| /*************************************************************************** |
| * |
| * Copyright (C) 2007-2010 SMSC |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version 2 |
| * of the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. |
| * |
| *****************************************************************************/ |
| |
| #include <linux/module.h> |
| #include <linux/kmod.h> |
| #include <linux/init.h> |
| #include <linux/netdevice.h> |
| #include <linux/etherdevice.h> |
| #include <linux/ethtool.h> |
| #include <linux/mii.h> |
| #include <linux/usb.h> |
| #include <linux/bitrev.h> |
| #include <linux/crc16.h> |
| #include <linux/crc32.h> |
| #include <linux/usb/usbnet.h> |
| #include <linux/slab.h> |
| #include "smsc75xx.h" |
| |
| #define SMSC_CHIPNAME "smsc75xx" |
| #define SMSC_DRIVER_VERSION "1.0.0" |
| #define HS_USB_PKT_SIZE (512) |
| #define FS_USB_PKT_SIZE (64) |
| #define DEFAULT_HS_BURST_CAP_SIZE (16 * 1024 + 5 * HS_USB_PKT_SIZE) |
| #define DEFAULT_FS_BURST_CAP_SIZE (6 * 1024 + 33 * FS_USB_PKT_SIZE) |
| #define DEFAULT_BULK_IN_DELAY (0x00002000) |
| #define MAX_SINGLE_PACKET_SIZE (9000) |
| #define LAN75XX_EEPROM_MAGIC (0x7500) |
| #define EEPROM_MAC_OFFSET (0x01) |
| #define DEFAULT_TX_CSUM_ENABLE (true) |
| #define DEFAULT_RX_CSUM_ENABLE (true) |
| #define DEFAULT_TSO_ENABLE (true) |
| #define SMSC75XX_INTERNAL_PHY_ID (1) |
| #define SMSC75XX_TX_OVERHEAD (8) |
| #define MAX_RX_FIFO_SIZE (20 * 1024) |
| #define MAX_TX_FIFO_SIZE (12 * 1024) |
| #define USB_VENDOR_ID_SMSC (0x0424) |
| #define USB_PRODUCT_ID_LAN7500 (0x7500) |
| #define USB_PRODUCT_ID_LAN7505 (0x7505) |
| #define RXW_PADDING 2 |
| #define SUPPORTED_WAKE (WAKE_PHY | WAKE_UCAST | WAKE_BCAST | \ |
| WAKE_MCAST | WAKE_ARP | WAKE_MAGIC) |
| |
| #define SUSPEND_SUSPEND0 (0x01) |
| #define SUSPEND_SUSPEND1 (0x02) |
| #define SUSPEND_SUSPEND2 (0x04) |
| #define SUSPEND_SUSPEND3 (0x08) |
| #define SUSPEND_ALLMODES (SUSPEND_SUSPEND0 | SUSPEND_SUSPEND1 | \ |
| SUSPEND_SUSPEND2 | SUSPEND_SUSPEND3) |
| |
| struct smsc75xx_priv { |
| struct usbnet *dev; |
| u32 rfe_ctl; |
| u32 wolopts; |
| u32 multicast_hash_table[DP_SEL_VHF_HASH_LEN]; |
| struct mutex dataport_mutex; |
| spinlock_t rfe_ctl_lock; |
| struct work_struct set_multicast; |
| u8 suspend_flags; |
| }; |
| |
| struct usb_context { |
| struct usb_ctrlrequest req; |
| struct usbnet *dev; |
| }; |
| |
| static bool turbo_mode = true; |
| module_param(turbo_mode, bool, 0644); |
| MODULE_PARM_DESC(turbo_mode, "Enable multiple frames per Rx transaction"); |
| |
| static int __must_check __smsc75xx_read_reg(struct usbnet *dev, u32 index, |
| u32 *data, int in_pm) |
| { |
| u32 buf; |
| int ret; |
| int (*fn)(struct usbnet *, u8, u8, u16, u16, void *, u16); |
| |
| BUG_ON(!dev); |
| |
| if (!in_pm) |
| fn = usbnet_read_cmd; |
| else |
| fn = usbnet_read_cmd_nopm; |
| |
| ret = fn(dev, USB_VENDOR_REQUEST_READ_REGISTER, USB_DIR_IN |
| | USB_TYPE_VENDOR | USB_RECIP_DEVICE, |
| 0, index, &buf, 4); |
| if (unlikely(ret < 0)) |
| netdev_warn(dev->net, "Failed to read reg index 0x%08x: %d\n", |
| index, ret); |
| |
| le32_to_cpus(&buf); |
| *data = buf; |
| |
| return ret; |
| } |
| |
| static int __must_check __smsc75xx_write_reg(struct usbnet *dev, u32 index, |
| u32 data, int in_pm) |
| { |
| u32 buf; |
| int ret; |
| int (*fn)(struct usbnet *, u8, u8, u16, u16, const void *, u16); |
| |
| BUG_ON(!dev); |
| |
| if (!in_pm) |
| fn = usbnet_write_cmd; |
| else |
| fn = usbnet_write_cmd_nopm; |
| |
| buf = data; |
| cpu_to_le32s(&buf); |
| |
| ret = fn(dev, USB_VENDOR_REQUEST_WRITE_REGISTER, USB_DIR_OUT |
| | USB_TYPE_VENDOR | USB_RECIP_DEVICE, |
| 0, index, &buf, 4); |
| if (unlikely(ret < 0)) |
| netdev_warn(dev->net, "Failed to write reg index 0x%08x: %d\n", |
| index, ret); |
| |
| return ret; |
| } |
| |
| static int __must_check smsc75xx_read_reg_nopm(struct usbnet *dev, u32 index, |
| u32 *data) |
| { |
| return __smsc75xx_read_reg(dev, index, data, 1); |
| } |
| |
| static int __must_check smsc75xx_write_reg_nopm(struct usbnet *dev, u32 index, |
| u32 data) |
| { |
| return __smsc75xx_write_reg(dev, index, data, 1); |
| } |
| |
| static int __must_check smsc75xx_read_reg(struct usbnet *dev, u32 index, |
| u32 *data) |
| { |
| return __smsc75xx_read_reg(dev, index, data, 0); |
| } |
| |
| static int __must_check smsc75xx_write_reg(struct usbnet *dev, u32 index, |
| u32 data) |
| { |
| return __smsc75xx_write_reg(dev, index, data, 0); |
| } |
| |
| /* Loop until the read is completed with timeout |
| * called with phy_mutex held */ |
| static __must_check int __smsc75xx_phy_wait_not_busy(struct usbnet *dev, |
| int in_pm) |
| { |
| unsigned long start_time = jiffies; |
| u32 val; |
| int ret; |
| |
| do { |
| ret = __smsc75xx_read_reg(dev, MII_ACCESS, &val, in_pm); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Error reading MII_ACCESS\n"); |
| return ret; |
| } |
| |
| if (!(val & MII_ACCESS_BUSY)) |
| return 0; |
| } while (!time_after(jiffies, start_time + HZ)); |
| |
| return -EIO; |
| } |
| |
| static int __smsc75xx_mdio_read(struct net_device *netdev, int phy_id, int idx, |
| int in_pm) |
| { |
| struct usbnet *dev = netdev_priv(netdev); |
| u32 val, addr; |
| int ret; |
| |
| mutex_lock(&dev->phy_mutex); |
| |
| /* confirm MII not busy */ |
| ret = __smsc75xx_phy_wait_not_busy(dev, in_pm); |
| if (ret < 0) { |
| netdev_warn(dev->net, "MII is busy in smsc75xx_mdio_read\n"); |
| goto done; |
| } |
| |
| /* set the address, index & direction (read from PHY) */ |
| phy_id &= dev->mii.phy_id_mask; |
| idx &= dev->mii.reg_num_mask; |
| addr = ((phy_id << MII_ACCESS_PHY_ADDR_SHIFT) & MII_ACCESS_PHY_ADDR) |
| | ((idx << MII_ACCESS_REG_ADDR_SHIFT) & MII_ACCESS_REG_ADDR) |
| | MII_ACCESS_READ | MII_ACCESS_BUSY; |
| ret = __smsc75xx_write_reg(dev, MII_ACCESS, addr, in_pm); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Error writing MII_ACCESS\n"); |
| goto done; |
| } |
| |
| ret = __smsc75xx_phy_wait_not_busy(dev, in_pm); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Timed out reading MII reg %02X\n", idx); |
| goto done; |
| } |
| |
| ret = __smsc75xx_read_reg(dev, MII_DATA, &val, in_pm); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Error reading MII_DATA\n"); |
| goto done; |
| } |
| |
| ret = (u16)(val & 0xFFFF); |
| |
| done: |
| mutex_unlock(&dev->phy_mutex); |
| return ret; |
| } |
| |
| static void __smsc75xx_mdio_write(struct net_device *netdev, int phy_id, |
| int idx, int regval, int in_pm) |
| { |
| struct usbnet *dev = netdev_priv(netdev); |
| u32 val, addr; |
| int ret; |
| |
| mutex_lock(&dev->phy_mutex); |
| |
| /* confirm MII not busy */ |
| ret = __smsc75xx_phy_wait_not_busy(dev, in_pm); |
| if (ret < 0) { |
| netdev_warn(dev->net, "MII is busy in smsc75xx_mdio_write\n"); |
| goto done; |
| } |
| |
| val = regval; |
| ret = __smsc75xx_write_reg(dev, MII_DATA, val, in_pm); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Error writing MII_DATA\n"); |
| goto done; |
| } |
| |
| /* set the address, index & direction (write to PHY) */ |
| phy_id &= dev->mii.phy_id_mask; |
| idx &= dev->mii.reg_num_mask; |
| addr = ((phy_id << MII_ACCESS_PHY_ADDR_SHIFT) & MII_ACCESS_PHY_ADDR) |
| | ((idx << MII_ACCESS_REG_ADDR_SHIFT) & MII_ACCESS_REG_ADDR) |
| | MII_ACCESS_WRITE | MII_ACCESS_BUSY; |
| ret = __smsc75xx_write_reg(dev, MII_ACCESS, addr, in_pm); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Error writing MII_ACCESS\n"); |
| goto done; |
| } |
| |
| ret = __smsc75xx_phy_wait_not_busy(dev, in_pm); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Timed out writing MII reg %02X\n", idx); |
| goto done; |
| } |
| |
| done: |
| mutex_unlock(&dev->phy_mutex); |
| } |
| |
| static int smsc75xx_mdio_read_nopm(struct net_device *netdev, int phy_id, |
| int idx) |
| { |
| return __smsc75xx_mdio_read(netdev, phy_id, idx, 1); |
| } |
| |
