define NAND_T_H (18 >> 2)
-#define NAND_T_PUL (30 >> 2)
-#define NAND_T_SU (30 >> 2)
-#define NAND_T_WH (30 >> 2)
+#define NAND_T_H (18 >> 2)
+#define NAND_T_PUL (30 >> 2)
+#define NAND_T_SU (30 >> 2)
+#define NAND_T_WH (30 >> 2)
/* Bitfield shift amounts */
#define NAND_T_H_SHIFT 0
@@ -208,16 +210,15 @@
#define NAND_T_SU_SHIFT 8
#define NAND_T_WH_SHIFT 12
-#define NAND_TIMING ((NAND_T_H & 0xF) << NAND_T_H_SHIFT) | \
- ((NAND_T_PUL & 0xF) << NAND_T_PUL_SHIFT) | \
- ((NAND_T_SU & 0xF) << NAND_T_SU_SHIFT) | \
- ((NAND_T_WH & 0xF) << NAND_T_WH_SHIFT)
-#define NAND_CS 1
+#define NAND_TIMING (((NAND_T_H & 0xF) << NAND_T_H_SHIFT) | \
+ ((NAND_T_PUL & 0xF) << NAND_T_PUL_SHIFT) | \
+ ((NAND_T_SU & 0xF) << NAND_T_SU_SHIFT) | \
+ ((NAND_T_WH & 0xF) << NAND_T_WH_SHIFT))
+#define NAND_CS 1
-/* should be done by yamon */
-#define NAND_STCFG 0x00400005 /* 8-bit NAND */
-#define NAND_STTIME 0x00007774 /* valid for 396MHz SD=2 only */
-#define NAND_STADDR 0x12000FFF /* physical address 0x20000000 */
+/* Should be done by YAMON */
+#define NAND_STCFG 0x00400005 /* 8-bit NAND */
+#define NAND_STTIME 0x00007774 /* valid for 396 MHz SD=2 only */
+#define NAND_STADDR 0x12000FFF /* physical address 0x20000000 */
#endif /* __ASM_DB1X00_H */
-
diff --git a/include/asm-mips/mach-pb1x00/pb1000.h b/include/asm-mips/mach-pb1x00/pb1000.h
index b52e0e7..6d1ff90 100644
--- a/include/asm-mips/mach-pb1x00/pb1000.h
+++ b/include/asm-mips/mach-pb1x00/pb1000.h
@@ -1,9 +1,8 @@
/*
- * Alchemy Semi PB1000 Referrence Board
+ * Alchemy Semi Pb1000 Referrence Board
*
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2001, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* ########################################################################
*
@@ -28,145 +27,61 @@
#define __ASM_PB1000_H
/* PCMCIA PB1000 specific defines */
-#define PCMCIA_MAX_SOCK 1
-#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK+1)
+#define PCMCIA_MAX_SOCK 1
+#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)
-#define PB1000_PCR 0xBE000000
-# define PCR_SLOT_0_VPP0 (1<<0)
-# define PCR_SLOT_0_VPP1 (1<<1)
-# define PCR_SLOT_0_VCC0 (1<<2)
-# define PCR_SLOT_0_VCC1 (1<<3)
-# define PCR_SLOT_0_RST (1<<4)
+#define PB1000_PCR 0xBE000000
+# define PCR_SLOT_0_VPP0 (1 << 0)
+# define PCR_SLOT_0_VPP1 (1 << 1)
+# define PCR_SLOT_0_VCC0 (1 << 2)
+# define PCR_SLOT_0_VCC1 (1 << 3)
+# define PCR_SLOT_0_RST (1 << 4)
+# define PCR_SLOT_1_VPP0 (1 << 8)
+# define PCR_SLOT_1_VPP1 (1 << 9)
+# define PCR_SLOT_1_VCC0 (1 << 10)
+# define PCR_SLOT_1_VCC1 (1 << 11)
+# define PCR_SLOT_1_RST (1 << 12)
-# define PCR_SLOT_1_VPP0 (1<<8)
-# define PCR_SLOT_1_VPP1 (1<<9)
-# define PCR_SLOT_1_VCC0 (1<<10)
-# define PCR_SLOT_1_VCC1 (1<<11)
-# define PCR_SLOT_1_RST (1<<12)
+#define PB1000_MDR 0xBE000004
+# define MDR_PI (1 << 5) /* PCMCIA int latch */
+# define MDR_EPI (1 << 14) /* enable PCMCIA int */
+# define MDR_CPI (1 << 15) /* clear PCMCIA int */
-#define PB1000_MDR 0xBE000004
-# define MDR_PI (1<<5) /* pcmcia int latch */
-# define MDR_EPI (1<<14) /* enable pcmcia int */
-# define MDR_CPI (1<<15) /* clear pcmcia int */
+#define PB1000_ACR1 0xBE000008
+# define ACR1_SLOT_0_CD1 (1 << 0) /* card detect 1 */
+# define ACR1_SLOT_0_CD2 (1 << 1) /* card detect 2 */
+# define ACR1_SLOT_0_READY (1 << 2) /* ready */
+# define ACR1_SLOT_0_STATUS (1 << 3) /* status change */
+# define ACR1_SLOT_0_VS1 (1 << 4) /* voltage sense 1 */
+# define ACR1_SLOT_0_VS2 (1 << 5) /* voltage sense 2 */
+# define ACR1_SLOT_0_INPACK (1 << 6) /* inpack pin status */
+# define ACR1_SLOT_1_CD1 (1 << 8) /* card detect 1 */
+# define ACR1_SLOT_1_CD2 (1 << 9) /* card detect 2 */
+# define ACR1_SLOT_1_READY (1 << 10) /* ready */
+# define ACR1_SLOT_1_STATUS (1 << 11) /* status change */
+# define ACR1_SLOT_1_VS1 (1 << 12) /* voltage sense 1 */
+# define ACR1_SLOT_1_VS2 (1 << 13) /* voltage sense 2 */
+# define ACR1_SLOT_1_INPACK (1 << 14) /* inpack pin status */
-#define PB1000_ACR1 0xBE000008
-# define ACR1_SLOT_0_CD1 (1<<0) /* card detect 1 */
-# define ACR1_SLOT_0_CD2 (1<<1) /* card detect 2 */
-# define ACR1_SLOT_0_READY (1<<2) /* ready */
-# define ACR1_SLOT_0_STATUS (1<<3) /* status change */
-# define ACR1_SLOT_0_VS1 (1<<4) /* voltage sense 1 */
-# define ACR1_SLOT_0_VS2 (1<<5) /* voltage sense 2 */
-# define ACR1_SLOT_0_INPACK (1<<6) /* inpack pin status */
-# define ACR1_SLOT_1_CD1 (1<<8) /* card detect 1 */
-# define ACR1_SLOT_1_CD2 (1<<9) /* card detect 2 */
-# define ACR1_SLOT_1_READY (1<<10) /* ready */
-# define ACR1_SLOT_1_STATUS (1<<11) /* status change */
-# define ACR1_SLOT_1_VS1 (1<<12) /* voltage sense 1 */
-# define ACR1_SLOT_1_VS2 (1<<13) /* voltage sense 2 */
-# define ACR1_SLOT_1_INPACK (1<<14) /* inpack pin status */
-
-#define CPLD_AUX0 0xBE00000C
-#define CPLD_AUX1 0xBE000010
-#define CPLD_AUX2 0xBE000014
+#define CPLD_AUX0 0xBE00000C
+#define CPLD_AUX1 0xBE000010
+#define CPLD_AUX2 0xBE000014
/* Voltage levels */
/* VPPEN1 - VPPEN0 */
-#define VPP_GND ((0<<1) | (0<<0))
-#define VPP_5V ((1<<1) | (0<<0))
-#define VPP_3V ((0<<1) | (1<<0))
-#define VPP_12V ((0<<1) | (1<<0))
-#define VPP_HIZ ((1<<1) | (1<<0))
+#define VPP_GND ((0 << 1) | (0 << 0))
+#define VPP_5V ((1 << 1) | (0 << 0))
+#define VPP_3V ((0 << 1) | (1 << 0))
+#define VPP_12V ((0 << 1) | (1 << 0))
+#define VPP_HIZ ((1 << 1) | (1 << 0))
/* VCCEN1 - VCCEN0 */
-#define VCC_3V ((0<<1) | (1<<0))
-#define VCC_5V ((1<<1) | (0<<0))
-#define VCC_HIZ ((0<<1) | (0<<0))
+#define VCC_3V ((0 << 1) | (1 << 0))
+#define VCC_5V ((1 << 1) | (0 << 0))
+#define VCC_HIZ ((0 << 1) | (0 << 0))
/* VPP/VCC */
-#define SET_VCC_VPP(VCC, VPP, SLOT)\
- ((((VCC)<<2) | ((VPP)<<0)) << ((SLOT)*8))
-
-
-/* PCI PB1000 specific defines */
-/* The reason these defines are here instead of au1000.h is because
- * the Au1000 does not have a PCI bus controller so the PCI implementation
- * on the some of the older Pb1000 boards was very board specific.
- */
-#define PCI_CONFIG_BASE 0xBA020000 /* the only external slot */
-
-#define SDRAM_DEVID 0xBA010000
-#define SDRAM_CMD 0xBA010004
-#define SDRAM_CLASS 0xBA010008
-#define SDRAM_MISC 0xBA01000C
-#define SDRAM_MBAR 0xBA010010
-
-#define PCI_IO_DATA_PORT 0xBA800000
-
-#define PCI_IO_ADDR 0xBE00001C
-#define PCI_INT_ACK 0xBBC00000
-#define PCI_IO_READ 0xBBC00020
-#define PCI_IO_WRITE 0xBBC00030
-
-#define PCI_BRIDGE_CONFIG 0xBE000018
-
-#define PCI_IO_START 0x10000000
-#define PCI_IO_END 0x1000ffff
-#define PCI_MEM_START 0x18000000
-#define PCI_MEM_END 0x18ffffff
-
-#define PCI_FIRST_DEVFN 0
-#define PCI_LAST_DEVFN 1
-
-static inline u8 au_pci_io_readb(u32 addr)
-{
- writel(addr, PCI_IO_ADDR);
- writel((readl(PCI_BRIDGE_CONFIG) & 0xffffcfff) | (1<<12), PCI_BRIDGE_CONFIG);
- return (readl(PCI_IO_DATA_PORT) & 0xff);
-}
-
-static inline u16 au_pci_io_readw(u32 addr)
-{
- writel(addr, PCI_IO_ADDR);
- writel((readl(PCI_BRIDGE_CONFIG) & 0xffffcfff) | (1<<13), PCI_BRIDGE_CONFIG);
- return (readl(PCI_IO_DATA_PORT) & 0xffff);
-}
-
-static inline u32 au_pci_io_readl(u32 addr)
-{
- writel(addr, PCI_IO_ADDR);
- writel((readl(PCI_BRIDGE_CONFIG) & 0xffffcfff), PCI_BRIDGE_CONFIG);
- return readl(PCI_IO_DATA_PORT);
-}
-
-static inline void au_pci_io_writeb(u8 val, u32 addr)
-{
- writel(addr, PCI_IO_ADDR);
- writel((readl(PCI_BRIDGE_CONFIG) & 0xffffcfff) | (1<<12), PCI_BRIDGE_CONFIG);
- writel(val, PCI_IO_DATA_PORT);
-}
-
-static inline void au_pci_io_writew(u16 val, u32 addr)
-{
- writel(addr, PCI_IO_ADDR);
- writel((readl(PCI_BRIDGE_CONFIG) & 0xffffcfff) | (1<<13), PCI_BRIDGE_CONFIG);
- writel(val, PCI_IO_DATA_PORT);
-}
-
-static inline void au_pci_io_writel(u32 val, u32 addr)
-{
- writel(addr, PCI_IO_ADDR);
- writel(readl(PCI_BRIDGE_CONFIG) & 0xffffcfff, PCI_BRIDGE_CONFIG);
- writel(val, PCI_IO_DATA_PORT);
-}
-
-static inline void set_sdram_extbyte(void)
-{
- writel(readl(PCI_BRIDGE_CONFIG) & 0xffffff00, PCI_BRIDGE_CONFIG);
-}
-
-static inline void set_slot_extbyte(void)
-{
- writel((readl(PCI_BRIDGE_CONFIG) & 0xffffbf00) | 0x18, PCI_BRIDGE_CONFIG);
-}
+#define SET_VCC_VPP(VCC, VPP, SLOT) \
+ ((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8))
#endif /* __ASM_PB1000_H */
diff --git a/include/asm-mips/mach-pb1x00/pb1100.h b/include/asm-mips/mach-pb1x00/pb1100.h
index 63aa392..b1a60f1 100644
--- a/include/asm-mips/mach-pb1x00/pb1100.h
+++ b/include/asm-mips/mach-pb1x00/pb1100.h
@@ -1,9 +1,8 @@
/*
- * Alchemy Semi PB1100 Referrence Board
+ * Alchemy Semi Pb1100 Referrence Board
*
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2001, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* ########################################################################
*
@@ -27,59 +26,60 @@
#ifndef __ASM_PB1100_H
#define __ASM_PB1100_H
-#define PB1100_IDENT 0xAE000000
-#define BOARD_STATUS_REG 0xAE000004
-# define PB1100_ROM_SEL (1<<15)
-# define PB1100_ROM_SIZ (1<<14)
-# define PB1100_SWAP_BOOT (1<<13)
-# define PB1100_FLASH_WP (1<<12)
-# define PB1100_ROM_H_STS (1<<11)
-# define PB1100_ROM_L_STS (1<<10)
-# define PB1100_FLASH_H_STS (1<<9)
-# define PB1100_FLASH_L_STS (1<<8)
-# define PB1100_SRAM_SIZ (1<<7)
-# define PB1100_TSC_BUSY (1<<6)
-# define PB1100_PCMCIA_VS_MASK (3<<4)
-# define PB1100_RS232_CD (1<<3)
-# define PB1100_RS232_CTS (1<<2)
-# define PB1100_RS232_DSR (1<<1)
-# define PB1100_RS232_RI (1<<0)
+#define PB1100_IDENT 0xAE000000
+#define BOARD_STATUS_REG 0xAE000004
+# define PB1100_ROM_SEL (1 << 15)
+# define PB1100_ROM_SIZ (1 << 14)
+# define PB1100_SWAP_BOOT (1 << 13)
+# define PB1100_FLASH_WP (1 << 12)
+# define PB1100_ROM_H_STS (1 << 11)
+# define PB1100_ROM_L_STS (1 << 10)
+# define PB1100_FLASH_H_STS (1 << 9)
+# define PB1100_FLASH_L_STS (1 << 8)
+# define PB1100_SRAM_SIZ (1 << 7)
+# define PB1100_TSC_BUSY (1 << 6)
+# define PB1100_PCMCIA_VS_MASK (3 << 4)
+# define PB1100_RS232_CD (1 << 3)
+# define PB1100_RS232_CTS (1 << 2)
+# define PB1100_RS232_DSR (1 << 1)
+# define PB1100_RS232_RI (1 << 0)
-#define PB1100_IRDA_RS232 0xAE00000C
-# define PB1100_IRDA_FULL (0<<14) /* full power */
-# define PB1100_IRDA_SHUTDOWN (1<<14)
-# define PB1100_IRDA_TT (2<<14) /* 2/3 power */
-# define PB1100_IRDA_OT (3<<14) /* 1/3 power */
-# define PB1100_IRDA_FIR (1<<13)
+#define PB1100_IRDA_RS232 0xAE00000C
+# define PB1100_IRDA_FULL (0 << 14) /* full power */
+# define PB1100_IRDA_SHUTDOWN (1 << 14)
+# define PB1100_IRDA_TT (2 << 14) /* 2/3 power */
+# define PB1100_IRDA_OT (3 << 14) /* 1/3 power */
+# define PB1100_IRDA_FIR (1 << 13)
-#define PCMCIA_BOARD_REG 0xAE000010
-# define PB1100_SD_WP1_RO (1<<15) /* read only */
-# define PB1100_SD_WP0_RO (1<<14) /* read only */
-# define PB1100_SD_PWR1 (1<<11) /* applies power to SD1 */
-# define PB1100_SD_PWR0 (1<<10) /* applies power to SD0 */
-# define PB1100_SEL_SD_CONN1 (1<<9)
-# define PB1100_SEL_SD_CONN0 (1<<8)
-# define PC_DEASSERT_RST (1<<7)
-# define PC_DRV_EN (1<<4)
+#define PCMCIA_BOARD_REG 0xAE000010
+# define PB1100_SD_WP1_RO (1 << 15) /* read only */
+# define PB1100_SD_WP0_RO (1 << 14) /* read only */
+# define PB1100_SD_PWR1 (1 << 11) /* applies power to SD1 */
+# define PB1100_SD_PWR0 (1 << 10) /* applies power to SD0 */
+# define PB1100_SEL_SD_CONN1 (1 << 9)
+# define PB1100_SEL_SD_CONN0 (1 << 8)
+# define PC_DEASSERT_RST (1 << 7)
+# define PC_DRV_EN (1 << 4)
-#define PB1100_G_CONTROL 0xAE000014 /* graphics control */
+#define PB1100_G_CONTROL 0xAE000014 /* graphics control */
-#define PB1100_RST_VDDI 0xAE00001C
-# define PB1100_SOFT_RESET (1<<15) /* clear to reset the board */
-# define PB1100_VDDI_MASK (0x1F)
+#define PB1100_RST_VDDI 0xAE00001C
+# define PB1100_SOFT_RESET (1 << 15) /* clear to reset the board */
+# define PB1100_VDDI_MASK 0x1F
-#define PB1100_LEDS 0xAE000018
+#define PB1100_LEDS 0xAE000018
-/* 11:8 is 4 discreet LEDs. Clearing a bit illuminates the LED.
- * 7:0 is the LED Display's decimal points.
+/*
+ * 11:8 is 4 discreet LEDs. Clearing a bit illuminates the LED.
+ * 7:0 is the LED Display's decimal points.
*/
-#define PB1100_HEX_LED 0xAE000018
+#define PB1100_HEX_LED 0xAE000018
-/* PCMCIA PB1100 specific defines */
-#define PCMCIA_MAX_SOCK 0
-#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK+1)
+/* PCMCIA Pb1100 specific defines */
+#define PCMCIA_MAX_SOCK 0
+#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)
/* VPP/VCC */
-#define SET_VCC_VPP(VCC, VPP) (((VCC)<<2) | ((VPP)<<0))
+#define SET_VCC_VPP(VCC, VPP) (((VCC) << 2) | ((VPP) << 0))
#endif /* __ASM_PB1100_H */
diff --git a/include/asm-mips/mach-pb1x00/pb1200.h b/include/asm-mips/mach-pb1x00/pb1200.h
index e2c6bca..c8618df 100644
--- a/include/asm-mips/mach-pb1x00/pb1200.h
+++ b/include/asm-mips/mach-pb1x00/pb1200.h
@@ -1,5 +1,5 @@
/*
- * AMD Alchemy PB1200 Referrence Board
+ * AMD Alchemy Pb1200 Referrence Board
* Board Registers defines.
*
* ########################################################################
@@ -27,21 +27,20 @@
#include <linux/types.h>
#include <asm/mach-au1x00/au1xxx_psc.h>
-// This is defined in au1000.h with bogus value
-#undef AU1X00_EXTERNAL_INT
+#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX
+#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX
+#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC1_TX
+#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC1_RX
-#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX
-#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX
-#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC1_TX
-#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC1_RX
-
-/* SPI and SMB are muxed on the Pb1200 board.
- Refer to board documentation.
+/*
+ * SPI and SMB are muxed on the Pb1200 board.
+ * Refer to board documentation.
*/
-#define SPI_PSC_BASE PSC0_BASE_ADDR
-#define SMBUS_PSC_BASE PSC0_BASE_ADDR
-/* AC97 and I2S are muxed on the Pb1200 board.
- Refer to board documentation.
+#define SPI_PSC_BASE PSC0_BASE_ADDR
+#define SMBUS_PSC_BASE PSC0_BASE_ADDR
+/*
+ * AC97 and I2S are muxed on the Pb1200 board.
+ * Refer to board documentation.
*/
#define AC97_PSC_BASE PSC1_BASE_ADDR
#define I2S_PSC_BASE PSC1_BASE_ADDR
@@ -102,10 +101,10 @@
#define BCSR_STATUS_SWAPBOOT 0x0040
#define BCSR_STATUS_FLASHBUSY 0x0100
#define BCSR_STATUS_IDECBLID 0x0200
-#define BCSR_STATUS_SD0WP 0x0400
-#define BCSR_STATUS_SD1WP 0x0800
-#define BCSR_STATUS_U0RXD 0x1000
-#define BCSR_STATUS_U1RXD 0x2000
+#define BCSR_STATUS_SD0WP 0x0400
+#define BCSR_STATUS_SD1WP 0x0800
+#define BCSR_STATUS_U0RXD 0x1000
+#define BCSR_STATUS_U1RXD 0x2000
#define BCSR_SWITCHES_OCTAL 0x00FF
#define BCSR_SWITCHES_DIP_1 0x0080
@@ -123,11 +122,11 @@
#define BCSR_RESETS_DC 0x0004
#define BCSR_RESETS_IDE 0x0008
/* not resets but in the same register */
-#define BCSR_RESETS_WSCFSM 0x0800
+#define BCSR_RESETS_WSCFSM 0x0800
#define BCSR_RESETS_PCS0MUX 0x1000
#define BCSR_RESETS_PCS1MUX 0x2000
#define BCSR_RESETS_SPISEL 0x4000
-#define BCSR_RESETS_SD1MUX 0x8000
+#define BCSR_RESETS_SD1MUX 0x8000
#define BCSR_PCMCIA_PC0VPP 0x0003
#define BCSR_PCMCIA_PC0VCC 0x000C
@@ -163,7 +162,7 @@
#define BCSR_INT_PC0STSCHG 0x0008
#define BCSR_INT_PC1 0x0010
#define BCSR_INT_PC1STSCHG 0x0020
-#define BCSR_INT_DC 0x0040
+#define BCSR_INT_DC 0x0040
#define BCSR_INT_FLASHBUSY 0x0080
#define BCSR_INT_PC0INSERT 0x0100
#define BCSR_INT_PC0EJECT 0x0200
@@ -174,14 +173,6 @@
#define BCSR_INT_SD1INSERT 0x4000
#define BCSR_INT_SD1EJECT 0x8000
-/* PCMCIA Db1x00 specific defines */
-#define PCMCIA_MAX_SOCK 1
-#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK+1)
-
-/* VPP/VCC */
-#define SET_VCC_VPP(VCC, VPP, SLOT)\
- ((((VCC)<<2) | ((VPP)<<0)) << ((SLOT)*8))
-
#define SMC91C111_PHYS_ADDR 0x0D000300
#define SMC91C111_INT PB1200_ETH_INT
@@ -192,18 +183,19 @@
#define IDE_DDMA_REQ DSCR_CMD0_DMA_REQ1
#define IDE_RQSIZE 128
-#define NAND_PHYS_ADDR 0x1C000000
+#define NAND_PHYS_ADDR 0x1C000000
-/* Timing values as described in databook, * ns value stripped of
+/*
+ * Timing values as described in databook, * ns value stripped of
* lower 2 bits.
- * These defines are here rather than an SOC1200 generic file because
+ * These defines are here rather than an Au1200 generic file because
* the parts chosen on another board may be different and may require
* different timings.
*/
-#define NAND_T_H (18 >> 2)
-#define NAND_T_PUL (30 >> 2)
-#define NAND_T_SU (30 >> 2)
-#define NAND_T_WH (30 >> 2)
+#define NAND_T_H (18 >> 2)
+#define NAND_T_PUL (30 >> 2)
+#define NAND_T_SU (30 >> 2)
+#define NAND_T_WH (30 >> 2)
/* Bitfield shift amounts */
#define NAND_T_H_SHIFT 0
@@ -211,11 +203,10 @@
#define NAND_T_SU_SHIFT 8
#define NAND_T_WH_SHIFT 12
-#define NAND_TIMING ((NAND_T_H & 0xF) << NAND_T_H_SHIFT) | \
- ((NAND_T_PUL & 0xF) << NAND_T_PUL_SHIFT) | \
- ((NAND_T_SU & 0xF) << NAND_T_SU_SHIFT) | \
- ((NAND_T_WH & 0xF) << NAND_T_WH_SHIFT)
-
+#define NAND_TIMING (((NAND_T_H & 0xF) << NAND_T_H_SHIFT) | \
+ ((NAND_T_PUL & 0xF) << NAND_T_PUL_SHIFT) | \
+ ((NAND_T_SU & 0xF) << NAND_T_SU_SHIFT) | \
+ ((NAND_T_WH & 0xF) << NAND_T_WH_SHIFT))
/*
* External Interrupts for Pb1200 as of 8/6/2004.
@@ -248,13 +239,21 @@
PB1200_INT_END = PB1200_INT_BEGIN + 15
};
-/* For drivers/pcmcia/au1000_db1x00.c */
-#define BOARD_PC0_INT PB1200_PC0_INT
-#define BOARD_PC1_INT PB1200_PC1_INT
-#define BOARD_CARD_INSERTED(SOCKET) bcsr->sig_status & (1<<(8+(2*SOCKET)))
+/*
+ * Pb1200 specific PCMCIA defines for drivers/pcmcia/au1000_db1x00.c
+ */
+#define PCMCIA_MAX_SOCK 1
+#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)
-/* Nand chip select */
+/* VPP/VCC */
+#define SET_VCC_VPP(VCC, VPP, SLOT) \
+ ((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8))
+
+#define BOARD_PC0_INT PB1200_PC0_INT
+#define BOARD_PC1_INT PB1200_PC1_INT
+#define BOARD_CARD_INSERTED(SOCKET) bcsr->sig_status & (1 << (8 + (2 * SOCKET)))
+
+/* NAND chip select */
#define NAND_CS 1
#endif /* __ASM_PB1200_H */
-
diff --git a/include/asm-mips/mach-pb1x00/pb1500.h b/include/asm-mips/mach-pb1x00/pb1500.h
index ff6d40c..da51a2e 100644
--- a/include/asm-mips/mach-pb1x00/pb1500.h
+++ b/include/asm-mips/mach-pb1x00/pb1500.h
@@ -1,9 +1,8 @@
/*
- * Alchemy Semi PB1500 Referrence Board
+ * Alchemy Semi Pb1500 Referrence Board
*
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * ppopov@mvista.com or source@mvista.com
+ * Copyright 2001, 2008 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc. <source@mvista.com>
*
* ########################################################################
*
@@ -27,25 +26,24 @@
#ifndef __ASM_PB1500_H
#define __ASM_PB1500_H
+#define IDENT_BOARD_REG 0xAE000000
+#define BOARD_STATUS_REG 0xAE000004
+#define PCI_BOARD_REG 0xAE000010
+#define PCMCIA_BOARD_REG 0xAE000010
+# define PC_DEASSERT_RST 0x80
+# define PC_DRV_EN 0x10
+#define PB1500_G_CONTROL 0xAE000014
+#define PB1500_RST_VDDI 0xAE00001C
+#define PB1500_LEDS 0xAE000018
-#define IDENT_BOARD_REG 0xAE000000
-#define BOARD_STATUS_REG 0xAE000004
-#define PCI_BOARD_REG 0xAE000010
-#define PCMCIA_BOARD_REG 0xAE000010
- #define PC_DEASSERT_RST 0x80
- #define PC_DRV_EN 0x10
-#define PB1500_G_CONTROL 0xAE000014
-#define PB1500_RST_VDDI 0xAE00001C
-#define PB1500_LEDS 0xAE000018
+#define PB1500_HEX_LED 0xAF000004
+#define PB1500_HEX_LED_BLANK 0xAF000008
-#define PB1500_HEX_LED 0xAF000004
-#define PB1500_HEX_LED_BLANK 0xAF000008
-
-/* PCMCIA PB1500 specific defines */
-#define PCMCIA_MAX_SOCK 0
-#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK+1)
+/* PCMCIA Pb1500 specific defines */
+#define PCMCIA_MAX_SOCK 0
+#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)
/* VPP/VCC */
-#define SET_VCC_VPP(VCC, VPP) (((VCC)<<2) | ((VPP)<<0))
+#define SET_VCC_VPP(VCC, VPP) (((VCC) << 2) | ((VPP) << 0))
#endif /* __ASM_PB1500_H */
diff --git a/include/asm-mips/mach-pb1x00/pb1550.h b/include/asm-mips/mach-pb1x00/pb1550.h
index c2ab0e2..6704a11 100644
--- a/include/asm-mips/mach-pb1x00/pb1550.h
+++ b/include/asm-mips/mach-pb1x00/pb1550.h
@@ -30,15 +30,15 @@
#include <linux/types.h>
#include <asm/mach-au1x00/au1xxx_psc.h>
-#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX
-#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX
-#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC3_TX
-#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC3_RX
+#define DBDMA_AC97_TX_CHAN DSCR_CMD0_PSC1_TX
+#define DBDMA_AC97_RX_CHAN DSCR_CMD0_PSC1_RX
+#define DBDMA_I2S_TX_CHAN DSCR_CMD0_PSC3_TX
+#define DBDMA_I2S_RX_CHAN DSCR_CMD0_PSC3_RX
-#define SPI_PSC_BASE PSC0_BASE_ADDR
-#define AC97_PSC_BASE PSC1_BASE_ADDR
-#define SMBUS_PSC_BASE PSC2_BASE_ADDR
-#define I2S_PSC_BASE PSC3_BASE_ADDR
+#define SPI_PSC_BASE PSC0_BASE_ADDR
+#define AC97_PSC_BASE PSC1_BASE_ADDR
+#define SMBUS_PSC_BASE PSC2_BASE_ADDR
+#define I2S_PSC_BASE PSC3_BASE_ADDR
#define BCSR_PHYS_ADDR 0xAF000000
@@ -129,12 +129,12 @@
#define BCSR_SYSTEM_POWEROFF 0x4000
#define BCSR_SYSTEM_RESET 0x8000
-#define PCMCIA_MAX_SOCK 1
-#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK+1)
+#define PCMCIA_MAX_SOCK 1
+#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1)
/* VPP/VCC */
-#define SET_VCC_VPP(VCC, VPP, SLOT)\
- ((((VCC)<<2) | ((VPP)<<0)) << ((SLOT)*8))
+#define SET_VCC_VPP(VCC, VPP, SLOT) \
+ ((((VCC) << 2) | ((VPP) << 0)) << ((SLOT) * 8))
#if defined(CONFIG_MTD_PB1550_BOOT) && defined(CONFIG_MTD_PB1550_USER)
#define PB1550_BOTH_BANKS
@@ -144,16 +144,17 @@
#define PB1550_USER_ONLY
#endif
-/* Timing values as described in databook, * ns value stripped of
+/*
+ * Timing values as described in databook, * ns value stripped of
* lower 2 bits.
* These defines are here rather than an SOC1550 generic file because
* the parts chosen on another board may be different and may require
* different timings.
*/
-#define NAND_T_H (18 >> 2)
-#define NAND_T_PUL (30 >> 2)
-#define NAND_T_SU (30 >> 2)
-#define NAND_T_WH (30 >> 2)
+#define NAND_T_H (18 >> 2)
+#define NAND_T_PUL (30 >> 2)
+#define NAND_T_SU (30 >> 2)
+#define NAND_T_WH (30 >> 2)
/* Bitfield shift amounts */
#define NAND_T_H_SHIFT 0
@@ -161,16 +162,16 @@
#define NAND_T_SU_SHIFT 8
#define NAND_T_WH_SHIFT 12
-#define NAND_TIMING ((NAND_T_H & 0xF) << NAND_T_H_SHIFT) | \
- ((NAND_T_PUL & 0xF) << NAND_T_PUL_SHIFT) | \
- ((NAND_T_SU & 0xF) << NAND_T_SU_SHIFT) | \
- ((NAND_T_WH & 0xF) << NAND_T_WH_SHIFT)
+#define NAND_TIMING (((NAND_T_H & 0xF) << NAND_T_H_SHIFT) | \
+ ((NAND_T_PUL & 0xF) << NAND_T_PUL_SHIFT) | \
+ ((NAND_T_SU & 0xF) << NAND_T_SU_SHIFT) | \
+ ((NAND_T_WH & 0xF) << NAND_T_WH_SHIFT))
#define NAND_CS 1
-/* should be done by yamon */
-#define NAND_STCFG 0x00400005 /* 8-bit NAND */
-#define NAND_STTIME 0x00007774 /* valid for 396MHz SD=2 only */
-#define NAND_STADDR 0x12000FFF /* physical address 0x20000000 */
+/* Should be done by YAMON */
+#define NAND_STCFG 0x00400005 /* 8-bit NAND */
+#define NAND_STTIME 0x00007774 /* valid for 396 MHz SD=2 only */
+#define NAND_STADDR 0x12000FFF /* physical address 0x20000000 */
#endif /* __ASM_PB1550_H */
diff --git a/include/asm-mips/mipsregs.h b/include/asm-mips/mipsregs.h
index aa17f65..a46f8e2 100644
--- a/include/asm-mips/mipsregs.h
+++ b/include/asm-mips/mipsregs.h
@@ -765,6 +765,9 @@
#define read_c0_index() __read_32bit_c0_register($0, 0)
#define write_c0_index(val) __write_32bit_c0_register($0, 0, val)
+#define read_c0_random() __read_32bit_c0_register($1, 0)
+#define write_c0_random(val) __write_32bit_c0_register($1, 0, val)
+
#define read_c0_entrylo0() __read_ulong_c0_register($2, 0)
#define write_c0_entrylo0(val) __write_ulong_c0_register($2, 0, val)
diff --git a/include/asm-mips/pgtable.h b/include/asm-mips/pgtable.h
index 2f597ee..6a0edf7 100644
--- a/include/asm-mips/pgtable.h
+++ b/include/asm-mips/pgtable.h
@@ -239,9 +239,10 @@
static inline pte_t pte_mkyoung(pte_t pte)
{
pte.pte_low |= _PAGE_ACCESSED;
- if (pte.pte_low & _PAGE_READ)
+ if (pte.pte_low & _PAGE_READ) {
pte.pte_low |= _PAGE_SILENT_READ;
pte.pte_high |= _PAGE_SILENT_READ;
+ }
return pte;
}
#else
diff --git a/include/asm-mips/rtlx.h b/include/asm-mips/rtlx.h
index 65778c8..4ca3063 100644
--- a/include/asm-mips/rtlx.h
+++ b/include/asm-mips/rtlx.h
@@ -3,7 +3,7 @@
*
*/
-#ifndef __ASM_RTLX_H
+#ifndef __ASM_RTLX_H_
#define __ASM_RTLX_H_
#include <irq.h>
@@ -29,13 +29,13 @@
extern unsigned int rtlx_write_poll(int index);
enum rtlx_state {
- RTLX_STATE_UNUSED,
+ RTLX_STATE_UNUSED = 0,
RTLX_STATE_INITIALISED,
RTLX_STATE_REMOTE_READY,
RTLX_STATE_OPENED
};
-#define RTLX_BUFFER_SIZE 1024
+#define RTLX_BUFFER_SIZE 2048
/* each channel supports read and write.
linux (vpe0) reads lx_buffer and writes rt_buffer
diff --git a/include/asm-mn10300/ipcbuf.h b/include/asm-mn10300/ipcbuf.h
index efbbef8..f6f63d4 100644
--- a/include/asm-mn10300/ipcbuf.h
+++ b/include/asm-mn10300/ipcbuf.h
@@ -1,4 +1,4 @@
-#ifndef _ASM_IPCBUF_H_
+#ifndef _ASM_IPCBUF_H
#define _ASM_IPCBUF_H
/*
diff --git a/include/asm-parisc/assembly.h b/include/asm-parisc/assembly.h
index 5587f00..ffb2088 100644
--- a/include/asm-parisc/assembly.h
+++ b/include/asm-parisc/assembly.h
@@ -31,9 +31,8 @@
#define STREGM std,ma
#define SHRREG shrd
#define SHLREG shld
-#define ADDIB addib,*
-#define CMPB cmpb,*
#define ANDCM andcm,*
+#define COND(x) * ## x
#define RP_OFFSET 16
#define FRAME_SIZE 128
#define CALLEE_REG_FRAME_SIZE 144
@@ -46,9 +45,8 @@
#define STREGM stwm
#define SHRREG shr
#define SHLREG shlw
-#define ADDIB addib,
-#define CMPB cmpb,
#define ANDCM andcm
+#define COND(x) x
#define RP_OFFSET 20
#define FRAME_SIZE 64
#define CALLEE_REG_FRAME_SIZE 128
diff --git a/include/asm-parisc/checksum.h b/include/asm-parisc/checksum.h
index cc3ec1b..e9639cc 100644
--- a/include/asm-parisc/checksum.h
+++ b/include/asm-parisc/checksum.h
@@ -65,7 +65,7 @@
"2:\n"
: "=r" (sum), "=r" (iph), "=r" (ihl)
: "1" (iph), "2" (ihl)
- : "r19", "r20", "r21" );
+ : "r19", "r20", "r21", "memory");
return (__force __sum16)sum;
}
diff --git a/include/asm-parisc/ioctl.h b/include/asm-parisc/ioctl.h
index 68338d2..ec8efa0 100644
--- a/include/asm-parisc/ioctl.h
+++ b/include/asm-parisc/ioctl.h
@@ -32,21 +32,6 @@
* NOTE: This limits the max parameter size to 16kB -1 !
*/
-#define _IOC_NRBITS 8
-#define _IOC_TYPEBITS 8
-#define _IOC_SIZEBITS 14
-#define _IOC_DIRBITS 2
-
-#define _IOC_NRMASK ((1 << _IOC_NRBITS)-1)
-#define _IOC_TYPEMASK ((1 << _IOC_TYPEBITS)-1)
-#define _IOC_SIZEMASK ((1 << _IOC_SIZEBITS)-1)
-#define _IOC_DIRMASK ((1 << _IOC_DIRBITS)-1)
-
-#define _IOC_NRSHIFT 0
-#define _IOC_TYPESHIFT (_IOC_NRSHIFT+_IOC_NRBITS)
-#define _IOC_SIZESHIFT (_IOC_TYPESHIFT+_IOC_TYPEBITS)
-#define _IOC_DIRSHIFT (_IOC_SIZESHIFT+_IOC_SIZEBITS)
-
/*
* Direction bits.
*/
@@ -54,40 +39,6 @@
#define _IOC_WRITE 2U
#define _IOC_READ 1U
-#define _IOC(dir,type,nr,size) \
- (((dir) << _IOC_DIRSHIFT) | \
- ((type) << _IOC_TYPESHIFT) | \
- ((nr) << _IOC_NRSHIFT) | \
- ((size) << _IOC_SIZESHIFT))
-
-/* provoke compile error for invalid uses of size argument */
-extern unsigned int __invalid_size_argument_for_IOC;
-#define _IOC_TYPECHECK(t) \
- ((sizeof(t) == sizeof(t[1]) && \
- sizeof(t) < (1 << _IOC_SIZEBITS)) ? \
- sizeof(t) : __invalid_size_argument_for_IOC)
-
-/* used to create numbers */
-#define _IO(type,nr) _IOC(_IOC_NONE,(type),(nr),0)
-#define _IOR(type,nr,size) _IOC(_IOC_READ,(type),(nr),(_IOC_TYPECHECK(size)))
-#define _IOW(type,nr,size) _IOC(_IOC_WRITE,(type),(nr),(_IOC_TYPECHECK(size)))
-#define _IOWR(type,nr,size) _IOC(_IOC_READ|_IOC_WRITE,(type),(nr),(_IOC_TYPECHECK(size)))
-#define _IOR_BAD(type,nr,size) _IOC(_IOC_READ,(type),(nr),sizeof(size))
-#define _IOW_BAD(type,nr,size) _IOC(_IOC_WRITE,(type),(nr),sizeof(size))
-#define _IOWR_BAD(type,nr,size) _IOC(_IOC_READ|_IOC_WRITE,(type),(nr),sizeof(size))
-
-/* used to decode ioctl numbers.. */
-#define _IOC_DIR(nr) (((nr) >> _IOC_DIRSHIFT) & _IOC_DIRMASK)
-#define _IOC_TYPE(nr) (((nr) >> _IOC_TYPESHIFT) & _IOC_TYPEMASK)
-#define _IOC_NR(nr) (((nr) >> _IOC_NRSHIFT) & _IOC_NRMASK)
-#define _IOC_SIZE(nr) (((nr) >> _IOC_SIZESHIFT) & _IOC_SIZEMASK)
-
-/* ...and for the drivers/sound files... */
-
-#define IOC_IN (_IOC_WRITE << _IOC_DIRSHIFT)
-#define IOC_OUT (_IOC_READ << _IOC_DIRSHIFT)
-#define IOC_INOUT ((_IOC_WRITE|_IOC_READ) << _IOC_DIRSHIFT)
-#define IOCSIZE_MASK (_IOC_SIZEMASK << _IOC_SIZESHIFT)
-#define IOCSIZE_SHIFT (_IOC_SIZESHIFT)
+#include <asm-generic/ioctl.h>
#endif /* _ASM_PARISC_IOCTL_H */
diff --git a/include/asm-parisc/ioctls.h b/include/asm-parisc/ioctls.h
index ee84e41..6747fad 100644
--- a/include/asm-parisc/ioctls.h
+++ b/include/asm-parisc/ioctls.h
@@ -46,6 +46,10 @@
#define TIOCSBRK 0x5427 /* BSD compatibility */
#define TIOCCBRK 0x5428 /* BSD compatibility */
#define TIOCGSID _IOR('T', 20, int) /* Return the session ID of FD */
+#define TCGETS2 _IOR('T',0x2A, struct termios2)
+#define TCSETS2 _IOW('T',0x2B, struct termios2)
+#define TCSETSW2 _IOW('T',0x2C, struct termios2)
+#define TCSETSF2 _IOW('T',0x2D, struct termios2)
#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */
diff --git a/include/asm-parisc/termbits.h b/include/asm-parisc/termbits.h
index e847fe9..d8bbc73 100644
--- a/include/asm-parisc/termbits.h
+++ b/include/asm-parisc/termbits.h
@@ -141,6 +141,7 @@
#define HUPCL 0002000
#define CLOCAL 0004000
#define CBAUDEX 0010000
+#define BOTHER 0010000
#define B57600 0010001
#define B115200 0010002
#define B230400 0010003
@@ -156,10 +157,12 @@
#define B3000000 0010015
#define B3500000 0010016
#define B4000000 0010017
-#define CIBAUD 002003600000 /* input baud rate (not used) */
+#define CIBAUD 002003600000 /* input baud rate */
#define CMSPAR 010000000000 /* mark or space (stick) parity */
#define CRTSCTS 020000000000 /* flow control */
+#define IBSHIFT 16 /* Shift from CBAUD to CIBAUD */
+
/* c_lflag bits */
#define ISIG 0000001
diff --git a/include/asm-parisc/termios.h b/include/asm-parisc/termios.h
index 5345b34..a2a57a4 100644
--- a/include/asm-parisc/termios.h
+++ b/include/asm-parisc/termios.h
@@ -80,8 +80,10 @@
copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \
})
-#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios))
-#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios))
+#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2))
+#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2))
+#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios))
+#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios))
#endif /* __KERNEL__ */
diff --git a/include/asm-powerpc/io.h b/include/asm-powerpc/io.h
index e0062d7..8918948 100644
--- a/include/asm-powerpc/io.h
+++ b/include/asm-powerpc/io.h
@@ -100,7 +100,7 @@
{ \
type ret; \
__asm__ __volatile__("sync;" insn ";twi 0,%0,0;isync" \
- : "=r" (ret) : "r" (addr), "m" (*addr)); \
+ : "=r" (ret) : "r" (addr), "m" (*addr) : "memory"); \
return ret; \
}
@@ -108,8 +108,8 @@
static inline void name(volatile type __iomem *addr, type val) \
{ \
__asm__ __volatile__("sync;" insn \
- : "=m" (*addr) : "r" (val), "r" (addr)); \
- IO_SET_SYNC_FLAG(); \
+ : "=m" (*addr) : "r" (val), "r" (addr) : "memory"); \
+ IO_SET_SYNC_FLAG(); \
}
@@ -333,7 +333,8 @@
" .long 3b,5b\n" \
".previous" \
: "=&r" (x) \
- : "r" (port + _IO_BASE)); \
+ : "r" (port + _IO_BASE) \
+ : "memory"); \
return x; \
}
@@ -350,7 +351,8 @@
" .long 0b,2b\n" \
" .long 1b,2b\n" \
".previous" \
- : : "r" (val), "r" (port + _IO_BASE)); \
+ : : "r" (val), "r" (port + _IO_BASE) \
+ : "memory"); \
}
__do_in_asm(_rec_inb, "lbzx")
diff --git a/include/asm-powerpc/kvm_ppc.h b/include/asm-powerpc/kvm_ppc.h
index b35a7e3..5a21115 100644
--- a/include/asm-powerpc/kvm_ppc.h
+++ b/include/asm-powerpc/kvm_ppc.h
@@ -57,6 +57,7 @@
extern int kvmppc_emulate_instruction(struct kvm_run *run,
struct kvm_vcpu *vcpu);
+extern int kvmppc_emulate_mmio(struct kvm_run *run, struct kvm_vcpu *vcpu);
extern void kvmppc_mmu_map(struct kvm_vcpu *vcpu, u64 gvaddr, gfn_t gfn,
u64 asid, u32 flags);
diff --git a/include/asm-powerpc/mmu-hash64.h b/include/asm-powerpc/mmu-hash64.h
index 0dff767..39c5c5f 100644
--- a/include/asm-powerpc/mmu-hash64.h
+++ b/include/asm-powerpc/mmu-hash64.h
@@ -177,6 +177,7 @@
extern int mmu_linear_psize;
extern int mmu_virtual_psize;
extern int mmu_vmalloc_psize;
+extern int mmu_vmemmap_psize;
extern int mmu_io_psize;
extern int mmu_kernel_ssize;
extern int mmu_highuser_ssize;
diff --git a/include/asm-powerpc/mpic.h b/include/asm-powerpc/mpic.h
index 943c5a3..a4d0f87 100644
--- a/include/asm-powerpc/mpic.h
+++ b/include/asm-powerpc/mpic.h
@@ -428,12 +428,11 @@
*/
-/* Change/Read the priority of an interrupt. Default is 8 for irqs and
+/* Change the priority of an interrupt. Default is 8 for irqs and
* 10 for IPIs. You can call this on both IPIs and IRQ numbers, but the
* IPI number is then the offset'ed (linux irq number mapped to the IPI)
*/
extern void mpic_irq_set_priority(unsigned int irq, unsigned int pri);
-extern unsigned int mpic_irq_get_priority(unsigned int irq);
/* Setup a non-boot CPU */
extern void mpic_setup_this_cpu(void);
diff --git a/include/asm-powerpc/pgtable-ppc64.h b/include/asm-powerpc/pgtable-ppc64.h
index 27f1869..cc6a43b 100644
--- a/include/asm-powerpc/pgtable-ppc64.h
+++ b/include/asm-powerpc/pgtable-ppc64.h
@@ -65,15 +65,15 @@
#define VMALLOC_REGION_ID (REGION_ID(VMALLOC_START))
#define KERNEL_REGION_ID (REGION_ID(PAGE_OFFSET))
+#define VMEMMAP_REGION_ID (0xfUL)
#define USER_REGION_ID (0UL)
/*
- * Defines the address of the vmemap area, in the top 16th of the
- * kernel region.
+ * Defines the address of the vmemap area, in its own region
*/
-#define VMEMMAP_BASE (ASM_CONST(CONFIG_KERNEL_START) + \
- (0xfUL << (REGION_SHIFT - 4)))
-#define vmemmap ((struct page *)VMEMMAP_BASE)
+#define VMEMMAP_BASE (VMEMMAP_REGION_ID << REGION_SHIFT)
+#define vmemmap ((struct page *)VMEMMAP_BASE)
+
/*
* Common bits in a linux-style PTE. These match the bits in the
diff --git a/include/asm-powerpc/uaccess.h b/include/asm-powerpc/uaccess.h
index 8e798e3..1a0736f 100644
--- a/include/asm-powerpc/uaccess.h
+++ b/include/asm-powerpc/uaccess.h
@@ -380,7 +380,7 @@
const void __user *from, unsigned long n)
{
if (__builtin_constant_p(n) && (n <= 8)) {
- unsigned long ret;
+ unsigned long ret = 1;
switch (n) {
case 1:
@@ -406,7 +406,7 @@
const void *from, unsigned long n)
{
if (__builtin_constant_p(n) && (n <= 8)) {
- unsigned long ret;
+ unsigned long ret = 1;
switch (n) {
case 1:
diff --git a/include/asm-ppc/system.h b/include/asm-ppc/system.h
index 0593cb8..70ebd33 100644
--- a/include/asm-ppc/system.h
+++ b/include/asm-ppc/system.h
@@ -178,7 +178,7 @@
}
-extern inline void * xchg_ptr(void * m, void * val)
+static inline void * xchg_ptr(void * m, void * val)
{
return (void *) xchg_u32(m, (unsigned long) val);
}
diff --git a/include/asm-s390/debug.h b/include/asm-s390/debug.h
index 335baf4..9450ce6 100644
--- a/include/asm-s390/debug.h
+++ b/include/asm-s390/debug.h
@@ -120,10 +120,10 @@
/* Debug Feature API: */
-debug_info_t* debug_register(char* name, int pages, int nr_areas,
+debug_info_t *debug_register(const char *name, int pages, int nr_areas,
int buf_size);
-debug_info_t *debug_register_mode(char *name, int pages, int nr_areas,
+debug_info_t *debug_register_mode(const char *name, int pages, int nr_areas,
int buf_size, mode_t mode, uid_t uid,
gid_t gid);
diff --git a/include/asm-s390/system.h b/include/asm-s390/system.h
index e0d4500..819e7d9 100644
--- a/include/asm-s390/system.h
+++ b/include/asm-s390/system.h
@@ -315,14 +315,14 @@
asm volatile( \
" lctlg %1,%2,0(%0)\n" \
: : "a" (&array), "i" (low), "i" (high), \
- "m" (*(addrtype *)(array))); \
+ "m" (*(addrtype *)(&array))); \
})
#define __ctl_store(array, low, high) ({ \
typedef struct { char _[sizeof(array)]; } addrtype; \
asm volatile( \
" stctg %2,%3,0(%1)\n" \
- : "=m" (*(addrtype *)(array)) \
+ : "=m" (*(addrtype *)(&array)) \
: "a" (&array), "i" (low), "i" (high)); \
})
@@ -333,14 +333,14 @@
asm volatile( \
" lctl %1,%2,0(%0)\n" \
: : "a" (&array), "i" (low), "i" (high), \
- "m" (*(addrtype *)(array))); \
+ "m" (*(addrtype *)(&array))); \
})
#define __ctl_store(array, low, high) ({ \
typedef struct { char _[sizeof(array)]; } addrtype; \
asm volatile( \
" stctl %2,%3,0(%1)\n" \
- : "=m" (*(addrtype *)(array)) \
+ : "=m" (*(addrtype *)(&array)) \
: "a" (&array), "i" (low), "i" (high)); \
})
diff --git a/include/asm-s390/types.h b/include/asm-s390/types.h
index 78dda03..41c5476 100644
--- a/include/asm-s390/types.h
+++ b/include/asm-s390/types.h
@@ -10,9 +10,9 @@
#define _S390_TYPES_H
#ifndef __s390x__
-# include <asm-generic/int-l64.h>
-#else
# include <asm-generic/int-ll64.h>
+#else
+# include <asm-generic/int-l64.h>
#endif
#ifndef __ASSEMBLY__
@@ -40,7 +40,13 @@
#ifndef __ASSEMBLY__
+typedef u64 dma64_addr_t;
+#ifdef __s390x__
+/* DMA addresses come in 32-bit and 64-bit flavours. */
+typedef u64 dma_addr_t;
+#else
typedef u32 dma_addr_t;
+#endif
#ifndef __s390x__
typedef union {
diff --git a/include/asm-sh/checksum_32.h b/include/asm-sh/checksum_32.h
index 4bc8357..14b7ac2 100644
--- a/include/asm-sh/checksum_32.h
+++ b/include/asm-sh/checksum_32.h
@@ -109,7 +109,7 @@
will assume they contain their original values. */
: "=r" (sum), "=r" (iph), "=r" (ihl), "=&r" (__dummy0), "=&z" (__dummy1)
: "1" (iph), "2" (ihl)
- : "t");
+ : "t", "memory");
return csum_fold(sum);
}
diff --git a/include/asm-sh/kgdb.h b/include/asm-sh/kgdb.h
index 4bc8cb1..24e4207 100644
--- a/include/asm-sh/kgdb.h
+++ b/include/asm-sh/kgdb.h
@@ -66,18 +66,4 @@
/* Forced breakpoint */
#define breakpoint() __asm__ __volatile__("trapa #0x3c")
-/* Taken from sh-stub.c of GDB 4.18 */
-static const char hexchars[] = "0123456789abcdef";
-
-/* Get high hex bits */
-static inline char highhex(const int x)
-{
- return hexchars[(x >> 4) & 0xf];
-}
-
-/* Get low hex bits */
-static inline char lowhex(const int x)
-{
- return hexchars[x & 0xf];
-}
#endif
diff --git a/include/asm-sparc/asi.h b/include/asm-sparc/asi.h
index 58c3754..158f9b0 100644
--- a/include/asm-sparc/asi.h
+++ b/include/asm-sparc/asi.h
@@ -1,4 +1,3 @@
-/* $Id: asi.h,v 1.18 1998/03/09 14:04:46 jj Exp $ */
#ifndef _SPARC_ASI_H
#define _SPARC_ASI_H
diff --git a/include/asm-sparc/auxio.h b/include/asm-sparc/auxio.h
index ee83aef..e552b8d 100644
--- a/include/asm-sparc/auxio.h
+++ b/include/asm-sparc/auxio.h
@@ -1,4 +1,4 @@
-/* $Id: auxio.h,v 1.18 1997/11/07 15:01:45 jj Exp $
+/*
* auxio.h: Definitions and code for the Auxiliary I/O register.
*
* Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
diff --git a/include/asm-sparc/bitops.h b/include/asm-sparc/bitops.h
index cb3cefa..68b98a7e 100644
--- a/include/asm-sparc/bitops.h
+++ b/include/asm-sparc/bitops.h
@@ -1,4 +1,4 @@
-/* $Id: bitops.h,v 1.67 2001/11/19 18:36:34 davem Exp $
+/*
* bitops.h: Bit string operations on the Sparc.
*
* Copyright 1995 David S. Miller (davem@caip.rutgers.edu)
diff --git a/include/asm-sparc/btfixup.h b/include/asm-sparc/btfixup.h
index c2868d0..08277e6 100644
--- a/include/asm-sparc/btfixup.h
+++ b/include/asm-sparc/btfixup.h
@@ -1,4 +1,4 @@
-/* $Id: btfixup.h,v 1.4 1998/03/09 14:04:43 jj Exp $
+/*
* asm-sparc/btfixup.h: Macros for boot time linking.
*
* Copyright (C) 1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
diff --git a/include/asm-sparc/checksum.h b/include/asm-sparc/checksum.h
index 34518ea..d044ddb 100644
--- a/include/asm-sparc/checksum.h
+++ b/include/asm-sparc/checksum.h
@@ -1,4 +1,3 @@
-/* $Id: checksum.h,v 1.33 2002/02/01 22:01:05 davem Exp $ */
#ifndef __SPARC_CHECKSUM_H
#define __SPARC_CHECKSUM_H
diff --git a/include/asm-sparc/clock.h b/include/asm-sparc/clock.h
index e708e6b..2cf99da 100644
--- a/include/asm-sparc/clock.h
+++ b/include/asm-sparc/clock.h
@@ -1,4 +1,4 @@
-/* $Id: clock.h,v 1.3 1995/11/25 02:31:25 davem Exp $
+/*
* clock.h: Definitions for clock operations on the Sparc.
*
* Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
diff --git a/include/asm-sparc/contregs.h b/include/asm-sparc/contregs.h
index 0e05afe..48fa8a4 100644
--- a/include/asm-sparc/contregs.h
+++ b/include/asm-sparc/contregs.h
@@ -1,4 +1,3 @@
-/* $Id: contregs.h,v 1.8 2000/12/28 22:49:11 davem Exp $ */
#ifndef _SPARC_CONTREGS_H
#define _SPARC_CONTREGS_H
diff --git a/include/asm-sparc/cypress.h b/include/asm-sparc/cypress.h
index 99599533..95e9772 100644
--- a/include/asm-sparc/cypress.h
+++ b/include/asm-sparc/cypress.h
@@ -1,4 +1,4 @@
-/* $Id: cypress.h,v 1.6 1996/08/29 09:48:09 davem Exp $
+/*
* cypress.h: Cypress module specific definitions and defines.
*
* Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
diff --git a/include/asm-sparc/delay.h b/include/asm-sparc/delay.h
index 48aa70e..bc9aba2 100644
--- a/include/asm-sparc/delay.h
+++ b/include/asm-sparc/delay.h
@@ -1,4 +1,4 @@
-/* $Id: delay.h,v 1.11 2001/01/01 01:46:15 davem Exp $
+/*
* delay.h: Linux delay routines on the Sparc.
*
* Copyright (C) 1994 David S. Miller (davem@caip.rutgers.edu).
diff --git a/include/asm-sparc/ebus.h b/include/asm-sparc/ebus.h
index 5465288..491f85d 100644
--- a/include/asm-sparc/ebus.h
+++ b/include/asm-sparc/ebus.h
@@ -1,4 +1,4 @@
-/* $Id: ebus.h,v 1.2 1999/09/11 23:05:55 zaitcev Exp $
+/*
* ebus.h: PCI to Ebus pseudo driver software state.
*
* Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be)
diff --git a/include/asm-sparc/ecc.h b/include/asm-sparc/ecc.h
index 8e27cec..ccb84b6 100644
--- a/include/asm-sparc/ecc.h
+++ b/include/asm-sparc/ecc.h
@@ -1,4 +1,4 @@
-/* $Id: ecc.h,v 1.3 1996/04/25 06:12:57 davem Exp $
+/*
* ecc.h: Definitions and defines for the external cache/memory
* controller on the sun4m.
*
diff --git a/include/asm-sparc/eeprom.h b/include/asm-sparc/eeprom.h
index a8ff749..e17beec 100644
--- a/include/asm-sparc/eeprom.h
+++ b/include/asm-sparc/eeprom.h
@@ -1,4 +1,4 @@
-/* $Id: eeprom.h,v 1.3 1995/11/25 02:31:38 davem Exp $
+/*
* eeprom.h: Definitions for the Sun eeprom.
*
* Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
diff --git a/include/asm-sparc/elf.h b/include/asm-sparc/elf.h
index d2516ee..d043f80 100644
--- a/include/asm-sparc/elf.h
+++ b/include/asm-sparc/elf.h
@@ -1,4 +1,3 @@
-/* $Id: elf.h,v 1.22 2000/07/12 01:27:08 davem Exp $ */
#ifndef __ASMSPARC_ELF_H
#define __ASMSPARC_ELF_H
diff --git a/include/asm-sparc/fcntl.h b/include/asm-sparc/fcntl.h
index 5ec5463..07bd2d8 100644
--- a/include/asm-sparc/fcntl.h
+++ b/include/asm-sparc/fcntl.h
@@ -1,4 +1,3 @@
-/* $Id: fcntl.h,v 1.16 2001/09/20 00:35:33 davem Exp $ */
#ifndef _SPARC_FCNTL_H
#define _SPARC_FCNTL_H
diff --git a/include/asm-sparc/head.h b/include/asm-sparc/head.h
index e6532c3..7c35491 100644
--- a/include/asm-sparc/head.h
+++ b/include/asm-sparc/head.h
@@ -1,4 +1,3 @@
-/* $Id: head.h,v 1.39 2000/05/26 22:18:45 ecd Exp $ */
#ifndef __SPARC_HEAD_H
#define __SPARC_HEAD_H
diff --git a/include/asm-sparc/idprom.h b/include/asm-sparc/idprom.h
index 59083ed..41adb41 100644
--- a/include/asm-sparc/idprom.h
+++ b/include/asm-sparc/idprom.h
@@ -1,4 +1,4 @@
-/* $Id: idprom.h,v 1.6 1996/08/04 10:35:07 ecd Exp $
+/*
* idprom.h: Macros and defines for idprom routines
*
* Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
diff --git a/include/asm-sparc/io.h b/include/asm-sparc/io.h
index 243bf8e..3a3e7bd 100644
--- a/include/asm-sparc/io.h
+++ b/include/asm-sparc/io.h
@@ -1,6 +1,3 @@
-/*
- * $Id: io.h,v 1.30 2001/12/21 01:23:21 davem Exp $
- */
#ifndef __SPARC_IO_H
#define __SPARC_IO_H
diff --git a/include/asm-sparc/ioctl.h b/include/asm-sparc/ioctl.h
index e6fc4de..7d6bd51 100644
--- a/include/asm-sparc/ioctl.h
+++ b/include/asm-sparc/ioctl.h
@@ -1,4 +1,3 @@
-/* $Id: ioctl.h,v 1.6 1999/12/01 23:58:36 davem Exp $ */
#ifndef _SPARC_IOCTL_H
#define _SPARC_IOCTL_H
diff --git a/include/asm-sparc/kdebug.h b/include/asm-sparc/kdebug.h
index 631f15f..f69fe7d 100644
--- a/include/asm-sparc/kdebug.h
+++ b/include/asm-sparc/kdebug.h
@@ -1,4 +1,4 @@
-/* $Id: kdebug.h,v 1.11 2000/06/04 06:23:53 anton Exp $
+/*
* kdebug.h: Defines and definitions for debugging the Linux kernel
* under various kernel debuggers.
*
diff --git a/include/asm-sparc/machines.h b/include/asm-sparc/machines.h
index d831350..d6c6bf8 100644
--- a/include/asm-sparc/machines.h
+++ b/include/asm-sparc/machines.h
@@ -1,4 +1,4 @@
-/* $Id: machines.h,v 1.4 1995/11/25 02:31:58 davem Exp $
+/*
* machines.h: Defines for taking apart the machine type value in the
* idprom and determining the kind of machine we are on.
*
diff --git a/include/asm-sparc/mbus.h b/include/asm-sparc/mbus.h
index ecacdf4..bb5ae61 100644
--- a/include/asm-sparc/mbus.h
+++ b/include/asm-sparc/mbus.h
@@ -1,4 +1,4 @@
-/* $Id: mbus.h,v 1.9 1997/06/24 15:48:12 jj Exp $
+/*
* mbus.h: Various defines for MBUS modules.
*
* Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
diff --git a/include/asm-sparc/memreg.h b/include/asm-sparc/memreg.h
index 5fb95c8..845ad2b 100644
--- a/include/asm-sparc/memreg.h
+++ b/include/asm-sparc/memreg.h
@@ -1,4 +1,3 @@
-/* $Id: memreg.h,v 1.8 1996/08/29 09:48:23 davem Exp $ */
#ifndef _SPARC_MEMREG_H
#define _SPARC_MEMREG_H
/* memreg.h: Definitions of the values found in the synchronous
diff --git a/include/asm-sparc/mman.h b/include/asm-sparc/mman.h
index e18be98..fdfbbf0 100644
--- a/include/asm-sparc/mman.h
+++ b/include/asm-sparc/mman.h
@@ -1,4 +1,3 @@
-/* $Id: mman.h,v 1.9 2000/03/15 02:44:23 davem Exp $ */
#ifndef __SPARC_MMAN_H__
#define __SPARC_MMAN_H__
@@ -24,9 +23,8 @@
#ifdef __KERNEL__
#ifndef __ASSEMBLY__
-#define arch_mmap_check sparc_mmap_check
-int sparc_mmap_check(unsigned long addr, unsigned long len,
- unsigned long flags);
+#define arch_mmap_check(addr,len,flags) sparc_mmap_check(addr,len)
+int sparc_mmap_check(unsigned long addr, unsigned long len);
#endif
#endif
diff --git a/include/asm-sparc/mostek.h b/include/asm-sparc/mostek.h
index 958d051..29aad11 100644
--- a/include/asm-sparc/mostek.h
+++ b/include/asm-sparc/mostek.h
@@ -1,4 +1,4 @@
-/* $Id: mostek.h,v 1.13 2001/01/11 15:07:09 davem Exp $
+/*
* mostek.h: Describes the various Mostek time of day clock registers.
*
* Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
diff --git a/include/asm-sparc/mpmbox.h b/include/asm-sparc/mpmbox.h
index 0e1bc58..f842303 100644
--- a/include/asm-sparc/mpmbox.h
+++ b/include/asm-sparc/mpmbox.h
@@ -1,4 +1,4 @@
-/* $Id: mpmbox.h,v 1.4 1996/04/25 06:13:19 davem Exp $
+/*
* mpmbox.h: Interface and defines for the OpenProm mailbox
* facilities for MP machines under Linux.
*
diff --git a/include/asm-sparc/msi.h b/include/asm-sparc/msi.h
index ff72cbd..724ca56 100644
--- a/include/asm-sparc/msi.h
+++ b/include/asm-sparc/msi.h
@@ -1,4 +1,4 @@
-/* $Id: msi.h,v 1.3 1996/08/29 09:48:25 davem Exp $
+/*
* msi.h: Defines specific to the MBus - Sbus - Interface.
*
* Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
diff --git a/include/asm-sparc/mxcc.h b/include/asm-sparc/mxcc.h
index 128fe97..c0517bd 100644
--- a/include/asm-sparc/mxcc.h
+++ b/include/asm-sparc/mxcc.h
@@ -1,4 +1,4 @@
-/* $Id: mxcc.h,v 1.7 1997/04/20 14:11:46 ecd Exp $
+/*
* mxcc.h: Definitions of the Viking MXCC registers
*
* Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
diff --git a/include/asm-sparc/namei.h b/include/asm-sparc/namei.h
index 618344d..0646102 100644
--- a/include/asm-sparc/namei.h
+++ b/include/asm-sparc/namei.h
@@ -1,4 +1,4 @@
-/* $Id: namei.h,v 1.16 2000/04/13 00:55:54 davem Exp $
+/*
* linux/include/asm-sparc/namei.h
*
* Routines to handle famous /usr/gnemul/s*.
diff --git a/include/asm-sparc/obio.h b/include/asm-sparc/obio.h
index 47854a2..1a7544c 100644
--- a/include/asm-sparc/obio.h
+++ b/include/asm-sparc/obio.h
@@ -1,4 +1,4 @@
-/* $Id: obio.h,v 1.4 1998/03/09 14:04:55 jj Exp $
+/*
* obio.h: Some useful locations in 0xFXXXXXXXX PA obio space on sun4d.
*
* Copyright (C) 1997 Jakub Jelinek <jj@sunsite.mff.cuni.cz>
diff --git a/include/asm-sparc/openprom.h b/include/asm-sparc/openprom.h
index 12929a2..ed4b6bc 100644
--- a/include/asm-sparc/openprom.h
+++ b/include/asm-sparc/openprom.h
@@ -1,4 +1,3 @@
-/* $Id: openprom.h,v 1.24 2000/06/04 06:23:53 anton Exp $ */
#ifndef __SPARC_OPENPROM_H
#define __SPARC_OPENPROM_H
diff --git a/include/asm-sparc/oplib.h b/include/asm-sparc/oplib.h
index 7becc84..61c3ca6 100644
--- a/include/asm-sparc/oplib.h
+++ b/include/asm-sparc/oplib.h
@@ -1,4 +1,4 @@
-/* $Id: oplib.h,v 1.23 2001/12/21 00:54:31 davem Exp $
+/*
* oplib.h: Describes the interface and available routines in the
* Linux Prom library.
*
diff --git a/include/asm-sparc/page.h b/include/asm-sparc/page.h
index 1625a8c..6aa9e4c 100644
--- a/include/asm-sparc/page.h
+++ b/include/asm-sparc/page.h
@@ -1,4 +1,4 @@
-/* $Id: page.h,v 1.55 2000/10/30 21:01:41 davem Exp $
+/*
* page.h: Various defines and such for MMU operations on the Sparc for
* the Linux kernel.
*
diff --git a/include/asm-sparc/param.h b/include/asm-sparc/param.h
index 86ba59a..9836d9a 100644
--- a/include/asm-sparc/param.h
+++ b/include/asm-sparc/param.h
@@ -1,4 +1,3 @@
-/* $Id: param.h,v 1.4 2000/10/30 21:01:41 davem Exp $ */
#ifndef _ASMSPARC_PARAM_H
#define _ASMSPARC_PARAM_H
diff --git a/include/asm-sparc/pbm.h b/include/asm-sparc/pbm.h
index fedd9c6..458a491 100644
--- a/include/asm-sparc/pbm.h
+++ b/include/asm-sparc/pbm.h
@@ -1,4 +1,4 @@
-/* $Id: pbm.h,v 1.3 1999/12/20 17:06:35 zaitcev Exp $
+/*
*
* pbm.h: PCI bus module pseudo driver software state
* Adopted from sparc64 by V. Roganov and G. Raiko
diff --git a/include/asm-sparc/pcic.h b/include/asm-sparc/pcic.h
index dedea14..f20ef56 100644
--- a/include/asm-sparc/pcic.h
+++ b/include/asm-sparc/pcic.h
@@ -1,4 +1,4 @@
-/* $Id: pcic.h,v 1.4 1999/11/17 07:34:20 zaitcev Exp $
+/*
* pcic.h: JavaEngine 1 specific PCI definitions.
*
* Copyright (C) 1998 V. Roganov and G. Raiko
diff --git a/include/asm-sparc/pgalloc.h b/include/asm-sparc/pgalloc.h
index 6292cd0..681582d 100644
--- a/include/asm-sparc/pgalloc.h
+++ b/include/asm-sparc/pgalloc.h
@@ -1,4 +1,3 @@
-/* $Id: pgalloc.h,v 1.16 2001/12/21 04:56:17 davem Exp $ */
#ifndef _SPARC_PGALLOC_H
#define _SPARC_PGALLOC_H
diff --git a/include/asm-sparc/pgtable.h b/include/asm-sparc/pgtable.h
index d84af6d..6051229 100644
--- a/include/asm-sparc/pgtable.h
+++ b/include/asm-sparc/pgtable.h
@@ -1,4 +1,3 @@
-/* $Id: pgtable.h,v 1.110 2001/12/21 04:56:17 davem Exp $ */
#ifndef _SPARC_PGTABLE_H
#define _SPARC_PGTABLE_H
diff --git a/include/asm-sparc/pgtsrmmu.h b/include/asm-sparc/pgtsrmmu.h
index edeb981..808555f 100644
--- a/include/asm-sparc/pgtsrmmu.h
+++ b/include/asm-sparc/pgtsrmmu.h
@@ -1,4 +1,4 @@
-/* $Id: pgtsrmmu.h,v 1.31 2000/07/16 21:48:52 anton Exp $
+/*
* pgtsrmmu.h: SRMMU page table defines and code.
*
* Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
diff --git a/include/asm-sparc/pgtsun4.h b/include/asm-sparc/pgtsun4.h
index 60bda10..5a0d661 100644
--- a/include/asm-sparc/pgtsun4.h
+++ b/include/asm-sparc/pgtsun4.h
@@ -1,4 +1,4 @@
-/* $Id: pgtsun4.h,v 1.5 2000/06/05 06:08:46 anton Exp $
+/*
* pgtsun4.h: Sun4 specific pgtable.h defines and code.
*
* Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
diff --git a/include/asm-sparc/pgtsun4c.h b/include/asm-sparc/pgtsun4c.h
index f53b6db..aeb25e9 100644
--- a/include/asm-sparc/pgtsun4c.h
+++ b/include/asm-sparc/pgtsun4c.h
@@ -1,4 +1,4 @@
-/* $Id: pgtsun4c.h,v 1.37 2000/06/05 06:08:46 anton Exp $
+/*
* pgtsun4c.h: Sun4c specific pgtable.h defines and code.
*
* Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
diff --git a/include/asm-sparc/psr.h b/include/asm-sparc/psr.h
index 2139704..b8c0e5f 100644
--- a/include/asm-sparc/psr.h
+++ b/include/asm-sparc/psr.h
@@ -1,4 +1,4 @@
-/* $Id: psr.h,v 1.15 1997/10/04 08:54:22 ecd Exp $
+/*
* psr.h: This file holds the macros for masking off various parts of
* the processor status register on the Sparc. This is valid
* for Version 8. On the V9 this is renamed to the PSTATE
diff --git a/include/asm-sparc/ptrace.h b/include/asm-sparc/ptrace.h
index 6b5e6ce..11f3bc2 100644
--- a/include/asm-sparc/ptrace.h
+++ b/include/asm-sparc/ptrace.h
@@ -1,4 +1,3 @@
-/* $Id: ptrace.h,v 1.25 1997/03/04 16:27:25 jj Exp $ */
#ifndef _SPARC_PTRACE_H
#define _SPARC_PTRACE_H
@@ -10,6 +9,8 @@
#ifndef __ASSEMBLY__
+#include <linux/types.h>
+
struct pt_regs {
unsigned long psr;
unsigned long pc;
diff --git a/include/asm-sparc/resource.h b/include/asm-sparc/resource.h
index 0514c30..985948a 100644
--- a/include/asm-sparc/resource.h
+++ b/include/asm-sparc/resource.h
@@ -1,4 +1,4 @@
-/* $Id: resource.h,v 1.12 2000/09/23 02:09:21 davem Exp $
+/*
* resource.h: Resource definitions.
*
* Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
diff --git a/include/asm-sparc/ross.h b/include/asm-sparc/ross.h
index f2c14b5..ecb6e81 100644
--- a/include/asm-sparc/ross.h
+++ b/include/asm-sparc/ross.h
@@ -1,4 +1,4 @@
-/* $Id: ross.h,v 1.13 1998/01/07 06:49:11 baccala Exp $
+/*
* ross.h: Ross module specific definitions and defines.
*
* Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
diff --git a/include/asm-sparc/rtc.h b/include/asm-sparc/rtc.h
index f4f261d..f9ecb1f 100644
--- a/include/asm-sparc/rtc.h
+++ b/include/asm-sparc/rtc.h
@@ -1,5 +1,4 @@
-/* $Id: rtc.h,v 1.2 1996/08/21 23:17:39 ecd Exp $
- *
+/*
* rtc.h: Definitions for access to the Mostek real time clock
*
* Copyright (C) 1996 Thomas K. Dyas (tdyas@eden.rutgers.edu)
diff --git a/include/asm-sparc/sbi.h b/include/asm-sparc/sbi.h
index 86a603a..5eb7f19 100644
--- a/include/asm-sparc/sbi.h
+++ b/include/asm-sparc/sbi.h
@@ -1,4 +1,4 @@
-/* $Id: sbi.h,v 1.2 1998/03/09 14:04:48 jj Exp $
+/*
* sbi.h: SBI (Sbus Interface on sun4d) definitions
*
* Copyright (C) 1997 Jakub Jelinek <jj@sunsite.mff.cuni.cz>
diff --git a/include/asm-sparc/sbus.h b/include/asm-sparc/sbus.h
index 27d076c..f1d2fe1 100644
--- a/include/asm-sparc/sbus.h
+++ b/include/asm-sparc/sbus.h
@@ -1,4 +1,4 @@
-/* $Id: sbus.h,v 1.22 2000/02/18 13:50:50 davem Exp $
+/*
* sbus.h: Defines for the Sun SBus.
*
* Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
diff --git a/include/asm-sparc/scatterlist.h b/include/asm-sparc/scatterlist.h
index e08d3d7..c82609c 100644
--- a/include/asm-sparc/scatterlist.h
+++ b/include/asm-sparc/scatterlist.h
@@ -1,4 +1,3 @@
-/* $Id: scatterlist.h,v 1.8 2001/12/17 07:05:15 davem Exp $ */
#ifndef _SPARC_SCATTERLIST_H
#define _SPARC_SCATTERLIST_H
diff --git a/include/asm-sparc/shmparam.h b/include/asm-sparc/shmparam.h
index bb93a6f..59a1243 100644
--- a/include/asm-sparc/shmparam.h
+++ b/include/asm-sparc/shmparam.h
@@ -1,4 +1,3 @@
-/* $Id: shmparam.h,v 1.6 1999/12/09 10:32:41 davem Exp $ */
#ifndef _ASMSPARC_SHMPARAM_H
#define _ASMSPARC_SHMPARAM_H
diff --git a/include/asm-sparc/sigcontext.h b/include/asm-sparc/sigcontext.h
index 7fa2c7d..c5fb60d 100644
--- a/include/asm-sparc/sigcontext.h
+++ b/include/asm-sparc/sigcontext.h
@@ -1,4 +1,3 @@
-/* $Id: sigcontext.h,v 1.14 1999/09/06 08:22:05 jj Exp $ */
#ifndef __SPARC_SIGCONTEXT_H
#define __SPARC_SIGCONTEXT_H
diff --git a/include/asm-sparc/siginfo.h b/include/asm-sparc/siginfo.h
index 2c3ea8b..3c71af1 100644
--- a/include/asm-sparc/siginfo.h
+++ b/include/asm-sparc/siginfo.h
@@ -1,7 +1,3 @@
-/* $Id: siginfo.h,v 1.9 2002/02/08 03:57:18 davem Exp $
- * siginfo.c:
- */
-
#ifndef _SPARC_SIGINFO_H
#define _SPARC_SIGINFO_H
diff --git a/include/asm-sparc/signal.h b/include/asm-sparc/signal.h
index 94071c7..683657d 100644
--- a/include/asm-sparc/signal.h
+++ b/include/asm-sparc/signal.h
@@ -1,4 +1,3 @@
-/* $Id: signal.h,v 1.35 1999/09/06 08:22:04 jj Exp $ */
#ifndef _ASMSPARC_SIGNAL_H
#define _ASMSPARC_SIGNAL_H
diff --git a/include/asm-sparc/smpprim.h b/include/asm-sparc/smpprim.h
index e7b6d34..eb849d8 100644
--- a/include/asm-sparc/smpprim.h
+++ b/include/asm-sparc/smpprim.h
@@ -1,4 +1,4 @@
-/* $Id: smpprim.h,v 1.5 1996/08/29 09:48:49 davem Exp $
+/*
* smpprim.h: SMP locking primitives on the Sparc
*
* God knows we won't be actually using this code for some time
diff --git a/include/asm-sparc/socket.h b/include/asm-sparc/socket.h
index a00e15d..bf50d0c 100644
--- a/include/asm-sparc/socket.h
+++ b/include/asm-sparc/socket.h
@@ -1,4 +1,3 @@
-/* $Id: socket.h,v 1.17 2001/06/13 16:25:03 davem Exp $ */
#ifndef _ASM_SOCKET_H
#define _ASM_SOCKET_H
diff --git a/include/asm-sparc/stat.h b/include/asm-sparc/stat.h
index a5b4272..2299e1d5 100644
--- a/include/asm-sparc/stat.h
+++ b/include/asm-sparc/stat.h
@@ -1,4 +1,3 @@
-/* $Id: stat.h,v 1.12 2000/08/04 05:35:55 davem Exp $ */
#ifndef _SPARC_STAT_H
#define _SPARC_STAT_H
diff --git a/include/asm-sparc/statfs.h b/include/asm-sparc/statfs.h
index d623f14..304520f 100644
--- a/include/asm-sparc/statfs.h
+++ b/include/asm-sparc/statfs.h
@@ -1,4 +1,3 @@
-/* $Id: statfs.h,v 1.4 1996/06/07 00:41:05 ecd Exp $ */
#ifndef _SPARC_STATFS_H
#define _SPARC_STATFS_H
diff --git a/include/asm-sparc/string.h b/include/asm-sparc/string.h
index cb1e923..8d7c0dd 100644
--- a/include/asm-sparc/string.h
+++ b/include/asm-sparc/string.h
@@ -1,4 +1,4 @@
-/* $Id: string.h,v 1.36 2001/12/21 00:54:31 davem Exp $
+/*
* string.h: External definitions for optimized assembly string
* routines for the Linux Kernel.
*
diff --git a/include/asm-sparc/sun4paddr.h b/include/asm-sparc/sun4paddr.h
index d863bfd..d52985f 100644
--- a/include/asm-sparc/sun4paddr.h
+++ b/include/asm-sparc/sun4paddr.h
@@ -1,4 +1,4 @@
-/* $Id: sun4paddr.h,v 1.3 1998/07/28 16:53:27 jj Exp $
+/*
* sun4paddr.h: Various physical addresses on sun4 machines
*
* Copyright (C) 1997 Anton Blanchard (anton@progsoc.uts.edu.au)
diff --git a/include/asm-sparc/sunbpp.h b/include/asm-sparc/sunbpp.h
index 568db79..92ee1a8 100644
--- a/include/asm-sparc/sunbpp.h
+++ b/include/asm-sparc/sunbpp.h
@@ -1,4 +1,4 @@
-/* $Id: sunbpp.h,v 1.1 1999/08/08 14:09:49 shadow Exp $
+/*
* include/asm-sparc/sunbpp.h
*/
diff --git a/include/asm-sparc/sysen.h b/include/asm-sparc/sysen.h
index 692fa6f..6af34ab 100644
--- a/include/asm-sparc/sysen.h
+++ b/include/asm-sparc/sysen.h
@@ -1,4 +1,4 @@
-/* $Id: sysen.h,v 1.3 1995/11/25 02:32:58 davem Exp $
+/*
* sysen.h: Bit fields within the "System Enable" register accessed via
* the ASI_CONTROL address space at address AC_SYSENABLE.
*
diff --git a/include/asm-sparc/termios.h b/include/asm-sparc/termios.h
index 733d405..f7b4409 100644
--- a/include/asm-sparc/termios.h
+++ b/include/asm-sparc/termios.h
@@ -1,4 +1,3 @@
-/* $Id: termios.h,v 1.32 2001/06/01 08:12:11 davem Exp $ */
#ifndef _SPARC_TERMIOS_H
#define _SPARC_TERMIOS_H
diff --git a/include/asm-sparc/timer.h b/include/asm-sparc/timer.h
index cb1fa1d..d909565 100644
--- a/include/asm-sparc/timer.h
+++ b/include/asm-sparc/timer.h
@@ -1,4 +1,4 @@
-/* $Id: timer.h,v 1.21 1999/04/20 13:22:51 anton Exp $
+/*
* timer.h: Definitions for the timer chips on the Sparc.
*
* Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
diff --git a/include/asm-sparc/traps.h b/include/asm-sparc/traps.h
index f62c7f8..bebdbf8 100644
--- a/include/asm-sparc/traps.h
+++ b/include/asm-sparc/traps.h
@@ -1,4 +1,4 @@
-/* $Id: traps.h,v 1.9 1998/03/09 14:04:53 jj Exp $
+/*
* traps.h: Format of entries for the Sparc trap table.
*
* Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
diff --git a/include/asm-sparc/tsunami.h b/include/asm-sparc/tsunami.h
index 887add5..5bbd1d5 100644
--- a/include/asm-sparc/tsunami.h
+++ b/include/asm-sparc/tsunami.h
@@ -1,4 +1,4 @@
-/* $Id: tsunami.h,v 1.5 1996/08/29 09:49:03 davem Exp $
+/*
* tsunami.h: Module specific definitions for Tsunami V8 Sparcs
*
* Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
diff --git a/include/asm-sparc/turbosparc.h b/include/asm-sparc/turbosparc.h
index 31d2350..17c7328 100644
--- a/include/asm-sparc/turbosparc.h
+++ b/include/asm-sparc/turbosparc.h
@@ -1,4 +1,4 @@
-/* $Id: turbosparc.h,v 1.4 1998/08/16 16:02:42 ecd Exp $
+/*
* turbosparc.h: Defines specific to the TurboSparc module.
* This is SRMMU stuff.
*
diff --git a/include/asm-sparc/types.h b/include/asm-sparc/types.h
index 1b08ef8..07734f9 100644
--- a/include/asm-sparc/types.h
+++ b/include/asm-sparc/types.h
@@ -1,4 +1,3 @@
-/* $Id: types.h,v 1.13 2001/12/21 01:22:59 davem Exp $ */
#ifndef _SPARC_TYPES_H
#define _SPARC_TYPES_H
diff --git a/include/asm-sparc/uaccess.h b/include/asm-sparc/uaccess.h
index 366b116..47d5619 100644
--- a/include/asm-sparc/uaccess.h
+++ b/include/asm-sparc/uaccess.h
@@ -1,4 +1,4 @@
-/* $Id: uaccess.h,v 1.24 2001/10/30 04:32:24 davem Exp $
+/*
* uaccess.h: User space memore access functions.
