| /* |
| * i2c tv tuner chip device driver |
| * controls all those simple 4-control-bytes style tuners. |
| * |
| * This "tuner-simple" module was split apart from the original "tuner" module. |
| */ |
| #include <linux/delay.h> |
| #include <linux/i2c.h> |
| #include <linux/videodev.h> |
| #include <media/tuner.h> |
| #include <media/v4l2-common.h> |
| #include <media/tuner-types.h> |
| #include "tuner-i2c.h" |
| #include "tuner-simple.h" |
| |
| static int debug; |
| module_param(debug, int, 0644); |
| MODULE_PARM_DESC(debug, "enable verbose debug messages"); |
| |
| #define TUNER_SIMPLE_MAX 64 |
| static unsigned int simple_devcount; |
| |
| static int offset; |
| module_param(offset, int, 0664); |
| MODULE_PARM_DESC(offset, "Allows to specify an offset for tuner"); |
| |
| static unsigned int atv_input[TUNER_SIMPLE_MAX] = \ |
| { [0 ... (TUNER_SIMPLE_MAX-1)] = 0 }; |
| static unsigned int dtv_input[TUNER_SIMPLE_MAX] = \ |
| { [0 ... (TUNER_SIMPLE_MAX-1)] = 0 }; |
| module_param_array(atv_input, int, NULL, 0644); |
| module_param_array(dtv_input, int, NULL, 0644); |
| MODULE_PARM_DESC(atv_input, "specify atv rf input, 0 for autoselect"); |
| MODULE_PARM_DESC(dtv_input, "specify dtv rf input, 0 for autoselect"); |
| |
| /* ---------------------------------------------------------------------- */ |
| |
| /* tv standard selection for Temic 4046 FM5 |
| this value takes the low bits of control byte 2 |
| from datasheet Rev.01, Feb.00 |
| standard BG I L L2 D |
| picture IF 38.9 38.9 38.9 33.95 38.9 |
| sound 1 33.4 32.9 32.4 40.45 32.4 |
| sound 2 33.16 |
| NICAM 33.05 32.348 33.05 33.05 |
| */ |
| #define TEMIC_SET_PAL_I 0x05 |
| #define TEMIC_SET_PAL_DK 0x09 |
| #define TEMIC_SET_PAL_L 0x0a /* SECAM ? */ |
| #define TEMIC_SET_PAL_L2 0x0b /* change IF ! */ |
| #define TEMIC_SET_PAL_BG 0x0c |
| |
| /* tv tuner system standard selection for Philips FQ1216ME |
| this value takes the low bits of control byte 2 |
| from datasheet "1999 Nov 16" (supersedes "1999 Mar 23") |
| standard BG DK I L L` |
| picture carrier 38.90 38.90 38.90 38.90 33.95 |
| colour 34.47 34.47 34.47 34.47 38.38 |
| sound 1 33.40 32.40 32.90 32.40 40.45 |
| sound 2 33.16 - - - - |
| NICAM 33.05 33.05 32.35 33.05 39.80 |
| */ |
| #define PHILIPS_SET_PAL_I 0x01 /* Bit 2 always zero !*/ |
| #define PHILIPS_SET_PAL_BGDK 0x09 |
| #define PHILIPS_SET_PAL_L2 0x0a |
| #define PHILIPS_SET_PAL_L 0x0b |
| |
| /* system switching for Philips FI1216MF MK2 |
| from datasheet "1996 Jul 09", |
| standard BG L L' |
| picture carrier 38.90 38.90 33.95 |
| colour 34.47 34.37 38.38 |
| sound 1 33.40 32.40 40.45 |
| sound 2 33.16 - - |
| NICAM 33.05 33.05 39.80 |
| */ |
| #define PHILIPS_MF_SET_STD_BG 0x01 /* Bit 2 must be zero, Bit 3 is system output */ |
| #define PHILIPS_MF_SET_STD_L 0x03 /* Used on Secam France */ |
| #define PHILIPS_MF_SET_STD_LC 0x02 /* Used on SECAM L' */ |
| |
| /* Control byte */ |
| |
| #define TUNER_RATIO_MASK 0x06 /* Bit cb1:cb2 */ |
| #define TUNER_RATIO_SELECT_50 0x00 |
| #define TUNER_RATIO_SELECT_32 0x02 |
| #define TUNER_RATIO_SELECT_166 0x04 |
| #define TUNER_RATIO_SELECT_62 0x06 |
| |
| #define TUNER_CHARGE_PUMP 0x40 /* Bit cb6 */ |
| |
| /* Status byte */ |
| |
| #define TUNER_POR 0x80 |
| #define TUNER_FL 0x40 |
| #define TUNER_MODE 0x38 |
| #define TUNER_AFC 0x07 |
| #define TUNER_SIGNAL 0x07 |
| #define TUNER_STEREO 0x10 |
| |
| #define TUNER_PLL_LOCKED 0x40 |
| #define TUNER_STEREO_MK3 0x04 |
| |
| static DEFINE_MUTEX(tuner_simple_list_mutex); |
| static LIST_HEAD(hybrid_tuner_instance_list); |
| |
| struct tuner_simple_priv { |
| unsigned int nr; |
| u16 last_div; |
| |
| struct tuner_i2c_props i2c_props; |
| struct list_head hybrid_tuner_instance_list; |
| |
| unsigned int type; |
