| /* |
| NXP TDA10048HN DVB OFDM demodulator driver |
| |
| Copyright (C) 2009 Steven Toth <stoth@kernellabs.com> |
| |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 2 of the License, or |
| (at your option) any later version. |
| |
| This program is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with this program; if not, write to the Free Software |
| Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/string.h> |
| #include <linux/slab.h> |
| #include <linux/delay.h> |
| #include <linux/math64.h> |
| #include <asm/div64.h> |
| #include "dvb_frontend.h" |
| #include "dvb_math.h" |
| #include "tda10048.h" |
| |
| #define TDA10048_DEFAULT_FIRMWARE "dvb-fe-tda10048-1.0.fw" |
| #define TDA10048_DEFAULT_FIRMWARE_SIZE 24878 |
| |
| /* Register name definitions */ |
| #define TDA10048_IDENTITY 0x00 |
| #define TDA10048_VERSION 0x01 |
| #define TDA10048_DSP_CODE_CPT 0x0C |
| #define TDA10048_DSP_CODE_IN 0x0E |
| #define TDA10048_IN_CONF1 0x10 |
| #define TDA10048_IN_CONF2 0x11 |
| #define TDA10048_IN_CONF3 0x12 |
| #define TDA10048_OUT_CONF1 0x14 |
| #define TDA10048_OUT_CONF2 0x15 |
| #define TDA10048_OUT_CONF3 0x16 |
| #define TDA10048_AUTO 0x18 |
| #define TDA10048_SYNC_STATUS 0x1A |
| #define TDA10048_CONF_C4_1 0x1E |
| #define TDA10048_CONF_C4_2 0x1F |
| #define TDA10048_CODE_IN_RAM 0x20 |
| #define TDA10048_CHANNEL_INFO1_R 0x22 |
| #define TDA10048_CHANNEL_INFO2_R 0x23 |
| #define TDA10048_CHANNEL_INFO1 0x24 |
| #define TDA10048_CHANNEL_INFO2 0x25 |
| #define TDA10048_TIME_ERROR_R 0x26 |
| #define TDA10048_TIME_ERROR 0x27 |
| #define TDA10048_FREQ_ERROR_LSB_R 0x28 |
| #define TDA10048_FREQ_ERROR_MSB_R 0x29 |
| #define TDA10048_FREQ_ERROR_LSB 0x2A |
| #define TDA10048_FREQ_ERROR_MSB 0x2B |
| #define TDA10048_IT_SEL 0x30 |
| #define TDA10048_IT_STAT 0x32 |
| #define TDA10048_DSP_AD_LSB 0x3C |
| #define TDA10048_DSP_AD_MSB 0x3D |
| #define TDA10048_DSP_REG_LSB 0x3E |
| #define TDA10048_DSP_REG_MSB 0x3F |
| #define TDA10048_CONF_TRISTATE1 0x44 |
| #define TDA10048_CONF_TRISTATE2 0x45 |
| #define TDA10048_CONF_POLARITY 0x46 |
| #define TDA10048_GPIO_SP_DS0 0x48 |
| #define TDA10048_GPIO_SP_DS1 0x49 |
| #define TDA10048_GPIO_SP_DS2 0x4A |
| #define TDA10048_GPIO_SP_DS3 0x4B |
| #define TDA10048_GPIO_OUT_SEL 0x4C |
| #define TDA10048_GPIO_SELECT 0x4D |
| #define TDA10048_IC_MODE 0x4E |
| #define TDA10048_CONF_XO 0x50 |
| #define TDA10048_CONF_PLL1 0x51 |
| #define TDA10048_CONF_PLL2 0x52 |
| #define TDA10048_CONF_PLL3 0x53 |
| #define TDA10048_CONF_ADC 0x54 |
| #define TDA10048_CONF_ADC_2 0x55 |
| #define TDA10048_CONF_C1_1 0x60 |
| #define TDA10048_CONF_C1_3 0x62 |
| #define TDA10048_AGC_CONF 0x70 |
| #define TDA10048_AGC_THRESHOLD_LSB 0x72 |
| #define TDA10048_AGC_THRESHOLD_MSB 0x73 |
| #define TDA10048_AGC_RENORM 0x74 |
| #define TDA10048_AGC_GAINS 0x76 |
| #define TDA10048_AGC_TUN_MIN 0x78 |
| #define TDA10048_AGC_TUN_MAX 0x79 |
| #define TDA10048_AGC_IF_MIN 0x7A |
| #define TDA10048_AGC_IF_MAX 0x7B |
| #define TDA10048_AGC_TUN_LEVEL 0x7E |
| #define TDA10048_AGC_IF_LEVEL 0x7F |
| #define TDA10048_DIG_AGC_LEVEL 0x81 |
| #define TDA10048_FREQ_PHY2_LSB 0x86 |
| #define TDA10048_FREQ_PHY2_MSB 0x87 |
| #define TDA10048_TIME_INVWREF_LSB 0x88 |
| #define TDA10048_TIME_INVWREF_MSB 0x89 |
| #define TDA10048_TIME_WREF_LSB 0x8A |
| #define TDA10048_TIME_WREF_MID1 0x8B |
| #define TDA10048_TIME_WREF_MID2 0x8C |
| #define TDA10048_TIME_WREF_MSB 0x8D |
| #define TDA10048_NP_OUT 0xA2 |
| #define TDA10048_CELL_ID_LSB 0xA4 |
| #define TDA10048_CELL_ID_MSB 0xA5 |
| #define TDA10048_EXTTPS_ODD 0xAA |
| #define TDA10048_EXTTPS_EVEN 0xAB |
| #define TDA10048_TPS_LENGTH 0xAC |
| #define TDA10048_FREE_REG_1 0xB2 |
| #define TDA10048_FREE_REG_2 0xB3 |
| #define TDA10048_CONF_C3_1 0xC0 |
| #define TDA10048_CVBER_CTRL 0xC2 |
| #define TDA10048_CBER_NMAX_LSB 0xC4 |
| #define TDA10048_CBER_NMAX_MSB 0xC5 |
| #define TDA10048_CBER_LSB 0xC6 |
| #define TDA10048_CBER_MSB 0xC7 |
| #define TDA10048_VBER_LSB 0xC8 |