| static void smsc75xx_mdio_write_nopm(struct net_device *netdev, int phy_id, |
| int idx, int regval) |
| { |
| __smsc75xx_mdio_write(netdev, phy_id, idx, regval, 1); |
| } |
| |
| static int smsc75xx_mdio_read(struct net_device *netdev, int phy_id, int idx) |
| { |
| return __smsc75xx_mdio_read(netdev, phy_id, idx, 0); |
| } |
| |
| static void smsc75xx_mdio_write(struct net_device *netdev, int phy_id, int idx, |
| int regval) |
| { |
| __smsc75xx_mdio_write(netdev, phy_id, idx, regval, 0); |
| } |
| |
| static int smsc75xx_wait_eeprom(struct usbnet *dev) |
| { |
| unsigned long start_time = jiffies; |
| u32 val; |
| int ret; |
| |
| do { |
| ret = smsc75xx_read_reg(dev, E2P_CMD, &val); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Error reading E2P_CMD\n"); |
| return ret; |
| } |
| |
| if (!(val & E2P_CMD_BUSY) || (val & E2P_CMD_TIMEOUT)) |
| break; |
| udelay(40); |
| } while (!time_after(jiffies, start_time + HZ)); |
| |
| if (val & (E2P_CMD_TIMEOUT | E2P_CMD_BUSY)) { |
| netdev_warn(dev->net, "EEPROM read operation timeout\n"); |
| return -EIO; |
| } |
| |
| return 0; |
| } |
| |
| static int smsc75xx_eeprom_confirm_not_busy(struct usbnet *dev) |
| { |
| unsigned long start_time = jiffies; |
| u32 val; |
| int ret; |
| |
| do { |
| ret = smsc75xx_read_reg(dev, E2P_CMD, &val); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Error reading E2P_CMD\n"); |
| return ret; |
| } |
| |
| if (!(val & E2P_CMD_BUSY)) |
| return 0; |
| |
| udelay(40); |
| } while (!time_after(jiffies, start_time + HZ)); |
| |
| netdev_warn(dev->net, "EEPROM is busy\n"); |
| return -EIO; |
| } |
| |
| static int smsc75xx_read_eeprom(struct usbnet *dev, u32 offset, u32 length, |
| u8 *data) |
| { |
| u32 val; |
| int i, ret; |
| |
| BUG_ON(!dev); |
| BUG_ON(!data); |
| |
| ret = smsc75xx_eeprom_confirm_not_busy(dev); |
| if (ret) |
| return ret; |
| |
| for (i = 0; i < length; i++) { |
| val = E2P_CMD_BUSY | E2P_CMD_READ | (offset & E2P_CMD_ADDR); |
| ret = smsc75xx_write_reg(dev, E2P_CMD, val); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Error writing E2P_CMD\n"); |
| return ret; |
| } |
| |
| ret = smsc75xx_wait_eeprom(dev); |
| if (ret < 0) |
| return ret; |
| |
| ret = smsc75xx_read_reg(dev, E2P_DATA, &val); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Error reading E2P_DATA\n"); |
| return ret; |
| } |
| |
| data[i] = val & 0xFF; |
| offset++; |
| } |
| |
| return 0; |
| } |
| |
| static int smsc75xx_write_eeprom(struct usbnet *dev, u32 offset, u32 length, |
| u8 *data) |
| { |
| u32 val; |
| int i, ret; |
| |
| BUG_ON(!dev); |
| BUG_ON(!data); |
| |
| ret = smsc75xx_eeprom_confirm_not_busy(dev); |
| if (ret) |
| return ret; |
| |
| /* Issue write/erase enable command */ |
| val = E2P_CMD_BUSY | E2P_CMD_EWEN; |
| ret = smsc75xx_write_reg(dev, E2P_CMD, val); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Error writing E2P_CMD\n"); |
| return ret; |
| } |
| |
| ret = smsc75xx_wait_eeprom(dev); |
| if (ret < 0) |
| return ret; |
| |
| for (i = 0; i < length; i++) { |
| |
| /* Fill data register */ |
| val = data[i]; |
| ret = smsc75xx_write_reg(dev, E2P_DATA, val); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Error writing E2P_DATA\n"); |
| return ret; |
| } |
| |
| /* Send "write" command */ |
| val = E2P_CMD_BUSY | E2P_CMD_WRITE | (offset & E2P_CMD_ADDR); |
| ret = smsc75xx_write_reg(dev, E2P_CMD, val); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Error writing E2P_CMD\n"); |
| return ret; |
| } |
| |
| ret = smsc75xx_wait_eeprom(dev); |
| if (ret < 0) |
| return ret; |
| |
| offset++; |
| } |
| |
| return 0; |
| } |
| |
| static int smsc75xx_dataport_wait_not_busy(struct usbnet *dev) |
| { |
| int i, ret; |
| |
| for (i = 0; i < 100; i++) { |
| u32 dp_sel; |
| ret = smsc75xx_read_reg(dev, DP_SEL, &dp_sel); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Error reading DP_SEL\n"); |
| return ret; |
| } |
| |
| if (dp_sel & DP_SEL_DPRDY) |
| return 0; |
| |
| udelay(40); |
| } |
| |
| netdev_warn(dev->net, "smsc75xx_dataport_wait_not_busy timed out\n"); |
| |
| return -EIO; |
| } |
| |
| static int smsc75xx_dataport_write(struct usbnet *dev, u32 ram_select, u32 addr, |
| u32 length, u32 *buf) |
| { |
| struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]); |
| u32 dp_sel; |
| int i, ret; |
| |
| mutex_lock(&pdata->dataport_mutex); |
| |
| ret = smsc75xx_dataport_wait_not_busy(dev); |
| if (ret < 0) { |
| netdev_warn(dev->net, "smsc75xx_dataport_write busy on entry\n"); |
| goto done; |
| } |
| |
| ret = smsc75xx_read_reg(dev, DP_SEL, &dp_sel); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Error reading DP_SEL\n"); |
| goto done; |
| } |
| |
| dp_sel &= ~DP_SEL_RSEL; |
| dp_sel |= ram_select; |
| ret = smsc75xx_write_reg(dev, DP_SEL, dp_sel); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Error writing DP_SEL\n"); |
| goto done; |
| } |
| |
| for (i = 0; i < length; i++) { |
| ret = smsc75xx_write_reg(dev, DP_ADDR, addr + i); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Error writing DP_ADDR\n"); |
| goto done; |
| } |
| |
| ret = smsc75xx_write_reg(dev, DP_DATA, buf[i]); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Error writing DP_DATA\n"); |
| goto done; |
| } |
| |
| ret = smsc75xx_write_reg(dev, DP_CMD, DP_CMD_WRITE); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Error writing DP_CMD\n"); |
| goto done; |
| } |
| |
| ret = smsc75xx_dataport_wait_not_busy(dev); |
| if (ret < 0) { |
| netdev_warn(dev->net, "smsc75xx_dataport_write timeout\n"); |
| goto done; |
| } |
| } |
| |
| done: |
| mutex_unlock(&pdata->dataport_mutex); |
| return ret; |
| } |
| |
| /* returns hash bit number for given MAC address */ |
| static u32 smsc75xx_hash(char addr[ETH_ALEN]) |
| { |
| return (ether_crc(ETH_ALEN, addr) >> 23) & 0x1ff; |
| } |
| |
| static void smsc75xx_deferred_multicast_write(struct work_struct *param) |
| { |
| struct smsc75xx_priv *pdata = |
| container_of(param, struct smsc75xx_priv, set_multicast); |
| struct usbnet *dev = pdata->dev; |
| int ret; |
| |
| netif_dbg(dev, drv, dev->net, "deferred multicast write 0x%08x\n", |
| pdata->rfe_ctl); |
| |
| smsc75xx_dataport_write(dev, DP_SEL_VHF, DP_SEL_VHF_VLAN_LEN, |
| DP_SEL_VHF_HASH_LEN, pdata->multicast_hash_table); |
| |
| ret = smsc75xx_write_reg(dev, RFE_CTL, pdata->rfe_ctl); |
| if (ret < 0) |
| netdev_warn(dev->net, "Error writing RFE_CRL\n"); |
| } |
| |
| static void smsc75xx_set_multicast(struct net_device *netdev) |
| { |
| struct usbnet *dev = netdev_priv(netdev); |
| struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]); |
| unsigned long flags; |
| int i; |
| |
| spin_lock_irqsave(&pdata->rfe_ctl_lock, flags); |
| |
| pdata->rfe_ctl &= |
| ~(RFE_CTL_AU | RFE_CTL_AM | RFE_CTL_DPF | RFE_CTL_MHF); |
| pdata->rfe_ctl |= RFE_CTL_AB; |
| |
| for (i = 0; i < DP_SEL_VHF_HASH_LEN; i++) |
| pdata->multicast_hash_table[i] = 0; |
| |
| if (dev->net->flags & IFF_PROMISC) { |
| netif_dbg(dev, drv, dev->net, "promiscuous mode enabled\n"); |
| pdata->rfe_ctl |= RFE_CTL_AM | RFE_CTL_AU; |
| } else if (dev->net->flags & IFF_ALLMULTI) { |
| netif_dbg(dev, drv, dev->net, "receive all multicast enabled\n"); |
| pdata->rfe_ctl |= RFE_CTL_AM | RFE_CTL_DPF; |
| } else if (!netdev_mc_empty(dev->net)) { |
| struct netdev_hw_addr *ha; |
| |
| netif_dbg(dev, drv, dev->net, "receive multicast hash filter\n"); |
| |
| pdata->rfe_ctl |= RFE_CTL_MHF | RFE_CTL_DPF; |
| |
| netdev_for_each_mc_addr(ha, netdev) { |
| u32 bitnum = smsc75xx_hash(ha->addr); |
| pdata->multicast_hash_table[bitnum / 32] |= |
| (1 << (bitnum % 32)); |
| } |
| } else { |
| netif_dbg(dev, drv, dev->net, "receive own packets only\n"); |
| pdata->rfe_ctl |= RFE_CTL_DPF; |
| } |
| |
| spin_unlock_irqrestore(&pdata->rfe_ctl_lock, flags); |
| |
| /* defer register writes to a sleepable context */ |
| schedule_work(&pdata->set_multicast); |
| } |
| |