| struct tunertype *tun; |
| |
| u32 frequency; |
| u32 bandwidth; |
| }; |
| |
| /* ---------------------------------------------------------------------- */ |
| |
| static int tuner_read_status(struct dvb_frontend *fe) |
| { |
| struct tuner_simple_priv *priv = fe->tuner_priv; |
| unsigned char byte; |
| |
| if (1 != tuner_i2c_xfer_recv(&priv->i2c_props, &byte, 1)) |
| return 0; |
| |
| return byte; |
| } |
| |
| static inline int tuner_signal(const int status) |
| { |
| return (status & TUNER_SIGNAL) << 13; |
| } |
| |
| static inline int tuner_stereo(const int type, const int status) |
| { |
| switch (type) { |
| case TUNER_PHILIPS_FM1216ME_MK3: |
| case TUNER_PHILIPS_FM1236_MK3: |
| case TUNER_PHILIPS_FM1256_IH3: |
| case TUNER_LG_NTSC_TAPE: |
| return ((status & TUNER_SIGNAL) == TUNER_STEREO_MK3); |
| default: |
| return status & TUNER_STEREO; |
| } |
| } |
| |
| static inline int tuner_islocked(const int status) |
| { |
| return (status & TUNER_FL); |
| } |
| |
| static inline int tuner_afcstatus(const int status) |
| { |
| return (status & TUNER_AFC) - 2; |
| } |
| |
| |
| static int simple_get_status(struct dvb_frontend *fe, u32 *status) |
| { |
| struct tuner_simple_priv *priv = fe->tuner_priv; |
| int tuner_status; |
| |
| if (priv->i2c_props.adap == NULL) |
| return -EINVAL; |
| |
| tuner_status = tuner_read_status(fe); |
| |
| *status = 0; |
| |
| if (tuner_islocked(tuner_status)) |
| *status = TUNER_STATUS_LOCKED; |
| if (tuner_stereo(priv->type, tuner_status)) |
| *status |= TUNER_STATUS_STEREO; |
| |
| tuner_dbg("AFC Status: %d\n", tuner_afcstatus(tuner_status)); |
| |
| return 0; |
| } |
| |
| static int simple_get_rf_strength(struct dvb_frontend *fe, u16 *strength) |
| { |
| struct tuner_simple_priv *priv = fe->tuner_priv; |
| int signal; |
| |
| if (priv->i2c_props.adap == NULL) |
| return -EINVAL; |
| |
| signal = tuner_signal(tuner_read_status(fe)); |
| |
| *strength = signal; |
| |
| tuner_dbg("Signal strength: %d\n", signal); |
| |
| return 0; |
| } |
| |
| /* ---------------------------------------------------------------------- */ |
| |
| static inline char *tuner_param_name(enum param_type type) |
| { |
| char *name; |
| |
| switch (type) { |
| case TUNER_PARAM_TYPE_RADIO: |
| name = "radio"; |
| break; |
| case TUNER_PARAM_TYPE_PAL: |
| name = "pal"; |
| break; |
| case TUNER_PARAM_TYPE_SECAM: |
| name = "secam"; |
| break; |
| case TUNER_PARAM_TYPE_NTSC: |
| name = "ntsc"; |
| break; |
| case TUNER_PARAM_TYPE_DIGITAL: |
| name = "digital"; |
| break; |
| default: |
| name = "unknown"; |
| break; |
| } |
| return name; |
| } |
| |
| static struct tuner_params *simple_tuner_params(struct dvb_frontend *fe, |
| enum param_type desired_type) |
| { |
| struct tuner_simple_priv *priv = fe->tuner_priv; |
| struct tunertype *tun = priv->tun; |
| int i; |
| |
| for (i = 0; i < tun->count; i++) |
| if (desired_type == tun->params[i].type) |
| break; |
| |
| /* use default tuner params if desired_type not available */ |
| if (i == tun->count) { |
| tuner_dbg("desired params (%s) undefined for tuner %d\n", |
| tuner_param_name(desired_type), priv->type); |
| i = 0; |
| } |
| |
| tuner_dbg("using tuner params #%d (%s)\n", i, |
| tuner_param_name(tun->params[i].type)); |
| |
| return &tun->params[i]; |
| } |
| |
| static int simple_config_lookup(struct dvb_frontend *fe, |
| struct tuner_params *t_params, |
| int *frequency, u8 *config, u8 *cb) |
| { |
| struct tuner_simple_priv *priv = fe->tuner_priv; |
| int i; |
| |
| for (i = 0; i < t_params->count; i++) { |
| if (*frequency > t_params->ranges[i].limit) |
| continue; |
| break; |
| } |
| if (i == t_params->count) { |
| tuner_dbg("frequency out of range (%d > %d)\n", |
| *frequency, t_params->ranges[i - 1].limit); |