| #define TDA10048_VBER_MID 0xC9 |
| #define TDA10048_VBER_MSB 0xCA |
| #define TDA10048_CVBER_LUT 0xCC |
| #define TDA10048_UNCOR_CTRL 0xCD |
| #define TDA10048_UNCOR_CPT_LSB 0xCE |
| #define TDA10048_UNCOR_CPT_MSB 0xCF |
| #define TDA10048_SOFT_IT_C3 0xD6 |
| #define TDA10048_CONF_TS2 0xE0 |
| #define TDA10048_CONF_TS1 0xE1 |
| |
| static unsigned int debug; |
| |
| #define dprintk(level, fmt, arg...)\ |
| do { if (debug >= level)\ |
| printk(KERN_DEBUG "tda10048: " fmt, ## arg);\ |
| } while (0) |
| |
| struct tda10048_state { |
| |
| struct i2c_adapter *i2c; |
| |
| /* We'll cache and update the attach config settings */ |
| struct tda10048_config config; |
| struct dvb_frontend frontend; |
| |
| int fwloaded; |
| |
| u32 freq_if_hz; |
| u32 xtal_hz; |
| u32 pll_mfactor; |
| u32 pll_nfactor; |
| u32 pll_pfactor; |
| u32 sample_freq; |
| |
| u32 bandwidth; |
| }; |
| |
| static struct init_tab { |
| u8 reg; |
| u16 data; |
| } init_tab[] = { |
| { TDA10048_CONF_PLL1, 0x08 }, |
| { TDA10048_CONF_ADC_2, 0x00 }, |
| { TDA10048_CONF_C4_1, 0x00 }, |
| { TDA10048_CONF_PLL1, 0x0f }, |
| { TDA10048_CONF_PLL2, 0x0a }, |
| { TDA10048_CONF_PLL3, 0x43 }, |
| { TDA10048_FREQ_PHY2_LSB, 0x02 }, |
| { TDA10048_FREQ_PHY2_MSB, 0x0a }, |
| { TDA10048_TIME_WREF_LSB, 0xbd }, |
| { TDA10048_TIME_WREF_MID1, 0xe4 }, |
| { TDA10048_TIME_WREF_MID2, 0xa8 }, |
| { TDA10048_TIME_WREF_MSB, 0x02 }, |
| { TDA10048_TIME_INVWREF_LSB, 0x04 }, |
| { TDA10048_TIME_INVWREF_MSB, 0x06 }, |
| { TDA10048_CONF_C4_1, 0x00 }, |
| { TDA10048_CONF_C1_1, 0xa8 }, |
| { TDA10048_AGC_CONF, 0x16 }, |
| { TDA10048_CONF_C1_3, 0x0b }, |
| { TDA10048_AGC_TUN_MIN, 0x00 }, |
| { TDA10048_AGC_TUN_MAX, 0xff }, |
| { TDA10048_AGC_IF_MIN, 0x00 }, |
| { TDA10048_AGC_IF_MAX, 0xff }, |
| { TDA10048_AGC_THRESHOLD_MSB, 0x00 }, |
| { TDA10048_AGC_THRESHOLD_LSB, 0x70 }, |
| { TDA10048_CVBER_CTRL, 0x38 }, |
| { TDA10048_AGC_GAINS, 0x12 }, |
| { TDA10048_CONF_XO, 0x00 }, |
| { TDA10048_CONF_TS1, 0x07 }, |
| { TDA10048_IC_MODE, 0x00 }, |
| { TDA10048_CONF_TS2, 0xc0 }, |
| { TDA10048_CONF_TRISTATE1, 0x21 }, |
| { TDA10048_CONF_TRISTATE2, 0x00 }, |
| { TDA10048_CONF_POLARITY, 0x00 }, |
| { TDA10048_CONF_C4_2, 0x04 }, |
| { TDA10048_CONF_ADC, 0x60 }, |
| { TDA10048_CONF_ADC_2, 0x10 }, |
| { TDA10048_CONF_ADC, 0x60 }, |
| { TDA10048_CONF_ADC_2, 0x00 }, |
| { TDA10048_CONF_C1_1, 0xa8 }, |
| { TDA10048_UNCOR_CTRL, 0x00 }, |
| { TDA10048_CONF_C4_2, 0x04 }, |
| }; |
| |
| static struct pll_tab { |
| u32 clk_freq_khz; |
| u32 if_freq_khz; |
| } pll_tab[] = { |
| { TDA10048_CLK_4000, TDA10048_IF_36130 }, |
| { TDA10048_CLK_16000, TDA10048_IF_3300 }, |
| { TDA10048_CLK_16000, TDA10048_IF_3500 }, |
| { TDA10048_CLK_16000, TDA10048_IF_3800 }, |
| { TDA10048_CLK_16000, TDA10048_IF_4000 }, |
| { TDA10048_CLK_16000, TDA10048_IF_4300 }, |
| { TDA10048_CLK_16000, TDA10048_IF_4500 }, |
| { TDA10048_CLK_16000, TDA10048_IF_5000 }, |
| { TDA10048_CLK_16000, TDA10048_IF_36130 }, |
| }; |
| |
| static int tda10048_writereg(struct tda10048_state *state, u8 reg, u8 data) |
| { |
| struct tda10048_config *config = &state->config; |
| int ret; |
| u8 buf[] = { reg, data }; |
| struct i2c_msg msg = { |
| .addr = config->demod_address, |
| .flags = 0, .buf = buf, .len = 2 }; |
| |
| dprintk(2, "%s(reg = 0x%02x, data = 0x%02x)\n", __func__, reg, data); |
| |
| ret = i2c_transfer(state->i2c, &msg, 1); |
| |
| if (ret != 1) |
| printk("%s: writereg error (ret == %i)\n", __func__, ret); |
| |
| return (ret != 1) ? -1 : 0; |
| } |
| |
| static u8 tda10048_readreg(struct tda10048_state *state, u8 reg) |
| { |
| struct tda10048_config *config = &state->config; |
| int ret; |
| u8 b0[] = { reg }; |
| u8 b1[] = { 0 }; |
| struct i2c_msg msg[] = { |
| { .addr = config->demod_address, |
| .flags = 0, .buf = b0, .len = 1 }, |
| { .addr = config->demod_address, |
| .flags = I2C_M_RD, .buf = b1, .len = 1 } }; |
| |
| dprintk(2, "%s(reg = 0x%02x)\n", __func__, reg); |
| |
