ARM: orion5x: convert RD-88F5182 to Device Tree
This commit converts the RD-88F5182 platform to the Device Tree. All
devices except the PCI are converted to the Device Tree.
It is worth noting that:
* The PCI description for the DT case is kept in board-rd88f5182.c.
* The existing non-DT support in rd88f5182-setup.c is kept as is, in
order to allow testing of a given platform in both DT and non-DT
cases. It will ultimately be removed, once we no longer care about
non-DT support for Orion5x.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Link: https://lkml.kernel.org/r/1398202002-28530-35-git-send-email-thomas.petazzoni@free-electrons.com
Cc: Ronen Shitrit <rshitrit@marvell.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 35c146f..f7943a8 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -289,7 +289,8 @@
am43x-epos-evm.dtb \
am437x-gp-evm.dtb \
dra7-evm.dtb
-dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-ethernet-disk-mini-v2.dtb
+dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-ethernet-disk-mini-v2.dtb \
+ orion5x-rd88f5182-nas.dtb
dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb
dtb-$(CONFIG_ARCH_QCOM) += qcom-msm8660-surf.dtb \
qcom-msm8960-cdp.dtb \
diff --git a/arch/arm/boot/dts/orion5x-rd88f5182-nas.dts b/arch/arm/boot/dts/orion5x-rd88f5182-nas.dts
new file mode 100644
index 0000000..6fb0525
--- /dev/null
+++ b/arch/arm/boot/dts/orion5x-rd88f5182-nas.dts
@@ -0,0 +1,177 @@
+/*
+ * Copyright (C) 2014 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include "orion5x-mv88f5182.dtsi"
+
+/ {
+ model = "Marvell Reference Design 88F5182 NAS";
+ compatible = "marvell,rd-88f5182-nas", "marvell,orion5x-88f5182", "marvell,orion5x";
+
+ memory {
+ reg = <0x00000000 0x4000000>; /* 64 MB */
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8 earlyprintk";
+ linux,stdout-path = &uart0;
+ };
+
+ soc {
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000>,
+ <MBUS_ID(0x09, 0x00) 0 0xf2200000 0x800>,
+ <MBUS_ID(0x01, 0x0f) 0 0xf4000000 0x80000>,
+ <MBUS_ID(0x01, 0x1d) 0 0xfc000000 0x1000000>;
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&pmx_debug_led>;
+ pinctrl-names = "default";
+
+ led@0 {
+ label = "rd88f5182:cpu";
+ linux,default-trigger = "heartbeat";
+ gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&devbus_bootcs {
+ status = "okay";
+
+ /* Read parameters */
+ devbus,bus-width = <8>;
+ devbus,turn-off-ps = <90000>;
+ devbus,badr-skew-ps = <0>;
+ devbus,acc-first-ps = <186000>;
+ devbus,acc-next-ps = <186000>;
+
+ /* Write parameters */
+ devbus,wr-high-ps = <90000>;
+ devbus,wr-low-ps = <90000>;
+ devbus,ale-wr-ps = <90000>;
+
+ flash@0 {
+ compatible = "cfi-flash";
+ reg = <0 0x80000>;
+ bank-width = <1>;
+ };
+};
+
+&devbus_cs1 {
+ status = "okay";
+
+ /* Read parameters */
+ devbus,bus-width = <8>;
+ devbus,turn-off-ps = <90000>;
+ devbus,badr-skew-ps = <0>;
+ devbus,acc-first-ps = <186000>;
+ devbus,acc-next-ps = <186000>;
+
+ /* Write parameters */
+ devbus,wr-high-ps = <90000>;
+ devbus,wr-low-ps = <90000>;
+ devbus,ale-wr-ps = <90000>;
+
+ flash@0 {
+ compatible = "cfi-flash";
+ reg = <0 0x1000000>;
+ bank-width = <1>;
+ };
+};
+
+&ehci0 {
+ status = "okay";
+};
+
+&ehci1 {
+ status = "okay";
+};
+
+ð {
+ status = "okay";
+
+ ethernet-port@0 {
+ phy-handle = <ðphy>;
+ };
+};
+
+&i2c {
+ status = "okay";
+ clock-frequency = <100000>;
+ #address-cells = <1>;
+
+ rtc@68 {
+ pinctrl-0 = <&pmx_rtc>;
+ pinctrl-names = "default";
+ compatible = "dallas,ds1338";
+ reg = <0x68>;
+ };
+};
+
+&mdio {
+ status = "okay";
+
+ ethphy: ethernet-phy {
+ reg = <8>;
+ };
+};
+
+&pinctrl {
+ pinctrl-0 = <&pmx_reset_switch &pmx_misc_gpios
+ &pmx_pci_gpios>;
+ pinctrl-names = "default";
+
+ /*
+ * MPP[20] PCI Clock to MV88F5182
+ * MPP[21] PCI Clock to mini PCI CON11
+ * MPP[22] USB 0 over current indication
+ * MPP[23] USB 1 over current indication
+ * MPP[24] USB 1 over current enable
+ * MPP[25] USB 0 over current enable
+ */
+
+ pmx_debug_led: pmx-debug_led {
+ marvell,pins = "mpp0";
+ marvell,function = "gpio";
+ };
+
+ pmx_reset_switch: pmx-reset-switch {
+ marvell,pins = "mpp1";
+ marvell,function = "gpio";
+ };
+
+ pmx_rtc: pmx-rtc {
+ marvell,pins = "mpp3";
+ marvell,function = "gpio";
+ };
+
+ pmx_misc_gpios: pmx-misc-gpios {
+ marvell,pins = "mpp4", "mpp5";
+ marvell,function = "gpio";
+ };
+
+ pmx_pci_gpios: pmx-pci-gpios {
+ marvell,pins = "mpp6", "mpp7";
+ marvell,function = "gpio";
+ };
+};
+
+&sata {
+ pinctrl-0 = <&pmx_sata0 &pmx_sata1>;
+ pinctrl-names = "default";
+ status = "okay";
+ nr-ports = <2>;
+};
+
+&uart0 {
+ status = "okay";
+};