drivers/misc/mei/hw-me.c - kernel/msm-4.19 - Gitiles

 /*
  *
  * Intel Management Engine Interface (Intel MEI) Linux driver
  * Copyright (c) 2003-2012, Intel Corporation.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
  * version 2, as published by the Free Software Foundation.
  *
  * This program is distributed in the hope it will be useful, but WITHOUT
  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  * more details.
  *
  */

 #include <linux/pci.h>

 #include <linux/kthread.h>
 #include <linux/interrupt.h>

 #include "mei_dev.h"
 #include "hw-me.h"

 #include "hbm.h"


 /**
  * mei_me_reg_read - Reads 32bit data from the mei device
  *
  * @dev: the device structure
  * @offset: offset from which to read the data
  *
  * returns register value (u32)
  */
 static inline u32 mei_me_reg_read(const struct mei_me_hw *hw,
 			       unsigned long offset)
 {
 	return ioread32(hw->mem_addr + offset);
 }


 /**
  * mei_me_reg_write - Writes 32bit data to the mei device
  *
  * @dev: the device structure
  * @offset: offset from which to write the data
  * @value: register value to write (u32)
  */
 static inline void mei_me_reg_write(const struct mei_me_hw *hw,
 				 unsigned long offset, u32 value)
 {
 	iowrite32(value, hw->mem_addr + offset);
 }

 /**
  * mei_me_mecbrw_read - Reads 32bit data from ME circular buffer
  *  read window register
  *
  * @dev: the device structure
  *
  * returns ME_CB_RW register value (u32)
  */
 static u32 mei_me_mecbrw_read(const struct mei_device *dev)
 {
 	return mei_me_reg_read(to_me_hw(dev), ME_CB_RW);
 }
 /**
  * mei_me_mecsr_read - Reads 32bit data from the ME CSR
  *
  * @dev: the device structure
  *
  * returns ME_CSR_HA register value (u32)
  */
 static inline u32 mei_me_mecsr_read(const struct mei_me_hw *hw)
 {
 	return mei_me_reg_read(hw, ME_CSR_HA);
 }

 /**
  * mei_hcsr_read - Reads 32bit data from the host CSR
  *
  * @dev: the device structure
  *
  * returns H_CSR register value (u32)
  */
 static inline u32 mei_hcsr_read(const struct mei_me_hw *hw)
 {
 	return mei_me_reg_read(hw, H_CSR);
 }

 /**
  * mei_hcsr_set - writes H_CSR register to the mei device,
  * and ignores the H_IS bit for it is write-one-to-zero.
  *
  * @dev: the device structure
  */
 static inline void mei_hcsr_set(struct mei_me_hw *hw, u32 hcsr)
 {
 	hcsr &= ~H_IS;
 	mei_me_reg_write(hw, H_CSR, hcsr);
 }


 /**
  * mei_me_hw_config - configure hw dependent settings
  *
  * @dev: mei device
  */
 static void mei_me_hw_config(struct mei_device *dev)
 {
 	u32 hcsr = mei_hcsr_read(to_me_hw(dev));
 	/* Doesn't change in runtime */
 	dev->hbuf_depth = (hcsr & H_CBD) >> 24;
 }
 /**
  * mei_clear_interrupts - clear and stop interrupts
  *
  * @dev: the device structure
  */
 static void mei_me_intr_clear(struct mei_device *dev)
 {
 	struct mei_me_hw *hw = to_me_hw(dev);
 	u32 hcsr = mei_hcsr_read(hw);
 	if ((hcsr & H_IS) == H_IS)
 		mei_me_reg_write(hw, H_CSR, hcsr);
 }
 /**
  * mei_me_intr_enable - enables mei device interrupts
  *
  * @dev: the device structure
  */
 static void mei_me_intr_enable(struct mei_device *dev)
 {
 	struct mei_me_hw *hw = to_me_hw(dev);
 	u32 hcsr = mei_hcsr_read(hw);
 	hcsr |= H_IE;
 	mei_hcsr_set(hw, hcsr);
 }

 /**
  * mei_disable_interrupts - disables mei device interrupts
  *
  * @dev: the device structure
  */
 static void mei_me_intr_disable(struct mei_device *dev)
 {
 	struct mei_me_hw *hw = to_me_hw(dev);
 	u32 hcsr = mei_hcsr_read(hw);
 	hcsr  &= ~H_IE;
 	mei_hcsr_set(hw, hcsr);
 }