| ret = i2c_transfer(state->i2c, msg, 2); |
| |
| if (ret != 2) |
| printk(KERN_ERR "%s: readreg error (ret == %i)\n", |
| __func__, ret); |
| |
| return b1[0]; |
| } |
| |
| static int tda10048_writeregbulk(struct tda10048_state *state, u8 reg, |
| const u8 *data, u16 len) |
| { |
| struct tda10048_config *config = &state->config; |
| int ret = -EREMOTEIO; |
| struct i2c_msg msg; |
| u8 *buf; |
| |
| dprintk(2, "%s(%d, ?, len = %d)\n", __func__, reg, len); |
| |
| buf = kmalloc(len + 1, GFP_KERNEL); |
| if (buf == NULL) { |
| ret = -ENOMEM; |
| goto error; |
| } |
| |
| *buf = reg; |
| memcpy(buf + 1, data, len); |
| |
| msg.addr = config->demod_address; |
| msg.flags = 0; |
| msg.buf = buf; |
| msg.len = len + 1; |
| |
| dprintk(2, "%s(): write len = %d\n", |
| __func__, msg.len); |
| |
| ret = i2c_transfer(state->i2c, &msg, 1); |
| if (ret != 1) { |
| printk(KERN_ERR "%s(): writereg error err %i\n", |
| __func__, ret); |
| ret = -EREMOTEIO; |
| } |
| |
| error: |
| kfree(buf); |
| |
| return ret; |
| } |
| |
| static int tda10048_set_phy2(struct dvb_frontend *fe, u32 sample_freq_hz, |
| u32 if_hz) |
| { |
| struct tda10048_state *state = fe->demodulator_priv; |
| u64 t; |
| |
| dprintk(1, "%s()\n", __func__); |
| |
| if (sample_freq_hz == 0) |
| return -EINVAL; |
| |
| if (if_hz < (sample_freq_hz / 2)) { |
| /* PHY2 = (if2/fs) * 2^15 */ |
| t = if_hz; |
| t *= 10; |
| t *= 32768; |
| do_div(t, sample_freq_hz); |
| t += 5; |
| do_div(t, 10); |
| } else { |
| /* PHY2 = ((IF1-fs)/fs) * 2^15 */ |
| t = sample_freq_hz - if_hz; |
| t *= 10; |
| t *= 32768; |
| do_div(t, sample_freq_hz); |
| t += 5; |
| do_div(t, 10); |
| t = ~t + 1; |
| } |
| |
| tda10048_writereg(state, TDA10048_FREQ_PHY2_LSB, (u8)t); |
| tda10048_writereg(state, TDA10048_FREQ_PHY2_MSB, (u8)(t >> 8)); |
| |
| return 0; |
| } |
| |
| static int tda10048_set_wref(struct dvb_frontend *fe, u32 sample_freq_hz, |
| u32 bw) |
| { |
| struct tda10048_state *state = fe->demodulator_priv; |
| u64 t, z; |
| |
| dprintk(1, "%s()\n", __func__); |
| |
| if (sample_freq_hz == 0) |
| return -EINVAL; |
| |
| /* WREF = (B / (7 * fs)) * 2^31 */ |
| t = bw * 10; |
| /* avoid warning: this decimal constant is unsigned only in ISO C90 */ |
| /* t *= 2147483648 on 32bit platforms */ |
| t *= (2048 * 1024); |
| t *= 1024; |
| z = 7 * sample_freq_hz; |
| do_div(t, z); |
| t += 5; |
| do_div(t, 10); |
| |
| tda10048_writereg(state, TDA10048_TIME_WREF_LSB, (u8)t); |
| tda10048_writereg(state, TDA10048_TIME_WREF_MID1, (u8)(t >> 8)); |
| tda10048_writereg(state, TDA10048_TIME_WREF_MID2, (u8)(t >> 16)); |
| tda10048_writereg(state, TDA10048_TIME_WREF_MSB, (u8)(t >> 24)); |
| |
| return 0; |
| } |
| |
| static int tda10048_set_invwref(struct dvb_frontend *fe, u32 sample_freq_hz, |
| u32 bw) |
| { |
| struct tda10048_state *state = fe->demodulator_priv; |
| u64 t; |
| |
| dprintk(1, "%s()\n", __func__); |
| |
| if (sample_freq_hz == 0) |
| return -EINVAL; |
| |
| /* INVWREF = ((7 * fs) / B) * 2^5 */ |
| t = sample_freq_hz; |
| t *= 7; |
| t *= 32; |
| t *= 10; |
| do_div(t, bw); |
| t += 5; |
| do_div(t, 10); |
| |
| tda10048_writereg(state, TDA10048_TIME_INVWREF_LSB, (u8)t); |
| tda10048_writereg(state, TDA10048_TIME_INVWREF_MSB, (u8)(t >> 8)); |
| |
| return 0; |
| } |
| |
| static int tda10048_set_bandwidth(struct dvb_frontend *fe, |
| u32 bw) |
| { |
| struct tda10048_state *state = fe->demodulator_priv; |
| dprintk(1, "%s(bw=%d)\n", __func__, bw); |
| |
| /* Bandwidth setting may need to be adjusted */ |
| switch (bw) { |
| case 6000000: |
| case 7000000: |
| case 8000000: |
| tda10048_set_wref(fe, state->sample_freq, bw); |
| tda10048_set_invwref(fe, state->sample_freq, bw); |
| break; |
| default: |
| printk(KERN_ERR "%s() invalid bandwidth\n", __func__); |
| return -EINVAL; |
| } |
| |
| state->bandwidth = bw; |
| |
| return 0; |
| } |
| |
| static int tda10048_set_if(struct dvb_frontend *fe, u32 bw) |
| { |
| struct tda10048_state *state = fe->demodulator_priv; |