*
* Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
diff --git a/include/asm-sparc/vac-ops.h b/include/asm-sparc/vac-ops.h
index ab6f53b..d105276 100644
--- a/include/asm-sparc/vac-ops.h
+++ b/include/asm-sparc/vac-ops.h
@@ -1,4 +1,3 @@
-/* $Id: vac-ops.h,v 1.13 1998/01/30 10:59:59 jj Exp $ */
#ifndef _SPARC_VAC_OPS_H
#define _SPARC_VAC_OPS_H
diff --git a/include/asm-sparc/vaddrs.h b/include/asm-sparc/vaddrs.h
index 9109739..f6ca477 100644
--- a/include/asm-sparc/vaddrs.h
+++ b/include/asm-sparc/vaddrs.h
@@ -1,4 +1,3 @@
-/* $Id: vaddrs.h,v 1.27 2001/07/04 00:18:18 davem Exp $ */
#ifndef _SPARC_VADDRS_H
#define _SPARC_VADDRS_H
diff --git a/include/asm-sparc/viking.h b/include/asm-sparc/viking.h
index 7541da7..989930a 100644
--- a/include/asm-sparc/viking.h
+++ b/include/asm-sparc/viking.h
@@ -1,4 +1,4 @@
-/* $Id: viking.h,v 1.19 1997/04/20 14:11:48 ecd Exp $
+/*
* viking.h: Defines specific to the GNU/Viking MBUS module.
* This is SRMMU stuff.
*
diff --git a/include/asm-sparc/winmacro.h b/include/asm-sparc/winmacro.h
index 096f3d3..5b0a06d 100644
--- a/include/asm-sparc/winmacro.h
+++ b/include/asm-sparc/winmacro.h
@@ -1,4 +1,4 @@
-/* $Id: winmacro.h,v 1.22 2000/05/09 17:40:15 davem Exp $
+/*
* winmacro.h: Window loading-unloading macros.
*
* Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
diff --git a/include/asm-sparc64/apb.h b/include/asm-sparc64/apb.h
index 80f0df2..8f3b57d 100644
--- a/include/asm-sparc64/apb.h
+++ b/include/asm-sparc64/apb.h
@@ -1,4 +1,4 @@
-/* $Id: apb.h,v 1.2 1998/04/01 20:41:49 ecd Exp $
+/*
* apb.h: Advanced PCI Bridge Configuration Registers and Bits
*
* Copyright (C) 1998 Eddie C. Dost (ecd@skynet.be)
diff --git a/include/asm-sparc64/asi.h b/include/asm-sparc64/asi.h
index 662a211..bc57c40 100644
--- a/include/asm-sparc64/asi.h
+++ b/include/asm-sparc64/asi.h
@@ -1,4 +1,3 @@
-/* $Id: asi.h,v 1.5 2001/03/29 11:47:47 davem Exp $ */
#ifndef _SPARC64_ASI_H
#define _SPARC64_ASI_H
diff --git a/include/asm-sparc64/auxio.h b/include/asm-sparc64/auxio.h
index 81a590a..c410049 100644
--- a/include/asm-sparc64/auxio.h
+++ b/include/asm-sparc64/auxio.h
@@ -1,4 +1,4 @@
-/* $Id: auxio.h,v 1.3 2001/06/05 08:16:34 davem Exp $
+/*
* auxio.h: Definitions and code for the Auxiliary I/O registers.
*
* Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
diff --git a/include/asm-sparc64/bbc.h b/include/asm-sparc64/bbc.h
index 368fce4..423a858 100644
--- a/include/asm-sparc64/bbc.h
+++ b/include/asm-sparc64/bbc.h
@@ -1,4 +1,4 @@
-/* $Id: bbc.h,v 1.2 2001/03/26 23:47:18 davem Exp $
+/*
* bbc.h: Defines for BootBus Controller found on UltraSPARC-III
* systems.
*
diff --git a/include/asm-sparc64/bitops.h b/include/asm-sparc64/bitops.h
index 11f9d81..bb87b80 100644
--- a/include/asm-sparc64/bitops.h
+++ b/include/asm-sparc64/bitops.h
@@ -1,4 +1,4 @@
-/* $Id: bitops.h,v 1.39 2002/01/30 01:40:00 davem Exp $
+/*
* bitops.h: Bit string operations on the V9.
*
* Copyright 1996, 1997 David S. Miller (davem@caip.rutgers.edu)
diff --git a/include/asm-sparc64/chafsr.h b/include/asm-sparc64/chafsr.h
index fd16883..85c69b3 100644
--- a/include/asm-sparc64/chafsr.h
+++ b/include/asm-sparc64/chafsr.h
@@ -1,4 +1,3 @@
-/* $Id: chafsr.h,v 1.1 2001/03/28 10:56:34 davem Exp $ */
#ifndef _SPARC64_CHAFSR_H
#define _SPARC64_CHAFSR_H
diff --git a/include/asm-sparc64/checksum.h b/include/asm-sparc64/checksum.h
index 70a006d..b290564 100644
--- a/include/asm-sparc64/checksum.h
+++ b/include/asm-sparc64/checksum.h
@@ -1,4 +1,3 @@
-/* $Id: checksum.h,v 1.19 2002/02/09 19:49:31 davem Exp $ */
#ifndef __SPARC64_CHECKSUM_H
#define __SPARC64_CHECKSUM_H
diff --git a/include/asm-sparc64/chmctrl.h b/include/asm-sparc64/chmctrl.h
index 53047f9..859b4a4 100644
--- a/include/asm-sparc64/chmctrl.h
+++ b/include/asm-sparc64/chmctrl.h
@@ -1,4 +1,3 @@
-/* $Id: chmctrl.h,v 1.1 2001/03/29 11:43:28 davem Exp $ */
#ifndef _SPARC64_CHMCTRL_H
#define _SPARC64_CHMCTRL_H
diff --git a/include/asm-sparc64/dcr.h b/include/asm-sparc64/dcr.h
index e9a3f30..620c9ba 100644
--- a/include/asm-sparc64/dcr.h
+++ b/include/asm-sparc64/dcr.h
@@ -1,4 +1,3 @@
-/* $Id: dcr.h,v 1.4 2001/03/09 17:56:37 davem Exp $ */
#ifndef _SPARC64_DCR_H
#define _SPARC64_DCR_H
diff --git a/include/asm-sparc64/display7seg.h b/include/asm-sparc64/display7seg.h
index 955a350..c066a89 100644
--- a/include/asm-sparc64/display7seg.h
+++ b/include/asm-sparc64/display7seg.h
@@ -1,4 +1,4 @@
-/* $Id: display7seg.h,v 1.2 2000/08/02 06:22:35 davem Exp $
+/*
*
* display7seg - Driver interface for the 7-segment display
* present on Sun Microsystems CP1400 and CP1500
diff --git a/include/asm-sparc64/dma.h b/include/asm-sparc64/dma.h
index a9fd0618..9d4c024 100644
--- a/include/asm-sparc64/dma.h
+++ b/include/asm-sparc64/dma.h
@@ -1,4 +1,4 @@
-/* $Id: dma.h,v 1.21 2001/12/13 04:16:52 davem Exp $
+/*
* include/asm-sparc64/dma.h
*
* Copyright 1996 (C) David S. Miller (davem@caip.rutgers.edu)
diff --git a/include/asm-sparc64/ebus.h b/include/asm-sparc64/ebus.h
index 9c1c6db..fcc62b9 100644
--- a/include/asm-sparc64/ebus.h
+++ b/include/asm-sparc64/ebus.h
@@ -1,4 +1,4 @@
-/* $Id: ebus.h,v 1.10 2001/03/14 05:00:55 davem Exp $
+/*
* ebus.h: PCI to Ebus pseudo driver software state.
*
* Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be)
diff --git a/include/asm-sparc64/elf.h b/include/asm-sparc64/elf.h
index 11c8e68..0818a13 100644
--- a/include/asm-sparc64/elf.h
+++ b/include/asm-sparc64/elf.h
@@ -1,4 +1,3 @@
-/* $Id: elf.h,v 1.32 2002/02/09 19:49:31 davem Exp $ */
#ifndef __ASM_SPARC64_ELF_H
#define __ASM_SPARC64_ELF_H
diff --git a/include/asm-sparc64/envctrl.h b/include/asm-sparc64/envctrl.h
index 53a6653..a5668a0 100644
--- a/include/asm-sparc64/envctrl.h
+++ b/include/asm-sparc64/envctrl.h
@@ -1,4 +1,4 @@
-/* $Id: envctrl.h,v 1.3 2000/11/03 00:37:40 davem Exp $
+/*
*
* envctrl.h: Definitions for access to the i2c environment
* monitoring on Ultrasparc systems.
diff --git a/include/asm-sparc64/estate.h b/include/asm-sparc64/estate.h
index a719c3d..520c085 100644
--- a/include/asm-sparc64/estate.h
+++ b/include/asm-sparc64/estate.h
@@ -1,4 +1,3 @@
-/* $Id: estate.h,v 1.1 2001/03/28 10:56:34 davem Exp $ */
#ifndef _SPARC64_ESTATE_H
#define _SPARC64_ESTATE_H
diff --git a/include/asm-sparc64/fcntl.h b/include/asm-sparc64/fcntl.h
index 111f6b3..8a09ca7 100644
--- a/include/asm-sparc64/fcntl.h
+++ b/include/asm-sparc64/fcntl.h
@@ -1,4 +1,3 @@
-/* $Id: fcntl.h,v 1.12 2001/09/20 00:35:34 davem Exp $ */
#ifndef _SPARC64_FCNTL_H
#define _SPARC64_FCNTL_H
diff --git a/include/asm-sparc64/fhc.h b/include/asm-sparc64/fhc.h
index 9e7f1b0..ddffcdf 100644
--- a/include/asm-sparc64/fhc.h
+++ b/include/asm-sparc64/fhc.h
@@ -1,4 +1,4 @@
-/* $Id: fhc.h,v 1.5 1999/09/21 14:39:29 davem Exp $
+/*
* fhc.h: Structures for central/fhc pseudo driver on Sunfire/Starfire/Wildfire.
*
* Copyright (C) 1997, 1999 David S. Miller (davem@redhat.com)
diff --git a/include/asm-sparc64/head.h b/include/asm-sparc64/head.h
index 67960a7..10e9dab 100644
--- a/include/asm-sparc64/head.h
+++ b/include/asm-sparc64/head.h
@@ -1,4 +1,3 @@
-/* $Id: head.h,v 1.30 1997/08/08 08:34:33 jj Exp $ */
#ifndef _SPARC64_HEAD_H
#define _SPARC64_HEAD_H
diff --git a/include/asm-sparc64/ide.h b/include/asm-sparc64/ide.h
index c5fdabe..1282676 100644
--- a/include/asm-sparc64/ide.h
+++ b/include/asm-sparc64/ide.h
@@ -1,4 +1,4 @@
-/* $Id: ide.h,v 1.21 2001/09/25 20:21:48 kanoj Exp $
+/*
* ide.h: Ultra/PCI specific IDE glue.
*
* Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu)
diff --git a/include/asm-sparc64/idprom.h b/include/asm-sparc64/idprom.h
index 77fbf98..a363fa0 100644
--- a/include/asm-sparc64/idprom.h
+++ b/include/asm-sparc64/idprom.h
@@ -1,4 +1,4 @@
-/* $Id: idprom.h,v 1.2 1997/04/04 00:50:16 davem Exp $
+/*
* idprom.h: Macros and defines for idprom routines
*
* Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
diff --git a/include/asm-sparc64/io.h b/include/asm-sparc64/io.h
index c299b85..3158960 100644
--- a/include/asm-sparc64/io.h
+++ b/include/asm-sparc64/io.h
@@ -24,7 +24,8 @@
__asm__ __volatile__("lduba\t[%1] %2, %0\t/* pci_inb */"
: "=r" (ret)
- : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L));
+ : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+ : "memory");
return ret;
}
@@ -35,7 +36,8 @@
__asm__ __volatile__("lduha\t[%1] %2, %0\t/* pci_inw */"
: "=r" (ret)
- : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L));
+ : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+ : "memory");
return ret;
}
@@ -46,7 +48,8 @@
__asm__ __volatile__("lduwa\t[%1] %2, %0\t/* pci_inl */"
: "=r" (ret)
- : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L));
+ : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+ : "memory");
return ret;
}
@@ -55,21 +58,24 @@
{
__asm__ __volatile__("stba\t%r0, [%1] %2\t/* pci_outb */"
: /* no outputs */
- : "Jr" (b), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L));
+ : "Jr" (b), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+ : "memory");
}
static inline void _outw(u16 w, unsigned long addr)
{
__asm__ __volatile__("stha\t%r0, [%1] %2\t/* pci_outw */"
: /* no outputs */
- : "Jr" (w), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L));
+ : "Jr" (w), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+ : "memory");
}
static inline void _outl(u32 l, unsigned long addr)
{
__asm__ __volatile__("stwa\t%r0, [%1] %2\t/* pci_outl */"
: /* no outputs */
- : "Jr" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L));
+ : "Jr" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+ : "memory");
}
#define inb(__addr) (_inb((unsigned long)(__addr)))
@@ -128,7 +134,8 @@
__asm__ __volatile__("lduba\t[%1] %2, %0\t/* pci_readb */"
: "=r" (ret)
- : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L));
+ : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+ : "memory");
return ret;
}
@@ -137,7 +144,8 @@
__asm__ __volatile__("lduha\t[%1] %2, %0\t/* pci_readw */"
: "=r" (ret)
- : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L));
+ : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+ : "memory");
return ret;
}
@@ -147,7 +155,8 @@
__asm__ __volatile__("lduwa\t[%1] %2, %0\t/* pci_readl */"
: "=r" (ret)
- : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L));
+ : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+ : "memory");
return ret;
}
@@ -157,7 +166,8 @@
__asm__ __volatile__("ldxa\t[%1] %2, %0\t/* pci_readq */"
: "=r" (ret)
- : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L));
+ : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+ : "memory");
return ret;
}
@@ -166,28 +176,32 @@
{
__asm__ __volatile__("stba\t%r0, [%1] %2\t/* pci_writeb */"
: /* no outputs */
- : "Jr" (b), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L));
+ : "Jr" (b), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+ : "memory");
}
static inline void _writew(u16 w, volatile void __iomem *addr)
{
__asm__ __volatile__("stha\t%r0, [%1] %2\t/* pci_writew */"
: /* no outputs */
- : "Jr" (w), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L));
+ : "Jr" (w), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+ : "memory");
}
static inline void _writel(u32 l, volatile void __iomem *addr)
{
__asm__ __volatile__("stwa\t%r0, [%1] %2\t/* pci_writel */"
: /* no outputs */
- : "Jr" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L));
+ : "Jr" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+ : "memory");
}
static inline void _writeq(u64 q, volatile void __iomem *addr)
{
__asm__ __volatile__("stxa\t%r0, [%1] %2\t/* pci_writeq */"
: /* no outputs */
- : "Jr" (q), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L));
+ : "Jr" (q), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
+ : "memory");
}
#define readb(__addr) _readb(__addr)
@@ -299,7 +313,8 @@
__asm__ __volatile__("lduba\t[%1] %2, %0\t/* sbus_readb */"
: "=r" (ret)
- : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+ : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)
+ : "memory");
return ret;
}
@@ -310,7 +325,8 @@
__asm__ __volatile__("lduha\t[%1] %2, %0\t/* sbus_readw */"
: "=r" (ret)
- : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+ : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)
+ : "memory");
return ret;
}
@@ -321,7 +337,8 @@
__asm__ __volatile__("lduwa\t[%1] %2, %0\t/* sbus_readl */"
: "=r" (ret)
- : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+ : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)
+ : "memory");
return ret;
}
@@ -332,7 +349,8 @@
__asm__ __volatile__("ldxa\t[%1] %2, %0\t/* sbus_readq */"
: "=r" (ret)
- : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+ : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)
+ : "memory");
return ret;
}
@@ -341,28 +359,32 @@
{
__asm__ __volatile__("stba\t%r0, [%1] %2\t/* sbus_writeb */"
: /* no outputs */
- : "Jr" (b), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+ : "Jr" (b), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)
+ : "memory");
}
static inline void _sbus_writew(u16 w, volatile void __iomem *addr)
{
__asm__ __volatile__("stha\t%r0, [%1] %2\t/* sbus_writew */"
: /* no outputs */
- : "Jr" (w), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+ : "Jr" (w), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)
+ : "memory");
}
static inline void _sbus_writel(u32 l, volatile void __iomem *addr)
{
__asm__ __volatile__("stwa\t%r0, [%1] %2\t/* sbus_writel */"
: /* no outputs */
- : "Jr" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+ : "Jr" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)
+ : "memory");
}
static inline void _sbus_writeq(u64 l, volatile void __iomem *addr)
{
__asm__ __volatile__("stxa\t%r0, [%1] %2\t/* sbus_writeq */"
: /* no outputs */
- : "Jr" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E));
+ : "Jr" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)
+ : "memory");
}
#define sbus_readb(__addr) _sbus_readb(__addr)
diff --git a/include/asm-sparc64/ioctl.h b/include/asm-sparc64/ioctl.h
index 253d0b5..d634c21 100644
--- a/include/asm-sparc64/ioctl.h
+++ b/include/asm-sparc64/ioctl.h
@@ -1,4 +1,3 @@
-/* $Id: ioctl.h,v 1.2 1998/10/15 05:40:38 jj Exp $ */
#ifndef _SPARC64_IOCTL_H
#define _SPARC64_IOCTL_H
diff --git a/include/asm-sparc64/ioctls.h b/include/asm-sparc64/ioctls.h
index c1be406..94d1b75 100644
--- a/include/asm-sparc64/ioctls.h
+++ b/include/asm-sparc64/ioctls.h
@@ -1,4 +1,3 @@
-/* $Id: ioctls.h,v 1.7 1998/02/23 02:49:41 davem Exp $ */
#ifndef _ASM_SPARC64_IOCTLS_H
#define _ASM_SPARC64_IOCTLS_H
diff --git a/include/asm-sparc64/lsu.h b/include/asm-sparc64/lsu.h
index 79f1098..7190f8d 100644
--- a/include/asm-sparc64/lsu.h
+++ b/include/asm-sparc64/lsu.h
@@ -1,4 +1,3 @@
-/* $Id: lsu.h,v 1.2 1997/04/04 00:50:22 davem Exp $ */
#ifndef _SPARC64_LSU_H
#define _SPARC64_LSU_H
diff --git a/include/asm-sparc64/mman.h b/include/asm-sparc64/mman.h
index e584563..d2ae67c 100644
--- a/include/asm-sparc64/mman.h
+++ b/include/asm-sparc64/mman.h
@@ -1,4 +1,3 @@
-/* $Id: mman.h,v 1.2 2000/03/15 02:44:26 davem Exp $ */
#ifndef __SPARC64_MMAN_H__
#define __SPARC64_MMAN_H__
@@ -24,9 +23,8 @@
#ifdef __KERNEL__
#ifndef __ASSEMBLY__
-#define arch_mmap_check sparc64_mmap_check
-int sparc64_mmap_check(unsigned long addr, unsigned long len,
- unsigned long flags);
+#define arch_mmap_check(addr,len,flags) sparc64_mmap_check(addr,len)
+int sparc64_mmap_check(unsigned long addr, unsigned long len);
#endif
#endif
diff --git a/include/asm-sparc64/mmu_context.h b/include/asm-sparc64/mmu_context.h
index 9fc225e..5693ab4 100644
--- a/include/asm-sparc64/mmu_context.h
+++ b/include/asm-sparc64/mmu_context.h
@@ -1,4 +1,3 @@
-/* $Id: mmu_context.h,v 1.54 2002/02/09 19:49:31 davem Exp $ */
#ifndef __SPARC64_MMU_CONTEXT_H
#define __SPARC64_MMU_CONTEXT_H
diff --git a/include/asm-sparc64/namei.h b/include/asm-sparc64/namei.h
index 275161f..cbc1b4c 100644
--- a/include/asm-sparc64/namei.h
+++ b/include/asm-sparc64/namei.h
@@ -1,4 +1,4 @@
-/* $Id: namei.h,v 1.17 2000/04/13 00:55:54 davem Exp $
+/*
* linux/include/asm-sparc64/namei.h
*
* Routines to handle famous /usr/gnemul/s*.
diff --git a/include/asm-sparc64/openprom.h b/include/asm-sparc64/openprom.h
index 26ec046..b69e4a8 100644
--- a/include/asm-sparc64/openprom.h
+++ b/include/asm-sparc64/openprom.h
@@ -1,4 +1,3 @@
-/* $Id: openprom.h,v 1.9 2001/03/16 10:22:02 davem Exp $ */
#ifndef __SPARC64_OPENPROM_H
#define __SPARC64_OPENPROM_H
diff --git a/include/asm-sparc64/page.h b/include/asm-sparc64/page.h
index 618117d..93f0881 100644
--- a/include/asm-sparc64/page.h
+++ b/include/asm-sparc64/page.h
@@ -1,5 +1,3 @@
-/* $Id: page.h,v 1.39 2002/02/09 19:49:31 davem Exp $ */
-
#ifndef _SPARC64_PAGE_H
#define _SPARC64_PAGE_H
diff --git a/include/asm-sparc64/pgalloc.h b/include/asm-sparc64/pgalloc.h
index 3ee2d40..326de10 100644
--- a/include/asm-sparc64/pgalloc.h
+++ b/include/asm-sparc64/pgalloc.h
@@ -1,4 +1,3 @@
-/* $Id: pgalloc.h,v 1.30 2001/12/21 04:56:17 davem Exp $ */
#ifndef _SPARC64_PGALLOC_H
#define _SPARC64_PGALLOC_H
diff --git a/include/asm-sparc64/pgtable.h b/include/asm-sparc64/pgtable.h
index 0e200e7..b870177 100644
--- a/include/asm-sparc64/pgtable.h
+++ b/include/asm-sparc64/pgtable.h
@@ -1,4 +1,4 @@
-/* $Id: pgtable.h,v 1.156 2002/02/09 19:49:31 davem Exp $
+/*
* pgtable.h: SpitFire page table operations.
*
* Copyright 1996,1997 David S. Miller (davem@caip.rutgers.edu)
diff --git a/include/asm-sparc64/pil.h b/include/asm-sparc64/pil.h
index 2f5d126..eaac842 100644
--- a/include/asm-sparc64/pil.h
+++ b/include/asm-sparc64/pil.h
@@ -1,4 +1,3 @@
-/* $Id: pil.h,v 1.1 2002/01/23 11:27:36 davem Exp $ */
#ifndef _SPARC64_PIL_H
#define _SPARC64_PIL_H
diff --git a/include/asm-sparc64/processor.h b/include/asm-sparc64/processor.h
index 885b6a1..26b4e52 100644
--- a/include/asm-sparc64/processor.h
+++ b/include/asm-sparc64/processor.h
@@ -1,4 +1,4 @@
-/* $Id: processor.h,v 1.83 2002/02/10 06:04:33 davem Exp $
+/*
* include/asm-sparc64/processor.h
*
* Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
diff --git a/include/asm-sparc64/psrcompat.h b/include/asm-sparc64/psrcompat.h
index 3614ca0..44b6327 100644
--- a/include/asm-sparc64/psrcompat.h
+++ b/include/asm-sparc64/psrcompat.h
@@ -1,4 +1,3 @@
-/* $Id: psrcompat.h,v 1.5 1998/10/06 09:28:39 jj Exp $ */
#ifndef _SPARC64_PSRCOMPAT_H
#define _SPARC64_PSRCOMPAT_H
diff --git a/include/asm-sparc64/pstate.h b/include/asm-sparc64/pstate.h
index 949aeba..a26a537 100644
--- a/include/asm-sparc64/pstate.h
+++ b/include/asm-sparc64/pstate.h
@@ -1,4 +1,3 @@
-/* $Id: pstate.h,v 1.6 1997/06/25 07:39:45 jj Exp $ */
#ifndef _SPARC64_PSTATE_H
#define _SPARC64_PSTATE_H
diff --git a/include/asm-sparc64/ptrace.h b/include/asm-sparc64/ptrace.h
index 90972a5..b163da7 100644
--- a/include/asm-sparc64/ptrace.h
+++ b/include/asm-sparc64/ptrace.h
@@ -128,6 +128,17 @@
#ifdef __KERNEL__
+struct global_reg_snapshot {
+ unsigned long tstate;
+ unsigned long tpc;
+ unsigned long tnpc;
+ unsigned long o7;
+ unsigned long i7;
+ struct thread_info *thread;
+ unsigned long pad1;
+ unsigned long pad2;
+};
+
#define __ARCH_WANT_COMPAT_SYS_PTRACE
#define force_successful_syscall_return() \
@@ -295,6 +306,20 @@
#define SF_XARG5 0x58
#define SF_XXARG 0x5c
+#ifdef __KERNEL__
+
+/* global_reg_snapshot offsets */
+#define GR_SNAP_TSTATE 0x00
+#define GR_SNAP_TPC 0x08
+#define GR_SNAP_TNPC 0x10
+#define GR_SNAP_O7 0x18
+#define GR_SNAP_I7 0x20
+#define GR_SNAP_THREAD 0x28
+#define GR_SNAP_PAD1 0x30
+#define GR_SNAP_PAD2 0x38
+
+#endif /* __KERNEL__ */
+
/* Stuff for the ptrace system call */
#define PTRACE_SPARC_DETACH 11
#define PTRACE_GETREGS 12
diff --git a/include/asm-sparc64/reg.h b/include/asm-sparc64/reg.h
index fc68f90..77aa480 100644
--- a/include/asm-sparc64/reg.h
+++ b/include/asm-sparc64/reg.h
@@ -1,4 +1,4 @@
-/* $Id: reg.h,v 1.6 1999/09/06 08:22:10 jj Exp $
+/*
* linux/asm-sparc64/reg.h
* Layout of the registers as expected by gdb on the Sparc
* we should replace the user.h definitions with those in
diff --git a/include/asm-sparc64/resource.h b/include/asm-sparc64/resource.h
index aa46979..4f08fb5 100644
--- a/include/asm-sparc64/resource.h
+++ b/include/asm-sparc64/resource.h
@@ -1,4 +1,4 @@
-/* $Id: resource.h,v 1.8 2000/09/23 02:09:21 davem Exp $
+/*
* resource.h: Resource definitions.
*
* Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
diff --git a/include/asm-sparc64/rtc.h b/include/asm-sparc64/rtc.h
index cb17334..f9ecb1f 100644
--- a/include/asm-sparc64/rtc.h
+++ b/include/asm-sparc64/rtc.h
@@ -1,5 +1,4 @@
-/* $Id: rtc.h,v 1.1 1996/12/26 14:22:35 davem Exp $
- *
+/*
* rtc.h: Definitions for access to the Mostek real time clock
*
* Copyright (C) 1996 Thomas K. Dyas (tdyas@eden.rutgers.edu)
diff --git a/include/asm-sparc64/rwsem.h b/include/asm-sparc64/rwsem.h
index 1294b7c..1dc129a 100644
--- a/include/asm-sparc64/rwsem.h
+++ b/include/asm-sparc64/rwsem.h
@@ -1,4 +1,4 @@
-/* $Id: rwsem.h,v 1.5 2001/11/18 00:12:56 davem Exp $
+/*
* rwsem.h: R/W semaphores implemented using CAS
*
* Written by David S. Miller (davem@redhat.com), 2001.
diff --git a/include/asm-sparc64/scatterlist.h b/include/asm-sparc64/scatterlist.h
index 6df23f0..81bd058 100644
--- a/include/asm-sparc64/scatterlist.h
+++ b/include/asm-sparc64/scatterlist.h
@@ -1,4 +1,3 @@
-/* $Id: scatterlist.h,v 1.11 2001/12/17 07:05:15 davem Exp $ */
#ifndef _SPARC64_SCATTERLIST_H
#define _SPARC64_SCATTERLIST_H
diff --git a/include/asm-sparc64/shmparam.h b/include/asm-sparc64/shmparam.h
index 8c66fde..1ed0d67 100644
--- a/include/asm-sparc64/shmparam.h
+++ b/include/asm-sparc64/shmparam.h
@@ -1,4 +1,3 @@
-/* $Id: shmparam.h,v 1.5 2001/09/24 21:17:57 kanoj Exp $ */
#ifndef _ASMSPARC64_SHMPARAM_H
#define _ASMSPARC64_SHMPARAM_H
diff --git a/include/asm-sparc64/sigcontext.h b/include/asm-sparc64/sigcontext.h
index d807337..1c868d6 100644
--- a/include/asm-sparc64/sigcontext.h
+++ b/include/asm-sparc64/sigcontext.h
@@ -1,4 +1,3 @@
-/* $Id: sigcontext.h,v 1.12 1999/09/06 08:22:09 jj Exp $ */
#ifndef __SPARC64_SIGCONTEXT_H
#define __SPARC64_SIGCONTEXT_H
diff --git a/include/asm-sparc64/signal.h b/include/asm-sparc64/signal.h
index c49f32d..2a7c793 100644
--- a/include/asm-sparc64/signal.h
+++ b/include/asm-sparc64/signal.h
@@ -1,4 +1,3 @@
-/* $Id: signal.h,v 1.9 1999/09/06 08:22:11 jj Exp $ */
#ifndef _ASMSPARC64_SIGNAL_H
#define _ASMSPARC64_SIGNAL_H
diff --git a/include/asm-sparc64/smp.h b/include/asm-sparc64/smp.h
index 1c1c5ea..cd0311b 100644
--- a/include/asm-sparc64/smp.h
+++ b/include/asm-sparc64/smp.h
@@ -1,6 +1,6 @@
/* smp.h: Sparc64 specific SMP stuff.
*
- * Copyright (C) 1996 David S. Miller (davem@caip.rutgers.edu)
+ * Copyright (C) 1996, 2008 David S. Miller (davem@davemloft.net)
*/
#ifndef _SPARC64_SMP_H
@@ -44,6 +44,8 @@
extern void smp_fill_in_sib_core_maps(void);
extern void cpu_play_dead(void);
+extern void smp_fetch_global_regs(void);
+
#ifdef CONFIG_HOTPLUG_CPU
extern int __cpu_disable(void);
extern void __cpu_die(unsigned int cpu);
@@ -55,6 +57,7 @@
#define hard_smp_processor_id() 0
#define smp_fill_in_sib_core_maps() do { } while (0)
+#define smp_fetch_global_regs() do { } while (0)
#endif /* !(CONFIG_SMP) */
diff --git a/include/asm-sparc64/socket.h b/include/asm-sparc64/socket.h
index 8cf071f..5af688f 100644
--- a/include/asm-sparc64/socket.h
+++ b/include/asm-sparc64/socket.h
@@ -1,4 +1,3 @@
-/* $Id: socket.h,v 1.10 2001/06/13 16:25:03 davem Exp $ */
#ifndef _ASM_SOCKET_H
#define _ASM_SOCKET_H
diff --git a/include/asm-sparc64/starfire.h b/include/asm-sparc64/starfire.h
index 48b50b5..07bafd3 100644
--- a/include/asm-sparc64/starfire.h
+++ b/include/asm-sparc64/starfire.h
@@ -1,4 +1,4 @@
-/* $Id: starfire.h,v 1.2 2001/07/04 00:18:18 davem Exp $
+/*
* starfire.h: Group all starfire specific code together.
*
* Copyright (C) 2000 Anton Blanchard (anton@samba.org)
diff --git a/include/asm-sparc64/stat.h b/include/asm-sparc64/stat.h
index 128c27e..9650fde 100644
--- a/include/asm-sparc64/stat.h
+++ b/include/asm-sparc64/stat.h
@@ -1,4 +1,3 @@
-/* $Id: stat.h,v 1.7 2000/08/04 05:35:55 davem Exp $ */
#ifndef _SPARC64_STAT_H
#define _SPARC64_STAT_H
diff --git a/include/asm-sparc64/statfs.h b/include/asm-sparc64/statfs.h
index 185b6c4..79b3c89 100644
--- a/include/asm-sparc64/statfs.h
+++ b/include/asm-sparc64/statfs.h
@@ -1,4 +1,3 @@
-/* $Id: statfs.h,v 1.2 1997/04/14 17:05:22 jj Exp $ */
#ifndef _SPARC64_STATFS_H
#define _SPARC64_STATFS_H
diff --git a/include/asm-sparc64/string.h b/include/asm-sparc64/string.h
index c7d8862..43161f2 100644
--- a/include/asm-sparc64/string.h
+++ b/include/asm-sparc64/string.h
@@ -1,4 +1,4 @@
-/* $Id: string.h,v 1.20 2001/09/27 04:36:24 kanoj Exp $
+/*
* string.h: External definitions for optimized assembly string
* routines for the Linux Kernel.
*
diff --git a/include/asm-sparc64/sunbpp.h b/include/asm-sparc64/sunbpp.h
index b441cc9..8e171b7 100644
--- a/include/asm-sparc64/sunbpp.h
+++ b/include/asm-sparc64/sunbpp.h
@@ -1,4 +1,4 @@
-/* $Id: sunbpp.h,v 1.1 1999/08/13 06:21:44 shadow Exp $
+/*
* include/asm-sparc64/sunbpp.h
*/
diff --git a/include/asm-sparc64/termios.h b/include/asm-sparc64/termios.h
index cacbea1..1f5dab2 100644
--- a/include/asm-sparc64/termios.h
+++ b/include/asm-sparc64/termios.h
@@ -1,4 +1,3 @@
-/* $Id: termios.h,v 1.11 2001/06/01 08:12:11 davem Exp $ */
#ifndef _SPARC64_TERMIOS_H
#define _SPARC64_TERMIOS_H
diff --git a/include/asm-sparc64/thread_info.h b/include/asm-sparc64/thread_info.h
index 71e42d1..e5873e3 100644
--- a/include/asm-sparc64/thread_info.h
+++ b/include/asm-sparc64/thread_info.h
@@ -38,7 +38,7 @@
struct task_struct *task;
unsigned long flags;
__u8 fpsaved[7];
- __u8 pad;
+ __u8 status;
unsigned long ksp;
/* D$ line 2 */
@@ -217,7 +217,7 @@
* nop
*/
#define TIF_SYSCALL_TRACE 0 /* syscall trace active */
-#define TIF_RESTORE_SIGMASK 1 /* restore signal mask in do_signal() */
+/* flags bit 1 is available */
#define TIF_SIGPENDING 2 /* signal pending */
#define TIF_NEED_RESCHED 3 /* rescheduling necessary */
#define TIF_PERFCTR 4 /* performance counters active */
@@ -244,14 +244,34 @@
#define _TIF_32BIT (1<<TIF_32BIT)
#define _TIF_SECCOMP (1<<TIF_SECCOMP)
#define _TIF_SYSCALL_AUDIT (1<<TIF_SYSCALL_AUDIT)
-#define _TIF_RESTORE_SIGMASK (1<<TIF_RESTORE_SIGMASK)
#define _TIF_ABI_PENDING (1<<TIF_ABI_PENDING)
#define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG)
#define _TIF_USER_WORK_MASK ((0xff << TI_FLAG_WSAVED_SHIFT) | \
- (_TIF_SIGPENDING | _TIF_RESTORE_SIGMASK | \
+ (_TIF_SIGPENDING | \
_TIF_NEED_RESCHED | _TIF_PERFCTR))
+/*
+ * Thread-synchronous status.
+ *
+ * This is different from the flags in that nobody else
+ * ever touches our thread-synchronous status, so we don't
+ * have to worry about atomic accesses.
+ *
+ * Note that there are only 8 bits available.
+ */
+#define TS_RESTORE_SIGMASK 0x0001 /* restore signal mask in do_signal() */
+
+#ifndef __ASSEMBLY__
+#define HAVE_SET_RESTORE_SIGMASK 1
+static inline void set_restore_sigmask(void)
+{
+ struct thread_info *ti = current_thread_info();
+ ti->status |= TS_RESTORE_SIGMASK;
+ set_bit(TIF_SIGPENDING, &ti->flags);
+}
+#endif /* !__ASSEMBLY__ */
+
#endif /* __KERNEL__ */
#endif /* _ASM_THREAD_INFO_H */
diff --git a/include/asm-sparc64/ttable.h b/include/asm-sparc64/ttable.h
index 52d67d3..0ba1995 100644
--- a/include/asm-sparc64/ttable.h
+++ b/include/asm-sparc64/ttable.h
@@ -1,4 +1,3 @@
-/* $Id: ttable.h,v 1.18 2002/02/09 19:49:32 davem Exp $ */
#ifndef _SPARC64_TTABLE_H
#define _SPARC64_TTABLE_H
diff --git a/include/asm-sparc64/types.h b/include/asm-sparc64/types.h
index 5dbe04f..b27ccc8 100644
--- a/include/asm-sparc64/types.h
+++ b/include/asm-sparc64/types.h
@@ -1,4 +1,3 @@
-/* $Id: types.h,v 1.4 2001/10/09 02:24:35 davem Exp $ */
#ifndef _SPARC64_TYPES_H
#define _SPARC64_TYPES_H
diff --git a/include/asm-sparc64/uaccess.h b/include/asm-sparc64/uaccess.h
index d8547b8..5fcbaf6 100644
--- a/include/asm-sparc64/uaccess.h
+++ b/include/asm-sparc64/uaccess.h
@@ -1,4 +1,3 @@
-/* $Id: uaccess.h,v 1.35 2002/02/09 19:49:31 davem Exp $ */
#ifndef _ASM_UACCESS_H
#define _ASM_UACCESS_H
diff --git a/include/asm-sparc64/uctx.h b/include/asm-sparc64/uctx.h
index 6eaf16e..dc937c7 100644
--- a/include/asm-sparc64/uctx.h
+++ b/include/asm-sparc64/uctx.h
@@ -1,4 +1,4 @@
-/* $Id: uctx.h,v 1.1 1997/06/18 16:51:58 davem Exp $
+/*
* uctx.h: Sparc64 {set,get}context() register state layouts.
*
* Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu)
diff --git a/include/asm-sparc64/utrap.h b/include/asm-sparc64/utrap.h
index 81b0ebf..e49e5c4 100644
--- a/include/asm-sparc64/utrap.h
+++ b/include/asm-sparc64/utrap.h
@@ -1,4 +1,4 @@
-/* $Id: utrap.h,v 1.1 1997/10/14 16:21:31 jj Exp $
+/*
* include/asm-sparc64/utrap.h
*
* Copyright (C) 1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
diff --git a/include/asm-sparc64/watchdog.h b/include/asm-sparc64/watchdog.h
index 4d5b03b..5baf2d3 100644
--- a/include/asm-sparc64/watchdog.h
+++ b/include/asm-sparc64/watchdog.h
@@ -1,4 +1,4 @@
-/* $Id: watchdog.h,v 1.1 2001/01/18 04:47:44 davem Exp $
+/*
*
* watchdog - Driver interface for the hardware watchdog timers
* present on Sun Microsystems boardsets
diff --git a/include/asm-um/irq.h b/include/asm-um/irq.h
index de389a4..4a2037f 100644
--- a/include/asm-um/irq.h
+++ b/include/asm-um/irq.h
@@ -15,8 +15,9 @@
#define SIGIO_WRITE_IRQ 11
#define TELNETD_IRQ 12
#define XTERM_IRQ 13
+#define RANDOM_IRQ 14
-#define LAST_IRQ XTERM_IRQ
+#define LAST_IRQ RANDOM_IRQ
#define NR_IRQS (LAST_IRQ + 1)
#endif
diff --git a/include/asm-um/keyboard.h b/include/asm-um/keyboard.h
deleted file mode 100644
index ee2e230..0000000
--- a/include/asm-um/keyboard.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __UM_KEYBOARD_H
-#define __UM_KEYBOARD_H
-
-#include "asm/arch/keyboard.h"
-
-#endif
diff --git a/include/asm-um/mmu_context.h b/include/asm-um/mmu_context.h
index 6686fc5..54f42e8 100644
--- a/include/asm-um/mmu_context.h
+++ b/include/asm-um/mmu_context.h
@@ -22,16 +22,10 @@
static inline void activate_mm(struct mm_struct *old, struct mm_struct *new)
{
/*
- * This is called by fs/exec.c and fs/aio.c. In the first case, for an
- * exec, we don't need to do anything as we're called from userspace
- * and thus going to use a new host PID. In the second, we're called
- * from a kernel thread, and thus need to go doing the mmap's on the
- * host. Since they're very expensive, we want to avoid that as far as
- * possible.
+ * This is called by fs/exec.c and sys_unshare()
+ * when the new ->mm is used for the first time.
*/
- if (old != new && (current->flags & PF_BORROWED_MM))
- __switch_mm(&new->context.id);
-
+ __switch_mm(&new->context.id);
arch_dup_mmap(old, new);
}
diff --git a/include/asm-um/page.h b/include/asm-um/page.h
index 381f96b..916e1a6 100644
--- a/include/asm-um/page.h
+++ b/include/asm-um/page.h
@@ -7,16 +7,20 @@
#ifndef __UM_PAGE_H
#define __UM_PAGE_H
+#include <linux/const.h>
+
+/* PAGE_SHIFT determines the page size */
+#define PAGE_SHIFT 12
+#define PAGE_SIZE (_AC(1, UL) << PAGE_SHIFT)
+#define PAGE_MASK (~(PAGE_SIZE-1))
+
+#ifndef __ASSEMBLY__
+
struct page;
#include <linux/types.h>
#include <asm/vm-flags.h>
-/* PAGE_SHIFT determines the page size */
-#define PAGE_SHIFT 12
-#define PAGE_SIZE (1UL << PAGE_SHIFT)
-#define PAGE_MASK (~(PAGE_SIZE-1))
-
/*
* These are used to make use of C type-checking..
*/
@@ -120,4 +124,5 @@
#include <asm-generic/memory_model.h>
#include <asm-generic/page.h>
-#endif
+#endif /* __ASSEMBLY__ */
+#endif /* __UM_PAGE_H */
diff --git a/include/asm-um/param.h b/include/asm-um/param.h
index 4cd4a22..e44f4e6 100644
--- a/include/asm-um/param.h
+++ b/include/asm-um/param.h
@@ -13,6 +13,8 @@
#define HZ CONFIG_HZ
#define USER_HZ 100 /* .. some user interfaces are in "ticks" */
#define CLOCKS_PER_SEC (USER_HZ) /* frequency at which times() counts */
+#else
+#define HZ 100
#endif
#endif
diff --git a/include/asm-v850/clinkage.h b/include/asm-v850/clinkage.h
index 2b622ad..c389691 100644
--- a/include/asm-v850/clinkage.h
+++ b/include/asm-v850/clinkage.h
@@ -11,7 +11,7 @@
* Written by Miles Bader <miles@gnu.org>
*/
-#ifndef __CLINKAGE_H__
+#ifndef __V850_CLINKAGE_H__
#define __V850_CLINKAGE_H__
#include <asm/macrology.h>
diff --git a/include/asm-v850/param.h b/include/asm-v850/param.h
index 2818326..4391f5f 100644
--- a/include/asm-v850/param.h
+++ b/include/asm-v850/param.h
@@ -26,6 +26,8 @@
# define HZ CONFIG_HZ
# define USER_HZ 100
# define CLOCKS_PER_SEC USER_HZ
+#else
+# define HZ 100
#endif
#endif /* __V850_PARAM_H__ */
diff --git a/include/asm-x86/i387.h b/include/asm-x86/i387.h
index 6b722d3..37672f7 100644
--- a/include/asm-x86/i387.h
+++ b/include/asm-x86/i387.h
@@ -193,6 +193,8 @@
#else /* CONFIG_X86_32 */
+extern void finit(void);
+
static inline void tolerant_fwait(void)
{
asm volatile("fnclex ; fwait");
diff --git a/include/asm-x86/kvm_x86_emulate.h b/include/asm-x86/kvm_x86_emulate.h
index d6337f94..b877bbd 100644
--- a/include/asm-x86/kvm_x86_emulate.h
+++ b/include/asm-x86/kvm_x86_emulate.h
@@ -135,6 +135,7 @@
u8 modrm_rm;
u8 use_modrm_ea;
unsigned long modrm_ea;
+ void *modrm_ptr;
unsigned long modrm_val;
struct fetch_cache fetch;
};
diff --git a/include/asm-x86/page.h b/include/asm-x86/page.h
index b381f4a..dc936dd 100644
--- a/include/asm-x86/page.h
+++ b/include/asm-x86/page.h
@@ -10,8 +10,16 @@
#ifdef __KERNEL__
-#define PHYSICAL_PAGE_MASK (PAGE_MASK & __PHYSICAL_MASK)
-#define PTE_MASK (_AT(long, PHYSICAL_PAGE_MASK))
+#define __PHYSICAL_MASK ((phys_addr_t)(1ULL << __PHYSICAL_MASK_SHIFT) - 1)
+#define __VIRTUAL_MASK ((1UL << __VIRTUAL_MASK_SHIFT) - 1)
+
+/* Cast PAGE_MASK to a signed type so that it is sign-extended if
+ virtual addresses are 32-bits but physical addresses are larger
+ (ie, 32-bit PAE). */
+#define PHYSICAL_PAGE_MASK (((signed long)PAGE_MASK) & __PHYSICAL_MASK)
+
+/* PTE_MASK extracts the PFN from a (pte|pmd|pud|pgd)val_t */
+#define PTE_MASK ((pteval_t)PHYSICAL_PAGE_MASK)
#define PMD_PAGE_SIZE (_AC(1, UL) << PMD_SHIFT)
#define PMD_PAGE_MASK (~(PMD_PAGE_SIZE-1))
@@ -24,9 +32,6 @@
/* to align the pointer to the (next) page boundary */
#define PAGE_ALIGN(addr) (((addr)+PAGE_SIZE-1)&PAGE_MASK)
-#define __PHYSICAL_MASK _AT(phys_addr_t, (_AC(1,ULL) << __PHYSICAL_MASK_SHIFT) - 1)
-#define __VIRTUAL_MASK ((_AC(1,UL) << __VIRTUAL_MASK_SHIFT) - 1)
-
#ifndef __ASSEMBLY__
#include <linux/types.h>
#endif
diff --git a/include/asm-x86/pgtable-3level.h b/include/asm-x86/pgtable-3level.h
index 8b4a9d4..c93dbb6 100644
--- a/include/asm-x86/pgtable-3level.h
+++ b/include/asm-x86/pgtable-3level.h
@@ -120,9 +120,9 @@
write_cr3(pgd);
}
-#define pud_page(pud) ((struct page *) __va(pud_val(pud) & PAGE_MASK))
+#define pud_page(pud) ((struct page *) __va(pud_val(pud) & PTE_MASK))
-#define pud_page_vaddr(pud) ((unsigned long) __va(pud_val(pud) & PAGE_MASK))
+#define pud_page_vaddr(pud) ((unsigned long) __va(pud_val(pud) & PTE_MASK))
/* Find an entry in the second-level page table.. */
@@ -160,7 +160,7 @@
static inline unsigned long pte_pfn(pte_t pte)
{
- return (pte_val(pte) & ~_PAGE_NX) >> PAGE_SHIFT;
+ return (pte_val(pte) & PTE_MASK) >> PAGE_SHIFT;
}
/*
diff --git a/include/asm-x86/pgtable.h b/include/asm-x86/pgtable.h
index 801b31f..97c271b 100644
--- a/include/asm-x86/pgtable.h
+++ b/include/asm-x86/pgtable.h
@@ -57,7 +57,9 @@
#define _KERNPG_TABLE (_PAGE_PRESENT | _PAGE_RW | _PAGE_ACCESSED | \
_PAGE_DIRTY)
-#define _PAGE_CHG_MASK (PTE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY)
+/* Set of bits not changed in pte_modify */
+#define _PAGE_CHG_MASK (PTE_MASK | _PAGE_PCD | _PAGE_PWT | \
+ _PAGE_ACCESSED | _PAGE_DIRTY)
#define _PAGE_CACHE_MASK (_PAGE_PCD | _PAGE_PWT)
#define _PAGE_CACHE_WB (0)
@@ -288,13 +290,22 @@
* Chop off the NX bit (if present), and add the NX portion of
* the newprot (if present):
*/
- val &= _PAGE_CHG_MASK & ~_PAGE_NX;
- val |= pgprot_val(newprot) & __supported_pte_mask;
+ val &= _PAGE_CHG_MASK;
+ val |= pgprot_val(newprot) & (~_PAGE_CHG_MASK) & __supported_pte_mask;
return __pte(val);
}
-#define pte_pgprot(x) __pgprot(pte_val(x) & (0xfff | _PAGE_NX))
+/* mprotect needs to preserve PAT bits when updating vm_page_prot */
+#define pgprot_modify pgprot_modify
+static inline pgprot_t pgprot_modify(pgprot_t oldprot, pgprot_t newprot)
+{
+ pgprotval_t preservebits = pgprot_val(oldprot) & _PAGE_CHG_MASK;
+ pgprotval_t addbits = pgprot_val(newprot);
+ return __pgprot(preservebits | addbits);
+}
+
+#define pte_pgprot(x) __pgprot(pte_val(x) & ~PTE_MASK)
#define canon_pgprot(p) __pgprot(pgprot_val(p) & __supported_pte_mask)
diff --git a/include/asm-x86/pgtable_32.h b/include/asm-x86/pgtable_32.h
index d7f0403..32ca031 100644
--- a/include/asm-x86/pgtable_32.h
+++ b/include/asm-x86/pgtable_32.h
@@ -88,7 +88,7 @@
/* To avoid harmful races, pmd_none(x) should check only the lower when PAE */
#define pmd_none(x) (!(unsigned long)pmd_val((x)))
#define pmd_present(x) (pmd_val((x)) & _PAGE_PRESENT)
-#define pmd_bad(x) ((pmd_val(x) & (~PAGE_MASK & ~_PAGE_USER)) != _KERNPG_TABLE)
+#define pmd_bad(x) ((pmd_val(x) & (~PTE_MASK & ~_PAGE_USER)) != _KERNPG_TABLE)
#define pages_to_mb(x) ((x) >> (20-PAGE_SHIFT))
@@ -159,7 +159,7 @@
#define pmd_page(pmd) (pfn_to_page(pmd_val((pmd)) >> PAGE_SHIFT))
#define pmd_page_vaddr(pmd) \
- ((unsigned long)__va(pmd_val((pmd)) & PAGE_MASK))
+ ((unsigned long)__va(pmd_val((pmd)) & PTE_MASK))
#if defined(CONFIG_HIGHPTE)
#define pte_offset_map(dir, address) \
diff --git a/include/asm-x86/pgtable_64.h b/include/asm-x86/pgtable_64.h
index efe83dc..1cc50d2 100644
--- a/include/asm-x86/pgtable_64.h
+++ b/include/asm-x86/pgtable_64.h
@@ -151,19 +151,19 @@
#ifndef __ASSEMBLY__
-static inline unsigned long pgd_bad(pgd_t pgd)
+static inline int pgd_bad(pgd_t pgd)
{
- return pgd_val(pgd) & ~(PTE_MASK | _KERNPG_TABLE | _PAGE_USER);
+ return (pgd_val(pgd) & ~(PTE_MASK | _PAGE_USER)) != _KERNPG_TABLE;
}
-static inline unsigned long pud_bad(pud_t pud)
+static inline int pud_bad(pud_t pud)
{
- return pud_val(pud) & ~(PTE_MASK | _KERNPG_TABLE | _PAGE_USER);
+ return (pud_val(pud) & ~(PTE_MASK | _PAGE_USER)) != _KERNPG_TABLE;
}
-static inline unsigned long pmd_bad(pmd_t pmd)
+static inline int pmd_bad(pmd_t pmd)
{
- return pmd_val(pmd) & ~(PTE_MASK | _KERNPG_TABLE | _PAGE_USER);
+ return (pmd_val(pmd) & ~(PTE_MASK | _PAGE_USER)) != _KERNPG_TABLE;
}
#define pte_none(x) (!pte_val((x)))
diff --git a/include/asm-x86/tlbflush.h b/include/asm-x86/tlbflush.h
index 0c0674d..35c76ce 100644
--- a/include/asm-x86/tlbflush.h
+++ b/include/asm-x86/tlbflush.h
@@ -22,12 +22,23 @@
static inline void __native_flush_tlb_global(void)
{
- unsigned long cr4 = read_cr4();
+ unsigned long flags;
+ unsigned long cr4;
+ /*
+ * Read-modify-write to CR4 - protect it from preemption and
+ * from interrupts. (Use the raw variant because this code can
+ * be called from deep inside debugging code.)
+ */
+ raw_local_irq_save(flags);
+
+ cr4 = read_cr4();
/* clear PGE */
write_cr4(cr4 & ~X86_CR4_PGE);
/* write old PGE again and flush TLBs */
write_cr4(cr4);
+
+ raw_local_irq_restore(flags);
}
static inline void __native_flush_tlb_single(unsigned long addr)
diff --git a/include/asm-x86/xen/page.h b/include/asm-x86/xen/page.h
index 0179930..baf3a4d 100644
--- a/include/asm-x86/xen/page.h
+++ b/include/asm-x86/xen/page.h
@@ -127,7 +127,7 @@
static inline unsigned long pte_mfn(pte_t pte)
{
- return (pte.pte & ~_PAGE_NX) >> PAGE_SHIFT;
+ return (pte.pte & PTE_MASK) >> PAGE_SHIFT;
}
static inline pte_t mfn_pte(unsigned long page_nr, pgprot_t pgprot)
diff --git a/include/asm-xtensa/param.h b/include/asm-xtensa/param.h
index 82ad34d..ba03d5a 100644
--- a/include/asm-xtensa/param.h
+++ b/include/asm-xtensa/param.h
@@ -15,6 +15,8 @@
# define HZ CONFIG_HZ /* internal timer frequency */
# define USER_HZ 100 /* for user interfaces in "ticks" */
# define CLOCKS_PER_SEC (USER_HZ) /* frequnzy at which times() counts */
+#else
+# define HZ 100
#endif
#define EXEC_PAGESIZE 4096
diff --git a/include/linux/Kbuild b/include/linux/Kbuild
index b7d81b2..93b9885 100644
--- a/include/linux/Kbuild
+++ b/include/linux/Kbuild
@@ -92,7 +92,6 @@
header-y += if_strip.h
header-y += if_tun.h
header-y += if_tunnel.h
-header-y += in6.h
header-y += in_route.h
header-y += ioctl.h
header-y += ip6_tunnel.h
@@ -105,7 +104,6 @@
header-y += jffs2.h
header-y += keyctl.h
header-y += limits.h
-header-y += dlm_plock.h
header-y += magic.h
header-y += major.h
header-y += matroxfb.h
@@ -190,6 +188,7 @@
unifdef-y += dccp.h
unifdef-y += dirent.h
unifdef-y += dlm.h
+unifdef-y += dlm_plock.h
unifdef-y += edd.h
unifdef-y += elf.h
unifdef-y += elfcore.h
@@ -236,6 +235,7 @@
unifdef-y += igmp.h
unifdef-y += inet_diag.h
unifdef-y += in.h
+unifdef-y += in6.h
unifdef-y += inotify.h
unifdef-y += input.h
unifdef-y += ip.h
diff --git a/include/linux/atm.h b/include/linux/atm.h
index 60136684..c791ddd 100644
--- a/include/linux/atm.h
+++ b/include/linux/atm.h
@@ -16,14 +16,11 @@
* documentation. Do not change them.
*/
-#ifdef __KERNEL__
-#include <linux/socket.h>
-#include <linux/types.h>
-#endif
#include <linux/compiler.h>
#include <linux/atmapi.h>
#include <linux/atmsap.h>
#include <linux/atmioc.h>
+#include <linux/types.h>
/* general ATM constants */
@@ -212,7 +209,7 @@
char pub[ATM_E164_LEN+1]; /* public address (E.164) */
/* unused addresses must be bzero'ed */
char lij_type; /* role in LIJ call; one of ATM_LIJ* */
- uint32_t lij_id; /* LIJ call identifier */
+ __u32 lij_id; /* LIJ call identifier */
} sas_addr __ATM_API_ALIGN; /* SVC address */
};
diff --git a/include/linux/atm_tcp.h b/include/linux/atm_tcp.h
index 18787f9..375638f 100644
--- a/include/linux/atm_tcp.h
+++ b/include/linux/atm_tcp.h
@@ -8,11 +8,9 @@
#define LINUX_ATM_TCP_H
#include <linux/atmapi.h>
-
-#ifdef __KERNEL__
-#include <linux/types.h>
-#endif
+#include <linux/atm.h>
#include <linux/atmioc.h>
+#include <linux/types.h>
/*
@@ -20,9 +18,9 @@
*/
struct atmtcp_hdr {
- uint16_t vpi;
- uint16_t vci;
- uint32_t length; /* ... of data part */
+ __u16 vpi;
+ __u16 vci;
+ __u32 length; /* ... of data part */
};
/*
diff --git a/include/linux/binfmts.h b/include/linux/binfmts.h
index b512e48..ee0ed48 100644
--- a/include/linux/binfmts.h
+++ b/include/linux/binfmts.h
@@ -99,6 +99,7 @@
extern void compute_creds(struct linux_binprm *binprm);
extern int do_coredump(long signr, int exit_code, struct pt_regs * regs);
extern int set_binfmt(struct linux_binfmt *new);
+extern void free_bprm(struct linux_binprm *);
#endif /* __KERNEL__ */
#endif /* _LINUX_BINFMTS_H */
diff --git a/include/linux/bitmap.h b/include/linux/bitmap.h
index 43b406d..1abfe66 100644
--- a/include/linux/bitmap.h
+++ b/include/linux/bitmap.h
@@ -110,7 +110,6 @@
extern int bitmap_scnprintf(char *buf, unsigned int len,
const unsigned long *src, int nbits);
-extern int bitmap_scnprintf_len(unsigned int len);
extern int __bitmap_parse(const char *buf, unsigned int buflen, int is_user,
unsigned long *dst, int nbits);
extern int bitmap_parse_user(const char __user *ubuf, unsigned int ulen,
diff --git a/include/linux/bitrev.h b/include/linux/bitrev.h
index 05e540d..7ffe03f 100644
--- a/include/linux/bitrev.h
+++ b/include/linux/bitrev.h
@@ -10,6 +10,7 @@
return byte_rev_table[byte];
}
+extern u16 bitrev16(u16 in);
extern u32 bitrev32(u32 in);
#endif /* _LINUX_BITREV_H */
diff --git a/include/linux/blktrace_api.h b/include/linux/blktrace_api.h
index cfc3147..e3ef903 100644
--- a/include/linux/blktrace_api.h
+++ b/include/linux/blktrace_api.h
@@ -55,6 +55,7 @@
enum blktrace_notify {
__BLK_TN_PROCESS = 0, /* establish pid/name mapping */
__BLK_TN_TIMESTAMP, /* include system clock */
+ __BLK_TN_MESSAGE, /* Character string message */
};
@@ -79,6 +80,7 @@
#define BLK_TN_PROCESS (__BLK_TN_PROCESS | BLK_TC_ACT(BLK_TC_NOTIFY))
#define BLK_TN_TIMESTAMP (__BLK_TN_TIMESTAMP | BLK_TC_ACT(BLK_TC_NOTIFY))
+#define BLK_TN_MESSAGE (__BLK_TN_MESSAGE | BLK_TC_ACT(BLK_TC_NOTIFY))
#define BLK_IO_TRACE_MAGIC 0x65617400
#define BLK_IO_TRACE_VERSION 0x07
@@ -119,6 +121,7 @@
int trace_state;
struct rchan *rchan;
unsigned long *sequence;
+ unsigned char *msg_data;
u16 act_mask;
u64 start_lba;
u64 end_lba;
@@ -149,7 +152,28 @@
extern void __blk_add_trace(struct blk_trace *, sector_t, int, int, u32, int, int, void *);
extern int do_blk_trace_setup(struct request_queue *q,
char *name, dev_t dev, struct blk_user_trace_setup *buts);
+extern void __trace_note_message(struct blk_trace *, const char *fmt, ...);
+/**
+ * blk_add_trace_msg - Add a (simple) message to the blktrace stream
+ * @q: queue the io is for
+ * @fmt: format to print message in
+ * args... Variable argument list for format
+ *
+ * Description:
+ * Records a (simple) message onto the blktrace stream.
+ *
+ * NOTE: BLK_TN_MAX_MSG characters are output at most.
+ * NOTE: Can not use 'static inline' due to presence of var args...
+ *
+ **/
+#define blk_add_trace_msg(q, fmt, ...) \
+ do { \
+ struct blk_trace *bt = (q)->blk_trace; \
+ if (unlikely(bt)) \
+ __trace_note_message(bt, fmt, ##__VA_ARGS__); \
+ } while (0)
+#define BLK_TN_MAX_MSG 128
/**
* blk_add_trace_rq - Add a trace for a request oriented action
@@ -299,6 +323,8 @@
#define blk_trace_setup(q, name, dev, arg) (-ENOTTY)
#define blk_trace_startstop(q, start) (-ENOTTY)
#define blk_trace_remove(q) (-ENOTTY)
+#define blk_add_trace_msg(q, fmt, ...) do { } while (0)
+
#endif /* CONFIG_BLK_DEV_IO_TRACE */
#endif /* __KERNEL__ */
#endif
diff --git a/include/linux/capability.h b/include/linux/capability.h
index f4ea0dd9a..fa830f8 100644
--- a/include/linux/capability.h
+++ b/include/linux/capability.h
@@ -31,11 +31,11 @@
#define _LINUX_CAPABILITY_VERSION_1 0x19980330
#define _LINUX_CAPABILITY_U32S_1 1
-#define _LINUX_CAPABILITY_VERSION_2 0x20071026
+#define _LINUX_CAPABILITY_VERSION_2 0x20071026 /* deprecated - use v3 */
#define _LINUX_CAPABILITY_U32S_2 2
-#define _LINUX_CAPABILITY_VERSION _LINUX_CAPABILITY_VERSION_2
-#define _LINUX_CAPABILITY_U32S _LINUX_CAPABILITY_U32S_2
+#define _LINUX_CAPABILITY_VERSION_3 0x20080522
+#define _LINUX_CAPABILITY_U32S_3 2
typedef struct __user_cap_header_struct {
__u32 version;
@@ -77,10 +77,23 @@
} data[VFS_CAP_U32];
};
-#ifdef __KERNEL__
+#ifndef __KERNEL__
+
+/*
+ * Backwardly compatible definition for source code - trapped in a
+ * 32-bit world. If you find you need this, please consider using
+ * libcap to untrap yourself...
+ */
+#define _LINUX_CAPABILITY_VERSION _LINUX_CAPABILITY_VERSION_1
+#define _LINUX_CAPABILITY_U32S _LINUX_CAPABILITY_U32S_1
+
+#else
+
+#define _KERNEL_CAPABILITY_VERSION _LINUX_CAPABILITY_VERSION_3
+#define _KERNEL_CAPABILITY_U32S _LINUX_CAPABILITY_U32S_3
typedef struct kernel_cap_struct {
- __u32 cap[_LINUX_CAPABILITY_U32S];
+ __u32 cap[_KERNEL_CAPABILITY_U32S];
} kernel_cap_t;
#define _USER_CAP_HEADER_SIZE (sizeof(struct __user_cap_header_struct))
@@ -351,7 +364,7 @@
*/
#define CAP_FOR_EACH_U32(__capi) \
- for (__capi = 0; __capi < _LINUX_CAPABILITY_U32S; ++__capi)
+ for (__capi = 0; __capi < _KERNEL_CAPABILITY_U32S; ++__capi)
# define CAP_FS_MASK_B0 (CAP_TO_MASK(CAP_CHOWN) \
| CAP_TO_MASK(CAP_DAC_OVERRIDE) \
@@ -361,7 +374,7 @@
# define CAP_FS_MASK_B1 (CAP_TO_MASK(CAP_MAC_OVERRIDE))
-#if _LINUX_CAPABILITY_U32S != 2
+#if _KERNEL_CAPABILITY_U32S != 2
# error Fix up hand-coded capability macro initializers
#else /* HAND-CODED capability initializers */
@@ -372,7 +385,7 @@
# define CAP_NFSD_SET ((kernel_cap_t){{ CAP_FS_MASK_B0|CAP_TO_MASK(CAP_SYS_RESOURCE), \
CAP_FS_MASK_B1 } })
-#endif /* _LINUX_CAPABILITY_U32S != 2 */
+#endif /* _KERNEL_CAPABILITY_U32S != 2 */
#define CAP_INIT_INH_SET CAP_EMPTY_SET
diff --git a/include/linux/cpuidle.h b/include/linux/cpuidle.h
index 51e6b1e..dcf77fa 100644
--- a/include/linux/cpuidle.h
+++ b/include/linux/cpuidle.h
@@ -82,6 +82,7 @@
};
struct cpuidle_device {
+ unsigned int registered:1;
unsigned int enabled:1;
unsigned int cpu;
diff --git a/include/linux/cpumask.h b/include/linux/cpumask.h
index 9650806..5df3db5 100644
--- a/include/linux/cpumask.h
+++ b/include/linux/cpumask.h
@@ -289,13 +289,6 @@
return bitmap_scnprintf(buf, len, srcp->bits, nbits);
}
-#define cpumask_scnprintf_len(len) \
- __cpumask_scnprintf_len((len))
-static inline int __cpumask_scnprintf_len(int len)
-{
- return bitmap_scnprintf_len(len);
-}
-
#define cpumask_parse_user(ubuf, ulen, dst) \
__cpumask_parse_user((ubuf), (ulen), &(dst), NR_CPUS)
static inline int __cpumask_parse_user(const char __user *buf, int len,
diff --git a/include/linux/device.h b/include/linux/device.h
index 8c23e3d..6a2d04c 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -183,7 +183,6 @@
struct module *owner;
struct kset subsys;
- struct list_head children;
struct list_head devices;
struct list_head interfaces;
struct kset class_dirs;
@@ -386,6 +385,9 @@
return dev->bus_id;
}
+extern int dev_set_name(struct device *dev, const char *name, ...)
+ __attribute__((format(printf, 2, 3)));
+
#ifdef CONFIG_NUMA
static inline int dev_to_node(struct device *dev)
{
@@ -450,9 +452,21 @@
/*
* Easy functions for dynamically creating devices on the fly
*/
+extern struct device *device_create_vargs(struct class *cls,
+ struct device *parent,
+ dev_t devt,
+ void *drvdata,
+ const char *fmt,
+ va_list vargs);
extern struct device *device_create(struct class *cls, struct device *parent,
dev_t devt, const char *fmt, ...)
__attribute__((format(printf, 4, 5)));
+extern struct device *device_create_drvdata(struct class *cls,
+ struct device *parent,
+ dev_t devt,
+ void *drvdata,
+ const char *fmt, ...)
+ __attribute__((format(printf, 5, 6)));
extern void device_destroy(struct class *cls, dev_t devt);
/*
diff --git a/include/linux/fdtable.h b/include/linux/fdtable.h
index a118f3c..4aab6f1 100644
--- a/include/linux/fdtable.h
+++ b/include/linux/fdtable.h
@@ -93,6 +93,7 @@
void put_files_struct(struct files_struct *fs);
void reset_files_struct(struct files_struct *);
int unshare_files(struct files_struct **);
+struct files_struct *dup_fd(struct files_struct *, int *);
extern struct kmem_cache *files_cachep;
diff --git a/include/linux/fs.h b/include/linux/fs.h
index f413085..d490779 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -2000,7 +2000,10 @@
extern int simple_pin_fs(struct file_system_type *, struct vfsmount **mount, int *count);
extern void simple_release_fs(struct vfsmount **mount, int *count);
-extern ssize_t simple_read_from_buffer(void __user *, size_t, loff_t *, const void *, size_t);
+extern ssize_t simple_read_from_buffer(void __user *to, size_t count,
+ loff_t *ppos, const void *from, size_t available);
+extern ssize_t memory_read_from_buffer(void *to, size_t count, loff_t *ppos,
+ const void *from, size_t available);
#ifdef CONFIG_MIGRATION
extern int buffer_migrate_page(struct address_space *,
diff --git a/include/linux/fuse.h b/include/linux/fuse.h
index 5c86f11..d482821 100644
--- a/include/linux/fuse.h
+++ b/include/linux/fuse.h
@@ -109,6 +109,7 @@
#define FUSE_POSIX_LOCKS (1 << 1)
#define FUSE_FILE_OPS (1 << 2)
#define FUSE_ATOMIC_O_TRUNC (1 << 3)
+#define FUSE_BIG_WRITES (1 << 5)
/**
* Release flags
diff --git a/include/linux/genhd.h b/include/linux/genhd.h
index e9874e7..ae7aec3 100644
--- a/include/linux/genhd.h
+++ b/include/linux/genhd.h
@@ -525,7 +525,7 @@
#define ADDPART_FLAG_RAID 1
#define ADDPART_FLAG_WHOLEDISK 2
-extern dev_t blk_lookup_devt(const char *name);
+extern dev_t blk_lookup_devt(const char *name, int part);
extern char *disk_name (struct gendisk *hd, int part, char *buf);
extern int rescan_partitions(struct gendisk *disk, struct block_device *bdev);
@@ -553,7 +553,7 @@
static inline void printk_all_partitions(void) { }
-static inline dev_t blk_lookup_devt(const char *name)
+static inline dev_t blk_lookup_devt(const char *name, int part)
{
dev_t devt = MKDEV(0, 0);
return devt;
diff --git a/include/linux/gpio.h b/include/linux/gpio.h
index 4987a84..98be6c5 100644
--- a/include/linux/gpio.h
+++ b/include/linux/gpio.h
@@ -8,6 +8,9 @@
#else
+#include <linux/types.h>
+#include <linux/errno.h>
+
/*
* Some platforms don't support the GPIO programming interface.
*
diff --git a/include/linux/hid.h b/include/linux/hid.h
index 4ce3b7a..fe56b86 100644
--- a/include/linux/hid.h
+++ b/include/linux/hid.h
@@ -2,8 +2,6 @@
#define __HID_H
/*
- * $Id: hid.h,v 1.24 2001/12/27 10:37:41 vojtech Exp $
- *
* Copyright (c) 1999 Andreas Gal
* Copyright (c) 2000-2001 Vojtech Pavlik
* Copyright (c) 2006-2007 Jiri Kosina
@@ -285,6 +283,7 @@
#define HID_QUIRK_HWHEEL_WHEEL_INVERT 0x04000000
#define HID_QUIRK_MICROSOFT_KEYS 0x08000000
#define HID_QUIRK_FULLSPEED_INTERVAL 0x10000000
+#define HID_QUIRK_APPLE_NUMLOCK_EMULATION 0x20000000
/*
* Separate quirks for runtime report descriptor fixup
diff --git a/include/linux/hiddev.h b/include/linux/hiddev.h
index acbdae6..a416b90 100644
--- a/include/linux/hiddev.h
+++ b/include/linux/hiddev.h
@@ -2,8 +2,6 @@
#define _HIDDEV_H
/*
- * $Id: hiddev.h,v 1.2 2001/04/26 11:26:09 vojtech Exp $
- *
* Copyright (c) 1999-2000 Vojtech Pavlik
*
* Sponsored by SuSE
diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index 6716ec8..fb9af6a 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -155,8 +155,6 @@
* @driver: device's driver, hence pointer to access routines
* @dev: Driver model device node for the slave.
* @irq: indicates the IRQ generated by this device (if any)
- * @driver_name: Identifies new-style driver used with this device; also
- * used as the module name for hotplug/coldplug modprobe support.
* @list: list of active/busy clients (DEPRECATED)
* @released: used to synchronize client releases & detaches and references
*
@@ -174,7 +172,6 @@
struct i2c_driver *driver; /* and our access routines */
struct device dev; /* the device structure */
int irq; /* irq issued by device (or -1) */
- char driver_name[KOBJ_NAME_LEN];
struct list_head list; /* DEPRECATED */
struct completion released;
};
@@ -200,8 +197,7 @@
/**
* struct i2c_board_info - template for device creation
- * @driver_name: identifies the driver to be bound to the device
- * @type: optional chip type information, to initialize i2c_client.name
+ * @type: chip type, to initialize i2c_client.name
* @flags: to initialize i2c_client.flags
* @addr: stored in i2c_client.addr
* @platform_data: stored in i2c_client.dev.platform_data
@@ -220,7 +216,6 @@
* with the adapter already known.
*/
struct i2c_board_info {
- char driver_name[KOBJ_NAME_LEN];
char type[I2C_NAME_SIZE];
unsigned short flags;
unsigned short addr;
diff --git a/include/linux/i2c/pcf857x.h b/include/linux/i2c/pcf857x.h
index ba8ea6e..0767a2a 100644
--- a/include/linux/i2c/pcf857x.h
+++ b/include/linux/i2c/pcf857x.h
@@ -12,8 +12,7 @@
* @context: optional parameter passed to setup() and teardown()
*
* In addition to the I2C_BOARD_INFO() state appropriate to each chip,
- * the i2c_board_info used with the pcf875x driver must provide the
- * chip "type" ("pcf8574", "pcf8574a", "pcf8575", "pcf8575c") and its
+ * the i2c_board_info used with the pcf875x driver must provide its
* platform_data (pointer to one of these structures) with at least
* the gpio_base value initialized.
*
diff --git a/include/linux/ide.h b/include/linux/ide.h
index b0135b0..9918772 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -153,7 +153,7 @@
ide_qd65xx, ide_umc8672, ide_ht6560b,
ide_rz1000, ide_trm290,
ide_cmd646, ide_cy82c693, ide_4drives,
- ide_pmac, ide_etrax100, ide_acorn,
+ ide_pmac, ide_acorn,
ide_au1xxx, ide_palm3710
};
@@ -965,7 +965,6 @@
void ide_tf_dump(const char *, struct ide_taskfile *);
extern void SELECT_DRIVE(ide_drive_t *);
-extern void SELECT_MASK(ide_drive_t *, int);
extern int drive_is_ready(ide_drive_t *);
@@ -1058,8 +1057,8 @@
IDE_HFLAG_NO_SET_MODE = (1 << 9),
/* trust BIOS for programming chipset/device for DMA */
IDE_HFLAG_TRUST_BIOS_FOR_DMA = (1 << 10),
- /* host uses VDMA (tied with IDE_HFLAG_CS5520 for now) */
- IDE_HFLAG_VDMA = (1 << 11),
+ /* host is CS5510/CS5520 */
+ IDE_HFLAG_CS5520 = (1 << 11),
/* ATAPI DMA is unsupported */
IDE_HFLAG_NO_ATAPI_DMA = (1 << 12),
/* set if host is a "non-bootable" controller */
@@ -1070,8 +1069,6 @@
IDE_HFLAG_NO_AUTODMA = (1 << 15),
/* host uses MMIO */
IDE_HFLAG_MMIO = (1 << 16),
- /* host is CS5510/CS5520 */
- IDE_HFLAG_CS5520 = IDE_HFLAG_VDMA,
/* no LBA48 */
IDE_HFLAG_NO_LBA48 = (1 << 17),
/* no LBA48 DMA */
@@ -1101,6 +1098,8 @@
IDE_HFLAG_NO_IO_32BIT = (1 << 30),
/* never unmask IRQs */
IDE_HFLAG_NO_UNMASK_IRQS = (1 << 31),
+ /* host uses VDMA (disabled for now) */
+ IDE_HFLAG_VDMA = 0,
};
#ifdef CONFIG_BLK_DEV_OFFBOARD
diff --git a/include/linux/in_route.h b/include/linux/in_route.h
index 61f25c3..b261b8c 100644
--- a/include/linux/in_route.h
+++ b/include/linux/in_route.h
@@ -10,19 +10,19 @@
#define RTCF_NOPMTUDISC RTM_F_NOPMTUDISC
#define RTCF_NOTIFY 0x00010000
-#define RTCF_DIRECTDST 0x00020000
+#define RTCF_DIRECTDST 0x00020000 /* unused */
#define RTCF_REDIRECTED 0x00040000
-#define RTCF_TPROXY 0x00080000
+#define RTCF_TPROXY 0x00080000 /* unused */
-#define RTCF_FAST 0x00200000
-#define RTCF_MASQ 0x00400000
-#define RTCF_SNAT 0x00800000
+#define RTCF_FAST 0x00200000 /* unused */
+#define RTCF_MASQ 0x00400000 /* unused */
+#define RTCF_SNAT 0x00800000 /* unused */
#define RTCF_DOREDIRECT 0x01000000
#define RTCF_DIRECTSRC 0x04000000
#define RTCF_DNAT 0x08000000
#define RTCF_BROADCAST 0x10000000
#define RTCF_MULTICAST 0x20000000
-#define RTCF_REJECT 0x40000000
+#define RTCF_REJECT 0x40000000 /* unused */
#define RTCF_LOCAL 0x80000000
#define RTCF_NAT (RTCF_DNAT|RTCF_SNAT)
diff --git a/include/linux/inetdevice.h b/include/linux/inetdevice.h
index 7009b0c..c6f51ad 100644
--- a/include/linux/inetdevice.h
+++ b/include/linux/inetdevice.h
@@ -117,7 +117,6 @@
__be32 ifa_address;
__be32 ifa_mask;
__be32 ifa_broadcast;
- __be32 ifa_anycast;
unsigned char ifa_scope;
unsigned char ifa_flags;
unsigned char ifa_prefixlen;
diff --git a/include/linux/init_task.h b/include/linux/init_task.h
index b24c287..9927a88 100644
--- a/include/linux/init_task.h
+++ b/include/linux/init_task.h
@@ -1,7 +1,6 @@
#ifndef _LINUX__INIT_TASK_H
#define _LINUX__INIT_TASK_H
-#include <linux/fdtable.h>
#include <linux/rcupdate.h>
#include <linux/irqflags.h>
#include <linux/utsname.h>
@@ -12,27 +11,7 @@
#include <linux/securebits.h>
#include <net/net_namespace.h>
-#define INIT_FDTABLE \
-{ \
- .max_fds = NR_OPEN_DEFAULT, \
- .fd = &init_files.fd_array[0], \
- .close_on_exec = (fd_set *)&init_files.close_on_exec_init, \
- .open_fds = (fd_set *)&init_files.open_fds_init, \
- .rcu = RCU_HEAD_INIT, \
- .next = NULL, \
-}
-
-#define INIT_FILES \
-{ \
- .count = ATOMIC_INIT(1), \
- .fdt = &init_files.fdtab, \
- .fdtab = INIT_FDTABLE, \
- .file_lock = __SPIN_LOCK_UNLOCKED(init_task.file_lock), \
- .next_fd = 0, \
- .close_on_exec_init = { { 0, } }, \
- .open_fds_init = { { 0, } }, \
- .fd_array = { NULL, } \
-}
+extern struct files_struct init_files;
#define INIT_KIOCTX(name, which_mm) \
{ \
diff --git a/include/linux/input.h b/include/linux/input.h
index 28a094f..e075c4b 100644
--- a/include/linux/input.h
+++ b/include/linux/input.h
@@ -637,7 +637,9 @@
#define SW_LID 0x00 /* set = lid shut */
#define SW_TABLET_MODE 0x01 /* set = tablet mode */
#define SW_HEADPHONE_INSERT 0x02 /* set = inserted */
-#define SW_RADIO 0x03 /* set = radio enabled */
+#define SW_RFKILL_ALL 0x03 /* rfkill master switch, type "any"
+ set = radio enabled */
+#define SW_RADIO SW_RFKILL_ALL /* deprecated */
#define SW_MAX 0x0f
#define SW_CNT (SW_MAX+1)
diff --git a/include/linux/ioport.h b/include/linux/ioport.h
index d5d40a9..c6801bf 100644
--- a/include/linux/ioport.h
+++ b/include/linux/ioport.h
@@ -53,14 +53,14 @@
#define IORESOURCE_AUTO 0x40000000
#define IORESOURCE_BUSY 0x80000000 /* Driver has marked this resource busy */
-/* ISA PnP IRQ specific bits (IORESOURCE_BITS) */
+/* PnP IRQ specific bits (IORESOURCE_BITS) */
#define IORESOURCE_IRQ_HIGHEDGE (1<<0)
#define IORESOURCE_IRQ_LOWEDGE (1<<1)
#define IORESOURCE_IRQ_HIGHLEVEL (1<<2)
#define IORESOURCE_IRQ_LOWLEVEL (1<<3)
#define IORESOURCE_IRQ_SHAREABLE (1<<4)
-/* ISA PnP DMA specific bits (IORESOURCE_BITS) */
+/* PnP DMA specific bits (IORESOURCE_BITS) */
#define IORESOURCE_DMA_TYPE_MASK (3<<0)
#define IORESOURCE_DMA_8BIT (0<<0)
#define IORESOURCE_DMA_8AND16BIT (1<<0)
@@ -76,7 +76,7 @@
#define IORESOURCE_DMA_TYPEB (2<<6)
#define IORESOURCE_DMA_TYPEF (3<<6)
-/* ISA PnP memory I/O specific bits (IORESOURCE_BITS) */
+/* PnP memory I/O specific bits (IORESOURCE_BITS) */
#define IORESOURCE_MEM_WRITEABLE (1<<0) /* dup: IORESOURCE_READONLY */
#define IORESOURCE_MEM_CACHEABLE (1<<1) /* dup: IORESOURCE_CACHEABLE */
#define IORESOURCE_MEM_RANGELENGTH (1<<2) /* dup: IORESOURCE_RANGELENGTH */
diff --git a/include/linux/ipv6.h b/include/linux/ipv6.h
index 10b666b..cde056e 100644
--- a/include/linux/ipv6.h
+++ b/include/linux/ipv6.h
@@ -396,8 +396,10 @@
{
struct request_sock *req = reqsk_alloc(ops);
- if (req != NULL)
+ if (req != NULL) {
inet_rsk(req)->inet6_rsk_offset = inet6_rsk_offset(req);
+ inet6_rsk(req)->pktopts = NULL;
+ }
return req;
}
diff --git a/include/linux/jbd2.h b/include/linux/jbd2.h
index 05e2b30..d147f0f 100644
--- a/include/linux/jbd2.h
+++ b/include/linux/jbd2.h
@@ -919,6 +919,9 @@
struct proc_dir_entry *j_proc_entry;
struct transaction_stats_s j_stats;
+ /* Failed journal commit ID */
+ unsigned int j_failed_commit;
+
/*
* An opaque pointer to fs-private information. ext3 puts its
* superblock pointer here
diff --git a/include/linux/kallsyms.h b/include/linux/kallsyms.h
index 82de2fb..00c1801 100644
--- a/include/linux/kallsyms.h
+++ b/include/linux/kallsyms.h
@@ -83,16 +83,6 @@
static inline void __check_printsym_format(const char *fmt, ...)
{
}
-/* ia64 and ppc64 use function descriptors, which contain the real address */
-#if defined(CONFIG_IA64) || defined(CONFIG_PPC64)
-#define print_fn_descriptor_symbol(fmt, addr) \
-do { \
- unsigned long *__faddr = (unsigned long*) addr; \
- print_symbol(fmt, __faddr[0]); \
-} while (0)
-#else
-#define print_fn_descriptor_symbol(fmt, addr) print_symbol(fmt, addr)
-#endif
static inline void print_symbol(const char *fmt, unsigned long addr)
{
@@ -101,6 +91,20 @@
__builtin_extract_return_addr((void *)addr));
}
+/*
+ * Pretty-print a function pointer.
+ *
+ * ia64 and ppc64 function pointers are really function descriptors,
+ * which contain a pointer the real address.