| static int smsc75xx_update_flowcontrol(struct usbnet *dev, u8 duplex, |
| u16 lcladv, u16 rmtadv) |
| { |
| u32 flow = 0, fct_flow = 0; |
| int ret; |
| |
| if (duplex == DUPLEX_FULL) { |
| u8 cap = mii_resolve_flowctrl_fdx(lcladv, rmtadv); |
| |
| if (cap & FLOW_CTRL_TX) { |
| flow = (FLOW_TX_FCEN | 0xFFFF); |
| /* set fct_flow thresholds to 20% and 80% */ |
| fct_flow = (8 << 8) | 32; |
| } |
| |
| if (cap & FLOW_CTRL_RX) |
| flow |= FLOW_RX_FCEN; |
| |
| netif_dbg(dev, link, dev->net, "rx pause %s, tx pause %s\n", |
| (cap & FLOW_CTRL_RX ? "enabled" : "disabled"), |
| (cap & FLOW_CTRL_TX ? "enabled" : "disabled")); |
| } else { |
| netif_dbg(dev, link, dev->net, "half duplex\n"); |
| } |
| |
| ret = smsc75xx_write_reg(dev, FLOW, flow); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Error writing FLOW\n"); |
| return ret; |
| } |
| |
| ret = smsc75xx_write_reg(dev, FCT_FLOW, fct_flow); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Error writing FCT_FLOW\n"); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int smsc75xx_link_reset(struct usbnet *dev) |
| { |
| struct mii_if_info *mii = &dev->mii; |
| struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET }; |
| u16 lcladv, rmtadv; |
| int ret; |
| |
| /* write to clear phy interrupt status */ |
| smsc75xx_mdio_write(dev->net, mii->phy_id, PHY_INT_SRC, |
| PHY_INT_SRC_CLEAR_ALL); |
| |
| ret = smsc75xx_write_reg(dev, INT_STS, INT_STS_CLEAR_ALL); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Error writing INT_STS\n"); |
| return ret; |
| } |
| |
| mii_check_media(mii, 1, 1); |
| mii_ethtool_gset(&dev->mii, &ecmd); |
| lcladv = smsc75xx_mdio_read(dev->net, mii->phy_id, MII_ADVERTISE); |
| rmtadv = smsc75xx_mdio_read(dev->net, mii->phy_id, MII_LPA); |
| |
| netif_dbg(dev, link, dev->net, "speed: %u duplex: %d lcladv: %04x rmtadv: %04x\n", |
| ethtool_cmd_speed(&ecmd), ecmd.duplex, lcladv, rmtadv); |
| |
| return smsc75xx_update_flowcontrol(dev, ecmd.duplex, lcladv, rmtadv); |
| } |
| |
| static void smsc75xx_status(struct usbnet *dev, struct urb *urb) |
| { |
| u32 intdata; |
| |
| if (urb->actual_length != 4) { |
| netdev_warn(dev->net, "unexpected urb length %d\n", |
| urb->actual_length); |
| return; |
| } |
| |
| memcpy(&intdata, urb->transfer_buffer, 4); |
| le32_to_cpus(&intdata); |
| |
| netif_dbg(dev, link, dev->net, "intdata: 0x%08X\n", intdata); |
| |
| if (intdata & INT_ENP_PHY_INT) |
| usbnet_defer_kevent(dev, EVENT_LINK_RESET); |
| else |
| netdev_warn(dev->net, "unexpected interrupt, intdata=0x%08X\n", |
| intdata); |
| } |
| |
| static int smsc75xx_ethtool_get_eeprom_len(struct net_device *net) |
| { |
| return MAX_EEPROM_SIZE; |
| } |
| |
| static int smsc75xx_ethtool_get_eeprom(struct net_device *netdev, |
| struct ethtool_eeprom *ee, u8 *data) |
| { |
| struct usbnet *dev = netdev_priv(netdev); |
| |
| ee->magic = LAN75XX_EEPROM_MAGIC; |
| |
| return smsc75xx_read_eeprom(dev, ee->offset, ee->len, data); |
| } |
| |
| static int smsc75xx_ethtool_set_eeprom(struct net_device *netdev, |
| struct ethtool_eeprom *ee, u8 *data) |
| { |
| struct usbnet *dev = netdev_priv(netdev); |
| |
| if (ee->magic != LAN75XX_EEPROM_MAGIC) { |
| netdev_warn(dev->net, "EEPROM: magic value mismatch: 0x%x\n", |
| ee->magic); |
| return -EINVAL; |
| } |
| |
| return smsc75xx_write_eeprom(dev, ee->offset, ee->len, data); |
| } |
| |
| static void smsc75xx_ethtool_get_wol(struct net_device *net, |
| struct ethtool_wolinfo *wolinfo) |
| { |
| struct usbnet *dev = netdev_priv(net); |
| struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]); |
| |
| wolinfo->supported = SUPPORTED_WAKE; |
| wolinfo->wolopts = pdata->wolopts; |
| } |
| |
| static int smsc75xx_ethtool_set_wol(struct net_device *net, |
| struct ethtool_wolinfo *wolinfo) |
| { |
| struct usbnet *dev = netdev_priv(net); |
| struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]); |
| int ret; |
| |
| pdata->wolopts = wolinfo->wolopts & SUPPORTED_WAKE; |
| |
| ret = device_set_wakeup_enable(&dev->udev->dev, pdata->wolopts); |
| if (ret < 0) |
| netdev_warn(dev->net, "device_set_wakeup_enable error %d\n", ret); |
| |
| return ret; |
| } |
| |
| static const struct ethtool_ops smsc75xx_ethtool_ops = { |
| .get_link = usbnet_get_link, |
| .nway_reset = usbnet_nway_reset, |
| .get_drvinfo = usbnet_get_drvinfo, |
| .get_msglevel = usbnet_get_msglevel, |
| .set_msglevel = usbnet_set_msglevel, |
| .get_settings = usbnet_get_settings, |
| .set_settings = usbnet_set_settings, |
| .get_eeprom_len = smsc75xx_ethtool_get_eeprom_len, |
| .get_eeprom = smsc75xx_ethtool_get_eeprom, |
| .set_eeprom = smsc75xx_ethtool_set_eeprom, |
| .get_wol = smsc75xx_ethtool_get_wol, |
| .set_wol = smsc75xx_ethtool_set_wol, |
| }; |
| |
| static int smsc75xx_ioctl(struct net_device *netdev, struct ifreq *rq, int cmd) |
| { |
| struct usbnet *dev = netdev_priv(netdev); |
| |
| if (!netif_running(netdev)) |
| return -EINVAL; |
| |
| return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL); |
| } |
| |
| static void smsc75xx_init_mac_address(struct usbnet *dev) |
| { |
| /* try reading mac address from EEPROM */ |
| if (smsc75xx_read_eeprom(dev, EEPROM_MAC_OFFSET, ETH_ALEN, |
| dev->net->dev_addr) == 0) { |
| if (is_valid_ether_addr(dev->net->dev_addr)) { |
| /* eeprom values are valid so use them */ |
| netif_dbg(dev, ifup, dev->net, |
| "MAC address read from EEPROM\n"); |
| return; |
| } |
| } |
| |
| /* no eeprom, or eeprom values are invalid. generate random MAC */ |
| eth_hw_addr_random(dev->net); |
| netif_dbg(dev, ifup, dev->net, "MAC address set to eth_random_addr\n"); |
| } |
| |
| static int smsc75xx_set_mac_address(struct usbnet *dev) |
| { |
| u32 addr_lo = dev->net->dev_addr[0] | dev->net->dev_addr[1] << 8 | |
| dev->net->dev_addr[2] << 16 | dev->net->dev_addr[3] << 24; |
| u32 addr_hi = dev->net->dev_addr[4] | dev->net->dev_addr[5] << 8; |
| |
| int ret = smsc75xx_write_reg(dev, RX_ADDRH, addr_hi); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Failed to write RX_ADDRH: %d\n", ret); |
| return ret; |
| } |
| |
| ret = smsc75xx_write_reg(dev, RX_ADDRL, addr_lo); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Failed to write RX_ADDRL: %d\n", ret); |
| return ret; |
| } |
| |
| addr_hi |= ADDR_FILTX_FB_VALID; |
| ret = smsc75xx_write_reg(dev, ADDR_FILTX, addr_hi); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Failed to write ADDR_FILTX: %d\n", ret); |
| return ret; |
| } |
| |
| ret = smsc75xx_write_reg(dev, ADDR_FILTX + 4, addr_lo); |
| if (ret < 0) |
| netdev_warn(dev->net, "Failed to write ADDR_FILTX+4: %d\n", ret); |
| |
| return ret; |
| } |
| |
| static int smsc75xx_phy_initialize(struct usbnet *dev) |
| { |
| int bmcr, ret, timeout = 0; |
| |
| /* Initialize MII structure */ |
| dev->mii.dev = dev->net; |
| dev->mii.mdio_read = smsc75xx_mdio_read; |
| dev->mii.mdio_write = smsc75xx_mdio_write; |
| dev->mii.phy_id_mask = 0x1f; |
| dev->mii.reg_num_mask = 0x1f; |
| dev->mii.supports_gmii = 1; |
| dev->mii.phy_id = SMSC75XX_INTERNAL_PHY_ID; |
| |
| /* reset phy and wait for reset to complete */ |
| smsc75xx_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET); |
| |
| do { |
| msleep(10); |
| bmcr = smsc75xx_mdio_read(dev->net, dev->mii.phy_id, MII_BMCR); |
| if (bmcr < 0) { |
| netdev_warn(dev->net, "Error reading MII_BMCR\n"); |
| return bmcr; |
| } |
| timeout++; |
| } while ((bmcr & BMCR_RESET) && (timeout < 100)); |
| |
| if (timeout >= 100) { |
| netdev_warn(dev->net, "timeout on PHY Reset\n"); |
| return -EIO; |
| } |
| |
| smsc75xx_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE, |
| ADVERTISE_ALL | ADVERTISE_CSMA | ADVERTISE_PAUSE_CAP | |
| ADVERTISE_PAUSE_ASYM); |
| smsc75xx_mdio_write(dev->net, dev->mii.phy_id, MII_CTRL1000, |
| ADVERTISE_1000FULL); |
| |
| /* read and write to clear phy interrupt status */ |