| struct tda10048_config *config = &state->config; |
| int i; |
| u32 if_freq_khz; |
| |
| dprintk(1, "%s(bw = %d)\n", __func__, bw); |
| |
| /* based on target bandwidth and clk we calculate pll factors */ |
| switch (bw) { |
| case 6000000: |
| if_freq_khz = config->dtv6_if_freq_khz; |
| break; |
| case 7000000: |
| if_freq_khz = config->dtv7_if_freq_khz; |
| break; |
| case 8000000: |
| if_freq_khz = config->dtv8_if_freq_khz; |
| break; |
| default: |
| printk(KERN_ERR "%s() no default\n", __func__); |
| return -EINVAL; |
| } |
| |
| for (i = 0; i < ARRAY_SIZE(pll_tab); i++) { |
| if ((pll_tab[i].clk_freq_khz == config->clk_freq_khz) && |
| (pll_tab[i].if_freq_khz == if_freq_khz)) { |
| |
| state->freq_if_hz = pll_tab[i].if_freq_khz * 1000; |
| state->xtal_hz = pll_tab[i].clk_freq_khz * 1000; |
| break; |
| } |
| } |
| if (i == ARRAY_SIZE(pll_tab)) { |
| printk(KERN_ERR "%s() Incorrect attach settings\n", |
| __func__); |
| return -EINVAL; |
| } |
| |
| dprintk(1, "- freq_if_hz = %d\n", state->freq_if_hz); |
| dprintk(1, "- xtal_hz = %d\n", state->xtal_hz); |
| dprintk(1, "- pll_mfactor = %d\n", state->pll_mfactor); |
| dprintk(1, "- pll_nfactor = %d\n", state->pll_nfactor); |
| dprintk(1, "- pll_pfactor = %d\n", state->pll_pfactor); |
| |
| /* Calculate the sample frequency */ |
| state->sample_freq = state->xtal_hz * (state->pll_mfactor + 45); |
| state->sample_freq /= (state->pll_nfactor + 1); |
| state->sample_freq /= (state->pll_pfactor + 4); |
| dprintk(1, "- sample_freq = %d\n", state->sample_freq); |
| |
| /* Update the I/F */ |
| tda10048_set_phy2(fe, state->sample_freq, state->freq_if_hz); |
| |
| return 0; |
| } |
| |
| static int tda10048_firmware_upload(struct dvb_frontend *fe) |
| { |
| struct tda10048_state *state = fe->demodulator_priv; |
| struct tda10048_config *config = &state->config; |
| const struct firmware *fw; |
| int ret; |
| int pos = 0; |
| int cnt; |
| u8 wlen = config->fwbulkwritelen; |
| |
| if ((wlen != TDA10048_BULKWRITE_200) && (wlen != TDA10048_BULKWRITE_50)) |
| wlen = TDA10048_BULKWRITE_200; |
| |
| /* request the firmware, this will block and timeout */ |
| printk(KERN_INFO "%s: waiting for firmware upload (%s)...\n", |
| __func__, |
| TDA10048_DEFAULT_FIRMWARE); |
| |
| ret = request_firmware(&fw, TDA10048_DEFAULT_FIRMWARE, |
| state->i2c->dev.parent); |
| if (ret) { |
| printk(KERN_ERR "%s: Upload failed. (file not found?)\n", |
| __func__); |
| return -EIO; |
| } else { |
| printk(KERN_INFO "%s: firmware read %Zu bytes.\n", |
| __func__, |
| fw->size); |
| ret = 0; |
| } |
| |
| if (fw->size != TDA10048_DEFAULT_FIRMWARE_SIZE) { |
| printk(KERN_ERR "%s: firmware incorrect size\n", __func__); |
| ret = -EIO; |
| } else { |
| printk(KERN_INFO "%s: firmware uploading\n", __func__); |
| |
| /* Soft reset */ |
| tda10048_writereg(state, TDA10048_CONF_TRISTATE1, |
| tda10048_readreg(state, TDA10048_CONF_TRISTATE1) |
| & 0xfe); |
| tda10048_writereg(state, TDA10048_CONF_TRISTATE1, |
| tda10048_readreg(state, TDA10048_CONF_TRISTATE1) |
| | 0x01); |
| |
| /* Put the demod into host download mode */ |
| tda10048_writereg(state, TDA10048_CONF_C4_1, |
| tda10048_readreg(state, TDA10048_CONF_C4_1) & 0xf9); |
| |
| /* Boot the DSP */ |
| tda10048_writereg(state, TDA10048_CONF_C4_1, |
| tda10048_readreg(state, TDA10048_CONF_C4_1) | 0x08); |
| |
| /* Prepare for download */ |
| tda10048_writereg(state, TDA10048_DSP_CODE_CPT, 0); |
| |
| /* Download the firmware payload */ |
| while (pos < fw->size) { |
| |
| if ((fw->size - pos) > wlen) |
| cnt = wlen; |
| else |
| cnt = fw->size - pos; |
| |
| tda10048_writeregbulk(state, TDA10048_DSP_CODE_IN, |
| &fw->data[pos], cnt); |
| |
| pos += cnt; |
| } |
| |
| ret = -EIO; |
| /* Wait up to 250ms for the DSP to boot */ |
| for (cnt = 0; cnt < 250 ; cnt += 10) { |
| |
| msleep(10); |
| |
| if (tda10048_readreg(state, TDA10048_SYNC_STATUS) |
| & 0x40) { |
| ret = 0; |
| break; |
| } |
| } |
| } |
| |