| *frequency = t_params->ranges[--i].limit; |
| } |
| *config = t_params->ranges[i].config; |
| *cb = t_params->ranges[i].cb; |
| |
| tuner_dbg("freq = %d.%02d (%d), range = %d, " |
| "config = 0x%02x, cb = 0x%02x\n", |
| *frequency / 16, *frequency % 16 * 100 / 16, *frequency, |
| i, *config, *cb); |
| |
| return i; |
| } |
| |
| /* ---------------------------------------------------------------------- */ |
| |
| static void simple_set_rf_input(struct dvb_frontend *fe, |
| u8 *config, u8 *cb, unsigned int rf) |
| { |
| struct tuner_simple_priv *priv = fe->tuner_priv; |
| |
| switch (priv->type) { |
| case TUNER_PHILIPS_TUV1236D: |
| switch (rf) { |
| case 1: |
| *cb |= 0x08; |
| break; |
| default: |
| *cb &= ~0x08; |
| break; |
| } |
| break; |
| case TUNER_PHILIPS_FCV1236D: |
| switch (rf) { |
| case 1: |
| *cb |= 0x01; |
| break; |
| default: |
| *cb &= ~0x01; |
| break; |
| } |
| break; |
| default: |
| break; |
| } |
| } |
| |
| static int simple_std_setup(struct dvb_frontend *fe, |
| struct analog_parameters *params, |
| u8 *config, u8 *cb) |
| { |
| struct tuner_simple_priv *priv = fe->tuner_priv; |
| u8 tuneraddr; |
| int rc; |
| |
| /* tv norm specific stuff for multi-norm tuners */ |
| switch (priv->type) { |
| case TUNER_PHILIPS_SECAM: /* FI1216MF */ |
| /* 0x01 -> ??? no change ??? */ |
| /* 0x02 -> PAL BDGHI / SECAM L */ |
| /* 0x04 -> ??? PAL others / SECAM others ??? */ |
| *cb &= ~0x03; |
| if (params->std & V4L2_STD_SECAM_L) |
| /* also valid for V4L2_STD_SECAM */ |
| *cb |= PHILIPS_MF_SET_STD_L; |
| else if (params->std & V4L2_STD_SECAM_LC) |
| *cb |= PHILIPS_MF_SET_STD_LC; |
| else /* V4L2_STD_B|V4L2_STD_GH */ |
| *cb |= PHILIPS_MF_SET_STD_BG; |
| break; |
| |
| case TUNER_TEMIC_4046FM5: |
| *cb &= ~0x0f; |
| |
| if (params->std & V4L2_STD_PAL_BG) { |
| *cb |= TEMIC_SET_PAL_BG; |
| |
| } else if (params->std & V4L2_STD_PAL_I) { |
| *cb |= TEMIC_SET_PAL_I; |
| |
| } else if (params->std & V4L2_STD_PAL_DK) { |
| *cb |= TEMIC_SET_PAL_DK; |
| |
| } else if (params->std & V4L2_STD_SECAM_L) { |
| *cb |= TEMIC_SET_PAL_L; |
| |
| } |
| break; |
| |
| case TUNER_PHILIPS_FQ1216ME: |
| *cb &= ~0x0f; |
| |
| if (params->std & (V4L2_STD_PAL_BG|V4L2_STD_PAL_DK)) { |
| *cb |= PHILIPS_SET_PAL_BGDK; |
| |
| } else if (params->std & V4L2_STD_PAL_I) { |
| *cb |= PHILIPS_SET_PAL_I; |
| |
| } else if (params->std & V4L2_STD_SECAM_L) { |
| *cb |= PHILIPS_SET_PAL_L; |
| |
| } |
| break; |
| |
| case TUNER_PHILIPS_FCV1236D: |
| /* 0x00 -> ATSC antenna input 1 */ |
| /* 0x01 -> ATSC antenna input 2 */ |
| /* 0x02 -> NTSC antenna input 1 */ |
| /* 0x03 -> NTSC antenna input 2 */ |
| *cb &= ~0x03; |
| if (!(params->std & V4L2_STD_ATSC)) |
| *cb |= 2; |
| break; |
| |
| case TUNER_MICROTUNE_4042FI5: |
| /* Set the charge pump for fast tuning */ |
| *config |= TUNER_CHARGE_PUMP; |
| break; |
| |
| case TUNER_PHILIPS_TUV1236D: |
| { |
| /* 0x40 -> ATSC antenna input 1 */ |
| /* 0x48 -> ATSC antenna input 2 */ |
| /* 0x00 -> NTSC antenna input 1 */ |
| /* 0x08 -> NTSC antenna input 2 */ |
| u8 buffer[4] = { 0x14, 0x00, 0x17, 0x00}; |
| *cb &= ~0x40; |
| if (params->std & V4L2_STD_ATSC) { |
| *cb |= 0x40; |
| buffer[1] = 0x04; |
| } |
| /* set to the correct mode (analog or digital) */ |
| tuneraddr = priv->i2c_props.addr; |
| priv->i2c_props.addr = 0x0a; |
| rc = tuner_i2c_xfer_send(&priv->i2c_props, &buffer[0], 2); |
| if (2 != rc) |
| tuner_warn("i2c i/o error: rc == %d " |
| "(should be 2)\n", rc); |
| rc = tuner_i2c_xfer_send(&priv->i2c_props, &buffer[2], 2); |
| if (2 != rc) |
| tuner_warn("i2c i/o error: rc == %d " |
| "(should be 2)\n", rc); |
| priv->i2c_props.addr = tuneraddr; |
| break; |
| } |
| } |
| if (atv_input[priv->nr]) |
| simple_set_rf_input(fe, config, cb, atv_input[priv->nr]); |