| ret = smsc75xx_mdio_read(dev->net, dev->mii.phy_id, PHY_INT_SRC); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Error reading PHY_INT_SRC\n"); |
| return ret; |
| } |
| |
| smsc75xx_mdio_write(dev->net, dev->mii.phy_id, PHY_INT_SRC, 0xffff); |
| |
| smsc75xx_mdio_write(dev->net, dev->mii.phy_id, PHY_INT_MASK, |
| PHY_INT_MASK_DEFAULT); |
| mii_nway_restart(&dev->mii); |
| |
| netif_dbg(dev, ifup, dev->net, "phy initialised successfully\n"); |
| return 0; |
| } |
| |
| static int smsc75xx_set_rx_max_frame_length(struct usbnet *dev, int size) |
| { |
| int ret = 0; |
| u32 buf; |
| bool rxenabled; |
| |
| ret = smsc75xx_read_reg(dev, MAC_RX, &buf); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Failed to read MAC_RX: %d\n", ret); |
| return ret; |
| } |
| |
| rxenabled = ((buf & MAC_RX_RXEN) != 0); |
| |
| if (rxenabled) { |
| buf &= ~MAC_RX_RXEN; |
| ret = smsc75xx_write_reg(dev, MAC_RX, buf); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Failed to write MAC_RX: %d\n", ret); |
| return ret; |
| } |
| } |
| |
| /* add 4 to size for FCS */ |
| buf &= ~MAC_RX_MAX_SIZE; |
| buf |= (((size + 4) << MAC_RX_MAX_SIZE_SHIFT) & MAC_RX_MAX_SIZE); |
| |
| ret = smsc75xx_write_reg(dev, MAC_RX, buf); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Failed to write MAC_RX: %d\n", ret); |
| return ret; |
| } |
| |
| if (rxenabled) { |
| buf |= MAC_RX_RXEN; |
| ret = smsc75xx_write_reg(dev, MAC_RX, buf); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Failed to write MAC_RX: %d\n", ret); |
| return ret; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int smsc75xx_change_mtu(struct net_device *netdev, int new_mtu) |
| { |
| struct usbnet *dev = netdev_priv(netdev); |
| |
| int ret = smsc75xx_set_rx_max_frame_length(dev, new_mtu); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Failed to set mac rx frame length\n"); |
| return ret; |
| } |
| |
| return usbnet_change_mtu(netdev, new_mtu); |
| } |
| |
| /* Enable or disable Rx checksum offload engine */ |
| static int smsc75xx_set_features(struct net_device *netdev, |
| netdev_features_t features) |
| { |
| struct usbnet *dev = netdev_priv(netdev); |
| struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]); |
| unsigned long flags; |
| int ret; |
| |
| spin_lock_irqsave(&pdata->rfe_ctl_lock, flags); |
| |
| if (features & NETIF_F_RXCSUM) |
| pdata->rfe_ctl |= RFE_CTL_TCPUDP_CKM | RFE_CTL_IP_CKM; |
| else |
| pdata->rfe_ctl &= ~(RFE_CTL_TCPUDP_CKM | RFE_CTL_IP_CKM); |
| |
| spin_unlock_irqrestore(&pdata->rfe_ctl_lock, flags); |
| /* it's racing here! */ |
| |
| ret = smsc75xx_write_reg(dev, RFE_CTL, pdata->rfe_ctl); |
| if (ret < 0) |
| netdev_warn(dev->net, "Error writing RFE_CTL\n"); |
| |
| return ret; |
| } |
| |
| static int smsc75xx_wait_ready(struct usbnet *dev, int in_pm) |
| { |
| int timeout = 0; |
| |
| do { |
| u32 buf; |
| int ret; |
| |
| ret = __smsc75xx_read_reg(dev, PMT_CTL, &buf, in_pm); |
| |
| if (ret < 0) { |
| netdev_warn(dev->net, "Failed to read PMT_CTL: %d\n", ret); |
| return ret; |
| } |
| |
| if (buf & PMT_CTL_DEV_RDY) |
| return 0; |
| |
| msleep(10); |
| timeout++; |
| } while (timeout < 100); |
| |
| netdev_warn(dev->net, "timeout waiting for device ready\n"); |
| return -EIO; |
| } |
| |
| static int smsc75xx_reset(struct usbnet *dev) |
| { |
| struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]); |
| u32 buf; |
| int ret = 0, timeout; |
| |
| netif_dbg(dev, ifup, dev->net, "entering smsc75xx_reset\n"); |
| |
| ret = smsc75xx_wait_ready(dev, 0); |
| if (ret < 0) { |
| netdev_warn(dev->net, "device not ready in smsc75xx_reset\n"); |
| return ret; |
| } |
| |
| ret = smsc75xx_read_reg(dev, HW_CFG, &buf); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Failed to read HW_CFG: %d\n", ret); |
| return ret; |
| } |
| |
| buf |= HW_CFG_LRST; |
| |
| ret = smsc75xx_write_reg(dev, HW_CFG, buf); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Failed to write HW_CFG: %d\n", ret); |
| return ret; |
| } |
| |
| timeout = 0; |
| do { |
| msleep(10); |
| ret = smsc75xx_read_reg(dev, HW_CFG, &buf); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Failed to read HW_CFG: %d\n", ret); |
| return ret; |
| } |
| timeout++; |
| } while ((buf & HW_CFG_LRST) && (timeout < 100)); |
| |
| if (timeout >= 100) { |
| netdev_warn(dev->net, "timeout on completion of Lite Reset\n"); |
| return -EIO; |
| } |
| |
| netif_dbg(dev, ifup, dev->net, "Lite reset complete, resetting PHY\n"); |
| |
| ret = smsc75xx_read_reg(dev, PMT_CTL, &buf); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Failed to read PMT_CTL: %d\n", ret); |
| return ret; |
| } |
| |
| buf |= PMT_CTL_PHY_RST; |
| |
| ret = smsc75xx_write_reg(dev, PMT_CTL, buf); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Failed to write PMT_CTL: %d\n", ret); |
| return ret; |
| } |
| |
| timeout = 0; |
| do { |
| msleep(10); |
| ret = smsc75xx_read_reg(dev, PMT_CTL, &buf); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Failed to read PMT_CTL: %d\n", ret); |
| return ret; |
| } |
| timeout++; |
| } while ((buf & PMT_CTL_PHY_RST) && (timeout < 100)); |
| |
| if (timeout >= 100) { |
| netdev_warn(dev->net, "timeout waiting for PHY Reset\n"); |
| return -EIO; |
| } |
| |
| netif_dbg(dev, ifup, dev->net, "PHY reset complete\n"); |
| |
| ret = smsc75xx_set_mac_address(dev); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Failed to set mac address\n"); |
| return ret; |
| } |
| |
| netif_dbg(dev, ifup, dev->net, "MAC Address: %pM\n", |
| dev->net->dev_addr); |
| |
| ret = smsc75xx_read_reg(dev, HW_CFG, &buf); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Failed to read HW_CFG: %d\n", ret); |
| return ret; |
| } |
| |
| netif_dbg(dev, ifup, dev->net, "Read Value from HW_CFG : 0x%08x\n", |
| buf); |
| |
| buf |= HW_CFG_BIR; |
| |
| ret = smsc75xx_write_reg(dev, HW_CFG, buf); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Failed to write HW_CFG: %d\n", ret); |
| return ret; |
| } |
| |
| ret = smsc75xx_read_reg(dev, HW_CFG, &buf); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Failed to read HW_CFG: %d\n", ret); |
| return ret; |
| } |
| |
| netif_dbg(dev, ifup, dev->net, "Read Value from HW_CFG after writing HW_CFG_BIR: 0x%08x\n", |
| buf); |
| |
| if (!turbo_mode) { |
| buf = 0; |
| dev->rx_urb_size = MAX_SINGLE_PACKET_SIZE; |
| } else if (dev->udev->speed == USB_SPEED_HIGH) { |
| buf = DEFAULT_HS_BURST_CAP_SIZE / HS_USB_PKT_SIZE; |
| dev->rx_urb_size = DEFAULT_HS_BURST_CAP_SIZE; |
| } else { |
| buf = DEFAULT_FS_BURST_CAP_SIZE / FS_USB_PKT_SIZE; |
| dev->rx_urb_size = DEFAULT_FS_BURST_CAP_SIZE; |
| } |
| |
| netif_dbg(dev, ifup, dev->net, "rx_urb_size=%ld\n", |
| (ulong)dev->rx_urb_size); |
| |
| ret = smsc75xx_write_reg(dev, BURST_CAP, buf); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Failed to write BURST_CAP: %d\n", ret); |
| return ret; |
| } |
| |
| ret = smsc75xx_read_reg(dev, BURST_CAP, &buf); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Failed to read BURST_CAP: %d\n", ret); |
| return ret; |
| } |
| |
| netif_dbg(dev, ifup, dev->net, |
| "Read Value from BURST_CAP after writing: 0x%08x\n", buf); |
| |
| ret = smsc75xx_write_reg(dev, BULK_IN_DLY, DEFAULT_BULK_IN_DELAY); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Failed to write BULK_IN_DLY: %d\n", ret); |
| return ret; |
| } |
| |
| ret = smsc75xx_read_reg(dev, BULK_IN_DLY, &buf); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Failed to read BULK_IN_DLY: %d\n", ret); |
| return ret; |
| } |
| |
| netif_dbg(dev, ifup, dev->net, |
| "Read Value from BULK_IN_DLY after writing: 0x%08x\n", buf); |
| |
| if (turbo_mode) { |
| ret = smsc75xx_read_reg(dev, HW_CFG, &buf); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Failed to read HW_CFG: %d\n", ret); |
| return ret; |
| } |
| |
| netif_dbg(dev, ifup, dev->net, "HW_CFG: 0x%08x\n", buf); |
| |
| buf |= (HW_CFG_MEF | HW_CFG_BCE); |
| |