| release_firmware(fw); |
| |
| if (ret == 0) { |
| printk(KERN_INFO "%s: firmware uploaded\n", __func__); |
| state->fwloaded = 1; |
| } else |
| printk(KERN_ERR "%s: firmware upload failed\n", __func__); |
| |
| return ret; |
| } |
| |
| static int tda10048_set_inversion(struct dvb_frontend *fe, int inversion) |
| { |
| struct tda10048_state *state = fe->demodulator_priv; |
| |
| dprintk(1, "%s(%d)\n", __func__, inversion); |
| |
| if (inversion == TDA10048_INVERSION_ON) |
| tda10048_writereg(state, TDA10048_CONF_C1_1, |
| tda10048_readreg(state, TDA10048_CONF_C1_1) | 0x20); |
| else |
| tda10048_writereg(state, TDA10048_CONF_C1_1, |
| tda10048_readreg(state, TDA10048_CONF_C1_1) & 0xdf); |
| |
| return 0; |
| } |
| |
| /* Retrieve the demod settings */ |
| static int tda10048_get_tps(struct tda10048_state *state, |
| struct dtv_frontend_properties *p) |
| { |
| u8 val; |
| |
| /* Make sure the TPS regs are valid */ |
| if (!(tda10048_readreg(state, TDA10048_AUTO) & 0x01)) |
| return -EAGAIN; |
| |
| val = tda10048_readreg(state, TDA10048_OUT_CONF2); |
| switch ((val & 0x60) >> 5) { |
| case 0: |
| p->modulation = QPSK; |
| break; |
| case 1: |
| p->modulation = QAM_16; |
| break; |
| case 2: |
| p->modulation = QAM_64; |
| break; |
| } |
| switch ((val & 0x18) >> 3) { |
| case 0: |
| p->hierarchy = HIERARCHY_NONE; |
| break; |
| case 1: |
| p->hierarchy = HIERARCHY_1; |
| break; |
| case 2: |
| p->hierarchy = HIERARCHY_2; |
| break; |
| case 3: |
| p->hierarchy = HIERARCHY_4; |
| break; |
| } |
| switch (val & 0x07) { |
| case 0: |
| p->code_rate_HP = FEC_1_2; |
| break; |
| case 1: |
| p->code_rate_HP = FEC_2_3; |
| break; |
| case 2: |
| p->code_rate_HP = FEC_3_4; |
| break; |
| case 3: |
| p->code_rate_HP = FEC_5_6; |
| break; |
| case 4: |
| p->code_rate_HP = FEC_7_8; |
| break; |
| } |
| |
| val = tda10048_readreg(state, TDA10048_OUT_CONF3); |
| switch (val & 0x07) { |
| case 0: |
| p->code_rate_LP = FEC_1_2; |
| break; |
| case 1: |
| p->code_rate_LP = FEC_2_3; |
| break; |
| case 2: |
| p->code_rate_LP = FEC_3_4; |
| break; |
| case 3: |
| p->code_rate_LP = FEC_5_6; |
| break; |
| case 4: |
| p->code_rate_LP = FEC_7_8; |
| break; |
| } |
| |
| val = tda10048_readreg(state, TDA10048_OUT_CONF1); |
| switch ((val & 0x0c) >> 2) { |
| case 0: |
| p->guard_interval = GUARD_INTERVAL_1_32; |
| break; |
| case 1: |
| p->guard_interval = GUARD_INTERVAL_1_16; |
| break; |
| case 2: |
| p->guard_interval = GUARD_INTERVAL_1_8; |
| break; |
| case 3: |
| p->guard_interval = GUARD_INTERVAL_1_4; |
| break; |
| } |
| switch (val & 0x03) { |
| case 0: |
| p->transmission_mode = TRANSMISSION_MODE_2K; |
| break; |
| case 1: |
| p->transmission_mode = TRANSMISSION_MODE_8K; |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static int tda10048_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) |
| { |
| struct tda10048_state *state = fe->demodulator_priv; |
| struct tda10048_config *config = &state->config; |
| dprintk(1, "%s(%d)\n", __func__, enable); |
| |
| if (config->disable_gate_access) |
| return 0; |
| |
| if (enable) |
| return tda10048_writereg(state, TDA10048_CONF_C4_1, |
| tda10048_readreg(state, TDA10048_CONF_C4_1) | 0x02); |
| else |
| return tda10048_writereg(state, TDA10048_CONF_C4_1, |
| tda10048_readreg(state, TDA10048_CONF_C4_1) & 0xfd); |
| } |
| |
| static int tda10048_output_mode(struct dvb_frontend *fe, int serial) |
| { |
| struct tda10048_state *state = fe->demodulator_priv; |
| dprintk(1, "%s(%d)\n", __func__, serial); |
| |
| /* Ensure pins are out of tri-state */ |
| tda10048_writereg(state, TDA10048_CONF_TRISTATE1, 0x21); |
| tda10048_writereg(state, TDA10048_CONF_TRISTATE2, 0x00); |
| |
| if (serial) { |
| tda10048_writereg(state, TDA10048_IC_MODE, 0x80 | 0x20); |
| tda10048_writereg(state, TDA10048_CONF_TS2, 0xc0); |
| } else { |
| tda10048_writereg(state, TDA10048_IC_MODE, 0x00); |
| tda10048_writereg(state, TDA10048_CONF_TS2, 0x01); |
| } |
| |
| return 0; |
| } |
| |