 /**
  * mei_me_hw_reset_release - release device from the reset
  *
  * @dev: the device structure
  */
 static void mei_me_hw_reset_release(struct mei_device *dev)
 {
 	struct mei_me_hw *hw = to_me_hw(dev);
 	u32 hcsr = mei_hcsr_read(hw);

 	hcsr |= H_IG;
 	hcsr &= ~H_RST;
 	mei_hcsr_set(hw, hcsr);
 }
 /**
  * mei_me_hw_reset - resets fw via mei csr register.
  *
  * @dev: the device structure
  * @intr_enable: if interrupt should be enabled after reset.
  */
 static void mei_me_hw_reset(struct mei_device *dev, bool intr_enable)
 {
 	struct mei_me_hw *hw = to_me_hw(dev);
 	u32 hcsr = mei_hcsr_read(hw);

 	dev_dbg(&dev->pdev->dev, "before reset HCSR = 0x%08x.\n", hcsr);

 	hcsr |= (H_RST | H_IG);

 	if (intr_enable)
 		hcsr |= H_IE;
 	else
 		hcsr |= ~H_IE;

 	mei_hcsr_set(hw, hcsr);

 	if (dev->dev_state == MEI_DEV_POWER_DOWN)
 		mei_me_hw_reset_release(dev);

 	dev_dbg(&dev->pdev->dev, "current HCSR = 0x%08x.\n", mei_hcsr_read(hw));
 }

 /**
  * mei_me_host_set_ready - enable device
  *
  * @dev - mei device
  * returns bool
  */

 static void mei_me_host_set_ready(struct mei_device *dev)
 {
 	struct mei_me_hw *hw = to_me_hw(dev);
 	hw->host_hw_state |= H_IE | H_IG | H_RDY;
 	mei_hcsr_set(hw, hw->host_hw_state);
 }
 /**
  * mei_me_host_is_ready - check whether the host has turned ready
  *
  * @dev - mei device
  * returns bool
  */
 static bool mei_me_host_is_ready(struct mei_device *dev)
 {
 	struct mei_me_hw *hw = to_me_hw(dev);
 	hw->host_hw_state = mei_hcsr_read(hw);
 	return (hw->host_hw_state & H_RDY) == H_RDY;
 }

 /**
  * mei_me_hw_is_ready - check whether the me(hw) has turned ready
  *
  * @dev - mei device
  * returns bool
  */
 static bool mei_me_hw_is_ready(struct mei_device *dev)
 {
 	struct mei_me_hw *hw = to_me_hw(dev);
 	hw->me_hw_state = mei_me_mecsr_read(hw);
 	return (hw->me_hw_state & ME_RDY_HRA) == ME_RDY_HRA;
 }

 static int mei_me_hw_ready_wait(struct mei_device *dev)
 {
 	int err;
 	if (mei_me_hw_is_ready(dev))
 		return 0;

 	mutex_unlock(&dev->device_lock);
 	err = wait_event_interruptible_timeout(dev->wait_hw_ready,
 			dev->recvd_hw_ready, MEI_INTEROP_TIMEOUT);
 	mutex_lock(&dev->device_lock);
 	if (!err && !dev->recvd_hw_ready) {
 		dev_err(&dev->pdev->dev,
 			"wait hw ready failed. status = 0x%x\n", err);
 		return -ETIMEDOUT;
 	}

 	dev->recvd_hw_ready = false;
 	return 0;
 }

 static int mei_me_hw_start(struct mei_device *dev)
 {
 	int ret = mei_me_hw_ready_wait(dev);
 	if (ret)
 		return ret;
 	dev_dbg(&dev->pdev->dev, "hw is ready\n");

 	mei_me_host_set_ready(dev);
 	return ret;
 }


 /**
  * mei_hbuf_filled_slots - gets number of device filled buffer slots
  *
  * @dev: the device structure
  *
  * returns number of filled slots
  */
 static unsigned char mei_hbuf_filled_slots(struct mei_device *dev)
 {
 	struct mei_me_hw *hw = to_me_hw(dev);
 	char read_ptr, write_ptr;

 	hw->host_hw_state = mei_hcsr_read(hw);

 	read_ptr = (char) ((hw->host_hw_state & H_CBRP) >> 8);
 	write_ptr = (char) ((hw->host_hw_state & H_CBWP) >> 16);

 	return (unsigned char) (write_ptr - read_ptr);
 }

 /**
  * mei_me_hbuf_is_empty - checks if host buffer is empty.
  *
  * @dev: the device structure
  *
  * returns true if empty, false - otherwise.
  */
 static bool mei_me_hbuf_is_empty(struct mei_device *dev)
 {
 	return mei_hbuf_filled_slots(dev) == 0;
 }

 /**
  * mei_me_hbuf_empty_slots - counts write empty slots.
  *
  * @dev: the device structure
  *
  * returns -1(ESLOTS_OVERFLOW) if overflow, otherwise empty slots count
  */
 static int mei_me_hbuf_empty_slots(struct mei_device *dev)
 {
 	unsigned char filled_slots, empty_slots;

 	filled_slots = mei_hbuf_filled_slots(dev);
 	empty_slots = dev->hbuf_depth - filled_slots;