| |
| return 0; |
| } |
| |
| static int simple_post_tune(struct dvb_frontend *fe, u8 *buffer, |
| u16 div, u8 config, u8 cb) |
| { |
| struct tuner_simple_priv *priv = fe->tuner_priv; |
| int rc; |
| |
| switch (priv->type) { |
| case TUNER_LG_TDVS_H06XF: |
| /* Set the Auxiliary Byte. */ |
| buffer[0] = buffer[2]; |
| buffer[0] &= ~0x20; |
| buffer[0] |= 0x18; |
| buffer[1] = 0x20; |
| tuner_dbg("tv 0x%02x 0x%02x\n", buffer[0], buffer[1]); |
| |
| rc = tuner_i2c_xfer_send(&priv->i2c_props, buffer, 2); |
| if (2 != rc) |
| tuner_warn("i2c i/o error: rc == %d " |
| "(should be 2)\n", rc); |
| break; |
| case TUNER_MICROTUNE_4042FI5: |
| { |
| /* FIXME - this may also work for other tuners */ |
| unsigned long timeout = jiffies + msecs_to_jiffies(1); |
| u8 status_byte = 0; |
| |
| /* Wait until the PLL locks */ |
| for (;;) { |
| if (time_after(jiffies, timeout)) |
| return 0; |
| rc = tuner_i2c_xfer_recv(&priv->i2c_props, |
| &status_byte, 1); |
| if (1 != rc) { |
| tuner_warn("i2c i/o read error: rc == %d " |
| "(should be 1)\n", rc); |
| break; |
| } |
| if (status_byte & TUNER_PLL_LOCKED) |
| break; |
| udelay(10); |
| } |
| |
| /* Set the charge pump for optimized phase noise figure */ |
| config &= ~TUNER_CHARGE_PUMP; |
| buffer[0] = (div>>8) & 0x7f; |
| buffer[1] = div & 0xff; |
| buffer[2] = config; |
| buffer[3] = cb; |
| tuner_dbg("tv 0x%02x 0x%02x 0x%02x 0x%02x\n", |
| buffer[0], buffer[1], buffer[2], buffer[3]); |
| |
| rc = tuner_i2c_xfer_send(&priv->i2c_props, buffer, 4); |
| if (4 != rc) |
| tuner_warn("i2c i/o error: rc == %d " |
| "(should be 4)\n", rc); |
| break; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int simple_radio_bandswitch(struct dvb_frontend *fe, u8 *buffer) |
| { |
| struct tuner_simple_priv *priv = fe->tuner_priv; |
| |
| switch (priv->type) { |
| case TUNER_TENA_9533_DI: |
| case TUNER_YMEC_TVF_5533MF: |
| tuner_dbg("This tuner doesn't have FM. " |
| "Most cards have a TEA5767 for FM\n"); |
| return 0; |
| case TUNER_PHILIPS_FM1216ME_MK3: |
| case TUNER_PHILIPS_FM1236_MK3: |
| case TUNER_PHILIPS_FMD1216ME_MK3: |
| case TUNER_LG_NTSC_TAPE: |
| case TUNER_PHILIPS_FM1256_IH3: |
| buffer[3] = 0x19; |
| break; |
| case TUNER_TNF_5335MF: |
| buffer[3] = 0x11; |
| break; |
| case TUNER_LG_PAL_FM: |
| buffer[3] = 0xa5; |
| break; |
| case TUNER_THOMSON_DTT761X: |
| buffer[3] = 0x39; |
| break; |
| case TUNER_MICROTUNE_4049FM5: |
| default: |
| buffer[3] = 0xa4; |
| break; |
| } |
| |
| return 0; |
| } |
| |
| /* ---------------------------------------------------------------------- */ |
| |
| static int simple_set_tv_freq(struct dvb_frontend *fe, |
| struct analog_parameters *params) |
| { |
| struct tuner_simple_priv *priv = fe->tuner_priv; |
| u8 config, cb; |
| u16 div; |
| struct tunertype *tun; |
| u8 buffer[4]; |
| int rc, IFPCoff, i; |
| enum param_type desired_type; |
| struct tuner_params *t_params; |
| |
| tun = priv->tun; |
| |
| /* IFPCoff = Video Intermediate Frequency - Vif: |
| 940 =16*58.75 NTSC/J (Japan) |
| 732 =16*45.75 M/N STD |
| 704 =16*44 ATSC (at DVB code) |
| 632 =16*39.50 I U.K. |
| 622.4=16*38.90 B/G D/K I, L STD |
| 592 =16*37.00 D China |
| 590 =16.36.875 B Australia |
| 543.2=16*33.95 L' STD |
| 171.2=16*10.70 FM Radio (at set_radio_freq) |
| */ |
| |
| if (params->std == V4L2_STD_NTSC_M_JP) { |
| IFPCoff = 940; |
| desired_type = TUNER_PARAM_TYPE_NTSC; |
| } else if ((params->std & V4L2_STD_MN) && |
| !(params->std & ~V4L2_STD_MN)) { |
| IFPCoff = 732; |
| desired_type = TUNER_PARAM_TYPE_NTSC; |
| } else if (params->std == V4L2_STD_SECAM_LC) { |
| IFPCoff = 543; |
| desired_type = TUNER_PARAM_TYPE_SECAM; |
| } else { |
| IFPCoff = 623; |
| desired_type = TUNER_PARAM_TYPE_PAL; |
| } |
| |