| /* Talk to the demod, set the FEC, GUARD, QAM settings etc */ |
| /* TODO: Support manual tuning with specific params */ |
| static int tda10048_set_frontend(struct dvb_frontend *fe) |
| { |
| struct dtv_frontend_properties *p = &fe->dtv_property_cache; |
| struct tda10048_state *state = fe->demodulator_priv; |
| |
| dprintk(1, "%s(frequency=%d)\n", __func__, p->frequency); |
| |
| /* Update the I/F pll's if the bandwidth changes */ |
| if (p->bandwidth_hz != state->bandwidth) { |
| tda10048_set_if(fe, p->bandwidth_hz); |
| tda10048_set_bandwidth(fe, p->bandwidth_hz); |
| } |
| |
| if (fe->ops.tuner_ops.set_params) { |
| |
| if (fe->ops.i2c_gate_ctrl) |
| fe->ops.i2c_gate_ctrl(fe, 1); |
| |
| fe->ops.tuner_ops.set_params(fe); |
| |
| if (fe->ops.i2c_gate_ctrl) |
| fe->ops.i2c_gate_ctrl(fe, 0); |
| } |
| |
| /* Enable demod TPS auto detection and begin acquisition */ |
| tda10048_writereg(state, TDA10048_AUTO, 0x57); |
| /* trigger cber and vber acquisition */ |
| tda10048_writereg(state, TDA10048_CVBER_CTRL, 0x3B); |
| |
| return 0; |
| } |
| |
| /* Establish sane defaults and load firmware. */ |
| static int tda10048_init(struct dvb_frontend *fe) |
| { |
| struct tda10048_state *state = fe->demodulator_priv; |
| struct tda10048_config *config = &state->config; |
| int ret = 0, i; |
| |
| dprintk(1, "%s()\n", __func__); |
| |
| /* PLL */ |
| init_tab[4].data = (u8)(state->pll_mfactor); |
| init_tab[5].data = (u8)(state->pll_nfactor) | 0x40; |
| |
| /* Apply register defaults */ |
| for (i = 0; i < ARRAY_SIZE(init_tab); i++) |
| tda10048_writereg(state, init_tab[i].reg, init_tab[i].data); |
| |
| if (state->fwloaded == 0) |
| ret = tda10048_firmware_upload(fe); |
| |
| /* Set either serial or parallel */ |
| tda10048_output_mode(fe, config->output_mode); |
| |
| /* Set inversion */ |
| tda10048_set_inversion(fe, config->inversion); |
| |
| /* Establish default RF values */ |
| tda10048_set_if(fe, 8000000); |
| tda10048_set_bandwidth(fe, 8000000); |
| |
| /* Ensure we leave the gate closed */ |
| tda10048_i2c_gate_ctrl(fe, 0); |
| |
| return ret; |
| } |
| |
| static int tda10048_read_status(struct dvb_frontend *fe, enum fe_status *status) |
| { |
| struct tda10048_state *state = fe->demodulator_priv; |
| u8 reg; |
| |
| *status = 0; |
| |
| reg = tda10048_readreg(state, TDA10048_SYNC_STATUS); |
| |
| dprintk(1, "%s() status =0x%02x\n", __func__, reg); |
| |
| if (reg & 0x02) |
| *status |= FE_HAS_CARRIER; |
| |
| if (reg & 0x04) |
| *status |= FE_HAS_SIGNAL; |
| |
| if (reg & 0x08) { |
| *status |= FE_HAS_LOCK; |
| *status |= FE_HAS_VITERBI; |
| *status |= FE_HAS_SYNC; |
| } |
| |
| return 0; |
| } |
| |
| static int tda10048_read_ber(struct dvb_frontend *fe, u32 *ber) |
| { |
| struct tda10048_state *state = fe->demodulator_priv; |
| static u32 cber_current; |
| u32 cber_nmax; |
| u64 cber_tmp; |
| |
| dprintk(1, "%s()\n", __func__); |
| |
| /* update cber on interrupt */ |
| if (tda10048_readreg(state, TDA10048_SOFT_IT_C3) & 0x01) { |
| cber_tmp = tda10048_readreg(state, TDA10048_CBER_MSB) << 8 | |
| tda10048_readreg(state, TDA10048_CBER_LSB); |
| cber_nmax = tda10048_readreg(state, TDA10048_CBER_NMAX_MSB) << 8 | |
| tda10048_readreg(state, TDA10048_CBER_NMAX_LSB); |
| cber_tmp *= 100000000; |
| cber_tmp *= 2; |
| cber_tmp = div_u64(cber_tmp, (cber_nmax * 32) + 1); |
| cber_current = (u32)cber_tmp; |
| /* retrigger cber acquisition */ |
| tda10048_writereg(state, TDA10048_CVBER_CTRL, 0x39); |
| } |
| /* actual cber is (*ber)/1e8 */ |
| *ber = cber_current; |
| |
| return 0; |
| } |
| |
| static int tda10048_read_signal_strength(struct dvb_frontend *fe, |
| u16 *signal_strength) |
| { |
| struct tda10048_state *state = fe->demodulator_priv; |
| u8 v; |
| |
| dprintk(1, "%s()\n", __func__); |
| |
| *signal_strength = 65535; |
| |
| v = tda10048_readreg(state, TDA10048_NP_OUT); |
| if (v > 0) |
| *signal_strength -= (v << 8) | v; |
| |
| return 0; |
| } |
| |
| /* SNR lookup table */ |