+ */
+static inline void print_fn_descriptor_symbol(const char *fmt, void *addr)
+{
+#if defined(CONFIG_IA64) || defined(CONFIG_PPC64)
+ addr = *(void **)addr;
+#endif
+ print_symbol(fmt, (unsigned long)addr);
+}
+
#ifndef CONFIG_64BIT
#define print_ip_sym(ip) \
do { \
diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index 4d46e29..792bf0a 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -276,7 +276,17 @@
const void *buf, size_t len, bool ascii);
extern void print_hex_dump_bytes(const char *prefix_str, int prefix_type,
const void *buf, size_t len);
-#define hex_asc(x) "0123456789abcdef"[x]
+
+extern const char hex_asc[];
+#define hex_asc_lo(x) hex_asc[((x) & 0x0f)]
+#define hex_asc_hi(x) hex_asc[((x) & 0xf0) >> 4]
+
+static inline char *pack_hex_byte(char *buf, u8 byte)
+{
+ *buf++ = hex_asc_hi(byte);
+ *buf++ = hex_asc_lo(byte);
+ return buf;
+}
#define pr_emerg(fmt, arg...) \
printk(KERN_EMERG fmt, ##arg)
diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h
index 3989789..092b1b2 100644
--- a/include/linux/kvm_host.h
+++ b/include/linux/kvm_host.h
@@ -297,7 +297,7 @@
return (gpa_t)gfn << PAGE_SHIFT;
}
-static inline void kvm_migrate_apic_timer(struct kvm_vcpu *vcpu)
+static inline void kvm_migrate_timers(struct kvm_vcpu *vcpu)
{
set_bit(KVM_REQ_MIGRATE_TIMER, &vcpu->requests);
}
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 0f17643..e57e5d0 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -111,13 +111,10 @@
/* various global constants */
LIBATA_MAX_PRD = ATA_MAX_PRD / 2,
LIBATA_DUMB_MAX_PRD = ATA_MAX_PRD / 4, /* Worst case */
- ATA_MAX_PORTS = 8,
ATA_DEF_QUEUE = 1,
/* tag ATA_MAX_QUEUE - 1 is reserved for internal commands */
ATA_MAX_QUEUE = 32,
ATA_TAG_INTERNAL = ATA_MAX_QUEUE - 1,
- ATA_MAX_BUS = 2,
- ATA_DEF_BUSY_WAIT = 10000,
ATA_SHORT_PAUSE = (HZ >> 6) + 1,
ATAPI_MAX_DRAIN = 16 << 10,
@@ -341,7 +338,7 @@
ATA_EH_PMP_TRIES = 5,
ATA_EH_PMP_LINK_TRIES = 3,
- SATA_PMP_SCR_TIMEOUT = 250,
+ SATA_PMP_RW_TIMEOUT = 3000, /* PMP read/write timeout */
/* Horkage types. May be set by libata or controller on drives
(some horkage may be drive/controller pair dependant */
@@ -351,7 +348,7 @@
ATA_HORKAGE_NONCQ = (1 << 2), /* Don't use NCQ */
ATA_HORKAGE_MAX_SEC_128 = (1 << 3), /* Limit max sects to 128 */
ATA_HORKAGE_BROKEN_HPA = (1 << 4), /* Broken HPA */
- ATA_HORKAGE_SKIP_PM = (1 << 5), /* Skip PM operations */
+ ATA_HORKAGE_DISABLE = (1 << 5), /* Disable it */
ATA_HORKAGE_HPA_SIZE = (1 << 6), /* native size off by one */
ATA_HORKAGE_IPM = (1 << 7), /* Link PM problems */
ATA_HORKAGE_IVB = (1 << 8), /* cbl det validity bit bugs */
@@ -821,8 +818,6 @@
unsigned short udma; /* t2CYCTYP/2 */
};
-#define FIT(v, vmin, vmax) max_t(short, min_t(short, v, vmax), vmin)
-
/*
* Core layer - drivers/ata/libata-core.c
*/
@@ -1437,7 +1432,8 @@
extern void ata_sff_dumb_qc_prep(struct ata_queued_cmd *qc);
extern void ata_sff_dev_select(struct ata_port *ap, unsigned int device);
extern u8 ata_sff_check_status(struct ata_port *ap);
-extern u8 ata_sff_altstatus(struct ata_port *ap);
+extern void ata_sff_pause(struct ata_port *ap);
+extern void ata_sff_dma_pause(struct ata_port *ap);
extern int ata_sff_busy_sleep(struct ata_port *ap,
unsigned long timeout_pat, unsigned long timeout);
extern int ata_sff_wait_ready(struct ata_link *link, unsigned long deadline);
@@ -1498,19 +1494,6 @@
#endif /* CONFIG_PCI */
/**
- * ata_sff_pause - Flush writes and pause 400 nanoseconds.
- * @ap: Port to wait for.
- *
- * LOCKING:
- * Inherited from caller.
- */
-static inline void ata_sff_pause(struct ata_port *ap)
-{
- ata_sff_altstatus(ap);
- ndelay(400);
-}
-
-/**
* ata_sff_busy_wait - Wait for a port status register
* @ap: Port to wait for.
* @bits: bits that must be clear
diff --git a/include/linux/math64.h b/include/linux/math64.h
index c1a5f81..c87f152 100644
--- a/include/linux/math64.h
+++ b/include/linux/math64.h
@@ -81,4 +81,25 @@
}
#endif
+u32 iter_div_u64_rem(u64 dividend, u32 divisor, u64 *remainder);
+
+static __always_inline u32
+__iter_div_u64_rem(u64 dividend, u32 divisor, u64 *remainder)
+{
+ u32 ret = 0;
+
+ while (dividend >= divisor) {
+ /* The following asm() prevents the compiler from
+ optimising this loop into a modulo operation. */
+ asm("" : "+rm"(dividend));
+
+ dividend -= divisor;
+ ret++;
+ }
+
+ *remainder = dividend;
+
+ return ret;
+}
+
#endif /* _LINUX_MATH64_H */
diff --git a/include/linux/memory_hotplug.h b/include/linux/memory_hotplug.h
index 73e3586..ea9f5ad 100644
--- a/include/linux/memory_hotplug.h
+++ b/include/linux/memory_hotplug.h
@@ -77,14 +77,6 @@
extern int __remove_pages(struct zone *zone, unsigned long start_pfn,
unsigned long nr_pages);
-/*
- * Walk through all memory which is registered as resource.
- * arg is (start_pfn, nr_pages, private_arg_pointer)
- */
-extern int walk_memory_resource(unsigned long start_pfn,
- unsigned long nr_pages, void *arg,
- int (*func)(unsigned long, unsigned long, void *));
-
#ifdef CONFIG_NUMA
extern int memory_add_physaddr_to_nid(u64 start);
#else
@@ -199,6 +191,14 @@
#endif /* ! CONFIG_MEMORY_HOTPLUG */
+/*
+ * Walk through all memory which is registered as resource.
+ * arg is (start_pfn, nr_pages, private_arg_pointer)
+ */
+extern int walk_memory_resource(unsigned long start_pfn,
+ unsigned long nr_pages, void *arg,
+ int (*func)(unsigned long, unsigned long, void *));
+
extern int add_memory(int nid, u64 start, u64 size);
extern int arch_add_memory(int nid, u64 start, u64 size);
extern int remove_memory(u64 start, u64 size);
diff --git a/include/linux/mm.h b/include/linux/mm.h
index c31a9cd..586a943 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -760,16 +760,17 @@
* (see walk_page_range for more details)
*/
struct mm_walk {
- int (*pgd_entry)(pgd_t *, unsigned long, unsigned long, void *);
- int (*pud_entry)(pud_t *, unsigned long, unsigned long, void *);
- int (*pmd_entry)(pmd_t *, unsigned long, unsigned long, void *);
- int (*pte_entry)(pte_t *, unsigned long, unsigned long, void *);
- int (*pte_hole)(unsigned long, unsigned long, void *);
+ int (*pgd_entry)(pgd_t *, unsigned long, unsigned long, struct mm_walk *);
+ int (*pud_entry)(pud_t *, unsigned long, unsigned long, struct mm_walk *);
+ int (*pmd_entry)(pmd_t *, unsigned long, unsigned long, struct mm_walk *);
+ int (*pte_entry)(pte_t *, unsigned long, unsigned long, struct mm_walk *);
+ int (*pte_hole)(unsigned long, unsigned long, struct mm_walk *);
+ struct mm_struct *mm;
+ void *private;
};
-int walk_page_range(const struct mm_struct *, unsigned long addr,
- unsigned long end, const struct mm_walk *walk,
- void *private);
+int walk_page_range(unsigned long addr, unsigned long end,
+ struct mm_walk *walk);
void free_pgd_range(struct mmu_gather **tlb, unsigned long addr,
unsigned long end, unsigned long floor, unsigned long ceiling);
void free_pgtables(struct mmu_gather **tlb, struct vm_area_struct *start_vma,
diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h
index eb7c16c..02a27ae 100644
--- a/include/linux/mm_types.h
+++ b/include/linux/mm_types.h
@@ -226,8 +226,17 @@
rwlock_t ioctx_list_lock; /* aio lock */
struct kioctx *ioctx_list;
#ifdef CONFIG_MM_OWNER
- struct task_struct *owner; /* The thread group leader that */
- /* owns the mm_struct. */
+ /*
+ * "owner" points to a task that is regarded as the canonical
+ * user/owner of this mm. All of the following must be true in
+ * order for it to be changed:
+ *
+ * current == mm->owner
+ * current->mm != mm
+ * new_owner->mm == mm
+ * new_owner->alloc_lock is held
+ */
+ struct task_struct *owner;
#endif
#ifdef CONFIG_PROC_FS
diff --git a/include/linux/mman.h b/include/linux/mman.h
index 87920a0..dab8892 100644
--- a/include/linux/mman.h
+++ b/include/linux/mman.h
@@ -17,14 +17,14 @@
extern int sysctl_overcommit_memory;
extern int sysctl_overcommit_ratio;
-extern atomic_t vm_committed_space;
+extern atomic_long_t vm_committed_space;
#ifdef CONFIG_SMP
extern void vm_acct_memory(long pages);
#else
static inline void vm_acct_memory(long pages)
{
- atomic_add(pages, &vm_committed_space);
+ atomic_long_add(pages, &vm_committed_space);
}
#endif
diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h
index c463cd8..443bc7c 100644
--- a/include/linux/mmzone.h
+++ b/include/linux/mmzone.h
@@ -703,7 +703,7 @@
extern struct zone *next_zone(struct zone *zone);
/**
- * for_each_pgdat - helper macro to iterate over all nodes
+ * for_each_online_pgdat - helper macro to iterate over all online nodes
* @pgdat - pointer to a pg_data_t variable
*/
#define for_each_online_pgdat(pgdat) \
diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h
index d73ecea..69b2342 100644
--- a/include/linux/mod_devicetable.h
+++ b/include/linux/mod_devicetable.h
@@ -375,7 +375,8 @@
struct i2c_device_id {
char name[I2C_NAME_SIZE];
- kernel_ulong_t driver_data; /* Data private to the driver */
+ kernel_ulong_t driver_data /* Data private to the driver */
+ __attribute__((aligned(sizeof(kernel_ulong_t))));
};
diff --git a/include/linux/msdos_fs.h b/include/linux/msdos_fs.h
index b03b274..81cd36b 100644
--- a/include/linux/msdos_fs.h
+++ b/include/linux/msdos_fs.h
@@ -57,12 +57,6 @@
#define MSDOS_DOT ". " /* ".", padded to MSDOS_NAME chars */
#define MSDOS_DOTDOT ".. " /* "..", padded to MSDOS_NAME chars */
-/* media of boot sector */
-static inline int fat_valid_media(u8 media)
-{
- return 0xf8 <= media || media == 0xf0;
-}
-
#define FAT_FIRST_ENT(s, x) ((MSDOS_SB(s)->fat_bits == 32 ? 0x0FFFFF00 : \
MSDOS_SB(s)->fat_bits == 16 ? 0xFF00 : 0xF00) | (x))
@@ -334,6 +328,12 @@
#endif
}
+/* media of boot sector */
+static inline int fat_valid_media(u8 media)
+{
+ return 0xf8 <= media || media == 0xf0;
+}
+
/* fat/cache.c */
extern void fat_cache_inval_inode(struct inode *inode);
extern int fat_get_cluster(struct inode *inode, int cluster,
diff --git a/include/linux/msg.h b/include/linux/msg.h
index 6f3b8e7..56abf155 100644
--- a/include/linux/msg.h
+++ b/include/linux/msg.h
@@ -64,11 +64,11 @@
#define MSGMNB 16384 /* <= INT_MAX */ /* default max size of a message queue */
/* unused */
-#define MSGPOOL (MSGMNI * MSGMNB) /* size in bytes of message pool */
+#define MSGPOOL (MSGMNI * MSGMNB / 1024) /* size in kbytes of message pool */
#define MSGTQL MSGMNB /* number of system message headers */
#define MSGMAP MSGMNB /* number of entries in message map */
#define MSGSSZ 16 /* message segment size */
-#define __MSGSEG (MSGPOOL / MSGSSZ) /* max no. of segments */
+#define __MSGSEG ((MSGPOOL * 1024) / MSGSSZ) /* max no. of segments */
#define MSGSEG (__MSGSEG <= 0xffff ? __MSGSEG : 0xffff)
#ifdef __KERNEL__
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index c42bc7f..53ea3dc 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -1,7 +1,7 @@
/*
* linux/include/linux/mtd/nand.h
*
- * Copyright (c) 2000 David Woodhouse <dwmw2@mvhi.com>
+ * Copyright (c) 2000 David Woodhouse <dwmw2@infradead.org>
* Steven J. Hill <sjhill@realitydiluted.com>
* Thomas Gleixner <tglx@linutronix.de>
*
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 7c1d446..f27fd20 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -93,14 +93,16 @@
* used.
*/
-#if !defined(CONFIG_AX25) && !defined(CONFIG_AX25_MODULE) && !defined(CONFIG_TR)
-#define LL_MAX_HEADER 32
+#if defined(CONFIG_WLAN_80211) || defined(CONFIG_AX25) || defined(CONFIG_AX25_MODULE)
+# if defined(CONFIG_MAC80211_MESH)
+# define LL_MAX_HEADER 128
+# else
+# define LL_MAX_HEADER 96
+# endif
+#elif defined(CONFIG_TR)
+# define LL_MAX_HEADER 48
#else
-#if defined(CONFIG_AX25) || defined(CONFIG_AX25_MODULE)
-#define LL_MAX_HEADER 96
-#else
-#define LL_MAX_HEADER 48
-#endif
+# define LL_MAX_HEADER 32
#endif
#if !defined(CONFIG_NET_IPIP) && !defined(CONFIG_NET_IPIP_MODULE) && \
@@ -244,11 +246,16 @@
*
* We could use other alignment values, but we must maintain the
* relationship HH alignment <= LL alignment.
+ *
+ * LL_ALLOCATED_SPACE also takes into account the tailroom the device
+ * may need.
*/
#define LL_RESERVED_SPACE(dev) \
- (((dev)->hard_header_len&~(HH_DATA_MOD - 1)) + HH_DATA_MOD)
+ ((((dev)->hard_header_len+(dev)->needed_headroom)&~(HH_DATA_MOD - 1)) + HH_DATA_MOD)
#define LL_RESERVED_SPACE_EXTRA(dev,extra) \
- ((((dev)->hard_header_len+extra)&~(HH_DATA_MOD - 1)) + HH_DATA_MOD)
+ ((((dev)->hard_header_len+(dev)->needed_headroom+(extra))&~(HH_DATA_MOD - 1)) + HH_DATA_MOD)
+#define LL_ALLOCATED_SPACE(dev) \
+ ((((dev)->hard_header_len+(dev)->needed_headroom+(dev)->needed_tailroom)&~(HH_DATA_MOD - 1)) + HH_DATA_MOD)
struct header_ops {
int (*create) (struct sk_buff *skb, struct net_device *dev,
@@ -567,6 +574,13 @@
unsigned short type; /* interface hardware type */
unsigned short hard_header_len; /* hardware hdr length */
+ /* extra head- and tailroom the hardware may need, but not in all cases
+ * can this be guaranteed, especially tailroom. Some cases also use
+ * LL_MAX_HEADER instead to allocate the skb.
+ */
+ unsigned short needed_headroom;
+ unsigned short needed_tailroom;
+
struct net_device *master; /* Pointer to master device of a group,
* which this device is member of.
*/
@@ -715,6 +729,9 @@
struct net *nd_net;
#endif
+ /* mid-layer private */
+ void *ml_priv;
+
/* bridge stuff */
struct net_bridge_port *br_port;
/* macvlan */
@@ -728,6 +745,9 @@
/* rtnetlink link ops */
const struct rtnl_link_ops *rtnl_link_ops;
+ /* VLAN feature mask */
+ unsigned long vlan_features;
+
/* for setting kernel sock attribute on TCP connection setup */
#define GSO_MAX_SIZE 65536
unsigned int gso_max_size;
diff --git a/include/linux/netfilter.h b/include/linux/netfilter.h
index e4c6659..0c5eb7e 100644
--- a/include/linux/netfilter.h
+++ b/include/linux/netfilter.h
@@ -3,7 +3,6 @@
#ifdef __KERNEL__
#include <linux/init.h>
-#include <linux/types.h>
#include <linux/skbuff.h>
#include <linux/net.h>
#include <linux/netdevice.h>
@@ -14,6 +13,7 @@
#include <linux/list.h>
#include <net/net_namespace.h>
#endif
+#include <linux/types.h>
#include <linux/compiler.h>
/* Responses from hook functions. */
diff --git a/include/linux/netfilter_arp/arp_tables.h b/include/linux/netfilter_arp/arp_tables.h
index dd9c97f..590ac3d 100644
--- a/include/linux/netfilter_arp/arp_tables.h
+++ b/include/linux/netfilter_arp/arp_tables.h
@@ -11,11 +11,11 @@
#ifdef __KERNEL__
#include <linux/if.h>
-#include <linux/types.h>
#include <linux/in.h>
#include <linux/if_arp.h>
#include <linux/skbuff.h>
#endif
+#include <linux/types.h>
#include <linux/compiler.h>
#include <linux/netfilter_arp.h>
diff --git a/include/linux/netfilter_ipv4/ip_tables.h b/include/linux/netfilter_ipv4/ip_tables.h
index bfc889f..092bd50 100644
--- a/include/linux/netfilter_ipv4/ip_tables.h
+++ b/include/linux/netfilter_ipv4/ip_tables.h
@@ -17,11 +17,11 @@
#ifdef __KERNEL__
#include <linux/if.h>
-#include <linux/types.h>
#include <linux/in.h>
#include <linux/ip.h>
#include <linux/skbuff.h>
#endif
+#include <linux/types.h>
#include <linux/compiler.h>
#include <linux/netfilter_ipv4.h>
diff --git a/include/linux/netfilter_ipv6/ip6_tables.h b/include/linux/netfilter_ipv6/ip6_tables.h
index f2507dc..1089e33 100644
--- a/include/linux/netfilter_ipv6/ip6_tables.h
+++ b/include/linux/netfilter_ipv6/ip6_tables.h
@@ -17,11 +17,11 @@
#ifdef __KERNEL__
#include <linux/if.h>
-#include <linux/types.h>
#include <linux/in6.h>
#include <linux/ipv6.h>
#include <linux/skbuff.h>
#endif
+#include <linux/types.h>
#include <linux/compiler.h>
#include <linux/netfilter_ipv6.h>
diff --git a/include/linux/page-flags.h b/include/linux/page-flags.h
index 590cff3..f31debf 100644
--- a/include/linux/page-flags.h
+++ b/include/linux/page-flags.h
@@ -306,5 +306,29 @@
}
#endif /* !PAGEFLAGS_EXTENDED */
+
+#define PAGE_FLAGS (1 << PG_lru | 1 << PG_private | 1 << PG_locked | \
+ 1 << PG_buddy | 1 << PG_writeback | \
+ 1 << PG_slab | 1 << PG_swapcache | 1 << PG_active)
+
+/*
+ * Flags checked in bad_page(). Pages on the free list should not have
+ * these flags set. It they are, there is a problem.
+ */
+#define PAGE_FLAGS_CLEAR_WHEN_BAD (PAGE_FLAGS | 1 << PG_reclaim | 1 << PG_dirty)
+
+/*
+ * Flags checked when a page is freed. Pages being freed should not have
+ * these flags set. It they are, there is a problem.
+ */
+#define PAGE_FLAGS_CHECK_AT_FREE (PAGE_FLAGS | 1 << PG_reserved)
+
+/*
+ * Flags checked when a page is prepped for return by the page allocator.
+ * Pages being prepped should not have these flags set. It they are, there
+ * is a problem.
+ */
+#define PAGE_FLAGS_CHECK_AT_PREP (PAGE_FLAGS | 1 << PG_reserved | 1 << PG_dirty)
+
#endif /* !__GENERATING_BOUNDS_H */
#endif /* PAGE_FLAGS_H */
diff --git a/include/linux/parser.h b/include/linux/parser.h
index 26b2bdf..7dcd050 100644
--- a/include/linux/parser.h
+++ b/include/linux/parser.h
@@ -29,5 +29,5 @@
int match_int(substring_t *, int *result);
int match_octal(substring_t *, int *result);
int match_hex(substring_t *, int *result);
-void match_strcpy(char *, const substring_t *);
+size_t match_strlcpy(char *, const substring_t *, size_t);
char *match_strdup(const substring_t *);
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 509159b..d18b1dd 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -206,6 +206,7 @@
struct bin_attribute *rom_attr; /* attribute descriptor for sysfs ROM entry */
int rom_attr_enabled; /* has display of the rom attribute been enabled? */
struct bin_attribute *res_attr[DEVICE_COUNT_RESOURCE]; /* sysfs file for resources */
+ struct bin_attribute *res_attr_wc[DEVICE_COUNT_RESOURCE]; /* sysfs file for WC mapping of resources */
#ifdef CONFIG_PCI_MSI
struct list_head msi_list;
#endif
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index cf6dbd75..eafc9d6 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -716,6 +716,7 @@
#define PCI_DEVICE_ID_HP_CISSA 0x3220
#define PCI_DEVICE_ID_HP_CISSC 0x3230
#define PCI_DEVICE_ID_HP_CISSD 0x3238
+#define PCI_DEVICE_ID_HP_CISSE 0x323a
#define PCI_DEVICE_ID_HP_ZX2_IOC 0x4031
#define PCI_VENDOR_ID_PCTECH 0x1042
@@ -1761,6 +1762,7 @@
#define PCI_VENDOR_ID_INTASHIELD 0x135a
#define PCI_DEVICE_ID_INTASHIELD_IS200 0x0d80
+#define PCI_DEVICE_ID_INTASHIELD_IS400 0x0dc0
#define PCI_VENDOR_ID_QUATECH 0x135C
#define PCI_DEVICE_ID_QUATECH_QSC100 0x0010
@@ -2383,6 +2385,9 @@
#define PCI_DEVICE_ID_INTEL_ICH10_4 0x3a30
#define PCI_DEVICE_ID_INTEL_ICH10_5 0x3a60
#define PCI_DEVICE_ID_INTEL_IOAT_SNB 0x402f
+#define PCI_DEVICE_ID_INTEL_5400_ERR 0x4030
+#define PCI_DEVICE_ID_INTEL_5400_FBD0 0x4035
+#define PCI_DEVICE_ID_INTEL_5400_FBD1 0x4036
#define PCI_DEVICE_ID_INTEL_IOAT_SCNB 0x65ff
#define PCI_DEVICE_ID_INTEL_TOLAPAI_0 0x5031
#define PCI_DEVICE_ID_INTEL_TOLAPAI_1 0x5032
diff --git a/include/linux/percpu.h b/include/linux/percpu.h
index d746a2a..4cdd393 100644
--- a/include/linux/percpu.h
+++ b/include/linux/percpu.h
@@ -13,8 +13,14 @@
__attribute__((__section__(".data.percpu"))) \
PER_CPU_ATTRIBUTES __typeof__(type) per_cpu__##name
+#ifdef MODULE
+#define SHARED_ALIGNED_SECTION ".data.percpu"
+#else
+#define SHARED_ALIGNED_SECTION ".data.percpu.shared_aligned"
+#endif
+
#define DEFINE_PER_CPU_SHARED_ALIGNED(type, name) \
- __attribute__((__section__(".data.percpu.shared_aligned"))) \
+ __attribute__((__section__(SHARED_ALIGNED_SECTION))) \
PER_CPU_ATTRIBUTES __typeof__(type) per_cpu__##name \
____cacheline_aligned_in_smp
#else
diff --git a/include/linux/proc_fs.h b/include/linux/proc_fs.h
index 9883bc9..fff1d27 100644
--- a/include/linux/proc_fs.h
+++ b/include/linux/proc_fs.h
@@ -9,6 +9,8 @@
struct net;
struct completion;
+struct mm_struct;
+
/*
* The proc filesystem constants/structures
*/
@@ -101,8 +103,6 @@
extern void proc_root_init(void);
extern void proc_misc_init(void);
-struct mm_struct;
-
void proc_flush_task(struct task_struct *task);
struct dentry *proc_pid_lookup(struct inode *dir, struct dentry * dentry, struct nameidata *);
int proc_pid_readdir(struct file * filp, void * dirent, filldir_t filldir);
diff --git a/include/linux/raid/bitmap.h b/include/linux/raid/bitmap.h
index 47fbcba..78bfdea 100644
--- a/include/linux/raid/bitmap.h
+++ b/include/linux/raid/bitmap.h
@@ -262,7 +262,6 @@
void bitmap_flush(mddev_t *mddev);
void bitmap_destroy(mddev_t *mddev);
-char *file_path(struct file *file, char *buf, int count);
void bitmap_print_sb(struct bitmap *bitmap);
void bitmap_update_sb(struct bitmap *bitmap);
diff --git a/include/linux/raid/md.h b/include/linux/raid/md.h
index 81a1a02..b7386ae 100644
--- a/include/linux/raid/md.h
+++ b/include/linux/raid/md.h
@@ -72,6 +72,8 @@
*/
#define MD_PATCHLEVEL_VERSION 3
+extern int mdp_major;
+
extern int register_md_personality (struct mdk_personality *p);
extern int unregister_md_personality (struct mdk_personality *p);
extern mdk_thread_t * md_register_thread (void (*run) (mddev_t *mddev),
diff --git a/include/linux/raid/md_k.h b/include/linux/raid/md_k.h
index 812ffa5..3dea9f5 100644
--- a/include/linux/raid/md_k.h
+++ b/include/linux/raid/md_k.h
@@ -180,13 +180,15 @@
int sync_speed_min;
int sync_speed_max;
+ /* resync even though the same disks are shared among md-devices */
+ int parallel_resync;
+
int ok_start_degraded;
/* recovery/resync flags
* NEEDED: we might need to start a resync/recover
* RUNNING: a thread is running, or about to be started
* SYNC: actually doing a resync, not a recovery
- * ERR: and IO error was detected - abort the resync/recovery
- * INTR: someone requested a (clean) early abort.
+ * INTR: resync needs to be aborted for some reason
* DONE: thread is done and is waiting to be reaped
* REQUEST: user-space has requested a sync (used with SYNC)
* CHECK: user-space request for for check-only, no repair
@@ -196,7 +198,6 @@
*/
#define MD_RECOVERY_RUNNING 0
#define MD_RECOVERY_SYNC 1
-#define MD_RECOVERY_ERR 2
#define MD_RECOVERY_INTR 3
#define MD_RECOVERY_DONE 4
#define MD_RECOVERY_NEEDED 5
diff --git a/include/linux/rtnetlink.h b/include/linux/rtnetlink.h
index 44c81c7..b358c70 100644
--- a/include/linux/rtnetlink.h
+++ b/include/linux/rtnetlink.h
@@ -246,6 +246,7 @@
{
RT_TABLE_UNSPEC=0,
/* User defined values */
+ RT_TABLE_COMPAT=252,
RT_TABLE_DEFAULT=253,
RT_TABLE_MAIN=254,
RT_TABLE_LOCAL=255,
@@ -267,10 +268,10 @@
RTA_PREFSRC,
RTA_METRICS,
RTA_MULTIPATH,
- RTA_PROTOINFO,
+ RTA_PROTOINFO, /* no longer used */
RTA_FLOW,
RTA_CACHEINFO,
- RTA_SESSION,
+ RTA_SESSION, /* no longer used */
RTA_MP_ALGO, /* no longer used */
RTA_TABLE,
__RTA_MAX
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 4ab9f32..c5d3f84 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -766,7 +766,6 @@
struct sched_domain *child; /* bottom domain must be null terminated */
struct sched_group *groups; /* the balancing groups of the domain */
cpumask_t span; /* span of all CPUs in this domain */
- int first_cpu; /* cache of the first cpu in this domain */
unsigned long min_interval; /* Minimum balance interval ms */
unsigned long max_interval; /* Maximum balance interval ms */
unsigned int busy_factor; /* less balancing by factor if busy */
@@ -1848,7 +1847,9 @@
extern void exit_files(struct task_struct *);
extern void __cleanup_signal(struct signal_struct *);
extern void __cleanup_sighand(struct sighand_struct *);
+
extern void exit_itimers(struct signal_struct *);
+extern void flush_itimer_signals(void);
extern NORET_TYPE void do_group_exit(int);
@@ -2025,9 +2026,22 @@
return signal_pending(p) && __fatal_signal_pending(p);
}
+static inline int signal_pending_state(long state, struct task_struct *p)
+{
+ if (!(state & (TASK_INTERRUPTIBLE | TASK_WAKEKILL)))
+ return 0;
+ if (!signal_pending(p))
+ return 0;
+
+ if (state & (__TASK_STOPPED | __TASK_TRACED))
+ return 0;
+
+ return (state & TASK_INTERRUPTIBLE) || __fatal_signal_pending(p);
+}
+
static inline int need_resched(void)
{
- return unlikely(test_tsk_need_resched(current));
+ return unlikely(test_thread_flag(TIF_NEED_RESCHED));
}
/*
@@ -2038,7 +2052,7 @@
* cond_resched_softirq() will enable bhs before scheduling.
*/
extern int _cond_resched(void);
-#ifdef CONFIG_PREEMPT
+#ifdef CONFIG_PREEMPT_BKL
static inline int cond_resched(void)
{
return 0;
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h
index d32123a..d8f31de 100644
--- a/include/linux/serial_core.h
+++ b/include/linux/serial_core.h
@@ -192,6 +192,7 @@
void (*shutdown)(struct uart_port *);
void (*set_termios)(struct uart_port *, struct ktermios *new,
struct ktermios *old);
+ void (*set_ldisc)(struct uart_port *);
void (*pm)(struct uart_port *, unsigned int state,
unsigned int oldstate);
int (*set_wake)(struct uart_port *, unsigned int state);
diff --git a/include/linux/slab.h b/include/linux/slab.h
index 805ed4b..c2ad350 100644
--- a/include/linux/slab.h
+++ b/include/linux/slab.h
@@ -276,6 +276,17 @@
return kmalloc(size, flags | __GFP_ZERO);
}
+/**
+ * kzalloc_node - allocate zeroed memory from a particular memory node.
+ * @size: how many bytes of memory are required.
+ * @flags: the type of memory to allocate (see kmalloc).
+ * @node: memory node from which to allocate
+ */
+static inline void *kzalloc_node(size_t size, gfp_t flags, int node)
+{
+ return kmalloc_node(size, flags | __GFP_ZERO, node);
+}
+
#ifdef CONFIG_SLABINFO
extern const struct seq_operations slabinfo_op;
ssize_t slabinfo_write(struct file *, const char __user *, size_t, loff_t *);
diff --git a/include/linux/sm501.h b/include/linux/sm501.h
index bca1345..95c1c39 100644
--- a/include/linux/sm501.h
+++ b/include/linux/sm501.h
@@ -71,8 +71,8 @@
#define SM501FB_FLAG_DISABLE_AT_EXIT (1<<1)
#define SM501FB_FLAG_USE_HWCURSOR (1<<2)
#define SM501FB_FLAG_USE_HWACCEL (1<<3)
-#define SM501FB_FLAG_PANEL_USE_FPEN (1<<4)
-#define SM501FB_FLAG_PANEL_USE_VBIASEN (1<<5)
+#define SM501FB_FLAG_PANEL_NO_FPEN (1<<4)
+#define SM501FB_FLAG_PANEL_NO_VBIASEN (1<<5)
struct sm501_platdata_fbsub {
struct fb_videomode *def_mode;
diff --git a/include/linux/spi/mmc_spi.h b/include/linux/spi/mmc_spi.h
index e9bbe3e..d5ca78b 100644
--- a/include/linux/spi/mmc_spi.h
+++ b/include/linux/spi/mmc_spi.h
@@ -1,6 +1,8 @@
#ifndef __LINUX_SPI_MMC_SPI_H
#define __LINUX_SPI_MMC_SPI_H
+#include <linux/interrupt.h>
+
struct device;
struct mmc_host;
diff --git a/include/linux/ssb/ssb_driver_gige.h b/include/linux/ssb/ssb_driver_gige.h
index 01fbdf5f..942e387 100644
--- a/include/linux/ssb/ssb_driver_gige.h
+++ b/include/linux/ssb/ssb_driver_gige.h
@@ -100,7 +100,7 @@
/* Get the device MAC address */
static inline void ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
{
-#ifdef CONFIG_BCM947XX
+#ifdef CONFIG_BCM47XX
char *res = nvram_get("et0macaddr");
if (res)
memcpy(macaddr, res, 6);
diff --git a/include/linux/sunrpc/svc_rdma.h b/include/linux/sunrpc/svc_rdma.h
index c11bbcc..05eb466 100644
--- a/include/linux/sunrpc/svc_rdma.h
+++ b/include/linux/sunrpc/svc_rdma.h
@@ -71,7 +71,8 @@
* completes.
*/
struct svc_rdma_op_ctxt {
- struct svc_rdma_op_ctxt *next;
+ struct svc_rdma_op_ctxt *read_hdr;
+ struct list_head free_list;
struct xdr_buf arg;
struct list_head dto_q;
enum ib_wr_opcode wr_op;
@@ -85,7 +86,6 @@
struct page *pages[RPCSVC_MAXPAGES];
};
-#define RDMACTXT_F_READ_DONE 1
#define RDMACTXT_F_LAST_CTXT 2
struct svcxprt_rdma {
@@ -104,7 +104,8 @@
struct ib_pd *sc_pd;
- struct svc_rdma_op_ctxt *sc_ctxt_head;
+ atomic_t sc_ctxt_used;
+ struct list_head sc_ctxt_free;
int sc_ctxt_cnt;
int sc_ctxt_bump;
int sc_ctxt_max;
@@ -123,6 +124,7 @@
struct list_head sc_dto_q; /* DTO tasklet I/O pending Q */
struct list_head sc_read_complete_q;
spinlock_t sc_read_complete_lock;
+ struct work_struct sc_work;
};
/* sc_flags */
#define RDMAXPRT_RQ_PENDING 1
@@ -164,8 +166,8 @@
/* svc_rdma_transport.c */
extern int svc_rdma_send(struct svcxprt_rdma *, struct ib_send_wr *);
-extern int svc_rdma_send_error(struct svcxprt_rdma *, struct rpcrdma_msg *,
- enum rpcrdma_errcode);
+extern void svc_rdma_send_error(struct svcxprt_rdma *, struct rpcrdma_msg *,
+ enum rpcrdma_errcode);
struct page *svc_rdma_get_page(void);
extern int svc_rdma_post_recv(struct svcxprt_rdma *);
extern int svc_rdma_create_listen(struct svc_serv *, int, struct sockaddr *);
diff --git a/include/linux/tcp.h b/include/linux/tcp.h
index d96d9b1..b31b6b7 100644
--- a/include/linux/tcp.h
+++ b/include/linux/tcp.h
@@ -239,11 +239,6 @@
return (struct tcp_request_sock *)req;
}
-struct tcp_deferred_accept_info {
- struct sock *listen_sk;
- struct request_sock *request;
-};
-
struct tcp_sock {
/* inet_connection_sock has to be the first member of tcp_sock */
struct inet_connection_sock inet_conn;
@@ -355,7 +350,7 @@
u32 lost_retrans_low; /* Sent seq after any rxmit (lowest) */
u16 advmss; /* Advertised MSS */
- u16 prior_ssthresh; /* ssthresh saved at recovery start */
+ u32 prior_ssthresh; /* ssthresh saved at recovery start */
u32 lost_out; /* Lost packets */
u32 sacked_out; /* SACK'd packets */
u32 fackets_out; /* FACK'd packets */
@@ -379,8 +374,6 @@
unsigned int keepalive_intvl; /* time interval between keep alive probes */
int linger2;
- struct tcp_deferred_accept_info defer_tcp_accept;
-
unsigned long last_synq_overflow;
u32 tso_deferred;
diff --git a/include/linux/time.h b/include/linux/time.h
index d32ef0a..e15206a 100644
--- a/include/linux/time.h
+++ b/include/linux/time.h
@@ -6,6 +6,7 @@
#ifdef __KERNEL__
# include <linux/cache.h>
# include <linux/seqlock.h>
+# include <linux/math64.h>
#endif
#ifndef _STRUCT_TIMESPEC
@@ -169,18 +170,13 @@
* timespec_add_ns - Adds nanoseconds to a timespec
* @a: pointer to timespec to be incremented
* @ns: unsigned nanoseconds value to be added
+ *
+ * This must always be inlined because its used from the x86-64 vdso,
+ * which cannot call other kernel functions.
*/
-static inline void timespec_add_ns(struct timespec *a, u64 ns)
+static __always_inline void timespec_add_ns(struct timespec *a, u64 ns)
{
- ns += a->tv_nsec;
- while(unlikely(ns >= NSEC_PER_SEC)) {
- /* The following asm() prevents the compiler from
- * optimising this loop into a modulo operation. */
- asm("" : "+r"(ns));
-
- ns -= NSEC_PER_SEC;
- a->tv_sec++;
- }
+ a->tv_sec += __iter_div_u64_rem(a->tv_nsec + ns, NSEC_PER_SEC, &ns);
a->tv_nsec = ns;
}
#endif /* __KERNEL__ */
diff --git a/include/linux/topology.h b/include/linux/topology.h
index 4bb7074..24f3d22 100644
--- a/include/linux/topology.h
+++ b/include/linux/topology.h
@@ -166,7 +166,9 @@
.busy_idx = 3, \
.idle_idx = 3, \
.flags = SD_LOAD_BALANCE \
- | SD_SERIALIZE, \
+ | SD_BALANCE_NEWIDLE \
+ | SD_WAKE_AFFINE \
+ | SD_SERIALIZE, \
.last_balance = jiffies, \
.balance_interval = 64, \
}
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 7f7121f..324a3b2 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -36,7 +36,7 @@
#define N_6PACK 7
#define N_MASC 8 /* Reserved for Mobitex module <kaz@cafe.net> */
#define N_R3964 9 /* Reserved for Simatic R3964 module */
-#define N_PROFIBUS_FDL 10 /* Reserved for Profibus <Dave@mvhi.com> */
+#define N_PROFIBUS_FDL 10 /* Reserved for Profibus */
#define N_IRDA 11 /* Linux IrDa - http://irda.sourceforge.net/ */
#define N_SMSBLOCK 12 /* SMS block mode - for talking to GSM data */
/* cards about SMS messages */
diff --git a/include/linux/types.h b/include/linux/types.h
index 9dc2346..d4a9ce6 100644
--- a/include/linux/types.h
+++ b/include/linux/types.h
@@ -197,8 +197,6 @@
typedef u32 resource_size_t;
#endif
-#endif /* __KERNEL__ */
-
struct ustat {
__kernel_daddr_t f_tfree;
__kernel_ino_t f_tinode;
@@ -206,4 +204,6 @@
char f_fpack[6];
};
+#endif /* __KERNEL__ */
+
#endif /* _LINUX_TYPES_H */
diff --git a/include/linux/usb/association.h b/include/linux/usb/association.h
new file mode 100644
index 0000000..07c5e3c
--- /dev/null
+++ b/include/linux/usb/association.h
@@ -0,0 +1,150 @@
+/*
+ * Wireless USB - Cable Based Association
+ *
+ * Copyright (C) 2006 Intel Corporation
+ * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ */
+#ifndef __LINUX_USB_ASSOCIATION_H
+#define __LINUX_USB_ASSOCIATION_H
+
+
+/*
+ * Association attributes
+ *
+ * Association Models Supplement to WUSB 1.0 T[3-1]
+ *
+ * Each field in the structures has it's ID, it's length and then the
+ * value. This is the actual definition of the field's ID and its
+ * length.
+ */
+struct wusb_am_attr {
+ __u8 id;
+ __u8 len;
+};
+
+/* Different fields defined by the spec */
+#define WUSB_AR_AssociationTypeId { .id = 0x0000, .len = 2 }
+#define WUSB_AR_AssociationSubTypeId { .id = 0x0001, .len = 2 }
+#define WUSB_AR_Length { .id = 0x0002, .len = 4 }
+#define WUSB_AR_AssociationStatus { .id = 0x0004, .len = 4 }
+#define WUSB_AR_LangID { .id = 0x0008, .len = 2 }
+#define WUSB_AR_DeviceFriendlyName { .id = 0x000b, .len = 64 } /* max */
+#define WUSB_AR_HostFriendlyName { .id = 0x000c, .len = 64 } /* max */
+#define WUSB_AR_CHID { .id = 0x1000, .len = 16 }
+#define WUSB_AR_CDID { .id = 0x1001, .len = 16 }
+#define WUSB_AR_ConnectionContext { .id = 0x1002, .len = 48 }
+#define WUSB_AR_BandGroups { .id = 0x1004, .len = 2 }
+
+/* CBAF Control Requests (AMS1.0[T4-1] */
+enum {
+ CBAF_REQ_GET_ASSOCIATION_INFORMATION = 0x01,
+ CBAF_REQ_GET_ASSOCIATION_REQUEST,
+ CBAF_REQ_SET_ASSOCIATION_RESPONSE
+};
+
+/*
+ * CBAF USB-interface defitions
+ *
+ * No altsettings, one optional interrupt endpoint.
+ */
+enum {
+ CBAF_IFACECLASS = 0xef,
+ CBAF_IFACESUBCLASS = 0x03,
+ CBAF_IFACEPROTOCOL = 0x01,
+};
+
+/* Association Information (AMS1.0[T4-3]) */
+struct wusb_cbaf_assoc_info {
+ __le16 Length;
+ __u8 NumAssociationRequests;
+ __le16 Flags;
+ __u8 AssociationRequestsArray[];
+} __attribute__((packed));
+
+/* Association Request (AMS1.0[T4-4]) */
+struct wusb_cbaf_assoc_request {
+ __u8 AssociationDataIndex;
+ __u8 Reserved;
+ __le16 AssociationTypeId;
+ __le16 AssociationSubTypeId;
+ __le32 AssociationTypeInfoSize;
+} __attribute__((packed));
+
+enum {
+ AR_TYPE_WUSB = 0x0001,
+ AR_TYPE_WUSB_RETRIEVE_HOST_INFO = 0x0000,
+ AR_TYPE_WUSB_ASSOCIATE = 0x0001,
+};
+
+/* Association Attribute header (AMS1.0[3.8]) */
+struct wusb_cbaf_attr_hdr {
+ __le16 id;
+ __le16 len;
+} __attribute__((packed));
+
+/* Host Info (AMS1.0[T4-7]) (yeah, more headers and fields...) */
+struct wusb_cbaf_host_info {
+ struct wusb_cbaf_attr_hdr AssociationTypeId_hdr;
+ __le16 AssociationTypeId;
+ struct wusb_cbaf_attr_hdr AssociationSubTypeId_hdr;
+ __le16 AssociationSubTypeId;
+ struct wusb_cbaf_attr_hdr CHID_hdr;
+ struct wusb_ckhdid CHID;
+ struct wusb_cbaf_attr_hdr LangID_hdr;
+ __le16 LangID;
+ struct wusb_cbaf_attr_hdr HostFriendlyName_hdr;
+ __u8 HostFriendlyName[];
+} __attribute__((packed));
+
+/* Device Info (AMS1.0[T4-8])
+ *
+ * I still don't get this tag'n'header stuff for each goddamn
+ * field...
+ */
+struct wusb_cbaf_device_info {
+ struct wusb_cbaf_attr_hdr Length_hdr;
+ __le32 Length;
+ struct wusb_cbaf_attr_hdr CDID_hdr;
+ struct wusb_ckhdid CDID;
+ struct wusb_cbaf_attr_hdr BandGroups_hdr;
+ __le16 BandGroups;
+ struct wusb_cbaf_attr_hdr LangID_hdr;
+ __le16 LangID;
+ struct wusb_cbaf_attr_hdr DeviceFriendlyName_hdr;
+ __u8 DeviceFriendlyName[];
+} __attribute__((packed));
+
+/* Connection Context; CC_DATA - Success case (AMS1.0[T4-9]) */
+struct wusb_cbaf_cc_data {
+ struct wusb_cbaf_attr_hdr AssociationTypeId_hdr;
+ __le16 AssociationTypeId;
+ struct wusb_cbaf_attr_hdr AssociationSubTypeId_hdr;
+ __le16 AssociationSubTypeId;
+ struct wusb_cbaf_attr_hdr Length_hdr;
+ __le32 Length;
+ struct wusb_cbaf_attr_hdr ConnectionContext_hdr;
+ struct wusb_ckhdid CHID;
+ struct wusb_ckhdid CDID;
+ struct wusb_ckhdid CK;
+ struct wusb_cbaf_attr_hdr BandGroups_hdr;
+ __le16 BandGroups;
+} __attribute__((packed));
+
+/* CC_DATA - Failure case (AMS1.0[T4-10]) */
+struct wusb_cbaf_cc_data_fail {
+ struct wusb_cbaf_attr_hdr AssociationTypeId_hdr;
+ __le16 AssociationTypeId;
+ struct wusb_cbaf_attr_hdr AssociationSubTypeId_hdr;
+ __le16 AssociationSubTypeId;
+ struct wusb_cbaf_attr_hdr Length_hdr;
+ __le16 Length;
+ struct wusb_cbaf_attr_hdr AssociationStatus_hdr;
+ __u32 AssociationStatus;
+} __attribute__((packed));
+
+#endif /* __LINUX_USB_ASSOCIATION_H */
diff --git a/include/linux/usb/cdc.h b/include/linux/usb/cdc.h
index 71e52f2..ca228bb 100644
--- a/include/linux/usb/cdc.h
+++ b/include/linux/usb/cdc.h
@@ -130,6 +130,15 @@
__u8 bNumberPowerFilters;
} __attribute__ ((packed));
+/* "Telephone Control Model Functional Descriptor" from CDC WMC spec 6.3..3 */
+struct usb_cdc_dmm_desc {
+ __u8 bFunctionLength;
+ __u8 bDescriptorType;
+ __u8 bDescriptorSubtype;
+ __u16 bcdVersion;
+ __le16 wMaxCommand;
+} __attribute__ ((packed));
+
/* "MDLM Functional Descriptor" from CDC WMC spec 6.7.2.3 */
struct usb_cdc_mdlm_desc {
__u8 bLength;
diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h
index c141118..4a535ea 100644
--- a/include/linux/videodev2.h
+++ b/include/linux/videodev2.h
@@ -865,9 +865,9 @@
#define V4L2_CID_HFLIP (V4L2_CID_BASE+20)
#define V4L2_CID_VFLIP (V4L2_CID_BASE+21)
-/* Deprecated, use V4L2_CID_PAN_RESET and V4L2_CID_TILT_RESET */
-#define V4L2_CID_HCENTER_DEPRECATED (V4L2_CID_BASE+22)
-#define V4L2_CID_VCENTER_DEPRECATED (V4L2_CID_BASE+23)
+/* Deprecated; use V4L2_CID_PAN_RESET and V4L2_CID_TILT_RESET */
+#define V4L2_CID_HCENTER (V4L2_CID_BASE+22)
+#define V4L2_CID_VCENTER (V4L2_CID_BASE+23)
#define V4L2_CID_POWER_LINE_FREQUENCY (V4L2_CID_BASE+24)
enum v4l2_power_line_frequency {
diff --git a/include/linux/virtio_blk.h b/include/linux/virtio_blk.h
index d4695a3..5f79a5f 100644
--- a/include/linux/virtio_blk.h
+++ b/include/linux/virtio_blk.h
@@ -10,18 +10,19 @@
#define VIRTIO_BLK_F_SIZE_MAX 1 /* Indicates maximum segment size */
#define VIRTIO_BLK_F_SEG_MAX 2 /* Indicates maximum # of segments */
#define VIRTIO_BLK_F_GEOMETRY 4 /* Legacy geometry available */
+#define VIRTIO_BLK_F_RO 5 /* Disk is read-only */
struct virtio_blk_config
{
/* The capacity (in 512-byte sectors). */
- __le64 capacity;
+ __u64 capacity;
/* The maximum segment size (if VIRTIO_BLK_F_SIZE_MAX) */
- __le32 size_max;
+ __u32 size_max;
/* The maximum number of segments (if VIRTIO_BLK_F_SEG_MAX) */
- __le32 seg_max;
+ __u32 seg_max;
/* geometry the device (if VIRTIO_BLK_F_GEOMETRY) */
struct virtio_blk_geometry {
- __le16 cylinders;
+ __u16 cylinders;
__u8 heads;
__u8 sectors;
} geometry;
diff --git a/include/linux/virtio_config.h b/include/linux/virtio_config.h
index 50db245..f364bbf 100644
--- a/include/linux/virtio_config.h
+++ b/include/linux/virtio_config.h
@@ -15,6 +15,10 @@
/* We've given up on this device. */
#define VIRTIO_CONFIG_S_FAILED 0x80
+/* Do we get callbacks when the ring is completely used, even if we've
+ * suppressed them? */
+#define VIRTIO_F_NOTIFY_ON_EMPTY 24
+
#ifdef __KERNEL__
#include <linux/virtio.h>
@@ -99,7 +103,7 @@
* The return value is -ENOENT if the feature doesn't exist. Otherwise
* the config value is copied into whatever is pointed to by v. */
#define virtio_config_val(vdev, fbit, offset, v) \
- virtio_config_buf((vdev), (fbit), (offset), (v), sizeof(v))
+ virtio_config_buf((vdev), (fbit), (offset), (v), sizeof(*v))
static inline int virtio_config_buf(struct virtio_device *vdev,
unsigned int fbit,
diff --git a/include/linux/virtio_net.h b/include/linux/virtio_net.h
index 9405aa6..38c0571 100644
--- a/include/linux/virtio_net.h
+++ b/include/linux/virtio_net.h
@@ -38,7 +38,7 @@
#define VIRTIO_NET_HDR_GSO_ECN 0x80 // TCP has ECN set
__u8 gso_type;
__u16 hdr_len; /* Ethernet + IP + tcp/udp hdrs */
- __u16 gso_size; /* Bytes to append to gso_hdr_len per frame */
+ __u16 gso_size; /* Bytes to append to hdr_len per frame */
__u16 csum_start; /* Position to start checksumming from */
__u16 csum_offset; /* Offset after that to place checksum */
};
diff --git a/include/linux/virtio_rng.h b/include/linux/virtio_rng.h
new file mode 100644
index 0000000..331afb6
--- /dev/null
+++ b/include/linux/virtio_rng.h
@@ -0,0 +1,8 @@
+#ifndef _LINUX_VIRTIO_RNG_H
+#define _LINUX_VIRTIO_RNG_H
+#include <linux/virtio_config.h>
+
+/* The ID for virtio_rng */
+#define VIRTIO_ID_RNG 4
+
+#endif /* _LINUX_VIRTIO_RNG_H */
diff --git a/include/linux/wm97xx.h b/include/linux/wm97xx.h
index 4d13732..6f69968 100644
--- a/include/linux/wm97xx.h
+++ b/include/linux/wm97xx.h
@@ -100,6 +100,7 @@
#define WM9713_ADCSEL_Y 0x0004 /* Y measurement */
#define WM9713_ADCSEL_PRES 0x0008 /* Pressure measurement */
#define WM9713_COO 0x0001 /* enable coordinate mode */
+#define WM9713_45W 0x1000 /* set for 5 wire panel */
#define WM9713_PDEN 0x0800 /* measure only when pen down */
#define WM9713_ADCSEL_MASK 0x00fe /* ADC selection mask */
#define WM9713_WAIT 0x0200 /* coordinate wait */
diff --git a/include/media/v4l2-dev.h b/include/media/v4l2-dev.h
index a807d2f..33f01ae 100644
--- a/include/media/v4l2-dev.h
+++ b/include/media/v4l2-dev.h
@@ -40,7 +40,6 @@
#define VFL_TYPE_VTX 3
/* Video standard functions */
-extern unsigned int v4l2_video_std_fps(struct v4l2_standard *vs);
extern char *v4l2_norm_to_name(v4l2_std_id id);
extern int v4l2_video_std_construct(struct v4l2_standard *vs,
int id, char *name);
diff --git a/include/media/videobuf-core.h b/include/media/videobuf-core.h
index 5b39a22..874f134 100644
--- a/include/media/videobuf-core.h
+++ b/include/media/videobuf-core.h
@@ -237,6 +237,9 @@
int videobuf_mmap_setup(struct videobuf_queue *q,
unsigned int bcount, unsigned int bsize,
enum v4l2_memory memory);
+int __videobuf_mmap_setup(struct videobuf_queue *q,
+ unsigned int bcount, unsigned int bsize,
+ enum v4l2_memory memory);
int videobuf_mmap_free(struct videobuf_queue *q);
int videobuf_mmap_mapper(struct videobuf_queue *q,
struct vm_area_struct *vma);
diff --git a/include/net/9p/9p.h b/include/net/9p/9p.h
index 585eb44..b3d3e27 100644
--- a/include/net/9p/9p.h
+++ b/include/net/9p/9p.h
@@ -29,14 +29,31 @@
#ifdef CONFIG_NET_9P_DEBUG
-#define P9_DEBUG_ERROR (1<<0)
-#define P9_DEBUG_9P (1<<2)
-#define P9_DEBUG_VFS (1<<3)
-#define P9_DEBUG_CONV (1<<4)
-#define P9_DEBUG_MUX (1<<5)
-#define P9_DEBUG_TRANS (1<<6)
-#define P9_DEBUG_SLABS (1<<7)
-#define P9_DEBUG_FCALL (1<<8)
+/**
+ * enum p9_debug_flags - bits for mount time debug parameter
+ * @P9_DEBUG_ERROR: more verbose error messages including original error string
+ * @P9_DEBUG_9P: 9P protocol tracing
+ * @P9_DEBUG_VFS: VFS API tracing
+ * @P9_DEBUG_CONV: protocol conversion tracing
+ * @P9_DEBUG_MUX: trace management of concurrent transactions
+ * @P9_DEBUG_TRANS: transport tracing
+ * @P9_DEBUG_SLABS: memory management tracing
+ * @P9_DEBUG_FCALL: verbose dump of protocol messages
+ *
+ * These flags are passed at mount time to turn on various levels of
+ * verbosity and tracing which will be output to the system logs.
+ */
+
+enum p9_debug_flags {
+ P9_DEBUG_ERROR = (1<<0),
+ P9_DEBUG_9P = (1<<2),
+ P9_DEBUG_VFS = (1<<3),
+ P9_DEBUG_CONV = (1<<4),
+ P9_DEBUG_MUX = (1<<5),
+ P9_DEBUG_TRANS = (1<<6),
+ P9_DEBUG_SLABS = (1<<7),
+ P9_DEBUG_FCALL = (1<<8),
+};
extern unsigned int p9_debug_level;
@@ -62,9 +79,47 @@
format , __FUNCTION__, task_pid_nr(current), ## arg); \
} while (0)
+/**
+ * enum p9_msg_t - 9P message types
+ * @P9_TVERSION: version handshake request
+ * @P9_RVERSION: version handshake response
+ * @P9_TAUTH: request to establish authentication channel
+ * @P9_RAUTH: response with authentication information
+ * @P9_TATTACH: establish user access to file service
+ * @P9_RATTACH: response with top level handle to file hierarchy
+ * @P9_TERROR: not used
+ * @P9_RERROR: response for any failed request
+ * @P9_TFLUSH: request to abort a previous request
+ * @P9_RFLUSH: response when previous request has been cancelled
+ * @P9_TWALK: descend a directory hierarchy
+ * @P9_RWALK: response with new handle for position within hierarchy
+ * @P9_TOPEN: prepare a handle for I/O on an existing file
+ * @P9_ROPEN: response with file access information
+ * @P9_TCREATE: prepare a handle for I/O on a new file
+ * @P9_RCREATE: response with file access information
+ * @P9_TREAD: request to transfer data from a file or directory
+ * @P9_RREAD: response with data requested
+ * @P9_TWRITE: reuqest to transfer data to a file
+ * @P9_RWRITE: response with out much data was transfered to file
+ * @P9_TCLUNK: forget about a handle to an entity within the file system
+ * @P9_RCLUNK: response when server has forgotten about the handle
+ * @P9_TREMOVE: request to remove an entity from the hierarchy
+ * @P9_RREMOVE: response when server has removed the entity
+ * @P9_TSTAT: request file entity attributes
+ * @P9_RSTAT: response with file entity attributes
+ * @P9_TWSTAT: request to update file entity attributes
+ * @P9_RWSTAT: response when file entity attributes are updated
+ *
+ * There are 14 basic operations in 9P2000, paired as
+ * requests and responses. The one special case is ERROR
+ * as there is no @P9_TERROR request for clients to transmit to
+ * the server, but the server may respond to any other request
+ * with an @P9_RERROR.
+ *
+ * See Also: http://plan9.bell-labs.com/sys/man/5/INDEX.html
+ */
-/* Message Types */
-enum {
+enum p9_msg_t {
P9_TVERSION = 100,
P9_RVERSION,
P9_TAUTH = 102,
@@ -95,30 +150,71 @@
P9_RWSTAT,
};
-/* open modes */
-enum {
+/**
+ * enum p9_open_mode_t - 9P open modes
+ * @P9_OREAD: open file for reading only
+ * @P9_OWRITE: open file for writing only
+ * @P9_ORDWR: open file for reading or writing
+ * @P9_OEXEC: open file for execution
+ * @P9_OTRUNC: truncate file to zero-length before opening it
+ * @P9_OREXEC: close the file when an exec(2) system call is made
+ * @P9_ORCLOSE: remove the file when the file is closed
+ * @P9_OAPPEND: open the file and seek to the end
+ * @P9_OEXCL: only create a file, do not open it
+ *
+ * 9P open modes differ slightly from Posix standard modes.
+ * In particular, there are extra modes which specify different
+ * semantic behaviors than may be available on standard Posix
+ * systems. For example, @P9_OREXEC and @P9_ORCLOSE are modes that
+ * most likely will not be issued from the Linux VFS client, but may
+ * be supported by servers.
+ *
+ * See Also: http://plan9.bell-labs.com/magic/man2html/2/open
+ */
+
+enum p9_open_mode_t {
P9_OREAD = 0x00,
P9_OWRITE = 0x01,
P9_ORDWR = 0x02,
P9_OEXEC = 0x03,
- P9_OEXCL = 0x04,
P9_OTRUNC = 0x10,
P9_OREXEC = 0x20,
P9_ORCLOSE = 0x40,
P9_OAPPEND = 0x80,
+ P9_OEXCL = 0x1000,
};
-/* permissions */
-enum {
+/**
+ * enum p9_perm_t - 9P permissions
+ * @P9_DMDIR: mode bite for directories
+ * @P9_DMAPPEND: mode bit for is append-only
+ * @P9_DMEXCL: mode bit for excluse use (only one open handle allowed)
+ * @P9_DMMOUNT: mode bite for mount points
+ * @P9_DMAUTH: mode bit for authentication file
+ * @P9_DMTMP: mode bit for non-backed-up files
+ * @P9_DMSYMLINK: mode bit for symbolic links (9P2000.u)
+ * @P9_DMLINK: mode bit for hard-link (9P2000.u)
+ * @P9_DMDEVICE: mode bit for device files (9P2000.u)
+ * @P9_DMNAMEDPIPE: mode bit for named pipe (9P2000.u)
+ * @P9_DMSOCKET: mode bit for socket (9P2000.u)
+ * @P9_DMSETUID: mode bit for setuid (9P2000.u)
+ * @P9_DMSETGID: mode bit for setgid (9P2000.u)
+ * @P9_DMSETVTX: mode bit for sticky bit (9P2000.u)
+ *
+ * 9P permissions differ slightly from Posix standard modes.
+ *
+ * See Also: http://plan9.bell-labs.com/magic/man2html/2/stat
+ */
+enum p9_perm_t {
P9_DMDIR = 0x80000000,
P9_DMAPPEND = 0x40000000,
P9_DMEXCL = 0x20000000,
P9_DMMOUNT = 0x10000000,
P9_DMAUTH = 0x08000000,
P9_DMTMP = 0x04000000,
+/* 9P2000.u extensions */
P9_DMSYMLINK = 0x02000000,
P9_DMLINK = 0x01000000,
- /* 9P2000.u extensions */
P9_DMDEVICE = 0x00800000,
P9_DMNAMEDPIPE = 0x00200000,
P9_DMSOCKET = 0x00100000,
@@ -127,8 +223,26 @@
P9_DMSETVTX = 0x00010000,
};
-/* qid.types */
-enum {
+/**
+ * enum p9_qid_t - QID types
+ * @P9_QTDIR: directory
+ * @P9_QTAPPEND: append-only
+ * @P9_QTEXCL: excluse use (only one open handle allowed)
+ * @P9_QTMOUNT: mount points
+ * @P9_QTAUTH: authentication file
+ * @P9_QTTMP: non-backed-up files
+ * @P9_QTSYMLINK: symbolic links (9P2000.u)
+ * @P9_QTLINK: hard-link (9P2000.u)
+ * @P9_QTFILE: normal files
+ *
+ * QID types are a subset of permissions - they are primarily
+ * used to differentiate semantics for a file system entity via
+ * a jump-table. Their value is also the most signifigant 16 bits
+ * of the permission_t
+ *
+ * See Also: http://plan9.bell-labs.com/magic/man2html/2/stat
+ */
+enum p9_qid_t {
P9_QTDIR = 0x80,
P9_QTAPPEND = 0x40,
P9_QTEXCL = 0x20,
@@ -140,6 +254,7 @@
P9_QTFILE = 0x00,
};
+/* 9P Magic Numbers */
#define P9_NOTAG (u16)(~0)
#define P9_NOFID (u32)(~0)
#define P9_MAXWELEM 16
@@ -147,19 +262,69 @@
/* ample room for Twrite/Rread header */
#define P9_IOHDRSZ 24
+/**
+ * struct p9_str - length prefixed string type
+ * @len: length of the string
+ * @str: the string
+ *
+ * The protocol uses length prefixed strings for all
+ * string data, so we replicate that for our internal
+ * string members.
+ */
+
struct p9_str {
u16 len;
char *str;
};
-/* qids are the unique ID for a file (like an inode */
+/**
+ * struct p9_qid - file system entity information
+ * @type: 8-bit type &p9_qid_t
+ * @version: 16-bit monotonically incrementing version number
+ * @path: 64-bit per-server-unique ID for a file system element
+ *
+ * qids are identifiers used by 9P servers to track file system
+ * entities. The type is used to differentiate semantics for operations
+ * on the entity (ie. read means something different on a directory than
+ * on a file). The path provides a server unique index for an entity
+ * (roughly analogous to an inode number), while the version is updated
+ * every time a file is modified and can be used to maintain cache
+ * coherency between clients and serves.
+ * Servers will often differentiate purely synthetic entities by setting
+ * their version to 0, signaling that they should never be cached and
+ * should be accessed synchronously.
+ *
+ * See Also://plan9.bell-labs.com/magic/man2html/2/stat
+ */
+
struct p9_qid {
u8 type;
u32 version;
u64 path;
};
-/* Plan 9 file metadata (stat) structure */
+/**
+ * struct p9_stat - file system metadata information
+ * @size: length prefix for this stat structure instance
+ * @type: the type of the server (equivilent to a major number)
+ * @dev: the sub-type of the server (equivilent to a minor number)
+ * @qid: unique id from the server of type &p9_qid
+ * @mode: Plan 9 format permissions of type &p9_perm_t
+ * @atime: Last access/read time
+ * @mtime: Last modify/write time
+ * @length: file length
+ * @name: last element of path (aka filename) in type &p9_str
+ * @uid: owner name in type &p9_str
+ * @gid: group owner in type &p9_str
+ * @muid: last modifier in type &p9_str
+ * @extension: area used to encode extended UNIX support in type &p9_str
+ * @n_uid: numeric user id of owner (part of 9p2000.u extension)
+ * @n_gid: numeric group id (part of 9p2000.u extension)
+ * @n_muid: numeric user id of laster modifier (part of 9p2000.u extension)
+ *
+ * See Also: http://plan9.bell-labs.com/magic/man2html/2/stat
+ */
+
struct p9_stat {
u16 size;
u16 type;
@@ -179,10 +344,14 @@
u32 n_muid; /* 9p2000.u extensions */
};
-/* file metadata (stat) structure used to create Twstat message
- The is similar to p9_stat, but the strings don't point to
- the same memory block and should be freed separately
-*/
+/*
+ * file metadata (stat) structure used to create Twstat message
+ * The is identical to &p9_stat, but the strings don't point to
+ * the same memory block and should be freed separately
+ *
+ * See Also: http://plan9.bell-labs.com/magic/man2html/2/stat
+ */
+
struct p9_wstat {
u16 size;
u16 type;
@@ -335,10 +504,20 @@
struct p9_rwstat {
};
-/*
- * fcall is the primary packet structure
- *
- */
+/**
+ * struct p9_fcall - primary packet structure
+ * @size: prefixed length of the structure
+ * @id: protocol operating identifier of type &p9_msg_t
+ * @tag: transaction id of the request
+ * @sdata: payload
+ * @params: per-operation parameters
+ *
+ * &p9_fcall represents the structure for all 9P RPC
+ * transactions. Requests are packaged into fcalls, and reponses
+ * must be extracted from them.
+ *
+ * See Also: http://plan9.bell-labs.com/magic/man2html/2/fcall
+ */
struct p9_fcall {
u32 size;
@@ -416,4 +595,5 @@
int p9_error_init(void);
int p9_errstr2errno(char *, int);
+int p9_trans_fd_init(void);
#endif /* NET_9P_H */
diff --git a/include/net/9p/client.h b/include/net/9p/client.h
index e52f93d..c936dd1 100644
--- a/include/net/9p/client.h
+++ b/include/net/9p/client.h
@@ -26,6 +26,23 @@
#ifndef NET_9P_CLIENT_H
#define NET_9P_CLIENT_H
+/**
+ * struct p9_client - per client instance state
+ * @lock: protect @fidlist
+ * @msize: maximum data size negotiated by protocol
+ * @dotu: extension flags negotiated by protocol
+ * @trans_mod: module API instantiated with this client
+ * @trans: tranport instance state and API
+ * @conn: connection state information used by trans_fd
+ * @fidpool: fid handle accounting for session
+ * @fidlist: List of active fid handles
+ *
+ * The client structure is used to keep track of various per-client
+ * state that has been instantiated.
+ *
+ * Bugs: duplicated data and potentially unnecessary elements.
+ */
+
struct p9_client {
spinlock_t lock; /* protect client structure */
int msize;
@@ -38,6 +55,24 @@
struct list_head fidlist;
};
+/**
+ * struct p9_fid - file system entity handle
+ * @clnt: back pointer to instantiating &p9_client
+ * @fid: numeric identifier for this handle
+ * @mode: current mode of this fid (enum?)
+ * @qid: the &p9_qid server identifier this handle points to
+ * @iounit: the server reported maximum transaction size for this file
+ * @uid: the numeric uid of the local user who owns this handle
+ * @aux: transport specific information (unused?)
+ * @rdir_fpos: tracks offset of file position when reading directory contents
+ * @rdir_pos: (unused?)
+ * @rdir_fcall: holds response of last directory read request
+ * @flist: per-client-instance fid tracking
+ * @dlist: per-dentry fid tracking
+ *
+ * TODO: This needs lots of explanation.
+ */
+
struct p9_fid {
struct p9_client *clnt;
u32 fid;
diff --git a/include/net/9p/transport.h b/include/net/9p/transport.h
index d2209ae..0db3a40 100644
--- a/include/net/9p/transport.h
+++ b/include/net/9p/transport.h
@@ -26,12 +26,40 @@
#ifndef NET_9P_TRANSPORT_H
#define NET_9P_TRANSPORT_H
+/**
+ * enum p9_trans_status - different states of underlying transports
+ * @Connected: transport is connected and healthy
+ * @Disconnected: transport has been disconnected
+ * @Hung: transport is connected by wedged
+ *
+ * This enumeration details the various states a transport
+ * instatiation can be in.
+ */
+
enum p9_trans_status {
Connected,
Disconnected,
Hung,
};
+/**
+ * struct p9_trans - per-transport state and API
+ * @status: transport &p9_trans_status
+ * @msize: negotiated maximum packet size (duplicate from client)
+ * @extended: negotiated protocol extensions (duplicate from client)
+ * @priv: transport private data
+ * @close: member function to disconnect and close the transport
+ * @rpc: member function to issue a request to the transport
+ *
+ * This is the basic API for a transport instance. It is used as
+ * a handle by the client to issue requests. This interface is currently
+ * in flux during reorganization.
+ *
+ * Bugs: there is lots of duplicated data here and its not clear that
+ * the member functions need to be per-instance versus per transport
+ * module.
+ */
+
struct p9_trans {
enum p9_trans_status status;
int msize;
@@ -42,6 +70,21 @@
struct p9_fcall **rc);
};
+/**
+ * struct p9_trans_module - transport module interface
+ * @list: used to maintain a list of currently available transports
+ * @name: the human-readable name of the transport
+ * @maxsize: transport provided maximum packet size
+ * @def: set if this transport should be considered the default
+ * @create: member function to create a new connection on this transport
+ *
+ * This is the basic API for a transport module which is registered by the
+ * transport module with the 9P core network module and used by the client
+ * to instantiate a new connection on a transport.
+ *
+ * Bugs: the transport module list isn't protected.
+ */
+
struct p9_trans_module {
struct list_head list;
char *name; /* name of transport */
@@ -53,5 +96,4 @@
void v9fs_register_trans(struct p9_trans_module *m);
struct p9_trans_module *v9fs_match_trans(const substring_t *name);
struct p9_trans_module *v9fs_default_trans(void);
-
#endif /* NET_9P_TRANSPORT_H */
diff --git a/include/net/addrconf.h b/include/net/addrconf.h
index 0a2f037..bbd3d58 100644
--- a/include/net/addrconf.h
+++ b/include/net/addrconf.h
@@ -94,6 +94,28 @@
extern void addrconf_leave_solict(struct inet6_dev *idev,
struct in6_addr *addr);
+static inline unsigned long addrconf_timeout_fixup(u32 timeout,
+ unsigned unit)
+{
+ if (timeout == 0xffffffff)
+ return ~0UL;
+
+ /*
+ * Avoid arithmetic overflow.
+ * Assuming unit is constant and non-zero, this "if" statement
+ * will go away on 64bit archs.
+ */
+ if (0xfffffffe > LONG_MAX / unit && timeout > LONG_MAX / unit)
+ return LONG_MAX / unit;
+
+ return timeout;
+}
+
+static inline int addrconf_finite_timeout(unsigned long timeout)
+{
+ return ~timeout;
+}
+
/*
* IPv6 Address Label subsystem (addrlabel.c)
*/
diff --git a/include/net/genetlink.h b/include/net/genetlink.h
index decdda5..747c255 100644
--- a/include/net/genetlink.h
+++ b/include/net/genetlink.h
@@ -162,9 +162,9 @@
* @skb: socket buffer the message is stored in
* @hdr: generic netlink message header
*/
-static inline int genlmsg_cancel(struct sk_buff *skb, void *hdr)
+static inline void genlmsg_cancel(struct sk_buff *skb, void *hdr)
{
- return nlmsg_cancel(skb, hdr - GENL_HDRLEN - NLMSG_HDRLEN);
+ nlmsg_cancel(skb, hdr - GENL_HDRLEN - NLMSG_HDRLEN);
}
/**
diff --git a/include/net/inet_sock.h b/include/net/inet_sock.h
index a42cd63..9fabe5b 100644
--- a/include/net/inet_sock.h
+++ b/include/net/inet_sock.h
@@ -197,4 +197,14 @@
return skb->rtable->rt_iif;
}
+static inline struct request_sock *inet_reqsk_alloc(struct request_sock_ops *ops)
+{
+ struct request_sock *req = reqsk_alloc(ops);
+
+ if (req != NULL)
+ inet_rsk(req)->opt = NULL;
+
+ return req;
+}
+
#endif /* _INET_SOCK_H */
diff --git a/include/net/irda/discovery.h b/include/net/irda/discovery.h
index e4efad1..0ce9339 100644
--- a/include/net/irda/discovery.h
+++ b/include/net/irda/discovery.h
@@ -57,9 +57,6 @@
__u8 byte[2];
} __u16_host_order;
-/* Same purpose, different application */
-#define u16ho(array) (* ((__u16 *) array))
-
/* Types of discovery */
typedef enum {
DISCOVERY_LOG, /* What's in our discovery log */
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 4a80d74..dae3f9e 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -1594,13 +1594,16 @@
void ieee80211_scan_completed(struct ieee80211_hw *hw);
/**
- * ieee80211_iterate_active_interfaces - iterate active interfaces
+ * ieee80211_iterate_active_interfaces- iterate active interfaces
*
* This function iterates over the interfaces associated with a given
* hardware that are currently active and calls the callback for them.
+ * This function allows the iterator function to sleep, when the iterator
+ * function is atomic @ieee80211_iterate_active_interfaces_atomic can
+ * be used.
*
* @hw: the hardware struct of which the interfaces should be iterated over
- * @iterator: the iterator function to call, cannot sleep
+ * @iterator: the iterator function to call
* @data: first argument of the iterator function
*/
void ieee80211_iterate_active_interfaces(struct ieee80211_hw *hw,
@@ -1609,6 +1612,24 @@
void *data);
/**
+ * ieee80211_iterate_active_interfaces_atomic - iterate active interfaces
+ *
+ * This function iterates over the interfaces associated with a given
+ * hardware that are currently active and calls the callback for them.
+ * This function requires the iterator callback function to be atomic,
+ * if that is not desired, use @ieee80211_iterate_active_interfaces instead.
+ *
+ * @hw: the hardware struct of which the interfaces should be iterated over
+ * @iterator: the iterator function to call, cannot sleep
+ * @data: first argument of the iterator function
+ */
+void ieee80211_iterate_active_interfaces_atomic(struct ieee80211_hw *hw,
+ void (*iterator)(void *data,
+ u8 *mac,
+ struct ieee80211_vif *vif),
+ void *data);
+
+/**
* ieee80211_start_tx_ba_session - Start a tx Block Ack session.
* @hw: pointer as obtained from ieee80211_alloc_hw().
* @ra: receiver address of the BA session recipient
diff --git a/include/net/ndisc.h b/include/net/ndisc.h
index 9c451ff..a01b7c4 100644
--- a/include/net/ndisc.h
+++ b/include/net/ndisc.h
@@ -129,6 +129,10 @@
void __user *buffer,
size_t *lenp,
loff_t *ppos);
+int ndisc_ifinfo_sysctl_strategy(ctl_table *ctl, int __user *name,
+ int nlen, void __user *oldval,
+ size_t __user *oldlenp,
+ void __user *newval, size_t newlen);
#endif
extern void inet6_ifinfo_notify(int event,
diff --git a/include/net/netlink.h b/include/net/netlink.h
index a5506c42..dfc3701 100644
--- a/include/net/netlink.h
+++ b/include/net/netlink.h
@@ -556,14 +556,12 @@
* @skb: socket buffer the message is stored in
* @mark: mark to trim to
*
- * Trims the message to the provided mark. Returns -1.
+ * Trims the message to the provided mark.
*/
-static inline int nlmsg_trim(struct sk_buff *skb, const void *mark)
+static inline void nlmsg_trim(struct sk_buff *skb, const void *mark)
{
if (mark)
skb_trim(skb, (unsigned char *) mark - skb->data);
-
- return -1;
}
/**
@@ -572,11 +570,11 @@
* @nlh: netlink message header
*
* Removes the complete netlink message including all
- * attributes from the socket buffer again. Returns -1.
+ * attributes from the socket buffer again.
*/
-static inline int nlmsg_cancel(struct sk_buff *skb, struct nlmsghdr *nlh)
+static inline void nlmsg_cancel(struct sk_buff *skb, struct nlmsghdr *nlh)
{
- return nlmsg_trim(skb, nlh);
+ nlmsg_trim(skb, nlh);
}
/**
@@ -772,12 +770,13 @@
const struct nla_policy *policy,
int len)
{
- if (nla_len(nla) < len)
- return -1;
- if (nla_len(nla) >= NLA_ALIGN(len) + sizeof(struct nlattr))
- return nla_parse_nested(tb, maxtype,
- nla_data(nla) + NLA_ALIGN(len),
- policy);
+ int nested_len = nla_len(nla) - NLA_ALIGN(len);
+
+ if (nested_len < 0)
+ return -EINVAL;
+ if (nested_len >= nla_attr_size(0))
+ return nla_parse(tb, maxtype, nla_data(nla) + NLA_ALIGN(len),
+ nested_len, policy);
memset(tb, 0, sizeof(struct nlattr *) * (maxtype + 1));
return 0;
}
@@ -1079,11 +1078,11 @@
* @start: container attribute
*
* Removes the container attribute and including all nested
- * attributes. Returns -1.
+ * attributes. Returns -EMSGSIZE
*/
-static inline int nla_nest_cancel(struct sk_buff *skb, struct nlattr *start)
+static inline void nla_nest_cancel(struct sk_buff *skb, struct nlattr *start)
{
- return nlmsg_trim(skb, start);
+ nlmsg_trim(skb, start);
}
/**
diff --git a/include/net/request_sock.h b/include/net/request_sock.h
index b220b5f..0c96e7b 100644
--- a/include/net/request_sock.h
+++ b/include/net/request_sock.h
@@ -115,8 +115,8 @@
struct request_sock *rskq_accept_head;
struct request_sock *rskq_accept_tail;
rwlock_t syn_wait_lock;
- u16 rskq_defer_accept;
- /* 2 bytes hole, try to pack */
+ u8 rskq_defer_accept;
+ /* 3 bytes hole, try to pack */
struct listen_sock *listen_opt;
};
diff --git a/include/net/sctp/structs.h b/include/net/sctp/structs.h
index 0ce0443..7f25195 100644
--- a/include/net/sctp/structs.h
+++ b/include/net/sctp/structs.h
@@ -548,7 +548,8 @@
struct dst_entry *(*get_dst) (struct sctp_association *asoc,
union sctp_addr *daddr,
union sctp_addr *saddr);
- void (*get_saddr) (struct sctp_association *asoc,
+ void (*get_saddr) (struct sctp_sock *sk,
+ struct sctp_association *asoc,
struct dst_entry *dst,
union sctp_addr *daddr,
union sctp_addr *saddr);
@@ -587,6 +588,7 @@
int (*is_ce) (const struct sk_buff *sk);
void (*seq_dump_addr)(struct seq_file *seq,
union sctp_addr *addr);
+ void (*ecn_capable)(struct sock *sk);
__u16 net_header_len;
int sockaddr_len;
sa_family_t sa_family;
@@ -901,7 +903,10 @@
* calculation completes (i.e. the DATA chunk
* is SACK'd) clear this flag.
*/
- int rto_pending;
+ __u8 rto_pending;
+
+ /* Flag to track the current fast recovery state */
+ __u8 fast_recovery;
/*
* These are the congestion stats.