 	/* check for overflow */
 	if (filled_slots > dev->hbuf_depth)
 		return -EOVERFLOW;

 	return empty_slots;
 }

 static size_t mei_me_hbuf_max_len(const struct mei_device *dev)
 {
 	return dev->hbuf_depth * sizeof(u32) - sizeof(struct mei_msg_hdr);
 }


 /**
  * mei_write_message - writes a message to mei device.
  *
  * @dev: the device structure
  * @header: mei HECI header of message
  * @buf: message payload will be written
  *
  * This function returns -EIO if write has failed
  */
 static int mei_me_write_message(struct mei_device *dev,
 			struct mei_msg_hdr *header,
 			unsigned char *buf)
 {
 	struct mei_me_hw *hw = to_me_hw(dev);
 	unsigned long rem;
 	unsigned long length = header->length;
 	u32 *reg_buf = (u32 *)buf;
 	u32 hcsr;
 	u32 dw_cnt;
 	int i;
 	int empty_slots;

 	dev_dbg(&dev->pdev->dev, MEI_HDR_FMT, MEI_HDR_PRM(header));

 	empty_slots = mei_hbuf_empty_slots(dev);
 	dev_dbg(&dev->pdev->dev, "empty slots = %hu.\n", empty_slots);

 	dw_cnt = mei_data2slots(length);
 	if (empty_slots < 0 || dw_cnt > empty_slots)
 		return -EIO;

 	mei_me_reg_write(hw, H_CB_WW, *((u32 *) header));

 	for (i = 0; i < length / 4; i++)
 		mei_me_reg_write(hw, H_CB_WW, reg_buf[i]);

 	rem = length & 0x3;
 	if (rem > 0) {
 		u32 reg = 0;
 		memcpy(&reg, &buf[length - rem], rem);
 		mei_me_reg_write(hw, H_CB_WW, reg);
 	}

 	hcsr = mei_hcsr_read(hw) | H_IG;
 	mei_hcsr_set(hw, hcsr);
 	if (!mei_me_hw_is_ready(dev))
 		return -EIO;

 	return 0;
 }

 /**
  * mei_me_count_full_read_slots - counts read full slots.
  *
  * @dev: the device structure
  *
  * returns -1(ESLOTS_OVERFLOW) if overflow, otherwise filled slots count
  */
 static int mei_me_count_full_read_slots(struct mei_device *dev)
 {
 	struct mei_me_hw *hw = to_me_hw(dev);
 	char read_ptr, write_ptr;
 	unsigned char buffer_depth, filled_slots;

 	hw->me_hw_state = mei_me_mecsr_read(hw);
 	buffer_depth = (unsigned char)((hw->me_hw_state & ME_CBD_HRA) >> 24);
 	read_ptr = (char) ((hw->me_hw_state & ME_CBRP_HRA) >> 8);
 	write_ptr = (char) ((hw->me_hw_state & ME_CBWP_HRA) >> 16);
 	filled_slots = (unsigned char) (write_ptr - read_ptr);

 	/* check for overflow */
 	if (filled_slots > buffer_depth)
 		return -EOVERFLOW;

 	dev_dbg(&dev->pdev->dev, "filled_slots =%08x\n", filled_slots);
 	return (int)filled_slots;
 }

 /**
  * mei_me_read_slots - reads a message from mei device.
  *
  * @dev: the device structure
  * @buffer: message buffer will be written
  * @buffer_length: message size will be read
  */
 static int mei_me_read_slots(struct mei_device *dev, unsigned char *buffer,
 		    unsigned long buffer_length)
 {
 	struct mei_me_hw *hw = to_me_hw(dev);
 	u32 *reg_buf = (u32 *)buffer;
 	u32 hcsr;

 	for (; buffer_length >= sizeof(u32); buffer_length -= sizeof(u32))
 		*reg_buf++ = mei_me_mecbrw_read(dev);

 	if (buffer_length > 0) {
 		u32 reg = mei_me_mecbrw_read(dev);
 		memcpy(reg_buf, &reg, buffer_length);
 	}

 	hcsr = mei_hcsr_read(hw) | H_IG;
 	mei_hcsr_set(hw, hcsr);
 	return 0;
 }

 /**
  * mei_me_irq_quick_handler - The ISR of the MEI device
  *
  * @irq: The irq number
  * @dev_id: pointer to the device structure
  *
  * returns irqreturn_t
  */

 irqreturn_t mei_me_irq_quick_handler(int irq, void *dev_id)
 {
 	struct mei_device *dev = (struct mei_device *) dev_id;
 	struct mei_me_hw *hw = to_me_hw(dev);
 	u32 csr_reg = mei_hcsr_read(hw);

 	if ((csr_reg & H_IS) != H_IS)
 		return IRQ_NONE;