| static struct snr_tab { |
| u8 val; |
| u8 data; |
| } snr_tab[] = { |
| { 0, 0 }, |
| { 1, 246 }, |
| { 2, 215 }, |
| { 3, 198 }, |
| { 4, 185 }, |
| { 5, 176 }, |
| { 6, 168 }, |
| { 7, 161 }, |
| { 8, 155 }, |
| { 9, 150 }, |
| { 10, 146 }, |
| { 11, 141 }, |
| { 12, 138 }, |
| { 13, 134 }, |
| { 14, 131 }, |
| { 15, 128 }, |
| { 16, 125 }, |
| { 17, 122 }, |
| { 18, 120 }, |
| { 19, 118 }, |
| { 20, 115 }, |
| { 21, 113 }, |
| { 22, 111 }, |
| { 23, 109 }, |
| { 24, 107 }, |
| { 25, 106 }, |
| { 26, 104 }, |
| { 27, 102 }, |
| { 28, 101 }, |
| { 29, 99 }, |
| { 30, 98 }, |
| { 31, 96 }, |
| { 32, 95 }, |
| { 33, 94 }, |
| { 34, 92 }, |
| { 35, 91 }, |
| { 36, 90 }, |
| { 37, 89 }, |
| { 38, 88 }, |
| { 39, 86 }, |
| { 40, 85 }, |
| { 41, 84 }, |
| { 42, 83 }, |
| { 43, 82 }, |
| { 44, 81 }, |
| { 45, 80 }, |
| { 46, 79 }, |
| { 47, 78 }, |
| { 48, 77 }, |
| { 49, 76 }, |
| { 50, 76 }, |
| { 51, 75 }, |
| { 52, 74 }, |
| { 53, 73 }, |
| { 54, 72 }, |
| { 56, 71 }, |
| { 57, 70 }, |
| { 58, 69 }, |
| { 60, 68 }, |
| { 61, 67 }, |
| { 63, 66 }, |
| { 64, 65 }, |
| { 66, 64 }, |
| { 67, 63 }, |
| { 68, 62 }, |
| { 69, 62 }, |
| { 70, 61 }, |
| { 72, 60 }, |
| { 74, 59 }, |
| { 75, 58 }, |
| { 77, 57 }, |
| { 79, 56 }, |
| { 81, 55 }, |
| { 83, 54 }, |
| { 85, 53 }, |
| { 87, 52 }, |
| { 89, 51 }, |
| { 91, 50 }, |
| { 93, 49 }, |
| { 95, 48 }, |
| { 97, 47 }, |
| { 100, 46 }, |
| { 102, 45 }, |
| { 104, 44 }, |
| { 107, 43 }, |
| { 109, 42 }, |
| { 112, 41 }, |
| { 114, 40 }, |
| { 117, 39 }, |
| { 120, 38 }, |
| { 123, 37 }, |
| { 125, 36 }, |
| { 128, 35 }, |
| { 131, 34 }, |
| { 134, 33 }, |
| { 138, 32 }, |
| { 141, 31 }, |
| { 144, 30 }, |
| { 147, 29 }, |
| { 151, 28 }, |
| { 154, 27 }, |
| { 158, 26 }, |
| { 162, 25 }, |
| { 165, 24 }, |
| { 169, 23 }, |
| { 173, 22 }, |
| { 177, 21 }, |
| { 181, 20 }, |
| { 186, 19 }, |
| { 190, 18 }, |
| { 194, 17 }, |
| { 199, 16 }, |
| { 204, 15 }, |
| { 208, 14 }, |
| { 213, 13 }, |
| { 218, 12 }, |
| { 223, 11 }, |
| { 229, 10 }, |
| { 234, 9 }, |
| { 239, 8 }, |
| { 245, 7 }, |
| { 251, 6 }, |
| { 255, 5 }, |
| }; |
| |
| static int tda10048_read_snr(struct dvb_frontend *fe, u16 *snr) |
| { |
| struct tda10048_state *state = fe->demodulator_priv; |
| u8 v; |
| int i, ret = -EINVAL; |
| |
| dprintk(1, "%s()\n", __func__); |
| |
| v = tda10048_readreg(state, TDA10048_NP_OUT); |
| for (i = 0; i < ARRAY_SIZE(snr_tab); i++) { |
| if (v <= snr_tab[i].val) { |
| *snr = snr_tab[i].data; |
| ret = 0; |
| break; |
| } |
| } |
| |
| return ret; |
| } |
| |
| static int tda10048_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks) |
| { |
| struct tda10048_state *state = fe->demodulator_priv; |
| |
| dprintk(1, "%s()\n", __func__); |
| |
| *ucblocks = tda10048_readreg(state, TDA10048_UNCOR_CPT_MSB) << 8 | |
| tda10048_readreg(state, TDA10048_UNCOR_CPT_LSB); |
| /* clear the uncorrected TS packets counter when saturated */ |
| if (*ucblocks == 0xFFFF) |
| tda10048_writereg(state, TDA10048_UNCOR_CTRL, 0x80); |
| |
| return 0; |
| } |
| |
| static int tda10048_get_frontend(struct dvb_frontend *fe, |
| struct dtv_frontend_properties *p) |
| { |
| struct tda10048_state *state = fe->demodulator_priv; |
| |
| dprintk(1, "%s()\n", __func__); |
| |
| p->inversion = tda10048_readreg(state, TDA10048_CONF_C1_1) |
| & 0x20 ? INVERSION_ON : INVERSION_OFF; |
| |
| return tda10048_get_tps(state, p); |
| } |
| |
| static int tda10048_get_tune_settings(struct dvb_frontend *fe, |
| struct dvb_frontend_tune_settings *tune) |
| { |
| tune->min_delay_ms = 1000; |
| return 0; |
| } |
| |
| static void tda10048_release(struct dvb_frontend *fe) |
| { |
| struct tda10048_state *state = fe->demodulator_priv; |
| dprintk(1, "%s()\n", __func__); |
| kfree(state); |
| } |
| |
| static void tda10048_establish_defaults(struct dvb_frontend *fe) |
| { |
| struct tda10048_state *state = fe->demodulator_priv; |
| struct tda10048_config *config = &state->config; |
| |
