UAPI: Unexport linux/blk_types.h
It seems that was linux/blk_types.h incorrectly exported to fix up some missing
bits required by the exported parts of linux/fs.h (READ, WRITE, READA, etc.).
So unexport linux/blk_types.h and unexport the relevant bits of linux/fs.h.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jens Axboe <jaxboe@fusionio.com>
cc: Tejun Heo <tj@kernel.org>
cc: Al Viro <viro@ZenIV.linux.org.uk>
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 65fbf57..8cb86cf 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -8,7 +8,6 @@
#include <linux/limits.h>
#include <linux/ioctl.h>
-#include <linux/blk_types.h>
#include <linux/types.h>
/*
@@ -118,65 +117,6 @@
#define FMODE_NONOTIFY ((__force fmode_t)0x1000000)
/*
- * The below are the various read and write types that we support. Some of
- * them include behavioral modifiers that send information down to the
- * block layer and IO scheduler. Terminology:
- *
- * The block layer uses device plugging to defer IO a little bit, in
- * the hope that we will see more IO very shortly. This increases
- * coalescing of adjacent IO and thus reduces the number of IOs we
- * have to send to the device. It also allows for better queuing,
- * if the IO isn't mergeable. If the caller is going to be waiting
- * for the IO, then he must ensure that the device is unplugged so
- * that the IO is dispatched to the driver.
- *
- * All IO is handled async in Linux. This is fine for background
- * writes, but for reads or writes that someone waits for completion
- * on, we want to notify the block layer and IO scheduler so that they
- * know about it. That allows them to make better scheduling
- * decisions. So when the below references 'sync' and 'async', it
- * is referencing this priority hint.
- *
- * With that in mind, the available types are:
- *
- * READ A normal read operation. Device will be plugged.
- * READ_SYNC A synchronous read. Device is not plugged, caller can
- * immediately wait on this read without caring about
- * unplugging.
- * READA Used for read-ahead operations. Lower priority, and the
- * block layer could (in theory) choose to ignore this
- * request if it runs into resource problems.
- * WRITE A normal async write. Device will be plugged.
- * WRITE_SYNC Synchronous write. Identical to WRITE, but passes down
- * the hint that someone will be waiting on this IO
- * shortly. The write equivalent of READ_SYNC.
- * WRITE_ODIRECT Special case write for O_DIRECT only.
- * WRITE_FLUSH Like WRITE_SYNC but with preceding cache flush.
- * WRITE_FUA Like WRITE_SYNC but data is guaranteed to be on
- * non-volatile media on completion.
- * WRITE_FLUSH_FUA Combination of WRITE_FLUSH and FUA. The IO is preceded
- * by a cache flush and data is guaranteed to be on
- * non-volatile media on completion.
- *
- */
-#define RW_MASK REQ_WRITE
-#define RWA_MASK REQ_RAHEAD
-
-#define READ 0
-#define WRITE RW_MASK
-#define READA RWA_MASK
-#define KERNEL_READ (READ|REQ_KERNEL)
-#define KERNEL_WRITE (WRITE|REQ_KERNEL)
-
-#define READ_SYNC (READ | REQ_SYNC)
-#define WRITE_SYNC (WRITE | REQ_SYNC | REQ_NOIDLE)
-#define WRITE_ODIRECT (WRITE | REQ_SYNC)
-#define WRITE_FLUSH (WRITE | REQ_SYNC | REQ_NOIDLE | REQ_FLUSH)
-#define WRITE_FUA (WRITE | REQ_SYNC | REQ_NOIDLE | REQ_FUA)
-#define WRITE_FLUSH_FUA (WRITE | REQ_SYNC | REQ_NOIDLE | REQ_FLUSH | REQ_FUA)
-
-
-/*
* Flag for rw_copy_check_uvector and compat_rw_copy_check_uvector
* that indicates that they should check the contents of the iovec are
* valid, but not check the memory that the iovec elements
@@ -417,6 +357,7 @@
#include <linux/uidgid.h>
#include <linux/lockdep.h>
#include <linux/percpu-rwsem.h>
+#include <linux/blk_types.h>
#include <asm/byteorder.h>
@@ -454,6 +395,64 @@
bool is_async);
/*
+ * The below are the various read and write types that we support. Some of
+ * them include behavioral modifiers that send information down to the
+ * block layer and IO scheduler. Terminology:
+ *
+ * The block layer uses device plugging to defer IO a little bit, in
+ * the hope that we will see more IO very shortly. This increases
+ * coalescing of adjacent IO and thus reduces the number of IOs we
+ * have to send to the device. It also allows for better queuing,
+ * if the IO isn't mergeable. If the caller is going to be waiting
+ * for the IO, then he must ensure that the device is unplugged so
+ * that the IO is dispatched to the driver.
+ *
+ * All IO is handled async in Linux. This is fine for background
+ * writes, but for reads or writes that someone waits for completion
+ * on, we want to notify the block layer and IO scheduler so that they
+ * know about it. That allows them to make better scheduling
+ * decisions. So when the below references 'sync' and 'async', it
+ * is referencing this priority hint.
+ *
+ * With that in mind, the available types are:
+ *
+ * READ A normal read operation. Device will be plugged.
+ * READ_SYNC A synchronous read. Device is not plugged, caller can
+ * immediately wait on this read without caring about
+ * unplugging.
+ * READA Used for read-ahead operations. Lower priority, and the
+ * block layer could (in theory) choose to ignore this
+ * request if it runs into resource problems.
+ * WRITE A normal async write. Device will be plugged.
+ * WRITE_SYNC Synchronous write. Identical to WRITE, but passes down
+ * the hint that someone will be waiting on this IO
+ * shortly. The write equivalent of READ_SYNC.
+ * WRITE_ODIRECT Special case write for O_DIRECT only.
+ * WRITE_FLUSH Like WRITE_SYNC but with preceding cache flush.
+ * WRITE_FUA Like WRITE_SYNC but data is guaranteed to be on
+ * non-volatile media on completion.
+ * WRITE_FLUSH_FUA Combination of WRITE_FLUSH and FUA. The IO is preceded
+ * by a cache flush and data is guaranteed to be on
+ * non-volatile media on completion.
+ *
+ */
+#define RW_MASK REQ_WRITE
+#define RWA_MASK REQ_RAHEAD
+
+#define READ 0
+#define WRITE RW_MASK
+#define READA RWA_MASK
+#define KERNEL_READ (READ|REQ_KERNEL)
+#define KERNEL_WRITE (WRITE|REQ_KERNEL)
+
+#define READ_SYNC (READ | REQ_SYNC)
+#define WRITE_SYNC (WRITE | REQ_SYNC | REQ_NOIDLE)
+#define WRITE_ODIRECT (WRITE | REQ_SYNC)
+#define WRITE_FLUSH (WRITE | REQ_SYNC | REQ_NOIDLE | REQ_FLUSH)
+#define WRITE_FUA (WRITE | REQ_SYNC | REQ_NOIDLE | REQ_FUA)
+#define WRITE_FLUSH_FUA (WRITE | REQ_SYNC | REQ_NOIDLE | REQ_FLUSH | REQ_FUA)
+
+/*
* Attribute flags. These should be or-ed together to figure out what
* has been changed!
*/