@@ -920,6 +925,9 @@
/* Data that has been sent, but not acknowledged. */
__u32 flight_size;
+ /* TSN marking the fast recovery exit point */
+ __u32 fast_recovery_exit;
+
/* Destination */
struct dst_entry *dst;
/* Source address. */
@@ -1044,7 +1052,7 @@
struct sctp_sock *);
void sctp_transport_pmtu(struct sctp_transport *);
void sctp_transport_free(struct sctp_transport *);
-void sctp_transport_reset_timers(struct sctp_transport *);
+void sctp_transport_reset_timers(struct sctp_transport *, int);
void sctp_transport_hold(struct sctp_transport *);
void sctp_transport_put(struct sctp_transport *);
void sctp_transport_update_rto(struct sctp_transport *, __u32);
@@ -1134,6 +1142,9 @@
/* How many unackd bytes do we have in-flight? */
__u32 outstanding_bytes;
+ /* Are we doing fast-rtx on this queue */
+ char fast_rtx;
+
/* Corked? */
char cork;
diff --git a/include/net/syncppp.h b/include/net/syncppp.h
index 877efa4..e43f407 100644
--- a/include/net/syncppp.h
+++ b/include/net/syncppp.h
@@ -59,7 +59,7 @@
static inline struct sppp *sppp_of(struct net_device *dev)
{
- struct ppp_device **ppp = dev->priv;
+ struct ppp_device **ppp = dev->ml_priv;
BUG_ON((*ppp)->dev != dev);
return &(*ppp)->sppp;
}
diff --git a/include/net/tcp.h b/include/net/tcp.h
index 633147c..cf54034 100644
--- a/include/net/tcp.h
+++ b/include/net/tcp.h
@@ -139,7 +139,6 @@
#define MAX_TCP_KEEPINTVL 32767
#define MAX_TCP_KEEPCNT 127
#define MAX_TCP_SYNCNT 127
-#define MAX_TCP_ACCEPT_DEFERRED 65535
#define TCP_SYNQ_INTERVAL (HZ/5) /* Period of SYNACK timer */
@@ -433,7 +432,6 @@
extern int tcp_disconnect(struct sock *sk, int flags);
-extern void tcp_unhash(struct sock *sk);
/* From syncookies.c */
extern __u32 syncookie_secret[2][16-4+SHA_DIGEST_WORDS];
diff --git a/include/net/transp_v6.h b/include/net/transp_v6.h
index 27394e0..112934a 100644
--- a/include/net/transp_v6.h
+++ b/include/net/transp_v6.h
@@ -40,7 +40,8 @@
struct msghdr *msg,
struct sk_buff *skb);
-extern int datagram_send_ctl(struct msghdr *msg,
+extern int datagram_send_ctl(struct net *net,
+ struct msghdr *msg,
struct flowi *fl,
struct ipv6_txoptions *opt,
int *hlimit, int *tclass);
diff --git a/include/net/udp.h b/include/net/udp.h
index 3e55a99..ccce837 100644
--- a/include/net/udp.h
+++ b/include/net/udp.h
@@ -135,6 +135,7 @@
extern int udp_sendmsg(struct kiocb *iocb, struct sock *sk,
struct msghdr *msg, size_t len);
+extern void udp_flush_pending_frames(struct sock *sk);
extern int udp_rcv(struct sk_buff *skb);
extern int udp_ioctl(struct sock *sk, int cmd, unsigned long arg);
diff --git a/include/rdma/ib_verbs.h b/include/rdma/ib_verbs.h
index 911a661..31d30b1 100644
--- a/include/rdma/ib_verbs.h
+++ b/include/rdma/ib_verbs.h
@@ -105,7 +105,6 @@
*/
IB_DEVICE_UD_IP_CSUM = (1<<18),
IB_DEVICE_UD_TSO = (1<<19),
- IB_DEVICE_SEND_W_INV = (1<<21),
};
enum ib_atomic_cap {
diff --git a/include/sound/ac97_codec.h b/include/sound/ac97_codec.h
index 049edc5..9c309da 100644
--- a/include/sound/ac97_codec.h
+++ b/include/sound/ac97_codec.h
@@ -505,6 +505,7 @@
unsigned short pcmreg[3]; // PCM registers
unsigned short codec_cfg[3]; // CODEC_CFG bits
unsigned char swap_mic_linein; // AD1986/AD1986A only
+ unsigned char lo_as_master; /* LO as master */
} ad18xx;
unsigned int dev_flags; /* device specific */
} spec;
diff --git a/include/sound/soc.h b/include/sound/soc.h
index e6ea6f7..d3c8c03 100644
--- a/include/sound/soc.h
+++ b/include/sound/soc.h
@@ -238,7 +238,7 @@
struct snd_ctl_elem_info *uinfo);
int snd_soc_info_volsw_ext(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_info *uinfo);
-#define snd_soc_info_bool_ext snd_ctl_boolean_mono
+#define snd_soc_info_bool_ext snd_ctl_boolean_mono_info
int snd_soc_get_volsw(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol);
int snd_soc_put_volsw(struct snd_kcontrol *kcontrol,
diff --git a/init/Kconfig b/init/Kconfig
index 6135d07..6199d11 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -13,6 +13,7 @@
default "/lib/modules/$UNAME_RELEASE/.config"
default "/etc/kernel-config"
default "/boot/config-$UNAME_RELEASE"
+ default "$ARCH_DEFCONFIG"
default "arch/$ARCH/defconfig"
menu "General setup"
diff --git a/init/do_mounts.c b/init/do_mounts.c
index 3885e70..660c1e5 100644
--- a/init/do_mounts.c
+++ b/init/do_mounts.c
@@ -76,6 +76,7 @@
char s[32];
char *p;
dev_t res = 0;
+ int part;
if (strncmp(name, "/dev/", 5) != 0) {
unsigned maj, min;
@@ -106,7 +107,31 @@
for (p = s; *p; p++)
if (*p == '/')
*p = '!';
- res = blk_lookup_devt(s);
+ res = blk_lookup_devt(s, 0);
+ if (res)
+ goto done;
+
+ /*
+ * try non-existant, but valid partition, which may only exist
+ * after revalidating the disk, like partitioned md devices
+ */
+ while (p > s && isdigit(p[-1]))
+ p--;
+ if (p == s || !*p || *p == '0')
+ goto fail;
+
+ /* try disk name without <part number> */
+ part = simple_strtoul(p, NULL, 10);
+ *p = '\0';
+ res = blk_lookup_devt(s, part);
+ if (res)
+ goto done;
+
+ /* try disk name without p<part number> */
+ if (p < s + 2 || !isdigit(p[-2]) || p[-1] != 'p')
+ goto fail;
+ p[-1] = '\0';
+ res = blk_lookup_devt(s, part);
if (res)
goto done;
diff --git a/init/do_mounts_md.c b/init/do_mounts_md.c
index 7473b0c..693d246 100644
--- a/init/do_mounts_md.c
+++ b/init/do_mounts_md.c
@@ -24,7 +24,6 @@
static int md_setup_ents __initdata;
-extern int mdp_major;
/*
* Parse the command-line parameters given our kernel, but do not
* actually try to invoke the MD device now; that is handled by
diff --git a/init/main.c b/init/main.c
index ddada7a..f7fb200 100644
--- a/init/main.c
+++ b/init/main.c
@@ -693,55 +693,57 @@
}
__setup("initcall_debug", initcall_debug_setup);
+static void __init do_one_initcall(initcall_t fn)
+{
+ int count = preempt_count();
+ ktime_t t0, t1, delta;
+ char msgbuf[64];
+ int result;
+
+ if (initcall_debug) {
+ print_fn_descriptor_symbol("calling %s\n", fn);
+ t0 = ktime_get();
+ }
+
+ result = fn();
+
+ if (initcall_debug) {
+ t1 = ktime_get();
+ delta = ktime_sub(t1, t0);
+
+ print_fn_descriptor_symbol("initcall %s", fn);
+ printk(" returned %d after %Ld msecs\n", result,
+ (unsigned long long) delta.tv64 >> 20);
+ }
+
+ msgbuf[0] = 0;
+
+ if (result && result != -ENODEV && initcall_debug)
+ sprintf(msgbuf, "error code %d ", result);
+
+ if (preempt_count() != count) {
+ strlcat(msgbuf, "preemption imbalance ", sizeof(msgbuf));
+ preempt_count() = count;
+ }
+ if (irqs_disabled()) {
+ strlcat(msgbuf, "disabled interrupts ", sizeof(msgbuf));
+ local_irq_enable();
+ }
+ if (msgbuf[0]) {
+ print_fn_descriptor_symbol(KERN_WARNING "initcall %s", fn);
+ printk(" returned with %s\n", msgbuf);
+ }
+}
+
+
extern initcall_t __initcall_start[], __initcall_end[];
static void __init do_initcalls(void)
{
initcall_t *call;
- int count = preempt_count();
- for (call = __initcall_start; call < __initcall_end; call++) {
- ktime_t t0, t1, delta;
- char *msg = NULL;
- char msgbuf[40];
- int result;
-
- if (initcall_debug) {
- print_fn_descriptor_symbol("calling %s()\n",
- (unsigned long) *call);
- t0 = ktime_get();
- }
-
- result = (*call)();
-
- if (initcall_debug) {
- t1 = ktime_get();
- delta = ktime_sub(t1, t0);
-
- print_fn_descriptor_symbol("initcall %s()",
- (unsigned long) *call);
- printk(" returned %d after %Ld msecs\n", result,
- (unsigned long long) delta.tv64 >> 20);
- }
-
- if (result && result != -ENODEV && initcall_debug) {
- sprintf(msgbuf, "error code %d", result);
- msg = msgbuf;
- }
- if (preempt_count() != count) {
- msg = "preemption imbalance";
- preempt_count() = count;
- }
- if (irqs_disabled()) {
- msg = "disabled interrupts";
- local_irq_enable();
- }
- if (msg) {
- print_fn_descriptor_symbol(KERN_WARNING "initcall %s()",
- (unsigned long) *call);
- printk(" returned with %s\n", msg);
- }
- }
+ for (call = __initcall_start; call < __initcall_end; call++)
+ do_one_initcall(*call);
/* Make sure there is no pending stuff from the initcall sequence */
flush_scheduled_work();
diff --git a/ipc/msg.c b/ipc/msg.c
index 32494e8..b4eee1c 100644
--- a/ipc/msg.c
+++ b/ipc/msg.c
@@ -98,20 +98,15 @@
if (allowed < MSGMNI) {
ns->msg_ctlmni = MSGMNI;
- goto out_callback;
+ return;
}
if (allowed > IPCMNI / nb_ns) {
ns->msg_ctlmni = IPCMNI / nb_ns;
- goto out_callback;
+ return;
}
ns->msg_ctlmni = allowed;
-
-out_callback:
-
- printk(KERN_INFO "msgmni has been set to %d for ipc namespace %p\n",
- ns->msg_ctlmni, ns);
}
void msg_init_ns(struct ipc_namespace *ns)
@@ -136,6 +131,10 @@
void __init msg_init(void)
{
msg_init_ns(&init_ipc_ns);
+
+ printk(KERN_INFO "msgmni has been set to %d\n",
+ init_ipc_ns.msg_ctlmni);
+
ipc_init_proc_interface("sysvipc/msg",
" key msqid perms cbytes qnum lspid lrpid uid gid cuid cgid stime rtime ctime\n",
IPC_MSG_IDS, sysvipc_msg_proc_show);
diff --git a/ipc/shm.c b/ipc/shm.c
index 554429a..790240c 100644
--- a/ipc/shm.c
+++ b/ipc/shm.c
@@ -894,8 +894,6 @@
if (!sfd)
goto out_put_dentry;
- err = -ENOMEM;
-
file = alloc_file(path.mnt, path.dentry, f_mode, &shm_file_operations);
if (!file)
goto out_free;
@@ -1060,16 +1058,16 @@
static int sysvipc_shm_proc_show(struct seq_file *s, void *it)
{
struct shmid_kernel *shp = it;
- char *format;
-#define SMALL_STRING "%10d %10d %4o %10u %5u %5u %5d %5u %5u %5u %5u %10lu %10lu %10lu\n"
-#define BIG_STRING "%10d %10d %4o %21u %5u %5u %5d %5u %5u %5u %5u %10lu %10lu %10lu\n"
+#if BITS_PER_LONG <= 32
+#define SIZE_SPEC "%10lu"
+#else
+#define SIZE_SPEC "%21lu"
+#endif
- if (sizeof(size_t) <= sizeof(int))
- format = SMALL_STRING;
- else
- format = BIG_STRING;
- return seq_printf(s, format,
+ return seq_printf(s,
+ "%10d %10d %4o " SIZE_SPEC " %5u %5u "
+ "%5lu %5u %5u %5u %5u %10lu %10lu %10lu\n",
shp->shm_perm.key,
shp->shm_perm.id,
shp->shm_perm.mode,
diff --git a/kernel/audit.c b/kernel/audit.c
index b7d3709..e8692a5 100644
--- a/kernel/audit.c
+++ b/kernel/audit.c
@@ -572,16 +572,17 @@
skb = audit_make_reply(pid, seq, type, done, multi, payload, size);
if (!skb)
- return;
+ goto out;
reply->pid = pid;
reply->skb = skb;
tsk = kthread_run(audit_send_reply_thread, reply, "audit_send_reply");
- if (IS_ERR(tsk)) {
- kfree(reply);
- kfree_skb(skb);
- }
+ if (!IS_ERR(tsk))
+ return;
+ kfree_skb(skb);
+out:
+ kfree(reply);
}
/*
diff --git a/kernel/audit_tree.c b/kernel/audit_tree.c
index 9ef5e0a..f7921a2 100644
--- a/kernel/audit_tree.c
+++ b/kernel/audit_tree.c
@@ -172,10 +172,9 @@
struct audit_chunk *audit_tree_lookup(const struct inode *inode)
{
struct list_head *list = chunk_hash(inode);
- struct list_head *pos;
+ struct audit_chunk *p;
- list_for_each_rcu(pos, list) {
- struct audit_chunk *p = container_of(pos, struct audit_chunk, hash);
+ list_for_each_entry_rcu(p, list, hash) {
if (p->watch.inode == inode) {
get_inotify_watch(&p->watch);
return p;
diff --git a/kernel/capability.c b/kernel/capability.c
index 39e8193..cfbe442 100644
--- a/kernel/capability.c
+++ b/kernel/capability.c
@@ -53,6 +53,69 @@
}
/*
+ * Version 2 capabilities worked fine, but the linux/capability.h file
+ * that accompanied their introduction encouraged their use without
+ * the necessary user-space source code changes. As such, we have
+ * created a version 3 with equivalent functionality to version 2, but
+ * with a header change to protect legacy source code from using
+ * version 2 when it wanted to use version 1. If your system has code
+ * that trips the following warning, it is using version 2 specific
+ * capabilities and may be doing so insecurely.
+ *
+ * The remedy is to either upgrade your version of libcap (to 2.10+,
+ * if the application is linked against it), or recompile your
+ * application with modern kernel headers and this warning will go
+ * away.
+ */
+
+static void warn_deprecated_v2(void)
+{
+ static int warned;
+
+ if (!warned) {
+ char name[sizeof(current->comm)];
+
+ printk(KERN_INFO "warning: `%s' uses deprecated v2"
+ " capabilities in a way that may be insecure.\n",
+ get_task_comm(name, current));
+ warned = 1;
+ }
+}
+
+/*
+ * Version check. Return the number of u32s in each capability flag
+ * array, or a negative value on error.
+ */
+static int cap_validate_magic(cap_user_header_t header, unsigned *tocopy)
+{
+ __u32 version;
+
+ if (get_user(version, &header->version))
+ return -EFAULT;
+
+ switch (version) {
+ case _LINUX_CAPABILITY_VERSION_1:
+ warn_legacy_capability_use();
+ *tocopy = _LINUX_CAPABILITY_U32S_1;
+ break;
+ case _LINUX_CAPABILITY_VERSION_2:
+ warn_deprecated_v2();
+ /*
+ * fall through - v3 is otherwise equivalent to v2.
+ */
+ case _LINUX_CAPABILITY_VERSION_3:
+ *tocopy = _LINUX_CAPABILITY_U32S_3;
+ break;
+ default:
+ if (put_user((u32)_KERNEL_CAPABILITY_VERSION, &header->version))
+ return -EFAULT;
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/*
* For sys_getproccap() and sys_setproccap(), any of the three
* capability set pointers may be NULL -- indicating that that set is
* uninteresting and/or not to be changed.
@@ -71,27 +134,13 @@
{
int ret = 0;
pid_t pid;
- __u32 version;
struct task_struct *target;
unsigned tocopy;
kernel_cap_t pE, pI, pP;
- if (get_user(version, &header->version))
- return -EFAULT;
-
- switch (version) {
- case _LINUX_CAPABILITY_VERSION_1:
- warn_legacy_capability_use();
- tocopy = _LINUX_CAPABILITY_U32S_1;
- break;
- case _LINUX_CAPABILITY_VERSION_2:
- tocopy = _LINUX_CAPABILITY_U32S_2;
- break;
- default:
- if (put_user(_LINUX_CAPABILITY_VERSION, &header->version))
- return -EFAULT;
- return -EINVAL;
- }
+ ret = cap_validate_magic(header, &tocopy);
+ if (ret != 0)
+ return ret;
if (get_user(pid, &header->pid))
return -EFAULT;
@@ -118,7 +167,7 @@
spin_unlock(&task_capability_lock);
if (!ret) {
- struct __user_cap_data_struct kdata[_LINUX_CAPABILITY_U32S];
+ struct __user_cap_data_struct kdata[_KERNEL_CAPABILITY_U32S];
unsigned i;
for (i = 0; i < tocopy; i++) {
@@ -128,7 +177,7 @@
}
/*
- * Note, in the case, tocopy < _LINUX_CAPABILITY_U32S,
+ * Note, in the case, tocopy < _KERNEL_CAPABILITY_U32S,
* we silently drop the upper capabilities here. This
* has the effect of making older libcap
* implementations implicitly drop upper capability
@@ -240,30 +289,16 @@
*/
asmlinkage long sys_capset(cap_user_header_t header, const cap_user_data_t data)
{
- struct __user_cap_data_struct kdata[_LINUX_CAPABILITY_U32S];
+ struct __user_cap_data_struct kdata[_KERNEL_CAPABILITY_U32S];
unsigned i, tocopy;
kernel_cap_t inheritable, permitted, effective;
- __u32 version;
struct task_struct *target;
int ret;
pid_t pid;
- if (get_user(version, &header->version))
- return -EFAULT;
-
- switch (version) {
- case _LINUX_CAPABILITY_VERSION_1:
- warn_legacy_capability_use();
- tocopy = _LINUX_CAPABILITY_U32S_1;
- break;
- case _LINUX_CAPABILITY_VERSION_2:
- tocopy = _LINUX_CAPABILITY_U32S_2;
- break;
- default:
- if (put_user(_LINUX_CAPABILITY_VERSION, &header->version))
- return -EFAULT;
- return -EINVAL;
- }
+ ret = cap_validate_magic(header, &tocopy);
+ if (ret != 0)
+ return ret;
if (get_user(pid, &header->pid))
return -EFAULT;
@@ -281,7 +316,7 @@
permitted.cap[i] = kdata[i].permitted;
inheritable.cap[i] = kdata[i].inheritable;
}
- while (i < _LINUX_CAPABILITY_U32S) {
+ while (i < _KERNEL_CAPABILITY_U32S) {
effective.cap[i] = 0;
permitted.cap[i] = 0;
inheritable.cap[i] = 0;
diff --git a/kernel/cgroup.c b/kernel/cgroup.c
index fbc6fc89..15ac0e1 100644
--- a/kernel/cgroup.c
+++ b/kernel/cgroup.c
@@ -2903,7 +2903,7 @@
cg = tsk->cgroups;
parent = task_cgroup(tsk, subsys->subsys_id);
- snprintf(nodename, MAX_CGROUP_TYPE_NAMELEN, "node_%d", tsk->pid);
+ snprintf(nodename, MAX_CGROUP_TYPE_NAMELEN, "%d", tsk->pid);
/* Pin the hierarchy */
atomic_inc(&parent->root->sb->s_active);
diff --git a/kernel/cpuset.c b/kernel/cpuset.c
index 86ea9e3..039baa4 100644
--- a/kernel/cpuset.c
+++ b/kernel/cpuset.c
@@ -797,8 +797,10 @@
retval = cpulist_parse(buf, trialcs.cpus_allowed);
if (retval < 0)
return retval;
+
+ if (!cpus_subset(trialcs.cpus_allowed, cpu_online_map))
+ return -EINVAL;
}
- cpus_and(trialcs.cpus_allowed, trialcs.cpus_allowed, cpu_online_map);
retval = validate_change(cs, &trialcs);
if (retval < 0)
return retval;
@@ -932,9 +934,11 @@
retval = nodelist_parse(buf, trialcs.mems_allowed);
if (retval < 0)
goto done;
+
+ if (!nodes_subset(trialcs.mems_allowed,
+ node_states[N_HIGH_MEMORY]))
+ return -EINVAL;
}
- nodes_and(trialcs.mems_allowed, trialcs.mems_allowed,
- node_states[N_HIGH_MEMORY]);
oldmem = cs->mems_allowed;
if (nodes_equal(oldmem, trialcs.mems_allowed)) {
retval = 0; /* Too easy - nothing to do */
diff --git a/kernel/exit.c b/kernel/exit.c
index 1510f78..8f6185e 100644
--- a/kernel/exit.c
+++ b/kernel/exit.c
@@ -126,6 +126,12 @@
__unhash_process(tsk);
+ /*
+ * Do this under ->siglock, we can race with another thread
+ * doing sigqueue_free() if we have SIGQUEUE_PREALLOC signals.
+ */
+ flush_sigqueue(&tsk->pending);
+
tsk->signal = NULL;
tsk->sighand = NULL;
spin_unlock(&sighand->siglock);
@@ -133,7 +139,6 @@
__cleanup_sighand(sighand);
clear_tsk_thread_flag(tsk,TIF_SIGPENDING);
- flush_sigqueue(&tsk->pending);
if (sig) {
flush_sigqueue(&sig->shared_pending);
taskstats_tgid_free(sig);
diff --git a/kernel/fork.c b/kernel/fork.c
index 933e60e..19908b2 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -660,136 +660,6 @@
return 0;
}
-static int count_open_files(struct fdtable *fdt)
-{
- int size = fdt->max_fds;
- int i;
-
- /* Find the last open fd */
- for (i = size/(8*sizeof(long)); i > 0; ) {
- if (fdt->open_fds->fds_bits[--i])
- break;
- }
- i = (i+1) * 8 * sizeof(long);
- return i;
-}
-
-static struct files_struct *alloc_files(void)
-{
- struct files_struct *newf;
- struct fdtable *fdt;
-
- newf = kmem_cache_alloc(files_cachep, GFP_KERNEL);
- if (!newf)
- goto out;
-
- atomic_set(&newf->count, 1);
-
- spin_lock_init(&newf->file_lock);
- newf->next_fd = 0;
- fdt = &newf->fdtab;
- fdt->max_fds = NR_OPEN_DEFAULT;
- fdt->close_on_exec = (fd_set *)&newf->close_on_exec_init;
- fdt->open_fds = (fd_set *)&newf->open_fds_init;
- fdt->fd = &newf->fd_array[0];
- INIT_RCU_HEAD(&fdt->rcu);
- fdt->next = NULL;
- rcu_assign_pointer(newf->fdt, fdt);
-out:
- return newf;
-}
-
-/*
- * Allocate a new files structure and copy contents from the
- * passed in files structure.
- * errorp will be valid only when the returned files_struct is NULL.
- */
-static struct files_struct *dup_fd(struct files_struct *oldf, int *errorp)
-{
- struct files_struct *newf;
- struct file **old_fds, **new_fds;
- int open_files, size, i;
- struct fdtable *old_fdt, *new_fdt;
-
- *errorp = -ENOMEM;
- newf = alloc_files();
- if (!newf)
- goto out;
-
- spin_lock(&oldf->file_lock);
- old_fdt = files_fdtable(oldf);
- new_fdt = files_fdtable(newf);
- open_files = count_open_files(old_fdt);
-
- /*
- * Check whether we need to allocate a larger fd array and fd set.
- * Note: we're not a clone task, so the open count won't change.
- */
- if (open_files > new_fdt->max_fds) {
- new_fdt->max_fds = 0;
- spin_unlock(&oldf->file_lock);
- spin_lock(&newf->file_lock);
- *errorp = expand_files(newf, open_files-1);
- spin_unlock(&newf->file_lock);
- if (*errorp < 0)
- goto out_release;
- new_fdt = files_fdtable(newf);
- /*
- * Reacquire the oldf lock and a pointer to its fd table
- * who knows it may have a new bigger fd table. We need
- * the latest pointer.
- */
- spin_lock(&oldf->file_lock);
- old_fdt = files_fdtable(oldf);
- }
-
- old_fds = old_fdt->fd;
- new_fds = new_fdt->fd;
-
- memcpy(new_fdt->open_fds->fds_bits,
- old_fdt->open_fds->fds_bits, open_files/8);
- memcpy(new_fdt->close_on_exec->fds_bits,
- old_fdt->close_on_exec->fds_bits, open_files/8);
-
- for (i = open_files; i != 0; i--) {
- struct file *f = *old_fds++;
- if (f) {
- get_file(f);
- } else {
- /*
- * The fd may be claimed in the fd bitmap but not yet
- * instantiated in the files array if a sibling thread
- * is partway through open(). So make sure that this
- * fd is available to the new process.
- */
- FD_CLR(open_files - i, new_fdt->open_fds);
- }
- rcu_assign_pointer(*new_fds++, f);
- }
- spin_unlock(&oldf->file_lock);
-
- /* compute the remainder to be cleared */
- size = (new_fdt->max_fds - open_files) * sizeof(struct file *);
-
- /* This is long word aligned thus could use a optimized version */
- memset(new_fds, 0, size);
-
- if (new_fdt->max_fds > open_files) {
- int left = (new_fdt->max_fds-open_files)/8;
- int start = open_files / (8 * sizeof(unsigned long));
-
- memset(&new_fdt->open_fds->fds_bits[start], 0, left);
- memset(&new_fdt->close_on_exec->fds_bits[start], 0, left);
- }
-
- return newf;
-
-out_release:
- kmem_cache_free(files_cachep, newf);
-out:
- return NULL;
-}
-
static int copy_files(unsigned long clone_flags, struct task_struct * tsk)
{
struct files_struct *oldf, *newf;
diff --git a/kernel/kgdb.c b/kernel/kgdb.c
index 39e31a0..79e3c90 100644
--- a/kernel/kgdb.c
+++ b/kernel/kgdb.c
@@ -52,6 +52,7 @@
#include <asm/byteorder.h>
#include <asm/atomic.h>
#include <asm/system.h>
+#include <asm/unaligned.h>
static int kgdb_break_asap;
@@ -227,8 +228,6 @@
* GDB remote protocol parser:
*/
-static const char hexchars[] = "0123456789abcdef";
-
static int hex(char ch)
{
if ((ch >= 'a') && (ch <= 'f'))
@@ -316,8 +315,8 @@
}
kgdb_io_ops->write_char('#');
- kgdb_io_ops->write_char(hexchars[checksum >> 4]);
- kgdb_io_ops->write_char(hexchars[checksum & 0xf]);
+ kgdb_io_ops->write_char(hex_asc_hi(checksum));
+ kgdb_io_ops->write_char(hex_asc_lo(checksum));
if (kgdb_io_ops->flush)
kgdb_io_ops->flush();
@@ -346,14 +345,6 @@
}
}
-static char *pack_hex_byte(char *pkt, u8 byte)
-{
- *pkt++ = hexchars[byte >> 4];
- *pkt++ = hexchars[byte & 0xf];
-
- return pkt;
-}
-
/*
* Convert the memory pointed to by mem into hex, placing result in buf.
* Return a pointer to the last char put in buf (null). May return an error.
@@ -486,8 +477,8 @@
{
error = -error;
pkt[0] = 'E';
- pkt[1] = hexchars[(error / 10)];
- pkt[2] = hexchars[(error % 10)];
+ pkt[1] = hex_asc[(error / 10)];
+ pkt[2] = hex_asc[(error % 10)];
pkt[3] = '\0';
}
@@ -518,10 +509,7 @@
scan = (unsigned char *)id;
while (i--)
*scan++ = 0;
- *scan++ = (value >> 24) & 0xff;
- *scan++ = (value >> 16) & 0xff;
- *scan++ = (value >> 8) & 0xff;
- *scan++ = (value & 0xff);
+ put_unaligned_be32(value, scan);
}
static struct task_struct *getthread(struct pt_regs *regs, int tid)
diff --git a/kernel/kprobes.c b/kernel/kprobes.c
index 1e0250c..d4998f8 100644
--- a/kernel/kprobes.c
+++ b/kernel/kprobes.c
@@ -699,8 +699,9 @@
return -EINVAL;
for (i = 0; i < num; i++) {
ret = __register_kprobe(kps[i], called_from);
- if (ret < 0 && i > 0) {
- unregister_kprobes(kps, i);
+ if (ret < 0) {
+ if (i > 0)
+ unregister_kprobes(kps, i);
break;
}
}
@@ -776,8 +777,9 @@
jp->kp.break_handler = longjmp_break_handler;
ret = __register_kprobe(&jp->kp, called_from);
}
- if (ret < 0 && i > 0) {
- unregister_jprobes(jps, i);
+ if (ret < 0) {
+ if (i > 0)
+ unregister_jprobes(jps, i);
break;
}
}
@@ -920,8 +922,9 @@
return -EINVAL;
for (i = 0; i < num; i++) {
ret = __register_kretprobe(rps[i], called_from);
- if (ret < 0 && i > 0) {
- unregister_kretprobes(rps, i);
+ if (ret < 0) {
+ if (i > 0)
+ unregister_kretprobes(rps, i);
break;
}
}
diff --git a/kernel/module.c b/kernel/module.c
index f5e9491..5f80478 100644
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -1337,7 +1337,19 @@
kobject_put(&mod->mkobj.kobj);
return err;
}
-#endif
+
+static void mod_sysfs_fini(struct module *mod)
+{
+ kobject_put(&mod->mkobj.kobj);
+}
+
+#else /* CONFIG_SYSFS */
+
+static void mod_sysfs_fini(struct module *mod)
+{
+}
+
+#endif /* CONFIG_SYSFS */
static void mod_kobject_remove(struct module *mod)
{
@@ -1345,7 +1357,7 @@
module_param_sysfs_remove(mod);
kobject_put(mod->mkobj.drivers_dir);
kobject_put(mod->holders_dir);
- kobject_put(&mod->mkobj.kobj);
+ mod_sysfs_fini(mod);
}
/*
@@ -1780,7 +1792,7 @@
/* Sanity checks against insmoding binaries or wrong arch,
weird elf version */
- if (memcmp(hdr->e_ident, ELFMAG, 4) != 0
+ if (memcmp(hdr->e_ident, ELFMAG, SELFMAG) != 0
|| hdr->e_type != ET_REL
|| !elf_check_arch(hdr)
|| hdr->e_shentsize != sizeof(*sechdrs)) {
diff --git a/kernel/relay.c b/kernel/relay.c
index bc24dcd..7de644c 100644
--- a/kernel/relay.c
+++ b/kernel/relay.c
@@ -1191,7 +1191,7 @@
ret = 0;
spliced = 0;
- while (len) {
+ while (len && !spliced) {
ret = subbuf_splice_actor(in, ppos, pipe, len, flags, &nonpad_ret);
if (ret < 0)
break;
diff --git a/kernel/sched.c b/kernel/sched.c
index 8841a91..eaf6751 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -136,7 +136,7 @@
static inline int rt_policy(int policy)
{
- if (unlikely(policy == SCHED_FIFO) || unlikely(policy == SCHED_RR))
+ if (unlikely(policy == SCHED_FIFO || policy == SCHED_RR))
return 1;
return 0;
}
@@ -312,12 +312,15 @@
#endif
/*
- * A weight of 0, 1 or ULONG_MAX can cause arithmetics problems.
+ * A weight of 0 or 1 can cause arithmetics problems.
+ * A weight of a cfs_rq is the sum of weights of which entities
+ * are queued on this cfs_rq, so a weight of a entity should not be
+ * too large, so as the shares value of a task group.
* (The default weight is 1024 - so there's no practical
* limitation from this.)
*/
#define MIN_SHARES 2
-#define MAX_SHARES (ULONG_MAX - 1)
+#define MAX_SHARES (1UL << 18)
static int init_task_group_load = INIT_TASK_GROUP_LOAD;
#endif
@@ -398,43 +401,6 @@
*/
struct list_head leaf_cfs_rq_list;
struct task_group *tg; /* group that "owns" this runqueue */
-
-#ifdef CONFIG_SMP
- unsigned long task_weight;
- unsigned long shares;
- /*
- * We need space to build a sched_domain wide view of the full task
- * group tree, in order to avoid depending on dynamic memory allocation
- * during the load balancing we place this in the per cpu task group
- * hierarchy. This limits the load balancing to one instance per cpu,
- * but more should not be needed anyway.
- */
- struct aggregate_struct {
- /*
- * load = weight(cpus) * f(tg)
- *
- * Where f(tg) is the recursive weight fraction assigned to
- * this group.
- */
- unsigned long load;
-
- /*
- * part of the group weight distributed to this span.
- */
- unsigned long shares;
-
- /*
- * The sum of all runqueue weights within this span.
- */
- unsigned long rq_weight;
-
- /*
- * Weight contributed by tasks; this is the part we can
- * influence by moving tasks around.
- */
- unsigned long task_weight;
- } aggregate;
-#endif
#endif
};
@@ -1368,17 +1334,19 @@
*/
#define SRR(x, y) (((x) + (1UL << ((y) - 1))) >> (y))
-/*
- * delta *= weight / lw
- */
static unsigned long
calc_delta_mine(unsigned long delta_exec, unsigned long weight,
struct load_weight *lw)
{
u64 tmp;
- if (!lw->inv_weight)
- lw->inv_weight = 1 + (WMULT_CONST-lw->weight/2)/(lw->weight+1);
+ if (!lw->inv_weight) {
+ if (BITS_PER_LONG > 32 && unlikely(lw->weight >= WMULT_CONST))
+ lw->inv_weight = 1;
+ else
+ lw->inv_weight = 1 + (WMULT_CONST-lw->weight/2)
+ / (lw->weight+1);
+ }
tmp = (u64)delta_exec * weight;
/*
@@ -1393,6 +1361,12 @@
return (unsigned long)min(tmp, (u64)(unsigned long)LONG_MAX);
}
+static inline unsigned long
+calc_delta_fair(unsigned long delta_exec, struct load_weight *lw)
+{
+ return calc_delta_mine(delta_exec, NICE_0_LOAD, lw);
+}
+
static inline void update_load_add(struct load_weight *lw, unsigned long inc)
{
lw->weight += inc;
@@ -1505,326 +1479,6 @@
static unsigned long target_load(int cpu, int type);
static unsigned long cpu_avg_load_per_task(int cpu);
static int task_hot(struct task_struct *p, u64 now, struct sched_domain *sd);
-
-#ifdef CONFIG_FAIR_GROUP_SCHED
-
-/*
- * Group load balancing.
- *
- * We calculate a few balance domain wide aggregate numbers; load and weight.
- * Given the pictures below, and assuming each item has equal weight:
- *
- * root 1 - thread
- * / | \ A - group
- * A 1 B
- * /|\ / \
- * C 2 D 3 4
- * | |
- * 5 6
- *
- * load:
- * A and B get 1/3-rd of the total load. C and D get 1/3-rd of A's 1/3-rd,
- * which equals 1/9-th of the total load.
- *
- * shares:
- * The weight of this group on the selected cpus.
- *
- * rq_weight:
- * Direct sum of all the cpu's their rq weight, e.g. A would get 3 while
- * B would get 2.
- *
- * task_weight:
- * Part of the rq_weight contributed by tasks; all groups except B would
- * get 1, B gets 2.
- */
-
-static inline struct aggregate_struct *
-aggregate(struct task_group *tg, struct sched_domain *sd)
-{
- return &tg->cfs_rq[sd->first_cpu]->aggregate;
-}
-
-typedef void (*aggregate_func)(struct task_group *, struct sched_domain *);
-
-/*
- * Iterate the full tree, calling @down when first entering a node and @up when
- * leaving it for the final time.
- */
-static
-void aggregate_walk_tree(aggregate_func down, aggregate_func up,
- struct sched_domain *sd)
-{
- struct task_group *parent, *child;
-
- rcu_read_lock();
- parent = &root_task_group;
-down:
- (*down)(parent, sd);
- list_for_each_entry_rcu(child, &parent->children, siblings) {
- parent = child;
- goto down;
-
-up:
- continue;
- }
- (*up)(parent, sd);
-
- child = parent;
- parent = parent->parent;
- if (parent)
- goto up;
- rcu_read_unlock();
-}
-
-/*
- * Calculate the aggregate runqueue weight.
- */
-static
-void aggregate_group_weight(struct task_group *tg, struct sched_domain *sd)
-{
- unsigned long rq_weight = 0;
- unsigned long task_weight = 0;
- int i;
-
- for_each_cpu_mask(i, sd->span) {
- rq_weight += tg->cfs_rq[i]->load.weight;
- task_weight += tg->cfs_rq[i]->task_weight;
- }
-
- aggregate(tg, sd)->rq_weight = rq_weight;
- aggregate(tg, sd)->task_weight = task_weight;
-}
-
-/*
- * Compute the weight of this group on the given cpus.
- */
-static
-void aggregate_group_shares(struct task_group *tg, struct sched_domain *sd)
-{
- unsigned long shares = 0;
- int i;
-
- for_each_cpu_mask(i, sd->span)
- shares += tg->cfs_rq[i]->shares;
-
- if ((!shares && aggregate(tg, sd)->rq_weight) || shares > tg->shares)
- shares = tg->shares;
-
- aggregate(tg, sd)->shares = shares;
-}
-
-/*
- * Compute the load fraction assigned to this group, relies on the aggregate
- * weight and this group's parent's load, i.e. top-down.
- */
-static
-void aggregate_group_load(struct task_group *tg, struct sched_domain *sd)
-{
- unsigned long load;
-
- if (!tg->parent) {
- int i;
-
- load = 0;
- for_each_cpu_mask(i, sd->span)
- load += cpu_rq(i)->load.weight;
-
- } else {
- load = aggregate(tg->parent, sd)->load;
-
- /*
- * shares is our weight in the parent's rq so
- * shares/parent->rq_weight gives our fraction of the load
- */
- load *= aggregate(tg, sd)->shares;
- load /= aggregate(tg->parent, sd)->rq_weight + 1;
- }
-
- aggregate(tg, sd)->load = load;
-}
-
-static void __set_se_shares(struct sched_entity *se, unsigned long shares);
-
-/*
- * Calculate and set the cpu's group shares.
- */
-static void
-__update_group_shares_cpu(struct task_group *tg, struct sched_domain *sd,
- int tcpu)
-{
- int boost = 0;
- unsigned long shares;
- unsigned long rq_weight;
-
- if (!tg->se[tcpu])
- return;
-
- rq_weight = tg->cfs_rq[tcpu]->load.weight;
-
- /*
- * If there are currently no tasks on the cpu pretend there is one of
- * average load so that when a new task gets to run here it will not
- * get delayed by group starvation.
- */
- if (!rq_weight) {
- boost = 1;
- rq_weight = NICE_0_LOAD;
- }
-
- /*
- * \Sum shares * rq_weight
- * shares = -----------------------
- * \Sum rq_weight
- *
- */
- shares = aggregate(tg, sd)->shares * rq_weight;
- shares /= aggregate(tg, sd)->rq_weight + 1;
-
- /*
- * record the actual number of shares, not the boosted amount.
- */
- tg->cfs_rq[tcpu]->shares = boost ? 0 : shares;
-
- if (shares < MIN_SHARES)
- shares = MIN_SHARES;
- else if (shares > MAX_SHARES)
- shares = MAX_SHARES;
-
- __set_se_shares(tg->se[tcpu], shares);
-}
-
-/*
- * Re-adjust the weights on the cpu the task came from and on the cpu the
- * task went to.
- */
-static void
-__move_group_shares(struct task_group *tg, struct sched_domain *sd,
- int scpu, int dcpu)
-{
- unsigned long shares;
-
- shares = tg->cfs_rq[scpu]->shares + tg->cfs_rq[dcpu]->shares;
-
- __update_group_shares_cpu(tg, sd, scpu);
- __update_group_shares_cpu(tg, sd, dcpu);
-
- /*
- * ensure we never loose shares due to rounding errors in the
- * above redistribution.
- */
- shares -= tg->cfs_rq[scpu]->shares + tg->cfs_rq[dcpu]->shares;
- if (shares)
- tg->cfs_rq[dcpu]->shares += shares;
-}
-
-/*
- * Because changing a group's shares changes the weight of the super-group
- * we need to walk up the tree and change all shares until we hit the root.
- */
-static void
-move_group_shares(struct task_group *tg, struct sched_domain *sd,
- int scpu, int dcpu)
-{
- while (tg) {
- __move_group_shares(tg, sd, scpu, dcpu);
- tg = tg->parent;
- }
-}
-
-static
-void aggregate_group_set_shares(struct task_group *tg, struct sched_domain *sd)
-{
- unsigned long shares = aggregate(tg, sd)->shares;
- int i;
-
- for_each_cpu_mask(i, sd->span) {
- struct rq *rq = cpu_rq(i);
- unsigned long flags;
-
- spin_lock_irqsave(&rq->lock, flags);
- __update_group_shares_cpu(tg, sd, i);
- spin_unlock_irqrestore(&rq->lock, flags);
- }
-
- aggregate_group_shares(tg, sd);
-
- /*
- * ensure we never loose shares due to rounding errors in the
- * above redistribution.
- */
- shares -= aggregate(tg, sd)->shares;
- if (shares) {
- tg->cfs_rq[sd->first_cpu]->shares += shares;
- aggregate(tg, sd)->shares += shares;
- }
-}
-
-/*
- * Calculate the accumulative weight and recursive load of each task group
- * while walking down the tree.
- */
-static
-void aggregate_get_down(struct task_group *tg, struct sched_domain *sd)
-{
- aggregate_group_weight(tg, sd);
- aggregate_group_shares(tg, sd);
- aggregate_group_load(tg, sd);
-}
-
-/*
- * Rebalance the cpu shares while walking back up the tree.
- */
-static
-void aggregate_get_up(struct task_group *tg, struct sched_domain *sd)
-{
- aggregate_group_set_shares(tg, sd);
-}
-
-static DEFINE_PER_CPU(spinlock_t, aggregate_lock);
-
-static void __init init_aggregate(void)
-{
- int i;
-
- for_each_possible_cpu(i)
- spin_lock_init(&per_cpu(aggregate_lock, i));
-}
-
-static int get_aggregate(struct sched_domain *sd)
-{
- if (!spin_trylock(&per_cpu(aggregate_lock, sd->first_cpu)))
- return 0;
-
- aggregate_walk_tree(aggregate_get_down, aggregate_get_up, sd);
- return 1;
-}
-
-static void put_aggregate(struct sched_domain *sd)
-{
- spin_unlock(&per_cpu(aggregate_lock, sd->first_cpu));
-}
-
-static void cfs_rq_set_shares(struct cfs_rq *cfs_rq, unsigned long shares)
-{
- cfs_rq->shares = shares;
-}
-
-#else
-
-static inline void init_aggregate(void)
-{
-}
-
-static inline int get_aggregate(struct sched_domain *sd)
-{
- return 0;
-}
-
-static inline void put_aggregate(struct sched_domain *sd)
-{
-}
-#endif
-
#else /* CONFIG_SMP */
#ifdef CONFIG_FAIR_GROUP_SCHED
@@ -1845,14 +1499,26 @@
#define sched_class_highest (&rt_sched_class)
-static void inc_nr_running(struct rq *rq)
+static inline void inc_load(struct rq *rq, const struct task_struct *p)
{
- rq->nr_running++;
+ update_load_add(&rq->load, p->se.load.weight);
}
-static void dec_nr_running(struct rq *rq)
+static inline void dec_load(struct rq *rq, const struct task_struct *p)
+{
+ update_load_sub(&rq->load, p->se.load.weight);
+}
+
+static void inc_nr_running(struct task_struct *p, struct rq *rq)
+{
+ rq->nr_running++;
+ inc_load(rq, p);
+}
+
+static void dec_nr_running(struct task_struct *p, struct rq *rq)
{
rq->nr_running--;
+ dec_load(rq, p);
}
static void set_load_weight(struct task_struct *p)
@@ -1944,7 +1610,7 @@
rq->nr_uninterruptible--;
enqueue_task(rq, p, wakeup);
- inc_nr_running(rq);
+ inc_nr_running(p, rq);
}
/*
@@ -1956,7 +1622,7 @@
rq->nr_uninterruptible++;
dequeue_task(rq, p, sleep);
- dec_nr_running(rq);
+ dec_nr_running(p, rq);
}
/**
@@ -2609,7 +2275,7 @@
* management (if any):
*/
p->sched_class->task_new(rq, p);
- inc_nr_running(rq);
+ inc_nr_running(p, rq);
}
check_preempt_curr(rq, p);
#ifdef CONFIG_SMP
@@ -3600,12 +3266,9 @@
unsigned long imbalance;
struct rq *busiest;
unsigned long flags;
- int unlock_aggregate;
cpus_setall(*cpus);
- unlock_aggregate = get_aggregate(sd);
-
/*
* When power savings policy is enabled for the parent domain, idle
* sibling can pick up load irrespective of busy siblings. In this case,
@@ -3721,9 +3384,8 @@
if (!ld_moved && !sd_idle && sd->flags & SD_SHARE_CPUPOWER &&
!test_sd_parent(sd, SD_POWERSAVINGS_BALANCE))
- ld_moved = -1;
-
- goto out;
+ return -1;
+ return ld_moved;
out_balanced:
schedstat_inc(sd, lb_balanced[idle]);
@@ -3738,13 +3400,8 @@
if (!sd_idle && sd->flags & SD_SHARE_CPUPOWER &&
!test_sd_parent(sd, SD_POWERSAVINGS_BALANCE))
- ld_moved = -1;
- else
- ld_moved = 0;
-out:
- if (unlock_aggregate)
- put_aggregate(sd);
- return ld_moved;
+ return -1;
+ return 0;
}
/*
@@ -4430,7 +4087,7 @@
* schedule() atomically, we ignore that path for now.
* Otherwise, whine if we are scheduling when we should not be.
*/
- if (unlikely(in_atomic_preempt_off()) && unlikely(!prev->exit_state))
+ if (unlikely(in_atomic_preempt_off() && !prev->exit_state))
__schedule_bug(prev);
profile_hit(SCHED_PROFILING, __builtin_return_address(0));
@@ -4510,12 +4167,10 @@
clear_tsk_need_resched(prev);
if (prev->state && !(preempt_count() & PREEMPT_ACTIVE)) {
- if (unlikely((prev->state & TASK_INTERRUPTIBLE) &&
- signal_pending(prev))) {
+ if (unlikely(signal_pending_state(prev->state, prev)))
prev->state = TASK_RUNNING;
- } else {
+ else
deactivate_task(rq, prev, 1);
- }
switch_count = &prev->nvcsw;
}
@@ -4931,8 +4586,10 @@
goto out_unlock;
}
on_rq = p->se.on_rq;
- if (on_rq)
+ if (on_rq) {
dequeue_task(rq, p, 0);
+ dec_load(rq, p);
+ }
p->static_prio = NICE_TO_PRIO(nice);
set_load_weight(p);
@@ -4942,6 +4599,7 @@
if (on_rq) {
enqueue_task(rq, p, 0);
+ inc_load(rq, p);
/*
* If the task increased its priority or is running and
* lowered its priority, then reschedule its CPU:
@@ -7316,7 +6974,6 @@
SD_INIT(sd, ALLNODES);
set_domain_attribute(sd, attr);
sd->span = *cpu_map;
- sd->first_cpu = first_cpu(sd->span);
cpu_to_allnodes_group(i, cpu_map, &sd->groups, tmpmask);
p = sd;
sd_allnodes = 1;
@@ -7327,7 +6984,6 @@
SD_INIT(sd, NODE);
set_domain_attribute(sd, attr);
sched_domain_node_span(cpu_to_node(i), &sd->span);
- sd->first_cpu = first_cpu(sd->span);
sd->parent = p;
if (p)
p->child = sd;
@@ -7339,7 +6995,6 @@
SD_INIT(sd, CPU);
set_domain_attribute(sd, attr);
sd->span = *nodemask;
- sd->first_cpu = first_cpu(sd->span);
sd->parent = p;
if (p)
p->child = sd;
@@ -7351,7 +7006,6 @@
SD_INIT(sd, MC);
set_domain_attribute(sd, attr);
sd->span = cpu_coregroup_map(i);
- sd->first_cpu = first_cpu(sd->span);
cpus_and(sd->span, sd->span, *cpu_map);
sd->parent = p;
p->child = sd;
@@ -7364,7 +7018,6 @@
SD_INIT(sd, SIBLING);
set_domain_attribute(sd, attr);
sd->span = per_cpu(cpu_sibling_map, i);
- sd->first_cpu = first_cpu(sd->span);
cpus_and(sd->span, sd->span, *cpu_map);
sd->parent = p;
p->child = sd;
@@ -7568,8 +7221,8 @@
static cpumask_t *doms_cur; /* current sched domains */
static int ndoms_cur; /* number of sched domains in 'doms_cur' */
-static struct sched_domain_attr *dattr_cur; /* attribues of custom domains
- in 'doms_cur' */
+static struct sched_domain_attr *dattr_cur;
+ /* attribues of custom domains in 'doms_cur' */
/*
* Special case: If a kmalloc of a doms_cur partition (array of
@@ -8034,7 +7687,6 @@
}
#ifdef CONFIG_SMP
- init_aggregate();
init_defrootdomain();
#endif
@@ -8599,11 +8251,14 @@
#endif
#ifdef CONFIG_FAIR_GROUP_SCHED
-static void __set_se_shares(struct sched_entity *se, unsigned long shares)
+static void set_se_shares(struct sched_entity *se, unsigned long shares)
{
struct cfs_rq *cfs_rq = se->cfs_rq;
+ struct rq *rq = cfs_rq->rq;
int on_rq;
+ spin_lock_irq(&rq->lock);
+
on_rq = se->on_rq;
if (on_rq)
dequeue_entity(cfs_rq, se, 0);
@@ -8613,17 +8268,8 @@
if (on_rq)
enqueue_entity(cfs_rq, se, 0);
-}
-static void set_se_shares(struct sched_entity *se, unsigned long shares)
-{
- struct cfs_rq *cfs_rq = se->cfs_rq;
- struct rq *rq = cfs_rq->rq;
- unsigned long flags;
-
- spin_lock_irqsave(&rq->lock, flags);
- __set_se_shares(se, shares);
- spin_unlock_irqrestore(&rq->lock, flags);
+ spin_unlock_irq(&rq->lock);
}
static DEFINE_MUTEX(shares_mutex);
@@ -8662,13 +8308,8 @@
* w/o tripping rebalance_share or load_balance_fair.
*/
tg->shares = shares;
- for_each_possible_cpu(i) {
- /*
- * force a rebalance
- */
- cfs_rq_set_shares(tg->cfs_rq[i], 0);
+ for_each_possible_cpu(i)
set_se_shares(tg->se[i], shares);
- }
/*
* Enable load balance activity on this group, by inserting it back on
@@ -8986,7 +8627,7 @@
#endif
#ifdef CONFIG_RT_GROUP_SCHED
-static ssize_t cpu_rt_runtime_write(struct cgroup *cgrp, struct cftype *cft,
+static int cpu_rt_runtime_write(struct cgroup *cgrp, struct cftype *cft,
s64 val)
{
return sched_group_set_rt_runtime(cgroup_tg(cgrp), val);
diff --git a/kernel/sched_clock.c b/kernel/sched_clock.c
index 9c597e3..ce05271 100644
--- a/kernel/sched_clock.c
+++ b/kernel/sched_clock.c
@@ -59,22 +59,26 @@
return &per_cpu(sched_clock_data, cpu);
}
+static __read_mostly int sched_clock_running;
+
void sched_clock_init(void)
{
u64 ktime_now = ktime_to_ns(ktime_get());
- u64 now = 0;
+ unsigned long now_jiffies = jiffies;
int cpu;
for_each_possible_cpu(cpu) {
struct sched_clock_data *scd = cpu_sdc(cpu);
scd->lock = (raw_spinlock_t)__RAW_SPIN_LOCK_UNLOCKED;
- scd->prev_jiffies = jiffies;
- scd->prev_raw = now;
- scd->tick_raw = now;
+ scd->prev_jiffies = now_jiffies;
+ scd->prev_raw = 0;
+ scd->tick_raw = 0;
scd->tick_gtod = ktime_now;
scd->clock = ktime_now;
}
+
+ sched_clock_running = 1;
}
/*
@@ -136,6 +140,9 @@
struct sched_clock_data *scd = cpu_sdc(cpu);
u64 now, clock;
+ if (unlikely(!sched_clock_running))
+ return 0ull;
+
WARN_ON_ONCE(!irqs_disabled());
now = sched_clock();
@@ -174,6 +181,9 @@
struct sched_clock_data *scd = this_scd();
u64 now, now_gtod;
+ if (unlikely(!sched_clock_running))
+ return;
+
WARN_ON_ONCE(!irqs_disabled());
now = sched_clock();
diff --git a/kernel/sched_debug.c b/kernel/sched_debug.c
index 5f06118..8bb7130 100644
--- a/kernel/sched_debug.c
+++ b/kernel/sched_debug.c
@@ -167,11 +167,6 @@
#endif
SEQ_printf(m, " .%-30s: %ld\n", "nr_spread_over",
cfs_rq->nr_spread_over);
-#ifdef CONFIG_FAIR_GROUP_SCHED
-#ifdef CONFIG_SMP
- SEQ_printf(m, " .%-30s: %lu\n", "shares", cfs_rq->shares);
-#endif
-#endif
}
static void print_cpu(struct seq_file *m, int cpu)
diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c
index e24ecd3..08ae848 100644
--- a/kernel/sched_fair.c
+++ b/kernel/sched_fair.c
@@ -334,34 +334,6 @@
#endif
/*
- * delta *= w / rw
- */
-static inline unsigned long
-calc_delta_weight(unsigned long delta, struct sched_entity *se)
-{
- for_each_sched_entity(se) {
- delta = calc_delta_mine(delta,
- se->load.weight, &cfs_rq_of(se)->load);
- }
-
- return delta;
-}
-
-/*
- * delta *= rw / w
- */
-static inline unsigned long
-calc_delta_fair(unsigned long delta, struct sched_entity *se)
-{
- for_each_sched_entity(se) {
- delta = calc_delta_mine(delta,
- cfs_rq_of(se)->load.weight, &se->load);
- }
-
- return delta;
-}
-
-/*
* The idea is to set a period in which each task runs once.
*
* When there are too many tasks (sysctl_sched_nr_latency) we have to stretch
@@ -390,54 +362,47 @@
*/
static u64 sched_slice(struct cfs_rq *cfs_rq, struct sched_entity *se)
{
- return calc_delta_weight(__sched_period(cfs_rq->nr_running), se);
+ u64 slice = __sched_period(cfs_rq->nr_running);
+
+ for_each_sched_entity(se) {
+ cfs_rq = cfs_rq_of(se);
+
+ slice *= se->load.weight;
+ do_div(slice, cfs_rq->load.weight);
+ }
+
+
+ return slice;
}
/*
* We calculate the vruntime slice of a to be inserted task
*
- * vs = s*rw/w = p
+ * vs = s/w = p/rw
*/
static u64 sched_vslice_add(struct cfs_rq *cfs_rq, struct sched_entity *se)
{
unsigned long nr_running = cfs_rq->nr_running;
+ unsigned long weight;
+ u64 vslice;
if (!se->on_rq)
nr_running++;
- return __sched_period(nr_running);
-}
-
-/*
- * The goal of calc_delta_asym() is to be asymmetrically around NICE_0_LOAD, in
- * that it favours >=0 over <0.
- *
- * -20 |
- * |
- * 0 --------+-------
- * .'
- * 19 .'
- *
- */
-static unsigned long
-calc_delta_asym(unsigned long delta, struct sched_entity *se)
-{
- struct load_weight lw = {
- .weight = NICE_0_LOAD,
- .inv_weight = 1UL << (WMULT_SHIFT-NICE_0_SHIFT)
- };
+ vslice = __sched_period(nr_running);
for_each_sched_entity(se) {
- struct load_weight *se_lw = &se->load;
+ cfs_rq = cfs_rq_of(se);
- if (se->load.weight < NICE_0_LOAD)
- se_lw = &lw;
+ weight = cfs_rq->load.weight;
+ if (!se->on_rq)
+ weight += se->load.weight;
- delta = calc_delta_mine(delta,
- cfs_rq_of(se)->load.weight, se_lw);
+ vslice *= NICE_0_LOAD;
+ do_div(vslice, weight);
}
- return delta;
+ return vslice;
}
/*
@@ -454,7 +419,11 @@
curr->sum_exec_runtime += delta_exec;
schedstat_add(cfs_rq, exec_clock, delta_exec);
- delta_exec_weighted = calc_delta_fair(delta_exec, curr);
+ delta_exec_weighted = delta_exec;
+ if (unlikely(curr->load.weight != NICE_0_LOAD)) {
+ delta_exec_weighted = calc_delta_fair(delta_exec_weighted,
+ &curr->load);
+ }
curr->vruntime += delta_exec_weighted;
}
@@ -541,27 +510,10 @@
* Scheduling class queueing methods:
*/
-#if defined CONFIG_SMP && defined CONFIG_FAIR_GROUP_SCHED
-static void
-add_cfs_task_weight(struct cfs_rq *cfs_rq, unsigned long weight)
-{
- cfs_rq->task_weight += weight;
-}
-#else
-static inline void
-add_cfs_task_weight(struct cfs_rq *cfs_rq, unsigned long weight)
-{
-}
-#endif
-
static void
account_entity_enqueue(struct cfs_rq *cfs_rq, struct sched_entity *se)
{
update_load_add(&cfs_rq->load, se->load.weight);
- if (!parent_entity(se))
- inc_cpu_load(rq_of(cfs_rq), se->load.weight);
- if (entity_is_task(se))
- add_cfs_task_weight(cfs_rq, se->load.weight);
cfs_rq->nr_running++;
se->on_rq = 1;
list_add(&se->group_node, &cfs_rq->tasks);
@@ -571,10 +523,6 @@
account_entity_dequeue(struct cfs_rq *cfs_rq, struct sched_entity *se)
{
update_load_sub(&cfs_rq->load, se->load.weight);
- if (!parent_entity(se))
- dec_cpu_load(rq_of(cfs_rq), se->load.weight);
- if (entity_is_task(se))
- add_cfs_task_weight(cfs_rq, -se->load.weight);
cfs_rq->nr_running--;
se->on_rq = 0;
list_del_init(&se->group_node);
@@ -661,17 +609,8 @@
if (!initial) {
/* sleeps upto a single latency don't count. */
- if (sched_feat(NEW_FAIR_SLEEPERS)) {
- unsigned long thresh = sysctl_sched_latency;
-
- /*
- * convert the sleeper threshold into virtual time
- */
- if (sched_feat(NORMALIZED_SLEEPER))
- thresh = calc_delta_fair(thresh, se);
-
- vruntime -= thresh;
- }
+ if (sched_feat(NEW_FAIR_SLEEPERS))
+ vruntime -= sysctl_sched_latency;
/* ensure we never gain time by being placed backwards. */
vruntime = max_vruntime(se->vruntime, vruntime);
@@ -1057,25 +996,12 @@
struct task_struct *curr = this_rq->curr;
unsigned long tl = this_load;
unsigned long tl_per_task;
+ int balanced;
- if (!(this_sd->flags & SD_WAKE_AFFINE))
+ if (!(this_sd->flags & SD_WAKE_AFFINE) || !sched_feat(AFFINE_WAKEUPS))
return 0;
/*
- * If the currently running task will sleep within
- * a reasonable amount of time then attract this newly
- * woken task:
- */
- if (sync && curr->sched_class == &fair_sched_class) {
- if (curr->se.avg_overlap < sysctl_sched_migration_cost &&
- p->se.avg_overlap < sysctl_sched_migration_cost)
- return 1;
- }
-
- schedstat_inc(p, se.nr_wakeups_affine_attempts);
- tl_per_task = cpu_avg_load_per_task(this_cpu);
-
- /*
* If sync wakeup then subtract the (maximum possible)
* effect of the currently running task from the load
* of the current CPU:
@@ -1083,8 +1009,24 @@
if (sync)
tl -= current->se.load.weight;
+ balanced = 100*(tl + p->se.load.weight) <= imbalance*load;
+
+ /*
+ * If the currently running task will sleep within
+ * a reasonable amount of time then attract this newly
+ * woken task:
+ */
+ if (sync && balanced && curr->sched_class == &fair_sched_class) {
+ if (curr->se.avg_overlap < sysctl_sched_migration_cost &&
+ p->se.avg_overlap < sysctl_sched_migration_cost)
+ return 1;
+ }
+
+ schedstat_inc(p, se.nr_wakeups_affine_attempts);
+ tl_per_task = cpu_avg_load_per_task(this_cpu);
+
if ((tl <= load && tl + target_load(prev_cpu, idx) <= tl_per_task) ||
- 100*(tl + p->se.load.weight) <= imbalance*load) {
+ balanced) {
/*
* This domain has SD_WAKE_AFFINE and
* p is cache cold in this domain, and
@@ -1169,10 +1111,11 @@
unsigned long gran = sysctl_sched_wakeup_granularity;
/*
- * More easily preempt - nice tasks, while not making it harder for
- * + nice tasks.
+ * More easily preempt - nice tasks, while not making
+ * it harder for + nice tasks.
*/
- gran = calc_delta_asym(sysctl_sched_wakeup_granularity, se);
+ if (unlikely(se->load.weight > NICE_0_LOAD))
+ gran = calc_delta_fair(gran, &se->load);
return gran;
}
@@ -1366,90 +1309,75 @@
return __load_balance_iterator(cfs_rq, cfs_rq->balance_iterator);
}
-static unsigned long
-__load_balance_fair(struct rq *this_rq, int this_cpu, struct rq *busiest,
- unsigned long max_load_move, struct sched_domain *sd,
- enum cpu_idle_type idle, int *all_pinned, int *this_best_prio,
- struct cfs_rq *cfs_rq)
+#ifdef CONFIG_FAIR_GROUP_SCHED
+static int cfs_rq_best_prio(struct cfs_rq *cfs_rq)
{
+ struct sched_entity *curr;
+ struct task_struct *p;
+
+ if (!cfs_rq->nr_running || !first_fair(cfs_rq))
+ return MAX_PRIO;
+
+ curr = cfs_rq->curr;
+ if (!curr)
+ curr = __pick_next_entity(cfs_rq);
+
+ p = task_of(curr);
+
+ return p->prio;
+}
+#endif
+
+static unsigned long
+load_balance_fair(struct rq *this_rq, int this_cpu, struct rq *busiest,
+ unsigned long max_load_move,
+ struct sched_domain *sd, enum cpu_idle_type idle,
+ int *all_pinned, int *this_best_prio)
+{
+ struct cfs_rq *busy_cfs_rq;
+ long rem_load_move = max_load_move;
struct rq_iterator cfs_rq_iterator;
cfs_rq_iterator.start = load_balance_start_fair;
cfs_rq_iterator.next = load_balance_next_fair;
- cfs_rq_iterator.arg = cfs_rq;
- return balance_tasks(this_rq, this_cpu, busiest,
- max_load_move, sd, idle, all_pinned,
- this_best_prio, &cfs_rq_iterator);
-}
-
+ for_each_leaf_cfs_rq(busiest, busy_cfs_rq) {
#ifdef CONFIG_FAIR_GROUP_SCHED
-static unsigned long
-load_balance_fair(struct rq *this_rq, int this_cpu, struct rq *busiest,
- unsigned long max_load_move,
- struct sched_domain *sd, enum cpu_idle_type idle,
- int *all_pinned, int *this_best_prio)
-{
- long rem_load_move = max_load_move;
- int busiest_cpu = cpu_of(busiest);
- struct task_group *tg;
-
- rcu_read_lock();
- list_for_each_entry(tg, &task_groups, list) {
+ struct cfs_rq *this_cfs_rq;
long imbalance;
- unsigned long this_weight, busiest_weight;
- long rem_load, max_load, moved_load;
+ unsigned long maxload;
+ this_cfs_rq = cpu_cfs_rq(busy_cfs_rq, this_cpu);
+
+ imbalance = busy_cfs_rq->load.weight - this_cfs_rq->load.weight;
+ /* Don't pull if this_cfs_rq has more load than busy_cfs_rq */
+ if (imbalance <= 0)
+ continue;
+
+ /* Don't pull more than imbalance/2 */
+ imbalance /= 2;
+ maxload = min(rem_load_move, imbalance);
+
+ *this_best_prio = cfs_rq_best_prio(this_cfs_rq);
+#else
+# define maxload rem_load_move
+#endif
/*
- * empty group
+ * pass busy_cfs_rq argument into
+ * load_balance_[start|next]_fair iterators
*/
- if (!aggregate(tg, sd)->task_weight)
- continue;
+ cfs_rq_iterator.arg = busy_cfs_rq;
+ rem_load_move -= balance_tasks(this_rq, this_cpu, busiest,
+ maxload, sd, idle, all_pinned,
+ this_best_prio,
+ &cfs_rq_iterator);
- rem_load = rem_load_move * aggregate(tg, sd)->rq_weight;
- rem_load /= aggregate(tg, sd)->load + 1;
-
- this_weight = tg->cfs_rq[this_cpu]->task_weight;
- busiest_weight = tg->cfs_rq[busiest_cpu]->task_weight;
-
- imbalance = (busiest_weight - this_weight) / 2;
-
- if (imbalance < 0)
- imbalance = busiest_weight;
-
- max_load = max(rem_load, imbalance);
- moved_load = __load_balance_fair(this_rq, this_cpu, busiest,
- max_load, sd, idle, all_pinned, this_best_prio,
- tg->cfs_rq[busiest_cpu]);
-
- if (!moved_load)
- continue;
-
- move_group_shares(tg, sd, busiest_cpu, this_cpu);
-
- moved_load *= aggregate(tg, sd)->load;
- moved_load /= aggregate(tg, sd)->rq_weight + 1;
-
- rem_load_move -= moved_load;
- if (rem_load_move < 0)
+ if (rem_load_move <= 0)
break;
}
- rcu_read_unlock();
return max_load_move - rem_load_move;
}
-#else
-static unsigned long
-load_balance_fair(struct rq *this_rq, int this_cpu, struct rq *busiest,
- unsigned long max_load_move,
- struct sched_domain *sd, enum cpu_idle_type idle,
- int *all_pinned, int *this_best_prio)
-{
- return __load_balance_fair(this_rq, this_cpu, busiest,
- max_load_move, sd, idle, all_pinned,
- this_best_prio, &busiest->cfs);
-}
-#endif
static int
move_one_task_fair(struct rq *this_rq, int this_cpu, struct rq *busiest,
diff --git a/kernel/sched_rt.c b/kernel/sched_rt.c
index 060e87b..3432d57 100644
--- a/kernel/sched_rt.c
+++ b/kernel/sched_rt.c
@@ -513,8 +513,6 @@
*/
for_each_sched_rt_entity(rt_se)
enqueue_rt_entity(rt_se);
-
- inc_cpu_load(rq, p->se.load.weight);
}
static void dequeue_task_rt(struct rq *rq, struct task_struct *p, int sleep)
@@ -534,8 +532,6 @@
if (rt_rq && rt_rq->rt_nr_running)
enqueue_rt_entity(rt_se);
}
-
- dec_cpu_load(rq, p->se.load.weight);
}
/*
diff --git a/kernel/sched_stats.h b/kernel/sched_stats.h
index 5bae2e0..a38878e 100644
--- a/kernel/sched_stats.h
+++ b/kernel/sched_stats.h
@@ -67,6 +67,7 @@
preempt_enable();
#endif
}
+ kfree(mask_str);
return 0;
}
diff --git a/kernel/signal.c b/kernel/signal.c
index 72bb4f5..6c0958e 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -231,6 +231,40 @@
spin_unlock_irqrestore(&t->sighand->siglock, flags);
}
+static void __flush_itimer_signals(struct sigpending *pending)
+{
+ sigset_t signal, retain;
+ struct sigqueue *q, *n;
+
+ signal = pending->signal;
+ sigemptyset(&retain);
+
+ list_for_each_entry_safe(q, n, &pending->list, list) {
+ int sig = q->info.si_signo;
+
+ if (likely(q->info.si_code != SI_TIMER)) {
+ sigaddset(&retain, sig);
+ } else {
+ sigdelset(&signal, sig);
+ list_del_init(&q->list);
+ __sigqueue_free(q);
+ }
+ }
+
+ sigorsets(&pending->signal, &signal, &retain);
+}
+
+void flush_itimer_signals(void)
+{
+ struct task_struct *tsk = current;
+ unsigned long flags;
+
+ spin_lock_irqsave(&tsk->sighand->siglock, flags);
+ __flush_itimer_signals(&tsk->pending);
+ __flush_itimer_signals(&tsk->signal->shared_pending);
+ spin_unlock_irqrestore(&tsk->sighand->siglock, flags);
+}
+
void ignore_signals(struct task_struct *t)
{
int i;
@@ -1240,17 +1274,22 @@
BUG_ON(!(q->flags & SIGQUEUE_PREALLOC));
/*
- * If the signal is still pending remove it from the
- * pending queue. We must hold ->siglock while testing
- * q->list to serialize with collect_signal().
+ * We must hold ->siglock while testing q->list
+ * to serialize with collect_signal() or with
+ * __exit_signal()->flush_sigqueue().
*/
spin_lock_irqsave(lock, flags);
+ q->flags &= ~SIGQUEUE_PREALLOC;
+ /*
+ * If it is queued it will be freed when dequeued,
+ * like the "regular" sigqueue.
+ */
if (!list_empty(&q->list))
- list_del_init(&q->list);
+ q = NULL;
spin_unlock_irqrestore(lock, flags);
- q->flags &= ~SIGQUEUE_PREALLOC;
- __sigqueue_free(q);
+ if (q)
+ __sigqueue_free(q);
}
int send_sigqueue(struct sigqueue *q, struct task_struct *t, int group)
diff --git a/kernel/stop_machine.c b/kernel/stop_machine.c
index 0101aee..b7350bb 100644
--- a/kernel/stop_machine.c
+++ b/kernel/stop_machine.c
@@ -62,8 +62,7 @@
* help our sisters onto their CPUs. */
if (!prepared && !irqs_disabled)
yield();
- else
- cpu_relax();
+ cpu_relax();
}
/* Ack: we are exiting. */
@@ -106,8 +105,10 @@
}
/* Wait for them all to come to life. */
- while (atomic_read(&stopmachine_thread_ack) != stopmachine_num_threads)
+ while (atomic_read(&stopmachine_thread_ack) != stopmachine_num_threads) {
yield();
+ cpu_relax();
+ }
/* If some failed, kill them all. */
if (ret < 0) {
diff --git a/kernel/sys.c b/kernel/sys.c
index 895d2d4..14e9728 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -1652,7 +1652,7 @@
asmlinkage long sys_prctl(int option, unsigned long arg2, unsigned long arg3,
unsigned long arg4, unsigned long arg5)
{
- long uninitialized_var(error);
+ long error = 0;
if (security_task_prctl(option, arg2, arg3, arg4, arg5, &error))
return error;
@@ -1701,9 +1701,7 @@
error = PR_TIMING_STATISTICAL;
break;
case PR_SET_TIMING:
- if (arg2 == PR_TIMING_STATISTICAL)
- error = 0;
- else
+ if (arg2 != PR_TIMING_STATISTICAL)
error = -EINVAL;
break;
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index d7ffdc5..2911665 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -81,6 +81,7 @@
extern int maps_protect;
extern int sysctl_stat_interval;
extern int latencytop_enabled;
+extern int sysctl_nr_open_min, sysctl_nr_open_max;
/* Constants used for minimum and maximum */
#if defined(CONFIG_DETECT_SOFTLOCKUP) || defined(CONFIG_HIGHMEM)
@@ -1190,7 +1191,9 @@
.data = &sysctl_nr_open,
.maxlen = sizeof(int),
.mode = 0644,
- .proc_handler = &proc_dointvec,
+ .proc_handler = &proc_dointvec_minmax,
+ .extra1 = &sysctl_nr_open_min,
+ .extra2 = &sysctl_nr_open_max,
},
{
.ctl_name = FS_DENTRY,
diff --git a/lib/bitmap.c b/lib/bitmap.c
index c4cb48f..482df94 100644
--- a/lib/bitmap.c
+++ b/lib/bitmap.c
@@ -316,22 +316,6 @@
EXPORT_SYMBOL(bitmap_scnprintf);
/**
- * bitmap_scnprintf_len - return buffer length needed to convert
- * bitmap to an ASCII hex string.
- * @len: number of bits to be converted
- */
-int bitmap_scnprintf_len(unsigned int len)
-{
- /* we need 9 chars per word for 32 bit words (8 hexdigits + sep/null) */
- int bitslen = ALIGN(len, CHUNKSZ);
- int wordlen = CHUNKSZ / 4;
- int buflen = (bitslen / wordlen) * (wordlen + 1) * sizeof(char);
-
- return buflen;
-}
-EXPORT_SYMBOL(bitmap_scnprintf_len);
-
-/**
* __bitmap_parse - convert an ASCII hex string into a bitmap.
* @buf: pointer to buffer containing string.
* @buflen: buffer size in bytes. If string is smaller than this
diff --git a/lib/bitrev.c b/lib/bitrev.c
index 989aff7..3956203 100644
--- a/lib/bitrev.c
+++ b/lib/bitrev.c
@@ -42,10 +42,11 @@
};
EXPORT_SYMBOL_GPL(byte_rev_table);
-static __always_inline u16 bitrev16(u16 x)
+u16 bitrev16(u16 x)
{
return (bitrev8(x & 0xff) << 8) | bitrev8(x >> 8);
}
+EXPORT_SYMBOL(bitrev16);
/**
* bitrev32 - reverse the order of bits in a u32 value
diff --git a/lib/div64.c b/lib/div64.c
index bb5bd0c..a111eb8 100644
--- a/lib/div64.c
+++ b/lib/div64.c
@@ -98,3 +98,13 @@
#endif
#endif /* BITS_PER_LONG == 32 */
+
+/*
+ * Iterative div/mod for use when dividend is not expected to be much
+ * bigger than divisor.
+ */
+u32 iter_div_u64_rem(u64 dividend, u32 divisor, u64 *remainder)
+{
+ return __iter_div_u64_rem(dividend, divisor, remainder);
+}
+EXPORT_SYMBOL(iter_div_u64_rem);
diff --git a/lib/hexdump.c b/lib/hexdump.c
index 3435465..f07c0db 100644
--- a/lib/hexdump.c
+++ b/lib/hexdump.c
@@ -12,6 +12,9 @@
#include <linux/kernel.h>
#include <linux/module.h>
+const char hex_asc[] = "0123456789abcdef";
+EXPORT_SYMBOL(hex_asc);
+
/**
* hex_dump_to_buffer - convert a blob of data to "hex ASCII" in memory
* @buf: data blob to dump
@@ -93,8 +96,8 @@
for (j = 0; (j < rowsize) && (j < len) && (lx + 4) < linebuflen;
j++) {
ch = ptr[j];
- linebuf[lx++] = hex_asc(ch >> 4);
- linebuf[lx++] = hex_asc(ch & 0x0f);
+ linebuf[lx++] = hex_asc_hi(ch);
+ linebuf[lx++] = hex_asc_lo(ch);
linebuf[lx++] = ' ';
}
ascii_column = 3 * rowsize + 2;
diff --git a/lib/lmb.c b/lib/lmb.c
index 83287d3..5d7b928 100644
--- a/lib/lmb.c
+++ b/lib/lmb.c
@@ -19,31 +19,43 @@
struct lmb lmb;
+static int lmb_debug;
+
+static int __init early_lmb(char *p)
+{
+ if (p && strstr(p, "debug"))
+ lmb_debug = 1;
+ return 0;
+}
+early_param("lmb", early_lmb);
+
void lmb_dump_all(void)
{
-#ifdef DEBUG
unsigned long i;
- pr_debug("lmb_dump_all:\n");
- pr_debug(" memory.cnt = 0x%lx\n", lmb.memory.cnt);
- pr_debug(" memory.size = 0x%llx\n",
+ if (!lmb_debug)
+ return;
+
+ pr_info("lmb_dump_all:\n");
+ pr_info(" memory.cnt = 0x%lx\n", lmb.memory.cnt);
+ pr_info(" memory.size = 0x%llx\n",
(unsigned long long)lmb.memory.size);
for (i=0; i < lmb.memory.cnt ;i++) {
- pr_debug(" memory.region[0x%x].base = 0x%llx\n",
+ pr_info(" memory.region[0x%lx].base = 0x%llx\n",
i, (unsigned long long)lmb.memory.region[i].base);
- pr_debug(" .size = 0x%llx\n",
+ pr_info(" .size = 0x%llx\n",
(unsigned long long)lmb.memory.region[i].size);
}
- pr_debug(" reserved.cnt = 0x%lx\n", lmb.reserved.cnt);
- pr_debug(" reserved.size = 0x%lx\n", lmb.reserved.size);
+ pr_info(" reserved.cnt = 0x%lx\n", lmb.reserved.cnt);
+ pr_info(" reserved.size = 0x%llx\n",
+ (unsigned long long)lmb.memory.size);
for (i=0; i < lmb.reserved.cnt ;i++) {
- pr_debug(" reserved.region[0x%x].base = 0x%llx\n",
+ pr_info(" reserved.region[0x%lx].base = 0x%llx\n",
i, (unsigned long long)lmb.reserved.region[i].base);
- pr_debug(" .size = 0x%llx\n",
+ pr_info(" .size = 0x%llx\n",
(unsigned long long)lmb.reserved.region[i].size);
}
-#endif /* DEBUG */
}
static unsigned long lmb_addrs_overlap(u64 base1, u64 size1, u64 base2,
@@ -286,8 +298,7 @@
j = lmb_overlaps_region(&lmb.reserved, base, size);
if (j < 0) {
/* this area isn't reserved, take it */
- if (lmb_add_region(&lmb.reserved, base,
- lmb_align_up(size, align)) < 0)
+ if (lmb_add_region(&lmb.reserved, base, size) < 0)
base = ~(u64)0;
return base;
}
@@ -333,6 +344,10 @@
struct lmb_region *mem = &lmb.memory;
int i;
+ BUG_ON(0 == size);
+
+ size = lmb_align_up(size, align);
+
for (i = 0; i < mem->cnt; i++) {
u64 ret = lmb_alloc_nid_region(&mem->region[i],
nid_range,
@@ -370,6 +385,8 @@
BUG_ON(0 == size);
+ size = lmb_align_up(size, align);
+
/* On some platforms, make sure we allocate lowmem */
/* Note that LMB_REAL_LIMIT may be LMB_ALLOC_ANYWHERE */
if (max_addr == LMB_ALLOC_ANYWHERE)
@@ -393,8 +410,7 @@
j = lmb_overlaps_region(&lmb.reserved, base, size);
if (j < 0) {
/* this area isn't reserved, take it */
- if (lmb_add_region(&lmb.reserved, base,
- lmb_align_up(size, align)) < 0)
+ if (lmb_add_region(&lmb.reserved, base, size) < 0)
return 0;
return base;
}
diff --git a/lib/parser.c b/lib/parser.c
index 703c8c1..4f0cbc0 100644
--- a/lib/parser.c
+++ b/lib/parser.c
@@ -182,18 +182,25 @@
}
/**
- * match_strcpy: - copies the characters from a substring_t to a string
- * @to: string to copy characters to.
- * @s: &substring_t to copy
+ * match_strlcpy: - Copy the characters from a substring_t to a sized buffer
+ * @dest: where to copy to
+ * @src: &substring_t to copy
+ * @size: size of destination buffer
*
- * Description: Copies the set of characters represented by the given
- * &substring_t @s to the c-style string @to. Caller guarantees that @to is
- * large enough to hold the characters of @s.
+ * Description: Copy the characters in &substring_t @src to the
+ * c-style string @dest. Copy no more than @size - 1 characters, plus
+ * the terminating NUL. Return length of @src.
*/
-void match_strcpy(char *to, const substring_t *s)
+size_t match_strlcpy(char *dest, const substring_t *src, size_t size)
{
- memcpy(to, s->from, s->to - s->from);
- to[s->to - s->from] = '\0';
+ size_t ret = src->to - src->from;
+
+ if (size) {
+ size_t len = ret >= size ? size - 1 : ret;
+ memcpy(dest, src->from, len);
+ dest[len] = '\0';
+ }
+ return ret;
}
/**
@@ -206,9 +213,10 @@
*/
char *match_strdup(const substring_t *s)
{
- char *p = kmalloc(s->to - s->from + 1, GFP_KERNEL);
+ size_t sz = s->to - s->from + 1;
+ char *p = kmalloc(sz, GFP_KERNEL);
if (p)
- match_strcpy(p, s);
+ match_strlcpy(p, s, sz);
return p;
}
@@ -216,5 +224,5 @@
EXPORT_SYMBOL(match_int);
EXPORT_SYMBOL(match_octal);
EXPORT_SYMBOL(match_hex);
-EXPORT_SYMBOL(match_strcpy);
+EXPORT_SYMBOL(match_strlcpy);
EXPORT_SYMBOL(match_strdup);
diff --git a/lib/radix-tree.c b/lib/radix-tree.c
index bd52171..169a2f8 100644
--- a/lib/radix-tree.c
+++ b/lib/radix-tree.c
@@ -88,6 +88,57 @@
return root->gfp_mask & __GFP_BITS_MASK;
}
+static inline void tag_set(struct radix_tree_node *node, unsigned int tag,
+ int offset)
+{
+ __set_bit(offset, node->tags[tag]);
+}
+
+static inline void tag_clear(struct radix_tree_node *node, unsigned int tag,
+ int offset)
+{
+ __clear_bit(offset, node->tags[tag]);
+}
+
+static inline int tag_get(struct radix_tree_node *node, unsigned int tag,
+ int offset)
+{
+ return test_bit(offset, node->tags[tag]);
+}
+
+static inline void root_tag_set(struct radix_tree_root *root, unsigned int tag)
+{
+ root->gfp_mask |= (__force gfp_t)(1 << (tag + __GFP_BITS_SHIFT));
+}
+
+static inline void root_tag_clear(struct radix_tree_root *root, unsigned int tag)
+{
+ root->gfp_mask &= (__force gfp_t)~(1 << (tag + __GFP_BITS_SHIFT));
+}
+
+static inline void root_tag_clear_all(struct radix_tree_root *root)
+{
+ root->gfp_mask &= __GFP_BITS_MASK;
+}
+
+static inline int root_tag_get(struct radix_tree_root *root, unsigned int tag)
+{
+ return (__force unsigned)root->gfp_mask & (1 << (tag + __GFP_BITS_SHIFT));
+}
+
+/*
+ * Returns 1 if any slot in the node has this tag set.
+ * Otherwise returns 0.
+ */
+static inline int any_tag_set(struct radix_tree_node *node, unsigned int tag)
+{
+ int idx;
+ for (idx = 0; idx < RADIX_TREE_TAG_LONGS; idx++) {
+ if (node->tags[tag][idx])
+ return 1;
+ }
+ return 0;
+}
/*
* This assumes that the caller has performed appropriate preallocation, and
* that the caller has pinned this thread of control to the current CPU.
@@ -124,6 +175,17 @@
{
struct radix_tree_node *node =
container_of(head, struct radix_tree_node, rcu_head);
+
+ /*
+ * must only free zeroed nodes into the slab. radix_tree_shrink
+ * can leave us with a non-NULL entry in the first slot, so clear
+ * that here to make sure.
+ */
+ tag_clear(node, 0, 0);
+ tag_clear(node, 1, 0);
+ node->slots[0] = NULL;
+ node->count = 0;
+
kmem_cache_free(radix_tree_node_cachep, node);
}
@@ -165,59 +227,6 @@
}
EXPORT_SYMBOL(radix_tree_preload);
-static inline void tag_set(struct radix_tree_node *node, unsigned int tag,
- int offset)
-{
- __set_bit(offset, node->tags[tag]);
-}
-
-static inline void tag_clear(struct radix_tree_node *node, unsigned int tag,
- int offset)
-{
- __clear_bit(offset, node->tags[tag]);
-}
-
-static inline int tag_get(struct radix_tree_node *node, unsigned int tag,
- int offset)
-{
- return test_bit(offset, node->tags[tag]);
-}
-
-static inline void root_tag_set(struct radix_tree_root *root, unsigned int tag)
-{
- root->gfp_mask |= (__force gfp_t)(1 << (tag + __GFP_BITS_SHIFT));
-}
-
-
-static inline void root_tag_clear(struct radix_tree_root *root, unsigned int tag)
-{
- root->gfp_mask &= (__force gfp_t)~(1 << (tag + __GFP_BITS_SHIFT));
-}
-
-static inline void root_tag_clear_all(struct radix_tree_root *root)
-{
- root->gfp_mask &= __GFP_BITS_MASK;
-}
-
-static inline int root_tag_get(struct radix_tree_root *root, unsigned int tag)
-{
- return (__force unsigned)root->gfp_mask & (1 << (tag + __GFP_BITS_SHIFT));
-}
-
-/*
- * Returns 1 if any slot in the node has this tag set.
- * Otherwise returns 0.
- */
-static inline int any_tag_set(struct radix_tree_node *node, unsigned int tag)
-{
- int idx;
- for (idx = 0; idx < RADIX_TREE_TAG_LONGS; idx++) {
- if (node->tags[tag][idx])
- return 1;
- }
- return 0;
-}
-
/*
* Return the maximum key which can be store into a
* radix tree with height HEIGHT.
@@ -930,11 +939,6 @@
newptr = radix_tree_ptr_to_indirect(newptr);
root->rnode = newptr;
root->height--;
- /* must only free zeroed nodes into the slab */
- tag_clear(to_free, 0, 0);
- tag_clear(to_free, 1, 0);
- to_free->slots[0] = NULL;
- to_free->count = 0;
radix_tree_node_free(to_free);
}
}
diff --git a/mm/backing-dev.c b/mm/backing-dev.c
index 7c4f9e0..f2e574d 100644
--- a/mm/backing-dev.c
+++ b/mm/backing-dev.c
@@ -172,30 +172,22 @@
int bdi_register(struct backing_dev_info *bdi, struct device *parent,
const char *fmt, ...)
{
- char *name;
va_list args;
int ret = 0;
struct device *dev;
va_start(args, fmt);
- name = kvasprintf(GFP_KERNEL, fmt, args);
+ dev = device_create_vargs(bdi_class, parent, MKDEV(0, 0), bdi, fmt, args);
va_end(args);
-
- if (!name)
- return -ENOMEM;
-
- dev = device_create(bdi_class, parent, MKDEV(0, 0), name);
if (IS_ERR(dev)) {
ret = PTR_ERR(dev);
goto exit;
}
bdi->dev = dev;
- dev_set_drvdata(bdi->dev, bdi);
- bdi_debug_register(bdi, name);
+ bdi_debug_register(bdi, dev_name(dev));
exit:
- kfree(name);
return ret;
}
EXPORT_SYMBOL(bdi_register);
diff --git a/mm/filemap.c b/mm/filemap.c
index 2dead9a..1e6a7d3 100644
--- a/mm/filemap.c
+++ b/mm/filemap.c
@@ -1461,6 +1461,11 @@
*/
ClearPageError(page);
error = mapping->a_ops->readpage(file, page);
+ if (!error) {
+ wait_on_page_locked(page);
+ if (!PageUptodate(page))
+ error = -EIO;
+ }
page_cache_release(page);
if (!error || error == AOP_TRUNCATED_PAGE)
diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index bbf953e..ab17127 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -785,7 +785,7 @@
continue;
spin_lock(&dst->page_table_lock);
- spin_lock(&src->page_table_lock);
+ spin_lock_nested(&src->page_table_lock, SINGLE_DEPTH_NESTING);
if (!huge_pte_none(huge_ptep_get(src_pte))) {
if (cow)
huge_ptep_set_wrprotect(src, addr, src_pte);
diff --git a/mm/memory.c b/mm/memory.c
index 48c122d4..19e0ae9 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -311,6 +311,21 @@
if (!new)
return -ENOMEM;
+ /*
+ * Ensure all pte setup (eg. pte page lock and page clearing) are
+ * visible before the pte is made visible to other CPUs by being
+ * put into page tables.
+ *
+ * The other side of the story is the pointer chasing in the page
+ * table walking code (when walking the page table without locking;
+ * ie. most of the time). Fortunately, these data accesses consist
+ * of a chain of data-dependent loads, meaning most CPUs (alpha
+ * being the notable exception) will already guarantee loads are
+ * seen in-order. See the alpha page table accessors for the
+ * smp_read_barrier_depends() barriers in page table walking code.
+ */
+ smp_wmb(); /* Could be smp_wmb__xxx(before|after)_spin_lock */
+
spin_lock(&mm->page_table_lock);
if (!pmd_present(*pmd)) { /* Has another populated it ? */
mm->nr_ptes++;
@@ -329,6 +344,8 @@
if (!new)
return -ENOMEM;
+ smp_wmb(); /* See comment in __pte_alloc */
+
spin_lock(&init_mm.page_table_lock);
if (!pmd_present(*pmd)) { /* Has another populated it ? */
pmd_populate_kernel(&init_mm, pmd, new);
@@ -2278,8 +2295,6 @@
vmf.flags = flags;
vmf.page = NULL;
- BUG_ON(vma->vm_flags & VM_PFNMAP);
-
ret = vma->vm_ops->fault(vma, &vmf);
if (unlikely(ret & (VM_FAULT_ERROR | VM_FAULT_NOPAGE)))
return ret;
@@ -2619,6 +2634,8 @@
if (!new)
return -ENOMEM;
+ smp_wmb(); /* See comment in __pte_alloc */
+
spin_lock(&mm->page_table_lock);
if (pgd_present(*pgd)) /* Another has populated it */
pud_free(mm, new);
@@ -2640,6 +2657,8 @@
if (!new)
return -ENOMEM;
+ smp_wmb(); /* See comment in __pte_alloc */
+
spin_lock(&mm->page_table_lock);
#ifndef __ARCH_HAS_4LEVEL_HACK
if (pud_present(*pud)) /* Another has populated it */
diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
index b17dca7..833f854 100644
--- a/mm/memory_hotplug.c
+++ b/mm/memory_hotplug.c
@@ -159,21 +159,58 @@
}
#endif /* !CONFIG_SPARSEMEM_VMEMMAP */
+static void grow_zone_span(struct zone *zone, unsigned long start_pfn,
+ unsigned long end_pfn)
+{
+ unsigned long old_zone_end_pfn;
+
+ zone_span_writelock(zone);
+
+ old_zone_end_pfn = zone->zone_start_pfn + zone->spanned_pages;
+ if (start_pfn < zone->zone_start_pfn)
+ zone->zone_start_pfn = start_pfn;
+
+ zone->spanned_pages = max(old_zone_end_pfn, end_pfn) -
+ zone->zone_start_pfn;
+
+ zone_span_writeunlock(zone);
+}
+
+static void grow_pgdat_span(struct pglist_data *pgdat, unsigned long start_pfn,
+ unsigned long end_pfn)
+{
+ unsigned long old_pgdat_end_pfn =
+ pgdat->node_start_pfn + pgdat->node_spanned_pages;
+
+ if (start_pfn < pgdat->node_start_pfn)
+ pgdat->node_start_pfn = start_pfn;
+
+ pgdat->node_spanned_pages = max(old_pgdat_end_pfn, end_pfn) -
+ pgdat->node_start_pfn;
+}
+
static int __add_zone(struct zone *zone, unsigned long phys_start_pfn)
{
struct pglist_data *pgdat = zone->zone_pgdat;
int nr_pages = PAGES_PER_SECTION;
int nid = pgdat->node_id;
int zone_type;
+ unsigned long flags;
zone_type = zone - pgdat->node_zones;
if (!zone->wait_table) {
- int ret = 0;
+ int ret;
+
ret = init_currently_empty_zone(zone, phys_start_pfn,
nr_pages, MEMMAP_HOTPLUG);
- if (ret < 0)
+ if (ret)
return ret;
}
+ pgdat_resize_lock(zone->zone_pgdat, &flags);
+ grow_zone_span(zone, phys_start_pfn, phys_start_pfn + nr_pages);
+ grow_pgdat_span(zone->zone_pgdat, phys_start_pfn,
+ phys_start_pfn + nr_pages);
+ pgdat_resize_unlock(zone->zone_pgdat, &flags);
memmap_init_zone(nr_pages, nid, zone_type,
phys_start_pfn, MEMMAP_HOTPLUG);
return 0;
@@ -299,36 +336,6 @@
}
EXPORT_SYMBOL_GPL(__remove_pages);
-static void grow_zone_span(struct zone *zone,
- unsigned long start_pfn, unsigned long end_pfn)
-{
- unsigned long old_zone_end_pfn;
-
- zone_span_writelock(zone);
-
- old_zone_end_pfn = zone->zone_start_pfn + zone->spanned_pages;
- if (start_pfn < zone->zone_start_pfn)
- zone->zone_start_pfn = start_pfn;
-
- zone->spanned_pages = max(old_zone_end_pfn, end_pfn) -
- zone->zone_start_pfn;
-
- zone_span_writeunlock(zone);
-}
-
-static void grow_pgdat_span(struct pglist_data *pgdat,
- unsigned long start_pfn, unsigned long end_pfn)
-{
- unsigned long old_pgdat_end_pfn =
- pgdat->node_start_pfn + pgdat->node_spanned_pages;
-
- if (start_pfn < pgdat->node_start_pfn)
- pgdat->node_start_pfn = start_pfn;
-
- pgdat->node_spanned_pages = max(old_pgdat_end_pfn, end_pfn) -
- pgdat->node_start_pfn;
-}
-
void online_page(struct page *page)
{
totalram_pages++;
@@ -367,7 +374,6 @@
int online_pages(unsigned long pfn, unsigned long nr_pages)
{
- unsigned long flags;
unsigned long onlined_pages = 0;
struct zone *zone;
int need_zonelists_rebuild = 0;
@@ -395,11 +401,6 @@
* memory_block->state_mutex.