 	/* clear H_IS bit in H_CSR */
 	mei_me_reg_write(hw, H_CSR, csr_reg);

 	return IRQ_WAKE_THREAD;
 }

 /**
  * mei_me_irq_thread_handler - function called after ISR to handle the interrupt
  * processing.
  *
  * @irq: The irq number
  * @dev_id: pointer to the device structure
  *
  * returns irqreturn_t
  *
  */
 irqreturn_t mei_me_irq_thread_handler(int irq, void *dev_id)
 {
 	struct mei_device *dev = (struct mei_device *) dev_id;
 	struct mei_cl_cb complete_list;
 	s32 slots;
 	int rets;

 	dev_dbg(&dev->pdev->dev, "function called after ISR to handle the interrupt processing.\n");
 	/* initialize our complete list */
 	mutex_lock(&dev->device_lock);
 	mei_io_list_init(&complete_list);

 	/* Ack the interrupt here
 	 * In case of MSI we don't go through the quick handler */
 	if (pci_dev_msi_enabled(dev->pdev))
 		mei_clear_interrupts(dev);

 	/* check if ME wants a reset */
 	if (!mei_hw_is_ready(dev) &&
 	    dev->dev_state != MEI_DEV_RESETTING &&
 	    dev->dev_state != MEI_DEV_INITIALIZING) {
 		dev_dbg(&dev->pdev->dev, "FW not ready.\n");
 		mei_reset(dev, 1);
 		mutex_unlock(&dev->device_lock);
 		return IRQ_HANDLED;
 	}

 	/*  check if we need to start the dev */
 	if (!mei_host_is_ready(dev)) {
 		if (mei_hw_is_ready(dev)) {
 			dev_dbg(&dev->pdev->dev, "we need to start the dev.\n");

 			dev->recvd_hw_ready = true;
 			wake_up_interruptible(&dev->wait_hw_ready);

 			mutex_unlock(&dev->device_lock);
 			return IRQ_HANDLED;
 		} else {
 			dev_dbg(&dev->pdev->dev, "Reset Completed.\n");
 			mei_me_hw_reset_release(dev);
 			mutex_unlock(&dev->device_lock);
 			return IRQ_HANDLED;
 		}
 	}
 	/* check slots available for reading */
 	slots = mei_count_full_read_slots(dev);
 	while (slots > 0) {
 		/* we have urgent data to send so break the read */
 		if (dev->wr_ext_msg.hdr.length)
 			break;
 		dev_dbg(&dev->pdev->dev, "slots =%08x\n", slots);
 		dev_dbg(&dev->pdev->dev, "call mei_irq_read_handler.\n");
 		rets = mei_irq_read_handler(dev, &complete_list, &slots);
 		if (rets)
 			goto end;
 	}
 	rets = mei_irq_write_handler(dev, &complete_list);
 end:
 	dev_dbg(&dev->pdev->dev, "end of bottom half function.\n");
 	dev->hbuf_is_ready = mei_hbuf_is_ready(dev);

 	mutex_unlock(&dev->device_lock);

 	mei_irq_compl_handler(dev, &complete_list);

 	return IRQ_HANDLED;
 }
 static const struct mei_hw_ops mei_me_hw_ops = {

 	.host_is_ready = mei_me_host_is_ready,

 	.hw_is_ready = mei_me_hw_is_ready,
 	.hw_reset = mei_me_hw_reset,
 	.hw_config = mei_me_hw_config,
 	.hw_start = mei_me_hw_start,

 	.intr_clear = mei_me_intr_clear,
 	.intr_enable = mei_me_intr_enable,
 	.intr_disable = mei_me_intr_disable,

 	.hbuf_free_slots = mei_me_hbuf_empty_slots,
 	.hbuf_is_ready = mei_me_hbuf_is_empty,
 	.hbuf_max_len = mei_me_hbuf_max_len,

 	.write = mei_me_write_message,

 	.rdbuf_full_slots = mei_me_count_full_read_slots,
 	.read_hdr = mei_me_mecbrw_read,
 	.read = mei_me_read_slots
 };

