| /* |
| * Copyright (c) 2010 Red Hat Inc. |
| * Author : Dave Airlie <airlied@redhat.com> |
| * |
| * |
| * Licensed under GPLv2 |
| * |
| * vga_switcheroo.c - Support for laptop with dual GPU using one set of outputs |
| |
| Switcher interface - methods require for ATPX and DCM |
| - switchto - this throws the output MUX switch |
| - discrete_set_power - sets the power state for the discrete card |
| |
| GPU driver interface |
| - set_gpu_state - this should do the equiv of s/r for the card |
| - this should *not* set the discrete power state |
| - switch_check - check if the device is in a position to switch now |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/seq_file.h> |
| #include <linux/uaccess.h> |
| #include <linux/fs.h> |
| #include <linux/debugfs.h> |
| #include <linux/fb.h> |
| |
| #include <linux/pci.h> |
| #include <linux/vga_switcheroo.h> |
| |
| #include <linux/vgaarb.h> |
| |
| struct vga_switcheroo_client { |
| struct pci_dev *pdev; |
| struct fb_info *fb_info; |
| int pwr_state; |
| const struct vga_switcheroo_client_ops *ops; |
| int id; |
| bool active; |
| struct list_head list; |
| }; |
| |
| static DEFINE_MUTEX(vgasr_mutex); |
| |
| struct vgasr_priv { |
| |
| bool active; |
| bool delayed_switch_active; |
| enum vga_switcheroo_client_id delayed_client_id; |
| |
| struct dentry *debugfs_root; |
| struct dentry *switch_file; |
| |
| int registered_clients; |
| struct list_head clients; |
| |
| struct vga_switcheroo_handler *handler; |
| }; |
| |
| #define ID_BIT_AUDIO 0x100 |
| #define client_is_audio(c) ((c)->id & ID_BIT_AUDIO) |
| #define client_is_vga(c) ((c)->id == -1 || !client_is_audio(c)) |
| #define client_id(c) ((c)->id & ~ID_BIT_AUDIO) |
| |
| static int vga_switcheroo_debugfs_init(struct vgasr_priv *priv); |
| static void vga_switcheroo_debugfs_fini(struct vgasr_priv *priv); |
| |
| /* only one switcheroo per system */ |
| static struct vgasr_priv vgasr_priv = { |
| .clients = LIST_HEAD_INIT(vgasr_priv.clients), |
| }; |
| |
| static bool vga_switcheroo_ready(void) |
| { |
| /* we're ready if we get two clients + handler */ |
| return !vgasr_priv.active && |
| vgasr_priv.registered_clients == 2 && vgasr_priv.handler; |
| } |
| |
| static void vga_switcheroo_enable(void) |
| { |
| int ret; |
| struct vga_switcheroo_client *client; |
| |
| /* call the handler to init */ |
| if (vgasr_priv.handler->init) |
| vgasr_priv.handler->init(); |
| |
| list_for_each_entry(client, &vgasr_priv.clients, list) { |
| if (client->id != -1) |
| continue; |
| ret = vgasr_priv.handler->get_client_id(client->pdev); |
| if (ret < 0) |
| return; |
| |
| client->id = ret; |
| } |
| vga_switcheroo_debugfs_init(&vgasr_priv); |
| vgasr_priv.active = true; |
| } |
| |
| int vga_switcheroo_register_handler(struct vga_switcheroo_handler *handler) |
| { |
| mutex_lock(&vgasr_mutex); |
| if (vgasr_priv.handler) { |
| mutex_unlock(&vgasr_mutex); |
| return -EINVAL; |
| } |
| |
| vgasr_priv.handler = handler; |
| if (vga_switcheroo_ready()) { |
| printk(KERN_INFO "vga_switcheroo: enabled\n"); |
| vga_switcheroo_enable(); |
| } |
| mutex_unlock(&vgasr_mutex); |
| return 0; |
