| /* |
| * This file is part of wl1271 |
| * |
| * Copyright (C) 2009-2010 Nokia Corporation |
| * |
| * Contact: Luciano Coelho <luciano.coelho@nokia.com> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU |
| * General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA |
| * 02110-1301 USA |
| * |
| */ |
| |
| #include <linux/ieee80211.h> |
| |
| #include "wl1271.h" |
| #include "wl1271_cmd.h" |
| #include "wl1271_scan.h" |
| #include "wl1271_acx.h" |
| |
| static int wl1271_get_scan_channels(struct wl1271 *wl, |
| struct cfg80211_scan_request *req, |
| struct basic_scan_channel_params *channels, |
| enum ieee80211_band band, bool passive) |
| { |
| int i, j; |
| u32 flags; |
| |
| for (i = 0, j = 0; |
| i < req->n_channels && j < WL1271_SCAN_MAX_CHANNELS; |
| i++) { |
| |
| flags = req->channels[i]->flags; |
| |
| if (!wl->scan.scanned_ch[i] && |
| !(flags & IEEE80211_CHAN_DISABLED) && |
| ((!!(flags & IEEE80211_CHAN_PASSIVE_SCAN)) == passive) && |
| (req->channels[i]->band == band)) { |
| |
| wl1271_debug(DEBUG_SCAN, "band %d, center_freq %d ", |
| req->channels[i]->band, |
| req->channels[i]->center_freq); |
| wl1271_debug(DEBUG_SCAN, "hw_value %d, flags %X", |
| req->channels[i]->hw_value, |
| req->channels[i]->flags); |
| wl1271_debug(DEBUG_SCAN, |
| "max_antenna_gain %d, max_power %d", |
| req->channels[i]->max_antenna_gain, |
| req->channels[i]->max_power); |
| wl1271_debug(DEBUG_SCAN, "beacon_found %d", |
| req->channels[i]->beacon_found); |
| |
| channels[j].min_duration = |
| cpu_to_le32(WL1271_SCAN_CHAN_MIN_DURATION); |
| channels[j].max_duration = |
| cpu_to_le32(WL1271_SCAN_CHAN_MAX_DURATION); |
| channels[j].early_termination = 0; |
| channels[j].tx_power_att = WL1271_SCAN_CURRENT_TX_PWR; |
| channels[j].channel = req->channels[i]->hw_value; |
| |
| memset(&channels[j].bssid_lsb, 0xff, 4); |
| memset(&channels[j].bssid_msb, 0xff, 2); |
| |
| /* Mark the channels we already used */ |
| wl->scan.scanned_ch[i] = true; |
| |
| j++; |
| } |
| } |
| |
| return j; |
| } |
| |
| #define WL1271_NOTHING_TO_SCAN 1 |
| |
| static int wl1271_scan_send(struct wl1271 *wl, enum ieee80211_band band, |
| bool passive, u32 basic_rate) |
| { |
| struct wl1271_cmd_scan *cmd; |
| struct wl1271_cmd_trigger_scan_to *trigger; |
| int ret; |
| u16 scan_options = 0; |
| |
| cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); |
| trigger = kzalloc(sizeof(*trigger), GFP_KERNEL); |
| if (!cmd || !trigger) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| |
| /* We always use high priority scans */ |
| scan_options = WL1271_SCAN_OPT_PRIORITY_HIGH; |
| if(passive) |
| scan_options |= WL1271_SCAN_OPT_PASSIVE; |
| cmd->params.scan_options = cpu_to_le16(scan_options); |
| |
| cmd->params.n_ch = wl1271_get_scan_channels(wl, wl->scan.req, |
| cmd->channels, |
| band, passive); |
| if (cmd->params.n_ch == 0) { |
| ret = WL1271_NOTHING_TO_SCAN; |
| goto out; |
| } |
| |
| cmd->params.tx_rate = cpu_to_le32(basic_rate); |
| cmd->params.rx_config_options = cpu_to_le32(CFG_RX_ALL_GOOD); |
| cmd->params.rx_filter_options = |
| cpu_to_le32(CFG_RX_PRSP_EN | CFG_RX_MGMT_EN | CFG_RX_BCN_EN); |
| |
| cmd->params.n_probe_reqs = WL1271_SCAN_PROBE_REQS; |
| cmd->params.tx_rate = cpu_to_le32(basic_rate); |
| cmd->params.tid_trigger = 0; |
| cmd->params.scan_tag = WL1271_SCAN_DEFAULT_TAG; |
