mlx4: 64-byte CQE/EQE support
ConnectX-3 devices can use either 64- or 32-byte completion queue
entries (CQEs) and event queue entries (EQEs). Using 64-byte
EQEs/CQEs performs better because each entry is aligned to a complete
cacheline. This patch queries the HCA's capabilities, and if it
supports 64-byte CQEs and EQES the driver will configure the HW to
work in 64-byte mode.
The 32-byte vs 64-byte mode is global per HCA and not per CQ or EQ.
Since this mode is global, userspace (libmlx4) must be updated to work
with the configured CQE size, and guests using SR-IOV virtual
functions need to know both EQE and CQE size.
In case one of the 64-byte CQE/EQE capabilities is activated, the
patch makes sure that older guest drivers that use the QUERY_DEV_FUNC
command (e.g as done in mlx4_core of Linux 3.3..3.6) will notice that
they need an update to be able to work with the PPF. This is done by
changing the returned pf_context_behaviour not to be zero any more. In
case none of these capabilities is activated that value remains zero
and older guest drivers can run OK.
The SRIOV related flow is as follows
1. the PPF does the detection of the new capabilities using
QUERY_DEV_CAP command.
2. the PPF activates the new capabilities using INIT_HCA.
3. the VF detects if the PPF activated the capabilities using
QUERY_HCA, and if this is the case activates them for itself too.
Note that the VF detects that it must be aware to the new PF behaviour
using QUERY_FUNC_CAP. Steps 1 and 2 apply also for native mode.
User space notification is done through a new field introduced in
struct mlx4_ib_ucontext which holds device capabilities for which user
space must take action. This changes the binary interface so the ABI
towards libmlx4 exposed through uverbs is bumped from 3 to 4 but only
when **needed** i.e. only when the driver does use 64-byte CQEs or
future device capabilities which must be in sync by user space. This
practice allows to work with unmodified libmlx4 on older devices (e.g
A0, B0) which don't support 64-byte CQEs.
In order to keep existing systems functional when they update to a
newer kernel that contains these changes in VF and userspace ABI, a
module parameter enable_64b_cqe_eqe must be set to enable 64-byte
mode; the default is currently false.
Signed-off-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
diff --git a/include/linux/mlx4/device.h b/include/linux/mlx4/device.h
index 6d1acb0..21821da 100644
--- a/include/linux/mlx4/device.h
+++ b/include/linux/mlx4/device.h
@@ -142,6 +142,8 @@
MLX4_DEV_CAP_FLAG_COUNTERS = 1LL << 48,
MLX4_DEV_CAP_FLAG_SENSE_SUPPORT = 1LL << 55,
MLX4_DEV_CAP_FLAG_PORT_MNG_CHG_EV = 1LL << 59,
+ MLX4_DEV_CAP_FLAG_64B_EQE = 1LL << 61,
+ MLX4_DEV_CAP_FLAG_64B_CQE = 1LL << 62
};
enum {
@@ -151,6 +153,20 @@
MLX4_DEV_CAP_FLAG2_FS_EN = 1LL << 3
};
+enum {
+ MLX4_DEV_CAP_64B_EQE_ENABLED = 1LL << 0,
+ MLX4_DEV_CAP_64B_CQE_ENABLED = 1LL << 1
+};
+
+enum {
+ MLX4_USER_DEV_CAP_64B_CQE = 1L << 0
+};
+
+enum {
+ MLX4_FUNC_CAP_64B_EQE_CQE = 1L << 0
+};
+
+
#define MLX4_ATTR_EXTENDED_PORT_INFO cpu_to_be16(0xff90)
enum {
@@ -419,6 +435,11 @@
u32 max_counters;
u8 port_ib_mtu[MLX4_MAX_PORTS + 1];
u16 sqp_demux;
+ u32 eqe_size;
+ u32 cqe_size;
+ u8 eqe_factor;
+ u32 userspace_caps; /* userspace must be aware of these */
+ u32 function_caps; /* VFs must be aware of these */
};
struct mlx4_buf_list {