| } |
| EXPORT_SYMBOL(vga_switcheroo_register_handler); |
| |
| void vga_switcheroo_unregister_handler(void) |
| { |
| mutex_lock(&vgasr_mutex); |
| vgasr_priv.handler = NULL; |
| if (vgasr_priv.active) { |
| pr_info("vga_switcheroo: disabled\n"); |
| vga_switcheroo_debugfs_fini(&vgasr_priv); |
| vgasr_priv.active = false; |
| } |
| mutex_unlock(&vgasr_mutex); |
| } |
| EXPORT_SYMBOL(vga_switcheroo_unregister_handler); |
| |
| static int register_client(struct pci_dev *pdev, |
| const struct vga_switcheroo_client_ops *ops, |
| int id, bool active) |
| { |
| struct vga_switcheroo_client *client; |
| |
| client = kzalloc(sizeof(*client), GFP_KERNEL); |
| if (!client) |
| return -ENOMEM; |
| |
| client->pwr_state = VGA_SWITCHEROO_ON; |
| client->pdev = pdev; |
| client->ops = ops; |
| client->id = id; |
| client->active = active; |
| |
| mutex_lock(&vgasr_mutex); |
| list_add_tail(&client->list, &vgasr_priv.clients); |
| if (client_is_vga(client)) |
| vgasr_priv.registered_clients++; |
| |
| if (vga_switcheroo_ready()) { |
| printk(KERN_INFO "vga_switcheroo: enabled\n"); |
| vga_switcheroo_enable(); |
| } |
| mutex_unlock(&vgasr_mutex); |
| return 0; |
| } |
| |
| int vga_switcheroo_register_client(struct pci_dev *pdev, |
| const struct vga_switcheroo_client_ops *ops) |
| { |
| return register_client(pdev, ops, -1, |
| pdev == vga_default_device()); |
| } |
| EXPORT_SYMBOL(vga_switcheroo_register_client); |
| |
| int vga_switcheroo_register_audio_client(struct pci_dev *pdev, |
| const struct vga_switcheroo_client_ops *ops, |
| int id, bool active) |
| { |
| return register_client(pdev, ops, id | ID_BIT_AUDIO, active); |
| } |
| EXPORT_SYMBOL(vga_switcheroo_register_audio_client); |
| |
| static struct vga_switcheroo_client * |
| find_client_from_pci(struct list_head *head, struct pci_dev *pdev) |
| { |
| struct vga_switcheroo_client *client; |
| list_for_each_entry(client, head, list) |
| if (client->pdev == pdev) |
| return client; |
| return NULL; |
| } |
| |
| static struct vga_switcheroo_client * |
| find_client_from_id(struct list_head *head, int client_id) |
| { |
| struct vga_switcheroo_client *client; |
| list_for_each_entry(client, head, list) |
| if (client->id == client_id) |
| return client; |
| return NULL; |
| } |
| |
| static struct vga_switcheroo_client * |
| find_active_client(struct list_head *head) |
| { |
| struct vga_switcheroo_client *client; |
| list_for_each_entry(client, head, list) |
| if (client->active && client_is_vga(client)) |
| return client; |
| return NULL; |
| } |
| |
| int vga_switcheroo_get_client_state(struct pci_dev *pdev) |
| { |
| struct vga_switcheroo_client *client; |
| |
| client = find_client_from_pci(&vgasr_priv.clients, pdev); |
| if (!client) |
| return VGA_SWITCHEROO_NOT_FOUND; |
| if (!vgasr_priv.active) |
| return VGA_SWITCHEROO_INIT; |
| return client->pwr_state; |
| } |
| EXPORT_SYMBOL(vga_switcheroo_get_client_state); |
| |
| void vga_switcheroo_unregister_client(struct pci_dev *pdev) |
| { |
| struct vga_switcheroo_client *client; |
| |
| mutex_lock(&vgasr_mutex); |
| client = find_client_from_pci(&vgasr_priv.clients, pdev); |