| |
| if (band == IEEE80211_BAND_2GHZ) |
| cmd->params.band = WL1271_SCAN_BAND_2_4_GHZ; |
| else |
| cmd->params.band = WL1271_SCAN_BAND_5_GHZ; |
| |
| if (wl->scan.ssid_len && wl->scan.ssid) { |
| cmd->params.ssid_len = wl->scan.ssid_len; |
| memcpy(cmd->params.ssid, wl->scan.ssid, wl->scan.ssid_len); |
| } |
| |
| ret = wl1271_cmd_build_probe_req(wl, wl->scan.ssid, wl->scan.ssid_len, |
| wl->scan.req->ie, wl->scan.req->ie_len, |
| band); |
| if (ret < 0) { |
| wl1271_error("PROBE request template failed"); |
| goto out; |
| } |
| |
| /* disable the timeout */ |
| trigger->timeout = 0; |
| ret = wl1271_cmd_send(wl, CMD_TRIGGER_SCAN_TO, trigger, |
| sizeof(*trigger), 0); |
| if (ret < 0) { |
| wl1271_error("trigger scan to failed for hw scan"); |
| goto out; |
| } |
| |
| wl1271_dump(DEBUG_SCAN, "SCAN: ", cmd, sizeof(*cmd)); |
| |
| ret = wl1271_cmd_send(wl, CMD_SCAN, cmd, sizeof(*cmd), 0); |
| if (ret < 0) { |
| wl1271_error("SCAN failed"); |
| goto out; |
| } |
| |
| out: |
| kfree(cmd); |
| kfree(trigger); |
| return ret; |
| } |
| |
| void wl1271_scan_stm(struct wl1271 *wl) |
| { |
| int ret; |
| |
| switch (wl->scan.state) { |
| case WL1271_SCAN_STATE_IDLE: |
| break; |
| |
| case WL1271_SCAN_STATE_2GHZ_ACTIVE: |
| ret = wl1271_scan_send(wl, IEEE80211_BAND_2GHZ, false, |
| wl->conf.tx.basic_rate); |
| if (ret == WL1271_NOTHING_TO_SCAN) { |
| wl->scan.state = WL1271_SCAN_STATE_2GHZ_PASSIVE; |
| wl1271_scan_stm(wl); |
| } |
| |
| break; |
| |
| case WL1271_SCAN_STATE_2GHZ_PASSIVE: |
| ret = wl1271_scan_send(wl, IEEE80211_BAND_2GHZ, true, |
| wl->conf.tx.basic_rate); |
| if (ret == WL1271_NOTHING_TO_SCAN) { |
| if (wl1271_11a_enabled()) |
| wl->scan.state = WL1271_SCAN_STATE_5GHZ_ACTIVE; |
| else |
| wl->scan.state = WL1271_SCAN_STATE_DONE; |
| wl1271_scan_stm(wl); |
| } |
| |
| break; |
| |
| case WL1271_SCAN_STATE_5GHZ_ACTIVE: |
| ret = wl1271_scan_send(wl, IEEE80211_BAND_5GHZ, false, |
| wl->conf.tx.basic_rate_5); |
| if (ret == WL1271_NOTHING_TO_SCAN) { |
| wl->scan.state = WL1271_SCAN_STATE_5GHZ_PASSIVE; |
| wl1271_scan_stm(wl); |
| } |
| |
| break; |
| |
| case WL1271_SCAN_STATE_5GHZ_PASSIVE: |
| ret = wl1271_scan_send(wl, IEEE80211_BAND_5GHZ, true, |
| wl->conf.tx.basic_rate_5); |
| if (ret == WL1271_NOTHING_TO_SCAN) { |
| wl->scan.state = WL1271_SCAN_STATE_DONE; |
| wl1271_scan_stm(wl); |
| } |
| |
| break; |
| |
| case WL1271_SCAN_STATE_DONE: |
| mutex_unlock(&wl->mutex); |
| ieee80211_scan_completed(wl->hw, false); |
| mutex_lock(&wl->mutex); |
| |
| kfree(wl->scan.scanned_ch); |
| wl->scan.scanned_ch = NULL; |
| |
| wl->scan.state = WL1271_SCAN_STATE_IDLE; |
| break; |
| |
| default: |
| wl1271_error("invalid scan state"); |
| break; |
| } |
| } |
| |
| int wl1271_scan(struct wl1271 *wl, const u8 *ssid, size_t ssid_len, |
| struct cfg80211_scan_request *req) |
| { |
| if (wl->scan.state != WL1271_SCAN_STATE_IDLE) |
| return -EBUSY; |
| |
| wl->scan.state = WL1271_SCAN_STATE_2GHZ_ACTIVE; |
| |
| if (ssid_len && ssid) { |
| wl->scan.ssid_len = ssid_len; |
| memcpy(wl->scan.ssid, ssid, ssid_len); |
| } else { |
| wl->scan.ssid_len = 0; |
| } |
| |
| wl->scan.req = req; |
| |
| wl->scan.scanned_ch = kzalloc(req->n_channels * |
| sizeof(*wl->scan.scanned_ch), |
| GFP_KERNEL); |
| wl1271_scan_stm(wl); |
| |
| return 0; |
| } |