 /**
  * mei_me_dev_init - allocates and initializes the mei device structure
  *
  * @pdev: The pci device structure
  *
  * returns The mei_device_device pointer on success, NULL on failure.
  */
 struct mei_device *mei_me_dev_init(struct pci_dev *pdev)
 {
 	struct mei_device *dev;

 	dev = kzalloc(sizeof(struct mei_device) +
 			 sizeof(struct mei_me_hw), GFP_KERNEL);
 	if (!dev)
 		return NULL;

 	mei_device_init(dev);

 	dev->ops = &mei_me_hw_ops;

 	dev->pdev = pdev;
 	return dev;
 }
	/*
	*
	* Intel Management Engine Interface (Intel MEI) Linux driver
	* Copyright (c) 2003-2012, Intel Corporation.
	*
	* This program is free software; you can redistribute it and/or modify it
	* under the terms and conditions of the GNU General Public License,
	* version 2, as published by the Free Software Foundation.
	*
	* This program is distributed in the hope it will be useful, but WITHOUT
	* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
	* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
	* more details.
	*
	*/

	#include <linux/pci.h>

	#include <linux/kthread.h>
	#include <linux/interrupt.h>

	#include "mei_dev.h"
	#include "hw-me.h"

	#include "hbm.h"


	/**
	* mei_me_reg_read - Reads 32bit data from the mei device
	*
	* @dev: the device structure
	* @offset: offset from which to read the data
	*
	* returns register value (u32)
	*/
	static inline u32 mei_me_reg_read(const struct mei_me_hw *hw,
	unsigned long offset)
	{
	return ioread32(hw->mem_addr + offset);
	}


	/**
	* mei_me_reg_write - Writes 32bit data to the mei device
	*
	* @dev: the device structure
	* @offset: offset from which to write the data
	* @value: register value to write (u32)
	*/
	static inline void mei_me_reg_write(const struct mei_me_hw *hw,
	unsigned long offset, u32 value)
	{
	iowrite32(value, hw->mem_addr + offset);
	}

	/**
	* mei_me_mecbrw_read - Reads 32bit data from ME circular buffer
	* read window register
	*
	* @dev: the device structure
	*
	* returns ME_CB_RW register value (u32)
	*/
	static u32 mei_me_mecbrw_read(const struct mei_device *dev)
	{
	return mei_me_reg_read(to_me_hw(dev), ME_CB_RW);
	}
	/**
	* mei_me_mecsr_read - Reads 32bit data from the ME CSR
	*
	* @dev: the device structure
	*
	* returns ME_CSR_HA register value (u32)
	*/
	static inline u32 mei_me_mecsr_read(const struct mei_me_hw *hw)
	{
	return mei_me_reg_read(hw, ME_CSR_HA);
	}

	/**
	* mei_hcsr_read - Reads 32bit data from the host CSR
	*
	* @dev: the device structure
	*
	* returns H_CSR register value (u32)
	*/
	static inline u32 mei_hcsr_read(const struct mei_me_hw *hw)
	{
	return mei_me_reg_read(hw, H_CSR);
	}

	/**
	* mei_hcsr_set - writes H_CSR register to the mei device,
	* and ignores the H_IS bit for it is write-one-to-zero.
	*
	* @dev: the device structure
	*/
	static inline void mei_hcsr_set(struct mei_me_hw *hw, u32 hcsr)
	{
	hcsr &= ~H_IS;
	mei_me_reg_write(hw, H_CSR, hcsr);
	}


	/**
	* mei_me_hw_config - configure hw dependent settings
	*
	* @dev: mei device
	*/
	static void mei_me_hw_config(struct mei_device *dev)
	{
	u32 hcsr = mei_hcsr_read(to_me_hw(dev));
	/* Doesn't change in runtime */
	dev->hbuf_depth = (hcsr & H_CBD) >> 24;
	}
	/**
	* mei_clear_interrupts - clear and stop interrupts
	*
	* @dev: the device structure
	*/
	static void mei_me_intr_clear(struct mei_device *dev)
	{
	struct mei_me_hw *hw = to_me_hw(dev);
	u32 hcsr = mei_hcsr_read(hw);
	if ((hcsr & H_IS) == H_IS)
	mei_me_reg_write(hw, H_CSR, hcsr);
	}
	/**
	* mei_me_intr_enable - enables mei device interrupts
	*
	* @dev: the device structure
	*/
	static void mei_me_intr_enable(struct mei_device *dev)
	{
	struct mei_me_hw *hw = to_me_hw(dev);
	u32 hcsr = mei_hcsr_read(hw);
	hcsr \|= H_IE;
	mei_hcsr_set(hw, hcsr);
	}

	/**
	* mei_disable_interrupts - disables mei device interrupts
	*
	* @dev: the device structure
	*/
	static void mei_me_intr_disable(struct mei_device *dev)
	{
	struct mei_me_hw *hw = to_me_hw(dev);
	u32 hcsr = mei_hcsr_read(hw);
	hcsr &= ~H_IE;
	mei_hcsr_set(hw, hcsr);
	}