| if (client) { |
| if (client_is_vga(client)) |
| vgasr_priv.registered_clients--; |
| list_del(&client->list); |
| kfree(client); |
| } |
| if (vgasr_priv.active && vgasr_priv.registered_clients < 2) { |
| printk(KERN_INFO "vga_switcheroo: disabled\n"); |
| vga_switcheroo_debugfs_fini(&vgasr_priv); |
| vgasr_priv.active = false; |
| } |
| mutex_unlock(&vgasr_mutex); |
| } |
| EXPORT_SYMBOL(vga_switcheroo_unregister_client); |
| |
| void vga_switcheroo_client_fb_set(struct pci_dev *pdev, |
| struct fb_info *info) |
| { |
| struct vga_switcheroo_client *client; |
| |
| mutex_lock(&vgasr_mutex); |
| client = find_client_from_pci(&vgasr_priv.clients, pdev); |
| if (client) |
| client->fb_info = info; |
| mutex_unlock(&vgasr_mutex); |
| } |
| EXPORT_SYMBOL(vga_switcheroo_client_fb_set); |
| |
| static int vga_switcheroo_show(struct seq_file *m, void *v) |
| { |
| struct vga_switcheroo_client *client; |
| int i = 0; |
| mutex_lock(&vgasr_mutex); |
| list_for_each_entry(client, &vgasr_priv.clients, list) { |
| seq_printf(m, "%d:%s%s:%c:%s:%s\n", i, |
| client_id(client) == VGA_SWITCHEROO_DIS ? "DIS" : "IGD", |
| client_is_vga(client) ? "" : "-Audio", |
| client->active ? '+' : ' ', |
| client->pwr_state ? "Pwr" : "Off", |
| pci_name(client->pdev)); |
| i++; |
| } |
| mutex_unlock(&vgasr_mutex); |
| return 0; |
| } |
| |
| static int vga_switcheroo_debugfs_open(struct inode *inode, struct file *file) |
| { |
| return single_open(file, vga_switcheroo_show, NULL); |
| } |
| |
| static int vga_switchon(struct vga_switcheroo_client *client) |
| { |
| if (vgasr_priv.handler->power_state) |
| vgasr_priv.handler->power_state(client->id, VGA_SWITCHEROO_ON); |
| /* call the driver callback to turn on device */ |
| client->ops->set_gpu_state(client->pdev, VGA_SWITCHEROO_ON); |
| client->pwr_state = VGA_SWITCHEROO_ON; |
| return 0; |
| } |
| |
| static int vga_switchoff(struct vga_switcheroo_client *client) |
| { |
| /* call the driver callback to turn off device */ |
| client->ops->set_gpu_state(client->pdev, VGA_SWITCHEROO_OFF); |
| if (vgasr_priv.handler->power_state) |
| vgasr_priv.handler->power_state(client->id, VGA_SWITCHEROO_OFF); |
| client->pwr_state = VGA_SWITCHEROO_OFF; |
| return 0; |
| } |
| |
| static void set_audio_state(int id, int state) |
| { |
| struct vga_switcheroo_client *client; |
| |
| client = find_client_from_id(&vgasr_priv.clients, id | ID_BIT_AUDIO); |
| if (client && client->pwr_state != state) { |
| client->ops->set_gpu_state(client->pdev, state); |
| client->pwr_state = state; |
| } |
| } |
| |
| /* stage one happens before delay */ |
| static int vga_switchto_stage1(struct vga_switcheroo_client *new_client) |
| { |
| struct vga_switcheroo_client *active; |
| |
| active = find_active_client(&vgasr_priv.clients); |
| if (!active) |
| return 0; |
| |
| if (new_client->pwr_state == VGA_SWITCHEROO_OFF) |
| vga_switchon(new_client); |
| |
| vga_set_default_device(new_client->pdev); |
| return 0; |
| } |
| |
| /* post delay */ |
| static int vga_switchto_stage2(struct vga_switcheroo_client *new_client) |
| { |
| int ret; |
| struct vga_switcheroo_client *active; |