*/
zone = page_zone(pfn_to_page(pfn));
- pgdat_resize_lock(zone->zone_pgdat, &flags);
- grow_zone_span(zone, pfn, pfn + nr_pages);
- grow_pgdat_span(zone->zone_pgdat, pfn, pfn + nr_pages);
- pgdat_resize_unlock(zone->zone_pgdat, &flags);
-
/*
* If this zone is not populated, then it is not in zonelist.
* This means the page allocator ignores this zone.
@@ -408,8 +409,15 @@
if (!populated_zone(zone))
need_zonelists_rebuild = 1;
- walk_memory_resource(pfn, nr_pages, &onlined_pages,
+ ret = walk_memory_resource(pfn, nr_pages, &onlined_pages,
online_pages_range);
+ if (ret) {
+ printk(KERN_DEBUG "online_pages %lx at %lx failed\n",
+ nr_pages, pfn);
+ memory_notify(MEM_CANCEL_ONLINE, &arg);
+ return ret;
+ }
+
zone->present_pages += onlined_pages;
zone->zone_pgdat->node_present_pages += onlined_pages;
diff --git a/mm/mmap.c b/mm/mmap.c
index fac6633..3354fdd 100644
--- a/mm/mmap.c
+++ b/mm/mmap.c
@@ -80,7 +80,7 @@
int sysctl_overcommit_memory = OVERCOMMIT_GUESS; /* heuristic overcommit */
int sysctl_overcommit_ratio = 50; /* default is 50% */
int sysctl_max_map_count __read_mostly = DEFAULT_MAX_MAP_COUNT;
-atomic_t vm_committed_space = ATOMIC_INIT(0);
+atomic_long_t vm_committed_space = ATOMIC_LONG_INIT(0);
/*
* Check that a process has enough memory to allocate a new virtual
@@ -177,7 +177,7 @@
* cast `allowed' as a signed long because vm_committed_space
* sometimes has a negative value
*/
- if (atomic_read(&vm_committed_space) < (long)allowed)
+ if (atomic_long_read(&vm_committed_space) < (long)allowed)
return 0;
error:
vm_unacct_memory(pages);
@@ -245,10 +245,16 @@
unsigned long rlim, retval;
unsigned long newbrk, oldbrk;
struct mm_struct *mm = current->mm;
+ unsigned long min_brk;
down_write(&mm->mmap_sem);
- if (brk < mm->start_brk)
+#ifdef CONFIG_COMPAT_BRK
+ min_brk = mm->end_code;
+#else
+ min_brk = mm->start_brk;
+#endif
+ if (brk < min_brk)
goto out;
/*
diff --git a/mm/mprotect.c b/mm/mprotect.c
index 4de5468..a5bf31c 100644
--- a/mm/mprotect.c
+++ b/mm/mprotect.c
@@ -26,6 +26,13 @@
#include <asm/cacheflush.h>
#include <asm/tlbflush.h>
+#ifndef pgprot_modify
+static inline pgprot_t pgprot_modify(pgprot_t oldprot, pgprot_t newprot)
+{
+ return newprot;
+}
+#endif
+
static void change_pte_range(struct mm_struct *mm, pmd_t *pmd,
unsigned long addr, unsigned long end, pgprot_t newprot,
int dirty_accountable)
@@ -192,7 +199,9 @@
* held in write mode.
*/
vma->vm_flags = newflags;
- vma->vm_page_prot = vm_get_page_prot(newflags);
+ vma->vm_page_prot = pgprot_modify(vma->vm_page_prot,
+ vm_get_page_prot(newflags));
+
if (vma_wants_writenotify(vma)) {
vma->vm_page_prot = vm_get_page_prot(newflags & ~VM_SHARED);
dirty_accountable = 1;
diff --git a/mm/nommu.c b/mm/nommu.c
index ef8c62c..4462b6a 100644
--- a/mm/nommu.c
+++ b/mm/nommu.c
@@ -39,7 +39,7 @@
unsigned long max_mapnr;
unsigned long num_physpages;
unsigned long askedalloc, realalloc;
-atomic_t vm_committed_space = ATOMIC_INIT(0);
+atomic_long_t vm_committed_space = ATOMIC_LONG_INIT(0);
int sysctl_overcommit_memory = OVERCOMMIT_GUESS; /* heuristic overcommit */
int sysctl_overcommit_ratio = 50; /* default is 50% */
int sysctl_max_map_count = DEFAULT_MAX_MAP_COUNT;
@@ -109,16 +109,23 @@
* If the object we have should not have ksize performed on it,
* return size of 0
*/
- if (!objp || (unsigned long)objp >= memory_end || !((page = virt_to_page(objp))))
+ if (!objp || !virt_addr_valid(objp))
return 0;
+ page = virt_to_head_page(objp);
+
+ /*
+ * If the allocator sets PageSlab, we know the pointer came from
+ * kmalloc().
+ */
if (PageSlab(page))
return ksize(objp);
- BUG_ON(page->index < 0);
- BUG_ON(page->index >= MAX_ORDER);
-
- return (PAGE_SIZE << page->index);
+ /*
+ * The ksize() function is only guaranteed to work for pointers
+ * returned by kmalloc(). So handle arbitrary pointers here.
+ */
+ return PAGE_SIZE << compound_order(page);
}
/*
@@ -1410,7 +1417,7 @@
* cast `allowed' as a signed long because vm_committed_space
* sometimes has a negative value
*/
- if (atomic_read(&vm_committed_space) < (long)allowed)
+ if (atomic_long_read(&vm_committed_space) < (long)allowed)
return 0;
error:
vm_unacct_memory(pages);
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index bdd5c43..2f55295 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -237,16 +237,7 @@
printk(KERN_EMERG "Trying to fix it up, but a reboot is needed\n"
KERN_EMERG "Backtrace:\n");
dump_stack();
- page->flags &= ~(1 << PG_lru |
- 1 << PG_private |
- 1 << PG_locked |
- 1 << PG_active |
- 1 << PG_dirty |
- 1 << PG_reclaim |
- 1 << PG_slab |
- 1 << PG_swapcache |
- 1 << PG_writeback |
- 1 << PG_buddy );
+ page->flags &= ~PAGE_FLAGS_CLEAR_WHEN_BAD;
set_page_count(page, 0);
reset_page_mapcount(page);
page->mapping = NULL;
@@ -463,16 +454,7 @@
(page->mapping != NULL) |
(page_get_page_cgroup(page) != NULL) |
(page_count(page) != 0) |
- (page->flags & (
- 1 << PG_lru |
- 1 << PG_private |
- 1 << PG_locked |
- 1 << PG_active |
- 1 << PG_slab |
- 1 << PG_swapcache |
- 1 << PG_writeback |
- 1 << PG_reserved |
- 1 << PG_buddy ))))
+ (page->flags & PAGE_FLAGS_CHECK_AT_FREE)))
bad_page(page);
if (PageDirty(page))
__ClearPageDirty(page);
@@ -616,17 +598,7 @@
(page->mapping != NULL) |
(page_get_page_cgroup(page) != NULL) |
(page_count(page) != 0) |
- (page->flags & (
- 1 << PG_lru |
- 1 << PG_private |
- 1 << PG_locked |
- 1 << PG_active |
- 1 << PG_dirty |
- 1 << PG_slab |
- 1 << PG_swapcache |
- 1 << PG_writeback |
- 1 << PG_reserved |
- 1 << PG_buddy ))))
+ (page->flags & PAGE_FLAGS_CHECK_AT_PREP)))
bad_page(page);
/*
@@ -1396,6 +1368,9 @@
(void)first_zones_zonelist(zonelist, high_zoneidx, nodemask,
&preferred_zone);
+ if (!preferred_zone)
+ return NULL;
+
classzone_idx = zone_idx(preferred_zone);
zonelist_scan:
@@ -2804,7 +2779,7 @@
alloc_size = zone->wait_table_hash_nr_entries
* sizeof(wait_queue_head_t);
- if (system_state == SYSTEM_BOOTING) {
+ if (!slab_is_available()) {
zone->wait_table = (wait_queue_head_t *)
alloc_bootmem_node(pgdat, alloc_size);
} else {
@@ -2862,8 +2837,6 @@
zone->zone_start_pfn = zone_start_pfn;
- memmap_init(size, pgdat->node_id, zone_idx(zone), zone_start_pfn);
-
zone_init_free_lists(zone);
return 0;
@@ -3380,7 +3353,8 @@
* is used by this zone for memmap. This affects the watermark
* and per-cpu initialisations
*/
- memmap_pages = (size * sizeof(struct page)) >> PAGE_SHIFT;
+ memmap_pages =
+ PAGE_ALIGN(size * sizeof(struct page)) >> PAGE_SHIFT;
if (realsize >= memmap_pages) {
realsize -= memmap_pages;
printk(KERN_DEBUG
@@ -3433,6 +3407,7 @@
ret = init_currently_empty_zone(zone, zone_start_pfn,
size, MEMMAP_EARLY);
BUG_ON(ret);
+ memmap_init(size, nid, j, zone_start_pfn);
zone_start_pfn += size;
}
}
diff --git a/mm/pagewalk.c b/mm/pagewalk.c
index 0afd238..d5878be 100644
--- a/mm/pagewalk.c
+++ b/mm/pagewalk.c
@@ -3,14 +3,14 @@
#include <linux/sched.h>
static int walk_pte_range(pmd_t *pmd, unsigned long addr, unsigned long end,
- const struct mm_walk *walk, void *private)
+ struct mm_walk *walk)
{
pte_t *pte;
int err = 0;
pte = pte_offset_map(pmd, addr);
for (;;) {
- err = walk->pte_entry(pte, addr, addr + PAGE_SIZE, private);
+ err = walk->pte_entry(pte, addr, addr + PAGE_SIZE, walk);
if (err)
break;
addr += PAGE_SIZE;
@@ -24,7 +24,7 @@
}
static int walk_pmd_range(pud_t *pud, unsigned long addr, unsigned long end,
- const struct mm_walk *walk, void *private)
+ struct mm_walk *walk)
{
pmd_t *pmd;
unsigned long next;
@@ -35,15 +35,15 @@
next = pmd_addr_end(addr, end);
if (pmd_none_or_clear_bad(pmd)) {
if (walk->pte_hole)
- err = walk->pte_hole(addr, next, private);
+ err = walk->pte_hole(addr, next, walk);
if (err)
break;
continue;
}
if (walk->pmd_entry)
- err = walk->pmd_entry(pmd, addr, next, private);
+ err = walk->pmd_entry(pmd, addr, next, walk);
if (!err && walk->pte_entry)
- err = walk_pte_range(pmd, addr, next, walk, private);
+ err = walk_pte_range(pmd, addr, next, walk);
if (err)
break;
} while (pmd++, addr = next, addr != end);
@@ -52,7 +52,7 @@
}
static int walk_pud_range(pgd_t *pgd, unsigned long addr, unsigned long end,
- const struct mm_walk *walk, void *private)
+ struct mm_walk *walk)
{
pud_t *pud;
unsigned long next;
@@ -63,15 +63,15 @@
next = pud_addr_end(addr, end);
if (pud_none_or_clear_bad(pud)) {
if (walk->pte_hole)
- err = walk->pte_hole(addr, next, private);
+ err = walk->pte_hole(addr, next, walk);
if (err)
break;
continue;
}
if (walk->pud_entry)
- err = walk->pud_entry(pud, addr, next, private);
+ err = walk->pud_entry(pud, addr, next, walk);
if (!err && (walk->pmd_entry || walk->pte_entry))
- err = walk_pmd_range(pud, addr, next, walk, private);
+ err = walk_pmd_range(pud, addr, next, walk);
if (err)
break;
} while (pud++, addr = next, addr != end);
@@ -85,15 +85,15 @@
* @addr: starting address
* @end: ending address
* @walk: set of callbacks to invoke for each level of the tree
- * @private: private data passed to the callback function
*
* Recursively walk the page table for the memory area in a VMA,
* calling supplied callbacks. Callbacks are called in-order (first
* PGD, first PUD, first PMD, first PTE, second PTE... second PMD,
* etc.). If lower-level callbacks are omitted, walking depth is reduced.
*
- * Each callback receives an entry pointer, the start and end of the
- * associated range, and a caller-supplied private data pointer.
+ * Each callback receives an entry pointer and the start and end of the
+ * associated range, and a copy of the original mm_walk for access to
+ * the ->private or ->mm fields.
*
* No locks are taken, but the bottom level iterator will map PTE
* directories from highmem if necessary.
@@ -101,9 +101,8 @@
* If any callback returns a non-zero value, the walk is aborted and
* the return value is propagated back to the caller. Otherwise 0 is returned.
*/
-int walk_page_range(const struct mm_struct *mm,
- unsigned long addr, unsigned long end,
- const struct mm_walk *walk, void *private)
+int walk_page_range(unsigned long addr, unsigned long end,
+ struct mm_walk *walk)
{
pgd_t *pgd;
unsigned long next;
@@ -112,21 +111,24 @@
if (addr >= end)
return err;
- pgd = pgd_offset(mm, addr);
+ if (!walk->mm)
+ return -EINVAL;
+
+ pgd = pgd_offset(walk->mm, addr);
do {
next = pgd_addr_end(addr, end);
if (pgd_none_or_clear_bad(pgd)) {
if (walk->pte_hole)
- err = walk->pte_hole(addr, next, private);
+ err = walk->pte_hole(addr, next, walk);
if (err)
break;
continue;
}
if (walk->pgd_entry)
- err = walk->pgd_entry(pgd, addr, next, private);
+ err = walk->pgd_entry(pgd, addr, next, walk);
if (!err &&
(walk->pud_entry || walk->pmd_entry || walk->pte_entry))
- err = walk_pud_range(pgd, addr, next, walk, private);
+ err = walk_pud_range(pgd, addr, next, walk);
if (err)
break;
} while (pgd++, addr = next, addr != end);
diff --git a/mm/pdflush.c b/mm/pdflush.c
index 1c96cfc..9d834aa 100644
--- a/mm/pdflush.c
+++ b/mm/pdflush.c
@@ -207,7 +207,6 @@
spin_lock_irqsave(&pdflush_lock, flags);
if (list_empty(&pdflush_list)) {
- spin_unlock_irqrestore(&pdflush_lock, flags);
ret = -1;
} else {
struct pdflush_work *pdf;
@@ -219,8 +218,9 @@
pdf->fn = fn;
pdf->arg0 = arg0;
wake_up_process(pdf->who);
- spin_unlock_irqrestore(&pdflush_lock, flags);
}
+ spin_unlock_irqrestore(&pdflush_lock, flags);
+
return ret;
}
diff --git a/mm/slob.c b/mm/slob.c
index 6038cba..a3ad667 100644
--- a/mm/slob.c
+++ b/mm/slob.c
@@ -469,8 +469,9 @@
return ZERO_SIZE_PTR;
m = slob_alloc(size + align, gfp, align, node);
- if (m)
- *m = size;
+ if (!m)
+ return NULL;
+ *m = size;
return (void *)m + align;
} else {
void *ret;
diff --git a/mm/slub.c b/mm/slub.c
index a505a82..0987d1c 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -2726,9 +2726,10 @@
page = virt_to_head_page(object);
- if (unlikely(!PageSlab(page)))
+ if (unlikely(!PageSlab(page))) {
+ WARN_ON(!PageCompound(page));
return PAGE_SIZE << compound_order(page);
-
+ }
s = page->slab;
#ifdef CONFIG_SLUB_DEBUG
diff --git a/mm/swap.c b/mm/swap.c
index 91e1944..45c9f25 100644
--- a/mm/swap.c
+++ b/mm/swap.c
@@ -503,7 +503,7 @@
local = &__get_cpu_var(committed_space);
*local += pages;
if (*local > ACCT_THRESHOLD || *local < -ACCT_THRESHOLD) {
- atomic_add(*local, &vm_committed_space);
+ atomic_long_add(*local, &vm_committed_space);
*local = 0;
}
preempt_enable();
@@ -520,7 +520,7 @@
committed = &per_cpu(committed_space, (long)hcpu);
if (action == CPU_DEAD || action == CPU_DEAD_FROZEN) {
- atomic_add(*committed, &vm_committed_space);
+ atomic_long_add(*committed, &vm_committed_space);
*committed = 0;
drain_cpu_pagevecs((long)hcpu);
}
diff --git a/mm/vmscan.c b/mm/vmscan.c
index 9a29901..967d30c 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -1307,7 +1307,7 @@
struct scan_control *sc)
{
int priority;
- int ret = 0;
+ unsigned long ret = 0;
unsigned long total_scanned = 0;
unsigned long nr_reclaimed = 0;
struct reclaim_state *reclaim_state = current->reclaim_state;
diff --git a/mm/vmstat.c b/mm/vmstat.c
index 1a32130..db9eabb 100644
--- a/mm/vmstat.c
+++ b/mm/vmstat.c
@@ -41,7 +41,9 @@
*/
void all_vm_events(unsigned long *ret)
{
+ get_online_cpus();
sum_vm_events(ret, &cpu_online_map);
+ put_online_cpus();
}
EXPORT_SYMBOL_GPL(all_vm_events);
diff --git a/net/8021q/vlan.c b/net/8021q/vlan.c
index 2a739ad..ab2225d 100644
--- a/net/8021q/vlan.c
+++ b/net/8021q/vlan.c
@@ -382,6 +382,18 @@
memcpy(vlan->real_dev_addr, dev->dev_addr, ETH_ALEN);
}
+static void vlan_transfer_features(struct net_device *dev,
+ struct net_device *vlandev)
+{
+ unsigned long old_features = vlandev->features;
+
+ vlandev->features &= ~dev->vlan_features;
+ vlandev->features |= dev->features & dev->vlan_features;
+
+ if (old_features != vlandev->features)
+ netdev_features_change(vlandev);
+}
+
static void __vlan_device_event(struct net_device *dev, unsigned long event)
{
switch (event) {
@@ -410,10 +422,8 @@
int i, flgs;
struct net_device *vlandev;
- if (is_vlan_dev(dev)) {
+ if (is_vlan_dev(dev))
__vlan_device_event(dev, event);
- goto out;
- }
grp = __vlan_find_group(dev);
if (!grp)
@@ -450,6 +460,18 @@
}
break;
+ case NETDEV_FEAT_CHANGE:
+ /* Propagate device features to underlying device */
+ for (i = 0; i < VLAN_GROUP_ARRAY_LEN; i++) {
+ vlandev = vlan_group_get_device(grp, i);
+ if (!vlandev)
+ continue;
+
+ vlan_transfer_features(dev, vlandev);
+ }
+
+ break;
+
case NETDEV_DOWN:
/* Put all VLANs for this dev in the down state too. */
for (i = 0; i < VLAN_GROUP_ARRAY_LEN; i++) {
diff --git a/net/8021q/vlan_dev.c b/net/8021q/vlan_dev.c
index c961f08..5d055c2 100644
--- a/net/8021q/vlan_dev.c
+++ b/net/8021q/vlan_dev.c
@@ -663,6 +663,8 @@
(1<<__LINK_STATE_DORMANT))) |
(1<<__LINK_STATE_PRESENT);
+ dev->features |= real_dev->features & real_dev->vlan_features;
+
/* ipv6 shared card related stuff */
dev->dev_id = real_dev->dev_id;
diff --git a/net/9p/Kconfig b/net/9p/Kconfig
index bafc50c..ff34c5a 100644
--- a/net/9p/Kconfig
+++ b/net/9p/Kconfig
@@ -13,16 +13,6 @@
If unsure, say N.
-config NET_9P_FD
- depends on NET_9P
- default y if NET_9P
- tristate "9P File Descriptor Transports (Experimental)"
- help
- This builds support for file descriptor transports for 9p
- which includes support for TCP/IP, named pipes, or passed
- file descriptors. TCP/IP is the default transport for 9p,
- so if you are going to use 9p, you'll likely want this.
-
config NET_9P_VIRTIO
depends on NET_9P && EXPERIMENTAL && VIRTIO
tristate "9P Virtio Transport (Experimental)"
diff --git a/net/9p/Makefile b/net/9p/Makefile
index 8a10511..5192194 100644
--- a/net/9p/Makefile
+++ b/net/9p/Makefile
@@ -1,5 +1,4 @@
obj-$(CONFIG_NET_9P) := 9pnet.o
-obj-$(CONFIG_NET_9P_FD) += 9pnet_fd.o
obj-$(CONFIG_NET_9P_VIRTIO) += 9pnet_virtio.o
9pnet-objs := \
@@ -9,8 +8,6 @@
error.o \
fcprint.o \
util.o \
-
-9pnet_fd-objs := \
trans_fd.o \
9pnet_virtio-objs := \
diff --git a/net/9p/client.c b/net/9p/client.c
index 84e087e..2ffe40c 100644
--- a/net/9p/client.c
+++ b/net/9p/client.c
@@ -64,21 +64,30 @@
* @options: options string passed from mount
* @v9ses: existing v9fs session information
*
+ * Return 0 upon success, -ERRNO upon failure
*/
-static void parse_opts(char *options, struct p9_client *clnt)
+static int parse_opts(char *opts, struct p9_client *clnt)
{
+ char *options;
char *p;
substring_t args[MAX_OPT_ARGS];
int option;
- int ret;
+ int ret = 0;
clnt->trans_mod = v9fs_default_trans();
clnt->dotu = 1;
clnt->msize = 8192;
- if (!options)
- return;
+ if (!opts)
+ return 0;
+
+ options = kstrdup(opts, GFP_KERNEL);
+ if (!options) {
+ P9_DPRINTK(P9_DEBUG_ERROR,
+ "failed to allocate copy of option string\n");
+ return -ENOMEM;
+ }
while ((p = strsep(&options, ",")) != NULL) {
int token;
@@ -86,10 +95,11 @@
continue;
token = match_token(p, tokens, args);
if (token < Opt_trans) {
- ret = match_int(&args[0], &option);
- if (ret < 0) {
+ int r = match_int(&args[0], &option);
+ if (r < 0) {
P9_DPRINTK(P9_DEBUG_ERROR,
"integer field, but no integer?\n");
+ ret = r;
continue;
}
}
@@ -107,6 +117,8 @@
continue;
}
}
+ kfree(options);
+ return ret;
}
@@ -138,16 +150,20 @@
if (!clnt)
return ERR_PTR(-ENOMEM);
+ clnt->trans = NULL;
spin_lock_init(&clnt->lock);
INIT_LIST_HEAD(&clnt->fidlist);
clnt->fidpool = p9_idpool_create();
- if (!clnt->fidpool) {
+ if (IS_ERR(clnt->fidpool)) {
err = PTR_ERR(clnt->fidpool);
clnt->fidpool = NULL;
goto error;
}
- parse_opts(options, clnt);
+ err = parse_opts(options, clnt);
+ if (err < 0)
+ goto error;
+
if (clnt->trans_mod == NULL) {
err = -EPROTONOSUPPORT;
P9_DPRINTK(P9_DEBUG_ERROR,
diff --git a/net/9p/conv.c b/net/9p/conv.c
index 3fe35d5..4454720 100644
--- a/net/9p/conv.c
+++ b/net/9p/conv.c
@@ -197,7 +197,7 @@
/**
* p9_size_wstat - calculate the size of a variable length stat struct
- * @stat: metadata (stat) structure
+ * @wstat: metadata (stat) structure
* @dotu: non-zero if 9P2000.u
*
*/
@@ -511,6 +511,12 @@
return fc;
}
+/**
+ * p9_set_tag - set the tag field of an &p9_fcall structure
+ * @fc: fcall structure to set tag within
+ * @tag: tag id to set
+ */
+
void p9_set_tag(struct p9_fcall *fc, u16 tag)
{
fc->tag = tag;
@@ -518,6 +524,12 @@
}
EXPORT_SYMBOL(p9_set_tag);
+/**
+ * p9_create_tversion - allocates and creates a T_VERSION request
+ * @msize: requested maximum data size
+ * @version: version string to negotiate
+ *
+ */
struct p9_fcall *p9_create_tversion(u32 msize, char *version)
{
int size;
@@ -542,6 +554,16 @@
}
EXPORT_SYMBOL(p9_create_tversion);
+/**
+ * p9_create_tauth - allocates and creates a T_AUTH request
+ * @afid: handle to use for authentication protocol
+ * @uname: user name attempting to authenticate
+ * @aname: mount specifier for remote server
+ * @n_uname: numeric id for user attempting to authneticate
+ * @dotu: 9P2000.u extension flag
+ *
+ */
+
struct p9_fcall *p9_create_tauth(u32 afid, char *uname, char *aname,
u32 n_uname, int dotu)
{
@@ -580,6 +602,18 @@
}
EXPORT_SYMBOL(p9_create_tauth);
+/**
+ * p9_create_tattach - allocates and creates a T_ATTACH request
+ * @fid: handle to use for the new mount point
+ * @afid: handle to use for authentication protocol
+ * @uname: user name attempting to attach
+ * @aname: mount specifier for remote server
+ * @n_uname: numeric id for user attempting to attach
+ * @n_uname: numeric id for user attempting to attach
+ * @dotu: 9P2000.u extension flag
+ *
+ */
+
struct p9_fcall *
p9_create_tattach(u32 fid, u32 afid, char *uname, char *aname,
u32 n_uname, int dotu)
@@ -616,6 +650,12 @@
}
EXPORT_SYMBOL(p9_create_tattach);
+/**
+ * p9_create_tflush - allocates and creates a T_FLUSH request
+ * @oldtag: tag id for the transaction we are attempting to cancel
+ *
+ */
+
struct p9_fcall *p9_create_tflush(u16 oldtag)
{
int size;
@@ -639,6 +679,15 @@
}
EXPORT_SYMBOL(p9_create_tflush);
+/**
+ * p9_create_twalk - allocates and creates a T_FLUSH request
+ * @fid: handle we are traversing from
+ * @newfid: a new handle for this transaction
+ * @nwname: number of path elements to traverse
+ * @wnames: array of path elements
+ *
+ */
+
struct p9_fcall *p9_create_twalk(u32 fid, u32 newfid, u16 nwname,
char **wnames)
{
@@ -677,6 +726,13 @@
}
EXPORT_SYMBOL(p9_create_twalk);
+/**
+ * p9_create_topen - allocates and creates a T_OPEN request
+ * @fid: handle we are trying to open
+ * @mode: what mode we are trying to open the file in
+ *
+ */
+
struct p9_fcall *p9_create_topen(u32 fid, u8 mode)
{
int size;
@@ -701,6 +757,19 @@
}
EXPORT_SYMBOL(p9_create_topen);
+/**
+ * p9_create_tcreate - allocates and creates a T_CREATE request
+ * @fid: handle of directory we are trying to create in
+ * @name: name of the file we are trying to create
+ * @perm: permissions for the file we are trying to create
+ * @mode: what mode we are trying to open the file in
+ * @extension: 9p2000.u extension string (for special files)
+ * @dotu: 9p2000.u enabled flag
+ *
+ * Note: Plan 9 create semantics include opening the resulting file
+ * which is why mode is included.
+ */
+
struct p9_fcall *p9_create_tcreate(u32 fid, char *name, u32 perm, u8 mode,
char *extension, int dotu)
{
@@ -736,6 +805,13 @@
}
EXPORT_SYMBOL(p9_create_tcreate);
+/**
+ * p9_create_tread - allocates and creates a T_READ request
+ * @fid: handle of the file we are trying to read
+ * @offset: offset to start reading from
+ * @count: how many bytes to read
+ */
+
struct p9_fcall *p9_create_tread(u32 fid, u64 offset, u32 count)
{
int size;
@@ -761,6 +837,17 @@
}
EXPORT_SYMBOL(p9_create_tread);
+/**
+ * p9_create_twrite - allocates and creates a T_WRITE request from the kernel
+ * @fid: handle of the file we are trying to write
+ * @offset: offset to start writing at
+ * @count: how many bytes to write
+ * @data: data to write
+ *
+ * This function will create a requst with data buffers from the kernel
+ * such as the page cache.
+ */
+
struct p9_fcall *p9_create_twrite(u32 fid, u64 offset, u32 count,
const char *data)
{
@@ -794,6 +881,16 @@
}
EXPORT_SYMBOL(p9_create_twrite);
+/**
+ * p9_create_twrite_u - allocates and creates a T_WRITE request from userspace
+ * @fid: handle of the file we are trying to write
+ * @offset: offset to start writing at
+ * @count: how many bytes to write
+ * @data: data to write
+ *
+ * This function will create a request with data buffers from userspace
+ */
+
struct p9_fcall *p9_create_twrite_u(u32 fid, u64 offset, u32 count,
const char __user *data)
{
@@ -827,6 +924,14 @@
}
EXPORT_SYMBOL(p9_create_twrite_u);
+/**
+ * p9_create_tclunk - allocate a request to forget about a file handle
+ * @fid: handle of the file we closing or forgetting about
+ *
+ * clunk is used both to close open files and to discard transient handles
+ * which may be created during meta-data operations and hierarchy traversal.
+ */
+
struct p9_fcall *p9_create_tclunk(u32 fid)
{
int size;
@@ -850,6 +955,12 @@
}
EXPORT_SYMBOL(p9_create_tclunk);
+/**
+ * p9_create_tremove - allocate and create a request to remove a file
+ * @fid: handle of the file or directory we are removing
+ *
+ */
+
struct p9_fcall *p9_create_tremove(u32 fid)
{
int size;
@@ -873,6 +984,12 @@
}
EXPORT_SYMBOL(p9_create_tremove);
+/**
+ * p9_create_tstat - allocate and populate a request for attributes
+ * @fid: handle of the file or directory we are trying to get the attributes of
+ *
+ */
+
struct p9_fcall *p9_create_tstat(u32 fid)
{
int size;
@@ -896,6 +1013,14 @@
}
EXPORT_SYMBOL(p9_create_tstat);
+/**
+ * p9_create_tstat - allocate and populate a request to change attributes
+ * @fid: handle of the file or directory we are trying to change
+ * @wstat: &p9_stat structure with attributes we wish to set
+ * @dotu: 9p2000.u enabled flag
+ *
+ */
+
struct p9_fcall *p9_create_twstat(u32 fid, struct p9_wstat *wstat,
int dotu)
{
@@ -922,3 +1047,4 @@
return fc;
}
EXPORT_SYMBOL(p9_create_twstat);
+
diff --git a/net/9p/error.c b/net/9p/error.c
index 64104b9..fdebe43 100644
--- a/net/9p/error.c
+++ b/net/9p/error.c
@@ -33,6 +33,13 @@
#include <linux/errno.h>
#include <net/9p/9p.h>
+/**
+ * struct errormap - map string errors from Plan 9 to Linux numeric ids
+ * @name: string sent over 9P
+ * @val: numeric id most closely representing @name
+ * @namelen: length of string
+ * @list: hash-table list for string lookup
+ */
struct errormap {
char *name;
int val;
@@ -177,8 +184,7 @@
};
/**
- * p9_error_init - preload
- * @errstr: error string
+ * p9_error_init - preload mappings into hash list
*
*/
@@ -206,6 +212,7 @@
/**
* errstr2errno - convert error string to error number
* @errstr: error string
+ * @len: length of error string
*
*/
@@ -230,8 +237,8 @@
if (errno == 0) {
/* TODO: if error isn't found, add it dynamically */
errstr[len] = 0;
- printk(KERN_ERR "%s: errstr :%s: not found\n", __func__,
- errstr);
+ printk(KERN_ERR "%s: server reported unknown error %s\n",
+ __func__, errstr);
errno = 1;
}
diff --git a/net/9p/fcprint.c b/net/9p/fcprint.c
index 40244fb..53dd8e2 100644
--- a/net/9p/fcprint.c
+++ b/net/9p/fcprint.c
@@ -142,6 +142,14 @@
return p9_dumpdata(buf, buflen, data, datalen < 16?datalen:16);
}
+/**
+ * p9_printfcall - decode and print a protocol structure into a buffer
+ * @buf: buffer to deposit decoded structure into
+ * @buflen: available space in buffer
+ * @fc: protocol rpc structure of type &p9_fcall
+ * @extended: whether or not session is operating with extended protocol
+ */
+
int
p9_printfcall(char *buf, int buflen, struct p9_fcall *fc, int extended)
{
diff --git a/net/9p/mod.c b/net/9p/mod.c
index c285aab..bdee1fb 100644
--- a/net/9p/mod.c
+++ b/net/9p/mod.c
@@ -39,9 +39,6 @@
MODULE_PARM_DESC(debug, "9P debugging level");
#endif
-extern int p9_mux_global_init(void);
-extern void p9_mux_global_exit(void);
-
/*
* Dynamic Transport Registration Routines
*
@@ -52,7 +49,7 @@
/**
* v9fs_register_trans - register a new transport with 9p
- * @m - structure describing the transport module and entry points
+ * @m: structure describing the transport module and entry points
*
*/
void v9fs_register_trans(struct p9_trans_module *m)
@@ -65,7 +62,7 @@
/**
* v9fs_match_trans - match transport versus registered transports
- * @arg: string identifying transport
+ * @name: string identifying transport
*
*/
struct p9_trans_module *v9fs_match_trans(const substring_t *name)
@@ -110,6 +107,7 @@
p9_error_init();
printk(KERN_INFO "Installing 9P2000 support\n");
+ p9_trans_fd_init();
return ret;
}
diff --git a/net/9p/trans_fd.c b/net/9p/trans_fd.c
index f624dff..4507f74 100644
--- a/net/9p/trans_fd.c
+++ b/net/9p/trans_fd.c
@@ -47,12 +47,29 @@
#define SCHED_TIMEOUT 10
#define MAXPOLLWADDR 2
+/**
+ * struct p9_fd_opts - per-transport options
+ * @rfd: file descriptor for reading (trans=fd)
+ * @wfd: file descriptor for writing (trans=fd)
+ * @port: port to connect to (trans=tcp)
+ *
+ */
+
struct p9_fd_opts {
int rfd;
int wfd;
u16 port;
};
+
+/**
+ * struct p9_trans_fd - transport state
+ * @rd: reference to file to read from
+ * @wr: reference of file to write to
+ * @conn: connection state reference
+ *
+ */
+
struct p9_trans_fd {
struct file *rd;
struct file *wr;
@@ -90,10 +107,24 @@
};
struct p9_req;
-
typedef void (*p9_conn_req_callback)(struct p9_req *req, void *a);
+
+/**
+ * struct p9_req - fd mux encoding of an rpc transaction
+ * @lock: protects req_list
+ * @tag: numeric tag for rpc transaction
+ * @tcall: request &p9_fcall structure
+ * @rcall: response &p9_fcall structure
+ * @err: error state
+ * @cb: callback for when response is received
+ * @cba: argument to pass to callback
+ * @flush: flag to indicate RPC has been flushed
+ * @req_list: list link for higher level objects to chain requests
+ *
+ */
+
struct p9_req {
- spinlock_t lock; /* protect request structure */
+ spinlock_t lock;
int tag;
struct p9_fcall *tcall;
struct p9_fcall *rcall;
@@ -104,7 +135,39 @@
struct list_head req_list;
};
-struct p9_mux_poll_task;
+struct p9_mux_poll_task {
+ struct task_struct *task;
+ struct list_head mux_list;
+ int muxnum;
+};
+
+/**
+ * struct p9_conn - fd mux connection state information
+ * @lock: protects mux_list (?)
+ * @mux_list: list link for mux to manage multiple connections (?)
+ * @poll_task: task polling on this connection
+ * @msize: maximum size for connection (dup)
+ * @extended: 9p2000.u flag (dup)
+ * @trans: reference to transport instance for this connection
+ * @tagpool: id accounting for transactions
+ * @err: error state
+ * @equeue: event wait_q (?)
+ * @req_list: accounting for requests which have been sent
+ * @unsent_req_list: accounting for requests that haven't been sent
+ * @rcall: current response &p9_fcall structure
+ * @rpos: read position in current frame
+ * @rbuf: current read buffer
+ * @wpos: write position for current frame
+ * @wsize: amount of data to write for current frame
+ * @wbuf: current write buffer
+ * @poll_wait: array of wait_q's for various worker threads
+ * @poll_waddr: ????
+ * @pt: poll state
+ * @rq: current read work
+ * @wq: current write work
+ * @wsched: ????
+ *
+ */
struct p9_conn {
spinlock_t lock; /* protect lock structure */
@@ -132,11 +195,16 @@
unsigned long wsched;
};
-struct p9_mux_poll_task {
- struct task_struct *task;
- struct list_head mux_list;
- int muxnum;
-};
+/**
+ * struct p9_mux_rpc - fd mux rpc accounting structure
+ * @m: connection this request was issued on
+ * @err: error state
+ * @tcall: request &p9_fcall
+ * @rcall: response &p9_fcall
+ * @wqueue: wait queue that client is blocked on for this rpc
+ *
+ * Bug: isn't this information duplicated elsewhere like &p9_req
+ */
struct p9_mux_rpc {
struct p9_conn *m;
@@ -207,10 +275,12 @@
/**
* p9_mux_calc_poll_procs - calculates the number of polling procs
- * based on the number of mounted v9fs filesystems.
+ * @muxnum: number of mounts
*
+ * Calculation is based on the number of mounted v9fs filesystems.
* The current implementation returns sqrt of the number of mounts.
*/
+
static int p9_mux_calc_poll_procs(int muxnum)
{
int n;
@@ -331,12 +401,11 @@
/**
* p9_conn_create - allocate and initialize the per-session mux data
- * Creates the polling task if this is the first session.
+ * @trans: transport structure
*
- * @trans - transport structure
- * @msize - maximum message size
- * @extended - extended flag
+ * Note: Creates the polling task if this is the first session.
*/
+
static struct p9_conn *p9_conn_create(struct p9_trans *trans)
{
int i, n;
@@ -406,7 +475,10 @@
/**
* p9_mux_destroy - cancels all pending requests and frees mux resources
+ * @m: mux to destroy
+ *
*/
+
static void p9_conn_destroy(struct p9_conn *m)
{
P9_DPRINTK(P9_DEBUG_MUX, "mux %p prev %p next %p\n", m,
@@ -429,9 +501,14 @@
}
/**
- * p9_pollwait - called by files poll operation to add v9fs-poll task
- * to files wait queue
+ * p9_pollwait - add poll task to the wait queue
+ * @filp: file pointer being polled
+ * @wait_address: wait_q to block on
+ * @p: poll state
+ *
+ * called by files poll operation to add v9fs-poll task to files wait queue
*/
+
static void
p9_pollwait(struct file *filp, wait_queue_head_t *wait_address, poll_table *p)
{
@@ -462,7 +539,10 @@
/**
* p9_poll_mux - polls a mux and schedules read or write works if necessary
+ * @m: connection to poll
+ *
*/
+
static void p9_poll_mux(struct p9_conn *m)
{
int n;
@@ -499,9 +579,14 @@
}
/**
- * p9_poll_proc - polls all v9fs transports for new events and queues
- * the appropriate work to the work queue
+ * p9_poll_proc - poll worker thread
+ * @a: thread state and arguments
+ *
+ * polls all v9fs transports for new events and queues the appropriate
+ * work to the work queue
+ *
*/
+
static int p9_poll_proc(void *a)
{
struct p9_conn *m, *mtmp;
@@ -527,7 +612,10 @@
/**
* p9_write_work - called when a transport can send some data
+ * @work: container for work to be done
+ *
*/
+
static void p9_write_work(struct work_struct *work)
{
int n, err;
@@ -638,7 +726,10 @@
/**
* p9_read_work - called when there is some data to be read from a transport
+ * @work: container of work to be done
+ *
*/
+
static void p9_read_work(struct work_struct *work)
{
int n, err;
@@ -793,7 +884,9 @@
* @tc: request to be sent
* @cb: callback function to call when response is received
* @cba: parameter to pass to the callback function
+ *
*/
+
static struct p9_req *p9_send_request(struct p9_conn *m,
struct p9_fcall *tc,
p9_conn_req_callback cb, void *cba)
@@ -961,10 +1054,12 @@
/**
* p9_fd_rpc- sends 9P request and waits until a response is available.
* The function can be interrupted.
- * @m: mux data
+ * @t: transport data
* @tc: request to be sent
* @rc: pointer where a pointer to the response is stored
+ *
*/
+
int
p9_fd_rpc(struct p9_trans *t, struct p9_fcall *tc, struct p9_fcall **rc)
{
@@ -1041,8 +1136,10 @@
* @m: mux data
* @tc: request to be sent
* @cb: callback function to be called when response arrives
- * @cba: value to pass to the callback function
+ * @a: value to pass to the callback function
+ *
*/
+
int p9_conn_rpcnb(struct p9_conn *m, struct p9_fcall *tc,
p9_conn_req_callback cb, void *a)
{
@@ -1065,7 +1162,9 @@
* p9_conn_cancel - cancel all pending requests with error
* @m: mux data
* @err: error code
+ *
*/
+
void p9_conn_cancel(struct p9_conn *m, int err)
{
struct p9_req *req, *rtmp;
@@ -1097,35 +1196,46 @@
}
/**
- * v9fs_parse_options - parse mount options into session structure
+ * parse_options - parse mount options into session structure
* @options: options string passed from mount
- * @v9ses: existing v9fs session information
+ * @opts: transport-specific structure to parse options into
*
+ * Returns 0 upon success, -ERRNO upon failure
*/
-static void parse_opts(char *options, struct p9_fd_opts *opts)
+static int parse_opts(char *params, struct p9_fd_opts *opts)
{
char *p;
substring_t args[MAX_OPT_ARGS];
int option;
+ char *options;
int ret;
opts->port = P9_PORT;
opts->rfd = ~0;
opts->wfd = ~0;
- if (!options)
- return;
+ if (!params)
+ return 0;
+
+ options = kstrdup(params, GFP_KERNEL);
+ if (!options) {
+ P9_DPRINTK(P9_DEBUG_ERROR,
+ "failed to allocate copy of option string\n");
+ return -ENOMEM;
+ }
while ((p = strsep(&options, ",")) != NULL) {
int token;
+ int r;
if (!*p)
continue;
token = match_token(p, tokens, args);
- ret = match_int(&args[0], &option);
- if (ret < 0) {
+ r = match_int(&args[0], &option);
+ if (r < 0) {
P9_DPRINTK(P9_DEBUG_ERROR,
"integer field, but no integer?\n");
+ ret = r;
continue;
}
switch (token) {
@@ -1142,6 +1252,8 @@
continue;
}
}
+ kfree(options);
+ return 0;
}
static int p9_fd_open(struct p9_trans *trans, int rfd, int wfd)
@@ -1193,11 +1305,12 @@
/**
* p9_fd_read- read from a fd
- * @v9ses: session information
+ * @trans: transport instance state
* @v: buffer to receive data into
* @len: size of receive buffer
*
*/
+
static int p9_fd_read(struct p9_trans *trans, void *v, int len)
{
int ret;
@@ -1220,11 +1333,12 @@
/**
* p9_fd_write - write to a socket
- * @v9ses: session information
+ * @trans: transport instance state
* @v: buffer to send data from
* @len: size of send buffer
*
*/
+
static int p9_fd_write(struct p9_trans *trans, void *v, int len)
{
int ret;
@@ -1296,6 +1410,7 @@
* @trans: private socket structure
*
*/
+
static void p9_fd_close(struct p9_trans *trans)
{
struct p9_trans_fd *ts;
@@ -1318,6 +1433,23 @@
kfree(ts);
}
+/*
+ * stolen from NFS - maybe should be made a generic function?
+ */
+static inline int valid_ipaddr4(const char *buf)
+{
+ int rc, count, in[4];
+
+ rc = sscanf(buf, "%d.%d.%d.%d", &in[0], &in[1], &in[2], &in[3]);
+ if (rc != 4)
+ return -EINVAL;
+ for (count = 0; count < 4; count++) {
+ if (in[count] > 255)
+ return -EINVAL;
+ }
+ return 0;
+}
+
static struct p9_trans *
p9_trans_create_tcp(const char *addr, char *args, int msize, unsigned char dotu)
{
@@ -1328,7 +1460,12 @@
struct p9_fd_opts opts;
struct p9_trans_fd *p;
- parse_opts(args, &opts);
+ err = parse_opts(args, &opts);
+ if (err < 0)
+ return ERR_PTR(err);
+
+ if (valid_ipaddr4(addr) < 0)
+ return ERR_PTR(-EINVAL);
csocket = NULL;
trans = kmalloc(sizeof(struct p9_trans), GFP_KERNEL);
@@ -1508,7 +1645,7 @@
.create = p9_trans_create_fd,
};
-static int __init p9_trans_fd_init(void)
+int p9_trans_fd_init(void)
{
int ret = p9_mux_global_init();
if (ret) {
@@ -1522,9 +1659,4 @@
return 0;
}
-
-module_init(p9_trans_fd_init);
-
-MODULE_AUTHOR("Latchesar Ionkov <lucho@ionkov.net>");
-MODULE_AUTHOR("Eric Van Hensbergen <ericvh@gmail.com>");
-MODULE_LICENSE("GPL");
+EXPORT_SYMBOL(p9_trans_fd_init);
diff --git a/net/9p/trans_virtio.c b/net/9p/trans_virtio.c
index de7a9f5..42adc05 100644
--- a/net/9p/trans_virtio.c
+++ b/net/9p/trans_virtio.c
@@ -49,29 +49,75 @@
#define VIRTQUEUE_NUM 128
/* a single mutex to manage channel initialization and attachment */
-static DECLARE_MUTEX(virtio_9p_lock);
+static DEFINE_MUTEX(virtio_9p_lock);
/* global which tracks highest initialized channel */
static int chan_index;
#define P9_INIT_MAXTAG 16
-#define REQ_STATUS_IDLE 0
-#define REQ_STATUS_SENT 1
-#define REQ_STATUS_RCVD 2
-#define REQ_STATUS_FLSH 3
+
+/**
+ * enum p9_req_status_t - virtio request status
+ * @REQ_STATUS_IDLE: request slot unused
+ * @REQ_STATUS_SENT: request sent to server
+ * @REQ_STATUS_RCVD: response received from server
+ * @REQ_STATUS_FLSH: request has been flushed
+ *
+ * The @REQ_STATUS_IDLE state is used to mark a request slot as unused
+ * but use is actually tracked by the idpool structure which handles tag
+ * id allocation.
+ *
+ */
+
+enum p9_req_status_t {
+ REQ_STATUS_IDLE,
+ REQ_STATUS_SENT,
+ REQ_STATUS_RCVD,
+ REQ_STATUS_FLSH,
+};
+
+/**
+ * struct p9_req_t - virtio request slots
+ * @status: status of this request slot
+ * @wq: wait_queue for the client to block on for this request
+ *
+ * The virtio transport uses an array to track outstanding requests
+ * instead of a list. While this may incurr overhead during initial
+ * allocation or expansion, it makes request lookup much easier as the
+ * tag id is a index into an array. (We use tag+1 so that we can accomodate
+ * the -1 tag for the T_VERSION request).
+ * This also has the nice effect of only having to allocate wait_queues
+ * once, instead of constantly allocating and freeing them. Its possible
+ * other resources could benefit from this scheme as well.
+ *
+ */
struct p9_req_t {
int status;
wait_queue_head_t *wq;
};
-/* We keep all per-channel information in a structure.
+/**
+ * struct virtio_chan - per-instance transport information
+ * @initialized: whether the channel is initialized
+ * @inuse: whether the channel is in use
+ * @lock: protects multiple elements within this structure
+ * @vdev: virtio dev associated with this channel
+ * @vq: virtio queue associated with this channel
+ * @tagpool: accounting for tag ids (and request slots)
+ * @reqs: array of request slots
+ * @max_tag: current number of request_slots allocated
+ * @sg: scatter gather list which is used to pack a request (protected?)
+ *
+ * We keep all per-channel information in a structure.
* This structure is allocated within the devices dev->mem space.
* A pointer to the structure will get put in the transport private.
+ *
*/
+
static struct virtio_chan {
- bool initialized; /* channel is initialized */
- bool inuse; /* channel is in use */
+ bool initialized;
+ bool inuse;
spinlock_t lock;
@@ -86,7 +132,19 @@
struct scatterlist sg[VIRTQUEUE_NUM];
} channels[MAX_9P_CHAN];
-/* Lookup requests by tag */
+/**
+ * p9_lookup_tag - Lookup requests by tag
+ * @c: virtio channel to lookup tag within
+ * @tag: numeric id for transaction
+ *
+ * this is a simple array lookup, but will grow the
+ * request_slots as necessary to accomodate transaction
+ * ids which did not previously have a slot.
+ *
+ * Bugs: there is currently no upper limit on request slots set
+ * here, but that should be constrained by the id accounting.
+ */
+
static struct p9_req_t *p9_lookup_tag(struct virtio_chan *c, u16 tag)
{
/* This looks up the original request by tag so we know which
@@ -130,11 +188,20 @@
return PAGE_SIZE - ((unsigned long)data % PAGE_SIZE);
}
+/**
+ * p9_virtio_close - reclaim resources of a channel
+ * @trans: transport state
+ *
+ * This reclaims a channel by freeing its resources and
+ * reseting its inuse flag.
+ *
+ */
+
static void p9_virtio_close(struct p9_trans *trans)
{
struct virtio_chan *chan = trans->priv;
int count;
- unsigned int flags;
+ unsigned long flags;
spin_lock_irqsave(&chan->lock, flags);
p9_idpool_destroy(chan->tagpool);
@@ -144,13 +211,26 @@
chan->max_tag = 0;
spin_unlock_irqrestore(&chan->lock, flags);
- down(&virtio_9p_lock);
+ mutex_lock(&virtio_9p_lock);
chan->inuse = false;
- up(&virtio_9p_lock);
+ mutex_unlock(&virtio_9p_lock);
kfree(trans);
}
+/**
+ * req_done - callback which signals activity from the server
+ * @vq: virtio queue activity was received on
+ *
+ * This notifies us that the server has triggered some activity
+ * on the virtio channel - most likely a response to request we
+ * sent. Figure out which requests now have responses and wake up
+ * those threads.
+ *
+ * Bugs: could do with some additional sanity checking, but appears to work.
+ *
+ */
+
static void req_done(struct virtqueue *vq)
{
struct virtio_chan *chan = vq->vdev->priv;
@@ -169,6 +249,20 @@
spin_unlock_irqrestore(&chan->lock, flags);
}
+/**
+ * pack_sg_list - pack a scatter gather list from a linear buffer
+ * @sg: scatter/gather list to pack into
+ * @start: which segment of the sg_list to start at
+ * @limit: maximum segment to pack data to
+ * @data: data to pack into scatter/gather list
+ * @count: amount of data to pack into the scatter/gather list
+ *
+ * sg_lists have multiple segments of various sizes. This will pack
+ * arbitrary data into an existing scatter gather list, segmenting the
+ * data as necessary within constraints.
+ *
+ */
+
static int
pack_sg_list(struct scatterlist *sg, int start, int limit, char *data,
int count)
@@ -189,6 +283,14 @@
return index-start;
}
+/**
+ * p9_virtio_rpc - issue a request and wait for a response
+ * @t: transport state
+ * @tc: &p9_fcall request to transmit
+ * @rc: &p9_fcall to put reponse into
+ *
+ */
+
static int
p9_virtio_rpc(struct p9_trans *t, struct p9_fcall *tc, struct p9_fcall **rc)
{
@@ -263,16 +365,26 @@
return 0;
}
+/**
+ * p9_virtio_probe - probe for existence of 9P virtio channels
+ * @vdev: virtio device to probe
+ *
+ * This probes for existing virtio channels. At present only
+ * a single channel is in use, so in the future more work may need
+ * to be done here.
+ *
+ */
+
static int p9_virtio_probe(struct virtio_device *vdev)
{
int err;
struct virtio_chan *chan;
int index;
- down(&virtio_9p_lock);
+ mutex_lock(&virtio_9p_lock);
index = chan_index++;
chan = &channels[index];
- up(&virtio_9p_lock);
+ mutex_unlock(&virtio_9p_lock);
if (chan_index > MAX_9P_CHAN) {
printk(KERN_ERR "9p: virtio: Maximum channels exceeded\n");
@@ -301,17 +413,34 @@
out_free_vq:
vdev->config->del_vq(chan->vq);
fail:
- down(&virtio_9p_lock);
+ mutex_lock(&virtio_9p_lock);
chan_index--;
- up(&virtio_9p_lock);
+ mutex_unlock(&virtio_9p_lock);
return err;
}
-/* This sets up a transport channel for 9p communication. Right now
+
+/**
+ * p9_virtio_create - allocate a new virtio channel
+ * @devname: string identifying the channel to connect to (unused)
+ * @args: args passed from sys_mount() for per-transport options (unused)
+ * @msize: requested maximum packet size
+ * @extended: 9p2000.u enabled flag
+ *
+ * This sets up a transport channel for 9p communication. Right now
* we only match the first available channel, but eventually we couldlook up
* alternate channels by matching devname versus a virtio_config entry.
* We use a simple reference count mechanism to ensure that only a single
- * mount has a channel open at a time. */
+ * mount has a channel open at a time.
+ *
+ * Bugs: doesn't allow identification of a specific channel
+ * to allocate, channels are allocated sequentially. This was
+ * a pragmatic decision to get things rolling, but ideally some
+ * way of identifying the channel to attach to would be nice
+ * if we are going to support multiple channels.
+ *
+ */
+
static struct p9_trans *
p9_virtio_create(const char *devname, char *args, int msize,
unsigned char extended)
@@ -320,7 +449,7 @@
struct virtio_chan *chan = channels;
int index = 0;
- down(&virtio_9p_lock);
+ mutex_lock(&virtio_9p_lock);
while (index < MAX_9P_CHAN) {
if (chan->initialized && !chan->inuse) {
chan->inuse = true;
@@ -330,7 +459,7 @@
chan = &channels[index];
}
}
- up(&virtio_9p_lock);
+ mutex_unlock(&virtio_9p_lock);
if (index >= MAX_9P_CHAN) {
printk(KERN_ERR "9p: no channels available\n");
@@ -360,6 +489,12 @@
return trans;
}
+/**
+ * p9_virtio_remove - clean up resources associated with a virtio device
+ * @vdev: virtio device to remove
+ *
+ */
+
static void p9_virtio_remove(struct virtio_device *vdev)
{
struct virtio_chan *chan = vdev->priv;
diff --git a/net/9p/util.c b/net/9p/util.c
index ef72155..958fc58 100644
--- a/net/9p/util.c
+++ b/net/9p/util.c
@@ -32,11 +32,23 @@
#include <linux/idr.h>
#include <net/9p/9p.h>
+/**
+ * struct p9_idpool - per-connection accounting for tag idpool
+ * @lock: protects the pool
+ * @pool: idr to allocate tag id from
+ *
+ */
+
struct p9_idpool {
spinlock_t lock;
struct idr pool;
};
+/**
+ * p9_idpool_create - create a new per-connection id pool
+ *
+ */
+
struct p9_idpool *p9_idpool_create(void)
{
struct p9_idpool *p;
@@ -52,6 +64,11 @@
}
EXPORT_SYMBOL(p9_idpool_create);
+/**
+ * p9_idpool_destroy - create a new per-connection id pool
+ * @p: idpool to destory
+ */
+
void p9_idpool_destroy(struct p9_idpool *p)
{
idr_destroy(&p->pool);
@@ -61,9 +78,9 @@
/**
* p9_idpool_get - allocate numeric id from pool
- * @p - pool to allocate from
+ * @p: pool to allocate from
*
- * XXX - This seems to be an awful generic function, should it be in idr.c with
+ * Bugs: This seems to be an awful generic function, should it be in idr.c with
* the lock included in struct idr?
*/
@@ -71,7 +88,7 @@
{
int i = 0;
int error;
- unsigned int flags;
+ unsigned long flags;
retry:
if (idr_pre_get(&p->pool, GFP_KERNEL) == 0)
@@ -94,15 +111,16 @@
/**
* p9_idpool_put - release numeric id from pool
- * @p - pool to allocate from
+ * @id: numeric id which is being released
+ * @p: pool to release id into
*
- * XXX - This seems to be an awful generic function, should it be in idr.c with
+ * Bugs: This seems to be an awful generic function, should it be in idr.c with
* the lock included in struct idr?
*/
void p9_idpool_put(int id, struct p9_idpool *p)
{
- unsigned int flags;
+ unsigned long flags;
spin_lock_irqsave(&p->lock, flags);
idr_remove(&p->pool, id);
spin_unlock_irqrestore(&p->lock, flags);
@@ -111,11 +129,13 @@
/**
* p9_idpool_check - check if the specified id is available
- * @id - id to check
- * @p - pool
+ * @id: id to check
+ * @p: pool to check
*/
+
int p9_idpool_check(int id, struct p9_idpool *p)
{
return idr_find(&p->pool, id) != NULL;
}
EXPORT_SYMBOL(p9_idpool_check);
+
diff --git a/net/ax25/ax25_subr.c b/net/ax25/ax25_subr.c
index d8f2157..034aa10 100644
--- a/net/ax25/ax25_subr.c
+++ b/net/ax25/ax25_subr.c
@@ -64,20 +64,15 @@
void ax25_requeue_frames(ax25_cb *ax25)
{
- struct sk_buff *skb, *skb_prev = NULL;
+ struct sk_buff *skb;
/*
* Requeue all the un-ack-ed frames on the output queue to be picked
* up by ax25_kick called from the timer. This arrangement handles the
* possibility of an empty output queue.
*/
- while ((skb = skb_dequeue(&ax25->ack_queue)) != NULL) {
- if (skb_prev == NULL)
- skb_queue_head(&ax25->write_queue, skb);
- else
- skb_append(skb_prev, skb, &ax25->write_queue);
- skb_prev = skb;
- }
+ while ((skb = skb_dequeue_tail(&ax25->ack_queue)) != NULL)
+ skb_queue_head(&ax25->write_queue, skb);
}
/*
diff --git a/net/bluetooth/rfcomm/core.c b/net/bluetooth/rfcomm/core.c
index eb62558..0c2c937 100644
--- a/net/bluetooth/rfcomm/core.c
+++ b/net/bluetooth/rfcomm/core.c
@@ -423,8 +423,8 @@
rfcomm_dlc_lock(d);
d->state = BT_CLOSED;
- rfcomm_dlc_unlock(d);
d->state_change(d, err);
+ rfcomm_dlc_unlock(d);
skb_queue_purge(&d->tx_queue);
rfcomm_dlc_unlink(d);
diff --git a/net/bluetooth/rfcomm/tty.c b/net/bluetooth/rfcomm/tty.c
index c3f749a..c919187 100644
--- a/net/bluetooth/rfcomm/tty.c
+++ b/net/bluetooth/rfcomm/tty.c
@@ -566,11 +566,22 @@
if (dlc->state == BT_CLOSED) {
if (!dev->tty) {
if (test_bit(RFCOMM_RELEASE_ONHUP, &dev->flags)) {
- if (rfcomm_dev_get(dev->id) == NULL)
+ /* Drop DLC lock here to avoid deadlock
+ * 1. rfcomm_dev_get will take rfcomm_dev_lock
+ * but in rfcomm_dev_add there's lock order:
+ * rfcomm_dev_lock -> dlc lock
+ * 2. rfcomm_dev_put will deadlock if it's
+ * the last reference
+ */
+ rfcomm_dlc_unlock(dlc);
+ if (rfcomm_dev_get(dev->id) == NULL) {
+ rfcomm_dlc_lock(dlc);
return;
+ }
rfcomm_dev_del(dev);
rfcomm_dev_put(dev);
+ rfcomm_dlc_lock(dlc);
}
} else
tty_hangup(dev->tty);
diff --git a/net/core/dev.c b/net/core/dev.c
index a1607bc..5829630 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -903,7 +903,11 @@
strlcpy(dev->name, newname, IFNAMSIZ);
rollback:
- device_rename(&dev->dev, dev->name);
+ err = device_rename(&dev->dev, dev->name);
+ if (err) {
+ memcpy(dev->name, oldname, IFNAMSIZ);
+ return err;
+ }
write_lock_bh(&dev_base_lock);
hlist_del(&dev->name_hlist);
@@ -3137,7 +3141,7 @@
* Load in the correct multicast list now the flags have changed.
*/
- if (dev->change_rx_flags && (dev->flags ^ flags) & IFF_MULTICAST)
+ if (dev->change_rx_flags && (old_flags ^ flags) & IFF_MULTICAST)
dev->change_rx_flags(dev, IFF_MULTICAST);
dev_set_rx_mode(dev);
diff --git a/net/core/neighbour.c b/net/core/neighbour.c
index 5d9d713..65f01f7 100644
--- a/net/core/neighbour.c
+++ b/net/core/neighbour.c
@@ -1714,7 +1714,8 @@
return nla_nest_end(skb, nest);
nla_put_failure:
- return nla_nest_cancel(skb, nest);
+ nla_nest_cancel(skb, nest);
+ return -EMSGSIZE;
}
static int neightbl_fill_info(struct sk_buff *skb, struct neigh_table *tbl,
@@ -2057,9 +2058,9 @@
goto nla_put_failure;
}
- ci.ndm_used = now - neigh->used;
- ci.ndm_confirmed = now - neigh->confirmed;
- ci.ndm_updated = now - neigh->updated;
+ ci.ndm_used = jiffies_to_clock_t(now - neigh->used);
+ ci.ndm_confirmed = jiffies_to_clock_t(now - neigh->confirmed);
+ ci.ndm_updated = jiffies_to_clock_t(now - neigh->updated);
ci.ndm_refcnt = atomic_read(&neigh->refcnt) - 1;
read_unlock_bh(&neigh->lock);
diff --git a/net/core/netpoll.c b/net/core/netpoll.c
index b04d643..8fb134d 100644
--- a/net/core/netpoll.c
+++ b/net/core/netpoll.c
@@ -419,7 +419,7 @@
return;
size = arp_hdr_len(skb->dev);
- send_skb = find_skb(np, size + LL_RESERVED_SPACE(np->dev),
+ send_skb = find_skb(np, size + LL_ALLOCATED_SPACE(np->dev),
LL_RESERVED_SPACE(np->dev));
if (!send_skb)
diff --git a/net/core/pktgen.c b/net/core/pktgen.c
index 8dca211..fdf5377 100644
--- a/net/core/pktgen.c
+++ b/net/core/pktgen.c
@@ -390,6 +390,7 @@
int cpu;
wait_queue_head_t queue;
+ struct completion start_done;
};
#define REMOVE 1
@@ -3414,6 +3415,7 @@
BUG_ON(smp_processor_id() != cpu);
init_waitqueue_head(&t->queue);
+ complete(&t->start_done);
pr_debug("pktgen: starting pktgen/%d: pid=%d\n", cpu, task_pid_nr(current));
@@ -3615,6 +3617,7 @@
INIT_LIST_HEAD(&t->if_list);
list_add_tail(&t->th_list, &pktgen_threads);
+ init_completion(&t->start_done);
p = kthread_create(pktgen_thread_worker, t, "kpktgend_%d", cpu);
if (IS_ERR(p)) {
@@ -3639,6 +3642,7 @@
}
wake_up_process(p);
+ wait_for_completion(&t->start_done);
return 0;
}
diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c
index cf857c4..a9a7721 100644
--- a/net/core/rtnetlink.c
+++ b/net/core/rtnetlink.c
@@ -498,7 +498,8 @@
return nla_nest_end(skb, mx);
nla_put_failure:
- return nla_nest_cancel(skb, mx);
+ nla_nest_cancel(skb, mx);
+ return -EMSGSIZE;
}
int rtnl_put_cacheinfo(struct sk_buff *skb, struct dst_entry *dst, u32 id,
diff --git a/net/core/skbuff.c b/net/core/skbuff.c
index 5c459f2..1e556d3 100644
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -1445,6 +1445,7 @@
if (spd.nr_pages) {
int ret;
+ struct sock *sk = __skb->sk;
/*
* Drop the socket lock, otherwise we have reverse
@@ -1455,9 +1456,9 @@
* we call into ->sendpage() with the i_mutex lock held
* and networking will grab the socket lock.
*/
- release_sock(__skb->sk);
+ release_sock(sk);
ret = splice_to_pipe(pipe, &spd);
- lock_sock(__skb->sk);
+ lock_sock(sk);
return ret;
}
diff --git a/net/core/sock.c b/net/core/sock.c
index fa76f04..88094cb 100644
--- a/net/core/sock.c
+++ b/net/core/sock.c
@@ -270,7 +270,7 @@
int err = 0;
int skb_len;
- /* Cast skb->rcvbuf to unsigned... It's pointless, but reduces
+ /* Cast sk->rcvbuf to unsigned... It's pointless, but reduces
number of warnings when compiling with -W --ANK
*/
if (atomic_read(&sk->sk_rmem_alloc) + skb->truesize >=
diff --git a/net/core/user_dma.c b/net/core/user_dma.c
index 0ad1cd5..c77aff9 100644
--- a/net/core/user_dma.c
+++ b/net/core/user_dma.c
@@ -75,7 +75,7 @@
end = start + skb_shinfo(skb)->frags[i].size;
copy = end - offset;
- if ((copy = end - offset) > 0) {
+ if (copy > 0) {
skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
struct page *page = frag->page;
diff --git a/net/dccp/ackvec.c b/net/dccp/ackvec.c
index 6de4bd1..1e8be24 100644
--- a/net/dccp/ackvec.c
+++ b/net/dccp/ackvec.c
@@ -290,12 +290,12 @@
while (1) {
const u8 len = dccp_ackvec_len(av, index);
- const u8 state = dccp_ackvec_state(av, index);
+ const u8 av_state = dccp_ackvec_state(av, index);
/*
* valid packets not yet in av_buf have a reserved
* entry, with a len equal to 0.
*/
- if (state == DCCP_ACKVEC_STATE_NOT_RECEIVED &&
+ if (av_state == DCCP_ACKVEC_STATE_NOT_RECEIVED &&
len == 0 && delta == 0) { /* Found our
reserved seat! */
dccp_pr_debug("Found %llu reserved seat!\n",
@@ -325,31 +325,6 @@
return -EILSEQ;
}
-#ifdef CONFIG_IP_DCCP_DEBUG
-void dccp_ackvector_print(const u64 ackno, const unsigned char *vector, int len)
-{
- dccp_pr_debug_cat("ACK vector len=%d, ackno=%llu |", len,
- (unsigned long long)ackno);
-
- while (len--) {
- const u8 state = (*vector & DCCP_ACKVEC_STATE_MASK) >> 6;
- const u8 rl = *vector & DCCP_ACKVEC_LEN_MASK;
-
- dccp_pr_debug_cat("%d,%d|", state, rl);
- ++vector;
- }
-
- dccp_pr_debug_cat("\n");
-}
-
-void dccp_ackvec_print(const struct dccp_ackvec *av)
-{
- dccp_ackvector_print(av->av_buf_ackno,
- av->av_buf + av->av_buf_head,
- av->av_vec_len);
-}
-#endif
-
static void dccp_ackvec_throw_record(struct dccp_ackvec *av,
struct dccp_ackvec_record *avr)
{
diff --git a/net/dccp/ccids/ccid3.c b/net/dccp/ccids/ccid3.c
index cd61dea..a1929f3 100644
--- a/net/dccp/ccids/ccid3.c
+++ b/net/dccp/ccids/ccid3.c
@@ -159,8 +159,8 @@
} else if (ktime_us_delta(now, hctx->ccid3hctx_t_ld)
- (s64)hctx->ccid3hctx_rtt >= 0) {
- hctx->ccid3hctx_x =
- max(min(2 * hctx->ccid3hctx_x, min_rate),
+ hctx->ccid3hctx_x = min(2 * hctx->ccid3hctx_x, min_rate);
+ hctx->ccid3hctx_x = max(hctx->ccid3hctx_x,
scaled_div(((__u64)hctx->ccid3hctx_s) << 6,
hctx->ccid3hctx_rtt));
hctx->ccid3hctx_t_ld = now;
@@ -193,22 +193,17 @@
/*
* Update Window Counter using the algorithm from [RFC 4342, 8.1].
- * The algorithm is not applicable if RTT < 4 microseconds.
+ * As elsewhere, RTT > 0 is assumed by using dccp_sample_rtt().
*/
static inline void ccid3_hc_tx_update_win_count(struct ccid3_hc_tx_sock *hctx,
ktime_t now)
{
- u32 quarter_rtts;
-
- if (unlikely(hctx->ccid3hctx_rtt < 4)) /* avoid divide-by-zero */
- return;
-
- quarter_rtts = ktime_us_delta(now, hctx->ccid3hctx_t_last_win_count);
- quarter_rtts /= hctx->ccid3hctx_rtt / 4;
+ u32 delta = ktime_us_delta(now, hctx->ccid3hctx_t_last_win_count),
+ quarter_rtts = (4 * delta) / hctx->ccid3hctx_rtt;
if (quarter_rtts > 0) {
hctx->ccid3hctx_t_last_win_count = now;
- hctx->ccid3hctx_last_win_count += min_t(u32, quarter_rtts, 5);
+ hctx->ccid3hctx_last_win_count += min(quarter_rtts, 5U);
hctx->ccid3hctx_last_win_count &= 0xF; /* mod 16 */
}
}
@@ -334,8 +329,14 @@
hctx->ccid3hctx_x = rfc3390_initial_rate(sk);
hctx->ccid3hctx_t_ld = now;
} else {
- /* Sender does not have RTT sample: X_pps = 1 pkt/sec */
- hctx->ccid3hctx_x = hctx->ccid3hctx_s;
+ /*
+ * Sender does not have RTT sample:
+ * - set fallback RTT (RFC 4340, 3.4) since a RTT value
+ * is needed in several parts (e.g. window counter);
+ * - set sending rate X_pps = 1pps as per RFC 3448, 4.2.
+ */
+ hctx->ccid3hctx_rtt = DCCP_FALLBACK_RTT;
+ hctx->ccid3hctx_x = hctx->ccid3hctx_s;
hctx->ccid3hctx_x <<= 6;
}
ccid3_update_send_interval(hctx);
diff --git a/net/dccp/ccids/lib/tfrc.c b/net/dccp/ccids/lib/tfrc.c
index d1dfbb8..97ecec0 100644
--- a/net/dccp/ccids/lib/tfrc.c
+++ b/net/dccp/ccids/lib/tfrc.c
@@ -14,14 +14,6 @@
MODULE_PARM_DESC(tfrc_debug, "Enable debug messages");
#endif
-extern int tfrc_tx_packet_history_init(void);
-extern void tfrc_tx_packet_history_exit(void);
-extern int tfrc_rx_packet_history_init(void);
-extern void tfrc_rx_packet_history_exit(void);
-
-extern int tfrc_li_init(void);
-extern void tfrc_li_exit(void);
-
static int __init tfrc_module_init(void)
{
int rc = tfrc_li_init();
diff --git a/net/dccp/ccids/lib/tfrc.h b/net/dccp/ccids/lib/tfrc.h
index 1fb1187..ed98575 100644
--- a/net/dccp/ccids/lib/tfrc.h
+++ b/net/dccp/ccids/lib/tfrc.h
@@ -15,7 +15,7 @@
* (at your option) any later version.
*/
#include <linux/types.h>
-#include <asm/div64.h>
+#include <linux/math64.h>
#include "../../dccp.h"
/* internal includes that this module exports: */
#include "loss_interval.h"
@@ -29,21 +29,19 @@
#endif
/* integer-arithmetic divisions of type (a * 1000000)/b */
-static inline u64 scaled_div(u64 a, u32 b)
+static inline u64 scaled_div(u64 a, u64 b)
{
BUG_ON(b==0);
- a *= 1000000;
- do_div(a, b);
- return a;
+ return div64_u64(a * 1000000, b);
}
-static inline u32 scaled_div32(u64 a, u32 b)
+static inline u32 scaled_div32(u64 a, u64 b)
{
u64 result = scaled_div(a, b);
if (result > UINT_MAX) {
- DCCP_CRIT("Overflow: a(%llu)/b(%u) > ~0U",
- (unsigned long long)a, b);
+ DCCP_CRIT("Overflow: %llu/%llu > UINT_MAX",
+ (unsigned long long)a, (unsigned long long)b);
return UINT_MAX;
}
return result;
@@ -58,7 +56,14 @@
return avg ? (weight * avg + (10 - weight) * newval) / 10 : newval;
}
-extern u32 tfrc_calc_x(u16 s, u32 R, u32 p);
-extern u32 tfrc_calc_x_reverse_lookup(u32 fvalue);
+extern u32 tfrc_calc_x(u16 s, u32 R, u32 p);
+extern u32 tfrc_calc_x_reverse_lookup(u32 fvalue);
+extern int tfrc_tx_packet_history_init(void);
+extern void tfrc_tx_packet_history_exit(void);
+extern int tfrc_rx_packet_history_init(void);
+extern void tfrc_rx_packet_history_exit(void);
+
+extern int tfrc_li_init(void);
+extern void tfrc_li_exit(void);
#endif /* _TFRC_H_ */
diff --git a/net/dccp/ccids/lib/tfrc_equation.c b/net/dccp/ccids/lib/tfrc_equation.c
index e4e64b7..2f20a29 100644
--- a/net/dccp/ccids/lib/tfrc_equation.c
+++ b/net/dccp/ccids/lib/tfrc_equation.c
@@ -661,7 +661,7 @@
EXPORT_SYMBOL_GPL(tfrc_calc_x);
-/*
+/**
* tfrc_calc_x_reverse_lookup - try to find p given f(p)
*
* @fvalue: function value to match, scaled by 1000000
@@ -676,11 +676,11 @@
/* Error cases. */
if (fvalue < tfrc_calc_x_lookup[0][1]) {
- DCCP_WARN("fvalue %d smaller than resolution\n", fvalue);
- return tfrc_calc_x_lookup[0][1];
+ DCCP_WARN("fvalue %u smaller than resolution\n", fvalue);
+ return TFRC_SMALLEST_P;
}
if (fvalue > tfrc_calc_x_lookup[TFRC_CALC_X_ARRSIZE - 1][0]) {
- DCCP_WARN("fvalue %d exceeds bounds!\n", fvalue);
+ DCCP_WARN("fvalue %u exceeds bounds!\n", fvalue);
return 1000000;
}
diff --git a/net/dccp/ipv4.c b/net/dccp/ipv4.c
index b348dd7..37d27bc 100644
--- a/net/dccp/ipv4.c
+++ b/net/dccp/ipv4.c
@@ -589,7 +589,7 @@
if (sk_acceptq_is_full(sk) && inet_csk_reqsk_queue_young(sk) > 1)
goto drop;
- req = reqsk_alloc(&dccp_request_sock_ops);
+ req = inet_reqsk_alloc(&dccp_request_sock_ops);
if (req == NULL)
goto drop;
@@ -605,7 +605,6 @@
ireq = inet_rsk(req);
ireq->loc_addr = ip_hdr(skb)->daddr;
ireq->rmt_addr = ip_hdr(skb)->saddr;
- ireq->opt = NULL;
/*
* Step 3: Process LISTEN state
@@ -739,8 +738,8 @@
* If P.type is not Data, Ack, or DataAck and P.X == 0 (the packet
* has short sequence numbers), drop packet and return
*/
- if (dh->dccph_type >= DCCP_PKT_DATA &&
- dh->dccph_type <= DCCP_PKT_DATAACK && dh->dccph_x == 0) {
+ if ((dh->dccph_type < DCCP_PKT_DATA ||
+ dh->dccph_type > DCCP_PKT_DATAACK) && dh->dccph_x == 0) {
DCCP_WARN("P.type (%s) not Data || [Data]Ack, while P.X == 0\n",
dccp_packet_name(dh->dccph_type));
return 1;
diff --git a/net/dccp/ipv6.c b/net/dccp/ipv6.c
index 9b1129b..f7fe2a5 100644
--- a/net/dccp/ipv6.c
+++ b/net/dccp/ipv6.c
@@ -421,7 +421,6 @@
ireq6 = inet6_rsk(req);
ipv6_addr_copy(&ireq6->rmt_addr, &ipv6_hdr(skb)->saddr);
ipv6_addr_copy(&ireq6->loc_addr, &ipv6_hdr(skb)->daddr);
- ireq6->pktopts = NULL;
if (ipv6_opt_accepted(sk, skb) ||
np->rxopt.bits.rxinfo || np->rxopt.bits.rxoinfo ||
diff --git a/net/dccp/minisocks.c b/net/dccp/minisocks.c
index 33ad483..66dca5b 100644
--- a/net/dccp/minisocks.c
+++ b/net/dccp/minisocks.c
@@ -165,12 +165,12 @@
/* See dccp_v4_conn_request */
newdmsk->dccpms_sequence_window = req->rcv_wnd;
- newdp->dccps_gar = newdp->dccps_isr = dreq->dreq_isr;
- dccp_update_gsr(newsk, dreq->dreq_isr);
-
- newdp->dccps_iss = dreq->dreq_iss;
+ newdp->dccps_gar = newdp->dccps_iss = dreq->dreq_iss;
dccp_update_gss(newsk, dreq->dreq_iss);
+ newdp->dccps_isr = dreq->dreq_isr;
+ dccp_update_gsr(newsk, dreq->dreq_isr);
+
/*
* SWL and AWL are initially adjusted so that they are not less than
* the initial Sequence Numbers received and sent, respectively:
diff --git a/net/dccp/options.c b/net/dccp/options.c
index d2a84a2..43bc24e 100644
--- a/net/dccp/options.c
+++ b/net/dccp/options.c
@@ -107,9 +107,11 @@
*
* CCID-specific options are ignored during connection setup, as
* negotiation may still be in progress (see RFC 4340, 10.3).
+ * The same applies to Ack Vectors, as these depend on the CCID.