| t_params = simple_tuner_params(fe, desired_type); |
| |
| i = simple_config_lookup(fe, t_params, ¶ms->frequency, |
| &config, &cb); |
| |
| div = params->frequency + IFPCoff + offset; |
| |
| tuner_dbg("Freq= %d.%02d MHz, V_IF=%d.%02d MHz, " |
| "Offset=%d.%02d MHz, div=%0d\n", |
| params->frequency / 16, params->frequency % 16 * 100 / 16, |
| IFPCoff / 16, IFPCoff % 16 * 100 / 16, |
| offset / 16, offset % 16 * 100 / 16, div); |
| |
| /* tv norm specific stuff for multi-norm tuners */ |
| simple_std_setup(fe, params, &config, &cb); |
| |
| if (t_params->cb_first_if_lower_freq && div < priv->last_div) { |
| buffer[0] = config; |
| buffer[1] = cb; |
| buffer[2] = (div>>8) & 0x7f; |
| buffer[3] = div & 0xff; |
| } else { |
| buffer[0] = (div>>8) & 0x7f; |
| buffer[1] = div & 0xff; |
| buffer[2] = config; |
| buffer[3] = cb; |
| } |
| priv->last_div = div; |
| if (t_params->has_tda9887) { |
| struct v4l2_priv_tun_config tda9887_cfg; |
| int config = 0; |
| int is_secam_l = (params->std & (V4L2_STD_SECAM_L | |
| V4L2_STD_SECAM_LC)) && |
| !(params->std & ~(V4L2_STD_SECAM_L | |
| V4L2_STD_SECAM_LC)); |
| |
| tda9887_cfg.tuner = TUNER_TDA9887; |
| tda9887_cfg.priv = &config; |
| |
| if (params->std == V4L2_STD_SECAM_LC) { |
| if (t_params->port1_active ^ t_params->port1_invert_for_secam_lc) |
| config |= TDA9887_PORT1_ACTIVE; |
| if (t_params->port2_active ^ t_params->port2_invert_for_secam_lc) |
| config |= TDA9887_PORT2_ACTIVE; |
| } else { |
| if (t_params->port1_active) |
| config |= TDA9887_PORT1_ACTIVE; |
| if (t_params->port2_active) |
| config |= TDA9887_PORT2_ACTIVE; |
| } |
| if (t_params->intercarrier_mode) |
| config |= TDA9887_INTERCARRIER; |
| if (is_secam_l) { |
| if (i == 0 && t_params->default_top_secam_low) |
| config |= TDA9887_TOP(t_params->default_top_secam_low); |
| else if (i == 1 && t_params->default_top_secam_mid) |
| config |= TDA9887_TOP(t_params->default_top_secam_mid); |
| else if (t_params->default_top_secam_high) |
| config |= TDA9887_TOP(t_params->default_top_secam_high); |
| } else { |
| if (i == 0 && t_params->default_top_low) |
| config |= TDA9887_TOP(t_params->default_top_low); |
| else if (i == 1 && t_params->default_top_mid) |
| config |= TDA9887_TOP(t_params->default_top_mid); |
| else if (t_params->default_top_high) |
| config |= TDA9887_TOP(t_params->default_top_high); |
| } |
| if (t_params->default_pll_gating_18) |
| config |= TDA9887_GATING_18; |
| i2c_clients_command(priv->i2c_props.adap, TUNER_SET_CONFIG, |
| &tda9887_cfg); |
| } |
| tuner_dbg("tv 0x%02x 0x%02x 0x%02x 0x%02x\n", |
| buffer[0], buffer[1], buffer[2], buffer[3]); |
| |
| rc = tuner_i2c_xfer_send(&priv->i2c_props, buffer, 4); |
| if (4 != rc) |
| tuner_warn("i2c i/o error: rc == %d (should be 4)\n", rc); |
| |
| simple_post_tune(fe, &buffer[0], div, config, cb); |
| |
| return 0; |
| } |
| |
| static int simple_set_radio_freq(struct dvb_frontend *fe, |
| struct analog_parameters *params) |
| { |
| struct tunertype *tun; |
| struct tuner_simple_priv *priv = fe->tuner_priv; |
| u8 buffer[4]; |
| u16 div; |
| int rc, j; |
| struct tuner_params *t_params; |
| unsigned int freq = params->frequency; |
| |
| tun = priv->tun; |
| |
| for (j = tun->count-1; j > 0; j--) |
| if (tun->params[j].type == TUNER_PARAM_TYPE_RADIO) |
| break; |
| /* default t_params (j=0) will be used if desired type wasn't found */ |
| t_params = &tun->params[j]; |
| |
| /* Select Radio 1st IF used */ |
| switch (t_params->radio_if) { |
| case 0: /* 10.7 MHz */ |
| freq += (unsigned int)(10.7*16000); |
| break; |
| case 1: /* 33.3 MHz */ |
| freq += (unsigned int)(33.3*16000); |
| break; |
| case 2: /* 41.3 MHz */ |
| freq += (unsigned int)(41.3*16000); |
| break; |
| default: |