| |
| active = find_active_client(&vgasr_priv.clients); |
| if (!active) |
| return 0; |
| |
| active->active = false; |
| |
| set_audio_state(active->id, VGA_SWITCHEROO_OFF); |
| |
| if (new_client->fb_info) { |
| struct fb_event event; |
| event.info = new_client->fb_info; |
| fb_notifier_call_chain(FB_EVENT_REMAP_ALL_CONSOLE, &event); |
| } |
| |
| ret = vgasr_priv.handler->switchto(new_client->id); |
| if (ret) |
| return ret; |
| |
| if (new_client->ops->reprobe) |
| new_client->ops->reprobe(new_client->pdev); |
| |
| if (active->pwr_state == VGA_SWITCHEROO_ON) |
| vga_switchoff(active); |
| |
| set_audio_state(new_client->id, VGA_SWITCHEROO_ON); |
| |
| new_client->active = true; |
| return 0; |
| } |
| |
| static bool check_can_switch(void) |
| { |
| struct vga_switcheroo_client *client; |
| |
| list_for_each_entry(client, &vgasr_priv.clients, list) { |
| if (!client->ops->can_switch(client->pdev)) { |
| printk(KERN_ERR "vga_switcheroo: client %x refused switch\n", client->id); |
| return false; |
| } |
| } |
| return true; |
| } |
| |
| static ssize_t |
| vga_switcheroo_debugfs_write(struct file *filp, const char __user *ubuf, |
| size_t cnt, loff_t *ppos) |
| { |
| char usercmd[64]; |
| int ret; |
| bool delay = false, can_switch; |
| bool just_mux = false; |
| int client_id = -1; |
| struct vga_switcheroo_client *client = NULL; |
| |
| if (cnt > 63) |
| cnt = 63; |
| |
| if (copy_from_user(usercmd, ubuf, cnt)) |
| return -EFAULT; |
| |
| mutex_lock(&vgasr_mutex); |
| |
| if (!vgasr_priv.active) { |
| cnt = -EINVAL; |
| goto out; |
| } |
| |
| /* pwr off the device not in use */ |
| if (strncmp(usercmd, "OFF", 3) == 0) { |
| list_for_each_entry(client, &vgasr_priv.clients, list) { |
| if (client->active || client_is_audio(client)) |
| continue; |
| set_audio_state(client->id, VGA_SWITCHEROO_OFF); |
| if (client->pwr_state == VGA_SWITCHEROO_ON) |
| vga_switchoff(client); |
| } |
| goto out; |
| } |
| /* pwr on the device not in use */ |
| if (strncmp(usercmd, "ON", 2) == 0) { |
| list_for_each_entry(client, &vgasr_priv.clients, list) { |
| if (client->active || client_is_audio(client)) |
| continue; |
| if (client->pwr_state == VGA_SWITCHEROO_OFF) |
| vga_switchon(client); |
| set_audio_state(client->id, VGA_SWITCHEROO_ON); |
| } |
| goto out; |
| } |
| |
| /* request a delayed switch - test can we switch now */ |
| if (strncmp(usercmd, "DIGD", 4) == 0) { |
| client_id = VGA_SWITCHEROO_IGD; |
| delay = true; |
| } |
| |
| if (strncmp(usercmd, "DDIS", 4) == 0) { |
| client_id = VGA_SWITCHEROO_DIS; |
| delay = true; |
| } |
| |
| if (strncmp(usercmd, "IGD", 3) == 0) |
| client_id = VGA_SWITCHEROO_IGD; |
| |
| if (strncmp(usercmd, "DIS", 3) == 0) |
| client_id = VGA_SWITCHEROO_DIS; |
| |
| if (strncmp(usercmd, "MIGD", 4) == 0) { |
| just_mux = true; |
| client_id = VGA_SWITCHEROO_IGD; |
| } |
| if (strncmp(usercmd, "MDIS", 4) == 0) { |
| just_mux = true; |
| client_id = VGA_SWITCHEROO_DIS; |
| } |
| |
| if (client_id == -1) |
| goto out; |
| client = find_client_from_id(&vgasr_priv.clients, client_id); |
| if (!client) |
| goto out; |
| |