*
*/
- if (dreq != NULL && opt >= 128)
+ if (dreq != NULL && (opt >= 128 ||
+ opt == DCCPO_ACK_VECTOR_0 || opt == DCCPO_ACK_VECTOR_1))
goto ignore_option;
switch (opt) {
diff --git a/net/dccp/output.c b/net/dccp/output.c
index 1f8a9b6..fe20068 100644
--- a/net/dccp/output.c
+++ b/net/dccp/output.c
@@ -508,6 +508,7 @@
EXPORT_SYMBOL_GPL(dccp_send_ack);
+#if 0
/* FIXME: Is this still necessary (11.3) - currently nowhere used by DCCP. */
void dccp_send_delayed_ack(struct sock *sk)
{
@@ -538,6 +539,7 @@
icsk->icsk_ack.timeout = timeout;
sk_reset_timer(sk, &icsk->icsk_delack_timer, timeout);
}
+#endif
void dccp_send_sync(struct sock *sk, const u64 ackno,
const enum dccp_pkt_type pkt_type)
diff --git a/net/dccp/probe.c b/net/dccp/probe.c
index 0bcdc92..81368a7 100644
--- a/net/dccp/probe.c
+++ b/net/dccp/probe.c
@@ -42,7 +42,7 @@
static const char procname[] = "dccpprobe";
-struct {
+static struct {
struct kfifo *fifo;
spinlock_t lock;
wait_queue_head_t wait;
diff --git a/net/econet/af_econet.c b/net/econet/af_econet.c
index 68d1544..7c9bb13 100644
--- a/net/econet/af_econet.c
+++ b/net/econet/af_econet.c
@@ -340,7 +340,7 @@
dev_hold(dev);
- skb = sock_alloc_send_skb(sk, len+LL_RESERVED_SPACE(dev),
+ skb = sock_alloc_send_skb(sk, len+LL_ALLOCATED_SPACE(dev),
msg->msg_flags & MSG_DONTWAIT, &err);
if (skb==NULL)
goto out_unlock;
diff --git a/net/ipv4/arp.c b/net/ipv4/arp.c
index 68b72a7..9b539fa 100644
--- a/net/ipv4/arp.c
+++ b/net/ipv4/arp.c
@@ -570,7 +570,7 @@
* Allocate a buffer
*/
- skb = alloc_skb(arp_hdr_len(dev) + LL_RESERVED_SPACE(dev), GFP_ATOMIC);
+ skb = alloc_skb(arp_hdr_len(dev) + LL_ALLOCATED_SPACE(dev), GFP_ATOMIC);
if (skb == NULL)
return NULL;
@@ -1288,7 +1288,6 @@
struct neighbour *n)
{
char hbuffer[HBUFFERLEN];
- const char hexbuf[] = "0123456789ABCDEF";
int k, j;
char tbuf[16];
struct net_device *dev = n->dev;
@@ -1302,8 +1301,8 @@
else {
#endif
for (k = 0, j = 0; k < HBUFFERLEN - 3 && j < dev->addr_len; j++) {
- hbuffer[k++] = hexbuf[(n->ha[j] >> 4) & 15];
- hbuffer[k++] = hexbuf[n->ha[j] & 15];
+ hbuffer[k++] = hex_asc_hi(n->ha[j]);
+ hbuffer[k++] = hex_asc_lo(n->ha[j]);
hbuffer[k++] = ':';
}
hbuffer[--k] = 0;
diff --git a/net/ipv4/cipso_ipv4.c b/net/ipv4/cipso_ipv4.c
index 05afb57..2c0e457 100644
--- a/net/ipv4/cipso_ipv4.c
+++ b/net/ipv4/cipso_ipv4.c
@@ -338,7 +338,7 @@
return -ENOENT;
hash = cipso_v4_map_cache_hash(key, key_len);
- bkt = hash & (CIPSO_V4_CACHE_BUCKETBITS - 1);
+ bkt = hash & (CIPSO_V4_CACHE_BUCKETS - 1);
spin_lock_bh(&cipso_v4_cache[bkt].lock);
list_for_each_entry(entry, &cipso_v4_cache[bkt].list, list) {
if (entry->hash == hash &&
@@ -417,7 +417,7 @@
atomic_inc(&secattr->cache->refcount);
entry->lsm_data = secattr->cache;
- bkt = entry->hash & (CIPSO_V4_CACHE_BUCKETBITS - 1);
+ bkt = entry->hash & (CIPSO_V4_CACHE_BUCKETS - 1);
spin_lock_bh(&cipso_v4_cache[bkt].lock);
if (cipso_v4_cache[bkt].size < cipso_v4_cache_bucketsize) {
list_add(&entry->list, &cipso_v4_cache[bkt].list);
diff --git a/net/ipv4/devinet.c b/net/ipv4/devinet.c
index 6848e47..79a7ef6 100644
--- a/net/ipv4/devinet.c
+++ b/net/ipv4/devinet.c
@@ -90,7 +90,6 @@
[IFA_LOCAL] = { .type = NLA_U32 },
[IFA_ADDRESS] = { .type = NLA_U32 },
[IFA_BROADCAST] = { .type = NLA_U32 },
- [IFA_ANYCAST] = { .type = NLA_U32 },
[IFA_LABEL] = { .type = NLA_STRING, .len = IFNAMSIZ - 1 },
};
@@ -536,9 +535,6 @@
if (tb[IFA_BROADCAST])
ifa->ifa_broadcast = nla_get_be32(tb[IFA_BROADCAST]);
- if (tb[IFA_ANYCAST])
- ifa->ifa_anycast = nla_get_be32(tb[IFA_ANYCAST]);
-
if (tb[IFA_LABEL])
nla_strlcpy(ifa->ifa_label, tb[IFA_LABEL], IFNAMSIZ);
else
@@ -745,7 +741,6 @@
break;
inet_del_ifa(in_dev, ifap, 0);
ifa->ifa_broadcast = 0;
- ifa->ifa_anycast = 0;
ifa->ifa_scope = 0;
}
@@ -1113,7 +1108,6 @@
+ nla_total_size(4) /* IFA_ADDRESS */
+ nla_total_size(4) /* IFA_LOCAL */
+ nla_total_size(4) /* IFA_BROADCAST */
- + nla_total_size(4) /* IFA_ANYCAST */
+ nla_total_size(IFNAMSIZ); /* IFA_LABEL */
}
@@ -1143,9 +1137,6 @@
if (ifa->ifa_broadcast)
NLA_PUT_BE32(skb, IFA_BROADCAST, ifa->ifa_broadcast);
- if (ifa->ifa_anycast)
- NLA_PUT_BE32(skb, IFA_ANYCAST, ifa->ifa_anycast);
-
if (ifa->ifa_label[0])
NLA_PUT_STRING(skb, IFA_LABEL, ifa->ifa_label);
diff --git a/net/ipv4/fib_frontend.c b/net/ipv4/fib_frontend.c
index 0f1557a..0b2ac6a 100644
--- a/net/ipv4/fib_frontend.c
+++ b/net/ipv4/fib_frontend.c
@@ -506,7 +506,6 @@
[RTA_PREFSRC] = { .type = NLA_U32 },
[RTA_METRICS] = { .type = NLA_NESTED },
[RTA_MULTIPATH] = { .len = sizeof(struct rtnexthop) },
- [RTA_PROTOINFO] = { .type = NLA_U32 },
[RTA_FLOW] = { .type = NLA_U32 },
};
diff --git a/net/ipv4/fib_semantics.c b/net/ipv4/fib_semantics.c
index 3b83c34..0d4d728 100644
--- a/net/ipv4/fib_semantics.c
+++ b/net/ipv4/fib_semantics.c
@@ -960,7 +960,10 @@
rtm->rtm_dst_len = dst_len;
rtm->rtm_src_len = 0;
rtm->rtm_tos = tos;
- rtm->rtm_table = tb_id;
+ if (tb_id < 256)
+ rtm->rtm_table = tb_id;
+ else
+ rtm->rtm_table = RT_TABLE_COMPAT;
NLA_PUT_U32(skb, RTA_TABLE, tb_id);
rtm->rtm_type = type;
rtm->rtm_flags = fi->fib_flags;
diff --git a/net/ipv4/igmp.c b/net/ipv4/igmp.c
index 6250f42..2769dc4 100644
--- a/net/ipv4/igmp.c
+++ b/net/ipv4/igmp.c
@@ -292,7 +292,7 @@
struct iphdr *pip;
struct igmpv3_report *pig;
- skb = alloc_skb(size + LL_RESERVED_SPACE(dev), GFP_ATOMIC);
+ skb = alloc_skb(size + LL_ALLOCATED_SPACE(dev), GFP_ATOMIC);
if (skb == NULL)
return NULL;
@@ -653,7 +653,7 @@
return -1;
}
- skb=alloc_skb(IGMP_SIZE+LL_RESERVED_SPACE(dev), GFP_ATOMIC);
+ skb=alloc_skb(IGMP_SIZE+LL_ALLOCATED_SPACE(dev), GFP_ATOMIC);
if (skb == NULL) {
ip_rt_put(rt);
return -1;
diff --git a/net/ipv4/inet_connection_sock.c b/net/ipv4/inet_connection_sock.c
index 828ea21..045e799 100644
--- a/net/ipv4/inet_connection_sock.c
+++ b/net/ipv4/inet_connection_sock.c
@@ -419,7 +419,8 @@
struct inet_connection_sock *icsk = inet_csk(parent);
struct request_sock_queue *queue = &icsk->icsk_accept_queue;
struct listen_sock *lopt = queue->listen_opt;
- int thresh = icsk->icsk_syn_retries ? : sysctl_tcp_synack_retries;
+ int max_retries = icsk->icsk_syn_retries ? : sysctl_tcp_synack_retries;
+ int thresh = max_retries;
unsigned long now = jiffies;
struct request_sock **reqp, *req;
int i, budget;
@@ -455,6 +456,9 @@
}
}
+ if (queue->rskq_defer_accept)
+ max_retries = queue->rskq_defer_accept;
+
budget = 2 * (lopt->nr_table_entries / (timeout / interval));
i = lopt->clock_hand;
@@ -462,8 +466,9 @@
reqp=&lopt->syn_table[i];
while ((req = *reqp) != NULL) {
if (time_after_eq(now, req->expires)) {
- if (req->retrans < thresh &&
- !req->rsk_ops->rtx_syn_ack(parent, req)) {
+ if ((req->retrans < (inet_rsk(req)->acked ? max_retries : thresh)) &&
+ (inet_rsk(req)->acked ||
+ !req->rsk_ops->rtx_syn_ack(parent, req))) {
unsigned long timeo;
if (req->retrans++ == 0)
diff --git a/net/ipv4/ip_gre.c b/net/ipv4/ip_gre.c
index 2ada033..4342cba 100644
--- a/net/ipv4/ip_gre.c
+++ b/net/ipv4/ip_gre.c
@@ -313,9 +313,8 @@
static void ipgre_err(struct sk_buff *skb, u32 info)
{
-#ifndef I_WISH_WORLD_WERE_PERFECT
-/* It is not :-( All the routers (except for Linux) return only
+/* All the routers (except for Linux) return only
8 bytes of packet payload. It means, that precise relaying of
ICMP in the real Internet is absolutely infeasible.
@@ -398,149 +397,6 @@
out:
read_unlock(&ipgre_lock);
return;
-#else
- struct iphdr *iph = (struct iphdr*)dp;
- struct iphdr *eiph;
- __be16 *p = (__be16*)(dp+(iph->ihl<<2));
- const int type = icmp_hdr(skb)->type;
- const int code = icmp_hdr(skb)->code;
- int rel_type = 0;
- int rel_code = 0;
- __be32 rel_info = 0;
- __u32 n = 0;
- __be16 flags;
- int grehlen = (iph->ihl<<2) + 4;
- struct sk_buff *skb2;
- struct flowi fl;
- struct rtable *rt;
-
- if (p[1] != htons(ETH_P_IP))
- return;
-
- flags = p[0];
- if (flags&(GRE_CSUM|GRE_KEY|GRE_SEQ|GRE_ROUTING|GRE_VERSION)) {
- if (flags&(GRE_VERSION|GRE_ROUTING))
- return;
- if (flags&GRE_CSUM)
- grehlen += 4;
- if (flags&GRE_KEY)
- grehlen += 4;
- if (flags&GRE_SEQ)
- grehlen += 4;
- }
- if (len < grehlen + sizeof(struct iphdr))
- return;
- eiph = (struct iphdr*)(dp + grehlen);
-
- switch (type) {
- default:
- return;
- case ICMP_PARAMETERPROB:
- n = ntohl(icmp_hdr(skb)->un.gateway) >> 24;
- if (n < (iph->ihl<<2))
- return;
-
- /* So... This guy found something strange INSIDE encapsulated
- packet. Well, he is fool, but what can we do ?
- */
- rel_type = ICMP_PARAMETERPROB;
- n -= grehlen;
- rel_info = htonl(n << 24);
- break;
-
- case ICMP_DEST_UNREACH:
- switch (code) {
- case ICMP_SR_FAILED:
- case ICMP_PORT_UNREACH:
- /* Impossible event. */
- return;
- case ICMP_FRAG_NEEDED:
- /* And it is the only really necessary thing :-) */
- n = ntohs(icmp_hdr(skb)->un.frag.mtu);
- if (n < grehlen+68)
- return;
- n -= grehlen;
- /* BSD 4.2 MORE DOES NOT EXIST IN NATURE. */
- if (n > ntohs(eiph->tot_len))
- return;
- rel_info = htonl(n);
- break;
- default:
- /* All others are translated to HOST_UNREACH.
- rfc2003 contains "deep thoughts" about NET_UNREACH,
- I believe, it is just ether pollution. --ANK
- */
- rel_type = ICMP_DEST_UNREACH;
- rel_code = ICMP_HOST_UNREACH;
- break;
- }
- break;
- case ICMP_TIME_EXCEEDED:
- if (code != ICMP_EXC_TTL)
- return;
- break;
- }
-
- /* Prepare fake skb to feed it to icmp_send */
- skb2 = skb_clone(skb, GFP_ATOMIC);
- if (skb2 == NULL)
- return;
- dst_release(skb2->dst);
- skb2->dst = NULL;
- skb_pull(skb2, skb->data - (u8*)eiph);
- skb_reset_network_header(skb2);
-
- /* Try to guess incoming interface */
- memset(&fl, 0, sizeof(fl));
- fl.fl4_dst = eiph->saddr;
- fl.fl4_tos = RT_TOS(eiph->tos);
- fl.proto = IPPROTO_GRE;
- if (ip_route_output_key(dev_net(skb->dev), &rt, &fl)) {
- kfree_skb(skb2);
- return;
- }
- skb2->dev = rt->u.dst.dev;
-
- /* route "incoming" packet */
- if (rt->rt_flags&RTCF_LOCAL) {
- ip_rt_put(rt);
- rt = NULL;
- fl.fl4_dst = eiph->daddr;
- fl.fl4_src = eiph->saddr;
- fl.fl4_tos = eiph->tos;
- if (ip_route_output_key(dev_net(skb->dev), &rt, &fl) ||
- rt->u.dst.dev->type != ARPHRD_IPGRE) {
- ip_rt_put(rt);
- kfree_skb(skb2);
- return;
- }
- } else {
- ip_rt_put(rt);
- if (ip_route_input(skb2, eiph->daddr, eiph->saddr, eiph->tos, skb2->dev) ||
- skb2->dst->dev->type != ARPHRD_IPGRE) {
- kfree_skb(skb2);
- return;
- }
- }
-
- /* change mtu on this route */
- if (type == ICMP_DEST_UNREACH && code == ICMP_FRAG_NEEDED) {
- if (n > dst_mtu(skb2->dst)) {
- kfree_skb(skb2);
- return;
- }
- skb2->dst->ops->update_pmtu(skb2->dst, n);
- } else if (type == ICMP_TIME_EXCEEDED) {
- struct ip_tunnel *t = netdev_priv(skb2->dev);
- if (t->parms.iph.ttl) {
- rel_type = ICMP_DEST_UNREACH;
- rel_code = ICMP_HOST_UNREACH;
- }
- }
-
- icmp_send(skb2, rel_type, rel_code, rel_info);
- kfree_skb(skb2);
-#endif
}
static inline void ipgre_ecn_decapsulate(struct iphdr *iph, struct sk_buff *skb)
diff --git a/net/ipv4/ipconfig.c b/net/ipv4/ipconfig.c
index 89dee43..ed45037 100644
--- a/net/ipv4/ipconfig.c
+++ b/net/ipv4/ipconfig.c
@@ -710,14 +710,14 @@
struct net_device *dev = d->dev;
struct sk_buff *skb;
struct bootp_pkt *b;
- int hh_len = LL_RESERVED_SPACE(dev);
struct iphdr *h;
/* Allocate packet */
- skb = alloc_skb(sizeof(struct bootp_pkt) + hh_len + 15, GFP_KERNEL);
+ skb = alloc_skb(sizeof(struct bootp_pkt) + LL_ALLOCATED_SPACE(dev) + 15,
+ GFP_KERNEL);
if (!skb)
return;
- skb_reserve(skb, hh_len);
+ skb_reserve(skb, LL_RESERVED_SPACE(dev));
b = (struct bootp_pkt *) skb_put(skb, sizeof(struct bootp_pkt));
memset(b, 0, sizeof(struct bootp_pkt));
diff --git a/net/ipv4/ipip.c b/net/ipv4/ipip.c
index 149111f..af5cb53 100644
--- a/net/ipv4/ipip.c
+++ b/net/ipv4/ipip.c
@@ -278,9 +278,8 @@
static int ipip_err(struct sk_buff *skb, u32 info)
{
-#ifndef I_WISH_WORLD_WERE_PERFECT
-/* It is not :-( All the routers (except for Linux) return only
+/* All the routers (except for Linux) return only
8 bytes of packet payload. It means, that precise relaying of
ICMP in the real Internet is absolutely infeasible.
*/
@@ -337,133 +336,6 @@
out:
read_unlock(&ipip_lock);
return err;
-#else
- struct iphdr *iph = (struct iphdr*)dp;
- int hlen = iph->ihl<<2;
- struct iphdr *eiph;
- const int type = icmp_hdr(skb)->type;
- const int code = icmp_hdr(skb)->code;
- int rel_type = 0;
- int rel_code = 0;
- __be32 rel_info = 0;
- __u32 n = 0;
- struct sk_buff *skb2;
- struct flowi fl;
- struct rtable *rt;
-
- if (len < hlen + sizeof(struct iphdr))
- return 0;
- eiph = (struct iphdr*)(dp + hlen);
-
- switch (type) {
- default:
- return 0;
- case ICMP_PARAMETERPROB:
- n = ntohl(icmp_hdr(skb)->un.gateway) >> 24;
- if (n < hlen)
- return 0;
-
- /* So... This guy found something strange INSIDE encapsulated
- packet. Well, he is fool, but what can we do ?
- */
- rel_type = ICMP_PARAMETERPROB;
- rel_info = htonl((n - hlen) << 24);
- break;
-
- case ICMP_DEST_UNREACH:
- switch (code) {
- case ICMP_SR_FAILED:
- case ICMP_PORT_UNREACH:
- /* Impossible event. */
- return 0;
- case ICMP_FRAG_NEEDED:
- /* And it is the only really necessary thing :-) */
- n = ntohs(icmp_hdr(skb)->un.frag.mtu);
- if (n < hlen+68)
- return 0;
- n -= hlen;
- /* BSD 4.2 MORE DOES NOT EXIST IN NATURE. */
- if (n > ntohs(eiph->tot_len))
- return 0;
- rel_info = htonl(n);
- break;
- default:
- /* All others are translated to HOST_UNREACH.
- rfc2003 contains "deep thoughts" about NET_UNREACH,
- I believe, it is just ether pollution. --ANK
- */
- rel_type = ICMP_DEST_UNREACH;
- rel_code = ICMP_HOST_UNREACH;
- break;
- }
- break;
- case ICMP_TIME_EXCEEDED:
- if (code != ICMP_EXC_TTL)
- return 0;
- break;
- }
-
- /* Prepare fake skb to feed it to icmp_send */
- skb2 = skb_clone(skb, GFP_ATOMIC);
- if (skb2 == NULL)
- return 0;
- dst_release(skb2->dst);
- skb2->dst = NULL;
- skb_pull(skb2, skb->data - (u8*)eiph);
- skb_reset_network_header(skb2);
-
- /* Try to guess incoming interface */
- memset(&fl, 0, sizeof(fl));
- fl.fl4_daddr = eiph->saddr;
- fl.fl4_tos = RT_TOS(eiph->tos);
- fl.proto = IPPROTO_IPIP;
- if (ip_route_output_key(dev_net(skb->dev), &rt, &key)) {
- kfree_skb(skb2);
- return 0;
- }
- skb2->dev = rt->u.dst.dev;
-
- /* route "incoming" packet */
- if (rt->rt_flags&RTCF_LOCAL) {
- ip_rt_put(rt);
- rt = NULL;
- fl.fl4_daddr = eiph->daddr;
- fl.fl4_src = eiph->saddr;
- fl.fl4_tos = eiph->tos;
- if (ip_route_output_key(dev_net(skb->dev), &rt, &fl) ||
- rt->u.dst.dev->type != ARPHRD_TUNNEL) {
- ip_rt_put(rt);
- kfree_skb(skb2);
- return 0;
- }
- } else {
- ip_rt_put(rt);
- if (ip_route_input(skb2, eiph->daddr, eiph->saddr, eiph->tos, skb2->dev) ||
- skb2->dst->dev->type != ARPHRD_TUNNEL) {
- kfree_skb(skb2);
- return 0;
- }
- }
-
- /* change mtu on this route */
- if (type == ICMP_DEST_UNREACH && code == ICMP_FRAG_NEEDED) {
- if (n > dst_mtu(skb2->dst)) {
- kfree_skb(skb2);
- return 0;
- }
- skb2->dst->ops->update_pmtu(skb2->dst, n);
- } else if (type == ICMP_TIME_EXCEEDED) {
- struct ip_tunnel *t = netdev_priv(skb2->dev);
- if (t->parms.iph.ttl) {
- rel_type = ICMP_DEST_UNREACH;
- rel_code = ICMP_HOST_UNREACH;
- }
- }
-
- icmp_send(skb2, rel_type, rel_code, rel_info);
- kfree_skb(skb2);
- return 0;
-#endif
}
static inline void ipip_ecn_decapsulate(const struct iphdr *outer_iph,
diff --git a/net/ipv4/netfilter/nf_nat_snmp_basic.c b/net/ipv4/netfilter/nf_nat_snmp_basic.c
index 5daefad..7750c97 100644
--- a/net/ipv4/netfilter/nf_nat_snmp_basic.c
+++ b/net/ipv4/netfilter/nf_nat_snmp_basic.c
@@ -232,6 +232,11 @@
}
}
}
+
+ /* don't trust len bigger than ctx buffer */
+ if (*len > ctx->end - ctx->pointer)
+ return 0;
+
return 1;
}
@@ -250,6 +255,10 @@
if (!asn1_length_decode(ctx, &def, &len))
return 0;
+ /* primitive shall be definite, indefinite shall be constructed */
+ if (*con == ASN1_PRI && !def)
+ return 0;
+
if (def)
*eoc = ctx->pointer + len;
else
@@ -434,6 +443,11 @@
unsigned long *optr;
size = eoc - ctx->pointer + 1;
+
+ /* first subid actually encodes first two subids */
+ if (size < 2 || size > ULONG_MAX/sizeof(unsigned long))
+ return 0;
+
*oid = kmalloc(size * sizeof(unsigned long), GFP_ATOMIC);
if (*oid == NULL) {
if (net_ratelimit())
diff --git a/net/ipv4/raw.c b/net/ipv4/raw.c
index 11d7f75..e7e091d 100644
--- a/net/ipv4/raw.c
+++ b/net/ipv4/raw.c
@@ -322,7 +322,6 @@
unsigned int flags)
{
struct inet_sock *inet = inet_sk(sk);
- int hh_len;
struct iphdr *iph;
struct sk_buff *skb;
unsigned int iphlen;
@@ -336,13 +335,12 @@
if (flags&MSG_PROBE)
goto out;
- hh_len = LL_RESERVED_SPACE(rt->u.dst.dev);
-
- skb = sock_alloc_send_skb(sk, length+hh_len+15,
- flags&MSG_DONTWAIT, &err);
+ skb = sock_alloc_send_skb(sk,
+ length + LL_ALLOCATED_SPACE(rt->u.dst.dev) + 15,
+ flags & MSG_DONTWAIT, &err);
if (skb == NULL)
goto error;
- skb_reserve(skb, hh_len);
+ skb_reserve(skb, LL_RESERVED_SPACE(rt->u.dst.dev));
skb->priority = sk->sk_priority;
skb->mark = sk->sk_mark;
@@ -610,6 +608,14 @@
sk_common_release(sk);
}
+static int raw_destroy(struct sock *sk)
+{
+ lock_sock(sk);
+ ip_flush_pending_frames(sk);
+ release_sock(sk);
+ return 0;
+}
+
/* This gets rid of all the nasties in af_inet. -DaveM */
static int raw_bind(struct sock *sk, struct sockaddr *uaddr, int addr_len)
{
@@ -822,6 +828,7 @@
.name = "RAW",
.owner = THIS_MODULE,
.close = raw_close,
+ .destroy = raw_destroy,
.connect = ip4_datagram_connect,
.disconnect = udp_disconnect,
.ioctl = raw_ioctl,
diff --git a/net/ipv4/route.c b/net/ipv4/route.c
index 92f90ae..96be336 100644
--- a/net/ipv4/route.c
+++ b/net/ipv4/route.c
@@ -160,7 +160,7 @@
.negative_advice = ipv4_negative_advice,
.link_failure = ipv4_link_failure,
.update_pmtu = ip_rt_update_pmtu,
- .local_out = ip_local_out,
+ .local_out = __ip_local_out,
.entry_size = sizeof(struct rtable),
.entries = ATOMIC_INIT(0),
};
@@ -1792,7 +1792,7 @@
if (err)
flags |= RTCF_DIRECTSRC;
- if (out_dev == in_dev && err && !(flags & RTCF_MASQ) &&
+ if (out_dev == in_dev && err &&
(IN_DEV_SHARED_MEDIA(out_dev) ||
inet_addr_onlink(out_dev, saddr, FIB_RES_GW(*res))))
flags |= RTCF_DOREDIRECT;
diff --git a/net/ipv4/syncookies.c b/net/ipv4/syncookies.c
index 73ba989..d182a2a 100644
--- a/net/ipv4/syncookies.c
+++ b/net/ipv4/syncookies.c
@@ -285,7 +285,7 @@
cookie_check_timestamp(&tcp_opt);
ret = NULL;
- req = reqsk_alloc(&tcp_request_sock_ops); /* for safety */
+ req = inet_reqsk_alloc(&tcp_request_sock_ops); /* for safety */
if (!req)
goto out;
@@ -301,7 +301,6 @@
ireq->rmt_port = th->source;
ireq->loc_addr = ip_hdr(skb)->daddr;
ireq->rmt_addr = ip_hdr(skb)->saddr;
- ireq->opt = NULL;
ireq->snd_wscale = tcp_opt.snd_wscale;
ireq->rcv_wscale = tcp_opt.rcv_wscale;
ireq->sack_ok = tcp_opt.sack_ok;
diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
index f886531..fc54a48 100644
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -1227,7 +1227,14 @@
copied += used;
offset += used;
}
- if (offset != skb->len)
+ /*
+ * If recv_actor drops the lock (e.g. TCP splice
+ * receive) the skb pointer might be invalid when
+ * getting here: tcp_collapse might have deleted it
+ * while aggregating skbs from the socket queue.
+ */
+ skb = tcp_recv_skb(sk, seq-1, &offset);
+ if (!skb || (offset+1 != skb->len))
break;
}
if (tcp_hdr(skb)->fin) {
@@ -2105,12 +2112,15 @@
break;
case TCP_DEFER_ACCEPT:
- if (val < 0) {
- err = -EINVAL;
- } else {
- if (val > MAX_TCP_ACCEPT_DEFERRED)
- val = MAX_TCP_ACCEPT_DEFERRED;
- icsk->icsk_accept_queue.rskq_defer_accept = val;
+ icsk->icsk_accept_queue.rskq_defer_accept = 0;
+ if (val > 0) {
+ /* Translate value in seconds to number of
+ * retransmits */
+ while (icsk->icsk_accept_queue.rskq_defer_accept < 32 &&
+ val > ((TCP_TIMEOUT_INIT / HZ) <<
+ icsk->icsk_accept_queue.rskq_defer_accept))
+ icsk->icsk_accept_queue.rskq_defer_accept++;
+ icsk->icsk_accept_queue.rskq_defer_accept++;
}
break;
@@ -2292,7 +2302,8 @@
val = (val ? : sysctl_tcp_fin_timeout) / HZ;
break;
case TCP_DEFER_ACCEPT:
- val = icsk->icsk_accept_queue.rskq_defer_accept;
+ val = !icsk->icsk_accept_queue.rskq_defer_accept ? 0 :
+ ((TCP_TIMEOUT_INIT / HZ) << (icsk->icsk_accept_queue.rskq_defer_accept - 1));
break;
case TCP_WINDOW_CLAMP:
val = tp->window_clamp;
diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c
index 26c9369..cad73b7 100644
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -1392,9 +1392,9 @@
if (before(next_dup->start_seq, skip_to_seq)) {
skb = tcp_sacktag_skip(skb, sk, next_dup->start_seq, fack_count);
- tcp_sacktag_walk(skb, sk, NULL,
- next_dup->start_seq, next_dup->end_seq,
- 1, fack_count, reord, flag);
+ skb = tcp_sacktag_walk(skb, sk, NULL,
+ next_dup->start_seq, next_dup->end_seq,
+ 1, fack_count, reord, flag);
}
return skb;
@@ -1842,9 +1842,16 @@
TCP_SKB_CB(skb)->sacked &= ~TCPCB_SACKED_RETRANS;
}
- /* Don't lost mark skbs that were fwd transmitted after RTO */
- if (!(TCP_SKB_CB(skb)->sacked & TCPCB_SACKED_ACKED) &&
- !after(TCP_SKB_CB(skb)->end_seq, tp->frto_highmark)) {
+ /* Marking forward transmissions that were made after RTO lost
+ * can cause unnecessary retransmissions in some scenarios,
+ * SACK blocks will mitigate that in some but not in all cases.
+ * We used to not mark them but it was causing break-ups with
+ * receivers that do only in-order receival.
+ *
+ * TODO: we could detect presence of such receiver and select
+ * different behavior per flow.
+ */
+ if (!(TCP_SKB_CB(skb)->sacked & TCPCB_SACKED_ACKED)) {
TCP_SKB_CB(skb)->sacked |= TCPCB_LOST;
tp->lost_out += tcp_skb_pcount(skb);
}
@@ -1860,7 +1867,7 @@
tp->reordering = min_t(unsigned int, tp->reordering,
sysctl_tcp_reordering);
tcp_set_ca_state(sk, TCP_CA_Loss);
- tp->high_seq = tp->frto_highmark;
+ tp->high_seq = tp->snd_nxt;
TCP_ECN_queue_cwr(tp);
tcp_clear_retrans_hints_partial(tp);
@@ -2476,28 +2483,34 @@
tcp_ca_event(sk, CA_EVENT_COMPLETE_CWR);
}
+static void tcp_try_keep_open(struct sock *sk)
+{
+ struct tcp_sock *tp = tcp_sk(sk);
+ int state = TCP_CA_Open;
+
+ if (tcp_left_out(tp) || tp->retrans_out || tp->undo_marker)
+ state = TCP_CA_Disorder;
+
+ if (inet_csk(sk)->icsk_ca_state != state) {
+ tcp_set_ca_state(sk, state);
+ tp->high_seq = tp->snd_nxt;
+ }
+}
+
static void tcp_try_to_open(struct sock *sk, int flag)
{
struct tcp_sock *tp = tcp_sk(sk);
tcp_verify_left_out(tp);
- if (tp->retrans_out == 0)
+ if (!tp->frto_counter && tp->retrans_out == 0)
tp->retrans_stamp = 0;
if (flag & FLAG_ECE)
tcp_enter_cwr(sk, 1);
if (inet_csk(sk)->icsk_ca_state != TCP_CA_CWR) {
- int state = TCP_CA_Open;
-
- if (tcp_left_out(tp) || tp->retrans_out || tp->undo_marker)
- state = TCP_CA_Disorder;
-
- if (inet_csk(sk)->icsk_ca_state != state) {
- tcp_set_ca_state(sk, state);
- tp->high_seq = tp->snd_nxt;
- }
+ tcp_try_keep_open(sk);
tcp_moderate_cwnd(tp);
} else {
tcp_cwnd_down(sk, flag);
@@ -3303,8 +3316,11 @@
return 1;
old_ack:
- if (TCP_SKB_CB(skb)->sacked)
+ if (TCP_SKB_CB(skb)->sacked) {
tcp_sacktag_write_queue(sk, skb, prior_snd_una);
+ if (icsk->icsk_ca_state == TCP_CA_Open)
+ tcp_try_keep_open(sk);
+ }
uninteresting_ack:
SOCK_DEBUG(sk, "Ack %u out of %u:%u\n", ack, tp->snd_una, tp->snd_nxt);
@@ -4525,49 +4541,6 @@
}
}
-static int tcp_defer_accept_check(struct sock *sk)
-{
- struct tcp_sock *tp = tcp_sk(sk);
-
- if (tp->defer_tcp_accept.request) {
- int queued_data = tp->rcv_nxt - tp->copied_seq;
- int hasfin = !skb_queue_empty(&sk->sk_receive_queue) ?
- tcp_hdr((struct sk_buff *)
- sk->sk_receive_queue.prev)->fin : 0;
-
- if (queued_data && hasfin)
- queued_data--;
-
- if (queued_data &&
- tp->defer_tcp_accept.listen_sk->sk_state == TCP_LISTEN) {
- if (sock_flag(sk, SOCK_KEEPOPEN)) {
- inet_csk_reset_keepalive_timer(sk,
- keepalive_time_when(tp));
- } else {
- inet_csk_delete_keepalive_timer(sk);
- }
-
- inet_csk_reqsk_queue_add(
- tp->defer_tcp_accept.listen_sk,
- tp->defer_tcp_accept.request,
- sk);
-
- tp->defer_tcp_accept.listen_sk->sk_data_ready(
- tp->defer_tcp_accept.listen_sk, 0);
-
- sock_put(tp->defer_tcp_accept.listen_sk);
- sock_put(sk);
- tp->defer_tcp_accept.listen_sk = NULL;
- tp->defer_tcp_accept.request = NULL;
- } else if (hasfin ||
- tp->defer_tcp_accept.listen_sk->sk_state != TCP_LISTEN) {
- tcp_reset(sk);
- return -1;
- }
- }
- return 0;
-}
-
static int tcp_copy_to_iovec(struct sock *sk, struct sk_buff *skb, int hlen)
{
struct tcp_sock *tp = tcp_sk(sk);
@@ -4928,8 +4901,6 @@
tcp_data_snd_check(sk);
tcp_ack_snd_check(sk);
-
- tcp_defer_accept_check(sk);
return 0;
csum_error:
diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c
index cd601a8..97a2300 100644
--- a/net/ipv4/tcp_ipv4.c
+++ b/net/ipv4/tcp_ipv4.c
@@ -1285,7 +1285,7 @@
if (sk_acceptq_is_full(sk) && inet_csk_reqsk_queue_young(sk) > 1)
goto drop;
- req = reqsk_alloc(&tcp_request_sock_ops);
+ req = inet_reqsk_alloc(&tcp_request_sock_ops);
if (!req)
goto drop;
@@ -1918,14 +1918,6 @@
sk->sk_sndmsg_page = NULL;
}
- if (tp->defer_tcp_accept.request) {
- reqsk_free(tp->defer_tcp_accept.request);
- sock_put(tp->defer_tcp_accept.listen_sk);
- sock_put(sk);
- tp->defer_tcp_accept.listen_sk = NULL;
- tp->defer_tcp_accept.request = NULL;
- }
-
atomic_dec(&tcp_sockets_allocated);
return 0;
diff --git a/net/ipv4/tcp_minisocks.c b/net/ipv4/tcp_minisocks.c
index 019c8c1..8245247 100644
--- a/net/ipv4/tcp_minisocks.c
+++ b/net/ipv4/tcp_minisocks.c
@@ -571,8 +571,10 @@
does sequence test, SYN is truncated, and thus we consider
it a bare ACK.
- Both ends (listening sockets) accept the new incoming
- connection and try to talk to each other. 8-)
+ If icsk->icsk_accept_queue.rskq_defer_accept, we silently drop this
+ bare ACK. Otherwise, we create an established connection. Both
+ ends (listening sockets) accept the new incoming connection and try
+ to talk to each other. 8-)
Note: This case is both harmless, and rare. Possibility is about the
same as us discovering intelligent life on another plant tomorrow.
@@ -640,6 +642,13 @@
if (!(flg & TCP_FLAG_ACK))
return NULL;
+ /* If TCP_DEFER_ACCEPT is set, drop bare ACK. */
+ if (inet_csk(sk)->icsk_accept_queue.rskq_defer_accept &&
+ TCP_SKB_CB(skb)->end_seq == tcp_rsk(req)->rcv_isn + 1) {
+ inet_rsk(req)->acked = 1;
+ return NULL;
+ }
+
/* OK, ACK is valid, create big socket and
* feed this segment to it. It will repeat all
* the tests. THIS SEGMENT MUST MOVE SOCKET TO
@@ -678,24 +687,7 @@
inet_csk_reqsk_queue_unlink(sk, req, prev);
inet_csk_reqsk_queue_removed(sk, req);
- if (inet_csk(sk)->icsk_accept_queue.rskq_defer_accept &&
- TCP_SKB_CB(skb)->end_seq == tcp_rsk(req)->rcv_isn + 1) {
-
- /* the accept queue handling is done is est recv slow
- * path so lets make sure to start there
- */
- tcp_sk(child)->pred_flags = 0;
- sock_hold(sk);
- sock_hold(child);
- tcp_sk(child)->defer_tcp_accept.listen_sk = sk;
- tcp_sk(child)->defer_tcp_accept.request = req;
-
- inet_csk_reset_keepalive_timer(child,
- inet_csk(sk)->icsk_accept_queue.rskq_defer_accept * HZ);
- } else {
- inet_csk_reqsk_queue_add(sk, req, child);
- }
-
+ inet_csk_reqsk_queue_add(sk, req, child);
return child;
listen_overflow:
diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c
index debf235..ad993ec 100644
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -1836,7 +1836,7 @@
{
struct tcp_sock *tp = tcp_sk(sk);
struct inet_connection_sock *icsk = inet_csk(sk);
- unsigned int cur_mss = tcp_current_mss(sk, 0);
+ unsigned int cur_mss;
int err;
/* Inconslusive MTU probe */
@@ -1858,6 +1858,11 @@
return -ENOMEM;
}
+ if (inet_csk(sk)->icsk_af_ops->rebuild_header(sk))
+ return -EHOSTUNREACH; /* Routing failure or similar. */
+
+ cur_mss = tcp_current_mss(sk, 0);
+
/* If receiver has shrunk his window, and skb is out of
* new window, do not retransmit it. The exception is the
* case, when window is shrunk to zero. In this case
@@ -1884,9 +1889,6 @@
(sysctl_tcp_retrans_collapse != 0))
tcp_retrans_try_collapse(sk, skb, cur_mss);
- if (inet_csk(sk)->icsk_af_ops->rebuild_header(sk))
- return -EHOSTUNREACH; /* Routing failure or similar. */
-
/* Some Solaris stacks overoptimize and ignore the FIN on a
* retransmit when old data is attached. So strip it off
* since it is cheap to do so and saves bytes on the network.
@@ -2129,6 +2131,8 @@
TCP_SKB_CB(skb)->when = tcp_time_stamp;
if (tcp_transmit_skb(sk, skb, 0, priority))
NET_INC_STATS(LINUX_MIB_TCPABORTFAILED);
+
+ TCP_INC_STATS(TCP_MIB_OUTRSTS);
}
/* WARNING: This routine must only be called when we have already sent
diff --git a/net/ipv4/tcp_timer.c b/net/ipv4/tcp_timer.c
index 4de68cf..63ed9d6 100644
--- a/net/ipv4/tcp_timer.c
+++ b/net/ipv4/tcp_timer.c
@@ -489,11 +489,6 @@
goto death;
}
- if (tp->defer_tcp_accept.request && sk->sk_state == TCP_ESTABLISHED) {
- tcp_send_active_reset(sk, GFP_ATOMIC);
- goto death;
- }
-
if (!sock_flag(sk, SOCK_KEEPOPEN) || sk->sk_state == TCP_CLOSE)
goto out;
diff --git a/net/ipv4/tunnel4.c b/net/ipv4/tunnel4.c
index d3b709a..cb1f0e8 100644
--- a/net/ipv4/tunnel4.c
+++ b/net/ipv4/tunnel4.c
@@ -97,7 +97,7 @@
{
struct xfrm_tunnel *handler;
- if (!pskb_may_pull(skb, sizeof(struct iphdr)))
+ if (!pskb_may_pull(skb, sizeof(struct ipv6hdr)))
goto drop;
for (handler = tunnel64_handlers; handler; handler = handler->next)
diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c
index db1cb7c..56fcda3 100644
--- a/net/ipv4/udp.c
+++ b/net/ipv4/udp.c
@@ -420,7 +420,7 @@
/*
* Throw away all pending data and cancel the corking. Socket is locked.
*/
-static void udp_flush_pending_frames(struct sock *sk)
+void udp_flush_pending_frames(struct sock *sk)
{
struct udp_sock *up = udp_sk(sk);
@@ -430,6 +430,7 @@
ip_flush_pending_frames(sk);
}
}
+EXPORT_SYMBOL(udp_flush_pending_frames);
/**
* udp4_hwcsum_outgoing - handle outgoing HW checksumming
diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index e591e09..147588f 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -731,8 +731,13 @@
onlink = -1;
spin_lock(&ifa->lock);
- lifetime = min_t(unsigned long,
- ifa->valid_lft, 0x7fffffffUL/HZ);
+
+ lifetime = addrconf_timeout_fixup(ifa->valid_lft, HZ);
+ /*
+ * Note: Because this address is
+ * not permanent, lifetime <
+ * LONG_MAX / HZ here.
+ */
if (time_before(expires,
ifa->tstamp + lifetime * HZ))
expires = ifa->tstamp + lifetime * HZ;
@@ -1722,7 +1727,6 @@
__u32 valid_lft;
__u32 prefered_lft;
int addr_type;
- unsigned long rt_expires;
struct inet6_dev *in6_dev;
pinfo = (struct prefix_info *) opt;
@@ -1764,41 +1768,49 @@
* 2) Configure prefixes with the auto flag set
*/
- /* Avoid arithmetic overflow. Really, we could
- save rt_expires in seconds, likely valid_lft,
- but it would require division in fib gc, that it
- not good.
- */
- if (valid_lft >= 0x7FFFFFFF/HZ)
- rt_expires = 0x7FFFFFFF - (0x7FFFFFFF % HZ);
- else
- rt_expires = valid_lft * HZ;
-
- /*
- * We convert this (in jiffies) to clock_t later.
- * Avoid arithmetic overflow there as well.
- * Overflow can happen only if HZ < USER_HZ.
- */
- if (HZ < USER_HZ && rt_expires > 0x7FFFFFFF / USER_HZ)
- rt_expires = 0x7FFFFFFF / USER_HZ;
-
if (pinfo->onlink) {
struct rt6_info *rt;
+ unsigned long rt_expires;
+
+ /* Avoid arithmetic overflow. Really, we could
+ * save rt_expires in seconds, likely valid_lft,
+ * but it would require division in fib gc, that it
+ * not good.
+ */
+ if (HZ > USER_HZ)
+ rt_expires = addrconf_timeout_fixup(valid_lft, HZ);
+ else
+ rt_expires = addrconf_timeout_fixup(valid_lft, USER_HZ);
+
+ if (addrconf_finite_timeout(rt_expires))
+ rt_expires *= HZ;
+
rt = rt6_lookup(dev_net(dev), &pinfo->prefix, NULL,
dev->ifindex, 1);
if (rt && ((rt->rt6i_flags & (RTF_GATEWAY | RTF_DEFAULT)) == 0)) {
- if (rt->rt6i_flags&RTF_EXPIRES) {
- if (valid_lft == 0) {
- ip6_del_rt(rt);
- rt = NULL;
- } else {
- rt->rt6i_expires = jiffies + rt_expires;
- }
+ /* Autoconf prefix route */
+ if (valid_lft == 0) {
+ ip6_del_rt(rt);
+ rt = NULL;
+ } else if (addrconf_finite_timeout(rt_expires)) {
+ /* not infinity */
+ rt->rt6i_expires = jiffies + rt_expires;
+ rt->rt6i_flags |= RTF_EXPIRES;
+ } else {
+ rt->rt6i_flags &= ~RTF_EXPIRES;
+ rt->rt6i_expires = 0;
}
} else if (valid_lft) {
+ clock_t expires = 0;
+ int flags = RTF_ADDRCONF | RTF_PREFIX_RT;
+ if (addrconf_finite_timeout(rt_expires)) {
+ /* not infinity */
+ flags |= RTF_EXPIRES;
+ expires = jiffies_to_clock_t(rt_expires);
+ }
addrconf_prefix_route(&pinfo->prefix, pinfo->prefix_len,
- dev, jiffies_to_clock_t(rt_expires), RTF_ADDRCONF|RTF_EXPIRES|RTF_PREFIX_RT);
+ dev, expires, flags);
}
if (rt)
dst_release(&rt->u.dst);
@@ -2014,17 +2026,22 @@
* Manual configuration of address on an interface
*/
static int inet6_addr_add(struct net *net, int ifindex, struct in6_addr *pfx,
- int plen, __u8 ifa_flags, __u32 prefered_lft,
+ unsigned int plen, __u8 ifa_flags, __u32 prefered_lft,
__u32 valid_lft)
{
struct inet6_ifaddr *ifp;
struct inet6_dev *idev;
struct net_device *dev;
int scope;
- u32 flags = RTF_EXPIRES;
+ u32 flags;
+ clock_t expires;
+ unsigned long timeout;
ASSERT_RTNL();
+ if (plen > 128)
+ return -EINVAL;
+
/* check the lifetime */
if (!valid_lft || prefered_lft > valid_lft)
return -EINVAL;
@@ -2038,17 +2055,23 @@
scope = ipv6_addr_scope(pfx);
- if (valid_lft == INFINITY_LIFE_TIME) {
- ifa_flags |= IFA_F_PERMANENT;
+ timeout = addrconf_timeout_fixup(valid_lft, HZ);
+ if (addrconf_finite_timeout(timeout)) {
+ expires = jiffies_to_clock_t(timeout * HZ);
+ valid_lft = timeout;
+ flags = RTF_EXPIRES;
+ } else {
+ expires = 0;
flags = 0;
- } else if (valid_lft >= 0x7FFFFFFF/HZ)
- valid_lft = 0x7FFFFFFF/HZ;
+ ifa_flags |= IFA_F_PERMANENT;
+ }
- if (prefered_lft == 0)
- ifa_flags |= IFA_F_DEPRECATED;
- else if ((prefered_lft >= 0x7FFFFFFF/HZ) &&
- (prefered_lft != INFINITY_LIFE_TIME))
- prefered_lft = 0x7FFFFFFF/HZ;
+ timeout = addrconf_timeout_fixup(prefered_lft, HZ);
+ if (addrconf_finite_timeout(timeout)) {
+ if (timeout == 0)
+ ifa_flags |= IFA_F_DEPRECATED;
+ prefered_lft = timeout;
+ }
ifp = ipv6_add_addr(idev, pfx, plen, scope, ifa_flags);
@@ -2060,7 +2083,7 @@
spin_unlock_bh(&ifp->lock);
addrconf_prefix_route(&ifp->addr, ifp->prefix_len, dev,
- jiffies_to_clock_t(valid_lft * HZ), flags);
+ expires, flags);
/*
* Note that section 3.1 of RFC 4429 indicates
* that the Optimistic flag should not be set for
@@ -2076,12 +2099,15 @@
}
static int inet6_addr_del(struct net *net, int ifindex, struct in6_addr *pfx,
- int plen)
+ unsigned int plen)
{
struct inet6_ifaddr *ifp;
struct inet6_dev *idev;
struct net_device *dev;
+ if (plen > 128)
+ return -EINVAL;
+
dev = __dev_get_by_index(net, ifindex);
if (!dev)
return -ENODEV;
@@ -3148,22 +3174,30 @@
static int inet6_addr_modify(struct inet6_ifaddr *ifp, u8 ifa_flags,
u32 prefered_lft, u32 valid_lft)
{
- u32 flags = RTF_EXPIRES;
+ u32 flags;
+ clock_t expires;
+ unsigned long timeout;
if (!valid_lft || (prefered_lft > valid_lft))
return -EINVAL;
- if (valid_lft == INFINITY_LIFE_TIME) {
- ifa_flags |= IFA_F_PERMANENT;
+ timeout = addrconf_timeout_fixup(valid_lft, HZ);
+ if (addrconf_finite_timeout(timeout)) {
+ expires = jiffies_to_clock_t(timeout * HZ);
+ valid_lft = timeout;
+ flags = RTF_EXPIRES;
+ } else {
+ expires = 0;
flags = 0;
- } else if (valid_lft >= 0x7FFFFFFF/HZ)
- valid_lft = 0x7FFFFFFF/HZ;
+ ifa_flags |= IFA_F_PERMANENT;
+ }
- if (prefered_lft == 0)
- ifa_flags |= IFA_F_DEPRECATED;
- else if ((prefered_lft >= 0x7FFFFFFF/HZ) &&
- (prefered_lft != INFINITY_LIFE_TIME))
- prefered_lft = 0x7FFFFFFF/HZ;
+ timeout = addrconf_timeout_fixup(prefered_lft, HZ);
+ if (addrconf_finite_timeout(timeout)) {
+ if (timeout == 0)
+ ifa_flags |= IFA_F_DEPRECATED;
+ prefered_lft = timeout;
+ }
spin_lock_bh(&ifp->lock);
ifp->flags = (ifp->flags & ~(IFA_F_DEPRECATED | IFA_F_PERMANENT | IFA_F_NODAD | IFA_F_HOMEADDRESS)) | ifa_flags;
@@ -3176,7 +3210,7 @@
ipv6_ifa_notify(0, ifp);
addrconf_prefix_route(&ifp->addr, ifp->prefix_len, ifp->idev->dev,
- jiffies_to_clock_t(valid_lft * HZ), flags);
+ expires, flags);
addrconf_verify(0);
return 0;
@@ -4242,7 +4276,7 @@
neigh_sysctl_register(idev->dev, idev->nd_parms, NET_IPV6,
NET_IPV6_NEIGH, "ipv6",
&ndisc_ifinfo_sysctl_change,
- NULL);
+ ndisc_ifinfo_sysctl_strategy);
__addrconf_sysctl_register(dev_net(idev->dev), idev->dev->name,
idev->dev->ifindex, idev, &idev->cnf);
}
diff --git a/net/ipv6/af_inet6.c b/net/ipv6/af_inet6.c
index 3c6aafb..e84b3fd 100644
--- a/net/ipv6/af_inet6.c
+++ b/net/ipv6/af_inet6.c
@@ -191,7 +191,7 @@
np->mcast_hops = -1;
np->mc_loop = 1;
np->pmtudisc = IPV6_PMTUDISC_WANT;
- np->ipv6only = init_net.ipv6.sysctl.bindv6only;
+ np->ipv6only = net->ipv6.sysctl.bindv6only;
/* Init the ipv4 part of the socket since we can have sockets
* using v6 API for ipv4.
diff --git a/net/ipv6/datagram.c b/net/ipv6/datagram.c
index 94fa6ae..0f0f94a 100644
--- a/net/ipv6/datagram.c
+++ b/net/ipv6/datagram.c
@@ -496,7 +496,8 @@
return 0;
}
-int datagram_send_ctl(struct msghdr *msg, struct flowi *fl,
+int datagram_send_ctl(struct net *net,
+ struct msghdr *msg, struct flowi *fl,
struct ipv6_txoptions *opt,
int *hlimit, int *tclass)
{
@@ -509,7 +510,6 @@
for (cmsg = CMSG_FIRSTHDR(msg); cmsg; cmsg = CMSG_NXTHDR(msg, cmsg)) {
int addr_type;
- struct net_device *dev = NULL;
if (!CMSG_OK(msg, cmsg)) {
err = -EINVAL;
@@ -522,6 +522,9 @@
switch (cmsg->cmsg_type) {
case IPV6_PKTINFO:
case IPV6_2292PKTINFO:
+ {
+ struct net_device *dev = NULL;
+
if (cmsg->cmsg_len < CMSG_LEN(sizeof(struct in6_pktinfo))) {
err = -EINVAL;
goto exit_f;
@@ -535,32 +538,32 @@
fl->oif = src_info->ipi6_ifindex;
}
- addr_type = ipv6_addr_type(&src_info->ipi6_addr);
+ addr_type = __ipv6_addr_type(&src_info->ipi6_addr);
- if (addr_type == IPV6_ADDR_ANY)
- break;
+ if (fl->oif) {
+ dev = dev_get_by_index(net, fl->oif);
+ if (!dev)
+ return -ENODEV;
+ } else if (addr_type & IPV6_ADDR_LINKLOCAL)
+ return -EINVAL;
- if (addr_type & IPV6_ADDR_LINKLOCAL) {
- if (!src_info->ipi6_ifindex)
- return -EINVAL;
- else {
- dev = dev_get_by_index(&init_net, src_info->ipi6_ifindex);
- if (!dev)
- return -ENODEV;
- }
+ if (addr_type != IPV6_ADDR_ANY) {
+ int strict = __ipv6_addr_src_scope(addr_type) <= IPV6_ADDR_SCOPE_LINKLOCAL;
+ if (!ipv6_chk_addr(net, &src_info->ipi6_addr,
+ strict ? dev : NULL, 0))
+ err = -EINVAL;
+ else
+ ipv6_addr_copy(&fl->fl6_src, &src_info->ipi6_addr);
}
- if (!ipv6_chk_addr(&init_net, &src_info->ipi6_addr,
- dev, 0)) {
- if (dev)
- dev_put(dev);
- err = -EINVAL;
- goto exit_f;
- }
+
if (dev)
dev_put(dev);
- ipv6_addr_copy(&fl->fl6_src, &src_info->ipi6_addr);
+ if (err)
+ goto exit_f;
+
break;
+ }
case IPV6_FLOWINFO:
if (cmsg->cmsg_len < CMSG_LEN(4)) {
@@ -702,6 +705,11 @@
}
*hlimit = *(int *)CMSG_DATA(cmsg);
+ if (*hlimit < -1 || *hlimit > 0xff) {
+ err = -EINVAL;
+ goto exit_f;
+ }
+
break;
case IPV6_TCLASS:
diff --git a/net/ipv6/ip6_flowlabel.c b/net/ipv6/ip6_flowlabel.c
index eb7a9403..37a4e77 100644
--- a/net/ipv6/ip6_flowlabel.c
+++ b/net/ipv6/ip6_flowlabel.c
@@ -354,7 +354,7 @@
msg.msg_control = (void*)(fl->opt+1);
flowi.oif = 0;
- err = datagram_send_ctl(&msg, &flowi, fl->opt, &junk, &junk);
+ err = datagram_send_ctl(net, &msg, &flowi, fl->opt, &junk, &junk);
if (err)
goto done;
err = -EINVAL;
diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c
index 0af2e05..48cdce9 100644
--- a/net/ipv6/ip6_output.c
+++ b/net/ipv6/ip6_output.c
@@ -780,7 +780,7 @@
* Allocate buffer.
*/
- if ((frag = alloc_skb(len+hlen+sizeof(struct frag_hdr)+LL_RESERVED_SPACE(rt->u.dst.dev), GFP_ATOMIC)) == NULL) {
+ if ((frag = alloc_skb(len+hlen+sizeof(struct frag_hdr)+LL_ALLOCATED_SPACE(rt->u.dst.dev), GFP_ATOMIC)) == NULL) {
NETDEBUG(KERN_INFO "IPv6: frag: no memory for new fragment!\n");
IP6_INC_STATS(ip6_dst_idev(skb->dst),
IPSTATS_MIB_FRAGFAILS);
diff --git a/net/ipv6/ip6mr.c b/net/ipv6/ip6mr.c
index 2de3c46..1479618 100644
--- a/net/ipv6/ip6mr.c
+++ b/net/ipv6/ip6mr.c
@@ -197,7 +197,7 @@
const char *name = vif->dev ? vif->dev->name : "none";
seq_printf(seq,
- "%2Zd %-10s %8ld %7ld %8ld %7ld %05X\n",
+ "%2td %-10s %8ld %7ld %8ld %7ld %05X\n",
vif - vif6_table,
name, vif->bytes_in, vif->pkt_in,
vif->bytes_out, vif->pkt_out,
diff --git a/net/ipv6/ipv6_sockglue.c b/net/ipv6/ipv6_sockglue.c
index 56d55fe..c042ce1 100644
--- a/net/ipv6/ipv6_sockglue.c
+++ b/net/ipv6/ipv6_sockglue.c
@@ -67,7 +67,7 @@
/* RA packet may be delivered ONLY to IPPROTO_RAW socket */
if (sk->sk_type != SOCK_RAW || inet_sk(sk)->num != IPPROTO_RAW)
- return -EINVAL;
+ return -ENOPROTOOPT;
new_ra = (sel>=0) ? kmalloc(sizeof(*new_ra), GFP_KERNEL) : NULL;
@@ -161,9 +161,17 @@
struct ipv6_txoptions *opt;
struct sk_buff *pktopt;
- if (sk->sk_protocol != IPPROTO_UDP &&
- sk->sk_protocol != IPPROTO_UDPLITE &&
- sk->sk_protocol != IPPROTO_TCP)
+ if (sk->sk_type == SOCK_RAW)
+ break;
+
+ if (sk->sk_protocol == IPPROTO_UDP ||
+ sk->sk_protocol == IPPROTO_UDPLITE) {
+ struct udp_sock *up = udp_sk(sk);
+ if (up->pending == AF_INET6) {
+ retv = -EBUSY;
+ break;
+ }
+ } else if (sk->sk_protocol != IPPROTO_TCP)
break;
if (sk->sk_state != TCP_ESTABLISHED) {
@@ -416,7 +424,7 @@
msg.msg_controllen = optlen;
msg.msg_control = (void*)(opt+1);
- retv = datagram_send_ctl(&msg, &fl, opt, &junk, &junk);
+ retv = datagram_send_ctl(net, &msg, &fl, opt, &junk, &junk);
if (retv)
goto done;
update:
@@ -438,7 +446,7 @@
case IPV6_MULTICAST_HOPS:
if (sk->sk_type == SOCK_STREAM)
- goto e_inval;
+ break;
if (optlen < sizeof(int))
goto e_inval;
if (val > 255 || val < -1)
@@ -450,13 +458,15 @@
case IPV6_MULTICAST_LOOP:
if (optlen < sizeof(int))
goto e_inval;
+ if (val != valbool)
+ goto e_inval;
np->mc_loop = valbool;
retv = 0;
break;
case IPV6_MULTICAST_IF:
if (sk->sk_type == SOCK_STREAM)
- goto e_inval;
+ break;
if (optlen < sizeof(int))
goto e_inval;
@@ -832,7 +842,7 @@
len = min_t(unsigned int, len, ipv6_optlen(hdr));
if (copy_to_user(optval, hdr, len))
return -EFAULT;
- return ipv6_optlen(hdr);
+ return len;
}
static int do_ipv6_getsockopt(struct sock *sk, int level, int optname,
@@ -852,7 +862,7 @@
if (sk->sk_protocol != IPPROTO_UDP &&
sk->sk_protocol != IPPROTO_UDPLITE &&
sk->sk_protocol != IPPROTO_TCP)
- return -EINVAL;
+ return -ENOPROTOOPT;
if (sk->sk_state != TCP_ESTABLISHED)
return -ENOTCONN;
val = sk->sk_family;
@@ -866,6 +876,8 @@
return -EINVAL;
if (copy_from_user(&gsf, optval, GROUP_FILTER_SIZE(0)))
return -EFAULT;
+ if (gsf.gf_group.ss_family != AF_INET6)
+ return -EADDRNOTAVAIL;
lock_sock(sk);
err = ip6_mc_msfget(sk, &gsf,
(struct group_filter __user *)optval, optlen);
@@ -975,6 +987,9 @@
len = ipv6_getsockopt_sticky(sk, np->opt,
optname, optval, len);
release_sock(sk);
+ /* check if ipv6_getsockopt_sticky() returns err code */
+ if (len < 0)
+ return len;
return put_user(len, optlen);
}
diff --git a/net/ipv6/mcast.c b/net/ipv6/mcast.c
index 54f91ef..fd632dd 100644
--- a/net/ipv6/mcast.c
+++ b/net/ipv6/mcast.c
@@ -1411,7 +1411,7 @@
IPV6_TLV_PADN, 0 };
/* we assume size > sizeof(ra) here */
- skb = sock_alloc_send_skb(sk, size + LL_RESERVED_SPACE(dev), 1, &err);
+ skb = sock_alloc_send_skb(sk, size + LL_ALLOCATED_SPACE(dev), 1, &err);
if (!skb)
return NULL;
@@ -1790,7 +1790,7 @@
payload_len = len + sizeof(ra);
full_len = sizeof(struct ipv6hdr) + payload_len;
- skb = sock_alloc_send_skb(sk, LL_RESERVED_SPACE(dev) + full_len, 1, &err);
+ skb = sock_alloc_send_skb(sk, LL_ALLOCATED_SPACE(dev) + full_len, 1, &err);
if (skb == NULL) {
rcu_read_lock();
diff --git a/net/ipv6/ndisc.c b/net/ipv6/ndisc.c
index 2c74885..282fdb3 100644
--- a/net/ipv6/ndisc.c
+++ b/net/ipv6/ndisc.c
@@ -479,7 +479,7 @@
skb = sock_alloc_send_skb(sk,
(MAX_HEADER + sizeof(struct ipv6hdr) +
- len + LL_RESERVED_SPACE(dev)),
+ len + LL_ALLOCATED_SPACE(dev)),
1, &err);
if (!skb) {
ND_PRINTK0(KERN_ERR
@@ -1521,7 +1521,7 @@
buff = sock_alloc_send_skb(sk,
(MAX_HEADER + sizeof(struct ipv6hdr) +
- len + LL_RESERVED_SPACE(dev)),
+ len + LL_ALLOCATED_SPACE(dev)),
1, &err);
if (buff == NULL) {
ND_PRINTK0(KERN_ERR
@@ -1727,10 +1727,10 @@
return ret;
}
-static int ndisc_ifinfo_sysctl_strategy(ctl_table *ctl, int __user *name,
- int nlen, void __user *oldval,
- size_t __user *oldlenp,
- void __user *newval, size_t newlen)
+int ndisc_ifinfo_sysctl_strategy(ctl_table *ctl, int __user *name,
+ int nlen, void __user *oldval,
+ size_t __user *oldlenp,
+ void __user *newval, size_t newlen)
{
struct net_device *dev = ctl->extra1;
struct inet6_dev *idev;
diff --git a/net/ipv6/netfilter/nf_conntrack_reasm.c b/net/ipv6/netfilter/nf_conntrack_reasm.c
index 2dccad4..e65e26e 100644
--- a/net/ipv6/netfilter/nf_conntrack_reasm.c
+++ b/net/ipv6/netfilter/nf_conntrack_reasm.c
@@ -209,7 +209,9 @@
arg.dst = dst;
hash = ip6qhashfn(id, src, dst);
+ local_bh_disable();
q = inet_frag_find(&nf_init_frags, &nf_frags, &arg, hash);
+ local_bh_enable();
if (q == NULL)
goto oom;
@@ -638,10 +640,10 @@
goto ret_orig;
}
- spin_lock(&fq->q.lock);
+ spin_lock_bh(&fq->q.lock);
if (nf_ct_frag6_queue(fq, clone, fhdr, nhoff) < 0) {
- spin_unlock(&fq->q.lock);
+ spin_unlock_bh(&fq->q.lock);
pr_debug("Can't insert skb to queue\n");
fq_put(fq);
goto ret_orig;
@@ -653,7 +655,7 @@
if (ret_skb == NULL)
pr_debug("Can't reassemble fragmented packets\n");
}
- spin_unlock(&fq->q.lock);
+ spin_unlock_bh(&fq->q.lock);
fq_put(fq);
return ret_skb;
diff --git a/net/ipv6/raw.c b/net/ipv6/raw.c
index 396f0ea..3aee123 100644
--- a/net/ipv6/raw.c
+++ b/net/ipv6/raw.c
@@ -609,7 +609,6 @@
struct ipv6_pinfo *np = inet6_sk(sk);
struct ipv6hdr *iph;
struct sk_buff *skb;
- unsigned int hh_len;
int err;
if (length > rt->u.dst.dev->mtu) {
@@ -619,13 +618,12 @@
if (flags&MSG_PROBE)
goto out;
- hh_len = LL_RESERVED_SPACE(rt->u.dst.dev);
-
- skb = sock_alloc_send_skb(sk, length+hh_len+15,
- flags&MSG_DONTWAIT, &err);
+ skb = sock_alloc_send_skb(sk,
+ length + LL_ALLOCATED_SPACE(rt->u.dst.dev) + 15,
+ flags & MSG_DONTWAIT, &err);
if (skb == NULL)
goto error;
- skb_reserve(skb, hh_len);
+ skb_reserve(skb, LL_RESERVED_SPACE(rt->u.dst.dev));
skb->priority = sk->sk_priority;
skb->mark = sk->sk_mark;
@@ -815,7 +813,7 @@
memset(opt, 0, sizeof(struct ipv6_txoptions));
opt->tot_len = sizeof(struct ipv6_txoptions);
- err = datagram_send_ctl(msg, &fl, opt, &hlimit, &tclass);
+ err = datagram_send_ctl(sock_net(sk), msg, &fl, opt, &hlimit, &tclass);
if (err < 0) {
fl6_sock_release(flowlabel);
return err;
@@ -1166,6 +1164,15 @@
sk_common_release(sk);
}
+static int raw6_destroy(struct sock *sk)
+{
+ lock_sock(sk);
+ ip6_flush_pending_frames(sk);
+ release_sock(sk);
+
+ return inet6_destroy_sock(sk);
+}
+
static int rawv6_init_sk(struct sock *sk)
{
struct raw6_sock *rp = raw6_sk(sk);
@@ -1189,11 +1196,11 @@
.name = "RAWv6",
.owner = THIS_MODULE,
.close = rawv6_close,
+ .destroy = raw6_destroy,
.connect = ip6_datagram_connect,
.disconnect = udp_disconnect,
.ioctl = rawv6_ioctl,
.init = rawv6_init_sk,
- .destroy = inet6_destroy_sock,
.setsockopt = rawv6_setsockopt,
.getsockopt = rawv6_getsockopt,
.sendmsg = rawv6_sendmsg,
diff --git a/net/ipv6/route.c b/net/ipv6/route.c
index 12bba08..d1f3e19 100644
--- a/net/ipv6/route.c
+++ b/net/ipv6/route.c
@@ -109,7 +109,7 @@
.negative_advice = ip6_negative_advice,
.link_failure = ip6_link_failure,
.update_pmtu = ip6_rt_update_pmtu,
- .local_out = ip6_local_out,
+ .local_out = __ip6_local_out,
.entry_size = sizeof(struct rt6_info),
.entries = ATOMIC_INIT(0),
};
@@ -446,7 +446,7 @@
struct route_info *rinfo = (struct route_info *) opt;
struct in6_addr prefix_buf, *prefix;
unsigned int pref;
- u32 lifetime;
+ unsigned long lifetime;
struct rt6_info *rt;
if (len < sizeof(struct route_info)) {
@@ -472,13 +472,7 @@
if (pref == ICMPV6_ROUTER_PREF_INVALID)
pref = ICMPV6_ROUTER_PREF_MEDIUM;
- lifetime = ntohl(rinfo->lifetime);
- if (lifetime == 0xffffffff) {
- /* infinity */
- } else if (lifetime > 0x7fffffff/HZ) {
- /* Avoid arithmetic overflow */
- lifetime = 0x7fffffff/HZ - 1;
- }
+ lifetime = addrconf_timeout_fixup(ntohl(rinfo->lifetime), HZ);
if (rinfo->length == 3)
prefix = (struct in6_addr *)rinfo->prefix;
@@ -506,7 +500,7 @@
(rt->rt6i_flags & ~RTF_PREF_MASK) | RTF_PREF(pref);
if (rt) {
- if (lifetime == 0xffffffff) {
+ if (!addrconf_finite_timeout(lifetime)) {
rt->rt6i_flags &= ~RTF_EXPIRES;
} else {
rt->rt6i_expires = jiffies + HZ * lifetime;
@@ -1106,7 +1100,9 @@
}
rt->u.dst.obsolete = -1;
- rt->rt6i_expires = jiffies + clock_t_to_jiffies(cfg->fc_expires);
+ rt->rt6i_expires = (cfg->fc_flags & RTF_EXPIRES) ?
+ jiffies + clock_t_to_jiffies(cfg->fc_expires) :
+ 0;
if (cfg->fc_protocol == RTPROT_UNSPEC)
cfg->fc_protocol = RTPROT_BOOT;
@@ -2200,7 +2196,13 @@
NLA_PUT_U32(skb, RTA_PRIORITY, rt->rt6i_metric);
- expires = rt->rt6i_expires ? rt->rt6i_expires - jiffies : 0;
+ if (!(rt->rt6i_flags & RTF_EXPIRES))
+ expires = 0;
+ else if (rt->rt6i_expires - jiffies < INT_MAX)
+ expires = rt->rt6i_expires - jiffies;
+ else
+ expires = INT_MAX;
+
if (rtnl_put_cacheinfo(skb, &rt->u.dst, 0, 0, 0,
expires, rt->u.dst.error) < 0)
goto nla_put_failure;
diff --git a/net/ipv6/sit.c b/net/ipv6/sit.c
index 5a6fab9..3de6ffd 100644
--- a/net/ipv6/sit.c
+++ b/net/ipv6/sit.c
@@ -403,9 +403,8 @@
static int ipip6_err(struct sk_buff *skb, u32 info)
{
-#ifndef I_WISH_WORLD_WERE_PERFECT
-/* It is not :-( All the routers (except for Linux) return only
+/* All the routers (except for Linux) return only
8 bytes of packet payload. It means, that precise relaying of
ICMP in the real Internet is absolutely infeasible.
*/
@@ -462,92 +461,6 @@
out:
read_unlock(&ipip6_lock);
return err;
-#else
- struct iphdr *iph = (struct iphdr*)dp;
- int hlen = iph->ihl<<2;
- struct ipv6hdr *iph6;
- const int type = icmp_hdr(skb)->type;
- const int code = icmp_hdr(skb)->code;
- int rel_type = 0;
- int rel_code = 0;
- int rel_info = 0;
- struct sk_buff *skb2;
- struct rt6_info *rt6i;
-
- if (len < hlen + sizeof(struct ipv6hdr))
- return;
- iph6 = (struct ipv6hdr*)(dp + hlen);
-
- switch (type) {
- default:
- return;
- case ICMP_PARAMETERPROB:
- if (icmp_hdr(skb)->un.gateway < hlen)
- return;
-
- /* So... This guy found something strange INSIDE encapsulated
- packet. Well, he is fool, but what can we do ?
- */
- rel_type = ICMPV6_PARAMPROB;
- rel_info = icmp_hdr(skb)->un.gateway - hlen;
- break;
-
- case ICMP_DEST_UNREACH:
- switch (code) {
- case ICMP_SR_FAILED:
- case ICMP_PORT_UNREACH:
- /* Impossible event. */
- return;
- case ICMP_FRAG_NEEDED:
- /* Too complicated case ... */
- return;
- default:
- /* All others are translated to HOST_UNREACH.
- rfc2003 contains "deep thoughts" about NET_UNREACH,
- I believe, it is just ether pollution. --ANK
- */
- rel_type = ICMPV6_DEST_UNREACH;
- rel_code = ICMPV6_ADDR_UNREACH;
- break;
- }
- break;
- case ICMP_TIME_EXCEEDED:
- if (code != ICMP_EXC_TTL)
- return;
- rel_type = ICMPV6_TIME_EXCEED;
- rel_code = ICMPV6_EXC_HOPLIMIT;
- break;
- }
-
- /* Prepare fake skb to feed it to icmpv6_send */
- skb2 = skb_clone(skb, GFP_ATOMIC);
- if (skb2 == NULL)
- return 0;
- dst_release(skb2->dst);
- skb2->dst = NULL;
- skb_pull(skb2, skb->data - (u8*)iph6);
- skb_reset_network_header(skb2);
-
- /* Try to guess incoming interface */
- rt6i = rt6_lookup(dev_net(skb->dev), &iph6->saddr, NULL, NULL, 0);
- if (rt6i && rt6i->rt6i_dev) {
- skb2->dev = rt6i->rt6i_dev;
-
- rt6i = rt6_lookup(dev_net(skb->dev),
- &iph6->daddr, &iph6->saddr, NULL, 0);
-
- if (rt6i && rt6i->rt6i_dev && rt6i->rt6i_dev->type == ARPHRD_SIT) {
- struct ip_tunnel *t = netdev_priv(rt6i->rt6i_dev);
- if (rel_type == ICMPV6_TIME_EXCEED && t->parms.iph.ttl) {
- rel_type = ICMPV6_DEST_UNREACH;
- rel_code = ICMPV6_ADDR_UNREACH;
- }
- icmpv6_send(skb2, rel_type, rel_code, rel_info, skb2->dev);
- }
- }
- kfree_skb(skb2);
- return 0;
-#endif
}
static inline void ipip6_ecn_decapsulate(struct iphdr *iph, struct sk_buff *skb)
diff --git a/net/ipv6/syncookies.c b/net/ipv6/syncookies.c
index 938ce4e..3ecc115 100644
--- a/net/ipv6/syncookies.c
+++ b/net/ipv6/syncookies.c
@@ -198,7 +198,6 @@
ireq = inet_rsk(req);
ireq6 = inet6_rsk(req);
treq = tcp_rsk(req);
- ireq6->pktopts = NULL;
if (security_inet_conn_request(sk, skb, req)) {
reqsk_free(req);
diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c
index 715965f..cb46749 100644
--- a/net/ipv6/tcp_ipv6.c
+++ b/net/ipv6/tcp_ipv6.c
@@ -1299,7 +1299,6 @@
treq = inet6_rsk(req);
ipv6_addr_copy(&treq->rmt_addr, &ipv6_hdr(skb)->saddr);
ipv6_addr_copy(&treq->loc_addr, &ipv6_hdr(skb)->daddr);
- treq->pktopts = NULL;
if (!want_cookie)
TCP_ECN_create_request(req, tcp_hdr(skb));
diff --git a/net/ipv6/tunnel6.c b/net/ipv6/tunnel6.c
index 6323921..669f280 100644
--- a/net/ipv6/tunnel6.c
+++ b/net/ipv6/tunnel6.c
@@ -109,7 +109,7 @@
{
struct xfrm6_tunnel *handler;
- if (!pskb_may_pull(skb, sizeof(struct ipv6hdr)))
+ if (!pskb_may_pull(skb, sizeof(struct iphdr)))
goto drop;
for (handler = tunnel46_handlers; handler; handler = handler->next)
diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c
index 1fd784f..dd30962 100644
--- a/net/ipv6/udp.c
+++ b/net/ipv6/udp.c
@@ -534,7 +534,9 @@
{
struct udp_sock *up = udp_sk(sk);
- if (up->pending) {
+ if (up->pending == AF_INET)
+ udp_flush_pending_frames(sk);
+ else if (up->pending) {
up->len = 0;
up->pending = 0;
ip6_flush_pending_frames(sk);
@@ -731,7 +733,7 @@
memset(opt, 0, sizeof(struct ipv6_txoptions));
opt->tot_len = sizeof(*opt);
- err = datagram_send_ctl(msg, &fl, opt, &hlimit, &tclass);
+ err = datagram_send_ctl(sock_net(sk), msg, &fl, opt, &hlimit, &tclass);
if (err < 0) {
fl6_sock_release(flowlabel);
return err;
@@ -848,12 +850,14 @@
} else {
dst_release(dst);
}
+ dst = NULL;
}
if (err > 0)
err = np->recverr ? net_xmit_errno(err) : 0;
release_sock(sk);
out:
+ dst_release(dst);
fl6_sock_release(flowlabel);
if (!err)
return len;
diff --git a/net/irda/af_irda.c b/net/irda/af_irda.c
index ae54b20..3eb5bcc 100644
--- a/net/irda/af_irda.c
+++ b/net/irda/af_irda.c
@@ -1093,11 +1093,6 @@
init_waitqueue_head(&self->query_wait);
- /* Initialise networking socket struct */
- sock_init_data(sock, sk); /* Note : set sk->sk_refcnt to 1 */
- sk->sk_family = PF_IRDA;
- sk->sk_protocol = protocol;
-
switch (sock->type) {
case SOCK_STREAM:
sock->ops = &irda_stream_ops;
@@ -1124,13 +1119,20 @@
self->max_sdu_size_rx = TTP_SAR_UNBOUND;
break;
default:
+ sk_free(sk);
return -ESOCKTNOSUPPORT;
}
break;
default:
+ sk_free(sk);
return -ESOCKTNOSUPPORT;
}
+ /* Initialise networking socket struct */
+ sock_init_data(sock, sk); /* Note : set sk->sk_refcnt to 1 */
+ sk->sk_family = PF_IRDA;
+ sk->sk_protocol = protocol;
+
/* Register as a client with IrLMP */
self->ckey = irlmp_register_client(0, NULL, NULL, NULL);
self->mask.word = 0xffff;
diff --git a/net/irda/discovery.c b/net/irda/discovery.c
index bfacef8..a6f99b5 100644
--- a/net/irda/discovery.c
+++ b/net/irda/discovery.c
@@ -40,6 +40,8 @@
#include <net/irda/discovery.h>
+#include <asm/unaligned.h>
+
/*
* Function irlmp_add_discovery (cachelog, discovery)
*
@@ -87,7 +89,7 @@
*/
hashbin_remove_this(cachelog, (irda_queue_t *) node);
/* Check if hints bits are unchanged */
- if(u16ho(node->data.hints) == u16ho(new->data.hints))
+ if (get_unaligned((__u16 *)node->data.hints) == get_unaligned((__u16 *)new->data.hints))
/* Set time of first discovery for this node */
new->firststamp = node->firststamp;
kfree(node);
@@ -281,9 +283,9 @@
/* Mask out the ones we don't want :
* We want to match the discovery mask, and to get only
* the most recent one (unless we want old ones) */
- if ((u16ho(discovery->data.hints) & mask) &&
+ if ((get_unaligned((__u16 *)discovery->data.hints) & mask) &&
((old_entries) ||
- ((jiffies - discovery->firststamp) < j_timeout)) ) {
+ ((jiffies - discovery->firststamp) < j_timeout))) {
/* Create buffer as needed.
* As this function get called a lot and most time
* we don't have anything to put in the log (we are
diff --git a/net/irda/irlmp.c b/net/irda/irlmp.c
index 1f81f8e..7bf5b91 100644
--- a/net/irda/irlmp.c
+++ b/net/irda/irlmp.c
@@ -1062,7 +1062,8 @@
for(i = 0; i < number; i++) {
/* Check if we should notify client */
if ((client->expir_callback) &&
- (client->hint_mask.word & u16ho(expiries[i].hints)
+ (client->hint_mask.word &
+ get_unaligned((__u16 *)expiries[i].hints)
& 0x7f7f) )
client->expir_callback(&(expiries[i]),
EXPIRY_TIMEOUT,
@@ -1086,7 +1087,7 @@
IRDA_ASSERT(irlmp != NULL, return NULL;);
- u16ho(irlmp->discovery_rsp.data.hints) = irlmp->hints.word;
+ put_unaligned(irlmp->hints.word, (__u16 *)irlmp->discovery_rsp.data.hints);
/*
* Set character set for device name (we use ASCII), and
diff --git a/net/irda/irnet/irnet_irda.c b/net/irda/irnet/irnet_irda.c
index 75497e5..cf9a4b5 100644
--- a/net/irda/irnet/irnet_irda.c
+++ b/net/irda/irnet/irnet_irda.c
@@ -10,6 +10,7 @@
#include "irnet_irda.h" /* Private header */
#include <linux/seq_file.h>
+#include <asm/unaligned.h>
/*
* PPP disconnect work: we need to make sure we're in
@@ -1673,7 +1674,7 @@
/* Notify the control channel */
irnet_post_event(NULL, IRNET_DISCOVER,
discovery->saddr, discovery->daddr, discovery->info,
- u16ho(discovery->hints));
+ get_unaligned((__u16 *)discovery->hints));
DEXIT(IRDA_OCB_TRACE, "\n");
}
@@ -1704,7 +1705,7 @@
/* Notify the control channel */
irnet_post_event(NULL, IRNET_EXPIRE,
expiry->saddr, expiry->daddr, expiry->info,
- u16ho(expiry->hints));
+ get_unaligned((__u16 *)expiry->hints));
DEXIT(IRDA_OCB_TRACE, "\n");
}
diff --git a/net/key/af_key.c b/net/key/af_key.c
index 9e7236f..7470e36 100644
--- a/net/key/af_key.c
+++ b/net/key/af_key.c
@@ -1251,7 +1251,7 @@
x->sel.prefixlen_s = addr->sadb_address_prefixlen;
}
- if (x->props.mode == XFRM_MODE_TRANSPORT)
+ if (!x->sel.family)
x->sel.family = x->props.family;
if (ext_hdrs[SADB_X_EXT_NAT_T_TYPE-1]) {
@@ -3030,6 +3030,9 @@
static int pfkey_send_notify(struct xfrm_state *x, struct km_event *c)
{
+ if (atomic_read(&pfkey_socks_nr) == 0)
+ return 0;
+
switch (c->event) {
case XFRM_MSG_EXPIRE:
return key_notify_sa_expire(x, c);
diff --git a/net/llc/llc_sap.c b/net/llc/llc_sap.c
index e2ddde7..008de1f 100644
--- a/net/llc/llc_sap.c
+++ b/net/llc/llc_sap.c
@@ -286,12 +286,14 @@
*
* Sends received pdus to the sap state machine.
*/
-static void llc_sap_rcv(struct llc_sap *sap, struct sk_buff *skb)
+static void llc_sap_rcv(struct llc_sap *sap, struct sk_buff *skb,
+ struct sock *sk)
{
struct llc_sap_state_ev *ev = llc_sap_ev(skb);
ev->type = LLC_SAP_EV_TYPE_PDU;
ev->reason = 0;
+ skb->sk = sk;
llc_sap_state_process(sap, skb);
}
@@ -360,8 +362,7 @@
break;
sock_hold(sk);
- skb_set_owner_r(skb1, sk);
- llc_sap_rcv(sap, skb1);
+ llc_sap_rcv(sap, skb1, sk);
sock_put(sk);
}
read_unlock_bh(&sap->sk_list.lock);
@@ -381,8 +382,7 @@
} else {
struct sock *sk = llc_lookup_dgram(sap, &laddr);
if (sk) {
- skb_set_owner_r(skb, sk);
- llc_sap_rcv(sap, skb);
+ llc_sap_rcv(sap, skb, sk);
sock_put(sk);
} else
kfree_skb(skb);
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 699d97b..a9fce4a 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -672,7 +672,7 @@
if (params->vlan) {
sdata = IEEE80211_DEV_TO_SUB_IF(params->vlan);
- if (sdata->vif.type != IEEE80211_IF_TYPE_VLAN ||
+ if (sdata->vif.type != IEEE80211_IF_TYPE_VLAN &&
sdata->vif.type != IEEE80211_IF_TYPE_AP)
return -EINVAL;
} else
@@ -760,7 +760,7 @@
if (params->vlan && params->vlan != sta->sdata->dev) {
vlansdata = IEEE80211_DEV_TO_SUB_IF(params->vlan);
- if (vlansdata->vif.type != IEEE80211_IF_TYPE_VLAN ||
+ if (vlansdata->vif.type != IEEE80211_IF_TYPE_VLAN &&
vlansdata->vif.type != IEEE80211_IF_TYPE_AP) {
rcu_read_unlock();
return -EINVAL;
diff --git a/net/mac80211/debugfs_key.c b/net/mac80211/debugfs_key.c
index 879e721..19efc3a 100644
--- a/net/mac80211/debugfs_key.c
+++ b/net/mac80211/debugfs_key.c
@@ -255,14 +255,23 @@
void ieee80211_debugfs_key_add_default(struct ieee80211_sub_if_data *sdata)
{
char buf[50];
+ struct ieee80211_key *key;
if (!sdata->debugfsdir)
return;
- sprintf(buf, "../keys/%d", sdata->default_key->debugfs.cnt);
- sdata->debugfs.default_key =
- debugfs_create_symlink("default_key", sdata->debugfsdir, buf);
+ /* this is running under the key lock */
+
+ key = sdata->default_key;
+ if (key) {
+ sprintf(buf, "../keys/%d", key->debugfs.cnt);
+ sdata->debugfs.default_key =
+ debugfs_create_symlink("default_key",
+ sdata->debugfsdir, buf);
+ } else
+ ieee80211_debugfs_key_remove_default(sdata);
}
+
void ieee80211_debugfs_key_remove_default(struct ieee80211_sub_if_data *sdata)
{
if (!sdata)
diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h
index c7314bf..006486b 100644
--- a/net/mac80211/ieee80211_i.h
+++ b/net/mac80211/ieee80211_i.h
@@ -899,7 +899,7 @@
/* ieee80211_ioctl.c */
-int ieee80211_set_freq(struct ieee80211_local *local, int freq);
+int ieee80211_set_freq(struct net_device *dev, int freq);
/* ieee80211_sta.c */
void ieee80211_sta_timer(unsigned long data);
void ieee80211_sta_work(struct work_struct *work);
diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c
index 80954a5..06e88a5 100644
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -54,6 +54,15 @@
if (!ndev)
return -ENOMEM;
+ ndev->needed_headroom = local->tx_headroom +
+ 4*6 /* four MAC addresses */
+ + 2 + 2 + 2 + 2 /* ctl, dur, seq, qos */
+ + 6 /* mesh */
+ + 8 /* rfc1042/bridge tunnel */
+ - ETH_HLEN /* ethernet hard_header_len */
+ + IEEE80211_ENCRYPT_HEADROOM;
+ ndev->needed_tailroom = IEEE80211_ENCRYPT_TAILROOM;
+
ret = dev_alloc_name(ndev, ndev->name);
if (ret < 0)
goto fail;
diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index 915afad..98c0b5e 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -511,6 +511,7 @@
case IEEE80211_IF_TYPE_STA:
case IEEE80211_IF_TYPE_IBSS:
sdata->u.sta.state = IEEE80211_DISABLED;
+ memset(sdata->u.sta.bssid, 0, ETH_ALEN);
del_timer_sync(&sdata->u.sta.timer);
/*
* When we get here, the interface is marked down.
@@ -1313,7 +1314,7 @@
/*
* Clear the TX filter mask for this STA when sending the next
* packet. If the STA went to power save mode, this will happen
- * happen when it wakes up for the next time.
+ * when it wakes up for the next time.
