| /* |
| Mantis PCI bridge driver |
| |
| Copyright (C) 2005, 2006 Manu Abraham (abraham.manu@gmail.com) |
| |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 2 of the License, or |
| (at your option) any later version. |
| |
| This program is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with this program; if not, write to the Free Software |
| Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| */ |
| |
| #include <asm/io.h> |
| #include <linux/ioport.h> |
| #include <linux/pci.h> |
| #include <linux/i2c.h> |
| |
| #include "dmxdev.h" |
| #include "dvbdev.h" |
| #include "dvb_demux.h" |
| #include "dvb_frontend.h" |
| #include "dvb_net.h" |
| |
| #include "mantis_common.h" |
| #include "mantis_reg.h" |
| #include "mantis_i2c.h" |
| |
| #define TRIALS 10000 |
| |
| static int mantis_i2c_read(struct mantis_pci *mantis, const struct i2c_msg *msg) |
| { |
| u32 rxd, i, stat, trials; |
| |
| dprintk(MANTIS_INFO, 0, " %s: Address=[0x%02x] <R>[ ", |
| __func__, msg->addr); |
| |
| for (i = 0; i < msg->len; i++) { |
| rxd = (msg->addr << 25) | (1 << 24) |
| | MANTIS_I2C_RATE_3 |
| | MANTIS_I2C_STOP |
| | MANTIS_I2C_PGMODE; |
| |
| if (i == (msg->len - 1)) |
| rxd &= ~MANTIS_I2C_STOP; |
| |
| mmwrite(MANTIS_INT_I2CDONE, MANTIS_INT_STAT); |
| mmwrite(rxd, MANTIS_I2CDATA_CTL); |
| |
| /* wait for xfer completion */ |
| for (trials = 0; trials < TRIALS; trials++) { |
| stat = mmread(MANTIS_INT_STAT); |
| if (stat & MANTIS_INT_I2CDONE) |
| break; |
| } |
| |
| dprintk(MANTIS_TMG, 0, "I2CDONE: trials=%d\n", trials); |
| |
| /* wait for xfer completion */ |
| for (trials = 0; trials < TRIALS; trials++) { |
| stat = mmread(MANTIS_INT_STAT); |
| if (stat & MANTIS_INT_I2CRACK) |
| break; |
| } |
| |
| dprintk(MANTIS_TMG, 0, "I2CRACK: trials=%d\n", trials); |
| |
| rxd = mmread(MANTIS_I2CDATA_CTL); |
| msg->buf[i] = (u8)((rxd >> 8) & 0xFF); |
| dprintk(MANTIS_INFO, 0, "%02x ", msg->buf[i]); |
| } |
| dprintk(MANTIS_INFO, 0, "]\n"); |
| |
| return 0; |
| } |
| |
| static int mantis_i2c_write(struct mantis_pci *mantis, const struct i2c_msg *msg) |
| { |
| int i; |
| u32 txd = 0, stat, trials; |
| |
| dprintk(MANTIS_INFO, 0, " %s: Address=[0x%02x] <W>[ ", |
| __func__, msg->addr); |
| |
| for (i = 0; i < msg->len; i++) { |
| dprintk(MANTIS_INFO, 0, "%02x ", msg->buf[i]); |
| txd = (msg->addr << 25) | (msg->buf[i] << 8) |
| | MANTIS_I2C_RATE_3 |
| | MANTIS_I2C_STOP |
| | MANTIS_I2C_PGMODE; |
| |
| if (i == (msg->len - 1)) |
| txd &= ~MANTIS_I2C_STOP; |
| |
| mmwrite(MANTIS_INT_I2CDONE, MANTIS_INT_STAT); |
| mmwrite(txd, MANTIS_I2CDATA_CTL); |
| |
| /* wait for xfer completion */ |
| for (trials = 0; trials < TRIALS; trials++) { |
| stat = mmread(MANTIS_INT_STAT); |
| if (stat & MANTIS_INT_I2CDONE) |
| break; |
| } |
| |
| dprintk(MANTIS_TMG, 0, "I2CDONE: trials=%d\n", trials); |
| |
| /* wait for xfer completion */ |
| for (trials = 0; trials < TRIALS; trials++) { |
| stat = mmread(MANTIS_INT_STAT); |
| if (stat & MANTIS_INT_I2CRACK) |
| break; |
| } |
| |
| dprintk(MANTIS_TMG, 0, "I2CRACK: trials=%d\n", trials); |
| } |
| dprintk(MANTIS_INFO, 0, "]\n"); |
| |
| return 0; |
| } |
| |
| static int mantis_i2c_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs, int num) |
| { |
| int ret = 0, i = 0, trials; |
| u32 stat, data, txd; |
| struct mantis_pci *mantis; |
| struct mantis_hwconfig *config; |
| |
| mantis = i2c_get_adapdata(adapter); |
| BUG_ON(!mantis); |
| config = mantis->hwconfig; |
| BUG_ON(!config); |
| |