| vgasr_priv.delayed_switch_active = false; |
| |
| if (just_mux) { |
| ret = vgasr_priv.handler->switchto(client_id); |
| goto out; |
| } |
| |
| if (client->active) |
| goto out; |
| |
| /* okay we want a switch - test if devices are willing to switch */ |
| can_switch = check_can_switch(); |
| |
| if (can_switch == false && delay == false) |
| goto out; |
| |
| if (can_switch) { |
| ret = vga_switchto_stage1(client); |
| if (ret) |
| printk(KERN_ERR "vga_switcheroo: switching failed stage 1 %d\n", ret); |
| |
| ret = vga_switchto_stage2(client); |
| if (ret) |
| printk(KERN_ERR "vga_switcheroo: switching failed stage 2 %d\n", ret); |
| |
| } else { |
| printk(KERN_INFO "vga_switcheroo: setting delayed switch to client %d\n", client->id); |
| vgasr_priv.delayed_switch_active = true; |
| vgasr_priv.delayed_client_id = client_id; |
| |
| ret = vga_switchto_stage1(client); |
| if (ret) |
| printk(KERN_ERR "vga_switcheroo: delayed switching stage 1 failed %d\n", ret); |
| } |
| |
| out: |
| mutex_unlock(&vgasr_mutex); |
| return cnt; |
| } |
| |
| static const struct file_operations vga_switcheroo_debugfs_fops = { |
| .owner = THIS_MODULE, |
| .open = vga_switcheroo_debugfs_open, |
| .write = vga_switcheroo_debugfs_write, |
| .read = seq_read, |
| .llseek = seq_lseek, |
| .release = single_release, |
| }; |
| |
| static void vga_switcheroo_debugfs_fini(struct vgasr_priv *priv) |
| { |
| if (priv->switch_file) { |
| debugfs_remove(priv->switch_file); |
| priv->switch_file = NULL; |
| } |
| if (priv->debugfs_root) { |
| debugfs_remove(priv->debugfs_root); |
| priv->debugfs_root = NULL; |
| } |
| } |
| |
| static int vga_switcheroo_debugfs_init(struct vgasr_priv *priv) |
| { |
| /* already initialised */ |
| if (priv->debugfs_root) |
| return 0; |
| priv->debugfs_root = debugfs_create_dir("vgaswitcheroo", NULL); |
| |
| if (!priv->debugfs_root) { |
| printk(KERN_ERR "vga_switcheroo: Cannot create /sys/kernel/debug/vgaswitcheroo\n"); |
| goto fail; |
| } |
| |
| priv->switch_file = debugfs_create_file("switch", 0644, |
| priv->debugfs_root, NULL, &vga_switcheroo_debugfs_fops); |
| if (!priv->switch_file) { |
| printk(KERN_ERR "vga_switcheroo: cannot create /sys/kernel/debug/vgaswitcheroo/switch\n"); |
| goto fail; |
| } |
| return 0; |
| fail: |
| vga_switcheroo_debugfs_fini(priv); |
| return -1; |
| } |
| |
| int vga_switcheroo_process_delayed_switch(void) |
| { |
| struct vga_switcheroo_client *client; |
| int ret; |
| int err = -EINVAL; |
| |
| mutex_lock(&vgasr_mutex); |
| if (!vgasr_priv.delayed_switch_active) |
| goto err; |
| |
| printk(KERN_INFO "vga_switcheroo: processing delayed switch to %d\n", vgasr_priv.delayed_client_id); |
| |
| client = find_client_from_id(&vgasr_priv.clients, |
| vgasr_priv.delayed_client_id); |
| if (!client || !check_can_switch()) |
| goto err; |
| |
| ret = vga_switchto_stage2(client); |
| if (ret) |
| printk(KERN_ERR "vga_switcheroo: delayed switching failed stage 2 %d\n", ret); |
| |
| vgasr_priv.delayed_switch_active = false; |
| err = 0; |
| err: |
| mutex_unlock(&vgasr_mutex); |
| return err; |
| } |
| EXPORT_SYMBOL(vga_switcheroo_process_delayed_switch); |