| ret = smsc75xx_write_reg(dev, HW_CFG, buf); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Failed to write HW_CFG: %d\n", ret); |
| return ret; |
| } |
| |
| ret = smsc75xx_read_reg(dev, HW_CFG, &buf); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Failed to read HW_CFG: %d\n", ret); |
| return ret; |
| } |
| |
| netif_dbg(dev, ifup, dev->net, "HW_CFG: 0x%08x\n", buf); |
| } |
| |
| /* set FIFO sizes */ |
| buf = (MAX_RX_FIFO_SIZE - 512) / 512; |
| ret = smsc75xx_write_reg(dev, FCT_RX_FIFO_END, buf); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Failed to write FCT_RX_FIFO_END: %d\n", ret); |
| return ret; |
| } |
| |
| netif_dbg(dev, ifup, dev->net, "FCT_RX_FIFO_END set to 0x%08x\n", buf); |
| |
| buf = (MAX_TX_FIFO_SIZE - 512) / 512; |
| ret = smsc75xx_write_reg(dev, FCT_TX_FIFO_END, buf); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Failed to write FCT_TX_FIFO_END: %d\n", ret); |
| return ret; |
| } |
| |
| netif_dbg(dev, ifup, dev->net, "FCT_TX_FIFO_END set to 0x%08x\n", buf); |
| |
| ret = smsc75xx_write_reg(dev, INT_STS, INT_STS_CLEAR_ALL); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Failed to write INT_STS: %d\n", ret); |
| return ret; |
| } |
| |
| ret = smsc75xx_read_reg(dev, ID_REV, &buf); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Failed to read ID_REV: %d\n", ret); |
| return ret; |
| } |
| |
| netif_dbg(dev, ifup, dev->net, "ID_REV = 0x%08x\n", buf); |
| |
| ret = smsc75xx_read_reg(dev, E2P_CMD, &buf); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Failed to read E2P_CMD: %d\n", ret); |
| return ret; |
| } |
| |
| /* only set default GPIO/LED settings if no EEPROM is detected */ |
| if (!(buf & E2P_CMD_LOADED)) { |
| ret = smsc75xx_read_reg(dev, LED_GPIO_CFG, &buf); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Failed to read LED_GPIO_CFG: %d\n", ret); |
| return ret; |
| } |
| |
| buf &= ~(LED_GPIO_CFG_LED2_FUN_SEL | LED_GPIO_CFG_LED10_FUN_SEL); |
| buf |= LED_GPIO_CFG_LEDGPIO_EN | LED_GPIO_CFG_LED2_FUN_SEL; |
| |
| ret = smsc75xx_write_reg(dev, LED_GPIO_CFG, buf); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Failed to write LED_GPIO_CFG: %d\n", ret); |
| return ret; |
| } |
| } |
| |
| ret = smsc75xx_write_reg(dev, FLOW, 0); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Failed to write FLOW: %d\n", ret); |
| return ret; |
| } |
| |
| ret = smsc75xx_write_reg(dev, FCT_FLOW, 0); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Failed to write FCT_FLOW: %d\n", ret); |
| return ret; |
| } |
| |
| /* Don't need rfe_ctl_lock during initialisation */ |
| ret = smsc75xx_read_reg(dev, RFE_CTL, &pdata->rfe_ctl); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Failed to read RFE_CTL: %d\n", ret); |
| return ret; |
| } |
| |
| pdata->rfe_ctl |= RFE_CTL_AB | RFE_CTL_DPF; |
| |
| ret = smsc75xx_write_reg(dev, RFE_CTL, pdata->rfe_ctl); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Failed to write RFE_CTL: %d\n", ret); |
| return ret; |
| } |
| |
| ret = smsc75xx_read_reg(dev, RFE_CTL, &pdata->rfe_ctl); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Failed to read RFE_CTL: %d\n", ret); |
| return ret; |
| } |
| |
| netif_dbg(dev, ifup, dev->net, "RFE_CTL set to 0x%08x\n", |
| pdata->rfe_ctl); |
| |
| /* Enable or disable checksum offload engines */ |
| smsc75xx_set_features(dev->net, dev->net->features); |
| |
| smsc75xx_set_multicast(dev->net); |
| |
| ret = smsc75xx_phy_initialize(dev); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Failed to initialize PHY: %d\n", ret); |
| return ret; |
| } |
| |
| ret = smsc75xx_read_reg(dev, INT_EP_CTL, &buf); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Failed to read INT_EP_CTL: %d\n", ret); |
| return ret; |
| } |
| |
| /* enable PHY interrupts */ |
| buf |= INT_ENP_PHY_INT; |
| |
| ret = smsc75xx_write_reg(dev, INT_EP_CTL, buf); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Failed to write INT_EP_CTL: %d\n", ret); |
| return ret; |
| } |
| |
| /* allow mac to detect speed and duplex from phy */ |
| ret = smsc75xx_read_reg(dev, MAC_CR, &buf); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Failed to read MAC_CR: %d\n", ret); |
| return ret; |
| } |
| |
| buf |= (MAC_CR_ADD | MAC_CR_ASD); |
| ret = smsc75xx_write_reg(dev, MAC_CR, buf); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Failed to write MAC_CR: %d\n", ret); |
| return ret; |
| } |
| |
| ret = smsc75xx_read_reg(dev, MAC_TX, &buf); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Failed to read MAC_TX: %d\n", ret); |
| return ret; |
| } |
| |
| buf |= MAC_TX_TXEN; |
| |
| ret = smsc75xx_write_reg(dev, MAC_TX, buf); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Failed to write MAC_TX: %d\n", ret); |
| return ret; |
| } |
| |
| netif_dbg(dev, ifup, dev->net, "MAC_TX set to 0x%08x\n", buf); |
| |
| ret = smsc75xx_read_reg(dev, FCT_TX_CTL, &buf); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Failed to read FCT_TX_CTL: %d\n", ret); |
| return ret; |
| } |
| |
| buf |= FCT_TX_CTL_EN; |
| |
| ret = smsc75xx_write_reg(dev, FCT_TX_CTL, buf); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Failed to write FCT_TX_CTL: %d\n", ret); |
| return ret; |
| } |
| |
| netif_dbg(dev, ifup, dev->net, "FCT_TX_CTL set to 0x%08x\n", buf); |
| |
| ret = smsc75xx_set_rx_max_frame_length(dev, 1514); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Failed to set max rx frame length\n"); |
| return ret; |
| } |
| |
| ret = smsc75xx_read_reg(dev, MAC_RX, &buf); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Failed to read MAC_RX: %d\n", ret); |
| return ret; |
| } |
| |
| buf |= MAC_RX_RXEN; |
| |
| ret = smsc75xx_write_reg(dev, MAC_RX, buf); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Failed to write MAC_RX: %d\n", ret); |
| return ret; |
| } |
| |
| netif_dbg(dev, ifup, dev->net, "MAC_RX set to 0x%08x\n", buf); |
| |
| ret = smsc75xx_read_reg(dev, FCT_RX_CTL, &buf); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Failed to read FCT_RX_CTL: %d\n", ret); |
| return ret; |
| } |
| |
| buf |= FCT_RX_CTL_EN; |
| |
| ret = smsc75xx_write_reg(dev, FCT_RX_CTL, buf); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Failed to write FCT_RX_CTL: %d\n", ret); |
| return ret; |
| } |
| |
| netif_dbg(dev, ifup, dev->net, "FCT_RX_CTL set to 0x%08x\n", buf); |
| |
| netif_dbg(dev, ifup, dev->net, "smsc75xx_reset, return 0\n"); |
| return 0; |
| } |
| |
| static const struct net_device_ops smsc75xx_netdev_ops = { |
| .ndo_open = usbnet_open, |
| .ndo_stop = usbnet_stop, |
| .ndo_start_xmit = usbnet_start_xmit, |
| .ndo_tx_timeout = usbnet_tx_timeout, |
| .ndo_change_mtu = smsc75xx_change_mtu, |
| .ndo_set_mac_address = eth_mac_addr, |
| .ndo_validate_addr = eth_validate_addr, |
| .ndo_do_ioctl = smsc75xx_ioctl, |
| .ndo_set_rx_mode = smsc75xx_set_multicast, |
| .ndo_set_features = smsc75xx_set_features, |
| }; |
| |
| static int smsc75xx_bind(struct usbnet *dev, struct usb_interface *intf) |
| { |
| struct smsc75xx_priv *pdata = NULL; |
| int ret; |
| |
| printk(KERN_INFO SMSC_CHIPNAME " v" SMSC_DRIVER_VERSION "\n"); |
| |
| ret = usbnet_get_endpoints(dev, intf); |
| if (ret < 0) { |
| netdev_warn(dev->net, "usbnet_get_endpoints failed: %d\n", ret); |
| return ret; |
| } |
| |
| dev->data[0] = (unsigned long)kzalloc(sizeof(struct smsc75xx_priv), |
| GFP_KERNEL); |
| |
| pdata = (struct smsc75xx_priv *)(dev->data[0]); |
| if (!pdata) |
| return -ENOMEM; |
| |
| pdata->dev = dev; |
| |
| spin_lock_init(&pdata->rfe_ctl_lock); |
| mutex_init(&pdata->dataport_mutex); |
| |
| INIT_WORK(&pdata->set_multicast, smsc75xx_deferred_multicast_write); |
| |
| if (DEFAULT_TX_CSUM_ENABLE) { |
| dev->net->features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM; |
| if (DEFAULT_TSO_ENABLE) |
| dev->net->features |= NETIF_F_SG | |
| NETIF_F_TSO | NETIF_F_TSO6; |
| } |
| if (DEFAULT_RX_CSUM_ENABLE) |
| dev->net->features |= NETIF_F_RXCSUM; |
| |
