edac: move dimm properties to struct dimm_info
On systems based on chip select rows, all channels need to use memories
with the same properties, otherwise the memories on channels A and B
won't be recognized.
However, such assumption is not true for all types of memory
controllers.
Controllers for FB-DIMM's don't have such requirements.
Also, modern Intel controllers seem to be capable of handling such
differences.
So, we need to get rid of storing the DIMM information into a per-csrow
data, storing it, instead at the right place.
The first step is to move grain, mtype, dtype and edac_mode to the
per-dimm struct.
Reviewed-by: Aristeu Rozanski <arozansk@redhat.com>
Reviewed-by: Borislav Petkov <borislav.petkov@amd.com>
Acked-by: Chris Metcalf <cmetcalf@tilera.com>
Cc: Doug Thompson <norsk5@yahoo.com>
Cc: Borislav Petkov <borislav.petkov@amd.com>
Cc: Mark Gross <mark.gross@intel.com>
Cc: Jason Uhlenkott <juhlenko@akamai.com>
Cc: Tim Small <tim@buttersideup.com>
Cc: Ranganathan Desikan <ravi@jetztechnologies.com>
Cc: "Arvind R." <arvino55@gmail.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: Egor Martovetsky <egor@pasemi.com>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Joe Perches <joe@perches.com>
Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Hitoshi Mitake <h.mitake@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: James Bottomley <James.Bottomley@parallels.com>
Cc: "Niklas Söderlund" <niklas.soderlund@ericsson.com>
Cc: Shaohui Xie <Shaohui.Xie@freescale.com>
Cc: Josh Boyer <jwboyer@gmail.com>
Cc: Mike Williams <mike@mikebwilliams.com>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
index 7ef73c9..8126db0 100644
--- a/drivers/edac/amd64_edac.c
+++ b/drivers/edac/amd64_edac.c
@@ -2187,7 +2187,9 @@
struct amd64_pvt *pvt = mci->pvt_info;
u64 input_addr_min, input_addr_max, sys_addr, base, mask;
u32 val;
- int i, empty = 1;
+ int i, j, empty = 1;
+ enum mem_type mtype;
+ enum edac_type edac_mode;
amd64_read_pci_cfg(pvt->F3, NBCFG, &val);
@@ -2224,7 +2226,7 @@
csrow->page_mask = ~mask;
/* 8 bytes of resolution */
- csrow->mtype = amd64_determine_memory_type(pvt, i);
+ mtype = amd64_determine_memory_type(pvt, i);
debugf1(" for MC node %d csrow %d:\n", pvt->mc_node_id, i);
debugf1(" input_addr_min: 0x%lx input_addr_max: 0x%lx\n",
@@ -2241,11 +2243,15 @@
* determine whether CHIPKILL or JUST ECC or NO ECC is operating
*/
if (pvt->nbcfg & NBCFG_ECC_ENABLE)
- csrow->edac_mode =
- (pvt->nbcfg & NBCFG_CHIPKILL) ?
- EDAC_S4ECD4ED : EDAC_SECDED;
+ edac_mode = (pvt->nbcfg & NBCFG_CHIPKILL) ?
+ EDAC_S4ECD4ED : EDAC_SECDED;
else
- csrow->edac_mode = EDAC_NONE;
+ edac_mode = EDAC_NONE;
+
+ for (j = 0; j < pvt->channel_count; j++) {
+ csrow->channels[j].dimm->mtype = mtype;
+ csrow->channels[j].dimm->edac_mode = edac_mode;
+ }
}
return empty;