| /* Validate/default the config */ |
| if (config->dtv6_if_freq_khz == 0) { |
| config->dtv6_if_freq_khz = TDA10048_IF_4300; |
| printk(KERN_WARNING "%s() tda10048_config.dtv6_if_freq_khz is not set (defaulting to %d)\n", |
| __func__, |
| config->dtv6_if_freq_khz); |
| } |
| |
| if (config->dtv7_if_freq_khz == 0) { |
| config->dtv7_if_freq_khz = TDA10048_IF_4300; |
| printk(KERN_WARNING "%s() tda10048_config.dtv7_if_freq_khz is not set (defaulting to %d)\n", |
| __func__, |
| config->dtv7_if_freq_khz); |
| } |
| |
| if (config->dtv8_if_freq_khz == 0) { |
| config->dtv8_if_freq_khz = TDA10048_IF_4300; |
| printk(KERN_WARNING "%s() tda10048_config.dtv8_if_freq_khz is not set (defaulting to %d)\n", |
| __func__, |
| config->dtv8_if_freq_khz); |
| } |
| |
| if (config->clk_freq_khz == 0) { |
| config->clk_freq_khz = TDA10048_CLK_16000; |
| printk(KERN_WARNING "%s() tda10048_config.clk_freq_khz is not set (defaulting to %d)\n", |
| __func__, |
| config->clk_freq_khz); |
| } |
| } |
| |
| static const struct dvb_frontend_ops tda10048_ops; |
| |
| struct dvb_frontend *tda10048_attach(const struct tda10048_config *config, |
| struct i2c_adapter *i2c) |
| { |
| struct tda10048_state *state = NULL; |
| |
| dprintk(1, "%s()\n", __func__); |
| |
| /* allocate memory for the internal state */ |
| state = kzalloc(sizeof(struct tda10048_state), GFP_KERNEL); |
| if (state == NULL) |
| goto error; |
| |
| /* setup the state and clone the config */ |
| memcpy(&state->config, config, sizeof(*config)); |
| state->i2c = i2c; |
| state->fwloaded = config->no_firmware; |
| state->bandwidth = 8000000; |
| |
| /* check if the demod is present */ |
| if (tda10048_readreg(state, TDA10048_IDENTITY) != 0x048) |
| goto error; |
| |
| /* create dvb_frontend */ |
| memcpy(&state->frontend.ops, &tda10048_ops, |
| sizeof(struct dvb_frontend_ops)); |
| state->frontend.demodulator_priv = state; |
| |
| /* set pll */ |
| if (config->set_pll) { |
| state->pll_mfactor = config->pll_m; |
| state->pll_nfactor = config->pll_n; |
| state->pll_pfactor = config->pll_p; |
| } else { |
| state->pll_mfactor = 10; |
| state->pll_nfactor = 3; |
| state->pll_pfactor = 0; |
| } |
| |
| /* Establish any defaults the the user didn't pass */ |
| tda10048_establish_defaults(&state->frontend); |
| |
| /* Set the xtal and freq defaults */ |
| if (tda10048_set_if(&state->frontend, 8000000) != 0) |
| goto error; |
| |
| /* Default bandwidth */ |
| if (tda10048_set_bandwidth(&state->frontend, 8000000) != 0) |
| goto error; |
| |
| /* Leave the gate closed */ |
| tda10048_i2c_gate_ctrl(&state->frontend, 0); |
| |
| return &state->frontend; |
| |
| error: |
| kfree(state); |
| return NULL; |
| } |
| EXPORT_SYMBOL(tda10048_attach); |
| |
| static const struct dvb_frontend_ops tda10048_ops = { |
| .delsys = { SYS_DVBT }, |
| .info = { |
| .name = "NXP TDA10048HN DVB-T", |
| .frequency_min = 177000000, |
| .frequency_max = 858000000, |
| .frequency_stepsize = 166666, |
| .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | |
| FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | |
| FE_CAN_QPSK | FE_CAN_QAM_16 | FE_CAN_QAM_64 | FE_CAN_QAM_AUTO | |
| FE_CAN_HIERARCHY_AUTO | FE_CAN_GUARD_INTERVAL_AUTO | |
| FE_CAN_TRANSMISSION_MODE_AUTO | FE_CAN_RECOVER |
| }, |
| |
| .release = tda10048_release, |
| .init = tda10048_init, |
| .i2c_gate_ctrl = tda10048_i2c_gate_ctrl, |
| .set_frontend = tda10048_set_frontend, |
| .get_frontend = tda10048_get_frontend, |
| .get_tune_settings = tda10048_get_tune_settings, |
| .read_status = tda10048_read_status, |
| .read_ber = tda10048_read_ber, |
| .read_signal_strength = tda10048_read_signal_strength, |
| .read_snr = tda10048_read_snr, |
| .read_ucblocks = tda10048_read_ucblocks, |
| }; |
| |
| module_param(debug, int, 0644); |
| MODULE_PARM_DESC(debug, "Enable verbose debug messages"); |
| |
| MODULE_DESCRIPTION("NXP TDA10048HN DVB-T Demodulator driver"); |
| MODULE_AUTHOR("Steven Toth"); |
| MODULE_LICENSE("GPL"); |