| dev->net->hw_features = NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM | |
| NETIF_F_SG | NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_RXCSUM; |
| |
| ret = smsc75xx_wait_ready(dev, 0); |
| if (ret < 0) { |
| netdev_warn(dev->net, "device not ready in smsc75xx_bind\n"); |
| return ret; |
| } |
| |
| smsc75xx_init_mac_address(dev); |
| |
| /* Init all registers */ |
| ret = smsc75xx_reset(dev); |
| if (ret < 0) { |
| netdev_warn(dev->net, "smsc75xx_reset error %d\n", ret); |
| return ret; |
| } |
| |
| dev->net->netdev_ops = &smsc75xx_netdev_ops; |
| dev->net->ethtool_ops = &smsc75xx_ethtool_ops; |
| dev->net->flags |= IFF_MULTICAST; |
| dev->net->hard_header_len += SMSC75XX_TX_OVERHEAD; |
| dev->hard_mtu = dev->net->mtu + dev->net->hard_header_len; |
| return 0; |
| } |
| |
| static void smsc75xx_unbind(struct usbnet *dev, struct usb_interface *intf) |
| { |
| struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]); |
| if (pdata) { |
| netif_dbg(dev, ifdown, dev->net, "free pdata\n"); |
| kfree(pdata); |
| pdata = NULL; |
| dev->data[0] = 0; |
| } |
| } |
| |
| static u16 smsc_crc(const u8 *buffer, size_t len) |
| { |
| return bitrev16(crc16(0xFFFF, buffer, len)); |
| } |
| |
| static int smsc75xx_write_wuff(struct usbnet *dev, int filter, u32 wuf_cfg, |
| u32 wuf_mask1) |
| { |
| int cfg_base = WUF_CFGX + filter * 4; |
| int mask_base = WUF_MASKX + filter * 16; |
| int ret; |
| |
| ret = smsc75xx_write_reg(dev, cfg_base, wuf_cfg); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Error writing WUF_CFGX\n"); |
| return ret; |
| } |
| |
| ret = smsc75xx_write_reg(dev, mask_base, wuf_mask1); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Error writing WUF_MASKX\n"); |
| return ret; |
| } |
| |
| ret = smsc75xx_write_reg(dev, mask_base + 4, 0); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Error writing WUF_MASKX\n"); |
| return ret; |
| } |
| |
| ret = smsc75xx_write_reg(dev, mask_base + 8, 0); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Error writing WUF_MASKX\n"); |
| return ret; |
| } |
| |
| ret = smsc75xx_write_reg(dev, mask_base + 12, 0); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Error writing WUF_MASKX\n"); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int smsc75xx_enter_suspend0(struct usbnet *dev) |
| { |
| struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]); |
| u32 val; |
| int ret; |
| |
| ret = smsc75xx_read_reg_nopm(dev, PMT_CTL, &val); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Error reading PMT_CTL\n"); |
| return ret; |
| } |
| |
| val &= (~(PMT_CTL_SUS_MODE | PMT_CTL_PHY_RST)); |
| val |= PMT_CTL_SUS_MODE_0 | PMT_CTL_WOL_EN | PMT_CTL_WUPS; |
| |
| ret = smsc75xx_write_reg_nopm(dev, PMT_CTL, val); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Error writing PMT_CTL\n"); |
| return ret; |
| } |
| |
| pdata->suspend_flags |= SUSPEND_SUSPEND0; |
| |
| return 0; |
| } |
| |
| static int smsc75xx_enter_suspend1(struct usbnet *dev) |
| { |
| struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]); |
| u32 val; |
| int ret; |
| |
| ret = smsc75xx_read_reg_nopm(dev, PMT_CTL, &val); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Error reading PMT_CTL\n"); |
| return ret; |
| } |
| |
| val &= ~(PMT_CTL_SUS_MODE | PMT_CTL_WUPS | PMT_CTL_PHY_RST); |
| val |= PMT_CTL_SUS_MODE_1; |
| |
| ret = smsc75xx_write_reg_nopm(dev, PMT_CTL, val); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Error writing PMT_CTL\n"); |
| return ret; |
| } |
| |
| /* clear wol status, enable energy detection */ |
| val &= ~PMT_CTL_WUPS; |
| val |= (PMT_CTL_WUPS_ED | PMT_CTL_ED_EN); |
| |
| ret = smsc75xx_write_reg_nopm(dev, PMT_CTL, val); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Error writing PMT_CTL\n"); |
| return ret; |
| } |
| |
| pdata->suspend_flags |= SUSPEND_SUSPEND1; |
| |
| return 0; |
| } |
| |
| static int smsc75xx_enter_suspend2(struct usbnet *dev) |
| { |
| struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]); |
| u32 val; |
| int ret; |
| |
| ret = smsc75xx_read_reg_nopm(dev, PMT_CTL, &val); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Error reading PMT_CTL\n"); |
| return ret; |
| } |
| |
| val &= ~(PMT_CTL_SUS_MODE | PMT_CTL_WUPS | PMT_CTL_PHY_RST); |
| val |= PMT_CTL_SUS_MODE_2; |
| |
| ret = smsc75xx_write_reg_nopm(dev, PMT_CTL, val); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Error writing PMT_CTL\n"); |
| return ret; |
| } |
| |
| pdata->suspend_flags |= SUSPEND_SUSPEND2; |
| |
| return 0; |
| } |
| |
| static int smsc75xx_enter_suspend3(struct usbnet *dev) |
| { |
| struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]); |
| u32 val; |
| int ret; |
| |
| ret = smsc75xx_read_reg_nopm(dev, FCT_RX_CTL, &val); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Error reading FCT_RX_CTL\n"); |
| return ret; |
| } |
| |
| if (val & FCT_RX_CTL_RXUSED) { |
| netdev_dbg(dev->net, "rx fifo not empty in autosuspend\n"); |
| return -EBUSY; |
| } |
| |
| ret = smsc75xx_read_reg_nopm(dev, PMT_CTL, &val); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Error reading PMT_CTL\n"); |
| return ret; |
| } |
| |
| val &= ~(PMT_CTL_SUS_MODE | PMT_CTL_WUPS | PMT_CTL_PHY_RST); |
| val |= PMT_CTL_SUS_MODE_3 | PMT_CTL_RES_CLR_WKP_EN; |
| |
| ret = smsc75xx_write_reg_nopm(dev, PMT_CTL, val); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Error writing PMT_CTL\n"); |
| return ret; |
| } |
| |
| /* clear wol status */ |
| val &= ~PMT_CTL_WUPS; |
| val |= PMT_CTL_WUPS_WOL; |
| |
| ret = smsc75xx_write_reg_nopm(dev, PMT_CTL, val); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Error writing PMT_CTL\n"); |
| return ret; |
| } |
| |
| pdata->suspend_flags |= SUSPEND_SUSPEND3; |
| |
| return 0; |
| } |
| |
| static int smsc75xx_enable_phy_wakeup_interrupts(struct usbnet *dev, u16 mask) |
| { |
| struct mii_if_info *mii = &dev->mii; |
| int ret; |
| |
| netdev_dbg(dev->net, "enabling PHY wakeup interrupts\n"); |
| |
| /* read to clear */ |
| ret = smsc75xx_mdio_read_nopm(dev->net, mii->phy_id, PHY_INT_SRC); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Error reading PHY_INT_SRC\n"); |
| return ret; |
| } |
| |
| /* enable interrupt source */ |
| ret = smsc75xx_mdio_read_nopm(dev->net, mii->phy_id, PHY_INT_MASK); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Error reading PHY_INT_MASK\n"); |
| return ret; |
| } |
| |
| ret |= mask; |
| |
| smsc75xx_mdio_write_nopm(dev->net, mii->phy_id, PHY_INT_MASK, ret); |
| |
| return 0; |
| } |
| |
| static int smsc75xx_link_ok_nopm(struct usbnet *dev) |
| { |
| struct mii_if_info *mii = &dev->mii; |
| int ret; |
| |
| /* first, a dummy read, needed to latch some MII phys */ |
| ret = smsc75xx_mdio_read_nopm(dev->net, mii->phy_id, MII_BMSR); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Error reading MII_BMSR\n"); |
| return ret; |
| } |
| |
| ret = smsc75xx_mdio_read_nopm(dev->net, mii->phy_id, MII_BMSR); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Error reading MII_BMSR\n"); |
| return ret; |
| } |
| |
| return !!(ret & BMSR_LSTATUS); |
| } |
| |
| static int smsc75xx_autosuspend(struct usbnet *dev, u32 link_up) |
| { |
| int ret; |
| |
| if (!netif_running(dev->net)) { |
| /* interface is ifconfig down so fully power down hw */ |
| netdev_dbg(dev->net, "autosuspend entering SUSPEND2\n"); |
| return smsc75xx_enter_suspend2(dev); |
| } |
| |
| if (!link_up) { |
| /* link is down so enter EDPD mode */ |
| netdev_dbg(dev->net, "autosuspend entering SUSPEND1\n"); |
| |
| /* enable PHY wakeup events for if cable is attached */ |
| ret = smsc75xx_enable_phy_wakeup_interrupts(dev, |
| PHY_INT_MASK_ANEG_COMP); |
| if (ret < 0) { |
| netdev_warn(dev->net, "error enabling PHY wakeup ints\n"); |
| return ret; |
| } |
| |
| netdev_info(dev->net, "entering SUSPEND1 mode\n"); |
| return smsc75xx_enter_suspend1(dev); |
| } |
| |
| /* enable PHY wakeup events so we remote wakeup if cable is pulled */ |