| tuner_warn("Unsupported radio_if value %d\n", |
| t_params->radio_if); |
| return 0; |
| } |
| |
| /* Bandswitch byte */ |
| simple_radio_bandswitch(fe, &buffer[0]); |
| |
| buffer[2] = (t_params->ranges[0].config & ~TUNER_RATIO_MASK) | |
| TUNER_RATIO_SELECT_50; /* 50 kHz step */ |
| |
| /* Convert from 1/16 kHz V4L steps to 1/20 MHz (=50 kHz) PLL steps |
| freq * (1 Mhz / 16000 V4L steps) * (20 PLL steps / 1 MHz) = |
| freq * (1/800) */ |
| div = (freq + 400) / 800; |
| |
| if (t_params->cb_first_if_lower_freq && div < priv->last_div) { |
| buffer[0] = buffer[2]; |
| buffer[1] = buffer[3]; |
| buffer[2] = (div>>8) & 0x7f; |
| buffer[3] = div & 0xff; |
| } else { |
| buffer[0] = (div>>8) & 0x7f; |
| buffer[1] = div & 0xff; |
| } |
| |
| tuner_dbg("radio 0x%02x 0x%02x 0x%02x 0x%02x\n", |
| buffer[0], buffer[1], buffer[2], buffer[3]); |
| priv->last_div = div; |
| |
| if (t_params->has_tda9887) { |
| int config = 0; |
| struct v4l2_priv_tun_config tda9887_cfg; |
| |
| tda9887_cfg.tuner = TUNER_TDA9887; |
| tda9887_cfg.priv = &config; |
| |
| if (t_params->port1_active && |
| !t_params->port1_fm_high_sensitivity) |
| config |= TDA9887_PORT1_ACTIVE; |
| if (t_params->port2_active && |
| !t_params->port2_fm_high_sensitivity) |
| config |= TDA9887_PORT2_ACTIVE; |
| if (t_params->intercarrier_mode) |
| config |= TDA9887_INTERCARRIER; |
| /* if (t_params->port1_set_for_fm_mono) |
| config &= ~TDA9887_PORT1_ACTIVE;*/ |
| if (t_params->fm_gain_normal) |
| config |= TDA9887_GAIN_NORMAL; |
| if (t_params->radio_if == 2) |
| config |= TDA9887_RIF_41_3; |
| i2c_clients_command(priv->i2c_props.adap, TUNER_SET_CONFIG, |
| &tda9887_cfg); |
| } |
| rc = tuner_i2c_xfer_send(&priv->i2c_props, buffer, 4); |
| if (4 != rc) |
| tuner_warn("i2c i/o error: rc == %d (should be 4)\n", rc); |
| |
| return 0; |
| } |
| |
| static int simple_set_params(struct dvb_frontend *fe, |
| struct analog_parameters *params) |
| { |
| struct tuner_simple_priv *priv = fe->tuner_priv; |
| int ret = -EINVAL; |
| |
| if (priv->i2c_props.adap == NULL) |
| return -EINVAL; |
| |
| switch (params->mode) { |
| case V4L2_TUNER_RADIO: |
| ret = simple_set_radio_freq(fe, params); |
| priv->frequency = params->frequency * 125 / 2; |
| break; |
| case V4L2_TUNER_ANALOG_TV: |
| case V4L2_TUNER_DIGITAL_TV: |
| ret = simple_set_tv_freq(fe, params); |
| priv->frequency = params->frequency * 62500; |
| break; |
| } |
| priv->bandwidth = 0; |
| |
| return ret; |
| } |
| |
| static void simple_set_dvb(struct dvb_frontend *fe, u8 *buf, |
| const struct dvb_frontend_parameters *params) |
| { |
| struct tuner_simple_priv *priv = fe->tuner_priv; |
| |
| switch (priv->type) { |
| case TUNER_PHILIPS_FMD1216ME_MK3: |
| if (params->u.ofdm.bandwidth == BANDWIDTH_8_MHZ && |
| params->frequency >= 158870000) |
| buf[3] |= 0x08; |
| break; |
| case TUNER_PHILIPS_TD1316: |
| /* determine band */ |
| buf[3] |= (params->frequency < 161000000) ? 1 : |
| (params->frequency < 444000000) ? 2 : 4; |
| |
| /* setup PLL filter */ |
| if (params->u.ofdm.bandwidth == BANDWIDTH_8_MHZ) |
| buf[3] |= 1 << 3; |
| break; |
| case TUNER_PHILIPS_TUV1236D: |
| case TUNER_PHILIPS_FCV1236D: |
| { |
| unsigned int new_rf; |
| |
| if (dtv_input[priv->nr]) |
| new_rf = dtv_input[priv->nr]; |
| else |
| switch (params->u.vsb.modulation) { |
| case QAM_64: |
| case QAM_256: |
| new_rf = 1; |
| break; |
| case VSB_8: |
| default: |
| new_rf = 0; |
| break; |
| } |
| simple_set_rf_input(fe, &buf[2], &buf[3], new_rf); |
| break; |
| } |
| default: |
| break; |
| } |
| } |
| |
| static u32 simple_dvb_configure(struct dvb_frontend *fe, u8 *buf, |
| const struct dvb_frontend_parameters *params) |
| { |
| /* This function returns the tuned frequency on success, 0 on error */ |