*/
sta->flags |= WLAN_STA_CLEAR_PS_FILT;
diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c
index f76bc26..697ef67 100644
--- a/net/mac80211/mesh.c
+++ b/net/mac80211/mesh.c
@@ -397,7 +397,7 @@
put_unaligned(cpu_to_le32(sdata->u.sta.mesh_seqnum), &meshhdr->seqnum);
sdata->u.sta.mesh_seqnum++;
- return 5;
+ return 6;
}
void ieee80211_mesh_init_sdata(struct ieee80211_sub_if_data *sdata)
diff --git a/net/mac80211/mesh_hwmp.c b/net/mac80211/mesh_hwmp.c
index 3df8092..af0cd1e 100644
--- a/net/mac80211/mesh_hwmp.c
+++ b/net/mac80211/mesh_hwmp.c
@@ -120,7 +120,7 @@
*pos++ = WLAN_EID_PREP;
break;
default:
- kfree(skb);
+ kfree_skb(skb);
return -ENOTSUPP;
break;
}
diff --git a/net/mac80211/mesh_pathtbl.c b/net/mac80211/mesh_pathtbl.c
index 5845dc2..99c2d36 100644
--- a/net/mac80211/mesh_pathtbl.c
+++ b/net/mac80211/mesh_pathtbl.c
@@ -158,19 +158,25 @@
if (atomic_add_unless(&sdata->u.sta.mpaths, 1, MESH_MAX_MPATHS) == 0)
return -ENOSPC;
- read_lock(&pathtbl_resize_lock);
-
new_mpath = kzalloc(sizeof(struct mesh_path), GFP_KERNEL);
if (!new_mpath) {
atomic_dec(&sdata->u.sta.mpaths);
err = -ENOMEM;
goto endadd2;
}
+ new_node = kmalloc(sizeof(struct mpath_node), GFP_KERNEL);
+ if (!new_node) {
+ kfree(new_mpath);
+ atomic_dec(&sdata->u.sta.mpaths);
+ err = -ENOMEM;
+ goto endadd2;
+ }
+
+ read_lock(&pathtbl_resize_lock);
memcpy(new_mpath->dst, dst, ETH_ALEN);
new_mpath->dev = dev;
new_mpath->flags = 0;
skb_queue_head_init(&new_mpath->frame_queue);
- new_node = kmalloc(sizeof(struct mpath_node), GFP_KERNEL);
new_node->mpath = new_mpath;
new_mpath->timer.data = (unsigned long) new_mpath;
new_mpath->timer.function = mesh_path_timer;
@@ -202,7 +208,6 @@
endadd:
spin_unlock(&mesh_paths->hashwlock[hash_idx]);
-endadd2:
read_unlock(&pathtbl_resize_lock);
if (!err && grow) {
struct mesh_table *oldtbl, *newtbl;
@@ -215,10 +220,12 @@
return -ENOMEM;
}
rcu_assign_pointer(mesh_paths, newtbl);
+ write_unlock(&pathtbl_resize_lock);
+
synchronize_rcu();
mesh_table_free(oldtbl, false);
- write_unlock(&pathtbl_resize_lock);
}
+endadd2:
return err;
}
diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c
index a5e5c31..4d2b582 100644
--- a/net/mac80211/mlme.c
+++ b/net/mac80211/mlme.c
@@ -44,7 +44,7 @@
#define IEEE80211_RETRY_AUTH_INTERVAL (1 * HZ)
#define IEEE80211_SCAN_INTERVAL (2 * HZ)
#define IEEE80211_SCAN_INTERVAL_SLOW (15 * HZ)
-#define IEEE80211_IBSS_JOIN_TIMEOUT (20 * HZ)
+#define IEEE80211_IBSS_JOIN_TIMEOUT (7 * HZ)
#define IEEE80211_PROBE_DELAY (HZ / 33)
#define IEEE80211_CHANNEL_TIME (HZ / 33)
@@ -665,6 +665,26 @@
mod_timer(&ifsta->timer, jiffies + IEEE80211_AUTH_TIMEOUT);
}
+static int ieee80211_compatible_rates(struct ieee80211_sta_bss *bss,
+ struct ieee80211_supported_band *sband,
+ u64 *rates)
+{
+ int i, j, count;
+ *rates = 0;
+ count = 0;
+ for (i = 0; i < bss->supp_rates_len; i++) {
+ int rate = (bss->supp_rates[i] & 0x7F) * 5;
+
+ for (j = 0; j < sband->n_bitrates; j++)
+ if (sband->bitrates[j].bitrate == rate) {
+ *rates |= BIT(j);
+ count++;
+ break;
+ }
+ }
+
+ return count;
+}
static void ieee80211_send_assoc(struct net_device *dev,
struct ieee80211_if_sta *ifsta)
@@ -673,11 +693,12 @@
struct sk_buff *skb;
struct ieee80211_mgmt *mgmt;
u8 *pos, *ies;
- int i, len;
+ int i, len, count, rates_len, supp_rates_len;
u16 capab;
struct ieee80211_sta_bss *bss;
int wmm = 0;
struct ieee80211_supported_band *sband;
+ u64 rates = 0;
skb = dev_alloc_skb(local->hw.extra_tx_headroom +
sizeof(*mgmt) + 200 + ifsta->extra_ie_len +
@@ -709,7 +730,17 @@
if (bss->wmm_ie) {
wmm = 1;
}
+
+ /* get all rates supported by the device and the AP as
+ * some APs don't like getting a superset of their rates
+ * in the association request (e.g. D-Link DAP 1353 in
+ * b-only mode) */
+ rates_len = ieee80211_compatible_rates(bss, sband, &rates);
+
ieee80211_rx_bss_put(dev, bss);
+ } else {
+ rates = ~0;
+ rates_len = sband->n_bitrates;
}
mgmt = (struct ieee80211_mgmt *) skb_put(skb, 24);
@@ -740,24 +771,36 @@
*pos++ = ifsta->ssid_len;
memcpy(pos, ifsta->ssid, ifsta->ssid_len);
- len = sband->n_bitrates;
- if (len > 8)
- len = 8;
- pos = skb_put(skb, len + 2);
- *pos++ = WLAN_EID_SUPP_RATES;
- *pos++ = len;
- for (i = 0; i < len; i++) {
- int rate = sband->bitrates[i].bitrate;
- *pos++ = (u8) (rate / 5);
- }
+ /* add all rates which were marked to be used above */
+ supp_rates_len = rates_len;
+ if (supp_rates_len > 8)
+ supp_rates_len = 8;
- if (sband->n_bitrates > len) {
- pos = skb_put(skb, sband->n_bitrates - len + 2);
- *pos++ = WLAN_EID_EXT_SUPP_RATES;
- *pos++ = sband->n_bitrates - len;
- for (i = len; i < sband->n_bitrates; i++) {
+ len = sband->n_bitrates;
+ pos = skb_put(skb, supp_rates_len + 2);
+ *pos++ = WLAN_EID_SUPP_RATES;
+ *pos++ = supp_rates_len;
+
+ count = 0;
+ for (i = 0; i < sband->n_bitrates; i++) {
+ if (BIT(i) & rates) {
int rate = sband->bitrates[i].bitrate;
*pos++ = (u8) (rate / 5);
+ if (++count == 8)
+ break;
+ }
+ }
+
+ if (count == 8) {
+ pos = skb_put(skb, rates_len - count + 2);
+ *pos++ = WLAN_EID_EXT_SUPP_RATES;
+ *pos++ = rates_len - count;
+
+ for (i++; i < sband->n_bitrates; i++) {
+ if (BIT(i) & rates) {
+ int rate = sband->bitrates[i].bitrate;
+ *pos++ = (u8) (rate / 5);
+ }
}
}
@@ -1282,7 +1325,7 @@
/* prepare reordering buffer */
tid_agg_rx->reorder_buf =
- kmalloc(buf_size * sizeof(struct sk_buf *), GFP_ATOMIC);
+ kmalloc(buf_size * sizeof(struct sk_buff *), GFP_ATOMIC);
if (!tid_agg_rx->reorder_buf) {
if (net_ratelimit())
printk(KERN_ERR "can not allocate reordering buffer "
@@ -1291,7 +1334,7 @@
goto end;
}
memset(tid_agg_rx->reorder_buf, 0,
- buf_size * sizeof(struct sk_buf *));
+ buf_size * sizeof(struct sk_buff *));
if (local->ops->ampdu_action)
ret = local->ops->ampdu_action(hw, IEEE80211_AMPDU_RX_START,
@@ -1571,7 +1614,7 @@
* only one argument, and both sta_info and TID are needed, so init
* flow in sta_info_create gives the TID as data, while the timer_to_id
* array gives the sta through container_of */
- u16 tid = *(int *)data;
+ u16 tid = *(u8 *)data;
struct sta_info *temp_sta = container_of((void *)data,
struct sta_info, timer_to_tid[tid]);
@@ -1619,7 +1662,7 @@
void sta_rx_agg_session_timer_expired(unsigned long data)
{
/* not an elegant detour, but there is no choice as the timer passes
- * only one argument, and verious sta_info are needed here, so init
+ * only one argument, and various sta_info are needed here, so init
* flow in sta_info_create gives the TID as data, while the timer_to_id
* array gives the sta through container_of */
u8 *ptid = (u8 *)data;
@@ -2293,6 +2336,7 @@
u8 *pos;
struct ieee80211_sub_if_data *sdata;
struct ieee80211_supported_band *sband;
+ union iwreq_data wrqu;
sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
@@ -2315,13 +2359,10 @@
sdata->drop_unencrypted = bss->capability &
WLAN_CAPABILITY_PRIVACY ? 1 : 0;
- res = ieee80211_set_freq(local, bss->freq);
+ res = ieee80211_set_freq(dev, bss->freq);
- if (local->oper_channel->flags & IEEE80211_CHAN_NO_IBSS) {
- printk(KERN_DEBUG "%s: IBSS not allowed on frequency "
- "%d MHz\n", dev->name, local->oper_channel->center_freq);
- return -1;
- }
+ if (res)
+ return res;
/* Set beacon template */
skb = dev_alloc_skb(local->hw.extra_tx_headroom + 400);
@@ -2436,7 +2477,9 @@
ifsta->state = IEEE80211_IBSS_JOINED;
mod_timer(&ifsta->timer, jiffies + IEEE80211_IBSS_MERGE_INTERVAL);
- ieee80211_rx_bss_put(dev, bss);
+ memset(&wrqu, 0, sizeof(wrqu));
+ memcpy(wrqu.ap_addr.sa_data, bss->bssid, ETH_ALEN);
+ wireless_send_event(dev, SIOCGIWAP, &wrqu, NULL);
return res;
}
@@ -3410,21 +3453,17 @@
struct ieee80211_sta_bss *bss, *selected = NULL;
int top_rssi = 0, freq;
- if (!(ifsta->flags & (IEEE80211_STA_AUTO_SSID_SEL |
- IEEE80211_STA_AUTO_BSSID_SEL | IEEE80211_STA_AUTO_CHANNEL_SEL))) {
- ifsta->state = IEEE80211_AUTHENTICATE;
- ieee80211_sta_reset_auth(dev, ifsta);
- return 0;
- }
-
spin_lock_bh(&local->sta_bss_lock);
freq = local->oper_channel->center_freq;
list_for_each_entry(bss, &local->sta_bss_list, list) {
if (!(bss->capability & WLAN_CAPABILITY_ESS))
continue;
- if (!!(bss->capability & WLAN_CAPABILITY_PRIVACY) ^
- !!sdata->default_key)
+ if ((ifsta->flags & (IEEE80211_STA_AUTO_SSID_SEL |
+ IEEE80211_STA_AUTO_BSSID_SEL |
+ IEEE80211_STA_AUTO_CHANNEL_SEL)) &&
+ (!!(bss->capability & WLAN_CAPABILITY_PRIVACY) ^
+ !!sdata->default_key))
continue;
if (!(ifsta->flags & IEEE80211_STA_AUTO_CHANNEL_SEL) &&
@@ -3449,7 +3488,7 @@
spin_unlock_bh(&local->sta_bss_lock);
if (selected) {
- ieee80211_set_freq(local, selected->freq);
+ ieee80211_set_freq(dev, selected->freq);
if (!(ifsta->flags & IEEE80211_STA_SSID_SET))
ieee80211_sta_set_ssid(dev, selected->ssid,
selected->ssid_len);
@@ -3484,6 +3523,7 @@
struct ieee80211_supported_band *sband;
u8 bssid[ETH_ALEN], *pos;
int i;
+ int ret;
DECLARE_MAC_BUF(mac);
#if 0
@@ -3528,7 +3568,9 @@
*pos++ = (u8) (rate / 5);
}
- return ieee80211_sta_join_ibss(dev, ifsta, bss);
+ ret = ieee80211_sta_join_ibss(dev, ifsta, bss);
+ ieee80211_rx_bss_put(dev, bss);
+ return ret;
}
@@ -3576,10 +3618,13 @@
(bss = ieee80211_rx_bss_get(dev, bssid,
local->hw.conf.channel->center_freq,
ifsta->ssid, ifsta->ssid_len))) {
+ int ret;
printk(KERN_DEBUG "%s: Selected IBSS BSSID %s"
" based on configured SSID\n",
dev->name, print_mac(mac, bssid));
- return ieee80211_sta_join_ibss(dev, ifsta, bss);
+ ret = ieee80211_sta_join_ibss(dev, ifsta, bss);
+ ieee80211_rx_bss_put(dev, bss);
+ return ret;
}
#ifdef CONFIG_MAC80211_IBSS_DEBUG
printk(KERN_DEBUG " did not try to join ibss\n");
@@ -4056,19 +4101,18 @@
memset(&iwe, 0, sizeof(iwe));
iwe.cmd = SIOCGIWFREQ;
- iwe.u.freq.m = bss->freq;
- iwe.u.freq.e = 6;
- current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe,
- IW_EV_FREQ_LEN);
-
- memset(&iwe, 0, sizeof(iwe));
- iwe.cmd = SIOCGIWFREQ;
iwe.u.freq.m = ieee80211_frequency_to_channel(bss->freq);
iwe.u.freq.e = 0;
current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe,
IW_EV_FREQ_LEN);
memset(&iwe, 0, sizeof(iwe));
+ iwe.cmd = SIOCGIWFREQ;
+ iwe.u.freq.m = bss->freq;
+ iwe.u.freq.e = 6;
+ current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe,
+ IW_EV_FREQ_LEN);
+ memset(&iwe, 0, sizeof(iwe));
iwe.cmd = IWEVQUAL;
iwe.u.qual.qual = bss->signal;
iwe.u.qual.level = bss->rssi;
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index 02f436a..0941e5d 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -1091,7 +1091,7 @@
u16 fc, hdrlen, ethertype;
u8 *payload;
u8 dst[ETH_ALEN];
- u8 src[ETH_ALEN];
+ u8 src[ETH_ALEN] __aligned(2);
struct sk_buff *skb = rx->skb;
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
DECLARE_MAC_BUF(mac);
@@ -1234,7 +1234,7 @@
*/
static bool ieee80211_frame_allowed(struct ieee80211_rx_data *rx)
{
- static const u8 pae_group_addr[ETH_ALEN]
+ static const u8 pae_group_addr[ETH_ALEN] __aligned(2)
= { 0x01, 0x80, 0xC2, 0x00, 0x00, 0x03 };
struct ethhdr *ehdr = (struct ethhdr *) rx->skb->data;
@@ -1305,11 +1305,11 @@
if (is_multicast_ether_addr(skb->data)) {
if (*mesh_ttl > 0) {
xmit_skb = skb_copy(skb, GFP_ATOMIC);
- if (!xmit_skb && net_ratelimit())
+ if (xmit_skb)
+ xmit_skb->pkt_type = PACKET_OTHERHOST;
+ else if (net_ratelimit())
printk(KERN_DEBUG "%s: failed to clone "
"multicast frame\n", dev->name);
- else
- xmit_skb->pkt_type = PACKET_OTHERHOST;
} else
IEEE80211_IFSTA_MESH_CTR_INC(&sdata->u.sta,
dropped_frames_ttl);
@@ -1395,7 +1395,7 @@
padding = ((4 - subframe_len) & 0x3);
/* the last MSDU has no padding */
if (subframe_len > remaining) {
- printk(KERN_DEBUG "%s: wrong buffer size", dev->name);
+ printk(KERN_DEBUG "%s: wrong buffer size\n", dev->name);
return RX_DROP_UNUSABLE;
}
@@ -1418,7 +1418,7 @@
eth = (struct ethhdr *) skb_pull(skb, ntohs(len) +
padding);
if (!eth) {
- printk(KERN_DEBUG "%s: wrong buffer size ",
+ printk(KERN_DEBUG "%s: wrong buffer size\n",
dev->name);
dev_kfree_skb(frame);
return RX_DROP_UNUSABLE;
@@ -1952,7 +1952,7 @@
if (!skb_new) {
if (net_ratelimit())
printk(KERN_DEBUG "%s: failed to copy "
- "multicast frame for %s",
+ "multicast frame for %s\n",
wiphy_name(local->hw.wiphy),
prev->dev->name);
continue;
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index f35eaea9..1d7dd54 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -1562,13 +1562,13 @@
* be cloned. This could happen, e.g., with Linux bridge code passing
* us broadcast frames. */
- if (head_need > 0 || skb_cloned(skb)) {
+ if (head_need > 0 || skb_header_cloned(skb)) {
#if 0
printk(KERN_DEBUG "%s: need to reallocate buffer for %d bytes "
"of headroom\n", dev->name, head_need);
#endif
- if (skb_cloned(skb))
+ if (skb_header_cloned(skb))
I802_DEBUG_INC(local->tx_expand_skb_head_cloned);
else
I802_DEBUG_INC(local->tx_expand_skb_head);
@@ -1898,6 +1898,7 @@
control->flags |= IEEE80211_TXCTL_SHORT_PREAMBLE;
control->antenna_sel_tx = local->hw.conf.antenna_sel_tx;
control->flags |= IEEE80211_TXCTL_NO_ACK;
+ control->flags |= IEEE80211_TXCTL_DO_NOT_ENCRYPT;
control->retry_limit = 1;
control->flags |= IEEE80211_TXCTL_CLEAR_PS_FILT;
}
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index cc9f715..4e97b26 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -34,11 +34,11 @@
/* See IEEE 802.1H for LLC/SNAP encapsulation/decapsulation */
/* Ethernet-II snap header (RFC1042 for most EtherTypes) */
-const unsigned char rfc1042_header[] =
+const unsigned char rfc1042_header[] __aligned(2) =
{ 0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00 };
/* Bridge-Tunnel header (for EtherTypes ETH_P_AARP and ETH_P_IPX) */
-const unsigned char bridge_tunnel_header[] =
+const unsigned char bridge_tunnel_header[] __aligned(2) =
{ 0xaa, 0xaa, 0x03, 0x00, 0x00, 0xf8 };
@@ -153,15 +153,15 @@
/* 7.1.3.5a.2 */
switch (ae) {
case 0:
- return 5;
+ return 6;
case 1:
- return 11;
+ return 12;
case 2:
- return 17;
+ return 18;
case 3:
- return 23;
+ return 24;
default:
- return 5;
+ return 6;
}
}
@@ -389,6 +389,41 @@
struct ieee80211_local *local = hw_to_local(hw);
struct ieee80211_sub_if_data *sdata;
+ rtnl_lock();
+
+ list_for_each_entry(sdata, &local->interfaces, list) {
+ switch (sdata->vif.type) {
+ case IEEE80211_IF_TYPE_INVALID:
+ case IEEE80211_IF_TYPE_MNTR:
+ case IEEE80211_IF_TYPE_VLAN:
+ continue;
+ case IEEE80211_IF_TYPE_AP:
+ case IEEE80211_IF_TYPE_STA:
+ case IEEE80211_IF_TYPE_IBSS:
+ case IEEE80211_IF_TYPE_WDS:
+ case IEEE80211_IF_TYPE_MESH_POINT:
+ break;
+ }
+ if (sdata->dev == local->mdev)
+ continue;
+ if (netif_running(sdata->dev))
+ iterator(data, sdata->dev->dev_addr,
+ &sdata->vif);
+ }
+
+ rtnl_unlock();
+}
+EXPORT_SYMBOL_GPL(ieee80211_iterate_active_interfaces);
+
+void ieee80211_iterate_active_interfaces_atomic(
+ struct ieee80211_hw *hw,
+ void (*iterator)(void *data, u8 *mac,
+ struct ieee80211_vif *vif),
+ void *data)
+{
+ struct ieee80211_local *local = hw_to_local(hw);
+ struct ieee80211_sub_if_data *sdata;
+
rcu_read_lock();
list_for_each_entry_rcu(sdata, &local->interfaces, list) {
@@ -413,4 +448,4 @@
rcu_read_unlock();
}
-EXPORT_SYMBOL_GPL(ieee80211_iterate_active_interfaces);
+EXPORT_SYMBOL_GPL(ieee80211_iterate_active_interfaces_atomic);
diff --git a/net/mac80211/wext.c b/net/mac80211/wext.c
index 76e1de1..a8bb8e3 100644
--- a/net/mac80211/wext.c
+++ b/net/mac80211/wext.c
@@ -209,7 +209,6 @@
range->num_frequency = c;
IW_EVENT_CAPA_SET_KERNEL(range->event_capa);
- IW_EVENT_CAPA_SET(range->event_capa, SIOCGIWTHRSPY);
IW_EVENT_CAPA_SET(range->event_capa, SIOCGIWAP);
IW_EVENT_CAPA_SET(range->event_capa, SIOCGIWSCAN);
@@ -291,14 +290,22 @@
return 0;
}
-int ieee80211_set_freq(struct ieee80211_local *local, int freqMHz)
+int ieee80211_set_freq(struct net_device *dev, int freqMHz)
{
int ret = -EINVAL;
struct ieee80211_channel *chan;
+ struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
+ struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
chan = ieee80211_get_channel(local->hw.wiphy, freqMHz);
if (chan && !(chan->flags & IEEE80211_CHAN_DISABLED)) {
+ if (sdata->vif.type == IEEE80211_IF_TYPE_IBSS &&
+ chan->flags & IEEE80211_CHAN_NO_IBSS) {
+ printk(KERN_DEBUG "%s: IBSS not allowed on frequency "
+ "%d MHz\n", dev->name, chan->center_freq);
+ return ret;
+ }
local->oper_channel = chan;
if (local->sta_sw_scanning || local->sta_hw_scanning)
@@ -316,7 +323,6 @@
struct iw_request_info *info,
struct iw_freq *freq, char *extra)
{
- struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr);
struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev);
if (sdata->vif.type == IEEE80211_IF_TYPE_STA)
@@ -330,14 +336,14 @@
IEEE80211_STA_AUTO_CHANNEL_SEL;
return 0;
} else
- return ieee80211_set_freq(local,
+ return ieee80211_set_freq(dev,
ieee80211_channel_to_frequency(freq->m));
} else {
int i, div = 1000000;
for (i = 0; i < freq->e; i++)
div /= 10;
if (div > 0)
- return ieee80211_set_freq(local, freq->m / div);
+ return ieee80211_set_freq(dev, freq->m / div);
else
return -EINVAL;
}
@@ -490,9 +496,14 @@
sdata = IEEE80211_DEV_TO_SUB_IF(dev);
if (sdata->vif.type == IEEE80211_IF_TYPE_STA ||
sdata->vif.type == IEEE80211_IF_TYPE_IBSS) {
- ap_addr->sa_family = ARPHRD_ETHER;
- memcpy(&ap_addr->sa_data, sdata->u.sta.bssid, ETH_ALEN);
- return 0;
+ if (sdata->u.sta.state == IEEE80211_ASSOCIATED) {
+ ap_addr->sa_family = ARPHRD_ETHER;
+ memcpy(&ap_addr->sa_data, sdata->u.sta.bssid, ETH_ALEN);
+ return 0;
+ } else {
+ memset(&ap_addr->sa_data, 0, ETH_ALEN);
+ return 0;
+ }
} else if (sdata->vif.type == IEEE80211_IF_TYPE_WDS) {
ap_addr->sa_family = ARPHRD_ETHER;
memcpy(&ap_addr->sa_data, sdata->u.wds.remote_addr, ETH_ALEN);
diff --git a/net/mac80211/wme.c b/net/mac80211/wme.c
index 64faa3d..dc1598b8 100644
--- a/net/mac80211/wme.c
+++ b/net/mac80211/wme.c
@@ -394,7 +394,8 @@
qd->handle);
if (!q->queues[i]) {
q->queues[i] = &noop_qdisc;
- printk(KERN_ERR "%s child qdisc %i creation failed", dev->name, i);
+ printk(KERN_ERR "%s child qdisc %i creation failed\n",
+ dev->name, i);
}
}
diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c
index c4b1799..662c1cc 100644
--- a/net/netfilter/nf_conntrack_core.c
+++ b/net/netfilter/nf_conntrack_core.c
@@ -196,8 +196,6 @@
if (l4proto && l4proto->destroy)
l4proto->destroy(ct);
- nf_ct_ext_destroy(ct);
-
rcu_read_unlock();
spin_lock_bh(&nf_conntrack_lock);
@@ -520,6 +518,7 @@
void nf_conntrack_free(struct nf_conn *ct)
{
+ nf_ct_ext_destroy(ct);
call_rcu(&ct->rcu, nf_conntrack_free_rcu);
}
EXPORT_SYMBOL_GPL(nf_conntrack_free);
diff --git a/net/netfilter/nf_conntrack_expect.c b/net/netfilter/nf_conntrack_expect.c
index e31beeb..e8f0dea 100644
--- a/net/netfilter/nf_conntrack_expect.c
+++ b/net/netfilter/nf_conntrack_expect.c
@@ -587,10 +587,10 @@
return 0;
err3:
+ kmem_cache_destroy(nf_ct_expect_cachep);
+err2:
nf_ct_free_hashtable(nf_ct_expect_hash, nf_ct_expect_vmalloc,
nf_ct_expect_hsize);
-err2:
- kmem_cache_destroy(nf_ct_expect_cachep);
err1:
return err;
}
diff --git a/net/netfilter/nf_conntrack_netlink.c b/net/netfilter/nf_conntrack_netlink.c
index 16774ec..0edefcf 100644
--- a/net/netfilter/nf_conntrack_netlink.c
+++ b/net/netfilter/nf_conntrack_netlink.c
@@ -472,6 +472,9 @@
goto nla_put_failure;
nla_nest_end(skb, nest_parms);
+ if (ctnetlink_dump_id(skb, ct) < 0)
+ goto nla_put_failure;
+
if (events & IPCT_DESTROY) {
if (ctnetlink_dump_counters(skb, ct, IP_CT_DIR_ORIGINAL) < 0 ||
ctnetlink_dump_counters(skb, ct, IP_CT_DIR_REPLY) < 0)
diff --git a/net/netfilter/nf_log.c b/net/netfilter/nf_log.c
index bc11d70..9fda6ee 100644
--- a/net/netfilter/nf_log.c
+++ b/net/netfilter/nf_log.c
@@ -92,10 +92,6 @@
vsnprintf(prefix, sizeof(prefix), fmt, args);
va_end(args);
logger->logfn(pf, hooknum, skb, in, out, loginfo, prefix);
- } else if (net_ratelimit()) {
- printk(KERN_WARNING "nf_log_packet: can\'t log since "
- "no backend logging module loaded in! Please either "
- "load one, or disable logging explicitly\n");
}
rcu_read_unlock();
}
diff --git a/net/netfilter/xt_connlimit.c b/net/netfilter/xt_connlimit.c
index 2e89a00..70907f6b 100644
--- a/net/netfilter/xt_connlimit.c
+++ b/net/netfilter/xt_connlimit.c
@@ -73,7 +73,8 @@
static inline bool already_closed(const struct nf_conn *conn)
{
if (nf_ct_protonum(conn) == IPPROTO_TCP)
- return conn->proto.tcp.state == TCP_CONNTRACK_TIME_WAIT;
+ return conn->proto.tcp.state == TCP_CONNTRACK_TIME_WAIT ||
+ conn->proto.tcp.state == TCP_CONNTRACK_CLOSE;
else
return 0;
}
diff --git a/net/netfilter/xt_iprange.c b/net/netfilter/xt_iprange.c
index 500528d..c63e933 100644
--- a/net/netfilter/xt_iprange.c
+++ b/net/netfilter/xt_iprange.c
@@ -179,3 +179,5 @@
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>, Jan Engelhardt <jengelh@computergmbh.de>");
MODULE_DESCRIPTION("Xtables: arbitrary IPv4 range matching");
+MODULE_ALIAS("ipt_iprange");
+MODULE_ALIAS("ip6t_iprange");
diff --git a/net/netlink/attr.c b/net/netlink/attr.c
index feb326f..47bbf45 100644
--- a/net/netlink/attr.c
+++ b/net/netlink/attr.c
@@ -400,13 +400,13 @@
* @attrlen: length of attribute payload
* @data: head of attribute payload
*
- * Returns -1 if the tailroom of the skb is insufficient to store
+ * Returns -EMSGSIZE if the tailroom of the skb is insufficient to store
* the attribute header and payload.
*/
int nla_put(struct sk_buff *skb, int attrtype, int attrlen, const void *data)
{
if (unlikely(skb_tailroom(skb) < nla_total_size(attrlen)))
- return -1;
+ return -EMSGSIZE;
__nla_put(skb, attrtype, attrlen, data);
return 0;
@@ -418,13 +418,13 @@
* @attrlen: length of attribute payload
* @data: head of attribute payload
*
- * Returns -1 if the tailroom of the skb is insufficient to store
+ * Returns -EMSGSIZE if the tailroom of the skb is insufficient to store
* the attribute payload.
*/
int nla_put_nohdr(struct sk_buff *skb, int attrlen, const void *data)
{
if (unlikely(skb_tailroom(skb) < NLA_ALIGN(attrlen)))
- return -1;
+ return -EMSGSIZE;
__nla_put_nohdr(skb, attrlen, data);
return 0;
@@ -436,13 +436,13 @@
* @attrlen: length of attribute payload
* @data: head of attribute payload
*
- * Returns -1 if the tailroom of the skb is insufficient to store
+ * Returns -EMSGSIZE if the tailroom of the skb is insufficient to store
* the attribute payload.
*/
int nla_append(struct sk_buff *skb, int attrlen, const void *data)
{
if (unlikely(skb_tailroom(skb) < NLA_ALIGN(attrlen)))
- return -1;
+ return -EMSGSIZE;
memcpy(skb_put(skb, attrlen), data, attrlen);
return 0;
diff --git a/net/netlink/genetlink.c b/net/netlink/genetlink.c
index d16929c..f5aa23c 100644
--- a/net/netlink/genetlink.c
+++ b/net/netlink/genetlink.c
@@ -554,7 +554,8 @@
return genlmsg_end(skb, hdr);
nla_put_failure:
- return genlmsg_cancel(skb, hdr);
+ genlmsg_cancel(skb, hdr);
+ return -EMSGSIZE;
}
static int ctrl_fill_mcgrp_info(struct genl_multicast_group *grp, u32 pid,
@@ -590,7 +591,8 @@
return genlmsg_end(skb, hdr);
nla_put_failure:
- return genlmsg_cancel(skb, hdr);
+ genlmsg_cancel(skb, hdr);
+ return -EMSGSIZE;
}
static int ctrl_dumpfamily(struct sk_buff *skb, struct netlink_callback *cb)
diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c
index 2507024..2cee87d 100644
--- a/net/packet/af_packet.c
+++ b/net/packet/af_packet.c
@@ -743,7 +743,7 @@
if (len > dev->mtu+reserve)
goto out_unlock;
- skb = sock_alloc_send_skb(sk, len + LL_RESERVED_SPACE(dev),
+ skb = sock_alloc_send_skb(sk, len + LL_ALLOCATED_SPACE(dev),
msg->msg_flags & MSG_DONTWAIT, &err);
if (skb==NULL)
goto out_unlock;
diff --git a/net/sched/cls_api.c b/net/sched/cls_api.c
index 1086df7..9360fc8 100644
--- a/net/sched/cls_api.c
+++ b/net/sched/cls_api.c
@@ -220,7 +220,7 @@
tp = kzalloc(sizeof(*tp), GFP_KERNEL);
if (tp == NULL)
goto errout;
- err = -EINVAL;
+ err = -ENOENT;
tp_ops = tcf_proto_lookup_ops(tca[TCA_KIND]);
if (tp_ops == NULL) {
#ifdef CONFIG_KMOD
diff --git a/net/sched/sch_dsmark.c b/net/sched/sch_dsmark.c
index 0df911f..64465ba 100644
--- a/net/sched/sch_dsmark.c
+++ b/net/sched/sch_dsmark.c
@@ -444,7 +444,8 @@
return nla_nest_end(skb, opts);
nla_put_failure:
- return nla_nest_cancel(skb, opts);
+ nla_nest_cancel(skb, opts);
+ return -EMSGSIZE;
}
static int dsmark_dump(struct Qdisc *sch, struct sk_buff *skb)
@@ -466,7 +467,8 @@
return nla_nest_end(skb, opts);
nla_put_failure:
- return nla_nest_cancel(skb, opts);
+ nla_nest_cancel(skb, opts);
+ return -EMSGSIZE;
}
static const struct Qdisc_class_ops dsmark_class_ops = {
diff --git a/net/sched/sch_gred.c b/net/sched/sch_gred.c
index 3a9d226..c89fba5 100644
--- a/net/sched/sch_gred.c
+++ b/net/sched/sch_gred.c
@@ -582,7 +582,8 @@
return nla_nest_end(skb, opts);
nla_put_failure:
- return nla_nest_cancel(skb, opts);
+ nla_nest_cancel(skb, opts);
+ return -EMSGSIZE;
}
static void gred_destroy(struct Qdisc *sch)
diff --git a/net/sched/sch_hfsc.c b/net/sched/sch_hfsc.c
index 87293d0..fdfaa3f 100644
--- a/net/sched/sch_hfsc.c
+++ b/net/sched/sch_hfsc.c
@@ -1360,7 +1360,7 @@
nla_put_failure:
nla_nest_cancel(skb, nest);
- return -1;
+ return -EMSGSIZE;
}
static int
diff --git a/net/sched/sch_red.c b/net/sched/sch_red.c
index 3dcd493f4..5c56985 100644
--- a/net/sched/sch_red.c
+++ b/net/sched/sch_red.c
@@ -281,7 +281,8 @@
return nla_nest_end(skb, opts);
nla_put_failure:
- return nla_nest_cancel(skb, opts);
+ nla_nest_cancel(skb, opts);
+ return -EMSGSIZE;
}
static int red_dump_stats(struct Qdisc *sch, struct gnet_dump *d)
diff --git a/net/sctp/associola.c b/net/sctp/associola.c
index b4cd2b7..5326348 100644
--- a/net/sctp/associola.c
+++ b/net/sctp/associola.c
@@ -1203,6 +1203,9 @@
struct list_head *head = &asoc->peer.transport_addr_list;
struct list_head *pos;
+ if (asoc->peer.transport_count == 1)
+ return;
+
/* Find the next transport in a round-robin fashion. */
t = asoc->peer.retran_path;
pos = &t->transports;
@@ -1217,6 +1220,15 @@
t = list_entry(pos, struct sctp_transport, transports);
+ /* We have exhausted the list, but didn't find any
+ * other active transports. If so, use the next
+ * transport.
+ */
+ if (t == asoc->peer.retran_path) {
+ t = next;
+ break;
+ }
+
/* Try to find an active transport. */
if ((t->state == SCTP_ACTIVE) ||
@@ -1229,15 +1241,6 @@
if (!next)
next = t;
}
-
- /* We have exhausted the list, but didn't find any
- * other active transports. If so, use the next
- * transport.
- */
- if (t == asoc->peer.retran_path) {
- t = next;
- break;
- }
}
asoc->peer.retran_path = t;
diff --git a/net/sctp/ipv6.c b/net/sctp/ipv6.c
index e45e44c..a2f4d4d 100644
--- a/net/sctp/ipv6.c
+++ b/net/sctp/ipv6.c
@@ -299,7 +299,8 @@
/* Fills in the source address(saddr) based on the destination address(daddr)
* and asoc's bind address list.
*/
-static void sctp_v6_get_saddr(struct sctp_association *asoc,
+static void sctp_v6_get_saddr(struct sctp_sock *sk,
+ struct sctp_association *asoc,
struct dst_entry *dst,
union sctp_addr *daddr,
union sctp_addr *saddr)
@@ -318,7 +319,7 @@
if (!asoc) {
ipv6_dev_get_saddr(dst ? ip6_dst_idev(dst)->dev : NULL,
&daddr->v6.sin6_addr,
- inet6_sk(asoc->base.sk)->srcprefs,
+ inet6_sk(&sk->inet.sk)->srcprefs,
&saddr->v6.sin6_addr);
SCTP_DEBUG_PRINTK("saddr from ipv6_get_saddr: " NIP6_FMT "\n",
NIP6(saddr->v6.sin6_addr));
@@ -726,6 +727,11 @@
seq_printf(seq, NIP6_FMT " ", NIP6(addr->v6.sin6_addr));
}
+static void sctp_v6_ecn_capable(struct sock *sk)
+{
+ inet6_sk(sk)->tclass |= INET_ECN_ECT_0;
+}
+
/* Initialize a PF_INET6 socket msg_name. */
static void sctp_inet6_msgname(char *msgname, int *addr_len)
{
@@ -996,6 +1002,7 @@
.skb_iif = sctp_v6_skb_iif,
.is_ce = sctp_v6_is_ce,
.seq_dump_addr = sctp_v6_seq_dump_addr,
+ .ecn_capable = sctp_v6_ecn_capable,
.net_header_len = sizeof(struct ipv6hdr),
.sockaddr_len = sizeof(struct sockaddr_in6),
#ifdef CONFIG_COMPAT
diff --git a/net/sctp/output.c b/net/sctp/output.c
index cf4f9fb..6d45bae 100644
--- a/net/sctp/output.c
+++ b/net/sctp/output.c
@@ -548,7 +548,7 @@
* Note: The works for IPv6 layer checks this bit too later
* in transmission. See IP6_ECN_flow_xmit().
*/
- INET_ECN_xmit(nskb->sk);
+ (*tp->af_specific->ecn_capable)(nskb->sk);
/* Set up the IP options. */
/* BUG: not implemented
diff --git a/net/sctp/outqueue.c b/net/sctp/outqueue.c
index 59edfd2..ace6770 100644
--- a/net/sctp/outqueue.c
+++ b/net/sctp/outqueue.c
@@ -208,6 +208,7 @@
INIT_LIST_HEAD(&q->sacked);
INIT_LIST_HEAD(&q->abandoned);
+ q->fast_rtx = 0;
q->outstanding_bytes = 0;
q->empty = 1;
q->cork = 0;
@@ -500,6 +501,7 @@
case SCTP_RTXR_FAST_RTX:
SCTP_INC_STATS(SCTP_MIB_FAST_RETRANSMITS);
sctp_transport_lower_cwnd(transport, SCTP_LOWER_CWND_FAST_RTX);
+ q->fast_rtx = 1;
break;
case SCTP_RTXR_PMTUD:
SCTP_INC_STATS(SCTP_MIB_PMTUD_RETRANSMITS);
@@ -518,9 +520,15 @@
* the sender SHOULD try to advance the "Advanced.Peer.Ack.Point" by
* following the procedures outlined in C1 - C5.
*/
- sctp_generate_fwdtsn(q, q->asoc->ctsn_ack_point);
+ if (reason == SCTP_RTXR_T3_RTX)
+ sctp_generate_fwdtsn(q, q->asoc->ctsn_ack_point);
- error = sctp_outq_flush(q, /* rtx_timeout */ 1);
+ /* Flush the queues only on timeout, since fast_rtx is only
+ * triggered during sack processing and the queue
+ * will be flushed at the end.
+ */
+ if (reason != SCTP_RTXR_FAST_RTX)
+ error = sctp_outq_flush(q, /* rtx_timeout */ 1);
if (error)
q->asoc->base.sk->sk_err = -error;
@@ -538,17 +546,23 @@
int rtx_timeout, int *start_timer)
{
struct list_head *lqueue;
- struct list_head *lchunk;
struct sctp_transport *transport = pkt->transport;
sctp_xmit_t status;
struct sctp_chunk *chunk, *chunk1;
struct sctp_association *asoc;
+ int fast_rtx;
int error = 0;
+ int timer = 0;
+ int done = 0;
asoc = q->asoc;
lqueue = &q->retransmit;
+ fast_rtx = q->fast_rtx;
- /* RFC 2960 6.3.3 Handle T3-rtx Expiration
+ /* This loop handles time-out retransmissions, fast retransmissions,
+ * and retransmissions due to opening of whindow.
+ *
+ * RFC 2960 6.3.3 Handle T3-rtx Expiration
*
* E3) Determine how many of the earliest (i.e., lowest TSN)
* outstanding DATA chunks for the address for which the
@@ -563,12 +577,12 @@
* [Just to be painfully clear, if we are retransmitting
* because a timeout just happened, we should send only ONE
* packet of retransmitted data.]
+ *
+ * For fast retransmissions we also send only ONE packet. However,
+ * if we are just flushing the queue due to open window, we'll
+ * try to send as much as possible.
*/
- lchunk = sctp_list_dequeue(lqueue);
-
- while (lchunk) {
- chunk = list_entry(lchunk, struct sctp_chunk,
- transmitted_list);
+ list_for_each_entry_safe(chunk, chunk1, lqueue, transmitted_list) {
/* Make sure that Gap Acked TSNs are not retransmitted. A
* simple approach is just to move such TSNs out of the
@@ -576,58 +590,60 @@
* next chunk.
*/
if (chunk->tsn_gap_acked) {
- list_add_tail(lchunk, &transport->transmitted);
- lchunk = sctp_list_dequeue(lqueue);
+ list_del(&chunk->transmitted_list);
+ list_add_tail(&chunk->transmitted_list,
+ &transport->transmitted);
continue;
}
+ /* If we are doing fast retransmit, ignore non-fast_rtransmit
+ * chunks
+ */
+ if (fast_rtx && !chunk->fast_retransmit)
+ continue;
+
/* Attempt to append this chunk to the packet. */
status = sctp_packet_append_chunk(pkt, chunk);
switch (status) {
case SCTP_XMIT_PMTU_FULL:
/* Send this packet. */
- if ((error = sctp_packet_transmit(pkt)) == 0)
- *start_timer = 1;
+ error = sctp_packet_transmit(pkt);
/* If we are retransmitting, we should only
* send a single packet.
*/
- if (rtx_timeout) {
- list_add(lchunk, lqueue);
- lchunk = NULL;
- }
+ if (rtx_timeout || fast_rtx)
+ done = 1;
- /* Bundle lchunk in the next round. */
+ /* Bundle next chunk in the next round. */
break;
case SCTP_XMIT_RWND_FULL:
/* Send this packet. */
- if ((error = sctp_packet_transmit(pkt)) == 0)
- *start_timer = 1;
+ error = sctp_packet_transmit(pkt);
/* Stop sending DATA as there is no more room
* at the receiver.
*/
- list_add(lchunk, lqueue);
- lchunk = NULL;
+ done = 1;
break;
case SCTP_XMIT_NAGLE_DELAY:
/* Send this packet. */
- if ((error = sctp_packet_transmit(pkt)) == 0)
- *start_timer = 1;
+ error = sctp_packet_transmit(pkt);
/* Stop sending DATA because of nagle delay. */
- list_add(lchunk, lqueue);
- lchunk = NULL;
+ done = 1;
break;
default:
/* The append was successful, so add this chunk to
* the transmitted list.
*/
- list_add_tail(lchunk, &transport->transmitted);
+ list_del(&chunk->transmitted_list);
+ list_add_tail(&chunk->transmitted_list,
+ &transport->transmitted);
/* Mark the chunk as ineligible for fast retransmit
* after it is retransmitted.
@@ -635,27 +651,44 @@
if (chunk->fast_retransmit > 0)
chunk->fast_retransmit = -1;
- *start_timer = 1;
- q->empty = 0;
+ /* Force start T3-rtx timer when fast retransmitting
+ * the earliest outstanding TSN
+ */
+ if (!timer && fast_rtx &&
+ ntohl(chunk->subh.data_hdr->tsn) ==
+ asoc->ctsn_ack_point + 1)
+ timer = 2;
- /* Retrieve a new chunk to bundle. */
- lchunk = sctp_list_dequeue(lqueue);
+ q->empty = 0;
break;
}
- /* If we are here due to a retransmit timeout or a fast
- * retransmit and if there are any chunks left in the retransmit
- * queue that could not fit in the PMTU sized packet, they need
- * to be marked as ineligible for a subsequent fast retransmit.
- */
- if (rtx_timeout && !lchunk) {
- list_for_each_entry(chunk1, lqueue, transmitted_list) {
- if (chunk1->fast_retransmit > 0)
- chunk1->fast_retransmit = -1;
- }
+ /* Set the timer if there were no errors */
+ if (!error && !timer)
+ timer = 1;
+
+ if (done)
+ break;
+ }
+
+ /* If we are here due to a retransmit timeout or a fast
+ * retransmit and if there are any chunks left in the retransmit
+ * queue that could not fit in the PMTU sized packet, they need
+ * to be marked as ineligible for a subsequent fast retransmit.
+ */
+ if (rtx_timeout || fast_rtx) {
+ list_for_each_entry(chunk1, lqueue, transmitted_list) {
+ if (chunk1->fast_retransmit > 0)
+ chunk1->fast_retransmit = -1;
}
}
+ *start_timer = timer;
+
+ /* Clear fast retransmit hint */
+ if (fast_rtx)
+ q->fast_rtx = 0;
+
return error;
}
@@ -862,7 +895,8 @@
rtx_timeout, &start_timer);
if (start_timer)
- sctp_transport_reset_timers(transport);
+ sctp_transport_reset_timers(transport,
+ start_timer-1);
/* This can happen on COOKIE-ECHO resend. Only
* one chunk can get bundled with a COOKIE-ECHO.
@@ -977,7 +1011,7 @@
list_add_tail(&chunk->transmitted_list,
&transport->transmitted);
- sctp_transport_reset_timers(transport);
+ sctp_transport_reset_timers(transport, start_timer-1);
q->empty = 0;
diff --git a/net/sctp/protocol.c b/net/sctp/protocol.c
index 0ec234b..b435a19 100644
--- a/net/sctp/protocol.c
+++ b/net/sctp/protocol.c
@@ -470,11 +470,11 @@
/* Walk through the bind address list and look for a bind
* address that matches the source address of the returned dst.
*/
+ sctp_v4_dst_saddr(&dst_saddr, dst, htons(bp->port));
rcu_read_lock();
list_for_each_entry_rcu(laddr, &bp->address_list, list) {
if (!laddr->valid || (laddr->state != SCTP_ADDR_SRC))
continue;
- sctp_v4_dst_saddr(&dst_saddr, dst, htons(bp->port));
if (sctp_v4_cmp_addr(&dst_saddr, &laddr->a))
goto out_unlock;
}
@@ -519,7 +519,8 @@
/* For v4, the source address is cached in the route entry(dst). So no need
* to cache it separately and hence this is an empty routine.
*/
-static void sctp_v4_get_saddr(struct sctp_association *asoc,
+static void sctp_v4_get_saddr(struct sctp_sock *sk,
+ struct sctp_association *asoc,
struct dst_entry *dst,
union sctp_addr *daddr,
union sctp_addr *saddr)
@@ -616,6 +617,11 @@
seq_printf(seq, "%d.%d.%d.%d ", NIPQUAD(addr->v4.sin_addr));
}
+static void sctp_v4_ecn_capable(struct sock *sk)
+{
+ INET_ECN_xmit(sk);
+}
+
/* Event handler for inet address addition/deletion events.
* The sctp_local_addr_list needs to be protocted by a spin lock since
* multiple notifiers (say IPv4 and IPv6) may be running at the same
@@ -934,6 +940,7 @@
.skb_iif = sctp_v4_skb_iif,
.is_ce = sctp_v4_is_ce,
.seq_dump_addr = sctp_v4_seq_dump_addr,
+ .ecn_capable = sctp_v4_ecn_capable,
.net_header_len = sizeof(struct iphdr),
.sockaddr_len = sizeof(struct sockaddr_in),
#ifdef CONFIG_COMPAT
diff --git a/net/sctp/sm_make_chunk.c b/net/sctp/sm_make_chunk.c
index 81b6064..bbc7107 100644
--- a/net/sctp/sm_make_chunk.c
+++ b/net/sctp/sm_make_chunk.c
@@ -2418,7 +2418,8 @@
break;
case SCTP_PARAM_IPV6_ADDRESS:
- asoc->peer.ipv6_address = 1;
+ if (PF_INET6 == asoc->base.sk->sk_family)
+ asoc->peer.ipv6_address = 1;
break;
case SCTP_PARAM_HOST_NAME_ADDRESS:
@@ -2829,6 +2830,19 @@
addr_param = (union sctp_addr_param *)
((void *)asconf_param + sizeof(sctp_addip_param_t));
+ switch (addr_param->v4.param_hdr.type) {
+ case SCTP_PARAM_IPV6_ADDRESS:
+ if (!asoc->peer.ipv6_address)
+ return SCTP_ERROR_INV_PARAM;
+ break;
+ case SCTP_PARAM_IPV4_ADDRESS:
+ if (!asoc->peer.ipv4_address)
+ return SCTP_ERROR_INV_PARAM;
+ break;
+ default:
+ return SCTP_ERROR_INV_PARAM;
+ }
+
af = sctp_get_af_specific(param_type2af(addr_param->v4.param_hdr.type));
if (unlikely(!af))
return SCTP_ERROR_INV_PARAM;
diff --git a/net/sctp/transport.c b/net/sctp/transport.c
index f4938f6..3f34f61 100644
--- a/net/sctp/transport.c
+++ b/net/sctp/transport.c
@@ -79,6 +79,7 @@
peer->rttvar = 0;
peer->srtt = 0;
peer->rto_pending = 0;
+ peer->fast_recovery = 0;
peer->last_time_heard = jiffies;
peer->last_time_used = jiffies;
@@ -190,7 +191,7 @@
/* Start T3_rtx timer if it is not already running and update the heartbeat
* timer. This routine is called every time a DATA chunk is sent.
*/
-void sctp_transport_reset_timers(struct sctp_transport *transport)
+void sctp_transport_reset_timers(struct sctp_transport *transport, int force)
{
/* RFC 2960 6.3.2 Retransmission Timer Rules
*
@@ -200,7 +201,7 @@
* address.
*/
- if (!timer_pending(&transport->T3_rtx_timer))
+ if (force || !timer_pending(&transport->T3_rtx_timer))
if (!mod_timer(&transport->T3_rtx_timer,
jiffies + transport->rto))
sctp_transport_hold(transport);
@@ -291,7 +292,7 @@
if (saddr)
memcpy(&transport->saddr, saddr, sizeof(union sctp_addr));
else
- af->get_saddr(asoc, dst, daddr, &transport->saddr);
+ af->get_saddr(opt, asoc, dst, daddr, &transport->saddr);
transport->dst = dst;
if ((transport->param_flags & SPP_PMTUD_DISABLE) && transport->pathmtu) {
@@ -403,11 +404,16 @@
cwnd = transport->cwnd;
flight_size = transport->flight_size;
+ /* See if we need to exit Fast Recovery first */
+ if (transport->fast_recovery &&
+ TSN_lte(transport->fast_recovery_exit, sack_ctsn))
+ transport->fast_recovery = 0;
+
/* The appropriate cwnd increase algorithm is performed if, and only
- * if the cumulative TSN has advanced and the congestion window is
+ * if the cumulative TSN whould advanced and the congestion window is
* being fully utilized.
*/
- if ((transport->asoc->ctsn_ack_point >= sack_ctsn) ||
+ if (TSN_lte(sack_ctsn, transport->asoc->ctsn_ack_point) ||
(flight_size < cwnd))
return;
@@ -416,17 +422,23 @@
pmtu = transport->asoc->pathmtu;
if (cwnd <= ssthresh) {
- /* RFC 2960 7.2.1, sctpimpguide-05 2.14.2 When cwnd is less
- * than or equal to ssthresh an SCTP endpoint MUST use the
- * slow start algorithm to increase cwnd only if the current
- * congestion window is being fully utilized and an incoming
- * SACK advances the Cumulative TSN Ack Point. Only when these
- * two conditions are met can the cwnd be increased otherwise
- * the cwnd MUST not be increased. If these conditions are met
- * then cwnd MUST be increased by at most the lesser of
- * 1) the total size of the previously outstanding DATA
- * chunk(s) acknowledged, and 2) the destination's path MTU.
+ /* RFC 4960 7.2.1
+ * o When cwnd is less than or equal to ssthresh, an SCTP
+ * endpoint MUST use the slow-start algorithm to increase
+ * cwnd only if the current congestion window is being fully
+ * utilized, an incoming SACK advances the Cumulative TSN
+ * Ack Point, and the data sender is not in Fast Recovery.
+ * Only when these three conditions are met can the cwnd be
+ * increased; otherwise, the cwnd MUST not be increased.
+ * If these conditions are met, then cwnd MUST be increased
+ * by, at most, the lesser of 1) the total size of the
+ * previously outstanding DATA chunk(s) acknowledged, and
+ * 2) the destination's path MTU. This upper bound protects
+ * against the ACK-Splitting attack outlined in [SAVAGE99].
*/
+ if (transport->fast_recovery)
+ return;
+
if (bytes_acked > pmtu)
cwnd += pmtu;
else
@@ -502,6 +514,13 @@
* cwnd = ssthresh
* partial_bytes_acked = 0
*/
+ if (transport->fast_recovery)
+ return;
+
+ /* Mark Fast recovery */
+ transport->fast_recovery = 1;
+ transport->fast_recovery_exit = transport->asoc->next_tsn - 1;
+
transport->ssthresh = max(transport->cwnd/2,
4*transport->asoc->pathmtu);
transport->cwnd = transport->ssthresh;
@@ -586,6 +605,7 @@
t->flight_size = 0;
t->error_count = 0;
t->rto_pending = 0;
+ t->fast_recovery = 0;
/* Initialize the state information for SFR-CACC */
t->cacc.changeover_active = 0;
diff --git a/net/sunrpc/auth_generic.c b/net/sunrpc/auth_generic.c
index d927d9f..744b79f 100644
--- a/net/sunrpc/auth_generic.c
+++ b/net/sunrpc/auth_generic.c
@@ -17,8 +17,8 @@
# define RPCDBG_FACILITY RPCDBG_AUTH
#endif
-#define RPC_ANONYMOUS_USERID ((uid_t)-2)
-#define RPC_ANONYMOUS_GROUPID ((gid_t)-2)
+#define RPC_MACHINE_CRED_USERID ((uid_t)0)
+#define RPC_MACHINE_CRED_GROUPID ((gid_t)0)
struct generic_cred {
struct rpc_cred gc_base;
@@ -44,8 +44,8 @@
struct rpc_cred *rpc_lookup_machine_cred(void)
{
struct auth_cred acred = {
- .uid = RPC_ANONYMOUS_USERID,
- .gid = RPC_ANONYMOUS_GROUPID,
+ .uid = RPC_MACHINE_CRED_USERID,
+ .gid = RPC_MACHINE_CRED_GROUPID,
.machine_cred = 1,
};
diff --git a/net/sunrpc/svc_xprt.c b/net/sunrpc/svc_xprt.c
index d8e8d79..e46c825 100644
--- a/net/sunrpc/svc_xprt.c
+++ b/net/sunrpc/svc_xprt.c
@@ -6,30 +6,9 @@
#include <linux/sched.h>
#include <linux/errno.h>
-#include <linux/fcntl.h>
-#include <linux/net.h>
-#include <linux/in.h>
-#include <linux/inet.h>
-#include <linux/udp.h>
-#include <linux/tcp.h>
-#include <linux/unistd.h>
-#include <linux/slab.h>
-#include <linux/netdevice.h>
-#include <linux/skbuff.h>
-#include <linux/file.h>
#include <linux/freezer.h>
#include <linux/kthread.h>
#include <net/sock.h>
-#include <net/checksum.h>
-#include <net/ip.h>
-#include <net/ipv6.h>
-#include <net/tcp_states.h>
-#include <linux/uaccess.h>
-#include <asm/ioctls.h>
-
-#include <linux/sunrpc/types.h>
-#include <linux/sunrpc/clnt.h>
-#include <linux/sunrpc/xdr.h>
#include <linux/sunrpc/stats.h>
#include <linux/sunrpc/svc_xprt.h>
@@ -296,8 +275,6 @@
if (!(xprt->xpt_flags &
((1<<XPT_CONN)|(1<<XPT_DATA)|(1<<XPT_CLOSE)|(1<<XPT_DEFERRED))))
return;
- if (test_bit(XPT_DEAD, &xprt->xpt_flags))
- return;
cpu = get_cpu();
pool = svc_pool_for_cpu(xprt->xpt_server, cpu);
diff --git a/net/sunrpc/svcauth_unix.c b/net/sunrpc/svcauth_unix.c
index 3f30ee6..f24800f 100644
--- a/net/sunrpc/svcauth_unix.c
+++ b/net/sunrpc/svcauth_unix.c
@@ -278,7 +278,7 @@
dom = im->m_client->h.name;
if (ipv6_addr_v4mapped(&addr)) {
- seq_printf(m, "%s" NIPQUAD_FMT "%s\n",
+ seq_printf(m, "%s " NIPQUAD_FMT " %s\n",
im->m_class,
ntohl(addr.s6_addr32[3]) >> 24 & 0xff,
ntohl(addr.s6_addr32[3]) >> 16 & 0xff,
@@ -286,7 +286,7 @@
ntohl(addr.s6_addr32[3]) >> 0 & 0xff,
dom);
} else {
- seq_printf(m, "%s" NIP6_FMT "%s\n",
+ seq_printf(m, "%s " NIP6_FMT " %s\n",
im->m_class, NIP6(addr), dom);
}
return 0;
diff --git a/net/sunrpc/xprtrdma/svc_rdma_recvfrom.c b/net/sunrpc/xprtrdma/svc_rdma_recvfrom.c
index c22d6b6..06ab484 100644
--- a/net/sunrpc/xprtrdma/svc_rdma_recvfrom.c
+++ b/net/sunrpc/xprtrdma/svc_rdma_recvfrom.c
@@ -260,11 +260,16 @@
* On our side, we need to read into a pagelist. The first page immediately
* follows the RPC header.
*
- * This function returns 1 to indicate success. The data is not yet in
+ * This function returns:
+ * 0 - No error and no read-list found.
+ *
+ * 1 - Successful read-list processing. The data is not yet in
* the pagelist and therefore the RPC request must be deferred. The
* I/O completion will enqueue the transport again and
* svc_rdma_recvfrom will complete the request.
*
+ * <0 - Error processing/posting read-list.
+ *
* NOTE: The ctxt must not be touched after the last WR has been posted
* because the I/O completion processing may occur on another
* processor and free / modify the context. Ne touche pas!
@@ -284,7 +289,6 @@
u64 sgl_offset;
struct rpcrdma_read_chunk *ch;
struct svc_rdma_op_ctxt *ctxt = NULL;
- struct svc_rdma_op_ctxt *head;
struct svc_rdma_op_ctxt *tmp_sge_ctxt;
struct svc_rdma_op_ctxt *tmp_ch_ctxt;
struct chunk_sge *ch_sge_ary;
@@ -302,25 +306,19 @@
ch_sge_ary = (struct chunk_sge *)tmp_ch_ctxt->sge;
svc_rdma_rcl_chunk_counts(ch, &ch_count, &byte_count);
+ if (ch_count > RPCSVC_MAXPAGES)
+ return -EINVAL;
sge_count = rdma_rcl_to_sge(xprt, rqstp, hdr_ctxt, rmsgp,
sge, ch_sge_ary,
ch_count, byte_count);
- head = svc_rdma_get_context(xprt);
sgl_offset = 0;
ch_no = 0;
for (ch = (struct rpcrdma_read_chunk *)&rmsgp->rm_body.rm_chunks[0];
ch->rc_discrim != 0; ch++, ch_no++) {
next_sge:
- if (!ctxt)
- ctxt = head;
- else {
- ctxt->next = svc_rdma_get_context(xprt);
- ctxt = ctxt->next;
- }
- ctxt->next = NULL;
+ ctxt = svc_rdma_get_context(xprt);
ctxt->direction = DMA_FROM_DEVICE;
- clear_bit(RDMACTXT_F_READ_DONE, &ctxt->flags);
clear_bit(RDMACTXT_F_LAST_CTXT, &ctxt->flags);
/* Prepare READ WR */
@@ -347,20 +345,15 @@
* the client and the RPC needs to be enqueued.
*/
set_bit(RDMACTXT_F_LAST_CTXT, &ctxt->flags);
- ctxt->next = hdr_ctxt;
- hdr_ctxt->next = head;
+ ctxt->read_hdr = hdr_ctxt;
}
/* Post the read */
err = svc_rdma_send(xprt, &read_wr);
if (err) {
- printk(KERN_ERR "svcrdma: Error posting send = %d\n",
+ printk(KERN_ERR "svcrdma: Error %d posting RDMA_READ\n",
err);
- /*
- * Break the circular list so free knows when
- * to stop if the error happened to occur on
- * the last read
- */
- ctxt->next = NULL;
+ set_bit(XPT_CLOSE, &xprt->sc_xprt.xpt_flags);
+ svc_rdma_put_context(ctxt, 0);
goto out;
}
atomic_inc(&rdma_stat_read);
@@ -371,7 +364,7 @@
goto next_sge;
}
sgl_offset = 0;
- err = 0;
+ err = 1;
}
out:
@@ -389,25 +382,12 @@
while (rqstp->rq_resused)
rqstp->rq_respages[--rqstp->rq_resused] = NULL;
- if (err) {
- printk(KERN_ERR "svcrdma : RDMA_READ error = %d\n", err);
- set_bit(XPT_CLOSE, &xprt->sc_xprt.xpt_flags);
- /* Free the linked list of read contexts */
- while (head != NULL) {
- ctxt = head->next;
- svc_rdma_put_context(head, 1);
- head = ctxt;
- }
- return 0;
- }
-
- return 1;
+ return err;
}
static int rdma_read_complete(struct svc_rqst *rqstp,
- struct svc_rdma_op_ctxt *data)
+ struct svc_rdma_op_ctxt *head)
{
- struct svc_rdma_op_ctxt *head = data->next;
int page_no;
int ret;
@@ -433,21 +413,12 @@
rqstp->rq_arg.len = head->arg.len;
rqstp->rq_arg.buflen = head->arg.buflen;
+ /* Free the context */
+ svc_rdma_put_context(head, 0);
+
/* XXX: What should this be? */
rqstp->rq_prot = IPPROTO_MAX;
-
- /*
- * Free the contexts we used to build the RDMA_READ. We have
- * to be careful here because the context list uses the same
- * next pointer used to chain the contexts associated with the
- * RDMA_READ
- */
- data->next = NULL; /* terminate circular list */
- do {
- data = head->next;
- svc_rdma_put_context(head, 0);
- head = data;
- } while (head != NULL);
+ svc_xprt_copy_addrs(rqstp, rqstp->rq_xprt);
ret = rqstp->rq_arg.head[0].iov_len
+ rqstp->rq_arg.page_len
@@ -457,8 +428,6 @@
ret, rqstp->rq_arg.len, rqstp->rq_arg.head[0].iov_base,
rqstp->rq_arg.head[0].iov_len);
- /* Indicate that we've consumed an RQ credit */
- rqstp->rq_xprt_ctxt = rqstp->rq_xprt;
svc_xprt_received(rqstp->rq_xprt);
return ret;
}
@@ -480,13 +449,6 @@
dprintk("svcrdma: rqstp=%p\n", rqstp);
- /*
- * The rq_xprt_ctxt indicates if we've consumed an RQ credit
- * or not. It is used in the rdma xpo_release_rqst function to
- * determine whether or not to return an RQ WQE to the RQ.
- */
- rqstp->rq_xprt_ctxt = NULL;
-
spin_lock_bh(&rdma_xprt->sc_read_complete_lock);
if (!list_empty(&rdma_xprt->sc_read_complete_q)) {
ctxt = list_entry(rdma_xprt->sc_read_complete_q.next,
@@ -537,21 +499,22 @@
/* If the request is invalid, reply with an error */
if (len < 0) {
if (len == -ENOSYS)
- (void)svc_rdma_send_error(rdma_xprt, rmsgp, ERR_VERS);
+ svc_rdma_send_error(rdma_xprt, rmsgp, ERR_VERS);
goto close_out;
}
- /* Read read-list data. If we would need to wait, defer
- * it. Not that in this case, we don't return the RQ credit
- * until after the read completes.
- */
- if (rdma_read_xdr(rdma_xprt, rmsgp, rqstp, ctxt)) {
+ /* Read read-list data. */
+ ret = rdma_read_xdr(rdma_xprt, rmsgp, rqstp, ctxt);
+ if (ret > 0) {
+ /* read-list posted, defer until data received from client. */
svc_xprt_received(xprt);
return 0;
}
-
- /* Indicate we've consumed an RQ credit */
- rqstp->rq_xprt_ctxt = rqstp->rq_xprt;
+ if (ret < 0) {
+ /* Post of read-list failed, free context. */
+ svc_rdma_put_context(ctxt, 1);
+ return 0;
+ }
ret = rqstp->rq_arg.head[0].iov_len
+ rqstp->rq_arg.page_len
@@ -569,11 +532,8 @@
return ret;
close_out:
- if (ctxt) {
+ if (ctxt)
svc_rdma_put_context(ctxt, 1);
- /* Indicate we've consumed an RQ credit */
- rqstp->rq_xprt_ctxt = rqstp->rq_xprt;
- }
dprintk("svcrdma: transport %p is closing\n", xprt);
/*
* Set the close bit and enqueue it. svc_recv will see the
diff --git a/net/sunrpc/xprtrdma/svc_rdma_sendto.c b/net/sunrpc/xprtrdma/svc_rdma_sendto.c
index 981f190..fb82b1b 100644
--- a/net/sunrpc/xprtrdma/svc_rdma_sendto.c
+++ b/net/sunrpc/xprtrdma/svc_rdma_sendto.c
@@ -389,6 +389,17 @@
int page_no;
int ret;
+ /* Post a recv buffer to handle another request. */
+ ret = svc_rdma_post_recv(rdma);
+ if (ret) {
+ printk(KERN_INFO
+ "svcrdma: could not post a receive buffer, err=%d."
+ "Closing transport %p.\n", ret, rdma);
+ set_bit(XPT_CLOSE, &rdma->sc_xprt.xpt_flags);
+ svc_rdma_put_context(ctxt, 0);
+ return -ENOTCONN;
+ }
+
/* Prepare the context */
ctxt->pages[0] = page;
ctxt->count = 1;
diff --git a/net/sunrpc/xprtrdma/svc_rdma_transport.c b/net/sunrpc/xprtrdma/svc_rdma_transport.c
index af408fc..e132509 100644
--- a/net/sunrpc/xprtrdma/svc_rdma_transport.c
+++ b/net/sunrpc/xprtrdma/svc_rdma_transport.c
@@ -103,8 +103,8 @@
spin_lock_bh(&xprt->sc_ctxt_lock);
if (ctxt) {
at_least_one = 1;
- ctxt->next = xprt->sc_ctxt_head;
- xprt->sc_ctxt_head = ctxt;
+ INIT_LIST_HEAD(&ctxt->free_list);
+ list_add(&ctxt->free_list, &xprt->sc_ctxt_free);
} else {
/* kmalloc failed...give up for now */
xprt->sc_ctxt_cnt--;
@@ -123,7 +123,7 @@
while (1) {
spin_lock_bh(&xprt->sc_ctxt_lock);
- if (unlikely(xprt->sc_ctxt_head == NULL)) {
+ if (unlikely(list_empty(&xprt->sc_ctxt_free))) {
/* Try to bump my cache. */
spin_unlock_bh(&xprt->sc_ctxt_lock);
@@ -136,12 +136,15 @@
schedule_timeout_uninterruptible(msecs_to_jiffies(500));
continue;
}
- ctxt = xprt->sc_ctxt_head;
- xprt->sc_ctxt_head = ctxt->next;
+ ctxt = list_entry(xprt->sc_ctxt_free.next,
+ struct svc_rdma_op_ctxt,
+ free_list);
+ list_del_init(&ctxt->free_list);
spin_unlock_bh(&xprt->sc_ctxt_lock);
ctxt->xprt = xprt;
INIT_LIST_HEAD(&ctxt->dto_q);
ctxt->count = 0;
+ atomic_inc(&xprt->sc_ctxt_used);
break;
}
return ctxt;
@@ -159,14 +162,15 @@
put_page(ctxt->pages[i]);
for (i = 0; i < ctxt->count; i++)
- dma_unmap_single(xprt->sc_cm_id->device->dma_device,
- ctxt->sge[i].addr,
- ctxt->sge[i].length,
- ctxt->direction);
+ ib_dma_unmap_single(xprt->sc_cm_id->device,
+ ctxt->sge[i].addr,
+ ctxt->sge[i].length,
+ ctxt->direction);
+
spin_lock_bh(&xprt->sc_ctxt_lock);
- ctxt->next = xprt->sc_ctxt_head;
- xprt->sc_ctxt_head = ctxt;
+ list_add(&ctxt->free_list, &xprt->sc_ctxt_free);
spin_unlock_bh(&xprt->sc_ctxt_lock);
+ atomic_dec(&xprt->sc_ctxt_used);
}
/* ib_cq event handler */
@@ -228,23 +232,8 @@
list_del_init(&xprt->sc_dto_q);
spin_unlock_irqrestore(&dto_lock, flags);
- if (test_and_clear_bit(RDMAXPRT_RQ_PENDING, &xprt->sc_flags)) {
- ib_req_notify_cq(xprt->sc_rq_cq, IB_CQ_NEXT_COMP);
- rq_cq_reap(xprt);
- set_bit(XPT_DATA, &xprt->sc_xprt.xpt_flags);
- /*
- * If data arrived before established event,
- * don't enqueue. This defers RPC I/O until the
- * RDMA connection is complete.
- */
- if (!test_bit(RDMAXPRT_CONN_PENDING, &xprt->sc_flags))
- svc_xprt_enqueue(&xprt->sc_xprt);
- }
-
- if (test_and_clear_bit(RDMAXPRT_SQ_PENDING, &xprt->sc_flags)) {
- ib_req_notify_cq(xprt->sc_sq_cq, IB_CQ_NEXT_COMP);
- sq_cq_reap(xprt);
- }
+ rq_cq_reap(xprt);
+ sq_cq_reap(xprt);
svc_xprt_put(&xprt->sc_xprt);
spin_lock_irqsave(&dto_lock, flags);
@@ -263,11 +252,15 @@
struct svcxprt_rdma *xprt = cq_context;
unsigned long flags;
+ /* Guard against unconditional flush call for destroyed QP */
+ if (atomic_read(&xprt->sc_xprt.xpt_ref.refcount)==0)
+ return;
+
/*
* Set the bit regardless of whether or not it's on the list
* because it may be on the list already due to an SQ
* completion.
- */
+ */
set_bit(RDMAXPRT_RQ_PENDING, &xprt->sc_flags);
/*
@@ -290,6 +283,8 @@
*
* Take all completing WC off the CQE and enqueue the associated DTO
* context on the dto_q for the transport.
+ *
+ * Note that caller must hold a transport reference.
*/
static void rq_cq_reap(struct svcxprt_rdma *xprt)
{
@@ -297,29 +292,47 @@
struct ib_wc wc;
struct svc_rdma_op_ctxt *ctxt = NULL;
+ if (!test_and_clear_bit(RDMAXPRT_RQ_PENDING, &xprt->sc_flags))
+ return;
+
+ ib_req_notify_cq(xprt->sc_rq_cq, IB_CQ_NEXT_COMP);
atomic_inc(&rdma_stat_rq_poll);
- spin_lock_bh(&xprt->sc_rq_dto_lock);
while ((ret = ib_poll_cq(xprt->sc_rq_cq, 1, &wc)) > 0) {
ctxt = (struct svc_rdma_op_ctxt *)(unsigned long)wc.wr_id;
ctxt->wc_status = wc.status;
ctxt->byte_len = wc.byte_len;
if (wc.status != IB_WC_SUCCESS) {
/* Close the transport */
+ dprintk("svcrdma: transport closing putting ctxt %p\n", ctxt);
set_bit(XPT_CLOSE, &xprt->sc_xprt.xpt_flags);
svc_rdma_put_context(ctxt, 1);
+ svc_xprt_put(&xprt->sc_xprt);
continue;
}
+ spin_lock_bh(&xprt->sc_rq_dto_lock);
list_add_tail(&ctxt->dto_q, &xprt->sc_rq_dto_q);
+ spin_unlock_bh(&xprt->sc_rq_dto_lock);
+ svc_xprt_put(&xprt->sc_xprt);
}
- spin_unlock_bh(&xprt->sc_rq_dto_lock);
if (ctxt)
atomic_inc(&rdma_stat_rq_prod);
+
+ set_bit(XPT_DATA, &xprt->sc_xprt.xpt_flags);
+ /*
+ * If data arrived before established event,
+ * don't enqueue. This defers RPC I/O until the
+ * RDMA connection is complete.
+ */
+ if (!test_bit(RDMAXPRT_CONN_PENDING, &xprt->sc_flags))
+ svc_xprt_enqueue(&xprt->sc_xprt);
}
/*
* Send Queue Completion Handler - potentially called on interrupt context.
+ *
+ * Note that caller must hold a transport reference.
*/
static void sq_cq_reap(struct svcxprt_rdma *xprt)
{
@@ -328,6 +341,11 @@
struct ib_cq *cq = xprt->sc_sq_cq;
int ret;
+
+ if (!test_and_clear_bit(RDMAXPRT_SQ_PENDING, &xprt->sc_flags))
+ return;
+
+ ib_req_notify_cq(xprt->sc_sq_cq, IB_CQ_NEXT_COMP);
atomic_inc(&rdma_stat_sq_poll);
while ((ret = ib_poll_cq(cq, 1, &wc)) > 0) {
ctxt = (struct svc_rdma_op_ctxt *)(unsigned long)wc.wr_id;
@@ -349,14 +367,16 @@
case IB_WR_RDMA_READ:
if (test_bit(RDMACTXT_F_LAST_CTXT, &ctxt->flags)) {
+ struct svc_rdma_op_ctxt *read_hdr = ctxt->read_hdr;
+ BUG_ON(!read_hdr);
set_bit(XPT_DATA, &xprt->sc_xprt.xpt_flags);
- set_bit(RDMACTXT_F_READ_DONE, &ctxt->flags);
spin_lock_bh(&xprt->sc_read_complete_lock);
- list_add_tail(&ctxt->dto_q,
+ list_add_tail(&read_hdr->dto_q,
&xprt->sc_read_complete_q);
spin_unlock_bh(&xprt->sc_read_complete_lock);
svc_xprt_enqueue(&xprt->sc_xprt);
}
+ svc_rdma_put_context(ctxt, 0);
break;
default:
@@ -365,6 +385,7 @@
wc.opcode, wc.status);
break;
}
+ svc_xprt_put(&xprt->sc_xprt);
}
if (ctxt)
@@ -376,11 +397,15 @@
struct svcxprt_rdma *xprt = cq_context;
unsigned long flags;
+ /* Guard against unconditional flush call for destroyed QP */
+ if (atomic_read(&xprt->sc_xprt.xpt_ref.refcount)==0)
+ return;
+
/*
* Set the bit regardless of whether or not it's on the list
* because it may be on the list already due to an RQ
* completion.
- */
+ */
set_bit(RDMAXPRT_SQ_PENDING, &xprt->sc_flags);
/*
@@ -407,28 +432,29 @@
xprt->sc_ctxt_max = ctxt_max;
xprt->sc_ctxt_bump = ctxt_bump;
xprt->sc_ctxt_cnt = 0;
- xprt->sc_ctxt_head = NULL;
+ atomic_set(&xprt->sc_ctxt_used, 0);
+
+ INIT_LIST_HEAD(&xprt->sc_ctxt_free);
for (i = 0; i < ctxt_count; i++) {
ctxt = kmalloc(sizeof(*ctxt), GFP_KERNEL);
if (ctxt) {
- ctxt->next = xprt->sc_ctxt_head;
- xprt->sc_ctxt_head = ctxt;
+ INIT_LIST_HEAD(&ctxt->free_list);
+ list_add(&ctxt->free_list, &xprt->sc_ctxt_free);
xprt->sc_ctxt_cnt++;
}
}
}
-static void destroy_context_cache(struct svc_rdma_op_ctxt *ctxt)
+static void destroy_context_cache(struct svcxprt_rdma *xprt)
{
- struct svc_rdma_op_ctxt *next;
- if (!ctxt)
- return;
-
- do {
- next = ctxt->next;
+ while (!list_empty(&xprt->sc_ctxt_free)) {
+ struct svc_rdma_op_ctxt *ctxt;
+ ctxt = list_entry(xprt->sc_ctxt_free.next,
+ struct svc_rdma_op_ctxt,
+ free_list);
+ list_del_init(&ctxt->free_list);
kfree(ctxt);
- ctxt = next;
- } while (next);
+ }
}
static struct svcxprt_rdma *rdma_create_xprt(struct svc_serv *serv,
@@ -465,7 +491,7 @@
reqs +
cma_xprt->sc_sq_depth +
RPCRDMA_MAX_THREADS + 1); /* max */
- if (!cma_xprt->sc_ctxt_head) {
+ if (list_empty(&cma_xprt->sc_ctxt_free)) {
kfree(cma_xprt);
return NULL;
}
@@ -520,7 +546,12 @@
recv_wr.num_sge = ctxt->count;
recv_wr.wr_id = (u64)(unsigned long)ctxt;
+ svc_xprt_get(&xprt->sc_xprt);
ret = ib_post_recv(xprt->sc_qp, &recv_wr, &bad_recv_wr);
+ if (ret) {
+ svc_xprt_put(&xprt->sc_xprt);
+ svc_rdma_put_context(ctxt, 1);
+ }
return ret;
}
@@ -539,6 +570,7 @@
{
struct svcxprt_rdma *listen_xprt = new_cma_id->context;
struct svcxprt_rdma *newxprt;
+ struct sockaddr *sa;
/* Create a new transport */
newxprt = rdma_create_xprt(listen_xprt->sc_xprt.xpt_server, 0);
@@ -551,6 +583,12 @@
dprintk("svcrdma: Creating newxprt=%p, cm_id=%p, listenxprt=%p\n",
newxprt, newxprt->sc_cm_id, listen_xprt);
+ /* Set the local and remote addresses in the transport */
+ sa = (struct sockaddr *)&newxprt->sc_cm_id->route.addr.dst_addr;
+ svc_xprt_set_remote(&newxprt->sc_xprt, sa, svc_addr_len(sa));
+ sa = (struct sockaddr *)&newxprt->sc_cm_id->route.addr.src_addr;
+ svc_xprt_set_local(&newxprt->sc_xprt, sa, svc_addr_len(sa));
+
/*
* Enqueue the new transport on the accept queue of the listening
* transport
@@ -627,6 +665,7 @@
if (xprt) {
set_bit(XPT_CLOSE, &xprt->xpt_flags);
svc_xprt_enqueue(xprt);
+ svc_xprt_put(xprt);
}
break;
case RDMA_CM_EVENT_DEVICE_REMOVAL:
@@ -661,31 +700,27 @@
cma_xprt = rdma_create_xprt(serv, 1);
if (!cma_xprt)
- return ERR_PTR(ENOMEM);
+ return ERR_PTR(-ENOMEM);
xprt = &cma_xprt->sc_xprt;
listen_id = rdma_create_id(rdma_listen_handler, cma_xprt, RDMA_PS_TCP);
if (IS_ERR(listen_id)) {
- svc_xprt_put(&cma_xprt->sc_xprt);
- dprintk("svcrdma: rdma_create_id failed = %ld\n",
- PTR_ERR(listen_id));
- return (void *)listen_id;
+ ret = PTR_ERR(listen_id);
+ dprintk("svcrdma: rdma_create_id failed = %d\n", ret);
+ goto err0;
}
+
ret = rdma_bind_addr(listen_id, sa);
if (ret) {
- rdma_destroy_id(listen_id);
- svc_xprt_put(&cma_xprt->sc_xprt);
dprintk("svcrdma: rdma_bind_addr failed = %d\n", ret);
- return ERR_PTR(ret);
+ goto err1;
}
cma_xprt->sc_cm_id = listen_id;
ret = rdma_listen(listen_id, RPCRDMA_LISTEN_BACKLOG);
if (ret) {
- rdma_destroy_id(listen_id);
- svc_xprt_put(&cma_xprt->sc_xprt);
dprintk("svcrdma: rdma_listen failed = %d\n", ret);
- return ERR_PTR(ret);
+ goto err1;
}
/*
@@ -696,6 +731,12 @@
svc_xprt_set_local(&cma_xprt->sc_xprt, sa, salen);
return &cma_xprt->sc_xprt;
+
+ err1:
+ rdma_destroy_id(listen_id);
+ err0:
+ kfree(cma_xprt);
+ return ERR_PTR(ret);
}
/*
@@ -716,7 +757,6 @@
struct rdma_conn_param conn_param;
struct ib_qp_init_attr qp_attr;
struct ib_device_attr devattr;
- struct sockaddr *sa;
int ret;
int i;
@@ -826,7 +866,6 @@
newxprt->sc_sq_depth = qp_attr.cap.max_send_wr;
newxprt->sc_max_requests = qp_attr.cap.max_recv_wr;
}
- svc_xprt_get(&newxprt->sc_xprt);
newxprt->sc_qp = newxprt->sc_cm_id->qp;
/* Register all of physical memory */
@@ -850,6 +889,13 @@
/* Swap out the handler */
newxprt->sc_cm_id->event_handler = rdma_cma_handler;
+ /*
+ * Arm the CQs for the SQ and RQ before accepting so we can't
+ * miss the first message
+ */
+ ib_req_notify_cq(newxprt->sc_sq_cq, IB_CQ_NEXT_COMP);
+ ib_req_notify_cq(newxprt->sc_rq_cq, IB_CQ_NEXT_COMP);
+
/* Accept Connection */
set_bit(RDMAXPRT_CONN_PENDING, &newxprt->sc_flags);
memset(&conn_param, 0, sizeof conn_param);
@@ -886,58 +932,26 @@
newxprt->sc_max_requests,
newxprt->sc_ord);
- /* Set the local and remote addresses in the transport */
- sa = (struct sockaddr *)&newxprt->sc_cm_id->route.addr.dst_addr;
- svc_xprt_set_remote(&newxprt->sc_xprt, sa, svc_addr_len(sa));
- sa = (struct sockaddr *)&newxprt->sc_cm_id->route.addr.src_addr;
- svc_xprt_set_local(&newxprt->sc_xprt, sa, svc_addr_len(sa));
-
- ib_req_notify_cq(newxprt->sc_sq_cq, IB_CQ_NEXT_COMP);
- ib_req_notify_cq(newxprt->sc_rq_cq, IB_CQ_NEXT_COMP);
return &newxprt->sc_xprt;
errout:
dprintk("svcrdma: failure accepting new connection rc=%d.\n", ret);
/* Take a reference in case the DTO handler runs */
svc_xprt_get(&newxprt->sc_xprt);
- if (newxprt->sc_qp && !IS_ERR(newxprt->sc_qp)) {
+ if (newxprt->sc_qp && !IS_ERR(newxprt->sc_qp))
ib_destroy_qp(newxprt->sc_qp);
- svc_xprt_put(&newxprt->sc_xprt);
- }
rdma_destroy_id(newxprt->sc_cm_id);
/* This call to put will destroy the transport */
svc_xprt_put(&newxprt->sc_xprt);
return NULL;
}
-/*
- * Post an RQ WQE to the RQ when the rqst is being released. This
- * effectively returns an RQ credit to the client. The rq_xprt_ctxt
- * will be null if the request is deferred due to an RDMA_READ or the
- * transport had no data ready (EAGAIN). Note that an RPC deferred in
- * svc_process will still return the credit, this is because the data
- * is copied and no longer consume a WQE/WC.
- */
static void svc_rdma_release_rqst(struct svc_rqst *rqstp)
{
- int err;
- struct svcxprt_rdma *rdma =
- container_of(rqstp->rq_xprt, struct svcxprt_rdma, sc_xprt);
- if (rqstp->rq_xprt_ctxt) {
- BUG_ON(rqstp->rq_xprt_ctxt != rdma);
- err = svc_rdma_post_recv(rdma);
- if (err)
- dprintk("svcrdma: failed to post an RQ WQE error=%d\n",
- err);
- }
- rqstp->rq_xprt_ctxt = NULL;
}
/*
- * When connected, an svc_xprt has at least three references:
- *
- * - A reference held by the QP. We still hold that here because this
- * code deletes the QP and puts the reference.
+ * When connected, an svc_xprt has at least two references:
*
* - A reference held by the cm_id between the ESTABLISHED and
* DISCONNECTED events. If the remote peer disconnected first, this
@@ -946,7 +960,7 @@
* - A reference held by the svc_recv code that called this function
* as part of close processing.
*
- * At a minimum two references should still be held.
+ * At a minimum one references should still be held.
*/
static void svc_rdma_detach(struct svc_xprt *xprt)
{
@@ -956,23 +970,53 @@
/* Disconnect and flush posted WQE */
rdma_disconnect(rdma->sc_cm_id);
-
- /* Destroy the QP if present (not a listener) */
- if (rdma->sc_qp && !IS_ERR(rdma->sc_qp)) {
- ib_destroy_qp(rdma->sc_qp);
- svc_xprt_put(xprt);
- }
-
- /* Destroy the CM ID */
- rdma_destroy_id(rdma->sc_cm_id);
}
-static void svc_rdma_free(struct svc_xprt *xprt)
+static void __svc_rdma_free(struct work_struct *work)
{
- struct svcxprt_rdma *rdma = (struct svcxprt_rdma *)xprt;
+ struct svcxprt_rdma *rdma =
+ container_of(work, struct svcxprt_rdma, sc_work);
dprintk("svcrdma: svc_rdma_free(%p)\n", rdma);
+
/* We should only be called from kref_put */
- BUG_ON(atomic_read(&xprt->xpt_ref.refcount) != 0);
+ BUG_ON(atomic_read(&rdma->sc_xprt.xpt_ref.refcount) != 0);
+
+ /*
+ * Destroy queued, but not processed read completions. Note
+ * that this cleanup has to be done before destroying the
+ * cm_id because the device ptr is needed to unmap the dma in
+ * svc_rdma_put_context.