	/**
	* mei_me_hw_reset_release - release device from the reset
	*
	* @dev: the device structure
	*/
	static void mei_me_hw_reset_release(struct mei_device *dev)
	{
	struct mei_me_hw *hw = to_me_hw(dev);
	u32 hcsr = mei_hcsr_read(hw);

	hcsr \|= H_IG;
	hcsr &= ~H_RST;
	mei_hcsr_set(hw, hcsr);
	}
	/**
	* mei_me_hw_reset - resets fw via mei csr register.
	*
	* @dev: the device structure
	* @intr_enable: if interrupt should be enabled after reset.
	*/
	static void mei_me_hw_reset(struct mei_device *dev, bool intr_enable)
	{
	struct mei_me_hw *hw = to_me_hw(dev);
	u32 hcsr = mei_hcsr_read(hw);

	dev_dbg(&dev->pdev->dev, "before reset HCSR = 0x%08x.\n", hcsr);

	hcsr \|= (H_RST \| H_IG);

	if (intr_enable)
	hcsr \|= H_IE;
	else
	hcsr \|= ~H_IE;

	mei_hcsr_set(hw, hcsr);

	if (dev->dev_state == MEI_DEV_POWER_DOWN)
	mei_me_hw_reset_release(dev);

	dev_dbg(&dev->pdev->dev, "current HCSR = 0x%08x.\n", mei_hcsr_read(hw));
	}

	/**
	* mei_me_host_set_ready - enable device
	*
	* @dev - mei device
	* returns bool
	*/

	static void mei_me_host_set_ready(struct mei_device *dev)
	{
	struct mei_me_hw *hw = to_me_hw(dev);
	hw->host_hw_state \|= H_IE \| H_IG \| H_RDY;
	mei_hcsr_set(hw, hw->host_hw_state);
	}
	/**
	* mei_me_host_is_ready - check whether the host has turned ready
	*
	* @dev - mei device
	* returns bool
	*/
	static bool mei_me_host_is_ready(struct mei_device *dev)
	{
	struct mei_me_hw *hw = to_me_hw(dev);
	hw->host_hw_state = mei_hcsr_read(hw);
	return (hw->host_hw_state & H_RDY) == H_RDY;
	}

	/**
	* mei_me_hw_is_ready - check whether the me(hw) has turned ready
	*
	* @dev - mei device
	* returns bool
	*/
	static bool mei_me_hw_is_ready(struct mei_device *dev)
	{
	struct mei_me_hw *hw = to_me_hw(dev);
	hw->me_hw_state = mei_me_mecsr_read(hw);
	return (hw->me_hw_state & ME_RDY_HRA) == ME_RDY_HRA;
	}

	static int mei_me_hw_ready_wait(struct mei_device *dev)
	{
	int err;
	if (mei_me_hw_is_ready(dev))
	return 0;

	mutex_unlock(&dev->device_lock);
	err = wait_event_interruptible_timeout(dev->wait_hw_ready,
	dev->recvd_hw_ready, MEI_INTEROP_TIMEOUT);
	mutex_lock(&dev->device_lock);
	if (!err && !dev->recvd_hw_ready) {
	dev_err(&dev->pdev->dev,
	"wait hw ready failed. status = 0x%x\n", err);
	return -ETIMEDOUT;
	}

	dev->recvd_hw_ready = false;
	return 0;
	}

	static int mei_me_hw_start(struct mei_device *dev)
	{
	int ret = mei_me_hw_ready_wait(dev);
	if (ret)
	return ret;
	dev_dbg(&dev->pdev->dev, "hw is ready\n");

	mei_me_host_set_ready(dev);
	return ret;
	}


	/**
	* mei_hbuf_filled_slots - gets number of device filled buffer slots
	*
	* @dev: the device structure
	*
	* returns number of filled slots
	*/
	static unsigned char mei_hbuf_filled_slots(struct mei_device *dev)
	{
	struct mei_me_hw *hw = to_me_hw(dev);
	char read_ptr, write_ptr;

	hw->host_hw_state = mei_hcsr_read(hw);

	read_ptr = (char) ((hw->host_hw_state & H_CBRP) >> 8);
	write_ptr = (char) ((hw->host_hw_state & H_CBWP) >> 16);

	return (unsigned char) (write_ptr - read_ptr);
	}

	/**
	* mei_me_hbuf_is_empty - checks if host buffer is empty.
	*
	* @dev: the device structure
	*
	* returns true if empty, false - otherwise.
	*/
	static bool mei_me_hbuf_is_empty(struct mei_device *dev)
	{
	return mei_hbuf_filled_slots(dev) == 0;
	}