| struct tuner_simple_priv *priv = fe->tuner_priv; |
| struct tunertype *tun = priv->tun; |
| static struct tuner_params *t_params; |
| u8 config, cb; |
| u32 div; |
| int ret, frequency = params->frequency / 62500; |
| |
| t_params = simple_tuner_params(fe, TUNER_PARAM_TYPE_DIGITAL); |
| ret = simple_config_lookup(fe, t_params, &frequency, &config, &cb); |
| if (ret < 0) |
| return 0; /* failure */ |
| |
| div = ((frequency + t_params->iffreq) * 62500 + offset + |
| tun->stepsize/2) / tun->stepsize; |
| |
| buf[0] = div >> 8; |
| buf[1] = div & 0xff; |
| buf[2] = config; |
| buf[3] = cb; |
| |
| simple_set_dvb(fe, buf, params); |
| |
| tuner_dbg("%s: div=%d | buf=0x%02x,0x%02x,0x%02x,0x%02x\n", |
| tun->name, div, buf[0], buf[1], buf[2], buf[3]); |
| |
| /* calculate the frequency we set it to */ |
| return (div * tun->stepsize) - t_params->iffreq; |
| } |
| |
| static int simple_dvb_calc_regs(struct dvb_frontend *fe, |
| struct dvb_frontend_parameters *params, |
| u8 *buf, int buf_len) |
| { |
| struct tuner_simple_priv *priv = fe->tuner_priv; |
| u32 frequency; |
| |
| if (buf_len < 5) |
| return -EINVAL; |
| |
| frequency = simple_dvb_configure(fe, buf+1, params); |
| if (frequency == 0) |
| return -EINVAL; |
| |
| buf[0] = priv->i2c_props.addr; |
| |
| priv->frequency = frequency; |
| priv->bandwidth = (fe->ops.info.type == FE_OFDM) ? |
| params->u.ofdm.bandwidth : 0; |
| |
| return 5; |
| } |
| |
| static int simple_dvb_set_params(struct dvb_frontend *fe, |
| struct dvb_frontend_parameters *params) |
| { |
| struct tuner_simple_priv *priv = fe->tuner_priv; |
| u32 prev_freq, prev_bw; |
| int ret; |
| u8 buf[5]; |
| |
| if (priv->i2c_props.adap == NULL) |
| return -EINVAL; |
| |
| prev_freq = priv->frequency; |
| prev_bw = priv->bandwidth; |
| |
| ret = simple_dvb_calc_regs(fe, params, buf, 5); |
| if (ret != 5) |
| goto fail; |
| |
| /* put analog demod in standby when tuning digital */ |
| if (fe->ops.analog_ops.standby) |
| fe->ops.analog_ops.standby(fe); |
| |
| if (fe->ops.i2c_gate_ctrl) |
| fe->ops.i2c_gate_ctrl(fe, 1); |
| |
| /* buf[0] contains the i2c address, but * |
| * we already have it in i2c_props.addr */ |
| ret = tuner_i2c_xfer_send(&priv->i2c_props, buf+1, 4); |
| if (ret != 4) |
| goto fail; |
| |
| return 0; |
| fail: |
| /* calc_regs sets frequency and bandwidth. if we failed, unset them */ |
| priv->frequency = prev_freq; |
| priv->bandwidth = prev_bw; |
| |
| return ret; |
| } |
| |
| static int simple_init(struct dvb_frontend *fe) |
| { |
| struct tuner_simple_priv *priv = fe->tuner_priv; |
| |
| if (priv->i2c_props.adap == NULL) |
| return -EINVAL; |
| |
| if (priv->tun->initdata) { |
| int ret; |
| |
| if (fe->ops.i2c_gate_ctrl) |
| fe->ops.i2c_gate_ctrl(fe, 1); |
| |
| ret = tuner_i2c_xfer_send(&priv->i2c_props, |
| priv->tun->initdata + 1, |
| priv->tun->initdata[0]); |
| if (ret != priv->tun->initdata[0]) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int simple_sleep(struct dvb_frontend *fe) |
| { |
| struct tuner_simple_priv *priv = fe->tuner_priv; |
| |
| if (priv->i2c_props.adap == NULL) |
| return -EINVAL; |
| |
| if (priv->tun->sleepdata) { |
| int ret; |
| |
| if (fe->ops.i2c_gate_ctrl) |
| fe->ops.i2c_gate_ctrl(fe, 1); |
| |
| ret = tuner_i2c_xfer_send(&priv->i2c_props, |
| priv->tun->sleepdata + 1, |
| priv->tun->sleepdata[0]); |
| if (ret != priv->tun->sleepdata[0]) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int simple_release(struct dvb_frontend *fe) |
| { |
| struct tuner_simple_priv *priv = fe->tuner_priv; |
| |
| mutex_lock(&tuner_simple_list_mutex); |
| |
| if (priv) |
| hybrid_tuner_release_state(priv); |
| |
| mutex_unlock(&tuner_simple_list_mutex); |
| |
| fe->tuner_priv = NULL; |
| |
| return 0; |
| } |
| |