| ret = smsc75xx_enable_phy_wakeup_interrupts(dev, |
| PHY_INT_MASK_LINK_DOWN); |
| if (ret < 0) { |
| netdev_warn(dev->net, "error enabling PHY wakeup ints\n"); |
| return ret; |
| } |
| |
| netdev_dbg(dev->net, "autosuspend entering SUSPEND3\n"); |
| return smsc75xx_enter_suspend3(dev); |
| } |
| |
| static int smsc75xx_suspend(struct usb_interface *intf, pm_message_t message) |
| { |
| struct usbnet *dev = usb_get_intfdata(intf); |
| struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]); |
| u32 val, link_up; |
| int ret; |
| |
| ret = usbnet_suspend(intf, message); |
| if (ret < 0) { |
| netdev_warn(dev->net, "usbnet_suspend error\n"); |
| return ret; |
| } |
| |
| if (pdata->suspend_flags) { |
| netdev_warn(dev->net, "error during last resume\n"); |
| pdata->suspend_flags = 0; |
| } |
| |
| /* determine if link is up using only _nopm functions */ |
| link_up = smsc75xx_link_ok_nopm(dev); |
| |
| if (message.event == PM_EVENT_AUTO_SUSPEND) { |
| ret = smsc75xx_autosuspend(dev, link_up); |
| goto done; |
| } |
| |
| /* if we get this far we're not autosuspending */ |
| /* if no wol options set, or if link is down and we're not waking on |
| * PHY activity, enter lowest power SUSPEND2 mode |
| */ |
| if (!(pdata->wolopts & SUPPORTED_WAKE) || |
| !(link_up || (pdata->wolopts & WAKE_PHY))) { |
| netdev_info(dev->net, "entering SUSPEND2 mode\n"); |
| |
| /* disable energy detect (link up) & wake up events */ |
| ret = smsc75xx_read_reg_nopm(dev, WUCSR, &val); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Error reading WUCSR\n"); |
| goto done; |
| } |
| |
| val &= ~(WUCSR_MPEN | WUCSR_WUEN); |
| |
| ret = smsc75xx_write_reg_nopm(dev, WUCSR, val); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Error writing WUCSR\n"); |
| goto done; |
| } |
| |
| ret = smsc75xx_read_reg_nopm(dev, PMT_CTL, &val); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Error reading PMT_CTL\n"); |
| goto done; |
| } |
| |
| val &= ~(PMT_CTL_ED_EN | PMT_CTL_WOL_EN); |
| |
| ret = smsc75xx_write_reg_nopm(dev, PMT_CTL, val); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Error writing PMT_CTL\n"); |
| goto done; |
| } |
| |
| ret = smsc75xx_enter_suspend2(dev); |
| goto done; |
| } |
| |
| if (pdata->wolopts & WAKE_PHY) { |
| ret = smsc75xx_enable_phy_wakeup_interrupts(dev, |
| (PHY_INT_MASK_ANEG_COMP | PHY_INT_MASK_LINK_DOWN)); |
| if (ret < 0) { |
| netdev_warn(dev->net, "error enabling PHY wakeup ints\n"); |
| goto done; |
| } |
| |
| /* if link is down then configure EDPD and enter SUSPEND1, |
| * otherwise enter SUSPEND0 below |
| */ |
| if (!link_up) { |
| struct mii_if_info *mii = &dev->mii; |
| netdev_info(dev->net, "entering SUSPEND1 mode\n"); |
| |
| /* enable energy detect power-down mode */ |
| ret = smsc75xx_mdio_read_nopm(dev->net, mii->phy_id, |
| PHY_MODE_CTRL_STS); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Error reading PHY_MODE_CTRL_STS\n"); |
| goto done; |
| } |
| |
| ret |= MODE_CTRL_STS_EDPWRDOWN; |
| |
| smsc75xx_mdio_write_nopm(dev->net, mii->phy_id, |
| PHY_MODE_CTRL_STS, ret); |
| |
| /* enter SUSPEND1 mode */ |
| ret = smsc75xx_enter_suspend1(dev); |
| goto done; |
| } |
| } |
| |
| if (pdata->wolopts & (WAKE_MCAST | WAKE_ARP)) { |
| int i, filter = 0; |
| |
| /* disable all filters */ |
| for (i = 0; i < WUF_NUM; i++) { |
| ret = smsc75xx_write_reg_nopm(dev, WUF_CFGX + i * 4, 0); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Error writing WUF_CFGX\n"); |
| goto done; |
| } |
| } |
| |
| if (pdata->wolopts & WAKE_MCAST) { |
| const u8 mcast[] = {0x01, 0x00, 0x5E}; |
| netdev_info(dev->net, "enabling multicast detection\n"); |
| |
| val = WUF_CFGX_EN | WUF_CFGX_ATYPE_MULTICAST |
| | smsc_crc(mcast, 3); |
| ret = smsc75xx_write_wuff(dev, filter++, val, 0x0007); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Error writing wakeup filter\n"); |
| goto done; |
| } |
| } |
| |
| if (pdata->wolopts & WAKE_ARP) { |
| const u8 arp[] = {0x08, 0x06}; |
| netdev_info(dev->net, "enabling ARP detection\n"); |
| |
| val = WUF_CFGX_EN | WUF_CFGX_ATYPE_ALL | (0x0C << 16) |
| | smsc_crc(arp, 2); |
| ret = smsc75xx_write_wuff(dev, filter++, val, 0x0003); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Error writing wakeup filter\n"); |
| goto done; |
| } |
| } |
| |
| /* clear any pending pattern match packet status */ |
| ret = smsc75xx_read_reg_nopm(dev, WUCSR, &val); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Error reading WUCSR\n"); |
| goto done; |
| } |
| |
| val |= WUCSR_WUFR; |
| |
| ret = smsc75xx_write_reg_nopm(dev, WUCSR, val); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Error writing WUCSR\n"); |
| goto done; |
| } |
| |
| netdev_info(dev->net, "enabling packet match detection\n"); |
| ret = smsc75xx_read_reg_nopm(dev, WUCSR, &val); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Error reading WUCSR\n"); |
| goto done; |
| } |
| |
| val |= WUCSR_WUEN; |
| |
| ret = smsc75xx_write_reg_nopm(dev, WUCSR, val); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Error writing WUCSR\n"); |
| goto done; |
| } |
| } else { |
| netdev_info(dev->net, "disabling packet match detection\n"); |
| ret = smsc75xx_read_reg_nopm(dev, WUCSR, &val); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Error reading WUCSR\n"); |
| goto done; |
| } |
| |
| val &= ~WUCSR_WUEN; |
| |
| ret = smsc75xx_write_reg_nopm(dev, WUCSR, val); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Error writing WUCSR\n"); |
| goto done; |
| } |
| } |
| |
| /* disable magic, bcast & unicast wakeup sources */ |
| ret = smsc75xx_read_reg_nopm(dev, WUCSR, &val); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Error reading WUCSR\n"); |
| goto done; |
| } |
| |
| val &= ~(WUCSR_MPEN | WUCSR_BCST_EN | WUCSR_PFDA_EN); |
| |
| ret = smsc75xx_write_reg_nopm(dev, WUCSR, val); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Error writing WUCSR\n"); |
| goto done; |
| } |
| |
| if (pdata->wolopts & WAKE_PHY) { |
| netdev_info(dev->net, "enabling PHY wakeup\n"); |
| |
| ret = smsc75xx_read_reg_nopm(dev, PMT_CTL, &val); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Error reading PMT_CTL\n"); |
| goto done; |
| } |
| |
| /* clear wol status, enable energy detection */ |
| val &= ~PMT_CTL_WUPS; |
| val |= (PMT_CTL_WUPS_ED | PMT_CTL_ED_EN); |
| |
| ret = smsc75xx_write_reg_nopm(dev, PMT_CTL, val); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Error writing PMT_CTL\n"); |
| goto done; |
| } |
| } |
| |
| if (pdata->wolopts & WAKE_MAGIC) { |
| netdev_info(dev->net, "enabling magic packet wakeup\n"); |
| ret = smsc75xx_read_reg_nopm(dev, WUCSR, &val); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Error reading WUCSR\n"); |
| goto done; |
| } |
| |
| /* clear any pending magic packet status */ |
| val |= WUCSR_MPR | WUCSR_MPEN; |
| |
| ret = smsc75xx_write_reg_nopm(dev, WUCSR, val); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Error writing WUCSR\n"); |
| goto done; |
| } |
| } |
| |
| if (pdata->wolopts & WAKE_BCAST) { |
| netdev_info(dev->net, "enabling broadcast detection\n"); |
| ret = smsc75xx_read_reg_nopm(dev, WUCSR, &val); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Error reading WUCSR\n"); |
| goto done; |
| } |
| |
| val |= WUCSR_BCAST_FR | WUCSR_BCST_EN; |
| |
| ret = smsc75xx_write_reg_nopm(dev, WUCSR, val); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Error writing WUCSR\n"); |
| goto done; |
| } |
| } |
| |
| if (pdata->wolopts & WAKE_UCAST) { |
| netdev_info(dev->net, "enabling unicast detection\n"); |
| ret = smsc75xx_read_reg_nopm(dev, WUCSR, &val); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Error reading WUCSR\n"); |
| goto done; |
| } |
| |
| val |= WUCSR_WUFR | WUCSR_PFDA_EN; |
| |
| ret = smsc75xx_write_reg_nopm(dev, WUCSR, val); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Error writing WUCSR\n"); |