+ */
+ spin_lock_bh(&rdma->sc_read_complete_lock);
+ while (!list_empty(&rdma->sc_read_complete_q)) {
+ struct svc_rdma_op_ctxt *ctxt;
+ ctxt = list_entry(rdma->sc_read_complete_q.next,
+ struct svc_rdma_op_ctxt,
+ dto_q);
+ list_del_init(&ctxt->dto_q);
+ svc_rdma_put_context(ctxt, 1);
+ }
+ spin_unlock_bh(&rdma->sc_read_complete_lock);
+
+ /* Destroy queued, but not processed recv completions */
+ spin_lock_bh(&rdma->sc_rq_dto_lock);
+ while (!list_empty(&rdma->sc_rq_dto_q)) {
+ struct svc_rdma_op_ctxt *ctxt;
+ ctxt = list_entry(rdma->sc_rq_dto_q.next,
+ struct svc_rdma_op_ctxt,
+ dto_q);
+ list_del_init(&ctxt->dto_q);
+ svc_rdma_put_context(ctxt, 1);
+ }
+ spin_unlock_bh(&rdma->sc_rq_dto_lock);
+
+ /* Warn if we leaked a resource or under-referenced */
+ WARN_ON(atomic_read(&rdma->sc_ctxt_used) != 0);
+
+ /* Destroy the QP if present (not a listener) */
+ if (rdma->sc_qp && !IS_ERR(rdma->sc_qp))
+ ib_destroy_qp(rdma->sc_qp);
+
if (rdma->sc_sq_cq && !IS_ERR(rdma->sc_sq_cq))
ib_destroy_cq(rdma->sc_sq_cq);
@@ -985,10 +1029,21 @@
if (rdma->sc_pd && !IS_ERR(rdma->sc_pd))
ib_dealloc_pd(rdma->sc_pd);
- destroy_context_cache(rdma->sc_ctxt_head);
+ /* Destroy the CM ID */
+ rdma_destroy_id(rdma->sc_cm_id);
+
+ destroy_context_cache(rdma);
kfree(rdma);
}
+static void svc_rdma_free(struct svc_xprt *xprt)
+{
+ struct svcxprt_rdma *rdma =
+ container_of(xprt, struct svcxprt_rdma, sc_xprt);
+ INIT_WORK(&rdma->sc_work, __svc_rdma_free);
+ schedule_work(&rdma->sc_work);
+}
+
static int svc_rdma_has_wspace(struct svc_xprt *xprt)
{
struct svcxprt_rdma *rdma =
@@ -1018,7 +1073,7 @@
int ret;
if (test_bit(XPT_CLOSE, &xprt->sc_xprt.xpt_flags))
- return 0;
+ return -ENOTCONN;
BUG_ON(wr->send_flags != IB_SEND_SIGNALED);
BUG_ON(((struct svc_rdma_op_ctxt *)(unsigned long)wr->wr_id)->wr_op !=
@@ -1029,7 +1084,8 @@
if (xprt->sc_sq_depth == atomic_read(&xprt->sc_sq_count)) {
spin_unlock_bh(&xprt->sc_lock);
atomic_inc(&rdma_stat_sq_starve);
- /* See if we can reap some SQ WR */
+
+ /* See if we can opportunistically reap SQ WR to make room */
sq_cq_reap(xprt);
/* Wait until SQ WR available if SQ still full */
@@ -1041,22 +1097,25 @@
continue;
}
/* Bumped used SQ WR count and post */
+ svc_xprt_get(&xprt->sc_xprt);
ret = ib_post_send(xprt->sc_qp, wr, &bad_wr);
if (!ret)
atomic_inc(&xprt->sc_sq_count);
- else
+ else {
+ svc_xprt_put(&xprt->sc_xprt);
dprintk("svcrdma: failed to post SQ WR rc=%d, "
"sc_sq_count=%d, sc_sq_depth=%d\n",
ret, atomic_read(&xprt->sc_sq_count),
xprt->sc_sq_depth);
+ }
spin_unlock_bh(&xprt->sc_lock);
break;
}
return ret;
}
-int svc_rdma_send_error(struct svcxprt_rdma *xprt, struct rpcrdma_msg *rmsgp,
- enum rpcrdma_errcode err)
+void svc_rdma_send_error(struct svcxprt_rdma *xprt, struct rpcrdma_msg *rmsgp,
+ enum rpcrdma_errcode err)
{
struct ib_send_wr err_wr;
struct ib_sge sge;
@@ -1094,9 +1153,8 @@
/* Post It */
ret = svc_rdma_send(xprt, &err_wr);
if (ret) {
- dprintk("svcrdma: Error posting send = %d\n", ret);
+ dprintk("svcrdma: Error %d posting send for protocol error\n",
+ ret);
svc_rdma_put_context(ctxt, 1);
}
-
- return ret;
}
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 2bdd4dd..fb75f26 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -187,7 +187,8 @@
return genlmsg_end(msg, hdr);
nla_put_failure:
- return genlmsg_cancel(msg, hdr);
+ genlmsg_cancel(msg, hdr);
+ return -EMSGSIZE;
}
static int nl80211_dump_wiphy(struct sk_buff *skb, struct netlink_callback *cb)
@@ -273,7 +274,8 @@
return genlmsg_end(msg, hdr);
nla_put_failure:
- return genlmsg_cancel(msg, hdr);
+ genlmsg_cancel(msg, hdr);
+ return -EMSGSIZE;
}
static int nl80211_dump_interface(struct sk_buff *skb, struct netlink_callback *cb)
@@ -928,7 +930,8 @@
return genlmsg_end(msg, hdr);
nla_put_failure:
- return genlmsg_cancel(msg, hdr);
+ genlmsg_cancel(msg, hdr);
+ return -EMSGSIZE;
}
static int nl80211_dump_station(struct sk_buff *skb,
@@ -1267,7 +1270,8 @@
return genlmsg_end(msg, hdr);
nla_put_failure:
- return genlmsg_cancel(msg, hdr);
+ genlmsg_cancel(msg, hdr);
+ return -EMSGSIZE;
}
static int nl80211_dump_mpath(struct sk_buff *skb,
diff --git a/net/xfrm/xfrm_algo.c b/net/xfrm/xfrm_algo.c
index ac765dd..23a2cc04 100644
--- a/net/xfrm/xfrm_algo.c
+++ b/net/xfrm/xfrm_algo.c
@@ -200,8 +200,8 @@
}
},
{
- .name = "hmac(ripemd160)",
- .compat = "ripemd160",
+ .name = "hmac(rmd160)",
+ .compat = "rmd160",
.uinfo = {
.auth = {
diff --git a/net/xfrm/xfrm_output.c b/net/xfrm/xfrm_output.c
index 09cd9c0..3f964db 100644
--- a/net/xfrm/xfrm_output.c
+++ b/net/xfrm/xfrm_output.c
@@ -25,11 +25,11 @@
struct dst_entry *dst = skb->dst;
int nhead = dst->header_len + LL_RESERVED_SPACE(dst->dev)
- skb_headroom(skb);
+ int ntail = dst->dev->needed_tailroom - skb_tailroom(skb);
- if (nhead > 0)
- return pskb_expand_head(skb, nhead, 0, GFP_ATOMIC);
+ if (nhead > 0 || ntail > 0)
+ return pskb_expand_head(skb, nhead, ntail, GFP_ATOMIC);
- /* Check tail too... */
return 0;
}
diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c
index a1b0fbe..b976d9e 100644
--- a/net/xfrm/xfrm_user.c
+++ b/net/xfrm/xfrm_user.c
@@ -50,19 +50,8 @@
switch (type) {
case XFRMA_ALG_AUTH:
- if (!algp->alg_key_len &&
- strcmp(algp->alg_name, "digest_null") != 0)
- return -EINVAL;
- break;
-
case XFRMA_ALG_CRYPT:
- if (!algp->alg_key_len &&
- strcmp(algp->alg_name, "cipher_null") != 0)
- return -EINVAL;
- break;
-
case XFRMA_ALG_COMP:
- /* Zero length keys are legal. */
break;
default:
diff --git a/scripts/Makefile.modpost b/scripts/Makefile.modpost
index a098a04..17092d6 100644
--- a/scripts/Makefile.modpost
+++ b/scripts/Makefile.modpost
@@ -43,7 +43,13 @@
include include/config/auto.conf
include scripts/Kbuild.include
+# When building external modules load the Kbuild file to retreive EXTRA_SYMBOLS info
ifneq ($(KBUILD_EXTMOD),)
+
+# set src + obj - they may be used when building the .mod.c file
+obj := $(KBUILD_EXTMOD)
+src := $(obj)
+
# Include the module's Makefile to find KBUILD_EXTRA_SYMBOLS
include $(if $(wildcard $(KBUILD_EXTMOD)/Kbuild), \
$(KBUILD_EXTMOD)/Kbuild, $(KBUILD_EXTMOD)/Makefile)
diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl
index b6bbbcd..6971bf0 100755
--- a/scripts/checkpatch.pl
+++ b/scripts/checkpatch.pl
@@ -9,7 +9,7 @@
my $P = $0;
$P =~ s@.*/@@g;
-my $V = '0.18';
+my $V = '0.19';
use Getopt::Long qw(:config no_auto_abbrev);
@@ -115,6 +115,7 @@
__kprobes|
__(?:mem|cpu|dev|)(?:initdata|init)
}x;
+our $Modifier;
our $Inline = qr{inline|__always_inline|noinline};
our $Member = qr{->$Ident|\.$Ident|\[[^]]*\]};
our $Lval = qr{$Ident(?:$Member)*};
@@ -144,17 +145,17 @@
our @typeList = (
qr{void},
- qr{char},
- qr{short},
- qr{int},
- qr{long},
+ qr{(?:unsigned\s+)?char},
+ qr{(?:unsigned\s+)?short},
+ qr{(?:unsigned\s+)?int},
+ qr{(?:unsigned\s+)?long},
+ qr{(?:unsigned\s+)?long\s+int},
+ qr{(?:unsigned\s+)?long\s+long},
+ qr{(?:unsigned\s+)?long\s+long\s+int},
qr{unsigned},
qr{float},
qr{double},
qr{bool},
- qr{long\s+int},
- qr{long\s+long},
- qr{long\s+long\s+int},
qr{(?:__)?(?:u|s|be|le)(?:8|16|32|64)},
qr{struct\s+$Ident},
qr{union\s+$Ident},
@@ -163,26 +164,29 @@
qr{${Ident}_handler},
qr{${Ident}_handler_fn},
);
+our @modifierList = (
+ qr{fastcall},
+);
sub build_types {
+ my $mods = "(?: \n" . join("|\n ", @modifierList) . "\n)";
my $all = "(?: \n" . join("|\n ", @typeList) . "\n)";
$NonptrType = qr{
- \b
(?:const\s+)?
- (?:unsigned\s+)?
+ (?:$mods\s+)?
(?:
- $all|
- (?:typeof|__typeof__)\s*\(\s*\**\s*$Ident\s*\)
+ (?:typeof|__typeof__)\s*\(\s*\**\s*$Ident\s*\)|
+ (?:${all}\b)
)
(?:\s+$Sparse|\s+const)*
- \b
}x;
$Type = qr{
- \b$NonptrType\b
+ $NonptrType
(?:\s*\*+\s*const|\s*\*+|(?:\s*\[\s*\])+)?
- (?:\s+$Inline|\s+$Sparse|\s+$Attribute)*
+ (?:\s+$Inline|\s+$Sparse|\s+$Attribute|\s+$mods)*
}x;
$Declare = qr{(?:$Storage\s+)?$Type};
+ $Modifier = qr{(?:$Attribute|$Sparse|$mods)};
}
build_types();
@@ -329,7 +333,7 @@
$off++;
next;
}
- if (substr($line, $off, 2) eq $sanitise_quote) {
+ if (substr($line, $off, 2) eq '*/') {
$sanitise_quote = '';
substr($res, $off, 2, "$;$;");
$off++;
@@ -366,14 +370,14 @@
}
# The pathname on a #include may be surrounded by '<' and '>'.
- if ($res =~ /^.#\s*include\s+\<(.*)\>/) {
+ if ($res =~ /^.\s*\#\s*include\s+\<(.*)\>/) {
my $clean = 'X' x length($1);
$res =~ s@\<.*\>@<$clean>@;
# The whole of a #error is a string.
- } elsif ($res =~ /^.#\s*(?:error|warning)\s+(.*)\b/) {
+ } elsif ($res =~ /^.\s*\#\s*(?:error|warning)\s+(.*)\b/) {
my $clean = 'X' x length($1);
- $res =~ s@(#\s*(?:error|warning)\s+).*@$1$clean@;
+ $res =~ s@(\#\s*(?:error|warning)\s+).*@$1$clean@;
}
return $res;
@@ -715,7 +719,7 @@
print "DECLARE($1)\n" if ($dbg_values > 1);
$type = 'T';
- } elsif ($cur =~ /^(#\s*define\s*$Ident)(\(?)/o) {
+ } elsif ($cur =~ /^(\#\s*define\s*$Ident)(\(?)/o) {
print "DEFINE($1,$2)\n" if ($dbg_values > 1);
$av_preprocessor = 1;
push(@av_paren_type, $type);
@@ -724,12 +728,12 @@
}
$type = 'E';
- } elsif ($cur =~ /^(#\s*undef\s*$Ident)/o) {
+ } elsif ($cur =~ /^(\#\s*(?:undef\s*$Ident|include\b))/o) {
print "UNDEF($1)\n" if ($dbg_values > 1);
$av_preprocessor = 1;
push(@av_paren_type, $type);
- } elsif ($cur =~ /^(#\s*(?:ifdef|ifndef|if))/o) {
+ } elsif ($cur =~ /^(\#\s*(?:ifdef|ifndef|if))/o) {
print "PRE_START($1)\n" if ($dbg_values > 1);
$av_preprocessor = 1;
@@ -737,7 +741,7 @@
push(@av_paren_type, $type);
$type = 'E';
- } elsif ($cur =~ /^(#\s*(?:else|elif))/o) {
+ } elsif ($cur =~ /^(\#\s*(?:else|elif))/o) {
print "PRE_RESTART($1)\n" if ($dbg_values > 1);
$av_preprocessor = 1;
@@ -745,7 +749,7 @@
$type = 'E';
- } elsif ($cur =~ /^(#\s*(?:endif))/o) {
+ } elsif ($cur =~ /^(\#\s*(?:endif))/o) {
print "PRE_END($1)\n" if ($dbg_values > 1);
$av_preprocessor = 1;
@@ -837,14 +841,26 @@
sub possible {
my ($possible, $line) = @_;
- #print "CHECK<$possible>\n";
+ print "CHECK<$possible> ($line)\n" if ($dbg_possible > 1);
if ($possible !~ /^(?:$Storage|$Type|DEFINE_\S+)$/ &&
$possible ne 'goto' && $possible ne 'return' &&
- $possible ne 'struct' && $possible ne 'enum' &&
$possible ne 'case' && $possible ne 'else' &&
- $possible ne 'typedef') {
- warn "POSSIBLE: $possible ($line)\n" if ($dbg_possible);
- push(@typeList, $possible);
+ $possible ne 'asm' &&
+ $possible !~ /^(typedef|struct|enum)\b/) {
+ # Check for modifiers.
+ $possible =~ s/\s*$Storage\s*//g;
+ $possible =~ s/\s*$Sparse\s*//g;
+ if ($possible =~ /^\s*$/) {
+
+ } elsif ($possible =~ /\s/) {
+ $possible =~ s/\s*$Type\s*//g;
+ warn "MODIFIER: $possible ($line)\n" if ($dbg_possible);
+ push(@modifierList, $possible);
+
+ } else {
+ warn "POSSIBLE: $possible ($line)\n" if ($dbg_possible);
+ push(@typeList, $possible);
+ }
build_types();
}
}
@@ -949,6 +965,7 @@
} else {
$realcnt=1+1;
}
+ $in_comment = 0;
# Guestimate if this is a continuing comment. Run
# the context looking for a comment "edge". If this
@@ -1117,7 +1134,9 @@
ERROR("trailing whitespace\n" . $herevet);
}
#80 column limit
- if ($line =~ /^\+/ && !($prevrawline=~/\/\*\*/) && $length > 80) {
+ if ($line =~ /^\+/ && $prevrawline !~ /\/\*\*/ &&
+ $rawline !~ /^.\s*\*\s*\@$Ident\s/ && $length > 80)
+ {
WARN("line over 80 characters\n" . $herecurr);
}
@@ -1159,18 +1178,20 @@
# Ignore functions being called
} elsif ($s =~ /^.\s*$Ident\s*\(/s) {
+ # declarations always start with types
+ } elsif ($prev_values eq 'E' && $s =~ /^.\s*(?:$Storage\s+)?(?:$Inline\s+)?(?:const\s+)?((?:\s*$Ident)+)\b(?:\s+$Sparse)?\s*\**\s*(?:$Ident|\(\*[^\)]*\))\s*(?:;|=|,|\()/s) {
+ my $type = $1;
+ $type =~ s/\s+/ /g;
+ possible($type, "A:" . $s);
+
# definitions in global scope can only start with types
} elsif ($s =~ /^.(?:$Storage\s+)?(?:$Inline\s+)?(?:const\s+)?($Ident)\b/s) {
- possible($1, $s);
-
- # declarations always start with types
- } elsif ($prev_values eq 'E' && $s =~ /^.\s*(?:$Storage\s+)?(?:const\s+)?($Ident)\b(:?\s+$Sparse)?\s*\**\s*$Ident\s*(?:;|=|,)/s) {
- possible($1, $s);
+ possible($1, "B:" . $s);
}
# any (foo ... *) is a pointer cast, and foo is a type
while ($s =~ /\(($Ident)(?:\s+$Sparse)*\s*\*+\s*\)/sg) {
- possible($1, $s);
+ possible($1, "C:" . $s);
}
# Check for any sort of function declaration.
@@ -1184,9 +1205,9 @@
$ctx =~ s/\)[^\)]*$//;
for my $arg (split(/\s*,\s*/, $ctx)) {
- if ($arg =~ /^(?:const\s+)?($Ident)(?:\s+$Sparse)*\s*\**\s*(:?\b$Ident)?$/ || $arg =~ /^($Ident)$/) {
+ if ($arg =~ /^(?:const\s+)?($Ident)(?:\s+$Sparse)*\s*\**\s*(:?\b$Ident)?$/s || $arg =~ /^($Ident)$/s) {
- possible($1, $s);
+ possible($1, "D:" . $s);
}
}
}
@@ -1221,7 +1242,7 @@
# if/while/etc brace do not go on next line, unless defining a do while loop,
# or if that brace on the next line is for something else
- if ($line =~ /(.*)\b((?:if|while|for|switch)\s*\(|do\b|else\b)/ && $line !~ /^.#/) {
+ if ($line =~ /(.*)\b((?:if|while|for|switch)\s*\(|do\b|else\b)/ && $line !~ /^.\s*\#/) {
my $pre_ctx = "$1$2";
my ($level, @ctx) = ctx_statement_level($linenr, $realcnt, 0);
@@ -1239,7 +1260,7 @@
if ($ctx !~ /{\s*/ && defined($lines[$ctx_ln -1]) && $lines[$ctx_ln - 1] =~ /^\+\s*{/) {
ERROR("that open brace { should be on the previous line\n" .
- "$here\n$ctx\n$lines[$ctx_ln - 1]");
+ "$here\n$ctx\n$lines[$ctx_ln - 1]\n");
}
if ($level == 0 && $pre_ctx !~ /}\s*while\s*\($/ &&
$ctx =~ /\)\s*\;\s*$/ &&
@@ -1248,7 +1269,7 @@
my ($nlength, $nindent) = line_stats($lines[$ctx_ln - 1]);
if ($nindent > $indent) {
WARN("trailing semicolon indicates no statements, indent implies otherwise\n" .
- "$here\n$ctx\n$lines[$ctx_ln - 1]");
+ "$here\n$ctx\n$lines[$ctx_ln - 1]\n");
}
}
}
@@ -1284,7 +1305,7 @@
#
# check for malformed paths in #include statements (uses RAW line)
- if ($rawline =~ m{^.#\s*include\s+[<"](.*)[">]}) {
+ if ($rawline =~ m{^.\s*\#\s*include\s+[<"](.*)[">]}) {
my $path = $1;
if ($path =~ m{//}) {
ERROR("malformed #include filename\n" .
@@ -1316,7 +1337,7 @@
}
# check for external initialisers.
- if ($line =~ /^.$Type\s*$Ident\s*=\s*(0|NULL|false)\s*;/) {
+ if ($line =~ /^.$Type\s*$Ident\s*(?:\s+$Modifier)*\s*=\s*(0|NULL|false)\s*;/) {
ERROR("do not initialise externals to 0 or NULL\n" .
$herecurr);
}
@@ -1330,6 +1351,7 @@
# make sense.
if ($line =~ /\btypedef\s/ &&
$line !~ /\btypedef\s+$Type\s+\(\s*\*?$Ident\s*\)\s*\(/ &&
+ $line !~ /\btypedef\s+$Type\s+$Ident\s*\(/ &&
$line !~ /\b__bitwise(?:__|)\b/) {
WARN("do not add new typedefs\n" . $herecurr);
}
@@ -1388,8 +1410,8 @@
# function brace can't be on same line, except for #defines of do while,
# or if closed on same line
- if (($line=~/$Type\s*[A-Za-z\d_]+\(.*\).*\s{/) and
- !($line=~/\#define.*do\s{/) and !($line=~/}/)) {
+ if (($line=~/$Type\s*$Ident\(.*\).*\s{/) and
+ !($line=~/\#\s*define.*do\s{/) and !($line=~/}/)) {
ERROR("open brace '{' following function declarations go on the next line\n" . $herecurr);
}
@@ -1416,10 +1438,10 @@
# cpp #define statements have non-optional spaces, ie
# if there is a space between the name and the open
# parenthesis it is simply not a parameter group.
- } elsif ($ctx_before =~ /^.\#\s*define\s*$/) {
+ } elsif ($ctx_before =~ /^.\s*\#\s*define\s*$/) {
# cpp #elif statement condition may start with a (
- } elsif ($ctx =~ /^.\#\s*elif\s*$/) {
+ } elsif ($ctx =~ /^.\s*\#\s*elif\s*$/) {
# If this whole things ends with a type its most
# likely a typedef for a function.
@@ -1625,13 +1647,14 @@
ERROR("space prohibited before that close square bracket ']'\n" . $herecurr);
}
-# check spacing on paretheses
+# check spacing on parentheses
if ($line =~ /\(\s/ && $line !~ /\(\s*(?:\\)?$/ &&
$line !~ /for\s*\(\s+;/) {
ERROR("space prohibited after that open parenthesis '('\n" . $herecurr);
}
if ($line =~ /(\s+)\)/ && $line !~ /^.\s*\)/ &&
- $line !~ /for\s*\(.*;\s+\)/) {
+ $line !~ /for\s*\(.*;\s+\)/ &&
+ $line !~ /:\s+\)/) {
ERROR("space prohibited before that close parenthesis ')'\n" . $herecurr);
}
@@ -1641,6 +1664,23 @@
WARN("labels should not be indented\n" . $herecurr);
}
+# Return is not a function.
+ if (defined($stat) && $stat =~ /^.\s*return(\s*)(\(.*);/s) {
+ my $spacing = $1;
+ my $value = $2;
+
+ # Flatten any parentheses and braces
+ while ($value =~ s/\([^\(\)]*\)/1/) {
+ }
+
+ if ($value =~ /^(?:$Ident|-?$Constant)$/) {
+ ERROR("return is not a function, parentheses are not required\n" . $herecurr);
+
+ } elsif ($spacing !~ /\s+/) {
+ ERROR("space required before the open parenthesis '('\n" . $herecurr);
+ }
+ }
+
# Need a space before open parenthesis after if, while etc
if ($line=~/\b(if|while|for|switch)\(/) {
ERROR("space required before the open parenthesis '('\n" . $herecurr);
@@ -1660,7 +1700,7 @@
$s =~ s/\n.*//g;
$s =~ s/$;//g; # Remove any comments
if (length($c) && $s !~ /^\s*({|;|)\s*\\*\s*$/ &&
- $c !~ /^.\#\s*if/)
+ $c !~ /^.\s*\#\s*if/)
{
ERROR("trailing statements should be on next line\n" . $herecurr);
}
@@ -1719,14 +1759,16 @@
# }
#no spaces allowed after \ in define
- if ($line=~/\#define.*\\\s$/) {
+ if ($line=~/\#\s*define.*\\\s$/) {
WARN("Whitepspace after \\ makes next lines useless\n" . $herecurr);
}
#warn if <asm/foo.h> is #included and <linux/foo.h> is available (uses RAW line)
- if ($tree && $rawline =~ m{^.\#\s*include\s*\<asm\/(.*)\.h\>}) {
- my $checkfile = "$root/include/linux/$1.h";
- if (-f $checkfile && $1 ne 'irq') {
+ if ($tree && $rawline =~ m{^.\s*\#\s*include\s*\<asm\/(.*)\.h\>}) {
+ my $checkfile = "include/linux/$1.h";
+ if (-f "$root/$checkfile" && $realfile ne $checkfile &&
+ $1 ne 'irq')
+ {
WARN("Use #include <linux/$1.h> instead of <asm/$1.h>\n" .
$herecurr);
}
@@ -1735,45 +1777,87 @@
# multi-statement macros should be enclosed in a do while loop, grab the
# first statement and ensure its the whole macro if its not enclosed
# in a known good container
- if ($prevline =~ /\#define.*\\/ &&
- $prevline !~/(?:do\s+{|\(\{|\{)/ &&
- $line !~ /(?:do\s+{|\(\{|\{)/ &&
- $line !~ /^.\s*$Declare\s/) {
- # Grab the first statement, if that is the entire macro
- # its ok. This may start either on the #define line
- # or the one below.
+ if ($line =~ /^.\s*\#\s*define\s*$Ident(\()?/) {
my $ln = $linenr;
my $cnt = $realcnt;
- my $off = 0;
+ my ($off, $dstat, $dcond, $rest);
+ my $ctx = '';
- # If the macro starts on the define line start
- # grabbing the statement after the identifier
- $prevline =~ m{^(.#\s*define\s*$Ident(?:\([^\)]*\))?\s*)(.*)\\\s*$};
- ##print "1<$1> 2<$2>\n";
- if (defined $2 && $2 ne '') {
- $off = length($1);
- $ln--;
- $cnt++;
- while ($lines[$ln - 1] =~ /^-/) {
- $ln--;
- $cnt++;
- }
+ my $args = defined($1);
+
+ # Find the end of the macro and limit our statement
+ # search to that.
+ while ($cnt > 0 && defined $lines[$ln - 1] &&
+ $lines[$ln - 1] =~ /^(?:-|..*\\$)/)
+ {
+ $ctx .= $rawlines[$ln - 1] . "\n";
+ $ln++;
+ $cnt--;
}
- my @ctx = ctx_statement($ln, $cnt, $off);
- my $ctx_ln = $ln + $#ctx + 1;
- my $ctx = join("\n", @ctx);
+ $ctx .= $rawlines[$ln - 1];
- # Pull in any empty extension lines.
- while ($ctx =~ /\\$/ &&
- $lines[$ctx_ln - 1] =~ /^.\s*(?:\\)?$/) {
- $ctx .= $lines[$ctx_ln - 1];
- $ctx_ln++;
+ ($dstat, $dcond, $ln, $cnt, $off) =
+ ctx_statement_block($linenr, $ln - $linenr + 1, 0);
+ #print "dstat<$dstat> dcond<$dcond> cnt<$cnt> off<$off>\n";
+ #print "LINE<$lines[$ln]> len<" . length($lines[$ln]) . "\n";
+
+ # Extract the remainder of the define (if any) and
+ # rip off surrounding spaces, and trailing \'s.
+ $rest = '';
+ if (defined $lines[$ln - 1] &&
+ $off > length($lines[$ln - 1]))
+ {
+ $ln++;
+ $cnt--;
+ $off = 0;
+ }
+ while ($cnt > 0) {
+ $rest .= substr($lines[$ln - 1], $off) . "\n";
+ $ln++;
+ $cnt--;
+ $off = 0;
+ }
+ $rest =~ s/\\\n.//g;
+ $rest =~ s/^\s*//s;
+ $rest =~ s/\s*$//s;
+
+ # Clean up the original statement.
+ if ($args) {
+ substr($dstat, 0, length($dcond), '');
+ } else {
+ $dstat =~ s/^.\s*\#\s*define\s+$Ident\s*//;
+ }
+ $dstat =~ s/\\\n.//g;
+ $dstat =~ s/^\s*//s;
+ $dstat =~ s/\s*$//s;
+
+ # Flatten any parentheses and braces
+ while ($dstat =~ s/\([^\(\)]*\)/1/) {
+ }
+ while ($dstat =~ s/\{[^\{\}]*\}/1/) {
}
- if ($ctx =~ /\\$/) {
- if ($ctx =~ /;/) {
+ my $exceptions = qr{
+ $Declare|
+ module_param_named|
+ MODULE_PARAM_DESC|
+ DECLARE_PER_CPU|
+ DEFINE_PER_CPU|
+ __typeof__\(
+ }x;
+ if ($rest ne '') {
+ if ($rest !~ /while\s*\(/ &&
+ $dstat !~ /$exceptions/)
+ {
ERROR("Macros with multiple statements should be enclosed in a do - while loop\n" . "$here\n$ctx\n");
- } else {
+ }
+
+ } elsif ($ctx !~ /;/) {
+ if ($dstat ne '' &&
+ $dstat !~ /^(?:$Ident|-?$Constant)$/ &&
+ $dstat !~ /$exceptions/ &&
+ $dstat =~ /$Operators/)
+ {
ERROR("Macros with complex values should be enclosed in parenthesis\n" . "$here\n$ctx\n");
}
}
@@ -1884,7 +1968,7 @@
# don't include deprecated include files (uses RAW line)
for my $inc (@dep_includes) {
- if ($rawline =~ m@\#\s*include\s*\<$inc>@) {
+ if ($rawline =~ m@^.\s*\#\s*include\s*\<$inc>@) {
ERROR("Don't use <$inc>: see Documentation/feature-removal-schedule.txt\n" . $herecurr);
}
}
@@ -1908,7 +1992,7 @@
}
# warn about #if 0
- if ($line =~ /^.#\s*if\s+0\b/) {
+ if ($line =~ /^.\s*\#\s*if\s+0\b/) {
CHK("if this code is redundant consider removing it\n" .
$herecurr);
}
@@ -1920,23 +2004,16 @@
WARN("kfree(NULL) is safe this check is probabally not required\n" . $hereprev);
}
}
-# check for needless usb_free_urb() checks
- if ($prevline =~ /\bif\s*\(([^\)]*)\)/) {
- my $expr = $1;
- if ($line =~ /\busb_free_urb\(\Q$expr\E\);/) {
- WARN("usb_free_urb(NULL) is safe this check is probabally not required\n" . $hereprev);
- }
- }
# warn about #ifdefs in C files
-# if ($line =~ /^.#\s*if(|n)def/ && ($realfile =~ /\.c$/)) {
+# if ($line =~ /^.\s*\#\s*if(|n)def/ && ($realfile =~ /\.c$/)) {
# print "#ifdef in C files should be avoided\n";
# print "$herecurr";
# $clean = 0;
# }
# warn about spacing in #ifdefs
- if ($line =~ /^.#\s*(ifdef|ifndef|elif)\s\s+/) {
+ if ($line =~ /^.\s*\#\s*(ifdef|ifndef|elif)\s\s+/) {
ERROR("exactly one space required after that #$1\n" . $herecurr);
}
@@ -1955,7 +2032,7 @@
}
}
# check of hardware specific defines
- if ($line =~ m@^.#\s*if.*\b(__i386__|__powerpc64__|__sun__|__s390x__)\b@ && $realfile !~ m@include/asm-@) {
+ if ($line =~ m@^.\s*\#\s*if.*\b(__i386__|__powerpc64__|__sun__|__s390x__)\b@ && $realfile !~ m@include/asm-@) {
CHK("architecture specific defines should be avoided\n" . $herecurr);
}
@@ -1973,15 +2050,18 @@
# check for new externs in .c files.
if ($realfile =~ /\.c$/ && defined $stat &&
- $stat =~ /^.\s*(?:extern\s+)?$Type\s+$Ident(\s*)\(/s)
+ $stat =~ /^.\s*(?:extern\s+)?$Type\s+($Ident)(\s*)\(/s)
{
- my $paren_space = $1;
+ my $function_name = $1;
+ my $paren_space = $2;
my $s = $stat;
if (defined $cond) {
substr($s, 0, length($cond), '');
}
- if ($s =~ /^\s*;/) {
+ if ($s =~ /^\s*;/ &&
+ $function_name ne 'uninitialized_var')
+ {
WARN("externs should be avoided in .c files\n" . $herecurr);
}
@@ -2030,8 +2110,8 @@
# use of NR_CPUS is usually wrong
# ignore definitions of NR_CPUS and usage to define arrays as likely right
if ($line =~ /\bNR_CPUS\b/ &&
- $line !~ /^.#\s*if\b.*\bNR_CPUS\b/ &&
- $line !~ /^.#\s*define\b.*\bNR_CPUS\b/ &&
+ $line !~ /^.\s*\s*#\s*if\b.*\bNR_CPUS\b/ &&
+ $line !~ /^.\s*\s*#\s*define\b.*\bNR_CPUS\b/ &&
$line !~ /^.\s*$Declare\s.*\[[^\]]*NR_CPUS[^\]]*\]/ &&
$line !~ /\[[^\]]*\.\.\.[^\]]*NR_CPUS[^\]]*\]/ &&
$line !~ /\[[^\]]*NR_CPUS[^\]]*\.\.\.[^\]]*\]/)
diff --git a/scripts/decodecode b/scripts/decodecode
old mode 100644
new mode 100755
diff --git a/scripts/kallsyms.c b/scripts/kallsyms.c
index 5d20a2e..ad2434b 100644
--- a/scripts/kallsyms.c
+++ b/scripts/kallsyms.c
@@ -108,6 +108,9 @@
/* exclude also MIPS ELF local symbols ($L123 instead of .L123) */
else if (str[0] == '$')
return -1;
+ /* exclude debugging symbols */
+ else if (stype == 'N')
+ return -1;
/* include the type field in the symbol name, so that it gets
* compressed together */
diff --git a/scripts/kconfig/util.c b/scripts/kconfig/util.c
index f8e73c0..3cc9f93 100644
--- a/scripts/kconfig/util.c
+++ b/scripts/kconfig/util.c
@@ -77,7 +77,7 @@
{
struct gstr gs;
gs.s = malloc(sizeof(char) * 64);
- gs.len = 16;
+ gs.len = 64;
strcpy(gs.s, "\0");
return gs;
}
diff --git a/scripts/kernel-doc b/scripts/kernel-doc
index 83cee18..88e3934 100755
--- a/scripts/kernel-doc
+++ b/scripts/kernel-doc
@@ -1556,7 +1556,9 @@
push_parameter($2, "$type $1", $file);
}
elsif ($param =~ m/(.*?):(\d+)/) {
- push_parameter($1, "$type:$2", $file)
+ if ($type ne "") { # skip unnamed bit-fields
+ push_parameter($1, "$type:$2", $file)
+ }
}
else {
push_parameter($param, $type, $file);
diff --git a/scripts/mksysmap b/scripts/mksysmap
index 4390fab..6e133a0 100644
--- a/scripts/mksysmap
+++ b/scripts/mksysmap
@@ -32,6 +32,7 @@
# For System.map filter away:
# a - local absolute symbols
# U - undefined global symbols
+# N - debugging symbols
# w - local weak symbols
# readprofile starts reading symbols when _stext is found, and
@@ -40,5 +41,5 @@
# so we just ignore them to let readprofile continue to work.
# (At least sparc64 has __crc_ in the middle).
-$NM -n $1 | grep -v '\( [aUw] \)\|\(__crc_\)\|\( \$[adt]\)' > $2
+$NM -n $1 | grep -v '\( [aNUw] \)\|\(__crc_\)\|\( \$[adt]\)' > $2
diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c
index 757294b..a07f91a 100644
--- a/scripts/mod/modpost.c
+++ b/scripts/mod/modpost.c
@@ -467,6 +467,25 @@
release_file(info->hdr, info->size);
}
+static int ignore_undef_symbol(struct elf_info *info, const char *symname)
+{
+ /* ignore __this_module, it will be resolved shortly */
+ if (strcmp(symname, MODULE_SYMBOL_PREFIX "__this_module") == 0)
+ return 1;
+ /* ignore global offset table */
+ if (strcmp(symname, "_GLOBAL_OFFSET_TABLE_") == 0)
+ return 1;
+ if (info->hdr->e_machine == EM_PPC)
+ /* Special register function linked on all modules during final link of .ko */
+ if (strncmp(symname, "_restgpr_", sizeof("_restgpr_") - 1) == 0 ||
+ strncmp(symname, "_savegpr_", sizeof("_savegpr_") - 1) == 0 ||
+ strncmp(symname, "_rest32gpr_", sizeof("_rest32gpr_") - 1) == 0 ||
+ strncmp(symname, "_save32gpr_", sizeof("_save32gpr_") - 1) == 0)
+ return 1;
+ /* Do not ignore this symbol */
+ return 0;
+}
+
#define CRC_PFX MODULE_SYMBOL_PREFIX "__crc_"
#define KSYMTAB_PFX MODULE_SYMBOL_PREFIX "__ksymtab_"
@@ -493,11 +512,7 @@
if (ELF_ST_BIND(sym->st_info) != STB_GLOBAL &&
ELF_ST_BIND(sym->st_info) != STB_WEAK)
break;
- /* ignore global offset table */
- if (strcmp(symname, "_GLOBAL_OFFSET_TABLE_") == 0)
- break;
- /* ignore __this_module, it will be resolved shortly */
- if (strcmp(symname, MODULE_SYMBOL_PREFIX "__this_module") == 0)
+ if (ignore_undef_symbol(info, symname))
break;
/* cope with newer glibc (2.3.4 or higher) STT_ definition in elf.h */
#if defined(STT_REGISTER) || defined(STT_SPARC_REGISTER)
@@ -721,7 +736,7 @@
/* consume all digits */
while (*e && e != sec && isdigit(*e))
e--;
- if (*e == '.') {
+ if (*e == '.' && !strstr(sec, ".linkonce")) {
warn("%s (%s): unexpected section name.\n"
"The (.[number]+) following section name are "
"ld generated and not expected.\n"
diff --git a/scripts/ver_linux b/scripts/ver_linux
index ab69ece..7ac0e30 100755
--- a/scripts/ver_linux
+++ b/scripts/ver_linux
@@ -12,12 +12,9 @@
uname -a
echo ' '
-gcc --version 2>&1| head -n 1 | grep -v gcc | awk \
+gcc -dumpversion 2>&1| awk \
'NR==1{print "Gnu C ", $1}'
-gcc --version 2>&1| grep gcc | awk \
-'NR==1{print "Gnu C ", $3}'
-
make --version 2>&1 | awk -F, '{print $1}' | awk \
'/GNU Make/{print "Gnu make ",$NF}'
diff --git a/security/device_cgroup.c b/security/device_cgroup.c
index 4ea5836..baf3488 100644
--- a/security/device_cgroup.c
+++ b/security/device_cgroup.c
@@ -49,10 +49,14 @@
spinlock_t lock;
};
+static inline struct dev_cgroup *css_to_devcgroup(struct cgroup_subsys_state *s)
+{
+ return container_of(s, struct dev_cgroup, css);
+}
+
static inline struct dev_cgroup *cgroup_to_devcgroup(struct cgroup *cgroup)
{
- return container_of(cgroup_subsys_state(cgroup, devices_subsys_id),
- struct dev_cgroup, css);
+ return css_to_devcgroup(cgroup_subsys_state(cgroup, devices_subsys_id));
}
struct cgroup_subsys devices_subsys;
@@ -102,7 +106,7 @@
static int dev_whitelist_add(struct dev_cgroup *dev_cgroup,
struct dev_whitelist_item *wh)
{
- struct dev_whitelist_item *whcopy;
+ struct dev_whitelist_item *whcopy, *walk;
whcopy = kmalloc(sizeof(*whcopy), GFP_KERNEL);
if (!whcopy)
@@ -110,7 +114,21 @@
memcpy(whcopy, wh, sizeof(*whcopy));
spin_lock(&dev_cgroup->lock);
- list_add_tail(&whcopy->list, &dev_cgroup->whitelist);
+ list_for_each_entry(walk, &dev_cgroup->whitelist, list) {
+ if (walk->type != wh->type)
+ continue;
+ if (walk->major != wh->major)
+ continue;
+ if (walk->minor != wh->minor)
+ continue;
+
+ walk->access |= wh->access;
+ kfree(whcopy);
+ whcopy = NULL;
+ }
+
+ if (whcopy != NULL)
+ list_add_tail(&whcopy->list, &dev_cgroup->whitelist);
spin_unlock(&dev_cgroup->lock);
return 0;
}
@@ -502,7 +520,6 @@
int devcgroup_inode_permission(struct inode *inode, int mask)
{
- struct cgroup *cgroup;
struct dev_cgroup *dev_cgroup;
struct dev_whitelist_item *wh;
@@ -511,8 +528,8 @@
return 0;
if (!S_ISBLK(inode->i_mode) && !S_ISCHR(inode->i_mode))
return 0;
- cgroup = task_cgroup(current, devices_subsys.subsys_id);
- dev_cgroup = cgroup_to_devcgroup(cgroup);
+ dev_cgroup = css_to_devcgroup(task_subsys_state(current,
+ devices_subsys_id));
if (!dev_cgroup)
return 0;
@@ -543,12 +560,11 @@
int devcgroup_inode_mknod(int mode, dev_t dev)
{
- struct cgroup *cgroup;
struct dev_cgroup *dev_cgroup;
struct dev_whitelist_item *wh;
- cgroup = task_cgroup(current, devices_subsys.subsys_id);
- dev_cgroup = cgroup_to_devcgroup(cgroup);
+ dev_cgroup = css_to_devcgroup(task_subsys_state(current,
+ devices_subsys_id));
if (!dev_cgroup)
return 0;
diff --git a/security/dummy.c b/security/dummy.c
index f50c6c3..b891688 100644
--- a/security/dummy.c
+++ b/security/dummy.c
@@ -27,6 +27,8 @@
#include <linux/hugetlb.h>
#include <linux/ptrace.h>
#include <linux/file.h>
+#include <linux/prctl.h>
+#include <linux/securebits.h>
static int dummy_ptrace (struct task_struct *parent, struct task_struct *child)
{
@@ -607,7 +609,27 @@
static int dummy_task_prctl (int option, unsigned long arg2, unsigned long arg3,
unsigned long arg4, unsigned long arg5, long *rc_p)
{
- return 0;
+ switch (option) {
+ case PR_CAPBSET_READ:
+ *rc_p = (cap_valid(arg2) ? 1 : -EINVAL);
+ break;
+ case PR_GET_KEEPCAPS:
+ *rc_p = issecure(SECURE_KEEP_CAPS);
+ break;
+ case PR_SET_KEEPCAPS:
+ if (arg2 > 1)
+ *rc_p = -EINVAL;
+ else if (arg2)
+ current->securebits |= issecure_mask(SECURE_KEEP_CAPS);
+ else
+ current->securebits &=
+ ~issecure_mask(SECURE_KEEP_CAPS);
+ break;
+ default:
+ return 0;
+ }
+
+ return 1;
}
static void dummy_task_reparent_to_init (struct task_struct *p)
diff --git a/security/keys/internal.h b/security/keys/internal.h
index 8c05587..b39f5c2 100644
--- a/security/keys/internal.h
+++ b/security/keys/internal.h
@@ -78,7 +78,6 @@
extern struct rb_root key_serial_tree;
extern spinlock_t key_serial_lock;
-extern struct semaphore key_alloc_sem;
extern struct mutex key_construction_mutex;
extern wait_queue_head_t request_key_conswq;
diff --git a/security/smack/smack_lsm.c b/security/smack/smack_lsm.c
index b5c8f92..4a09293 100644
--- a/security/smack/smack_lsm.c
+++ b/security/smack/smack_lsm.c
@@ -1881,6 +1881,18 @@
final = sbsp->smk_default;
/*
+ * If this is the root inode the superblock
+ * may be in the process of initialization.
+ * If that is the case use the root value out
+ * of the superblock.
+ */
+ if (opt_dentry->d_parent == opt_dentry) {
+ isp->smk_inode = sbsp->smk_root;
+ isp->smk_flags |= SMK_INODE_INSTANT;
+ goto unlockandout;
+ }
+
+ /*
* This is pretty hackish.
* Casey says that we shouldn't have to do
* file system specific code, but it does help
diff --git a/sound/Kconfig b/sound/Kconfig
index b2a2db4..4247406 100644
--- a/sound/Kconfig
+++ b/sound/Kconfig
@@ -28,11 +28,6 @@
and read <file:Documentation/sound/oss/README.modules>; the module
will be called soundcore.
- I'm told that even without a sound card, you can make your computer
- say more than an occasional beep, by programming the PC speaker.
- Kernel patches and supporting utilities to do that are in the pcsp
- package, available at <ftp://ftp.infradead.org/pub/pcsp/>.
-
source "sound/oss/dmasound/Kconfig"
if !M68K
diff --git a/sound/core/sound.c b/sound/core/sound.c
index 812f91b..6c8ab48 100644
--- a/sound/core/sound.c
+++ b/sound/core/sound.c
@@ -259,8 +259,9 @@
return minor;
}
snd_minors[minor] = preg;
- preg->dev = device_create(sound_class, device, MKDEV(major, minor),
- "%s", name);
+ preg->dev = device_create_drvdata(sound_class, device,
+ MKDEV(major, minor),
+ private_data, "%s", name);
if (IS_ERR(preg->dev)) {
snd_minors[minor] = NULL;
mutex_unlock(&sound_mutex);
@@ -269,9 +270,6 @@
return minor;
}
- if (preg->dev)
- dev_set_drvdata(preg->dev, private_data);
-
mutex_unlock(&sound_mutex);
return 0;
}
diff --git a/sound/drivers/Kconfig b/sound/drivers/Kconfig
index 379bcb0..602b58e 100644
--- a/sound/drivers/Kconfig
+++ b/sound/drivers/Kconfig
@@ -5,9 +5,10 @@
config SND_PCSP
- tristate "PC-Speaker support"
+ tristate "PC-Speaker support (READ HELP!)"
depends on PCSPKR_PLATFORM && X86_PC && HIGH_RES_TIMERS
depends on INPUT
+ depends on EXPERIMENTAL
depends on SND
select SND_PCM
help
@@ -18,11 +19,21 @@
You can compile this as a module which will be called snd-pcsp.
+ WARNING: if you already have a soundcard, enabling this
+ driver may lead to a problem. Namely, it may get loaded
+ before the other sound driver of yours, making the
+ pc-speaker a default sound device. Which is likely not
+ what you want. To make this driver play nicely with other
+ sound driver, you can add this into your /etc/modprobe.conf:
+ options snd-pcsp index=2
+
You don't need this driver if you only want your pc-speaker to beep.
You don't need this driver if you have a tablet piezo beeper
in your PC instead of the real speaker.
- It should not hurt to say Y or M here in all other cases.
+ Say N if you have a sound card.
+ Say M if you don't.
+ Say Y only if you really know what you do.
config SND_MPU401_UART
tristate
diff --git a/sound/drivers/pcsp/pcsp.c b/sound/drivers/pcsp/pcsp.c
index 54a1f90..1899cf0 100644
--- a/sound/drivers/pcsp/pcsp.c
+++ b/sound/drivers/pcsp/pcsp.c
@@ -96,7 +96,7 @@
return -EINVAL;
hrtimer_init(&pcsp_chip.timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
- pcsp_chip.timer.cb_mode = HRTIMER_CB_IRQSAFE;
+ pcsp_chip.timer.cb_mode = HRTIMER_CB_SOFTIRQ;
pcsp_chip.timer.function = pcsp_do_timer;
card = snd_card_new(index, id, THIS_MODULE, 0);
diff --git a/sound/drivers/pcsp/pcsp.h b/sound/drivers/pcsp/pcsp.h
index f07cc1e..1d661f7 100644
--- a/sound/drivers/pcsp/pcsp.h
+++ b/sound/drivers/pcsp/pcsp.h
@@ -24,7 +24,8 @@
/* default timer freq for PC-Speaker: 18643 Hz */
#define DIV_18KHZ 64
#define MAX_DIV DIV_18KHZ
-#define CUR_DIV() (MAX_DIV >> chip->treble)
+#define CALC_DIV(d) (MAX_DIV >> (d))
+#define CUR_DIV() CALC_DIV(chip->treble)
#define PCSP_MAX_TREBLE 1
/* unfortunately, with hrtimers 37KHz does not work very well :( */
@@ -36,7 +37,8 @@
#define PCSP_DEFAULT_SDIV (DIV_18KHZ >> 1)
#define PCSP_DEFAULT_SRATE (PIT_TICK_RATE / PCSP_DEFAULT_SDIV)
#define PCSP_INDEX_INC() (1 << (PCSP_MAX_TREBLE - chip->treble))
-#define PCSP_RATE() (PIT_TICK_RATE / CUR_DIV())
+#define PCSP_CALC_RATE(i) (PIT_TICK_RATE / CALC_DIV(i))
+#define PCSP_RATE() PCSP_CALC_RATE(chip->treble)
#define PCSP_MIN_RATE__1 MAX_DIV/PIT_TICK_RATE
#define PCSP_MAX_RATE__1 MIN_DIV/PIT_TICK_RATE
#define PCSP_MAX_PERIOD_NS (1000000000ULL * PCSP_MIN_RATE__1)
diff --git a/sound/drivers/pcsp/pcsp_lib.c b/sound/drivers/pcsp/pcsp_lib.c
index ac6238e..e341f3f 100644
--- a/sound/drivers/pcsp/pcsp_lib.c
+++ b/sound/drivers/pcsp/pcsp_lib.c
@@ -9,7 +9,6 @@
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <sound/pcm.h>
-#include <linux/interrupt.h>
#include <asm/io.h>
#include "pcsp.h"
@@ -18,36 +17,12 @@
MODULE_PARM_DESC(nforce_wa, "Apply NForce chipset workaround "
"(expect bad sound)");
-static void pcsp_start_timer(unsigned long dummy)
-{
- hrtimer_start(&pcsp_chip.timer, ktime_set(0, 0), HRTIMER_MODE_REL);
-}
-
-/*
- * We need the hrtimer_start as a tasklet to avoid
- * the nasty locking problem. :(
- * The problem:
- * - The timer handler is called with the cpu_base->lock
- * already held by hrtimer code.
- * - snd_pcm_period_elapsed() takes the
- * substream->self_group.lock.
- * So far so good.
- * But the snd_pcsp_trigger() is called with the
- * substream->self_group.lock held, and it calls
- * hrtimer_start(), which takes the cpu_base->lock.
- * You see the problem. We have the code pathes
- * which take two locks in a reverse order. This
- * can deadlock and the lock validator complains.
- * The only solution I could find was to move the
- * hrtimer_start() into a tasklet. -stsp
- */
-static DECLARE_TASKLET(pcsp_start_timer_tasklet, pcsp_start_timer, 0);
+#define DMIX_WANTS_S16 1
enum hrtimer_restart pcsp_do_timer(struct hrtimer *handle)
{
- unsigned long flags;
unsigned char timer_cnt, val;
- int periods_elapsed;
+ int fmt_size, periods_elapsed;
u64 ns;
size_t period_bytes, buffer_bytes;
struct snd_pcm_substream *substream;
@@ -64,9 +39,7 @@
return HRTIMER_RESTART;
}
- /* hrtimer calls us from both hardirq and softirq contexts,
- * so irqsave :( */
- spin_lock_irqsave(&chip->substream_lock, flags);
+ spin_lock_irq(&chip->substream_lock);
/* Takashi Iwai says regarding this extra lock:
If the irq handler handles some data on the DMA buffer, it should
@@ -92,8 +65,11 @@
goto exit_nr_unlock2;
runtime = substream->runtime;
- /* assume it is u8 mono */
- val = runtime->dma_area[chip->playback_ptr];
+ fmt_size = snd_pcm_format_physical_width(runtime->format) >> 3;
+ /* assume it is mono! */
+ val = runtime->dma_area[chip->playback_ptr + fmt_size - 1];
+ if (snd_pcm_format_signed(runtime->format))
+ val ^= 0x80;
timer_cnt = val * CUR_DIV() / 256;
if (timer_cnt && chip->enable) {
@@ -111,12 +87,14 @@
period_bytes = snd_pcm_lib_period_bytes(substream);
buffer_bytes = snd_pcm_lib_buffer_bytes(substream);
- chip->playback_ptr += PCSP_INDEX_INC();
+ chip->playback_ptr += PCSP_INDEX_INC() * fmt_size;
periods_elapsed = chip->playback_ptr - chip->period_ptr;
if (periods_elapsed < 0) {
- printk(KERN_WARNING "PCSP: playback_ptr inconsistent "
+#if PCSP_DEBUG
+ printk(KERN_INFO "PCSP: buffer_bytes mod period_bytes != 0 ? "
"(%zi %zi %zi)\n",
chip->playback_ptr, period_bytes, buffer_bytes);
+#endif
periods_elapsed += buffer_bytes;
}
periods_elapsed /= period_bytes;
@@ -132,7 +110,7 @@
chip->period_ptr %= buffer_bytes;
}
- spin_unlock_irqrestore(&chip->substream_lock, flags);
+ spin_unlock_irq(&chip->substream_lock);
if (!atomic_read(&chip->timer_active))
return HRTIMER_NORESTART;
@@ -146,7 +124,7 @@
exit_nr_unlock2:
snd_pcm_stream_unlock(substream);
exit_nr_unlock1:
- spin_unlock_irqrestore(&chip->substream_lock, flags);
+ spin_unlock_irq(&chip->substream_lock);
return HRTIMER_NORESTART;
}
@@ -167,7 +145,7 @@
atomic_set(&chip->timer_active, 1);
chip->thalf = 0;
- tasklet_schedule(&pcsp_start_timer_tasklet);
+ hrtimer_start(&pcsp_chip.timer, ktime_set(0, 0), HRTIMER_MODE_REL);
}
static void pcsp_stop_playing(struct snd_pcsp *chip)
@@ -270,7 +248,11 @@
.info = (SNDRV_PCM_INFO_INTERLEAVED |
SNDRV_PCM_INFO_HALF_DUPLEX |
SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID),
- .formats = SNDRV_PCM_FMTBIT_U8,
+ .formats = (SNDRV_PCM_FMTBIT_U8
+#if DMIX_WANTS_S16
+ | SNDRV_PCM_FMTBIT_S16_LE
+#endif
+ ),
.rates = SNDRV_PCM_RATE_KNOT,
.rate_min = PCSP_DEFAULT_SRATE,
.rate_max = PCSP_DEFAULT_SRATE,
diff --git a/sound/drivers/pcsp/pcsp_mixer.c b/sound/drivers/pcsp/pcsp_mixer.c
index 64a695f..caeb0f5 100644
--- a/sound/drivers/pcsp/pcsp_mixer.c
+++ b/sound/drivers/pcsp/pcsp_mixer.c
@@ -50,7 +50,8 @@
uinfo->value.enumerated.items = chip->max_treble + 1;
if (uinfo->value.enumerated.item > chip->max_treble)
uinfo->value.enumerated.item = chip->max_treble;
- sprintf(uinfo->value.enumerated.name, "%d", PCSP_RATE());
+ sprintf(uinfo->value.enumerated.name, "%d",
+ PCSP_CALC_RATE(uinfo->value.enumerated.item));
return 0;
}
diff --git a/sound/oss/Kconfig b/sound/oss/Kconfig
index 857008b..3be2dc1 100644
--- a/sound/oss/Kconfig
+++ b/sound/oss/Kconfig
@@ -79,7 +79,7 @@
config SOUND_MSNDCLAS
tristate "Support for Turtle Beach MultiSound Classic, Tahiti, Monterey"
- depends on SOUND_PRIME && (m || !STANDALONE)
+ depends on SOUND_PRIME && (m || !STANDALONE) && ISA
help
Say M here if you have a Turtle Beach MultiSound Classic, Tahiti or
Monterey (not for the Pinnacle or Fiji).
@@ -143,7 +143,7 @@
config SOUND_MSNDPIN
tristate "Support for Turtle Beach MultiSound Pinnacle, Fiji"
- depends on SOUND_PRIME && (m || !STANDALONE)
+ depends on SOUND_PRIME && (m || !STANDALONE) && ISA
help
Say M here if you have a Turtle Beach MultiSound Pinnacle or Fiji.
See <file:Documentation/sound/oss/MultiSound> for important information
diff --git a/sound/pci/ac97/ac97_patch.c b/sound/pci/ac97/ac97_patch.c
index 2da8981..1292dce 100644
--- a/sound/pci/ac97/ac97_patch.c
+++ b/sound/pci/ac97/ac97_patch.c
@@ -1971,6 +1971,9 @@
val = ac97->regs[AC97_AD_MISC];
ucontrol->value.integer.value[0] = !(val & AC97_AD198X_LOSEL);
+ if (ac97->spec.ad18xx.lo_as_master)
+ ucontrol->value.integer.value[0] =
+ !ucontrol->value.integer.value[0];
return 0;
}
@@ -1979,8 +1982,10 @@
struct snd_ac97 *ac97 = snd_kcontrol_chip(kcontrol);
unsigned short val;
- val = !ucontrol->value.integer.value[0]
- ? (AC97_AD198X_LOSEL | AC97_AD198X_HPSEL) : 0;
+ val = !ucontrol->value.integer.value[0];
+ if (ac97->spec.ad18xx.lo_as_master)
+ val = !val;
+ val = val ? (AC97_AD198X_LOSEL | AC97_AD198X_HPSEL) : 0;
return snd_ac97_update_bits(ac97, AC97_AD_MISC,
AC97_AD198X_LOSEL | AC97_AD198X_HPSEL, val);
}
@@ -2031,7 +2036,7 @@
{
unsigned short val = 0;
/* clear LODIS if shared jack is to be used for Surround out */
- if (is_shared_linein(ac97))
+ if (!ac97->spec.ad18xx.lo_as_master && is_shared_linein(ac97))
val |= (1 << 12);
/* clear CLDIS if shared jack is to be used for C/LFE out */
if (is_shared_micin(ac97))
@@ -2067,9 +2072,13 @@
static int patch_ad1888_specific(struct snd_ac97 *ac97)
{
- /* rename 0x04 as "Master" and 0x02 as "Master Surround" */
- snd_ac97_rename_vol_ctl(ac97, "Master Playback", "Master Surround Playback");
- snd_ac97_rename_vol_ctl(ac97, "Headphone Playback", "Master Playback");
+ if (!ac97->spec.ad18xx.lo_as_master) {
+ /* rename 0x04 as "Master" and 0x02 as "Master Surround" */
+ snd_ac97_rename_vol_ctl(ac97, "Master Playback",
+ "Master Surround Playback");
+ snd_ac97_rename_vol_ctl(ac97, "Headphone Playback",
+ "Master Playback");
+ }
return patch_build_controls(ac97, snd_ac97_ad1888_controls, ARRAY_SIZE(snd_ac97_ad1888_controls));
}
@@ -2088,16 +2097,27 @@
patch_ad1881(ac97);
ac97->build_ops = &patch_ad1888_build_ops;
- /* Switch FRONT/SURROUND LINE-OUT/HP-OUT default connection */
- /* it seems that most vendors connect line-out connector to headphone out of AC'97 */
+
+ /*
+ * LO can be used as a real line-out on some devices,
+ * and we need to revert the front/surround mixer switches
+ */
+ if (ac97->subsystem_vendor == 0x1043 &&
+ ac97->subsystem_device == 0x1193) /* ASUS A9T laptop */
+ ac97->spec.ad18xx.lo_as_master = 1;
+
+ misc = snd_ac97_read(ac97, AC97_AD_MISC);
/* AD-compatible mode */
/* Stereo mutes enabled */
- misc = snd_ac97_read(ac97, AC97_AD_MISC);
- snd_ac97_write_cache(ac97, AC97_AD_MISC, misc |
- AC97_AD198X_LOSEL |
- AC97_AD198X_HPSEL |
- AC97_AD198X_MSPLT |
- AC97_AD198X_AC97NC);
+ misc |= AC97_AD198X_MSPLT | AC97_AD198X_AC97NC;
+ if (!ac97->spec.ad18xx.lo_as_master)
+ /* Switch FRONT/SURROUND LINE-OUT/HP-OUT default connection */
+ /* it seems that most vendors connect line-out connector to
+ * headphone out of AC'97
+ */
+ misc |= AC97_AD198X_LOSEL | AC97_AD198X_HPSEL;
+
+ snd_ac97_write_cache(ac97, AC97_AD_MISC, misc);
ac97->flags |= AC97_STEREO_MUTES;
return 0;
}
diff --git a/sound/pci/emu10k1/emu10k1_main.c b/sound/pci/emu10k1/emu10k1_main.c
index abde5b9..548c9cc 100644
--- a/sound/pci/emu10k1/emu10k1_main.c
+++ b/sound/pci/emu10k1/emu10k1_main.c
@@ -1818,13 +1818,6 @@
}
emu->port = pci_resource_start(pci, 0);
- if (request_irq(pci->irq, snd_emu10k1_interrupt, IRQF_SHARED,
- "EMU10K1", emu)) {
- err = -EBUSY;
- goto error;
- }
- emu->irq = pci->irq;
-
emu->max_cache_pages = max_cache_bytes >> PAGE_SHIFT;
if (snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, snd_dma_pci_data(pci),
32 * 1024, &emu->ptb_pages) < 0) {
@@ -1887,6 +1880,14 @@
emu->fx8010.etram_pages.area = NULL;
emu->fx8010.etram_pages.bytes = 0;
+ /* irq handler must be registered after I/O ports are activated */
+ if (request_irq(pci->irq, snd_emu10k1_interrupt, IRQF_SHARED,
+ "EMU10K1", emu)) {
+ err = -EBUSY;
+ goto error;
+ }
+ emu->irq = pci->irq;
+
/*
* Init to 0x02109204 :
* Clock accuracy = 0 (1000ppm)
diff --git a/sound/pci/hda/patch_analog.c b/sound/pci/hda/patch_analog.c
index e0a605a..a99e86d 100644
--- a/sound/pci/hda/patch_analog.c
+++ b/sound/pci/hda/patch_analog.c
@@ -2858,6 +2858,7 @@
static struct snd_pci_quirk ad1988_cfg_tbl[] = {
SND_PCI_QUIRK(0x1043, 0x81ec, "Asus P5B-DLX", AD1988_6STACK_DIG),
SND_PCI_QUIRK(0x1043, 0x81f6, "Asus M2N-SLI", AD1988_6STACK_DIG),
+ SND_PCI_QUIRK(0x1043, 0x8277, "Asus P5K-E/WIFI-AP", AD1988_6STACK_DIG),
{}
};
@@ -3643,33 +3644,17 @@
{ } /* end */
};
-static struct hda_input_mux ad1884a_mobile_capture_source = {
- .num_items = 2,
- .items = {
- { "Mic", 0x1 }, /* port-C */
- { "Mix", 0x3 },
- },
-};
-
static struct snd_kcontrol_new ad1884a_mobile_mixers[] = {
HDA_CODEC_VOLUME("Master Playback Volume", 0x21, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE("Master Playback Switch", 0x21, 0x0, HDA_OUTPUT),
HDA_CODEC_VOLUME("PCM Playback Volume", 0x20, 0x5, HDA_INPUT),
HDA_CODEC_MUTE("PCM Playback Switch", 0x20, 0x5, HDA_INPUT),
- HDA_CODEC_VOLUME("Mic Playback Volume", 0x20, 0x01, HDA_INPUT),
- HDA_CODEC_MUTE("Mic Playback Switch", 0x20, 0x01, HDA_INPUT),
HDA_CODEC_VOLUME("Beep Playback Volume", 0x20, 0x03, HDA_INPUT),
HDA_CODEC_MUTE("Beep Playback Switch", 0x20, 0x03, HDA_INPUT),
- HDA_CODEC_VOLUME("Mic Boost", 0x15, 0x0, HDA_INPUT),
+ HDA_CODEC_VOLUME("Mic Capture Volume", 0x14, 0x0, HDA_INPUT),
+ HDA_CODEC_VOLUME("Internal Mic Capture Volume", 0x15, 0x0, HDA_INPUT),
HDA_CODEC_VOLUME("Capture Volume", 0x0c, 0x0, HDA_OUTPUT),
HDA_CODEC_MUTE("Capture Switch", 0x0c, 0x0, HDA_OUTPUT),
- {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .name = "Capture Source",
- .info = ad198x_mux_enum_info,
- .get = ad198x_mux_enum_get,
- .put = ad198x_mux_enum_put,
- },
{ } /* end */
};
@@ -3686,14 +3671,31 @@
present ? 0x00 : 0x02);
}
+/* switch to external mic if plugged */
+static void ad1884a_hp_automic(struct hda_codec *codec)
+{
+ unsigned int present;
+
+ present = snd_hda_codec_read(codec, 0x14, 0,
+ AC_VERB_GET_PIN_SENSE, 0) & 0x80000000;
+ snd_hda_codec_write(codec, 0x0c, 0, AC_VERB_SET_CONNECT_SEL,
+ present ? 0 : 1);
+}
+
#define AD1884A_HP_EVENT 0x37
+#define AD1884A_MIC_EVENT 0x36
/* unsolicited event for HP jack sensing */
static void ad1884a_hp_unsol_event(struct hda_codec *codec, unsigned int res)
{
- if ((res >> 26) != AD1884A_HP_EVENT)
- return;
- ad1884a_hp_automute(codec);
+ switch (res >> 26) {
+ case AD1884A_HP_EVENT:
+ ad1884a_hp_automute(codec);
+ break;
+ case AD1884A_MIC_EVENT:
+ ad1884a_hp_automic(codec);
+ break;
+ }
}
/* initialize jack-sensing, too */
@@ -3701,6 +3703,7 @@
{
ad198x_init(codec);
ad1884a_hp_automute(codec);
+ ad1884a_hp_automic(codec);
return 0;
}
@@ -3714,10 +3717,15 @@
/* Port-F pin */
{0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
{0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},
+ /* Port-C pin - internal mic-in */
+ {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
+ {0x14, AC_VERB_SET_AMP_GAIN_MUTE, 0x7002}, /* raise mic as default */
+ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0x7002}, /* raise mic as default */
/* analog mix */
{0x20, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)},
/* unsolicited event for pin-sense */
{0x11, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | AD1884A_HP_EVENT},
+ {0x14, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | AD1884A_MIC_EVENT},
{ } /* end */
};
@@ -3877,7 +3885,6 @@
spec->mixers[0] = ad1884a_mobile_mixers;
spec->init_verbs[spec->num_init_verbs++] = ad1884a_laptop_verbs;
spec->multiout.dig_out_nid = 0;
- spec->input_mux = &ad1884a_mobile_capture_source;
codec->patch_ops.unsol_event = ad1884a_hp_unsol_event;
codec->patch_ops.init = ad1884a_hp_init;
break;
diff --git a/sound/pci/hda/patch_cmedia.c b/sound/pci/hda/patch_cmedia.c
index c73ce07..6ef57fb 100644
--- a/sound/pci/hda/patch_cmedia.c
+++ b/sound/pci/hda/patch_cmedia.c
@@ -611,6 +611,7 @@
static struct snd_pci_quirk cmi9880_cfg_tbl[] = {
SND_PCI_QUIRK(0x1043, 0x813d, "ASUS P5AD2", CMI_FULL_DIG),
+ SND_PCI_QUIRK(0x1854, 0x002b, "LG LS75", CMI_MINIMAL),
SND_PCI_QUIRK(0x1854, 0x0032, "LG", CMI_FULL_DIG),
{} /* terminator */
};
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 6d4df45..b0a2a26 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -853,6 +853,7 @@
case 0x10ec0269:
case 0x10ec0862:
case 0x10ec0662:
+ case 0x10ec0889:
snd_hda_codec_write(codec, 0x14, 0,
AC_VERB_SET_EAPD_BTLENABLE, 2);
snd_hda_codec_write(codec, 0x15, 0,
@@ -877,6 +878,7 @@
case 0x10ec0883:
case 0x10ec0885:
case 0x10ec0888:
+ case 0x10ec0889:
snd_hda_codec_write(codec, 0x20, 0,
AC_VERB_SET_COEF_INDEX, 7);
tmp = snd_hda_codec_read(codec, 0x20, 0,
@@ -940,7 +942,6 @@
AC_VERB_SET_UNSOLICITED_ENABLE,
AC_USRSP_EN | ALC880_HP_EVENT);
spec->unsol_event = alc_sku_unsol_event;
- spec->init_hook = alc_sku_automute;
}
/*
@@ -2981,7 +2982,7 @@
/* SND_PCI_QUIRK(0x1043, 0x1964, "ASUS", ALC880_ASUS_DIG), */
SND_PCI_QUIRK(0x1043, 0x1973, "ASUS", ALC880_ASUS_DIG),
SND_PCI_QUIRK(0x1043, 0x19b3, "ASUS", ALC880_ASUS_DIG),
- SND_PCI_QUIRK(0x1043, 0x814e, "ASUS", ALC880_ASUS),
+ SND_PCI_QUIRK(0x1043, 0x814e, "ASUS P5GD1 w/SPDIF", ALC880_6ST_DIG),
SND_PCI_QUIRK(0x1043, 0x8181, "ASUS P4GPL", ALC880_ASUS_DIG),
SND_PCI_QUIRK(0x1043, 0x8196, "ASUS P5GD1", ALC880_6ST),
SND_PCI_QUIRK(0x1043, 0x81b4, "ASUS", ALC880_6ST),
@@ -7743,6 +7744,7 @@
SND_PCI_QUIRK(0x103c, 0x2a60, "HP Lucknow", ALC888_3ST_HP),
SND_PCI_QUIRK(0x103c, 0x2a61, "HP Nettle", ALC883_6ST_DIG),
SND_PCI_QUIRK(0x1043, 0x8249, "Asus M2A-VM HDMI", ALC883_3ST_6ch_DIG),
+ SND_PCI_QUIRK(0x105b, 0x0ce8, "Foxconn P35AX-S", ALC883_6ST_DIG),
SND_PCI_QUIRK(0x105b, 0x6668, "Foxconn", ALC883_6ST_DIG),
SND_PCI_QUIRK(0x1071, 0x8253, "Mitac 8252d", ALC883_MITAC),
SND_PCI_QUIRK(0x1071, 0x8258, "Evesham Voyaeger", ALC883_LAPTOP_EAPD),
@@ -8640,6 +8642,7 @@
{0x15, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC880_HP_EVENT},
{0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP},
+ {}
};
/* mute/unmute internal speaker according to the hp jack and mute state */
@@ -8757,35 +8760,39 @@
},
};
-/* mute/unmute internal speaker according to the hp jack and mute state */
+/* mute/unmute internal speaker according to the hp jacks and mute state */
static void alc262_fujitsu_automute(struct hda_codec *codec, int force)
{
struct alc_spec *spec = codec->spec;
unsigned int mute;
if (force || !spec->sense_updated) {
- unsigned int present_int_hp, present_dock_hp;
+ unsigned int present;
/* need to execute and sync at first */
snd_hda_codec_read(codec, 0x14, 0, AC_VERB_SET_PIN_SENSE, 0);
- present_int_hp = snd_hda_codec_read(codec, 0x14, 0,
- AC_VERB_GET_PIN_SENSE, 0);
- snd_hda_codec_read(codec, 0x1B, 0, AC_VERB_SET_PIN_SENSE, 0);
- present_dock_hp = snd_hda_codec_read(codec, 0x1b, 0,
- AC_VERB_GET_PIN_SENSE, 0);
- spec->jack_present = (present_int_hp & 0x80000000) != 0;
- spec->jack_present |= (present_dock_hp & 0x80000000) != 0;
+ /* check laptop HP jack */
+ present = snd_hda_codec_read(codec, 0x14, 0,
+ AC_VERB_GET_PIN_SENSE, 0);
+ /* need to execute and sync at first */
+ snd_hda_codec_read(codec, 0x1b, 0, AC_VERB_SET_PIN_SENSE, 0);
+ /* check docking HP jack */
+ present |= snd_hda_codec_read(codec, 0x1b, 0,
+ AC_VERB_GET_PIN_SENSE, 0);
+ if (present & AC_PINSENSE_PRESENCE)
+ spec->jack_present = 1;
+ else
+ spec->jack_present = 0;
spec->sense_updated = 1;
}
- if (spec->jack_present) {
- /* mute internal speaker */
- snd_hda_codec_amp_stereo(codec, 0x15, HDA_OUTPUT, 0,
- HDA_AMP_MUTE, HDA_AMP_MUTE);
- } else {
- /* unmute internal speaker if necessary */
+ /* unmute internal speaker only if both HPs are unplugged and
+ * master switch is on
+ */
+ if (spec->jack_present)
+ mute = HDA_AMP_MUTE;
+ else
mute = snd_hda_codec_amp_read(codec, 0x14, 0, HDA_OUTPUT, 0);
- snd_hda_codec_amp_stereo(codec, 0x15, HDA_OUTPUT, 0,
- HDA_AMP_MUTE, mute);
- }
+ snd_hda_codec_amp_stereo(codec, 0x15, HDA_OUTPUT, 0,
+ HDA_AMP_MUTE, mute);
}
/* unsolicited event for HP jack sensing */
@@ -8797,6 +8804,11 @@
alc262_fujitsu_automute(codec, 1);
}
+static void alc262_fujitsu_init_hook(struct hda_codec *codec)
+{
+ alc262_fujitsu_automute(codec, 1);
+}
+
/* bind volumes of both NID 0x0c and 0x0d */
static struct hda_bind_ctls alc262_fujitsu_bind_master_vol = {
.ops = &snd_hda_bind_vol,
@@ -9570,6 +9582,7 @@
.channel_mode = alc262_modes,
.input_mux = &alc262_fujitsu_capture_source,
.unsol_event = alc262_fujitsu_unsol_event,
+ .init_hook = alc262_fujitsu_init_hook,
},
[ALC262_HP_BPC] = {
.mixers = { alc262_HP_BPC_mixer },
@@ -10500,6 +10513,7 @@
SND_PCI_QUIRK(0x1043, 0x1205, "ASUS W7J", ALC268_3ST),
SND_PCI_QUIRK(0x1179, 0xff10, "TOSHIBA A205", ALC268_TOSHIBA),
SND_PCI_QUIRK(0x1179, 0xff50, "TOSHIBA A305", ALC268_TOSHIBA),
+ SND_PCI_QUIRK(0x14c0, 0x0025, "COMPAL IFL90/JFL-92", ALC268_TOSHIBA),
SND_PCI_QUIRK(0x152d, 0x0763, "Diverse (CPR2000)", ALC268_ACER),
SND_PCI_QUIRK(0x152d, 0x0771, "Quanta IL1", ALC267_QUANTA_IL1),
SND_PCI_QUIRK(0x1170, 0x0040, "ZEPTO", ALC268_ZEPTO),
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 393f7fd..a4f44a0 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -840,7 +840,7 @@
static struct snd_kcontrol_new stac925x_mixer[] = {
STAC_INPUT_SOURCE(1),
HDA_CODEC_VOLUME("Capture Volume", 0x09, 0, HDA_OUTPUT),
- HDA_CODEC_MUTE("Capture Switch", 0x09, 0, HDA_OUTPUT),
+ HDA_CODEC_MUTE("Capture Switch", 0x14, 0, HDA_OUTPUT),
HDA_CODEC_VOLUME("Capture Mux Volume", 0x0f, 0, HDA_OUTPUT),
{ } /* end */
};
diff --git a/sound/pci/hda/patch_via.c b/sound/pci/hda/patch_via.c
index 52b1d81..e7e4352 100644
--- a/sound/pci/hda/patch_via.c
+++ b/sound/pci/hda/patch_via.c
@@ -447,6 +447,23 @@
},
};
+static struct hda_pcm_stream vt1708_pcm_analog_s16_playback = {
+ .substreams = 1,
+ .channels_min = 2,
+ .channels_max = 8,
+ .nid = 0x10, /* NID to query formats and rates */
+ /* We got noisy outputs on the right channel on VT1708 when
+ * 24bit samples are used. Until any workaround is found,
+ * disable the 24bit format, so far.
+ */
+ .formats = SNDRV_PCM_FMTBIT_S16_LE,
+ .ops = {
+ .open = via_playback_pcm_open,
+ .prepare = via_playback_pcm_prepare,
+ .cleanup = via_playback_pcm_cleanup
+ },
+};
+
static struct hda_pcm_stream vt1708_pcm_analog_capture = {
.substreams = 2,
.channels_min = 2,
@@ -899,6 +916,9 @@
spec->stream_name_analog = "VT1708 Analog";
spec->stream_analog_playback = &vt1708_pcm_analog_playback;
+ /* disable 32bit format on VT1708 */
+ if (codec->vendor_id == 0x11061708)
+ spec->stream_analog_playback = &vt1708_pcm_analog_s16_playback;
spec->stream_analog_capture = &vt1708_pcm_analog_capture;
spec->stream_name_digital = "VT1708 Digital";
diff --git a/sound/soc/codecs/tlv320aic3x.c b/sound/soc/codecs/tlv320aic3x.c
index 630684f..09b1661 100644
--- a/sound/soc/codecs/tlv320aic3x.c
+++ b/sound/soc/codecs/tlv320aic3x.c
@@ -539,8 +539,8 @@
{"HPRCOM", NULL, "Right HP Com"},
/* Mono Output */
- {"MONOLOUT", NULL, "Mono Out"},
- {"MONOLOUT", NULL, "Mono Out"},
+ {"MONO_LOUT", NULL, "Mono Out"},
+ {"MONO_LOUT", NULL, "Mono Out"},
/* Left Input */
{"Left Line1L Mux", "single-ended", "LINE1L"},
diff --git a/sound/soc/fsl/fsl_ssi.c b/sound/soc/fsl/fsl_ssi.c
index b2a11b0..f588545 100644
--- a/sound/soc/fsl/fsl_ssi.c
+++ b/sound/soc/fsl/fsl_ssi.c
@@ -416,7 +416,7 @@
* to put data into its FIFO. Without it, ALSA starts
* to complain about overruns.
*/
- msleep(1);
+ mdelay(1);
}
break;
diff --git a/sound/soc/omap/n810.c b/sound/soc/omap/n810.c
index 83b1eb4..6533563 100644
--- a/sound/soc/omap/n810.c
+++ b/sound/soc/omap/n810.c
@@ -188,8 +188,8 @@
static const char *spk_function[] = {"Off", "On"};
static const char *jack_function[] = {"Off", "Headphone"};
static const struct soc_enum n810_enum[] = {
- SOC_ENUM_SINGLE_EXT(2, spk_function),
- SOC_ENUM_SINGLE_EXT(3, jack_function),
+ SOC_ENUM_SINGLE_EXT(ARRAY_SIZE(spk_function), spk_function),
+ SOC_ENUM_SINGLE_EXT(ARRAY_SIZE(jack_function), jack_function),
};
static const struct snd_kcontrol_new aic33_n810_controls[] = {
diff --git a/sound/synth/emux/emux_synth.c b/sound/synth/emux/emux_synth.c
index 478369b..b343818 100644
--- a/sound/synth/emux/emux_synth.c
+++ b/sound/synth/emux/emux_synth.c
@@ -341,8 +341,12 @@
case MIDI_CTL_SOFT_PEDAL:
#ifdef SNDRV_EMUX_USE_RAW_EFFECT
/* FIXME: this is an emulation */
- snd_emux_send_effect(port, chan, EMUX_FX_CUTOFF, -160,
+ if (chan->control[type] >= 64)
+ snd_emux_send_effect(port, chan, EMUX_FX_CUTOFF, -160,
EMUX_FX_FLAG_ADD);
+ else
+ snd_emux_send_effect(port, chan, EMUX_FX_CUTOFF, 0,
+ EMUX_FX_FLAG_OFF);
#endif
break;
diff --git a/sound/usb/caiaq/caiaq-device.c b/sound/usb/caiaq/caiaq-device.c
index e97d8b2..a972f77 100644
--- a/sound/usb/caiaq/caiaq-device.c
+++ b/sound/usb/caiaq/caiaq-device.c
@@ -351,8 +351,8 @@
dev = caiaqdev(card);
dev->chip.dev = usb_dev;
dev->chip.card = card;
- dev->chip.usb_id = USB_ID(usb_dev->descriptor.idVendor,
- usb_dev->descriptor.idProduct);
+ dev->chip.usb_id = USB_ID(le16_to_cpu(usb_dev->descriptor.idVendor),
+ le16_to_cpu(usb_dev->descriptor.idProduct));
spin_lock_init(&dev->spinlock);
snd_card_set_dev(card, &usb_dev->dev);
diff --git a/virt/kvm/ioapic.c b/virt/kvm/ioapic.c
index 4232fd7..98778cb 100644
--- a/virt/kvm/ioapic.c
+++ b/virt/kvm/ioapic.c
@@ -45,7 +45,7 @@
#else
#define ioapic_debug(fmt, arg...)
#endif
-static void ioapic_deliver(struct kvm_ioapic *vioapic, int irq);
+static int ioapic_deliver(struct kvm_ioapic *vioapic, int irq);
static unsigned long ioapic_read_indirect(struct kvm_ioapic *ioapic,
unsigned long addr,
@@ -89,8 +89,8 @@
pent = &ioapic->redirtbl[idx];
if (!pent->fields.mask) {
- ioapic_deliver(ioapic, idx);
- if (pent->fields.trig_mode == IOAPIC_LEVEL_TRIG)
+ int injected = ioapic_deliver(ioapic, idx);
+ if (injected && pent->fields.trig_mode == IOAPIC_LEVEL_TRIG)
pent->fields.remote_irr = 1;
}
if (!pent->fields.trig_mode)
@@ -133,7 +133,7 @@
}
}
-static void ioapic_inj_irq(struct kvm_ioapic *ioapic,
+static int ioapic_inj_irq(struct kvm_ioapic *ioapic,
struct kvm_vcpu *vcpu,
u8 vector, u8 trig_mode, u8 delivery_mode)
{
@@ -143,7 +143,7 @@
ASSERT((delivery_mode == IOAPIC_FIXED) ||
(delivery_mode == IOAPIC_LOWEST_PRIORITY));
- kvm_apic_set_irq(vcpu, vector, trig_mode);
+ return kvm_apic_set_irq(vcpu, vector, trig_mode);
}
static u32 ioapic_get_delivery_bitmask(struct kvm_ioapic *ioapic, u8 dest,
@@ -186,7 +186,7 @@
return mask;
}
-static void ioapic_deliver(struct kvm_ioapic *ioapic, int irq)
+static int ioapic_deliver(struct kvm_ioapic *ioapic, int irq)
{
u8 dest = ioapic->redirtbl[irq].fields.dest_id;
u8 dest_mode = ioapic->redirtbl[irq].fields.dest_mode;
@@ -195,7 +195,7 @@
u8 trig_mode = ioapic->redirtbl[irq].fields.trig_mode;
u32 deliver_bitmask;
struct kvm_vcpu *vcpu;
- int vcpu_id;
+ int vcpu_id, r = 0;
ioapic_debug("dest=%x dest_mode=%x delivery_mode=%x "
"vector=%x trig_mode=%x\n",
@@ -204,7 +204,7 @@
deliver_bitmask = ioapic_get_delivery_bitmask(ioapic, dest, dest_mode);
if (!deliver_bitmask) {
ioapic_debug("no target on destination\n");
- return;
+ return 0;
}
switch (delivery_mode) {
@@ -216,7 +216,7 @@
vcpu = ioapic->kvm->vcpus[0];
#endif
if (vcpu != NULL)
- ioapic_inj_irq(ioapic, vcpu, vector,
+ r = ioapic_inj_irq(ioapic, vcpu, vector,
trig_mode, delivery_mode);
else
ioapic_debug("null lowest prio vcpu: "
@@ -234,7 +234,7 @@
deliver_bitmask &= ~(1 << vcpu_id);
vcpu = ioapic->kvm->vcpus[vcpu_id];
if (vcpu) {
- ioapic_inj_irq(ioapic, vcpu, vector,
+ r = ioapic_inj_irq(ioapic, vcpu, vector,
trig_mode, delivery_mode);
}
}
@@ -246,6 +246,7 @@
delivery_mode);
break;
}
+ return r;
}
void kvm_ioapic_set_irq(struct kvm_ioapic *ioapic, int irq, int level)
diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c
index f7ba099..2d29e26 100644
--- a/virt/kvm/kvm_main.c
+++ b/virt/kvm/kvm_main.c
@@ -758,25 +758,26 @@
*/
void kvm_vcpu_block(struct kvm_vcpu *vcpu)
{
- DECLARE_WAITQUEUE(wait, current);
+ DEFINE_WAIT(wait);
- add_wait_queue(&vcpu->wq, &wait);
+ for (;;) {
+ prepare_to_wait(&vcpu->wq, &wait, TASK_INTERRUPTIBLE);
- /*
- * We will block until either an interrupt or a signal wakes us up
- */
- while (!kvm_cpu_has_interrupt(vcpu)
- && !kvm_cpu_has_pending_timer(vcpu)
- && !signal_pending(current)
- && !kvm_arch_vcpu_runnable(vcpu)) {
- set_current_state(TASK_INTERRUPTIBLE);
+ if (kvm_cpu_has_interrupt(vcpu))
+ break;
+ if (kvm_cpu_has_pending_timer(vcpu))
+ break;
+ if (kvm_arch_vcpu_runnable(vcpu))
+ break;
+ if (signal_pending(current))
+ break;
+
vcpu_put(vcpu);
schedule();
vcpu_load(vcpu);
}
- __set_current_state(TASK_RUNNING);
- remove_wait_queue(&vcpu->wq, &wait);
+ finish_wait(&vcpu->wq, &wait);
}
void kvm_resched(struct kvm_vcpu *vcpu)