| static int simple_get_frequency(struct dvb_frontend *fe, u32 *frequency) |
| { |
| struct tuner_simple_priv *priv = fe->tuner_priv; |
| *frequency = priv->frequency; |
| return 0; |
| } |
| |
| static int simple_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth) |
| { |
| struct tuner_simple_priv *priv = fe->tuner_priv; |
| *bandwidth = priv->bandwidth; |
| return 0; |
| } |
| |
| static struct dvb_tuner_ops simple_tuner_ops = { |
| .init = simple_init, |
| .sleep = simple_sleep, |
| .set_analog_params = simple_set_params, |
| .set_params = simple_dvb_set_params, |
| .calc_regs = simple_dvb_calc_regs, |
| .release = simple_release, |
| .get_frequency = simple_get_frequency, |
| .get_bandwidth = simple_get_bandwidth, |
| .get_status = simple_get_status, |
| .get_rf_strength = simple_get_rf_strength, |
| }; |
| |
| struct dvb_frontend *simple_tuner_attach(struct dvb_frontend *fe, |
| struct i2c_adapter *i2c_adap, |
| u8 i2c_addr, |
| unsigned int type) |
| { |
| struct tuner_simple_priv *priv = NULL; |
| int instance; |
| |
| if (type >= tuner_count) { |
| printk(KERN_WARNING "%s: invalid tuner type: %d (max: %d)\n", |
| __func__, type, tuner_count-1); |
| return NULL; |
| } |
| |
| /* If i2c_adap is set, check that the tuner is at the correct address. |
| * Otherwise, if i2c_adap is NULL, the tuner will be programmed directly |
| * by the digital demod via calc_regs. |
| */ |
| if (i2c_adap != NULL) { |
| u8 b[1]; |
| struct i2c_msg msg = { |
| .addr = i2c_addr, .flags = I2C_M_RD, |
| .buf = b, .len = 1, |
| }; |
| |
| if (fe->ops.i2c_gate_ctrl) |
| fe->ops.i2c_gate_ctrl(fe, 1); |
| |
| if (1 != i2c_transfer(i2c_adap, &msg, 1)) |
| printk(KERN_WARNING "tuner-simple %d-%04x: " |
| "unable to probe %s, proceeding anyway.", |
| i2c_adapter_id(i2c_adap), i2c_addr, |
| tuners[type].name); |
| |
| if (fe->ops.i2c_gate_ctrl) |
| fe->ops.i2c_gate_ctrl(fe, 0); |
| } |
| |
| mutex_lock(&tuner_simple_list_mutex); |
| |
| instance = hybrid_tuner_request_state(struct tuner_simple_priv, priv, |
| hybrid_tuner_instance_list, |
| i2c_adap, i2c_addr, |
| "tuner-simple"); |
| switch (instance) { |
| case 0: |
| mutex_unlock(&tuner_simple_list_mutex); |
| return NULL; |
| break; |
| case 1: |
| fe->tuner_priv = priv; |
| |
| priv->type = type; |
| priv->tun = &tuners[type]; |
| priv->nr = simple_devcount++; |
| break; |
| default: |
| fe->tuner_priv = priv; |
| break; |
| } |
| |
| mutex_unlock(&tuner_simple_list_mutex); |
| |
| memcpy(&fe->ops.tuner_ops, &simple_tuner_ops, |
| sizeof(struct dvb_tuner_ops)); |
| |
| tuner_info("type set to %d (%s)\n", type, priv->tun->name); |
| |
| if ((debug) || ((atv_input[priv->nr] > 0) || |
| (dtv_input[priv->nr] > 0))) { |
| if (0 == atv_input[priv->nr]) |
| tuner_info("tuner %d atv rf input will be " |
| "autoselected\n", priv->nr); |
| else |
| tuner_info("tuner %d atv rf input will be " |
| "set to input %d (insmod option)\n", |
| priv->nr, atv_input[priv->nr]); |
| if (0 == dtv_input[priv->nr]) |
| tuner_info("tuner %d dtv rf input will be " |
| "autoselected\n", priv->nr); |
| else |
| tuner_info("tuner %d dtv rf input will be " |
| "set to input %d (insmod option)\n", |
| priv->nr, dtv_input[priv->nr]); |
| } |
| |
| strlcpy(fe->ops.tuner_ops.info.name, priv->tun->name, |
| sizeof(fe->ops.tuner_ops.info.name)); |
| |
| return fe; |
| } |
| EXPORT_SYMBOL_GPL(simple_tuner_attach); |
| |
| MODULE_DESCRIPTION("Simple 4-control-bytes style tuner driver"); |
| MODULE_AUTHOR("Ralph Metzler, Gerd Knorr, Gunther Mayer"); |
| MODULE_LICENSE("GPL"); |
| |
| /* |
| * Overrides for Emacs so that we follow Linus's tabbing style. |
| * --------------------------------------------------------------------------- |
| * Local variables: |
| * c-basic-offset: 8 |
| * End: |
| */ |