| goto done; |
| } |
| } |
| |
| /* enable receiver to enable frame reception */ |
| ret = smsc75xx_read_reg_nopm(dev, MAC_RX, &val); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Failed to read MAC_RX: %d\n", ret); |
| goto done; |
| } |
| |
| val |= MAC_RX_RXEN; |
| |
| ret = smsc75xx_write_reg_nopm(dev, MAC_RX, val); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Failed to write MAC_RX: %d\n", ret); |
| goto done; |
| } |
| |
| /* some wol options are enabled, so enter SUSPEND0 */ |
| netdev_info(dev->net, "entering SUSPEND0 mode\n"); |
| ret = smsc75xx_enter_suspend0(dev); |
| |
| done: |
| if (ret) |
| usbnet_resume(intf); |
| return ret; |
| } |
| |
| static int smsc75xx_resume(struct usb_interface *intf) |
| { |
| struct usbnet *dev = usb_get_intfdata(intf); |
| struct smsc75xx_priv *pdata = (struct smsc75xx_priv *)(dev->data[0]); |
| u8 suspend_flags = pdata->suspend_flags; |
| int ret; |
| u32 val; |
| |
| netdev_dbg(dev->net, "resume suspend_flags=0x%02x\n", suspend_flags); |
| |
| /* do this first to ensure it's cleared even in error case */ |
| pdata->suspend_flags = 0; |
| |
| if (suspend_flags & SUSPEND_ALLMODES) { |
| /* Disable wakeup sources */ |
| ret = smsc75xx_read_reg_nopm(dev, WUCSR, &val); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Error reading WUCSR\n"); |
| return ret; |
| } |
| |
| val &= ~(WUCSR_WUEN | WUCSR_MPEN | WUCSR_PFDA_EN |
| | WUCSR_BCST_EN); |
| |
| ret = smsc75xx_write_reg_nopm(dev, WUCSR, val); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Error writing WUCSR\n"); |
| return ret; |
| } |
| |
| /* clear wake-up status */ |
| ret = smsc75xx_read_reg_nopm(dev, PMT_CTL, &val); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Error reading PMT_CTL\n"); |
| return ret; |
| } |
| |
| val &= ~PMT_CTL_WOL_EN; |
| val |= PMT_CTL_WUPS; |
| |
| ret = smsc75xx_write_reg_nopm(dev, PMT_CTL, val); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Error writing PMT_CTL\n"); |
| return ret; |
| } |
| } |
| |
| if (suspend_flags & SUSPEND_SUSPEND2) { |
| netdev_info(dev->net, "resuming from SUSPEND2\n"); |
| |
| ret = smsc75xx_read_reg_nopm(dev, PMT_CTL, &val); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Error reading PMT_CTL\n"); |
| return ret; |
| } |
| |
| val |= PMT_CTL_PHY_PWRUP; |
| |
| ret = smsc75xx_write_reg_nopm(dev, PMT_CTL, val); |
| if (ret < 0) { |
| netdev_warn(dev->net, "Error writing PMT_CTL\n"); |
| return ret; |
| } |
| } |
| |
| ret = smsc75xx_wait_ready(dev, 1); |
| if (ret < 0) { |
| netdev_warn(dev->net, "device not ready in smsc75xx_resume\n"); |
| return ret; |
| } |
| |
| return usbnet_resume(intf); |
| } |
| |
| static void smsc75xx_rx_csum_offload(struct usbnet *dev, struct sk_buff *skb, |
| u32 rx_cmd_a, u32 rx_cmd_b) |
| { |
| if (!(dev->net->features & NETIF_F_RXCSUM) || |
| unlikely(rx_cmd_a & RX_CMD_A_LCSM)) { |
| skb->ip_summed = CHECKSUM_NONE; |
| } else { |
| skb->csum = ntohs((u16)(rx_cmd_b >> RX_CMD_B_CSUM_SHIFT)); |
| skb->ip_summed = CHECKSUM_COMPLETE; |
| } |
| } |
| |
| static int smsc75xx_rx_fixup(struct usbnet *dev, struct sk_buff *skb) |
| { |
| while (skb->len > 0) { |
| u32 rx_cmd_a, rx_cmd_b, align_count, size; |
| struct sk_buff *ax_skb; |
| unsigned char *packet; |
| |
| memcpy(&rx_cmd_a, skb->data, sizeof(rx_cmd_a)); |
| le32_to_cpus(&rx_cmd_a); |
| skb_pull(skb, 4); |
| |
| memcpy(&rx_cmd_b, skb->data, sizeof(rx_cmd_b)); |
| le32_to_cpus(&rx_cmd_b); |
| skb_pull(skb, 4 + RXW_PADDING); |
| |
| packet = skb->data; |
| |
| /* get the packet length */ |
| size = (rx_cmd_a & RX_CMD_A_LEN) - RXW_PADDING; |
| align_count = (4 - ((size + RXW_PADDING) % 4)) % 4; |
| |
| if (unlikely(rx_cmd_a & RX_CMD_A_RED)) { |
| netif_dbg(dev, rx_err, dev->net, |
| "Error rx_cmd_a=0x%08x\n", rx_cmd_a); |
| dev->net->stats.rx_errors++; |
| dev->net->stats.rx_dropped++; |
| |
| if (rx_cmd_a & RX_CMD_A_FCS) |
| dev->net->stats.rx_crc_errors++; |
| else if (rx_cmd_a & (RX_CMD_A_LONG | RX_CMD_A_RUNT)) |
| dev->net->stats.rx_frame_errors++; |
| } else { |
| /* ETH_FRAME_LEN + 4(CRC) + 2(COE) + 4(Vlan) */ |
| if (unlikely(size > (ETH_FRAME_LEN + 12))) { |
| netif_dbg(dev, rx_err, dev->net, |
| "size err rx_cmd_a=0x%08x\n", |
| rx_cmd_a); |
| return 0; |
| } |
| |
| /* last frame in this batch */ |
| if (skb->len == size) { |
| smsc75xx_rx_csum_offload(dev, skb, rx_cmd_a, |
| rx_cmd_b); |
| |
| skb_trim(skb, skb->len - 4); /* remove fcs */ |
| skb->truesize = size + sizeof(struct sk_buff); |
| |
| return 1; |
| } |
| |
| ax_skb = skb_clone(skb, GFP_ATOMIC); |
| if (unlikely(!ax_skb)) { |
| netdev_warn(dev->net, "Error allocating skb\n"); |
| return 0; |
| } |
| |
| ax_skb->len = size; |
| ax_skb->data = packet; |
| skb_set_tail_pointer(ax_skb, size); |
| |
| smsc75xx_rx_csum_offload(dev, ax_skb, rx_cmd_a, |
| rx_cmd_b); |
| |
| skb_trim(ax_skb, ax_skb->len - 4); /* remove fcs */ |
| ax_skb->truesize = size + sizeof(struct sk_buff); |
| |
| usbnet_skb_return(dev, ax_skb); |
| } |
| |
| skb_pull(skb, size); |
| |
| /* padding bytes before the next frame starts */ |
| if (skb->len) |
| skb_pull(skb, align_count); |
| } |
| |
| if (unlikely(skb->len < 0)) { |
| netdev_warn(dev->net, "invalid rx length<0 %d\n", skb->len); |
| return 0; |
| } |
| |
| return 1; |
| } |
| |
| static struct sk_buff *smsc75xx_tx_fixup(struct usbnet *dev, |
| struct sk_buff *skb, gfp_t flags) |
| { |
| u32 tx_cmd_a, tx_cmd_b; |
| |
| skb_linearize(skb); |
| |
| if (skb_headroom(skb) < SMSC75XX_TX_OVERHEAD) { |
| struct sk_buff *skb2 = |
| skb_copy_expand(skb, SMSC75XX_TX_OVERHEAD, 0, flags); |
| dev_kfree_skb_any(skb); |
| skb = skb2; |
| if (!skb) |
| return NULL; |
| } |
| |
| tx_cmd_a = (u32)(skb->len & TX_CMD_A_LEN) | TX_CMD_A_FCS; |
| |
| if (skb->ip_summed == CHECKSUM_PARTIAL) |
| tx_cmd_a |= TX_CMD_A_IPE | TX_CMD_A_TPE; |
| |
| if (skb_is_gso(skb)) { |
| u16 mss = max(skb_shinfo(skb)->gso_size, TX_MSS_MIN); |
| tx_cmd_b = (mss << TX_CMD_B_MSS_SHIFT) & TX_CMD_B_MSS; |
| |
| tx_cmd_a |= TX_CMD_A_LSO; |
| } else { |
| tx_cmd_b = 0; |
| } |
| |
| skb_push(skb, 4); |
| cpu_to_le32s(&tx_cmd_b); |
| memcpy(skb->data, &tx_cmd_b, 4); |
| |
| skb_push(skb, 4); |
| cpu_to_le32s(&tx_cmd_a); |
| memcpy(skb->data, &tx_cmd_a, 4); |
| |
| return skb; |
| } |
| |
| static int smsc75xx_manage_power(struct usbnet *dev, int on) |
| { |
| dev->intf->needs_remote_wakeup = on; |
| return 0; |
| } |
| |
| static const struct driver_info smsc75xx_info = { |
| .description = "smsc75xx USB 2.0 Gigabit Ethernet", |
| .bind = smsc75xx_bind, |
| .unbind = smsc75xx_unbind, |
| .link_reset = smsc75xx_link_reset, |
| .reset = smsc75xx_reset, |
| .rx_fixup = smsc75xx_rx_fixup, |
| .tx_fixup = smsc75xx_tx_fixup, |
| .status = smsc75xx_status, |
| .manage_power = smsc75xx_manage_power, |
| .flags = FLAG_ETHER | FLAG_SEND_ZLP | FLAG_LINK_INTR, |
| }; |
| |
| static const struct usb_device_id products[] = { |
| { |
| /* SMSC7500 USB Gigabit Ethernet Device */ |
| USB_DEVICE(USB_VENDOR_ID_SMSC, USB_PRODUCT_ID_LAN7500), |
| .driver_info = (unsigned long) &smsc75xx_info, |
| }, |
| { |
| /* SMSC7500 USB Gigabit Ethernet Device */ |
| USB_DEVICE(USB_VENDOR_ID_SMSC, USB_PRODUCT_ID_LAN7505), |
| .driver_info = (unsigned long) &smsc75xx_info, |
| }, |
| { }, /* END */ |
| }; |
| MODULE_DEVICE_TABLE(usb, products); |
| |
| static struct usb_driver smsc75xx_driver = { |
| .name = SMSC_CHIPNAME, |
| .id_table = products, |
| .probe = usbnet_probe, |
| .suspend = smsc75xx_suspend, |
| .resume = smsc75xx_resume, |
| .reset_resume = smsc75xx_resume, |
| .disconnect = usbnet_disconnect, |
| .disable_hub_initiated_lpm = 1, |
| .supports_autosuspend = 1, |
| }; |
| |
| module_usb_driver(smsc75xx_driver); |
| |
| MODULE_AUTHOR("Nancy Lin"); |
| MODULE_AUTHOR("Steve Glendinning <steve.glendinning@shawell.net>"); |
| MODULE_DESCRIPTION("SMSC75XX USB 2.0 Gigabit Ethernet Devices"); |
| MODULE_LICENSE("GPL"); |