	/**
	* mei_me_hbuf_empty_slots - counts write empty slots.
	*
	* @dev: the device structure
	*
	* returns -1(ESLOTS_OVERFLOW) if overflow, otherwise empty slots count
	*/
	static int mei_me_hbuf_empty_slots(struct mei_device *dev)
	{
	unsigned char filled_slots, empty_slots;

	filled_slots = mei_hbuf_filled_slots(dev);
	empty_slots = dev->hbuf_depth - filled_slots;

	/* check for overflow */
	if (filled_slots > dev->hbuf_depth)
	return -EOVERFLOW;

	return empty_slots;
	}

	static size_t mei_me_hbuf_max_len(const struct mei_device *dev)
	{
	return dev->hbuf_depth * sizeof(u32) - sizeof(struct mei_msg_hdr);
	}


	/**
	* mei_write_message - writes a message to mei device.
	*
	* @dev: the device structure
	* @header: mei HECI header of message
	* @buf: message payload will be written
	*
	* This function returns -EIO if write has failed
	*/
	static int mei_me_write_message(struct mei_device *dev,
	struct mei_msg_hdr *header,
	unsigned char *buf)
	{
	struct mei_me_hw *hw = to_me_hw(dev);
	unsigned long rem;
	unsigned long length = header->length;
	u32 reg_buf = (u32 )buf;
	u32 hcsr;
	u32 dw_cnt;
	int i;
	int empty_slots;

	dev_dbg(&dev->pdev->dev, MEI_HDR_FMT, MEI_HDR_PRM(header));

	empty_slots = mei_hbuf_empty_slots(dev);
	dev_dbg(&dev->pdev->dev, "empty slots = %hu.\n", empty_slots);

	dw_cnt = mei_data2slots(length);
	if (empty_slots < 0 \|\| dw_cnt > empty_slots)
	return -EIO;

	mei_me_reg_write(hw, H_CB_WW, ((u32 ) header));

	for (i = 0; i < length / 4; i++)
	mei_me_reg_write(hw, H_CB_WW, reg_buf[i]);

	rem = length & 0x3;
	if (rem > 0) {
	u32 reg = 0;
	memcpy(&reg, &buf[length - rem], rem);
	mei_me_reg_write(hw, H_CB_WW, reg);
	}

	hcsr = mei_hcsr_read(hw) \| H_IG;
	mei_hcsr_set(hw, hcsr);
	if (!mei_me_hw_is_ready(dev))
	return -EIO;

	return 0;
	}

	/**
	* mei_me_count_full_read_slots - counts read full slots.
	*
	* @dev: the device structure
	*
	* returns -1(ESLOTS_OVERFLOW) if overflow, otherwise filled slots count
	*/
	static int mei_me_count_full_read_slots(struct mei_device *dev)
	{
	struct mei_me_hw *hw = to_me_hw(dev);
	char read_ptr, write_ptr;
	unsigned char buffer_depth, filled_slots;

	hw->me_hw_state = mei_me_mecsr_read(hw);
	buffer_depth = (unsigned char)((hw->me_hw_state & ME_CBD_HRA) >> 24);
	read_ptr = (char) ((hw->me_hw_state & ME_CBRP_HRA) >> 8);
	write_ptr = (char) ((hw->me_hw_state & ME_CBWP_HRA) >> 16);
	filled_slots = (unsigned char) (write_ptr - read_ptr);

	/* check for overflow */
	if (filled_slots > buffer_depth)
	return -EOVERFLOW;

	dev_dbg(&dev->pdev->dev, "filled_slots =%08x\n", filled_slots);
	return (int)filled_slots;
	}

	/**
	* mei_me_read_slots - reads a message from mei device.
	*
	* @dev: the device structure
	* @buffer: message buffer will be written
	* @buffer_length: message size will be read
	*/
	static int mei_me_read_slots(struct mei_device dev, unsigned char buffer,
	unsigned long buffer_length)
	{
	struct mei_me_hw *hw = to_me_hw(dev);
	u32 reg_buf = (u32 )buffer;
	u32 hcsr;

	for (; buffer_length >= sizeof(u32); buffer_length -= sizeof(u32))
	*reg_buf++ = mei_me_mecbrw_read(dev);

	if (buffer_length > 0) {
	u32 reg = mei_me_mecbrw_read(dev);
	memcpy(reg_buf, &reg, buffer_length);
	}

	hcsr = mei_hcsr_read(hw) \| H_IG;
	mei_hcsr_set(hw, hcsr);
	return 0;
	}

	/**
	* mei_me_irq_quick_handler - The ISR of the MEI device
	*
	* @irq: The irq number
	* @dev_id: pointer to the device structure
	*
	* returns irqreturn_t
	*/

	irqreturn_t mei_me_irq_quick_handler(int irq, void *dev_id)
	{
	struct mei_device dev = (struct mei_device ) dev_id;
	struct mei_me_hw *hw = to_me_hw(dev);
	u32 csr_reg = mei_hcsr_read(hw);

	if ((csr_reg & H_IS) != H_IS)
	return IRQ_NONE;

