drm/i915/chv: Trigger phy common lane reset
During cold boot, the display controller needs to deassert the common
lane reset. Only do it once during intel_init_dpio for both PHYx2 and
PHYx1.
Besides, assert the common lane reset when disable pll. This still
to be determined whether need to do it by driver.
Signed-off-by: Chon Ming Lee <chon.ming.lee@intel.com>
[vsyrjala: Don't disable DPIO PLL when using DSI]
[vsyrjala: Don't call vlv_disable_pll() by accident on CHV]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
[danvet: Move part of a moved comment back as suggested by Imre since
it's valid for both byt and chv.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 17e139e..921b48f 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -1423,6 +1423,14 @@
/* Additional CHV pll/phy registers */
#define DPIO_PHY_STATUS (VLV_DISPLAY_BASE + 0x6240)
#define DPLL_PORTD_READY_MASK (0xf)
+#define DISPLAY_PHY_CONTROL (VLV_DISPLAY_BASE + 0x60100)
+#define PHY_COM_LANE_RESET_DEASSERT(phy, val) \
+ ((phy == DPIO_PHY0) ? (val | 1) : (val | 2))
+#define PHY_COM_LANE_RESET_ASSERT(phy, val) \
+ ((phy == DPIO_PHY0) ? (val & ~1) : (val & ~2))
+#define DISPLAY_PHY_STATUS (VLV_DISPLAY_BASE + 0x60104)
+#define PHY_POWERGOOD(phy) ((phy == DPIO_PHY0) ? (1<<31) : (1<<30))
+
/*
* The i830 generation, in LVDS mode, defines P1 as the bit number set within
* this field (only one bit may be set).
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index c42593f..8942f39 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -1395,17 +1395,42 @@
DPLL_REFA_CLK_ENABLE_VLV |
DPLL_INTEGRATED_CRI_CLK_VLV);
- /*
- * From VLV2A0_DP_eDP_DPIO_driver_vbios_notes_10.docx -
- * 6. De-assert cmn_reset/side_reset. Same as VLV X0.
- * a. GUnit 0x2110 bit[0] set to 1 (def 0)
- * b. The other bits such as sfr settings / modesel may all be set
- * to 0.
- *
- * This should only be done on init and resume from S3 with both
- * PLLs disabled, or we risk losing DPIO and PLL synchronization.
- */
- I915_WRITE(DPIO_CTL, I915_READ(DPIO_CTL) | DPIO_CMNRST);
+ if (IS_CHERRYVIEW(dev)) {
+ enum dpio_phy phy;
+ u32 val;
+
+ for (phy = DPIO_PHY0; phy < I915_NUM_PHYS_VLV; phy++) {
+ /* Poll for phypwrgood signal */
+ if (wait_for(I915_READ(DISPLAY_PHY_STATUS) &
+ PHY_POWERGOOD(phy), 1))
+ DRM_ERROR("Display PHY %d is not power up\n", phy);
+
+ /*
+ * Deassert common lane reset for PHY.
+ *
+ * This should only be done on init and resume from S3
+ * with both PLLs disabled, or we risk losing DPIO and
+ * PLL synchronization.
+ */
+ val = I915_READ(DISPLAY_PHY_CONTROL);
+ I915_WRITE(DISPLAY_PHY_CONTROL,
+ PHY_COM_LANE_RESET_DEASSERT(phy, val));
+ }
+
+ } else {
+ /*
+ * From VLV2A0_DP_eDP_DPIO_driver_vbios_notes_10.docx -
+ * 6. De-assert cmn_reset/side_reset. Same as VLV X0.
+ * a. GUnit 0x2110 bit[0] set to 1 (def 0)
+ * b. The other bits such as sfr settings / modesel may all
+ * be set to 0.
+ *
+ * This should only be done on init and resume from S3 with
+ * both PLLs disabled, or we risk losing DPIO and PLL
+ * synchronization.
+ */
+ I915_WRITE(DPIO_CTL, I915_READ(DPIO_CTL) | DPIO_CMNRST);
+ }
}
static void vlv_enable_pll(struct intel_crtc *crtc)
@@ -1529,6 +1554,19 @@
val = DPLL_INTEGRATED_CRI_CLK_VLV | DPLL_REFA_CLK_ENABLE_VLV;
I915_WRITE(DPLL(pipe), val);
POSTING_READ(DPLL(pipe));
+
+}
+
+static void chv_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe)
+{
+ int dpll = DPLL(pipe);
+ u32 val;
+
+ /* Set PLL en = 0 */
+ val = I915_READ(dpll);
+ val &= ~DPLL_VCO_ENABLE;
+ I915_WRITE(dpll, val);
+
}
void vlv_wait_port_ready(struct drm_i915_private *dev_priv,
@@ -4446,10 +4484,14 @@
if (encoder->post_disable)
encoder->post_disable(encoder);
- if (IS_VALLEYVIEW(dev) && !intel_pipe_has_type(crtc, INTEL_OUTPUT_DSI))
- vlv_disable_pll(dev_priv, pipe);
- else if (!IS_VALLEYVIEW(dev))
- i9xx_disable_pll(dev_priv, pipe);
+ if (!intel_pipe_has_type(crtc, INTEL_OUTPUT_DSI)) {
+ if (IS_CHERRYVIEW(dev))
+ chv_disable_pll(dev_priv, pipe);
+ else if (IS_VALLEYVIEW(dev))
+ vlv_disable_pll(dev_priv, pipe);
+ else
+ i9xx_disable_pll(dev_priv, pipe);
+ }
intel_crtc->active = false;
intel_update_watermarks(crtc);