| dprintk(MANTIS_DEBUG, 1, "Messages:%d", num); |
| mutex_lock(&mantis->i2c_lock); |
| |
| while (i < num) { |
| /* Byte MODE */ |
| if ((config->i2c_mode & MANTIS_BYTE_MODE) && |
| ((i + 1) < num) && |
| (msgs[i].len < 2) && |
| (msgs[i + 1].len < 2) && |
| (msgs[i + 1].flags & I2C_M_RD)) { |
| |
| dprintk(MANTIS_DEBUG, 0, " Byte MODE:\n"); |
| |
| /* Read operation */ |
| txd = msgs[i].addr << 25 | (0x1 << 24) |
| | (msgs[i].buf[0] << 16) |
| | MANTIS_I2C_RATE_3; |
| |
| mmwrite(txd, MANTIS_I2CDATA_CTL); |
| /* wait for xfer completion */ |
| for (trials = 0; trials < TRIALS; trials++) { |
| stat = mmread(MANTIS_INT_STAT); |
| if (stat & MANTIS_INT_I2CDONE) |
| break; |
| } |
| |
| /* check for xfer completion */ |
| if (stat & MANTIS_INT_I2CDONE) { |
| /* check xfer was acknowledged */ |
| if (stat & MANTIS_INT_I2CRACK) { |
| data = mmread(MANTIS_I2CDATA_CTL); |
| msgs[i + 1].buf[0] = (data >> 8) & 0xff; |
| dprintk(MANTIS_DEBUG, 0, " Byte <%d> RXD=0x%02x [%02x]\n", 0x0, data, msgs[i + 1].buf[0]); |
| } else { |
| /* I/O error */ |
| dprintk(MANTIS_ERROR, 1, " I/O error, LINE:%d", __LINE__); |
| ret = -EIO; |
| break; |
| } |
| } else { |
| /* I/O error */ |
| dprintk(MANTIS_ERROR, 1, " I/O error, LINE:%d", __LINE__); |
| ret = -EIO; |
| break; |
| } |
| i += 2; /* Write/Read operation in one go */ |
| } |
| |
| if (i < num) { |
| if (msgs[i].flags & I2C_M_RD) |
| ret = mantis_i2c_read(mantis, &msgs[i]); |
| else |
| ret = mantis_i2c_write(mantis, &msgs[i]); |
| |
| i++; |
| if (ret < 0) |
| goto bail_out; |
| } |
| |
| } |
| |
| mutex_unlock(&mantis->i2c_lock); |
| |
| return num; |
| |
| bail_out: |
| mutex_unlock(&mantis->i2c_lock); |
| return ret; |
| } |
| |
| static u32 mantis_i2c_func(struct i2c_adapter *adapter) |
| { |
| return I2C_FUNC_SMBUS_EMUL; |
| } |
| |
| static struct i2c_algorithm mantis_algo = { |
| .master_xfer = mantis_i2c_xfer, |
| .functionality = mantis_i2c_func, |
| }; |
| |
| int __devinit mantis_i2c_init(struct mantis_pci *mantis) |
| { |
| u32 intstat, intmask; |
| struct i2c_adapter *i2c_adapter = &mantis->adapter; |
| struct pci_dev *pdev = mantis->pdev; |
| |
| init_waitqueue_head(&mantis->i2c_wq); |
| mutex_init(&mantis->i2c_lock); |
| strncpy(i2c_adapter->name, "Mantis I2C", sizeof (i2c_adapter->name)); |
| i2c_set_adapdata(i2c_adapter, mantis); |
| |
| i2c_adapter->owner = THIS_MODULE; |
| i2c_adapter->class = I2C_CLASS_TV_DIGITAL; |
| i2c_adapter->algo = &mantis_algo; |
| i2c_adapter->algo_data = NULL; |
| i2c_adapter->timeout = 500; |
| i2c_adapter->retries = 3; |
| i2c_adapter->dev.parent = &pdev->dev; |
| |
| mantis->i2c_rc = i2c_add_adapter(i2c_adapter); |
| if (mantis->i2c_rc < 0) |
| return mantis->i2c_rc; |
| |
| dprintk(MANTIS_DEBUG, 1, "Initializing I2C .."); |
| |
| intstat = mmread(MANTIS_INT_STAT); |
| intmask = mmread(MANTIS_INT_MASK); |
| mmwrite(intstat, MANTIS_INT_STAT); |
| dprintk(MANTIS_DEBUG, 1, "Disabling I2C interrupt"); |
| intmask = mmread(MANTIS_INT_MASK); |
| mmwrite((intmask & ~MANTIS_INT_I2CDONE), MANTIS_INT_MASK); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(mantis_i2c_init); |
| |
| int __devexit mantis_i2c_exit(struct mantis_pci *mantis) |
| { |
| u32 intmask; |
| |
| dprintk(MANTIS_DEBUG, 1, "Disabling I2C interrupt"); |
| intmask = mmread(MANTIS_INT_MASK); |
| mmwrite((intmask & ~MANTIS_INT_I2CDONE), MANTIS_INT_MASK); |
| |
| dprintk(MANTIS_DEBUG, 1, "Removing I2C adapter"); |
| return i2c_del_adapter(&mantis->adapter); |
| } |
| EXPORT_SYMBOL_GPL(mantis_i2c_exit); |