	/* clear H_IS bit in H_CSR */
	mei_me_reg_write(hw, H_CSR, csr_reg);

	return IRQ_WAKE_THREAD;
	}

	/**
	* mei_me_irq_thread_handler - function called after ISR to handle the interrupt
	* processing.
	*
	* @irq: The irq number
	* @dev_id: pointer to the device structure
	*
	* returns irqreturn_t
	*
	*/
	irqreturn_t mei_me_irq_thread_handler(int irq, void *dev_id)
	{
	struct mei_device dev = (struct mei_device ) dev_id;
	struct mei_cl_cb complete_list;
	s32 slots;
	int rets;

	dev_dbg(&dev->pdev->dev, "function called after ISR to handle the interrupt processing.\n");
	/* initialize our complete list */
	mutex_lock(&dev->device_lock);
	mei_io_list_init(&complete_list);

	/* Ack the interrupt here
	* In case of MSI we don't go through the quick handler */
	if (pci_dev_msi_enabled(dev->pdev))
	mei_clear_interrupts(dev);

	/* check if ME wants a reset */
	if (!mei_hw_is_ready(dev) &&
	dev->dev_state != MEI_DEV_RESETTING &&
	dev->dev_state != MEI_DEV_INITIALIZING) {
	dev_dbg(&dev->pdev->dev, "FW not ready.\n");
	mei_reset(dev, 1);
	mutex_unlock(&dev->device_lock);
	return IRQ_HANDLED;
	}

	/* check if we need to start the dev */
	if (!mei_host_is_ready(dev)) {
	if (mei_hw_is_ready(dev)) {
	dev_dbg(&dev->pdev->dev, "we need to start the dev.\n");

	dev->recvd_hw_ready = true;
	wake_up_interruptible(&dev->wait_hw_ready);

	mutex_unlock(&dev->device_lock);
	return IRQ_HANDLED;
	} else {
	dev_dbg(&dev->pdev->dev, "Reset Completed.\n");
	mei_me_hw_reset_release(dev);
	mutex_unlock(&dev->device_lock);
	return IRQ_HANDLED;
	}
	}
	/* check slots available for reading */
	slots = mei_count_full_read_slots(dev);
	while (slots > 0) {
	/* we have urgent data to send so break the read */
	if (dev->wr_ext_msg.hdr.length)
	break;
	dev_dbg(&dev->pdev->dev, "slots =%08x\n", slots);
	dev_dbg(&dev->pdev->dev, "call mei_irq_read_handler.\n");
	rets = mei_irq_read_handler(dev, &complete_list, &slots);
	if (rets)
	goto end;
	}
	rets = mei_irq_write_handler(dev, &complete_list);
	end:
	dev_dbg(&dev->pdev->dev, "end of bottom half function.\n");
	dev->hbuf_is_ready = mei_hbuf_is_ready(dev);

	mutex_unlock(&dev->device_lock);

	mei_irq_compl_handler(dev, &complete_list);

	return IRQ_HANDLED;
	}
	static const struct mei_hw_ops mei_me_hw_ops = {

	.host_is_ready = mei_me_host_is_ready,

	.hw_is_ready = mei_me_hw_is_ready,
	.hw_reset = mei_me_hw_reset,
	.hw_config = mei_me_hw_config,
	.hw_start = mei_me_hw_start,

	.intr_clear = mei_me_intr_clear,
	.intr_enable = mei_me_intr_enable,
	.intr_disable = mei_me_intr_disable,

	.hbuf_free_slots = mei_me_hbuf_empty_slots,
	.hbuf_is_ready = mei_me_hbuf_is_empty,
	.hbuf_max_len = mei_me_hbuf_max_len,

	.write = mei_me_write_message,

	.rdbuf_full_slots = mei_me_count_full_read_slots,
	.read_hdr = mei_me_mecbrw_read,
	.read = mei_me_read_slots
	};

	/**
	* mei_me_dev_init - allocates and initializes the mei device structure
	*
	* @pdev: The pci device structure
	*
	* returns The mei_device_device pointer on success, NULL on failure.
	*/
	struct mei_device mei_me_dev_init(struct pci_dev pdev)
	{
	struct mei_device *dev;

	dev = kzalloc(sizeof(struct mei_device) +
	sizeof(struct mei_me_hw), GFP_KERNEL);
	if (!dev)
	return NULL;

	mei_device_init(dev);

	dev->ops = &mei_me_hw_ops;

	dev->pdev = pdev;
	return dev;
	}